Clearday, Inc. - Annual Report: 2015 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

ANNUAL REPORT PURSUANT TO SECTIONS 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

(Mark One)

For the fiscal year ended December 31, 2015

OR

For the transition period from                      to                     

Commission File Number 0-21074

SUPERCONDUCTOR TECHNOLOGIES INC.

(Exact name of registrant as specified in its charter)

9101 Wall Street, Suite 1300, Austin, Texas 78754

(Address of principal executive offices) (Zip Code)

Registrant’s telephone number, including area code: (512) 334-8900

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨ or    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨ or    No  x

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x or    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x or    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨ or    No  x

The aggregate market value of the common stock held by non-affiliates was $15.4 million as of June 27, 2015 (the last business day of our most recently completed second fiscal quarter). The closing price of the common stock on that date was $1.05 as reported by the NASDAQ Capital Market. For purposes of this determination, we excluded the shares of common stock held by each officer and director and by each person who was known to us to own 10% or more of the outstanding common stock as of June 27, 2015. The exclusion of shares owned by the aforementioned individuals and entities from this calculation does not constitute an admission by any of such individuals or entities that he or it was or is an affiliate of ours.

We had 40,748,218 shares of common stock outstanding as of the close of business on March 15, 2016.

Table of Contents

SUPERCONDUCTOR TECHNOLOGIES INC.

FORM 10-K ANNUAL REPORT

Year Ended December 31, 2015

Unless otherwise noted, the terms “we,” “us,” “our” refer to the combined and ongoing business operations of Superconductor Technologies Inc. and its subsidiaries

i

Table of Contents

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This Report contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. We claim the protection of the safe harbor contained in the Private Securities Litigation Reform Act of 1995 for these forward looking statements. Our forward-looking statements relate to future events or our future performance and include, but are not limited to, statements concerning our business strategy, future commercial revenues, market growth, capital requirements, new product introductions, expansion plans and the adequacy of our funding. Other statements contained in this Report that are not historical facts are also forward-looking statements. We have tried, wherever possible, to identify forward-looking statements by terminology such as “may,” “will,” “could,” “should,” “expects,” “anticipates,” “intends,” “plans,” “believes,” “seeks,” “estimates” and other comparable terminology.

We caution investors that any forward-looking statements presented in this Report, or that we may make orally or in writing from time to time, are based on the beliefs of, assumptions made by, and information currently available to, us. Such statements are based on assumptions and the actual outcome will be affected by known and unknown risks, trends, uncertainties and factors that are beyond our control or ability to predict. Although we believe that our assumptions are reasonable, they are not guarantees of future performance and some will inevitably prove to be incorrect. As a result, our actual future results can be expected to differ from our expectations, and those differences may be material. Accordingly, investors should use caution in relying on past forward-looking statements, which are based on known results and trends at the time they are made, to anticipate future results or trends.

Some of the risks and uncertainties that may cause our actual results, performance or achievements to differ materially from those expressed or implied by forward-looking statements include the following:

1

Table of Contents

For further discussion of these and other factors see, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Risk Factors” in this Report.

This Report and all subsequent written and oral forward-looking statements attributable to us or any person acting on our behalf are expressly qualified in their entirety by the cautionary statements contained or referred to in this section. We do not undertake any obligation to release publicly any revisions to our forward-looking statements to reflect events or circumstances after the date of this Report.

2

Table of Contents

PART I

ITEM 1. BUSINESS

General

We are a leading company in developing and commercializing high temperature superconductor (“HTS”) materials and related technologies. Superconductivity is the unique ability to conduct electricity with little or no resistance when cooled to “critical” temperatures. HTS materials are a family of elements that demonstrate superconducting properties at temperatures significantly warmer than previous superconducting materials. Electric currents that flow through conventional conductors encounter resistance that requires power to overcome and generates heat. HTS materials can substantially improve the performance characteristics of electrical systems, reduce power loss, and lowering heat generation providing extremely high current carrying density and zero resistance to direct current.

We were established in 1987 shortly after the discovery of HTS materials. Our stated objective was to develop products based on these materials for the commercial marketplace.

After analyzing the market opportunities available, we decided to develop products for the utility and telecommunications industries.

Our initial product was completed in 1998 and we began delivery to a number of wireless network providers. In the following 13 years, we continued to refine and improve the platform, with the primary focus on improving reliability, increasing performance and runtime, and most importantly, removing cost from the manufacturing process of the required subsystems. Our cost reducing efforts led to the invention of our proprietary, high-yield and high throughput HTS material deposition manufacturing process.

In late 2010, we transitioned our research and development efforts to adapting our proprietary HTS material deposition techniques to the production of our HTS Conductus^® wire for next generation power applications, which is our primary opportunity to grow our future revenues. We continue to generate revenue from our legacy wireless communications products. This revenue has been declining and we expect this trend to continue until we completely abandon these products.

Our Proprietary Technology

Our development efforts over the last 28 years have yielded an extensive patent portfolio as well as critical trade secrets, unpatented technology and proprietary knowledge. We have an extensive patent portfolio in addition to critical trade secrets, unpatented technology and proprietary knowledge. Our current patents expire at various dates from 2016 to 2031. We enter into confidentiality and non-disclosure agreements with our employees, suppliers and consultants to protect our proprietary information.

Our strategic plan is to utilize our core proprietary technology in superconductivity and leverage our proprietary manufacturing processes to build Conductus wire for use in electrical power devices. As discussed above, we are adapting our unique HTS material deposition techniques to produce our energy efficient, cost-effective and high performance Conductus wire technology for next generation power applications. We have identified several large initial target markets for superconducting wire including energy (wind turbines, cables, fault current limiters), medical (NMR (nuclear magnetic resonance and MRI (magnetic resonance imaging)), science (high performance magnets) and industrial (motors, generators) applications. We are working with leading industry device manufactures to complete qualification and acceptance testing of Conductus wire. We expect significant commercial production of Conductus wire in the last half of 2016.

Our development efforts (including those described under “Our Future Business” below) can take a significant number of years to commercialize, and we must overcome significant technical barriers and deal with other significant risks, some of which are set out in our public filings, including in particular the “Risk Factors” included in Item 1A of this Report.

3

Table of Contents

Our Future Business

We have created several unique capabilities and HTS manufacturing systems related to our Conductus wire platform that we are seeking to produce by leveraging our leadership in superconducting technologies, extensive intellectual property and HTS manufacturing expertise.

HTS Wire Platform

Our Conductus wire product development is focused on large markets where the advantages of HTS wire are recognized by the industry. Our initial product roadmap targets three important applications: superconducting high power transmission cable, superconducting fault current limiters (SFCL) and high field magnets.

Superconducting High Power Transmission Cable:

Superconducting high power transmission and distribution cable transmit 5 to 10 times the electrical current of traditional copper or aluminum cables with significantly improved efficiency. HTS power cable systems consist of the cable, which is comprised of 100’s of strands of HTS wire wrapped around a copper core, and the cryogenic cooling system to maintain proper operating conditions. HTS power cables are particularly suited to high load areas such as the dense urban business districts of large cities, where purchases of easements and construction costs for traditional low capacity cables may be cost prohibitive. The primary application for HTS cables is medium voltage feeds to load pockets in dense urban areas. In these high demand zones the grid is often saturated with aging infrastructure. HTS technology brings a considerable amount of power to new locations where the construction of additional transmission to distribution substations, with major transformer assets, is not feasible. Another potential use of HTS power cable is to improve grid power transmission by connecting two existing substations. In dense urban environments many substations often reach capacity limits and require redundant transformer capacity to improve reliability HTS cables can tie these existing stations together, avoiding very costly transformer upgrades and construction costs.

Superconducting Fault Current Limiter (SFCL):

With power demand on the rise and new power generation sources being added, the grid has become overcrowded and vulnerable to catastrophic faults. Faults are abnormal flows of electrical current like a short circuit. As the grid is stressed, faults and power blackouts increase in frequency and severity. SFCLs act like powerful surge protectors, preventing harmful faults from taking down substation equipment by reducing the fault current to a safer level (20 – 50% reduction) so that the existing switchgear can still protect the grid. Currently, electrical-utilities use massive 80kA circuit breakers, oversized transformers and fuses to prevent faults from damaging their equipment and protecting against surges. However, once a fault has occurred, standard circuit breakers suffer destructive failure and need to be replaced before service can be restored. In addition, Smart Grid and embedded alternative energy generation enhancements will increase the need for SCFLs. Grid operators face a major challenge in moving power safely and efficiently, from generators to consumers, through several stages of voltage transformation step downs and step ups. At each stage, valuable energy is lost in the form of waste heat. Moreover, while demands are continually rising, space for transformers and substations—especially in dense urban areas—is severely limited. Conventional oil-cooled transformers pose a fire and environmental hazard. Compact, efficient superconducting transformers, by contrast, are cooled by safe, abundant and environmentally benign liquid nitrogen. As an additional benefit, these actively-cooled devices will offer the capability of operating in overload, to twice the nameplate rating, without any loss of life to meet occasional utility peak load demands.

Superconducting High Field magnets:

There are a variety of applications that utilize superconducting magnets in order to capitalize on their unique ability to create extremely high magnetic fields. The NMR and MRI machines of today utilize such superconducting magnets for this very reason. Currently, high-field superconducting magnets are manufactured using commercially available superconducting wire such as niobium-titanium (NbTi) or niobium-tin (Nb3Sn).

4

Table of Contents

NMR and MRI device manufacturers look towards advances in superconducting technologies to improve the overall performance of their systems by dramatically increasing the magnetic fields while reducing size. High demand for a robust, high performance and low cost superconducting wire has spurred rapid development of a next generation alternative. In the last 10 years, new second generation (2G) Rare Earth, Barium, Copper Oxide (ReBCO) superconducting materials have been proven to drastically increase magnetic field strengths, especially at low temperatures. These advanced ReBCO based superconductors now provide an excellent alternative to NbTi and Nb3Sn based materials.

Other Assets and Investments

In September 2014, STI and Robinson Research Institute entered a strategic agreement to jointly engage end customers and partners in the building of superconductor products utilizing our Conductus^® superconducting wire and Robinson Research Institute’s superconducting device technology. The Robinson Research Institute, based at Victoria University of Wellington in New Zealand, has unique capabilities in the production of HTS Roebel cable used in superconducting machines and magnets, and in the development of HTS MRI and HTS transformers. The Robinson Research Institute has been a valuable ally as we prepare for the commercial launch of Conductus wire; Robinson’s performance characterization expertise and applications knowledge are truly impressive. As we move to full production, we are implementing a comprehensive plan to supply Conductus wire and support global leaders in the commercialization of superconducting devices. Robinson is an expert in the development of innovative superconducting products. Jointly, we have identified initial projects including applications such as rotating machines, transformers, scientific magnets and MRI systems. Additionally, Robinson and its partners have a strong focus on Asia and we believe our agreement will help us expand our reach into that fast-growing market. Working alongside many industry leaders, the Robinson Research Institute and its partners have built superconducting devices for the energy industry, recently completing a transformer for use in the electrical grid. In the healthcare market, Robinson has focused on applications of MRI systems where HTS wire gives a competitive advantage.

In July 2012, we contributed 14 issued and pending patents regarding our innovative Reconfigurable Resonance™ (RcR) technology in exchange for a minority investment in Resonant LLC. As of December 31, 2013 our interest in Resonant and the net value of the assets contributed, estimated to approximate fair value, was $185,000. In late September 2014 we entered into a private transaction to sell this minority interest to various buyers for gross proceeds to us of $3.6 million, and net proceeds to us of $3.3 million after offering expenses.

In 2007, we formed a joint venture with Hunchun BaoLi Communication Co. Ltd. (“BAOLI”) to manufacture and sell our SuperLink interference elimination solution in China. We use the equity method of accounting for our 45 percent joint venture interest. The joint venture agreement specified our joint venture partner to supply the capital and local expertise, and for us to provide a license of certain technology and supply key parts for manufacturing. Since 2007, there has been no significant progress to manufacture and sell our SuperLink interference elimination solution in China and the parties have not completed their contributions to the joint venture within the two year period specified by the agreement and Chinese law. We see our primary opportunity to grow future revenues with the production of our HTS Conductus^® wire, and do not expect this joint venture to be a significant part of future revenues.

Licenses

We grant licenses for our technology to other companies. We have granted licenses to, among others, (1) Bruker for Nuclear Magnetic Resonance application, (2) General Dynamics for government applications, (3) Star Cryoelectronics for Superconducting Quantum Interference Device applications and (4) Theva for network infrastructure wireless electronic devices.

Government Contracts

We did not generate revenues from government contracts in the last three years.

5

Table of Contents

Manufacturing

Our manufacturing process involves the operation of sophisticated production equipment and material handling by production technicians. We purchase inventory components and manufacture inventory based on existing customer purchase requests, and to a lesser extent, on sales forecasts. Our primary facility is our advanced manufacturing center in Austin, Texas. This Texas facility addresses our growth expectations for our superconducting wire initiative. The opening of this facility coincided with the delivery of our first superconducting wire production equipment in early 2012. Sales of our Conductus wire are expected to increase as we reach production scale in the second half of 2016 and beyond. We currently assemble and test our wireless communications products at our facilities in Santa Barbara, California.

A number of components used in our products are available from only a limited number of outside suppliers due to unique designs, as well as certain quality and performance requirements. We do not have guaranteed supply arrangements with any of these suppliers, do not maintain an extensive inventory of parts or components and customarily purchase sole or limited source parts and components pursuant to purchase orders. Our reliance on sole or limited source suppliers involves certain risks and uncertainties, many of which are beyond our control, and some of which are set out in our public filings, including in particular the “Risk Factors” included in Item 1A of this Report.

Marketing and Sales

We utilize a direct selling model due to the concentrated customer base for superconducting wire.

Competition

We face competition in various aspects of our technology and product development. Our products compete on the basis of performance, functionality, reliability, pricing, quality and compliance with industry standards. Our primary competitors are American Superconductor (AMSC), SuperPower (Furukawa), SuNam, Fujikura, Sumitomo and THEVA, among others.

Research and Development

Our 2013 through 2015 research and development activities were focused entirely on developing our Conductus wire product. We spent a total of $4.1 million for 2015, and $6.0 million and $6.1 million for 2014 and 2013, respectively, on research and development.

Our Proprietary Technology

We have an extensive patent portfolio, in addition to critical trade secrets, unpatented technology and proprietary knowledge. Our current patents expire at various dates from 2016 to 2031. We enter into confidentiality and non-disclosure agreements with our employees, suppliers and consultants to protect our proprietary information.

Environmental Issues

We use certain hazardous materials in our research, development and manufacturing operations. As a result, we are subject to stringent federal, state and local regulations governing the storage, use and disposal of such materials. Current or future laws and regulations could require substantial expenditures for preventative or remedial action, reduction of chemical exposure, waste treatment or disposal. Although we believe that our safety procedures for the handling and disposing of hazardous materials comply with the standards prescribed by state and federal regulations, there is always the risk of accidental contamination or injury from these materials. To date, we have not incurred substantial expenditures for preventive action with respect to hazardous materials or for remedial action with respect to any hazardous materials accident. However, the use and disposal of hazardous

6

Table of Contents

materials involves the risk that we could incur substantial expenditures for such preventive or remedial actions. If such an accident were to occur, we could be held liable for resulting damages. The liability in the event of an accident or the costs of such remedial actions could exceed our resources or otherwise have a material adverse effect on our financial condition, results of operations or cash flows.

Corporate Information

Our facilities and principal executive offices are located at 9101 Wall Street, Suite 1300, Austin, Texas 78754. Our telephone number is (512) 334-8900. We were incorporated in Delaware on May 11, 1987. Additional information about us is available on our website at www.suptech.com. The information on our web site is not incorporated herein by reference.

Employees

As of December 31, 2015, we had a total of 25 full time employees. None of our employees are represented by a labor union, and we believe that our employee relations are good.

Backlog

Our commercial backlog consists of accepted product purchase orders with scheduled delivery dates during the next twelve months. We had commercial backlog of $58,000 at December 31, 2015, compared to $63,000 at December 31, 2014.

7

Table of Contents

The following section includes some of the material factors that may adversely affect our business and operations. This is not an exhaustive list, and additional factors could adversely affect our business and financial performance. Moreover, we operate in a very competitive and rapidly changing environment. New risk factors emerge from time to time and it is not possible for us to predict all such risk factors, nor can we assess the impact of all such risk factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements. This discussion of risk factors includes many forward-looking statements. For cautions about relying on such forward looking statements, please refer to the section entitled “Forward Looking Statements” at the beginning of this Report immediately prior to Item 1.

Risks Related to Our Business

We have a history of losses and may never become profitable.

In each of our last five years, we have experienced significant net losses and negative cash flows from operations. In 2015, we incurred a net loss of $8.6 million and had negative cash flows from operations of $8.5 million. In 2014, we incurred a net loss of $8.3 million and had negative cash flows from operations of $10 million. Our independent registered public accounting firm has included in its audit reports an explanatory paragraph expressing substantial doubt about our ability to continue as a going concern. If we fail to increase our revenues, we may not achieve and may not maintain profitability, we may not realize our investment in infrastructure, and may not meet our expectations or the expectations of financial analysts who report on our stock.

We need to raise additional capital. If we are unable to raise capital our ability to implement our current business plan and ultimately our viability as a company could be adversely affected

At December 31, 2015, we had $7.5 million in cash and cash equivalents. Our current forecast is that our cash resources will be sufficient to fund our planned operations into the fourth quarter of 2016. Our cash resources will not be sufficient to fund our business for the next twelve months. Therefore, unless we can materially grow our revenues from commercial operations during such period, we will need to raise additional capital during the next 12-months to implement our current business plan and maintain the viability of the Company.

We believe the key factors to our future liquidity will be our ability to successfully use our expertise and our technology to generate revenues in various ways, including commercial operations, joint ventures and licenses. Because of the expected timing and uncertainty of these factors, we will need to raise funds to meet our working capital needs.

Additional financing may not be available on acceptable terms or at all. If we issue additional equity securities to raise funds, the ownership percentage of our existing stockholders would be reduced. New investors may demand rights, preferences or privileges senior to those of existing holders of common stock and could also require that we issue warrants in connection with sales of our stock. If we cannot raise any needed funds to grow our commercial resources, we might be forced to make changes to, or delay aspects of, our business plan which could adversely affect our ability to implement our current business plan and ultimately our viability as a company.

Our strategic initiative to develop a new wire platform may not prove to be successful.

We have spent a considerable amount of resources in developing a new wire platform for power applications. Substantial technical and business challenges remain before we can have a commercially successful product introduction. We may not be able to overcome these challenges in a timely or cost effective manner, if at all. Such a failure could adversely impact our prospects, liquidity, stock price and carrying value of our fixed assets.

8

Table of Contents

There are numerous technological challenges that must be overcome in order for our Conductus wire to become commercially successful and our ability to address such technological challenges may adversely affect our ability to gain customers.

We expect to begin commercial Conductus wire production in 2016. Conductus^® wire is uniquely positioned to address three key technical challenges in the market: high performance, improved economics and commercial-scale capacity. To date, we, along with existing HTS wire manufacturers, have not overcome these challenges to allow for broad commercialization of HTS wire. Customers cannot purchase long-length wire with any reasonable confidence or guaranteed volume; and electric utilities lack confidence in product availability which leads to delays in their deployment roadmap. HTS wire performance is currently below what many customers require. Many power applications require high performance wire with high current carrying capacity, mechanical durability, electrical integrity with low AC losses and minimal splices. Producing high performance HTS wire has proven difficult, especially at volumes required for large scale deployment. The high demand for high performance wire available in very low volume results in a high wire price that narrows the market and limits commercial viability. Delays in our Conductus wire development, as a result of technological challenges or other factors, may result in the introduction or commercial acceptance of our Conductus wire products later than expected.

The commercial uses of superconducting wire and superconducting wire related products are limited today, and a broad commercial market may not develop.

Even if the technological hurdles are overcome, there is no certainty that a robust commercial market for unproven HTS wire products will come to fruition. To date, commercial use of HTS wire has been limited to small feasibility demonstrations, and these projects are largely subsidized by government authorities. While customer demand is high and market forecasts project large revenue opportunity for superconducting wire in power applications, the market may not develop and superconducting wire might never achieve long term, broad commercialization. In such an event, we would not be able to commercialize our Conductus wire initiative and our business could be adversely impacted.

We have limited experience marketing and selling superconducting wire products, and our failure to effectively market and sell our superconducting wire solutions would lower our revenue and cash flow.

We have limited experience marketing and selling our Conductus wire. Once our Conductus wire is ready for commercial use, we will have to hire and develop a marketing and sales team to effectively demonstrate the advantages of our product over both more traditional products and competing superconducting products or other adjacent technologies. We may not be successful in our efforts to market this new technology.

We expect continued customer pressures to reduce our product pricing which may adversely affect our ability to operate on a commercially viable basis.

We expect to face pressure to reduce prices and accordingly, the average selling price of our Conductus wire. We anticipate customer pressure on our product pricing will continue for the foreseeable future. HTS wire is currently being sold at $250/kiloampere-meter (kA-m). At this price, HTS wire represents more than half the cost of the end device. A price reduction is required for long term commercialization. Cryogenic systems, including cryocoolers and cryostats, have been developed but will also need to be cost optimized as HTS wire becomes available in volume. We have plans to further reduce the manufacturing cost of our products, but there is no assurance that our future cost reduction efforts will keep pace with price erosion. We will need to further reduce our manufacturing costs through engineering improvements and economies of scale in production and purchasing in order to achieve adequate gross margins. We may not be able to achieve the required product cost savings at a rate needed to keep pace with competitive pricing pressure. Additionally, we may be forced to discount future orders or may never reach commercial viability. If we fail to reach our cost saving objectives or we are required to offer future discounts, our business may be harmed.

9

Table of Contents

We face competition with respect to various aspects of our technology and product development.

Our current wireless products compete on the basis of performance, functionality, reliability, pricing, quality, and compliance with industry standards. With respect to our Conductus wire materials, we compete with American Superconductor (AMSC), SuperPower (Furukawa), SuNam, Fujikura, Sumitomo and THEVA, among others. In addition, we currently supply components and license technology to several companies that may eventually decide to manufacture or design their own HTS components, rather than purchasing or licensing our technology. If we are unable to compete successfully against our current or future competitors, then our business and results of operations will be adversely affected.

We may not be able to compete effectively against alternative technologies.

Our products also compete with a number of alternative approaches and technologies. Some of these alternatives may be more cost effective or offer better performance than our products and we may not succeed in competing against these alternatives.

We currently rely on specific technologies and may not successfully adapt to rapidly changing market environments.

We must overcome technical challenges to commercialize our Conductus wire. If we are able to do so, we will need to attain customer acceptance of our Conductus wire, and we cannot ensure that such acceptance will occur. We will have to continue to develop and integrate advances to our core technologies. We will also need to continue to develop and integrate advances in complementary technologies. We cannot guarantee that our development efforts will not be rendered obsolete by research efforts and technological advances made by others. Our business success depends upon our ability to keep pace with advancing technology, including materials, processes and industry standards.

We may experience significant fluctuations in sales and operating results from quarter to quarter.

Our quarterly results may fluctuate due to a number of factors, including:

Order deferrals and cancellations by our customers, declining average sales prices, changes in the mix of products sold, increases in inventory and finished goods, delays in the introduction of new products and longer than anticipated sales cycles for our products have, in the past, adversely affected our results of operations. If our customers desire to purchase products in excess of the forecasted amounts or in a different product mix, there may not be enough inventory or manufacturing capacity to fill their orders.

Due to these and other factors, our past results have limited predictive value as to our Conductus wire initiative. Future revenues and operating results may not meet the expectations of stock analysts and investors. In either case, the price of our common stock could be materially adversely affected.

Worldwide economic uncertainty may adversely affect our business, operating results and financial condition.

The United States and global economies continue to experience a period of economic and financial uncertainty, which could result in economic volatility having direct and indirect adverse effects on our business, operating results and financial condition in a number of ways. For example, current or potential customers may

10

Table of Contents

delay or decrease spending with us may delay paying us for previously purchased products, or may not pay us at all. In addition, this recent downturn has had, and may continue to have, an unprecedented negative impact on the global credit markets. If we are required to obtain financing in the near term to meet our working capital or other business needs, we may not be able to obtain that financing. Further, even if we are able to obtain the financing we need, it may be on terms that are not favorable to us, with increased financing costs and restrictive covenants.

Our reliance on a limited number of suppliers and the long lead time of components for our products could impair our ability to manufacture and deliver our systems on a timely basis.

A number of components used in our products are available from a limited number of outside suppliers due to unique designs as well as certain quality and performance requirements. Our reliance on sole or limited source suppliers involves certain risks and uncertainties, many of which are beyond our control. These include the possibility of a shortage or the discontinuation of certain key components. Any reduced availability of these parts or components when required could impair our ability to manufacture and deliver our systems on a timely basis and result in the delay or cancellation of orders, which could harm our business.

In addition, the purchase of some of our key components involves long lead times and, in the event of unanticipated increases in demand for our solutions, we may be unable to obtain these components in sufficient quantities to meet our customers’ requirements. We do not have guaranteed supply arrangements with any of these suppliers, do not maintain an extensive inventory of parts or components and customarily purchase sole or limited source parts and components pursuant to purchase orders. Business disruptions, quality issues, production shortfalls or financial difficulties of a sole or limited source supplier could materially and adversely affect us by increasing product costs, or eliminating or delaying the availability of such parts or components. In such events, our inability to develop alternative sources of supply quickly and on a cost-effective basis could impair our ability to manufacture and deliver our systems on a timely basis and could harm our business.

Our reliance on a limited number of suppliers exposes us to quality control issues.

Our reliance on certain single-source and limited-source components exposes us to quality control issues if these suppliers experience a failure in their production process or otherwise fail to meet our quality requirements. A failure in single-source or limited-source components or products could force us to repair or replace a product utilizing replacement components. If we cannot obtain comparable replacements or effectively return or redesign our products, we could lose customer orders or incur additional costs, which could have a material adverse effect on our gross margins and results of operations.

Our ability to protect our patents and other proprietary rights is uncertain, exposing us to possible losses of competitive advantage.

Our efforts to protect our proprietary rights may not succeed in preventing infringement by others or ensure that these rights will provide us with a competitive advantage. Pending patent applications may not result in issued patents and the validity of issued patents may be subject to challenge. Third parties may also be able to design around the patented aspects of the products. Additionally, certain of the issued patents and patent applications are owned jointly with third parties. Because any owner or co-owner of a patent can license its rights under jointly-owned patents or applications, inventions made by us jointly with others are not subject to our exclusive control. Any of these possible events could result in losses of competitive advantage.

We depend on specific patents and licenses to technologies, and we will likely need additional technologies in the future that we may not be able to obtain.

We utilize technologies under licenses of patents from others for our products. These patents may be subject to challenge, which may result in significant litigation expense (which may or may not be recoverable against future royalty obligations). Additionally, we continually try to develop new products, and, in the course of doing

11

Table of Contents

so, we may be required to utilize intellectual property rights owned by others and may seek licenses to do so. Such licenses may not be obtainable on commercially reasonable terms, or at all. It is also possible that we may inadvertently utilize intellectual property rights held by others, which could result in substantial claims.

Intellectual property infringement claims against us could materially harm results of operations.

Our products incorporate a number of technologies, including high-temperature superconductor technology, technology related to other materials, and electronics technologies. Our patent positions, and that of other companies using high-temperature superconductor technology, is uncertain and there is significant risk that others, including our competitors or potential competitors, have obtained or will obtain patents relating to our products or technologies or products or technologies planned to be introduced by us.

We believe that patents may be or have been issued, or applications may be pending, claiming various compositions of matter used in our products. We may need to secure one or more licenses of these patents. There can be no assurances that such licenses could be obtained on commercially reasonable terms, or at all. We may be required to expend significant resources to develop alternatives that would not infringe such patents or to obtain licenses to the related technology. We may not be able to successfully design around these patents or obtain licenses to them and may have to defend ourselves at substantial cost against allegations of infringement of third party patents or other rights to intellectual property. In those circumstances, we could face significant liabilities and also be forced to cease the use of key technology.

Other parties may have the right to utilize technology important to our business.

We utilize certain intellectual property rights under non-exclusive licenses or have granted to others the right to utilize certain intellectual property rights licensed from a third party. Because we may not have the exclusive rights to utilize such intellectual property, other parties may be able to compete with us, which may harm our business.

Because competition for target employees is intense, we may be subject to claims of unfair hiring practices, trade secret misappropriation or other related claims.

Companies in HTS wire industries whose employees accept positions with competitors frequently claim that competitors have engaged in unfair hiring practices, trade secret misappropriation or other related claims. We may be subject to such claims in the future as we seek to hire qualified personnel, and such claims may result in material litigation. If this should occur, we could incur substantial costs in defending against these claims, regardless of their merits.

Our success depends on the attraction and retention of senior management and technical personnel with relevant expertise.

As a competitor in a highly technical market, we depend heavily upon the efforts of our existing senior management and technical teams. The loss of the services of one or more members of these teams could slow product development and commercialization objectives. Due to the specialized nature of our products, we also depend upon our ability to attract and retain qualified technical personnel with substantial industry knowledge and expertise. Competition for qualified personnel is intense, and we may not be able to continue to attract and retain qualified personnel necessary for the development of our business.

Regulatory changes could substantially harm our business.

Certain regulatory agencies in the United States and other countries set standards for operations within their territories. HTS wire is subject to a regulatory regime, which may become more strictly regulated if the market grows. Any failure or delay in obtaining necessary approvals could harm our business.

12

Table of Contents

We may acquire or make investments in companies or technologies that could cause loss of value to stockholders and disruption of business.

We may explore opportunities to acquire companies or technologies in the future. Other than the acquisition of Conductus, Inc. in 2002, we have not made any such acquisitions or investments to date and, therefore, our ability as an organization to make acquisitions or investments is unproven. An acquisition entails many risks, any of which could adversely affect our business, including:

In addition, future acquisitions may result in potentially dilutive issuances of equity securities, or the incurrence of debt, contingent liabilities or amortization expenses or charges related to goodwill or other intangible assets, any of which could harm our business. As a result, if we fail to properly evaluate and execute acquisitions or investments, our business and prospects may be seriously harmed.

If we are unable to implement appropriate controls and procedures to manage our potential growth, we may not be able to successfully offer our products and implement our business plan.

Our ability to successfully offer our products and implement our business plan in a rapidly evolving market requires an effective planning and management process. Growth in future operations would place a significant strain on management systems and resources. We expect that we would need to improve our financial and managerial controls, reporting systems and procedures, and would need to expand, train and manage our work force worldwide. Furthermore, we expect that we would be required to manage multiple relationships with various customers and other third parties.

Compliance with environmental regulations could be especially costly due to the hazardous materials used in the manufacturing process. In addition, we could incur expenditures related to hazardous material accidents.

We are subject to a number of federal, state and local governmental regulations related to the use, storage, discharge and disposal of toxic, volatile or otherwise hazardous chemicals used in our business. Current or future laws and regulations could require substantial expenditures for preventative or remedial action, reduction of chemical exposure, waste treatment or disposal. Any failure to comply with present or future regulations could result in the imposition of fines, suspension of production or interruption of operations. In addition, these regulations could restrict our ability to expand or could require us to acquire costly equipment or incur other significant expense to comply with environmental regulations or to clean up prior discharges.

In addition, although we believe that our safety procedures for the handling and disposing of hazardous materials comply with the standards prescribed by state and federal regulations, there is always the risk of accidental contamination or injury from these materials. To date, we have not incurred substantial expenditures for preventive action with respect to hazardous materials or for remedial action with respect to any hazardous materials accident, but the use and disposal of hazardous materials involves risk that we could incur substantial

13

Table of Contents

expenditures for such preventive or remedial actions. If such an accident were to occur, we could be held liable for resulting damages. The liability in the event of an accident or the costs of such remedial actions could exceed our resources or otherwise have a material adverse effect on our financial condition, results of operations or cash flows.

The reliability of market data included in our public filings is uncertain.

Since we operate in a rapidly changing market, we have in the past, and may from time to time in the future, include market data from industry publications and our own internal estimates in some of the documents we file with the Securities and Exchange Commission. The reliability of this data cannot be assured. Industry publications generally state that the information contained in these publications has been obtained from sources believed to be reliable, but that its accuracy and completeness is not guaranteed. Although we believe that the market data used in our filings with the Securities and Exchange Commission is and will be reliable, it has not been independently verified. Similarly, internal company estimates, while believed by us to be reliable, have not been verified by any independent sources.

Our international operations expose us to certain risks.

In 2007, we formed a joint venture with BAOLI to manufacture and sell our SuperLink interference elimination solution in China. In addition to facing many of the risks faced by our domestic business, if that joint venture or any other international operation we may have is to be successful, we (together with any joint venture partner) must recruit the necessary personnel and develop the facilities needed to manufacture and sell the products involved, learn about the local market (which may be significantly different from our domestic market), build brand awareness among potential customers and compete successfully with local organizations with greater market knowledge and potentially greater resources than we have. We must also obtain a number of critical governmental approvals from both the United States and the local country governments on a timely basis, including those related to any transfers of our technology. We must establish sufficient controls on any foreign operations to ensure that those operations are operated in accordance with our interests, that our intellectual property is protected and that our involvement does not inadvertently create potential competitors. There can be no assurance that these conditions will be met. Even if they are met, the process of building our international operations could divert financial resources and management attention from other business concerns. Finally, our international operations will also be subject to the general risks of international operations, such as:

Risks Related to Our Common Stock

Our stock price is volatile.

The market price of our common stock has been, and is expected to be, subject to significant volatility. The value of our common stock may decline regardless of our operating performance or prospects. Factors affecting our market price include:

14

Table of Contents

Recent events have caused stock prices for many companies, including ours, to fluctuate in ways unrelated or disproportionate to their operating performance. The general economic, political and stock market conditions that may affect the market price of our common stock are beyond our control. The market price of our common stock at any particular time may not remain the market price in the future.

If we fail to maintain the listing of our common stock with a U.S. national securities exchange, the liquidity of our common stock could be adversely affected.

On October 30, 2015, we received a letter from the Listing Qualifications Department of The Nasdaq Stock Market notifying us that the minimum bid price per share for our common stock fell below $1.00 for a period of 30 consecutive business days and that therefore we did not meet the minimum bid price requirement set forth in Nasdaq Listing Rule 5550(a)(2).

We have been provided 180 calendar days, or until April 27, 2016, to regain compliance with the minimum bid price requirement. In accordance with Rule 5810(c)(3)(A), we can regain compliance if at any time during the 180-day period the closing bid price of our common stock is at least $1.00 for a minimum of 10 consecutive business days. If by April 27, 2016, we cannot demonstrate compliance with the Rule 5550(a)(2), we may be eligible for additional time. To qualify for additional time, we will be required to meet the continued listing requirement for market value of publicly held shares and all other initial listing standards for The Nasdaq Capital Market, with the exception of the bid price requirement, and will need to provide written notice of our intention to cure the deficiency during the second compliance period. If we are not eligible for the second compliance period, then the Nasdaq Staff will provide notice that our securities will be subject to delisting. At such time, we may appeal the delisting determination to a Hearings Panel.

We continue to monitor the closing bid price of our common stock and may, if appropriate, consider implementing available options to regain compliance with the minimum bid price requirement. If our common stock is delisted by The Nasdaq Stock Market, our common stock may be eligible to trade in an over-the-counter market. Any such alternative would likely result in it being more difficult for us to raise additional capital through the public or private sale of equity securities and for investors to dispose of, or obtain accurate quotations as to the market value of, our common stock. In addition, there can be no assurance that our common stock would be eligible for trading on any such alternative exchange or markets.

We have a significant number of outstanding warrants and options, and future sales of the shares obtained upon exercise of these options or warrants could adversely affect the market price of our common stock.

As of December 31, 2015, we had outstanding options exercisable for an aggregate of 1,973,606 shares of common stock at a weighted average exercise price of $2.54 per share and warrants to purchase up to 57,451,915 shares of our common stock at a weighted average exercise price of $0.55 per share. We have registered the issuance of all the shares issuable upon exercise of the options and warrants, and they will be freely tradable by the exercising party upon issuance. The holders may sell these shares in the public markets from time to time, without limitations on the timing, amount or method of sale. As our stock price rises, the holders may exercise their warrants and options and sell a large number of shares. This could cause the market price of our common stock to decline.

15

Table of Contents

Our corporate governance structure may prevent our acquisition by another company at a premium over the public trading price of our shares.

It is possible that the acquisition of a majority of our outstanding voting stock by another company could result in our stockholders receiving a premium over the public trading price for our shares. Provisions of our restated certificate of incorporation, as amended our bylaws and of Delaware corporate law could delay or make more difficult an acquisition of our company by merger, tender offer or proxy contest, even if it would create an immediate benefit to our stockholders. For example, our restated certificate of incorporation does not permit stockholders to act by written consent, and our bylaws generally require ninety days advance notice of any matters to be brought before the stockholders at an annual or special meeting.

In addition, our board of directors has the authority to issue up to 2,000,000 shares of preferred stock and to determine the terms, rights and preferences of this preferred stock, including voting rights of those shares, without any further vote or action by the stockholders. At March 15, 2016, 1,383,727 shares of preferred stock remained unissued. The rights of the holders of common stock may be subordinate to, and adversely affected by, the rights of holders of preferred stock that may be issued in the future. The issuance of preferred stock could also make it more difficult for a third party to acquire a majority of our outstanding voting stock, even at a premium over our public trading price.

Furthermore, our certificate of incorporation also provides for a classified board of directors with directors divided into three classes serving staggered terms. These provisions may have the effect of delaying or preventing a change in control of us without action by our stockholders and, therefore, could adversely affect the price of our stock or the possibility of sale of shares to an acquiring person.

We do not anticipate declaring any cash dividends on our common stock.

We have never declared or paid cash dividends on our common stock and do not plan to pay any cash dividends in the near future. Our current policy is to retain all funds and earnings for use in the operation and expansion of our business.

Not applicable.

We lease all of our properties. All of our operations, including our manufacturing facilities, are located in industrial complexes in Santa Barbara, California and Austin, Texas. We occupy approximately 14,000 square feet in Santa Barbara, California and 94,000 square feet in Austin, Texas under long-term leases that expire in November 2016 and April 2017, respectively. Although we currently have excess capacity, we believe these facilities can be managed in a flexible and cost effective manner and are adequate to meet current and reasonably anticipated needs for approximately the next two years. Both leases contain renewal options.

From time to time, we are party to various lawsuits, claims and other legal proceedings that arise in the ordinary course of our business. Excluding ordinary, routine litigation incidental to our business, we are not currently a party to any legal proceedings that we believe would reasonably be expected to have a material adverse effect on our business, financial condition or results of operation or cash flow.

Not applicable.

16

Table of Contents

PART II

Market for Common Stock

Our common stock is traded on the NASDAQ Capital Market under the symbol “SCON.” The following table shows the high and low sales prices for our common stock as reported by NASDAQ for each calendar quarter in the last two fiscal years:

Holders of Record

We had 34 holders of record of our common stock on March 15, 2016. This number does not include stockholders for whom shares were held in a “nominee” or “street” name. We estimate that there are more than 5,000 beneficial owners of our common stock.

Dividends

We have never paid cash dividends and intend to employ all available funds in the development of our business. We have no plans to pay cash dividends in the near future.

Our ability to declare or pay dividends on shares of our common stock is subject to the requirement that we pay an equivalent dividend on each outstanding share of our Series A and Series B Preferred Stock (on an as-converted basis).

Sales of Unregistered Securities

We did not conduct any offerings of equity securities during the fourth quarter of 2015 that were not registered under the Securities Act of 1933.

Repurchases of Equity Securities

The following table summarizes repurchases of our common stock in the quarter ended December 31, 2015:

17

Table of Contents

Securities Authorized for Issuance Under Equity Compensation Plans

Equity Compensation Plan Information

Stock Performance Graph

The stock performance graph and related information presented below shall not be deemed “soliciting material” or “filed” with the Securities and Exchange Commission or subject to Regulation 14A or 14C under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), or to the liabilities of Section 18 of the Exchange Act, and shall not be deemed incorporated by reference into any filing under the Securities Act of 1933, as amended (the “Securities Act”), or the Exchange Act, except to the extent that we specifically request that such information be treated as soliciting material or specifically incorporate it by reference into such a filing.

18

Table of Contents

The graph and table below compare the cumulative total stockholders’ return on our common stock since December 31, 2010 with the Nasdaq Composite Index, and the Nasdaq Telecommunications Index over the same period (assuming the investment of $100 in our common stock and in the two other indices, and reinvestment of all dividends).

19

Table of Contents

The information set forth below is not necessarily indicative of results of future operations and should be read in conjunction with our Financial Statements and Notes thereto appearing in Item 15 of Part IV of this Report and “Management’s Discussion and Analysis of Financial Condition and Results of Operations”.

20

Table of Contents

This Management’s Discussion and Analysis of Financial Condition and Results of Operations includes many forward-looking statements. For cautions about relying on such forward looking statements, please refer to the section entitled “Forward Looking Statements” at the beginning of this Report immediately prior to Item 1.

General

We are a leading company in developing and commercializing high temperature superconductor (“HTS”) materials and related technologies. HTS materials can substantially improve the performance characteristics of electrical systems, reducing power loss, lowering heat generation, and decreasing electrical noise.

Results of Operations

2015 Compared to 2014

Net revenues consist primarily of commercial product revenues. Net revenues decreased by $388,000 or 61%, to $244,000 in 2015 from $632,000 in 2014. Sales of our new Conductus wire were equal to $47,000, or 19%, of our total revenue in 2015. Sales of our Conductus wire are expected to increase as we reach production scale in the second half of 2016 and beyond.

The decrease is the result of lower sales volume for our wireless communications products as we grow sales of our Conductus wire. We sell this legacy product to large North American wireless operators whose spending on 3G data networks, where our products are deployed, has become a secondary priority. Sales prices for wireless products were essentially unchanged in 2015 from 2014. Our two largest customers accounted for 80% of our net commercial revenues in 2015 and 83% of our net commercial revenues in 2014. These customers generally purchase products through non-binding commitments with minimal lead-times. Consequently, our commercial product revenues can fluctuate dramatically from quarter to quarter based on changes in our customers’ capital spending patterns. We do not anticipate that the revenues for our legacy products will be significant in the future.

Cost of commercial product revenues includes all direct costs, manufacturing overhead and provision for excess and obsolete inventories. The cost of commercial product revenues totaled $3.0 million for 2015 compared to $1.6 million for 2014, an increase of $1.4 million, or 88%. The higher costs resulted principally from increased manufacturing operating expenses and early low capacity operation and efforts to improve yields from our new large Conductus wire production equipment.

Our cost of revenues includes both variable and fixed cost components. The variable component consists primarily of materials, assembly and test labor, overhead, which includes equipment and facility depreciation, transportation costs and warranty costs. The fixed component includes test equipment and facility depreciation, purchasing and procurement expenses and quality assurance costs. Given the fixed nature of such costs, the absorption of our production overhead costs into inventory decreases and the amount of production overhead variances charged to cost of sales increases as production volumes decline since we have fewer units to absorb our overhead costs against. Conversely, the absorption of our production overhead costs into inventory increases and the amount of production overhead variances expensed to cost of sales decreases as production volumes increase since we have more units to absorb our overhead costs against. As a result, our gross profit margins generally decrease as revenue and production volumes decline due to lower sales volume and higher amounts of production overhead variances expensed to cost of sales; and our gross profit margins generally increase as our revenue and production volumes increase due to higher sales volume and lower amounts of production overhead variances expensed to cost of sales.

21

Table of Contents

The following is an analysis of our commercial product gross profit margins for 2015 and 2014:

We had a gross loss of $2.8 million in 2015 from the sale of our commercial products compared to a gross loss of $0.9 million in 2014. We experienced a gross loss in 2015 due to: increases in equipment depreciation, as we bring new Conductus wire equipment into service; our increased manufacturing efforts to bring our Conductus wire production to market and; our sales being insufficient to cover our overhead. To reduce our costs, in February 2015, we reduced our workforce and implemented certain other cost cutting measures. We also increased our legacy wireless inventory reserve by $58,000 during 2015, thus reducing this legacy inventory value to zero. As we emphasize improving manufacturing processes and increasing our yields at lower than optimal capacity, we expect gross losses to continue in the first half of 2016.

Research and development expenses relate to development of new wire products and new wire product manufacturing processes. In 2015, there were no new research and development efforts for our wireless commercial products. Research and development expenses totaled $4.1 million in 2015 compared to $6.0 million in 2014, a decrease of $1.9 million, or 32%. Our 2015 expenses were lower compared to 2014 as a result of our efforts moving from research and development to manufacturing of our new Conductus wire products.

Selling, general and administrative expenses totaled $5.8 million in 2015 compared to $5.4 million in 2014, an increase of $0.4 million or 7%. The higher expenses in 2015 were primarily the result of higher non-cash stock award expenses and were only partially offset by other cost saving efforts.

We had a gain from the adjustment to the fair value of warrant derivatives of $4.8 million in 2015 compared to a gain of $0.5 million in 2014. The primary reason for the gains was the drop in our stock price offset by the resulting effect of the reduction in the exercise price of certain warrants. This warrant liability is adjusted to fair value each reporting period, and any change in value is recognized in the statement of operations. In 2015, we also had a $0.5 million warrant revaluation expense from: (1) the revaluation of warrants just prior to their exercise due to the decrease in their exercise price; and (2) the revaluation of warrants due to our October 14, 2015 financing. See Note 5—Stockholders’ Equity: Warrants.

Interest income decreased to less than a $1,000 in both 2015 and 2014, primarily because of lower cash levels earning less interest.

Other income in 2015 and 2014 of $13,000 and $434,000, respectively, consisted of proceeds from the sale of equipment and expensed tooling related to our legacy wireless products.

Other expense in 2015 of $207,000 consisted of charges associated with the early termination of part of our Santa Barbara facilities lease.

Net loss totaled $8.6 million in 2015, compared to $8.3 million in 2014, an increase of $0.3 million, or 4%. The increase in net loss was principally the result of our Conductus wire revenue being insufficient to cover our increased cost of commercial product revenues as we ramp production.

The net loss available to common stockholders totaled $0.44 per common share in 2015, compared to $0.64 per common share in 2014, a decrease of $0.21, or 31%.

22

Table of Contents

2014 Compared to 2013

Net revenues consist primarily of commercial product revenues. Net revenues decreased by $1,078,000 or 63%, to $632,000 in 2014 from $1,710,000 in 2013. Sales of our Conductus wire were not a significant source of revenue in 2014.

The decrease is the result of lower sales volume for our wireless communications products. We sell this legacy product to large North American wireless operators whose spending on 3G data networks, where our products are deployed, has become a secondary priority. Sales prices for wireless products were essentially unchanged in 2014 from 2013. Our two largest customers accounted for 83% of our net commercial revenues in 2014 and 96% of our net commercial revenues in 2013. These customers generally purchase products through non-binding commitments with minimal lead-times. Consequently, our commercial product revenues can fluctuate dramatically from quarter to quarter based on changes in our customers’ capital spending patterns.

Cost of commercial product revenues includes all direct costs, manufacturing overhead and provision for excess and obsolete inventories. The cost of commercial product revenues totaled $1.6 million for 2014 compared to $1.1 million for 2013, an increase of $0.5 million, or 45%. The higher costs resulted principally from increased manufacturing operating expenses and early low capacity operation of our new large Conductus wire production equipment.

Our cost of sales includes variable and fixed cost components. The variable component consists primarily of materials, assembly and test labor, and overhead, which includes equipment and facility depreciation, transportation costs and warranty costs. The fixed component includes test equipment and facility depreciation, purchasing and procurement expenses and quality assurance costs. Given the fixed nature of such costs, the absorption of our production overhead costs into inventory decreases, and the amount of production overhead variances charged to cost of sales increases, as production volumes decline since we have fewer units to absorb our overhead costs against. Conversely, the absorption of our production overhead costs into inventory increases, and the amount of production overhead variances charged to cost of sales decreases, as production volumes increase since we have more units to absorb our overhead costs against. As a result, our gross profit margins generally decrease as revenue and production volumes decline due to lower sales volume and higher amounts of production overhead variances expensed to cost of sales; and our gross profit margins generally increase as our revenue and production volumes increase due to higher sales volume and lower amounts of production overhead variances charged to cost of sales. Our inventory is valued at the lower of its actual cost or the current estimated market value of the inventory. We review inventory quantities on hand and on order and record, on a quarterly basis, a provision for excess and obsolete inventory and/or vendor cancellation charges related to purchase commitments. If the results of the review determine that a write-down is necessary, we recognize a loss in the period in which the loss is identified, whether or not the inventory is retained.

The following is an analysis of our commercial product gross profit margins for 2014 and 2013:

We had a gross loss of $926,000 in 2014 from the sale of our commercial products compared to a gross margin of $659,000 in 2013. The gross loss in 2014 was primarily the result of increased manufacturing process and equipment operating costs as we begin initial operation this equipment well below capacity.

Research and development expenses relate to development of our new wire product and new wire product manufacturing processes. In 2014, there were no new research and development efforts for our wireless

23

Table of Contents

commercial products. Research and development expenses totaled $6.0 million in 2014 compared to $6.1 million in 2013, a decrease of $0.1 million, or 2%. Our 2014 expenses were lower compared to 2013 as a result of a transition of our efforts from research and development to manufacturing of our new Conductus wire products. Our 2013 expenses also included a $337,000 capital equipment obsolescence write-off.

Selling, general and administrative expenses totaled $5.4 million in 2014 compared to $5.1 million in 2013, an increase of $0.3 million or 6%. The lower expenses in 2013 resulted primarily from a refund of legal expenses associated with our Resonant LLC spin-out.

In 2014 we had a net gain of $3.1 million from the sale of our Resonant securities compared to a loss of $238,000 in 2013 from the fair value adjustment of our investment in Resonant.

In 2014 we had a gain of $480,000 from the fair value adjustment of our derivative warrants compared to a 2013 loss of $1,551,000. This warrant liability is adjusted to fair value each reporting period, and any change in value is recognized in the statement of operations.

Interest income decreased to less than a $1,000 in both 2014 and 2013, primarily because of lower cash levels earning less interest.

Other income in 2014 and 2013 of $434,000 and $140,000, respectively, consisted of proceeds from the sale of property and equipment.

Other expense in 2013 of $42,000 consisted of charges associated with the obsolescence of part of our Santa Barbara facility.

We had no interest expense in 2014 and 2013.

Our net loss totaled $8.3 million in 2014, compared to $12.2 million in 2013, a decrease of $3.9 million, or 32%. The decrease in net loss was principally the result of our $3.1 million gain realized from the sale of our investment in Resonant.

The net loss available to common stockholders totaled $0.64 per common share in 2014, compared to $1.71 per common share in 2013, a decrease of $1.07, or 62%.

Liquidity and Capital Resources

Cash Flow Analysis

As of December 31, 2015, we had working capital of $6.9 million, including $7.5 million in cash and cash equivalents, compared to negative working capital of $0.4 million at December 31, 2014, which included $1.2 million in cash and cash equivalents. We currently invest our excess cash in short-term, investment-grade, money-market instruments with maturities of three months or less. Our investments have no exposure to the auction rate securities market.

Cash and cash equivalents increased by $6.3 million from $1.2 million at December 31, 2014 to $7.5 million at December 31, 2015. In 2015, $8.5 million cash was used in operations. This use was offset by net cash proceeds of $14.9 million from the sale of our common shares and warrants.

In 2015 and 2014, net cash used in investing activities was $140,000 and $281,000, respectively. Our 2015 purchases of property and equipment of $141,000 was offset by $1,000 in sales, compared to our 2014 purchases of equipment for our Conductus wire initiative of $3.7 million offset by the sale of property and equipment of $96,000 and the $3.3 million net proceeds from the sale of our Resonant shares.

24

Table of Contents

Net cash was provided by three financing activities in 2015: (1) the February 2015 exercise of 916,858 outstanding warrants issued in connection with our August 2013 underwritten public offering provided net proceeds of $1.7 million; (2) the March 2015 direct sale of 3,062,790 shares of our common stock and 1,531,395 warrants provided net proceeds of $4.6 million; and (3) the October 2015, registered direct offering of 13,531,994 Class A Units of common stock and warrants and 4,750.0005 Class B Units (convertible, subject to certain limitations, into an aggregate of 13,571,430 shares of our common stock), raised net proceeds to us of $8.6 million. Net cash was used for the repurchase of 133,894 common shares from employees to satisfy $26,000 in tax withholding obligations.

Financing Activities

We have historically financed our operations through a combination of cash on hand, equipment lease financings, available borrowings under bank lines of credit and both private and public equity offerings.

Net cash was provided by three financing activities in 2015: (1) the exercise of 916,858 outstanding warrants issued in connection with our August 2013 underwritten public offering provided gross proceeds of $1.8 million and net proceeds of $1.7 million in the first quarter of 2015; (2) the March 2015 direct sale of 3,062,790 shares of our common stock and 1,531,395 warrants provided net proceeds of $4.6 million; and (3) the October 2015, registered direct offering of 13,531,994 Class A Units (consisting of one share of our common stock, a Series A warrant to purchase one share of our common stock at an exercise price equal to $0.35 (“Series A warrant”), and a Series B warrant to purchase 0.75 of a share of our common stock at an exercise price equal to $0.40 per share (“Series B warrant”)). The shares of common stock, Series A warrants and Series B warrants part of a Class A Unit were immediately separable and were issued separately in this offering. The sale of 13,531,994 Class A Units and 4,750.0005 Class B Units (convertible, subject to certain limitations, into an aggregate of 13,571,430 shares of our common stock), Series A warrants to purchase 27,103,424 shares of our common stock and Series B warrants to purchase 20,327,567 shares of our common stock raised gross proceeds to us of $9.5 million. The net proceeds to us from this offering, after deducting the placement agent fees and our offering expenses, were $8.6 million.

During 2014, financing activities totaled $4.1 million from the exercise of 1,589,471 outstanding warrants issued in connection with the above mentioned August 2013 offering.

We currently intend to use the net proceeds of these offerings for working capital and general corporate purposes. General corporate purposes may include repayment of debt and capital expenditures. In addition, we may use a portion of any net proceeds to acquire complementary products, technologies, or businesses.

Contractual Obligations and Commercial Commitments

We incur various contractual obligations and commercial commitments in our normal course of business. They consist of the following:

Operating Lease Obligations. Our operating lease obligations consist of facilities leases in Santa Barbara, California and Austin, Texas, as well as several smaller equipment leases.

Patents and Licenses. We have entered into a licensing agreement requiring royalty payments ranging from 0.5% to 1.0% of specified product sales. The agreement contains a provision for the payment of guaranteed or minimum royalty amounts. Typically, the licensor can terminate our license if we fail to pay minimum annual royalties.

Purchase Commitments. In the normal course of business, we incur purchase obligations with vendors and suppliers for the purchase of inventory, as well as other goods and services. These obligations are generally evidenced by purchase orders that contain the terms and conditions associated with the purchase arrangements. We are committed to accept delivery of such material pursuant to the purchase orders subject to

25

Table of Contents

various contract provisions that allow us to delay receipt of such orders or cancel orders beyond certain agreed upon lead times. Cancellations may result in cancellation costs payable by us.

Tabular Disclosure of Contractual Obligations. At December 31, 2015, we had the following contractual obligations and commercial commitments:

Capital Expenditures

We plan to invest in fixed assets during 2016 on an as-needed basis to enhance manufacturing our Conductus wire products. These expenditures are expected to not exceed $0.8 million.

Future Liquidity

In 2015, we incurred a net loss of $8.6 million and had negative cash flows from operations of $8.5 million. In 2014, we incurred a net loss of $8.3 million and had negative cash flows from operations of $10 million. Our independent registered public accounting firm has included in their audit reports for 2013 through 2015 an explanatory paragraph expressing substantial doubt about our ability to continue as a going concern.

At December 31, 2015 we had $7.5 million in cash. Our cash resources will not be sufficient to fund our business for the next twelve months. We believe the key factors to our future liquidity will be our ability to successfully use our expertise and our technology to generate revenues in various ways, including commercial operations, joint ventures, and licenses and we plan to leverage our leadership in superconducting technologies, extensive intellectual property, and HTS manufacturing expertise to develop and produce our Conductus wire.

We forecast that, after giving effect to the receipt of the proceeds from our 2015 financing activities and steps we have undertaken to reduce our ongoing operating costs through headcount reductions and other cost saving efforts, our cash resources will be sufficient to fund our planned operations into the fourth quarter of 2016. Unless we materially grow our revenues from commercial opportunities during 2016, we will need to raise additional capital to implement our current business plan and maintain our viability.

Net Operating Loss Carryforward

As of December 31, 2015, we had net operating loss carryforwards for federal and state income tax purposes of approximately $334.7 million and $150.5 million, respectively, which expire in the years 2018 through 2035. Of these amounts, $77.5 million and $5.1 million, respectively, resulted from the acquisition of Conductus. Under the Internal Revenue Code change of control limitations, a maximum of $38.3 million and $37.7 million, respectively, will be available for reduction of taxable income. In addition, we had research and development and other tax credits for federal and state income tax purposes of approximately $384,000 and $288,000, respectively, which expire in the years 2030 through 2035.

Due to the uncertainty surrounding their realization, we have recorded a full valuation allowance against our net deferred tax assets. Accordingly, no deferred tax asset has been recorded in the accompanying consolidated balance sheets.

26

Table of Contents

Section 382 of the Internal Revenue Code imposes an annual limitation on the utilization of net operating loss carryforwards based on a statutory rate of return (usually the “applicable federal funds rate”, as defined in the Internal Revenue Code) and the value of the corporation at the time of a “change of ownership” as defined by Section 382. We had changes in ownership in August 1999, December 2002, June 2009, and August 2013. In addition, we acquired the right to Conductus’ net operating losses, which are also subject to the limitations imposed by Section 382. Conductus underwent five ownership changes, which occurred in February 1999, February 2001, December 2002, June 2009, and August 2013. Therefore, the ability to utilize Conductus’ and our net operating loss carryforwards of $77.5 million and $232 million, respectively, which were incurred prior to the 2013 ownership changes, will be subject in future periods to annual limitations of $655,000. Net operating losses released from this limitation and/or incurred by us subsequent to the ownership changes and therefore not subject to this limitation totaled $27.1 million. An additional $655,000 in losses was released from limitation during the year under Section 382.

Market Risk

We are exposed to various market risks, including changes in interest rates. Market risk is the potential loss arising from adverse changes in market rates and prices. We do not enter into derivatives or other financial instruments for trading or speculation purposes. Our money market investments have no exposure to the auction rate securities market.

At December 31, 2015, we had approximately $7.0 million invested in a money market account yielding approximately 0.04%. Assuming no yield on this money market account and no liquidation of principal for the year, our total interest income would decrease by less than $3,000 per annum.

Inflation

We do not foresee any material impact on our operations from inflation.

Critical Accounting Policies and Estimates

Our discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. We continually evaluate our estimates, including those related to bad debts, inventories, recovery of long-lived assets, income taxes, warranty obligations, contract revenue and contingencies. We base our estimates on historical experience and on various other assumptions that we believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Any future changes to these estimates and assumptions could cause a material change to our reported amounts of revenues, expenses, assets and liabilities. Actual results may differ from these estimates under different assumptions or conditions.

On March 11, 2013, we effected a 1-for-12 reverse stock split of our common stock, or the Reverse Stock Split. As a result of the Reverse Stock Split, every twelve shares of our pre-Reverse Stock Split common stock were combined and reclassified into one share of our common stock. The Reverse Stock Split did not change the authorized number of shares or the par value of our common stock. Certain of the information contained in the documents incorporated by reference herein and therein present information on our common stock on a pre-Reverse Split basis. Share and per share data included herein has been retroactively restated for the effect of the reverse stock split. In addition, we identified certain critical accounting policies which affect certain of our more significant estimates and assumptions used in preparing our consolidated financial statements in this Annual Report on Form 10-K for 2015. We have not made any material changes to these policies.

27

Table of Contents

We believe the following critical accounting policies affect our more significant judgments and estimates used in the preparation of the consolidated financial statements. We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. We write down our inventory for estimated obsolescence or unmarketable inventory equal to the difference between the cost of inventory and the estimated market value based upon assumptions about future demand and market conditions. If actual market conditions are less favorable than those projected by management, additional inventory write-downs may be required.

Our inventory is valued at the lower of its actual cost or the current estimated market value of the inventory. We review inventory quantities on hand and on order and record, on a quarterly basis, a provision for excess and obsolete inventory and/or vendor cancellation charges related to purchase commitments. If the results of the review determine that a write-down is necessary, we recognize a loss in the period in which the loss is identified, whether or not the inventory is retained. Our inventory reserves establish a new cost basis for inventory and are not reversed until we sell or dispose of the related inventory. Such provisions are established based on historical usage, adjusted for known changes in demands for such products, or the estimated forecast of product demand and production requirements. Our business is characterized by rapid technological change, frequent new product development and rapid product obsolescence that could result in an increase in the amount of obsolete inventory quantities on hand. Demand for our products can fluctuate significantly. Our estimates of future product demand may prove to be inaccurate, and we may understate or overstate the provision required for excess and obsolete inventory.

Our net sales consist of revenue from sales of products, net of trade discounts and allowances. We recognize revenue when evidence of an arrangement exists, contractual obligations have been satisfied, title and risk of loss have been transferred to the customer and collection of the resulting receivable is reasonably assured. At the time revenue is recognized, we provide for the estimated cost of product warranties if allowed for under contractual arrangements and return products. Our warranty obligation is affected by product failure rates and service delivery costs incurred in correcting a product failure. Should such failure rates or costs differ from these estimates, accrued warranty costs would be adjusted.

We indemnify, without limit or term, our customers against all claims, suits, demands, damages, liabilities, expenses, judgments, settlements and penalties arising from actual or alleged infringement or misappropriation of any intellectual property relating to our products or other claims arising from our products. We have no known losses and we cannot reasonably develop an estimate of the maximum potential amount of payments that might be made under our indemnities because of the uncertainty as to whether a claim might arise and how much it might total.

Contract revenues are principally generated under research and development contracts. Contract revenues are recognized utilizing the percentage-of-completion method measured by the relationship of costs incurred to total estimated contract costs. If the current contract estimate were to indicate a loss, utilizing the funded amount of the contract, a provision would be made for the total anticipated loss. Contract revenues are derived primarily from research contracts with agencies of the United States Government. Credit risk related to accounts receivable arising from such contracts is considered minimal. These contracts include cost-plus, fixed price and cost sharing arrangements and are generally short-term in nature.

All payments to us for work performed on contracts with agencies of the U.S. Government are subject to adjustment upon audit by the Defense Contract Audit Agency. Based on historical experience and review of current projects in process, we believe that the audits will not have a significant effect on our financial position, results of operations or cash flows. The Defense Contract Audit Agency has audited us through 2006.

We periodically evaluate the realizability of long-lived assets as events or circumstances indicate a possible inability to recover the carrying amount. Long-lived assets that will no longer be used in our business are written off in the period identified since they will no longer generate any positive cash flows for us. Such evaluation is

28

Table of Contents

based on various analyses, including cash flow and profitability projections. The analyses necessarily involve significant management judgment. In the event the projected undiscounted cash flows are less than net book value of the assets, the carrying value of the assets will be written down to their estimated fair value. Our future cash flows may vary from estimates.

Stock-based employee compensation cost is recognized using the fair-value based method for all awards granted. We issue stock option awards and restricted share awards to employees and to non-employee directors under our stock-based incentive plans. The fair value of each option grant is estimated on the date of grant using the Black-Scholes option pricing model. Compensation cost related to restricted share awards is recorded based on the market price of our common stock on the grant date. We recognize compensation expense over the expected service period, generally the vesting period on a straight-line basis from the grant date.

Our valuation allowance against the deferred tax assets is based on our assessments of historical losses and projected operating results in future periods. If and when we generate future taxable income in the U.S. against which these tax assets may be applied, some portion or all of the valuation allowance would be reversed and an increase in net income would consequently be reported in future years.

See “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Market Risk.”

All information required by this item is listed in the Index to Financial Statements in Part IV, Item 15(a)1 of this Report.

Not applicable.

Disclosure Controls and Procedures; Changes in Internal Control Over Financial Reporting

We have established disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended). As of the end of the period covered by this report we carried out an evaluation under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of our disclosure controls and procedures pursuant to Rule 13a-15 of the Securities and Exchange Act of 1934, as amended. Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded, as of that time, that our disclosure controls and procedures are effective.

There were no changes in our internal controls over financial reporting during the fourth quarter of the year ended December 31, 2015 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

We do not expect that our disclosure controls and procedures or our internal controls will prevent all error and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, have been detected.

29

Table of Contents

Management’s Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over our financial reporting (as defined in Rule 13a-15(f) under the Securities Exchange Act of 1934, as amended). Our management assessed the effectiveness of our internal controls over financial reporting as of December 31, 2015. In making its assessment of the effectiveness of our internal controls over financial reporting, our management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control-Integrated Framework (2013). Based on these criteria, our management has concluded that, as of December 31, 2015, our internal control over financial reporting is effective.

This Report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. This Report was not subject to attestation by our registered public accounting firm pursuant to the rules of the Securities and Exchange Commission.

None.

30

Table of Contents

PART III

Directors and Executive Officers

The following table sets forth certain information regarding those individuals currently serving as our directors (or nominated to serve as a director) and executive officers as of March 15, 2016:

Each of our directors, including each of our current nominees, was nominated based on the assessment of our Nominating Committee and our Board that he has demonstrated: an ability to make meaningful contributions to our Board; independence; strong communication and analytical skills; and a reputation for honesty and ethical conduct. Our Board consists of, and seeks to continue to include, persons whose diversity of skills, experience and background are complementary to those of our other directors.

Martin A. Kaplan has served on our board since 2002 and was named Chairman of the Board in October 2010. From 2000 through 2012, Mr. Kaplan was Chairman of the Board of JDS Uniphase, Inc. (“JDSU”), a telecommunications equipment company, where he remained a director until August 2015. In August 2015, JDSU spun off its communications and commercial optical products business into the publicly-traded company Lumentum Holdings Inc., at which time Mr. Kaplan resigned from the JDSU Board and became Chairman of the Board of Lumentum Holdings Inc. In a career spanning 40 years, Mr. Kaplan last served as Executive Vice-President of the Pacific Telesis Group, which became a subsidiary of SBC Communications in 1997. Mr. Kaplan has served as a director of a number of other public and private companies. Mr. Kaplan earned a B.S. in engineering from California Institute of Technology. Our Board has determined that Mr. Kaplan is qualified to serve as a director because he has extensive business leadership and board experience.

Lynn J. Davis has served on our Board since 2005. He served as President, Chief Operating Officer and director of August Technology, a manufacturer of inspection equipment for the semiconductor fabrication industry from 2005 to 2006. From 2002 to 2004, he was a partner at Tate Capital Partners Fund, LLC, a private investment firm he co-founded. Prior to Tate, Mr. Davis was an employee of ADC Telecommunications for 28 years, serving in 14 management positions, including Corporate President, Group President and Chief Operating Officer. He is also Chairman of the Board of Directors of Flexsteel Industries Inc., a furniture manufacturer. Mr. Davis holds a B.S. in electrical engineering from Iowa State University and an M.B.A. from the University of Minnesota. Our Board has determined that Mr. Davis is qualified to serve as a director because he has extensive knowledge in various management roles in the telecommunications industry, including manufacturing, sales and marketing. In addition, as a venture capitalist, Mr. Davis has worked with smaller companies and brings a valuable entrepreneurial approach to management and compensation issues.

31

Table of Contents

Dan L. Halvorson joined our Board in March 2014. Mr. Halvorson is currently the Executive Vice President and Chief Financial Officer for OneRoof Energy, Inc., a technology finance provider for residential solar systems. Mr. Halvorson previously served as the Executive Vice President and Chief Financial Officer of Mandalay Digital Group, Inc. from September 2012 through December 2012 and Executive Vice President-Operations and Chief Financial Officer for DivX, Inc. from 2007 until its acquisition by Sonic Solutions in October 2010. Prior to joining DivX, he served at Novatel Wireless, Inc., from 2000 to 2007, most recently as its Chief Financial Officer. He was Director of Finance for Dura Pharmaceuticals, Inc. from 1988 to 2000, when the company was acquired by Elan Corporation, and Director of Finance for Alliance Pharmaceutical Corp. from 1996 to 1998. From 1988 to 1994, Mr. Halvorson was with Deloitte & Touche LLC, and subsequently, with PriceWaterhouseCoopers LLP from 1994 until he joined Alliance Pharmaceutical Corp. in 1996. Mr. Halvorson is a certified public accountant (inactive) and holds a Bachelor of Science in Business Administration and Accounting from San Diego State University. Our Board has determined that Mr. Halvorson is qualified to serve as a director because he has extensive knowledge about public and financial accounting matters.

Jeffrey A. Quiram has served on our Board, and has been our President and Chief Executive Officer, since 2005. From 1991 to 2004, Mr. Quiram served ADC Telecommunications in a variety of management roles, including Vice President of its wireless business unit. Mr. Quiram has a B.S. in Quantitative Methods and Computer Science from College of St. Thomas, and an M.B.A. from University of Minnesota. Our Board has determined that Mr. Quiram is qualified to serve as a director because he has extensive knowledge about product development, business planning, and complex manufacturing. In addition, he has extensive knowledge about our corporate operations and market activities from serving as our Chief Executive Officer.

William J. Buchanan has been our Chief Financial Officer since May 2010. Mr. Buchanan joined us in 1998 and served as our Controller from 2000 to May 2010. For 16 years prior to joining us, he was a self-employed private investor and investment advisor. For the nine years prior to that, he served in various executive and accounting positions with Applied Magnetics Corp and Raytheon Co. Mr. Buchanan holds a B.A. in Economics from California State University, Fresno.

Robert L. Johnson has been our Senior Vice President, Operations since 2004. Mr. Johnson joined us in 2000 as Vice President of Wireless Manufacturing. From 1996 to 2000, Mr. Johnson was the Director and General Manager of Schlumberger ATE. From 1990 to 1996, he served as Vice President and General Manager of Harman International Industries. Mr. Johnson studied industrial engineering at Arizona State University.

Adam L. Shelton has been our Vice President, Product Management and Marketing since 2006. From 2005 to 2006, Mr. Shelton was the Senior Director of Marketing for Motorola. From 2003 to 2005, he was the Senior Director of Marketing for Advanced Fibre Communications (AFC), now Tellabs. Mr. Shelton also held various management and executive management positions with Mahi Networks, ATU Communications and Bell Canada. Mr. Shelton graduated with dean’s honors as a Civil Engineering Technologist from Seneca College in Toronto, Canada.

Kenneth E. Pfeiffer has been our Vice President, Engineering since 2012. From 2009 to 2011, Mr. Pfeiffer was Vice President, Engineering at Veeco Instruments Inc. From 2006 to 2009, Mr. Pfeiffer was the Director of Equipment Engineering for HelioVolt Corporation. Prior to that, Mr. Pfeiffer held various engineering and management positions at Active Power, Inc. and Applied Materials, Inc. Mr. Pfeiffer obtained a B.S. Mechanical Engineering degree from Texas A&M University in 1990 and a M.S. Mechanical Engineering from the University of Texas in 1994. He also holds a Master’s in Business Administration degree from the University of Texas at Austin.

Corporate Governance Policies and Practices

The following is a summary of our corporate governance policies and practices:

32

Table of Contents

Board Leadership Structure and Role in Risk Oversight

Our Board’s current policy is to separate the role of Chairman of our Board and Chief Executive Officer. Our Board believes that this structure combines accountability with effective oversight. This structure also allows us to benefit from the experience and knowledge of our Chairman, who has been on our board since 2002, while reflecting the responsibilities and contributions of our Chief Executive Officer. In addition, we believe that the independence of our Chairman provides additional oversight over the decisions of our management and places additional control in the hands of our independent directors.

Our Board is actively involved in overseeing our risk management through our Audit Committee. Under its charter, our Audit Committee is responsible for inquiring of management and our independent auditors about significant areas of risk or exposure and assessing the steps management has taken to minimize such risks. Our Board’s role in risk oversight has not affected our Board’s determination that the separation of roles of Chairman and Chief Executive Officer is most appropriate for our company.

Stockholder Communications with Directors

Stockholders who want to communicate with our Board or with a particular director or committee may send a letter to our Secretary at Superconductor Technologies Inc., 9101 Wall Street, Suite 1300, Austin, Texas 78754. The mailing envelope should contain a clear notation indicating that the enclosed letter is a “Board Communication” or “Director Communication.” All such letters should state whether the intended recipients are all members of our Board or just certain specified individual directors or a specified committee. The Secretary will circulate the communications (with the exception of commercial solicitations) to the appropriate director or directors. Communications marked “Confidential” will be forwarded unopened.

Attendance at Annual Meetings of Stockholders

We expect that all of our Board members attend our Annual Meetings of Stockholders in the absence of a showing of good cause for failure to do so. All of the members of our Board attended our 2015 Annual Meeting of Stockholders.

Board Meetings and Committees

During 2015, each of our directors attended at least 75% of the aggregate of (i) the total number of Board meetings and (ii) the total number of meetings of the committees on which the director served.

33

Table of Contents

Board of Directors

Our Board held a total of five meetings during 2015. Our Board has three standing committees—an Audit Committee established in accordance with section 3(a)(58)(A) of the Securities Exchange Act of 1934 (our “Audit Committee”), a Compensation Committee (our “Compensation Committee”) and a Governance and Nominating Committee (our “Nominating Committee”). Our Audit Committee, Compensation Committee and Nominating Committee each have a charter, which is available at the “Corporate Governance” section under the “Investors” tab on our website at www.suptech.com.

Audit Committee

The principal functions of our Audit Committee are to hire our independent public auditors, to review the scope and results of the year-end audit with management and the independent auditors, to review our accounting principles and our system of internal accounting controls and to review our annual and quarterly reports before filing them with the SEC. Our Audit Committee met eight times during 2015. The current members of our Audit Committee are Messrs. Halvorson (Chairman), Kaplan and Davis.

Our Board has determined that all members of our Audit Committee are “independent” as defined under the rules of the SEC and the listing standards of NASDAQ. Our Board has determined that Mr. Halvorson is an “audit committee financial expert.”

Compensation Committee

Our Compensation Committee reviews and approves salaries, bonuses and other benefits payable to the executive officers and administers our management incentive plan. Our Compensation Committee makes all compensation decisions with respect to our Chief Executive Officer and then recommends these decisions to our Board for approval. Our Compensation Committee also makes recommendations to our Board regarding non-equity compensation and equity awards to our other named executive officers (set forth below under “Executive Compensation—Summary Compensation Table”) and all other elected officers. In doing so, with respect to named executive officers other than the Chief Executive Officer, our Compensation Committee generally receives a recommendation from our Chief Executive Officer and other officers as appropriate. Our Chief Executive Officer also generally recommends the number of options or other equity awards to be granted to executive officers, within a range associated with the individual executive’s salary level, and presents this to our Compensation Committee for its review and approval.

Our Compensation Committee uses available data to review and compare our compensation levels to market compensation levels, taking into consideration the other companies’ size, the industry, and the individual executive’s level of responsibility, as well as anecdotal data regarding the compensation practices of other employers. We periodically benchmark our executive and director compensation against publically available peer data. Our Compensation Committee does not generally hire an outside consulting firm to assist with compensation, as we believe that the value of doing so is exceeded by the costs. No compensation consultant was engaged to provide advice or recommendations on our executive or director compensation for 2015.

Our Compensation Committee also reviews the compensation of directors and recommends to our Board the amounts and types of cash to be paid and equity awards to be made to our directors.

Our Compensation Committee met four times during 2015. The current members of our Compensation Committee are Messrs. Davis (Chairman), Kaplan and Halvorson. Our Board has determined that all members of our Compensation Committee are “independent” as defined under the rules of the SEC and the listing standards of NASDAQ. Our Compensation Committee will only delegate its authority to the extent consistent with our certificate of incorporation and bylaws and applicable laws, regulations and listing standards.

34

Table of Contents

Our Compensation Committee created the Stock Option Committee (our “Stock Option Committee”) consisting of two members—our Compensation Committee Chairman and the Chief Executive Officer. The purpose of our Stock Option Committee is to facilitate the timely granting of stock options in connection with hiring, promotions and other special situations, and therefore our Stock Option Committee meets only periodically as certain events occur. Our Stock Option Committee is empowered to grant options to non-executive employees up to a preset annual aggregate limit (120,000 shares for 2015). The Stock Option Committee met once during 2015. Our Compensation Committee supervises these grants and retains exclusive authority for all executive officer grants and the annual employee grants. The current members of our Stock Option Committee are Messrs. Davis (Chairman) and Quiram.

Governance and Nominating Committee

Our Nominating Committee is responsible for overseeing and, as appropriate, making recommendations to our Board regarding, membership and constitution of our Board and its role in overseeing our affairs. Our Nominating Committee is responsible for proposing a slate of directors for election by the stockholders at each annual meeting and for proposing candidates to fill any vacancies. Our Nominating Committee is also responsible for the corporate governance practices and policies of our Board and its committees. The current members of our Nominating Committee are Messrs. Kaplan (Chairman), Davis, and Halvorson. Our Nominating Committee met four times in 2015. Our Board has determined that all members of our Nominating Committee are “independent” as defined under the rules of the SEC and the listing standards of NASDAQ.

Our Nominating Committee manages the process for evaluating current Board members at the time they are considered for re-nomination. After considering the appropriate skills and characteristics required on our Board, the current makeup of our Board, the results of the evaluations, and the wishes of our Board members to be re-nominated, our Nominating Committee recommends to our Board whether those individuals should be re-nominated.

Our Nominating Committee periodically reviews with our Board whether it believes our Board would benefit from adding a new member(s), and if so, the appropriate skills and characteristics required for the new member(s). If our Board determines that a new member would be beneficial, our Nominating Committee solicits and receives recommendations for candidates and manages the process for evaluating candidates. All potential candidates, regardless of their source (including candidates recommended by security holders), are reviewed under the same process. Our Nominating Committee (or its chair) screens the available information about the potential candidates. Based on the results of the initial screening, interviews with viable candidates are scheduled with Nominating Committee members, other members of our Board and senior members of management. Upon completion of these interviews and other due diligence, our Nominating Committee may recommend to our Board the election or nomination of a candidate.

Candidates for independent Board members have typically been found through recommendations from directors or others associated with us. Our stockholders may also recommend candidates by sending the candidate’s name and resume to our Nominating Committee under the provisions set forth above for communication with our Board. No such suggestions from our stockholders were received in time for our 2015 Annual Meeting.

Our Nominating Committee has no predefined minimum criteria for selecting Board nominees, although it believes that (i) all directors should share qualities such as: an ability to make meaningful contributions to our board; independence; strong communication and analytical skills; and a reputation for honesty and ethical conduct; and (ii) independent directors should share qualities such as: experience at the corporate, rather than divisional level, in multi-national organizations as large as or larger than us; and relevant, non-competitive experience. Our Nominating Committee does not have a formal policy with respect to diversity. However, our Nominating Committee and our Board believe that it is important that we have Board members whose diversity of skills, experience and background are complementary to those of our other Board members. In considering

35

Table of Contents

candidates for our Board, our Nominating Committee considers the entirety of each candidate’s credentials. In any given search, our Nominating Committee may also define particular characteristics for candidates to balance the overall skills and characteristics of our Board and our perceived needs. However, during any search, our Nominating Committee reserves the right to modify its stated search criteria for exceptional candidates.

SECTION 16(a) BENEFICIAL OWNERSHIP REPORTING COMPLIANCE

Section 16(a) of the Securities Exchange Act of 1934 requires our directors, executive officers and significant stockholders (defined by statute as stockholders beneficially owning more than 10% of our common stock) to file with the SEC initial reports of beneficial ownership, and reports of changes in beneficial ownership, of our common stock. Directors, executive officers and significant stockholders are required by SEC regulations to furnish us with copies of all Section 16(a) forms they file. Based solely on a review of the copies of Forms 3, 4 and 5 (and amendments thereto) filed with the SEC and submitted to us, and on written representations by certain directors and executive officers received by us, we believe that all of our executive officers, directors and significant stockholders complied with all applicable filing requirements under Section 16(a) during 2015, except Jeffrey A. Quiram, Martin A. Kaplan, Lynn J. Davis, Dan L. Halvorson, William J. Buchanan, Robert L. Johnson, Adam L. Shelton, Kenneth E. Pfeiffer each filed one late Form 4 on November 12, 2015 reporting a transaction on November 9, 2015.

36

Table of Contents

AUDIT COMMITTEE REPORT

The information contained in this Audit Committee Report shall not be deemed incorporated by reference in any filing under the Securities Act of 1933 or the Securities Exchange Act of 1934, whether made before or after the date hereof and irrespective of any general incorporation language in any such filing (except to the extent that we specifically incorporate this information by reference) and shall not otherwise be deemed “soliciting material” or “filed” with the SEC or subject to Regulation 14A or 14C, or to the liabilities of Section 18 of the Securities Exchange Act of 1934 (except to the extent that we specifically request that this information be treated as soliciting material or specifically incorporate this information by reference).

Our Audit Committee reviews our financial reporting process on behalf of our Board. Management has the primary responsibility for the financial statements and the reporting process, including the system of internal controls. Our Audit Committee has reviewed and discussed the audited financial statements with management. In addition, our Audit Committee has discussed with our independent registered public accounting firm the matters required to be discussed by Statements on Public Company Accounting Oversight Board Auditing Standard No. 16 “Communications with Audit Committees”.

Our Audit Committee has also received the written disclosures and the letter from our independent registered public accounting firm required by applicable requirements of the Public Company Accounting Oversight Board regarding their communications with the audit committee concerning independence, and has discussed with them their independence, including whether their provision of other non-audit services to us is compatible with maintaining their independence.

Our Audit Committee discussed with our independent registered public accounting firm the overall scope and plans for the audit. Our Audit Committee meets with them, with and without management present to discuss the results of their examinations, the evaluation of our internal controls and the overall quality of our reporting.

Based upon the review and discussions referred to in the foregoing paragraphs, our Audit Committee recommended to our Board that the audited financial statements be included in our Annual Report on Form 10-K for 2015 for filing with the Securities and Exchange Commission.

AUDIT COMMITTEE

Dan L. Halvorson (Chairman)

Martin A. Kaplan

Lynn J. Davis

37

Table of Contents

Summary Compensation Table

The following table sets forth for 2015, 2014 and 2013 the base salary and other compensation of our (i) President and Chief Executive Officer and (ii) our other two most highly compensated officers for 2015 (our “named executive officers”):

Narrative Disclosure to Summary Compensation Table

Employment Agreement

We entered into an employment agreement with Mr. Quiram in 2005, which was amended in 2007. The employment agreement provides for the following:

38

Table of Contents

Change of Control Agreements

We also have a “change of control” agreement with Mr. Shelton. The change of control agreement generally provide that, if the employee’s employment is terminated within twenty-four months of a “Change of Control” (as defined in the change of control agreement) either (i) by us for any reason other than death, “Cause” or “Disability” (as both terms are defined in the change of control agreement) or (ii) by the employee for “Good Reason” (as defined in the change of control agreements), then the terminated employee will be entitled to severance benefits, salary continuation payments and continuation of health/life insurance benefits for 18 months, and accelerated vesting for all outstanding unvested stock options and other equity securities held by the employee. Any payments or distributions made to or for the benefit of the named employee under the change of control agreement will be reduced, if necessary, to an amount that would result in no excise taxes being imposed under Internal Revenue Code Section 4999.

Non-Equity Incentive Compensation

We maintain a bonus plan for executive officers and selected other members of senior management. Under the plan, our Compensation Committee establishes financial and other pertinent objectives for the period and assigns each executive officer an annual target bonus amount based on a percentage of his or her base salary, which ranges from 20% to 100%. Our Compensation Committee also retains the authority to award discretionary bonuses for performance in other aspects of the business not covered by the established goals. In December 2014, our Compensation Committee decided, based on then-current economic conditions, to not establish financial performance targets under this plan for 2015 and to not award cash bonuses based on financial objectives in 2015. Our Compensation Committee did reserve its right to award discretionary bonuses if appropriate; however no bonuses were awarded for 2015.

Equity Grants

For 2015, we made the following grants of restricted stock awards and options to our named executive officers:

39

Table of Contents

Outstanding Equity Awards at Fiscal Year End

The following table sets forth certain information with respect to outstanding options and unvested shares of restricted stock on December 31, 2015:

Non-employee Director Compensation

Summary of Compensation

Our directors who are also our employees do not receive additional compensation for their service on our Board. Our Board maintains a written compensation policy for our non-employee directors. Each director other

40

Table of Contents

than our Chairman of the Board receives an annual cash retainer of $20,000, and our Chairman of the Board receives an annual cash retainer of $40,000. The annual cash retainer is paid bi-annually and requires that the director attend at least 75% of our Board meetings. Each director receives a $5,000 annual retainer for service as a member of our three standing committees. In addition, on the date of each annual meeting of stockholders, each director other than our Chairman of the Board receives an equity grant of 10,000 shares of our common stock, and our Chairman of the Board receives a grant of 15,000 shares. In addition to the foregoing equity grants, new directors receive an initial grant of 25,000 shares of our common stock on the date that they join our Board. Initial equity grants vest in three equal installments, on each anniversary of the grant date, and annual grants vest in two equal installments, on each anniversary of the grant date. Our Board provides an additional $15,000 annual retainer (which is paid bi-annually) as compensation for service as chairman of our Audit Committee and an additional $10,000 annual retainer for service as chairman of each of our Compensation Committee and Nominating Committee.

Non-employee directors do not receive compensation from us other than as a director or as committee member. There are no family relationships among our directors and executive officers.

The following table summarizes the compensation paid to our non-employee directors for 2015:

41

Table of Contents

The following table sets forth the beneficial ownership of our common stock as of March 15, 2016 by (i) each person known by us to be the beneficial owner of more than 5% of our outstanding common stock, (ii) each of our directors, (iii) each of our executive officers named in the table under “Executive Compensation — Summary Compensation Table,” and (iv) all of our directors and executive officers as a group. Except as otherwise indicated in the footnotes to the table, (i) the persons and entities named in the table have sole voting and investment power with respect to all shares beneficially owned, subject to community property laws where applicable, and (ii) the address of each person is c/o Superconductor Technologies Inc., 9101 Wall Street, Suite 1300, Austin, Texas 78754.

None.

Our Audit Committee regularly reviews and determines whether specific non-audit projects or expenditures with our independent registered public accounting firm, Marcum LLP, potentially affects its independence. Our Audit Committee’s policy is to pre-approve all audit and permissible non-audit services provided by Marcum

42

Table of Contents

LLP. Pre-approval is generally provided by our Audit Committee for up to one year, as detailed as to the particular service or category of services to be rendered, and is generally subject to a specific budget. Our Audit Committee may also pre-approve additional services of specific engagements on a case-by-case basis.

The following table sets forth the aggregate fees billed to us by Marcum LLP for 2015 and 2014, all of which were pre-approved by our Audit Committee:

43

Table of Contents

PART IV

(a) The following documents are filed as part of this Report:

1. Index to Financial Statements. Our consolidated financial statements and the Report of Marcum LLP, Independent Registered Public Accounting Firm are included in Part IV of this Report on the pages indicated:

2. Financial Statement Schedule Covered by the Foregoing Report of Independent Registered Public Accounting Firm.

All other schedules are omitted because they are not applicable or the required information is shown in the financial statements or the notes thereto.

3. Exhibits

44

Table of Contents

45

Table of Contents

46

Table of Contents

(b) Exhibits. See Item 15(a) above.

47

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of

Superconductor Technologies Inc.

We have audited the accompanying consolidated balance sheets of Superconductor Technologies Inc. (the “Company”) as of December 31, 2015 and 2014, and the related consolidated statements of operations, stockholders’ equity and cash flows for each of the three years in the period ended December 31, 2015. Our audits also included the consolidated financial statement schedule listed in the Index at Item 15(a)(2). These financial statements and schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Superconductor Technologies Inc. as of December 31, 2015 and 2014, and the consolidated results of their operations and their cash flows for each of the three years in the period ended December 31, 2015 in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, the related consolidated financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth herein.

The accompanying consolidated financial statements have been prepared in conformity with accounting principles generally accepted in the United States of America, which contemplate continuation of the company as a going concern. As discussed in Note 2 to the financial statements, the Company has incurred significant net losses since its inception, has an accumulated deficit of $290,970,000 and working capital deficit as of December 31, 2015, and expects to incur substantial additional losses and costs to sustain operations. Further, the Company’s ability to realize its investment in its infrastructure is dependent on market acceptance and realization of significant revenues from its new products. The foregoing matters raise substantial doubt about the Company’s ability to continue as a going concern. Management’s plans in regard to these matters are also described in Note 2. These financial statements do not include any adjustments that might result from the outcome of this uncertainty.

/s/ Marcum LLP

Los Angeles, CA

March 30, 2016

F-1

Table of Contents

SUPERCONDUCTOR TECHNOLOGIES INC.

CONSOLIDATED BALANCE SHEETS

See accompanying notes to the consolidated financial statements.

F-2

Table of Contents

SUPERCONDUCTOR TECHNOLOGIES INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

See accompanying notes to the consolidated financial statements.

F-3

Table of Contents

SUPERCONDUCTOR TECHNOLOGIES INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY