ASENSUS SURGICAL, INC. - Annual Report: 2011 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2011

OR

For the transition period from             to             

Commission File Number 0-19437

SAFESTITCH MEDICAL, INC.

(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code: (305) 575-4600

Securities registered pursuant to Section 12(b) of the Exchange Act: None

Securities registered pursuant to Section 12(g) of the Exchange Act:

Common Stock, $0.001 par value per share

(Title of Class)

Indicate by check mark whether the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  ¨

Indicate by check mark whether the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act.  ¨

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the past 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to the filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data file required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act)    Yes  ¨    No  x

The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the average bid and asked price of such common equity, as of June 30, 2011, was: $7.8 million

As of March 28, 2012 there were 48,797,755 shares of Common Stock, $0.001 par value per share, outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Part III of this Annual Report on Form 10-K is incorporated by reference to our Definitive Proxy Statement on Schedule 14A to be filed in respect of our 2012 Annual Meeting of Stockholders.

Table of Contents

SAFESTITCH MEDICAL, INC.

TABLE OF CONTENTS FOR FORM 10-K

2

Table of Contents

CAUTIONARY STATEMENT REGARDING FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K contains certain forward-looking statements about our expectations, beliefs or intentions regarding, among other things, our product development and commercialization efforts, business, financial condition, results of operations, strategies or prospects. You can identify forward-looking statements by the fact that these statements do not relate strictly to historical or current matters. Rather, forward-looking statements relate to anticipated or expected events, activities, trends or results as of the date they are made. Because forward-looking statements relate to matters that have not yet occurred, these statements are inherently subject to risks and uncertainties that could cause our actual results to differ materially from any future results expressed or implied by the forward-looking statements. Many factors could cause our actual activities or results to differ materially from the activities and results anticipated in forward-looking statements. These factors include those set forth below as well as those contained in “Item 1A—Risk Factors” of this Annual Report on Form 10-K and our other filings with the Securities and Exchange Commission (“SEC”). We do not undertake any obligation to update forward-looking statements, except as required by applicable law. These forward-looking statements are only predictions and reflect our views as of the date they are made with respect to future events and financial performance.

Risks and uncertainties, the occurrence of which could adversely affect our business, include the following:

3

Table of Contents

4

Table of Contents

* * * * *

5

Table of Contents

PART I

Unless the context otherwise requires, all references in this Annual Report on Form 10-K to the “Company”, “SafeStitch”, “we”, “our”, “ours”, and “us” refer to SafeStitch Medical, Inc., a Delaware corporation (formerly Cellular Technical Services Company, Inc.), including our wholly-owned subsidiaries, SafeStitch LLC, a Virginia limited liability company, and Isis Tele-Communications, Inc., a Delaware corporation with no operating business.

More information about us may be found at our website: www.SafeStitch.com. Information contained on our website is not incorporated by reference and does not comprise a part of this Annual Report on Form 10-K. Please refer to page 19 for a glossary of certain medical terms used in this Annual Report on Form 10-K.

General

We were originally incorporated in August 1988 as NCS Ventures Corp. under the laws of the State of Delaware, after which our name changed to Cellular Technical Services Company, Inc. On September 4, 2007, we acquired SafeStitch LLC, and, in January 2008, we changed our name to SafeStitch Medical, Inc.

Company Overview

We are a developmental stage FDA-registered medical device company focused on the development of medical devices that manipulate tissues for the treatment of hernia formation, obesity, gastroesophageal reflux disease (“GERD”), esophageal obstructions, Barrett’s Esophagus, upper gastrointestinal bleeding, and other intraperitoneal abnormalities through endoscopic and minimally invasive surgery.

We have utilized our expertise in intraperitoneal surgery to test certain of our devices in in vivo and ex vivo animal trials and ex vivo human trials, and with certain products, in limited in vivo human trials. Certain of our products did not or may not require clinical trials, including our AMID Stapler^®, SMART Dilator^TM, and standard and airway bite blocks. Where required, we intend to rapidly, efficiently and safely move into clinical trials for certain other devices, including those utilized in surgery for the treatment of obesity, GERD and for the treatment and diagnosis of Barrett’s Esophagus. Preliminary clinical trials for our gastroplasty product candidates began in the third quarter of 2010 and are expected to continue in the second half of 2012. In February 2012, we received Special 510K clearance for the AMID Stapler^®, and, on March 28, 2012 we introduced the AMID Stapler^® to the participants attending the joint meeting of the 2012 American Hernia Society and the European Hernia Society in New York.

Our objective in designing surgical devices is to accomplish one or more of the following surgical goals:

We believe that we can attain these goals by developing devices that, among other things, allow the endoscopic performance of certain types of surgery that are currently performed through an abdominal incision, including laparoscopically. Devices such as these are expected to reduce the need for inpatient hospital stay and decrease the likelihood of complications and their associated costs.

We plan to use our endoscopic, laparoscopic and general surgery experience, our internal product design expertise and our relationships with third-party product developers to further develop a pipeline of surgical devices to be utilized in treating intraperitoneal abnormalities such as gallstones, appendicitis, cancer of the intestinal tract, kidney cancer, trauma, reproductive disease tumors and liver conditions.

6

Table of Contents

Dr. Charles J. Filipi, our Chief Medical Officer, has been a pioneer in laparoscopic surgery and endoluminal surgery at Creighton University and is past president of the American Hernia Society. He has been the lead physician responsible for the development of our product candidates, and he has relationships with a number of physicians who are experts in these fields. We believe that Dr. Filipi will be able to utilize his expertise and these relationships to facilitate device development and the opportunities mentioned above. Some of these experts are part of our medical advisory board.

Market Opportunities

We believe the market for our products and product candidates is driven by:

Our lead product candidates are designed for use in the treatment of obesity patients. The incidence of obesity (defined as a body mass index (“BMI”) greater or equal to 30 and/or 100 pounds overweight) is increasing, despite increased public awareness of the health risks associated with obesity and the growth of the diet and fitness industries. The Centers for Disease Control and Prevention (“CDC”) reports that in 2009 – 2010, 35.7% of U.S. adults were obese and 16.9% of U.S. children and adolescents were obese. The CDC reports that this includes over 78 million U.S. adults and approximately 12.5 million children and adolescents that were obese. Some estimates project that 100 million Americans, or approximately 38% of the anticipated U.S. population, will be obese by the year 2017. The incidence of obesity is increasing not only in the U.S., but is becoming a problem world-wide, including in newly industrialized countries such as China and India.

Current treatment options for obesity include exercise and dieting, prescription drugs, new but unproven endoscopic procedures and bariatric surgical alternatives. Exercise and dieting are often not successful, and, if successful, the results are often not permanent. In addition, although there are a number of drug alternatives currently in the market for treating obesity, they often result in moderate weight loss (typically no more than 10% of body weight).

As a result of the foregoing, bariatric surgery has become more prevalent as an alternative. An estimated 350,000 to 400,000 bariatric surgical procedures are performed annually worldwide. Bariatric surgery is usually recommended for those people with a BMI of 35 or higher or for those who are approximately 100 pounds overweight. Currently, the most common bariatric surgery methods include gastric bypass, gastric banding and the gastric sleeve. Gastric bypass combines the creation of a small stomach pouch to restrict food intake and the construction of a duodenal bypass, thereby decreasing the body’s ability to absorb nutrients from food. In gastric banding procedures, a small inflatable/dilatable band (which allows adjustment to the size of the opening between the pouch and the stomach) is placed around the upper part of the stomach, creating a small pouch, so that patients feel full sooner. The FDA has approved an indication for use of the gastric band in procedures on people with a BMI of 30 or higher with co-morbidities. In the gastric sleeve procedure, the stomach volume is significantly reduced, which accelerates the flow of food through the stomach. These procedures are expensive and require abdominal wall incisions. It has been reported that at least 20% of gastric band patients require the removal of the gastric band within the first year following surgery. Some of the reported problems associated with the gastric band include erosion, migration, intolerance, leakage, and slippage.

7

Table of Contents

Our lead product candidates can also be used to treat GERD and GERD-related complications such as Barrett’s Esophagus. In GERD patients, the esophageal junction does not close completely and acid or bile from the stomach enters the esophagus. Both the hydrochloric acid and bile from the stomach can damage the esophagus. A significant portion of the adult population in the United States suffers from GERD symptoms. Left untreated for a prolonged period of time, GERD can lead to complications such as Barrett’s Esophagus, a precancerous change to the lining of the esophagus. Barrett’s Esophagus can develop into an often fatal form of cancer of the esophagus. Worldwide, there are approximately 200,000 GERD surgical procedures performed annually. None of the currently available outpatient endoscopic procedures has proven effective in reversing inflammation of the esophagus or the amount of acid reflux. Another common GERD complication is scar tissue in the esophagus that inhibits the movement of swallowed food and drink. This and other types of esophageal restrictions are treated by inserting a dilator tube or inflatable balloon at the stricture and dilating the esophagus. Approximately 2 million esophageal dilations are performed annually worldwide, and 20 million endoscopies are performed annually worldwide. Endoscopies require a bite block to protect both the endoscope and the patient’s teeth. We have developed an airway bite block, described below, that can be used during an endoscopy and is intended to prevent a low oxygen level during the procedure due to a restricted airway.

Our AMID Stapler^® is designed for use in open surgical repair of both inguinal (groin) and ventral (abdominal) hernias and for the approximation of tissue, including skin. We received Special 510K clearance for the AMID Stapler^® in February 2012. Hernias impact approximately 1% of the world’s population, and roughly 800,000 inguinal hernias are repaired annually in the United States. Greater than 60% of the inguinal hernia repairs performed in developed countries are performed using the Lichtenstein technique popularized by Dr. Amid. During the repair, mesh is affixed to tissues to prevent hernia recurrence. Hernias are also repaired through open incision without affixing mesh, and laparoscopically with mesh reinforcement.

Products

The AMID Stapler^®

We developed the AMID Stapler^® in cooperation with Dr. Parviz Amid, a pioneer of and renowned expert in the Lichtenstein Hernia Repair. This stapler uses non-absorbable titanium staples to repair inguinal (groin) or ventral (abdominal) hernias. The staples are used to fix mesh in place, which helps prevent the recurrence of a hernia. In November 2009, we received FDA clearance to market the AMID Stapler^® in the United States as a Class II device, and, in February 2010, we received CE Mark approval to market the stapler in the European Union and other countries requiring CE mark. After we commenced production of the AMID Stapler^® in 2010, we voluntarily suspended sales in order to implement several improvements and a more robust and reliable commercial manufacturing process. Thereafter, we submitted a “Special 510(k)” to the FDA that was cleared in February 2012. This clearance allows us to market the AMID Stapler^® in the United States and we expect to begin commercial sales in the United States in the second quarter of 2012. Additionally, we will supplement our Technical File prior to marketing the AMID Stapler^® in the European Union.

SMART Dilator^TM

Dilators are used when an endoscopy demonstrates the narrowing of the esophagus. Narrowing may be treated by administering GERD medication or by using a dilator to expand the esophagus. Approximately 800,000 dilations are performed in the United States each year. Studies have estimated that approximately 10,000 instances of perforation of the esophagus occur annually as a result of esophageal dilation. According to peer-reviewed literature, dilation results in a 0.5-1.0% perforation rate. Untreated perforation of the esophagus is fatal, usually within two days. Research indicates that, during dilation, the physician should place no greater than two pounds of pressure on the dilator. Our SMART Dilator^TM has a handle that changes from green to yellow and then to red, providing the physician a visual indicator of how close he or she is to the recommended two pound limit. Additionally, the SMART Dilator^TM handle locks in place when the force applied to the dilator exceeds 2.5 pounds of pressure. While there are numerous dilators on the market, none include a feedback mechanism similar to that contained in the SMART Dilator^TM.

In February 2009, we received FDA clearance to market the SMART Dilator^TM in the United States as a Class II device, and we continue to evaluate commercialization options.

8

Table of Contents

Bite Blocks

A bite block is used to protect the endoscope used in transoral gastrointestinal procedures and is required in all such procedures. A number of bite blocks are on the market.

Standard Bite Block. Our Standard Bite Block is designed with a bigger lip and slightly different aperture than other bite blocks on the market. Because this is a Class I device, significant testing has not been necessary; however, in 2008, Creighton University Medical Center performed a bite block study to test for comfort during endoscopic procedures in human patients. This is a Class I 510(k)-exempt device that requires no preclearance from the FDA prior to marketing.

Airway Bite Block. The Airway Bite Block contains a built-in airway that assists breathing in patients with larger tongues or smaller throats, usually because of obesity. The Airway Bite Block was tested following Institutional Review Board (IRB) approval at Creighton University Medical Center in 2008. The Airway Bite Block will come in two sizes. This is a Class I 510(k)-exempt device that requires no preclearance from the FDA prior to marketing.

We continue to evaluate commercialization options for the Standard and Airway Bite Blocks.

Product Candidates

We have prioritized our product development efforts on those candidates aimed at opportunities within gastroenterology, in which attractive markets combine with an emerging understanding of intralumenal surgery.

Intralumenal Gastroplasty Device for Obesity and GERD (“Gastroplasty Device”)

Our Gastroplasty Device consists of a set of instruments designed to perform incision-less, endoscopic surgery by introduction through the mouth and esophagus. Bariatric and GERD operations are generally performed through an external abdominal incision, and sometimes laparoscopically. Traditional surgery has the potential for significant complications and often requires an in-patient hospital stay, which is expensive.

The Gastroplasty Device is the most tested of our product candidates, and has demonstrated its potential for effectiveness. In animal tests and ex vivo human testing, the Gastroplasty Devices have been successful in obesity surgeries for suturing and excising tissue and reducing stomach size. We successfully tested our first investigational devices in five patients in Hungary, and follow up observations were reviewed in March 2012, which was approximately 18 months following the initial procedures. At the 18 month follow-up, we observed, through endoscopic visualization, that the operative site showed significant scar tissue as intended, with the scar forming a restrictive ring for weight loss or, in the case of GERD, a barrier to prevent acid from refluxing into the esophagus. We also observed that the weight loss and esophageal monitoring was satisfactory and as expected. We expect to continue in vivo human testing of this device in the United States in 2013. We are preparing separate GERD and obesity clinical trial protocols for this device and anticipate submitting the final investigational device exemption (“IDE”) trial plans to the FDA for review in 2013. We intend to apply to the FDA for clearance of the Gastroplasty Device for the GERD indication and approval for the obesity indication.

Barrett’s Excision Device for Treatment and Diagnosis (“Barrett’s Device”)

Barrett’s Esophagus, which is caused by GERD, is a condition in which the lining of the esophagus imitates the stomach mucosa, beginning at the esophageal junction and migrating upward. Barrett’s esophageal tissue is pre-cancerous and can result in difficulty in swallowing, malignancy and death. Our Barrett’s Device is designed to assist in both the diagnosis of and treatment of Barrett’s Esophagus.

Existing treatments include medication, laparoscopic surgery and cauterization. The Barrett’s Device allows the mucosa to be suctioned, sliced off and tested. The device also allows for cauterization of the affected area. No incision will be required, and the procedure will be an outpatient procedure. We expect this device to be more effective and less costly than existing procedures.

9

Table of Contents

In more than ten in vivo and ex vivo animal tests and five ex vivo human tests, the Barrett’s Device has successfully excised tissue with the desired width, length, depth and contour. We expect to conduct the first human testing of the Barrett’s Device in late 2013, following submission and review by FDA of an IDE for trials of this device.

T Fasteners for Upper GI Bleeding (“T Fastener Gun”)

The T Fastener Gun delivers small metal fasteners at the end of an endoscope. We believe that our T Fastener Gun can provide full-thickness stomach wall suturing for control of gastric bleeding. Existing devices apply energy or clips that are often too superficial, resulting in rebleeding. The T Fastener suture end is tightened, and because of its full thickness bite, a larger amount of tissue will compress the bleeding vessel.

The T Fastener Gun is in an early stage of development and has undergone in vivo and ex vivo animal studies. These tests have established the feasibility of the T Fastener Gun. We believe this device is a Class II 510(k) device that will require IDE clinical data to support a premarket notification for FDA clearance.

Novel Devices for Natural Orifice Transluminal Endoscopic Surgery (“NOTES”)

Natural Orifice Transluminal Endoscopic Surgery or NOTES is a method of operating in the abdominal cavity without making an incision in the abdominal wall. This surgery is also referred to as NO SCAR surgery. The natural orifices used in this type of procedure are the mouth and the rectum and, in females, the vagina. If the mouth is used, instruments are passed through this natural orifice out of the stomach and into the abdominal cavity.

NOTES includes surgeries for gallbladder removal, appendectomy, tubal ligation, removal of intestinal and reproductive organ cancer and hernia repair, all through the gastric, rectal or vaginal walls. Surgery utilizing the NOTES approach requires stabilization of long flexible instruments and the organs to be operated upon. We have received a license from Creighton University for a patent application for a magnetic gallbladder retractor that would enable improved operative exposure for gallbladder removal, as well as other devices to assist in NOTES procedures. We have not yet begun development of devices utilizing this technology.

Intellectual Property

We have exclusively licensed technology, know-how and patent applications from Creighton University for most of our products and product candidates. These applications include systems and techniques for minimally invasive gastrointestinal procedures, a dilator for use with an endoscope, bite blocks for use with an endoscope and for preserving airways of patients during endoscopy and the T Fastener Gun. In addition, we have certain rights to other Creighton University intellectual property that we have not yet defined as product candidates. In total, we have eight patent applications pending in the United States, including those that are exclusively licensed from Creighton. We are also pursuing several of these applications in other countries, and three such foreign patents have been issued.

Pursuant to our exclusive license and development agreement with Creighton University (the “Creighton Agreement”), we own all inventions conceived of and reduced to practice solely by our employees and agents, and all patent applications and patents claiming such inventions developed without the use of any licensed patent rights or associated know-how, and Creighton University owns all inventions conceived of and reduced to practice solely by Dr. Filipi, or any university employees or agents who work directly with Dr. Filipi in the course of performing duties for us, and all patent applications and patents claiming such inventions, which inventions, patent applications and all resulting licensed patent rights are subject to the exclusive license and development agreement. Together with the university, we jointly own all inventions conceived of and reduced to practice jointly by Dr. Filipi, and/or any university employees or agents who work directly with him and our employees or agents. Notwithstanding the foregoing, the university owns all inventions conceived of or reduced to practice under its research and development budget, and all patent applications and patents claiming such inventions, even if conceived of solely by our employees or agents, and such inventions, patent applications and all resulting licensed patent rights are subject to the Creighton Agreement.

10

Table of Contents

Creighton University is obligated to file, prosecute and maintain all licensed patents and all patent applications and patents disclosing and claiming inventions made in whole or in part by university employees, agents or contractors resulting from the research and development the university engages in on our behalf in such countries as we designate. We have the right, but not the obligation, at our sole expense, to enforce our licensed patent rights and associated know-how under the Creighton Agreement against any infringer, including the right to file suit for patent infringement naming Creighton University as a party, and the right to settle such suit with the university’s consent, which shall not be unreasonably withheld. Creighton University is entitled to 1.5% of any amount collected as a result of such judgment or settlement. In the event that we choose not to file suit for patent infringement within 180 days after becoming aware of infringement, Creighton University has the right, but not the obligation, at its sole expense, to enforce the licensed patent rights and associated know-how against any infringer, including the right to file suit for patent infringement naming us as a party, and the right to settle such suit with our consent, which shall not be unreasonably withheld. The university shall pay us 1.5% of any amount collected as a result of such judgment or settlement.

We believe that technological innovation is driving breakthroughs in the surgical markets that we intend to service. We have adopted a comprehensive intellectual property strategy that blends our efforts toward focused innovation with our business development activities designed to strategically in-source intellectual property rights.

We intend to develop, protect and defend our own intellectual property rights as dictated by the developing competitive environment. We value our intellectual property assets and believe we have benefited from our relationship with Creighton University and Dr. Filipi.

Licenses and Collaborative Relationships; Research and Development

Our strategy is to develop a portfolio of product candidates through a combination of internal development and external partnerships. Collaborations are key to our strategy, and, on May 26, 2006, we entered into the Creighton Agreement, which grants us the right to license and sublicense most of our product candidates and associated know-how, including the exclusive right to manufacture, use and sell the product candidates. The foregoing license is exclusive even with respect to Creighton University. Pursuant to the Creighton Agreement, we are obligated to pay Creighton University, on a quarterly basis, a royalty of 1.5% of the revenue collected worldwide from the sale of any product licensed under the agreement, less certain amounts, including without limitation chargebacks, credits, taxes, duties and discounts or rebates.

Creighton University provides all necessary facilities, including animal research laboratories, to accommodate Dr. Filipi’s research and development of licensed products and product candidates, and we compensate Creighton University for the use of such facilities in accordance with the Creighton Agreement. We recorded expenses for 2011 and 2010 of $45,000 and $52,000, respectively, in satisfaction of the indirect cost allowance equal to 20% of the direct and personnel costs for services conducted at the university or company facilities located within 100 miles of Omaha, Nebraska. Also pursuant to the agreement, the university agreed that Dr. Filipi would initially devote at least 90% of his working time during the four-year period that began May 26, 2006 and ended May 26, 2010 and would thereafter devote at least 50% of his time for the subsequent two years towards the research and development of any licensed product or product candidate under the agreement, including the development of any such product to a final design and prototype as a commercially viable product. The agreement further provides that Dr. Filipi shall assist us with the prosecution of any and all patent applications related to any such products developed under the agreement.

Pursuant to the Creighton Agreement, we are entitled to exercise our own business judgment and sole and absolute discretion over the marketing, sale, distribution, promotion, or other commercial exploitation of any licensed products, provided that if we have not commercially exploited or commenced development of a licensed patent and its associated know-how by the seventh anniversary of the later of the date of the agreement or the date such technology is disclosed to and accepted by us, then the licensed patent and associated know-how shall revert back to the university, with no rights retained by us, and the university will have the right to seek a third party with whom to commercialize such patent and associated know-how, unless we purchase one or more one-year extensions. In addition to the expenses incurred in connection with the Creighton Agreement, we have incurred research and development costs and expenses of $3.4 million and $2.7 million for the years ended December 31, 2011 and 2010, respectively.

11

Table of Contents

In January 2007, we signed a consulting agreement with Dr. Parviz Amid to help us develop a stapler for hernia repair. Dr. Amid is past president of the American Hernia Society and a pioneer of and renowned expert in the Lichtenstein hernia repair. Under this agreement, we have agreed to pay Dr. Amid a 4% royalty based on the worldwide net sales of any product developed by us with his assistance, including the AMID Stapler^®, for a period of ten years from the first commercial sale of each such product.

Competition

The market for our products is highly competitive due to the large number of products competing for market share and significant levels of commercial resources being utilized to promote those products. The following table sets forth some of the companies whose products we expect to compete with our products and product candidates:

In addition, our ability to compete may be affected because of the failure to educate physicians or the level of physician expertise. This may have the effect of making our products less attractive to buyers. Among the products with which we will directly compete, we expect to differentiate on the basis of enhanced safety, effectiveness and efficiency, as well as lower cost, in most cases. Several medical device companies are actively engaged in research and development of treatments for gastrointestinal abnormalities similar to the gastrointestinal abnormalities that are targeted by our product candidates. We cannot predict the basis upon which we will compete with new products marketed by others. Many of our competitors have substantially greater financial, operational, sales and marketing and research and development resources than we have.

As indicated, there are also other methods to treat obesity, such as diet, exercise and medicine. Other competitors have developed products such as medical implants that occupy volume in the stomach to promote the feeling of satiety (Helioscopie) or gastric sleeves to reduce food intake.

Government Regulation of our Medical Device Development Activities

Healthcare is heavily regulated by the federal government and by state and local governments. The federal laws and regulations affecting healthcare change constantly thereby increasing the uncertainty and risk associated with any healthcare-related venture.

12

Table of Contents

The federal government regulates healthcare through various agencies, including but not limited to the following: (i) the FDA, which administers the Food, Drug, and Cosmetic Act (“FD&C Act”), as well as other relevant laws; (ii) the Centers for Medicare & Medicaid Services (“CMS”), which administers the Medicare and Medicaid programs; (iii) the Office of Inspector General (“OIG”), which enforces various laws aimed at curtailing fraudulent or abusive practices including, by way of example, the Anti-Kickback Law, the Anti-Physician Self- Referral Law (commonly referred to as the Stark Law), the Anti-Inducement Law, the Civil Money Penalty Law, and the laws that authorize the OIG to exclude health care providers and others from participating in federal healthcare programs; and (iv) the Office of Civil Rights, which administers the privacy aspects of the Health Insurance Portability and Accountability Act of 1996 (“HIPAA”). All of the aforementioned are agencies within the Department of Health and Human Services (“HHS”). Healthcare is also provided or regulated, as the case may be, by the Department of Defense through its TriCare program, by the Department of Veterans Affairs under, among other laws, the Veterans Health Care Act of 1992, by the Public Health Service within HHS under the Public Health Service Act, by the Department of Justice through the Federal False Claims Act and various criminal statutes, and by state governments under the Medicaid program and their internal laws regulating all healthcare activities.

FDA Regulation of the Design, Manufacture and Distribution of Medical Devices

The testing, manufacture, distribution, advertising and marketing of medical devices are subject to extensive regulation by federal, state and local governmental authorities in the United States, including the FDA, and by similar agencies in other countries. Any product that we develop must receive all relevant regulatory clearances or approvals, as the case may be, before it may be marketed in a particular country. Under United States law, a “medical device” (“device”) is an article, which, among other things, is intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment or prevention of disease, in man or other animals (see FD&C Act § 201(h)). Substantially all of the articles being developed by SafeStitch are classified as medical devices and subject to regulation by numerous agencies and legislative bodies, including the FDA and its foreign counterparts.

Devices are subject to varying levels of regulatory control, the most comprehensive of which requires that a clinical evaluation be conducted before a device receives clearance or approval for commercial distribution. The FDA classifies medical devices into one of three classes. Class I devices are relatively simple and can be manufactured and distributed with general controls. Class II devices are somewhat more complex and require greater scrutiny. Class III devices are new and frequently help sustain life.

In the United States, a company generally can obtain permission to distribute a new device in two ways – through a Section 510(k) premarket notification application (“510(k) submission”), or through a Section 515 premarket approval (“PMA”) application. The 510(k) submission applies to any device that is substantially equivalent to a “Predicate Device” (a device first marketed prior to May 28, 1976 or a device marketed after that date which was substantially equivalent to a pre-May 28, 1976 device). These devices are either Class I or Class II devices. Under the 510(k) submission process, the FDA will issue an order finding substantial equivalence to a Predicate Device and permitting commercial distribution of that device for its intended use. A 510(k) submission must provide information supporting its claim of substantial equivalence to the Predicate Device. The FDA permits certain low risk medical devices to be marketed without requiring the manufacturer to submit a premarket notification. In other instances, the FDA may not only require that a premarket notification be submitted, but also that such notification be accompanied by clinical data. If clinical data from human experience are required to support the 510(k) submission, these data must be gathered in compliance with IDE regulations for clinical trials performed in the United States. The FDA review process for premarket notifications submitted pursuant to section 510(k) should take about 90 days on average, but it can take substantially longer if the agency has concerns. Furthermore, there is no guarantee that the agency will “clear” the device for marketing, in which case the device cannot be distributed in the United States. There is not any guarantee that the agency will deem the article subject to the 510(k) process, as opposed to the more time-consuming, resource intensive and problematic PMA process described below.

The more comprehensive PMA approval process applies to a new device that is (a) not substantially equivalent to a Predicate Device or (b) to be used in supporting or sustaining life or preventing impairment. These devices are normally Class III devices and can only be marketed following approval of a PMA. For example, most implantable devices are subject to the PMA approval process. Two steps of FDA approval generally are required before a company can market a product in the U.S. that is subject to Section 515 PMA approval, as compared to a Section 510(k) clearance. First, a company must comply with IDE regulations in connection with any human clinical investigation of the device; however those regulations permit a company to undertake a clinical study of a “non-significant risk” device without formal FDA approval. Prior express FDA approval is required if the device is a significant risk device. If there is any doubt as to whether a device is a “non-significant risk” device, companies normally seek prior approval from the FDA. Second, the FDA must review a company’s PMA application, which contains, among other things, clinical information acquired under the IDE. The FDA will approve the PMA application if it finds there is reasonable assurance the device is safe and effective for its intended use. The PMA process takes substantially longer than the 510(k) process.

13

Table of Contents

We intend to continue in discussions with the FDA regarding the appropriate regulatory approval pathway for our Gastroplasty Device for the treatment of GERD and for the treatment of obesity. We have not yet sought final FDA approval to conduct any clinical studies of any of our licensed products in the United States. There is no assurance that the FDA would permit us to conduct such clinical studies and no assurance that the FDA would agree with our study design, statistical methods or endpoints.

Even when a clinical study has been approved or cleared by the FDA or deemed approved, the study is subject to factors beyond a manufacturer’s control, including, but not limited to the fact that the institutional review board at a given clinical site might not approve the study, might decline to renew approval which is required annually, or might suspend or terminate the study before the study has been completed. The interim results of a study may also not be satisfactory; leading the sponsor to terminate or suspend the study on its own initiative or the FDA may terminate or suspend the study. There is no assurance that a clinical study at any given site will progress as anticipated; there may be an insufficient number of patients who qualify for or agree to participate in the study, or the investigator at the site may have priorities other than the study. Also, there can be no assurance that the clinical study will provide sufficient evidence to assure the FDA that the product is either (i) safe and effective, a prerequisite for FDA approval of a PMA, or (ii) substantially equivalent in terms of safety and effectiveness to a predicate device, a prerequisite for clearance under 510(k). Even if the FDA approves or clears a device, it may limit its intended uses in such a way that manufacturing and distributing the device may not be commercially feasible.

After clearance or approval to market is given, the FDA and foreign regulatory agencies, upon the occurrence of certain events, are authorized under various circumstances to require PMA post market surveillance and extended clinical follow up, the clearance or approval or require changes to a device, its manufacturing process or its labeling or additional proof that regulatory requirements have been met.

A manufacturer of a device approved through the PMA process is not permitted to make changes which could affect the device’s safety or effectiveness without first submitting a supplement application to its PMA and obtaining FDA approval for that supplement. In some instances, the FDA may require clinical trials to support a supplement application. A manufacturer of a device cleared through a 510(k) submission must submit another premarket notification if it intends to make a change or modification in the device that could significantly affect the safety or effectiveness of the device, such as a significant change or modification in design, material, chemical composition, energy source or manufacturing process. Any change in the intended uses of a PMA device or a 510(k) device requires an approval supplement or cleared premarket notification. Exported devices are subject to the regulatory requirements of each country to which the device is exported, as well as certain FDA and other federal export requirements and possible restrictions.

As a company that intends to manufacture medical devices, we are required to register with the FDA before we begin to manufacture devices for commercial distribution. As a result, we and any entity that manufactures products on our behalf will be subject to periodic inspection by the FDA for compliance with the FDA’s Quality System Regulation requirements and other regulations. In the European Union, we will be required to maintain certain International Organization for Standardization (“ISO”) certifications in order to sell products and we and/or our manufacturers must undergo periodic inspections by notified bodies to obtain and maintain these certifications. These regulations require us and our manufacturers to manufacture products and maintain documents in a prescribed manner with respect to design, manufacturing, testing and control activities. Further, we are required to comply with various FDA and other agency requirements for labeling and promotion. The Medical Device Reporting regulations require that we provide information to the FDA whenever there is evidence to reasonably suggest that a device may have caused or contributed to a death or serious injury or, if a malfunction were to occur, could cause or contribute to a death or serious injury. In addition, the FDA prohibits us from promoting a medical device for unapproved indications.

14

Table of Contents

The FDA in the course of enforcing the FD&C Act may subject a company to various sanctions for violating FDA regulations or provisions of the Act, including , by way of example, requiring recalls, issuing Warning Letters, seeking to impose civil money penalties, seizing devices that the agency believes are non-compliant, seeking to enjoin distribution of a specific type of device or other product, seeking to revoke a clearance or approval, seeking disgorgement of profits and seeking to criminally prosecute a company and its officers and other responsible parties.

Recently Enacted Health Care Reform Legislation

Congress passed health care reform legislation that President Obama signed into law on March 23, 2010 and March 30, 2010. The package signed into law by the President is considered by some to be the most dramatic change to the country’s health care system in decades.

The principal aim of the law as currently enacted is to expand health insurance coverage to approximately 32 million Americans who are currently uninsured. The law’s most far-reaching changes do not take effect until 2014, including a requirement that most Americans carry health insurance. The effect of these significant coverage expansions on the sales of the Company’s products is unknown and speculative at this point.

The enacted legislation contains many provisions designed to generate the revenues necessary to fund the coverage expansions. The most relevant of these provisions are those that impose fees or taxes on certain health-related industries, including medical device manufacturers. Beginning in 2013, each medical device manufacturer will have to pay an excise tax (or sales tax) in an amount equal to 2.3 percent of the price for which such manufacturer sells its medical devices. This tax applies to all medical devices, including the Company’s products and product candidates.

The legislation as enacted also provides for increased enforcement of the fraud and abuse regulations discussed below.

It should be noted that the constitutionality of certain provisions of the health care reform law, including the mandate to purchase insurance, are before the Supreme Court of the Unites States, which is expected to reach some decision on or before June 25, 2012.

Third-Party Payments, Especially Payments by Medicare and Medicaid

A. Medicare and Medicaid Coverage

Because some of the projected patient population that could potentially benefit from our devices is elderly, Medicare would likely be a potential source of reimbursement. Medicare is a federal program that provides certain hospital and medical insurance benefits to persons age 65 and over, certain disabled persons, persons with end-stage renal disease and those suffering from Lou Gehrig’s Disease. In contrast, Medicaid is a medical assistance program jointly funded by federal and state governments and administered by each state pursuant to which benefits are available to certain indigent patients. The Medicare and Medicaid statutory frameworks are subject to administrative rulings, interpretations and discretion that affect the amount and timing of reimbursement made under Medicare and Medicaid.

Medicare reimburses for medical devices in a variety of ways depending on where and how the device is used. However, Medicare only provides reimbursement if CMS, either directly or through one of its contractors, determines that the device should be covered and that the use of the device is consistent with the coverage criteria. A coverage determination can be made at the local level (“Local Coverage Determination”) by the Medicare administrative contractor (formerly called carriers and fiscal intermediaries), a private contractor that processes and pays claims on behalf of CMS for the geographic area where the services were rendered, or at the national level by CMS through a National Coverage Determination. There are statutory provisions intended to facilitate coverage determinations for new technologies under the Medicare Prescription Drug, Improvement, and Modernization Act of 2003 (“MMA”) §§ 731 and 942. Coverage presupposes that the device has been cleared or approved by the FDA and, further, that the coverage will be no broader than the FDA approved intended uses of the device (i.e., the device’s label) as cleared or approved by the FDA, but coverage can be narrower. In that regard, a narrow Medicare coverage determination may undermine the commercial viability of a device.

15

Table of Contents

CMS has issued a National Coverage Determination with respect to bariatric surgery under which CMS will cover the surgery only for treatment of co-morbidities associated with morbid obesity, and only under the following conditions:

There can be no assurance that bariatric surgery relying on our primary device would be covered under the National Coverage Determination noted above.

Seeking to modify a coverage determination, whether local or national, is a time-consuming, expensive and highly uncertain proposition, especially for a new technology, and inconsistent local determinations are possible. On average, according to an industry report, Medicare coverage determinations for medical devices lag 15 months to five years or more behind FDA approval for respective devices. Moreover, Medicaid programs and private insurers are frequently influenced by Medicare coverage determinations. Our inability to obtain a favorable coverage determination may adversely affect our ability to market our products and thus, the commercial viability of our products.

B. Reimbursement Levels

Even if Medicare and other third-party payor programs cover the procedures that use our devices, the level of reimbursement may not be sufficient for commercial success. The Medicare reimbursement levels for covered procedures are determined annually through three sets of rulemakings, one for outpatient departments of hospitals under the Outpatient Prospective Payment System (“OPPS”), another for the inpatient departments of hospitals under the Inpatient Perspective Payment System (“IPPS”), and the third for procedures in physicians’ offices under the Resource-Based Relative Value Scales (“RBRVS”) (the Medicare fee schedule). If the use of a device is covered by Medicare, a physician’s ability to bill a Medicare patient more than the Medicare allowable amount is significantly constrained by the rules limiting balance billing. For covered services in a physician’s office, Medicare normally pays 80% of the Medicare allowable amount and the beneficiary pays the remaining 20%, assuming that the beneficiary has met his or her annual Medicare deductible and is not also a Medicaid beneficiary. For services performed in an outpatient department of a hospital, the patient’s co-payment under Medicare may exceed 20%, depending on the service and depending on whether CMS has set the co-payment at greater than 20%. If a device is used as part of an in-patient procedure, the hospital where the procedure is performed is reimbursed under the IPPS. In general, IPPS provides a single payment to the hospital based on the diagnosis at discharge and devices are not separately reimbursed under IPPS.

Usually, Medicaid pays less than Medicare, assuming that the state covers the service. In addition, private payors, including managed care payors, increasingly are demanding discounted fee structures and the assumption by healthcare providers of all or a portion of the financial risk. Efforts to impose greater discounts and more stringent cost controls upon healthcare providers by private and public payors are expected to continue.

Significant limits on the scope of services covered or on reimbursement rates and fees on those services that are covered could have a material adverse effect on our ability to commercialize our devices and therefore, on our liquidity and financial condition.

16

Table of Contents

Anti-Fraud and Abuse Rule

There are extensive federal and state laws and regulations prohibiting fraud and abuse in the healthcare industry that can result in significant criminal and civil penalties that can materially affect us. These federal laws include, by way of example, the following:

Sanctions for violating these federal laws include criminal and civil penalties that range from punitive sanctions, damage assessments, monetary penalties, imprisonment, denial of Medicare and/or Medicaid payments or exclusion from the Medicare and/or Medicaid programs. These laws also impose an affirmative duty on those receiving Medicare or Medicaid funding to ensure that they do not employ or contract with persons excluded from Medicare and other government programs.

Many states have adopted or are considering legislative proposals similar to the federal fraud and abuse laws, some of which extend beyond the Medicare and Medicaid programs, to prohibit the payment or receipt of remuneration for the referral of patients and physician self-referrals regardless of whether the service was reimbursed by Medicare or Medicaid. Many states have also adopted or are considering legislative proposals to increase patient protections, such as limiting the use and disclosure of patient specific health information. These state laws also impose criminal and civil penalties similar to the federal laws.

In the ordinary course of their business, medical device manufacturers and suppliers have been and are regularly subject to inquiries, investigations and audits by federal and state agencies that oversee these laws and regulations. Recent federal and state legislation has greatly increased funding for investigations and enforcement actions, which have increased dramatically over the past several years. This trend is expected to continue. Private enforcement of healthcare fraud also has increased due in large part to amendments to the civil False Claims Act in 1986 that were designed to encourage private persons to sue on behalf of the government. These whistleblower suits by private persons, known as qui tam relators, may be filed by almost anyone, including present and former patients or nurses and other employees, as well as competitors. HIPAA, in addition to its privacy provisions, created a series of new healthcare-related crimes.

As federal and state budget pressures continue, federal and state administrative agencies may also continue to escalate investigation and enforcement efforts to root out waste and to control fraud and abuse in governmental healthcare programs. A violation of any of these federal and state fraud and abuse laws and regulations could have a material adverse effect on a supplier’s liquidity and financial condition. An investigation into the use of a device by physicians may dissuade physicians from either purchasing or using the device. This could have a material adverse effect on our ability to commercialize our devices.

17

Table of Contents

The Privacy Provisions of HIPAA

HIPAA, among other things, protects the privacy and security of individually identifiable health information by limiting its use and disclosure. HIPAA directly regulates “covered entities,” such as healthcare providers, insurers and clearinghouses, and regulates “business associates,” with respect to the privacy of patients’ medical information. All entities that receive and process protected health information are required to adopt certain procedures to safeguard the security of that information. It is uncertain whether we would be deemed to be a covered entity under HIPAA, and based on our current business model, it is likely that we would be a business associate. Nevertheless, we will likely be contractually required to physically safeguard the integrity and security of any patient information that we receive, store, create or transmit. If we fail to adhere to our contractual commitments, then our physician or hospital customers may be subject to civil monetary penalties, which could adversely affect our ability to market our devices. Recent changes in the law wrought by the HITECH Act provisions of the American Recovery and Reinvestment Act of 2009 increase the duties of business associates and covered entities with respect to protected health information, thereby subjecting them to direct government regulation, increasing their compliance costs and their exposure to civil monetary penalties and other government sanctions. While the law does not alter the definition of a business associate, it makes it more likely that covered entities with whom we are likely to do business will require us to enter into business associate agreements.

Manufacturing

We are currently modifying our prototype lab, located in Miami, Florida, to accommodate the commercial manufacture of the AMID Stapler^®, which we intend to launch in the second quarter of 2012. In addition, we intend to continue to use this facility for the manufacture of prototypes and non-commercial components, device prototypes and non-commercial finished devices of certain of our product candidates for testing, including for limited use in animal or human clinical testing. We have also entered into agreements with third party manufacturers for the manufacture of prototypes for certain of our products. These suppliers and their manufacturing facilities must comply with FDA regulations, current quality system regulations (referred to as QSRs), which include current good manufacturing practices (cGMPs) or ISO certifications where applicable, and to the extent laboratory analysis is involved, current good laboratory practices (cGLPs), where applicable.

Sales & Marketing

We currently have limited sales, marketing and distribution personnel. We have recently hired six direct sales representatives, under the management of our Director of Sales, and a Director of Marketing. In order to commercialize any products that are approved or cleared for commercial sale, we must continue to build a sales and marketing infrastructure, collaborate with third parties possessing sales and marketing experience and/or utilize a combination of internal and third party resources. We intend to build our sales and marketing infrastructure to market some of our product or product candidates, and we may collaborate with companies established in this industry to market and sell certain of our products, if cleared or approved, as the case may be. Such collaborations could take the form of joint ventures or sales, marketing or distribution agreements. We intend to distribute our products, including our AMID Stapler^®, through our own sales and marketing organization and through independent contractor and distribution agreements with companies possessing established sales and marketing operations in the medical device industry, but there can be no assurance that we will successfully be able to build a sales and marketing infrastructure or be able to enter into independent contractor and distribution agreements on terms acceptable to us or at all.

Employees

As of December 31, 2011, we had 29 full-time employees, six of whom hold advanced degrees. We plan to add to our headcount in key functional areas as required to commence commercialization activities and further the development of our product candidates. None of our employees are represented by a collective bargaining agreement.

18

Table of Contents

Executive Officers of the Registrant

Jeffrey G. Spragens. Mr. Spragens, 70, has served as our President and Chief Executive Officer and as a member of our Board of Directors since our acquisition of SafeStitch LLC in September 2007, and he has served as Business Manager of SafeStitch LLC, of which he was a founding member, since August 2005. From January 2002 to December 2006, Mr. Spragens was a member of Board of Directors of ETOC, Inc., a privately owned hotel and lodging company based in Minneapolis, Minnesota. Since April 2002, he has been a Founding Board of Directors Member and Treasurer of the Foundation for Peace, Washington, D.C. From 1990 to 1995, he was Managing Partner, Gateway Associates, Inc., a company that secured full subdivision and planning approval for properties under its control. Prior to that and from 1987 to 1993, he was one of three founding board of directors members of North American Vaccine, an American Stock Exchange listed company sold to Baxter International in 1999. Mr. Spragens also has previous experience as a developer and attorney.

Charles J. Filipi M.D. Dr. Filipi, 71, has served as our Chief Medical Officer (f/k/a Medical Director) and a member of our Board of Directors since our acquisition of SafeStitch LLC in September 2007. Dr. Filipi was a founding member of SafeStitch LLC in August 2005 and has served as its Medical Director since 2006. He is also Professor of Surgery in the Department of Surgery at Creighton University School of Medicine in Omaha, Nebraska and has served in this position since 1999. Dr. Filipi has also served as president of the American Hernia Society, editor of the Journal Hernia and has published approximately 100 peer-reviewed articles and fifty-one book chapters. He has been the inventor of over twenty provisional or utility patents. His primary areas of interest are intralumenal surgery for the correction of gastroesophageal reflux disease, Barrett’s Esophagus, and obesity.

James J. Martin, C.P.A. Mr. Martin, 45, has served as our Chief Financial Officer since January 2011, and, from July 2010 through January 2011, Mr. Martin served as our Controller. Mr. Martin has served as Vice President of Finance for Aero Pharmaceuticals, Inc. (“Aero”) a privately-held pharmaceutical distributor and Chief Financial Officer of Non-Invasive Monitoring Systems, Inc.(“NIMS”), a publicly-held medical device company since January 2011. From July 2010 through January 2011, Mr. Martin served as Controller of NIMS and Aero. Prior to joining SafeStitch, from 2008 through 2010, Mr. Martin served as Controller of AAR Aircraft Services-Miami, a subsidiary of AAR Corp, an aerospace and defense company in which he was responsible for all financial reporting and inventory logistics. From 2005-2008, Mr. Martin served as Controller of Avborne Heavy Maintenance, a commercial aircraft maintenance repair and overhaul company. In addition to his career in finance and accounting, Mr. Martin served five years in the United States Navy as an Operations Specialist.

Glossary of Terms

“Barrett’s Esophagus” is a complication of severe chronic GERD involving changes in the cells of the tissue that line the bottom of the esophagus. These cells become irritated when the contents of the stomach back up (refluxes), resulting in a small, but definite, increased risk of cancer of the esophagus. The diagnosis results upon seeing (through endoscopy) an orange esophageal lining (mucosa) that extends a short distance (usually less than 2.5 inches) up the esophagus from the gastroesophageal junction and findings of intestinal type cells (goblet cells) seen on histological examinations of biopsy tissue.

“Bariatric” relates to the branch of medicine that deals with the treatment of obesity and allied diseases.

“Endoscopic” is a procedure utilizing an illuminated, usually fiber-optic flexible or rigid tubular instrument, for visualizing the interior of a hollow organ or part (such as the esophagus) for diagnostic or therapeutic purposes that typically has one or more channels to enable passage of instruments.

“Ex vivo” means outside of a living animal or human.

“Gastroplasty” is the surgical manipulation of gastric (stomach) tissue.

19

Table of Contents

“GERD” is gastrointestinal reflux disease, a highly variable chronic condition that is characterized by periodic episodes of acid reflux usually accompanied by heartburn and that may result in histopathologic changes in the esophagus.

“Histological” relates to the tissue changes characteristic of disease or that affect a part of or accompany a disease.

“Inguinal” refers to the groin area or lower lateral region of the abdomen.

“Intralumenal” refers to within the lumen of a hollow organ. Hollow organs include the esophagus, stomach and small and large intestines, as well as the heart, arteries, veins, ureter and urethra.

“Intraperitoneal” refers to within the abdominal cavity.

“In vivo” means inside of a living animal or human.

“Laparoscopic” is surgery utilizing a small incision to examine the abdominal cavity.

“Lumen” is the central opening in a hollow organ.

“Medical device” is an article, which, among other things, is intended for use in the diagnosis of disease or other conditions, or in the cure, mitigation, treatment or prevention of disease, in man or other animals.

“Transoral” refers to procedures originating through the mouth.

“Transluminal” is the egress of instrumentation across the intestinal wall.

“Ventral” refers to the side of the body opposite the dorsal spine.

An investment in our company involves a significant level of risk. Investors should carefully consider the risk factors described below together with the other information included in this Annual Report on Form 10-K. If any of the risks described below occurs, or if other risks not identified below occur, our business, financial condition, and results of operations could be materially adversely affected.

Risks Related to our Business

We have a history of operating losses, and we do not expect to become profitable in the near future.

We are a medical device company with a limited operating history. We remain a developmental stage enterprise, and we are not profitable and have incurred losses since our inception. We do not anticipate that we will generate revenue from the sale of products until the second quarter of 2012. Three of our products may currently be marketed in the United States without further FDA clearance or approval. We continue to incur research and development and general and administrative expenses related to our operations. Our net losses for the years ended December 31, 2011 and 2010 were $5.7 million and $5.3 million, respectively, and we had an accumulated deficit of $22.8 million as of December 31, 2011. We expect to continue to incur losses for the foreseeable future, and these losses will likely increase as we prepare for clinical trials of our product candidates and begin to commercialize our cleared or approved products. If our product candidates fail in clinical trials or do not gain regulatory clearance or approval, or if our product candidates do not achieve market acceptance, we may never become profitable. Even if we achieve profitability in the future, we may not be able to sustain profitability in subsequent periods.

20

Table of Contents

We will require substantial additional funding, which may not be available to us on acceptable terms, or at all.

We intend to advance multiple additional product candidates through clinical and pre-clinical development. We will need to raise substantial additional capital to engage in our clinical and pre-clinical development and commercialization activities.

Our future funding requirements will depend on many factors, including but not limited to:

Until we can generate a sufficient amount of product revenue to finance our cash requirements, which we may never do, we expect to finance future cash needs primarily through public or private equity offerings, debt financings or strategic collaborations. We do not know whether additional funding will be available on acceptable terms, or at all. If we are not able to secure additional funding when needed, we may have to delay, reduce the scope of or eliminate one or more of our clinical trials or research and development programs. To the extent that we raise additional funds by issuing equity securities, our stockholders may experience significant dilution, and debt financing, if available, may involve restrictive covenants. To the extent that we raise additional funds through collaboration and licensing arrangements, it may be necessary to relinquish some rights to our product candidates or grant licenses on terms that may not be favorable to us.

Healthcare policy changes, including recently enacted legislation reforming the U.S. healthcare system, may have a material adverse effect on our financial condition and results of operations.

Healthcare costs have risen significantly over the past decade, and there have been and continue to be proposals by legislators, regulators and third-party payors to keep these costs down. As discussed above in “Item 1. Business”, Congress passed health care reform legislation that President Obama signed into law in March 2010. While the most immediate impact on device manufacturers is the imposition of a 2.3 percent tax beginning in 2013, the other effects of the law on our business and sector remain uncertain. Over the next few years, the administration can be expected to issue rules implementing the new reforms and those regulations could have adverse consequences for device manufacturers.

In addition to the legislation discussed above, various healthcare reform proposals have also emerged at the state level. We cannot predict what additional healthcare initiatives, if any, will be implemented at the federal or state level, or the effect any such future legislation or regulation will have on us. In addition to the taxes imposed by the new federal legislation, an expansion in government’s role in the U.S. healthcare industry may lower reimbursements for our products, reduce medical procedure volumes and materially adversely affect our business, financial condition and results of operations.

21

Table of Contents

Continued worldwide economic and market instability may materially and adversely affect the demand for our products and, if and when approved, our product candidates, as well as our ability to obtain credit or secure funds through sales of our stock, which may materially and adversely affect our business, financial condition and ability to fund our operations.

Worldwide economic conditions may reduce the demand for new and innovative medical devices, resulting in delayed market acceptance of our products and, if and when approved, our product candidates. Such a delay could have a material adverse impact on our business, expected cash flows, results of operations and financial condition.

Additionally, we have funded our operations to date primarily through private sales of our common and preferred stock and through borrowings under credit facilities available to us from stockholders and other individuals, including our existing $4.0 million line of credit which will mature in June 2013. Any economic turmoil and instability in the world’s equity and credit markets may materially adversely affect our ability to sell additional shares of our stock and/or borrow cash under existing or new credit facilities. There can be no assurance that we will be able to raise additional working capital on acceptable terms or at all. Our inability to raise additional working capital on acceptable terms would materially and adversely affect our liquidity and could materially adversely affect our ability to continue our operations.

Some of our technologies are in an early stage of development and are unproven.

We are engaged in the research and development of intralumenal medical devices that manipulate tissues for the treatment of intraperitoneal abnormalities, including obesity, GERD, hernia formation, Barrett’s Esophagus, esophageal obstructions and upper gastrointestinal bleeding. The effectiveness of our technologies is not well-known in, or accepted generally by, the clinical medical community. There can be no assurance that we will be able to successfully employ our technologies as surgical, therapeutic or diagnostic solutions for any intraperitoneal abnormalities. Our failure to establish the efficacy and safety of our technologies would have a material adverse effect on our business.

Our product research and development activities may not result in commercially viable products.

Some of our product candidates are still in early stages of development and are prone to the risks of failure inherent in medical device product development. We will likely be required to undertake significant clinical trials to demonstrate to the FDA that our licensed devices are safe and effective for their intended uses or that they are substantially equivalent in terms of safety and effectiveness to an existing, lawfully marketed non-PMA device. We may also be required to undertake clinical trials by non-U.S. regulatory agencies. Clinical trials are expensive and uncertain processes that may take years to complete. Failure can occur at any point in the process, and early positive results do not ensure that the entire clinical trial will be successful. Product candidates in clinical trials may fail to show desired efficacy and safety traits despite early promising results. A number of companies in the medical device industry have suffered significant setbacks in advanced clinical trials, even after obtaining promising results at earlier points.

The results of previous clinical experience with our devices and devices similar to those that we are developing may not be indicative of future results, and our current and planned clinical trials may not satisfy the requirements of the FDA or other non-U.S. regulatory authorities.

Positive results from limited in vivo and ex vivo animal trials we have conducted or early clinical experience with the test articles or with similar devices should not be relied upon as evidence that later-stage or large-scale clinical trials will succeed. We will be required to demonstrate with substantial evidence through well-controlled clinical trials that our product candidates either (i) are safe and effective for their intended uses or (ii) are substantially equivalent in terms of safety and effectiveness to devices that are already marketed under Section 510(k).

22

Table of Contents

Further, our product candidates may not be cleared or approved, as the case may be, even if the clinical data are satisfactory and support, in our view, clearance or approval. The FDA or other non-U.S. regulatory authorities may disagree with our trial design and our interpretation of the clinical data. Any of these regulatory authorities may change requirements for the clearance or approval of a product candidate even after reviewing and providing comment on a protocol for a pivotal clinical trial that has the potential to result in FDA approval. These regulatory authorities may also clear or approve a product candidate for fewer or more limited uses than we request or may grant clearance or approval contingent on the performance of costly post-marketing clinical trials. In addition, the FDA or other non-U.S. regulatory authorities may not approve or clear the labeling claims necessary or desirable for the successful commercialization of our product candidates.

We are highly dependent on the success of our products and product candidates, and we cannot give any assurance that our product candidates will receive regulatory clearance or that any of our products or future products will be successfully commercialized.

We are highly dependent on the success of our products and product candidates, especially the Gastroplasty Device and the AMID Stapler^®. We cannot give any assurance that the FDA will permit us to clinically test or grant regulatory clearance for the Gastroplasty Device, nor can we give any assurance that the Gastroplasty Device or any of our other products will be successfully commercialized, for a number of reasons, including without limitation the potential introduction by our competitors of more clinically-effective or cost-effective alternatives or failure in our sales and marketing efforts, or our failure to obtain positive coverage determinations or reimbursement. Any failure to obtain clearance or approval of our products or to successfully commercialize them would have a material and adverse effect on our business.

If our competitors develop and market products that are more effective, safer or less expensive than our products and future products, our commercial opportunities will be negatively impacted.

The life sciences industry is highly competitive, and we face significant competition from many medical device companies that are researching and marketing products designed to address the intraperitoneal abnormalities we are endeavoring to address. We are currently developing and commercializing medical devices that will compete with other medical devices that currently exist or are being developed. Products we may develop in the future are also likely to face competition from other medical devices and therapies. Many of our competitors have significantly greater financial, manufacturing, marketing and product development resources than we do. Large medical device companies, in particular, have extensive experience in clinical testing and in obtaining regulatory clearances or approvals for medical devices. These companies also have significantly greater research and marketing capabilities than we do. As indicated, there are also other methods to treat obesity, such as diet, exercise and medicine. Other competitors have developed products such as medical implants that occupy volume in the stomach to promote the feeling of satiety (Helioscopie) or gastric sleeves to reduce food intake. Some of the medical device companies we expect to compete with include USGI Medical, Satiety, EndoGastric Solutions, Inc., Medigus, Ltd., C.R. Bard, Inc, ValenTx, Inc., GI Dynamics, Inc., Medical Equipment Services America, Inc., BARRX Medical, Inc., Covidien, Boston Scientific Corporation, ConMed Corporation, Cook Medical Supply, Inc., Miller Medical Specialties, U.S. Endoscopy and a number of bite block manufacturers. In addition, many other universities and private and public research institutions are or may become active in research involving surgical devices for gastrointestinal abnormalities and minimally invasive surgery.

We believe that our ability to successfully compete will depend on, among other things:

23

Table of Contents

If our competitors market products that are more effective, safer, easier to use or less expensive than our products or future products, or that reach the market sooner than our product candidates, we may not achieve commercial success. In addition, the medical device industry is characterized by rapid technological change. It may be difficult for us to stay abreast of the rapid changes in each technology. If we fail to stay at the forefront of technological change, we may be unable to compete effectively. Technological advances or products developed by our competitors may render our technologies or product candidates obsolete or less competitive.

Our product development activities could be delayed or stopped.

We do not know whether other planned clinical trials will be completed on schedule, or at all, and we cannot guarantee that our planned clinical trials will begin on time or at all. The commencement of our planned clinical trials could be substantially delayed or prevented by several factors, including:

The completion of our clinical trials could also be substantially delayed or prevented by several factors, including:

24

Table of Contents

Our clinical trials may be suspended or terminated at any time by us, the FDA, other regulatory authorities or the IRB for any given site. Any failure or significant delay in completing clinical trials for our product candidates could materially harm our financial results and the commercial prospects for our product candidates.

The regulatory approval and clearance processes are expensive, time-consuming and uncertain and may prevent us or our collaboration partners from obtaining approvals or clearances, as the case may be, for the commercialization of some or all of our product candidates.

The research, testing, manufacturing, labeling, approval, clearance, selling, marketing and distribution of medical devices are subject to extensive regulation by the FDA and other non-U.S. regulatory authorities, which regulations differ from country to country. We are not permitted to market our product candidates in the United States until we receive a clearance letter under the 510(k) process or approval of a PMA from the FDA, depending on the nature of the device. We intend to continue discussions with the FDA regarding the appropriate regulatory approval for our Gastroplasty Device for the treatment of GERD and for the treatment of obesity. Obtaining approval of any PMA can be a lengthy, expensive and uncertain process. While the FDA normally reviews and clears a premarket notification in 90 days, there is no guarantee that our future product candidates will qualify for this more expeditious regulatory process, which is reserved for Class I and II devices, nor is there any assurance, that even if a device is reviewed under the 510(k) premarket notification process, that the FDA will review it expeditiously or determine that the device is substantially equivalent to a lawfully marketed non-PMA device. If the FDA fails to make this finding, then we cannot market the device. In lieu of acting on a premarket notification, the FDA may seek additional information or additional data which would further delay our ability to market the product.

Regulatory approval of a PMA, PMA supplement or clearance pursuant to a 510(k) premarket notification is not guaranteed, and the approval or clearance process, as the case may be, is expensive, uncertain and may, especially in the case of the PMA application, take several years. The FDA also has substantial discretion in the medical device clearance process or approval process. Despite the time and expense exerted, failure can occur at any stage, and we could encounter problems that cause us to abandon clinical trials or to repeat or perform additional pre-clinical studies and clinical trials. The number of pre-clinical studies and clinical trials that will be required for FDA clearance or approval varies depending on the medical device candidate, the disease or condition that the medical device candidate is designed to address, and the regulations applicable to any particular medical device candidate. The FDA can delay, limit or deny clearance or approval of a medical device candidate for many reasons, including:

Failure to recruit and enroll patients for clinical trials may cause the development of our product candidates to be delayed.

We may encounter delays if we are unable to recruit and enroll and retain enough patients to complete clinical trials. Patient enrollment depends on many factors, including the size of the patient population, the nature of the protocol, the proximity of patients to clinical sites and the eligibility criteria for the trial. Delays in patient enrollment are not unusual. Any such delays in planned patient enrollment may result in increased costs, which could harm our ability to develop products.

25

Table of Contents

Independent clinical investigators and contract research organizations that we engage to conduct our clinical trials may not be diligent, careful or timely.

We will depend on independent clinical investigators to conduct our clinical trials. Contract research organizations may also assist us in the collection and analysis of data. These investigators and contract research organizations will not be our employees and we will not be able to control, other than by contract, the amount of resources, including time that they devote to our trials. If independent investigators fail to devote sufficient resources to the clinical trials, or if their performance is substandard, it will delay the approval or clearance and commercialization of any products that we develop. Further, the FDA requires that we comply with standards, commonly referred to as good clinical practice, for conducting, recording and reporting clinical trials to assure that data and reported results are credible and accurate and that the rights, integrity and confidentiality of trial subjects are protected. If our independent clinical investigators and contract research organizations fail to comply with good clinical practice, the results of our clinical trials could be called into question and the clinical development of our product candidates could be delayed. Failure of clinical investigators or contract research organizations to meet their obligations to us or comply with federal regulations could adversely affect the clinical development of our product candidates and harm our business.

Even if we obtain regulatory clearances or approvals for our product candidates, the terms thereof and ongoing regulation of our products may limit how we manufacture and market our products and product candidates, which could materially impair our ability to generate anticipated revenues.

Once regulatory clearance or approval has been granted, the cleared or approved product and its manufacturer are subject to continual review. Any cleared or approved product may only be promoted for its indicated uses. In addition, if the FDA or other non-U.S. regulatory authorities clear or approve any of our product candidates, the labeling, packaging, adverse event reporting, storage, advertising and promotion for the product will be subject to extensive regulatory requirements. We and the manufacturers of our products are also required to comply with the FDA’s QSR, which include requirements relating to quality control and quality assurance, as well as the corresponding maintenance of records and documentation. Moreover, device manufacturers are required to report adverse events by filing Medical Device Reports with the FDA, which are publicly available. Further, regulatory agencies must approve our manufacturing facilities before they can be used to manufacture our products, and these facilities are subject to ongoing regulatory inspection. If we fail to comply with the regulatory requirements of the FDA, either before or after clearance or approval, or other non-U.S. regulatory authorities, or if previously unknown problems with our products, manufacturers or manufacturing processes are discovered, we could be subject to administrative or judicially imposed sanctions, including:

26

Table of Contents

In addition, the FDA and other non-U.S. regulatory authorities may change their policies and additional regulations may be enacted that could prevent or delay regulatory clearance or approval of our product candidates. We cannot predict the likelihood, nature or extent of government regulation that may arise from future legislation or administrative action, either in the United States or abroad. If we are not able to maintain regulatory compliance, we would likely not be permitted to market our future product candidates and we may not achieve or sustain profitability.

Even if we receive regulatory clearance or approval to market our product candidates, the market may not be receptive to our products, or third-party payors, including government payors, may not provide coverage for our products or for procedures using our products, which could undermine our financial viability.

Even if our product candidates obtain regulatory clearance or approval, resulting products may not gain market acceptance among physicians, patients, health care payors and/or the medical community. We believe that the degree of market acceptance will depend on a number of factors, including:

If our product candidates fail to achieve market acceptance, we may not be able to generate significant revenue or achieve or sustain profitability.

The coverage and reimbursement status of newly cleared or approved medical devices is uncertain, and failure to obtain adequate coverage and adequate reimbursement could limit our ability to market any future product candidates we may develop and decrease our ability to generate revenue from any of our existing and future product candidates that may be cleared or approved.

There is significant uncertainty related to the third-party coverage and reimbursement of newly cleared or approved medical devices. Normally, surgical devices are not directly covered; instead, the procedure using the device is subject to a coverage determination by the insurer. The commercial success of our existing and future product candidates in both domestic and international markets will depend in part on the availability of coverage and adequate reimbursement from third-party payors, including government payors, such as the Medicare and Medicaid programs, managed care organizations and other third-party payors. Government and other third-party payors are increasingly attempting to contain health care costs by limiting both coverage and the level of reimbursement for new products and, as a result, they may not cover or provide adequate payment for our existing and future product candidates. These payors may conclude that our product candidates are not as safe or effective as existing devices or that procedures using our devices are not as safe or effective as the existing procedures using other devices. These payors may also conclude that the overall cost of the procedure using one of our devices exceeds the overall cost of the competing procedure using another type of device, and third-party payors may not approve our product candidates for coverage and adequate reimbursement. The failure to obtain coverage and adequate reimbursement for our existing and future product candidates or health care cost containment initiatives that limit or restrict reimbursement for our existing and future product candidates may reduce any future product revenue.

27

Table of Contents

If we fail to attract and retain key management and scientific personnel, we may be unable to successfully develop or commercialize our product candidates.

We will need to expand and effectively manage our managerial, operational, financial, development, marketing and other resources in order to successfully pursue our research, development and commercialization efforts for our existing and future product candidates. Our success depends on our continued ability to attract, retain and motivate highly qualified management and pre-clinical and clinical personnel. The loss of the services of any of our senior management, particularly Jeffrey G. Spragens and Dr. Charles J. Filipi, could delay or prevent the development or commercialization of our product candidates. We do not maintain “key man” insurance policies on the lives of these individuals or the lives of any of our other employees. We employ these individuals on an at-will basis and their employment can be terminated by us or them at any time, for any reason and with or without notice. We will need to hire additional personnel as we continue to expand our research and development activities and build a sales and marketing organization.

We have scientific, regulatory and clinical advisors who assist us in formulating our research, development and clinical strategies. These advisors are not our employees and may have commitments to, or consulting or advisory contracts with, other entities that may limit their availability to us. In addition, our advisors may have arrangements with other companies to assist those companies in developing products or technologies that may compete with ours.

We may not be able to attract or retain qualified management and scientific personnel in the future due to the intense competition for qualified personnel among medical device and other businesses. If we are not able to attract and retain the necessary personnel to accomplish our business objectives, we may experience constraints that will impede significantly the achievement of our research and development objectives, our ability to raise additional capital and our ability to implement our business strategy. In particular, if we lose any members of our senior management team, we may not be able to find suitable replacements in a timely fashion or at all and our business may be harmed as a result.

As we are evolving from a company primarily involved in development to  a company also involved in commercialization, we may encounter difficulties in managing our growth and expanding our operations successfully.

As we advance our product candidates through research and development and begin commercializing our products, we will need to expand our development, regulatory, manufacturing, marketing and sales capabilities or contract with third parties to provide these capabilities for us. As our operations expand, we expect that we will need to manage additional relationships with such third parties, as well as additional collaborators and suppliers. Maintaining these relationships and managing our future growth will impose significant added responsibilities on members of our management. We must be able to: manage our development efforts effectively; manage our clinical trials effectively; hire, train and integrate additional management, development, administrative and sales and marketing personnel; improve our managerial, development, operational and finance systems; and expand our facilities, all of which may impose a strain on our administrative and operational infrastructure.

Furthermore, we may acquire additional businesses, products or product candidates that complement or augment our existing business. Integrating any newly acquired business or product could be expensive and time-consuming. We may not be able to integrate any acquired business or product successfully or operate any acquired business profitably. Our future financial performance will depend, in part, on our ability to manage any future growth effectively and our ability to integrate any acquired businesses. We may not be able to accomplish these tasks, and our failure to accomplish any of them could prevent us from successfully growing our company.

If we fail to acquire and develop other products or product candidates at all or on commercially reasonable terms, we may be unable to diversify or grow our business.

We intend to continue to utilize in-licensing as a source of products and product candidates for development and commercialization. The success of this strategy depends upon our ability to identify, select and acquire medical device product candidates. Proposing, negotiating and implementing an economically viable product acquisition or license is a lengthy and complex process. We compete for partnering arrangements and license agreements with other medical device companies and academic research institutions. Our competitors may have stronger relationships with third parties with whom we are interested in collaborating and/or may have more established histories of developing and commercializing products. As a result, our competitors may have a competitive advantage in entering into partnering arrangements with such third parties. In addition, even if we find promising product candidates, and generate interest in a partnering or strategic arrangement to acquire such product candidates, we may not be able to acquire rights to additional product candidates or approved products on commercially reasonable terms that we find acceptable, or at all.

28

Table of Contents

We expect that any product candidate to which we acquire rights will require additional development efforts prior to commercial sale, including extensive clinical testing and clearance or approval by the FDA and other non-U.S. regulatory authorities. All product candidates are subject to the risks of failure inherent in medical device product development, including the possibility that the product candidate will not be shown to be sufficiently safe and effective for approval by regulatory authorities. Even if the product candidates are cleared or approved, we cannot be sure that they would be capable of economically feasible production or commercial success.

Because our manufacturing capabilities are limited, we will rely on third parties to manufacture and supply substantially all of our product candidates, and an inability to find additional or alternate sources for our products could materially and adversely affect our financial condition and results of operations.

We currently operate a manufacturing facility for the commercial production of the AMID Stapler^®. In the future, we may choose to use a third party manufacturer for the AMID Stapler^® as well as our other products and product candidates. Currently, a significant number of our AMID Stapler^® component parts come from third-party suppliers. If these manufacturing partners are unable to produce our products or component parts in the amounts that we require, we may not be able to establish a contract and obtain a sufficient alternative supply from another supplier on a timely basis and in the quantities we require.

Our product candidates require precise, high quality manufacturing. We and our contract manufacturers will be subject to ongoing periodic unannounced inspection by the FDA and non-U.S. regulatory authorities to ensure strict compliance with QSR, cGMP and other applicable government regulations and corresponding standards. If we or our contract manufacturers fail to achieve and maintain high manufacturing standards in compliance with QSR, we may experience manufacturing errors resulting in patient injury or death, product recalls or withdrawals, delays or interruptions of production or failures in product testing or delivery, delay or prevention of filing or approval of marketing applications for our products, cost overruns or other problems that could seriously harm our business.

Any performance failure by us or on the part of our contract manufacturers could delay clinical development or regulatory clearance or approval of our product candidates or commercialization of our products and future products, depriving us of potential product revenue and resulting in additional losses. In addition, our dependence on a third party for manufacturing may adversely affect our future profit margins. Our ability to replace an existing manufacturer may be difficult because the number of potential manufacturers is limited and the FDA must approve any replacement manufacturer before it can begin manufacturing our products. Such approval may require additional non-clinical testing and compliance inspections. It may be difficult or impossible for us to identify and engage a replacement manufacturer on acceptable terms in a timely manner, or at all.

We currently have a limited sales, marketing and distribution organization. If we are unable to develop our sales, marketing and distribution capability on our own or through collaborations with marketing partners, we will not be successful in commercializing our product candidates.

We currently have limited marketing, sales and distribution capabilities. We intend to establish our sales and marketing organization with technical expertise and supporting distribution capabilities to commercialize our products and product candidates, which will be expensive and time-consuming. Any failure or delay in the development of our internal sales, marketing and distribution capabilities would adversely impact the commercialization of these products. We intend to distribute our products, including our AMID Stapler^®, through our own sales and marketing organization and through independent contractor and distribution agreements with companies possessing established sales and marketing operations in the medical device industry, but there can be no assurance that we will successfully be able to build a sales and marketing infrastructure or be able to enter into

29

Table of Contents

independent contractor and distribution agreements on terms acceptable to us or at all. To the extent that we enter into co-promotion or other licensing arrangements, our product revenue is likely to be lower than if we directly marketed or sold our products. In addition, any revenue we receive will depend in whole or in part upon the efforts of such third parties, which may not be successful and are generally not within our control. If we are unable to enter into such arrangements on acceptable terms or at all, we may not be able to successfully commercialize our products and product candidates. If we are not successful in commercializing our existing and future products, either on our own or through collaborations with one or more third parties, our future product revenue will suffer and we may incur significant additional losses.

The success of our business may be dependent on the actions of our collaborative partners.

An element of our strategy may be to enter into collaborative arrangements with established multinational medical device companies which will finance or otherwise assist in the development, manufacture and marketing of products incorporating our technology. We anticipate deriving some revenues from research and development fees, license fees, milestone payments and royalties from collaborative partners. Our prospects, therefore, may depend to some extent upon our ability to attract and retain collaborative partners and to develop technologies and products that meet the requirements of prospective collaborative partners. In addition, our collaborative partners may have the right to abandon research projects and terminate applicable agreements, including funding obligations, prior to or upon the expiration of the agreed-upon research terms. There can be no assurance that we will be successful in establishing collaborative arrangements on acceptable terms or at all, that collaborative partners will not terminate funding before completion of projects, that our collaborative arrangements will result in successful product commercialization or that we will derive any revenues from such arrangements. To the extent that we are not able to develop and maintain collaborative arrangements, we would need substantial additional capital to undertake research, development and commercialization activities on our own.

We rely heavily on licenses from third parties, particularly our license with Creighton, and any loss of our rights under such license agreements could materially adversely affect our business prospects.

Most of the patent applications in our patent portfolio are not owned by us, but are licensed from Creighton and other third parties. Presently, we rely primarily on licensed technology for our products and may license additional technology from other third parties in the future. Such license agreements give us rights for the commercial exploitation of the patents resulting from the patent applications, subject to certain provisions of the license agreements. Failure to comply with these provisions could result in the loss of our rights under these license agreements. Our inability to rely on these patent applications which are the basis of our technology would have a material adverse effect on our business.

Most of our patent rights are licensed to us from Creighton. If we or Creighton University do not properly maintain or enforce the patent applications underlying this license, or if we lose our rights under this license, our competitive position, business prospects and results of operations will be materially adversely affected.

Our success will depend in part on the ability of us or Creighton University to obtain, maintain and enforce patent protection for our licensed intellectual property and, in particular, those patents to which we have secured exclusive rights. We or Creighton University may not successfully prosecute the patent applications which are licensed to us. Even if patents issue in respect of these patent applications, we or Creighton University may fail to maintain these patents, may determine not to pursue litigation against other companies that are infringing these patents, or may pursue such litigation less aggressively than necessary to obtain an acceptable outcome from any such litigation. Without protection for the intellectual property we have licensed, other companies might be able to offer substantially identical products for sale, which could materially adversely affect our competitive business position, business prospects and results of operations.

30

Table of Contents

If we or our licensors are unable to obtain and enforce patent protection for our products and product candidates, our business could be materially harmed.

Our success depends, in part, on our ability to protect proprietary methods and technologies that we develop or license under the patent and other intellectual property laws of the United States and other countries, so that we can prevent others from unlawfully using our inventions and proprietary information. However, we may not hold proprietary rights to some patents required for us to commercialize our proposed products. Although numerous patent applications are in process, we presently do not hold any issued U.S. patents, and to our knowledge none of the technology we license has been patented in the U.S. Because certain U.S. patent applications are confidential until patents issue, such as applications filed prior to November 29, 2000, or applications filed after such date which will not be filed in foreign countries, third parties may have filed patent applications for technology covered by our pending patent applications without our being aware of those applications, and our patent applications may not have priority over those applications. For this and other reasons, we or our third-party collaborators may be unable to secure desired patent rights, thereby losing desired exclusivity. If licenses are not available to us on acceptable terms, we will not be able to market the affected products or conduct the desired activities, unless we challenge the validity, enforceability or infringement of the third party patent or otherwise circumvent the third party patent.

Our strategy depends on our ability to rapidly identify and seek patent protection for our discoveries. In addition, we will rely on third-party collaborators to file patent applications relating to proprietary technology that we develop jointly during certain collaborations. The process of obtaining patent protection is expensive and time-consuming. If our present or future collaborators fail to file and prosecute all necessary and desirable patent applications at a reasonable cost and in a timely manner, our business will be adversely affected. Despite our efforts and the efforts of our collaborators to protect our proprietary rights, unauthorized parties may be able to develop and use information that we regard as proprietary.

The issuance of a patent provides a presumption, but does not guarantee that it is valid. Any patents we have obtained, or obtain in the future, may be challenged or potentially circumvented. Moreover, the United States Patent and Trademark Office (the “USPTO”) may commence interference proceedings involving our patents or patent applications. Any such challenge to our patents or patent applications would be costly, would require significant time and attention of our management and could have a material adverse effect on our business. In addition, future court decisions may introduce uncertainty in the enforceability or scope of any patent, including those owned by medical device companies.

Our pending patent applications may not result in issued patents. The patent position of medical device companies, including ours, is generally uncertain and involves complex legal and factual considerations. The standards that the USPTO and its foreign counterparts use to grant patents are not always applied predictably or uniformly and can change. There is also no uniform, worldwide policy regarding the subject matter and scope of claims granted or allowable in medical device patents. Accordingly, we do not know the degree of future protection for our proprietary rights or the breadth of claims that will be allowed in any patents issued to us or to others. The legal systems of certain countries do not favor the aggressive enforcement of patents, and the laws of foreign countries may not protect our rights to the same extent as the laws of the United States. Therefore, the enforceability or scope of our owned or licensed patents in the United States or in foreign countries cannot be predicted with certainty, and, as a result, any patents that we own or license may not provide sufficient protection against competitors. We may not be able to obtain or maintain patent protection for our pending patent applications, those we may file in the future, or those we may license from third parties, including Creighton University.

We cannot assure you that any patents that will issue, that may issue or that may be licensed to us will be enforceable or valid or will not expire prior to the commercialization of our product candidates, thus allowing others to more effectively compete with us. Therefore, any patents that we own or license may not adequately protect our product candidates or our future products.

If we or our licensors are unable to protect the confidentiality of our proprietary information and know-how, the value of our technology and products could be adversely affected.

In addition to patent protection, we also rely on other proprietary rights, including protection of trade secrets, know-how and confidential and proprietary information. To maintain the confidentiality of trade secrets and proprietary information, we will seek to enter into confidentiality agreements with our employees, consultants and collaborators upon the commencement of their relationships with us. These agreements generally require that all confidential information developed by the individual or made known to the individual by us during the course of the individual’s relationship with us be kept confidential and not disclosed to third parties. Our agreements with employees also generally provide and will generally provide that any inventions conceived by the individual in the

31

Table of Contents

course of rendering services to us shall be our exclusive property. However, we may not obtain these agreements in all circumstances, and individuals with whom we have these agreements may not comply with their terms. In the event of unauthorized use or disclosure of our trade secrets or proprietary information, these agreements, even if obtained, may not provide meaningful protection, particularly for our trade secrets or other confidential information. To the extent that our employees, consultants or contractors use technology or know-how owned by third parties in their work for us, disputes may arise between us and those third parties as to the rights in related inventions.

Adequate remedies may not exist in the event of unauthorized use or disclosure of our confidential information. The disclosure of our trade secrets would impair our competitive position and may materially harm our business, financial condition and results of operations.

Some jurisdictions may require us or our licensors to grant licenses to third parties. Such compulsory licenses could be extended to include some of our product candidates, which may limit our potential revenue opportunities.

Many countries, including certain countries in Europe, have compulsory licensing laws under which a patent owner may be compelled to grant licenses to third parties. In addition, most countries limit the enforceability of patents against government agencies or government contractors. In these countries, the patent owner may be limited to monetary relief and may be unable to enjoin infringement, which could materially diminish the value of the patent. Compulsory licensing of life-saving products is also becoming increasingly popular in developing countries, either through direct legislation or international initiatives. Such compulsory licenses could be extended to include some of our product candidates, which may limit our potential revenue opportunities.

Our commercial success depends significantly on our ability to operate without infringing the patents and other proprietary rights of third parties.

Other entities may have or obtain patents or proprietary rights that could limit our ability to manufacture, use, sell, offer for sale or import products or impair our competitive position. In addition, to the extent that a third party develops new technology that covers our products, we may be required to obtain licenses to that technology, which licenses may not be available or may not be available on commercially reasonable terms, if at all. If licenses are not available to us on acceptable terms, we will not be able to market the affected products or conduct the desired activities, unless we challenge the validity, enforceability or infringement of the third party patent or circumvent the third party patent, which would be costly and would require significant time and attention of our management. Third parties may have or obtain valid and enforceable patents or proprietary rights that could block us from developing products using our technology. Our failure to obtain a license to any technology that we require may materially harm our business, financial condition and results of operations.

If we become involved in patent litigation or other proceedings related to a determination of rights, we could incur substantial costs and expenses, substantial liability for damages or be required to stop our product development and commercialization efforts, any of which could materially adversely affect our liquidity, business prospects and results of operations.

Third parties may sue us for infringing their patent rights. Likewise, we may need to resort to litigation to enforce a patent issued or licensed to us or to determine the scope and validity of proprietary rights of others. In addition, a third party may claim that we have improperly obtained or used its confidential or proprietary information. Furthermore, in connection with our third-party license agreements, we generally have agreed to indemnify the licensor for costs incurred in connection with litigation relating to intellectual property rights. The cost to us of any litigation or other proceeding relating to intellectual property rights, even if resolved in our favor, could be substantial, and the litigation would divert our management’s efforts. Some of our competitors may be able to sustain the costs of complex patent litigation more effectively than we can because they have substantially greater resources. Uncertainties resulting from the initiation and continuation of any litigation could limit our ability to continue our operations.

32

Table of Contents

If any parties successfully claim that our creation or use of proprietary technologies infringes upon their intellectual property rights, we might be forced to pay damages, potentially including treble damages, if we are found to have willfully infringed on such parties’ patent rights. In addition to any damages we might have to pay, a court could require us to stop the infringing activity or obtain a license. Any license required under any patent may not be made available on commercially acceptable terms, if at all. In addition, such licenses are likely to be non-exclusive and, therefore, our competitors may have access to the same technology licensed to us. If we fail to obtain a required license and are unable to design around a patent, we may be unable to effectively market some of our technology and products, which could limit our ability to generate revenues or achieve profitability and possibly prevent us from generating revenue sufficient to sustain our operations.

Medicare legislation and future legislative or regulatory reform of the health care system may affect our ability to sell our products profitably.

In the United States, there have been a number of legislative and regulatory proposals, at both the federal and state government levels, to change the healthcare system in ways that could affect our ability to sell our products profitably, if approved. To the extent that our products are deemed to be durable medical equipment (“DME”), they may be subject to distribution under Medicare’s Competitive Acquisition regulations, which could adversely affect the amount that we can seek from payors. Non-DME devices used in surgical procedures are normally paid directly by the hospital or health care provider and not reimbursed separately by third-party payors. As a result, these types of devices are subject to intense price competition that can place a small manufacturer at a competitive disadvantage.

We are unable to predict what additional legislation or regulation, if any, relating to the health care industry or third-party coverage and reimbursement may be enacted in the future or what effect such legislation or regulation would have on our business. Any cost containment measures or other health care system reforms that are adopted could have a material adverse effect on our ability to commercialize our existing and future product candidates successfully.

Failure to obtain regulatory approval outside the United States will prevent us from marketing our product candidates abroad.

We intend to market certain of our products and product candidates in non-U.S. markets. In order to market our existing and future products in the European Union and many other non-U.S. jurisdictions, we must obtain separate regulatory approvals. We have had limited interactions with non-U.S. regulatory authorities, the approval procedures vary among countries and can involve additional testing, and the time required to obtain approval may differ from that required to obtain FDA approval. Approval or clearance by the FDA does not ensure approval by regulatory authorities in other countries, and approval by one or more non-U.S. regulatory authorities does not ensure approval by regulatory authorities in other countries or by the FDA. The non-U.S. regulatory approval process may include all of the risks associated with obtaining FDA approval or clearance. We may not obtain non-U.S. regulatory approvals on a timely basis, if at all. We may not be able to file for non-U.S. regulatory approvals and may not receive necessary approvals to commercialize our existing and future product candidates in any market.

Non-U.S. governments often impose strict price controls, which may adversely affect our future profitability.

We intend to seek approval to market certain of our existing and future products in both the U.S. and in non-U.S. jurisdictions. If we obtain approval in one or more non-U.S. jurisdictions, we will be subject to rules and regulations in those jurisdictions relating to our products. In some countries, particularly countries of the European Union, each of which has developed its own rules and regulations, pricing is subject to governmental control. In these countries, pricing negotiations with governmental authorities can take considerable time after the receipt of marketing approval for a medical device candidate. To obtain reimbursement or pricing approval in some countries, we may be required to conduct a clinical trial that compares the cost-effectiveness of our existing and future product candidates to other available products. If reimbursement of our future product candidates is unavailable or limited in scope or amount, or if pricing is set at unsatisfactory levels, we may be unable to achieve or sustain profitability.

33

Table of Contents

Our business may become subject to economic, political, regulatory and other risks associated with domestic and international operations.

Our business is subject to risks associated with conducting business domestically and internationally, in part due to some of our suppliers being located outside the U.S. Accordingly, our future results could be harmed by a variety of factors, including:

Risks Related to Our Common Stock

The market price of our common stock has been, and may continue to be, highly volatile, and such volatility could cause the market price of our common stock to decrease and could cause you to lose some or all of your investment in our common stock.

For the two years ended December 31, 2011, the market price of our common stock has fluctuated from a high of $2.20 per share to a low of $0.45 per share. The market price of our common stock may continue to fluctuate significantly in response to numerous factors, some of which are beyond our control, such as:

Further, the stock market in general, and the market for medical device companies in particular, has recently experienced extreme price and volume fluctuations. The volatility of our common stock is further exacerbated due to its low trading volume. Continued market fluctuations could result in extreme volatility in the price of our common stock, which could cause a decline in the value of our common stock and the loss of some or all of your investment.

34

Table of Contents

Some or all of the “restricted” shares of our common stock held by our stockholders, including, but not limited to, shares issued in connection with (i) our acquisition of SafeStitch LLC, (ii) our 2008, 2010 and 2012 private placements and (iii) the 2010 conversion into common stock of all outstanding shares of our preferred stock, may be offered from time to time in the open market pursuant to an effective registration statement under the Securities Act of 1933, as amended, or without registration pursuant to Rule 144 promulgated thereunder, and these sales may have a depressive effect on the market price of our common stock.

Trading of our common stock is limited, and trading restrictions imposed on us by applicable regulations may further reduce trading in our common stock, making it difficult for our stockholders to sell their shares; and future sales of common stock could reduce our stock price.

Trading of our common stock is currently conducted on the OTCBB. The liquidity of our common stock is limited, not only in terms of the number of shares that can be bought and sold at a given price, but also as it may be adversely affected by delays in the timing of transactions and reduction in security analysts’ and the media’s coverage of us, if at all. As of December 21, 2011, approximately 62% of the issued and outstanding shares of our common stock are held by officers, directors and beneficial owners of at least 10% of our outstanding shares, each of whom is subject to certain restrictions with regard to trading our common stock.

These factors may result in different prices for our common stock than might otherwise be obtained in a more liquid market and could also result in a larger spread between the bid and asked prices for our common stock. In addition, without a large public float, our common stock is less liquid than the stock of companies with broader public ownership, and, as a result, the trading prices of our common stock may be more volatile. In the absence of an active public trading market, an investor may be unable to liquidate his investment in our common stock. Trading of a relatively small volume of our common stock may have a greater impact on the trading price of our stock than would be the case if our public float were larger. We cannot predict the prices at which our common stock will trade in the future, if at all.

Sales by stockholders of substantial amounts of our shares of common stock, the issuance of new shares of common stock by us or the perception that these sales may occur in the future could materially and adversely affect the market price of our common stock, and you may lose all or a portion of your investment in our common stock.

Because our common stock may be a “penny stock,” it may be more difficult for investors to sell shares of our common stock, and the market price of our common stock may be adversely affected.

Our common stock may be a “penny stock” if, among other things, the stock price is below $5.00 per share, it is not listed on a national securities exchange or approved for quotation on the Nasdaq Stock Market or any other national stock exchange or it has not met certain net tangible asset or average revenue requirements. Broker-dealers who sell penny stocks must provide purchasers of these stocks with a standardized risk-disclosure document prepared by the SEC. This risk-disclosure document provides information about penny stocks and the nature and level of risks involved in investing in the penny-stock market. A broker must also give a purchaser, orally or in writing, bid and offer quotations and information regarding broker and salesperson compensation, make a written determination that the penny stock is a suitable investment for the purchaser and obtain the purchaser’s written agreement to the purchase. Broker-dealers must also provide customers that hold penny stock in their accounts with such broker-dealer a monthly statement containing price and market information relating to the penny stock. If a penny stock is sold to an investor in violation of the penny stock rules, the investor may be able to cancel its purchase and get its money back.

If applicable, the penny stock rules may make it difficult for investors to sell their shares of our common stock. Because of the rules and restrictions applicable to a penny stock, there is less trading in penny stocks and the market price of our common stock may be adversely affected. Also, many brokers choose not to participate in penny stock transactions. Accordingly, investors may not always be able to resell their shares of our common stock publicly at times and prices that they feel are appropriate.

35

Table of Contents

Directors, executive officers, principal stockholders and affiliated entities own a significant percentage of our capital stock, and they may make decisions that you do not consider to be in the best interests of our stockholders.

Our directors, executive officers, principal stockholders and affiliated entities beneficially own, in the aggregate, over 62% of our outstanding voting securities as of December 21, 2011. As a result, if some or all of them acted together, they would have the ability to exert substantial influence over the election of our board of directors and the outcome of issues requiring approval by our stockholders. This concentration of ownership may also have the effect of delaying or preventing a change in control of our company that may be favored by other stockholders. This could prevent transactions in which stockholders might otherwise recover a premium for their shares over current market prices.

Compliance with changing regulations concerning corporate governance and public disclosure may result in additional expenses.

There have been changing laws, regulations and standards relating to corporate governance and public disclosure, including the Sarbanes-Oxley Act, new regulations promulgated by the SEC and rules promulgated by the national securities exchanges. These new or changed laws, regulations and standards are subject to varying interpretations in many cases due to their lack of specificity, and, as a result, their application in practice may evolve over time as new guidance is provided by regulatory and governing bodies, which could result in continuing uncertainty regarding compliance matters and higher costs necessitated by ongoing revisions to disclosure and governance practices. As a result, our efforts to comply with evolving laws, regulations and standards are likely to continue to result in increased general and administrative expenses and a diversion of management time and attention from revenue-generating activities to compliance activities. Our board of directors, Chief Executive Officer and Chief Financial Officer could face an increased risk of personal liability in connection with the performance of their duties. As a result, we may have difficulty attracting and retaining qualified board members and executive officers, which could harm our business. If our efforts to comply with new or changed laws, regulations and standards differ from the activities intended by regulatory or governing bodies, we could be subject to liability under applicable laws or our reputation may be harmed.

Our principal corporate office and manufacturing facility is located at 4400 Biscayne Blvd., Miami, Florida. We rent this space from Frost Real Estate Holdings, LLC, which is a company controlled by Dr. Phillip Frost, our largest beneficial stockholder. We lease approximately 6,800 square feet under the lease agreement, which is for a five-year term that began on January 1, 2008.

Additionally, we lease approximately 462 square feet of office space in Omaha, Nebraska. This facility includes one administrative office used by Dr. Filipi, who is based in Omaha, Nebraska and is our Chief Medical Officer and one of the members of our Board of Directors. We also lease approximately 1,200 square feet of warehouse space in Miami, Florida which is used as our prototype lab.

None.

Not Applicable.

36

Table of Contents

PART II

Our common stock is quoted on the OTCBB under the symbol “SFES.” During the period from February 22, 2011 to August 25, 2011, our common stock was quoted on the OTCQB under the symbol “SFES.” The table below sets forth, for the respective periods indicated, the high and low bid prices for our common stock in the over-the-counter market as reported on the OTCQB or the OTCBB, as applicable. The bid prices represent inter-dealer transactions, without adjustments for retail mark-ups, mark-downs or commissions and may not necessarily represent actual transactions.

As of March 28, 2012, there were approximately 208 record holders of our common stock.

We paid no dividends or made any other distributions in respect of our common stock during our fiscal years ended December 31, 2011 and 2010, and we have no plans to pay any dividends or make any other distributions in the future.

In connection with our acquisition of SafeStitch LLC, we entered into a Note and Security Agreement with Jeffrey G. Spragens, our Chief Executive Officer and President and a director, and The Frost Group, LLC, a Florida limited liability company whose members include Frost Gamma Investments Trust, a trust indirectly controlled by Dr. Phillip Frost, the largest beneficial holder of our common stock, as well as Dr. Jane H. Hsiao and Steven D. Rubin, two of our directors, which provides for up to $4.0 million in total available borrowings. Under this credit facility, we may distribute stock dividends in respect of our common stock, but we may not pay cash dividends in respect of our common stock.

As a smaller reporting company as defined in Rule 12b-2 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), we are not required to include information otherwise required by this item.

37

Table of Contents

This Annual Report on Form 10-K contains certain forward-looking statements about our expectations, beliefs or intentions regarding our product development and commercialization efforts, business, financial condition, results of operations, strategies or prospects. You can identify forward-looking statements by the fact that these statements do not relate strictly to historical or current matters. Rather, forward-looking statements relate to anticipated or expected events, activities, trends or results as of the date they are made. Because forward-looking statements relate to matters that have not yet occurred, these statements are inherently subject to risks and uncertainties that could cause our actual results to differ materially from any future results expressed or implied by the forward-looking statements. Many factors could cause our actual activities or results to differ materially from the activities and results anticipated in forward-looking statements. These factors include those set forth below as well as those contained in “Item 1A—Risk Factors” of this Annual Report on Form 10-K and our other filings with the SEC. We do not undertake any obligation to update forward-looking statements, except as required by applicable law. These forward-looking statements are only predictions and reflect our views as of the date they are made with respect to future events and financial performance.

Overview

We are a developmental stage, FDA-registered medical device company focused on the development of medical devices that manipulate tissues for the treatment of obesity, GERD, hernia formation, esophageal obstructions, Barrett’s Esophagus, upper gastrointestinal bleeding, and other intraperitoneal abnormalities through endoscopic and minimally invasive surgery.

We have utilized our expertise in intraperitoneal surgery to test certain of our devices in in vivo and ex vivo animal trials and ex vivo human trials, and with certain products, in limited in vivo human trials. Certain of our products did not or may not require clinical trials, including our AMID Stapler^®, SMART Dilator^TM, and standard and airway bite blocks. Where required, we intend to rapidly, efficiently and safely move into clinical trials for certain other devices, including those utilized in surgery for the treatment of obesity, GERD and for the treatment and diagnosis of Barrett’s Esophagus. Preliminary clinical trials for our gastroplasty product candidates began in the third quarter of 2010 and are expected to continue in the second half of 2012. Sales of our AMID Stapler^® are anticipated to begin in the second quarter of 2012.

Critical Accounting Policies and Estimates

Our discussion and analysis of our financial condition and results of operations are based upon our audited consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities and expenses, and related disclosure of contingent assets and liabilities. On an on-going basis, we evaluate our estimates, including those related to investments, property and equipment, intangible assets, contingencies and litigation. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. A more detailed discussion on the application of these and other accounting policies can be found in Note 2 in the Notes to the Consolidated Financial Statements set forth in Item 8 of this Annual Report on Form 10-K. Actual results may differ from these estimates under different assumptions or conditions.

Results of Operations

Our net loss totaled $22.8 million for the period from September 15, 2005 (inception) through December 31, 2011. Such loss included $5.7 million and $5.3 million for the years ended December 31, 2011 and 2010, respectively. We do not currently generate revenues from any of our products, including those already cleared for commercial marketing by the FDA. While we anticipate generating revenue in 2012, we expect to continue to generate net losses in connection with the commercial launch of such FDA-cleared products and the continual development of our other products and technologies. Our research and development activities are budgeted to expand over time and will require further resources if we are to be successful. As a result, we believe we will likely continue to incur net losses for the near future.

38

Table of Contents

Year Ended December 31, 2011 Compared to Year Ended December 31, 2010

Research and Development (“R&D”) costs and expenses were $3.4 million for the year ended December 31, 2011, as compared to $2.7 million for the year ended December 31, 2010. This $0.7 million increase resulted primarily from the addition of R&D and manufacturing staff and increased expenditures for contract engineering services, pre-clinical testing, research equipment, controlled environment infrastructure, the manufacturing of devices and components to be used in clinical trials of our gastroplasty device, and costs associated with the redesign and testing of the AMID Stapler^®.

Selling, General and Administrative (“SG&A”) costs and expenses were $2.3 million for the year ended December 31, 2011 as compared to $2.6 million for the year ended December 31, 2010. This $0.3 million decrease is primarily related to a decrease in stock-based compensation expense due to a change in the forfeitures experience, professional and legal fees, sales and accounting payroll costs, advertising fees, travel and trade show expenses related to the initial commercialization of the AMID Stapler^®. These decreases were offset in part by increases in payroll costs from the addition of quality, regulation and engineering personnel, obsolete inventory disposals, increased rent and other costs associated with our efforts to develop a more reliable manufacturing process. SG&A costs and expenses consist primarily of salaries and other related costs, including stock-based compensation expense. Other SG&A costs and expenses include facility-related costs not otherwise included in R&D costs and expenses, and professional fees for legal and accounting services. We expect that our SG&A costs and expenses will increase in 2012 in connection with our intended commercialization activities for the AMID Stapler^® beginning in the second quarter of 2012.

Other income totaled $0 and $0.2 million for the years ended December 31, 2011 and 2010, respectively. This $0.2 million decrease resulted from the awarding of a tax grant in 2010 under the U.S. Government’s Qualifying Therapeutic Discovery Project (QTDP) program for research related to development of the AMID Stapler^® and the related Simplified Stapled Lichtenstein Procedure (SSLP™) for hernia repair. The QTDP program was created by Congress on May 21, 2010 under Section 48D of the Internal Revenue Code, as enacted under the Patient Protection and Affordable Care Act. The QTDP program provides support for innovative projects that are determined by the U.S. Department of Health and Human Services to have reasonable potential to result in a new therapy, reduce health care costs, or significantly advance the goal of curing cancer. The grant was received in 2010 and was not taxable income for federal tax purposes.

Interest income was negligible for the years ended December 31, 2011 and 2010. Interest expense totaled $48,000 for the year ended December 31, 2011, as compared to $0 for the year ended December 31, 2010. The 2011 interest expense was due to outstanding balances under our credit facility.

Liquidity and Capital Resources

As a result of our significant R&D expenditures and the lack of any product sales revenue, we have generated operating losses since inception. We do not expect to have any source of revenues before the second quarter of 2012 at the earliest, and we expect to incur losses from operations for the foreseeable future. We expect to incur increasing R&D costs and expenses, including expenses related to hiring new personnel and conducting clinical trials. We expect that SG&A costs and expenses will also increase as we expand our regulatory compliance and administrative staff and add sales and marketing personnel and infrastructure.

To date, we have funded our operations primarily with proceeds from private placement of common and preferred stock and our $4.0 million credit facility. Our ability to sell additional shares of our stock and/or borrow cash under existing or new credit facilities could be materially adversely affected by, among other things, any economic turmoil in the world’s equity and credit markets. There can therefore be no assurance that we will be able to raise funds on acceptable terms or at all, which may materially adversely affect our ability to continue our operations. Additionally, uncertain economic conditions could reduce the demand for new and innovative medical devices, resulting in delayed market acceptance of our product candidates. Such delay could have a material adverse impact on our expected cash flows, liquidity, results of operations and financial position.

On February 17, 2012, we sold 20,794,000 shares of our common stock in a private placement at a price of $0.40 per share, with net proceeds to the Company of $8.3 million. Approximately 54% of the shares offered were purchased by our officers, directors and significant shareholders. A portion of the proceeds was used to pay off all amounts outstanding under the credit facility.

39

Table of Contents

We have received FDA clearance to begin marketing the AMID Stapler^® in the United States and we are preparing to commence clinical trials of our Gastroplasty Device. We expect to begin commercial sales of the AMID Stapler^® in the second quarter of 2012. Commencing such commercialization and clinical trial activities is anticipated to significantly increase our cash requirements for 2012 and into the foreseeable future. Our management believes that the $8.3 million in proceeds received by the Company from the sale of the 20,794,000 shares of common stock in February 2012, together with the availability under our existing line of credit, which matures in June 2013, is sufficient to fund our current cash flow requirements through December 31, 2012. However, in order to fund all planned operations, including the commercialization of certain of our products and the anticipated expansion of clinical trials for certain of our product candidates, we anticipate that additional external financing will be required. We have based this estimate on assumptions that are subject to change and may prove to be wrong, and we may be required to use our available capital resources sooner than we currently expect. Because of the numerous risks and uncertainties associated with the development and commercialization of our product candidates, we are unable to estimate the precise amounts of capital outlays and operating expenditures associated with our current and anticipated commercialization efforts and clinical trials.

Our actual future capital requirements will depend on many factors, including sales of the AMID Stapler^®, the progress and results of our clinical trials, the duration and cost of discovery and preclinical development, and laboratory testing and clinical trials for our product candidates, the timing and outcome of regulatory review of our product candidates, the costs involved in preparing, filing, prosecuting, maintaining, defending and enforcing patent claims and other intellectual property rights, the number and development requirements of other product candidates that we pursue and the costs of commercialization activities, including product marketing, sales and distribution.

We will need to finance our future cash needs through public or private equity offerings, debt financings or corporate collaboration and licensing arrangements. We currently do not have any commitments for future external funding. We may need to raise additional funds more quickly if one or more of our assumptions prove to be incorrect or if we choose to expand our product development efforts more rapidly than we presently anticipate. We may also decide to raise additional funds even before we need them if the conditions for raising capital are favorable. The sale of additional equity or debt securities will likely result in dilution to our shareholders. The incurrence of indebtedness would result in increased fixed obligations and could also result in covenants that would restrict our operations. Additional equity or debt financing, grants or corporate collaboration and licensing arrangements may not be available on acceptable terms, if at all. If adequate funds are not available, we may be required to delay, reduce the scope of or eliminate our R&D programs, reduce our planned commercialization efforts or obtain funds through arrangements with collaborators or others that may require us to relinquish rights to certain product candidates that we might otherwise seek to develop or commercialize independently.

As a smaller reporting company as defined in Rule 12b-2 of the Exchange Act, we are not required to include the information otherwise required by this item.

40

Table of Contents

41

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Stockholders

SafeStitch Medical, Inc.

We have audited the accompanying consolidated balance sheets of SafeStitch Medical, Inc. and subsidiaries (a development stage company) (the “Company”) as of December 31, 2011 and 2010, and the related consolidated statements of operations, stockholders’ equity and cash flows for the years ended December 31, 2011 and 2010 and for the period from September 15, 2005 (inception) through December 31, 2011. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. We were not engaged to perform an audit of the Company’s internal control over financial reporting. Our audits include consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of the Company as of December 31, 2011 and 2010, and the consolidated results of their operations and cash flows for the years ended December 31, 2011 and 2010 and for the period from September 15, 2005 (inception) through December 31, 2011, in conformity with accounting principles generally accepted in the United States of America.

/s/ EisnerAmper LLP

New York, New York

March 29, 2012

42

Table of Contents

SAFESTITCH MEDICAL, INC.

(A Developmental Stage Company)

CONSOLIDATED BALANCE SHEETS

(in 000s, except share data)

The accompanying notes are an integral part of these consolidated financial statements.

43

Table of Contents

SAFESTITCH MEDICAL, INC.

(A Developmental Stage Company)

CONSOLIDATED STATEMENTS OF OPERATIONS

(in 000s, except per share amounts)

The accompanying notes are an integral part of these consolidated financial statements.

44

Table of Contents

SAFESTITCH MEDICAL, INC.

(A Developmental Stage Company)

CONDENSED CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY (DEFICIT)

FOR THE PERIOD SEPTEMBER 15, 2005 (INCEPTION) THROUGH DECEMBER 31, 2011

(in 000s)