BSQUARE CORP /WA - Annual Report: 2011 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2011

OR

For the transition period from                      to                     

Commission file number: 000-27687

BSQUARE CORPORATION

(Exact name of registrant as specified in its charter)

110 110^th Avenue NE, Suite 200, Bellevue, Washington 98004

(Address of principal executive offices)

Registrant’s telephone number, including area code: (425) 519-5900

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

NONE

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Exchange Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

The aggregate market value of common stock held by non-affiliates of the registrant as of June 30, 2011 was approximately $65,000,000 based on the closing price of $6.27 per share of the registrant’s common stock as listed on the NASDAQ Global Select Market.

The number of shares of common stock outstanding as of January 31, 2012: 10,887,139.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the definitive proxy statement to be delivered to shareholders in connection with the annual meeting of shareholders to be held on June 13, 2012 are incorporated by reference into Part III of this Annual Report on Form 10-K.

Table of Contents

BSQUARE CORPORATION

FORM 10-K

TABLE OF CONTENTS

Table of Contents

PART I

FORWARD-LOOKING STATEMENTS

This Annual Report on Form 10-K, including any information incorporated by reference, contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, (the “Securities Act”), and Section 21E of the Securities Exchange Act of 1934, as amended, (the “Exchange Act”). In some cases, you can identify forward-looking statements by terms such as “may,” “will,” “should,” “expect,” “plan,” “intend,” “forecast,” “anticipate,” “believe,” “estimate,” “predict,” “potential,” “continue,” or the negative of these terms or other comparable terminology, which when used are meant to signify the statement as forward-looking. These forward-looking statements include, but are not limited to, statements about our plans, objectives, expectations and intentions and other statements that are not historical facts. These forward-looking statements are not guarantees of future performance and involve known and unknown risks, uncertainties and situations that are difficult to predict and that may cause our own, or our industry’s, actual results to be materially different from the future results that are expressed or implied by these statements. Accordingly, actual results may differ materially from those anticipated or expressed in such statements as a result of a variety of factors, including those set forth under Item 1A, “Risk Factors.” Such forward-looking statements include, but are not limited to, statements with respect to the following:

Readers are cautioned not to place undue reliance on forward-looking statements, which speak only as of the date made. Except as required by law, we undertake no obligation to update any forward-looking statement, whether as a result of new information, future events or otherwise. Readers, however, should carefully review the factors set forth in this and other reports or documents that we file from time to time with the Securities and Exchange Commission (“SEC”).

BUSINESS

Overview

As used in this Annual Report on Form 10-K, “we,” “us”, “our” and “the Company” refer to BSQUARE Corporation. We provide software solutions to companies that develop smart, connected devices. A smart, connected device is a dedicated purpose computing device that typically has a display, runs an operating system (e.g., Microsoft^® Windows^® CE or Google Android) and may be connected to a network via a wired or wireless

1

Table of Contents

connection. Examples of smart devices include set-top boxes, home gateways, point-of-sale terminals, kiosks, voting machines, gaming platforms, tablets, handheld data collection devices, personal media players, smart phones and devices targeted at automotive applications. We focus on smart devices that utilize embedded versions of the Microsoft Windows family of operating systems, specifically Windows Embedded Compact, Windows Embedded Standard and Windows Mobile™ as well as devices running other popular operating systems such as Android, Linux, and QNX.

We have been providing software solutions to the smart device marketplace since our inception. Our customers include world class original equipment manufacturers (“OEMs”), original design manufacturers (“ODMs”) and enterprises, as well as silicon vendors (“SVs”) and peripheral vendors which purchase our software solutions for purposes of facilitating processor and peripheral sales to the aforementioned customer categories. In the case of enterprises, our customers include those which develop, market and distribute smart devices on their own behalf as well as those that purchase devices from OEMs or ODMs and require additional device software or testing. The software solutions we provide are utilized and deployed throughout various phases of our customers’ device life cycle, including design, development, customization, quality assurance and deployment.

We were incorporated in the State of Washington in July 1994. Our principal office is located at 110 110th Avenue NE, Suite 200, Bellevue, Washington 98004, and our telephone number is (425) 519-5900.

Industry Background

The increasing opportunity for connectivity and exchange of data, information or multimedia content is driving demand for easy-to-use, cost-effective and customizable methods of electronic communication. Although the personal computer (“PC”) had historically been the traditional means of electronically connecting suppliers, partners, customers and consumers, the benefits of “smart devices” have led to their rapid adoption as a new class of powerful technology.

Smart, connected devices are particularly attractive because they are often less expensive than desktop and laptop computers; have adaptable configurations, including size, weight and shape; and are able to support a variety of customized applications and user interfaces that can be designed for specific tasks. These devices also are often compatible with existing business information systems. These classes of smart, connected devices bring connected computing to very large, rapidly growing markets where desktop and laptop computers might be too expensive or otherwise impractical for general use.

The smart device industry is characterized by a wide variety of hardware configurations and end-user applications, often designed to address a specific vertical market. To accommodate these diverse characteristics in a cost-effective manner, OEMs and ODMs require operating systems that can be integrated with a diverse set of smart devices and support an expanding range of industry-specific functionality, content and applications.

The smart device marketplace is being influenced by the following factors:

2

Table of Contents

Software Solutions for Smart Device Makers

Our customers include world class OEMs and ODMs, enterprises, mobile network operators, SVs and peripheral vendors which are developing smart devices or assisting others in doing so. Representative customer relationships in 2011 included the following:

The software we deliver to our customers as part of our software solutions takes three forms. The first is our own proprietary software products, the second is best-of-class third-party software products and the last is custom software delivered through our engineering services teams. Due to the complexity of embedded software, the integration of our own proprietary software and/or third-party software products on customers’ devices often requires us to provide additional engineering services to accomplish systems integration, customization and/or

3

Table of Contents

optimization as well as quality assurance testing. Our goal is to increase the breadth and depth of our software product and engineering service offerings to smart device customers to enhance our position as an overall smart device software solutions provider.

Proprietary Software Products

Our primary proprietary software offerings include:

Third-Party Software Products

We have license and distribution agreements with multiple third-party software vendors. Our ability to resell these third-party software products, whether stand-alone or in conjunction with our own proprietary software and engineering service offerings, provides our customers with a significant solution source for their smart device project needs. Our primary third-party software offerings include the following:

4

Table of Contents

Software revenue for the last two fiscal years was as follows (in thousands):

The sale of Microsoft operating systems has accounted for substantially all of our third-party software revenue historically, including 93% of third-party software revenue in 2011 and 95% of third-party software revenue in 2010.

Engineering Service Offerings

Our service offerings include:

Customers utilize our engineering services due to our extensive device software development and testing experience and because of our deep experience with embedded and mobile operating systems. We believe that engaging us on a new device design typically results in shorter development cycles and reduced time-to-market, lower overall costs to complete projects, and enhanced product robustness and features, which a customer may have been unable to achieve through other means.

Service revenue for the last two fiscal years was as follows (in thousands):

Revenue recognized for services provided to Ford accounted for 34% ($9.7 million) and 47% ($12.9 million) of total service revenue during 2011 and 2010, respectively.

5

Table of Contents

Strategy

Our strategy is to continue to enhance our position as a leading provider of smart device software solutions and related services, ultimately becoming the go-to solutions provider for our customers and potential customers around the globe. To advance this strategy, we intend to continue to focus on the following areas:

Relationship with Microsoft and Impact on our Smart Device Solutions Business

We have a long-standing relationship with Microsoft and this relationship is critical to the continuing success of our business. Our credentials as a Microsoft partner include:

6

Table of Contents

We work closely with Microsoft executives, developers, product managers and sales personnel. We leverage these relationships in a variety of ways, including:

See Item 1A, “Risk Factors,” for more information regarding our relationship with Microsoft.

Customers

Customers of our software solutions and engineering services include leading OEMs, ODMs, SVs, peripheral vendors, and other enterprises seeking to leverage the software we provide them, be it our own proprietary software, third-party software or custom software developed via our engineering services, to develop high-quality, full-featured smart devices that meet the requirements of numerous end-markets. Representative customers include Ford, Coca-Cola, Qualcomm Inc., Tyco Electronics Ltd., Honeywell International, Inc., Canon, Inc., Microsoft, Motorola Solutions, and Research In Motion Ltd.

Ford accounted for $9.7 million, or 10%, of total revenue in 2011, compared to $12.9 million, or 13%, of total revenue, in 2010. No other customer accounted for 10% or more of total revenue in 2011 or 2010. Revenue generated from Ford has been declining primarily due to completion of the main MyFord Touch project in August 2011, although we have continued to work on the MyFord Touch program since then. In 2012, we will continue to work on the MyFord Touch project under the direction of Microsoft which has become our customer for these services as they have partnered with Ford to be the primary contractor for MyFord Touch programs.

Sales and Marketing

We market our software solutions and engineering services predominantly through our direct sales and sales support organization located primarily in the United States, Taiwan, and the United Kingdom. We also have minor sales and sales support presences in China, Korea, and Japan. The majority of our sales and marketing personnel are located in the United States, but increasingly our expansion of sales and marketing personnel has focused on markets outside North America. Historically, we have not made significant use of resellers, channel partners, representative agents or other indirect channels.

Key elements of our sales and marketing strategy include direct marketing, trade shows, event marketing, public relations, customer and strategic alliance partner co-marketing programs and a comprehensive website. We rely significantly on lead referral and other marketing support programs from strategic partners.

7

Table of Contents

Research and Development

Our research and development personnel are responsible for the design, development and release of our proprietary software products. The majority of our research and development personnel are focused on development of our TestQuest automated testing tools, including TestQuest 10 and HCP. Members of our research and development staff work closely with our sales and marketing departments, as well as with our customers and potential customers, to better understand market needs and requirements. We perform our research and development primarily utilizing engineering staff located in the United States but increasingly have been performing our research and development in locations outside the United States. Research and development expense was $3.8 million and $3.4 million in 2011 and 2010, respectively.

Competition

The market for smart device software and services is extremely competitive. We face competition from the following:

Some of our competitors focus on only one aspect of our business or offer complementary products which can be integrated with our products. As we develop and bring to market new software products and service offerings, particularly offerings focused on specific industries and/or focused on devices utilizing non-Windows Embedded operating systems, we may begin competing with companies with which we have not previously competed. Further, as we expand the geographic markets into which we sell our software solutions and related services, we may expect to increasingly compete with companies with which we have not previously competed. It is also possible that new competitors will enter the market or that our competitors will form alliances, including alliances with Microsoft, that may enable them to rapidly increase their market share. Microsoft has not agreed to any exclusive arrangement with us, nor has it agreed not to compete with us. Microsoft may decide to bring more of the core embedded development services and expertise that we provide in-house, possibly resulting in reduced software and service revenue opportunities for us. The barrier to entering the market as a provider of Windows-based smart device software and services is low. In addition, Microsoft has created marketing programs to encourage systems integrators to work on Windows Embedded and Windows Mobile operating system software and services. These systems integrators are given substantially the same access by Microsoft to the Windows technology as we are. New competitors may have lower overhead than we do and may be able to undercut our pricing. We expect that competition will increase as other established and emerging companies enter the smart device market, and as new products and technologies are introduced.

8

Table of Contents

International Operations

Until recently, our international operations outside of North America consisted principally of operations in Taipei, Taiwan. However, in September 2011 we acquired MPC, a United Kingdom based provider of embedded software engineering services. The acquisition was part of our overall growth strategy and is designed to capitalize on the growing market for smart, connected devices by expanding both the breadth of services offered and the geographies that we serve. Also, during 2011 we established a software development center in Beijing, China and expanded our presence in Taiwan.

We have minor sales and sales support presences in China, Korea, and Japan. We also have a partner in India that provides contract engineering services. Because our OEM Distribution Agreement with Microsoft for the sale of Microsoft Windows Embedded operating systems (e.g. Windows Embedded Compact) has been, until relatively recently, restricted to North America, including Mexico, the majority of our revenue continues to be generated from North America. In 2011, revenue generated from customers located outside of North America was 23% of total revenue, compared to 16% in 2010. The increase in non-North American revenue in 2011 was attributable to the sale of Windows Mobile operating systems, primarily in Asia, as well as the contribution from MPC which was acquired in September 2011.

See Item 1A, “Risk Factors,” and Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” for more information regarding our international operations.

Personnel

The following highlights the total number of employees by area:

As of December 31, 2011, we were also utilizing the services of 41 contractors, primarily for engineering services, compared to 64 at December 31, 2010. Of the total headcount of 356 at December 31, 2011, 200 were located in North America, 65 were located in Taiwan, 51 were located in the United Kingdom, 18 were located in China, 13 were located in India and the remainder located in Japan, Korea, and other countries in Europe. As conditions necessitate, engineering service employees perform research and development activities and vice versa.

Intellectual Property and Other Proprietary Rights

In general, we attempt to protect our intellectual property rights through patent, copyright, trademark and trade secret laws and through contractual arrangements. However, we cannot be certain that our efforts will be effective to prevent the misappropriation of our intellectual property, or to prevent the development and design by others of products or technologies similar to, or competitive with, those developed by us.

Additionally, because a significant portion of our revenue relates to the sale of third-party software products, we also rely on our partners, particularly Microsoft, to appropriately protect their own intellectual property.

We currently have nine issued patents and one pending patent in the United States, and we have a number of registered trademarks in various jurisdictions. We will continue to pursue appropriate protections for our intellectual property.

9

Table of Contents

See Item 1A, “Risk Factors,” for more information regarding our intellectual property and other proprietary rights.

Available Information

We are a reporting company and file annual, quarterly and current reports and other information with the SEC. You may read and copy any materials we file with the SEC at the SEC’s Public Reference Room at 100 F Street, NE, Washington, DC 20549. You also may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains an Internet site that contains reports, proxy and information statements, and other information we file electronically with the SEC at http://www.sec.gov.

Our Internet website is located at www.bsquare.com. We make available, free of charge, through the investor relations section of our website, under “SEC Filings,” all our filings, including our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act, as soon as reasonably practicable after such material is filed with, or furnished to, the SEC.

Directors and Executive Officers of the Registrant

The following table sets forth certain information with respect to our directors and executive officers as of January 31, 2012:

As discussed under Item 1 of Part I, “Business—Forward-Looking Statements,” our actual results could differ materially from those expressed in our forward-looking statements. Factors that might cause or contribute to such differences include, but are not limited to, those discussed below. Additional risks and uncertainties not presently known to us, or that we currently deem immaterial, may also impair our business operations. If any of the following risks occur, our business, financial condition, operating results, cash flows and the trading price of our common stock could be materially adversely affected.

Microsoft-Related Risk Factors

Due to the fact that we have historically provided software and services to customers building devices utilizing Microsoft’s Windows Embedded and Windows Mobile operating systems, as well as the fact that a significant portion of our revenue is derived from the sale of Microsoft Windows Embedded and Windows Mobile operating systems, Microsoft has a significant direct and indirect influence on our business. The following represent several Microsoft-related risk factors which may negatively impact our business and operating results.

10

Table of Contents

If we do not maintain our OEM and Windows Mobile Distribution Agreements with Microsoft or if Microsoft de-emphasizes or divests itself from these areas of its business, our revenue would decrease and our business would be adversely affected.

We have OEM Distribution Agreements (“ODA”s) for Software Products for Embedded Systems with Microsoft, which enable us to sell Microsoft Windows Embedded operating systems to our customers in the United States, Canada, the Caribbean (excluding Cuba), Mexico, the European Union and the European Free Trade Association. These ODAs are effective through June 30, 2012. We have also entered into other ODAs with Microsoft pursuant to which we are licensed to sell Microsoft Windows Mobile operating systems to customers in North America, South America, Central America, Japan, Taiwan, Korea, Europe, the Middle East, and Africa. The ODAs to sell Windows Mobile Operating Systems are effective through June 30, 2012 and July 31, 2012. We generated $58.4 million and $60.6 million of revenue in 2011 and 2010, respectively, through our sales of Microsoft operating systems and expect this revenue stream to continue in 2012. If any of the ODAs are terminated by Microsoft (which Microsoft can do unilaterally) or not renewed, or if Microsoft decides to no longer invest in or to divest itself from these areas of its business, our software revenue and resulting gross profit could decrease significantly and our operating results would be negatively impacted. Future renewals, if any, could be on less favorable terms, which could also negatively impact our business and operating results.

Microsoft can change pricing under the ODAs at any time and recently announced a new pricing change for Windows Embedded operating systems which is currently scheduled to take effect March 1, 2012. Microsoft could change its pricing structure again and, unless we are able to either pass through price increases to our customers or sign our customers to 12-month purchasing commitments, which lowers the price we pay to Microsoft, our revenue, gross profit and operating results would be negatively impacted. Further, Microsoft currently offers a rebate program in conjunction with our ODA activities in which we earn money for achieving certain predefined objectives. If Microsoft were to eliminate or negatively modify the rebate program, our gross profit and operating results would be negatively impacted. We earned rebate credits from Microsoft of $746,000 and $804,000 in 2011 and 2010, respectively.

Microsoft has audited our records under the ODAs in the past and will likely audit our records again in the future and any negative audit results could result in additional charges and/or the termination of the ODAs.

There are provisions in the ODAs that require us to maintain certain internal records and processes for royalty auditing and other reasons. Non-compliance with these and other requirements could result in the termination of the ODAs. Microsoft has concluded an audits of our records pertaining to the ODA in 2009 and 2007, neither of which had material findings. It is possible that future audits could result in charges due to any material findings that are found.

If we do not maintain our favorable relationship with Microsoft, we will have difficulty marketing and selling our software and services and may not receive developer releases of Windows Embedded and Windows Mobile operating systems. As a result, our revenue and operating results could suffer.

We maintain a strategic marketing relationship with Microsoft. If our relationship with Microsoft deteriorates for any reason, including an increased focus by us on customers building devices utilizing non-Microsoft Embedded or Mobile operating systems, our efforts to market and sell our software and services to OEMs and others could be adversely affected and our business could be harmed. Microsoft has significant influence over the development plans and buying decisions of OEMs and others utilizing Windows Embedded and Windows Mobile operating systems for smart devices and these targeted platforms are a significant focus for us. Microsoft provides customer referrals to us. Moreover, Microsoft controls the marketing campaigns related to its operating systems. Microsoft’s marketing activities, including trade shows, direct mail campaigns and print advertising, are important to the continued promotion and market acceptance of Windows Embedded and Windows Mobile operating systems and, consequently, to our sale of Windows-based software and services. We

11

Table of Contents

must maintain a favorable relationship with Microsoft to continue to participate in joint marketing activities with them, which includes participating in “partner pavilions” at trade shows, listing our services on Microsoft’s website, and receiving customer referrals. In the event that we are unable to continue our joint marketing efforts with Microsoft, or fail to receive referrals from them, we would be required to devote significant additional resources and incur additional expenses to market our software products and services directly to potential customers. In addition, we depend on Microsoft for developer releases of new versions of, and upgrades to, Windows Embedded and Windows Mobile software in order to facilitate timely development and delivery of our own software and services. If we are unable to maintain our favorable relationship with Microsoft and no longer continue receiving such new versions and updates, our revenue could decline significantly, and/or our costs could increase significantly, thereby negatively impacting our operating results.

Unexpected delays or announcement of delays by Microsoft related to product releases of Windows Embedded and/or Windows Mobile operating systems could adversely affect our revenue and operating results.

Unexpected delays or announcement of delays in Microsoft’s delivery schedule for new versions of its Windows Embedded and/or Windows Mobile operating systems could cause us to delay our product introductions or impede our ability to sell our products and services and/or to complete customer projects on a timely basis. Such delays, or announcements of delays, by Microsoft could also cause our customers to delay or cancel their project development activities or product introductions, which could negatively impact our revenue and operating results.

If Microsoft adds features to its Windows operating systems or develops products that directly compete with products and services we provide, our revenue and operating results could be negatively impacted.

As the developer of Windows, Windows Embedded Compact, Windows Embedded Standard, Windows Server, Windows Embedded Standard, Windows Embedded Compact, and Windows Mobile operating systems, Microsoft could add features which eliminate or reduce our customers’ need for our software and services, or Microsoft could develop standalone products and services that compete with the products and services we provide to our customers. The ability of our customers, or potential customers, to obtain products and services directly from Microsoft that compete with our products and services could negatively impact our revenue and operating results. Even if the standard features of future Microsoft operating system software were more limited than our offerings, a significant number of our customers, and potential customers, might elect to accept more limited functionality in lieu of purchasing additional software from us or delay the purchase of our products and services while they perform a comparison of Microsoft’s competing offerings. Moreover, the resulting competitive pressures could lead to price reductions for our offerings and reduce our revenue and gross profit accordingly and our operating results could be negatively impacted.

If the markets for Windows Embedded and/or Windows Mobile operating systems fail to develop further, develop more slowly than expected, or decline, our business and operating results may be materially harmed.

Because a significant portion of our revenue to date has been generated by software and services targeted at customers and devices utilizing the Windows Embedded and Windows Mobile operating systems, if the markets for these systems or platforms fail to develop further, or develop more slowly than expected, or decline, our business and operating results could be negatively impacted. Market acceptance of Windows Embedded and Windows Mobile will depend on many factors, including:

12

Table of Contents

MyFord Touch-Related Risk Factors

If we do not obtain additional work on the MyFord Touch program through our new statement of work with Microsoft or elsewhere in the future our future revenue and gross profit would decrease and our operating results would be adversely affected.

We began working on the MyFord Touch infotainment project with Ford in the second quarter of 2008 and have been working on the program since then although the main program was completed in August 2010. Since inception of the program through December 31, 2011, our contractual relationship was with Ford. Effective January 1, 2012, our contractual relationship for the MyFord Touch program shifted from Ford to Microsoft, as Microsoft has become the primary vendor to Ford for this program. Revenue from Ford comprised $9.7 million, or 10%, of our total revenue in 2011. We expect this project work to continue in 2012 under our new statement of work with Microsoft but expect revenue from the MyFord Touch program to be lower, albeit still significant in 2012, than it was in 2011 due to the lower level of personnel resources utilized on the program. Our new statement of work with Microsoft currently runs through June 30, 2012. While expect to be actively involved in future projects with Microsoft and Ford beyond June 20, 2012, if our role on MyFord Touch is scaled back or eliminated beyond that point our revenue and resulting gross profit would suffer and negatively impact our operating results.

If we breach our agreement with Microsoft governing our work for Ford, or fail to comply with the requirements of the agreement, or are required to perform warranty repairs on any of the Ford vehicles into which our work is incorporated, or if any of those vehicles are recalled due to defects in our work, our revenue, operating results and overall business could be negatively impacted.

Our agreement with Microsoft governing our work for Ford on the MyFord Touch program provides customary representations and warranties and we accept liability for certain damages that are incurred as a result of our breach or failure to comply with the requirements of that agreement. These damages may include consequential damages. The agreement also provides that we will indemnify against certain third party claims. In addition, warranty repairs on our work for Ford could require us to devote additional hours that would not be billable. A significant warranty claim could require immediate remediation and consume a large amount of our billable resources until it is fixed, which could negatively impact our revenue, operating results and our business. In addition, if a defect were significant enough to require a vehicle recall, the costs of such a recall could be significant. We have increased our overall insurance amounts, but many claims, including, but not limited to, warranty and recall related issues, may not be covered by insurance.

13

Table of Contents

General Business-Related Risk Factors

Our marketplace is extremely competitive, which may result in price reductions, lower gross profit margins and loss of market share.

The market for our software products and related services is extremely competitive. Increased competition may result in lower revenue, price reductions, lower gross profit and margin and loss of customers and market share, which could negatively impact our operating results. We face competition from:

Some of our competitors focus on only one aspect of our business or offer complementary products which can be integrated with our products. As we develop and bring to market new software products and service offerings, particularly offerings focused on specific industries and/or focused on devices utilizing non-Windows Embedded operating systems, we may begin competing with companies with which we have not previously competed. Further, as we expand the geographic markets into which we sell our software solutions and related services, we may expect to increasingly compete with companies with which we have not previously competed. It is also possible that new competitors will enter the market or that our competitors will form alliances, including alliances with Microsoft, that may enable them to rapidly increase their market share. Microsoft has not agreed to any exclusive arrangement with us, nor has it agreed not to compete with us. Microsoft may decide to bring more of the core embedded development services and expertise that we provide in-house, possibly resulting in reduced software and service revenue opportunities for us. The barrier to entering the market as a provider of Windows-based smart device software and services is low. In addition, Microsoft has created marketing programs to encourage systems integrators to work on Windows Embedded and Windows Mobile operating system software and services. These systems integrators are given substantially the same access by Microsoft to the Windows technology as we are. New competitors may have lower overhead than we do and may be able to undercut our pricing. We expect that competition will increase as other established and emerging companies enter the Windows-based smart device market, and as new products and technologies are introduced.

Our ability to maintain or grow our proprietary software revenue is contingent on our ability to bring to market competitive, unique offerings that keep pace with technological changes and needs. If we are not successful in doing so, our business would be negatively impacted.

Proprietary software product sales provide us with much higher gross profit margins than we typically receive from third-party software products and our engineering service offerings and provide other advantages as well. Increasing the number and amount of proprietary products we sell is an important part of our growth

14

Table of Contents

strategy. Our ability to maintain and increase the revenue contribution from proprietary software products is contingent on our ability to enhance the features and functionality of our current proprietary products as well as to devise, develop and introduce new products. There can be no assurance that we will be able to maintain or expand the number of proprietary products that we sell, and our failure to do so could negatively impact revenue and our operating results.

We may experience delays in our efforts to develop new products and services, and these delays could cause us to miss market opportunities which could negatively impact our revenue and operating results.

The market for our software and services evolves rapidly. As a result, the life cycles of our products and services are difficult to estimate. To be successful, we believe we must continue to enhance our current offerings and provide new software and service offerings with attractive features, prices and terms that appeal to our customers. We have experienced delays in new software and service offering introductions in the past and may do so again in the future. Our revenue and operating results may be negatively impacted if we delay releases of new products, product enhancements and/or new services offerings, or if we fail to accurately anticipate our customers’ needs or technical trends and are unable to introduce new products and service offerings into the market successfully. In addition, our customers may defer or forego purchases of our products and/or services if we, Microsoft, our competitors or major hardware, systems or software vendors introduce or announce new products.

Our future success depends upon our customers’ ability to successfully sell their products incorporating our technology, and to continue buying our services.

Even if a customer selects us to provide software and services, the customer may not ultimately market and sell its product successfully. A cancellation or change in plans by a customer, whether from lack of market acceptance of its products or otherwise, could cause us to lose revenue that we had anticipated and our revenue and operating results would suffer. Also, our revenue and operating results could suffer if a significant customer reduces or delays orders during our sales cycle or chooses not to release products that contain our technology.

If the market for smart devices grows more slowly than we expect, or declines, our revenue may not grow as anticipated, if at all, and our business would be harmed.

The market for smart devices is still in fluctuation and the potential size of this market and the timing of its development are not known. As a result, our profit potential is uncertain and our revenue may not develop as anticipated. We are dependent upon the broad acceptance and adoption by businesses and consumers of a wide variety of smart devices, which will depend on many factors, including:

15

Table of Contents

The success and profitability of our service offerings are contingent on our ability to differentiate these offerings adequately in the marketplace, which is, in turn, contingent on our ability to retain our engineering personnel and defend our billing rate structure against those of our competitors, including those using lower-cost offshore resources. If we are unable to do so successfully, our business could be harmed.

We are a leader in providing engineering services to smart device customers. Our market differentiation is created through several factors, including our experience with a variety of smart device platforms and applications. Our differentiation is contingent, in part, on our ability to attract and retain employees with this expertise, a significant portion of which are currently based in the United States. To the extent we are unable to retain critical engineering services talent and/or our competition is able to deliver the same services by using lower-cost offshore resources, our service revenue and operating results could be negatively impacted.

The success and profitability of our service engagements are contingent upon our ability to scope and bid engagements and deliver our services profitably. If we are unable to do so, our service revenue service gross profit margin and operating results could be negatively impacted.

Various factors may cause the total cost of service projects to exceed the original estimate provided to the customer or the contractual maximum in the case of fixed price contracts, including specification changes, customer deliverable delays, inadequate scoping and inefficient service delivery. If we are unable to adequately scope, bid and deliver on service engagements successfully, our service revenue, service gross margin and operating results could be negatively impacted. In addition, depending on the cause of an overrun for a given customer and project, we may also decide to provide pricing concessions to that customer which could negatively impact our service revenue, service gross profit and operating results.

We periodically enter into engineering service agreements in which we have agreed to perform our engineering service work for lower up-front fees, or for no fees, in exchange for future royalties or per unit fees. There is no guarantee that these arrangements will produce the strategic or economic returns as anticipated.

We have entered into contracts that involve reducing or eliminating up-front engineering service fees in return for a per-device/chip royalty or fee that is earned as our customers ship their devices or chips, and we may enter into more such agreements in the future. Because we are delaying revenue past the point where our services are performed, there is a risk that our customers may cancel their projects or that their devices or chips may not be successful in the market, which could negatively impact our revenue and operating results.

Cooperation and support from silicon vendors is critical for the success of our products and related services that are developed for their particular silicon architecture. Such cooperation cannot be assured.

We have developed, and continue to develop, software and service offerings based on certain silicon architectures (e.g. the TI OMAP architecture). Due to the nature of the industry we serve and the products we develop, it is necessary for us to make certain assumptions regarding which silicon vendors will be successful in the various markets we serve and upon which we are making investments. It is therefore important that there is ongoing support from the SVs in the marketplace for these silicon architectures. For example, during the development of a reference design board, Intel made a strategic decision to sell its PXA Xscale division to Marvell which negatively impacted the sale of our Xscale-based reference designs. There can be no assurance that Marvell, TI, or any of the other SVs will continue to pursue and support the markets that we have been targeting. If the SVs do not support our efforts going forward, our revenue and operating results could be negatively impacted.

16

Table of Contents

The long sales cycle of our products and services makes our revenue susceptible to fluctuations.

Our sales cycle is typically three to nine months because the expense and complexity of the software and service offerings we sell generally require a lengthy customer approval process and may be subject to a number of significant risks over which we have little or no control, including:

In addition, to successfully sell our software and engineering service offerings, we must frequently educate our potential customers about the full benefits of our software and services, which can require significant time. If our sales cycle further lengthens unexpectedly, it could adversely affect the timing of our revenue, which could cause our quarterly results to fluctuate.

Erosion of the financial condition of our customers could adversely affect our business.

Our business could be adversely affected if the financial condition of our customers erodes because such erosion could reduce demand from those customers for our software and engineering services. This could also cause them to terminate their relationships with us, and/or could increase the risk that such customers default on their payment obligations to us. Additionally, while we believe that our allowance for doubtful accounts is adequate, economic trends may cause more companies to default or cease operations, in which case our allowances may not cover actual losses, which could adversely affect our operating results.

We may be subject to product liability claims that could result in significant costs.

Our software license and service agreements with our customers typically contain provisions designed to limit our exposure to potential product liability claims with the notable exception of the portion of the MyFord Touch project contracted with Ford. It is possible, however, that these provisions may be ineffective under the laws of certain jurisdictions or that our customers may not agree to these limitations. Although we have not experienced any product liability claims to date, the sale and support of our products and services may be subject to such claims in the future. There is a risk that any such claims or liabilities may exceed, or fall outside, the scope of our insurance coverage, and we may be unable to retain adequate liability insurance in the future. A product liability claim brought against us, whether successful or not, could negatively impact our business and operating results.

Negative business conditions, changes in useful lives, and other factors may negatively affect the carrying value of the intangible assets and goodwill we have acquired.

In the fourth quarter of 2008, we purchased certain assets of TestQuest including acquired technology and other intangible assets with a total gross carrying value of $1.9 million, and which have a carrying value of $197,000 as of December 31, 2011. In the third quarter of 2011, we acquired MPC Data Limited including certain intangible assets with a carrying value of $1.2 million and goodwill of $3.7 million as of December 31, 2011. Although we expect to generate cash from the intangible assets in the future, and do not foresee any impairment of our goodwill, it is possible that we may be required to reassess the carrying value of these assets in the future if certain negative business conditions occur such as negative results of our business associated with our intangible assets or a low stock price. Any reduction in the carrying value of these intangible assets or goodwill would result in an impairment charge that would negatively impact our operating results. Further, business conditions and other factors may also require us to reassess the useful lives associated with intangible assets.

17

Table of Contents

During the fourth quarter of 2011, we assessed that the net carrying value of the remaining intangible assets associated with acquired technology from TestQuest was impaired due to this technology no longer being used in our product offerings. As such, we recognized an impairment charge of $518,000 as software cost of revenue which negatively impacted our gross profit and operating results.

Past acquisitions have proven difficult to integrate, and recent or future acquisitions, if any, could disrupt our business, dilute shareholder value and negatively affect our operating results.

We have acquired the technologies, assets and/or operations of other companies in the past and may acquire or make investments in companies, products, services and technologies in the future as part of our growth strategy. If we fail to properly evaluate, integrate and execute on our acquisitions and investments, our business and prospects may be seriously harmed. To successfully complete an acquisition, we must properly evaluate the technology, market and management team, accurately forecast the financial impact of the transaction, including accounting charges and transaction expenses, integrate and retain personnel, combine potentially different corporate cultures and effectively integrate products and research and development, sales, marketing and support operations. If we fail to do any of these, we may suffer losses and impair relationships with our employees, customers and strategic partners. Additionally, management may be distracted from day-to-day operations. We also may be unable to maintain uniform standards, controls, procedures and policies, which are especially critical in light of Sarbanes-Oxley and other corporate governance requirements, and significant demands may be placed on our management and our operations, information services and financial, legal and marketing resources. Finally, acquired businesses sometimes result in unexpected liabilities and contingencies, which may involve compliance with foreign laws, payment of taxes, labor negotiations or other unknown costs and expenses, which could be significant.

We may not be able to raise additional capital if required to support our business.

If we need to raise additional operating capital, we may find that our access to equity and debt capital markets is limited or blocked entirely. In the past, our stock has traded at low volumes and overall investor confidence in the stock market could falter. This could make it difficult or impossible to sell additional shares on the public markets. In addition, it may be difficult and costly to obtain debt financing and we may be unable to borrow additional funds at acceptable cost, or at all, should the need arise. If we are unable to raise capital as necessary, it may adversely affect our ability to invest in products or fund operations, which would materially harm our business and negatively affect operating results.

We are dependent on our insurance carriers to cover certain risks and a failure of one or more of our carriers, a tightening of the market that increases our costs or decreases our ability to obtain necessary coverage, or the denial of a claim could negatively impact our business.

We have added significant additional insurance to cover the additional exposure presented by our work for Ford on the MyFord Touch program and other customers. While all of our insurance carriers appeared to be viable as of the date of this Annual Report, if this changes, or we are unable to maintain current coverage through viable insurance carriers at reasonable rates, or we are unable to obtain additional coverage that we deem necessary for our business, or if a carrier denies a claim, we may be unable to meet our financial obligations if claims that would otherwise have been covered by this insurance are made which could negatively impact our financial condition and operating results.

Taxing jurisdictions in the United States are becoming more aggressive with tax legislation and tax collection, particularly states facing significant budget deficits, which could expose us to additional tax liability that we have not been subject to in the past.

We make sales in many jurisdictions across the United States, most of which we do not have nexus in and, therefore, are not subject to sales, franchise, income and other state and local taxes. Particularly in light of state revenue deficits, taxing jurisdictions have become more aggressive in defining nexus, among other things, which

18

Table of Contents

could result in us achieving nexus, or potentially achieving nexus in significantly more tax jurisdictions. If this occurs and unless we are able to pass through this cost to our customers, our tax expense will increase which will negatively affect our results of operations. Further, because state and local tax laws are becoming increasingly complex, our cost to monitor our state and local tax compliance will increase which will negatively affect our results of operations. Additionally, there can be no assurance that we do not currently have unknown tax exposure in a state or local tax jurisdiction because of recent tax law changes which we are unaware of and the resulting liability could be significant and would negatively affect our results of operations.

There may be restrictions on the use of our net operating loss and tax credit carryforwards due to a tax law “ownership change.”

Section 382 of the U.S. Internal Revenue Code restricts the ability of a corporation that undergoes an ownership change to use net operating loss and tax credit carryforwards. At December 31, 2011, we had approximately $59.2 million of federal and state net operating loss carryforwards, and $2.6 million of tax credit carryforwards. Under the applicable tax rules, an ownership change occurs if greater than five percent shareholders of an issuer’s outstanding common stock collectively increase their ownership percentage by more than 50 percentage points over a rolling three-year period. We have performed analyses of possible ownership changes which included consideration of a third-party study, and do not believe that an ownership change (as defined by this Section) has occurred. However, if a tax law ownership change has occurred of which we are not aware, or if a tax law ownership change occurs in the future, we may have to adjust the valuation of our deferred tax assets, and could be at risk of having to pay income taxes notwithstanding the existence of our sizable carryforwards. Further, to the extent that we have utilized our carryforwards from prior years, the existence of a previous tax law ownership change that we did not account for could result in liability for back taxes, interest, and penalties.

Non-compliance with our lease agreement could have a material adverse impact on our financial position.

Under the terms of our corporate headquarters lease signed in February 2004, if we default under the lease, the landlord has the ability to demand cash payments forgiven in 2004. The amount of the forgiven payments for which the landlord has the ability to demand repayment was $640,000 at December 31, 2011, and decreases on a straight-line basis over the length of our ten-year headquarters lease. Any breach of or non-compliance with this lease agreement could negatively impact our business, financial condition and operating results.

Intellectual Property-Related Risk Factors

Our software and service offerings could infringe the intellectual property rights of third parties, which could expose us to additional costs and litigation and could adversely affect our ability to sell our products and services or cause shipment delays or stoppages.

It is difficult to determine whether our software and engineering services infringe third-party intellectual property rights, particularly in a rapidly evolving technological environment in which technologies often overlap and where there may be numerous patent applications pending, many of which are confidential when filed. If we were to discover that one of our software or service offerings, or a product based on one of our reference designs, violated a third-party’s proprietary rights, we may not be able to obtain a license on commercially reasonable terms, or at all, to continue offering that product or service. Similarly, third parties may claim that our current or future software products and services infringe their proprietary rights, regardless of whether such claims have merit. Any such claims could increase our costs and negatively impact our business and operating results. In certain cases, we have been unable to obtain indemnification against claims that third-party technology incorporated into our software products and services infringe the proprietary rights of others. However, any indemnification we do obtain may be limited in scope or amount. Even if we receive broad third-party indemnification, these entities may not have the financial capability to indemnify us in the event of infringement. In addition, in some circumstances we are required to indemnify our customers for claims made against them that are based on our software products or services. There can be no assurance that infringement or invalidity claims

19

Table of Contents

related to the software products and services we provide, or arising from the incorporation by us of third-party technology, and claims for indemnification from our customers resulting from such claims, will not be asserted or prosecuted against us. Some of our competitors have, or are affiliated, with companies with substantially greater resources than we have, and these competitors may be able to sustain the costs of complex intellectual property litigation to a greater degree and for longer periods of time than we could. In addition, we expect that software developers will be increasingly subject to infringement claims as the number of products and competitors in the software industry grows, and as the functionality of products in different industry segments increasingly overlap. Such claims, even if not meritorious, could result in the expenditure of significant financial and managerial resources in addition to potential product redevelopment costs and delays. Furthermore, if we were unsuccessful in resolving a patent or other intellectual property infringement action claim against us, we may be prohibited from developing or commercializing certain of our technologies and products, or delivering services based on the infringing technology, unless we obtain a license from the holder of the patent or other intellectual property rights. There can be no assurance that we would be able to obtain any such license on commercially favorable terms, or at all. If such license is not obtained, we would be required to cease these related business operations, which could negatively impact our business, revenue and operating results.

If we fail to adequately protect our intellectual property rights, competitors may be able to use our technology or trademarks, which could weaken our competitive position, reduce our revenue and increase our costs.

If we fail to adequately protect our intellectual property, our competitive position could be weakened and our revenue and operating results adversely affected. We rely primarily on confidentiality procedures and contractual provisions as well as a combination of patent, copyright, trade secret and trademark laws, to protect our intellectual property. These laws and procedures provide only limited protection. It is possible that another party could obtain patents that block our use of some, or all, of our software and services. If that occurred, we would need to obtain a license from the patent holder or design around those patents. The patent holder may or may not choose to make a license available to us at all, or on acceptable terms. Similarly, it may not be possible to design around a blocking patent. In general, there can be no assurance that our efforts to protect our intellectual property rights through patent, copyright, trade secret and trademark laws will be effective to prevent misappropriation of our technology, or to prevent the development and design by others of products or technologies similar to or competitive with those developed by us.

We frequently license the source code of our software products and the source code results of our services to customers. There can be no assurance that customers with access to our source code will comply with the license terms or that we will discover any violations of the license terms or, in the event of discovery of violations, that we will be able to successfully enforce the license terms and/or recover the economic value lost from such violations. To license some of our software products, we rely in part on “shrinkwrap” and “clickwrap” licenses that are not signed by the end user and, therefore, may be unenforceable under the laws of certain jurisdictions. As with other software, our software products are susceptible to unauthorized copying and uses that may go undetected, and policing such unauthorized use is difficult. A significant portion of our marks include the word “BSQUARE.” Other companies use forms of “BSQUARE” in their marks alone, or in combination with other words, and we cannot prevent all such third-party uses. We license certain trademark rights to third parties. Such licensees may not abide by our compliance and quality control guidelines with respect to such trademark rights. Any of these outcomes could negatively impact our brand, dilute its recognition in the marketplace, or confuse potential customers, all of which could harm our business.

The computer software market is characterized by frequent and substantial intellectual property litigation, which is often complex and expensive, and involves a significant diversion of resources and uncertainty of outcome. Litigation may be necessary in the future to enforce our intellectual property or to defend against a claim of infringement or invalidity. Litigation could result in substantial costs and the diversion of resources and could negatively impact our business and operating results.

20

Table of Contents

Our software or hardware products or the third-party hardware or software integrated with our products or delivered as part of our service offerings may suffer from defects or errors that could impair our ability to sell our products and services.

Software and hardware components as complex as those needed for smart devices frequently contain errors or defects, especially when first introduced or when new versions are released. We have had to delay commercial release of certain versions of our products until problems were corrected and, in some cases, have provided product enhancements to correct errors in released products. Some of our contracts require us to repair or replace products that fail to work. To the extent that we repair or replace products our expenses may increase. In addition, it is possible that by the time defects are fixed, the market opportunity may decline which may result in lost revenue. Moreover, to the extent that we provide increasingly comprehensive products and services, particularly those focused on hardware, and rely on third-party manufacturers and suppliers to manufacture these products, we will be dependent on the ability of third-party manufacturers to correct, identify and prevent manufacturing errors. Errors that are discovered after commercial release could result in loss of revenue or delay in market acceptance, diversion of development resources, damage to our reputation and increased service and warranty costs, all of which could negatively impact our business and operating results.

If we are unable to license key software from third parties, our business could be harmed.

We sometimes integrate third-party software with our proprietary software and engineering service offerings or sell such third-party software offerings on a standalone basis (e.g. Windows Embedded operating systems under our ODA with Microsoft). If our relationships with these third-party software vendors were to deteriorate, or be eliminated in their entirety, we might be unable to obtain licenses on commercially reasonable terms, if at all. In the event that we are unable to obtain these third-party software offerings, we would be required to develop this technology internally, assuming it was economically or technically feasible, or seek similar software offerings from other third parties assuming there were competing offerings in the marketplace, which could delay or limit our ability to introduce enhancements or new products, or to continue to sell existing products and engineering services, thereby negatively impacting our revenue and operating results.

Governance-Related Risk Factors

It might be difficult for a third-party to acquire us even if doing so would be beneficial to our shareholders.

Certain provisions of our articles of incorporation, bylaws and Washington law may discourage, delay or prevent a change in the control of us or a change in our management, even if doing so would be beneficial to our shareholders. Our Board of Directors has the authority under our amended and restated articles of incorporation to issue preferred stock with rights superior to the rights of the holders of common stock. As a result, preferred stock could be issued quickly and easily with terms calculated to delay or prevent a change in control of our company or make removal of our management more difficult. In addition, our Board of Directors is divided into three classes. The directors in each class serve for three-year terms, one class being elected each year by our shareholders. This system of electing and removing directors may discourage a third party from making a tender offer or otherwise attempting to obtain control of our company because it generally makes it more difficult for shareholders to replace a majority of our directors. In addition, Chapter 19 of the Washington Business Corporation Act generally prohibits a “target corporation” from engaging in certain significant business transactions with a defined “acquiring person” for a period of five years after the acquisition, unless the transaction or acquisition of shares is approved by a majority of the members of the target corporation’s Board of Directors prior to the time of acquisition. This provision may have the effect of delaying, deterring or preventing a change in control of our company. The existence of these anti-takeover provisions could limit the price that investors might be willing to pay in the future for shares of our common stock.

21

Table of Contents

International Operations-Related Risk Factors

Our international operations expose us to greater intellectual property, management, collections, regulatory and other risks.

Customers outside of North America generated 23% of our total revenue in 2011 and 16% in 2010. We have expanded rapidly internally during 2011 and 2010 including establishing presences in Korea and China and our MPC acquisition in September 2011 which significantly increased our presence in EMEA. We currently have operations outside of North America in Taiwan, China and the United Kingdom and also have a limited sales and/or support presence in Japan and South Korea. Our international activities and operations, and our current expansion plans expose us to a number of risks, including the following:

These risks could have a material adverse effect on the financial and managerial resources required to operate our foreign offices, as well as on our future international revenue, which could negatively impact our business and operating results.

As we increase the amount of software development conducted in non-U.S. locations, potential delays and quality issues may impact our ability to timely deliver our software and services, potentially impacting our revenue and profitability.

We conduct development activities in non-U.S. locations, primarily India (through a partnership with a local company), China, Taiwan, and the United Kingdom, to take advantage of the high-quality, low-cost software development resources found in those countries. Additionally, we have plans to further increase development activity in our Taiwan and China operations. To date, we have limited experience in managing large scale software development outside the United States. Expanding our international software development inherently increases the complexity of managing these programs and may result in delays in introducing new products to market, or delays in completing service projects for our customers, which in turn may adversely impact the

22

Table of Contents

revenue we recognize from related software products and services and could also adversely impact the profitability of service engagements employing offshore resources, thereby negatively affecting our operating results.

As our customers seek more cost-effective locations to develop and manufacture their smart devices, particularly overseas locations, our ability to continue to sell these customers our software products and services could be limited, which could negatively impact our revenue and operating results.

Due to competitive and other pressures, some of our customers have moved, and others may seek to move, the development and manufacturing of their smart devices to overseas locations, which may limit our ability to sell these customers our software and services. As an example, under our ODA with Microsoft, we are currently only able to sell Microsoft Windows Embedded operating systems primarily in North America, the United Kingdom and Germany. If our customers, or potential customers, move their manufacturing overseas we may be restricted from reselling these customers Microsoft Windows Embedded operating systems, or our other products and services, which could negatively impact our revenue and operating results.

Not Applicable

Our corporate headquarters are located in 43,400 square feet of leased space in a single location in Bellevue, Washington. The underlying lease expires in 2014.

In North America, we also lease office space in San Diego, California; Longmont, Colorado; Boston, Massachusetts; Chanhassen, Minnesota; Akron, Ohio; and Dallas, Texas. We lease office space overseas in Beijing, China, Seoul, Korea, Tokyo, Japan, Taipei, Taiwan, and Trowbridge, United Kingdom. Our facilities have sufficient capacity to support our current operational needs as well as short-term growth plans.

None.

Not Applicable.

23

Table of Contents

PART II

Market Information

Our common stock is traded on the NASDAQ Global Select Market under the symbol “BSQR.” The following table sets forth the high and low closing prices for our common stock for the periods indicated, as reported by the NASDAQ Global Select Market.

Holders

As of January 31, 2012, there were 139 holders of record of our common stock. Because many shares of our common stock are held by brokers and other institutions on behalf of shareholders, we are unable to determine the total number of shareholders represented by these holders of record.

Dividends

We have never paid cash dividends on our common stock. We currently intend to retain any future earnings to fund future development and growth and, therefore, do not anticipate paying any consistent cash dividends in the foreseeable future. Our Board of Directors has, however, periodically considered implementing a share repurchase program and/or a special one-time cash dividend.

Not Applicable

24

Table of Contents

The following Management’s Discussion and Analysis of Financial Condition and Results of Operations should be read in conjunction with our consolidated financial statements and related notes. Some statements and information contained in this Management’s Discussion and Analysis of Financial Condition and Results of Operations are not historical facts but are forward-looking statements. For a discussion of these forward-looking statements, and of important factors that could cause results to differ materially from the forward-looking statements contained in this report, see Item 1 of Part I, “Business—Forward-Looking Statements,” and Item 1A of Part I, “Risk Factors.”

Overview

We provide software solutions and related engineering services to companies that develop smart, connected devices. A smart, connected device is a dedicated purpose computing device that typically has a display, runs an operating system (e.g., Microsoft^® Windows^® Embedded Compact) and may be connected to a network via a wired or wireless connection. Examples of smart devices include set-top boxes, home gateways, point-of-sale terminals, kiosks, voting machines, gaming platforms, tablets, handheld data collection devices, personal media players, smart phones and devices targeted at automotive applications. We focus on smart devices that utilize embedded versions of the Microsoft Windows family of operating systems, specifically Windows Embedded Compact, Windows Embedded Standard and Windows Mobile™ as well as devices running other popular operating systems such as Android, Linux, and QNX.

We have been providing software solutions to the smart device marketplace since our inception. Our customers include world class original equipment manufacturers (“OEMs”), original design manufacturers (“ODMs”) and enterprises, as well as silicon vendors (“SVs”) and peripheral vendors which purchase our software solutions for purposes of facilitating processor and peripheral sales to the aforementioned customer categories. In the case of enterprises, our customers include those which develop, market and distribute smart devices on their own behalf as well as those that purchase devices from OEMs or ODMs and require additional device software or testing. The software solutions we provide are utilized and deployed throughout various phases of our customers’ device life cycle, including design, development, customization, quality assurance and deployment.

Critical Accounting Judgments

Use of Estimates

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States requires us to make estimates and assumptions that affect the amounts reported and disclosed in our financial statements and the accompanying notes. Actual results could differ materially from these estimates. On an ongoing basis, we evaluate our estimates, including those related to the allowance for doubtful accounts, percentage of completion on fixed-price service contracts, fair values of financial instruments, deferred tax asset allowances, useful lives and fair value of intangible assets and property and equipment, fair values of stock-based awards, income tax accruals, fair values of acquired assets and liabilities and the fair value of contingent purchase consideration, among other estimates. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable, the results of which form the basis for making judgments about the carrying value of our assets and liabilities.

Revenue Recognition

We recognize revenue from software and engineering service sales when the following four revenue recognition criteria are met: persuasive evidence of an arrangement exists; delivery has occurred or services have been rendered; the selling price is fixed or determinable; and collectability is reasonably assured. Contracts and customer purchase orders are generally used to determine the existence of an arrangement. Shipping documents

25

Table of Contents

and time records are generally used to verify delivery. We assess whether the selling price is fixed or determinable based on the contract and/or customer purchase order and payment terms associated with the transaction and whether the sales price is subject to refund or adjustment. We assess collectability based primarily on the creditworthiness of the customer as determined by credit checks and analysis, as well as the customer’s payment history. Periodically, we will begin work on engineering service engagements prior to having a signed contract and, in some cases, the contract is signed in a quarter after which service delivery costs are incurred. We do not defer costs associated with such engagements before we have received a signed contract.

We recognize software revenue upon shipment provided that no significant obligations remain on our part, substantive acceptance conditions, if any, have been met and the other revenue recognition criteria have been met. Service revenue from time and materials contracts, and training service agreements, is recognized as services are performed. Fixed-price service agreements, and certain time and materials service agreements with capped fee structures, are accounted for using the percentage-of-completion method. We use the percentage-of-completion method of accounting because we believe it is the most accurate method to recognize revenue based on the nature and scope of these engineering service contracts; we believe it is a better measure of periodic income results than other methods and better matches revenue recognized with the costs incurred. Percentage of completion is measured based primarily on input measures such as hours incurred to date compared to total estimated hours to complete, with consideration given to output measures, such as contract milestones, when applicable. Significant judgment is required when estimating total hours and progress to completion on these arrangements which determines the amount of revenue we recognize as well as whether a loss is recognized if one is expected to be incurred for the remainder of the project. Revisions to hour and cost estimates are incorporated in the period in which the facts that give rise to the revision become known.

We also enter into arrangements in which a customer purchases a combination of software licenses, engineering services and post-contract customer support and/or maintenance (“PCS”). As a result, contract interpretation is sometimes required to determine the appropriate accounting, including how the price should be allocated among the deliverable elements if there are multiple elements. PCS may include rights to upgrades, when and if available, telephone support, updates and enhancements. When vendor specific objective evidence (“VSOE”) of fair value exists for all elements in a multiple element arrangement, revenue is allocated to each element based on the relative fair value of each of the elements. VSOE of fair value is established by the price charged when the same element is sold separately. Accordingly, the judgments involved in assessing the fair values of various elements of an agreement can impact the recognition of revenue in each period. Changes in the allocation of the sales price between deliverables might impact the timing of revenue recognition, but would not change the total revenue recognized on the contract. When elements such as software and engineering services are contained in a single arrangement, or in related arrangements with the same customer, we allocate revenue to each element based on its relative fair value, provided that such element meets the criteria for treatment as a separate unit of accounting. In the absence of fair value for a delivered element, revenue is first allocated to the fair value of the undelivered elements and then allocated to the residual delivered elements. In the absence of fair value for an undelivered element, the arrangement is accounted for as a single unit of accounting, resulting in a delay of revenue recognition for the delivered elements until the undelivered elements are fulfilled.

When engineering services and royalties are contained in a single arrangement, we recognize revenue from engineering services as earned in accordance with the criteria above even though the effective rate per hour may be lower than typical because the customer is contractually obligated to pay royalties on their device shipments. We recognize royalty revenue, classified as software revenue, when the royalty report from the customer is received or when such royalties are contractually guaranteed and the revenue recognition criteria are met, particularly that collectability is reasonably assured.

There are two items involving revenue recognition that require us to make more difficult and subjective judgments: the determination of VSOE of fair value in multiple element arrangements and the estimation of percentage of completion on fixed-price service contracts. Historically, we have entered into very few multiple-element arrangements other than those involving the sale of PCS related to the sale of our TestQuest automated

26

Table of Contents

testing tools. We establish VSOE of fair value for TestQuest PCS based on the price when PCS is sold separately. VSOE of TestQuest PCS has been well established in the past as these products have been sold on a stand-alone basis for a number of years even prior to our acquisition of TestQuest assets in November 2008.

We measure our estimate of completion on fixed-price contracts, which in turn determines the amount of revenue we recognize, based primarily on actual hours incurred to date and our estimate of remaining hours necessary to complete the contract. The process of estimating the remaining hours on a contract involves detailed estimates of remaining hours by the engineers and project managers involved with the project, factoring in such variables as the remaining tasks, the complexity of the tasks, the contracted quality of the software to be provided, the customer’s estimated delivery date, integration of third-party software and quality thereof and other factors. Every fixed-price contract requires various approvals within our company, including our Chief Executive Officer if significant. This approval process takes into consideration a number of factors including the complexity of engineering. Historically, our estimation processes related to fixed-price contracts have been accurate based on the information known at the time of the reporting of our results. However, percentage-of-completion estimates require significant judgment. As of December 31, 2011, we were delivering engineering services under 23 fixed-price service contracts. The percentage of completion calculations on these contracts represents management’s best estimates based on the facts and circumstances as of the filing of this report. If there are changes to the underlying facts and circumstances, revisions to the percentage-of-completion calculations will be recorded in the period the changes are noted. If we were 10% under in our estimates of completion on every fixed-bid contract active on December 31, 2011, our revenue would be over-stated by $322,000 for 2011.

Allowance for Doubtful Accounts

We review our accounts receivable regularly for collectability concerns. In determining the amount of our allowance for doubtful accounts, we make judgments about the creditworthiness of customers based on ongoing credit evaluations.

Intangible Assets and Goodwill

We evaluate our intangible assets for indications of impairment whenever events or changes in circumstances indicate that the carrying value may not be recoverable. Our intangible assets were generated through our past acquisitions of businesses and particular assets from businesses. Our intangible assets have consisted of acquired technology, customer relationships, trade names and trademarks, and non-compete agreements. Factors that could trigger an impairment analysis include significant under-performance relative to historical or projected future operating results, significant changes in the manner of our use of the acquired assets or the strategy for our overall business or significant negative industry or economic trends. If this evaluation indicates that the value of the intangible asset may be impaired, we make an assessment of the recoverability of the net carrying value of the asset over its remaining useful life. If this assessment indicates that the intangible asset is not recoverable, based on the estimated undiscounted future cash flows of the technology over the remaining useful life, we reduce the net carrying value of the related intangible asset to fair value. Any such impairment charge could be significant and could have a material adverse effect on our reported financial results. During the fourth quarter of 2011, we recognized an impairment charge of $518,000 related to technology acquired from TestQuest in 2008.

We evaluate goodwill for impairment annually or more frequently when an event occurs or circumstances change that indicate that the carrying value may not be recoverable. Our annual testing date is December 31. We test goodwill for impairment by first comparing the book value of net assets to the fair value of the reporting units. If the fair value is determined to be less than the book value or qualitative factors indicate that it is more likely than not that goodwill is impaired, a second step is performed to compute the amount of impairment as the difference between the estimated fair value of the reporting unit and the carrying value. We estimate the fair value of the reporting units using discounted cash flows. Forecasts of future cash flow are based on our best

27

Table of Contents

estimate of future net sales, gross margins, and operating expenses. Certain estimates of discounted cash flows involve businesses and geographies with limited financial history and developing revenue models. Changes in these forecasts could significantly change the amount of impairment recorded, if any.

Stock-Based Compensation

Our stock-based compensation expense for stock options is estimated at the grant date based on the stock award’s fair value as calculated by the Black-Scholes-Merton (“BSM”) option-pricing model and is recognized as expense over the requisite service period. The BSM model requires various highly judgmental assumptions including expected volatility and option life. If any of the assumptions used in the BSM model change significantly, stock-based compensation expense may differ materially in the future from that recorded in the current period. Restricted stock units (“RSUs”) and restricted stock awards (“RSAs”) are measured based on the fair market values of the underlying stock on the dates of grant as determined based on the number of shares granted and the quoted price of our common stock on the date of grant. In addition, we are required to estimate the expected forfeiture rate and only recognize expense for those shares expected to vest. We estimate the forfeiture rate based on historical experience. To the extent our actual forfeiture rate is different from our estimates, stock-based compensation expense is adjusted accordingly.

Incentive Compensation

We make certain estimates, judgments and assumptions regarding the likelihood of attainment, and the level thereof, of bonuses payable under our annual incentive compensation programs. We accrue bonuses and recognize the resulting expense when the bonus is judged to be reasonably likely to be earned as of year-end and is estimable. The amount accrued, and expense recognized, is the estimated portion of the bonus earned on a year-to-date basis less any amounts previously accrued. These estimates, judgments and assumptions are made quarterly based on available information and take into consideration our year-to-date actual results and expected results for the remainder of the year. Because we consider estimated future results in assessing the likelihood of attainment, significant judgment is required. If actual results differ materially from our estimates, the amount of bonus expense recorded in a particular quarter could be significantly over or under estimated.

Taxes

As part of the process of preparing our consolidated financial statements, we are required to estimate income taxes in each of the countries and other jurisdictions in which we operate. This process involves estimating our current tax expense together with assessing temporary differences resulting from the differing treatment of items for tax and accounting purposes. These differences result in deferred tax assets and liabilities. Net operating losses and tax credits, to the extent not already utilized to offset taxable income or income taxes, also give rise to deferred tax assets. We must then assess the likelihood that any deferred tax assets will be realized from future taxable income, and, to the extent we believe that recovery is not likely, we must establish a valuation allowance. Significant judgment is required in determining our provision for income taxes, deferred tax assets and liabilities and any valuation allowance recorded against our deferred tax assets.

Beginning in 2002 and through the third quarter of 2010, we maintained a full valuation allowance against our deferred tax assets. In the fourth quarter of 2010, we determined that it was more likely than not that we would generate sufficient future taxable income to realize a portion of our net operating loss carryforwards, and recorded a portion of our deferred tax assets related to such estimated future taxable income. We estimate the valuation allowance related to our deferred tax assets on a quarterly basis.

Our sales may be subject to other taxes, particularly withholding taxes, due to our sales to customers in countries other than the United States. The tax regulations governing withholding taxes are complex, causing us to have to make assumptions about the appropriate tax treatment. Further, we make sales in many jurisdictions across the United States, where tax regulations are increasingly becoming more aggressive and complex. We must therefore continue to analyze our state tax exposure and determine what the appropriate tax treatments are, and make estimates for sales, franchise, income and other state taxes.

28

Table of Contents

Results of Operations

The following table presents certain financial data as a percentage of total revenue for the periods indicated. Our historical operating results are not necessarily indicative of the results for any future period.

Comparison of the Years Ended December 31, 2011 and 2010

Acquisition of MPC Data Limited

On September 11, 2011 we completed the acquisition of MPC Data Limited (“MPC”), a United Kingdom-based provider of embedded software engineering services. The acquisition is part of our overall growth strategy and is designed to capitalize on the growing market for smart, connected devices by expanding both the breadth of services offered and the geographies that we serve. As the acquisition took place late in the third quarter of 2011, the impact on our results of operations was relatively insignificant for the year in total. Where applicable, the MPC-related impacts have been noted in the following commentary.

Revenue

Our revenue is generated from the sale of software, both our own proprietary software and third-party software that we resell, and the sale of engineering services. Total revenue was $96.8 million in both 2011 and 2010. A $2.2 million decline in sales of Microsoft operating systems in 2011 was offset by increases in our sale of Adobe Flash products, engineering services revenue, and proprietary software revenue.

Our revenue mix has been shifting to customers located outside of North America as we have expanded our sales and development presence in locales outside North America. Before 2011, our operations outside of North America consisted principally of operations in Taiwan, as well as relatively minor sales and/or support presences in China, India, Japan, Korea, and the United Kingdom. During 2011 we expanded our sales teams across Asia, our development presence in China and acquired the operations of MPC in the United Kingdom. Revenue from

29

Table of Contents

our customers outside of North America increased $6.2 million, or 39%, to $22.1 million in 2011, from $15.9 million in 2010. Revenue from our customers outside of North America represented 23% of our total revenue in 2011, compared to 16% in 2010. This international growth was related primarily to the $5.8 million sales growth of Microsoft Windows Mobile operating systems in the Asia Pacific (“APAC”) region from 2010 to 2011, as well $1.4 million of engineering services revenue derived from MPC, and a $900,000 increase in engineering services revenue in the APAC region as well.

Software revenue

Software revenue consists of sales of third-party software and revenue realized from our own proprietary software products, which include software license sales, royalties from our software products, sales of software development kits, support and maintenance revenue, and royalties from certain engineering service contracts. Software revenue for 2011 and 2010 was as follows (dollars in thousands):

The vast majority of our third-party software revenue is comprised of sales of Microsoft Windows Embedded operating systems and Microsoft Windows Mobile operating systems. Third-party software sales decreased $1.2 million, or 2%, in 2011 as compared to the prior year. This decrease was primarily due to a $6.4 million decline in sales of Windows Embedded operating systems, the result of losing one major customer and lower purchasing volumes from several other large customers who worked through excess inventory levels during 2011. These declines were offset in part by a $4.2 million increase in sales of Windows Mobile operating systems, with much of this increase related to higher purchasing volumes from two major device manufacturers in Korea.

Proprietary software revenue increased $434,000, or 8%, in 2011 compared to 2010 due primarily to higher sales of Qualcomm Mobile Development Kits and increased revenue from our Texas Instruments OMAP software products. These increases were offset in part by lower TestQuest licensing revenue which was the result of two TestQuest sales which significantly benefited the fourth quarter of 2010 in the amount of $723,000.

Service revenue

Service revenue for 2011 and 2010 was as follows (dollars in thousands):

Ford Motor Company (“Ford”) continued to be our largest engineering services customer in 2011, representing 34% of service revenue, compared to 47% of service revenue in 2010. Ford contributed $9.7 million

30

Table of Contents

in service revenue in 2011 compared to $12.9 million in 2010. Since 2008, Ford has engaged us to assist in the development of their next generation infotainment offering called MyFord Touch. The MyFord Touch infotainment system is an in-car communications and entertainment system which enables drivers of Ford’s car offerings to access a wide range of connected information and entertainment experiences including music and multi-media services, hands-free telephony, Internet-enabled applications, language services, news and navigation. Our initial project with Ford was completed in the third quarter of 2010 where we provided them hardware design and implementation, platform level software development, application level software development, quality assurance services and systems integration services for the MyFord Touch. Since we completed the initial project, we are now primarily focused on developing and integrating new user applications for the MyFord Touch, enhancing existing applications and customizing the MyFord Touch platform for additional vehicle models. In 2012, we will continue to work on the MyFord Touch project; however, rather than work directly for Ford, we have been engaged by Microsoft who is the primary provider of services for the MyFord Touch programs.

Ford contributed $9.7 million in service revenue in 2011, a decline of $3.2 million from 2010. The number of engineers working on the MyFord Touch declined since initial project completion in the third quarter of 2010 as we are no longer in the development stage of the MyFord Touch platform.

Total service revenue increased $818,000, or 3%, in 2011 compared to 2010 due to growth inside and outside of North America from non-Ford customers.

North American service revenue declined $1.4 million, or 6%, to $23.6 million in 2011, primarily due to the $3.2 million decline related to Ford offset in part by revenue increases related to other customers.

Service revenue in Europe, the Middle East, and Africa (the “EMEA” region) increased by $1.3 million, to $1.7 million in 2011, primarily driven by MPC which contributed $1.4 million to EMEA revenue in 2011 since its acquisition in September 2011.

Service revenue from the APAC region increased $880,000, or 37%, to $3.3 million in 2011 from $2.4 million in 2010, primarily related to a new customer in Japan as well as contributions from China and Korea resulting from our sales expansion in those areas.

Gross profit and gross margin

Cost of revenue related to software revenue consists primarily of the cost of third-party software products payable to third-party vendors. Cost of revenue related to service revenue consists primarily of salaries and benefits, contractor costs and re-billable expenses, related facilities and depreciation costs, and amortization of certain intangible assets related to acquisitions. Gross profit on the sale of third-party software products was also positively affected by rebate credits of $746,000 in 2011 and $804,000 in 2010 from Microsoft which we earned through the achievement of defined objectives.

The following table outlines software, services and total gross profit (dollars in thousands):

31

Table of Contents

Software gross profit and gross margin

Software gross profit decreased by $652,000, or 5%, in 2011, compared to 2010, while software gross margin decreased by one percentage point to 19%. This decline was primarily due to a $518,000 impairment charge related to the acquired technology from TestQuest in 2008 which we recognized in the fourth quarter of 2011 as software cost of revenue. The intangible assets associated with the acquired technology were deemed to be impaired as this technology is no longer used in any of our product offerings. During the fourth quarter of 2011, we completed development of TQ10, the next generation of our automated testing software. TQ10 replaces both of our legacy TestQuest products, Countdown and TQ Pro, in what we will offer to our customers and provide technical support for in the future. Although TQ10 is similar in concept to Countdown and TQ Pro, TQ10 was developed on a new code base and architecture. As no significant future cash flows are expected to be generated from these legacy technologies, we deemed the intangible assets associated with them to be impaired. Without the impairment charge, software gross margin would have been consistent with the 20% gross margin in the prior year.

Service gross profit and gross margin

Service gross profit decreased by $418,000, or 6%, in 2011 as compared to 2010, while service gross margin decreased by two percentage points to 22% in 2011, from 24% in 2010. The decline in service gross margin was primarily the result of higher engineering headcount in the current year largely resulting from our international expansion which resulted in a 10% increase in available hours and increased our cost of sales by $1.2 million compared to 2010. However, our actual billable hours only increased 2% year-over-year as our utilization fell by eight percentage points in 2011 compared to 2010, most of which resulted from start-up time associated with new personnel and new development centers. This decline in service margin was partially offset by a 4% increase in our realized rate per hour in 2011 compared to 2010.

Operating expenses

Selling, general and administrative

Selling, general and administrative expenses consist primarily of salaries and related benefits, commissions and bonuses for our sales, marketing and administrative personnel and related facilities and depreciation costs, as well as professional services fees (e.g., consulting, legal and audit). Selling, general and administrative expenses increased $3.8 million, or 30%, to $16.7 million in 2011, from $12.9 million in 2010. Selling, general and administrative expenses represented 17% of our total revenue in 2011 compared to 13% of revenue in 2010. The increase was due in part to $934,000 higher stock compensation expense in the current year, as well as a $1.8 million increase in sales and marketing expenses, which was driven by growth in our sales capacity in Asia and Europe, as well as our corporate rebranding in the current year. General and administrative expenses were also higher in the current year as we added headcount to support our international growth. The current period was also negatively affected by higher employee fringe rates as health insurance premiums increased during the year, and $193,000 in transaction-related expenses associated with the MPC acquisition.

Research and development

Research and development expenses consist primarily of salaries and benefits for software development and quality assurance personnel, contractor and consultant costs and related facilities and depreciation costs. Research and development expenses increased $454,000, or 13%, to $3.8 million in 2011, from $3.4 million in 2010. This increase was driven primarily by higher costs associated with the development and roll-out of our HCP and TestQuest 10 products in 2011. Research and development expenses represented 4% of our total revenue in both 2011 and 2010.

Other income (expense), net

Other income (expense), net consists of gains and losses we may recognize on our investments, gains or losses on foreign exchange transactions, interest income on our cash, cash equivalents and investments and other

32

Table of Contents

items. Other income was $422,000 in 2011 compared to other expense of $504,000 in 2010, representing an increase of $926,000 of income. This increase was primarily due to a $104,000 realized gain on the sale of an auction rate security (“ARS”) investment in 2011, compared to an other-than-temporary impairment loss of $580,000 realized on our ARS investments in 2010. Additionally, we settled a lawsuit with our former broker dealer of ARS investments for $213,000 in January 2012. As the events that gave rise to the settlement took place before December 31, 2011, we recognized this settlement as other income in 2011.

Income tax benefit

Income tax benefit decreased by $2.2 million to $166,000 in 2011, from $2.4 million in 2010. This decrease was due primarily to a $2.6 million tax benefit recognized in 2010 when we reevaluated the net carrying value of our deferred tax assets. Our income tax benefit in 2011 was primarily attributable to our reevaluation of the net carrying value of our deferred tax assets generated from our international operations since we now believe some portion will be realized through future income in those regions. Deferred tax assets and their associated valuation allowances are evaluated quarterly and may change in the future based upon our estimate of the probability of future taxable income. Reductions in our valuation allowance will have a positive effect on our income tax provision while increases in our valuation allowance will have a negative effect.

Liquidity and Capital Resources

As of December 31, 2011, we had $19.0 million of cash, cash equivalents, short-term and long-term investments and restricted cash, compared to $23.1 million at December 31, 2010. This $4.1 million decline was primarily the result of our MPC acquisition which utilized $4.8 million of cash, net of cash acquired.

Restricted cash is classified as long term and was $875,000 at both December 31, 2011 and 2010. This cash is restricted under the terms of our headquarters operating lease which will continue to secure that obligation through its expiration in 2014. Our working capital was $18.0 million at December 31, 2011, compared to $20.0 million at December 31, 2010.

Cash and cash equivalents were $8.5 million at December 31, 2011, a decrease of $2.3 million from $10.8 million at December 31, 2010.

Net cash provided by operating activities was $1.1 million in 2011, primarily due to $3.1 million of non-cash expenses, a $1.8 million decrease in our accounts receivable, and a $518,000 impairment charge on our intangible assets associated with TestQuest acquired technology. These cash increases were offset in part by a $2.7 million decline in our third-party software fees payable during the year. Net cash provided by operating activities was $5.3 million in 2010, primarily attributable to $6.2 million in net income and $2.2 million in non-cash expenses, offset in part by a negative change in various working capital line items.

Net cash used by investing activities was $3.6 million in 2011 primarily due to the acquisition of MPC for $4.8 million in cash, net of cash acquired. Additionally, we purchased $785,000 of equipment during the year. These uses of cash for investing activities were offset in part by net maturities of marketable securities during the year. Net cash used by investing activities was $7.7 million in 2010 primarily due to $19.5 million of purchases of short-term investments offset in part by $8.2 million in proceeds from the maturity of short-term investments and $3.8 million in sales of our ARS.

Financing activities generated cash of $424,000 in 2011 and $383,000 in 2010 as a result of employees’ exercise of stock options.

We believe that our existing cash, cash equivalents, short-term investments and long-term investments will be sufficient to meet our needs for working capital and capital expenditures for at least the next 12 months.

33

Table of Contents

Cash Commitments

We have the following future or potential cash commitments:

Not Applicable

34

Table of Contents

BSQUARE CORPORATION

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

35

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Shareholders

BSQUARE Corporation

We have audited the accompanying consolidated balance sheets of BSQUARE Corporation (the “Corporation”) as of December 31, 2011 and 2010 and the related consolidated statements of operations, shareholders’ equity and cash flows for the years then ended. These consolidated financial statements are the responsibility of the Corporation’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. The Corporation is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Corporation’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall consolidated financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of BSQUARE Corporation as of December 31, 2011 and 2010, and the consolidated results of its operations and its cash flows for the years then ended in conformity with accounting principles generally accepted in the United States of America.

/s/ Moss Adams LLP

Seattle, Washington

February 23, 2012

36

Table of Contents

BSQUARE CORPORATION

CONSOLIDATED BALANCE SHEETS

(In thousands, except share and per share amounts)

See notes to consolidated financial statements.

37

Table of Contents

BSQUARE CORPORATION

CONSOLIDATED STATEMENTS OF OPERATIONS

(In thousands, except per share amounts)

See notes to consolidated financial statements.

38

Table of Contents

BSQUARE CORPORATION

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

(In thousands, except share and per share amounts)

See notes to consolidated financial statements.

39

Table of Contents

BSQUARE CORPORATION

CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)