Byrna Technologies Inc. - Quarter Report: 2015 August (Form 10-Q)

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM 10-Q

(Mark One)

[X] QUARTERLY REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended August 31, 2015

[  ] TRANSITION REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from _______ to _______

Commission File Number: 333-132456

SECURITY DEVICES INTERNATIONAL, INC.
(Exact Name of Registrant as Specified in its Charter)

4830 West Kennedy Blvd., suite 600, Tampa
Florida, 33609
(Address of Principal Executive Offices) (Zip Code)

Registrant's telephone number including area code: (905) 582-6402

N/A
Former name, former address, and former fiscal year, if changed since last report

Indicate by check mark whether the registrant (1) filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the past 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
Yes [X]     No [  ]

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).
Yes [X]     No [  ]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).
Yes [  ]     No [X]

As of September 30, 2015, the Company had 54,615,642 issued and outstanding shares of common stock.

SECURITY DEVICES INTERNATIONAL, INC.

INTERIM CONSOLIDATED FINANCIAL STATEMENTS

AUGUST 31, 2015

(Amounts expressed in US Dollars)

(Unaudited)

SECURITY DEVICES INTERNATIONAL, INC.
INTERIM FINANCIAL STATEMENTS

AUGUST 31, 2015

(Amounts expressed in US Dollars)
(Unaudited)

TABLE OF CONTENTS

SECURITY DEVICES INTERNATIONAL, INC.
Interim Consolidated Balance Sheets
As at August 31, 2015 and November 30, 2014
(Amounts expressed in US Dollars)

See condensed notes to the interim consolidated financial statements.

1

SECURITY DEVICES INTERNATIONAL, INC.
Interim Consolidated Statements of Operations and Comprehensive loss
For the Nine months and Three Months Ended August 31, 2015 and August 31, 2014
(Amounts expressed in US Dollars)
(Unaudited)

See condensed notes to the interim consolidated financial statements.

2

See condensed notes to the interim consolidated financial statements.

3

See condensed notes to the interim consolidated financial statements.

4

SECURITY DEVICES INTERNATIONAL, INC.
Notes to Interim Consolidated Financial Statements
August 31, 2015
(Amounts expressed in US Dollars)
(Unaudited)

The accompanying unaudited interim consolidated financial statements have been prepared in accordance with the instructions to Form 10-Q and therefore do not include all information and footnotes necessary for a fair presentation of financial position, results of operations and cash flows in conformity with accounting principles generally accepted in the United States of America (GAAP); however, such information reflects all adjustments (consisting solely of normal recurring adjustments), which are, in the opinion of management, necessary for a fair presentation of the results for the interim periods.

The unaudited interim consolidated financial statements should be read in conjunction with the financial statements and notes thereto together with management’s discussion and analysis of financial condition and results of operations contained in Security Devices International Inc.’s (“SDI” or the “Company”) annual report on Form 10-K for the year ended November 30, 2014. In the opinion of management, the accompanying unaudited interim consolidated financial statements reflect all adjustments of a normal recurring nature considered necessary to fairly state the financial position of the Company at August 31, 2015 and November 30, 2014, the results of its operations for the nine and three-month periods ended August 31, 2015 and May 31, 2014, and its cash flows for the nine-month periods ended August 31, 2015 and May 31, 2014. In addition, some of the Company’s statements in this quarterly report on Form 10-Q may be considered forward-looking and involve risks and uncertainties that could significantly impact expected results. The results of operations for the nine-month period ended August 31, 2015 are not necessarily indicative of results to be expected for the full year.

The Company was incorporated under the laws of the state of Delaware on March 1, 2005. On February 3, 2014 the Company incorporated a wholly owned subsidiary in Canada “Security Devices International Canada Corp”. The interim unaudited consolidated financial statements for the period ended August 31, 2015 include the accounts of Security Devices International, Inc. (the “Company” or “SDI”), and its subsidiary Security Devices International Canada Corp. All material inter-company accounts and transactions have been eliminated.

The Company is a less-lethal defense technology company, specializing in the innovative next generation solutions for security situations that do not require the use of lethal force. SDI has implemented manufacturing partnerships to assist in the deployment of their patented and patent pending family of products. These products consist of the current manufacture of Blunt Impact Projectile 40mm (BIP) line of products, and the future Wireless Electric Projectile 40mm (WEP).

These unaudited interim consolidated financial statements have been prepared in accordance with generally accepted accounting principles applicable to a going concern, which assumes that the Company will be able to meet its obligations and continue its operations for its next fiscal year.

The Company has incurred a cumulative loss of $25,467,782 from inception to August 31, 2015 which includes a non-cash stock based compensation expense of $7,237,381 for issue of options and warrants. The Company has funded operations through the issuance of capital stock and convertible debentures. The Company has started to generate revenue from operations. However, it still expects to incur significant expenses before becoming profitable. The Company’s future success is dependent upon its ability to raise sufficient capital or generate adequate revenue, to cover its ongoing operating expenses, and also to continue to develop and be able to profitably market its products. These factors raise substantial doubt about its ability to continue as a going concern. The financial statements do not include any adjustments that might result from the outcome of this uncertainty.

5

SECURITY DEVICES INTERNATIONAL, INC.
Notes to Interim Consolidated Financial Statements
August 31, 2015
(Amounts expressed in US Dollars)
(Unaudited)

In addition to raising funds in the prior years, the Company raised $160,000 through the issuance of 800,000 common shares during the year ended November 30, 2011. The Company further raised an additional $878,328 by issue of Convertible Debentures during the year ended November 30, 2011 and $910,000 during the year ended November 30, 2012. In addition, the Company raised $649,750 by issuance of 2,165,834 common shares during the year ended November 30, 2012. On August 15, 2013, the Company filed an amended and restated final prospectus (the “Prospectus”) in Canada, in the provinces of Alberta, British Columbia and Ontario for listing its shares in these provinces in Canada. On August 27, 2013 the Company completed an initial public offering to raise gross proceeds of CAD $3,993,980 (US $3,794,280) through the issuance of 9,984,950 Common Shares at a price of CAD $0.40 (US $0.38) per Common Share (the “Issue Price”). During the year ended November 30, 2014, the Company issued $1,398,592 (CAD $1,549,000) face value 12% convertible debentures with a term to August 6, 2017 (the “Maturity Date”) and raised net $1,241,299. In addition, during the nine-month period ended August 31, 2015, the Company raised $2,500,000 through the issuance of 7,575,757 common shares and also issued 105,600 common shares on exercise of warrants for $16,775 and 35,000 common shares on exercise of options for $6,995. The Company’s common shares commenced trading on the TSX Venture Exchange (“TSX”) under the symbol “SDZ”.

6

SECURITY DEVICES INTERNATIONAL, INC.
Notes to Interim Consolidated Financial Statements
August 31, 2015
(Amounts expressed in US Dollars)
(Unaudited)

Equipment is recorded at cost less accumulated depreciation. Depreciation is provided commencing in the month following acquisition using the following annual rate and method:

7

SECURITY DEVICES INTERNATIONAL, INC.
Notes to Interim Consolidated Financial Statements
August 31, 2015
(Amounts expressed in US Dollars)
(Unaudited)

Year ended November 30, 2014

On July 17, 2014, the Company issued 50,000 shares on exercise of options at $0.25 per share.

Nine- months ended August 31, 2015

8

SECURITY DEVICES INTERNATIONAL, INC.
Notes to Interim Consolidated Financial Statements
August 31, 2015
(Amounts expressed in US Dollars)
(Unaudited)

Effective October 30, 2006 the Company adopted the following stock option and stock bonus plans which were replaced by the Incentive Stock Option Plan (the “2013 Plan”) that was issued in May, 2013.

Incentive Stock Option Plan. The Company’s Incentive Stock Option Plan authorizes the issuance of shares of its Common Stock to persons that exercise options granted pursuant to the Plan. Only employees may be granted options pursuant to the Incentive Stock Option Plan. The option exercise price is determined by its directors but cannot be less than the market price of its common stock on the date the option is granted. The Company has reserved 1,000,000 common shares under this plan. No options have been issued under this plan as at August 31, 2015.

Non-Qualified Stock Option Plan. SDI’s Non-Qualified Stock Option Plan authorizes the issuance of shares of its Common Stock to persons that exercise options granted pursuant to the Plans. SDI’s employees, directors, officers, consultants and advisors are eligible to be granted options pursuant to the Plans, provided however that bona fide services must be rendered by such consultants or advisors and such services must not be in connection with the offer or sale of securities in a capital-raising transaction. By a resolution of the Board of Directors, the Company amended this plan to increase the number of common shares available under this plan from 2,250,000 to 4,500,000 effective October 10, 2007. The Company further amended its Non-Qualified Stock Option Plan to increase the number of Common Shares available under this plan to 5,000,000 and filed an S-8 registration statement on April 10, 2008.

Stock Bonus Plan. SDI’s Stock Bonus Plan allows for the issuance of shares of common stock to its employees, directors, officers, consultants and advisors. However bona fide services must be rendered by the consultants or advisors and such services must not be in connection with the offer or sale of securities in a capital-raising transaction. The Company has reserved 150,000 common shares under this plan. No options have been issued under this plan as at August 31, 2015.

Effective May 31, 2013, the Company adopted an incentive stock option plan (the “2013 Plan”), which replaces the stock option and stock bonus plans that were in place prior to adoption of the 2013 Plan. All outstanding options to purchase Common Shares granted by the Company under the prior plans are now governed by the 2013 Plan and the prior plans (an Incentive Stock Option Plan, a Non-Qualified Stock Option Plan, and a Stock Bonus Plan) have been terminated.

Year ended November 30, 2014

On March 19, 2014, the board of directors granted options to five consultants to acquire a total of 400,000 common shares. The 400,000 options were issued at an exercise price of $0.31 (CAD$0.35) per share and vest immediately with an expiry term of three years. The fair value of each option used for the purpose of estimating the stock compensation is calculated using the Black-Scholes option pricing model with the following weighted average assumptions:

9

SECURITY DEVICES INTERNATIONAL, INC.
Notes to Interim Consolidated Financial Statements
August 31, 2015
(Amounts expressed in US Dollars)
(Unaudited)

On May 9, 2014, the board of directors granted options to one director to acquire a total of 600,000 common shares. These options were issued at an exercise price of $0.32 (CAD $0.35) per share and vest immediately with an expiry term of five years. The fair value of each option used for the purpose of estimating the stock compensation is calculated using the Black-Scholes option pricing model with the following weighted average assumptions:

On July 25, 2014, the board of directors granted options to two consultants to acquire a total of 150,000 common shares. These options were issued at an exercise price of $0.32 (CAD $0.35) per share and vest immediately with an expiry date of August 5, 2017. The fair value of each option used for the purpose of estimating the stock compensation is calculated using the Black-Scholes option pricing model with the following weighted average assumptions:

On September 11, 2014, the board of directors granted options to directors and consultants to acquire a total of 1,875,000 common shares. These options were issued at an exercise price of $0.36 (CAD $0.40) per share and vest immediately with an expiry date of September 10, 2019. The fair value of each option used for the purpose of estimating the stock compensation is calculated using the Black-Scholes option pricing model with the following weighted average assumptions:

As of November 30, 2014 there was $Nil of unrecognized expense related to non-vested stock-based compensation arrangements granted. a

Nine- month period ended August 31, 2015

The Company did not issue any options during the nine- month period ended August 31, 2015.

As of August 31, 2015 there was $Nil of unrecognized expense related to non-vested stock-based compensation arrangements granted.

10

SECURITY DEVICES INTERNATIONAL, INC.
Notes to Interim Consolidated Financial Statements
August 31, 2015
(Amounts expressed in US Dollars)
(Unaudited)

Year ended November 30, 2014

On August 6, 2014, the Company issued $1,398,592 (CAD $1,549,000) face value 12% convertible debentures with a term to August 6, 2017 (the “Maturity Date”). At any time while the debentures are outstanding, the holder has the option to convert the outstanding principal of the debentures into common shares of the Company at a fixed conversion price of CAD $0.50 per share. In connection with the financing, the Company issued warrants to placement agents to purchase 151,900 shares of common stock at an exercise price of US $0.45 (CAD $0.50) per share. These warrants expire on August 5, 2016. The relative fair value allocated to warrants and credited to additional paid in capital was $33,583.

Nine month period ended August 31, 2015

The Company did not issue any warrants during the nine month period ended August 31, 2015.

The following transactions are in the normal course of operations and are measured at the exchange amount, which is the amount of consideration established and agreed to by the related parties.

Nine months ended August 31, 2015

Two non-independent directors were compensated as per their consulting agreements with the Company. The Company expensed a total of $158,900 as management fees to these two directors, in their role as officers in accordance with their consulting contracts and expensed a total of $3,900 as automobile allowance.

The Company expensed $19,000 for services provided by the CFO of the Company and $166,500 for services provided by a corporation in which the Chief Operating Officer has an interest, in accordance with the consulting contract.

The Company reimbursed $65,700 to directors and officers for travel and entertainment expenses incurred for the Company.

11

SECURITY DEVICES INTERNATIONAL, INC.
Notes to Interim Consolidated Financial Statements
August 31, 2015
(Amounts expressed in US Dollars)
(Unaudited)

Nine months ended August 31, 2014

The directors were compensated as per their consulting agreements with the Company. The Company expensed a total of $186,597 as management fees to its two directors and expensed a total of $5,400 as automobile allowance.

The Company expensed $20,840 for services provided by the CFO of the Company and $169,968 for services provided by a corporation in which the Chief Operating Officer has an interest.

The Company reimbursed $83,543 to directors and officers for travel and entertainment expenses incurred for the Company.

On May 9, 2014, the board of directors granted options to one director to acquire a total of 600,000 common shares. These options were issued at an exercise price of $0.32 (CAD $0.35) per share and vest immediately with an expiry term of five years. The fair value of each option used for the purpose of estimating the stock compensation is calculated using the Black- Scholes option pricing model. The Company expensed $140,573 as compensation expense.

COMMITMENTS

a) Consulting agreements:

The non-independent directors of the Company executed consulting agreements with the company on the following terms:

Effective January 1, 2013, SDI executed a two- year agreement with a company in which a director, Allen Ezer, has an interest. The agreement was extended for a period of two years ending December 31, 2016 at a monthly remuneration of CAD $8,925. Either party may terminate the consulting agreement by giving 90 days written notice. In the event of termination without cause due to change in control brought out by sale, lease, merger or transfer, the Company is obligated to pay severance of 12 months fees at current rate at time of change in control. Effective February 1, 2015, the Company and director agreed to reduce the monthly remuneration by 10% to CAD 8,032. This reduction continued until the completion of the next round of financing, which was completed in May 2015.

Agreement with the Chief Executive Officer Greg Sullivan to pay compensation of CAD$12,000 per month, with an annual 5% increase and a car allowance of CAD$600 per month. The agreement expires on December 31, 2016. In the event of termination without cause, the Company is obligated to pay two times the then annual compensation and by continuing the then benefits coverage for a period of 2 years. The annual remuneration will increase with accomplishment of milestones. The agreement may be terminated with mutual consent or by the Chief Executive Officer giving three weeks’ notice. Effective February 1, 2015, the Company and director agreed to reduce the monthly remuneration by 10% to CAD 12,502. This reduction continued until the completion of the next round of financing, which was completed in May 2015.

Effective October 1, 2014, SDI executed a renewal agreement with a company in which the Chief Operating Officer Dean Thrasher has an interest in, for a period which expires on December 31, 2017 for services rendered. The total consulting fees are estimated at CAD$864,000 for the three-year period. In the event of termination without cause due to change in control brought out by sale, lease, merger or transfer, the Company is obligated to pay severance of 18 months’ fees at current rate at time of change in control. SDI paid cash and expensed $230,892 during the year ended November 30, 2014. The company may also accept common shares in lieu of cash. As of November 30, 2014, the company has not exercised its right to accept this compensation in shares. Effective February 1, 2015, the Company and director agreed to reduce the monthly remuneration by 10% to CAD $21,600. This reduction continued until the completion of the next round of financing, which was completed in May 2015.

Effective November 1, 2013, SDI executed an agreement with a non-related consultant to pay compensation of $3,800 (CAD $5,000) per month. The consultant has agreed to provide corporate market advisory services. The agreement is for a period of a minimum of three months and will continue unless otherwise terminated by either party by giving 30 days written notice.

Effective May 1, 2015, SDI executed an agreement with another non-related consultant to pay compensation of $3,800 (CAD $5,000) per month. The consultant is to assist with sales initiatives, demos and participate in trade shows. The agreement unless renewed by mutual consent expires December 31, 2015. The consultant is also entitled to a 5% cash commission for all completed direct sales to end users and a 2% cash commission for all completed indirect sales. In addition, as a sales incentive, the company may grant stock options at market prices, being 25,000 stock options for every 5,000 rounds sold, to a maximum of 200,000 options. Either party may terminate the consulting agreement by giving 60 days written notice.

12

SECURITY DEVICES INTERNATIONAL, INC.
Notes to Interim Consolidated Financial Statements
August 31, 2015
(Amounts expressed in US Dollars)
(Unaudited)

Effective April 2014, SDI executed an agreement with a non-related consultant to set up its social media sites and optimization of search engines for the Company, at a start- up fee for CAD$3,000 (Phase 1) and payment of CAD$1,500 per month and issued 100,000 stock options at $0.32 (CAD$0.35) when Phase 2 of the project was implemented (refer to note 6).

Effective August 2014, SDI executed an agreement with a non-related consultant to pay compensation of $5,500 per month for the first 5 months and $5,000 from sixth month to end of the term. The consultant is to assist with sales initiatives, demos and participate in trade shows. The agreement unless renewed by mutual consent expires December 31, 2015. On renewal, there will an annual increase of 4.5% effective January 1, 2016. The consultant is also entitled to a 5% cash commission for all completed direct sales to end users and a 2% cash commission for all completed indirect sales. The Company granted 50,000 stock options to the consultant on July 25, 2014 and has agreed to grant 25,000 stock options for every 5,000 rounds sold domestically to a maximum of an additional 150,000 options. Either party may terminate the consulting agreement by giving 30 days written notice.

Effective January 1, 2015, SDI executed an agreement with a non-related public relation consultant to pay compensation of $7,000 per month and an additional compensation of $250 per month for media monitoring services. The agreement shall be for an initial period of one year and thereafter will renew automatically for additional periods of one year each. Either party may cancel this agreement without cause, by giving no less than ninety days’ notice.

b) The Company has commitments for leasing office premises in Oakville, Ontario, Canada to April 30, 2018 at a monthly rent of $5,145 (CAD $6,399).

c) Effective April 17, 2015, the Company signed a five-year, non-exclusive, renewable Technology License and Supply Agreement (“TLSA”) with United Tactical Solutions (“UTS”) of Chicago, IL.

UTS is a global provider of specialized less-lethal solutions, with an extensive U.S. customer base, and international customers worldwide.

Under the terms of the TLSA, UTS will purchase volume quantities of SDI’s full range of products for private labeling and re-sale under the UTS Conflict Defense Solutions (“CDS”) brand. Sales will be through the global UTS network across military, law enforcement and correctional service agencies. The TLSA includes an initial Standing Offer from UTS for US$500,000 as a contracting vehicle for volume purchases, with related provisions that guarantee minimum annual quantity purchases.

The TLSA also provides SDI with access to the UTS training network for end-user certification on SDI products within these agencies.

The Company entered into a Development, Supply and Manufacturing Agreement with the BIP Manufacturer on July 25, 2012. This Agreement provides the Company to order and purchase only from the BIP Manufacturer certain 40MM assemblies and components for use by the Company to produce less-lethal and training projectiles as described in the Agreement. The Agreement is for a term of five years with an automatic extension for an additional year if neither party has given written notice of termination prior to the end of the five year period.

The Company and a division of Abrams Airborne Manufacturing Inc. (AAMI), namely Milkor USA (MUSA), agreed to partner for a joint cross-selling / marketing initiative.

This arrangement allows both companies to leverage existing and future sales channels by offering a comprehensive, full-package of Milkor USA’s 40mm Multi-Shot Grenade Launchers in conjunction with SDI’s 40mm Less-Lethal ammunition product-line to end-users globally.

13

SECURITY DEVICES INTERNATIONAL, INC.
Notes to Interim Consolidated Financial Statements
August 31, 2015
(Amounts expressed in US Dollars)
(Unaudited)

$1,398,592 (CAD $1,549,000) Convertible Debentures

On August 6, 2014, the Company issued $1,398,592 (CAD $1,549,000) face value 12% convertible debentures with a term to August 6, 2017 (the “Maturity Date”). At any time while the debentures are outstanding, the holder has the option to convert the outstanding principal of the debentures into common shares of the Company at a fixed conversion price of CAD $0.50 per share. At any time after February 6, 2015, the Company has the right to force the conversion of the debentures into common shares at a price of at least CAD$0.65 per common share for a period of at least 20 consecutive trading days. If the common shares do not trade on any trading day and the bid price of the common Shares is CAD $0.65 or greater, the common shares shall be deemed to have traded at a price of at least CAD $0.65 on that trading day. Additionally, the Company has the right to redeem the debentures, in whole or in part, (a) during the 12 months ending August 6, 2015, at a premium of 15% to the principal amount being redeemed plus any accrued interest, (b) during the 12 months ending August 6, 2016, at a premium of 5% to the principal amount being redeemed plus any accrued interest, (c) during the 12 months ending August 6, 2017, at a premium of 2% to the principal amount being redeemed plus any accrued interest. In connection with the financing, the Company issued warrants to placement agents to purchase 151,900 shares of common stock at an exercise price of CAD $0.50 per share. Additionally, the Company incurred $157,293 (CAD $174,209) in financing fees.

The Company has evaluated the terms and conditions of the convertible debentures and placement agent warrants under the guidance of ASC 815. The conversion feature met the definition of conventional convertible for purposes of applying the conventional convertible exemption. The definition of conventional contemplates a fixed number of shares issuable under the arrangement. The instrument was convertible into a

fixed number of shares and there were no down round anti-dilution protection features contained in the contracts. The Company was required to consider whether the hybrid contract embodied a beneficial conversion feature (“BCF”). The debentures did not result in a BCF because the conversion price was not in the money on the inception date. There were no terms or features contained in the warrant agreement that would preclude the warrants from achieving equity classification.

The following table reflects the allocation of the purchase on the financing date:

The warrants were valued at $33,583 and were recorded as a component of deferred financing costs. Interest expense related to the debentures amounted to $173,707 for the nine- month period ended August 31, 2015. Of the $173,707, $125,989 related to accrued interest and the remaining $47,718 related to the amortization of deferred financing costs.

14

SECURITY DEVICES INTERNATIONAL, INC.
Notes to Interim Consolidated Financial Statements
August 31, 2015
(Amounts expressed in US Dollars)
(Unaudited)

Inventory as of August 31, 2015 consist of finished goods of Blunt Impact Projectiles 40mm for $54,938 (November 30, 2014: $120,246) and 40mm LMT launchers for $13,990 (November 30, 2014: $nil) which are held at the BIP manufacturer.

On May 29, 2015, the Company accepted a $2,500,000 subscription for the sale of 7,575,757 common stock at a price of $0.33 (CAD $0.41) per share on a non-brokered private placement basis. The funds were held in escrow, as the closing of the private placement was subject to approval of the new insider by the TSX- Venture Exchange, as required under stock exchange rules. The funds were thus reflected as restricted cash for the quarter ended May 31, 2015. Subsequent to the quarter, in June 2015, the Company received approval from the TSX-Venture exchange and funds were released from escrow.

15

PART II

Item 2.     MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND PLAN OF OPERATION

THREE MONTHS ENDED AUGUST 31, 2015

The following discussion and analysis of the financial condition and results of Security Devices International, Inc. (also referred to as "we", "us", "our", "SDI", or the "Company"), should be read in conjunction with the Company's financial statements (and related notes) as at November 30, 2014.

The following discussion contains forward-looking statements, which are subject to risks and uncertainties and other factors that may cause SDI’s results to differ materially from expectations. When reviewing the Company's forward-looking statements, investors and others should carefully consider the foregoing factors and other uncertainties and potential events. These include risk relating to market fluctuations, performance, , strength of the North American and other world economies and foreign exchange fluctuations. These forward-looking statements speak only as of the date hereof. Unless otherwise required by applicable securities laws, the Company disclaims any intention or obligation to update these forward-looking statements. The Company does have an ongoing obligation to disclose material information as it becomes available. The discussion also includes cautionary statements about these matters. You should read the cautionary statements made below as being applicable to all forward-looking statements wherever they appear in this document.

Business

History

Security Devices International Inc. (the “Company” or the “Corporation”) was incorporated on March 1, 2005. The Company began as a research and development company focused on the development of 40mm less-lethal ammunition. The term 40mm refers to the diameter of the bullet (sometimes also referred to as a round or a projectile) and bullets of this size are required for standard issue military riot guns. 40mm bullets are also the emerging standard among riot guns used by police forces and correctional services, although many police forces are currently using 37mm riot guns. 40mm rounds are quickly becoming the industry standard in both military and law enforcement circles.

The Company began with development of a wireless electric projectile (a “WEP”), named the Lektrox. The Company hired a ballistics engineering firm to collaborate in the development of the WEP. The WEP uses mini-harpoons to fix the bullet to the target's clothing or body. The bullet contains an electrical system that releases a charge that imitates the electro-neural impulses used by the human body. Sending out a control signal to the muscles, this high-voltage low-current pulse overrides the target's nervous system inducing a muscle spasm that causes the target to fall to the ground helpless.

Commencing in December 2008, the Joint Non-Lethal Weapons Directorate (“JNLWD”) of the US Department of Defense, an organization responsible for the development and coordination of non-lethal weapons activities within the United States, tested the WEP through its evaluation facility at Penn State University. The testing evaluated the effectiveness and safety of the electrical output compared to the Government’s standard total body effects model. Testing was completed in November 2009 and a report was prepared by Penn State University and submitted to the JNLWD in January 2010. An executive summary was released to the Company indicating a positive outcome. Research and development continued on the WEP until mid-2010.

To reduce kinetic energy levels, the head of the WEP contains a cushioning mechanism composed of a collapsible material that enlarges the contact surface and absorbs part of the impact. In June 2010, the Company began development of a 40mm blunt impact projectile (the “BIP”), which used the cushioning mechanism of the WEP but did not contain the electrical mechanism of the WEP. The BIP used the pain of impact to obtain compliance from the target.

16

In the fall of 2010 the Company underwent a change in the board of directors and management. Two new directors were appointed and the board of directors appointed a Chief Operating Officer. The Company contracted with Level 4 Capital Corp. to assist with restructuring of the Company, contract negotiations and operational issues.

Early in 2011 the Company decided to focus its attention on the BIP and to discontinue further development work on the WEP. The Company concluded that the cost and time required to complete development and testing of the BIP were significantly less than that required to complete development and testing of the WEP. The BIP is also less expensive to produce than the WEP, and can be sold for a lower price. The Company plans to use revenue received from BIP sales to complete the development and production line for the WEP.

In 2011, the Company moved its engineering, intellectual property and production facilities to the operator (the “BIP Manufacturer”) of an injection molding facility outside of Boston, Massachusetts. The BIP Manufacturer has a history of manufacturing 40mm components for the military sector, and provides molding services to the medical, aerospace, petrochemical, commercial, electronics, and defense industries.

The Company attended several military tradeshows through 2011 and signed a teaming agreement with Chemring Ordnance Inc. (“Chemring”), of Perry, Florida in December 2011. The agreement gives Chemring the non-exclusive right to market and sell the BIP worldwide for a five- year term. Chemring is responsible for its costs of marketing the BIPs and BIPs sold through this arrangement will bear the Chemring brand. The Company has retained the right to market the BIP directly to military, law enforcement and government agencies outside of Chemring’s sales channels.

Research and development for the BIP was completed in the summer of 2012, although numerous improvements have been made to the BIP including improved ballistic flight and stability. The latest and final version on the BIP was introduced during the first quarter of 2014.

In November 2012, the Company obtained a United States Department of Transportation number (DOT#) required in order for the Company to ship BIP rounds.

In June 2012, the Company contracted CRT Less Lethal Inc. (“CRT”) to test the BIP. CRT is a Seattle- based company founded in 2003 with expertise in the analysis, evaluation and human effects testing of less-lethal munitions. The testing protocol included accuracy, precision, consistency, muzzle and target energy, impact energy density and effective range of the BIP. Human volunteers were used during the test firing, revealing full effects to the lower body from the blunt trauma of the BIP. Extensive wound profiling from the tests were finalized in a detailed report from CRT. Based on data obtained from the three-stage evaluation, the BIP passed the CRT testing protocol for accuracy, consistency, relative safety and effectiveness.

In July 2012, the Company signed a five-year development, supply and manufacturing agreement with the BIP Manufacturer. An engineering team is available to the Company through the BIP Manufacturer for development of all of the core components of the BIP and any product changes that are necessary.

During 2012, the Company attended several law enforcement tradeshows and conducted live fire demonstrations with government agencies in Canada, and the US. Live fire demonstrations allow the Company to demonstrate the short and long distance firing capabilities, accuracy and relative safety of the BIP.

In 2012, the Company began the development of five new less-lethal ammunition rounds. These new rounds will be a modified version of the BIP, four of which will carry a payload, including; BIP MP (temporary powder-based marking agent), BIP ML (semi-permanent liquid marking agent), BIP OC (Oleoresin Capsicum - a pepper spray powder), BIP MO (malodorant liquid), and the BIP TR (training round). As of the first quarter of 2015, the Company has now moved into extensive, independent testing with the payload rounds.

17

In 2013, the Company moved its full manufacturing operations to a supply manufacture and engineering company in the Boston, MA area. This allowed the Company to become fully autonomous from its previous partner, Chemring Ordnance of Florida, USA. SDI decreased its manufacturing costs in this process and is in full control of its manufacturing and logistics processes as a result.

The Company undertook an Initial Public Offering (IPO) in January 2013, and became a public reporting issuer on the TSX-Venture Exchange in September 2013.

Montreal Police also purchased rounds for testing and evaluation from SDI.

In the fourth quarter of 2013, SDI sold rounds to Orange County Florida Sheriff’s department for use by their SWAT team as well as Campbell County, Virginia for SWAT use, and Indian River Sheriff’s Department in Florida for use in their Correctional Services facility.

In November 2013, SDI’s BIP rounds were showcased at the International SWAT Competition in Florida. The event hosted 57 SWAT teams from around the world that competed in a week long competition. SDI’s BIP rounds were used by the competing teams in the less-lethal competition, giving SDI international exposure for their rounds.

During 2013, several federal, provincial, state, and municipal government agencies ordered small batches of operational rounds, as well as varied rounds for testing and evaluation, across North America. Some of the agencies were re-orders from previous sales.

SDI began another globally recognized testing protocol with a military agency called HECOE (the Human Effects Centre of Excellence). This world-renowned agency is located in the Air Force Research Laboratory (AFRL), in partnership with the US Joint Non-lethal Weapons Directorate (JNLWD). This group conducts research to assist Non-lethal Weapon (NLW) Program Managers across the U.S. Department of Defense (DoD) in assessing effectiveness and risks of NLWs. This information is used to develop dose response curves for the particular systems under review, identify data gaps and determine additional research requirements, and provide this information to those within the DoD who make policy and acquisition decisions. In September 2014, SDI received a report from The Human Effects Centre of Excellence which had conducted extensive testing on SDI’s Blunt Impact Projectile (BIP) rounds. The results concluded that the BIP is an effective and safe round and approves the use of the BIP by the US Military. The overall results were excellent and confirm the results of previous testing that shows SDI as a leader in safety and effectiveness in the 40MM non-lethal market.

18

In May, 2014, SDI’s BIP rounds were used at the Mock Prison Riot in West Virginia. Law enforcement and correctional services officers provided feedback on new technologies (such as SDI’s products) to assist in the effectiveness of their jobs. There were tactical teams that measured their skill sets against other teams from around the world at the demonstrations. SDI rounds outperformed several of their competitors.

On April 30, 2014, SDI appointed Keith Morrison to the board of directors as non-executive Chairman. Mr. Morrison is the CEO of North American Nickel Inc., a publically traded Canadian Exploration Company. He is currently on the Board of Directors of Marengo Mining, a TSX listed company with a Copper Deposit in Papua New Guinea. He was a co-founder and CEO of Quantec Geoscience from 1986 until 2008, that developed industry leading ground geophysical subsurface imaging technologies and has completed more than 3000 resource projects around the world. Keith has an undergraduate degree in Engineering Geophysics from Queen’s University and has completed the ICD Director’s Education Program at the University Of Toronto Rotman School Of Business. Mr. Morrison’s extensive business experience and corporate governance focus, will assist SDI in the next phase of the Company’s growth.

On August 6, 2014, the Company completed the issuance of 1,549 convertible unsecured debentures at $1,000 per debenture for gross proceeds of $1,549,000 (the “Private Placement”).

The Debentures mature on August 6, 2017 and bear interest at the rate of 12% per annum calculated and payable semi-annually. Each Debenture is convertible at the election of the holder into common shares of the Company (the “Common Shares”) at a price of $0.50 per Common Share, exercisable at any time prior to the maturity of the Debentures.

At any time after February 6, 2015, the Company has the right to force the conversion of the Debentures into Common Shares if the Common Shares trade at a price of at least $0.65 per Common Share for a period of at least 20 consecutive trading days. If the Common Shares do not trade on any trading day and the bid price of the Common Shares is $0.65 or greater, the Common Shares shall be deemed to have traded at a price of at least $0.65 on that trading day.

The Company has the right to redeem the Debentures, in whole or in part, (a) during the 12 months ending August 6, 2015, at a premium of 15% to the principal amount being redeemed plus any accrued interest, (b) during the 12 months ending August 6, 2016, at a premium of 5% to the principal amount being redeemed plus any accrued interest, (c) during the 12 months ending August 6, 2017, at a premium of 2% to the principal amount being redeemed plus any accrued interest.

The Debentures, and any Common Shares issued under the Debentures, are subject to a hold period which expired on February 6, 2015.

Proceeds from the private placement were used for the expansion of the Company’s sales force network, the purchase of inventory and working capital purposes.

The private placement was conducted on a brokered private placement basis. Fin-XO Securities Inc. (the “Agent”) acted as agent. The Agent received (a) a cash commission of $105,930, (b) non-transferrable warrants to purchase 151,900 Common Shares at a price of $0.50 per share ending August 5, 2016, (c) a corporate finance fee of $8,475, and (d) reimbursement of the expenses of the Agent.

During the year ended November 30, 2014, the Company named Karim Kanji to the board of directors as an independent member. Mr. Kanji is a senior, global executive with a proven track record in positioning companies for growth, profitability and acquisition. Karim has shown an exceptional ability to build, groom, mentor and mobilize leadership in order to capture and sustain growth. His experience has been focused on engineering based technology companies with a broad knowledge in the industrial, energy, transportation and healthcare sectors.

19

Karim’s wide-ranging competencies include macro corporate strategies, operational planning, M&A tactics, paths for growth, product development, cost reduction, cash management, and commercial / legal compliance. Mr. Kanji’s

tenures include; President and CEO Lumen Dynamics (managed a successful sale of the company in November 2013), President Clinicare/Chartcare IT Services (negotiated the company’s divestiture in year-two of his contract), Executive Officer at SEALS Ltd. a subsidiary of ICTS Europe Group (completed acquisition and post-closing activities - 2011), Vice President and Vice President of Mergers & Acquisitions at Siemens Canada (total revenue responsibility >$500 million), General Manager and Finance Director Siemens Canada (with regional sales of $350

million), and has served on several boards of both public and private entities. Karim holds several degrees including his eMBA, MBA, CPA, CMA, and his masters in law from Osgoode Hall. Mr. Kanji’s wealth of practical experience will assist SDI well, in the next phase of the Company’s growth. Karim will assume the role as the Chairman of the Audit committee, given his strong financial background.

In October 2014, Security Devices International Inc. (“the Company”) announced that the Company and a division of Abrams Airborne Manufacturing Inc. (AAMI), namely Milkor USA (MUSA), have agreed to partner for a joint cross-selling / marketing initiative.

This arrangement allows both companies to leverage existing and future sales channels by offering a comprehensive, full-package of Milkor USA’s 40mm Multi-Shot Grenade Launchers in conjunction with SDI’s 40mm Less-Lethal ammunition product-line to end-users, globally. This mutually beneficial opportunity allows both Milkor USA and SDI to provide target markets with complimentary, top quality products. By pairing and cross-marketing each other’s unique and proven hardware, each can now offer end-users the ability to carry out their responsibilities with premium brands, a one-stop shop and best-in-class solutions. Milkor USA is the world’s premier provider of 40mm Multi-Shot Grenade Launchers (MSGL) and is focused on being the global choice for high quality, safe and effective weapons systems. MUSA has proven its ability to place its launcher’s into the hands of each major branch of the U.S. Military, as well as offering their MSGLs internationally to NATO allies’ military and police forces.

In January 2010, MUSA won the Indefinite Delivery/Indefinite Quantity (IDIQ) contract with the United States Marine Corps. This 5-year contract was valued for up to 40 million dollars. The newly dubbed M32A1 Multi-Shot Grenade Launcher is the product of this contract, with its price and configuration controlled, via contract, by the USMC. The contract is due to expire in January 2015. Abrams Airborne Manufacturing, Inc. is an aerospace, defense, medical and commercial manufacturer based in Tucson, Arizona. The company has been in business since April of 1965 and is renowned for its capabilities relating to high quality manufacturing.

SDI has sold their BIP products into nine new agencies during the fiscal year of 2014 including Sheriff Departments, Correctional Services, and SWAT teams in; Saskatoon, SK, Watertown, SD, Abbotsford, BC, Sacramento, CA, Kingston, ON, Rustburg, VA, Orlando, FL, Montreal, QC, and Bedford, VA. These agencies are additions to SDI’s customer base that have adopted its 40mm less-lethal rounds.

SDI saw continued sales in the first quarter of 2015, including re-orders from the Correctional Service of Canada and the Montreal Police as well as new orders from The Los Angeles County Sheriff’s Department, Royal Canadian Mounted Police, Collier County Sheriff Department (Florida), Kings County Sheriff’s Department (California), Sioux Falls Police Department (South Dakota) and Pennington County Sheriff’s Department (South Dakota).

The Management team of SDI attended the SHOT show in January where SDI’s products were displayed in 3 separate booths by SDI’s industry associates. The feedback and response to SDI’s innovative product line was very favorable and clearly the most modern technology available in the less lethal space for 40MM rounds.

SDI was invited to attend a less-lethal chemical munitions course in California and introduce SDI’s unique Malodorant, OC and tear gas rounds. The result was a high level of interest from attending Government Agencies and follow-up is being conducted by SDI’s sales team.

20

SDI’s public relations program is in effect and SDI has been interviewed for and presented in numerous newspapers and industry magazines during the quarter ended February 28, 2015, including Gun magazine, Law Enforcement Technology magazine, St. Louis Dispatch newspaper, Stockton record and Police one magazine line.

In March 2015, SDI was invited to speak at the Launch festival in San Francisco, to present their innovative less-lethal technology during a panel discussion on the future of policing. The Launch festival focuses on start-up and emerging technology companies and the festival was streamed to approximately 4 million viewers.

During the second quarter, SDI attended the American Jail Association’s annual conference in North Carolina and performed a live fire demonstration to numerous State and local Agencies while in North Carolina.

During Q2, SDI also attended the Canadian Tactical Conference in Collingwood, Ontario as well as the New York Tactical Conference in Verona, New York.

Through SDI’s distributor (U.S. Tactical Supply– GSA) the Company was able to leverage their relationship to facilitate a live-fire demonstration for the Pentagon Protection Force in Alexandria, Virginia.

In May of 2015, SDI participated in the “Mock Prison Riot” which takes place annually at a decommissioned penitentiary in Moundsville, West Virginia. The Mock Prison Riot is a four-day, comprehensive law enforcement and corrections tactical and technology experience, including 40,000 square feet of exhibit space, training scenarios, technology demonstrations, certification workshops, a Skills Competition, and unlimited opportunities for feedback, networking, and camaraderie on a global scale.

SDI enhanced their customer base in the quarter by adding 9 new agencies in multiple States and Provinces both in Canada and the US.

In May, SDI was featured on Fox news’s ‘Technology Take’ program, which focuses on innovative and ground breaking technologies. The Company’s products were featured in response to emerging violent confrontations in the US between the Police and protestors and the lack of appropriate tools for law enforcement to subdue unruly crowds without risking injury.

Also in May, SDI was featured, along with their manufacturer on FOX news Boston and by several Boston area newspapers. The unique technology and expanded product line, including the Malodorant and DNA capabilities offered by SDI, was the focus of the news.

SDI staff attended the Ohio Tactical officers conference in June where the Company not only had a full exhibit booth set up to bring awareness to SDI’s full line of less lethal 40MM products but also conducted live fire demonstrations to several agencies who had requested seeing the projectiles fired to move forward with evaluation of SDI’s products for potential inclusion in their less lethal arsenal.

In July SDI was invited to present the company’s full line of products to the New York City Police Department. Representatives of SDI attended the NYPD range and conducted in-class presentations followed by a live fire demonstration showcasing the full line on 40MM products that SDI can offer for Law Enforcement operational missions.

In July, the Associated Press (AP), conducted interviews with SDI management and attended SDI’s manufacturing partners location for an in depth look at the company and the technology. The AP completed a story on the uniqueness of the product line and the increased element of safety that SDI’s products offer and releases the story to the newswire, where it was picked up by almost 800 media outlets worldwide.

During August, SDI was invited to present to the Toronto Police Service, who are currently exploring less lethal options for front line officers. A full presentation was given to decision makers of the TPS and a follow-up live fire demonstration will be occurring in the 4^th quarter of this year.

During this quarter SDI continued to increase its customer base in Law Enforcement and Corrections and was able to fulfil all orders in a timely manner.

Products

SDI’s business is the development, manufacture and sale of less-lethal ammunition. This ammunition is used by the military, correctional services, and police agencies for crowd control.

The Company has developed the BIP, a blunt impact projectile which uses pain compliance to control a target. The Company is developing five versions of the standard BIP, four of which contain a payload and one of which is a cheaper cost, training round. A payload is an internal capsule within the BIP, which holds a liquid or powder substance.

In addition, the Company has undertaken substantial work for future development of the WEP, a wireless electric projective which releases an electrical pulse that induces a muscle spasm and causes the target to fall to the ground helpless.

21

Intellectual Property:

Four patent applications, one for the electrical mechanism and the other three for the mechanical mechanism of the WEP40, have been filed by the Company with the U.S. Patent Office. The Company has been issued four patents.

(a) Less-lethal Projectile: This issued patent relates to the Company’s distinctive collapsible ammunition head technology that absorbs kinetic energy of the projectile upon impact. The Corporation’s collapsible head is used in both the BIP and the WEP.

(b) Electronic Circuitry for Incapacitating a Living Target: This issued patent relates to the electronic circuitry incapacitation system which forms part of the WEP. The patent describes an electronic circuit which provides an electrical incapacitation current to a living target.

(c) Less-lethal Wireless Stun Projectile System for Immobilizing a Target by Neuro-Muscular Disruption: This issued patent describes the process by which the WEP operates with its attachment system to halt a target through a neuro-muscular-disruption system.

(d) Autonomous Operation of a Less-lethal Projectile: This pending patent describes a motion sensing system within the WEP. The sensor will monitor movement of the target and enable the electrical output until the target is subdued. The electrical pulse is programmed for an exact time-frame to specifications of the user.

The Company has filed the following applications in 2014:

1) United States Provisional Patent Application No. 61/926,728, filed on January 13, 2014, entitled PAYLOAD CARRYING ARRANGEMENT FOR A NON-LETHAL PROJECTILE

2) PCT Patent Application No. PCT/US2014/44892, filed on June 30, 2014, entitled PAYLOAD CARRYING ARRANGEMENT FOR A NON-LETHAL PROJECTILE, and claiming priority from USPAN 61/926,728

22

Less-Lethal Sector

Military, correctional services and law enforcement agencies are seeking alternatives to traditional lethal ammunition. From a military standpoint, the involvement of armed forces in populated areas has created a need for less-lethal ammunition. Correctional services agencies require a close range projectile for usage inside their holding facilities and penitentiaries, and police forces require less-lethal ammunition for riot control and critical incident de-escalation, motivated in part by a desire to avoid expensive litigation.

Chemical irritants (such as tear gas) have been sporadically used by military and have been adopted by police forces around the world for use in riot control.

Throughout the 1970’s and 1980’s the military and police forces began to use kinetic energy impact projectiles. These projectiles included wood, rubber and bean-bag material as ammunition. Many of these projectiles are still being used by military and police forces around the world. There has been very little technology progression within this space over the last half a century.

The rubber bullet was developed by the Ministry of Defense for the British Army in Northern Ireland at the request of army officers who wanted a weapon for use in civil disturbances with a range beyond a stone-throwing distance. In management’s opinion, rubber bullets are inaccurate and have unpredictable ricochets. In addition, management believes that they have caused numerous severe injuries and several deaths.

The nature of a military’s role has changed significantly to the extent that the military becomes actively engaged in the policing of civilian populations. This is where the military in effect, intersects with local police forces to support and uphold national and regional law. Today, military units are involved in ongoing conflicts that bring them into direct contact with civilian populations in Iraq, Afghanistan and various countries in the Middle East. Soldiers who are deployed in humanitarian roles are often subject to rules of engagement, which disallow the use of deadly force unless soldiers encounter a lethal threat. The military requires less-lethal deterrent ammunition for use in crowd and riot control, perimeter security and pilfering situations. In management’s opinion, less-lethal ammunition means a greater opportunity to preserve life.

Police and military forces require easily applied options for riot control without the consequences of lethal force. In addition to the litigation, administrative and financial resources required to defend the use of lethal force, there is a moral consideration as well. Police and military forces must balance the risk of injury or death to their own personnel against the risk of injury to civilians, including bystanders. Riot control involves difficult and challenging decisions that often must be made within seconds.

Both police and military personnel are demanding access to options that fall somewhere between physically charging into a crowd with batons and firing munitions designed to kill targets. If these personnel are equipped and trained with less-lethal munitions, they are better equipped to diffuse a riot and regain control. By providing soldiers and police with a midlevel force response, appropriate to the level of threat, the chance of an escalation can be reduced. In addition, if this less-lethal response can be employed at a standoff distance, the troops or officers can maintain a buffer zone between themselves and the crowd. The capability to target a specific individual, as opposed to spraying an entire crowd, reduces the risk of injury to innocent bystanders and political backlash.

Conflicts in Iraq and Afghanistan, events such as the August 2011 UK riots, and the June 2012 Quebec student street violence have led governments, police and defense decision-makers to seek cost effective less-lethal weapons. These decision-makers understand that social media will limit the use of lethal weapons and a new generation of less-lethal weapons is required.

Correctional Services facilities have suffered with the ability to control a subject without using excessive force. The Company’s product allows for a correctional officer to deploy a projectile at close range without harming the subject and still maintain protocol within their agency. In management’s opinion, the projectile suffices pain compliance on the subject, with properly followed safety precautions.

23

General

Going Concern

The Company has incurred a cumulative loss of $25,467,782 from inception to August 31, 2015 which includes a non-cash stock based compensation expense of $7,237,381 for issue of options and warrants. The Company has funded operations through the issuance of capital stock and convertible debentures. The Company has started to generate revenue from operations. However, it still expects to incur significant expenses before becoming profitable. The Company’s future success is dependent upon its ability to raise sufficient capital or generate adequate revenue, to cover its ongoing operating expenses, and also to continue to develop and be able to profitably market its products. These factors raise substantial doubt about its ability to continue as a going concern. The financial statements do not include any adjustments that might result from the outcome of this uncertainty.

In addition to raising funds in the prior years, the Company raised $160,000 through the issuance of 800,000 common shares during the year ended November 30, 2011. The Company further raised an additional $878,328 by issue of Convertible Debentures during the year ended November 30, 2011 and $910,000 during the year ended November 30, 2012. In addition, the Company raised $649,750 by issuance of 2,165,834 common shares during the year ended November 30, 2012. On August 15, 2013, the Company filed an amended and restated final prospectus (the “Prospectus”) in Canada, in the provinces of Alberta, British Columbia and Ontario for listing its shares in these provinces in Canada. On August 27, 2013 the Company completed an initial public offering to raise gross proceeds of CAD $3,993,980 (US $3,794,280) through the issuance of 9,984,950 Common Shares at a price of CAD $0.40 (US $0.38) per Common Share (the “Issue Price”). During the year ended November 30, 2014, the Company issued $1,398,592 (CAD $1,549,000) face value 12% convertible debentures with a term to August 6, 2017 (the “Maturity Date”) and raised net $1,241,299. In addition, during the nine-month period ended August 31, 2015, the Company raised $2,500,000 through the issuance of 7,575,757 common shares and also issued 105,600 common shares on exercise of warrants for $16,775 and 35,000 common shares on exercise of options for $6,995. The Company’s common shares commenced trading on the TSX Venture Exchange (“TSX”) under the symbol “SDZ”.

Significant Quarterly Information

The following represents selected information of the Company for the most recently completed financial quarter ended August 31, 2015

24

Results of Operations

SDI was incorporated on March 1, 2005 and for the period from inception to August 31, 2015 has not realized significant revenues. The company has started to generate revenue from operations. However, it still expects to incur expenses before becoming profitable.

Financial highlights (unaudited) for the three month and nine- month period ending August 31, 2015 with comparatives are as follows:

The Company’s selected information for the nine- month period ended August 31, 2015 (unaudited) and November 30, 2014 (audited) are as follows:

25

Net loss for the three months ended August 31, 2015 was $467,538 ($0.01 per share) as compared to $445,163 ($0.01 per share) for the three- month period ended August 31, 2014. There is no significant increase/decrease in costs for the three- month period ended August 31, 2015 as compared to prior period ended August 31, 2014.

Cash Flows

Net cash used in operations for the nine months ended August 31, 2015, was $1,417,684 as compared to $1,336,586 used for the nine months ended August 31, 2014. The major components of change relate to: 1) Items not affecting cash:

a) Stock based compensation of $nil in 2015, as compared to $222,422 in 2014.

2) Changes in non- cash balances relating to operations:

i) The Company’s inventory decreased by $51,318 in 2015 as compared to increase of $32,886 in 2014.

ii) The Company’s accounts payable and accrued liabilities decreased by $91,117 in 2015 as compared to a decrease of $36,170 in 2014.

Net cash flow from investing activities was $nil in 2015 as compared to $37,625 in 2014. During the prior period, the Company acquired additional moulds for production of its newer BIP model.

Net Cash flow from financing activities was $2,523,770 in 2015 as compared to $1,253,799 in 2014. The increase in cash in current period is primarily a result of proceeds of $2,500,000 received on issuance of 7,575,757 common shares received on a private placement.

There was an overall increase in cash and cash equivalent of $1,075,942 in 2015 as compared to a decrease in cash and cash equivalent of $135,768 during 2014.

Liquidity and Capital Resources

As at August 31, 2015, cash was $2,160,948, as compared to $1,085,006 at November 30, 2014. This increase is mainly attributable to the combination of factors mentioned above under heading “Cash Flows”.

At August 31, 2015, the Company had a working capital of $2,376,467. The major components are as follows; cash $2,160,948; prepaid expenses and other receivables $67,595; inventory for $68,928; accounts receivable for $16,635; deferred financing costs for $122,959 and accounts payable and accrued liabilities of $60,598.

At November 30, 2014, the Company had a working capital of $1,306,347. The major components are as follows; cash and cash equivalent $1,085,006; prepaid expenses and other receivables $29,557; accounts receivable for $7,39; inventory for $120,246; deferred financing costs for $170,674 and accounts payable and accrued liabilities of $161,405.

26

There are no assurances that the Company can continue to raise equity financing to fund its operations. SDI does not have any commitments or arrangements from any persons to provide SDI with any additional capital it may need. Without additional capital SDI may not be able to fund its anticipated capital requirements.

Off-balance sheet arrangements

The Company has no significant off-balance sheet arrangements at this time.

Transactions with related parties

The following transactions are in the normal course of operations and are measured at the exchange amount, which is the amount of consideration established and agreed to by the related parties.

Nine months ended August 31, 2015

Two non-independent directors were compensated as per their consulting agreements with the Company. The Company expensed a total of $158,900 as management fees to these two directors, in their role as officers in accordance with their consulting contracts and expensed a total of $3,900 as automobile allowance.

The Company expensed $19,000 for services provided by the CFO of the Company and $166,500 for services provided by a corporation in which the Chief Operating Officer has an interest, in accordance with the consulting contract.

The Company reimbursed $65,700 to directors and officers for travel and entertainment expenses incurred for the Company.

Nine months ended August 31, 2014

The directors were compensated as per their consulting agreements with the Company. The Company expensed a total of $186,597 as management fees to its two directors and expensed a total of $5,400 as automobile allowance.

The Company expensed $20,840 for services provided by the CFO of the Company and $169,968 for services provided by a corporation in which the Chief Operating Officer has an interest.

The Company reimbursed $83,543 to directors and officers for travel and entertainment expenses incurred for the Company.

On May 9, 2014, the board of directors granted options to one director to acquire a total of 600,000 common shares. These options were issued at an exercise price of $0.32 (CAD $0.35) per share and vest immediately with an expiry term of five years. The fair value of each option used for the purpose of estimating the stock compensation is calculated using the Black- Scholes option pricing model. The Company expensed $140,573 as compensation expense.

Commitments

The non-independent directors of the Company executed consulting agreements with the company on the following terms:

Effective January 1, 2013, SDI executed a two year agreement with a company in which a director, Allen Ezer, has an interest. The agreement was extended for a period of two years ending December 31, 2016 at a monthly remuneration of CAD $8,925. Either party may terminate the consulting agreement by giving 90 days written notice. In the event of termination without cause due to change in control brought out by sale, lease, merger or transfer, the Company is obligated to pay severance of 12 months fees at current rate at time of change in control. Effective February 1, 2015, the Company and director agreed to reduce the monthly remuneration by 10% to CAD 8,032. This reduction continued until the completion of the next round of financing, which was completed in May 2015.

27

Agreement with the Chief Executive Officer Greg Sullivan to pay compensation of CAD$12,000 per month, with an annual 5% increase and a car allowance of CAD$600 per month. The agreement expires on December 31, 2016. In the event of termination without cause, the Company is obligated to pay two times the then annual compensation and by continuing the then benefits coverage for a period of 2 years. The annual remuneration will increase with accomplishment of milestones. The agreement may be terminated with mutual consent or by the Chief Executive Officer giving three weeks’ notice. Effective February 1, 2015, the Company and director agreed to reduce the monthly remuneration by 10% to CAD 12,502. This reduction continued until the completion of the next round of financing, which was completed in May 2015.

Effective October 1, 2014, SDI executed a renewal agreement with a company in which the Chief Operating Officer Dean Thrasher has an interest in, for a period which expires on December 31, 2017 for services rendered. The total consulting fees are estimated at CAD$864,000 for the three- year period. In the event of termination without cause due to change in control brought out by sale, lease, merger or transfer, the Company is obligated to pay severance of 18 months’ fees at current rate at time of change in control. SDI paid cash and expensed $230,892 during the year ended November 30, 2014. The company may also accept common shares in lieu of cash. As of November 30, 2014, the company has not exercised its right to accept this compensation in shares. Effective February 1, 2015, the Company and director agreed to reduce the monthly remuneration by 10% to CAD $21,600. This reduction continued until the completion of the next round of financing, which was completed in May 2015.

Effective November 1, 2013, SDI executed an agreement with a non-related consultant to pay compensation of $3,800 (CAD $5,000) per month. The consultant has agreed to provide corporate market advisory services. The agreement is for a period of a minimum of three months and will continue unless otherwise terminated by either party by giving 30 days’ written notice.

Effective May 1, 2015, SDI executed an agreement with another non-related consultant to pay compensation of $3,800 (CAD $5,000) per month. The consultant is to assist with sales initiatives, demos and participate in trade shows. The agreement unless renewed by mutual consent expires December 31, 2015. The consultant is also entitled to a 5% cash commission for all completed direct sales to end users and a 2% cash commission for all completed indirect sales. In addition, as a sales incentive, the company may grant stock options at market prices, being 25, 000 stock options for every 5,000 rounds sold, to a maximum of 200,000 options. Either party may terminate the consulting agreement by giving 60 days written notice.

Effective April 2014, SDI executed an agreement with a non-related consultant to set up its social media sites and optimization of search engines for the Company, at a start- up fee for CAD$3,000 (Phase 1) and payment of CAD$1,500 per month and issued 100,000 stock options at $0.32 (CAD$0.35) when Phase 2 of the project was implemented (refer to note 6).

Effective August 2014, SDI executed an agreement with a non-related consultant to pay compensation of $5,500 per month for the first 5 months and $5,000 from sixth month to end of the term. The consultant is to assist with sales initiatives, demos and participate in trade shows. The agreement unless renewed by mutual consent expires December 31, 2015. On renewal, there will an annual increase of 4.5% effective January 1, 2016. The consultant is also entitled to a 5% cash commission for all completed direct sales to end users and a 2% cash commission for all completed indirect sales. The Company granted 50,000 stock options to the consultant on July 25, 2014 and has agreed to grant 25,000 stock options for every 5,000 rounds sold domestically to a maximum of an additional 150,000 options. Either party may terminate the consulting agreement by giving 30 days written notice.

Effective January 1, 2015, SDI executed an agreement with a non-related public relation consultant to pay compensation of $7,000 per month and an additional compensation of $250 per month for media monitoring services. The agreement shall be for an initial period of one year and thereafter will renew automatically for additional periods of one year each. Either party may cancel this agreement without cause, by giving no less than ninety days’ notice.

b) The Company has commitments for leasing office premises in Oakville, Ontario, Canada to April 30, 2018 at a monthly rent of $5,145 (CAD $6,399).

c) Effective April 17, 2015, the Company signed a five-year, non-exclusive, renewable Technology License and Supply Agreement (“TLSA”) with United Tactical Solutions (“UTS”) of Chicago, IL.

28

UTS is a global provider of specialized less-lethal solutions, with an extensive U.S. customer base, and international customers worldwide.

Under the terms of the TLSA, UTS will purchase volume quantities of SDI’s full range of products for private labeling and re-sale under the UTS Conflict Defense Solutions (“CDS”) brand. Sales will be through the global UTS network across military, law enforcement and correctional service agencies. The TLSA includes an initial Standing Offer from UTS for US$500,000 as a contracting vehicle for volume purchases, with related provisions that guarantee minimum annual quantity purchases.

The TLSA also provides SDI with access to the UTS training network for end-user certification on SDI products within these agencies.

EXCLUSIVE SUPPLY AGREEMENT

The Company entered into a Development, Supply and Manufacturing Agreement with the BIP Manufacturer on July 25, 2012. This Agreement provides the Company to order and purchase only from the BIP Manufacturer certain 40MM assemblies and components for use by the Company to produce less-lethal and training projectiles as described in the Agreement. The Agreement is for a term of five years with an automatic extension for an additional year if neither party has given written notice of termination prior to the end of the five- year period.

The Company and a division of Abrams Airborne Manufacturing Inc. (AAMI), namely Milkor USA (MUSA), agreed to partner for a joint cross-selling / marketing initiative.

This arrangement allows both companies to leverage existing and future sales channels by offering a comprehensive, full-package of Milkor USA’s 40mm Multi-Shot Grenade Launchers in conjunction with SDI’s 40mm Less-Lethal ammunition product-line to end-users globally.

Revenue Recognition

The Company’s revenue recognition policies follow common practice in the manufacturing industry. The Company records revenue when it is realized, or realizable and earned. The Company considers revenue to be realized, or realizable and earned, when the following revenue recognition requirements are met: persuasive evidence of an arrangement exists; the products or services have been accepted by the customer via delivery or installation acceptance; the sales price is fixed or determinable; and collectability is probable. For product sales, the Company determines that the earnings process is complete when title, risk of loss and the right to use product has transferred to the customer.

Outstanding share data

As of September 30, 2015, the Company had 54,615,642 issued and outstanding shares of common stock.

Risk Factors

29

Additional Financing

The Corporation does not have adequate revenue to fund all of its operational needs and may require additional financing to continue its operations if it is unable to generate substantial revenue growth. There can be no assurance that such financing will be available at all or on favorable terms. Failure to generate substantial revenue growth may result in the Corporation looking to obtain such additional financing could result in delay or indefinite postponement of the Corporation’s deployment of its products, resulting in the possible dilution. Any such financing will dilute the ownership interest of the Corporation’s shareholders at the time of the financing, and may dilute the value of their shareholdings.

General Venture Company Risks

The Common Shares must be considered highly speculative due to the nature of the Corporation’s business, the early stage of its deployment, its current financial position and ongoing requirements for capital. An investment in the Common Shares should only be considered by those persons who can afford a total loss of investment, and is not suited to those investors who may need to dispose of their investment in a timely fashion. Investors should consult with their own professional advisors to assess the legal, financial and other aspects of an investment in Common Shares.

Uncertainty of Revenue Growth

There can be no assurance that the Corporation can generate substantial revenue growth, or that any revenue growth that is achieved can be sustained. Revenue growth that the Corporation has achieved or may achieve may not be indicative of future operating results. In addition, the Corporation may increase further its operating expenses in order to fund increase its sales and marketing efforts and increase its administrative resources in anticipation of future growth. To the extent that increases in such expenses precede or are not subsequently followed by increased revenues, the Corporation’s business, operating results and financial condition will be materially adversely affected.

Dependence on Management and Key Personnel

The Corporation is dependent on certain members of its management. The loss of the services of one or more of them could adversely affect the Corporation. The Corporation’s ability to maintain its competitive position is dependent upon its ability to attract and retain highly qualified managerial, specialized technical, manufacturing, sales and marketing personnel. There can be no assurance that the Corporation will be able to continue to recruit and retain such personnel. The inability of the Corporation to recruit and retain such personnel would adversely affect the Corporation’s operations and product development.

Dependence on Key Suppliers

The Corporation may be able to purchase certain key components of its products from a limited number of suppliers. Failure of a supplier to provide sufficient quantities on favorable terms or on a timely basis could result in possible lost sales.

Product Liability

The Corporation may be subject to proceedings or claims that may arise in the ordinary conduct of the business, which could include product and service warranty claims, which could be substantial. If its products fail to perform as warranted and it fails to quickly resolve product quality or performance issues in a timely manner, sales may be lost and it may be forced to pay damages. Any failure to meet customer requirements could materially affect its business, results of operations and financial condition. The occurrence of product defects and the inability to correct errors could result in the delay or loss of market acceptance of its products, material warranty expense, diversion of technological and other resources from its product development efforts, and the loss of credibility with customers, manufacturer’s representatives, distributors, value added resellers, systems integrators, original equipment manufacturers and end-users, any of which could have a material adverse effect on the Corporation’s business, operating results and financial conditions.

30

The Corporation currently has general liability insurance that includes product liability coverage. There is no assurance this insurance policy will cover all potential claims which may have a material adverse effect on the business or financial condition of the Corporation. A product recall could have a material adverse effect on the business or financial condition of the Corporation.

Strategic Alliances

The Corporation relies upon, and expects to rely upon, strategic alliances with original equipment manufacturers for the manufacturing and distribution of its products. There can be no assurance that such strategic alliances can be achieved or will achieve their goals.

Marketing and Distribution Capabilities

In order to commercialize its technology, the Corporation must either acquire or develop an internal marketing and sales force with technical expertise and with supporting distribution capabilities or arrange for third parties to perform these services. In order to market any of its products, the Corporation must either acquire or develop a sales and distribution infrastructure. The acquisition or development of a sales and distribution infrastructure would require substantial resources, which may divert the attention of its Management and key personnel, and defer its product development and deployment efforts. To the extent that the Corporation enters into marketing and sales arrangements with other companies, its revenues will depend on the efforts of others. These efforts may not be successful. If the Corporation fails to develop substantial sales, marketing and distribution channels, or to enter into arrangements with third parties for those purposes, it will experience delays in product sales and incur increased costs.

Rapid Technological Development

The markets for the Corporation’s products and services are characterized by rapidly changing technology and evolving industry standards, which could result in product obsolescence or short product life cycles. Accordingly, the Corporation’s success is dependent upon its ability to anticipate technological changes in the industries it serves and to successfully identify, obtain, develop and market new products that satisfy evolving industry requirements. There can be no assurance that the Corporation will successfully develop new products or enhance and improve its existing products or that any new products and enhanced and improved existing products will achieve market

acceptance. Further, there can be no assurance that competitors will not market products that have perceived advantages over the Corporation’s products or which render the products currently sold by the Corporation obsolete or less marketable. Regardless of the Industry as a whole, the less lethal sector moves somewhat slower in the adaptation and integration of new products.

The Corporation must commit significant resources to developing new products before knowing whether its investments will result in products the market will accept. To remain competitive, the Corporation may be required to invest significantly greater resources then currently anticipated in research and development and product enhancement efforts, and result in increased operating expenses.

Competition

The Corporation’s industry is highly competitive and composed of many domestic and foreign companies. The Corporation has experienced and expects to continue to experience, substantial competition from numerous competitors whom it expects to continue to improve their products and technologies. Competitors may announce and introduce new products, services or enhancements that better meet the needs of end-users or changing industry standards, or achieve greater market acceptance due to pricing, sales channels or other factors. Competitors may be able to respond more quickly than the Corporation to changes in end-user requirements and devote greater resources to the enhancement, promotion and sale of their products.

31

Regulation

The Corporation is subject to numerous federal, provincial, state and local environmental, health and safety legislation and measures relating to the manufacture of ammunition. There can be no assurance that the Corporation will not experience difficulties with its efforts to comply with applicable regulations as they change in the future or that its continued compliance efforts (or failure to comply with applicable requirements) will not have a material adverse effect on the Corporation’s results of operations, business, prospects and financial condition. The Corporation’s continued compliance with present and changing future laws could restrict the Corporation’s ability to modify or expand its facilities or continue production and could require the Corporation to acquire costly equipment or to incur other significant expense.

Intellectual Property

The Corporation’s ability to compete effectively will depend, in part, on its ability to maintain the proprietary nature of its technology and manufacturing processes. Although the Corporation considers certain of its product designs as well as manufacturing processes involving certain of its products to be proprietary, patents or copyrights do not protect all design and manufacturing processes. The Corporation has adopted procedures to protect its intellectual property and maintain secrecy of its confidential business information and trade secrets. However, there can be no assurance that such procedures will afford complete protection of such intellectual property, confidential business information and trade secrets. There can be no assurance that the Corporation’s competitors will not independently develop technologies that are substantially equivalent or superior to the Corporation’s technology.

To protect the Corporation’s intellectual property, it may become involved in litigation, which could result in substantial expenses, divert the attention of its management, cause significant delays and materially disrupt the conduct of its business.

Infringement of Intellectual Property Rights

While the Corporation believes that its products and other intellectual property do not infringe upon the proprietary rights of third parties, its commercial success depends, in part, upon the Corporation not infringing intellectual property rights of others. A number of the Corporation’s competitors and other third parties have been issued or may have filed patent applications or may obtain additional patents and proprietary rights for technologies similar to those utilized by the Corporation. Some of these patents may grant very broad protection to the owners of the patents. The Corporation has not undertaken a review to determine whether any existing third party patents or the issuance of any third party patents would require the Corporation to alter its technology, obtain licenses or cease certain activities. The Corporation may become subject to claims by third parties that its technology infringes their intellectual property rights due to the growth of products in its target markets, the overlap in functionality of those products and the prevalence of products. The Corporation may become subject to these claims either directly or through indemnities against these claims that it provides to end-users, manufacturer’s representatives, distributors, value added resellers, system integrators and original equipment manufacturers.

Litigation may be necessary to determine the scope, enforceability and validity of third party proprietary rights or to establish the Corporation’s proprietary rights. Some of its competitors have, or are affiliated with companies having, substantially greater resources than the Corporation and these competitors may be able to sustain the costs of complex intellectual property litigation to a greater degree and for a longer period of time than the Corporation. Regardless of their merit, any such claims could be time consuming to evaluate and defend, result in costly litigation, cause product shipment delays or stoppages, divert management’s attention and focus away from the business, subject the Corporation to significant liabilities and equitable remedies, including injunctions, require the Corporation to enter into costly royalty or licensing agreements and require the Corporation to modify or stop using infringing technology.

The Corporation may be prohibited from developing or commercializing certain technologies and products unless it obtains a license from a third party. There can be no assurance that it will be able to obtain any such license on commercially favorable terms or at all. If it does not obtain such a license, it could be required to cease the sale of certain of its products.

32

Health and Safety

Health and safety issues related to its products may arise that could lead to litigation or other action against the Corporation or to regulation of certain of its product components. The Corporation may be required to modify its technology and may not be able to do so. It may also be required to pay damages that may reduce its profitability and adversely affect its financial condition. Even if these concerns prove to be baseless, the resulting negative publicity could affect the Corporation’s ability to market certain of its products and, in turn, could harm its business and results from operations.

Stress in the global financial system may adversely affect the Corporation’s operations in ways that may be hard to predict or to defend against

Recent events have demonstrated that businesses and industries throughout the world are very tightly connected to each other. Thus, events seemingly unrelated to the Corporation, or to its industry, may adversely affect its finances or operations in ways that are hard to predict or defend against. For example, credit contraction in financial markets may hurt the Corporation’s ability to access credit when it is needed or rapid changes in foreign exchange rates may adversely affect financial results. Finally, a reduction in credit, combined with reduced economic activity, may adversely affect businesses and industries that collectively constitute a significant portion of the Corporation’s customer base. As a result, these customers may need to reduce their purchases of the Corporation’s products, or there may be greater difficulty in receiving payment for the products that these customers purchase from the Corporation. Any of these events, or any other events caused by turmoil in world financial markets, may have a material adverse effect on the business, operating results, and financial condition.

Insurance and Uninsured Risks

The Corporation’s business is subject to a number of risks and hazards including industrial accidents, labor disputes and changes in the regulatory environment. Such occurrences could result in damage to equipment, personal injury or death, monetary losses and possible legal liability. Although the Corporation maintains liability insurance in amounts which it considers adequate, the nature of these risks is such that liabilities might exceed policy limits, the liabilities and hazards might not be insurable, or the Corporation may elect not to insure against such liabilities due to high premium costs or other reasons, in which event the Corporation could incur significant costs that could have a materially adverse effect upon its financial position.

Conflicts of Interest

Certain directors and officers of the Corporation are or may become associated with other companies in the same or related industries which may give rise to conflicts of interest. Directors who have a material interest in any person who is a party to a material contract or a proposed material contract with the Corporation are required, subject to certain exceptions, to disclose that interest and generally abstain from voting on any resolution to approve the contract. In addition, the directors and the officers are required to act honestly and in good faith with a view to the best interests of the Corporation. The directors and officers of the Corporation have either other full-time employment or other business or time restrictions placed on them and accordingly, the Corporation will not be the only business enterprise of these directors and officers.

Dividend Policy

The Corporation has not paid dividends in the past and has no plans to pay dividends for the foreseeable future. The future dividend policy of the Corporation will be determined by its directors.

Lack of Active Market

There can be no assurance that an active market for the Common Shares will continue and any increased demand to buy or sell the Common Shares can create volatility in price and volume.

33

Market Price of Common Shares

There can be no assurance that an active market for the Common Shares will be sustained. Securities of small and midcap companies have experienced substantial volatility in the past, often based on factors unrelated to the financial performance or prospects of the companies involved. These factors include global economic developments and market perceptions of the attractiveness of certain industries. The price per Common Share is also likely to be affected by change in the Corporation’s financial condition or results of operations as reflected in its quarterly filings. Other factors unrelated to the performance of the Corporation that may have an effect on the price of Common Shares include the following: the extent of analytical coverage available to subscribers concerning the business of the Corporation may be limited if investment banks with research capabilities do not follow the Corporation’s securities; lessening in trading volume and general market interest in the Corporation’s securities may affect a subscriber’s ability to trade significant numbers of Common Shares, the size of the Corporation’s public float may limit the ability of some institutions to invest in the Corporation’s securities; a substantial decline in the price of the Common Shares that persists for a significant period of time could cause the Corporation’s securities to be delisted from the exchange, further reducing market liquidity. If an active market for the Common Shares does not continue, the liquidity of a subscriber’s investment may be limited and the price of the Common Shares may decline. If such a market does not develop, subscribers may lose their entire investment in the Common Shares.

Political Regulatory Risks

Any changes in government policy may result in changes to laws affecting the sale of the Corporation’s products. This may affect the Corporation’s ability to ship product in the future. The possibility that future governments may adopt substantially different policies, may also effect the Corporation’s operations. Local governments in all countries the Corporation deals with issue end user certificates to purchase or receive live ammunition from the Corporation. It is the decision of these countries in the Middle East, the United States, Canada, Europe, and the Baltics whether or not they will take possession or purchase such munitions.

Dividends

The Corporation has not, since the date of its incorporation, declared or paid any dividends on its Common Shares and does not currently intend to pay dividends. Earnings, if any, will be retained to finance further growth and development of the business of the Corporation.

Legal proceedings

In November of 2013, a former officer filed a law suit against the Company in the Ontario Superior Court of Justice (Province of Ontario) seeking, among other things, $60,000 in damages for wrongful dismissal, damages of $35,000 on account of vacation pay and damages to be determined for out of pocket expenses, breach of contract, unjust enrichment and loss of business opportunity. During the quarter ended February 28, 2015, the Company and the former officer executed a settlement agreement at CAD $15,000.

Item 4. Controls and Procedures.

(a) SDI maintains a system of controls and procedures designed to ensure that information required to be disclosed in reports filed or submitted under the Securities Exchange Act of 1934, as amended (“1934 Act”), is recorded, processed, summarized and reported, within time periods specified in the SEC’s rules and forms and to ensure that information required to be disclosed by SDI in the reports that it files or submits under the 1934 Act, is accumulated and communicated to SDI’s management, including its Principal Executive Officer and Principal Financial Officer, as appropriate to allow timely decisions regarding required disclosure. As of August 31, 2015, SDI’s Principal Executive Officer and Principal Financial Officer evaluated the effectiveness of the design and operation of SDI’s disclosure controls and procedures. Based on that evaluation, SDI’s Principal Executive Officer and Principal Financial Officer concluded that SDI’s disclosure controls and procedures were not effective due to the following material weakness:

34

Inherent in any small business is the pervasive problem involving segregation of duties. Since SDI has a small accounting department, segregation of duties cannot be completely accomplished at this stage in its corporate lifecycle.

In order to correct the foregoing material weakness, we have taken and are taking the following remediation measures that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting:

Accordingly, SDI’s management has added compensating controls to reduce and minimize the risk of a material misstatement in SDI’s annual and interim financial statements.

(b) Changes in Internal Controls. There were no changes in SDI’s internal control over financial reporting during the quarter ended August 31, 2015 that materially affected, or are reasonably likely to materially affect, its internal control over financial reporting.

35

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

SECURITY DEVICES INTERNATIONAL, INC.

Date: October 15, 2015

Date: October 15, 2015

36