ATLAS TECHNICAL CONSULTANTS, INC. - Annual Report: 2020 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2020

OR

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from    to     

Commission file number: 001-38745

ATLAS TECHNICAL CONSULTANTS, INC.

(Exact name of registrant as specified in its charter)

(512) 851-1501

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant’s most recently completed second fiscal quarter was $15,318,477.

As of March 17, 2021, 15,149,671 shares of the registrant’s Class A common stock, par value $0.0001 per share, and 20,130,741 shares of the registrant’s Class B common stock, par value $0.0001 per share, were outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the definitive proxy statement of the registrant for the 2021 Annual Meeting of Stockholders, which will be filed within 120 days of December 31, 2020, are incorporated by reference into Part III of this Annual Report on Form 10-K.

ATLAS TECHNICAL CONSULTANTS, INC.

ANNUAL REPORT ON FORM 10-K

TABLE OF CONTENTS

CAUTIONARY STATEMENT REGARDING FORWARD-LOOKING STATEMENTS

The statements contained in this Annual Report on Form 10-K that are not purely historical are forward-looking statements. Our forward-looking statements include, but are not limited to, statements regarding our or our management team’s expectations, hopes, beliefs, intentions or strategies regarding the future. In addition, any statements that refer to projections, forecasts or other characterizations of future events or circumstances, including any underlying assumptions, are forward-looking statements. The words “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “intend,” “may,” “might,” “plan,” “possible,” “potential,” “predict,” “project,” “should,” “would” and similar expressions may identify forward-looking statements, but the absence of these words does not mean that a statement is not forward-looking.

The forward-looking statements contained in this Annual Report on Form 10-K are based on our current expectations and beliefs concerning future developments and their potential effects on us. When considering forward-looking statements, you should keep in mind the risk factors and other cautionary statements described under the heading “Risk Factors” included elsewhere in this report. There can be no assurance that future developments affecting us will be those that we have anticipated. These forward-looking statements involve a number of risks, uncertainties (some of which are beyond our control) or other assumptions that may cause actual results or performance to be materially different from those expressed or implied by these forward-looking statements. These risks and uncertainties include, but are not limited to:

Should one or more of these risks or uncertainties materialize, they could cause our actual results to differ materially from the forward-looking statements. Forward-looking statements speak only as of the date they were made. We undertake no obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as may be required under applicable securities laws. You should not take any statement regarding past trends or activities as a representation that the trends or activities will continue in the future. Accordingly, you should not put undue reliance on these statements.

This Annual Report on Form 10-K includes market share data, industry data and forecasts that we obtained from internal company surveys (including estimates based on our knowledge and experience in the industry in which we operate), market research, consultant surveys, publicly available information, industry publications and surveys. These sources include, but are not limited to, IBISWorld, FMI, Engineering News Record and the American Society of Civil Engineers. Industry surveys and publications, consultant surveys and forecasts generally state that the information contained therein has been obtained from sources believed to be reliable. Although we believe such information is accurate and reliable, we have not independently verified any of the data from third-party sources cited or used for our management’s industry estimates, nor have we ascertained the underlying economic assumptions relied upon therein. Statements as to our position relative to our competitors or as to markets in which we operate refer to the most recent available data.

Risk Factor Summary

Our business is subject to significant risks and uncertainties of which you should be aware before making an investment decision in our business. Below is a bulleted summary of our principal risk factors, however this list does not fully represent all of our known risk factors. You should take time to carefully review and consider the full discussion of our risk factors (See Item 1A. Risk Factors).

Risks Relating to Our Business and Industry

Risks Related to Our Common Stock

General Risk Factors

PART I

ITEM 1. BUSINESS

Overview

Headquartered in Austin, Texas, Atlas Technical Consultants, Inc. (the “Company”, “we”, or “Atlas” and formerly named Boxwood Merger Corp. (“Boxwood”)) is a leading provider of professional testing, inspection, engineering, environmental, program management and consulting services, offering solutions to public and private sector clients in the transportation, commercial, water, government, education, industrial, healthcare and power markets. Our customers include government agencies (federal, state and local), quasi-public entities, schools, hospitals, utilities and airports, as well as private sector clients across many industries.

With approximately 140 offices located throughout the United States, we provide a broad range of mission-critical technical services, helping our clients test, inspect, plan, design, certify and manage a wide variety of projects across diverse end markets.

We act as a trusted advisor to our clients, helping clients design, engineer, inspect, manage and maintain civil and commercial infrastructure, servicing existing structures as well as helping to build new structures. However, we do not perform any construction and do not take any direct construction risk.

We provide a broad range of mission-critical technical services, ranging from providing inspection services in small projects to managing significant aspects of large, multi-year projects. For the year ended December 31, 2020, we:

We have long-term relationships with a diverse set of clients, providing a base of repeating clients, projects and revenues. Approximately 90% of our revenues were derived from clients that have used our services at least twice in the past three years and more than 95% of our revenues were generated from client relationships longer than ten years, with greater than 25% of revenues generated from relationships longer than thirty years. Examples of such long-term customers include the Georgia and Texas Departments of Transportation, U.S. Postal Service, U.S. Environmental Protection Agency, Gwinnett County Georgia, New York City Housing Authority, Stanford University, Port of Oakland, United Rentals, Inc., Speedway, Walmart Inc., and Apple Inc.

Our services require a high degree of technical expertise, as our clients rely on us to provide testing, inspection and quality assurance services to ensure that structures are designed, engineered, built and maintained in accordance with building codes, regulations and the highest safety standards. As such, our services are delivered by a highly-skilled, technical employee base that includes engineers, inspectors, scientists and other field experts. As of December 31, 2020, our technical staff represented nearly 80% of our approximately 3,200 employees. Our services are typically provided under contracts, some of which are long-term with long lead times between when contracts are signed and when our services are performed. As such, we have a significant amount of contracted backlog, providing for a high degree of visibility with respect to revenues expected to be generated from such backlog. As of December 31, 2020, our contracted backlog was estimated to be approximately $628 million. See “— Backlog” below for additional information relating to our backlog.

For the year ended December 31, 2020, we recognized approximately $468.2 million of gross revenues, ($27.6) million of net (loss) income, and $62.7 million of adjusted EBITDA.

Company History

Since our inception, we have strategically strengthened our capabilities and widened our footprint through organic growth and acquisitions of premier national and large regional technical service companies to create an industry-leading platform. Prior to the consummation of the Atlas Business Combination (as defined in “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Overview”), in 2017, we sequentially acquired three regional market leaders in each of Texas (PAVETEX Engineering LLC), Georgia (Moreland Altobelli Associates, LLC), and California (Consolidated Engineering Laboratories (“CEL”)). These businesses established our core services and capabilities. In 2018, we further augmented our core services and regional leadership through the acquisitions of Piedmont Geotechnical Consultants (Georgia) and SCST, Inc. (California). In January 2019, we acquired ATC Group Services LLC, an environmental and engineering consulting services company with over 1,700 employees across North America. In the year-ended December 31, 2020, we acquired: (i) Long Engineering LLC (“LONG”), a land surveying and engineering company headquartered in Atlanta, Georgia; (ii) Alta Vista Solutions (“Alta Vista”), a key provider of transportation-related testing and inspection services headquartered in Oakland, California; and (iii) WesTest LLC (“WesTest”), a key provider of transportation-related testing and inspection services headquartered in Lakewood, Colorado. Additionally, on February 26, 2021 we entered into a definitive agreement (subject to customary closing conditions) to acquire Atlantic Engineering Laboratories, Inc. and Atlantic Engineering Laboratories of New York, Inc., a full-service materials testing and inspection firm with over 275 employees providing on-site quality control and quality assurance services in New York and New Jersey. As a result of these acquisitions of key providers of technical services, we continue to expand our national platform.

Prior to February 14, 2020, Boxwood was a special purpose acquisition company incorporated in Delaware on June 28, 2017. On February 14, 2020, the Company consummated the Atlas Business Combination pursuant to the Purchase Agreement. Following the consummation of the Atlas Business Combination, the combined company is organized in an “Up-C” structure in which the business of Atlas Intermediate Holdings LLC (“Atlas Intermediate”) and its subsidiaries is held by Atlas TC Holdings LLC (“Holdings”) and will continue to operate through the subsidiaries of Atlas Intermediate, and in which the Company’s only direct assets will consist of Holdings Units. The Company is the sole manager of Holdings in accordance with the terms of the Amended and Restated Limited Liability Company Agreement of Holdings (the “Holdings LLC Agreement”) entered into in connection with the consummation of the Atlas Business Combination.

Our Core Values

We strive to be the most sought-after infrastructure and environmental solutions provider, known for our unique values-driven approach and brought to life by the industry’s most exceptional people.

At Atlas, we apply the following core values in all that we do:

Focus on Sustainability and the Environment

As an infrastructure and environmental solutions provider, we are committed to applying our values help our clients to improve sustainable infrastructure and ensure a safe and healthy environment through the services we provide. We aim to assist our clients in the effective management of their environmental risks, including those related to climate change, while also minimizing our own environmental footprint.

Through our transportation and infrastructure services, we are committed to the continuous evaluation of opportunities and implementation of solutions to maximize energy efficiency, renewable energy and low-carbon technologies. Additionally, we aim to help our clients manage and respond to climate-related impacts through our disaster response and recovery services, while also contributing to community resiliency through our engineering and design services.

Industry Overview

We operate within the broader U.S. infrastructure services market, providing a diversified set of technical services to a variety of end markets. Services include, but are not limited to, testing, inspection and certification, environmental services, engineering and design and program management, construction management and quality management. The relevant addressable market for U.S. infrastructure and construction testing, inspection and certification (“TIC”) and environmental consulting is an estimated $30 billion and growing. Our clients and projects vary in size and scope and come from all sectors including U.S. federal, state, municipal and local governments, quasi-public and private clients from the education, healthcare and utilities industries, and large multinational corporations and others.

Historically, the infrastructure and construction, TIC and environmental consulting industry have exhibited growth corresponding with market tailwinds, including heightened expenditure on public infrastructure, increasing complexity of regulatory requirements, aging transportation, water and utility systems and growing outsourcing trends among public agencies and private entities. In addition to market tailwinds, the industry has additional growth potential as TIC and quality assurance continue to increase as a percentage of overall construction value.

The following key market tailwinds are expected to drive future demand for U.S. infrastructure and construction TIC and environmental consulting:

End Markets

The end markets we serve are characterized by various public and private clients that are faced with deteriorating asset conditions, outdated systems and expanding regulations. We operate across the entire built environment for a variety of end markets including, but not limited to, transportation, commercial, education, industrial, environmental, water, healthcare and power. Each of these end markets are experiencing tailwinds that drive ongoing maintenance and capital investment.

Transportation.  The U.S. transportation market has experienced broad increases in federal funding for U.S. Department of Transportation initiatives. Additionally, there is a renewed focus by the current U.S. presidential administration on infrastructure investment and a growing number of government projects focused on roads, bridges and airports. The current installed transportation base is aging and both public and private entities are increasingly outsourcing testing, inspection and program management services for their assets. At the state level, our presence in Georgia, Texas, California and New York positions us to capitalize on the potential increase in infrastructure funding in these states, as these states in particular have historically demonstrated higher than average investment in transportation infrastructure. Illustrative projects in the transportation market include airports, bridges, tollways, railways, highways, waterways, ports, tunnels, pedestrian routes and others. 

Commercial.  Asset operators are faced with increasing complexity of, and scrutiny around, regulatory requirements, which is driving demand for turnkey solutions and the professionalization of maintenance services. Additionally, corporations are increasing investment in information technology and smart-building features, frequently undergoing corporate relocations, and exhibiting a need for bespoke and unique facilities. The increase in outdated facilities alongside new technological and logistical needs has driven additional spend for warehouse and distribution facilities, as well as development spend across sports, recreation and stadiums. Illustrative projects in the commercial market include healthcare facilities, offices, multi-family properties, retail outlets, data centers, corporate headquarters, parking structures and religious facilities.

Education.  Population growth and increasing access to education is driving enrollments and creating a need for new and updated facilities. Academic institutions are placing a growing focus on environmental impacts and sustainability as seen through the implementation of smart- and green-building technologies. Illustrative projects in the education market include colleges, universities, K-12 facilities, service academies, stadiums, athletic facilities, research facilities and theatres.

Industrial and Environmental.  New quality, health, safety and environmental regulations are driving demand for compliance systems and services in industrial businesses. Extreme weather requires services such as hurricane, storm and flood clean-up efforts as seen in the Carolinas, Florida and Texas. Illustrative projects in the industrial and environmental markets include manufacturing, refineries, agricultural, utilities, petrochemicals, nuclear, midstream, disaster response and mitigation, and pulp and paper.

Water.  Broadening stress on the U.S. water network from outdated systems, population growth and extreme weather patterns has resulted in systems that are approaching the end of their useful lives. The aging water infrastructure must also be renovated to meet expanding government regulations and energy-efficiency standards. Illustrative projects in the water market include dams, levees, recycling facilities, drinking water, storage, inland waterways, wastewater and treatment plants. 

Government. Over time, municipalities, local, state and federal governments are increasingly tasked with the mandate to operate on leaner, more efficient budgets. We understand the many challenges associated with development, transportation and land-use for the government sector and we use our in-depth knowledge of social, political, and economic conditions to deliver sustainable projects to the communities that we serve. We partner with our clients and all stakeholders to ensure the cost-effective use of public funds and deliver better public infrastructure projects from concept to completion. Illustrative projects include program, construction and quality management projects for county, state and federal governments, disaster relief coordination and engineering and design of roadways and bridges.

Healthcare. From acute care hospitals to alcohol and drug treatment units, we provide services to assist our clients’ compliance with the Joint Commission Environment of Care, Centers for Disease Control and Prevention (CDC), and other applicable regulatory standards. Our nationwide network enables us to mobilize quickly, often avoiding disruption to our clients’ staff and patient populations. Illustrative projects include asset tagging, compliance assessment and permitting, construction materials testing, and site assessments.

Power. Whether our clients are considering new generation development, movement away from unregulated markets with renewed investment in regulated transmission and distribution, or retirement of older, less efficient generating assets, we understand the complexities of grid improvement and expansion projects and are poised to provide services such as siting and corridor studies, permitting, and real estate/right-of-way acquisition support. We assist our clients in determining where to add capacity, plan for construction, or build a new power plant, solar array, or wind turbine field. After construction, we are positioned to support the long-term safe and regulatory compliant operation of power assets. Illustrative projects include renewable development support services, environmental services, compliance assessment and permitting and construction management.

Service Lines

Testing, Inspection and Certification (“TIC”)

Any time a structure in the built environment is designed, built, repaired, refurbished or sold, our clients require critical path services to ensure infrastructure compliance, quality and integrity. We offer a comprehensive suite of TIC services to support a vast array of assets across different types, stages of life and end markets. In 2020, our TIC services represented approximately 35% of our revenues.

Illustrative services include:

Environmental Services

Safeguarding the environment requires proactively providing sustainable solutions while understanding and assisting our clients in complying with current regulatory demands. We utilize our technical staff, specialized equipment, and long-term relationships to manage a broad range of our clients’ environmental needs and assist our clients in overcoming environmental and regulatory challenges across a wide range of industries. By integrating environmental management into our clients’ business plans and goals, we endeavor to assist them in reducing potential crisis management costs and liabilities, thereby allowing them to focus on their core competencies and improve the health and livability of their communities. We provide comprehensive solutions to our clients’ most challenging ecological issues. Through our highly trained team of engineers, geologists, hydrogeologists, archaeologists, inspectors and other specialty environmental professionals, we have the capability to manage every aspect of a project’s environmental needs. In 2020, environmental services represented roughly 33% of our revenues.

Illustrative services include:

Engineering and Design (“E&D”)

We offer a full-service suite of civil, transportation, structural and architectural solutions for clients ranging from private developers to large federal agencies. We utilize our specialized expertise across a variety of disciplines to offer technical and project management solutions in order to assist clients in meeting their most demanding, large-scale challenges.

Our service offerings in E&D rest upon a foundation of years of experience in the design of a broad range of transportation and civil infrastructure projects, strong lines of communication, qualified planning and design professionals, and meticulous quality control measures throughout all stages of a project’s development. Our practice of knowledge-sharing among team members promotes continuous improvement of operations and is intended to provide maximum value for the client and reduce the likelihood of unforeseen problems during construction. Our E&D business has likewise been involved in supporting transportation and infrastructure work. In 2020, E&D represented 14% of our revenues.

Illustrative services include:

Program Management/Construction Management/Quality Management (“PCQM”).

We provide public and private sector clients with comprehensive support in managing large-scale improvement programs. We believe in a strong work ethic of transparency and collaboration between all parties involved and are uniquely connected to the communities we serve.

Our program management experience spans a broad spectrum of industries including hospitality, healthcare, education, industrial and municipal projects throughout the United States for both public and private sector clients. We are involved with projects totaling more than $2 billion of in-place construction, and we manage large and small-scale facility improvement programs and multi-year local option sales tax programs and provide comprehensive program support. We work hand-in-hand with governments and institutions during each stage of a capital improvement program. In 2020, our PCQM service offerings made up roughly 18% of our revenues.

Illustrative services include:

Key Clients and Projects

We currently serve over 10,000 different clients annually. While our ten largest clients accounted for approximately 25% of our consolidated revenue during the fiscal year ended December 31, 2020, no single client accounted for more than 10% during that period, and we do not have any one client where the loss of that one client would have a material adverse effect on the Company. Although we serve a highly diverse client base, approximately 50% of our net revenues were attributable to public and quasi-public sector clients. In this regard, public sector clients include U.S. federal, state and local government departments, agencies, systems and authorities, including Departments of Transportation, educational systems and public housing authorities, while quasi-public sector clients include utility service providers and energy producers. Of our private sector clients, our largest clients are commercial companies and contractors. Although we anticipate public and quasi-public sector clients to represent the majority of our revenues for the foreseeable future, we intend to continue expanding our service offerings to private sector clients.

During our history in the testing and inspection business, we have worked with such clients on such well-known projects as (in alphabetical order):

Contracts

We enter into contracts that contain two principal types of pricing provisions: (1) time and materials/cost-reimbursable; and (2) fixed price. For the year ended December 31, 2020, approximately 90% of our revenue was recognized from time and materials/cost-reimbursable contracts, with approximately 10% from fixed price contracts.

Cost-reimbursable contracts.  Cost-reimbursable contracts consist of the following:

Fixed price.  Fixed price contracts consist of the following:

Backlog

As of December 31, 2020, we had $628 million of backlog, of which $377 million, or approximately 60%, is expected to be recognized over the next twelve months and the majority of the balance over the next 24 months.

We analyze our backlog, which we define as fully awarded and contracted work or revenue we expect to realize for work completed, to evaluate operations and future revenue potential. Our contracted backlog includes revenue we expect to record in the future from signed contracts. In order to calculate backlog, we determine the amounts for contracted projects that are fully funded, and then determine the respective revenues expected to be realized upon completion of work. We use backlog to evaluate Company revenue growth as it typically follows growth in backlog. As backlog is not a defined accounting term, our computation of backlog may not be comparable with that of our peers. In addition, project cancellations and scope adjustments may occur from time to time. For example, certain contracts are terminable at the discretion of the client, with or without cause. These types of backlog reductions could adversely affect our revenue and margins. Our backlog for the period beyond the next twelve months may be subject to variation from the prior year as existing contracts are completed, delayed or renewed or new contracts are awarded, delayed or canceled. Accordingly, our backlog as of any particular date is an uncertain indicator of future earnings. As backlog is not a defined accounting term, our computation of backlog may not be comparable to that of our industry peers.

Offices

Our principal executive offices are located at 13215 Bee Cave Parkway, Building B, Suite 230, Austin, Texas 78738, which we have leased through October 2024 with annual lease terms of $0.3 million plus operating expenses over the life of the lease. We do not own any significant real property. We currently operate out of approximately 140 leased locations. Our lease terms vary from month-to-month to multi-year commitments. We do not consider any of these leased properties to be materially important to our overall operations. While we do believe it is necessary to maintain offices through which our services are coordinated, we feel there are an ample number of available office rental properties that could adequately serve our needs should we need to relocate or expand our operations.

Atlas Geographic Footprint

Human Capital Management

At Atlas, our employees are our assets; they are the very foundation of our success, the heart of our organization and the drivers of our future potential. As of December 31, 2020, we had approximately 3,200 employees, approximately 85% of which were full-time employees and approximately 80% of which represent technical staff with specialized expertise. We consider our employee relations to be good.

Our employee attrition rate for 2020 among all staff, part-time and full-time, was approximately 15%, which was higher than our attrition rate of approximately 10% for 2019 due to COVID-19-related workforce adjustments. To date, we have been able to locate and engage highly qualified employees as needed and we do not expect our growth efforts to be constrained by a lack of qualified personnel. However, our ability to attract, retain, engage and support a diverse and highly qualified workforce is essential to our future success. As such, we prioritize diversity within our employee population and proactively foster a culture of inclusion throughout our organization, and we place the health, safety and wellbeing of our employees above all else.

Focus on Diversity, Equity and Inclusion

To achieve our vision we seek to hire, develop, and promote a talented and diverse team of professionals nationwide. We believe leveraging the power of our different backgrounds, beliefs, perspectives and capabilities creates value for our Company and our shareholders.

At Atlas, we define diversity, equity and inclusion as follows:

In the third quarter of 2020, we formed the Atlas Diversity, Equity and Inclusion Council (the “DE&I Council”) comprised of employee representatives from varying backgrounds, geographic regions, functional groups and levels of seniority within our organization to focus on diversity, equity and inclusion strategy development, initiative execution and measurement of outcomes. The DE&I Council’s work is streamlined into three targeted programs: Employee Resources, Talent & Training and Community Outreach.

In the first quarter of 2021, we appointed Jamie Myers as our Chief Diversity Officer and launched seven employee resource groups (“ERGs”), which are voluntary, employee-led groups that strive to foster a diverse, inclusive workplace aligned with our core values. Our ERGs exist to provide support, career development and networking opportunities as well as create a safe space where employees can be their authentic selves. Each ERG is open to all employees and cross-collaboration across ERGs is encouraged. When we work together to foster an open, diverse workplace, mentoring and support can reshape our inclusive culture.

Atlas Employee Resource Groups

Employee Health, Safety and Wellbeing

We place the health, safety and wellbeing of our employees above all else in our business and operations. We are committed to providing a safe and healthy work environment for our team and aim to reduce risks and hazards throughout all of our offices and operations. We are committed to mitigating risks by providing health and safety training for all employees and communicating our health and safety practices throughout our business. We also comply with all applicable health and safety requirements and regulations at the local, state and national levels throughout all operations and projects.

At Atlas, we continuously emphasize the three underlying principles of safety:

The overall wellbeing, including the mental health, of our employees is of utmost important to us. We provide an Employee Assistance Program free of charge to all employees, through which a third party provider offers confidential guidance for personal issues that employees may be facing, including substance abuse, mental health, work, familial, financial and legal matters.

Competition

The U.S. infrastructure and construction TIC and environmental consulting market is generally highly fragmented and competitive due to the breadth of services offered and the technical complexity needed to meet increasingly stringent regulatory standards.

Industry participants compete on the strength of client relationships, expertise in local markets, technical capabilities, reputation for quality of service and reliability, and price. The ability to compete effectively also depends on employing highly skilled, qualified personnel to meet technical qualification and staffing requirements.

Barriers to entry in the industry are created by the requirement for technical capabilities, a reputation for expertise and reliability and deep relationships with both clients and prime contractors. Scale and breadth of service offerings can also be a barrier to entry for companies that do not have adequate resources or capacity to complete complex and large-scale projects. Customers are increasingly emphasizing safe work practices by placing a premium on limiting liability, creating an additional barrier to entry for those who cannot demonstrate a safety record at or above industry standards.

The firms operating in our industry range from large, global companies with broad service offerings to small-scale providers that typically service regional markets or offer specialized, niche services. Competitive dynamics in the industry are variable across end markets, localities, geographies and types and scopes of services, among other factors. With respect to engineering and design, we view our principal competitors to be AECOM, Jacobs Engineering Group Inc., NV5 Global, Inc., Parsons Corporation, Stantec Inc., Tetra Tech, Inc. and WSP Global Inc. In the area of testing and inspection, we view our principal competitors to be Applus Services, S.A., ALS Limited, Bureau Veritas S.A., Intertek Group plc and SGS S.A. With respect to professional services, we view our principal competitors to be Accenture plc, Booz Allen Hamilton Inc., CGI Inc., FTI Consulting, Inc., Huron Consulting Group Inc. and ICF International, Inc. In all of the aforementioned industries there are also other small- and mid-sized regional players with whom we compete. Our ability to compete successfully depends upon the effectiveness of our marketing efforts, the strength of our client relationships, our ability to accurately estimate costs, the quality of the work we perform, our ability to hire and train qualified personnel and our ability to obtain insurance on commercially reasonable terms.

Information About Our Executive Officers

Incorporated by reference from our definitive proxy statement for the 2021 Annual Meeting of Stockholders, to be filed within 120 days of our fiscal 2020 year end. 

Seasonality

Due primarily to inclement weather conditions, which lead to project delays and slower completion of contracts, and a greater number of holidays in the United States, our operating results during the months of December, January and February are generally lower than our operating results during other months. As a result, our revenue and net income for the first and fourth quarters of a fiscal year may be lower than our results for the second and third quarters of a fiscal year.

Insurance and Risk Management

We maintain insurance covering professional liability and claims involving bodily injury and property damage. We consider our present limits of coverage, deductibles and reserves to be adequate. Wherever possible, we endeavor to eliminate or reduce the risk of loss on a project through the use of quality assurance and control, risk management, workplace safety and similar methods.

Risk management is an integral part of project management. We have a strict project review framework including escalation to senior management for any fixed price contracts above $5 million.

Regulation

We are regulated in a number of fields in which we operate. We contract with various U.S. governmental agencies and entities, and when working with such governmental agencies and entities, we must comply with laws and regulations relating to the formation, administration and performance of contracts. These laws and regulations contain terms that, among other things:

To help ensure compliance with these laws and regulations, employees are sometimes required to complete tailored ethics and other compliance training relevant to their position and our operations.

Legal and Environmental

From time to time, we are subject to various legal proceedings that arise out of our normal course of business or otherwise. We are not currently a party to any legal proceedings that, individually or in the aggregate, are expected to materially impact our business, financial position, results of operations and cash flows, taken as a whole.

We must comply with a number of federal, tribal, state and local laws and regulations that strictly regulate the handling, removal, treatment, transportation and disposal of toxic and hazardous substances, or that otherwise relate to health and safety or the protection of the environment. Liabilities related to environmental contamination or human exposure to hazardous substances, or a failure to comply with applicable regulations, could result in substantial costs, including clean-up costs; fines and administrative, civil or criminal sanctions; third-party claims for property damage or personal injury; or implementation of remediation activities, including investigation, assessment and short- or long-term monitoring activities.

Available Information

We make available free of charge on our website, www.oneatlas.com, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to the Securities Exchange Act of 1934, as soon as reasonably practicable after we electronically file such information with, or furnish it to, the SEC. These documents are also available on the SEC’s website at www.sec.gov. The information on our website is not, and shall not be deemed to be, a part of this Annual Report on Form 10-K or incorporated into any of our other filings with the SEC.

ITEM 1A. RISK FACTORS

RISK FACTORS

You should carefully consider the following risk factors, together with all of the other information included in this Annual Report on Form 10-K, as these risks could have a material adverse effect on our business, results of operations and financial condition.

Additionally, the risks and uncertainties described in this Annual Report on Form 10-K are not the only risks and uncertainties that we may face. Additional risks and uncertainties not presently known to us or that we currently believe to be immaterial may also adversely affect our business. Furthermore, the ongoing global pandemic related to COVID-19 may amplify many of the risks discussed below to which we are subject and, given the unpredictable, unprecedented and fluid nature of the pandemic, it may materially and adversely affect us in ways that are not anticipated by or known to us or that we do not currently consider to present significant risk. Therefore, at this time, we are unable to estimate the extent to which the pandemic and its related impacts will adversely affect our business, financial condition and results of operations.

Risks Relating to Our Business and Industry

Outbreaks of communicable diseases, including the ongoing global pandemic related to COVID-19, have had an adverse effect on our business, financial condition and results of operations and could in the future have, directly or indirectly, a material adverse effect on our business, financial condition and results of operations. The duration and extent to which this will impact our future financial condition and results of operations remains uncertain.

Global or national health concerns, including the outbreak of a pandemic or contagious disease, can negatively impact the global economy and, therefore, demand and pricing for our services. For example, the outbreak of the COVID-19 pandemic and the measures being taken to address and limit the spread of the virus have adversely affected the U.S. economy and financial markets, resulting in an economic downturn that has negatively impacted the demand for our services. In response to market conditions, during the second quarter of 2020, we reduced our workforce through various actions. The full impact of the COVID-19 outbreak continues to evolve.

Furthermore, the COVID-19 pandemic also raises the possibility of an extended global economic downturn and has caused volatility in financial markets, which could affect demand for our services and impact our financial condition and results of operations even after the pandemic is fully contained. For example, if a client’s financial difficulties become severe, the client may be unwilling or unable to pay our invoices in the ordinary course of business, which could adversely affect collections of both our accounts receivable and unbilled services. We continue to monitor the impact of the COVID-19 pandemic on our cash flows and on the credit and financial markets.

As a safety focused organization, since the outbreak of COVID-19 and continuing throughout the beginning of 2021, we have encouraged our employees to work from home wherever possible and to honor all shelter in place rules put forth by their state or local governments. As a result, we may have increased cybersecurity and data security risks, due to increased use of home Wi-Fi networks and virtual private networks, as well as increased disbursement of physical machines. While we continue to implement information technology controls to reduce the risk of a cybersecurity or data security breach, there is no guarantee that these measures will be adequate to safeguard all systems with an increased number of employees working remotely.

We are currently monitoring, and will continue to monitor, the safety of our employees during the COVID-19 pandemic. We are evaluating, and will continue to evaluate, the impact of COVID-19 on current projects, but the full effects of COVID-19 on our operations are still unknown. The duration and extent of the impact from the COVID-19 pandemic continues to be evaluated by governments and experts and depends on future developments that cannot be accurately predicted at this time, such as the severity and transmission rate of the virus, the extent and effectiveness of containment actions, the long-term efficacy of COVID-19 vaccines, the emergence of new strains of the virus and the impact of these and other factors on our employees and clients. In the event of a reinstitution of shelter-in-place orders within the cities and municipalities where we operate, our future results could be further negatively impacted and could result in the re-designation of infrastructure spending to other uses. Disruptions to capital markets due to the uncertainty surrounding the length and severity of the COVID-19 pandemic could also delay the timing of our customers’ capital projects.

Our business strategy relies in part on acquisitions to sustain our growth. Acquisitions of other companies present certain risks and uncertainties.

Our business strategy involves growth through, among other things, the acquisition of other companies. We may finance these acquisitions or other strategic investments with cash, the issuance of equity or equity-linked securities or a combination of the foregoing, and therefore any such acquisition or strategic investment could be dilutive to our existing stockholders. We try to acquire companies that we believe will strategically fit into our business and growth objectives, including, for example, our acquisition of ATC Group Services LLC in January 2019, LONG in February 2020, Alta Vista in September 2020 and WesTest in December 2020 and our February 2021 entry into a definitive agreement to acquire Atlantic Engineering Laboratories, Inc. and Atlantic Engineering Laboratories of NY, Inc. We are continuously evaluating multiple acquisition or strategic investment opportunities, some of which may be material to our results of operations and financial condition. If we are unable to successfully integrate and develop acquired businesses, we could fail to achieve anticipated synergies and cost savings, including any expected increases in revenues and operating results, which could have a material adverse effect on our financial results.

We may not be able to identify suitable acquisition or strategic investment opportunities or may be unable to obtain the required consent of our lenders and, therefore, may not be able to complete such acquisitions or strategic investments. We may incur expenses associated with sourcing, evaluating and negotiating acquisitions (including those that we do not complete), and we may also pay fees and expenses associated with financing acquisitions to investment banks and other advisors. Any of these amounts may be substantial, and together with the size, timing and number of acquisitions we pursue, may negatively affect and cause significant volatility in our financial results.

In addition, we have assumed, and may in the future assume, liabilities of the company we are acquiring. While we retain third-party advisors to assist with due diligence and consult on potential liabilities related to these acquisitions, there can be no assurances that all potential liabilities will be identified or known to us. If there are unknown liabilities or other unforeseen obligations, our business could be materially adversely affected.

We cannot assure you that we will achieve synergies and cost savings in connection with prior or future acquisitions.

We actively pursue acquisition opportunities consistent with our growth strategy. We may not achieve anticipated cost savings in connection with prior or future acquisitions within the anticipated time frames or at all. A variety of risks could cause us not to realize some or all of these expected benefits. These risks include, among others, higher than expected standalone overhead expenses, delays in the anticipated timing of activities related to cost saving initiatives and the incurrence of other unexpected costs associated with operating the acquired business. Moreover, our implementation of cost savings initiatives may disrupt our operations and performance, and our estimated cost savings from such initiatives may be based on assumptions that prove to be inaccurate. If, for any reason, the benefits we realize are less than our estimates or our improvement initiatives adversely affect our operations or cost more or take longer to implement than we project, or if our assumptions prove inaccurate, our results of operations may be materially and adversely affected.

In addition, our operating results from these acquisitions could, in the future, result in impairment charges for any of our intangible assets, including goodwill, or other long-lived assets, particularly if economic conditions worsen unexpectedly. These changes could materially adversely affect our results of operations, financial condition, stockholders’ equity, and cash flows.

If we are unable to integrate acquired businesses successfully, our business could be harmed.

As part of our business strategy to pursue accretive acquisitions, we intend to selectively pursue targets that provide complementary, low-risk services and expand our national platform. Our inability to successfully integrate future acquisitions could impede us from realizing all of the benefits of those acquisitions and could weaken our business operations. The integration process of any particular acquisition may disrupt our business and, if implemented ineffectively, may preclude realization of the full benefits expected by us and could harm our results of operations. In addition, the overall integration process may result in unanticipated problems, expenses, liabilities and competitive responses and may cause our stock price to decline.

The difficulties of integrating acquisitions include, among other things:

In addition, even if the operations of an acquisition are integrated successfully, we may not realize the full benefits of such acquisition, including the synergies, cost savings or growth opportunities that we expect. These expected benefits may not be achieved within the anticipated time frame or at all.

Further, we have assumed, and may in the future assume, liabilities of the company we are acquiring. While we retain third-party advisors to assist with due diligence and consult on potential liabilities related to these acquisitions, there can be no assurances that all potential liabilities will be identified or known to us. If there are unknown liabilities or other unforeseen obligations, our business could be materially adversely affected. Acquisitions may also cause us to:

Our continued success is dependent upon our ability to hire, retain and utilize qualified personnel.

The success of our business and our ability to operate profitably is dependent upon our ability to hire, retain and utilize qualified personnel, including engineers, architects, designers, craft personnel and corporate management professionals who have the required experience and expertise at a reasonable cost. The market for these and other personnel is competitive. From time to time, it may be difficult to attract and retain qualified individuals with the expertise, and in the timeframe, demanded by our clients, or to replace such personnel when needed in a timely manner. In certain geographic areas, for example, we may not be able to satisfy the demand for our services because of our inability to successfully hire and retain a sufficient amount of qualified personnel. Furthermore, some of our personnel hold government-granted clearance that may be required to obtain government projects. If we were to lose some or all of these personnel, they would be difficult to replace. Loss of the services of, or failure to recruit, qualified technical and management personnel could limit our ability to successfully complete existing projects and compete for new projects.

In addition, if any of our key personnel retire or otherwise leave the Company, we must have appropriate succession plans in place and successfully implement such plans, which requires devoting time and resources toward identifying and integrating new personnel into leadership roles and other key positions. Our inability to attract and retain qualified personnel or effectively implement appropriate succession plans could have a material adverse impact on our business, financial condition and results of operations.

The cost of providing our services, including the extent to which we utilize our workforce, affects our profitability. For example, the uncertainty of contract award timing can present difficulties in matching our workforce size with our contracts. If an expected contract award is delayed or not received, we could incur costs resulting from excess staff, reductions in staff, or redundancy of facilities that could have a material adverse impact on our business, financial condition and results of operations.

Our profitability could suffer if we are not able to maintain adequate utilization of our workforce.

The cost of providing our services, including the extent to which we utilize our workforce, affects our profitability. The rate at which we utilize our workforce is affected by several factors, including:

If we are not able to successfully manage our growth strategy, our business operations and financial results may be adversely affected.

Our expected future growth presents numerous managerial, administrative and operational challenges. Our ability to manage the growth of our operations will require us to continue to improve our management information systems and our other internal systems and controls. In addition, our growth will increase our need to attract, develop, motivate, and retain both our management and professional employees. The inability of our management to effectively manage our growth or the inability of our employees to achieve anticipated performance could have a material adverse effect on our business.

Construction and maintenance sites are inherently dangerous workplaces. If we, the owner, or others working at a project site fail to maintain a safe work site, we can be exposed to significant financial losses and reputational harm, as well as civil and criminal liabilities.

Construction and maintenance sites often put our employees and others in proximity to large pieces of mechanized equipment, moving vehicles, chemical and manufacturing processes and highly regulated materials in a challenging environment. If we fail to implement safety procedures, or if the procedures we implement are ineffective, or if others working at the site fail to implement and follow appropriate safety procedures, our employees and others may become injured, disabled or even lose their lives, the completion or commencement of our projects may be delayed and we may be exposed to litigation, investigations, fines, penalties or claims for damages. Unsafe work sites also have the potential to increase employee turnover, increase the cost of a project to our clients and raise our operating and insurance costs. Any of the foregoing could result in financial losses or reputational harm, which could have a material adverse impact on our business, financial condition and results of operations.

In addition, our projects can involve the handling of hazardous and other highly regulated materials, which, if improperly handled or disposed of, could subject us to civil and/or criminal liabilities. We are also subject to regulations dealing with occupational health and safety. Although we maintain functional groups whose primary purpose is to ensure we implement effective HSE work procedures throughout our organization, including construction sites and maintenance sites, the failure to comply with such regulations could subject us to liability. In addition, despite the work of our functional groups, we cannot guarantee the safety of our personnel or that there will be no damage to or loss of our work, equipment or supplies.

Our safety record is critical to our reputation. Many of our clients require that we meet certain safety criteria to be eligible to bid for contracts, and many contracts provide for automatic termination or forfeiture of some or all of our contract fees or profits in the event that we fail to meet certain measures. Accordingly, if we fail to maintain adequate safety standards, we could suffer reduced profitability or the loss of projects or clients, which could have a material adverse impact on our business, financial condition and results of operations.

Demand from clients is cyclical and vulnerable to economic downturns. If the economy weakens or client spending declines, our financial results may be impacted.

Demand for services from our clients is cyclical and vulnerable to economic downturns, which may result in clients delaying, curtailing or canceling proposed and existing projects. Our business traditionally lags the overall recovery in the economy. If the economy weakens or client spending declines, then our revenue, profits and overall financial condition may deteriorate.

In addition, if there is an economic downturn, our existing and potential clients may either postpone entering into new contracts or request price concessions. Difficult financing and economic conditions may cause some of our clients to demand better pricing terms or delay payments for services we perform, thereby increasing the average number of days our receivables are outstanding and the potential of increased credit losses on uncollectible invoices. Further, these conditions may result in the inability of some of our clients to pay us for services that we have already performed. Accordingly, these factors affect our ability to forecast our future revenue and earnings from business areas that may be adversely impacted by market conditions.

Our results of operations depend on the award of new contracts and the timing of the performance of these contracts.

Our revenues are derived from new contract awards. Delays in the timing of awards or cancellations of such prospects as a result of economic conditions, material and equipment pricing and availability or other factors could impact our long-term projected results. It is particularly difficult to predict whether or when we will receive large-scale projects as these contracts frequently involve a lengthy and complex bidding and selection process, which is affected by several factors, such as market conditions or governmental and environmental approvals. Since a significant portion of our revenues is generated from such projects, our results of operations and cash flows can fluctuate significantly from quarter to quarter depending on the timing of our contract awards and the commencement or progress of work under awarded contracts. Furthermore, many of these contracts are subject to financing contingencies and, as a result, we are subject to the risk that the customer will not be able to secure the necessary financing for the project.

In addition, certain contracts require us to satisfy specific progress or performance milestones in order to receive payment from the customer. As a result, we may incur significant costs for engineering, materials, components, equipment, labor or subcontractors prior to receipt of payment from a customer.

The uncertainty of contract award timing can also present difficulties in matching workforce size with contract requirements. In some cases, we maintain and bear the cost of a ready workforce that is larger than necessary under existing contracts in anticipation of future workforce needs for expected contract awards. If an expected contract award is delayed or not received, we may incur additional costs resulting from reductions in staff or redundancy of facilities, which could have a material adverse effect on our business, financial condition and results of operations.

The contracts in our backlog may be adjusted, cancelled or suspended by our clients and, therefore, our backlog is not necessarily indicative of our future revenues or earnings. Additionally, even if fully performed, our backlog is not a good indicator of future gross margins.

Backlog represents the total dollar amount of revenues we expect to record in the future as a result of performing work under contracts that have been awarded to us. As of December 31, 2020, our backlog totaled approximately $628 million. There is no assurance that backlog will be realized as revenues in the amounts reported or, if realized, will result in profits. In accordance with industry practice, substantially all of our contracts are subject to cancellation, termination or suspension at the discretion of the client. In the event of a project cancellation, we would generally have no contractual right to the total revenue reflected in our backlog. Projects can remain in backlog for extended periods of time depending on the nature of the project and the timing of the services required by the project. The risk of contracts in backlog being cancelled or suspended generally increases during periods of widespread economic slowdowns or in response to changes in commodity prices.

The contracts in our backlog are subject to changes in the scope of services to be provided as well as adjustments to the costs relating to the contracts. The revenue for certain contracts included in backlog is based on estimates. Additionally, the way we perform on our individual contracts can greatly affect our gross margins and future profitability.

If our clients delay in paying or fail to pay amounts owed to us, our business operations and financial results may be adversely impacted.

Our accounts receivable are a significant asset on our balance sheet. While we take steps to evaluate and manage the credit risks relating to our clients, economic downturns or other events can adversely affect the markets we serve and our clients’ ability to pay, which could reduce our ability to collect amounts due from clients. We may be unable to collect amounts due or damages we are awarded from certain clients, and our efforts to collect such amounts may damage our client relationships. The disruptions caused by the COVID-19 pandemic have heightened the risk that we may not receive payment for services performed. If our clients delay in paying or fail to pay us a significant amount of our outstanding receivables, it could have a material adverse effect on our liquidity, results of operations, and financial condition.

Our services expose us to significant risks of liability, and our insurance policies may not provide adequate coverage.

If we fail to provide our services in accordance with applicable professional standards or contractual requirements, we could be exposed to significant monetary damages or even criminal violations. Our engineering practice, for example, involves professional judgments regarding the planning, design, development, construction, operations and management of industrial facilities and public infrastructure projects. While we do not generally accept liability for consequential damages in our contracts, and although we have adopted a range of insurance, risk management and risk avoidance programs designed to reduce potential liabilities, a catastrophic event at one of our project sites or completed projects resulting from the services we have performed could result in significant professional or product liability, and warranty or other claims against us as well as reputational harm, especially if public safety is negatively impacted. These liabilities could exceed our insurance limits or the fees we generate, may not be covered by insurance at all due to various exclusions in our coverage and self-insured retention amounts, and could impact our ability to obtain insurance in the future or increase the cost of obtaining such insurance. Further, we do not have insurance against all foreseeable risks, either because insurance is not available or because of the high premium cost. Even where coverage applies, the policies have deductibles, which result in our assumption of exposure for certain amounts with respect to any claim filed against us. In addition, clients or subcontractors who have agreed to indemnify us against any such liabilities or losses might refuse or be unable to pay us. An uninsured claim, either in part or in whole, as well as any claim covered by insurance but subject to a high deductible, if successful and of a material magnitude, could have a material adverse impact on our business, financial condition and results of operations.

Unavailability or cancellation of third-party insurance coverage would increase our overall risk exposure as well as disrupt the management of our business operations.

We maintain insurance coverage from third-party insurers as part of our overall risk management strategy, and some of our contracts require us to maintain specific insurance coverage limits. If any of our third-party insurers fail, suddenly cancel coverage or are otherwise unable to provide us with adequate insurance coverage, our overall risk exposure and operational expenses would increase and the management of our business operations would be disrupted. In addition, there can be no assurance that any of our existing insurance coverage will be renewable upon the expiration of the coverage period or that future coverage will be affordable at the required limits.

Catastrophic events may adversely impact our business operations.

Our business operations may be adversely impacted by force majeure or extraordinary events beyond the control of the contracting parties, such as natural and man-made disasters as well as terrorist attacks. Such events could result in the closure of offices, interruption of projects and the relocation of employees. We typically remain obligated to perform our services after a terrorist attack or natural disaster unless the contract contains a force majeure clause that relieves us of our contractual obligations. If we are not able to react quickly to a force majeure event, our operations may be affected significantly, which would have a negative impact on our business operations.

Further, we rely on our network and third-party infrastructure and enterprise applications, internal technology systems and our website for our development, marketing, operational, support, hosted services and sales activities. Despite our implementation of network security measures, we are vulnerable to disruption, infiltration or failure of these systems or third-party hosted services in the event of a major earthquake, fire, power loss, telecommunications failure, cyberattack, war, terrorist attack or other catastrophic event, and any such occurrence could cause system interruptions, reputational harm, loss of intellectual property, lengthy interruptions in our services, breaches of data security and loss of critical data and could harm our future operating results.

We engage in a highly competitive business. If we are unable to compete effectively, we could lose market share and our business and results of operations could be negatively impacted.

We face intense competition to provide testing, inspection, engineering, environmental, program management and consulting services to clients. The markets we serve are highly competitive and we compete against many regional, national and multinational companies.

The extent of our competition varies by industry, geographic area and project type. Our projects are frequently awarded through a competitive bidding process, which is standard in our industry. We are constantly competing for project awards based on pricing, schedule and the breadth and technical sophistication of our services. Competition can place downward pressure on our contract prices and profit margins and may force us to accept contractual terms and conditions that are less favorable to us, thereby increasing the risk that, among other things, we may not realize profit margins at the same rates as we have seen in the past or may become responsible for costs or other liabilities we have not accepted in the past. If we are unable to compete effectively, we may experience a loss of market share or reduced profitability or both, which, if significant, could have a material adverse impact on our business, financial condition and results of operations.

The nature of our contracts, particularly those that are fixed price, subject us to risks of cost overruns. We may experience reduced profits or, in some cases, losses if costs increase above budgets or estimates or if projects experience schedule delays.

As of December 31, 2020, approximately 10% of our revenues were earned under fixed price contracts. Fixed price contracts require us to estimate the total cost of the project in advance of performing it. For fixed price contracts, we may benefit from any cost savings, but we bear greater risk of paying some, if not all, of any cost overruns. Fixed price contracts are established in part on partial or incomplete designs, cost and scheduling estimates that are based on several assumptions, including those about future economic conditions, commodity and other materials pricing and availability of labor, equipment and materials, in addition to other exigencies. If the design or the estimates prove inaccurate or if circumstances change due to, among other things, unanticipated technical problems, difficulties in obtaining permits or approvals, changes in local laws or labor conditions, weather or other delays beyond our control, changes in the costs of equipment or raw materials, our vendors’ or subcontractors’ inability or failure to perform or changes in general economic conditions, then cost overruns may occur and we could experience reduced profits or, in some cases, a loss for that project. These risks are exacerbated for projects with long-term durations because there is an increased risk that the circumstances on which we based our original estimates will change in a manner that increases costs. If the project is significant, or there are one or more issues that impact multiple projects, cost overruns could have a material adverse impact on our business, financial condition and results of operations.

We derive a large portion of our gross revenues from government agencies, and any disruption in government funding or in our relationship with those agencies could adversely affect our business.

During fiscal 2020, approximately 50% of our gross revenues was derived from federal, state and local government related projects. The demand for our government-related services is generally driven by the level of government program funding. Each year, client funding for some of our U.S. government contracts may directly or indirectly rely on government appropriations or public-supported financing. Legislatures may appropriate funds for a given project on a year-by-year basis, even though the project may take more than one year to perform. In addition, public-supported financing such as U.S. state and local municipal bonds may be only partially raised to support existing projects. Similarly, an economic downturn may make it more difficult for U.S. state and local governments to fund projects. In addition to the state of the economy and competing political priorities, public funds and the timing of payment of these funds may be influenced by:

These and other factors could cause government agencies to delay or cancel programs, to reduce their orders under existing contracts, to exercise their rights to terminate contracts, or not to exercise contract options for renewals or extensions. Any of these actions could have a material adverse effect on our revenue or timing of contract payments from these agencies.

Governmental agencies may modify, curtail or terminate our contracts at any time prior to their completion and, if we do not replace them, we may suffer a decline in revenue.

Most government contracts may be modified, curtailed or terminated by the government either at their discretion or upon the default of the contractor. If the government terminates a contract at its discretion, then we typically can recover only costs incurred or committed, settlement expenses and profit on work completed prior to termination, which could prevent us from recognizing all our potential revenue and profits from that contract. In addition, for some assignments, the U.S. government may attempt to “insource” the services to government employees rather than outsource to a contractor. If a government terminates a contract due to our default, we could be liable for excess costs incurred by the government in obtaining services from another source.

Our failure to comply with a variety of complex procurement rules and regulations could damage our reputation and result in our being liable for penalties, including termination of our government contracts, disqualification from bidding on future government contracts and suspension or debarment from government contracting.

We must comply with laws and regulations relating to government contracts, which affect how we do business with our customers and may impose added costs on our business. Some significant laws and regulations that affect us include:

Government agencies routinely audit and review a contractor’s performance on government contracts, indirect cost rates and pricing practices, and compliance with applicable contracting and procurement laws, regulations and standards. Any failure to comply with applicable laws and regulations could result in civil or criminal penalties or administrative sanctions such as contract termination, forfeiture of profits, damage to our reputation, price or fee reductions or suspension or debarment from contracting with the government, each of which could materially adversely affect our business, results of operations and financial condition.

In addition, federal, state and local government entities may revise existing contract rules and regulations or adopt new contract rules and regulations at any time and may also face restrictions or pressure regarding the type and amount of services that they may obtain from private contractors. Any of these changes could impair our ability to obtain new contracts or renew contracts under which we currently perform when those contracts are eligible for recompetition.

We are dependent on third parties to complete certain elements of our contracts.

We hire third-party subcontractors to perform certain work under our contracts. We also rely on third-party equipment manufacturers or suppliers to provide equipment and materials used for certain of our projects. If we are unable to hire qualified subcontractors or find qualified equipment manufacturers or suppliers, our ability to successfully complete certain projects could be impaired. If we are not able to locate qualified third-party subcontractors, or the amount we are required to pay for subcontractors or equipment and supplies exceeds what we have estimated, especially in a lump sum or a fixed price contract, we may suffer losses on these contracts. If a subcontractor, supplier or manufacturer fails to provide services, supplies or equipment as required under a contract for any reason, we may be required to source these services, equipment or supplies to other third parties on a delayed basis or on less favorable terms, which could negatively impact contract profitability. There is a risk that we may have disputes with our subcontractors relating to, among other things, the quality and timeliness of work performed, customer concerns about a subcontractor or our failure to extend existing task orders or issue new task orders under a contract. In addition, faulty workmanship, equipment or materials could impact the overall project, resulting in claims against us for failure to meet required project specifications, imposition of financial penalties or requirements to provide additional services to ensure the adequate performance and delivery of the contracted services. We may be jointly and severally liable for the third party’s actions or contract performance.

Third parties may find it difficult to obtain sufficient financing to fund their operations, and such inability could adversely affect such third party’s ability to provide materials, equipment or services, which could have a material adverse impact on our business, financial condition and results of operations. In addition, a failure by a third-party subcontractor, supplier or manufacturer to comply with applicable laws, regulations or client requirements could negatively impact our business and, for government clients, could result in fines, penalties, suspension or even debarment being imposed on us, which could have a material adverse impact on our business, financial condition and results of operations.

We may be precluded from providing certain services due to conflict of interest issues.

Many of our clients are concerned about potential or actual conflicts of interest in retaining management consultants. U.S. federal government agencies have formal policies against continuing or awarding contracts that would create actual or potential conflicts of interest with other activities of a contractor. These policies may prevent us from bidding for or performing government contracts resulting from or relating to certain work we have performed. In addition, services performed for a commercial or government client may create a conflict of interest that precludes or limits our ability to obtain work from other public or private organizations. Any conflicts of interest that preclude us from providing certain services could have a material adverse impact on our business, financial condition and results of operations.

If we fail to comply with federal, state and local governmental requirements, our business may be adversely affected.

We are subject to U.S. federal, state and local laws and regulations that affect our business. Although we have policies and procedures to comply with U.S. trade laws, the violation of such laws could subject us and our employees to civil or criminal penalties, including substantial monetary fines, or other adverse actions including debarment from participation in U.S. government contracts and could damage our reputation and our ability to do business.

If we fail to maintain an effective system of internal control, we may not be able to accurately report our financial results.

We are required to comply with Section 404 of the Sarbanes-Oxley Act of 2002 (“Sarbanes-Oxley”), which requires, among other things, a company to evaluate annually the effectiveness of its internal control over financial reporting as of the end of each fiscal year and to include a management report assessing the effectiveness of its internal control over financial reporting in its Annual Report on Form 10-K. Effective internal control over financial reporting is necessary to provide reliable financial reports and to help prevent fraud. The Company’s management team and other personnel are required to devote a substantial amount of time to these compliance requirements. Moreover, these rules and regulations increase legal and financial compliance costs and make some activities more time-consuming and costly. Despite best efforts, we cannot be certain that we will be able to maintain adequate internal controls over our financial processes and reporting in the future or that we will be able to comply with our obligations under Section 404 of Sarbanes-Oxley.

An impairment charge on our goodwill could have a material adverse impact on our financial position and results of operations.

Because we have grown in large part through acquisitions, goodwill and intangible assets represent a substantial portion of our assets. Under U.S. GAAP, we are required to test goodwill carried in our combined balance sheets for possible impairment on an annual basis based upon a fair value approach. As of December 31, 2020, we have $109.0 million of goodwill, representing 29% of our total assets of $376.1 million. We also are required to test goodwill for impairment between annual tests if events occur or circumstances change that would more likely than not reduce our enterprise fair value below our book value. These events or circumstances could include a significant change in the business climate, including a significant sustained decline in a reporting unit’s market value, legal factors, operating performance indicators, competition, sale or disposition of a significant portion of our business, potential government actions toward our facilities, and other factors.

If our market capitalization drops significantly below the amount of net equity recorded on our balance sheet, this might indicate a decline in our fair value and would require us to further evaluate whether our goodwill has been impaired. If the fair value of our reporting units is less than their carrying value, we could be required to record an impairment charge. The amount of any impairment could be significant and could have a material adverse impact on our financial position and results of operations for the period in which the charge is taken.

Rising inflation, interest rates and/or construction costs could reduce the demand for our services as well as decrease our profit on our existing contracts, in particular with respect to our fixed price contracts.

Rising inflation, interest rates, or construction costs could reduce the demand for our services. In addition, we bear all the risk of rising inflation with respect to those contracts that are fixed price. Because a portion of our revenues are earned from fixed price contracts (approximately 10% as of December 31, 2020), the effects of inflation on our financial condition and results of operations over the past few years have been generally minor. However, if we expand our business into markets and geographic areas where fixed price and lump sum work is more prevalent, inflation may have a larger impact on our results of operations in the future. Therefore, increases in inflation, interest rates or construction costs could have a material adverse impact on our business, financial condition and results of operations.

We are subject to professional standards, duties and statutory obligations on professional reports and opinions we issue, which could subject us to liability and monetary damages.

We issue reports and opinions to clients based on our professional engineering expertise as well as our other professional credentials that subject us to professional standards, duties and obligations regulating the performance of our services. If a client or another third party alleges that our report or opinion is incorrect or it is improperly relied upon and we are held responsible, we could be subject to significant liability or claims for damages. In addition, our reports and other work product may need to comply with professional standards, licensing requirements, securities regulations and other laws and rules governing the performance of professional services in the jurisdiction where the services are performed. We could be liable to third parties who use or rely upon our reports and other work product even if we are not contractually bound to those third parties. These events could in turn result in monetary damages and penalties.

Certain of our services involve assisting our clients’ compliance with environmental, health, and safety laws and regulations that may require substantial costs to comply with, and our failure to effectively assist our client’s compliance with such laws and regulations may expose us to significant penalties, damages, or costs of remediation. Changes in such laws or regulations could also directly or indirectly reduce the demand for our services or make our operations more costly.

Our operations and our clients’ projects are subject to federal, tribal, regional, state, and local laws and regulations relating to protection of natural resources and the environment, health and safety of our employees and the public, and waste management. These laws and regulations impose numerous obligations, including the acquisition of permits to conduct regulated activities, the incurrence of capital or other substantial expenditures to prevent releases of regulated materials, the imposition of substantial liabilities for pollution or other harm to species or the environment resulting from our clients’ operations or other harm to species or the environment, and the applicability of specific health and safety protections for our employees, our clients’ employees and the public.

Examples of laws and regulations that govern the environmental aspects of our clients’ businesses, and our provision of environmental compliance services to our clients, include the following:

Any failure on our part to comply with laws and regulations such as those listed above, or to effectively assist our clients’ compliance with such laws and regulations, may result in increases in operational costs or project delays to our clients and could ultimately lead to claims against us. In addition, environmental laws and regulations have been subject to frequent changes over the years and tend to become more stringent over time, and the imposition of more stringent or complex laws and regulations could increase the likelihood that we may fail to comply with, or to effectively assist our clients’ compliance with, such laws and regulations. Our failure to comply with applicable environmental, health, and safety laws and regulations, our failure to effectively assist our clients’ compliance with such laws and regulations in connection with projects, or the failure of any of our subcontractors to comply with such laws and regulations could trigger a variety of administrative, civil, and criminal enforcement measures, including investigations, the assessment of monetary penalties, the imposition of remedial requirements or other corrective measures, and the issuance of directives or orders enjoining existing or future operations or projects, any of which could have a material adverse effect on the financial condition of our business.

Changes in natural resource management, climate change or infrastructure industry laws, regulations, and programs could directly or indirectly reduce the demand for our services, or could make our operations more costly, which could in turn negatively impact our revenue.

Our business and results of operations could be adversely affected by the passage of climate change, defense, environmental, infrastructure and other legislation, policies and regulations. Growing concerns about climate change may result in the imposition of additional environmental regulations. For example, legislation, international protocols, regulation or other restrictions on emissions could increase the costs of projects for our clients or, in some cases, prevent a project from going forward, thereby potentially reducing the need for our services. Furthermore, compliance with these laws and regulations may, from time to time, increase the costs associated with our operations; delay our clients’ projects or operations; or result in liabilities for personal injuries, property damage, discharge of hazardous materials, remediation and clean-up costs, and other environmental damages. In addition, relaxation or repeal of laws and regulations, or changes in governmental policies regarding environmental, defense, infrastructure or other industries we serve could result in a decline in demand for our services, which could in turn negatively impact our revenues. We cannot predict when or whether any of these various proposals may be enacted or what their effect will be on us or on our clients.

Finally, environmental, social, and governance (“ESG”) goals and programs, which typically include extralegal targets related to environmental stewardship, social responsibility, and corporate governance, have become an increasing focus of investors, shareholders and activists across many industries. While reporting on ESG metrics remains voluntary, access to capital and investors is likely to favor companies with robust ESG programs in place.

If ESG metrics and/or reporting become mandatory, our costs of planning, designing, measuring and monitoring, and reporting on our operations could increase.

If we fail to complete a project in a timely manner, miss a required performance standard, or otherwise fail to adequately perform on a project, then we may incur a loss on that project, which may reduce or eliminate our overall profitability.

Our engagements often involve large-scale, complex projects. The quality of our performance on such projects depends in large part upon our ability to manage the relationship with our clients and our ability to effectively manage the project and deploy appropriate resources, including third-party contractors and our own personnel, in a timely manner. We may commit to a client that we will complete a project by a scheduled date. We may also commit that a project, when completed, will achieve specified performance standards. If the project is not completed by the scheduled date or fails to meet required performance standards, we may either incur significant additional costs or be held responsible for the costs incurred by the client to rectify damages due to late completion or failure to achieve the required performance standards. The uncertainty of the timing of a project can present difficulties in planning the amount of personnel needed for the project. If the project is delayed or canceled, we may bear the cost of an underutilized workforce that was dedicated to fulfilling the project. In addition, performance of projects can be affected by a number of factors beyond our control, including:

To the extent these events occur, the total costs of the project could exceed our estimates, and we could experience reduced profits or, in some cases, incur a loss on a project, which may reduce or eliminate our overall profitability. Further, any defects or errors, or failures to meet our clients’ expectations, could result in claims for damages against us. Failure to meet performance standards or complete performance on a timely basis could also adversely affect our reputation.

The outcome of pending and future claims and litigation could have a material adverse impact on our business, financial condition and results of operations.

We are a party to claims and litigation in the normal course of business. Since we engage in testing, inspection, engineering and other activities for large facilities and projects where design, construction or systems failures can result in substantial injury or death of employees or others or in damage to property, we are exposed to claims and litigation and investigations if there is a failure at any such facility or project. Such claims could relate to, among other things, personal injury, loss of life, business interruption, property damage, pollution and environmental damage and be brought by our clients or third parties, such as those who use or reside near our clients’ projects. We can also be exposed to claims if we agreed that a project will achieve certain performance standards or satisfy certain technical requirements and those standards or requirements are ultimately not met. In many of our contracts with clients, subcontractors and vendors, we agree to retain or assume potential liabilities for damages, penalties, losses and other exposures relating to projects that could result in claims that greatly exceed the anticipated profits relating to those contracts. In addition, while clients and subcontractors may agree to indemnify us against certain liabilities, such third parties may refuse or be unable to pay us if such indemnification obligations arise.

State and other public employee unions may bring litigation that seeks to limit the ability of public agencies to contract with private firms to perform government employee functions in the area of public improvements. Judicial determinations in favor of these unions could affect our ability to compete for contracts and may have an adverse effect on our financial results.

State and other public employee unions have challenged the validity of propositions, legislation, charters, and other government regulations that allow public agencies to contract with private firms to provide services in the fields of engineering, design, and construction of public improvements that might otherwise be provided by public employees. These challenges could have the effect of eliminating or severely restricting the ability of municipalities to hire private firms and otherwise require them to use union employees to perform the services. If a state or other public employee union is successful in its challenge, this may result in additional litigation which could affect our ability to compete for contracts.

Our credit agreements contain a number of restrictive covenants which could limit our ability to finance future operations, acquisitions or capital needs or engage in other business activities that may be in our interest.

On February 25, 2021, Atlas Intermediate, as the borrower, entered into two new credit facilities, as described further in Note 17 – Subsequent Events. The credit agreements include a number of customary negative covenants. Such covenants, among other things, limit or restrict the ability of each of Holdings, Atlas Intermediate and all of their direct and indirect subsidiaries to:

These restrictions are subject to certain exceptions including (i) the ability to incur additional indebtedness, liens, investments, dividends and distributions, and prepayments of junior indebtedness subject, in each case, to compliance with certain financial metrics and/or certain other conditions and (ii) a number of other traditional exceptions that grant the Company continued flexibility to operate and develop its business.

In addition, the credit agreements also require Holdings, Atlas Intermediate and all of their direct and indirect subsidiaries on a consolidated basis to comply with certain financial ratio covenants, including a total net leverage ratio, which is tested on a quarterly basis, and a fixed charge coverage ratio, which is tested on a quarterly basis if our revolving loan balance is greater than $0 or our outstanding letters of credit are $5.0 million or more. Our ability to comply with these ratios may be affected by events beyond our control. These restrictions could limit our ability to plan for or react to market or economic conditions or meet capital needs or otherwise restrict our activities or business plans, and could adversely affect our ability to finance our operations, acquisitions, investments or strategic alliances or other capital needs or to engage in other business activities that would otherwise be in our interest. A breach of any of these covenants or our inability to comply with the required financial ratios could result in a default under our debt instruments. If an event of default occurs, our creditors could elect to declare all borrowings outstanding, together with accrued and unpaid interest, to be immediately due and payable, terminate any existing commitments to lend and foreclose on any of our assets securing their loans. Any such acceleration or termination of commitments could have a material adverse effect on our financial position and ability to conduct our business.

Variable rate indebtedness subjects us to interest rate risk, which could cause our debt service obligations to increase significantly.

Borrowings under the Atlas 2021 Credit Agreements (described further in Note 17 – Subsequent Events) bear interest at variable rates, exposing us to interest rate risk. If the interest rates increase, our debt service obligations on the variable rate indebtedness would increase even though the amount borrowed would remain the same, and our results of operations and cash flows for servicing our indebtedness would decrease.

Risks Related to Our Common Stock

Our quarterly results may fluctuate significantly, which could have a material negative effect on the price of our Class A common stock.

Our quarterly operating results may fluctuate due to several factors, including:

If our quarterly operating results fluctuate significantly, causing our operating results to fall below the expectations of securities analysts, the price of our Class A common stock may decrease substantially, which could have a material negative impact on our financial condition and results of operations.

We are an “emerging growth company” and are thus able to avail ourselves of reduced disclosure requirements applicable to emerging growth companies, which could make our common stock less attractive to investors.

We are an “emerging growth company,” as defined in the Jumpstart Our Business Startups Act of 2012 (the “JOBS Act”), and we intend to take advantage of certain exemptions from various reporting requirements that are applicable to other public companies that are not “emerging growth companies,” including not being required to comply with the auditor attestation requirements of Section 404(b) of Sarbanes-Oxley, reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements and exemptions from the requirements of holding a nonbinding advisory vote on executive compensation and shareholder approval of any golden parachute payments not previously approved. In addition, pursuant to Section 107 of the JOBS Act, as an “emerging growth company” we intend to take advantage of the extended transition period provided in Section 7(a)(2)(B) of the Securities Act of 1933, as amended (the “Securities Act”) for complying with new or revised accounting standards. In other words, an “emerging growth company” can delay the adoption of certain accounting standards until those standards would otherwise apply to private companies.

We cannot predict if investors will find our common stock less attractive because we may rely on these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may be more volatile. We may take advantage of these reporting exemptions until we are no longer an “emerging growth company.” We will remain an “emerging growth company” until the earliest of (i) the last day of the fiscal year in which we have total annual gross revenues of $1.07 billion or more; (ii) the last day of our fiscal year following the fifth anniversary of the date of our initial public offering; (iii) the date on which we have issued more than $1 billion in nonconvertible debt during the previous three years; or (iv) the date on which we are deemed to be a large accelerated filer under the rules of the SEC.

We may be required to take write-downs or write-offs, restructuring and impairment or other charges that could have a significant negative effect on our financial condition, results of operations and stock price, which could cause you to lose some or all of your investment.

Although we conducted due diligence prior to the Atlas Business Combination, we cannot assure you that this diligence revealed all material issues that may be present in our business, that it would be possible to uncover all material issues through a customary amount of due diligence, or that factors outside of our control will not later arise. As a result, the Company may be forced to later write-down or write-off assets, restructure our operations, or incur impairment or other charges that could result in losses. Even if the due diligence successfully identified certain risks, unexpected risks may arise and previously known risks may materialize in a manner not consistent with our preliminary risk analysis. Even though these charges may be non-cash items and not have an immediate impact on our liquidity, the fact that the Company reports charges of this nature could contribute to negative market perceptions about the Company or our securities. In addition, charges of this nature may cause the Company to violate net worth or other covenants to which we may be subject. Accordingly, our stockholders could suffer a reduction in the value of their shares. Such stockholders are unlikely to have a remedy for such reduction in value unless they are able to successfully claim that the reduction was due to the breach by our officers or directors of a duty of care or other fiduciary duty owed to them, or if they are able to successfully bring a private claim under securities laws that the proxy solicitation or tender offer materials, as applicable, relating to the Atlas Business Combination contained an actionable material misstatement or material omission.

To the extent that shares of Class A common stock are issued pursuant to the terms of the Holdings LLC Agreement, the number of shares eligible for resale in the public market will increase.

Pursuant to the terms of the Holdings LLC Agreement, the Continuing Members may redeem any or all of the shares of Class B common stock issued to them along with a corresponding number of Holdings Units, for an equal number of shares of Class A common stock.

To the extent that any shares of Class A common stock are issued pursuant to the terms of the Holdings LLC Agreement, there will be an increase in the number of shares of Class A common stock eligible for resale in the public market. Sales of a substantial number of such shares in the public market could adversely affect the market price of our Class A common stock.

If we raise capital in the future by issuing shares of common or preferred stock or other equity or equity-linked securities, convertible debt or other hybrid equity securities, our then existing stockholders may experience dilution, such new securities may have rights senior to those of our common stock, and the market price of our common stock may be adversely effected.

 If we raise capital in the future our then existing stockholders may experience dilution. Our second amended and restated certificate of incorporation (our “Charter”) provides that preferred stock may be issued from time to time in one or more series. Our board of directors (“Board”) is authorized to fix the voting rights, if any, designations, powers, preferences, the relative, participating, optional or other special rights and any qualifications, limitations and restrictions thereof, applicable to the shares of each series. Our Board may, without stockholder approval, issue preferred stock with voting and other rights that could adversely affect the voting power and other rights of the holders of the shares of common stock and could have anti-takeover effects. For example, the Board might grant holders of a class or series of our preferred stock the right to elect some number of our directors in all events or on the happening of specified events or the right to veto specified transactions. The ability of our Board to issue preferred stock without stockholder approval could have the effect of delaying, deferring or preventing a change of control of us or the removal of existing management. Similarly, the repurchase or redemption rights or liquidation preferences the Board might assign to holders of our preferred stock could affect the residual value of our common stock. The issuance of any such securities may have the impact of adversely affecting the market price of our common stock.

The issuance of additional stock as consideration for acquisitions will dilute existing stockholdings and may have an adverse effect on the market price of our common stock.

On February 26, 2021, we entered into a definitive agreement to acquire Atlantic Engineering Laboratories, Inc. and Atlantic Engineering Laboratories of NY, Inc. The purchase price for the acquisition includes an equity component that consists of a number of shares of Class A common stock equal to $7,750,000.00 divided by the arithmetic average of the daily VWAP of the Class A common stock for the 20 consecutive trading days immediately prior to the closing of the acquisition, subject to customary adjustments for levels of cash, indebtedness and net working capital. The issuance of our Class A common stock as consideration for the acquisition of Atlantic Engineering Laboratories, Inc. and Atlantic Engineering Laboratories of NY, Inc., or any future acquisition, will result in dilution of our existing stockholders and may adversely affect the market price of our common stock.

Provisions in our Charter and Delaware law may have the effect of discouraging lawsuits against our directors and officers.

Our Charter requires, unless we consent in writing to the selection of an alternative forum, that (i) any derivative action or proceeding brought on our behalf, (ii) any action asserting a claim of breach of a fiduciary duty owed by any director, officer or other employee to us or our stockholders, (iii) any action asserting a claim against us, our directors, officers or employees arising pursuant to any provision of the DGCL or our Charter or our second amended and restated bylaws, or (iv) any action asserting a claim against us, our directors, officers or employees governed by the internal affairs doctrine may be brought only in the Court of Chancery in the State of Delaware, except any claim (A) as to which the Court of Chancery of the State of Delaware determines that there is an indispensable party not subject to the jurisdiction of the Court of Chancery (and the indispensable party does not consent to the personal jurisdiction of the Court of Chancery within ten days following such determination), (B) which is vested in the exclusive jurisdiction of a court or forum other than the Court of Chancery, (C) for which the Court of Chancery does not have subject matter jurisdiction, or (D) any action arising under the Securities Act, as to which the Court of Chancery and the federal district court for the District of Delaware shall have concurrent jurisdiction. If an action is brought outside of Delaware, the stockholder bringing the suit will be deemed to have consented to service of process on such stockholder’s counsel. Although we believe this provision benefits us by providing increased consistency in the application of Delaware law in the types of lawsuits to which it applies, a court may determine that this provision is unenforceable, and to the extent it is enforceable, the provision may have the effect of discouraging lawsuits against our directors and officers, although our stockholders will not be deemed to have waived our compliance with federal securities laws and the rules and regulations thereunder.

Notwithstanding the foregoing, our Charter provides that the exclusive forum provision will not apply to suits brought to enforce a duty or liability created by the Exchange Act or any other claim for which the federal courts have exclusive jurisdiction. Section 27 of the Exchange Act creates exclusive federal jurisdiction over all suits brought to enforce any duty or liability created by the Exchange Act or the rules and regulations thereunder. Although we believe this provision benefits us by providing increased consistency in the application of Delaware law in the types of lawsuits to which it applies, the provision may have the effect of discouraging lawsuits against our directors and officers.

Provisions in our Charter may inhibit a takeover of us, which could limit the price investors might be willing to pay in the future for our Class A common stock and could entrench management.

Our Charter contains provisions that may discourage unsolicited takeover proposals that stockholders may consider to be in their best interests. These provisions include a staggered board of directors, the controlling provisions of the Nomination Agreement we entered into with Bernhard Capital Partners in connection with the Atlas Business Combination (the “Nomination Agreement”), a supermajority vote required to amend certain provisions of our Charter and the ability of the Board to designate the terms of, and issue new series of, preferred stock, which may make more difficult the removal of management and may discourage transactions that otherwise could involve payment of a premium over prevailing market prices for our securities.

Concentration of ownership of our common stock among certain large stockholders may prevent new investors from influencing significant corporate decisions or adversely affect the trading price of our common stock.

Holders of our common stock vote together as a single class on all matters presented to our stockholders for their vote or approval, except as otherwise required by applicable law or our Charter. Certain of our stockholders own large portions of the voting power of our common stock and as a result exercise significant influence over the outcome of certain matters requiring stockholder approval, including mergers and other material transactions, the composition of our Board or a change in control of the Company that could deprive our stockholders of an opportunity to receive a premium for their common stock as part of a sale of the Company. The existence of significant stockholders may also have the effect of deterring hostile takeovers, delaying or preventing changes in control or changes in management, or limiting the ability of our other stockholders to approve transactions that they may deem to be in the best interests of the Company.

So long as a small number of stockholders continues to control a significant amount of our common stock, they will continue to be able to strongly influence all matters requiring stockholder approval, regardless of whether or not other stockholders believe that a potential transaction is in their own best interests. In any of these matters, the interests of such stockholders may differ or conflict with the interests of our other stockholders. In addition, our significant stockholders and their affiliates, as well as members of our Board, may, from time to time, acquire interests in businesses that directly or indirectly compete with our business, as well as businesses that are significant existing or potential customers. Moreover, this concentration of stock ownership may also adversely affect the trading price of our common stock to the extent investors perceive a disadvantage in owning stock of a company with a concentrated stock ownership.

The market price of our common stock may be affected by low trading volume.

Although a trading market for our Class A common stock exists on the NASDAQ, the trading volume has not been significant, due in part to a substantial number of our outstanding shares of our common stock being subject to contractual lock-ups and other legal restrictions. Additionally, a large percentage of our common stock is currently made up of Class B common stock, which is not listed on a public exchange but is exchangeable (along with Holdings Units) for shares of Class A common stock. When trading volume is low, significant price movement can be caused by the trading in a relatively small number of shares. Low volume can also reduce liquidity, which could adversely affect the market price of our shares of common stock.

If securities or industry analysts adversely change their recommendations regarding our Class A common stock or if our operating results do not meet their expectations, our stock price could decline.

The trading market for our Class A common stock will be influenced by the research and reports that industry or securities analysts publish about us or our business. If one or more of these analysts cease coverage of the Company or fail to publish reports on us regularly, we could lose visibility in the financial markets, which in turn could cause our stock price or trading volume to decline. Moreover, if one or more of the analysts who cover the Company downgrades our Class A common stock, or if our operating results do not meet their expectations, our stock price could decline. 

There can be no assurance that we will be able to comply with the continued listing standards of NASDAQ.

Our continued eligibility for listing on NASDAQ depends on a number of factors. If NASDAQ delists the Class A common stock from trading on its exchange for failure to meet the listing standards, we and our stockholders could face significant material adverse consequences including:

General Risk Factors

Negative conditions in the credit and financial markets and delays in receiving client payments could result in liquidity problems, increasing our cost of borrowing and adversely affecting our business.

Although we finance much of our operations using cash provided by operations, at times we depend on the availability of credit to grow our business and help fund acquisitions. Instability in the credit markets in the U.S. or abroad could cause credit to be relatively difficult or expensive to obtain at competitive rates, on commercially reasonable terms or in sufficient amounts. This situation could make it more difficult or more expensive for us to access funds, refinance our existing indebtedness, enter into agreements for new indebtedness or obtain funding through the issuance of securities, or such additional capital may not be available on terms acceptable to us or at all. We may also enter into business acquisition agreements that require us to access credit, which if not available at the closing of the acquisition could result in a breach of the acquisition agreement and a resulting claim for damages by the sellers of such business. In addition, market conditions could negatively impact our clients’ ability to fund their projects and, therefore, utilize our services, which could have a material adverse impact on our business, financial condition and results of operations.

Some of our customers, suppliers and subcontractors depend on access to commercial financing and capital markets to fund their operations. Disruptions in the credit or capital markets could adversely affect our clients’ ability to finance projects and could result in contract cancellations or suspensions, project delays and payment delays or defaults by our clients. In addition, clients may be unable to fund new projects, may choose to make fewer capital expenditures or otherwise slow their spending on our services or to seek contract terms more favorable to them. Our government clients may face budget deficits that prohibit them from funding proposed and existing projects or that cause them to exercise their right to terminate our contracts with little or no prior notice. In addition, any financial difficulties suffered by our subcontractors or suppliers could increase our cost or adversely impact project schedules. These disruptions could materially negatively impact our backlog and have a material adverse impact on our business, financial condition and results of operations.

Cybersecurity breaches of our systems and information technology could adversely impact our ability to operate.

We need to protect our own and our clients’ internal trade secrets and other confidential business information from disclosure. We face the threat to our computer systems of unauthorized access, computer hackers, computer viruses, malicious code, organized cyberattacks and other security problems and system disruptions, including possible unauthorized access to our and our clients’ proprietary, classified or confidential information. We rely on industry-accepted security measures and technology to securely maintain all confidential and proprietary information on our information systems. We have devoted and will continue to devote significant resources to the security of our computer systems, but they are still vulnerable to these threats. A user who circumvents security measures can misappropriate confidential or proprietary information, including information regarding us, our personnel and/or our clients, or cause interruptions or malfunctions in operations. As a result, we can be required to expend significant resources to protect against the threat of these system disruptions and security breaches or to alleviate problems caused by these disruptions and breaches. There has been an overall increase in the frequency and sophistication of the cyber and security threats we face, with attacks ranging from those common to businesses generally to those that are more advanced and persistent, which may target us because we hold sensitive information. As a result, we and our vendors face a heightened risk of a security breach or disruption resulting from an attack by computer hackers, foreign governments, and cyber terrorists. While we put in place policies, controls and technologies to help detect and protect against such attacks, we cannot guarantee that future incidents will not occur, and if an incident does occur, we may not be able to successfully mitigate the impact. We have been the target of these types of attacks in the past and future attacks are likely to occur. If successful, these types of attacks on our network or other systems or service failures could have a material adverse effect on our business, financial condition and results of operations, due to, among other things, the loss of client or proprietary data, interruptions or delays in our clients’ businesses and damage to our reputation. In addition, the failure or disruption of our systems, communications, vendors, or utilities could cause us to interrupt or suspend our operations, which could have a material adverse effect on our business, financial condition and results of operations. In addition, if our employees inadvertently do not adhere to appropriate information security protocols, our protocols are inadequate, or our employees intentionally avoid these protocols, our or our clients’ sensitive information may be released, thereby causing significant negative impacts to our reputation and exposing us or our clients to liability. Any of these events can damage our reputation and have a material adverse effect on our business, financial condition, results of operations and cash flows.

We rely on third-party internal and outsourced software to run our critical accounting, project management and financial information systems. As a result, any sudden loss, disruption or unexpected costs to maintain these systems could significantly increase our operational expense and disrupt the management of our business operations.

We rely on third-party software to run our critical accounting, project management and financial information systems. We also depend on our software vendors to provide long-term software maintenance support for our information systems. Software vendors may decide to discontinue further development, integration or long-term software maintenance support for our information systems, in which case we may need to abandon one or more of our current information systems and migrate some or all of our accounting, project management and financial information to other systems, thus increasing our operational expense as well as disrupting the management of our business operations.

Changes in tax laws could increase our tax rate and materially affect our results of operations.

We are subject to tax laws in the U.S. A new presidential administration and a new Congress recently took office in the United States. It is not yet known what changes Congress, working with the President, will make to existing tax laws and how those changes (if any) will affect the economy, our business, results of operations, financial condition and cash flows. These and other changes in tax laws and regulations could increase our effective tax rate and harm our results of operations.

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

ITEM 2. PROPERTIES

Our principal executive office, which is leased, is located at 13215 Bee Cave Parkway, Building B, Suite 230, Austin, Texas 78738.

ITEM 3. LEGAL PROCEEDINGS

From time to time, we are subject to various legal proceedings that arise out of our normal course of business or otherwise. We are not currently a party to any legal proceedings that, individually or in the aggregate, are expected to materially impact our business, financial position, results of operations and cash flows, taken as a whole.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Information

Our Class A common stock is listed on the Nasdaq under the symbol “ATCX.”

Holders of Record

As of March 17, 2021, there were approximately 37 holders of record of our Class A common stock and 90 holders of record of our Class B common stock.

Dividends

We have not paid any cash dividends on our common stock to date and did not pay cash dividends prior to the completion of the Atlas Business Combination. The payment of cash dividends in the future will be dependent upon our revenues and earnings, if any, capital requirements and general financial condition. The payment of any cash dividends will be within the discretion of the Board at such time. In addition, the Board is not currently contemplating and does not anticipate declaring any stock dividends in the foreseeable future. Further, under the terms of our debt agreements, our ability to declare dividends is restricted.

Unregistered Sales of Equity Securities

None.

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

Neither we, nor any affiliated purchaser, purchased any of our equity securities during the quarter ended December 31, 2020. 

ITEM 6. SELECTED FINANCIAL DATA

Not required.

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following discussion and analysis should be read in conjunction with our audited financial statements and accompanying notes included herein. This discussion contains “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. All statements contained in this Annual Report on Form 10-K other than statements of historical fact, including statements regarding our future operating results or financial position, our business strategy and plans, and our objectives for future operations, are forward-looking statements. Actual results and the timing of events may differ materially from those contained in these forward-looking statements due to a number of factors. Factors that could cause or contribute to such differences include, but are not limited to, economic and competitive conditions, regulatory changes and other uncertainties, as well as those factors included in this Annual Report on Form 10-K, all of which are difficult to predict. In light of these risks, uncertainties and assumptions, the forward-looking events discussed may not occur. We assume no obligation to update any of these forward-looking statements.

For purposes of this section, “we,” “us,” “our,” the “Company” and “Atlas” refers to Atlas Technical Consultants, Inc. (formerly named Boxwood Merger Corp.) and its subsidiaries. The Atlas Business Combination  (as defined below) was accounted for as a reverse recapitalization where the Company was the legal acquirer but treated as the accounting acquiree. All references to operations prior to the Atlas Business Combination reflect the results of Atlas Intermediate Holdings LLC, a Delaware limited liability company (“Atlas Intermediate”) and its subsidiaries. Since Atlas Intermediate was determined to be the accounting acquirer, the information included below will include the results of Atlas Intermediate and its subsidiaries through the Atlas Business Combination and will include the Company, including Atlas Intermediate, for transactions occurring after the Atlas Business Combination.

OVERVIEW

Since becoming a public company in February 2020, we continued to execute on our growth strategy by completing three strategic acquisitions, and we improved our capital structure through (i) a warrant exchange in the fourth quarter of 2020 and (ii) a recapitalization of our debt and redemption in full of our preferred equity in the first quarter of 2021. We incurred significant expenses related to the Atlas Business Combination and our initial formation as a public company. COVID-19 also had negative impacts on our operations during 2020 but we took steps to mitigate the impacts through cost control measures. Our utilization rates improved over the course of the year from the lows initially experienced at the onset of the pandemic, as we continued to work towards pre-COVID operating levels.

Our growth during 2020 was fueled in large part by contracts with various Departments of Transportation that continued throughout the COVID-19 pandemic, as well as our acquisitions of LONG, Alta Vista and WesTest. Our backlog has grown to $628 million at the end of the year and in February 2021, we announced our entry into a definitive agreement (subject to customary closing conditions) to acquire Atlantic Engineering Laboratories, Inc. and Atlantic Engineering Laboratories of NY, Inc. The combination of organic growth and acquisitions remains integral to our expansion plans, particularly as it relates to potential increases in federal and state transportation, infrastructure and environmental spending.

Atlas Technical Consultants, Inc. (the “Company”, “We”, or “Atlas” and formerly named Boxwood Merger Corp. (“Boxwood”)) was a blank check company, incorporated in Delaware on June 28, 2017. The Company was formed for the purpose of acquiring, through a merger, capital stock exchange, asset acquisition, stock purchase, reorganization, recapitalization, or other similar business transaction, one or more operating businesses or assets.

On February 14, 2020 (the “Closing Date”), the Company consummated its acquisition of Atlas Intermediate pursuant to the Unit Purchase Agreement, dated as of August 12, 2019, as amended on January 22, 2020 (the “Purchase Agreement”), by and among the Company, Atlas TC Holdings LLC, a wholly-owned subsidiary of the Company and a Delaware limited liability company (“Holdings”), Atlas TC Buyer LLC, a wholly-owned subsidiary of Holdings and a Delaware limited liability company, Atlas Intermediate and Atlas Technical Consultants Holdings LP, a Delaware limited partnership (the “Seller”). The acquisition of Atlas Intermediate pursuant to the Purchase Agreement together with the other transactions contemplated by the Purchase Agreement is referred to herein as the “Atlas Business Combination.”

Following the consummation of the Atlas Business Combination, we are organized in an “Up-C” structure in which the business of Atlas Intermediate and its subsidiaries is held by Holdings and continues to operate through the subsidiaries of Atlas Intermediate, and in which our only direct assets consist of common units of Holdings (the “Holdings Units”). We are the sole manager of Holdings in accordance with the terms of the Amended and Restated Limited Liability Company Agreement of Holdings entered into in connection with the consummation of the Atlas Business Combination.

Headquartered in Austin, Texas, we are a leading provider of professional testing, inspection, engineering, environmental, program management and consulting services, offering solutions to public and private sector clients in the transportation, commercial, water, government, education, industrial, healthcare and power markets. With approximately 140 offices located throughout the United States, we provide a broad range of mission-critical technical services, helping our clients test, inspect, certify, plan, design and manage a wide variety of projects across diverse end markets.

We act as a trusted advisor to our clients, helping our clients design, engineer, inspect, manage and maintain civil and commercial infrastructure, servicing the existing structures as well as helping to build new structures. However, we do not perform any construction, and do not take any direct construction risk.

We provide a broad range of mission-critical technical services, ranging from providing inspection services in small projects to managing significant aspects of large, multi-year projects. For the year ended December 31, 2020, we:

We have long-term relationships with a diverse set of clients, providing a base of repeating clients, projects and revenues. Approximately 90% of our revenues are derived from projects that have used our services at least twice in the past three years and more than 95% of our revenues are generated from client relationships longer than 10 years, with greater than 25% of revenues generated from relationships longer than 30 years. Examples of such long-term customers include the Texas and Georgia Departments of Transportation, U.S. Postal Service, Gwinnett County Georgia, New York City Housing Authority, Stanford University, Port of Oakland, United Rentals, Inc., Speedway, Walmart, Inc., and Apple Inc.

Our broad base of customers spans a diverse set of end markets including the transportation, commercial, water, government, education, industrial, healthcare and power sectors. Our customers include government agencies, quasi-public entities, schools, hospitals, utilities and airports, as well as private sector clients across many industries.

Our services require a high degree of technical expertise, as our clients rely on us to provide testing, inspection and quality assurance services to ensure that structures are designed, engineered, built and maintained in accordance with building codes, regulations and the highest safety standards. As such, our services are delivered by a highly-skilled, technical employee base that includes scientists, engineers, inspectors and other field experts. As of December 31, 2020, our technical staff represented approximately 80% of our approximately 3,200 employees. Our services are typically provided under contracts, some of which are long-term with long lead times between when contracts are signed and when our services are performed. As such, we have a significant amount of contracted backlog, providing for a high degree of visibility with respect to revenues expected to be generated from such backlog. As of December 31, 2020, our contracted backlog was estimated to be approximately $628 million. See “—Backlog” below for additional information relating to our backlog.

COVID-19 Pandemic 

The domestic and global crisis resulting from the outbreak of the COVID-19 pandemic, and the measures being taken to address and limit the spread of the virus, have adversely affected the U.S. economy and financial markets, resulting in an economic downturn that has negatively impacted the demand for our services. This crisis has affected our operations and liquidity in a number of ways. Project delays have negatively impacted our revenue, and if continued or exacerbated, could result in a material adverse effect to our business. Additionally, a prolonged downturn could ultimately result in an overall decrease in demand for our services. Although the pandemic has begun to show signs of subsiding during the first quarter of 2021 with the approval and dissemination of multiple COVID-19 vaccines and the lifting of pandemic-related restrictions in many states, we cannot currently predict with certainty the full extent to which our business, results of operations, financial condition or liquidity will ultimately be impacted. We will continue to monitor the safety of our employees during the COVID-19 pandemic, and we are evaluating, and will continue to evaluate, the impact of COVID-19 on our current projects. Our top priority is to protect our employees and their families, as well as our clients.

Recent Accounting Pronouncements

In February 2016, FASB issued ASU 2016-02, Leases. ASU 2016-02 requires lessees to recognize, in the balance sheet, a liability to make lease payments and a right-of-use asset representing the right to use the underlying asset over the lease term. The amendments in this accounting standard update are to be applied using a modified retrospective approach and are effective for fiscal years beginning after December 15, 2021. The Company is currently evaluating the requirements of ASU 2016-02 and its impact on the consolidated and combined financial statements.

In June 2016, the FASB issued ASU 2016-13, Financial Instruments (Topic 326) - Credit Losses: Measurement of Credit Losses on Financial Instruments, which provides guidance regarding the measurement of credit losses on financial instruments. The new guidance replaces the incurred loss impairment methodology in the current guidance with a methodology that reflects expected credit losses and requires consideration of a broader range of reasonable and supportable information to determine credit loss estimates. This ASU will be effective for the Company commencing after December 15, 2022. The Company is in the process of assessing the impact of this ASU on our consolidated financial statements and disclosures.

See Note 2. “Summary of Significant Accounting Policies,” to the Consolidated Financial Statements for a description of the recent accounting pronouncements.

HOW WE EVALUATE OUR OPERATIONS

We use a variety of financial and other information in monitoring the financial condition and operating performance of our business. Some of this information is financial information that is prepared in accordance with generally accepted accounting principles (“GAAP”), while other information may be financial in nature and may not be prepared in accordance with GAAP. Historical information is periodically compared to budgets, as well as against industry-wide information. We use this information for planning and monitoring our business, as well as in determining management and employee compensation.

We evaluate our overall business performance based primarily on a combination of four financial metrics: revenue, backlog, adjusted EBITDA and liquidity measures. These are key measures used by our management team and Board to understand and evaluate our operational performance, to establish budgets and to develop short and long-term operational goals.

Revenue

Revenues for services are derived from billings under contracts (which are typically of short duration) that provide for specific time, material and equipment charges, or lump sum payments and are reported net of any taxes collected from customers. We recognize revenue as it is earned at estimated collectible amounts.

Revenue is recognized as services are performed and amounts are earned in accordance with the terms of a contract. We generally contract for services to customers based on either hourly rates or a fixed fee. In such contracts, our efforts, measured by time incurred, typically are provided in less than a year and represent the contractual milestones or output measure, which is the contractual earnings pattern. For contracts with fixed fees, we recognize revenues as amounts become billable in accordance with contract terms, provided the billable amounts are consistent with the services delivered and are earned. Expenses associated with performance of work may be reimbursed with a markup depending on contractual terms. Revenues include the markup, if any, earned on reimbursable expenses. Reimbursements include billings for travel and other out-of-pocket expenses and third-party costs, such as equipment rentals, materials, subcontractor costs and outside laboratories, which is included in cost of revenues in the accompanying combined statement of income.

Backlog

We analyze our backlog, which we define as fully awarded and contracted work or revenue we expect to realize for work completed, to evaluate operations and future revenue potential. Our contracted backlog includes revenue we expect to record in the future from signed contracts. In order to calculate backlog, we determine the amounts for contracted projects that are fully funded, and then determine the respective revenues expected to be realized upon completion of work. We use backlog to evaluate Company revenue growth as it typically follows growth in backlog. As backlog is not a defined accounting term, our computation of backlog may not be comparable with that of our peers.

Adjusted EBITDA

We view adjusted EBITDA, which is a non-GAAP financial measure, as an important indicator of performance. We define adjusted EBITDA as net income before interest expense, provision for income taxes, depreciation and amortization, further adjusted to reflect non-cash equity compensation as well as certain one-time or non-recurring items.

We believe adjusted EBITDA is a useful performance measure because it allows for an effective evaluation of our operating performance when compared to our peers, without regard to our financing methods or capital structure. We exclude the items listed above from net income in arriving at adjusted EBITDA because these amounts are either non-recurring or can vary substantially within the industry depending upon accounting methods and book values of assets, capital structures and the method by which the assets were acquired. Adjusted EBITDA should not be considered as an alternative to, or more meaningful than, net income determined in accordance with GAAP. Certain items excluded from adjusted EBITDA are significant components in understanding and assessing a company’s financial performance, such as a company’s cost of capital and tax structure, as well as the historic costs of depreciable assets, none of which are reflected in adjusted EBITDA. Our presentation of adjusted EBITDA should not be construed as an indication that results will be unaffected by the items excluded from adjusted EBITDA. Our computations of adjusted EBITDA may not be identical to other similarly titled measures of other companies.

The following table presents reconciliations of adjusted EBITDA to net income, our most directly comparable financial measure calculated and presented in accordance with GAAP.

COMPONENTS AND FACTORS AFFECTING OUR OPERATING RESULTS

Revenue

We generate revenue primarily by providing infrastructure-based testing, inspection, certification, engineering, and compliance services to a wide range of public- and private-sector clients. Our revenue consists of both services provided by our employees and pass-through fees from subcontractors and other direct costs.

Cost of Revenue

Cost of revenue reflects the cost of personnel and specifically identifiable costs associated with revenue.

Operating Expense

Operating expense includes corporate expenses, including personnel, occupancy, and administrative expenses, including depreciation and amortization.

Interest Expense

Interest expense consists of contractual interest expense on outstanding debt obligations including amortization of deferred financing costs and other related financing expenses.

Income Tax Expense

Following the consummation of the Atlas Business Combination, we are organized in an “Up-C” structure in which the business of Atlas Intermediate and its subsidiaries is held by Holdings and will continue to operate through the subsidiaries of Atlas Intermediate, and in which our only direct assets consist of common units of Holdings. We are the sole manager of Holdings in accordance with the terms of the Holdings LLC Agreement entered into in connection with the consummation of the Atlas Business Combination.

Previously, Atlas Intermediate was treated as a partnership for federal and state income tax purposes with all income tax liabilities and/or benefits of the Company being passed through to the partners and members. As such, no recognition of federal or state income taxes have been provided for in the accompanying consolidated financial statements with the exception of income taxes relating to the C-Corp subsidiaries directly owned by Atlas Intermediate and the State of Texas Margin tax.

Subsequent to the Atlas Business Combination, income taxes relating to the C-Corps owned directly by Atlas Intermediate and the State of Texas Margin tax are considered within the provision of non-controlling interest as it is generated through the results of Atlas Intermediate and its subsidiaries.

Net Income (loss) From Continuing Operations

Net income from continuing operations reflects our operating income after taking into account costs and expenses for a given period, while excluding any gain or loss from discontinued operations.

Loss From Discontinued Operations

Loss from discontinued operations includes our non-recurring gains or losses realized in connection with the disposition of an asset or component of the business that results in discontinued operations.

Provision for Non-controlling Interest

Our ownership and voting structure is comprised of holders of our Class A common stock that participate 100% in the results of Atlas Technical Consultants, Inc. and 36.4% in Atlas Intermediate and its subsidiaries and holders of our Class B common stock that participate in the results of Atlas Intermediate and its subsidiaries until their Class B common stock is converted to Class A common stock. The holders of our Class B common stock participate in 63.6% of Atlas Intermediate and its subsidiaries. In connection with the Atlas Business Combination, it was determined that the results of Atlas Intermediate and its subsidiaries would be fully consolidated within the results of the Company.

Due to the participation of the holders of our Class B common stock in the results of Atlas Intermediate and subsidiaries, a non-controlling interest was deemed to exist. Consolidated net income includes earnings attributable to both the shareholders and the non-controlling interests.

The provision for non-controlling interest relates to pre-tax income subsequent to the Atlas Business Combination and includes a pro-rata share of taxes as federal and state income taxes relating to the C-Corps directly owned by Atlas Intermediate and the State of Texas Margin tax as it is generated through the results of Atlas Intermediate and its subsidiaries.

Upon the close of the Atlas Business Combination, the holders of our Class B common stock participated in 80.6% of the results of Atlas Intermediate and its subsidiaries. This percentage has declined over the course of the year due to the exchange of Atlas Intermediate units, together with Class B common shares, for Class A common shares and the exchange of our public and private placement warrants for Class A common shares during November and December 2020 as a result of our tender offer and warrant exchange.

Redeemable Preferred Stock Dividends

On February 14, 2020, in connection with the consummation of the Atlas Business Combination, Holdings and GSO COF III AIV-2 LP (“GSO AIV-2”) entered into a subscription agreement (the “Subscription Agreement”) pursuant to which GSO AIV-2 purchased 145,000 units of a new class of Series A Senior Preferred Units of Holdings (the “Preferred Units”) at a price per Preferred Unit of $978.21, for an aggregate cash purchase price of $141,840,450, which represented a 2.179% original issue discount on the Preferred Units (such purchase, the “GSO Placement”).

The GSO Placement was made pursuant to the exemption from registration contained in Section 4(a)(2) of the Securities Act of 1933, as amended (the “Securities Act”), and/or Regulation D promulgated thereunder.

On February 25, 2021, the Company, in its capacity as the managing member of Holdings, entered into Amendment No. 1 to the Holdings LLC Agreement to allow Holdings, at the direction of the Board, to redeem all of the Preferred Units at any time using the proceeds from the refinancing of the Atlas Credit Agreement and entry into the Atlas 2021 Credit Agreements described in Note 17 – Subsequent Events.

On February 25, 2021, following the execution of Amendment No. 1 to the Holdings LLC Agreement, Holdings elected to redeem all of the 145,000 Preferred Units then outstanding and held by GSO AIV-2 for $1,084.96 per Preferred Unit for a total redemption price of $157,371,024.84 (the “Redemption”). Following the Redemption, (i) the Preferred Units are no longer deemed outstanding, (ii) all dividends on the Preferred Units ceased to accrue, and (iii) all rights of the holders thereof as holders of Preferred Units ceased and terminated, except for the right to receive payment under the Redemption.

Net Income (loss) Attributable to Class A Common Stock (Previously Members)

Net income (loss) attribution to holders of our Class A common stock represents our results after the provision for non-controlling interest, the effect of all taxes under the Up-C structure for the period subsequent to the Atlas Business Combination, and dividends due on redeemable preferred stock.

Net income (loss) for the historical results of Atlas Intermediate prior to the Atlas Business Combination are also reported within this line item.

RESULTS OF OPERATIONS

Consolidated Results of Operations

The following table represents our selected results of operations for the periods indicated (in thousands, except per share data).

Comparison of the year ended December 31, 2020 to 2019:

Revenue

Revenue for the year ended December 31, 2020 decreased by $2.8 million, or 1%, to $468.2 million as compared to $471.0 million for the corresponding prior year period. The decrease in revenue for the year ended December 31, 2020 was due to effects of the COVID-19 pandemic on our operations, offset, in part, by current year acquisitions and organic growth in certain regions.

COVID-19 affected our operations through: (i) shelter-in-place orders and similar restrictions along the West Coast and Eastern seaboard, (ii) accessibility to client facilities throughout the country, whether related to the client’s closure of facilities due to safety protocols or their efforts to reduce visitor interaction as a means of protecting their employees and (iii) project start delays.  The total impact of COVID-19 was a revenue reduction of $34.8 million for the year ended December 31, 2020. 

The Company was able to temper the full effect of COVID-19 through acquisitions and organic growth within its existing platform.  Acquisitions provided $21.7 million of revenues for the year ended December 31, 2020.  Our existing platform contributed $10.3 million of additional revenues primarily through two significant infrastructure projects that supported the nation’s security interests in the amount of $4.6 million of increased revenues in comparison to prior year, and our strategic expansion into the Texas market, which added an additional $2.9 million in comparison to prior year.

The Company also entered into a new service offering during 2019 benefitting our national clients that leveraged our nationwide platform.  We continued to see robust demand during 2020 from additional clients.  This resulted in $1.0 million of increased revenues during the year ended December 31, 2020 as compared to the year prior.

Cost of Revenue

Cost of revenue for the year ended December 31, 2020 decreased $14.0 million, or 5%, to $245.7 million, as compared to $259.7 million for the corresponding prior year period. The decrease in cost of revenues was partially due to the decrease in revenues, but the percentage decrease was higher than the revenue decrease of 1% due to the fact that we are cross selling our services which reduces our use of outside contractors and that COVID-19 served to significantly reduce pass through travel and consumables costs in comparison to prior year. The reduction in travel was a result of our efforts to protect our employees from unnecessary exposure to the virus and client actions to limit our access to facilities as previously discussed. The reduction in consumables related to our environmental testing activities, as those services were affected by reduced access to client facilities as previously discussed.

Cost of revenue, as a percentage of revenue, decreased to 52.5% from 55.1% for the year ended December 31, 2020 when compared to the year ended December 31, 2019, as we earn higher revenues from self-performed work.

Operating Expense

Operating expense for the year ended December 31, 2020 increased by $32.9 million, or 17%, to $224.8 million as compared to $191.9 million for the corresponding prior year period. For the year ended December 31, 2020, operating expense, as a percentage of revenue, increased to 48.0% from 40.7% for the year ended December 31, 2019.

The increase in operating expense for the year ended December 31, 2020 was primarily attributable to the consummation of the Atlas Business Combination, as the Company expensed $7.5 million of acquisition related costs and $12.0 million of costs incurred with change of control provisions contained within employment agreements and our former Management Incentive Plan. The Company also incurred $5.4 million of additional intangible amortization expense in comparison to the prior year due to new intangibles resulting from current year acquisitions as well as the acceleration of amortization associated with its Trade Name intangible assets, as the Company has sought to use the Atlas name in lieu of the acquired company’s legacy name in marketing and legal documents. The remainder of the increase was attributable to legal, accounting and insurance costs related to our status as a newly public company.

Interest Expense

Interest expense for the year ended December 31, 2020 increased by $14.8 million, or 150%, to $24.7 million, as compared to $9.9 million for the corresponding prior year period. The increase in interest expense is due to higher borrowings and interest rates in comparison to the prior year and higher amortization of deferred financing fees for the Atlas Credit Agreement in comparison to the Atlas Credit Facility.

Income Tax Expense

Income tax expense for the year ended December 31, 2020 was $0.7 million, compared to income tax expense of $1.3 million for the year ended December 31, 2019. The decrease in income tax expense was primarily due to the impacts of COVID-19 on our operations that are organized as C-Corps based in Northern California.

Loss From Discontinued Operations

Loss from discontinued operations was $0.0 million and $0.1 million for the years ended December 31, 2020 and 2019, respectively. We closed the Power & Industrial (P&I) business unit in late 2018 with some closing transactions recorded in early 2019.

Provision for Non-controlling Interest

The provision for non-controlling interest for the year ended December 31, 2020 was $16.6 million. The provision is new for fiscal year 2020 as there was a reverse recapitalization created by the Atlas Business Combination whereby the holders of our Class B common stock only share in the results of Atlas Intermediate and its subsidiaries based upon their ownership percentage in relation to total common stockholders. This treatment is effective from the Atlas Business Combination throughout the conversion of Class B common stock to Class A common stock.

Redeemable Preferred Stock Dividends

Redeemable preferred stock dividends for the year ended December 31, 2020 increased by $16.2 million, or 100%, to $16.2 million from $0.0 million for the year ended December 31, 2019. This increase is due to $141.8 million of redeemable preferred stock that we issued in connection with the Atlas Business Combination.

LIQUIDITY AND CAPITAL RESOURCES

Our primary sources of liquidity and capital resources are our cash and cash equivalents balances, cash flow from operations, borrowings under the Atlas 2021 Credit Agreements (as defined below), and access to financial markets. Our principal uses of cash are operating expenses, working capital requirements, capital expenditures, repayment of debt and acquisition expenditures. We believe our sources of liquidity, including cash flow from operations, existing cash and cash equivalents and borrowing capacity under the Atlas 2021 Credit Agreements will be sufficient to meet projected cash requirements for at least the next twelve months. We continue to assess our business operations and the impact that COVID-19 may have on our financial results and liquidity. Due to the effect of the COVID-19 pandemic and related project delays, during fiscal year 2020 we experienced a reduction in revenues and our cash flows in comparison to the previous comparable period. We will continue to monitor our capital requirements to ensure our needs are in line with available capital resources and we will continue to monitor the impact of COVID-19 on our liquidity. We believe that we have adequate liquidity resources for the next twelve months.

Other than the impact on cash flows from operations relating to the decrease in revenues relating to COVID-19, we have not experienced other liquidity decreases.

Cash Flows

The following table sets forth our cash flows for the periods indicated.

Comparison of the year ended December 31, 2020 to the year ended December 31, 2019

Cash and Cash Equivalents.

At December 31, 2020 and 2019, we had $14.1 million and $20.2 million of cash and cash equivalents, respectively. Due to the fact that our operating companies closed their books on December 25, 2020, the Friday closest to December 31, 2020, as disclosed in Note 1- Organization and Basis of Presentation to our audited financial statements as of and for the year ended December 31, 2020, we collected $8.9 million of net cash from December 26, 2020 through December 31, 2020 that was applied to outstanding receivable balances. This did not affect our working capital as of December 31, 2020 or our cash flows generated from operating activities for the year ended December 31, 2020. However, this would increase our liquidity to $39.0 million as of December 31, 2020.

Operating Activities

Cash flow from operating activities is primarily generated from operating income from our professional and technical testing, inspection, engineering, environmental, program management and consulting services.

Net cash provided by operating activities was $15.5 million for the year ended December 31, 2020, compared to $31.5 million for the year ended December 31, 2019. The decrease of $16.0 million was due to payments of accounts payable and accrued expenses mainly relating to costs associated with the Atlas Business Combination and other public company costs.

Investing Activities

Net cash used in investing activities was ($23.6) million for the year ended December 31, 2020, compared to ($9.6) million for the year ended December 31, 2019. The $14.0 million increase in cash used was related to our current year acquisitions of LONG, Alta Vista and WesTest in the amount of $20.4 million, offset, in part, by lower capital expenditures in 2020 versus 2019 and a purchase in 2019 of a New York state engineering license in the amount of $2.0 million that did not recur in 2020. Capital expenditures were lower for 2020 in comparison to prior year due to the development of a general ledger software platform at one of our operating companies.

Financing Activities

Net cash provided by financing activities was $2.0 million for the year ended December 31, 2020, compared to ($8.2) million used during the year ended December 31, 2019. The $10.2 million increase in net cash provided by financing activities was primarily due to the issuance of common stock in the amount of $10.2 million as a result of the Atlas Business Combination. Also during the current year we paid preferred dividends associated with our redeemable preferred stock in the amount of ($6.6) million, offset, in part, by a payment of contingent consideration in the amount of ($5.1) million during the year ended December 31, 2019 that did not recur in 2020. The payment of redeemable preferred stock dividends also is a result of the Atlas Business Combination and was expected to be a recurring use of cash until the extinguishment of the redeemable preferred stock in February 2021.

The Company raised additional money during 2020 through the Atlas Credit Agreement, described herein, and the issuance of redeemable preferred stock which was used to pay a distribution to the former owners of Atlas Intermediate, acquire LONG and pay off the Atlas Credit Facility.

Working Capital

Working capital, or current assets less current liabilities, increased by $0.7 million, or 1.0%, to $92.8 million at December 31, 2020 from $92.1 million at December 31, 2019. This increase in working capital is primarily due to the contributions from our LONG, Alta Vista and WesTest acquisitions collectively in the amount of $9.9 million during the current year, offset, in part, by deferrals of employer payroll taxes allowed for by the CARES Act in the amount of $4.1 million and an increase in short term debt of $3.2 million, which resulted from the change in debt agreements upon the consummation of the Atlas Business Combination.

Debt Arrangements

In March 2019, subsequent to the merger with ATC Group Partners (“ATC”), we repaid all outstanding balances on the combined entity’s loan agreements in full and terminated our prior loan agreements. These loan agreements were replaced with a term loan of $145.0 million and a revolving credit facility of $50.0 million, of which $31.8 million was funded at closing (the “Atlas Credit Facility”). Proceeds of the Atlas Credit Facility were used to repay existing debt of $123.9 million and fund a shareholder distribution of $52.8 million made in April 2019.

The Atlas Credit Facility was secured by assets of Atlas Intermediate. The Atlas Credit Facility required quarterly principal payments of $2.719 million through March 31, 2023, and then $3.625 million until the final maturity in March 2024, and bore interest at an annual rate of LIBOR plus a margin ranging from 275 to 425 basis points determined by the Company’s Consolidated Leverage Ratio, as defined in the Atlas Credit Facility. For the interest payment made in the quarter ended December 31, 2019, the applicable margin was 375 basis points and the total interest rate was 5.500%. 

The Atlas Credit Facility was scheduled to mature in March 2024. However, in connection with the consummation of the Atlas Business Combination, the Atlas Credit Facility was repaid and we entered into a new credit arrangement (the “Atlas Credit Agreement”) with Macquarie Capital Funding LLC (the “Lender” or “Lead Arranger”). The Atlas Credit Agreement provided for a term loan (the “Term Loan”) in the amount of $281.0 million and revolving letter of credit (the “Revolver”) in the amount of $40.0 million, of which $24.0 million was drawn upon through December 31, 2020. The term loan proceeds were used to repay the existing Atlas Credit Facility in the amount of $171.0 million and partially fund the Atlas Business Combination and the acquisition of LONG.

Under the terms of the Atlas Credit Agreement, the Term Loan and Revolver were set to expire on February 14, 2027 and February 14, 2025, respectively. However, the Atlas Credit Agreement was repaid on February 25, 2021 in connection with the entry into the Atlas 2021 Credit Agreements described below. Interest was payable monthly or at the end of the applicable interest period in arrears on any outstanding borrowings. The interest rates under the Atlas Credit Agreement equaled either (i) Adjusted LIBOR (as defined in the Atlas Credit Agreement), plus 4.75%, or (ii) an Alternate Base Rate (as defined in the Atlas Credit Agreement), plus 3.75%.

The Atlas Credit Agreement was guaranteed by Holdings and secured by (i) a first priority pledge of the equity interests of subsidiaries of Holdings and Atlas Intermediate and (ii) a first priority lien on substantially all other assets of Holdings, Atlas Intermediate and all of their direct and indirect subsidiaries.

On March 31, 2020, the terms of the Atlas Credit Agreement were modified to reduce the maturity of the Term Loan by one year to February 14, 2026 from February 14, 2027. The interest rate for the Term Loan was increased to (i) Adjusted LIBOR Rate as defined in the Atlas Credit Agreement, plus 6.25%, or (ii) an Alternate Base Rate as defined in the Atlas Credit Agreement, plus 5.25%. The interest rate for the Revolver was increased to (i) Adjusted LIBOR Rate as defined in the Atlas Credit Agreement, plus 5.0%, or (ii) an Alternate Base Rate as defined in the Atlas Credit Agreement, plus 4.0%. The modification also increased the rate of amortization applicable to the Term Loan to 5.0% per annum (commencing on June 30, 2020).

The modifications to the Atlas Credit Agreement resulted from the exercise of the market-flex rights by the Lead Arranger in connection with the syndication process, which, in addition, required the payment of an upfront fee in an amount equal to 2% of the currently outstanding Term Loans, which was subsequently paid in April 2020. The market-flex rights were included in the Atlas Credit Agreement and were exercised by the Lead Arranger upon completion of the time period allowed to complete a syndication process.

The Company has been in compliance with the terms of the Atlas Credit Facility and Atlas Credit Agreement as of December 31, 2020 and 2019, respectively.

Our debt balances are summarized as follows:

The following table presents, in millions, scheduled maturities of the Company’s debt as of December 31, 2020:

Our average effective interest rate on our total debt, exclusive of amortization of deferred debt issuance costs, during the year ended December 31, 2020 and 2019 was 7.0% and 6.0%, respectively.

Interest expense, inclusive of amortization of deferred debt issuance costs, in the consolidated statements for the year ended December 31, 2020 and 2019 was $24.7 million and $9.9 million, respectively.

On February 25, 2021, Atlas Intermediate, as the borrower, entered into two new credit facilities consisting of (i) a $432.0 million senior secured term loan at closing and, subject to the satisfaction of certain terms and conditions, a committed delayed draw term loan facility in an aggregate principal amount of up to $75.0 million and an uncommitted incremental term loan facility that may be incurred after closing (the “2021 Term Loan”) pursuant to a Credit Agreement dated February 25, 2021, by and among Holdings, Atlas Intermediate, Wilmington Trust, National Association, as administrative agent and collateral agent, and certain lenders thereto, including certain Blackstone entities, which may include, Blackstone Alternative Credit Advisors LP, and its managed funds and accounts, and its affiliates, Blackstone Holdings Finance Co. L.L.C. and its affiliates, and/or certain other of their respective funds, accounts, clients managed, advised or sub-advised, or any of their respective affiliates (the “2021 Term Loan Agreement”) and (ii) a $40.0 million senior secured revolver which aggregate principal amount may be increased, subject to the satisfaction of certain terms and conditions, including obtaining commitments therefor, by up to $20,000,000 (the “2021 Revolver”) pursuant to that certain Credit Agreement dated February 25, 2021, by and among Holdings, Intermediate, JPMorgan Chase Bank, N.A., as administrative agent, swingline lender, issuing bank, lender, sole bookrunner and sole lead arranger (the “2021 ABL Revolver Agreement,” and together with the 2021 Term Loan Agreement, collectively the “Atlas 2021 Credit Agreements”).

The initial 2021 Term Loan will mature on February 25, 2028 and the 2021 Revolver will mature on February 25, 2026.

Interest on any outstanding borrowings is payable monthly under the 2021 ABL Revolver Agreement, quarterly under the 2021 Term Loan Agreement or, in each case, at the end of the applicable interest period in arrears. The cash interest rates under the 2021 Term Loan Agreement will be equal to either (i) the Adjusted LIBO Rate (as defined in the 2021 Term Loan Agreement), plus 5.50%, or (ii) an Alternate Base Rate (as defined in the 2021 Term Loan Agreement), plus 4.50%. The interest rates under the 2021 ABL Revolver Agreement will be equal to either (i) the Adjusted LIBO Rate (as defined in the 2021 ABL Revolver Agreement), plus 2.50%, or (ii) the ABR (as defined in the 2021 ABL Revolver Agreement), plus 1.50%.

The Atlas 2021 Credit Agreements are guaranteed by Holdings and secured by (i) in the case of the 2021 ABL Revolver Agreement, a first priority security interest in the current assets, including accounts receivable, of Holdings, Intermediate and its subsidiaries and (ii) in the case of the 2021 Term Loan Agreement, a pledge of the equity interests of the subsidiaries of Holdings and Intermediate, and subject to the first lien security interest on current assets under the 2021 Revolver, a first priority lien on substantially all other assets of Holdings, Intermediate and all of their direct and indirect subsidiaries.

The 2021 Term Loan Agreement contains a financial covenant which requires Holdings, Atlas Intermediate and all of their direct and indirect subsidiaries on a consolidated basis to maintain a Total Net Leverage Ratio (as defined in each of the Atlas 2021 Credit Agreements) tested on a quarterly basis that does not exceed (i) 8.25 to 1.00 with respect to the fiscal quarters ending on April 2, 2021 and July 2, 2021, (ii) 8.00 to 1.00 for the fiscal quarters ending October 1, 2021 and December 31, 2021, (iii) 7.50 to 1.00 for the fiscal quarters ending April 1, 2022 and July 1, 2022, (iv) 7.25 to 1.00 for the fiscal quarters ending September 30, 2022 and December 30, 2022, (v) 7.00 to 1.00 for the fiscal quarters ending March 31, 2023 and June 30, 2023, (vi) 6.75 to 1.00 for the fiscal quarters ending September 29, 2023 and December 29, 2023, and (vii) 6.50 to 1.00 for March 29, 2024 and each fiscal quarter ending thereafter.

The 2021 ABL Revolver Agreement contains a “springing” financial covenant which requires Holdings, Intermediate and all of their direct and indirect subsidiaries on a consolidated basis to maintain a Fixed Charge Coverage Ratio (as defined in the 2021 ABL Revolver Agreement) of no less than 1.10 to 1.00 when the outstanding principal amount of loans under the 2021 Revolver exceeds $0 or the aggregate exposure for letters of credit under the 2021 Revolver exceeds $5 million.

Other Commitments and Contingencies

In connection with our acquisitions during the year ended December 31, 2020, we may be required to pay earnout bonuses upon the achievement of certain performance targets. This amount may be paid in installments over the first, second and third anniversaries of the acquisition. We have currently accrued $3.1 million and $15.1 million as the fair value of that liability within other current and other long-term liabilities, respectively, within our Consolidated Balance Sheet at December 31, 2020, which is temporary and subject to finalization.

In November 2020, we entered into a financing arrangement of our business-related insurance policies and the amount remaining is $4.5 million as of December 31, 2020.

The Company enters into operating leases relating to office space and equipment leases in the ordinary course of business. Remaining amounts due, in millions, as of December 31, 2020 are as follows:

During 2020, the Company entered into an agreement with its fleet management company pursuant to which it would receive rebates of $1.3 million to be repaid over three years at an interest rate of 2.85% per annum. The rebates were secured by title to selected vehicles within the Company’s owned fleet of vehicles in Georgia and California.

Remaining payments are as follows:

Off-Balance Sheet Arrangements

As of December 31, 2020, we had no material off-balance sheet arrangements.

Effects of Inflation

Based on the analysis of the periods presented, we believe that inflation has not had a material effect on our operating results. There can be no assurance that future inflation will not have an adverse impact on our operating results and financial condition.

Critical Accounting Policies and Estimates

The preparation of consolidated financial statements and related disclosures in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, disclosure of contingent assets and liabilities at the date of the financial statements, and income and expenses during the periods reported. Actual results could materially differ from those estimates. We have identified the following critical accounting policies:

Revenue Recognition

Our accounting policies establish principles for recognizing revenue upon the transfer of control of promised goods or services to customers. We generally recognize revenues over time as performance obligations are satisfied. In the course of providing these services, we may subcontract for services and incur other direct costs on behalf of our clients. These costs are passed through to clients, and in accordance with accounting rules, are included in our revenue and cost of revenue. Please refer to Note 2. “Summary of Significant Accounting Policies,” to the Consolidated Financial Statements for further information.

Recent accounting pronouncements

Management does not believe that any recently issued, but not yet effective, accounting standards, if currently adopted, would have a material effect on our financial statements.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Not required.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

This information appears following Item 15 of this report and is included herein by reference.

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

ITEM 9A. CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures

Disclosure controls are procedures that are designed with the objective of ensuring that information required to be disclosed in our reports filed under the Exchange Act, such as this report, is recorded, processed, summarized, and reported within the time period specified in the SEC’s rules and forms. Disclosure controls are also designed with the objective of ensuring that such information is accumulated and communicated to our management, including the chief executive officer and chief financial officer, as appropriate to allow timely decisions regarding required disclosure. Our management evaluated, with the participation of our current chief executive officer and chief financial officer (our “Certifying Officers”), the effectiveness of our disclosure controls and procedures as of December 31, 2020, pursuant to Rule 13a-15(b) under the Exchange Act. Based upon that evaluation, our Certifying Officers concluded that, as of December 31, 2020, our disclosure controls and procedures were effective.

We do not expect that our disclosure controls and procedures will prevent all errors and all instances of fraud. Disclosure controls and procedures, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the disclosure controls and procedures are met. Further, the design of disclosure controls and procedures must reflect the fact that there are resource constraints, and the benefits must be considered relative to their costs. Because of the inherent limitations in all disclosure controls and procedures, no evaluation of disclosure controls and procedures can provide absolute assurance that we have detected all our control deficiencies and instances of fraud, if any. The design of disclosure controls and procedures also is based partly on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions.

Management’s Report on Internal Controls Over Financial Reporting

As required by SEC rules and regulations implementing Section 404 of the Sarbanes-Oxley Act, our management is responsible for establishing and maintaining adequate internal control over financial reporting. Our internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of our financial statements for external reporting purposes in accordance with GAAP. Our internal control over financial reporting includes those policies and procedures that:

Because of its inherent limitations, internal control over financial reporting may not prevent or detect errors or misstatements in our financial statements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree or compliance with the policies or procedures may deteriorate. Management assessed the effectiveness of our internal control over financial reporting at December 31, 2020. In making these assessments, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control — Integrated Framework (2013). Based on our assessments and those criteria, management determined that we maintained effective internal control over financial reporting as of December 31, 2020.

This Annual Report on Form 10-K does not include an attestation report of internal controls from our independent registered public accounting firm due to our status as an emerging growth company under the JOBS Act.

Changes in Internal Control over Financial Reporting

There were no changes in our internal control over financial reporting (as such term is defined in Rules 13a-15(f) and 15d-15(f) of the Exchange Act) during the most recent fiscal quarter that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

ITEM 9B. OTHER INFORMATION

None.

PART III

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

Incorporated by reference from our definitive proxy statement for the 2021 Annual Meeting of Stockholders, to be filed within 120 days of our fiscal 2020 year end.

ITEM 11.  EXECUTIVE COMPENSATION

Incorporated by reference from our definitive proxy statement for the 2021 Annual Meeting of Stockholders, to be filed within 120 days of our fiscal 2020 year end.

ITEM 12.  SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDERS MATTERS

Incorporated by reference from our definitive proxy statement for the 2021 Annual Meeting of Stockholders, to be filed within 120 days of our fiscal 2020 year end.

ITEM 13.  CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

Incorporated by reference from our definitive proxy statement for the 2021 Annual Meeting of Stockholders, to be filed within 120 days of our fiscal 2020 year end.

ITEM 14.  PRINCIPAL ACCOUNTANT FEES AND SERVICES

Incorporated by reference from our definitive proxy statement for the 2021 Annual Meeting of Stockholders, to be filed within 120 days of our fiscal 2020 year end.

PART IV

ITEM 15.  EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

The following documents are filed as part of this report:

None.

We hereby file as part of this report the exhibits listed in the below Exhibit Index.

ATLAS TECHNICAL CONSULTANTS, INC.

INDEX TO FINANCIAL STATEMENTS

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Shareholders and the Board of Directors of Atlas Technical Consultants, Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of Atlas Technical Consultants, Inc. (a Delaware corporation) and subsidiaries (the “Company”) as of December 31, 2020 and 2019, the related consolidated statements of operations, changes in shareholders’ equity and members’ capital, and cash flows for each of the two years in the period ended December 31, 2020, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2020 and 2019, and the results of its operations and its cash flows for each of the two years in the period ended December 31, 2020, in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

/s/ GRANT THORNTON LLP

We have served as the Company’s auditor since 2017.

Houston, Texas

March 22, 2021

ATLAS TECHNICAL CONSULTANTS, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(in thousands, except per share data)

The accompanying notes are an integral part of these Consolidated Financial Statements.

ATLAS TECHNICAL CONSULTANTS, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS

(in thousands, except per share data)