COMPX INTERNATIONAL INC - Annual Report: 2021 (Form 10-K)

​

​

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE

SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2021

OR

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF

THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ___ to ____

Commission file number 1-13905

COMPX INTERNATIONAL INC.

(Exact name of Registrant as specified in its charter)

​

​

Securities registered pursuant to Section 12(b) of the Act:

​

​

No securities registered pursuant to Section 12(g) of the Act.

Indicate by check mark:

If the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes  ☐    No  ☒

If the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes  ☐    No  ☒

Whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months and (2) has been subject to such filing requirements for the past 90 days.  Yes  ☒    No   ☐

Whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registration was required to submit such files).  Yes  ☒    No   ☐

Whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer”, “smaller reporting company”, and “emerging growth company” in Rule 12b-2 of the Exchange Act.

​

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

Whether the Registrant is a shell Company (as defined in Rule 12b-2 of the Exchange Act).  Yes  ☐    No  ☒

The aggregate market value of the 1.6 million shares of voting stock held by nonaffiliates of CompX International Inc. as of June 30, 2021 (the last business day of the Registrant’s most recently completed second fiscal quarter) approximated $34.1 million.

As of February 22, 2022, registrant had 12,380,657 shares of Class A common stock, $.01 par value per share, outstanding.

Documents incorporated by reference

The information required by Part III is incorporated by reference from the Registrant’s definitive proxy statement to be filed with the Commission pursuant to Regulation 14A not later than 120 days after the end of the fiscal year covered by this report.

​

​

​

​

​

PART I

ITEM 1.BUSINESS

General

CompX International Inc. (NYSE American: CIX), incorporated in Delaware in 1993, is a leading manufacturer of security products used in the recreational transportation, postal, office and institutional furniture, cabinetry, tool storage, healthcare and a variety of other industries. We are also a leading manufacturer of stainless steel exhaust systems, gauges, throttle controls, wake enhancement systems and trim tabs for the recreational marine industry. Our products are principally designed for use in medium to high-end product applications where design, quality and durability are valued by our customers.

At December 31, 2021, NL Industries, Inc. (NYSE: NL) owns approximately 87% of our outstanding common stock, Valhi, Inc. (NYSE: VHI) owns approximately 83% of NL’s outstanding common stock and a subsidiary of Contran Corporation owns approximately 92% of Valhi’s outstanding common stock. As discussed in Note 1 to our Consolidated Financial Statements, a majority of Contran’s outstanding voting stock is held directly by Lisa K. Simmons and various family trusts established for the benefit of Ms. Simmons, Thomas C. Connelly (the husband of Ms. Simmons’ late sister) and their children and for which Ms. Simmons or Mr. Connelly, as applicable, serve as trustee (collectively, the “Other Trusts”). With respect to the Other Trusts for which Mr. Connelly serves as trustee, he is required to vote the shares of Contran voting stock held in such trusts in the same manner as Ms. Simmons. Such voting rights of Ms. Simmons last through April 22, 2030 and are personal to Ms. Simmons. The remainder of Contran’s outstanding voting stock is held by another trust (the “Family Trust”), which was established for the benefit of Ms. Simmons and her late sister and their children and for which a third-party financial institution serves as trustee. Consequently, at December 31, 2021, Ms. Simmons and the Family Trust may be deemed to control Contran, and therefore may be deemed to indirectly control the wholly-owned subsidiary of Contran, Valhi, NL and us.

Our corporate offices are located at Three Lincoln Centre, 5430 LBJ Freeway, Suite 1700, Dallas, Texas 75240. Our telephone number is (972) 448-1400. We maintain a website at www.compxinternational.com.

Unless otherwise indicated, references in this report to “we,” “us,” or “our” refer to CompX International Inc. and its subsidiaries taken as a whole.

Forward-Looking Statements

This Annual Report on Form 10-K contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995, as amended. Statements in this Annual Report that are not historical facts are forward-looking in nature and represent management’s beliefs and assumptions based on currently available information. In some cases, you can identify forward-looking statements by the use of words such as “believes,” “intends,” “may,” “should,” “could,” “anticipates,” “expects” or comparable terminology, or by discussions of strategies or trends. Although we believe that the expectations reflected in such forward-looking statements are reasonable, we do not know if these expectations will be correct. Such statements by their nature involve substantial risks and uncertainties that could significantly impact expected results. Actual future results could differ materially from those predicted. The factors that could cause actual future results to differ materially from those described herein are the risks and uncertainties discussed in this Annual Report and those described from time to time in our other filings with the U.S. Securities and Exchange Commission (the “SEC”) and include, but are not limited to, the following:

​

Should one or more of these risks materialize or if the consequences worsen, or if the underlying assumptions prove incorrect, actual results could differ materially from those currently forecasted or expected. We disclaim any intention or obligation to update or revise any forward-looking statement whether as a result of changes in information, future events or otherwise.

Industry Overview

We manufacture engineered components utilized in a variety of applications and industries. We manufacture mechanical and electrical cabinet locks and other locking mechanisms used in recreational transportation, postal, office and institutional furniture, cabinetry, tool storage and healthcare applications. We also manufacture stainless steel exhaust systems, gauges, throttle controls, wake enhancement systems, trim tabs and related hardware and accessories for the recreational marine and other industries. We continuously seek to diversify into new markets and identify new applications and features for our products, which we believe provide a greater potential for higher rates of earnings growth as well as diversification of risk. See also Item 7 – “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

Business Segments

We have two operating business segments – Security Products and Marine Components. For additional information regarding our segments, see “Part II – Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations” and Note 2 to the Consolidated Financial Statements.

Manufacturing, Operations and Products

Security Products. Our Security Products segment manufactures mechanical and electrical cabinet locks and other locking mechanisms used in a variety of applications including ignition systems, mailboxes, file cabinets, desk drawers, tool storage cabinets, high security medical cabinetry, integrated inventory and access control secured narcotics boxes, electronic circuit panels, storage compartments, gas station security, vending and cash containment machines. Our Security Products segment has one manufacturing facility in Mauldin, South Carolina and one in Grayslake, Illinois which is shared with Marine Components. We believe we are a North American market leader in the manufacture and sale of cabinet locks and other locking mechanisms. These products include:

​

A substantial portion of our Security Products’ sales consist of products with specialized adaptations to an individual customer’s specifications, some of which are listed above. We also have a standardized product line suitable for many customers, which is offered through a North American distribution network to locksmith and smaller original equipment manufacturer distributors via our STOCK LOCKS^® distribution program.

Marine Components. Our Marine Components segment manufactures and distributes stainless steel exhaust components, gauges, throttle controls, wake enhancement systems, trim tabs and related hardware and accessories primarily for performance and ski/wakeboard boats. Our Marine Components segment has a facility in Neenah, Wisconsin and a facility in Grayslake, Illinois which is shared with Security Products. Our specialty Marine Component products are high precision components designed to operate within tight tolerances in the highly demanding marine environment. These products include:

For information regarding our three principal manufacturing facilities, see “Item 2 – Properties.”

Raw Materials

Our primary raw materials are:

These raw materials are purchased from several suppliers, are readily available from numerous sources and accounted for approximately 16% of our total cost of sales for 2021. Total material costs, including purchased components, represented approximately 44% of our cost of sales in 2021.

We occasionally enter into short-term commodity-related raw material supply arrangements to mitigate the impact of future price increases in commodity-related raw materials, including zinc, brass and stainless steel. These arrangements generally provide for stated unit prices based upon specified purchase volumes, which help us to stabilize our commodity-related raw material costs to a certain extent. At other times we may make spot market buys of larger quantities of raw materials to take advantage of favorable pricing or volume-based discounts. Prices for the primary commodity-related raw materials used in the manufacture of our locking mechanisms, primarily zinc and brass, remained relatively stable during 2020 but generally increased throughout 2021. The prices for stainless steel, the primary raw material used for the manufacture of marine exhaust headers and pipes and wake enhancement systems, remained relatively stable in 2020 but experienced significant volatility during 2021. Based on current economic conditions, we expect the prices for zinc, brass and stainless steel, and other manufacturing materials to be volatile during 2022. When purchased on the spot market, each of these raw materials may be subject to sudden and unanticipated price increases. When possible,

​

we seek to mitigate the impact of fluctuations in these raw material costs on our margins through improvements in production efficiencies or other operating cost reductions. In the event we are unable to offset raw material cost increases with other cost reductions, it may be difficult to recover those cost increases through increased product selling prices or raw material surcharges due to the competitive nature of the markets served by our products. Consequently, overall operating margins can be affected by commodity-related raw material cost pressures. Commodity market prices are cyclical, reflecting overall economic trends, specific developments in consuming industries and speculative investor activities.

Patents and Trademarks

We hold a number of patents relating to our component products, certain of which we believe to be important to us and our continuing business activity. Patents generally have a term of 20 years, and our patents have remaining terms ranging from 1 year to 18 years at December 31, 2021.

Our major trademarks and brand names in addition to CompX^® include:

​

Sales, Marketing and Distribution

A majority of our component sales are direct to large OEM customers through our factory-based sales and marketing professionals supported by engineers working in concert with field salespeople and independent manufacturer’s representatives. We select manufacturer’s representatives based on special skills in certain markets or relationships with current or potential customers.

In addition to sales to large OEM customers, a substantial portion of our Security Products sales are made through distributors. We have a significant North American market share of cabinet lock security product sales as a result of the locksmith distribution channel. We support our locksmith distributor sales with a line of standardized products used by the largest segments of the marketplace. These products are packaged and merchandised for easy availability and handling by distributors and end users.

We sell to a diverse customer base with only one customer representing 10% or more of our sales in 2021 (United States Postal Service representing 16%). Our largest ten customers accounted for approximately 51% of our sales in 2021.

Competition

The markets in which we participate are highly competitive. We compete primarily on the basis of product design, including space utilization and aesthetic factors, product quality and durability, price, on-time delivery, service and technical support. We focus our efforts on the middle and high-end segments of the market, where product design, quality, durability and service are valued by the customer. Our Security Products segment competes against a number of domestic and foreign manufacturers. Our Marine Components segment competes with small domestic manufacturers and is minimally affected by foreign competitors.

​

Environmental, Social and Governance (“ESG”)

We seek to operate our business in line with sound ESG principles that include corporate governance, social responsibility, sustainability and cybersecurity. We believe ESG means conducting operations with high standards of environmental and social responsibility, practicing exemplary ethical standards, focusing on safety as a top priority, respecting and supporting our local communities, and continuously developing our employees. At our facilities, we undertake various environmental sustainability programs, and we promote social responsibility and volunteerism through programs designed to support and give back to the local communities in which we operate. Each of our locations maintains site-specific safety programs and disaster response and business continuity plans. All manufacturing facilities have detailed, site-specific emergency response procedures that we believe adequately address regulatory compliance, vulnerability to potential hazards, emergency response and action plans, employee training, alarms and warning systems and crisis communication.

At a corporate level, we engage in periodic reviews of our cybersecurity programs, including cybersecurity risk and threats. Our cybersecurity programs are built on operations and compliance foundations. Operations focus on continuous detection, prevention, measurement, analysis, and response to cybersecurity alerts and incidents and on emerging threats. Compliance establishes oversight of our cybersecurity programs by creating risk-based controls to protect the integrity, confidentiality, accessibility, and availability of company data stored, processed, or transferred. We periodically update our board of directors on our cyber-related risks and cybersecurity programs.  

In an effort to align our non-employee directors’ financial interests with those of our stockholders, our Board established share ownership guidelines for our non-management directors.  

Regulatory and Environmental Matters

We have a history of incorporating environmental management and compliance in our operations and decision making. We operate three low-emission manufacturing facilities and our production processes requiring waste-water discharge are consolidated at our Mauldin, South Carolina facility. This facility has received a ReWa Gold Award multiple years for its exemplary performance from Renewable Water Resources, an organization which sets regulatory and water policies for the Mauldin facility’s geographic region. In addition, we operate extensive scrap metal recycling programs to reduce landfill waste.

Our operations are subject to federal, state and local laws and regulations relating to the use, storage, handling, generation, transportation, treatment, emission, discharge, disposal, remediation of and exposure to hazardous and non-hazardous substances, materials and wastes. Our operations also are subject to federal, state and local laws and regulations relating to worker health and safety. We believe we are in substantial compliance with all such laws and regulations. To date, the costs of maintaining compliance with such laws and regulations have not significantly impacted our results. We currently do not anticipate any significant costs or expenses relating to such matters; however, it is possible future laws and regulations may require us to incur significant additional expenditures.

Human Capital Resources

Employees – Our operating results depend in part on our ability to successfully manage our human capital resources, including attracting, identifying, and retaining key talent. We have a well-trained labor force with a substantial number of long-tenured employees. We provide competitive compensation and benefits to our employees. In addition to salaries, these programs can include annual bonuses, defined contribution plans with employer matching opportunities, healthcare and insurance benefits, health savings and flexible spending accounts, paid time off, family leave, family care resources, employee assistance programs, and tuition assistance.

As of December 31, 2021, we employed 570 people, all in the United States. We believe our labor relations are good.

Health and Safety – Protecting the health and safety of our workforce, our customers, our business partners and the natural environment is one of our core values. We are committed to maintaining a strong safety culture where all workers meet or exceed required industry performance standards and continuously seek to improve occupational and process safety performance. We are conducting our business in ways that provide all personnel with a safe and healthy work environment and have established safety and environmental programs and goals to achieve such results. We expect

​

our manufacturing facilities to produce our products safely and in compliance with local regulations, policies, standards and practices intended to protect the environment and people, and we have established policies designed to promote such compliance. We require our employees to comply with such requirements. We provide our workers with the tools and training necessary to make the appropriate decisions to prevent accidents and injuries. Each of our operating facilities develops, maintains, and implements safety programs encompassing key aspects of their operations. In addition, management reviews and evaluates safety performance throughout the year.  We monitor conditions that could lead to a safety incident and keep track of injuries through reporting systems in accordance with laws in the jurisdictions in which we operate. We track this data to assess the quality of our safety performance. We use a Lost Time Incident Rate as a key measure of worker safety. The Lost Time Incident Rate is a standard Occupational Safety and Health Administration metric that calculates the number of incidents that result in time away from work. We had a Lost Time Incident Rate of three in 2019, nil in 2020, and one in 2021.

Diversity and Inclusion – We recognize that everyone deserves respect and equal treatment. We embrace diversity and collaboration in our workforce and our business initiatives. We are an equal opportunity employer and we base employment decisions on merit, competence and qualifications, without regard to race, color, national origin, gender, age, religion, disability, sex, sexual orientation or other characteristics protected by applicable law in the jurisdictions in which we operate. We promote a respectful, diverse and inclusive workplace in which all individuals are treated with respect and dignity.

Website and Available Information

Our fiscal year end is always the Sunday closest to December 31, and our operations are reported on a 52 or 53-week fiscal year. For presentation purposes, annual information in this Form 10-K is presented as ended on December 31. The actual date of our fiscal years ended December 31, 2019, 2020 and 2021 are December 29, 2019, January 3, 2021, and January 2, 2022, respectively. Our fiscal year ending December 31, 2021 was a 52-week year. We furnish our stockholders with annual reports containing audited financial statements. In addition, we file annual, quarterly and current reports; proxy and information statements and other information with the SEC. We also make our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and all related amendments, available free of charge through our website at www.compxinternational.com as soon as reasonably practical after they have been filed with the SEC. We also provide to anyone, without charge, copies of the documents upon written request. Requests should be directed to the attention of the Corporate Secretary at our address on the cover page of this Form 10-K.

Additional information, including our Audit Committee Charter, our Code of Business Conduct and Ethics and our Corporate Governance Guidelines, can also be found on our website. Information contained on our website is not a part of this Annual Report.

We are an electronic filer. The SEC maintains an internet website at www.sec.gov that contains reports, proxy and information statements and other information regarding issuers, such as us, that file electronically with the SEC.

ITEM 1A.RISK FACTORS

Listed below are certain risk factors associated with us and our businesses. In addition to the potential effect of these risk factors discussed below, any risk factor which could result in reduced earnings, operating losses, or reduced liquidity, could in turn adversely affect our ability to service our liabilities or pay dividends on our common stock or adversely affect the quoted market prices for our securities.

Operational Risk Factors

We operate in mature and highly competitive markets, resulting in pricing pressure and the need to continuously reduce costs.

Many of the markets we serve are highly competitive, with a number of competitors offering similar products. We focus our efforts on the middle and high-end segment of the market where we feel that we can compete due to the importance of product design, quality and durability to the customer. However, our ability to effectively compete is impacted by a number of factors. The occurrence of any of these factors could result in reduced earnings or operating losses.

​

Our development of innovative features for current products is critical to sustaining and growing our sales.

Historically, our ability to provide value-added custom engineered products that address requirements of technology and space utilization has been a key element of our success. We spend a significant amount of time and effort to refine, improve and adapt our existing products for new customers and applications. Since expenditures for these types of activities are not considered research and development expense under accounting principles generally accepted in the United States of America (“GAAP”), the amount of our research and development expenditures, which is not significant, is not indicative of the overall effort involved in the development of new product features. The introduction of new product features requires the coordination of the design, manufacturing and marketing of the new product features with current and potential customers. The ability to coordinate these activities with current and potential customers may be affected by factors beyond our control. While we will continue to emphasize the introduction of innovative new product features that target customer-specific opportunities, we do not know if any new product features we introduce will achieve the same degree of success that we have achieved with our existing products. Introduction of new product features typically requires us to increase production volume on a timely basis while maintaining product quality. Manufacturers often encounter difficulties in increasing production volumes, including delays, quality control problems and shortages of qualified personnel or raw materials. As we attempt to introduce new product features in the future, we do not know if we will be able to increase production volumes without encountering these or other problems, which might negatively impact our financial condition or results of operations.

Higher costs or limited availability of our raw materials could negatively impact our financial results.

Certain raw materials used in our products are commodities that are subject to significant fluctuations in price in response to world-wide supply and demand as well as speculative investor activity. Zinc and brass are the principal raw materials used in the manufacture of security products. Stainless steel and aluminum are the major raw materials used in the manufacture of marine components. These raw materials are purchased from several suppliers and are generally readily available from numerous sources. We occasionally enter into short-term raw material supply arrangements to mitigate the impact of future increases in commodity-related raw material costs and ensure supply. Materials purchased outside of these arrangements are sometimes subject to unanticipated and sudden price increases.

Certain components used in our products are manufactured by foreign suppliers located in China and elsewhere. Global economic and political conditions, including natural disasters, terrorist acts, global conflicts and public health crises such as pandemics, could prevent our vendors from being able to supply these components. Should our vendors not be able to meet their supply obligations or should we be otherwise unable to obtain necessary raw materials or components, we may incur higher supply costs or may be required to reduce production levels, either of which may decrease our liquidity or negatively impact our financial condition or results of operations as we may be unable to offset the higher costs with increases in our selling prices or reductions in other operating costs.

​

COVID-19 has affected our operations and may continue to affect our operations during 2022.

Our operations have been and may continue to be negatively impacted by COVID-19, specifically from disruptions to our supply chain, transportation networks and customers, which may compress our margins, including as a result of preventative and precautionary measures that we, other businesses and governments are taking. In addition, the ability of our suppliers and customers to operate may be significantly impacted by individuals contracting or being exposed to COVID-19 or as a result of associated control measures. Given the dynamic and uncertain nature and duration of COVID-19 and related variants, and the effectiveness of actions globally to contain or mitigate its effects, we cannot reasonably estimate the long-term impact of COVID-19 on our business, results of operations and overall financial performance.

We have 570 employees and operate three facilities, each of which specializes in certain manufacturing processes and is therefore dependent upon the other facilities to some extent to manufacture finished goods. With the onset of COVID-19, within each facility we enhanced cleaning and sanitization procedures, and implemented other health and safety protocols. We have generally been able to successfully operate through the pandemic; however, with the increase spread of new variants of  COVID-19, it is possible we may have  temporary closures at one or more of our facilities for the health and safety of our workforce if conditions warrant.

Legal, Compliance and Regulatory Risk Factors

Failure to protect our intellectual property rights or claims by others that we infringe their intellectual property rights could substantially harm our business.

We rely on patent, trademark and trade secret laws in the United States and similar laws in other countries to establish and maintain our intellectual property rights in our technology and designs. Despite these measures, any of our intellectual property rights could be challenged, invalidated, circumvented or misappropriated. Others may independently discover our trade secrets and proprietary information, and in such cases we could not assert any trade secret rights against such parties. Further, we do not know if any of our pending trademark or patent applications will be approved. Costly and time-consuming litigation could be necessary to enforce and determine the scope of our intellectual property rights. In addition, the laws of certain countries do not protect intellectual property rights to the same extent as the laws of the United States. Therefore, in certain jurisdictions, we may be unable to protect our technology and designs adequately against unauthorized third party use, which could adversely affect our competitive position.

Third parties may claim that we or our customers are infringing upon their intellectual property rights. Even if we believe that such claims are without merit, they can be time-consuming and costly to defend and distract our management’s and technical staff’s attention and resources. Claims of intellectual property infringement might also require us to redesign affected technology, enter into costly settlement or license agreements or pay costly damage awards, or face a temporary or permanent injunction prohibiting us from marketing or selling certain of our technology. If we cannot or do not license the infringed technology on reasonable pricing terms or at all, or substitute similar technology from another source, our business could be adversely impacted.

Climate change legislation could negatively impact our financial results or limit our ability to operate our businesses.

All of our production facilities are located in the United States and each requires energy, including electricity and natural gas in order to conduct operations.  The U.S. government has determined that the consumption of energy derived from fossil fuels is a major contributor to climate change and is contemplating regulatory changes in response to the potential impact of climate change, including legislation regarding carbon emission costs, Green House Gas (“GHG”) emissions and renewable energy targets. To date, legislation and regulatory actions related to climate change have not had a material adverse effect on our financial results. Until the timing, scope and extent of any future regulation becomes known, we cannot predict the effect on our business, results of operations or financial condition. However, if new legislation or regulatory actions related to climate change were to be enacted or implemented, it could negatively impact our future results from operations through increased costs of production, particularly as it relates to our energy requirements. If such increased costs of production were to materialize, we may be unable to pass price increases on to our customers to compensate for increased production costs, which may decrease our liquidity, operating income and results of operations. In addition, any adopted future climate change regulations could negatively impact our ability (or that of our customers and suppliers) to compete with companies situated in areas not subject to such limitations.  

​

General Risk Factors

Technology failures or cybersecurity breaches could have a material adverse effect on our operations.

We rely on information technology systems to manage, process and analyze data, as well as to facilitate the manufacture and distribution of our products to and from our plants. We receive, process and ship orders, manage the billing of and collections from our customers, and manage the accounting for and payment to our vendors. Although we have systems and procedures in place to protect our information technology systems, there can be no assurance that such systems and procedures will be sufficiently effective. Therefore, any of our information technology systems may be susceptible to outages, disruptions, or destruction from power outages, telecommunications failures, employee error, cybersecurity breaches or attacks, and other similar events. This could result in a disruption of our business operations, injury to people, harm to the environment or our assets, and/or the inability to access our information technology systems and could adversely affect our results of operations and financial condition.  We have in the past experienced, and we expect to continue to experience, cyber-attacks, including phishing, and other attempts to breach, or gain unauthorized access to our systems. To date we have not suffered breaches in our systems, either directly or through a trusted third-party vendor, which have led to material losses. Due to the increase in global cybersecurity incidents it has become increasingly difficult to obtain insurance coverage on reasonable pricing terms to mitigate some risks associated with technology failures or cybersecurity breaches, and we are experiencing such difficulties in obtaining insurance coverage.

Physical impacts of climate change could have a material adverse effect on our costs and operations.

​

Climate change may increase both the frequency and severity of extreme weather conditions and natural disasters such as hurricanes, thunderstorms, tornadoes, drought and snow or ice storms. Extreme weather conditions may increase our costs or cause damage to our facilities, and any damage resulting from extreme weather may not be fully insured. Furthermore, periods of extended inclement weather may inhibit our facility operations and delay or hinder shipments of our products to customers. Any such events could have a material adverse effect on our costs or results of operations.

ITEM 1B.UNRESOLVED STAFF COMMENTS

None.

ITEM 2.PROPERTIES

Our principal executive offices are located in leased space at 5430 LBJ Freeway, Dallas, Texas 75240. The following table sets forth the location, size and business operating segment for each of our principal operating facilities.

​

SP – Security Products business segment

MC – Marine Components business segment

We believe all of our facilities are well maintained and satisfactory for their intended purposes.

ITEM 3.LEGAL PROCEEDINGS

We are involved, from time to time, in various environmental, contractual, product liability, patent (or intellectual property), employment and other claims and disputes incidental to our business. See Note 10 to the Consolidated Financial Statements. We currently believe the disposition of all claims and disputes, individually or in the aggregate, should not have a material adverse effect on our consolidated financial condition, results of operations or liquidity.

​

ITEM 4.MINE SAFETY DISCLOSURES

Not applicable.

​

​

PART II

Common Stock and Dividends. Our Class A common stock is listed and traded on the NYSE American (symbol: CIX). As of February 22, 2022, there were approximately 18 holders of record of CompX Class A common stock.

Purchases of Equity Securities. Prior to 2019, our board of directors authorized various repurchases of our common stock in open market transactions, including block purchases, or in privately-negotiated transactions at unspecified prices and over an unspecified period of time. In 2021 we repurchased 75,000 shares, and we have 602,547 shares available for repurchase under the stock repurchase program at December 31, 2021. See Note 8 to our Consolidated Financial Statements.

The following table discloses certain information regarding the shares of our Class A common stock we purchased during the fourth quarter of 2021 (we made no purchases in October or December 2021). All of these purchases were made under the repurchase program in open market transactions.

​

​

​

Performance Graph. Set forth below is a line graph comparing the yearly change in our cumulative total stockholder returns on our Class A common stock against the cumulative total return of the Russell 2000 Index and an index of a self-selected peer group of companies for the period from December 31, 2016 through December 31, 2021. The peer group index is comprised of The Eastern Company and Strattec Security Corporation. The graph shows the value at December 31 of each year assuming an original investment of $100 at December 31, 2016 and reinvestment of dividends.

​

The information contained in the performance graph shall not be deemed “soliciting material” or “filed” with the SEC, or subject to the liabilities of Section 18 of the Securities Exchange Act, except to the extent we specifically request that the material be treated as soliciting material or specifically incorporate this performance graph by reference into a document filed under the Securities Act or the Securities Exchange Act.

Equity compensation plan information. We have a share based incentive compensation plan, approved by our stockholders, pursuant to which an aggregate of 200,000 shares of our Class A common stock can be awarded to non-employee members of our board of directors. At December 31, 2021, 136,450 shares are available for award under this plan. See Note 8 to the Consolidated Financial Statements.

ITEM 6.RESERVED

​

​

​

​

Business Overview

We are a leading manufacturer of engineered components utilized in a variety of applications and industries. Through our Security Products segment we manufacture mechanical and electrical cabinet locks and other locking mechanisms used in recreational transportation, postal, office and institutional furniture, cabinetry, tool storage and healthcare applications. We also manufacture stainless steel exhaust systems, gauges, throttle controls, wake enhancement systems, trim tabs and related hardware and accessories for the recreational marine and other industries through our Marine Components segment.

Operating Income Overview

We reported operating income of $20.5 million in 2021 compared to operating income of $11.8 million in 2020 and $17.7 million in 2019. Our operating income was negatively impacted by the COVID-19 pandemic in 2020, primarily in the second and third quarters, which significantly impacts operating income comparisons for the comparative periods. Beginning in the third quarter of 2020 and continuing through 2021, our sales volumes generally improved at both our business segments and the increase in operating income in 2021 over 2020 primarily resulted from the higher sales volumes. The decrease in operating income in 2020 over 2019 is primarily due to the decline in net sales and gross margin due to reduced demand resulting from the COVID-19 pandemic during 2020. See results of operations discussion below.

Our product offerings consist of a large number of products that have a wide variation in selling price and manufacturing cost, which results in certain practical limitations on our ability to quantify the impact of changes in individual product sales quantities and selling prices on our net sales, cost of sales and gross margin. In addition, small variations in period-to-period net sales, cost of sales and gross margin can result from changes in the relative mix of our products sold.

Results of Operations - 2021 Compared to 2020 and 2020 Compared to 2019

​

Net Sales. Net sales increased approximately $26.3 million in 2021 compared to 2020 primarily due to higher sales at both of our segments, particularly in the second quarter of 2021, as many of our customers were temporarily closed or reduced production during the second quarter of 2020 due to government ordered closures or reduced demand resulting from the COVID-19 pandemic. Beginning in the third quarter of 2020 and continuing through 2021, Marine Components sales exceeded pre-pandemic levels.  Security Products sales generally improved since third quarter of 2020 but did not recover to pre-pandemic levels until the second quarter of 2021 when sales improved in markets that had been slower to recover from the COVID-19 pandemic, particularly sales to distributors and the office furniture market.

​

Net sales decreased approximately $9.7 million in 2020 compared to 2019 primarily due to lower Security Products sales across a variety of markets due to reduced demand resulting from the COVID-19 pandemic, offset slightly by higher Marine Component sales to the towboat market.

Cost of Sales and Gross Margin. Cost of sales increased in 2021 compared to 2020 primarily due to the effects of the higher sales, as well as increased production costs at both Security Products and Marine Components. Gross margin as a percentage of sales increased over the same period due to the increase in the Security Products gross margin percentage partially offset by the decrease in the Marine Components gross margin percentage.

Cost of sales decreased in 2020 compared to 2019 primarily due to the effects of lower sales for Security Products slightly offset by higher Marine Component sales. Gross margin as a percentage of sales decreased over the same period primarily as a result of lower gross margin percentage at Security Products.

Operating Costs and Expenses. Operating costs and expenses consist primarily of sales and administrative-related personnel costs, sales commissions and advertising expenses directly related to product sales and administrative costs relating to business unit and corporate management activities, as well as gains and losses on sales of property and equipment. Operating costs and expenses increased in 2021 compared to 2020 predominantly due to higher salary and benefit costs which increased by $.9 million. As a percentage of sales, operating costs and expenses decreased in 2021 compared to 2020 primarily due to the effect of higher sales.

Operating costs and expenses in 2020 were comparable to 2019. As a percentage of sales, operating costs and expenses increased in 2020 compared to 2019 due to the effect of lower sales.

Operating Income. As a percentage of net sales, operating income increased in 2021 compared to 2020 and decreased in 2020 compared to 2019. Operating margins were primarily impacted by the factors impacting net sales, cost of sales, gross margin and operating costs discussed above.

General. Our profitability primarily depends on our ability to utilize our production capacity effectively, which is affected by, among other things, the demand for our products and our ability to control our manufacturing costs, primarily comprised of labor costs and materials. The materials used in our products consist of purchased components and raw materials some of which are subject to fluctuations in the commodity markets such as zinc, brass and stainless steel. Total material costs represented approximately 44% of our cost of sales in 2021, with commodity-related raw materials accounting for approximately 16% of our cost of sales. Prices for the primary commodity-related raw materials used in the manufacture of our locking mechanisms, primarily zinc and brass, remained relatively stable during 2020 but generally increased throughout 2021. Prices for stainless steel, the primary raw material used for the manufacture of marine exhaust headers and pipes and wake enhancement systems, remained relatively stable in 2020 but experienced significant volatility during 2021. Based on current economic conditions, we expect prices for our primary commodity-related raw materials and other manufacturing materials to be volatile during 2022.

We occasionally enter into short-term commodity-related raw material supply arrangements to mitigate the impact of future increases in commodity related raw material costs. See Item 1 - “Business- Raw Materials.”

Interest Income. Interest income in 2021 decreased compared to 2020 primarily due to lower average loan balances on our loan to an affiliate. Interest income in 2020 decreased compared to 2019 primarily due to lower average loan balances and lower interest rates on our loan to an affiliate as well as lower interest rates on our cash investments. See Note 9 to the Consolidated Financial Statements.

Provision for income taxes. A tabular reconciliation of our actual tax provision to the U.S. federal statutory income tax rate of 21% is included in Note 7 to the Consolidated Financial Statements. As a member of the group of companies consolidated for U.S. federal income tax purposes with Contran, the parent of our consolidated U.S. federal income tax group, we compute our provision for income taxes on a separate company basis, using the tax elections made by Contran.

​

Our effective income tax rate was 24% in each of 2019, 2020 and 2021. See Notes 7 and 10 to our Consolidated Financial Statements. We currently expect our effective income tax rate for 2022 to be comparable to our effective income tax rate for 2021.

Segment Results

The key performance indicator for our segments is the level of their operating income (see discussion below). For additional information regarding our segments refer to Note 2 to our Consolidated Financial Statements.

​

Security Products. Security Products net sales increased 20% to $105.1 million in 2021 compared to $87.9 million in 2020 when it experienced reduced demand across a variety of markets due to COVID-19. Relative to prior year, sales were $7.2 million higher to the government security market, $4.9 million higher to the transportation market, and $2.0 million higher to distribution customers. Gross margin as a percentage of net sales for 2021 increased as compared to 2020 due to increased coverage of fixed costs from higher sales, partially offset by higher production costs including increased raw materials costs across a variety of commodities and component inputs, higher shipping costs, and increased labor costs primarily due to higher overtime costs and increased headcount. Operating income margin increased for 2021 compared to 2020 primarily due to increased coverage of operating costs and expenses on higher sales, partially offset by the higher production costs impacting gross margin and increased sales and administrative-related salary and benefit costs of $.7 million.

Security Products net sales decreased 12% to $87.9 million in 2020 compared to $99.3 million in 2019. Certain security products market segments were slower to recover from the negative impact of COVID-19, primarily in the second and third quarters, including transportation which had $4.4 million lower sales than the 2019, distribution customers which were $2.5 million lower than 2019, and office furniture which was $1.8 million lower than the same period in 2019. Gross margin and operating income margin for 2020 declined as compared to 2019 primarily due to lower sales and higher cost inventory produced during the second and third quarters and sold in the last half of the year. Security Products inventory produced during the second and third quarters of 2020 had a higher carrying value compared to prior periods due to higher cost per unit of production as a result of lower production volumes during these quarters of 2020. This negatively impacted our gross margin and operating income margin as this higher cost inventory was sold during the last half of 2020.

​

Additionally, gross margin and operating income margin were unfavorably impacted by employer paid medical costs, unrelated to the pandemic, which increased $2.1 million in 2020 compared to 2019.

​

Marine Components. Marine Components net sales increased 34% in 2021 as compared to 2020 primarily due to increased sales of $7.2 million to several original equipment boat manufactures in the towboat market. Gross margin as a percentage of sales decreased in 2021 compared to 2020 as increased coverage of fixed costs from higher sales were more than offset by higher production costs including raw materials costs (primarily stainless steel), higher shipping costs, and increased labor costs resulting from higher overtime costs and increased headcount. Operating income as a percentage of net sales increased slightly in 2021 compared to 2020 due to increased coverage of operating costs and expenses from higher sales, partially offset by the factors impacting gross margin.

Marine Components net sales increased 7% in 2020 as compared to 2019 primarily due to increased sales of $2.9 million to the towboat market, primarily wake enhancement systems and surf pipes to an original equipment boat manufacturer, predominantly in the second half of the year. Gross margin as a percentage of sales in 2020 was slightly below 2019 due to higher cost inventory produced during the second quarter and sold in the third quarter of the year, as well as higher depreciation expense resulting from the timing of capital expenditures. Operating income as a percentage of net sales increased in 2020 compared to 2019 principally due to the slight decrease in operating costs and expenses.

Outlook. Beginning in the second half of 2020, our sales began to steadily improve from the historically low levels we experienced during the second quarter of 2020 as a result of the COVID-19 pandemic. Throughout 2021, we experienced strong demand at both our segments. Our manufacturing facilities operated at elevated production rates during 2021 in line with improved demand, although labor markets are tight in each of the regions in which we operate and, as a result, we have experienced and continue to have challenges maintaining staffing levels aligned with current and forecasted demand, particularly at our Marine Components segment.

Based on current market conditions, we expect demand levels to remain strong in 2022 and we expect to report increased net sales and operating income in 2022 compared to 2021. Our supply chains remain intact, although the current global and domestic supply chain disruptions continue to present challenges in sourcing certain raw materials due to increased lead times, availability shortages and transportation and logistics delays. Thus far we have been able to manage through these disruptions with minimal impact on our operations.  In addition, we are experiencing increased production costs including higher labor, shipping, and increasing costs of many of the raw materials we use including zinc, brass and stainless steel. In response, we implemented price increases and surcharges; however, the extent to which the price increases and surcharges will mitigate the rising costs is uncertain and we expect increasing production costs will negatively impact gross margins in 2022 as higher cost inventories are sold. Our operations teams meet frequently to ensure we are taking appropriate actions to minimize material or supply related operational disruptions, manage inventory levels, improve operating margins and to maintain a safe working environment for all our employees.

Our expectations for our operations and the markets we serve are based on a number of factors outside our control. As noted above, there are global and domestic supply chain challenges and any future impacts of COVID-19 on our operations will depend on, among other things, any future disruption in our operations or our suppliers’ operations, demand for our products and the timing and effectiveness of the global measures deployed to fight COVID-19, all of which remain uncertain and cannot be predicted.

​

​

Critical Accounting Policies and Estimates

Our significant accounting policies are more fully described in Note 1 to our Consolidated Financial Statements. Our Consolidated Financial Statements have been prepared in conformity with accounting principles generally accepted in the United States of America (GAAP) which requires us to make estimates, judgments, and assumptions we believe are reasonable based on our historical experience, contract terms, observations of known trends in our company and the industry as a whole and information available from other outside sources. Our estimates affect the reported amounts of assets and liabilities and related disclosures of contingent assets and liabilities at the date of the financial statements, and the reported amounts of revenue and expense during the reporting period. Actual results may differ from initial estimates.

We believe the most critical accounting policies and estimates involving significant judgments and estimates primarily relate to the considerations in the impairment assessments for goodwill and certain long-lived assets. We have discussed the development, selection and disclosure of our critical accounting estimates with the Audit Committee of our Board of Directors.

When performing a qualitative assessment, considerable management judgment is necessary to evaluate the qualitative impact of events and circumstances on the fair value of a reporting unit. Events and circumstances considered in our impairment evaluations, such as historical profits and stability of the markets served, are consistent with factors utilized with our internal projections and operating plan. However, future events and circumstances could result in materially different findings which could result in the recognition of a material goodwill impairment.

Evaluations of possible impairment utilizing the quantitative impairment test require us to estimate, among other factors: forecasts of future operating results, revenue growth, operating margin, tax rates, capital expenditures, depreciation, working capital, weighted average cost of capital, long-term growth rates, risk premiums, terminal values, and fair values of our reporting units and assets. The goodwill impairment test is subject to uncertainties arising from such events as changes in competitive conditions, the current general economic environment, material changes in growth rate assumptions that could positively or negatively impact anticipated future operating conditions and cash flows, changes in the discount rate, and the impact of strategic decisions. If any of these factors were to materially change, such change may require revaluation of our goodwill. Changes in estimates or the application of alternative assumptions could produce significantly different results.

In 2021, we used the qualitative assessment for our annual impairment test and determined it was not necessary to perform the quantitative goodwill impairment test, as we concluded it is more-likely- than-not the fair value of the Security Products reporting unit exceeded its carrying amount. See Notes 1 and 5 to our Consolidated Financial Statements.

​

Significant judgment is required in estimating such cash flows. Adverse changes in such estimates of future net cash flows or estimates of fair value could result in an inability to recover the carrying value of the long-lived asset, thereby possibly requiring an impairment charge to be recognized in the future. We do not assess our property and equipment for impairment unless certain impairment indicators are present. We did not evaluate any long-lived assets for impairment during 2021 because no such impairment indicators were present.

Liquidity and Capital Resources

Summary

Our primary source of liquidity on an on-going basis is our cash flow from operating activities, which is generally used to (i) fund capital expenditures, (ii) repay short-term or long-term indebtedness incurred primarily for capital expenditures, business combinations or buying back shares of our outstanding stock and (iii) provide for the payment of dividends (if declared). From time-to-time, we may incur indebtedness to fund capital expenditures, business combinations or other investment activities. In addition, from time-to-time, we may also sell assets outside the ordinary course of business, the proceeds of which are generally used to repay indebtedness (including indebtedness which may have been collateralized by the assets sold) or to fund capital expenditures or business combinations.

Consolidated cash flows

Operating activities. Trends in cash flows from operating activities, excluding changes in assets and liabilities, for the last three years have generally been similar to the trends in our earnings. Depreciation and amortization were comparable in each of 2021, 2020 and 2019. See Note 1 to our Consolidated Financial Statements.

Changes in assets and liabilities result primarily from the timing of production, sales and purchases. Such changes in assets and liabilities generally tend to even out over time. However, year-to-year relative changes in assets and liabilities can significantly affect the comparability of cash flows from operating activities. Cash provided by operating activities was $10.5 million in 2021 compared to $15.5 million in 2020. The $5.0 million decrease in cash provided by operating activities was primarily the net result of:

Cash provided by operating activities was $15.5 million in 2020 compared to $18.5 million in 2019. The $3.0 million decrease in cash provided by operating activities was primarily the net result of:

Relative changes in working capital can have a significant effect on cash flows from operating activities. As shown below, our total average days sales outstanding increased from December 31, 2020 to December 31, 2021 primarily

​

as a result of the timing of sales and collections in the last month of 2021 as compared to 2020. For comparative purposes, we have provided 2019 numbers below.

​

As shown below, our average number of days in inventory increased from December 31, 2020 to December 31, 2021 due to increased raw material and production costs as well as increased purchases of certain components and raw materials that have longer lead times or for which we have experienced availability issues. For comparative purposes, we have provided 2019 numbers below.

Investing activities. Capital expenditures have primarily emphasized improving our manufacturing facilities and investing in manufacturing equipment, utilizing new technologies and increased automation of the manufacturing process, to provide for increased productivity and efficiency in order to meet expected customer demand and properly maintain our facilities and technology infrastructure. Capital expenditures were $3.2 million in 2019, $1.7 million in 2020 and $4.1 million in 2021. As a result of the COVID-19 pandemic, we limited 2020 expenditures to those required to meet our expected customer demand and those required to properly maintain our facilities and technology infrastructure. Our 2021 capital expenditures increased above pre-pandemic levels as we accelerated the timeline for certain projects designed to increase capacity and improve our capabilities in response to strong customer demand. See Note 2 to our Consolidated Financial Statements.

We expect our capital expenditures for 2022 will be approximately $6.7 million primarily to increase our capacity and address our capability needs as well as maintain and improve the cost-effectiveness of our facilities, equipment and technology infrastructure. Capital spending for 2022 is expected to be funded through cash on hand and cash generated from operations.

We have entered into an unsecured revolving demand promissory note with Valhi under which, as amended, we have agreed to loan Valhi up to $30 million. Our loan to Valhi, as amended, bears interest at prime rate plus 1.00%, payable quarterly, with all principal due on demand, but in any event no earlier than December 31, 2023. Loans made to Valhi at any time under the agreement are at our discretion. Under the promissory note, Valhi repaid a net $5.9 million in 2019 ($34.9 million of gross borrowings and $40.8 million of gross repayments), borrowed a net $1.4 million in 2020 ($34.8 million of gross borrowings and $33.4 million of gross repayments) and repaid a net $10.8 million in 2021 ($29.8 million of gross borrowings and $40.6 million of gross repayments). See Note 9 to our Consolidated Financial Statements.

Financing activities. Cash dividends paid totaled $3.5 million ($.28 per share, or $.07 per share per quarter) in 2019, $5.0 million ($.40 per share, or $.10 per share per quarter) in 2020, and $9.9 million ($.80 per share, or $.20 per share per quarter) in 2021. On March 2, 2022 our board of directors declared a first quarter 2022 dividend of $.25 per share, to be paid on March 22, 2022 to CompX stockholders of record as of March 14, 2022. The declaration and payment of future dividends and the amount thereof, if any, is discretionary and is dependent upon our results of operations, financial condition, cash requirements for our businesses, contractual requirements and restrictions and other factors deemed relevant by our board of directors. The amount and timing of past dividends is not necessarily indicative of the amount or timing of any future dividends which we might pay.

In addition, during 2021, we acquired 75,000 shares of our Class A common stock in market transactions for $1.3 million.

​

Future Cash Requirements

We believe cash generated from operations together with cash on hand will be sufficient to meet our liquidity needs for working capital, capital expenditures, debt service and dividends (if declared) for the next twelve months and our long term obligations for the next five years. To the extent that actual operating results or other developments differ materially from our expectations, our liquidity could be adversely affected.

All of our $76.6 million aggregate cash and cash equivalents at December 31, 2021 were held in the U.S.

We periodically evaluate our liquidity requirements, alternative uses of capital, capital needs and available resources in view of, among other things, our capital expenditure requirements, dividend policy and estimated future operating cash flows. As a result of this process, we have in the past and may in the future seek to raise additional capital, refinance or restructure indebtedness, issue additional securities, repurchase shares of our common stock, modify our dividend policy or take a combination of such steps to manage our liquidity and capital resources. In the normal course of business, we may review opportunities for acquisitions, joint ventures or other business combinations in the component products industry. In the event of any such transaction, we may consider using available cash, issuing additional equity securities or increasing our indebtedness or that of our subsidiaries.

Commitments and contingencies

As more fully described in the notes to the Consolidated Financial Statements, we are a party to various agreements that contractually and unconditionally commit us to pay certain amounts in the future. See Note 10 to our Consolidated Financial Statements. Additionally, we have purchase obligations of $30.7 million ($30.1 million payable in 2022 and $.6 million payable in 2023) which consists of open purchase orders and contractual obligations, primarily commitments to purchase raw materials and for capital projects in process at December 31, 2021. The timing and amount for purchase obligations are based on the contractual payment amount and the contractual payment date for those commitments.

Recent accounting pronouncements

None.

ITEM 7A.QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

General. We are exposed to market risk from changes in interest rates and raw materials prices.

Interest rates. We are exposed to market risk from changes in interest rates, primarily related to our note receivable from affiliate. The outstanding principal amount of the note receivable from affiliate of $18.7 million at December 31, 2021 bears interest at prime plus 1.0% (4.25% at December 31, 2021). We received interest income of $1.2 million from the note during 2021.

Raw materials. We will occasionally enter into short term commodity-related raw material supply arrangements to mitigate the impact of future increases in commodity-related raw material costs. We do not have long-term supply agreements for our raw material requirements because either we believe the risk of unavailability of those raw materials is low and we believe the downside risk of price volatility to be too great or because long-term supply agreements for those materials are generally not available. We do not engage in commodity raw material hedging programs.

ITEM 8.FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

The information called for by this Item is contained in a separate section of this Annual Report. See “Index of Financial Statements” (page F-1).

None.

​

ITEM 9A.CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures. We maintain disclosure controls and procedures which, as defined in Exchange Act Rule 13a-15(e), means controls and other procedures that are designed to ensure that information required to be disclosed in the reports that we file or submit to the SEC under the Securities Exchange Act of 1934, as amended (the “Act”), is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information we are required to disclose in the reports that we file or submit to the SEC under the Act is accumulated and communicated to our management, including our principal executive officer and our principal financial officer, or persons performing similar functions, as appropriate to allow timely decisions to be made regarding required disclosure. Our management with the participation of Scott C. James, our President and Chief Executive Officer, and Michael S. Simmons, our Senior Vice President and Chief Financial Officer, has evaluated the design and operating effectiveness of our disclosure controls and procedures as of December 31, 2021. Based upon their evaluation, these executive officers have concluded that our disclosure controls and procedures are effective as of the date of such evaluation.

Management’s Report on Internal Control Over Financial Reporting. Our management is responsible for establishing and maintaining adequate internal control over financial reporting which, as defined in Exchange Act Rule 13a-15(f), means a process designed by, or under the supervision of, our principal executive and principal financial officers, or persons performing similar functions, and effected by our board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles (“GAAP”), and includes those policies and procedures that:

Our evaluation of the effectiveness of our internal control over financial reporting is based upon the framework established in Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission in 2013 (commonly referred to as the “2013 COSO” framework). Based on our evaluation under that framework, our management has concluded that our internal control over financial reporting was effective as of December 31, 2021.

This annual report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by our registered public accounting firm pursuant to rules of the SEC that permit us to provide only management’s report in this annual report.

Changes in Internal Control Over Financial Reporting. There have been no changes in our internal control over financial reporting during the quarter ended December 31, 2021 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Certifications. Our chief executive officer and chief financial officer are required to, among other things, quarterly file a certification with the SEC regarding the quality of our public disclosures, as required by Section 302 of the Sarbanes-Oxley Act of 2002. We have filed the certifications for the quarter ended December 31, 2021 as exhibits 31.1 and 31.2 to this Annual Report on Form 10-K.

ITEM 9B.OTHER INFORMATION

Not applicable.

​

ITEM 9C. DISCLOSURE REGARDING FOREIGN JURSIDICTIONS THAT PREVENT INSPECTIONS

​

Not applicable.

​

​

PART III

ITEM 10.DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

The information required by this Item is incorporated by reference to our definitive Proxy Statement to be filed with the Securities and Exchange Commission pursuant to Regulation 14A within 120 days after the end of the fiscal year covered by this report (“Proxy Statement”).

ITEM 11.EXECUTIVE COMPENSATION

The information required by this Item is incorporated by reference to our Proxy Statement.

The information required by this Item is incorporated by reference to our Proxy Statement.

The information required by this Item is incorporated by reference to our Proxy Statement. See also Note 9 to the Consolidated Financial Statements.

ITEM 14.PRINCIPAL ACCOUNTING FEES AND SERVICES

The information required by this Item is incorporated by reference to our Proxy Statement.

​

​

PART IV

ITEM 15.EXHIBITS, FINANCIAL STATEMENT SCHEDULES

The consolidated financial statements listed on the accompanying Index of Financial Statements (see page F-1) are filed as part of this Annual Report.

All financial statement schedules have been omitted either because they are not applicable or required, or the information that would be required to be included is disclosed in the notes to the consolidated financial statements.

We have retained a signed original of any of these exhibits that contain signatures, and we will provide such exhibits to the Commission or its staff. Included as exhibits are the items listed in the Exhibit Index. We, upon request, will furnish a copy of any of the exhibits listed below upon payment of $4.00 per exhibit to cover our costs of furnishing the exhibits. Instruments defining the rights of holders of long-term debt issues which do not exceed 10% of consolidated total assets will be furnished to the Commission upon request. Such requests should be directed to the attention of our Corporate Secretary at our corporate offices located at 5430 LBJ Freeway, Suite 1700, Dallas, Texas 75240.

​

​

​

​

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

​

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed by the following persons in the capacities and on the dates indicated.

​

​

​

​

​

​

Annual Report on Form 10-K

Items 8 and 15(a)

Index of Financial Statements

​

All financial statement schedules have been omitted either because they are not applicable or required, or the information that would be required to be included is disclosed in the notes to the consolidated financial statements.

​

​

​

​

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Stockholders of CompX International Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of CompX International Inc. and its subsidiaries (the “Company”) as of January 2, 2022 and January 3, 2021, and the related consolidated statements of income, of stockholders’ equity and of cash flows for each of the three years in the period ended January 2, 2022, including the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of January 2, 2022 and January 3, 2021, and the results of its operations and its cash flows for each of the three years in the period ended January 2, 2022 in conformity with accounting principles generally accepted in the United States of America.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits of these consolidated financial statements in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matters

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that (i) relates to accounts or disclosures that are material to the consolidated financial statements and (ii) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Goodwill Impairment Assessment – Security Products Reporting Unit

As described in Note 5 to the consolidated financial statements, the Company’s consolidated goodwill balance was $23.7 million as of December 31, 2021, all of which related to the Company’s Security Products reporting unit, which corresponds to its Security Products operating segment. As disclosed by management, management performs an annual goodwill impairment test in the third quarter of each year, or at other times whenever an event occurs or circumstances change that would more-likely-than-not reduce the fair value of a reporting unit below its carrying value. Management first assesses qualitative factors to determine whether it is more likely than not the fair value of the Security Products

F-2

​

reporting unit is less than its carrying value. When performing a qualitative assessment, considerable management judgment is necessary to evaluate the qualitative impact of events and circumstances on the fair value of a reporting unit. Events and circumstances considered in management’s impairment evaluations include historical profits and stability of the markets served. In 2021, management used the qualitative assessment for the annual impairment test and determined it was not necessary to perform the quantitative goodwill impairment test, as management concluded it was more likely than not the fair value of the Security Products reporting unit exceeded its carrying amount.

The principal considerations for our determination that performing procedures relating to the goodwill impairment assessment of the Security Products reporting unit is a critical audit matter are (i) the significant judgment by management when performing the qualitative impairment assessment and (ii)  the high degree of auditor judgment and subjectivity in performing procedures and evaluating evidence relating to management’s qualitative impairment assessment.

Addressing the matter involved performing procedures and evaluating audit evidence in connection with forming our overall opinion on the consolidated financial statements. These procedures included testing the effectiveness of controls relating to management’s goodwill impairment assessment and the review of qualitative factors affecting the Security Products reporting unit. These procedures also included, among others, (i) evaluating management’s qualitative impairment assessment by analyzing financial performance of the Security Products reporting unit, the Company’s market capitalization and other events or circumstances impacting the reporting unit and (ii) comparing actual financial performance with forecasted financial performance used in previous impairment assessments to evaluate management’s assessment of whether it is more likely than not that the fair value of each reporting unit is less than the carrying value.

/s/ PricewaterhouseCoopers LLP

Dallas, Texas

March 2, 2022

We have served as the Company’s auditor since 1993.

​

​

F-3

​

COMPX INTERNATIONAL INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(In thousands)

​

See accompanying Notes to Consolidated Financial Statements.

​

F-4

​

COMPX INTERNATIONAL INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF INCOME

(In thousands, except per share data)

​

See accompanying Notes to Consolidated Financial Statements.

​

​

​

​

​

​

​

​

​

​

​

F-5

​

COMPX INTERNATIONAL INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

Years ended December 31, 2019, 2020 and 2021

(In thousands, except per share data)

​

​

See accompanying Notes to Consolidated Financial Statements.

​

F-6

​

COMPX INTERNATIONAL INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)