AMTECH SYSTEMS INC - Quarter Report: 2014 December (Form 10-Q)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

____________________

FORM 10-Q

(Mark One)



[X]	QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended: December 31, 2014



[ ]	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ________________ to ________________

Commission File Number: 0-11412

AMTECH SYSTEMS, INC.

(Exact name of registrant as specified in its charter)



Arizona	86-0411215
(State or other jurisdiction of	(I.R.S. Employer
incorporation or organization)	Identification No.)

131 South Clark Drive, Tempe, Arizona	85281
(Address of principal executive offices)	(Zip Code)

Registrant’s telephone number, including area code: 480-967-5146

Indicate by a check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. [X] Yes [ ] No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). [ X ] Yes [ ] No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):



Large accelerated filer [ ]	Accelerated filer [X]

Non-accelerated filer [ ] (Do not check if a smaller reporting company)	Smaller Reporting Company [ ]

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [ ] No [X]

Shares of Common Stock outstanding as of January 30, 2015: 13,055,975

AMTECH SYSTEMS, INC. AND SUBSIDIARIES

TABLE OF CONTENTS



	Page
PART I. FINANCIAL INFORMATION
Item 1. Condensed Consolidated Financial Statements
Condensed Consolidated Balance Sheets December 31, 2014 (Unaudited) and September 30, 2014	3
Condensed Consolidated Statements of Operations (Unaudited) Three Months Ended December 31, 2014 and 2013	5
Condensed Consolidated Statements of Comprehensive Income (Loss) (Unaudited) Three Months Ended December 31, 2014 and 2013	6
Condensed Consolidated Statements of Cash Flows (Unaudited) Three Months Ended December 31, 2014 and 2013	7
Notes to Condensed Consolidated Financial Statements (Unaudited)	8
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
Cautionary Statement Regarding Forward-Looking Statements	19
Overview	19
Results of Operations	19
Liquidity and Capital Resources	22
Off-Balance Sheet Arrangements	23
Contractual Obligations	23
Critical Accounting Policies	23
Impact of Recently Issued Accounting Pronouncements	23
Item 3. Quantitative and Qualitative Disclosures About Market Risk	23
Item 4. Controls and Procedures	24
PART II. OTHER INFORMATION
Item 1. Legal Proceedings	25
Item 1A. Risk Factors	25
Item 2. Unregistered Sales of Equity Securities and Use of Proceeds	25
Item 3. Defaults Upon Senior Securities	25
Item 4. Mine Safety Disclosures	25
Item 5. Other Information	25
Item 6. Exhibits	25
SIGNATURES	27

Table of Contents

PART I. FINANCIAL INFORMATION


Item 1.	Condensed Consolidated Financial Statements

AMTECH SYSTEMS, INC. AND SUBSIDIARIES

Condensed Consolidated Balance Sheets

(in thousands except share data)



	December 31, 2014		September 30, 2014
	(Unaudited)
Assets
Current Assets
Cash and cash equivalents	$	28,554	$	27,367
Restricted cash	2,622		2,380
Accounts receivable
Trade (less allowance for doubtful accounts of $2,750 and $2,846 at December 31, 2014, and September 30, 2014, respectively)	5,421		8,896
Unbilled and other	8,500		6,880
Inventories	18,917		16,760
Deferred income taxes	1,040		1,060
Other	2,574		2,082
Total current assets	67,628		65,425
Property, Plant and Equipment - Net	10,260		9,752
Deferred Income Taxes - Long Term	1,300		1,300
Intangible Assets - Net	7,356		2,678
Goodwill	8,223		8,323
Other Assets - Long Term	2,756		2,426
Total Assets	$	97,523	$	89,904

The accompanying notes are an integral part of these condensed consolidated financial statements.

Table of Contents

AMTECH SYSTEMS, INC. AND SUBSIDIARIES

Condensed Consolidated Balance Sheets

(in thousands except share data)



	December 31, 2014			September 30, 2014
	(Unaudited)
Liabilities and Stockholders' Equity
Current Liabilities
Accounts payable	$	8,041		$	6,003
Current maturities of long-term debt	328			—
Accrued compensation and related taxes	4,945			4,269
Accrued warranty expense	707			628
Deferred profit	5,427			6,908
Customer deposits	8,584			4,992
Other accrued liabilities	9,691			5,346
Income taxes payable	5,160			4,990
Total current liabilities	42,883			33,136
Long-term Debt	1,706			—
Income Taxes Payable Long-Term	3,180			3,180
Total liabilities	47,769			36,316

Commitments and Contingencies

Stockholders' Equity
Preferred stock; 100,000,000 shares authorized; none issued	—			—
Common stock; $0.01 par value; 100,000,000 shares authorized; shares issued and outstanding: 9,869,916 and 9,848,253 at December 31, 2014, and September 30, 2014, respectively	99			98
Additional paid-in capital	82,117			81,884
Accumulated other comprehensive loss	(6,842		)	(5,790		)
Retained deficit	(26,246		)	(21,051		)
Total stockholders' equity	49,128			55,141
Noncontrolling interest	626			(1,553		)
Total equity	49,754			53,588
Total Liabilities and Stockholders' Equity	$	97,523		$	89,904

The accompanying notes are an integral part of these condensed consolidated financial statements.

Table of Contents

AMTECH SYSTEMS, INC. AND SUBSIDIARIES

Condensed Consolidated Statements of Operations

(Unaudited)

(in thousands, except per share data)



	Three Months Ended December 31,
	2014			2013
Revenues, net of returns and allowances	$	12,396		$	14,772
Cost of sales	8,968			10,237
Gross profit	3,428			4,535

Selling, general and administrative	6,384			4,124
Research and development	1,837			889
Operating loss	(4,793		)	(478		)

Interest and other income, net	97			106
Loss before income taxes	(4,696		)	(372		)

Income tax provision	180			560

Net loss	(4,876		)	(932		)

Add: net loss (income) attributable to noncontrolling interest	(319		)	138
Net loss attributable to Amtech Systems, Inc.	$	(5,195	)	$	(794	)

Loss Per Share:

Basic loss per share attributable to Amtech shareholders	$	(0.53	)	$	(0.08	)
Weighted average shares outstanding	9,854			9,560
Diluted loss per share attributable to Amtech shareholders	$	(0.53	)	$	(0.08	)
Weighted average shares outstanding	9,854			9,560

The accompanying notes are an integral part of these condensed consolidated financial statements.

Table of Contents

AMTECH SYSTEMS, INC. AND SUBSIDIARIES

Condensed Consolidated Statements of Comprehensive Income (Loss)

(Unaudited)

(in thousands)



	Three Months Ended December 31,
	2014			2013
Net loss	$	(4,876	)	$	(932	)
Foreign currency translation adjustment	(1,058		)	705
Comprehensive loss	(5,934		)	(227		)

Comprehensive (income) loss attributable to noncontrolling interest	(313		)	161
Comprehensive loss attributable to Amtech Systems, Inc.	$	(6,247	)	$	(66	)

The accompanying notes are an integral part of these condensed consolidated financial statements.

Table of Contents

AMTECH SYSTEMS, INC. AND SUBSIDIARIES

Condensed Consolidated Statements of Cash Flows

(Unaudited)

(in thousands)



	Three Months Ended December 31,
	2014			2013
Operating Activities
Net loss	$	(4,876	)	$	(932	)
Adjustments to reconcile net loss to net cash provided by (used in) operating activities:
Depreciation and amortization	705			623
Write-down of inventory	35			90
Deferred income taxes	(4		)	—
Non-cash share based compensation expense	232			176
Provision for allowance for doubtful accounts	44			33
Changes in operating assets and liabilities:
Restricted cash	(244		)	944
Accounts receivable	2,371			(9,748		)
Inventories	(535		)	5,498
Income taxes refundable and payable, net	172			532
Prepaid expenses and other assets	(722		)	1,078
Accounts payable	(429		)	(237		)
Accrued liabilities and customer deposits	6,407			(8,534		)
Deferred profit	(1,259		)	3,554
Net cash provided by (used in) operating activities	1,897			(6,923		)
Investing Activities
Purchases of property, plant and equipment	(155		)	(154		)
Investment in acquisition, net of cash	(253		)	—
Net cash used in investing activities	(408		)	(154		)
Financing Activities
Proceeds from the exercise of stock options	—			9
Net cash provided by financing activities	—			9
Effect of Exchange Rate Changes on Cash	(302		)	208
Net Increase (Decrease) in Cash and Cash Equivalents	1,187			(6,860		)
Cash and Cash Equivalents, Beginning of Period	27,367			37,197
Cash and Cash Equivalents, End of Period	$	28,554		$	30,337

The accompanying notes are an integral part of these condensed consolidated financial statements.

Table of Contents

AMTECH SYSTEMS, INC. AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

THREE MONTHS ENDED DECEMBER 31, 2014 AND 2013

(UNAUDITED)


1.	Basis of Presentation

Nature of Operations and Basis of Presentation – Amtech Systems, Inc. (the “Company” or "Amtech") designs, assembles, sells and installs capital equipment and related consumables used in the manufacture of wafers, primarily for the solar and semiconductor industries. The Company sells these products to manufacturers of solar cells, silicon wafers, and semiconductors worldwide, particularly in Asia, United States and Europe.

The Company serves solar and certain niche markets in industries that are experiencing rapid technological advances and which historically have been very cyclical. Therefore, future profitability and growth depend on the Company’s ability to develop or acquire and market profitable new products and on its ability to adapt to cyclical trends.

The accompanying unaudited condensed consolidated financial statements have been prepared pursuant to the rules and regulations of the Securities and Exchange Commission (the “SEC”), and consequently do not include all disclosures normally required by accounting principles generally accepted in the United States of America. In the opinion of management, the accompanying unaudited interim condensed consolidated financial statements contain all adjustments necessary, all of which are of a normal and recurring nature, to present fairly our financial position, results of operations and cash flows. Certain information and note disclosures normally included in financial statements have been condensed or omitted pursuant to the rules and regulations of the SEC. These condensed consolidated financial statements should be read in conjunction with the audited consolidated financial statements and notes thereto included in our Annual Report on Form 10-K for the fiscal year ended September 30, 2014.

The consolidated results of operations for the three months ended December 31, 2014, are not necessarily indicative of the results to be expected for the full fiscal year.

Principles of Consolidation – The condensed consolidated financial statements include the accounts of the Company, its wholly-owned subsidiaries and subsidiaries in which it has a controlling interest. The Company reports noncontrolling interests in consolidated entities as a component of equity separate from the Company's equity. All material intercompany accounts and transactions have been eliminated in consolidation.

Use of Estimates – The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Revenue Recognition - We review product and service sales contracts with multiple deliverables to determine if separate units of accounting are present. Where separate units of accounting exist, revenue allocated to delivered items is the lower of the relative selling price of the delivered items in the sales arrangement or the portion of the selling price that is not contingent upon performance of the service.

We recognize revenue when persuasive evidence of an arrangement exists; the product has been delivered and title has transferred, or services have been rendered; and the seller’s price to the buyer is fixed or determinable and collectability is reasonably assured. For us, this policy generally results in revenue recognition at the following points:

For our equipment business, transactions where legal title passes to the customer upon shipment, we recognize revenue upon shipment for those products where the customer’s defined specifications have been met with at least two similarly configured systems and processes for a comparably situated customer. Our selling prices typically include both equipment and services, i.e., installation and start-up services performed by our service technicians. The equipment and services are multiple deliverables. Our recognition of revenue upon delivery of equipment is limited to the lesser of (i) the total selling price minus the relative selling price of the undelivered services or (ii) the non-contingent amount. Since we defer only those costs directly related to installation or other unit of accounting not yet delivered and the portion of the contract price is often considerably greater than the relative selling price of those items, our policy at times will result in deferral of profit that is disproportionate in relation to the deferred revenue. When this is the case, the gross margin recognized in one period will be lower and the gross margin reported in a subsequent period will improve.

Table of Contents

For products where the customer’s defined specifications have not been met with at least two similarly configured systems and processes, the revenue and directly related costs are deferred at the time of shipment and later recognized at the time of customer acceptance or when this criterion has been met. We have, on occasion, experienced longer than expected delays in receiving cash from certain customers pending final installation or system acceptance. If some of our customers refuse to pay the final payment, or otherwise delay final acceptance or installation, the deferred revenue would not be recognized, adversely affecting our future cash flows and operating results.


3.	Sales of polishing supplies generally do not include process guarantees, acceptance criteria or holdbacks; therefore, the related revenue is generally recorded upon transfer of title which is generally at the time of shipment.


4.	Sales of spare parts and consumables are recognized upon shipment, as there are no post shipment obligations other than standard warranties.


5.	Service revenue is recognized upon performance of the services requested by the customer. Revenue related to service contracts is recognized ratably over the period of the contract or in accordance with the terms of the contract, which generally coincides with the performance of the services requested by the customer.

Deferred Profit – Revenue deferred pursuant to the Company’s revenue recognition policy, net of the related deferred costs, if any, is recorded as deferred profit in current liabilities. The components of deferred profit are as follows:



	December 31, 2014		September 30, 2014
	(dollars in thousands)
Deferred revenues	$	8,354	$	8,118
Deferred costs	2,927		1,210
Deferred profit	$	5,427	$	6,908

Concentrations of Credit Risk – Financial instruments that potentially subject the Company to significant concentrations of credit risk consist principally of trade accounts receivable and cash. The Company’s customers, located throughout the world, consist of manufacturers of solar cells, semiconductors, semiconductor wafers, light-emitting diodes (LEDs) and micro-electro-mechanical systems (MEMS). Credit risk is managed by performing ongoing credit evaluations of the customers’ financial condition, by requiring significant deposits where appropriate, and by actively monitoring collections. Letters of credit are required of certain customers depending on the size of the order, type of customer or its creditworthiness, and its country of domicile. Reserves for potentially uncollectible receivables are maintained based on an assessment of collectability.

The Company maintains its cash, cash equivalents and restricted cash in multiple financial institutions. Balances in the United States (approximately 60% of total cash balances) are primarily invested in U.S. Treasuries or are in financial institutions insured by the Federal Deposit Insurance Corporation (FDIC). The remainder of the Company’s cash is maintained in banks in The Netherlands, France and China that are uninsured.

As of December 31, 2014, one customer accounted for 11% of accounts receivable.

Restricted Cash – Restricted cash is $2.6 million and $2.4 million as of December 31, 2014, and September 30, 2014, respectively. The balance includes collateral for bank guarantees required by certain customers from whom deposits have been received in advance of shipment and cash received from research and development grants related to our ion implant technology to be used for research and development projects.

Accounts Receivable - Unbilled and Other – Unbilled and other accounts receivable consist mainly of the contingent portion of the sales price that is not collectible until successful installation of the product. These amounts are generally billed upon final customer acceptance. For the majority of these amounts, a liability has been accrued in deferred profit.

Inventories – Inventories are stated at the lower of cost or net realizable value. Approximately 70% of inventory is valued on an average cost basis with the remainder determined on a first-in, first-out (FIFO) basis. The components of inventories are as follows:

Table of Contents



	December 31, 2014		September 30, 2014
	(dollars in thousands)
Purchased parts and raw materials	$	8,148	$	8,797
Work-in-process	4,988		4,809
Finished goods	5,781		3,154
	$	18,917	$	16,760

Property, Plant and Equipment – Property, plant and equipment are recorded at cost. Maintenance and repairs are charged to expense as incurred. The cost of property retired or sold and the related accumulated depreciation are removed from the applicable accounts when disposition occurs and any gain or loss is recognized. Depreciation is computed using the straight-line method. Useful lives for equipment, machinery and leasehold improvements range from three to seven years; for furniture and fixtures from five to ten years; and for buildings twenty years.

The following is a summary of property, plant and equipment:



	December 31, 2014			September 30, 2014
	(dollars in thousands)
Land, building and leasehold improvements	$	10,053		$	10,414
Equipment and machinery	9,260			8,189
Furniture and fixtures	5,310			5,453
	24,623			24,056
Accumulated depreciation and amortization	(14,363		)	(14,304		)
	$	10,260		$	9,752

Goodwill - Goodwill is not subject to amortization and is reviewed for impairment on an annual basis, typically at the end of the fiscal year, or more frequently if circumstances dictate.

The following is a summary of activity in goodwill:



	Solar and Semiconductor Equipment			Polishing Supplies and Equipment		Total
	(dollars in thousands)
Balance at the beginning of year
Goodwill	$	12,315		$	728	$	13,043
Accumulated impairment losses	(4,720		)	—		(4,720		)
	7,595			728		8,323
Net exchange differences	(100		)	—		(100		)
Balance at the end of quarter
Goodwill	12,154			728		12,882
Accumulated impairment losses	(4,659		)	—		(4,659		)
	$	7,495		$	728	$	8,223

Intangibles – Intangible assets are capitalized and amortized over their useful life if the life is determinable. If the life is not determinable, amortization is not recorded. On December 24, 2014, the Company acquired a 51% controlling interest in SoLayTec, B.V. (“SoLayTec”), which provides atomic layer deposition (ALD) systems used in high efficiency solar cells. The intangible assets of SoLayTec total $5.0 million, and are included in "Other" in the table below. The fair value of the intangible assets, the

Table of Contents

allocation and the amortization period are still being evaluated by the Company. See Note 9, “Acquisition,” for more information regarding the acquisition of SoLayTec.

The following is a summary of intangibles:



	Useful Life	Gross Carrying Amount		Accumulated Amortization			Net Carrying Amount		Gross Carrying Amount		Accumulated Amortization			Net Carrying Amount
		December 31, 2014							September 30, 2014
		(dollars in thousands)
Non-compete agreements	4-8 years	$	1,048	$	(1,013	)	$	35	$	1,055	$	(955	)	$	100
Customer lists	10 years	783		(595		)	188		817		(592		)	225
Technology	5-10 years	2,252		(1,721		)	531		2,319		(1,682		)	637
In-process research and development	5 years	1,600		(107		)	1,493		1,600		(27		)	1,573
Other	2-10 years	5,294		(185		)	5,109		321		(178		)	143
		$	10,977	$	(3,621	)	$	7,356	$	6,112	$	(3,434	)	$	2,678

Long-lived assets - Long-lived assets are reviewed for impairment when events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable.

Warranty – A limited warranty is provided free of charge, generally for periods of 12 to 24 months, for all purchases of the Company’s new products and systems. Accruals are recorded for estimated warranty costs at the time the system is accepted by the customer.

The following is a summary of activity in accrued warranty expense:



	Three Months Ended December 31,
	2014			2013
	(dollars in thousands)
Beginning balance	$	628		$	1,454
Warranty expenditures	(228		)	(277		)
Warranty provisions/(adjustment)	307			(112		)
Ending balance	$	707		$	1,065

Stock-Based Compensation - The Company measures compensation costs relating to share-based payment transactions based upon the grant-date fair value of the award. Those costs are recognized as expense over the requisite service period, which is generally the vesting period. The benefits of tax deductions in excess of recognized compensation cost are credited to additional paid-in capital and reported as cash flow from financing activities rather than as cash flow from operating activities.

Share-based compensation expense reduced the Company’s results of operations by the following amounts:



	Three Months Ended December 31,
	2014			2013
	(dollars in thousands)
Effect on income before income taxes (1)	$	(232	)	$	(176	)
Effect on income taxes	36			40
Effect on net income	$	(196	)	$	(136	)

Table of Contents


(1)	Stock-based compensation expense is included in selling, general and administrative expenses.

Stock options issued under the terms of the plans have, or will have, an exercise price equal to or greater than the fair market value of the common stock at the date of the option grant and expire no later than 10 years from the date of grant, with the most recent grant expiring in 2024. Options issued by the Company vest over 2 to 4 years.

Stock option transactions and the options outstanding are summarized as follows:



	Three Months Ended December 31,
	2014				2013
	Options		Weighted Average Exercise Price		Options			Weighted Average Exercise Price
Outstanding at beginning of period	1,063,324		$	7.37	1,059,417			$	6.71
Granted	282,500		9.98		220,000			7.01
Exercised	—		—		(2,230		)	3.82
Forfeited	—		—		(2,114		)	8.03
Outstanding at end of period	1,345,824		$	7.91	1,275,073			$	6.76

Exercisable at end of period	802,703		$	7.81	924,593			$	7.04
Weighted average fair value of options granted during the period	$	6.09			$	4.38

The fair value of options was estimated at the grant date using the Black-Scholes option pricing model with the following assumptions:



	Three Months Ended December 31,
	2014	2013
Risk free interest rate	2%	2%
Expected life	6 years	6 years
Dividend rate	0%	0%
Volatility	67%	69%

To estimate expected lives for this valuation, it was assumed that options will be exercised at varying schedules after becoming fully vested. Forfeitures have been estimated at the time of grant and will be revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates. Forfeitures were estimated based upon historical experience. Fair value computations are highly sensitive to the volatility factor assumed; the greater the volatility, the higher the computed fair value of the options granted. The Company uses historical stock prices to determine the volatility factor.

The Company awards restricted shares under the existing share-based compensation plans. The Company's restricted share awards vest in equal annual installments over a two to four-year period. The total value of these awards is expensed on a ratable basis over the service period of the employees receiving the grants. The “service period” is the time during which the employees receiving grants must remain employees for the shares granted to fully vest.

Table of Contents

Restricted stock transactions and awards outstanding are summarized as follows:



	Three Months Ended December 31,
	2014				2013
	Awards		Weighted Average Grant Date Fair Value		Awards		Weighted Average Grant Date Fair Value
Beginning Outstanding	35,203		$	10.13	69,154		$	10.13
Released	(21,663	)	11.47		(30,828	)	10.08
Forfeited	—		—		—		—
Ending Outstanding	13,540		$	7.98	38,326		$	10.17

Fair Value of Financial Instruments

In accordance with the requirements of the Fair Value Measurements and Disclosures Topic of the Financial Accounting Standards Board ("FASB") Accounting Standards Codification ("ASC"), the Company groups its financial assets and liabilities measured at fair value on a recurring basis in three levels, based on the markets in which the assets and liabilities are traded and the reliability of the assumptions used to determine fair value. These levels are:

Level 1 - Valuation is based upon quoted market price for identical instruments traded in active markets.

Level 2 - Valuation is based on quoted market prices for similar instruments in active markets, quoted prices for identical or similar instruments in markets that are not active, and model-based valuation techniques for which all significant assumptions are observable in the market.

Level 3 - Valuation is generated from model-based techniques that use significant assumptions not observable in the market. Valuation techniques include use of discounted cash flow models and similar techniques.

In accordance with the requirements of the Fair Value Measurements and Disclosures Topic of the FASB ASC, it is the Company's policy to use observable inputs whenever reasonably practicable in order to minimize the use of unobservable inputs when developing fair value measurements. When available, the Company uses quoted market prices to measure fair value. If market prices are not available, the fair value measurement is based on models that use primarily market based parameters including interest rate yield curves, option volatilities and currency rates. In certain cases, where market rate assumptions are not available, the Company is required to make judgments about assumptions market participants would use to estimate the fair value of a financial instrument. Changes in the underlying assumptions used, including discount rates and estimates of future cash flows, could significantly affect the results of current or future values.

Cash, Cash Equivalents and Restricted Cash - Included in Cash and Cash Equivalents in the Condensed Consolidated Balance Sheets is $16.0 million and $17.0 million as of December 31, 2014 and September 30, 2014, respectively, of money market funds invested in treasury bills, notes and other direct obligations of the U.S. Treasury. The fair value of this cash equivalent is based on Level 1 inputs in the fair value hierarchy.

Receivables and Payables - The recorded amounts of these financial instruments, including accounts receivable and accounts payable, approximate their fair value because of the short maturities of these instruments. If measured at fair value in the financial statements, these financial instruments would be classified as Level 3 in the fair value hierarchy.

Debt - The recorded amounts of these financial instruments, including long-term debt and current maturities of long-term debt are measured at fair value in the financial statements, these financial instruments would be classified as Level 2 in the fair value hierarchy.

Pensions - The Company has retirement plans covering substantially all employees. The principal plans are the multiemployer defined benefit pension plans of the Company’s operations in The Netherlands and France and the plan for hourly union employees

Table of Contents

in Pennsylvania. The multiemployer plans in the United States and France are insignificant. The Company's defined contribution plans cover substantially all of the employees in the United States. The Company matches employee funds on a discretionary basis.

Shipping expense – Shipping expenses of $0.2 million and $0.3 million for the three months ended December 31, 2014 and 2013, respectively, are included in selling, general and administrative expenses.

Research and development expense – Research and development expenses consist of the cost of employees, consultants and contractors who design, engineer and develop new products and processes; materials and supplies used in those activities; and product prototyping. The Company receives reimbursements through governmental research and development grants which are netted against these expenses when certain conditions have been met. The table below shows gross research and development expenses and grants earned:



	Three Months Ended
	December 31, 2014			December 31, 2013
	(dollars in thousands)
Research and development	$	2,573		$	2,895
Grants earned	(736		)	(2,006		)
Net research and development	$	1,837		$	889

Impact of Recently Issued Accounting Pronouncements

In January 2015, the Financial Accounting Standards Board ("FASB") issued Accounting Standards Update ("ASU") No. 2015-1, Income Statement - Extraordinary and Unusual Items (Subtopic 225-20). The FASB is issuing this Update as part of its initiative to reduce costs and complexity in accounting standards, known as its Simplification Initiative. This Update eliminates from GAAP the concept of extraordinary items in an effort to save time and reduce costs, while alleviating uncertainty and maintaining accurate and fulsome disclosure. The amendments in this Update are effective for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2015. We are currently assessing the impact of this ASU but do not expect it to have a material impact on our consolidated financial position and results of operations.

In June 2014, the Financial Accounting Standards Board (FASB) issued Accounting Standards Update (ASU) No. 2014-12 which provides guidance on how to account for share-based payment awards where the terms of the award provide that a performance target that affects vesting could be achieved after the requisite service period. The ASU requires that a performance target that affects vesting and that could be achieved after the requisite service period be treated as a performance condition. ASU 2014-12 is effective for annual periods, and interim periods within those annual periods, beginning after December 15, 2015, and early adoption is permitted. We are currently assessing the impact of this ASU but do not expect it to have a material impact on our consolidated financial position and results of operations.

In May 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers, which supersedes most of the current revenue recognition requirements. The core principle of the new guidance is that an entity should recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for these goods or services. New disclosures about the nature, amount, timing and uncertainty of revenue and cash flows arising from contracts with customers are also required. This guidance is effective for the Company in the first quarter of fiscal year 2018 and early application is not permitted. Entities must adopt the new guidance using one of two retrospective application methods. The Company is currently evaluating the standard and the impact on our financial position and results of operations.

In April 2014, the FASB issued ASU No. 2014-08 "Presentation of Financial Statements (Topic 205) and Property, Plant and Equipment (Topic 360)." The amendments in this Update change the requirements for reporting discontinued operations in Subtopic 205-20. A discontinued operation may include a component of an entity or a group of components of an entity, or a business or nonprofit activity.

Under current U.S. GAAP, many disposals, some of which may be routine in nature and not a change in an entity's strategy, are reported in discontinued operations. The amendments in this Update improve the definition of discontinued operations by limiting

Table of Contents

discontinued operations reporting to disposals of components of an entity that represent strategic shifts that have (or will have) a major effect on an entity's operations and financial results.

The amendments in this Update require expanded disclosures for discontinued operations. The FASB concluded that those disclosures should provide users of financial statements with more information about the assets, liabilities, revenues, and expenses of discontinued operations.

The amendments in this Update also require an entity to disclose the pretax profit or loss of an individually significant component of an entity that does not qualify for discontinued operations reporting.

The amendments in this Update are effective for fiscal years, and interim periods within those years, beginning after December 15, 2014. The Company will evaluate the impact of the Update as future transactions occur.


2.	Income Taxes

The quarterly income tax provision is calculated using an estimated annual effective tax rate, based upon expected annual income, permanent items, statutory rates and planned tax strategies in the various jurisdictions in which the Company operates. However, losses in certain jurisdictions and discrete items are treated separately.

Deferred tax assets and liabilities reflect the tax effects of temporary differences between the carrying value of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. The Company records a valuation allowance if, based on the weight of available evidence, it is more likely than not that some portion or all of a deferred tax asset will not be realized. Our expectations regarding realization of our deferred tax assets is based upon the weight of all available evidence, including such factors as our recent earnings history, expected future taxable income and available tax planning strategies. The Company maintains a valuation allowance with respect to certain state and foreign deferred tax assets that may not be recovered. Each quarter, the valuation allowance is re-evaluated. During the three months ended December 31, 2014 the valuation allowance increased by $0.6 million due to net operating losses in The Netherlands, partially offset by utilization of net operating losses in China.

The Company classifies all of our uncertain tax positions as non-current income taxes payable. At December 31, 2014 and September 30, 2014, the total amount of unrecognized tax benefits was approximately $3.2 million. If recognized, these amounts would favorably impact the effective tax rate.

The Company classifies interest and penalties related to unrecognized tax benefits as income tax expense. As of December 31, 2014, and September 30, 2014, the Company has an accrual for potential interest and penalties of approximately $1.7 million and $1.6 million, respectively.

The Company and one or more of its subsidiaries file income tax returns in The Netherlands, Germany, France, China and Hong Kong, as well as the U.S. and various states in the U.S. The Company and its subsidiaries have a number of open tax years dictated by statute in each of the respective taxing jurisdictions, but generally is from 3 to 5 years.


3.	Earnings Per Share

Basic earnings per share (EPS) is computed by dividing net income (loss) by the weighted average number of common shares outstanding for the period. Diluted EPS is computed similarly to basic EPS except that the denominator is increased to include the number of additional common shares that would have been outstanding if potentially dilutive common shares had been issued. In the case of a net loss, diluted earnings per share is calculated in the same manner as basic EPS.

For the three months ended December 31, 2014, options for 1,346,000 shares and 14,000 restricted stock awards are excluded from the diluted EPS calculations because they are anti-dilutive. For the three months ended December 31, 2013, options for 1,275,000 shares and 38,000 restricted stock awards were excluded from the diluted EPS calculations because they were anti-dilutive.



	Three Months Ended December 31,
	2014			2013
	(in thousands, except per share amounts)
Basic Loss Per Share Computation
Net loss attributable to Amtech Systems, Inc.	$	(5,195	)	$	(794	)
Weighted Average Shares Outstanding:
Common stock	9,854			9,560
Basic loss per share attributable to Amtech shareholders	$	(0.53	)	$	(0.08	)
Diluted Loss Per Share Computation
Net loss attributable to Amtech Systems, Inc.	$	(5,195	)	$	(794	)
Weighted Average Shares Outstanding:
Common stock	9,854			9,560
Common stock equivalents (1)	—			—
Diluted shares	9,854			9,560
Diluted loss per share attributable to Amtech shareholders	$	(0.53	)	$	(0.08	)


(1)	The number of common stock equivalents is calculated using the treasury stock method and the average market price during the period.


4.	Business Segment Information

The Company’s products are classified into two business segments: the solar and semiconductor equipment segment and the polishing supplies segment. In the solar and semiconductor equipment segment, we are a leading supplier of thermal processing systems, including related automation, parts and services, to the solar/photovoltaic, semiconductor, silicon wafer and MEMS industries and also offer PECVD (plasma-enhanced chemical vapor deposition) equipment. On December 24, 2014, the Company expanded our participation in the solar market by acquiring a 51% controlling interest in SoLayTec, B.V., which provides atomic layer deposition systems used in high efficiency solar cells. In the polishing supplies segment, the Company produces consumables and machinery for lapping (fine abrading) and polishing of materials, such as sapphire substrates, optical components, silicon wafers, numerous types of crystal materials, ceramics and metal components.

Table of Contents

Information concerning our business segments is as follows:



	Three Months Ended
	December 31, 2014			December 31, 2013
	(dollars in thousands)
Net Revenues:
Solar and semiconductor equipment	$	9,018		$	12,564
Polishing supplies and equipment	3,378			2,208
	$	12,396		$	14,772
Operating income (loss):
Solar and semiconductor equipment	$	(2,595	)	$	349
Polishing supplies and equipment	742			418
Non-segment related	(2,940		)	(1,245		)
	$	(4,793	)	$	(478	)



	December 31, 2014		September 30, 2014
	(dollars in thousands)
Identifiable Assets:
Solar and semiconductor equipment	$	91,507	$	83,651
Polishing supplies and equipment	6,016		6,253
	$	97,523	$	89,904

5. Major Customers and Foreign Sales

During the three months ended December 31, 2014, two customer individually represented 12% and 11% of net revenues. During the three months ended December 31, 2013, two customers individually represented 33% and 23% of net revenues.

Our net revenues were to customers in the following geographic regions:



	Three Months Ended December 31,
	2014		2013
United States	23	%	42	%

China	26	%	11	%
Taiwan	19	%	11	%
Other	6	%	11	%
Total Asia	51	%	33	%
Germany	10	%	8	%
Other	16	%	17	%
Total Europe	26	%	25	%
	100	%	100	%

6. Other Accrued Liabilities

Other accrued liabilities consist of the following:

Table of Contents



	December 31, 2014		September 30, 2014
	(dollars in thousands)
Unearned research and development grants	$	5,507	$	3,989
Other	4,184		1,357
	$	9,691	$	5,346

7. Long-term Debt

In December 2014, the Company acquired long-term debt as part of the SoLayTec acquistion. The debt acquired is stated at fair market value of $2.0 million as of December 31, 2014. The debt acquired has interest rates ranging from 5.95% to 10% and maturity dates ranging from fiscal 2017 to fiscal 2021.

8. Commitments and Contingencies

Purchase Obligations – As of December 31, 2014 the Company had purchase obligations in the amount of $15.0 million compared to $7.9 million as of September 30, 2014. These purchase obligations consist of outstanding purchase orders for goods and services. While the amount represents purchase agreements, the actual amounts to be paid may be less if any agreements are renegotiated, canceled or terminated.

Development projects – In fiscal 2014, Tempress Systems, Inc. ("Tempress") entered into an agreement with the Energy Research Centre of the Netherlands ("ECN"), a Netherlands government sponsored research institute, for a joint research and development project. Under the terms of the agreement, Tempress sold an ion implanter ("Equipment") to ECN for $1.4 million. Both Tempress and ECN are performing research and development projects utilizing the Equipment at the ECN facilities. Each party to the agreement will have 100% rights to the results of the projects developed separately by the individual parties. Any results co-developed will be jointly owned. Over the four -year period of the agreement, Tempress is required to contribute $1.4 million to the project in the form of installation of the equipment, acceptance testing, project meeting attendance, training, parts, and service, including keeping the equipment in good condition and repair for the first two years of the agreement.

In 2013, Shanghai Kingstone Semiconductor Company Ltd. ("Kingstone") entered into an agreement with certain government agencies in Shanghai, China for the purpose of developing ion implant technology for non-solar applications. Kingstone has substantially completed the first phase of this development project and received $3.6 million of grant funds for the project. Kingstone is investigating options for securing funding for their $6.1 million of its commitment to the project. The remainder of Kingstone's commitment is to be in place by December 2015. Amtech owns 55% of Kingstone Technology Hong Kong Limited, which owns 100% of Shanghai Kingstone Semiconductor Company Ltd. Amtech has no obligation or plan to fund Kingstone's commitments under this agreement.

Litigation – The Company and its subsidiaries are defendants from time to time in actions for matters arising out of their business operations. On October 21, 2014, the Company entered into an Agreement and Plan of Merger (the "Merger Agreement") by and among the Company, BTU Merger Sub, Inc., a Delaware corporation (the "Merger Sub"), and BTU International, Inc. a Delaware corporation ("BTU"). Shortly after the Company entered into the Merger Agreement with BTU, two separate putative stockholder class action complaints were filed in the Court of Chancery of the State of Delaware (together, the "Stockholder Actions"). The first was filed on November 4, 2014 and the second on November 17, 2014, purportedly on behalf of BTU’s public stockholders, against BTU, the members of the BTU Board, Amtech and Merger Sub. The Stockholder Actions were consolidated into one action on December 4, 2014. These complaints generally allege, among other things, that the members of BTU’s board of directors breached their fiduciary duties owed to BTU’s public stockholders by failing to engage in a competitive sale and bidding process, by causing BTU to enter into the Merger Agreement and by approving the merger, and that the Company and Merger Sub aided and abetted such alleged breaches of fiduciary duties. These complaints further allege that these fiduciary breaches gave the Company an unfair advantage as a result of BTU's alleged failure to solicit other potential acquirers and also that the Merger Agreement improperly favors the Company and unduly restricts BTU’s ability to negotiate with other potential bidders. The complaint generally seeks, among other things, declaratory and injunctive relief concerning the alleged fiduciary breaches, injunctive relief prohibiting the Company, Merger Sub, and BTU from consummating the Merger, other forms of equitable relief, and compensatory damages.

Table of Contents

On January 16, 2015, the Company and BTU, along with the other defendants named therein, entered into a memorandum of understanding (the “MOU”) to settle the Stockholder Actions. Pursuant to the MOU, the parties to the Stockholder Actions agreed to resolve the claims alleged and the Company and BTU agreed to make certain additional disclosures regarding the Merger. The MOU is expected to be memorialized in a stipulation of settlement, which will be subject to customary terms and conditions, including court approval, and will include an agreement by the plaintiffs in the Stockholder Actions, on behalf of each stockholder class, to provide a release of all claims against the Company and BTU, along with the other defendants named therein, subject to an exception for certain securities law claims. In addition, as part of the settlement, BTU has agreed to be responsible for the payment of certain amounts in plaintiffs’ attorney fees and expenses in connection with the settlement. The Company and BTU entered into the MOU solely to avoid the costs, risks and uncertainties inherent in litigation and without admitting any liability or wrongdoing. There can be no assurance that the parties will ultimately enter into a stipulation of settlement or that the court will approve such settlement. In such event, the proposed settlement as contemplated by the MOU may be terminated.

The merger was consummated on January 30, 2015. The plaintiffs’ attorney fees and expenses will be reflected as a liability on the opening balance sheet of BTU on the date of the merger. See Note 10, "Subsequent Event," for more information on the Merger Agreement.

9. Acquisition

On December 24, 2014, the Company expanded our participation in the solar market by acquiring a 51% controlling interest in SoLayTec, B.V., which provides atomic layer deposition (ALD) systems used in high efficiency solar cells, for total purchase price consideration of $1.9 million.

As of December 31, 2014, the accounting for the SoLayTec acquisition has not been finalized due to pending items on the valuation of acquired assets and liabilities. Based on a preliminary assessment, the Company recorded $5.0 million in intangible assets as of December 31, 2014. Transaction costs in connection with our acquisition of SoLayTec were not material to our quarter ended December 31, 2014.

The Company consolidated the results of operations for SoLayTec beginning on December 24, 2014, the effective date of the acquisition, which were not material to our consolidated statement of operations for the three months ended December 31, 2014. Additionally, the Company's historical results would not have been materially affected by the acquisition of SoLayTec and, accordingly, has not presented pro forma information as if the acquisition had been completed at the beginning of each period presented in our consolidated statements of operations.

10. Subsequent Event

On January 30, 2015, the Company completed its previously announced Merger Agreement, pursuant to which Merger Sub was merged with and into BTU (the “Merger”), with BTU surviving as a wholly owned subsidiary of the Company. In connection with the merger, each share of BTU common stock, par value $0.01 per share, issued and outstanding immediately prior to the effective time of the Merger was converted to 0.3291 shares of common stock, par value $0.01 per share, of the Company. The Company issued approximately 3,186,000 total shares of Company common stock on the Merger date. Pursuant to the terms of the Merger agreement, BTU employee based stock options were assumed by the Company and converted into options to purchase shares of Company common stock on substantially the same terms and conditions as were applicable to such BTU stock option, with appropriate adjustments based upon the Exchange Ratio to the exercise price and the number of shares of Company common stock subject to such stock option. Each BTU restricted stock unit that remained unvested immediately prior to January 30, 2015, the effective time of the Merger, became a fully vested and unrestricted share of BTU common stock. As a result of this merger, the Company owns 100% of the outstanding stock of BTU.

The Company will account for the transaction as a business combination using the acquisition method of accounting. Due to the limited time between the acquisition date and the filing of this Quarterly Report on Form 10-Q for the quarter ended December 31, 2014, the initial purchase accounting has not been completed. As such, it is not practicable for the Company to disclose: (i) the allocation of purchase price to assets acquired and liabilities assumed, and (ii) pro forma revenues and earnings of the combined company for the quarter ended December 31, 2014. The Company will provide this information in its Quarterly Report on Form 10-Q for the quarter ended March 31, 2015. There are approximately $1.2 million in acquisition-related costs included in selling, general and administrative expenses for the three-month period ended December 31, 2014.

Table of Contents


Item 2.	MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following discussion and analysis of our financial condition and results of operations should be read in conjunction with our condensed consolidated financial statements and the related notes included in Item 1, “Condensed Consolidated Financial Statements” in this quarterly report on Form 10-Q and our consolidated financial statements and related notes included in Item 8, “Financial Statements and Supplementary Data” in our Annual Report on Form 10-K for the fiscal year ended September 30, 2014.

Cautionary Statement Regarding Forward-Looking Statements

Certain information contained or incorporated by reference in this Quarterly Report on Form 10-Q is forward-looking in nature. All statements included or incorporated by reference in this Quarterly Report on Form 10-Q, or made by management of Amtech Systems, Inc. and its subsidiaries (“the Company” or “Amtech”), other than statements of historical fact, are hereby identified as “forward-looking statements” (as such term is defined in Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended). In some cases, forward-looking statements can be identified by terminology such as “may,” “will,” “should,” “would,” “expects,” “plans,” “anticipates,” “intends,” “believes,” “estimates,” “predicts,” “potential,” “continue,” or the negative of these terms or other comparable terminology. Examples of forward-looking statements include statements regarding Amtech's future financial results, operating results, business strategies, projected costs, products under development, competitive positions and plans and objectives of the Company and its management for future operations.

We cannot guarantee that any forward-looking statement will be realized, although we believe that the expectations reflected in the forward-looking statements are reasonable. Achievement of future results is subject to risks, uncertainties and potentially inaccurate assumptions. The Form 10-K that we filed with the Securities and Exchange Commission for the year-ended September 30, 2014 listed various important factors that could affect Amtech's future operating results and financial condition and could cause actual results to differ materially from historical results and expectations based on forward-looking statements made in this document or elsewhere by Amtech or on its behalf. These factors can be found under the heading “Risk Factors” in the Form 10-K and investors should refer to them. Because it is not possible to predict or identify all such factors, any such list cannot be considered a complete set of all potential risks or uncertainties. Except as required by law, we undertake no obligation to publicly update forward-looking statements, whether as a result of new information, future events, or otherwise.

Introduction

Management’s Discussion and Analysis (“MD&A”) is intended to facilitate an understanding of our business and results of operations. MD&A consists of the following sections:


•	Overview


•	Results of Operations


•	Liquidity and Capital Resources


•	Off – Balance Sheet Arrangements


•	Contractual Obligations


•	Critical Accounting Policies


•	Impact of Recently Issued Accounting Pronouncements

Overview

We operate in two segments: (i) the solar and semiconductor equipment segment and (ii) the polishing supplies segment. In our solar and semiconductor equipment segment, we are a leading supplier of thermal processing systems, including related automation, parts and services, to the solar/photovoltaic, semiconductor, silicon wafer and MEMS industries and also offer PECVD (plasma-enhanced chemical vapor deposition) equipment to the solar market. In our polishing supplies segment, we produce consumables and machinery for lapping (fine abrading) and polishing of materials, such as sapphire substrates, optical components, silicon wafers, numerous types of crystal materials, ceramics and metal components. Since the 2011 acquisition of Kingstone Technology Hong Kong, Limited ("Kingstone"), a holding company that owns 100% of Kingstone Semiconductor Company Ltd., a Shanghai-based technology company specializing in ion implant solutions for the solar industry, we have advanced the development of an ion implanter to provide our solar customers with a more complete solution for their next-generation high-efficiency solar cell production.

Our customers are primarily manufacturers of solar cells and integrated circuits. The solar cell and semiconductor industries are cyclical and historically have experienced significant fluctuations. Our revenue is impacted by these broad industry trends. In 2012 and 2013, the solar cell industry experienced a structural imbalance between supply and demand. This imbalance has negatively impacted our results of operations and is expected to do so in the future.

Our strategy has been, and continues to be, to grow the Company through strategic product development and acquisitions. In addition to internal product development, we have acquired companies with complementary products or products that serve adjacent process steps. In October 2007, we acquired R2D Automation SAS, which allowed us to provide our diffusion furnaces with integrated automation that is also sold as a stand-alone product. In February 2011, we acquired a 55% ownership interest in Kingstone. On December 24, 2014, we expanded our participation in the solar market by acquiring a 51% controlling interest in SoLayTec, B.V., which provides atomic layer deposition systems used in high efficiency solar cells.

Results of Operations

The following table sets forth certain operational data as a percentage of net revenue for the periods indicated:



	Three Months Ended
	December 31, 2014		December 31, 2013
Net revenue	100	%	100	%
Cost of goods sold	72	%	69	%
Gross margin	28	%	31	%
Operating expenses:
Selling, general and administrative	52	%	28	%
Research and development	15	%	6	%
Total operating expenses	67	%	34	%
Loss from operations	(39	)%	(3	)%
Interest and other income, net	1	%	1	%
Loss before income taxes	(38	)%	(2	)%
Income taxes provision	1	%	4	%
Net loss	(39	)%	(6	)%
Add: net loss (income) attributable to noncontrolling interest	(3	)%	1	%
Net loss attributable to Amtech Systems, Inc.	(42	)%	(5	)%

Net Revenue

Net revenue consists of revenue recognized upon shipment or installation of products using proven technology and upon acceptance of products using new technology. In addition, spare parts sales are recognized upon shipment. Service revenue is recognized upon completion of the service activity or ratably over the term of the service contract. Since the majority of our revenue is generated from large system sales, revenue and operating income can be significantly impacted by the timing of system shipments, and recognition of revenue based on customer acceptances.

Table of Contents



	Three Months Ended December 31,
Segment	2014		2013		Inc (Dec)			%
	(dollars in thousands)
Solar and semiconductor equipment segment	$	9,018	$	12,564	$	(3,546	)	(28	)%
Polishing supplies segment	3,378		2,208		1,170			53	%
Total net revenue	$	12,396	$	14,772	$	(2,376	)	(16	)%

Net revenue for the quarters ended December 31, 2014 and 2013 was $12.4 million and $14.8 million, respectively, a decrease of $2.4 million or 16%. Revenue from the solar and semiconductor equipment segment decreased 28% due primarily to lower shipments to the semiconductor industry caused by the cyclical nature of this industry and our dependence on a relatively small number of customers. Net revenue from the solar market was $6.7 million and $6.6 million for the three months ended December 31, 2014 and 2013, respectively.

Increased revenues from the polishing supplies segment resulted mainly from continuing increases in sales of polishing templates, which are used in single-sided polishing processes. Sales of polishing templates have improved due primarily to the increased demand for sapphire substrates used in LED lighting and mobile communication devices.

Backlog and Orders

Our order backlog as of December 31, 2014 and 2013 was $48.3 million and $23.3 million, respectively, an increase of 107%. Our backlog as of December 31, 2014 includes approximately $37.5 million of orders and deferred revenue from our solar industry customers, compared to $14.1 million at December 31, 2013. New orders booked in the quarter ended December 31, 2014 were $30.0 million versus $9.8 million of customer orders in the quarter ended December 31, 2013. As of December 31, 2014, three customers individually accounted for 26%, 15% and 15% of our backlog. The orders included in our backlog are generally credit approved customer purchase orders expected to ship within the next twelve months. Because our orders are typically subject to cancellation or delay by the customer, our backlog at any particular point in time is not necessarily representative of actual sales for succeeding periods, nor is backlog any assurance that we will realize profit from completing these orders. Our backlog also includes revenue deferred pursuant to our revenue recognition policy, derived from orders that have already been shipped, but which have not met the criteria for revenue recognition.

Gross Profit and Gross Margin

Gross profit is the difference between net revenue and cost of goods sold. Cost of goods sold consists of purchased material, labor and overhead to manufacture equipment and spare parts and the cost of service and support to customers for installation, warranty and paid service calls. Gross margin is gross profit as a percent of net revenue.



	Three Months Ended December 31,
Segment	2014		2013		Inc (Dec)			%
	(dollars in thousands)
Solar and semiconductor equipment segment	$	2,221	$	3,724	$	(1,503	)	(40	)%
Polishing supplies segment	1,207		811		396			49	%
Total gross profit	$	3,428	$	4,535	$	(1,107	)	(24	)%

Gross profit for the three months ended December 31, 2014 and 2013 was $3.4 million and $4.5 million, respectively; a decrease of $1.1 million. Gross margin on products from our solar and semiconductor equipment segment was 25% in the quarter ended December 31, 2014, compared to 30% in the quarter ended December 31, 2013. Lower gross margins in the first quarter of fiscal 2015 were primarily due to lower levels of solar and semiconductor equipment shipments, partially offset by recognition of previously-deferred profit related to customer acceptance of an ion implanter and utilization of previously written-down inventory. In the quarter ended December 31, 2014, we recognized net deferred profit of $1.3 million compared to a net deferral of profit of $3.6 million in the quarter ended December 31, 2013.

Table of Contents

Gross margin on products from our polishing supplies segment was 36% in the quarter ended December 31, 2014, compared to 37% in the quarter ended December 31, 2013, the slight decrease was due mainly to product mix.

Selling, General and Administrative

Selling, general and administrative expenses consist of the cost of employees, consultants and contractors, facility costs, sales commissions, shipping costs, promotional marketing expenses, legal, accounting expenses and bad debt expense.



	Three Months Ended December 31,
Segment	2014		2013		Inc (Dec)		%
	(dollars in thousands)
Solar and semiconductor equipment segment	$	5,790	$	3,613	$	2,177	60	%
Polishing supplies segment	594		511		83		16	%
Total selling, general and administrative expenses	$	6,384	$	4,124	$	2,260	55	%

Selling, general and administrative (SG&A) expenses for the three months ended December 31, 2014 and 2013 were $6.4 million and $4.1 million, respectively. The increase results primarily from expenses related to activity that led to our acquisition of BTU International and SoLayTec, as well as increased commission expense resulting from higher commission rates on certain sales. Stock-based compensation expense was $0.2 million for each of the three month periods ending December 31, 2014 and 2013.

SG&A expenses in the polishing supplies segment increased primarily due to higher selling expenses related to higher revenues.

Research and Development

Research and development expenses consist of the cost of employees, consultants and contractors who design, engineer and develop new products and processes as well as materials and supplies used in producing prototypes. Reimbursement of research and development costs in the form of governmental research and development grants are netted against these expenses.



	Three Months Ended December 31,
	2014			2013			Incr. (Decr.)			% change
	(dollars in thousands)
Research and development	$	2,573		$	2,895		$	(322	)	(11	)%
Grants earned	(736		)	(2,006		)	1,270			(63	)%
Net research and development	$	1,837		$	889		$	948		107	%

Research and development ("R&D") expense (net of grants earned) for the three months ended December 31, 2014 increased $0.9 million compared to the three months ended December 31, 2013. The increase in net R&D expense is due to a decrease in the recognition of government grant funding, partially offset by a decrease in spending. Gross R&D spending decreased due primarily to lower activity in the development of ion implant technology as we reach more advanced stages of this development project.

As described in our Annual report on Form 10-K for the fiscal year ended September 30, 2014, our Kingstone subsidiary has entered into an agreement for the development of ion implant technology in China for markets other than solar. Depending on its progress, as well as the timing of grant recognition, this development project may result in significant quarter-to-quarter fluctuations in research and development expenses.

Income Taxes

For the three months ended December 31, 2014 and 2013 we recorded income tax expense of $0.2 million and $0.6 million, respectively. The income tax provisions are based upon estimates of annual income, annual permanent differences and statutory

Table of Contents

tax rates in the various jurisdictions in which we operate, except that certain loss jurisdictions and discrete items are treated separately. During the quarter, the valuation allowance on deferred assets increased due to losses in the Netherlands partially offset due to income in China, resulting in no tax benefit being recognized on the losses in the Netherlands and no tax expense being recognized on the current quarter profit in China.

The Financial Accounting Standards requires that a valuation allowance be established when it is “more likely than not” that all or a portion of deferred tax assets will not be realized. A review of all available positive and negative evidence needs to be considered, including a company’s performance, the market environment in which the company operates and the length of carryback and carryforward periods. According to those standards, it is difficult to conclude that a valuation allowance is not needed when the negative evidence includes cumulative losses in recent years. Therefore, cumulative losses weigh heavily in the overall assessment. Available tax planning strategies cause us to believe that it is more likely than not the deferred tax assets related to the United States tax jurisdiction will be realized despite cumulative losses there. As a result of the review, the Company continues to have a full valuation allowance on the deferred tax assets related to the Netherlands and China and a partial valuation allowance on the deferred tax assets in France.

Our future effective income tax rate depends on various factors, such as the amount of income (loss) in each tax jurisdiction, tax regulations governing each region, non-tax deductible expenses incurred as a percent of pre-tax income and the effectiveness of our tax planning strategies. At the end of 2011, we restructured our European operations to lower the tax rate on the Netherlands operations from 35% to a marginal rate of 25%, as we intend to permanently reinvest future Dutch earnings in our foreign operations. The effect of the restructure on our tax rate depends on the amount of income or loss earned in the Netherlands, as well as the portion of such income that can be demonstrated to have been derived from qualified new technologies, as well as the factors mentioned above.

Liquidity and Capital Resources

At December 31, 2014, and September 30, 2014, cash and cash equivalents were $28.6 million and $27.4 million, respectively. At December 31, 2014, and September 30, 2014, restricted cash was $2.6 million and $2.4 million, respectively. Our working capital was $24.7 million as of December 31, 2014 and $32.3 million as of September 30, 2014.

The increase in cash for the first three months of fiscal 2015 of $1.2 million was primarily due to cash provided by operating activities of $1.9 million, partially offset by cash used in investing activities, both discussed below. We maintain a portion of our cash and cash equivalents in Euros at our Dutch and French operations; therefore, changes in the exchange rate have an impact on our cash balances. Our ratio of current assets to current liabilities was 1.6:1 and 2.0:1 as of December 31, 2014, and September 30, 2014, respectively. We expect to make a tax payment of approximately $5.0 million in June 2015. We have never paid dividends on our Common Stock.

The success of our growth strategy is dependent upon the availability of additional capital resources on terms satisfactory to management. Our sources of capital in the past have included the sale of equity securities, which include common and preferred stock sold in private transactions and public offerings, capital leases and long-term debt. We believe that our principal sources of liquidity discussed above are sufficient to support operations for at least the next twelve months.

Cash Flows from Operating Activities

Cash provided by our operating activities was $1.9 million for the three months ended December 31, 2014, compared to $6.9 million used by such activities for the three months ended December 31, 2013. During the three months ended December 31, 2014, $2.4 million was provided through the collections of accounts receivables, and approximately $6.4 million of customer deposits received for future orders. These increases were offset by losses on operations of $4.8 million and the purchase of inventories of $0.5 million to be used to fulfill future orders. During the three months ended December 31, 2013, increases in accounts receivable and decreases in customer deposits were significant uses of cash, partially offset by decreases in inventory and prepaid expenses.

Cash Flows from Investing Activities

Table of Contents

Our investing activities for each of the three month periods ended December 31, 2014 and 2013 consisted of purchases of property, plant and equipment of approximately $0.2 million. In December 2014, we acquired a 51% interest SoLayTec, a provider of atomic layer deposition located in The Netherlands for an investment of $0.3 million net of the cash of the acquired company.

Cash Flows from Financing Activities

For the three months ended December 31, 2014 and December 31, 2013 there were no significant cash flows from financing activities.

Off-Balance Sheet Arrangements

As of December 31, 2014, Amtech had no off-balance sheet arrangements as defined in Item 303(a)(4) of Regulation S-K promulgated by the Securities and Exchange Commission.

Contractual Obligations

Purchase obligations were $15.0 million as of December 31, 2014, compared to $7.9 million as of September 30, 2014, an increase of $1.4 million. In December 2014, the Company acquired long-term debt as part of the SoLayTec acquistion. The debt acquired is stated at fair market value of $2.0 million as of December 31, 2014. The debt acquired has interest rates ranging from 5.95% to 10% and maturity dates ranging from fiscal 2017 to fiscal 2021. Refer to Amtech’s annual report on Form 10-K for the year ended September 30, 2014, for information on the Company’s other contractual obligations.

Critical Accounting Policies

“Management’s Discussion and Analysis of Financial Condition and Results of Operations” discusses our condensed consolidated financial statements that have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these condensed consolidated financial statements requires us to make estimates and assumptions that affect the reported amount of assets and liabilities at the date of the condensed consolidated financial statements, the disclosure of contingent assets and liabilities at the date of the condensed consolidated financial statements and the reported amounts of revenue and expenses during the reporting period.

On an ongoing basis, we evaluate our estimates and judgments, including those related to revenue recognition, inventory valuation, accounts and notes receivable collectability, warranty and impairment of long-lived assets. We base our estimates and judgments on historical experience and on various other factors that we believe to be reasonable under the circumstances. The results of these estimates and judgments form the basis for making conclusions about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

A critical accounting policy is one that is both important to the presentation of our financial position and results of operations, and requires management’s most difficult, subjective or complex judgments, often as a result of the need to make estimates about the effect of matters that are inherently uncertain. These uncertainties are discussed in Part I, Item 1A of our Annual Report on Form 10-K for the year ended September 30, 2014. We believe our critical accounting policies relate to the more significant judgments and estimates used in the preparation of our consolidated financial statements.

We believe the critical accounting policies discussed in the section entitled “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations – Critical Accounting Policies” in our Annual Report on Form 10-K for the fiscal year ended September 30, 2014 represent the most significant judgments and estimates used in the preparation of our consolidated financial statements. There have been no significant changes in our critical accounting policies during the three months ended December 31, 2014.

Impact of Recently Issued Accounting Pronouncements

For discussion of the impact of recently issued accounting pronouncements, see “Item 1: Financial Information” under “Impact of Recently Issued Accounting Pronouncements”.


Item 3.	QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Table of Contents

We are exposed to foreign currency exchange rates to the extent sales contracts, purchase contracts, assets or liabilities of our operations are denominated in currencies other than their functional currency. Our operations in the United States are conducted in their functional currency, the U.S. dollar. Our operations in Europe and China conduct business primarily in their functional currencies, the Euro and Renminbi, respectively, and occasionally enter into transactions in the U.S. dollar. It is highly uncertain how currency exchange rates will fluctuate in the future. Actual changes in foreign exchange rates could adversely affect our operating results or financial condition.

During fiscal 2014 and in the first three months of fiscal 2015, we did not hold any stand-alone or separate derivative instruments. We incurred net foreign currency transaction gains or losses of less than $0.1 million during the three months ended December 31, 2014 and 2013. As of December 31, 2014, our foreign subsidiaries had $1.8 million of assets (cash and accounts receivable) denominated in currencies other than their functional currency. A 10% change in the value of the functional currency relative to the non-functional currency would result in a gain or loss of $0.2 million. As of December 31, 2014, we had $1.6 million of accounts payable, consisting of amounts owed by our foreign subsidiaries to our U.S. companies, denominated in U.S. dollars. Although the intercompany accounts are eliminated in consolidation, a 10% change in the value of the Euro relative to the U.S. dollar would result in a gain or loss of $0.2 million.

We incurred foreign currency translation losses of $1.1 million and gains of $0.7 million during the three months ended December 31, 2014, and 2013, respectively, a type of other comprehensive income (loss), which is a direct adjustment to stockholders’ equity. Our net investment in and advances to our foreign operations totaled $21.7 million as of December 31, 2014. A 10% change in the value of the foreign currencies relative to the U.S. dollar would cause approximately $2.2 million of other comprehensive income (loss).

During the three months ended December 31, 2014 and 2013, U.S. dollar denominated sales of our European operations were $0.5 million and $0.6 million, respectively. As of December 31, 2014, sales commitments denominated in a currency other than the functional currency of our transacting operation totaled $0.2 million. Our lead-times to fulfill these commitments generally range between 13 and 26 weeks. A 10% change in the relevant exchange rates between the time the order was taken and the time of shipment would not cause our gross profit on such orders to be significantly greater or less than expected on the date the order was taken. As of December 31, 2014, purchase commitments denominated in a currency other than the functional currency of our transacting operation totaled $0.6 million. A 10% change in the relevant exchange rates between the time the purchase order was placed and the time the order is received would not cause our cost of such items to be significantly greater or less than expected on the date the purchase order was placed. During the three months ended December 31, 2014, we had net revenues of $7.8 million denominated in currencies other than the U.S. dollar. A 10% chance in exchange rates would result in and increase or decrease in net revenues of $0.1 million.


Item 4.	CONTROLS AND PROCEDURES

Disclosure Controls and Procedures

Our management, including the Chief Executive Officer (“CEO”) and the Chief Financial Officer (“CFO”), has carried out an evaluation of the effectiveness of our disclosure controls and procedures as of December 31, 2014, pursuant to Exchange Act Rules 13a-15(e) and 15(d)-15(e). Disclosure controls and procedures means controls and other procedures that are designed to ensure that information required to be disclosed by the Company in the reports it files or submits under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission's rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act is accumulated and communicated to management, including the principal executive and principal financial officer, as appropriate to allow timely decisions regarding required disclosure. Based upon that evaluation, our CEO and CFO have concluded that as of such date, our disclosure controls and procedures in place were effective.

Changes in Internal Control Over Financial Reporting

There has been no change in Amtech’s internal control over financial reporting during the three months ended December 31, 2014 that has materially affected, or is reasonably likely to materially affect, its internal control over financial reporting.

Table of Contents

PART II. OTHER INFORMATION


Item 1.	Legal Proceedings

The Company and its subsidiaries are defendants from time to time in actions for matters arising out of their business operations. As previously disclosed, shortly after the Company entered into the Merger Agreement with BTU, two separate putative stockholder class action complaints were filed in the Court of Chancery of the State of Delaware (together, the "Stockholder Actions"). The first was filed on November 4, 2014 and the second on November 17, 2014, purportedly on behalf of BTU’s public stockholders, against BTU, members of the BTU Board, Amtech and Merger Sub. The Stockholder Actions were consolidated on December 4, 2014. These complaints generally allege, among other things, that the members of BTU’s board of directors breached their fiduciary duties owed to BTU’s public stockholders by failing to engage in a competitive sale and bidding process, by causing BTU to enter into the Merger Agreement and by approving the merger, and that the Company and Merger Sub aided and abetted such alleged breaches of fiduciary duties. These complaints further allege that these fiduciary breaches gave the Company an unfair advantage as a result of BTU's alleged failure to solicit other potential acquirers and also that the Merger Agreement improperly favors the Company and unduly restricts BTU’s ability to negotiate with other potential bidders. The complaint generally seeks, among other things, declaratory and injunctive relief concerning the alleged fiduciary breaches, injunctive relief prohibiting the Company, Merger Sub, and BTU from consummating the Merger, other forms of equitable relief, and compensatory damages.


Item 1A.	Risk Factors

The most significant risk factors applicable to Amtech are described in Part I, Item 1A (Risk Factors) of Amtech’s Annual Report on Form 10-K for the fiscal year ended September 30, 2014 (our “2014 Form 10-K”). There have been no material changes to the risk factors previously disclosed on our fiscal 2014 Form 10-K.


Item 2.	Unregistered Sales of Equity Securities and Use of Proceeds

None.


Item 3.	Defaults Upon Senior Securities

None.


Item 4.	Mine Safety Disclosures

Not applicable.


Item 5.	Other Information

None.


Item 6.	Exhibits

Table of Contents



2.1	Agreement and Plan of Merger, dated October 21, 2014, by and among Amtech Systems, Inc., BTU Merger Sub, Inc., and BTU International, Inc. (incorporated by reference to Exhibit 2.1 the Company's Current Report on Form 8-K, filed with the SEC on October 23,2014).

31.1	Certification of Chief Executive Officer Pursuant to Rule 13a-14(a)/15d-14(a) of the Securities Exchange Act of 1934, as Amended	*

31.2	Certification of Chief Financial Officer Pursuant to Rule 13a-14(a)/15d-14(a) of the Securities Exchange Act of 1934, as Amended	*

32.1	Certification of Chief Executive Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002	*

32.2	Certification of Chief Financial Officer Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002	*

101.INS	XBRL Instance Document	*

101.SCH	XBRL Taxonomy Extension Schema Document	*

101.PRE	Taxonomy Presentation Linkbase Document	*

101.CAL	XBRL Taxonomy Calculation Linkbase Document	*

101.LAB	XBRL Taxonomy Label Linkbase Document	*

101.DEF	XBRL Taxonomy Extension Definition Linkbase Document	*

____________________


*	Filed herewith.

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

AMTECH SYSTEMS, INC.



By	/s/ Bradley C. Anderson	Dated:	February 5, 2015
	Bradley C. Anderson
	Executive Vice President - Finance/Chief Financial Officer
	(Principal Accounting Officer)