CPS TECHNOLOGIES CORP/DE/ - Quarter Report: 2007 June (Form 10-Q)

[ ] Transition Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
For the transition period from to

Commission file number 0-16088

(Exact Name of Registrant as Specified in its Charter)

(508) 222-0614
Registrants Telephone Number, including Area Code:

Former Name, Former Address and Former Fiscal Year if Changed since Last Report

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period than the registrant was required to file such reports), and (2) has been subject to the filing requirements for the past 90 days. [X] Yes [ ] No

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer or a non-accelerated filer. See definition of "accelerated filer and large accelerated filer" in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer [ ] Accelerated filer [ ] Non-accelerated filer [X]

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act):
[ ] Yes [X] No

APPLICABLE ONLY TO CORPORATE ISSUERS:

Indicate the number of shares outstanding of each of the issuers classes of common stock, as of the latest practicable date. Number of shares of common stock outstanding as of July 10, 2007: 12,546,959.

See accompanying notes to consolidated financial statements.

See accompanying notes to consolidated financial statements.

See accompanying notes to consolidated financial statements.

See accompanying notes to consolidated financial statements.

CPS Technologies Corporation (the `Company` or `CPS`) (formerly Ceramics Process Systems Corporation) provides advanced material solutions to the electronics, robotics, automotive and other industries.

As permitted by the rules of the Securities and Exchange Commission applicable to quarterly reports on Form 10-Q, these notes are condensed and do not contain all disclosures required by generally accepted accounting principles.

The accompanying financial statements are unaudited. In the opinion of management, the unaudited consolidated financial statements of CPS reflect all normal recurring adjustments which are necessary to present fairly the financial position and results of operations for such periods.

The Company`s balance sheet at December 30, 2006 has been derived from the audited consolidated financial statements at that date, but does not include all of the information and footnotes required by accounting principles generally accepted in the United States of America for complete financial statements.

For further information, refer to the consolidated financial statements and footnotes thereto included in the Registrant`s Annual Report on Form 10-K for the year ended December 30, 2006.

The results of operations for interim periods are not necessarily indicative of the results to be expected for the full year.

Basic net income or net loss per common share is calculated by dividing net income or loss by the weighted average number of common shares outstanding during the period. Diluted net income per common share is calculated by dividing net income by the sum of the weighted average number of common shares plus additional common shares that would have been outstanding if potential dilutive common shares had been issued for granted stock option and stock purchase rights. Common stock equivalents are excluded from the diluted calculations if a net loss is incurred as they would be anti-dilutive.

The following table presents the calculation of both basic and diluted EPS:

Inventories consist of the following:

The equipment lease facility allows the Company to lease up to $1.5 million of eligible capital equipment from Sovereign Bank. As of June 30, 2007, the Company has leased capital equipment with a net carrying value of $1,084 thousand from Sovereign Bank under the lease facility agreement.

At December 30, 2006, the Company had approximately $8,000,000 of net operating loss carryforwards available to offset income for U.S. Federal income tax purpose. The Company has established a valuation allowance against this and its other deferred tax assets.

The Company recorded a tax provision of $2,733 and $9,933 for federal income taxes for the three and six months ended June 30, 2007, respectively. This provision is based on the federal corporate alternative minimum tax rate rather than the statutory graduated tax rates. The Company believes it will be able to use net operating loss carryforwards to offset federal taxes, other than the corporate alternative minimum tax, in fiscal 2007.

The Company reduced the valuation allowance against deferred tax assets at the end of 2006 resulting in a deferred tax asset account of $400,000 on the Company`s Consolidated Balance Sheet as of year-end 2006. The Company will continue to consider the need and amount of the valuation allowance against the deferred tax assets based upon its ongoing assessment of historical and projected taxable income.

The Company recorded a tax provision of $2,875 and $14,875 for state income taxes during the three and six months ended June 30, 2007.

The following discussion and analysis of financial condition and results of operations is based upon and should be read in conjunction with the consolidated financial statements of the Company and notes thereto included in this report and the Company`s Annual Report on Form 10-K for the year ended December 30, 2006.

This Quarterly Report on Form 10-Q contains forward-looking statements that involve a number of risks and uncertainties. There are a number of factors that could cause the Company`s actual results to differ materially from those forecasted or projected in such forward-looking statements. Readers are cautioned not to place undue reliance on these forward-looking statements which speak only as of the date hereof. The Company undertakes no obligation to publicly release the results of any revisions to these forward-looking statements which may be made to reflect events or changed circumstances after the date hereof or to reflect the occurrence of unanticipated events.

The critical accounting policies utilized by the Company in preparation of the accompanying consolidated financial statements are set forth in Part II, Item 7 of the Company`s Annual Report on Form 10-K for the year ended December 30, 2006, under the heading "Management`s Discussion and Analysis of Financial Condition and Results of Operations". There have been no material changes to these policies since December 30, 2006.

CPS Technologies Corporation (the `Company` or `CPS`) (formerly Ceramics Process Systems Corporation) provides advanced material solutions to the electronics, robotics, automotive and other industries. Our primary advanced material solution is metal matrix composites, a new class of materials which are a combination of metal and ceramic. CPS has a leading, proprietary position in metal matrix composites. Metal matrix composites have several superior properties compared to conventional materials - improved thermal conductivity, thermal expansion matching, stiffness and light weight - which enable higher performance and higher reliability in our customers` products.

Like plastics 80 years ago, this new class of materials will penetrate many end markets over many years. CPS management believes our business model of providing advanced material solutions to a portfolio of high growth end markets which are, at any point in time, in various stages of the technology adoption lifecycle, provides CPS with the opportunity for sustained growth and a diversified customer base. We believe we have validated this model as we are now supplying customers at all stages of the technology adoption lifecycle.

CPS is the leader in supplying metal matrix composites to certain high growth electronics end markets which are well along in the adoption lifecycle and therefore generating significant demand. These end markets include high-performance integrated circuits and circuit boards used in internet switches and routers, as well as motor controllers used in high-speed electric trains, subway cars and wind turbines. CPS supplies heat spreaders, lids and baseplates to customers in these end markets. CPS is a fully qualified manufacturer for many of the world`s largest electronics OEMs.

Concurrently, CPS is participating in certain end markets that are at an earlier stage of the adoption lifecycle. Management believes these end markets will generate additional growth longer-term. An example of such an end market is motor controllers for hybrid automotives and trucks; CPS has been supplying prototypes into this end market for several years. Management believes that several of the programs for which we are selling prototypes will enter volume production in the future.

We are also actively working with customers in end markets at the beginning stages of the adoption lifecycle. Two examples include robotics components where the greater stiffness-to- weight ratio of metal matrix composites allows a significant performance improvement, and armor where CPS` hybrid armor technology has the potential for greater multi-hit capability, lighter weight and lower costs.

Our products are manufactured by proprietary processes we have developed including the QuicksetTM Injection Molding Process (`Quickset Process`) and the QuickCastTM Pressure Infiltration Process (`QuickCast Process`).

CPS was incorporated in Massachusetts in 1984 as Ceramics Process Systems Corporation and reincorporated in Delaware in April 1987 through a merger into a wholly-owned Delaware subsidiary organized for purposes of the reincorporation. In July 1987, CPS completed our initial public offering of 1.5 million shares of our Common Stock. In March 2007, CPS Superconductor Corporation (a wholly owned subsidiary) was renamed CPS Technologies Corporation, and the parent Company, Ceramics Process Systems Corporation was merged into it. This resulted in the Company assuming the name CPS Technologies Corporation, and Ceramics Process Systems Corporation ceasing to exist.

Total revenue was $3,067 thousand in Q2 2007, a 17% increase from revenue of $2,628 thousand in Q2 2006. Revenue growth was strongest in lids and heat spreaders, revenue from baseplates used in motor controllers also increased while revenue from cellular telephone basestations declined.

In addition, in Q2 2007 the Company achieved several design wins, particularly for baseplates used in motor controllers. In Q2 2007 the Company was active in working with several first-tier automotive suppliers in the development and production qualification of motor controller baseplates for hybrid vehicle applications, both trucks and cars. Management believes that as some or all of these specific products enter serial production they will generate meaningful growth for the Company in the future.

Total operating expenses in Q2 2007 were $2,917 thousand, a 14% increase from total operating expenses in Q2 2006 of $2,549 thousand. Cost of product sales in Q2 2007 were $2,424 thousand, a 16% increase from cost of product sales in Q2 2006 of $2,089 thousand. Cost of product sales increased primarily as a result of increased unit shipments. The gross profit on product sales in Q2 2007 of approximately 21% essentially remained constant compared to gross profit on product sales in Q2 2006.

Selling, general and administrative (SG&A) expenses were $493 thousand in Q2 2007, a 7% increase from SG&A expenses of $459 thousand in Q2 2006. The increase in SG&A expenses is primarily the result of higher commissions paid to sales representatives, higher sales promotion expenses, higher fees for external professional services and higher legal fees primarily related to the Company`s name change in Q2 2007.

The Company`s cash and cash equivalents at June 30, 2007 were $509 thousand compared to cash and cash equivalents at December 30, 2006 of $518 thousand, a decrease of $9 thousand or 2%.

Accounts receivable declined to $2,156 thousand at June 30, 2007 from $2,918 thousand at December 30, 2006. This change reflects a timing of shipments and collections. The accounts receivable balance at June 30, 2007 and December 30, 2006 is net of allowance for doubtful accounts of $5 thousand.

Inventories increased to $1,471 thousand at June 30, 2007 from $862 thousand at December 30, 2006. Raw materials inventory increased primarily due to purchased components used in the Company`s hermetic packaging product line; work-in-process inventory increased to support higher unit shipments; and finished goods inventory increased 89% primarily due to increased inventory being held at customers` locations on consignment. This inventory is shipped under existing purchase orders and per customers` requests.

The Company financed its working capital during Q2 2007 and the six months ended June 30, 2007 with existing cash balances and funds generated by operations. The Company expects it will continue to be able to fund its working capital requirements for the remainder of 2007 from these same sources.

The Company continues to sell to a limited number of customers and the loss of any one of these customers could cause the Company to require additional external financing. Failure to generate sufficient revenues, raise additional capital or reduce certain discretionary spending could have a material adverse effect on the Company`s ability to achieve its business objectives.

In April 2005, the Company entered line of credit and equipment lease agreements with Sovereign Bank. The line of credit is a revolving credit facility allowing the Company to borrow up to 80% of eligible accounts receivable, up to a maximum of $1 million, subject to the Company complying with certain covenants. The line of credit has a one-year term. In Q2 the term was extended to May 2008. As of June 30, 2007 there were no borrowings under the line of credit.

The equipment lease facility allows the Company to lease up to $1.5 million of eligible capital equipment. As of June 30, 2007, the Company has leased capital equipment with a carrying value of $1,084 thousand under the lease facility agreement.

As of June 30, 2007 production equipment included $182 thousand of construction in progress, and in addition, the Company had outstanding commitments to purchase $18 thousand of production equipment. The Company intends to finance production equipment in construction in progress and outstanding commitments under the lease agreement with existing cash balances and funds generated by operations.

In July 2006 the Company entered into a lease for its current operating facilities of approximately 37,520 square feet of rentable space located on approximately seven acres at its current site in Norton, MA. The term of the lease is ten years. The lease is a triple net lease wherein the Company is responsible for payment of all real estate taxes, operating costs and utilities. The Company also has an option to buy the property and a first right of refusal during the term of the lease. Annual rental payments are $100 thousand in year one increasing to $150 thousand in year ten.

The Company`s contractual obligations at June 30, 2007 consist of the following:

The Company is not significantly exposed to the impact of interest rate changes or foreign currency fluctuations. The Company has not used derivative financial instruments.

(a) The Company`s Chief Executive Officer and Principal Financial Officer have evaluated the effectiveness of the Company`s disclosure controls and procedures (as such term is defined in Rules 13a-14(c) and 15d - 14(c) under the Securities Exchange Act of 1934, as amended (the "Exchange Act")) as of the end of the period covered by this Form 10-Q (the "Evaluation Date"). Based on such evaluation, such officer has concluded that, as of the Evaluation Date, 1) the Company`s disclosure controls and procedures are effective to ensure that information required to be disclosed by the Company in reports the Company files under the Securities Exchange Act is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the SEC and 2) the Company`s disclosure controls and procedures are effective to ensure that information required to be disclosed in the reports that the Company files or submits under the Exchange Act is accumulated and communicated to our management, including our chief executive officer and chief financial officer, to allow timely decisions regarding required disclosure.

(b) Changes in Internal Controls. There has been no change in our internal control over financial reporting that occurred during our most recent fiscal quarter that has materially affected or is reasonably likely to materially affect our internal control over financial reporting.

ITEM 1 LEGAL PROCEEDINGS
None.

ITEM 1A RISK FACTORS
There have been no material changes to the risk factors as discussed in our 2006 Form 10-K

ITEM 2 UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS.
None.

ITEM 3 DEFAULTS UPON SENIOR SECURITIES
None.

ITEM 4 SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS
Not applicable.

ITEM 5 OTHER INFORMATION
Not applicable.

ITEM 6 EXHIBITS AND REPORTS ON FORM 8-K:
(a) Exhibits:

Exhibit 31.1 Certification Of Chief Executive Officer Pursuant To 18 U.S.C. Section 1350, As Adopted Pursuant To Section 302 Of The Sarbanes-Oxley Act Of 2002

Exhibit 31.2 Certification Of Chief Financial Officer Pursuant To 18 U.S.C. Section 1350, As Adopted Pursuant To Section 302 Of The Sarbanes-Oxley Act Of 2002

Exhibit 32.1 Certification Pursuant To 18 U.S.C. Section 1350, As Adopted Pursuant To Section 906 Of The Sarbanes-Oxley Act Of 2002

2. Reports on Form 8-K

On August 8, 2007 the Company filed a report on Form 8-K relating to the announcement of its financial results for the quarter ended June 30, 2007 as presented in a press release dated August 7, 2007.

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

CPS TECHNOLOGIES CORPORATION
(Registrant)

Date: August 8, 2007
/s/ Grant C. Bennett
Grant C. Bennett
President