COOL TECHNOLOGIES, INC. - Quarter Report: 2021 June (Form 10-Q)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q 

(Mark One)

Commission file number: 000-53443

Registrant’s telephone number, including area code: (813) 975-7467

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒     No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒     No ☐

Indicate by check mark whether the registrant is a large, accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large, accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Securities registered pursuant to Section 12(b) of the Act: None.

As of August 12, 2021, there were 577,760,657 shares of common stock, $0.001 par value, issued and outstanding.

COOL TECHNOLOGIES, INC.

Table of Contents

CAUTIONARY STATEMENT ON FORWARD-LOOKING INFORMATION

This Quarterly Report on Form 10-Q contains “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995, Section 27A of the Securities Act of 1933, as amended, or the Securities Act, and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Forward-looking statements discuss matters that are not historical facts. Because they discuss future events, conditions or financial performance forward-looking statements may include words such as “anticipate,” “believe,” “estimate,” “intend,” “could,” “should,” “would,” “may,” “seek,” “plan,” “might,” “will,” “expect,” “anticipate,” “predict,” “project,” “forecast,” “potential,” “continue” negatives thereof or similar expressions. Forward-looking statements speak only as of the date they are made, are based on various underlying assumptions and current expectations about the future and are not guarantees. Such statements involve known and unknown risks, uncertainties and other factors that may cause our actual results, level of activity, performance or achievement to be materially different from the results of operations or plans expressed or implied by such forward-looking statements. We cannot predict all of the risks and uncertainties. Accordingly, such information should not be regarded as representations that the results or conditions described in such statements or that our objectives and plans will be achieved, and we do not assume any responsibility for the accuracy or completeness of any of these forward-looking statements. These forward-looking statements are found at various places throughout this Quarterly Report on Form 10-Q and include information concerning possible or assumed future results of our operations, including statements about potential sales and revenues; acquisition or merger targets; business strategies; future cash flows; financing plans; plans and objectives of management; any other statements regarding future acquisitions, future cash needs, future operations, business plans and future financial results, and any other statements that are not historical facts.

These forward-looking statements represent our intentions, plans, expectations, assumptions and beliefs about future events and are subject to risks, uncertainties and other factors. Many of those factors are outside of our control and could cause actual results to differ materially from the results expressed or implied by those forward-looking statements. In light of these risks, uncertainties and assumptions, the events described in the forward-looking statements might not occur or might occur to a different extent or at a different time than we have described. You are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of the Quarterly Report on Form 10-Q. All subsequent written and oral forward-looking statements concerning other matters addressed in this Quarterly Report on Form 10-Q and attributable to us or any person acting on our behalf are expressly qualified in their entirety by the cautionary statements contained or referred to in this Quarterly Report on Form 10-Q.

Except to the extent required by law, we undertake no obligation to update or revise any forward-looking statements, whether as a result of new information, future events, a change in events, conditions, circumstances or assumptions underlying such statements, or otherwise.

PART I. Financial Information

Item 1.Consolidated Financial Statements

Cool Technologies, Inc. and Subsidiary

Consolidated Balance Sheets

See accompanying notes to consolidated financial statements.

Cool Technologies, Inc. and Subsidiary

Consolidated Statements of Operations

(Unaudited)

 See accompanying notes to consolidated financial statements

See accompanying notes to consolidated financial statements

Cool Technologies, Inc. and Subsidiary

Consolidated Statements of Cash Flows

(Unaudited)

See accompanying notes to consolidated financial statements.

Cool Technologies, Inc. and Subsidiary

Notes to Consolidated Financial Statements

(Unaudited)

Note 1 – Description of Business and Summary of Significant Accounting Policies

Description of Business

Cool Technologies, Inc. and subsidiary, (“the Company” or “Cool Technologies” or “CoolTech”) was incorporated in the State of Nevada in July 2002. In April 2014, CoolTech formed Ultimate Power Truck, LLC (“Ultimate Power Truck” or “UPT”), of which the Company owns 95% and a shareholder of Cool Technologies owns 5%. Cool Technologies was formerly known as Bibb Corporation, as Z3 Enterprises, and as HPEV, Inc. On August 20, 2015, the Company changed its name to Cool Technologies, Inc.

The Company’s technologies can be divided into two distinct but complementary categories: a) mobile power generation and b) heat dispersion technology.

The Company has developed and is commercializing a mobile power generation system that enables work trucks retrofitted with the system to generate electric power. The Company intends to sell the mobile power generator system to government, commercial and fleet vehicle owners. It may license its system as well. CoolTech has also developed and intends to commercialize patented heat dispersion technologies by licensing them to electric motor, pump and vehicle component manufacturers. In preparation, CoolTech has applied for trademarks for its MG system as well as one of its technologies and its acronym. Cool Technologies currently owns one trademark: TEHPC (Totally Enclosed Heat Pipe Cooled).

The Company believes that its proprietary technologies, including the patent portfolio and trade secrets, can help increase the efficiency and positively effect manufacturing cost structure in several large industries beginning with motors/generators and fleet vehicles. The markets for products utilizing the technologies include consumer, industrial, agricultural and military markets, both in the U.S. and worldwide.

As of June 30, 2021, we have seven US patents, one Canadian patent, two granted patents (1 Mexican, 1 Canadian) and two pending applications (1 in the US, 1 in Brazil) covering composite heat structures, motors, and related structures, heat pipe architecture, and applications (commonly referred to as “thermal” or “heat dispersion technology”). Cool Technologies also has Patent Cooperation Treaty (“PCT”) applications filed for a heat pipe cooled brake system and radial vent thermal technology as well as a pending PCT application that covers integrated electrical power generation methods and systems.

Basis of Presentation

The accompanying consolidated financial statements as of June 30, 2021, have been derived from unaudited financial statements. They include the accounts of Cool Technologies, Inc. and Ultimate Power Truck, LLC. Intercompany accounts and transactions have been eliminated. The accompanying unaudited interim consolidated financial statements have been prepared on the same basis as the annual audited financial statements and in accordance with accounting principles generally accepted in the United States (“GAAP”) for interim financial information and the rules and regulations of the Securities and Exchange Commission (“SEC”) for interim financial statements. In the opinion of management, such unaudited information includes all adjustments (consisting only of normal recurring accruals) necessary for a fair presentation of this interim information.

Noncontrolling interest represents the 5% third-party interest in UPT. There are no restrictions on the transfer of funds or net assets from UPT to Cool Technologies.

Operating results and cash flows for interim periods are not necessarily indicative of results that can be expected for the entire year. The information included in this report should be read in conjunction with the audited financial statements and notes thereto included in the Annual Report on Form 10-K for the year ended December 31, 2020.

Going Concern

The accompanying consolidated financial statements have been prepared assuming the Company will continue as a going concern. CoolTech has incurred net losses of $58,165,476 since inception and has not commenced operations, raising substantial doubt about its ability to continue as a going concern. Management believes that the Company’s ability to continue as a going concern is dependent on its ability to generate revenue, achieve profitable operations and repay obligations when they come due and raising additional capital. There cannot be any assurance that the Company will ever generate revenue or even if it does generate revenue that it will achieve profitable operations. Furthermore, no assurance can be given that any future financing will be available or, if available, that it will be on terms that are satisfactory to the Company. Even if the Company is able to obtain additional financing, it may contain undue restrictions on our operations, in the case of debt financing, or cause substantial dilution for our stockholders, in case of equity financing.

As of the filing date of this Quarterly Report on Form 10-Q, management is negotiating additional non-dilutive funding arrangements to support completion of the initial phases of the Company’s business plan: to license its thermal technologies and applications, including submersible dry-pit applications and to license and sell mobile generation retrofit kits. There can be no assurance, however, that the Company will be successful in accomplishing these objectives. Consequently, it may have to curtail or cease operations if funding is not received by the end of the third quarter.

Recent Accounting Guidance Not Yet Adopted

Management does not believe that any recently issued, but not yet effective accounting pronouncements, when adopted, will have a material effect on the accompanying consolidated financial statements.

Note 2 – Customer deposits – Related party

Customer deposits represent advance payments of $400,000 received on orders that have not yet been fulfilled, with companies controlled by the individual who is the 5% owner of UPT and a shareholder of Cool Technologies.

Note 3 – Debt

Debt consists of the following:

Notes Payable

From September 5 – 7, 2018, the Company entered into Promissory Note Agreements with two accredited investors. CoolTech received $250,000 in financing and promised to pay the principal amount together with simple interest of 15% per annum. Furthermore, the Company committed to pay the principal amount and accrued interest within 30 days of the receipt of funds from debt or surety bond financing. In exchange, the Company granted a security interest in all of the Company’s intellectual property as collateral and it issued cashless warrants to purchase 2,000,000 shares of common stock at an exercise price of $0.05. The warrants expire after five years.

On September 11, 2018, the Company entered into Promissory Note Agreements with an accredited investor. CoolTech received $250,000 in financing and promised to pay the principal amount together with simple interest of 15% per annum on or before the one-year anniversary. Furthermore, the Company committed to pay the principal amount and accrued interest within 30 days of the receipt of funds from debt or surety bond financing. In exchange, the Company granted a security interest in all of the Company’s intellectual property as collateral and it issued cashless warrants to purchase 2,000,000 shares of common stock at an exercise price of $0.05. The warrants expire after five years. On March 16, 2020, the investor signed an amendment to the agreement extending the maturity date until April 30, 2020. As of the filing date, the Company has not received a notice of default.

From September 7 - 17, 2018, the Company entered into Promissory Note Agreements with three accredited investors. CoolTech received $125,000 in financing and promised to pay the principal amount together with simple interest of 15% per annum. Furthermore, the Company committed to pay the principal amount and accrued interest within 30 days of the receipt of funds from debt or surety bond financing. In exchange, the Company granted a security interest in all of the Company’s intellectual property as collateral and CoolTech issued cashless warrants to purchase 1,000,000 shares of common stock at an exercise price of $0.05. The warrants expire after five years.

On September 25, 2018, the Company entered into Promissory Note Agreements with an accredited investor. CoolTech received $125,000 in financing and promised to pay the principal amount together with simple interest of 15% per annum on or before the one-year anniversary. Furthermore, the Company committed to pay the principal amount and accrued interest within 30 days of the receipt of funds from debt or surety bond financing. In exchange, the Company granted a security interest in all of the Company’s intellectual property as collateral and CoolTech issued cashless warrants to purchase 1,000,000 shares of common stock at an exercise price of $0.05. The warrants expire after five years. On March 16, 2020, the investor signed an amendment to the agreement extending the maturity date until April 30, 2020. As of the filing date, the Company has not received a notice of default.

On October 2, 2018, the Company entered into a Promissory Note Agreement with an accredited investor. It received $250,000 in financing and promised to pay the principal amount together with simple interest of 15% per annum. Furthermore, the Company committed to pay the principal amount and accrued interest within 30 days of the receipt of funds from debt or surety bond financing. In exchange, the Company granted a security interest in all of the Company’s intellectual property as collateral and Cool Technologies issued cashless warrants to purchase 2,000,000 shares of common stock at an exercise price of $0.05. The warrants expire after five years.

On October 26, 2018, the Company entered into a Promissory Note Agreement with an accredited investor. It received $250,000 in financing and promised to pay the principal amount together with simple interest of 15% per annum on or before the one-year anniversary. Furthermore, the Company committed to pay the principal amount and accrued interest within 30 days of the receipt of funds from debt or surety bond financing. In exchange, the Company granted a security interest in all of the Company’s intellectual property as collateral and Cool Technologies issued cashless warrants to purchase 2,000,000 shares of common stock at an exercise price of $0.05. The warrants expire after five years. On October 26, 2019, the Company and the investor signed an amendment to the agreement extending the maturity date for seven months. On November 20, 2020, they signed another amendment to the agreement in which they agreed that in the event there are any amounts outstanding under the Note on January 1, 2021, the investor shall be able to convert, any amounts outstanding under the Note into shares of common stock, at a conversion price of seventy one percent of the lowest Volume Weighted Average Price (VWAP) over the previous ten trading days prior to the delivery of a conversion notice. On January 20, 2021, the Company issued 15,000,000shares of common stock to LGH Investments, LLC upon partial conversion of $137,385 on convertible debt and interest of $333,938. On January 22, 2021, the Company issued 15,000,000 shares of common stock to LGH Investments, LLC upon partial conversion of $137,385 on convertible debt and interest of $333,938. On February 3, 2021, the Company issued 2,653,125 shares of common stock to LGH Investments, LLC upon final conversion of $38,205 (minus an adjustment of $20,963 for a previous conversion overage) on convertible debt and interest of $333,938.

On December 19, 2018, the Company entered into a Promissory Note Agreement with an accredited investor. It received $50,000 in financing and promised to pay the principal amount together with simple interest of 15% per annum. Furthermore, the Company committed to pay the principal amount and accrued interest within 30 days of the receipt of funds from debt or surety bond financing. In exchange, the Company granted a security interest in all of the Company’s intellectual property as collateral and Cool Technologies issued cashless warrants to purchase 400,000 shares of common stock at an exercise price of $0.05. The warrants expire after five years.

On March 13, 2019, the Company and a vendor agreed to convert an overdue $25,000 account payable into a Promissory Note Agreement. CoolTech promised to pay the principal amount together with simple interest of 15% per annum. Furthermore, the Company committed to pay the principal amount and accrued interest within 30 days of the receipt of funds from debt or surety bond financing. In exchange, the Company granted a security interest in all of the Company’s intellectual property as collateral and CoolTech issued cashless warrants to purchase 200,000 shares of common stock at an exercise price of $0.05. The warrants expire after five years.

On March 18, 2019, the Company entered into a Promissory Note Agreement with an accredited investor. It received $250,000 in financing and promised to pay the principal amount together with simple interest of 15% per annum on or before the one-year anniversary. Furthermore, the Company committed to pay the principal amount and accrued interest within 30 days of the receipt of funds from debt or surety bond financing. In exchange, the Company granted a security interest in all of the Company’s intellectual property and CoolTech issued cashless warrants to purchase 2,000,000 shares of common stock at an exercise price of $0.05. The warrants expire after five years. On March 19, 2020, the Company defaulted on the note payable. The principal and interest as of May 19, 2020, total $317,038. As of the filing date, the Company has not received a notice of default for the note. As per the terms of the note, interest will continue to accrue at 15% per annum until paid in full.

On March 19, 2019, the Company entered into a Promissory Note Agreement with an accredited investor. It received $250,000 in financing and promised to pay the principal amount together with simple interest of 15% per annum on or before the one-year anniversary. Furthermore, the Company committed to pay the principal amount and accrued interest within 30 days of the receipt of funds from debt or surety bond financing. In exchange, the Company granted a security interest in all of the Company’s intellectual property and CoolTech issued cashless warrants to purchase 2,000,000 shares of common stock at an exercise price of $0.05. The warrants expire after five years. On March 19, 2020, the investor signed an amendment to the agreement extending the maturity date for four months. As of the filing date, the Company has not received a notice of default.

On January 31, 2020, the Company entered into a Promissory Note Agreement with an accredited investor. It received $36,000 in financing and promised to pay the principal amount together with simple interest of 3% per annum. Furthermore, the Company issued cashless warrants to purchase 4,000,000 shares of common stock at an exercise price of $0.005. The warrants expire after five years.

On May 4, 2020, the Company received loan proceeds of $52,612 (the “PPP Loan”) under the Paycheck Protection Program (“PPP” under the Coronavirus Aid, Relief and Economic Security Act).

The PPP Loan is evidenced by a promissory note (the “Note”) between the Company and Small Business Administration (the “Lender”). The Note has a two-year term, bears interest at the rate of 1.00% per annum, and may be prepaid at any time without payment of any premium. No collateral or guarantees were provided in connection with the PPP Notes. No payments of principal or interest are due during the six-month period beginning on the date of the Note (the “Deferral Period”).

The principal and accrued interest under the Note is forgivable after eight weeks if the Company uses the PPP Loan proceeds for eligible purposes, including payroll, benefits, rent and utilities, and otherwise complies with PPP requirements. In order to obtain forgiveness of the PPP Loan, the Company submitted a request and provided documentation regarding its compliance with applicable requirements. If and when the loan is forgiven, the principal and interest will be removed from the Company’s books. If forgiveness is not granted, the Company must repay any unforgiven principal amount of the Note, with interest, on a monthly basis following the Deferral Period. No assurance can be provided that forgiveness for all or any portion of the PPP Loan will be obtained.

The Note contains customary events of default relating to, among other things, payment defaults and breaches of representations, warranties or covenants. The occurrence of an event of default may result in the repayment of all amounts outstanding, collection of all amounts owing from the Company, or filing suit and obtaining judgment against the Company.

On June 29, 2020, the Company entered into a Promissory Note Agreement with an accredited investor. It received $85,000 in financing and promised to pay the principal amount together with interest of $10,000 by July 29, 2020. As additional compensation, the investor received cashless warrants to purchase 1,000,000 shares of common stock at an exercise price of $0.05. The warrants expire after five years. In the event of a default, the investor may, upon written notice to the Company, declare all unpaid principal and interest immediately due and payable. As of the filing date, the Company has not received a notice of default.

Convertible notes payable

September Convertible Note -- On September 15, 2020, the Company signed a promissory note agreement with an accredited investor. It issued 1,000,000 inducement shares of restricted common stock and received $60,000 after an original issue discount of $6,000. The total amount of 66000 plus 3% interest or $1,980 will be due on April 15, 2021. After 180 days, at the holder’s option, a portion or all of the unpaid principal and interest may be converted into shares of common stock at a 29% discount to the lowest VWAP during the 10 trading days preceding the conversion date. In the event of default, the outstanding balance will increase by 25% and a daily penalty of $100 will accrue until the default is remedied. On March 17, 2021, Cool Technologies issued 3,468,367 shares of common stock to LGH Investments, LLC upon conversion of $67,980 and the note was retired.

October Convertible Note -- On October 8, 2020, the Company signed a promissory note agreement with an accredited investor. It issued 1,000,000 inducement shares of restricted common stock and received $58,000 after an original issue discount of $6,000 and payment of $2,000 in legal fees. The total amount of $66,000 will be due on October 8, 2021. After 180 days, at the holder’s option, a portion or all of the unpaid principal and interest may be converted into shares of common stock at a 29% discount to the lowest VWAP during the 10 trading days preceding the conversion date. In the event of default, the outstanding balance will increase by 25% and the interest rate will increase to 18% until the default is remedied. On April 23, 2021, Cool Technologies issued 911,197 shares of common stock to JSJ Investments, Inc. upon partial conversion of $35,000. On April 27, 2021, Cool Technologies issued 880,675 shares of common stock to JSJ Investments, Inc. upon conversion of $33,828 and the note was retired.

October Convertible Note -- On October 30, 2020, the Company signed a promissory note agreement with an accredited investor. It issued 1,500,000 inducement shares of restricted common stock as additional consideration and received $45,000 after an original issue discount of $5,000. The total amount of $50,000 plus 3% interest or $1,500 will be due on May 30, 2021. After 180 days, at the holder’s option, a portion or all of the unpaid principal and interest may be converted into shares of common stock at a conversion price of $0.01. In the event of default, the outstanding balance will increase by 25% and a daily penalty of $100 will accrue until the default is remedied. On May 3, 2021, Cool Technologies issued 5,150,000 shares of common stock to LGH Investments, LLC upon conversion of $51,500 and the note was retired.

November Convertible Note -- On November 18, 2020, the Company signed a promissory note agreement with an accredited investor. It received $130,000 after an original issue discount of $7,000. The total amount of $137,000 will be due on November 18, 2021. After 180 days, at the holder’s option, a portion or all of the unpaid principal and interest may be converted into shares of common stock at a 29% discount to the lowest VWAP during the 10 trading days preceding the conversion date. In the event of default, the outstanding balance will increase by 50% and the interest rate will increase to 22% until the default is remedied. On May 24, 2021, Cool Technologies issued 1,798,561 shares of common stock to LGH Investments, LLC upon partial conversion of $75,000. On May 25, 2021, Cool Technologies issued 1,723,077 shares of common stock to LGH Investments, LLC upon conversion of $67,200 and the note was retired.

January Convertible Note -- On January 18, 2021, the Company entered into a convertible note agreement with an accredited investor. It issued 2,000,000 inducement shares of restricted common stock and received $120,000 after an original issue discount of $12,000 in lieu of interest. The total amount of $132,000 plus 3% interest or $3,960 will be due on October 18, 2021. After 180 days, at the holder’s option, a portion or all of the unpaid principal and interest may be converted into shares of common stock at a fixed price of $0.02 per share. In the event of default, the outstanding balance will increase by 25% and a daily penalty of $100 will accrue until the default is remedied. As of June 30, 2021, the remaining balance totaled $135,960.

February Convertible Note -- On February 4, 2021, the Company signed a promissory note agreement with an accredited investor. It received $70,000 after an original issue discount of $4,000 and reimbursement of $3,000 to cover the investor’s legal fees. The total amount of $77,000 will be due on February 4, 2022.After 180 days, at the holder’s option, a portion or all of the unpaid principal and interest may be converted into shares of common stock at a 29% discount to the lowest VWAP during the 10 trading days preceding the conversion date. In the event of default, the outstanding balance will increase by 50% and the interest rate will increase to 22% until the default is remedied. As of June 30, 2021, the remaining balance totaled $79,464.

February Convertible Note -- On February 25, 2021, the Company entered into a convertible note agreement with an accredited investor. It issued 2,000,000 inducement shares of restricted common stock and received $150,000 after an original issue discount of $15,000 in lieu of interest. The total amount of $165,000 plus 3% interest or $4,950 will be due on November 25, 2021. After 180 days, at the holder’s option, a portion or all of the unpaid principal and interest may be converted into shares of common stock at a fixed price of $0.025 per share. In the event of default, the outstanding balance will increase by 25% and a daily penalty of $100 will accrue until the default is remedied. As of June 30, 2021, the remaining balance totaled $169,950.

March Convertible Note -- On March 12, 2021, the Company signed a promissory note agreement with an accredited investor. It received $65,000 after an original issue discount of $3,700 and reimbursement of $3,000 to cover the investor’s legal fees. The total amount of $71,700 will be due on March 12, 2022. After 180 days, at the holder’s option, a portion or all of the unpaid principal and interest may be converted into shares of common stock at a 29% discount to the lowest VWAP during the 10 trading days preceding the conversion date. In the event of default, the outstanding balance will increase by 50% and the interest rate will increase to 22% until the default is remedied. As of June 30, 2021, the remaining balance totaled $73,444.

March Convertible Note -- On March 24, 2021, the Company entered into a convertible note agreement with an accredited investor. It issued two sets of commitment shares: a block of 500,000 and a block of 2,500,000 shares of restricted common stock as well as warrants to purchase 1,000,000 shares of common stock at an exercise price of $0.10 per share. In return, the Company received $250,000 after an original issue discount of $25,000 in lieu of interest. The total amount of $275,000 plus 8% interest or $22,000 will be due on December 24, 2021. After 60 days, if the note has not been paid in full, the investor will have the right to purchase up to 6 million additional warrant shares. After 180 days, at the holder’s option, a portion or all of the unpaid principal and interest may be converted into shares of common stock at a fixed price of $0.055 per share.If the note is repaid by the maturity date, the investor will forfeit the block of 2,500,000 shares of restricted common stock and the shares will be returned to the Company’s treasury. In the event of default, the outstanding balance will increase by 25% and a daily penalty of $1,000 will accrue until the default is remedied. As of June 30, 2021, the remaining balance totaled $297,000.

March Convertible Note -- On March 24, 2021, the Company entered into a convertible note agreement with an accredited investor. It issued two sets of commitment shares: a block of 500,000 and a block of 2,500,000 shares of restricted common stock as well as warrants to purchase 1,000,000 shares of common stock at an exercise price of $0.10 per share. In return, the Company received $750,000 after an original issue discount of $75,000 in lieu of interest. The total amount of $825,000 plus 8% interest or $66,000 will be due on December 24, 2021. After 60 days, if the note has not been paid in full, the investor will have the right to purchase up to 2 million additional warrant shares. After 180 days, at the holder’s option, a portion or all of the unpaid principal and interest may be converted into shares of common stock at a fixed price of $0.055 per share. If the note is repaid by the maturity date, the investor will forfeit the block of 2,500,000 shares of restricted common stock and the shares will be returned to the Company’s treasury. In the event of default, the outstanding balance will increase by 25% and a daily penalty of $1,000 will accrue until the default is remedied. As of June 30, 2021, the remaining balance totaled $891,000.

Test Vehicle Financing

In July 2018, CoolTech traded-in one test vehicle and purchased another bearing an interest rate of 9.92% payable monthly over 6 years.

In June 2019, the Company entered into two finance agreements for the purchase of two test vehicles bearing an interest rate of 9.92% payable monthly over a 5-year period.

Note payable – UPT minority owner

A promissory note is held by the 5% minority owner of UPT. The terms of the note have not been finalized.

Warrants Issued with Debt

When the Company issues notes payable, it may also be required to issue warrants.

Transactions with Related Parties

The related party advances, in the amount of $48,537 at June 30, 2021 and $49,887 at December 31, 2020, are held by two of the Company’s officers and relate to unreimbursed expenses which carry no interest and are due on demand.

The note payable - UPT minority owner, in the amount of $110,000 at June 30, 2021 and December 31, 2020, is held by the 5% minority owner of UPT. The terms of the note have not been finalized.

Future contractual maturities of debt are as follows:

Note 4 – Derivative Liability

Under the terms of the October 8, 2020, November 18, 2020, February 4, 2021, and March 12, 2021 Convertible Notes, the Company identified derivative instruments arising from embedded conversion features.

The following summarizes the Black-Scholes assumptions used to estimate the fair value of the derivative liability at the dates of issuance and the revaluation dates:

Changes in the derivative liability were as follows:

Note 5 – Commitments and Contingencies

Securities and Exchange Commission Settlement

On September 20, 2018, the SEC approved an offer to settle the enforcement proceedings against the Company pursuant to Section 21C of the Securities Exchange Act of 1934.

These proceedings arose out of the violation of the Regulation S-X requirement that interim financial statements filed as part of a Form 10-Q be reviewed by an independent public accounting firm prior to filing.

On three occasions, specifically, May 20, 2013, August 19, 2013, and August 22, 2016, Cool Technologies filed Form 10-Qs that contained financial statements that were not reviewed by an independent public accounting firm. In two cases, the Company properly disclosed that the 10Q’s were “unaudited and unreviewed” as set forth by the guidance in the Division of Corporation Finance Financial Reporting Manual Section 4410.3 and in each case, the Company subsequently filed a restated and amended Form 10-Q/A that complied with the Interim Review Requirement. In no instance were the filings ever subjected to audit challenge.

Pursuant to the enforcement proceeding instituted by the SEC, the Company settled for a fine of $75,000 and agreed to cease and desist from any future violations of Sections 13(a) of the Exchange Act and Rule 13a-13 thereunder, and Rule 8-03 of Regulation S-X. As of the date of this filing, the Company still owes the SEC $50,000, which is included within accounts payable on the consolidated balance sheets.

Cool Technologies’ subsidiary Ultimate Power Truck, LLC (“UPT”) is in pending litigation (PGC Investments, LLC, et al. v. Ultimate Power Truck, LLC, in the Circuit Court for the Sixth Judicial Circuit, Pinellas County, Florida). The litigation is a commercial landlord-tenant action wherein the Plaintiffs seek damages for nonpayment of rent arising out of a commercial lease agreement for which UPT was the tenant. The plaintiffs claim that UPT did not pay approximately $80,000 during the lease term. UPT is contesting the damages claim because it has paid the rent the plaintiff claims it owes. The matter is still in its initial stages. No amounts have been recorded as loss contingencies. No discovery has been conducted and there is no trial date. The plaintiffs are attempting to name Cool Technologies as a defendant. That matter is set for hearing on September 21, 2021.

There is also a potential arbitration claim by PGC Investments, LLC against Cool Technologies seeking damages in the amount of $360,500 for breach of contract and breach of the implied covenant of good faith and fair dealing. The Company vigorously disputes that and believes it has the documentation and evidence to prevail.

From time to time, the Company may be a party to other legal proceedings. Management currently believes that the ultimate resolution of these other matters, if any, will not have a material adverse effect on the consolidated results of operations, financial position, or cash flow.

Note 6 – Equity

Preferred Stock

Cool Technologies has 15,000,000 preferred shares authorized and 3 Series A and 2,727,270 Series B preferred shares issued and outstanding as of June 30, 2021.

On August 12, 2016, the Company entered into a Securities Purchase Agreement with four accredited investors pursuant to which it sold 3,636,360 shares of the Company’s Series B Convertible Preferred Stock. Each share of the preferred stock is convertible into one share of the Company’s common stock. The conversion price of the preferred stock is equal to the $0.055.

In addition to the preferred stock, the Securities Purchase Agreement included warrants to purchase 3,636,360 shares of the Company’s common stock at an exercise price of $0.07 per share. The warrants cannot be exercised on a cashless basis. The aggregate purchase price of the preferred stock and warrants was $200,000, of which $150,000 was paid in cash and $50,000 was paid in services.

In connection with the sale of the Preferred Stock, on October 20, 2016, the Company filed with the Secretary of the State of Nevada, an amended Certificate of Designations of the Rights, Preferences, Privileges and Restrictions, which have not been set forth in the Certificate of Designation of the Series B Convertible Preferred Stock nor the first Amendment to Certificate of Designation filed on August 12, 2016.

The preferred stock has the same rights as if each share of Series B Convertible Preferred Stock were converted into one share of common stock. For so long as the Series B Convertible Preferred Stock is issued and outstanding, the holders of such Series B Convertible Preferred Stock vote together as a single class with the holders of the common stock and the holders of any other class or series of shares entitled to vote with the common stock, with the holders of Series B Stock being entitled to 66 2/3% of the total votes on all such matters. 

In the event of the death of a holder of the Class B Preferred Stock, or a liquidation, winding up or bankruptcy of a holder which is an entity, all voting rights of the Class B Preferred Stock shall cease.

The holder of any shares of Class B Preferred Stock have the right to convert their shares into common stock at any time, in a conversion ratio of one share of common stock for each share of Class B Preferred. If the Company’s common stock trades or is quoted at a price per share in excess of $2.25 for any twenty consecutive day trading period, the Class B Preferred Stock will automatically be convertible into the common stock of the Company in a conversion ratio of one share of common stock for each share of Class B Preferred.

The holders of Class B Preferred Stock are not entitled to receive any distributions in the event of any liquidation, dissolution or winding up of the Company.

The warrants cannot be exercised on a cashless basis.

Preferred stock issuable on the consolidated balance sheets represents preferred stock to be issued for either cash received, or services performed. As of June 30, 2021 and December 31, 2020 the number of shares of preferred stock to be issued was 0 and the number of shares of Series B preferred stock was 2,727,270.

On January 25, 2019, Spirit Bear, Ltd. converted their remaining 17 shares of Series A preferred stock into 850,000 shares of common stock. KHIC, Inc., a related party holds the remaining 3 shares of Series A Preferred Stock. Each share of Series A Preferred Stock (“Preferred Stock”) is convertible into 50,000 shares of common stock. Each share of preferred stock has voting rights as if they were converted into 50,000 shares of common stock. The holders of each share of preferred stock then outstanding shall be entitled to be paid out of the Available Funds and Assets (as defined in the “Certificate of Designation”), and prior and in preference to any payment or distribution (or any setting a part of any payment or distribution) of any Available Funds and Assets on any shares of common stock, an amount per preferred share equal to the Preferred Stock Liquidation Price ($2,500 per share).

Common Stock

On February 13, 2020, stockholders holding shares that entitled them to exercise at least a majority of the voting power, voted in favor of increasing the number of authorized shares of common stock, from 500,000,000 shares to 1,000,000,000 shares.

Common stock issuable on the consolidated balance sheets represents common stock to be issued for either cash received, or services performed. As of June 30, 2021 and December 31, 2020, the number of shares of common stock to be issued was 494,697 shares.

Common stock warrants issued with the sale of common stock

When the Company sells shares of its common stock the buyer also typically receives fully vested common stock warrants with a maximum contractual term of 3-5 years. A summary of common stock warrants issued with the sale of common stock as of June 30, 2021, and changes during the period then ended is presented below:

Note 7 – Share-based payments

Nonemployee common stock warrants -- Fully-vested upon issuance

Cool Technologies may issue fully vested common stock warrants with a maximum contractual term of 5 years to non-employees in return for services or to satisfy liabilities, such as accrued interest. The following summarizes the activity for common stock warrants that were fully vested upon issuance:

Note 8 – Net Loss per Share

Basic net loss per share is computed by dividing net loss by the weighted-average number of common shares outstanding during the reporting period. Diluted net loss per share is computed similarly to basic loss per share, except that it includes the potential dilution that could occur if dilutive securities are exercised.

The following table presents a reconciliation of the denominators used in the computation of net loss per share – basic and diluted:

Outstanding stock options and common stock warrants are considered anti-dilutive because the Company is in a net loss position. The following summarizes equity instruments that may, in the future, have a dilutive effect on earnings per share:

Note 9 – Subsequent Events

On August 10, 2021, the Company issued 1,108,647 shares of common stock to Power Up Lending Group, Ltd. upon partial conversion of $50,000 on principal of $77,000.

On August 11, 2021, the Company issued 765,217 shares of common stock to Power Up Lending Group, Ltd. upon final conversion of $29,920 on principal of $77,000.

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Overview

Cool Technologies, Inc. and subsidiary, (“the Company” or “Cool Technologies” or “CoolTech”) was incorporated in the State of Nevada in July 2002. In April 2014, CoolTech formed Ultimate Power Truck, LLC (“Ultimate Power Truck” or “UPT”), of which the Company owns 95% and a shareholder of Cool Technologies owns 5%. Cool Technologies was formerly known as Bibb Corporation, as Z3 Enterprises, and as HPEV, Inc. On August 20, 2015, the Company changed its name to Cool Technologies, Inc.

The Company’s technologies are divided into two distinct but complementary categories: mobile power generation and heat dispersion technology.

The Company has developed a mobile power generation system (MG) that enables work trucks to generate electric power by running an in-chassis generator. The MG system can be manufactured into or retrofitted onto new and existing global truck platforms. CoolTech intends to market and sell the mobile power generation systems to government, commercial and fleet vehicle owners as well as original equipment manufacturers and individual users. Sales are expected to occur through the direct efforts of the Company, its sales agents and its joint venture partners. CoolTech may also license the MG system as well.

The markets targeted include consumer, agricultural, industrial, military and emergency responders, both in the U.S. and worldwide.

CoolTech has also developed heat dispersion technologies based on proprietary composite heat structures and heat pipe architecture in various product platforms such as electric motors, pumps, turbines, bearings and vehicle components. In preparation, Cool Technologies filed for and received a trademark for Totally Enclosed Heat Pipe Cooled: TEHPC.

When a generator is enhanced by CoolTech’s patented thermal technologies, it should be able to output more power than any other generator of its size on the market. That’s because third party testing has demonstrated that the cooling provided by the thermal technologies can help increase the efficiency of electric motors.

Furthermore, management believes that the technologies will increase the lifespan as well as help meet regulatory emissions standards for electric motors and other heat producing equipment and components. The simplicity of the heat pipe architecture as well as the fact that it provides effective new applications for existing manufacturing processes should enhance the cost structure in several large industries including motor/generator and engine manufacturing.

As of June 30, 2021, we have seven US patents, one Canadian patent, two granted patents (1 Mexican, 1 Canadian) and two pending applications (1 in the US, 1 in Brazil) covering composite heat structures, motors, and related structures, heat pipe architecture, and applications (commonly referred to as “thermal” or “heat dispersion technology”). We also have one Patent Cooperation Treaty (“PCT”) application pending that covers integrated electrical power generation methods and systems.

The Company intends to commercialize its patents by integrating the thermal technologies and applications with Original Equipment Manufacturer (OEM) partners and by licensing them to electric motor, generator, pump and vehicle component (brake, resistor, caliper) manufacturers.

We believe the benefits of our mobile power generation systems are quickly realized once potential customers see it in operation. Public demonstrations of the MG systems began in April 2017. An inspection and performance demonstration for Mexican government officials and business leaders occurred in May 2018. Feedback from initial viewers resulted in more government officials and fruit growers coming to see the MG power equipment and to learn about the water purification options in March 2019. Even more officials and growers followed -- flying to St. Louis for a review in May 2019.

We generated our first Mobile Generation order during the quarter ended June 30, 2014 and received a partial deposit in advance of completing the sale. On June 9, 2017, the Company received a purchase order for 10 MG systems from Craftsmen Industries. As Craftsmen builds custom vehicles designed to the individual specifications of their customers whose businesses and technical requirements vary widely, it is impossible to estimate when the order will be fulfilled.

In November 2017, the Company received a purchase commitment for 234 MG systems from a Mexican Producers’ Union. That was followed by a purchase commitment for 24 to 50 MG units from a second Mexican Producers’ Union in December 2017. On April 9, 2018, the first Mexican Producers’ Union executed a purchase order with the Company for 10 Ford F350s with MG80 kVA systems installed. On May 7, 2019, Turkish technology company Belirti Teknoloji, A.S. delivered a purchase order for six hundred MG80, MG125 and MG200 Mobile Generation systems. As of the June 30, 2021, the Company does not have the funds available to fulfill the orders. To address the issue, the Company is working to close on non-dilutive funding, however, there can be no assurance that its efforts will be successful.

Craftsmen Industries was selected to produce the first systems due to its engineering capabilities and extensive facilities. In January 2019, it began production on the initial vehicles and completed an initial production run vehicle two months later.

We have not generated any revenues to date. Consequently, there can be no assurances that the Company will be able to generate new orders, nor fulfill the existing ones, nor address all the requirements of all the interested parties.

Management is pursuing various financing alternatives, based upon a third-party assessment of the historically demonstrated or contractually committed profit-earning capacities of our IP. We see this as the best path forward for non-dilutive funding. To that end, the Company signed a Memorandum of Terms for Debt Financing with 3&1 Capital Partners, LLC (“3&1”) in March of 2020. Five months later, the Company signed an agreement in which 3&1 agreed to definitively provide insurance related debt, surety bond financing and/or standby letter of credit financing as per the terms of the memorandum.

If funding is received, it will be used to support completion of the initial phases of our business plan, which is to license our thermal technologies and applications; to license or sell a mobile electric power system; and to license our submersible motor dry pit technologies and/or to bring to market our technologies and applications through key distribution and joint venture partners.

The occurrence of an uncontrollable event such as the COVID19 pandemic has negatively affected our operations. A pandemic typically results in social distancing, travel bans and quarantine. This has limited access to our facilities, customers, management, support staff and professional advisors. These, in turn, have impacted our operations and financial condition. The virus and its variants may also impact demand for our products and may continue to hamper our efforts to provide our investors with timely information and comply with our filing obligations with the Securities and Exchange Commission.

Recent Developments

Amendment of Series B Preferred Stock

On October 31, 2016, the Company filed an amended and restated Series B Preferred Stock Certificate of Designation (which was originally filed with the Secretary of State of Nevada on April 19, 2016 and amended on August 12, 2016) to designate 3,636,360 shares as Series B Preferred Stock and to provide for supermajority 66 2/3% voting rights for the Series B Preferred Stock. The Series B Preferred Stock will not bear dividends, will not be entitled to receive any distributions in the event of any liquidation, dissolution or winding up of the Company, and will have no other preferences, rights, restrictions, or qualifications, except as otherwise provided by law or the articles of incorporation of the Company. The holders of Class B Stock shall have the right, at such holder’s option, at any time to convert such shares into common stock, in a conversion ratio of one share of common stock for each share of Class B Stock. If the common stock trades or is quoted at a price per share in excess of $2.25 for any twenty consecutive day trading period, (subject to appropriate adjustment for forward or reverse stock splits, recapitalizations, stock dividends and the like), the Series B Stock will automatically be convertible into the common stock in a conversion ratio of one share of common stock for each share of Series B Stock. The Series B Stock may not be sold, hypothecated, transferred, assigned or disposed without the prior written consent of the Company and the holders of the outstanding Series B Preferred Stock.

Amendment of Articles of Incorporation

On August 10, 2020, the Nevada Secretary of State accepted and filed the Company’s Certificate of Amendment to the Company’s Articles of Incorporation. The filing amends Article II of the Articles of Incorporation by increasing the number of authorized shares of common stock from 500,000,000 to 1,000,000,000.

Craftsmen Industries, Inc.

As a consequence of the first public demonstration of the MG 30 kilovolt amp (“kVA”) system at the North America International Auto Show in Detroit in January 2017, the Company entered into an agreement in principle, dated February 21, 2017, with Craftsmen Industries, Inc.(“Craftsmen’), a company engaged in the design, engineering and production of mobile marketing vehicles, experiential marketing platforms and industrial mobile solutions.

On April 25, 2017, we delivered to Craftsmen Industries, a Class III Vehicle (Ford F-350 dually) up-fitted with a production-ready MG 30 kVA (single phase/three phase) system.

Subsequently, Craftsmen invited the Company to demonstrate its mobile generation technology and the potential benefits for Craftsmen products at Craftsmen’s 35^th Anniversary Party on April 27, 2017. Over 100 current and prospective Craftsmen customers were in the audience for the demonstrations.

Since then the business relationship has expanded significantly. On June 9, 2017, the Company received a purchase order for 10 MG systems from Craftsmen and Craftsmen agreed to produce the MG systems for the Company’s initial orders from two Mexican Producers Unions. In October 2018 we began ordering components for the initial pilot production run which was completed in the first quarter of 2019 and showcased on March 27, 2019. In parallel, purchase orders were placed for components to support increased production upon receipt of funding.

Craftsmen recently signed a manufacturing contract with Translux-Fair Play. Translux’ Hazelwood, Missouri facility encompasses over 45,000 square feet of manufacturing space and offers extensive laser cutting and metal bending machinery. The contract significantly enhances Craftsmen’s capabilities to produce boxes and control panels for the MG Systems and the vehicles they’re upfitted to, but also all the MG’s optional tasks and capabilities, including welding, water purification and solar power.

Not only will basic production be optimized and improved, but control panels and displays should be upgraded. CoolTech is expected to benefit from Translux’ electronics expertise which has been refined through their years of manufacturing digital scoring panels for sporting arenas and ball parks.

Order of Parts and Components

On July 15, 2018, the Company purchased a Ford F-450 Chassis Cab Truck. Subsequently, a metal flatbed was manufactured and installed. The truck was delivered to Craftsmen on September 15^th. It will be used for the installation and refinement of the MG 80 kVA system. A second F-450 will be used for the MG 125 kVA system.

During the week of October 7, 2018, the Company placed orders for System Controllers, 80 and 125 kVA Generators, Voltage Regulators, Panasonic Toughpads, Power Take-Offs (PTO) and Split Shaft PTOs.

As of June 2021, the Company has acquired enough parts and components to build 5 MG 80s and 2 MG 125s. It is currently procuring two mobile water purification systems and components for mobile electric vehicle charging systems.

In addition, the Company has purchased another Ford F-450 and is seeking to acquire more F-450s and 550s for use in demonstrations of the capabilities noted above and for initial order fulfillment.

Aon Risk Services Central, Inc and Lee and Hayes, PLLC

On January 18, 2018, the Company entered into an agreement with Aon Risk Services Central, Inc., Lee, and Hayes, PLLC, through its operating unit, 601West, which provides intellectual property (“IP”) analytics, to assess the value of the Company’s IP. As set forth in the agreement, the assessment will be founded on historically demonstrated or contractually committed profit-earning capacities of our IP and may be used to obtain financing, including but not limited to, non-dilutive financing. Since then considerable progress has been achieved, although at a pace much slower than anticipated.

Live MG80 Demonstration in Fort Collins, Colorado

On May 4, 2018, nine representatives from Mexico’s farming, banking, and government sectors flew to Fort Collins, Colorado for a live demonstration of CoolTech’s generator-equipped truck. The demonstration showcased the capabilities and ease of operation of the system. The Company demonstrated how an operator is able to control the generator from the comfort and safety of the truck’s cab using a Panasonic Toughpad. The Company also used the electricity from the truck to power a screw compressor, an industrial fan, and an industrial load bank. Additional capabilities, such as purifying water and using batteries and solar power to make operations more sustainable and environmentally friendly were discussed with the attendees.

A representative of the National Union of Jatropha Producers approved the generator-equipped truck. CoolTech plans to put this into production as soon as final funding is secured.

Unveiling of Initial Production Run Vehicle

On March 27, 2019, the Company unveiled the initial production run of its Mobile Generation (MG) work trucks for inspection by an audience of agricultural and community leaders from Latin America at Craftsmen Industries. The itinerary for the showcase event included a tour of the St. Louis manufacturing facility and inspection of the first production run MG vehicle in operation as it powered a variety of equipment.

The purpose of the viewing was not only to show the truck’s capabilities, but to get feedback from the attendees.

Mexican Government

On May 13, 2019, government officials and fruit growers were at Craftsmen Industries in St. Louis for a review of a first run MG80 production vehicle and water purification/desalination options.

Among the politicians in attendance was Congressman Efraín Rocha Vega who is Secretary of the Commission of Development and Rural, Agricultural and Food Self-sufficiency Conservation, a member of the commission of Livestock and the commission of Environment, Sustainability, Climate Change and Natural Resources. Subsequent to the event, in an official Congressional Letter of Support, dated May 20, 2019, Congressman Rocha wrote: “The successful demonstration of these technologies further strengthens the Mexican Government’s support of Mexican entities that desire to purchase CoolTech products, as well as affirms our position to provide financial assistance to such entities.” The letter can be viewed in its entirety at: http://www.cooltechnologiesinc.com/content/pdf/MexicanLegislationandFinancialAssistanceLetter.pdf.

Introduction of new options

During the fourth quarter of 2019, the Company has introduced new options, which include an MG System that generates up to 200 kVA of electric power, water purification and desalination systems.

The truck mounted water purification and desalination units can produce from 2,800 to 14,000 gallons of fresh water every day. Assuming the average person needs 2 liters per day, 10,000 gallons is enough for 26,498 people.

A 30 kVA MG system could power any size unit as well as the pumps to deliver the water or five units at once which would conceivably be enough to keep the population of Santa Barbara hydrated. It could even tow a 1,250 gallon water tanker, if needed.

The purification and desalinization units feature fully automated controls and monitoring. When combined with the optional telematics offered in the vehicles, each unit could be remotely controlled and monitored from distant locations.

Belirti Teknoloji

On May 7, 2019, the Company entered into a joint venture agreement (“JV”) with Turkish technology company Belirti Teknoloji, A.S. (“BelirtiTech”). To launch the business, BelirtiTech awarded Cool Technologies a purchase order for up to $42 million USD for the purchase of several different models of its Mobile Generation kits. The purchase order will supply the JV with its initial inventory for resale into the Middle East and some African nations. The Company is actively working with the customer’s bank in addition to insurance companies and other financial entities to facilitate the financing of the orders. As of the date of this filing, the funds to fulfill the orders are not in place.

The initial purchase order is for six hundred MG80, MG125 and MG200 Mobile Generation systems. The MG systems will be integrated into the end customer’s choice of vehicles.

The order also includes an additional MG80 installed in a Ford F-450 with the 2,500 gallon per day mobile water desalinization option included.

KeyOptions

On May 30, 2019, the Company entered into a joint venture agreement (“JV”) with KeyOptions Pty Ltd., a privately held technology and security provider based in Victoria, Australia.

KeyOptions develops and markets products for governments, defense contractors and other commercial applications to counter security and cyber threats. The Company will provide a license for the JV to market and sell CoolTech’s entire product platform in Australia and neighboring countries in Southeast Asia.

New Strategic Alliance

On December 16, 2019, the Company signed a cross marketing and licensing agreement with VerdeWatts, LLC., an energy generation and storage company encompassing everything from mobile solar power generation systems to large scale biogas turbine installations. Pursuant to the agreement VerdeWatts and the Company each granted the other a royalty free non-exclusive license to certain patents which license is subject to certain future negotiation.

Like CoolTech’s Mobile Generation systems (“MG”), VerdeWatts’ products are scalable and offer the ability to bring power nearly anywhere it is needed. Their proprietary Smart Solar Power Generation Units and energy storage systems combine to deliver sustainable power long after the sun has set.

The agreement with VerdeWatts also included a cross marketing and royalty free non-exclusive licensing agreement with FirmGreen, Inc., a water treatment facilities developer that works closely with VerdeWatts to create a suite of synergistic products that address significant needs in the global marketplace. FirmGreen specializes in water purification and desalination technologies. Their mobile, solar and container applications feature 6 levels of water purification for unrivaled drinkability. Pursuant to the agreement FirmGreen and the Company each granted the other a royalty free non-exclusive license to certain patents which license is subject to certain future negotiation.

CoolTech’s MG platform makes the companies’ product offering complete with mobile power generation. It provides the capability to power everything from irrigation for farms and water purification for rural areas to electric vehicle charging and fast charging in the urban ones.

Consider the solar-powered generator system with a built-in water purification unit that makes seawater desalination sustainable. The system pumps and purifies up to 3,000 gallons per day and interfaces with CoolTech’s MG system for 24-hour operation. The solar panels collapse and fold together, so the entire system fits easily in the bed of a work truck. It can be set up and operate anywhere a four-wheel drive vehicle can reach. All of these systems are patent protected and cross licensed to each of the three companies.

FirmGreen and VerdeWatts have a global presence with projects on 3 continents. The largest encompasses the installation of 14 natural gas generators to produce over 60 megawatts (MW) of power. The generators will be integrated with 50 megawatt hours of battery storage and another 6 MW of solar to ensure a consistent flow of power. VerdeWatts intends to replace most of the legacy on-site generators with CoolTech’s MG systems, however the Company has not received any orders and there cannot be any assurance that any orders will be placed.

Together the companies can create an energy or utility ecosystem that can enable less developed countries to leapfrog non-existent, inadequate or failing infrastructure to deliver reliable power and water quickly, sustainably and cost effectively to their citizens, agriculture and other businesses. The scale and impact can reach from the individual farms and villages to cities and regions.

In fact, by combining their respective technologies: energy generation, energy storage and load management controls into a single suite of products, the companies create a “microgrid”. Varying combinations of energy sources such as solar, wind, biogas and MG systems both backup and supplement one another to provide consistent, uninterrupted primary power even during severe weather or other emergency situations.

The synergies between the companies extend beyond water purification and power generation. VerdeWatts’ wind and gas turbines and generators which produce electric power can all be improved by CoolTech’s thermal reduction technologies.

Request for Collaboration Sent to US Government Officials

On December 11, 2019, letters signed by 13 government officials and Congressmen in Mexico were mailed to their counterparts in the US, specifically Governor Gavin Newsom, Secretary Rick Perry, Secretary Wilbur Ross, Senator Mitch McConnell and Speaker of the House Nancy Pelosi.

The letters were a request for collaborative support between the two countries to accelerate CoolTech’s product deployment into Mexico to help solve urgent rural power and water purification problems that are hurting rural communities. Those problems include irregular and faulty power in rural areas which hinders crop irrigation and water pollution which affects crops farmed for sale to the US.

The letters also detail the Mexican officials’ satisfaction with CoolTech’s solutions and management team and that they have met with the Company on several occasions for product demonstrations as well as strategic and technical advice. They highlight the benefits of CoolTech products, how they could quickly and efficiently address the problems noted, and how they expect them to become a viable part of the country’s infrastructure.

Export Import Bank of the United States

With the help of VerdeWatts and FirmGreen, CoolTech has initiated a relationship with the Export-Import Bank of the United States (EXIM), a U.S. government agency whose sole mission is to support U.S. exports. The bank fulfills its mission by offering very cost-effective financing for international customers and project developers to purchase U.S.-made services and purchase or lease U.S.-made goods.

To that end, the two companies applied to finance the Mexican projects referenced above. CoolTech also sent product information for due diligence review by the technical team at EXIM bank. Subsequently, CoolTech has received a Letter of Interest from EXIM, however, there cannot be any assurance that EXIM will provide any funding to the Company.

New Sales Agent

In January 2021, the Company terminated its independent agent agreement with Gaia Energy of Gdansk, Poland.

On January 26, 2021, the Company signed an independent agent agreement with H&K Ventures, LLC of Morganhill, California. H&K will act as the Company’s independent agent.

The principals of H&K were also part of Gaia Energy. Consequently, the agreement and the expertise provide by H&K are essentially the same. H&K will concentrate on developing markets in Eastern Europe, the Middle East and Africa. The agreement describes the agent’s duties as “generating revenue, and investment funding, for the Company from various organizations including investment funds, end-users, channel partners, integrators, and OEMs.” To that end, H&K has requested quotes from the Company for MG 200 to 300 kVA systems with mobile water desalination capabilities of up to 900,000 gallons per day.

Team members of H&K Ventures include executives with more than twenty-five years’ experience with Panasonic, Ford Motor Company, Electronic Data Systems and the US Air Force in the fields of advanced technologies and an African diplomat with a thirty-year background working with and for diplomatic missions, non-governmental organizations and international disasters and aid management services.

The former has joined the Company’s advisory board while the diplomat introduced CoolTech products at a recent African technical summit attended by representatives from 54 countries.

Results of Operations

The following table sets forth, for the periods indicated, consolidated statements of operations data. The table and the discussion below should be read in conjunction with the accompanying consolidated financial statements and the notes thereto, appearing elsewhere in this report.