Aeva Technologies, Inc. - Annual Report: 2021 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2021

OR

Commission File Number 001-39204

AEVA TECHNOLOGIES, INC.

(Exact name of Registrant as specified in its Charter)

Registrant’s telephone number, including area code: (650) 481-7070

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the Registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the Registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the Registrant, based on the closing price of the shares of common stock on The New York Exchange Stock Market on June 30, 2021, was $888 million.

The number of shares of Registrant’s Common Stock outstanding as of February 21, 2022, was 215,994,036.

DOCUMENTS INCORPORATED BY REFERENCE

Table of Contents

i

PART I

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This report contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”) regarding future events and our future results that are subject to the safe harbors created under the Securities Act and the Exchange Act. All statements contained in this report other than statements of historical fact, including statements regarding our future results of operations and financial position, the expected impact of the COVID-19 pandemic on our operations, our business strategy and plans, and our objectives for future operations, are forward-looking statements. The words “believe,” “may,” “will,” “estimate,” “continue,” “anticipate,” “goal,” “plan,” “intend,” “expect,” “seek”, and similar expressions are intended to identify forward-looking statements. We have based these forward-looking statements largely on our current expectations and projections about future events and trends. These forward-looking statements are subject to a number of risks, uncertainties and assumptions, including those described under “Part I, Item 1A. Risk Factors,” and elsewhere in this report. Moreover, we operate in a very competitive and rapidly changing environment. New risks emerge from time to time. It is not possible for our management to predict all risks, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements we may make. In light of these risks, uncertainties and assumptions, the future events and trends discussed in this report may not occur and actual results could differ materially and adversely from those anticipated or implied in the forward-looking statements.

You should not rely upon forward-looking statements as predictions of future events. The events and circumstances reflected in the forward-looking statements may not be achieved or occur. Although we believe that the expectations reflected in the forward-looking statements are reasonable, we cannot guarantee future results, levels of activity, performance, or achievements. We are under no duty to update any of these forward-looking statements after the date of this report or to conform these statements to actual results or revised expectations.

As used in this report, the terms “Aeva,” “we,” “us,” “our,” and “the Company” mean Aeva Technologies, Inc. and its subsidiaries unless the context indicates otherwise.

Item 1. Business.

Overview

Our goal is to bring perception to all devices. Through our Frequency Modulated Continuous Wave (“FMCW”) sensing technology, we believe we are introducing the world’s first 4D LiDAR-on-chip that, along with our proprietary software applications, enables the adoption of LiDAR across broad applications. We believe that our solutions will allow for the wide-scale adoption of autonomous driving. Furthermore, we believe that our proprietary 4D LiDAR technology has the potential to enable new categories for perception across consumer electronics, consumer health, industrial automation and security applications.

Founded in 2017 by former Apple engineers Soroush Salehian and Mina Rezk and led by a multidisciplinary team of engineers and operators experienced in the field of sensing and perception, Aeva’s mission is to bring the next wave of perception technology to broad applications from automated driving to consumer electronics, consumer health, industrial automation and security. Our 4D LiDAR-on-chip combines silicon photonics technology that is proven in the telecom industry with precise instant velocity measurements and long-range performance for commercialization.

On March 12, 2021 (the “Closing Date”), Aeva, Inc. consummated a business combination (the “Business Combination”) with InterPrivate Acquisition Corp. (the Company’s predecessor, which was originally incorporated in Delaware as a special purpose acquisition company (“IPV”)) pursuant to the Business Combination Agreement dated as of November 2, 2020 (the “BCA”), by and among IPV, WLLY Merger Sub Corp., a wholly owned subsidiary of IPV, and Aeva, Inc. Immediately upon the consummation of the Business Combination, WLLY Merger Sub Corp. merged with and into Aeva, Inc., with Aeva, Inc. surviving the merger as a wholly owned subsidiary of IPV. IPV changed its name to Aeva Technologies, Inc. and the pre-combination Aeva retained its name of Aeva, Inc.

2

As a development stage company, we work closely with our customers on the development and commercialization of their programs and the utilization of our products in such programs. Thus far, our customers have purchased prototype products and engineering services from us for use in their research and development programs. We are expanding our manufacturing capacity through third-party manufacturers to meet our customers’ anticipated demand for the production of our products.

Unlike legacy 3D LiDAR, which relies on Time-to-Flight (“ToF”) technology and measures only depth and reflectivity, Aeva’s solution leverages a proprietary FMCW technology to measure velocity in addition to depth, reflectivity and inertial motion. We believe the ability of Aeva’s solution to measure instant velocity for every pixel is a major advantage over ToF-based sensing solutions. Furthermore, Aeva’s technology is free from interference from other LiDAR beams and sunlight, and our core innovations within FMCW are intended to enable autonomous vehicles to see at significantly higher distances up to 500 meters.

We believe the advantages of our 4D LiDAR-on-chip allows us to provide the first LiDAR solution that is fully integrated onto a chip with superior performance at scale, with the potential to allow for the wide-scale adoption of autonomous driving and drive new categories of perception across industrial automation, consumer electronics, consumer health, aerospace, and security markets.

Technology Overview

With the world’s first LiDAR that is integrated onto a silicon photonics chip module, Aeva’s proprietary FMCW technology combines instant velocity measurement for each pixel, superior long-range performance, immunity from any LiDAR or sunlight interference, at low optical power. We believe that the advantages of our innovative sensing technology allows us to address the next generation of autonomous driving applications.

Beyond automotive applications, Aeva’s 4D LiDAR architecture enables superior resolution and precise velocity sensing, which we believe positions Aeva to potentially drive new perception categories for industrial automation, consumer electronics, consumer health, and security applications.

Aeva’s 4D LiDAR Technology

Our 4D LiDAR technology is based on an approach that is fundamentally different from 3D ToF technology and traditional FMCW LiDAR technologies. Our technology differentiation is rooted in Aeva’s:

Aeva’s Proprietary FMCW Design

Unlike legacy 3D LiDAR, which relies on ToF technology to transmit high power pulses of light to measure an object’s range, Aeva’s 4D LiDAR uses a continuous, low power laser beam to measure the change in frequency of the waveform as it reflects off an object. This allows our 4D LiDAR to detect the instant velocity of every point with centimeters per second precision and measure range at distances up to 500 meters.

Aeva’s 4D LiDAR is also free of interference from other LiDAR beams and sunlight and operates at fractions of the optical power that is typically required to achieve long range performance in 3D ToF systems.

3

We believe that Aeva’s proprietary 4D LiDAR technology approach addresses some of the critical hurdles that have previously slowed the broad adoption of automotive LiDAR that is based on legacy 3D ToF technology:

Aeva’s technology also differs from other FMCW LiDAR technologies across multiple areas:

Integrated Silicon Photonics Technology

Built on existing silicon CMOS and III-V technologies and semiconductor manufacturing processes, our solution measures depth, reflectivity and velocity for every pixel.

We believe that our technologies in the field of integrated photonics have the potential to enable 4D LiDAR-on-chip for broad applications:

4

Custom Digital Signal Processing ASIC

Aeva’s complex digital signal processing (“DSP”) algorithms have been designed and developed to process the returned optical signal to enable our 4D LiDAR to achieve superior performance across all detectable targets. The result of these DSP algorithms is a high fidelity point cloud of 4D data (3D position as {x,y,z} plus instantaneous velocity) for every pixel.

The custom design of DSP algorithms for Aeva’s ASIC is the result of extensive development and validation of real-world road data, spanning a variety of road types, geographic and environmental conditions over multiple years. Aeva’s proprietary DSP algorithms have been designed to provide the following benefits:

We believe our custom digital signal processing has the potential to enable a high-performance, low-power ASIC solution that can operate across a variety of environmental conditions while meeting the stringent automotive grade safety and security requirements for production.

4D Perception Software

When combined with Aeva’s powerful perception software, our product allows for fast object detection and classification as well as precision tracking that is essential for a highly automated driving system. In addition, our vehicle state estimation software produces high quality vehicle dynamics and positioning information without the added inertial motion sensing hardware and software typically used in today’s vehicles.

Object Detection

With Aeva’s instantaneous velocity measurement per pixel, the complex task of finding moving objects such as vehicles, pedestrians and bicycles is not only made simple and precise but also fast. Whereas legacy 3D LiDAR systems require accumulating measurements over several samples to determine if an object is moving, Aeva’s instantaneous velocity measurement per pixel allows the task of detecting moving objects to be executed on a single sample, reducing the reaction time and improving the overall safety of the system.

Object Classification and Tracking

We believe our products can enhance our detection capabilities to track and classify dynamic detected objects using 4D LiDAR’s instant velocity data.

5

Vehicle State Estimation

Through the instantaneous measurement of velocity, Aeva’s 4D LiDAR can produce high quality estimates of vehicle positioning and dynamic properties such as velocity, acceleration, and rate of turn. Whereas high quality vehicle state estimation can be obtained today with expensive hardware solutions such as fiber optic based gyroscopes and high precision inertial motion sensors, Aeva’s 4D LiDAR as an edge device can provide high quality and precise estimates without the use of any additional hardware, thereby further reducing the requirements and costs of such additional hardware. These high quality estimates can be used to produce high fidelity 3D maps of the environment and inform the vehicle computer about the current dynamics state of the vehicle.

Ground Segmentation and Lane Detection

With Aeva’s precise static pixel measurement, the task of estimating where the ground lies in front of the vehicle to determine drivable regions is straightforward. This information can be used by the vehicle to determine drivable regions and lane markings on the road.

Aeva 4D LiDAR vs. Other Sensing Technologies

Machine perception has evolved from using basic vision sensors to multiple sensing solutions each complementing the other’s capability to provide new capability and safe function. Today’s machines utilize the following sensing inputs for perception function: color, velocity, depth, reflectivity and inertial motion. While each current sensing technology has varying capabilities to measure some of these input requirements, we believe that Aeva’s 4D LiDAR technology combine key advantages across all requirements. Below is a comparison of Aeva’s 4D LiDAR technology and other existing solutions today.

While we believe Aeva’s 4D LiDAR technology meets the requirements of perception function for automated driving and beyond, other sensing technologies have certain advantages.

For example, other sensing technologies, such as cameras and Radar, represent well-established and well-understood technologies. Cameras can measure higher resolution color information compared to LiDAR technology, which is advantageous in certain circumstances, for example, when reading traffic lights. Radars operate in the radio frequencies and thus can better measure through severe weather conditions where an optical sensor such as camera or LiDAR have visibility limitations. Additionally, Radar and camera technologies, as well as certain legacy LiDARs, have been deployed in certain production vehicles, while Aeva’s products are not yet mass produced.

Camera

Cameras can measure color at high resolution and can also be used to infer depth. However, cameras inherently cannot measure depth, velocity, reflectivity, or inertial motion, which are all essential for the function of assisted driving systems (“ADAS”) and autonomous driving applications. Monocular cameras, or commonly known as 2D cameras, are the primary sensing component in today’s ADAS systems. Distance calculations in these camera systems are approximations based on software algorithms but are not based on actual direct measurements of depth. The primary use of cameras for automotive applications today is in lane keep assist, automatic high beam control, and traffic sign recognition as well as use in adaptive cruise control and automatic emergency braking when combined with other technologies. Binocular cameras, commonly known as 3D cameras, use two cameras to provide the same functionality of 2D cameras but leverage software algorithms to infer depth estimation at short distances.

Despite camera performance limitations, which include poor visual performance across different environmental conditions and lack of velocity detection and accurate measurement of distance, cameras are low in cost and thus their use in current production vehicles is common. However, a number of Original Equipment Manufacturers (“OEMs”) and Tier-1 suppliers have developed camera systems with additional components to overcome inherent camera technology shortfalls that come at the expense of increased cost and complexity.

6

Radar

Radar is a sensing system that uses radio waves to determine various properties of objects. Radar applications were first introduced to passenger vehicles for consumer use over 20 years ago and radar is considered a mature technology. There are three typical major classes of automotive radar systems today: short-range radar, medium-range radar, and long-range radar. Short-range radar is used for collision proximity warning and safety and enables limited parking assist features. Medium-range radar watches the corners of the vehicle, performs blind spot detection, and observes other-vehicle lane cross over and helps avoid side/corner collisions. Long-range radar is a forward-looking sensor used for adaptive cruise control and early collision detection at far ranges.

Radar systems measure velocity and depth albeit at much lower resolution and precision across a variety of environmental and lighting conditions. Radar does not meet other reflectivity, color and inertial motion perception requirements.

Legacy 3D Time-of-Flight LiDAR

Legacy LiDAR is based on ToF technology and can measure depth and reflectivity. ToF LiDAR measures the distance between a sensor and an object based on the time difference between the emission of a laser pulse signal and its return to the sensor when reflected from the object. In ideal conditions, ToF LiDAR can accurately measure distances in a complete scene with a single laser pulse.

However, because ToF systems measure power directly at the detector, they typically suffer from multiple limitations:

Almost all LiDAR systems in the market today are based on legacy ToF technology and face similar limitations highlighted above.

Our solutions and products

We provide perception solutions that enable our customers to see the world around them more clearly and in new ways. We believe that our products, based on Aeva’s proprietary 4D LiDAR technology have the potential to enable a diverse set of perception applications.

We have two primary product offerings for different market applications:

Our solutions are generally expected to be incorporated into final products such as automobiles, industrial equipment and consumer devices. We expect that, after a rigorous, multi-year product design and engineering validation process, customers would select our solutions to be designed into specific final product models, and our solutions would be sold at agreed rates per unit for the lifetime of the customer’s product programs.

7

Within the automotive sector, we expect our 4D LiDAR solution to be integrated into the vehicle as part of the vehicle integration and production processes to provide perception sensing capability as part of the vehicle’s overall autonomous driving stack. We expect our 4D LiDAR solutions to be compatible for integration into passenger vehicles, trucks and new mobility vehicle platforms, and we are engaged with customers in each of these categories for the potential integration of our solutions into such vehicle platforms.

Within industrial applications, we expect our 4D LiDAR solution would be incorporated as part of an industrial automation platform solution (such as industrial metrology products or cargo moving robots used for factory automation). Within security applications, we expect our 4D LiDAR solution would be incorporated as part of security monitoring systems that may use other sensing and computer electronics systems. We expect to leverage the synergies of our supply chain and manufacturing counterparties within automotive applications to sell our solutions directly to industrial automation companies that develop manufacturing automation solutions for other industrial companies and to manufacture and distribute our products using our existing manufacturing counterparties.

Product overview

4D LiDAR System

Our 4D LiDAR system is based on an innovative FMCW technology that is built from the ground up on our proprietary silicon photonics chip.

Aeries for Automotive

We believe that our Aeries product meets the stringent long range performance and velocity sensing needs of our automotive customers for their autonomous vehicle development programs. Aeries provides over 120º field of view for distance up to 500 meters and can measure the instant velocity of every pixel with centimeter per second precision. Aeries is also free from any LiDAR or sunlight-based interference.

The production version of Aeries will be designed for automotive grade mass volume production across passenger car, trucking and mobility applications and will be developed in collaboration with our automotive and manufacturing counterparties.

Market Outlook

We believe that our innovative products can improve safety, reduce development effort of perception software and reduce costs of autonomous driving systems. In addition, we believe that our solutions solve perception problems across a broad set of market applications, including the automotive, consumer electronics, consumer health, industrial automation and security markets.

Automotive

The automotive industry is undergoing a transformative change towards autonomy that is driven by fundamental shifts in consumer behavior as well as an industry response to environmental, social and governance (“ESG”) initiatives. Rising safety and security concerns, increasing demand for a more reliable transportation system, and transition from car ownership to “Mobility as a Service”, are expected to also increase the demand for advanced driver assistance systems and autonomous vehicles.

Advanced driver-assistance systems — Level 1 and Level 2

Passenger cars. Growth in population, urbanization, and rising disposable income have driven higher demand for passenger cars. The autonomous passenger car industry is expected to see steady growth as consumer behavior continues to evolve. Currently, Level 1 passenger vehicles still account for a majority of the global autonomous passenger vehicles market, but automotive OEMs are collaborating with technology providers to provide Level 2 ADAS systems for passenger cars.

8

Autonomous driving — Level 3, Level 4 and Level 5

Autonomous trucking. The autonomous trucking industry is expected to grow rapidly, with North America currently the largest market, and other geographies such as Europe and Asia still in the early stages of adoption. Growing demand from the logistics and construction sectors and growth from other industrial sectors have contributed to the expansion of the autonomous trucking industry. Additionally, more stringent government rules and safety considerations have also generated demand for automated driving technology in this sector. Many truck OEMs are partnering with AD technology manufacturing companies to produce autonomous truck systems. Suppliers of top truck OEMs have also collaborated with several technology companies to develop autonomous systems.

We believe the autonomous trucking industry has the potential to rely heavily on high performance long range LiDAR sensing solutions for the detection of objects at long distance in order to provide safe braking distance and otherwise achieve safe automated driving functionality on the highway. We believe Aeva 4D LiDAR’s long range and fast detection capability can position us to provide attractive solutions for this market.

Passenger cars. We expect the transition to Level 3, Level 4 and eventually Level 5 vehicles to be a significant factor for our growth. Autonomous passenger cars depend on several types of automotive sensors such as camera, radar, and LiDARs, along with comprehensive software technology solutions to provide automated driving function such as highway automation and urban self-driving functionality. We believe automotive OEMs and Tier 1s will continue to partner with the most advanced technology companies to implement the best sensing perception systems that enable safe automated driving function at production scale.

New mobility. Over the past several years, a number of emerging mobility and technology players have entered into the autonomous driving market with a vision to develop fully autonomous vehicles. This segment has experienced substantial investments in research and development in anticipation of the roll-out of driverless mobility services to consumers. Some players, such as Waymo, Uber, Nuro and Zoox, have focused their research and development efforts on developing Level 4 and Level 5 robo-taxis for the delivery of people and goods. Additionally, autonomous technology providers collaborate with automotive OEMs and Tier 1 component providers to develop autonomous vehicles.

Consumer devices

Consumer electronics

We believe Aeva’s 4D LiDAR-on-chip technology has the potential to be utilized in consumer devices such as phones, tablets and smart glasses for various perception applications, including 3D mapping and AR/VR. The application of new sensing input devices used in consumer electronics is expected to continue to grow as innovations help drive down costs and increase performance of consumer electronics devices. AR/VR technology has the potential to be a significant source of demand for the consumer electronics industry. Several major product manufacturers and consumer electronics technology companies have been increasingly public about development of AR/VR feature sets in their next generation consumer electronics products. We believe LiDAR is capable of enabling new use cases for these applications, and some of the largest technology companies have already implemented LiDAR sensing technologies in their phone and tablet devices. The consumer electronics devices market is highly competitive with a few major players dominating the market, including Samsung, Apple and Huawei.

Consumer health

We believe that Aeva’s 4D LiDAR has the potential to enable new applications within the consumer health market, including for contactless health monitoring. Specifically, we see potential future opportunities within consumer healthcare devices where the demand is growing for non-invasive, accurate and low-power sensors that can monitor relevant vital signs such as pulse rate and respiration rate. Longer-term, there may be additional opportunities for our 4D LiDAR to be used in broader consumer health applications such as heart health monitoring and other home-based digital healthcare equipment.

9

Industrial automation

As manually intensive tasks become more automated, we believe the opportunity for our sensing solutions in industrial workplaces has the potential to expand. Aeva’s 4D LiDAR technology has the potential to offer robots, industrial metrology machines and other automation equipment as a way to perceive their surroundings in a more clear, accurate and cost-effective manner.

The growth of automation poses numerous benefits for industrial applications, including increased efficiency, lower labor costs, and enabling workers to allocate their time to more productive tasks. We believe that some of the same benefits that our 4D LiDAR technology provides for automotive safety applications are beneficial for increasing safety and improving production efficiencies in industrial manufacturing and factory automation environments.

Competition

Given the emerging nature of the automated driving industry and other industries where LiDAR solutions are applicable, there are a number of companies developing LiDAR technologies for automotive, industrial and other applications, including companies developing ToF LiDAR solutions and LiDAR solutions that may be similar to ours. In addition, certain automotive players may have their own internal LiDAR development programs. We believe a significant portion of these other companies are developing legacy 3D LiDAR systems, all of which utilize some variant of ToF technology architectures which we believe have certain limitations in performance, or require high power or are high cost.

There may be new companies that are independently developing LiDAR solutions that may be similar to ours. However, we believe that our innovative product design, substantial real world collected road data, intellectual property portfolio together with a strong engineering and operations team provide us with certain advantages.

Contracts and Customers

Thus far, we have generally entered into strategic partnership agreements, development agreements and similar agreements with customers in the automated and autonomous driving industry. Pursuant to these agreements, we have sold or otherwise provided product prototypes and non-recurring engineering services for the purpose of research and development and testing of our customers’ development programs. Since our inception, these types of arrangements have accounted for most of our revenues. More recently, we have entered into production memorandums of understanding, development agreements and similar arrangements with certain of our customers that outline the potential development and commercialization of our products into such customers’ vehicle programs and the utilization of Aeva’s products in such vehicle programs targeted for series production. However, there can be no assurance that any of our customers’ development programs will ever be developed and commercialized, and even if they are, there can be no assurance that we will receive production purchase orders from our customers or that our products will be selected in any such series production vehicle programs.

Intellectual Property

Our success and competitive advantage depends in part upon our ability to develop and protect our core technology and intellectual property. We own a growing portfolio of intellectual property, confidential technical information, and expertise in the development of LiDAR technology, coherent sensing, integrated silicon photonics, algorithms and software.

We have filed patent and trademark applications in order to further secure these rights and strengthen our ability to defend against third parties who may infringe on our rights. The applications cover a broad range of system level and component level aspects of LiDAR technology.

10

As of December 31, 2021, we have approximately 198 pending patent applications worldwide. In addition, we have approximately 4 registered U.S. trademarks and 15 pending U.S. trademark applications. Our patent applications cover a broad range of system level hardware and component level aspects of our key technologies including, among other things, FMCW LiDAR system, integrated photonics, laser solutions and perception software technology.

We also rely on trade secrets, experiences, design and manufacturing know-how, continuing technological innovations, and licensing and exclusivity opportunities to maintain and improve our competitive position. Additionally, we protect our proprietary rights through agreements with our commercial partners, supply-chain vendors, employees and consultants, as well as close monitoring of the developments and products in the industry.

Manufacturing Process

Since inception, we have entered into arrangements with third-party manufacturers to develop and manufacture our products for our customers’ development programs. We intend to continue to rely on third-party manufacturers, to commercialize our products for automotive grade production.

We have entered into development agreements, memorandums of understanding and similar agreements with third-party manufacturers that typically include collaborations to develop, assemble, test and distribute our automotive grade 4D LiDAR system to OEMs and automotive customers for their autonomous driving vehicle programs. We intend to utilize our production counterparties’ capabilities for the final assembly and test of our products and to produce our products at global manufacturing plants to provide our 4D LiDAR system, including our 4D LiDAR-on-chip, to our customers.

Research and Development

The markets in which Aeva competes are new and rapidly evolving across hardware and software applications. We invest significant resources into ongoing research and development programs because we believe our ability to grow our market position depends, in part, on innovative technologies that offer a unique value proposition for our customers and differentiation from our competitors.

Our research and development activities occur primarily in the San Francisco Bay Area. Our research and development team is responsible for developing our 4D LiDAR technology, creating new technologies and expanding our LiDAR and perception software solutions’ functionality. The team also designs our 4D LiDAR products, ensures it is designed for manufacturability and conducts required validation and verification activities. The research and development team also partners with our operations and supply chain teams with the goal of developing scalable commercial and reliable manufacturing processes and direct production material procurement and distribution. Our team consists of engineers, technicians, scientists, operators and professionals with experience from a wide variety of the world’s leading sensing, engineering, consumer electronics and automotive organizations.

Sales and Marketing

We take an insight-driven, account-based marketing approach to build and expand our relationships with customers and commercial counterparties. We collect feedback directly from our commercial counterparties to garner insights that help drive our business and products forward.

Government Regulation

At both the federal and state level, the United States has provided a positive legal environment to permit safe testing and development of autonomous functionality. We do not currently anticipate any near-term federal standards that would materially impede the deployment of our products or technology. Some states, however, particularly California and New York, still enforce certain operational or registration requirements for certain autonomous functions. We believe such hurdles will be removed as state regulators gain better experience with the technology. U.S. federal regulations, however, remain largely permissive of deployments of higher levels of safe and responsible autonomous functionality.

11

Foreign markets such as the EU and China also continue to develop their respective standards to define deployment requirements for higher levels of autonomy in these regions. As the cars that carry our sensors go into production, we will be subject to existing stringent requirements under the National Traffic and Motor Vehicle Safety Act of 1966, or the Vehicle Safety Act, including a duty to report, subject to strict timing requirements, safety defects with our products. The Vehicle Safety Act imposes potentially significant civil penalties for violations including the failure to comply with such reporting requirements. We are also subject to the existing U.S. Transportation Recall Enhancement, Accountability and Documentation Act, or TREAD, which requires equipment manufacturers, such as us, to comply with “Early Warning” requirements by reporting certain information to the NHTSA, such as information related to defects or reports of injury related to our products. TREAD imposes criminal liability for violating such requirements if a defect subsequently causes death or bodily injury. In addition, the National Traffic and Motor Vehicle Safety Act authorizes NHTSA to require a manufacturer to recall and repair vehicles that contain safety defects or fail to comply with U.S. federal motor vehicle safety standards. Sales into foreign countries may be subject to similar regulations. As the development of federal and state regulation of autonomous machines and vehicles continues to evolve, we may be subject to additional regulatory schemes.

As a LiDAR technology company, we are subject to the Electronic Product Radiation Control Provisions of the Federal Food, Drug, and Cosmetic Act and related FDA regulations. These requirements are enforced by the FDA. Electronic product radiation includes laser technology. Regulations governing these products are intended to protect individuals from hazardous or unnecessary exposure. Manufacturers are required to certify in product labeling and reports to the FDA that their products comply with applicable performance standards as well as maintain manufacturing, testing, and distribution records for their products.

Similarly, we are also subject to trade, customs product classification and sourcing regulations. We are subject to the requirements under the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 that will require us to diligence, disclose and report whether our products contain conflict minerals. The implementation of these requirements could adversely affect the sourcing, availability and pricing of the materials used in the manufacture of components used in our products.

Finally, our operations are subject to various federal, state and local laws and regulations governing the occupational health and safety of our employees and wage regulations. We are subject to the requirements of the federal Occupational Safety and Health Act, as amended, and comparable state laws that protect and regulate employee health and safety.

Like all companies operating in similar industries, we are subject to environmental regulation, including water use; air emissions; use of recycled materials; energy sources; the storage, handling, treatment, transportation and disposal of hazardous materials; and the remediation of environmental contamination. Compliance with these rules may include permits, licenses and inspections of our facilities and products.

Human Capital

Our employees are critical to our success. As of December 31, 2021, we had 227 full-time employees based primarily in the San Francisco Bay Area. We also engage numerous consultants and contractors to supplement our permanent workforce. A majority of our employees are engaged in research and development and related functions. To date, we have not experienced any work stoppages and consider our relationship with our employees to be in good standing. None of our employees are subject to a collective bargaining agreement or represented by a labor union.

We recognize that attracting, hiring, motivating, and retaining diverse talent at all levels is vital to continuing our success. We believe that compensation should not only be competitive; it should be equitable and should enable employees to share in the Company’s success as stockholders of the Company. By continuing to foster an engaging work environment and focus on continued improvements to employee retention, we improve our ability to support and protect Aeva's long-term interests. The Company recognizes its people are most likely to thrive when they have the resources to meet their needs and the time and support to succeed in their professional and personal lives.

12

The Company is committed to protecting its employees everywhere it operates. The Company has taken additional measures during the COVID-19 pandemic, including providing information resources, COVID testing, and face masks.

Facilities

Our corporate headquarters is located in the San Francisco Bay Area, where we lease two buildings with approximately 28,000 and 30,000 of square feet, respectively, pursuant to a lease that expires in June 2023 and July 2025, respectively. Our headquarters contains engineering, research and development, assembly and administrative functions. Additionally, we lease approximately 96,000 square feet located in the San Francisco Bay Area for our testing facility. This lease expires in April 2026. We believe that our facilities are adequate for our current needs and, should we need additional space, we believe we will be able to obtain additional space on commercially reasonable terms.

Legal Proceedings

From time to time, the Company may be involved in actions, claims, suits and other proceedings in the ordinary course of business, including assertions by third parties relating to intellectual property infringement, breaches of contract or warranties or employment-related matters. When it is both probable that a liability has been incurred and the amount of the loss can be reasonably estimated, the Company records a liability for such loss contingencies. The Company’s estimates regarding potential losses and materiality are based on the Company’s judgment and assessment of the claims utilizing currently available information. Although the Company will continue to reassess its reserves and estimates based on future developments, the Company’s objective assessment of the legal merits of any such claims may not always be predictive of the outcome and actual results may vary from the Company’s current estimates.

Corporate Information

Our principal offices are located at 555 Ellis Street, Mountain View, CA 94043, and our telephone number is (650) 481-7070. Our website address is www.aeva. The information contained on, or that can be accessed through, our website is not part of this report. Aeva is our registered trademark in the United States and in various international jurisdictions. Aeva, the Aeva logo and all of our product names appearing in this report are our trademarks. Other trademarks appearing in this report are the property of their respective holders.

Available Information

We make our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to those reports, available free of charge at our website as soon as reasonably practicable after they have been filed with the SEC. Our website address is https://www.aeva.com. Information on our website is not part of this report. The SEC maintains a website that contains the materials we file with the SEC at www.sec.gov

13

Item 1A. Risk Factors.

RISK FACTORS

Our operating and financial results are subject to various risks and uncertainties, you should carefully consider the following risk factors, which could materially affect our business, financial condition or results of operations in future periods. These risks are not the only risks facing the Company. Additional risks and uncertainties not currently known to us or that we currently deem to be immaterial also may materially adversely affect our business, financial condition or results of operations in future periods.

Summary Risk Factors

Our business is subject to numerous material and other risks that you should be aware of before making an investment decision. These risks are described more fully in the section entitled “Risk Factors.” These risks include, among others:

14

Risks Related to Aeva’s Business and Industry

Aeva is an early stage company, with a history of losses, and has only sold or otherwise provided prototypes and non-recurring engineering services to customers for the purpose of R&D and testing of such customers’ development programs. If such programs are not fully developed and commercialized, or if such programs experience significant delays, Aeva’s business, financial condition and results of operations will be materially adversely affected and Aeva may never achieve or sustain profitability.

Aeva has incurred net losses on an annual basis since its inception. Aeva incurred a net loss of $101.9 million for the year ended December 31, 2021 and net loss of $25.6 million for the year ended December 31, 2020, respectively. Aeva has only sold or otherwise provided prototypes and non-recurring engineering services and believes that it will continue to incur operating and net losses each quarter until at least the time it begins commercial deliveries of its products, which are not expected to begin until 2024 and may occur later or not at all. Even if Aeva is able to successfully develop and sell its products, there can be no assurance that they will be commercially successful. Aeva’s potential profitability is dependent upon the successful development and successful commercial introduction and acceptance of its products, which may not occur. Because Aeva will incur the costs and expenses of developing and commercializing its products before it receives any significant revenues with respect thereto, Aeva’s losses in future periods may be significant. Aeva may never achieve or sustain profitability.

Aeva expects the rate at which it will incur losses to be significantly higher in future periods as Aeva:

Aeva has only sold or otherwise provided prototypes and non-recurring engineering services to customers for the purpose of R&D and testing such customers’ development programs. If such programs are not fully developed and commercialized, or if such programs experience delays, cancellations or reductions, Aeva’s business, financial condition and results of operations will be materially adversely affected.

Aeva’s success in developing and commercializing its products depends in large part on its customers’ success in developing and commercializing their own products that utilize Aeva’s products and services. There can be no guarantee that Aeva’s customers will be able to fully develop and commercialize products that utilize Aeva’s

15

products or that such customers will continue to utilize Aeva’s products. Such customers’ development programs may not ever be developed and commercialized or such programs may be delayed. If such customers’ development programs are not fully developed and commercialized, experience delays or otherwise do not incorporate Aeva’s products, Aeva’s business, financial condition and results of operations will be materially adversely affected.

Our estimate of total addressable market is subject to numerous uncertainties. If we have overestimated the size of our total addressable market now or in the future, our future growth rate may be limited.

The Company’s estimates of total addressable market are based on a variety of inputs, including production estimates per product group (which are largely based on global light vehicle production (“LVP”) data and estimates from IHS Markit), content per vehicle (“CPV”) estimates, the Company’s own market insights, estimates as to the pace and extent of standard-setting and regulatory change, internal market intelligence on prices and penetration/adoption rates of each expected product group and the Company’s history operating in the market (including, among other things, its order and bid experience).

We have not independently verified any third-party information, including LVP estimates by IHS Markit, and cannot assure you of its accuracy or completeness. While we believe our market size estimates are reasonable, such information is inherently imprecise. If IHS Markit or other third-party or internally-generated data used in our estimates proves to be inaccurate or we make errors in our assumptions based on such data, our actual market may be more limited than our estimates. In addition, these inaccuracies or errors may cause us to misallocate capital and other critical business resources, which could harm our business. Even if our total addressable market meets our size estimates and experiences growth, we may not continue to grow our share of the market. Our growth is subject to many factors, including the successful implementation of our business strategy, which is subject to many risks and uncertainties. Accordingly, the estimates of our TAM included in this Annual Report should not be taken as indicative of our ability to grow

If Aeva and its collaborators are unable to successfully develop and commercialize Aeva’s products or services, or experience significant delays in doing so, Aeva’s business, financial condition and results of operations will be materially adversely affected.

Aeva’s growth depends on successfully developing and commercializing its products and services. Aeva currently provides prototypes and non-recurring engineering services to customers for purposes of R&D and has not yet commercialized its products or services. Aeva may not be able to develop and commercialize its products or may be delayed in doing so. In addition, the successful commercialization of Aeva’s products depends in part on Aeva’s collaborators successfully developing and commercializing their own development programs, and such programs may not ultimately be developed or commercialized.

Aeva’s limited operating history makes it difficult to evaluate its future prospects and the risks and challenges it may encounter.

Aeva began operations in 2017 and has not yet fully developed and commercialized any of its products. This relatively limited operating history makes it difficult to evaluate Aeva’s future prospects and the risks and challenges it may encounter. Risks and challenges Aeva has faced or expects to face include its ability to:

16

If Aeva fails to address the risks and difficulties that it faces, including those associated with the challenges listed above as well as those described elsewhere in this “Risk Factors” section, its business, financial condition and results of operations could be adversely affected. Further, because Aeva has limited historical financial data and operates in a rapidly evolving market, any predictions about its future revenue and expenses may not be as accurate as they would be if it had a longer operating history or operated in a more predictable market. Aeva has encountered in the past, and will encounter in the future, risks and uncertainties frequently experienced by growing companies with limited operating histories in rapidly changing industries. If Aeva’s assumptions regarding these risks and uncertainties, which it uses to plan and operate its business, are incorrect or change, or if it does not address these risks successfully, its results of operations could differ materially from its expectations and its business, financial condition and results of operations could be adversely affected.

Aeva’s forecasts are based upon assumptions, analyses and internal estimates developed by Aeva’s management. If these assumptions, analyses or estimates prove to be incorrect or inaccurate, Aeva’s actual operating results may differ materially from those forecasted.

Aeva’s forecasts are subject to significant uncertainty and are based on assumptions, analyses and internal estimates developed by Aeva’s management, any or all of which may not prove to be correct or accurate. If these assumptions, analyses or estimates prove to be incorrect or inaccurate, Aeva’s actual operating results may differ `materially from those forecasted.

The forecasts include forecasts and estimates relating to the expected size and growth of the markets for which Aeva operates or seeks to enter. Such markets may not develop or grow, or may develop and grow at a lower rate than expected, and even if these markets experience the forecasted growth described herein, Aeva may not grow its business at similar rates, or at all. Aeva’s future growth is subject to many factors, including, among others, its ability to develop and commercialize its products and the market’s adoption of its products, both of which are subject to risks and uncertainties, many of which are beyond Aeva’s control. Accordingly, the forecasts and estimates of market size and growth described herein should not be taken as indicative of Aeva’s future growth. In addition, these forecasts may not take into account the impact of the current global COVID-19 pandemic, and Aeva cannot assure you that these forecasts will not be materially and adversely affected as a result of the COVID-19 pandemic.

Aeva continues to implement strategic initiatives designed to grow its business. These initiatives may prove more costly than Aeva currently anticipates and Aeva may not succeed in increasing its revenue in an amount sufficient to offset the costs of these initiatives and to achieve and maintain profitability. Aeva’s ability to effectively manage its anticipated growth and expansion of its operations will also require Aeva to enhance its operational, financial and management controls and infrastructure, human resources policies and reporting systems. These enhancements and improvements will require significant capital expenditures and allocation of valuable management and employee resources.

Aeva continues to make investments and implement initiatives designed to grow its business, including:

17

These initiatives may prove more expensive than Aeva currently anticipates, and Aeva may not succeed in increasing its revenue, if at all, in an amount sufficient to offset these higher expenses and to achieve and maintain profitability. The market opportunities Aeva is pursuing are at an early stage of development, and it may be many years before the end markets Aeva expects to serve generate demand for its products at scale, if at all. Aeva’s revenue may be adversely affected for a number of reasons, including the development and/or market acceptance of new technology that competes with its products, failure of Aeva’s customers to develop and commercialize the programs that include Aeva’s products or technology, Aeva’s inability to effectively manage its inventory or manufacture products at scale, Aeva’s inability to enter new markets or help its customers adapt its products for new applications or Aeva’s failure to attract new customers or expand orders from existing customers or increasing competition. Furthermore, it is difficult to predict the size and growth rate of Aeva’s target markets, customer demand for its products, commercialization timelines, developments in autonomous sensing and related technology, the entry of competitive products, or the success of existing competitive products and services. For these reasons, Aeva does not expect to achieve profitability over the near term. If Aeva’s revenue does not grow over the long term, its ability to achieve and maintain profitability will be adversely affected, and the value of its business may significantly decrease.

Aeva’s ability to effectively manage its anticipated growth and expansion of operations will also require it to enhance its operational, financial and management controls and infrastructure, human resources policies and reporting systems. These enhancements and improvements will require significant capital expenditures, investments in additional headcount and other operating expenditures and allocation of valuable management and employee resources. Aeva’s future financial performance and ability to execute on its business plan will depend, in part, on its ability to effectively manage any future growth and expansion. There are no guarantees Aeva will be able to do so in an efficient or timely manner, or at all.

If Aeva’s products are not selected for inclusion in development programs, including development programs for ADAS or autonomous driving systems (“AD”), or are not adopted by automotive OEMs, automotive tier 1 companies, mobility or technology companies or their respective suppliers, Aeva’s business will be materially and adversely affected.

Aeva is currently developing products for use in its customers’ development programs, which are in varying stages of development. In many cases, Aeva’s customers and their suppliers are designing and developing these programs and the related technology over several years. Many of these programs, including development programs for ADAS, automotive OEMs, automotive tier 1 companies, mobility or technology companies or their respective suppliers, require extensive testing or qualification processes prior to the customer placing orders for large quantities of products such as Aeva’s products, because such products will function as part of a larger system or platform and must meet certain other specifications. Aeva spends significant time and resources to have its products selected for these programs, which is known as a “design win.” In the case of AD and ADAS technology, a design win may mean Aeva’s product has been selected for use in a particular vehicle model. If Aeva does not achieve a design win with respect to a particular vehicle model, it may not have an opportunity to supply its products to the automotive OEM for that vehicle model for a period of many years. In many cases, this period can be as long as five to seven or more years. If Aeva fails to win a significant number of vehicle models from one or more automotive OEMs or their suppliers, its business, results of operations and financial condition will be materially and adversely affected. If Aeva’s products are not selected for a particular program or if Aeva’s products are not successful in such program, it is unlikely that its product will be deployed in other programs of that customer.

If Aeva’s products are not selected for inclusion by consumer electronics or consumer health device manufacturers or suppliers to industrial and security applications, its business will be materially and adversely affected.

In addition to developing products to be used in the automotive industry, Aeva is targeting the deployment of its products in the consumer electronics, consumer health device and industrial and security industries. Aeva's

18

forecasts assume that Aeva will successfully commercialize its products in these industry segments, in addition to the automotive industry, and such successful market penetration represents a significant contribution to Aeva’s forecasted results. As a result, if Aeva’s products are not selected for inclusion by consumer electronics or consumer health device manufacturers or suppliers to industrial and security applications, Aeva’s business will be materially and adversely affected and Aeva’s actual results may differ materially from its forecasts.

Aeva relies on third-party suppliers. Because some of the raw materials and key components in its products come from limited or single source suppliers, Aeva is susceptible to supply shortages, long lead times for components, and supply changes, any of which could disrupt its supply chain and could delay deliveries of its products to customers, which could adversely affect Aeva’s business, results of operations and financial condition.

Some of the components that go into the manufacture of Aeva’s products are sourced from third-party suppliers. To date, Aeva has produced its products in relatively limited quantities for use in development programs. Although Aeva does not have any experience in managing its supply chain to manufacture and deliver its products at scale, its future success will depend on its ability to manage its supply chain to manufacture and deliver its products at scale. Some of the key components used to manufacture Aeva’s products come from limited or single-source suppliers. Aeva is therefore subject to the risk of shortages and long lead times in the supply of these components and the risk that its suppliers discontinue or modify components used in its products. Aeva has a global supply chain and the COVID-19 pandemic and other health epidemics and outbreaks may adversely affect its ability to source components in a timely or cost-effective manner from its third-party suppliers due to, among other things, work stoppages or interruptions. For example, Aeva’s products depend on external semiconductor foundries. Any disruptions to those foundries could materially adversely affect Aeva’s ability to manufacture its products. In addition, the lead times associated with certain components are lengthy and preclude rapid changes in quantities and delivery schedules. Aeva has in the past experienced and may in the future experience component shortages and price fluctuations of certain key components and materials, and the predictability of the availability and pricing of these components may be limited. Component shortages or pricing fluctuations could be material in the future. In the event of a component shortage, supply interruption or material pricing change from suppliers of these components, Aeva may not be able to develop alternate sources in a timely manner or at all in the case of sole or limited sources. Developing alternate sources of supply for these components may be time-consuming, difficult, and costly and Aeva may not be able to source these components on terms that are acceptable to it, or at all, which may undermine Aeva’s ability to meet its requirements or to fill customer orders in a timely manner. Any interruption or delay in the supply of any of these parts or components, or the inability to obtain these parts or components from alternate sources at acceptable prices and within a reasonable amount of time, would adversely affect Aeva’s ability to meet its scheduled product deliveries to its customers. This could adversely affect Aeva’s relationships with its customers and channel partners and could cause delays in shipment of its products and adversely affect its operating results. In addition, increased component costs could result in lower gross margins. Even where Aeva is able to pass increased component costs along to its customers, there may be a lapse of time before it is able to do so such that Aeva must absorb the increased cost. If Aeva is unable to buy these components in quantities sufficient to meet its requirements on a timely basis, it will not be able to deliver products to its customers, which may result in such customers using competitive products instead of Aeva’s.

Continued pricing pressures, automotive OEM cost reduction initiatives and the ability of automotive OEMs to re-source or cancel vehicle or technology programs may result in lower than anticipated margins, or losses, which may adversely affect Aeva’s business.

Cost-cutting initiatives adopted by Aeva’s customers often result in increased downward pressure on pricing. Aeva expects that its agreements with automotive OEMs may require step-downs in pricing over the term of the agreement or, if commercialized, over the period of production. In addition, Aeva’s automotive OEM customers often reserve the right to terminate their supply contracts for convenience, which enhances their ability to obtain price reductions. Automotive OEMs also possess significant leverage over their suppliers, including Aeva, because the automotive component supply industry is highly competitive, serves a limited number of customers and has a high fixed cost base.

Accordingly, Aeva expects to be subject to substantial continuing pressure from automotive OEMs and Tier 1 suppliers to reduce the price of its products. It is possible that pricing pressures beyond Aeva’s expectations could intensify as automotive OEMs pursue restructuring, consolidation and cost-cutting initiatives. If Aeva is unable to

19

generate sufficient production cost savings in the future to offset price reductions, its gross margin and profitability would be adversely affected.

Aeva expects to incur substantial R&D costs and devote significant resources to identifying and commercializing new products, which could significantly reduce its profitability or increase its losses and may never result in revenue to Aeva.

Aeva’s future growth depends on developing its products, penetrating new markets, adapting existing products to new applications and customer requirements, and introducing new products that achieve market acceptance. Aeva plans to incur substantial, and potentially increasing, R&D costs as part of its efforts to design, develop, manufacture and commercialize new products, and enhance existing products and these costs are likely to grow in the future. Because Aeva accounts for R&D as an operating expense, these expenditures will adversely affect its results of operations in the future. Further, Aeva’s R&D program may not produce successful results, and its new products may not achieve market acceptance, create additional revenue or become profitable.

Market adoption of LiDAR, including Aeva’s 4D LiDAR technology, is uncertain. If market adoption of LiDAR, including Aeva’s 4D LiDAR technology, does not continue to develop, or develops more slowly than Aeva expects, its business will be adversely affected.

While Aeva’s 4D LiDAR technology can be applied to different use cases across end markets, a significant portion of its revenue is primarily generated from the development of automotive applications. Despite the fact that the automotive industry has engaged in considerable effort to research and test its LiDAR products, including Aeva’s 4D LiDAR technology, for ADAS and AD applications, the automotive industry may not introduce LiDAR products in commercially available vehicles. Aeva continually studies emerging and competing sensing technologies and methodologies and it may add new sensing technologies. However, LiDAR products remain relatively new and it is possible that other sensing modalities, or a new disruptive modality based on new or existing technology, including a combination of technology, will achieve acceptance or leadership in the ADAS and AD industries. Even if LiDAR products are used in initial generations of AD technology and certain ADAS products, Aeva cannot guarantee that LiDAR products will be designed into or included in subsequent generations of such commercialized technology. In addition, Aeva expects that initial generations of autonomous vehicles will be focused on limited applications, such as robo-taxis, and that mass market adoption of autonomous technology may lag behind these initial applications significantly. The speed of market growth for ADAS or autonomous vehicles is difficult if not impossible to predict, and it is more difficult to predict this market’s future growth in light of the economic consequences of the COVID-19 pandemic. In addition, Aeva expects competition among providers of sensing technology based on LiDAR and other modalities to increase substantially. If commercialization of LiDAR products is not successful, or not as successful as Aeva or the market expects, or if other sensing modalities gain acceptance by market participants, regulators, safety organizations or other market participants, Aeva’s business, results of operations and financial condition will be materially and adversely affected.

Aeva is investing in and pursuing market opportunities outside of the automotive markets, including in the technology, consumer electronics and consumer health device industries. Aeva believes that its future revenue growth, if any, will depend in part on its ability to expand within new markets such as these and to enter new markets as they emerge. Each of these markets presents distinct risks and, in many cases, requires Aeva to address the particular requirements of that market.

Addressing these requirements can be time-consuming and costly. The market for LiDAR technology outside of automotive applications is relatively new, rapidly developing and unproven in many markets or industries. Many of Aeva’s customers outside of the automotive industry are still in the testing and development phases and it cannot be certain that they will commercialize products or systems with Aeva’s 4D LiDAR technology or at all. Aeva cannot be certain that LiDAR will be sold into these markets, or any market outside of automotive market, at scale. Adoption of LiDAR products, including Aeva’s products, outside of the automotive industry will depend on numerous factors, including whether the technological capabilities of LiDAR and LiDAR-based products meet users’ current or anticipated needs, whether the benefits of designing LiDAR into larger sensing systems outweigh the costs, complexity and time needed to deploy such technology or replace or modify existing systems that may have used other modalities such as cameras and radar, whether users in other applications can move beyond the testing and development phases and proceed to commercializing systems supported by LiDAR technology and

20

whether LiDAR developers such as Aeva can keep pace with rapid technological change in certain developing markets and the global response to the COVID-19 pandemic and the length of any associated work stoppages. If LiDAR technology does not achieve commercial success outside of the automotive industry, or if the market develops at a pace slower than Aeva expects, its business, results of operation and financial condition will be materially and adversely affected.

Aeva may experience difficulties in managing its growth and expanding its operations.

Aeva expects to experience significant growth in the scope and nature of its operations. Aeva’s ability to manage its operations and future growth will require Aeva to continue to improve its operational, financial and management controls, compliance programs and reporting systems. Aeva is currently in the process of continuing to strengthen its compliance programs, including its compliance programs related to export controls, privacy and cybersecurity and anti-corruption. Aeva may not be able to implement improvements in an efficient or timely manner and may discover deficiencies in existing controls, programs, systems and procedures, which could have an adverse effect on its business, reputation and financial results.

Aeva has only sold or otherwise provided prototypes and non-recurring engineering services to customers for the purpose of R&D and testing of such customers’ development programs, and Aeva expects to continue to do so as it seeks to develop and commercialize its products. As a result, Aeva expects its results of operations to fluctuate on a quarterly and annual basis, which could cause the stock price of the Company to fluctuate or decline.

Aeva’s quarterly results of operations have fluctuated in the past and may vary significantly in the future. As such, historical comparisons of its operating results may not be relevant, meaningful or indicative of future results. In particular, because Aeva’s sales to date have primarily been of prototypes and non-recurring engineering services to customers for the purpose of R&D and testing of such customers’ development programs, sales in any given quarter can fluctuate based on the timing and success of its customers’ development projects. Accordingly, the results of anyone quarter should not be relied upon as an indication of future performance. Aeva’s quarterly financial results may fluctuate as a result of a variety of factors, many of which are outside of its control and may not fully reflect the underlying performance of Aeva’s business. These fluctuations could adversely affect Aeva’s ability to meet its expectations or those of securities analysts, ratings agencies or investors. If Aeva does not meet these expectations for any period, the value of its business and its securities could decline significantly. Factors that may cause these quarterly fluctuations to include, without limitation, those listed below:

21

Aeva’s transition to an outsourced manufacturing business model may not be successful, which could harm its ability to deliver products and recognize revenue.

Aeva is in the initial stages of transitioning from a manufacturing model in which it sources components from third-parties and assembles its final products at its San Francisco Bay Area location, to one where it relies exclusively on third-party manufacturers in foreign and domestic locations for both the manufacturing and assembly of its products. Aeva believes the use of third-party manufacturers in this manner will have benefits, but in the near term, while it begins working with new counterparties, Aeva may lose revenue, incur increased costs and potentially harm its customer relationships.

Reliance on third-party manufacturers reduces Aeva’s control over the production process, including reduced control over quality, product costs and product supply and timing. Aeva may experience delays in shipments or issues concerning product quality from its third-party manufacturers. If any of Aeva’s third-party manufacturers experience interruptions, delays or disruptions in supplying its products, including by natural disasters, the global COVID-19 pandemic, other health epidemics and outbreaks, or work stoppages or capacity constraints, Aeva’s ability to ship products to distributors and customers would be delayed. In addition, unfavorable economic conditions could result in financial distress among third-party manufacturers upon which Aeva relies, thereby increasing the risk of disruption of supplies necessary to fulfill Aeva’s production requirements and meet customer demands. Additionally, if any of Aeva’s third-party manufacturers experience quality control problems in their manufacturing operations and Aeva’s products do not meet customer or regulatory requirements, it could be required to cover the cost of repair or replacement of any defective products. These delays or product quality issues could have an immediate and material adverse effect on Aeva’s ability to fulfill orders and could have a negative effect on its operating results. In addition, such delays or issues with product quality could adversely affect Aeva’s reputation and its relationship with its channel partners. If third-party manufacturers experience financial, operational, manufacturing capacity or other difficulties, or experience shortages in required components, or if they are otherwise unable or unwilling to continue to manufacture Aeva’s products in required volumes or at all, Aeva’s supply may be disrupted, it may be required to seek alternate manufacturers and it may be required to re-design its products. It would be time-consuming, and could be costly and impracticable, to begin to use new manufacturers and designs, and such changes could cause significant interruptions in supply and could have an adverse effect on Aeva’s ability to meet its scheduled product deliveries and may subsequently lead to the loss of sales. While Aeva takes measures to protect its trade secrets, the use of third-party manufacturers may also risk disclosure of its innovative and proprietary manufacturing methodologies, which could adversely affect Aeva’s business.

Aeva’s outsourced manufacturing business model may not be successful. Aeva depends on manufacturing counterparties, assemble and test its products. If Aeva’s manufacturing counterparties are not able to perform their obligations at a sufficiently high standard or in a timely manner, Aeva’s ability to deliver products and recognize revenue may be harmed and its business could be adversely affected.

Aeva relies on third-party manufacturers. In the near term, while Aeva is beginning manufacturing with new counterparties, Aeva may lose revenue, incur increased costs and potentially harm its customer relationships.

22

Reliance on third-party manufacturers reduces Aeva’s control over the manufacturing process, including reduced control over quality, product costs and product supply and timing. Aeva may experience delays in shipments or issues concerning product quality from its third-party manufacturers. If any of Aeva’s third-party manufacturers experience interruptions, delays or disruptions in supplying its products, including by natural disasters, the global COVID-19 pandemic, other health epidemics and outbreaks, or work stoppages or capacity constraints, Aeva’s ability to ship products to distributors and customers would be delayed. In addition, unfavorable economic conditions could result in financial distress among third-party manufacturers upon which Aeva relies, thereby increasing the risk of disruption of supplies necessary to fulfill Aeva’s production requirements and meet customer demands. Additionally, if any of Aeva’s third-party manufacturers experience quality control problems in their manufacturing operations and Aeva’s products do not meet customer or regulatory requirements, it could be required to cover the cost of repair or replacement of any defective products. These delays or product quality issues could have an immediate and material adverse effect on Aeva’s ability to fulfill orders and could have a negative effect on its operating results. In addition, such delays or issues with product quality could adversely affect Aeva’s reputation and its relationship with its channel partners. If third-party manufacturers experience financial, operational, manufacturing capacity or other difficulties, or experience shortages in required components, or if they are otherwise unable or unwilling to continue to manufacture Aeva’s products in required volumes or at all, Aeva’s supply may be disrupted, it may be required to seek alternate manufacturers and it may be required to re-design its products. It would be time-consuming, and could be costly and impracticable, to begin to use new manufacturers and designs, and such changes could cause significant interruptions in supply and could have an adverse effect on Aeva’s ability to meet its scheduled product deliveries and may subsequently lead to the loss of sales. While Aeva takes measures to protect its trade secrets, the use of third-party manufacturers may also risk disclosure of its innovative and proprietary manufacturing methodologies, which could adversely affect Aeva’s business.

Aeva, its outsourcing partners and its suppliers may rely on complex machinery for Aeva’s production, which involves a significant degree of risk and uncertainty in terms of operational performance and costs. Aeva, its outsourcing partners and its suppliers may also rely on highly skilled labor for Aeva’s production, and if such highly skilled labor is unavailable, Aeva’s business could be adversely affected.

Aeva’s outsourcing partners and its suppliers may rely on complex machinery for the production, assembly and installation of Aeva’s products, which will involve a significant degree of uncertainty and risk in terms of operational performance and costs. The facilities of its outsourcing partners and suppliers consist of large-scale machinery combining many components. These components may suffer unexpected malfunctions from time to time and will depend on repairs and spare parts to resume operations, which may not be available when needed. Unexpected malfunctions of these components may significantly affect the intended operational efficiency. In addition, Aeva and its outsourcing partners and its suppliers also rely on highly skilled labor for Aeva’s assembly and production. If such highly skilled labor is unavailable, Aeva’s business could be adversely affected. Operational performance and costs can be difficult to predict and are often influenced by factors outside of Aeva’s control, such as, but not limited to, scarcity of natural resources, environmental hazards and remediation, costs associated with decommissioning of machines, labor disputes and strikes, difficulty or delays in obtaining governmental permits, damages or defects in electronic systems, industrial accidents, fire, seismic activity and natural disasters. Should operational risks materialize, it may result in the personal injury to or death of workers, the loss of production equipment, damage to production facilities, monetary losses, delays and unanticipated fluctuations in production, environmental damage, administrative fines, increased insurance costs and potential legal liabilities, all which could have a material adverse effect on Aeva’s business, prospects, financial condition or operating results.

As part of growing its business, Aeva may make acquisitions. If Aeva fails to successfully select, execute or integrate its acquisitions, then its business, results of operations and financial condition could be materially adversely affected, and our stock price could decline.

From time to time, Aeva may undertake acquisitions to add new products and technologies, acquire talent, gain new sales channels or enter into new markets or sales territories. In addition to possible stockholder approval, Aeva may need approvals and licenses from relevant government authorities for the acquisitions and to comply with any applicable laws and regulations, which could result in increased delay and costs, and may disrupt Aeva’s business strategy if it fails to do so. Furthermore, acquisitions and the subsequent integration of new assets, businesses, key personnel, customers, vendors and suppliers require significant attention from Aeva’s management and could result in a diversion of resources from Aeva’s existing business, which in turn could have an adverse

23

effect on Aeva’s operations. Acquired assets or businesses may not generate the financial results Aeva expects. Acquisitions could result in the use of substantial amounts of cash, potentially dilutive issuances of equity securities, the occurrence of significant goodwill impairment charges, amortization expenses for other intangible assets and exposure to potential unknown liabilities of the acquired business. Moreover, the costs of identifying and consummating acquisitions may be significant.

To date, Aeva has no experience with acquisitions and the integration of acquired technology and personnel. Failure to successfully identify, complete, manage and integrate acquisitions could materially and adversely affect its business, financial condition and results of operations and could cause our stock price to decline.

Aeva’s sales and operations in international markets expose it to operational, financial and regulatory risks, including possible unfavorable regulatory, political, tax and labor conditions, which could harm Aeva’s business.

International sales comprise a significant amount of Aeva’s overall revenue. Sales to international customers have accounted for a significant portion of Aeva’s revenue since 2018. Aeva is committed to growing its international sales, and while it has committed resources to expanding its international operations and sales channels, these efforts may not be successful. International operations are subject to a number of other risks, including:

The occurrence of any of these risks could negatively affect Aeva’s international business and consequently its business, operating results and financial condition.

24

Aeva faces risks associated with manufacturing operations outside the United States.

Manufacturing outside the United States is subject to several inherent risks, including:

Such risks could increase Aeva’s costs and decrease its profit margins.

The complexity of Aeva’s products could result in unforeseen delays or expenses from undetected defects, errors or reliability issues in hardware or software which could reduce the market adoption of its new products, damage its reputation with current or prospective customers, expose Aeva to product liability and other claims and adversely affect its operating costs.

Aeva’s products are highly technical and very complex and require high standards to manufacture and have in the past and will likely in the future experience defects, errors or reliability issues at various stages of development. Aeva may be unable to timely release new products, manufacture existing products, correct problems that have arisen or correct such problems to its customers’ satisfaction. Additionally, undetected errors, defects or security vulnerabilities, especially as new products are introduced or as new versions are released, could result in serious injury to the end users of technology incorporating Aeva’s products, or those in the surrounding area, its customers never being able to commercialize technology incorporating our products, litigation against Aeva, negative publicity and other consequences. These risks are particularly prevalent in the highly competitive AD and ADAS markets. Some errors or defects in Aeva’s products may only be discovered after they have been tested, commercialized and deployed by customers. If that is the case, Aeva may incur significant additional development costs and product recall, repair or replacement costs. These problems may also result in claims, including class actions, against Aeva by its customers or others. Aeva’s reputation or brand may be damaged as a result of these problems and customers may be reluctant to buy its products, which could adversely affect its ability to retain existing customers and attract new customers and could adversely affect its financial results.

In addition, Aeva could face material legal claims for breach of contract, product liability, fraud, tort or breach of warranty as a result of these problems. Defending a lawsuit, regardless of its merit, could be costly and may divert management’s attention and adversely affect the market’s perception of Aeva and its products. In addition, Aeva’s business liability insurance coverage could prove inadequate with respect to a claim and future coverage may be unavailable on acceptable terms or at all. These product-related issues could result in claims against Aeva and its business could be adversely affected.

Aeva may be subject to product liability or warranty claims that could result in significant direct or indirect costs, which could adversely affect its business and operating results.

Aeva’s customers use its products and technology in various applications, including AD and ADAS applications, which present the risk of significant injury, including fatalities. Aeva may be subject to claims if a product using its technology is involved in an accident and persons are injured or purport to be injured. Any insurance that Aeva carries may not be sufficient or it may not apply to all situations. Similarly, Aeva’s customers could be subjected to claims as a result of such accidents and bring legal claims against Aeva to attempt to hold it liable. In addition, if lawmakers or governmental agencies were to determine that the use of Aeva’s products, including AD or certain ADAS applications, increased the risk of injury to all or a subset of its customers, they may

25

pass laws or adopt regulations that limit the use of Aeva’s products or increase its liability associated with the use of its products or that regulate the use of or delay the deployment the products that use Aeva’s technology, including AD and ADAS technology. Any of these events could adversely affect Aeva’s brand, relationships with customers, operating results or financial condition.

Aeva typically provides a limited-time warranty on its products. The occurrence of any material defects in its products could make Aeva liable for damages and warranty claims. In addition, Aeva could incur significant costs to correct any defects, warranty claims or other problems, including costs related to product recalls. Any negative publicity related to the perceived quality of Aeva’s products could affect its brand image, partner and customer demand, and adversely affect its operating results and financial condition. Also, warranty, recall and product liability claims may result in litigation, including class actions, the occurrence of which could be costly, lengthy and distracting and adversely affect Aeva’s business and operating results.

If Aeva or its suppliers do not maintain sufficient inventory or if they do not adequately manage their respective inventory, Aeva could lose sales or incur higher inventory-related expenses, which could negatively affect Aeva’s operating results.

To ensure adequate inventory supply, Aeva and its suppliers must forecast inventory needs and expenses, place orders sufficiently in advance with their respective suppliers and manufacturing counterparties and manufacture products based on its estimates of future demand for particular products. Fluctuations in the adoption of LiDAR may affect Aeva’s ability to forecast its future operating results, including revenue, gross margins, cash flows and profitability. Aeva’s ability to accurately forecast demand for its products could be affected by many factors, including the rapidly changing nature of the AD and ADAS markets in which it operates, the uncertainty surrounding the market acceptance and commercialization of LiDAR technology, the emergence of new markets, an increase or decrease in customer demand for Aeva’s products or for products and services of its competitors, product introductions by competitors, the COVID-19 pandemic, other health epidemics and outbreaks, and any associated work stoppages or interruptions, unanticipated changes in general market conditions and the weakening of economic conditions or consumer confidence in future economic conditions. If Aeva’s products are commercialized in industries that are quickly growing, including AD and ADAS applications, both of which are currently experiencing rapid growth in demand, Aeva may face challenges acquiring adequate supplies to manufacture its products and/or Aeva and its manufacturing counterparties may not be able to manufacture its products at a rate necessary to satisfy the levels of demand, which would negatively affect Aeva’s revenue. This risk may be exacerbated by the fact that Aeva may not carry or be able to obtain for its manufacturers a significant amount of inventory to satisfy short-term demand increases. If it fails to accurately forecast customer demand, Aeva may experience excess inventory levels or a shortage of products available for sale.

Inventory levels in excess of customer demand may result in inventory write-downs or write-offs and the sale of excess inventory at discounted prices, which would adversely affect Aeva’s financial results, including its gross margin, and have a negative effect on its brand. Conversely, if Aeva underestimates customer demand for its products, Aeva, or its manufacturing counterparties, may not be able to deliver products to meet its requirements, and this could result in damage to Aeva’s brand and customer relationships and adversely affect its revenue and operating results.

The average selling prices of Aeva’s products could decrease rapidly over the life of the product, which may negatively affect Aeva’s revenue and margins. In addition, the selling prices Aeva is able to ultimately charge in the future for the products it is currently developing or commercializing may be less than what Aeva currently projects, which may cause Aeva’s actual operating results to differ materially from its projections.

The prices that Aeva is able to ultimately charge in the future for the products it is currently developing or commercializing may experience declines for a variety of reasons, many of which are outside of Aeva’s control. In order to sell products that have a falling average unit selling price and maintain margins at the same time, Aeva will need to continually reduce product and manufacturing costs. To manage manufacturing costs, Aeva must engineer the most cost-effective design for its products and collaborate with its manufacturing counterparties to reduce manufacturing costs. Aeva also needs to continually introduce new products with higher sales prices and gross margin in order to maintain its overall gross margin. If Aeva is unable to manage the cost of older products or successfully introduce new products with a higher gross margin, its revenue and overall gross margin would likely

26

decline. In addition, the selling prices Aeva is able to ultimately charge in the future for the products it is currently developing or commercializing may be less than what Aeva currently projects, which may cause Aeva’s actual operating results to differ materially from its forecasts and projections.

Adverse conditions in the automotive industry or the global economy more generally could have adverse effects on Aeva’s results of operations.

While Aeva makes its strategic planning decisions based on the assumption that the markets it is targeting will grow, Aeva’s business is dependent, in large part on, and directly affected by, business cycles and other factors affecting the global automobile industry and global economy generally. Automotive production and sales are highly cyclical and depend on general economic conditions and other factors, including consumer spending and preferences, changes in interest rates and credit availability, consumer confidence, fuel costs, fuel availability, environmental impact, governmental incentives and regulatory requirements, and political volatility, especially in energy-producing countries and growth markets. In addition, automotive production and sales can be affected by Aeva’s automotive OEM customers’ ability to continue operating in response to challenging economic conditions and in response to labor relations issues, regulatory requirements, trade agreements and other factors. The volume of automotive production in North America, Europe and the rest of the world has fluctuated, sometimes significantly, from year to year, and Aeva expects such fluctuations to give rise to fluctuations in the demand for its products. Any significant adverse change in any of these factors may result in a reduction in automotive sales and production by Aeva’s automotive OEM customers and could have a material adverse effect on its business, results of operations and financial condition.

The discontinuation, lack of commercial success, or loss of business with respect to a particular vehicle model or technology package, or consumer electronics, consumer health, security or industrial application, for which Aeva is a significant supplier could reduce Aeva’s sales and adversely affect its profitability.

If Aeva is able to secure design wins and its products are included in its customers’ applications, including AD and ADAS products or consumer electronics, consumer health, industrial or security applications, it expects to enter into supply agreements with the relevant customer. For AD and ADAS products, market practice dictates that these supply agreements typically require Aeva to supply a customer’s requirements for a particular vehicle model or AD or ADAS product, rather than supply a set number of products. These contracts can have short terms and/or can be subject to renegotiation, sometimes as frequently as annually, all of which may affect product pricing, and may be terminated by Aeva’s customers at any time. Therefore, even if Aeva is successful in obtaining design wins and the systems into which its products are built are commercialized, the discontinuation of, the loss of business with respect to, or a lack of commercial success of a particular vehicle model or technology package for which Aeva is a significant supplier could mean that the expected sales of Aeva’s products will not materialize, materially and adversely affecting its business. In addition, the loss of business with respect to a customer’s application in the consumer electronics, consumer health, security or industrial application for which Aeva is a significant supplier could reduce Aeva’s sales and adversely affect its profitability.

We may not be able to anticipate changing customer and consumer preferences or respond quickly enough to changes in technology and standards to be able to develop and introduce commercially viable products.

Our ability to maintain and improve existing products, anticipate changes in technology, regulatory and other standards, and to successfully develop and introduce new and enhanced technologies and products on a timely basis will be a significant factor in our ability to be competitive and gain market acceptance. If we are unsuccessful or are less successful than our competitors in predicting the course of market development and perceptions of drivers regarding autonomous driving capabilities and solutions, developing innovative products, processes, and/or use of materials, or adapting to new technologies or evolving regulatory, industry or customer requirements, we will suffer from a competitive disadvantage. Further, the global automotive industry is experiencing a period of significant technological change, including the development of combined software and system-on-chip (“SoC”) hardware solutions to handle the influx of information coming into vehicles from increasing numbers of sensors and efficiently manage multilevel processing in real time while operating within a system's power budget. As a result, the success of portions of our business requires us to develop, acquire and/or incorporate new technologies. We may need to adjust our strategy and projected timelines based on how these technological challenges evolve over time.

27

There is a risk that these challenges will not be overcome, and that our investments in R&D initiatives will not lead to successful new products and a corresponding increase in revenue, which could have a material adverse effect on our business, results of operations and financial condition.

Since many of the markets in which Aeva competes are new and rapidly evolving, it is difficult to forecast long-term end-customer adoption rates and demand for Aeva’s products.

Aeva is pursuing opportunities in markets that are undergoing rapid changes, including technological and regulatory changes, and it is difficult to predict the timing and size of the opportunities. For example, AD and LiDAR-based ADAS, and consumer electronics, consumer health and industrial applications require complex technology. Because these products depend on technology from many companies, commercialization of these products could be delayed or impaired on account of certain technological components of Aeva or others not being ready to be deployed. Although Aeva currently has agreements with commercial counterparties, these companies may not be able to commercialize Aeva’s technology immediately, or at all. Regulatory, safety or reliability developments, many of which are outside of Aeva’s control, could also cause delays or otherwise impair commercial adoption of these new technologies, which will adversely affect Aeva’s growth. Aeva’s future financial performance will depend on its ability to make timely investments in the correct market opportunities. If one or more of these markets experience a shift in customer or prospective customer demand, Aeva’s products may not compete as effectively, if at all, and they may not be designed into commercialized products. Given the evolving nature of the markets in which Aeva operates, it is difficult to predict customer demand or adoption rates for its products or the future growth of the markets in which it operates. If demand does not develop or if Aeva cannot accurately forecast customer demand, the size of its markets, inventory requirements or its future financial results, its business, results of operations and financial condition will be adversely affected.

Aeva currently has and targets many customers, suppliers and production counterparties that are large corporations with substantial negotiating power, exacting product, quality and warranty standards and potentially competitive internal solutions. If Aeva is unable to sell its products to these customers or is unable to enter into agreements with customers, suppliers and production counterparties on satisfactory terms, its prospects and results of operations will be adversely affected.

Many of Aeva’s customers, suppliers, and potential customers are large, multinational corporations with substantial negotiating power relative to it and, in some instances, may have internal solutions that are competitive to Aeva’s products. Many of these large, multinational corporations that are customers, production counterparties or potential customers also have significant development resources, which may allow them to acquire or develop independently, or in partnership with others, competitive technologies. Meeting the technical requirements and securing design wins with any of these companies will require a substantial investment of Aeva’s time and resources. Aeva cannot assure you that its products or technology will secure design wins from these or other companies or that it will generate meaningful revenue from the sales of its products to these key potential customers. If Aeva’s products are not selected by these large corporations or if these corporations develop or acquire competitive technology, it will have an adverse effect on Aeva’s business.

Aeva’s business could be materially and adversely affected if it lost any of its largest customers or if they were unable to pay their invoices.

Although Aeva continues to pursue a broad customer base, it is dependent on a small number of large customers with strong purchasing power. In fiscal year 2021, Aeva’s top two customers accounted for 88% of its revenue. In fiscal year 2020, Aeva’s top two customers represented 76% of its revenue. The loss of business from any of Aeva’s major customers (whether by lower overall demand for its products, cancellation of existing contracts or product orders or the failure to design in its products or award Aeva new business) could have a material adverse effect on its business.

To the extent AD and ADAS become accepted by major automotive OEMs, Aeva expects that it will rely increasingly on Tier 1 suppliers and contract manufactures through which automotive OEMs procure components. Aeva expects that these Tier 1 suppliers will be responsible for certain hardware and software development and configuration activities specific to each OEM, and they may not exclusively carry its products or technology.

28

There is also a risk that one or more of its major customers could be unable to pay Aeva’s invoices as they become due or that a customer will simply refuse to make such payments if it experiences financial difficulties. If a major customer were to enter into bankruptcy proceedings or similar proceedings whereby contractual commitments are subject to stay of execution and the possibility of legal or other modification, Aeva could be forced to record a substantial loss.

If Aeva is unable to establish and maintain confidence in its long-term business prospects among customers and analysts and within its industry or is subject to negative publicity, then Aeva’s financial condition, operating results, business prospects and access to capital may suffer materially.

Aeva has not yet fully developed or commercialized its products or services and the successful commercialization of Aeva’s products depends in part on Aeva’s collaborators, customers and potential customers committing to use Aeva’s technology in their own products. Customers may be less likely to purchase Aeva’s products if they are not convinced that Aeva’s business will succeed or that its service and support and other operations will continue in the long term. Similarly, suppliers and other third parties will be less likely to invest time and resources in developing business relationships with Aeva if they are not convinced that Aeva’s business will succeed. If Aeva is unable to establish and maintain confidence in its long-term business prospects among customers, suppliers, analysts, ratings agencies and analysts and within its industry or is subject to negative publicity, then Aeva’s financial condition, operating results, business prospects and access to capital may suffer materially.

Aeva’s investments in educating its customers and potential customers about the advantages of Aeva’s 4D LiDAR technology and its applications may not result in sales of Aeva’s products or services.

Educating Aeva’s prospective customers, and to a lesser extent, its existing customers, about Aeva’s 4D LiDAR technology, its advantages over other sensing technologies and Aeva’s 4D LiDAR technology’s ability to convey value in different industries and deployments is an integral part of developing new business and the LiDAR market generally. If prospective customers have a negative perception of, or experience with, LiDAR or related technology or a competitor’s LiDAR products they may be reluctant to adopt LiDAR in general or specifically Aeva’s products or technology. Adverse statements about LiDAR by influential market participants may also deter adoption. Some of Aeva’s competitors have significant financial or marketing resources that may allow them to engage in public marketing campaigns about their alternative technology, LiDAR or Aeva’s products or technology. Aeva’s efforts to educate potential customers and the market generally and to counter any adverse statements made by competitors or other market participants will require significant financial and personnel resources. These educational efforts may not be successful and Aeva may not offset the costs of such efforts with revenue from the new customers. If Aeva is unable to acquire new customers to offset these expenses or if the market accepts such adverse statements, its financial condition will be adversely affected.

The period of time from a design win to implementation is long, potentially spanning several years, and Aeva is subject to the risks of cancellation or postponement of the contract or unsuccessful implementation.

Prospective customers, including those in the automotive industry, generally must make significant commitments of resources to test and validate Aeva’s products and confirm that they can integrate with other technologies before including them in any particular system, product or application. The development cycles of Aeva’s products with new customers vary widely depending on the application, market, customer and the complexity of the product. In the automotive market, for example, this development cycle can be five to seven or more years. The development cycle in certain other markets can be months to one or two years. These development cycles result in Aeva investing its resources prior to realizing any revenue from the commercialization. Further, Aeva is subject to the risk that customers cancel or postpone implementation of its technology, as well as that it will not be able to integrate its technology successfully into a larger system with other sensing modalities. Further, Aeva’s revenue could be less than forecasted if the system, product or application that includes its products is unsuccessful, including for reasons unrelated to its technology. Long development cycles and product cancellations or postponements may adversely affect Aeva’s business, results of operations and financial condition.

29

Aeva operates in a highly competitive market and some market participants have substantially greater resources. Aeva competes against a large number of both established competitors and new market entrants with respect to, among other things, cost, product specifications and technology.

The markets for sensing technology are highly competitive, particularly in the automotive industry. Aeva’s future success will depend on its ability to emerge as a leader in its targeted markets by continuing to develop and protect from infringement advanced 4D LiDAR technology in a timely manner and to effectively compete with existing and new competitors. Aeva’s competitors are numerous and they compete with it directly by offering LiDAR products and indirectly by attempting to solve some of the same challenges with different technology. Aeva faces competition from camera and radar companies, other developers of LiDAR products, Tier 1 suppliers and other technology and automotive supply companies, some of which have significantly greater resources than it does. In the automotive market, Aeva’s competitors have commercialized both LiDAR and non-LiDAR-based ADAS technology that has achieved market adoption, strong brand recognition and may continue to improve. Other competitors are working towards commercializing AD technology and either by themselves, or with a publicly announced partner, have substantial financial, marketing, R&D and other resources. Some of Aeva’s customers in the autonomous vehicle and ADAS markets have announced development efforts or made acquisitions directed at creating their own LiDAR-based or other sensing technologies, which would compete with Aeva’s products. Aeva does not know how close these competitors are to commercializing AD systems or novel ADAS applications. In markets outside of the automotive industry, its competitors, like Aeva, seek to develop new sensing applications across industries. Even in these emerging markets, Aeva faces substantial competition from numerous competitors seeking to prove the value of their technology.

Additionally, increased competition may result in pricing pressure and reduced margins and may impede Aeva’s ability to increase the sales of its products or cause it to lose market share, any of which will adversely affect its business, results of operations and financial condition.

We may not have sufficient resources to fund our operating costs or all of our future research and development and capital expenditures or possible acquisitions or joint ventures.

Although we expect our current cash balance, combined with our future cash flows, will address our capital needs through 2022, we cannot be assured that this will be the case. Our operating environment is increasingly challenging, and our business and strategic plans may consume resources faster than we presently anticipate. In order to remain competitive, we must make substantial investments in research and development. Our products may require significant resources to develop both hardware and software solutions. Challenges of integrating new functionality into vehicles and the evolution of our customers’ performance requirements during development may also increase R&D costs. Customer demands for changes to our products to meet such performance requirements are difficult to predict both in terms of timing and cost. We may be unable to fund all of our research and development and capital investment needs or possible acquisitions or joint ventures, and we may have to pass on valuable long-term opportunities that arise. An inability to fund our future R&D, capital expenditures and product development needs could have a material adverse effect on our business, results of operations and financial condition.

The markets in which Aeva competes are characterized by rapid technological change, which requires Aeva to continue to develop new products and product innovations and could adversely affect market adoption of its products.

While Aeva intends to invest substantial resources to technological development, continuing technological changes in sensing technology, LiDAR and the markets for these products, including the ADAS and AD industries, could adversely affect adoption of LiDAR and/or Aeva’s products, either generally or for particular applications. Aeva’s future success will depend upon its ability to develop and introduce a variety of new capabilities and innovations to its product offerings, as well as introduce a variety of new product offerings, to address the changing needs of the markets in which Aeva offers its products. Delays in delivering new products that meet customer requirements could damage Aeva’s relationships with customers and lead them to seek alternative sources of supply. In addition, Aeva’s success to date has been based on the delivery of prototypes and services to R&D programs in which developers are investing substantial capital to develop new systems. Aeva’s continued success relies on the success of the R&D phase of these customers as they expand into commercialized projects. As autonomous technology reaches the stage of large-scale commercialization, Aeva will be required to develop and deliver

30

products at price points that enable wider and ultimately mass-market adoption. Delays in introducing products and innovations, the failure to choose correctly among technical alternatives or the failure to offer innovative products or configurations at competitive prices may cause existing and potential customers to purchase Aeva’s competitors’ products or turn to alternative sensing technology.

If Aeva is unable to devote adequate resources to develop products or cannot otherwise successfully develop products or system configurations that meet customer requirements on a timely basis or that remain competitive with technological alternatives, its products could lose market share, its revenue will decline, it may experience operating losses and its business and prospects will be adversely affected.

Developments in alternative technology may adversely affect the demand for Aeva’s 4D LiDAR technology.

Significant developments in alternative technologies, such as cameras and radar, may materially and adversely affect Aeva’s business, prospects, financial condition and operating results in ways Aeva does not currently anticipate. Existing and other camera and radar technologies may emerge as customers’ preferred alternative to Aeva’s 4D LiDAR technology. Any failure by Aeva to develop new or enhanced technologies or processes, or to react to changes in existing technologies, could materially delay Aeva’s development and introduction of new and enhanced products in the autonomous vehicle industry, which could result in the loss of competitiveness of Aeva’s products and technology, decreased revenue and a loss of market share to competitors. Aeva’s R&D efforts may not be sufficient to adapt to changes in technology. As technologies change, Aeva plans to upgrade or adapt its products with the latest technology. However, Aeva’s products and technology may not compete effectively with alternative systems if Aeva is not able to source and integrate the latest technology into its existing products or technology.

Because LiDAR is new in most of the markets Aeva is seeking to enter, Aeva’s forecasts of market growth may not be accurate.

Market opportunity estimates and growth forecasts are subject to significant uncertainty and are based on assumptions and estimates that may not prove to be accurate. Even if these markets experience the forecasted growth, Aeva may not grow its business at similar rates, or at all. Aeva’s future growth is subject to many factors, including market adoption of its products, which is subject to many risks and uncertainties. Accordingly, any forecasts and estimates of market size and growth described herein, should not be taken as indicative of Aeva’s future growth. In addition, these forecasts do not take into account the impact of the current global COVID-19 pandemic, and Aeva cannot assure you that these forecasts will not be materially and adversely affected as a result.

We are required to maintain effective internal control over financial reporting. Our management previously identified material weaknesses in our internal control over financial reporting which were remediated in the fourth quarter of fiscal year 2021. If other material weaknesses or control deficiencies are identified in the future, we may not be able to report our financial results accurately, prevent fraud or file our periodic reports in a timely manner, which may adversely affect investor confidence in our Company and, as a result, the value of our common stock.

A material weakness is a deficiency or combination of deficiencies in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of its financial statements would not be prevented or detected on a timely basis. These deficiencies could result in additional material misstatements to its financial statements that could not be prevented or detected on a timely basis.

We identified a material weakness in connection with Aeva’s financial statement close process for the years ended December 31, 2019, and 2020 that resulted from a lack of necessary business processes, internal controls, and adequate number of qualified personnel within its accounting function who possessed an appropriate level of expertise to effectively and timely identify, select and apply GAAP sufficiently to provide reasonable assurance that transactions were appropriately recorded. This also resulted in Aeva not having adequate risk assessment and design of internal control activities surrounding Aeva’s financial close and reporting process to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements.

31

In addition, we identified material weaknesses in the operation of our internal control over financial reporting related to accounting for the Company’s private placement warrants related to the Business Combination. Based on management’s evaluation, the Audit Committee of our Board of Directors (the “Audit Committee”), in consultation with management, concluded that the Company’s private placement warrants are not indexed to the Company’s common stock in the manner contemplated by ASC 815-40. As a result, the Company should have classified the private placement warrants as derivative liabilities measured at their estimated fair values at the end of each reporting period and recognized changes in the estimated fair value of the derivative instruments from the prior period in the Company’s operating results for the current period.

These material weaknesses were remediated in the fourth quarter of fiscal year 2021. We cannot be certain that other material weaknesses and control deficiencies will not occur in the future or that the measures we have taken to date, and actions we may take in the future, will be sufficient to prevent or avoid potential future material weaknesses. If other material weaknesses are identified in the future, or if we are not able to comply with the requirements of Section 404 of the Sarbanes-Oxley Act in a timely manner, our reported financial results could be materially misstated and we could be subject to investigations or sanctions by regulatory authorities, which would require additional financial and management resources, and the value of our common stock could decline.

To the extent we identify future weaknesses or deficiencies, there could be material misstatements in our consolidated financial statements and we could fail to meet our financial reporting obligations. The identification of such a material weakness could materially and adversely affect our business, our financial condition and the value of our common stock. If we are unable to assert that our internal control over financial reporting is effective in the future, investor confidence in the accuracy and completeness of our financial reports could be further eroded, which would have a material adverse effect on the price of our common stock.

If Aeva fails to maintain an effective system of internal controls, its ability to produce timely and accurate financial statements or comply with applicable regulations could be adversely affected.

We are subject to the reporting requirements of the Exchange Act, the Sarbanes-Oxley Act and the rules and regulations of the NYSE. Aeva expects that the requirements of these rules and regulations will continue to increase its legal, accounting and financial compliance costs, make some activities more difficult, time-consuming and costly, and place significant strain on its personnel, systems and resources.

The Sarbanes-Oxley Act requires, among other things, that Aeva maintain effective disclosure controls and procedures and internal control over financial reporting. Aeva is continuing to develop and refine its disclosure controls, internal control over financial reporting and other procedures that are designed to ensure that information required to be disclosed by it in the reports that it will file with the SEC is recorded, processed, summarized and reported within the time periods specified in SEC rules and forms, and that information required to be disclosed in reports under the Exchange Act is accumulated and communicated to Aeva’s principal executive and financial officers.

Aeva’s current controls and any new controls that it develops may be inadequate because of changes in conditions in its business. Further, additional weaknesses in Aeva’s internal controls may be discovered in the future. Any failure to develop or maintain effective controls, or any difficulties encountered in their implementation or improvement, could adversely affect Aeva’s operating results or cause it to fail to meet its reporting obligations and may result in a restatement of Aeva’s financial statements for prior periods. Any failure to implement and maintain effective internal controls also could adversely affect the results of periodic management evaluations and annual independent registered public accounting firm attestation reports regarding the effectiveness of Aeva’s internal control over financial reporting that it is required to include in its periodic reports filed with the SEC under Section 404 of the Sarbanes-Oxley Act. Ineffective disclosure controls and procedures and internal control over financial reporting could also cause investors to lose confidence in Aeva’s reported financial and other information.

In order to maintain and improve the effectiveness of its disclosure controls and procedures and internal control over financial reporting, Aeva has expended and anticipates that it will continue to expend significant resources, including accounting-related costs, and provide significant management oversight. Any failure to maintain the adequacy of its internal controls, or consequent inability to produce accurate financial statements on a timely basis, could increase Aeva’s operating costs and could materially and adversely affect its ability to operate its

32

business. If Aeva’s internal controls are perceived as inadequate or that it is unable to produce timely or accurate financial statements, investors may lose confidence in Aeva’s operating results and the stock price of the Company could decline.

The Company’s independent registered public accounting firm is required to formally attest to the effectiveness of its internal control over financial reporting annually. Our independent registered public accounting firm may issue a report that is adverse in the event it is not satisfied with the level at which Aeva’s controls are documented, designed or operating. Any failure to maintain effective disclosure controls and internal control over financial reporting could have a material and adverse effect on the Company’s business and operating results.

In addition to Aeva’s results determined in accordance with GAAP, Aeva believes certain non-GAAP measures may be useful in evaluating its operating performance. Aeva may present certain non-GAAP financial measures and intends to continue to present certain non-GAAP financial measures in future filings with the SEC and other public statements. Any failure to accurately report and present our non-GAAP financial measures could cause investors to lose confidence in our reported financial and other information, which would likely have a negative effect on the trading price of its common stock.

Aeva’s ability to use its net operating loss carryforwards and certain other tax attributes may be limited.

As of December 31, 2021, Aeva had 144.5 million of U.S. federal and 123.4 million of state net operating loss carryforwards available to reduce future taxable income, of which 141.3 million will be carried forward indefinitely for U.S. federal tax purposes and the remainder of losses will expire beginning in 2036 for federal and state tax purposes. The Company also has federal and California research and development tax credit carryforwards of $6.1 million and $4.9 million, respectively. The federal research credit carryforwards will expire in 2036 and California research credits can be carried forward indefinitely. It is possible that Aeva will not generate taxable income in time to use these net operating loss carryforwards before their expiration or at all. In addition, the federal and state net operating loss carryforwards and certain tax credits may be subject to significant limitations under Section 382 and Section 383 of the Internal Revenue Code of 1986, as amended (the “Code”), respectively, and similar provisions of state law. Under those sections of the Code, if a corporation undergoes an “ownership change,” the corporation’s ability to use its pre-change net operating loss carryforwards and other pre-change attributes to offset its post-change income or tax may be limited. In general, an “ownership change” will occur if there is a cumulative change in our ownership by “5-percent shareholders” that exceeds 50 percentage points over a rolling three-year period. Similar rules may apply under state tax laws. Aeva has not completed an analysis as to whether it has previously undergone an ownership change under these rules, and Aeva may experience ownership changes in the future. To the extent Aeva is not able to offset future taxable income with its net operating losses, Aeva’s cash flows may be adversely affected.

Aeva is highly dependent on the services of Soroush Salehian Dardashti and Mina Rezk, its two founders.

Aeva is highly dependent on its co-founders, Soroush Salehian Dardashti and Mina Rezk. Messrs. Salehian and Rezk remain deeply involved in all aspects of Aeva’s business, including product development. The loss of either of Messrs. Salehian and Rezk would adversely affect Aeva’s business because his loss could make it more difficult to, among other things, compete with other market participants, manage Aeva’s R&D activities and retain existing customers or cultivate new ones. Negative public perception of, or negative news related to, either of Messrs. Salehian and Rezk may adversely affect Aeva’s brand, relationship with customers or standing in the industry.

Aeva’s business depends substantially on the efforts of its executive officers and highly skilled personnel, and its operations may be severely disrupted if it lost their services.

Competition for highly-skilled personnel is often intense, especially in the San Francisco Bay Area, where Aeva’s office is located, and Aeva may incur significant costs to attract highly-skilled personnel. Aeva may not be successful in attracting, integrating, or retaining qualified personnel to fulfill its current or future needs. Aeva has, from time to time, experienced, and it expects to continue to experience, difficulty in hiring and retaining highly skilled employees with appropriate qualifications.

33

In addition, job candidates and existing employees often consider the value of the equity awards they receive in connection with their employment. If the perceived value of Aeva’s equity or equity awards declines, it may adversely affect Aeva’s ability to retain highly skilled employees. If Aeva fails to attract new personnel or fails to retain and motivate its current personnel, its business and future growth prospects could be adversely affected.

Legal and Regulatory Risks

Aeva is subject to governmental export and import control laws and regulations. Aeva’s failure to comply with these laws and regulations could have an adverse effect on its business, prospects, financial condition and results of operations.

Aeva’s products and services are subject to export control and import laws and regulations, including the U.S. Export Administration Regulations, U.S. Customs regulations and various economic and trade sanctions regulations administered by the U.S. Treasury Department’s Office of Foreign Assets Controls. U.S. export control laws and regulations and economic sanctions prohibit the shipment of certain products and services to U.S. embargoed or sanctioned countries, governments and persons. In addition, complying with export control and sanctions regulations for a particular sale may be time-consuming and result in the delay or loss of sales opportunities. Exports of Aeva’s products and technology must be made in compliance with these laws and regulations. If Aeva fails to comply with these laws and regulations, Aeva and certain of its employees could be subject to substantial civil or criminal penalties, including the possible loss of export or import privileges, fines, which may be imposed on Aeva and responsible employees or managers and, in extreme cases, the incarceration of responsible employees or managers.

Changes to trade policy, tariffs and import/export regulations may have a material adverse effect on Aeva’s business, financial condition and results of operations.

Changes in global political, regulatory and economic conditions or in laws and policies governing foreign trade, manufacturing, development and investment in the territories or countries where Aeva may purchase its components, sell its products or conduct its business could adversely affect Aeva’s business. The United States has recently instituted or proposed changes in trade policies that include the negotiation or termination of trade agreements, the imposition of higher tariffs on imports into the United States, economic sanctions on individuals, corporations or countries, and other government regulations affecting trade between the United States and other countries where Aeva conducts its business. A number of other nations have proposed or instituted similar measures directed at trade with the United States in response. As a result of these developments, there may be greater restrictions and economic disincentives on international trade that could adversely affect Aeva’s business. For example, such changes could adversely affect the automotive market, Aeva’s ability to access key components or raw materials needed to manufacture its products (including, but not limited to, rare-earth metals), Aeva’s ability to sell its products to customers outside of the United States and the demand for its products. It may be time-consuming and expensive for Aeva to alter its business operations to adapt to or comply with any such changes, and any failure to do so could have a material adverse effect on its business, financial condition and results of operations.

Our business may be adversely affected by regulations affecting the automobile safety and autonomous driving markets.

Government vehicle safety regulations are a key driver in our business. Historically, these regulations have imposed ever more stringent safety regulations for vehicles. Safety regulations have a positive impact on driver awareness and acceptance of active safety products and technology. These more stringent safety regulations often require vehicles to have more safety CPV and more advanced safety products, including active safety and driver assistance technology, which is a growth driver for the Company.

34

Changes in legislative, regulatory or industry requirements related to vehicle safety content may also render certain of our technologies or products obsolete or less attractive to our customers. Vehicle safety content requirements are subject to change based on a number of factors that are not within our control, including new scientific or medical data, adverse publicity regarding autonomous vehicles or technology, domestic and foreign political developments or considerations, and litigation relating to our products and our competitors’ products. Changes in government regulations in response to these and other considerations could have a severe impact on our business. If government priorities shift and we are unable to adapt to changing regulations, our business may suffer material adverse effects.

The regulatory obligation of complying with safety regulations could increase as federal and local regulators impose more stringent compliance and reporting requirements in response to product recalls, safety issues and product innovations in our industry. In the U.S., we are subject to the existing Transportation Recall Enhancement, Accountability and Documentation (TREAD) Act, which requires manufacturers to comply with “Early Warning” requirements by reporting to the National Highway Traffic Safety Administration (“NHTSA”) information related to defects or reports of death related to their products. TREAD imposes criminal liability for violating such requirements if a defect subsequently causes death or bodily injury. In addition, the National Traffic and Motor Vehicle Safety Act authorizes NHTSA to require a manufacturer to recall and repair vehicles that contain safety defects or fail to comply with federal motor vehicle safety standards. In September 2016, United States Department of Transportation issued a Federal Automated Vehicles Policy as agency guidance for comment rather than in a rulemaking in order to enable the delivery of an initial regulatory framework and best practices to guide manufacturers and other entities in the safe design, development, testing, and deployment of highly automated vehicles. Since September 2016, the U.S. Department of Transportation has issued voluntary “guidance” for autonomous vehicle (AV) standards, including “Ensuring American Leadership in Automated Vehicle Technologies – Automated Vehicles 4.0” dated January 2020, to promote autonomous vehicle development. It is unknown when specific U.S. regulations for AVs may be released and what, if any, impact such regulations may have on us or our customers in terms of products, features and performance requirements.

As our technologies advance and develop beyond traditional automotive products, we may be subject to regulatory regimes beyond traditional vehicle safety rules and requirements. As a result, we may not identify all regulatory licenses or permits required for our products, or our products may operate beyond the scope of the licenses and permits we have obtained. Failing to obtain the required licenses, permits or other regulatory authorizations could result in investigations, fines or other penalties or proceedings. If any of the regulatory risks described above materialize, it could have a material adverse effect on our business, results of operations and financial condition.

Aeva may become involved in legal and regulatory proceedings and commercial or contractual disputes, which could have an adverse effect on its profitability and financial position.

Aeva may be, from time to time, involved in litigation, regulatory proceedings and commercial or contractual disputes that may be significant. These matters may include, without limitation, disputes with Aeva’s suppliers and customers, intellectual property claims, stockholder litigation, government investigations, class action lawsuits, personal injury claims, environmental issues, customs and value-added tax disputes and employment and tax issues. In addition, Aeva could face in the future a variety of labor and employment claims against it, which could include but is not limited to general discrimination, wage and hour, privacy, ERISA or disability claims. In such matters, government agencies or private parties may seek to recover from Aeva very large, indeterminate amounts in penalties or monetary damages (including, in some cases, treble or punitive damages) or seek to limit Aeva’s operations in some way. These types of lawsuits could require significant management time and attention or could involve substantial legal liability, adverse regulatory outcomes, and/or substantial expenses to defend. Often these cases raise complex factual and legal issues and create risks and uncertainties. No assurances can be given that any proceedings and claims will not have a material adverse impact on Aeva’s operating results and financial position or that its established reserves or its available insurance will mitigate this impact.

35

Aeva is subject to, and must remain in compliance with, numerous laws and governmental regulations across various jurisdictions concerning the manufacturing, use, distribution and sale of its products. Some of Aeva’s customers also require that it comply with their own unique requirements relating to these matters.

Aeva manufactures and sells products that contain electronic components, and such components may contain materials that are subject to government regulation in both the locations where Aeva manufactures and assembles its products, as well as the locations where Aeva sells its products. For example, certain regulations limit the use of lead in electronic components. Since Aeva operates on a global basis, this is a complex process which requires continual monitoring of regulations and an ongoing compliance process to ensure that Aeva and its suppliers are in compliance with existing regulations in each market where it operates. If there is an unanticipated new regulation that significantly impacts Aeva’s use and sourcing of various components or requires more expensive components, that regulation could materially adversely affect its business, results of operations and financial condition.

Aeva’s products are used for AD and ADAS applications, which are subject to complicated regulatory schemes that vary from jurisdiction to jurisdiction. These are rapidly evolving areas where new regulations could impose limitations on the use of LiDAR generally or Aeva’s products specifically. If Aeva fails to adhere to these new regulations or fails to continually monitor the updates, it may be subject to litigation, loss of customers or negative publicity and its business, results of operations and financial condition will be adversely affected.

Aeva is subject to various environmental laws and regulations that could impose substantial costs upon Aeva.

Concerns over environmental pollution and climate change have produced significant legislative and regulatory efforts on a global basis, and Aeva believes this will continue both in scope and in the number of countries participating. In addition, as climate change issues become more prevalent, foreign, federal, state and local governments and Aeva’s customers have been responding to these issues. The increased focus on environmental sustainability may result in new regulations and customer requirements, or changes in current regulations and customer requirements, which could materially adversely impact Aeva’s business, results of operations and financial condition. If Aeva is unable to effectively manage real or perceived issues, including concerns about environmental impacts or similar matters, sentiments toward Aeva or its products could be negatively impacted, and its business, results of operations or financial condition could suffer.

Aeva’s operations are and will be subject to international, federal, state and local environmental laws and regulations, and such laws and regulations could directly increase the cost of energy, which may have an effect on the way Aeva manufactures products or utilizes energy to produce its products. In addition, any new regulations or laws in the environmental area might increase the cost of raw materials or key components Aeva uses in its products. Environmental regulations may require Aeva to reduce product energy usage, monitor and exclude an expanding list of restricted substances and to participate in required recovery and recycling of its products. Environmental and health and safety laws and regulations can be complex, and Aeva has limited experience complying with them. Capital and operating expenses needed to comply with environmental laws and regulations can be significant, and violations may result in substantial fines and penalties, third-party damages, suspension of production, or cessation of Aeva’s operations.

Contamination at properties Aeva operates, Aeva formerly operated or to which hazardous substances were sent by Aeva, may result in liability for Aeva under environmental laws and regulations, including, but not limited to, the Comprehensive Environmental Response, Compensation and Liability Act, which can impose liability for the full amount of remediation-related costs without regard to fault, for the investigation and cleanup of contaminated soil and ground water, for building contamination and impacts to human health and for damages to natural resources. The costs of complying with environmental laws and regulations and any claims concerning noncompliance, or liability with respect to contamination in the future, could have a material adverse effect on Aeva’s financial condition or operating results. Aeva may face unexpected delays in obtaining the required permits and approvals in connection with its planned production facilities that could require significant time and financial resources and delay its ability to operate these facilities, which would adversely impact Aeva’s business, prospects, financial condition and operating results.

36

Aeva is subject to U.S. and foreign anti-corruption and anti-money laundering laws and regulations. Aeva can face criminal liability and other serious consequences for violations, which can harm its business.

Aeva is subject to the U.S. Foreign Corrupt Practices Act of 1977, as amended, the U.S. domestic bribery statute contained in 18 U.S.C. § 201, the U.S. Travel Act, the USA PATRIOT Act and possibly other anti-bribery and anti-money laundering laws in countries in which Aeva conducts activities. Anti-corruption laws are interpreted broadly and prohibit companies and their employees, agents, contractors and other collaborators from authorizing, promising, offering or providing, directly or indirectly, improper payments or anything else of value to recipients in the public or private sector. Aeva can be held liable for the corrupt or other illegal activities of its employees, agents, contractors and other collaborators, even if Aeva does not explicitly authorize or have actual knowledge of such activities. Any violations of the laws and regulations described above may result in substantial civil and criminal fines and penalties, imprisonment, the loss of export or import privileges, debarment, tax reassessments, breach of contract and fraud litigation, reputational harm and other consequences.

Aeva’s business may be adversely affected by changes in automotive, consumer electronics, LiDAR sensor and laser safety regulations or concerns that drive further regulation of the automobile, consumer electronics, LiDAR sensor and laser markets.

Government product safety regulations are an important factor for Aeva’s business. Historically, these regulations have imposed ever-more stringent safety regulations for vehicles and laser products. These safety regulations often require, or customers demand that, vehicles have more safety features per vehicle and more advanced safety products.

While Aeva believes increasing automotive and laser safety standards will present a market opportunity for its products, government safety regulations are subject to change based on a number of factors that are not within its control, including, among others, new scientific or technological data, adverse publicity regarding the industry recalls and safety risks of AD and ADAS, accidents involving its products, domestic and foreign political developments or considerations, and litigation relating to its products and its competitors’ products. Changes in automotive, consumer electronics, LiDAR sensor and laser safety government regulations, especially in the AD and ADAS industries, could adversely affect Aeva’s business. If government priorities shift and Aeva is unable to adapt to changing regulations, its business may be materially and adversely affected.

Federal and local regulators impose more stringent compliance and reporting requirements in response to product recalls and safety issues in the automotive and laser industry. As cars that carry Aeva’s sensors go into production, the obligations of complying with safety regulations and reporting requirements could increase and it could require increased resources and adversely affect Aeva’s business.

Autonomous and ADAS features may be delayed in adoption by OEMs, and Aeva’s business impacted, as additional emissions and safety requirements are imposed on vehicle manufacturers.

Vehicle regulators globally continue to consider new and enhanced emissions requirements, including electrification, to meet environmental and economic needs as well as pursue new safety standards to address emerging traffic risks. To control new vehicle prices, among other concerns, OEMs may need to dedicate technology and cost additions to new vehicle designs to meet these emissions and safety requirements and postpone the consumer cost pressures of new autonomous and ADAS features.

Aeva’s business may be adversely affected if it fails to comply with the regulatory requirements under the Federal Food, Drug, and Cosmetic or the Food and Drug Administration (the “FDA”).

As a LiDAR technology company, Aeva is subject to the Electronic Product Radiation Control Provisions of the Federal Food, Drug, and Cosmetic Act. These requirements are enforced by the FDA. Electronic product radiation includes laser technology. Regulations governing these products are intended to protect the public from hazardous or unnecessary exposure. Manufacturers are required to certify in product labeling and reports to the FDA that their products comply with applicable performance standards as well as maintain manufacturing, testing, and distribution records for their products. Failure to comply with these requirements could result in enforcement action

37

by the FDA, which could require Aeva to cease distribution of its products, recall or remediate products already distributed to customers, or subject Aeva to FDA enforcement.

Failures, or perceived failures, to comply with privacy, data protection, and information security requirements in the variety of jurisdictions in which Aeva operates may adversely impact its business, and such legal requirements are evolving, uncertain and may require improvements in, or changes to, Aeva’s policies and operations.

Aeva’s current and potential future operations and sales subject it to laws and regulations addressing privacy and the collection, use, storage, disclosure, transfer and protection of a variety of types of data. For example, the European Commission has adopted the General Data Protection Regulation and California recently enacted the California Consumer Privacy Act of 2018, both of which provide for potentially material penalties for non-compliance. These regimes may, among other things, impose data security requirements, disclosure requirements, and restrictions on data collection, uses, and sharing that may impact Aeva’s operations and the development of its business. Aeva has limited access to, collect, store, process, or share certain information collected by its products, and Aeva’s products may evolve to collect additional information. Therefore, the full impact of these privacy regimes on Aeva’s business is rapidly evolving across jurisdictions and remains uncertain at this time.

Aeva may also be affected by cyber-attacks and other means of gaining unauthorized access to its products, systems, and data. For instance, cybercriminals or insiders may target Aeva or third parties with which it has business relationships to obtain data, or in a manner that disrupts Aeva’s operations or compromises its products or the systems into which its products are integrated.

Aeva is assessing the continually evolving privacy and data security regimes and measures it believes are appropriate in response. Since these data security regimes are evolving, uncertain and complex, especially for a global business like Aeva’s, it may need to update or enhance its compliance measures as its products, markets and customer demands further develop, and these updates or enhancements may require implementation costs. In addition, Aeva may not be able to monitor and react to all developments in a timely manner. The compliance measures Aeva does adopt may prove ineffective. Any failure, or perceived failure, by Aeva to comply with current and future regulatory or customer-driven privacy, data protection, and information security requirements, or to prevent or mitigate security breaches, cyber-attacks, or improper access to, use of, or disclosure of data, or any security issues or cyber-attacks affecting Aeva, could result in significant liability, costs (including the costs of mitigation and recovery), and a material loss of revenue resulting from the adverse impact on its reputation and brand, loss of proprietary information and data, disruption to its business and relationships, and diminished ability to retain or attract customers and business partners. Such events may result in governmental enforcement actions and prosecutions, private litigation, fines and penalties or adverse publicity, and could cause customers and business partners to lose trust in Aeva, which could have an adverse effect on its reputation and business.

Regulations related to conflict minerals may cause Aeva to incur additional expenses and could limit the supply and increase the costs of certain metals used in the manufacturing of its products.

Aeva is subject to the requirements under the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, or the Dodd-Frank Act, that will require it to determine, disclose and report whether its products contain conflict minerals. The implementation of these requirements could adversely affect the sourcing, availability and pricing of the materials used in the manufacture of components used in Aeva’s products. In addition, Aeva will incur additional costs to comply with the disclosure requirements, including costs related to conducting diligence procedures to determine the sources of conflict minerals that may be used in or necessary to the production of its products and, if applicable, potential changes to products, processes or sources of supply as a consequence of such verification activities. It is also possible that its reputation may be adversely affected if Aeva determines that certain of its products contain minerals not determined to be conflict-free or if Aeva is unable to alter its products, processes or sources of supply to avoid use of such materials.

38

Risks Related to Aeva’s Intellectual Property

Despite the actions Aeva is taking to defend and protect its intellectual property, Aeva may not be able to adequately protect or enforce its intellectual property rights or prevent unauthorized parties from copying or reverse engineering its products or technology. Aeva’s efforts to protect and enforce its intellectual property rights and prevent third parties from violating its rights may be costly.

The success of Aeva’s products and its business depend in part on Aeva’s ability to obtain patents and other intellectual property rights and maintain adequate legal protection for its products in the United States and other international jurisdictions. Aeva relies on a combination of patent, service mark, trademark and trade secret laws, as well as confidentiality procedures and contractual restrictions, to establish and protect its proprietary rights, all of which provide only limited protection.

Aeva cannot assure you that any patents will be issued with respect to its currently pending patent applications or that any trademarks will be registered with respect to its currently pending applications in a manner that gives Aeva adequate defensive protection or competitive advantages, if at all, or that any patents issued to Aeva or any trademarks registered by it will not be challenged, invalidated or circumvented. Aeva may file for patents and trademarks in the United States and in certain international jurisdictions, but such protections may not be available in all countries in which it operates or in which Aeva seeks to enforce its intellectual property rights, or may be difficult to enforce in practice. For example, the legal environment relating to intellectual property protection in certain emerging market countries where Aeva may operate in the future is relatively weaker, often making it difficult to create and enforce such rights. Aeva’s currently-registered trademarks and any patents and trademarks that may be issued or registered, as applicable, in the future with respect to pending or future applications may not provide sufficiently broad protection or may not prove to be enforceable in actions against alleged infringers. Aeva’s foreign intellectual property portfolio is not as comprehensive as its U.S. intellectual property portfolio and may not protect its intellectual property in some countries where its products are sold or may be sold in the future. Aeva cannot be certain that the steps it has taken will prevent unauthorized use of its technology or the reverse engineering of its technology. Moreover, others may independently develop technologies that are competitive to Aeva or infringe Aeva’s intellectual property.

Protecting against the unauthorized use of Aeva’s intellectual property, products and other proprietary rights is expensive and difficult, particularly internationally. Aeva believes that its intellectual property is foundational in the area of LiDAR products and intends to enforce the intellectual property portfolio it has built over the years. Unauthorized parties may attempt to copy or reverse engineer Aeva’s LiDAR technology or certain aspects of Aeva’s products that it considers proprietary. Litigation may be necessary in the future to enforce or defend Aeva’s intellectual property rights, to prevent unauthorized parties from copying or reverse engineering its products or technology to determine the validity and scope of the proprietary rights of others or to block the importation of infringing products into the United States.

Any such litigation, whether initiated by Aeva or a third party, could result in substantial costs and diversion of management resources, either of which could adversely affect Aeva’s business, operating results and financial condition. Even if it obtains favorable outcomes in litigation, Aeva may not be able to obtain adequate remedies, especially in the context of unauthorized parties copying or reverse engineering its products or technology.

Further, many of Aeva’s current and potential competitors have the ability to dedicate substantially greater resources to defending intellectual property infringement claims and to enforcing their intellectual property rights than Aeva has. Attempts to enforce its rights against third parties could also provoke these third parties to assert their own intellectual property or other rights against Aeva or result in a holding that invalidates or narrows the scope of Aeva’s rights, in whole or in part. Effective patent, trademark, service mark, copyright and trade secret protection may not be available in every country in which Aeva’s products are available and competitors based in other countries may sell infringing products in one or more markets. Failure to adequately protect Aeva’s intellectual property rights could result in Aeva’s competitors offering similar products, potentially resulting in the loss of some of Aeva’s competitive advantage and a decrease in its revenue, which would adversely affect Aeva’s business, operating results, financial condition and prospects.

39

Third-party claims that Aeva is infringing intellectual property, whether successful or not, could subject Aeva to costly and time-consuming litigation or expensive licenses, and its business could be adversely affected.

Although Aeva has applied for patents related to its products, a number of companies, both within and outside of the LiDAR industry, hold patents covering aspects of LiDAR products. In addition to these patents, participants in this industry typically also protect their technology, especially embedded software, through copyrights and trade secrets. As a result, there is frequent litigation based on allegations of infringement, misappropriation or other violations of intellectual property rights. Aeva may in the future receive inquiries from other intellectual property holders and may become subject to claims that it infringes their intellectual property rights, particularly as Aeva expands its presence in the market, expands to new use cases and faces increasing competition. In addition, parties may claim that the names and branding of Aeva’s products infringe their trademark rights in certain countries or territories. If such a claim were to prevail, Aeva may have to change the names and branding of its products in the affected territories and it could incur other costs.

Aeva currently has a number of agreements in effect pursuant to which it has agreed to defend, indemnify and hold harmless its customers, suppliers, and channel partners and other counterparties from damages and costs which may arise from the infringement by Aeva’s products of third-party patents or other intellectual property rights. The scope of these indemnity obligations varies, but may, in some instances, include indemnification for damages and expenses, including attorneys’ fees. Aeva’s insurance may not cover all intellectual property infringement claims. A claim that its products infringe a third party’s intellectual property rights, even if untrue, could adversely affect Aeva’s relationships with its customers, may deter future customers from purchasing its products and could expose Aeva to costly litigation and settlement expenses. Even if Aeva is not a party to any litigation between a customer and a third party relating to infringement by its products, an adverse outcome in any such litigation could make it more difficult for Aeva to defend its products against intellectual property infringement claims in any subsequent litigation in which it is a named party. Any of these results could adversely affect Aeva’s brand and operating results.

Aeva may in the future need to initiate infringement claims or litigation in order to try to protect its intellectual property rights. In addition to litigation where Aeva is a plaintiff, Aeva’s defense of intellectual property rights claims brought against it or its customers, suppliers and channel partners, with or without merit, could be time-consuming, expensive to litigate or settle, divert management resources and attention and force Aeva to acquire intellectual property rights and licenses, which may involve substantial royalty or other payments and may not be available on acceptable terms or at all. Further, a party making such a claim, if successful, could secure a judgment that requires Aeva to pay substantial damages or obtain an injunction and also Aeva may lose the opportunity to license its technology to others or to collect royalty payments. An adverse determination also could invalidate or narrow Aeva’s intellectual property rights and adversely affect its ability to offer its products to its customers and may require that Aeva procure or develop substitute products that do not infringe, which could require significant effort and expense. Any of these events could adversely affect Aeva’s business, reputation, operating results, financial condition and prospects.

Aeva’s intellectual property applications, including patent applications, may not be approved or granted or may take longer than expected to result in approval or grant, which may have a material adverse effect on Aeva’s ability to prevent others from commercially exploiting products similar to Aeva’s.

Aeva cannot be certain that it is the first inventor of the subject matter to which it has filed a particular patent application, or if it is the first party to file such a patent application. If another party has filed a patent application to the same subject matter as Aeva has, Aeva may not be entitled to the protection sought by the patent application. Aeva also cannot be certain whether the claims included in a patent application will ultimately be allowed in the applicable issued patent or the timing of any approval or grant of a patent application. Further, the scope of protection of issued patent claims is often difficult to determine. As a result, Aeva cannot be certain that the patent applications that it files will issue, or that its issued patents will afford protection against competitors with similar technology. In addition, Aeva’s competitors may design around Aeva’s registered or issued intellectual property, which may adversely affect Aeva’s business, prospects, financial condition and operating results.

40

In addition to patented technology, Aeva relies on its unpatented proprietary technology, trade secrets, designs, experiences, workflows, data, processes, software and know-how.

Aeva relies on proprietary information (such as trade secrets, designs, experiences, workflows, data, know-how and confidential information) to protect intellectual property that may not be patentable or subject to copyright, trademark, trade dress or service mark protection, or that Aeva believes is best protected by means that do not require public disclosure. Aeva generally seeks to protect this proprietary information by entering into confidentiality agreements, or consulting, services or employment agreements that contain non-disclosure and non-use provisions with its employees, consultants, contractors and third parties. However, Aeva may fail to enter into the necessary agreements, and even if entered into, these agreements may be breached or may otherwise fail to prevent disclosure, third-party infringement or misappropriation of its proprietary information, may be limited as to their term and may not provide an adequate remedy in the event of unauthorized disclosure or use of proprietary information. Aeva has limited control over the protection of trade secrets used by its current or future manufacturing counterparties and suppliers and could lose future trade secret protection if any unauthorized disclosure of such information occurs. In addition, Aeva’s proprietary information may otherwise become known or be independently developed by its competitors or other third parties. To the extent that its employees, consultants, contractors, advisors and other third parties use intellectual property owned by others in their work for Aeva, disputes may arise as to the rights in related or resulting know-how and inventions. Costly and time-consuming litigation could be necessary to enforce and determine the scope of Aeva’s proprietary rights, and failure to obtain or maintain protection for its proprietary information could adversely affect its competitive business position. Furthermore, laws regarding trade secret rights in certain markets where Aeva operates may afford little or no protection to its trade secrets.

Aeva also relies on physical and electronic security measures to protect its proprietary information, but it cannot provide assurance that these security measures will not be breached or provide adequate protection for its property. There is a risk that third parties may obtain and improperly utilize Aeva’s proprietary information to its competitive disadvantage. Aeva may not be able to detect or prevent the unauthorized use of such information or take appropriate and timely steps to enforce its intellectual property rights.

Aeva may be subject to damages resulting from claims that it or its current or former employees have wrongfully used or disclosed alleged trade secrets of its current or former employees’ former employers. Aeva may be subject to damages if its current or former employees wrongfully use or disclose Aeva’s trade secrets.

Aeva may be subject to claims that it or its current or former employees have inadvertently or otherwise used or disclosed trade secrets or other proprietary information of a current or former employee’s former employers. Litigation may be necessary to defend against these claims. If Aeva fails in defending such claims, in addition to paying monetary damages, it may lose valuable intellectual property rights or personnel. A loss of key personnel or their work product could hamper or prevent Aeva’s ability to commercialize its products, which could severely harm its business. Even if Aeva is successful in defending against these claims, litigation could result in substantial costs and demand on management resources.

Risks Related to Being a Public Company

The Company is incurring, and will continue to incur, significant increased expenses and administrative burdens as a public company, which could have an adverse effect on its business, financial condition and results of operations.

As a public company, the Company is facing, and will continue to face, increased legal, accounting, administrative and other costs and expenses as a public company that Aeva does not incur as a private company. The Sarbanes-Oxley Act, including the requirements of Section 404, as well as rules and regulations subsequently implemented by the SEC, the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 and the rules and regulations promulgated and to be promulgated thereunder, the PCAOB and the securities exchanges, impose additional reporting and other obligations on public companies. Compliance with public company requirements will increase costs and make certain activities more time-consuming. A number of those requirements mandate the Company to carry out activities Aeva has not done previously. In addition, expenses associated with SEC reporting requirements are being incurred. Furthermore, if any issues in complying with those requirements are identified (for example, if the auditor identify a material weakness or significant deficiency in the internal control over financial

41

reporting), the Company could incur additional costs rectifying those issues, and the existence of those issues could adversely affect the Company’s reputation or investor perceptions of it. It may also be more expensive to maintain director and officer liability insurance. Risks associated with the Company’s status as a public company may make it more difficult to attract and retain qualified persons to serve on the Board or as executive officers. The additional reporting and other obligations imposed by these rules and regulations will increase legal and financial compliance costs and the costs of related legal, accounting and administrative activities. These increased costs will require the Company to divert a significant amount of money that could otherwise be used to expand the business and achieve strategic objectives. Advocacy efforts by stockholders and third parties may also prompt additional changes in governance and reporting requirements, which could further increase costs.

The Company’s failure to effectively implement controls and procedures required by Section 404(a) and 404(b) of the Sarbanes-Oxley Act could have a material adverse effect on its business.

The Company is required to provide management’s attestation on internal controls. The standards required for a public company under Sections 404(a) and 404(b) of the Sarbanes-Oxley Act are significantly more stringent than those that were required of Aeva as a privately-held company. If the Company is not able to continue to adequately comply with the regulatory compliance and reporting requirements of Sections 404(a) and 404(b), it may be subject to adverse regulatory consequences that could harm investor confidence and the market price of its securities.

The Company’s ability to successfully operate the business will be largely dependent upon the efforts of certain key personnel of Aeva. The loss of such key personnel could negatively impact the operations and financial results of the combined business.

The Company’s ability to successfully operate the business is dependent upon the efforts of certain key personnel of Aeva. It is possible that Aeva will lose some key personnel, the loss of which could negatively impact the operations and profitability of the Company. Furthermore, certain of the key personnel of Aeva may be unfamiliar with the requirements of operating a company regulated by the SEC, which could cause the Company to have to expend time and resources helping them become familiar with such requirements.

Aeva’s management team has limited experience managing and operating a public company.

Most of the members of Aeva’s management team have limited experience managing and operating a publicly traded company, interacting with public company investors, and complying with the increasingly complex laws pertaining to public companies. Aeva’s management team may not successfully or efficiently manage their new roles and responsibilities. Aeva’s transition to being a public company subjects it to significant regulatory oversight and reporting obligations under the federal securities laws and the continuous scrutiny of securities analysts and investors. These new obligations and constituents will require significant attention from Aeva’s senior management and could divert their attention away from the day-to-day management of Aeva’s business. Aeva may not have adequate personnel with the appropriate level of knowledge, experience, and training in the accounting policies, practices or internal controls over financial reporting required of public companies. The development and implementation of the standards and controls necessary for the Company to achieve the level of accounting standards required of a public company may require costs greater than expected. It is possible that the Company will be required to expand its employee base and hire additional employees to support its operations as a public company which will increase its operating costs in future periods. These factors could adversely affect the Company's business, financial condition, and operating results.

The Company may be subject to securities litigation, which is expensive and could divert management attention.

The Company’s share price may be volatile and, in the past, companies that have experienced volatility in the market price of their stock have been subject to securities litigation, including class action litigation. The Company has been and may be the target of this type of litigation in the future. For example, on December 23, 2020, an alleged stockholder of the Company filed a lawsuit against the Company alleging that InterPrivate’s directors caused materially misleading and incomplete information to be disseminated to public stockholders and that InetrPrivate and the other named parties aided and abetted the directors’ breach of their fiduciary duties. In addition, on January 20, 2021, an alleged stockholder of the Company filed a lawsuit alleging InterPrivate’s directors authorized the filing of a materially incomplete and misleading registration statement on Form S-4 with the SEC in violation of

42

Sections 14(a) and 20(a) of the Exchange Act and in breach of the directors’ duty of disclosure. Litigation of this type could result in substantial costs and diversion of management’s attention and resources, which could have a material adverse effect on the Company’s business, financial condition, and results of operations. Any adverse determination in litigation could also subject the Company to significant liabilities.

Risks Related to Our Common Stock

If the Company does not meet the expectations of investors or securities analysts, the market price of the Company’s securities may decline.

If Company does not meet the expectations of investors or securities analysts, the market price of the Company’s securities may decline. In addition, fluctuations in the price of the Company’s securities could contribute to the loss of all or part of your investment. Prior to the Business Combination, there has not been a public market for Aeva capital stock. Accordingly, the valuation ascribed to Aeva may not be indicative of the price that will prevail in the trading market following the Business Combination. If an active market for the Company’s securities develops and continues, the trading price of the Company’s securities could be volatile and subject to wide fluctuations in response to various factors, some of which are beyond the Company’s control. Any of the factors listed below could have a material adverse effect on your investment in the Company’s securities and the Company’s securities may trade at prices significantly below the price you paid for them. In such circumstances, the trading price of the Company’s securities may not recover and may experience a further decline. Factors affecting the trading price of the Company’s securities may include:

Broad market and industry factors may materially harm the market price of the Company’s securities irrespective of the Company’s operating performance. The stock market in general, and the NYSE in particular, have experienced price and volume fluctuations that have often been unrelated or disproportionate to the operating

43

performance of the particular companies affected. The trading prices and valuations of these stocks, and of the Company’s securities, may not be predictable. A loss of investor confidence in the market for retail stocks or the stocks of other companies which investors perceive to be similar to the Company could depress the Company’s share price regardless of the Company’s business, prospects, financial conditions or results of operations. A decline in the market price of the Company’s securities also could adversely affect the Company’s ability to issue additional securities and the Company’s ability to obtain additional financing in the future.

The market price and trading volume of our common stock may fluctuate widely.

The market price of our common stock may fluctuate significantly, depending upon many factors, some of which may be beyond our control, including:

Future issuances of common stock by us may cause the market price of our common stock to decline.

Sales of a substantial number of shares of our common stock in the public market, or the perception that these sales could occur, could substantially decrease the market price of our common stock.

Your ownership in our common stock may be diluted by additional equity issuances.

Your percentage ownership in our common stock could be diluted in the future as a result of equity issuances for acquisitions, capital market transactions or otherwise, including any equity awards that we grant to our directors, officers and employees. Such awards could have a dilutive effect on our earnings per share, which could adversely affect the market price of our common stock. In addition, our certificate of incorporation authorizes us to issue, without the approval of our stockholders, one or more classes or series of preferred shares having such designation, powers, preferences and relative, participating, optional and other special rights as our board of directors generally may determine. The terms of one or more classes or series of preferred shares could dilute the voting power or reduce the value of our common stock.

There can be no assurance that we will be able to comply with the continued listing standards of the NYSE.

If the NYSE delists the Company’s shares from trading on its exchange for failure to meet the listing standards, the Company and its stockholders could face significant material adverse consequences including:

44

Our second amended and restated certificate of incorporation contains anti-takeover provisions that could adversely affect the rights of our stockholders.

Our second amended and restated certificate of incorporation contains provisions to limit the ability of others to acquire control of the Company or cause it to engage in change-of-control transactions, including, among other things:

These provisions could have the effect of depriving our stockholders of an opportunity to sell their Common Stock at a premium over prevailing market prices by discouraging third parties from seeking to obtain control of our company in a tender offer or similar transaction. With its staggered board of directors, at least two annual or special meetings of stockholders will generally be required in order to effect a change in a majority of its directors. Our staggered board of directors can discourage proxy contests for the election of its directors and purchases of substantial blocks of its shares by making it more difficult for a potential acquirer to gain control of its board of directors in a relatively short period of time.

Our second amended and restated certificate of incorporation provides, subject to limited exceptions, that the Court of Chancery of the State of Delaware will be the sole and exclusive forum for certain stockholder litigation matters, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us or our directors, officers, employees or stockholders.

Our second amended and restated certificate of incorporation requires, to the fullest extent permitted by law, that (i) derivative actions brought in our name, (ii) asserting a claim of breach of fiduciary duty owed by any director, officer or stockholder of the Company, (iii) actions asserting a claim pursuant to the DGCL, the Certificate of Incorporation and the bylaws of the Company, or (iv) any actions asserting claims governed by the internal affairs doctrine, may be brought only in the Court of Chancery in the State of Delaware (or, in the event that the Chancery Court does not have jurisdiction, the federal district court for the District of Delaware or other state courts of the State of Delaware). Subject to the preceding sentence, the federal district courts of the United States of America will be the exclusive forum for the resolution of any complaint asserting a cause of action arising under the Securities Act. However, such forum selection provisions will not apply to suits brought to enforce any liability or duty created by the Exchange Act or any other claim for which the federal courts of the United States have exclusive jurisdiction.

The choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or our directors, officers, or other employees, which may discourage such lawsuits against us and our directors, officers, and other employees. Alternatively, if a court were to find the choice of forum provision contained in the second amended and restated certificate of incorporation to be inapplicable or

45

unenforceable in an action, we may incur additional costs associated with resolving such action in other jurisdictions, which could harm our business, results of operations, and financial condition.

Additionally, Section 22 of the Securities Act creates concurrent jurisdiction for federal and state courts overall suits brought to enforce any duty or liability created by the Securities Act or the rules and regulations thereunder. As noted above, the second amended and restated certificate of incorporation will provide that the federal district courts of the United States of America will have jurisdiction over any action arising under the Securities Act. Accordingly, there is uncertainty as to whether a court would enforce such provision. Our stockholders will not be deemed to have waived our compliance with the federal securities laws and the rules and regulations thereunder.

Any person or entity purchasing or otherwise acquiring any interest in shares of our capital stock shall be deemed to have notice of and consented to the forum provisions in our second amended and restated certificate of incorporation.

Because we have no current plans to pay cash dividends on our Common Stock for the foreseeable future, you may not receive any return on investment unless you sell the Common Stock for a price greater than that which you paid for it.

We may retain future earnings, if any, for future operations, expansion and debt repayment and have no current plans to pay any cash dividends for the foreseeable future. Any decision to declare and pay dividends as a public company in the future will be made at the discretion of our Board and will depend on, among other things, our results of operations, financial condition, cash requirements, contractual restrictions and other factors that our board of directors may deem relevant. In addition, our ability to pay dividends may be limited by covenants of any existing and future outstanding indebtedness we or our subsidiaries incur. As a result, you may not receive any return on an investment in our Common Stock unless you sell the Common Stock for a price greater than that which you paid for it. See the section entitled “Market Price and Dividend Information.”

General Risk Factors

Aeva’s business could be materially and adversely affected by the current global COVID-19 pandemic or other health epidemics and outbreaks.

The ongoing COVID-19 pandemic and the emergence or re-emergence of variants, including Delta and Omicron, as well as other possible health epidemics and outbreaks could result in a material adverse impact on Aeva’s or its customers’ business operations including reduction or suspension of operations in the United States or certain parts of the world. Aeva’s engineering and manufacturing operations, among others, cannot all be conducted in a remote working structure and often require on-site access to materials and equipment. Aeva has customers with international operations in varying industries. It also depends on suppliers and manufacturers worldwide. Depending upon the duration of the ongoing COVID-19 pandemic and the associated business interruptions, its customers, suppliers and manufacturers may suspend or delay their engagement with Aeva, which could result in a material adverse effect on its financial condition. Recently, the COVID-19 pandemic has contributed to worldwide supply chain disruptions across multiple industries. Aeva’s response to the ongoing COVID-19 pandemic may prove to be inadequate and it may be unable to continue its operations in the manner it had prior to the outbreak, and may endure interruptions, reputational harm, delays in its product development and shipments, all of which could have an adverse effect on its business, operating results, and financial condition. To date, the COVID-19 pandemic, and our response to it, has not caused significant disruption in our business, but further public safety measures taken in response to a future outbreak or further supply chain disruptions could cause a disruption to our business and could have a material adverse effect on our results of operations. In addition, the COVID-19 pandemic has caused increased periodic volatility in financial markets and the economy as a whole, and any future volatility, whether as a result of the COVID-19 pandemic or otherwise, could have a material adverse effect on our results of operations. When the pandemic subsides, Aeva cannot assure you as to whether the periodic economic volatility that has resulted in part due to the COVID-19 pandemic will subside with it, which could continue to have a material adverse effect on its target markets and its business.

46

Aeva’s business is subject to the risks of earthquakes, fires, floods and other natural catastrophic events, global pandemics and interruptions by man-made problems, such as terrorism. Material disruptions of Aeva’s business or information systems resulting from these events could adversely affect its operating results.

A significant natural disaster, such as an earthquake, fire, flood, hurricane or significant power outage or other similar events, such as infectious disease outbreaks or pandemic events, including the ongoing COVID-19 pandemic, could have an adverse effect on Aeva’s business and operating results. The ongoing COVID-19 pandemic may have the effect of heightening many of the other risks described in this “Risk Factors” section, such as the demand for Aeva’s products, its ability to achieve or maintain profitability and its ability to raise additional capital in the future. Aeva’s corporate headquarters and R&D and current manufacturing and assembly base are located in the San Francisco Bay Area, which currently has a high number of COVID-19 pandemic cases and is a region known for seismic activity. In addition, natural disasters, acts of terrorism or war could cause disruptions in Aeva’s remaining manufacturing operations, Aeva’s or its customers’ or channel partners’ businesses, Aeva’s suppliers’ or the economy as a whole. Aeva also relies on information technology systems to communicate among its workforce and with third parties. Any disruption to Aeva’s communications, whether caused by a natural disaster or by manmade problems, such as power disruptions, could adversely affect its business. Aeva does not have a formal disaster recovery plan or policy in place and does not currently require that its suppliers’ partners have such plans or policies in place. To the extent that any such disruptions result in delays or cancellations of orders or impede its suppliers’ ability to timely deliver product components, or the deployment of its products, Aeva’s business, operating results and financial condition would be adversely affected.

Interruption or failure of Aeva’s information technology and communications systems could impact Aeva’s ability to effectively provide its products and services.

Aeva plans to include services and functionality that utilize data connectivity to monitor performance and timely capture opportunities to enhance performance and functionality. The availability and effectiveness of Aeva’s services depend on the continued operation of information technology and communications systems. Aeva’s systems will be vulnerable to damage or interruption from, among others, physical theft, fire, terrorist attacks, natural disasters, power loss, war, telecommunications failures, viruses, denial or degradation of service attacks, ransomware, social engineering schemes, insider theft or misuse or other attempts to harm Aeva’s systems. Aeva utilizes reputable third-party service providers or vendors for all of its data other than its source code, and these providers could also be vulnerable to harms similar to those that could damage Aeva’s systems, including sabotage and intentional acts of vandalism causing potential disruptions. Some of Aeva’s systems will not be fully redundant, and Aeva’s disaster recovery planning cannot account for all eventualities. Any problems with Aeva’s third-party cloud hosting providers could result in lengthy interruptions in Aeva’s business. In addition, Aeva’s services and functionality are highly technical and complex technology which may contain errors or vulnerabilities that could result in interruptions in Aeva’s business or the failure of its systems.

Aeva is subject to cybersecurity risks to operational systems, security systems, infrastructure, integrated software in its LiDAR products and customer data processed by Aeva or third-party vendors or suppliers and any material failure, weakness, interruption, cyber event, incident or breach of security could prevent Aeva from effectively operating its business.

Aeva is at risk for interruptions, outages and breaches of: operational systems, including business, financial, accounting, product development, data processing or production processes, owned by Aeva or its third-party vendors or suppliers; facility security systems, owned by Aeva or its third-party vendors or suppliers; in-product technology owned by Aeva or its third-party vendors or suppliers; the integrated software in Aeva’s products; or customer or driver data that Aeva processes or its third-party vendors or suppliers process on its behalf. Such cyber incidents could materially disrupt operational systems; result in loss of intellectual property, trade secrets or other proprietary or competitively sensitive information; compromise certain information of customers, employees, suppliers, drivers or others; jeopardize the security of Aeva’s facilities; or affect the performance of in-product technology and the integrated software in Aeva’s products. A cyber incident could be caused by disasters, insiders (through inadvertence or with malicious intent) or malicious third parties (including nation-states or nation-state supported actors) using sophisticated, targeted methods to circumvent firewalls, encryption and other security defenses, including hacking, fraud, trickery or other forms of deception. The techniques used by cyber attackers change frequently and may be difficult to detect for long periods of time. Although Aeva maintains information technology

47

measures designed to protect itself against intellectual property theft, data breaches and other cyber incidents, such measures will require updates and improvements, and Aeva cannot guarantee that such measures will be adequate to detect, prevent or mitigate cyber incidents. The implementation, maintenance, segregation and improvement of these systems requires significant management time, support and cost. Moreover, there are inherent risks associated with developing, improving, expanding and updating current systems, including the disruption of Aeva’s data management, procurement, production execution, finance, supply chain and sales and service processes. These risks may affect Aeva’s ability to manage its data and inventory, procure parts or supplies or produce, sell, deliver and service its products, adequately protect its intellectual property or achieve and maintain compliance with, or realize available benefits under, applicable laws, regulations and contracts. Aeva cannot be sure that the systems upon which it relies, including those of its third-party vendors or suppliers, will be effectively implemented, maintained or expanded as planned. If Aeva does not successfully implement, maintain or expand these systems as planned, its operations may be disrupted, its ability to accurately and timely report its financial results could be impaired, and deficiencies may arise in its internal control over financial reporting, which may impact Aeva’s ability to certify its financial results. Moreover, Aeva’s proprietary information or intellectual property could be compromised or misappropriated and its reputation may be adversely affected. If these systems do not operate as Aeva expects them to, Aeva may be required to expend significant resources to make corrections or find alternative sources for performing these functions.

A significant cyber incident could impact production capability, harm Aeva’s reputation, cause Aeva to breach its contracts with other parties or subject Aeva to regulatory actions or litigation, any of which could materially affect Aeva’s business, prospects, financial condition and operating results. In addition, Aeva’s insurance coverage for cyber-attacks may not be sufficient to cover all the losses it may experience as a result of a cyber incident.

Aeva may need to raise additional capital in the future in order to execute its business plan, which may not be available on terms acceptable to Aeva, or at all.

In the future, Aeva may require additional capital to respond to technological advancements, competitive dynamics or technologies, customer demands, business opportunities, challenges, acquisitions or unforeseen circumstances and it may determine to engage in equity or debt financings or enter into credit facilities for other reasons. In order to further business relationships with current or potential customers or partners, Aeva may issue equity or equity-linked securities to such current or potential customers or partners. Aeva may not be able to timely secure additional debt or equity financing on favorable terms, or at all. If Aeva raises additional funds through the issuance of equity or convertible debt or other equity-linked securities or if it issues equity or equity-linked securities to current or potential customers to further business relationships, its existing stockholders could experience significant dilution. Any debt financing obtained by Aeva in the future could involve restrictive covenants relating to its capital-raising activities and other financial and operational matters, which may make it more difficult for Aeva to obtain additional capital and to pursue business opportunities, including potential acquisitions. If Aeva is unable to obtain adequate financing or financing on terms satisfactory to Aeva, when Aeva requires it, Aeva’s ability to continue to grow or support its business and to respond to business challenges could be significantly limited.

If securities or industry analysts do not publish or cease publishing research or reports about the Company, its business, or its market, or if they change their recommendations regarding the Company’s securities adversely, the price and trading volume of the Company’s securities could decline.

The trading market for the Company’s securities depends, to some extent, on the research and reports that industry or securities analysts may publish about the Company, its business, market or competitors. If securities or industry analysts commence coverage of the Company and publish research reports that are interpreted negatively by the investment community, or have a negative tone regarding the Company’s business, financial condition, operating performance, industry, or end-markets, or downgrade the Company’s common stock, the Company’s share price and trading volume would likely be negatively impacted. If any of the analysts who may cover the Company change their recommendation regarding the Company’s price of common stock adversely, or provide more favorable relative recommendations about the Company’s competitors, the price of the Company’s shares of common stock would likely decline. If any analyst who may cover the Company were to cease coverage of the Company or fail to regularly publish reports on it, the Company could lose visibility in the financial markets, which in turn could cause its share price or trading volume to decline.

48

Item 1B. Unresolved Staff Comments.

Not applicable.

Item 2. Properties.

Our corporate headquarters is located in the San Francisco Bay Area, where we lease two buildings with approximately 28,000 and 30,000 of square feet, respectively, pursuant to a lease that expires in June 2023 and July 2025, respectively. Our headquarters contains engineering, research and development, assembly and administrative functions. Additionally, we lease approximately 96,000 square feet located in the San Francisco Bay Area for our testing facility. This lease expires in April 2026. We believe that our facilities are adequate for our current needs and, should we need additional space, we believe we will be able to obtain additional space on commercially reasonable terms.

Item 3. Legal Proceedings.

From time to time, the Company may be involved in actions, claims, suits and other proceedings in the ordinary course of business, including assertions by third parties relating to intellectual property infringement, breaches of contract or warranties or employment-related matters. When it is both probable that a liability has been incurred and the amount of the loss can be reasonably estimated, the Company records a liability for such loss contingencies. The Company’s estimates regarding potential losses and materiality are based on the Company’s judgment and assessment of the claims utilizing currently available information. Although the Company will continue to reassess its reserves and estimates based on future developments, the Company’s objective assessment of the legal merits of any such claims may not always be predictive of the outcome and actual results may vary from the Company’s current estimates.

Item 4. Mine Safety Disclosures.

Not applicable.

49

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market Information for Common Stock

The Company's common stock and warrants are traded on the New York Stock Exchange under the symbols “AEVA” and “AEVA.WS”, respectively.

Dividend Policy

We have never declared or paid, and do not anticipate declaring or paying in the foreseeable future, any cash dividends on our capital stock. Any future determination as to the declaration and payment of dividends, if any, will be at the discretion of our board of directors, subject to applicable laws and will depend on then existing conditions, including our financial condition, operating results, contractual restrictions, capital requirements, business prospects, and other factors our board of directors may deem relevant.

Stockholders

As of February 21, 2022, there were 44 holders of record of our common stock and 10 holders of record of our private and public warrants.

Securities Authorized for Issuance under Equity Compensation Plans

The information called for by this item is incorporated by reference to our Proxy Statement for the Annual Meeting of Stockholders to be held in 2022 (the “Proxy Statement”). See Part III, Item 12 “Security Ownership of Certain Beneficial Owners and Management” and “Equity Compensation Plan Information.”

Item 6. [Reserved]

50

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

You should read the following discussion and analysis of our financial condition and results of operations together with the Consolidated Financial Statements and related notes that are included elsewhere in this report. This discussion contains forward-looking statements based upon current expectations that involve risks and uncertainties. . Our actual results may differ materially from those anticipated in these forward-looking statements as a result of various factors, including those set forth under “Risk Factors” or in other parts of this report.

A discussion and analysis regarding our financial condition, results of operations and cash flows for the year ended December 31, 2021 compared to the year ended December 31, 2020 is presented below. A discussion regarding our financial condition, results of operations and cash flows for the year ended December 31, 2020 compared to the year ended December 31, 2019 is included in the section “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in our Registration Statement on Form S-1 filed with the SEC on June 6, 2021.

Overview

Our goal is to bring perception to all devices. Through our Frequency Modulated Continuous Wave (“FMCW”) sensing technology, we believe we are introducing the world’s first 4D LiDAR-on-chip that, along with our proprietary software applications, enables the adoption of LIDAR across broad applications. We believe that our solutions will allow for the wide-scale adoption of autonomous driving. Furthermore, we believe that our proprietary 4D LiDAR technology has the potential to enable new categories for perception across consumer electronics, consumer health, industrial automation and security applications.

Founded in 2017 by former Apple engineers Soroush Salehian and Mina Rezk and led by a multidisciplinary team of engineers and operators experienced in the field of sensing and perception, Aeva’s mission is to bring the next wave of perception technology to broad applications from automated driving to consumer electronics, consumer health, industrial automation and security. Our 4D LiDAR-on-chip combines silicon photonics technology that is proven in the telecom industry with precise instant velocity measurements and long-range performance for commercialization.

On March 12, 2021, Aeva, Inc. consummated a business combination (the “Business Combination”) with InterPrivate Acquisition Corp. (the Company’s predecessor, which was originally incorporated in Delaware as a special purpose acquisition company (“IPV”)) pursuant to the Business Combination Agreement dated as of November 2, 2020 (the “BCA”), by and among IPV, WLLY Merger Sub Corp., a wholly owned subsidiary of IPV, and Aeva, Inc. Immediately upon the consummation of the Business Combination, WLLY Merger Sub Corp. merged with and into Aeva, Inc., with Aeva, Inc. surviving the merger as a wholly owned subsidiary of IPV. IPV changed its name to Aeva Technologies, Inc. and the pre-combination Aeva retained its name of Aeva, Inc.

As a development stage company, we work closely with our customers on the development and commercialization of their programs and the utilization of our products in such programs. Thus far, our customers have purchased prototype products and engineering services from us for use in their research and development programs. We are expanding our manufacturing capacity through third-party manufacturers to meet our customers’ anticipated demand for the production of our products.

Unlike legacy 3D LiDAR, which relies on Time-of-Flight (“ToF”) technology and measures only depth and reflectivity, Aeva’s solution leverages a proprietary FMCW technology to measure velocity in addition to depth, reflectivity and inertial motion. We believe the ability of Aeva’s solution to measure instant velocity for every pixel is a major advantage over ToF-based sensing solutions. Furthermore, Aeva’s technology is free from interference from other LiDAR or the beams and sunlight, and our core innovations within FMCW are intended to enable autonomous vehicles to see at significantly higher distances of up to 500 meters.

We believe Aeva is uniquely positioned to provide a superior solution to enable autonomous driving at scale. Furthermore, we believe the advantages of our 4D LiDAR-on-chip allow us to provide the first LiDAR solution that is fully integrated onto a chip with superior performance at scale, with the potential to drive new categories of perception across industrial automation, consumer electronics, consumer health, and security markets.

51

Business Combination and Public Company Costs

The Business Combination was accounted for as a reverse recapitalization, in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”). Under this method of accounting, IPV was treated as the legal acquirer and accounting acquiree. Accordingly, the business combination was treated as the equivalent of Aeva, Inc, issuing stock for the net assets of IPV, accompanied by a recapitalization. The most significant change in the Company’s financial position and results of the business combination was an increase in cash of $513.1 million. Total non-recurring transaction costs incurred for this transaction were $47.7 million.

Upon the closing of the Business Combination, the Company's common stock and warrants began trading under the ticker symbols “AEVA” and “AEVA.WS” on the NYSE. We anticipate that we will continue to hire additional personnel and implement procedures and processes to address public company regulatory requirements and customary practices. We have incurred and expect to incur additional annual expenses as a public company for, among other things, directors’ and officers’ liability insurance, director fees and additional internal and external accounting and legal and administrative resources, including increased audit and legal fees.

COVID-19 Impact

The extent of the impact of the pandemic related to the novel coronavirus (“COVID-19”) on Aeva’s operational and financial performance will depend on various future developments, including the duration and spread of the outbreak and impact on its customers, suppliers, and employees, all of which is uncertain at this time. Aeva expects the COVID-19 pandemic to adversely impact revenue and results of operations, but Aeva is unable to predict at this time the size and duration of this adverse impact. Aeva is observing a larger trend of automakers shifting course in “make vs buy” decisions as it relates to autonomous solutions and software systems. As cash flows tighten, more automakers are looking to limit the potentially massive investments required to develop autonomous software and systems for which they may not necessarily have substantial expertise. As a result, automakers may be more open to and accepting of a model to incorporate full-stack hardware and software solutions from suppliers, which for autonomy is particularly relevant for Aeva. For more information on Aeva’s operations and risks related to health epidemics, including the COVID-19 pandemic, please see the section of this Annual Report on Form 10-K entitled “Risk Factors.”

Key Factors Affecting Aeva’s Operating Results

Aeva believes that its future performance and success depends to a substantial extent on its ability to capitalize on the following opportunities, which in turn is subject to significant risks and challenges, including those discussed below and in the section of this Annual Report on Form 10-K entitled “Risk Factors.”

Pricing, Product Cost and Margins. Our pricing and margins will depend on the volumes and the features as well as specific market applications of the solutions we provide to our customers. We have customers with technologies in various stages of development across different market segments. We anticipate that our prices will vary by market and application due to market-specific product and commercial requirements, supply and demand dynamics and product lifecycles.

Aeva's future performance will depend on its ability to deliver on economies of scale with lower product costs to enable industry adoption. Aeva believes its business model is positioned for scalability due to the ability to leverage the same product platform across markets and customer base, relationships with leading foundries and contract manufacturers. Our customers will require that our perception solutions be manufactured and sold at per-unit prices that are affordable. Our ability to compete in key markets will depend on the success of our efforts to efficiently and reliably produce cost-effective perception solutions that are competitively priced and affordable for our commercial-stage customers.

Additionally, the macroeconomic conditions in the industry, the growing emergence of competition in advanced assisted driving sensing and software technologies globally can negatively impact pricing, margins and market share. If Aeva does not generate the margins it expects upon commercialization of its perception solutions, Aeva may be required to raise additional debt or equity capital, which may not be available or may only be available on terms that are onerous to Aeva’s stockholders.

52

Commercialization of LiDAR-based Applications. We expect that our results of operations, including revenue and gross margins, will fluctuate on a quarterly basis for the foreseeable future as our customers continue on research and development projects and begin to commercialize autonomous solutions that rely on LiDAR technology. As more customers reach the commercialization phase and as the market for LiDAR solutions matures, these fluctuations in our operating results may become less pronounced.

Sales Volume. Each product program will have an expected range of sales volumes, depending on the end market demand for our customers’ products as well as market application. This can depend on several factors, including market penetration, product capabilities, size of the end market that the product addresses and our end customers’ ability to sell their products. In addition to end market demand, sales volumes also depend on whether our customer is in the development or production phase. In certain cases, we may provide volume discounts or strategic customer pricing on sales of our solutions, which may or may not be offset by lower manufacturing costs related to higher volumes which in turn could adversely impact our gross margins. Aeva’s ability to ultimately achieve profitability is dependent upon progression of existing relationships to production and our ability to meet required volumes and required cost targets and gross margins. Delays of our current and future customers’ programs could result in Aeva being unable to achieve its revenue targets and profitability in the time frame it anticipates.

Basis of Presentation

Aeva currently conducts its business through one operating segment.

Components of Results of Operations

Revenue

Revenue consists of sales of perception solutions (sensing systems) and non-recurring engineering services.

Aeva is engaged in design, manufacturing and sale of LiDAR sensing systems and related perception and autonomy-enabling software solutions serving customers in automotive and other markets. Under the customer agreements, Aeva delivers a specified number of sensing systems at a fixed price under customary terms and conditions. The sensing system units sold under these agreements are typically prototypes that are used by the customer for its research, development, evaluation, pilot, or testing purposes. Aeva also enters into non-recurring engineering service arrangements with certain of its customers to customize Aeva’s perception solution to meet customer specific requirements. Revenue from such services is recognized as professional services in the consolidated statement of operations.

Cost of revenue and gross profit

Cost of revenue principally includes direct material, direct labor and allocation of overhead associated with manufacturing operations, including inbound freight charges and depreciation expense. Cost of revenue also includes the direct cost and appropriate allocation of overhead involved in execution of non-recurring engineering services. Aeva’s gross profit equals total revenue less total cost of revenue.

Operating expenses

Research and development

Aeva’s research and development efforts are focused on enhancing and developing additional functionality for its existing products and on new product development. Research and development expenses consist primarily of:

53

Aeva expenses research and development costs as incurred. Aeva expects its research and development costs to increase for the foreseeable future as it continues to invest in research and development activities to achieve its product roadmap.

General and administrative expenses

General and administrative expenses consist of personnel and personnel-related expenses, including stock-based compensation of Aeva’s executive, finance, and information systems functions, as well as legal and accounting fees for professional and contract services. Aeva expects its general and administrative expenses to increase for the foreseeable future as it scales headcount with the growth of its business, and as a result of operating as a public company, including compliance with the rules and regulations of the Securities and Exchange Commission (the “SEC”), legal, audit, additional insurance expenses, investor relations activities, and other administrative and professional services.

Selling and marketing expenses

Selling and marketing expenses consist of personnel and personnel-related expenses, including stock-based compensation of Aeva’s business development team as well as advertising and marketing expenses. These include the cost of trade shows, promotional materials, public relations, an allocated portion of facilities and depreciation. Aeva expects to increase its sales and marketing activities and expand customer relationships. Aeva also expects that its sales and marketing expenses will increase over time as it continues to grow its sales force and increase marketing efforts.

Interest income and Interest expense

Interest income consists primarily of income earned on Aeva’s cash equivalents and investments in marketable securities. Interest income will vary based on Aeva’s cash equivalents and marketable securities balance and changes in the interest rates.

Other income and expense

Other income and expense primarily consist of changes in the fair value of private placement warrants, foreign currency conversion gains and losses, and realized gain/loss on marketable securities.

54

Results of Operations

Comparison of Year Ended December 31, 2021 and 2020

The following table sets forth Aeva’s results of operations data for the periods presented:

Revenue

Product

Product revenue increased by $0.2 million, or 16%, to $1.8 million during the year ended December 31, 2021, from $1.5 million for the year ended December 31, 2020. This increase was primarily due higher number of prototype units sold in 2021 as compared to 2020.

Professional Service

Professional services revenue increased by $4.2 million, or 126%, to $7.5 million for the year ended December 31, 2021, from $3.3 million for the year ended December 31, 2020. This increase was primarily due to an increase in activities related to research and development programs.

Cost of revenue and gross profit

Cost of product revenues increased by $0.6 million, or 90%, to $1.4 million during the year ended December 31, 2021, from $0.7 million for the year ended December 31, 2020. However, gross profit as a percentage of revenue decreased to 23% during the year ended December 31, 2021, from 53% for the year ended December 31, 2020, the change was primarily due to a lower average selling price for the prototype units sold during 2021.

Cost of professional service revenues increased by $2.4 million, or 121%, to $4.5 million during the year ended December 31, 2021, from $2.0 million for the year ended December 31, 2020, primarily due to the higher employee costs related to professional services. However, gross profit as a percentage of revenue increased marginally to 40% during the year ended December 31, 2021, from 39% for the year ended December 31, 2020.

55

Operating expenses

Research and development

Total research and development expense increased by $54.3 million, or 265%, to $74.8 million during the year ended December 31, 2021, from $20.5 million for the year ended December 31, 2020. Research and development expenses increased primarily due to an increase in material, software licenses and payroll expenses due to continued expansion for product development and head count increase. Material, software licenses, and service related expenses increased by $20.6 million, payroll expenses increased by $18.8 million, stock-based compensation expenses increased by $10.9 million, facility expenses increased by $1.8 million, consulting cost increased by $1.1 million, and equipment cost, depreciation and other employee costs increased by $1.1 million.

General and administrative

Total general and administrative expense increased by $22.7 million, or 402%, to $28.4 million during the year ended December 31, 2021, from $5.7 million for the year ended December 31, 2020. General and administrative expense increased primarily due to an increase in employee expenses as a result of increased headcount to support our growth and expansion. Payroll expenses increased by $5.7 million, stock-based compensation expenses increased by $6.2 million, professional fees increased by $5.3 million, insurance expenses increased by $3.5 million, other equipment and facility expenses increased by $1.0 million, recruiting and other employee expenses increased by $0.6 million, depreciation and amortization increase by $0.2 million and taxes paid increased by $0.2 million.

Selling and marketing

Total selling and marketing expense increased by $2.7 million, or 164%, to $4.4 million during the year ended December 31, 2021, from $1.7 million for the year ended December 31, 2020. Selling and marketing expense increased as we continue to grow our sales force and increase our marketing efforts. Marketing program cost increased by $1.2 million, payroll expenses increased by $0.9 million, stock-based compensation expenses increased by $0.3 million, recruiting and other employee expenses increased by $0.2 million and facility expense increase by $0.1 million.

Interest income

Interest income increased by $0.2 million during the year ended December 31, 2021. The increase is due to higher balance of cash and cash equivalent and marketable securities during the year ended December 31, 2021 as compared to December 31, 2020, partially offset by a decrease in interest rate yield in the current year as compared to last year.

Other income (expense), net

Other income (expense), net increased by $2.0 million during the year ended December 31, 2021, primarily due to decrease in the fair value of private placement warrant liability which was recorded as other income.

Liquidity and Capital Resources

Sources of Liquidity

Aeva’s capital requirements will depend on many factors, including sales volume, the timing and extent of spending to support research and development efforts, investments in information technology systems, the expansion of sales and marketing activities, and market adoption of new and enhanced products and features. As of December 31, 2021, Aeva had cash and cash equivalents and marketable securities totaling $445.0 million. Prior to the Business Combination, Aeva’s principal sources of liquidity have been proceeds received from the issuance of private equity.

Until Aeva can generate sufficient revenue from its sale of products to cover operating expenses, working capital and capital expenditures, Aeva expects the funds raised in the Business Combination, including the funds

56

from the PIPE financing, to fund its near term cash needs. Any additional equity securities issued may provide for rights, preferences or privileges senior to those of holders of the Company’s common stock. If Aeva raises funds by issuing debt securities, these debt securities would have rights, preferences and privileges senior to those of common stockholders. The terms of debt securities or borrowings could impose significant restrictions on Aeva’s operations. The credit market and financial services industry have in the past, and may in the future, experience periods of uncertainty and other risks detailed in Part I, Item 1A titled “Risk Factors” that could impact the availability and cost of equity and debt financing.

Aeva has incurred negative cash flows from operating activities and losses from operations in the past as reflected in its accumulated deficit of $163.0 million as of December 31, 2021. Aeva expects to continue to incur operating losses due to continued investments that it intends to make in its business, including development of products. Aeva believes that existing cash and cash equivalent and marketable securities will be sufficient to fund operating and capital expenditure requirements through at least 12 months from the date of issuance of these financial statements.

Cash Flow Summary

The following table summarizes our cash flows for the periods presented:

Operating Activities

Net cash used in operating activities during the year ended December 31, 2021 of $82.1 million, was attributable to a net loss of $101.9 million and a net change in our net operating assets and liabilities of $5.1 million, partially offset by non-cash charges of $24.9 million. Non-cash charges primarily consisted of $22.2 million in stock-based compensation, $1.1 million in depreciation and amortization expense, $1.9 million in amortization of right of use, $1.5 million in accretion of discount on available for sale securities, partially offset by $2.0 million change in the fair value of warrant liabilities. The change in net operating assets and liabilities was primarily due to a $7.3 million increase in other current assets, a $2.2 million increase in accounts receivable due to timing of billing and cash collections, a $0.8 million increase in inventory, a $0.8 million increase in other non-current assets, a $3.2 million increase in accrued liability, a $2.7 million increase in accounts payable resulting primarily from expansion in our operating activities and a $1.5 million increase in accrued employee cost, partially offset by a $1.8 million decrease in lease liability.

Net cash used in operating activities during the year ended December 31, 2020 of $21.2 million, was attributable to a net loss of $25.6 million and a net change in our net operating assets and liabilities of $0.3 million, partially offset by non-cash charges of $4.6 million. Non-cash charges primarily consisted of $3.8 million in stock-based compensation and $0.8 million in depreciation expense. The change in net operating assets and liabilities was primarily due to a $3.5 million increase in other current assets, a $0.9 million increase in inventory, a $2.3 million increase in accrued liability, a $1.4 million increase in accounts payable resulting primarily from expansion in our operating activities and a $0.3 million increase in accrued employee cost, this was partially offset by a $0.2 million decrease in accounts receivable.

Investing Activities

Net cash used in investing activities during the year ended December 31, 2021, was attributable to $571.9 million used to purchase marketable securities, $4.5 million used in connection with the asset acquisition and $3.9

57

million used to purchase property and equipment, partially offset by maturity and sale of available-for-sale investments of $191.7 million.

Net cash used in investing activities during year ended December 31, 2020, attributable to 0.9 million used to purchase property and equipment.

Financing Activities

Net cash provided by financing activities during the year ended December 31, 2021, was attributable to net proceeds of $513.3 million from the Business Combination and PIPE financing and proceeds of $0.9 million from stock option exercises, this was partially offset by $1.3 million paid for taxes withheld on restricted stock units.

Net cash provided by financing activities during year ended December 31, 2020, was attributable to proceeds from stock option exercise.

Off-Balance Sheet Arrangements

As of December 31, 2021, Aeva has not engaged in any off-balance sheet arrangements, as defined in the rules and regulations of the SEC.

Critical Accounting Policies and Estimates

Aeva prepares its financial statements in accordance with U.S. GAAP. The preparation of these financial statements requires us to make estimates, assumptions and judgments that can significantly impact the amounts Aeva reports as assets, liabilities, revenue, costs and expenses and the related disclosures. Aeva bases its estimates on historical experience and other assumptions that it believes are reasonable under the circumstances. Aeva’s actual results could differ significantly from these estimates under different assumptions and conditions. Aeva believes that the accounting policies discussed below are critical to understanding its historical and future performance as these policies involve a greater degree of judgment and complexity.

Stock-Based Compensation

Aeva recognizes the cost of stock-based awards granted to its employees and directors based on the estimated grant-date fair value of the awards. Cost is recognized on a straight-line basis over the service period, which is generally the vesting period of the award. Aeva elected to recognize the effect of forfeitures in the period they occur. The fair value of the RSUs is equal to the closing price of the Company’s common stock on the grant date. The fair value of each stock option grant was determined by the Company using the Black-Scholes option-pricing model, which is impacted by the following assumptions:

The grant date fair value of Aeva's common stock, prior to the closing of BCA was determined using valuation methodologies that utilize certain assumptions, including probability weighting of events, volatility, time to liquidation, a risk-free interest rate, and an assumption for a discount for lack of marketability (Level 3 inputs).

58

Subsequent to the closing of BCA the valuation of Aeva common stock was determined using the closing share price as reported on the NYSE.

Revenue

The most critical accounting policy estimate and judgments required in applying ASC 606, Revenue Recognition of Contracts from Customers, and our revenue recognition policy relate to the identification of performance obligations and accounting for certain contracts recognized over time. In certain contracts, the determination of our distinct performance obligations requires significant judgment. As our business and offerings to customers change over time, the products and services we determine to be distinct performance obligations may change. Such changes may adversely impact the amount of revenue and gross margin we report in a particular period. Revenue from product sales is recognized upon transfer of control of promised products. Revenue is recognized in an amount that reflects the consideration that Aeva expects to receive in exchange for those products and services. Product sales to certain customers may require customer acceptance, in which case revenue recognition is deferred until acceptance takes place. For service projects, revenue is recognized as services are performed and amounts are earned in accordance with the terms of contract at estimated collectible amounts.

For certain custom products that require engineering and development based on customer specifications, the Company recognizes revenue over time using a cost-to-cost measure of progress which the Company believes faithfully depicts the transfer of control of the goods or services to the customer. Amounts billed to customers for shipping and handling are included in revenue. Some of the Company’s arrangements provide software embedded in hardware, and promises to update the Company’s software represent immaterial promises in contracts with customers. Taxes collected from customers and remitted to governmental authorities are excluded from revenue.

Changes in judgments with respect to these assumptions and estimates could impact the timing or amount of revenue recognition.

Recent Accounting Pronouncements

See “Note 1. Description of Business and Summary of Significant Accounting Policies” of the Notes to Consolidated Financial Statements in “Item 8. Financial Statements and Supplementary Data” for a full description of recent accounting pronouncements including the respective expected dates of adoption and estimated effects, if any, on our Consolidated Financial Statements.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

Aeva is exposed to market risk in the ordinary course of our business. Market risk represents the risk of loss that may impact our financial position due to adverse changes in financial market prices and rates. Our market risk exposure is primarily a result of fluctuations in interest rates.

Interest rate risk

We maintain an investment portfolio of various holdings, types, and maturities. These securities are generally classified as available for sale and consequently, are recorded on the balance sheet at fair value with unrealized gains and losses reported as a separate component of accumulated other comprehensive loss. At any time, a sharp rise in interest rates could have a material adverse impact on the fair value of our investment portfolio. Conversely, declines in interest rates could have a material positive impact on interest earnings for our portfolio. We do not currently hedge these interest rate exposures.

59

The following table presents the hypothetical change in fair values in the financial instruments we held at December 31, 2021 that are sensitive to changes in interest rates. The modeling technique used measures the change in fair values arising from selected potential changes in interest rates on our investment portfolio, which had a fair value of $412.3 million at December 31, 2021. Market changes reflect immediate hypothetical parallel shifts in the yield curve of plus or minus 100 and 50 basis points (“BPS”).

Foreign Currency Exchange Risk

There was no material foreign currency risk for the year ended December 31, 2021.

60

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

61

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the shareholders and the Board of Directors of Aeva Technologies, Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Aeva Technologies, Inc. and subsidiaries (the "Company") as of December 31, 2021 and 2020, the related consolidated statements of operations, consolidated statements of convertible preferred stock and stockholders' equity (deficit), and consolidated statements of cash flows, for each of the three years in the period ended December 31, 2021, and the related notes (collectively referred to as the "financial statements"). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2021 and 2020, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2021, in conformity with accounting principles generally accepted in the United States of America.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of December 31, 2021, based on criteria established in Internal Control — Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated February 28, 2022, expressed, an unqualified opinion on the Company's internal control over financial reporting.

Change in Accounting Principle

As discussed in Note 1 to the financial statements, effective January 1, 2021, the Company adopted Accounting Standards Update (ASU) 2016-02, Leases (Topic 842).

Basis for Opinion

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matters

The critical audit matter communicated below is a matter arising from the current-period audit of the financial statements that was communicated or required to be communicated to the audit committee and that (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Revenue — Refer to Notes 1 and 3 to the financial statements

Critical Audit Matter Description

62

For certain custom products that require engineering and development based on customer specifications, the Company recognizes revenue over time using a cost-to-cost measure of progress which the Company believes faithfully depicts the transfer of control of the goods or services to the customer. Due to uncertainties inherent in the estimation process, estimates of hours and costs to complete a performance obligation may be revised. The Company reviews and updates its contract-related estimates for projected hours and costs regularly, and records adjustments as needed.

As judgements with respect to the forecasted hours and cost per hour could impact the timing or amount of revenue recognition, we identified the evaluation of the reasonableness of these assumptions and estimates as a critical audit matter. This required a high degree of auditor judgment and an increased extent of testing.

How the Critical Audit Matter Was Addressed in the Audit

Our audit procedures related to testing the forecasted hours and cost per hour estimates and assumptions included the following, among others:

For selected revenue arrangements we performed the following:

/s/ Deloitte & Touche LLP

San Jose, California

February 28, 2022

We have served as the Company's auditor since 2020.

63

AEVA TECHNOLOGIES, INC.

CONSOLIDATED BALANCE SHEET

(In thousands, except per share data)

The accompanying notes are an integral part of these consolidated financial statements.

64

AEVA TECHNOLOGIES, INC.

CONSOLIDATED STATEMENT OF OPERATIONS

(In thousands, except share and per share data)

The accompanying notes are an integral part of these consolidated financial statements.

65

AEVA TECHNOLOGIES, INC.

CONSOLIDATED STATEMENTS OF CONVERTIBLE PREFERRED STOCK AND STOCKHOLDERS’ EQUITY (DEFICIT)

(In thousands, except share data)