Applied UV, Inc. - Annual Report: 2020 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

APPLIED UV, Inc.

(Exact name of registrant as specified in its charter)

150 N. Macquesten Parkway

Mount Vernon, NY 10550

(Address of registrant’s principal executive offices) 

Registrant’s telephone number: (914) 665-6100

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes: ☐  No: ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.

Yes: ☒  No: ☐

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes: ☒  No: ☐

Indicate by check mark whether the registrant has submitted electronically, every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).

Yes: ☒  No: ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company, in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule12b-2 of the Act).

Yes: ☐  No: ☒

The aggregate market value of the voting and non-voting common stock held by non-affiliates of the registrant as of June 30, 2020: N/A.

At March 30, 2021, the registrant had 9,339,984 shares of common stock, par value $0.0001 per share, outstanding.

Table of Contents

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This report contains forward-looking statements. The forward-looking statements are contained principally in the sections entitled “Business,” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” These statements involve known and unknown risks, uncertainties and other factors which may cause our actual results, performance or achievements to be materially different from any future results, performances or achievements expressed or implied by the forward-looking statements. In some cases, you can identify forward-looking statements by terms such as “anticipates,” “believes,” “could,” “estimates,” “expects,” “intends,” “may,” “plans,” “potential,” “predicts,” “projects,” “should,” “would,” and similar expressions intended to identify forward-looking statements. Forward-looking statements reflect our current views with respect to future events and are based on assumptions and subject to risks and uncertainties. You should read these factors and the other cautionary statements made in this report and in the documents we incorporate by reference into this report as being applicable to all related forward-looking statements wherever they appear in this report or the documents we incorporate by reference into this report. If one or more of these factors materialize, or if any underlying assumptions prove incorrect, our actual results, performance or achievements may vary materially from any future results, performance or achievements expressed or implied by these forward-looking statements.

Given these uncertainties, you should not place undue reliance on these forward-looking statements. These forward-looking statements include, among other things, statements relating to:

Also, forward-looking statements represent our estimates and assumptions only as of the date of this report. You should read this report and the documents that we reference and file as exhibits to this report completely and with the understanding that our actual future results may be materially different from what we expect. Except as required by law, we assume no obligation to update any forward-looking statements publicly, or to update the reasons actual results could differ materially from those anticipated in any forward-looking statements, even if new information becomes available in the future.

Use of Certain Defined Terms

Except where the context otherwise requires and for the purposes of this report only:

PART I

Item 1. Business

Corporate History

The Company was incorporated in Delaware on February 26, 2019 for the purpose of acquiring all of the equity of SteriLumen and MunnWorks. The Company acquired all of the capital stock of SteriLumen in March of 2019 pursuant to two exchange agreements in which the stockholders of SteriLumen exchanged all of their shares in SteriLumen for shares of common stock in the Company. The Company acquired all of the membership interests in MunnWorks in July of 2019 pursuant to an exchange agreement in exchange for shares of common stock of the Company. The Company conducts all of its operations through SteriLumen and MunnWorks. The Company’s current acquisition strategy is to acquire disinfection device companies or other complimentary medical businesses that allow us to demonstrate the effectiveness of the SteriLumen Disinfection System and devise and test new products, while achieving revenue and earnings growth.

On February 8, 2021 we acquired substantially all of the assets of Akida Holdings LLC (“Akida”) for $901,274.96 in cash and 1.375 million shares of our common stock and no assumption of any long term debt or non-operating liabilities pursuant to an Asset Purchase Agreement dated February 8, 2021 among the Company, SteriLumen, Akida and Akida’s members (the “Acquisition”). Prior to the Acquisition, Akida was the manufacturer of the Airocide™ system of air purification technologies, originally developed by NASA with assistance from the University of Wisconsin at Madison, that uses a combination of UVC and a proprietary, titanium dioxide based photocatalyst that may help to accelerate the reopening of the global economy with applications in the hospitality, hotel, healthcare, nursing homes, grocer, wine, commercial buildings and retail sectors. The Airocide™ system has been used by brands such as NASA, Whole Foods, Dole, Chiquita, Opus One, Sub-Zero Refrigerators and Robert Mondavi Wines.

The Airocide air purification products complement those of SteriLumen, and the distribution agreement with Akida proved successful as Akida saw significant increase in sales during the pandemic. The Akida distribution agreement helped us understand and appreciate the impact and import placed on air disinfection by the customer base we were beginning to engage. The company witnessed some key demand drivers first hand that could be profitably monetized if Akida had access to more working capital. We plan to build a path to a faster time to units and revenues through our supply chain optimization and investment in marketing to boost distribution. Akida's revenue for the full calendar year 2020 was approximately $4.7 million with EBITDA of approximately $921,000.

Our principal executive offices are located at 8480 East Orchard Road, Suite 2400, Greenwood Village, CO 80111and our telephone number is 720-531-4152. The Company currently has 37 employees, including executive officers, all of which are fulltime. Our website address is www.applieduvinc.com. The information contained therein or accessible thereby shall not be deemed to be incorporated into this Prospectus.

SteriLumen

Business Overview. SteriLumen was incorporated on December 8, 2016 in New York. SteriLumen develops and may acquire medical devices that eliminate pathogens that may cause healthcare-acquiured infections (HAIs) for distribution primarily to facilities that have high customer turnover such as hospitals, assisted living facilities, doctors’ offices and walk-in clinics as well as hotels, cruise lines, schools, airplanes and other public spaces. SteriLumen has developed and designed a unique, patented and automated disinfecting system that relies on high powered LEDs in the “C” range of the ultraviolet spectrum (UVC) that are designed into devices that work with bathroom fixtures “SteriLumen Disinfecting System”), which we believe will be effective in reducing HAIs caused by viruses, bacteria, fungi and other pathogens, including the coronavirus causing COVID-19 and other human viruses around the bathroom sink and other high-touch, pathogen intensive surfaces..

The SteriLumen Disinfecting System was initially developed by Max Munn while working with NBBJ¹, a global architectural firm, and Healthcare Surface Consultants (“HSC”)². SteriLumen owns all of the patents and other intellectual property with respect to the SteriLumen Disinfecting System and NBBJ and HSC have waived any claims they may have to any interest in the SteriLumen Disinfecting System. The SteriLumen Disinfecting System has five product lines: (i) disinfecting back-lit mirror that replaces the typical mirror (and wall lighting) found above the sink in a public facility bathroom (in development); (ii) disinfecting drain device (on market); (iii) disinfecting shelf that can be installed above a sink, beneath an existing bathroom mirror, or above other high-contamination risk surfaces (on market); (iv) mirrored medicine cabinet for residential use (in development) and (v) retrofit kit (in development). The Company has received confirmation from the U.S. Food & Drug Administration that the SteriLumen Disinfecting System is not a “device” under Section 201(h) of the FDA Act and therefore the Company is not required to comply with the requirements of the FDA Act. However, SteriLumen’s devices are in compliance with the FDA’s March 2020 “Enforcement Policy for Sterilizers, Disinfectant Devices, and Air Purifiers. During the COVID-19 Public Health Emergency”. In addition, the disinfecting shelf (SteriLumen Ribbon) and drain (SteriLumen Drain) systems have received certification from Underwriters Laboratories (UL), the global leader in product safety testing and certification.

During the last three years SteriLumen has focused on design, development, and manufacturing of the SteriLumen Disinfecting System and has evolved the system to incorporate an application (Clarity D3™) for remote monotiring and management of, and reporting from the devices. The disinfection technology together with the application comprise SteriLumen’s Data Driven Disinfection™ platform which we believe to be the first and only safe, simple, and validated connected platform of its kind on the market.

We pursue validation of our platform in both laboratory and real clinical settings. Initial devices were independently tested in 2020 at ResInnova Laboratories, an International Antimicrobial Council certified BSL-2 testing facility. The disinfecting mirror and disinfecting drain devices were found to be effective in killing (3- 4 log reductions) the most infectious and clinically important pathogens including C. difficile, methicillin resistant staphylococcus aureus (MRSA), E. Coli, and OC43 human coronavirus, a strain structurally and genetically similar to SARS-CoV-2 and accepted as a surrogate for that virus. The Company is also sponsoring a study at Mount Sinai and its Icahn School of Medicine on the effectiveness of the SteriLumen Disinfecting System in patient bathrooms in a New York hospital in the Mount Sinai system. Mount Sinai has agreed to provide SteriLumen the results of their study in a report to be issued in the fourth quarter of 2021 as well as publishing their results in an academic, peer reviewed journal. The study performed under the Mount Sinai Agreement will be the first test of the SteriLumen Disinfecting System in a real worldhealthcare facility setting.

Since its inception, SteriLumen has devoted substantially all of its efforts to research and development, business planning, recruiting management and sales personnel, raising capital, developing relationships with potential suppliers and creating its own network of professional consultants. SteriLumen and Airocide product lines have manufacturing and assembly suppliers in Connecticut and Georgia in the United States, and Dongguan city in southern China; , and warehousing and distribution suppliers in California. By outsourcing the manufacturing, assembly, warehousing and distribution of our products, we can efficiently focus resources on design, marketing and sales while keeping overhead costs lower.

SteriLumen’s Airocide brands have enjoyed global sales in a variety of industries including healthcare, hospitality, grocery chains, wine making facilities, commercial real estate, schools, dental offices, and homes. As we bring the two brands together, delivering disinfection for both air and surfaces, initial sales efforts are targeting large commercial organizations in the sporting venue and hospitality markets in the US; we believe recent success here will support sales growth in the coming year. We intend to target international markets in Gulf Cooperation Council countries, China and Japan for both product lines, and continue to expand our global distributor network for Airocide

 SteriLumen’s Data Driven Disinfection™ platform includes products with the following attributes:

Focus on high-contamination surfaces Focuses on pathogens that accumulate on the sink area, including handles, faucets, backsplash and in the drain.

Germicidal UVC LEDs. The UVC LEDs in our devices have demonstrated destruction of the most clinically relevant pathogens causing HAIs as well as destructionof SARS-CoV2, the virus causing COVID-19 (99.8% elimination in 5 seconds at a distance of 2cm).

Automatic operation. Built-in programmable controller that ensures operation for the full UVC dosage required daily and is not dependent on manual operation. Its functionality is expandable and may become a source for recurring income through additional data reporting, leasing and maintenance of add-on elements. 

Continuous operation. Works in pre-programmed cycles that can be managed by a programmable controller. The motion detectors enclosed within each device allow continuous disinfection of high contamination areas as long as room occupants are within a safe distance of the device. Research has shown that microbes can rebound to pre-disinfection levels within two hours following manual terminal cleaning and disinfection. UVC products generally used for terminal cleaning in patient rooms have helped to reduce infections. Unfortunately, these can only be used after a patient is transferred/discharged and the patient room is vacant.

Safety. Built-in motion detector and sensor automatically shuts off the UVC light when anyone comes within range of the UVC light, eliminating safety concerns about UVC exposure. Once there is no movement in the room for 10 minutes the UVC light comes back on to restart and continue its cycle.

Removable UVC LED panel. The UVC LEDs are installed via removable panel forease of replacement or upgrade. The UVC LEDs are expected to become more powerful over time and users may want to replace the earlier generation UVC LEDs (at an interval and cost not yet determined) with more powerful models as the microbial world continues to change.

Ease of Installation. The unit is easy to install and uses standard electrical wiring.

Data and remote operations. The Clarity D3™ application enables Data Driven Disinfection™ with IOT connectivity using Wi-Fi, Bluetooth, and other RF technology for continuous transmission of use and functionality data for collection and analysis. Clarity D3 provides remote asset management and full visibility into the operation of the SteriLumen devices as well as efficacy reporting on the cycles that have run and subsequent cleanliness status. The app also enables Smart Maintenance, with LED cartridge lifecycle alerts, fault detection/reports and automatic system updates.

SteriLumen Drain. Consists of a stainless-steel pipe that is easily substituted for the ordinary pipe that fits between the bathroom sink drain cover and the C-trap. A UVC LED sits in a one-half inch perforation in the pipe in the plane of the interior of the pipe in order not to disrupt water flow. The UVC light destroys 6 logs (99.9999%) of the most common pathogens, thereby disinfecting the aerosol plume that rises out of the drain when the faucet is turned on.

SteriLumen Ribbon. Can be installed over sinks or other high-touch/contamination risk areas.

Airocide® Product Line

The Airocide technology is based on proprietary air purification designs and methods developed with NASA and the University of Wisconsin and licensed exclusively to the company, now owned by SteriLumen. The core technology is in use on the International Space Station and is based on photo-catalytic oxidation (PCO), a bioconversion process that continuously converts damaging molds, microorganisms, dangerous pathogens, destructive volatile organic chemicals (VOCs) and biological gasses into harmless water vapor.  Unlike other air purification systems that provide “active” air cleaning, ionization or “photo-electrochemical oxidation” Airocide’s nanocoating technology permanently bonds titanium dioxide to the surface of the catalytic bed. This permits the perpetual generation of surface-bound (OH-) radicals over the large surface area created by their advanced geometric design and prevents the generation and release of ozone and other harmful byproducts.  The proprietary formulation and methods for creating the catalyst are the basis of Airocide’s competitive advantage, making it the only consistently robust, highly effective, ozone free PCO technology on the market.

Airocide technology has been cleared by the FDA as a class II medical device, making it suitable for providing medical grade air purification in critical hospital settings such as operating rooms and surgical suites.

SteriLumen will market Airocide^® product lines: APS (consumer units) and the GCS and HD lines (commercial units) and will enable the commercial units with Clarity D3™ to bring connectivity, reporting and asset management to our air purification products. 

The APS series provides true, low maintenance filterless air purification ideal for residential and small or home office spaces. The GCS series is suitable for larger public spaces and enclosed rooms that may have high occupancy such as waiting rooms and hotel lobbies. The HD series is the most powerful, providing two-stage purification for fast sanitization of industrial spaces such as wine cellars, warehouses and food-processing facilities.

Product line for Hospitals

In October of 2020, we entered into an Exclusive Licensing & Joint Development Agreement with Axis Lighting to commercialize UVC devices for the hospital market. Axis Lighting is one of the largest independent architectural lighting companies in North America and operates a manufacturing facility with on-site design, engineering, and marketing staff to deliver high-performance LED luminaires for general, ambient and task lighting in offices, as well as in commercial and institutional spaces. BalancedCare™ by Axis provides healthcare lighting for wellness, offering patent-pending performance lighting for both visual comfort and functionality. BalancedCare™ addresses a number of requirements of today's complex healthcare environment, including infection control, and is supported and distributed through 98 Axis agents across North America.

Under the agreement, SteriLumen will work with Axis Lighting's BalancedCare™ team to leverage SteriLumen's intellectual property and proprietary know-how to commercialize a range of new LED-based technologies designed for use in the hospital sector. Axis will pay royalties to SteriLumen on sales of the commercial products developed through the collaboration. Our first jointly developed disinfection lighting fixture has completed the design phase and will launch later this year.

Markets

SteriLumen’s Data Driven Disinfection™ platform for surface and air disinfection addresses the pressing need in multiple markets to provide air and surfaces that are safe from disease-causing pathogens. The longevity of the pandemic and the increasing emergence of new strains of coronavirus in addition to other new pathogens creates a new normal where not only healthcare providers and patients, but customers, teachers, students and travelers are expecting disinfection and sanitization measures from employers, retail and hospitality establishments to protect the spaces they visit and occupy. SteriLumen and Airocide devices will help to keep environments safe and reduce the risk of transmission of disease causing pathogens such as coronavirus and healthcare-acquired infections (HAIs).

Pandemic Response and Preparedness

As Bloomberg reported in Dec 2020 (“Unsold U.S. Hotel Rooms Near 1 Billion as Lodging Crisis Deepens”), the coronavirus pandemic has cost hotels in the United States alone more than $46 billion in room revenue in 2020. Data from UBS Advisory Program and market data provider Statista estimates that the drop in foot traffic at US retail stores is down by nearly 35%, and the retail sector stands to lose up to 17% of stores over the next few years. Commercial vacancy rates are down significantly, but according to BOMA’s International Covid-19 CRE Impact Study, 74% of respondents believe in-person office space is vital to conducting successful business operations, validating demand for solutions to create safe office environments that enable employees to return to work.

Hospital Aquired Infections (HAIs)

The Centers for Disease Control (CDC) defines HAIs as infections patients contract, while receiving treatment in a healthcare facility. HAIs are a significant problem in the United States and the cause of an estimated 99,000 deaths annually. The CDC states that preventing HAIs is a national priority, citing the following sobering statistics:

HAI’s are preventable, and the federal government has instituted policies and penalties to ensure this issue is being addressed. In 2009, the Centers for Medicare and Medicaid Services (“CMS”) stopped paying hospital-related reimbursement for patients who acquired a HAI during their hospital stay. In 2011, CMS established fines for facilities with high rates of infection. The effects of reduced reimbursements have seriously impacted healthcare facilities with somereporting a reduction of up to 40% of their total revenue due to lost reimbursement.

Environmental disinfection is an important method in reducing the risk of HAIs. Evidence shows that traditional cleaning methods still leave persistent contamination of environmental surfaces.³ Without question, secondary disinfection technologies are needed for reducing the risk of surface contamination.

A big part of the challenge is controlling the presence of infectious agents in the patient room.

In SteriLumen’s platform for Data Driven Disinfection ™ addresses many of the issues that complicate effective disinfection of patient rooms and other areas at high risk for pathogen contamination including:

Restroom Designs: The bathroom is an area of high contamination. Toilets are located close to the sink and countertops. When flushed, they release a plume of microbial contamination into the air, ultimately landing on surfaces. Healthcare workers, the patient and visitors frequently use this room with many opportunities for acquisition and transmission of microbes throughout the patient care environment. Despite this, during a patient’s stay this room is typically cleaned only once a day.

Materials: Multiple surface materials and textiles cannot all be cleaned and disinfected effectively the same way. Surfaces that are not smooth can leave protective reservoirs for microbes to proliferate in and not be reached by the biocides used to destroy them.

Lack of Time: The average daily patient room disinfection time is 10 minutes (approximately 7 minutes for the main room and 3 minutes for the bathroom).

Despite best cleaning/disinfecting efforts, microbes can continue to thrive on surfaces for days, weeks, and even months.

Facilities understand the limitations of their current approach and are increasingly open to bundled or system-based solutions utilizing a variety of products and processes including “no touch” technology such as SteriLumen. No-touch systems are gaining acceptance by providing additional disinfection to the standard and required manual disinfection protocol described above. Many of these have been successful in addressing areas that may not have been disinfected effectively before. Examples of no-touch products include: (a) Hydrogen peroxide vapor or mist to get disinfectant into areas not always reached in the regular wipe-down, and (b) robotic systems that shine UVC light to kill bacteria. Each of these systems has significant limitations:

Room occupation: Both systems require that the room be unoccupied. As a result, they can only be used for “terminal” disinfection following patient discharge.

Line of sight: UVC systems require “line-of-sight” to the affected areas. Microbes on surfaces outside the line of sight of the light source are not affected. When used in a patient bathroom, for example, UVC robots cannot reach areas such as the inside of the sink bowl, drain, and areas behind the faucet.

The SteriLumen Disinfecting System can operate while the patient room is occupied and does not need human intervention.

UV Science & Technology

Ultraviolet light. Ultraviolet (“UV”) light is one form of electromagnetic energy produced primarily by the sun, although it can also come from man-made sources such as tanning beds and welding torches. UV light is a designated band of light (or electromagnetic energy) with wavelength from 100 to 400 nanometers (nm), which is shorter than visible light but longer than x-rays. UV light has enough energy to break chemical bonds. Due to their higher energies, UV photons can cause ionization, a process in which electrons break away from atoms. The resulting vacancy affects the chemical properties of the atoms and causes them to form or break chemical bonds that they otherwise would not. This can be useful for chemical processing, or it can be damaging to materials and living tissues. This damage can be beneficial, for instance, in disinfecting surfaces, but it can also be harmful, particularly to skin and eyes. UV is generally divided into three sub-bands: UVA, UVB, and UVC. Of the three, UVC has the shortest wavelength, the highest energy, and is most easily absorbed by most organic material.

UVC Disinfection. Using UV light to disinfect is a fast, effective, and safe technique that utilizes UVC. When exposed to UVC light, microorganisms such as bacteria, viruses, fungi, cysts, and mold are affected in a way such that they can no longer multiply, rendering them harmless. UV disinfection can be used on surfaces, in air, and in water. Disinfection performance is a function of the UVC dose applied to the microorganism. While all micro-organisms respond to UVC light in different ways, if given the appropriate dose, which is the product of UVC power multiplied by time, 99.99% of micro-organisms can be killed. Microorganisms such as bacteria, viruses, fungi, cysts, and mold are simple life forms that reproduce by subdivision, budding, or by producing spores. Reproduction of these organisms is vital to their life cycle: loss of their ability to grow and multiply is classified as cellular death, and renders them harmless and no longer pathogenic. When exposing microorganisms to UVC light, the energy generated from UVC light is absorbed into the microbes’ cellular RNA and DNA, damaging nucleic acids and preventing microorganisms from infecting and reproducing. The absorption of UVC energy forms new bonds between nucleotides, creating double bonds or “dimers.” Demineralization of molecules, particularly thymine, is the most common type of damage done to microorganisms by UVC. Formation of thymine dimers in the DNA of bacteria, fungi and viruses prevents replication and the ability to infect. Because UVC disinfection does not rely on chemicals or filtration materials, it can be used effectively and safely in many applications including in drinking water, in air.

LEDs. The traditional approach to generating UV light for disinfection applications has been the mercury discharge lamp, which is a fluorescent bulb without the phosphor coating. Recent advances in LED technology produced novel UV LEDs that generate specific UV wavelengths from solid-state microchips. Miniature, robust, and operating with a low electrical power, UV LEDs, unlike traditional mercury lamps, deliver highly stable output at the specific wavelengths needed for the application. LEDs also allow flexibility in design and can be arranged in a variety of designs includingflat panels, on flexible circuit boards, on the outside of cylinders and elsewhere.

Intellectual Property

Developing and maintaining a strong intellectual property position is an important element of our business. We maintain the intellectual property through a combination of patent protection, trademarks, and trade secrets. We have sought, and will continue to seek, patent protection for our technology, for improvements to our technology, as well as for any of our other technologies where we believe such protection will be advantageous.

As of March, 2021, SteriLumen owned seven issued patents and two pending patent applications in the United States; one issued patent in the European Union and 6 pending patent applications, which are pending in China, the Gulf Cooperation Council (GCC), Hong Kong, Japan, South Korea, and Taiwan.  The company’s pending U.S. patent applications are for Drain Disinfecting Device and method of installing the same and system for neutralizing pathogens on tactile surfaces. The issued patents and pending patent applications cover various aspects of the SteriLumen Disinfecting Systems including disinfection systems embedded into plumbing fixtures and vanity mirrors, and the mechanical components used in conjunction with such mirrors.

On December 3, 2019, SteriLumen received a trademark registration of its trademark or brand name “SteriLumen.”

The Airocide® products are covered by numerous international trademarks as well as 2 issued and one pending United States patents and their counterparts in Australia, Brazil, Canada, China, European Community, Gulf Cooperation Council, Hong Kong, India, Japan, Korea, Mexico, Russian Federation, Taiwan, United Arab Emirates and United Kingdom. The Airocide family of patents protects the design of the consumer unit as well as specific utility of how the device works. The pending and issued patents cover, and are entitled “Photocatalytic Air Treatment System and Method”, “Air Treatment System,” “Air Purification System” and “Air Purification Device”. Certain aspects of the Airocide® technology concerning the specific implementation of the catalyst, reaction chamber, and geometry are covered by trade secret.

SteriLumen will protect and enforce its issued patents, trade secrets, know-how, copyrights, and trademarks, as well as continuing to pursue technological innovation and licensing opportunities, and developing and maintaining its competitive position in the vanity mirror and disinfecting product markets for hospitality, hospital and healthcare facilities. Our success depends in part on SteriLumen obtaining and enforcing patent protection for its products and processes, preserving and maintaining trade secrets, issued patents, copyrights and trademarks, and operating with state-of-the-art technologies while respecting the proprietary rights of third parties, and acquiring licenses for technology or products as may be beneficial to the company.

Our Strategy

AUVI seeks to acquire products, companies and technologies to complement its business in infection control and expand its offerings that protect people and environments from dangerous pathogens. We will also consider select acquisitions in medical devices or equipment that can be sold to the same customer base as our current products, which give us access to significant new markets, or which meet unmet needs in our current markets.

For our SteriLumen subsidiary, we believe that together, SteriLumen and Airocide devices represent safe, effective, unique and patented disinfecting systems that may significantly reduce the number of pathogens found in healthcare, industrial, educational and commercial facilities. Our initial targets for the combined solution of SteriLumen and Airocide are large commercial organizations in the sporting venue and hospitality markets in the United States.

Our goal is to build a company that successfully designs, develops and markets our platform for Data Driven Disinfection which will enable national economies to re-open and provide safe environments during and following the pandemic. Our platform will also be positioned to help decrease the national rate of HAIs. We will seek to achieve this goal by having SteriLumen actively involved in the following activities:

Other Market Segments

Beyond healthcare facilities, we are prioritizing our opportunities in additional market segments:

Airplane and Cruise Line Bathrooms. Because of the close quarters inside most airplane cabins, pathogens can easily be spread among passengers, especially on long flights where airplane bathrooms have more use and may not be cleaned before flight’s end. SteriLumen’s Data Driven Disinfection platform could provide an important means for disinfecting airplane bathrooms, keeping track of cleanliness during flights, and decreasing the spread of germs in the airplane cabin.

Schools. Schools and education authorities pay very close attention to disinfection to prevent the spread of influenza as well as other contagious threats. The CDC maintains guidelines for disinfection of schools and many other organizations also advise schools on proper disinfection protocol. SteriLumen’s disinfection systems could find a receptive audience among school facilities managers looking for new solutions to this issue.

Restaurants. Given the need to prevent foodborne illness, restaurants are constantly urging staff to wash their hands and are required by public health authorities to keep their premises as clean and germ-free as possible. SteriLumen could become part of upscale restaurants’ strategy to demonstrate dedication and commitment to customers and health department to reduce the spread of infections within their establishment.

Homes. Our Airocide brands have a strong foothold in the consumer marketplace and we will expand digital marketing activities to gain greater market share.

Competition

Given the uniqueness of the SteriLumen Disinfection Platform, we are not aware of any direct competition. However, there are indirect competitors utilizing UVC in ceiling and robot configurations as well as other no-touch chemical and “fog” disinfection systems.

No-touch Systems. No-touch systems have increased in popularity in recent years as complimentary and add on systems for addressing infection prevention issues following required cleaning and disinfection protocols. These have proven to be effective with a few major drawbacks. They are used only following patient transfer or discharge and cannot be used while the patient room is occupied. Due to the high cost for no touch systems, healthcare facilities generally choose one of several no-touch options, either UVC robots or peroxide vapor. An additional issue exists based on the available time for terminal disinfection if patients are waiting for a room or if staff is simply too busy to move this technology into the room and turn it on and off. Depending on the technology, the disinfecting system may need to be moved into the bathroom (additional cycle time) due to the constraints of the technology.

This system requires approximately 2 hours’ time in a completely sealed off room plus additional time to allow the air to clear before anyone can remove the seals put in place.  

UVC systems. UVC disinfection is fast and very effective on surfaces in line of sight. Products on the market include but are not limited to ceiling mounted, wall-mounted, upper air UV disinfection units as well as UVC robots. Larger robot units recommend that their units be moved periodically to address critical areas that may be limited by shadowing or areas outside of the direct line of sight. Typically, the larger robots are used for terminal cleaning when the patient is discharged as a room must be empty to run these units. There are several manufacturers currently developing other products including smaller portable units that could be put in a patient room while the patient is receiving treatment elsewhere in the hospital. The competitive advantage of the SteriLumen system is its use of UVC LEDs. All of the below systems which generate UV light use mercury or xenon bulbs which are inherently dangerous if mishandled.

Peroxide vapor systems. Hydrogen peroxide vapor systems use machines to disperse a concentrated hydrogen peroxide vapor throughout a room. The micro condensation of the system on all surfaces deactivates harmful pathogens. The peroxide condensate breaks down to oxygen and water vapor, which means there is no harmful residue. Like UVC robot systems, peroxide vapor systems cannot be run when a patient is in the room. Furthermore, there is a need to seal the room and for personnel to wear hazmat suits during the disinfection process.

Competition in Air Purification

The Airocide technology is unique in the marketplace, offering numerous advantages over legacy technologies currently on the market such as HEPA filtration methods. Air purifiers relying on filter media, such as HEPA, trap contaminants, but can allow microscopic viruses to pass through unaffected. Ionizers or ozone generators can cause health issues when utilized in confined spaces. Electrostatic filters can quickly become contaminated and rendered ineffective. Unlike these conventional technologies, Airocide relies on a photo-catalytic reaction that enables it to destroy, rather than trap, even the most minute organic impurities in the air. From viruses to mold spores to volatile organic gases, Airocide offers unmatched efficacy in air purification technology as demonstrated in multiple independent laboratory tests.

MunnWorks

MunnWorks was formed on November 9, 2012, as a New York limited liability company. manufactures and supplies fine decorative framed mirrors, framed art, and vanities to primarily to the hospitality market. Max Munn, the President of Applied UV, is also the Chief Executive Officer of MunnWorks and has been involved in related businesses for over 35 years. MunnWorks manufactures its products domestically and overseas. Its domestic manufacturing operations are located in its headquarters in Mount Vernon, New York. MunnWorks supplies the major hotel brands in North America with its products. These brands include Hilton Hotels & Resorts, the various Hyatt branded hotels, the various Marriott branded hotels, Four Seasons Hotels and Resorts and the subsidiary hotel brands for each of these major brands. MunnWorks has a national sales force and an established distribution network for hotels and restaurants in every major market in the United States and has begun to develop a distribution network for the assisted living market. These distribution networks will also be a significant asset for SteriLumen, as those networks will be utilized for the marketing and sales of the SteriLumen Disinfecting System. Additionally, MunnWorks advertises its products in hotel design magazines and participates in major national trade shows. During the last three years, MunnWorks has significantly expanded its sales force, including hiring a vice president of sales, increased investments in advertising, including expanding its presence at industry trade shows and full-page advertising in trade magazines such as Boutique Design and Hospitality Design and establishing a presence on social media outlets such as Facebook, Instagram, and Twitter. MunnWorks currently manufactures approximately 20% to 25% of its products domestically, but expects this to increase to 35% due to increasing lead times, production costs and tariffs associated with manufacturing goods in China. We consider MunnWorks to be a leader in the custom design decorative framed mirror market. Our main competitors are Majestic Mirror located in Miami, Florida and Mirror Image located in Los Angeles who make decorative mirrors for hotels and Electric Mirror located in Seattle Washington who make backlit mirrors that are placed over vanities in the bathroom. None of these competitors have any meaningful domestic manufacturing capability.

On June 25, 2018, MunnWorks filed a voluntary petition for reorganization pursuant to Chapter 11 of the Bankruptcy Code in order to (i) pursue its appeal of a $1.4 million New York State court judgment arising out of an employment and business dispute with a former employer of Mr. Munn (of which Mr. Munn’s family-owned 50% of the equity) and (ii) preserve its ongoing operations from collection efforts with respect to such judgment. MunnWorks settled the dispute by making a $400,000 cash payment and on June 28, 2019, concluded its Chapter 11 proceedings.

Item 1a. Risk Factors.

The Company is a smaller reporting company as defined by Rule 12b-2 of the Exchange Act and is not required to provide the information required under this item.

Item 1B. Unresolved Staff Comments

None. 

Item 2. Properties.

We lease and maintain our primary offices and manufacturing facility at 150 N. Macquesten Parkway, Mount Vernon, NY 10550. We also lease offices at 8480 East Orchard Road, Greenwood Village, Colorado 80111. We do not currently own any real estate.

Item 3. Legal Proceedings

From time to time, we may be subject to legal proceedings and claims in the ordinary course of business. We may in the future receive claims from third parties asserting, among other things, infringement of their intellectual property rights. Future litigation may be necessary to defend ourselves, our partners and our customers by determining the scope, enforceability and validity of third-party proprietary rights, or to establish our proprietary rights. The results of any future litigation cannot be predicted with certainty, and regardless of the outcome, litigation can have an adverse impact on us because of defense and settlement costs, diversion of management resources, and other factors. To date, we have not been made aware of any actual, pending or threatened litigation against the Company.

Item 4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market Information

Our common stock has been traded on the Nasdaq Capital Market market under the symbol AUVI since August 31, 2020. Prior to that time there was no public market for our stock. The following table sets forth the high and low sales prices per share of our common stock during each quarter of the last fiscal year since trading began on August 31, 2020 as reported by The Nasdaq Stock Market LLC:

Holders

As of December 31, 2020 there were 7,945,034 shares of our common stock issued and outstanding held by 15  stockholders of record. The actual number of stockholders is likely greater than this number of record holders, and includes stockholders who are beneficial owners, but whose shares are held in street names by brokers and other nominees. 

Dividends

We have never declared or paid any cash dividend on our common stock. We intend to retain any future earnings to finance the operation and expansion of our business and fund our share repurchase program, and we do not expect to pay cash dividends in the foreseeable future.

Transfer Agent

The transfer agent for the common stock is Vstock Transfer LLC, 18 Lafayette Place, Woodmere, New York, telephone (212) 828-8436.

Recent Sales of Unregistered Securities

See “Item 11. Executive Compensation—Employment Agreements” below.

Such common stock was issued pursuant to the exemption from the registration requirements of the Securities Act provided by Section 4(a)(2) thereof and/or Regulation D thereunder.

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

None.

Item 6. Selected Financial Data.

The Company is a smaller reporting company as defined by Rule 12b-2 of the Exchange Act and is not required to provide the information required under this item

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Overview

The Company was formed on February 26, 2019 for the purpose of acquiring all of the equity of SteriLumen and MunnWorks. The Company acquired all of the capital stock of SteriLumen in March of 2019 pursuant to two exchange agreements in which all of the stockholders of SteriLumen exchanged their shares in SteriLumen for shares of common stock in the Company. The Company acquired all of the equity of MunnWorks in July of 2019 pursuant to an exchange agreement in exchange for shares of common stock in the Company. The Company conducts all of its operations through SteriLumen and MunnWorks.

Sterilumen was formed to engage in the design, manufacture, assembly and distribution of the SteriLumen Disinfecting System for use in hospitals and other healthcare facilities. The Company has received several patent approvals for the SteriLumen Disinfecting System from the United States and the European Union and is in the process of receiving approval from various countries including China, Japan, Taiwan, South Korea and the Gulf Cooperation Council. The technology of the SteriLumen Disinfecting System uses UVC LED embedded in various bathroom fixtures or as a stand alone unit as a disinfection apparatus for use in inhabited facilities for killing airborne bacteria and other pathogens as well as killing bacteria and other pathogens residing on hard surfaces in proximity to the apparatus.

Following the Company’s initial public offering, product development efforts were accelerated. The system’s technology development roadmap, including connected and data-enabled capabilities has been refined and the Clarity D3 application will be launched along with the updated version of the SteriLumen Ribbon (now branded Lumicide™) in the fall of 2021. The Company has also achieved UL certification for both the stand-alone Ribbon, and integrated Drain products, ensuring that we meet requirements of commercial customers who rely on the UL mark as evicence of safety, quality and reliability. 

The Company works with distributors to sell both SteriLumen and MunnWorks product lines, and is in the process of signing up new SteriLumen distributors of significant breadth and scale to introduce the SteriLumen products to new markets, including building management, commercial real estate, and environmental health and safety.

MunnWorks is a manufacturer of custom designed fine mirrors specifically for the hospitality industry with one manufacturing facility in Mount Vernon, New York. Our goal is to contribute to the creation of what our design industry clients seek: manufacturing better framed mirrors on budget and on time. As part of our long-term strategy, we have instituted multi-site production for high-value items, complicated designs and finishes. Our headquarters in Mount Vernon, NY serves as the center for multi-country manufacturing. We work with a satellite network of artisans and craftsmen, including gilders, carvers, and old-world finishers.

In addition to our domestic partners, we maintain overseas production capability with on-site MunnWorks employees. Moreover, as company policy, we conduct on-site factory visits for all in-process and outgoing orders, which are observed and checked by a project manager from our home office in Mount Vernon, NY before they leave our overseas partners’ facilities. The combination of quality, innovative, stylish merchandise, and value pricing has led us to develop a loyal customer base.

Principal Factors Affecting Our Financial Performance

Our operating results are primarily affected by the following factors:

Results of Operations

Year Ended December 31, 2020 Compared to the Year Ended December 31, 2019

Net sales and gross profit are the most significant drivers of our operating performance. Net sales consist of all sales to customers, net of returns. Our net sales for year ended 2020 decreased by 58.7% to $5,732,734 from $9,095,150 in year ended 2019. All net sales for all periods presented were substantially generated from our MunnWorks subsidiary. Revenues and margins were significantly impacted from the suspension of operations of hotels and the impact to the hospitality industry from the COVID-19 pandemic.

Accordingly, gross profit expressed as a percentage of net sales can be influenced by many factors including overall sales performance. For year ended 2020, gross profit decreased 205.7% to $1,009,336 from $3,085,420 for year ended 2019. Gross profit as a percentage of net sales decreased to 17.6% for year ended 2020 from 33.9% in year ended 2019, primarily driven by a significant decrease in sales generated from our domestic manufacturing. Major components and cost drivers of our cost of sales is influenced by the cost of materials, freight, overhead, and labor costs. In order to comply with the payroll protection program foregiveness requirements, the company kept many of their employees and there was significant downtime charged to cost of sales. Direct overhead costs from year to year remained consistent which resulted in higher overhead costs as a percentage of revenue. In addition, the company lowered its prices in order to stay competitive within the market.

Operating expenses, including the costs of operating our corporate office, are also an important component of our operating performance. Compensation and benefits comprise the majority of our operating expenses. Operating expenses contain fixed and variable costs and managing the operating expense ratio (operating expenses expressed as a percentage of net sales) is an important focus of management as we seek to increase our overall profitability. Operating expenses include cash costs as well as non-cash costs, such as stock based compensation and depreciation and amortization associated with corporate and property and equipment and impairment of long-lived assets. Operating expenses can also include certain costs that are of a one-time or non-recurring nature. For year ended 2020, Operating expenses increased 55.67% to $4,322,228 from $1,916,386 in year ended 2019. The change was primarily driven from an increase in professional fees, office salaries, research and development costs and stock based compensation. During 2020, the company hired a Chief Executive Officer, Chief Operations Officer, Vice President of Global Sales, and Vice President of Product Marketing and Corporate Development. The president of the company also took a $400,000 salary in 2020 that was not taken in 2019.

Net other income was $10,936 in year ended 2020, compared to net other income of $1,504,663 in year ended 2019, representing a decrease of $1,493,727. The decrease from 2019 was primarily due to a gain on settlement of $1,520,399 from the Chapter 11 Bankruptcy Case that was recorded in 2019. As a result of settlement in the bankruptcy case, the Company was able to settle certain liabilities at a significantly reduced amount. The difference between the carrying amount of the liability and the settled amount was recorded as a gain on settlement as other income.

Income tax expense was $66,854 in year ended 2020, compared to income tax expense of $106,801 in year ended 2019, representing a decrease of $40,007. The Company did not have income in 2020 and the amount expensed in 2020 related to a true up adjustment for 2019 taxes owed.

Liquidity and Capital Resources

Year Ended December 31, 2020 Compared to the Year Ended December 31, 2019

In year ended 2020, net cash used in operating activities was $645,197, as compared to cash provided in operating activities was $770,260 in year ended 2019. Our operating cash inflows include cash received primarily from sales of our product and a decrease in accounts receivable of $1,944,805. These cash inflows are offset largely by cash paid primarily to our suppliers for production materials and parts used in our manufacturing process, operation expenses, employee compensation, and interest expenses of our financings. The major operating activities that reduced cash in the year ended 2020 was a net loss of $3,368,810, decrease of deferred revenue of $638,234, and an increase in prepaid expenses of $122,562.

In year ended 2020, net cash used in investing activities was $230,667, as compared to cash used from investing activities of $12,999 in year ended 2019. The Company purchased additional equipment, incurred additional patent costs and expended funds on leasehold improvements.

In year ended 2020, cash provided by financing activities was $11,603,858, as compared to cash used in financing activities of $521,091 in year ended 2019. The major financing activity that provided cash for year ended December 31, 2020 was cash received from a payroll protection program loan of $296,827 and cash received from equity raises in the amount of $11,309,510. The major financing activities that used cash in year ended 2019 were repayments for loans of $83,000 and cash paid to settle liabilities subject to compromise of $531,511.

Working Capital. We had working capital of $9,649,096 at December 31, 2020, an increase of $9,154,974 from a working capital of $494,122 as of December 31, 2019. The increase in working capital is attributable from an increase in cash of $10,727,994, an increase of prepaid expenses of $127,859, and a decrease of deferred revenue of $638,234 offset by a decrease in accounts receivable of $1,994,806 and an increase of current payroll protection plan loan of $69,927.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

The Company is a smaller reporting company as defined by Rule 12b-2 of the Exchange Act and is not required to provide the information required under this item.

Item 8. Financial Statements and Supplementary Data.

Applied UV, Inc. and Subsidiaries

Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

Applied UV, Inc. and Subsidiaries

Index to the Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

Applied UV, Inc. and Subsidiaries

Consolidated Balance Sheets

As of December 31, 2019 (As Restated) and 2018

See accompanying notes to the financial statements.

Applied UV, Inc. and Subsidiaries

Consolidated Statements of Income

For the Years Ended December 31, 2019 (As Restated) and 2018

See accompanying notes to the financial statements.

Applied UV, Inc. and Subsidiaries

Consolidated Statements of Changes in Stockholders’ Equity (Deficit)

For the Years Ended December 31, 2019 (As Restated) and 2018

See accompanying notes to the financial statements.

Applied UV, Inc. and Subsidiaries

Consolidated Statements of Cash Flows

For the Years Ended December 31, 2019 (As Restated) and 2018

See accompanying notes to the financial statements.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 1 - SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Nature of Business

In March 2019, Applied UV, Inc. (the “Company”) was formed and incorporated in the State of Delaware for the intended purpose of creating a legal holding company structure for SteriLumen, Inc. and Munn Works, LLC and any future potential mergers or acquisitions. The then-existing shareholders and members of SteriLumen, Inc. and Munn Works, LLC exchanged all of their interest for shares of Applied UV, Inc. with substantially similar economic voting interests for each shareholder immediately before and after the share exchange. As a result of the share exchange, SteriLumen, Inc. and Munn Works, LLC became wholly-owned subsidiaries of Applied UV, Inc and, collectively referred to as (the “Company”). The combination met the criteria outlined in ASC 850 to be accounted for as a transaction between entities under common control and therefore the financial statements are being presented as if the transfer happened at the beginning of the period and prior year financial information has been retrospectively adjusted to furnish comparative information.

SteriLumen, Inc. is engaged in the design, manufacture, assembly and distribution of automated disinfecting mirror systems for use in hospitals and other healthcare facilities. The Company was incorporated in the State of New York in November of 2012 and is headquartered in Mount Vernon, New York. Munn Works, LLC is engaged in the manufacture of fine mirrors specifically for the hospitality industry.

Basis of Presentation

The accompanying consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“US GAAP”).

Principles of Consolidation

The consolidated financial statements include the accounts of Applied UV, Inc., Munn Works, LLC and SteriLumen, Inc. All significant intercompany transactions and balances are eliminated in consolidation.

Restatement

Restatement of Financial Statements- The Company has restated herein its audited consolidated financial statements for the year ended December 31, 2019. While preparing its annual report for the year ended December 31, 2020 the Company identified an error in the timing of recognizing certain revenues. We erroneously recognized revenues in the amount of $234,570 in the fourth quarter of 2019. For the year ended and as of December 31, 2019, revenue was overstated by $234,570 and deferred revenue was understated by $234,570, respectively. See Note 16 for additional information.

Concentration of Credit and Business Risk

At times throughout the year, the Company maintains cash balances at various institutions, which may exceed the Federal Deposit Insurance Corporation limit. As of December 31, 2019 and 2018, amounts of $37,029 and $459,543, respectively were in excess of FDIC insured limits.

The Company provides credit in the normal course of business. The Company performs ongoing credit evaluations of its customers and maintains allowances for doubtful accounts based on factors surrounding the credit risk of specific customers, historical trends and other information.

For the year ended December 31, 2019, the Company had four major suppliers that accounted for approximately 78% of supplies and materials used by the Company and for the year ended December 31, 2018, the Company had three major suppliers that accounted for approximately 76% of supplies and materials used by the Company. The amounts have been recorded as costs of sales in the consolidated statements of income.

Cash and Cash Equivalents

The Company considers all time deposits, certificates of deposit and all highly liquid debt instruments purchased with maturities of three months or less to be cash equivalents. The Company does not have any cash equivalents at December 31, 2019 and 2018.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 1 - SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (continued)

Use of Estimates

The preparation of consolidated financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amount of assets and liabilities and reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Accounts Receivable

Accounts receivable are non-collateralized customer obligations due under normal trade terms generally requiring payment within 30-60 days from the invoice date. The carrying amounts of accounts receivable is reduced by a an allowance for doubtful accounts that reflects management’s best estimate of the amounts that will not be collected. The Company includes any accounts receivable balances that are determined to be uncollectible, along with a general reserve, in its overall allowance for doubtful accounts. Management reviews accounts receivable on a monthly basis to determine if any receivables will be potentially uncollectible. Historical bad debts and current economic trends are used in evaluating the allowance for doubtful accounts. After all attempts to collect a receivable have failed, the receivable is written off against the allowance. Based on the information available, the Company believes an allowance for doubtful accounts of $50,000 as of December 31, 2019 and 2018 is adequate.

Inventory

Inventories are valued at the lower of cost or net realizable value using the first-in, first-out method. Inventory is comprised of raw materials that are purchased on the initial start date of a specific project and are capitalized using the percentage of completion method of accounting. We amortize these costs to the associated contract proportion with our percentage of completion on the contract, calculated using a cost-based input method. Capitalized costs are considered impaired when the net contract cost asset plus future costs to complete the contract are less than the remaining revenue to be recognized under the contract. When capitalized costs are impaired, we record a charge to the impairment, impairment charges cannot be reversed. As of December 31, 2019 and 2018 no impairment charges were recorded and management has determined that an excess and obsolete reserve is not required.

Property and Equipment

Property and equipment are recorded at cost. Depreciation of furniture and fixtures is provided using the straight-line method, generally over the terms of the lease. Repairs and maintenance expenditures, which do not extend the useful lives of the related assets, are expensed as incurred. Depreciation of machinery and equipment is based on the estimated useful lives of the assets.

An asset is disposed of or retired when no future economic benefits are expected to arise from continued use of the asset. The gain or loss arising on the disposal or retirement of an asset is determined as the difference between the sales proceeds and the carrying amount of the asset.

Revenue and Cost Recognition

On January 1, 2018, the Company adopted accounting standard ASC 606, Revenue from Contracts with Customers and all the related amendments using the modified retrospective method for all customer contracts not yet completed as of the adoption date. The adoption of ASC 606 did not have a significant impact on our Consolidated Financial Statements.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 1 - SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (continued)

Revenue and Cost Recognition (continued)

The Company recognizes revenue when the performance obligations in the client contract has been achieved. A performance obligation is a contractual promise to transfer a distinct service to the customer. The transaction price of a contract is allocated to each distinct performance obligation and recognized as revenue when or as, the customer receives the benefit of the performance obligation. Under ASC 606, revenue is recognized when a customer obtains control of promised services in an amount that reflects the consideration we expect to receive in exchange for those services. To achieve this core principal, the Company applies the following five steps:

A contract with a customer exists when (i) the Company enters into an enforceable contract with a customer that defines each party’s rights regarding the services to be transferred and identifies the payment terms related to these services, (ii) the contract has commercial substance and, (iii) the Company determines that collection of substantially all consideration for services that are transferred is probable based on the customer’s intent and ability to pay the promised consideration. The Company applies judgment in determining the customer’s ability and intention to pay, which is based on a variety of factors including the customer’s historical payment experience or, in the case of a new customer, published credit and financial information pertaining to the customer.

Performance obligations promised in a contract are identified based on the services that will be transferred to the customer that are both capable of being distinct, whereby the customer can benefit from the service either on its own or together with other resources that are readily available from third parties or from the Company, and are distinct in the context of the contract, whereby the transfer of the services is separately identifiable from other promises in the contract. To the extent a contract includes multiple promised services, the Company must apply judgment to determine whether promised services are capable of being distinct in the context of the contract. If these criteria are not met the promised services are accounted for as a combined performance obligation. The Company promises to design, manufacture and sell custom mirrors through contractual arrangements. It was determined that most services within a contract are substantially the same and have the same pattern of transfer to the customer over the term of the agreement and are therefore highly interdependent upon each other. As such, the Company determined that the services within a contract are not separately identifiable in the context of the contract and should therefore be bundled into a single performance obligation.

The transaction price is determined based on the consideration to which the Company will be entitled in exchange for transferring services to the customer. We evaluate whether a significant financing component exists when we recognize revenue in advance of customer payments that occur over time. We do not adjust the transaction price for the effects of financing if, at contract inception, the period between the transfer of control to a customer and final payment is expected to be one year or less. The Company establishes pricing for contracts with customers based on a fixed price for a fixed fee. Contracts do not provide for a discount or refund to customers and historically, no discounts or refunds have been given.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 1 - SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (continued)

Revenue and Cost Recognition (continued)

If the contract contains a single performance obligation, the entire transaction price is allocated to the single performance obligation. However, if a series of distinct services that are substantially the same qualifies as a single performance obligation in a contract with variable consideration, the Company must determine if the variable consideration is attributable to the entire contract or to a specific part of the contract. Contracts that contain multiple performance obligations require an allocation of the transaction price based on management’s judgment. The identified promises are considered to be bundled in arriving at the overall promise within the contract. This promise therefore results in one performance obligation, to design, manufacture and sell custom mirrors to our customer, therefore, allocation of the transaction price is not necessary.

Revenue is comprised of projects that are completed within our own facility or from a third-party vendor (direct sales). For projects that are completed within our own facility, the Company satisfies performance obligations at over time. For projects that are completed from a third-party vendor, the performance obligation is recognized at a point in time.

As of December 31, 2019 and 2018, total deferred revenue was $1,479,870 and $1,180,159. As of December 31, 2019, deferred revenue was comprised of work generated from our own Mount Vernon facility of $844,331, work performed at the third-party manufacturer of $598,510 and billings made upfront of $37,029. As of December 31, 2018, deferred revenue was comprised of work generated from our own Mount Vernon facility of $514,280, work performed at the third-party manufacturer of $206,337 and billings made upfront of $459,542. Deferred revenue balances at the beginning of the 2019 and 2018 reporting periods was recognized in full during the years ended December 31, 2019 and 2018, respectively. Each component of deferred revenue is further explained below.

For projects, that are completed within our own facility, we design, manufacture and sell custom mirrors for hotels and hospitals through contractual agreements. These sales require us to deliver our products within three to six months from commencement of order acceptance. We recognize revenue over time by using the input method based on costs incurred as it depicts our progress toward satisfaction of the performance obligation. Under this method, revenue arising from fixed price contracts is recognized as work is performed based on the ratio of costs incurred to date to the total estimated costs at completion of the performance obligations. Incurred costs include all direct material and labor costs and those indirect costs related to contract performance, such as indirect labor, supplies, tools, repairs and depreciation costs. Contract material costs are included in incurred costs when the project materials have been purchased or moved to work in process as required by the project’s engineering design. Cost based input methods of revenue recognition require us to make estimates of costs to complete the projects. In making such estimates, significant judgment is required to evaluate assumptions related to the costs to complete the projects, including materials, labor and other system costs. If the estimated total costs on any contract are greater than the net contract revenues, we recognize the entire estimated loss in the period the loss becomes known and can be reasonably estimated. Deferred Revenue represents amounts billed in excess of revenues and profits recognized. Total deferred revenue from the input method of accounting was $844,331 and $514,280 as of December 31, 2019 and 2018, respectively. Revenues and profits recognized in excess of amounts billed typically does not occur as we will not perform any work in excess of the amount we bill to our customers. On January 1, 2019, total deferred revenue from the input method of accounting was $204,880.

Each product or service delivered to a third-party customer that is manufactured by a third-party vendor is considered to satisfy a performance obligation. Performance obligations generally occur at a point in time and are satisfied when control of the goods passes to the customer. These sales are shipped from the manufacturer to the customer without our taking physical inventory possession. We report direct sales on a gross basis, that is, the amounts billed to our customers are recorded as “Sales,” and inventory purchased from manufacturers are recorded as Cost of Sales. We are the principal of direct sales because we control the inventory before it is transferred to our customers. Our control is evidenced by us being primarily responsible for fulfilling the promise to our customers, taking on inventory risk of returned product, and having discretion in establishing pricing. We typically pay our vendors a portion of the total cost up front and the remaining balance is accrued for and paid within 30 to 60 days of when the products are shipped from the third-party warehouse. Vendor payments are capitalized until completion of the project and are recorded as vendor deposits. As of December 31, 2019 and 2018, the vendor deposit balance was $104,517 and $95,556, respectively.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 1 - SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (continued)

Revenue and Cost Recognition (continued)

Losses expected to be incurred on contracts in progress are charged to operations in the period such losses are determined. Deferred revenue from these projects as of December 31, 2019 and 2018 was $598,510 and $206,337, respectively. On January 1, 2019, total deferred revenue from these projects were $255,875. At December 31, 2019 and 2018, there were no losses charged to expense.

There are times that we bill upfront where no work is performed until 30 to 60 days after the deposit is received from our customer. Accordingly, no revenue is recognized and the amounts are deferred. As of December 31, 2019 and 2018, deferred revenue balances related to these invoices were $37,029 and $459,542, respectively. On January 1, 2019, total deferred revenue related to these billings were $291,372.

For the year ended December 31, 2019, the Company generated revenues of $6,394,222 at a point in time and $2,700,928 over time.

For the year ended December 31, 2018, the Company generated revenues of $5,815,970 at a point in time and $1,740,474 over time.

Shipping and Handling Charges

The Company reports shipping and handling fees charged to customers as part of net sales and the associated expense as part of cost of sales. Shipping charges amounted to $1,664,950 and $938,111 for the years ended December 31, 2019 and 2018, respectively.

Advertising

Advertising costs are charged to operations when incurred. Advertising expense for the years ended December 31, 2019 and 2018 was $218,724 and $265,637, respectively.

Research and Development

The Company accounts for research and development costs in accordance with Accounting Standards Codification subtopic 730-10, Research and Development (“ASC 730-10”). Under ASC 730-10, all research and development costs must be charged to expense as incurred. Accordingly, internal research and development costs are expensed as incurred. The Company did not incur any research and development expenses during the years ended December 31, 2019 and 2018.

Income Taxes

The Company files income tax returns using the accrual basis of accounting. Income taxes are accounted for under the asset and liability method. Current income taxes are based on the year’s income taxable for federal and state tax reporting purposes. Deferred income tax assets and liabilities are computed annually for differences between the financial statement and tax bases of assets and liabilities that will result in taxable or deductible amounts in the future based on enacted tax laws and rates applicable to the periods in which the differences are expected to affect taxable income. The carrying amount of deferred tax assets is reviewed at each reporting date and reduced to the extend that it is no longer probable that sufficient taxable income will be available to allow all or part of the asset to be recovered.

Per FASB ASC 740-10, disclosure is not required of an uncertain tax position unless it is considered probable that a claim will be asserted and there is a more-likely-than-not possibility that the outcome will be unfavorable. Using this guidance, as of December 31, 2019 and 2018, the Company has no uncertain tax positions that qualify for either recognition or disclosure in the financial statements. The Company’s 2018, 2017 and 2016 Federal and State tax returns remain subject to examination by their respective taxing authorities. Neither of the Company’s Federal or State tax returns are currently under examination.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 1 - SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (continued)

Fair Value of Financial Instruments

The Company records the fair value of assets and liabilities in accordance with Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 820, Fair Value Measurement. FASB ASC 820 establishes a framework for measuring fair value under accounting principles generally accepted in the United States. That framework provides a fair value hierarchy that prioritizes the inputs to valuation techniques used to measure fair value.

The three levels of the fair value hierarchy under FASB ASC 820 are as follows:

The carrying amounts reported in the consolidated balance sheets as of December 31, 2019 and 2018 for cash and cash equivalents, accounts receivable, prepaid expenses and other current assets, accounts payable and accrued expenses approximate fair value due to the immediate or short-term maturity of these financial instruments. The fair value of capital lease obligations approximate their carrying value because these financial instruments bear interest at rates that approximate current market rates for loans with similar maturities and credit quality.

Stock- Based Compensation

The Company accounts for its stock-based compensation awards in accordance with Financial Accounting Standards Board (“FASB”) Accounting Standards Codification Topic 718 (“ASC”), Compensation-Stock Compensation (“ASC 718"). ASC 718 requires all stock-based payments to employees, including grants of employee stock options and restricted stock and modifications to existing stock options, to be recognized in the statements of operations based on their fair values.

Patent Costs

We capitalize costs consisting principally of outside legal costs and filing fees related to obtaining patents. We amortize patent costs over the useful life of the patent, beginning with the date the U.S. Patent and Trademark Office, or foreign equivalent, issues the patent. As of December 31, 2019 and 2018, we capitalized $60,092 and $0 of patent costs. As of December 31, 2019 and 2018, we have not recorded any amortization expense for these patents.

Warranty Costs

The Company typically provides warranty on its products. The Company accrues for the estimated warranty costs at the time when revenue is recognized. The warranty accruals are regularly monitored by management based upon historical experience and any specifically identified failures. While the Company engages in extensive product quality assessment, actual product failure rates, material usage or service delivery costs could differ from estimates and revisions to the estimated warranty liability would be required. There was no warranty accrual as of December 31, 2019 and 2018, respectively.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 1 - SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (continued)

Subsequent Events Evaluation Date

The Company evaluated the events and transactions subsequent to the December 31, 2019 balance sheet date, in accordance with ASC 855-10-50, "Subsequent Events", through June 23, 2020, which is the date the consolidated financial statements were available to be issued.

Recent Accounting Pronouncements

Recently Adopted

In February 2016, the Financial Accounting Standards Board, or the FASB, issued ASU No. 2016-02, Leases (Topic 842), which requires lessees to recognize right-of-use, or ROU, assets and related lease liabilities on the balance sheet for all leases greater than one year in duration. We adopted ASC 842 on January 1, 2019 using a modified retrospective transition approach for leases existing at, or entered into after, the beginning of the earliest comparative period presented in the financial statements. The modified retrospective approach did not require any transition accounting for leases that expired before the earliest comparative period presented. The adoption of this standard resulted in the recording of ROU assets and lease liabilities for all our lease agreements with original terms of greater than one year. The adoption of ASC 842 did not have a significant impact on our statements of income or cash flows.

In June 2018, the FASB issued ASU 2018-07, Compensation-Stock Compensation (Topic 718): Improvements to Nonemployee Share-Based Payment Accounting, which simplifies the accounting for nonemployee share-based payment transactions by expanding the scope of ASC Topic 718, Compensation — Stock Compensation, to include share-based payment transactions for acquiring goods and services from nonemployees. Under the new standard, most of the guidance on stock compensation payments to nonemployees would be aligned with the requirements for share-based payments granted to employees. This standard became effective for our company on January 1, 2019. The adoption of this standard did not have a material impact on our financial statements.

Not Yet Adopted

In August 2018, the FASB issued ASU 2018-13, Fair Value Measurement (Topic 820): Disclosure Framework — Changes to the Disclosure Requirements for Fair Value Measurement, which removes, modifies and adds various disclosure requirements related to fair value disclosures. Disclosures related to transfers between fair value hierarchy levels will be removed and further detail around changes in unrealized gains and losses for the period and unobservable inputs used in determining level 3 fair value measurements will be added, among other changes. ASU 2018-13 is effective for interim and annual reporting periods beginning after December 15, 2019, and early adoption is permitted. We will modify our disclosures beginning in the first quarter of 2020 to conform to this guidance. We do not expect the adoption of this standard and the associated changes to our disclosures to have a material impact to our financial statements.

In June 2016, the FASB issued ASU 2016-13, Financial Instruments — Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instruments, which replaces the current incurred loss impairment methodology for financial assets with a methodology that reflects expected credit losses. The new credit losses model must be applied to loans, accounts receivable, and other financial assets. ASU 2016-13 is effective for annual periods beginning after December 15, 2019, including interim periods within those annual periods. We plan to adopt the new standard in the first quarter of 2020 using a modified retrospective approach with a cumulative-effect adjustment to retained earnings as of the beginning of the year of adoption. We do not believe this guidance will have a material impact on our statements of operations or cash flows.

We currently believe that all other issued and not yet effective accounting standards are not relevant to our financial statements.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 2 - INVENTORY

Inventory consists of raw materials of $99,543 and $112,113 at December 31, 2019 and 2018, respectively.

NOTE 3 - PROPERTY AND EQUIPMENT

Property and equipment are summarized by major classifications as follows:

Depreciation expense, including amortization of assets under capital leases, for the years ended December 31, 2019 and 2018 was $8,121 and $6,250, respectively.

NOTE 4 - DUE TO AND FROM SHAREHOLDER

As of December 31, 2019 and 2018 the Company loaned its majority shareholder noninterest-bearing advances, which are due upon demand. As of December 31, 2019 and 2018, amounts owed from the Company's majority shareholder was $4,225 and $103,721, respectively.

NOTE 5 - CAPITAL LEASE OBLIGATION

The Company's machinery under a capital lease, which is included in machinery and equipment is summarized as follows:

Future minimum principal and interest payments under the capital lease agreements as of December 31, 2019, are as follows:

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 6 - LOANS PAYABLE

In December of 2012, the Company received $260,000 from Seagrace Partners that accrued interest at 5% annually with no maturity date and no stated terms of repayment. As of December 31, 2019 and 2018, the note had an outstanding principal balance of $0 and $131,336, respectively. Interest expense related to this note for the year ended December 31, 2019 and 2018 was $5,902 and $7,656, respectively. The outstanding principal balance of $132,390 was reclassed to liabilities subject to compromise (note payable- pre-petition). In 2019, the Company entered into a settlement agreement in relation to the Company's Chapter 11 Bankruptcy (as further described in Note 10 of the financial statements) with the note holder where the Company would pay $80,000 over the next 90 days, in four equal installments of $20,000. The entire $80,000 was repaid prior to December 31, 2019. In addition, the Company will provide the third party lender 8,000 shares of common stock in the Company (subject to certain transfer restrictions), in an amount which will have a public trading value within 24 months of at least $85,000. If the value of the stock does not reach $85,000 at the end of 24 months, the shareholders of the Company will provide the third party lender make-up stock to reach the value of $85,000 with a maximum amount of shares to be issued of 17,000 shares. This repayment would constitute as full and final payment of any and all obligations to the lender. On the date of the settlement, the Company recorded a loss on extinguishments in the amount of $34,610.

In June of 2018 and June of 2016, the Company received advances from On Deck Capital in the amounts of $150,000 and $100,000, respectively. The June 2016 note matured in one year from the date of issuance and required 52 weekly payments of $2,346. As of December 31, 2019 and 2018, the balance of this note was $0 and interest expense of $3,981 was recorded during the year ended December 31, 2018. The June 2018 note matured in one year from the date of issuance and required 52 weekly payments of $3,605. As of December 31, 2018, the company made no repayments on this note and has an outstanding principal balance of $150,000. As part of the Chapter 11 Bankruptcy, the outstanding principal balance of $150,000 was reclassed to liabilities subject to compromise (note payable- pre-petition) as further described in Note 10 of the financial statements. Accrued interest on this note as of December 31, 2018 was $17,360 and an additional $20,140 was accrued for based on the proof of claim submitted by the note holder. These amounts were also reclassed to liabilities subject to compromise (accounts payable and accrued expenses- pre-petition) as further described in Note 10 of the financial statements. In 2019, the Company paid $18,750, which was 10% of the allowed proof of claim in the Chapter 11 Bankruptcy of $187,500. In addition, the Company was required to pay $157,500 in a five payments in the amount of $30,000 per year, with an additional $7,500 in year two. The Company recognized a gain on extinguishments of $11,250 in relation to the settlement in the year ended December 31, 2019. As of December 31, 2019, the company has an outstanding balance of $157,500.

Minimum obligations under this loan agreement is as follows:

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 6 - LOANS PAYABLE (continued)

In October of 2017, June of 2017, and September of 2016, the Company received advances from LG Funding, LLC in the amounts of $150,971, $150,990, and $125,990, respectively, in exchange for notes in the amounts of $182,679, $187,228, and $156,228, respectively. On the initial date of the note, the Company accounted for the notes at face value less a discount for the difference between the face value and advances received. The discounts were amortized to interest expense in proportion to the repayments over the total amount loaned. For the years ended December 31, 2019 and 2018, the Company recorded $0 and $48,837 in interest expense in relation to these notes. As of December 31, 2019 and 2018, the loans from this third party consisted of the following:

The Company recognized a gain of $81,000 in 2019 as a result of the Chapter 11 Bankruptcy Case and all remaining outstanding balances were settled in full.

NOTE 7 - STOCKHOLDERS' EQUITY

Series A Preferred Stock

Liquidation Preference

In the event of any voluntary or involuntary liquidation, dissolution or winding up of the Corporation, holders of shares of Series A Preferred Stock shall not be entitled to any liquidation preference.

Voting

On any matters presented to the stockholders of the corporation for their action or consideration at any meeting of stockholders of the Corporation (or by written consent of stockholders in lieu of meeting), each holder of outstanding shares of Series A Preferred Stock shall be entitled to vote in an amount equal to 1,000 votes per share. Series A Preferred Stock shall vote as a single class and such voting rights shall be identical in all respects.

Conversion

The holders of the shares of Series A Preferred Stock shall not have any rights hereunder to convert such shares into, or exchange such shares for, shares of any other series or class of capital stock of the Corporation or of any other person.

Common stock

The holders of our common stock are entitled to the following rights:

Voting

Each share of our common stock entitles its holder to one vote per share on all matters to be voted or consented upon by the stockholders. Holders of our common stock are not entitled to cumulative voting rights with respect to the election of directors.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 7 - STOCKHOLDERS' EQUITY (continued)

Common stock (continued)

Dividend

Subject to limitations under Delaware law and preferences that may apply to any shares of preferred stock that we may decide to issue in the future, holders of our common stock are entitled to receive ratably such dividends or other distributions, if any, as may be declared by our Board out of funds legally available.

Liquidation

In the event of the liquidation, dissolution, or winding up of our business, the holders of our common stock are entitled to share ratably in the assets available for distribution after the payment of all of our debts and other liabilities, subject to the prior rights of the holders of our preferred stock.

Other Matters

The holders of our common stock have no subscription, redemption, or conversion privileges. Our common stock does not entitle its holders to preemptive rights. All of the outstanding shares of our common stock are fully paid and non-assessable. The rights, preferences and privileges of the holders of our common stock are subject to the rights of the holders of shares of any series of preferred stock which we may issue in the future.

NOTE 8 - RELATED PARTY

In February of 2019, the Company engaged Carmel, Milazzo & Feil LLP (the "Firm") to represent and assist the company with all general corporate legal matters including the preparation and filing with the Securities and Exchange Commission of a registration statement on Form S-1 through the Company's intended initial public offering. Ross Carmel, a former board member of Applied UV, is a partner at the firm. The firm will perform services in exchange for three percent of the outstanding shares of the Company's common stock, issued as follows: 1.) One percent due upon execution of the agreement 2.) One percent due up the filing of the Form S-1; and 3.) One percent due upon the SEC declaring the Form S-1 effective. As of December 31, 2019, the company was liable to issue 102,067 shares of common stock to the firm. These shares have not been issued to date and have been recorded as a liability to be settled in stock for an amount of $507,805. Because these legal fees are directly related to the initial public offering, the amount has been capitalized and is included in other assets.

NOTE 9 - LEASING ARRANGEMENTS

The Company adopted ASU 2016-02 prospectively as of January 1, 2019, the date of initial application, and therefore prior comparative periods were not adjusted. As part of the adoption, the Company elected the “package of expedients”, which permits the Company not to reassess under the new standard the Company’s prior conclusions about lease identification and initial direct costs. The Company did not elect the use-of hindsight or the practical expedient pertaining to land easements, the latter not being applicable to the Company. The Company has lease arrangements which are classified as short-term in nature. The Company has elected the short-term lease recognition exemption for all leases that qualify. This means, for those leases that qualify, the Company will not recognize Right of Use ("ROU") assets or lease liabilities.

The Company determines whether an arrangement is a lease at inception. The Company has operating leases for office space and office equipment. The Company’s leases have remaining lease terms of one year to seven years, some of which include options to extend the lease term for up to five years. The Company considered these options to extend in determining the lease term used to establish the Company’s right-of use assets and lease liabilities once reasonably certain of exercise. The Company’s lease agreements do not contain any material residual value guarantees or material restrictive covenants.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 9 - LEASING ARRANGEMENTS (continued)

ROU assets represent the Company’s right to use an underlying asset for the lease term and lease liabilities represent the Company’s obligation to make lease payments arising from the lease. Operating lease ROU assets and operating lease liabilities are recognized at the lease commencement date based on the present value of the future lease payments over the lease term. The operating lease ROU asset also includes any lease payments made in advance of lease commencement and excludes lease incentives. The lease terms used in the calculations of the operating ROU assets and operating lease liabilities include options to extend or terminate the lease when the Company is reasonably certain that it will exercise those options. Lease expense for lease payments is recognized on a straight-line basis over the lease term.

As the Company’s leases do not provide an implicit rate, the Company uses an incremental borrowing rate of 5% based on the information available at commencement date in determining the present value of lease payments. On the date of adoption the company recorded a ROU asset and a corresponding lease liability in the amount of $710,075.

On February 7, 2014, the Company entered into a lease agreement in Mount Vernon, New York on a month to month basis. The monthly rent under this arrangement from January 1, 2018 through November 30, 2018 was $10,000 per month, from December 2018 through February 2019 was $11,150 per month. The Company then amended the lease for a term that commenced on April 1, 2019 and expire on the 31st day of March 2024 at a monthly rate of $13,400. Rent expense for the year ended December 31, 2019 and 2018 was $156,300 and $121,150, respectively. The lease can be cancelled by either party with 150 days of written notice.

Schedule maturities of operating lease liabilities outstanding as of December 31, 2019 are as follows:

Consistent with ASC 842-20-50-4, the Company calculated its total lease cost based solely on its monthly rent obligation. The Company had no cash flows arising from its lease, no finance lease cost, short term lease cost, or variable lease costs. Our lease does not produce any sublease income, or any net gain or loss recognized from sale and leaseback transactions. As a result, the Company did not need to segregate amounts between finance and operating leases for cash paid for amounts included in the measurement of lease liabilities, segregated between operating and financing cash flows; supplemental non-cash information on lease liabilities arising from obtaining right-of-use assets; weighted-average calculations for the remaining lease term; or the weighted-average discount rate.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 10 - COSTS AND ESTIMATED EARNINGS ON CONTRACTS IN PROGRESS

Costs and estimated earnings on contracts in progress, net of progress billings, are as follows as of December 31, 2019 and 2018:

Contract assets represent amounts earned under contracts in progress but not yet billed under the terms of those contracts. These amounts become billable according to the contract terms, which usually consider passage of time, achievement of certain milestones or completion of the project. Substantially all costs and estimated earnings in excess of billings on contracts in progress are expected to be billed and collected in the following year.

Contract liabilities represent billings to customers in excess of costs and earnings on contracts in progress. Substantially all such amounts are expected to be earned in the following year.

NOTE 11 - SHARE EXCHANGE

On March 26, 2019, March 27, 2019 and July 31, 2019, we and the shareholder of SteriLumen, Inc. and the sole member of Munn Works, LLC, completed the transactions contemplated by three Share Exchange Agreements. Pursuant to the applicable Share Exchange Agreements, SteriLumen, Inc. and Munn Works, LLC transferred to us all assets and liabilities. The shareholders of SteriLumen, Inc. exchanged all of their shares in SteriLumen for 2,000 preferred and 2,001,252 common shares of Applied UV, Inc. The sole member of Munn Works, LLC exchanged all of its membership interest in Munn Works, LLC for 3,000,000 common shares of Applied UV, Inc. As the Share Exchanges were transactions between entities that are under common control, accounting rules require that our Consolidated Financial Statements include the results of the Transferred Businesses for all periods presented, including periods prior to the completion of the Share Exchanges.

NOTE 12 - LEGAL

APF Management filed and served a complaint in 2013 New York state court against Munn Works, LLC, Max Munn and various other parties seeking recovery of damages and was awarded various damages on behalf of APF.

On June 25, 2018, Munn Works, LLC. entered Chapter 11 bankruptcy in order to facilitate an appeal and a resolution to this matter. As part of the Chapter 11 bankruptcy, APF management filed a claim in the amount of $1,474,505. All of the parties agreed to resolve the disputes whereby, APF would receive $400,000 payable by the Company. The amount was settled and paid in full in 2019.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 12 - LEGAL (continued)

Administration of Chapter 11 Case

In June of 2018, Munn Works, LLC received Bankruptcy court approval of certain "first-day" motions, which preserved the Company's ability to continue operations without interruption in Chapter 11. As part of the "first-day" motions, the Company received approval to pay or otherwise honor certain pre-petition obligations generally designed to support the Company's operations. Additionally, the Bankruptcy Court confirmed the Company's authority to pay for goods and services received post-petition in the ordinary course of business.

As part of the chapter 11 case, the Company has retained, pursuant to Bankruptcy Court authorization, legal and other professionals to advise the Company in connection with the administration of its chapter 11 case and its litigation with APF management, and certain other professionals to provide services and advice in the ordinary course business. As a result of the chapter 11 filing, the payment of pre-petition liabilities is generally subject to compromise pursuant to a plan of reorganization. Generally, under the Bankruptcy Code, actions to enforce or otherwise effect payment of pre-bankruptcy filing liabilities are stayed. Although payment of pre-petition claims generally is not permitted, the Bankruptcy Court granted the Company authority to pay certain pre-petition claims in designated categories and subject to certain terms and conditions. Among other things, the Bankruptcy Court has authorized the Company to pay certain pre-petition claims relating to employees and critical vendors.

On June 25, 2018. the Company filed schedules of assets and liabilities and statement of financial affairs (the "Schedules") with the Bankruptcy Court. The Bankruptcy Court has entered an order setting October 26, 2018 as the deadline for filing proofs of claim (the "Bar Date"). The Bar Date is the date by which claims against the Company relating to the period prior to the commencement of the Company's chapter 11 case must be filed if such claims are not listed in liquidated, non-contingent and undisputed amounts in the Schedules, or if the claimant disagrees with the amount, characterization or classification of its claim as reflected in the Schedules. Claims that are subject to the Bar Date and which are not filed on or prior to the Bar Date, may be barred from participating in any distribution that may be made under a plan of reorganization in the Company's chapter 11 case.

The Company applied Financial Accounting Standards Board ("FASB") Accounting Standards Codification ("ASC") 852, Reorganizations, which is applicable to companies under bankruptcy protection, and requires amendments to the presentation of key financial statement line items. It requires that the financial statements for periods subsequent to the chapter 11 filing distinguish transactions and events that are directly associated with the reorganization from the ongoing operations of the business. Revenues, expenses, realized gains and losses, and provisions for losses that can be directly associated with the reorganization and restructuring of the business must be reported separately as reorganization items in the consolidated statements of operations. The balance sheet must distinguish pre-petition liabilities subject to compromise from both those pre-petition liabilities that are not subject to compromise and from post-petition liabilities. Liabilities that may be subject to a plan of reorganization must be reported at the amounts expected to be allowed in the Company's chapter 11 case, even if they may be settled for lesser amounts as a result of the plan of reorganization or negotiations with creditors. In addition, cash used by reorganization items are disclosed separately in the consolidated statements of cash flow.

Liabilities Subject to Compromise

Pre-petition liabilities that are subject to compromise are required to be reported at the amounts expected to be allowed in the Company's chapter 11 case, even if they may be settled for lesser amounts. The amounts classified as Liabilities Subject to Compromise as of December 31, 2018 may be subject to future adjustments depending on Bankruptcy Court actions, further developments with respect to disputed claims, determinations of the secured status of certain claims, if any, the value of any collateral securing such claims, or other events. The Company cannot reasonably estimate the value of the claims that will ultimately be allowed in its chapter 11 case until its evaluation, investigation and reconciliation of all filed claims has been completed.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 12 - LEGAL (continued)

Liabilities Subject to Compromise (Continued)

The amount of liabilities subject to compromise represents the Company's estimate, where an estimate is determinable, of known or potential pre-petition claims to be addressed in connection with its chapter 11 case. Such liabilities are reported at the Company's current estimate, where an estimate is determinable, of the allowed claim amount, even though they may be settled for lesser amounts. These claims remain subject to future adjustments depending on Bankruptcy Court actions, further developments with respect to disputed claims, determinations of the secured status of certain claims, if any, the value of any collateral securing such claims, or other events.

As of December 31, 2018, Liabilities subject to Compromise consist of the following (note: all liabilities were settled in 2019, therefore no balances remain as of December 31, 2019):

Pursuant to Bankruptcy Court Order dated May 31, 2019, the Debtor’s Second Amended Chapter 11 Plan dated April 29, 2019 (the “Plan”) was approved and confirmed. The Plan provided treatment for five (5) classes of claims, with the general unsecured claims composing Class 4 Claimants. Under the Plan, Class 4 Claimants, would receive 10% of their Allowed Claim on the Effective Date. As a result of the bankruptcy claim, APF received and settled for $400,000 where a gain on settlement of $1,074,505 was recorded. As described in Note 6 of the financial statements, the Company recorded a total net gain from settlement of debt and gains from its Chapter 11 Bankruptcy case in the amount of $57,640. Other various pre-petition creditors received and settled for a total of $103,761, resulting in a gain on settlement in the amount of $388,253. The entire amount was escrowed on or before May 23, 2019 and paid within 15 days of the effective date of the stipulation. As a result of the transaction, the Company recorded a total gain on settlement of $1,520,398.

NOTE 13 - INCOME TAXES

The provision for federal and state income taxes for the years ended is as follows:

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 13 - INCOME TAXES (continued)

The income tax provision differs from the expense that would result from applying federal statutory rates to income before income taxes because the Company is subject to state income taxes, deferred income taxes are based on average tax rates and a portion of gifts and meals and entertainment are not tax deductible. A valuation allowance has been provided to reduce deferred tax assets to an amount that is more likely than not to be realized.

On December 22, 2017, the U.S. federal government enacted comprehensive tax legislation commonly referred to as the Tax Cuts and Jobs Act, or the Tax Act. The Tax Act makes broad and complex changes to the U.S. federal tax code, including, but not limited to reducing the U.S. federal corporate tax rate from 35 percent to 21 percent, effective January 1, 2018.

Prior to the share exchange, Munn Works, LLC was taxed as a single member Limited Liability Company for federal and state income tax purposes. As such, the Company will not pay income taxes for earnings prior to the share exchange, as any income or loss will be included in the tax returns of the individual member. Accordingly, no provision is made for income taxes in the financial statements prior to the share exchange.

Effective tax rates differ from the federal statutory rate of 21% applied to income before provision for income taxes due to the following:

NOTE 14 - SEGMENT REPORTING

FASB Codification Topic 280, Segment Reporting, establishes standards for reporting financial and descriptive information about an enterprise’s reportable segments. The Company has two reportable segments: the design, manufacture, assembly and distribution of automated disinfecting systems for use in public spaces, hospitals and other healthcare facilities (disinfectant segment) and the manufacture of fine mirrors specifically for the hospitality industry (hospitality segment). The segments are determined based on several factors, including the nature of products and services, the nature of production processes, customer base, delivery channels and similar economic characteristics.

An operating segment’s performance is evaluated based on its pre-tax operating contribution, or segment income. Segment income is defined as net sales less cost of sales, and segment selling, general and administrative expenses, and does not include amortization of intangibles, stock-based compensation, other charges (income), net and interest and other, net.

All net sales, cost of goods sold, and other income (expense) was generated or incurred from the hospitality segment of our business. For the years ended December 31, 2019 and 2018, the hospitality segment of our business incurred $1,860,422 and $1,857,240, respectively, of selling, general and administrative expenses. For the years ended December 31, 2019 and 2018, the disinfectant mirror segment of our business incurred $55,963 and $55,861, respectively, of selling, general and administrative expenses.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 14 - SEGMENT REPORTING (continued)

As of December 31, 2019 and 2018, total assets from the hospitality segment of our business amounted to $4,706,535 and $3,090,548, respectively. As of December 31, 2019 and 2018, total assets from the disinfectant mirror segment of our business amounted to $62,852 and $21,434, respectively.

As of December 31, 2019 and 2018, total liabilities from the hospitality segment of our business amounted to $3,581,690 and $4,471,181, respectively. As of December 31, 2019 and 2018, total liabilities from the disinfectant mirror segment of our business amounted to $37,477 and $57,417, respectively.

NOTE 15 - SUBSEQUENT EVENT

Management has evaluated subsequent events through June 23, 2020, the date the financial statements were available to be issued. As a result of the spread of the COVID-19 Coronavirus and the resulting stay-at-home orders issued by the state and local municipalities in which the Company operates, the Company is experiencing reduced sales. The duration of the reduction in sales may be only temporary. However, the related financial impact and duration cannot be reasonably estimated at this time. On April 3, 2020, the Company submitted a Paycheck Protection Program application to Chase Bank for a loan amount equal to $296,287. The amount was approved and the Company has received the funds. The amount will be used to cover payroll costs, rent, and utilities. Employee and compensation levels are expected to be maintained, however, it is not certain at this time whether or not the loan will be forgiven.

On April 20, 2020, SteriLumen entered into the Mount Sinai Agreement pursuant to which Mount Sinai has agreed to conduct a study of the effectiveness of the SteriLumen Disinfecting System in 17 patient bathrooms at Mount Sinai St. Luke’s Hospital in New York, NY. SteriLumen will be responsible for funding the direct and indirect costs of Mount Sinai’s research in the amount of $160,000 plus all of the cost of microbiological testing. To the extent any intellectual property resulting from the research is conceived by Mount Sinai it will be the intellectual property of Mount Sinai and to the extent it is conceived by SteriLumen it will be the intellectual property of SteriLumen. SteriLumen has a 60-day exclusive option to negotiate a license for Mount Sinai’s resulting patent rights if such patent was obtained at SteriLumen’s request and SteriLumen has paid for all the costs in obtaining the patent. If the results of the study contained in Mount Sinai’s final report are used by SteriLumen in a successful regulatory filing or a successful fundraising effort, the Sponsor will be obligated to pay Mount Sinai a fee of $30,000.

Max Munn, Chief Executive Officer of the Company is entitled to a five-year warrant to purchase 80,000 shares of the Company’s common stock at an exercise price equal to the greater of $5.00 per share and the per share market value of the Company's common stock at the date of the grant in lieu of cash salary. The issuance of the warrants is contingent upon an initial public offering.

In May of 2020, we adopted the Applied UV, Inc. 2020 Omnibus Incentive Plan (the “Plan”), which is effective as of March 31, 2020. Under the Plan, the Company may grant nonqualified stock options, incentive stock options, stock appreciation rights, restricted stock, restricted stock units, performance shares, performance units, and other awards. Awards of up to 600,000 shares of common stock to Company employees, officers, directors, consultants and advisors are available under the Plan. The type of grant, vesting provisions, exercise price and expiration dates are to be established by the Board at the date of grant.

Applied UV, Inc. and Subsidiaries

Notes to Consolidated Financial Statements

December 31, 2019 (As Restated) and 2018

NOTE 15 - SUBSEQUENT EVENT (continued)

On February 18, 2020 the Board approved the grant to each member of the Board, on a quarterly basis, of options to purchase 500 shares of the Company’s common stock at an exercise price of equal to the greater of $2.50 per share and the per share market value of the Company's common stock on the date of the grant. On April 1, 2020, we issued options to purchase 2,000 shares of Company common stock to the Board, of which 1,250 have been cancelled. The options are subject to equal quarterly vesting over a one-year period.

In June of 2020, we effected a 5:1 reverse stock split (the “Reverse Stock Split”) by filing an amendment to the Company’s Amended and Restated Certificate Incorporation with the Delaware Secretary of State. The Reverse Stock Split combined every five shares of Common Stock issued and outstanding immediately prior to effecting the Reverse Stock Split into one share of Common Stock. As a result, the number of issued and outstanding shares of Common Stock was retroactively adjusted in the consolidated financial statements.

NOTE 16 – RESTATEMENT

The Company has restated herein its audited consolidated financial statements for the year ended December 31, 2019. While preparing its annual report for the year ended December 31, 2020 the Company identified an error in the timing of recognizing certain revenues. We erroneously recognized revenues in the amount of $234,570 in the fourth quarter of 2019. For the year ended and as of December 31, 2019, revenue was overstated by $234,570 and deferred revenue was understated by $234,570, respectively. The tables below summarize the impact of the restatements described above on financial information previously reported on the Company’s Forms S-1 for the year ended December 31, 2019. Certain line items in the financial data below were excluded because they were not impacted by the Restatement.

These errors had a non-cash impact to cash flows from operations, as such, the statement of cash flows for the year ended December 31, 2019 reflects an adjustment to net income and a corresponding adjustment for the change in deferred revenue.

Applied UV, Inc. and Subsidiaries

Consolidated Financial Statements

December 31, 2020 and 2019 (Restated)

Applied UV, Inc. and Subsidiaries

Index to the Consolidated Financial Statements

December 31, 2020 and 2019 (Restated)