Annual Statements Open main menu

Commercial Vehicle Group, Inc. - Annual Report: 2017 (Form 10-K)


Table of Contents
 
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
Form 10-K
þ
Annual Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
or
¨
Transition report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
For the fiscal year ended December 31, 2017
 
Commission file number:
001-34365
 
COMMERCIAL VEHICLE GROUP, INC.
(Exact name of Registrant as specified in its charter)
Delaware
 
41-1990662
(State of Incorporation)
 
(I.R.S. Employer Identification No.)
 
 
7800 Walton Parkway
 
43054
New Albany, Ohio
 
(Zip Code)
(Address of Principal Executive Offices)
 
 
Registrant’s telephone number, including area code:
(614) 289-5360
 
Securities registered pursuant to Section 12(b) of the Act:
Title of Each Class
 
Name of exchange on which registered
Common Stock, par value $.01 per share
 
The NASDAQ Global Select Market
Securities registered pursuant to Section 12(g) of the Act:
None
 
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨      No  þ
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Schedule 15(d) of the Act.    Yes  ¨      No  þ
Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  þ      No  ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  þ      No  ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer  ¨            Accelerated filer  þ            Non-accelerated filer  ¨            Smaller reporting company  ¨
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨      No  þ
The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold on June 30, 2017, was $251,131,448.
As of March 12, 2018, 31,004,524 shares of Common Stock of the Registrant were outstanding.
Documents Incorporated by Reference
Information required by Items 10, 11, 12, 13 and 14 of Part III of this Annual Report on Form 10-K is incorporated by reference from the Registrant’s Proxy Statement for its annual meeting to be held May 17, 2018 (the “2018 Proxy Statement”).
 


Table of Contents

COMMERCIAL VEHICLE GROUP, INC.
Annual Report on Form 10-K
Table of Contents
 
 
 
Page
PART I
 
Item 1.
Item 1A.
Item 1B.
Item 2.
Item 3.
Item 4.
 
 
PART II
 
Item 5.
Item 6.
Item 7.
Item 7A.
Item 8.
Item 9.
Item 9A.
Item 9B.
 
 
PART III
 
Item 10.
Item 11.
Item 12.
Item 13.
Item 14.
 
 
PART IV
 
Item 15.

i

Table of Contents


CERTAIN DEFINITIONS
All references in this Annual Report on Form 10-K to the “Company”, “Commercial Vehicle Group”, “CVG”, “we”,“us”, and “our” refer to Commercial Vehicle Group, Inc. and its consolidated subsidiaries (unless the context otherwise requires).
FORWARD-LOOKING INFORMATION
This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended. For this purpose, any statements contained herein that are not statements of historical fact, including without limitation, certain statements under “Item 1 - Business” and “Item 7 - Management’s Discussion and Analysis of Financial Condition and Results of Operations” and located elsewhere herein regarding industry outlook, financial covenant compliance, anticipated effects of acquisitions, production of new products, plans for capital expenditures and our results of operations or financial position and liquidity, may be deemed to be forward-looking statements. Without limiting the foregoing, the words “believe”, “anticipate”, “plan”, “expect”, “intend”, “will”, “should”, “could”, “would”, “project”, “continue”, “likely”, and similar expressions, as they relate to us, are intended to identify forward-looking statements. The important factors discussed in “Item 1A - Risk Factors”, among others, could cause actual results to differ materially from those indicated by forward-looking statements made herein and presented elsewhere by management from time to time. Such forward-looking statements represent management’s current expectations and are inherently uncertain. Investors are warned that actual results may differ from management’s expectations. Additionally, various economic and competitive factors could cause actual results to differ materially from those discussed in such forward-looking statements, including, but not limited to, factors which are outside our control, such as risks relating to (i) general economic or business conditions affecting the markets in which we serve; (ii) our ability to develop or successfully introduce new products; (iii) risks associated with conducting business in foreign countries and currencies; (iv) increased competition in the medium- and heavy-duty, construction, agriculture, aftermarket, military, bus and other markets; (v) our failure to complete or successfully integrate additional strategic acquisitions; (vi) the impact of changes in governmental regulations on our customers or on our business; (vii) the loss of business from a major customer or the discontinuation of particular commercial vehicle platforms; (viii) our ability to obtain future financing due to changes in the lending markets or our financial position and (ix) our ability to comply with the financial covenants in our revolving credit facility and term loan facility. All subsequent written and oral forward-looking statements attributable to us or persons acting on our behalf are expressly qualified in their entirety by such cautionary statements.

ii

Table of Contents

PART I
Item 1.
Business
COMPANY OVERVIEW
Commercial Vehicle Group, Inc. (and its subsidiaries) is a leading supplier of a full range of cab related products and systems for the global commercial vehicle market, including the medium- and heavy-duty truck (“MD/HD Truck”) market, the medium- and heavy-construction vehicle market, and the military, bus, agriculture, specialty transportation, mining, industrial equipment and off-road recreational markets.
We have manufacturing operations in the United States, Mexico, United Kingdom, Czech Republic, Ukraine, China, India and Australia. Our products are primarily sold in North America, Europe, and the Asia-Pacific region.
Our products include seats and seating systems ("Seats"); trim systems and components ("Trim"); cab structures, sleeper boxes, body panels and structural components; mirrors, wipers and controls; and electric wire harness and panel assemblies designed for applications in commercial and other vehicles.
We are differentiated from automotive industry suppliers by our ability to manufacture low volume, customized products on a sequenced basis to meet the requirements of our customers. We believe our products are used by a majority of the North American MD/HD Truck and certain leading global construction and agriculture original equipment manufacturers (“OEMs”), which we believe creates an opportunity to cross-sell our products.
Our Long-term Strategy and Strategic Footprint
Refer to Item 7, Management's Discussion and Analysis of Financial Condition and Results of Operations.
SEGMENTS
Operating segments are defined as components of an enterprise that are evaluated regularly by the Company’s chief operating decision maker (“CODM”), which is our President and Chief Executive Officer. The Company has two reportable segments: the Global Truck and Bus Segment (“GTB Segment”) and the Global Construction and Agriculture Segment (“GCA Segment”). Each of these segments consists of a number of manufacturing facilities. Certain of our facilities manufacture and sell products through both of our segments. Each manufacturing facility that sells products through both segments is reflected in the financial results of the segment that has the greatest amount of revenues from that manufacturing facility. Our segments are more specifically described below.
The GTB Segment manufactures and sells the following products:
 
Seats, Trim, sleeper boxes, cab structures, structural components and body panels. These products are sold primarily to the MD/HD Truck markets in North America;
Seats to the truck and bus markets in Asia-Pacific and Europe;
Mirrors and wiper systems to the truck, bus, agriculture, construction, rail and military markets in North America;
Trim to the recreational and specialty vehicle markets in North America; and
Aftermarket seats and components in North America.

The GCA Segment manufactures and sells the following products:
 
Wire harness assemblies and Seats for construction, agricultural, industrial, automotive, mining and military industries in North America, Europe and Asia-Pacific;
Seats to the truck and bus markets in Asia-Pacific and Europe;
Wiper systems to the construction and agriculture markets in Europe;
Office seating in Europe and Asia-Pacific; and
Aftermarket seats and components in Europe and Asia-Pacific.
See Note 9 of the Notes to Consolidated Finance Statements under Item 8 Financial Statements and Supplementary Data for financial information presented by segment for each of the three years ended December 31, 2017, 2016 and 2015, including information on sales and long-lived assets by geographic area.
GLOBAL TRUCK AND BUS SEGMENT OVERVIEW
Global Truck and Bus Segment Products

1

Table of Contents


Set forth below is a brief description of our products manufactured in the GTB Segment and their applications.
Seats and Seating Systems.   We design, engineer and produce Seats for MD/HD Truck and bus applications. For the most part, our Seats are fully-assembled and ready for installation when they are delivered to the OEM. We offer a wide range of seats that include mechanical and air suspension seats, static seats, bus seats and military seats. As a result of our product design and product technology, we believe we are a leader in designing seats with convenience and safety features. Our Seats are designed to achieve a high level of operator comfort by adding a wide range of manual and power features such as lumbar support, cushion and back bolsters, and leg and thigh support. Our Seats are built to meet customer requirements in low volumes and produced in numerous feature combinations to form a full-range product line with a wide level of price points. We also manufacture seats, and parts and components for the aftermarket.
Trim Systems and Components.   We design, engineer and produce Trim for MD/HD Truck, and recreational and specialty vehicle applications. Our Trim products are used mostly for interior cabs of commercial vehicles as well as exterior components for commercial recreational and specialty vehicles. Our Trim products are designed to provide a comfortable and durable interior along with a variety of functional and safety features for the vehicle occupant. The wide variety of features that can be selected makes Trim a complex and specialized product category. Set forth below is a brief description of our principal products in the Trim category:
Trim Products.   Our trim products include door panels and other interior trim panels. Specific components include vinyl or cloth-covered appliqués ranging from a traditional cut and sew approach to a contemporary molded styling theme, armrests, map pocket compartments, and sound-reducing insulation.
Instrument Panels.   We produce and assemble instrument panels that can be integrated with the rest of the interior trim. The instrument panel is a complex system of coverings and foam, plastic and metal parts designed to house various components and act as a safety device for the vehicle occupant.
Headliners/Wall Panels.   Headliners and wall panels consist of a substrate and a finished interior layer made of fabrics and other materials. While headliners and wall panels are an important contributor to interior aesthetics, they also provide insulation from road noise and can serve as carriers for a variety of other components, such as visors, overhead consoles, grab handles, coat hooks, electrical wiring, speakers, lighting and other electronic and electrical products.
Storage Systems.   Our modular storage units and custom cabinetry are designed to improve comfort and optimize space for the operator. These storage systems are designed to be integrated with the interior trim.
Floor Covering Systems.   We have an extensive and comprehensive portfolio of floor covering systems and dash insulators. Carpet flooring systems generally consist of tufted or non-woven carpet with a thermoplastic backcoating. Non-carpeted flooring systems, used primarily in commercial and fleet vehicles, offer improved wear and maintenance characteristics.
Sleeper Bunks.   We offer a wide array of design choices for upper and lower sleeper bunks for heavy-duty trucks. All parts of our sleeper bunks can be integrated to match the rest of the interior trim.
Grab Handles and Armrests.   Our grab handles and armrests are designed and engineered with specific attention to aesthetics, ergonomics and strength.
Privacy Curtains.   We produce privacy curtains for use in sleeper cabs.
Plastics Decorating and Finishing.   We offer customers a wide variety of cost-effective finishes in paint, ultra violet, hard coating and customized industrial hydrographic films (simulated appearance of wood grain, carbon fiber, brushed metal, marbles, camouflage and custom patterns), paints and other interior and exterior finishes.
Cab Structures, Sleeper Boxes, Body Panels and Structural Components.     We design, engineer and produce complete cab structures, sleeper boxes, body panels and structural components for MD/HD Trucks. Set forth below is a brief description of our principal products in this category:
Cab Structures.   We design, manufacture and assemble complete cab structures. Our cab structures, which are manufactured from both steel and aluminum, are delivered fully assembled and primed for paint.
Sleeper Boxes.   We design, manufacture and assemble sleeper boxes that can be part of the overall cab structure or standalone assemblies depending on the customer application.
Bumper Fascias and Fender Liners.   We design and manufacture durable, lightweight bumper fascias and fender liners.

2

Table of Contents


Body Panels and Structural Components.   We produce a wide range of both steel and aluminum large exterior body panels and structural components for use in production of cab structures and sleeper boxes.
Mirrors, Wipers and Technical Controls.   We design, engineer and produce a variety of mirrors, wipers and controls used in commercial vehicles. Set forth below is a brief description of our principal products in this category:
Mirrors.   We offer a range of round, rectangular, motorized and heated mirrors and related hardware, including brackets, braces and side bars. We have introduced both road and outside temperature devices that can be mounted on the cab, integrated into the mirror face and the vehicle’s dashboard through our RoadWatch family of products.
Windshield Wiper Systems.   We offer application-specific windshield wiper systems and individual windshield wiper components.
Controls.   We offer a range of controls and control systems for window lifts, door locks and electric switch products.
Global Truck and Bus Segment Raw Materials and Suppliers
A description of the principal raw materials we utilize in our GTB Segment’s principal product categories is set forth below:

Seats and Seating Systems.   The principal raw materials used in our Seats include steel, resin-based products and foam products and are generally readily available and obtained from multiple suppliers under various supply agreements. Leather, vinyl, fabric and certain components are also purchased from multiple suppliers.
Trim Systems and Components.   The principal raw materials used in our Trim are resin and chemical products, foam, vinyl and fabric which are formed and assembled into end products. These raw materials are generally readily available from multiple suppliers.
Cab Structures, Sleeper Boxes, Body Panels and Structural Components.   The principal raw materials and components used in our cab structures, sleeper boxes, body panels and structural components are steel and aluminum. These raw materials are generally readily available and obtained from multiple suppliers.
Mirrors, Wipers and Controls.   The principal raw materials used to manufacture our mirrors, wipers and controls are steel, stainless steel, aluminum and rubber, which are generally readily available and obtained from multiple suppliers. We also purchase sub-assembled products, such as motors, for our wiper systems and mirrors.
Global Truck and Bus Segment Customers
The following is a summary of the GTB Segment’s significant revenues (figures are shown as a percentage of total GTB Segment revenue) by end market for each of the three years ended December 31:
 
2017
 
2016
 
2015
Medium- and Heavy-duty Truck OEMs
64%
 
62%
 
70%
Aftermarket and OE Service
19
 
18
 
15
Bus OEMs
7
 
8
 
6
Construction OEMs
2
 
2
 
2
Other
8
 
10
 
7
Total
100%
 
100%
 
100%
We believe we are a successful long-term supplier because of our comprehensive product offerings, leading brand names and product innovation. Our principal customers include A.B. Volvo, Daimler Trucks, PACCAR and Navistar, constituting a combined total of 74%, 73% and 79% of GTB Segment revenue for the years ended December 31, 2017, 2016 and 2015, respectively.
Our European and Asia-Pacific operations collectively contributed approximately 6%, 6% and 4% of the GTB Segment’s revenues for the years ended December 31, 2017, 2016 and 2015, respectively.
Global Truck and Bus Industry
Commercial Vehicle Market Overview.     Commercial vehicles are used in a wide variety of end markets, including local and long-haul commercial trucking, bus, construction, mining, agricultural, military, industrial, municipal, off-road recreation and specialty vehicle markets. The commercial vehicle supply industry can generally be separated into two categories: (1) sales to OEMs, in which products are sold in relatively large quantities directly for use by OEMs in new commercial and construction vehicles; and (2) aftermarket sales, in which products are sold as replacements to a wide range of original equipment service organizations, wholesalers, retailers and installers. In the OEM market, suppliers are generally divided into tiers - “Tier 1” suppliers

3

Table of Contents


that provide products directly to OEMs, and “Tier 2” and “Tier 3” suppliers that sell products principally to other suppliers for integration into those suppliers’ own product offerings. We are generally a Tier I supplier.
Our largest end market, the North American commercial truck industry, is supplied by medium- and heavy-duty commercial vehicle suppliers, as well as automotive suppliers. The commercial vehicle supplier industry is fragmented and comprised of several large companies and many smaller companies. In addition, the commercial vehicle supplier industry is characterized by relatively low production volumes and can have considerable barriers to entry, including the following: (1) specific technical and manufacturing requirements, (2) high transition costs to shift production to new suppliers, (3) just-in-time delivery requirements and (4) strong brand name recognition. Foreign competition is growing with the globalization of the world economy.
Although OEM demand for our products is directly correlated with new vehicle production, suppliers like us can grow by increasing sales through the cross selling and bundling of products, further penetrating existing customers’ businesses, gaining new customers, expanding into new geographic markets, developing new content in our products to meet changing customer needs and by increasing aftermarket sales. We believe that companies with a global presence, advanced technology, engineering and manufacturing and support capabilities, such as our company, are well positioned to take advantage of these opportunities.
North American Commercial Truck Market.    Purchasers of commercial trucks include fleet operators, owner operators, governmental agencies and industrial end users. Commercial vehicles used for local and long-haul commercial trucking are generally classified by gross vehicle weight. Class 8 vehicles are trucks with gross vehicle weight in excess of 33,000 lbs. and Classes 5 through 7 vehicles are trucks with gross vehicle weight from 16,001 lbs. to 33,000 lbs. The following table shows production levels (in thousands of units) of commercial vehicles used for local and long-haul commercial trucking from 2013 through 2017 in North America:
 
2013
 
2014
 
2015
 
2016
 
2017
Class 8 trucks
246
 
297
 
323
 
228
 
256
Class 5-7 trucks
201
 
226
 
237
 
233
 
249
Source: ACT N.A. (February 2018).
The following describes the major markets within the commercial vehicle market in which the GTB Segment competes:
Class 8 Truck Market.     The global Class 8 ("Class 8" or "heavy-duty") truck manufacturing market is concentrated in three primary regions: North America, Europe and Asia-Pacific. The global Class 8 truck market is localized in nature due to the following factors: (1) the prohibitive costs of shipping components from one region to another, (2) the high degree of customization to meet the region-specific demands of end-users, and (3) the ability to meet just-in-time delivery requirements. According to ACT Research, four companies represented approximately 98% of North American Class 8 truck production in 2017. The percentages of Class 8 production represented by Daimler, PACCAR, A.B. Volvo, and Navistar were approximately 41%, 30%, 15%, and 12%, respectively, in 2017. We supply products to all of these OEMs.
New Class 8 truck demand has historically been cyclical and is particularly sensitive to economic factors that generate a significant portion of the freight tonnage hauled by commercial vehicles.
The following table illustrates North American Class 8 truck build for the years 2015 to 2022:

cvgi-123120_chartx03882.jpg
“E” — Estimated
Source: ACT (February 2018).
Class 5-7 Truck Market. North American Class 5-7 ("Class 5-7" or "medium-duty") includes recreational vehicles, buses and medium-duty trucks. We primarily participate in the Class 6 and 7 medium-duty truck market. The medium-duty market is influenced

4

Table of Contents


by overall economic conditions but has historically been less cyclical than the North American Class 8 truck market, with highs and lows generally not as pronounced as the Class 8 truck market. As the North American truck fleet companies move to a distribution center model, requiring less long-haul freight vehicles, the demand for medium-duty trucks may increase.
The following table illustrates the North American Class 5-7 truck build for the years 2015 through 2022:
cvgi-123120_chartx05373.jpg
“E” — Estimated
Source: ACT (February 2018).
We believe the following factors are primarily responsible for driving the North American Class 8 truck market:
Economic Conditions.     The North American truck industry is directly influenced by overall economic conditions and consumer spending. Since heavy-duty truck OEMs supply the fleet operators, their production levels generally reflect the demand for freight and the fleet operators' access to capital.
Truck Replacement Cycle and Fleet Aging.    The average age of the U.S. Class 8 truck population is approximately 11.3 years in 2017. The average fleet age tends to run in cycles as freight companies permit their truck fleets to age during periods of lagging demand and then replenish those fleets during periods of increasing demand. As truck fleets age, maintenance costs typically increase. Freight companies evaluate the economics between repair and replacement as well as the potential to utilize more cost-effective technology in vehicles. The chart below illustrates the approximate average age of the U.S. Class 8 truck population:
cvgi-123120_chartx06506.jpg
“E” — Estimated
Source: ACT (February 2018).
Commercial Truck Aftermarket.     The GTB Segment sells aftermarket products primarily in North America. Demand for aftermarket products is driven by the quality of OEM parts, the number of vehicles in operation, the average age of the vehicle fleet, the content and value per vehicle, vehicle usage and the average useful life of vehicle parts. Aftermarket sales tend to be at a higher margin. The recurring nature of aftermarket revenue can be expected to provide some insulation to the overall cyclical nature of the industry as it tends to provide a more stable stream of revenues. Brand equity and the extent of a company’s distribution network also contribute to the level of aftermarket sales. We believe CVG has a widely recognized brand portfolio and participates in most retail sales channels including Original Equipment Dealer networks and independent distributors.
GLOBAL CONSTRUCTION AND AGRICULTURE SEGMENT OVERVIEW

5

Table of Contents


Global Construction and Agriculture Segment Products
Set forth below is a brief description of our products manufactured in the GCA Segment and their applications.
Electric Wire Harnesses and Panel Assemblies.     We produce a wide range of electric wire harnesses and electrical distribution systems, and related assemblies. Set forth below is a brief description of our principal products in this category:
Electric Wire Harnesses.     We offer a broad range of electric wire harness assemblies that function as the primary electric current carrying devices used to provide electrical interconnections for gauges, lights, control functions, power circuits, powertrain and transmission sensors, emissions systems and other electronic applications on commercial vehicles. Our wire harnesses are customized to fit specific end-user requirements, and can be complex. We provide our wire harnesses for a variety of commercial and other vehicles.
Panel Assemblies.     We assemble integrated components such as panel assemblies and cabinets that are installed in a vehicle or unit of equipment and may be integrated with our wire harness assemblies. These components provide the user control over multiple operational functions and features.
Seats and Seating Systems.     We design, engineer and produce Seats predominately for the construction, agriculture and military markets. For the most part, our Seats are fully-assembled and ready for installation when they are delivered to the OEM. We offer a wide range of Seats that include mechanical and air suspension seats and static seats, as well as seat frames. As a result of our product design and product technology, we believe we are a leader in designing seats with convenience and enhanced safety features. Our Seats are designed to achieve a high level of operator comfort by adding a range of manual and power features such as lumbar support, cushion and back bolsters and leg and thigh support. Our Seats are built to meet customer requirements in low volumes and produced in numerous feature combinations to form a full-range product line with a wide level of price points. We also manufacture seats, parts and components for the aftermarket.
Office Seating.     We design, engineer and produce office seating products. Our office chair was developed as a result of our experience supplying seats for the heavy-duty truck, agricultural and construction industries and is fully adjustable to achieve a high comfort level. Our office chairs are designed to suit different office environments including heavy usage environments, such as emergency services, call centers, reception areas, studios and general office environments.
Wipers Systems.     We design, engineer and produce a variety of wipers used in commercial vehicles. We offer application-specific windshield wiper systems and individual windshield wiper components.
Global Construction and Agriculture Segment Raw Materials and Suppliers
A description of the principal raw materials we utilize in GCA Segment’s principal product categories is set forth below:

Electric Wire Harnesses and Panel Assemblies.    The principal raw materials used to manufacture our electric wire harnesses are wire and cable, connectors, terminals, switches, relays and various covering techniques involving braided yarn, braided copper, slit and non-slit conduit and molded foam. These raw materials are obtained from multiple suppliers and are generally available, although we have experienced and continue to experience a shortage of certain of these raw materials.
Seats and Seating Systems.    The principal raw materials used in our seating systems include steel, die-cast aluminum, resin-based products and foam products and are generally readily available and obtained from multiple suppliers under various supply agreements. Leather, vinyl, fabric and certain other components are also readily available to be purchased from multiple suppliers under supply agreements.
Wiper Systems.    The principal raw materials used to manufacture our wipers are steel, stainless steel and rubber, which are generally readily available and obtained from multiple suppliers. We also purchase sub-assembled products such as motors for our wiper systems.
Global Construction and Agriculture Segment’s Customers
The following is a summary of the GCA Segment’s significant revenues (figures are shown as a percentage of total GCA Segment revenue) by end market based for each of the three years ended December 31:

6

Table of Contents


 
2017
 
2016
 
2015
Construction
52
%
 
47
%
 
52
%
Automotive
13

 
14

 
14

Aftermarket and OE Service
12

 
16

 
16

Truck
8

 
8

 
5

Military
5

 
5

 
3

Agriculture
3

 
3

 
3

Other
7

 
7

 
7

Total
100
%
 
100
%
 
100
%
We believe we are a successful long-term supplier because of our comprehensive product offerings and product innovation services. Our principal customers include Caterpillar and John Deere, constituting a combined total of 36%, 33% and 37% of GCA Segment revenue for the years ended December 31, 2017, 2016 and 2015, respectively.
Our European and Asia-Pacific operations collectively contributed approximately 62%, 63% and 57% of our revenues for the years ended December 31, 2017, 2016 and 2015, respectively.
Global Construction and Agriculture Industry
Commercial Construction Vehicle Market.     New vehicle demand in the global construction equipment market generally follows certain economic conditions including GDP, infrastructure investment, housing starts, business investment, oil and energy investment and industrial production around the world. Within the construction market, there are two classes of construction equipment markets: the medium and heavy construction equipment market (weighing over 12 metric tons) and the light construction equipment market (weighing below 12 metric tons). Our construction equipment products are primarily used in the medium and heavy construction equipment markets, with a growing emphasis on light and utility machines. The platforms that we generally participate in include: cranes, pavers, planers & profilers, dozers, loaders, graders, haulers, tractors, excavators, backhoes, material handling and compactors. Demand in the medium and heavy construction equipment market is typically related to the level of larger-scale infrastructure development projects such as highways, dams, harbors, hospitals, airports and industrial development as well as activity in the mining, forestry and other raw material based industries.
Purchasers of medium and heavy construction equipment include construction companies, municipalities, local governments, rental fleet owners, quarrying and mining companies and forestry related industries. Purchasers of light construction equipment include contractors, rental fleet owners, landscapers, logistics companies and farmers. In the medium and heavy construction equipment market, we primarily supply OEMs with our wire harness and seating products.
Agricultural Equipment Market.     We market most of our products for small, medium and large agricultural equipment across a spectrum of machines including tractors, sprayers, bailers, farm telehandler equipment and harvesters. Sales and production of these vehicles can be influenced by rising or falling farm commodity prices, land values, profitability, and other factors such as increased mechanization in emerging economies and new uses for crop materials such as biofuels and other factors. In the medium to longer term, a combination of factors create the need for more productive agricultural equipment, such as: (1) population growth, (2) an evolving sophistication of dietary habits, and (3) constraints on arable land and other macroeconomic and demographic factors.
Military Equipment Market.     We supply products for heavy- and medium-payload tactical trucks that are used by various military customers. Military equipment production is particularly sensitive to political and governmental budgetary considerations.
OUR CONSOLIDATED OPERATIONS
Competitive Strengths
Generally, the barriers to entry in our industries include investment, specific engineering requirements, transition costs for OEMs to shift production to new suppliers, just-in-time delivery requirements and brand name recognition. Our competitive strengths include the following:
Market Positions and Brands.    We believe we have a strong market position supplying Seats and a good market position supplying Trim products to the North American MD/HD Truck market. Our market position in the North American MD/HD Truck market leads us to believe we have processes in place to design, manufacture and introduce products that meet customers’ expectations in that market. We also believe we are competitive as a global supplier of construction vehicle Seats. Our major product brands

7

Table of Contents


include CVG, Sprague Devices®, Moto Mirror®, RoadWatch®, KAB Seating, National Seating, Bostrom Seating®, Stratosand FinishTEK.
Comprehensive Cab Product and Cab System Solutions.    We manufacture a broad base of products utilized in the interior and the exterior of commercial vehicle cabs. We believe the breadth of our product offerings provide us with a potential opportunity for further customer penetration through cross-selling initiatives and by bundling our products to provide complete system solutions.
End-User Focused Product Innovation.    Commercial vehicle OEMs focus on interior and exterior product design features that better serve the vehicle operator and therefore seek suppliers that can provide product innovation. Accordingly, we have engineering, and research and development capabilities to assist OEMs in meeting those needs. We believe this helps us secure content on new as well as current platforms and models.
Flexible Manufacturing Capabilities.    Because commercial vehicle OEMs permit their customers to select from an extensive menu of cab options, our end users frequently request modified products in low volumes within a limited time frame. We can leverage our flexible manufacturing capabilities to provide low volume, customized products to meet styling, cost and just-in-time delivery requirements. We manufacture or assemble our products at facilities in North America, Europe and in the Asia-Pacific region.
Global Capabilities.    We have sales, engineering, manufacturing and assembly capabilities in North America, Europe and the Asia-Pacific region that provide a high level of service to our customers who manufacture and sell their products on a global basis.
Relationships with Leading Customers and Major North American Fleets.    We have comprehensive product offerings, brand names and product features that enable us to be a global supplier to many of the leading MD/HD Truck, construction and specialty commercial vehicle manufacturers such as PACCAR, Caterpillar, Volvo/Mack, Navistar, Daimler Trucks, John Deere, Oshkosh Corporation, Komatsu and Škoda (part of the Volkswagen Group). In addition, we maintain relationships with the major MD/HD Truck fleet organizations that are end-users of our products such as Schneider National, Werner, Walmart, FedEx and JB Hunt.
Management Team.    We believe that our management team has substantial knowledge of our customer needs and expertise in critical operational areas, and has a demonstrated ability to manage costs, improve processes and expand revenue through product, market, geography and customer diversification.
Research and Development
Our research and development capabilities offer quality and technologically advanced products to our customers at competitive prices. We offer industrial engineering, product design, specialized simulation and testing and evaluation services that are necessary in today’s global markets. Our capabilities in acoustics, thermal efficiency, benchmarking, multi-axis durability, biomechanics, comfort, prototyping and process prove-out allow us to provide complete integrated solutions for the end-user.
We engage in global engineering, and research and development activities that improve the reliability, performance and cost-effectiveness of our existing products and support the design and development and testing of new products for existing and new applications. We have test and validation engineering centers in North America, Europe and Asia. We have developed a global engineering support center in India to provide a cost-effective global engineering resource to all of our seat facilities.
We believe we are staffed with experienced engineers and have equipment and technology to support early design involvement that results in products that timely meet or exceed the customer’s design and performance requirements, and are more efficient to manufacture. Our ability to support our products and customers with extensive involvement enhances our position for bidding on such business. We work aggressively to ensure that our quality and delivery metrics distinguish us from our competitors.
Generally, we work with our customers’ engineering and development teams at the beginning of the concept design process for new components and assemblies and systems, or the re-engineering process for existing components and assemblies, in order to leverage production efficiency and quality. Our customers are continuously searching for advanced products while maintaining cost, quality and performance deliverables.
Research and development costs for the years ended December 31, 2017, 2016 and 2015 totaled $7.7 million, $7.0 million and $7.4 million, respectively.

8

Table of Contents


Intellectual Property
Our principal intellectual property consists of product and process technology U.S. and foreign patents, trade secrets, trademarks and copyrights. Although our intellectual property is important to our business operations and in the aggregate constitutes a valuable asset, we do not believe that any single patent, trade secret, trademark or copyright, or group of patents, trade secrets, trademarks or copyrights is critical to the success of our business. Our policy is to seek statutory protection for all significant intellectual property embodied in patents, trademarks and copyrights.
Our major brands include CVG, Sprague Devices®, Moto Mirror®, RoadWatch®, KAB Seating, National Seating, Bostrom Seating®, Stratosand FinishTEK. We believe that our brands are valuable, but that our business is not dependent on any one brand. We own U.S. federal trademark registrations for several of our products.
Manufacturing Processes
A description of the manufacturing processes we utilize for each of our principal product categories is set forth below:

Seats and Seating Systems.    Our Seats utilize a variety of manufacturing techniques whereby foam and various other components along with fabric, vinyl or leather are affixed to an underlying seat frame. We also manufacture and assemble seat frames.
Trim Systems and Components.    Our Trim capabilities include injection molding, low-pressure injection molding, urethane molding and foaming processes, compression molding, heavy-gauge thermoforming and vacuum forming as well as various cutting, sewing, trimming and finishing methods.
Cab Structures, Sleeper Boxes, Body Panels and Structural Components.    We utilize a wide range of manufacturing processes to produce our cab structures, sleeper boxes, body panels and structural components and utilize robotic and manual welding techniques in the assembly of these products. We have facilities with large capacity, fully automated E-coat paint priming systems thereby allowing us to provide our customers with a paint-ready cab product. Due to their high cost, full body E-coat systems, such as ours, are rarely found outside of the manufacturing operations of the major OEMs.
Mirrors, Wipers and Controls.    We manufacture our mirrors, wipers and controls utilizing a variety of manufacturing processes and techniques. Our mirrors, wipers and controls are primarily assembled utilizing semi-automatic work cells, electronically tested and then packaged.
Electric Wire Harnesses and Panel Assemblies.    We utilize several manufacturing techniques to produce our electric wire harnesses and panel assemblies. Our processes, manual and automated, are designed to produce a wide range of wire harnesses and panel assemblies in short time frames. Our wire harnesses and panel assemblies are electronically and hand tested.
We have a broad array of processes to enable us to meet our OEM customers’ styling and cost requirements. The vehicle cab is the most significant and appealing aspect to the operator of the vehicle; each commercial vehicle OEM therefore has unique requirements as to feel, appearance and features.
The end markets for our products can be highly specialized and our customers frequently request modified products in low volumes within an expedited delivery timeframe. As a result, we primarily utilize flexible manufacturing cells at our production facilities. Manufacturing cells are clusters of individual manufacturing operations and work stations. This provides flexibility by allowing efficient changes to the number of operations each operator performs. When compared to the more traditional, less flexible assembly line process, cell manufacturing allows us to better maintain our product output consistent with our OEM customers’ requirements and minimize the level of inventory.
When an end-user buys a commercial vehicle, the end-user may specify the seat and other features for that vehicle. Because our Seats are unique, our manufacturing facilities have significant complexity which we manage by building in sequence. We build our Seats as orders are received, and the Seats are delivered to our customer’s rack in the sequence in which vehicles come down the assembly line. We have systems in place that allow us to provide complete customized interior kits in boxes that are delivered in sequence. Sequencing reduces our cost of production because it eliminates warehousing costs and reduces waste and obsolescence, offsetting any increased labor costs. Several of our manufacturing facilities are strategically located near our customers’ assembly plants, which facilitates this process and minimizes shipping costs.
We employ just-in-time manufacturing and sourcing in our operations to meet customer requirements for faster deliveries and to minimize our need to carry significant inventory levels. We utilize material systems to manage inventory levels and, in certain locations, we have inventory delivered as often as two times per day from a nearby facility based on the previous day’s order, which reduces the need to carry excess inventory at our facilities.

9

Table of Contents


Within our cyclical industries, we strive to maintain a certain portion of temporary labor to improve our ability to flex our costs and throughput as required by fluctuating customer demand. We engage our core employees to assist in making our processes efficient.
Seasonality
OEMs close their production facilities around holidays or when demand drops, reducing work days. Our cost structure, to the extent it is variable, provides us with some flexibility during these periods.
Our Supply Agreements
Our supply agreements generally provide for fixed pricing but do not require us to purchase any specified quantities. Normally we do not carry inventories of raw materials or finished products in excess of those reasonably required to meet production and shipping schedules, as well as service requirements. Steel, aluminum, petroleum-based products, copper, resin, foam, fabrics, wire and wire components comprise the most significant portion of our raw material costs. We typically purchase steel, copper and petroleum-based products at market prices that are fixed over varying periods of time. Due to the volatility in pricing over the last several years, we use methods such as market index pricing and competitive bidding to assist in reducing our overall cost. We strive to align our customer pricing and material costs to minimize the impact of steel, copper and petrochemical price fluctuations. Certain component purchases and suppliers are directed by our customers, so we generally will pass through directly to the customer any cost changes from these components. We generally are not dependent on a single supplier or limited group of suppliers for our raw materials.
Our Customer Contracts
Our OEM customers generally source business to us pursuant to written contracts, purchase orders or other firm commitments (“Commercial Arrangements”) with terms of price, quality, technology and delivery. Awarded business generally covers the supply of all or a portion of a customer’s production and service requirements for a particular product program rather than the supply of a specific quantity of products. In general, these Commercial Arrangements provide that the customer can terminate them if we do not meet specified quality, delivery and cost requirements. Although these Commercial Arrangements may be terminated at any time by our customers (but not by us), such terminations have historically been minimal and have not had a material impact on our results of operations. Because we produce products for a broad cross section of vehicle models, we are not overly reliant on any one vehicle model.
Our Commercial Arrangements with our OEM customers may provide for an annual prospective productivity cost reduction. These productivity cost reductions are generally calculated on an annual basis as a percentage of the previous year’s purchases by each customer. Historically, most of these cost reductions have been offset by internal cost reductions and through the assistance of our supply base, although no assurances can be given that we will be able to achieve such reductions in the future. The cost reduction is achieved through engineering changes, material cost reductions, logistics savings, reductions in packaging cost, labor efficiencies and other productivity actions.
Our sales and marketing efforts are designed to create customer awareness of our engineering, design and manufacturing capabilities. Our sales and marketing staff work closely with our design and engineering personnel to prepare the materials used for bidding on new business, as well as to provide a consistent interface between us and our key customers. We have sales and marketing personnel located in every major region in which we operate. From time to time, we participate in industry trade shows and advertise in industry publications.
Our principal customers for our aftermarket sales include OEM dealers and independent wholesale or retail distributors. Our sales and marketing efforts are focused on support of these two distribution chains, as well as participation in industry trade shows and direct contact with major fleets.
Competition
Within each of our principal product categories we compete with a variety of independent suppliers and with OEMs’ in-house operations, primarily on the basis of price, breadth of product offerings, product quality, technical expertise, development capability, product delivery and product service. A summary of our primary competitors is set forth below:
Seats and Seating Systems.    We believe we have a strong market position supplying Seats to the North American MD/HD Truck market. Our primary competitors in the North American commercial vehicle market include Sears Manufacturing Company, Isringhausen, Grammer AG and Seats, Inc. Our primary competitors in the European commercial vehicle market include Grammer AG and Isringhausen; and in the Asia-Pacific region include Isrihuatai and Tiancheng (in China); and Harita and Pinnacle (in India).

10

Table of Contents


Trim Systems and Components.    We believe we have a good position supplying Trim products to the North American MD/HD Truck market. We face competition from a number of different competitors with respect to each of our trim system products and components. Our primary competitors are ConMet, International Automotive Components, Superior, Blachford Ltd. and Grupo Antolin.
Cab Structures, Sleeper Boxes, Body Panels and Structural Components.    We are a supplier of cab structural components, cab structures, sleeper boxes and body panels to the North American MD/HD Truck market. Our primary competitors in this category are Magna, International Equipment Solutions (formerly Crenlo), Worthington Industries (formerly Angus Palm), McLaughlin Body Company and Defiance Metal Products.
Mirrors, Wipers and Controls.    We are a supplier of wiper systems and mirrors to the North American MD/HD Truck market. We also sell wiper systems to the construction and agriculture market in Europe. We face competition from various competitors in this category. Our principal competitors for mirrors are Hadley, Retrac, and Lang-Mekra and our principal competitors for wiper systems are Doga, Wexco, Trico and Valeo.
Electric Wire Harnesses and Panel Assemblies.    We supply a wide range of electric wire harnesses and panel assemblies used in various commercial and other vehicles. Our primary competitors for wire harnesses include large diversified suppliers such as Delphi Automotive PLC, Leoni, Nexans SA, Motherson-Sumi, St. Clair and Electrical Components International as well as many smaller companies.
Backlog
Our customers may place annual blanket purchase orders that do not obligate them to purchase any specific or minimum amount of products from us until a release is issued by the customer under the blanket purchase order. Releases are typically placed 30 to 90 days prior to required delivery and may be canceled at any time within agreed terms. We do not believe that our backlog of expected product sales covered by firm purchase orders is a meaningful indicator of future sales since orders may be rescheduled or canceled.
Employees
As of December 31, 2017, we had approximately 8,250 permanent employees, of whom approximately 14% were salaried and the remainder were hourly.  As of December 31, 2017, approximately 56% of the employees in our North American operations were unionized, with the majority of union-represented personnel based in Mexico.  On January 24, 2017, workers in our Shadyside, Ohio facility ratified a Closure Effects Agreement between Mayflower Vehicle Systems, LLC and the United Steel, Paper and Forestry, Rubber, Manufacturing and Energy, Allied Industrial and Service Workers International Union and its affiliated Local Union 9419. Production ceased in that facility in July 2017 and no hourly employees remained in the facility as of year-end.  Approximately 64% of our European, Asian and Australian operations were represented by shop steward committees.
We did not experience any material strikes, lockouts or work stoppages during 2017 and consider our relationship with our employees to be satisfactory.  On an as-needed basis during peak periods we utilize contract and temporary employees.  During periods of weak demand, we respond to reduced volumes through flexible scheduling, furloughs and/or reductions in force as necessary. 
Environmental Matters
We are subject to foreign, federal, state and local laws and regulations governing the protection of the environment and occupational health and safety, including laws regulating air emissions, wastewater discharges, and the generation, storage, handling, use and transportation of hazardous materials; the emission and discharge of hazardous materials into the soil, ground or air; and the health and safety of our colleagues. We are also required to obtain permits from governmental authorities for certain of our operations. We cannot give assurances that we are, or have been, in complete compliance with such environmental and safety laws, regulations and permits. If we violate or fail to comply with these laws, regulations or permits, we could be fined or otherwise sanctioned by regulators. In some instances, such a fine or sanction could have a material adverse effect on us. We are also subject to laws imposing liability for the cleanup of contaminated property. Under these laws, we could be held liable for costs and damages relating to contamination at our past or present facilities and at third-party sites to which we sent waste containing hazardous substances. The amount of such liability could be material.
Certain of our operations generate hazardous substances and wastes. If a release of such substances or wastes occurs at or from our properties, or at or from any offsite disposal location to which substances or wastes from our current or former operations were taken, or if contamination is discovered at any of our current or former properties, we may be held liable for the cost of cleanup and for any other response by governmental authorities or private parties, together with any associated fines, penalties or damages. In most jurisdictions, this liability would arise whether or not we had complied with environmental laws governing the handling of hazardous substances or wastes.

11

Table of Contents


Government Regulations
New emissions regulations were approved in 2016 by US regulators impacting MD/HD Truck manufacturers. The regulations require manufacturers to cut greenhouse gas emissions by 25 percent by 2027. Other countries are implementing clean air measures to reduce air pollution. For example, China's Ministry of Environment implemented new standards applicable during 2017 for Stage V vehicles, including light gasoline-powered vehicles, diesel-powered passenger vehicles and heavy diesel-powered vehicles manufactured and sold in China.
Under a California law known as Proposition 65, if the state has determined that a substance causes cancer or harms human reproduction, a warning must appear on any product sold in the state that exposes consumers to that substance. The state maintains lists of these substances and periodically adds other substances to them. Certain of our products may be subject to Proposition 65 and therefore cause us to have to provide warnings on the products in California because it does not provide for any generally applicable quantitative threshold below which the presence of a listed substance is exempt from the warning requirement. Consequently, the detection of even a trace amount of a listed substance can subject an affected product to the requirement of a warning label.
To the extent that current or future governmental regulation has a negative impact on the demand for commercial vehicles, our business, financial condition or results of operations could be adversely affected.
AVAILABLE INFORMATION
We maintain a website on the Internet at www.cvgrp.com. We make available free of charge through our website, by way of a hyperlink to a third-party Securities Exchange Commission (SEC) filing website, our Annual Reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports electronically filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act of 1934. Such information is available as soon as such reports are filed with the SEC. Additionally, our Code of Ethics may be accessed within the Investor Relations section of our website. Information found on our website is not part of this Annual Report on Form 10-K or any other report filed with the SEC.
EXECUTIVE OFFICERS OF REGISTRANT
The following table sets forth certain information with respect to our executive officers as of March 12, 2018:
Name
Age
 
Principal Position(s)
Patrick E. Miller
50
 
President, Chief Executive Officer, Director
C. Timothy Trenary
61
 
Executive Vice President and Chief Financial Officer
Greg R. Boese
61
 
Senior Vice President and Managing Director of Global Truck and Bus
Dale M. McKillop
60
 
Senior Vice President and Managing Director of Global Truck and Bus
The following biographies describe the business experience of our executive officers:
Patrick E. Miller has served as President and Chief Executive Officer and Director since November 2015. Mr. Miller, who most recently was President of the Company’s Global Truck & Bus Segment, has been with the Company since 2005. During this time, he served in the capacity of Senior Vice President & General Manager of Aftermarket; Senior Vice President of Global Purchasing; Vice President of Global Sales; Vice President & General Manager of North American Truck and Vice President & General Manager of Structures. Prior to joining the Company, Mr. Miller held engineering, sales, and operational leadership positions with Hayes Lemmerz International, Alcoa, Inc. and ArvinMeritor. He holds a Bachelor of Science in Industrial Engineering from Purdue University and a Masters of Business Administration from the Harvard University Graduate School of Business.
C. Timothy Trenary has served as Executive Vice President and Chief Financial Officer since October 2013. Mr. Trenary served as Executive Vice President and Chief Financial Officer of ProBuild Holdings LLC, a privately held North American supplier of building materials, from 2010 to 2013. Prior to that, Mr. Trenary served as Senior Vice President & Chief Financial Officer of EMCON Technologies Holdings Limited, a privately held global automotive parts supplier, from 2008 to 2010; and as Vice President and Chief Financial Officer of DURA Automotive Systems, Inc., a publicly held global automotive parts supplier, from 2007 to 2008. He holds a Bachelor of Accounting with Honors from Michigan State University and a Masters of Business Administration with Honors from the University of Detroit Mercy. Mr. Trenary is a certified public accountant with registered status in Michigan.
Greg R. Boese was promoted to Senior Vice President and  Managing Director of Global Truck and Bus in February 2016.  Mr. Boese, who most recently was Vice President of Product Line Management for Global Truck and Bus Seating, has been with the Company since 2005 when he joined the Company with the acquisition of Mayflower Vehicle Systems.  Mr. Boese started his

12

Table of Contents


tenure with Mayflower Vehicle Systems in 1995 and held positions of increasing responsibility including Vice President of Sales and Marketing.  Prior to joining Mayflower Vehicle Systems, Mr. Boese held various senior leadership positions in sales, marketing, and operational management with a division of Masco Industries. He holds a Bachelor of Science degree in Business Management from Tri State University, Angola, Indiana. 

Dale M. McKillop was promoted to Senior Vice President and Managing Director of Global Truck and Bus in February 2016.  Mr. McKillop, who most recently was Vice President and General Manager of the Company’s Global Truck & Bus Trim and Structures division, has been with the Company since 2005 when he joined the Company with the acquisition of Mayflower Vehicle Systems. Mr. McKillop has held positions of increasing responsibility with the company including Managing Director - Structures and Aftermarket, Managing Director - Structures, Director of Operations Trim and Structures, and Plant Manager.  Prior to joining Mayflower Vehicle Systems, Mr. McKillop held engineering positions with Pullman Standard from 1978 to 1982. Mr. McKillop holds a Bachelor of Science degree in Business Administration from Gardner Webb University.

Item 1A.
Risk Factors
You should carefully consider the risks described below before making an investment decision. These are not the only risks we face.
If any of these risks and uncertainties were to actually occur, our business, financial condition or results of operations could be materially and adversely affected. In such case, the trading price of our common stock could decline and you may lose all or part of your investment.
Our results of operations could be materially and adversely affected by downturns in the U.S. and global economy which are naturally accompanied by related declines in freight tonnage hauled and in infrastructure development and other construction projects.
Our results of operations are directly impacted by changes in the U.S. and global economic conditions which are accompanied by related declines in freight tonnage hauled in infrastructure development and other construction projects because, among other things:
Demand for our MD/HD truck products is generally dependent on the number of new MD/HD truck commercial vehicles manufactured in North America. Historically, the demand for MD/HD truck commercial vehicles has declined during periods of weakness in the North American economy.
Demand for our construction products is also dependent on the overall vehicle demand for new commercial vehicles in the global construction equipment market.
Demand in the medium and heavy construction vehicle market, which is the market in which our GCA products are primarily used, is typically related to the level of larger-scale infrastructure development projects.
Demand in the light construction equipment market is typically related to certain economic conditions such as the level of housing construction and other smaller-scale developments and projects.
If we experience periods of low demand for our products in the future, it could have a negative impact on our revenues, operating results and financial position.
Volatility and cyclicality in the commercial vehicle market could adversely affect us.
Our profitability depends in part on the varying conditions in the commercial vehicle market. This market is subject to considerable volatility as it moves in response to cycles in the overall business environment and is particularly sensitive to the industrial sector of the economy, which generates a significant portion of the freight tonnage hauled. Sales of commercial vehicles have historically been cyclical, with demand affected by such economic factors as industrial production, construction levels, demand for consumer durable goods, interest rates and fuel costs.
Historically, general weakness in the global economy, but especially the North American economy, and corresponding decline in the need for commercial vehicles has contributed to a downturn in commercial vehicle production. Demand for commercial vehicles depends to some extent on economic and other conditions in a given market and the introduction of new vehicles and technologies. The yearly demand for commercial vehicles may increase or decrease more than overall gross domestic product in markets we serve. Downturns historically have had a material adverse effect on our business. If unit production of commercial vehicles declines in the future it may materially and adversely affect our business and results of operations. Conversely, upswings in the global economy may result in a sharp acceleration in commercial vehicle production. A sharp acceleration in commercial vehicle production may adversely affect our ability to convert the incremental revenue into operating income efficiently.
Our operating results, revenues and expenses may fluctuate significantly from quarter-to-quarter or year-to-year, which could have an adverse effect on the market price of our common stock.

13

Table of Contents

Our operating results, revenues and expenses have in the past varied and may in the future vary significantly from quarter-to-quarter or year-to-year. These fluctuations could have an adverse effect on the market price of our common stock.
Our operating results may fluctuate as a result of these and other events and factors:

the size, timing, volume and execution of significant orders and shipments;
changes in the terms of our sales contracts;
the timing of new product announcements by us and our competitors;
changes in our pricing policies or those of our competitors;
market acceptance of new and enhanced products;
announcement of technological innovations or new products by us or our competitors;
the length of our sales cycles;
conditions in the commercial vehicle industry;
changes in our operating expenses;
personnel changes;
new business acquisitions;
uncertainty in geographic regions;
cyber-attacks;
currency and interest rate fluctuations;
uncertainty with respect to the North American Free Trade Agreement;
union actions; and
seasonal factors.
We base our operating expense budgets in large part on expected revenue trends. However, certain of our expenses are relatively fixed and as such we may be unable to adjust expenses quickly enough to offset any unexpected revenue shortfall. Accordingly, any significant change in revenue may cause significant variation in operating results in any quarter or year.
It is possible that in one or more future quarters or years, our operating results may be below the expectations of public market analysts and investors and may result in changes in analysts’ estimates. In such events, the trading price of our common stock may be adversely affected.
In the past, companies that have experienced volatility in the market price of their stock have been the subject of securities class action litigation. If we become involved in securities class action litigation in the future, it could result in substantial costs and diversion of management attention and resources, thus harming our business.
Our common stock has historically had a low trading volume and, as a result, any sale of a significant number of shares may depress the trading price of our stock; shareholders may be unable to sell their shares above the purchase price.
Our common stock is traded on the NASDAQ Global Select Market under the symbol “CVGI.” The trading volume of our common stock has historically been limited as compared to common stock of a seasoned issuer that has a large and steady volume of trading activity that will generally support continuous sales without an adverse effect on share prices. Because of the limited trading volume, holders of our securities may not be able to sell quickly any significant number of such shares, and any attempted sale of a large number of our shares may have a material adverse impact on the price of our common stock. Additionally, because of the limited number of shares being traded, the price per share is subject to volatility and may continue to be subject to rapid price swings in the future that may result in shareholders’ inability to sell their common stock at or above purchase price.
We incur restructuring and impairment charges periodically as we continue to evaluate our portfolio of assets and identify opportunities to restructure our business in an effort to optimize our cost structure.
As we continue to evaluate our manufacturing footprint to improve our cost structure and remove excess, underperforming assets, or assets that no longer fit our goals, we incur restructuring charges periodically to close facilities, such as, lease termination charges, severance charges and impairment charges of leasehold improvements and/or machinery and equipment.
Also, if we decide to close or consolidate facilities, we may face execution risks which could adversely affect our ability to serve our customers and could lead to loss of business adversely affecting our business, results of operations and financial condition.
We may be unable to successfully implement our business strategy and, as a result, our businesses and financial position and results of operations could be materially and adversely affected.

14

Table of Contents

Our ability to achieve our business and financial objectives is subject to a variety of factors, many of which are beyond our control. For example, we may not be successful in implementing our strategy if unforeseen factors emerge diminishing the expected growth in the commercial vehicle markets we supply, or we experience increased pressure on our margins. In addition, we may not succeed in integrating strategic acquisitions, and our pursuit of additional strategic acquisitions may lead to resource constraints, which could have a negative impact on our ability to meet customers’ demands, thereby adversely affecting our relationships with those customers. As a result of such business or competitive factors, we may decide to alter or discontinue aspects of our business strategy and may adopt alternative or additional strategies. Any failure to successfully implement our business strategy could materially and adversely affect our business, results of operations and growth potential.
We are subject to certain risks associated with our foreign operations.
We have operations in the United Kingdom, Czech Republic, Ukraine, Belgium, China, Australia, Mexico and India, which accounted in the aggregate for approximately 26%, 25% and 23% of our total revenues for the years ended December 31, 2017, 2016 and 2015, respectively. There are certain risks inherent in our international business activities including, but not limited to:

the difficulty of enforcing agreements and collecting receivables through certain foreign legal systems;
foreign customers, who may have longer payment cycles than customers in the U.S.;
material foreign currency exchange rate fluctuations affecting our ability to match revenue received with costs paid in the same currency;
tax rates in certain foreign countries, which may exceed those in the U.S., withholding requirements or the imposition of tariffs, exchange controls or other restrictions, including restrictions on repatriation, on foreign earnings;
intellectual property protection difficulties;
general economic and political conditions, along with major differences in business culture and practices, including the challenges of dealing with business practices that may impact the company’s compliance efforts, in countries where we operate;
exposure to local social unrest, including any resultant acts of war, terrorism or similar events;
the difficulties associated with managing a large organization spread throughout various countries; and
complications in complying with a variety of laws and regulations related to doing business with and in foreign countries, some of which may conflict with U.S. law or may be vague or difficult to comply with.

Additionally, our international business activities are also subject to risks arising from violations of U.S. laws such as the U.S. Foreign Corrupt Practices Act and similar anti-bribery laws in other jurisdictions, and various export control and trade embargo laws and regulations, including those which may require licenses or other authorizations for transactions relating to certain countries and/or with certain individuals identified by the U.S. government. If we fail to comply with applicable laws and regulations, we could suffer civil and criminal penalties that could materially and adversely affect our results of operations and financial condition.
As we continue to expand our business on a global basis, we are increasingly exposed to these risks. Our success will be dependent, in part, on our ability to anticipate and effectively manage these and other risks associated with foreign operations. These and other factors may have a material adverse effect on our international operations, business, financial condition and results of operations.
Significant changes to international trade regulations could adversely affect our results of operations.
Our business benefits from current free trade agreements and other duty preference programs, including the North American Free Trade Agreement (“NAFTA”). The Trump Administration has indicated that it may propose significant changes with respect to a variety of issues, including NAFTA, other international trade agreements, import and export regulations, and tariffs and customs duties, which have increased uncertainty regarding the future of existing international trade regulations. The imposition of tariffs on the products we manufacture and sell could have a material and adverse impact on our business, financial condition and results of operations. Additionally, if the Trump Administration or Congress takes action to withdraw from or materially modify NAFTA, our business, financial condition and results of operations could be adversely affected.
We have invested substantial resources in markets where we expect growth and we may be unable to timely alter our strategies should such expectations not be realized.
Our future growth is dependent in part on our making the right investments at the right time to support product development and manufacturing capacity in areas where we can support our customer base. We have identified the Asia-Pacific region, specifically China and India, as key markets likely to experience substantial growth in our market share, and accordingly have made and expect to continue to make substantial investments, both directly and through participation in various partnerships and joint ventures, in numerous manufacturing operations, technical centers and other infrastructure to support anticipated growth in those regions. If

15

Table of Contents

we are unable to maintain, deepen existing and develop additional customer relationships in these regions, we may not only fail to realize expected rates of return on our existing investments, but we may incur losses on such investments and be unable to timely redeploy the invested capital to take advantage of other markets, potentially resulting in lost market share to our competitors. We cannot guarantee that we will be successful in leveraging our capabilities into new markets and thus, in meeting the needs of these new customers and competing favorably in these new markets. Our results will also suffer if these regions do not grow as quickly as we anticipate.
We may be unable to complete strategic acquisitions or we may encounter unforeseen difficulties in integrating acquisitions.
We may pursue acquisition targets that will allow us to continue to expand into new geographic markets, add new customers, provide new products, manufacturing and service capabilities and increase penetration with existing customers. However, we expect to face competition for acquisition candidates, which may limit the number of our acquisition opportunities and may lead to higher acquisition prices. Moreover, acquisition of businesses may require additional debt and/or equity financing, perhaps resulting in additional leverage and/or shareholder dilution. The covenants relating to our debt instruments may further limit our ability to complete acquisitions. There can be no assurance we will find attractive acquisition candidates or successfully integrate acquired businesses into our existing business. If the expected synergies from acquisitions do not materialize or we fail to successfully integrate such new businesses into our existing businesses, our results of operations could also be materially and adversely affected.

The agreement governing our senior secured revolving credit facility and the agreement governing our senior secured term loan credit facility contain covenants that may restrict our current and future operations, particularly our ability to respond to changes in our business or to take certain actions. If we are unable to comply with these covenants, our business, results of operations and liquidity could be materially and adversely affected.

Our senior secured revolving and term loan credit facilities require us to maintain certain financial ratios and to comply with various operational and other covenants. If we do not comply with those covenants we would be precluded from borrowing under the revolving credit facility, which could have a material adverse effect on our business, financial condition and liquidity. If we are unable to borrow under our revolving credit facility, we will need to meet our capital requirements using other sources; however, alternative sources of liquidity may not be available on acceptable terms. In addition, if we fail to comply with the covenants set forth in our credit facilities the lenders thereunder could declare an event of default and cause all amounts outstanding thereunder to be due and payable immediately. We cannot assure you that our assets or cash flow would be sufficient to fully repay borrowings under our outstanding credit facilities or other debt instruments we may have in place from time to time, either upon maturity or if accelerated, upon an event of default, or that we would be able to refinance or restructure the payments on the credit facilities or such other debt instruments on acceptable terms.

In addition, the agreements governing the revolving and term loan credit facilities contain covenants that, among other things, restrict our ability to:

incur liens;
incur or assume additional debt or guarantees or issue preferred stock;
pay dividends or repurchases with respect to capital stock;
prepay, or make redemptions and repurchases of, subordinated debt;
make loans and investments;
engage in mergers, acquisitions, asset sales, sale/leaseback transactions and transactions with affiliates;
place restrictions on the ability of subsidiaries to pay dividends or make other payments to the issuer;
change the business conducted by us or our subsidiaries; and
amend the terms of subordinated debt.
Our substantial amount of indebtedness may adversely affect our cash flow and our ability to operate our business, remain in compliance with debt covenants and make payments on our indebtedness.
The aggregate amount of our outstanding indebtedness was $172.8 million as of December 31, 2017. Our indebtedness, combined with our lease and other financial obligations and contractual commitments could have other important consequences to our stockholders, including:
making it more difficult for us to satisfy our obligations with respect to our indebtedness, including the revolving credit facility and our other debt instruments, and any failure to comply with the obligations of any of our debt instruments, including financial and other restrictive covenants, could result in an event of default under the revolving credit facility and the governing documents of our debt instruments;

16

Table of Contents

the possibility that we may be unable to generate cash sufficient to pay, when due, the principal of, interest on or other amounts due in respect of our indebtedness;
making us more vulnerable to adverse changes in general economic, industry and competitive conditions;
require us to dedicate a substantial portion of our cash flow from operations to payments on our indebtedness, thereby reducing the availability of our cash flows to fund working capital, capital expenditures, acquisitions and other general corporate purposes;
limiting our flexibility in planning for, or reacting to, changes in our business and the industry in which we operate;
placing us at a competitive disadvantage compared to our competitors that have less debt; and
limiting our ability to borrow additional amounts for working capital, capital expenditures, acquisitions, debt service requirements, or execution of our business strategy or other purposes.
Any of these factors could materially and adversely affect our business, financial condition and results of operations. Our ability to make payments on our indebtedness depends on our ability to generate cash in the future. If we do not generate sufficient cash flow to meet our debt service and working capital requirements, we may need to seek additional financing or sell assets. This may make it more difficult for us to obtain financing on terms that are acceptable to us, or at all. Without any such financing, we could be forced to sell assets to make up for any shortfall in our payment obligations under unfavorable circumstances. If necessary, we may not be able to sell assets quickly enough or for sufficient amounts to enable us to meet our obligations.
Economic conditions and disruptions in the credit and financial markets could have an adverse effect on our business, financial condition and results of operations.
The financial markets experienced, in the not too distant past, a period of unprecedented turmoil, including the bankruptcy, restructuring or sale of certain financial institutions and the intervention of the U.S. federal government. Disruptions in the credit and financial markets may have a material adverse effect on our liquidity and financial condition if our ability to borrow money to finance our operations were to be impaired. A crisis in the financial markets may also have a material adverse impact on the availability and cost of credit in the future. Our ability to pay our indebtedness will depend on our future performance, which will be affected by, among other things, prevailing economic conditions. Tightening of credit in financial markets may also adversely affect the ability of our customers to obtain financing for significant truck orders and the ability of our suppliers to provide us with sufficient raw materials for our products, either of which could adversely affect our business and results of operations.
Our inability to compete effectively in the highly competitive commercial vehicle component supply industry could result in lower prices for our products, loss of market share and reduced gross margins, which could have an adverse effect on our revenues and operating results.
The commercial vehicle component supply industry is highly competitive. Some of our competitors are companies that are larger and have greater financial and other resources than we do. In some cases, we compete with divisions of our OEM customers. Our products primarily compete on the basis of price, breadth of product offerings, product quality, technical expertise and development capability, product delivery and product service. Increased competition may lead to price reductions resulting in reduced gross margins and loss of market share.
Current and future competitors may make strategic acquisitions or establish cooperative relationships among themselves or with others, foresee the course of market development more accurately than we do, develop products that are superior to our products, produce similar products at lower cost than we can, or adapt more quickly to new technologies, industry or customer requirements. By doing so, they may enhance their ability to meet the needs of our customers or potential future customers more competitively. These developments could limit our ability to obtain revenues from new customers or maintain existing revenues from our customer base. We may not be able to compete successfully against current and future competitors and our failure to do so may have a material adverse effect on our business, operating results and financial condition.
Our inability to successfully achieve operational efficiencies could result in the incurrence of additional costs and expenses that could adversely affect our reported earnings.
As part of our business strategy, we continuously seek ways to lower costs, improve manufacturing efficiencies and increase productivity in our existing operations and intend to apply this strategy to those operations acquired through acquisitions. We may be unsuccessful in achieving these objectives which could adversely affect our operating results and financial condition.
Additionally, aspects of the data upon which the company’s business strategy is based may be incomplete or unreliable, which could lead to errors in the strategy, which in turn could adversely affect the company’s performance. Also, not all business strategy can be based on data, and to the extent that it is based on assumptions and judgments that are untested, then it could be unsound and thereby lead to performance below expectations.

17

Table of Contents

We may be unable to successfully introduce new product and, as a result, our businesses and financial position and results of operations could be materially and adversely affected.
Product innovations have been and will continue to be a significant part of our business strategy. We believe it is important we continue to meet our customers’ demands for product innovation, improvement and enhancement, including the continued development of new-generation products, and design improvements and innovations that improve the quality and efficiency of our products. However, such development will require us to continue to invest in research and development and sales and marketing. We are also subject to the risks generally associated with product development, including lack of market acceptance, delays in product development and failure of products to operate properly. We may, as a result of these factors, be unable to meaningfully focus on product innovation as a strategy and may therefore be unable to meet our customers’ demands for product innovation, which could have a material adverse effect on our business, operating results and financial condition.
Our products may be rendered less attractive by changes in competitive technologies, including the introduction of autonomous vehicles.
Changes in competitive technologies, including the introduction of autonomous vehicles, may render certain of our products less attractive. Our ability to anticipate changes in technology and to successfully develop and introduce new and enhanced products on a timely basis will be a significant factor in our ability to remain competitive. There can be no assurance that we will be able to achieve the technological advances that may be necessary for us to remain competitive. We are also subject to the risks generally associated with new product introductions and applications, including lack of market acceptance, delays in product development and failure of products to operate properly, all of which could adversely affect our business, results of operations and growth potential.
Our customer base is concentrated and the loss of business from a major customer or the discontinuation of particular commercial vehicle platforms could reduce our revenues.
Sales to A.B. Volvo, Daimler Truck and PACCAR accounted for approximately 17%, 16% and 10%, respectively, of our revenue in 2017, and our ten largest customers accounted for approximately 75% of our revenue in 2017. Even though we may be selected as the supplier of a product by an OEM for a particular vehicle, our OEM customers issue blanket purchase orders, which generally provide for the supply of that customer’s annual requirements for that vehicle, rather than for a specific number of our products. If the OEM’s requirements are less than estimated, the number of products we sell to that OEM will be accordingly reduced. In addition, the OEM may terminate its purchase orders with us at any time. The loss of any of our largest customers or the loss of significant business from any of these customers could have a material adverse effect on our business, financial condition and results of operations.
Our profitability could be adversely affected if the actual production volumes for our customers’ vehicles are significantly lower than expected.
We incur costs and make capital expenditures based in part upon estimates of production volumes for our customers’ vehicles. While we attempt to establish a price for our components and systems that will compensate for variances in production volumes, if the actual production of these vehicles is significantly less than anticipated, our gross margin on these products would be adversely affected. We enter into agreements with our customers at the beginning of a given platform’s life to supply products for that platform. Once we enter into such agreements, fulfillment of the supply requirements is our obligation for the entire production life of the platform, with terms generally ranging from five to seven years, and we have somewhat limited provisions to terminate such contracts. We may become committed to supply products to our customers at selling prices that are not sufficient to cover the direct cost to produce such products. We cannot predict our customers’ demands for our products. If customers representing a significant amount of our revenues were to purchase materially lower volumes than expected, or if we are unable to keep our commitment under the agreements, it would have a material adverse effect on our business, financial condition and results of operations.
Our major OEM customers may exert significant influence over us.
The commercial vehicle component supply industry has traditionally been highly fragmented and serves a limited number of large OEMs. As a result, OEMs have historically had a significant amount of leverage over their outside suppliers. Generally, our contracts with major OEM customers provide for an annual productivity cost reduction. Historically, we have been able to generally mitigate these customer-imposed cost reduction requirements through product design changes, increased productivity and similar programs with our suppliers. However, if we are unable to generate sufficient production cost savings in the future to offset these cost reductions, our gross margin and profitability would be adversely affected. Additionally, we generally do not have clauses in our customer agreements that guarantee that we will recoup the design and development costs that we incurred to develop a product.

18

Table of Contents

In other cases, we share the design costs with the customer and thereby have some risk that not all the costs will be covered if the project does not go forward or if it is not as profitable as expected.
In addition, changes in OEMs’ purchasing policies or payment practices could have an adverse effect on our business. Furthermore, due to the cost focus of our major customers, we have been, and expect to continue to be, requested to reduce prices as part of our initial business quotations and over the life of vehicle platforms we have been awarded. We cannot be certain that we will be able to generate cost savings and operational improvements in the future that are sufficient to offset price reductions requested by existing customers and necessary to win additional business.
Demand for our products could also be materially reduced if our customers vertically integrate their operations in a significant manner, which would have a material and adverse impact on our business and results of operations.
If we are unable to obtain raw materials at reasonable prices, it could adversely impact our results of operations and financial condition.
Numerous raw materials are used in the manufacture of our products. Steel, aluminum, petroleum-based products, copper, resin, foam, fabrics, wire and wire components account for the most significant portion of our raw material costs. Although we currently maintain alternative sources for most raw materials, our business is subject to the risk of price increases and periodic delays in delivery. We may be assessed surcharges on certain purchases of steel, copper and other raw materials. If we are unable to purchase certain raw materials required for our operations for a significant period of time, our operations would be disrupted, and our results of operations would be adversely affected. In addition, if we are unable to pass on the increased costs of raw materials to our customers, this could adversely affect our results of operations and financial condition. Furthermore, in the past, we have experienced significant increases and fluctuations in raw materials pricing; and future changes in the prices of raw materials or utilities could have a material adverse impact on us without proportionate recovery from our customers.
We could experience disruption in our supply or delivery chain, which could cause one or more of our customers to halt or delay production.
We, as with other component manufactures in the commercial vehicle industry, sometimes ship products to the customers throughout the world so they are delivered on a “just-in-time” basis in order to maintain low inventory levels. Our suppliers (external suppliers as well as our own production sites) also sometimes use a similar method. This just-in-time method makes the logistics supply chain in our industry very complex and very vulnerable to disruptions.
The potential loss of one of our suppliers or our own production sites could be caused by a myriad of potential problems, such as closures of one of our own or one of our suppliers’ plants or critical manufacturing lines due to strikes, mechanical breakdowns, electrical outages, fires, explosions, political upheaval, as well as logistical complications due to weather, volcanic eruptions, earthquakes, flooding or other natural disasters, mechanical failures, delayed customs processing and more. Additionally, as we expand in growth markets, the risk for such disruptions is heightened. The lack of even a small single subcomponent necessary to manufacture one of our products, for whatever reason, could force us to cease production, possibly for a prolonged period. Similarly, a potential quality issue could force us to halt deliveries while we validate the products. Even where products are ready to be shipped or have been shipped, delays may arise before they reach our customer. Our customers may halt or delay their production for the same reason if one of their other suppliers fails to deliver necessary components. This may cause our customers to suspend their orders or instruct us to suspend delivery of our products, which may adversely affect our financial performance.
When we cease timely deliveries, we have to absorb our own costs for identifying and solving the root cause problem as well as expeditiously producing replacement components or products. Generally, we must also carry the costs associated with “catching up,” such as overtime and premium freight.
Additionally, if we are the cause for a customer being forced to halt production the customer may seek to recoup all of its losses and expenses from us. These losses and expenses could be very significant and may include consequential losses such as lost profits. Thus, any supply-chain disruption, however small, could potentially cause the complete shutdown of an assembly line of one of our customers, and any such shutdown could expose us to material claims of compensation. Where a customer halts production because of another supplier failing to deliver on time, we may not be fully compensated, if at all, and therefore our business and financial results could be materially and adversely affected.
Security breaches and other disruptions could compromise our information systems and expose us to liability, which could cause our business and reputation to suffer.

In the ordinary course of our business, we collect and store sensitive data, including intellectual property, financial information, our proprietary business information and that of our customers, suppliers and business partners, and personally identifiable information of our customers and employees, in our data centers and on our networks. The secure processing, maintenance and

19

Table of Contents

transmission of this information is critical to our operations and business strategy. Despite our security measures, our information technology and infrastructure may be vulnerable to attacks by hackers or breached due to employee error, malfunction, malfeasance or other disruptions. Like most companies, our systems are under attack on a routine basis.  At times there are breaches of our security measures.  Breaches can and have, at times, compromised our networks and the associated applications and information residing on them.   Any such access, disclosure or other loss of information could result in legal claims or proceedings, liability under laws that protect the privacy of personal information, regulatory penalties, disrupt our operations and the services we provide to customers, damage our reputation, and cause a loss of confidence in our products and services, which could adversely affect our business and our results of operations.
Equipment failures, delays in deliveries or catastrophic loss at any of our facilities could lead to production or service curtailments or shutdowns.
We manufacture or assemble our products at facilities in North America, Europe, Asia and Australia. An interruption in production or service capabilities at any of these facilities as a result of equipment failure or other reasons could result in our inability to produce our products. In the event of a stoppage in production at any of our facilities, even if only temporary, or if we experience delays as a result of events that are beyond our control, delivery times to our customers could be severely affected. Any significant delay in deliveries to our customers could lead to increased returns or cancellations. Our facilities are also subject to the risk of catastrophic loss due to unanticipated events such as fires, explosions, violent weather conditions or acts of God. We may also experience plant shutdowns or periods of reduced production as a result of equipment failure, delays in deliveries or catastrophic loss, which could have a material adverse effect on our business, results of operations and financial condition.
Volatility in the commercial vehicle market could result from manmade and natural disasters and other global business disruptions.
Natural disasters and other global business disruptions may disrupt the commercial vehicle supply chain and materially and adversely affect global production levels in our industry. The impact from disasters resulting in wide-spread destruction may not be immediately apparent. It is particularly difficult to assess the impact of catastrophic losses on our suppliers and end customers, who themselves may not fully understand the impact of such events on their businesses. Accordingly, there is no assurance our results of operations will not be materially affected as a result of the impact of future disasters.
If we are unable to recruit or retain senior management and other skilled personnel, our business, operating results and financial condition could be materially and adversely affected.
Our operations depend to a large extent on the efforts of our senior management team as well as our ability to attract, train, integrate and retain highly skilled personnel. We seek to develop and retain an effective management team through the proper positioning of existing key employees and the addition of new management personnel where necessary. Retaining personnel with the right skills at competitive wages can be difficult in certain markets in which we are doing business, particularly those locations that are seeing much inbound investment and have highly mobile workforces. Additionally, attracting sufficiently well-educated and talented management, especially middle-management employees, in certain markets can be challenging.
We may not be able to retain our current senior management and other skilled personnel or attain similarly skilled personnel in the future. If we lose senior management or the services of our skilled workforce, or if we are unable to attract, train, integrate and retain the highly skilled personnel we need, our business, operating results and financial condition could be materially and adversely affected.
We may be adversely impacted by labor strikes, work stoppages and other matters.
As of December 31, 2017, approximately 56% of the employees in our North American operations were unionized, with the majority of union-represented personnel based in Mexico. We have experienced limited unionization efforts at certain of our other North American facilities from time to time. In addition, approximately 64% of our employees of our European, Asian and Australian operations were represented by a shop steward committee, which may limit our flexibility in our relationship with these employees. We may encounter future unionization efforts or other types of conflicts with labor unions or our employees.
Many of our OEM customers and their suppliers also have unionized work forces. Work stoppages or slow-downs experienced by OEMs or their other suppliers could result in slow-downs or closures of assembly plants where our products are included in assembled commercial vehicles. In the event that one or more of our customers or their suppliers experience a material work stoppage, such work stoppage could have a material adverse effect on our business.
Provisions in our charter documents and Delaware law could discourage potential acquisition proposals, could delay, deter or prevent a change in control and could limit the price certain investors might be willing to pay for our stock.

20

Table of Contents

Certain provisions of our certificate of incorporation and by-laws may inhibit changes in control of our company not approved by our board of directors. These provisions include:
a prohibition on stockholder action through written consents;
a requirement that special meetings of stockholders be called only by the board of directors;
advance notice requirements for stockholder proposals and director nominations;
limitations on the ability of stockholders to amend, alter or repeal the by-laws; and
the authority of the board of directors to issue, without stockholder approval, preferred stock and common stock with such terms as the board of directors may determine.
We are also afforded the protections of Section 203 of the Delaware General Corporation Law, which would prevent us from engaging in a business combination with a person who becomes a 15% or greater stockholder for a period of three years from the date such person acquired such status unless certain board or stockholder approvals were obtained. These provisions could limit the price that certain investors might be willing to pay in the future for shares of our common stock.
Our earnings may be adversely affected by changes to the carrying values of our tangible and intangible assets as a result of recording any impairment charges deemed necessary.
We are required to perform impairment tests whenever events and circumstances indicate the carrying value of certain assets may not be recoverable. Significant or unanticipated changes in circumstances, such as the general economic environment, changes or downturns in our industry as a whole, termination of any of our customer contracts, restructuring efforts and general workforce reductions, may result in a charge for impairment that can materially and adversely affect our reported net income and our stockholders’ equity.
We have taken, are taking, and may take future restructuring actions to realign and resize our production capacity and cost structure to meet current and projected operational and market requirements. Charges related to these actions or any further restructuring actions may have a material adverse effect on our results of operations and financial condition. There can be no assurance that any current or future restructuring will be completed as planned or achieve the desired results. The failure to complete restructuring as planned could materially and adversely affect our results of operations.
We have established and may establish in the future valuation allowances on deferred tax assets. These changes may have a material adverse effect on our results of operations and financial position.
Additionally, from time to time in the past, we have recorded asset impairment losses relating to specific plants and operations. Generally, we record asset impairment losses when we determine that our estimates of the future undiscounted cash flows from an operation will not be sufficient to recover the carrying value of that facility’s building, fixed assets and production tooling. For goodwill, we perform a qualitative assessment of whether it is more likely than not that the reporting unit’s fair value is less than its carrying amount. If the fair value of the reporting unit is less than its carrying amount, we compare its implied fair value of goodwill to its carrying amount. If the carrying amount of goodwill exceeds its implied fair value, the reporting unit would recognize an impairment loss for that excess amount. There can be no assurance that we will not incur such charges in the future as changes in economic or operating conditions impacting the estimates and assumptions could result in additional impairment. Any future impairments may materially and adversely affect our results of operations.
Tax legislation initiatives or challenges to our tax positions could adversely affect our results of operations and financial condition.
We are a multinational corporation with operations in the United States and international jurisdictions. As such, we are subject to the tax laws and regulations of the U.S. federal, state and local governments and various international jurisdictions. From time to time, various legislative initiatives may be proposed that could adversely affect our tax positions. There can be no assurance that our effective tax rate or tax payments will not be adversely affected by these initiatives. In addition, U.S. federal, state and local, as well as international, tax laws and regulations are extremely complex and subject to varying interpretations. There can be no assurance that our tax position will not be challenged by relevant tax authorities or that we would be successful in any such challenge.

On December 22, 2017, the U.S. Tax Cuts and Jobs Act of 2017 ("U.S. Tax Reform") was signed into law. The U.S. Tax Reform significantly changes how the U.S. taxes corporations. The U.S. Tax Reform requires complex computations to be performed that were not previously required in U.S. tax law, judgments to be made in interpretation of the provisions of the U.S. Tax Reform and significant estimates in calculations. The Internal Revenue Service and other regulatory bodies could interpret or issue guidance on how provisions of the U.S. Tax Reform will be applied or otherwise administered that is different from our interpretation. As we complete our analysis of the U.S. Tax Reform, collect and prepare necessary data, and interpret any additional guidance, we

21

Table of Contents

may make adjustments to provisional amounts we have recorded that may materially impact our Consolidated Statement of Operations in the period in which the adjustments are made.
The geographic profile of our taxable income could adversely impact our tax provision and therefore our results of operations.
Our future tax provision could be adversely affected by the geographic profile of our taxable income and by changes in the valuation of our deferred tax assets and liabilities. Our results could be materially impacted by significant changes in our effective tax rate. Additionally, any changes to manufacturing activities could result in significant changes to our effective tax rate related to products manufactured either in the United States or in international jurisdictions. If the United States or another international jurisdiction implements a tax change related to products manufactured in a particular jurisdiction where we do business, our results could be materially and adversely affected.
Exposure to currency exchange rate fluctuations on cross border transactions and translation of local currency results into United States dollars could materially impact our results of operations.
Cross border transactions, both with external parties and intercompany relationships, result in increased exposure to foreign currency fluctuations. The strengthening or weakening of the United States dollar may result in favorable or unfavorable foreign currency translation effects in as much as the results of our foreign locations are translated into United States dollars. This could materially impact our results of operations.
Litigation against us could be costly and time consuming to defend, as a result, our businesses and financial position could be materially and adversely affected.
We are regularly subject to legal proceedings and claims that arise in the ordinary course of business, such as workers’ compensation claims, Occupational Safety and Health Administration investigations, employment disputes, unfair labor practice charges, examination by the Internal Revenue Service, customer and supplier disputes, contractual disputes, intellectual property disputes, environmental claims and product liability claims arising out of the conduct of our business. Litigation may result in substantial costs and may divert management’s attention and resources from the operation of our business, which could have a material adverse effect on our business, results of operations or financial condition.
We have only limited protection for our proprietary rights in our intellectual property, which makes it difficult to prevent third parties from infringing upon our rights.
Our success depends to a certain degree on our ability to protect our intellectual property and to operate without infringing on the proprietary rights of third parties. While we have been issued patents and have registered trademarks with respect to many of our products, our competitors could independently develop similar or superior products or technologies, duplicate our designs, trademarks, processes or other intellectual property or design around any processes or designs on which we have or may obtain patents or trademark protection. In addition, it is possible third parties may have or acquire licenses for other technology or designs that we may use or desire to use, requiring us to acquire licenses to, or to contest the validity of, such patents or trademarks of third parties. Such licenses may not be made available to us on acceptable terms, if at all, or we may not prevail in contesting the validity of third party rights.
In addition to patent and trademark protection, we also protect trade secrets, “know-how” and other confidential information against unauthorized use or disclosure by persons who have access to them, such as our employees and others, through contractual arrangements. These arrangements may not provide meaningful protection for our trade secrets, know-how or other confidential information in the event of any unauthorized use, misappropriation or disclosure. If we are unable to maintain the proprietary nature of our technologies, trade secrets, know-how, or other confidential information, our revenues could be materially and adversely affected.
As we diversify and globalize our geographic footprint, we may encounter laws and practices in emerging markets that are not as stringent or enforceable as those present in developed markets, and thus incur a higher risk of intellectual property infringement, which could materially and adversely affect our results of operations.
We may be subject to product liability claims, recalls or warranty claims, which could be expensive, damage our reputation and result in a diversion of management resources.
As a supplier of products and systems to commercial and construction vehicle OEMs and markets, we face an inherent business risk of exposure to product liability claims in the event that our products, or the equipment into which our products are incorporated, malfunction and result in personal injury or death. Product liability claims could result in significant losses as a result of expenses incurred in defending claims or the award of damages.

22

Table of Contents

In addition, we may be required to participate in recalls involving systems or components sold by us if any prove to be defective, or we may voluntarily initiate a recall or make payments related to such claims as a result of various industry or business practices or the need to maintain good customer relationships. Such a recall would result in a diversion of management resources. While we maintain product liability insurance generally with a self-insured retention amount, we cannot assure you that it will be sufficient to cover all product liability claims, that such claims will not exceed our insurance coverage limits or that such insurance will continue to be available on commercially reasonable terms, if at all. Any product liability claim brought against us could have a material adverse effect on our results of operations.
We warrant the workmanship and materials of many of our products under limited warranties and have entered into warranty agreements with certain OEMs that warranty certain of our products in the hands of these OEMs’ customers, in some cases for as long as seven years. From time to time, we receive product warranty claims from our customers, pursuant to which we may be required to bear costs of repair or replacement of certain of our products. Accordingly, we are subject to risk of warranty claims in the event that our products do not conform to our customers’ specifications or, in some cases in the event that our products do not conform to their customers’ expectations. It is possible for warranty claims to result in costly product recalls, significant repair costs and damage to our reputation, all of which would materially and adversely affect our results of operations.
Our products may be susceptible to claims by third parties that our products infringe upon their proprietary rights.
As the number of products in our target markets increases and the functionality of these products further overlaps, we may become increasingly subject to claims by a third party that our technology infringes such party’s proprietary rights. Regardless of their merit, any such claims could be time consuming and expensive to defend, may divert management’s attention and resources, could cause product shipment delays and could require us to enter into costly royalty or licensing agreements. If successful, a claim of infringement against us and our inability to license the infringed or similar technology and/or product could have a material adverse effect on our business, operating results and financial condition.
Our businesses are subject to statutory environmental and safety regulations in multiple jurisdictions, and the impact of any changes in regulation and/or the violation of any applicable laws and regulations by our businesses could result in a material adverse effect on our financial condition and results of operations.
We are subject to foreign, federal, state, and local laws and regulations governing the protection of the environment and occupational health and safety, including laws regulating air emissions, wastewater discharges, generation, storage, handling, use and transportation of hazardous materials; the emission and discharge of hazardous materials into the soil, ground or air; and the health and safety of our colleagues. We are also required to obtain permits from governmental authorities for certain of our operations. We cannot assure you that we are, or have been, in complete compliance with such environmental and safety laws, and regulations. Certain of our operations generate hazardous substances and wastes. If a release of such substances or wastes occurs at or from our properties, or at or from any offsite disposal location to which substances or wastes from our current or former operations were taken, or if contamination is discovered at any of our current or former properties, we may be held liable for the costs of cleanup and for any other response by governmental authorities or private parties, together with any associated fines, penalties or damages. In most jurisdictions, this liability would arise whether or not we had complied with environmental laws governing the handling of hazardous substances or wastes.
Several of our facilities are either certified as, or are in the process of being certified as ISO 9001, 14000, 14001 or TS16949 (the international environmental management standard) compliant or are developing similar environmental management systems. We have made, and will continue to make, capital expenditures to implement such environmental programs and comply with environmental requirements.
The environmental laws to which we are subject have become more stringent over time, and we could incur material costs or expenses in the future to comply with environmental laws. If we violate or fail to comply with these laws and regulations or do not have the requisite permits, we could be fined or otherwise sanctioned by regulators. In some instances, such a fine or sanction could have a material adverse effect on our financial condition and results of operations.
We may be adversely affected by the impact of government regulations on our OEM customers.
Although the products we manufacture and supply to commercial vehicle OEMs are not subject to significant government regulation, our business is indirectly impacted by the extensive governmental regulation applicable to commercial vehicle OEMs. These regulations primarily relate to emissions and noise standards imposed by the EPA, state regulatory agencies in North America, such as CARB, and other regulatory agencies around the world. Commercial vehicle OEMs are also subject to the National Traffic and Motor Vehicle Safety Act and Federal Motor Vehicle Safety Standards promulgated by NHTSA in the U.S. Changes in emission standards and other proposed governmental regulations could impact the demand for commercial vehicles and, as a result, indirectly impact our operations. For example, new emission standards for truck engines used in Class 5 to 8 trucks imposed by the EPA and CARB became effective in 2010. In 2011, the EPA and NHTSA adopted a program to reduce greenhouse gas emissions and improve

23

Table of Contents

the fuel efficiency of medium-and heavy-duty vehicles. These standards are anticipated to phase in with increasing stringency in each model year from 2014 to 2018. To the extent that current or future governmental regulation has a negative impact on the demand for commercial vehicles, our business, financial condition or results of operations could be adversely affected.
Item 1B.
Unresolved Staff Comments
None.

24

Table of Contents

Item 2.
Properties
Our corporate office is located in New Albany, Ohio. Several of our facilities are located near our OEM customers to reduce distribution costs, reduce risk of interruptions in our delivery schedule, further improve customer service and provide our customers with reliable delivery of products and services. The following table provides selected information regarding our principal facilities as of December 31, 2017:
Location
 
Primary Product/Function
 
Ownership Interest
Piedmont, Alabama
 
Aftermarket Distribution
 
Owned
Douglas, Arizona
 
Warehouse
 
Leased
Dalton, Georgia
 
Trim & Warehouse
 
Leased
Monona, Iowa
 
Wire Harness
 
Owned
Michigan City, Indiana
 
Wipers, Switches
 
Leased
Kings Mountain, North Carolina
 
Cab, Sleeper Box
 
Owned
Concord, North Carolina
 
Injection Molding
 
Leased
Chillicothe, Ohio
 
Interior Trim, Mirrors & Warehouse
 
Owned / Leased
New Albany, Ohio
 
Corporate Headquarters / R&D
 
Leased
Vonore, Tennessee
 
Seats, Flooring & Warehouse
 
Owned / Leased
Dublin, Virginia
 
Interior Trim & Warehouse
 
Owned / Leased
Agua Prieta, Mexico
  
Wire Harness
 
Leased
Esqueda, Mexico
 
Wire Harness
 
Leased
Saltillo, Mexico
 
Interior Trim & Seats
 
Leased
Northampton, United Kingdom
 
Seats
 
Leased
Brisbane, Australia
 
Seats
 
Leased
Sydney, Australia
 
Seats
 
Leased
Mackay, Australia
 
Distribution
 
Leased
Melbourne, Australia
 
Distribution
 
Leased
Perth, Australia
 
Distribution
 
Leased
Jiading, China
 
Seats and Wire Harness / R&D
 
Leased
Brandys nad Orlici, Czech Republic
 
Seats
 
Owned
Liberec, Czech Republic
 
Wire Harness
 
Leased
Baska (State of Gujarat) India
 
Seats
 
Leased
Pune (State of Maharashtra), India
 
Seats / R&D
 
Leased
Dharwad (State of Karnataka), India
 
Seats
 
Leased
L’viv, Ukraine
 
Wire Harness
 
Leased
We also have leased sales and service offices located in the Belgium, Australia, and Czech Republic and a sales office branch in Sweden. Our owned domestic facilities are subject to liens securing our obligations under our revolving credit facility and senior secured term loan credit facility as described in Note 6 of the "Notes to Consolidated Financial Statements".
Utilization of our facilities varies with North American, European, Asian and Australian commercial vehicle production and general economic conditions in such regions. All locations are principally used for manufacturing, assembly, distribution or warehousing, except for our New Albany, Ohio facility, which is an administrative office.
Item 3.
Legal Proceedings
We are subject to various legal proceedings and claims arising in the ordinary course of business, including, but not limited to, workers’ compensation claims, OSHA investigations, employment disputes, unfair labor practice charges, customer and supplier disputes, service provider disputes, product liability claims, intellectual property disputes, environmental claims arising out of the conduct of our businesses, and examinations by the Internal Revenue Service (“IRS”). We are not involved in any litigation at this time in which we expect that an unfavorable outcome of the proceedings will have a material adverse effect on our financial position, results of operations or cash flows.



25

Table of Contents

Item 4.
Mine Safety Disclosures
Not applicable.

26

Table of Contents


PART II
Item 5.
Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
Our common stock is traded on the NASDAQ Global Select Market under the symbol “CVGI.” The following table sets forth the high and low sale prices for our common stock, for the periods indicated, as regularly reported by the NASDAQ Global Select Market:
 
High
 
Low
Year Ended December 31, 2017:
 
 
 
Fourth Quarter
$
11.85

 
$
7.20

Third Quarter
$
9.17

 
$
5.55

Second Quarter
$
9.62

 
$
6.52

First Quarter
$
6.87

 
$
5.15

Year Ended December 31, 2016:
 
 
 
Fourth Quarter
$
6.00

 
$
4.36

Third Quarter
$
5.88

 
$
3.82

Second Quarter
$
5.56

 
$
2.14

First Quarter
$
3.33

 
$
2.02

As of March 12, 2018, there were 164 holders of record of our outstanding common stock.
We have not declared or paid any dividends to the holders of our common stock in the past and do not anticipate paying dividends in the foreseeable future. Any future payment of dividends is within the discretion of the Board of Directors and will depend upon, among other factors, the capital requirements, operating results and financial condition of CVG. In addition, our ability to pay cash dividends is limited under the terms of the Third Amended and Restated Loan and Security Agreement and the Term Loan and Security Agreement, as described in more detail under “Management’s Discussion and Analysis - Liquidity and Capital Resources - Debt and Credit Facilities.”
The following graph compares the cumulative five-year total return to holders of Commercial Vehicle Group, Inc.’s common stock to the cumulative total returns of the NASDAQ Composite Index and a Peer Group that includes a legacy group through October 31, 2016 and the new group from November 1, 2016 onward. The legacy group is Altra Industrial Motion Corp, Core Molding Technologies, L.B. Foster Company, Fuel Systems Solutions Inc., Modine Manufacturing, Meritor Inc. EnPro Industries, Stoneridge Inc., Titan International and Wabco Holdings. The new peer group is L.B. Foster Company, Modine Manufacturing, EnPro Industries, Stoneridge Inc., LCI Industries, Shiloh Industries Inc., Standard Motor Products Inc., ASTEC Industries Inc., Gentherm Inc., Dorman Products Inc., Freightcar America Inc., Federal Signal Corp., Spartan Motors Inc., Supreme Industries, American Railcar Industries Inc. and Columbus McKinnon Corp. The graph assumes that the value of the investment in the Company’s common stock in the peer group and the index (including reinvestment of dividends) was $100 on December 31, 2012 and tracks it through December 31, 2017.

27

Table of Contents

cvgi-123120_chartx22841.jpg
 
12/31/12
12/31/13
12/31/14
12/31/15
12/31/16
12/31/17
Commercial Vehicle Group, Inc.
100.00

88.55

81.12

33.62

67.23

130.43

NASDAQ Composite
100.00

140.17

160.95

172.39

187.85

243.70

Legacy Peer Group
100.00

139.63

148.56

119.34

146.94

207.14

New Peer Group
100.00

155.17

160.60

150.15

202.66

225.11

The information in the graph and table above is not “solicitation material,” is not deemed “filed” with the Securities and Exchange Commission and is not to be incorporated by reference in any of our filings under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended, whether made before or after the date of this annual report, except to the extent that we specifically incorporate such information by reference.
We did not repurchase any of our common stock on the open market as part of a stock repurchase program during 2017. Our employees surrendered 161,382 shares of our common stock in 2017 to satisfy tax withholding obligations on the vesting of restricted stock awards issued under our Fourth Amended and Restated Equity Incentive Plan and the 2014 Equity Incentive Plan. The following table sets forth information in connection with purchases made by, or on behalf of, us or any affiliated purchaser, of shares of our common stock during the quarterly period ended December 31, 2017:
 
(a) Total
Number of
Shares (or Units)
Purchased
 
(b) Average
Price Paid
per Share
(or Unit)
 
(c) Total
Number of
Shares (or
Units)
Purchased as
Part of
Publicly
Announced
Plans or
Programs
 
(d) Maximum
Number (or
Approximate
Dollar Value) of
Shares (or Units)
that May Yet Be
Purchased Under
the Plans or
Programs
October 1, 2017 through December 31, 2017
161,382

 
$
8.43

 

 


Unregistered Sales of Equity Securities
We did not sell any equity securities during 2017 that were not registered under the Securities Act of 1933, as amended.

28

Table of Contents

Item 6.
Selected Financial Data
The following table sets forth selected consolidated financial data regarding our business and certain industry information and should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and our consolidated financial statements and notes thereto included elsewhere in this Annual Report on Form 10-K.
Material Events Affecting Financial Statement Comparability
There are no material events affecting financial statement comparability of our consolidated financial statements contained in Item 8 of our Annual Report on Form 10-K for the year ended December 31, 2017.
The table below sets forth certain operating revenues for the periods indicated (in thousands, except per share data):
 
Years Ended December 31,
 
2017
 
2016
 
2015
 
2014
 
2013
Statements of Operations Data:
 
 
 
 
 
 
 
 
 
Revenues
$
755,231

 
$
662,112

 
$
825,341

 
$
839,743

 
$
747,718

Cost of revenues
662,666

 
574,882

 
714,519

 
732,055

 
667,989

Gross profit
92,565

 
87,230

 
110,822

 
107,688

 
79,729

Selling, general and administrative expenses
59,800

 
60,542

 
71,469

 
72,480

 
71,711

Amortization expense
1,320

 
1,305

 
1,327

 
1,515

 
1,580

Operating income
31,445

 
25,383

 
38,026

 
33,693

 
6,438

Other (income) expense
(1,349
)
 
(769
)
 
(152
)
 
215

 
139

Interest expense
19,149

 
19,318

 
21,359

 
20,716

 
21,087

Income (loss) before provision (benefit) for income taxes
13,645

 
6,834

 
16,819

 
12,762

 
(14,788
)
Provision (benefit) for income taxes
15,350

 
49

 
9,758

 
5,131

 
(2,337
)
Net (loss) income
(1,705
)
 
6,785

 
7,061

 
7,631

 
(12,451
)
Less: Non-controlling interest in subsidiary’s income (loss)

 

 
1

 
1

 
(6
)
Net (loss) income attributable to CVG stockholders
$
(1,705
)
 
$
6,785

 
$
7,060

 
$
7,630

 
$
(12,445
)
(Loss) income per share attributable to common stockholders:
 
 
 
 
 
 
 
 
 
Basic
$
(0.06
)
 
$
0.23

 
$
0.24

 
$
0.26

 
$
(0.44
)
Diluted
$
(0.06
)
 
$
0.23

 
$
0.24

 
$
0.26

 
$
(0.44
)
Weighted average common shares outstanding:
 
 
 
 
 
 
 
 
 
Basic
29,942

 
29,530

 
29,209

 
28,926

 
28,584

Diluted
29,942

 
29,878

 
29,399

 
29,117

 
28,584


29

Table of Contents

 
Years Ended December 31,
 
2017
 
2016
 
2015
 
2014
 
2013
Balance Sheet Data (at end of each period):
 
 
 
 
 
 
 
 
 
Working capital (current assets less current liabilities)
$
150,903

 
$
202,693

 
$
193,424

 
$
192,618

 
$
176,979

Total assets
384,388

 
428,765

 
436,679

 
442,927

 
432,441

Total liabilities, excluding debt
142,697

 
127,921

 
133,112

 
133,177

 
122,500

Total debt, net of prepaid debt financing costs and discount
166,949

 
233,154

 
235,000

 
250,000

 
250,000

Total CVG stockholders’ equity
74,742

 
67,690

 
65,930

 
58,801

 
59,945

Total non-controlling interest

 

 

 
35

 
33

Total stockholders’ equity
74,742

 
67,690

 
65,930

 
58,836

 
59,978

Other Data:
 
 
 
 
 
 
 
 
 
Net cash provided by (used in):
 
 
 
 
 
 
 
 
 
Operating activities
$
2,257

 
$
49,365

 
$
55,299

 
$
9,519

 
$
19,154

Investing activities
(10,776
)
 
(8,903
)
 
(14,506
)
 
(12,289
)
 
(12,949
)
Financing activities
(72,848
)
 
(714
)
 
(16,008
)
 
514

 
(937
)
Depreciation and amortization
15,344

 
16,451

 
17,710

 
18,247

 
20,583

Capital expenditures
13,567

 
11,917

 
15,590

 
14,568

 
13,666

North American Class 8 Production (units) 1
256,000

 
228,000

 
323,000

 
297,000

 
246,000

North America Class 5-7 Production (units) 1
249,000

 
233,000

 
237,000

 
226,000

 
201,000

(1) 
Source: ACT (February 2018).

30

Table of Contents

Item 7.
Management’s Discussion and Analysis of Financial Condition and Results of Operations
You should read the following discussion and analysis in conjunction with the information set forth under “Item 6 - Selected Financial Data” and our consolidated financial statements and the notes thereto included in Item 8 in this Annual Report on Form 10-K. The statements in this discussion regarding industry outlook, our expectations regarding our future performance, liquidity and capital resources and other non-historical statements in this discussion are forward-looking statements. See “Forward-Looking Information” on page ii of this Annual Report on Form 10-K. These forward-looking statements are subject to numerous risks and uncertainties, including, but not limited to, the risks and uncertainties described under “Item 1A - Risk Factors.” Our actual results may differ materially from those contained in or implied by any forward-looking statements.

31

Table of Contents

Company Overview
Commercial Vehicle Group, Inc. (and its subsidiaries) is a leading supplier of a full range of cab related products and systems for the global commercial vehicle market, including the MD/HD Truck market, the medium- and heavy-construction vehicle market, and the military, bus, agriculture, specialty transportation, mining, industrial equipment and off-road recreational markets.
We have manufacturing operations in the United States, Mexico, United Kingdom, Czech Republic, Ukraine, China, India and Australia. Our products are primarily sold in North America, Europe, and the Asia-Pacific region.
Our products include Seats; Trim; cab structures, sleeper boxes, body panels and structural components; mirrors, wipers and controls; and electric wire harness and panel assemblies designed for applications in commercial and other vehicles.
We are differentiated from automotive industry suppliers by our ability to manufacture low volume, customized products on a sequenced basis to meet the requirements of our customers. We believe our products are used by a majority of the North American MD/HD Truck and certain leading global construction and agriculture OEMs, which we believe creates an opportunity to cross-sell our products.
Business Overview
For the year ended December 31, 2017, approximately 42% of our revenue was generated from sales to North American MD/HD Truck OEMs. Our remaining revenue was primarily derived from sales to OEMs in the global construction equipment market, aftermarket, OE service organizations, military market and other specialty markets.
Demand for our products is driven to a significant degree by preferences of the end-user of the vehicle, particularly with respect to heavy-duty trucks. Unlike the automotive industry, heavy-duty truck OEMs generally afford the end-user the ability to specify many of the component parts that will be used to manufacture the vehicle, including a wide variety of cab interior styles and colors, brand and type of seats, type of seat fabric and color, and specific interior styling. In addition, certain of our products are only utilized in heavy-duty trucks, such as our storage systems, sleeper boxes and privacy curtains. To the extent that demand for higher content vehicles increases or decreases, our revenues and gross profit will be impacted positively or negatively.
We generally compete for new business at the beginning of the development of a new vehicle platform and upon the redesign of existing programs. New platform development generally begins one to three years before the marketing of such models by our customers. Contract durations for commercial vehicle products generally extend for the entire life of the platform. Several of the major truck makers have upgraded their truck platforms and we believe we have maintained our share of content in these platforms. We continue to pursue opportunities to expand our content.
Demand for our heavy-duty (or "Class 8") truck products is generally dependent on the number of new heavy-duty trucks manufactured in North America, which in turn is a function of general economic conditions, interest rates, changes in government regulations, consumer spending, fuel costs, freight costs, fleet operators' financial health and access to capital, used truck prices and our customers’ inventory levels. New heavy-duty truck demand has historically been cyclical and is particularly sensitive to the industrial sector of the economy, which generates a significant portion of the freight tonnage hauled by commercial vehicles. According to a February 2018 report by ACT Research, a publisher of industry market research, North American Class 8 production levels are expected to increase to 325,000 units in 2018, decrease to 238,000 units in 2020, and then increase to 280,000 units in 2022. We believe the demand for North American Class 8 vehicles in 2018 will be between 300,000 to 325,000 units. ACT Research estimates that the average age of active North American Class 8 trucks is 11.3 and 11.4 years in 2017 and 2016, respectively. As vehicles age, their maintenance costs typically increase. ACT Research forecasts that the vehicle age will decline as aging fleets are replaced.
North American medium-duty (or "Class 5-7") truck production steadily increased from 237,000 units in 2015 to 249,000 units in 2017. We believe the demand for Class 5-7 in 2018 will be stable. According to a February 2018 report by ACT Research, North American Class 5-7 truck production is expected to gradually increase to 275,000 units in 2022.
Demand for our construction and agricultural equipment products is dependent on vehicle production. Demand for new vehicles in the global construction and agricultural equipment market generally follows certain economic conditions around the world. Our products are primarily used in the medium- and heavy-duty construction equipment markets (vehicles weighing over 12 metric tons). Demand in the medium- and heavy-duty construction equipment market is typically related to the level of large scale infrastructure development projects such as highways, dams, harbors, hospitals, airports and industrial development, as well as activity in the mining, forestry and other raw material based industries. We believe the construction markets we serve in Europe, Asia, and North America have improved, and that the global agriculture markets are trending upwards.
Our Long-term Strategy

32

Table of Contents

Our long-term strategy is to grow organically by product, geographic region and end market. Our products are Seats, Trim, wire harnesses, structures, wipers, mirrors and controls. We expect to realize some end market diversification in truck and bus in Asia-Pacific and trim in Europe, with additional diversification weighted toward the agriculture market, and to a lesser extent the construction market. We intend to allocate resources consistent with our strategy; more specifically, consistent with our product portfolio, geographic region and end market diversification objectives. We periodically evaluate our long-term strategy in response to significant changes in our business environment and other factors.

Although our long-term strategy is an organic growth plan, we will consider opportunistic acquisitions to supplement our product portfolio, and to enhance our ability to serve our customers in our geographic end markets.
Strategic Footprint
We review our manufacturing footprint in the normal course to, among other considerations, provide a competitive landed cost to our customers. In November 2015, the Company announced a restructuring and cost reduction plan, which was expected to lower operating costs by $8 million to $12 million annually when fully implemented at the end of 2017. The plan is substantially complete as of December 31, 2017, and the Company believes the estimated savings were achieved.
At the time of the November 2015 announcement, the Company estimated pre-tax costs of $11 million to $16 million. The actual restructuring costs, consisting of employee-related separation costs and other costs associated with the transfer of production and subsequent closure of facilities, offset by gains on the sale of long-lived assets, totaled $6 million.
Recently Issued Accounting Pronouncements

Recently issued accounting pronouncements described in Note 2 of the “Notes to Consolidated Financial Statements” is incorporated in this section by reference.
Consolidated Results of Operations
The table below sets forth certain operating data expressed as a percentage of revenues for the periods indicated (dollars are in thousands):
 
2017
 
2016
 
2015
Revenues
$
755,231

 
100.0
 %
 
$
662,112

 
100.0
%
 
$
825,341

 
100.0
 %
Cost of revenues
662,666

 
87.7

 
574,882

 
86.8

 
714,519

 
86.6

Gross profit
92,565

 
12.3

 
87,230

 
13.2

 
110,822

 
13.4

Selling, general and administrative expenses
59,800

 
7.9

 
60,542

 
9.1

 
71,469

 
8.7

Amortization expense
1,320

 
0.2

 
1,305

 
0.2

 
1,327

 
0.2

Operating income
31,445

 
4.2

 
25,383

 
3.8

 
38,026

 
4.6

Other (income) expense
(1,349
)
 
(0.1
)
 
(769
)
 
(0.1
)
 
(152
)
 

Interest expense
19,149

 
2.5

 
19,318

 
2.9

 
21,359

 
2.6

Income before provision for income taxes
13,645

 
1.8

 
6,834

 
1.0

 
16,819

 
2.0

Provision for income taxes
15,350

 
2.0

 
49

 

 
9,758

 
1.2

Net (loss) income
(1,705
)
 
(0.2
)
 
6,785

 
1.0

 
7,061

 
0.9

Less: Non-controlling interest in subsidiary’s income

 

 

 

 
1

 

Net (loss) income attributable to common stockholders
$
(1,705
)
 
(0.2
)%
 
$
6,785

 
1.0
%
 
$
7,060

 
0.9
 %

33

Table of Contents

Year Ended December 31, 2017 Compared to Year Ended December 31, 2016

CONSOLIDATED RESULTS

Revenues. On a consolidated basis, revenues increased $93.1 million, or 14.1%, to $755.2 million for the year ended December 31, 2017 compared to $662.1 million for the year ended December 31, 2016. The increase in revenues primarily resulted from increased heavy-duty truck production volumes in North America and an improvement in the global construction equipment markets. More specifically, the increase resulted from:

a $41.6 million, or 15%, increase in OEM North American MD/HD Truck revenues;
a $40.9 million, or 32%, increase in construction equipment revenues;
a $4.6 million, or 4%, increase in aftermarket revenues; and
a $6.0 million, or 4%, increase in other revenues.

2017 revenues were favorably impacted by foreign currency exchange translation of $0.5 million, which is reflected in the change in revenue above.

Gross Profit.  Gross profit increased $5.4 million, or 6.2%, to $92.6 million for the year ended December 31, 2017 from $87.2 million for the year ended December 31, 2016. Included in gross profit is cost of revenues, which consists primarily of raw materials and purchased components for our products, wages and benefits for our employees and overhead expenses such as manufacturing supplies, facility rent and utilities costs related to our operations. Cost of revenues increased $87.8 million, or 15.3%, resulting from an increase in raw material and purchased component costs of $60.6 million, wages and benefits of $11.8 million and overhead expenses of $15.4 million. The increase in gross profit is primarily attributable to an increase in sales volume partially offset by rising commodity prices, tighter labor markets and costs associated with the sharp acceleration in North American truck build. As part of the Company's restructuring efforts, on July 19, 2016, the Company announced plans to transfer all wire harness production from the manufacturing facility in Monona, Iowa to the facility in Agua Prieta, Mexico. On May 24, 2017, the Company elected to maintain production capability in the Monona, Iowa facility as a result of a shortage of labor in our North American wire harness business. Additionally, the Company established a new facility in Mexico with better access to labor. The labor shortage and footprint adjustment in our North American wire harness business are collectively referred to as the "NA Footprint Adjustment". The NA Footprint Adjustment adversely impacted cost of revenue by approximately $10 million in 2017. Additionally, 2017 results included $1.9 million in charges relating to facility restructuring and other related costs compared to $3.4 million in the prior year period. As a percentage of revenues, gross profit was 12.3% for the year ended December 31, 2017 compared to 13.2% for the year ended December 31, 2016.

Selling, General and Administrative Expenses.  Selling, general and administrative expenses consist primarily of wages and benefits and other overhead expenses such as marketing, travel, legal, audit, rent and utilities costs, which are not directly or indirectly associated with the manufacturing of our products. Selling, general and administrative expenses decreased $0.7 million, or 1.2%, to $59.8 million for the year ended December 31, 2017 from $60.5 million for the year ended December 31, 2016. The decrease in selling, general and administrative expenses, notwithstanding the increase in revenue, reflects a continuing focus on cost discipline, partially offset by $2.4 million of litigation settlement costs for the year ended December 31, 2017. In addition, the year ended December 31, 2016 included a $0.6 million impairment of an asset held for sale.

Other Income. Other income increased $0.6 million, or 75.4%, to $1.3 million for the year ended December 31, 2017 from $0.8 million for the year ended December 31, 2016. The increase in other income is due to favorable foreign exchange on non-operating activity.

Interest Expense.  Interest expense associated with our long-term debt, was approximately $19.1 million and $19.3 million in the years ended December 31, 2017 and 2016, respectively. Included in interest expense for the year ended December 31, 2017 is a non-cash write-off of deferred financing fees of $1.6 million and a prepayment charge for interest paid of $1.5 million paid to bondholders during the 30-day notification period associated with the redemption of the 7.875% notes completed during the second quarter of 2017. These expenses were offset by lower interest expense resulting from less outstanding debt.

Provision for Income Taxes.  Our provision for income taxes was $15.4 million for the year ended December 31, 2017 compared to $49 thousand for the year ended December 31, 2016. Results for the year ended December 31, 2017 were unfavorably impacted by an estimated $11.2 million attributable to the passage of the U.S. Tax Reform. This includes a $7.2 million provision for the decrease in value of our net deferred tax assets due to a reduction of the U.S. corporate tax rate from 35% to 21% effective January 1, 2018, and a $4.0 million provision related to the deemed repatriation of accumulated untaxed earnings of certain foreign subsidiaries.

34

Table of Contents

Our provision for income taxes, excluding the impact of the U.S. Tax Reform, would have been $4.2 million for the year ended December 31, 2017 compared to $49 thousand for the year ended December 31, 2016. This increase primarily resulted from a year over year increase of pre-tax earnings, a change in the mix of income between our U.S. and non-U.S. locations and tax valuation allowances we continue to carry against net deferred tax assets in certain foreign jurisdictions, primarily Luxembourg and United Kingdom. For additional information regarding the income tax provision refer to Note 8 of our consolidated financial statements in Item 8 in this Annual Report on Form 10-K.
Net (Loss) Income Attributable to CVG Stockholders.  Net loss attributable to CVG stockholders was $1.7 million for the year ended December 31, 2017 compared to net income of $6.8 million in the prior year period.

SEGMENT RESULTS

Global Truck and Bus Segment Results

The table below sets forth certain GTB Segment operating data expressed as a percentage of revenues for the periods indicated (dollars are in thousands):
 
2017
 
2016
Revenues
$
457,770

 
100.0
%
 
$
416,279

 
100.0
%
Gross Profit
62,668

 
13.7

 
54,665

 
13.1

Selling, General & Administrative Expenses
21,507

 
4.7

 
22,557

 
5.4

Operating Income
39,983

 
8.7

 
30,943

 
7.4


Revenues.  GTB Segment revenues increased $41.5 million, or 10.0%, to $457.8 million for the year ended December 31, 2017 from $416.3 million for the year ended December 31, 2016. The increase in GTB Segment revenues is primarily a result of:

a $33.0 million, or 13%, increase in OEM MD/HD Truck revenues;
a $7.7 million, or 10%, increase in aftermarket revenues; and
a $0.8 million, or 1%, increase in revenues from other markets.

GTB Segment 2017 revenues were favorably impacted by foreign currency exchange translation of $1.1 million, which is reflected in the changes in revenue above.

Gross Profit.  GTB Segment gross profit increased $8.0 million, or 14.6%, to $62.7 million for the year ended December 31, 2017 from $54.7 million for the year ended December 31, 2016. Cost of revenues increased $33.5 million, or 9.3%, as a result of an increase in raw material and purchased component costs of $29.0 million, wages and benefits of $4.2 million and overhead expenses of $0.3 million. The increase in gross profit was primarily the result of the increase in sales volume partially offset by rising commodity prices, tightening labor markets and costs associated with the sharp acceleration in North American truck build. Additionally, 2017 results included $0.8 million in charges relating to facility restructuring and other related costs compared to $2.7 million in prior year period. As a percentage of revenues, gross profit for the year ended December 31, 2017 was 13.7% compared to 13.1% for the year ended December 31, 2016.

Selling, General and Administrative Expenses.  GTB Segment selling, general and administrative expenses decreased, notwithstanding the increase in revenues, $1.1 million, or 4.9%, to $21.5 million for the year ended December 31, 2017 from 22.6 million for the year ended December 31, 2016 reflecting a focus on cost discipline.

Global Construction and Agriculture Segment Results

The table below sets forth certain GCA Segment operating data expressed as a percentage of revenues for the periods indicated (dollars are in thousands):
 
2017
 
2016
Revenues
$
309,707

 
100.0
%
 
$
254,024

 
100.0
%
Gross Profit
31,291

 
10.1

 
$
34,060

 
13.4

Selling, General & Administrative Expenses
16,845

 
5.4

 
$
18,240

 
7.2

Operating Income
14,305

 
4.6

 
$
15,680

 
6.2



35

Table of Contents

Revenues.  GCA Segment revenues increased $55.7 million, or 21.9%, to $309.7 million for the year ended December 31, 2017 from $254.0 million for the year ended December 31, 2016. The increase in GCA Segment revenue is primarily a result of:

a $38.1 million, or 31%, increase in OEM construction equipment revenues;
a $8.6 million, or 50%, increase in OEM truck revenues;
a $4.5 million, or 12%, increase in OEM automotive revenues; and
a $4.5 million, or 6%, increase in revenues from other markets.

GCA Segment 2017 revenues were adversely impacted by foreign currency exchange translation of $0.8 million, which is reflected in the changes in revenue above.

Gross Profit.  GCA Segment gross profit decreased $2.8 million, or 8.2%, to $31.3 million for the year ended December 31, 2017 from $34.1 million for year ended December 31, 2016. Cost of revenues increased $58.5 million, or 26.6%, as a result of an increase in raw material and purchased component costs of $35.9 million, wages and benefits of $7.6 million and overhead expenses of $15.0 million. The decrease in gross profit was primarily attributable to the NA Footprint Adjustment and to rising commodity prices. Additionally, 2017 results included $1.1 million in charges relating to facility restructuring costs compared to $0.7 million in the prior year period. As a percentage of revenues, gross profit was 10.1% for the year ended December 31, 2017 compared to 13.4% for the year ended December 31, 2016.

Selling, General and Administrative Expenses.  GCA Segment selling, general and administrative expenses decreased, notwithstanding the increase in revenues, $1.4 million, or 7.7%, to $16.8 million in the year ended December 31, 2017 from $18.2 million for the year ended December 31, 2016 reflecting a focus on cost discipline.

Year Ended December 31, 2016 Compared to Year Ended December 31, 2015

Consolidated Results

Revenues. On a consolidated basis, revenue decreased $163.2 million, or 19.8%, to $662.1 million for the year ended December 31, 2016 compared to $825.3 million for the year ended December 31, 2015. The decrease in revenues primarily resulted from decreased heavy-duty truck production volumes in North America, decreased sales volume in global construction markets and unfavorable foreign currency exchange translation. More specifically, the decrease resulted from:

a $132.0 million, or 32%, decrease in OEM MD/HD Truck revenues;
a $19.1 million, or 14%, decrease in aftermarket revenues;
a $16.6 million, or 11%, decrease in construction equipment revenues; and
a $4.5 million, or 3%, increase in other revenues.

2016  revenues were adversely impacted by foreign currency exchange translation of $8.6 million, which is reflected in the change in revenue above.

Gross Profit.  Gross profit decreased $23.6 million, or 21.3%, to $87.2 million for the year ended December 31, 2016 from $110.8 million for the year ended December 31, 2015. Cost of revenues decreased $139.6 million, or 19.5%, resulting from a decrease in raw material and purchased component costs of $107.1 million, wages and benefits of $10.3 million and overhead expenses of $22.2 million. The decrease in gross profit primarily resulted from the decrease in sales volume. Additionally, 2016 results included $3.4 million in charges relating to facility restructuring costs compared to $2.1 million in the prior year period.  As a percentage of revenues, gross profit was 13.2% for the year ended December 31, 2016 compared to 13.4% for the year ended December 31, 2015.

Selling, General and Administrative Expenses.  Selling, general and administrative expenses decreased $10.9 million, or 15.3%, to $60.5 million for the year ended December 31, 2016 from $71.5 million for the year ended December 31, 2015. The decrease in selling, general and administrative expenses was primarily a result of a reduction in force and executive realignment of approximately $6.0 million in overhead and employee-related expenditures, a reduction in outside services and other cost-cutting measures of $3.0 million, driven by a decline in volume, and favorable foreign currency exchange translation of $0.7 million. Additionally, 2016 results included $0.6 million in charges relating to impairment of an asset held for sale.


36

Table of Contents

Other (Income) Expense.  Other (income) expense increased $0.6 million, or 405.9%, to $0.8 million for the year ended December 31, 2016 from $0.2 million for the year ended December 31, 2015. The increase in other (income) expense is due to proceeds from an insurance settlement.

Interest Expense.  Interest, associated with our long-term debt, and other expense was approximately $19.3 million and $21.4 million in the years ended December 31, 2016 and 2015, respectively. The decline reflects a reduction in interest expense as a result of the redemption of $15.0 million of our outstanding notes in the fourth quarter of 2015.

Provision for Income Taxes.  Our provision for income taxes decreased by $9.7 million to $49 thousand for the year ended December 31, 2016 compared to $9.8 million for the year ended December 31, 2015. This decrease primarily resulted from a change in the mix of income from our U.S. to non-U.S. locations and tax valuation allowances released in China and India during 2016. For additional information regarding the income tax provision, refer to Note 8 of our consolidated financial statements in Item 8 in this Annual Report on Form 10-K.

Net Income Attributable to CVG Stockholders.  Net income attributable to CVG stockholders was $6.8 million for the year ended December 31, 2016 compared to net income of $7.1 million.
Global Truck and Bus Segment Results
The table below sets forth certain GTB Segment operating data expressed as a percentage of revenues for the periods indicated (dollars are in thousands):
 
2016
 
2015
Revenues
$
416,279

 
100.0
%
 
$
565,269

 
100.0
%
Gross Profit
54,665

 
13.1

 
85,702

 
15.2

Selling, General & Administrative Expenses
22,557

 
5.4

 
25,263

 
4.5

Operating Income
30,943

 
7.4

 
59,252

 
10.5


Revenues.  GTB Segment revenues decreased $149.0 million, or 26.4%, to $416.3 million for the year ended December 31, 2016 from $565.3 million for the year ended December 31, 2015. The decrease in GTB Segment revenues is primarily a result of:

a $134.6 million, or 34%, decrease in OEM MD/HD Truck revenues;
a $10.0 million, or 12%, decrease in aftermarket revenues; and
a $4.4 million, or 5%, decrease in revenues from other markets.

GTB Segment 2016 revenues were adversely impacted by foreign currency exchange translation of $0.6 million, which is reflected in the changes in revenue above.

Gross Profit.  GTB Segment gross profit decreased $31.0 million, or 36.2%, to $54.7 million for the year ended December 31, 2016 from $85.7 million for the year ended December 31, 2015. Cost of revenues decreased $118.0 million, or 24.6%, as a result of a decrease in raw material and purchased component costs of $91.4 million, wages and benefits of $8.8 million and overhead expenses of $17.7 million. The decrease in gross profit was primarily the result of the decrease in sales volume. Additionally, 2016 results included $2.7 million in charges relating to facility restructuring costs compared to $1.8 million in prior year period, $1.5 million of which relates to Tigard restructuring in 2015. As a percentage of revenues, gross profit was 13.1% for the year ended December 31, 2016 compared to 15.2% for the year ended December 31, 2015.
Selling, General and Administrative Expenses. GTB Segment selling, general and administrative expenses decreased $2.7 million, or 10.7%, to $22.6 million for the year ended December 31, 2016 from $25.3 million for the year ended December 31, 2015 reflecting a focus on cost discipline.

Global Construction and Agriculture Segment Results

The table below sets forth certain GCA Segment operating data expressed as a percentage of revenues for the periods indicated (dollars are in thousands):

37

Table of Contents

 
2016
 
2015
Revenues
$
254,024

 
100.0
%
 
$
271,627

 
100.0
%
Gross Profit
34,060

 
13.4

 
28,627

 
10.5

Selling, General & Administrative Expenses
18,240

 
7.2

 
20,442

 
7.5

Operating Income
15,680

 
6.2

 
8,044

 
3.0


Revenues.  GCA Segment revenues decreased $17.6 million, or 6.5%, to $254.0 million for the year ended December 31, 2016 from $271.6 million for the year ended December 31, 2015. The decrease in GCA Segment revenue is primarily a result of:

a $13.2 million, or 10%, decrease in OEM construction equipment revenues;
a $9.2 million, or 19%, decrease in aftermarket revenues; and
a $4.8 million, or 5%, increase in revenues from other markets.

GCA Segment 2016 revenues were adversely impacted by foreign currency exchange translation of $8.6 million, which is reflected in the changes in revenue above.
Gross Profit.  GCA Segment gross profit increased $5.4 million, or 19.0%, to $34.1 million for the year ended December 31, 2016 from $28.6 million for year ended December 31, 2015. Cost of revenues decreased $23.0 million, or 9.5%, as a result of a decrease in raw material and purchased component costs of $17.1 million, wages and benefits of $1.4 million and overhead expenses of $4.5 million. The increase in gross profit, notwithstanding the decline in sales volume, was primarily a result of our cost reduction and restructuring actions for the year ended December 31, 2016. Additionally, 2016 results included $0.7 million in charges relating to facility restructuring costs compared to $0.3 million in the prior year period. As a percentage of revenues, gross profit was 13.4% for the year ended December 31, 2016 compared to 10.5% for the year ended December 31, 2015.
Selling, General and Administrative Expenses.  GCA Segment selling, general and administrative expenses decreased $2.2 million, or 10.8% to $18.2 million for the year ended December 31, 2016 from $20.4 million for the year ended December 31, 2015 reflecting a focus on cost discipline.
Liquidity and Capital Resources
During the year ended December 31, 2017, the Company did not have any borrowings under its asset-based revolver. At December 31, 2017, the Company had liquidity of $111 million; $52 million of cash and $59 million million availability from its asset-based revolver.
We intend to allocate resources consistent with the following priorities: (1) to provide liquidity; (2) to invest in growth; (3) to reduce debt; and (4) to return capital to our shareholders.
Cash Flows
Our primary source of liquidity during the year ended December 31, 2017 was cash and availability under our revolving credit facility. We believe that these sources of liquidity will provide adequate funds for our working capital needs, planned capital expenditures, and servicing of our debt through the next twelve months. However, no assurance can be given that this will be the case. We had no borrowings under our revolving credit facility during 2017.

For the year ended December 31, 2017, cash provided by operations was $2.3 million compared to $49.4 million in the year ended December 31, 2016. and $55.3 million in the year ended December 31, 2015. The decrease in cash provided by operations for the year ended December 31, 2017 compared to 2016 was primarily due to an increase in the investment in working capital in 2017 driven by the increase in sales volume. The decrease in cash provided by operations for the year ended December 31, 2016 compared to 2015 was primarily due to year over year changes in deferred income taxes offset in part by a decrease in the investment in working capital in 2016.

Net cash used in investing activities was $10.8 million for the year ended December 31, 2017 compared to $8.9 million for the year ended December 31, 2016, and $14.5 million for the year ended December 31, 2015. The increase in cash used in investing activities for the year ended December 31, 2017 compared to 2016 was due to an increase in capital expenditures in 2017. The decrease in cash used in investing activities for the year ended December 31, 2016 compared to 2015 was due primarily to a decrease in capital expenditures in 2016 and cash provided from the settlement of corporate-owned life insurance policies in 2016. In 2018, we expect capital expenditures to be in the range of $15 million to $18 million.

Net cash used in financing activities was $72.8 million for the year ended December 31, 2017 compared to $0.7 million for the year ended December 31, 2016, and $16.0 million for the year ended December 31, 2015. The increase in net cash used in financing

38

Table of Contents

activities for the year ended December 31, 2017 is attributable to the debt refinancing completed in the second quarter of 2017. The decrease in net cash used for financing activities for the year ended December 31, 2016 primarily resulted from the redemption of $15 million of our 7.875% notes in 2015.

As of December 31, 2017, cash of $38.2 million was held by foreign subsidiaries. We do not have plans to repatriate the earnings held by our foreign affiliates. We intend to use the cash to fund the growth of our foreign operations. Should our plans change with respect to cash held by our foreign subsidiaries, we would accrue and pay the appropriate withholding and local income taxes.

Debt and Credit Facilities

The debt and credit facilities described in Note 6 of the "Notes to Consolidated Financial Statements" are incorporated in this section by reference.
Contractual Obligations and Commercial Commitments
The following table reflects our contractual obligations as of December 31, 2017 (in thousands):
 
Payments Due by Period
 
Total
 

1 Year
 
2-3 Years
 
4-5 Years
 
More than
5 Years
Debt obligations
$
172,813

 
$
4,375

 
$
8,750

 
$
8,750

 
$
150,938

Estimated interest payments
64,833

 
13,138

 
25,043

 
23,460

 
3,192

Operating lease obligations
20,021

 
5,284

 
6,469

 
4,893

 
3,375

Pension and other post-retirement funding
45,314

 
4,065

 
8,736

 
8,966

 
23,547

Total
$
302,981

 
$
26,862

 
$
48,998

 
$
46,069

 
$
181,052

We estimated future interest payments based on the effective interest rate as of December 31, 2017. Since December 31, 2017, there have been no material changes outside the ordinary course of business to our contractual obligations as set forth above.
We enter into agreements with our customers at the beginning of a given vehicle platform’s life to supply products for the entire life of that vehicle platform. These agreements generally provide for the supply of a customer’s production requirements for a particular platform, rather than for the purchase of a specific quantity of products. Additionally, we have recorded a liability of $0.5 million for unrecognized tax benefits as we are uncertain as to if or when this amount may be settled. The Company also recorded $0.3 million for potential penalties and interest associated with unrecognized tax benefits. Accordingly, our obligations under these agreements and regulations are not reflected in the contractual obligations table above.
As of December 31, 2017, we were not a party to significant purchase obligations for goods or services.
Off-Balance Sheet Arrangements
We use standby letters of credit to guarantee our performance under various contracts and arrangements, principally in connection with our workers’ compensation liabilities. These letter of credit contracts are usually extended on a year-to-year basis. As of December 31, 2017, we had outstanding letters of credit of $2.1 million. We do not believe that these letters of credit will be drawn.
We currently have no non-consolidated special purpose entity arrangements.
Critical Accounting Policies and Estimates
Our consolidated financial statements are prepared in conformity with accounting principles generally accepted in the United States of America (“U.S. GAAP”). For a comprehensive discussion of our significant accounting policies, see Note 2 to our consolidated financial statements in Item 8 in this Annual Report on Form 10-K.
The preparation of our consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. We evaluate our estimates and assumptions on an ongoing basis, particularly relating to accounts receivable reserves, inventory reserves, goodwill, intangible and long-lived assets, income taxes, warranty reserves, litigation reserves and pension and other post-retirement benefit plans. We base our estimates on historical experience and other assumptions that we believe are reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets, liabilities and equity that are not readily apparent from other sources. Actual results and outcomes could differ materially from these estimates and assumptions. See Item 1A - Risk Factors in this Annual Report on Form 10-K for additional information regarding risk factors that may impact our estimates.

39

Table of Contents

Revenue Recognition — We recognize revenue when (1) delivery has occurred or services have been rendered, (2) persuasive evidence of an arrangement exists, (3) there is a fixed or determinable price and (4) collectability is reasonably assured. Our products are generally shipped from our facilities to our customers, which is when legal title passes to the customer for substantially all of our revenues. We enter into agreements with our customers at the beginning of a given vehicle platform’s life to supply products for that vehicle platform. Once we enter into such agreements, fulfillment of our requirements is our obligation for the entire production life of the platform and we have no provisions to terminate such contracts. At the time of revenue recognition, we also record estimates for returns and allowances based on historical trends and current market conditions.
Inventory — Inventories are valued at the lower of first-in, first-out cost or market. Cost includes applicable material, labor and overhead. We value our finished goods inventory at a standard cost that is periodically adjusted to approximate actual cost. Inventory quantities on-hand are regularly reviewed, and where necessary, provisions for excess and obsolete inventory are recorded based primarily on our estimated production requirements driven by expected market volumes.
Income Taxes — We recognize deferred tax assets and liabilities for the expected future tax consequences of events that have been included in our financial statements or tax returns. Deferred tax assets and liabilities are determined based on the difference between the financial statements and tax basis of assets and liabilities using enacted tax laws and rates expected to be in place when the deferred tax items are realized. We recognize tax positions initially in the financial statements when it is more likely than not the position will be sustained upon examination by the tax authorities. We provide a valuation allowance for deferred tax assets when it is more likely than not that a portion of such deferred tax assets will not be realized.
On December 22, 2017, the U.S. Tax Reform significantly revised the U.S. corporate income tax law. The SEC issued the Staff Accounting Bulletin ("SAB") 118 to address the accounting implications of the U.S Tax Reform. The effects of the U.S. Tax Reform are recognized upon enactment, however, SAB 118 permits a company to recognize provisional amounts when it does not have the necessary information available. The measurement period to finalize our calculations cannot extend beyond one year of the enactment date. The tax provision related to the deemed repatriation of accumulated untaxed earnings of foreign subsidiaries represents the Company’s best estimate. Any adjustments recorded to the provisional amounts will be included in income from operations as an adjustment to tax expense. The provisional amounts incorporate assumptions made based upon the Company’s current interpretation of the U.S. Tax Reform and may change as the Company receives additional clarification and implementation guidance.
Due to the complexity of the new Global Intangible Low-Taxed Income (“GILTI”) tax rules, the Company continues to evaluate this provision of the U.S. Tax Reform and the application of ASC 740, Income Taxes. The Company will analyze its global activities to determine whether it expects to have future inclusions in U.S. taxable income related to GILTI provisions, and is not yet able to reasonably estimate the impact of this provision of the U.S. Tax Reform. Therefore, the Company has not made a policy decision or any adjustments related to potential GILTI tax in its financial statements.

Item 7A.
Quantitative and Qualitative Disclosures About Market Risk
We are exposed to various market risks, including changes in foreign currency exchange rates and interest rates. Market risk is the potential loss arising from adverse changes in market rates and prices, such as foreign currency exchange and interest rates. We do not enter into derivatives or other financial instruments for trading or speculative purposes. We enter into financial instruments, from time to time, to manage the impact of changes in foreign currency exchange rates and interest rates and to hedge a portion of future anticipated currency transactions. The counterparties are primarily major financial institutions.
Interest Rate Risk
We have the ability to manage our interest rate risk by balancing the amount of our fixed rate and variable rate debt. For fixed rate debt, interest rate changes affect the fair market value of such debt but do not impact earnings or cash flows. Conversely for variable rate debt, interest rate changes generally do not affect the fair market value of such debt, but do impact future earnings and cash flows, assuming other factors are held constant. The interest on the Term Loan Facility is variable and is comprised of 1) an Applicable Margin in the case of Term loans of either (i) 5.00% for Base Rate Loans or (ii) 6.00% for LIBOR loans, and 2) LIBOR as quoted two business days prior to the commencement of an interest period provided that LIBOR at no time falls below 1.00%.
The Company entered into an interest rate swap contract to fix the interest rate on an initial aggregate amount of $80.0 million of its initial $175.0 million of variable rate debt thereby reducing exposure to interest rate changes. At December 31, 2017, the interest rate swap agreement was not designated as a hedging instrument; therefore, our interest rate swap agreement has been marked-to-market and the fair value recorded in the Consolidated Balance Sheets with the offsetting gain or loss recorded in interest and other expense in our Consolidated Statements of Operations.

40

Table of Contents

The interest rate swap agreement is more fully described in Note 3 to our consolidated financial statements in Item 8 of this Annual Report on Form 10-K. The fair value of the agreement at December 31, 2017 amounted to long-term asset of $0.5 million, which was included in other long-term assets in our Consolidated Balance Sheets, and a current liability of $0.2 million, which was included in accrued liabilities and other in our Consolidated Balance Sheets.
Foreign Currency Risk
Foreign currency risk is the risk that we will incur economic losses due to adverse changes in foreign currency exchange rates. We use forward exchange contracts to hedge certain foreign currency transaction exposures. We estimate our projected revenues and purchases in certain foreign currencies or locations and will hedge a portion or all of the anticipated long or short position. The contracts typically run from one month up to eighteen months. All existing forward foreign exchange contracts have been marked-to-market and the fair value of contracts recorded in the Consolidated Balance Sheets with the offsetting noncash gain or loss recorded in our Consolidated Statements of Operations. We do not hold or issue foreign exchange options or forward contracts for trading purposes.
Outstanding foreign currency forward exchange contracts at December 31, 2017 are more fully described in Note 3 to our consolidated financial statements in Item 8 of this Annual Report on Form 10-K. The fair value of our contracts at December 31, 2017 amounted to a net liability of $0.6 million, which was included in other current liabilities in our Consolidated Balance Sheets. The fair value of our contracts at December 31, 2016 amounted to a net liability of $1.1 million, which was included in other current liabilities in our Consolidated Balance Sheets. None of these contracts have been designated as cash flow hedges; thus, the change in fair value at each reporting date is reflected as a noncash charge (income) in our Consolidated Statements of Operations.
Our primary exposures to foreign currency forward exchange contracts are Mexican peso/U.S. dollar and Japanese yen/Chinese yuan. At December 31, 2017 and 2016, the potential reduction in earnings from a hypothetical instantaneous 10% adverse change in quoted foreign currency spot rates applied to foreign currency sensitive instruments would be immaterial.
Foreign Currency Transactions
A portion of our revenues during the year ended December 31, 2017 were derived from manufacturing operations outside of the U.S. The results of operations and the financial position of our operations in these other countries are primarily measured in their respective currency and translated into U.S. dollars. A portion of the expenses incurred in these countries is in currencies different from which revenue is generated. As discussed above, from time to time, we enter into forward exchange contracts to mitigate a portion of this currency risk. The reported income of these operations will be higher or lower depending on a weakening or strengthening of the U.S. dollar against the respective foreign currency.
A portion of our long-term assets and liabilities at December 31, 2017 are based in our foreign operations and are translated into U.S. dollars at foreign currency exchange rates in effect as of the end of each period, with the effect of such translation reflected as a separate component of stockholders’ equity. Accordingly, our stockholders’ investment will fluctuate depending upon the weakening or strengthening of the U.S. dollar against the respective foreign currency. The principal currencies of exposure are the British Pound, Chinese Yuan, Euro, Czech Koruna, Australian Dollar, Japanese Yen, Mexican Peso, Indian Rupee and Ukrainian Hryvnia. Foreign currency translation favorably impacted fiscal year 2017 revenues by $0.5 million, or 0.1 percent.
Effects of Inflation
Inflation potentially affects us in two principal ways. First, any borrowings under our revolving credit facility is tied to prevailing short-term interest rates that may change as a result of inflation rates, translating into changes in interest expense. Second, general inflation can impact material purchases, labor and other costs. In many cases, we have limited ability to pass through inflation-related cost increases due to the competitive nature of the markets that we serve. Although inflation has not had a significant impact in the past few years, the rise in certain commodity prices in 2017 negatively impacted our margins.

41

Table of Contents

Item 8.
Financial Statements and Supplementary Data
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS
Documents Filed as Part of this Annual Report on Form 10-K
 
 
 
Page

42

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM


To the Stockholders and Board of Directors
Commercial Vehicle Group, Inc.:

Opinion on the Consolidated Financial Statements
We have audited the accompanying consolidated balance sheets of Commercial Vehicle Group, Inc. and subsidiaries (the Company) as of December 31, 2017 and 2016, the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for each of the years in the three‑year period ended December 31, 2017, and the related notes and financial statement schedule II: Valuation of Qualifying Accounts (collectively, the consolidated financial statements). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2017 and 2016, and the results of its operations and its cash flows for each of the years in the three‑year period ended December 31, 2017, in conformity with U.S. generally accepted accounting principles.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company’s internal control over financial reporting as of December 31, 2017, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission, and our report dated March 12, 2018 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.
Basis for Opinion
These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

/s/ KPMG LLP

We have served as the Company’s auditor since 2012.
Columbus, Ohio
March 12, 2018

43

Table of Contents

COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
December 31, 2017 and 2016  
 
2017
 
2016
 
(In thousands, except share and
per share amounts)
ASSETS
 
 
 
 
Current Assets:
 
 
 
Cash
$
52,244

 
$
130,160

Accounts receivable, net of allowances of $5,242 and $3,881, respectively
108,595

 
97,793

Inventories
99,015

 
71,054

Other current assets
14,792

 
9,941

Total current assets
274,646

 
308,948

Property, Plant and Equipment
 
 
 
Land and buildings
25,942

 
28,203

Machinery and equipment
183,556

 
167,541

Construction in progress
2,685

 
8,176

Less accumulated depreciation
(147,553
)
 
(137,879
)
Property, plant and equipment, net
64,630

 
66,041

Goodwill
8,045

 
7,703

Intangible assets, net of accumulated amortization of $8,533 and $7,048, respectively
14,548

 
15,511

Deferred income taxes, net
20,273

 
28,587

Other assets
2,246

 
1,975

TOTAL ASSETS
$
384,388

 
$
428,765

LIABILITIES AND STOCKHOLDERS’ EQUITY
 
 
 
Current Liabilities:
 
 
 
Accounts payable
$
86,608

 
$
60,556

Accrued liabilities and other
33,944

 
45,699

Current portion of long-term debt
3,191

 

Total current liabilities
123,743

 
106,255

Long-term debt
163,758

 
233,154

Pension and other post-retirement liabilities
15,450

 
18,938

Other long-term liabilities
6,695

 
2,728

Total liabilities
309,646

 
361,075

Commitments and contingencies (Note 10)


 


Stockholders’ Equity:
 
 
 
Preferred stock, $.01 par value (5,000,000 shares authorized; no shares issued and outstanding)

 

Common stock, $.01 par value (60,000,000 shares authorized; 30,219,278 and 29,871,354 shares issued and outstanding, respectively);
304

 
299

Treasury stock, at cost: 1,175,795 and 1,014,413 shares, respectively
(9,114
)
 
(7,753
)
Additional paid-in capital
239,870

 
237,367

Retained deficit
(115,083
)
 
(113,378
)
Accumulated other comprehensive loss
(41,235
)
 
(48,845
)
Total stockholders’ equity
74,742

 
67,690

TOTAL LIABILITIES AND STOCKHOLDERS' EQUITY
$
384,388

 
$
428,765

The accompanying notes are an integral part of these consolidated financial statements.

44

Table of Contents

COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF OPERATIONS
Years Ended December 31, 2017, 2016 and 2015
 
 
2017
 
2016
 
2015
 
(In thousands, except per share amounts)
Revenues
$
755,231

 
$
662,112

 
$
825,341

Cost of revenues
662,666

 
574,882

 
714,519

Gross Profit
92,565

 
87,230

 
110,822

Selling, general and administrative expenses
59,800

 
60,542

 
71,469

Amortization expense
1,320

 
1,305

 
1,327

Operating Income
31,445

 
25,383

 
38,026

Other income
(1,349
)
 
(769
)
 
(152
)
Interest expense
19,149

 
19,318

 
21,359

Income Before Provision for Income Taxes
13,645

 
6,834

 
16,819

Provision for income taxes
15,350

 
49

 
9,758

Net (loss) income
(1,705
)
 
6,785

 
7,061

Less: Non-controlling interest in subsidiary’s income

 

 
1

Net (loss) income attributable to CVG
$
(1,705
)
 
$
6,785

 
$
7,060

(Loss) earnings per common share
 
 
 
 
 
Basic
$
(0.06
)
 
$
0.23

 
$
0.24

Diluted
$
(0.06
)
 
$
0.23

 
$
0.24

Weighted average shares outstanding
 
 
 
 
 
Basic
29,942

 
29,530

 
29,209

Diluted
29,942

 
29,878

 
29,399





























The accompanying notes are an integral part of these consolidated financial statements.

45

Table of Contents

COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)
Years Ended December 31, 2017, 2016 and 2015
 
 
 
2017
 
2016
 
2015
 
 
(In thousands)
Net (loss) income
 
$
(1,705
)
 
$
6,785

 
$
7,061

Other comprehensive income (loss):
 
 
 
 
 
 
Foreign currency translation adjustments
 
7,141

 
(3,234
)
 
(4,572
)
Minimum pension liability, net of tax
 
469

 
(5,957
)
 
2,206

Other comprehensive income (loss)
 
7,610

 
(9,191
)
 
(2,366
)
Comprehensive income (loss)
 
$
5,905

 
$
(2,406
)
 
$
4,695

Less: Comprehensive loss attributed to noncontrolling interests
 

 

 
(35
)
Comprehensive income (loss) attributable to CVG stockholders
 
$
5,905

 
$
(2,406
)
 
$
4,730










































The accompanying notes are an integral part of these consolidated financial statements.

46

Table of Contents

COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY
Years Ended December 31, 2017, 2016 and 2015

 
Common Stock
Treasury
Stock
Additional
Paid-In
Capital
Retained
Deficit
Accum.
Other
Comp.
Loss
Total CVG
Stockholders’
Equity
Non-
Controlling
Interest
Total
 
Shares
Amount
 
(In thousands, except share data )
BALANCE - December 31, 2014
29,148,504

$
296

$
(6,622
)
$
231,907

$
(129,492
)
$
(37,288
)
$
58,801

$
35

$
58,836

Issuance of restricted stock
400,195

4





4


4

Surrender of common stock by employees
(99,920
)
(6
)
(417
)



(423
)

(423
)
Share-based compensation expense



2,853



2,853


2,853

Total comprehensive (loss) income




7,061

(2,366
)
4,695

(35
)
4,660

BALANCE - December 31, 2015
29,448,779

$
294

$
(7,039
)
$
234,760

$
(122,431
)
$
(39,654
)
$
65,930

$

$
65,930

Issuance of restricted stock
557,584

$
5

$

$

$

$

$
5

$

$
5

Surrender of common stock by employees
(135,009
)

(714
)



(714
)

(714
)
Share-based compensation expense



2,607



2,607


2,607

Recognition of excess tax benefits on share-based compensation expense




2,268


2,268


2,268

Total comprehensive (loss) income




6,785

(9,191
)
(2,406
)

(2,406
)
BALANCE - December 31, 2016
29,871,354

$
299

$
(7,753
)
$
237,367

$
(113,378
)
$
(48,845
)
$
67,690

$

$
67,690

Issuance of restricted stock
509,306

$
5

$

$

$

$

$
5

$

$
5

Surrender of common stock by employees
(161,382
)

(1,361
)



(1,361
)

(1,361
)
Share-based compensation expense



2,503



2,503


2,503

Total comprehensive (loss) income




(1,705
)
7,610

5,905


5,905

BALANCE - December 31, 2017
30,219,278

$
304

$
(9,114
)
$
239,870

$
(115,083
)
$
(41,235
)
$
74,742

$

$
74,742













The accompanying notes are an integral part of these consolidated financial statements.

47

Table of Contents

COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
Years Ended December 31, 2017, 2016 and 2015
 
 
2017
 
2016
 
2015
 
(In thousands)
CASH FLOWS FROM OPERATING ACTIVITIES:
 
 
 
 
 
Net (loss) income
$
(1,705
)
 
$
6,785

 
$
7,061

Adjustments to reconcile net (loss) income to net cash provided by operating activities:
 
 
 
 
 
Depreciation and amortization
15,344

 
16,451

 
17,710

Provision for doubtful accounts
5,622

 
5,552

 
4,640

Noncash amortization of debt financing costs
1,251

 
840

 
1,059

Loss on early extinguishment of debt

 

 
591

Shared-based compensation expense
2,503

 
2,607

 
2,853

(Gain) loss on sale of assets
(586
)
 
80

 
596

Deferred income taxes
7,992

 
(2,525
)
 
8,157

Noncash (gain) loss on forward exchange contracts
(726
)
 
603

 
151

Impairment of equipment held for sale

 
616

 

Change in other operating items:
 
 
 
 
 
Accounts receivable
(13,794
)
 
25,501

 
166

Inventories
(25,104
)
 
2,993

 
6,761

Prepaid expenses
(814
)
 
(978
)
 
(3,743
)
Accounts payable
23,250

 
(4,263
)
 
(3,642
)
Accrued liabilities
(12,284
)
 
(1,997
)
 
8,211

Other operating activities, net
1,308

 
(2,900
)
 
4,728

Net cash provided by operating activities
2,257

 
49,365

 
55,299

CASH FLOWS FROM INVESTING ACTIVITIES:
 
 
 
 
 
Purchases of property, plant and equipment
(13,458
)
 
(11,429
)
 
(14,685
)
Proceeds from disposal/sale of property, plant and equipment
2,682

 
37

 
108

Proceeds from corporate-owned life insurance policies

 
2,489

 

Other investing activities, net

 

 
71

Net cash used in investing activities
(10,776
)
 
(8,903
)
 
(14,506
)
CASH FLOWS FROM FINANCING ACTIVITIES:
 
 
 
 
 
Borrowings of Term Loan Facility
175,000






Repayment of Term Loan principal
(2,188
)





Surrender of common stock by employees
(1,361
)
 
(714
)
 
(417
)
Redemption of Notes
(235,000
)
 


(15,000
)
Prepayment charge for redemption of 7.875% Notes
(1,543
)
 

 

Prepayment of Term Loan Facility Discount
(3,500
)
 

 

Payment of Debt Issuance Costs
(4,256
)
 

 

Early payment fee on debt and other debt issuance costs

 

 
(591
)
Net cash used in financing activities
(72,848
)
 
(714
)
 
(16,008
)
EFFECT OF CURRENCY EXCHANGE RATE CHANGES ON CASH
3,451

 
(1,782
)
 
(2,682
)
NET (DECREASE) INCREASE IN CASH
(77,916
)
 
37,966

 
22,103

CASH:
 
 
 
 
 
Beginning of period
130,160

 
92,194

 
70,091

End of period
$
52,244

 
$
130,160

 
$
92,194

SUPPLEMENTAL CASH FLOW INFORMATION:
 
 
 
 
 
Cash paid for interest
$
18,572

 
$
18,684

 
$
19,939

Cash paid for income taxes, net
$
3,276

 
$
2,495

 
$
1,545

Unpaid purchases of property and equipment included in accounts payable
$
109

 
$
488

 
$
905


The accompanying notes are an integral part of these consolidated financial statements.

48

Table of Contents

COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
Years Ended December 31, 2017, 2016 and 2015
 
1.
Organization

Commercial Vehicle Group, Inc. (and its subsidiaries) is a leading supplier of a full range of cab related products and systems for the global commercial vehicle market, including the medium- and heavy-duty truck (“MD/HD Truck”) market, the medium- and heavy-duty construction vehicle market, and the bus, agriculture, military, specialty transportation, mining, industrial equipment and off-road recreational markets.  References herein to the "Company", "we", "our", or "us" refer to Commercial Vehicle Group, Inc. and its subsidiaries.

We have manufacturing operations in the United States, Mexico, United Kingdom, Czech Republic, Ukraine, China, India and Australia. Our products are primarily sold in North America, Europe, and the Asia-Pacific region.

Our products include seats and seating systems (“Seats”); trim systems and components (“Trim”); cab structures, sleeper boxes, body panels and structural components; mirrors, wipers and controls; and electric wire harness and panel assemblies designed for applications primarily in commercial vehicles.

We are differentiated from automotive industry suppliers by our ability to manufacture low volume, customized products on a sequenced basis to meet the requirements of our customers. We believe our products are used by a majority of the North American MD/HD Truck and certain leading global construction and agriculture original equipment manufacturers (“OEMs”), which we believe creates an opportunity to cross-sell our products.
Our operations are comprised of two reportable segments, Global Truck and Bus (“GTB”) and Global Construction and Agriculture (“GCA”). The Company’s Chief Operating Decision Maker (“CODM”), its President and Chief Executive Officer, reviews financial information for these two reportable segments and makes decisions regarding the allocation of resources based on these segments.

Unless otherwise indicated, all amounts are in thousands, except share and per share amounts.
2.
Significant Accounting Policies
Principles of Consolidation - The accompanying consolidated financial statements include the accounts of our wholly-owned or controlled subsidiaries. All intercompany accounts and transactions have been eliminated in consolidation.

Use of Estimates - The preparation of financial statements in conformity with accounting principles generally accepted in the U.S. of America (“U.S. GAAP”) requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. Significant estimates include allowance for doubtful accounts, returns and allowances, inventory reserves, goodwill, intangible and long-lived assets, pension and other post-retirement benefits, product warranty reserves, litigation reserves, and income tax valuation allowances. Actual results may differ materially from those estimates.

Reclassifications - Certain reclassifications to the Consolidated Cash Flows have been made to prior year amounts to conform to current year presentation.

Cash - Cash consists of deposits with high credit-quality financial institutions.

Accounts Receivable - Trade accounts receivable are stated at current value less allowances, which approximates fair value. We review our receivables on an ongoing basis to ensure that they are properly valued and collectible. This is accomplished through two contra-receivable accounts - returns and allowances and allowance for doubtful accounts.
Returns and allowances are used to record estimates of returns or other allowances resulting from quality, delivery, discounts or other issues affecting the value of receivables. This amount is estimated based on historical trends and current market conditions, with the offset to revenues.
The allowance for doubtful accounts is used to record the estimated risk of loss related to the customers’ inability to pay. This allowance is maintained at a level that we consider appropriate based on factors that affect collectability, such as the financial health of our customers, historical trends of charge-offs and recoveries and current economic market conditions. As we monitor our receivables, we identify customers that may have payment problems, and we adjust the allowance accordingly, with the offset

49

Table of Contents

to selling, general and administrative expense. Account balances are charged off against the allowance when recovery is considered remote.
Inventories - Inventories are valued at the lower of first-in, first-out cost or market. Inventory quantities on-hand are regularly reviewed and when necessary provisions for excess and obsolete inventory are recorded based primarily on our estimated production requirements, taking into consideration expected market volumes and future potential use.
Property, Plant and Equipment - Property, plant and equipment are stated at cost, net of accumulated depreciation. For financial reporting purposes, depreciation is computed using the straight-line method over the following estimated useful lives:
Buildings and improvements
15 to 40 years
Machinery and equipment
3 to 20 years
Tools and dies
3 to 7 years
Computer hardware and software
3 to 5 years
Expenditures for maintenance and repairs are charged to expense as incurred. Expenditures for major betterments and renewals that extend the useful lives of property, plant and equipment are capitalized and depreciated over the remaining useful lives of the asset. When assets are retired or sold, the cost and related accumulated depreciation are removed from the accounts and any resulting gain or loss is recognized in the results of operations. Leasehold improvements are amortized using the straight-line method over the estimated useful lives of the improvements or the term of the lease, whichever is shorter. Accelerated depreciation methods are used for tax reporting purposes. Depreciation expense for each of the years ended December 31, 2017, 2016 and 2015 was $14.0 million, $15.1 million and $16.4 million, respectively.
We review long-lived assets for recoverability whenever events or changes in circumstances indicate that carrying amounts of an asset group may not be recoverable. Our asset groups are established by determining the lowest level of cash flows available. If the estimated undiscounted cash flows are less than the carrying amounts of such assets, we recognize an impairment loss in an amount necessary to write down the assets to fair value as estimated from expected future discounted cash flows. Estimating the fair value of these assets is judgmental in nature and involves the use of significant estimates and assumptions. We base our fair value estimates on assumptions we believe to be reasonable, but that are inherently uncertain.
Revenue Recognition - We recognize revenue when 1) delivery has occurred or services have been rendered, 2) persuasive evidence of an arrangement exists, 3) there is a fixed or determinable price, and 4) collectability is reasonably assured. Title on our products generally passes to the customer when product is shipped from our facilities to our customers.
Income Taxes - We recognize deferred tax assets and liabilities for the expected future tax consequences of events that have been included in our financial statements or tax returns. Deferred tax assets and liabilities are determined based on the difference between the financial statements and tax basis of assets and liabilities based on enacted tax laws and rates expected to be in place when the deferred tax items are realized. In assessing the realizability of deferred tax assets, we consider whether it is more likely than not that a portion of the deferred tax assets will not be realized. We provide a valuation allowance for deferred tax assets when it is more likely than not that a portion of such deferred tax assets will not be realized.

We evaluate tax positions for recognition by determining, based on the weight of available evidence, whether it is more likely than not the position will be sustained upon audit. Any interest and penalties related to our uncertain tax positions are recognized in income tax expense.
On December 22, 2017, the U.S. Tax Cuts and Jobs Act of 2017 ("U.S. Tax Reform") was signed into law. The U.S. Tax Reform significantly revised the U.S. corporate income tax regime by, among other things, lowering the U.S. corporate tax rate from 35% to 21% effective January 1, 2018, establishing a quasi territorial tax system and imposing a one-time tax on the deemed repatriation of earnings of foreign subsidiaries. The tax provision related to the deemed repatriation of accumulated untaxed earnings of foreign subsidiaries represents the Company's best estimate. This provisional amount incorporates assumptions made based upon the Company's current interpretation of the U.S. Tax Reform and may change as the Company receives additional clarification, implementation guidance and finalization of foreign tax returns. Any adjustments to the provisional amount will be recognized as a component of the provision for income taxes in the period in which such adjustments are determined, but in any event no later than the fourth quarter of 2018.
Due to the complexity of the new Global Intangible Low-Taxed Income (“GILTI”) tax rules, the Company continues to evaluate this provision of the U.S. Tax Reform and the application of ASC 740, Income Taxes. The Company will analyze its global activities to determine whether it expects to have future inclusions in U.S. taxable income related to GILTI provisions, and is not yet able

50

Table of Contents

to reasonably estimate the impact of this provision of the U.S. Tax Reform. Therefore, the Company has not made a policy decision or any adjustments related to potential GILTI tax in its financial statements.
Comprehensive Income (Loss) - Comprehensive income (loss) reflects the change in equity of a business enterprise during a period from transactions and other events and circumstances from non-owner sources. Comprehensive income (loss) represents net income adjusted for foreign currency translation adjustments and minimum pension liability adjustments. See Note 15 for a rollforward of activity in accumulated comprehensive loss.
Fair Value of Financial Instruments - The fair value framework requires the categorization of assets and liabilities into three levels based upon the assumptions (i.e., inputs) used to price the assets or liabilities. Level 1 provides the most reliable measure of fair value, whereas Level 3 generally requires significant management judgment. The three levels are defined as follows:
Level 1 - Unadjusted quoted prices in active markets for identical assets and liabilities.
Level 2 - Observable inputs other than those included in Level 1. For example, quoted prices for similar assets or liabilities in active markets or quoted prices for identical assets or liabilities in inactive markets.
Level 3 - Significant unobservable inputs reflecting management’s own assumptions about the inputs used in pricing the asset or liability.
Concentrations of Credit Risk - Financial instruments that potentially subject us to concentrations of credit risk consist primarily of accounts receivable. We sell products to various companies throughout the world in the ordinary course of business. We routinely assess the financial strength of our customers and maintain allowances for anticipated losses. As of December 31, 2017 and 2016, receivables from our largest customers, A.B. Volvo, Daimler Trucks, Caterpillar, Navistar, John Deere and PACCAR, represented approximately 59% and 64% of total receivables, respectively.
Foreign Currency Translation - Our functional currency is the local currency. Accordingly, all assets and liabilities of our foreign subsidiaries are translated using exchange rates in effect at the end of the period and revenue and costs are translated using average exchange rates for the period. The related translation adjustments are reported in accumulated other comprehensive loss in stockholders’ equity. Translation gains and losses arising from transactions denominated in a currency other than the functional currency of the entity are included in the results of operations.
Foreign Currency Forward Exchange Contracts - We use forward exchange contracts to hedge certain of the foreign currency transaction exposures. We estimate our projected revenues and purchases in certain foreign currencies or locations, and hedge a portion of the anticipated long or short position. The contracts typically run from one month up to eighteen months. All forward foreign exchange contracts are not designated as hedging instruments and have been marked-to-market and the fair value of contracts recorded in the Consolidated Balance Sheets with the offsetting non-cash gain or loss recorded in our Consolidated Statements of Operations. We do not hold or issue foreign exchange options or forward contracts for trading purposes.
Interest Rate Swap Agreement - We use an interest rate swap agreement to fix the interest rate on variable interest debt thereby reducing exposure to interest rate changes. The interest rate swap contract was not designated as a hedging instrument; therefore, our interest rate swap contract has been marked-to-market and the fair value of the contract recorded in the Consolidated Balance Sheets with the offsetting gain or loss recorded in interest and other expense in our Consolidated Statements of Operations.
Recently Issued Accounting Pronouncements
In February 2018, the Financial Accounting Standards Board ("FASB") issued Accounting Standards Update ("ASU") No. 2018-02, "Income Statement - Reporting Comprehensive Income (Topic 220): Reclassification of Certain Tax Effects from Accumulated Other Comprehensive Income". The amendments in ASU No. 2018-02 allow for a reclassification from accumulated other comprehensive income to retained earnings for stranded tax effects resulting from the Tax Cuts and Jobs Act. The Company will record a reclassification for the restatement of deferred taxes associated with the Company's pension and post-retirement plans. ASU 2018-02 is effective for fiscal years beginning after December 15, 2018.
In May 2017, the FASB issued ASU No. 2017-09, "Compensation - Stock Compensation (Topic 718): Scope of Modification Accounting". ASU 2017-09 provides clarity of accounting for modifications of share-based awards. The Company does not anticipate this ASU will have a material impact on share-based compensation. ASU 2017-09 is effective for fiscal years beginning after December 15, 2017.
In March 2017, the FASB issued ASU No. 2017-07, "Compensation - Retirement Benefits (Topic 715): Improving the Presentation of Net Periodic Pension Cost and Net Periodic Postretirement Benefit Cost". ASU 2017-07 requires employers to report service costs in the same line item as compensation costs arising from services rendered by associated employees during the period. The Company does not anticipate this ASU to have a material impact on its pension disclosures. ASU 2017-07 is effective for fiscal years beginning after December 15, 2017.

51

Table of Contents

In January 2017, the FASB issued ASU No. 2017-04, "Intangibles - Goodwill and Other (Topic 350): Simplifying the Test for Goodwill Impairment". ASU 2017-04 provides simplification for the subsequent measurement of goodwill by eliminating Step 2 from the goodwill impairment test. Annual impairment tests should be completed by comparing the fair value of a reporting unit to its carrying amount and impairment should not exceed the goodwill allocated to the reporting unit. Additionally, this ASU eliminated the requirement to assess reporting units with zero or negative carrying amounts. The Company anticipates this ASU to simplify a component of its goodwill assessment. The Company does not anticipate an impact to its overall valuation of goodwill. ASU 2017-04 is effective for fiscal years beginning after December 15, 2019.
In January 2017, the FASB issued ASU No. 2017-01, "Business Combinations (Topic 805): Clarifying the Definition of a Business". ASU 2017-01 provides additional guidance to clarify acquisition transactions and whether they should be accounted for as an acquisition of a business or assets. This ASU will only impact the Company to the extent we execute a business combination. ASU 2017-01 is effective for fiscal years beginning after December 15, 2017.
Revenue Recognition Guidance

In May 2014, the FASB issued ASU 2014-09, "Revenue from Contracts with Customers (Topic 606)". ASU 2014-09 supersedes the revenue recognition requirements in ASC Topic 605, "Revenue Recognition", and most industry-specific guidance. The core principle of the guidance is that an entity should recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. Companies will be required to provide more disclosure regarding the nature, amount, timing and uncertainty of cash flows. Additionally, companies must disclose performance obligations to customers and significant inputs, assumptions and methodologies impacting the timing of recognition. During 2016, the FASB also issued ASU 2016-08, "Revenue from Contracts with Customers: Principal versus Agent Considerations (Reporting Revenue Gross versus Net)" ASU 2016-10, "Revenue from Contracts with Customers: Identifying Performance Obligations and Licensing" ASU 2016-11, "Rescission of SEC Guidance Because of Accounting Standards Updates 2014-09 and 2014-16 Pursuant to Staff Announcements at the March 3, 2016 EITF Meeting" ASU 2016-12, "Revenue from Contracts with Customers: Narrow-Scope Improvements and Practical Expedients" and ASU 2016-20, "Technical Corrections and Improvements to Topic 606, Revenue from Contracts with Customers", all of which were issued to improve and clarify the guidance in ASU 2014-09.
The mandatory adoption date of each of the revenue recognition ASUs referenced above is January 1, 2018. Under guidance in effect as of December 31, 2017, we typically recognized revenue when products are shipped and risk of loss has transferred to the customer. Under the new guidance, the customized nature of some of our products and provisions of some of our customer contracts provide us with an enforceable right to payment. Based on our current customer contracts, we do not anticipate the need to adjust the timing of when revenue is recognized. We evaluated our customer owned tooling, engineering and design services, and pre-production customer arrangements under the new guidance and determined that we would not be required to change the timing of revenue recognition or presentation of revenue and costs associated with such arrangements. We assessed standard customer warranties to determine if they represent a material right to the customer and determined that the new guidance will not have a material impact on our Consolidated Balance Sheets, Statements of Operations, Statements of Stockholders' Equity, or Statements of Cash Flows. We will apply the cumulative effect transition method.
Lease Accounting Guidance
In February 2016, the FASB issued ASU No. 2016-02, "Leases (Topic 842)." ASU 2016-02 is intended to increase transparency and comparability among companies by recognizing lease assets and liabilities and disclosing key information about leasing arrangements. ASU 2016-02 is effective for fiscal years beginning after December 15, 2018. The Company is assessing the impact of this pronouncement and anticipates it will impact the presentation of our lease assets and liabilities and associated disclosures by the recognition of lease assets and liabilities that are not included in the Consolidated Balance Sheets under existing accounting guidance. The Company is reviewing its population of lease arrangements, including facility leases and machinery and equipment leases. The lease terms are not generally complex in nature. The Company will update its accounting policies as we complete our assessment of leases. The Company will also review other arrangements which could contain embedded lease arrangements to be considered under the revised guidance. The Company will determine the impact of the new guidance on its current lease arrangements that are expected to remain in place during 2019 and beyond.
3.
Fair Value Measurement
At December 31, 2017, our financial instruments consisted of cash, accounts receivable, accounts payable, accrued liabilities and our revolving credit facility. The carrying value of these instruments approximates fair value as a result of the short duration of such instruments or due to the variability of the interest cost associated with such instruments.
Foreign Currency Forward Exchange Contracts. Our derivative assets and liabilities represent foreign exchange purchase and sales contracts that are measured at fair value using observable market inputs such as forward rates, interest rates, our own credit

52

Table of Contents

risk and counterparty credit risk. Based on the utilization of these inputs, the derivative assets and liabilities are classified as Level 2.
Interest Rate Swap Agreement. The Company’s policy is to manage its interest expense by using a mix of fixed and variable rate debt. To manage its exposure to variable interest rates in a cost-efficient manner, the Company enters into interest rate swaps in which the Company agrees to exchange, at specified intervals, the difference between fixed and variable interest amounts calculated by reference to an agreed-upon notional principal amount. These swaps are designed to mitigate changes in the interest rate of a portion of the outstanding borrowings. The Company entered into a series of interest rate swaps to initially cover $80 million of its outstanding debt under the senior secured term loan facility. The Company expects these derivatives to remain effective during the remaining term of the swaps and will record the impact in interest expense in the Consolidated Statements of Operations.

The fair values of our derivative assets and liabilities measured on a recurring basis as of December 31 are categorized as follows:
 
 
2017
 
2016
 
 
Total
 
Level 1
 
Level 2
 
Level 3
 
Total
 
Level 1
 
Level 2
 
Level 3
Derivative assets
Foreign exchange contract 1
$
20

 
$

 
$
20

 
$

 
$
142

 
$

 
$
142

 
$

Interest rate swap agreement 2
$
515

 
$

 
$
515

 
$

 
$

 
$

 
$

 
$

Derivative liabilities
Foreign exchange contract 3
$
627

 
$

 
$
627

 
$

 
$
1,234

 
$

 
$
1,234

 
$

Interest rate swap agreement 4
$
246

 
$

 
$
246

 
$

 
$

 
$

 
$

 
$

 
1 
Presented in the Consolidated Balance Sheets in other current assets and based on observable market transactions of spot and forward rates.
2 
Presented in Consolidated Balance Sheets in other assets and based on observable market transactions of forward rates.
3 
Presented in the Consolidated Balance Sheets in accrued liabilities and other and based on observable market transactions of spot and forward rates.
4 
Presented in Consolidated Balance Sheets in accrued liabilities and other, and based on observable market transactions of forward rates.
The following table summarizes the notional amount of our open foreign exchange contracts at December 31:
 
2017
 
2016
 
U.S. $
Equivalent
 
U.S.
Equivalent
Fair Value
 
U.S. $
Equivalent
 
U.S.
Equivalent
Fair Value
Commitments to buy or sell currencies
$
17,491

 
$
16,838

 
$
18,593

 
$
17,213

We consider the impact of our credit risk on the fair value of the contracts, as well as the ability to execute obligations under the contract.
The following table summarizes the effect of derivative instruments on the Consolidated Statements of Operations for derivatives not designated as hedging instruments at December 31:
 
 
 
2017
 
2016
 
Location of Gain (Loss)
Recognized in Income on
Derivatives
 
Amount of Gain (Loss)
Recognized in Income on
Derivatives
Foreign exchange contracts
Cost of Revenues
 
$
457

 
$
(603
)
Interest rate swap agreement
Interest Income
 
$
269

 
$

Long-term Debt.   The fair value of long-term debt obligations is based on a fair value model utilizing observable inputs. Based on the use of these inputs, our long-term debt is classified as Level 2. The carrying amounts and fair values of our long-term debt at December 31 are as follows:

53

Table of Contents

 
2017
 
2016
 
Carrying
Amount
 
Fair Value
 
Carrying
Amount
 
Fair Value
7.875% senior secured notes due April 15, 2019
$

 
$

 
$
233,154

 
$
231,391

Term loan and security agreement 1
$
166,949

 
$
169,972

 
$

 
$

1 
Presented in the Consolidated Balance Sheets as the current portion of long-term debt (net of current prepaid debt financing costs and current original issue discount) of $3.2 million and long-term debt (net of long-term prepaid debt financing costs and long-term original issue discount) of $163.8 million.
Long-lived Assets. There are no fair value measurements of our long-lived assets and definite-lived intangible assets measured on a non-recurring basis as of December 31, 2017 and December 31, 2016, except for an impairment of $0.6 million recognized in the first quarter of 2016 for an asset held for sale based on the estimated selling price less selling costs of $0.8 million . The asset was classified as held for sale at its estimated fair value of $0.8 millionas of December 31, 2016. The impairment was recorded in selling, general and administrative expense in the Consolidated Statements of Operations. The asset was classified as Level 2.
4.
Inventories
Inventories consisted of the following as of December 31:
 
2017
 
2016
Raw materials
$
73,026

 
$
46,352

Work in process
10,136

 
11,234

Finished goods
15,853

 
13,468

 
$
99,015

 
$
71,054

5.
Accrued and Other Liabilities
Accrued and other liabilities consisted of the following as of December 31:
 
2017
 
2016
Compensation and benefits
$
12,904

 
$
10,435

Taxes payable
3,564

 
2,517

Warranty costs
3,490

 
5,552

Insurance
2,432

 
5,237

Legal and professional fees
1,588

 
2,827

Accrued freight
1,544

 
1,465

Accrued services
1,207

 
1,309

Deferred tooling revenue
806

 
2,773

Interest
146

 
3,892

Restructuring
43

 
2,271

Other
6,220

 
7,421


$
33,944


$
45,699

 
6.
Debt
Debt consisted of the following at December 31:
 
2017
 
2016
7.875% senior secured notes due April 15, 2019
$

 
$
233,154

Term loan and security agreement 1
$
166,949


$

1 
Presented in the Consolidated Balance Sheets as the current portion of long-term debt (net of current prepaid debt financing costs of $0.6 million and current original issue discount of $0.6 million) of $3.2 million and long-term debt (net of long-term prepaid debt financing costs of $2.2 million and long-term original issue discount of 2.4 million) of $163.8 million.
Term Loan and Security Agreement

54

Table of Contents

On April 12, 2017, the Company entered into a $175.0 million senior secured term loan credit facility (the “Term Loan Facility”), maturing on April 12, 2023, pursuant to a term loan and security agreement (the “TLS Agreement”) with the Company and certain subsidiaries of the Company party thereto as guarantors, Bank of America, N.A., as administrative agent, and other lender parties thereto. Concurrent with the closing of the TLS Agreement, the proceeds of the Term Loan Facility were used, together with cash on hand in the amount of $74.0 million, to (a) fund the redemption, satisfaction and discharge of all of the Company’s outstanding 7.875% notes along with accrued interest; and (b) pay related transaction costs, fees and expenses. In conjunction with the redemption of the 7.875% notes, the Company recognized a non-cash charge of $1.6 million in the second quarter of 2017 to write-off deferred financing fees and a prepayment charge for interest of $1.5 million paid to bondholders during the 30-day notification period associated with the redemption of the 7.875% notes.

The interest on the Term Loan Facility is variable and is comprised of 1) an Applicable Margin in the case of Term loans of either (i) 5.00% for Base Rate Loans or (ii) 6.00% for LIBOR loans, and 2) LIBOR as quoted two business days prior to the commencement of an interest period provided that LIBOR at no time falls below 1.00%. There was $0.1 million in accrued interest as of December 31, 2017. The unamortized deferred financing fees of $2.8 million and original issue discount of $3.0 million are netted against the aggregate book value of the outstanding debt to arrive at a balance of $166.9 million as of December 31, 2017 and are being amortized over the remaining life of the agreement. The weighted average interest rate was 7.22% as of December 31, 2017.
The Term Loan Facility is a senior secured obligation of the Company. Our obligations under the TLS Agreement are guaranteed by the Company and certain subsidiaries of the Company. The obligations of the Company and the guarantors under the TLS Agreement are secured (subject to certain permitted liens) by a first-priority lien on substantially all of the non-current assets (and a second priority lien on substantially all of the current assets) of the Company and the guarantors, including a first priority pledge of certain capital stock of the domestic and foreign subsidiaries directly owned by the Company and the guarantors. The liens, the security interests and all of the obligations of the Company and the guarantors and all provisions regarding remedies in an event of default are subject to an intercreditor agreement among the Company, the guarantors, the agent for the lenders party to the Company’s revolving credit facility and the collateral agent under the TLS Agreement.
Terms, Covenants and Compliance Status
The TLS Agreement contains customary restrictive covenants, including limitations on our ability and the ability of our subsidiaries to: incur additional debt; pay dividends or other restricted payments; make investments; engage in transactions with affiliates; create liens on assets; and consolidate, merge or transfer all or substantially all of our assets and the assets of our subsidiaries. In addition, the TLS Agreement contains a financial maintenance covenant requiring the Company to maintain a total leverage ratio as of the last day of any fiscal quarter not to exceed the ratios set forth in the applicable table within the TLS Agreement. The TLS Agreement also contains customary reporting and other affirmative covenants. We were in compliance with the covenants as of December 31, 2017.
The TLS Agreement requires the Company to repay principal of approximately $1.1 million on the last day of each quarter commencing with the quarter ending September 30, 2017 with the remaining outstanding principal due at maturity on April 12, 2023.
Voluntary prepayments of amounts outstanding under the TLS Agreement are permitted at any time, without premium or penalty; provided, however, that a prepayment penalty equal to 1.0% of the prepaid amount is required to be paid in connection with certain events that have the effect of reducing the all-in-yield applicable to the term loan during the 12 months following the initial funding thereof. In addition, to the extent applicable, customary LIBOR breakage charges may be payable in connection with any prepayment.
The TLS Agreement requires the Company to make mandatory prepayments with excess cash flow, the proceeds of certain asset dispositions and upon the receipt of insurance or condemnation proceeds, and in the case of an asset disposition or insurance or condemnation event, to the extent the Company does not reinvest the proceeds within the periods set forth in the TLS Agreement.
The TLS Agreement includes customary events of default (subject in certain cases to customary grace and cure periods) which include, among others:
• nonpayment of obligations when due;
• breach of covenants or other agreements in the TLS Agreement; and
• defaults in payment of certain other indebtedness.
Revolving Credit Facility

55

Table of Contents

On April 12, 2017, Commercial Vehicle Group Inc. and certain subsidiaries, collectively the "borrowers", entered into the Third Amended and Restated Loan and Security Agreement ("Third ARLS Agreement") increasing its senior secured revolving credit facility to $65 million from $40 million and setting the maturity date to April 12, 2022. Up to an aggregate of $10.0 million is available to the borrowers for the issuance of letters of credit, which reduces availability under the Third ARLS Agreement.
The Third ARLS Agreement included amendments to certain definitions and covenants including, but not limited to, amendments to (i) permitted debt, (ii) permitted distributions, (iii) distribution of assets, and (iv) the calculation of EBITDA. The Third ARLS Agreement contains a fixed charge coverage ratio maintenance covenant of 1.00:1.00 and amended the availability threshold for triggering compliance with the fixed charge coverage ratio.
The borrowers’ obligations under the revolving credit facility are secured (subject to certain permitted liens) by a first-priority lien on substantially all of the current assets (and a second priority lien on substantially all of the non-current assets) of the borrowers. Each of the Company and each other borrower is jointly and severally liable for the obligations under the revolving credit facility and unconditionally guarantees the prompt payment and performance thereof. The liens, the security interests and all of the obligations of the Company and each other borrower and all provisions regarding remedies in an event of default are subject to an intercreditor agreement among the Company, certain of its subsidiaries, the agent under the Third ARLS Agreement and the collateral agent for the lenders party to the Company’s term loan credit facility.
The applicable margin is based on average daily availability under the revolving credit facility as follows:
Level
 
Average Daily
Availability
 
Domestic Base
Rate  Loans
 
LIBOR
Revolver Loans
III
 
≥ to $24,000,000
 
0.50%
 
1.50%
II
 
> $12,000,000 but < $24,000,000
 
0.75%
 
1.75%
I
 
≤ to $12,000,000
 
1.00%
 
2.00%
The applicable margin will be subject to increase or decrease by the agent on the first day of the calendar month following each fiscal quarter end. If the agent is unable to calculate average daily availability for a fiscal quarter due to borrowers' failure to deliver a borrowing base certificate when required, the applicable margin will be set at Level I until the first day of the calendar month following receipt of a borrowing base certificate. As of December 31, 2017, the applicable margin was set at Level III.
The unamortized deferred financing fees associated with our revolving credit facility of $0.9 million and $0.1 million as of December 31, 2017 and December 31, 2016, respectively, are being amortized over the remaining life of the agreement. As of December 31, 2017 and December 31, 2016, we did not have borrowings under the revolving credit facility and had outstanding letters of credit of $2.1 million and $2.5 million, respectively. We had borrowing availability of $58.6 million at December 31, 2017.
The Company pays a commitment fee to the lenders equal to 0.25% per annum of the unused amounts under the revolving credit facility.
Terms, Covenants and Compliance Status
The Third ARLS Agreement requires the maintenance of a minimum fixed charge coverage ratio. The borrowers however are not required to comply with the fixed charge coverage ratio requirement for as long as the borrowers maintain borrowing availability under the revolving credit facility at the greater of (i) $5,000,000 or (ii) ten percent (10%) of the revolving commitments. If borrowing availability falls below this threshold at any time, the borrowers would be required to comply with the fixed charge coverage ratio of 1.00:1.00 as of the end of each relevant fiscal quarter, and would be required to continue to comply with these requirements until the borrowers have borrowing availability in excess of this threshold for 60 consecutive days. Since the Company had borrowing availability in excess of this threshold from December 31, 2016 through December 31, 2017, the Company was not required to comply with the minimum fixed charge coverage ratio covenant during the year ended December 31, 2017.
The Third ARLS Agreement contains customary restrictive covenants, including limitations on our ability and the ability of our subsidiaries to: incur additional debt; pay dividends or other restricted payments; make investments; engage in transactions with affiliates; create liens on assets; and consolidate, merge or transfer all or substantially all of our assets and the assets of our subsidiaries. The Third ARLS Agreement also contains customary reporting and other affirmative covenants. The Company was in compliance with these covenants as of December 31, 2017.
Voluntary prepayments of amounts outstanding under the revolving credit facility are permitted at any time, without premium or penalty, other than (to the extent applicable) customary LIBOR breakage charges and the aforementioned prepayment penalty.

56

Table of Contents

The Third ARLS Agreement requires the borrowers to make mandatory prepayments upon the receipt of insurance or condemnation proceeds in respect of the revolving credit facility’s priority collateral.
The Third ARLS Agreement includes customary events of default (subject in certain cases to customary grace and cure periods) which include, among others:

nonpayment of obligations when due;
breach of covenants or other agreements in the Third ARLS Agreement;
a change of control; and
defaults in payment of certain other indebtedness, including the term loan credit facility.
7.
Goodwill and Intangible Assets
Our intangible assets as of December 31 were comprised of the following:
 
December 31, 2017
 
Weighted-
Average
Amortization
Period
 
Gross
Carrying
Amount
 
Accumulated
Amortization
 
Currency Translation Adjustment
 
Net
Carrying
Amount
Definite-lived intangible assets:
 
 
 
 
 
 
 
 
 
Trademarks/Tradenames
23 years
 
$
8,472

 
$
(3,639
)
 
$
54

 
$
4,887

Customer relationships
15 years
 
14,609

 
(4,991
)
 
43

 
9,661

 
 
 
$
23,081

 
$
(8,630
)
 
$
97

 
$
14,548

 
December 31, 2016
 
Weighted-
Average
Amortization
Period
 
Gross
Carrying
Amount
 
Accumulated
Amortization
 
Currency Translation Adjustment
 
Net
Carrying
Amount
Definite-lived intangible assets:
 
 
 
 
 
 
 
 
 
Trademarks/Tradenames
23 years
 
$
8,378

 
$
(3,283
)
 
$
90

 
$
5,185

Customer relationships
15 years
 
14,181

 
(4,027
)
 
172

 
10,326

 
 
 
$
22,559

 
$
(7,310
)
 
$
262

 
$
15,511

The aggregate intangible asset amortization expense was $1.3 million for each of the fiscal years ended December 31, 2017, 2016 and 2015. The estimated intangible asset amortization expense for each of the five succeeding fiscal years ending after December 31, 2017 is $1.3 million per year through December 31, 2019 and $1.2 million in 2020 through 2022.
The changes in the carrying amounts of goodwill for the years ended December 31 are as follows:
 
2017
 
2016
Balance - Beginning of the year
$
7,703

 
$
7,834

Currency translation adjustment
342

 
(131
)
Balance - End of the year
$
8,045

 
$
7,703

8.
Income Taxes
Pre-tax income (loss) consisted of the following for the years ended December 31:
 
2017
 
2016
 
2015
Domestic
$
(2,093
)
 
$
(13,928
)
 
$
16,819

Foreign
15,738

 
20,762

 

Total
$
13,645

 
$
6,834

 
$
16,819

A reconciliation of income taxes computed at the statutory rates to the reported income tax provision for the years ended December 31 follows:

57

Table of Contents

 
2017
 
2016
 
2015
Federal provision at statutory rate
$
4,776

 
$
2,392

 
$
5,887

U.S./Foreign tax rate differential
(919
)
 
(1,842
)
 
1

Foreign non-deductible expenses
(2,006
)
 
743

 
(479
)
Foreign tax provision
615

 
336

 
296

State taxes, net of federal benefit
73

 
(171
)
 
556

State tax rate change, net of federal benefit
(264
)
 
541

 
32

Change in uncertain tax positions
81

 
114

 
236

Change in valuation allowance
2,475

 
(1,858
)
 
3,283

Tax credits
(152
)
 
(104
)
 
(283
)
Share-based compensation
(657
)
 
(108
)
 
459

Change in U.S. corporate tax rate
7,214

 

 

Repatriation of foreign earnings
3,964

 

 

Other
150

 
6

 
(230
)
Provision for income taxes
$
15,350

 
$
49

 
$
9,758

The provision (benefit) for income taxes for the years ended December 31 follows:
 
2017
 
2016
 
2015
 
Current
 
Deferred
 
Total
 
Current
 
Deferred
 
Total
 
Current
 
Deferred
 
Total
Federal
$
2,954

 
$
7,716

 
$
10,670

 
$
(4
)
 
$
(1,801
)
 
$
(1,805
)
 
$
(153
)
 
$
6,077

 
$
5,924

State and local
362

 
(371
)
 
(9
)
 
(27
)
 
1,021

 
994

 
380

 
389

 
769

Foreign
4,042

 
647

 
4,689

 
2,605

 
(1,745
)
 
860

 
1,374

 
1,691

 
3,065

Total
$
7,358

 
$
7,992

 
$
15,350

 
$
2,574

 
$
(2,525
)
 
$
49

 
$
1,601

 
$
8,157

 
$
9,758

A summary of deferred income tax assets and liabilities as of December 31 follows:
 
2017
 
2016
Noncurrent deferred tax assets:
 
 
 
Amortization and fixed assets
$
1,835

 
$
4,109

Accounts receivable
396

 
815

Inventories
2,254

 
2,899

Pension obligations
2,903

 
4,623

Warranty obligations
973

 
2,519

Accrued benefits
787

 
1,060

Foreign exchange contracts
89

 
460

Restricted stock
73

 
145

Tax credits carryforwards
1,611

 
2,238

Net operating loss carryforwards
24,784

 
20,130

Other temporary differences not currently available for tax purposes
(411
)
 
2,135

Total noncurrent deferred tax assets
$
35,294

 
$
41,133

Valuation allowance
(15,021
)
 
(12,546
)
Net noncurrent deferred tax assets
$
20,273

 
$
28,587

Noncurrent deferred tax liabilities:
 
 
 
Amortization and fixed assets
$
(100
)
 
$
(764
)
Net operating loss carryforwards

 
2,178

Other temporary differences not currently available for tax purposes
60

 
(1,430
)
Total noncurrent tax liabilities
(40
)
 
(16
)
Total net deferred tax asset
$
20,233

 
$
28,571


58

Table of Contents

Our overall deferred tax position was a net deferred tax asset of $20.2 million. The $8.3 million change in our net deferred tax asset position includes a $7.2 million reduction attributable to the decrease in U.S. corporate tax rate from 35% to 21% effective January 1, 2018. Staff Accounting Bulletin ("SAB") 118 addresses the accounting implications of the U.S Tax Reform. Under SAB 118, the assessment of the $7.2 million remeasurement of our net deferred tax asset position is complete.
The U.S. Tax Reform gave rise to a provision of $4.0 million on the deemed repatriation of accumulated untaxed earnings of foreign subsidiaries. Under SAB 118, the assessment of the $4.0 million of accumulated untaxed earnings of foreign subsidiaries is reasonably estimated. The measurement period to finalize our calculations cannot extend beyond one year of the enactment date. Any adjustments recorded to the provisional amounts will be included in income from operations as an adjustment to tax expense in the period the amounts are determined.
We assess whether valuation allowances should be established against deferred tax assets based on consideration of all available evidence using a “more likely than not” standard. This assessment considers, among other matters, the nature, frequency and severity of recent losses, forecasts of future profitability, the duration of statutory carryforward periods, our experience with unused tax attributes expiring and tax planning alternatives. In making such judgments, significant weight is given to evidence that can be objectively verified.
During 2017, we recorded additional valuation allowances of $2.3 million in certain foreign affiliates, notably Luxembourg and United Kingdom, due to pre-tax losses or a decrease in earnings in the current year. We increased a valuation allowance of $0.2 million for deferred assets associated with certain U.S. state tax net operating loss carry forwards. We expect to be able to realize the benefits of all of our deferred tax assets that are not currently offset by a valuation allowance, as discussed above. In the event that our actual results differ from our estimates or we adjust these estimates in future periods, the effects of these adjustments could materially impact our financial position and results of operations.
As of December 31, 2017, we had $71.5 million of foreign, $24.0 million of U.S. federal and $65.6 million of U.S. state net operating loss carryforwards available to offset future taxable income. Utilization of these losses is subject to the tax laws of the applicable tax jurisdiction and may be limited by the ability of certain subsidiaries to generate taxable income in the associated tax jurisdiction. Generally, our net operating loss carryforwards continue through 2037. Although some of our net operating loss carryforwards expire beginning in 2018, there are certain tax jurisdictions with no expiration dates. We have established valuation allowances for all net operating losses that we believe are more likely than not to expire before they can be utilized.
As of December 31, 2017, we had $1.6 million of research and development tax credits being carried forward related to our U.S. operations. Utilization of these credits may be limited by the ability to generate federal taxable income in future years; the credits will expire between 2026 and 2038.
As of December 31, 2017, cash of $38.2 million was held by foreign subsidiaries. We do not have any plans to repatriate the earnings held by our foreign affiliates and consider these earnings to be indefinitely reinvested. Rather, we intend to use the cash to fund the growth of our foreign operations. Should our plans change with respect to cash held by our foreign subsidiaries, we would accrue and pay the appropriate withholding and local income taxes.
We file federal income tax returns in the U.S. and income tax returns in various states and foreign jurisdictions. With few exceptions, we are no longer subject to income tax examinations by any of the taxing authorities for years before 2014.
As of December 31, 2017, and 2016, we provided a liability of $0.5 million and $0.6 million, respectively, for unrecognized tax benefits related to U.S. federal and state, and foreign jurisdictions. These unrecognized tax benefits are netted against their related noncurrent deferred tax assets.
We accrue interest and penalties related to unrecognized tax benefits through income tax expense. We had $0.3 million and $0.2 million accrued for the payment of interest and penalties as of December 31, 2017 and December 31, 2016, respectively. Accrued interest and penalties are included in the $0.5 million of unrecognized tax benefits.

59

Table of Contents

A reconciliation of the beginning and ending amount of unrecognized tax benefits (including interest and penalties) at December 31 follows:
 
2017
 
2016
 
2015
Balance - Beginning of the year
$
628

 
$
489

 
$
27

Gross increase - tax positions in prior periods
68

 
40

 
445

Gross decreases - tax positions in prior periods
(38
)
 

 

Gross increases - current period tax positions
29

 
103

 
44

Lapse of statute of limitations
(221
)
 
(4
)
 
(27
)
Currency translation adjustment
19

 

 

Balance - End of the year
$
485

 
$
628

 
$
489


60

Table of Contents

9.
Segment Reporting and Geographic Locations
Operating segments are defined as components of an enterprise that are evaluated regularly by the Company’s CODM, which is our President and Chief Executive Officer. The Company has two reportable segments: the GTB Segment and the GCA Segment. Each of these segments consists of a number of manufacturing facilities. Certain of our facilities manufacture and sell products through both of our segments. Each manufacturing facility that sells products through both segments is reflected in the financial results of the segment that has the greatest amount of sales from that manufacturing facility. Our segments are more specifically described below.
The GTB Segment manufactures and sells the following products:
 
Seats, Trim, sleeper boxes, cab structures, structural components and body panels. These products are sold primarily to the MD/HD Truck markets in North America;
Seats to the truck and bus markets in Asia-Pacific and Europe;
Mirrors and wiper systems to the truck, bus, agriculture, construction, rail and military markets in North America;
Trim to the recreational and specialty vehicle markets in North America; and
Aftermarket seats and components in North America.

The GCA Segment manufactures and sells the following products:
 
Electric wire harness assemblies and Seats for construction, agricultural, industrial, automotive, mining and military industries in North America, Europe and Asia-Pacific;
Seats to the truck and bus markets in Asia-Pacific and Europe;
Wiper systems to the construction and agriculture markets in Europe;
Office seating in Europe and Asia-Pacific; and
Aftermarket seats and components in Europe and Asia-Pacific.
Corporate expenses consist of certain overhead and shared costs that are not directly attributable to the operations of a segment. For purposes of business segment performance measurement, some of these costs that are for the benefit of the operations are allocated based on a combination of methodologies. The costs that are not allocated to a segment are considered stewardship costs and remain at corporate in our segment reporting.
The following table presents segment revenues, gross profit, depreciation and amortization expense, selling, general and administrative expenses, operating income, capital expenditures and other items for the year ended December 31, 2017. The table does not include assets as the CODM does not review assets by segment.
 
 
For the year ended December 31, 2017
 
Global
Truck &
Bus
 
Global
Construction &
Agriculture
 
Corporate/
Other
 
Total
Revenues
 
 
 
 
 
 
 
External Revenues
$
455,864


$
299,367


$


$
755,231

Intersegment Revenues
1,906


10,340


(12,246
)


Total Revenues
$
457,770


$
309,707


$
(12,246
)

$
755,231

Gross Profit
$
62,668


$
31,291


$
(1,394
)

$
92,565

Depreciation and Amortization Expense
$
7,875


$
4,736


$
2,733


$
15,344

Selling, General & Administrative Expenses 
$
21,507


$
16,845


$
21,448


$
59,800

Operating Income
$
39,983


$
14,305


$
(22,843
)

$
31,445

 
 
 
 
 
 
 
 
Capital Expenditures and Other Items:
 
 
 
 
 
 
 
  Capital Expenditures
$
6,290


$
5,324


$
1,953


$
13,567

Other Items 1
$
777


$
1,146


$
2,377


$
4,300

1 Other items include costs associated with restructuring activities, including employee severance and retention costs, lease cancellation costs, building repairs, costs to transfer equipment, and litigation settlement costs associated with a consulting contract.

61

Table of Contents

The following table presents segment revenues, gross profit, depreciation and amortization expense, selling, general and administrative expenses, operating income, capital expenditures and other items for the year ended December 31, 2016. The table does not include assets as the CODM does not review assets by segment.
 
For the year ended December 31, 2016
 
Global
Truck &
Bus
 
Global
Construction &
Agriculture
 
Corporate/
Other
 
Total
Revenues
 
 
 
 
 
 
 
External Revenues
$
415,154

 
$
246,958

 
$

 
$
662,112

Intersegment Revenues
1,125

 
7,066

 
(8,191
)
 

Total Revenues
$
416,279

 
$
254,024

 
$
(8,191
)
 
$
662,112

Gross Profit
$
54,665

 
$
34,060

 
$
(1,495
)
 
$
87,230

Depreciation and Amortization Expense
$
8,545

 
$
5,581

 
$
2,325

 
$
16,451

Selling, General & Administrative Expenses
$
22,557

 
$
18,240

 
$
19,745

 
$
60,542

Operating Income
$
30,943

 
$
15,680

 
$
(21,240
)
 
$
25,383

 
 
 
 
 
 
 
 
Capital Expenditures and Other Items:
 
 
 
 
 
 
 
  Capital Expenditures
$
6,384


$
4,609


$
924


$
11,917

Other Items 1
$
2,712


$
723


$
688


$
4,123

1 Other items include costs associated with restructuring activities, including employee severance and retention costs, lease cancellation costs, building repairs, costs to transfer equipment, and the write down of an asset held for sale.
The following table presents segment revenues, gross profit, depreciation and amortization expense, selling, general and administrative expenses, operating income, capital expenditures and other items as of and for the year ended December 31, 2015. The table does not include assets as the CODM does not review assets by segment.
 
 
For the year ended December 31, 2015
 
Global
Truck &
Bus
 
Global
Construction &
Agriculture
 
Corporate/
Other
 
Total
Revenues
 
 
 
 
 
 
 
External Revenues
$
564,651

 
$
260,690

 
$

 
$
825,341

Intersegment Revenues
618

 
10,937

 
(11,555
)
 

Total Revenues
$
565,269

 
$
271,627

 
$
(11,555
)
 
$
825,341

Gross Profit
$
85,702

 
$
28,627

 
$
(3,507
)
 
$
110,822

Depreciation and Amortization Expense
$
8,909

 
$
5,855

 
$
2,946

 
$
17,710

Selling, General & Administrative Expenses
$
25,263

 
$
20,442

 
$
25,764

 
$
71,469

Operating Income
$
59,252

 
$
8,044

 
$
(29,270
)
 
$
38,026

 
 
 
 
 
 
 
 
Capital Expenditures and Other Items:
 
 
 
 
 
 
 
Capital Expenditures
$
7,579

 
$
4,688

 
$
3,323

 
$
15,590

Other Items 1
$
1,838

 
$
494

 
$

 
$
2,332

1 Other items include costs associated with restructuring activities, including employee severance and retention costs, lease cancellation costs, building repairs and costs to transfer equipment.
The following table presents revenues and long-lived assets for the geographic areas in which we operate:

62

Table of Contents

 
Years Ended December 31,
 
2017
 
2016
 
2015
 
Revenues
 
Long-lived
Assets
 
Revenues
 
Long-lived
Assets
 
Revenues
 
Long-lived
Assets
United States
$
560,412

 
$
50,207

 
$
496,473

 
$
54,334

 
$
635,627

 
$
59,280

All other countries
194,819

 
14,423

 
165,639

 
11,707

 
189,714

 
11,681

 
$
755,231

 
$
64,630

 
$
662,112

 
$
66,041

 
$
825,341

 
$
70,961

Revenues are attributed to geographic locations based on the geography from which the legal entity operates. Included in all other countries are intercompany sales eliminations.
The following is the composition by product category of our revenues:
 
Years Ended December 31,
 
2017
 
2016
 
2015
 
Revenues
 
%
 
Revenues
 
%
 
Revenues
 
%
Seats and seating systems
$
314,717

 
42
 
$
280,575

 
42
 
$
339,724

 
41
Electric wire harnesses and panel assemblies
189,154

 
25
 
149,417

 
23
 
154,417

 
19
Trim systems and components
150,228

 
20
 
132,623

 
20
 
179,713

 
22
Cab structures, sleeper boxes, body panels and structural components
56,417

 
7
 
57,605

 
9
 
96,046

 
12
Mirrors, wipers and controls
44,715

 
6
 
41,892

 
6
 
55,441

 
6
 
$
755,231

 
100
 
$
662,112

 
100
 
$
825,341

 
100
10.
Commitments and Contingencies
Leases - We lease office, warehouse and manufacturing space, and certain equipment under non-cancelable operating lease agreements that require us to pay maintenance, insurance, taxes and other expenses in addition to annual rentals. Lease expense under these arrangements was $12.0 million, $10.6 million and $11.3 million in 2017, 2016 and 2015, respectively. Capital lease agreements entered into by us are immaterial. Anticipated future lease costs are based in part on certain assumptions to approximate minimum annual rental commitments at December 31, 2017 under non-cancelable operating leases are as follows:
Year Ending December 31,
 
 
2018
 
$
5,284

2019
 
$
3,799

2020
 
$
2,670

2021
 
$
2,511

2022
 
$
2,382

  Thereafter
 
$
3,375

Guarantees - We accrue for costs associated with guarantees when it is probable that a liability has been incurred and the amount can be reasonably estimated. The most likely cost to be incurred is accrued based on an evaluation of currently available facts, and where no amount within a range of estimates is more likely, the minimum is accrued. As of December 31, 2017 and 2016, we had no such guarantees.
Litigation - We are subject to various legal proceedings and claims arising in the ordinary course of business, including but not limited to workers' compensation claims, OSHA investigations, employment disputes, service provider disputes, intellectual property disputes, and disputes arising out of alleged defects, breach of contracts, product warranties and environmental matters. Management believes that we maintain adequate insurance or we have established reserves for issues that are probable and estimable in amounts that are adequate to cover reasonable adverse judgments not covered by insurance. Based upon the information available to management and discussions with legal counsel, it is the opinion of management that the ultimate outcome of the various legal actions and claims that are incidental to our business will not have a material adverse impact on the consolidated financial position, results of operations or cash flows; however, such matters are subject to many uncertainties and the outcomes of individual matters are not predictable with assurance.
Warranty - We are subject to warranty claims for products that fail to perform as expected due to design or manufacturing deficiencies. Depending on the terms under which we supply products to our customers, a customer may hold us responsible for

63

Table of Contents

some or all of the repair or replacement costs of defective products when the product supplied did not perform as represented. Our policy is to record provisions for estimated future customer warranty costs based on historical trends and for specific claims. These amounts, as they relate to the years ended December 31, 2017 and 2016 are included within accrued liabilities and other in the accompanying Consolidated Balance Sheets. The following presents a summary of the warranty provision for the years ended December 31:
 
2017
 
2016
Balance - Beginning of the year
$
5,552

 
$
7,580

Provision for new warranty claims
3,461

 
1,798

Change in provision for preexisting warranty claims
(1,065
)
 
389

Deduction for payments made
(4,579
)
 
(3,819
)
Currency translation adjustment
121

 
(396
)
Balance - End of year
$
3,490

 
$
5,552


Debt Payments - As disclosed in Note 6, the TLS Agreement requires the Company to repay a fixed amount of principal on a quarterly basis, make mandatory prepayments of excess cash flows, and voluntary prepayments that coincide with certain events.

The following table provides future minimum principal payments due on long-term debt for the next five fiscal years and the remaining years thereafter:

Year Ending December 31,
2018
 
$
4,375

2019
 
$
4,375

2020
 
$
4,375

2021
 
$
4,375

2022
 
$
4,375

Thereafter
 
$
150,938

11.
Stockholders’ Equity
Common Stock - Our authorized capital stock consists of 60,000,000 shares of common stock with a par value of $0.01 per share, with 30,219,278 and 29,871,354 shares outstanding as of December 31, 2017 and 2016, respectively.
Preferred Stock - Our authorized capital stock consists of 5,000,000 shares of preferred stock with a par value of $0.01 per share, with no shares outstanding as of December 31, 2017 and 2016.
(Loss) Earnings Per Share - Basic (loss) earnings per share is determined by dividing net income by the weighted average number of common shares outstanding during the year. Diluted (loss) earnings per share presented is determined by dividing net income by the weighted average number of common shares and potential common shares outstanding during the period as determined by the Treasury Stock Method. Potential common shares are included in the diluted earnings per share calculation when dilutive.
Diluted (loss) earnings per share for years ended December 31, 2017, 2016 and 2015 includes the effects of potential common shares when dilutive and is as follows:
 
2017
 
2016
 
2015
Net (loss) income attributable to common stockholders
$
(1,705
)
 
$
6,785

 
$
7,060

Weighted average number of common shares outstanding
29,942

 
29,530

 
29,209

Dilutive effect of restricted stock grants after application of the treasury stock method

 
348

 
190

 
 
 
 
 
 
Dilutive shares outstanding
29,942

 
29,878

 
29,399

Basic and dilutive (loss) earnings per share attributable to common stockholders
$
(0.06
)
 
$
0.23

 
$
0.24

For the years ended December 31, 2017 and 2016, diluted (loss) earnings per share excludes 787 thousand shares and 350 thousand shares, respectively, of nonvested restricted stock as the effect would have been anti-dilutive.

64

Table of Contents

Dividends — We have not declared or paid any cash dividends in the past. The terms of the Third ARLS Agreement restricts the payment or distribution of our cash or other assets, including cash dividend payments.
12.
Performance Awards

Awards, defined as cash, shares or other awards, may be granted to employees under the Amended and Restated Commercial Vehicle Group, Inc. 2014 Equity Incentive Plan (the “2014 EIP”). The cash award is earned and payable based upon the Company’s relative Total Shareholder Return in terms of ranking as compared to the Peer Group over a three-year period (the “Performance Period”). Total Shareholder Return is determined by the percentage change in value (positive or negative) over the applicable measurement period as measured by dividing (A) the sum of (I) the cumulative value of dividends and other distributions paid on the Common Stock (or the publicly traded common stock of the applicable Peer Group company) for the applicable measurement period, and (II) the difference (positive or negative) between each such company’s starting stock price and ending stock price, by (B) the starting stock price. The award is paid out at the end of the Performance Period in cash if the employee is employed through the end of the Performance Period. If the employee is not employed as of the payment date, the award is forfeited. These grants were accounted for as cash settlement awards for which the fair value of the award fluctuates based on the change in Total Shareholder Return in relation to the Peer Group. Performance awards were granted under the 2014 EIP in November 2017, 2016, and 2015. Expense associated with the performance awards is reported in selling, general and administrative expenses in the Consolidated Statements of Operations. The unrecognized expense is $2.0 million as of December 31, 2017. The following table summarizes the grant activity for the years December 31, 2017, 2016 and 2015:
Grant Date
 
Grant Amount
 
Adjustments
 
Forfeitures
 
Payments
 
Adjusted Award Value at December 31, 2017
 
Vesting Schedule
 
Remaining Periods (in Months) to Vesting
November 2014
 
$
2,087

 
(495
)
 
$
(1,097
)
 
$
(495
)
 
$

 
 November 2017
 
0
November 2015
 
1,487

 
646

 
(197
)
 
$

 
1,936

 
 November 2018
 
10
November 2016
 
1,434

 
(454
)
 
(37
)
 

 
943

 
November 2019
 
22
November 2017
 
1,584

 
(755
)
 

 

 
829

 
November 2020
 
34
 
 
$
6,592

 
$
(1,058
)
 
$
(1,331
)
 
$
(495
)
 
$
3,708

 
 
 
 
13.
Share-Based Compensation
The compensation expense for our share-based compensation arrangements (see Restricted Stock Awards below) was $2.5 million, $2.6 million and $2.9 million for the years ended December 31, 2017, 2016 and 2015, respectively. Share-based compensation expense is included in selling, general and administrative expenses in the Consolidated Statements of Operations.
Restricted Stock Awards - Restricted stock is a grant of shares of common stock that may not be sold, encumbered or disposed of and that may be forfeited in the event of certain terminations of employment or separation from the board of directors prior to the end of a restricted period set by the compensation committee of the board of directors. A participant granted restricted stock generally has all of the rights of a stockholder, unless the compensation committee determines otherwise. The following table summarizes information about unvested restricted stock grants (in thousands, except for share data):
Grant
 
Shares
 
Vesting Schedule
 
Unearned
Compensation
 
Remaining
Period (in
months)
October 2015
 
595,509

 
3 equal annual installments commencing on October 20, 2016
 
$
451.7

 
10
January/March 2016
 
62,610

 
3 equal annual installments commencing on October 20, 2016
 
$
22.5

 
10
October 2016
 
410,751

 
3 equal annual installments commencing on October 20, 2017
 
$
1,250.6

 
22
July 2017
 
5,701

 
3 equal annual installments commencing on July 13, 2017
 
$
28.5

 
22
October 2017
 
302,574

 
3 equal annual installments commencing on October 20, 2018
 
$
2,797.6

 
34
October 2017
 
45,965

 
Shares vesting as of October 20, 2018
 
$
375.0

 
10
As of December 31, 2017, there was approximately $4.9 million of unrecognized compensation expense related to non-vested share-based compensation arrangements granted under our equity incentive plans. This expense is subject to future adjustments and forfeitures and will be recognized on a straight-line basis over the remaining period listed above for each grant.
A summary of the status of our restricted stock awards as of December 31, 2017 and changes during the twelve-month period ending December 31, 2017, 2016 and 2015 is presented below:

65

Table of Contents

 
2017
 
2016
 
2015
 
Shares
(000’s)
 
Weighted-
Average
Grant-Date
Fair Value
 
Shares
(000’s)
 
Weighted-
Average
Grant-Date
Fair Value
 
Shares
(000’s)
 
Weighted-
Average
Grant-Date
Fair Value
Nonvested - beginning of year
981

 
$
4.70

 
1,128

 
$
4.24

 
915

 
$
6.96

Granted
354

 
$
9.77

 
571

 
$
5.05

 
818

 
$
3.24

Vested
(509
)
 
$
4.90

 
(558
)
 
$
4.68

 
(400
)
 
$
7.06

Forfeited
(39
)
 
$
4.84

 
(160
)
 
$
4.35

 
(205
)
 
$
6.93

Nonvested - end of year
787

 
$
6.84

 
981

 
$
4.70

 
1,128

 
$
4.24

As of December 31, 2017, a total of 2.6 million shares were available for future grants from the shares authorized for award under our 2014 Equity Incentive Plan, including cumulative forfeitures.
Repurchase of Common Stock - We did not repurchase any of our common stock on the open market as part of a stock repurchase program during 2017; however, our employees surrendered 161 thousand shares of our common stock to satisfy tax withholding obligations on the vesting of the restricted stock awards.
14.
Defined Contribution Plans, Pension and Other Post-Retirement Benefit Plans
Defined Contribution Plans - We sponsor various defined contribution plans covering all eligible employees. Eligible employees can contribute on a pre-tax basis to the plan. In accordance with the terms of the 401(k) plans, we elect to match a certain percentage of the participants’ contributions to the plans, as defined. We recognized expense associated with these plans of $3.0 million in 2017, $2.7 million in 2016 and $2.8 million in 2015.
Pension and Other Post-Retirement Benefit Plans - We sponsor pension and other post-retirement benefit plans that cover certain hourly and salaried employees in the U.S. and United Kingdom. Each of the plans are frozen to new participants. All of the plans, except for the Shadyside facility pension plan, are frozen to additional service credits earned. Our policy is to make annual contributions to the plans to fund the minimum contributions as required by local regulations.
The change in benefit obligation, plan assets and funded status as of December 31 consisted of the following:
 
U.S. Pension and Other Post-Retirement Benefit Plans
 
Non-U.S. Pension Plans
 
2017
 
2016
 
2017
 
2016
Change in benefit obligation:
 
 
 
 
 
 
 
Benefit obligation — Beginning of the year
$
47,512

 
$
47,795

 
$
40,820

 
$
39,186

Service cost
116

 
126

 

 

Interest cost
1,810

 
1,878

 
1,138

 
1,370

Participant contributions
8

 
7

 

 

Benefits paid
(2,188
)
 
(2,161
)
 
(1,309
)
 
(1,454
)
Actuarial loss (gain)
2,814

 
(133
)
 
1,099

 
9,234

Exchange rate changes

 

 
3,989

 
(7,516
)
Benefit obligation at end of the year
50,072

 
47,512

 
45,737

 
40,820

Change in plan assets:
 
 
 
 
 
 
 
Fair value of plan assets — Beginning of the year
38,390

 
36,270

 
31,080

 
33,608

Actual return on plan assets
6,584

 
2,035

 
1,798

 
4,214

Employer contributions
2,252

 
2,239

 
747

 
756

Participant contributions
8

 
7

 

 

Benefits paid
(2,188
)
 
(2,161
)
 
(1,309
)
 
(1,454
)
Exchange rate changes

 

 
3,061

 
(6,044
)
Fair value of plan assets at end of the year
45,046

 
38,390

 
35,377

 
31,080

Funded status
$
(5,026
)
 
$
(9,122
)
 
$
(10,360
)
 
$
(9,740
)
Amounts recognized in the Consolidated Balance Sheets at December 31 consisted of:

66

Table of Contents

 
U.S. Pension and Other Post-Retirement Benefit Plans
 
Non-U.S. Pension Plans
 
2017
 
2016
 
2017
 
2016
Current liabilities
$
52

 
$
64

 
$

 
$

Noncurrent liabilities
4,974

 
9,058

 
10,360

 
9,740

Amount recognized
$
5,026

 
$
9,122

 
$
10,360

 
$
9,740

The components of net periodic (benefit) cost for the years ended December 31 were as follows:
 
U.S. Pension and Other Post-Retirement Benefit Plans
 
Non-U.S. Pension Plans
 
2017
 
2016
 
2015
 
2017
 
2016
 
2015
Service cost
$
116

 
$
126

 
$
135

 
$

 
$

 
$

Interest cost
1,810

 
1,878

 
1,864

 
1,138

 
1,370

 
1,470

Expected return on plan assets
(2,684
)
 
(2,719
)
 
(2,673
)
 
(1,196
)
 
(1,520
)
 
(1,597
)
Amortization of prior service cost
6

 
6

 
6

 

 

 

Recognized actuarial loss (gain)
21

 
308

 
336

 
312

 
210

 
275

Net periodic (benefit) cost
$
(731
)
 
$
(401
)
 
$
(332
)
 
$
254

 
$
60

 
$
148


Amounts Recognized in Accumulated Other Comprehensive Income (Loss) - Amounts recognized in accumulated other comprehensive income (loss), before taking into account income tax effects, at December 31 are as follows:
 
U.S. Pension and Other Post-Retirement Benefit Plans
 
Non-U.S. Pension Plans
 
2017
 
2016
 
2015
 
2017
 
2016
 
2015
Net actuarial loss
$
13,765

 
$
15,219

 
$
14,974

 
$
13,454

 
$
14,134

 
$
8,784

Prior service cost
57

 
63

 
69

 

 

 

 
$
13,822

 
$
15,282

 
$
15,043

 
$
13,454

 
$
14,134

 
$
8,784

Other Changes in Plan Assets and Benefit Obligations Recognized in Other Comprehensive (Loss) Income — Amounts recognized as other changes in plan assets and benefit obligations in other comprehensive income (loss), before taking into account income tax effects, for the year ended December 31 are as follows:
 
U.S. Pension and Other Post-Retirement Plans
 
Non-U.S. Pension Plans
 
2017
 
2016
 
2017
 
2016
Actuarial loss (gain)
$
(1,087
)
 
$
551

 
$
519

 
$
6,001

Amortization of actuarial (gain) loss
(367
)
 
(308
)
 
(504
)
 
(193
)
Prior Service credit
(6
)
 
(6
)
 

 

Total recognized in other comprehensive income (loss)
$
(1,460
)
 
$
237

 
$
15

 
$
5,808

The estimated actuarial loss amortized into net periodic benefit cost over the next fiscal year is $0.3 million.
Weighted-average assumptions used to determine benefit obligations at December 31 were as follows:
 
U.S. Pension and Other Post-Retirement Benefit Plans
 
Non-U.S. Pension
Plans
 
2017
 
2016
 
2017
 
2016
Discount rate
3.42
%
 
3.87
%
 
2.45
%
 
2.70
%
Weighted-average assumptions used to determine net periodic benefit cost at December 31 were as follows:
 
U.S. Pension and Other Post-Retirement Plans
 
Non-U.S. Pension Plans
 
2017
 
2016
 
2015
 
2017
 
2016
 
2015
Discount rate
3.87
%
 
4.05
%
 
3.73
%
 
2.70
%
 
3.90
%
 
3.50
%
Expected return on plan assets
7.00
%
 
7.50
%
 
7.50
%
 
3.70
%
 
5.00
%
 
4.60
%

67

Table of Contents

The rate of return assumptions are based on projected long-term market returns for the various asset classes in which the plans are invested, weighted by the target asset allocations. An incremental amount for active plan asset management and diversification, where appropriate, is included in the rate of return assumption. Our pension plan investment strategy is reviewed annually.
We employ a total return investment approach whereby a mix of equities, fixed income and real estate investments are used to maximize the long-term return of plan assets taking into consideration a prudent level of risk. The intent of this strategy is to minimize plan expenses by outperforming plan liabilities over the long run. Risk tolerance is established through careful consideration of plan liabilities, plan funded status and corporate financial condition. The investment portfolio contains a diversified blend of equity, balanced, fixed income and real estate investments. Furthermore, equity investments are diversified across U.S. and non-U.S. stocks, as well as growth, value and large capitalizations. Other assets such as real estate are used judiciously to enhance long-term returns while improving portfolio diversification. Derivatives may be used to gain market exposure in an efficient and timely manner; however, derivatives may not be used to leverage the portfolio beyond the market value of the underlying investments. Investment risk is measured and monitored on an ongoing basis through annual liability measurements, periodic asset/liability studies and quarterly investment portfolio reviews. We expect to contribute approximately $3.0 million to our pension plans and our other post-retirement benefit plans in 2018.
Our current investment allocation target for our pension plans for 2017 and our weighted-average asset allocations of our pension assets for the years ended December 31, by asset category, are as follows:
 
Target Allocation
 
Actual Allocations as of December 31,
 
2017
 
2016
 
U.S. Pension Plans
 
Non-U.S. Pension Plans
 
U.S.
 
Non-U.S.
 
U.S.
 
Non-U.S.
 
2017
 
2016
 
2017
 
2016
Cash and cash equivalents
 
 
 
 
 
 
 
Equity/Balanced securities
55
 
55
 
55
 
55
 
57
 
52
 
58
 
55
Fixed income securities
25
 
45
 
25
 
45
 
20
 
23
 
42
 
45
Real estate
20
 
 
20
 
 
23
 
25
 
 
 
100%
 
100%
 
100%
 
100%
 
100%
 
100%
 
100%
 
100%
    
The following descriptions relate to our plan assets:
Equity Securities - Includes common stocks issued by U.S., United Kingdom and other international companies, equity funds that invest in common stocks and unit linked insurance policies. Equity investments generally allow near-term (within 90 days of the measurement date) liquidity and are held in issues that are actively traded to facilitate transactions at minimum cost.
Balanced Securities - Includes funds primarily invested in a mix of equity and fixed income securities where the allocations are at the discretion of the investment manager. Investments generally allow near-term (within 90 days of the measurement date) liquidity and are held in issues that are actively traded to facilitate transactions at minimum cost.
Fixed Income Securities - Includes U.S. dollar-denominated and United Kingdom and other international marketable bonds and convertible debt securities as well as fixed income funds that invest in these instruments. Investments generally allow near-term liquidity and are held in issues that are actively traded to facilitate transactions at minimum cost.
The fair value of fixed income securities is determined by either direct or indirect quoted market prices. When the value of assets held in separate accounts is not published, the value is based on the underlying holdings, which are primarily direct quoted market prices on regulated financial exchanges.
Real Estate - Real estate provides an indirect investment into a diversified and multi-sector portfolio of property assets. The fair value of real estate investments is valued by the fund managers. The fund managers value the real estate investments via independent third-party appraisals on a periodic basis. Assumptions used to revalue the properties are updated every quarter.
The fair values of our pension plan assets by asset category and by level as described in Note 2 for the years ended December 31, 2017 and 2016 are as follows:

68

Table of Contents

 
December 31, 2017
 
 
 
Quoted Prices in
Active Markets for
Identical Assets
 
Significant
Observable Inputs
 
Significant
Unobservable Inputs
 
Total
 
Level 1
 
Level 2
 
Level 3
Cash and cash equivalents
$
264

 
$
264

 
$

 
$

Equities:
 
 
 
 
 
 
 
U.S. large value
5,499

 
5,499

 

 

U.S. large growth
5,792

 
5,792

 

 

International blend
10,734

 

 
10,734

 

Emerging markets
3,613

 
3,613

 

 

Balanced
21,895

 

 
21,895

 

Fixed income securities:
 
 
 
 
 
 
 
Government bonds
9,806

 

 
9,806

 

Corporate bonds
12,667

 

 
12,667

 

Real Estate:

 
 
 
 
 
 
U.S. property
10,153

 

 

 
10,153

Total pension fund assets
$
80,423

 
$
15,168

 
$
55,102

 
$
10,153

 
 
 
 
 
 
 
 
 
December 31, 2016
 
 
 
Quoted Prices in
Active Markets for
Identical Assets
 
Significant
Observable Inputs
 
Significant
Unobservable Inputs
 
Total
 
Level 1
 
Level 2
 
Level 3
Cash and cash equivalents
$
174

 
$
174

 
$

 
$

Equities:
 
 
 
 
 
 
 
U.S. large value
4,800

 
4,800

 

 

U.S. large growth
4,805

 
4,805

 

 

International blend
7,954

 

 
7,954

 

Emerging markets
2,464

 
2,464

 

 

Balanced
18,486

 

 
18,486

 

Fixed income securities:
 
 
 
 
 
 
 
Government bonds
8,402

 

 
8,402

 

Corporate bonds
12,976

 

 
12,976

 

Real Estate:

 
 
 
 
 
 
U.S. property
9,409

 

 

 
9,409

Total pension fund assets
$
69,470

 
$
12,243

 
$
47,818

 
$
9,409


The fair value of our pension plan assets measured using significant unobservable inputs (Level 3) at December 31 are as follows:
 
2017
 
2016
Beginning balance
$
9,409

 
$
8,645

Actual return on assets held at reporting date
744

 
764

Ending balance
$
10,153

 
$
9,409


The following table summarizes our expected future benefit payments of our pension and other post-retirement benefit plans:

69

Table of Contents

Year Ending December 31,
Pension Plans
2018
$
4,065

2019
$
4,275

2020
$
4,461

2021
$
4,499

2022
$
4,467

2023 to 2026
$
23,547

15.
Accumulated Other Comprehensive Loss
The activity for each item of accumulated other comprehensive loss is as follows:
 
Foreign
currency items
 
Pension and
postretirement
benefits plans
 
Accumulated other
comprehensive
loss
Beginning balance, January 1, 2016
$
(21,079
)
 
$
(18,575
)
 
$
(39,654
)
Net current period change
(3,234
)
 
(6,347
)
 
(9,581
)
Reclassification adjustments for losses reclassified into income

 
390

 
390

Ending balance, December 31, 2016
$
(24,313
)
 
$
(24,532
)
 
$
(48,845
)
Net current period change
7,141

 
814

 
7,955

Reclassification adjustments for losses reclassified into income

 
(345
)
 
(345
)
Ending balance, December 31, 2017
$
(17,172
)
 
$
(24,063
)
 
$
(41,235
)
The related tax effects allocated to each component of other comprehensive income (loss) for the years ended December 31, 2017 and 2016 are as follows:
2017
Before Tax
Amount
 
Tax (Expense)
Benefit
 
After Tax Amount
Retirement benefits adjustment:
 
 
 
 
 
Net actuarial gain and prior service credit
$
1,072

 
$
(258
)
 
$
814

Reclassification of actuarial loss and prior service cost to net income
(257
)
 
(88
)
 
(345
)
Net unrealized gain
815

 
(346
)
 
469

Cumulative translation adjustment
7,141

 

 
7,141

Total other comprehensive income
$
7,956

 
$
(346
)
 
$
7,610

 
 
 
 
 
 
2016
Before Tax
Amount
 
Tax (Expense)
Benefit
 
After Tax Amount
Retirement benefits adjustment:
 
 
 
 
 
Net actuarial gain and prior service credit
$
(6,553
)
 
$
206

 
$
(6,347
)
Reclassification of actuarial loss and prior service cost to net income
507

 
(117
)
 
390

Net unrealized loss
(6,046
)
 
89

 
(5,957
)
Cumulative translation adjustment
(3,235
)
 
1

 
(3,234
)
Total other comprehensive loss
$
(9,281
)
 
$
90

 
$
(9,191
)
16.
Quarterly Financial Data (Unaudited)
The following is a condensed summary of quarterly results of operations for 2017 and 2016:

70

Table of Contents

 
Revenues
 
Gross Profit
 
Operating
Income
 
Net Income (Loss)
 
Basic and Diluted
Earnings (Loss)
Per Share
2017:
 
 
 
 
 
 
 
 
 
First
$
173,416

 
$
21,503

 
$
4,557

 
$
628

 
$
0.02

Second
$
195,127

 
$
22,701

 
$
7,568

 
$
131

 
$
0.00

Third
$
198,349

 
$
25,150

 
$
10,682

 
$
4,763

 
$
0.16

Fourth
$
188,339

 
$
23,211

 
$
8,638

 
$
(7,227
)
 
$
(0.24
)
2016:
 
 
 
 
 
 
 
 
 
First
$
180,291

 
$
25,704

 
$
8,580

 
$
2,563

 
$
0.09

Second
$
178,251

 
$
24,331

 
$
8,427

 
$
2,720

 
$
0.09

Third
$
153,604

 
$
18,919

 
$
4,466

 
$
1,147

 
$
0.04

Fourth
$
149,966

 
$
18,276

 
$
3,910

 
$
355

 
$
0.01

(1) 
See Note 11 for discussion on the computation of diluted shares outstanding.



71

Table of Contents

17.
Restructuring

Restructuring Activity

On November 19, 2015, the Board of Directors of the Company approved adjustments to the Company’s manufacturing footprint and manufacturing capacity utilization, and reductions to selling, general and administrative costs. We expected the costs associated with restructuring activities to total $11 million to $16 million, and capital investments to total $1.0 million to $2.0 million. The restructuring and cost reduction actions began in the fourth quarter of 2015 and were completed in the fourth quarter of 2017. Restructuring costs incurred during the years ended December 31, 20172016 and 2015 were $1.6 million and $3.5 million, and $0.8 million, respectively. Following is a summary of our key actions:

Edgewood Facility
The closure of our Edgewood, Iowa facility and transfer of production to our Agua Prieta, Mexico facility was announced on December 3, 2015 and was completed in 2016.
Piedmont Facility
On May 2, 2016, the Company announced plans to consolidate its North American seat production into two North American facilities and cease seat production in the Piedmont, Alabama facility. The Company continues to maintain a presence in Piedmont for our aftermarket distribution channel. This restructuring activity was completed in 2017.
Monona Facility
On July 19, 2016, the Company announced plans to transfer all wire harness production from its manufacturing facility in Monona, Iowa to its facility in Agua Prieta, Mexico. On May 24, 2017, the Company elected to maintain production capability in the Monona facility as a result of a shortage of labor in our North American wire harness business. 
Shadyside Facility
On July 21, 2016, the Company announced plans to close its Shadyside, Ohio facility that performs assembly and stamping activities. These activities were transferred to alternative facilities or sourced to local suppliers. This restructuring activity was substantially completed in 2017.
Restructuring Expenditures
The table below summarizes the expenditures incurred to date and future expenditures associated with the restructuring activities approved on November 19, 2015 (in millions):

72

Table of Contents

 
 
 
 
 
 
 
 
 
 
 
(in millions)
 
2015 Expense
 
2016 Expense
 
2017 (Income) Expense / Adjustment
 
Total Expense
 
Statement of Operations Classification
Edgewood Facility
 
 
 
 
 
 
 
 
 
 
Separation costs
 
$
0.1

 
$
0.2

 
$

 
$
0.3

 
 Cost of revenues
Facility and other costs
 

 
0.1

 

 
0.1

 
 Cost of revenues
Total
 
$
0.1

 
$
0.3

 
$

 
$
0.4

 
 
Piedmont Facility
 
 
 
 
 
 
 
 
 
 
Separation costs
 
$
0.1

 
$
0.5

 
$
(0.2
)
 
$
0.4

 
 Cost of revenues
Facility and other costs
 

 
0.4

 

 
0.4

 
 Cost of revenues
Total
 
$
0.1

 
$
0.9

 
$
(0.2
)
 
$
0.8

 
 
Monona Facility
 
 
 
 
 
 
 
 
 
 
Separation costs
 
$
0.2

 
$
0.3

 
$
(0.2
)
 
$
0.3

 
 Cost of revenues
Facility and other costs
 

 
0.1

 
1.3

 
1.4

 
 Cost of revenues
Total
 
$
0.2

 
$
0.4

 
$
1.1

 
$
1.7

 
 
Shadyside Facility
 
 
 
 
 
 
 
 
 
 
Separation costs
 
$
0.2

 
$
1.5

 
$
0.5

 
$
2.2

 
 Cost of revenues
Facility and other costs
 

 
0.2

 
0.2

 
0.4

 
 Cost of revenues
Total
 
$
0.2

 
$
1.7

 
$
0.7

 
$
2.6

 
 
Other Restructuring
 
 
 
 
 
 
 
 
 
 
Separation costs
 
$

 
$
0.1

 
$

 
$
0.1

 
 Cost of revenues
Separation costs
 
0.2

 
0.1

 

 
0.3

 
 Selling, general and administrative
Total
 
$
0.2

 
$
0.2

 
$

 
$
0.4

 
 
Total Restructuring
 
$
0.8

 
$
3.5

 
$
1.6

 
$
5.9

 
 
A summary of the restructuring liability for the years ended December 31 is as follows:
 
2017
 
Employee Costs
 
Facility Exit and Other Contractual Costs
 
Total
Balance - Beginning of the year
$
2,229

 
$
45

 
$
2,274

Provisions
196

 
1,402

 
1,598

Utilizations
(2,382
)
 
(1,447
)
 
(3,829
)
Balance - End of the year
$
43

 
$

 
$
43

 
 
 
 
 
 
 
2016
 
Employee Costs
 
Facility Exit and Other Contractual Costs
 
Total
Balance - Beginning of the year
$
542

 
$
43

 
$
585

Provisions
2,668

 
839

 
3,507

Utilizations
(981
)
 
(837
)
 
(1,818
)
Balance - End of the year
$
2,229

 
$
45

 
$
2,274

Item 9.
Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
There were no disagreements with our independent accountants on matters of accounting and financial disclosures or reportable events.

Item 9A.
Controls and Procedures

73

Table of Contents

We maintain disclosure controls and procedures that are designed to provide reasonable assurance that information required to be disclosed in our Exchange Act reports is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to our management, including our President and Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure. Management necessarily applied its judgment in assessing the costs and benefits of such controls and procedures, which, by their nature, can provide only reasonable assurance regarding management’s disclosure control objectives.
Evaluation of Disclosure Controls and Procedures
We evaluated, with the participation of our principal executive officer and principal financial officer, the effectiveness of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”)) as of December 31, 2017. Based on this evaluation, our principal executive officer and principal financial officer have concluded that our disclosure controls and procedures were effective as of December 31, 2017 to provide reasonable assurance that information required to be disclosed in our reports under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC rules and forms and that such information is accumulated and communicated to management as appropriate to allow timely decisions regarding required disclosure.
Management’s Report on Internal Control Over Financial Reporting
Management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rule 13a-15(f) under the Exchange Act. Our internal control system is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, controls deemed effective now may become inadequate in the future because of changes in conditions, or because compliance with the policies or procedures has deteriorated or been circumvented. Management assessed the effectiveness of our internal control over financial reporting as of December 31, 2017. In making this assessment, management used the criteria established in the Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) (the “COSO criteria”). Based on management’s assessment and the COSO criteria, management believes that our internal control over financial reporting was effective as of December 31, 2017.
Our independent registered public accounting firm, KPMG LLP, has issued a report on our internal control over financial reporting. KPMG LLP’s report appears following Item 9A and expresses an unqualified opinion on the effectiveness of our internal control over financial reporting.
Changes in Internal Control Over Financial Reporting
There were no changes in our internal control over financial reporting during the year ended December 31, 2017 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

74

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Stockholders and Board of Directors
Commercial Vehicle Group, Inc.:

Opinion on Internal Control Over Financial Reporting
We have audited Commercial Vehicle Group, Inc. and subsidiaries’ (the Company) internal control over financial reporting as of December 31, 2017, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2017, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated balance sheets of the Company as of December 31, 2017 and 2016, the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for each of the years in the three-year period ended December 31, 2017, and the related notes and financial statement schedule II: Valuation of Qualifying Accounts (collectively, the consolidated financial statements), and our report dated March 12, 2018 expressed an unqualified opinion on those consolidated financial statements.
Basis for Opinion
The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
Definition and Limitations of Internal Control Over Financial Reporting
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ KPMG LLP
Columbus, Ohio
March 12, 2018


75

Table of Contents

Item 9B.
Other Information
None.
PART III
Item 10.
Directors, Executive Officers and Corporate Governance

A.
Directors of the Registrant
The following table sets forth certain information with respect to our current directors as of March 12, 2018:
 
Name
 
Age

 
Principal Position(s)
Richard A. Snell
 
75

 
Chairman and Director
Patrick E. Miller
 
50

 
President, Chief Executive Officer and Director
Scott C. Arves
 
60

 
Director
Harold Bevis
 
58

 
Director
Wayne Rancourt
 
55

 
Director
Roger Fix
 
63

 
Director
Robert C. Griffin
 
70

 
Director
The following biographies describe the business experience of our directors:
Scott C. Arves has served as a Director since July 2005. From January 2007 to June 2015, Mr. Arves served as President and Chief Executive Officer of Transport America, a truckload, intermodal and logistics provider. Prior to joining Transport America, Mr. Arves was President of Transportation for Schneider National, Inc., a provider of transportation, logistics and related services, from May 2000 to July 2006. Mr. Arves brings over 30 years of transportation experience to his role as Director, including 19 years of P&L experience and 16 years as a Division President or Chief Executive Officer.  Mr. Arves also serves on the board of TFI International, a North American leader in the transportation and logistics industry.
Harold Bevis has served as a Director since June 2014. He has 25 years of business leadership experience, including 15 years as a CEO. He was a business leader at both GE and Emerson Electric. He has led or directed 8 businesses in 6 industries, 148 plants in 22 countries, 12 new business/new plant startups, 11 acquisitions, and 24 business/plant expansions. Mr. Bevis is currently President of OmniMax International, a portfolio of building products businesses, since October 2017. Mr. Bevis earned a BS degree in industrial engineering from Iowa State University and an MBA degree from Columbia Business School. He is a member of the National Association of Corporate Directors and has served on 5 Boards of Directors.

Roger L. Fix has served as a Director since June 2014. He served as a member of the board of directors of Standex International Corporation from 2001 until 2017, when he retired from the Standex board. He served as Non-Executive Chairman from 2014 - 2016, and President and Chief Executive Officer of Standex from 2003 to 2014. He was Standex’s President and Chief Operating Officer from 2001 to 2003. Prior to joining Standex, Mr. Fix held a number of general management positions at Emerson Electric, the TI Group, plc and TRW over a period of more than 20 years. Mr. Fix has served as a Director of Flowserve Corporation since 2006 and as Chairman of the Corporate Nominating and Governance Committee and a member of the Audit Committee. Mr. Fix currently serves as the Chairman of the Board of Flowserve Corporation. Mr. Fix earned a master’s degree in mechanical engineering from the University of Texas and a bachelor-of-science degree in mechanical engineering from the University of Nebraska.
Robert C. Griffin has served as a Director since July 2005. His career spanned over 25 years in the financial sector, including Head of Investment Banking Americas and Management Committee Member for Barclay’s Capital from 2000 to 2002. Prior to that, Mr. Griffin served as the Global Head of Financial Sponsor Coverage for Bank of America Securities and a member of its Montgomery Securities Subsidiary Management Committee from 1998 to 2000 and as Group Executive Vice President of Bank of America and a member of its Senior Management Committee from 1997 to 1998. Mr. Griffin served as a Director of GSE Holdings, Inc., from December 2011 to August 2014 where he was Chairman of the Board and a member of the Compensation Committee and the Nominating and Corporate Governance Committee. Mr. Griffin served as a Director of The J.G. Wentworth Company where he was Chairman of the Audit Committee from October 2013 to January 2018. Mr. Griffin serves as a Director of Builders FirstSource, Inc., where he is Chairman of the Audit Committee, a member of the Compensation Committee and the Nominating Committee and was Chairman of their Special Committee in 2009 and 2015. Mr. Griffin brings strong financial and management expertise to our Board through his experience as an officer and director of a public company, service on other boards and his senior leadership tenure within the financial industry.

76

Table of Contents

Patrick E. Miller has served as President and Chief Executive Officer and a Director since November 2015. Mr. Miller, who most recently was President of the Company’s Global Truck & Bus Segment, has been with the Company since 2005. During this time, he served in the capacity of Senior Vice President & General Manager of Aftermarket; Senior Vice President of Global Purchasing; Vice President of Global Sales; Vice President & General Manager of North American Truck and Vice President & General Manager of Structures. Prior to joining the Company, Mr. Miller held engineering, sales, and operational leadership positions with Hayes Lemmerz International, Alcoa, Inc. and ArvinMeritor. He holds a Bachelor of Science in Industrial Engineering from Purdue University and a Masters of Business Administration from the Harvard University Graduate School of Business.
Wayne Rancourt has served as a Director since July 2016. Mr. Rancourt has served as Executive Vice President, Chief Financial Officer & Treasurer of Boise Cascade Company since August 2009, a $4.4 billion in revenues North American based manufacturing and distribution company. Mr. Rancourt has over 30 years of experience in various finance roles including chief financial officer, treasurer, investor relations, strategic planning, as well as internal audit. Mr. Rancourt received a bachelor of science degree in Accounting from Central Washington University. Mr. Rancourt brings strong financial expertise to the Board through his experience in various finance roles.
Richard A. Snell has served as a Director since August 2004 and as Chairman since March 2010. He served as Chairman and Chief Executive Officer of Qualitor, Inc. from May 2005 until April 2015 and as an Operating Partner at HCI Partners from 2003 to December 2015. Mr. Snell served as Chairman and Chief Executive Officer of Federal-Mogul Corporation, an automotive parts manufacturer, where he served from 1996 to 2000, and as Chief Executive Officer at Tenneco Automotive, also an automotive parts manufacturer, where he was employed from 1987 to 1996. Mr. Snell served as a Director of Schneider National, Inc., a multi-national trucking company, and as a member of their Compensation and Governance Committees from 1996 to 2011.
B.
Executive Officers
Information regarding our executive officers is set forth in Item 1 of Part I of this Annual Report on Form 10-K under the heading “Executive Officers of the Registrant.”
There are no family relationships between any of our directors or executive officers.
C.
Section 16(a) Beneficial Ownership Reporting Compliance and Corporate Governance
The information required by Item 10 with respect to compliance with reporting requirements is incorporated herein by reference to the sections labeled “Section 16(a) Beneficial Ownership Reporting Compliance” and “Proposal No. 1 - Election of Directors - Corporate Governance,” which appear in CVG’s 2018 Proxy Statement.
Item 11.
Executive Compensation
The information required by Item 11 is incorporated herein by reference to the sections labeled “Executive Compensation - 2017 Director Compensation Table” and “Executive Compensation” and “Proposal No. 1 - Election of Directors - Corporate Governance,” which appear in CVG’s 2018 Proxy Statement, including information under the heading “Compensation Discussion and Analysis.”
Item 12.
Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
Options to purchase common shares of our common stock were granted to certain of our executives and key employees under our 2014 Equity Incentive Plan. There are no outstanding options, warrants or rights associated with the Company's Equity Incentive Plans. The following table summarizes the number of securities remaining to be issued under the outstanding equity compensation plan as of December 31, 2017:
 
 
Number of Securities to be
Issued upon Exercise of
Outstanding Options,
Warrants and Rights
 
Weighted-average
Exercise Price of
Outstanding
Options, Warrants
and Rights
 
Number of
Securities
Remaining Available
for Future Issuance
Under Equity
Compensation Plans
2014 Equity Incentive Plan approved by security holders

 
$

 
2,553,463

The information required by Item 12 is incorporated herein by reference to the section labeled “Security Ownership of Certain Beneficial Owners and Management,” which appears in CVG’s 2018 Proxy Statement.
Item 13
Certain Relationships, Related Transactions and Director Independence
The information required by Item 13 is incorporated herein by reference to the sections labeled “Certain Relationships and Related Transactions” and “Proposal No. 1 - Election of Directors - Corporate Governance,” which appear in CVG’s 2018 Proxy Statement.

77

Table of Contents

Item 14.
Principal Accountant Fees and Services
The information required by Item 14 is incorporated herein by reference to the section labeled “Proposal No. 3 - Ratification of Appointment of the Independent Registered Public Accounting Firm,” which appears in CVG’s 2018 Proxy Statement.
 

78

Table of Contents

PART IV
Item 15.
Exhibits, Financial Statements Schedules
(1)LIST OF FINANCIAL STATEMENT SCHEDULES
The following financial statement schedule of the Corporation and its subsidiaries is included herein:
Schedule II - Valuation and Qualifying Accounts and Reserves.
COMMERCIAL VEHICLE GROUP, INC. AND SUBSIDIARIES
SCHEDULE II: VALUATION AND QUALIFYING ACCOUNTS
December 31, 2017, 2016 and 2015
Accounts Receivable Allowances:
Activity for the years ended December 31 is as follows (in thousands):
 
 
2017
 
2016
 
2015
Balance - Beginning of the year
$
3,881

 
$
4,539

 
$
2,808

Provisions
5,488

 
5,547

 
4,640

Utilizations
(4,264
)
 
(6,063
)
 
(2,828
)
Currency translation adjustment
137

 
(142
)
 
(81
)
Balance - End of the year
$
5,242

 
$
3,881

 
$
4,539

Income Tax Valuation Allowance:
Activity for the years ended December 31 is as follows (in thousands):
 
2017
 
2016
 
2015
Balance - Beginning of the year
12,546

 
$
14,404

 
$
11,770

Provisions
2,506

 
2,917

 
3,436

Utilizations
(31
)
 
(4,775
)
 
(802
)
Balance - End of the year
15,021

 
$
12,546

 
$
14,404

All other schedules for which provision is made in the applicable accounting regulations of the SEC are not required under the related instructions or are inapplicable and, therefore, have been omitted.
(2)
LIST OF EXHIBITS
The following exhibits are either included in this report or incorporated herein by reference as indicated below:




















79

Table of Contents

EXHIBIT INDEX

Exhibit No.
  
Description
 
 
 
  
Asset Purchase Agreement, dated as of January 28, 2011, by and among CVG Alabama LLC and Bostrom Seating, Inc., (incorporated by reference to the Company’s annual report on Form 10-K (File No. 000-34365), filed on March 15, 2011).
 
 
 
  
Amended and Restated Certificate of Incorporation of the Company (incorporated by reference to the Company’s quarterly report on Form 10-Q (File No. 000-50890), filed on September 17, 2004).
 
 
 
  
Certificate of Amendment to the Amended and Restated Certificate of Incorporation of the Company, dated as of May 12, 2011 (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on May 13, 2011).
 
 
 
  
Certificate of Amendment to the Amended and Restated Certificate of Incorporation of the Company, dated as of May 15, 2015 (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on May 15, 2015).
 
 
 
 
Amended and Restated By-laws of the Company (incorporated by reference to the Company’s quarterly report on Form 10-Q (File No. 000-50890), filed on September 17, 2004).
 
 
 
  
Certificate of Designations of Series A Preferred Stock (included as Exhibit A to the Rights Agreement incorporated by reference to Exhibit 4.8) (incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on May 22, 2009.
 
 
 
  
Registration Rights Agreement, dated July 6, 2005, among the Company, the subsidiary guarantors party thereto and the purchasers named therein (incorporated herein by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on July 8, 2005).
 
 
 

Commercial Vehicle Group, Inc. Rights Agreement, dated as of May 21, 2009, by and between the Company and Computershare Trust Company, N.A. (incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on May 22, 2009).
 
 
 
  
Form of Rights Certificate (included as Exhibit B to the Rights Agreement) (incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on May 22, 2009).
 
 
 
  
Form of Summary of Rights to Purchase (included as Exhibit C to the Rights Agreement) (incorporated by reference to the Company’s current report on Form 8-K (File No. 000-50890), filed on May 22, 2009).
 
 
 
  
Commercial Vehicle Group, Inc. Amendment No. 1 to Rights Agreement, dated as of March 9, 2011, by and between the Company and Computershare Trust Company, N.A. (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on March 9, 2011).
 
 
 
  
Form of Certificate of Common Stock of the Company (incorporated by reference to the Company’s registration statement on Form S-1/A (File No. 333-115708), filed August 3, 2004).
 
 
 
  
Amended and Restated Loan and Security Agreement, dated as of April 26, 2011, by and among the Company, certain of the Company’s subsidiaries, as borrowers, and Bank of America, N.A. as agent and lender (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on April 28, 2011.
 
 
 
  
Second Amended and Restated Loan and Security Agreement, dated as of November 15, 2013, by and among the Company, certain of the Company’s subsidiaries, as borrowers, and Bank of America, N.A. as agent and lender, (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on November 21, 2013).
 
 
 
  
Third Amended and Restated Loan and Security Agreement, dated as of April 12, 2017, by and among the Company, certain of the Company’s subsidiaries, as borrowers, and Bank of America, N.A. as agent and other lender parties thereto (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on April 13, 2017).
 
 
 
  
Term Loan Agreement, dated as of April 12, 2017, by and among the Company, Bank of America, N.A., as administrative agent, and other lender parties thereto (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on April 13, 2017).

80

Table of Contents

Exhibit No.
  
Description
 
 
 
  
Commercial Vehicle Group, Inc. Fourth Amended and Restated Equity Incentive Plan (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on May 13, 2011).
 
 
 
  
Commercial Vehicle Group, Inc. 2014 Equity Incentive Plan (incorporated by reference from the Company proxy statement on Form Schedule 14A (File No. 001-34365), filed on April 11, 2014).
 
 
 
  
Amended and Restated Commercial Vehicle Group, Inc. 2014 Equity Incentive Plan (incorporated by reference from the Company current report on Form 8-K (File No. 001-34365), filed on May 17, 2017).
 
 
 
  
Commercial Vehicle Group, Inc. 2017 Annual Incentive Plan (incorporated by reference from the Company current report on Form 10-Q (File No. 001-34365), filed on May 5, 2017).
 
 
 
  
Registration Agreement, dated October 5, 2000, by and among Bostrom Holding, Inc. and the investors listed on Schedule A attached thereto (incorporated by reference to the Company’s registration statement on Form S-1 (File No. 333-115708), filed on May 21, 2004).
 
 
 
  
Joinder to the Registration Agreement, dated as of May 20, 2004, by and among Commercial Vehicle Group, Inc. and the prior stockholders of Trim Systems (incorporated by reference to the Company’s quarterly report on Form 10-Q (File No. 000-50890), filed on September 17, 2004).
 
 
 
  
Assignment and Assumption Agreement, dated as of June 1, 2004, between Mayflower Vehicle Systems PLC and Mayflower Vehicle Systems, Inc. (incorporated by reference to the Company’s registration statement on Form S-1 (File No. 333-125626), filed on June 8, 2005).
 
 
 
  
Form of Cash Performance Award pursuant to the Commercial Vehicle Group, Inc. Fourth Amended and Restated Equity Incentive Plan (incorporated by reference to the Company’s Annual Report on Form 10-K (File No. 001-34365), filed on March 11, 2013).
 
 
 
  
Form of Restricted Stock Agreement pursuant to the Commercial Vehicle Group, Inc. 2014 Equity Incentive Plan (incorporated by reference from the Company quarterly report on Form 10-Q (File No. 001-34365), filed on November 7, 2014).
 
 
 
  
Offer letter, dated September 27, 2013, to C. Timothy Trenary (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on September 30, 2013).
 
 
 
  
Change in Control & Non-Competition Agreement dated January 23, 2014 with C. Timothy Trenary (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on January 24, 2014).
 
 

  
Amended and Restated Deferred Compensation Plan dated November 5, 2008 (incorporated by reference to the Company’s annual report on Form 10-K (File No. 000-50890), filed on March 16, 2009).
 
 

  
Form of indemnification agreement with directors and executive officers (incorporated by reference to the Company’s annual report on Form 10-K (File No. 000-50890), filed on March 14, 2008).
 
 

  
Change in Control & Non-Competition Agreement dated October 24, 2014 with Patrick Miller (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on October 28, 2014).
 
 

  
Employment Agreement, dated as of March 22, 2016, between the Company and Patrick E. Miller (incorporated by reference to the company’s current report on form 8-K (File No. 001-34365), filed on March 24, 2016).
 
 
 
  
Change in Control & Non-Competition Agreement dated October 24, 2014 with Stacie Fleming (incorporated by reference to the Company’s current report on Form 8-K (File No. 001-34365), filed on October 28, 2014).
 
 
 
  
Change in Control & Non-Competition Agreement dated February 1, 2016 with Greg Boese.
 
 
 
  
Change in Control & Non-Competition Agreement dated February 1, 2016 with Dale McKillop.
 
 
 
  
Retention Bonus Agreement between the Company and Mr. Trenary effective March 22, 2016 (incorporated by reference to the Company’s quarterly report on Form 10-Q (File No. 001-34365), filed on August 3, 2016).
 
 
 
  
Contract for Purchase and Sale of Real Property between Mayflower Vehicle Systems, LLC and Warren Distribution, Inc. dated July 24, 2017 (incorporated by reference from the Company quarterly report on Form 10-Q (File No. 001-34365), filed on November 7, 2017).
 
 
 

81

Table of Contents

Exhibit No.
  
Description
  
Computation of ratio of earnings to fixed charges.
 
 
 
  
Subsidiaries of Commercial Vehicle Group, Inc.
 
 
 
  
Consent of KPMG LLP.
 
 
 
  
302 Certification by Patrick E. Miller, President and Chief Executive Officer.
 
 
 
  
302 Certification by C. Timothy Trenary, Executive Vice President and Chief Financial Officer.
 
 
 
  
906 Certification by Patrick E. Miller pursuant to 18 U.S.C. Section 1350, as adopted pursuant to the Sarbanes-Oxley Act of 2002.
 
 
 
  
906 Certification by C. Timothy Trenary pursuant to 18 U.S.C. Section 1350, as adopted pursuant to the Sarbanes-Oxley Act of 2002.
 
 
 
101.INS
  
XBRL Instance Document
 
 
 
101.SCH
  
XBRL Schema Document
 
 
 
101.CAL
  
XBRL Calculation Linkbase Document
 
 
 
101.LAB
  
XBRL Label Linkbase Document
 
 
 
101.PRE
  
XBRL Presentation Linkbase Document
 
 
 
101.DEF
  
XBRL Definition Linkbase Document
 
*
Management contract or compensatory plan or arrangement required to be filed as an exhibit to this annual report on Form 10-K.
**
The schedules and exhibits to the Asset Purchase Agreement have been omitted from this filing pursuant to Item 601(b)(2) of Regulation S—K. The Company will furnish supplementally a copy of any such omitted schedules or exhibits to the SEC upon request.
All other items included in an Annual Report on Form 10-K are omitted because they are not applicable or the answers thereto are none.


82

Table of Contents

SIGNATURES
Pursuant to the requirements of Section 13 of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
 
 
COMMERCIAL VEHICLE GROUP, INC.
 
 
By:
/s/ Patrick E. Miller
 
Patrick E. Miller
 
President and Chief Executive Officer
Date: March 12, 2018
Pursuant to the requirements of the Securities Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities indicated on March 12, 2018.
 
 
 
 
Signature
  
Title
 
 
/s/ Richard A. Snell
  
Chairman and Director
Richard A. Snell
 
 
 
 
/s/ Patrick E. Miller
  
President, Chief Executive Officer
Patrick E. Miller
 
(Principal Executive Officer) and Director
 
 
 
/s/ Scott C. Arves
  
Director
Scott C. Arves
 
 
 
 
/s/ Harold Bevis
  
Director
Harold Bevis
 
 
 
 
/s/ Wayne Rancourt
  
Director
Wayne Rancourt
 
 
 
 
/s/ Roger Fix
  
Director
Roger Fix
 
 
 
 
/s/ Robert C. Griffin
  
Director
Robert C. Griffin
 
 
 
 
/s/ C. Timothy Trenary
  
Chief Financial Officer
C. Timothy Trenary
 
(Principal Financial Officer)
 
 
 
/s/ Stacie N. Fleming
  
Chief Accounting Officer
Stacie N. Fleming
 
(Principal Accounting Officer)


83