AXCELIS TECHNOLOGIES INC - Annual Report: 2020 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

​

FORM 10-K

​

​

​

For the transition period from to

​

Commission file number 000-30941

​

AXCELIS TECHNOLOGIES, INC.

(Exact name of registrant as specified in its charter)

​

​

​

108 Cherry Hill Drive

Beverly, Massachusetts 01915

(Address of principal executive offices) (zip code)

​

(978) 787-4000

(Registrant’s telephone number, including area code)

​

Securities registered pursuant to Section 12(b) of the Act:

​

​

​

Securities registered pursuant to Section 12(g) of the Act:

None

​

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ⌧ No ◻

​

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ◻ No ⌧

​

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ⌧ No ◻

​

Indicate by checkmark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ⌧ No ◻

​

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

​

​

​

If an emerging growth company, indicate by check mark if registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ◻

​

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepare or issued its audit report. ⌧

​

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ⌧

​

Aggregate market value of the voting stock held by non-affiliates of the registrant as of June 30, 2020: $914,478,137

​

Number of shares outstanding of the registrant’s Common Stock, $0.001 par value, as of February 23, 2021: 33,732,089

​

Documents incorporated by reference:

​

Portions of the definitive Proxy Statement for Axcelis Technologies, Inc.’s Annual Meeting of Stockholders to be held on May 12, 2021 are incorporated by reference into Part III of this Form 10-K.

​

PART I

​

Item 1. Business.

​

Overview of Our Business

​

Axcelis Technologies, Inc. (“Axcelis,” the “Company,” “we,” “us,” or “our”) designs, manufactures and services ion implantation and other processing equipment used in the fabrication of semiconductor chips. We believe that our Purion family of products offers the most innovative implanters available on the market today. We sell to leading semiconductor chip manufacturers worldwide. The ion implantation business represented 96.3% of our revenue in 2020, with the remaining 3.7% of revenue derived from other legacy processing systems. In addition to equipment, we provide extensive aftermarket lifecycle products and services, including used tools, spare parts, equipment upgrades, maintenance services and customer training.

​

Axcelis’ business commenced in 1978 and its current corporate entity was incorporated in Delaware in 1995. We are headquartered in Beverly, Massachusetts and maintain an internet site at www.axcelis.com. On or through our website, investors may access, free of charge, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission. Our website and the information contained therein or connected thereto shall not be deemed to be incorporated into this Form 10-K.

​

2020 was an exceptional year for Axcelis despite the many difficult logistical challenges brought on by the geo-political environment and the pandemic. As a result of the strength of the overall electronics market and the continued growth of the Purion product family in 2020, we delivered our highest annual revenue in the last 15 years. Net income increased 193.4% on a 38.4% increase in revenue from the prior year. Revenue for 2020 was $474.6 million, an increase of 38.4% from 2019 revenue of $343.0 million. Systems revenue for 2020 was $293.6 million, compared to $202.6 million in 2019. Operating profit was $58.0 million in 2020, compared to $24.2 million in 2019. Net income for the year was $50.0 million with diluted earnings per share of $1.46. This compares to 2019 net income of $17.0 million and earnings per diluted share of $0.50.

​

The Company is in a strong competitive position as we participate in a period of extended industry growth. A focused strategy on ion implant, combined with the hard work and dedication of our employees and the encouragement and support of our customers and suppliers, enabled us to achieve numerous critical milestones in our drive to market leadership. In 2020, we continued to expand the Purion installed base, growing our large and diverse group of customers. We continued our focus on the mature process technology segment in 2020, launching both the Purion H200™ high current implanter, targeted for the production of power devices, and the Purion XEmax™ for image sensors. Through the introduction of new Purion product extensions and continuous cost reduction measures, we maintained our gross margin year over year, making this the third consecutive year with gross margin greater than 40 percent.

​

We continue to work diligently to ensure that manufacturing and operating expense levels remain well aligned to business conditions. We believe that the most fundamental interest of our stockholders is consistent, profitable, financial performance, which we expect to continue to deliver in 2021. Our performance is subject to risks and uncertainties discussed below under Item 1A Risk Factors.

​

Industry Overview

​

Semiconductor chips, also known as integrated circuits, are used in a continuously evolving range of consumer and industrial products, including for example, personal computers, mobile devices, automobiles, sensors and controllers for the “internet of things” and data storage servers. Types of semiconductor chips include dynamic random-access memory (“DRAM”) and “Not AND” (“NAND”) Flash memory; logic devices to process information; and “system on chip” devices (which have both logic and memory features). The increased number of devices providing information to and receiving information from the Internet, sometimes referred to as the “Connected World,” is increasing demand for chips. These chips are used in data input, such as image sensors, which are often manufactured using mature processing

2

technologies, as well as for memory to support the storage of data, internet streaming and “cloud computing” data analytics.

​

Most semiconductor chips are built on silicon wafers of either 200mm (8 inches) or 300mm (12 inches) in diameter. Each semiconductor chip is made up of millions of tiny transistors or “switches” to control the functions of the device. Transistors are created in the silicon wafer by introducing various precisely placed impurities into the silicon in specific patterns.

​

Semiconductor chip manufacturers own or manage wafer fabrication facilities (often referred to as “fabs”), which utilize many different types of equipment in the making of integrated circuits. Over 300 process steps utilizing over 50 different types of process tools are required to make a single device like a microprocessor. Semiconductor chip manufacturers seek device performance benefits through new products and technology enhancements and productivity improvements through increased throughput, equipment utilization and higher manufacturing yields. Capacity is added by increasing the amount of manufacturing equipment in existing fabrication facilities and by constructing new fabrication facilities.

​

We have different types of customers, which impacts the timing of purchases and technology requirements. Some customers are integrated electronics manufacturers, making semiconductor chips for their own devices. These same companies may also act as foundries, manufacturing chips for other electronic manufacturers or chip design companies. Some customers only function as foundries. A few companies design and manufacture branded chips that are sold to device manufacturers. In addition, some customers have partnerships or joint ventures with two or more semiconductor chip manufacturers to share the technology development and capital investment. The timing of purchases by foundry customers will depend on their success in securing manufacturing contracts. Also, foundry customers will look for equipment that can deliver the broadest capabilities in order to be prepared to manufacture all chip types, while integrated electronics manufacturers may invest in processing equipment dedicated to a specific application they require for their products.

​

The semiconductor capital equipment industry is cyclical, as global chip production capacities successively exceed, then lag behind, global chip demand. When chip demand is high, and inventories are low, chip manufacturers add capacity through capital equipment purchases. Given the difficulties of forecasting and calibrating chip demand and production capacity, the industry periodically experiences excess chip inventories and softening chip prices. Device manufacturers react with muted capital spending, lowering the demand for capital equipment. Changes in consumer and business demand for products in which chips are used also affect the industry. A successful semiconductor capital equipment manufacturer must not only provide some of the most technically complex products manufactured in the world but also must manage its business to thrive during low points in the cycle.

​

3

Axcelis’ Strategy

​

Axcelis’ 2021 strategic directives are:

​

We continue to invest in research and development to ensure our products meet the needs of our customers. We take pride in our scientists and engineers who are adding to our portfolio of patents and unpatented proprietary technology to ensure that our investment in technology leadership translates into unique product advantages. We strive for operational excellence by focusing on ways to lower our product, manufacturing and design costs and to improve our delivery times to our customers. Global Customer Teams and a focused account management structure maintain and strengthen our customer relationships and increase customer satisfaction. Finally, we endeavor to maintain a strong cash balance to ensure sufficient capital to fund business growth.

​

Ion Implantation Systems

​

Ion implantation is a principal step in the transistor formation cycle of the semiconductor chip manufacturing process. Ion implantation is also used to change the material characteristics of the silicon for reasons other than electrical doping, a process known as “material modification.” An ion implanter is a large, technically advanced system that injects dopants such as arsenic, boron or phosphorus into a wafer. These dopants are ionized and therefore have an electrical charge state. This electric charge state allows the dopants to be accelerated, focused and filtered with electric and magnetic fields. Ion implanters use these fields to create a beam of ions with a precisely defined energy level (ranging between several hundred and eight million electron-volts) and with a precisely defined beam current level (ranging from microamps to milliamps). Certain areas of the silicon wafer are blocked off by a polymer material known as photoresist, which acts as a “stencil” to pattern devices so that the dopants will only enter the wafer where needed. Typical process flows require twenty implant steps, with the most advanced processes requiring thirty or more steps. Each implant step is characterized by four key parameters: dopant type, dose (amount of dopant), energy (depth into the silicon) and tilt/twist (angle of wafer relative to the ion beam).

​

In order to efficiently cover the wide range of implant steps, three different types of implanters have been developed, each targeted at a specific range of applications, primarily defined by dose and energy. The three traditional implanter types are referred to as high current, high energy and medium current:

​

​

​

​

4

The Purion Platform and Family of Ion Implanters

​

Axcelis offers a complete line of high energy, high current and medium current implanters for all application requirements. Our Purion flagship systems are all based on a common platform which enables a unique combination of implant purity, precision and productivity. Combining a state-of-the-art single wafer end station, with advanced spot beam architectures (that ensures all points across the wafer see the same beam condition at the same beam angle), Purion products enable exceptional process control to optimize device performance and yield, at high productivity.

​

​

​

​

We believe our ion implant products will continue to meet customer demand for advantages in productivity, process performance and technical extendibility.

​

Aftermarket Support and Services

​

Through our Customer Satisfaction and Innovation (“CS&I”) business, we offer our customers extensive aftermarket service and support throughout the lifecycle of the equipment we manufacture. We believe that approximately 3,000 of our products are in use in 32 countries worldwide. The service and support that we provide includes used tools, spare parts, equipment upgrades, and maintenance services. We offer varying levels of sales, service and application support out of our field offices. Revenue generated through our CS&I business represented 38.1%, 40.9% and 36.6% of revenue in 2020, 2019 and 2018, respectively.

​

To support our aftermarket business, we have sales and marketing personnel, field service engineers, and spare parts and applications engineers, as well as employees located at our manufacturing facilities who work with our customers to provide customer training and documentation, and product, process and applications support.

​

Most of our customers maintain spare parts inventories for our machines. In addition to our web-based spare parts management and replenishment tracking program, we offer a number of Business-to-Business options to support our customers’ parts management requirements. Our Axcelis Managed Inventory service offering provides the customer with full spares support through a parts consignment arrangement in which Axcelis retains responsibility for the complete supply chain. These services provide ease of use alternatives that reduce order fulfillment costs and improve cycle time, resulting in an expanded customer base for this service offering.

​

Sales and Marketing

​

We primarily sell our equipment and services through our direct sales force. We conduct sales and marketing activities from our sales offices located in the United States, Taiwan, South Korea, China, Singapore, Japan, Germany and Italy.

​

5

International revenue, including export sales from our U.S. manufacturing facilities to foreign customers and sales by foreign subsidiaries and branches, accounted for 89.3%, 89.4% and 87.7% of total revenue in 2020, 2019 and 2018, respectively. In 2020, 74% of our sales were denominated in U.S. dollars. See Note 17 to our Consolidated Financial Statements contained in Item 15 of this Form 10-K for a breakdown of our revenue and long-lived assets in the United States, Europe and Asia. See also Item 1A, “Risk Factors,” for information about risks attendant to our foreign operations.

​

Customers

​

In 2020, according to Gartner Inc., the top 20 semiconductor chip manufacturers accounted for approximately 90.4% of total semiconductor capital equipment spending, which increased from 88.2% in 2019. These manufacturers are from the largest semiconductor chip manufacturing regions in the world: the United States, Asia Pacific (Taiwan, South Korea, Singapore, Japan and China) and Europe.

​

Information on net sales to unaffiliated customers is included in Note 2 of Notes to Consolidated Financial Statements. For the year ended December 31, 2020, revenues from each of Samsung Electronics Co, Ltd. and Semiconductor Manufacturing International Corporation represented 10% or more of consolidated revenues. The loss of these customers would have a material adverse effect on our business.

​

Research and Development

​

Our industry continues to experience rapid technological change, requiring us to frequently introduce new products and enhancements. Our Beverly, Massachusetts Advanced Technology Center houses a process development laboratory with 12,500 square feet of class 10/100/1000 clean room for product demonstrations and process development and a 34,000 square feet customer training center. The Advanced Technology Center provides infrastructure and process capabilities that allow customers to test their unique process steps on our systems under conditions that substantially replicate the customers’ production environments. This facility also provides significant capability for our research and development efforts.

​

We devote a significant portion of our personnel and financial resources to research and development programs and seek to maintain close relationships with our customers to remain responsive to their product needs. We have also sought to reduce the development cycle for new products through a collaborative process whereby our engineering, manufacturing and marketing personnel work closely together with one another and with our customers at an earlier stage in the process. We use 3D, computer-aided design, finite element analysis and other computer-based modeling methods to test new designs.

​

Our expenses for research and development were $61.8 million, $53.9 million and $51.9 million in 2020, 2019 and 2018, respectively, or 13.0%, 15.7% and 11.7% of revenue, respectively.

​

Manufacturing

​

We manufacture products at our 417,000 square feet ISO 9001:2015 and ISO 14001:2015 certified plant in Beverly, Massachusetts. Our facility employs best in class manufacturing techniques, including lean manufacturing, six sigma controls and advanced inventory management, purchasing and quality systems.

​

Our clean manufacturing process uses class 1,000/10,000 space to facilitate most of our manufacturing requirements.

​

Our core competency in manufacturing and supply chain management is built around system assembly and testing, which remains an in-house capability due to the high degree of expertise and intellectual property associated with the process and design. Non-core work is sourced to global partners and includes items such as vacuum systems, wafer handling and commodity-level components. We continuously pursue outsourcing opportunities where the economics are justified, with a goal of enabling quality and margin improvement. Our supply chain team is globally focused and is

6

located in Beverly and Singapore. Customized and commercially available software solutions drive our planning, purchasing and inventory tracking process.

​

Our products are designed to be assembled and tested in a modular fashion, which facilitates our industry-recognized “ship-from-cell” process. Specially developed test stands, software and tooling provide the framework for this accelerated delivery process. Customers that choose ship-from-cell substantially improve their delivery times while receiving the same high level of quality provided by more traditional longer cycle integration techniques. Product margins and inventory turns also improve as a result of shorter factory cycle times and increased labor productivity.

​

Installation of our equipment is provided by factory and field teams. The process includes assembling the equipment at our installation site, and after it has been connected, recalibrating it to factory specifications.

​

Competition

​

The semiconductor industry is highly competitive and is characterized by a small number of participants ranging in size. Significant competitive factors in the semiconductor capital equipment market include price, cost of ownership, equipment performance, customer support, capabilities and breadth of product line.

​

In ion implantation, we mainly compete against Applied Materials, Inc. Axcelis and Applied Materials are the only ion implant manufacturers with a full range of implant products, as well as service and support infrastructures able to service our customers globally. Other non-U.S. players we compete with include Sumitomo Heavy Industries Ion Technology Co. Ltd. and Nissin Ion Equipment Co., Ltd in Japan, Advanced Ion Beam Technology, Inc. in Taiwan, as well as CETC Electronics Equipment Group Co., Ltd. in the Peoples Republic of China. Non-U.S. suppliers may have an advantage over U.S. suppliers under recently established U.S. export controls regulation for shipments to China.

​

Intellectual Property

​

We rely on patent, copyright, trademark and trade secret protection in the United States and in other countries, as well as contractual restrictions, to protect our proprietary rights in our products and our business. As of December 31, 2020, we had 235 active patents issued in the United States and 474 active patents granted in other countries, as well as 241 patent applications (38 in the United States and 203 in other countries) on file with various patent agencies worldwide. Patents are generally in effect for up to 20 years from the filing of the application.

​

We intend to file additional patent applications and grow our intellectual property portfolio as appropriate. Although patents are important to our business, we do not believe that we are substantially dependent on any single patent or any group of patents.

​

We have trademarks, both registered and unregistered, that are maintained to provide customer recognition for our products in the marketplace. Trademark registrations generally remain in effect as long as the trademarks are in use. From time to time, we enter into license agreements with third parties under which we obtain or grant rights to patented or proprietary technology. We do not believe that any of our licenses are currently material to us.

​

Backlog

​

Systems backlog, including deferred systems revenue, was $116.2 million and $99.3 million as of December 31, 2020 and 2019, respectively. We believe it is meaningful to investors to include deferred systems revenue as part of our backlog. Deferred systems revenue represents revenue that will be recognized in future periods based on prior shipments or customer prepayments. Our policy is to include in backlog only those system orders for which we have accepted purchase orders and are typically due to ship within six months. All orders are subject to cancellations or rescheduling by customers with limited or no penalties.

​

7

Backlog does not include orders received and fulfilled within a quarter. Our backlog at the beginning of a quarter typically does not include all orders required to achieve our sales objectives for that quarter. Backlog is not necessarily an indicator of future business trends because orders for services or parts received during the quarter are generally performed or shipped within the same quarter.

​

Bookings in the quarter ended December 31, 2020 were $131.5 million compared to $77.2 million in the quarter ended December 31, 2019.

​

Human Capital

​

As of December 31, 2020, we had 1,004 employees and 44 temporary staff worldwide, of which 727 work in North America, 262 in Asia and 59 in Europe. During 2020, our headcount increased by approximately 4% to support our increased business during the year. While the majority of our headcount is based in the U.S. at our main manufacturing facility in Beverly, MA, our business requires our presence where our customers are located around the world, resulting in Axcelis employees working in 32 different countries.

​

Our future success largely depends upon our continued ability to attract and retain highly skilled employees. We provide competitive compensation and benefits programs. In addition to salaries, these programs (which vary by country and region) include cash incentive programs and recognition bonuses, equity awards, an Employee Stock Purchase Plan, a 401(k) plan with a competitive employer match, healthcare and insurance benefits, health savings and flexible spending accounts, paid time off, family leave, family care resources, flexible work schedules, employee assistance programs, and tuition assistance. These programs all contribute to both attracting and retaining a highly skilled employee base, including those with critical leadership and industry skills and experience.

​

During 2020, our voluntary turnover rate was 6.5%, well below the worldwide technology industry (all reported) average of 13.1% reported in the Aon 2020 Salary Increase and Turnover Study — Second Edition, September 2020.

​

The success of our business is fundamentally connected to the well-being of our people. Accordingly, we are committed to the health, safety and wellness of our employees. We provide our employees and their families with access to health and wellness insurance and programs that offer choice where possible so they can customize their benefits to meet their needs and the needs of their families. In response to the COVID-19 pandemic, we implemented significant changes that we determined were in the best interest of our employees, as well as the communities in which we operate, and which comply with government regulations. This includes having those employees that could productively work from home do so, while implementing additional safety measures for employees continuing critical on-site work.

​

Axcelis is dedicated to building a diverse workforce, fostering a culture built on the principle of inclusion, and maintaining a workplace free from discrimination. We strongly believe that a diversity of experience, perspectives and backgrounds will lead to a better environment for our employees and better products for our customers. Axcelis’ commitment to diversity covers our Board of Directors, our leadership team and all teams and functions across our global locations.

​

We encourage you to review the “Focus on Diversity” report (located in the “Investors” and “About Us” sections of our Axcelis.com website) for more detailed information regarding diversity and inclusion at Axcelis. Nothing on our website, including our Focus on Diversity Report or sections thereof, shall be deemed incorporated by reference into this Annual Report.

​

Environmental

​

We are subject to environmental laws and regulations in the countries in which we operate that regulate, among other things: air emissions; water discharges; and the generation, use, storage, transportation, handling and disposal of solid and hazardous wastes produced by our manufacturing, research and development and sales activities. As with other companies engaged in like businesses, the nature of our operations exposes us to the risk of environmental liabilities, claims, penalties and orders.

8

​

We are proud of our commitment to improving our environment. We believe that our operations are in compliance with applicable environmental laws and regulations and that there are no pending environmental matters that would have a material impact on our business. We are ISO 9001:2015 and ISO 14001:2015 certified at our Beverly, MA facility.

​

Information about our Executive Officers

​

Mary G. Puma, 63, has been our President and Chief Executive Officer since January 2002, having served as Chairman from 2005 to 2015. From May 2000 until January 2002, Ms. Puma was our President and Chief Operating Officer. In 1998, she became General Manager and Vice President of the Implant Systems Division of Eaton Corporation, a global diversified industrial manufacturer. In May 1996, she joined Eaton as General Manager of the Commercial Controls Division. Prior to joining Eaton, Ms. Puma spent 15 years in various marketing and general management positions for General Electric Company. Ms. Puma is a director of Nordson Corporation and Semiconductor Equipment and Materials International (SEMI).

​

Kevin J. Brewer, 62, became our Executive Vice President and Chief Financial Officer in September 2013, having served as interim Chief Financial Officer beginning in June 2013. Mr. Brewer also manages our Global Operations. Mr. Brewer had been our Executive Vice President, Global Operations since 2008 and our Senior Vice President, Manufacturing Operations since May 2005, prior to which he had been Vice President of Manufacturing Operations since October 2002 and Director of Operations from 1999 to 2002. Prior to joining Axcelis in 1999, Mr. Brewer was Director of Operations, Business Jets at Raytheon Aircraft Company, a leading manufacturer of business and special mission aircraft owned by Raytheon Company, a manufacturer of defense, government and commercial electronics, as well as aircraft. Prior to that, Mr. Brewer held various management positions in operations and strategic planning in Raytheon Company’s Electronic Systems and Missile Systems groups.

​

Russell J. Low, Ph. D., 50, became our Executive Vice President, Global Customer and Engineering Operations effective January 1, 2021, having served as Executive Vice President, Engineering since joining Axcelis in October 2016. Prior to joining the Company, Dr. Low held the position of Vice President of Engineering, MOCVD Business Unit at Veeco Instruments since 2013, prior to which he was Veeco’s Senior Director of Engineering, Molecular Beam Epitaxy Business Unit beginning in 2012. From 2003 to 2012, Dr. Low held a number of positions at Varian Semiconductor Equipment Associates, most recently as Director of Technology. Prior to that, Dr. Low held engineering positions in the thermal processing and ion implant divisions of Applied Materials, Inc. from 1997 to 2003.

​

John E. Aldeborgh, 64, has been our Executive Vice President, Customer Operations since February 2013, having joined Axcelis in January 2013 as our Senior Vice President, Customer Operations. Mr. Aldeborgh submitted his resignation as an executive officer effective March 1, 2021, in connection with his retirement. Mr. Aldeborgh will continue to serve as a senior advisor to Dr. Low for some period following his retirement. Prior to joining Axcelis, Mr. Aldeborgh served as the Chief Executive Officer and President, and as a Director, of innoPad, Inc., a privately held manufacturer of Chemical Mechanical Planarization pads, since 2006. Mr. Aldeborgh served in various marketing and sales position at Varian Semiconductor Equipment Associates Inc. (an ion implantation systems business acquired by Applied Materials Inc. in 2011) from 2002 to 2005, including Vice President of Sales and Marketing. Prior to Varian, Mr. Aldeborgh served as President and Chief Operating Officer of Ebara Technologies, Inc., from 1998 to 2002. Mr. Aldeborgh also held various positions at Genus, Inc. from 1989 to 1998, including Executive Vice President and Chief Operating Officer.

​

William Bintz, 64, is our Executive Vice President, Product Development since November 2016. From 2011 until November 2016, Mr. Bintz served as Executive Vice President, Product Development, Engineering and Marketing. Prior to that, he served as Senior Vice President, Marketing beginning in September 2007, after joining Axcelis in early 2006 as Director of Marketing for curing and cleaning products and shortly thereafter becoming Vice President of Product Marketing. Prior to joining Axcelis, from 2002 Mr. Bintz was Product Director for Medium Current and High Energy Ion Implant System at Varian Semiconductor Equipment Associates, Inc. Before that, he was General Manager of the Materials Delivery Products Group at MKS Instruments, beginning in 1999, and General Manager of the Thermal Processing Systems Division at Eaton Corporation (now Axcelis) beginning in 1995.

9

​

Lynnette C. Fallon, 61, is our Executive Vice President, Human Resources/Legal and General Counsel, a position she has held since May 2005. Prior to that, Ms. Fallon was Senior Vice President HR/Legal and General Counsel since 2002, and Senior Vice President and General Counsel since 2001. Ms. Fallon has also been our corporate Secretary since 2001. Before joining Axcelis, Ms. Fallon was a partner in the Boston law firm of Palmer & Dodge LLP since 1992, where she was head of the Business Law Department from 1997 to 2001.

​

Douglas A. Lawson, 60, has been our Executive Vice President, Corporate Marketing and Strategy since November 2013, having joined Axcelis as Vice President Business Development in 2010, and holding the position of Senior Vice President of Strategic Initiatives beginning in 2011. Mr. Lawson also manages our Information Technology function. Prior to joining the Company in 2010, he held the position of General Manager of Luminus Devices from 2009 to 2010. He has over 30 years of experience in the technology industry, and has held numerous executive and technical positions at BTU International, PRI Automation, Digital Equipment and Intel.

​

10

Item 1A. Risk Factors.

​

Risks Related to Our Business and Industry

​

Set forth below and elsewhere in this Form 10-K and in other documents we file with the SEC are risks and uncertainties that could cause actual results to differ materially from the results contemplated by the forward-looking statements contained in this Form 10-K. It is not possible to predict or identify all such risk factors. Consequently, the following is not a complete discussion of all potential risks or uncertainties.

​

If semiconductor chip manufacturers do not make sufficient capital expenditures, our sales and profitability will be harmed.

​

New systems orders and used tool sales depend upon demand from semiconductor chip manufacturers who build or expand fabrication facilities. When the rate of construction or expansion of fabrication facilities declines, demand for our systems will decline, reducing our revenue. In addition, all or a portion of the demand for increased capacity may be satisfied by a semiconductor chip manufacturer’s ability to reconfigure and re-use equipment they already own. Revenue decline also hurts our profitability because our established cost structure and our continued investments in engineering, research and development and marketing necessary to develop new products and to maintain extensive customer service and support capabilities limit our ability to reduce expenses in proportion to declining sales.

​

If we fail to develop and introduce reliable new or enhanced products and services that meet the needs of semiconductor chip manufacturers, our results will suffer.

​

Rapid technological changes in semiconductor chip manufacturing processes require us to respond quickly to changing customer requirements. Our future success will depend in part upon our ability to develop, manufacture and successfully introduce new systems and product lines with improved capabilities. This will depend upon a variety of factors, including new product selection, timely and efficient completion of product design and development as well as manufacturing and assembly processes, product performance in the field and effective sales and marketing. In particular:

​

​

​

​

​

Our failure to meet any of these requirements will have a material adverse effect on our operating results and profitability.

​

A significant portion of our revenue depends on customers electing to buy aftermarket products and services from Axcelis.

​

Historically, a significant portion of our product revenue and all of our service revenue relates to our sale of “aftermarket” products and services, which include parts, consumables, upgrades, service contracts, and time and materials billings. Some of our customers purchase fewer aftermarket products and services, often training their own staff to maintain and service semiconductor capital equipment rather than relying on the equipment manufacturer for these services. In addition, we compete against third party parts suppliers for the sale of parts and consumables that are

11

not protected by patents or otherwise proprietary. To the extent our customers purchase parts and services from other vendors or provide their own system maintenance labor, our revenue and profitability will be less.

​

If we fail to compete successfully in the highly competitive semiconductor capital equipment industry, our sales and profitability will decline.

​

The ion implant segment is highly competitive and includes one company with substantially greater financial, engineering, manufacturing, marketing and customer service and support resources that may better position it to compete successfully, as well as several smaller companies that could provide innovative systems with technology that may have performance advantages. We expect our competitors to continue to improve the design and performance of their existing products and processes and to introduce new products and processes with improved price and performance characteristics. If we are unable to improve or introduce competing products when demanded by the markets, our business will be harmed. Finally, if we must lower prices to remain competitive without commensurate cost of goods savings, our gross margin and profitability will be adversely affected.

​

We are dependent on sales to a limited number of large customers; the loss of a significant customer or any reduction in orders from them could materially affect our sales.

​

Historically, we have sold a significant portion of our products and services to a limited number of semiconductor chip manufacturers. In 2020, our top ten customers accounted for 74.0% of our net sales, in comparison to 74.1% and 76.9% in 2019 and 2018, respectively. None of our customers have entered into a long-term agreement requiring it to purchase our products. Although the composition of the group comprising our largest customers has varied from year to year, the loss of a significant customer or any reduction or delays in orders from any significant customer will adversely affect us. Consolidation of semiconductor chip manufacturers may result in the loss of a customer.

​

Axcelis is subject to the risks of operating internationally: we derive a substantial portion of our revenue from outside the United States, especially from Asia.

​

We are substantially dependent on sales of our products and services to customers outside the United States. International sales, including export sales from our U.S. manufacturing facilities to non-U.S. customers and sales by our non-U.S. subsidiaries, accounted for 89.3% of total revenue in 2020. Asia dominates our international sales. Ion implanter system shipments to customers in Asia represented 90.4% of total system revenue in 2020. We anticipate that international sales will continue to account for a significant portion of our revenue. In particular, we expect that sales to Chinese customers (both global chip manufacturers and domestic Chinese chip manufacturers) will continue to increase in coming years, creating both risk and opportunity. Sales to Chinese customers represent a higher risk than some other international locations because of trade tensions between the United States government and the Chinese government, and other challenges reflecting China’s stage of development, including public health concerns and rapid growth. In 2020, the United States Commerce Department placed one of our major Chinese customers on the U.S. export controls Entity List. As a result, we are currently required to obtain export controls licenses for all shipments from the U.S. to this customer. This situation is currently delaying shipments and risking a decision by this customer (and potentially other Chinese customers) to change suppliers to non-US vendors, such as Advanced Ion Beam Technology, Inc., Nissin Ion Equipment Co., Ltd. and Sumitomo Heavy Industries Ion Technology Co., Ltd. In addition, a Chinese entity, known as CETC Electronics Equipment Group Co., Ltd., is developing ion implanters for the Chinese domestic market. The loss of a significant customer or any reduction or delays in our ability to ship to any significant customer will adversely affect us.

​

We source a substantial portion of our materials from outside of the United States. Because of our dependence upon international sales and our global supply chain, our results and prospects may be adversely affected by a number of factors, including:

​

12

​

Our dependence upon suppliers for many components and sub-assemblies could result in increased costs or delays in the manufacture and sale of our products.

​

We rely to a substantial extent on outside vendors to manufacture many of the components and sub-assemblies of our products. We obtain many of these components and sub-assemblies from a limited group of suppliers. Accordingly, based on situations outside of our control, we may be unable to obtain an adequate supply of required components on a timely basis, on price and other terms acceptable to us, or at all. In addition, we often quote prices to our customers and accept customer orders for our products before purchasing components and sub-assemblies from our suppliers. If our suppliers increase the cost of components or sub-assemblies, we may not have alternative sources of supply and may not be able to raise the price of our products to cover all or part of the increased cost of components, negatively impacting our gross margin.

​

The manufacture of some of these components and sub-assemblies is an extremely complex process and requires long lead times. As a result we could experience delays or shortages. If we are unable to obtain adequate and timely deliveries of our required components or sub-assemblies, we may have to seek alternative sources of supply or manufacture these components internally. This could delay our ability to manufacture or to ship our systems on a timely basis, causing us to lose sales, incur additional costs, delay new product introductions and suffer harm to our reputation.

​

Moreover, if actual demand for Axcelis’ products is different than expected, Axcelis may purchase more or fewer parts than necessary or incur costs for canceling, postponing or expediting delivery of parts. If Axcelis purchases inventory in anticipation of customer demand that does not materialize, or if customers reduce or delay orders, Axcelis may incur excess inventory charges.

​

Our international operations involve currency risk.

​

Substantially all of our sales are billed in U.S. dollars, thereby reducing the impact of fluctuations in foreign exchange rates on our results. We also pay almost all non-U.S. vendors providing materials, components and subassemblies to our U.S. factory in U.S. dollars. However, the aftermarket revenues of our non-U.S. subsidiaries, and most of the operating expenses of these non-U.S. subsidiaries, are received and incurred in local currencies. The translation of these operating results into U.S. dollars in our Consolidated Statement of Operations can result in other income (expense). Similarly, the translation of long-term asset and liability values to U.S. dollars are recorded in stockholders’ equity as an element of accumulated other comprehensive income (loss). Accordingly, fluctuations in exchange rates can impact reported revenues, expense, and profitability and asset values in our Consolidated Financial Statements. During the year ended December 31, 2020, approximately 26.0% of our revenue was derived in local currencies from foreign operations with this inherent risk. In addition, at December 31, 2020, our operations outside of the United States accounted for approximately 13.7% of our total assets, the majority of which was denominated in currencies other than the U.S. dollar.

​

We may not be able to maintain and expand our business if we are not able to hire, retain and integrate qualified personnel.

​

Our business depends on our ability to attract and retain qualified, experienced employees. There is substantial competition for experienced engineering, technical, financial, sales and marketing personnel in our industry. In particular, we must attract and retain highly skilled design and process engineers. Competition for such personnel is intense, particularly in the Boston metropolitan area, as well as in other locations around the world. If we are unable to

13

retain our existing key personnel, or attract and retain additional qualified personnel, we may from time to time experience insufficient levels of staffing to fully develop, manufacture and market our products and perform services for our customers. As a result, our growth could be limited or we could fail to meet our delivery commitments or experience deterioration in service levels or decreased customer satisfaction, all of which could adversely affect our financial results.

​

Our financial results may fluctuate significantly.

​

We derive our new systems revenue from the sale of a small number of expensive products to a relatively small number of customers. The selling prices on our ion implant and other legacy processing systems range from approximately $2.0 million to $8.0 million. We also sell used equipment in our aftermarket business. Each sale, or failure to make a sale, may have a significant effect on us in a particular quarter. In a given quarter, a number of factors can adversely affect our revenue and results, including changes in our product mix, increased fixed expenses per unit due to reductions in the number of products manufactured, and higher fixed costs due to increased levels of research and development and expansion of our worldwide sales and marketing organization. Our financial results also fluctuate based on gross profit realized on sales. A variety of factors may cause gross profit as a percentage of revenue to vary, including the mix and average selling prices of products sold, costs to manufacture and customize systems, warranty costs and impact of changes to inventory reserves. New product introductions may also affect our gross margin. Fluctuations in our financial results may have an adverse effect on the price of our common stock.

​

Our financial results may fall short of anticipated levels because forecasting revenue and profitability is complex and may be inaccurate.

​

Management may from time to time provide financial forecasts to investors. These forecasts are based on assumptions, which are believed to be reasonable when made, of the timing of system orders, system shipments, system acceptance and aftermarket revenue. Any of these assumptions can prove erroneous and the level of revenue recognizable in a particular quarter may vary from the forecast. Our lengthy sales cycle, coupled with customers’ competing capital budget considerations, make revenue difficult to predict. In addition, our backlog at the beginning of a quarter typically does not include all orders required to achieve our sales objectives for that quarter and is not a reliable indicator of our future sales. As a result, our revenue and operating results for a quarter depend on our shipping systems on previous orders as scheduled during that quarter, receiving customer acceptance of previously shipped products, and obtaining new orders for products and services to be provided within that same quarter. Any delay in, or cancellation of, scheduled shipments and customer acceptances or in revenue from new orders, including aftermarket revenue, could materially affect our financial results.

​

Accounting rules addressing revenue recognition add more complexity in forecasting quarterly revenue and profitability. Orders for our products usually contain multiple performance obligations that result in revenue deferral under generally accepted accounting principles. Due to the foregoing factors, investors should understand that our actual financial results for a quarter may vary significantly from our forecasts of financial performance for that quarter. Failure to meet forecasted financial performance may have an adverse effect on the price of our common stock.

​

The semiconductor industry is cyclical and we expect that demand for our products will increase and decrease, making it difficult to manage the business and potentially causing harm to our sales and profitability.

​

The semiconductor industry is cyclical, experiencing upturns when the demand for our products is high and downturns when our customers are not investing in new or expanded fabrication facilities. From time to time, inventory buildups in the semiconductor device industry produce an oversupply of semiconductors. This can cause a reduced demand for capital equipment such as our products, negatively impacting our sales and level of profitability. Our revenue can vary significantly from one point in the cycle to another, making it difficult to manage the business, both when revenue is increasing and when it is decreasing. In addition, a substantial portion of our operating expenses do not fluctuate with changes in volume. Significant decreases in revenue can therefore have a disproportionate effect on profitability. In addition, reduced demand for our products and services may require Axcelis to implement cost reduction efforts, including restructuring activities, which may adversely affect Axcelis’ ability to capitalize on opportunities that arise in the future.

14

Axcelis is exposed to risks related to cybersecurity threats and incidents.

In the conduct of our business, Axcelis collects, uses, transmits and stores data on information technology systems. This data includes confidential information belonging to Axcelis, our employees or our customers or other business partners, some of which is personally-identifiable information of individuals. As reported in the 2020 Verizon Data Breach Investigation Report, cyber-attacks in the manufacturing industries are largely financially motivated, although business espionage is the objective in a strong majority of the incidents. Axcelis has been and expects to continue to be subject to cybersecurity threats and incidents, including employee error or misuse; individual attempts to gain unauthorized access to information systems; and sophisticated and targeted measures known as advanced persistent threats, none of which have had a material impact on the Company to date. Axcelis devotes significant resources to network security, data encryption, employee training and other measures to protect our systems and data from unauthorized access or misuse. However, depending on their nature and scope, cybersecurity incidents could result in business disruption; the misappropriation, corruption or loss of confidential information and critical data (Axcelis’ and that of third parties); reputational damage; unnecessary expense; litigation with third parties; diminution in the value of Axcelis’ investment in research, development and engineering; data privacy issues; and increased cybersecurity protection and remediation costs. These adverse outcomes could negatively impact our revenues, expenses, profitability and asset values.

​

Axcelis is subject to risks associated with environmental, health and safety regulations.

​

Axcelis is subject to environmental, health and safety regulations in connection with its global business operations, including but not limited to: regulations related to the development, manufacture, shipping and use of its products; handling, discharge, recycling and disposal of hazardous materials used in its products or in producing its products; the operation of its facilities; and the use of its real property. The failure or inability to comply with existing or future environmental and safety regulations could result in: significant remediation or other legal liabilities; the imposition of penalties and fines; restrictions on the development, manufacture, sale, shipment or use of certain of its products; limitations on the operation of its facilities or ability to use its real property; and a decrease in the value of its real property. Axcelis could be required to alter its manufacturing and operations and incur substantial expense in order to comply with environmental, health and safety regulations. Any failure to comply with these regulations could subject Axcelis to significant costs and liabilities that could adversely affect Axcelis’ business, financial condition and results of operations.

​

Our financial condition and results of operations could be adversely affected by global pandemics.

​

Global pandemics, such as COVID-19, cause disruptions and restrictions on our operations and ability to travel, and similar disruptions and restrictions impacting our suppliers or customers could adversely affect our sales and operating results. Axcelis’ products rely on an extensive global supply chain, and shortages of certain parts could impact our ability to meet customers’ shipment expectations, negatively affecting our revenues. Such pandemics may drive changes in the demand for certain of our customers’ products, resulting in their delay or cancelation of purchases from us. The extent to which pandemics may impact our results will depend on future developments, which are highly uncertain and cannot be predicted, including the severity of COVID-19 and the duration of the current pandemic.

​

Our proprietary technology may be vulnerable to efforts by competitors to challenge or design around, potentially reducing our market share.

​

We rely on a combination of patents, copyrights, trademark and trade secret laws, non-disclosure agreements and other intellectual property protection methods to protect our proprietary technology. Despite our efforts to protect our intellectual property, our competitors may be able to challenge, design around or legitimately use the proprietary technology embedded in our systems or other technology or information used in our business. If this occurs, the value of our proprietary technology will be diminished. Our means of protecting our proprietary rights may not be adequate and our patents may not be sufficient to prevent others from using technology that is similar to or the same as our technology. Patents issued to us may be challenged and might be invalidated or circumvented and any rights granted under our patents may not provide adequate protection to us. Our competitors may independently develop similar technology, duplicate features of our products or design around patents that may be issued to us. As a result of these threats to our

15

proprietary technology, we may have to resort to costly litigation to enforce or defend our intellectual property rights. Finally, all patents expire after a period of time (in the U.S., patents expire 20 years from the date of filing of the patent application). Our market share could be negatively impacted by the invalidation or expiration of a patent which had created a barrier for our competitors.

​

Axcelis also has agreements with third parties for licensing of patented or proprietary technology with Axcelis as the licensor or the licensee. Termination of license agreements or claims of infringement with respect to such technology could have an adverse impact on our financial performance or ability to ship products with existing configurations.

​

We (or customers that we indemnify) might face intellectual property infringement claims or patent disputes that may be costly to resolve and, if resolved against us, could be very costly to us and prevent us from making and selling our systems.

​

From time to time, claims and proceedings may be asserted against us relative to patent validity or infringement matters. We typically agree to indemnify our customers from liability to third parties for intellectual property infringement arising from the use of our products in their intended manner. Therefore, we may receive notification from customers who believe that we owe them indemnification or other obligations related to infringement claims made against the customers by third parties. Our involvement in any patent dispute or other intellectual property dispute or action to protect trade secrets, even if the claims are without merit, could be very expensive and could divert the attention of our management. Adverse determinations in any litigation could subject us to significant liabilities to third parties, require us to remove certain features from our products or seek costly licenses from third parties or prevent us from manufacturing and selling our systems. In addition, infringement indemnification clauses in system sale agreements may require us to take other actions or require us to provide certain remedies to customers who are exposed to indemnified liabilities. Any of these situations could have a material adverse effect on our business results.

​

If operations were disrupted at Axcelis’ primary manufacturing facility, it would have a negative impact on our business.

​

We have one primary manufacturing facility located in Massachusetts. Our operations could be subject to disruption for a variety of reasons, including, but not limited to natural disasters, work stoppages, operational facility constraints and terrorism. Such disruption could cause delays in shipments of products to our customers and could result in cancellation of orders or loss of customers, which could seriously harm our business.

​

If we do not have access to capital on favorable terms, on the timeline we anticipate, or at all, our financial condition and results of operations could be materially adversely affected.

​

We require a substantial amount of capital to meet our operating requirements and remain competitive. We routinely incur significant costs to purchase inventory to meet expected system sales, to develop and introduce new products, and to place evaluation systems at new customer sites. Our Board has also authorized management to repurchase shares of our common stock under a stock repurchase program. There can be no assurance that we will realize a return on the capital expended. Although our current cash levels and borrowing capacity are expected to be adequate for our foreseeable cash requirements, if our operating results falter, or our cash flow or capital resources prove inadequate, we may incur additional debt to fund these requirements. Significant volatility or disruption in the global financial markets may result in us not being able to obtain additional financing on favorable terms, on the timeline we anticipate, or at all, and we may not be able to refinance, if necessary, any outstanding debt when due, all of which could have a material adverse effect on our financial condition. Any inability to obtain funding on favorable terms, on the timeline we anticipate, or at all, may cause us to curtail our operations significantly, reduce planned capital expenditures and research and development, or obtain funds through arrangements that management does not currently anticipate, including disposing of our assets and relinquishing rights to certain technologies, the occurrence of any of which may significantly impair our ability to remain competitive, and materially and adversely affect our results of operations and financial condition.

​

16

The market price of our common stock may be volatile, which could result in substantial losses for investors.

​

The stock markets in general, and the markets for semiconductor equipment stocks in particular, have experienced extreme volatility that has often been unrelated to the operating performance of particular companies. These broad market fluctuations may adversely affect the trading price of our common stock. The market price of the common stock may also fluctuate significantly in response to the following factors, among others, some of which are beyond our control:

​

​

The trading price of our common stock in the past has had significant volatility, and we cannot accurately predict every potential risk that may materially and adversely affect our stock price.

​

Item 1B. Unresolved Staff Comments.

​

None.

​

Item 2. Properties.

​

We lease our principal facility in Beverly, Massachusetts, which comprises 417,000 square feet. The facility is principally used for manufacturing, research and development, sales/marketing, customer support, advanced process development, product demonstration, customer-training center and corporate headquarters. We believe that our manufacturing facilities and equipment generally are well maintained, in good operating condition, suitable for our purposes, and adequate for our present operations.

​

We own 23 acres of undeveloped property in Beverly, Massachusetts, adjacent to our headquarters.

​

As of December 31, 2020, we also leased 39 other properties, of which 11 are located in the United States and the remainder are located in Asia and Europe, including offices in Taiwan, Singapore, South Korea, China, Japan, Italy and Germany. These properties are used for sales and service offices and warehousing.

​

Our Beverly, Massachusetts facility is ISO 9001:2015 and ISO 14001:2015 and our European office is ISO 9001:2015 certified.

​

Item 3. Legal Proceedings.

​

We are not presently a party to any litigation that we believe might have a material adverse effect on our business operations. We are, from time to time, a party to litigation that arises in the normal course of our business operations.

​

Item 4. Mine Safety Disclosures.

​

Not applicable.

17

PART II

​

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

​

Our common stock trades on the Nasdaq Global Select Market under the symbol ACLS. As of February 23, 2021, we had approximately 811 stockholders of record.

​

In December 2019, the Board approved stock repurchases of up to $50 million of our common stock through the end of 2020. This program was suspended at the end of the first quarter of 2020, in light of uncertainties arising from the global COVID-19 pandemic. The following table summarizes the stock repurchase activity for the 12 months ended December 31, 2020 and the approximate dollar value of shares that may yet be purchased pursuant to our stock repurchase program:

​

​

On January 12, 2021, we announced that our Board of Directors authorized a one-year share repurchase program of up to $100 million of our common stock. Our stock repurchases may be effected from time to time through open market purchases or pursuant to a Rule 10b5-1 plan. The pace of our repurchase activity will depend on factors such as our working capital needs, our cash requirements for business development, our stock price, and economic and market conditions. We have no obligation to repurchase shares under the authorization and we may suspend or discontinue the repurchase program at any time.

​

18

We maintain three equity compensation plans, the 2000 Stock Plan (which was terminated as to new grants on May 1, 2012), the 2012 Equity Incentive Plan (the “2012 Equity Plan”) and the 2020 Employee Stock Purchase Plan. The number of shares issuable upon exercise of outstanding options and unvested restricted stock units granted to employees and non-employee directors, as well as the number of shares remaining available for future issuance, under our equity compensation plans as of December 31, 2020 are summarized in the following table:

​

​

​

​

Item 6. Selected Financial Data.

​

Not required.

​

​

19

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

​

Certain statements in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” are forward-looking statements that involve risks and uncertainties. Words such as may, will, should, would, anticipates, expects, intends, plans, believes, seeks, estimates and similar expressions identify such forward-looking statements. The forward-looking statements contained herein are based on current expectations and entail various risks and uncertainties that could cause actual results to differ materially from those expressed in such forward-looking statements. Factors that might cause such a difference include, among other things, those set forth under “Liquidity and Capital Resources” and “Risk Factors” and others discussed elsewhere in this Form 10-K. Readers are cautioned not to place undue reliance on these forward-looking statements, which reflect management’s analysis only as of the date hereof. We assume no obligation to update these forward-looking statements to reflect actual results or changes in factors or assumptions affecting forward-looking statements, except as may be required by law.

​

Overview

​

The semiconductor capital equipment industry is subject to cyclical swings in capital spending by semiconductor chip manufacturers. Capital spending is influenced by demand for semiconductors and the products using them, the utilization rate and capacity of existing semiconductor chip manufacturing facilities and changes in semiconductor technology, all of which are outside of our control. As a result, our revenue may fluctuate from year to year and period to period. Our established cost structure does not vary significantly with changes in volume. We may also experience fluctuations in operating results and cash flows depending on our revenue level.

​

2020 was an exceptional year for Axcelis despite the many difficult logistical challenges brought on by the geo-political environment and the pandemic. As a result of the strength of the overall electronics market and the continued growth of the Purion product family in 2020, we delivered our highest annual revenue in the last 15 years. Net income increased 193.4% on a 38.4% increase in revenue from the prior year. Revenue for 2020 was $474.6 million, an increase of 38.4% from 2019 revenue of $343.0 million. Systems revenue for 2020 was $293.6 million, compared to $202.6 million in 2019. Operating profit was $58.0 million in 2020, compared to $24.2 million in 2019. Net income for the year was $50.0 million with diluted earnings per share of $1.46. This compares to 2019 net income of $17.0 million and earnings per diluted share of $0.50.

​

The Company is in a strong competitive position as we participate in a period of extended industry growth. A focused strategy on ion implant, combined with the hard work and dedication of our employees and the encouragement and support of our customers and suppliers, enabled us to achieve numerous critical milestones in our drive to market leadership. In 2020, we continued to expand the Purion installed base, growing our large and diverse group of customers. We continued our focus on the mature process technology segment in 2020, launching both the Purion H200™ high current implanter, targeted for the production of power devices, and the Purion XEmax™ for image sensors. Through the introduction of new Purion product extensions and continuous cost reduction measures, we maintained our gross margin year over year, making this the third consecutive year with gross margin greater than 40 percent.

​

We continue to work diligently to ensure that manufacturing and operating expense levels remain well aligned to business conditions.

​

The market for our systems and aftermarket products and services is represented by a relatively small number of companies. In 2020, the top 20 semiconductor chip manufacturers accounted for approximately 90.4% of total semiconductor capital equipment spending, up from 88.2% in 2019. Our net revenue from our ten largest customers accounted for 74.0% of total revenue for the year ended December 31, 2020 compared to 74.1% and 76.9% of revenue for the years ended December 31, 2019 and 2018, respectively. For the year ended December 31, 2020, we had two customers representing 17.9% and 16.4% of total revenue, respectively.

​

Critical Accounting Estimates

​

Management’s discussion and analysis of our financial condition and results of operations are based upon Axcelis’ consolidated financial statements, which have been prepared in accordance with accounting principles generally

20

accepted in the United States. The preparation of these financial statements requires management to make estimates and judgments that affect the reported amounts of assets, liabilities, revenue and expenses, and related disclosure of contingent assets and liabilities. On an on-going basis, we evaluate our estimates and assumptions. Management’s estimates are based on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

​

We believe the following accounting policies are critical in the portrayal of our financial condition and results of operations and require management’s most significant judgments and estimates in the preparation of our consolidated financial statements. For additional accounting policies, see Note 2 to the consolidated financial statements for the year ended December 31, 2020 included in this Annual Report on Form 10-K.

​

Revenue Recognition

​

Our accounting policies relating to the recognition of revenue require management to make estimates, determinations and judgments based on historical experience and on various other assumptions, which include (i) the existence of a contract with the customer, (ii) the identification of the performance obligations in the contract, (iii) the value of any variable consideration in the contract, (iv) the standalone selling price of multiple obligations in the contract, for the purpose of allocating the consideration in the contract, and (v) determining when a performance obligation has been met. Our revenue recognition policies are set forth in section (i) of Note 2, Summary of Significant Accounting Policies, to the consolidated financial statements for the year ended December 31, 2020 included in this Annual Report on Form 10-K. Recognition of revenue based on incorrect judgments, including an erroneous allocation of the estimated sales price between the units of accounting, could result in inappropriate recognition of revenue, or incorrect timing of revenue recognition, which could have a material effect on our financial condition and results of operations.

​

Inventory—Provision for Excess and Obsolescence and Lower of Cost or Net Realizable Value

​

We record a provision for estimated excess and obsolete inventory and lower of cost or net realizable value. The provision is determined using management’s assumptions of materials usage, based on estimates of forecasted and historical demand and market conditions. Specifically, our assumptions of forecasted system sales and the size and utilization of the installed base of systems may have a significant effect on estimated materials usage. If actual market conditions become less favorable than those projected by management, additional inventory write-downs may be required.

​

Although we make every effort to ensure the accuracy of our forecasts or product demand and pricing assumptions, any significant unanticipated changes in demand, pricing, or technical developments would significantly impact the value of our inventory and our reported operating results. In the future, if we determine that inventory needs to be written down, we will recognize such costs in our cost of revenue at the time of such determination. If we subsequently sell product that has previously been written down, our gross margin in that period will be favorably impacted.

​

Product Warranty

​

We generally offer a one-year warranty for all of our systems, the terms and conditions of which vary depending upon the product sold. For all systems sold, we accrue a liability for the estimated cost of standard warranty at the time of system shipment and defer the portion of systems revenue attributable to the relative fair value of non-standard warranty. Costs for non-standard warranty are expensed as incurred. Factors that affect our warranty liability include the number of installed units, historical and anticipated product failure rates, material usage and service labor costs. We periodically assess the adequacy of our recorded liability and adjust the amount as necessary.

​

21

Income Taxes

​

We record income taxes using the asset and liability method. Deferred income tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective income tax basis, and net operating loss and tax credit carryforwards.

​

Our consolidated financial statements contain certain deferred tax assets which have arisen primarily as a result of operating losses, as well as other temporary differences between financial and income tax accounting.

​

We establish a valuation allowance when it is more likely than not that some portion or all of the deferred tax assets will not be realized. Significant management judgment is required in determining our provision for income taxes, the deferred tax assets and liabilities and any valuation allowance recorded against those net deferred tax assets.

​

We evaluate the weight of all available evidence such as historical losses, the expected timing of the reversals of existing temporary differences and projected future taxable income to determine whether it is more likely than not that some portion or all of the net deferred income tax assets will not be realized.

​

Our income tax expense includes the largest amount of tax benefit for an uncertain tax position that is more likely than not to be sustained upon audit based on the technical merits of the tax position. Settlements with tax authorities, the expiration of statutes of limitations for particular tax positions, or obtaining new information on particular tax positions may cause a change to the effective tax rate. We recognize accrued interest related to unrecognized tax benefits as interest expense and penalties as operating expense.

​

22

Results of Operations

​

The following year-to-year comparative statements include the 2020 and 2019 year periods. For comparative statements for 2019 and 2018 periods, please refer to our 2019 Annual Report on Form 10-K, filed with the Securities and Exchange Commission on March 2, 2020.

​

The following table sets forth our results of operations as a percentage of total revenue:

​

​

23

Revenue

​

The following table sets forth our revenue:

​

​

2020 Compared with 2019

​

Product

​

Product revenue, which includes new system sales, sales of spare parts, product upgrades and used system sales was $449.9 million or 94.8% of revenue in 2020, compared with $319.5 million, or 93.2% of revenue in 2019. The increase in product revenue in 2020 was primarily driven by an increase in the number of Purion systems sold.

​

A portion of our revenue from system sales is deferred until installation and other services related to future deliverables are performed. The total amount of deferred revenue at December 31, 2020 and 2019 was $23.1 million and $29.3 million, respectively. The decrease was primarily due to a decrease in system prepayments in the current year.

​

Services

​

Services revenue, which includes the labor component of maintenance and service contracts and fees for service hours provided by on-site service personnel, was $24.7 million, or 5.2% of revenue for 2020, compared with $23.5 million, or 6.8% of revenue for 2019. Although services revenue should increase with the expansion of the installed base of systems, it can fluctuate from period to period based on capacity utilization at customers’ manufacturing facilities, which affects the need for equipment service.

​

Revenue Categories used by Management

​

In addition to the line item revenue categories discussed above, management also uses revenue categorizations which break down revenue into other groupings. Management regularly disaggregates revenue in the following categories, which it finds relevant and useful:

​

​

​

24

Aftermarket revenue reflect current fab utilization as opposed to System revenue, which reflect capital investment decisions by our customers, which have differing economic drivers;

​

​

The ion implant and CS&I/aftermarket revenue categories for the twelve month periods ended December 31, 2020 and 2019 are discussed below.

​

2020 Compared with 2019

​

Ion Implant

​

Revenue from sales of ion implantation products and related service was $456.8 million, or 96.3% of total revenue in 2020, compared with $326.0 million, or 95.1%, of total revenue in 2019. The increase in Ion Implant revenue in 2020 was primarily driven by an increase in the number of Purion systems sold.

​

CS&I/Aftermarket

​

We refer to the business of selling spare parts, product upgrades, and used systems, combined with the sale of maintenance labor and service contracts and service hours, as our Customer Satisfaction and Innovation (“CS&I”) function, also referred to as the “aftermarket” business. Revenue from our aftermarket business was $180.9 million in 2020, compared to $140.4 million for 2019. Aftermarket revenue generally increases with the expansion of the installed base of systems but can fluctuate from period to period based on capacity utilization at customers’ manufacturing facilities which affects the sale of spare parts and demand for equipment service.

​

Gross Profit / Gross Margin

​

The following table sets forth our gross profit:

​

​

2020 Compared with 2019

​

Product

​

Gross margin from product revenue was 43.9% for the twelve months ended December 31, 2020, compared to 45.0% for the twelve months ended December 31, 2019. The change in gross margin resulted from a decreased mix of higher margin parts and upgrade revenue.

25

​

Services

​

Gross margin from services revenue was 4.3% for the twelve months ended December 31, 2020, compared to 1.6% for the twelve months ended December 31, 2019. The increase in gross margin is attributable to changes in the mix of service contracts.

​

Operating Expenses

​

The following table sets forth our operating expenses:

​

​

Our operating expenses consist primarily of personnel costs, including salaries, commissions, bonuses, stock-based compensation and related benefits and taxes; project material costs related to the design and development of new products and enhancement of existing products; and professional fees, travel and depreciation expenses. Personnel costs are our largest expense, representing $90.1 million, or 64.1% of our total operating expenses, for the year ended December 31, 2020; and $70.2 million, or 58.5%, of our total operating expenses for the year ended December 31, 2019.

​

Research and Development

​

​

Our ability to remain competitive depends largely on continuously developing innovative technology, with new and enhanced features and systems and introducing them at competitive prices on a timely basis. Accordingly, based on our strategic plan, we establish annual R&D budgets to fund programs that we expect will drive competitive advantages.

​

2020 Compared with 2019

​

Research and development expense was $61.8 million in 2020, an increase of $7.9 million, or 14.7%, compared with $53.9 million in 2019. The increase was primarily due to higher incentive based pay and increased depreciation associated with capital additions.

​

26

Sales and Marketing

​

​

Our sales and marketing expenses result primarily from the sale of our equipment and services through our direct sales force.

​

2020 Compared with 2019

​

Sales and marketing expense was $38.7 million in 2020, an increase of $4.5 million, or 13.0%, compared with $34.3 million in 2019. The increase was primarily due to higher incentive based pay.

​

General and Administrative

​

​

Our general and administrative expenses result primarily from the costs associated with our executive, finance, information technology, legal and human resource functions.

​

2020 Compared with 2019

​

General and administrative expense was $40.0 million in 2020, an increase of $8.2 million, or 26.0% compared with $31.7 million in 2019. The increase was primarily due to higher incentive based pay.

​

Other (Expense) Income

​

Other (expense) income consists primarily of interest expense relating to the lease obligation we incurred in connection with the 2015 sale of our headquarters facility (“sale leaseback”) and other financing obligations, foreign exchange gains and losses attributable to fluctuations of the U.S. dollar against the local currencies of certain of the countries in which we operate, as well as interest earned on our invested cash balances.

​

​

2020 Compared with 2019

​

Other expense for the year ended December 31, 2020 was $2.2 million, which includes $5.2 million of interest expense related to our sale leaseback obligation, offset partially by $1.4 million of foreign currency translation gains, other miscellaneous income of $0.9 million and interest income of $0.7 million. Other expense for the year ended December 31, 2019 was $3.3 million, which includes $5.2 million of interest expense related to our sale leaseback obligation, $0.6 million of foreign currency translation losses and other miscellaneous expense of $0.5 million, partially offset by interest income of $3.0 million.

27

​

Income Taxes

​

​

2020 Compared with 2019

​

Income tax expense was $5.9 million for the year ended December 31, 2020 compared to $3.9 million in the previous year. The effective tax rate at December 31, 2020 was 10.6% percent compared to 18.6% at December 31, 2019.  The decrease in the effective tax rate is primarily due to a previously unrecognized tax benefit of $4.3 million. We have significant net operating loss carryforwards in the United States and certain European jurisdictions, and as a result, we do not currently pay significant income taxes in those jurisdictions.

​

At December 31, 2020, we had $57.9 million of net deferred tax assets worldwide relating to net operating loss carryforwards, tax credit carryforwards and other temporary differences, which are available to reduce income taxes in future years. We have continued to maintain a $9.1 million valuation allowance in the U.S. against certain tax credits and state net operating losses due to the uncertainty of their realization based on long-term Company forecasts and the expiration dates on these attributes. If future operating results of the U.S. or these foreign jurisdictions are significantly less than our expectations, it is reasonably possible that we would be required to record an additional valuation allowance on our deferred tax assets in the future.

Liquidity and Capital Resources

​

Our liquidity is affected by many factors. Some of these relate specifically to the operations of our business. For example, our sales and other factors are influenced by the uncertainties of global economies, including the availability of credit and the condition of the overall semiconductor capital equipment industry. Our established cost structure does not vary significantly with changes in volume. We experience fluctuations in operating results and cash flows depending on fluctuations in our revenue level.

​

In 2020, $69.7 million of cash was provided by operating activities. This compares to $13.6 million of cash used by operations in 2019. Cash and cash equivalents at December 31, 2020 was $203.5 million, compared to $139.9 million at December 31, 2019. Approximately $29.9 million of cash was located in foreign jurisdictions as of December 31, 2020. In addition to the cash and cash equivalent balance at December 31, 2020, we had $0.8 million in restricted cash which relates to a $0.7 million letter of credit relating to workers’ compensation insurance and a $0.1 million deposit relating to customs activity. Working capital at December 31, 2020 was $386.4 million. At December 31, 2020, we had no bank debt.

​

Capital expenditures were $7.4 million, slightly offset by a gain on sale of equipment, for a net $7.3 million of cash used in investing activities for the year ended December 31, 2020. Capital expenditures were $12.0 million for the year ended December 31, 2019. Total capital expenditures for 2021 are projected to be approximately $7.0 million. Future capital expenditures beyond 2021 will depend on a number of factors, including the timing and rate of expansion of our business and our ability to generate cash to fund them.

​

Cash used in financing activities was $2.4 million for the year ended December 31, 2020, which consisted of $7.5 million related to our stock repurchase program, $3.9 million related to net settlement of restricted stock issuances, and $0.4 million of principal payment on our finance lease obligation. These uses of cash were partially offset by $8.4 million in proceeds of stock option exercises and $1.0 million in proceeds from our employee stock purchase plan. Cash used in financing activities for the year ended December 31, 2019 was $13.4 million, which consisted of $17.7 million related to our stock repurchase program, $1.6 million related to net settlement of restricted stock issuances, partially

28

offset by $5.1 million in proceeds of stock option exercises and $0.9 million in proceeds from our employee stock purchase plan.

​

We have outstanding letters of credit, surety bonds and deposits in the amount of $13.5 million to cover the security deposit under the lease of our headquarters, our workers’ compensation insurance program, customs and bank deposits and certain value added tax claims in Europe.

​

The following represents our commercial commitments as of December 31, 2020 (in thousands):

​

​

The following represents our contractual obligations as of December 31, 2020 (in thousands):

​

​

We have no off-balance sheet arrangements as of December 31, 2020.

​

We have net operating loss and tax credit carryforwards, the tax effect of which aggregate $51.4 million at December 31, 2020. These carryforwards, which expire principally between 2030 and 2034, are available to reduce future income tax liabilities in the United States and certain foreign jurisdictions.

​

We consider the undistributed earnings of our foreign subsidiaries as of December 31, 2020, to be indefinitely reinvested and, accordingly, no U.S. income taxes have been provided thereon. As of December 31, 2020, the amount of cash associated with indefinitely reinvested foreign earnings was approximately $14.0 million. We have not, nor do we anticipate the need to, repatriate funds to the United States to satisfy domestic liquidity needs arising in the ordinary course of business, including liquidity needs associated with our domestic debt service requirements. Upon repatriation of those earnings, in the form of dividends or otherwise, we could be subject to withholding taxes payable to the various foreign tax jurisdictions.

​

Under the rules of the U.S. Securities and Exchange Commission (the “SEC”), we qualify as a “well-known seasoned issuer,” which allows us to file shelf registration statements to register an unspecified amount of securities that are effective upon filing. On May 29, 2020, we filed such a shelf registration statement with the SEC for the issuance of an unspecified amount of common stock, preferred stock, various series of debt securities and/or warrants to purchase any of such securities, either individually or in units, from time to time at prices and on terms to be determined at the time of any such offering. This registration statement was effective upon filing and will remain in effect for up to three years from filing, prior to which time we may file another shelf registration statement to maintain the availability of this financing option.

​

On July 31, 2020, we entered into a Senior Secured Credit Facilities Credit Agreement (the “Credit Agreement”) with Silicon Valley Bank. The Credit Agreement provides for a revolving credit facility in an aggregate principal amount not to exceed $40.0 million. Our obligations under the Credit Agreement are secured by a security interest, senior to any current and future debts and to any security interest, in all of our rights, title, and interest in, to and under substantially all of our assets, subject to limited exceptions, including permitted liens. The revolving credit facility terminates on July 31, 2023. As of December 31, 2020, we were in compliance with all covenant requirements of the

29

Credit Agreement. As of such date, no borrowings had been made under the Credit Agreement, although a letter of credit for $5.9 million, previously issued by Silicon Valley Bank, had been rolled under the Credit Agreement, reducing the funds available for borrowing under the credit line. We have no immediate plans to borrow under the Credit Agreement, but we may use the facility for letters of credit, for ongoing working capital needs and to fund general corporate purposes, as desired.

​

On January 12, 2021 we announced that our Board of Directors authorized a one-year share repurchase program of up to $100 million of our common stock. These shares may be purchased in the open market or through privately negotiated transactions. We have no obligation to repurchase shares under the authorization, and the timing, actual number and value of shares which are repurchased will depend on a number of factors, including the price of our common stock, general business and market conditions, and alternative investment opportunities. We may suspend or discontinue the repurchase program at any time.

​

We believe that based on our current market, revenue, expense and cash flow forecasts, our existing cash, cash equivalents and borrowing capacity will be sufficient to satisfy our anticipated cash requirements for the short and long-term.

​

Related-Party Transactions

​

There are no significant related-party transactions that require disclosure in the consolidated financial statements for the year ended December 31, 2020, or in this Annual Report on Form 10-K.

​

Recent Accounting Pronouncements

​

A discussion of recent accounting pronouncements, the impact of some of which may be material, is included in Note 2 to the consolidated financial statements for the year ended December 31, 2020 included in this Annual Report on Form 10-K.

​

Item 7A. Quantitative and Qualitative Disclosures about Market Risk.

​

Interest Rate Sensitivity

​

Our exposure to market risk for changes in interest rates relates primarily to our investment portfolio, which consists entirely of cash equivalents at December 31, 2020. The primary objective of our investment activities is to preserve principal. This is accomplished by investing in marketable investment grade securities. We do not use derivative financial instruments in managing our investment portfolio. Due to the nature of our investments, we do not expect our operating results or cash flows to be affected to any significant degree by any change in market interest rates.

​

Foreign Currency Exchange Risk

​

Substantially all of our sales are billed in U.S. dollars, thereby reducing the impact of fluctuations in foreign exchange rates on our results. Operating margins of certain foreign operations can fluctuate with changes in foreign exchange rates to the extent revenue is billed in U.S. dollars and operating expenses are incurred in the local currency. During the years ended December 31, 2020 and 2019, approximately 26.0% and 25.3% of our revenue were derived in local currencies from foreign operations with this inherent risk. In addition, at both December 31, 2020 and 2019, our operations outside of the United States accounted for approximately 13.7% and 13.4% of our total assets, respectively, the majority of which was denominated in currencies other than the U.S. dollar. We currently do not use derivative financial instruments in managing our foreign currency exchange risk.

​

Item 8. Financial Statements and Supplementary Data.

​

Response to this Item is submitted as a separate section of this report immediately following Item 15.

​

30

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.

​

None.

​

Item 9A. Controls and Procedures.

​

Evaluation of Disclosure Controls and Procedures.

​

Our management, with the participation of our principal executive officer and principal financial officer, has evaluated the effectiveness of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) as of the end of the period covered by this annual report (the “Evaluation Date”). Based on this evaluation, our principal executive officer and principal financial officer concluded that, as of the Evaluation Date, these disclosure controls and procedures are effective.

​

Internal Control over Financial Reporting

​

Management’s Annual Report on Internal Control over Financial Reporting

​

Management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rule 13a-15(f) under the Exchange Act. Because of its inherent limitations, internal control over financial reporting may not prevent or detect all misstatements. A control system, no matter how well designed and operated, can provide only reasonable assurance with respect to financial statement preparation and presentation. Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

​

Management assessed the effectiveness of our internal control over financial reporting as of December 31, 2020. In making this assessment, management used the criteria set forth in the Committee of Sponsoring Organizations of the Treadway Commission (COSO) Internal Control—2013 Integrated Framework.

​

Based on this assessment, management has concluded that, as of December 31, 2020, our internal control over financial reporting is effective based on those criteria.

​

The independent registered public accounting firm of Ernst & Young LLP, as auditors of our consolidated financial statements, has issued an attestation report on its assessment of our internal control over financial reporting.

​

​

​

​

​

​

31

Report of Independent Registered Public Accounting Firm

​

To the Stockholders and the Board of Directors of Axcelis Technologies, Inc.

​

Opinion on Internal Control Over Financial Reporting

​

We have audited Axcelis Technologies, Inc.’s internal control over financial reporting as of December 31, 2020, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) (the COSO criteria). In our opinion, Axcelis Technologies, Inc. (the Company) maintained, in all material respects, effective internal control over financial reporting as of December 31, 2020, based on the COSO criteria.

​

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the 2020 consolidated financial statements of the Company and our report dated February 26, 2021 expressed an unqualified opinion thereon.

​

Basis for Opinion

​

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Annual Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

​

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects.  

​

Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

​

Definition and Limitations of Internal Control Over Financial Reporting

​

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

​

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

​

/s/ Ernst & Young LLP

​

Boston, Massachusetts

February 26, 2021

32

Changes in Internal Control over Financial Reporting

​

There was no change in our internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) identified in connection with the evaluation of our internal control that occurred during our fourth quarter that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

​

Item 9B. Other Information

​

In connection with his retirement, John E. Aldeborgh, Executive Vice President, Global Customer Operations, has submitted his resignation as an executive officer of the Company, effective March 1, 2021. Russell J. Low has assumed the title of Executive Vice President, Global Customer and Engineering Operations, and will lead both Axcelis’ engineering functions as well as global customer operations. To facilitate this transition, Mr. Aldeborgh will serve as a senior advisor to Dr. Low for some period following his retirement.

​

​

​

​

33

​

PART III

​

Item 10. Directors, Executive Officers and Corporate Governance.

​

A portion of the information required by Item 10 of Form 10-K is incorporated by reference from the information responsive thereto contained in the sections in Axcelis Proxy Statement for the Annual Meeting of Stockholders to be held May 12, 2021 (the “Proxy Statement”) captioned:

​

​

​

​

​

The remainder of such information is set forth under the heading “Information about our Executive Officers” at the end of Item 1 in Part I of this report and is incorporated herein by reference.

​

Item 11. Executive Compensation.

​

The information required by Item 11 of Form 10-K is incorporated by reference from the information responsive thereto contained in the sections in the Proxy Statement captioned:

​

​

​

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

​

The information required by Item 12 of Form 10-K is incorporated by reference from the information responsive thereto contained in the sections in the Proxy Statement captioned:

​

​

​

Item 13. Certain Relationships and Related Transactions and Director Independence.

​

The information required by Item 13 of Form 10-K is incorporated by reference from the information responsive thereto contained in the sections in the Proxy Statement captioned:

​

​

​

​

Item 14. Principal Accounting Fees and Services

​

The information required by Item 14 of Form 10-K is incorporated by reference from the information responsive thereto contained in the section captioned “Proposal 2: Ratification of the Appointment of our Independent Registered Public Accounting Firm” in the Proxy Statement.

34

​

PART IV

​

Item 15. Exhibits, Financial Statement Schedules.

​

​

​

​

​

Schedule II—Valuation and Qualifying Accounts for the years ended December 31, 2020, 2019 and 2018.

​

​

The exhibits filed as part of this Form 10-K are listed on the Exhibit Index immediately preceding the signature page, which Exhibit Index is incorporated herein by reference.

​

All other schedules for which provision is made in the applicable regulation of the Securities and Exchange Commission are not required under the related instructions or are inapplicable, and therefore have been omitted.

​

​

Item 16. Form 10-K Summary

​

Not applicable.

​

​

35

Report of Independent Registered Public Accounting Firm

​

To the Stockholders and the Board of Directors of Axcelis Technologies, Inc.

​

Opinion on the Financial Statements

​

We have audited the accompanying consolidated balance sheets of Axcelis Technologies, Inc. (the Company) as of December 31, 2020 and 2019, the related consolidated statements of operations, comprehensive income, stockholders’ equity and cash flows for each of the three years in the period ended December 31, 2020, and the related notes and financial statement schedule listed in the Index at Item 15(a) (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company at December 31, 2020 and 2019, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2020, in conformity with U.S. generally accepted accounting principles.  

​

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company’s internal control over financial reporting as of December 31, 2020, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework), and our report dated February 26, 2021 expressed an unqualified opinion thereon.

​

Adoption of New Accounting Standards

​

As discussed in Note 9 to the consolidated financial statements, the Company changed its method for accounting for leases in 2019.

​

Basis for Opinion

​

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

​

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

​

Critical Audit Matters

​

The critical audit matters communicated below are matters arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matters below, providing separate opinions on the critical audit matters or on the accounts or disclosures to which they relate.

​

36

​

/s/ Ernst & Young LLP

​

We have served as the Company’s auditor since 1999.

​

Boston, Massachusetts

February 26, 2021

​

37

Axcelis Technologies, Inc.

Consolidated Statements of Operations

(In thousands, except per share amounts)

​

​

​

See accompanying Notes to these Consolidated Financial Statements

​

38

Axcelis Technologies, Inc.

Consolidated Statements of Comprehensive Income

(In thousands)

​

​

​

See accompanying Notes to these Consolidated Financial Statements

​

39

Axcelis Technologies, Inc.

Consolidated Balance Sheets

(In thousands, except per share amounts)

​