UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

Form 10-Q

Quarterly Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

For the quarterly period ended March 31, 2010

Commission File Number 0-04041

ALLIED MOTION TECHNOLOGIES INC.

Incorporated Under the Laws of the State of Colorado

Colorado		84-0518115
(State or other jurisdiction of incorporation or organization)		(I.R.S. Employer Identification No.)

23 Inverness Way East, Suite 150

Englewood, Colorado 80112

Telephone: (303) 799-8520

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past ninety (90) days. Yes x No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit and post such files). Yes o No o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer o		Accelerated filer o

Non-accelerated filer o (Do not check if a smaller reporting company)		Smaller reporting company x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No x

Number of Shares of the only class of Common Stock outstanding: 7,830,481 as of May 17, 2010

Table of Contents

ALLIED MOTION TECHNOLOGIES INC.

INDEX

			Page No.
PART I.	FINANCIAL INFORMATION

	Item 1.	Financial Statements

		Unaudited Condensed Consolidated Balance Sheets March 31, 2010 and December 31, 2009	1

		Unaudited Condensed Consolidated Statements of Operations For the three months ended March 31, 2010 and 2009	2

		Unaudited Condensed Consolidated Statements of Cash Flows For the three months ended March 31, 2010 and 2009	3

		Unaudited notes to Condensed Consolidated Financial Statements	4

	Item 2.	Management’s Discussion and Analysis of Financial Condition and Results Of Operations	9

	Item 3.	Quantitative and Qualitative Disclosures about Market Risk	15

	Item 4T.	Controls and Procedures	15

PART II.	OTHER INFORMATION

	Item 5.	Other Information	16

	Item 6.	Exhibits	17

Table of Contents

ALLIED MOTION TECHNOLOGIES INC.

CONDENSED CONSOLIDATED BALANCE SHEETS

(In Thousands, except per share data)

(Unaudited)

	March 31, 2010		December 31, 2009

Assets
Current Assets:
Cash and cash equivalents	$	5,311	$	4,470
Trade receivables, net of allowance for doubtful accounts of $208 and $225 at March 31, 2010 and December 31, 2009, respectively	8,988		7,743
Inventories, net	8,053		7,578
Deferred income taxes	496		476
Prepaid expenses and other	824		891
Total Current Assets	23,672		21,158
Property, plant and equipment, net	6,480		6,584
Deferred income taxes	5,564		5,649
Intangible assets, net	1,154		1,362
Total Assets	$	36,870	$	34,753

Liabilities and Stockholders’ Investment
Current Liabilities:
Debt obligations	322		600
Accounts payable	4,933		3,135
Accrued liabilities and other	3,419		3,298
Income taxes payable	307		104
Total Current Liabilities	8,981		7,137
Pension and post-retirement obligations	2,510		2,594
Total Liabilities	11,491		9,731

Commitments and Contingencies
Stockholders’ Investment:
Common stock, no par value, authorized 50,000 shares; 7,830 and 7,585 shares issued and outstanding at March 31, 2010 and December 31, 2009, respectively	18,707		18,581
Preferred stock, par value $1.00 per share, authorized 5,000 shares; no shares issued or outstanding	—		—
Retained earnings	6,491		5,757
Accumulated other comprehensive income	181		684
Total Stockholders’ Investment	25,379		25,022
Total Liabilities and Stockholders’ Investment	$	36,870	$	34,753

See accompanying notes to financial statements.

Table of Contents

ALLIED MOTION TECHNOLOGIES INC.

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

(In Thousands, except per share data)

(Unaudited)

	For the three months ended March 31,
	2010			2009
Revenues	$	17,422		$	15,295
Cost of products sold	13,017			12,506
Gross margin	4,405			2,789

Operating costs and expenses:
Selling	941			878
General and administrative	2,059			1,725
Engineering and development	1,013			995
Amortization of intangible assets	165			255
Fire related losses	—			56
Insurance recoveries	(685		)	(56		)
Total operating costs and expenses	3,493			3,853
Operating income (loss)	912			(1,064		)

Other income (expense), net:
Interest expense	(3		)	(15		)
Other income, net	155			19
Total other income, net	152			4
Income (loss) before income taxes	1,064			(1,060		)
(Provision) benefit for income taxes	(330		)	330

Net income (loss)	$	734		$	(730	)

Basic net income (loss) per share:
Net income (loss) per share	$	0.09		$	(0.10	)
Basic weighted average common shares	7,764			7,386

Diluted net income (loss) per share:
Net income (loss) per share	$	0.09		$	(0.10	)
Diluted weighted average common shares	7,768			7,386

See accompanying notes to financial statements.

Table of Contents

ALLIED MOTION TECHNOLOGIES INC.

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(In Thousands)

(Unaudited)

	For the three months ended March 31,
	2010			2009
Cash Flows From Operating Activities:
Net income (loss)	$	734		$	(730	)
Adjustments to reconcile net income (loss) to net cash used in operating activities:
Depreciation and amortization	496			893
Other	70			(215		)
Changes in assets and liabilities:
Trade receivables	(1,390		)	210
Inventories, net	(577		)	77
Prepaid expenses and other	113			(115		)
Accounts payable	1,887			(367		)
Accrued liabilities and other	289			(1,577		)
Net cash provided by (used in) operating activities	1,622			(1,824		)

Cash Flows From Investing Activities:
Purchase of property and equipment	(304		)	(241		)
Net cash used in investing activities	(304		)	(241		)

Cash Flows From Financing Activities:
Repayments on lines-of-credit, net	(278		)	—
Repayments on term loans	—			(200		)
Stock transactions under employee benefit stock plans	80			230
Net cash (used in) provided by financing activities	(198		)	30

Effect of foreign exchange rate changes on cash	(279		)	(43		)

Net increase (decrease) in cash and cash equivalents	841			(2,078		)

Cash and cash equivalents at beginning of period	4,470			4,196

Cash and cash equivalents at end of period	$	5,311		$	2,118

See accompanying notes to financial statements.

Table of Contents

ALLIED MOTION TECHNOLOGIES INC.

1. Basis of Preparation and Presentation

Allied Motion Technologies Inc. (the Company) is engaged in the business of designing, manufacturing and selling motion control products to a broad spectrum of customers throughout the world. The Company is organized into four technical units: Emoteq, Motor Products, Stature Electric and Premotec.

The accompanying unaudited condensed consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. All significant inter-company accounts and transactions have been eliminated in consolidation.

The assets and liabilities of the Company’s foreign subsidiaries are translated into U.S. dollars using exchange rates in effect at the balance sheet date. Revenues and expenses are translated at average rates prevailing during the month of the transaction. The resulting translation adjustments are included in the cumulative translation adjustment component of stockholders’ investment in the accompanying consolidated balance sheets. Transaction gains and losses that arise from exchange rate fluctuations on transactions denominated in a currency other than the functional currency are included in the results of operations as incurred.

The condensed consolidated financial statements included herein have been prepared by the Company pursuant to the rules and regulations of the Securities and Exchange Commission and include all adjustments which are, in the opinion of management, necessary for a fair presentation. Certain information and footnote disclosures normally included in financial statements which are prepared in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”) have been condensed or omitted pursuant to such rules and regulations. The Company believes that the disclosures herein are adequate to make the information presented not misleading. The financial data for the interim periods may not necessarily be indicative of results to be expected for the year.

The preparation of financial statements in accordance with U.S. GAAP requires management to make certain estimates and assumptions. Such estimates and assumptions affect the reported amounts of assets and liabilities as well as disclosure of contingent assets and liabilities at the date of the consolidated financial statements, and the reported amounts of revenue and expenses during the reporting period. Actual results could differ from those estimates.

It is suggested that the accompanying condensed interim financial statements be read in conjunction with the Consolidated Financial Statements and related Notes to such statements included in the Annual Report on Form 10-K for the year ended December 31, 2009 that was previously filed by the Company.

2. Inventories

Inventories, valued at the lower of cost (first-in, first-out basis) or market, are as follows (in thousands):

	March 31, 2010			December 31, 2009
Parts and raw materials	$	6,408		$	6,484
Work-in process	2,294			1,649
Finished goods	1,371			1,620
	10,073			9,753
Less reserves	(2,020		)	(2,175		)
Inventories, net	$	8,053		$	7,578

Table of Contents

3. Property, Plant and Equipment

Property, plant and equipment is classified as follows (in thousands):

	March 31, 2010			December 31, 2009
Land	$	290		$	290
Building and improvements	3,220			3,231
Machinery, equipment, tools and dies	11,653			11,806
Furniture, fixtures and other	1,775			1,543
	16,938			16,870
Less accumulated depreciation	(10,458		)	(10,286		)
Property, Plant and Equipment, net	$	6,480		$	6,584

4. Stock-Based Compensation

Stock Incentive Plans

The Company’s Stock Incentive Plans provide for the granting of stock awards, including stock options, stock appreciation rights and restricted stock, to employees and non-employees, including directors of the Company.

Stock Options

The following is a summary of option activity, during the quarter ended March 31, 2010:

	Number of Shares		Weighted Average Exercise Price		Weighted Average Remaining Contractual Term (years)	Aggregate Intrinsic Value
Outstanding at beginning of period	538,950		$	4.44	1.2
Forfeited	(4,000	)	$	4.87
Exercised	(45,000	)	$	1.77
Outstanding at end of Period	489,950		$	4.68	1.1	$	25,000

Exercisable at end of period	489,950		$	4.68	1.1	$	25,000

All stock options are fully vested, and the Company did not recognize any compensation expense relating to outstanding stock options during 2010 or 2009.

Stock Warrants

As of March 31, 2010, the Company had 300,000 warrants outstanding to purchase common stock that are exerciseable at an exercise price of $4.41. The warrants were issued May 10, 2004, in connection with an acquisition, and will expire May 10, 2011.

Restricted Stock

In the quarter ended March 31, 2010, 208,755 shares of unvested restricted stock were awarded with a weighted average value of $3.00. Of the restricted shares granted, 31,590 shares have performance based vesting conditions. The value at the date of award is amortized to

Table of Contents

compensation expense over the related service period of approximately three years. Shares of restricted stock are forfeited if an employee leaves the Company before the vesting date. Shares that are forfeited become available for future awards.

The following is a summary of restricted stock activity during the quarter ended March 31, 2010:

	Number of Shares
Outstanding at beginning of period	173,712
Granted	208,755
Forfeited	(700	)
Vested	(75,421	)
Outstanding at end of Period	306,346

For the quarter ended March 31, 2010 and 2009, compensation expense, net of forfeitures, of $108,000 and $87,000 was recorded, respectively.

5. Earnings per Share

Basic income per share is computed by dividing net income by the weighted average number of shares of common stock outstanding. Diluted income per share is determined by dividing the net income by the sum of (1) the weighted average number of common shares outstanding and (2) if not anti-dilutive, the effect of stock awards determined utilizing the treasury stock method. The dilutive effect of outstanding awards for the quarters ended March 31, 2010 and 2009 was 4,000 and 0 shares, respectively. Stock awards to purchase 790,000 and 803,000 shares of common stock were excluded from the calculation of diluted income per share for the quarters ended March 31, 2010 and 2009, respectively, since the results would have been anti-dilutive.

6. Segment Information

ASC Topic “Segment Reporting” requires disclosure of operating segments, which as defined, are components of an enterprise about which separate financial information is available that is evaluated regularly by the chief operating decision maker in deciding how to allocate resources and in assessing performance.

The Company operates in one segment for the manufacture and marketing of motion control products for original equipment manufacturers and end user applications. In accordance with the “Segment Reporting” Topic of the ASC, the Company’s chief operating decision maker has been identified as the Chief Executive Officer and President, which reviews operating results to make decisions about allocating resources and assessing performance for the entire Company. Existing guidance, which is based on a management approach to segment reporting, establishes requirements to report selected segment information quarterly and to report annually entity-wide disclosures about products and services, major customers, and the countries in which the entity holds material assets and reports revenue. All material operating units qualify for aggregation under “Segment Reporting” due to their similar customer base and similarities in: economic characteristics; nature of products and services; and procurement, manufacturing and distribution processes. Since the Company operates in one segment, all financial information required by “Segment Reporting” can be found in the accompanying consolidated financial statements and within this note.

Table of Contents

The Company’s wholly owned foreign subsidiary, Premotec, located in Dordrecht, The Netherlands is included in the accompanying consolidated financial statements. Financial information related to the foreign subsidiaries is summarized below (in thousands):

	As of and for the three months ended March 31,
	2010		2009

Revenues derived from foreign subsidiaries	$	5,928	$	4,590
Identifiable assets	$	11,246	$	11,206

Sales to customers outside of the United States by all subsidiaries were $7,510,000 and $6,410,000 during the quarters ended March 31, 2010 and 2009, respectively.

During the quarters ended March 31, 2010 and 2009, no single customer accounted for more than 10% of total revenues.

7. Comprehensive Income (Loss)

Comprehensive income (loss) is defined as the change in equity of a business enterprise during a period from transactions and other events and circumstances from non-owner sources. It includes all changes in equity during a period except those resulting from investments by and distributions to stockholders.

Comprehensive income (loss) is computed as follows (in thousands):

	For the three months ended March 31,
	2010			2009
Net income (loss)	$	734		$	(730	)
Foreign currency translation adjustment	(503		)	(486		)
Comprehensive income (loss)	$	231		$	(1,216	)

8. Intangible Assets

Intangible assets on the Company’s consolidated balance sheets consist of the following (in thousands):

	March 31, 2010		December 31, 2009		Estimated Life
Amortizable intangible assets
Customer lists	2,942		3,008		8 years
Trade name	946		946		10 years
Design and technologies	1,145		1,212		8 years
Patents	24		24
Accumulated amortization	(3,903	)	(3,828	)
Total intangible assets	1,154		1,362

Table of Contents

Amortization expense for intangible assets for the quarters ended March 31, 2010 and 2009 was $165,000 and $255,000, respectively.

9. Debt Obligations

Debt obligations consisted of the following (in thousands):

	March 31, 2010		December 31, 2009
Credit Agreement (at variable rates)
Revolving line-of-credit, 4.75% as of March 31, 2010	$	322	$	600

The Company’s amended Credit Agreement, which matures on July 31, 2010, provides revolving credit up to $8 million and €2 million. The amended Credit Agreement contains certain financial covenants related to achieving minimum EBITDA levels, maintaining minimum consolidated tangible net worth, and placing a ceiling on the amount of capital expenditures incurred by the Company. The Company was in compliance with all covenants at March 31, 2010.

The Company also has €300,000 of available borrowings under a bank overdraft facility in Europe.

10. Restructuring Reserves

As of March 31, 2010, the following amounts are included in “Accrued Liabilities and Other” in the Condensed Consolidated Balance Sheet, and are expected to be paid out primarily in the quarter ended June 30, 2010 (in thousands):

	As of March 31, 2010
Employee termination benefits	$	28
Office and Employee relocation	22
Consulting and Other	4
Total	54

No additional restructuring expenses were incurred in the quarter ended March 31, 2010.

11. Fire Loss and Insurance Recoveries

The Company received the final settlement for the business interruption losses caused by the fire at the COPI facility in October 2008, formerly located in Chatsworth, CA. Net insurance recoveries were $685,000 and $0, for the quarters ended March 31, 2010 and 2009, respectively. As a result of the settlement, no additional losses or recoveries are expected.

12. Reclassifications

Certain prior year balances were reclassified to conform to the current year presentation. Those reclassifications had no impact on net income, stockholders’ investment or cash flows from operations as previously reported.

Table of Contents

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

All statements contained herein that are not statements of historical fact constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements include, without limitation, any statement that may predict, forecast, indicate, or imply future results, performance, or achievements, and may contain the word “believe,” “anticipate,” “expect,” “project,” “intend,” “will continue,” “will likely result,” “should” or words or phrases of similar meaning. Forward-looking statements involve known and unknown risks and uncertainties that may cause actual results of the Company to differ materially from the forward-looking statements. The risks and uncertainties include those associated with the present economic circumstances in the United States and throughout Europe, general business and economic conditions in the Company’s motion markets, introduction of new technologies, products and competitors, the ability to protect the Company’s intellectual property, the ability of the Company to sustain, manage or forecast its growth and product acceptance, success of new corporation strategies and implementation of defined critical issues designed for growth and improvement in profits, the continued success of the Company’s customers to allow the Company to realize revenues from its order backlog and to support the Company’s expected delivery schedules, the continued viability of the Company’s customers and their ability to adapt to changing technology and product demand, the loss of significant customers or enforceability of the Company’s contracts in connection with a merger, acquisition, disposition, bankruptcy, or otherwise, the ability of the Company to meet the technical specifications of its customers, the continued availability of parts and components, increased competition and changes in competitor responses to the Company’s products and services, changes in government regulations, availability of financing, the ability of the Company’s lenders and financial institutions to provide additional funds if needed for operations or for making future acquisitions or the ability of the Company to obtain alternate financing if present sources of financing are terminated, the ability to attract and retain qualified personnel who can design new applications and products for the motion industry, the ability of the Company to identify and consummate favorable acquisitions to support external growth and new technology, the ability of the Company to establish low cost region manufacturing and component sourcing capabilities, and the ability of the Company to control costs, including relocation costs, for the purpose of improving profitability. The Company’s ability to compete in this market depends upon its capacity to anticipate the need for new products, and to continue to design and market those products to meet customers’ needs in a competitive world. Actual results, events and performance may differ materially. Readers are cautioned not to place undue reliance on these forward-looking statements as a prediction of actual results. The Company has no obligation or intent to release publicly any revisions to any forward looking statements, whether as a result of new information, future events, or otherwise.

New risk factors emerge from time to time and it is not possible for management to predict all such risk factors, nor can it assess the impact of all such risk factors on its business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements. The Company’s expectations, beliefs and projections are expressed in good faith and are believed to have a reasonable basis; however, the Company makes no assurance that expectations, beliefs or projections will be achieved.

Overview

Allied Motion is engaged in the business of designing, manufacturing and selling motor, servo motion and optical encoder products to a broad spectrum of customers throughout the world. Examples of the end products using Allied Motion’s technology in the medical and health care industries include wheel chairs, scooters, stair lifts, patient lifts, patient handling tables and beds, electric powered surgical hand pieces, programmable pumps to meter and administer infusions associated with chemotherapy, pain control and antibiotics; nuclear imaging systems, automated pharmacy dispensing equipment, kidney dialysis equipment, respiratory ventilators and heart pumps. In electronics, our products are used in the handling,

Table of Contents

inspection, and testing of components and in the automation and verification of final products such as PC’s, game equipment and cell phones. Our motors are used in the HVAC systems of trucks, buses, RV’s, boats and off-road construction/farming equipment. These motors operate a variety of actuation systems (e.g., lifts, slide-outs, covers etc.), they provide improved fuel efficiency while the vehicles are idling and are used in drive-by-wire applications to electrically replace or power-assist a variety of mechanical linkages. Our products are also utilized in high performance vehicles, vehicles using alternative fuel systems such as LPG, fuel cell and hybrid vehicles. Our geared motor products are utilized in commercial grade floor cleaners, polishers and material handling devices for factories and commercial buildings. Our products are also used in a variety of military/defense applications including inertial guided missiles, mid range munitions systems, weapons systems on armed personnel carriers and in security and access control in camera systems, door access control and in airport screening and scanning devices. Other end products utilizing our technology include high definition printers; tunable lasers and spectrum analyzers for the fiber optic industry; processing equipment for the semiconductor industry, as well as ticket and cash dispensing machines (ATM’s).

Allied Motion is organized into four companies, or technology units (“TUs”): Emoteq Corporation, Motor Products Corporation, Stature Electric, Inc. and Precision Motor Technology B.V. (“Premotec”).

The TUs offer a wide range of standard and customized motors, encoders and drives for original equipment manufacturers (OEM) and end user applications. A particular strength of each company is its ability to design and manufacture high quality custom motion control solutions to meet the needs of its customers.

The Company has made considerable progress in implementing its corporate strategy, with the driving force of “electro-magnetic, mechanical and electronic motion technology/know how”. The Company’s commitment to Allied’s Systematic Tools, or AST for short, is driving continuous improvement in quality, delivery, cost and growth. AST utilizes a tool kit to effect desired changes through well defined processes such as Strategy Deployment, Target Marketing, Value Stream Mapping, Material Planning, Standard Work and Single Minute Exchange of Dies.

Outlook

Despite the challenges Allied Motion faced in 2009 as a result of the economic downturn, the Company returned to profitability in the second half of 2009 and continued to improve profitability in the first quarter of 2010. Conditions have continued to improve and management continues its efforts to foster additional growth in revenues and profitability. Bookings in the first quarter were the largest in the history of the Company since the company began focusing strictly on the motion control markets in 2002, at $26.2 million, compared to approximately $17.0 million in the first quarter of 2009, and $12.2 million in the fourth quarter of 2009. While increased orders has brought some signs of economic recovery, the Company is approaching the increased demand with cautious optimism, as there have been no real long term indicators that indicate the current level of orders will continue.

As announced in the fourth quarter of 2009, the Company relocated its COPI encoder business from Chatsworth, California to the Emoteq facilities in Tulsa, Oklahoma. The Company believes that the combined entity, supporting both the motor and encoder technologies in a cohesive systems approach within the same facility, will provide the best opportunity for long term sustainable growth in sales and profitability in the future.

The Company has a strong balance sheet, and improved liquidity when compared with the previous year. The Company’s cash position, net of outstanding debt, increased by approximately $5.5 million over the last twelve months. The Company continues its position of maintaining resources in electro-magnetic, mechanical and electronic design capabilities, as its primary goal is to provide products that “raise the bar” with customers and provide important differentiating solutions against competition. Management will continue to make investments in the markets believed to provide the most opportunity for continued growth and profitability of the Company.

Table of Contents

One of the Company’s major challenges is to maintain and improve price competitiveness. The Company’s customers are continually being challenged by their markets and competitors to be price competitive and they are requiring their suppliers to deliver the highest quality product at the lowest price possible. Currently, the Company is producing some of its motor sub-assemblies and finished products at sub-contract manufacturing facilities in China and Slovakia. The Company has increased efforts to identify opportunities where production in low cost regions can improve profitability while delivering the same high quality products.

The Company’s products contain certain metals, and at certain times the Company experiences significant fluctuations in the costs of these metals, particularly copper, steel and zinc, which are all key materials in our products. The Company has reacted by aggressively sourcing material at lower cost from Asian markets and by passing on surcharges and price increases to our customers.

The Company continues to pursue aggressive motor and drive development plans for new products that leverage the combined technology base of the Allied Motion companies. The Company focuses on new product designs that design-out cost, provide higher level, value-added performance solutions and meet the needs of its served markets. Over the last few years, the Company announced several new motor designs targeted at various markets. It normally takes twelve months to get new products designed into new customer applications.

The Company continues its focus on a ONE TEAM sales force to more effectively leverage resources utilizing a company wide sales organization. With the ONE TEAM sales force selling all the Company’s products, management’s expectation is that this capability provides opportunities to increase sales from existing customers and secure new business opportunities.

Management believes the strategy we have developed for the Company will accomplish our long term goals of increasing shareholder value through the continued strengthening of the foundation necessary to achieve growth in sales and profitability.

Operating Results

Quarter Ended March 31, 2010 compared to Quarter Ended March 31, 2009

NET INCOME The Company reported net income of $734,000, or $0.09 per diluted share for the first quarter of 2010, as opposed to a net loss of ($730,000) or ($.10) loss per diluted share for the first quarter of 2009.

EBITDA EBITDA was 1,563,000 for the first quarter of 2010 compared to a loss of $152,000 for the same quarter last year. EBITDA is a non-GAAP measurement that consists of income before interest expense, provision for income taxes, and depreciation and amortization. See information included in “Non - GAAP Measures” below for a reconciliation of net income to EBITDA.

REVENUES Revenues were $17,422,000 in the quarter ended March 31, 2010 compared to $15,295,000 for the quarter ended March 31, 2009. Our vehicle and industrial markets accounted for the majority of the 14% increase. We continue to utilize our low cost region operations to ensure we are globally competitive on a cost basis while maintaining the same high technical and commercial standards we have already established.

Sales to U.S. customers accounted for 57% and 58% of our sales in the first quarter of 2010 and 2009, respectively, with the balance to customers primarily in Europe and Canada. The weakening of the U.S. dollar against the Euro in the first quarter of 2010 compared to the first quarter of 2009 accounted for less than one percent of the 14% increase in revenues.

Table of Contents

ORDER BACKLOG At March 31, 2010, order backlog was approximately $29.1 million, which is up 18% from the same time last year and up 38.6% from the backlog at December 31, 2009.

GROSS MARGINS Gross margin as a percentage of revenues was 25% and 18% for the quarters ended March 31, 2010 and 2009, respectively. The increase in gross margin is primarily a result of increased sales with minimal changes to fixed overhead costs and a reduction in material and variable manufacturing overhead costs.

SELLING EXPENSES Selling expenses in the first quarter were $941,000 compared to $878,000 for the first quarter last year. The 7% increase is primarily due to an increase in the Company’s Sales force.

GENERAL AND ADMINISTRATIVE EXPENSES General and administrative expenses were $2,059,000 in the quarter ended March 31, 2010 compared to $1,725,000 in the quarter ended March 31, 2009. The 19% increase is primarily a result of increased compensation expense, which includes incentive bonuses.

ENGINEERING AND DEVELOPMENT EXPENSES Engineering and development expenses were $1,013,000 in the first quarter of 2010 and $995,000 in the same quarter last year. We continue to maintain strong engineering capabilities to meet our customers’ needs and to expand our product base for future opportunities.

AMORTIZATION OF INTANGIBLE ASSETS Amortization of intangible assets expense was $165,000 in the quarter ended March 31, 2010 and $255,000 in the same quarter last year. The 35% decrease is primarily the result of the impairment that was recognized on certain intangible assets in the second quarter of 2009 and other intangible assets that became fully amortized in 2009.

INTEREST EXPENSE Interest expense for the first quarter ended March 31, 2010 was $3,000 compared to $15,000 in the quarter ended March 31, 2009. The decrease in interest is directly attributable to the decrease in outstanding debt obligations.

INSURANCE RECOVERIES Insurance Recoveries were $685,000 for the quarter ended March 31, 2010, compared to $56,000 for the same quarter last year. The recoveries this quarter represent the final settlement for the business interruption insurance claim which resulted from the fire at the Company’s COPI facility in the fourth quarter of 2008.

OTHER INCOME Other Income increased $136,000 to $155,000 for the quarter ended March 31, 2010, as a result of foreign exchange gains recognized in the current year as opposed to foreign exchange losses for the same quarter of the prior year, as well as recognition of grant income for doing business within certain jurisdictions.

INCOME TAXES Provision for income taxes was $330,000 for the first quarter of 2010 as opposed to a benefit for income taxes of $330,000 for the first quarter last year. The effective rate used to record income taxes is based on projected results for the fiscal year. The effective income tax rate as a percentage of income (loss) before income taxes was 31% for the quarters ended March 31, 2010 and 2009. The effective tax rate is lower than the statutory rate primarily due to differences in state and foreign tax rates.

Non-GAAP Measures

EBITDA is provided for information purposes only and is not a measure of financial performance under generally accepted accounting principles. The Company believes EBITDA is often a useful measure of a Company’s operating performance and is a significant basis used by the Company’s management to measure the operating performance of the Company’s business because EBITDA excludes charges for

Table of Contents

depreciation, amortization and interest expense that have resulted from our debt financings, as well as our provision for income tax expense. Accordingly, the Company believes that EBITDA provides helpful information about the operating performance of its business, apart from the expenses associated with its physical assets or capital structure. EBITDA is frequently used as one of the bases for comparing businesses in the Company’s industry. EBITDA does not represent and should not be considered as an alternative to net income, operating income, net cash provided by operating activities or any other measure for determining operating performance or liquidity that is calculated in accordance with generally accepted accounting principles.

The Company’s calculation of EBITDA for the three months ended March 31, 2010 and 2009 is as follows (in thousands):

	For the three months ended March 31,		For the three months ended March 31,
	2010		2009
Net income (loss)	$	734	$	(730	)
Interest expense	3		15
Provision (Benefit) for income tax	330		(330		)
Depreciation and amortization	496		893
Income before interest expense, provision for income taxes and depreciation and amortization(EBITDA)	$	1,563	$	(152	)

Liquidity and Capital Resources

The Company’s liquidity position as measured by cash and cash equivalents increased $841,000 to a balance of $5,311,000 at March 31, 2010. This increase compares to a decrease of $2,078,000 for the same period last year. During the first quarter of 2010, operations provided $1,622,000 in cash compared to $1,824,000 used for the quarter ended March 31, 2009. The increase in cash provided from operations of $3,446,000 is primarily due to higher net income, along with increases in working capital components as a result of improved economic conditions when compared to the same quarter of last year. In addition, payments related to employee incentive bonuses were $1,200,000 lower in the first quarter of 2010 compared to the same period of 2009 as a result of the economic downturn in 2009 and its impact on the Company.

Net cash used in investing activities was $304,000 and $241,000 for the first quarter of 2010 and 2009, respectively, which is all related to the purchase of property and equipment.

Net cash used in financing activities was $198,000 for the quarter ended March 31, 2010 compared to $30,000 used for the same period last year. The increase in cash used is primarily due to increased paydowns of Company debt and a lower amount of stock transactions under employee benefit stock plans that occurred in the first quarter of 2010 compared to the first quarter of 2009.

At March 31, 2010, the Company had $322,000 of debt obligations representing borrowings on the Company’s line-of-credit.

Table of Contents

The Company’s Amended Credit Agreement, which matures on July 31, 2010, provides revolving credit up to $8 million and €2 million. Borrowings under the revolver incur interest of LIBOR plus 2.5%. Overnight borrowings incur interest at PRIME plus 1.50%. The unused portion of the revolver is charged a commitment fee of .75% per annum.

The amended Credit Agreement contains certain financial covenants related to achieving minimum EBITDA levels, maintaining minimum consolidated tangible net worth, and placing a ceiling on the amount of capital expenditures incurred by the Company. The Company was in compliance with all covenants at March 31, 2010.

As of March 31, 2010, the interest rate for all of the Company’s outstanding debt is on an overnight rate of 4.75%. As of March 31, 2010, the amount available under the lines-of-credit was approximately $10.4 million.

The Company’s working capital, capital expenditure and debt service requirements are expected to be funded from cash provided by operations and amounts available under the Company’s credit facilities. Payments against restructuring reserves related to the relocation of the Company’s COPI operation to its Emoteq facility have been funded, and are expected to be funded from cash on hand and cash provided from operations.

The Company has a bank overdraft facility payable to a foreign bank with no monthly repayments required. The facility had no outstanding balance as of March 31, 2010. The amount available under the overdraft facility was € 300,000 ($404,000 at the March 31, 2010 exchange rate).

Critical Accounting Policies

The Company has prepared its financial statements in conformity with accounting principles generally accepted in the United States, and these statements necessarily include some amounts that are based on informed judgments and estimates of management. The Company’s significant accounting policies are discussed in Note 1 in the Annual Report on Form 10-K for the year ended December 31, 2009. The policies are reviewed on a regular basis. The Company’s critical accounting policies are subject to judgments and uncertainties which affect the application of such policies. The Company uses historical experience and all available information to make these judgments and estimates. As discussed below the Company’s financial position or results of operations may be materially different when reported under different conditions or when using different assumptions in the application of such policies. In the event estimates or assumptions prove to be different from actual amounts, adjustments are made in subsequent periods to reflect more current information. The Company’s critical accounting policies include:

The Company maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments. The allowance is based on historical experience and judgments based on current economic and customer specific factors. Significant judgments are made by management in connection with establishing the Company’s customers’ ability to pay at the time of shipment. Despite this assessment, from time to time, the Company’s customers are unable to meet their payment obligations. The Company continues to monitor customers’ credit worthiness, and use judgment in establishing the estimated amounts of customer receivables which may not be collected. A significant change in the liquidity or financial position of the Company’s customers could have a material adverse impact on the collectibility of accounts receivable and future operating results.

Inventory is valued at the lower of cost or market. The Company monitors and forecasts expected inventory needs based on sales forecasts. Inventory is written down or written off when it becomes obsolete or when it is deemed excess. These determinations involve the exercise of significant judgment by management. If actual market conditions are significantly different from those projected by management, the recorded reserve may be adjusted, and such adjustments may have a significant impact on the

Table of Contents

Company’s results of operations. Demand for the Company’s products can fluctuate significantly, and in the past the Company has recorded substantial charges for inventory obsolescence.

The Company records deferred tax assets and liabilities for the estimated future tax effects of temporary differences between the tax basis of assets and liabilities and amounts recorded in the consolidated financial statements, and for operating loss and tax credit carryforwards. Realization of the recorded deferred tax assets is dependent upon the Company generating sufficient taxable income in the appropriate tax jurisdiction in future years to obtain benefit from the reversal of net deductible temporary differences and from tax credit and operating loss carryforwards. A valuation allowance is provided to the extent that management deems it more likely than not that the net deferred tax assets will not be realized. The amount of deferred tax assets considered realizable is subject to adjustment in future periods if estimates of future taxable income are changed.

The Company provides pension and postretirement benefits for certain domestic retirees and records the cost of the obligations based on estimates. The net periodic costs are recognized as employees render the services necessary to earn the benefits. Several assumptions are used to calculate the expense and liability related to the plans including the discount rate, the expected rate of return on plan assets, the future rate of compensation increases and health care cost increases. The discount rate is selected based on a bond pricing model that relates to the projected future cash flows of benefit obligations. Actuarial assumptions used are based on demographic factors such as retirement and mortality. Actual results could vary materially from the Company’s actuarial assumptions, which may have an impact on the amount of reported expense or liability for pension or postretirement benefits.

Item 3. Quantitative and Qualitative Disclosures About Market Risk

Market risk represents the risk of loss that may impact the financial position, results of operations or cash flows of the Company due to adverse changes in financial and commodity market prices and rates. The Company is exposed to market risk from changes in foreign currency exchange rates as measured against the United States dollar. These exposures are directly related to its normal operating and funding activities.

Foreign Currency Risk

Sales from Premotec are denominated in Euros, thereby creating exposures to changes in exchange rates. The changes in the Euro/U.S. exchange rate may positively or negatively affect the Company’s sales, gross margins, net income and retained earnings. A 10% change in the Euro vs. the U.S dollar could affect the Company’s earnings for the remainder of the year by approximately $100,000 and net assets by approximately $800,000. The Company does not believe that reasonably possible near-term changes in exchange rates will result in a material effect on future results or cash flows of the Company.

Item 4T. Controls and Procedures

The Company’s controls and procedures include those designed to ensure that material information is accumulated and communicated to the Company’s management as appropriate to allow timely decisions regarding required disclosure. Under the supervision and with the participation of management, the Company’s chief executive officer and chief financial officer evaluated the effectiveness of the Company’s disclosure controls and procedures designed to ensure that information is recorded, processed, summarized and reported in a timely manner as required by Exchange Act reports such as this Form 10-Q and concluded that as of the end of the Company’s most recent fiscal quarter they are effective.

There have not been any changes in the Company’s internal controls over financial reporting during the quarter ended March 31, 2010 that have materially affected or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

Table of Contents

PART II. OTHER INFORMATION

Item 5. Other Information

The Company held its annual stockholders’ meeting on May 13, 2010. At the Annual Meeting, the stockholders of the Company elected two directors for the coming year. Pursuant to Colorado law and the Company’s Bylaws, all five other incumbent directors shall continue in their office as directors until the next annual meeting or until resignation or removal.

The results of the voting for the seven director nominees were as follows:

Nominee	For	% of Outstanding Shares		Withheld	Broker Non- votes
D.D. Hock	4,640,008	59.3	%	943,159	1,667,286
G.D. Hubbard	5,127,260	65.5	%	455,907	1,667,286
G.J. Pilmanis	4,637,372	59.2	%	945,795	1,667,286
M.M. Robert	5,491,658	70.1	%	91,509	1,667,286
S.R. (Rollie) Heath, Jr.	4,640,185	59.3	%	942,982	1,667,286
R.D. Smith	4,634,187	59.2	%	948,980	1,667,286
R.S. Warzala	5,492,056	70.1	%	91,111	1,667,286

The proposal to consider an amendment to the 2007 Stock and Incentive Plan to increase the number of Common Stock authorized for issuance under the plan by 600,000 shares and to increase the number of shares that may be granted to any one participant during a calendar year was approved. The results of the voting are below:

For		Withheld		Abstentions		Broker Non- votes
4,721,330		837,124		24,713		1,667,286

In addition, the proposal to consider and ratify the appointment of Ehrhardt Keefe Steiner & Hottman PC (“EKS&H”) as the Company’s independent registered public accounting firm for the 2010 fiscal year was approved. The results of the voting are below:

For		Withheld		Abstentions		Broker Non- votes
7,122,139		94,266		26,875		7,173

The Annual Meeting was adjourned and will be reconvened on May 27, 2010, at the Company’s headquarters at 23 Inverness Way East, Suite 150, Englewood, Colorado, to vote on Proposal 2 - Approval of an Amendment to the Company’s Articles of Incorporation for the purpose of changing the voting requirements for the election of directors.

Table of Contents

Item 6. Exhibits

(a) Exhibits

10.1 Amendment No. 3 to the Year 2000 Stock Incentive Plan (attached herein)

10.2 Amendment No. 1 to the Year 2007 Stock Incentive Plan (Incorporated by reference to Appendix B to the Company’s Proxy Statement dated March 19, 2010)

31.1 Certification of the Chief Executive Officer pursuant to Rule 13a-14(a) or 15d-14(a) of the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

31.2 Certification of the Chief Financial Officer pursuant to Rule 13a-14(a) or 15d-14(a) of the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

32.1 Certification of the Chief Executive Officer pursuant to 18 U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

32.2 Certification of the Chief Financial Officer pursuant to 18 U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

DATE:	May 17, 2010	ALLIED MOTION TECHNOLOGIES INC.

		By:	/s/ Richard D. Smith

		Chief Financial Officer

ALLIENT INC - Quarter Report: 2010 March (Form 10-Q)

Number of Shares of the only class of Common Stock outstanding: 7,830,481 as of May 17, 2010

Foreign Currency Risk