BADGER METER INC - Quarter Report: 2011 June (Form 10-Q)

 

 

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

		Quarterly Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

for the quarterly period ended June 30, 2011

BADGER METER, INC.

4545 W. Brown Deer Road
Milwaukee, Wisconsin 53223
(414) 355-0400
A Wisconsin Corporation
IRS Employer Identification No. 39-0143280
Commission File No. 001-06706

          Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.

Yes þ           No o

          Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).

Yes þ           No o

          Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer o		Accelerated filer þ		Non-accelerated filer o		Smaller reporting company o
				(Do not check if a smaller reporting company)

          Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

Yes o           No þ

          As of July 13, 2011, there were 15,112,493 shares of Common Stock outstanding with a par value of $1 per share.

 

 

BADGER METER, INC.

Quarterly Report on Form 10-Q for the Period Ended June 30, 2011

Index

		Page No.
Part I. Financial Information:
Item 1 Financial Statements:
Consolidated Condensed Balance Sheets — June 30, 2011 and December 31, 2010		4
Consolidated Condensed Statements of Operations — Three and Six Months Ended June 30, 2011 and 2010		5
Consolidated Condensed Statements of Cash Flows — Six Months Ended June 30, 2011 and 2010		6
Notes to Unaudited Consolidated Condensed Financial Statements		7
Item 2 Management’s Discussion and Analysis of Financial Condition and Results of Operations		10
Item 3 Quantitative and Qualitative Disclosures about Market Risk		15
Item 4 Controls and Procedures		15
Part II. Other Information:
Item 6 Exhibits		16
Signatures		17
Exhibit Index		18
EX-31.1
EX-31.2
EX-32
EX-101 INSTANCE DOCUMENT
EX-101 SCHEMA DOCUMENT
EX-101 CALCULATION LINKBASE DOCUMENT
EX-101 LABELS LINKBASE DOCUMENT
EX-101 PRESENTATION LINKBASE DOCUMENT

Special Note Regarding Forward Looking Statements

          Certain statements contained in this Quarterly Report on Form 10-Q, as well as other information provided from time to time by Badger Meter, Inc. (the “Company”) or its employees, may contain forward looking statements that involve risks and uncertainties that could cause actual results to differ materially from those in the forward looking statements. The words “anticipate,” “believe,” “estimate,” “expect,” “think,” “should,” “could” and “objective” or similar expressions are intended to identify forward looking statements. All such forward looking statements are based on the Company’s then current views and assumptions and involve risks and uncertainties that include, among other things:

	•		the continued shift in the Company’s business from lower cost, manually read meters toward more expensive, value-added automatic meter reading (AMR) systems, advanced metering infrastructure (AMI) systems and the new advanced metering analytics (AMA) systems that offer a complete solution to customers’ metering needs;
	•		the success or failure of newer Company products;
	•		changes in competitive pricing and bids in both the domestic and foreign marketplaces, and particularly in continued intense price competition on government bid contracts for lower cost, manually read meters;
	•		the actions (or lack thereof) of the Company’s competitors;
	•		changes in the Company’s relationships with its alliance partners, primarily its alliance partners that provide AMR/AMI connectivity solutions, and particularly those that sell products that do or may compete with the Company’s products;
	•		changes in the general health of the United States and foreign economies, including to some extent such things as the length and severity of global economic downturns, the ability of municipal water utility customers to authorize and finance purchases of the Company’s products, the Company’s ability to obtain financing, housing starts in the United States, and overall industrial activity;
	•		the timing and impact of government programs to stimulate national and global economies;
	•		changes in the cost and/or availability of needed raw materials and parts, such as volatility in the cost of brass castings as a result of fluctuations in commodity prices, particularly for copper and scrap metal at the supplier level, foreign-sourced electronic components as a result of currency exchange fluctuations and/or lead times, and plastic resin as a result of changes in petroleum and natural gas prices;
	•		the Company’s expanded role as a prime contractor for providing complete AMR/AMI/AMA systems to governmental entities, which brings with it added risks, including but not limited to, the Company’s responsibility for subcontractor performance, additional costs and expenses if the Company and its subcontractors fail to meet the timetable agreed to with the governmental entity, and the Company’s expanded warranty and performance obligations;
	•		the Company’s ability to successfully integrate acquired businesses or products;
	•		changes in foreign economic conditions, particularly currency fluctuations in the United States dollar, the Euro and the Mexican peso;
	•		the loss or disruption of certain single-source suppliers; and
	•		changes in laws and regulations, particularly laws dealing with the use of lead (which can be used in the manufacture of certain meters incorporating brass housings) and the United States Federal Communications Commission rules affecting the use and/or licensing of radio frequencies necessary for AMR/AMI/AMA products.

          All of these factors are beyond the Company’s control to varying degrees. Shareholders, potential investors and other readers are urged to consider these factors carefully in evaluating the forward looking statements and are cautioned not to place undue reliance on such forward looking statements. The forward looking statements made in this document are made only as of the date of this document and the Company assumes no obligation, and disclaims any obligation, to update any such forward looking statements to reflect subsequent events or circumstances.

Part I — Financial Information

Item 1 Financial Statements

BADGER METER, INC.

Consolidated Condensed Balance Sheets

		June 30,				December 31,
		2011				2010
		(Unaudited)
		(In thousands)
Assets
Current assets:
Cash		$	4,273			$	3,089
Receivables			45,611				40,429
Inventories:
Finished goods			11,984				9,800
Work in process			11,527				15,284
Raw materials			23,723				23,232
Total inventories			47,234				48,316
Prepaid expenses and other current assets			3,744				2,381
Deferred income taxes			3,410				3,122
Total current assets			104,272				97,337
Property, plant and equipment, at cost			142,837				143,954
Less accumulated depreciation			(75,827	)			(77,866	)
Net property, plant and equipment			67,010				66,088
Intangible assets, at cost less accumulated amortization			34,912				34,170
Other assets			6,814				7,449
Deferred income taxes			935				1,658
Goodwill			9,162				9,162
Total assets		$	223,105			$	215,864
Liabilities and shareholders’ equity
Current liabilities:
Short-term debt		$	6,115			$	12,878
Payables			13,616				11,159
Accrued compensation and employee benefits			6,468				7,143
Warranty and after-sale costs			932				889
Income and other taxes			3,632				610
Total current liabilities			30,763				32,679
Other long-term liabilities			2,442				2,472
Accrued non-pension postretirement benefits			6,138				5,972
Other accrued employee benefits			5,512				6,358
Commitments and contingencies (Note 6)
Shareholders’ equity:
Common stock			21,286				21,259
Capital in excess of par value			38,514				37,582
Reinvested earnings			163,005				156,101
Accumulated other comprehensive loss			(11,380	)			(13,137	)
Less:Employee benefit stock			(1,485	)			(1,536	)
Treasury stock, at cost			(31,690	)			(31,886	)
Total shareholders’ equity			178,250				168,383
Total liabilities and shareholders’ equity		$	223,105			$	215,864

See accompanying notes to consolidated condensed financial statements.

BADGER METER, INC.

Consolidated Condensed Statements of Operations

		Three Months Ended								Six Months Ended
		June 30,								June 30,
		(Unaudited)								(Unaudited)
		(In thousands except share and per
		share amounts)
		2011				2010				2011				2010
Net sales		$	75,148			$	74,290			$	132,507			$	136,089
Cost of sales			47,928				47,267				84,850				85,857
Gross margin			27,220				27,023				47,657				50,232
Selling, engineering and administration			14,943				14,041				30,142				28,504
Operating earnings			12,277				12,982				17,515				21,728
Interest expense			96				80				208				180
Earnings before income taxes			12,181				12,902				17,307				21,548
Provision for income taxes			4,347				4,873				6,213				8,167
Net earnings		$	7,834			$	8,029			$	11,094			$	13,381
Per share amounts:
Earnings per share:
Basic		$	0.52			$	0.54			$	0.74			$	0.90
Diluted		$	0.52			$	0.53			$	0.74			$	0.89
Dividends declared — Common stock		$	0.14			$	0.12			$	0.28			$	0.24
Shares used in computation of earnings per share:
Basic			14,962,314				14,924,203				14,943,502				14,916,269
Impact of dilutive securities			90,478				97,232				91,955				103,894
Diluted			15,052,792				15,021,435				15,035,457				15,020,163

See accompanying notes to consolidated condensed financial statements.

BADGER METER, INC.

Consolidated Condensed Statements of Cash Flows

		Six Months Ended
		June 30,
		(Unaudited)
		(In thousands)
		2011				2010
Operating activities:
Net earnings		$	11,094			$	13,381
Adjustments to reconcile net earnings to net cash provided by (used for) operations:
Depreciation			3,793				3,357
Amortization			1,172				763
Gain on legal settlement			0				(740	)
Deferred income taxes			(15	)			(2	)
Noncurrent employee benefits			1,812				1,574
Stock-based compensation expense			542				569
Changes in:
Receivables			(4,739	)			(14,416	)
Inventories			1,693				(5,008	)
Prepaid expenses and other current assets			(1,289	)			(907	)
Liabilities other than debt			3,895				11,933
Total adjustments			6,864				(2,877	)
Net cash provided by operations			17,958				10,504
Investing activities:
Property, plant and equipment expenditures			(2,366	)			(4,155	)
Acquisitions, net of cash acquired			(3,954	)			(7,280	)
Investment in start-up technology company			0				(1,500	)
Other — net			(143	)			31
Net cash used for investing activities			(6,463	)			(12,904	)
Financing activities:
Net increase (decrease) in short-term debt			(7,181	)			(143	)
Repayments of long-term debt			0				(4,893	)
Dividends paid			(4,207	)			(3,587	)
Proceeds from exercise of stock options			234				156
Tax benefit on stock options			141				135
Issuance of treasury stock			417				72
Net cash used for financing activities			(10,596	)			(8,260	)
Effect of foreign exchange rates on cash			285				(82	)
Increase (decrease) in cash			1,184				(10,742	)
Cash — beginning of period			3,089				13,329
Cash — end of period		$	4,273			$	2,587

See accompanying notes to consolidated condensed financial statements.

BADGER METER, INC.

Notes to Unaudited Consolidated Condensed Financial Statements

Note 1 Basis of Presentation

     In the opinion of management, the accompanying unaudited consolidated condensed financial statements of Badger Meter, Inc. (the “Company”) contain all adjustments (consisting only of normal recurring accruals except as otherwise discussed) necessary to present fairly the Company’s consolidated condensed financial position at June 30, 2011, results of operations for the three- and six-month periods ended June 30, 2011 and 2010, and cash flows for the six-month periods ended June 30, 2011 and 2010. The results of operations for any interim period are not necessarily indicative of the results to be expected for the full year.

     The preparation of financial statements in conformity with U.S. generally accepted accounting principles requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. Actual results could differ from those estimates.

     Certain reclassifications have been made to the 2010 consolidated condensed statements of cash flows to conform to the 2011 presentation.

Note 2 Additional Financial Information Disclosure

     The consolidated condensed balance sheet at December 31, 2010 was derived from amounts included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2010. Refer to the footnotes to the financial statements included in that report for a description of the Company’s accounting policies and for additional details of the Company’s financial condition. The details in those notes have not changed except as discussed below and as a result of normal adjustments in the interim.

     Warranty and After-Sale Costs

     The Company estimates and records provisions for warranties and other after-sale costs in the period in which the sale is recorded, based on a lag factor and historical warranty claim experience. After-sale costs represent a variety of activities outside of the written warranty policy, such as investigation of unanticipated problems after the customer has installed the product, or problems caused by water quality issues. The following table presents changes in the Company’s warranty and after-sale costs reserve for the three- and six-month periods ended June 30, 2011 and 2010.

		Three months								Six months
		ended								ended
		June 30,								June 30,
(In thousands)		2011				2010				2011				2010
Balance at beginning of period		$	911			$	969			$	889			$	907
Net additions charged to earnings			272				231				476				429
Costs incurred and adjustments			(251	)			(56	)			(433	)			(192	)
Balance at end of period		$	932			$	1,144			$	932			$	1,144

Note 3 Employee Benefit Plans

     Prior to 2011, the Company maintained a non-contributory defined benefit pension plan that covered substantially all U.S. employees. As of January 1, 2011, the Company froze its pension plan for its non-union participants and formed a new feature within the Badger Meter Employee Savings and Stock Ownership Plan (“ESSOP”) in which each employee receives a similar benefit. No new benefits will accrue in the pension plan for the non-union participants, although they will continue to accrue interest on prior balances. The Company also maintains a non-contributory postretirement plan that provides medical benefits for certain U.S. retirees and eligible dependents.

     The following table sets forth the components of net periodic benefit cost for the three months ended June 30, 2011 and 2010 based on December 31, 2010 and 2009 actuarial measurement dates, respectively:

						Defined								Other
						pension								postretirement
						plan benefits								benefits
(In thousands)			2011				2010				2011				2010
Service cost — benefits earned during the year		$	143			$	447			$	37			$	34
Interest cost on projected benefit obligations			627				713				81				86
Expected return on plan assets			(945	)			(1,003	)			0				0
Amortization of prior service cost			49				0				40				42
Amortization of net loss			449				423				0				0
Net periodic benefit cost		$	323			$	580			$	158			$	162

     The following table sets forth the components of net periodic benefit cost for the six months ended June 30, 2011 and 2010 based on December 31, 2010 and 2009 actuarial measurement dates, respectively:

						Defined								Other
						pension								postretirement
						plan benefits								benefits
(In thousands)			2011				2010				2011				2010
Service cost — benefits earned during the year		$	286			$	946			$	74			$	72
Interest cost on projected benefit obligations			1,254				1,359				162				173
Expected return on plan assets			(1,889	)			(1,903	)			0				0
Amortization of prior service cost			98				0				80				82
Amortization of net loss			898				780				0				0
Net periodic benefit cost		$	647			$	1,182			$	316			$	327

     The Company previously disclosed in its financial statements for the year ended December 31, 2010 that it did not expect to make a contribution to its pension plan for the 2011 calendar year. The Company has determined that no additional contribution will be required for 2011, although it may consider voluntary payments to the plan.

     The Company disclosed in its financial statements for the year ended December 31, 2010 that it estimated it would pay $0.5 million in other postretirement benefits in 2011 based on actuarial estimates. As of June 30, 2011, $69,000 of such benefits were paid. The Company believes that its estimated payments for the full year may be somewhat less than the prior full-year estimate. However, such estimates contain inherent uncertainties because cash payments can vary significantly depending on the timing of postretirement medical claims and the collection of the retirees’ portion of certain costs. Note that the amount of benefits paid in calendar year 2011 will not impact the expense for postretirement benefits for 2011.

Note 4 Comprehensive Income (Loss)

     Comprehensive income for the three-month periods ended June 30, 2011 and 2010 was $8.7 million and $7.7 million, respectively. Comprehensive income for the six-month periods ended June 30, 2011 and 2010 was $12.9 million each.

     Components of accumulated other comprehensive loss are as follows:

		June 30,				December 31,
(In thousands)		2011				2010
| |
Cumulative foreign currency translation adjustment		$	2,503			$	1,457
Unrecognized pension and postretirement benefit plan liabilities net of tax			(13,883	)			(14,594	)
Accumulated other comprehensive loss		$	(11,380	)		$	(13,137	)

Note 5 Acquisition

     On January 26, 2011, the Company purchased Remag of Berne, Switzerland for $4.9 million. Remag distributes a line of precision flow measurement products, some of which they manufacture, for the global

industrial market. Their small turbine meters complement and expand the Company’s existing line of specialty application products. The Company’s preliminary allocation of the purchase price as of June 30, 2011 includes $0.9 million of cash, plus approximately $0.4 million of receivables, $0.4 million of inventory, $0.3 million of other assets, $2.0 million of property, plant and equipment, $1.6 million of intangibles, and other assets and liabilities.

     The acquisition was accounted for under the purchase method, and accordingly, the results of operations are included in the Company’s financial statements from the date of acquisition. The acquisition did not have a material impact on the Company’s consolidated financial statements or the notes thereto.

Note 6 Contingencies, Litigation and Commitments

     In the normal course of business, the Company is named in legal proceedings. There are currently no material legal proceedings pending with respect to the Company. The more significant legal proceedings are discussed below.

     The Company is subject to contingencies related to environmental laws and regulations. The Company is named as one of many potentially responsible parties in two landfill lawsuits and is in the process of resolving a claim related to a parcel of land adjoining the Company’s property. The landfill sites are impacted by the Federal Comprehensive Environmental Response, Compensation and Liability Act and other environmental laws and regulations. At this time, the Company does not believe the ultimate resolution of these matters will have a material adverse effect on the Company’s financial position or results of operations, either from a cash flow perspective or on the financial statements as a whole. Regarding the landfill sites, this belief is based on the Company’s assessment of its limited past involvement with these landfill sites as well as the substantial involvement of and government focus on other named third parties with these landfill sites. However, due to the inherent uncertainties of such proceedings, the Company cannot predict the ultimate outcome of any of these matters. A future change in circumstances with respect to these specific matters or with respect to sites formerly or currently owned or operated by the Company, off-site disposal locations used by the Company, and property owned by third parties that is near such sites, could result in future costs to the Company and such amounts could be material. Expenditures for compliance with environmental control provisions and regulations during 2010 and the first half of 2011 were not material.

     Like other companies in recent years, the Company has been named as a defendant in numerous multi-claimant/multi-defendant lawsuits alleging personal injury as a result of exposure to asbestos, manufactured by third parties, and integrated into or sold with a very limited number of the Company’s products. The Company is vigorously defending itself against these claims. Although it is not possible to predict the ultimate outcome of these matters, the Company does not believe the ultimate resolution of these issues will have a material adverse effect on the Company’s financial position or results of operations, either from a cash flow perspective or on the financial statements as a whole. This belief is based in part on the fact that no claimant has proven or substantially demonstrated asbestos exposure caused by products manufactured or sold by the Company and that a number of cases have been voluntarily dismissed.

     The Company relies on single suppliers for certain castings and components in several of its product lines. Although alternate sources of supply exist for these items, a loss or disruption of certain suppliers could temporarily disrupt the Company’s operations in the short term. The Company attempts to mitigate this risk by working closely with key suppliers, purchasing minimal amounts from alternative suppliers and by purchasing business interruption insurance where appropriate.

     The Company reevaluates its exposures on a periodic basis and makes adjustments to reserves as appropriate.

Note 7 Subsequent Events

     The Company evaluated subsequent events in order to identify conditions that existed at the date of the balance sheet as well as conditions that arose after the balance sheet date but before the financial statements were issued. The effects of conditions that existed at the date of the balance sheet date are recognized in the financial statements. Events and conditions arising after the balance sheet date but before the financial statements are issued are evaluated to determine if disclosure is required to keep the financial statements from being misleading. To the extent such events and conditions exist, disclosures are made regarding the nature and estimated financial effects of such events and conditions. For purposes of preparing the accompanying consolidated financial statements and the notes to these financial statements, the Company evaluated subsequent events through the date the accompanying financial statements were issued.

Note 8 Fair Value Measurements of Financial Instruments

     The carrying amounts of cash, receivables and payables in the financial statements approximate fair value. Short-term debt is comprised of notes payable drawn against the Company’s lines of credit and commercial paper. Because of the short-term nature of these instruments, the carrying value approximates the fair value. Included in other assets are insurance policies on various individuals that were associated with the Company. The carrying amounts of these insurance policies approximate their fair value.

Item 2		Management’s Discussion and Analysis of Financial Condition and Results of Operations

Business Description and Overview

     Badger Meter’s core competency is flow measurement solutions. The Company is a leading manufacturer and marketer of products incorporating liquid flow measurement and control technologies developed both internally and with other technology companies. Its products are used in a variety of applications, including water, oil and chemicals. The Company’s product lines fall into two categories: water applications and specialty applications.

     Water applications, the largest category by sales volume, include water meters and related technologies and services used by water utilities as the basis for generating water and wastewater revenues. The key market for the Company’s water meter products is North America, primarily the United States, because the meters are designed and manufactured to conform to standards promulgated by the American Water Works Association. The Company’s products are also sold for other water-based purposes including irrigation, water reclamation and industrial process applications.

     Specialty applications include the sale of meters and related technologies and services for measuring a wide variety of fluids in industries such as food and beverage, pharmaceutical production, petroleum, heating, ventilating and air conditioning (HVAC), and measuring and dispensing automotive fluids. It also includes the sale of radio technology to natural gas utilities for installation on their gas meters.

     Sales of water meters and related technologies and services for water applications constitute a majority of the Company’s sales and are commonly referred to as residential or commercial meter sales, the latter referring to larger sizes of meters.

     Residential and commercial water meters are generally classified as either manually read meters or remotely read meters via radio technology. A manually read meter consists of the water meter and a register that gives a visual display of the meter reading. Meters equipped with radio transmitters use encoder registers to convert the measurement data from the meter into a digital format which is then transmitted via radio frequency to a receiver that collects and formats the data appropriately for a water utility’s billing system. Drive-by systems, referred to as automatic meter reading (AMR) systems, have been the primary technology deployed by water utilities over the past two decades, providing accurate and cost-effective billing data. In an AMR system, a vehicle equipped for meter reading purposes, including a radio receiver, computer and reading software, collects the data from the utility’s meters.

     Fixed network advanced metering infrastructure (AMI) systems continue to build interest among water utilities. These systems incorporate a network of permanent data collectors or gateway receivers that are always active or listening for the radio transmission from the utility’s meters. AMI systems eliminate the need for utility personnel to drive through service territories to collect meter reading data and they have the ability to provide the utility with more frequent and diverse data from the utility’s meters at specified intervals.

     In early 2011, the Company introduced what it believes will be the next generation of metering technology, advanced metering analytics (AMA), that incorporates both drive-by and fixed network reading capabilities, along with a host of automated utility management tools to facilitate the ability of water utilities to increase their productivity and revenue. AMA is comprised of Readcenter^® Analytics software coupled with the new ORION SE^® two-way fixed network technology, which is complemented by a family of highly accurate and reliable meters.

     The Company’s net sales and corresponding net earnings depend on unit volume and product mix, with the Company generally earning higher margins on meters equipped with AMR, AMI or AMA technology. In

addition to selling its proprietary AMR/AMI/AMA products, including the ORION^® AMR technology and the GALAXY^® AMI system, the Company also remarkets the Itron^® AMR product under a license and distribution agreement with Itron. The Company’s proprietary AMR/AMI/AMA products generally result in higher margins than the remarketed, non-proprietary technology products. The Company also sells registers and radios separately to customers who wish to upgrade their existing meters in the field.

     The proprietary ORION receiver technology has been licensed to other technology providers, including those providing AMR/AMI products that communicate over power lines, broadband networks, and proprietary radio frequency networks, allowing ORION a distinct connectivity advantage in the AMR/AMI market. In addition, the ORION universal gateway receiver transmits data over a variety of public wireless networks, which allows for strategic deployments, such as monitoring large commercial users.

     Water meter replacement, along with the adoption and deployment of new technology, comprise the majority of water meter product sales, including AMR/AMI products. To a much lesser extent, housing starts also contribute to the new product sales base. Over the last decade, there has been a growing trend in the conversion from manually read water meters to AMR/AMI technology. This conversion rate is accelerating and contributes to an increased water meter and AMR/AMI base of business. The Company estimates that less than 30 percent of water meters installed in the United States have been converted to AMR or AMI technology. The Company’s strategy is to fulfill customers’ metering expectations and requirements with its proprietary meter reading systems or other systems available through its alliance partners in the marketplace.

     The specialty application products serve niche flow measurement and control applications across a broad industrial spectrum. Specialized communication protocols that control the entire flow measurement process drive these markets. The Company’s specific flow measurement and control applications and technologies serve the flow measurement market through both customized and standard precision flow measurement technologies. This product group also includes sales of the ORION radio technology to natural gas utilities for installation on their meters.

Business Trends

     Increasingly, the electric utility industry relies on AMI technology for two-way communication to monitor and control electrical devices at the customer’s site. Although the Company does not sell products for electric market applications, the trend toward AMI affects the markets in which the Company does participate, particularly for those customers in the water utility market that are interested in more frequent and diverse data. Specifically, AMI enables water utilities to capture readings from each meter at specific intervals.

     In early 2011, the Company introduced what it believes will be the next generation of metering technology, AMA, that incorporates both drive-by and fixed network reading capabilities, along with a host of automated utility management tools to facilitate the ability of water utilities to increase their productivity and revenue. AMA is comprised of Readcenter^® Analytics software coupled with the new ORION SE^® two-way fixed network technology, which is complemented by a family of highly accurate and reliable meters. By using AMA, utilities will be able to proactively manage their day-to-day operations through powerful analytics-based software and two-way fixed network meter reading. A limited rollout of the Company’s AMA products was done in the first half of 2011 and the Company expects to have these products fully available in the third quarter of 2011.

     The Company sells its technology solutions to meet customer requirements. Since the technology products have comparable margins, any change in the mix between AMR, AMI or AMA is not expected to have a significant impact on the Company’s net sales related to meter reading technology.

     There are approximately 53,000 water utilities in the United States and the Company estimates that less than 30 percent of them have converted to an AMR or AMI technology. Although there is growing interest in AMI communication by water utilities, the vast majority of utilities installing AMR or AMI technology continue to select AMR technologies for their applications. The Company’s ORION technology has experienced rapid acceptance in the United States as an increasing number of water utilities have selected ORION as their AMR solution. The Company anticipates that even with growing interest in AMI, AMR will continue to be the primary product of choice for a number of years. For many water utilities, AMR technology is simply the most cost-effective solution available today. However, with the introduction of AMA, the Company believes it is well-positioned to meet customers’ future needs.

Acquisition

     On January 26, 2011, the Company purchased Remag of Berne, Switzerland for $4.9 million. Remag distributes a line of precision flow measurement products, some of which they manufacture, for the global industrial market. Their small turbine meters complement and expand the Company’s existing line of specialty application products. The Company’s preliminary allocation of the purchase price as of June 30, 2011 includes $0.9 million of cash, plus approximately $0.4 million of receivables, $0.4 million of inventory, $0.3 million of other assets, $2.0 million of property, plant and equipment, $1.6 million of intangibles, and other assets and liabilities.

     The acquisition was accounted for under the purchase method, and accordingly, the results of operations are included in the Company’s financial statements from the date of acquisition. The acquisition did not have a material impact on the Company’s consolidated financial statements or the notes thereto.

Revenue and Product Mix

     Prior to the Company’s introduction of its own proprietary AMR products (ORION), Itron water utility-related products were a dominant AMR contributor to the Company’s results. Itron products are sold under an agreement between the Company and Itron, Inc. that has been renewed multiple times and is in effect until early 2016. The Company’s ORION products directly compete with Itron water AMR products. In recent years, many of the Company’s customers have selected ORION products over Itron products. While ORION sales were 2.5 times greater than those of the Itron licensed products for the first half of 2011 and 2.2 times greater for all of 2010, the Company expects that the Itron products will remain a significant component of sales to utilities. Continuing sales in both product lines underscores the continued acceptance of AMR technology by water utilities and affirms the Company’s strategy of selling Itron products in addition to its own proprietary products.

     As the industry continues to evolve, the Company has been vigilant in anticipating and exceeding customer expectations. In early 2011, the Company introduced AMA as a hardware and software solution for water and gas utilities, which it believes will help maintain the Company’s position as a market leader. The Company continues to seek opportunities for additional revenue enhancement. For instance, the Company is periodically asked to oversee and perform field installation of its products for certain customers. The Company assumes the role of general contractor, hiring installation subcontractors and supervising their work. The Company also supports its product and technology sales with the sale of extended service programs that provide additional services beyond the standard warranty. In recent years, the Company has sold ORION radio technology to natural gas utilities for installation on their gas meters. The revenues from such products and services are not yet significant and the Company is uncertain of the potential growth achievable for such products and services in future periods.

Results of Operations — Three Months Ended June 30, 2011

     The Company’s net sales for the three months ended June 30, 2011 increased $0.8 million, or 1.2%, to $75.1 million compared to $74.3 million during the same period in 2010. The increase was due to higher sales of specialty application products, offset in part by lower sales of water application products. Also included in the second quarter of 2011 results were approximately $1.0 million of sales related to Remag that were not included in the prior year amounts.

     Water application products represented 78.0% of sales for the three months ended June 30, 2011 compared to 87.2% in the same period in 2010. These sales declined nearly $6.1 million for the three months ended June 30, 2011, or 9.4%, to $58.7 million from $64.8 million during the same period in 2010. The decline was due primarily to lower volumes of the Company’s AMR/AMI related products, as well as lower sales of commercial meters. Sales of the Company’s ORION AMR technology products decreased 21.3%, while sales of the Itron related products declined 15.3%. In the most recent period, ORION related products outsold Itron related products by a ratio of 2.4 to 1. Commercial meter sales declined 26.3% in this period over the same period in 2010. The Company believes the volume declines were due to a continuation of certain factors, including concerns over municipal spending that delayed ordering decisions, slower housing starts and the Company’s introduction in early 2011 of the next generation of the ORION product that caused water utilities to take time to evaluate this new technology.

     Specialty application products represented 22.0% of sales for the three months ended June 30, 2011 compared to 12.8% for the same period in 2010. These sales increased $6.9 million in the second quarter of 2011, or 72.6%, to $16.4 million from $9.5 million during the same period in 2010. The increase in sales included $1.0 million for Remag. The remainder of the increase was due primarily to increased sales of radio technology to natural gas customers for connection to their gas meters and higher sales of valves, both domestically and internationally.

     Gross margins were impacted by the net overall sales increase during the second quarter of 2011. The gross margin as a percentage of sales was 36.2% in the second quarter of 2011 compared to 36.4% in the second quarter of 2010. While the percentages were similar, different factors impacted the respective periods. Increased costs of materials, particularly for castings whose costs fluctuate with the metals market, negatively affected margins, although higher selling prices and continuing efforts to reduce manufacturing costs offset some of the higher material costs. In addition, the increase in specialty products sales had a positive impact on margins in the second quarter of 2011.

     Selling, engineering and administration expenses increased $0.9 million, or 6.4%, over the same period in 2010. The increase was attributable to Remag, which was not included in the results for the second quarter of 2010, higher amortization of various intangibles and software and higher costs associated with technical support for the Company’s products. These increases were somewhat offset by lower employee incentives. In addition, the second quarter of 2010 included a one-time credit of $0.7 million for the fair value of land received in settlement of claims against a building contractor.

     Operating earnings declined $0.7 million, or 5.4%, to $12.3 million compared to $13.0 million in 2010, because the increase in selling, engineering and administration expenses was larger than the increase in gross margins.

     The provision for income taxes as a percentage of earnings before income taxes for the second quarter of 2011 was 35.7% compared to 37.8% in the second quarter of 2010. The decline was due primarily to lower estimates for state income taxes.

     As a result of the above mentioned items, net earnings for the three months ended June 30, 2011 were $7.8 million, or $0.52 per diluted share, compared to $8.0 million, or $0.53 per diluted share, for the same period in 2010.

Results of Operations — Six Months Ended June 30, 2011

     The Company’s net sales for the six months ended June 30, 2011 decreased $3.6 million, or 2.6%, to $132.5 million from $136.1 million in the same period in 2010. The net decrease was due to higher sales of specialty application products and higher product prices, offset by lower sales of water application products.

     Water application products represented 76.0% of sales for the six months ended June 30, 2011 compared to 86.5% for the same period in 2011. These sales decreased $17.0 million, or 14.4%, to $100.7 million compared to $117.7 million in the same period in 2010. The decrease was due to lower volumes of meters sold with AMR/AMI technology and lower volumes of commercial meters, offset somewhat by higher product prices. Sales of the Company’s ORION AMR technology products decreased 25.9% in the first half of 2011 from the same period in 2010, while sales of the Itron related products decreased 15.2%. In the first six months of 2011, Orion related products outsold Itron related products by a ratio of 2.5 to 1. Commercial sales decreased 26.3% in the first half of 2011 over the first half of 2010. The Company believes the volume declines were due to certain factors, including concerns over municipal spending delaying ordering decisions, slower housing starts and the Company’s introduction in early 2011 of the next generation of the ORION product that caused water utilities to take time to evaluate this new technology. In addition, poor weather in the Midwest and Northeast had a negative impact on sales due to its effects on budgets and installation rates.

     Specialty products represented 24.0% of sales for the six-month period ended June 30, 2011 compared to 13.5% for the same period in 2010. These sales increased nearly $13.4 million, or 72.8%, to $31.8 million for the first six months of 2011 from $18.4 million for the first six months of 2010. This increase in sales included $1.6 million for Remag, which was acquired in early 2011. Sales also include $4.3 million for Cox Flow Measurement (Cox) sales for the first six months of 2011 versus $1.4 million in 2010, representing sales from its acquisition date of April 1, 2010. The remainder of the increase was due primarily to increased sales of radio technology to natural gas customers for connection to their gas meters and higher sales of valves, both domestically and internationally.

     Gross margin as a percentage of net sales was 36.0% for the first six months of 2011 compared to 36.9% in the same period in 2010. The decline was due to increased costs of materials, particularly for castings whose costs fluctuate with the metals market, offset by higher selling prices and continuing efforts to reduce manufacturing costs. In addition, the increase in specialty products sales had a positive impact on margins.

     Selling, engineering and administration expenses increased $1.6 million, or 5.8%, in the six-month period ended June 30, 2011 compared to the same period in 2010. The increase was due in part to higher expenses associated with the Cox acquisition of which only three months were in the first half of 2010, as well as the addition of Remag in 2011. The increase was also due to higher amortization of various intangibles and software and higher costs associated with technical support for the Company’s products. These increases were somewhat offset by lower employee incentives. The 2010 amounts also included a one-time credit of $0.7 million for the fair value of land received in settlement of claims against a building contractor.

     Operating earnings declined $4.2 million, or 19.4%, to $17.5 million compared to $21.7 million in 2010 as a result of the lower sales and higher costs.

     The provision for income taxes as a percentage of earnings before income taxes for the six-month period ended June 30, 2011 was 35.9% compared to 37.9% in the same period in 2010. The primary reason for the decrease was lower state income tax estimates.

     As a result of the above mentioned items, net earnings for the six months ended June 30, 2011 were $11.1 million compared to $13.4 million in the six-month period ended June 30, 2010. On a diluted basis, earnings per share were $0.74 for the first six months of 2011 compared to $0.89 for the same period in 2010.

Liquidity and Capital Resources

     The main sources of liquidity for the Company are cash from operations and borrowing capacity. Cash provided by operations was $18.0 million for the first six months of 2011 compared to $10.5 million in the same period in 2010. The cash impact of lower earnings for the first six months of 2011 was more than offset by lower working capital than in 2010.

     The receivable balance increased from $40.4 million at December 31, 2010 to $45.6 million at June 30, 2011 due principally to increased sales. The Company believes its net receivables balance is fully collectible.

     Inventories at June 30, 2011 decreased $1.1 million to $47.2 million from $48.3 million at December 31, 2010. The decrease was the net effect of higher sales in the most recent quarter along with efforts to manage inventory levels, offset somewhat by higher material costs, particularly for castings of which copper is a main component, and increased lead times for electronics resulting in higher safety stock levels.

     Prepaid expenses and other current assets at June 30, 2011 increased to $3.7 million from $2.4 million at December 31, 2010 due primarily to the payment of certain calendar year insurance premiums that are expensed ratably over the policy terms.

     Net property, plant and equipment at June 30, 2011 increased to $67.0 million from $66.1 million at December 31, 2010 due to the purchase of Remag and normal capital expenditures, partially offset by depreciation expense.

     The increase in intangibles to $34.9 million at June 30, 2011 from $34.2 million at December 31, 2010 was due to the acquisition of Remag, offset slightly by normal amortization.

     Short-term debt decreased from $12.9 million at December 31, 2010 to $6.1 million at June 30, 2011. The decrease was due to the increased cash provided from operations, offset somewhat by funds used for the acquisition of Remag.

     Accounts payable increased to $13.6 million at June 30, 2011 from $11.2 million at December 31, 2010 due primarily to the timing of payments.

     Accrued income and other taxes increased to $3.6 million at June 30, 2011 from $0.6 million at December 31, 2010 due to current year accruals for taxes and the timing of income tax payments.

     Other accrued employee benefits decreased to $5.5 million at June 30, 2011 from $6.4 million at December 31, 2010 due to the net effect of current year accruals and payments.

     The Company believes its financial condition remains strong and its operating cash flows, available borrowing capacity, and its ability to raise capital provide adequate resources to fund ongoing operating requirements, future capital expenditures and the development of new products. The Company had $56.4 million of available short-term credit lines at June 30, 2011.

Other Matters

     In the normal course of business, the Company is named in legal proceedings. There are currently no material legal proceedings pending with respect to the Company. The more significant legal proceedings are discussed below.

     The Company is subject to contingencies related to environmental laws and regulations. The Company is named as one of many potentially responsible parties in two landfill lawsuits and is in the process of resolving a claim related to a parcel of land adjoining the Company’s property. The landfill sites are impacted by the Federal Comprehensive Environmental Response, Compensation and Liability Act and other environmental laws and regulations. At this time, the Company does not believe the ultimate resolution of these matters will have a material adverse effect on the Company’s financial position or results of operations, either from a cash flow perspective or on the financial statements as a whole. Regarding the landfill sites, this belief is based on the Company’s assessment of its limited past involvement with these landfill sites as well as the substantial involvement of and government focus on other named third parties with these landfill sites. However, due to the inherent uncertainties of such proceedings, the Company cannot predict the ultimate outcome of any of these matters. A future change in circumstances with respect to these specific matters or with respect to sites formerly or currently owned or operated by the Company, off-site disposal locations used by the Company, and property owned by third parties that is near such sites, could result in future costs to the Company and such amounts could be material. Expenditures for compliance with environmental control provisions and regulations during 2010 and the first half of 2011 were not material.

     Like other companies in recent years, the Company has been named as a defendant in numerous multi-claimant/multi-defendant lawsuits alleging personal injury as a result of exposure to asbestos, manufactured by third parties, and integrated into or sold with a very limited number of the Company’s products. The Company is vigorously defending itself against these claims. Although it is not possible to predict the ultimate outcome of these matters, the Company does not believe the ultimate resolution of these issues will have a material adverse effect on the Company’s financial position or results of operations, either from a cash flow perspective or on the financial statements as a whole. This belief is based in part on the fact that no claimant has proven or substantially demonstrated asbestos exposure caused by products manufactured or sold by the Company and that a number of cases have been voluntarily dismissed.

     See the “Special Note Regarding Forward Looking Statements” at the front of this Quarterly Report on Form 10-Q and Part I, Item 1A “Risk Factors” in the Company’s Annual Report on Form 10-K for the year ended December 31, 2010 for a discussion of risks and uncertainties that could impact the Company’s financial performance and results of operations.

Off-Balance Sheet Arrangements and Contractual Obligations

     The Company’s off-balance sheet arrangements and contractual obligations are discussed in Part II, Item 7 “Management’s Discussion and Analysis of Financial Condition and Results of Operations” under the headings “Off-Balance Sheet Arrangements” and “Contractual Obligations” in the Company’s Annual Report on Form 10-K for the year ended December 31, 2010 and have not materially changed since that report was filed.

Item 3 Quantitative and Qualitative Disclosures about Market Risk

     The Company’s quantitative and qualitative disclosures about market risk are included in Part II, Item 7 “Management’s Discussion and Analysis of Financial Condition and Results of Operations” under the heading “Market Risks” in the Company’s Annual Report on Form 10-K for the year ended December 31, 2010 and have not materially changed since that report was filed.

Item 4 Controls and Procedures

Evaluation of Disclosure Controls and Procedures

     In accordance with Rule 13a-15(b) of the Securities Exchange Act of 1934 (the “Exchange Act”), the Company’s management evaluated, with the participation of the Company’s Chairman, President and Chief Executive Officer and the Company’s Senior Vice President — Finance, Chief Financial Officer and Treasurer, the effectiveness of the design and operation of the Company’s disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act) as of the end of the quarter ended June 30, 2011. Based upon their evaluation of these disclosure controls and procedures, the Company’s Chairman, President and Chief

Executive Officer and the Company’s Senior Vice President — Finance, Chief Financial Officer and Treasurer concluded that as of the date of such evaluation, the Company’s disclosure controls and procedures were effective.

Changes in Internal Control over Financial Reporting

     There was no change in the Company’s internal control over financial reporting that occurred during the quarter ended June 30, 2011 that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

Part II — Other Information

Item 6		Exhibits

Exhibit No.		Description
10.1		Badger Meter, Inc. 2011 Omnibus Incentive Plan. [Incorporated by reference to Exhibit (10.1) to Badger Meter, Inc.’s Current Report on Form 8-K, dated April 29, 2011 (Commission File No. 001-06706)]
10.2		Form of Nonqualified Stock Option Agreement under 2011 Omnibus Incentive Plan. [Incorporated by reference to Exhibit (10.2) to Badger Meter, Inc.’s Current Report on Form 8-K, dated April 29, 2011 (Commission File No. 001-06706)]
10.3		Form of Restricted Stock Award Agreement under 2011 Omnibus Incentive Plan. [Incorporated by reference to Exhibit (10.3) to Badger Meter, Inc.’s Current Report on Form 8-K, dated April 29, 2011 (Commission File No. 001-06706)]
31.1		Certification by the Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2		Certification by the Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32		Certification of Periodic Financial Report by the Chief Executive Officer and Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
101		The following materials from the Company’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2011 formatted in Extensible Business Reporting Language (XBRL): (i) the Consolidated Condensed Balance Sheets, (ii) the Consolidated Condensed Statements of Operations, (iii) the Consolidated Condensed Statements of Cash Flows and (iv) Notes to Unaudited Consolidated Condensed Financial Statements, tagged as blocks of text.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

BADGER METER, INC.

Quarterly Report on Form 10-Q for the Period Ended June 30, 2011

Exhibit Index

Exhibit No.		Description
10.1		Badger Meter, Inc. 2011 Omnibus Incentive Plan. [Incorporated by reference to Exhibit (10.1) to Badger Meter, Inc.’s Current Report on Form 8-K, dated April 29, 2011 (Commission File No. 001-06706)]
10.2		Form of Nonqualified Stock Option Agreement under 2011 Omnibus Incentive Plan. [Incorporated by reference to Exhibit (10.2) to Badger Meter, Inc.’s Current Report on Form 8-K, dated April 29, 2011 (Commission File No. 001-06706)]
10.3		Form of Restricted Stock Award Agreement under 2011 Omnibus Incentive Plan. [Incorporated by reference to Exhibit (10.3) to Badger Meter, Inc.’s Current Report on Form 8-K, dated April 29, 2011 (Commission File No. 001-06706)]
31.1		Certification by the Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2		Certification by the Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32		Certification of Periodic Financial Report by the Chief Executive Officer and Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
101		The following materials from the Company’s Quarterly Report on Form 10-Q for the quarter ended June 30, 2011 formatted in Extensible Business Reporting Language (XBRL): (i) the Consolidated Condensed Balance Sheets, (ii) the Consolidated Condensed Statements of Operations, (iii) the Consolidated Condensed Statements of Cash Flows and (iv) Notes to Unaudited Consolidated Condensed Financial Statements, tagged as blocks of text.