AMERITYRE CORP - Annual Report: 2016 (Form 10-K)
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
Form 10-K
(Mark One)
|
|
☒
|
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
|
For the fiscal year ended June 30, 2016
|
|
OR
|
|
☐
|
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
|
For the transition period from to
|
Commission file number 000-50053
AMERITYRE CORPORATION
(Exact name of registrant as specified in its charter)
Nevada
(State or other jurisdiction of
incorporation or organization)
|
87-0535207
(I.R.S. Employer
Identification No.)
|
1501 Industrial Road
Boulder City, Nevada 89005
(702) 293-1930
(Address of principal executive office and telephone number)
|
Securities registered pursuant to Section 12(b) of the Exchange Act:
Title of each class
|
Name of each exchange on which registered
|
N/A
|
N/A
|
Securities registered pursuant to Section 12(g) of the Exchange Act: Common Stock
Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. YES ☐ NO ☒
Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. YES ☐ NO ☒
Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. YES ☒ NO ☐
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). YES ☒ NO ☐
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the Registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ☒
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer ☐ Accelerated filer ☐ Non-accelerated filer ☐ Smaller reporting company ☒
Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). YES ☐ NO ☒
On September 15, 2016 there were 42,325,287 shares of common stock of the Registrant outstanding.
As of December 31, 2015, the Registrant's most recent second quarter, there were 41,117,787 shares of common stock of the Registrant held by non-affiliates outstanding with a market value $3,289,423 (based upon the closing price of $0.08 per share of common stock as quoted on the NASD: OTCQB Marketplace).
Documents Incorporated by Reference
Portions of the Registrant's definitive proxy statement, which will be issued in connection with the 2016 Annual Meeting of Shareholders of Amerityre Corporation, are incorporated by reference into Part III of this Annual Report on Form 10-K.
AMERITYRE CORPORATION
2016 ANNUAL REPORT ON FORM 10-K
|
Page
|
|
PART I
|
|
|
ITEM 1.
|
5
|
|
ITEM 1A.
|
8
|
|
ITEM 1B.
|
12
|
|
ITEM 2.
|
12
|
|
ITEM 3.
|
12
|
|
ITEM 4.
|
12
|
|
PART II
|
|
|
ITEM 5.
|
13
|
|
ITEM 6.
|
13
|
|
ITEM 7.
|
13
|
|
ITEM 7A.
|
22
|
|
ITEM 8.
|
22
|
|
ITEM 9.
|
22
|
|
ITEM 9A.
|
22
|
|
ITEM 9B.
|
23
|
|
PART III
|
23
|
|
ITEM 10.
|
DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
|
|
ITEM 11.
|
EXECUTIVE COMPENSATION
|
|
ITEM 12.
|
SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
|
|
ITEM 13.
|
CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
|
|
ITEM 14.
|
PRINCIPAL ACCOUNTING FEES AND SERVICES
|
|
PART IV
|
|
|
ITEM 15.
|
25
|
AMERITYRE CORPORATION
2016 ANNUAL REPORT ON FORM 10-K
This report contains "forward-looking statements" within the meaning of the federal securities laws. Forward-looking statements include statements concerning our plans, objectives, goals, strategies, future events, future revenues or performance, capital expenditures, financing needs, plans or intentions relating to acquisitions and other information that is not historical information. In some cases, forward-looking statements can be identified by terminology such as "believes," "expects," "may," "will," "should," "anticipates," or "intends" or the negative of such terms or other comparable terminology, or by discussions of strategy. We may also make additional forward-looking statements from time to time. All such subsequent forward-looking statements, whether written or oral, by us or on our behalf, are also expressly qualified by these cautionary statements.
All forward-looking statements, including without limitation, management's examination of historical operating trends, are based upon our current expectations and various assumptions. Our expectations, beliefs and projections are expressed in good faith and we believe there is a reasonable basis for them, but, there can be no assurance that management's expectations, beliefs and projections will result or be achieved. All forward-looking statements apply only as of the date made. We undertake no obligation to publicly update or revise forward-looking statements which may be made to reflect events or circumstances after the date made or to reflect the occurrence of unanticipated events.
There are a number of risks and uncertainties that could cause our actual results to differ materially from the forward-looking statements contained in or contemplated by this report. Any forward-looking statements should be considered in light of the risks set forth in "Part I. Item 1A. Risk Factors" and elsewhere in this report.
This report may include information with respect to market share, industry conditions and forecasts that we obtained from internal industry research, publicly available information (including industry publications and surveys), and surveys and market research provided by consultants. The publicly available information and the reports, forecasts and other research provided by consultants generally state that the information contained therein has been obtained from sources believed to be reliable, but there can be no assurance as to the accuracy and completeness of such information. We have not independently verified any of the data from third-party sources, nor have we ascertained the underlying economic assumptions relied upon therein. Similarly, our internal research and forecasts are based upon our management's understanding of industry conditions, and such information has not been verified by any independent sources.
For convenience in this report, the terms “Amerityre,” “Company,” “our,” “us” or “we” may be used to refer to Amerityre Corporation.
PART I
Overview
Amerityre incorporated as a Nevada corporation on January 30, 1995 under the name American Tire Corporation and changed its name to Amerityre Corporation in December 1999.
Amerityre engages in the research and development, manufacturing, and sale of polyurethane tires. We believe that we have developed unique polyurethane formulations that allow us to make products with superior performance characteristics in the areas of abrasion resistance, energy efficiency and load-bearing capabilities, in comparison to conventional rubber tires. We also believe that our manufacturing processes are more energy efficient than the traditional rubber tire manufacturing processes, in part because our polyurethane compounds do not require the multiple processing steps, extreme heat, and high pressure that are necessary to cure rubber. Using our polyurethane technologies, we believe tires can be produced which last longer, are less susceptible to failure and are friendly to the environment.
Products
Our polyurethane material technology is based on two proprietary formulations; closed-cell polyurethane foam, a lightweight material with high load-bearing capabilities for low duty cycle applications, and Elastothane®, a high performance polyurethane elastomer with high load-bearing capabilities for high duty applications. We are concentrating on three segments of the tire market: closed-cell polyurethane foam tires, polyurethane elastomer industrial tires and tires for agricultural applications.
Closed-Cell Polyurethane Foam Tires
We currently manufacture closed-cell polyurethane foam tires for bicycles, hand trucks, lawn and garden, wheelbarrow, personnel carriers, and medical mobility products. Our closed-cell polyurethane foam products are often referred to as flat-free because they have no inner tube, do not require inflation and will not go flat even if punctured. Our tires are mounted on a wheel rim in much the same way as a pneumatic tire. Our closed-cell polyurethane foam products are virtually maintenance free, non-toxic, provide extended tire life, and offer superior energy efficiency compared to rubber based tires. Closed cell foam tires and components accounted for 53% of fiscal 2016 revenues.
Polyurethane Elastomer Industrial Tires
We have developed solid polyurethane industrial tires made of Elastothane®. We currently produce over 20 sizes for Class 1, 4 and 5 forklifts. We have also developed polyurethane elastomer tires for scissor lifts. We believe our tires are superior to rubber tires as they are non-marking, more energy efficient, carry greater load weight, operate in lower temperature environments and have longer service life. Elastomer industrial tires accounted for 1% of fiscal 2016 revenues.
Agricultural Tires
Amerityre has developed three products for the agricultural tire market, flat-free pivot tires used in irrigation systems, seeder tires, and a hay baler tire. These products have successfully field tested and we developed strategies to increase the distribution of these products into the market. Agricultural tires accounted for 46% of fiscal 2016 revenues.
Raw Materials and Supplies
The two principal chemical raw materials required to manufacture our products are known generically as polyols and isocyanates. In addition, we purchase various chemical additives that are mixed with the polyols and isocyanates. We purchase our chemical raw materials from multiple suppliers to assure adequate supply and price competition.
In addition to the chemical raw materials, we purchase steel and plastic wheel components for use in tire and wheel assemblies. We purchase these components from domestic and overseas suppliers.
Operations/Manufacturing
Our closed-cell polyurethane foam products are primarily manufactured utilizing multiple–stationed, carousel centrifugal molding presses. We produce closed-cell foam products by pouring a proprietary polyurethane formula into a mold, which then spreads out in the mold through centrifugal force. The molding process occurs by reacting monomeric diphenylmethanediisocyanate (MDI) with polyol and other chemicals. The chemical reaction causes a cross linking of the chemicals, which cures into a solid. The closed-cell polyurethane foam product is then removed from the mold and the process is repeated.
All of our products are inspected prior to shipment to ensure quality. Any closed-cell foam products considered by our quality control personnel to be defective are disposed of through traditional refuse disposal services.
Information Systems
We use commercial computer aided design (CAD) and finite element analysis (FEA) software tools in the engineering and design of our products. This software allows us to integrate our proprietary manufacturing and production data with our design technology, enabling our engineering department to leverage our previous manufacturing and test results to predict the performance characteristics of new product designs and product improvements. For general business purposes, we use commercially available software for financial, distribution, manufacturing, customer relationships and payroll management.
Sales, Marketing and Distribution
Amerityre utilizes independent manufacturer representatives with tire industry experience to promote and sell our products. These representatives sell all of our products in a designated sales territory. These independent sales professionals complement our in-house sales department in Boulder City.
We currently distribute our products directly from our manufacturing facility in Boulder City, Nevada.
Internationally, we have several distribution partners established in Canada, Australia, and Europe. We continue to seek additional international sales and marketing partners to expand the worldwide sales and distribution of our products.
Customers
We have three customers who accounted for 21% of our sales for the year ended June 30, 2016 and two customers who accounted for 27% of our sales for the year ended June 30, 2015. In general, our customers are OEMs of lawn and garden products and outdoor power equipment, regional tire distributors, retail cooperatives, agricultural tire distributors, and retailers of lawn and garden products, bicycle tires and hand truck tires.
Competition
There are several companies that produce not-for-highway-use or light-use tires from polyurethane foam such as Greentyre, who manufactures in the UK; Carefree Tire, who manufactures in China; Marastar (a division of Carlstar), who manufactures in China, and; Custom Engineered Wheels and Krypton Industries, who manufacture in India. We believe our closed-cell polyurethane foam tires are superior to the polyurethane foam tires offered by the aforementioned competitors because our products contain millions of closed-cell versus open-cell air bubbles. The closed cell technology gives our products higher load bearing characteristics than competitor tire products that have open-cell polyurethane foam, while producing a ride quality comparable to a pneumatic tire.
In addition to manufacturers of polyurethane foam tires, we compete directly with companies that manufacture and market traditional not-for-highway-use, low-duty pneumatic, semi-pneumatic, and solid tires made from rubber. The not-for-highway use tire industry historically has been highly competitive, and several of our competitors have financial resources that substantially exceed ours. In addition, many of our competitors are very large companies, such as Kenda, Taiwan; Maxxis International, Taiwan; Cheng Shin, China; and Carlstar. These competitors have established brand name recognition, distribution networks for their products, and have strong consumer loyalty to their products.
In the agricultural tire market, the market leader is Titan Tire USA, a global manufacture of agriculture pneumatic tire and wheel assemblies. In addition, Rhino Gator, BB Metal Works, and Mach II are North American competitors offering various types of flat free pivot tire solutions. There are various domestic and international competitors in the seeder tire and hay baler tire markets.
Intellectual Property Rights
We seek to obtain patent protection for, or to maintain as trade secrets, those inventions that we consider important to the development of our business. We rely on a combination of patent, trademark, copyright and trade secret laws in the United States and other jurisdictions as well as confidentiality procedures and contractual provisions to protect our proprietary technology and branding. We control access to our proprietary technology and enter into confidentiality agreements with our employees and other third parties. We own twelve issued U.S. patents. We use various trademarks in association with marketing our products, including the names Amerityre®, Elastothane®, Arcus®, Atmospheric®, Logo®, Kik® and Kryon®.
Trade Secrets
Our polyurethane material technology is based on two key proprietary formulation types, a closed-cell polyurethane foam, which is a lightweight material with high load-bearing capabilities for low duty cycle applications, and a polyurethane elastomer, which is a high performing material with high load-bearing capabilities for high duty applications. Our technology has been maintained as Trade Secret by combination of limited and controlled access to our facility along with a use of non-disclosure agreements with persons as have been afforded access thereto and, to the best of our knowledge and belief, we have maintained the technology as trade secrets as required to provide for the protection of our polyurethane material technology under U.S. trade secret laws.
Patents
Set forth in the schedule below are the issued patents that we have received.
Description of Patent
|
|
U.S. Patent
App/Serial No.
|
|
Issued Date or
Date Filed
|
|
Brief Description/Purpose
|
Improved Method and Apparatus for Making Tires and the Like
|
|
6,165,397
|
|
12/26/2000
|
|
Applies to pouring the material at the inside diameter (where the tire starts) during the manufacturing process.
|
Run-Flat Tire with Elastomeric Inner Support
|
|
6,679,306
|
|
1/20/2004
|
|
Applies to a polyurethane insert within a tire to create a “run-flat” system.
|
Method and Apparatus for Vacuum Forming a Wheel from a Urethane Material
|
|
7,377,596
|
|
5/27/2008
|
|
Applies to the method we employ to coat a light gauge steel or aluminum wheel by evacuating air from the mold while moving material through the mold utilizing a vacuum process to eliminate pockets of air within the matrix of the material. The resulting product becomes a “Composite” wheel.
|
Elastomeric Tire with Arch Shaped Shoulders
|
|
6,971,426
|
|
12/06/2005
|
|
Applies the design of the Arcus® run-flat tire (the first polyurethane elastomer tire to run with or without air).
|
Method for Manufacturing a Tire with Belts, Plies and Beads Using a Pre-cured Elastomer and Cold Rolling Method
|
|
6,974,519
|
|
12/13/2005
|
|
Applies to how we put the plies, beads and belts on a mandrel or bladder to be placed inside a mold for manufacturing a tire.
|
Improved Vacuum Forming Apparatus for Vacuum Forming a Tire, Wheel or Other Item from an Elastomeric Material
|
|
7,527,489
|
|
5/5/2009
|
|
Applies to an improvement in the vacuum forming equipment used to manufacture a tire and other items.
|
Method for Vacuum Forming an Elastomeric Tire
|
|
8,114,330
|
|
2/14/2012
|
|
Applies to polyurethane tires and methods we employ to evacuate air from mold while moving material through the mold.
|
Run Flat Tire Insert System
|
|
7,398,809
|
|
7/15/2008
|
|
Applies to how to utilize an insert on a wheel within a corresponding pneumatic tire.
|
Method and Apparatus for Vacuum Forming an Elastomeric Tire
|
|
7,399,172
|
|
7/15/2008
|
|
Applies to polyurethane tires and the method we employ to evacuate air from the mold while moving material through the mold utilizing a vacuum process to eliminate air pockets within the matrix of the material.
|
System for Retreading a Transport Tire with Polyurethane Tread
|
|
8,206,141
|
|
6/26/2012
|
|
Applies to apparatus we used to retread transport tires with polyurethane tread.
|
Method for Retreading a Heavy Duty Tire with a Polyurethane Tread
|
|
8,603,377
|
|
12/10/2013
|
|
Applies to the method we employ for applying a polyurethane tread to a rubber tire casing.
|
Pivot Wheel Segment
|
|
D710,913
|
|
8/12/2014
|
|
Applies to irrigation wheels used in special soil conditions.
|
Trademarks
Set forth in the schedule below are the United States trademarks that have been registered.
Trademarks
|
|
Registration/Serial #
|
|
Issued
|
Amerityre®
|
|
2,401,989
|
|
8/14/2001
|
Elastothane®
|
|
3,139,489
|
|
9/5/2006
|
Elastothane®
|
|
3,497,302
|
|
9/2/2008
|
Arcus®
|
|
2,908,077
|
|
4/24/2004
|
Atmospheric®
|
|
3,089,313
|
|
5/9/2006
|
Logo®
|
|
4,404,548
|
|
9/17/2013
|
Kik®
|
|
3,608,633
|
|
4/21/2009
|
Kryon®
|
|
4,009,423
|
|
9/9/2011
|
We also own certain trademark applications and/or trademark registrations relating to the Arcus® trademark in several foreign jurisdictions.
Employees
As of September 15, 2016, we had 18 full-time employees and 1 part-time employee, including 5 salaried and 13 hourly employees. We may hire temporary labor for manufacturing needs as required. We believe that we will be able to hire a sufficient quantity of qualified laborers in the local area to meet our employment needs. Our manufacturing process does not require special skills, other than training to our production techniques and specific equipment. Our employees are not represented by a labor union or a collective bargaining agreement. We consider our relations with our employees to be good.
Research and Development
Our current research and development activities are focused primarily on product improvement (i.e., forklift tires and agriculture tires) and maintaining cost efficient manufacturing processes. We continue to investigate new “low cost” polyurethane foam formulations to supplement our premium formulations and increase the Company’s competitive position in specific market segments. Due to the Company’s limited resources, tire projects which are contingent on additional development, such as composite and automotive tires, have been put on hold and will be revisited at a later date when sufficient resources are available. Research and development expenses of an external testing nature were $58,319 and $23,058, for fiscal 2016 and 2015, respectively. All research and development expenses of the Company including internal and external expenses were $222,094 and $200,753, for fiscal 2016 and 2015, respectively.
Historically, we have lost money from operations and we have made no provision for any contingency, unexpected expenses or increases in costs that may arise.
Since inception, we have been able to cover our operating losses from the sale of our securities. We do not know if these sources of funds will be available to cover future operating losses. If we are unable to obtain adequate sources of funds to operate our business we may not be able to continue as a going concern.
Our business operations and plans could be adversely affected in the event we need additional financing and are unable to obtain such funding. To the extent that our business strategy requires expanding our operations, such expansion could be costly to implement and may cause us to experience significant continuing losses. It is possible that our available short-term assets and anticipated revenues may not be sufficient to meet our operating expenses, business expansion plans, and capital expenditures for the next twelve months. Insufficient funds may prevent us from implementing our business strategy or may require us to delay, scale back or eliminate certain opportunities for the commercialization of our technology and products. If we cannot generate adequate sales of our products, or increase our revenues through licensing of our technology or other means, we may be forced to cease operations.
In order to succeed as a company, we must continue to manufacture quality products and sell adequate quantities of products at prices sufficient to generate profits. We may not accomplish these objectives. A number of factors may affect future sales of our products even if we are successful in increasing our revenue base. These factors include whether competitors produce alternative or superior products and whether the cost of implementing our products is competitive in the marketplace.
In addition, we are attempting to increase revenues through licensing our technology and manufacturing rights, and selling polyurethane chemical systems to customers that produce their own products. If these proposals are not viable in the marketplace, we may not generate significant revenues from these efforts.
The “slow growth” in the U.S. economy could have an adverse impact on our business, operating results or financial position.
The U.S. economy has experienced “slow growth” since the last U.S. recession and general downturn in the global economy. A continuation or worsening of these conditions, including credit and capital markets disruptions, could have an adverse impact on our business, operating results or financial position in a number of ways. We may experience declines in revenues and cash flows as a result of reduced orders, payment delays or other factors caused by the economic problems of our customers and prospective customers. We may experience supply chain delays, disruptions or other problems associated with financial constraints faced by our suppliers and customers. We may incur increased costs or experience difficulty with our ability to borrow in the future or otherwise with financing our operating, investing or financing activities. Any of these potential problems could hinder our efforts to increase our sales and might, if severe and extensive enough, cause our sales to decline, jeopardizing our ability to operate.
We may experience delays in resolving unexpected technical issues experienced in completing development of new technology that will increase development costs and postpone anticipated sales and revenues.
As we develop and improve our products, we frequently must solve chemical, manufacturing and/or equipment-related issues. Some of these issues are ones that we cannot anticipate because the products we are developing are new. If we must revise existing manufacturing processes or order specialized equipment to address a particular issue, we may not meet our projected timetable for bringing products to market. Such delays may interfere with existing manufacturing schedules, negatively affect revenues and increase our cost of operations.
We have entered new market segments where we have limited resources, and we may be unable to successfully manage planned growth.
We have limited experience within the new market segments we have entered. We have less marketing and product development resources at our disposal compared to our competitors in the tire industry. To remain profitable, our products must be cost-effective, economical to produce, and have the ability to be distributed on a commercial scale. Furthermore, if our technologies and products do not achieve, or if they are unable to maintain, market acceptance or regulatory approval, we may not be profitable.
Our success depends, in part, on our ability to license, market and distribute, and commercialize our technologies and products effectively. We have limited manufacturing, marketing and distribution capabilities. We may not properly ascertain or assess any and all risks inherent in the industry. We may not be successful in entering into new licensing or marketing arrangements. If we are unable to meet the challenges posed by our planned licensing, manufacturing, distribution and sales growth, our business may fail.
Our limited resources and working capital levels may hinder our ability to take advantage of business development opportunities in our various market segments, reducing growth and profitability of the Company
We currently have limited resource levels, which has forced us to make choices regarding which market opportunities we should pursue. Our inability to raise additional working capital has resulted in the Company deferring pursuit of potentially attractive market opportunities. If we are not able to raise capital going forward, it is possible that additional opportunities to improve the Company’s market position will be lost.
We are subject to governmental regulations, including environmental and health and safety regulations.
Our business operations are subject to a variety of national, state and local laws and regulations, many of which deal with the environment and health and safety issues. We believe we are in material compliance with applicable environmental and worker health and safety requirements. However, material future expenditures may be necessary if compliance standards change or material unknown conditions that require remediation are discovered. If we fail to comply with present and future environmental and worker health and safety laws and regulations, we could be subject to future liabilities or interruptions in our operations, which could have a material adverse effect on our business.
The markets in which we sell our products are highly competitive.
The markets for our products are highly competitive on a global basis, with many companies having significantly greater resources and market share than us. Many of our competitors maintain a significantly higher level of brand recognition than we do. Their access to greater resources enables them to adapt more quickly to changes in the markets we have targeted. Our competitors are able to devote greater resources to the development and sale of new products. Most of the products we have developed have not obtained broad market acceptance and rely on our emerging technology. To improve our competitive position, we will need to make significant ongoing investments in manufacturing, customer service and support, marketing, sales, research and development and intellectual property protection. We do not know if we will have sufficient resources to continue to make such investments or if we will maintain or improve our competitive position within the markets we serve.
We attempt to protect the critical elements of our proprietary technology as trade secrets. Because of our reliance on trade secrets, we are unable to prevent third parties from independently developing technologies that are similar or superior to our technology or from successfully reverse engineering or otherwise replicating our technology.
In certain cases, where the disclosure of information required to obtain a patent would divulge critical proprietary data, we may choose not to patent elements of our proprietary technology and processes which we have developed or may develop in the future and instead rely on trade secret laws to protect certain elements of our proprietary technology and processes. For example, we rely on trade secrets to protect our key polyurethane formulations. These formulations are critical elements of and central to our proprietary technology. Our trade secrets could be compromised by third parties, or intentionally or accidentally by our employees. It is also possible that others will independently develop technologies that are similar or superior to our technology. Third parties may also legally reverse engineer our products. Independent development, reverse engineering, or other legal copying of those elements of our proprietary technology that we attempt to protect as trade secrets could enable third parties to benefit from our technologies without compensating us. The protection of proprietary technology through claims of trade secret status has been the subject of increasing claims and litigation by various companies both in order to protect proprietary rights as well as for competitive reasons, even when proprietary claims are unsubstantiated. The prosecution of litigation to protect our trade secrets or the defense of such claims is costly and unpredictable given the uncertainty and rapid development of the principles of law pertaining to this area. We may also be subject to claims by other parties with regard to the use of technology information and data that may be deemed proprietary to others. The independent development of technologies that are similar or superior to our technology or the reverse engineering of our products by third parties would have a material adverse effect on our business and results of operations. In addition, the loss of our ability to use any of our trade secrets or other proprietary technology would have a material adverse effect on our business and results of operations. Because trade secrets do not ensure exclusivity and pose such issues with respect to enforcement, third parties may decline to partner with us or may pay lesser compensation for use of our technology which is protected only by trade secrets.
Our business depends on the protection of our patents and other intellectual property and may suffer if we are unable to adequately protect such intellectual property.
Our success and ability to compete are substantially dependent upon our intellectual property. We rely on patent, trademark and copyright laws, trade secret protection and confidentiality or license agreements with our employees, customers, strategic partners and others to protect our intellectual property rights. However, the steps we take to protect our intellectual property rights may be inadequate. There are events that are outside of our control that pose a threat to our intellectual property rights as well as to our products and services. For example, effective intellectual property protection may not be available in every country in which we license our technology or our products are distributed. Also, the efforts we have taken to protect our proprietary rights may not be sufficient or effective. Any impairment of our intellectual property rights could harm our business and our ability to compete. Also, protecting our intellectual property rights is costly and time consuming. Any increase in the unauthorized use of our intellectual property could make it more expensive to do business and harm our operating results. In addition, other parties may independently develop similar or competing technologies designed around any patents that may be issued to us.
We have been granted a number of U.S. patents relating to certain aspects of our manufacturing technology and use of polyurethane to make tires and we may seek further patents on future innovations. Our ability to either manufacture products or license our technology is substantially dependent on the validity and enforcement of these patents and patents pending. We cannot guarantee that our patents will not be invalidated, circumvented or challenged, that patents will be issued for our patents pending, that the rights granted under the patents will provide us competitive advantages or that our current and future patent applications will be granted.
Third parties may invalidate our patents.
Third parties may seek to challenge, invalidate, circumvent or render unenforceable any patents or proprietary rights owned by or licensed to us based on, among other things:
· | subsequently discovered prior art or engineering designs; |
· | lack of entitlement to the priority of an earlier, related application; or |
· | failure to comply with the written description, best mode, enablement or other applicable requirements. |
United States patent law requires that a patent must disclose the “best mode” of creating and using the invention covered by a patent. If the inventor of a patent knows of a better way, or “best mode,” to create the invention and fails to disclose it, that failure could result in the loss of patent rights. Our decision to protect certain elements of our proprietary technologies as trade secrets and to not disclose such technologies in patent applications, may serve as a basis for third parties to challenge and ultimately invalidate certain of our related patents based on a failure to disclose the best mode of creating and using the invention claimed in the applicable patent. If a third party is successful in challenging the validity of our patents, our inability to enforce our intellectual property rights could seriously harm our business.
We may be liable for infringing the intellectual property rights of others.
Our products and technologies may be the subject of claims of intellectual property infringement in the future. Our technologies may not be able to withstand any third-party claims or rights against their use. Any intellectual property claims, with or without merit, could be time-consuming, expensive to litigate or settle, could divert resources and attention and could require us to obtain a license to use the intellectual property of third parties. We may be unable to obtain licenses from these third parties on favorable terms, if at all. Even if a license is available, we may have to pay substantial royalties to obtain it. If we cannot defend such claims or obtain necessary licenses on reasonable terms, we may be precluded from offering most or all of our products or services and our business and results of operations will be adversely affected.
Because our proposed tire products are derived from new technology, our product liability insurance costs will likely increase and we may be exposed to product liability risks that could adversely affect profitability.
Even if tests indicate that our tires meet performance standards, or if we decide to revive our highway tire product program and these tires are approved for use, these products may subject us to significant product liability claims because the technology is new and there is little history of on-road use. Moreover, because our products are and will be used in applications where their failure could result in substantial injury or death, we could also be subject to product liability claims. Introduction of such new products and increased use of our existing products will most likely increase our product liability premiums and defense of potential claims could increase insurance costs even further, which could substantially increase our expenses. Any insurance we obtain may not be sufficient to cover the losses incurred through such lawsuits.
Significant increases in the price of chemical raw materials, steel and other raw materials used in our products could increase our production costs and decrease our profit margins or make our products less competitive in the marketplace due to price increases.
The materials used to produce our products are susceptible to price fluctuations due to supply and demand trends, the economic climate and other unforeseen trends. With respect to both polyols and isocyanates, worldwide demand is increasing and may exceed current capacity. If we are successful in implementing our business strategy, the quantities of chemical raw materials required by us or by others that utilize our technology may increase significantly. Shortages, if any, may result in chemical price increases. We have experienced increases in the cost of wheel components due to the increased cost of steel, but no supply delays or shortages. However, we anticipate that we may experience an increase in steel wheel components at such time as the Chinese government cancels any export rebates it may be currently providing Chinese wheel manufacturers. Our raw materials pricing could increase further in the future. Existing trade agreements with foreign countries may be subject to change in the future, with tariffs or import duties being levied by the US government increasing the cost of our foreign-based raw materials. Because we are introducing products that will compete, in part, on the basis of price, we may be unable to pass cost increases on to our customers. If we are unable to pass on raw material cost increases to our customers, our future results of operations and cash flow will be materially adversely affected.
Our ability to execute our business plan would be harmed if we are unable to retain or attract key personnel.
Our polyurethane technology has been developed by a small team and only a limited number of the members of our management team maintain the technical knowledge to produce our products. Our future success depends, to a significant extent, upon our ability to retain and attract the services of these and other key personnel. The loss of the services of one or more members of our management team could hinder our ability to effectively manage our business and implement our growth strategies. Finding suitable replacements could be difficult, and competition for such personnel of similar experience is intense. We do not carry key person insurance on any of our officers.
Shareholders and potential investors may experience some difficulty trading our stock since it is only quoted on the OTCQB Marketplace.
Our common stock is quoted on the OTCQB Marketplace. As a result, secondary trading of our shares may be subject to certain state imposed restrictions and the ability of individual stockholders to trade their shares in a particular state may be subject to various rules and regulations of that state. A number of states require that an issuer's securities be registered in their state or appropriately exempted from registration before the securities are permitted to trade in that state. Further, our shares may be subject to the provisions of Section 15(g) and Rule 15g-9 of the Exchange Act, commonly referred to as the "penny stock" rule. Broker-dealers who sell penny stocks to persons other than established customers and accredited investors (generally persons with assets in excess of $1,000,000, excluding the value of a principal residence, or annual income exceeding $200,000 by an individual, or $300,000 together with his or her spouse), are subject to additional sales practice requirements.
For transactions covered by these rules, broker-dealers must make a special suitability determination for the purchase of such securities and must have received the purchaser's written consent to the transaction prior to the purchase. Additionally, for any transaction involving a penny stock, unless exempt, the rules require the delivery, prior to the first transaction, of a risk disclosure document relating to the penny stock market. A broker-dealer also must disclose the commissions payable to both the broker-dealer and the registered representative, and current quotations for the securities. Finally, monthly statements must be sent to clients disclosing recent price information for the penny stocks held in the account and information on the limited market in penny stocks. Consequently, these rules may restrict the ability of broker-dealers to trade and/or maintain a market in our common stock and may affect the ability of stockholders to sell their shares.
As of June 30, 2016, we did not have any unresolved comments with the staff of the Securities and Exchange Commission.
In May 2015, we negotiated a five (5) year extension of the lease on our executive office and manufacturing facility located at 1501 Industrial Road, Boulder City, Nevada. The property consists of a 49,200 square foot building. We currently occupy all 49,200 square feet, inclusive of approximately 5,500 square feet of office space, situated on approximately 4.15 acres. The extended lease commenced on July 1, 2015 for the base rent as follows:
· | July 1, 2015 to June 30, 2016: $11,300 |
· | July 1, 2016 to June 30, 2017: $11,400 |
· | July 1, 2017 to June 30, 2018: $11,500 |
· | July 1, 2018 to June 30, 2019: $11,500 |
· | July 1, 2019 to June 30, 2020: $11,500 |
All other terms and conditions of the building lease remain in effect.
As of June 30, 2016, we were not involved in any legal proceedings.
Not applicable.
PART II
ITEM 5. MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Our common stock is quoted on the OTCQB Maketplace ("OTC"). The following table sets forth for the periods indicated the high and low sale prices of our common stock. Prices represent inter-dealer quotations without adjustment for retail markups, markdowns or commissions and may not represent actual transactions.
Fiscal year ended June 30,
|
High
|
Low
|
||||||
|
||||||||
2016
|
||||||||
Fourth Quarter
|
$
|
0.04
|
$
|
0.04
|
||||
Third Quarter
|
$
|
0.07
|
$
|
0.04
|
||||
Second Quarter
|
$
|
0.05
|
$
|
0.03
|
||||
First Quarter
|
$
|
0.10
|
$
|
0.07
|
2015
|
||||||||
Fourth Quarter
|
$
|
0.05
|
$
|
0.02
|
||||
Third Quarter
|
$
|
0.08
|
$
|
0.02
|
||||
Second Quarter
|
$
|
0.08
|
$
|
0.03
|
||||
First Quarter
|
$
|
0.09
|
$
|
0.03
|
The closing price of our common stock on the OTC on September 15, 2016 was $0.03 per share. As of September 15, 2016, there were approximately 485 holders of record of our common stock and 42,325,287 shares of common stock outstanding based on information provided by our transfer agent, Interwest Transfer Company, 1981 E. Murray-Holladay Road, Holladay, Utah 84117.
Dividends
We have not paid any dividends on our common stock since our inception and do not anticipate paying any dividends in the foreseeable future. Any future determination to pay dividends will be at the discretion of our Board of Directors and will be dependent upon then-existing conditions, including our financial condition, results of operations, contractual restrictions, capital requirements, business prospects and other factors our Board of Directors deems relevant.
We are a “Smaller Reporting Company” as defined under §229.10(f)(1) of Regulation S-K and are not required to provide the information required by this Item.
This discussion and analysis contains statements of a forward-looking nature relating to future events or our future financial performance or financial condition. Such statements are only predictions and the actual events or results may differ materially from the results discussed in or implied by the forward-looking statements. Factors that could cause or contribute to such differences include, but are not limited to, those discussed in "Part I. Item 1A. Risk Factors" as well as those discussed elsewhere in this report. The historical results set forth in this discussion and analyses are not necessarily indicative of trends with respect to any actual or projected future financial performance. This discussion and analysis should be read in conjunction with the financial statements and the related notes thereto included elsewhere in this report.
Overview
Amerityre engages in the research and development, manufacturing and sale of polyurethane tires. We believe that we have developed unique polyurethane formulations that allow us to make products with superior performance characteristics, including abrasion resistance, energy efficiency and load-bearing capabilities, when compared to conventional rubber tires. We also believe that our manufacturing processes are more energy efficient than the traditional rubber tire manufacturing processes, in part because our polyurethane compounds do not require the multiple processing steps, extreme heat, and high pressure that are necessary to cure rubber. Using our polyurethane technologies, we believe tires can be produced which last longer, are less susceptible to failure and are friendly to the environment.
We are concentrating on three segments of the tire market: closed-cell polyurethane foam tires, polyurethane elastomer tires and agricultural tires. Our focus continues to be applications and markets where our advantages in product technology give us an opportunity to provide unique products and obtain premium pricing. Our most recent activities in these areas are set forth below:
Closed-Cell Polyurethane Tires – The sale of polyurethane foam tires to original equipment manufacturers, distributors and dealers accounts for the majority of our revenue. We have the ability to produce a broad range of products for the light duty tire market. Our efforts in product development and marketing allow us to continue to build customer relationships and expand sales with original equipment manufacturers and tire distributors. We continue our focus on creating unique product solutions for customers with specific tire performance requirements. Some of our international customers have had reduced sales levels over the year, negatively impacted by the strong US dollar exchange rate versus foreign currencies.
Polyurethane Elastomer Tires – During the fourth quarter of FY 2016 we relaunched the forklift tire product line with select customers. The rollout has been slower than expected and we await feedback from these initial customers on their satisfaction with our forklift tires before committing resources to a larger rollout campaign. We are also developing new elastomer tire products for specific customer applications, such as scissor lift tires. We expect sales in this market segment to increase in the coming quarters as these new products are introduced and gain market acceptance.
Agricultural Tires – Sales of agricultural tires continue to be negatively impacted by the dramatic downturn in farm commodity prices, which has in turn reduced farm income levels and available money for investment in farm equipment. Recent projections of crop yield and prices for this year indicate that farm income will continue to suffer in the coming months. Large agricultural equipment suppliers continue to expect 2017 to be a challenging year for farmer income and farm-related spending. Despite growing market acceptance of the benefits of our pivot tire and seeder tire technologies, financial considerations have continued to force potential agricultural tire customers to delay purchases. Given this backdrop, we are not anticipating dramatic agricultural sales gains for FY 2017 compared to FY 2016. We continue to pursue additional distribution relationships, both domestically and internationally, to increase our market penetration for our agricultural tires. We have found that the strength of the US Dollar versus other foreign currencies has negatively impacted our international business. We expect that exchange rate effects will continue to dampen our international sales efforts in the coming quarters. We have continued development of new seeder tire styles in response to specific customer requirements, and we expect this will help drive additional sales in this product line.
Due to the Company’s limited resources, tire projects which are contingent on additional significant development, such as composite and automotive tires, have been put on hold and will be revisited at a later date.
As described above, our product line covers diverse market segments which are unrelated in terms of customer base, product, distribution, market demands and competition. Our sales team is comprised of three independent manufacturer representatives whose experience is complementary to our product portfolio plus our in-house sales department. The Company’s emphasis on proper product pricing and new marketing campaigns continues to drive more profitable sales, as shown by our profitable FY 2016 third and fourth quarter results. We continue to have a solid backlog for orders to be delivered over the next 12 months. However, we expect that the challenging economic environment, particularly in the agricultural market, will continue to provide strong headwinds and negatively impact our drive towards consistent and increasing profitability.
During our Annual Meeting in December 2015, the Company’s Senior Management outlined its strategic plan for increasing the Company’s sales, profitability, and market awareness. At that time Management expressed the need for additional working capital in order to execute its plan in a timely manner. In the absence of additional capital, it was stated that any initiatives would need to be paid from internally generated cash flow. During the fiscal Q4, the Company was successful in procuring a term loan to finance needed investments in manufacturing equipment, laboratory instruments, and website development. However, a lack of available capital prevented the Company from executing its other strategic marketing initiatives, which we believe has negatively impacted the Company’s market position and profitability. Without additional capital in FY 2017, the implementation of the Company’s strategic plan will be delayed unless it can be financed out of internally generated cash flow.
Factors Affecting Results of Operations
Our operating expenses consisted primarily of the following:
· | Cost of sales, which consists primarily of raw materials, components and production of our products, including applied labor costs and benefits expenses, maintenance, facilities and other operating costs associated with the production of our products; |
· | Selling, general and administrative expenses, which consist primarily of salaries, commissions and related benefits paid to our employees and related selling and administrative costs including professional fees; |
· | Research and development expenses, which consist primarily of contractor and direct labor conducting research and development, equipment and materials used in new product development and product improvement using our technologies; |
· | Consulting expenses, which consist primarily of amounts paid to third-parties for outside services; |
· | Depreciation and amortization expenses which result from the depreciation of our property and equipment, including amortization of our intangible assets; and |
· | Stock based compensation expense related to stock and stock option awards issued to employees and consultants for services performed for the Company. |
Critical Accounting Policies
Our discussion and analysis of our financial condition and results of operations are based upon our financial statements, which have been prepared in accordance with United States generally accepted accounting principles. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses. On an ongoing basis, we evaluate our estimates, including those related to uncollectible receivables, inventory valuation, deferred compensation and contingencies. We base our estimates on historical performance and on various other assumptions that we believe to be reasonable under the circumstances. These estimates allow us to make judgments about the carrying values of assets and liabilities that are not readily apparent from other sources.
We believe the following accounting policies are our critical accounting policies because they are important to the portrayal of our financial condition and results of operations and they require critical management judgments and estimates about matters that may be uncertain. If actual results or events differ materially from those contemplated by us in making these estimates, our reported financial condition and results of operations for future periods could be materially affected.
Revenue Recognition
Revenue for products is recognized when the sales amount is determined, shipment of goods to the customer has occurred and collection is reasonably assured. Generally, we ship all of our products FOB origination.
Valuation of Intangible Assets and Goodwill
Patent and trademark costs have been capitalized at June 30, 2016, totaling $479,633 with accumulated amortization of $304,254 for a net book value of $175,379. Patent and trademark costs capitalized at June 30, 2015, totaled $479,633 with accumulated amortization of $276,923 for a net book value of $202,710.
The patents which have been granted are being amortized over a period of 20 years. Patents which are pending or are being developed are not amortized. Amortization begins once the patents have been issued. As of June 30, 2016 and 2015, respectively, there were no pending patents. Annually, pending or expired patents are inventoried and analyzed, which resulted in the recognition of a loss on abandonment, expiration or retirement of patents and trademarks of $-0- and $56,283 for the years ended June 30, 2016 and 2015, respectively.
Amortization expense for the years ended June 30, 2016 and 2015 was $27,331 and $31,954 respectively. The Company evaluates the recoverability of intangibles and reviews the amortization period on a continual basis utilizing the guidance of Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 350, Intangibles – Goodwill and Other. We consider the following indicators, among others, when determining whether or not our patents are impaired:
· | any changes in the market relating to the patents that would decrease the life of the asset; |
· | any adverse change in the extent or manner in which the patents are being used; |
· | any significant adverse change in legal factors relating to the use of the patents; |
· | current period operating or cash flow loss combined with our history of operating or cash flow losses; |
· | future cash flow values based on the expectation of commercialization through licensing; and |
· | current expectations that, more likely than not, the patents will be sold or otherwise disposed of significantly before the end of its previously estimated useful life. |
Inventory
Inventory is stated at the lower of cost (computed on a first-in, first-out basis) or market. The cost of finished goods includes the cost of raw material, direct and indirect labor, and other indirect manufacturing costs. The inventory consists of chemicals, finished goods produced in the Company’s plant and products purchased for resale.
Financial and Derivative Instruments
The Company periodically enters into financial instruments. Upon entry, each instrument is reviewed for debt or equity treatment. In the event that the debt or equity treatment is not readily apparent, FASB ASC 480-10-S99 is consulted for temporary treatment. Once an event takes place that removes the temporary element the Company appropriately reclassifies the instrument to debt or equity.
The Company periodically assesses its financial and equity instruments to determine if they require derivative accounting. Instruments which may potentially require derivative accounting are conversion features of debt, equity, and common stock equivalents in excess of available authorized common shares, and contracts with variable share settlements. In the event of derivative treatment, we mark the instrument to market.
Stock-Based Compensation
We account for stock-based compensation under the provisions of FASB ASC 718, Compensation – Stock Compensation. Our financial statements as of and for the fiscal years ended June 30, 2016 and 2015 reflect the impact of FASB ASC 718. Stock-based compensation expense recognized under FASB ASC 718 for the fiscal years ended June 30, 2016 and 2015 was $68,805 and $23,706, respectively, related to employee stock options and employee stock grants.
FASB ASC 718 requires companies to estimate the fair value of share-based payment awards on the date of grant using an option-pricing model. The value of the portion of the award that is ultimately expected to vest is recognized as expense over the requisite service periods in our Statement of Operations. Stock-based compensation expense recognized in our Statements of Operations for fiscal years ended June 30, 2016 and 2015 assume all awards will vest; therefore no reduction has been made for estimated forfeitures.
Results of Operations
Our management reviews and analyzes several key performance indicators in order to manage our business and assess the quality and potential variability of our sales and cash flows. These key performance indicators include:
· | Net sales, which consist of product sales; |
· | Sales, net of returns and trade discounts, which is an indicator of our overall business growth and the success of our sales and marketing efforts; |
· | Gross profit, which is an indicator of both competitive pricing pressures and the cost of goods sold of our products and the mix of product and license fees, if any; |
· | Growth in our customer base, which is an indicator of the success of our sales efforts; and |
· | Distribution of sales across our products offered. |
The following summary table presents a comparison of our results of operations for the fiscal years ended June 30, 2016 and 2015 with respect to certain key financial measures. The comparisons illustrated in the table are discussed in greater detail below.
|
Percent
|
|||||||||||
|
Fiscal Year Ended June 30,
|
Change
|
||||||||||
|
(in 000’s)
|
|||||||||||
|
2016
|
2015
|
2016 vs. 2015
|
|||||||||
Net revenues
|
$
|
3,781
|
$
|
4,794
|
(21.1
|
)% | ||||||
Cost of revenues
|
(2,670
|
)
|
(3,515
|
)
|
(24.0
|
)% | ||||||
Gross profit
|
1,111
|
1,279
|
(13.1
|
)% | ||||||||
Research and development expenses
|
(222
|
)
|
(201
|
)
|
10.4
|
% | ||||||
Sales and marketing expense
|
(286
|
)
|
(557
|
)
|
(48.7
|
)% | ||||||
General and administrative expense (1)
|
(843
|
)
|
(819
|
)
|
2.8
|
% | ||||||
Gain on extinguishment of long term payable
|
-
|
63
|
(100.0
|
)% | ||||||||
Loss on sales of assets
|
-
|
(63
|
)
|
(100.0
|
)% | |||||||
Other expense
|
(3
|
)
|
(1
|
)
|
204.0
|
% | ||||||
Net loss
|
(243
|
)
|
(299
|
)
|
(19.1
|
)% | ||||||
Preferred stock dividend
|
(100
|
)
|
(100
|
)
|
(0.0
|
)% | ||||||
Net loss attributable to common shareholders
|
$
|
(343
|
)
|
$
|
(399
|
)
|
(14.3
|
)% |
(1) Includes stock-based compensation expense of $68,805 and $23,706 for the fiscal years ended June 30, 2016 and 2015, respectively.
Year Ended June 30, 2016 Compared to the Year Ended June 30, 2015
Net revenues. Net revenues of $3,781,199 for the year ended June 30, 2016, represents a $ 1,012,538 or 21.1% decrease over net revenues of $4,793,737 the year ended June 30, 2015. These results were not in line with our expectations as we anticipated that we would have stronger pivot tire sales for the period. Our sales were driven primarily by closed cell foam tire sales. We continue to have a positive response to our marketing and pricing plans for our polyurethane foam tires, which has helped to maintain our sales backlog level. Our forecast for the fiscal 2017 anticipates continued depressed agricultural tire sales, due to the continuation of depressed farm income. We expect our polyurethane foam products to constitute the majority of our sales during the upcoming fiscal year.
Cost of revenues. Cost of revenues for the year ended June 30, 2016 was $ 2,670,442 or 70.6% of revenues compared to $3,514,608 or 73.3% of revenues for the year ended June 30, 2015. Cost of revenues were lower due to decreases in raw materials cost and overhead costs (specifically lower depreciation expense and manufacturing supply cost) partially offset by higher repairs and maintenance including manufacturing equipment repairs, when compared to the prior period. Starting July 1, 2015 the Company modified its customer freight policy, providing savings of approximately $116,000 for the year to date period. The Company continues to maintain sufficient production capacity to meet anticipated customer demand without incurring a proportionate increase in overall production costs.
Gross profit. Gross profit for the year ended June 30, 2016 of $ 1,110,757 represents a 13.1% decrease over gross profit of $1,279,129 for the year ended June 30, 2015. The fiscal 2016 gross profit reflects a 29.4% gross margin for product sales compared to a gross margin on product sales of 26.7% for fiscal 2015.
Research and development expenses. Research and development expenses for the year ended June 30, 2016 were $222,094, a 10.6% increase in the research and development expenses for the year ended June 30, 2015 of $200,753. The $21,341 increase between periods is due to a full year of having a part-time chemist on site offset by salaries, as we continue to focus on product formulation research and product development. The Company plans to continue this level of expenditure as R&D is a key component of the company new product and business improvement initiatives.
Sales and marketing expenses. Sales and marketing expense of $285,831for the year ended June 30, 2016 represents a 48.7% decrease over the same expenses of $556,843 for the year ended June 30, 2015. Sales and marketing expenses decreased $271,012 between periods primarily due to lower travel costs, fewer trade show expenses, a reduction in outside sales representatives during FY 2016 (from 3 to 2), lower print advertising expense and the effect of the Company’s revised sales commission program. All other expenses were generally consistent between periods.
General and administrative expenses. General and administrative expenses of $842,859 for the year ended June 30, 2016 represent a 2.8% increase over the same expense of $819,899 for the year ended June 30, 2015. General and administrative expenses increased $22,960 between periods primarily due to increases in salaries, stock based compensation, legal fees, and warranty expense offset by savings in consulting and professional expenses, and director travel expense. All other expenses were generally consistent between periods.
Other Income/ (Expense). Other expense for the year ended June 30, 2016 was $3,025 compared to $995 for the year ended June 30, 2015. In July 2015, the Company leased equipment resulting in $2,404 in interest expense for the year while the Company had no interest expense in the same period in 2015. Additionally, in the prior period we were able to write off a long term payable under the Nevada Statute of Limitations which offset the prior year loss on asset disposals, both of which are non-reoccurring transactions.
Net loss. The net loss for the year ended June 30, 2016 of $243,052 represents a 19.1% decrease from the net loss for the year ended June 30, 2015 of $299,361. However, net loss to common shareholders, which includes the impact of the preferred share dividend, was $343,052, representing a 14.3% decrease when compared to the same period in 2015.
The following summary table presents a comparison of our results of operations for the three months ended June 30, 2016 and 2015 with respect to certain key financial measures. The following analysis is provided so that a reader of this management discussion and analysis can see the known trends discussed in other areas of this Item 7 and enable the reader to compare quarterly data provided in the Company’s interim financial reporting throughout fiscal year 2016:
|
Percent
|
|||||||||||
|
Three Mos. Ended June 30,
|
Change
|
||||||||||
|
(in 000’s)
|
|||||||||||
|
2016
|
2015
|
2016 vs. 2015
|
|||||||||
Net revenues
|
$
|
916
|
$
|
1,222
|
(25.0
|
)% | ||||||
Cost of revenues
|
(589
|
)
|
(826
|
)
|
(28.7
|
)% | ||||||
Gross profit
|
327
|
396
|
(17.4
|
)% | ||||||||
Research and development expenses
|
(56 | ) | (45 | ) | 24.4 | % | ||||||
Sales and marketing expense
|
(66
|
)
|
(130
|
)
|
(49.2
|
)% | ||||||
General and administrative expense (1)
|
(176
|
)
|
(182
|
)
|
(2.8
|
)% | ||||||
Gain on extinguishment of long term payable
|
-
|
63
|
(100
|
)% | ||||||||
Loss on sales of assets
|
-
|
(63
|
)
|
(100
|
)% | |||||||
Net income
|
29
|
39
|
(25.6
|
)% | ||||||||
Preferred stock dividend
|
(25
|
)
|
(25
|
)
|
0.0
|
% | ||||||
Net income attributable to common shareholders
|
$
|
4
|
$
|
14
|
(71.4
|
)% |
(1) Includes stock-based compensation expense of $12,568 and $5,068 for the three months ended June 30, 2016 and 2015, respectively.
Additionally, although our sales no longer show strong seasonality trends, the first quarter of each of our fiscal years has traditionally been our weakest quarter and we do not anticipate this trend to change in 2017. The primary driver for this weakness is lower pivot tire sales during crop growing season.
Liquidity and Capital Resources
Our principal sources of liquidity consist of cash and payments received from our customers. We do not have any significant revolving credit arrangements. Historically, our expenses have exceeded our sales, resulting in operating losses. From time to time, we have obtained additional liquidity to fund our operations through the sale of shares of our common stock and the placement of short-term debt instruments. At the end of 2016, we were able to obtain term bank debt financing to finance critical manufacturing equipment and operating enhancements which will be placed in service in early fiscal year 2017. Management continues to evaluate financing options but is choosing to delay financing at terms that will subject the Company to high costs of debt and are reluctant to raise money through stock sales at what we believe are highly dilutive share prices. Additionally, management has notified our preferred shareholder that we will be suspending future payments of their preferred cash dividend payments, so the Company can increase its working capital levels.
We have historically not succeeded in establishing favorable revolving short term financing such as lines of credit. In the quarter ended March 31, 2015, we entered into a short term receivable factoring agreement with a third party to sell our receivable invoices. This agreement enables us to sell individual customer invoices for faster cash flow to the Company as we deem needed. As of June 30, 2016 we have not needed to activate this financing option due to increased focus on adherence to established collection policies and proactive communication with repeat customers, including adjusting credit limits to allow for increased sales volume where warranted.
Cash Flows
The following table sets forth our cash flows for the fiscal years ended June 30, 2016 and 2015.
|
Years ended June 30,
|
|||||||
|
(in 000’s)
|
|||||||
|
2016
|
2015
|
||||||
Net cash used in operating activities
|
$
|
(74
|
)
|
$
|
(118
|
)
|
||
Net cash used in investing activities
|
(8
|
)
|
(52
|
)
|
||||
Net cash used in financing activities
|
(106
|
)
|
(103
|
)
|
||||
Net decrease in cash and cash equivalents during period
|
$
|
(188
|
)
|
$
|
(273
|
)
|
Net Cash Used By Operating Activities. Our primary sources of operating cash during fiscal 2016 came from timely collection of accounts receivable and sales of inventory, offset by an increased prepaid balances and payments on vendor accounts at June 30, 2016. Net cash used by operating activities was $74,223 for the year ended June 30, 2016 compared to $118,210 for the same period in 2015.
Non-cash items include depreciation and amortization, and stock based compensation. Our net loss was $243,052 for the year ended June 30, 2016 compared to a net loss of $299,361 for the same period in 2015. The net loss for fiscal 2016 included non-cash expenses for stock-based compensation (both stock issued and options) of $68,805. In fiscal 2015, stock-based compensation (both stock issued and options) totaled $28,853, loss on disposal of assets was $62,731 offset by a gain on extinguishment of long term debt of $62,500.
Net Cash Used In Investing Activities. Net cash used by investing activities was $7,642 for the year ended June 30, 2016 and $52,065 for the same period in 2015. The primary use of cash from investing activities for the year ended June 30, 2016 relates to the Nevada sales tax portion of prior acquisitions of property and equipment of $7,642.
Net Cash Provided by Financing Activities. During both fiscal years ended June 30, 2016 and 2015, respectively, the primary use of cash for financing activities was the dividend related to our 2013 Series Convertible Preferred Stock issuance. In July 2015, the Company leased equipment resulting in $4,694 in lease liability payments for the year while the Company had no such transactions in the same period in 2015.
Contractual Obligations and Commitments
The following table summarizes our contractual cash obligations and other commercial commitments at June 30, 2016.
|
Payments due by period
|
|||||||||||||||||||
|
Total
|
Less than
1 year
|
1 to 3 years
|
3 to 5 years
|
After
5 years
|
|||||||||||||||
|
||||||||||||||||||||
Facility lease (1)
|
$
|
550,800
|
$
|
136,800
|
$
|
414,000
|
$
|
-
|
$
|
-
|
||||||||||
Capital lease (2)
|
18,120
|
8,697
|
9,422
|
-
|
-
|
|||||||||||||||
Bank debt (3)
|
92,956
|
19,570
|
64,046
|
9,340
|
-
|
|||||||||||||||
Total contractual cash obligations
|
$
|
661,876
|
$
|
165,067
|
$
|
487,468
|
$
|
9,340
|
$
|
-
|
(1)
|
In May 2015, we negotiated a five (5) year extension of the lease on our executive office and manufacturing facility located at 1501 Industrial Road, Boulder City, Nevada. The property consists of a 49,200 square foot building. We currently occupy all 49,200, inclusive of approximately 5,500 square feet of office space, situated on approximately 4.15 acres. All other terms and conditions of the building lease remain in effect.
|
(2)
|
In July 2015 we entered into a capital lease for research and development equipment for $19,337.
|
(3)
|
In June and July 2016, in two separate bank promissory notes, we financed critical manufacturing equipment and operating enhancements which will be placed in service in early fiscal year 2017.
|
Cash Position, Outstanding Indebtedness, and Future Capital Requirements
At September 15, 2016, our total cash balance was $197,704, none of which is restricted; accounts receivables was $327,440; and inventory, net of reserves for slow moving or obsolete inventory, and other current assets was $926,948. Our total indebtedness was $515,207 and includes $244,026 in accounts payable, $101,470 in accrued expenses, $17,057 in current portion of long-term debt, $100,309 in capital lease liability and $83,253 in long-term debt.
We have been working during the past year to improve our liquidity and access to capital resources. In order to execute the strategic business plan discussed during our shareholder meeting in December 2015, we require more capital resources. We will continue to pursue potential opportunities to secure short-term loans, long-term bank financing, revolving lines of credit with banking institutions and equity based transactions with interested financial firms and strategic industry partners in our effort to improve the Company’s financial position and enhance shareholder value.
Over the past year, we have been working on various proposals to secure short-term loans as well as long-term bank financing and equity based investments. The Company currently does not have an existing revolving credit facility but we were able to obtain term bank debt financing at the end of 2016 to finance critical manufacturing equipment and operating enhancements which will be placed in service in early fiscal year 2017. Over the past year, we have worked with our vendors to obtain extended credit terms and increase credit lines where needed. Additionally, we continue to focus on adherence to established collection policies and proactive communication with repeat customers, including adjusting credit limits to allow for increased sales volume where warranted.
We are intent on focusing on the sale and distribution of profitable product lines. Management continues to look for further financing facilities at affordable terms that will allow the Company to maintain sufficient raw material and finished goods inventory to capitalize on sales growth opportunities. We are limiting our capital expenditures to that required to maintain current manufacturing capability or support business initiatives identified in our strategic sales plan. We continue to work to reduce our overall costs wherever possible.
To help address our cash resources which at times may be limited, we are in discussions with various third parties about potential opportunities to license our technology which we believe will bring in additional cash flows. We are in discussions with banks and other lenders regarding establishing a line of credit for short term cash needs, however at this time we have not succeeded in establishing such a line of credit. Lastly, we have entered into a short term receivable factoring agreement with a third party to sell our receivable invoices. This agreement enables us to sell individual customer invoices for faster cash flow to the Company as we deem needed.
Management continues to execute its strategic plan focusing on “Profitability as a Mindset”. The Company’s emphasis on proper product pricing and new marketing campaigns has driven more profitable sales. Improvement in results has continued and the Company has been successful in reducing its required breakeven sales level. The recent quarterly results saw record quarterly profit levels for the Company. We believe our program to establish “Profitability as a Mindset” is a success and we are committed to continuing these efforts.
In assessing our liquidity, management reviews and analyzes our current cash, accounts receivable, accounts payable, capital expenditure commitments and other obligations. In connection with the preparation of our financial statements for the period ended June 30, 2016, we have analyzed our cash needs for the next twelve months. We have concluded that our available cash and accounts receivables are sufficient to meet our current minimum working capital, capital expenditure and other cash requirements for this period. However, to expand manufacturing and sales operations beyond the current level, additional capital may be required.
The Company has, on occasion, instituted initiatives to incentivize sales of slower moving inventory through promotional pricing. These programs will continue to be selectively utilized in the upcoming quarters to monetize inventory and improve our cash flow.
As of September 15, 2016 the Company has approximately 6,988,713 shares authorized and available for issuance. Although we are reluctant to raise money through stock sales at what we believe are dilutive share prices, these authorized but unissued and unreserved shares of our common stock can be utilized if necessary to fund the expansion of our manufacturing operations or to obtain additional working capital.
Off-Balance Sheet Arrangements
We do not currently have any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. In addition, we do not engage in trading activities involving non-exchange traded contracts.
We are a “Smaller Reporting Company” as defined under §229.10(f)(1) of Regulation S-K and are not required to provide the information required by this Item.
Our financial statements required by this item are included on the pages immediately following the Index to Financial Statements appearing on page F-1.
On January 11, 2016, HJ & Associates resigned as the independent public accounting firm for the Company.
On January 14, 2016, the Company engaged Haynie & Company as its new independent registered public accounting firm. The change of the Company’s independent registered public accounting firm was approved unanimously by our board of directors.
The Company maintains disclosure controls and procedures that are designed to ensure that information required to be disclosed in our reports under the Securities Exchange Act of 1934, as amended, is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and that such information is accumulated and communicated to our management, including our Chief Executive and Financial Officer, as appropriate, to allow timely decisions regarding required disclosure. In designing and evaluating the disclosure controls and procedures, management recognized that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving the desired control objectives, and management necessarily was required to apply its judgment in evaluating the cost-benefit relationship of possible controls and procedures.
As required by SEC Rule 13a-15(b), an evaluation was performed under the supervision and with the participation of our management, including our Chief Executive and Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934) as of the end of the period covered by this report. Based upon that evaluation, our management, including our Chief Executive and Financial Officer, concluded that the design and operation of these disclosure controls and procedures were effective at the reasonable assurance level. There has been no change in our internal controls over financial reporting during our most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal controls over financial reporting.
MANAGEMENT’S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING
The Company’s management is responsible for the preparation and integrity of our published financial statements. The financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America and, accordingly, include amounts based on judgments and estimates made by our management. The Company’s management also prepared the other information included in the annual report and is responsible for its accuracy and consistency with the financial statements.
The Company’s management is responsible for establishing and maintaining a system of internal control over financial reporting, which is intended to provide reasonable assurance to our management and the Board of Directors regarding the reliability of our financial statements. The system includes but is not limited to:
· | a documented organizational structure and division of responsibility; |
· | established policies and procedures, including a code of conduct to foster a strong ethical climate which is communicated throughout the company; |
· | regular reviews of our financial statements by qualified individuals; and |
· | the careful selection, training and development of our people. |
There are inherent limitations in the effectiveness of any system of internal control, including the possibility of human error and the circumvention or overriding of controls. Also, the effectiveness of an internal control system may change over time. We have implemented a system of internal control that was designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements in accordance with generally accepted accounting principles.
The Company’s management has assessed our internal control system in relation to criteria for effective internal control over financial reporting described in “Internal Control-Integrated Framework” issued by the Committee of Sponsoring Organizations (COSO) of the Treadway Commission. Based on its assessment, the Company’s management has concluded that, as of June 30, 2016, the Company’s system of internal controls over financial reporting was effective to provide reasonable assurance based on those criteria. The Company used the 2013 version of the COSO framework.
This annual report does not include an attestation report of the Company's registered public accounting firm regarding internal control over financial reporting. Management's report was not subject to attestation by the Company's registered public accounting firm pursuant to rules of the Securities and Exchange Commission that permit the company to provide only management's report in this annual report.
None.
PART III
The information called for by Part III of Form 10-K (Item 10—Directors, Executive Officers and Corporate Governance of the Registrant, Item 11—Executive Compensation, Item 12—Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters, Item 13—Certain Relationships and Related Transactions, and Director Independence, and Item 14—Principal Accounting Fees and Services) is incorporated by reference from our Proxy Statement related to our 2016 Annual Meeting of Shareholders, which will be filed with the Securities and Exchange Commission not later than October 28, 2016 (120 days after the end of the fiscal year covered by this Annual Report on Form 10-K).
PART IV
(a) Documents filed with this report.
1. Financial Statements:
See Index to Financial Statements on page F-1
2. Financial Statement Schedules:
Financial statement schedules are omitted because they are not required or are not applicable or the required information is shown in the financial statements or notes thereto.
3. Exhibits:
The exhibits to this report are listed on the Exhibit Index below.
(b) Description of exhibits
Exhibit
|
|
|
Number
|
|
Description
|
3.1
|
|
Articles of Incorporation of the Company (incorporated by reference to Exhibit 3.01 to our registration statement on Form 8-A12G (File No. 000-50053)).
|
3.2
|
|
Certificate of Amendment to the Articles of Incorporation of the Company (incorporated by reference to Exhibit 3(i) in our Form 10Q for the quarter ended December 31, 2014 (File No. 000-50053)).
|
3.3
|
|
Bylaws of the Company (incorporated by reference to our Form 8K dated September 25, 2014 (File No. 000-50053).
|
31.1
|
|
|
31.2
|
|
|
32.1
|
|
|
32.2
|
|
|
|
|
|
101 INS
|
|
XBRL Instance Document
|
|
|
|
101 SCH
|
|
XBRL Taxonomy Extension Schema Document
|
|
|
|
101 CAL
|
|
XBRL Taxonomy Extension Calculation Linkbase Document
|
|
|
|
101 DEF
|
|
XBRL Taxonomy Extension Definition Linkbase Document
|
|
|
|
101 LAB
|
|
XBRL Taxonomy Extension Label Linkbase Document
|
|
|
|
101 PRE
|
|
XBRL Taxonomy Extension Presentation Linkbase Document
|
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
Dated: September 23, 2016
AMERITYRE CORPORATION
|
|
|
|
By:
|
|
|
|
/s/ Michael F. Sullivan
|
|
/s/ Lynda R. Keeton-Cardno
|
|
Michael F. Sullivan
Chief Executive Officer
(Principal Executive Officer)
|
|
Lynda R. Keeton-Cardno
Chief Financial Officer
(Principal Financial and Accounting Officer)
|
|
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities indicated on the 23rd day of September 2016.
/s/ Michael F. Sullivan
|
|
/s/ David Clark
|
|
Michael F. Sullivan
Chairman of the Board
|
|
David Clark
Director
|
|
|
|
|
|
/s/ David Hollister
|
|
/s/ George Stoddard
|
|
David Hollister
Director
|
|
George Stoddard
Director
|
|
/s/ Terry Gilland
|
|
|
|
Terry Gilland
Director
|
|
|
AMERITYRE CORPORATION
INDEX TO FINANCIAL STATEMENTS
Audited Financial Statements
|
|
|
|
F-2
|
|
|
|
F-4
|
|
|
|
F-5
|
|
|
|
F-6
|
|
|
|
F-7
|
|
|
|
F-8
|
To the Board of Directors
Amerityre Corporation
Boulder City, Nevada
We have audited the accompanying balance sheet of Amerityre Corporation as of June 30, 2016, and the related statements of operations, stockholders' equity, and cash flows for the year then ended. These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.
In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of Amerityre Corporation as of June 30, 2016, and the results of its operations and its cash flows for the year then ended, in conformity with U.S. generally accepted accounting principles.
/s/ Haynie & Company PC
Salt Lake City, Utah
September 23, 2016
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors
Amerityre Corporation
Boulder City, Nevada
We have audited the accompanying balance sheet of Amerityre Corporation as of June 30, 2015, and the related statements of operations, stockholders' equity, and cash flows for the year then ended. These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.
In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of Amerityre Corporation as of June 30, 2015, and the results of its operations and its cash flows for the year then ended, in conformity with U.S. generally accepted accounting principles.
/s/ HJ & Associates, LLC
Salt Lake City, Utah
August 31, 2015
AMERITYRE CORPORATION
|
June 30, 2016
|
June 30, 2015
|
||||||
ASSETS
|
||||||||
|
||||||||
CURRENT ASSETS
|
||||||||
Cash
|
$
|
267,302
|
$
|
455,717
|
||||
Accounts receivable - net
|
293,358
|
314,054
|
||||||
Accounts receivable - related party - net
|
-
|
6,312
|
||||||
Current Inventory - net
|
614,895
|
650,314
|
||||||
Prepaid and other current assets
|
103,803
|
38,675
|
||||||
Total Current Assets
|
1,279,358
|
1,465,072
|
||||||
|
||||||||
PROPERTY AND EQUIPMENT
|
||||||||
Leasehold improvements
|
153,543
|
153,543
|
||||||
Molds and models
|
577,549
|
572,894
|
||||||
Equipment
|
2,960,246
|
2,937,922
|
||||||
Furniture and fixtures
|
74,921
|
74,921
|
||||||
Construction in progress
|
10,198
|
-
|
||||||
Software
|
305,924
|
305,924
|
||||||
Less – accumulated depreciation
|
(3,849,937
|
)
|
(3,735,744
|
)
|
||||
Total Property and Equipment - net
|
232,444
|
309,460
|
||||||
|
||||||||
OTHER ASSETS
|
||||||||
Patents and trademarks – net
|
175,379
|
202,710
|
||||||
Non-current inventory
|
180,050
|
186,560
|
||||||
Deposits
|
11,000
|
11,000
|
||||||
Total Other Assets
|
366,429
|
400,270
|
||||||
TOTAL ASSETS
|
$
|
1,878,231
|
$
|
2,174,802
|
LIABILITIES AND STOCKHOLDERS’ EQUITY
|
||||||||
|
||||||||
CURRENT LIABILITIES
|
||||||||
Accounts payable and accrued expenses
|
$
|
348,499
|
$
|
438,680
|
||||
Current portion of long-term debt
|
20,518
|
13,608
|
||||||
Current portion of lease liability
|
6,249
|
-
|
||||||
Total Current Liabilities
|
375,266
|
452,288
|
||||||
|
||||||||
Long-term debt
|
100,142
|
53,840
|
||||||
Long-term lease liability
|
8,394
|
-
|
||||||
TOTAL LIABILITIES
|
483,802
|
506,128
|
||||||
|
||||||||
COMMITMENTS AND CONTINGENCIES
|
||||||||
|
||||||||
STOCKHOLDERS’ EQUITY
|
||||||||
Preferred stock: 5,000,000 shares authorized of $0.001 par value, 2,000,000 and 2,000,000 shares issued and outstanding, respectively
|
2,000
|
2,000
|
||||||
Common stock: 75,000,000 shares authorized of $0.001 par value, 42,175,287 and 41,570,287 shares issued and outstanding, respectively
|
42,175
|
41,570
|
||||||
Additional paid-in capital
|
62,579,558
|
62,515,856
|
||||||
Stock payable
|
4,500
|
-
|
||||||
Accumulated deficit
|
(61,233,804
|
)
|
(60,890,752
|
)
|
||||
Total Stockholders’ Equity
|
1,394,429
|
1,668,674
|
||||||
TOTAL LIABILITIES AND STOCKHOLDERS’ EQUITY
|
$
|
1,878,231
|
$
|
2,174,802
|
The accompanying notes are an integral part of these financial statements.
AMERITYRE CORPORATION
|
For the Years Ended June 30,
|
|||||||
|
2016
|
2015
|
||||||
|
||||||||
NET SALES
|
$
|
3,781,199
|
$
|
4,793,737
|
||||
|
||||||||
COST OF REVENUES
|
2,670,442
|
3,514,608
|
||||||
|
||||||||
GROSS PROFIT
|
1,110,757
|
1,279,129
|
||||||
|
||||||||
EXPENSES
|
||||||||
Research and development
|
222,094
|
200,753
|
||||||
Sales and marketing
|
285,831
|
556,843
|
||||||
General and administrative
|
842,859
|
819,899
|
||||||
|
||||||||
Total Expenses
|
1,350,784
|
1,577,495
|
||||||
|
||||||||
LOSS FROM OPERATIONS
|
(240,027
|
)
|
(298,366
|
)
|
||||
|
||||||||
OTHER INCOME/(EXPENSE)
|
||||||||
Interest expense
|
(3,206
|
)
|
-
|
|||||
Gain on extinguishment of long term payable
|
-
|
62,500
|
||||||
Loss on disposal of assets
|
-
|
(62,731
|
)
|
|||||
Other income (expense)
|
181
|
|
(764
|
)
|
||||
|
||||||||
Total Other Expense
|
(3,025
|
)
|
(995
|
)
|
||||
|
||||||||
NET LOSS
|
(243,052
|
)
|
(299,361
|
)
|
||||
|
||||||||
Preferred Stock Dividend
|
(100,000
|
)
|
(100,000
|
)
|
||||
|
||||||||
NET LOSS ATTRIBUTABLE TO COMMON SHAREHOLDERS
|
$
|
(343,052
|
)
|
$
|
(399,361
|
)
|
||
|
||||||||
BASIC AND DILUTED LOSS PER SHARE
|
$
|
(0.01
|
)
|
$
|
(0.01
|
)
|
||
|
||||||||
WEIGHTED AVERAGE NUMBER OF SHARES OUTSTANDING
|
41,868,634
|
41,494,497
|
The accompanying notes are an integral part of these financial statements.
AMERITYRE CORPORATION
|
Preferred Stock
|
Common Stock
|
Additional Paid in
|
Stock
|
Accumulated
|
|||||||||||||||||||||||
|
Shares
|
Amount
|
Shares
|
Amount
|
Capital
|
Payable
|
Deficit
|
|||||||||||||||||||||
Balance, June 30, 2014
|
2,000,000
|
$
|
2,000
|
41,441,620
|
$
|
41,441
|
$
|
62,455,820
|
$
|
-
|
$
|
(60,491,391
|
)
|
|||||||||||||||
Preferred stock dividends
|
-
|
-
|
-
|
-
|
-
|
-
|
(100,000
|
)
|
||||||||||||||||||||
2013 Series Convertible preferred stock offering costs
|
-
|
-
|
-
|
-
|
(188
|
)
|
-
|
-
|
||||||||||||||||||||
Common stock issued for services at $0.04 per share
|
-
|
-
|
128,667
|
129
|
5,018
|
-
|
-
|
|||||||||||||||||||||
Reversal of deferred financing fees
|
-
|
-
|
-
|
-
|
31,500
|
-
|
-
|
|||||||||||||||||||||
Stock option based compensation expense for employee service
|
-
|
-
|
-
|
-
|
23,706
|
-
|
-
|
|||||||||||||||||||||
Net loss for the year ended June 30, 2015
|
-
|
-
|
-
|
-
|
-
|
-
|
(299,361
|
)
|
||||||||||||||||||||
Balance, June 30, 2015
|
2,000,000
|
2,000
|
41,570,287
|
41,570
|
62,515,856
|
-
|
(60,890,752
|
)
|
||||||||||||||||||||
Preferred stock dividends
|
-
|
-
|
-
|
-
|
-
|
(100,000
|
)
|
|||||||||||||||||||||
Stock option based compensation expense – options
|
-
|
-
|
-
|
-
|
47,730
|
-
|
||||||||||||||||||||||
Stock option based compensation expense for employee service
|
-
|
-
|
605,000
|
605
|
15,970
|
4,500
|
-
|
|||||||||||||||||||||
Net loss for the year ended June 30, 2016
|
-
|
-
|
-
|
-
|
-
|
-
|
(243,052
|
)
|
||||||||||||||||||||
Balance, June 30, 2016
|
2,000,000
|
$
|
2,000
|
42,175,287
|
$
|
42,175
|
$
|
62,579,558
|
$
|
4,500
|
$
|
(61,233,804
|
)
|
The accompanying notes are an integral part of these financial statements.
AMERITYRE CORPORATION
|
For the Years Ended June 30,
|
|||||||
|
2016
|
2015
|
||||||
CASH FLOWS FROM OPERATING ACTIVITIES
|
||||||||
Net Loss
|
$
|
(243,052
|
)
|
$
|
(299,361
|
)
|
||
Adjustments to reconcile net loss to net cash used by operating activities:
|
||||||||
Depreciation and amortization expense
|
141,524
|
221,109
|
||||||
Change in allowance for bad debt recovery
|
(289
|
)
|
(7,777
|
)
|
||||
Stock based compensation
|
68,805
|
23,706
|
||||||
Stock paid for services
|
-
|
5,147
|
||||||
Gain on extinguishment of long term payable
|
-
|
(62,500
|
)
|
|||||
Loss on disposal of assets
|
-
|
62,731
|
||||||
Changes in operating assets and liabilities:
|
||||||||
Accounts receivable
|
27,297
|
88,660
|
||||||
Prepaid and other current assets
|
(20,456
|
)
|
11,771
|
|||||
Inventory and change in inventory reserve
|
41,929
|
(76,696
|
)
|
|||||
Accounts payable and accrued expenses
|
(89,981
|
)
|
(85,000
|
)
|
||||
Net Cash Used by Operating Activities
|
(74,223
|
)
|
(118,210
|
)
|
||||
CASH FLOWS FROM INVESTING ACTIVITIES
|
||||||||
Purchase of property and equipment
|
(7,642
|
)
|
(55,840
|
)
|
||||
Cash paid for patents and trademarks
|
-
|
(4,000
|
)
|
|||||
Proceeds from the sale of assets
|
-
|
7,775
|
||||||
Net Cash Used by Investing Activities
|
(7,642
|
)
|
(52,065
|
)
|
||||
CASH FLOWS FROM FINANCING ACTIVITIES
|
||||||||
Payment on lease liability
|
(4,694
|
)
|
-
|
|||||
Payments on notes payable
|
(1,856
|
)
|
(2,405
|
)
|
||||
Proceeds from sale of preferred stock, net of offering costs
|
-
|
(188
|
)
|
|||||
Preferred stock dividends
|
(100,000
|
)
|
(100,000
|
)
|
||||
Net Cash Used by Financing Activities
|
(106,550
|
)
|
(102,593
|
)
|
||||
NET DECREASE IN CASH
|
(188,415
|
)
|
(272,868
|
)
|
||||
CASH AT BEGINNING OF YEAR
|
455,717
|
728,585
|
||||||
CASH AT END OF YEAR
|
$
|
267,302
|
$
|
455,717
|
NON-CASH FINANCING ACTIVITIES
|
||||||||
|
||||||||
Interest paid
|
$
|
3,206
|
$
|
4,363
|
||||
Income taxes paid
|
$
|
-
|
$
|
-
|
SUPPLEMENTAL SCHEDULE OF CASH FLOW ACTIVITIES
|
||||||||
|
||||||||
Write off of accounts receivable previously allowed for
|
$
|
-
|
$
|
7,296
|
||||
Removal of fully depreciated fixed assets
|
$
|
-
|
$
|
368,953
|
||||
Expired or retired patents
|
$
|
-
|
$
|
58,276
|
||||
Reversal of deferred financing fees
|
$
|
-
|
$
|
31,500
|
||||
Capitalized lease
|
$
|
19,337
|
$
|
-
|
||||
Reclassification of accounts receivable – related party to accounts receivable
|
$
|
6,312
|
$
|
-
|
The accompanying notes are an integral part of these financial statements.
AMERITYRE CORPORATION
June 30, 2016 and 2015
NOTE 1 – ORGANIZATION AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
Organization
Amerityre Corporation (the “Company”) incorporated as a Nevada corporation on January 30, 1995 under the name American Tire Corporation and changed its name to Amerityre Corporation in December 1999. The Company was organized to take advantage of existing proprietary and non-proprietary technology available for the manufacturing of specialty tires. The Company engages in the manufacturing, marketing, distribution and sales of “flat free” specialty tires and tire-wheel assemblies and currently is manufacturing these tires at its manufacturing facility located in Boulder City, Nevada.
The Company’s financial statements are prepared using the accrual method of accounting. The Company has elected a June 30 year-end.
Reclassifications
Certain reclassifications, which have no effect on net loss, have been made in the prior period financial statements to conform to the current presentation, specifically the separation of “store” inventory as part of other current assets at June 30, 2015.
Estimates
The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Management routinely makes judgments on historical experience and various other factors that are believed to be reasonable under the circumstances. Actual results could differ from those estimates.
Concentrations of Risk
The Company maintains several accounts with financial institutions. Currently, the accounts are insured by the Federal Deposit Insurance Corporation up to $250,000.
Credit losses, if any, have been provided for in the financial statements and are based on management’s expectations. The Company’s accounts receivable are subject to potential concentrations of credit risk. The Company does not believe that it is subject to any unusual risks or significant risks in the normal course of its business.
We have three customers who accounted for 21% of our sales for the year ended June 30, 2016 and two customers who accounted for 27% of our sales for the year ended June 30, 2015.
Cash and Cash Equivalents
We consider all highly liquid investments with a maturity of three months or less when purchased to be cash equivalents. As of June 30, 2016 and 2015, respectively, we had no cash equivalents.
Trade Receivables
We generally charge-off trade receivables that are more than 120 days outstanding as bad-debt expense, unless management believes the amount to be collectable. The charge-off amounts are included in general and administrative expenses. As of June 30, 2016 and 2015, the reserve for uncollectible accounts was $0 and $289, respectively.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2016 and 2015
Inventory
Inventory is stated at the lower of cost (computed on a first-in, first-out basis) or market. The inventory consists primarily of chemicals, finished goods produced in our plant and products purchased for resale.
|
2016
|
2015
|
||||||
Raw materials
|
$
|
257,260
|
$
|
292,094
|
||||
Finished goods
|
663,666
|
655,714
|
||||||
Inventory reserve
|
(125,981
|
)
|
(110,935
|
)
|
||||
Inventory – net (current and long term)
|
$
|
794,945
|
$
|
836,873
|
Our inventory reserve reflects items that were deemed to be defective or obsolete based on an analysis of all inventories on hand.
In fiscal years 2016 and 2015, the Company critically reviewed all slow moving inventory to determine if defective or obsolete. If not defective or obsolete we presented these items as non-current inventory, although all inventory is ready and available for sale at any moment.
For those items that are spare maintenance materials or parts kept on hand as backup components of major production lines, or “store inventories”, the Company capitalizes the amount if above our capitalization policy for property and equipment. In the past we have included these items as part of our raw materials inventory. As of June 30, 2015 these items, amounting to $10,815, have been reclassified into other current assets. The balance at June 30, 2014, also $10,815, was also reclassified out of inventory and into other current assets.
Property and Equipment
Property and equipment are stated at cost, generally with a cost of $2,500 or greater. Expenditures for small tools, ordinary maintenance and repairs are charged to operations as incurred. Major additions and improvements are capitalized. When we retire or dispose of assets, the costs and accumulated depreciation or amortization are removed from the respective accounts and we recognize any related gain or loss. Major replacements that substantially extend the useful life of an asset are capitalized and depreciated. Assets which qualify for capital lease treatment and follow our property and equipment capitalization policy are also capitalized. Depreciation and amortization, collectively depreciation expense, is computed using the straight-line method over estimated useful lives as follows:
Leasehold improvements
|
5 years, or over lease term | |
Equipment
|
|
5 to 10 years
|
Furniture and fixtures
|
|
7 years
|
Software
|
|
2 years
|
Depreciation expense for the years ended June 30, 2016 and 2015 was $114,193 and $189,155, respectively.
Patents and Trademarks
Patent and trademark costs have been capitalized at June 30, 2016, totaling $479,633 with accumulated amortization of $304,254 for a net book value of $175,379. Patent and trademark costs capitalized at June 30, 2015, totaled $479,633 with accumulated amortization of $276,923 for a net book value of $202,710.
The patents which have been granted are being amortized over a period of 20 years. Patents which are pending or are being developed are not amortized. Amortization begins once the patents have been issued. As of June 30, 2016 and 2015, respectively, there were no pending patents. Annually, patents are inventoried and analyzed, which resulted in the recognition of a loss on abandonment, expiration or retirement of patents and trademarks of $-0- and $56,283 for the years ended June 30, 2016 and 2015, respectively.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2016 and 2015
Amortization expense for the years ended June 30, 2016 and 2015 was $27,331 and $31,954 respectively. The Company evaluates the recoverability of intangibles and reviews the amortization period on a continual basis utilizing the guidance of the Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 350, Intangibles – Goodwill and Other. We consider the following indicators, among others, when determining whether or not our patents are impaired:
· | any changes in the market relating to the patents that would decrease the life of the asset; |
· | any adverse change in the extent or manner in which the patents are being used; |
· | any significant adverse change in legal factors relating to the use of the patents; |
· | current period operating or cash flow loss combined with our history of operating or cash flow losses; |
· | future cash flow values based on the expectation of commercialization through licensing; and |
· | current expectations that, more likely than not, the patents will be sold or otherwise disposed of significantly before the end of its previously estimated useful life. |
The estimated amortization expense, based on current intangible balances, for the next five fiscal years beginning July 1, 2016 is as follows:
2017
|
$
|
22,747
|
||
2018
|
$
|
22,304
|
||
2019
|
$
|
20,962
|
||
2020
|
$
|
16,653
|
||
2021
|
$
|
15,885
|
Financial and Derivative Instruments
The Company periodically enters into financial instruments. Upon entry, each instrument is reviewed for debt or equity treatment. In the event that the debt or equity treatment is not readily apparent, FASB ASC 480-10-S99 is consulted for temporary treatment. Once an event takes place that removes the temporary element the Company appropriately reclassifies the instrument to debt or equity.
The Company periodically assesses its financial and equity instruments to determine if they require derivative accounting. Instruments which may potentially require derivative accounting are conversion features of debt, equity, and common stock equivalents in excess of available authorized common shares, and contracts with variable share settlements. In the event of derivative treatment, we mark the instrument to market.
Stock-Based Compensation
We account for stock-based compensation under the provisions of FASB ASC 718, Compensation – Stock Compensation. Our financial statements as of and for the fiscal years ended June 30, 2016 and 2015 reflect the impact of FASB ASC 718. Stock-based compensation expense recognized under FASB ASC 718 for the fiscal years ended June 30, 2016 and 2015 was $68,805 and $23,706, respectively, related to employee stock options and employee stock grants.
FASB ASC 718 requires companies to estimate the fair value of share-based payment awards on the date of grant using an option-pricing model. The value of the portion of the award that is ultimately expected to vest is recognized as expense over the requisite service periods in our Statement of Operations. Stock-based compensation expense recognized in our Statements of Operations for fiscal years ended June 30, 2016 and 2015 assume all awards will vest; therefore no reduction has been made for estimated forfeitures.
Basic and Fully Diluted Net Loss per Share
Basic and Fully Diluted net loss per share is computed using the weighted-average number of common shares outstanding during the period.
The Company’s outstanding stock options, warrants, and shares issuable upon conversion of outstanding convertible notes have been excluded from the diluted net loss per share calculation. The Company excluded a total of 4,300,000 and 2,770,000 common stock equivalents for the years ended June 30, 2016 and 2015, respectively because they are anti-dilutive.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2016 and 2015
Income Taxes
FASB ASC 740 requires a company to determine whether it is more likely than not that a tax position will be sustained upon examination based on the technical merits of the position. If the more-likely-than-not threshold is met, a company must measure the tax position to determine the amount to recognize in the financial statements. As a result of the implementation of FASB ASC 740, the Company performed a review of its material tax positions in accordance with recognition and measurement standards established by FASB ASC 740.
Deferred taxes are provided on a liability method whereby deferred tax assets are recognized for deductible temporary differences and operating loss and tax credit carry-forwards and deferred tax liabilities are recognized for taxable temporary differences. Temporary differences are the differences between the reported amounts of assets and liabilities and their tax bases. Deferred tax assets are reduced by a valuation allowance when, in the opinion of management, it is more likely than not that some portion or all of the deferred tax assets will not be realized. Deferred tax assets and liabilities are adjusted for the effects of changes in tax laws and rates on the date of enactment. Net deferred tax assets consist of the following components as of June 30, 2016 and 2015:
|
2016
|
2015
|
||||||
Deferred tax assets:
|
||||||||
NOL carryover
|
$
|
17,050,100
|
$
|
17,035,800
|
||||
Section 1231 loss carryover
|
24,300
|
24,900
|
||||||
Allowance for doubtful accounts
|
-
|
100
|
||||||
Inventory reserve
|
44,100
|
38,800
|
||||||
R & D carryover
|
221,600
|
221,600
|
||||||
Accrued vacation
|
(11,700
|
)
|
(7,600
|
)
|
||||
Deferred tax liabilities:
|
||||||||
Depreciation
|
15,500
|
(11,400
|
)
|
|||||
Valuation allowance
|
(17,343,900
|
)
|
(17,302,200
|
)
|
||||
Net deferred tax asset
|
$
|
-
|
$
|
-
|
The income tax provision differs from the amount of income tax determined by applying the U.S. federal income tax rate to pretax income from continuing operations for the years ended June 30, 2016 and 2015 due to the following:
|
2016
|
2015
|
||||||
Book loss
|
$
|
(85,100
|
)
|
$
|
(104,800
|
)
|
||
Depreciation
|
9,100
|
39,400
|
||||||
Meals & entertainment
|
700
|
2,800
|
||||||
Nondeductible expenses
|
24,100
|
17,100
|
||||||
Accrued vacation
|
11,300
|
(2,200
|
)
|
|||||
Inventory reserve
|
5,300
|
(900
|
)
|
|||||
Receivable reserve
|
(100
|
)
|
(5,300
|
)
|
||||
Related party accruals
|
-
|
(21,900
|
)
|
|||||
Loss on asset disposal
|
-
|
10,400
|
||||||
|
||||||||
Valuation allowance
|
34,700
|
65,400
|
||||||
|
$
|
-
|
$
|
-
|
At June 30, 2016, the Company had net operating loss carry-forwards of approximately $43,718,000 that may be offset against future taxable income from the year 2017 through 2036. No tax benefit has been reported in the June 30, 2016 financial statements since the potential tax benefit is offset by a valuation allowance of the same amount.
Due to the change in ownership provisions of the Tax Reform Act of 1986, net operating loss carry-forwards for Federal income tax reporting purposes are subject to annual limitations. Should a change in ownership occur, net operating loss carry-forwards may be limited as to use in future years.
The Company’s policy is to recognize interest accrued related to unrecognized tax benefits in interest expense and penalties in operating expenses. As of June 30, 2016 the Company had no accrued interest or penalties related to uncertain tax positions.
The Company files income tax returns in the U.S. federal jurisdiction. With few exceptions, the Company is no longer subject to U.S. federal, state and local, or non-U.S. income tax examinations by tax authorities for years before 2011.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2016 and 2015
Fair Value Accounting
As required by the Fair Value Measurements and Disclosures Topic of the FASB ASC, fair value is measured based on a three-tier fair value hierarchy, which prioritizes the inputs used in measuring fair value as follows: (Level 1) observable inputs such as quoted prices in active markets; (Level 2) inputs, other than the quoted prices in active markets, that are observable either directly or indirectly; and (Level 3) unobservable inputs in which there is little or no market data, which require the reporting entity to develop its own assumptions.
The three levels of the fair value hierarchy are described below:
|
Level 1
|
Unadjusted quoted prices in active markets that are accessible at the measurement date for identical, unrestricted assets or liabilities;
|
|
Level 2
|
Quoted prices in markets that are not active, or inputs that are observable, either directly or indirectly, for substantially the full term of the asset or liability;
|
|
Level 3
|
Prices or valuation techniques that require inputs that are both significant to the fair value measurement and unobservable (supported by little or no market activity).
|
Revenue Recognition
Revenue for products is recognized when the sales amount is determined, shipment of goods to the customer has occurred and collection is reasonably assured. Generally, we ship all of our products FOB origination. License fee revenue is recognized as earned, and no revenue is recognized until the inception of the license term.
Shipping and Handling
Shipping and Handling Fees require that freight costs charged to customers be classified as revenues. Freight expenses are included in costs of sales.
Product Warranties
The Company’s standard sales terms include a limited warranty on workmanship and materials to the original purchaser if items sold are used in the service for which they are intended. Specifically the Company warrants wheels, bearings, and bushings for one year from the date of purchase. In the past the Company estimated its warranty reserve based on historical experience with warranty claims and returns for defective items. Because the Company has experienced limited items through the warranty process, in fiscal year 2016 the Company changed to actual, instead of estimated, warranty recognition. This change in accounting principle did not have a material impact on the Company’s financial statements and as of June 30, 2016 and 2015, the Company had no estimated warranty reserves accrued.
Advertising
The Company follows the policy of charging the costs of advertising to expense as incurred. Advertising expense for the years ended June 30, 2016 and 2015 was $5,329 and $28,606, respectively.
Sales Tax
In accordance with FASB ASC 605-45, formerly EITF Issue No. 06-3, How Taxes Collected from Customers and Remitted to Government Authorities Should Be Presented in the Income Statement, the Company accounts for sales taxes and value added taxes imposed on its good and services on a net basis in the Statement of Operations.
Related Party Transactions
Amerityre’s immediate past Chairman of the Board, Timothy L. Ryan, is also the principal owner of Rhino Rubber LLC, a manufacturing and distribution company for solid industrial tires and wheels. As of December 2015, with Mr. Ryan’s exit from our Board of Directors, he was no longer a director of the Company and all receivables outstanding to Rhino Rubber LLC have been reflected as trade accounts receivable.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2016 and 2015
We currently distribute directly from our manufacturing facility in Boulder City, Nevada only. In the past we also distributed from an independent, contracted warehouse in Ravenna, Ohio. This contract distribution point was unable to support customer requirements, became ineffective and stopped operations in the second quarter of 2014. In order to keep commitments to customers and keep revenue growth positive, distribution and other related services were transferred to Rhino Rubber in Akron, Ohio. The Company paid $600 for monthly warehousing fees inclusive of freight, shipping and labor for mounting services through October 31, 2015. Effective October 31, 2015 we closed the Akron, Ohio distribution point and customers are serviced from our Boulder City location.
Recent Accounting Pronouncements
Issued
In January 2015, the FASB issued ASU 2015-01, “Income Statement – Extraordinary and Unusual Items (Subtopic 225-20),” which eliminates the concept of extraordinary items. The new guidance is effective for fiscal years and interim periods within those years beginning after December 15, 2015. The new guidance is to be applied prospectively but may also be applied retrospectively to all prior periods presented in the financial statements. Early adoption is permitted provided that the guidance is applied from the beginning of the fiscal year of adoption. We expect to adopt the provisions of this new guidance on July 1, 2016. We do not expect the adoption of the new provisions to have a material impact on our financial condition or results of operations.
In November 2015, the FASB issued ASU No. 2015-17, “Balance Sheet Classification of Deferred Taxes,” requiring all deferred tax assets and liabilities, and any related valuation allowance, to be classified as noncurrent on the balance sheet. The classification change for all deferred taxes as noncurrent simplifies entities’ processes as it eliminates the need to separately identify the net current and net noncurrent deferred tax asset or liability in each jurisdiction and allocate valuation allowances. We do not expect the adoption of the new provisions to have a material impact on our financial condition or results of operations.
In July 2015, the FASB issued ASU No. 2015-11, “Simplifying the Measurement of Inventory”. Under ASU 2015-11, inventory will be measured at the “lower of cost and net realizable value” and options that currently exist for “market value” will be eliminated. The standard defines net realizable value as the “estimated selling prices in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation.” No other changes were made to the current guidance on inventory measurement. ASU 2015-11 is effective for interim and annual periods beginning after December 15, 2016. Early application is permitted and should be applied prospectively. The Company is currently evaluating the impact the adoption of ASU 2015-11 will have on its financial statements.
In February 2016, the FASB issued ASU No. 2016-02, "Leases", ("ASU 2016-02") which amends the existing accounting standards for lease accounting, including requiring lessees to recognize most leases on their balance sheets and making targeted changes to lessor accounting. ASU 2016-02 will become effective for public companies during interim and annual reporting periods beginning after December 15, 2018 with early adoption permitted. The Company is currently evaluating the impact of the adoption of ASU 2016-02 on the Company's financial statements.
In March 2016, the FASB issued ASU No. 2016-09, "Compensation - Stock Compensation (Topic 718): Improvements to Employee Share-Based Payment Accounting." ASU 2016-09 amends several aspects of the accounting for share-based payment transactions including the income tax consequences, classification of awards as either equity or liabilities and classification on the statement of cash flows. ASU 2016-09 is effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years. Early adoption is permitted. If early adopted, an entity must adopt all of the amendments in the same period. The Company is currently evaluating the impact of the adoption of ASU 2016-09 on the Company's financial statements.
In May 2014, the FASB issued ASU No. 2014-09, “Revenue from Contracts with Customers (Topic 606).” ASU 2014-09 completes the joint effort by the FASB and International Accounting Standards Board (IASB) to improve financial reporting by creating common revenue recognition guidance for GAAP and International Financial Reporting Standards (IFRS). In April 2016, the FASB issued ASU 2016-10, “Revenue from Contracts with Customers (Topic 606): Identifying Performance Obligations and Licensing.” ASU 2016-10 clarifies the implementation guidance on identifying performance obligations. These ASUs apply to all companies that enter into contracts with customers to transfer goods or services. These ASUs are effective for public entities for interim and annual reporting periods beginning after December 15, 2017. Early adoption is permitted, but not before interim and annual reporting periods beginning after December 15, 2016. Entities have the choice to apply these ASUs either retrospectively to each reporting period presented or by recognizing the cumulative effect of applying these standards at the date of initial application and not adjusting comparative information.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2016 and 2015
In May 2016, the FASB issued ASU No. 2016-12, "Revenue from Contracts with Customers (Topic 606): Narrow-Scope Improvements and Practical Expedients" ASU 2016-12 amendments in this Update affect the guidance in Accounting Standards Update 2014-09, Revenue from Contracts with Customers (Topic 606), which is not yet effective. The effective date and transition requirements for the amendments in this Update are the same as the effective date and transition requirements for Topic 606 (and any other Topic amended by Update 2014-09). Accounting Standards Update 2015-14, Revenue from Contracts with Customers (Topic 606): Deferral of the Effective Date, defers the effective date of Update 2014-09 by one year. The Company is currently evaluating the impact of the adoption of ASU 2016-10 and all its collective amendments on the Company's financial statements.
Other recent accounting pronouncements issued by the FASB (including its Emerging Issues Task Force), the American Institute of Certified Public Accountants, and the SEC, did not, or are not believed by management to, have a material impact on the Company's present or future financial position, results of operations or cash flows.
NOTE 2 – DEBT
A former board member, Silas O. Kines, who passed away on January 11, 2012, was also the principal owner of Forklift Tire of Florida and K-2 Industrial Tire, Inc. In accordance with the Commission Agreement with Forklift Tire of Florida, dated February 2, 2011, between Amerityre Corporation and K-2 Industrial Tire, Inc., K-2 is due a five percent (5%) commission on all forklift tire sales. In exchange for the forklift models transferred to Amerityre under that agreement, the first $96,000 in commission payments will be used to extinguish the long term liability recorded on the transaction. As of June 30, 2016, $11,752 and $53,840 (2015, $13,608 and $53,840) were recorded for the current and long-term portion, respectively, of the related liability.
In June 2016, the Company executed a term note with U.S. Bank to finance critical manufacturing equipment and operating enhancements which will be placed in service in early fiscal year 2017. Total amount financed was $58,068, at 5.59% interest, with payments of $1,059 due for 60 months starting July 2016.
|
Payments due by period
|
|||||||||||||||||||
|
Total
|
Less than
1 year
|
1 to 3 years
|
3 to 5 years
|
After
5 years
|
|||||||||||||||
|
||||||||||||||||||||
Bank debt
|
$
|
55,325
|
$
|
11,650
|
$
|
38,126
|
$
|
5,549
|
$
|
-
|
||||||||||
|
||||||||||||||||||||
Total cash obligations
|
$
|
55,325
|
$
|
11,650
|
$
|
38,126
|
$
|
5,549
|
$
|
-
|
NOTE 3 - CAPITAL LEASE
In July 2015 the Company entered into a capital lease for research and development equipment for $19,337 (which has accumulated depreciation of $3,706).
The following is a schedule by years of future minimum lease payments under capital leases together with present value of the net minimum lease payments as of June 30, 2016:
2017
|
$
|
8,697
|
||
2018
|
8,697
|
|||
2019
|
739
|
|||
2020
|
-
|
|||
2021
|
-
|
|||
Total minimum lease payments
|
18,133
|
|||
Less: executory costs
|
-
|
|||
Net minimum lease payments
|
18,133
|
|||
Less: amount representing interest
|
3,490
|
|||
Present value of net minimum payments
|
$
|
14,643
|
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2016 and 2015
NOTE 4 – COMMITMENTS AND CONTINGENCIES
In May 2015, we negotiated a five (5) year extension of the lease on our executive office and manufacturing facility located at 1501 Industrial Road, Boulder City, Nevada. The property consists of a 49,200 square foot building. We currently occupy all 49,200, inclusive of approximately 5,500 square feet of office space, situated on approximately 4.15 acres. All other terms and conditions of the building lease remain in effect.
|
Payments due by period
|
|||||||||||||||||||
|
Total
|
Less than
1 year
|
1 to 3 years
|
3 to 5 years
|
After
5 years
|
|||||||||||||||
|
||||||||||||||||||||
Facility lease
|
$
|
550,880
|
$
|
136,800
|
$
|
414,000
|
$
|
-
|
$
|
-
|
||||||||||
|
||||||||||||||||||||
Total contractual cash obligations
|
$
|
550,880
|
$
|
136,800
|
$
|
414,000
|
$
|
-
|
$
|
-
|
Rent expense for the years ended June 30, 2016 and 2015 was $135,600 and $132,000, respectively.
NOTE 5 – STOCK TRANSACTIONS
During the years ended June 30, 2016 and 2015, the Company had the following stock transactions:
On December 13, 2013, the Board of Directors approved a resolution designating 2,000,000 shares of preferred stock, $0.001 par value, as 2013 Series Convertible Preferred Stock (the “2013 Series Shares”). On December 18, 2013, the Company filed a Certificate of Designation with the Nevada Secretary of State for the 2013 Series Convertible Preferred Stock, which was approved by the Nevada Secretary of State on December 19, 2013. The 2013 Series Shares have voting rights only on any matters directly affecting the rights and privileges of the 2013 Series Shares. The 2013 Series Shares have a liquidation preference amounting to a return of the initial par value per share only, with no further participation in any distributions to other shareholders. Any issued 2013 Series Shares will convert to the Company’s common stock at a ratio of ten shares of common stock for each share of the 2013 Series Shares (1) at any time at the election of the holder; or (2) automatically on the date that is six years after the date of original issuance of the shares. Lastly, the 2013 Series Shares contain a quarterly cash dividend rate of 1.25% of the original issuance price of $1.00 per share or $100,000 per year as of June 30, 2016 and 2015, respectively.
During the second quarter of fiscal year 2015, we granted a consultant 128,667 common shares valued at $0.04 per share ($5,147) for work performed related to sales of our products in the three month period ending December 31, 2014. These shares were issued in January 2015.
In a period prior to 2015 we had accrued deferred financing costs related to a private placement stock campaign. Upon further investigation the accrual was in error and reversed in the second quarter of fiscal 2015, resulting in an increase to additional paid in capital of $31,500.
To all non-officer employees of the Company on record as of July 22, 2015, a one-time stock bonus award of 5,000 shares of the Company’s restricted common stock was granted, per employee, valued at $0.015 a share (fair value on the date of grant with a 50% discount pursuant to U.S. Internal Revenue Service, revenue Ruling 77-287). As of July 22, 2015 there were 16 non-officer employees resulting in 80,000 shares, which were issued in July 2015.
To the officers of Amerityre, 600,000 shares were granted on July 20, 2015 (valued at $0.03) with 75% of the grant allocated to the CEO and 25% of the grant allocated to the CFO. The shares of stock vest ratably each quarter end during fiscal year 2016 and are payable immediately after the vesting date. For the year ended June 30, 2016 the Company recognized $18,000 of compensation expense for these grants; $4,500 of which is a stock payable. The final 150,000 shares under this stock award were issued in July 2016.
In February 2016,the Board approved 75,000 shares of stock be issued to a senior management employee in connection with his employment agreement, valued at $0.025 a share (fair value on the date of grant with a 50% discount pursuant to U.S. Internal Revenue Service, revenue Ruling 77-287). These shares were issued in March 2016.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2016 and 2015
NOTE 6 – STOCK OPTIONS AND WARRANTS
General Option Information
On July 6, 2011, the Board of Directors cancelled the “2004 Non-Employee Directors’ Stock Incentive Plan” and approved the "Directors’ 2011 Stock Option and Award Plan”. Under the 2011 Plan, a total of 3,300,000 shares are authorized for issuance.
The Company also maintained the 2005 Stock Option and Award Plan, which was previously approved by shareholders, for the purpose of granting option awards to its employees and consultants. This plan had a 10 year life and expired July 2015.
On August 10, 2015, the Board of Directors cancelled the “Directors’ 2011 Stock Option and Award Plan” as all options under this plan had been granted and adopted the “2015 Omnibus Stock Option and Award Plan” which contains provisions for up to 3,000,000 stock options to be granted to employees, consultants and directors. The 2015 Omnibus Stock Option and Award Plan did not obtain the necessary shareholder approval in the Company’s annual proxy process, resulting in certain U.S. Internal Revenue Service provisions to be ineffective.
Prior Issuances of options
During the year ended June 30, 2015, 100,000 options were granted to a consultant pursuant to a consulting agreement. Additionally 140,000 options related to this transaction vested (20,000 options monthly May – November 2014 at $0.10).
On December 1, 2014, 480,000 options were granted to the Company’s Chief Executive Officer (then our Chief Operating Officer) as part of his employment offer. The options have a strike price of $0.10, vest December 1, 2015 and expire December 1, 2020.
On January 21, 2015, 50,000 options were granted to the Company’s Chief Financial Officer as part of her employment offer. The options have a strike price of $0.10, vest ratably January 21, 2015 to December 1, 2015 and expire December 1, 2020.
Year to date expense related to these options is $23,706 as of June 30, 2015.
Option issuances and vesting during the period ending June 30, 2016
On December 1, 2014, 480,000 options were granted to the Company’s Chief Executive Officer (then our Chief Operating Officer) as part of his employment offer. The options have a strike price of $0.10, vest December 1, 2015 and expire December 1, 2020.
On January 21, 2015, 50,000 options were granted to the Company’s Chief Financial Officer as part of her employment offer. The options have a strike price of $0.10, vest ratably January 21, 2015 to December 1, 2015 and expire December 1, 2018.
In the October 2015 Board meeting, the Board granted all non-executive Board members 100,000 options, with the audit committee chair receiving an additional 50,000 options, for Board services rendered for the fiscal year ended June 30, 2015. The options have a strike price of $0.10, vest at the end of the Board term on December 3, 2015 and expire December 3, 2017.
On December 1, 2015, 480,000 options were granted to the Company’s Chief Executive Officer (then our Chief Operating Officer) as part of his employment offer. The options have a strike price of $0.10, vest December 1, 2016 and expire December 1, 2020.
On January 19, 2016, the Board granted all non-executive Board members 100,000 options, with the audit committee chair receiving an additional 50,000 options, for Board services rendered for the Board term ending December 2016. The options have a strike price of $0.10, vest at the end of the Board term in December 2016 and expire December 2019.
On January 19, 2016, 50,000 options were granted to the Company’s Chief Financial Officer as part of renewal of her employment agreement. The options have a strike price of $0.10, vest ratably January 21, 2016 to December 1, 2016 and expire December 1, 2019. In addition to the option renewal $550 a month in health insurance reimbursement was included in the renewal. All other terms remain the same.
Year to date expense related to these options is $47,730 as of June 30, 2016.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2016 and 2015
As of June 30, 2016, there was $15,077 of unrecognized stock-based compensation expense related to stock options that will be recognized over the vest period (December 2016) of the underlying option.
We estimated the fair value of the stock options above at the grant date based on the following weighted average assumptions:
Risk-free interest rate
|
|
|
1.077
|
%
|
Expected life
|
|
|
2.0 – 4.5
|
years
|
Expected volatility
|
|
|
167.37 – 113.50
|
%
|
Dividend yield
|
|
|
0.00
|
%
|
A summary of the status of our outstanding stock options as of June 30, 2016 and June 30, 2015 and changes during the periods then ended is presented below:
|
June 30, 2016
|
June 30, 2015
|
||||||||||||||||||||||
|
Weight Average
|
Intrinsic
|
Weight Average
|
Intrinsic
|
||||||||||||||||||||
|
Shares
|
Exercise Price
|
Value
|
Shares
|
Exercise Price
|
Value
|
||||||||||||||||||
Outstanding beginning of period
|
2,270,000
|
$
|
0.14
|
1,754,000
|
$
|
0.17
|
||||||||||||||||||
Granted
|
1,530,000
|
$
|
0.10
|
670,000
|
$
|
0.10
|
||||||||||||||||||
Expired/Cancelled
|
-
|
$
|
0.00
|
(154,000
|
)
|
$
|
(0.29
|
)
|
||||||||||||||||
Exercised
|
-
|
$
|
0.00
|
-
|
$
|
0.00
|
||||||||||||||||||
Outstanding end of period
|
3,800,000
|
$
|
0.13
|
$
|
-
|
2,270,000
|
$
|
0.14
|
$
|
-
|
||||||||||||||
Exercisable
|
3,070,000
|
$
|
0.13
|
$
|
-
|
1,752,500
|
$
|
0.16
|
$
|
-
|
The following table summarizes the range of outstanding and exercisable options as of June 30, 2016:
Outstanding
|
Exercisable
|
|||||||||||||||||||||
Range of
Exercise Prices
|
Number Outstanding
at
June 30, 2016
|
Weighted
Average
Remaining
Contractual Life
|
Weighted
Average
Exercise Price
|
Number
Exercisable at
June 30, 2016
|
Weighted
Average Remaining
Contractual Life
|
|||||||||||||||||
$
|
0.08
|
150,000
|
5.67
|
$
|
0.08
|
150,000
|
5.67
|
|||||||||||||||
$
|
0.10
|
2,200,000
|
3.09
|
$
|
0.10
|
1,470,000
|
3.09
|
|||||||||||||||
$
|
0.17
|
1,450,000
|
4.67
|
$
|
0.17
|
1,450,000
|
4.67
|
|||||||||||||||
3,800,000
|
3,070,000
|
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2016 and 2015
General Warrant Information
In September 2013, the Company obtained an extension on the remaining $100,000 secured convertible promissory note that was issued in the private placement that closed in a prior year. In exchange for the extension, the note holder received 500,000 common stock warrants and $6,500 in accrued interest and fees. The common stock warrants expire three years from the date of issuance, are exercisable at $0.13 per share, and vest on the next date the value of Amerityre common stock reaches $0.25 per share. As of June 30, 2016 the warrants have not vested. The related note was paid off as of June 30, 2014.
NOTE 7 – LIQUIDITY
Our principal sources of liquidity consist of cash and payments received from our customers. We do not have any significant revolving credit arrangements. Historically, our expenses have exceeded our sales, resulting in operating losses. From time to time, we have obtained additional liquidity to fund our operations through the sale of shares of our common stock and the placement of short-term debt instruments. At the end of 2016, we were able to obtain term bank debt financing to finance critical manufacturing equipment and operating enhancements which will be placed in service in early fiscal year 2017. Management continues to evaluate financing options but are choosing to delay financing at terms that will subject the Company to high costs of debt and are reluctant to raise money through stock sales at what we believe are highly dilutive share prices. Additionally, management has notified our preferred shareholder that we will be suspending future payments of their preferred cash dividend payments, so the Company can increase its working capital levels.
We have been working during the past year to improve our liquidity and access to capital resources. In order to execute the strategic business plan discussed during our shareholder meeting in December 2015, we require more capital resources. We will continue to pursue potential opportunities to secure short-term loans, long-term bank financing, revolving lines of credit with banking institutions and equity based transactions with interested financial firms and strategic industry partners in our effort to improve the Company’s financial position and enhance shareholder value. We are also continuing to search for potential strategic business partnerships that potentially could involve a direct investment in the Company, which would improve the Company’s liquidity position.
Over the past year, we have been working on various proposals to secure short-term loans as well as long-term bank financing and equity based investments. The Company currently does not have an existing revolving credit facility but we were able to obtain term bank debt financing at the end of 2016 to finance critical manufacturing equipment and operating enhancements which will be placed in service in early fiscal year 2017. Over the past year, we have worked with our vendors to obtain extended credit terms and increase credit lines where needed. Additionally, we continue to focus on adherence to established collection policies and proactive communication with repeat customers, including adjusting credit limits to allow for increased sales volume where warranted.
We are intent on focusing on the sale and distribution of profitable product lines. Management continues to look for further financing facilities at affordable terms that will allow the Company to maintain sufficient raw material and finished goods inventory to capitalize on sales growth opportunities. We are limiting our capital expenditures to that required to maintain current manufacturing capability or support business initiatives identified in our strategic sales plan. We continue to work to reduce our overall costs wherever possible.
To help address our cash resources which at times may be limited, we are in discussions with various third parties about potential opportunities to license our technology which we believe will bring in additional cash flows. We are in discussions with banks and other lenders regarding establishing a line of credit for short term cash needs, however at this time we have not succeeded in establishing such a line of credit. Lastly, we have entered into a short term receivable factoring agreement with a third party to sell our receivable invoices. This agreement enables us to sell individual customer invoices for faster cash flow to the Company as we deem needed.
Management continues to execute its strategic plan focusing on “Profitability as a Mindset”. The Company’s emphasis on proper product pricing and new marketing campaigns has driven more profitable sales. Improvement in results has continued and the Company has been successful in reducing its required breakeven sales level. The company has achieved profitability during the past two quarters. We believe our program to establish “Profitability as a Mindset” has been successful and we are committed to continuing these efforts.
AMERITYRE CORPORATION
Notes to the Financial Statements
June 30, 2016 and 2015
In assessing our liquidity, management reviews and analyzes our current cash, accounts receivable, accounts payable, capital expenditure commitments and other obligations. In connection with the preparation of our financial statements for the period ended June 30, 2016, we have analyzed our cash needs for the next twelve months. We have concluded that our available cash and accounts receivables are sufficient to meet our current minimum working capital, capital expenditure and other cash requirements for this period. However, to expand manufacturing and sales operations beyond the current level, additional capital may be required.
NOTE 8 – SUBSEQUENT EVENTS
In July 2016, 150,000 shares that had vested at July, 2016 for the CEO and CFO were issued.
In July 2016, the Company executed a term note with U.S. Bank to finance air conditioning units for the Boulder City manufacturing facility for $37,478, at 5.59% interest, with payments of $720 due for 60 months starting August 2016.
F-19