Advanced Biomedical Technologies Inc. - Quarter Report: 2021 July (Form 10-Q)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D. C. 20549

FORM 10-Q

For the quarter ended July 31, 2021

OR

Commission file number 000-53051

Advanced BioMedical Technologies, Inc.

(Exact name of registrant as specified in its charter)

Nevada

(State or other jurisdiction of incorporation or organization)

200 Park Avenue, Suite 1700

New York City, NY 10166

(Address of principal executive offices, including zip code.)

(718) 766-7898

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a small reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “small reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

As of September 13, 2021, there are 70,224,850 shares of common stock outstanding.

All references in this Report on Form 10-Q to the terms “we”, “our”, “us”, the “Company”, “ABMT” and the “Registrant” refer to Advanced BioMedical Technologies, Inc. unless the context indicates another meaning.

TABLE OF CONTENTS

PART I – FINANCIAL INFORMATION

ITEM 1. FINANCIAL STATEMENTS

The accompanying condensed consolidated unaudited financial statements of Advanced BioMedical Technologies, Inc., a Nevada corporation are condensed and, therefore, do not include all disclosures normally required by accounting principles generally accepted in the United States of America. These statements should be read in conjunction with the Company’s most recent annual financial statements for the year ended October 31, 2020 included in our Annual Report on Form 10-K filed with the U.S. Securities and Exchange Commission (“SEC”) on January 29, 2021. In the opinion of management, all adjustments necessary for a fair presentation have been included in the accompanying condensed consolidated financial statements and consist of only normal recurring adjustments. The results of operations presented in the accompanying condensed consolidated financial statements for the period ended July 31, 2021 are not necessarily indicative of the operating results that may be expected for the full year ending October 31, 2021.

ADVANCED BIOMEDICAL TECHNOLOGIES, INC.

AND SUBSIDIARIES

CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

AS OF JULY 31, 2021

(UNAUDITED)

ADVANCED BIOMEDICAL TECHNOLOGIES, INC.

AND SUBSIDIARIES

CONTENTS

ADVANCED BIOMEDICAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED BALANCE SHEETS

The accompanying notes are an integral part of these consolidated financial statements

ADVANCED BIOMEDICAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE LOSS

(UNAUDITED)

The accompanying notes are an integral part of these consolidated financial statements

ADVANCED BIOMEDICAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ DEFICIT (UNAUDITED)

The accompanying notes are an integral part of these consolidated financial statements

ADVANCED BIOMEDICAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(UNAUDITED)

The accompanying notes are an integral part of these consolidated financial statements

ADVANCED BIOMEDICAL TECHNOLOGIES, INC.

AND SUBSIDIARIES

NOTES TO THE CONDENSED CONSOLIDATED

FINANCIAL STATEMENTS (UNAUDITED)

The accompanying unaudited condensed consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America for interim financial information and rules and regulations of the U.S. Securities and Exchange Commission (“SEC”). Accordingly, they do not include all of the information and footnotes required by generally accepted accounting principles for complete financial statements.

In the opinion of the management, the unaudited condensed consolidated financial statements contain adjustments considered necessary to present fairly the Company’s financial position as of July 31, 2021, the consolidated results of operations for the three and nine months ended July 31, 2021 and 2020 and consolidated statements of cash flows for the nine months ended July 31, 2021 and 2020 on an accrual basis and in accordance with accounting principles generally accepted in the United States of America for interim financial information and rules and regulations of the SEC. The consolidated results for the three and nine months ended July 31, 2021 are not necessarily indicative of the results to be expected for the entire fiscal year ending October 31, 2021. These consolidated financial statements should be read in conjunction with the consolidated financial statements and notes for the year ended October 31, 2020 appearing in the Company’s annual report on Form 10-K as filed with the Securities and Exchange Commission on Jan 29, 2021

The reporting currency of the Company is US dollar.

Advanced BioMedical Technologies, Inc. (fka “Geostar Mineral Corporation” or “Geostar”) (“ABMT”) was incorporated in Nevada on September 12, 2006.

Shenzhen Changhua Biomedical Engineering Company Limited (“Shenzhen Changhua”) was incorporated in the People’s Republic of China (“PRC”) on September 25, 2002 as a limited liability company with a registered capital of $724,017. Shenzhen Changhua is owned by two stockholders in the proportion of 70% and 30% respectively.

Shenzhen Changhua has been involved in the development of polymer screws, rods and binding wires for fixation on human fractured bones. The Company is currently involved in researching, manufacturing and conducting clinical trials on its products and intends to raise additional capital to produce and market its products commercially. The Company holds one Class III permit, one Class II permit and one Class I permit from the National Medical Products Administration of the PRC (“NMPA”), formally the China Food and Drug Administration (“CFDA”) and the State Food and Drug Administration (“SFDA”) of the PRC. The Company holds four patents issued by the State Intellectual Property Office of the P.R.C. (“SIPO”).

Masterise Holdings Limited (“Masterise”) was incorporated in the British Virgin Islands on May 31, 2007 as an investment holding company and was then owned as to 63% by the spouse of Shenzhen Changhua’s 70% majority stockholder at the time and 37% by a third party corporation.

On January 29, 2008, Masterise entered into a Share Purchase Agreement (“the Agreement”) with a stockholder of Shenzhen Changhua whereupon Masterise acquired 70% of Shenzhen Changhua for US$64,100 in cash. The acquisition was completed on February 25, 2008. As both Masterise and Shenzhen Changhua were under common control and management, the acquisition was accounted for as a reorganization of entities under common control. Accordingly, the operations of Shenzhen Changhua were included in the consolidated financial statements as if the transactions had occurred retroactively.

On December 31, 2008, ABMT consummated a Share Exchange Agreement (“the Exchange Agreement”) with the stockholders of Masterise pursuant to which ABMT issued 50,000 shares of Common Stock to the stockholders of Masterise for 100% equity interest in Masterise.

Concurrently, on December 31, 2008, a major stockholder of ABMT also consummated an Affiliate Stock Purchase Agreement (the “Affiliate Agreement”) with thirteen individuals including all the stockholders of Masterise, pursuant to which the major stockholder sold a total of 5,001,000 shares of ABMT’s common stock for a total aggregate consideration of $5,000, including 4,438,250 shares to the stockholders of Masterise.

On consummation of the Exchange Agreement and the Affiliate Agreement, the 70% majority stockholder of Masterise became an 80.7% stockholder of ABMT.

On March 13, 2009, the name of the Company was changed from Geostar Mineral Corporation to Advanced Biomedical Technologies, Inc.

The merger of ABMT and Masterise was treated for accounting purposes as a capital transaction and recapitalization by Masterise (“the accounting acquirer”) and a re-organization by ABMT (“the accounting acquiree”). The financial statements have been prepared as if the re-organization had occurred retroactively.

Accordingly, these financial statements include the following:

ABMT, Masterise and Shenzhen Changhua are hereinafter referred to as (“the Company”).

The accompanying condensed consolidated financial statements include the financial statements of ABMT and its wholly owned subsidiaries, Masterise and its 70% owned subsidiary, Shenzhen Changhua. The non-controlling interests in periods prior to 2012 represent the non-controlling stockholders’ 30% proportionate share of the results of Shenzhen Changhua.

All significant inter-company balances and transactions have been eliminated in consolidation.

The preparation of the financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amount of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

As of July 31, 2021 and October 31, 2020, the Company owed a stockholder $915,627 and $880,108 respectively which are unsecured and repayable on demand. Interests are charged at 7% per annum on the amount owed.

As of July 31, 2021 and October 31, 2020, the Company owed four related parties a total of $5,433,540 and $4,705,512 respectively which are unsecured and repayable on demand. Interests are charged at 7% per annum on the amounts owed.

Total interest expenses on advances from a stockholder and the related parties accrued for the three and nine months ended July 31, 2021 and 2020 were $76,885, $79,615, $225,581, and $239,946 respectively.

As of July 31, 2021 and October 31, 2020, the Company owed $347,889 and $308,031 respectively, to three directors for advances made on an unsecured basis, repayable on demand and interest free.

Imputed interest charged at 5% per annum on the amounts owed to two directors is $4,049, $3,409, $11,428 and $10,205 for the three and nine months ended July 31, 2021 and 2020 respectively.

Sales for the three and nine months ended 31 July 2021 and 2020 of US$180, US$961, US$47,508 and US$48,491 and nil respectively were made to a company in which Mr. Chen Tie Jun has a significant equity interest.

Leases

Pursuant to ASC 842, the Company measures right-of-use assets and recognizes lease liabilities for all leases, with exemptions for low-value assets and short-term leases of 12 months or less. The Company recognises lease liabilities and the underlying right-of-use assets in respect of two operating leases with unrelated parties for factory space and director’s quarter in the P.R.C., which are non-cancelable and expiring on dates between 28 March 2021 and 30 April 2022, and do not include options to renew. The depreciable life of right-of use assets are limited by the term of leases.

As of July 31, 2021, the Company has future lease payments as follows:

 SCHEDULE OF FUTURE MINIMUM LEASE OBLIGATIONS OF OPERATING LEASES

Capital commitments

As of July 31, 2021, the Company has no outstanding capital commitments.

The Financial Accounting Standards Board (FASB) Codification Topic 825 (ASC Topic 825), “Disclosure About Fair Value of Financial Instruments” requires certain disclosures regarding the fair value of financial instruments. The carrying amounts of other receivables and prepaid expenses, other payables and accrued liabilities and due to a stockholder, directors and related parties approximate their fair values because of the short-term nature of the instruments. The management of the Company is of the opinion that the Company is not exposed to significant interest or credit risks arising from these financial statements.

There has been no newly effective accounting pronouncement that has significance, or potential significance, to our consolidated financial statements.

The Company has reviewed all recently issued, but not yet effective, accounting pronouncements and does not believe the future adoptions of any such pronouncements may be expected to cause a material impact on the financial condition or the results of operations. The Company will carefully analyze these recently accounting pronouncements and take action to adopt them as required.

As reflected in the accompanying unaudited condensed consolidated financial statements, the Company has an accumulated deficit of $10,816,210 as of July 31, 2021 and which includes a net loss of $559,846 for the nine months ended July 31, 2021. As of July 31, 2021, the Company’s total current liabilities exceeded its total current assets by $8,336,260 and the Company used cash in operations of $743,038 for the nine months ended on that date. These factors raise substantial doubt about its ability to continue as a going concern. In view of the matters described above, recoverability of a major portion of the recorded asset amounts shown in the accompanying condensed consolidated balance sheet is dependent upon continued operations of the Company, which in turn is dependent upon the Company’s ability to raise additional capital, obtain financing and succeed in its future operations. The financial statements do not include any adjustments relating to the recoverability and classification of recorded asset amounts or amounts and classification of liabilities that might be necessary should the Company be unable to continue as a going concern.

Management has taken the following steps to revise its operating and financial requirements, which it believes are sufficient to provide the Company with the ability to continue as a going concern. The Company is actively pursuing additional funding and strategic partners, which will enable the Company to implement its business plan. Management believes that these actions as successful will allow the Company to continue its operations through the next fiscal year.

ITEM 2. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Forward Looking Statements

This section of the report includes a number of forward-looking statements that reflect our current views with respect to future events and financial performance. Forward-looking statements are often identified by words like: believe, expect, estimate, anticipate, intend, project and similar expressions, or words which, by their nature, refer to future events. Actual results could differ materially from those anticipated in these forward looking statements as a result of any number of factors, including those set forth in this Quarterly Report, and in the Company’s most recent Annual Report on Form 10-K filed on January 29, 2021.

All written and oral forward-looking statements made in connection with this Quarterly Report on Form 10-Q that are attributable to us or persons acting on our behalf are expressly qualified in their entirety by these cautionary statements. Given the uncertainties that surround such statements, you are cautioned not to place undue reliance on such forward-looking statements, which apply only as of the date of this quarterly report. These forward-looking statements are subject to certain risks and uncertainties that could cause actual results to differ materially from historical results or our predictions.

Overview

The following discussion is an overview of the important factors that management focuses on in evaluating our businesses, financial condition and operating performance and should be read in conjunction with the financial statements included in this Quarterly Report on Form 10-Q.

The Company is subject to a number of risks similar to other companies in the medical device industry. These risks include but are not limited to rapid technological change, uncertainty of market acceptance of our products, uncertainty of regulatory approval, competition from substitute products and larger companies, the need to obtain additional financing, compliance with government regulation, protection of proprietary technology, product liability, and the dependence on key individuals.

Our Business

We are engaged in the business of designing, developing, manufacturing and marketing of biomaterial internal fixation devices. We hold one Class III medical device permit from the National Medical Products Administration of the PRC (“NMPA”) for our product - polymer orthopaedic internal fixation screws, one Class II permit and one Class I permit. We hold four patents issued by the State Intellectual Property Office of the P.R.C. (“SIPO”). Our polyamide materials, their uses and manufacturing processes are protected by Patent No. ZL201511006236.7 and ZL971190739. Patent No. ZL201410647464.1 titled “Bone Fracture Plate Made of High Polymer Materials” and patent No. ZL201511005531.0 titled “Composite fiber, manufacturing method and orthopaedic binding wire” were granted to us in 2018 and 2020 respectively. Our polyamide materials are used in producing screws, binding wires, rods and related products. These products are used in a variety of applications including orthopaedic trauma, sports related medical treatment, or cartilage injuries, and reconstructive dental procedures. At this time, our company is the sole patent holder and market permit holder of PA technologies in China, as well as the only company currently engaged in clinical trials, manufacturing and marketing for PA orthopaedic internal fixation devices in the PRC. Our products are made of a very unique material called PA6-P(MMA-CO-NVP)-HA (“PA”). Our PA products, such as screws, binding wires, rods, suture anchors and rib-pins consist of enhanced fibers and high molecular polymers which are designed to facilitate quick healing of complex fractures in many areas of the human skeletal system.

Our products offer a number of significant advantages over existing metal implants and the first generation of degradable implants (i.e. PLLA) for patients, surgeons and other customers including:

Our products are designed to replace the traditional internal fixation device made of stainless steel and titanium and overcome the limitations of previous generations of products such as PLA and PLLA. Our laboratory statistics show that our PA products have a higher mechanical strength, last longer in degradation ratio and are more evenly absorbed form outer layer inwards as compared with similar materials such as PLA and PLLA. Thus PA allows increased restoration time for bone healing and re-growth. The Company’s polymer orthopaedic internal fixation screws received approval from the National Medical Products Administration of the PRC (“NMPA”) in April 2018. We launched our sales campaign at the end of our fiscal year ended October 31, 2019 and achieved a milestone in the Company’s history by generating revenue through the sales of our PA Screws.

NMPA Application Process and Approval for Polymer Screws

The Company first submitted its application for PA Screws to the NMPA (formerly the SFDA/CFDA) in 2008. The application has been withheld by the NMPA pending additional clinical trial cases. This is due to the amended NMPA regulations, which unlike previous regulations require the applicant to specify the position on the body where the clinical trial is carried out. Our amended NMPA application has specified the ankle fracture as the body part of our clinical trial. This is because bones around this part carry most of the body weight.

Due to the uniqueness of our material, there were no established NMPA Product Standards that we could follow during our application process for our PA Screws. To establish our own Product Standards, the Company had been carrying out extra tests. The Company submitted its Product Standards and supplementary reports to the NMPA in 2014. In December 2016, the Company received a notice from the NMPA requesting supplementary report as part of the review process. The Company completed the supplementary report and submitted it to the NMPA in June 2017.

In April 2018, the Company’s application for its PA Screws was approved by the NMPA in China (Medical Device Certification Number: 20183460133).

Process of Human Trials

As of July 31, 2021, for medical study and comparison purpose, the Company has completed a total of 83 successful clinical human trial cases, including 71 cases on ankle fractures and 57 successful PA Binding Wire trial cases. We have been conducting human trials at the 6 state level hospitals recognized by NMPA for clinical trials in different cities throughout China; including Nanchang, Changsha, Luoyang, Nanning and Tianjin. The cities and provinces where our clinical trial hospitals are based will be the initial target regions on our marketing plan. These regions are both densely populated and have experienced high or above medium economic growth. The clinical trials for the Company’s PA Screws have been completed with 100 percent success rate. Having gained NMPA approval for PA Screws, the Company is planning to start clinical trials on series of orthopaedic products the Company has developed using the same unique biomaterial.

Government Regulation

Medical implant devices/products manufactured or marketed by the Company in China are subject to extensive regulations by the NMPA. Pursuant to the related laws and acts, as amended, and the regulations promulgated there under (the “NMPA Regulations”), the NMPA regulates the clinical testing, manufacture, labeling, distribution and promotion of medical devices. The NMPA also has the authority to request repair, replacement, or refund of the cost of any device manufactured or distributed by the Company.

Under the NMPA Regulations, medical devices are classified into three classes (class I, II or III), the basis of the controls deemed necessary by the NMPA to reasonably assure their safety and efficacy. Under the NMPA’s regulations, class I devices are subject to general controls (for example, labeling and adherence to Good Manufacturing Practices (“GMP”) requirements) and class II devices are subject to general and special controls. Generally, class III devices are those which must receive premarket approval by the NMPA to ensure their safety and efficacy (for example, life-sustaining, life-supporting and certain implantable devices, or new devices which have not been found substantially equivalent to legally marketed class I or class II devices). The Company is classified as a manufacturer of class III medical devices. Current NMPA enforcement policy prohibits the marketing of approved medical devices for unapproved uses.

Before a new device can be introduced into the market in China, the manufacturer generally must obtain NMPA marketing clearance through clinical trials. Since the Company is classified as a manufacturer of Class III medical devices, the Company must carry out all clinical trials in pre-selected NMPA approved hospitals.

Manufacturers of medical devices for marketing in China are required to adhere to GMP requirements. Enforcement of GMP requirements has increased significantly in the last several years and the NMPA has publicly stated that compliance will be more strictly scrutinized. From time to time the NMPA has made changes to the GMP and other requirements that increase the cost of compliance. Changes in existing laws or requirements or adoption of new laws or requirements could have a material adverse effect on the Company’s business, financial condition and results of operations. There can be no assurance that the Company will not incur significant costs to comply with applicable laws and requirements in the future or that applicable laws and requirements will not have a material adverse effect upon the Company’s business, financial condition and results of operations.

Regulations regarding the development, manufacturing and sale of the Company’s products are subject to change. The Company cannot predict the impact, if any, that such changes might have on its business, financial condition and results of operations.

Results of Operations

The “Results of Operations” discussed in this section merely reflect the information and results of the Company for the period from September 25, 2002 (Shenzhen Changhua’s date of inception) to July 31, 2021 and 2020.

Revenues

Our revenue for the three and nine months ended July 31, 2021 and 2020 were $180, $961, $47,508 and $61,251 respectively.

Our management team is continuously looking for fundraising possibilities for sales and marketing expansion, product improvement, machinery upgrades, facility expansions and continuous research and development.

Estimate current production lines in full capacity

Our facility is located in Shenzhen, China, which is built to meet the GMP standards. Our facility covers about 865 square meters, which includes the combined facilities of offices, laboratories, and workshops. There is one production line for the PA Screw and another production line for the PA Binding Wire. The annual production capabilities of each production line are 100,000 pieces for PA Screw, and 240,000 packs for the PA Binding Wires. Both production lines, at their maximum production capacities are capable of generating approximately $30,000,000 in annual revenue.

China’s Marketing Analysis:

We have established long term relationships with many hospitals and national distributors in China. Ms. Hui Wang, the Company’s CEO, has over 25 years’ sales experience in medical distribution. Professor Shangli Liu, our chief medical advisor, is one of the highest ranked orthopedic doctors in China as well as being highly renowned in the rest of the world. He will assist the Company in nationwide product promotion and joint projects with associated academic institutions and medical schools. During product development and clinical trial stages, we developed close relationships with many major national hospitals. We expect these relationships to boost our revenue generation.

China’s market for PA devices depends on 3 major conditions:

- Patients

- Advanced technology level

- Performance and price of the materials

China has gradually entered the Old Age Society. It is expected that there will be 245 million people over 60 years of age by 2020, and, according to the survey of 50 years old, the incidence of osteoporosis is as high as 60%, accompanied by osteoporosis, fracture, bone necrosis, disability and other diseases, resulting in continued high demand of orthopaedic implant medical devices. (Source: The UN; Shenwan Hongyuan Securities research report).

The Company has advantages and more opportunities over others competitors due to:

- No other similar patent registrations in China.

- We are the only company to receive market approval and permission to perform PA clinical trials by the NMPA to the best of our knowledge.

- We have a timing advantage over other Chinese companies; other companies would need to successfully complete preclinical testing for the NMPA in order to obtain clinical trial permits.

- Under new regulations by the NMPA, it will take at least 5-10 years for clinical trials of new materials.

- Our patented material enables us to rapidly diversify our product line according to market trend and demand.

Number of Hospitals at the end of November 2020 Statistic and Census report by the National Health Commission of the People’s Republic of China.

In general, technological advancements and the marketing potential within Asia are the biggest factors in driving significant growth within the global orthopedic devices market. Another major factor that positively influences this market is the growing number of aging baby boomers with active lifestyles. This sector represents a large portion of the total population.

Cost of Sales

Cost of sales for the three and nine months ended July 31, 2021 and 2020 were $38, $820, $10,217 and $33,831 respectively. The main components of cost of sales are expenses for attending exhibitions/trade shows and staff costs.

Gross Profits

Gross profits for the three and nine months ended July 31, 2021 and 2020 were $142, $141, $37,291 and $27,420 respectively.

Operating Expenses

Operating expenses for the three and nine months ended July 31, 2021 and 2020 were $111,914, $116,582, $350,855 and $363,840 respectively.

Research and Development

Research and development costs related to both present and future products are expensed as incurred. Total expenditure on research and development charged to general and administrative expenses for the three and nine months ended July 31, 2021 and 2020 were $54,633, $42,773, $178,086 and $140,858. The main component of research and development costs is staff costs of the technical personnel on product improvements to enhance industrial design.

We expect research and development expenses to grow as we continue to invest in basic research, clinical trials, product development and in our intellectual property. The Company will be working closely with medical institutions and research universities to expedite future clinical trials of upcoming series of polymer fixation devices, including Intramedullary Nailing Fixation, Binding Wires, Micromodule Screws & Plates, Maxillofacial & Craniofacial Plates, and Rib Pins.

Marketing Strategy

The Company has been conducting Pre-Market Research before its PA Screws application was approved by the NMPA in April 2018. The research is intended to estimate the potential market success of the company’s products that can be expected. The research also beyond the Company’s initial market - China, and covers international markets. Based on the results of our Pre-Market Research and the positive feedbacks we have received from trade shows and industrial conferences, it is the Company’s intention to apply for additional international regulatory approvals in due course.

The Company will market its products through a hybrid sales force comprised of a managed network of independent regional distributors/sales agents (80%) and direct sales representatives (20%) in China.

There are two ways the Company will generate revenue, 1) through our nationwide and regional distributors and 2) through our direct sales channels.

Impact of COVID-19 Outbreak

The Company’s primary business is carried out through its subsidiary, Shenzhen Changhua Biomedical Engineering Co., Ltd. (“Shenzhen Changhua”), based in Shenzhen, China, where the COVID-19 pandemic started in January 2020.

The Company has identified the following areas that had been adversely affected by COVID-19:

The Company has been working with its business partners and workforce through crisis planning, effective communication and co-operation to minimize the negative impact of the COVID-19 pandemic.

Other Income and Expenses

Total other (expenses) income, for the three and nine months ended July 31, 2021 and 2020 were ($86,941), ($88,784), ($246,282) and ($142,246) respectively. There was no significant changes in total other income and expenses for the three and nine months ended July 31, 2021 except that during the nine months ended July 31, 2020, the Company received a Biomedical Incentive Award of US$125,237 from the government of Shenzhen Longgang District where our facilities are located, in recognition of the Company’s achievement of obtaining a Class III medical device permit from China’s NMPA. The remaining other expenses comprised mainly interest expenses with no significant differences between the relevant periods of 2021 and 2020.

Finance Costs

As of July 31, 2021 and October 31, 2020, a stockholder and four related parties had loaned a total of $6,349,167 and $5,585,620 respectively to the Company as unsecured loans repayable on demand and interest is charged at 7% per annum on the amount due. Total interest expenses on advances from a stockholder and the related parties accrued for the three and nine months ended July 31, 2021 and 2020 were $76,885, $79,615, $225,581 and $239,946 respectively.

As of July 31, 2021 and October 31, 2020, the Company owed $347,889 and $308,031 respectively to the directors for advances made on an unsecured basis, repayable on demand. Total imputed interest expenses on advances from the directors, calculated at 5% per annum, recorded as additional paid-in capital amounted to $4,049, $3,409, $11,428 and $10,205 for the three and nine months ended July 31, 2021 and 2020 respectively.

Net Loss

The net loss attributable to common stockholders for the three and nine months ended July 31, 2021 and 2020 were $213,501, $280,767, $792,746 and $532,914 respectively. We started to generate revenue at the end of our fiscal year from inception to October 31, 2019 before our sales campaign was disrupted by the COVID-19 pandemic, but we have to incur operating expenses for the upkeep of the Company and the clinical trials.

Liquidity and Capital Resources

We had a working capital deficit of $8,336,260 and $7,533,045 as of July 31, 2021 and October 31, 2020 respectively. Our working capital deficit increased as a result of the fact that we only started to market of our NMPA approved PA Screw in China at the end of 2019 fiscal year, and the company has to put resources to market its products, complete the clinical trials of other products. Although we began to generate revenues at the end of 2019 fiscal year, our marketing campaign was disrupted by the COVID-19 pandemic and the revenue income was not sufficient. Our main source of financing during the year came in the form of PA Screws sales and loan from our related parties and stockholders.

Cash Flows

Net Cash Used in Operating Activities

Net cash used in operating activities was $743,038 and $105,512 in the nine months ended July 31, 2021 and 2020 respectively. This amount was attributable primarily to the net loss after adjustment for non-cash items, such as depreciation, loss on disposal of property and equipment, imputed interest on advances from directors, and stock-based compensation expenses. The change in operating assets and liabilities include inventory, other receivables and prepaid expenses, trade payable and contract liabilities and other payables and accrued expenses. In short, cash used in operating activities increased were a result of increased in operating loss, build-up of inventory, increment in other receivables and prepared expenses assets, and reduction in trade payables and contract liabilities while slightly offset by other payables and accrued expenses liabilities. Other items had no significant changes.

Net Cash Used in Investing Activities

We recorded net cash used of $51,449 and $29,692 in investing activities in the nine months ended July 31, 2021 and 2020 respectively. This amount reflected purchases of property and equipment, primarily for research and development to our facilities.

Net Cash Provided by Financing Activities

Net cash provided by financing activities in the nine months ended July 31, 2021 and 2020 was $593,760 and $143,975 respectively, which represented advances from a stockholder, directors and related parties, payment to operating lease with principal and interest. The significant increase in the cash provided by financing activities was loan from related parties which was the current financing source of the Company.

Operating Capital and Capital Expenditure Requirements

Our ability to continue as a going concern and support the commercialization of current products is dependent upon our ability to market our product while obtaining additional financing in the near term. We anticipate that such funding will be in the form of marketing of our products and equity financing from sales of our common stock. However, there is no assurance that we will be able to raise sufficient funding from the sale of our products and common stock to fund our business plan should we decide to proceed. We anticipate our sales revenue will not meet our financial needs in 2021 and we need to rely on advances from our related parties and stockholders in order to continue to fund our business operations.

We believe that our existing cash, cash equivalents at July 31, 2021, will be insufficient to meet our cash needs. Our minimum cash requirement for the next 12 months is projected to be $800,000. This amount may increase if we decide to start clinical trials on new products. The management is actively pursuing additional funding and strategic partners, which will enable the Company to implement our business plan, business strategy, to continue research and development, clinical trials or further development that may arise.

We intend to spend more to support the commercialization of current products and on research and development activities, including new products development, regulatory and compliance, clinical studies, and the enhancement and protection of our intellectual property portfolio.

OFF-BALANCE SHEET ARRANGEMENTS

We do not have any off-balance sheet arrangements that have or are reasonably likely to have a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that are material to our investors.

CRITICAL ACCOUNTING POLICIES

The preparation of our financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates, including but not limited to those related to income taxes and impairment of long-lived assets. We base our estimates on historical experience and on various other assumptions and factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Based on our ongoing review, we plan to adjust to our judgments and estimates where facts and circumstances dictate. Actual results could differ from our estimates.

We believe the following critical accounting policies are important to the portrayal of our financial condition and results and require our management’s most difficult, subjective or complex judgments, often because of the need to make estimates about the effect of matters that are inherently uncertain.

RECENT ACCOUNTING PRONOUNCEMENTS

There has been no newly effective accounting pronouncement that has significance, or potential significance, to our consolidated financial statements.

The Company has reviewed all recently issued, but not yet effective, accounting pronouncements and does not believe the future adoptions of any such pronouncements may be expected to cause a material impact on the financial condition or the results of operations. The Company will carefully analyze these recently accounting pronouncements and take action to adopt them as required.

ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are a smaller reporting company as defined by Rule 12b-2 of the Exchange Act and are not required to provide the information required under this item.

ITEM 4. CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures

We have established disclosure controls and procedures, as such term is defined in Rule 13a-15(e) under the Securities Exchange Act of 1934. Our disclosure controls and procedures are designed to ensure that material information relating to us, including our consolidated subsidiaries, is made known to our principal executive officer and principal financial officer by others within our organization. Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an evaluation of the effectiveness of our disclosure controls and procedures as of July 31, 2021 to ensure that the information required to be disclosed by us in the reports that we file or submit under the Securities Exchange Act of 1934 is recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by us in the reports that we file or submit under the Securities Exchange Act of 1934 is accumulated and communicated to our management, including our principal executive officer and principal financial officer as appropriate, to allow timely decisions regarding required disclosure. Based on this evaluation, our principal executive officer and principal financial officer concluded that our disclosure controls and procedures were not effective as of July 31, 2021.

Under the supervision and with the participation of our then principal executive officer and principal financial officer, we conducted an evaluation of our disclosure controls and procedures, as such term is defined under Rule 13a-15(e) and Rule 15d-15(e) promulgated under the Securities Exchange Act of 1934, as amended, as of July 31, 2021. Based on this evaluation, the management concluded that the disclosure controls and procedures were ineffective at such time to ensure that information required to be disclosed by the company in the reports filed or submitted under the Exchange Act were recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms. Our principal executive officer and principal financial officer also concluded that our disclosure controls, which are designed to ensure that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is accumulated and communicated to management, were inappropriate to allow timely decisions regarding required disclosure.

Based on officers’ assessment, the Company determined that there were material weaknesses in its internal control over financial reporting as of July 31, 2021 based on the material weaknesses described below:

● Because the Company consists of one person who acts as the financial officer, operating officer, secretary and director of the Company, there are limited controls over information processing.

● There is an inadequate segregation of duties consistent with control objectives as financial reporting function is composed of only one person. In order to remedy this situation, we would need to hire additional staff to provide greater segregation of duties. Currently, it is not feasible to hire additional staff to obtain optimal segregation of duties. Management will reassess this matter after the Company have obtained additional financial resources to determine whether improvement in segregation of duty is feasible.

● The Company does not have a formal audit committee with a financial expert, and thus the Company lacks the Board oversight role within the financial reporting process.

● There is a lack of formal policies and procedures necessary to adequately review significant accounting transactions.

The Company utilizes a third-party independent contractor for the preparation of its financial statements. Although the financial statements and footnotes are reviewed by our management, we do not have a formal policy to review significant accounting transactions and the accounting treatment of such transactions. The third-party independent contractor is not involved in the day to day operations of the Company and may not have obtained or provided financial information from and to the management on a timely basis to allow for adequate reporting/consideration of certain transactions.

As a result of this material weakness, our management concluded that our internal control over financial reporting was not effective as of July 31, 2021. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis. A significant deficiency is a deficiency, or a combination of deficiencies, in internal control over financial reporting that is less severe than a material weakness; yet important enough to merit attention by those responsible for oversight of the company’s financial reporting.

Changes in Internal Control

During the most recently completed fiscal quarter, there has been no change in the Company’s internal control over financial reporting that has materially affected, or is reasonably likely to materially affect, its internal control over financial reporting.

PART II – OTHER INFORMATION

ITEM 1. LEGAL PROCEEDINGS

Currently we are not involved in any pending litigation or legal proceeding.

ITEM 1A. RISK FACTORS

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

ITEM 2. UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS

None.

ITEM 3. DEFAULTS UPON SENIOR SECURITIES

None.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

ITEM 5. OTHER INFORMATION

None.

ITEM 6. EXHIBITS

The following documents are filed as a part of this report or are incorporated by reference to previous filings, if so indicated:

*filed herewith

(1) Incorporated by reference to the Form SB-2 registration statement filed on January 16, 2007.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.