APPLIED OPTOELECTRONICS, INC. - Annual Report: 2020 (Form 10-K)

Forward-Looking Information 

This Annual Report on Form 10-K ("Form 10-K") contains forward-looking statements that are based on our management’s beliefs and assumptions and on information currently available to our management, including statements appearing under the heading, “Management’s Discussion and Analysis of Financial Condition and Results of Operations”. The statements contained in this Form 10-K that are not purely historical are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, Section 27A of the Securities Act of 1933, as amended, or the Securities Act, and Section 21E of the Securities Exchange Act of 1934, as amended, or the Exchange Act. In some cases, you can identify forward-looking statements by terminology such as ‘‘may,’’ ‘‘will,’’ ‘‘should,’’ ‘‘expects,’’ ‘‘plans,’’ ‘‘anticipates,’’ ‘‘believes,’’ ‘‘estimates,” “strategy,” “future,” “likely,” or “would” or by other similar expressions that convey uncertainty of future events or outcomes.  These forward-looking statements involve risks and uncertainties, as well as assumptions and current expectations, which could cause the Company’s actual results to differ materially from those anticipated in such forward-looking statements. These risks and uncertainties include but are not limited to: statements about reduction in the size or quantity of customer orders; change in demand for the company’s products due to industry conditions; our ability to maintain sufficient liquidity; changes in manufacturing operations; volatility in manufacturing costs; delays in shipments of products; disruptions in the supply chain; change in the rate of design wins or the rate of customer acceptance of new products; the company’s reliance on a small number of customers for a substantial portion of its revenues; pricing pressure; a decline in demand for our customers’ products or their rate of deployment of their products; general conditions in the internet data center, cable television or CATV, telecommunications or telecom and fiber-to-the-home or FTTH; changes in the world economy (particularly in the United States and China); the negative effects of seasonality; the anticipated impact to our business operations, customer demand and supply chain due to the recent global pandemic of a novel strain of the coronavirus (COVID-19); realization of deferred tax assets; and other risks and uncertainties described more fully under the heading “Risk Factors” in this Form 10-K and those discussed in the Company’s other documents filed with or furnished to the Securities and Exchange Commission. You should not rely on forward-looking statements as predictions of future events. All forward-looking statements in this Form 10-K are based upon information available to us as of the date hereof, and qualified in their entirety by this cautionary statement. Except as required by law, we assume no obligation to update forward-looking statements for any reason after the date of this report to conform these statements to actual results or to changes in the company’s expectations.

  PART I 

Item 1. Business

Overview 

Applied Optoelectronics, Inc. (the “Company” or "AOI") is a leading, vertically integrated provider of fiber-optic networking products, primarily for four networking end-markets: internet data center, cable television, ("CATV"), telecommunications, ("telecom"), and fiber-to-the-home ("FTTH"). We design and manufacture a range of optical communications products at varying levels of integration, from components, subassemblies and modules to complete turn-key equipment.

In designing products for our customers, we begin with the fundamental building blocks of lasers and laser components. From these foundational products, we design and manufacture a wide range of products to meet our customers’ needs and specifications, and such products differ from each other by their end market, intended use and level of integration. We are primarily focused on the higher-performance segments within all four of our target markets, which increasingly demand faster connectivity and innovation.

The four end markets we target are all driven by significant bandwidth demand fueled by the growth of network-connected devices, video traffic, cloud computing and online social networking. To address this increased bandwidth demand, CATV and telecom service providers are competing directly against each other by providing bundles of voice, video and data services to their subscribers and investing to enhance the capacity, reliability and capability of their networks. The trend of rising bandwidth consumption also impacts the internet data center market, as reflected in the shift to higher speed server connections. As a result of these trends, fiber-optic networking technology is becoming essential in all four of our target markets, as it is often the only economical way to deliver the desired bandwidth.

The internet data center market is our largest market. Our customers in this market are generally large internet-based (“Web 2.0”) data center operators, to whom we supply optical transceivers that plug into switches and servers within the data center and allow these network devices to send and receive data over fiber-optic cables. The majority of the data center optical transceivers that we sell utilize our own lasers and subassemblies (we refer to the transceivers subassemblies as “light engines”), and we believe that our in-house technology and manufacturing capability for these lasers and subassemblies gives us an advantage over many of our competitors who often lack either development or manufacturing capabilities for these advanced optical modules.

The CATV market is our most established market, for which we supply a broad array of products, including lasers, transmitters and transceivers, and turn-key equipment. Sales of headend, node and distribution equipment have contributed significantly to our revenue in recent years as a result of our ability to meet the needs of CATV equipment vendors who have continued to outsource both the design and manufacturing of this equipment.  As the complexity of CATV networks has increased over the years, equipment vendors, many of whom are our customers, have been under pressure to supply a wider variety of increasingly complex equipment to CATV multiple system operators ("MSOs").  In order to meet these demands, many equipment vendors have looked to engage with suppliers like AOI who have the capability to design and manufacture various network equipment or subassemblies, rather than always developing these devices themselves.  This outsourcing trend has been a significant contributor to the revenue we derive from the CATV market.  We believe that our extensive high-speed optical, mixed-signal semiconductor and mechanical engineering capabilities position us well to continue to benefit from these industry dynamics.

The telecom market is our fastest growing market.  In this market we supply lasers and laser subassemblies as well as transceivers.  Our customers in this segment consist mostly of network equipment manufacturers ("NEMs") and other manufacturers of optical transceivers.  Our NEM customers manufacture equipment used in telecommunications networks and our transceiver manufacturer customers use our lasers and subassemblies in the manufacture of their optical transceivers.  Most of our products in this segment are purchased for use in advanced 5G mobile network deployments.

Our vertically integrated manufacturing model provides us several advantages, including rapid product development, fast response times to customer requests and greater control over product quality and manufacturing costs. We design, manufacture and integrate our own analog and digital lasers using proprietary Molecular Beam Epitaxy, or MBE, and Metal Organic Chemical Vapor Deposition (MOCVD) fabrication process, which we believe is unique in our industry. We manufacture the majority of the laser chips and optical components that are used in our products. The lasers we manufacture are tested extensively to enable reliable operation over time and our devices are often highly tolerant of changes in temperature and humidity, making them well-suited to the CATV, FTTH and 5G markets where networking equipment is often installed outdoors.

In 2020, 2019 and 2018, our revenue was $234.6 million, $190.9 million, and $267.5 million and our gross margin was 21.5%, 24.2%, and 32.8%. In the years ended December 31, 2020, 2019 and 2018, we had net loss of $58.5 million, $66.0 million, and $2.1 million, respectively. At December 31, 2020 and 2019, our accumulated deficit were $88.6 million and $30.1 million, respectively. In 2020, we earned 73.9% of our total revenue from the internet data center market and 16.2% of our total revenue from the CATV market. In 2020, our key customers in the data center market included Microsoft Corp, Amazon.com, a US based large datacenter operator, and  a US based NEM. In 2020, 2019, and 2018, Microsoft accounted for 38.3%, 32.2%, and 22.1% of our revenue, Amazon accounted for 11.5%, 24.0%, and 12.1% of our revenue, the US based large datacenter operator accounted for 8.0%, 0.4%, and 0.0%, and the US based NEM accounted for 7.9%, 1.6%, and 0.0%, respectively. In 2020, our key customers in the CATV market included Cisco Systems, Inc., a global CATV NEM, and CommScope (which in 2019 acquired Arris, who had previously acquired the Motorola Home Business in 2013 and Pace Plc in 2016). In 2020, 2019 and 2018, Cisco accounted for 7.5%, 10.0%, and 9.9% of our revenue, a global CATV NEM accounted for 3.7%, 0%, and 0% of our revenue, and CommScope accounted for 2.1%, 3.7%, and 2.1% of our revenue, respectively.

Industry Background 

During 2020, our four target markets, internet data center, CATV, telecom and FTTH, experienced a significant growth in bandwidth consumption and the corresponding need for network infrastructure improvement to support this growth.

The prevailing trends in our target markets include:

Our Solutions 

We experience certain challenges within our target markets, including continuous pressure to innovate and deliver highly integrated products that perform reliably in harsh, demanding environments and to produce high-quality devices in large volumes at competitive prices.

By addressing the challenges in our target markets, we provide the following benefits to our customers:

Our Strengths 

Our key competitive strengths include the following:

Our Strategy 

We seek to be the leading global provider of optical components, modules and equipment for each of our four target markets: internet data centers, CATV, telecom and FTTH. Our strategy includes the following key elements:

Our Technology 

We believe that we have technology leadership in four key areas: semiconductor laser manufacturing, electronic technologies that enhance the performance of our lasers, optical hybrid integration and mixed-signal semiconductor design.

Our Products 

Our products include an array of optical communications solutions at varying levels of integration. We begin from the fundamental building blocks of lasers and laser components. From these foundational products, we design and manufacture a wide range of products from optical modules to complete turn-key equipment. We design our products to target customers in our identified markets to meet their needs and specifications.

Our components often incorporate one or more of our optical laser chips inside a precision housing that provides mechanical protection as well as standardized electrical contacts. More complex optical components may also include optical filters (for example, for use in WDM) or other optical elements by which optical signals are routed internally within the component. These more advanced components may also include coolers, heaters and sensors that allow the temperature of the laser chip to be measured and controlled. We manufacture the majority of the laser chips and optical components that are used in our own products.

At the next level of integration, our module or sub-assembly products typically contain one or more of our optical components and some additional control circuitry. Examples of modules include our transceiver line primarily used in internet data center markets, telecom markets, and FTTH markets.

At the highest level of integration and complexity, our equipment products typically contain one or more optical components, modules and additional electronic control circuitry required to enable these subsystems to operate independently. For example, our CATV transmitter equipment requires utilization of our optical components and assembly onto a circuit board and to an external housing. Examples of equipment include our CATV transmitter and CATV nodes.

Intellectual Property 

We rely on a combination of patent, copyright, trademark, trade secret laws and unfair competition laws, as well as confidentiality and licensing arrangements, to establish and protect our intellectual property. We employ various methods to protect these intellectual property rights, including maintaining a technological infrastructure with significant security measures, limiting disclosure and restricting access to only those individuals with an operational need for such information, and having employees, consultants and suppliers execute confidentiality agreements with us. While we expect our intellectual property to provide competitive advantages, we also find meaningful value from unpatented proprietary process knowledge, know-how and trade secrets.

Patents 

As of December 31, 2020, we owned a total of 165 U.S. issued patents and 130 patents issued in China and Taiwan, plus a number of pending U.S. and foreign/international patent applications. Our issued U.S. and foreign patents will expire between 2021 and 2041. While our patents are an important element of our success, our business as a whole is not dependent on any one patent or group of patents. We do not anticipate any material effect on our business due to any patents expiring in 2021, and we continue to obtain new patents through our ongoing research and development.

Our portfolio of patents and patent applications covers several different technology families including:

Trademarks 

We have registered the trademarks APPLIED OPTOELECTRONICS, INC., AOI and our logo with the U.S. Patent and Trademark Office on the Principal Register. These marks are also registered in, or have applications for registration pending in, various foreign trademark offices.

Research and Development 

To maintain our growth and competitiveness, we engage in an active research and development program to develop new products and enhance existing products. As a result of these efforts, we anticipate releasing various new or enhanced products over the next several years. 2020, 2019 and 2018

As of December 31, 2020, we had a total of 315 employees working in the R&D department, including 14 with Ph.D. degrees. We continue to recruit talented engineers to further enhance our research and development capabilities. We have research and development departments in our facilities in Texas, Georgia, China and Taiwan. Our research and development teams collaborate on joint projects, and by co-locating with our manufacturing operations enable us to achieve an efficient cost structure and improve our time to market.

A key factor in our research and development success is our highly collaborative process for new product development. Particularly in our equipment and module businesses, we often collaborate very closely with our customers from a very early stage in product development. By purposefully fostering this close collaboration, we believe that we can more rapidly develop leading solutions meeting the needs of our customers.

Manufacturing and Operations 

We have three manufacturing sites: Sugar Land, Texas, Ningbo, China and Taipei, Taiwan. Our research and development functions are generally partnered with our manufacturing locations, and we have an additional research and development facility in Duluth, Georgia. In our Sugar Land facility, we manufacture laser chips (utilizing our MBE and MOCVD processes), subassemblies and components. The subassemblies are used in the manufacture of components by our other manufacturing facilities or sold to third parties as modules. We manufacture our laser chips only within our Sugar Land facility, where our laser design team is located. In our Taiwan location, we manufacture optical components, such as our butterfly lasers, which incorporate laser chips, subassemblies and components manufactured within our Sugar Land facility. In addition, in our Taiwan location, we manufacture transceivers for the internet data center, telecom, FTTH and other markets. In our China facility, we take advantage of lower labor costs and manufacture certain more labor intensive components and optical equipment systems, such as optical subassemblies and transceivers for the internet data center market, CATV transmitters (at the headend) and CATV outdoor equipment (at the node). Each manufacturing facility conducts testing on the components, modules or subsystems it manufactures and each facility is certified to ISO 9001:2015. Our facilities in Ningbo, China, Taipei, Taiwan, and Sugar Land, Texas are all certified to ISO 14001:2015.

We sell our products to customers worldwide, and in addition to these external customer sales many of our products are used internally in the production of transceivers and equipment that we manufacture. With a vertically integrated manufacturing process, we produce many of our own laser chips and other parts required to manufacture our optical components. Through this model, we are able to reduce development time and product costs as well as actively monitor and control product quality. We incorporate our own components into our transceivers, subsystems and equipment products wherever possible. In instances where we do not produce components ourselves, we source them from external suppliers and regularly evaluate these relationships in an attempt to reduce risk and lower cost.

We depend on a limited number of suppliers, including in some cases our own internal supply, for certain raw materials and components used in our products. We regularly review our vendor relationships in an attempt to mitigate risks and lower costs, especially where we depend on one or two vendors for critical components or raw materials. While maintaining inventories that we believe are sufficient to meet our near-term needs, we strive not to carry significant inventories of externally sourced raw materials. Accordingly, we maintain ongoing communications with our vendors in order to help prevent any interruptions in supply, and have implemented a supply-chain management program to maintain quality and lower purchase prices through standardized purchasing efficiencies and design requirements.

Customers 

Our customers are primarily internet data center operators, CATV and telecom equipment manufacturers, and internet service providers. We generally employ a direct sales model in North America and in the rest of the world we use both direct and indirect sales channels. In 2020, 2019 and 2018, we obtained 97.6%, 98.0%, and 96.4% of our revenue, respectively, through our direct sales efforts and the remainder of our revenue through our indirect sales channels. Our sales channel partners provide logistical services and day-to-day customer support. Where we sell through an indirect sales channel, we work with the end customer to establish technological specifications for our products. Our equipment customers typically offer our equipment under their brand-name and our equipment is often customized with unique design or performance criteria by each of these customers. We also from time to time offer design or manufacturing services to customers to assist them in more effectively using our products and realizing time-to-market advantages.

In the last three years, we have taken several actions to increase the diversity of our customer base. These actions include hiring sales staff to improve our ability to serve new customers and introduction of new products that we believe will appeal to new customers. Furthermore, we have developed additional original design manufacturer, or ODM, relationships with customers in each of our target markets which should enable us to diversify our revenue base.

In 2020, the three customers who contributed most to our data center revenue were Microsoft, Amazon, and a US based large datacenter operator. Our CATV products were used by three large CATV original equipment manufacturers, or OEMs, consisting of Cisco, a global CATV NEM, and CommScope (which in 2019 acquired Arris, who had previously acquired the Motorola Home Business in 2013 and Pace Plc in 2016). In 2020, revenue from the internet data center market, CATV market, telecom market, FTTH market and other markets provided 73.9%, 16.2%, 9.0%, 0.01% and 0.9% of our revenue, respectively, compared to 75.2%, 19.6%, 4.4%, 0.1% and 0.7%, respectively, in 2019.

In our telecom market, we manufacture and sell optical products which include transceivers designed to transmit signals used in 5th Generation ("5G") mobile networks, and various products targeted at the metro-scale telecom networking market.   We have various other products designed for diverse applications, both inside and outside of communications technology, which generally are derivatives of products developed for our four target markets.

We support our sales efforts by attendance at industry trade shows (virtually and in person), technical conferences and other promotional efforts. These efforts are aimed at attracting new customers and enhancing our existing customer relationships.

Backlog 

We generally make sales pursuant to short-term purchase orders without deposits and subject to rescheduling, revision or cancellation on short notice. We accordingly believe that purchase orders are not an accurate indicator of our future sales and any backlog of purchase orders is not a reliable indicator of our future revenue.

Additional Financial Information 

For certain financial information regarding our business, see “Item 6. Selected Financial Data.”

Competition 

The optical networking market is intensely competitive. Because of the broad nature of our product offerings, we do not believe that we face a single major competitor across all of our markets. We do, however, experience intense competition in each product area from a number of manufacturers and we anticipate that competition will increase. Our major competitors in one or more of our markets include EMCORE Corporation, Finisar Corporation who was acquired by II-VI Incorporated, Foxconn Interconnect Technology Ltd., InnoLight Technology (Suzhou) Ltd., Intel Corporation, Lumentum Holdings, Inc., Mitsubishi, Molex, LLC, Source Photonics, Inc. and Sumitomo Electric Industries, Ltd.

Many of our competitors are larger than we are and have significantly greater financial, marketing and other resources.

In addition, several of our competitors have large market capitalizations or cash reserves and are much better positioned to acquire other companies to gain new technologies or products that may displace our products. Network equipment providers, who are our customers, and network service providers, who are supplied by our customers, may decide to manufacture the optical subsystems incorporated into their network systems in-house. We also encounter potential customers that, because of existing relationships, are committed to the products offered by these competitors.

We believe the principal competitive factors in our target markets include the following:

We believe that we compete favorably with respect to the above factors based on our MBE and MOCVD processes, our vertically integrated model, the performance and reliability of our product offerings, and our technical expertise in light engine design and manufacture.

Seasonality

See Part II, Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Seasonality,” regarding seasonality of certain of the Company’s products.

Human Capital

Employees

As of December 31, 2020, we employed 2,682 full-time employees, of which 42 held Ph.D. degrees in a science or engineering field. Of our employees, 476 are located in the U.S., 773 are located in Taiwan and 1,433 are located in China. 

As of December 31, 2020, none of our employees are represented by any collective bargaining agreement, but certain employees of our China subsidiary are members of a trade union. We have never suffered any work stoppage as a result of an employment related strike or any employee related dispute and believe that we have satisfactory relations with our employees.

Employee Engagement, Development and Career Planning  

Our business results depend in part on our ability to successfully manage our human capital resources, including attracting, identifying, and retaining key talent. Factors that may affect our ability to attract and retain qualified employees include employee morale, our reputation, competition from other employers, and availability of qualified individuals.  We believe our commitment to our human capital resources is an important component of our mission to deliver superior products to our customers. We provide all employees with the opportunity to share their opinions in open dialogues with our human resources department and senior management. We conduct a confidential annual survey of select workforce members to measure engagement. The results are discussed with senior leadership and managers. We provide all employees a wide range of professional development experiences, both formal and informal. We offer our highest level employees/executives/VPs leadership development programs as part of our talent and succession planning process. Also, we have development programs for managers and supervisors and learning opportunities for all employees. We provide access to learning platforms so employees can access resources to support their career aspirations and advance their skills.

Employee Engagement, Development and Career Planning  

Our business results depend in part on our ability to successfully manage our human capital resources, including attracting, identifying, and retaining key talent. Factors that may affect our ability to attract and retain qualified employees include employee morale, our reputation, competition from other employers, and availability of qualified individuals.  We believe our commitment to our human capital resources is an important component of our mission to deliver superior products to our customers. We provide all employees with the opportunity to share their opinions in open dialogues with our human resources department and senior management. We conduct a confidential annual survey of select workforce members to measure engagement. The results are discussed with senior leadership and managers. We provide all employees a wide range of professional development experiences, both formal and informal. We offer our highest level employees/executives/VPs leadership development programs as part of our talent and succession planning process. Also, we have development programs for managers and supervisors and learning opportunities for all employees. We provide access to learning platforms so employees can access resources to support their career aspirations and advance their skills.

Employee Safety

The safety of our employees is a paramount value for us. We provide mandatory safety trainings in our production facilities, which are designed to focus on empowering our employees with the knowledge and tools they need to make safe choices and to mitigate risks. Supervisors complete safety management courses as well. In response to the COVID-19 pandemic, we implemented significant changes that we determined were in the best interest of our employees and which comply with government orders in all the states and countries where we operate. In an effort to keep our employees safe and to maintain operations during the COVID-19 pandemic, we have implemented a number of new health-related measures including, the requirement to wear company provided face-masks at all times while on company property, implemented temperature taking protocols, increased hygiene, cleaning and sanitizing procedures at all Company sites,  implemented social-distancing, implemented restrictions on visitors to our facilities, limiting in-person meetings and other gatherings.  

Compensation, Benefits and Wellness 

We offer fair, competitive compensation and benefits that support our employees’ overall wellness. Further, the health and wellness of our employees are critical to our success. We provide our employees with access to a variety of innovative, flexible and convenient health and wellness programs. Such programs are designed to support employees' physical and mental health by providing tools and resources to help them improve or maintain their health status and encourage engagement in healthy behaviors. We offer financial education and financial wellness tools and resources to help employees reach their personal financial goals. Additionally, we provide robust compensation and benefits through internal and external benchmarking.

Governmental Regulations  

Our research and development and manufacturing operations and our products are subject to a variety of federal, state, local and foreign environmental, health and safety laws and regulations, including those governing discharges of pollutants to air and water, the use, storage, handling and disposal of hazardous materials and solid wastes, employee health and safety, and the hazardous material content in our products. Our environmental management systems in our facilities in Sugar Land, Texas, Ningbo, China and Taipei, Taiwan are all certified to meet the requirements of ISO14001:2015. However, there can be no assurance that violations of applicable laws at any of our facilities will not occur in the future as a result of human error, accident, equipment failure or other causes. We use, store and dispose of hazardous materials and solid wastes in our manufacturing operations and hazardous materials are present in our products. We incur costs to comply with environmental, health and safety requirements, and any failure to comply, or the identification of contamination for which we are found liable, could cause us to incur substantial costs, including cleanup costs, natural resource damages, monetary fines, or administrative, civil or criminal penalties, and subject us to property damage and personal injury claims, and result in injunctive relief including the suspension of production, alteration or upgrades of our manufacturing processes, redesign of our products, or curtailment of sales, and could result in adverse publicity. Liability under environmental, health and safety laws can be joint and several and without regard to fault or negligence. For example, pursuant to environmental laws and regulations, including but not limited to the Comprehensive Environmental Response Compensation and Liability Act, or CERCLA, we may be liable for the full amount of any remediation-related costs at properties we currently own or operate or formerly owned, such as our currently owned Sugar Land, Texas facility, or at properties at which we previously operated, as well as at properties we will own or operate in the future, and properties to which we have sent hazardous substances, whether or not we caused the contamination.

We expect that our operations and products will be affected by new environmental requirements on an ongoing basis. Environmental, health and safety requirements have become more stringent over time, and changes to existing requirements could restrict our ability to expand our facilities, require us to acquire costly pollution control equipment, requires us to obtain additional permits for our activities, or cause us to incur other significant expenses or to modify our manufacturing processes or the hazardous material content of our products. Identification of presently unidentified environmental conditions, more vigorous enforcement by a governmental authority, enactment of more stringent legal requirements or other unanticipated events could give rise to adverse publicity, restrict our operations, affect the design or marketability of our products or otherwise cause us to incur material environmental costs or delays in planned activities.

We face increasing complexity in our product design and procurement operations as we adjust to new and upcoming requirements relating to the materials composition of our products. Some jurisdictions in which our products are sold have enacted requirements regarding the hazardous material content of certain products. For example, member states of the European Union and China are among a growing number of jurisdictions that have placed restrictions on the use of lead, among other chemicals, in electronic products, which affect the composition and packaging of our products. The passage of such requirements in additional jurisdictions, or the tightening of standards or elimination of certain exemptions in jurisdictions where our products are already subject to such requirements, could cause us to incur significant expenditures to make our products compliant with new requirements, or could limit the markets into which we may sell our products. Other governmental regulations may require us to reengineer our products to use components that are more environmentally compatible, resulting in additional costs to us.

The Bureau of Industry and Security (BIS) of the U.S. Department of Commerce is responsible for regulating the export of most commercial items that are classified as dual-use goods that may have both commercial and military applications. Our products are classified under Export Control Classification Numbers, or ECCNs, 5A991 and 6A995. Export Control Classification requirements are dependent upon an item’s technical characteristics, the destination, the end-use, and the end-user, and other activities of the end-user. Should the ECCN change, then the export of our products to certain countries would be restricted. However, we currently do not export our products to any countries on the restricted list, and therefore a change in the ECCN would not materially impact our business.

Sources of Raw Materials

We depend on a limited number of suppliers for certain raw materials, components, and equipment used in our products. We continually review our supplier relationships to mitigate risks and lower costs, especially where we depend on one or two suppliers for critical components or raw materials. While maintaining inventories that we believe are sufficient to meet our near-term needs, we strive not to carry significant inventories of raw materials. Accordingly, we maintain ongoing communications with our suppliers in order to prevent any interruptions in supply, and have implemented a supply-chain management program to maintain quality and lower purchase prices through standardized purchasing efficiencies and design requirements. To date, we generally have been able to obtain sufficient quantities of critical supplies in a timely manner.

We are subject to rules promulgated by the SEC pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act regarding the use of "conflict minerals". These rules have imposed and will continue to impose additional costs and may introduce new risks related to our ability to verify the origin of any "conflict minerals" used in our products.

Corporate Information 

We were incorporated in the State of Texas in 1997. In March 2013, Applied Optoelectronics, Inc., a Texas corporation, converted into a Delaware corporation. Prime World International Holdings, Ltd. (“Prime World”) is a wholly-owned subsidiary of the Company incorporated in the British Virgin Islands on January 13, 2006. Prime World is the parent company of Global Technology, Inc. (“Global”). Global was established in June 2002 in the People’s Republic of China (“PRC”) and was acquired by Prime World on March 30, 2006. Prime World also operates a division in Taiwan, which is qualified to do business in Taiwan and primarily manufactures transceivers and performs research and development activities.

Our principal executive offices are located at 13139 Jess Pirtle Blvd., Sugar Land, TX 77478, and our telephone number is (281) 295-1800. Our website address is www.ao-inc.com. Information contained on our website is not incorporated by reference into this Form 10-K.

Available Information

We file electronically with the United States Securities and Exchange Commission, or SEC, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended. We make available on our website at www.ao-inc.com free of charge, copies of these reports as soon as reasonably practicable after filing these reports with, or furnishing them to, the SEC.

Investing in our common stock involves a high degree of risk. You should carefully consider the following risk factors and all other information contained in our Form 10-K, including our consolidated financial statements and related notes. If any of the following risks actually occur, we may be unable to conduct our business as currently planned and our financial condition and results of operations could be seriously harmed. In addition, the trading price of our common stock could decline due to the occurrence of any of these risks and you may lose all or part of your investment.

Risks Related to the COVID-19 Pandemic 

Epidemic diseases, such as COVID-19, or the perception of their effects, could have a material adverse effect on our business, financial condition, results of operation, or cash flows.

Outbreaks of epidemic, pandemic, or contagious diseases, such as the recent COVID-19 or, historically, the Ebola virus, Middle East Respiratory Syndrome, Severe Acute Respiratory Syndrome, or the H1N1 virus, could divert medical resources and priorities towards the treatment of that disease. Business disruptions could include disruptions or restrictions on our ability to travel or to distribute our products, as well as temporary closures of our facilities or the facilities of our suppliers and their contract manufacturers. Any disruption of our suppliers and their contract manufacturers or our customers would likely impact our sales and operating results. In addition, a significant outbreak of epidemic, pandemic, or contagious diseases in the human population could result in a widespread health crisis that could adversely affect the economies and financial markets of many countries, resulting in an economic downturn that could affect demand for our products. Any of these events could have a material adverse effect on our business, financial condition, results of operations, or cash flows.  For example, as a result of the extension of the Lunar New Year holidays due to the recent outbreak of COVID-19, certain of our product shipments from China have been delayed. Although we are monitoring the situation on a daily basis, it is currently unknown whether the outbreak will continue to disrupt our product shipments or impact manufacturing in the region or other regions where we operate over a prolonged period. If such disruption were to extend over a prolonged period, it could have a material impact on our revenues and our business. Any disruption resulting from similar events on a larger scale or over a prolonged period could cause significant delays in shipments of our products until we are able to resume such shipments, or shift our manufacturing, assembly, or test from the affected contractor to another third-party vendor, if needed. There can be no assurance that alternative capacity could be obtained on favorable terms, if at all.

The spread of the COVID-19 virus during 2020 caused an economic downturn on a global scale, as well as significant volatility in the financial markets. In March 2020 the World Health Organization declared the spread of the COVID-19 virus a pandemic. Our operations have been negatively impacted by the pandemic and are likely to continue to be impacted. The extent and duration of this impact is uncertain and will depend on factors including the extent to which our customers' businesses are impacted by the pandemic. In order to protect our employees and also minimize the risk of potential disruptions to our business that could occur should a virus outbreak occur in one of our facilities, we have established and implemented a work from home provision for our employees, where possible. We have also modified our business practices (including employee travel, and cancellation of physical participation in meetings, events and conferences), and we may take further actions as may be required by government authorities or that we determine are in the best interests of our employees, customers and business partners. However, even with these precautions, it is not possible to eliminate the risk of a widespread outbreak among our employees and if such an outbreak were to occur, it would likely have a negative impact on our business, results of operations, and our financial condition.

The impact of the COVID-19 pandemic continues to unfold. The extent of the pandemic’s effect on our operational and financial performance will depend in large part on future developments, which cannot be predicted with confidence at this time. Future developments include the duration, scope and severity of the pandemic, the actions taken to contain or mitigate its impact, the impact on governmental programs and budgets, the development of treatments or vaccines, and the resumption of widespread economic activity. Due to the inherent uncertainty of the unprecedented and rapidly evolving situation, we are unable to predict with any confidence the likely impact of the COVID-19 pandemic on our future operations.

Risks Related to Operating Our Business 

We are dependent on our key customers for a significant portion of our revenue and the loss of, or a significant reduction in orders from, any of our key customers would adversely impact our revenue and results of operations.

We generate much of our revenue from a limited number of customers. For each year ended 2020, 2019 and 2018, our top ten customers represented 84.3%, 88.1%, and 92.9% of our revenue, respectively. In 2020, Microsoft represented 38.3% of our revenue, and Amazon represented 11.5% of our revenue. As a result, the loss of, or a significant reduction in orders from any of our key customers would materially and adversely affect our revenue and results of operations. We typically do not have long-term contracts with our customers and instead rely on recurring purchase orders. However, many of our current revenue expectations and forecasts reflect significant anticipated orders from a limited number of key customers. If our key customers do not continue to purchase our existing products or fail to purchase additional products from us, our revenue would decline and our results of operations would be adversely affected. 

Adverse events affecting our key customers could also negatively affect our ability to retain their business and obtain new purchase orders, which could adversely affect our revenue and results of operations. For example, in recent years, there has been consolidation among various network equipment manufacturers and this trend is expected to continue. We are unable to predict the impact that industry consolidation would have on our existing or potential customers. We may not be able to offset any potential decline in revenue arising from the consolidation of our existing customers with revenue from new customers or additional revenue from the merged company.

Customer demand is difficult to forecast accurately and, as a result, we may be unable to match production with customer demand. 

We make planning and spending decisions, including determining the levels of business that we will seek and accept, production schedules, component procurement commitments, personnel needs and other resource requirements, based on our estimates of product demand and customer requirements. Our products are typically purchased pursuant to individual purchase orders. While our customers may provide us with their demand forecasts, they are typically not contractually committed to buy any quantity of products beyond firm purchase orders. Furthermore, many of our customers may increase, decrease, cancel or delay purchase orders already in place without significant penalty. The short-term nature of commitments by our customers and the possibility of unexpected changes in demand for their products reduce our ability to accurately estimate future customer requirements. On occasion, customers may require rapid increases in production, which can strain our resources, cause our manufacturing to be negatively impacted by materials shortages, necessitate more onerous procurement commitments and reduce our gross margin. We may not have sufficient capacity at any given time to meet the volume demands of our customers, or one or more of our suppliers may not have sufficient capacity at any given time to meet our volume demands. If any of our major customers decrease, stop or delay purchasing our products for any reason, we will likely have excess manufacturing capacity or inventory and our business and results of operations would be harmed.

If our customers do not qualify our products for use on a timely basis, our results of operations may suffer.

Prior to the sale of new products, our customers typically require us to “qualify” our products for use in their applications. At the successful completion of this qualification process, we refer to the resulting sales opportunity as a “design win.” Additionally, new customers often audit our manufacturing facilities and perform other evaluations during this qualification process. The qualification process involves product sampling and reliability testing and collaboration with our product management and engineering teams in the design and manufacturing stages. If we are unable to accurately predict the amount of time required to qualify our products with customers, or are unable to qualify our products with certain customers at all, then our ability to generate revenue could be delayed or our revenue would be lower than expected and we may not be able to recover the costs associated with the qualification process or with our product development efforts, which would have an adverse effect on our results of operations.

In addition, due to rapid technological changes in our markets, a customer may cancel or modify a design project before we have qualified our product or begun volume manufacturing of a qualified product. It is unlikely that we would be able to recover the expenses for cancelled or unutilized custom design projects. Some of these unrecoverable expenses for cancelled or unutilized custom design projects may be significant. It is difficult to predict with any certainty whether our customers will delay or terminate product qualification or the frequency with which customers will cancel or modify their projects, but any such delay, cancellation or modification would have a negative effect on our results of operations.

Our ability to successfully qualify and scale capacity for new technologies and products is important to our ability to grow our business and market presence, and we may invest a significant amount to scale our capacity to meet potential demand from customers for our new technologies and products. If we are unable to qualify and sell any of our new products in volume, on time, or at all, our results of operations may be adversely affected.

We must continually develop successful new products and enhance existing products, and if we fail to do so or if our release of new or enhanced products is delayed, our business may be harmed.

The markets for our products are characterized by frequent new product introductions, changes in customer requirements and evolving industry standards, all with an underlying pressure to reduce cost and meet stringent reliability and qualification requirements. Our future performance will depend on our successful development, introduction and market acceptance of new and enhanced products that address these challenges. If we are unable to make our new or enhanced products commercially available on a timely basis, we may lose existing and potential customers and our financial results would suffer.

In addition, due to the costs and length of research, development and manufacturing process cycles, we may not recognize revenue from new products until long after such expenditures, if at all, and our margins may decrease if our costs are higher than expected, adversely affecting our financial condition and results of operations.

Although the length of our product development cycle varies widely by product and customer, it may take 18 months or longer before we receive our first order. As a result, we may incur significant expenses long before customers accept and purchase our products.

Product development delays may result from numerous factors, including:

The introduction of new products by us or our competitors and other changes in our customer’s demands could result in a slowdown in demand for our existing products and could result in a write-down in the value of our inventory. We have in the past experienced periodic fluctuations in demand for existing products and delays in new product development, and such fluctuations will likely occur in the future. To the extent we fail to qualify our products and obtain their approval for use, which we refer to as a design win, or experience product development delays for any reason, our competitive position would be adversely affected and our ability to grow our revenue would be impaired.

Furthermore, our ability to enter a market with new products in a timely manner can be critical to our success because it is difficult to displace an existing supplier for a particular type of product once a customer has chosen a supplier, even if a later-to-market product provides better performance or cost efficiency.

The development of new, technologically advanced products is a complex and uncertain process requiring frequent innovation, highly-skilled engineering and development personnel and significant capital, as well as the accurate anticipation of technological and market trends. We cannot assure you that we will be able to identify, develop, manufacture, market or support new or enhanced products successfully or on a timely basis. Further, we cannot assure you that our new products will gain market acceptance or that we will be able to respond effectively to product introductions by competitors, technological changes or emerging industry standards. We also may not be able to develop the underlying core technologies necessary to create new products and enhancements, license these technologies from third parties, or remain competitive in our markets.

Our revenues, growth rates and operating results are likely to fluctuate significantly as a result of factors that are outside our control, which could adversely impact our operating results.

Our revenues, growth rates and operating results are likely to fluctuate significantly in the future as a result of factors that are outside our control. We may not achieve similar revenues, growth rates or operating results in future periods. Our revenues, growth rates and operating results for any prior quarterly or annual period should not be relied upon as any indication of our future revenues, growth rates or operating results. The timing of order placement, size of orders and satisfaction of contractual customer acceptance criteria, changes in the pricing of our products due to competitive pressures as well as order or shipment delays or deferrals, with respect to our products, may cause material fluctuations in revenues. Our lengthy sales cycle, which may extend to more than one year, may cause our revenues and operating results to vary from period to period and it may be difficult to predict the timing and amount of any variation. Delays or deferrals in purchasing decisions by our customers may increase as we develop new or enhanced products for existing and new markets, including automotive and biotechnology markets. Our current and anticipated future dependence on a small number of customers increases the revenue impact of each such customer’s decision to delay or defer purchases from us, or decision not to purchase products from us. Our expense levels in the future will be based, in large part, on our expectations regarding future revenue sources and, as a result, operating results for any quarterly period in which anticipated material orders fail to occur, or are delayed or deferred, could be significantly harmed.

Given the high fixed costs associated with our vertically integrated business, a reduction in demand for our products will likely adversely impact our gross profits and our results of operations.

We have a high fixed cost base due to our vertically integrated business model, including the fact that 2,269 of our employees as of December 31, 2020 were employed in manufacturing and research and development operations. We may not be able to adjust these fixed costs quickly to adapt to rapidly changing market conditions. Our gross profit and gross margin are greatly affected by our sales volume and volatility on a quarterly basis and the corresponding absorption of fixed manufacturing overhead expenses. In addition, because we are a vertically integrated manufacturer, insufficient demand for our products may subject us to the risk of high inventory carrying costs and increased inventory obsolescence. Given our vertical integration, the rate at which we turn inventory has historically been low when compared to our cost of sales. We do not expect this to change significantly in the future and believe that we will have to maintain a relatively high level of inventory compared to our cost of sales. As a result, we continue to expect to have a significant amount of working capital invested in inventory. We may be required to write down inventory costs in the future and our high inventory costs may have an adverse effect on our gross profits and our results of operations.

Increasing costs and shifts in product mix may adversely impact our gross margins. 

Our gross margins on individual products and among products fluctuate over each product’s life cycle. Our overall gross margins have fluctuated from period to period as a result of shifts in product mix, the introduction of new products, decreases in average selling prices and our ability to reduce product costs, and these fluctuations are expected to continue in the future. We may not be able to accurately predict our product mix from period to period, and as a result we may not be able to forecast accurately our overall gross margins. The rate of increase in our costs and expenses may exceed the rate of increase in our revenue, either of which would materially and adversely affect our business, our results of operations and our financial condition.

Our financial results may vary significantly from quarter-to-quarter due to a number of factors, which may lead to volatility in our stock price. 

Our quarterly revenue and operating results have varied in the past and will likely continue to vary significantly from quarter-to-quarter. This variability may lead to volatility in our stock price as research analysts and investors respond to these quarterly fluctuations. These fluctuations are due to numerous factors, including:

The foregoing factors are difficult to forecast, and these, as well as other factors, could materially adversely affect our quarterly and annual operating results. In addition, a significant amount of our operating expenses are relatively fixed in nature due to our internal manufacturing, research and development, sales and general administrative efforts. Any failure to adjust spending quickly enough to compensate for a revenue shortfall could magnify the adverse impact of such revenue shortfall on our results of operations. For these reasons, you should not rely on quarter-to-quarter comparisons of our results of operations as an indicator of future performance. Moreover, our operating results may not meet our announced guidance or the expectations of research analysts or investors, in which case the price of our common stock could decrease significantly. There can be no assurance that we will be able to successfully address these risks.  

We depend on key personnel to develop and maintain our technology and manage our business in a rapidly changing market.

The continued services of our executive officers and other key engineering, sales, marketing, manufacturing and support personnel is essential to our success. For example, our ability to achieve new design wins depends upon the experience and expertise of our engineers. Any of our key employees, including our Chief Executive Officer, Chief Financial Officer, Senior Vice President and North America General Manager and Senior Vice President and Asia General Manager, may resign at any time. We do not have key person life insurance policies covering any of our employees.

To implement our business plan, we also intend to hire additional employees, particularly in the areas of engineering, manufacturing and sales. Our ability to continue to attract and retain highly skilled employees is a critical factor in our success. Competition for highly skilled personnel is intense. We may not be successful in attracting, assimilating or retaining qualified personnel to satisfy our current or future needs. Our ability to develop, manufacture and sell our products, and thus our financial condition and results of operations, would be adversely affected if we are unable to retain existing personnel or hire additional qualified personnel.

We depend on a limited number of suppliers and any supply interruption could have an adverse effect on our business. 

We depend on a limited number of suppliers for certain raw materials and components used in our products. Some of these suppliers could disrupt our business if they stop, decrease or delay shipments or if the materials or components they ship have quality or reliability issues. Some of the raw materials and components we use in our products are available only from a sole source or have been qualified only from a single supplier. Furthermore, other than our current suppliers, there are a limited number of entities from whom we could obtain certain materials and components. We may also face shortages if we experience increased demand for materials or components beyond what our qualified suppliers can deliver. Our inability to obtain sufficient quantities of critical materials or components could adversely affect our ability to meet demand for our products, adversely affecting our financial condition and results of operations.

We typically have not entered into long-term agreements with our suppliers and, therefore, our suppliers could stop supplying materials and components to us at any time or fail to supply adequate quantities of materials or components to us on a timely basis. It is difficult, costly, time consuming and, on short notice, sometimes impossible for us to identify and qualify new suppliers. Our customers generally restrict our ability to change the components in our products. For more critical components, any changes may require repeating the entire qualification process. Our reliance on a limited number of suppliers or a single qualified vendor may result in delivery and quality problems, and reduced control over product pricing, reliability and performance.

Our products could contain defects that may cause us to incur significant costs or result in a loss of customers. 

Our products are complex and undergo quality testing as well as formal qualification by our customers. Our customers’ testing procedures are limited to evaluating our products under likely and foreseeable failure scenarios and over varying amounts of time. For various reasons, such as the occurrence of performance problems that are unforeseeable in testing or that are detected only when products age or are operated under peak stress conditions, our products may fail to perform as expected long after customer acceptance. Failures could result from faulty components or design, problems in manufacturing or other unforeseen reasons. Any such failures could delay product shipments to our customers or result in a loss of customers. For example, shipments of certain of our 100 Gbps transceiver products to one of our customers decreased during the three months ended September 30, 2018 due to customer concerns about failures of similar products shipped previously. As a result, we could incur significant costs to repair or replace defective products under warranty, particularly when such failures occur in installed systems. Our products are typically embedded in, or deployed in conjunction with, our customers’ products, which incorporate a variety of components, modules and subsystems and may be expected to interoperate with modules produced by third parties. As a result, not all defects are immediately detectable and when problems occur, it may be difficult to identify the source of the problem. We face this risk because our products are widely deployed in many demanding environments and applications worldwide. In addition, we may in certain circumstances honor warranty claims after the warranty has expired or for problems not covered by warranty to maintain customer relationships. Any significant product failure could result in litigation, damages, repair costs and lost future sales of the affected product and other products, divert the attention of our engineering personnel from our product development efforts and cause significant customer relations problems, all of which would harm our business. Although we carry product liability insurance, this insurance may not adequately cover our costs arising from defects in our products or otherwise.

Future acquisitions may adversely affect our financial condition and results of operations.

As part of our business strategy, we may pursue acquisitions of companies that we believe could enhance or complement our current product portfolio, augment our technology roadmap or diversify our revenue base. Acquisitions involve numerous risks, any of which could harm our business, including:

Acquisitions may also result in the recording of goodwill and other intangible assets subject to potential impairment in the future, adversely affecting our operating results. We may not achieve the anticipated benefits of an acquisition if we fail to evaluate it properly, and we may incur costs in excess of what we anticipate. A failure to evaluate and execute an acquisition appropriately or otherwise adequately address these risks may adversely affect our financial condition and results of operations.

Our future results of operations may be subject to volatility as a result of exposure to fluctuations in currency exchange rates. 

We have significant foreign currency exposure and are affected by fluctuations among the U.S. dollar, the Chinese Renminbi, or RMB, and the New Taiwan dollar, or NT dollar, because a substantial portion of our business is conducted in China and Taiwan. Our sales, raw materials, components and capital expenditures are denominated in U.S. dollars, RMB and NT dollars in varying amounts.

Foreign currency fluctuations may adversely affect our revenue and our costs and expenses, and hence our results of operations. The value of the NT dollar or the RMB against the U.S. dollar and other currencies may fluctuate and be affected by, among other things, changes in political and economic conditions. The RMB currency is no longer being pegged solely to the value of the U.S. dollar. In the long term, the RMB may appreciate or depreciate significantly in value against the U.S. dollar, depending upon the fluctuation of the basket of currencies against which it is currently valued, or it may be permitted to enter into a full float, which may also result in a significant appreciation or depreciation of the RMB against the U.S. dollar. In addition, our currency exchange variations may be magnified by Chinese exchange control regulations that restrict our ability to convert RMB into foreign currency.

To date, we have not entered into any hedging transactions in an effort to reduce our exposure to foreign currency exchange risk. While we may decide to enter into hedging transactions in the future, the availability and effectiveness of these hedging transactions may be limited and we may not be able to successfully hedge our exposure.

Natural disasters or other catastrophic events could harm our operations. 

Our operations in the U.S., China and Taiwan could be subject to significant risk of natural disasters, including earthquakes, hurricanes, typhoons, flooding and tornadoes, as well as other catastrophic events, such as epidemics, terrorist attacks or wars. For example, our corporate headquarters and wafer fabrication facility in Sugar Land, Texas is located near the Gulf of Mexico, an area that is susceptible to hurricanes. We use a proprietary MBE laser manufacturing process that requires customized equipment, and this process is currently conducted and located solely at our wafer fabrication facility in Sugar Land, Texas, such that a natural disaster, terrorist attack or other catastrophic event that affects that facility would materially harm our operations. In addition, our manufacturing facility in Taipei, Taiwan, is susceptible to typhoons and earthquakes, and our manufacturing facility in Ningbo, China, has from time to time, suffered electrical outages. Any disruption in our manufacturing facilities arising from these and other natural disasters or other catastrophic events could cause significant delays in the production or shipment of our products until we are able to shift production to different facilities or arrange for third parties to manufacture our products. We may not be able to obtain alternate capacity on favorable terms or at all. Our property insurance coverage with respect to natural disaster is limited and is subject to deductible and coverage limits. Such coverage may not be adequate or continue to be available at commercially reasonable rates and terms. The occurrence of any of these circumstances may adversely affect our financial condition and results of operation.

Legal and Regulatory Risks

We are subject to governmental export and import controls that could subject us to liability or impair our ability to compete in international markets. 

We are subject to export and import control laws, trade regulations and other trade requirements that limit which products we sell and where and to whom we sell our products. Specifically, the Bureau of Industry and Security of the U.S. Department of Commerce is responsible for regulating the export of most commercial items that are so called dual-use goods that may have both commercial and military applications. Our products are classified under Export Control Classification Numbers, or ECCNs, 5A991 and 6A995. Export Control Classification requirements are dependent upon an item’s technical characteristics, the destination, the end-use, the end-user, and other activities of the end-user. Should the regulations applicable to our products change, or the restrictions applicable to countries to which we ship our products change, then the export of our products to such countries could be restricted. As a result, our ability to export or sell our products to certain countries could be restricted, which could adversely affect our business, financial condition and results of operations.

Changes in our products or any change in export or import regulations or related legislation, shift in approach to the enforcement or scope of existing regulations, or change in the countries, persons or technologies targeted by such regulations, could result in delayed or decreased sales of our products to existing or potential customers. In such event, our business and results of operations could be adversely affected.

Our business could be negatively impacted as a result of shareholder activism.

In recent years, shareholder activists have become involved in numerous public companies. Shareholder activists frequently propose to involve themselves in the governance, strategic direction, and operations of the Company. We may in the future become subject to such shareholder activity and demands. Such demands may disrupt our business and divert the attention of our management and employees, and any perceived uncertainties as to our future direction resulting from such a situation could result in the loss of potential business opportunities, be exploited by our competitors, cause concern to our current or potential customers, and make it more difficult to attract and retain qualified personnel and business partners, all of which could adversely affect our business. In addition, actions of activist shareholders may cause significant fluctuations in our stock price based on temporary or speculative market perceptions or other factors that do not necessarily reflect the underlying fundamentals and prospects of our business.

The unfavorable outcome of any pending or future litigation or administrative action and expenses incurred in connection with litigation could result in financial losses or harm to our business.

We have been, and in the future may be, subject to legal actions in the ordinary course of our operations, both domestically and internationally. There can be no assurances as to the favorable outcome of any litigation. In addition it can be costly to defend litigation and these costs could negatively impact our financial results. As disclosed in “Item 3. Legal Proceedings,” on August 5, 2017, we and certain of our officers are currently subject to class action litigation related to allegations that we made materially false and misleading statements or failed to disclose material facts. Such litigation includes requests for damages and other relief. As further described in that section, subsequent derivative actions and securities class actions have since been filed.  This litigation and any other such litigation could result in substantial costs and divert our management’s attention from other business concerns, which could seriously harm our business.

Risks Related to Our Indebtedness and Future Financing 

Our Paycheck Protection Program loan may not be forgiven and could subject us to enhanced scrutiny.

On April 17, 2020, we were granted a loan of $6.2 million under the Paycheck Protection Program ("PPP"), which is a component of the Coronavirus Aid, Relief, and Economic Security ("CARES") Act. This program was implemented hastily in response to the unprecedented economic downturn related to the COVID-19, and provides for loans of up to $10 million for eligible small businesses (defined generally as businesses with less than 500 U.S. resident employees). Due to the speed of implementation of this program, official guidance and interpretations of the requirements of the program have been limited and have changed over time. On April 29, 2020, the U.S. Department of the Treasury updated its "Frequently Asked Questions" (FAQ) document regarding the PPP program to indicate its intention to review all loans obtained under the program that exceed $2 million.

We have diligently considered all known guidance and determined that we meet all the requirements for the program; however, we cannot predict with certainty how such a review might be conducted or what new information or interpretations might emerge prior to the completion of the review. As such, we cannot be certain whether our loan may be forgiven, even if we meet the currently understood requirements for forgiveness. The review could also subject us to additional scrutiny which could adversely affect our financial condition and results of operations.

Our loan agreements contain restrictive covenants that may adversely affect our ability to conduct our business. 

We have lending arrangements with several financial institutions, including loan agreements with Truist Bank in the U.S., credit facilities with Taishin International Bank and equipment finance agreements with Chailease Finance Co., Ltd. in Taiwan and credit facilities with China Merchants Bank Co. Ltd., Shanghai Pudong Development Bank Co., Ltd and China Zheshang Bank Co., Ltd. in China. Our loan agreements governing our long-term debt obligations in the U.S. and Asia contain certain financial and operating covenants that limit our management’s discretion with respect to certain business matters. Among other things, these covenants require us to maintain certain financial ratios and restrict our ability to incur additional debt, create liens or other encumbrances, change the nature of our business, sell or otherwise dispose of assets and merge or consolidate with other entities. In addition, the Indenture governing the Notes contains covenants that limit our ability and the ability of our subsidiaries to, among other things: (i) incur or guarantee additional indebtedness or issue disqualified stock; and (ii) create or incur liens.

These restrictions may limit our flexibility in responding to business opportunities, competitive developments and adverse economic or industry conditions. Any failure by us or our subsidiaries to comply with these agreements could harm our business, financial condition and operating results. In addition, our obligations under our loan agreements with Truist Bank are secured by our accounts receivable, inventory, intellectual property, and all business assets including real estate and equipment. Our credit facilities with Shanghai Pudong Development Bank Co., Ltd. and China Zheshang Bank Co., Ltd. are secured by real estate. A breach of any of covenants under our loan agreements, or a failure to pay interest or indebtedness when due under any of our credit facilities could result in a variety of adverse consequences, including the acceleration of our indebtedness.

We may not be able to obtain additional capital when desired, on favorable terms or at all.

We operate in a market that makes our prospects difficult to evaluate and, to remain competitive, we will be required to make continued investments in capital equipment, facilities and technological improvements. We expect that substantial capital will be required to expand our manufacturing capacity and fund working capital for anticipated growth. If we do not generate sufficient cash flow from operations or otherwise have the capital resources to meet our future capital needs, we may need additional financing to implement our business strategy, which includes:

If we raise additional funds through the issuance of our common stock or convertible securities, the ownership interests of our stockholders could be significantly diluted. These newly issued securities may have rights, preferences or privileges senior to those of existing stockholders. Additional financing may not, however, be available on terms favorable to us, or at all, if and when needed, and our ability to fund our operations, take advantage of unanticipated opportunities, develop or enhance our infrastructure or respond to competitive pressures could be significantly limited. If we cannot raise required capital when needed, including under our Registration Statement filed with the SEC in October 2019, effective January 2020, we may be unable to meet the demands of existing and prospective customers, adversely affecting our sales and market opportunities and consequently our business, financial condition and results of operations.

Risks Related to Data Breaches and Network Infrastructures

Data breaches and cyberattacks could compromise our operations, our customers’ operations, or the operations of our contract manufacturers upon whom we rely, and cause significant damage to our business and reputation.

Cyberattacks have become more prevalent and much harder to detect and defend against. Companies, including companies in our industry, have been increasingly subject to a wide variety of security incidents, cyberattacks and other attempts to gain unauthorized access to their systems or to deny access and disrupt their systems and operations. These threats can come from a variety of sources, ranging in sophistication from an individual hacker to a state-sponsored attack. Cyber threats may be generic, or they may be custom-crafted against our information systems.

In the ordinary course of our business, we and our data center customers maintain sensitive data on our respective networks, including intellectual property, employee personal information and proprietary or confidential business information relating to our business and that of our customers and business partners. The secure maintenance of this information is critical to our business and reputation. Despite our implementation of network security measures, our network and storage applications have been subject to computer viruses, ransomware and other forms of cyber terrorism.

We may be subject to disruptions or failures in information technology systems and network infrastructures that could have a material adverse effect on our business and financial condition.

We rely on the efficient and uninterrupted operation of complex information technology systems and network infrastructures to operate our business. A disruption, infiltration or failure of our information technology systems as a result of software or hardware malfunctions, system implementations or upgrades, computer viruses, third-party security breaches, employee error, theft or misuse, malfeasance, power disruptions, natural disasters or accidents could cause a breach of data security, loss of intellectual property and critical data and the release and misappropriation of sensitive competitive information and partner, customer, and employee personal data. Any of these events could harm our competitive position, result in a loss of customer confidence, cause us to incur significant costs to remedy any damages and ultimately materially adversely affect our business and financial condition.

Risks Related to International Trade and Operations

We face a variety of risks associated with our international sales and operations. 

We currently derive, and expect to continue to derive, a significant portion of our revenue from sales to international customers. In 2020, 2019 and 2018, 25.4%, 18.8%, and 23.1% of our revenue was derived from sales that occurred outside of North America, respectively. In addition, a significant portion of our manufacturing operations is based in Ningbo, China and Taipei, Taiwan.

Trade-related government actions, by China or other countries that impose barriers or restrictions that would impact our ability to sell or ship products to customers or potential customers may have a negative impact on our financial condition and results of operations. We cannot predict the actions government entities may take in this context and may be unable to quickly offset or effectively react to government actions that restrict our ability to sell to certain customers or in certain jurisdictions. Government actions that affect our customers' ability to sell products or access critical elements of their supply chains may result in a decreased demand for their products, which may consequently reduce their demand for our products.

Our international revenue and operations are subject to a number of material risks, including:  

Negative developments in any of these factors in China or Taiwan or other countries could result in a reduction in demand for our products, the cancellation or delay of orders already placed, difficulties in producing and delivering our products, threats to our intellectual property, difficulty in collecting receivables, and a higher cost of doing business. Although we maintain certain compliance programs throughout the Company, violations of U.S. and foreign laws and regulations may result in criminal or civil sanctions, including material monetary fines, penalties and other costs against us or our employees, and may have a material adverse effect on our business.

Our business operations conducted in China and Taiwan are important to our success. A substantial portion of our property, plant and equipment is located in China and Taiwan. We expect to make further investments in China and Taiwan in the future. Therefore, our business, financial condition, results of operations and prospects are subject to economic, political, legal, and social events and developments in China and Taiwan. Factors affecting military, political or economic conditions in China and Taiwan could have a material adverse effect on our financial condition and results of operations, as well as the market price and the liquidity of our common shares.

Risks Related to Intellectual Property Matters 

If we fail to protect, or incur significant costs in defending, our intellectual property and other proprietary rights, our business and results of operations could be materially harmed.

Our success depends on our ability to protect our intellectual property and other proprietary rights. We rely on a combination of patent, trademark, copyright, trade secret and unfair competition laws, as well as license agreements and other contractual provisions, to establish and protect our intellectual property and other proprietary rights. We have applied for patents in the U.S. and in other foreign countries, some of which have been issued. In addition, we have registered certain trademarks in the U.S. We cannot guarantee that our pending applications will be approved by the applicable governmental authorities. Moreover, our existing and future patents and trademarks may not be sufficiently broad to protect our proprietary rights or may be held invalid or unenforceable in court. A failure to obtain patents or trademark registrations or a successful challenge to our patents and trademark registrations in the U.S. or other foreign countries may limit our ability to protect the intellectual property rights that these patent and trademark registrations intended to cover.

Policing unauthorized use of our technology is difficult and we cannot be certain that the steps we have taken will prevent the misappropriation, unauthorized use or other infringement of our intellectual property rights. Further, we may not be able to effectively protect our intellectual property rights from misappropriation or other infringement in foreign countries where we have not applied for patent protections and where effective patent, trademark, trade secret and other intellectual property laws may be unavailable, or may not protect our proprietary rights as fully as U.S. law. We may seek to secure comparable intellectual property protections in other countries. However, the level of protection afforded by patent and other laws in other countries may not be comparable to that afforded in the U.S.

We also attempt to protect our intellectual property, including our trade secrets and know-how, through the use of trade secret and other intellectual property laws, and contractual provisions. We enter into confidentiality and invention assignment agreements with our employees and independent consultants. We also use non-disclosure agreements with other third parties who may have access to our proprietary technologies and information. Such measures, however, provide only limited protection, and there can be no assurance that our confidentiality and non-disclosure agreements will not be breached, especially after our employees end their employment, and that our trade secrets will not otherwise become known by competitors or that we will have adequate remedies in the event of unauthorized use or disclosure of proprietary information. Unauthorized third parties may try to copy or reverse engineer our products or portions of our products, otherwise obtain and use our intellectual property, or may independently develop similar or equivalent trade secrets or know-how. If we fail to protect our intellectual property and other proprietary rights, or if such intellectual property and proprietary rights are infringed, misappropriated or duplicated, our business, results of operations or financial condition could be materially harmed.

In the future, we may need to take legal actions to prevent third parties from infringing upon or misappropriating our intellectual property or from otherwise gaining access to our technology. Protecting and enforcing our intellectual property rights and determining their validity and scope could result in significant litigation costs and require significant time and attention from our technical and management personnel, which could significantly harm our business. We may not prevail in such proceedings, and an adverse outcome may adversely impact our competitive advantage or otherwise harm our financial condition and our business.

We may be involved in intellectual property disputes in the future, which could divert management’s attention, cause us to incur significant costs and prevent us from selling or using the challenged technology.

Participants in the markets in which we sell our products have experienced frequent litigation regarding patent and other intellectual property rights. While we have a policy in place that is designed to reduce the risk of infringement of intellectual property rights of others and we have conducted a limited review of other companies’ relevant patents, there can be no assurance that third parties will not assert infringement claims against us. We cannot be certain that our products would not be found infringing on the intellectual property rights of others. Regardless of their merit, responding to such claims can be time consuming, divert management’s attention and resources and may cause us to incur significant expenses. Intellectual property claims against us could force us to do one or more of the following:

Any of these actions could result in a substantial reduction in our revenue and could result in losses over an extended period of time.

In any potential intellectual property dispute, our customers could also become the target of litigation. Because we often indemnify our customers for intellectual property claims made against them with respect to our products, any claims against our customers could trigger indemnification claims against us. These obligations could result in substantial expenses such as legal expenses, damages for past infringement or royalties for future use. Any indemnity claim could also adversely affect our relationships with our customers and result in substantial costs to us.

Risks Related to Our Operations in China

Our business operations conducted in China are critical to our success. A total of $85.2 million, $83.3 million, and $143.1 million or 36.3%, 43.6%, and 53.6%, of our revenue in the years ended December 31, 2020, 2019 and 2018 was attributable to our product manufactured at our plant in China, respectively. Additionally, a substantial portion of our property, plant and equipment, 40.6%, 37.1%, and 36.8% as of December 31, 2020, 2019 and 2018, was located in China, respectively. We expect to make further investments in China in the foreseeable future. Therefore, our business, financial condition, results of operations and prospects are to a significant degree subject to economic, political, legal, and social events and developments in China. 

Adverse changes in economic and political policies in China, or Chinese laws or regulations could have a material adverse effect on business conditions and the overall economic growth of China, which could adversely affect our business.

The Chinese economy differs from the economies of most developed countries in many respects, including the level of government involvement, level of development, growth rate, control of foreign exchange and allocation of resources. The Chinese economy has been transitioning from a planned economy to a more market-oriented economy. Despite reforms, the government continues to exercise significant control over China’s economic growth by way of the allocation of resources, control over foreign currency-denominated obligations and monetary policy and provision of preferential treatment to particular industries or companies.

In addition, the laws, regulations and legal requirements in China, including the laws that apply to foreign-invested enterprises, or FIEs, are subject to frequent changes. The interpretation and enforcement of such laws is uncertain. Protections of intellectual property rights and confidentiality in China may not be as effective as in the U.S. or other countries or regions with more developed legal systems. Any litigation in China may be protracted and result in substantial costs and diversion of resources and management attention. Any adverse changes to these laws, regulations and legal requirements or their interpretation or enforcement could have a material adverse effect on our business.

Furthermore, while China’s economy has experienced rapid growth in the past 20 years, growth has been uneven across different regions, among various economic sectors and over time. China has also in the past and may in the future experience economic downturns due to, for example, government austerity measures, changes in government policies relating to capital spending, limitations placed on the ability of commercial banks to make loans, reduced levels of exports and international trade, inflation, lack of financial liquidity, stock market volatility and global economic conditions. Any of these developments could contribute to a decline in business and consumer spending in addition to other adverse market conditions, which could adversely affect our business.

The turnover of direct labor in manufacturing industries in China is high, which could adversely affect our production, shipments and results of operations.

Employee turnover of direct labor in the manufacturing sector in China is extremely high and retention of such personnel is a challenge to companies located in or with operations in China. Although direct labor costs do not represent a high proportion of our overall manufacturing costs, direct labor is required for the manufacture of our products. If our direct labor turnover rates are higher than we expect, or we otherwise fail to adequately manage our direct labor turnover rates, then our results of operations could be adversely affected.

Chinese regulation of loans to and direct investment by offshore holding companies in China entities may delay or prevent us from making loans or additional capital contributions to our China subsidiary.

Any loans that we wish to make to our China subsidiary are subject to Chinese regulations and approvals. For example, any loans to our China subsidiary to finance their activities cannot exceed statutory limits, must be registered with State Administration of Foreign Exchange, or SAFE, or its local counterpart, and must be approved by the relevant government authorities. Any capital contributions to our China subsidiary must be approved by the Ministry of Commerce or its local counterpart. In addition, under Circular 142, our China subsidiary, as a FIE, may not be able to convert our capital contributions to them into RMB for equity investments or acquisitions in China.

We cannot assure you that we will be able to obtain these government registrations or approvals on a timely basis, if at all, with respect to our future loans or capital contributions to our China subsidiary. If we fail to receive such registrations or approvals, our ability to capitalize our China subsidiary may be negatively affected, which could materially and adversely affect our liquidity and ability to fund and expand our business.

Our China subsidiary is subject to Chinese labor laws and regulations, and Chinese labor laws may increase our operating costs in China.

Chinese labor laws and regulations provide certain protections for our employees located in China, and changes to those labor laws and regulations may increase our costs and reduce our flexibility. The China Labor Contract Law, which went into effect in 2008, together with its implementing rules, provides increased rights to Chinese employees compared to prior employment laws in China. Under the rules under the China Labor Contract Law, the probation period varies depending on contract terms and the employment contract can only be terminated during the probation period for cause upon three days’ notice. Additionally, an employer may not be able to terminate a contract during the probation period on the grounds of a material change of circumstances or a mass layoff. The law also has specific provisions on conditions when an employer has to sign an employment contract with open-ended terms. If an employer fails to enter into an open-ended contract in certain circumstances, the employer must pay the employee twice their monthly wage beginning from the time the employer should have executed an open-ended contract. Additionally, an employer must pay severance for nearly all terminations, including when an employer decides not to renew a fixed-term contract. Any further changes to these laws may increase our costs and reduce our flexibility.

Risks Related to Our Common Stock 

Our stock price has been and is likely to be volatile. 

The market price of our common stock has been and is likely to be subject to wide fluctuations in response to, among other things, the risk factors described in this section of this Form 10-K, and other factors beyond our control, such as fluctuations in the valuation of companies perceived by investors to be comparable to us. For example, announcements made by competitors regarding factors influencing their business may cause fluctuations in the valuation of companies throughout our industry, including fluctuations in the valuation of our stock.

Furthermore, the stock markets have experienced price and volume fluctuations that have affected and continue to affect the market prices of equity securities of many companies. These fluctuations often have been unrelated or disproportionate to the operating performance of those companies. These broad market and industry fluctuations, as well as general economic, political and market conditions, such as recessions, interest rate changes or international currency fluctuations, may negatively affect the market price of our common stock.

In the past, many companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We have been and may become the target of this type of litigation in the future. For example, on August 3, 2017 we provided guidance for the third quarter of 2017, and on August 4, 2017 the market price of our stock decreased significantly. As disclosed in “Item 3. Legal Proceedings,” on August 5, 2017, a class action lawsuit was filed against us and two of our officers. The complaint in this matter alleges that we made materially false and misleading statements or failed to disclose material facts and requests damages and other relief. On August 7, 2018, a derivative class action lawsuit was filed against our chief executive officer, chief financial officer and board of directors. The allegations are substantially similar to those under the August 5, 2017 lawsuit. On October 1, 2018, another class action lawsuit was filed in the U.S. District Court for the Southern District of Texas against us and two of our officers. The complaint in this matter alleges that we made materially false and misleading statements or failed to disclose material facts and a related action was filed on October 10, 2018. These lawsuits and any other such litigation could result in substantial costs and divert our management’s attention from other business concerns, which could seriously harm our business.

Our charter documents, stock incentive plans and Delaware law could prevent a takeover that stockholders consider favorable and could also reduce the market price of our stock.

Our amended and restated certificate of incorporation and our amended and restated bylaws and our stock incentive plans contain provisions that could delay or prevent a change in control of our company. These provisions could also make it more difficult for stockholders to elect directors and take other corporate actions. These provisions include:

In addition, we are governed by the provisions of Section 203 of the Delaware General Corporate Law. These provisions may prohibit large stockholders, in particular those owning 15% or more of our outstanding common stock, from engaging in certain business combinations without the approval of substantially all of our stockholders for a certain period of time.

These and other provisions in our amended and restated certificate of incorporation, our amended and restated bylaws and under Delaware law could discourage potential takeover attempts, reduce the price that investors might be willing to pay for shares of our common stock in the future and result in the market price being lower than it would be without these provisions.

Our Amended and Restated Certificate of Incorporation includes a forum selection clause, which could limit our stockholders' ability to obtain a favorable judicial forum for disputes with us.

           Our Amended and Restated Certificate of Incorporation provides that, unless the Company consents in writing to the selection of an alternative forum, the Court of Chancery of the State of Delaware shall be the sole and exclusive forum for (i) any derivative action or proceeding brought on behalf of the Company, (ii) any action asserting a claim of breach of a fiduciary duty owed by any director, officer or other employee of the Company to the Company or the Company's stockholders, (iii) any action asserting a claim arising pursuant to any provision of the Delaware General Corporation Law or the Company's Amended and Restated Certificate of Incorporation or By-laws, or (iv) any action asserting a claim against the Company governed by the internal affairs doctrine. This exclusive forum provision will not apply to claims under the Securities Exchange Act of 1934 but will apply to other state and federal law claims including actions arising under the Securities Act of 1933 (although our stockholders will not be deemed to have waived our compliance with the federal securities laws and the rules and regulations thereunder). Section 22 of the Securities Act of 1933, however, creates concurrent jurisdiction for federal and state courts over all suits brought to enforce any duty or liability created by the Securities Act of 1933 or the rules and regulations thereunder. Accordingly, there is uncertainty as to whether a court would enforce such a forum selection provision as written in connection with claims arising under the Securities Act of 1933. This forum selection provision in our Amended and Restated Certificate of Incorporation may limit our stockholders' ability to obtain a favorable judicial forum for disputes with us. It is also possible that a court could rule that such a provision is inapplicable or unenforceable.    

Not Applicable.

We maintain manufacturing, research and development, sales and administrative offices in the U.S., China and Taiwan. Our corporate headquarters is located at our facility in Sugar Land, Texas. The table below provides information regarding our facilities.

The information set forth under Note T "Contingencies" included in Part II, Item 8 of this Form 10-K, is incorporated herein by reference. For an additional discussion of certain risks associated with legal proceedings, see "Risk Factors" above.

Not Applicable.

PART II 

On September 26, 2013, our common stock began to trade on the NASDAQ Global Market under the symbol “AAOI”. Prior to that time, there was no public market for our common stock. As of 2021 February 20, there were 36 holders of record of our common stock (not including beneficial holders of our common stock holding in street name).

The graph below shows the cumulative total stockholder return of an investment of $100 (and the reinvestment of any dividends thereafter) on September 26, 2013 (the first trading day of our common stock) in (i) our common stock, (ii) the NASDAQ Composite Index and (iii) the NASDAQ Telecommunications Index. Our stock price performance shown in the graph below is not indicative of future stock price performance. The following graph and related information is being “furnished” and shall not be deemed “soliciting material” or be deemed to be “filed” with the SEC, nor shall such information be incorporated by reference into any future filing, except to the extent that we specifically state that such graph and related information are incorporated by reference into such filing.

 

  

For equity compensation plan information refer to Item 12 of this Form 10-K.

Dividend Policy 

We have never declared or paid any cash dividends on our capital stock, and we do not anticipate paying any cash dividends on our common stock for the foreseeable future. We currently intend to retain all available funds and future earnings for use in the operation and expansion of our business. Any future determination to pay cash dividends will be at the discretion of our board of directors and will depend upon our financial condition, results of operations, terms of financing arrangements, applicable Delaware law, capital requirements and such other factors as our board of directors deems relevant. In addition, the terms of our loan agreements governing our long-term debt obligations restricts us from paying dividends.

Unregistered Sales of Equity Securities 

Not applicable.

The selected consolidated financial data in this section is not intended to replace our consolidated financial statements and the related notes. You should read this summary consolidated financial data together with the sections titled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our audited consolidated financial statements and related notes, all included elsewhere in this Form 10-K. We derived the consolidated statements of operations data for the years ended December 31, 2020, 2019 and 2018 and the consolidated balance sheet data as of December 31, 2020 and 2019 from our consolidated financial statements appearing elsewhere in this Form 10-K. The consolidated statement of operations data for the years ended December 31, 2017 and 2016 and the consolidated balance sheet data as of December 31, 2018, 2017 and 2016 are derived from our audited consolidated financial statements that have previously been filed with the SEC. Our historical results are not necessarily indicative of the results to be expected in the future and results of interim periods are not necessarily indicative of results for the entire year.

The following table sets forth our consolidated results of operations for the periods presented (in thousands, except share and per share data):

The following table provides share-based compensation expense for the periods presented (in thousands):  

The following table provides selected balance sheet data for the periods presented (in thousands):

You should read the following discussion and analysis of our financial condition and results of operations in conjunction with our consolidated financial statements and the accompanying notes appearing elsewhere in this Form 10-K. This discussion and other parts of this Form 10-K contain forward-looking statements that involve risks and uncertainties, such as statements of our plans, objectives, expectations and intentions. Our actual results could differ materially from those discussed in the forward-looking statements. Factors that could cause or contribute to such differences include, but are not limited to, those discussed in “Risk Factors.”

Overview 

We are a leading, vertically integrated provider of fiber-optic networking products. We target four networking end-markets: internet data centers, CATV, telecom and FTTH. We design and manufacture a range of optical communications products at varying levels of integration, from components, subassemblies and modules to complete turn-key equipment. In designing products for our customers, we begin with the fundamental building blocks of lasers and laser components. From these foundational products, we design and manufacture a wide range of products to meet our customers’ needs and specifications, and such products differ from each other by their end market, intended use and level of integration. We are primarily focused on the higher-performance segments within the internet data center, CATV, telecom and FTTH markets which increasingly demand faster connectivity and innovation. Our vertically integrated manufacturing model provides us several advantages, including rapid product development, fast response times to customer requests and control over product quality and manufacturing costs.

The four end markets we target are all driven by significant bandwidth demand fueled by the growth of network-connected devices, video traffic, cloud computing and online social networking. Within the internet data center market, we benefit from the increasing use of higher-capacity optical networking technology as a replacement for copper cables, particularly as speeds reach 10 Gbps and above, as well as the movement to open internet data center architectures and the increasing use of in-house equipment design among leading internet companies. Within the CATV market, we benefit from a number of ongoing trends including the move to higher bandwidth networks among CATV service providers and the outsourcing of system design among CATV networking equipment companies. In the FTTH market, we benefit from continuing PON deployments and system upgrades among telecom service providers. In the telecom market, we benefit from deployment of new high-speed fiber-optic networks by telecom network operators, including 5G networks.

In 2020, 2019 and 2018, our revenue was $234.6 million, $190.9 million, and $267.5 million and our gross margin was 21.5%, 24.2%, and 32.8%. We have grown our annual revenue at a compound annual growth rate, or CAGR, of 17.2% between 2011 and 2020. In the years ended December 31, 2020, 2019 and 2018, we had net loss of $58.5 million, $66.0 million, and $2.1 million, respectively. At December 31, 2020 and 2019, our accumulated deficit was $88.6 million and $30.1 million, respectively. In 2020, we earned 73.9% of our total revenue from the internet data center market, and 16.2% of our total revenue from the CATV market.

We sell our products to leading OEMs in the CATV, telecom, and FTTH markets as well as internet data center operators. In 2020, revenue from the internet data center market, CATV market, telecom market and FTTH markets provided 73.9%, 16.2%, 9.0%, and 0.0% of our revenue, respectively, compared to75.2%, 19.6%, 4.4%, and 0.1% of our 2019 revenue, respectively. In 2020, our key customers in the data center market included, Microsoft Corp (Microsoft), Amazon.com (Amazon) and a multinational computer technology company. In 2020, 2019, and 2018, Microsoft accounted for 38.3%, 32.2%, and 22.1% of our revenue, Amazon accounted for 11.5%, 24.0%, and 12.1% of our revenue, and the multinational computer technology company accounted for 8.0%, 0.4%, and 0.0% of our revenue, respectively. In 2020, our key customers in the CATV market included Cisco Systems, Inc. (Cisco), a global broadband access and media distributor, and CommScope. In 2020, 2019 and 2018, Cisco accounted for 7.5%, 10.0%, and 9.9% of our revenue, respectively; CommScope accounted for 2.1%, 3.7%, and 2.1% of our revenue, respectively. The global broadband access and media distributor is a new customer in 2020, it accounted for 3.7% of our revenue in 2020. 

In 2020, our revenue increase of 22.9% over the prior-year was driven primarily by increased demand for our 100 Gbps transceivers in our data center market, and laser chips used in the manufacture of transceivers for 5G wireless communications in our telecom market. The increase in 100 Gbps demand includes increased demand from several existing customers, along with new customer additions.  We believe that some of this increase is related to increased demand for cloud-based services as a result of a shift to remote-working arrangements in the US and other areas, which in turn caused our customers to increase capacity in their data centers requiring more optical transceivers, especially 100 Gbps transceivers. The increase in 5G-related sales came mainly from customers in China, as wireless operators in that country have begun to deploy advanced 5G mobile networks. The slight increase in revenue for our CATV products is due to increased demand from CATV MSOs as they began to add capacity to their networks.  This increase in demand was at least partially attributable to network capacity expansion, particularly in the upstream direction, which is related to changes in network traffic due to increased working from home in the US earlier in the year.

We expect continued sales of our 40 Gbps and 100 Gbps products in 2021, and we expect that sales of 100 Gbps products will likely exceed sales of 40 Gbps products. However, quarter-to-quarter results may show considerable variability as is usual in a period of technology transition.  Similar to revenue, our gross margins can fluctuate materially depending on a variety of factors including average selling price changes, product mix, raw material cost reduction or increase, manufacturing utilization rate and changes in manufacturing efficiency. Furthermore, we are continuing to monitor and assess the effects of the coronavirus outbreak on our commercial and manufacturing operations, including any impact on our revenue in 2020.

Our sales model focuses on direct engagement and close coordination with our customers to determine product design, qualifications, performance and price. Our strategy is to use our direct sales force to sell to key accounts and to expand our use of distributors for increased coverage in certain international markets and certain domestic market segments. We have direct sales personnel that cover the U.S., Taiwan and China focusing primarily on major OEM customers and internet data center operators. Throughout our sales cycle, we work closely with our customers to qualify our products into their product lines. As a result, we strive to build strategic and long-lasting customer relationships and deliver products that are customized to our customers’ requirements.

Our business depends on winning competitive bid selection processes to develop components, systems and equipment for use in our customers’ products. These selection processes are typically lengthy, and as a result our sales cycles will vary based on the level of customization required, market served, whether the design win is with an existing or new customer and whether our solution being designed in our customers’ product is our first generation or subsequent generation product. We do not have any long-term purchase commitments (in excess of one year) with any of our customers, most of whom purchase our products on a purchase order basis, however, once one of our solutions is incorporated into a customer’s design, we believe that our solution is likely to continue to be purchased for that design throughout that product’s life cycle because of the time and expense associated with redesigning the product or substituting an alternative solution.

In 2020, 2019 and 2018, we had 30, 31, and 26 design wins, respectively. We define a design win as the successful completion of the evaluation stage, where our customer has tested our product, verified that our product meets substantially all of their requirements and has informed us that they intend to purchase the product from us. Although we believe that our ability to obtain design wins is a key strength and can provide meaningful and recurring revenue, an increase or decrease in the mere number of design wins does not necessarily correlate to a likely increase or decrease in revenue, particularly in the short term. As such, the number of design wins we achieve on a quarterly or annual basis and any increase or decrease in design wins will not necessarily result in a corresponding increase or decrease in revenue in the same or immediately succeeding quarter or year. For example, if our total number of design wins in an annual or quarterly period increases or decreases compared to the total number of design wins in a prior period, this does not necessarily mean that our revenue in such period will be higher or lower than our revenue in the prior period. In fact, our experience is that some design wins result in significant revenue and some do not, and the timing of such revenue is difficult to predict as it depends on the success of the end customer’s product that uses our components. Thus, some design wins result in orders and significant revenue shortly after the design win is awarded and other design wins do not result in significant orders and revenue for several months or longer after the initial design win (if at all). We do believe that over a period of years the collective impact of design wins correlates to our overall revenue growth.

COVID-19 Pandemic

We are subject to risks and uncertainties as a result of the COVID-19 pandemic. The extent of the impact of the COVID-19 pandemic on our business is highly uncertain and difficult to predict as coronavirus continues to spread around the world. The vaccine still has not become widely available to our workforce, and treatments are limited. In March 2020, we instituted travel restrictions and implemented sanitation and disinfection procedures to safeguard the health and safety of our employees which continue today. We have modified our workplace practices, which resulted in many employees working remotely. The spread of COVID-19 may still impact our supply chain operations through restrictions, reduced capacity and shutdown of business activities by suppliers whom we rely on for sourcing components and materials and third-party partners whom we rely on for manufacturing, warehousing and logistics services. Although demand for our products has been strong in the short-term as subscribers seek more bandwidth, customers’ purchasing decisions over the long-term may be impacted by the pandemic and its impact on the economy, which could in turn impact our revenue and results of operations. The extent to which the COVID-19 pandemic may materially impact our financial condition, liquidity or results of operations is uncertain.

Factors Affecting Our Performance 

Increasing Consumer Demand for Bandwidth. Bandwidth demand in all of our target markets is driving service provider investment in new equipment and in turn generating demand for our products. Increasingly, optical networking technologies are being incorporated into networking equipment, replacing legacy copper-based networking technologies. This shift to optical networking solutions benefits us as a provider of those solutions.

Pricing, Product Cost and Margins. Our products are sold in a highly competitive marketplace, and in many cases our products are only minimally differentiated from those of our competitors.  In addition, our sales are heavily concentrated with a small number of end customers.  As a result, there is strong pricing pressure across many of our product lines.  We have addressed this strong pressure in several ways:

Our product pricing is established when the product is initially introduced to the market, and thereafter through periodic negotiations with customers. We generally do not agree to periodic automatic price reductions. Furthermore, due to the dynamics in the CATV market and the value of our outsourced design services to our customers, we believe we face less downward price pressure than many of our competitors in this market. We sell a wide variety of products among our four target markets and our gross margin is heavily dependent in any quarter on the product mix achieved during that period as well as any price changes that we have agreed upon with our customers.

Customer Concentration within End Markets. Historically, our revenue has been significantly concentrated, first within the CATV market and now2020 within the internet data center market. Moreover, within these markets, revenue tends to be concentrated among a small number of customers. In the last three years, we have taken several actions to increase the diversity of our customer base. These actions include hiring additional sales staff to improve our ability to serve new customers and introduction of new products that we believe will appeal to new customers. Furthermore, we have developed additional original design manufacturer, or ODM, relationships with customers in each of our target markets which should enable us to diversify our revenue base. We had two and four customers that each accounted for more than 10% of our revenue in 2020 and 2019, respectively.

Product Development. We invest heavily to develop new and innovative products. The majority of our research and development expense is allocated to product development, usually with a specific customer and customer platform in mind. We believe our close coordination with our customers regarding their future product requirements enhances the efficiency of our research and development expenditures.

Discussion of Financial Performance 

Revenue 

We generate revenue through the sale of our products to equipment providers for the internet data center, CATV, telecom, FTTH and other markets. We derive a significant portion of our revenue from our top ten customers, and we anticipate that we will continue to do so for the foreseeable future. The following chart provides the revenue contribution from each of the markets we serve for the years 2020, 2019 and 2018, as well as the corresponding percentage of our total revenue for each period (in thousands, except percentages):

In 2020, 2019 and 2018, our top ten customers represented 84.3%, 88.1%, and 92.9% of our revenue, respectively.

Revenue is recognized when obligations under the terms of a contract with our customer are satisfied; generally this occurs with the transfer of control of products or services. Revenue is measured as the amount of consideration we expect to receive in exchange for transferring products or providing services. A majority of our annual sales are denominated in U.S. dollars, but some sales from our Taiwan location and China-based subsidiary are denominated in NT dollars and RMB, respectively. For the year ended December 31, 2020, 36.3% of our total revenue was manufactured at our China-based subsidiary, with $12.8 million denominated in RMB and 55.9% of our total revenue was from products manufactured at our Taiwan-based facility with no revenue denominated in NT dollars. We expect a similar portion of our sales to be denominated in foreign currencies in 2021.

Cost of goods sold and gross margin 

Our cost of goods sold is impacted by variances arising from changes in yields and production volume, as well as increases or decreases in the cost of raw materials used in production. We typically experience lower yields and higher associated costs on new products. For our mature products, we can experience lower yields and higher production costs if customer requirements change or if we experience manufacturing difficulties or quality issues during our production process. Notwithstanding the foregoing, however, in general for our mature products our cost of goods sold for a particular product declines over time as a result of increasing efficiencies in the manufacturing processes, or supply cost declines, as well as yield improvements and testing enhancements.

We manufacture products in three of our four facilities located in the U.S., Taiwan and China. Generally, laser chips and optical components are manufactured in our Sugar Land facility, optical components and subassemblies are manufactured in our Taiwan facility, and optical components, subassemblies and optical equipment are manufactured in our China facility. Because of our vertical integration model, we generally utilize our own optical component products in our semi-finished and finished goods that we sell between and among our respective manufacturing operations. We base those internal sales upon established transfer pricing methodologies. However, we eliminate all of those internal sales, and cost of goods sold transactions, to arrive at total revenue and cost of goods sold on a consolidated basis.

We have a global set of suppliers to help balance considerations related to product availability, quality and cost. Components of our cost of goods sold are denominated in U.S. or NT dollars or RMB, depending upon the manufacturing location.

Gross profit as a percentage of total revenue, or gross margin, has been and is expected to continue to be affected by a variety of factors, including the introduction of new products, production volumes, the mix of products sold, the geographic region in which products are sold, changes in the cost and volumes of materials purchased from our suppliers, changes in labor costs, changes in overhead costs, reserves for excess and obsolete inventories and changes in the average selling prices of our products. Although our overall gross margins over the past three years have been between 21.5% and 32.8%, our gross margins vary more broadly on a product-by-product basis. Our newer and more advanced products typically have higher average selling prices and higher gross margins; however, until the product volumes scale, the gross margin from newer and advanced products may initially be lower. Within our markets, we may sell similar products to different geographic regions at different prices, and therefore realize different gross margins among those similar products. Our strategy is to improve our gross margins through vertical integration such as utilization of our own laser chips and optical sub-components in our solutions. We expect that our gross margins are likely to continue to fluctuate from quarter to quarter because of the variety of products we sell and the relative product mix within a quarter.

Operating expenses 

Our operating expenses consist of research and development, sales and marketing, and general and administrative expenses. Personnel costs are the most significant component of operating expenses and include salaries, benefits, bonuses and share-based compensation. With regard to sales and marketing expense, personnel costs also include sales commissions.

Research and development.

Research and development, or R&D, expense consists primarily of personnel costs, including share-based compensation for R&D personnel, and R&D work orders (that include material, direct labor and allocated overhead), as well as allocated development costs, such as engineering services, software and hardware tools, depreciation of capital equipment and facility costs. We record all research and development expense as incurred. Customers rely upon us to assist them with the development of new products and modification of existing products because of our extensive optical design and manufacturing expertise. We work closely with our customers in the critical design phase of product development and are occasionally reimbursed for some of these development efforts. We expect research and development expense to increase on a dollar basis, but will likely decrease as a percentage of our revenue to the extent that revenue increases over time.

Sales and marketing.

Sales and marketing expense consists primarily of personnel costs, including share-based compensation for our sales and marketing personnel, as well as travel and trade show expense, shipping and tariff expense, sales commissions and the allocation of overall corporate services and facility costs. We sell our products to customers who either incorporate our products into their offering or resell our products to end customers. Because we sell to a limited number of well-established customers, we employ a limited number of sales professionals who are able to cover large markets. We compensate our sales staff through base salary and commissions, with base salary being the largest component of overall compensation. Total sales commissions to employees amounted to less than one percent of our revenue in 2020, 2019 and 2018. Additionally, we pay commissions to third parties on certain product lines and identified customers, which also amounted to less than one percent of our revenue in 2020, 2019 and 2018. As such, our sales and marketing expense does not directly increase with revenue. In the future, we expect sales and marketing expense to increase on a dollar basis as we incrementally increase our overall sales activities, but expect our sales and marketing expense to decline as a percentage of revenue, to the extent our revenue increases over time.

General and administrative.

General and administrative expense consists primarily of personnel costs, including share-based compensation, primarily for our finance, human resources, legal and information technology personnel and certain executive officers, as well as professional services costs related to accounting, tax, banking, legal and information technology services, depreciation of capital equipment and facility costs. We expect general and administrative expense to increase as we continue to grow in both size and complexity as a public company. We expect rising costs including increased audit and legal fees, costs to comply with rules and regulations applicable to companies listed on a national stock exchange, as well as investor relations expense and higher insurance premiums. In the future, we expect general and administrative expense to increase on a dollar basis but to decline as a percentage of revenue, to the extent that our revenue increases over time.

Other income (expense) 

Interest income consists of income earned on our cash, cash equivalents and short-term investments. Interest expense consists of amounts paid for interest on our short-term and long-term debt borrowings, and convertible senior notes.

Other income (expense), net is primarily made up of government subsidizes income and foreign currency transaction gains and losses. The functional currency of our China subsidiary is the RMB and the foreign currency transaction gains and losses of our China subsidiary primarily result from their transactions in U.S. dollars. The functional currency of our Taiwan location is the NT dollar and the foreign currency transaction gains and losses of our Taiwan location primarily result from their transactions in U.S. dollars.

Income taxes

We are a U.S. registered company and are subject to income taxes in the U.S. We also operate in a number of countries throughout the world, including Taiwan and China. Consequently, our effective tax rate is impacted by the geographic distribution of our earnings or losses and the tax laws and regulations in each geographical region. We expect that our income taxes will vary in relation to our profitability and the geographic distribution of our profits. In 2020 our effective tax rate was (14.1%). In 2019 and 2018, our effective tax rate was (28.5%) and 78.1%, respectively. 

Our wholly owned subsidiary, Global Technology, Inc., has received preferential tax concessions in China as a national high-tech enterprise. In March 2007, China’s parliament enacted the PRC Enterprise Income Tax Law, or the EIT Law, under which, effective January 1, 2008, China adopted a uniform income tax rate of 25% for all enterprises including foreign invested enterprises. Global was recognized as a national high-tech enterprise in 2008 and was entitled to a 15% tax rate for a three year period. Global renewed its national high-tech enterprise certificate in 2011, 2014, 2017 and 2020, extending its three year tax preferential status through December 2023.

For the years ended December 31, 2020 and 2019, we had $0.2 million and $0.2 million, respectively, of unrecognized tax benefits related to U.S. tax benefits recognized for which we do not meet the more likely than not threshold.

See additional information regarding income taxes in Note O, included in Part II, Item 8 of this Form 10-K.

Seasonality 

We believe that the demand for our CATV products is seasonal. Historically, revenue derived from our CATV products has usually been highest in the second or third quarter and lowest in the first quarter of each year. The first quarter of the year has historically been negatively affected by reduced economic activity due to the Lunar New Year holiday and the lower level of deployment of outdoor CATV equipment in cold weather environments.  

We are uncertain whether the demand for our internet data center, telecom and FTTH products is seasonal, as our sales data does not indicate a significant trend with respect to these products. In 2017, we began to manufacture a meaningful quantity of internet data center products in our Ningbo, China factory. This factory experiences a lengthy shut-down associated with the Lunar New Year holiday which occurs in Q1 of each year. In addition to the factory shut-down, it is also common for employees in the factory to fail to return to work following resumption of operations. In the years 2020, 2019, and 2018, the percentage of employees in our China factory who resigned or were terminated during Q1, relative to the average number of employees during the quarter was 217%, 122%, and 90%, respectively.   However, we believe that the turnover in 2020 was higher than usual due to the COVID-19 pandemic which caused travel restrictions, additional health check requirements, and a lengthy shutdown of operations in Ningbo.  We believe that our employee turnover would likely have been lower in 2020 without these effects, but we cannot quantitatively estimate the turnover due to COVID-19.  As a result of this employee turnover, we must hire and train replacement employees. These replacement employees require a period of training and improvement, and this impacts the quantity of products we can produce in the quarter. The combined effect of the factory shut-down and employee turnover in the quarter may also contribute to negative seasonality in Q1.

Our gross margin varies quarter to quarter and varies primarily due to the product mix in a particular quarter, as well as from the level of manufacturing efficiencies, production yields (particularly in the laser chip fabrication process) and overall supply costs.

Results of Operations 

The following table set forth our results of operations for the periods presented and as a percentage of our revenue for those periods. The period-to-period comparison of our financial results is not necessarily indicative of our financial results to be achieved in future periods.

Comparison of Years Ended December 31, 2020 and 2019

Revenue 

We generate revenue through the sale of our products to equipment providers and network operators for the internet data center, CATV, telecom, FTTH and other markets. We derive a significant portion of our revenue from our top ten customers, and we anticipate that we will continue to do so for the foreseeable future. The following charts provide the revenue contribution from each of the markets we served for the years ended December 31, 2020 and 2019 (in thousands, except percentages):

The increase in revenue for the year was driven primarily by increased demand for our 100 Gbps transceivers in our data center market, and laser chips used in the manufacture of transceivers for 5G wireless communications in our telecom market. The increase in 100 Gbps demand includes increased demand from several existing customers, along with new customer additions.  We believe that some of this increase is related to increased demand for cloud-based services as a result of a shift to remote-working arrangements in the US and other areas, which in turn caused our customers to increase capacity in their data centers requiring more optical transceivers, especially 100 Gbps transceivers. The increase in 5G-related sales came mainly from customers in China, as wireless operators in that country have begun to deploy advanced 5G mobile networks. The slight increase in revenue for our CATV products is due to increased demand from CATV MSOs as they began to add capacity to their networks.  This increase in demand was at least partially attributable to network capacity expansion, particularly in the upstream direction, which is related to changes in network traffic due to increased working from home in the US earlier in the year.  Towards the end of 2020, we saw a slow-down in orders from certain customers in our datacenter and telecom markets.  We attribute the slowdown in datacenter business to absorption of previously-purchased inventory and in our telecom business to slow-down in the rate of deployment of new 5G mobile networks in China.  We believe that both of these effects are temporary and we expect that they should be resolved in 2021.

In the years ended December 31, 2020 and 2019, our top ten customers represented 84.3%, and 88.1% of our revenue, respectively. We believe that diversifying our customer base is critical for our future success, since reliance on a small number of key customers makes our ability to forecast future results dependent upon the accuracy of the forecasts we receive from those key customers.

Cost of goods sold and gross margin 

Cost of goods sold increased by $39.4 million, or 27.2%, from 2019 to 2020, primarily due to a 22.9% increase in sales over the prior year. The decrease in gross margin for the year ended December 31, 2020 compared to the same period ended December 31, 2019 was primarily the result of changes in the mix of products within our datacenter segment. In particular, we saw an increase in sales of certain lower-cost 100 Gbps transceivers, designed for shorter reaches within the datacenter, relative to sales of transceivers designed for longer reaches. This product mix resulted in an overall reduction in gross margin. Also contributing to the reduced gross margin was production inefficiencies, and higher costs of certain raw materials. 

Operating expenses 

Research and development expense 

Research and development expense was comparable between 2019 and 2020. Research and development costs consist of R&D work orders, R&D material usage and other project related costs related to 100 Gbps, 200/400 Gbps data center products, DOCSIS 3.1 capable CATV products, including remote-PHY products and 1.2 GHz-capable amplifier products,  and other new product development, and depreciation expense resulting from R&D equipment investments.

Sales and marketing expense 

Sales and marketing expense increased by $4.0 million, or 40.0%, from 2019 to 2020. These increases were primarily due to increase in commission expenses, duties and freight. These increases were partially offset by a decrease in trade show expenses and travel-related costs as a result of the COVID-19 pandemic.  As a result of the pandemic outbreak, the Company has modified many of its customary business practices by limiting employee travel including cancelling in-person participation in various meetings, events and conferences. 

General and administrative expense

General and administrative expense increased by $0.4 million, or 1.0%, from 2019 to 2020. These increases were primarily due to an increase in personnel-related costs, share-based compensation expense and insurance expense. These increases were partially offset by a decrease in legal expenses, some of which were paid by our insurance carrier rather than the Company, as legal expenses related to the first of our shareholder class action lawsuits have exceeded the retention in our insurance contract. 

Other income (expense), net 

Interest income decreased by $0.6 million, or 72.4% from 2019 to 2020. The changes are similar to expected rates of fluctuation with the interest rates and cash balances.

Interest expense increased by $0.2 million, or 4.3% from 2019 to 2020 due to higher average debt balances during the year.

Other income increased by $1.2 million, or 62.9% from 2019 to 2020.This increases was primarily due to the receipt of government subsidies associated with COVID-19 pandemic in Taiwan. 

Benefit (provision) for income taxes 

Our income tax provision consists of U.S. income tax, state taxes, and Taiwan and China income tax recorded during the periods. Our effective tax rate is affected by recurring items, such as tax rates in state and foreign jurisdictions and the relative amounts of income we earn in those jurisdictions.

We recorded a tax expense of $7.2 million for the year ended December 31, 2020 as compared to $14.7 million for the year ended December 31, 2019. The income tax expense in the year ended December 31, 2020 was primarily related to the change of the valuation allowance, deferred tax assets, and the recording of a valuation allowance on Taiwan and China deferred tax assets. The income tax expense recorded in the year ended December 31, 2019 was primarily related to recognition of research and development credits, offset by the recognition of a valuation allowance on our US and state deferred tax assets, and due to excess tax benefits attributable to share-based compensation, and as well as the tax rates in foreign jurisdictions.

Comparison of Years Ended December 31, 2019 and 2018

Revenue 

We generate revenue through the sale of our products to equipment providers and network operators for the internet data center, CATV, FTTH, telecom and other markets. We derive a significant portion of our revenue from our top ten customers, and we anticipate that we will continue to do so for the foreseeable future. The following charts provide the revenue contribution from each of the markets we served for the years ended December 31, 2019 and 2018 (in thousands, except percentages):

The decrease in revenue for the year was driven primarily by decreased demand for our 40 Gbps and 100 Gbps transceivers. The decrease in 100 Gbps demand was mostly from one major customer, while this decrease was partially offset by growth in 100 Gbps transceivers from another of our major customers. We believe that the decrease in 40 Gbps transceiver sales is related to a broad industry trend of reducing 40 Gbps infrastructure in favor of 100 Gbps infrastructure. The decrease in revenue in our CATV market for the year was mainly a result of reduced overall market demand for CATV outside plant products, which we attribute to reduced desire on the part of CATV MSOs to deploy capex to increase their network capacity. The decrease in revenue in our telecom market was primarily attributable to decreased demand for certain of our legacy telecom products by our customers, partially offset by sales of newer-generation products such as those designed for 5G mobile networks.

In the years ended December 31, 2019 and 2018, our top ten customers represented 88.1%, and 92.9% of our revenue, respectively.

Cost of goods sold and gross margin 

Cost of goods sold decreased by $35.0 million, or 19.5%, from 2018 to 2019, primarily due to a 28.6% decrease in sales over the prior year. The decrease in gross margin for the year ended December 31, 2019 compared to the same period ended December 31, 2018 was primarily the result of changes in the mix of products within our datacenter segment. In particular, we saw an increase in sales of certain lower-cost 100 Gbps transceivers, designed for shorter reaches within the datacenter, relative to sales of transceivers designed for longer reaches. This product mix resulted in an overall reduction in gross margin. Also contributing to the reduced gross margin was quality and testing costs that we incurred in the first part of the year.

Operating expenses 

Research and development expense 

Research and development expense decreased by $6.5 million, or 13.0%, from 2018 to 2019. Research and development costs consist of R&D work orders, R&D material usage and other project related costs related to 40 Gbps, 100 Gbps, and 200/400 Gbps data center products, DOCSIS 3.1 capable CATV products, including remote-PHY products, and other new product development, and depreciation expense resulting from R&D equipment investments. Research and development costs decreased from 2018 to 2019 due mainly to decreases in costs from R&D work orders, depreciation expense related to R&D equipment, and materials and supplies used in R&D activities. These decreases were offset by increases in personnel related costs.

Sales and marketing expense 

Sales and marketing expense increased by $0.9 million, or 10.1%, from 2018 to 2019. This increase was due to increases in personnel costs, share-based compensation expenses, duties and freight, and trade show expenses.

General and administrative expense

General and administrative expense increased by $2.0 million, or 5.0%, from 2018 to 2019. These increases were primarily due to an increase in share-based compensation expenses, depreciation expenses, insurance expenses and professional service fees, including legal expenses. These increases were partially offset by a decrease in personnel related costs.

Other income (expense), net 

Interest income increased by $0.6 million, or 228.0% from 2018 to 2019 due to higher interest rates and larger cash balances during the year.

Interest expense increased by $4.3 million, or 388.7% from 2018 to 2019 due to higher debt balances, including convertible senior notes and higher interest rates during the year.

Other income increased slightly from 2018 to 2019. This increase was primarily due to the receipt of government subsidies associated with our investments in new product development and for qualifying as a high-tech enterprise in China. These increases were partially offset by the decrease in foreign currency transaction gains.

Benefit (provision) for income taxes

Our income tax expense (benefit) consisted of U.S. income tax, state taxes, Taiwan and China income tax recorded during the periods. Our effective tax rate was affected by recurring items, such as tax rates in state and foreign jurisdictions and the relative amounts of income we earned in those jurisdictions.

We recorded a tax expense of $14.7 million for the year ended December 31, 2019 as compared to the tax benefit of $ 7.6 million for the year ended December 31, 2018. The income tax expense in the year ended December 31, 2019 was primarily related to the recognition of research and development credits, offset by the recognition a valuation allowance on our US and state deferred tax assets, and due to excess tax benefits attributable to share-based compensation, and as well as the tax rates in foreign jurisdictions. The income tax benefit recorded in the year ended December 31, 2018 was primarily related to the impact of changes to tax law, offset by the recognition of excess tax benefits attributable to share-based compensation as well as the recognition of research and development credits.

Liquidity and Capital Resources

As of December 31, 2020, we had $28.6 million of unused borrowing capacity from all of our loan agreements. As of December 31, 2020, our cash, cash equivalents, restricted cash and short-term investments totaled $50.1 million. Cash and cash equivalents are held for working capital purposes and are invested primarily in money market or time deposit funds.

On October 24, 2019, we filed a Registration Statement on Form S-3 with the Securities and Exchange Commission, which was declared effective on January 9, 2020, providing for the public offer and sale of certain securities of the Company from time to time, at our discretion, up to an aggregate amount of $250 million. 

On February 28, 2020, we entered into an Equity Distribution Agreement (the “Agreement”) with Raymond James & Associates, Inc. (the “Sales Agent”) pursuant to which the Company may issue and sell shares of the Company’s common stock, par value $0.001 per share (the “Shares”) having an aggregate offering price of up to $55 million from time to time through the Sales Agent.  Upon delivery of a placement notice and subject to the terms and conditions of the Agreement, sales, if any, of the Shares will be made through the Sales Agent in transactions that are deemed to be “at the market” offerings as defined in Rule 415 of the Securities Act of 1933, as amended (the “Securities Act”), including sales made through the facilities of the Nasdaq Global Market, the principal trading market for the Company’s common stock, on any other existing trading market for the Company’s common stock, to or through a market maker or as otherwise agreed by the Company and the Sales Agent. In the placement notice, the Company will designate the maximum number of Shares to be sold through the Sales Agent, the time period during which sales are requested to be made, the minimum price for the Shares to be sold, and any limitation on the number of Shares that may be sold in any one day. Subject to the terms and conditions of the Agreement, the Sales Agent will use its commercially reasonable efforts to sell Shares on the Company’s behalf up to the designated amount specified in the placement notice. The Company has no obligation to sell any Shares under the Agreement and may at any time suspend offers and sales of the Shares under the Agreement.

The Agreement provides that the Sales Agent will be entitled to compensation of up to 2% of the gross sales price of the Shares sold through the Sales Agent from time to time. The Company has also agreed to reimburse the Sales Agent for certain specified expenses in connection with the registration of Shares under state blue sky laws and any filing with, and clearance of the offering by, the Financial Industry Regulatory Authority Inc., not to exceed $10,000 in the aggregate, and any associated application fees incurred. Additionally, if the Agreement is terminated under certain circumstances, and the Company fails to sell a minimum amount of the Shares as set forth in the Agreement, then the Company has agreed to reimburse the Sales Agent for reasonable out-of-pocket expenses, including the reasonable fees and disbursements of counsel incurred by the Sales Agent, up to a maximum of $30,000 in the aggregate. The Company agreed to indemnify the Sales Agent against certain liabilities, including liabilities under the Securities Act, or to contribute to payments that the Sales Agent may be required to make because of any of those liabilities.

In March 2020, we commenced sales of common stock through an At-The-Market (ATM) Offering. The details of the shares of common stock sold through the ATM Offering through December 31, 2020 are as follows (in thousands, except shares and weighted average per share price): 

As of December 31, 2020, the total gross sales were $40.3 million and thus remaining amount of common stock we have available to sell under the ATM Offering is $14.7 million. The Company completed its ATM Offering in January 2021. Also refer to Note U “Subsequent Event” to the consolidated financial statements for further discussion of the Notes.

On March 5, 2019, the Company issued $80.5 million of 5% convertible senior notes due 2024, bearing interest at a rate of 5% per year maturing on March 15, 2024, unless earlier repurchased, redeemed or converted in accordance with their terms. The sale of the Notes generated net proceeds of $76.4 million, after expenses. Also refer to Note L “Convertible Senior Notes” to the consolidated financial statements for further discussion of the Notes.

The table below sets forth selected cash flow data for the periods presented (in thousands):

In 2020, net cash used in operating activities was $44.0 million. Net cash used in operating activities consisted of our net loss of $58.5 million, after the exclusion of non-cash items of $48.9 million, an increase in accounts receivable from our customers of $8.4 million and an increase in inventory of $23.7 million and decrease in accounts payable to our vendor of $3.3 million.

In 2019, net cash used in operating activities was $1.8 million. Net cash used in operating activities consisted of our net loss of $66.0 million, after the exclusion of non-cash items of $57.8 million, an increase in accounts receivable from our customers of $4.3 million and a decrease in accrued liabilities of $0.3 million. These cash decreases were offset by a decrease in inventory of $1.6 million, an increase in accounts payable to our vendors of $3.2 million, a decrease in prepaid tax of $1.0 million and a decrease in other current assets of $5.5 million.

In 2018, net cash provided by operating activities was $14.0 million. Net cash provided by operating activities consisted of our net loss of $2.1 million, after the exclusion of non-cash items of $38.5 million, an increase in accounts receivable from our customers of $29.3 million and an increase in accrued liabilities of $0.6 million. These cash increase were offset by an increase in inventory of $28.4 million, a decrease in account payable to our vendors of $13.7 million, a decrease in accrued income tax of $7.4 million and an increase in other current assets of $3.0 million.

Investing activities 

Our investing activities consisted primarily of capital expenditures and purchases of intangible assets.

In 2020, net cash used in investing activities was $19.3 million. The net cash used consisted of spending on China factory construction, purchase and prepaid of additional property, plant and equipment of $19.1 million.

In 2019, net cash used in investing activities was $32.1 million. The net cash used consisted of spending on China factory construction, purchase and prepaid of additional property, plant and equipment of $31.5 million.

In 2018, net cash used in investing activities was $76.5 million. The net cash used consisted of spending on property, plant and equipment and land use rights of $77.4 million offset by sales proceeds from equipment of $0.7 million.

Financing activities 

Our financing activities have historically consisted primarily of proceeds from the issuance of common stock and arrangements with various commercial lenders.

In 2020, our financing activities provided $47.4 million in cash. This increase in cash was due to $39.2 million of net proceeds from our At The Market (ATM) Offering, $6.2 million proceeds from PPP term loan, and $3.4 million net proceeds from acceptances payable and long-term debt. 

In 2019, our financing activities provided $42.6 million in cash. We received $76.4 million proceeds from the issuance of convertible senior notes offset by net bank loan and bank acceptance notes repayments of $32.9 million. These activities were offset by $0.9 million related to tax withholding associated with employee share-based compensation.

In 2018, our financing activities provided $34.8 million in cash. We received $38.8 million in net borrowings associated with our bank loans and bank acceptance notes. These activities were offset by $4.1 million related to tax withholding associated with employee share-based compensation.

On March 5, 2019, the Company issued $80.5 million of 5% convertible senior notes due 2024. The Notes will mature on March 15, 2024, unless earlier repurchased, redeemed or converted in accordance with their terms.

See Note K “Notes Payable and Long-term Debt” and Note L “Convertible Senior Notes” of our Consolidated Financial Statements for a description of our notes payable and long-term debt and convertible senior notes. 

China factory construction

On February 8, 2018, we entered into a construction contract with Zhejiang Xinyu Construction Group Co., Ltd. for the construction of a new factory and other facilities at our Ningbo, China location.  Construction costs for these facilities under this contract are estimated to total approximately $27.5 million. As of December 31, 2020, construction of the building is complete, and approximately $27.4 million of this total cost has been paid and the remaining portion will be paid in yearly installments for three years after final inspection. We anticipate additional expenses for building improvements to the factory and we are in the process of evaluating the timing of these expenditures and obtaining bids for any such work. 

Future liquidity needs 

We believe that our existing cash and cash equivalents, cash flows from our operating activities, and available credit will be sufficient to meet our anticipated cash needs for the next 12 months. Our future capital requirements will depend on many factors including our growth rate, the timing and extent of spending to support our research and development efforts, the expansion of our sales and marketing activities, the introduction of new and enhanced products, changes in our manufacturing capacity and the continuing market acceptance of our products.  In the event we need additional liquidity, we will explore additional sources of liquidity. These additional sources of liquidity could include one, or a combination, of the following: (i) issuing equity or debt securities, (ii) incurring indebtedness secured by our assets and (iii) selling product lines, other assets and/or portions of our business. There can be no guarantee that we will be able to raise additional funds on terms acceptable to us, or at all.

Contractual Obligations and Commitments 

The following summarizes our contractual obligations as of December 31, 2020 (in thousands):

Inflation 

We believe that the relatively low rate of inflation in the U.S. over the past few years has not had a significant impact on our sales or operating results or on the prices of raw materials. To the extent we expand our operations in China and Taiwan, such actions may result in inflation having a more significant impact on our operating results in the future.

Off-Balance Sheet Arrangements 

During 2020, 2019 and 2018, we did not have any off-balance sheet arrangements that we believe have or are reasonably likely to have a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that would be material to investors.

Critical Accounting Policies and Estimates

Our discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with U.S. GAAP. These principles require us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenue, expenses and cash flows, and related disclosure of contingent assets and liabilities. Our estimates include those related to revenue recognition, share-based compensation expense, impairment analysis of goodwill and long-lived assets, valuation of inventory, warranty liabilities and accounting for income taxes. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances. Actual results may differ from these estimates. To the extent that there are material differences between these estimates and our actual results, our future financial statements will be affected.

We believe that of our significant accounting policies, which are described in Note B to our consolidated financial statements appearing elsewhere in this Form 10-K, the following accounting policies involve a greater degree of judgment and complexity. Accordingly, we believe these are the most critical to fully understand and evaluate our financial condition and results of operations.

Long-lived assets

We evaluate the carrying value of long-lived assets for potential impairment when we determine a triggering event has occurred, or whenever events or changes in circumstances indicate that the carrying amount of such assets may not be recoverable. When indicators exist, recoverability of assets is measured by a comparison of the carrying value of the asset group to the estimated undiscounted future net cash flows expected to be generated by the asset. Examples of such triggering events include a significant disposal of a portion of such assets, an adverse change in the market involving the business employing the related asset, a significant decrease in the benefits realized from an acquired business, difficulties or delays in integrating the business, and a significant change in the operations of an acquired business. If such assets are determined not to be recoverable we perform an analysis of the fair value of the asset group and will recognize an impairment loss when the fair value is less than the carrying amount of such assets. The fair value, based on reasonable and supportable assumptions and projections, require subjective judgments. Depending on the assumptions and estimates used, the fair value projected in the evaluation of long-lived assets can vary within a range of outcomes. We consider the likelihood of possible outcomes in determining the best estimate for the fair value of the assets. We did not record any asset impairment charges in 2020, 2019 or 2018.

Valuation of inventories

Inventories are stated at the lower of cost (average-cost method) or market. Work in process and finished goods includes materials, labor and allocated overhead. We assess the valuation of our inventory on a periodic basis and provide an allowance for the value of estimated excess and obsolete inventory based on estimates of future demand. During the years ended December 31, 2020, 2019 and 2018, we recorded excess and obsolete inventory reserve charges of $3.9 million, $6.8 million, and $7.2 million, respectively. For the years December 2020, 2019 and 2018, the direct inventory write-offs related to scrap, discontinued products and damaged inventories were $20.4 million, $13.4 million, and $12.3 million, respectively.

We have an accounting policy to write down the value of obsolete inventory. We considered the following factors in our determination of the appropriate reserve level: how often we buy material in bulk; the overall market value of raw material, semi-finished goods and finished goods across our varied product lines and within markets; changes in expected demand for our products; the change in valuations historically; the determined safety stock for key customers; and the likelihood of postponement in delivery schedules for materials already placed in finished goods inventory.

Accounting for income taxes 

We account for income taxes in accordance with the provisions of ASC 740, Income Taxes. The liability method is used to account for deferred income taxes. Under the liability method, deferred tax assets and liabilities are measured using the enacted tax rates and laws that will be in effect when the differences are expected to reverse. The ability to realize deferred tax assets is evaluated annually and a valuation allowance is provided if it is unlikely that the deferred tax assets will not give rise to future benefits in our tax returns.

We record uncertain tax positions in accordance with ASC 740 on the basis of a two-step process in which (1) we determine whether it is more likely than not that the tax positions will be sustained on the basis of the technical merits of the position and (2) for those tax positions that meet the more-likely-than-not recognition threshold, we recognize the largest amount of tax benefit that is more than 50 percent likely to be realized upon ultimate settlement with the related tax authority.

On the basis of this evaluation, as of December 31, 2020, a valuation allowance of $10.6 million and $ 3.1 million has been recorded related to Taiwan and China deferred tax assets to recognize only the portion of the deferred tax assets that are more likely than not to be realized. The amount of the deferred tax assets considered realizable, however, could be adjusted if estimates of future taxable income during the carryforward period are reduced or increased or if objective negative evidence in the form of cumulative losses is no longer present and additional weight is given to subjective evidence such as our projections for growth.

We recognize interest and penalties related to unrecognized tax benefits on the income tax expense line in the accompanying consolidated statement of operations. Accrued interest and penalties are included on the related tax liability line in the consolidated balance sheet.

See additional information regarding income taxes in Note O of our Consolidated Financial Statements.

Recent Accounting Pronouncements 

See Note B of our Consolidated Financial Statements for a description of recent accounting pronouncements. 

Market Risks

Market risk represents the risk of loss that may impact our financial statements through adverse changes in financial market prices and rates and inflation. Our market risk exposure results primarily from fluctuations in foreign exchange and interest rates. We manage our exposure to these market risks through our regular operating and financing activities. We have not historically attempted to reduce our market risks through hedging instruments; we may, however, do so in the future.

Interest Rate Fluctuation Risk

Our cash equivalents consisted primarily of money market funds, and interest and non-interest bearing bank deposits. Our primary objective is to maintain the security of our principal balances and ensure liquidity. We attempt to maximize the return on these balances without significantly increasing risk, but have little opportunity to do so given the short-term nature of our investments and current interest rate environments. We do not anticipate any material effect on our cash balances or investment portfolio due to fluctuations in interest rates.

We are exposed to market risk due to the possibility of changing interest rates associated with certain debt instruments. As of December 31, 2020, our debt bears a variable rate of interest that is based on LIBOR or other interbank offered rates. The debt subject to variable rates is subject to fluctuation in the LIBOR or other interbank offered rates. As of December 31, 2020, we had not hedged our interest rate risk.

With respect to our interest expense for the three months ended December 31, 2020, an increase of 1.0% in each of our interest rates would have resulted in an increase of $0.4 million in our interest expense for such period.

Foreign Exchange Rates

We operate on an international basis with a large portion of our business conducted in our Taiwan branch and China subsidiary. We use the U.S. dollar as our reporting currency for our consolidated financial statements. The financial records of our China subsidiary and our Taiwan branch are maintained in their respective local currencies, the RMB and the NT dollar, which are the functional currencies for our China subsidiary and our Taiwan branch, respectively. Assets and liabilities are translated at prevailing exchange rates at the balance sheet date, equity accounts are translated at historical exchange rates and revenues, expenses, gains and losses are translated using the average rate for the then current period using a monthly average. Translation adjustments are reported as cumulative translation adjustments and are shown as a separate component of accumulated other comprehensive income in our statement of stockholders’ equity and comprehensive income.

All transactions in currencies other than their functional currencies during the year are subject to foreign exchange risk when the exchange rate fluctuates on the respective relevant dates of such transactions. Transaction gains and losses are recognized in our statements of operations in other income (expense). Monetary assets and liabilities existing at the balance sheet date denominated in currencies other than the functional currencies are re-measured at the exchange rates prevailing on the balance sheet date and unrealized exchange differences are recorded in our consolidated income statement. In October 2015, we determined that certain intercompany loans are long-term investments. Therefore, exchange gain (loss) arising from re-measurement of intercompany loans were recorded in the Cumulative Translation Adjustment accounts.

During the year ended December 31, 2020, we recognized less than $0.1 million of exchange gains arising from foreign currency transactions and re-measurement of monetary assets and liabilities dominated in non-functional currency on the balance sheet date.

During the year ended December 31, 2020, 5.5% of our revenue was denominated in RMB and none of our revenue was denominated in NT dollars. In the year ended December 31, 2020, 22.2% of our operating expenses were denominated in RMB and 23.7% of our operating expenses were denominated in NT dollars. Accordingly, fluctuations in exchange rates directly affect our cost of goods sold and net income (loss), and have a significant impact on our operating margins. If exchange rates of RMB and NT dollars for U.S. dollars were 1% higher during the year ended December 31, 2020, our operating expenses would have had been higher by $0.5 million.

As of December 31, 2020, we held the U.S. dollar denominated liabilities net of assets of approximately $3.6 million in our China subsidiary and $17.7 million in our Taiwan branch. With respect to these U.S. dollar denominated net assets as of December 31, 2020, if exchange rates of RMB and NT dollars for U.S. dollars were 1% higher during the year ended December 31, 2020, our other operating expenses would have been reduced by $0.2 million. Any significant revaluation of the RMB and NT dollars may materially and adversely affect the cash flows, revenues, and net income (loss) as reported in U.S. dollars.

We currently do not use derivative financial instruments to mitigate this exposure. We continue to review this issue and may consider hedging certain foreign exchange risks through the use of currency forwards or options in future years.

The information required by this item is incorporated by reference to the consolidated financial statements and accompanying notes set forth on pages F-1 through F-35 of this Form 10-K.

None.

The term “disclosure controls and procedures,” as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act, means controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the company’s management, including its principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure. Our disclosure controls and procedures are designed to provide reasonable assurance of achieving their control objectives.

Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures as of December 31, 2020. Based upon that evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of the end of the period covered in this report, our disclosure controls and procedures were effective.

Our management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) of the Exchange Act). Internal control over financial reporting is a process designed by, or under the supervision of, the issuer’s principal executive and principal financial officers, or persons performing similar functions, and effected by our board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of our financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that could have a material effect on the financial statements. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that our degree of compliance with the policies or procedures may deteriorate.

Our management conducted an evaluation of the effectiveness of our internal control over financial reporting as of the end of the period covered by this Form 10-K based on the framework in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organization of the Treadway Commission. Based on this evaluation, management concluded that our internal control over financial reporting was effective as of December 31, 2020.

Grant Thornton LLP, the independent registered public accounting firm that audited the consolidated financial statements included in this Form 10-K, has issued a report, included below, on the effectiveness of our internal control over financial reporting as of December 31, 2020.

There was no change in our internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) identified in connection with management’s evaluation required by the Rules 13a-15(d) and 15d-15(d) under the Exchange Act that occurred during our last fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM 

Board of Directors and Shareholders

Applied Optoelectronics, Inc.

Opinion on internal control over financial reporting 

We have audited the internal control over financial reporting of Applied Optoelectronics, Inc. (a Delaware corporation) and subsidiaries (the “Company”) as of December 31, 2020, based on criteria established in the 2013 Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2020, based on criteria established in the 2013 Internal Control—Integrated Framework issued by COSO. 

We also have audited, in accordance with the standards of the Public Company Accounting, Oversight Board (United States) (“PCAOB”), the consolidated financial statements of the Company as of and for the year ended December 31, 2020, and our report dated February 25, 2021 expressed an unqualified opinion on those financial statements.

Basis for opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Annual Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and limitations of internal control over financial reporting 

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ GRANT THORNTON LLP

Houston, Texas

February 25, 2021

None.

PART III 

The information required regarding our directors is incorporated herein by reference from the information contained in our definitive Proxy Statement for the 2021 Annual Meeting of Stockholders (our “Proxy Statement”), a copy of which will be filed with the Securities and Exchange Commission within 120 days after the end of our fiscal year ended December 31, 2020.

The information required regarding our executive officers is incorporated herein by reference from the information contained in our Proxy Statement.

The information required regarding Section 16(a) beneficial ownership reporting compliance is incorporated by reference from the information contained in our Proxy Statement.

The information required with respect to procedures by which security holders may recommend nominees to our board of directors, the composition of our Audit Committee, and whether the Company has an “audit committee financial expert”, is incorporated by reference from the information contained in our Proxy Statement.

Adoption of Code of Ethics 

The Company has adopted a Code of Business Conduct and Ethics (the “Code”) applicable to all of our board of director members, employees and executive officers, including our Chief Executive Officer (Principal Executive Officer), and Chief Financial Officer (Principal Financial Officer and Principal Accounting Officer). The Company has made the Code available on our website at http://www.ao-inc.com.

The Company intends to satisfy the public disclosure requirements regarding (1) any amendments to the Code, or (2) any waivers under the Code given to our Principal Executive Officer, Principal Financial Officer and Principal Accounting Officer by posting such information on our website at www.ao-inc.com. There were no amendments to the Code or waivers granted thereunder relating to the Principal Executive Officer, Principal Financial Officer or Principal Accounting Officer during 2020.

The information required regarding the compensation of our directors and executive officers is incorporated herein by reference from the information contained in the sections entitled “Summary Compensation Table,” “Director Compensation,” and “Compensation Committee Report” in our Proxy Statement.

The information required regarding security ownership of our 5% or greater stockholders and of our directors and management is incorporated herein by reference from the information contained in the section entitled “Security Ownership of Certain Beneficial Owners and Management” in our Proxy Statement.

The information required regarding securities authorized for issuance under our equity compensation plans is incorporated herein by reference from the information contained in the section entitled “Equity Compensation Plan Information” in our Proxy Statement.

The information required regarding related transactions is incorporated herein by reference from the information contained in our Proxy Statement.

The information required by Part III, Item 14, regarding principal accounting fees and services is incorporated by reference from the information contained in our Proxy Statement, a copy of which will be filed with the Securities and Exchange Commission within 120 days after the end of our fiscal year ended December 31, 2020.

Part IV 

(a)(1) The consolidated financial statements are listed on the Index to Consolidated Financial Statements to this report beginning on page F-1.

(a)(2) Financial Statement Schedules. Financial statement schedules have been omitted, as the information required to be set forth therein is included in the Consolidated Financial Statements or Notes thereto appearing in this Form 10-K.

(a)(3)  Exhibits. See the Exhibit immediately following Item 16. Form 10-K Summary of this Form 10-K.

None.

EXHIBIT INDEX