AMTECH SYSTEMS INC - Annual Report: 2016 (Form 10-K)
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
___________
FORM 10-K
___________
(Mark One) | ||
[X] | ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 | |
For the fiscal year ended: September 30, 2016 | ||
OR | ||
[ ] | TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 | |
For the transition period from ________________ to ________________ | ||
Commission File Number: 0-11412
AMTECH SYSTEMS, INC. | |
(Exact name of registrant as specified in its charter) | |
Arizona | 86-0411215 |
(State or other jurisdiction of incorporation or organization) | (I.R.S. Employer Identification No.) |
131 South Clark Drive, Tempe, Arizona | 85281 |
(Address of principal executive offices) | (Zip Code) |
Registrant’s telephone number, including area code: 480-967-5146 | |
Securities registered pursuant to Section 12(b) of the Act: None | |
Securities registered pursuant to Section 12(g) of the Act: | |
Common Stock, $0.01 Par Value | |
(Title of Class) | |
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes [ ] No [X]
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes [ ] No [X]
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. [X] Yes [ ] No
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). [X] Yes [ ] No
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405) is not contained herein, and will not be contained, to the best of registrant’s knowledge in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [X]
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer [ ] Accelerated filer [X] Non-accelerated filer [ ] (do not check if a smaller reporting company) [ ] Smaller Reporting Company
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes [ ] No [X]
As of March 31, 2016, the aggregate market value of the voting and non-voting stock held by non-affiliates of the registrant was approximately $56,195,833, based upon the closing sales price reported by the NASDAQ Global Market on that date.
As of November 22, 2016, the registrant had outstanding 13,179,535 shares of Common Stock, $0.01 par value.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the Definitive Proxy Statement related to the registrant’s 2016 Annual Meeting of Shareholders, which Proxy Statement will be filed under the Securities Exchange Act of 1934, as amended, within 120 days of the end of the registrant’s fiscal year ended September 30, 2016, are incorporated by reference into Items 10-14 of Part III of this Form 10-K.
AMTECH SYSTEMS, INC. AND SUBSIDIARIES
Table of Contents
Item 4. | Mine Safety Disclosures | ||
2
FORWARD-LOOKING STATEMENTS
Certain information contained or incorporated by reference in this Annual Report on Form 10-K is forward-looking in nature. All statements included or incorporated by reference in this Annual Report on Form 10-K, or made by management of Amtech Systems, Inc. and its subsidiaries (“the Company” or “Amtech”), other than statements of historical fact, are hereby identified as “forward-looking statements” (as such term is defined in Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended). The forward-looking statements in this Annual Report on Form 10-K relate only to events or information as of the date on which the statements are made in this Annual report on Form 10-K. Examples of forward-looking statements include statements regarding Amtech's future financial results, operating results, business strategies, projected costs, products under development, competitive positions and plans and objectives of the Company and its management for future operations. In some cases, forward-looking statements can be identified by terminology such as “may,” “will,” “should,” “would,” “expects,” “plans,” “anticipates,” “intends,” “believes,” “estimates,” “predicts,” “potential,” “continue,” or the negative of these terms or other comparable terminology. Any expectations based on these forward-looking statements are subject to risks and uncertainties and other important factors, including those discussed in the section entitled “ITEM 1A. RISK FACTORS.” These and many other factors could affect Amtech's future operating results and financial condition, and could cause actual results to differ materially from expectations based on forward-looking statements made in this document or elsewhere by Amtech or on its behalf.
You should not place undue reliance on these forward-looking statements. Except as required by law, we undertake no obligation to update or revise publicly any forward-looking statements, whether as a result of new information, future events, changes in assumptions, or otherwise, after the date on which the statements are made or to reflect the occurrence of unanticipated events. You should read this report and the documents that we reference in this report, including documents referenced by incorporation, completely and with the understanding that our actual results may be materially different from what we expect or project.
All references to “we,” “our,” “us,” or “Amtech” refer to Amtech Systems, Inc. and its subsidiaries.
PART I
ITEM 1. BUSINESS
OUR COMPANY
We are a leading, global manufacturer of capital equipment, including thermal processing, silicon wafer handling automation, and related consumables used in fabricating solar cells, LED and semiconductor devices. Semiconductors, or semiconductor chips, are fabricated on silicon wafer substrates, sliced from ingots, and are part of the circuitry, or electronic components, of many products including solar cells, computers, telecommunications devices, automotive products, consumer goods, and industrial automation and control systems. The Company's wafer handling, thermal processing and consumable products currently address the diffusion, oxidation, and deposition steps, including atomic layer deposition used in the fabrication of solar cells, LEDs, semiconductors, microelectromechanical systems (“MEMS”) and the polishing of newly sliced silicon wafers.
Our major emphasis in the solar industry is the development of thermal processes, and deposition for solar cell manufacturing, which we believe, collectively, are key to driving higher cell efficiencies. The markets we serve are experiencing rapid technological advances and are, historically, cyclical. Therefore, future profitability and growth depend on our ability to develop or acquire and market profitable new technology products, and on our ability to adapt to cyclical trends.
We believe our product portfolio, developed through a track record of technological innovation as well as the successful integration of key acquisitions, reduces the cost of solar cell manufacturing by increasing solar cell efficiency, increasing throughput and increasing yields. We have been providing manufacturing solutions to the semiconductor industry for over 30 years and have leveraged our semiconductor technology and industry presence to capitalize on growth opportunities in the solar industry. Our customers use our equipment to manufacture solar cells, semiconductors, silicon wafers and MEMS, which are used in end markets such as solar power, telecommunications, consumer electronics, computers, automotive and mobile hand-held devices. Through the acquisition of BTU International, Inc. ("BTU") in fiscal 2015, we expanded our thermal processing capability with the supply of solder reflow systems used for surface
3
mount and semiconductor packaging applications in the electronics assembly market, and custom equipment for multiple industrial markets. Also in fiscal 2015, we expanded our participation in the solar market through the acquisition of a controlling interest in SoLayTec B.V. ("SoLayTec"), which provides Atomic Layer Deposition ("ALD") systems used in high efficiency solar cells. To complement our research and development efforts, we also sell our equipment to, and coordinate certain development efforts with, research institutes, universities and customers.
For fiscal 2016, we recognized net revenue of $120 million, which included $61 million of solar revenue or approximately 51% of our total revenue. These results compare to $105 million of net revenue for fiscal 2015, which included $57 million of solar revenue or approximately 54% of our total revenue. Our order backlog as of September 30, 2016 and 2015 was $49 million and $35 million, respectively, a 41% increase. Our backlog as of September 30, 2016 included approximately $34 million of orders and deferred revenue from our solar industry customers compared to $23 million from our solar industry customers as of September 30, 2015. Because our orders are typically subject to cancellation or delay by the customer, our backlog at any particular point in time is not necessarily representative of actual sales in subsequent periods, nor is backlog any assurance that we will realize revenue or profit from completing these orders.
Orders from the solar industry totaled $76 million during fiscal 2016, compared to $61 million and $38 million in fiscal 2015 and 2014, respectively. The solar book to bill ratio for fiscal years 2016 and 2015 was 1.2:1 and 1.1:1, respectively.
Following the Company's acquisition of BTU, an evaluation was conducted of the Company's organizational structure. Beginning with the second quarter of fiscal 2015, the Company made changes to its reportable segments. Prior period amounts have been revised to conform to the current period segment reporting structure. The Company operates in three business segments: (i) solar, (ii) semiconductor and (iii) polishing. For information regarding net revenue, operating income and identifiable assets attributable to each of our three business segments for each of the past three fiscal years, see Note 7 of the Notes to Consolidated Financial Statements included herein and "ITEM 7, MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS" in this Annual Report. For information on the products of each segment, see "Solar and Semiconductor Equipment Products" and "Polishing Supplies Products" within this "ITEM 1. BUSINESS" section. For information regarding risks to our business, see “ITEM 1A. RISK FACTORS.”
GROWTH STRATEGY
Capitalize on Growth Opportunities in the Solar Industry by Leveraging Our Diffusion Furnace Market Share, Top-Tier Customer Relationships, and Track Record of Technological Innovation. We believe that long-term growth in the solar industry will be driven by several macro-economic factors, such as volatile energy prices, limited non-renewable energy resources, government incentives for solar generated electricity, increasing environmental awareness, energy security concerns and the expected decrease in the cost of solar energy. As the solar market continues to develop, advances in process technology will be vital to remaining competitive. We intend to continue leveraging our market position, relationships with leading global solar cell customers and demonstrated track record of technical innovation to maximize sales of our current and next-generation technology solutions.
Develop Multi-Product Solutions to Expand Our Addressable Market. We are focused on acquiring, developing and licensing new products across our business in response to customer needs in the solar market. As we add to our product portfolio, we plan to continue expanding our offerings within the solar cell production process, thus capturing a greater percentage of capital spent on building global solar cell manufacturing capacity. Our successful development of PECVD (“Plasma-Enhanced Chemical Vapor Deposition”) equipment is a recent example of meeting our customers' needs and expanding the size of our addressable market.
Pursue Strategic Acquisitions That Complement Our Strong Platform. Over the course of our history, we have developed an acquisition strategy consistent with our focus of maintaining market leadership and a technology roadmap leading to higher efficiency and lower cost solar cells. Based on our acquisition strategy, we continue to evaluate potential technology, product and business acquisitions or joint ventures that are intended to increase our existing market share in the solar, semiconductor and LED industries and expand our addressable market. In evaluating these opportunities, our objectives include: enhancing our earnings and cash flows, adding complementary product offerings, actively expanding our geographic footprint, improving our production efficiency and enhancing our customer base.
Contribute to the Solar Industry's Mission of Reaching Grid Parity. We believe next-generation process technology for solar cell manufacturing is the driver to increasing efficiency and lowering manufacturing costs and is key to enabling
4
grid parity, where the cost of solar generated electricity is on parity with traditional, non-renewable sources of energy such as coal and natural gas. Our next-generation solar cell process technology has a demonstrated track record of increasing our customers' solar cell conversion efficiency. We will continue to develop next-generation solar cell manufacturing process technology that will enable our customers to displace non-renewable energy.
ACQUISITIONS AND DISPOSITIONS
In December 2014, the Company expanded our participation in the solar market by acquiring a 51% controlling interest in SoLayTec, based in Eindhoven, the Netherlands, which provides ALD systems used in high efficiency solar cells. The acquisition of the controlling interest in SoLayTec supports our business model of growth through strategic acquisition.
In January 2015, the Company completed its acquisition of BTU, a Delaware corporation, pursuant to which BTU became a wholly owned subsidiary of the Company. Amtech acquired all of the outstanding stock of BTU in an all-stock transaction. BTU stockholders received 0.3291 shares of Amtech common stock for every share of BTU stock.
The addition of BTU supports our business model of growth through strategic acquisition and continuous innovation. The combination with BTU further positions the Company as a leading, global supplier of solar and semiconductor production and automation systems. The acquisition also further advances our strategy to expand our technology portfolio in adjacent markets and creates a strong platform to drive the growth of our solar business. With the addition of BTU, the Company has a more diversified and profitable revenue base, allowing the Company to better scale production and distribution of our solar technology to meet accelerating demand for next-generation technology solutions.
In September 2015, we sold a portion of our interest in Kingstone Technology Hong Kong Limited (“Kingstone Hong Kong”) that is the parent company of Shanghai Kingstone (collectively with Kingstone Hong Kong, “Kingstone”), a Shanghai-based technology company specializing in ion implant solutions for the solar and semiconductor industries (in which we acquired a 55% ownership in February 2011), to a China-based venture capital firm. Proceeds from the sale of shares were paid to Amtech and used to support the company's core strategic initiatives. We now own 15% of the holding company, Kingstone Hong Kong, following consummation of the transaction, which effectively represents an 8% beneficial ownership interest in the Shanghai operating entity, Shanghai Kingstone.
SOLAR INDUSTRY
We provide process equipment and related cell manufacturing equipment to many of the world's leading solar cell manufacturers.
Within process equipment, our primary focus is on our existing solar diffusion furnace and the development of next-generation diffusion furnaces, including our proprietary N-type, PECVD systems. Our N-type technology has been developed through a three-party research collaboration agreement with the Energy Research Centre of the Netherlands, or ECN, a leading solar research center in Europe and Yingli Green Energy Holding Company Limited, or Yingli, one of the world's leading vertically integrated photovolataic (“PV”) product manufacturers. In 2012, we launched our PECVD system. Through our acquisition of SoLayTec, we produce, develop, and deliver and service worldwide machines for ultrafast ALD Equipment used in high efficiency solar cells.
We also offer furnace automation and wafer handling systems used within the diffusion processing step of solar cell manufacturing. Our automation equipment includes mass wafer transfer systems, sorters, long-boat transfer systems, load station elevators, buffers and conveyers, which we sell both in connection with our diffusion furnaces and on a standalone basis.
Most solar cell manufacturers sell their products to manufacturers of solar modules or solar panels. Others are vertically integrated and use their cells in the production of solar modules and panels. Solar cells are the critical component of solar modules and solar panels, which are sold to the end user and used in residential homes, industrial applications, remote pumping, lighting and heating uses and central power stations.
5
Although the solar market has experienced tremendous growth over the past five years, it is characterized by short-term periods of rapid capacity expansion followed by periods of rapid contraction in our customers' capital spending. When actual and expected end-user demand outstrips available capacity, this triggers the beginning of the next period of expansion.
SEMICONDUCTOR INDUSTRY
We provide diffusion equipment as well as handling, storage and automation equipment and related services to leading semiconductor manufacturers. Our products include horizontal and vertical diffusion furnaces used to produce semiconductors, silicon wafers and MEMS, as well as lapping equipment, polishing templates and wafer insert carriers, mass wafer transfer systems, loaders and sorters.
Although the semiconductor market has experienced significant growth over the past fifteen years, it remains cyclical by nature. The market is characterized by short-term periods of under or over utilization of capacity for most semiconductors, including microprocessors, memory, power management chips and other logic devices. When capacity utilization decreases due to the addition of excess capacity, semiconductor manufacturers typically slow their purchasing of capital equipment. Conversely, when capacity utilization increases, so does capital spending.
Most semiconductor chips are built on a silicon wafer, and include multiple layers of circuitry that connect a variety of circuit components, such as transistors, capacitors and other components. To build a chip, the transistors, capacitors and other components are first created on the surface of the wafer by performing a series of processes to deposit and remove selected film layers, including insulators. Similar processes are then used to build the layers of wiring structures on the wafer. These are all referred to as “front-end” processes.
As demand for increasingly sophisticated electronic devices continues; new technologies such as wireless networks, next generation cellular phones and tablets will help to drive future growth. Electronic equipment continues to become more complex, yet end users are still demanding smaller, lighter and less expensive devices. This, in turn, requires increased performance and reduced cost, size, weight and power requirements of electronic assemblies, printed circuit boards and semiconductors. In response to these developments, manufacturers are increasingly employing more sophisticated production and assembly techniques requiring more advanced manufacturing equipment, such as that supplied by BTU.
In the printed circuit board assembly process, semiconductor discrete-devices and various other components are attached to printed circuit boards. The attachment process, which creates a permanent physical and electrical bond, is called solder reflow or surface mount reflow. Manufacturers rely on high throughput and highly reliable equipment to get the maximum efficiency in their production process. Die level semiconductor packaging processes include precision thermal processing steps. Advancements in the semiconductor industry toward higher chip speeds, smaller form factors and reduced costs are driving the transition to wafer level packaging from the traditional wire bonding technique.
SOLAR AND SEMICONDUCTOR EQUIPMENT PRODUCTS
Our furnace and automation equipment is manufactured in our facilities in The Netherlands, France, Massachusetts, and China. The following paragraphs describe the products that comprise our solar, semiconductor and electronics assembly equipment business:
Horizontal Diffusion Furnaces. Through our subsidiaries, Tempress and Bruce Technologies, we produce and sell horizontal diffusion furnaces. Our horizontal furnaces currently address several steps in the solar and semiconductor manufacturing processes, including diffusion, phosphorus tetrachloride doping, or POCl3, boron tribromide, or BBR3, low-pressure chemical vapor deposition, or LPCVD, oxidation, and annealing.
Our horizontal furnaces generally consist of three large modules: the load station where the loading of the wafers occurs; the furnace section, which is comprised of one to five thermal reactor chambers; and the gas distribution cabinet where the flow of gases into the reactor chambers is controlled, and often customized to meet the requirements of our customers' particular processes. The horizontal furnaces utilize a combination of existing industry and proprietary technologies and are sold primarily to solar customers and semiconductor customers who do not require the advanced automation of, or cannot justify the higher expense of, vertical furnaces for some or all of their diffusion processes. Our models are capable of processing all currently existing wafer sizes.
6
Automation Products - Solar & Semiconductor. Our automation technology products are used in several of the diffusion steps and in the anneal processing step of solar cell manufacturing. Our R2D Automation equipment includes mass wafer transfer systems, sorters, long-boat transfer systems, load station elevators, buffers and conveyers. We use a vacuum technology in our Comet Standalone and our Comet Full Automation solar wafer transfer systems designed to ensure high throughput, reduced breakage and thereby increased yield.
Chemical Vapor Deposition (CVD). We have two applications in the solar device technology. Our solar PECVD product applies an anti-reflective coating to solar wafers; a coating critical to the efficiency of solar cells. PECVD layers are also used for passivation of the front and/or back side of the solar cell. We also offer the combination of tunnel oxide with a LPCVD of poly-layer, this is a new application in our solar roadmap towards efficiencies above 21%. These solar products add two solar cells processing step to Amtech's offerings. We are exploring next-generation high-efficiency technology and dedicating our efforts to that process development.
Atomic Layer Deposition. We produce, develop, deliver and service worldwide machines for ultrafast, spatial (ALD)equipment, a promising technology for ultrathin Al2O3 passivation layers on solar cells. The ALD machines from SoLayTec are intended for industrial production in the solar market. As such, following the acquisition of the majority interest in SoLayTec, the Company is now able to use ALD in the industrial production and solar market due to technology that was previously unavailable to the Company prior to the acquisition due to the very low speed of ALD and the associated high cost. The unique feature of the SoLayTec machines is the breakthrough speed that enables industrial application.
Automation Products - Semiconductor. Use of our automation products reduces human handling and, therefore, reduces exposure of wafers to particle sources during the loading and unloading of the process tubes and protects operators from heat and chemical fumes. The top reactor chamber of a horizontal furnace can be as much as eight feet from the floor on which the operator stands when manually loading wafer boats. Typical boats of 150mm to 300mm wafers weigh three to six pounds. Given these two factors, automating the wafer loading and unloading of a diffusion furnace improves employee safety and ergonomics in silicon wafer, solar cell and semiconductor manufacturing facilities.
S-300. Our patented S-300 model provides a very efficient method of automatically transporting a full batch of up to 300 wafers to the designated tube level and automatically placing them directly onto the cantilever loader of a diffusion furnace at one time. This product is suitable for the production of nearly all semiconductors manufactured using a horizontal furnace. The S-300 can be used in conjunction with all current wafer sizes and is particularly well suited for manufacturers of 300mm wafers.
Comet. Our Comet and Gemini series of wafer transfer systems include a wide range of throughputs and footprints to meet the needs of our customers who serve the semiconductor industry. Comet Sorter with Optical Character Recognition (OCR) is used in sorting, randomizing, compacting or tracking. The Comet Sorter is cassette to cassette with OCR front and back scribe functions, notch alignment and SECSII Gem communication. Comet ID Readers check tag carriers then read each wafer scribe. The Comet ID Reader sends the information to the host with SECSII Gem commands.
Small Batch Vertical Furnace. Our small batch, two-tube vertical furnace was developed internally with the active support from a large semiconductor manufacturer and long-term customer. The specifications for this furnace include a two-tube vertical furnace for wafer sizes of up to 200mm, with each tube having a small flat zone capable of processing 25-50 wafers per run. We are targeting niche applications, including research and development, while we continue to develop additional processes, since the competition in the large batch vertical furnace market is intense and our competitors are much larger and have substantially greater financial resources, processing knowledge and advanced technology.
Continuous Thermal Processing Systems. Through our BTU subsidiary, we produce and sell thermal processing systems used in the solder reflow and curing stages of printed circuit board assembly as well as systems for the thermal processes used in advanced semiconductor packaging. Our printed circuit board assembly products are used primarily in the advanced, high-density segments of the market that utilize surface mount technology.
Flip-chip reflow provides the physical and electronic bond of the semiconductor device to its package. Our range of convection reflow systems, utilizing patented closed loop convection technology, rated at up to 400°C and operate in air or nitrogen atmospheres. These products utilize forced impingement convection technology to transfer heat to the substrate. Using thermal power arrays of up to five-kilowatts, they can process substrates in dual lane, dual speed
7
configurations, thereby enabling our customers to double production without increasing the machine’s footprint. These products are available in four models based on the heated lengths of thermal processing chambers. Heated length is based on the required production rate and loading requirements.
POLISHING SUPPLIES PRODUCTS
Our polishing supplies division provides solutions to the lapping and polishing marketplace. Lapping is the process of abrading components with a high degree of precision for flatness, parallelism and surface finish. Common applications for this technology are silicon wafers for semiconductor products, sapphire substrates for LED lighting and mobile devices, silicon carbide wafers for LED and power device applications, various glass and silica components for 3D image transmission, quartz and ceramic components for telecommunications devices, medical device components and computer hard disks. We manufacture the products described below in Pennsylvania and sell them under our PR Hoffman brand name.
Wafer Carriers. Carriers are work holders into which silicon and sapphire wafers or other materials are inserted for the purpose of holding them securely in place during the lapping and polishing processes. We produce carriers for our line of lapping and polishing machines, as well as for those machines sold by our competitors. Substantially all of the carriers we produce are customized for specific applications. Insert carriers, our most significant category of carriers, contain plastic inserts molded onto the inside edge of the work-holes of the carrier, which hold the wafers in place during processing. Although our standard steel carriers are preferred in many applications because of their durability, rigidity and precise dimensions, they are typically not suited for applications involving softer materials or when metal contamination is an issue. Insert carriers, however, are well suited for processing large semiconductor wafers, up to 450mm in diameter, and other fragile materials or where contamination is an issue, because they provide the advantages of steel carriers while reducing the potential for damage to the edges of such sensitive materials. Our insert carriers are used for double-sided lapping or polishing of wafers up to 450mm in diameter.
Semiconductor Polishing Templates. Our polishing templates are used to securely hold sapphire or other wafer materials in place during single-sided polishing processes. Polishing templates are customized for specific applications and are manufactured to exacting tolerances. We manufacture polishing templates for most brands of tools and various processes. In addition to silicon wafers, these products are used in polishing silicon carbide wafers and sapphire crystals used in LEDs, power devices as well as mobile communication applications.
Double-Sided Planetary Lapping and Polishing Machines. Double-sided lapping and polishing machines are designed to process thin and fragile materials, such as semiconductor, sapphire and other wafer-like materials, precision optics, computer disk media and ceramic components for wireless communication devices, to exact tolerances of thickness, flatness, parallelism and surface finish. On average, we believe that we offer our surface processing systems with a lower cost of ownership than systems offered by our competitors. We target the LED, mobile device, semiconductor, optics, quartz, ceramics, medical, computer disk and metal working markets.
MANUFACTURING, RAW MATERIALS AND SUPPLIES
Our solar, semiconductor and electronics assembly equipment manufacturing activities consist primarily of engineering design to meet specific and evolving customer needs, and procurement and assembly of various commercial and proprietary components into finished thermal processing systems and related automation in Vaassen, The Netherlands, Clapiers, France, North Billerica, Massachusetts, and Shanghai, China.
Our manufacturing activities in the polishing supplies and equipment business include laser-cutting and other fabrication steps in producing lapping and polishing consumables, including carriers, templates, gears, wear items and spare parts in Carlisle, Pennsylvania, from raw materials manufactured to our specifications by our suppliers. These products are engineered and designed for specific applications and to meet the increasingly tight tolerances required by our customers. Many items, such as proprietary components for our solar and semiconductor equipment and lapping plates, are also purchased from suppliers who manufacture these items to our specifications.
Final assembly and tests of our equipment and machines are performed within our manufacturing facilities. Quality control is maintained through inspection of incoming materials and components, in-process inspection during equipment
8
assembly, testing of assemblies and final inspection and, when practical, operation of manufactured equipment prior to shipment.
Since much of our polishing supplies know-how relates to the manufacture of its products, this business' facility is equipped to perform a significantly higher percentage of the fabrication steps required in the production of its products. However, injection molding for our insert carriers and the manufacture of raw cast iron plates are subcontracted out to various third parties. Our polishing supplies business relies on key suppliers for certain materials, including two steel mills in Germany and Japan, an injection molder, a single-sourced pad supplier from Japan and an adhesive manufacturer. To minimize the risk of production and service interruptions and/or shortages of key parts, we maintain appropriate inventories of key raw materials and parts. If for any reason we were unable to obtain a sufficient quantity of parts in a timely and cost-effective manner to meet our production requirements, our results of operations would be materially and adversely affected.
RESEARCH, DEVELOPMENT AND ENGINEERING
The markets we serve are characterized by evolving industry standards and rapid technological change. To compete effectively in our markets, we must continually maintain or exceed the pace of such change by improving our products and our process technologies and by developing new technologies and products that compete effectively on the basis of price and performance. To assure that these technologies and products address current and future customer requirements, we obtain as much customer cooperation and input as possible, thus increasing the efficiency and effectiveness of our research and development efforts. In addition, we look for strategic acquisitions, such as the acquisition of SoLayTec, which will provide us with new technologies to compete effectively in the markets in which we operate.
From time to time we add functionality to our products or develop new products during engineering and manufacturing to fulfill specifications in a customer's order, in which case the cost of development, along with other costs of the order, are charged to cost of sales. We periodically receive research grants for research and development of products, which are netted against our research, development and engineering costs. Our expenditures (net of grants earned) that have been accounted for as research and development were $8.0 million (7% of net revenue) for fiscal 2016, $6.9 million (7% of net revenue) for fiscal 2015, and $6.3 million (11% of net revenue) for fiscal 2014.
9
PATENTS
The following table shows our material patents, the patents licensed by us, and the expiration date of each patent and license:
Product | Countries | Expiration Date or Pending Approval | ||
Multiple methods for manufacturing a solar cell and related equipment | Various | Various | ||
Method for manufacturing a solar cell; N-type cells with reverse flow and metal wrap-through | Netherlands | 2032 | ||
Method for manufacturing a solar cell; N-type cells with reverse flow and metal wrap-through | United States | 2033 | ||
Wafer boat and use thereof | Netherlands | 2034 | ||
Wafer boat loader assembly, furnace system, use thereof and method for operating said assembly | Netherlands | 2035 | ||
IBAL (Individual Boats with Automated Loading) Model S-300 | United States | Various | ||
Systems and methods for charging solar cell layers | Various | Various | ||
Gas-bearing-based Atomic Layer Deposition (ALD) | Europe | 2028 | ||
Carrier-less gas bearing ALD | Europe | 2029 | ||
Reciprocal and helical-scan multi-nozzle ALD configurations | Europe | 2030 | ||
Ultrafast gas bearing-based reactive ion etching | Europe | 2030 | ||
Contactless ALD patterning process | Europe | 2030 | ||
Maskless patterned fast ALD | Europe | 2030 | ||
Modular furnace system | United States | 2021 | ||
Convection furnace thermal profile enhancement | United States | 2023 | ||
Lapping machine adjustable mechanism | United States | 2027 | ||
To the best of our knowledge, there are currently no pending lawsuits against us regarding infringement of any existing patents or other intellectual property rights or any material unresolved claims made by third parties that we are infringing the intellectual property rights of such third parties.
SALES AND MARKETING
Due to the highly technical nature of our products, we market our products primarily by direct customer contact through our sales personnel and through a network of domestic and international independent sales representatives and distributors that specialize in solar and semiconductor equipment and supplies. Our promotional activities include direct sales contacts, participation in trade shows, an internet website, advertising in trade magazines and the distribution of product brochures.
Through the acquisition of BTU, we have expanded our global sales and support infrastructure contributing to our competitive position.
Sales to distributors are generally on terms comparable to sales to end user customers, as our distributors generally quote their customers after first obtaining a quote from us and have an order from the end-user before placing an order with us. Our sales to distributors are not contingent on their future sales and do not include a general right of return. Historically, returns have been rare. Distributors of our solar and semiconductor equipment do not stock a significant amount of our products, as the inventory they do hold is primarily limited to parts needed to provide timely repairs to the customer.
10
Payment terms of our parts, service and retrofit sales are generally net 30 days. The payment terms of equipment or systems sales vary depending on the size of the order and the size, reputation and creditworthiness of the customer. As a result, the financial terms of equipment sales can range from 80% due 30 days after shipment and 20% due 30 days after acceptance, to requiring a customer deposit 30 days after order placement, a portion due 30 days after shipment and the balance due 30 days after acceptance. Letters of credit are required of certain customers depending on the size of the order, creditworthiness of the customer and the customer's country of domicile.
During fiscal 2016, 80% of our net revenue came from customers outside of North America. This group represented 74% of revenues in fiscal 2015. In fiscal 2016, net revenue was distributed among customers in different geographic regions as follows: North/South America 20% (17% of which is in the United States), Asia 68% (including 28% to China 18% to Malaysia and 15% to Taiwan) and Europe 12%. In fiscal 2016, one customer individually accounted for 11% of net revenue. In fiscal 2015, two customers individually accounted for 15% and 11% of net revenue, respectively. In fiscal 2014, two customers individually accounted for 18% and 11% of net revenue, respectively. Our business is not seasonal in nature, but is cyclical based on the capital equipment investment patterns of solar cell and semiconductor manufacturers. These expenditure patterns are based on many factors, including capacity utilization, anticipated demand, the development of new technologies and global and regional economic conditions. See "Part 1 Financial Information, Item 1. Consolidated Financial Statements, Footnote 8 Geographic Regions" for information regarding our net long-lived assets.
COMPETITION
We compete in several distinct equipment markets for solar cells, semiconductor devices, semiconductor wafers, MEMS, electronics assembly, and the market for lapping and polishing machines and supplies used in the LED, mobile devices and semiconductor markets. Each of these markets is highly competitive. Our ability to compete depends on our ability to continually improve our products, processes and services, as well as our ability to develop new products that meet constantly evolving customer requirements. Significant competitive factors for succeeding in these markets include the product's technical capability, productivity and cost-effectiveness, overall reliability, ease of use and maintenance, contamination and defect control and the level of technical service and support.
The Solar Cell, Semiconductor Device, and MEMS Markets. Our thermal processing equipment and automation primarily compete with those produced by other original equipment manufacturers, some of which are well-established firms that are much larger and have substantially greater financial resources than we have. Some of our competitors have a diversified product line, making it difficult to quantify their sales of products that compete directly with our products. Competitors of our horizontal diffusion furnaces include Centrotherm GmbH, Koyo Systems Co. Ltd., Sandvik Thermal Process, Inc., a subsidiary of Sandvik AB, 48th Institute, Sevenstar Electronics, CVD Equipment, Inc., Semco Engineering S.A., S.C New Energy, Meyer Burger, Ltd. and Expertech, Inc. We are experiencing increased competition from local Chinese equipment manufacturers, including 48th Institute, S.C New Energy and Sevenstar Electronics, which may receive varying levels of financial support from the Chinese government. Our primary competitive advantages over such local manufacturers include our automation and higher-efficiency solar cell production technologies which we develop in collaboration with customers and research institutes. Also, our furnaces and lapping and polishing machines face, to a limited extent, competition from equipment on the low-end of the price spectrum.
Our principal competitors for printed circuit board assembly equipment and advanced semiconductor packaging vary by product application. The principal competitors for solder reflow systems are Vitronics-Soltec, Heller, Folungwin, ERSA, and Rehm. The principal competitors for advanced semiconductor packaging are Vitronics-Soltec and Heller. Our in-line, controlled atmosphere furnaces compete primarily against products offered by Centrotherm, and SierraTherm/Schmid Thermal Systems. We also face competition from emerging low cost Asian manufacturers and other established European manufacturers.
Although price is a factor in buying decisions, we believe that technological leadership, process capability, throughput, environmental safeguards, uptime, mean time-to-repair, cost of ownership and after-sale support have become increasingly important factors. We compete primarily on the basis of these criteria, rather than on the basis of price alone.
11
General Industrial Lapping and Polishing Machines, Supplies and Semiconductor Wafer Markets. We experience price competition for wafer carriers produced by foreign manufacturers for which there is very little publicly available information. As a result, we are intensifying our efforts to reduce the cost of our carriers and will continue to compete with other manufacturers of carriers by continuing to update our product line to keep pace with the rapid changes in our customers' requirements and by providing a high level of quality and customer service. We produce steel carriers, including insert carriers, on an advanced laser-cutting tool, which reduces our costs and lead times and increases our control over quality. Competitors of our lapping and polishing machines and supplies include Lapmaster Wolters, Speedfam Co. Ltd., Lapmaster International, LLC, Hamai Co., Ltd., Onse, Inc. and Eminess Technologies, Inc. Our strategy to enhance our sales of wafer carriers includes developing additional niche markets for templates and providing a high level of customer support and products at a lower cost than our competitors.
EMPLOYEES
As of September 30, 2016, we employed 470 people. Of these employees, 14 were based at our corporate offices in Tempe, Arizona, 30 at our manufacturing plant in Carlisle, Pennsylvania, 82 at our manufacturing plants in N. Billerica, Massachusetts, 132 at our combined facilities in The Netherlands, 150 at our facilities in China, 14 at other Asia-Pacific offices, 42 at our facilities in France, and 6 at our office in the U.K . Of the 30 people employed at our Carlisle, Pennsylvania facility, 21 were represented by the United Auto Workers Union - Local 1443. We have never experienced a work stoppage or strike, and other than employees at the Carlisle facility, no other employees are represented by a union. We consider our employee relations to be good.
ENVIRONMENTAL
EPA Accrual - As a result of the acquisition of BTU, the Company assumed BTU’s proportional responsibility for clean-up costs at a Superfund site. As an equipment manufacturer, BTU generated and disposed of small quantities of solid waste that were considered hazardous under Environment Protection Agency (“EPA”) regulations. Because BTU historically used a waste disposal firm that disposed of the solid waste at a site that the EPA designated as a Superfund site, BTU was named by the EPA as one of the entities responsible for a portion of the expected clean-up costs. Based on the Company's proportional responsibility, as negotiated with and agreed to by the EPA, the Company's liability related to this matter is less than $0.2 million. As of September 30, 2016, the remaining liability is $0.2 million, which is included in Other Accrued Liabilities on the Consolidated Balance Sheet as of September 30, 2016. In 2009, in accordance with the settlement agreement with the EPA, BTU established a letter of credit for $0.2 million for the benefit of the EPA to secure potential cash payments as part of BTU's settlement of their proportional liability.
CORPORATE INFORMATION
We were incorporated in Arizona in October 1981, under the name Quartz Engineering & Materials, Inc. We changed to our present name in 1987. We conduct operations through five wholly-owned subsidiaries: Tempress Systems, Inc., or Tempress, a Texas corporation with all of its operations in Vaassen, The Netherlands, acquired in 1994 and subsequently reincorporated in The Netherlands; P.R. Hoffman Machine Products, Inc., or P.R. Hoffman, an Arizona corporation based in Carlisle, Pennsylvania, acquired in July 1997; Bruce Technologies, Inc., or Bruce Technologies, a Massachusetts corporation based in North Billerica, Massachusetts, acquired in July 2004; R2D Automation SAS, or R2D, a French corporation located near Montpellier, France, acquired in October 2007; BTU International, Inc., a Delaware corporation based in North Billerica, Massachusetts, acquired in January 2015. In addition, we acquired a majority ownership of SoLayTec, a private company based in Eindhoven, the Netherlands. We also own a 15% interest in Kingstone Hong Kong, which effectively represents an 8% beneficial ownership interest in the Shanghai operating entity, Shanghai Kingstone.
AVAILABLE INFORMATION
Our internet website address is www.amtechsystems.com. Through our website, we make available, without charge, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and any amendments to those reports, as soon as reasonably practicable after such materials are electronically filed, or furnished to, the Securities and Exchange Commission, or the SEC. The information found on our website, or information that may be accessed through links on our website, are not part of this or any other report we file with, or furnish to, the SEC. In addition, our SEC filings are available at the SEC's website at http://www.sec.gov.
12
ITEM 1A. RISK FACTORS
Our business faces significant risks. Because of the following factors, as well as other variables affecting our operating results and financial condition, past performance may not be a reliable indicator of future performance, and historical trends should not be used to anticipate results or trends in future periods. The following risk factors should be read in conjunction with the other information and risks set forth herein.
Risks Related to our Business and Industry.
The ongoing volatility of the solar and semiconductor equipment industry may negatively impact our business and results of operations and our corresponding ability to efficiently budget our expenses. The demand for our products and the profitability of our products can change significantly from period to period as a result of numerous factors.
The solar and semiconductor equipment industries are highly cyclical and the conditions of the industries we operate are volatile. As such, demand for, and the profitability of, our products can change significantly from period to period as a result of numerous factors, including, but not limited to:
• changes in global and regional economic conditions;
• changes in capacity utilization and production volume of manufacturers of solar cells, semiconductors, silicon
wafers and MEMS;
• | the profitability and capital resources of those manufacturers; |
• | tariff and international trade barriers, including without limitation unfair trade proceedings against solar PV manufacturers in China; |
• | challenges associated with marketing and selling manufacturing equipment and services to a diverse and diffuse customer base; |
• | the financial condition of solar PV customers and their access to affordable financing and capital; and |
• the shift of solar and semiconductor production to Asia, where there often is increased price competition.
For these and other reasons, our results of operations for past periods may not necessarily be indicative of future operating results.
Since our business has historically been subject to cyclical industry conditions, we have experienced significant fluctuations in our quarterly new orders and net revenue, both within and across years. Demand for solar, semiconductor and silicon wafer manufacturing equipment and related consumable products has also been volatile as a result of sudden changes in solar and semiconductor supply and demand and other factors in both semiconductor devices and wafer fabrication processes. Our orders tend to be more volatile than our revenue, as any change in demand is reflected immediately in orders booked, which are net of cancellations, while revenue tends to be recognized over multiple quarters as a result of procurement and production lead times and the deferral of certain revenue under our revenue recognition policies. Customer delivery schedules on large system orders can also add to this volatility since we generally recognize revenue for new product sales on the date of customer acceptance or the date the contractual customer acceptance provisions lapse. As a result, the fiscal period in which we are able to recognize new product revenue is typically subject to the length of time that our customers require to evaluate the performance of our equipment after shipment and installation, which could cause our quarterly operating results to fluctuate.
The purchasing decisions of our customers are highly dependent on their capacity utilization, which changes when new facilities are put into production, and with the level of demand for solar cells and semiconductors. Purchasing decisions are also impacted by changes in the economies of the countries which our customers serve, as well as the state of the worldwide solar and semiconductor industries. The timing, length and severity of the up-and-down cycles in the solar and semiconductor equipment industries are difficult to predict. The cyclical nature of our marketplace affects our ability to accurately budget our expense levels, which are based in part on our projections of future revenue.
When cyclical fluctuations result in lower than expected revenue levels, operating results are adversely affected. Cost reduction measures may be necessary in order for us to remain competitive and financially sound. During a down cycle, our operating results may be adversely affected if we are unable to make timely adjustments to our cost and expense structure to correspond to the prevailing market conditions; effectively manage the supply chain; and motivate and retain key employees. In addition, during periods of rapid growth, our operating results may be adversely affected if we are unable to increase manufacturing capacity and personnel to meet customer demand, which may require additional
13
liquidity. We can provide no assurance that we can timely and effectively respond to the industry cycles. Our failure to timely and effectively respond to these cyclical changes could have a material adverse effect on our business.
The Company is exposed to risks as a result of ongoing changes specific to the solar industry.
A significant portion of the Company's business is to supply the solar market, which, in addition to the general industry changes described above, is characterized by ongoing changes specific to the solar industry, including:
• | the varying energy policies of governments around the world and their influence on the rate of growth of the solar PV market, including the availability and amount of government incentives for solar power such as tax credits, feed-in tariffs, rebates, renewable portfolio standards that require electricity providers to sell a targeted amount of energy from renewable sources, and goals for solar installations on government facilities; |
• | the need to continually decrease the cost-per-watt of electricity produced by solar PV products to or below competing sources of energy by, among other things, reducing operating costs and increasing throughputs for solar PV manufacturing, and improving the conversion efficiency of solar PV; |
• | the impact on demand for solar PV products arising from the cost of electricity generated by solar PV compared to the cost of electricity from the existing grid or other energy sources; |
• | the growing number of solar PV manufacturers and increasing global production capacity for solar PV, primarily in China as a result of increased solar subsidies and lower manufacturing costs; |
• | tariff and international trade barriers, including without limitation such barriers arising from any trade tensions between the United States and China and potential retaliatory actions; |
• | the varying levels of operating and industry experience among solar PV manufacturers and the resulting differences in the nature and extent of customer support services requested from the Company; |
• | challenges associated with marketing and selling manufacturing equipment and services to a diverse and diffuse customer base; |
• | the cost of polysilicon and other materials; |
• | access to affordable financing and capital by customers and end-users; and |
• | an increasing number of local equipment and parts suppliers based in Asia with certain cost and other advantages over suppliers from outside Asia. |
In addition, current projections for global solar PV production exceed anticipated near-term end-use demand, which is heavily dependent on installed cost-per-watt, government policies and incentives, and the availability of affordable capital. An oversupply of solar PV may lead customers to delay or reduce investments in manufacturing capacity and new technology, and adversely impact the sales and/or profitability of our products. If the Company does not successfully manage the risks resulting from the ongoing changes occurring in the solar industry, its business, financial condition and results of operations could be materially and adversely affected.
The solar and semiconductor equipment industries are competitive and because we are relatively small in size and have fewer resources compared to our competitors, we may not be able to compete successfully with them. Loss of competitive position could impair our prices, customer orders, revenue, gross margin and market share, any of which would negatively affect our financial position and results of operations.
Our industry includes large manufacturers with substantial resources to support customers worldwide. Our future performance depends, in part, upon our ability to continue to compete successfully in these markets. Some of our competitors are diversified companies having substantially greater financial resources and more extensive research, engineering, manufacturing, marketing and customer service and support capabilities than we can provide. We face competition from companies whose strategy is to provide a broad array of products, some of which compete with the products and services that we offer. These competitors may bundle their products in a manner that may discourage customers from purchasing our products. In addition, we face competition from emerging solar and semiconductor equipment companies whose strategy is to provide a portion of the products and services that we offer often at a lower price than ours and use innovative technology to sell products into specialized markets. Furthermore, we face competition from Chinese equipment manufacturers, including 48th Institute and Sevenstar Electronics, which may receive greater support from Chinese customers and governmental agencies because they are locally based. Loss of competitive position could impair our prices, customer orders, revenue, gross margin and market share, any of which would negatively affect our financial position and results of operations. Our failure to compete successfully with these other companies would seriously harm our business. There is a risk that larger, better-financed competitors will develop and market more advanced products than those that we currently offer, or that competitors with greater financial resources may decrease
14
prices thereby putting us under financial pressure. The occurrence of any of these events could have a negative impact on our revenue and results of operations.
Our reliance on sales to a few major customers and granting credit to those customers places us at financial risk.
We currently sell to a relatively small number of customers, and we expect our operating results will likely continue to depend on sales to a relatively small number of customers for the foreseeable future. Our operating results, therefore, depend on the ability of these customers to sell products that require our equipment in their manufacture. Many of our customer relationships have been developed over a short period of time and certain customers are in their early stages of development. The loss of sales to any of these customers would have a significant negative impact on our business. Our agreements with these customers may be canceled if we fail to meet certain product specifications, materially breach the agreement, or in the event of bankruptcy, and our customers may seek to renegotiate the terms of current agreements or renewals. We cannot be certain that these customers will generate significant revenue for us in the future nor that these customer relationships will continue to develop. If our relationships with other customers do not continue to develop, we may not be able to expand our customer base or maintain or increase our revenue.
As of September 30, 2016, one customer individually represented 11% of accounts receivable. As of September 30, 2015, no single customer represented greater than 10% of accounts receivable. A significant change in the liquidity or financial position of any of our customers that purchase large systems could have a material impact on the collectability of our accounts receivable and our future operating results. A concentration of our receivables from one or a small number of customers places us at risk. We attempt to manage this credit risk by performing credit checks, by requiring significant partial payments prior to shipment where appropriate and by actively monitoring collections. We also require letters of credit from certain customers depending on the size of the order, type of customer or its creditworthiness and its country of domicile. Our major customers may seek, and on occasion, may receive pricing, payment, intellectual property-related, or other commercial terms that are less favorable to the Company. If any one or more of our major customers does not pay us or continue business with us, it could adversely affect our financial position and results of operations.
If any of our customers cancels or fails to accept a large system order, our financial position and results of
operations could be materially and adversely affected.
Our backlog includes orders for large systems, such as our diffusion furnaces, with system prices of up to and in excess of $1.0 million, depending on the system configuration, options and any special requirements of the customer. Because our orders are typically subject to cancellation or delay by the customer, our backlog at any particular point in time is not necessarily representative of actual sales for succeeding periods, nor is backlog any assurance that we will realize revenue or profit from completing these orders. Our financial position and results of operations could be materially and adversely affected should any large systems order be canceled prior to shipment, or not be accepted by the customer. Cancellations may result in inventory that we may not be able to sell or reuse if those products have been tailored for a specific customer's requirements and cannot then be sold without significant incremental cost. We have experienced cancellations in the past. We cannot provide any assurance that we will realize revenue or profit from our backlog or for which period net revenue will be recognized, if ever.
Because we depend on revenue from international customers, our business may be adversely affected by changes in the economies and policies of the countries or regions in which we do business.
During fiscal 2015, 74% of our net revenue came from customers outside of North America. During fiscal 2016, 80% of our net revenue came from customers outside of North America as follows:
• | Asia - 68% (including China - 28%, Malaysia 18% and Taiwan - 15%); and |
• | Europe – 12% |
Each region in the global solar and semiconductor equipment markets exhibits unique characteristics that can cause capital equipment investment patterns to vary significantly from period to period. Our business and results of operations could be negatively affected by periodic local or international economic downturns, trade balance issues and political, social and military instability in countries such as China, India, South Korea, Taiwan and possibly elsewhere. In addition, we face competition from a number of suppliers based in Asia that have certain advantages over suppliers from outside of Asia. These advantages include lower operating, shipping and regulatory costs, proximity to customers,
15
favorable tariffs and other government policies that favor local suppliers. Additionally, the marketing and sale of our products to international markets expose us to a number of risks, including, but not limited, to:
• | increased costs associated with maintaining the ability to understand the local markets and follow their trends and customs, as well as develop and maintain effective marketing and distributing presence in various countries; |
• | the availability of advance payments made by our customers; |
• | difficulty in providing customer service and support in these markets; |
• | difficulty in staffing and managing overseas operations; |
• | longer sales cycles and time collection periods; |
• | fewer or weaker legal protections for our intellectual property rights; |
• | failure to develop appropriate risk management and internal control structures tailored to overseas |
operations;
• | difficulty and costs relating to compliance with the different or changing commercial and legal requirements of our overseas markets; |
• | fluctuations in foreign currency exchange and interest rates, particularly in Asia and Europe; |
• | longer sales cycles and time collection periods; |
• | failure to obtain or maintain certifications for our products or services in these markets; and |
• | international trade barriers such as export requirements, tariffs, taxes and other restrictions and expenses. |
Our common stock may experience substantial price volatility.
Our stock price has experienced volatility in the past, and volatility in the price of our common stock may occur in the future, particularly as a result of fluctuations in global economic conditions and quarter-to-quarter variations in our actual or anticipated financial results, or the financial results of other semiconductor companies or our customers. Stock price volatility may also result from product announcements by us or our competitors, or from changes in perceptions about the various types of products we manufacture and sell. In addition, our stock price may fluctuate due to price and volume fluctuations in the stock market, especially in the technology sector, and as a result of other considerations or events described in this section.
Our business may be adversely affected by significant exchange rate fluctuations and changes in foreign laws
We incurred a net foreign currency transaction loss of less than $0.1 million during the fiscal year ended September 30, 2016 and had a foreign currency transaction gain of $0.3 million for the fiscal year ended September 30, 2015. While our business generally has not been materially affected in the past by currency fluctuations, there is a risk that it may be materially adversely affected in the future, especially as we continue to expand operations into other countries. Such risk includes possible losses due to currency exchange rate fluctuations, possible future prohibitions against repatriation of earnings, or proceeds from disposition of investments. Our wholly-owned subsidiary, Tempress Systems, has conducted its operations in The Netherlands since 1995. In October 2007, we completed our acquisition of R2D, a French company. In December 2014, we acquired SoLayTec with operations in The Netherlands. BTU International, acquired in January 2015, has substantial operations in Shanghai, China. As a result of these acquisitions in Europe and Asia, the risk associated with foreign currency translation gains and losses has increased. Operations of these companies are subject to the taxation policies, employment and labor laws, transportation regulations, import and export regulations and tariffs, possible foreign exchange restrictions and international monetary fluctuations. Changes in such laws and regulations may have a material adverse effect on our revenue and costs. We are subject to the Foreign Corrupt Practices Act, which may place us at a competitive disadvantage to foreign companies that are not subject to similar regulations. We could be adversely affected by violations of applicable anti-corruption laws or violations of our internal policies designed to ensure ethical business practices.
We are exposed to risks associated with an uncertain global economy.
Uncertain global economic conditions and slowing growth in China, Europe and the United States, along with difficulties in the financial markets, national debt concerns in various regions and government austerity measures, pose challenges to the industries in which we operate. Economic uncertainty and related factors, including unemployment, inflation and fuel prices, exacerbate negative trends in business and consumer spending and may cause our customers to push out, cancel, or refrain from placing orders for equipment or services. This may, in turn, reduce our net sales, reduce backlog, and affect our ability to convert backlog to sales. Uncertain market conditions, difficulties in obtaining capital, or reduced profitability may also cause some customers to scale back operations, exit businesses, merge with other
16
manufacturers, or file for bankruptcy protection and potentially cease operations, which can also result in lower sales and/or additional inventory or bad debt expense for us. These conditions may similarly affect key suppliers, impairing their ability to deliver parts and potentially causing delays or added costs for delivery of our products. In addition, these conditions may lead to strategic alliances by, or consolidation of, other equipment manufacturers, which could adversely affect our ability to compete effectively. Uncertainty about future economic and industry conditions also makes it more challenging for us to forecast our operating results, make business decisions, and identify and prioritize the risks that may affect our businesses, sources and uses of cash, financial condition and results of operations. We may be required to implement additional cost reduction efforts, including restructuring activities, and/or modify our business model, which may adversely affect our ability to capitalize on opportunities in a market recovery. If we do not timely and appropriately adapt to changes resulting from the uncertain macroeconomic environment and industry conditions, or to difficulties in the financial markets, our business, financial condition and results of operations may be materially and adversely affected.
Manufacturing interruptions or delays could affect our ability to meet customer demand and lead to higher costs, while the failure to estimate customer demand accurately could result in excess or obsolete inventory.
Our business depends on timely supply of equipment, services and related products that meet the rapidly changing technical and volume requirements of our customers. Some key parts to our products are subject to long lead-times and/or obtainable only from a single supplier or limited group of suppliers. Cyclical industry conditions and the volatility of demand for manufacturing equipment increase capital, technical, operational and other risks for us and for companies throughout our supply chain. Further, these conditions may cause some suppliers to scale back operations, exit businesses, merge with other companies, or file for bankruptcy protection and possibly cease operations. We may also experience significant interruptions of our manufacturing operations, delays in our ability to deliver products or services, increased costs or customer order cancellations as a result of:
• | the failure or inability of suppliers to timely deliver sufficient quantities of quality parts on a cost-effective basis; |
• | volatility in the availability and cost of materials, including rare earth elements; |
• | difficulties or delays in obtaining required import or export approvals; |
• | information technology or infrastructure failures; and |
• | natural disasters or other events beyond our control (such as earthquakes, floods or storms, regional economic downturns, pandemics, social unrest, political instability, terrorism, or acts of war), particularly where the Company conducts manufacturing. |
Natural disasters, outbursts of infectious diseases, terrorist attacks and threats or actual war may negatively impact all aspects of our operations, revenue, costs and stock price.
Natural disasters such as earthquakes, floods, severe weather conditions or other catastrophic events, or outbreaks of infectious diseases may severely affect our operations or those of our suppliers and customers. Such catastrophic events or future disasters may have a material adverse effect on our business.
Acts of terrorism, as well as events occurring in response or connection to them, including potential future terrorist attacks, rumors or threats of war, actual military conflicts or trade disruptions impacting our domestic or foreign customers or suppliers of parts, components and subassemblies, may negatively impact our operations by causing, among other things, delays or losses in the delivery of supplies or finished goods and decreased sales of our products. More generally, any of these events could cause consumer confidence and spending to decrease or result in increased volatility in the worldwide financial markets and economy. They could also result in economic recession. Any of these occurrences could have a significant adverse impact on our financial position and results of operations.
If demand declines for horizontal diffusion furnaces and related equipment, or for other solar industry products, our financial position and results of operations could be materially and adversely affected.
The revenue of our solar equipment business is comprised primarily of sales of horizontal diffusion furnaces and our automation products. Our automation products are useable almost exclusively with horizontal diffusion furnaces. A significant part of our growth strategy involves expanding our sales to the solar industry. The solar industry is subject to risks relating to industry shortages of polysilicon, (which we discuss further herein), the continuation of government incentives, the availability of specialized capital equipment, global energy prices and rapidly changing technologies offering alternative energy sources and manufacturing processes. If the demand for solar industry products declines,
17
the demand by the solar industry for our products would also decline and our financial position and results of operations would be harmed.
There is a trend in the semiconductor industry, related to the trend to produce smaller chips on larger wafers, towards the use in semiconductor manufacturing facilities of newer technology, such as vertical diffusion furnaces. Vertical diffusion furnaces are more efficient than horizontal diffusion furnaces in certain manufacturing processes for smaller chips on larger wafers. To the extent that the trend to use vertical diffusion furnaces over horizontal diffusion furnaces continues, our revenue may decline and our corresponding ability to generate income may be adversely affected.
We may not be able to manage the business successfully through severe business cycles.
We may be unable to successfully expand or contract our business to meet fluctuating demands. Market fluctuations place significant strain on our management, personnel, systems and resources. In fiscal years 2010 and 2011, we purchased additional equipment and real estate to significantly expand our manufacturing capacity and hired additional employees to support an increase in manufacturing, field service, research and development and sales and marketing efforts. During fiscal years 2012 through 2016, the rapid decline in demand has caused us to reduce headcount in manufacturing and field service and to reduce certain research and development costs. To successfully manage our growth, we believe we must effectively:
• | maintain the appropriate number and mix of permanent, part-time, temporary and contract employees to meet the fluctuating demand for our products; |
• | train, integrate and manage personnel, particularly process engineers, field service engineers, sales and marketing personnel, and financial and information technology personnel to maintain and improve skills and morale; |
• | leverage our expanded global sales and service presence through the acquisition of BTU International |
• | retain key management and augment our management team, particularly if we lose key members; |
• | continue to enhance our customer resource and manufacturing management systems to maintain high levels of customer satisfaction and efficiencies, including inventory control; |
• | implement and improve existing and new administrative, financial and operations systems, |
procedures and controls;
• | expand and upgrade our technological capabilities; and |
• | manage multiple relationships with our customers, suppliers and other third parties. |
We may encounter difficulties in effectively managing the budgeting, forecasting and other process control issues presented by rapidly changing cycles. If we are unable to manage these cycles effectively, we may not be able to take advantage of market opportunities, develop new technologies for the production of solar cells and other products, satisfy customer requirements, execute our business plan or respond to competitive pressures.
If governmental subsidies decline or if demand for solar energy declines, our Company may not be able to continue making substantial investments in our organization to develop new products for the solar industry which may have a material adverse effect on our business.
The solar energy sector is dependent upon governmental subsidies, some of which have been scaled back and are not guaranteed to continue. A further decline in these subsidies could reduce our ability to make investments in our Company and grow our business in this market. The solar industry is currently facing overcapacity in production. This overcapacity has a significant adverse impact on the demand for the capital equipment we supply to this industry. As a result of these risks there is no assurance that we will realize a return on these investments which may have a material adverse effect on our business.
We are dependent on key personnel for our business and product development and sales, and any loss of our key
personnel to competitors or other industries could dramatically impact our ability to continue operations.
Historically, our product development has been accomplished through cooperative efforts with key customers. Our relationships with some customers are substantially dependent on personal relations and other contacts established by either our Executive Chairman or our President and Chief Executive Officer. Our relationships with major European customers that are strategically important to the development and testing of our N-type technology solar diffusion furnace and PECVD equipment are substantially dependent upon our President and Chief Executive Officer, Mr. Fokko
18
Pentinga. While there can be no assurance that such relationships will continue, such cooperation is expected to continue to be a significant element in our future development efforts.
Furthermore, it may not be feasible for any successor to maintain the same business relationships that our Executive Chairman, Mr. J.S. Whang, has established. Even though we are the beneficiary of life insurance policies on the life of Mr. Whang, in the amount of $2.0 million, there is no assurance that such amount will be sufficient to cover the cost of finding and hiring a suitable replacement for Mr. Whang. If we were to lose the services of either Mr. Whang or Mr. Pentinga for any reason, it could have a material adverse effect on our business.
We also depend on the management efforts of our officers and other key personnel and on our ability to attract and retain key personnel. During times of strong economic growth, competition is intense for highly skilled employees. There can be no assurance that we will be successful in attracting and retaining such personnel or that we can avoid increased costs in order to do so. There can be no assurance that employees will not leave Amtech or compete against us. Our failure to attract additional qualified employees, or to retain the services of key personnel, could negatively impact our financial position and results of operations.
We may not be able to keep pace with the rapid change in the technology needed to meet customer requirements.
Success in the solar and semiconductor equipment industries depends, in part, on continual improvement of existing technologies and rapid innovation of new solutions. For example, the solar industry continues to develop new technologies to increase the efficiencies and lower the costs of solar cells. Also, the semiconductor industry continues to shrink the size of semiconductor devices. These and other evolving customer needs require us to continually respond with new product developments.
Technical innovations are inherently complex and require long development cycles and appropriate professional staffing. Our future business success depends on our ability to develop and introduce new products, or new uses for existing products, that successfully address changing customer needs and win market acceptance. We must also manufacture these new products in a timely and cost-effective manner. To realize future growth through technical innovations in the solar and semiconductor industries, we must either acquire the technology through product development, merger and acquisition activity or through the licensing of products from our technology partners. Potential disruptive technologies could have a material adverse effect on our business if we do not successfully develop and introduce new products, technologies or uses for existing products in a timely manner and continually find ways of reducing the cost to produce them in response to changing market conditions or customer requirements.
Acquisitions can result in an increase in our operating costs, divert management's attention away from other operational matters and expose us to other risks associated with acquisitions.
We continually evaluate potential acquisitions and consider acquisitions an important part of our future growth strategy. In the past, we have made acquisitions of, or significant investments in, other businesses with synergistic products, services and technologies and plan to continue to do so in the future. Acquisitions, including our acquisition of R2D, SoLayTec and BTU, involve numerous risks, including, but not limited to:
• | difficulties and increased costs in connection with integration of geographically diverse personnel, |
operations, technologies and products of acquired companies;
• | diversion of management's attention from other operational matters; |
• | the potential loss of our key employees and the key employees of acquired companies; |
• | the potential loss of our key customers and suppliers and the key customers and suppliers of acquired companies; |
• | disagreement with joint venture or strategic alliance partners; |
• | failure to comply with laws and regulations as well as industry or technical standards of the overseas markets into which we expand; |
• | our inability to achieve the intended cost efficiency, level of profitability or other intended strategic goals for the acquisitions, strategic investments, joint ventures or other strategic alliances; |
• | lack of synergy, or inability to realize expected synergies, resulting from the acquisition; |
• | the risk that the issuance of our common stock, if any, in an acquisition or merger could be dilutive to our shareholders, if anticipated synergies are not realized; |
• | acquired assets becoming impaired as a result of technological advancements or worse-than-expected |
performance of the acquired company;
19
• | inability to complete proposed transactions as anticipated or at all and any ensuing obligation to pay a termination fee and any other associated transaction expenses; |
• | the potential impact of the announcement or consummation of a proposed transaction on relationships with third parties; |
• | potential changes in our credit rating, which could adversely impact the Company’s access to and cost of capital; |
• | potential litigation brought against the Company that may arise in connection with an acquisition; |
• | reductions in cash balances and/or increases in debt obligations to finance activities associated with a transaction, which reduce the availability of cash flow for general corporate or other purposes; |
• | inadequacy or ineffectiveness of an acquired company’s internal financial controls, disclosure controls and procedures, and/or environmental, health and safety, anti-corruption, human resource, or other policies or practices; and |
• | unknown, underestimated and/or undisclosed commitments or liabilities. |
Our financial position and results of operations may be materially harmed if our R&D investments do not result in timely new products that can be sold at favorable prices and obtain market acceptance.
The rapid change in technology in our industry requires that we continue to make investments in research and development in order to enhance the performance, functionality and cost of ownership of our products to keep pace with competitive products and to satisfy customer demands for improved performance, features and functionality. There can be no assurance that revenue from future products or enhancements will be sufficient to recover the development costs associated with such products or enhancements, or that we will be able to secure the financial resources necessary to fund future development. Research and development costs are typically incurred before we confirm the technical feasibility and commercial viability of a product, and not all development activities result in commercially viable products. We cannot ensure that products or enhancements will receive market acceptance, or that we will be able to sell these products at prices that are favorable to us. In addition, from time to time we receive funding from government agencies for certain strategic development programs to increase our research and development resources and address new market opportunities. As a condition to this government funding, we may be subject to certain record-keeping, audit, intellectual property rights-sharing and/or other obligations. If we do not successfully manage risks resulting from diversification and entry into new markets and industries, our business, financial condition and results of operations could be materially and adversely affected.
If we fail to maintain optimal inventory levels, our inventory obsolescence costs could increase, our liquidity could be significantly reduced or our revenue could decrease, any of which could have a material adverse effect on our business, financial condition and results of operations.
While we must maintain sufficient inventory levels to operate our business successfully and meet our customers' demands, accumulating excess inventory may have a significant unfavorable impact on our operating results and financial condition. Changing customer demands, supplier lead-times and uncertainty surrounding new product launches expose us to risks associated with excess inventory or shortages. Demand for products can change rapidly and unexpectedly. Our products are manufactured using a wide variety of purchased parts and raw materials and we must maintain sufficient inventory levels to meet the demand for the products we sell. During peak years in the solar and semiconductor industries, increases in demand for capital equipment results in longer lead-times for many important system components. Future increases in demand could cause delays in meeting shipments to our customers. Because of the variability and uniqueness of customer orders, we try to avoid maintaining an extensive inventory of materials for manufacturing. However, long lead-times for important system components during industry upturns sometimes require us to carry higher levels of inventory and make larger purchase commitments than we would otherwise make. We may be unable to sell sufficient quantities of products in the event that market demand changes, resulting in increased risk of excess inventory that could lead to obsolescence or reduced liquidity as we fulfill our purchase commitments. On the other hand, if we do not have a sufficient inventory of a product to fulfill customer orders, we may lose orders or customers, which may adversely affect our business, financial condition and results of operations. We cannot assure that we can accurately predict market demand and events to avoid inventory shortages or inventories and purchase commitments in excess of our current requirements.
Supplier capacity constraints, supplier production disruptions, supplier quality issues or price increases could increase our operating costs and adversely impact the competitive positions of our products.
20
We use a wide range of materials and services in the production of our products including custom electronic and mechanical components, and we use numerous suppliers of materials. Although we make what we believe are reasonable efforts to ensure that parts are available from multiple suppliers, this may not always be practical or possible. Accordingly, some key parts are being procured from a single supplier or a limited group of suppliers. Key vendors include suppliers of controllers, quartz and silicon carbide for our diffusion systems, two steel mills capable of producing the types of steel to the tolerances needed for our wafer carriers, an injection molder that molds plastic inserts into our steel carriers, an adhesive manufacturer that supplies the critical glue and a pad supplier that produces a unique material used in the manufacture of our polishing templates. We also rely on third parties for certain machined parts, steel frames and metal panels and other components used particularly in the assembly of solar and semiconductor production equipment.
Because the selling price of some of our systems exceeds $1.0 million, the delay in the shipment of even a single system could cause significant variations in our quarterly revenue. In the event of supplier capacity constraints, production disruptions, or failure to meet our requirements concerning quality, cost or performance factors, we may transfer our business to alternative sourcing which could lead to further delays, additional costs or other difficulties. If, in the future, we do not receive, in a timely and cost-effective manner, a sufficient quantity and quality of parts to meet our production requirements, our financial position and results of operations may be materially and adversely affected.
If the practice of requiring certain customers to make advance payments when they place orders with us ceases, or if our customers fail to meet their payment obligations, we may experience increased needs to finance our working capital requirements and may be exposed to increased credit risk, which may materially and adversely affect our financial position and results of operations.
We require many of our customers to make an advance payment representing a percentage of their orders, which is a business practice that helps us manage our accounts receivable, prepay our suppliers and reduce the amount of funds that we need to finance our working capital requirements. We cannot assure that this practice will not cease in the future. If this practice ceases, we may not be able to secure additional financing on a timely basis or on terms acceptable to us or at all. Currently, a significant portion of our revenue is derived from credit sales to our customers, generally with payments due within less than three months after shipment. As a result, any future decrease in the use of cash advance payments by our customers may negatively impact our short-term liquidity and, coupled with increased credit sales to a small number of major customers, expose us to additional and more concentrated credit risk since a significant portion of our outstanding accounts receivable is derived from sales to a limited number of customers. We may need to, from time to time, commence legal proceedings to recover accounts receivables from customers, which may also increase our cost. Any failure by our customers to settle outstanding accounts receivable in the future could materially and adversely affect our cash flow, financial condition and results of operations.
We may not be able to generate sufficient cash flows or obtain access to external financing necessary to fund and expand our operations as planned.
Cash flows may be insufficient to provide adequate working capital in the future and we may require additional financing for further implementation of our growth plans. There is no assurance that any additional financing will be available if and when required, or, even if available, that it would not materially dilute the ownership percentage of the then existing shareholders, result in increased expenses or result in covenants or special rights that would restrict our operations.
We may incur impairment charges to goodwill or long-lived assets.
We have acquired, and may acquire in the future, goodwill and other long-lived intangible assets. Goodwill and purchased intangible assets with indefinite useful lives are not amortized, but are reviewed for impairment at least annually, typically during the fourth quarter of each fiscal year, and more frequently when events or changes in circumstances indicate that the carrying value of an asset may not be recoverable. The review compares the fair value for each of our reporting units to its associated carrying value, including goodwill. Factors that could lead to impairment of goodwill and intangible assets include adverse industry or economic trends, reduced estimates of future cash flows, declines in the market price of our common stock, changes in our strategies or product portfolio, and restructuring activities. Our valuation methodology for assessing impairment requires management to make judgments and assumptions based on historical experience and projections of future operating performance. We may be required to record a charge to earnings during the period in which an impairment of goodwill or amortizable intangible assets is determined to exist, which could materially and adversely affect our results of operations.
21
Most of our production, storage, and administrative facilities are located in close proximity to one another in The Netherlands. Any damage or disruption at these facilities could have a material adverse effect on our business, financial condition and results of operations.
Our production, storage and administrative facilities are located in close proximity to one another in The Netherlands. A natural disaster or other unanticipated catastrophic event, including flood, power interruption, and war, could significantly disrupt our ability to manufacture our products and operate our business. If any of our productions facilities or equipment were to experience any significant damage or downtime, we would be unable to meet our production targets, our business would suffer, and it could have a material adverse effect on our business, financial condition and results of operations.
If third parties violate our proprietary rights, in which we have made significant investments, such events could result in a loss of value of some of our intellectual property or costly litigation.
Our success is dependent in part on our technology and other proprietary rights. We own various United States and international patents and have additional pending patent applications relating to some of our products and technologies. Protecting and defending our patents domestically, and especially internationally, is costly. In addition, the process of seeking patent protection is lengthy and expensive. Therefore, we cannot be certain that pending or future applications will actually result in issued patents, or that issued patents will be of sufficient scope or strength to provide meaningful protection or commercial advantage to us. Other companies and individuals, including our larger competitors, may develop technologies that are similar or superior to our technology or design around the patents we own or license. We also maintain trademarks on certain of our products and claim copyright protection for certain proprietary software and documentation. However, we can give no assurance that our trademarks and copyrights will be upheld or will successfully deter infringement by third parties. The patent covering technology that we license and use in our manufacture of insert carriers has expired, which may have the effect of diminishing or eliminating any competitive advantage we may have with respect to this manufacturing process.
We attempt to protect our trade secrets and other proprietary information through confidentiality agreements with our customers, suppliers, employees and consultants and through other security measures. We also maintain exclusive and non-exclusive licenses with third parties for the technology used in certain products. However, these employees, consultants and third parties may breach these agreements, and we may not have adequate remedies for wrongdoing. In addition, the laws of certain territories, such as China, in which we develop, manufacture or sell our products may not protect our intellectual property rights to the same extent as do the laws of the United States.
We may face intellectual property infringement claims that could be time-consuming and costly to defend and could result in our loss of significant rights and the assessment of treble damages.
From time to time, we have received communications from other parties asserting the existence of patent rights or other intellectual property rights that they believe cover certain of our products, processes, technologies or information. In such cases, we evaluate our position and consider the available alternatives, which may include seeking licenses to use the technology in question on commercially reasonable terms or defending our position. We cannot ensure that licenses can be obtained, or if obtained will be on acceptable terms, or that litigation or other administrative proceedings will not occur.
Some of these claims may lead to litigation. We cannot assure that we will prevail in these actions, or that other actions alleging misappropriation or misuse by us of third-party trade secrets, infringement by us of third-party patents and trademarks or the validity of our patents, will not be asserted or prosecuted against us. Intellectual property litigation, regardless of outcome, is expensive and time-consuming, could divert management's attention from our business and have a material negative effect on our business, operating results or financial condition. If there is a successful claim of infringement against us, we may be required to pay substantial damages (including treble damages if we were to be found to have willfully infringed a third party's patent) to the party claiming infringement, incur costs to develop non-infringing technology, stop selling or using technology that contains the allegedly infringing intellectual property or, enter into royalty or license agreements that may not be available on acceptable or commercially practical terms, if at all. Our failure to develop non-infringing technologies or license the proprietary rights on a timely basis could harm our business. Parties making infringement claims on future issued patents may be able to obtain an injunction that would prevent us from selling or using our technology that contains the allegedly infringing intellectual property, which could harm our business.
22
Failure to manage our growth, or otherwise develop appropriate internal organizational structures, internal control environment and risk monitoring and management systems in line with the size of our organization could result in a material adverse effect on our business, prospects, financial condition and results of operations.
Our business and operations have expanded rapidly through organic growth and acquisitions, as well as successfully managed frequent cyclical contractions. Significant management resources must be expended to develop and implement appropriate structures for internal organization and information flow, an effective internal control environment and risk monitoring and management systems in line with our fast growth as well as to hire and integrate qualified employees into our organization. It is challenging for us to hire, integrate and retain qualified employees in key areas of operations, such as engineers and technicians who are familiar with the industries. In addition, disclosure and other ongoing obligations associated with being a public company further increase the challenges to our finance, legal and accounting team. It is possible that our existing risk monitoring and management system could prove to be inadequate. If we fail to appropriately develop and implement structures for internal organization and information flow, an effective internal control environment and a risk monitoring and management system, we may not be able to identify unfavorable business trends, administrative oversights or other risks that could materially and adversely affect our business, prospects, financial condition and results of operations.
If we fail to maintain an effective system of internal controls, we may not be able to accurately report our financial results or prevent fraud. As a result, our stockholders could lose confidence in our financial reporting, which could have a negative impact on our business and the price of our common stock.
To maintain compliance with Section 404 of the Sarbanes-Oxley Act of 2002 we have assessed, strengthened and tested our system of internal controls. Despite our conclusion that our system of internal controls was effective as of September 30, 2016, we must continue to maintain our processes and systems and adapt them to changes in our business as it evolves. This continuous process of maintaining and adapting our internal controls and complying with Section 404 is expensive, time-consuming and requires significant management attention. We cannot be certain that our internal control measures will continue to provide adequate control over our financial reporting processes and ensure compliance with Section 404. Furthermore, as our business changes, our internal controls may become more complex and we may require significantly more resources to ensure our internal controls remain effective. In addition, if we reduce a portion of our workforce, as we have done recently, our ability to adequately maintain our internal controls may be adversely impacted. Failure to implement required new or improved controls, or difficulties encountered in their implementation, could harm our operating results or cause us to fail to meet our reporting obligations. If we or our independent registered public accounting firm identify material weaknesses, the disclosure of that fact may result in negative investor perceptions of our Company and could cause a decline in the market price of our stock.
Unsatisfactory performance of, or defects in our products may cause us to incur additional warranty expenses, damage our reputation and cause our sales to decline.
As of September 30, 2016, 2015 and 2014, our accrued warranty costs amounted to $0.8 million, $0.8 million and $0.6 million, respectively. Our assumptions regarding the durability and reliability of our products may not be accurate, and because our products have relatively long warranty periods, we cannot assure you that the amount of accrued warranty by us for our products will be adequate in light of the actual performance of our products. If we experience a significant increase in warranty claims, we may incur significant repair and replacement costs associated with such claims. Furthermore, widespread product underperformances or failures will damage our reputation and customer relationships and may cause our sales to decline, which in turn could have a material adverse effect on our financial condition and results of operations.
We face the risk of product liability claims or other litigation, which could be expensive and may divert management's attention from running our business.
The Company and its subsidiaries are defendants from time to time in actions for matters arising out of our business operations. The manufacture and sale of our products, which, in our customers' operations, involve toxic materials and robotic machinery, involve the risk of product liability claims. In addition, a failure of one of our products at a customer site could interrupt the business operations of our customer. Our existing insurance coverage limits may not be adequate to protect us from all liabilities that we might incur in connection with the manufacture and sale of our products if a successful product liability claim or series of product liability claims were brought against us. We may also be involved in other legal proceedings or claims and experience threats of legal action from time to time in the ordinary course of our business.
23
Where appropriate, we intend to vigorously defend all claims. However, any actual or threatened claims, even if not meritorious or material, could result in the expenditure of significant financial and managerial resources. The continued defense of these claims and other types of lawsuits could divert management's attention away from running our business. In addition, required amounts to be paid in settlement of any claims, and the legal fees and other costs associated with their defense or also settlement, cannot be estimated and could, individually or in the aggregate, materially harm our financial condition. We may also experience higher than expected warranty claims.
We are subject to environmental regulations, and our inability or failure to comply with these regulations could result in significant costs or the suspension of our ability to operate portions of our business.
We are subject to environmental regulations in connection with our business operations, including regulations related to manufacturing and our customers' use of our products. From time to time, we receive notices regarding these regulations. It is our policy to respond promptly to these notices and to take any necessary corrective action. Our failure or inability to comply with existing or future environmental regulations could result in significant remediation liabilities, the imposition of fines and/or the suspension or termination of development, manufacturing or use of certain of our products or facilities, each of which could damage our financial position and results of operations.
Regulations related to conflict minerals could adversely impact our business.
The Dodd-Frank Wall Street Reform and Consumer Protection Act contains provisions to improve transparency and accountability concerning the supply of certain minerals, known as conflict minerals, originating from the Democratic Republic of Congo (DRC) and adjoining countries. As a result, the SEC has adopted annual disclosure and reporting requirements for those companies who use conflict minerals mined from the DRC and adjoining countries in their products. These new requirements require companies to conduct due diligence efforts to determine whether products contain such conflict minerals, with initial disclosure requirements beginning in May of 2014. Our supply chain is complex and we may be unable to verify the origins for all metals used in our products. As a result, we may be unable to certify that our products are conflict mineral free.
Our results of operations are difficult to predict, and if we do not meet the market expectations, the price of the our stock will likely decline.
Our results of operations are difficult to predict and have fluctuated from time to time in the past. We expect that our results of operations may continue to fluctuate from time to time in the future. It is possible that our results of operations in some reporting periods will be below market expectations. If our results of operations for a particular reporting period are lower than the market expectations for such reporting period, investors may react negatively, and as a result, the price of our stock may materially decline.
Information security breaches or failures of our information technology systems may have a negative impact on our operations and our reputation.
We may be subject to information security breaches or failures of our information technology systems caused by advanced persistent threats, unauthorized access, sabotage, vandalism, terrorism or accident. Compromises and failure to our information technology networks and systems could result in unauthorized release of our confidential or proprietary information, or that of our customers and suppliers, as well as employee personal data. The costs to protect against or alleviate breaches and systems failures require significant human and financial capital expenditures, which in turn could potentially disrupt our continuing operations, increase our liability as a result of compromises to personally identifiable information, and may lead to a material and adverse effect on our financial reporting, reputation and business.
The Company's income taxes are subject to variables beyond our control.
The Company's net income and cash flow may be adversely affected by conditions affecting income taxes which are outside the Company's control. Examples of the potential uncontrollable circumstances that could affect our tax rate:
• | The Company sells and operates globally in the United States, Europe and Asia. Disagreement could occur on the jurisdiction of income and taxation among different governmental tax authorities. Potential areas of dispute may include transfer pricing, intercompany charges and intercompany balances. |
24
• | The Company is subject to a China withholding tax on certain non-tangible charges made under our transfer pricing agreements. The interpretation of what charges are subject to the tax and when the liability for the tax occurs has varied and could change in the future. |
• | Tax rates may increase and, therefore, have a material adverse effect on our earnings and cash flows. |
Securities litigation brought against the Company, including litigation related to the BTU acquisition could cause the Company to incur substantial costs and divert management’s attention and resources.
In the past, securities class action litigation often has been brought against a Company following periods of volatility in the market price of its securities or in connection with strategic transactions. The Company may in the future be the target of securities litigation. Any securities litigation could result in substantial costs and could divert the attention and resources of the Company’s management.
As previously disclosed in the Company’s filings with the SEC, shortly after the Company entered into the merger agreement with BTU, two separate putative stockholder class action complaints (together, the "Stockholder Actions") were filed in the Court of Chancery of the State of Delaware (the "Delaware Court"). The first was filed on November 4, 2014 and the second on November 17, 2014, on behalf of BTU’s public stockholders, against BTU, members of the BTU board, Amtech and the special purpose merger subsidiary. The Stockholder Actions were consolidated on December 4, 2014. The complaints generally alleged that, in connection with entering into the merger agreement, the BTU board of directors breached certain fiduciary duties owed to BTU's stockholders. The complaints sought various forms of declaratory and injunctive relief, as well as compensatory damages.
On February 18, 2016, the Delaware Court entered the Order approving the Amended Stipulation of Settlement. As a result, the Released Claims were dismissed with prejudice and without any admission of wrongdoing by any of the parties to the Stockholder Actions. Pursuant to the Amended Stipulation of Settlement, BTU, its insurer(s), or its successor(s) in interest are responsible for payment of fees and expenses in the amount of $325,000 which were paid in full on April 1, 2016.
As described above, the Released Claims are limited solely to claims related to any disclosures (or lack thereof) to BTU’s stockholders concerning the merger and any fiduciary claims concerning the decision to enter into the merger. While we are currently unaware of any other pending or threatened litigation related to additional claims arising from the Stockholder Actions, any future claims are uncertain, so additional harm could potentially result to the Company from this litigation, which may cause the Company to incur substantial costs and divert management’s attention from operational matters.
Our officers, directors, and largest stockholders could choose to act in their best interests and not necessarily those of our other stockholders.
Our directors, executive officers and holders of five percent or more of our outstanding common stock and their affiliates represent a significant portion of our common stock held as of September 30, 2016, and, therefore, have significant influence over the management and corporate policies of the Company. These stockholders have significant influence over all matters submitted to our stockholders, including the election of our directors and approval of business combinations, and could potentially initiate or delay, deter or prevent a change of control of our Company. Circumstances may occur in which the interests of these stockholders may conflict with the interests of the Company or those of our other stockholders, and these stockholders may cause the Company to take actions that align with their interests. Should conflicts of interest arise, we can provide no assurance that these stockholders would act in the best interests of our other stockholders or that any conflicts of interest would be resolved in a manner favorable to our other stockholders. In addition, involvement of certain activist stockholders may impact our ability to recruit and retain talent or otherwise distract management or make decisions that we believe are in the long-term interest of all shareholders.
ITEM 1B. UNRESOLVED STAFF COMMENTS
None.
25
ITEM 2. PROPERTIES
We believe that our properties are adequate for our current needs. In addition, we believe that adequate space can be obtained to meet our foreseeable business needs. The following chart identifies the principal properties which we own or lease.
Location | Use | Size | ||
Corporate | ||||
Tempe, AZ | Corporate | 15,000 sf | ||
Solar Equipment Segment | ||||
Vaassen, The Netherlands | Office, Warehouse & Mfg. | 54,000 sf | ||
Vaassen, The Netherlands | Warehouse | 23,000 sf | ||
Clapiers, France | Office, Mfg. & Warehouse | 21,000 sf | ||
Semiconductor Equipment Segment | ||||
N. Billerica, MA | Office, Mfg. & Warehouse | 150,000 sf | ||
N. Billerica, MA | Office, Mfg. & Warehouse | 17,000 sf | ||
Ashvale, Surrey, U.K. | Office | 1,900 sf | ||
Shanghai, China | Office, Mfg. & Warehouse | 49,000 sf | ||
Singapore | Office | 1,600 sf | ||
Penang, Malaysia | Office | 1,570 sf | ||
Polishing Supplies Segment | ||||
Carlisle, PA | Office & Mfg. | 22,000 sf | ||
ITEM 3. LEGAL PROCEEDINGS
The Company and its subsidiaries are defendants from time to time in actions for matters arising out of their business operations. The Company does not believe that any matters or proceedings presently pending will have a material adverse effect on its consolidated financial position, results of operations or liquidity.
As previously disclosed in the Company’s filings with the SEC, shortly after the Company entered into the merger agreement with BTU, two separate putative stockholder class action complaints (together, the "Stockholder Actions") were filed in the Court of Chancery of the State of Delaware (the "Delaware Court"). The first was filed on November 4, 2014 and the second on November 17, 2014, on behalf of BTU’s public stockholders, against BTU, members of the BTU board, Amtech and the special purpose merger subsidiary. The Stockholder Actions were consolidated on December 4, 2014. The complaints generally alleged that, in connection with entering into the merger agreement, the BTU board of directors breached certain fiduciary duties owed to BTU's stockholders. The complaints sought various forms of declaratory and injunctive relief, as well as compensatory damages.
On February 18, 2016, the Delaware Court entered the Order approving the Amended Stipulation of Settlement. As a result, the Released Claims were dismissed with prejudice and without any admission of wrongdoing by any of the parties to the Stockholder Actions. Pursuant to the Amended Stipulation of Settlement, BTU, its insurer(s), or its successor(s) in interest are responsible for payment of fees and expenses in the amount of $325,000 which were paid in full on April 1, 2016.
As described above, the Released Claims are limited solely to claims related to any disclosures (or lack thereof) to BTU’s stockholders concerning the merger and any fiduciary claims concerning the decision to enter into the merger. While we are currently unaware of any other pending or threatened litigation related to additional claims arising from the Stockholder Actions, any future claims are uncertain, so additional harm could potentially result to the Company from this litigation, which may cause the Company to incur substantial costs and divert management’s attention from operational matters.
26
ITEM 4. MINE SAFETY DISCLOSURES
Not applicable.
27
PART II
ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
MARKET INFORMATION
Our common stock, par value $0.01 per share (“Common Stock”), is trading on the NASDAQ Global Market (formerly the NASDAQ National Market), under the symbol “ASYS.” On November 22, 2016, the closing price of our Common Stock as reported on the NASDAQ Global Market was $4.91 per share. The following table sets forth the high and low bid price at which the shares of our Common Stock traded for each quarter of fiscal 2016 and 2015, as reported by the NASDAQ Global Market.
Fiscal 2016 | Fiscal 2015 | ||||||||||||||
High | Low | High | Low | ||||||||||||
First quarter | $ | 8.40 | $ | 4.12 | $ | 11.15 | $ | 7.52 | |||||||
Second quarter | $ | 7.83 | $ | 4.41 | $ | 12.59 | $ | 7.96 | |||||||
Third quarter | $ | 7.14 | $ | 5.53 | $ | 12.93 | $ | 9.84 | |||||||
Fourth quarter | $ | 6.52 | $ | 4.75 | $ | 11.11 | $ | 4.27 | |||||||
COMPARISON OF STOCK PERFORMANCE
The following line graph compares cumulative total shareholder return, assuming reinvestment of dividends, for the Company’s Common Stock, NASDAQ Composite Index and the NASDAQ Industrial Index. Because the Company did not pay dividends on its Common Stock during the measurement period, the calculation of the cumulative total shareholder return on the Company’s Common Stock did not include dividends. The following graph assumes that $100 was invested on October 1, 2011.
HOLDERS
As of November 22, 2016, there were 513 shareholders of record of our Common Stock. Based upon a recent survey of brokers, we estimate there were approximately an additional 4,288 beneficial shareholders who held shares in brokerage or other investment accounts as of that date.
28
DIVIDENDS
We have never paid dividends on our Common Stock. Our present policy is to apply cash to investment in product development, acquisition or expansion; consequently, we do not expect to pay dividends on Common Stock in the foreseeable future.
SECURITIES AUTHORIZED FOR ISSUANCE UNDER EQUITY COMPENSATION PLANS
The following table sets forth certain information, as of September 30, 2016, concerning outstanding options and rights to purchase Common Stock granted to participants in all of the Company’s equity compensation plans and the number of shares of Common Stock remaining available for issuance under such equity compensation plans.
Number of securities to be issued upon exercise of outstanding options, warrants and rights (a) | Weighted-average exercise price of outstanding options, warrants and rights (b) | Number of securities remaining available for future issuance under equity compensation plans (excluding securities reflected in column (a)) (c) | |||||||
Plan Category | |||||||||
Equity compensation plans approved by security holders (1) | 1,841,567 | $ | 8.15 | 853,702 | |||||
Equity compensation plans not approved by security holders | — | — | |||||||
Total | 1,841,567 | 853,702 | |||||||
____________________
(1) | Represents the 1998 Employee Stock Option Plan, the 2007 Employee Stock Incentive Plan and the Non-Employee Director Stock Option Plan and any respective amendments to each thereto. |
COMPANY PURCHASES OF EQUITY SECURITIES
There were no purchases of equity securities in fiscal 2016.
29
ITEM 6. SELECTED FINANCIAL DATA
This selected financial data should be read in conjunction with Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and our consolidated financial statements (including the related notes thereto) contained elsewhere in this report.
Years Ended September 30, | |||||||||||||||||||
2016 | 2015 | 2014 | 2013 | 2012 | |||||||||||||||
Operating Data: | |||||||||||||||||||
Net revenue | $ | 120,308 | $ | 104,883 | $ | 56,501 | $ | 34,798 | $ | 81,539 | |||||||||
Gross profit | $ | 34,063 | $ | 27,008 | $ | 11,626 | $ | 4,313 | $ | 9,193 | |||||||||
Operating loss (1) | $ | (7,908 | ) | $ | (13,521 | ) | $ | (13,089 | ) | $ | (19,994 | ) | $ | (32,984 | ) | ||||
Net loss attributable to Amtech Systems, Inc.(2)(3) | $ | (7,008 | ) | $ | (7,771 | ) | $ | (13,047 | ) | $ | (20,069 | ) | $ | (23,031 | ) | ||||
Loss per share attributable to Amtech Systems, Inc.: | |||||||||||||||||||
Basic loss per share | $ | (0.53 | ) | $ | (0.65 | ) | $ | (1.34 | ) | $ | (2.11 | ) | $ | (2.43 | ) | ||||
Diluted loss per share | $ | (0.53 | ) | $ | (0.65 | ) | $ | (1.34 | ) | $ | (2.11 | ) | $ | (2.43 | ) | ||||
Order backlog | $ | 48,610 | $ | 34,589 | $ | 28,522 | $ | 26,766 | $ | 18,703 | |||||||||
Balance Sheet Data: | |||||||||||||||||||
Cash and cash equivalents | $ | 27,655 | $ | 25,852 | $ | 27,367 | $ | 37,197 | $ | 46,726 | |||||||||
Working capital | $ | 44,860 | $ | 46,331 | $ | 32,289 | $ | 42,861 | $ | 58,832 | |||||||||
Total assets | $ | 118,430 | $ | 125,456 | $ | 89,904 | $ | 110,947 | $ | 129,022 | |||||||||
Total current liabilities | $ | 38,064 | $ | 39,371 | $ | 33,136 | $ | 41,334 | $ | 42,611 | |||||||||
Total equity | $ | 65,339 | $ | 72,647 | $ | 53,588 | $ | 66,803 | $ | 84,051 | |||||||||
____________________
(1) | Includes $0.1 million, $0.1 million, $0.3 million and $3.7 million of expense related to inventory write-downs in fiscal 2016, 2015, 2014 and 2013, respectively. Includes $12.8 million of expense related to inventory write-downs and loss contracts for inventory purchase commitments, and $5.4 million of impairment charges in fiscal 2012. Includes $0.6 million and $0.9 million of expense related to restructuring in fiscal 2015 and 2013, respectively. Includes $1.7 million, $(0.2) million, $1.3 million, $0.2 million, and $0.3 million of expense related to provision for doubtful accounts receivable in fiscal 2016, 2015, 2014, 2013, and 2012, respectively. |
(2) | Includes a pre-tax gain of $2.6 million on the sale of service rights in 2016 and $8.8 million gain on deconsolidation resulting from the deconsolidation of Kingstone on September 16, 2015. |
(3) | Excludes losses of $1.5 million, $1.3 million, $1.7 million, $2.0 million and $5.6 million in fiscal 2016, 2015, 2014, 2013, and 2012, respectively, which amounts are attributable to the 55% controlling interest in Kingstone acquired February 18, 2011 and the 51% interest in SoLayTec acquired December 24, 2014. |
30
ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The following discussion of our financial condition and results of operations should be read in conjunction with our Consolidated Financial Statements and the related notes included in Item 8, “Financial Statements and Supplementary Data” in this Annual Report on Form 10-K. This discussion contains forward-looking statements, which involve risk and uncertainties. Our actual results could differ materially from those anticipated in the forward-looking statements as a result of certain factors including, but not limited to, those discussed in “Risk Factors” and elsewhere in this Annual Report on Form 10-K. Please refer to page 3 for further information regarding forward-looking statements and Item 1A for a description of our risk factors.
Introduction
Management’s Discussion and Analysis (“MD&A”) is intended to facilitate an understanding of our business and results of operations. MD&A consists of the following sections:
• | Overview: a summary of our business. |
• | Results of Operations: a discussion of operating results. |
• | Liquidity and Capital Resources: an analysis of cash flows, sources and uses of cash, financial position and off-balance sheet arrangements. |
• | Contractual Obligations and Commercial Commitments: a list of obligations and commercial commitments. |
• | Critical Accounting Policies: a discussion of critical accounting policies that require the exercise of judgments and estimates. |
• | Impact of Recently Issued Accounting Pronouncements: a discussion of how we are affected by recent pronouncements. |
Overview
We operate in three reportable business segments: (i) solar, (ii) semiconductor and (iii) polishing. In our solar segment, we are a leading global supplier of thermal processing systems, including diffusion, plasma-enhanced chemical vapor deposition (“PECVD”), atomic layer deposition (“ALD”), and related automation, parts and services, to the solar/photovoltaic industry. In our semiconductor segment, we supply thermal processing equipment, including solder reflow equipment and related controls for use by leading semiconductor manufacturers, and in electronics assembly for automotive and other industries. In our polishing supplies segment, we produce consumables and machinery for lapping (fine abrading) and polishing of materials, such as sapphire substrates, optical components, silicon wafers, numerous types of crystalline materials, ceramics and metal components.
Our customers are primarily manufacturers of solar cells and integrated circuits. The solar cell and semiconductor industries are cyclical and historically have experienced significant fluctuations. Our revenue is impacted by these broad industry trends. Since 2012, the solar cell industry has experienced a structural imbalance between supply and demand. This imbalance has negatively impacted our results of operations.
Our strategy has been, and continues to be, to grow the Company through strategic product development and acquisitions. In addition to internal product development, we have acquired companies with complementary products or products that serve adjacent process steps. On January 30, 2015, we completed the acquisition of BTU International Inc. (“BTU”), which provides complementary thermal processing technologies in the semiconductor, electronics and solar sectors, and strengthens our footprint in China and other key geographic markets. On December 24, 2014, we expanded our participation in the solar market by acquiring a 51% controlling interest in SoLayTec B.V. (“SoLayTec”), which provides atomic layer deposition systems used in high efficiency solar cells.
In September 2015, we sold a portion of our interest in Kingstone Hong Kong Limited (“Kingstone Hong Kong”) that is the parent company of Shanghai Kingstone (collectively with Kingstone Hong Kong, “Kingstone”), a Shanghai-
31
based technology company specializing in ion implant solutions for the solar and semiconductor industries (in which we acquired a 55% ownership in February 2011). Proceeds from the sale of shares were paid to Amtech and used to support the company's core strategic initiatives. We now own 15% of the holding company, Kingstone Hong Kong, following consummation of the transaction, which effectively represents an 8% beneficial ownership interest in the Shanghai operating entity, Shanghai Kingstone.
Results of Operations
The following table sets forth certain operational data as a percentage of net revenue for the periods indicated:
Years Ended September 30, | ||||||||
2016 | 2015 | 2014 | ||||||
Net revenue | 100.0 | % | 100.0 | % | 100.0 | % | ||
Cost of sales | 71.7 | % | 74.2 | % | 79.4 | % | ||
Gross margin | 28.3 | % | 25.8 | % | 20.6 | % | ||
Selling, general and administrative | 28.2 | % | 31.5 | % | 32.6 | % | ||
Restructuring charges | — | % | 0.6 | % | — | % | ||
Research, development and engineering | 6.7 | % | 6.6 | % | 11.1 | % | ||
Operating loss | (6.6 | )% | (12.9 | )% | (23.1 | )% | ||
Gain on deconsolidation of Kingstone | — | % | 8.4 | % | — | % | ||
Other gain | 2.1 | % | — | % | — | % | ||
Investment income | 0.2 | % | — | % | — | % | ||
Interest and other income, net | (0.3 | )% | (0.1 | )% | — | % | ||
Loss before income taxes | (4.6 | )% | (4.6 | )% | (23.1 | )% | ||
Income tax provision | 2.6 | % | 1.8 | % | 2.2 | % | ||
Net loss | (7.2 | )% | (6.4 | )% | (25.3 | )% | ||
Add: net (income) loss attributable to noncontrolling interest | 1.3 | % | (1.0 | )% | 2.2 | % | ||
Net loss attributable to Amtech Systems, Inc. | (5.9 | )% | (7.4 | )% | (23.1 | )% | ||
Fiscal 2016 compared to Fiscal 2015
Net Revenue
Net revenue consists of revenue recognized upon shipment or installation of equipment, with the exception of products using new technology, for which revenue is recognized upon customer acceptance. Spare parts sales are recognized upon shipment and service revenue is recognized upon completion of the service activity or ratably over the term of the service contract. Since the majority of our revenue is generated from large system sales, revenue and operating income can be significantly impacted by the timing of system shipments, and recognition of revenue based on customer acceptances. See Critical Accounting Policies – Revenue Recognition.
Years Ended September 30, | ||||||||||||||
Segment | 2016 | 2015 | Inc (Dec) | % | ||||||||||
(dollars in thousands) | ||||||||||||||
Solar | $ | 60,946 | $ | 56,689 | $ | 4,257 | 8 | % | ||||||
Semiconductor | 50,637 | 37,250 | 13,387 | 36 | % | |||||||||
Polishing | 8,725 | 10,944 | (2,219 | ) | (20 | )% | ||||||||
Total net revenue | $ | 120,308 | $ | 104,883 | $ | 15,425 | 15 | % | ||||||
Net revenue for the years ended September 30, 2016 and 2015 were $120.3 million and $104.9 million, respectively, an increase of $15.4 million or 15%. Revenue from the solar segment increased 8% primarily due to higher ALD sales,
32
partially offset by less revenues due to the deconsolidation of Kingstone. Additionally, the solar segment had a net deferral of revenue of $0.8 million in fiscal 2016 compared to net recognition of previously-deferred revenue of $0.9 million in fiscal 2015. Revenue from the semiconductor segment increased 36% due primarily to inclusion of BTU for all of fiscal year 2016 versus eight months in 2015, improved industry trends, and changes in product mix.
Revenues from the polishing supplies segment decreased due primarily to decreases in sales of polishing templates and equipment resulting from competitive pressures caused, in part, by the strength of the U.S. dollar versus other currencies in the markets in which we compete.
Backlog and Orders
Our backlog as of September 30, 2016 and 2015 was $48.6 million and $34.6 million, respectively. Our backlog as of September 30, 2016 included approximately $34.0 million of orders and deferred revenue from our solar industry customers compared to $22.9 million as of September 30, 2015. New orders booked in fiscal 2016 were $138.3 million ($76.0 million solar) compared to $109.9 million ($61.2 million solar) in fiscal 2015. At the end of fiscal 2016, two customers individually accounted for 26% and 14% of our total backlog. At the end of fiscal 2015, two customers individually accounted for 15% and 14% of our total backlog. The orders included in our backlog are generally credit approved customer purchase orders believed to be firm, and are generally expected to ship within the next twelve months. Because our orders are typically subject to cancellation or delay by the customer, our backlog at any particular point in time is not necessarily representative of actual sales for succeeding periods, nor is backlog any assurance that we will realize profit from completing these orders. Our backlog also includes revenue deferred pursuant to our revenue recognition policy, derived from orders that have already been shipped, but which have not met the criteria for revenue recognition.
Gross Profit and Gross Margin
Gross profit is the difference between net revenue and cost of goods sold. Cost of goods sold consists of purchased material, labor and overhead to manufacture equipment or spare parts and the cost of service and support to customers for warranty, installation and paid service calls. Gross margin is gross profit as a percent of net revenue.
Years Ended September 30, | ||||||||||||||
Segment | 2016 | 2015 | Inc (Dec) | % | ||||||||||
(dollars in thousands) | ||||||||||||||
Solar | $ | 10,973 | $ | 11,639 | $ | (666 | ) | (6 | )% | |||||
Semiconductor | 20,301 | 11,442 | 8,859 | 77 | % | |||||||||
Polishing | 2,789 | 3,927 | (1,138 | ) | (29 | )% | ||||||||
Total gross profit | $ | 34,063 | $ | 27,008 | $ | 7,055 | 26 | % | ||||||
Gross profit for the years ended September 30, 2016 and 2015 was $34.1 million and $27.0 million respectively; an increase of $7.1 million or 26%. Gross margin for fiscal years 2016 and 2015 was 28% and 26%, respectively. Gross margin for the solar segment decreased to 18% in fiscal 2016, compared to 21% in fiscal 2015 due primarily to the net deferral of revenue in 2016 versus the net recognition of previously deferred revenue in fiscal 2015. In the semiconductor segment gross margin was 40% in fiscal 2016, compared to 31% in fiscal 2015 primarily due to the BTU acquisition and favorable product mix. In fiscal 2016 and 2015, use of previously written down inventory had a $2.4 million and $4.0 million favorable impact, respectively. In fiscal 2016, we had a net profit deferral of $0.8 million compared to a net recognition of previously deferred profit of $1.3 million in fiscal 2015. Gross margin from our polishing supplies segment was 32% and 36% in fiscal years 2016 and 2015, respectively. Lower margins in this segment resulted primarily from lower sales volumes.
Selling, General and Administrative Expenses
Selling, general and administrative ("SG&A") expenses consist of the cost of employees, consultants and contractors, facility costs, sales commissions, shipping costs, promotional marketing expenses, legal and accounting expenses and bad debt expense.
33
Total SG&A expenses for the years ended September 30, 2016 and 2015 were $34.0 and $33.0 million, respectively. In fiscal 2016, SG&A increased due to higher expenses incurred by BTU, which reflects twelve months of expenses in fiscal 2016 versus eight months in fiscal 2015 year-to-date, as well as a provision for doubtful accounts receivable of $1.7. The increases in SG&A were offset by lower acquisition and legal fees related to our acquisition of BTU in January 2015, lower commissions expense resulting from lower commissionable sales and lower expenses due to the deconsolidation of Kingstone. SG&A expense includes $1.4 million and $1.2 million of stock-based compensation expense for fiscal years 2016 and 2015, respectively.
Impairment and Restructuring Charges
There were no restructuring charges for the year ended September 30, 2016. Restructuring charges for the year ended September 30, 2015 were $0.6 million, related primarily to severance costs in connection with the BTU acquisition.
Research, Development and Engineering
Research, development and engineering ("RD&E") expenses consist of the cost of employees, consultants and contractors who design, engineer and develop new products and processes as well as materials and supplies used in producing prototypes. We receive reimbursements through governmental research and development grants which are netted against these expenses when certain conditions have been met.
Years Ended September 30, | ||||||||||||||
2016 | 2015 | Inc (Dec) | % | |||||||||||
(dollars in thousands) | ||||||||||||||
Research, development and engineering | $ | 9,535 | $ | 13,214 | $ | (3,679 | ) | (28 | )% | |||||
Grants earned | (1,531 | ) | (6,296 | ) | 4,765 | (76 | )% | |||||||
Net research, development and engineering | $ | 8,004 | $ | 6,918 | $ | 1,086 | 16 | % | ||||||
RD&E expense, net of grants earned, for the fiscal year ended September 30, 2016 increased $1.1 million compared to fiscal 2015, primarily due to lower spending and grant recognition resulting from the deconsolidation of Kingstone.
Gain on Sale of Other Assets
For the year ended September 30, 2016, we recognized a gain of $2.6 million on the sale of our exclusive sale and service rights in the Kingstone solar ion implanter, compared to the $8.8 million gain on the 2015 Kingstone transaction and deconsolidation.
Income from Equity Method Investment
For the year ended September 30, 2016 we recognized investment income of $0.3 million related to our 15% equity investment in Kingstone Hong Kong.
Income Tax Provision
Our effective tax rate was negative 56.9% and negative 39.8% in fiscal 2016 and 2015, respectively. The effective tax rate is the ratio of total income tax expense (benefit) to pre-tax income (loss). The tax expense and the related negative effective tax rates were due primarily to taxes on gains related to the partial dispositions of our investment in Kingstone in 2016 and 2015 and the added valuation allowance on the remaining U.S. deferred tax assets in 2016. See Note 13 of the Notes to Consolidated Financial Statements included in this Annual Report. The valuation allowance on the remaining U.S. deferred tax assets was established in the current period when it was determined that, due to tax planning strategies, future taxable income in the U.S. on intercompany transactions will be reduced significantly. These transactions are eliminated in the consolidated financial statements. The effective tax rates in 2016 and 2015 were different than the 34% U.S. tax rate primarily due to the valuation allowance on net operating losses in The Netherlands, China and France and in 2016 the valuation on the remaining U.S. deferred tax assets.
The Financial Accounting Standards require that a valuation allowance be established when it is “more likely than not” that all or a portion of deferred tax assets will not be realized. A review of all available positive and negative evidence
34
needs to be considered, including a company's performance, the market environment in which the company operates and the length of carryback and carryforward periods. According to those standards, it is difficult to conclude that a valuation allowance is not needed when the negative evidence includes cumulative losses in recent years. Therefore, cumulative losses weigh heavily in the overall assessment. As a result of the review, where cumulative losses had been incurred, we have concluded in 2015 and 2016 that it was appropriate to maintain a full valuation allowance for substantially all net deferred tax assets in foreign jurisdictions and the carryforwards of U.S. net operating losses and foreign tax credits, which were acquired in the merger with BTU International. Through the end of third quarter of fiscal 2016, the existence of future taxable income on intercompany transactions caused us to believe that it is more likely than not the other United States deferred tax assets would be realized. However, tax planning strategies to reduce sources of future taxable income caused us to conclude in the fourth quarter of fiscal 2016 that a valuation allowance should be established on the remaining U.S. deferred tax assets.
Our future effective income tax rate depends on various factors, such as the amount of income (loss) in each tax jurisdiction, tax regulations governing each region, non-tax deductible expenses incurred as a percent of pre-tax income and the effectiveness of our tax planning strategies.
Fiscal 2015 compared to Fiscal 2014
Net Revenue
Net revenue consists of revenue recognized upon shipment or installation of equipment, with the exception of products using new technology, for which revenue is recognized upon customer acceptance. Spare parts sales are recognized upon shipment and service revenue is recognized upon completion of the service activity or ratably over the term of the service contract. Since the majority of our revenue is generated from large system sales, revenue and operating income can be significantly impacted by the timing of system shipments, and recognition of revenue based on customer acceptances. See Critical Accounting Policies – Revenue Recognition.
Years Ended September 30, | ||||||||||||||
Segment | 2015 | 2014 | Inc (Dec) | % | ||||||||||
(dollars in thousands) | ||||||||||||||
Solar | $ | 56,689 | $ | 36,069 | $ | 20,620 | 57 | % | ||||||
Semiconductor | 37,250 | 9,779 | 27,471 | 281 | % | |||||||||
Polishing | 10,944 | 10,653 | 291 | 3 | % | |||||||||
Total net revenue | $ | 104,883 | $ | 56,501 | $ | 48,382 | 86 | % | ||||||
Net revenue for the years ended September 30, 2015 and 2014 were $104.9 million and $56.5 million, respectively; an increase of $48.4 million or 86%. Revenue from the solar segment increased 57% due primarily to increased sales of our expanded portfolio of solar products, including our PECVD equipment, as well as our solar diffusion systems and related automation. Revenue from the semiconductor segment increased 281% due primarily to the acquisition of BTU in January 2015.
Revenues from the polishing supplies segment increased slightly due to increases in sales of polishing templates which are used in single-sided polishing processes. Sales of polishing templates have improved, due primarily to the increased demand for sapphire substrates used in LED lighting and mobile communication devices.
Backlog and Orders
Our backlog as of September 30, 2015 and 2014 was $34.6 million and $28.5 million, respectively. Our backlog as of September 30, 2015 included approximately $22.9 million of orders and deferred revenue from our solar industry customers compared to $22.8 million as of September 30, 2014. New orders booked in fiscal 2015 were $109.9 million ($61.2 million solar) compared to $61.3 million ($39.9 million solar) in fiscal 2014. As the majority of the backlog is denominated in Euros, the weakening of the Euro during fiscal 2015 resulted in a decrease in backlog of approximately $4.6 million. At the end of fiscal 2015, two customers individually accounted for 15% and 14% of our total backlog. At the end of fiscal 2014, two customers individually accounted for 31% and 13% of our total backlog.
35
The orders included in our backlog are generally credit approved customer purchase orders expected to ship within the next twelve months. Because our orders are typically subject to cancellation or delay by the customer, our backlog at any particular point in time is not necessarily representative of actual sales for subsequent periods, nor is backlog any assurance that we will realize revenue or profit from completing these orders. Our backlog also includes revenue deferred pursuant to our revenue recognition policy, derived from orders that have already been shipped but which have not met the criteria for revenue recognition.
Gross Profit and Gross Margin
Gross profit is the difference between net revenue and cost of goods sold. Cost of goods sold consists of purchased material, labor and overhead to manufacture equipment or spare parts and the cost of service and support to customers for warranty, installation and paid service calls. Gross margin is gross profit as a percent of net revenue.
Years Ended September 30, | ||||||||||||||
Segment | 2015 | 2014 | Inc (Dec) | % | ||||||||||
(dollars in thousands) | ||||||||||||||
Solar | $ | 11,639 | $ | 5,263 | $ | 6,376 | 121 | % | ||||||
Semiconductor | 11,442 | 1,949 | 9,493 | 487 | % | |||||||||
Polishing | 3,927 | 4,414 | (487 | ) | (11 | )% | ||||||||
Total gross profit | $ | 27,008 | $ | 11,626 | $ | 15,382 | 132 | % | ||||||
Gross profit for the years ended September 30, 2015 and 2014 was $27.0 million and $11.6 million respectively; an increase of $15.4 million or 132%. Gross margin for fiscal 2015 increased to 26% from 21% in fiscal 2014. Gross margin for the solar segment increased to 21% in fiscal 2015, compared to 15% in fiscal 2014 due primarily to higher sales volumes. In the semiconductor segment gross margin was 31% in fiscal 2015, compared to 20% in fiscal 2014 primarily due to the BTU acquisition. In fiscal 2015 and 2014, use of previously written down inventory had a $4.0 million favorable impact. In fiscal 2015, we had a net recognition of previously deferred profit of $1.3 million compared to a net deferral of $6.1 million in fiscal 2014. Gross margin from our polishing supplies segment was 36% and 41% in fiscal 2015 and 2014, respectively. Lower margins in this segment resulted primarily from product mix.
Selling, General and Administrative Expenses
Selling, general and administrative ("SG&A") expenses consist of the cost of employees, consultants and contractors, facility costs, sales commissions, shipping costs, promotional marketing expenses, legal and accounting expenses and bad debt expense.
Total SG&A expenses for the years ended September 30, 2015 and 2014 were $33.0 million and $18.4 million respectively. SG&A increased due, in part, to the acquisition of BTU. In addition to SG&A expenses incurred by BTU, expenses were higher due to activity leading up to our acquisitions of BTU and SoLayTec and restructuring of our investment in Kingstone, as well as increases from higher shipping and commission expenses resulting from higher sales in fiscal 2015, partially offset by lower bad debt expenses. SG&A expense included $1.2 million and $0.8 million of stock-based compensation expense for fiscal years 2015 and 2014, respectively.
Impairment and Restructuring Charges
Restructuring charges for the year ended September 30, 2015 were $0.6 million, related primarily to severance costs in connection with the BTU acquisition. There were no restructuring charges in fiscal 2014.
Research, Development and Engineering
Research, development and engineering ("RD&E") expenses consist of the cost of employees, consultants and contractors who design, engineer and develop new products and processes as well as materials and supplies used in producing prototypes. We receive reimbursements through governmental research and development grants which are netted against these expenses when certain conditions have been met.
36
Years Ended September 30, | ||||||||||||||
2015 | 2014 | Inc (Dec) | % | |||||||||||
(dollars in thousands) | ||||||||||||||
Research, development and engineering | $ | 13,214 | $ | 10,863 | $ | 2,351 | 22 | % | ||||||
Grants earned | (6,296 | ) | (4,572 | ) | (1,724 | ) | 38 | % | ||||||
Net research, development and engineering | $ | 6,918 | $ | 6,291 | $ | 627 | 10 | % | ||||||
RD&E expense, net of grants earned, for the fiscal year ended September 30, 2015 increased $0.6 million compared to fiscal 2014. Gross RD&E spending increased due primarily to the acquisition of BTU and SoLayTec. Increased RD&E spending was partially offset by increased recognition of grants earned. We receive reimbursements through governmental research and development grants which are netted against these expenses.
Income Tax Provision
Our effective tax rate was negative 39.8% and negative 9.5% in fiscal 2015 and 2014, respectively. The effective tax rate is the ratio of total income tax expense (benefit) to pre-tax income (loss). The negative effective tax rate in fiscal 2015 were due primarily to increasing the valuation allowance on the current period net operating loss and foreign withholding taxes associated with the partial sale of our investment in Kingstone. See Note 14 of the Notes to Consolidated Financial Statements included in this Annual Report. In 2014 the negative effective tax rate was due primarily to increasing the valuation allowance on the current period net operating losses and establishing an allowance on all deferred tax assets related to France in 2014. The increase in the valuation allowance was recorded due to cumulative losses in China, The Netherlands and France. The effective tax rates in 2015 and 2014 were different than the 34% U.S. tax rate primarily due to the valuation allowance on net operating losses in The Netherlands, China and France and the withholding taxes in 2015.
The Financial Accounting Standards require that a valuation allowance be established when it is “more likely than not” that all or a portion of deferred tax assets will not be realized. A review of all available positive and negative evidence needs to be considered, including a company's performance, the market environment in which the company operates and the length of carryback and carryforward periods. According to those standards, it is difficult to conclude that a valuation allowance is not needed when the negative evidence includes cumulative losses in recent years. Therefore, cumulative losses weigh heavily in the overall assessment. As a result of the review, where cumulative losses had been incurred, we concluded that it was appropriate to establish a full valuation allowance for net deferred tax assets in the Netherlands, France and China. Available tax planning strategies cause us to believe that it is more likely than not that the deferred tax assets related to the United States tax jurisdiction will be realized despite cumulative losses there.
Our future effective income tax rate depends on various factors, such as the amount of income (loss) in each tax jurisdiction, tax regulations governing each region, non-tax deductible expenses incurred as a percent of pre-tax income and the effectiveness of our tax planning strategies.
Liquidity and Capital Resources
As of September 30, 2016 and 2015, cash and cash equivalents were $27.7 million and $25.9 million, respectively. As of September 30, 2016 and 2015, cash and cash equivalents held by our foreign subsidiaries was $8.3 million and $9.6 million, respectively. As of September 30, 2016 and 2015, restricted cash was $0.9 million and $0.6 million, respectively. Restricted cash increased due to an increase in customer deposits requiring bank guarantees collateralized by cash. Our working capital was $44.9 million as of September 30, 2016 and $46.3 million as of September 30, 2015. The increase in cash during fiscal 2016 of $1.8 million was primarily due to proceeds received from the partial sale of our equity interest in Kingstone of $7.0 million and the sale of the related sale and service rights for $4.9 million, along with borrowings on long-term debt of $1.1 million. These increases were partially offset by cash used in operating activities of $9.8 million and capital expenditures of $1.0 million. We maintain a portion of our cash and cash equivalents in Euros at our Dutch and French operations; therefore, changes in the exchange rate have an impact on our cash balances.
See information below regarding payments expected as a result of contractual obligations. We have never paid dividends on our common stock. Our present policy is to apply cash to investments in product development, acquisitions or expansion; consequently, we do not expect to pay dividends on common stock in the foreseeable future. We believe
37
that our current cash and other sources of liquidity discussed below are adequate to support operations for at least the next 12 months.
The success of our growth strategy is dependent upon the availability of additional capital resources on terms satisfactory to management. Our sources of capital in the past have included the sale of equity securities, which include common and preferred stock sold in private transactions and public offerings, capital leases and long-term debt. There can be no assurance that we can raise such additional capital resources on satisfactory terms. We believe that our principal sources of liquidity discussed above are sufficient to support operations for the next twelve months.
Fiscal Years Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Net cash used in operating activities | $ | (9,689 | ) | $ | (10,067 | ) | $ | (11,081 | ) | ||
Net cash provided by (used in) investing activities | $ | 11,173 | $ | 8,281 | $ | (462 | ) | ||||
Net cash provided by financing activities | $ | 457 | $ | 805 | $ | 1,481 | |||||
Cash Flows from Operating Activities
Cash used in operating activities was $9.7 million, $10.1 million, and $11.1 million in fiscal years 2016, 2015, and 2014 respectively. During fiscal 2016, 2015 and 2014, cash declined due to losses from operations, adjusted for non-cash charges. In fiscal 2016, cash was reduced by an increase in accounts receivable and payments of accrued liabilities, offset by income taxes and other accrued liabilities. In fiscal 2015, cash was used to make tax payments of $5.1 million and through increases in inventory and other working capital, partially offset by increases in accounts payable and customer deposits. In fiscal 2014, significant uses of cash included increases in accounts receivable and decreases in customer deposits and other liabilities, partially offset by sources such as tax refunds and increases in deferred profit.
Cash Flows from Investing Activities
Investing activities in fiscal 2016 provided cash of $7.0 million from the partial sale of our equity interest in Kingstone and $4.9 million from the sale of the related sale and service rights. Investing activities in fiscal 2015 provided cash of $8.3 million due to $8.2 million of net cash acquired in the acquisition of BTU and SoLayTec and $0.7 million of proceeds from the sale of a portion of our investment in Kingstone. Investing activities in fiscal 2016, 2015 and 2014 included capital expenditures of $1.0 million, $0.6 million and $0.5 million respectively.
Cash Flows from Financing Activities
In fiscal 2016, the primary source of $0.5 million of cash provided by financing activities was comprised of borrowings of long-term debt of $1.1 million, net of payments of $0.7 million. In fiscal 2015, cash provided by financing activities was $0.8 million, consisting primarily of net borrowings on long-term obligations and net proceeds from the exercise of stock options. In fiscal 2014, cash provided by financing activities was $1.5 million, consisting primarily of proceeds from employee exercises of stock options and the related tax benefits.
Off-Balance Sheet Arrangements
As of September 30, 2016, we had no off-balance sheet arrangements as defined in Item 303(a)(4) of Regulation S-K promulgated by the Securities and Exchange Commission.
Contractual Obligations and Commercial Commitments
We had the following contractual obligations and commercial commitments as of September 30, 2016:
38
Contractual obligations | Total | Less than 1 year | 1-3 years | 3-5 years | More than 5 years | |||||||||||||||
(dollars in thousands) | ||||||||||||||||||||
Debt obligations | $ | 10,231 | $ | 1,134 | $ | 1,997 | $ | 747 | $ | 6,353 | ||||||||||
Operating lease obligations: | ||||||||||||||||||||
Buildings | 2,049 | 999 | 756 | 294 | $ | — | ||||||||||||||
Office equipment | 146 | 62 | 78 | 6 | — | |||||||||||||||
Vehicles | 401 | 192 | 201 | 8 | — | |||||||||||||||
Total operating lease obligations | 2,596 | 1,253 | 1,035 | 308 | — | |||||||||||||||
Purchase obligations | 11,258 | 11,255 | 3 | — | — | |||||||||||||||
Total | $ | 24,085 | $ | 13,642 | $ | 3,035 | $ | 1,055 | $ | 6,353 | ||||||||||
Other commercial obligations: | ||||||||||||||||||||
Bank guarantees | $ | 643 | $ | 643 | $ | — | — | — | ||||||||||||
Critical Accounting Policies
“Management’s Discussion and Analysis of Financial Condition and Results of Operations” discusses our consolidated financial statements that have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these consolidated financial statements requires us to make estimates and assumptions that affect the reported amount of assets and liabilities at the date of the consolidated financial statements, the disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenue and expenses during the reporting period.
On an on-going basis, we evaluate our estimates and judgments, including those related to revenue recognition, inventory valuation and inventory purchase commitments, accounts receivable collectability, warranty and impairment of long-lived assets. We base our estimates and judgments on historical experience, expectations regarding the future and on various other factors that we believe to be reasonable under the circumstances. The results of these estimates and judgments form the basis for making conclusions about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.
A critical accounting policy is one that is both important to the presentation of our financial position and results of operations, and requires management’s most difficult, subjective or complex judgments, often as a result of the need to make estimates about the effect of matters that are inherently uncertain. These uncertainties are discussed in “ITEM 1A. RISK FACTORS.” We believe the following critical accounting policies affect the more significant judgments and estimates used in the preparation of our consolidated financial statements.
Revenue Recognition - We review product and service sales contracts with multiple deliverables to determine if separate units of accounting are present. Where separate units of accounting exist, revenue allocated to delivered items is the lower of the relative selling price of the delivered items in the sales arrangement or the portion of the selling price that is not contingent upon performance of the service.
We recognize revenue when persuasive evidence of an arrangement exists; the product has been delivered and title has transferred, or services have been rendered; and the seller’s price to the buyer is fixed or determinable and collectability is reasonably assured. For us, this policy generally results in revenue recognition at the following points:
1. | For our equipment business, transactions where legal title passes to the customer upon shipment, we recognize revenue upon shipment for those products where the customer’s defined specifications have been met with at least two similarly configured systems and processes for a comparably situated customer. Our selling prices may include both equipment and services, i.e., installation and start-up services performed by our service technicians. The equipment and services are multiple deliverables. Certain equipment that has a positive track record of successful installation and customer acceptance are considered to be routine systems. Our recognition of revenue upon delivery of such equipment that has been routinely installed and accepted is equal to the total selling price minus the relative selling price of the undelivered services. |
39
Where the installation and acceptance of more than two similarly configured items of equipment have not become routine, recognition of revenue upon delivery of equipment is limited to the lesser of (i) the total selling price minus the relative selling price of the undelivered services or (ii) the non-contingent amount. Since we defer only those costs directly related to installation, or other unit of accounting not yet delivered, and the portion of the contract price is often considerably greater than the relative selling price of those items, our policy at times will result in deferral of profit that is disproportionate in relation to the deferred revenue. When this is the case, the gross margin recognized in one period will be lower and the gross margin reported in a subsequent period will improve.
2. | For products where the customer’s defined specifications have not been met with at least two similarly configured systems and processes, the revenue and directly related costs are deferred at the time of shipment and later recognized at the time of customer acceptance or when this criterion has been met. We have, on occasion, experienced longer than expected delays in receiving cash from certain customers pending final installation or system acceptance. If some of our customers refuse to pay the final payment, or otherwise delay final acceptance or installation, the deferred revenue would not be recognized, adversely affecting our future cash flows and operating results. |
3. | Sales of certain equipment, spare parts and consumables are recognized upon shipment, as there are no post shipment obligations other than standard warranties. |
4. | Service revenue is recognized upon performance of the services requested by the customer. Revenue related to service contracts is recognized ratably over the period of the contract or in accordance with the terms of the contract, which generally coincides with the performance of the services requested by the customer. |
Income Taxes. The calculation of tax liabilities involves significant judgment in identifying uncertain tax positions and estimating the amount of deferred tax assets that will be realized in the future and the impact of uncertainties in the application of complex tax laws. Resolution of these uncertainties in a manner inconsistent with our expectations could have a material impact on our operations and financial condition.
We are required to apply a more likely than not threshold to the recognition and derecognition of uncertain tax positions and in determining whether certain tax benefits will be realized in the future. We are required to recognize the amount of tax benefit that has a greater than 50 percent likelihood of being ultimately realized upon settlement. It further requires that a change in judgment related to the expected ultimate resolution of uncertain tax positions be recognized in earnings in the period of such change.
In fiscal 2016, 2015 and 2014, judgment was also exercised in determining the amount of income taxes to recognize in those years in connection with the reorganization of our Netherlands operations and the related tax on those transfers. In fiscal 2015, judgment was necessary in the proper application of the tax regulations of foreign jurisdictions in conjunction with the partial sale of our investment in Kingstone.
Inventory Valuation and Inventory Purchase Commitments. We value our inventory at the lower of cost or net realizable value. Costs for approximately 50% of inventory are determined on an average cost basis with the remainder determined on a first-in, first-out (FIFO) basis. We regularly review inventory quantities and record a write-down to net realizable value for excess and obsolete inventory. The write-down is primarily based on historical inventory usage adjusted for expected changes in product demand and production requirements. Our industry is characterized by customers in highly cyclical industries, rapid technological changes, frequent new product developments and rapid product obsolescence. Changes in demand for our products and product mix could result in further write-downs.
We must order components for our products and build inventory in advance of product shipments through issuance of purchase orders based on projected demand. These commitments typically cover our requirements for periods ranging from 30 to 180 days or longer when there is a significant increase in demand or lead-times from suppliers. These purchase commitments may result in accepting delivery of components not needed to meet current demand. We accrue for estimated cancellation fees related to component orders that have been cancelled or are expected to be cancelled, and for excess inventories that will likely result in our taking delivery of ordered inventory items in excess of our projected needs. If there is an abrupt and substantial decline in demand for one or more of our products, an unanticipated change in technological requirements for any of our products, or a change in our suppliers' practice of not enforcing
40
purchase commitments, we may be required to record additional charges for these items. This would negatively impact gross margin in the period when the charges are recorded.
Allowance for Doubtful Accounts. We maintain an allowance for doubtful accounts for estimated losses resulting from the inability or unwillingness of our customers to make required payments. This allowance is based on historical experience, credit evaluations, specific customer collection history and any customer-specific issues we have identified. Since a significant portion of our revenue is derived from the sale of high-value systems, our accounts receivable are often concentrated in a relatively few number of customers. A significant change in the liquidity or financial position of any one of these customers could have a material adverse impact on the collectability of our accounts receivable and our future operating results.
Warranty. We provide a limited warranty, generally for 12 to 24 months, to our customers. A provision for the estimated cost of providing warranty coverage is recorded upon acceptance of all systems. On occasion, we have been required and may be required in the future to provide additional warranty coverage to ensure that the systems are ultimately accepted or to maintain customer goodwill. While our warranty costs have historically been within our expectations and we believe that the amounts accrued for warranty expenditures are sufficient for all systems sold through September 30, 2016, we cannot guarantee that we will continue to experience a similar level of predictability with regard to warranty costs. In addition, technological changes or previously unknown defects in raw materials or components may result in more extensive and frequent warranty service than anticipated, which could result in an increase in our warranty expense.
Long-lived Assets. We periodically evaluate whether events and circumstances have occurred that indicate the estimated useful lives of long-lived assets or intangible assets may warrant revision or that the remaining balance may not be recoverable. Factors that we consider in deciding when to perform an impairment review include significant under-performance of a business or product line in relation to expectations, significant negative industry or economic trends, and significant changes or planned changes in our use of the assets. In accordance with ASC 360-Property, Plant, and Equipment, we measure the recoverability of assets that we will continue to use in our operations by comparing the carrying value of the asset grouping to our estimate of the related total future undiscounted net cash flows. If an asset grouping’s carrying value is not recoverable through the related undiscounted cash flows, the asset grouping is considered to be impaired. We measure the impairment by comparing the difference between the asset grouping’s carrying value and its fair value. The long-lived assets are considered a non-financial asset and are recorded at fair value only if an impairment charge is recognized.
Indefinite Lived Assets and Goodwill. We perform an annual impairment test in the fourth quarter of each year, or more frequently if indicators of potential impairment exist, to determine whether the fair value of a reporting unit in which goodwill resides is less than its carrying value. In accordance with ASC 350-Intangibles-Goodwill and Other, we perform the first step of the goodwill impairment test, which compares the fair value of the reporting unit to its carrying value. If the fair value of the reporting unit exceeds the carrying value of the net assets assigned to that unit, goodwill is not considered impaired and we are not required to perform additional analysis. If the carrying value of the net assets assigned to the reporting unit exceeds the fair value of the reporting unit, we must then perform the second step of the goodwill impairment test to determine the implied fair value of the reporting unit’s goodwill. If we determine during the second step that the carrying value of a reporting unit’s goodwill exceeds its implied fair value, we record an impairment loss equal to the difference.
Determining the fair value of a reporting unit involves the use of significant estimates and assumptions. Our goodwill impairment test uses a weighting of the income approach and the market approach to estimate a reporting unit’s fair value. The income approach is based on a discounted future cash flow analysis that uses certain assumptions including: projections of revenues and expenses and related cash flows based on assumed long-term growth rates and demand trends; expected future investments and working capital requirements to sustain and grow the business; and estimated discount rates based on the reporting unit’s weighted average cost of capital as derived by the Capital Asset Pricing Model (CAPM) and other methods, which includes observable market inputs and other data from identified comparable companies. The same estimates are also used internally for our capital budgeting process, and for long-term and short-term business planning and forecasting. We test the reasonableness of the inputs and outcomes of our discounted cash flow analysis against available comparable market data.
The market approach is based on the application of appropriate market-derived multiples selected from (a) comparable publicly-traded companies and/or (b) the implied transaction multiples derived from identified merger and acquisition activity in the market. Multiples are then selected based on a comparison of the reviewed data to that of the reporting unit and applied to relevant historical and forecasted financial parameters such as levels of revenues, EBITDA, EBIT or other metrics.
41
Stock-Based Compensation. The Company measures compensation costs relating to share-based payment transactions based upon the grant-date fair value of the award. Those costs are recognized as expense over the requisite service period, which is generally the vesting period. The benefits of tax deductions in excess of recognized compensation cost are reported as cash flow from financing activities rather than as cash flow from operating activities.
Impact of Recently Issued Accounting Pronouncements
For discussion of the impact of recently issued accounting pronouncements, see “Item 8: Financial Statements and Supplementary Data” under Footnote 1 “Summary of Significant Accounting Policies” under “Impact of Recently Issued Accounting Pronouncements”.
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
We are exposed to foreign currency exchange rates to the extent sales contracts, purchase contracts, assets or liabilities of our operations are denominated in currencies other than their functional currency. Our operations in the United States are generally conducted in their functional currency, the U.S. dollar. Our operations in Europe, China and other countries are primarily conducted in their functional currencies, the Euro, Renminbi, or the local country currency, respectively, and we occasionally enter into transactions in non-functional currencies. The sales of our China operations are generally in U.S. dollars. It is highly uncertain how currency exchange rates will fluctuate in the future. Actual changes in foreign exchange rates could adversely affect our operating results or financial condition.
During fiscal 2016 and in 2015, we did not hold any stand-alone or separate derivative instruments. At any point in time, our foreign subsidiaries have cash, receivables and payables denominated in U.S. dollars, rather than their local functional currency. A change in the value of the U.S. dollar relative to those subsidiaries' functional currency would result in a foreign currency transaction gain or loss. We incurred foreign currency transaction losses of less than $0.1 million in fiscal 2016 and a foreign currency transaction gain of $0.3 million in fiscal 2015.
Our net investment in and long-term advances to our foreign operations totaled $18.8 million as of September 30, 2016. A 10% change in the value of the foreign currencies relative to the U.S. dollar would cause approximately $1.9 million of other comprehensive income (loss), which is a direct adjustment to stockholders' equity.
As of September 30, 2016 sales commitments denominated in a currency other than the functional currency of our transacting operation totaled approximately $0.6 million. Our lead-times to fulfill these commitments generally range between 13 and 26 weeks. A 10% change in the relevant exchange rates between the time the order was taken and the time of shipment would not cause our gross profit on such orders to be significantly greater or less than expected on the date the order was taken.
As of September 30, 2016, purchase commitments denominated in a currency other than the functional currency of our transacting operation totaled $0.7 million. A 10% change in the relevant exchange rates between the time the purchase order was placed and the time the order is received would not cause our cost of such items to be significantly greater or less than expected on the date the purchase order was placed.
42
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
The following documents are filed as part of this Annual Report on Form 10-K:
Financial Statements | |
43
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors and
Stockholders of
AMTECH SYSTEMS, INC.
We have audited the accompanying consolidated balance sheets of Amtech Systems, Inc. and Subsidiaries as of September 30, 2016 and 2015, and the related consolidated statements of operations, comprehensive income (loss), stockholders' equity, and cash flows for each of the three years in the period ended September 30, 2016. These consolidated financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall consolidated financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Amtech Systems, Inc. and Subsidiaries as of September 30, 2016 and 2015, and the results of their operations and their cash flows for each of the three years in the period ended September 30, 2016, in conformity with accounting principles generally accepted in the United States of America.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the effectiveness of Amtech Systems, Inc. and Subsidiaries’ internal control over financial reporting as of September 30, 2016, based on criteria established in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated December 1, 2016, expressed an unqualified opinion.
/s/ MAYER HOFFMAN MCCANN P.C. | |
Phoenix, Arizona | |
November 30, 2016 | |
44
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the Board of Directors and
Stockholders of
AMTECH SYSTEMS, INC.
We have audited Amtech Systems, Inc. and Subsidiaries’ (the “Company”) internal control over financial reporting as of September 30, 2016 based on criteria established in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
In our opinion, Amtech Systems, Inc. and Subsidiaries maintained, in all material respects, effective internal control over financial reporting as of September 30, 2016, based on criteria established in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets and the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows of the Company, and our report dated December 1, 2016, expressed an unqualified opinion.
/s/ MAYER HOFFMAN MCCANN P.C. | |
Phoenix, Arizona | |
November 30, 2016 | |
45
PART I FINANCIAL INFORMATION
ITEM 1. Consolidated Financial Statements
AMTECH SYSTEMS, INC. AND SUBSIDIARIES
Consolidated Balance Sheets
(in thousands except share data)
Assets | September 30, 2016 | September 30, 2015 | ||||||
Current Assets | ||||||||
Cash and cash equivalents | $ | 27,655 | $ | 25,852 | ||||
Restricted cash | 893 | 638 | ||||||
Accounts receivable | ||||||||
Trade (less allowance for doubtful accounts of $3,730 and $5,009 at | 17,642 | 14,488 | ||||||
September 30, 2016 and September 30, 2015, respectively) | ||||||||
Unbilled and other | 8,634 | 8,494 | ||||||
Inventories | 23,223 | 23,329 | ||||||
Deferred income taxes | — | 2,050 | ||||||
Refundable income taxes | 260 | — | ||||||
Notes and other receivable | — | 7,079 | ||||||
Other | 4,617 | 3,772 | ||||||
Total current assets | 82,924 | 85,702 | ||||||
Property, Plant and Equipment - Net | 15,960 | 17,761 | ||||||
Deferred income taxes - Long Term | 200 | 430 | ||||||
Other Assets - Long Term | 1,095 | 3,356 | ||||||
Investments | 3,032 | 2,733 | ||||||
Intangible Assets - Net | 4,100 | 4,939 | ||||||
Goodwill - Net | 11,119 | 10,535 | ||||||
Total Assets | $ | 118,430 | $ | 125,456 | ||||
Liabilities and Stockholders' Equity | ||||||||
Current Liabilities | ||||||||
Accounts payable | $ | 15,397 | $ | 15,646 | ||||
Current maturities of long-term debt | 1,134 | 919 | ||||||
Accrued compensation and related taxes | 5,710 | 5,605 | ||||||
Accrued warranty expense | 795 | 793 | ||||||
Deferred profit | 4,709 | 4,873 | ||||||
Customer deposits | 7,055 | 7,154 | ||||||
Other accrued liabilities | 2,164 | 3,551 | ||||||
Income taxes payable | 1,100 | 830 | ||||||
Total current liabilities | 38,064 | 39,371 | ||||||
Long-term debt | 9,097 | 8,448 | ||||||
Income Taxes Payable Long-term | 5,930 | 4,990 | ||||||
Total Liabilities | 53,091 | 52,809 | ||||||
Commitments and Contingencies | ||||||||
Stockholders' Equity | ||||||||
Preferred stock; 100,000,000 shares authorized; none issued | — | — | ||||||
Common stock; $0.01 par value; 100,000,000 shares authorized; shares issued and outstanding: 13,179,355 and 13,150,469 at September 30, 2016 and September 30, 2015, respectively | 132 | 131 | ||||||
Additional paid-in capital | 111,631 | 110,191 | ||||||
Accumulated other comprehensive loss | (8,876 | ) | (8,666 | ) | ||||
Retained deficit | (35,830 | ) | (28,822 | ) | ||||
Total Stockholders' Equity | 67,057 | 72,834 | ||||||
Noncontrolling interest | (1,718 | ) | (187 | ) | ||||
Total Equity | 65,339 | 72,647 | ||||||
Total Liabilities and Stockholders' Equity | $ | 118,430 | $ | 125,456 | ||||
The accompanying notes are an integral part of these consolidated financial statements.
46
AMTECH SYSTEMS, INC. AND SUBSIDIARIES
Consolidated Statements Of Operations
(in thousands, except per share data)
Years Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
Revenue, net of returns and allowances | $ | 120,308 | $ | 104,883 | $ | 56,501 | |||||
Cost of sales | 86,245 | 77,875 | 44,875 | ||||||||
Gross profit | 34,063 | 27,008 | 11,626 | ||||||||
Selling, general and administrative | 33,967 | 33,028 | 18,424 | ||||||||
Research, development and engineering | 8,004 | 6,918 | 6,291 | ||||||||
Restructuring charges | — | 583 | — | ||||||||
Operating loss | (7,908 | ) | (13,521 | ) | (13,089 | ) | |||||
Gain on deconsolidation of Kingstone | — | 8,814 | — | ||||||||
Gain on sale of other assets | 2,576 | — | — | ||||||||
Income from equity method investment | 299 | — | — | ||||||||
Interest and other (expense) income, net | (417 | ) | (100 | ) | 40 | ||||||
Loss before income taxes | (5,450 | ) | (4,807 | ) | (13,049 | ) | |||||
Income tax provision | 3,100 | 1,910 | 1,240 | ||||||||
Net loss | (8,550 | ) | (6,717 | ) | (14,289 | ) | |||||
Add: Net (income) loss attributable to noncontrolling interest | 1,542 | (1,054 | ) | 1,242 | |||||||
Net loss attributable to Amtech Systems, Inc. | $ | (7,008 | ) | $ | (7,771 | ) | $ | (13,047 | ) | ||
Loss Per Share: | |||||||||||
Basic loss per share attributable to Amtech shareholders | $ | (0.53 | ) | $ | (0.65 | ) | $ | (1.34 | ) | ||
Weighted average shares outstanding | 13,168 | 12,022 | 9,732 | ||||||||
Diluted loss per share attributable to Amtech shareholders | $ | (0.53 | ) | $ | (0.65 | ) | $ | (1.34 | ) | ||
Weighted average shares outstanding | 13,168 | 12,022 | 9,732 | ||||||||
The accompanying notes are an integral part of these consolidated financial statements.
47
AMTECH SYSTEMS, INC. AND SUBSIDIARIES
Consolidated Statements Of Comprehensive Income (Loss)
(in thousands)
Years Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
Net loss | $ | (8,550 | ) | $ | (6,717 | ) | $ | (14,289 | ) | ||
Foreign currency translation adjustment | (199 | ) | (3,010 | ) | (1,202 | ) | |||||
Comprehensive loss | (8,749 | ) | (9,727 | ) | (15,491 | ) | |||||
Comprehensive (income) loss attributable to noncontrolling interest | 1,531 | (920 | ) | 1,210 | |||||||
Comprehensive loss attributable to Amtech Systems, Inc. | $ | (7,218 | ) | $ | (10,647 | ) | $ | (14,281 | ) | ||
The accompanying notes are an integral part of these consolidated financial statements.
48
AMTECH SYSTEMS, INC. AND SUBSIDIARIES
Consolidated Statements Of Stockholders' Equity
(in thousands)
Common Stock | Accumulated Other Comprehensive Income (Loss) | Retained Earnings | Total Stockholders' Equity | Non-controlling Interest | Total Equity | |||||||||||||||||||||||||
Number of Shares | Amount | Additional Paid- In Capital | ||||||||||||||||||||||||||||
Balance at | ||||||||||||||||||||||||||||||
September 30, 2013 | 9,551 | $ | 96 | $ | 79,610 | $ | (4,556 | ) | $ | (8,004 | ) | $ | 67,146 | $ | (343 | ) | $ | 66,803 | ||||||||||||
Net loss | — | — | — | — | (13,047 | ) | (13,047 | ) | (1,242 | ) | (14,289 | ) | ||||||||||||||||||
Translation adjustment | — | — | — | (1,234 | ) | — | (1,234 | ) | 32 | (1,202 | ) | |||||||||||||||||||
Tax benefit of stock compensation | — | — | 345 | — | — | 345 | — | 345 | ||||||||||||||||||||||
Stock compensation expense | — | — | 795 | — | — | 795 | — | 795 | ||||||||||||||||||||||
Restricted shares released | 34 | — | — | — | — | — | — | — | ||||||||||||||||||||||
Stock options exercised | 263 | 2 | 1,134 | — | — | 1,136 | — | 1,136 | ||||||||||||||||||||||
Balance at | ||||||||||||||||||||||||||||||
September 30, 2014 | 9,848 | $ | 98 | $ | 81,884 | $ | (5,790 | ) | $ | (21,051 | ) | $ | 55,141 | $ | (1,553 | ) | $ | 53,588 | ||||||||||||
Net loss | — | — | — | — | (7,771 | ) | (7,771 | ) | 1,054 | (6,717 | ) | |||||||||||||||||||
Translation adjustment | — | — | — | (2,876 | ) | — | (2,876 | ) | (134 | ) | (3,010 | ) | ||||||||||||||||||
Acquisition of interest in SoLayTec | — | — | — | — | — | — | 1,221 | 1,221 | ||||||||||||||||||||||
Deconsolidation of Kingstone | — | — | — | — | — | — | (775 | ) | (775 | ) | ||||||||||||||||||||
Tax benefit of stock compensation | — | — | 30 | — | — | 30 | — | 30 | ||||||||||||||||||||||
Stock compensation expense | — | — | 1,162 | — | — | 1,162 | — | 1,162 | ||||||||||||||||||||||
Shares issued for BTU purchase | 3,186 | 32 | 26,593 | — | 26,625 | — | 26,625 | |||||||||||||||||||||||
Restricted shares released | 22 | — | — | — | — | — | — | — | ||||||||||||||||||||||
Stock options exercised | 94 | 1 | 522 | — | — | 523 | — | 523 | ||||||||||||||||||||||
Balance at | ||||||||||||||||||||||||||||||
September 30, 2015 | 13,150 | $ | 131 | $ | 110,191 | $ | (8,666 | ) | $ | (28,822 | ) | $ | 72,834 | $ | (187 | ) | $ | 72,647 | ||||||||||||
Net loss | — | — | — | — | (7,008 | ) | (7,008 | ) | (1,542 | ) | (8,550 | ) | ||||||||||||||||||
Translation adjustment | — | — | — | (210 | ) | — | (210 | ) | 11 | (199 | ) | |||||||||||||||||||
Stock compensation expense | — | — | 1,390 | — | — | 1,390 | — | 1,390 | ||||||||||||||||||||||
Restricted shares released | 14 | — | — | — | — | — | — | — | ||||||||||||||||||||||
Stock options exercised | 15 | 1 | 50 | — | — | 51 | — | 51 | ||||||||||||||||||||||
Balance at | ||||||||||||||||||||||||||||||
September 30, 2016 | 13,179 | $ | 132 | $ | 111,631 | $ | (8,876 | ) | $ | (35,830 | ) | $ | 67,057 | $ | (1,718 | ) | $ | 65,339 | ||||||||||||
The accompanying notes are an integral part of these consolidated financial statements.
49
AMTECH SYSTEMS, INC. AND SUBSIDIARIES
Consolidated Statements Of Cash Flows
(in thousands)
Year Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
Operating Activities | |||||||||||
Net loss | $ | (8,550 | ) | $ | (6,717 | ) | $ | (14,289 | ) | ||
Adjustments to reconcile net loss to net cash used in operating activities: | |||||||||||
Depreciation and amortization | 2,974 | 3,357 | 2,410 | ||||||||
Write-down of inventory | 84 | 138 | 294 | ||||||||
Capitalized interest | 322 | — | — | ||||||||
Provision for (reversal of) allowance for doubtful accounts | 1,698 | (194 | ) | 1,304 | |||||||
Deferred income taxes | 2,280 | 454 | 194 | ||||||||
Non-cash share based compensation expense | 1,390 | 1,162 | 795 | ||||||||
Gain on deconsolidation of subsidiary | — | (8,814 | ) | — | |||||||
Gain on sale of fixed assets | (60 | ) | — | — | |||||||
Gain on sale of other assets | (2,576 | ) | — | — | |||||||
Income from equity method investment | (299 | ) | — | — | |||||||
Changes in operating assets and liabilities: | |||||||||||
Restricted cash | (253 | ) | (1,731 | ) | 2,662 | ||||||
Accounts receivable | (4,998 | ) | 1,700 | (11,786 | ) | ||||||
Inventories | 491 | (1,308 | ) | 3,636 | |||||||
Accrued income taxes | 351 | (4,329 | ) | 6,849 | |||||||
Other assets | (814 | ) | 2,119 | 782 | |||||||
Accounts payable | (224 | ) | 939 | 766 | |||||||
Accrued liabilities and customer deposits | (1,355 | ) | 4,647 | (10,805 | ) | ||||||
Deferred profit | (150 | ) | (1,490 | ) | 6,107 | ||||||
Net cash used in operating activities | (9,689 | ) | (10,067 | ) | (11,081 | ) | |||||
Investing Activities | |||||||||||
Purchases of property, plant and equipment | (978 | ) | (610 | ) | (462 | ) | |||||
Investment in acquisitions, net of cash | — | 8,191 | — | ||||||||
Proceeds from sale of property, plant and equipment | 255 | — | — | ||||||||
Proceeds from partial sale of subsidiary | 7,012 | 700 | — | ||||||||
Proceeds from the sale of other assets | 4,884 | — | — | ||||||||
Net cash provided by (used in) investing activities | 11,173 | 8,281 | (462 | ) | |||||||
Financing Activities | |||||||||||
Proceeds from issuance of common stock, net | 51 | 523 | 1,136 | ||||||||
Payments on long-term obligations | (739 | ) | (482 | ) | — | ||||||
Borrowings on long term debt | 1,145 | 734 | — | ||||||||
Excess tax benefit of stock compensation | — | 30 | 345 | ||||||||
Net cash provided by financing activities | 457 | 805 | 1,481 | ||||||||
Effect of Exchange Rate Changes on Cash | (138 | ) | (534 | ) | 232 | ||||||
Net Increase (Decrease) in Cash and Cash Equivalents | 1,803 | (1,515 | ) | (9,830 | ) | ||||||
Cash and Cash Equivalents, Beginning of Year | 25,852 | 27,367 | 37,197 | ||||||||
Cash and Cash Equivalents, End of Year | $ | 27,655 | $ | 25,852 | $ | 27,367 | |||||
Supplemental Cash Flow Information: | |||||||||||
Income tax refunds (payments), net | $ | (116 | ) | $ | (5,104 | ) | $ | 6,290 | |||
Issuance of common stock for acquisitions | — | 26,625 | — | ||||||||
Interest paid, net of capitalized interest | 305 | 440 | — | ||||||||
Supplemental Non-cash Financing Activities: | |||||||||||
Transfer inventory to property, plant, and equipment | $ | — | $ | — | $ | 527 | |||||
Transfer of property, plant, and equipment to inventory | 526 | — | — | ||||||||
The accompanying notes are an integral part of these consolidated financial statements.
50
Notes to Consolidated Financial Statements
For the Years Ended September 30, 2016, 2015 and 2014
1. Summary of Significant Accounting Policies
Nature of Operations and Basis of Presentation – Amtech Systems, Inc. (the “Company”) is a global manufacturer of capital equipment, including thermal processing, silicon wafer handling automation, and related consumables used in fabricating solar cells, LED and semiconductor devices. The Company sells these products to solar cell and semiconductor manufacturers worldwide, particularly in Asia, United States and Europe.
The Company serves niche markets in industries that are experiencing rapid technological advances and which historically have been very cyclical. Therefore, future profitability and growth depend on the Company’s ability to develop or acquire and market profitable new products and on its ability to adapt to cyclical trends.
Principles of Consolidation – The consolidated financial statements include the accounts of the Company and its wholly owned subsidiaries and subsidiaries in which it has a controlling interest. The Company reports noncontrolling interests in consolidated entities as a component of equity separate from the Company’s equity. The equity method of accounting is used for investments over which the Company has a significant influence but not a controlling financial interest. All material intercompany accounts and transactions have been eliminated in consolidation.
Use of Estimates – The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenue and expenses during the reporting period. Actual results could differ from those estimates.
Revenue Recognition – We review product and service sales contracts with multiple deliverables to determine if separate units of accounting are present. Where separate units of accounting exist, revenue allocated to delivered items is the lower of the relative selling price of the delivered items in the sales arrangement or the portion of the selling price that is not contingent upon performance of the service.
We recognize revenue when persuasive evidence of an arrangement exists; the product has been delivered and title has transferred, or services have been rendered; and the seller’s price to the buyer is fixed or determinable and collectability is reasonably assured. For us, this policy generally results in revenue recognition at the following points:
1. | For our equipment business, transactions where legal title passes to the customer upon shipment, we recognize revenue upon shipment for those products where the customer’s defined specifications have been met with at least two similarly configured systems and processes for a comparably situated customer. Our selling prices may include both equipment and services, i.e., installation and start-up services performed by our service technicians. The equipment and services are multiple deliverables. Certain equipment that has a positive track record of successful installation and customer acceptance are considered to be routine systems. Our recognition of revenue upon delivery of such equipment that has been routinely installed and accepted is equal to the total selling price minus the relative selling price of the undelivered services. |
Where the installation and acceptance of more than two similarly configured items of equipment have not become routine, recognition of revenue upon delivery of equipment is limited to the lesser of (i) the total selling price minus the relative selling price of the undelivered services or (ii) the non-contingent amount. Since we defer only those costs directly related to installation, or other unit of accounting not yet delivered, and the portion of the contract price is often considerably greater than the relative selling price of those items, our policy at times will result in deferral of profit that is disproportionate in relation to the deferred revenue. When this is the case, the gross margin recognized in one period will be lower and the gross margin reported in a subsequent period will improve.
2. | For products where the customer’s defined specifications have not been met with at least two similarly configured systems and processes, the revenue and directly related costs are deferred at the time of shipment and later recognized at the time of customer acceptance or when this criterion has been met. We have, on occasion, experienced longer than expected delays in receiving cash from certain customers pending final installation or system acceptance. If some of our customers refuse to pay the final payment, or otherwise delay |
51
final acceptance or installation, the deferred revenue would not be recognized, adversely affecting our future cash flows and operating results.
3. | Sales of certain equipment, spare parts and consumables are recognized upon shipment, as there are no post shipment obligations other than standard warranties. |
4. | Service revenue is recognized upon performance of the services requested by the customer. Revenue related to service contracts is recognized ratably over the period of the contract or in accordance with the terms of the contract, which generally coincides with the performance of the services requested by the customer. |
Deferred Profit – Revenue deferred pursuant to our revenue policy, net of the related deferred costs, if any, is recorded as deferred profit in current liabilities. The components of deferred profit are as follows:
September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Deferred revenue | $ | 7,029 | $ | 7,280 | $ | 8,118 | |||||
Deferred costs | 2,320 | 2,407 | 1,210 | ||||||||
Deferred profit | $ | 4,709 | $ | 4,873 | $ | 6,908 | |||||
Cash Equivalents – We consider all highly liquid investments with a maturity of three months or less when purchased to be cash equivalents. Our cash and cash equivalents consist of amounts invested in U.S. money market funds and various U.S. and foreign bank operating and time deposit accounts.
Restricted Cash – Restricted cash of $0.9 million and $0.6 million as of September 30, 2016 and 2015, respectively, includes collateral for bank guarantees required by certain customers from whom deposits have been received in advance of shipment. Restricted cash as of September 30, 2016 and 2015 includes $0.2 million relating to the Company's proportional responsibility, assumed in connection with the BTU acquisition, for clean-up costs at a Superfund site.
Accounts Receivable and Allowance for Doubtful Accounts – Accounts receivable are recorded at the gross sales price of products sold to customers on trade credit terms. Accounts receivable are considered past due when payment has not been received from the customer within the normal credit terms extended to that customer. A valuation allowance is established for accounts when collection is no longer probable. Accounts are written off against the allowance when the probability of collection is remote.
52
The following is a summary of the activity in the Company’s allowance for doubtful accounts:
Years Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Balance at beginning of year | $ | 5,009 | $ | 2,846 | $ | 638 | |||||
Provision / (Reversal) | 1,698 | (194 | ) | 1,304 | |||||||
Write offs | (1,942 | ) | (130 | ) | (13 | ) | |||||
Acquired through business acquisitions | — | 1,397 | — | ||||||||
Adjustment (1) (2) (3) | (1,035 | ) | 1,090 | 917 | |||||||
Balance at end of year | $ | 3,730 | $ | 5,009 | $ | 2,846 | |||||
(1) 2014 relates to an unbilled accounts receivable that was legally owed to the Company but was deemed uncollectible when the customer entered into bankruptcy proceedings. To allow for submission of billings to the courts, amounts were invoiced and fully reserved.
(2) 2015 amount primarily relates to cancellation fees that were legally owed to the Company but for which collectability was not assured. A portion of these fees were collected in 2016, and the remainder were written off.
(3) Includes foreign currency translation adjustments.
Accounts Receivable - Unbilled and Other – Unbilled and other accounts receivable consist mainly of the contingent portion of the sales price that is not collectible until successful installation of the product. These amounts are generally billed upon final customer acceptance.
Concentrations of Credit Risk – Financial instruments that potentially subject the Company to significant concentrations of credit risk consist principally of cash and trade accounts receivable. The Company’s customers consist of solar cell and semiconductor manufacturers worldwide, as well as the lapping and polishing marketplace. Credit risk is managed by performing ongoing credit evaluations of the customers’ financial condition, by requiring significant deposits where appropriate, and by actively monitoring collections. Letters of credit are required of certain customers depending on the size of the order, type of customer or its creditworthiness, and country of domicile. Reserves for potentially uncollectible receivables are maintained based on an assessment of collectability.
The Company maintains its cash, cash equivalents and restricted cash in multiple financial institutions. Balances in the United States (approximately 70% and 62% of total cash balances as of September 30, 2016 and 2015, respectively) are primarily invested in US Treasuries or are in financial institutions insured by the Federal Deposit Insurance Corporation (FDIC). The remainder of the Company’s cash is maintained with financial institutions with reputable credit in The Netherlands, France and China.
As of September 30, 2016, one customer individually represented 11% of accounts receivable. As of September 30, 2015, no customer individually represented greater than 10% of accounts receivable.
Refer to Note 8, Geographic Regions, for information regarding revenue and assets in other countries subject to fluctuation in foreign currency exchange rates.
Inventories – We value our inventory at the lower of cost or net realizable value. Costs for approximately 50% and 60% of inventory as of September 30, 2016 and 2015, respectively, are determined on an average cost basis with the remainder determined on a first-in, first-out (FIFO) basis. The components of inventories are as follows:
September 30, 2016 | September 30, 2015 | ||||||
(dollars in thousands) | |||||||
Purchased parts and raw materials | $ | 12,435 | $ | 11,587 | |||
Work-in-process | 7,044 | 5,089 | |||||
Finished goods | 3,744 | 6,653 | |||||
$ | 23,223 | $ | 23,329 | ||||
53
Notes and Other Receivables – Notes and other Receivable consists of amounts due to the Company for the sale of Kingstone shares and repayment of a loan (see Note 14 "Deconsolidation"). The carrying amount of the notes receivable approximated fair value due to its short-term nature.
Property, Plant and Equipment – Property plant, and equipment are recorded at cost. Maintenance and repairs are charged to expense as incurred. The cost of property retired or sold and the related accumulated depreciation and amortization are removed from the applicable accounts when disposition occurs and any gain or loss is recognized. Depreciation and amortization is computed using the straight-line method. Depreciation and capital lease amortization expense was $2.1 million, $2.2 million and $1.7 million in fiscal years 2016, 2015 and 2014, respectively. Useful lives for equipment, machinery and leasehold improvements range from three to seven years; for furniture and fixtures from five to ten years; and for buildings 20 to 30 years.
The following is a summary of property, plant and equipment:
September 30, 2016 | September 30, 2015 | ||||||
(dollars in thousands) | |||||||
Land, building and leasehold improvements | $ | 18,255 | $ | 18,095 | |||
Equipment and machinery | 9,056 | 9,709 | |||||
Furniture and fixtures | 5,426 | 5,465 | |||||
32,737 | 33,269 | ||||||
Accumulated depreciation and amortization | (16,777 | ) | (15,508 | ) | |||
$ | 15,960 | $ | 17,761 | ||||
Goodwill – Goodwill and intangible assets with indefinite lives are not subject to amortization, but are tested for impairment when it is determined that it is more likely than not that the fair value of a reporting unit or the indefinite-lived intangible asset is less than its carrying amount, typically at the end of the fiscal year, or more frequently if circumstances dictate. During the fourth quarter of fiscal 2015, the Company obtained additional information relating to the fair value of tangible and intangible assets acquired from SoLayTec and BTU, resulting in an increase to goodwill of $0.9 million and a decrease of $0.2 million, respectively. As detailed in Note 14 "Deconsolidation", the Company deconsolidated Kingstone as of September 16, 2015. The adjustment to goodwill as a result of the deconsolidation of Kingstone is shown in the table below.
The changes in the carrying amount of goodwill for the year ended September 30, 2016 are as follows.
Solar | Semiconductor | Polishing | Total | ||||||||||||
(dollars in thousands) | |||||||||||||||
Goodwill | $ | 6,617 | $ | 4,463 | $ | 728 | $ | 11,808 | |||||||
Accumulated impairment losses | (1,273 | ) | — | — | (1,273 | ) | |||||||||
Carrying value at September 30, 2015 | 5,344 | 4,463 | 728 | 10,535 | |||||||||||
Reallocation of goodwill | — | 600 | — | 600 | |||||||||||
Net exchange differences | (16 | ) | — | — | (16 | ) | |||||||||
Carrying value at September 30, 2016 | $ | 5,328 | $ | 5,063 | $ | 728 | $ | 11,119 | |||||||
Goodwill | $ | 6,597 | $ | 5,063 | $ | 728 | $ | 12,388 | |||||||
Accumulated impairment losses | (1,269 | ) | — | — | (1,269 | ) | |||||||||
Carrying value at September 30, 2016 | $ | 5,328 | $ | 5,063 | $ | 728 | $ | 11,119 | |||||||
Intangibles - Intangible assets are capitalized and amortized on a straight-line basis over their useful life if the life is determinable. If the life is not determinable, amortization is not recorded. Amortization expense related to intangible assets was $0.8 million, $1.2 million and $0.7 million in fiscal years 2016, 2015 and 2014, respectively. The aggregate amortization expense for the intangible assets for each of the five succeeding fiscal years is estimated to be $0.7 million, $0.6 million, $0.6 million, $0.6 million and $0.4 million in 2017, 2018, 2019, 2020 and 2021.
54
On December 24, 2014, the Company acquired a 51% controlling interest in SoLayTec. The intangible assets of SoLayTec total $2.0 million, of which $1.8 million is included in "Technology" and $0.2 million is included in "Trade names" in the table below. On January 30, 2015, the Company completed the merger with BTU. The intangible assets of BTU total $2.9 million, of which $1.2 million is included in "Trade names" and $1.7 million is included in "Customer lists" in the table below. See Note 13, “Acquisitions,” for more information regarding the acquisition of SoLayTec and the merger with BTU.
As a result of the sale of the Company's partial ownership in Kingstone in fiscal 2015, the Company derecognized $3.2 million of intangible assets and $1.9 million of accumulated amortization. See Note 14 "Deconsolidation" for additional details relating to the deconsolidation of Kingstone.
The following is a summary of intangibles:
Useful Life | Gross Carrying Amount | Accumulated Amortization | Net Carrying Amount | Gross Carrying Amount | Accumulated Amortization | Net Carrying Amount | |||||||||||||||
Years Ended September 30, | |||||||||||||||||||||
2016 | 2015 | ||||||||||||||||||||
(dollars in thousands) | |||||||||||||||||||||
Customer lists | 6-10 years | $ | 2,432 | $ | (1,164 | ) | $ | 1,268 | $ | 2,434 | $ | (808 | ) | $ | 1,626 | ||||||
Technology | 5-10 years | 3,214 | (1,678 | ) | 1,536 | 3,223 | (1,368 | ) | 1,855 | ||||||||||||
Trade names | 10-15 Years | 1,455 | (219 | ) | 1,236 | 1,456 | (72 | ) | 1,384 | ||||||||||||
Other | 2-10 years | 277 | (217 | ) | 60 | 278 | (204 | ) | 74 | ||||||||||||
$ | 7,378 | $ | (3,278 | ) | $ | 4,100 | $ | 7,391 | $ | (2,452 | ) | $ | 4,939 | ||||||||
Warranty – A limited warranty is provided free of charge, generally for periods of 12 to 24 months to all purchasers of the Company’s new products and systems. Accruals are recorded for estimated warranty costs at the time revenue is recognized. The following is a summary of activity in accrued warranty expense:
Years Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Beginning balance | $ | 793 | $ | 628 | $ | 1,454 | |||||
Warranty – BTU merger | — | 806 | — | ||||||||
Additions for warranties issued during the period | 1,074 | 677 | 479 | ||||||||
Reductions in the liability for payments made under the warranty | (832 | ) | (1,007 | ) | (390 | ) | |||||
Changes related to pre-existing warranties | (250 | ) | (215 | ) | (750 | ) | |||||
Currency translation adjustment | 10 | (96 | ) | (165 | ) | ||||||
Ending balance | $ | 795 | $ | 793 | $ | 628 | |||||
Research, Development and Engineering Expenses – Research, development and engineering expenses consist of the cost of employees, consultants and contractors who design, engineer and develop new products and processes as well as materials, supplies and facilities used in producing prototypes. Payments received for research and development grants prior to the meeting of milestones are recorded as unearned research and development grant liabilities and included in other accrued liabilities on the balance sheet. When certain contract requirements are met, governmental research and development grants are netted against research and development expenses.
55
Years Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Research, development and engineering | $ | 9,535 | $ | 13,214 | $ | 10,863 | |||||
Grants earned | (1,531 | ) | (6,296 | ) | (4,572 | ) | |||||
Net research, development and engineering | $ | 8,004 | $ | 6,918 | $ | 6,291 | |||||
Shipping Expense – Shipping expenses of $2.3 million, $2.5 million and $1.0 million for fiscal 2016, 2015 and 2014 are included in selling, general and administrative expenses.
Foreign Currency Transactions and Translation – Our operations in Europe, China and other countries are primarily conducted in their functional currencies, the Euro, Renminbi, or the local country currency, respectively. Net income includes a pretax net loss from foreign currency transactions of less than $0.1 million in fiscal 2016 and pretax net gains of $0.3 million and less than $0.1 million in fiscal 2015 and 2014, respectively. The gains or losses resulting from the translation of foreign financial statements have been included in other comprehensive income (loss).
Income Taxes – The Company files consolidated federal income tax returns in the United States for all subsidiaries except those in the Netherlands, France, Hong Kong and China, where separate returns are filed. The Company computes deferred income tax assets and liabilities based upon cumulative temporary differences between financial reporting and taxable income, carryforwards available and enacted tax laws. The Company also accrues a liability for uncertain tax positions when it is more likely than not that such tax will be incurred.
Deferred tax assets reflect the tax effects of temporary differences between the carrying value of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Deferred tax assets are reduced by a valuation allowance when, in the opinion of management and based on the weight of available evidence, it is more likely than not that a portion or all of the deferred tax asset will not be realized. Each quarter, the valuation allowance is re-evaluated.
Stock-Based Compensation – The Company measures compensation costs relating to share-based payment transactions based upon the grant-date fair value of the award. Those costs are recognized as expense over the requisite service period, which is generally the vesting period. The benefits or deficiencies of tax deductions in excess of or less than recognized compensation cost are reported as cash flow from financing activities rather than as cash flow from operating activities.
Stock-based compensation expense for the fiscal years ended September 30, 2016, 2015 and 2014 reduced the Company’s results of operations as follows:
Years Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Effect on income before income taxes (1) | $ | (1,390 | ) | $ | (1,162 | ) | $ | (795 | ) | ||
Effect on income taxes | $ | 186 | $ | 221 | $ | 326 | |||||
Effect on net income | $ | (1,204 | ) | $ | (941 | ) | $ | (469 | ) | ||
(1) Stock-based compensation expense is included in selling, general and administrative expense
The Company awards restricted shares under the existing share-based compensation plans. Our restricted share-awards vest in equal annual installments over 6 months to four years. The total value of these awards is expensed on a ratable basis over the service period of the employees receiving the grants. The “service period” is the time during which the employees receiving grants must remain employed for the shares granted to fully vest.
Qualified stock options issued under the terms of the plans have, or will have, an exercise price equal to, or greater than, the fair market value of the common stock at the date of the option grant, and expire no later than ten years from the date of grant, with the most recent grant expiring in 2026. Options vest over 6 months to 4 years. The Company
56
estimates the fair value of stock option awards on the date of grant using the Black-Scholes option pricing model using the following assumptions:
Years Ended September 30, | |||||
2016 | 2015 | 2014 | |||
Risk free interest rate | 2% | 2% | 2% | ||
Expected life | 6 years | 6 years | 6 years | ||
Dividend rate | 0% | 0% | 0% | ||
Volatility | 63% | 67% | 69% | ||
To estimate expected lives for this valuation, it was assumed that options will be exercised at varying schedules after becoming fully vested. Forfeitures have been estimated at the time of grant and will be revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates. Forfeitures were estimated based upon historical experience. Fair value computations are highly sensitive to the volatility factor assumed; the greater the volatility, the higher the computed fair value of the options granted. The Company uses historical stock prices to determine the volatility factor.
Fair Value of Financial Instruments - In accordance with the requirements of the Fair Value Measurements and Disclosures Topic of the Financial Accounting Standards Board ("FASB") Accounting Standards Codification (ASC), the Company groups its financial assets and liabilities measured at fair value on a recurring basis in three levels, based on the markets in which the assets and liabilities are traded and the reliability of the assumptions used to determine fair value. These levels are:
Level 1 - Valuation is based upon quoted market price for identical instruments traded in active markets.
Level 2 - Valuation is based on quoted market prices for similar instruments in active markets, quoted prices for identical or similar instruments in markets that are not active, and model-based valuation techniques for which all significant assumptions are observable in the market.
Level 3 - Valuation is generated from model-based techniques that use significant assumptions not observable in the market. Valuation techniques include use of discounted cash flow models and similar techniques.
In accordance with the requirements of the Fair Value Measurements and Disclosures Topic of the FASB ASC, it is the Company's policy to use observable inputs whenever reasonably practicable in order to minimize the use of unobservable inputs when developing fair value measurements. When available, the Company uses quoted market prices to measure fair value. If market prices are not available, the fair value measurement is based on models that use primarily market based parameters including interest rate yield curves, option volatilities and currency rates. In certain cases, where market rate assumptions are not available, the Company is required to make judgments about assumptions market participants would use to estimate the fair value of a financial instrument. Changes in the underlying assumptions used, including discount rates and estimates of future cash flows, could significantly affect the results of current or future values.
Cash, Cash Equivalents and Restricted Cash - Included in Cash and Cash Equivalents in the Consolidated Balance Sheets are money market funds invested in treasury bills, notes and other direct obligations of the U.S. Treasury and foreign bank operating and time deposit accounts. The fair value of this cash equivalent is based on Level 1 inputs in the fair value hierarchy.
Receivables and Payables -The recorded amounts of these financial instruments, including accounts receivable and accounts payable, approximate their fair value because of the short maturities of these instruments. If measured at fair value in the financial statements, these financial instruments would be classified as Level 3 in the fair value hierarchy.
Pensions – The Company has retirement plans covering substantially all employees. The principal plans are the multiemployer defined benefit pension plans of the Company’s operations in the Netherlands and France and the multiemployer plan for hourly union employees in Pennsylvania and the Company's defined contribution plan that covers substantially all of the employees in the United States. The multiemployer plans in the United States and France are insignificant.
57
The Company’s employees in The Netherlands, approximately 130, participate in a multi-employer pension plan Pensioenfonds Metaal en Techniek (“PMT”), determined in accordance with the collective bargaining agreements effective for the industry in the Netherlands. This collective bargaining agreement has no expiration date. This multiemployer pension plan covers approximately 33,000 companies and 1.2 million participants. Amtech's contribution to the multiemployer pension plan is less than 5.0% of the total contributions to the plan. The plan monitors its risks on a global basis, not by company or employee, and is subject to regulation by Dutch governmental authorities. By law (the Dutch Pension Act), a multiemployer pension plan must be monitored against specific criteria, including the coverage ratio of the plan assets to its obligations. This coverage ratio must exceed 105% for the total plan. Every company participating in a Dutch multiemployer union plan contributes a premium calculated as a percentage of its total pensionable salaries, with each company subject to the same percentage contribution rate. The premium can fluctuate yearly based on the coverage ratio of the multiemployer union plan. The pension rights of each employee are based upon the employee’s average salary during employment, the years of service, and the participant's age at the time of retirement.
The Company's net periodic pension cost for this multiemployer pension plan for any period is the amount of the required contribution for that period. A contingent liability may arise from, for example, possible actuarial losses relating to other participating entities because each entity that participates in a multiemployer union plan shares in the actuarial risks of every other participating entity or any responsibility under the terms of a plan to finance any shortfall in the plan if other entities cease to participate
The coverage ratio of the Dutch multiemployer union plan is 92.1% as of September 30, 2016. In 2013, PMT prepared and executed a “Recovery Plan” which was approved by De Nederlandsche Bank, the Dutch central bank, which is the supervisor of all pension companies in the Netherlands. As a result of the Recovery Plan, the pension rights decreased 6.3% in April 2013 and the employer's premium percentage increased to 16.6% of pensionable wages. The coverage ratio is calculated by dividing the plan assets by the total sum of pension liabilities and is based on actual market interest. The coverage ratio of PMT fluctuates during a year due to the changes in the value of the assets and the present value of the liabilities. During the fiscal year 2016 the coverage ratio was as high as 99.2% in the first quarter and as low as 89.6% in the second quarter. The fluctuations are due to the reduction in the ultimate forward rate (which increases the present value of the liabilities) and a decrease in the value of global equities. As of September 30, 2016 PMT's total plan assets were $76.7 billion and the actuarial present value of accumulated plan benefits was $83.3 billion.
Below is a table of contributions made by the Company to multiemployer pension plans:
Contributions | |||||||||||
Years Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Pensioenfonds Metaal en Techniek (PMT) | $ | 796 | $ | 805 | $ | 929 | |||||
Other plans | 187 | 158 | 158 | ||||||||
Total | $ | 983 | $ | 963 | $ | 1,087 | |||||
The Company matches employee funds to the Company's defined contribution plans on a discretionary basis. The match was insignificant in fiscal years 2016, 2015 and 2014.
Reclassifications – Certain reclassifications have been made to prior year financial statements to conform to the current year presentation relating to segment disclosure (see Note 7). Specifically, allowance for doubtful accounts, and warranty have been modified to provide a greater level of detail. These reclassifications had no effect on the previously reported Consolidated Financial Statements for any period.
Impact of Recently Issued Accounting Pronouncements
In August 2016, the FASB issued ASU 2016-15, “Statement of Cash Flows (Topic 230): Classification of Certain Cash Receipts and Cash Payments”. These amendments provide cash flow statement classification guidance for: 1. Debt Prepayment or Debt Extinguishment Costs; 2. Settlement of Zero-Coupon Debt Instruments or Other Debt Instruments with Coupon Interest Rates That Are Insignificant in Relation to the Effective Interest Rate of the Borrowing; 3. Contingent Consideration Payments Made after a Business Combination; 4. Proceeds from the Settlement of Insurance
58
Claims; 5. Proceeds from the Settlement of Corporate-Owned Life Insurance Policies, including Bank-Owned Life Insurance Policies; 6. Distributions Received from Equity Method Investees; 7. Beneficial Interests in Securitization Transactions; and 8. Separately Identifiable Cash Flows and Application of the Predominance Principle. The amendments in this ASU are effective for public business entities for fiscal years beginning after December 15, 2017, and interim periods within those fiscal years. Early application is permitted, including adoption in an interim period. The Company is currently in the process of evaluating the impact of the adoption on its consolidated financial statements.
In June 2016, the FASB issued ASU 2016-13, “Financial Instruments - Credit Losses: Measurement of Credit Losses on Financial Instruments”. ASU 2016-13 amends the impairment model to utilize an expected loss methodology in place of the currently used incurred loss methodology, which will result in the more timely recognition of losses. The new standard applies to financial assets measured at amortized cost basis, including receivables that result from revenue transactions and held-to-maturity debt securities. The new guidance will be effective for the Company starting in the first quarter of fiscal 2021. Early adoption is permitted starting in the first quarter of fiscal 2020. The Company is in the process of determining the effects the adoption will have on its consolidated financial statements as well as whether to adopt the new guidance early.
In May 2014, the FASB issued Accounting Standards Update No. 2014-09 regarding ASC Topic 606, “Revenue from Contracts with Customers.” ASU 2014-09 provides principles for recognizing revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. In August 2015, the FASB issued ASU 2015-14 to defer the effective date by one year with early adoption permitted as of the original effective date. ASU 2014-09 will be effective for Amtech’s fiscal year beginning October 1, 2018 unless we elect the earlier date of October 1, 2017. In addition, the FASB issued ASU 2016-08, ASU 2016-10, and ASU 2016-12 in March 2016, April 2016, and May 2016, respectively, to help provide interpretive clarifications on the new guidance in ASC Topic 606. The Company is currently assessing the impact that adopting this new accounting standard will have on its consolidated financial statements.
In March 2016, the FASB issued ASU No. 2016-09, Compensation - “Stock Compensation (Topic 718)”. ASU 2016-09 identifies areas for simplification involving several aspects of accounting for share-based payment transactions, including the income tax consequences, classification of awards as either equity or liabilities, an option to recognize gross stock compensation expense with actual forfeitures recognized as they occur, as well as certain classifications on the statement of cash flows. The amendments in this ASU are effective for annual periods beginning after December 15, 2016 and for the interim periods therein. The Company is currently assessing the impact that adopting this new accounting standard will have on its consolidated financial statements.
In March 2016, the FASB issued ASU 2016-07, “Equity Method and Joint Ventures” affecting all entities that have an investment that becomes qualified for the equity method of accounting as a result of an increase in the level of ownership or degree of influence. ASU 2016-07 is effective for the Company beginning on January 1, 2017, early adoption is permitted. The adoption of this guidance by the Company is not expected to have a material impact on its consolidated financial statements.
In February 2016, the FASB issued ASU No. 2016-02, “Leases (Topic 842)”, which requires companies to generally recognize on the balance sheet operating and financing lease liabilities and corresponding right-of-use-assets. ASU 2016-02 also requires improved disclosures to help users of financial statements better understand the amount, timing and uncertainty of cash flows arising from leases. This ASU is effective for fiscal years beginning after December 15, 2018 and early application is permitted. The Company is currently in the process of evaluating the impact of this standard on its consolidated financial statements.
In January 2016, the FASB issued ASU No. 2016-01, “Financial Instruments - Overall (Subtopic 825-10), Recognition and Measurement of Financial Assets and Financial Liabilities”, which addresses certain aspects of recognition, measurement, presentation, and disclosure of financial instruments. This ASU is effective for fiscal years beginning after December 15, 2017 and early adoption is not permitted. The Company is currently evaluating the impact that the standard will have on its consolidated financial statements.
In November 2015, the FASB issued ASU No. 2015-17, “Balance Sheet Classification of Deferred Taxes”. This ASU requires entities to classify deferred tax liabilities and assets as noncurrent in a classified statement of financial position. This ASU is effective for fiscal years beginning after December 15, 2016, and interim periods within those annual periods. Early adoption is permitted for all entities as of the beginning of an interim or annual reporting period. The
59
adoption of this guidance by the Company is not expected to have a material impact on its consolidated financial statements.
In July 2015, the FASB issued ASU No. 2015-16, “Business Combinations (Topic 805): Simplifying the Accounting for Measurement-Period Adjustments”, which simplifies the accounting for measurement-period adjustments to provisional amounts recognized in a business combination. ASU 2015-16 is effective for fiscal years (and interim reporting periods within those years) beginning after December 15, 2016. The provisions of ASU 2015-16 are not expected to have a material effect on the Company's financial condition, results of operations, or cash flows.
In July 2015, the FASB issued ASU No. 2015-11, “Simplifying the Measurement of Inventory”. This ASU simplifies the measurement of inventory by requiring certain inventory to be measured at the lower of cost or net realizable value. The amendments in this ASU are effective for fiscal years beginning after December 15, 2016 and for interim periods therein. The Company does not expect adoption of this ASU to have a material impact on the Company's consolidated financial position and results of operations.
2. Stock-Based Compensation
Stock-Based Plans –The 2007 Employee Stock Incentive Plan (the “2007 Plan), under which 500,000 shares could be granted, was adopted by the Board of Directors in April 2007, and approved by the shareholders in May 2007. The 2007 Plan was amended in 2009, 2014, and 2015 to add 2,500,000 shares. The Non-Employee Directors Stock Option Plan was approved by the shareholders in 1996 for issuance of up to 100,000 shares of Common Stock to directors. The Non-Employee Directors Stock Option Plan was amended in 2005, 2009, and 2014 to add 400,000 shares.
Stock options issued under the terms of the plans have, or will have, an exercise price equal to or greater than the fair market value of the Common Stock at the date of the option grant and expire no later than 10 years from the date of grant, with the most recent grant expiring in 2026. Options issued by the Company vest over 6 months to 4 years. The Company may also grant restricted stock awards under the 2007 Plan.
As of September 30, 2016 there was no unamortized expense related to restricted shares. As of September 30, 2015 the unamortized expense was less than $0.1 million.
Restricted stock transactions and outstanding awards are summarized as follows:
Years Ended September 30, | ||||||||||||||||||||
2016 | 2015 | 2014 | ||||||||||||||||||
Awards | Weighted Average Grant Date Fair Value | Awards | Weighted Average Grant Date Fair Value | Awards | Weighted Average Grant Date Fair Value | |||||||||||||||
Beginning Outstanding | 13,540 | $ | 7.98 | 35,203 | $ | 10.13 | 69,154 | $ | 10.13 | |||||||||||
Released | (13,540 | ) | 7.98 | (21,663 | ) | 11.47 | (33,951 | ) | 10.13 | |||||||||||
Ending Outstanding | — | $ | — | 13,540 | $ | 7.98 | 35,203 | $ | 10.13 | |||||||||||
Stock-based compensation plans are summarized in the table below:
Name of Plan | Shares Authorized | Shares Available | Options Outstanding | Plan Expiration | |||||||
2007 Employee Stock Incentive Plan | 3,000,000 | 722,102 | 1,603,887 | Mar. 2020 | |||||||
1998 Employee Stock Option Plan | 500,000 | — | 23,210 | Jan. 2008 | |||||||
Non-Employee Directors Stock Option Plan | 500,000 | 131,600 | 214,470 | Mar. 2020 | |||||||
853,702 | 1,841,567 | ||||||||||
Stock options were valued using the Black-Scholes option pricing model. See Note 1 for further discussion. Stock option transactions and the options outstanding are summarized as follows:
60
Years Ended September 30, | |||||||||||||||||||||||
2016 | 2015 | 2014 | |||||||||||||||||||||
Options | Weighted Average Exercise Price | Options | Weighted Average Exercise Price | Options | Weighted Average Exercise Price | ||||||||||||||||||
Outstanding at beginning of period | 1,627,477 | $ | 9.11 | 1,063,324 | $ | 7.37 | 1,059,567 | $ | 6.71 | ||||||||||||||
Granted | 360,075 | 5.25 | 327,500 | 9.74 | 272,906 | 7.01 | |||||||||||||||||
Assumed - merger | — | — | 367,229 | 14.19 | — | — | |||||||||||||||||
Exercised | (15,346 | ) | 3.28 | (94,701 | ) | 5.52 | (263,643 | ) | 4.31 | ||||||||||||||
Forfeited/canceled | (130,639 | ) | 12.86 | (35,875 | ) | 24.71 | (5,506 | ) | 9.63 | ||||||||||||||
Outstanding at end of period | 1,841,567 | $ | 8.15 | 1,627,477 | $ | 9.11 | 1,063,324 | $ | 7.37 | ||||||||||||||
Exercisable at end of period | 1,127,611 | $ | 8.92 | 1,002,421 | $ | 9.74 | 674,237 | $ | 8.18 | ||||||||||||||
Weighted average grant-date fair value of options granted during the period | $ | 3.03 | $ | 5.91 | $ | 4.38 | |||||||||||||||||
61
The following tables summarize information for stock options outstanding and exercisable as of September 30, 2016:
Options Outstanding | |||||||||||||
Range of Exercise Prices | Number Outstanding | Remaining Contractual Life | Average Exercise Price | Aggregate Intrinsic Value | |||||||||
(in years) | (in thousands) | ||||||||||||
2.95-4.85 | 192,954 | 5.69 | $ | 3.19 | |||||||||
5.01-5.20 | 5,010 | 2.78 | 5.05 | ||||||||||
5.25-5.25 | 337,600 | 9.13 | 5.25 | ||||||||||
5.40-7.00 | 107,261 | 2.85 | 6.26 | ||||||||||
7.01-7.01 | 266,106 | 7.20 | 7.01 | ||||||||||
7.15-7.87 | 54,390 | 4.53 | 7.59 | ||||||||||
7.98-7.98 | 239,873 | 5.21 | 7.98 | ||||||||||
8.20-9.94 | 91,888 | 5.72 | 8.87 | ||||||||||
9.98-9.98 | 281,750 | 8.14 | 9.98 | ||||||||||
10.50-27.47 | 264,735 | 2.70 | 15.52 | ||||||||||
1,841,567 | 6.21 | $ | 8.15 | $ | 342 | ||||||||
Vested and expected to vest as of September 30, 2016 | 1,838,990 | 6.21 | $ | 8.15 | $ | 342 | |||||||
Options Exercisable | |||||||||||
Range of Exercise Prices | Number Exercisable | Weighted Average Exercise Price | Aggregate Intrinsic Value | ||||||||
(in thousands) | |||||||||||
2.95-4.85 | 152,595 | $ | 3.12 | ||||||||
5.01-5.20 | 5,010 | 5.05 | |||||||||
5.25-5.25 | 24,000 | 5.25 | |||||||||
5.40-7.00 | 107,261 | 6.26 | |||||||||
7.01-7.01 | 157,654 | 7.01 | |||||||||
7.15-7.87 | 32,342 | 7.40 | |||||||||
7.98-7.98 | 239,873 | 7.98 | |||||||||
8.20-9.94 | 60,638 | 9.21 | |||||||||
9.98-9.98 | 87,503 | 9.98 | |||||||||
10.50-27.47 | 260,735 | 15.60 | |||||||||
1,127,611 | 8.92 | $ | 280 | ||||||||
The aggregate intrinsic value in the tables above represents the total pretax intrinsic value, based on the Company’s closing stock price of $4.96 per share as of September 30, 2016, which would have been received by the option holders had all option holders exercised their options as of that date. The total intrinsic value of stock options exercised during the fiscal years ended September 30, 2016, 2015 and 2014 was less than $0.1 million, $0.6 million and $1.8 million, respectively.
3. Earnings Per Share & Diluted Earnings Per Share
Basic earnings per share is computed by dividing net income (loss) available to common stockholders by the weighted average number of common shares outstanding for the period. Diluted earnings (loss) per share is computed similarly
62
to basic earnings per share except that the denominator is increased to include the number of additional common shares that would have been outstanding if potentially dilutive common shares had been issued, and the numerator is based on net income (loss). In the case of a net loss, diluted earnings per share is calculated in the same manner as basic earnings per share. Options and restricted stock of approximately 1,840,000, 1,640,000 and 1,099,000 shares are excluded from the fiscal 2016, 2015 and 2014 earnings per share calculations as they are anti-dilutive.
Years ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands, except per share amounts) | |||||||||||
Basic Earnings Per Share Computation | |||||||||||
Net loss attributable to Amtech Systems, Inc. | $ | (7,008 | ) | $ | (7,771 | ) | $ | (13,047 | ) | ||
Weighted Average Shares Outstanding: | |||||||||||
Common stock | 13,168 | 12,022 | 9,732 | ||||||||
Basic loss per share attributable to Amtech shareholders | $ | (0.53 | ) | $ | (0.65 | ) | $ | (1.34 | ) | ||
Diluted Earnings Per Share Computation | |||||||||||
Net loss attributable to Amtech Systems, Inc. | $ | (7,008 | ) | $ | (7,771 | ) | $ | (13,047 | ) | ||
Weighted Average Shares Outstanding: | |||||||||||
Common stock | 13,168 | 12,022 | 9,732 | ||||||||
Common stock equivalents (1) | — | — | — | ||||||||
Diluted shares | 13,168 | 12,022 | 9,732 | ||||||||
Diluted loss per share attributable to Amtech shareholders | $ | (0.53 | ) | $ | (0.65 | ) | $ | (1.34 | ) | ||
(1) The number of common stock equivalents is calculated using the treasury stock method and the average market price during the period.
4. Stockholders’ Equity
Shareholder Rights Plan – On December 15, 2008, the Company and Computershare Trust Company, N.A., as Rights Agent (the “Rights Agent”), entered into an Amended and Restated Rights Agreement (the “Restated Rights Agreement”) which amended and restated the terms governing the previously authorized shareholder rights (each a “Right”) to purchase fractional shares of the Company’s Series A Participating Preferred Stock (“Series A Preferred”) currently attached to each of the Company’s outstanding Common Shares, par value $0.01 per share (“Common Shares”). As amended, each Right entitles the registered holder to purchase from the Company one one thousandth of a share of Series A Preferred at an exercise price of $51.60 (the “Exercise Price”), subject to adjustment. The rights will expire 10 years after issuance and will be exercisable if (a) a person or group becomes the beneficial owner of 15% or more of the Company’s common stock or (b) a person or group commences a tender or exchange offer that would result in the offeror beneficially owning 15% or more of the Company’s common stock. The Final Expiration Date (as defined in the Restated Rights Agreement) is December 14, 2018.
On October 1, 2015, the Company entered into a Second Amended and Restated Rights Agreement (the “Second Restated Rights Agreement”) with Computershare Trust Company, N.A., which expands the definition of Exempted Person to include any person that the Board, in its sole and absolute discretion, exempts from becoming an Acquiring Person under the Second Restated Rights Agreement. A Person deemed an Exempted Person under the Second Restated Rights Agreement cannot trigger any of the Rights provided therein so long as such Exempted Person complies with the terms and conditions by which the Board approved such exemption from the Restated Rights Agreement.
As previously disclosed, on October 8, 2015, the Company entered into a Letter Agreement (the “Agreement”) by and between the Company and certain shareholders of the Company who jointly file (the “Joint Filers”) under Section 13 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). The Agreement permits the Joint Filers, pursuant to the Restated Rights Agreement, to individually acquire shares of common stock of the Company that would, in the aggregate, bring the Joint Filers’ collective ownership to no more than 19.9% of the Company’s issued and outstanding common stock at any time. In the event the Joint Filers’ collective ownership at any time exceeds 19.9% of the Company’s issued and outstanding shares of common stock, the Company is entitled to specific performance and all other remedies entitled to the Company at law or equity, among others. The Company’s board of directors
63
approved the Agreement and transactions contemplated thereunder, and has the sole authority to terminate the Agreement at any time.
5. Commitments and Contingencies
Purchase Obligations – As of September 30, 2016, the Company had unrecorded purchase obligations in the amount of $11.3 million. These purchase obligations consist of outstanding purchase orders for goods and services. While the amount represents purchase agreements, the actual amounts to be paid may be less in the event that any agreements are renegotiated, canceled or terminated.
Development Projects – In fiscal 2014, Tempress Systems, Inc. ("Tempress") entered into an agreement with the Energy Research Centre of the Netherlands ("ECN"), a Netherlands government sponsored research institute, for a joint research and development project. Under the terms of the agreement, Tempress sold an ion implanter ("Equipment") to ECN for $1.4 million. Both Tempress and ECN are performing research and development projects utilizing the Equipment at the ECN facilities. Each party to the agreement will have 100% rights to the results of the projects developed separately by the individual parties. Any results co-developed will be jointly owned. Over the four-year period of the agreement, Tempress is required to contribute $1.4 million to the project in the form of installation of the equipment, acceptance testing, project meeting attendance, training, parts, and service, including keeping the equipment in good condition and repair for the first two years of the agreement. As of September 30, 2016, Tempress has contributed all of the required $1.4 million to the project.
EPA Accrual - As a result of the BTU acquisition, the Company assumed BTU’s proportional responsibility for clean-up costs at a Superfund site. As an equipment manufacturer, BTU generated and disposed of small quantities of solid waste that were considered hazardous under Environment Protection Agency (“EPA”) regulations. Because BTU historically used a waste disposal firm that disposed of the solid waste at a site that the EPA designated as a Superfund site, BTU was named by the EPA as one of the entities responsible for a portion of the expected clean-up costs. Based on the Company's proportional responsibility, as negotiated with and agreed to by the EPA, the Company's liability related to this matter is less than $0.1 million, which is included in Other Accrued Liabilities on the Consolidated Balance Sheet as of September 30, 2016. In accordance with the agreement, the Company established a letter of credit for $0.2 million to the benefit of the EPA for potential cash payments as settlements for the Company’s proportional liability.
Legal Proceedings – The Company and its subsidiaries are defendants from time to time in actions for matters arising out of their business operations.The Company does not believe that any matters or proceedings presently pending will have a material adverse effect on its consolidated financial position, results of operations or liquidity.
As previously disclosed in the Company’s filings with the SEC, shortly after the Company entered into the merger agreement with BTU, two separate putative stockholder class action complaints (together, the "Stockholder Actions") were filed in the Court of Chancery of the State of Delaware (the "Delaware Court"). The first was filed on November 4, 2014 and the second on November 17, 2014, on behalf of BTU’s public stockholders, against BTU, members of the BTU board, Amtech and the special purpose merger subsidiary. The Stockholder Actions were consolidated on December 4, 2014. The complaints generally alleged that, in connection with entering into the merger agreement, the BTU board of directors breached certain fiduciary duties owed to BTU's stockholders. The complaints sought various forms of declaratory and injunctive relief, as well as compensatory damages.
On February 18, 2016, the Delaware Court entered the Order approving the Amended Stipulation of Settlement. As a result, the Released Claims were dismissed with prejudice and without any admission of wrongdoing by any of the parties to the Stockholder Actions. Pursuant to the Amended Stipulation of Settlement, BTU, its insurer(s), or its successor(s) in interest are responsible for payment of fees and expenses in the amount of $325,000 which were paid in full on April 1, 2016.
As described above, the Released Claims are limited solely to claims related to any disclosures (or lack thereof) to BTU’s stockholders concerning the merger and any fiduciary claims concerning the decision to enter into the merger. While we are currently unaware of any other pending or threatened litigation related to additional claims arising from the Stockholder Actions, any future claims are uncertain, so additional harm could potentially result to the Company from this litigation, which may cause the Company to incur substantial costs and divert management’s attention from operational matters.
64
Operating Leases – The Company leases buildings, vehicles and equipment under operating leases. Rental expense under such operating leases was $1.4 million, $1.2 million, and $1.0 million in fiscal 2016, 2015 and 2014, respectively. As of September 30, 2016, future minimum rental commitments under non-cancelable operating leases with initial or remaining terms of one year or more totaled $2.6 million, of which $1.2 million, $0.7 million, $0.4 million, $0.2 million and $0.1 million is payable in fiscal 2017, 2018, 2019, 2020 and 2021, respectively, and none thereafter.
6. Major Customers and Foreign Sales
In fiscal 2016, one customer accounted for 11% of net revenues. In fiscal 2015, two customers individually accounted for 15% and 11% of net revenues. In fiscal 2014, two customers individually accounted for 18% and 11% of net revenues.
Our net revenues for fiscal 2016, 2015 and 2014 were to customers in the following geographic regions:
Years Ended September 30, | ||||||||
2016 | 2015 | 2014 | ||||||
United States | 17 | % | 24 | % | 21 | % | ||
Other | 3 | % | 2 | % | — | % | ||
Total Americas | 20 | % | 26 | % | 21 | % | ||
Taiwan | 15 | % | 13 | % | 16 | % | ||
Malaysia | 18 | % | 13 | % | 3 | % | ||
China | 28 | % | 26 | % | 14 | % | ||
Other | 7 | % | 8 | % | 12 | % | ||
Total Asia | 68 | % | 60 | % | 45 | % | ||
Germany | 3 | % | 5 | % | 16 | % | ||
Other | 9 | % | 9 | % | 18 | % | ||
Total Europe | 12 | % | 14 | % | 34 | % | ||
100 | % | 100 | % | 100 | % | |||
7. Business Segments
Following the Company's acquisition of BTU, an evaluation was conducted of the Company's organizational structure. Beginning with the second quarter of fiscal 2015, the Company made changes to its reportable segments. Prior period amounts have been revised to conform to the current period segment reporting structure. The Company’s three reportable segments are as follows:
Solar - In the Company’s Solar segment, we are a leading supplier of thermal processing systems, including related automation, parts and services, to the solar/photovoltaic industry and also offer PECVD (plasma-enhanced chemical vapor deposition) equipment to the global solar market.
Semiconductor - In the Company’s Semiconductor segment, we design, manufacture, sell and service thermal processing equipment and related controls for use by leading semiconductor manufacturers, and in electronics, automotive and other industries.
Polishing - In the Company's Polishing segment, the Company produces consumables and machinery for lapping (fine abrading) and polishing of materials, such as sapphire substrates, optical components, silicon wafers, numerous types of crystal materials, ceramics and metal components.
On December 24, 2014, the Company acquired a 51% controlling interest in SoLayTec, and on January 30, 2015, the Company completed its acquisition of BTU. Beginning in the second quarter of 2015, SoLayTec’s business is included in the results for the solar segment, and BTU’s business is included in the results for the semiconductor segment. See Note 13, “Acquisitions”, for additional information with respect to the Company’s recent acquisitions.
Information concerning our business segments is as follows:
65
Years ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Net revenue: | |||||||||||
Solar* | $ | 60,946 | $ | 56,689 | $ | 36,069 | |||||
Semiconductor | 50,637 | 37,250 | 9,779 | ||||||||
Polishing | 8,725 | 10,944 | 10,653 | ||||||||
$ | 120,308 | $ | 104,883 | $ | 56,501 | ||||||
Operating income (loss): | |||||||||||
Solar* | $ | (6,696 | ) | $ | (5,056 | ) | $ | (11,010 | ) | ||
Semiconductor | 3,904 | (1,268 | ) | 851 | |||||||
Polishing | 1,588 | 2,250 | 2,805 | ||||||||
Non-segment related | (6,704 | ) | (9,447 | ) | (5,735 | ) | |||||
$ | (7,908 | ) | $ | (13,521 | ) | $ | (13,089 | ) | |||
* The financial statement of business units included in the Solar segment include some sales of equipment and parts to the semiconductor, silicon wafer and MEMS industries, comprising less than 25% of the Solar segment revenue
Years ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Capital expenditures: | |||||||||||
Solar | $ | 235 | $ | 411 | $ | 282 | |||||
Semiconductor | 692 | 136 | 110 | ||||||||
Polishing | 51 | 63 | 70 | ||||||||
$ | 978 | $ | 610 | $ | 462 | ||||||
Depreciation and amortization expense: | |||||||||||
Solar | $ | 2,014 | $ | 2,940 | $ | 2,236 | |||||
Semiconductor | 870 | 318 | 40 | ||||||||
Polishing | 90 | 99 | 134 | ||||||||
$ | 2,974 | $ | 3,357 | $ | 2,410 | ||||||
September 30, 2016 | September 30, 2015 | ||||||
(dollars in thousands) | |||||||
Identifiable assets: | |||||||
Solar | $ | 42,962 | $ | 45,717 | |||
Semiconductor | 51,985 | 46,912 | |||||
Polishing | 4,819 | 5,793 | |||||
Non-segment related | 18,664 | 27,034 | |||||
$ | 118,430 | $ | 125,456 | ||||
Goodwill: | |||||||
Solar | $ | 5,328 | $ | 5,344 | |||
Semiconductor | 5,063 | 4,463 | |||||
Polishing | 728 | 728 | |||||
$ | 11,119 | $ | 10,535 | ||||
66
8. Geographic Regions
The Company has operations in The Netherlands, United States, France and China. Revenues, operating income (loss) and identifiable assets by geographic region are as follows:
Years Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Net revenue: | |||||||||||
The Netherlands | $ | 52,189 | $ | 46,982 | $ | 31,779 | |||||
United States | 44,299 | 37,483 | 20,433 | ||||||||
France | 8,758 | 8,387 | 4,218 | ||||||||
China | 11,799 | 9,725 | 71 | ||||||||
Other | 3,263 | 2,306 | — | ||||||||
$ | 120,308 | $ | 104,883 | $ | 56,501 | ||||||
Operating income (loss): | |||||||||||
The Netherlands | $ | (7,773 | ) | $ | (9,069 | ) | $ | (9,403 | ) | ||
United States | (1,396 | ) | (5,541 | ) | (207 | ) | |||||
France | (783 | ) | (330 | ) | (611 | ) | |||||
China | 1,530 | 986 | (2,868 | ) | |||||||
Other | 514 | 433 | — | ||||||||
$ | (7,908 | ) | $ | (13,521 | ) | $ | (13,089 | ) | |||
As of September 30, | |||||||||||
2016 | 2015 | ||||||||||
Net long-lived assets (excluding intangibles and goodwill) | |||||||||||
The Netherlands | $ | 4,996 | $ | 6,677 | |||||||
United States | 10,171 | 10,162 | |||||||||
France | 241 | 346 | |||||||||
China | 552 | 576 | |||||||||
$ | 15,960 | $ | 17,761 | ||||||||
9. Income Taxes
The components of income (loss) before provision for income taxes are as follows:
Year Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Domestic | $ | 2,100 | $ | 94 | $ | 278 | |||||
Foreign | (7,550 | ) | (4,901 | ) | (13,327 | ) | |||||
$ | (5,450 | ) | $ | (4,807 | ) | $ | (13,049 | ) | |||
67
The components of the provision (benefit) for income taxes are as follows:
Year Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Current: | |||||||||||
Domestic Federal | $ | 530 | $ | (320 | ) | $ | 370 | ||||
Foreign | 500 | 500 | 530 | ||||||||
Foreign withholding taxes | 280 | 1,240 | — | ||||||||
Domestic state | 110 | — | 80 | ||||||||
Total current | 1,420 | 1,420 | 980 | ||||||||
Deferred: | |||||||||||
Domestic Federal | 1,680 | 720 | (490 | ) | |||||||
Foreign | — | (210 | ) | 750 | |||||||
Domestic state | — | (20 | ) | — | |||||||
Total deferred | 1,680 | 490 | 260 | ||||||||
Total provision | $ | 3,100 | $ | 1,910 | $ | 1,240 | |||||
A reconciliation of actual income taxes to income taxes at the expected United States federal corporate income tax rate of thirty-four percent is as follows:
Year Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Tax benefit at the U.S. rate | $ | (1,890 | ) | $ | (1,630 | ) | $ | (4,440 | ) | ||
Effect of permanent book-tax differences | 1,120 | (1,570 | ) | 30 | |||||||
State tax provision | 110 | (40 | ) | 80 | |||||||
Valuation allowance for net deferred tax assets | 2,690 | 2,490 | 3,900 | ||||||||
Uncertain tax items | 350 | 330 | 370 | ||||||||
Foreign tax rate differential | 1,050 | 1,890 | 1,000 | ||||||||
Other items | (330 | ) | 440 | 300 | |||||||
$ | 3,100 | $ | 1,910 | $ | 1,240 | ||||||
68
Deferred income taxes reflect the tax effects of temporary differences between the carrying value of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. The tax effects of temporary book-tax differences that give rise to significant portions of the deferred tax assets and deferred tax liability are as follows:
Year Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Deferred tax assets - current: | |||||||||||
Capitalized inventory costs | $ | 270 | $ | 340 | $ | 230 | |||||
Inventory write-downs | 2,460 | 4,840 | 950 | ||||||||
Accrued warranty | 160 | 280 | 180 | ||||||||
Deferred profits | 1,180 | 1,180 | 1,460 | ||||||||
Accruals and reserves not currently deductible | 1,720 | 1,920 | 520 | ||||||||
Deferred tax assets - current | $ | 5,790 | $ | 8,560 | $ | 3,340 | |||||
Valuation allowance | (5,790 | ) | (6,510 | ) | (2,280 | ) | |||||
Deferred tax assets - current, net of valuation allowance | $ | — | $ | 2,050 | $ | 1,060 | |||||
Deferred tax assets (liabilities)- non-current: | |||||||||||
Stock option expense | $ | 890 | $ | 680 | $ | 670 | |||||
Book vs. tax basis of acquired assets | (1,340 | ) | (1,350 | ) | (1,210 | ) | |||||
Federal net operating loss carryforwards | 3,370 | 5,570 | 900 | ||||||||
Foreign and state net operating losses | 13,200 | 10,550 | 8,070 | ||||||||
Book vs. tax depreciation and amortization | (2,200 | ) | (2,030 | ) | (10 | ) | |||||
Foreign tax credits | 4,230 | 3,950 | — | ||||||||
Other deferred tax assets | 570 | 360 | 2,950 | ||||||||
Total deferred tax assets - non-current | 18,720 | 17,730 | 11,370 | ||||||||
Valuation allowance | (18,520 | ) | (17,300 | ) | (10,070 | ) | |||||
Deferred tax assets (liabilities) - non-current, net of valuation allowance | $ | 200 | $ | 430 | $ | 1,300 | |||||
Changes in the deferred tax valuation allowance are as follows:
Year Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Balance at the beginning of the year | $ | 23,810 | $ | 12,350 | $ | 8,450 | |||||
Additions to valuation allowance | 500 | 11,460 | 3,900 | ||||||||
Balance at the end of the year | $ | 24,310 | $ | 23,810 | $ | 12,350 | |||||
The deferred tax valuation allowance increased by $0.5 million and $11.5 million for the years ended September 30, 2016 and 2015, respectively. A significant portion of the 2015 increase is related to the acquisition of BTU. In assessing the realizability of deferred tax assets, the Company considers whether it is more likely than not that some portion or all of the deferred tax assets will be realized. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income during the periods in which those temporary differences become deductible. The Company considers the scheduled reversal of deferred tax liabilities, projected future income, and tax planning strategies in making this assessment. We have established valuation allowances on substantially all net deferred tax assets, after considering all of the available objective evidence, both positive and negative, historical and prospective, with greater weight given to historical evidence, and determined it is not more likely than not that these assets will be realized.
The Company has federal net operating loss carryforwards of approximately $14.0 million that expire at various times between 2024 and 2036. In addition, the Company has approximately $3.6 million of foreign tax credits that expire at
69
various times through 2025. The utilization of those federal net operating losses and foreign tax carryforwards are limited to approximately $0.8 million per year. The company also has foreign net operating loss carryforwards of approximately $47.3 million which expire at various times through 2025. The Company also has approximately $7.5 million of state net operating loss carryforwards.
The Company’s historical and continuing policy is that its undistributed foreign earnings are indefinitely reinvested and, accordingly, no related provision for U.S. federal and state income taxes has been provided on the undistributed foreign earnings at September 30, 2016. The amount of taxes attributable to these undistributed earnings is immaterial.
The Company applies the provisions of FASB Interpretation No. 48 (“FIN 48”), “Accounting for Uncertainty in Income Taxes”, (now codified as FASB ASC 740, “Income Tax”). In this regard, an uncertain tax position represents the Company's expected treatment of a tax position taken in a filed tax return, or planned to be taken in a future tax return, that has not been reflected in measuring income tax expense for financial reporting purposes. Approximately $1.7 million of this total represents the amount that, if recognized, would favorably affect our effective income tax rate in future periods.
A reconciliation of the beginning and ending amount of our unrecognized tax benefits is summarized as follows:
Year Ended September 30, | |||||||||||
2016 | 2015 | 2014 | |||||||||
(dollars in thousands) | |||||||||||
Balance at beginning of the year | $ | 3,510 | $ | 3,180 | $ | 2,810 | |||||
Additions related to tax positions taken in prior years | 350 | 330 | 370 | ||||||||
Reductions due to lapse of statute of limitations | — | — | — | ||||||||
Balance at the end of the year | $ | 3,860 | $ | 3,510 | $ | 3,180 | |||||
We have classified all of our liabilities for uncertain tax positions as income taxes payable long-term. Income taxes long-term also includes other items, primarily withholding taxes that are not due until the related intercompany service fees are paid.
We report accrued interest and penalties related to unrecognized tax benefits in income tax expense. We recognized a net expense for interest and penalties of $0.4 million, $0.3 million, and $0.4 million for fiscal years 2016, 2015 and 2014 respectively. Income taxes payable long-term on the Consolidated Balance Sheets includes a cumulative accrual for potential interest and penalties of $2.3 million and $1.8 million as of September 30, 2016 and 2015, respectively.
The Company does not expect that the amount of our tax reserves for uncertain tax positions will materially change in the next 12 months other than the continued accrual of interest and penalties.
The Company and one or more of its subsidiaries file income tax returns in The Netherlands, Germany, France, China and other foreign jurisdictions, as well as the U.S. and various states in the U.S. We have not signed any agreements with the Internal Revenue Service, any state or foreign jurisdiction to extend the statute of limitations for any fiscal year. As such, the number of open years is the number of years dictated by statute in each of the respective taxing jurisdictions, but generally is from 3 to 5 years.
These open years contain certain matters that could be subject to differing interpretations of applicable tax laws and regulations as they relate to the amount, timing, or inclusion of revenues and expenses, or the sustainability of income tax positions of the Company and its subsidiaries.
70
10. Restructuring Charges
The company recorded a net charge of $0.6 million for the year ended September 30, 2015, which is reported in restructuring and other charges in the consolidated statement of operations, for employee related costs, including costs for severance related to the BTU acquisition.
11. Selected Quarterly Data (Unaudited)
First Quarter | Second Quarter | Third Quarter | Fourth Quarter | ||||||||||||
Fiscal Year 2016: | (in thousands, except per share amounts) | ||||||||||||||
Revenue | $ | 22,074 | $ | 22,483 | $ | 33,342 | $ | 42,409 | |||||||
Gross margin | $ | 5,955 | $ | 6,001 | $ | 9,631 | $ | 12,476 | |||||||
Provision for income taxes | $ | 300 | $ | 1,670 | $ | 70 | $ | 1,060 | |||||||
Net income (loss) attributable to Amtech Systems, Inc. | $ | (4,015 | ) | $ | (1,499 | ) | $ | (1,209 | ) | $ | (285 | ) | |||
Comprehensive income (loss) attributable to Amtech Systems, Inc. | $ | (4,550 | ) | $ | (909 | ) | $ | (1,483 | ) | $ | (276 | ) | |||
Net income (loss) per share attributable to Amtech Systems, Inc.: | |||||||||||||||
Basic earnings per share | $ | (0.31 | ) | $ | (0.11 | ) | $ | (0.09 | ) | $ | (0.02 | ) | |||
Shares used in calculation | 13,152 | 13,169 | 13,173 | 13,177 | |||||||||||
Diluted earnings per share | $ | (0.31 | ) | $ | (0.11 | ) | $ | (0.09 | ) | $ | (0.02 | ) | |||
Shares used in calculation | 13,152 | 13,169 | 13,173 | 13,177 | |||||||||||
Fiscal Year 2015: | (in thousands, except per share amounts) | ||||||||||||||
Revenue | $ | 12,396 | $ | 24,273 | $ | 40,016 | $ | 28,198 | |||||||
Gross margin | $ | 3,428 | $ | 6,889 | $ | 10,128 | $ | 6,563 | |||||||
Provision for income taxes | $ | 180 | $ | 170 | $ | 290 | $ | 1,270 | |||||||
Net income (loss) attributable to Amtech Systems, Inc. | $ | (5,195 | ) | $ | (2,321 | ) | $ | (1,604 | ) | $ | 1,349 | ||||
Comprehensive income (loss) attributable to Amtech Systems, Inc. | $ | (6,247 | ) | $ | (4,470 | ) | $ | (1,344 | ) | $ | 1,414 | ||||
Net income (loss) per share attributable to Amtech Systems, Inc.: | |||||||||||||||
Basic earnings per share | $ | (0.53 | ) | $ | (0.19 | ) | $ | (0.12 | ) | $ | 0.10 | ||||
Shares used in calculation | 9,854 | 11,997 | 13,103 | 13,150 | |||||||||||
Diluted earnings per share | $ | (0.53 | ) | $ | (0.19 | ) | $ | (0.12 | ) | $ | 0.10 | ||||
Shares used in calculation | 9,854 | 11,997 | 13,103 | 13,259 | |||||||||||
12. Long-term Debt
In January 2015, the Company acquired $7.2 million of long-term debt as part of the BTU acquisition. The debt acquired is a mortgage note secured by its real property in Billerica, Massachusetts, and has a remaining balance of $6.5 million as of September 30, 2016. The debt was refinanced in September 2016 with an interest rate of 4.11% through September 26, 2021, at which time the interest rate will be adjusted to a per annum fixed rate equal to the aggregate of the Federal Home Loan Board Five Year Classic Advance Rate plus two hundred forty basis points. The maturity date of the debt is September 26, 2023.
In December 2014, the Company acquired long term debt as part of the SoLayTec acquisition. During the year ended September 30, 2016, SoLayTec borrowed an additional $1.1 million. As of September 30, 2016 the debt has a remaining
71
balance of $3.7 million. The debt has interest rates ranging from 4.50% to 10% and maturity dates ranging from fiscal 2017 to fiscal 2021.
Annual maturities relating to the Company's long-term debt as of September 30, 2016 are as follows:
Annual Maturities | |||
(in thousands) | |||
2017 | $ | 1,134 | |
2018 | 932 | ||
2019 | 1,065 | ||
2020 | 365 | ||
2021 | 382 | ||
Thereafter | 6,353 | ||
Total | $ | 10,231 | |
13. Acquisitions
Acquisition of BTU International, Inc.
On January 30, 2015, the Company completed its acquisition of BTU (the "Merger"). In connection with the Merger, each share of BTU common stock outstanding immediately prior to the effective time of the Merger, including BTU restricted stock units that vested immediately prior to the effective time of the Merger, was converted to 0.3291 shares of common stock of the Company. The Company issued 3,185,852 shares of Company common stock on the Merger date. Pursuant to the terms of the Merger Agreement, options to purchase BTU common stock held by BTU employees were assumed by the Company and converted into options to purchase shares of Company common stock on substantially the same terms and conditions as were applicable to such BTU stock options, with appropriate adjustments based upon the exchange ratio of 0.3291 to the exercise price and the number of shares of Company common stock subject to such stock option. As a result of the Merger, the company owns 100% of the outstanding stock of BTU.
The following unaudited pro forma data has been prepared as if the acquisition of BTU occurred on October 1, 2013 and includes adjustments for depreciation expense, amortization of intangibles, and the effect of other purchase accounting adjustments. In addition, the unaudited pro forma consolidated results do not purport to project the future results of operations of the combined company nor do they reflect the expected realization of any cost savings associated with the acquisition.
Years Ended (unaudited) | ||||||||
September 30, 2015 | September 30, 2014 | |||||||
(dollars in thousands, except per share data) | ||||||||
Revenue, net | $ | 121,186 | $ | 111,531 | ||||
Net loss | $ | (9,223 | ) | $ | (15,586 | ) | ||
Earnings per share available to Amtech stockholders: | ||||||||
Basic | $ | (0.70 | ) | $ | (1.21 | ) | ||
Diluted | $ | (0.70 | ) | $ | (1.21 | ) | ||
The Merger was an all-stock transaction. The following table summarizes the consideration transferred:
72
(In thousands, except per share amounts) | |||
BTU common shares and restricted stock units exchanged | 9,681 | ||
Exchange ratio | 0.3291 | ||
Amtech common stock issued for consideration | 3,186 | ||
Amtech common stock per share price on January 30, 2015 | $ | 8.20 | |
Consideration for BTU common shares and restricted stock units | $ | 26,125 | |
Vested BTU stock options exchanged for Amtech stock options | $ | 500 | |
Total fair value of consideration transferred | $ | 26,625 | |
The following table summarizes the allocation of the consideration for the assets acquired and liabilities assumed on January 30, 2015, including the effects of measurement period adjustments recorded in fiscal 2016:
(In thousands) | Initial Estimate | Adjustments | Final Allocation | ||||||
Fair value of net tangible assets acquired | $ | 19,232 | $ | (600 | ) | $ | 18,632 | ||
Goodwill | 4,463 | 600 | 5,063 | ||||||
Identifiable intangible assets | 2,930 | — | 2,930 | ||||||
Total consideration allocated | $ | 26,625 | $ | — | $ | 26,625 | |||
Refer to Note 1 "Summary of Significant Accounting Policies" for additional information on Goodwill and Intangible Assets.
Under the guidance on accounting for business combinations, merger and integration costs are not included as components of consideration transferred but are accounted for as expenses in the period in which the costs are incurred. Transaction-related expenses of $4.0 million and $1.3 million for fiscal 2015 and 2014, respectively, are included in the Selling, General and Administrative line in the Consolidated Statements of Operations.
Acquisition of SoLayTec B.V.
On December 24, 2014, the Company expanded our participation in the solar market by acquiring a 51% controlling interest in SoLayTec, which provides ALD systems used in high efficiency solar cells, for a total purchase price consideration of $1.9 million. The Company consolidated the results of operations for SoLayTec beginning on December 24, 2014, the effective date of the acquisition, which were not material to our consolidated statement of operations for fiscal 2015.
14. Deconsolidation
In fiscal 2015, the Company deconsolidated Kingstone, eliminating the assets, liabilities and non-controlling interests recorded for Kingstone from the Company's Consolidated Balance Sheet, thereby reducing its ownership to 15% of the Hong Kong holding company. In fiscal 2015, the Company recorded a gain of $8.8 million as a result of the deconsolidation. The gain was computed as follows: the fair value of consideration received, plus the fair values of the retained non-controlling interest and the sales and service rights, less the carrying value of Kingstone's net assets. Based on the terms of the transaction agreements, in fiscal 2016, the Company received a payment of $4.9 million from Kingstone for its exclusive sale and service rights in the solar ion implant equipment. The Company recognized a gain on the sale of $2.6 million for the year ended September 30, 2016, which is included in our Consolidated Statement of Operations in Gain on sale of other assets.
The Company's remaining investment in Kingstone is accounted for using the equity method for periods subsequent to the deconsolidation due to the Company's ability to exert significant influence over the financial and operating policies of Kingstone, primarily through our representation on the board of directors. See Note 15 - Investment for additional details.
73
15. Investments
As discussed in Note 14 "Deconsolidation", on September 16, 2015, the Company deconsolidated Kingstone, reducing its ownership to 15% of the Hong Kong holding company. The Company's investment in Kingstone is accounted for using the equity method for periods subsequent to the deconsolidation due to the Company's ability to exert significant influence over the financial and operating policies of Kingstone, primarily through our representation on the board of directors. The Company recognizes its portion of net income or losses on a one-quarter lag. The resulting equity method investment was initially recorded at fair value at $2.7 million using the value the third party purchaser placed on their investment in Kingstone Shanghai, a Level 2 input in the fair value hierarchy. The carrying value of the equity method investment in Kingstone was $3.0 million and $2.7 million as of September 30, 2016 and 2015, respectively.
As of September 30, 2016, the Company's carrying value of Kingstone exceeded its share of the underlying equity in the net assets by approximately $2.7 million. In accordance with ASC Topic 323, Investments - Equity Method, the difference (the “ basis difference”) between the initial fair value of the Company’s investment and the proportional interest in the underlying net assets of Kingstone was accounted for using the acquisition method of accounting, which requires that the basis difference be allocated to the identifiable assets and liabilities of Kingstone at fair value and based upon the Company’s proportionate ownership. Determining the fair value of assets and liabilities is judgmental in nature and involves the use of significant estimates and assumptions. During the fourth quarter of 2016, the Company completed its valuation of the identifiable assets to which the basis is attributable and recorded amortization based on this valuation for the year ended September 30, 2016.
16. Related Party Transactions
Parties are considered to be related if one party has the ability, directly or indirectly, to control the other party or exercise significant influence over the other party in making financial and operating decisions. Parties are also considered to be related if they are subject to common control or significant influence, such as a family member or relative, stockholder, or a related corporation.
In the fourth quarter of 2015, the Company deconsolidated Kingstone, reducing its ownership to 15% of Kingstone Hong Kong , the Hong Kong holding company. Upon the deconsolidation, Kingstone became a related party of the Company. Based on the terms of the transaction agreements in the second quarter of 2016, the Company received a payment of $4.9 million from Kingstone for its exclusive sale and service rights in the solar ion implant equipment. The Company recognized a gain on the sale of $2.6 million for the year ended September 30, 2016, which is included in our Consolidated Statement of Operations in Gain on sale of other assets. At September 30, 2016, the Company's related accounts receivable due from Kingstone were $0.3 million, which are included in Accounts Receivable on the Consolidated Balance Sheet.
As of September 30, 2016, SoLayTec has borrowed approximately $1.1 million from its shareholder, TNO Technostarters B.V.. The loans have varying interest rates from 9.5% to 12.5% and matures in 2021.
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
None.
ITEM 9A. CONTROLS AND PROCEDURES
Conclusion Regarding the Effectiveness of Disclosure Controls and Procedures
Our management, including our Chief Executive Officer (“CEO”) and Chief Financial Officer (“CFO”), has carried out an evaluation of the effectiveness of our disclosure controls and procedures as defined in Exchange Act Rules 13a-15(e) and 15(d)-15(e). Based upon that evaluation, our CEO and CFO have concluded that our disclosure controls and procedures in place were effective as of September 30, 2016.
74
Management’s Report on Internal Control Over Financial Reporting
To the Shareholders of Amtech Systems, Inc.
The management of Amtech Systems, Inc. is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.
Because of its inherent limitations, our controls and procedures may not prevent or detect misstatements. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the controls system are met. Because of the inherent limitations in all controls systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, have been detected.
Our management evaluated the effectiveness of our internal control over financial reporting as of September 30, 2016. In making this evaluation, we used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control - Integrated Framework (2013). Based on our evaluation we believe that, as of September 30, 2016, our internal control over financial reporting is effective based on those criteria.
The Company’s independent registered public accounting firm, Mayer Hoffman McCann P.C., has issued an audit report on the Company’s internal control over financial reporting.
75
ITEM 9B. OTHER INFORMATION
None.
PART III
Pursuant to Paragraph G(3) of the General Instructions to Form 10-K, the information required by Part III of Form 10-K is incorporated by reference to Amtech’s Definitive Proxy Statement to be filed with the Securities and Exchange Commission in connection with its 2016 Annual Meeting of Stockholders (the “Proxy Statement”) to be filed within 120 days of this filing. In the event the Proxy Statement will not be filed within 120 days, the information required by Part III of this Form 10-K will be filed pursuant to an amendment to this annual report on Form 10-K within the 120 day period.
ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND GOVERNANCE
The information required by this item (i) is incorporated herein by reference to the Proxy Statement or (ii) will be filed pursuant to an amendment to this annual report on Form 10-K, in each case, within 120 days of this filing.
ITEM 11. EXECUTIVE COMPENSATION
The information required by this item (i) is incorporated herein by reference to the Proxy Statement or (ii) will be filed pursuant to an amendment to this annual report on Form 10-K, in each case, within 120 days of this filing.
ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
The information required by this item (i) is incorporated herein by reference to the Proxy Statement or (ii) will be filed pursuant to an amendment to this annual report on Form 10-K, in each case, within 120 days of this filing.
ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE
The information required by this item (i) is incorporated herein by reference to the Proxy Statement or (ii) will be filed pursuant to an amendment to this annual report on Form 10-K, in each case, within 120 days of this filing.
ITEM 14. PRINCIPAL ACCOUNTING FEES AND SERVICES
The information required by this item (i) is incorporated herein by reference to the Proxy Statement or (ii) will be filed pursuant to an amendment to this annual report on Form 10-K, in each case, within 120 days of this filing.
PART IV
ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
(a)(1) | The consolidated financial statements required by this item are set forth on the pages indicated at Item 8. | ||
(2 | ) | All financial statement schedules are omitted because they are either not applicable, or because the required information is shown in the consolidated financial statements or notes thereto. | |
(3 | ) | Exhibits: The response to this section of Item 15 is included in the Exhibit Index of this annual report on Form 10-K and is incorporated herein by reference. | |
76
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, as amended, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
AMTECH SYSTEMS, INC. | |||
November 30, 2016 | By: | /s/ Robert T. Hass | |
Robert T. Hass, , Executive Vice President - | |||
Finance and Chief Financial Officer | |||
77
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, this report on Form 10-K has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated:
SIGNATURE | TITLE | DATE | ||
* | Executive Chairman and | November 30, 2016 | ||
Jong S. Whang | Chairman of the Board | |||
* | Chief Executive Officer | November 30, 2016 | ||
Fokko Pentinga | and President | |||
(Principal Executive Officer) | ||||
/s/ Robert T. Hass | Executive Vice President – Finance and Chief Financial Officer | November 30, 2016 | ||
Robert T. Hass | (Principal Financial and Accounting Officer) | |||
* | Director | November 30, 2016 | ||
Robert M. Averick | ||||
* | Director | November 30, 2016 | ||
Michael Garnreiter | ||||
* | Director | November 30, 2016 | ||
Paul J. van der Wansem | ||||
* | Director | November 30, 2016 | ||
Egbert J.G. Goudena | ||||
* | Director | November 30, 2016 | ||
Robert F. King | ||||
* | Director | November 30, 2016 | ||
Sukesh Mohan | ||||
*By: /s/ Robert T. Hass | ||||
Robert T. Hass, Attorney-In-Fact** | ||||
**By authority of the power of attorney filed as Exhibit 24 hereto. | ||||
78
EXHIBIT INDEX
EXHIBIT NO. | DESCRIPTION | METHOD OF FILING | |||
2.1 | Agreement and Plan of Merger, dated October 21, 2014, by and among Amtech Systems, Inc., BTU Merger Sub, Inc., and BTU International, Inc. | A | |||
3.1 | Amended and Restated Articles of Incorporation, as amended through February 6, 2012. | B | |||
3.2 | Certificate of Designations, Preferences and Privileges of the Series A Convertible Preferred Stock (Par Value $.01 Per Share) of Amtech Systems, Inc., dated as of April 21, 2005. | C | |||
3.3 | Amended and Restated Bylaws of Amtech Systems, Inc., dated as of January 4, 2008. | D | |||
3.4 | First Amendment to the Company’s Amended and Restated Bylaws, dated January 30, 2015. | E | |||
4.1 | Second Amended and Restated Rights Agreement, dated as of October 1, 2015, by and between Amtech Systems, Inc. and Computershare Trust Company, N.A. | F | |||
4.2 | Form of Accredited Investor Subscription Agreement for the Series A Convertible Preferred Stock. | C | |||
10.1 | Amtech Systems, Inc. 1998 Stock Option Plan, as amended through March 29, 2002. | G | |||
10.2 | Non-Employee Directors Stock Option Plan, effective July 8, 2005 as amended through May 8, 2014. | H | |||
10.3 | 2007 Employee Stock Incentive Plan of Amtech Systems, Inc., as amended, effective April 9, 2015. | I | |||
10.4 | Second Amended and Restated Employment Agreement between Amtech Systems, Inc. and Jong S. Whang, dated February 9, 2012. | B | |||
10.5 | Amendment, dated as of July 1, 2012, to the Second Amended and Restated Employment Agreement between Amtech Systems, Inc. and Jong S. Whang, dated as of February 9, 2012. | J | |||
10.6 | Employment Agreement between Amtech Systems, Inc. and Fokko Pentinga, dated June 29, 2012. | K | |||
10.7 | Amendment, dated as of July 1, 2012, to the Employment Agreement between Amtech Systems, Inc. and Fokko Pentinga, dated as of June 29, 2012. | J | |||
10.8 | Second Amendment, dated June 28, 2013, to the Second Amended and Restated Employment Agreement between Amtech Systems, Inc. and Jong S. Whang, dated as of February 9, 2012. | L | |||
10.9 | Second Amendment, dated June 28, 2013, to the Employment Agreement between Amtech Systems, Inc. and Fokko Pentinga, dated as of June 29, 2012. | L | |||
10.10 | Employment Agreement, dated October 21, 2014, by and between Paul J. van der Wansem and the Company. | M | |||
10.11 | Consulting Agreement, dated October 21, 2014, by and between Paul J. van der Wansem and the Company. | M | |||
10.12 | Fourth Amendment to Employment Agreement between Amtech Systems, Inc. and Jong S. Whang, dated April 9, 2015. | N | |||
10.13 | Fourth Amendment to Employment Agreement between Amtech Systems, Inc. and Fokko Pentinga, dated April 9, 2015. | N | |||
10.14 | Employment Agreement between Amtech Systems, Inc. and Bradley C. Anderson, dated April 9, 2015. | N | |||
10.15 | Investment Agreement regarding Shanghai Kingstone Semiconductor Company, Ltd., dated July 17, 2015, by and between Kingstone Technology Hong Kong Limited and Suzhou Zhou Jing Investment Center (LP). | O+ | |||
10.16 | Fifth Amendment to Employment Agreement, dated November 19, 2015, by and between the Company and Jong S. Whang. | Q | |||
10.17 | Second Amendment to Employment Agreement, dated March 10, 2016, by and between Amtech Systems, Inc. and Bradley C. Anderson. | R | |||
10.18 | Key Terms for Robert Hass Employment Agreement, dated February 22, 2016, by and between Amtech Systems, Inc. and Robert T. Hass. | R | |||
79
10.19 | Fifth Amendment to Employment Agreement, dated November 10, 2016, between Amtech Systems, Inc. and Fokko Pentinga. | S | |||
10.20 | Terms of Employment for Robert T. Hass, dated November 10, 2016, between Amtech Systems, Inc. and Robert T. Hass. | T | |||
10.21 | Change of Control and Severance Agreement dated November 10, 2016, between Amtech Systems, Inc. and Robert T. Hass. | U | |||
21.1 | Subsidiaries of the Registrant | * | |||
23.1 | Consent of Independent Registered Public Accounting Firm - Mayer Hoffman McCann P.C. | * | |||
24.1 | Powers of Attorney | * | |||
31.1 | Certification Pursuant to Rule 13a-14(a)/15d-14(a) of the Securities Exchange Act of 1934, as Amended | * | |||
31.2 | Certification Pursuant to Rule 13a-14(a)/15d-14(a) of the Securities Exchange Act of 1934, as Amended | * | |||
32.1 | Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 | * | |||
32.2 | Certification Pursuant to 18 U.S.C. Section 1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 | * | |||
99.1 | Letter Agreement, dated October 8, 2015, by and between the Company and the Joint Filers. | P | |||
101.INS | XBRL Instance Document | * | |||
101.SCH | XBRL Taxonomy Extension Schema Document | * | |||
101.PRE | Taxonomy Presentation Linkbase Document | * | |||
101.CAL | XBRL Taxonomy Calculation Linkbase Document | * | |||
101.LAB | XBRL Taxonomy Label Linkbase Document | * | |||
101.DEF | XBRL Taxonomy Extension Definition Linkbase Document | * | |||
____________________
80
+ | This agreement is written in both the English and Chinese languages, and both versions are equally binding pursuant to the agreement. The English version was filed with the SEC and the Chinese language version is available from the Company upon request. | ||
* | Filed herewith. | ||
A | Pursuant to applicable securities laws and regulations, the Company is deemed to have complied with the reporting obligation relating to the submission of interactive data files in such exhibits and is not subject to liability under any anti-fraud provisions or other liability provisions of the federal securities laws as long as the Company has made a good faith attempt to comply with the submission requirements and promptly amends the interactive data files after becoming aware that the interactive data files fail to comply with the submission requirements. In addition, users of this data are advised that, pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933 or Section 18 of the Securities Exchange Act of 1934 and otherwise are not subject to liability under these sections. | ||
B | Incorporated by reference to Amtech’s Quarterly Report on Form 10-Q for the quarterly period ended December 31, 2011. | ||
C | Incorporated by reference to Amtech’s Current Report on Form 8-K filed with the Securities and Exchange Commission on April 28, 2005. | ||
D | Incorporated by reference to Amtech’s Current Report on Form 8-K filed with the Securities and Exchange Commission on January 8, 2008. | ||
E | Incorporated by reference to Amtech’s Current Report on Form 8-K filed with the SEC on February 2, 2015. | ||
F | Incorporated by reference to Amtech’s Current Report on Form 8-K filed with the Securities and Exchange Commission on October 5, 2015. | ||
G | Incorporated by reference to Amtech’s Form S-8 Registration Statement (related to the 1998 Stock Option Plan), filed with the Securities and Exchange Commission on February 11, 2003. | ||
H | Incorporated by reference to Amtech’s Current Report on Form 8-K filed with the Securities and Exchange Commission on May 14, 2014. | ||
I | Incorporated by reference to Exhibit 10.4 to Amtech’s Current Report on Form 8-K filed with the SEC on April 10, 2015. | ||
J | Incorporated by reference to Amtech’s Quarterly Report on Form 10-Q for the quarterly period ended June 30, 2012. | ||
K | Incorporated by reference to Amtech’s Current Report on Form 8-K filed with the Securities and Exchange Commission on July 6, 2012. | ||
L | Incorporated by reference to Amtech’s Quarterly Report on Form 10-Q for the quarterly period ended June 30, 2013. | ||
M | Incorporated herein by reference to the Company’s Current Report on Form 8-K filed with the SEC on February 2, 2015. | ||
N | Incorporated herein by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K filed with the SEC on April 10, 2015. | ||
O | Incorporated by reference to Amtech’s Quarterly Report on Form 10-Q for the quarterly period ended June 30, 2015. | ||
P | Incorporated by reference to Amtech's Current Report on Form 8-K filed with the Securities and Exchange Commission on October 8, 2015. | ||
Q | Incorporated herein by reference to Exhibit 10.1 to Amtech’s Current Report on Form 8-K filed with the SEC on November 19, 2016. | ||
R | Incorporated herein by reference to Exhibit 10.1 to Amtech’s Quarterly Report on Form 10-Q filed with the SEC on May 5, 2016. | ||
S | Incorporated herein by reference to Exhibit 10.1 on Form 8-K filed with the Securities and Exchange Commission on November 16, 2016. | ||
T | Incorporated herein by reference to Exhibit 10.2 on Form 8-K filed with the Securities and Exchange Commission on November 16, 2016. | ||
U | Incorporated herein by reference to Exhibit 10.3 on Form 8-K filed with the Securities and Exchange Commission on November 16, 2016. | ||
81