BALL Corp - Annual Report: 2017 (Form 10-K)

y

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D. C. 20549

 

FORM 10-K

 

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the fiscal year ended December 31, 2017

 

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from                                  to                                 

 

Commission File Number 001-07349

 

Ball Corporation

 

 

 

 

Registrant’s telephone number, including area code:  (303) 469-3131

 

Securities registered pursuant to Section 12(b) of the Act:

 

 

Securities registered pursuant to Section 12(g) of the Act:  NONE

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  YES ☒  NO ☐

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  YES ☐  NO ☒

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  YES ☒  NO ☐

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months.  YES ☒  NO ☐

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ☒

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act.

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).  YES ☐  NO ☒

 

The aggregate market value of voting stock held by non-affiliates of the registrant was $14.8 billion based upon the closing market price and common shares outstanding as of June 30, 2017.

 

Number of shares and rights outstanding as of the latest practicable date.

 

 

DOCUMENTS INCORPORATED BY REFERENCE

 

1.Proxy statement to be filed with the Commission within 120 days after December 31, 2017, to the extent indicated in Part III.

 

 

 

Ball Corporation

ANNUAL REPORT ON FORM 10-K

For the year ended December 31, 2017

 

TABLE OF CONTENTS

 

 

 

 

 

PART I.

 

Item 1. Business

 

Ball Corporation and its consolidated subsidiaries (collectively, Ball, the company, we or our) is one of the world’s leading suppliers of metal packaging to the beverage, food, personal care and household products industries. The company was organized in 1880 and incorporated in the state of Indiana, United States of America (U.S.), in 1922. Our packaging products are produced for a variety of end uses and are manufactured in facilities around the world. We also provide aerospace and other technologies and services to governmental and commercial customers within our aerospace segment. In 2017, our total consolidated net sales were $11 billion. Our packaging businesses were responsible for 91 percent of our net sales, with the remaining 9 percent contributed by our aerospace business.

 

Our largest product line is aluminum beverage containers. We also produce steel food and aerosol containers, extruded aluminum aerosol containers and aluminum slugs.

 

We sell our packaging products mainly to large multinational beverage, food, personal care and household products companies with which we have developed long-term relationships. This is evidenced by our high customer retention and large number of long-term supply contracts. While we have a diversified customer base, we sell a significant portion of our packaging products to major companies and brands, as well as to numerous regional customers. Our significant customers include: The Coca-Cola Company and its affiliated bottlers, Anheuser-Busch InBev n.v./s.a., Molson Coors Brewing Company and Unilever N.V.

 

Our aerospace business is a leader in the design, development and manufacture of innovative aerospace systems for civil, commercial and national cyber security aerospace markets. It produces spacecraft, instruments and sensors, radio frequency systems and components, data exploitation solutions and a variety of advanced aerospace technologies and products that enable deep space missions.

 

We are headquartered in Broomfield, Colorado, and our stock is listed for trading on the New York Stock Exchange under the ticker symbol BLL.

 

Our Strategy

 

Our overall business strategy is defined by our Drive for 10 vision, which at its highest level, is a mindset around perfection, with a greater sense of urgency around our future success. Launched in 2011, our Drive for 10 vision encompasses five strategic levers that are key to growing our businesses and achieving long-term success. These five levers are:

 

 

We also maintain a clear and disciplined financial strategy focused on improving shareholder returns through:

 

 

The cash generated by our businesses is used primarily: (1) to finance the company’s operations, (2) to fund strategic capital investments, (3) to service the company’s debt and (4) to return value to our shareholders via stock buy-backs and dividend payments. From time to time, we have evaluated and expect to continue to evaluate possible transactions that we believe will benefit the company and our shareholders, which may include strategic acquisitions, divestitures of parts of our company or joint ventures. At any time we may be engaged in discussions or negotiations with respect to possible transactions or may have entered into non-binding letters of intent. There can be no assurance if or when we

will enter into any such transactions or the terms of such transactions. The compensation of many of our employees is tied directly to the company’s performance through our EVA®-based incentive programs.

 

Our Reportable Segments

 

Ball Corporation reports its financial performance in five reportable segments: (1) beverage packaging, North and Central America; (2) beverage packaging, South America; (3) beverage packaging, Europe; (4) food and aerosol packaging and (5) aerospace. Ball also has investments in the U.S., Guatemala, Panama, South Korea and Vietnam that are accounted for using the equity method of accounting and, accordingly, those results are not included in segment sales or earnings. Financial information related to each of our segments is included in Note 3 to the consolidated financial statements within Item 8 of this Annual Report on Form 10-K (annual report).

 

Beverage Packaging, North and Central America, Segment

 

Beverage packaging, North and Central America is Ball’s largest segment, accounting for 38 percent of consolidated net sales in 2017. Metal beverage containers are primarily sold under multi-year supply contracts to fillers of carbonated soft drinks, beer, energy drinks and other beverages.

 

Metal beverage containers and ends are produced at 19 manufacturing facilities in the U.S., one in Canada and two in Mexico. Additionally, Rocky Mountain Metal Container, LLC, a joint venture owned 50 percent by Ball and 50 percent by a wholly owned subsidiary of Molson Coors Brewing Company, operates beverage container and end manufacturing facilities in Golden, Colorado. 

 

The North American beverage container manufacturing industry is relatively mature. Where growth or contractions are projected in certain markets or for certain products, Ball undertakes selected capacity increases or decreases primarily in its existing facilities to meet market demand. A meaningful portion of the industry-wide reduction in demand for standard 12-ounce aluminum cans for the carbonated soft drink market is being offset with growing demand for specialty container volumes from new and existing customers and consumer demand. During 2016, we began production at our newly constructed beverage can and end manufacturing facility in Monterrey, Mexico.

 

According to publicly available information and company estimates, the North America, beverage container industry represents approximately 110 billion units. Five companies manufacture substantially all of the metal beverage containers in the U.S., Canada and Mexico.  Ball produced approximately 46 billion recyclable aluminum beverage containers in North America in 2017, which represented approximately 40 percent of the aggregate production in these countries. Historically, sales volumes of metal beverage containers in North America tend to be highest during the period from April through September. All of the beverage containers produced by Ball in the U.S., Canada and Mexico are made of aluminum. In North and Central America, five suppliers provide the majority of our aluminum can and end sheet requirements.

 

Beverage containers are sold based on price, quality, service, innovation and sustainability in a highly competitive market, which is relatively capital intensive and characterized by facilities that run more or less continuously in order to operate profitably. In addition, the metal beverage container competes aggressively with other packaging materials which include meaningful industry positions by the glass bottle in the packaged beer industry and the polyethylene terephthalate (PET) bottle in the carbonated soft drink and water industries.

 

We believe we have limited our exposure to changes in the cost of aluminum ingot as a result of the inclusion of provisions in most metal beverage container sales contracts to pass through aluminum price changes, as well as through the use of derivative instruments.

 

In order to better align our manufacturing footprint to meet the needs of our customers, the company announced in July 2015 the closure of its Bristol, Virginia, beverage end-making facility. The Bristol facility, which ceased production at the end of June 2016, produced beverage ends in a variety of sizes and its capacity was transitioned to existing North American Ball end-making facilities. In December 2016, the company announced the closure of its Reidsville, North Carolina, beverage packaging plant. The Reidsville facility, which ceased production at the end of June 2017, produced beverage cans in a variety of sizes and its customers are now supplied by the company’s other U.S. facilities. During the third quarter of 2017, the company announced the closure of its beverage can manufacturing facilities in Chatsworth, California, and Longview, Texas, and its beverage end manufacturing facility in Birmingham, Alabama. The Birmingham plant is currently expected to cease production by the end of the second quarter of 2018, and the Longview

and Chatsworth plants are currently expected to cease production by the end of the third quarter of 2018. The capacity from these locations will be transitioned to other  North American Ball facilities. In order to serve growing customer demand for specialty cans in the southwestern U.S., the company is constructing a beverage packaging facility in Goodyear, Arizona, which is expected to begin production in the second quarter of 2018. 

 

Beverage Packaging, South America, Segment

 

The beverage packaging, South America, segment, accounted for 15 percent of Ball’s consolidated net sales in 2017. Our operations consist of 14 facilities, 12 in Brazil and one each in Argentina and Chile. For the countries where we operate, the South American beverage container market is approximately 29 billion containers, and we are the largest producer in this region with an estimated 55 percent of South American shipments in 2017. Four companies currently manufacture substantially all of the metal beverage containers in Brazil.

 

The company’s South American beverage facilities produced approximately 16 billion aluminum beverage containers in 2017. Historically, sales volumes of beverage containers in South America tend to be highest during the period from September through December. In South America, two suppliers provide virtually all our aluminum sheet requirements.

 

In order to support contracted volumes for aluminum beverage packaging across Paraguay, Argentina and Bolivia, the company will construct a one-line beverage can and end manufacturing plant in Paraguay, and will add capacity to its Buenos Aires, Argentina, facility. The Paraguay plant is expected to begin production in the fourth quarter of 2019. 

 

We believe we have limited our exposure to changes in the costs of aluminum ingot as a result of the inclusion of provisions in most metal beverage container sales contracts to pass through aluminum ingot price changes, as well as through the use of derivative instruments.

 

Beverage Packaging, Europe, Segment

 

The beverage packaging, Europe, segment, which accounted for 21 percent of Ball’s consolidated net sales in 2017.  Our European operations consist of 20 facilities throughout Europe. The European beverage container market is approximately 64 billion containers, including Russia, and we are the largest producer with an estimated 42 percent of European shipments. The European market is highly regional in terms of sales growth rates and packaging mix. Four companies manufacture substantially all of the metal beverage containers in Europe. Our European beverage facilities produced 27 billion beverage containers in 2017, the vast majority of which were produced from aluminum.

 

Historically, sales volumes of metal beverage containers in Europe tend to be highest during the period from May through August with a smaller increase in demand leading up to the winter holiday season in the U.K. offset by much lower demand in Russia. Much like other parts of the world, the metal beverage container competes aggressively with other packaging materials used by the European beer and carbonated soft drink industries. The glass bottle is heavily utilized in the packaged beer industry, while the PET container is utilized in the carbonated soft drink, beer, juice and water industries.

 

European raw material supply contracts generally have longer term agreements. In Europe, five aluminum suppliers and two steel suppliers provide almost all of our requirements. Aluminum is traded primarily in U.S. dollars, while the functional currencies of our European operations are various other currencies. The company minimizes its exchange rate risk using derivative and supply contracts in local currencies. Purchase and sales contracts generally include fixed-price, floating or pass-through aluminum ingot component pricing arrangements.

 

In order to support strong growth for beverage cans in the Iberian Peninsula, the company is constructing a two-line, aluminum beverage can manufacturing facility near Madrid, Spain, with the majority of the new capacity secured under a long-term customer contract. The facility is expected to be fully operational in mid-2018 and will produce multiple can sizes. In the third quarter of 2017, our beverage packaging container and end production facilities in Recklinghausen, Germany, ceased production, and the capacity was transitioned to existing European Ball facilities. 

 

Food and Aerosol Packaging Segment

 

The food and aerosol packaging segment accounted for 10 percent of consolidated net sales in 2017. Ball produces two-piece and three-piece steel food containers and ends for packaging vegetables, fruit, soups, meat, seafood, nutritional products, pet food and other products. The segment also manufactures and sells steel aerosol containers, as well as

extruded aluminum aerosol containers and aluminum slugs. There are 10 facilities in the U.S., four in Europe, two in Argentina, one in Canada, one in Mexico and one in India that manufacture these products.

 

We estimate our steel aerosol business accounted for 34 percent of total annual U.S. and Canadian steel aerosol shipments in 2017. In the U.S. and Canada, we are the leading supplier of aluminum slugs used in the production of extruded aluminum aerosol containers and estimate our percentage of the total industry shipments to be 77 percent. We estimate our extruded aluminum aerosol business accounted for 21 percent of total annual North American extruded aluminum aerosol shipments in 2017. Ball’s European aluminum aerosol shipments represented 20 percent of total European industry shipments in 2017. Historically, sales volumes of metal food containers in North America tend to be highest from May through October as a result of seasonal fruit, vegetable and salmon packs. We estimate our 2017 shipments of 3 billion steel food containers to be 11 percent of total U.S. and Canadian metal food container shipments.

 

Cost containment and maximizing asset utilization are crucial to maintaining profitability in the metal food and aerosol container manufacturing industries and Ball is focused on doing so. During the first quarter of 2016, the company announced the closure of its food and aerosol packaging flat sheet production and end-making facility in Weirton, West Virginia, which ceased production in the first quarter of 2017, and its production capacity was consolidated into other Ball facilities in the U.S. In October 2016, the company sold its specialty tin manufacturing facility in Baltimore, Maryland. In March 2017, the company sold its paint and general line can plant in Hubbard, Ohio.

 

Competition in the U.S. steel aerosol container market primarily includes three other national suppliers. Competitors in the metal food container industry include three national and a small number of regional suppliers and self-manufacturers. Several producers in Mexico also manufacture steel food containers. Steel containers also compete with other packaging materials in the food and aerosol products industry including glass, aluminum, plastic, paper and pouches. As a result, profitability for this product line is dependent on price, cost reduction, service and quality. Two steel suppliers provide approximately 58 percent of our tinplate steel. We believe we have limited our exposure related to changes in the costs of steel tinplate and aluminum as a result of the inclusion of provisions in many sales contracts to pass through steel and aluminum cost changes and the existence of certain other steel container sales contracts that incorporate annually negotiated metal costs. We also mitigate aluminum cost changes through our self-supply of aluminum slugs and the use of aluminum scrap from our beverage can facilities.

 

Aerospace Segment

 

Ball’s aerospace segment, which accounted for 9 percent of consolidated net sales in 2017, includes national defense hardware, antenna and video tactical solutions, civil and operational space hardware and systems engineering services. The segment develops spacecraft, sensors and instruments, radio frequency systems and other advanced technologies for the civil, commercial and national security aerospace markets. The majority of the aerospace business involves work under contracts, generally from one to five years in duration, as a prime contractor or subcontractor for the U.S. Department of Defense (DoD), the National Aeronautics and Space Administration (NASA) and other U.S. government agencies. The company competes against both large and small prime contractors and subcontractors for these contracts. Contracts funded by the various agencies of the federal government represented 98 percent of segment sales in 2017.

 

Intense competition and long operating cycles are key characteristics of both the company’s business and the aerospace and defense industry. It is common in the aerospace and defense industry for work on major programs to be shared among a number of companies. A company competing to be a prime contractor may, upon ultimate award of the contract to a competitor, become a subcontractor for the ultimate prime contracting company. It is not unusual to compete for a contract award with a peer company and, simultaneously, perform as a supplier to or a customer of that same competitor on other contracts, or vice versa.

 

Geopolitical events and shifting executive and legislative branch priorities have resulted in an increase in opportunities over the past decade in areas matching our aerospace segment’s core capabilities in space hardware. The businesses include hardware and services sold primarily to U.S. customers, with emphasis on space science and exploration, environmental and earth sciences, and defense and intelligence applications. Major activities frequently involve the design, manufacture and testing of satellites, remote sensors and ground station control hardware and software, as well as related services such as launch vehicle integration and satellite operations.

 

Other hardware activities include target identification, warning and attitude control systems and components; cryogenic systems for reactant storage, and associated sensor cooling devices; star trackers, which are general-purpose stellar attitude sensors; and fast-steering mirrors. Additionally, the aerospace segment provides diversified technical services

and products to government agencies, prime contractors and commercial organizations for a broad range of information warfare, electronic warfare, avionics, intelligence, training and space system needs.

 

Contracted backlog in the aerospace segment was $1.75 billion and $1.4 billion at December 31, 2017 and 2016, respectively, and consisted of the aggregate contract value of firm orders, excluding amounts previously recognized as revenue. The 2017 contracted backlog includes $844 million expected to be recognized in revenues during 2018, with the remainder expected to be recognized in revenues in the years thereafter. Unfunded amounts included in backlog for certain firm government orders, which are subject to annual funding, were $1.3 billion and $846 million at December 31, 2017 and 2016, respectively. Year-over-year comparisons of backlog are not necessarily indicative of the trend of future operations due to the nature of varying delivery and milestone schedules on contracts, funding of programs and the uncertainty of timing of future contract awards. Uncertainties in the federal government budgeting process could delay the funding, or even result in cancellation of certain programs currently in our reported backlog.

 

Other

 

Other consists of non-reportable segments in Africa, the Middle East and Asia (AMEA) and Asia Pacific that manufacture and sell metal beverage containers.

 

AMEA

 

As part of the June 2016 Rexam acquisition, we added metal beverage container operations for the AMEA region, which consist of five aluminum container and end manufacturing facilities–two in India and one each in Egypt, Saudi Arabia and Turkey. The manufacturing facility in Saudi Arabia, Rexam United Arab Can Manufacturing Limited, is a joint venture 51 percent owned by Ball and consolidated in our results. The beverage container market in these countries produced 24 billion cans in 2017, and we are one of four major producers in this region with 17 percent of shipments. Additionally, Ball has an ownership interest in an equity joint venture in South Korea.

 

In 2015, Rexam announced the establishment of a second metal beverage container facility in Sri City, India, near Chennai, which began production in the second quarter of 2017.

 

Asia Pacific

 

The metal beverage container market in the People’s Republic of China (PRC) is 41 billion containers, of which Ball’s operations represented an estimated 14 percent in 2017. Our percentage of the industry makes us one of the largest manufacturers of metal beverage containers in the PRC. We, along with five other manufacturers, account for 78 percent of the production. Our operations include the manufacture of aluminum containers and ends in four facilities in the PRC and one aluminum container facility in Myanmar. Our aluminum can and end sheet requirements are provided by several suppliers.

 

In May 2014, we announced the expansion of our Asian operations with the construction of a new one-line beverage can manufacturing facility in Myanmar, which began production in the second quarter of 2016. Additionally, Ball has an ownership interest in an equity joint venture in Vietnam with Thai Beverage Can Limited, which manufactures two-piece aluminum cans and ends for beverages.

 

Patents

 

In the opinion of the company’s management, none of our active patents or groups of patents is material to the successful operation of our business as a whole. We manage our intellectual property portfolio to obtain the durations necessary to achieve our business objectives.

 

Research and Development

 

Research and development (R&D) efforts in our packaging segments are primarily directed toward packaging innovation, specifically the development of new features, sizes, shapes and types of containers, as well as new uses for existing containers. Other R&D efforts in these segments seek to improve manufacturing efficiencies and the overall sustainability of our products. Our packaging R&D activities are primarily conducted in a technical center located in Westminster, Colorado.

 

In our aerospace business, we continue to focus our R&D activities on the design, development and manufacture of innovative aerospace products and systems. This includes the production of spacecraft, instruments and sensors, radio frequency and system components, data exploitation solutions and a variety of advanced aerospace technologies and products that enable deep space missions. Our aerospace R&D activities are conducted at various locations in the U.S.

 

Additional information regarding company R&D activity is contained in Note 1 to the consolidated financial statements within Item 8 of this annual report, as well as in Item 2, “Properties.”

 

Sustainability

 

Sustainability is a key part of maximizing value at Ball. In our global operations, we focus our sustainability efforts on employee safety, energy, water, waste and air emissions. In addition to operational excellence, we identified product stewardship, talent management and community ambassadors as priorities for our corporate sustainability efforts. Information about our corporate sustainability management, goals and performance data are available at www.ball.com/sustainability.

 

By enhancing the unique sustainability credentials of our products along their life cycle, we position our metal containers as the most sustainable choice and help our customers grow their business. Because metal recycling saves resources and uses up to 20 times less energy than primary metal production, the biggest opportunity to further minimize the environmental impacts of metal packaging is to increase recycling rates. Aluminum and steel are infinitely recyclable materials. They also have the highest scrap value of all commonly used packaging substrates. In 2017, aluminum beverage cans were confirmed to be the most recycled beverage package in the world, with a global weighted average recycling rate for aluminum at 69 percent. In comparison, 43 percent of PET and 46 percent of glass bottles were collected for recycling, although not necessarily recycled. In some of Ball’s markets such as Brazil, China and several European countries, recycling rates for aluminum beverage cans are at or above 90 percent. The most recently available recycling rates in Europe are 73 percent for aluminum beverage containers in 2014 and 78 percent for steel containers in 2015. The most recently available recycling rates in the U.S. are 49 percent for aluminum beverage cans in 2016 and 71 percent for steel cans in 2014.  

 

In markets where recycling rates are below expectations, we help establish and financially support packaging collection and recycling initiatives. These typically focus on collaborating with public and private partners to create effective collection and recycling systems, including education of consumers about the benefits of metal packaging. For details about programs we support, please visit www.ball.com/recycling.

 

Employee Relations

 

At the end of 2017, the company and its subsidiaries employed approximately 18,300 employees, including 8,100 employees in the U.S. Details of collective bargaining agreements are included within Item 1A, Risk Factors, of this annual report.

 

Where to Find More Information

 

Ball Corporation is subject to the reporting and other information requirements of the Securities Exchange Act of 1934, as amended (Exchange Act). Reports and other information filed with the Securities and Exchange Commission (SEC) pursuant to the Exchange Act may be inspected and copied at the public reference facility maintained by the SEC in Washington, D.C. The SEC maintains a website at www.sec.gov containing our reports, proxy materials and other items. The company also maintains a website at www.ball.com/investors on which it provides a link to access Ball’s SEC reports free of charge, under the link “Financials.”

 

The company has established written Ball Corporation Corporate Governance Guidelines; a Ball Corporation Executive Officers and Board of Directors Business Ethics Statement; a Business Ethics Code of Conduct; and charters for its Audit Committee, Nominating/Corporate Governance Committee, Human Resources Committee and Finance Committee. These documents are on the company’s website at www.ball.com/investors, under the link “Corporate Governance.” A copy may also be obtained upon request from the company’s corporate secretary. The company’s sustainability report and updates on Ball’s progress are available at www.ball.com/sustainability.

 

The company intends to post on its website the nature of any amendments to the company’s codes of ethics that apply to executive officers and directors, including the chief executive officer, chief financial officer and controller, and the

nature of any waiver or implied waiver from any code of ethics granted by the company to any executive officer or director. These postings will appear on the company’s website at www.ball.com/investors, under the link “Corporate Governance.”

 

Item 1A.  Risk Factors

 

Any of the following risks could materially and adversely affect our business, financial condition or results of operations.

 

We may not realize all of the anticipated benefits of the acquisition of Rexam, or those benefits may take longer to realize than expected. We may also encounter significant unexpected difficulties in integrating the two businesses.

 

Our ability to realize the anticipated benefits of the acquisition of Rexam will depend, to a large extent, on our ability to integrate our beverage packaging business with Rexam’s business. Combining two independent businesses is a complex, costly and time-consuming process. As a result, we are required to devote significant management attention and resources to integrating the business practices and operations of the company and the Rexam business we acquired. The integration process may disrupt the combined business and, if implemented ineffectively, could preclude the realization of the full benefits of the acquisition that are currently expected. Our failure to meet the challenges involved in integrating the two businesses and to realize the anticipated benefits of the acquisition could cause an interruption of, or a loss of momentum in, the activities of the company and could adversely affect the company’s results of operations. In addition, the overall integration of the businesses may result in material unanticipated problems, expenses, liabilities, competitive responses, loss of customer relationships and diversion of management’s attention. The possible difficulties of combining the operations of the companies also include, among others:

 

 

Many of these factors are or will be outside of our control and any one of them could result in increased costs, decreases in the amount of expected revenues and diversion of management’s time and energy, which could materially impact the business, financial condition and results of operations of the company. In addition, even if the operations of the businesses of the company and Rexam are integrated successfully, we may not realize the full benefits of the acquisition, including the synergies, cost savings or sales or growth opportunities that we expect, or the full benefits may not be achieved within the anticipated time frame, or at all. Additional unanticipated costs may be incurred in the integration of the businesses of the company and Rexam. All of these factors could adversely affect the earnings of the company, decrease or delay the expected accretive effect of the acquisition, or negatively impact the price of the company’s common stock. As a result, we cannot assure that the combination of the company’s and Rexam’s beverage packaging businesses will result in the realization of the full benefits anticipated from the acquisition.

 

In connection with satisfying requirements under the antitrust laws of the U.S., the European Union and Brazil, and obtaining associated approvals and clearances, we were required to effect significant divestitures. As a result of the required divestitures, we may not realize all or a significant portion of the anticipated benefits of the Rexam acquisition, including anticipated synergies, and the company may otherwise suffer other negative consequences that may materially and adversely affect the company’s business, financial condition and results of operations and, to the extent that the current price of the company’s common stock reflects an assumption that the anticipated benefits of the acquisition will be realized, the price per share for the company’s common stock could be negatively impacted.

 

We have a significant level of debt that could have important consequences for our business and any investment in our securities.

 

The company had $7 billion of interest-bearing debt at December 31, 2017. Such indebtedness could have significant consequences for our business and any investment in our securities, including:

 

 

Our business, operating results and financial condition are subject to particular risks in certain regions of the world.

 

We may experience an operating loss in one or more regions of the world for one or more periods, which could have a material adverse effect on our business, operating results or financial condition. Moreover, overcapacity, which often leads to lower prices, exists in certain regions in which we operate and may persist even if demand grows. Our ability to manage such operational fluctuations and to maintain adequate long-term strategies in the face of such developments will be critical to our continued growth and profitability.

 

The loss of a key customer, or a reduction in its requirements, could have a significant negative impact on our sales.

 

We sell a majority of our packaging products to a relatively limited number of major beverage, packaged food, personal care and household product companies, some of which operate in multiple geographical markets we serve.

 

Although the majority of our customer contracts are long-term, these contracts, unless they are renewed, expire in accordance with their respective terms and are terminable under certain circumstances, such as our failure to meet quality, volume or market pricing requirements. Because we depend on a relatively limited number of major customers, our business, financial condition or results of operations could be adversely affected by the loss of any of these customers, a reduction in the purchasing levels of these customers, a strike or work stoppage by a significant number of these customers’ employees or an adverse change in the terms of the supply agreements with these customers.

 

The primary customers for our aerospace segment are U.S. government agencies or their prime contractors. Our contracts with these customers are subject to several risks, including funding cuts and delays, technical uncertainties, budget changes, government shutdowns, competitive activity and changes in scope.

 

We face competitive risks from many sources that may negatively impact our profitability.

 

Competition within the packaging and aerospace industries is intense. Increases in productivity, combined with existing or potential surplus capacity in the industry, have maintained competitive pricing pressures. The principal methods of competition in the general packaging industry are price, innovation, sustainability, service and quality. In the aerospace industry, they are technical capability, cost and schedule. Some of our competitors may have greater financial, technical and marketing resources, and some may currently have significant excess capacity. Our current or potential competitors may offer products at a lower price or products that are deemed superior to ours. The global economic environment has resulted in reductions in demand for our products in some instances, which, in turn, could increase these competitive pressures.

 

We are subject to competition from alternative products, which could result in lower profits and reduced cash flows.

 

Our metal packaging products are subject to significant competition from substitute products, particularly plastic carbonated soft drink bottles made from PET, single serve beer bottles and other food and beverage containers made of glass, cardboard or other materials. Competition from plastic carbonated soft drink bottles is particularly intense in the U.S., Europe and the PRC. Certain of our aerospace products are also subject to competition from alternative products

and solutions. There can be no assurance that our products will successfully compete against alternative products, which could result in a reduction in our profits or cash flow.

 

Our packaging businesses have a narrow product range, and our business would suffer if usage of our products decreased or if decreases occur in the demand for the beverages, food and other goods filled in our products.

 

For the year ended December 31, 2017, 81 percent of our consolidated net sales were from the sale of beverage containers, and we expect to derive a significant portion of our future revenues and cash flows from the sale of beverage containers. Our business would suffer if the use of beverage containers decreased. Accordingly, broad acceptance by consumers of aluminum and steel containers for a wide variety of beverages is critical to our future success. If demand for glass and PET bottles increases relative to metal containers, or the demand for aluminum and steel containers does not develop as expected, our business, financial condition or results of operations could be materially adversely affected.

 

Changes in laws and governmental regulations may adversely affect our business and operations.

 

We and our customers and suppliers are subject to various federal, state, provincial and local laws and regulations, which have been increasing in number and complexity. Each of our, and their, facilities is subject to federal, state, provincial and local licensing and regulation by health, environmental, workplace safety and other agencies in multiple jurisdictions. Requirements of worldwide governmental authorities with respect to manufacturing, manufacturing facility locations within the jurisdiction, product content and safety, climate change, workplace safety and health, environmental, expropriation of assets and other standards could adversely affect our ability to manufacture or sell our products, and the ability of our customers and suppliers to manufacture and sell their products. In addition, we face risks arising from compliance with and enforcement of numerous and complex federal, state, provincial and local laws and regulations.

 

Enacted regulatory developments regarding the reporting and use of “conflict minerals” mined from the Democratic Republic of the Congo and adjoining countries could affect the sourcing, availability and price of minerals used in the manufacture of certain of our products. As a result, there may only be a limited pool of suppliers who provide conflict-free materials, and we cannot give assurance that we will be able to obtain such products in sufficient quantities or at competitive prices. Also, because our supply chains are complex, we may face reputational challenges with our customers and other stakeholders if we are unable to sufficiently verify the origins of all materials used in the products that we sell. The compliance and reporting aspects of these regulations may result in incremental costs to the company. While deposit systems and other container-related legislation have been adopted in some jurisdictions, similar legislation has been defeated in public referenda and legislative bodies in many others. We anticipate that continuing efforts will be made to consider and adopt such legislation in the future. The packages we produce are widely used and perform well in U.S. states, Canadian provinces and European countries that have deposit systems, as well as in other countries worldwide.

 

Significant environmental, employment-related and other legislation and regulatory requirements exist and are also evolving. The compliance costs associated with current and proposed laws and potential regulations could be substantial, and any failure or alleged failure to comply with these laws or regulations could lead to litigation or governmental action, all of which could adversely affect our financial condition or results of operations.

 

Our business, financial condition and results of operations are subject to risks resulting from broader geographic operations.

 

We derived 50 percent of our consolidated net sales from outside of the U.S. for the year ended December 31, 2017. The sizeable scope of operations outside of the U.S. may lead to more volatile financial results and make it more difficult for us to manage our business. Reasons for this include, but are not limited to, the following:

 

 

Any of these factors, many of which are present in both the U.S. and other countries, could materially adversely affect our business, financial condition or results of operations.

 

We are exposed to exchange rate fluctuations.

 

The financial results of the company are exposed to currency exchange rate fluctuations and an increased proportion of assets, liabilities and earnings denominated in non-U.S. dollar currencies. The company presents its financial statements in U.S. dollars and has a significant proportion of its net assets, debt and income in non-U.S. dollar currencies, primarily the euro, as well as the Russian ruble and other emerging market currencies. The company’s financial results and capital ratios are therefore sensitive to movements in foreign exchange rates.

 

We manage our exposure to currency fluctuations, particularly our exposure to fluctuations in the euro to U.S. dollar exchange rate to attempt to mitigate the effect of cash flow and earnings volatility associated with exchange rate changes. We primarily use forward contracts and options to manage our currency exposures and, as a result, we experience gains and losses on these derivative positions offset, in part, by the impact of currency fluctuations on existing assets and liabilities. Our inability to properly manage our exposure to currency fluctuations could materially impact our results.

 

If we fail to retain key management and personnel, we may be unable to implement our key objectives.

 

We believe our future success depends, in part, on our experienced management team. Unforeseen losses of key members of our management team without appropriate succession and/or compensation planning could make it difficult for us to manage our business and meet our objectives.

 

Decreases in our ability to develop or apply new technology and know-how may affect our competitiveness.

 

Our success depends partially on our ability to improve production processes and services. We must also introduce new products and services to meet changing customer needs. If we are unable to implement better production processes or to develop new products through research and development or licensing of new technology, we may not be able to remain competitive with other manufacturers. As a result, our business, financial condition or results of operations could be adversely affected.

 

Adverse weather and climate changes may result in lower sales.

 

We manufacture packaging products primarily for beverages and foods. Unseasonably cool weather can reduce demand for certain beverages packaged in our containers. In addition, poor weather conditions or changes in climate that reduce crop yields of fruits and vegetables can adversely affect demand for our food containers. Climate change could have various effects on the demand for our products and the costs of inputs to our production in different regions around the world.

 

We are vulnerable to fluctuations in the supply and price of raw materials.

 

We purchase aluminum, steel and other raw materials and packaging supplies from several sources. While all such materials are available from independent suppliers, raw materials are subject to fluctuations in price and availability attributable to a number of factors, including general economic conditions, commodity price fluctuations (particularly aluminum on the London Metal Exchange), the demand by other industries for the same raw materials and the availability of complementary and substitute materials. Although we enter into commodities purchase agreements from time to time and sometimes use derivative instruments to seek to manage our risk, we cannot ensure that our current suppliers of raw materials will be able to supply us with sufficient quantities at reasonable prices. Economic and financial factors could impact our suppliers, thereby causing supply shortages. Increases in raw material costs could have a material adverse effect on our business, financial condition or results of operations. In the Americas, Europe and Asia, some contracts do not allow us to pass along increased raw material costs and we generally use derivative agreements to seek to manage this risk. Our hedging procedures may be insufficient and our results could be materially impacted if costs of materials increase. Due to the fixed-price contracts and derivative activities, while increasing raw material costs may not impact our near-term profitability, increased prices could decrease our sales volume over time.

 

Prolonged work stoppages at facilities with union employees could jeopardize our financial position.

 

As of December 31, 2017, 22 percent of our North American packaging facility employees and 59 percent of our European employees were covered by collective bargaining agreements. These collective bargaining agreements have staggered expirations during the next several years. Although we consider our employee relations to be generally good, a prolonged work stoppage or strike at any facility with union employees could have a material adverse effect on our business, financial condition or results of operations. In addition, we cannot ensure that upon the expiration of existing collective bargaining agreements, new agreements will be reached without union action or that any such new agreements will be on terms satisfactory to us.

 

Our aerospace segment is subject to certain risks specific to that business.

 

In our aerospace business, U.S. government contracts are subject to reduction or modification in the event of changes in requirements, and the government may also terminate contracts at its convenience pursuant to standard termination provisions. In such instances, Ball may be entitled to reimbursement for allowable costs and profits on authorized work that has been performed through the date of termination.

 

In addition, budgetary constraints and government shutdowns may result in further reductions to projected spending levels by the U.S. government. In particular, government expenditures are subject to the potential for automatic reductions, generally referred to as “sequestration.” Sequestration may occur in any given year, resulting in significant additional reductions to spending by various U.S government defense and aerospace agencies on both existing and new contracts, as well as the disruption of ongoing programs. Even if sequestration does not occur, we expect that budgetary constraints and ongoing concerns regarding the U.S. national debt will continue to place downward pressure on agency spending levels. Due to these and other factors, overall spending on various programs could decline, which could result in significant reductions to revenue, cash flows, net earnings and backlog primarily in our aerospace segment.

 

We use estimates in accounting for many of our programs in our aerospace business, and changes in our estimates could adversely affect our future financial results.

 

We account for sales and profits on the majority of long-term contracts in our aerospace business in accordance with the percentage-of-completion method of accounting, using the cumulative catch-up method to account for updates in estimates. The percentage-of-completion method of accounting involves the use of various estimating techniques to project revenues and costs at completion and various assumptions and projections relative to the outcome of future events, including the quantity and timing of product deliveries, future labor performance and rates, and material and overhead costs. These assumptions involve various levels of expected performance improvements. Under the cumulative catch-up method, the impact of updates in our estimates related to units shipped to date is recognized immediately.

 

Because of the significance of the judgments and estimates described above, it is likely that we could record materially different amounts if we used different assumptions or if the underlying circumstances or estimates were to change. Accordingly, updates in underlying assumptions, circumstances or estimates may materially affect our future financial performance.

 

Our backlog includes both cost-type and fixed-price contracts. Cost-type contracts generally have lower profit margins than fixed-price contracts. Our earnings and margins may vary depending on the types of government contracts undertaken, the nature of the work performed under those contracts, the costs incurred in performing the work, the achievement of other performance objectives and their impact on our ability to receive fees. The fixed-price contracts could subject us to losses if we have cost overruns or if increases in our costs exceed the applicable escalation rate.

 

As a U.S. government contractor, we could be adversely affected by changes in regulations or any negative findings from a U.S. government audit or investigation.

 

Our aerospace business operates in a highly regulated environment and is routinely audited and reviewed by the U.S. government and its agencies, such as the Defense Contract Audit Agency (DCAA) and Defense Contract Management Agency (DCMA). These agencies review performance under our contracts, our cost structure and our compliance with applicable laws, regulations and standards, as well as the adequacy of, and our compliance with, our internal control systems and policies. Business systems that are subject to review under the DoD Federal Acquisition Regulation Supplement (DFARS) are purchasing, estimating, material management and accounting, as well as property and earned value management. Any costs ultimately found to be unallowable or improperly allocated to a specific contract will not

be reimbursed or must be refunded if already reimbursed. If an audit uncovers improper or illegal activities, we may be subject to civil and criminal penalties, sanctions or suspension or debarment from doing business with the U.S. government. Whether or not illegal activities are alleged, the U.S. government also has the ability to decrease or withhold certain payments when it deems systems subject to its review to be inadequate. If such actions were to result in suspension or debarment, this could have a material adverse effect on our business. 

 

Our business is subject to substantial environmental remediation and compliance costs.

 

Our operations are subject to federal, state, provincial and local laws and regulations in multiple jurisdictions relating to environmental hazards, such as emissions to air, discharges to water, the handling and disposal of hazardous and solid wastes and the clean-up of hazardous substances. We have been designated, along with numerous other companies, as a potentially responsible party for the clean-up of several hazardous waste sites. Based on available information, we do not believe that any costs incurred in connection with such sites will have a material adverse effect on our financial condition, results of operations, capital expenditures or competitive position. There is increased focus on the regulation of greenhouse gas emissions and other environmental issues worldwide.

 

Our business faces the potential of increased regulation on some of the raw materials utilized in our packaging operations.

 

Our operations are subject to federal, state, provincial and local laws and regulations in multiple jurisdictions relating to some of the raw materials, such as epoxy-based coatings utilized in our container making process. Epoxy-based coatings may contain Bisphenol-A (BPA). Scientific evidence evaluated by regulatory agencies in the U.S., Canada, Europe, Japan, Australia and New Zealand has consistently shown these coatings to be safe for food contact at current levels, and these regulatory agencies have stated that human exposure to BPA from epoxy-based container coatings is well below safe exposure limits set by government bodies worldwide. A significant change in these regulatory agency statements, adverse information concerning BPA, or rulings made within certain federal, state, provincial and local jurisdictions could have a material adverse effect on our business, financial condition or results of operations. Ball recognizes that significant interest exists in non-epoxy based coatings, and we have been proactively working with coatings suppliers and our customers to evaluate alternatives to current coatings.

 

Net earnings and net assets could be materially affected by an impairment of goodwill.

 

We have a significant amount of goodwill recorded on the consolidated balance sheet as of December 31, 2017. We are required at least annually to test the recoverability of goodwill. The recoverability test of goodwill is based on the current fair value of our identified reporting units. Fair value measurement requires assumptions and estimates of many critical factors, including revenue and market growth, operating cash flows and discount rates. If general market conditions deteriorate in portions of our business, we could experience a significant decline in the fair value of reporting units. This decline could lead to an impairment of all or a significant portion of the goodwill balance, which could materially affect our U.S. GAAP net earnings and net assets. We continue to see the industry supply of beverage packaging exceed demand in China, resulting in significant pricing pressure and negative impacts on the profitability of our beverage packaging, Asia Pacific, reporting unit. If it becomes an expectation that this situation will continue for an extended period of time, it may result in a noncash impairment of some or all of the goodwill associated with this reporting unit, totaling $78 million at December 31, 2017. The company’s annual goodwill impairment test completed in the fourth quarter of 2017 indicated the estimated fair value of the beverage packaging, Asia Pacific, reporting unit exceeded its carrying amount, including goodwill, by 24 percent.

 

If the investments in Ball’s pension plans, or in the multi-employer pension plans in which Ball participates, do not perform as expected, we may have to contribute additional amounts to the plans, which would otherwise be available for other general corporate purposes.

 

Ball maintains defined benefit pension plans covering substantially all of its North American and United Kingdom employees, which are funded based on certain actuarial assumptions. The plans’ assets consist primarily of common stocks, fixed-income securities and, in the U.S., alternative investments. Market declines, longevity increases or legislative changes, such as the Pension Protection Act in the U.S., could result in a prospective decrease in our available cash flow and net earnings over time, and the recognition of an increase in our pension obligations could result in a reduction to our shareholders’ equity. Additional risks exist related to the company’s participation in multi-employer pension plans. Assets contributed to a multi-employer pension plan by one employer may be used to provide benefits to employees of other participating employers. If a participating employer in a multi-employer pension plan stops 

contributing to the plan, the unfunded obligations of the plan may be borne by the remaining participants. This could result in increases to our contributions to the plans as well as pension expense.

 

Restricted access to capital markets could adversely affect our short-term liquidity and prevent us from fulfilling our obligations under the notes issued pursuant to our bond indentures.

 

A reduction in global market liquidity could:

 

 

If market interest rates increase, our variable-rate debt will create higher debt service requirements, which would adversely affect our cash flow. While we sometimes enter into agreements limiting our exposure, any such agreements may not offer complete protection from this risk.

 

The global credit, financial and economic environment could have a negative impact on our results of operations, financial position or cash flows.

 

The overall credit, financial and economic environment could have significant negative effects on our operations, including:

 

 

Changes in U.S. generally accepted accounting principles (U.S. GAAP) and SEC rules and regulations could materially impact our reported results.

 

U.S. GAAP and SEC accounting and reporting changes are common and have become more frequent and significant over the past several years. These changes could have significant effects on our reported results when compared to prior periods and other companies and may even require us to retrospectively adjust prior periods. Additionally, material changes to the presentation of transactions in the consolidated financial statements could impact key ratios that analysts and credit rating agencies use to rate Ball and ultimately impact our ability to access the credit markets in an efficient manner.

 

Earnings and cash flows can be impacted by changes in tax laws.

 

As a U.S.-based multinational business, the company is subject to income tax in the U.S. and numerous jurisdictions outside the U.S. The relevant tax rules and regulations are complex, often changing and, in some cases, are interdependent. If these or other tax rules and regulations should change, the company’s earnings and cash flows could be impacted.

 

In particular, the U.S. Tax Cuts and Jobs Act (the Act), which was signed into law on December 22, 2017, may result in fluctuations in the company’s net earnings and cash flows. The Act introduced major changes to U.S. income tax law

that require significant judgment to interpret the impact of the provisions of the Act on the company’s financial results.

Due to the timing of its enactment and the complexity associated with the provisions of the Act, the company has made reasonable estimates of its effects where possible and has recorded provisional estimates in its financial statements for the year ended December 31, 2017. The Internal Revenue Service and the U.S. Treasury Department may issue subsequent guidance on the provisions of the Act that differs from our current interpretations. As we continue to collect data, prepare analyses, and interpret additional guidance provided by standard-setting bodies, we may make adjustments to these provisional estimates that could materially affect the company’s financial results.  

 

The company’s worldwide provision for income taxes is determined, in part, through the use of significant estimates and judgments. Numerous transactions arise in the ordinary course of business where the ultimate tax determination is uncertain. The company undergoes tax examinations by various worldwide tax authorities on a regular basis. While the company believes its estimates of its tax obligations are reasonable, the final outcome after the conclusion of any tax examinations and any litigation could be materially different from what has been reflected in the company’s historical financial statements.

 

Increased information technology (IT) security threats and more sophisticated and targeted computer crime could pose a risk to our systems, networks, products, solutions and services.

 

Increased global IT security threats and more sophisticated and targeted computer crime pose a risk to the security of our systems and networks and the confidentiality, availability and integrity of our data. While we attempt to mitigate these risks by employing a number of measures, including employee training, comprehensive monitoring of our networks and systems, and maintenance of backup and protective systems, our systems, networks, products, solutions and services remain potentially vulnerable to advanced persistent threats. Depending on their nature and scope, such threats could potentially lead to the compromise of confidential information, improper use of our systems and networks, manipulation and destruction of data, defective products, production downtimes and operational disruptions, which in turn could adversely affect our reputation, competitiveness and results of operations.

 

A material weakness in our internal control over financial reporting could, if not remediated, result in material misstatements in our financial statements.

 

Management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rule 13a-15(f) under the Securities Exchange Act. As disclosed in Item 9A in the 2016 Form 10-K filing and Item 4 of the subsequent 2017 Form 10-Q filings, management identified a material weakness in internal control over financial reporting connected to deficiencies associated with the accounting for income taxes related to the sale of some of the company’s existing beverage packaging businesses and select beverage can assets of Rexam (the Divestment Business) and the discrete income tax effects related to the acquisition of Rexam. A material weakness is defined as a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of annual or interim financial statements will not be prevented or detected on a timely basis. As a result of this material weakness, management concluded that internal control over financial reporting was not effective based on criteria set forth by the Committee of Sponsoring Organization of the Treadway Commission in “Internal Control—An Integrated Framework  (2013).” During 2017, we proactively implemented a remediation plan designed to address this material weakness, which has been evaluated, and the material weakness is now considered remediated. If remedial measures are insufficient to address the material weakness, or if additional material weaknesses in internal control are discovered or occur in the future, our consolidated financial statements may contain material misstatements and we could be required to restate our financial results.

 

Significant developments stemming from the U.K’s referendum on membership in the EU could have a material adverse effect on us.

 

In June 2016, the U.K. held a referendum and voted in favor of leaving the European Union (EU). This referendum has created political and economic uncertainty, particularly in the U.K. and the EU, and this uncertainty may last for years, particularly as the U.K. and the EU continue to negotiate the terms of withdrawal from the EU. Our business in the U.K., the EU and worldwide could be affected during this period of uncertainty, and perhaps longer, by the impact of the U.K.’s referendum and withdrawal from the EU. There are many ways in which our business could be affected, only some of which we can identify at the present time.

 

The referendum, and the likely withdrawal of the U.K. from the EU it triggers, has caused and, along with events that could occur in the future as a consequence of the U.K.’s withdrawal, including the possible breakup of the U.K. or the EU, may continue to cause significant volatility in global financial markets, including in global currency and debt markets. This volatility could cause a slowdown in economic activity in the U.K., Europe or globally, which could adversely affect our operating results and growth prospects. In addition, our business could be negatively affected by new trade agreements between the U.K. and other countries, including the U.S., and by the possible imposition of trade or other regulatory barriers in the U.K. These possible negative impacts, and others resulting from the U.K.’s actual or threatened withdrawal from the EU, may adversely affect our operating results and growth prospects.

 

Item 1B.  Unresolved Staff Comments

 

There were no matters required to be reported under this item.

 

Item 2.  Properties

 

The company’s properties described below are well maintained, and management considers them to be adequate and utilized for their intended purposes.

 

Ball’s corporate headquarters and the aerospace segment management offices are located in Broomfield, Colorado, U.S.. The operations of the aerospace segment occupy a variety of company-owned and leased facilities in Colorado, U.S., which together aggregate 1.7 million square feet of office, laboratory, research and development, engineering and test and manufacturing space. Other aerospace operations carry on business in smaller company owned and leased facilities in other U.S. locations outside of Colorado.

 

The offices of the company’s various North and Central American beverage and food and aerosol packaging operations are located in Westminster, Colorado, U.S.; the offices for the European beverage packaging operations are located in Luton, U.K.; the offices for AMEA beverage packaging operations are located in Dubai, United Arab Emirates; the offices for the Asia Pacific beverage packaging operations are located in Hong Kong; and the South America beverage packaging offices are located in Rio de Janeiro, Brazil. The company’s research and development facilities are primarily located in Westminster, Colorado, U.S.

 

Information regarding the approximate size of the manufacturing locations for significant packaging operations, which are owned or leased by the company, is set forth below. Facilities in the process of being constructed, or that have ceased

production, have been excluded from the list. Where certain locations include multiple facilities, the total approximate size for the location is noted. In addition to the facilities listed, the company leases other warehousing space.

 

(a) Includes both metal beverage container and metal food container manufacturing operations.

 

(a) Includes both metal beverage container and metal food container manufacturing operations.

 

Item 3.  Legal Proceedings

 

Details of the company’s legal proceedings are included in Note 21 to the consolidated financial statements within Item 8 of this annual report.

 

Item 4.  Mine Safety Disclosures

 

Not applicable.

 

Part II.

 

Item 5.  Market for the Registrant’s Common Stock and Related Stockholder Matters

 

Ball Corporation common stock (BLL) is listed for trading on the New York Stock Exchange. There were 5,737 common shareholders of record on February 20, 2018.

 

Common Stock Repurchases

 

The following table summarizes the company’s repurchases of its common stock during the quarter ended December 31, 2017.

 

(a)Includes any open market purchases (on a trade-date basis) and/or shares retained by the company to settle employee withholding tax liabilities.

(b)The company has an ongoing repurchase program for which shares are authorized from time to time by Ball’s Board of Directors. On January 29, 2014, the Board authorized the repurchase by the company of up to a total of 40 million shares, as retrospectively adjusted for the two-for-one stock split that was effective on May 16, 2017. This repurchase authorization replaced all previous authorizations.

 

Quarterly Stock Prices and Dividends

 

Quarterly prices for the company’s common stock, as reported on the New York Stock Exchange composite tape, and quarterly dividends in 2017 and 2016 (on a calendar quarter basis) were:

 

(a)Amounts in the first and second quarters of 2017 and all four quarters of 2016 have been retrospectively adjusted for the two-for-one stock split that was effective on May 16, 2017.    

 

Shareholder Return Performance

 

The line graph below compares the annual percentage change in Ball Corporation’s cumulative total shareholder return on its common stock with the cumulative total return of the Dow Jones Containers & Packaging Index and the S&P Composite 500 Stock Index for the five-year period ended December 31, 2017. It assumes $100 was invested on December 31, 2012, and that all dividends were reinvested. The Dow Jones Containers & Packaging Index total return has been weighted by market capitalization.

 

TOTAL RETURN TO STOCKHOLDERS

(Assumes $100 investment on 12/31/12)

Total Return Analysis

 

Source: Bloomberg L.P.® Charts

 

 

Item 6.  Selected Financial Data

 

Five-Year Review of Selected Financial Data

Ball Corporation

 

(a)Includes business consolidation and other activities and other items affecting comparability between years. Additional details regarding the 2017, 2016 and 2015 items are available in Note 5 to the consolidated financial statements within Item 8 of this Annual Report on Form 10-K.

(b)Non-U.S. GAAP measures should not be considered in isolation and should not be considered superior to, or a substitute for, financial measures calculated in accordance with U.S. GAAP. See below for reconciliations of non-U.S. GAAP financial measures to U.S. GAAP measures. Further discussion of non-GAAP financial measures is

available in Item 7 of this Annual  Report on Form 10-K under Management Performance Measurements and Other Liquidity Measures.

(c)Amounts in 2016, 2015, 2014 and 2013 have been retrospectively adjusted for the two-for-one stock split that was effective on May 16, 2017.

 

Reconciliations of non-U.S. GAAP financial measures to U.S. GAAP measures are as follows: