Clean Energy Technologies, Inc. - Quarter Report: 2012 March (Form 10-Q)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

(Mark One)

R	QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
	For the quarterly period ended March 31, 2012
or
£	TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from  to

     Commission File Number: 333-125678 (1933 Act)

PROBE MANUFACTURING, INC.

(Exact name of registrant as specified in its charter)

(949) 273-4990

(Registrant’s telephone number, including area code)

N/A

(Former name, former address and former fiscal year, if changed since last report)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Sections 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.      R  Yes £ No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).                                                 R Yes £ No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.  (check one)

Large accelerated filer		o		Accelerated filer		o
Non-accelerated filer		o (Do not check if a smaller reporting company)		Smaller reporting company		þ

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).       

                              £ Yes R No

    As of May 9, 2012 there were 198,311,803 shares of common stock of Probe Manufacturing, Inc. outstanding.

 

Page 1 of 32

Table of Contents

PROBE MAUFACTURING, INC.

(A Nevada Corporation)

TABLE OF CONTENTS

 

 

Exhibit 31.1

Exhibit 31.2

Exhibit 32.1

Exhibit 32.2

EX-101 INSTANCE DOCUMENT

EX-101 SCHEMA DOCUMENT

EX-101 CALCULATION LINKBASE DOCUMENT

EX-101 LABELS LINKBASE DOCUMENT

EX-101 PRESENTATION LINKBASE DOCUMENT

EX-101 DEFINITION LINKBASE DOCUMENT

Page 2 of 32

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors:

Probe Manufacturing, Inc.

17475 Gillette Avenue

Irvine, CA  92614

We have reviewed the accompanying balance sheet of Probe Manufacturing, Inc. as of March 31, 2012 and the related statements of operations and cash flows for the three month period ended March 31, 2012. These financial statements are the responsibility of the Company’s management.

We conducted our review in accordance with the standards of the Public Company Accounting Oversight Board (United States). A review of interim financial information consists principally of applying analytical procedures and making inquiries of persons responsible for financial and accounting matters. It is substantially less in scope than an audit conducted in accordance with standards of the Public Company Accounting Oversight Board (United States), the objective of which is the expression of an opinion regarding the financial statements taken as a whole. Accordingly, we do not express such an opinion.

Based on our review, we are not aware of any material modifications that should be made to the accompanying interim financial statements referred to above for them to be in conformity with accounting principles generally accepted in the United States of America.

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 1, conditions exist which raise substantial doubt about the Company’s ability to continue as a going concern. The financial statements do not include any adjustments that might result from the outcome of the uncertainty.

/S/W.T. Uniack

W.T. UNIACK & CO, CPA’s, P.C.

May 10, 2012

Woodstock, Georgia

Page 3 of 32

Table of Contents

PART I - FINANCIAL INFORMATION

Item 1. Financial Statements

The accompanying notes are an integral part of these financial statements.

Page 4 of 32

Table of Contents

The accompanying notes are an integral part of these financial statements.

 

Page 5 of 32

Table of Contents

The accompanying notes are an integral part of these financial statements.

 

 

Page 6 of 32

Table of Contents

PROBE MANUFACTURING, INC.

NOTES TO CONDENSED FINANCIAL STATEMENTS (UNAUDITED)

The use of the words “we,” “us,” “our” or “the Company” refers to Probe Manufacturing, Inc. and its subsidiaries, except where the context otherwise requires.

1. Organization and Description of the Business.

Probe Manufacturing Industries, Inc. was incorporated on July 7, 1995. On April 21, 2005, the Company was re-domiciled from California to Nevada, and changed its name to Probe Manufacturing, Inc. (the “Company,” “Probe,” or “PMI”) We provide global design and manufacturing services to original electronic equipment manufacturers from our 23,000 sq./ft. facility in Irvine, California and strategic locations worldwide. Our revenue is generated from sales of our services primarily to customers in the medical device, aerospace, automotive, industrial and instrumentation product manufacturers. We provide our domestic customers with low cost, low risk, flexible and high quality manufacturing services. We utilize global partnerships to secure the best cost and materials available by providing our customers with onshore, scalable manufacturing solutions. The services that we provide are commonly referred to as Electronics Manufacturing Services (EMS). Our EMS offerings include new product introduction, collaborative design, procurement and materials management, product manufacturing, product warranty repair, and end-of-life support. We offer our customers comprehensive and integrated design and manufacturing services, from initial product design to production and direct order fulfillment. Our engineering services include product design, printed circuit board layout, prototyping, and test development. Our supply chain management solutions include purchasing, management of materials, and order fulfillment. Our manufacturing services include surface mount and through-hole assembly, cable assembly, mechanical assembly, and fully integrated box build systems for high complexity electronics.

The majority of our revenue is driven from manufacturing a mix of complex printed circuit board assemblies (PCBA), and box build assemblies.  Some examples of our customer’s finished goods products includes medical devices such as portable ultrasound and electro-stimulation therapy equipment, electronic control units that help vehicles run on natural gas, electronic control units for precision laser welding equipment, PCB’s for landing gear systems and flap controllers, RFID products, Industrial sensors  and devices for defense industry.

Our vision is to be the preeminent manufacturing foundry for startups and technological innovators, while expanding our low cost and scalable domestic operations leveraging global opportunities.

As innovation, cost, and time to market become hyper competitive, domestic OEM’s are now compelled to use EMS partners with easy onshore access, providing local program management during product conceptualization, development, and integration.  Many of the mid-tier OEMs in industries such as military/aerospace, medical, industrial/instrumentation, and green-tech products tend to be too small for $1 billion-plus revenue EMS companies. Most of these OEMs value close proximity and the ability to provide complex manufacturing and personal customer service, which often favors regional providers that truly value and foster their relationships.

Furthermore, with the recent cost increases in labor, currency movements and freight concerns, the ability to also provide near-shore manufacturing is expected to generate increased interest. The low to medium EMS market compared to high volume has proved to be a higher margin with higher gross profits and sustained growth momentum. Our target accounts are mid-tier, U.S. based OEMs with annual sales from $15 million to $500 million.

We believe that the combination of: (i) our management expertise; (ii) low overhead and cost structure; (iii) sophisticated management system developed internally to oversee operational systems; (iv) high

Page 7 of 32

Table of Contents

PROBE MANUFACTURING, INC.

NOTES TO FINANCIAL STATEMENTS (UNAUDITED) – (Continued)

technology onshore and managed offshore manufacturing; and (v) global relationships and domestic customer centric program management team, PMI is well positioned to take advantage of the projected increase in outsourced onshore manufacturing.

Going Concern

The financial statements have been prepared on a going concern basis, which contemplates continuity of operations, realization of assets and liquidation of liabilities in the normal course of business. Although for the three months ended March 31, 2012, we had a net profit of $12,717 a working capital surplus of $202,341 and a shareholder surplus of $354,063; we had an accumulated deficit of $(225,766) our ability to operate as a going concern is still dependent upon our ability (1) to obtain sufficient debt and/or equity capital and/or (2) continue to generate positive cash flow from operations and maintain profitability.

Plan of Operations

Management is taking the following steps to sustain profitability and growth: (i) To build and pursue global opportunities leveraging core competencies; (ii) organic growth, new sales and expansion of services along the supply chain line; (iii) manufacturing rights and equity through our manufacturing foundry platform; (iv) expansion of capabilities and competencies through mergers & acquisitions providing scale, cost synergies and revenue opportunities.

Our future success is likely dependent on our ability to sustain profitable growth and attain additional capital to support growth. There can be no assurance that we will be successful in obtaining any such financing, or that it will be able to generate sufficient positive cash flow from operations.  The successful outcome of these or any future activities cannot be determined at this time and there is no assurance that if achieved, we will have sufficient funds to execute its business plans. The financial statements do not include any adjustments relating to the recoverability and classification of asset carrying amounts or the amount and classification of liabilities that might result should we be unable to continue as a going concern.  

There can be no assurances that this financing will be sufficient to sustain profitable growth and attain additional capital to support growth. There can be no assurance that we will be successful in obtaining any such additional financing, or that we will be able to generate sufficient positive cash flow from operations.  The successful outcome of these or any future activities cannot be determined at this time and there is no assurance that if achieved, we will have sufficient funds to execute its business plans. The financial statements do not include any adjustments relating to the recoverability and classification of asset carrying amounts or the amount and classification of liabilities that might result should we be unable to continue as a going concern.  

2. Basis of Presentation and Summary of Significant Accounting Policies.

Our accompanying condensed financial statements have been prepared by us in accordance with generally accepted accounting principles in the United States of America, or GAAP, in conjunction with the rules and regulations of the U. S. Securities and Exchange Commission, or the SEC. Certain information and footnote disclosures required for annual financial statements have been condensed or excluded pursuant to SEC rules and regulations. Accordingly, our accompanying condensed financial statements do not include all of the information and footnotes required by GAAP for complete financial statements. Our accompanying condensed financial statements reflect all adjustments which are, in our view, of a normal recurring nature and necessary for a fair presentation of our financial position, results of operations and

Page 8 of 32

Table of Contents

PROBE MANUFACTURING, INC.

NOTES TO FINANCIAL STATEMENTS (UNAUDITED) – (Continued)

cash flows for the interim period. Interim results of operations are not necessarily indicative of the results to be expected for the full year; such full year results may be less favorable.

In preparing our accompanying financial statements, management has evaluated subsequent events through the financial statement issuance date. We believe that although the disclosures contained herein are adequate to prevent the information presented from being misleading, our accompanying condensed financial statements should be read in conjunction with our audited consolidated financial statements and the notes thereto included in our 2011 Annual Report on Form 10-K, as filed with the SEC on April 9, 2012.

Cash and Cash Equivalents

We maintain the majority of its cash accounts at a commercial bank. The total cash balance is insured by the Federal Deposit Insurance Corporation (“FDIC”) up to $250,000 per commercial bank. For purposes of the statement of cash flows we consider all cash and highly liquid investments with initial maturities of one year or less to be cash equivalents.

Estimates

The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. Such estimates may be materially different from actual financial results. Significant estimates include the recoverability of long-lived assets, the collection of accounts receivable and valuation of inventory and reserves.

Accounts Receivable

We grant credit to its customers located within the United States of America; and do not require collateral. Our ability to collect receivables is affected by economic fluctuations in the geographic areas and industries served by us.

Reserves for un-collectable amounts are provided, based on past experience and a specific analysis of the accounts.  Although we expect to collect amounts due, actual collections may differ from the estimated amounts. As of March 31, 2012, we had a reserve for potentially un-collectable accounts of $20,000.  Five customers accounted for approximately 73% of accounts receivable at March 31, 2012 and no one customer accounted for 22% of the accounts receivable balance. Our trade accounts primarily represent unsecured receivables.  Historically, our bad debt write-offs related to these trade accounts have been insignificant.

Inventory

Inventories are valued at the lower of weighted average cost or market value. Our industry experiences changes in technology, changes in market value and availability of raw materials, as well as changing customer demand.  We make provisions for estimated excess and obsolete inventories based on regular audits and cycle counts of our on-hand inventory levels and forecasted customer demands and at times additional provisions are made.  Any inventory write offs are charged to the reserve account. As of March 31, 2012, we had a reserve for potentially obsolete inventory of $165,000.  

Page 9 of 32

Table of Contents

PROBE MANUFACTURING, INC.

NOTES TO FINANCIAL STATEMENTS (UNAUDITED) – (Continued)

Property and Equipment

Property and equipment are stated at cost. Assets held under capital leases are recorded at lease inception at the lower of the present value of the minimum lease payments or the fair market value of the related assets.  We follow the practice of capitalizing property and equipment purchased over $5,000.  The cost of ordinary maintenance and repairs is charged to operations. Depreciation and amortization are computed on the straight-line method over the following estimated useful lives of the related assets:

Furniture and fixtures

3 to 7 years

Equipment

7 to 10 years

Leasehold improvements

2 years (life of the lease)

Long –Lived Assets

Our management assesses the recoverability of its long-lived assets by determining whether the depreciation and amortization of long lived assets over their remaining lives can be recovered through projected undiscounted future cash flows. The amount of long-lived asset impairment if any, is measured based on fair value and is charged to operations in the period in which long-lived assets impairment is determined by management. There can be no assurance however, that market conditions will not change or demand for our services will continue, which could result in impairment of long-lived assets in the future.

Revenue Recognition

Revenue from product and services are recognized at the time goods are shipped or services are provided to the customer, with an appropriate provision for returns and allowances. Terms are generally FOB origination with the right of inspection and acceptance. We have not experienced a material amount of rejected or damaged product.

Fair Value of Financial Instruments

The carrying amount of accounts payable and accrued expenses are considered to be representative of their respective fair values because of the short-term nature of these financial instruments.

Other Comprehensive Income

We have no material components of other comprehensive income (loss) and accordingly, net loss is equal to comprehensive loss in all periods.

Net Profit / (Loss) per Common Share      

Basic profit / (loss) per share is computed on the basis of the weighted average number of shares of our common Stock outstanding.  As of March 31, 2012, we had outstanding common stock shares of 198,319,056 used in the calculation of basic earnings per share. Basic Weighted average common stock  shares and equivalents for the three months ended March 31, 2012, was 198,311.803. As of March 31, 2012, we had outstanding warrants to purchase 10,682,955 additional common stock shares, options to purchase 1,103,861 additional common stock shares and common stock shares to be issued of 4,250,000, which may dilute future earnings per share. Fully diluted weighted average common stock shares and equivalents for the three months ended March 31, 2012, was 209,960,113.

Page 10 of 32

Table of Contents

PROBE MANUFACTURING, INC.

NOTES TO FINANCIAL STATEMENTS (UNAUDITED) – (Continued)

Research and Development

For the three months ended March 31, 2012 and 2011, respectively, we expensed zero for research and development.

Segment Information      

We operate in one segment; our primary business of electronics contract manufacturing.

The North American Asset-Backed Securitization program and the accounts receivable factoring program were amended effective in the quarter ended July 2, 2010, such that sales of accounts receivable from these programs continue to be accounted for as sales of financial assets and are removed from the consolidated balance sheets. Cash received from the sale of accounts receivables under these programs, including amounts received for the beneficial interest that are paid upon collection of accounts receivables, are reported as cash provided by operating activities in the statement of cash flows (see Note 8).

Share Based Compensation   

The company has adopted the use of Statement of Financial Accounting Standards No. 123R, “Share-Based Payment” (SFAS No. 123R) (now contained in FASB Codification Topic 718, Compensation-Stock Compensation, or Topic 718), which supersedes APB Opinion No. 25, “Accounting for Stock Issued to Employees”, and its related implementation guidance and eliminates the alternative to use Opinion 25’s intrinsic value method of accounting that was provided in Statement 123 as originally issued. This Statement requires an entity to measure the cost of employee services received in exchange for an award of an equity instruments, which includes grants of stock options and stock warrants, based on the fair value of the award, measured at the grant date, (with limited exceptions). Under this standard, the fair value of each award is estimated on the grant date, using an option-pricing model that meets certain requirements. We use the Black- Scholes option-pricing model to estimate the fair value of our equity awards, including stock options and warrants. The Black-Scholes model meets the requirements of Topic 718; however the fair values generated may not reflect their actual fair values, as it does not consider certain factors, such as vesting requirements, employee attrition and transferability limitations. The Black-Scholes model valuation is affected by our stock price and a number of assumptions, including expected volatility, expected life, risk-free interest rate and expected dividends. We estimate the expected volatility and estimated life of our stock options at grant date based on historical volatility; however, due to the thinly traded nature of our stock, we have chosen to use an average of the annual volatility of like companies in our industry. For the “risk-free interest rate”, we use the Constant Maturity Treasury rate on 90 day government securities. The term is equal to the time until the option expires. The dividend yield is not applicable, as the company has not paid any dividends, nor do we anticipate paying them in the foreseeable future. The fair value of our restricted stock is based on the market value of our free trading common stock, on the grant date calculated using a 20 trading day average. At the time of grant, the share based-compensation expense is recognized in our financial statements based on awards that are ultimately expected to vest using historical employee attrition rates and the expense is reduced accordingly.  It is also adjusted to account for the restricted and thinly traded nature of the shares.  The expense is reviewed and adjusted in subsequent periods if actual attrition differs from those estimates.

We re-evaluate the assumptions used to value our share-based awards on a quarterly basis and if changes warrant different assumptions, the share-based compensation expense could vary significantly from the amount expensed in the past. We may be required to adjust any remaining share-based compensation expense, based on any additions, cancellations or adjustments to the share based awards. The expense is recognized over the period during which an employee is required to provide service in exchange for the award—the requisite service period (usually the vesting period). No compensation cost is recognized for equity instruments for which employees do not render the requisite service. For the three months ended,

Page 11 of 32

Table of Contents

PROBE MANUFACTURING, INC.

NOTES TO FINANCIAL STATEMENTS (UNAUDITED) – (Continued)

Income Taxes

The Company accounts for income taxes under SFAS No. 109 (now contained in FASB Codification Topic 740-10-25, Accounting for Uncertainty in Income Taxes), which requires the asset and liability approach to accounting for income taxes.  Under this method, deferred tax assets and liabilities are measured based on differences between financial reporting and tax bases of assets and liabilities measured using enacted tax rates and laws that are expected to be in effect when differences are expected to reverse. As of December 31, 2011, we had a net operating loss carry forward of $(238,482) and a deferred tax asset of $81,084 using the statutory rate of 34%. The deferred tax asset may be recognized in future periods, not to exceed 20 years.  However, due to the uncertainty of future events we have booked valuation allowance of $76,760.

3.  Inventory.

Inventories by major classification were comprised of the following as of:

4.  Property and Equipment

Property and equipment were comprised of the following at:

PROBE MANUFACTURING, INC.

NOTES TO FINANCIAL STATEMENTS (UNAUDITED) – (Continued)

5.  Accrued Expenses

Accrued expenses were comprised of the following at:

Page 12 of 32

Table of Contents

6.  Capital Lease Obligations  

None.

7. Notes Payable

On February 18, 2011 we entered into an Accounts Receivable Purchasing Agreement (the “ARPA”) with DSCH Capital Partners, LLC d/b/a Far West Capital (“FWC”), an unaffiliated third party.  Pursuant to the ARPA, FWC may purchase, in its sole discretion, eligible accounts receivable of our company on a revolving basis up to a maximum of $750,000.  Under the terms of the ARPA, FWC may purchase eligible receivables from us with full recourse for the face amount of such eligible receivables less a discount of 1.0%.  In addition, we are required to pay FWC a monthly cost of funds fee equal to the net funds employed by FWC at a rate equal to the Wall Street Journal Prime Lending Rate plus 4.75%, with a floor of 7.00%.  FWC will retain 20% of the purchase price of the receivables as a reserve amount.

 

The ARPA also provides that FWC has the right to require us to repurchase any purchased accounts receivable: (a) if there is a dispute as to the validity of such receivable by the account debtor, (b) if certain covenants, warranties or representations made by us with respect to such receivables are breached, (c) upon and during the continuance of an event of default under the ARPA or upon the termination of the ARPA, or (d) if such receivable remains unpaid 90 days after the invoice date.  The ARPA has an initial term of one year with automatic renewals for successive one-year periods. Notwithstanding that, FWC may terminate the ARPA at any time upon 90days prior written notice or without notice upon and during the continuance of an event of default.

 

Additionally, provided there does not exist an event of default under the ARPA or the rider thereto (the “Rider”), FWC may make advances to or for the benefit of the company  in an aggregate amount up to and not to exceed  $250,000.00 from time to time during the term of the Rider and upon our request therefore, which advances shall be subject to all of the terms and conditions of the ARPA and shall be revolving consisting of advances against our  eligible inventory as defined in the Rider as follows: (i) the advances against eligible inventory, at FWC’s discretion, will be in amounts up to the sum 50% of all eligible inventory; provided, however, the advances against eligible inventory shall at no time exceed 33% of the net outstanding purchased accounts under the ARPA plus the outstanding amount due, or net funds employed, from advances made on eligible inventory within conditions contained within the Rider. The

PROBE MANUFACTURING, INC.

NOTES TO FINANCIAL STATEMENTS (UNAUDITED) – (Continued)

Page 13 of 32

Table of Contents

We entered into an unsecured term note, dated November 03, 2009, payable to Linwood Goddard, our Vice President of Quality Control at a 12.00% interest rate, with a 36 month amortization and monthly payments of $334.14.  As of March 31, 2012 the outstanding balance was $4,332.  

We entered into an unsecured term note, dated December 24, 2009, payable to Linwood Goddard our Vice President of Quality Control at a 12.00% interest rate, with a 36 month amortization and monthly payments of $334.14.  As of March 31, 2011 the outstanding balance was $4,332.

Related Party – Notes payable

None.

8.  Commitments and Contingencies

Operating Rental Leases

On October 14, 2009 we entered into a 5 year lease with Bernard family trust, with a commencement date of December 31, 2009.  The facility is approximately 23,000 square feet and is located at 17475 Gillette Avenue, Irvine CA, 92614.  Subsequently on March 28, 2011, we signed an amendment to our facility lease with an increase of 1,600 square feet. The increase in the lease commenced on April 1, 2011 and continues through year five.  The amended lease has the following payments:

	Original Lease	Amended lease
Year	Monthly Rent	Monthly Rent
1	$7,880	$7,880
2	$9,850	$10,650
3	$10,835	$11,715
4	$11,820	$12,780
5	$12,805	$13,845

Litigation

We are not presently subject to any material litigation nor, to our knowledge, is any material litigation threatened against us, which if determined unfavorably to us, would have a material adverse effect on our financial position, results of operations or cash flows.

9.  Capital Stock Transactions

During the three months ended March 31, 2012 we did not issue any capital stock.

Page 14 of 32

Table of Contents

PROBE MANUFACTURING, INC.

NOTES TO FINANCIAL STATEMENTS (UNAUDITED) – (Continued)

Common Stock

Our Articles of Incorporation authorizes us to issue 400,000,000 shares of common stock, par value $0.001 per share. As of March 31, 2012 there were 198,319,056 shares of common stock issued and outstanding, respectively. All outstanding shares of common stock are, and the common stock to be issued will be, fully

paid and non-assessable.  Each share of our common stock has identical rights and privileges in every respect. The holders of our common stock are entitled to vote upon all matters submitted to a vote of our shareholders and are entitled to one vote for each share of common stock held. There are no cumulative voting rights. There were also an additional 4,250,000 shares of common stock that were authorized but

un-issued as of March 31, 2012, for key individuals.

The holders of our common stock are entitled to share equally in dividends and other distributions that our Board of Directors may declare from time to time out of funds legally available for that purpose, if any, after the satisfaction of any prior rights and preferences of any outstanding preferred stock. If we liquidate, dissolve or wind up, the holders of shares of common stock will be entitled to share ratably in the distribution of all of our assets remaining available for distribution after satisfaction of all our liabilities and our obligations to holders of our outstanding preferred stock.

Preferred Stock

Our Articles of Incorporation authorize us to issue 10,000,000 shares of preferred stock.  We authorized 440 shares of Series A Convertible Preferred Stock and 20,000 shares of Series B Convertible Preferred Stock.  On May 25, 2006 the Articles of Incorporation were amended authorizing 15,000 shares Series C Convertible Preferred Stock. As of August 20, 2006 all shares preferred stock has been converted into common stock and there were no outstanding preferred shares as of March 31, 2012.

Stock Repurchase Program

On November 1, 2011, the Company adopted a plan to repurchase up to 5,000,000 shares of its issued and outstanding common stock in accordance with the guidelines specified in Rule 10b-18 and Rule 10b5-1 of the Securities Exchange Act of 1934, as amended.

The plan allows the Company to purchase its issued and outstanding common shares in the open market or in negotiated transactions, from time to time, depending on market conditions and other factors as well as being subject to relevant rules under Untied States securities regulations. The plan does not obligate the Company to make any purchases, at any specific time or in any particular situation. The plan may be suspended or discontinued at any time at the sole discretion of the Company. Share repurchases will be funded with the Company's available cash, after determining the working capital requirements of the Company. Accordingly, there is no guarantee as to the exact number of shares that will be repurchased under the plan.

The company's Board of Directors authorized the repurchase plan because it believes recent market conditions may have caused the Company's common stock to be undervalued. The timing and number of any shares repurchased will depend on the terms and conditions of the plan and no assurance can be given that any specific amount of common stock will be repurchased.

As of March 31, 2012, we had repurchased 115,000 shares of our common stock.

Page 15 of 32

Table of Contents

PROBE MANUFACTURING, INC.

NOTES TO FINANCIAL STATEMENTS (UNAUDITED) – (Continued)

Warrants

Series A - Common Stock Warrants

We currently have 1,192,875 Series A Warrants issued and outstanding.  Each warrant gives the holder the right to purchase 5 shares of common stock (5,964,375 total shares) at $0.33 per share.  The Series A Warrants expired on November 15, 2011.

Series B - Common Stock Warrants

We currently have 1,192,875 Series B Warrants issued and outstanding.  Each warrant gives the holder the right to purchase 5 shares of common stock (5,964,375 total shares) at $0.50 per share.  The Series B Warrants will expire on May 15, 2012.

Series C – Common Stock Warrants

We had 600,000 Series C Warrants issued and outstanding.  Each warrant gave the holder the right to purchase 1 shares of common stock (600,000 total shares) at $0.267 per share.  The Series C Warrants expired on November 5, 2010.

Series D – Common Stock warrants

We currently have 1,718,580 Series D Warrants issued and outstanding.  Each warrant gives the holder the right to purchase 1 share of common stock (1,718,580 total shares) at $0.133 per share. The Series D Warrants expire on November 5, 2012.

For the year ended December 31, 2008 and 2009, we recognized share based compensation expense of  $14,403 and $8,232, respectively from the issuance of options and Warrants.

Series E – Common Stock warrants

Subsequently on April 8, 2011, we issued 3,000,000 series E Warrants.  Each warrant gives the holder the right to purchase 1 share of common stock (3,000,000 total shares) at $0.05 per share. The Series E Warrants will expire on April 8, 2016.

Page 16 of 32

Table of Contents

PROBE MANUFACTURING, INC.

NOTES TO FINANCIAL STATEMENTS (UNAUDITED) – (Continued)

Warrants Activity for the Period and Summary of Outstanding Warrants

A summary of warrant activity for the periods is as follows:

Note: The weighted average exercise price has been adjusted retroactively due to price decreases in the warrant strike prices.

Page 17 of 32

Table of Contents

PROBE MANUFACTURING, INC.

NOTES TO FINANCIAL STATEMENTS (UNAUDITED) – (Continued)

Stock Options

On February 8, 2007 pursuant to our 2006 Qualified Incentive Option Plan which was adopted by our Board of Directors granted Company employees an incentive stock option to purchase up to 652,766 shares of our common stock.  These options were granted at $.173 cents, the fair market value of the Company at the time of the grant. These options expire on February 8, 2017. As of March 31, 2012, there were 194,780 outstanding options under this plan.

On February 8, 2008, we granted stock options to its key employees, to purchase up to 750,000 shares of our common stock, which was approved by our Board of Directors. These options were granted at $.173 cents, the fair market value of the Company at the time of the grant. These options expire on February 8, 2017. As a result, we recognized share-based compensation expense in the amount of $5,313 for the year ended December 31, 2007, $2,657 for the year ended December 31, 2008; $2,656 for the year ended December 31, 2009; $2,656 for the year ended December 31, 2010 and $0 for the year ended December 31, 2011. As of December 31, 2012 the balance of the outstanding options under this plan is 600,000.

On February 28, 2008 our granted stock options to a key employee, to purchase up to 300,000 shares of our common stock, which was approved by our Board of Directors. These options were granted at $.033 cents, the fair market value of the Company at the time of the grant.  These options expire on February 8, 2017. As a result, we recognized share-based compensation expense in the amount of $5,574 for year ended December 31, 2008; $5,576 for the year ended December 31, 2009; $2,786 for the year ended December 31, 2010; and $0 for the year ended December 31, 2011.

On April 7, 2011 our board of directors approved  the Probe Manufacturing, Inc. 2011 Omnibus Incentive Plan to assist in attracting and retaining highly competent employees, directors and consultants to act as an incentive in motivating selected employees, directors and consultants of the Company to achieve long-term corporate objectives and to enable stock-based and cash-based incentive awards to qualify as performance-based compensation for purposes of the tax deduction limitations under Section 162(m) of the Code.

As of March 31, 2012 we have issued 6,000,000 shares pursuant to our 2011 Omnibus Incentive Plan.

Stock to be issued under option and warrant plans

Any shares issued under the existing option or warrant plans will come from the company’s authorized but un-issued, un-registered shares.

10.  Related Party Transactions

Kambiz Mahdi our Chief Executive Officer owns Billet Electronics, which is an independent distributor of electronic components.  From time to time we purchase parts from Billet Electronics. Pursuant to our Code of Ethics, our board of directors approved such related party transaction.

11.  Subsequent Events

None.

Page 18 of 32

Table of Contents

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operation

 

Overview

Probe Manufacturing Industries, Inc. was incorporated on July 7, 1995. On April 21, 2005, the Company was re-domiciled from California to Nevada, and changed its name to Probe Manufacturing, Inc. (the “Company,” “Probe,” or “PMI”) We provide global design and manufacturing services to original electronic equipment manufacturers from our 23,000 sq./ft. facility in Irvine, California and strategic locations worldwide. Our revenue is generated from sales of our services primarily to customers in the medical device, aerospace, automotive, industrial and instrumentation product manufacturers. We provide our domestic customers with low cost, low risk, flexible and high quality manufacturing services. We utilize global partnerships to secure the best cost and materials available by providing our customers with onshore, scalable manufacturing solutions. The services that we provide are commonly referred to as Electronics Manufacturing Services (EMS). Our EMS offerings include new product introduction, collaborative design, procurement and materials management, product manufacturing, product warranty repair, and end-of-life support. We offer our customers comprehensive and integrated design and manufacturing services, from initial product design to production and direct order fulfillment. Our engineering services include product design, printed circuit board layout, prototyping, and test development. Our supply chain management solutions include purchasing, management of materials, and order fulfillment. Our manufacturing services include surface mount and through-hole assembly, cable assembly, mechanical assembly, and fully integrated box build systems for high complexity electronics.

The majority of our revenue is driven from manufacturing a mix of complex printed circuit board assemblies (PCBA), and box build assemblies.  Some examples of our customer’s finished goods products includes medical devices such as portable ultrasound and electro-stimulation therapy equipment, electronic control units that help vehicles run on natural gas, electronic control units for precision laser welding equipment, PCB’s for landing gear systems and flap controllers, RFID products, Industrial sensors and devices for defense industry.

Our vision is to be the preeminent manufacturing foundry for startups and technological innovators, while expanding our low cost and scalable domestic operations leveraging global opportunities.

As innovation, cost, and time to market become hyper competitive, domestic OEM’s are now compelled to use EMS partners with easy onshore access, providing local program management during product conceptualization, development, and integration.  Many of the mid-tier OEMs in industries such as military/aerospace, medical, industrial/instrumentation, and green-tech products tend to be too small for $1 billion-plus revenue EMS companies. Most of these OEMs value close proximity and the ability to provide complex manufacturing and personal customer service, which often favors regional providers that truly value and foster their relationships.

Furthermore, with the recent cost increases in labor, currency movements and freight concerns, the ability to also provide near-shore manufacturing is expected to generate increased interest. The low to medium EMS market compared to high volume has proved to be a higher margin with higher gross profits and sustained growth momentum. Our target accounts are mid-tier, U.S. based OEMs with annual sales from $15 million to $500 million.

We believe that the combination of: (i) our management expertise; (ii) low overhead and cost structure; (iii) sophisticated management system developed internally to oversee operational systems; (iv) high technology onshore and managed offshore manufacturing; and (v) global relationships and domestic customer centric program management team, PMI is well positioned to take advantage of the projected increase in outsourced onshore manufacturing.

Page 19 of 32

Table of Contents

Going Concern

The financial statements have been prepared on a going concern basis, which contemplates continuity of operations, realization of assets and liquidation of liabilities in the normal course of business. Although for the three months ended March 31, 2012, we had a net profit of $12,717, a working capital surplus of $202,341 and a shareholder surplus of $354,063; we had an accumulated deficit of $(225,766) our ability to operate as a going concern is still dependent upon our ability (1) to obtain sufficient debt and/or equity capital and/or (2) continue to generate positive cash flow from operations and maintain profitability.

Plan of Operations

Management is taking the following steps to sustain profitability and growth: (i) To build and pursue global opportunities leveraging core competencies; (ii) organic growth, new sales and expansion of services along the supply chain line; (iii) manufacturing rights and equity through our manufacturing foundry platform; (iv) expansion of capabilities and competencies through mergers & acquisitions providing scale, cost synergies and revenue opportunities.

Our future success is likely dependent on our ability to sustain profitable growth and attain additional capital to support growth. There can be no assurance that we will be successful in obtaining any such financing, or that it will be able to generate sufficient positive cash flow from operations.  The successful outcome of these or any future activities cannot be determined at this time and there is no assurance that if achieved, we will have sufficient funds to execute its business plans. The financial statements do not include any adjustments relating to the recoverability and classification of asset carrying amounts or the amount and classification of liabilities that might result should we be unable to continue as a going concern.  

There can be no assurances that this financing will be sufficient to sustain profitable growth and attain additional capital to support growth. There can be no assurance that we will be successful in obtaining any such additional financing, or that we will be able to generate sufficient positive cash flow from operations.  The successful outcome of these or any future activities cannot be determined at this time and there is no assurance that if achieved, we will have sufficient funds to execute its business plans. The financial statements do not include any adjustments relating to the recoverability and classification of asset carrying amounts or the amount and classification of liabilities that might result should we be unable to continue as a going concern.  

Selected Financial Data

The following selected historical financial information of Probe Manufacturing, Inc. has been derived from the historical results and are not necessarily indicative of future results. The following table is qualified by reference to and should be read in conjunction with Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and Item 8, “Financial Statements and Supplementary Data.”

Page 20 of 32

Table of Contents

Summary of Results:

For the three month period ended March 31, 2012, we had a net profit of $12,717 compared to net profit of $24,729 for the same period in 2011.   

For the three months ended March 31, 2012, our revenue was $1,285,868 compared to $906,313 for the same period in 2011, due to increased orders within existing accounts and we added 6 new customers in 2011.

For the three months ended March 31, 2012, our administrative expense was $389,603 compared to $217,656 for the same period in 2011.

For the three months ended March 31, 2012, our operating income was $57,053 compared $41,105 for the same period in 2011.

Page 21 of 32

Table of Contents

Inventory turns: are calculated as the ratio of cost of material compared to the average inventory for the three months ended March 31, 2012. For the three months ended March 31, 2012, our inventory turns were 4.87 compared to 4.03 for the same period in 2011.

Days Sales in Backlog is calculated based on our back log divided by average daily sales during that period.  For the three months ended March 31, 2012, days sales in backlog was 153 days compared to 228 days for the same period in 2011.  

Days receivables outstanding is calculated as the ratio of average accounts receivable during that period compared to average daily sales for the same period.  For the three months period ended March 31, 2012, days receivables outstanding was 59 days compared to 70 days for the same period in 2011.  

Days Payable outstanding is calculated as the ratio of average accounts payable during that period compared to average daily sales for the same period. For the three months period ended March 31, 2012, days payable outstanding was 69 days compared to 72 days for the same period in 2011.  

Critical Accounting Policies and Basis of Presentation

Our accompanying condensed financial statements have been prepared by us in accordance with generally accepted accounting principles in the United States of America, or GAAP, in conjunction with the rules and regulations of the U. S. Securities and Exchange Commission, or the SEC. Certain information and footnote disclosures required for annual financial statements have been condensed or excluded pursuant to SEC rules and regulations. Accordingly, our accompanying condensed financial statements do not include all of the information and footnotes required by GAAP for complete financial statements. Our accompanying condensed financial statements reflect all adjustments which are, in our view, of a normal recurring nature and necessary for a fair presentation of our financial position, results of operations and cash flows for the interim period. Interim results of operations are not necessarily indicative of the results to be expected for the full year; such full year results may be less favorable.

In preparing our accompanying financial statements, management has evaluated subsequent events through the financial statement issuance date. We believe that although the disclosures contained herein are adequate to prevent the information presented from being misleading, our accompanying condensed financial statements should be read in conjunction with our audited consolidated financial statements and the notes thereto included in our 2011 Annual Report on Form 10-K, as filed with the SEC on April 9, 2012.

Cash and Cash Equivalents

We maintain the majority of its cash accounts at a commercial bank. The total cash balance is insured by the Federal Deposit Insurance Corporation (“FDIC”) up to $250,000 per commercial bank. For purposes of the statement of cash flows we consider all cash and highly liquid investments with initial maturities of one year or less to be cash equivalents.

Estimates

Page 22 of 32

Table of Contents

The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. Such estimates may be materially different from actual financial results. Significant estimates include the recoverability of long-lived assets, the collection of accounts receivable and valuation of inventory and reserves.

Accounts Receivable

We grant credit to its customers located within the United States of America; and do not require collateral. Our ability to collect receivables is affected by economic fluctuations in the geographic areas and industries served by us.

Reserves for un-collectable amounts are provided, based on past experience and a specific analysis of the accounts.  Although we expect to collect amounts due, actual collections may differ from the estimated amounts. As of March 31, 2012, we had a reserve for potentially un-collectable accounts of $20,000.  Five customers accounted for approximately 73% of accounts receivable at March 31, 2012 and no one customer accounted for 22% of the accounts receivable balance. Our trade accounts primarily represent unsecured receivables.  Historically, our bad debt write-offs related to these trade accounts have been insignificant.

Inventory

Inventories are valued at the lower of weighted average cost or market value.  Our industry experiences changes in technology, changes in market value and availability of raw materials, as well as changing customer demand.  We make provisions for estimated excess and obsolete inventories based on regular audits and cycle counts of our on-hand inventory levels and forecasted customer demands and at times additional provisions are made.  Any inventory write offs are charged to the reserve account. As of March 31, 2012, we had a reserve for potentially obsolete inventory of $165,000  .  

Property and Equipment

Property and equipment are stated at cost. Assets held under capital leases are recorded at lease inception at the lower of the present value of the minimum lease payments or the fair market value of the related assets.  We follow the practice of capitalizing property and equipment purchased over $5,000.  The cost of ordinary maintenance and repairs is charged to operations. Depreciation and amortization are computed on the straight-line method over the following estimated useful lives of the related assets:

Furniture and fixtures

3 to 7 years

Equipment

7 to 10 years

Leasehold improvements

2 years (life of the lease)

Long –Lived Assets

Our management assesses the recoverability of its long-lived assets by determining whether the depreciation and amortization of long lived assets over their remaining lives can be recovered through projected undiscounted future cash flows. The amount of long-lived asset impairment if any, is measured based on fair value and is charged to operations in the period in which long-lived assets impairment is determined by management. There can be no assurance however, that market conditions will not change or demand for our services will continue, which could result in impairment of long-lived assets in the future.

Revenue Recognition

Revenue from product and services are recognized at the time goods are shipped or services are provided to the customer, with an appropriate provision for returns and allowances. Terms are generally FOB

Page 23 of 32

Table of Contents

origination with the right of inspection and acceptance. We have not experienced a material amount of rejected or damaged product.

Fair Value of Financial Instruments

The carrying amount of accounts payable and accrued expenses are considered to be representative of their respective fair values because of the short-term nature of these financial instruments.

Other Comprehensive Income

We have no material components of other comprehensive income (loss) and accordingly, net loss is equal to comprehensive loss in all periods.

Net Profit / (Loss) per Common Share      

Basic profit / (loss) per share is computed on the basis of the weighted average number of shares of our common Stock outstanding.  As of March 31, 2012, we had outstanding common stock shares of 198,319,056 used in the calculation of basic earnings per share. Basic Weighted average common stock shares and equivalents for the three months ended March 31, 2012, was 198,311,803. As of March 31, 2012, we had outstanding warrants to purchase 10,682,955 additional common stock shares, options to purchase 1,103,861 additional common stock shares and common stock shares to be issued of 4,250,000, which may dilute future earnings per share. Fully diluted weighted average common stock shares and equivalents for the three months ended March 31, 2012, was 260,960,113.

Research and Development:

For the three months ended March 31, 2012 and 2011 respectively, we expensed zero for research and development.

Segment Information      

We operate in one segment; our primary business of electronics contract manufacturing.

Share Based Compensation   

The company has adopted the use of Statement of Financial Accounting Standards No. 123R, “Share-Based Payment” (SFAS No. 123R) (now contained in FASB Codification Topic 718, Compensation-Stock Compensation, or Topic 718), which supersedes APB Opinion No. 25, “Accounting for Stock Issued to Employees”, and its related implementation guidance and eliminates the alternative to use Opinion 25’s intrinsic value method of accounting that was provided in Statement 123 as originally issued. This Statement requires an entity to measure the cost of employee services received in exchange for an award of an equity instruments, which includes grants of stock options and stock warrants, based on the fair value of the award, measured at the grant date, (with limited exceptions). Under this standard, the fair value of each award is estimated on the grant date, using an option-pricing model that meets certain requirements. We use the Black- Scholes option-pricing model to estimate the fair value of our equity awards, including stock options and warrants. The Black-Scholes model meets the requirements of Topic 718; however the fair values generated may not reflect their actual fair values, as it does not consider certain factors, such as vesting requirements, employee attrition and transferability limitations. The Black-Scholes model valuation is affected by our stock price and a number of assumptions, including expected volatility, expected life, risk-free interest rate and expected dividends. We estimate the expected volatility and estimated life of our stock options at grant date based on historical volatility; however, due to the thinly traded nature of our stock, we have chosen to use an average of the annual volatility of like companies in our industry. For the “risk-free interest rate”, we use the Constant Maturity Treasury rate on 90 day government securities. The term is equal to the time until the option expires. The dividend yield is not applicable, as the company has not paid any dividends, nor do we anticipate paying them in the foreseeable future. The fair value of our restricted stock is based on the market value of our free trading common stock, on the grant date calculated

Page 24 of 32

Table of Contents

using a 20 trading day average. At the time of grant, the share based-compensation expense is recognized in our financial statements based on awards that are ultimately expected to vest using historical employee attrition rates and the expense is reduced accordingly.  It is also adjusted to account for the restricted and thinly traded nature of the shares.  The expense is reviewed and adjusted in subsequent periods if actual attrition differs from those estimates.

We re-evaluate the assumptions used to value our share-based awards on a quarterly basis and if changes warrant different assumptions, the share-based compensation expense could vary significantly from the amount expensed in the past. We may be required to adjust any remaining share-based compensation expense, based on any additions, cancellations or adjustments to the share based awards. The expense is recognized over the period during which an employee is required to provide service in exchange for the award—the requisite service period (usually the vesting period). No compensation cost is recognized for equity instruments for which employees do not render the requisite service. For the three months ended, March 31, 2012 and 2011, we recognized $0 and $0, respectively, in share based amortization expense, due to the issuance of our options and warrants. We also had $0 in non-vested expense as of March 31, 2012to be recognized over the next year.  For the three months ended, March 31, 2012 and 2011 we also recognized $0 and $0 respectively in share based expense due to the authorization to issue 1,250,000 shares of common stock to key individuals, which were unissued as of March 31, 2012.

Income Taxes

The Company accounts for income taxes under SFAS No. 109 (now contained in FASB Codification Topic 740-10-25, Accounting for Uncertainty in Income Taxes), which requires the asset and liability approach to accounting for income taxes.  Under this method, deferred tax assets and liabilities are measured based on differences between financial reporting and tax bases of assets and liabilities measured using enacted tax rates and laws that are expected to be in effect when differences are expected to reverse. As of December 31, 2011, we had a net operating loss carry forward of $(238,482) and a deferred tax asset of $81,084 using the statutory rate of 34%. The deferred tax asset may be recognized in future periods, not to exceed 20 years. However due to uncertainty of future events we have booked valuation allowance of  $76,760.

Recent Accounting Pronouncements

Information regarding recent accounting pronouncements is provided in Note 2, “Summary of Accounting Policies” of the Notes to Condensed Consolidated Financial Statements.

Result of operations:

The following table summarizes certain items in the statements of operations as a percentage of net sales. The financial information and discussion below should be read in conjunction with the accompanying financial statements and notes thereto.

Page 25 of 32

Table of Contents

Net Sales 

For the three month period ended March 31, 2012, our revenue was $1,285,868 compared to $906,313 for the same period in 2011.  

Major Customers

Our top five customers accounted for approximately 73% of our net sales for the three month period ended March 31, 2012, compared to 61%, for the same period in 2011. We believe that our ability to grow our core business depends on increasing sales to existing customers, and on successfully attracting new customers. Customer contracts can be canceled and volume levels can be changed or delayed based on our customer’s performance and the end users’ markets which we have no control over. The timely replacement of delayed, canceled or reduced orders with new business cannot be ensured. In addition, we cannot assume that any of our current customers will continue to utilize our services. Consequently, our results of operations may be materially adversely affected.

Gross Profit 

For the three month period ended March 31, 2012, our gross profits were 35% and 29% in the same period in 2011. This was caused primarily due to increased overtime in the first quarter of 2011 to meet the increased production demand.  

For the three month period ended March 31, 2012, our cost of goods sold was 65% compared to 71% for the same period in 2011, mainly due to the increase in direct labor and overtime as a percent of the sales.  

Selling, General and Administrative (SG&A) Expenses 

For the three month period ended March 31, 2012, our SG&A expense was 30.3% compared to 24% for the same period in 2011.  This decrease is primarily due to the increase in revenue.  Although the percentage has decreased from the previous year the dollar amount of fixed expenses has increased due to the increase in rent and salaries.  

Page 26 of 32

Table of Contents

Net Income/ (Loss) from operations

For the three month period ended March 31, 2012, our net income from operations was 5% compared to a 4% for the same period in 2011.

For the three month period ended March 31, 2012, our interest expense was ($44,336) compared to ($20,221) for the same period in 2011, this was to due to the interest generated from our accounts receivable financing line referenced in Note 7.

Liquidity and Capital Resources: 

On February 18, 2011 we entered into an Accounts Receivable Purchasing Agreement (the “ARPA”) with DSCH Capital Partners, LLC d/b/a Far West Capital (“FWC”), an unaffiliated third party.  Pursuant to the ARPA, FWC may purchase, in its sole discretion, eligible accounts receivable of our company on a revolving basis up to a maximum of $750,000.  Under the terms of the ARPA, FWC may purchase eligible receivables from us with full recourse for the face amount of such eligible receivables less a discount of 1.0%.  In addition, we are required to pay FWC a monthly cost of funds fee equal to the net funds employed by FWC at a rate equal to the Wall Street Journal Prime Lending Rate plus 4.75%, with a floor of 7.00%.  FWC will retain 20% of the purchase price of the receivables as a reserve amount.

 

The ARPA also provides that FWC has the right to require us to repurchase any purchased accounts receivable: (a) if there is a dispute as to the validity of such receivable by the account debtor, (b) if certain covenants, warranties or representations made by us with respect to such receivables are breached, (c) upon and during the continuance of an event of default under the ARPA or upon the termination of the ARPA, or (d) if such receivable remains unpaid 90 days after the invoice date.  The ARPA has an initial term of one year with automatic renewals for successive one-year periods. Notwithstanding that, FWC may terminate the ARPA at any time upon 90days prior written notice or without notice upon and during the continuance of an event of default.

Additionally, provided there does not exist an event of default under the ARPA or the rider thereto (the “Rider”), FWC may make advances to or for the benefit of the company in an aggregate amount up to and not to exceed  $250,000.00 from time to time during the term of the Rider and upon our request therefore, which advances shall be subject to all of the terms and conditions of the ARPA and shall be revolving consisting of advances against our  eligible inventory as defined in the Rider as follows: (i) the advances against eligible inventory, at FWC’s discretion, will be in amounts up to the sum 50% of all eligible inventory; provided, however, the advances against eligible inventory shall at no time exceed 33% of the net outstanding purchased accounts under the ARPA plus the outstanding amount due, or net funds employed, from advances made on eligible inventory within conditions contained within the Rider. The balance cap percentage shall be 25% after 120 days from date of the Rider.  Eligible inventory will be valued at the lower of cost or market value.

Page 27 of 32

Table of Contents

Capital Requirements for long-term Obligations

Off-balance Sheet Arrangement

We currently have no off-balance sheet arrangements.

Item 3.  Quantitative and Qualitative Disclosure about Market Risk.

Not applicable to smaller reporting companies.

Item 4.  Controls and Procedures.

(a)

   Evaluation of disclosure controls and procedures. We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our reports under the Securities Exchange Act of 1934, as amended, or the Exchange Act, is recorded, processed, summarized and reported within the time periods specified in the rules and forms and that such information is accumulated and communicated to us, including our chief executive officer and our chief financial officer, as appropriate, to allow timely decisions regarding required disclosure.

As required by Rules 13a-15(b) and 15d-15(b) of the Exchange Act, an evaluation as of March 31, 2012 was conducted under the supervision and with the participation of our chief executive officer and our chief financial officer, of the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act). Based on this evaluation, our chief executive officer and chief financial officer concluded that our disclosure controls and procedures, as of March 31, 2012, were effective.

(b)

Changes in internal control over financial reporting. There were no changes in our internal control over financial reporting that occurred during the quarter ended March 31, 2012 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

PART II--OTHER INFORMATION

Item 1.

 Legal Proceedings

None.

Page 28 of 32

Table of Contents

Item 1A.  Risk Factors.

There are no material changes from the risk factors previously disclosed in our 2011 Annual Report on Form 10-K, as filed with the United States Securities and Exchange Commission on March 31, 2012, except as disclosed below.

RISKS ABOUT OUR BUSINESS

If we cannot obtain additional financing and/or reduce our operating costs sufficiently, and the effect of other unknown adverse factors could threaten our existence as a going concern.  Therefore, we may have to curtail operations and may ultimately cease to exist.  

The financial statements have been prepared on a going concern basis, which contemplates continuity of operations, realization of assets and liquidation of liabilities in the normal course of business. Although for the three months ended March 31, 2012, we had a net profit of $12,717, a working capital surplus of $202,341 and a shareholder surplus of $354,063; we had an accumulated deficit of $(225,766) our ability to operate as a going concern is still dependent upon our ability (1) to obtain sufficient debt and/or equity capital and/or (2) continue to generate positive cash flow from operations and maintain profitability.

We have an accumulated deficit and may incur additional losses; therefore we may not be able to obtain the additional financing needed for working capital, capital expenditures and to meet our debt service obligations.

As of March 31, 2012, we had current liabilities of $1,626,212 Our debt could limit our ability to obtain additional financing for working capital, capital expenditures, debt service requirements, or other purposes in the future, as needed; to plan for, or react to, changes in technology and in our business and competition; and to react in the event of an economic downturn.

We may not be able to meet our debt service obligations. If we are unable to generate sufficient cash flow or obtain funds for required payments, or if we fail to comply with covenants in our revolving lines of credit, we will be in default.

Item 2.  Unregistered Sales of Equity Securities and Use of Proceeds

None.

Item 3.

 Defaults upon Senior Securities

None.

Item 4.

 [Removed and Reserved.]

Item 5.

 Other Information

None.

Item 6.  Exhibits

The exhibit listed on the Exhibit Index (following the signatures section of this Quarterly Report on

Form 10-Q are included, or incorporated by reference, in this Quarterly Report on Form 10-Q.

Page 29 of 32

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the date indicated.

Signature                  

 Title                                

              

      Date

/s/ Kambiz Mahdi

Chief Executive Officer  

         

May 14, 2012

_______________________

Kambiz Mahdi

/s/ John Bennett

Chief Financial Officer

May 14, 2012

_______________________

John Bennett

Page 30 of 32

Table of Contents

EXHIBIT INDEX

Pursuant to Item 601(a)(2) of Regulation S-K, this Exhibit Index immediately precedes the exhibits.

The following exhibits are included, or incorporated by reference, in this Quarterly Report on Form 10-Q for the period ended March 31, 2012 (are numbered in accordance with Item 601 of Regulation S-K).

EXHIBIT

NUMBER                                         DESCRIPTION

3.1 Articles of Incorporation (included as exhibit 3.1 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference)

3.2 Bylaws (included as exhibit 3.2 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference)

 

4.1 Certificate of Designation for Series A Convertible Preferred Stock, dated May 20, 2004 (included as exhibit 4.1 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference)

4.2 Certificate of Designation for Series B Convertible Preferred Stock dated December 31, 2004 (included as exhibit 4.2 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference)

4.3 Sample Series A Warrant Purchase Agreement (included as exhibit 4.3 to the Form SB-2/A filed on September 26, 2005 and incorporated herein by reference)

4.4 Sample Series B Warrant Purchase Agreement (included as exhibit 4.4 to the Form SB-2/A filed on September 26, 2005 and incorporated herein by reference)

4.5 Sample Amended Series A Warrant Purchase Agreement (included as exhibit 4.5 to the Form SB-2/A filed on November 25, 2005 and incorporated herein by reference)

4.6 Sample Amended Series B Warrant Purchase Agreement (included as exhibit 4.6 to the Form SB-2/A filed on November 25, 2005 and incorporated herein by reference)

4.7. Certificate of Designation of Series C Convertible Preferred Stock dated May 25, 2006 (included as exhibit 4.1 to the Form 8-K filed on June 14, 2006 and incorporated herein by reference)

4.8 Amended Certificate of Designation of Series C Convertible Preferred Stock dated May 25, 2006 (included as exhibit 4.1 to the Form 8-K filed on August 14, 2006 and incorporated herein by reference).

4.9 Sample Amended Series A Warrant Purchase Agreement (included as exhibit 10.1 to the Form 8-k filed on November 15, 2006 and incorporated herein by reference)

4.10 Sample Amended Series B Warrant Purchase Agreement (included as exhibit 10.2 to the Form 8-k filed on November 15, 2006 and incorporated herein by reference)

4.11 Amended Series A Warrant Purchase Agreement (included as exhibit 4.1 to Form 8-K filed on November 10, 2008 and incorporated herein by reference)

4.12 Amended Series B Warrant Purchase Agreement (included as exhibit 4.2 to Form 8-K filed on November 10, 2008 and incorporated herein by reference)

Page 31 of 32

Table of Contents

31.1* Certification of the Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

31.2* Certification of the Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

32.1* Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

32.2* Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

101.INS** XBRL Instance Document

101.SCH** XBRL Taxonomy Extension Schema Document

101.CAL** XBRL Taxonomy Extension Calculation Linkbase Document

101.LAB** XBRL Taxonomy Extension Label Linkbase Document

101.PRE** XBRL Taxonomy Extension Presentation Linkbase Document

101.DEF** XBRL Taxonomy Extension Definition Linkbase Document

________________________

*Filed herewith.

**Furnished herewith.

Page 32 of 32