CIRRUS LOGIC, INC. - Annual Report: 2013 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

x    ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

For The Fiscal Year Ended March 30, 2013

¨    TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

For the Transition Period from                  to                 

Commission File Number 0-17795

CIRRUS LOGIC, INC.

(Exact name of registrant as specified in its charter)

800 W. 6^th Street, Austin, TX 78701

(Address of principal executive offices)

Registrant’s telephone number, including area code: (512) 851-4000

Securities registered pursuant to Section 12(b) of the Act:

None

Securities registered pursuant to Section 12(g) of the Act:

Common Stock, $0.001 Par Value

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    YES   þ        NO  ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    YES  ¨        NO  þ

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    YES  þ        NO  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    YES  þ        NO  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    YES  ¨        NO  þ

The aggregate market value of the registrant’s voting and non-voting common equity held by non-affiliates was $1,812,739,022 based upon the closing price reported on the NASDAQ Global Select Market as of September 28, 2012. Stock held by directors, officers and stockholders owning 5 percent or more of the outstanding common stock were excluded as they may be deemed affiliates. This determination of affiliate status is not a conclusive determination for any other purpose.

As of May 24, 2013, the number of outstanding shares of the registrant’s common stock, $0.001 par value, was 63,376,659.

DOCUMENTS INCORPORATED BY REFERENCE

Certain information contained in the registrant’s proxy statement for its annual meeting of stockholders to be held July 30, 2013 is incorporated by reference in Part II – Item 5. and Part III of this Annual Report on Form 10-K.

Table of Contents

CIRRUS LOGIC, INC.

FORM 10-K

For The Fiscal Year Ended March 30, 2013

INDEX

Page 2 of 69

Table of Contents

PART I

ITEM 1.  Business

Cirrus Logic, Inc. (“Cirrus Logic,” “We,” “Us,” “Our,” or the “Company”) develops high-precision, analog and mixed-signal integrated circuits (“ICs”) for a broad range of consumer and industrial markets. Building on our diverse analog mixed-signal patent portfolio, Cirrus Logic delivers highly optimized products for consumer and professional audio, automotive entertainment, and targeted industrial applications including energy control, energy measurement, light emitting diode (“LED”) lighting and energy exploration.

We were incorporated in California in 1984, became a public company in 1989 and were reincorporated in the State of Delaware in February 1999. Our primary facility housing engineering, sales and marketing, and administrative functions is located in Austin, Texas. We also serve customers from sales offices in the United States, Europe and Asia, including the People’s Republic of China, Hong Kong, South Korea, Japan, Singapore, Taiwan and the United Kingdom. Our common stock, which has been publicly traded since 1989, is listed on the NASDAQ Global Select Market under the symbol CRUS.

We maintain a Web site with the address www.cirrus.com. We are not including the information contained on our Web site as a part of, or incorporating it by reference into, this Annual Report on Form 10-K. We make available free of charge through our Web site our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K, and amendments to these reports, as soon as reasonably practicable after we electronically file such material with, or furnish such material to, the Securities and Exchange Commission (the “SEC”). To receive a free copy of this Form 10-K, please forward your written request to Cirrus Logic, Inc., Attn: Investor Relations, 800 W. 6^th Street, Austin, Texas 78701, or via email at Investor.Relations@cirrus.com. In addition, the SEC maintains a website at www.sec.gov that contains reports, proxy and information statements filed electronically with the SEC by Cirrus Logic.

Background of the Semiconductor Industry

In general, the semiconductor industry produces three types of products: analog, digital and mixed-signal. Analog semiconductors process a continuous range of signals that can represent functions such as temperature, speed, pressure and sound. Digital semiconductors process information represented by discrete values, for example, 0s and 1s. Mixed-signal semiconductors combine analog and digital circuits in a single product. The design of the analog component of a mixed-signal IC is particularly complex and difficult, and requires experienced engineers to optimize speed, power and resolution within standard manufacturing processes.

The convergence and sophistication of our customers’ products, such as portable audio applications, home entertainment and automotive audio devices, is made possible in part by advances in semiconductor technology. Semiconductor companies are attempting to differentiate their products by offering new features and functionality to customers, while at the same time shrinking product sizes, reducing power consumption, and lowering overall system costs.

Due to the extremely high costs involved in developing and operating a wafer fabrication facility, many semiconductor companies, including Cirrus, rely on third party foundries to manufacture their ICs. We believe that our fabless manufacturing model significantly reduces our capital requirements and allows us to focus our resources on the design, development, and marketing of our ICs.

Segments

We determine our operating segments in accordance with Financial Accounting Standards Board (“FASB”) guidelines. Our Chief Executive Officer (“CEO”) has been identified as the chief operating decision maker as defined by these guidelines.

The Company operates and tracks its results in one reportable segment, but reports revenue performance in two product lines, which currently are audio and energy. Our CEO receives and uses enterprise-wide financial information to assess financial performance and allocate resources, rather than detailed information at a product line level. Additionally, our product lines have similar characteristics and customers. They share operations

Page 3 of 69

Table of Contents

support functions such as sales, public relations, supply chain management, various research and development and engineering support, in addition to the general and administrative functions of human resources, legal, finance and information technology. Therefore, there is no discrete financial information maintained for these product lines. For fiscal years 2013, 2012, and 2011, audio product sales were $754.8 million, $350.7 million, and $264.8 million, respectively. For fiscal years 2013, 2012, and 2011, energy product sales were $55.0 million, $76.1 million, and $104.7 million, respectively.

See Note 18 - Segment Information, of the Notes to Consolidated Financial Statements contained in Item 8 for further details including sales and property, plant and equipment, net, by geographic locations.

Company Strategy

We target growing markets where we can showcase our expertise in analog and digital signal processing to solve challenging problems. Our approach has been to develop new custom and catalog components that embody our latest innovations, which we then use to engage with the leading customers in a particular market or application. We then focus on building a strong engineering relationship with the design teams at these customers and work to develop highly differentiated products that address their specific needs using our own intellectual property (“IP”), sometimes in combination with theirs. When we have been successful with this approach, one initial design win has expanded into many additional products. This strategy gives us the opportunity to increase our content per box with a customer over time through the addition of new features and the integration of other system components into our products.

Markets and Products

The following provides a detailed discussion regarding our audio and energy product lines:

Audio Products:  High-precision analog and mixed-signal components, as well as audio digital signal processor (“DSP”) products for consumer, professional and automotive entertainment markets.

Energy Products:  High-precision analog and mixed-signal components for energy-related applications, such as LED lighting, energy measurement, energy exploration and energy control systems.

AUDIO PRODUCTS

We are a recognized leader in analog and mixed-signal audio converter and audio DSP products that enable today’s new consumer, professional and automotive entertainment applications. Our broad portfolio of approximately 250 active proprietary audio products includes analog-to-digital converters (“ADCs”), digital-to-analog converters (“DACs”), “codecs”—chips that integrate ADCs and DACs into a single IC, digital interface ICs, volume controls, adaptive noise cancelling circuits (“ANC”) and amplifiers, as well as audio DSPs. Our products are used in a wide array of consumer applications, including portable media players, smartphones, tablet computers, laptops, audio/video receivers (“AVRs”) and Blu-ray Disc players, home theater systems, set-top boxes, gaming devices, digital camcorders and digital televisions. Applications for products within professional markets include digital mixing consoles, multi-track digital recorders and effects processors. Applications for products within automotive markets include amplifiers, satellite radio systems, telematics and multi-speaker car-audio systems.

ENERGY PRODUCTS

We provide high-precision analog and mixed-signal ICs for targeted energy control, energy measurement, LED lighting and energy exploration applications. We have approximately 450 active proprietary energy products which include LED driver ICs, power factor correction ICs, ADC, and DACs. Our products are used in a wide array of high-precision, energy-related applications including LED retrofit lamps, digital utility meters, power supplies and energy exploration.

Page 4 of 69

Table of Contents

Customers, Marketing, and Sales

We offer approximately 700 products worldwide through both direct and indirect sales channels. Our major customers are among the world’s leading electronics manufacturers. We target both large existing and emerging growth consumer electronic and energy markets that derive value from our expertise in advanced analog and mixed-signal design processing, systems-level integrated circuit engineering and embedded software development. We derive our sales both domestically and from a variety of locations across the world, including the People’s Republic of China, the European Union, Hong Kong, Japan, South Korea, Taiwan, and the United Kingdom. Our domestic sales force includes a network of regional direct sales offices located in California, Nevada, and Texas. International sales offices and staff are located in Germany, Hong Kong, Shanghai and Shenzhen in the People’s Republic of China, Singapore, South Korea, Taiwan, Japan and the United Kingdom. We supplement our direct sales force with external sales representatives and distributors. Our technical support staff is located in Texas. Our worldwide sales force provides geographically specific support to our customers and specialized selling of product lines with unique customer bases. See Note 18—Segment Information, of the Notes to Consolidated Financial Statements contained in Item 8 for further detail and for additional disclosure regarding sales and property, plant and equipment, net, by geographic locations.

Since the components we produce are largely proprietary and generally not available from second sources, we generally consider our end customer to be the entity specifying the use of our component in their design. These end customers may then purchase our products directly from us, from an external sales representative or distributor, or through a third party manufacturer contracted to produce their designs. For fiscal years 2013, 2012, and 2011, our ten largest end customers represented approximately 89 percent, 74 percent, and 62 percent, of our sales, respectively. For fiscal years 2013, 2012, and 2011, we had one end customer, Apple Inc., who purchased through multiple contract manufacturers and represented approximately 82 percent, 62 percent, and 47 percent, of the Company’s total sales, respectively. For fiscal years 2012, and 2011, we had one distributor, Avnet Inc., who represented 15 percent, and 24 percent, of our sales, respectively. No other customer or distributor represented more than 10 percent of net sales in fiscal years 2013, 2012, or 2011.

Manufacturing

As a fabless semiconductor company, we contract with third parties for wafer fabrication and our assembly and test operations. We use multiple wafer foundries, assembly sources and test houses in the production of our inventory. The Company owned a 54,000 square foot facility in Tucson, Arizona, which served as the assembly and test facility for the Apex Precision Power (“Apex”) product line prior to the Company selling the assets related to this entity in the fall of fiscal year 2013. Our outsourced manufacturing strategy allows us to concentrate on our design strengths, minimize fixed costs and capital expenditures while giving us access to advanced manufacturing facilities, and provide the flexibility to source multiple leading-edge technologies through strategic relationships. After wafer fabrication by the foundry, third-party assembly vendors package the wafer die. The finished products are then tested before shipment to our customers. While we do have some redundancy of fabrication processes by using multiple outside foundries, any interruption of supply by one or more of these foundries could materially impact us. As a result, we maintain some amount of business interruption insurance to help reduce the risk of wafer supply interruption, but we are not fully insured against such risk. Our supply chain management organization is responsible for the management of all aspects of the manufacturing, assembly, and testing of our products, including process and package development, test program development, and production testing of products in accordance with our ISO-certified quality management system.

Although our products are made from basic materials (principally silicon, metals and plastics), all of which are available from a number of suppliers, capacity at wafer foundries sometimes becomes constrained. The limited availability of certain materials may impact our suppliers’ ability to meet our demand needs or impact the price we are charged. The prices of certain other basic materials, such as metals, gases and chemicals used in the production of circuits can increase as demand grows for these basic commodities. In most cases, we do not procure these materials ourselves; nevertheless, we are reliant on such materials for producing our products because our outside foundry and package and test subcontractors must procure them. To help mitigate risks associated with constrained capacity, we use multiple foundries, assembly and test sources.

Page 5 of 69

Table of Contents

Patents, Licenses and Trademarks

We rely on patent, copyright, trademark, and trade secret laws to protect our intellectual property, products, and technology. As of March 30, 2013, we held approximately 988 granted U.S. patents, 136 U.S. pending patent applications and various corresponding international patents and applications. Our U.S. patents expire in calendar years 2013 through 2031. While our patents are an important element of our success, our business as a whole is not dependent on any one patent or group of patents. We do not anticipate any material effect on our business due to any patents expiring in 2013, and we continue to obtain new patents through our ongoing research and development.

We have maintained U.S. federal trademark registrations for CIRRUS LOGIC, CIRRUS, Cirrus Logic logo designs, and CRYSTAL. These U.S. registrations may be renewed as long as the marks continue to be used in interstate commerce. We have also filed or obtained foreign registration for these marks in other countries or jurisdictions where we conduct, or anticipate conducting, international business.

To complement our own research and development efforts, we have also licensed and expect to continue to license, a variety of intellectual property and technologies important to our business from third parties.

Research and Development

We concentrate our research and development efforts on the design and development of new products for each of our principal markets. We also fund certain advanced-process technology development, as well as other emerging product opportunities. Expenditures for research and development in fiscal years 2013, 2012, and 2011 were $114.1 million, $85.7 million, and $63.9 million, respectively. Our future success is highly dependent upon our ability to develop complex new products, transfer new products to volume production, introduce them into the marketplace in a timely fashion, and have them selected for design into products of systems manufacturers. Our future success may also depend on assisting our customers with integration of our components into their new products, including providing support from the concept stage through design, launch and production ramp.

Competition

Markets for our products are highly competitive and we expect that competition will continue to increase. Our ability to compete effectively and to expand our business will depend on our ability to continue to recruit key engineering talent, execute on new product developments, persuade customers to design-in these new products into their applications, and provide lower-cost versions of existing products. We compete with other semiconductor suppliers that offer standard semiconductors, application-specific standard product and fully customized ICs, including embedded software, chip and board-level products.

While no single company competes with us in all of our product lines, we face significant competition in all markets where our products are available. We expect to face additional competition from new entrants in our markets, which may include both large domestic and international IC manufacturers and smaller, emerging companies.

The principal competitive factors in our markets include: time to market; quality of hardware/software design and end-market systems expertise; price; product benefits that are characterized by performance, features, quality and compatibility with standards; access to advanced process and packaging technologies at competitive prices; and sales and technical support, which includes assisting our customers with integration of our components into their new products and providing support from the concept stage through design, launch and production ramp.

Product life cycles may vary greatly by product category. For example, many consumer electronic devices have shorter design-in cycles; therefore, our competitors have increasingly frequent opportunities to achieve design wins in next-generation systems. Conversely, this also provides us frequent opportunities to displace competitors in products that have previously not utilized our design. The industrial and automotive markets typically have longer life cycles, which provide continued revenue streams over longer periods of time.

Page 6 of 69

Table of Contents

Backlog

Sales are made primarily pursuant to short-term purchase orders for delivery of products. The quantity actually ordered by the customer, as well as the shipment schedules, are frequently revised, without significant penalty, to reflect changes in the customer’s needs. The majority of our backlog is typically requested for delivery within six months. In markets where the end system life cycles are relatively short, customers typically request delivery in six to ten weeks. We believe a backlog analysis at any given time gives little indication of our future business except on a short-term basis, principally within the next 60 days.

We utilize backlog as an indicator to assist us in production planning. However, backlog is influenced by several factors including market demand, pricing, and customer order patterns in reaction to product lead times. Quantities actually purchased by customers, as well as prices, are subject to variations between booking and delivery because of changes in customer needs or industry conditions. As a result, we believe that our backlog at any given time is an incomplete indicator of future sales.

Employees

As of March 30, 2013, we had 652 full-time employees, a decrease of 15 employees, or 2 percent, over the end of fiscal year 2012. The decrease was primarily due to the restructuring during the 2013 fiscal year. Of our full-time employees, 62 percent were engaged in research and product development activities, 27 percent in sales, marketing, general and administrative activities, and 11 percent in manufacturing-related activities. Our future success depends, in part, on our ability to continue to attract, retain and motivate highly qualified technical, marketing, engineering, and administrative personnel.

We have never had a work stoppage and none of our employees are represented by collective bargaining agreements. We consider our employee relations to be good.

Forward—Looking Statements

This Annual Report on Form 10-K and certain information incorporated herein by reference contain forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, Section 27A of the Securities the Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. All statements included or incorporated by reference in this Annual Report on Form 10-K, other than statements that are purely historical, are forward-looking statements. In some cases, forward-looking statements are identified by words such as “expect,” “anticipate,” “target,” “project,” “believe,” “goals,” “estimates,” and “intend.” Variations of these types of words and similar expressions are intended to identify these forward-looking statements. Any statements that refer to our plans, expectations, strategies or other characterizations of future events or circumstances are forward-looking statements. Readers are cautioned that these forward-looking statements are predictions and are subject to risks, uncertainties, and assumptions that are difficult to predict. Therefore, actual results may differ materially and adversely from those expressed in any forward-looking statements. Among the important factors that could cause actual results to differ materially from those indicated by our forward-looking statements are those discussed in Item 1A. Risk Factors and elsewhere in this report, as well as in the documents filed by us with the SEC, specifically the most recent reports on Form 10-Q and 8-K, each as it may be amended from time to time.

We caution you not to place undue reliance on these forward-looking statements, which speak only as of the date of this report, and we undertake no obligation to update this information to reflect events or circumstances after the filing of this report with the SEC, except as required by law. All forward-looking statements, expressed or implied, included in this Form 10-K and attributable to Cirrus Logic are expressly qualified in their entirety by this cautionary statement. This cautionary statement should also be considered in connection with any subsequent written or oral forward-looking statements that we may make or persons acting on our behalf may issue. We undertake no obligation to revise or update publicly any forward-looking statement for any reason.

Item 1A.  Risk Factors

Our business faces significant risks. The risk factors set forth below may not be the only risks that we face and there is a risk that we may have failed to identify all possible risk factors. Additional risks that we are not

Page 7 of 69

Table of Contents

aware of yet or that currently are not significant may adversely affect our business operations. You should read the following cautionary statements in conjunction with the factors discussed elsewhere in this and other Cirrus Logic filings with the SEC. These cautionary statements are intended to highlight certain factors that may affect the financial condition and results of operations of Cirrus Logic and are not meant to be an exhaustive discussion of risks that apply to companies such as ours.

We depend on a limited number of customers and distributors for a substantial portion of our sales, and the loss of, or a significant reduction in orders from, or pricing on products sold to, any key customer or distributor could significantly reduce our sales and our profitability.

While we generate sales from a broad base of customers worldwide, the loss of any of our key customers, or a significant reduction in sales or selling prices to any key customer, or reductions in selling prices made to retain key customer relationships, would significantly reduce our revenue, margins and earnings and adversely affect our business. For the twelve month periods ending March 30, 2013 and March 31, 2012, our ten largest end customers represented approximately 89 percent and 74 percent of our sales, respectively. For the twelve month periods ending March 30, 2013 and March 31, 2012, we had one end customer, Apple Inc., who purchased through multiple contract manufacturers and represented approximately 82 percent and 62 percent of the Company’s total sales, respectively. For the twelve month period ending March 31, 2012, we had one distributor, Avnet Inc., who represented 15 percent of our sales.

We may not be able to maintain or increase sales to certain of our key customers for a variety of reasons, including the following:

In addition, our dependence on a limited number of key customers may make it easier for key customers to pressure us to reduce the prices of the products we sell to them. We have experienced pricing pressure from certain key customers and we expect that the average selling prices for certain of our products will decline, reducing our revenue, our margins and our earnings.

Our key customer relationships often require us to develop new products that may involve significant technological challenges. Our customers frequently place considerable pressure on us to meet their tight development schedules. In addition, we may from time to time enter into customer agreements providing for exclusivity periods during which we may only sell specified products or technology to that customer. Accordingly, we may have to devote a substantial amount of resources to strategic relationships, which could detract from or delay our completion of other important development projects or the development of next generation products and technologies.

Our products are complex and could contain defects, which could result in material costs to us.

Product development in the markets we serve is becoming more focused on the integration of multiple functions on individual devices. There is a general trend towards increasingly complex products. The greater integration of functions and complexity of operations of our products increases the risk that we or our customers

Page 8 of 69

Table of Contents

or end users could discover latent defects or subtle faults after volumes of product have been shipped. This could result in material costs to us, including, but not limited to:

In addition, any defects or other problems with our products could result in financial losses or other damages to our customers who could seek damages from us for their losses. A product liability or warranty claim brought against us, even if unsuccessful, would likely be time consuming and costly to defend. In particular, the sale of systems and components that are incorporated into certain applications for the automotive industry involves a high degree of risk that such claims may be made.

Due to the complex nature of our products, quality and reliability issues may arise after significant volumes of a product have shipped. This could result in damage to our reputation as a high quality supplier; a material recall or significant product warranty costs; a delay in recognition of revenue; loss of customers and market share; lower manufacturing yields; or a diversion of our engineering personnel from our product development efforts.

While we believe that we are reasonably insured against some of these risks and that we have attempted to contractually limit our financial exposure with many of our customers, a warranty or product liability claim against us in excess of our available insurance coverage and established reserves, or a requirement that we participate in a customer product recall, would have adverse effects (that could be material) on our business, results of operations, and financial condition.

We have entered into joint development agreements, custom product arrangements, and strategic relationships with some of our largest customers. These arrangements subject us to a number of risks, and any failure to execute on any of these arrangements could have a material adverse effect on our business, results of operations, and financial condition.

We have entered into joint development, product collaboration and technology licensing arrangements with some of our largest customers, and we expect to enter into new strategic arrangements of these kinds from time to time in the future. Such arrangements can magnify several risks for us, including loss of control over the development and development timeline of jointly developed products, risks associated with the ownership of the intellectual property that is developed pursuant to those arrangements, and increased risk that our joint development activities may result in products that are not commercially successful or that are not available in a timely fashion. In addition, any third party with whom we enter into a joint development, product collaboration or technology licensing arrangement may fail to commit sufficient resources to the project, change its policies or priorities or abandon or fail to perform its obligations related to the collaboration. In addition, we may from time to time enter into customer product arrangements that provide for exclusivity periods during which we may only sell specified products or technologies to that particular customer. Any failure to timely develop commercially successful products through our joint development activities as a result of any of these and other challenges could have a material adverse effect on our business, results of operations, and financial condition.

Page 9 of 69

Table of Contents

We are subject to risks relating to product concentration.

We derive a substantial portion of our revenues from a limited number of products, and we expect these products to represent a large percentage of our revenues in the near term. Customer acceptance of these products is critical to our future success. Our business, operating results, financial condition and cash flows could therefore be adversely affected by:

Our lack of diversification in our revenue and customer base increases the risk of an investment in our company, and our consolidated financial condition, results of operations, and stock price may deteriorate if we fail to diversify.

Although we continue to invest in and investigate opportunities to diversify our revenue and customer base, our sales, marketing, and development efforts have historically been focused on a limited number of customers and opportunities. Larger companies have the ability to manage their risk by product, market, and customer diversification. However, we lack diversification, in terms of both the nature and scope of our business, which enhances our risk profile. If we cannot diversify our customer and revenue opportunities, our financial condition and results of operations could deteriorate.

In general, our customers may cancel or reschedule orders on short notice without incurring significant penalties; therefore, our sales and operating results in any quarter are difficult to forecast.

In general, we rely on customers issuing purchase orders to buy our products rather than long-term supply contracts. Customers may cancel or reschedule orders on short notice without incurring significant penalties. Therefore, cancellations, reductions, or delays of orders from any significant customer could have a material adverse effect on our business, financial condition, and results of operations.

In addition, a significant portion of our sales and earnings in any quarter depends upon customer orders for our products that we receive and fulfill in that quarter. Because our expense levels are based in part on our expectations as to future revenue and to a large extent are fixed in the short term, we likely will be unable to adjust spending on a timely basis to compensate for any unexpected shortfall in sales or reductions in average selling prices. Accordingly, any significant shortfall of sales in relation to our expectations could hurt our operating results.

Our sales could be materially impacted by the failure of other component suppliers to deliver required parts needed in the final assembly of our customers’ end products.

The products we supply our customers are typically a portion of the many components provided from multiple suppliers in order to complete the final assembly of an end product. If one or more of these other component suppliers are unable to deliver their required component(s) in order for the final end product to be assembled, our customers may delay, or ultimately cancel, their orders from us.

Page 10 of 69

Table of Contents

Strong competition in the semiconductor market may harm our business.

The IC industry is intensely competitive and is frequently characterized by rapid technological change, price erosion, technological obsolescence, and a push towards IC component integration. Because of shortened product life cycles and even shorter design-in cycles in a number of the markets that we serve, our competitors have increasingly frequent opportunities to achieve design wins in next-generation systems. In the event that competitors succeed in supplanting our products, our market share may not be sustainable and our net sales, gross margin and operating results would be adversely affected. Additionally, further component integration could eliminate the need for our products.

We compete in a number of fragmented markets. Our principal competitors in these markets include AKM Semiconductor Inc., Analog Devices Inc., Austriamicrosystems AG, Dialog Semiconductor, Freescale Semiconductor Inc., Integrated Device Technology Inc., iWatt Inc., Infineon Technologies AG, Linear Technologies Corporation, Marvell Technology Group, Ltd., Maxim Integrated Products Inc., NXP Semiconductors N.V., ON Semiconductor Corporation, Power Integrations Inc., Realtek Semiconductor Corporation, ST Microelectronics N.V., Texas Instruments, Inc., and Wolfson Microelectronics plc. Many of these competitors have greater financial, engineering, manufacturing, marketing, technical, distribution, and other resources; broader product lines; broader intellectual property portfolios; and longer relationships with customers. We also expect intensified competition from emerging companies and from customers who develop their own IC products. In addition, some of our current and future competitors maintain their own fabrication facilities, which could benefit them in connection with cost, capacity, and technical issues.

Increased competition could adversely affect our business. We cannot provide assurances that we will be able to compete successfully in the future or that competitive pressures will not adversely affect our financial condition and results of operations. Competitive pressures could reduce market acceptance of our products and result in price reductions and increases in expenses that could adversely affect our business and our financial condition. In particular, we have seen increased pricing pressures in the portable audio market, which will likely impact revenues and gross margins in the future.

We are dependent on third-party manufacturing and supply relationships for the majority of our products. Our reliance on third-party foundries and suppliers involves certain risks that may result in increased costs, delays in meeting our customers’ demand, and loss of revenue.

We do not own or operate a semiconductor fabrication facility and do not have the resources to manufacture the majority of our products internally. We depend upon third parties to manufacture, assemble, package and test the majority of our products. As a result, we are subject to risks associated with these third parties, including:

Our outside foundries and assembly and test suppliers generally manufacture our products on a purchase order basis, and we have few long-term supply arrangements with these suppliers. Therefore, our third-party manufacturers and suppliers are not obligated to supply us with products for any specific period of time, quantity, or price, except as may be provided in any particular purchase order or in relation to an existing supply agreement. A manufacturing or supply disruption experienced by one or more of our outside suppliers or a disruption of our relationship with an outside foundry could negatively impact the production of certain of our products for a substantial period of time.

Page 11 of 69

Table of Contents

In addition, difficulties associated with adapting our technology and product design to the proprietary process technology and design rules of outside foundries can lead to reduced yields of our products. Since low yields may result from either design or process technology failures, yield problems may not be effectively determined or resolved until an actual product exists that can be analyzed and tested to identify process sensitivities relating to the design rules that are used. As a result, yield problems may not be identified until well into the production process, and resolution of yield problems may require cooperation between our manufacturer and us. This risk could be compounded by the offshore location of certain of our manufacturers, increasing the effort and time required to identify, communicate and resolve manufacturing yield problems. Manufacturing defects that we do not discover during the manufacturing or testing process may lead to costly product recalls. These risks may lead to increased costs or delayed product delivery, which would harm our profitability and customer relationships.

In some cases, our requirements may represent a small portion of the total production of the third-party suppliers. As a result, we are subject to the risk that a producer will cease production of an older or lower-volume process that it uses to produce our parts. We cannot assure you that our external foundries will continue to devote resources to the production of parts for our products or continue to advance the process design technologies on which the manufacturing of our products are based. Each of these events could increase our costs, lower our gross margin, and cause us to hold more inventories, or materially impact our ability to deliver our products on time.

Because we depend on subcontractors internationally to perform key manufacturing functions for us, we are subject to political, economic, and natural disaster risks that could disrupt the fabrication, assembly, packaging, or testing of our products.

We depend on third-party subcontractors, primarily in Asia, for the fabrication, assembly, packaging, and testing of most of our products. International operations may be subject to a variety of risks, including political instability, global health conditions, currency controls, exchange rate fluctuations, changes in import/export regulations, tariff and freight rates, as well as the risks of natural disasters such as earthquakes, tsunamis, and floods. Although we seek to reduce our dependence on any one subcontractor, this concentration of subcontractors and manufacturing operations in Asia subjects us to the risks of conducting business internationally, including associated political and economic conditions. If we experience manufacturing problems at a particular location, or a supplier is unable to continue operating due to financial difficulties, natural disasters, or other reasons, we would be required to transfer manufacturing to a backup supplier. Converting or transferring manufacturing from a primary supplier to a backup facility could be expensive and time consuming. As a result, delays in our production or shipping by the parties to whom we outsource these functions could reduce our sales, damage our customer relationships, and damage our reputation in the marketplace, any of which could harm our business, results of operations, and financial condition.

Our products may be subject to average selling prices that decline over time. If we are unable to maintain average selling prices for existing products, increase our volumes, introduce new or enhanced products with higher selling prices, or reduce our costs, our business and operating results could be harmed.

Historically in the semiconductor industry, average selling prices of products have decreased over time. Moreover, our dependence on a limited number of key customers may make it easier for key customers to pressure us to reduce the prices of the products we sell to them. If the average selling price of any of our products decline and we are unable to increase our unit volumes, introduce new or enhanced products with higher margins, and/or reduce manufacturing costs to offset anticipated decreases in the prices of our existing products, our operating results may be adversely affected. In addition, because of procurement lead times, we are limited in our ability to reduce total costs quickly in response to any reductions in prices or sales shortfalls. Because of these factors, we may experience material adverse fluctuations in our future operating results on a quarterly or annual basis.

Page 12 of 69

Table of Contents

We may experience difficulties transitioning to advanced manufacturing process technologies, which could materially adversely affect our results.

Our future success depends in part on our ability to transition our current development and production efforts to advanced manufacturing process technologies on circuit geometries of 55 nano-meter and smaller. To the extent that we do not timely transition to smaller geometries, experience difficulties in shifting to smaller geometries, or have significant quality or reliability issues at these smaller geometries, our results could be materially adversely affected.

Costs related to product defects and errata may harm our results of operations and business.

Costs associated with unexpected product defects and errata (deviations from published specifications) due to, for example, unanticipated problems in our design and manufacturing processes, could include:

These costs could be substantial and may increase our expenses and lower our margins and profitability. In addition, our reputation with our customers or users of our products could be damaged as a result of such product defects and errata, and the demand for our products could be reduced. The announcement of product defects and/or errata could cause customers to purchase products from our competitors as a result of anticipated shortages of our components or for other reasons. These factors could harm our financial results and the prospects for our business.

As we carry only limited insurance coverage, any incurred liability resulting from uncovered claims could adversely affect our financial condition and results of operations.

Our insurance policies may not be adequate to fully offset losses from covered incidents, and we do not have coverage for certain losses. For example, there is limited coverage available with respect to the services provided by our third party foundries and assembly and test subcontractors. Although we believe that our existing insurance coverage is consistent with common practices of companies in our industry, our insurance coverage may be inadequate to protect us against product recalls, natural disasters, and other unforeseen catastrophes that could adversely affect our financial condition and results of operations.

Our failure to develop and ramp new products into production in a timely manner could harm our operating results.

Our success depends upon our ability to develop new products for new and existing customers, and to introduce these products in a timely and cost-effective manner. New product introductions involve significant investment of resources and potential risks. Delays in new product introductions or less-than-anticipated market acceptance of our new products are possible and would have an adverse effect on our sales and earnings. The development of new products is highly complex and, from time-to-time, we have experienced delays in developing and introducing these new products. Successful product development and introduction depend on a number of factors including, but not limited to:

Page 13 of 69

Table of Contents

Both sales and/or margins may be materially affected if new product introductions are delayed, or if our products are not designed into successive generations of new or existing customers’ products. Our failure to develop and introduce new products successfully could harm our business and operating results.

In addition, difficulties associated with adapting our technology and product design to the proprietary process technology and design rules of outside foundries can lead to reduced yields of our products. Since low yields may result from either design or process technology failures, yield problems may not be effectively determined or resolved until an actual product exists that can be analyzed and tested to identify process sensitivities relating to the design rules that are used. As a result, yield problems may not be identified until well into the production process, and resolution of yield problems may require cooperation between our manufacturer and us. This risk could be compounded by the offshore location of certain of our manufacturers, increasing the effort and time required to identify, communicate and resolve manufacturing yield problems. Manufacturing defects that we do not discover during the manufacturing or testing process may lead to costly product recalls. These risks may lead to increased costs or delayed product delivery, which would harm our profitability and customer relationships.

Shifts in industry-wide capacity and our practice of ordering and purchasing our products based on sales forecasts may result in significant fluctuations in inventory and our quarterly and annual operating results.

We rely on independent foundries and assembly and test houses to manufacture our products. Our reliance on these third party suppliers involves certain risks and uncertainties. For example, shifts in industry-wide capacity from shortages to oversupply, or from oversupply to shortages, may result in significant fluctuations in our quarterly and annual operating results. In addition, we may order wafers and build inventory in advance of receiving purchase orders from our customers. Because our industry is highly cyclical and is subject to significant downturns resulting from excess capacity, overproduction, reduced demand, order cancellations, or technological obsolescence, there is a risk that we will forecast inaccurately and produce excess inventories of particular products. In addition, if we experience supply constraints or manufacturing problems at a particular supplier, we could be required to switch suppliers or qualify additional suppliers. Switching and/or qualifying additional suppliers could be an expensive process and take as long as six to twelve months to complete, which could result in material adverse fluctuations to our operating results.

We generally order our products through non-cancelable purchase orders from third-party foundries based on our sales forecasts, and our customers can generally cancel or reschedule orders they place with us without significant penalties. If we do not receive orders as anticipated by our forecasts, or our customers cancel orders that are placed, we may experience increased inventory levels.

Due to the product manufacturing cycle characteristic of IC manufacturing and the inherent imprecision in the accuracy of our customers’ forecasts, product inventories may not always correspond to product demand, leading to shortages or surpluses of certain products. As a result of such inventory imbalances, future inventory write-downs and charges to gross margin may occur due to lower of cost or market accounting, excess inventory, and inventory obsolescence.

We have historically experienced fluctuations in our operating results and expect these fluctuations to continue in future periods.

Our quarterly and annual operating results are affected by a wide variety of factors that could materially and adversely affect our net sales, gross margin, and operating results. If our operating results fall below expectations of market analysts or investors, the market price of our common stock could decrease significantly. We are subject to business cycles and it is difficult to predict the timing, length, or volatility of these cycles. These business cycles may create pressure on our sales, gross margin, and/or operating results.

Page 14 of 69

Table of Contents

Factors that could cause fluctuations and materially and adversely affect our net sales, gross margin and/or operating results include, but are not limited to:

We have significant international sales, and risks associated with these sales could harm our operating results.

Export sales, principally to Asia, include sales to U.S-based customers with overseas manufacturing plants or manufacturing sub-contractors. These export sales represented 94 percent, 88 percent, and 82 percent, of our net sales in fiscal years 2013, 2012, and 2011, respectively. We expect export sales to continue to represent a significant portion of product sales. This reliance on international sales subjects us to the risks of conducting business internationally, including risks associated with political and economic instability, global health conditions, currency controls, exchange rate fluctuations and changes in import/export regulations, tariff and freight rates, as well as the risks of natural disaster, especially in Asia. For example, the political or economic instability in a given region may have an adverse impact on the financial position of end users in the region, which could affect future orders and harm our results of operations. Our international sales operations involve a number of other risks including, but not limited to:

In addition, our competitive position may be affected by the exchange rate of the U.S. dollar against other currencies. Consequently, increases in the value of the dollar would increase the price in local currencies of our products in non-U.S. markets and make our products relatively more expensive. Alternatively, decreases in the value of the dollar will increase the relative cost of operations that are based overseas. We cannot provide assurances that regulatory, political and other factors will not adversely affect our operations in the future or require us to modify our current business practices.

Page 15 of 69

Table of Contents

Our international operations subject our business to additional political and economic risks that could have an adverse impact on our business.

In addition to international sales constituting a large portion of our net sales, we maintain international operations, sales, and technical support personnel. International expansion has required, and will continue to require, significant management attention and resources. There are risks inherent in expanding our presence into non-U.S. regions, including, but not limited to:

If we are unable to successfully manage the demands of our international operations, it may have a material adverse effect on our business, financial condition, or results of operations.

We may be adversely impacted by global economic conditions. As a result, our financial results and the market price of our common shares may decline.

Global economic conditions could make it difficult for our customers, our suppliers, and us to accurately forecast and plan future business activities, and could cause global businesses to defer or reduce spending on our products, or increase the costs of manufacturing our products. During challenging economic times our customers and distributors may face issues gaining timely access to sufficient credit, which could impact their ability to make timely payments to us. If that were to occur, we may be required to increase our allowance for doubtful accounts and our days sales outstanding would increase.

We cannot predict the timing, strength, or duration of any economic slowdown or subsequent economic recovery. If the economy or markets in which we operate were to deteriorate, our business, financial condition, and results of operations will likely be materially and/or adversely affected.

Our results may be affected by the fluctuation in sales in the consumer entertainment and smartphone markets.

Because we sell products primarily in the consumer entertainment and smartphone markets, we are likely to be affected by seasonality in the sales of our products and the cyclical nature of these markets. Further, a decline in consumer confidence and consumer spending relating to economic conditions, terrorist attacks, armed conflicts, oil prices, global health conditions, natural disasters, and/or the political stability of countries that we operate in or sell into could have a material adverse effect on our business.

Our failure to manage our distribution channel relationships could adversely affect our business.

The future of our business, as well as the future growth of our business, will depend in part on our ability to manage our relationships with current and future distributors and external sales representatives and to develop additional channels for the distribution and sale of our products. The inability to successfully manage these relationships could adversely affect our business.

We may be unable to protect our intellectual property rights.

Our success depends in part on our ability to obtain patents and to preserve our other intellectual property rights covering our products. We seek patent protection for those inventions and technologies for which we believe such protection is suitable and is likely to provide a competitive advantage to us. We also rely on trade

Page 16 of 69

Table of Contents

secrets, proprietary technology, non-disclosure and other contractual terms, and technical measures to protect our technology and manufacturing knowledge. We work actively to foster continuing technological innovation to maintain and protect our competitive position. We cannot provide assurances that steps taken by us to protect our intellectual property will be adequate, that our competitors will not independently develop or design around our patents, or that our intellectual property will not be misappropriated. In addition, the laws of some non-U.S. countries may not protect our intellectual property as well as the laws of the United States.

Any of these events could materially and adversely affect our business, operating results, or financial condition. Policing infringement of our technology is difficult, and litigation may be necessary in the future to enforce our intellectual property rights. Any such litigation could be expensive, take significant time, and divert management’s attention from other business concerns.

Potential intellectual property claims and litigation could subject us to significant liability for damages and could invalidate our proprietary rights.

The IC industry is characterized by frequent litigation regarding patent and other intellectual property rights. We may find it necessary to initiate a lawsuit to assert our patent or other intellectual property rights. These legal proceedings could be expensive, take significant time, and divert management’s attention from other business concerns. We cannot provide assurances that we will ultimately be successful in any lawsuit, nor can we provide assurances that any patent owned by us will not be invalidated, circumvented, or challenged. We cannot provide assurances that rights granted under our patents will provide competitive advantages to us, or that any of our pending or future patent applications will be issued with the scope of the claims sought by us, if at all.

As is typical in the IC industry, we and our customers have, from time to time, received and may in the future receive, communications from third parties asserting patents, mask work rights, or copyrights. In the event third parties were to make a valid intellectual property claim and a license was not available on commercially reasonable terms, our operating results could be harmed. Litigation, which could result in substantial cost to us and diversion of our management, technical and financial resources, may also be necessary to defend us against claimed infringement of the rights of others. An unfavorable outcome in any such suit could have an adverse effect on our future operations and/or liquidity.

System security risks, data protection breaches, cyber-attacks and other related cyber security issues could disrupt our internal operations, and any such disruption could increase our expenses, damage our reputation and adversely affect our stock price.

Experienced computer programmers and hackers may be able to penetrate our security controls and misappropriate or compromise our confidential information or that of third parties, create system disruptions or cause shutdowns. Computer programmers and hackers also may be able to develop and deploy viruses, worms and other malicious software programs that attack our websites, products or otherwise exploit any security vulnerabilities of our websites and products. The costs to us to eliminate or alleviate cyber or other security problems, bugs, viruses, worms, malicious software programs and security vulnerabilities could be significant, and our efforts to address these problems may not be successful and could result in interruptions, delays, cessation of service and loss of existing or potential customers that may impede our sales, manufacturing, distribution or other critical functions.

We manage and store various proprietary information and sensitive or confidential data relating to our business. In addition, we manage and store a significant amount of proprietary and sensitive confidential information from our customers. Any breach of our security measures or the accidental loss, inadvertent disclosure or unapproved dissemination of proprietary information or sensitive or confidential data about us or our customers, including the potential loss or disclosure of such information or data as a result of fraud, trickery or other forms of deception, could result in litigation and potential liability for us, damage our brand and reputation or otherwise harm our business.

Page 17 of 69

Table of Contents

If we fail to attract, hire and retain qualified personnel, we may not be able to develop, market, or sell our products or successfully manage our business.

Competition for highly qualified personnel in our industry is intense. The number of technology companies in the geographic areas in which we operate is greater than it has been historically and we expect competition for qualified personnel to intensify. There are only a limited number of individuals in the job market with the requisite skills. Our Human Resources organization focuses significant efforts on attracting and retaining individuals in key technology positions. The loss of the services of key personnel or our inability to hire new personnel with the requisite skills could restrict our ability to develop new products or enhance existing products in a timely manner, sell products to our customers, or manage our business effectively.

If we fail to effectively manage our hiring needs and successfully assimilate new talent, our ability to meet development schedules, productivity, employee morale and retention could be impacted, resulting in an adverse effect on our business and operating results.

We continue to experience rapid growth in hiring new employees. As we continue to grow, we must effectively integrate, develop and motivate a large number of new employees, while at the same time not losing key personnel. While managing those risks, we still must sustain the beneficial aspects of our award-winning corporate culture, which we believe fosters innovation, teamwork and mitigates voluntary turnover.

We intend to make substantial investments to expand our engineering, research and development organizations. The challenges of integrating a rapidly growing employee base into our corporate culture are exacerbated by the tight product development schedules for our key customers. Therefore, if we fail to effectively manage our hiring needs and successfully assimilate new talent, our ability to meet development schedules, productivity, employee morale and retention could be impacted, resulting in an adverse effect on our business and operating results.

We may acquire other companies or technologies, which may create additional risks associated with our ability to successfully integrate them into our business.

We continue to consider future acquisitions of other companies, or their technologies or products, to improve our market position, broaden our technological capabilities, and expand our product offerings. If we are able to acquire companies, products or technologies that would enhance our business, we could experience difficulties in integrating them. Integrating acquired businesses involves a number of risks, including, but not limited to:

If we are unable to successfully address any of these risks, our business could be harmed.

Page 18 of 69

Table of Contents

We are subject to the export control regulations of the U.S. Department of State and the Department of Commerce. A violation of these export control regulations could have a material adverse effect on our business or our results of operations, cash flows, or financial position.

The nature of our international business subjects us to the export control regulations of the U.S. Department of State and the Department of Commerce. If these export control regulations are violated, it could result in monetary penalties and denial of export privileges. The U.S. government is very strict with respect to compliance and has served notice generally that failure to comply with these regulations may subject violators to fines and/or imprisonment. Although we are not aware of any material violation of any export control regulations, a failure to comply with any of the above mentioned regulations could have a material adverse effect on our business.

Our financial results may be adversely affected by changes in the valuation allowance on our deferred tax assets.

The Company has a significant amount of deferred tax assets. Our ability to recognize these deferred tax assets is dependent upon our ability to determine whether it is more likely than not that we will be able to realize, or actually use, these deferred tax assets. That determination depends primarily on our ability to generate future U.S. taxable income. Our judgments regarding future profitability may change due to future market conditions, changes in U.S. or international tax laws and other factors. These changes, if any, may require possible material adjustments to the net deferred tax asset and an accompanying reduction or increase in net income in the period in which such determinations are made.

Our stock price has been and is likely to continue to be volatile.

The market price of our common stock fluctuates significantly. This fluctuation has been or may be the result of numerous factors, including, but not limited to:

Page 19 of 69

Table of Contents

We have provisions in our Certificate of Incorporation and Bylaws, and are subject to certain provisions of Delaware law, which could prevent, delay or impede a change of control of our company. These provisions could affect the market price of our stock.

Certain provisions of Delaware law and of our Certificate of Incorporation and Bylaws could make it more difficult for a third party to acquire us, even if our stockholders support the acquisition. These provisions include, but are not limited to:

We are also subject to the anti-takeover laws of Delaware that may prevent, delay or impede a third party from acquiring or merging with us, which may adversely affect the market price of our common stock.

We are subject to the risks of owning real property.

We currently own our U.S. headquarters in Austin, Texas. The ownership of our U.S. headquarters subjects us to the risks of owning real property, which may include:

ITEM 1B.  Unresolved Staff Comments

None.

ITEM 2.  Properties

As of May 1, 2013, our principal facilities are located in Austin, Texas. In July 2012, we relocated the Company’s corporate headquarters into a new facility, which we own, and consists of approximately 135,000 square feet of office space and is primarily occupied by research and development personnel and testing equipment. In addition, the Company has purchased surrounding properties that consist of approximately 32,000 square feet of space, of which 7,000 square feet is subleased through November 2014. We expect to staff these facilities with a mixture of administrative personnel, research and development personnel, and testing equipment once the current subleases expire and renovations are complete.

Additionally, we have various leased facilities in Austin, TX, consisting of approximately 96,000 square feet. This includes approximately 59,000 square feet of leased space that houses a mixture of administrative personnel as well as research and development personnel. Our failure analysis and reliability facilities occupy the remaining 37,000 square feet of leased space.

The Company closed operations in Tucson, Arizona during fiscal year 2013, which included 28,000 square feet of leased office space which was primarily occupied by engineering personnel. The term of this lease extends through May 2015.

Page 20 of 69

Table of Contents

Below is a detailed schedule that identifies our occupied leased and owned property locations as of May 1, 2013, with various lease terms through fiscal year 2015:

See Note 12 - Commitments and Contingencies of the Notes to Consolidated Financial Statements contained in Item 8 for further detail.

ITEM 3.  Legal Proceedings

From time to time, we are involved in legal proceedings concerning matters arising in connection with the conduct of our business activities. We regularly evaluate the status of legal proceedings in which we are involved, to assess whether a loss is probable or there is a reasonable possibility that a loss or additional loss may have been incurred and determine if accruals are appropriate. We further evaluate each legal proceeding to assess whether an estimate of possible loss or range of loss can be made, if accruals are not appropriate. We intend to vigorously defend ourselves against the allegations made in the legal cases described below.

On June 4, 2012, U.S. Ethernet Innovations, LLC (the “Plaintiff”) filed suit against Cirrus Logic and two other defendants in the U.S. District Court, Eastern District of Texas. The Plaintiff alleges that Cirrus Logic infringed on four U.S. patents relating to Ethernet technology. In its complaint, the Plaintiff indicated that it is seeking unspecified monetary damages, including up to treble damages for willful infringement. We answered the complaint on June 29, 2012, denying the allegations of infringement and seeking a declaratory judgment that the patents in suit were invalid and not infringed. On September 21, 2012, the Plaintiff amended its complaint to allege that we infringed on a fifth patent related to similar technology. We answered the amended complaint on October 8, 2012, again denying the allegations of infringement and seeking a declaratory judgment that the patents in suit were invalid and not infringed.

On February 4, 2013, a purported shareholder filed a class action complaint in the United States District Court for the Southern District of New York against the Company and two of the Company’s executives (the “Securities Case”). Koplyay v. Cirrus Logic, Inc., et al. Civil Action No. 13-CV-0790. The complaint alleges that the defendants violated the federal securities laws by making materially false and misleading statements regarding our business results between July 31, 2012, and October 31, 2012, and seeks unspecified damages along with plaintiff’s costs and expenses, including attorneys’ fees. A second complaint was filed on April 13, 2013, by a different purported shareholder, in the same court, setting forth substantially the same allegations. On April 19, 2013, the court appointed the plaintiff and counsel in the first class action complaint as the lead plaintiff and lead counsel. The lead plaintiff filed an amended complaint on May 1, 2013, including substantially the same allegations as the original complaint.

On April 13, 2013, another purported shareholder filed a shareholder derivative complaint against several of our current officers and directors in the District Court of Travis County, Texas, 53^rd Judicial District (the “Derivative Case”). Graham, derivatively on behalf of Cirrus Logic, Inc. v. Rhode, et. al., Cause No. D-1-GN-13-001285. In this complaint, the plaintiff makes allegations similar to those presented in the Securities Case, but the plaintiff asserts various state law causes of action, including claims of breach of fiduciary duty and unjust enrichment. The Company is named solely as a nominal defendant against whom no recovery is sought.

Page 21 of 69

Table of Contents

ITEM 4.  Mine Safety Disclosures

Not applicable.

PART II

Our common stock is traded on the NASDAQ Global Select Market under the symbol CRUS. The following table shows, for the periods indicated, the high and low intra-day sales prices for our common stock.

As of May 24, 2013, there were approximately 622 holders of record of our common stock.

We have not paid cash dividends on our common stock and currently intend to continue a policy of retaining any earnings for reinvestment in our business.

The information under the caption “Equity Compensation Plan Information” in our 2013 Proxy Statement is incorporated herein by reference.

Page 22 of 69

Table of Contents

Stock Price Performance Graph

The following graph and table show a comparison of the five-year cumulative total stockholder return, calculated on a dividend reinvestment basis, for Cirrus Logic, the S&P 500 Composite Index (the “S&P 500”), and the Semiconductor Subgroup of the S&P Electronics Index (the “S&P Semiconductors Index”).

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN

Assumes Initial Investment of $100 on March 29, 2008

The information in this Form 10-K appearing under the heading “Stock Price Performance Graph” is being “furnished” pursuant to Item 201(e) of Regulation S-K under the Securities Act of 1933, as amended, and shall not be deemed to be “soliciting material” or “filed” with the Securities and Exchange Commission or subject to Regulation 14A or 14C, other than as provided in Item 201(e) of Regulation S-K, or to the liabilities of Section 18 of the Securities Exchange Act of 1934, as amended.

Page 23 of 69

Table of Contents

ITEM 6.  Selected Financial Data

The information contained below should be read along with Item 7 — Management’s Discussion and Analysis of Financial Condition and Results of Operations and Item 8 — Financial Statements and Supplementary Data (Amounts in thousands, except per share amounts).

ITEM 7.  Management’s Discussion and Analysis of Financial Condition and Results of Operations

Please read the following discussion in conjunction with our audited historical consolidated financial statements and notes thereto, which are included elsewhere in this Form 10-K. Management’s Discussion and Analysis of Financial Condition and Results of Operations contains statements that are forward-looking. These statements are based on current expectations and assumptions that are subject to risk, uncertainties and other factors. Actual results could differ materially because of the factors discussed in Part I, Item 1A. “Risk Factors” of this Form 10-K.

Critical Accounting Policies

Our discussion and analysis of the Company’s financial condition and results of operations are based upon the consolidated financial statements included in this report, which have been prepared in accordance with U. S. generally accepted accounting principles. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts. We evaluate the estimates on an on-going basis. We base these estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions and conditions.

We believe the following critical accounting policies involve significant judgments and estimates that are used in the preparation of the consolidated financial statements:

Page 24 of 69

Table of Contents

The calculation of our tax liabilities involves assessing uncertainties with respect to the application of complex tax rules and the potential for future adjustment of our uncertain tax positions by the Internal Revenue Service or other taxing jurisdiction. If our estimates of these taxes are greater or less than actual results, an additional tax benefit or charge will result. See Note 17 — Income Taxes of the Notes to Consolidated Financial Statements contained in Item 8 for additional details.

Further, the Company defers the associated cost of goods sold on our consolidated balance sheet, net within the deferred income caption. The Company routinely evaluates the products held by our distributors for impairment to the extent such products may be returned by the distributor within these limited rights and such products would be considered excess or obsolete if included within our own inventory. Products returned by distributors and subsequently scrapped have historically been immaterial to the Company.

Page 25 of 69

Table of Contents

Recently Issued Accounting Pronouncements

In July 2012, the FASB issued ASU No. 2012-02, Intangibles — Goodwill and Other (ASC Topic 350) — Testing Indefinite-Lived Intangible Assets for Impairment. With the amendments in this update, an entity has the option to first assess qualitative factors to determine whether it is more likely than not that indefinite-lived assets, other than goodwill, are impaired. If, after the assessment, an entity concludes it is not more likely than not that the asset is impaired, then the entity is not required to assess further. If an entity concludes otherwise, the fair value determination and quantitative impairment test is required, in accordance with Subtopic 350-30. The amendments in this ASU are effective for annual and interim impairment tests performed for fiscal years beginning after September 15, 2012, with early adoption permitted. The adoption of this ASU is not expected to have a material impact on our consolidated financial position, results of operations or cash flows.

In February 2013, the FASB issued ASU No. 2013-02, Comprehensive Income (ASC Topic 220) —Reporting of Amounts Reclassified Out of Accumulated Other Comprehensive Income. With the amendments in this update, an entity is required to “report the effect of significant reclassifications out of accumulated other comprehensive income on the respective line items in net income if the amount being reclassified is required under U.S. GAAP to be reclassified in its entirety to net income. For other amounts that are not required under U.S. GAAP to be reclassified in their entirety to net income in the same reporting period, an entity is required to cross-reference other disclosures required under U.S. GAAP that provide additional detail about those amounts.” The amendments in this ASU are effective prospectively for reporting periods beginning after December 15,

Page 26 of 69

Table of Contents

2012, with early adoption permitted. The adoption of this ASU is not expected to have a material impact on our consolidated financial position, results of operations or cash flows.

Overview

Cirrus Logic develops high-precision analog and mixed-signal ICs for a broad range of audio and energy markets. We track operating results in one reportable segment, but report revenue performance by product line, which currently are audio and energy. In fiscal year 2013, the Company announced that our Board of Directors authorized a share repurchase program of up to $200 million of the Company’s common stock, continued to target growing markets that we were focused on in previous years and developed new winning designs. The Company reported a revenue increase of 90% over the prior fiscal year and an increase in the investment in research and development of $28.4 million.

Fiscal Year 2013

Fiscal year 2013 was a year focused on ramping new custom products and introducing general market portable audio and energy products that we expect to drive revenue growth and customer diversification longer-term. The Company continued to target tier-one customers in growing markets who are able to differentiate their products with our innovative technology, highlighted by the fact that our top ten end customer concentration has increased to 89 percent of sales in the current fiscal year, from 74 percent in fiscal year 2012.

Fiscal year 2013 net sales of $809.8 million represented a 90 percent increase over fiscal year 2012 net sales of $426.8 million. Audio product line sales of $754.8 million in fiscal year 2013 represented a 115 percent increase over fiscal year 2012 sales of $350.7 million, attributable to higher sales of portable audio products. Energy product line sales of $55.0 million in fiscal year 2013 represented a 28 percent decrease from fiscal year 2012 sales of $76.1 million, which was attributable, primarily to the absence of revenue related to the products involved in the Tucson office asset sale, described in Note 7, coupled with decreased sales from our power meter components. Additionally, the restructuring discussed in Note 9 of the consolidated financial statements contributed to this decrease.

In fiscal year 2013, we experienced substantial growth in our revenue and operating profit, significantly expanded our footprint in portable audio, and continued our investments in new LED lighting products.

Overall, gross margin for fiscal year 2013 was 48.8 percent. Decreases in gross margin for fiscal year 2013 were primarily due to inventory write-downs, including scrapped inventory, and unfavorable product mix. The Company achieved net income of $136.6 million in fiscal year 2013, which included an income tax provision in the amount of $64.6 million. Additionally, the Company’s number of employees decreased slightly to 652 in fiscal year 2013, due to the restructuring discussed in Note 9, partially offset by an increase in new hires.

Fiscal Year 2012

Fiscal year 2012 net sales of $426.8 million represented a 15 percent increase over fiscal year 2011 net sales of $369.6 million. Audio product line sales of $350.7 million in fiscal year 2012 represented a 32 percent increase over fiscal year 2011 sales of $264.8 million and were primarily attributable to higher sales of portable audio products. Energy product line sales of $76.1 million in fiscal year 2012 represented a 27 percent decrease from fiscal year 2011 sales of $104.7 million, and were attributable to decreased sales across product lines, primarily in the seismic product line.

In fiscal year 2012, we launched our first LED controller within our energy product line and continued our strategy of targeting growing markets, where we can showcase our expertise in analog and digital signal processing to solve challenging problems.

Overall gross margin of 54.0 percent for fiscal year 2012 represented an approximate 14 percent increase in gross profit over prior years. The Company achieved net income of $88.0 million in fiscal year 2012, which included a benefit for income taxes in the amount of $8.0 million upon realizing net deferred tax assets. Additionally, the Company’s number of employees grew to 667 in the 2012 fiscal year, due to the increased hiring of engineering talent for existing projects.

Page 27 of 69

Table of Contents

Fiscal Year 2011

The Company completed a $150 million stock repurchase program in fiscal year 2011 and continued our strategy of targeting and developing relationships with Tier 1 customers in growing markets, such as portable audio products, including smartphones; automobile audio amplifiers; and energy measurement and energy control. We built on our diverse analog and signal-processing patent portfolio by delivering highly optimized products for a variety of audio and energy-related applications. We dedicated substantial resources and investments towards portable audio products, but also invested in energy-related applications.

Fiscal year 2011 net sales of $369.6 million represented a 67 percent increase over fiscal year 2010 net sales of $221.0 million. Audio product line sales of $264.8 million in fiscal year 2011 represented a 72 percent increase over fiscal year 2010 sales of $153.7 million, and were primarily attributable to higher sales of portable audio and surround codec products. Energy product line sales of $104.7 million in fiscal year 2011 represented a 56 percent increase over fiscal year 2010 sales of $67.3 million, and were primarily attributable to higher sales of seismic, power meter, and power amplification products.

Overall gross margin of 54.7 percent for fiscal year 2011 reflected an increase from fiscal year 2010 margin of 53.7 percent due to enhanced supply chain management and increased sales of higher margin seismic, power meter, and power amplification products.

With expanding design win opportunities in both our audio and energy product lines, the Company continued to hire engineering talent, which resulted in an increase of 64 research and development employees, or 26 percent, as compared to the end of fiscal year 2010.

The Company achieved net income of $203.5 million in fiscal year 2011, which included a benefit for income taxes in the amount of $119.3 million as a result of the realization of an additional $120.0 million of net deferred tax assets. Finally, the Company’s cash, cash equivalents and investments balances as of March 26, 2011, of $215.1 million reflects an increase of $73.5 million, or 52 percent, over the ending balances from the prior fiscal year.

Results of Operations

The following table summarizes the results of our operations for each of the past three fiscal years as a percentage of net sales. All percentage amounts were calculated using the underlying data, in thousands:

Page 28 of 69

Table of Contents

Net Sales

We report sales in two product categories: audio products and energy products. Our sales by product line are as follows (in thousands):

Net sales for fiscal year 2013 increased 90 percent, to $809.8 million from $426.8 million in fiscal year 2012. The increase in net sales reflects a $404.0 million increase in audio product sales, partially offset by a $21.1 million decrease in energy product sales. The audio products group experienced growth primarily from the sales of portable audio products, while the decline in energy product group sales was attributable primarily to the absence of revenue related to the products involved in the Tucson office asset sale, described in Note 7, coupled with decreased sales from our power meter components.

Net sales for fiscal year 2012 increased 15 percent, to $426.8 million from $369.6 million in fiscal year 2011. The increase in net sales reflects an $85.9 million increase in audio product sales, offset by a $28.6 million decrease in energy product sales. The audio products group experienced growth primarily from the sales of portable products, while the decline in energy product group sales was attributable to decreased sales across product lines, primarily in the seismic product line.

Export sales, principally to Asia, including sales to U.S.-based customers that manufacture products at plants overseas, were approximately $764.9 million in fiscal year 2013, $376.6 million in fiscal year 2012, and $302.7 million in fiscal year 2011. Export sales to customers located in Asia were 91 percent, 79 percent, and 70 percent of net sales in fiscal years 2013, 2012, and 2011, respectively. All other export sales represented 3 percent, 9 percent, and 12 percent of net sales in fiscal years 2013, 2012, and 2011, respectively.

Our sales are denominated primarily in U.S. dollars. During fiscal years 2013, 2012, and 2011, we did not enter into any foreign currency hedging contracts.

Gross Margin

Overall gross margin of 48.8 percent for fiscal year 2013 reflects a decrease from fiscal year 2012 gross margin of 54.0 percent, primarily due to inventory write-downs in the 2013 fiscal year and unfavorable product mix. Fiscal year 2013 sales of product written down in prior periods contributed less than $0.1 million to gross margin compared to approximately $1.8 million, or 0.4 percent, in fiscal year 2012. In total, excess and obsolete inventory charges, including scrapped inventory, increased by $25.5 million from fiscal year 2012 and resulted in a decrease of gross margin of 3.1 percent. The $25.5 million increase in excess and obsolete inventory charges was primarily attributable to a charge due to a decreased customer forecast for orders of a high volume product.

Overall gross margin of 54.0 percent for fiscal year 2012 reflects a decrease from fiscal year 2011 gross margin of 54.7 percent, primarily due to energy product line decreases, and in particular, the decreased sales of seismic products. This decrease was offset by a 3 percent increase in margins in the audio product lines, primarily portable products. Fiscal year 2012 sales of product written down in prior periods contributed approximately $1.8 million, or 0.4 percent, compared to approximately $1.5 million, or 0.4 percent, in fiscal year 2011. In total, excess and obsolete inventory charges, including scrapped inventory, decreased by $5.2 million from fiscal year 2011 and resulted in an increase of gross margin of 1.2 percent. The $5.2 million decrease in excess and obsolete inventory charges was primarily attributable to a charge of approximately $4.2 million in the fourth quarter of fiscal year 2011. Additionally, in fiscal year 2012, gross margin was negatively affected 0.5 percent as a result of a production issue.

Page 29 of 69

Table of Contents

Research and Development Expenses

Fiscal year 2013 research and development expenses of $114.1 million reflect an increase of $28.4 million, or 33 percent, from fiscal year 2012. The variance was primarily due to a 13 percent increase in research and development headcount and associated salary expenses as well as increased product development costs. Also, in the 2013 fiscal year, depreciation increased as well as expenses related to investments in more CAD software.

Fiscal year 2012 research and development expenses of $85.7 million reflect an increase of $21.8 million, or 34 percent, from fiscal year 2011. The variance was primarily due to an 18 percent increase in research and development headcount and associated salary and benefit expenses. Additionally, research and development expenses related to product development and maintenance increased in the current year, due primarily to an increase in CAD technology and an increased number of projects under development.

Selling, General and Administrative Expenses

Fiscal year 2013 selling, general and administrative expenses of $77.0 million reflect an increase of $11.8 million, or 18 percent, compared to fiscal year 2012. The $11.8 million increase was primarily attributable to an increase in employee-related expenses, including bonuses and stock-based compensation, as well as increased external professional services, despite a decrease in headcount of 14 percent.

Fiscal year 2012 selling, general and administrative expenses of $65.2 million reflect an increase of $6.5 million, or 11 percent, compared to fiscal year 2011. The $6.5 million increase was primarily attributable to an increase in salaries and benefits as a result of a 19 percent increase in headcount in the selling, general and administrative category. There were also increases in expenses related to maintenance and supplies, depreciation and professional expenses compared to fiscal year 2011.

Patent Agreement, Net

On July 13, 2010, we entered into a Patent Purchase Agreement for the sale of certain Company-owned patents. As a result of this agreement, on August 31, 2010, the Company received cash consideration of $4.0 million from the purchaser. The proceeds were recorded as a recovery of costs previously incurred and are reflected as a separate line item on the consolidated statement of comprehensive income in operating expenses under the caption “Patent agreement, net.”

Interest Income

Interest income in fiscal years 2013, 2012, and 2011, was $0.4 million, $0.5 million, and $0.9 million, respectively. The decreases in interest income in fiscal years 2013 and 2012, were attributable to lower yields on invested capital.

Expense (Benefit) for Income Taxes

We recorded income tax expense of $64.6 million in fiscal year 2013 on a pre-tax income of $201.2 million, yielding an effective tax provision rate of 32.1 percent. Our effective tax rate was lower than the U.S. statutory rate of 35 percent, primarily as a result of federal research and development credits that were recorded during the year due to the retroactive extension of the credit by the enactment of the American Taxpayer Relief Act of 2012 on January 2, 2013. Our effective tax rate was also lowered slightly by the release of $2.6 million of valuation allowance that had been placed on our federal capital loss carryforward.

We recorded an income tax benefit of $8.0 million in fiscal year 2012 on a pre-tax income of $80.0 million, yielding an effective tax benefit rate of 10 percent. Our effective tax rate was lower than the U.S. statutory rate of 35 percent, primarily as a result of the release of a portion of the valuation allowance on certain deferred tax assets that have not yet been utilized.

We recorded an income tax benefit of $119.3 million in fiscal year 2011 on a pre-tax income of $84.2 million, yielding an effective tax benefit rate of 142 percent. Our effective tax rate was lower than the U.S. statutory rate of 35 percent, primarily as a result of the release of a portion of the valuation allowance on certain deferred tax assets

Page 30 of 69

Table of Contents

that have not yet been utilized. The release of a portion of the valuation allowance generated a $120.0 million tax benefit and was based on an evaluation of the net U.S. deferred tax assets that we expected to be more likely than not to be utilized in future years as a result of projected net income.

We evaluate our ability to realize our deferred tax assets on a quarterly basis. The deferred tax assets that we have recognized result from a more likely than not assessment that these assets will be realized.

Outlook

Our long term goal is to achieve 20 percent operating profit as well as to achieve 15 percent average year over year revenue growth. Due to increased pricing pressures in the smartphone market, we expect our gross margins to be in the mid-40 percent range in the latter half of the upcoming calendar year. For the upcoming fiscal year, we expect our revenue to be impacted due to a decline in our average selling prices in certain audio products.

Liquidity and Capital Resources

In fiscal year 2013, our net cash provided by operating activities was $160.8 million. The positive cash flow from operating activities was predominantly due to the cash components of our net income, partially offset by a $76.1 million reduction in working capital, primarily due to an increase in inventory and accounts receivable as our business grew. In fiscal year 2012, our net cash provided by operating activities was $83.2 million. The positive cash flow from operating activities was predominantly due to the cash components of our net income, partially offset by a $16.8 million reduction in working capital. In fiscal year 2011, our net cash provided by operating activities was $86.9 million. The positive cash flow from operating activities was predominantly due to the cash components of our net income, which were partially offset by a $12.8 million reduction in working capital.

In fiscal year 2013, we used approximately $84.8 million in cash for investing activities, principally due to the net purchases of marketable securities of $51.5 million and $52.9 million in capital expenditures, partially offset by $22.2 million in proceeds from the sale of assets associated with the Company’s Apex business in Tucson, Arizona. In fiscal year 2012, we generated approximately $18.4 million in cash from investing activities, principally due to the net proceeds from the sale of marketable securities, partially offset by $42 million in capital expenditures and investments in technology. In fiscal year 2011, we used approximately $74.2 million in cash from investing activities, principally due to the net purchase of $52.7 million in marketable securities. In addition, during fiscal year 2011, we invested $20.1 million in property, equipment, and capitalized software, primarily attributable to the purchase of land for our new corporate headquarters in the amount of $10.8 million, coupled with $2.4 million in headquarters construction costs. During fiscal year 2011, we also incurred $1.5 million for investments in technology.

During fiscal years 2013, 2012, and 2011, we generated $12.0 million, $4.1 million, and $31.0 million, respectively, in cash from financing activities related to the receipt of cash from common stock issuances as a result of the exercises of employee stock options. In fiscal year 2013, the Company utilized approximately $86.1 million in cash to repurchase and retire portions of its outstanding common stock as part of the $200 million stock repurchase program announced in the third quarter of fiscal year 2013. In fiscal year 2012, the Company utilized approximately $76.8 million in cash to repurchase and retire portions of its outstanding common stock as part of the $80 million stock repurchase program that began in fiscal year 2011. In fiscal year 2011, we completed a $20 million stock repurchase program and started the $80 million stock repurchase program that was completed in fiscal year 2013.

On April 19, 2012, the Company entered into a credit agreement providing for a $100 million revolving credit facility with a $15 million letter of credit sublimit. The credit facility expired on April 19, 2013, and the Company chose not to renew the agreement. Through April 19, 2013, we had not drawn against the revolving line of credit. See “Revolving Credit Facility” below for additional details regarding this facility.

The Company completed construction of our new headquarters facility in Austin, Texas in the third quarter of fiscal year 2013. Through March 30, 2013, total facility construction costs and the costs related to furniture, fixtures, and equipment to fully move our headquarters employees into this new facility was approximately $58.3 million, which included $10.8 million in land acquisition costs. We have funded the costs related to this project with cash flows from operations. The Company intends to expand operations in the upcoming fiscal year

Page 31 of 69

Table of Contents

and acquire or build additional facilities in Austin. We anticipate future costs related to the expansion to range from $15 million to $20 million.

Although we cannot provide assurances to our stockholders that we will be able to generate sufficient cash in the future, we anticipate that our existing capital resources and cash flow generated from future operations will enable us to maintain our current level of operations for at least the next 12 months.

Revolving Credit Facility

The Company maintained a Credit Agreement (the “Credit Agreement”) with Wells Fargo Bank, National Association, as Administrative Agent and Issuing Lender, Barclays Bank, as Syndication Agent, Wells Fargo Securities, LLC and Barclays Capital, as Joint Lead Arrangers and Co-Book Managers, and the lenders referred to therein (the “Lenders”). The aggregate borrowing limit under the unsecured revolving credit facility was $100 million with a $15 million letter of credit sublimit and was intended to provide the Company with short-term borrowings for working capital and other general corporate purposes. At March 30, 2013, the Company has no borrowings against this facility.

The Credit Agreement contained customary affirmative covenants, including, among others, covenants regarding the payment of taxes and other obligations, maintenance of insurance, reporting requirements and compliance with applicable laws and regulations. Further, the Credit Agreement contains customary negative covenants limiting the ability of the Company or any Subsidiary Guarantors to, among other things, incur debt, grant liens, make investments, effect certain fundamental changes, make certain asset dispositions, make certain restricted payments, enter into certain transactions with Affiliates and permit aggregate Capital Expenditures to exceed $90.0 million on a rolling four-quarter basis. The facility also contained certain negative financial covenants providing that (a) the ratio of Consolidated funded indebtedness to Consolidated EBITDA for the prior four consecutive quarters must not be greater than 1.75 to 1.00 and (b) the ratio of Consolidated EBITDA for the prior four consecutive quarters to Consolidated interest expense for the prior four consecutive quarters must not be less than 3.50 to 1.00. The Company was in compliance with these covenants at March 30, 2013. Additionally, there were no borrowings under the facility during fiscal year 2013. The credit facility expired on April 19, 2013 and was not renewed.

For additional details see Note 8 — Revolving Line of Credit.

Off Balance Sheet Arrangements

As of March 30, 2013, the Company did not have any material off-balance-sheet arrangements, as defined in Item 303(a)(4)(ii) of SEC Regulation S-K.

Contractual Obligations

In our business activities, we incur certain commitments to make future payments under contracts such as purchase orders, operating leases and other long-term contracts. Maturities under these contracts are set forth in the following table as of March 30, 2013:

Page 32 of 69

Table of Contents

Certain of our operating lease obligations include escalation clauses. These escalating payment requirements are reflected in the table.

ITEM 7A.  Quantitative and Qualitative Disclosures about Market Risk

We are exposed to market risks associated with interest rates on our debt securities, currency movements on non-U.S. dollar denominated assets and liabilities, and the effect of market factors on the value of our marketable equity securities. We assess these risks on a regular basis and have established policies that are designed to protect against the adverse effects of these and other potential exposures. All of the potential changes noted below are based on sensitivity analyses as of March 30, 2013. Actual results may differ materially.

Interest Rate Risk

Our primary financial instruments include cash equivalents, marketable securities, accounts receivable, accounts payable, and accrued liabilities. The Company’s investments are managed by outside professional managers within investment guidelines set by the Company. These guidelines include security type, credit quality, and maturity, and are intended to limit market risk by restricting the Company’s investments to high quality debt instruments with relatively short-term maturities. The Company does not use derivative financial instruments in its investment portfolio. Due to the short-term nature of our investment portfolio and the current low interest rate environment, our downside exposure to interest rate risk is minimal.

To provide a meaningful assessment of the interest rate risk associated with our investment portfolio, we performed a sensitivity analysis to determine the impact a change in interest rates would have on the value of our investment portfolio. At March 30, 2013, an immediate one percent, or 100 basis points, increase or decrease in interest rates could result in a $1.8 million fluctuation in our annual interest income. However, our investment portfolio holdings as of March 30, 2013, yielded less than 100 basis points, which reduces our downside interest rate risk to the amount of interest income recognized in fiscal year 2013, or $0.4 million. At March 31, 2012, an immediate one percent, or 100 basis points, increase or decrease in interest rates could result in a $0.6 million fluctuation in our annual interest income. However, our investment portfolio holdings as of March 31, 2012, yielded less than 100 basis points, which reduces our downside interest rate risk to the amount of interest income recognized in fiscal year 2012, or $0.5 million. At March 26, 2011, an immediate one percent, or 100 basis points, increase or decrease in interest rates could result in a $1.8 million fluctuation in our annual interest income. However, our investment portfolio holdings as of March 26, 2011, yielded less than 100 basis points, which reduces our downside interest rate risk to the amount of interest income recognized in fiscal year 2011, or $0.9 million. For all of these fiscal years, the risks associated with fluctuating interest rates were limited to our annual interest income and not the underlying principal as we generally have the ability to hold debt related investments to maturity. The amounts disclosed in this paragraph are based on a 100 basis point fluctuation in interest rates applied to the average cash balance for that fiscal year.

Foreign Currency Exchange Risk

Our revenue and spending is transacted primarily in U.S. dollars; however, in fiscal years 2013, 2012, and 2011, we entered into routine transactions in other currencies to fund the operating needs of our design, technical support, and sales offices outside of the U.S. As of March 30, 2013 and March 31, 2012, a ten percent change in the value of the related currencies would not have a material impact on our results of operations and financial position. During fiscal years 2013, 2012, and 2011, we did not enter into any foreign currency hedging contracts.

In addition to the direct effects of changes in exchange rates on the value of open exchange contracts, we may, from time to time, have changes in exchange rates that can also affect the volume of sales or the foreign currency sales prices of our products and the relative costs of operations based overseas.

Page 33 of 69

Table of Contents

ITEM 8.  Financial Statements and Supplementary Data

Index to Consolidated Financial Statements

Page 34 of 69

Table of Contents

Report of Independent Registered Public Accounting Firm

The Board of Directors and Stockholders of Cirrus Logic, Inc.

We have audited the accompanying consolidated balance sheets of Cirrus Logic, Inc. (the Company) as of March 30, 2013 and March 31, 2012, and the related consolidated statements of comprehensive income, stockholders’ equity, and cash flows for each of the three fiscal years in the period ended March 30, 2013. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Cirrus Logic, Inc. at March 30, 2013 and March 31, 2012, and the consolidated results of its operations and its cash flows for each of the three fiscal years in the period ended March 30, 2013, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Cirrus Logic, Inc.’s internal control over financial reporting as of March 30, 2013, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated May 29, 2013 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

Austin, Texas

May 29, 2013

Page 35 of 69

Table of Contents

Report of Independent Registered Public Accounting Firm

The Board of Directors and Stockholders of Cirrus Logic, Inc.

We have audited Cirrus Logic, Inc.’s (the Company) internal control over financial reporting as of March 30, 2013, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Cirrus Logic, Inc.’s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Annual Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Cirrus Logic, Inc. maintained, in all material respects, effective internal control over financial reporting as of March 30, 2013, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Cirrus Logic, Inc. as of March 30, 2013 and March 31, 2012, and the related consolidated statements of comprehensive income, stockholders’ equity, and cash flows for each of the three fiscal years in the period ended March 30, 2013 of Cirrus Logic, Inc. and our report dated May 29, 2013 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

Austin, Texas

May 29, 2013

Page 36 of 69

Table of Contents

CIRRUS LOGIC, INC.

CONSOLIDATED BALANCE SHEETS

(in thousands)

The accompanying notes are an integral part of these financial statements.

Page 37 of 69

Table of Contents

CIRRUS LOGIC, INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

(in thousands, except per share amounts)

The accompanying notes are an integral part of these financial statements.

Page 38 of 69

Table of Contents

CIRRUS LOGIC, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands)