Cryoport, Inc. - Annual Report: 2013 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 FORM 10-K

(Mark One)

For the fiscal year ended March 31, 2013

OR

For the transition period from                 to                 

Commission file number: 001-34632

CRYOPORT, INC.

(Exact name of Registrant as specified in its charter)

(949) 470-2300

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:  

Securities registered pursuant to Section 12(g) of the Act:

Common Stock, $0.001

Warrants to Purchase Common Stock

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No   x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ¨    No  x

The aggregate market value of Common Stock held by non-affiliates as of September 30, 2012 was $7,151,190 (1)

Number of shares of Common Stock outstanding as of June 17, 2013: 38,260,628

DOCUMENTS INCORPORATED BY REFERENCE

Part III of this report incorporates certain information by reference from the registrant’s proxy statement for the annual meeting of stockholders, which proxy statement will be filed no later than 120 days after the close of the registrant’s fiscal year ended March 31, 2013.

CRYOPORT, INC.

Fiscal Year 2013 10-K Annual Report

Table of Contents

PART I

In this Annual Report, the terms “we”, “us”, “our”, “Company” and “Cryoport” refer to Cryoport, Inc., and our wholly owned subsidiary, Cryoport Systems, Inc. This Annual Report contains forward-looking statements that involve risks and uncertainties. The inclusion of forward-looking statements should not be regarded as a representation by us or any other person that the objectives or plans will be achieved because our actual results may differ materially from any forward-looking statement. The words “may,” “should,” “plans,” “believe,” “anticipate,” “estimate,” “expect,” their opposites and similar expressions are intended to identify forward-looking statements, but the absence of these words does not necessarily mean that a statement is not forward-looking. We caution readers that such statements are not guarantees of future performance or events and are subject to a number of factors that may tend to influence the accuracy of the statements, including but not limited to, those risk factors outlined in the section titled “Risk Factors” as well as those discussed elsewhere in this Annual Report. You should not unduly rely on these forward-looking statements, which speak only as of the date of this Annual Report. We undertake no obligation to publicly revise any forward-looking statement to reflect circumstances or events after the date of this Annual Report or to reflect the occurrence of unanticipated events. You should, however, review the factors and risks we describe in the reports that we file from time to time with the Securities and Exchange Commission (“SEC”) after the date of this Annual Report.

In addition, we own or have rights to the registered trademark Cryoport^® (both alone and with a design logo) and Cryoport Express^® (both alone and with a design logo). All other Company names, registered trademarks, trademarks and service marks included in this Annual Report are trademarks, registered trademarks, service marks or trade names of their respective owners.

Overview

We provide leading edge frozen shipping logistics solutions to the biotechnology and life science industries. Since 2011, through the completion of the combination of purpose-built proprietary hardware, software information technologies and developed logistics knowhow known as “total turnkey management” we have provided logistics management for frozen shipping to these industries. Our solutions are disruptive to “old technologies” and provide reliable, economic alternatives to existing products and services utilized for frozen shipping in biotechnology and life sciences including stem cells, cell lines, vaccines, diagnostic materials, semen and embryos for in-vitro fertilization, cord blood, bio-pharmaceuticals, infectious substances and other items that require continuous exposure to frozen or cryogenic temperatures. Our solutions contribute to the reliability, efficiency, and effectiveness of clinical trials.

Cryoport Express^® Solutions include a cloud-based logistics management software branded as the Cryoportal^TM. The Cryoportal supports the management of the entire shipment process through a single interface which includes initial order input, document preparation, customs clearance, courier management, shipment tracking, issue resolution, and delivery. Cryoport’s total turnkey logistics solutions offer reliability, cost effectiveness, and convenience, while the use of recyclable and reusable components provides “green”, environmentally friendly solutions. The Cryoportal provides an array of unique information dashboards and validation documentation for every shipment.

Integral to our logistics solutions are the Cryoport Liquid Nitrogen Dry Vapor Shippers (Cryoport Express^® Shippers), which are cost-effective and reusable cryogenic transport containers (patented vacuum flasks) utilizing innovative liquid nitrogen (LN2) “dry vapor” technology. Cryoport Express^® Shippers are non-hazardous, IATA (International Air Transport Association) certified, and validated to maintain stable temperatures below minus 150° Celsius for a 10-plus day dynamic shipment period. The Company currently features two Cryoport Express^® Shipper models, the Standard Dry Shipper (holding up to approximately 75-2.0 ml vials) and the High Volume Dry Shipper (holding up to approximately 500-2.0 ml vials).

The Cryoport Express^® Solutions include recording and retaining a fully documented “chain-of-custody” and, at the client’s option, “chain-of-condition” for every shipment, helping ensure that quality, safety, efficacy, and stability of shipped commodities are maintained. This recorded and archived information allows our customers to meet the exacting requirements necessary for scientific work and for regulatory purposes. Cryoport Express^® Solutions can be used by customers, as a “turnkey” solution, through direct access to the cloud-based Cryoportal, or by contacting Cryoport Client Care for order entry tasks. Cryoport provides 24/7/365 logistics services through its Client Care team and also provides complete training and process management services to support each client’s specific requirements.

From 2011 through 2012, the Cryoport Express^® Solution was the Company’s principal focus for development and commercialization. During the last month’s of 2012, the Company’s approach to the market was enhanced to include a comprehensive solutions orientation and it expanded its service offering to address the various broader market needs in the biotechnology and life science industries. Today, as a solutions provider, Cryoport tailors its frozen logistics solutions to client requirements. In addition to custom solutions, the Company’s primary customer facing solutions offerings are as follows:

The fully outsourced turnkey logistics solution described above.

Cryoport ships an inventory of Cryoport Express^® Shippers to the customer (uncharged and in bulk) enabling the customer to charge the shippers at their facility, process their orders through the Cryoportal which permits Cryoport Client Care to oversee the logistics of each shipment and the return of the shippers to Cryoport for cleaning, testing and refurbishing. Cryoport Client Care provides the 24/7/365 logistics services utilizing its Cryoportal logistics platform.

Cryoport ships a fully charged Cryoport Express^® Shipper(s) to the customer enabling the customer to utilize its internal expertise to manage all or a portion of the logistics services. As with the above solutions, the shippers are returned to Cryoport for cleaning, testing and refurbishing within a pre-determined time period.

The Cryoport logistics team provides a tailored and full range of logistics support solutions. In addition to tailoring a management solution, the robust, enterprise grade Cryoportal is used to provide complete logistics services while enabling the customer to utilize their own packaging solutions or Cryoport Express^® Shippers. Cryoport can provide onsite logistics personnel allowing the customer to fully outsource their cold chain logistics needs to Cryoport and focus on its core competencies.

“Powered by Cryoport” is an important partnership arrangements with integrators, freight forwarders and other logistics providers, enabling partners to expand their solutions offering by adding the total Cryoport Express^® Shipper solution to their customer offering.

One of our distribution partners is Federal Express Corporation (“FedEx”). We have an agreement with FedEx to provide frozen shipping logistics services through the combination of our purpose-built proprietary technologies and turnkey management processes. FedEx markets and sells Cryoport’s services for frozen temperature-controlled cold chain transportation as its FedEx^® Deep Frozen Shipping Solution, on a non-exclusive basis and at its sole expense. During fiscal year 2013, the Company worked closely with FedEx to further align its sales efforts and accelerate penetration within FedEx’s biotechnology and life sciences customer base through improved processes, sales incentives, joint customer calls and more frequent communication at the sales and executive level. In addition, the Company has developed a FedEx branded portal, which is “powered by the Cryoport”, for use by FedEx and its customers giving them access to the full capabilities of our logistics management platform.

In January 2013, we entered into a master agreement (“FedEx Agreement”) with FedEx renewing these services and providing FedEx with a non-exclusive license and right to use a customized version of our Cryoportal for the management of shipments made by FedEx customers. The FedEx Agreement became effective on January 1, 2013 and, unless sooner terminated as provided in the FedEx Agreement, expires on December 31, 2015.

Pursuant to an agreement with DHL Express (USA), Inc. (“DHL”), DHL biotechnology and life science customers have direct access to our cloud-based order entry and tracking portal to order Cryoport Express^® Dry Shippers and receive preferred DHL shipping rates. The agreement covers DHL shipping discounts that may be used to support our customers using the Cryoport Express^® Solutions. In connection with the agreement, we have integrated our proprietary Cryoportal to DHL’s tracking and billing systems to provide DHL biotechnology and life science customers with a seamless way (“powered by Cryoport”) of shipping their critical biological material worldwide.

In December 2012, we signed an agreement with Pfizer Inc. relating to Zoetis Inc. (formerly the animal health business unit of Pfizer Inc.) pursuant to which we were engaged to manage frozen shipments of a key poultry vaccine. Under this arrangement, the Company is providing on-site logistics personnel and its logistics management platform, the Cryoportal^TM, to manage shipments from the Zoetis manufacturing site in the United States to domestic customers as well as various international distribution centers. As part of its logistics management services, the Company will analyze shipping data and processes to further streamline Zoetis’ logistics, ensuring products arrive at their destinations in specified conditions, on-time and with the optimum uses of resources. The Company manages Zoetis’ total fleet of dewar flask shippers used for this purpose, including liquid nitrogen shippers.

We offer our solutions to companies in the biotechnology and life sciences industries and specific verticals including manufacturers of stem cells and cell lines, diagnostic laboratories, bio-pharmaceuticals, contract research organizations, in-vitro fertilization, cord blood, vaccines, tissue, animal husbandry, and other producers of commodities requiring reliable frozen solutions for logistics problems. These companies operate within heavily regulated environments and as such, changing vendors and distribution practices typically require a number of steps, which may include the audit of our facilities, review of our procedures, qualifying us as a vendor, and performing test shipments. This process can take up to nine months or longer to complete prior to a potential customer adopting one or more of the Cryoport Express^® Solutions.

Corporate History and Structure

We are a Nevada corporation originally incorporated under the name G.T.5-Limited (“GT5”) on May 25, 1990. In connection with a Share Exchange Agreement, on March 15, 2005 we changed our name to Cryoport, Inc. and acquired all of the issued and outstanding shares of common stock of Cryoport Systems, Inc., a California corporation, in exchange for 2,410,811 shares of our common stock (which represented approximately 81% of the total issued and outstanding shares of common stock following the close of the transaction). Cryoport Systems, Inc., which was originally formed in 1999 as a California limited liability company, and subsequently reorganized into a California corporation on December 11, 2000, remains the operating company under Cryoport, Inc. Our principal executive offices are located at 20382 Barents Sea Circle, Lake Forest, CA 92630. The telephone number of our principal executive offices is (949) 470-2300, and our main corporate website is www.Cryoport.com. The information on, or that can be accessed through our website is not part of this Annual Report.

The company became public by a reverse merger with a “shell” company in May 2005. Over time the Company has transitioned from being a development company to a fully operational public company, providing cold chain logistics solutions to the biotechnology and life sciences industries, globally.

Since fiscal year 2011 the Company has taken significant steps towards commercialization of the Cryoport Express™ logistics solutions in validating, perfecting and expanding its features. The Company has now managed shipments of its Cryoport Express Shippers through its Cryoportal into and out of approximately 58 countries, handling a vast array of different biological products and specimens.

During fiscal year 2012, the Company completed the external validation of its Cryoport Express Standard Shipper to ISTA 7E standards and introduced the Cryoport Express High Volume Shipper in response to customer demand. The Company also set up its European distribution depot in Holland to better serve its customer base and support sales efforts in Europe.

During fiscal year 2013, the Company elected Jerrell Shelton President and CEO, realigned its sales team and introduced a solutions sales and operating strategy. In addition, and as part of its global expansion plans, the Company set up its Asian distribution depot in Singapore. The Company also formed a Commercial Advisory Board (CAB) with Bill Taaffe, a founding member of ICON Clinical Research becoming its first member.

In April 2013, Richard G. Rathmann was appointed to the Company’s Board of Directors.  As a venture fund manager, investor and advisor to life science companies over the past 20 years, Rathmann brings new experience and insights to the Board.

Cryoport Express^® Solutions

Cryoport Express^® Solutions consist of the Cryoportal, a cloud-based logistics management software which programmatically assists in the management of all aspects of the logistics operations including the Cryoport Express^® Shippers and the Cryoport Express^® Smart Pak data logger. The Cryoportal is capable of producing Cryoport Express^® Analytics which reports shipment performance metrics and evaluates temperature-monitoring data collected by the data logger during shipment. Cryoport Express^® Solutions are focused on improving the reliability of frozen shipping while reducing our clients’ overall operating costs. This is accomplished by providing a complete end-to-end solution for the transport and monitoring of frozen or cryogenically preserved biological or pharmaceutical materials shipped primarily though integrators and specialty couriers. Certain of the intellectual property underlying our Cryoport Express^® Solutions (other than that related to the Cryoport Express^® Shippers) has been, and continues to be, developed under a contract with an outside software development company, with the underlying technology licensed to us for exclusive use in our field of use.

Cryoportal

The Cryoportal is used by Cryoport, our customers and our business partners to automate the entry of orders, prepare customs documentation and to facilitate status and location monitoring of shipped orders while in transit. It is used by Cryoport to assist in managing logistics operations and to reduce administrative costs typically provisioned through manual labor relating to order-entry, order processing, preparation of shipping documents and back-office accounting. It is also used to support the high level of customer service expected by the industry. Certain features of the Cryoportal reduce operating costs and facilitate the scaling of Cryoport’s business, but more importantly they offer significant value to the customer in terms of cost avoidance and risk mitigation. Examples of these features include automation of order entry, development of Key Performance Indicators (“KPI”) to support our efforts for continuous process improvements in our business, and programmatic exception monitoring to detect and sometimes anticipate delays in the shipping process, often before the customer or the shipping company becomes aware of them.

The Cryoportal also serves as the communications center for the management, collection and analysis of Smart Pak data collected from Smart Pak data loggers in the field. Data is converted into pre-designed reports containing valuable and often actionable information that becomes the quality control standard or “pedigree” of the shipment. This information can be utilized by Cryoport to provide valuable feedback to the customer relating to their shipments.

The Cryoportal was developed as a carrier-agnostic system, allowing the customer and the Cryoport Client Care team the use of multiple integrators, freight forwarders or couriers depending on the specific requirements and customer preferences. To increase operational efficiencies the Cryoportal has already been integrated with the tracking systems of two major integrators and is planning to integrate with other key logistics providers.

The Cryportal was developed for time- and temperature-sensitive shipments that are required to maintain specific temperatures, such as ambient (between 20 and 25°C), chilled (between 2 and 8°C) or frozen (minus 10°C or less all the way down to cryogenic temperatures) to ensure that the shipped specimen is not subject to degradation or out of its designated “safe” range. While our current focus is on frozen shipments within the biotechnology and life sciences industries using the logistics solutions described herein, the use of the Cryoportal can and may be extended into other temperature ranges.

The Cryoport Express^® Shippers

Our Cryoport Express^® Shippers are cryogenic dry vapor shippers capable of maintaining cryogenic temperatures of minus 150° Celsius or below for a dynamic shipping period of 10 or more days. A dry cryogenic shipper is a device that uses liquid nitrogen contained inside a vacuum insulated bottle which serves as a refrigerant to provide stable storage temperatures below minus 150° Celsius. Our Cryoport Express^® Shippers are designed to ensure that there is no pressure build up as the liquid nitrogen evaporates or spillage of liquid nitrogen. We have developed a proprietary retention system to ensure that liquid nitrogen stays inside the vacuum container, which allows the shipper to be designated as a dry shipper meeting International Air Transport Association (“IATA”) requirements. Biological or pharmaceutical specimens are stored in a specimen chamber, referred to as a “well” inside the container, refrigeration is provided by cold nitrogen gas evolving from the liquid nitrogen entrapped within the retention system. Specimens that may be transported using our cryogenic shipper include live cell scientific or pharmaceutical commodities such as cancer vaccines, diagnostic materials, semen, eggs and embryos, infectious substances and other items that require continuous exposure to frozen or cryogenic temperatures (e.g., temperatures below minus 150° Celsius).

We currently offer two sizes of dry vapor shippers, the Cryoport Express^® Standard Shipper with a storage capacity of up to 75 0.2ml vials and the Cryoport Express^® High Volume Shipper which was introduced in January of 2012 with a capacity of up to 500 0.2ml vials.

The technology underlying the Cryoport Express^® Shipper was developed by modifying and advancing technology from our first generation of reusable cryogenic dry shippers. While our Cryoport Express^® Shippers share many of the characteristics and basic design details of our earlier shippers, we are manufacturing our Cryoport Express^® Shippers from alternative, lower cost and lower weight materials, which reduces overall operating costs. We maintain ongoing development efforts related to our shippers which are principally focused on material properties, particularly those properties related to the low temperature requirement, the vacuum retention characteristics, such as the permeability of the materials, and lower cost and lower weight materials in an effort to meet the market needs for achieving a lower cost frozen and cryogenic shipping solution. Other advances additional to the development work on the cryogenic container include both an improved liquid nitrogen retention system and a secondary protective, spill proof packaging system. This secondary packaging system, contains a low cost outer packaging that lends itself to disposability, and it is made of recyclable materials. Further, it adds an additional liquid nitrogen retention capability to further assure compliance with IATA and ICAO regulations that prohibit egress of liquid nitrogen from the shipping package. ICAO stands for the International Civil Aviation Organization, which is a United Nations organization that develops regulations for the safe transport of dangerous goods by air.

Cryoport Express^® Standard Shippers

The Cryoport Express^® Standard Shippers are lightweight, low-cost, re-usable dry vapor liquid nitrogen storage containers that we believe combine the best features of packaging, cryogenics and high vacuum technology. A Cryoport Express^® Standard Shipper is composed of an aluminum metallic dewar flask, with a well for holding the biological material in the inner chamber. The dewar flask, or “thermos bottle,” is an example of a practical device in which the conduction, convection and radiation of heat are reduced as much as possible. The inner chamber of the shipper is surrounded by a high surface, low-density material which retains the liquid nitrogen in-situ by absorption, adsorption and surface tension. Absorption is defined as the taking up of matter in bulk by other matter, as in the dissolving of a gas by a liquid, whereas adsorption is the surface retention of solid, liquid or gas molecules, atoms or ions by a solid or liquid. This material absorbs liquid nitrogen several times faster than currently used materials, while providing the shipper with a hold time and capacity to transport biological materials safely and conveniently. The annular space between the inner and outer dewar chambers is evacuated to a very high vacuum (10-6 Torr). The specimen-holding chamber has a primary cap to enclose the specimens, and a removable and replaceable secondary cap to further enclose the specimen-holding container and to contain the liquid nitrogen. The entire dewar vessel is then wrapped in a plurality of insulating and cushioning materials and placed in a disposable outer packaging made of recyclable material. The Cryoport Express^® Standard Shipper has a storage capacity of up to 75 0.2ml vials.

Cryoport Express^® High Volume Shippers

The Cryoport Express^® High Volume Shipper also uses a dry vapor liquid nitrogen (LN2) technology to maintain below -150° C temperatures with a dynamic shipping endurance of 10 days. The Cryoport Express^® High Volume Shipper is based on the same dry vapor technology as Cryoport’s original standard dry shipper and utilizes an absorbent material to hold LN2, thus providing the extended endurance time and IATA validation as a non-hazardous shipping container. The high volume dry shipper is reusable and recyclable, making it a highly sustainable and cost effective method of transporting life science materials. The Cryoport Express^® High Volume Shipper has a storage capacity of up to 500 0.2ml vials.

We believe Cryoport Express^® Solutions are the best and most cost effective solution available in the biotechnology and life sciences markets and satisfy customer needs and scientific and regulatory requirements relating to the shipment of time- and temperature-critical, frozen and refrigerated transport of biological materials, such as stem cells, cell lines, pharmaceutical clinical trial samples, gene biotechnology, infectious materials handling, animal and human reproduction markets. Due to our proprietary technology and innovative design, our shippers are less prone to losing functional hold time when not kept in an upright position than the competing products because our proprietary dry vapor technology and innovative design prevent the spilling or leakage of the liquid nitrogen when the container is tipped or on its side which would otherwise adversely affect the functional hold time of the shipper.

An important feature of our Cryoport Express^® Shippers is their compliance with the stringent packaging requirements of IATA Packing Instructions 602 and 650, respectively. These specifications include meeting internal pressure (hydraulic) and drop performance requirements.

The Cryoport Express^® Smart Pak

Temperature monitoring is a high value feature from our customers’ perspective as it is an effective and reliable method to determine that the shipment materials were not damaged or did not experience degradation during shipment due to temperature fluctuations. Our Smart Pak System is a self-contained automated data logger capable of recording cryogenic temperatures of samples shipped in our Cryoport Express® Shippers. The data-logging temperature probe is in the vapor plug of the shipper for the most accurate reading. The temperature mapping includes both the temperature inside the chamber (which is closest to the actual biomaterial) and the external temperature. This reading, combined with the mapping of every shipment check-in point, provides a holistic view of the complete shipping process. At the client’s election, shipments can have a full chain-of-custody and chain-of-condition with both data monitoring and analysis available.

Chain-of-Condition

Data monitoring starts with a custom built data logger. The data logger can be set up to report during the shipment and/or after the shipment. For those shipments involving biologics, clinical trials or any other material that needs to be verified before receiving, the information recorded by the data logger can be downloaded to the data station onsite. Alternatively, Cryoport can upload the temperature data from the data logger for analysis to the Cryoportal upon return of the shipper. The Cryoportal also acts as the data repository for all shipment and temperature information, which the customer can access remotely through the internet. Chain of condition service is available at the client’s election.

Chain-of-Custody

When overlaid with the carrier check-ins, the data monitor and analysis also provides a chain of custody. The report from the data monitor serves as analysis for temperature monitoring of the entire shipment as well as a tampering warning. If the client has elected to have chain of condition monitoring, each time the container is opened there is a temperature record. The report will identify outlier temperature excursions such as opening the shipment in customs or tampering and allow for more conclusive investigations to ensure specimen shipped were not adversely impacted during shipment.

Cryoport Express^® Analytics

The Cryoportal is an important information technology element of our business strategy and has been designed to support planned future features to allow for an expansion of our solutions offering. Analytics is a term used by IT professionals to refer to performance benchmarks or Key Performance Indicators (KPI’s) that management utilizes to measure performance against desired standards. Examples for analytics tracked through the Cryoportal include time-based metrics for order processing time and on-time deliveries by our shipping partners, as well as profiling shipping lanes to determine average transit times and predicting potential shipping exceptions based on historical metrics. The analytical results are being utilized by Cryoport to render consultative and proactive customer services.

Biological Material Holders

A patented containment bag is used in connection with the shipment of infectious or dangerous goods using the Cryoport Express® Shippers. Up to 75 cryovials (polypropylene vials with high-density polyethylene closures), set on aluminum canes are placed into an absorbent pouch, which is designed to absorb the entire contents of all the vials in the event of leakage. This pouch is then placed in a watertight Tyvek bag (secondary packaging) capable of withstanding cryogenic temperatures, and then sealed. This bag is then placed into the well of the cryogenic shipper.

Other Product Candidates and Development Activities

We are continuing our research and development efforts to further refine our current technology as well as explore opportunities with partners to offer complementary packaging solutions for frozen temperature (- 10° Celsius or less), chilled temperature (2° to 8° Celsius) and ambient temperature (between 20° and 25° Celsius) shipping markets.

We also continue to further expand the functionality of our Cryoportal, to ensure a high level of effectiveness and efficiency in the cold chain logistics process and to allow for intelligent and easy data monitoring and analysis.

Government Regulation

The shipping of diagnostic specimens, infectious substances and dangerous goods, whether via air or ground, falls under the jurisdiction of many state, federal and international agencies. The quality of the containers, packaging materials and insulation that protect a specimen determine whether or not it will arrive in a usable condition. Many of the regulations for transporting dangerous goods in the United States are determined by international rules formulated under the auspices of the United Nations. For example, the ICAO is the United Nations organization that develops regulations (Technical Instructions) for the safe transport of dangerous goods by air. If shipment is by air, compliance with the rules established by IATA is required. IATA is a trade association made up of airlines and air cargo couriers that publishes annual editions of the IATA Dangerous Goods Regulations. These regulations interpret and add to the ICAO Technical Instructions to reflect industry practices. Additionally, the CDC has regulations (published in the Code of Federal Regulations) for interstate shipping of specimens, and OSHA also addresses the safe handling of Class 6.2 Substances. Our Cryoport Express^® Shippers meet Packing Instructions 602 and 650 and are certified for the shipment of Class 6.2 Dangerous Goods per the requirements of the ICAO Technical Instructions for the Safe Transport of Dangerous Goods by Air and IATA. Our present and planned future versions of the Cryoport Smart Pak data logger will likely be subject to regulation by Federal Aviation Administration (“FAA”), Federal Communications Commission (“FCC”), Food and Drug Administration (“FDA”), International Air Association (“IATA”) and possibly other agencies which may be difficult to determine on a global basis.

We are also subject to numerous other federal, state and local laws relating to such matters as safe working conditions, manufacturing practices, environmental protection, fire hazard control, and disposal of hazardous or potentially hazardous substances. We may incur significant costs to comply with such laws and regulations now or in the future.

Manufacturing and Raw Materials

Manufacturing. Due to our adequate levels of dewar inventories for the coming year, manufacturing is currently suspended. The component parts for our shippers are primarily manufactured at third party manufacturing facilities. We also have a warehouse at our facility in Lake Forest, California, where we are capable of manufacturing certain parts and to fully assemble our shipppers. Most of the components that we use in the manufacture of our shippers are available from more than one qualified supplier. For some components, however, there are relatively few alternate sources of supply and the establishment of additional or replacement suppliers may not be accomplished immediately, however, we have identified alternate qualified suppliers. Should this occur, we believe that with our current level of inventory of shippers we have enough inventory to cover our forecasted demand. There are no specific agreements with any manufacturer nor are there any long term commitments to any manufacturer. We believe that most of the manufacturers currently used by us could be replaced within a short period of time as none have a proprietary component or a substantial capital investment specific to our shippers.

Our production and manufacturing process incorporates innovative technologies developed for aerospace and other industries which are cost effective, easier to use and more functional than the traditional dry ice devices and other methods currently used for the shipment of temperature-sensitive materials. Our manufacturing process uses non-hazardous cleaning solutions, which are provided and disposed of by a supplier approved by the Environmental Protection Agency (the “EPA”). EPA compliance costs for us are therefore negligible.

Cryoport Express^® High Volume Shippers are purchased from a third party and modified using our proprietary technology and know-how.

Raw Materials. Various common raw materials are used in the manufacture of our shippers and in the development of our technologies. These raw materials are generally available from several alternate distributors and manufactures. We have not experienced any significant difficulty in obtaining these raw materials and we do not consider raw material availability to be a significant factor in our business.

Patents and Proprietary Rights

In order to remain competitive, we must develop and maintain protection on the proprietary aspects of our technologies. We rely on a combination of patents, copyrights, trademarks, trade secret laws and confidentiality agreements to protect our intellectual property rights. We currently own three registered United States trademarks and three issued United States patents primarily covering various aspects of our products. In addition, we have filed a patent application for various aspects of our shipper and web-portal, which includes, in part, various aspects of our business model referred to as the Cryoport Express^® System, and we intend to file additional patent applications to strengthen our intellectual property rights. The technology covered by the above indicated issued patents relates to matters specific to the use of liquid nitrogen shippers in connection with the shipment of biological materials. The concepts include those of disposability, package configuration details, liquid nitrogen retention systems, systems related to thermal performance, systems related to packaging integrity, and matters generally relevant to the containment of liquid nitrogen. Similarly, the trademarks mentioned relate to the cryogenic temperature shipping activity. Issued patents and trademarks currently owned by us include:

Our success depends in part upon our ability to develop proprietary products and technologies and to obtain patent coverage for these products and technologies. We intend to file trademark and patent applications covering any newly developed products, methods and technologies. However, there can be no guarantee that any of our pending or future filed applications will be issued as patents. There can be no guarantee that the U.S. Patent and Trademark Office or some third party will not initiate an interference proceeding involving any of our pending applications or issued patents. Finally, there can be no guarantee that our issued patents or future issued patents, if any, will provide adequate protection from competition.

Patents provide some degree of protection for our proprietary technology. However, the pursuit and assertion of patent rights involve complex legal and factual determinations and, therefore, are characterized by significant uncertainty. In addition, the laws governing patent issuance and the scope of patent coverage continue to evolve. Moreover, the patent rights we possess or are pursuing generally cover our technologies to varying degrees. As a result, we cannot ensure that patents will issue from any of our patent applications, or that any of its issued patents will offer meaningful protection. In addition, our issued patents may be successfully challenged, invalidated, circumvented or rendered unenforceable so that our patent rights may not create an effective barrier to competition. Moreover, the laws of some foreign countries may not protect our proprietary rights to the same extent, as do the laws of the United States. There can be no assurance that any patents issued to us will provide a legal basis for establishing an exclusive market for our products or provide us with any competitive advantages, or that patents of others will not have an adverse effect on our ability to do business or to continue to use our technologies freely.

We may be subject to third parties filing claims that our technologies or products infringe on their intellectual property. We cannot predict whether third parties will assert such claims against us or whether those claims will hurt our business. If we are forced to defend against such claims, regardless of their merit, we may face costly litigation and diversion of management’s attention and resources. As a result of any such disputes, we may have to develop, at a substantial cost, non-infringing technology or enter into licensing agreements. These agreements may be unavailable on terms acceptable to it, or at all, which could seriously harm our business or financial condition.

We also rely on trade secret protection of our intellectual property. We attempt to protect trade secrets by entering into confidentiality agreements with third parties, employees and consultants, although, in the past, we have not always obtained such agreements. It is possible that these agreements may be breached, invalidated or rendered unenforceable, and if so, our trade secrets could be disclosed to our competitors. Despite the measures we have taken to protect our intellectual property, parties to such agreements may breach confidentiality provisions in our contracts or infringe or misappropriate our patents, copyrights, trademarks, trade secrets and other proprietary rights. In addition, third parties may independently discover or invent competitive technologies, or reverse engineer our trade secrets or other technology. Therefore, the measures we are taking to protect our proprietary technology may not be adequate.

Customers and Distribution

As a result of growing globalization, including such areas as biotechnology and life science, clinical trials, distribution of pharmaceutical products and reproductive medicine, the requirement for effective and reliable solutions for keeping clinical samples, pharmaceutical products and other specimen at frozen temperatures takes on added significance due to more complex shipping routes, extended shipping times, custom delays and logistics challenges. Today, such specimens are traditionally shipped in styrofoam cardboard insulated containers packed with dry ice, gel/freezer packs or a combination thereof. The current dry ice solutions have limitations that severely limit their effective use for both short and long-distances (e.g., international). Conventional dry ice shipments often require labor-intensive “re-icing” operations resulting in higher labor and shipping costs.

With proper marketing and sales initiatives, we believe our patented cryogenic shippers and the Cryoportal logistics management platform make us well positioned to take advantage of the growing demand for effective and efficient international transport of temperature sensitive materials resulting from continued globalization. Of particular significance is the trend within the life sciences and biotechnology industries toward globalization. We believe that pharmaceutical companies conducting clinical trials in foreign countries represent a growing opportunity for Cryoport.

We provide domestic shipping solutions in situations where specimen must be kept at cryogenic temperatures and in regions where there is a high priority placed on maintaining the integrity of materials shipped at cryogenic temperatures.

Pharmaceutical Clinical Trials. Every United States based pharmaceutical company developing a new drug must seek drug development protocol approval by the FDA. These clinical trials are to, among other things, test the safety and efficacy of the potential new drug. A significant amount of clinical trial activity is managed by a number of large Clinical Research Organizations (“CROs”).

In connection with the clinical trials, due to globalization, the companies can be enrolled from all over the world and may regularly submit a blood or other specimen at the local hospital, doctor’s office or laboratory. These samples are then sent to specified testing laboratories, which may be local or in another country. The testing laboratories will typically set the requirements for the storage and shipment of blood specimens. In addition, drugs used by the patients may require frozen shipping to the sites of the clinical trials. While both domestic and international shipping of these specimens is accomplished using dry ice today, international shipments especially present several problems, as dry ice, under the best of circumstances, can only provide freezing for one to two days, in the absence of re-icing (which is quite costly). Because shipments of packages internationally can take longer than one to two days or be delayed due to flight cancellations, incorrect destinations, labor problems, ground logistics, customs delays and safety reasons, dry ice is not always a reliable and/or cost effective option. Clinical trial specimens are often irreplaceable because each one represents clinical data at a prescribed point in time, in a series of specimens on a given patient, who may be participating in a trial for years. Sample integrity during the shipping process is vital to retaining the maximum number of patients in each trial. Our shippers are ideally suited for this market, as our longer hold time ensures that specimens can be sent over long distances with minimal concern that they will arrive in a condition that will cause their exclusion from the trial. There are also many instances in domestic shipments where Cryoport Express^® Shippers will provide higher reliability and be cost effective.

Furthermore, the IATA requires that all airborne shipments of laboratory specimens be transmitted in either IATA Instruction 650 or 602 certified packaging. We have developed and obtained IATA certification of our Cryoport Express^® System, which is ideally suited for this market, in particular due to the elimination of the cost to return the reusable shipper.

Biotechnology and Diagnostic Companies. The biotechnology market includes basic and applied research and development in diverse areas such as stem cells, cloning, gene therapy, DNA tumor vaccines, tissue engineering, genomics, and blood products. Companies participating in the foregoing fields rely on the frozen transport of specimens in connection with their research and development efforts, for which our Cryoport Express^® Shippers are ideally suited.

Central Laboratories. With the increase and globalization of clinical studies and trials, logistics has become more complex and ensuring sample integrity has become more challenging. International courier costs are now consuming a significant portion of global protocol budgets. We believe laboratories performing the testing of samples collected during the conduct of these global multi-site studies are looking for reliable state-of-the-art logistics solutions.

Pharmaceutical Distribution. The current focus for the Cryoport Express^® System also includes the area of pharmaceutical distribution. There are a significant number of therapeutic drugs and vaccines currently or anticipated soon to be, undergoing clinical trials. After the FDA approves them for commercial marketing, it will be necessary for the manufacturers to have a reliable and economical method of distribution to the physician who will administer the product to the patient. It is likely that the most efficient and reliable method of distribution will be to ship a single dosage to the administering physician. These drugs are typically identified to individual patients and therefore will require a complete tracking history from the manufacturer to the patient. The most reliable method of doing this is to ship a unit dosage specifically for each patient. If such drugs require maintenance at frozen or cryogenic temperatures, each such shipment will require a frozen or cryogenic shipping package. Cryoport can provide the technology to meet this anticipated need.

Fertility Clinics and In Vitro Fertilization (“IVF”). Maintaining cryogenic temperatures during shipping and transfer of in vitro fertilization specimens like eggs, sperm, or embryos is critical for cell integrity in order to retain viability, stabilize the cells, and ensure reproducible results and successful IVF treatment. There are approximately 3,000 fertility clinics worldwide. Cryoport anticipates that this market will continue to grow; in the United States alone, the fertility market has grown to over $4.0 billion with over 1.3 million women seeking treatment each year. In the worldwide market, it is reported that there are over one billion IVF cycles per year and growing.

Sales and Marketing

We currently have two senior sales directors and one area sales manager in the United States, one senior sales director in Europe, one inside sales representative for IVF and a part time senior director of marketing promoting the use of our Cryoport Express^® System on a direct basis. Given the global nature of our business, our sales and marketing initiatives should more thoroughly cover the Americas, Europe and Asia. For the fiscal year ended March 31, 2013, no customers account for more than 10% of total revenues.

Our geographical revenues for the fiscal year ended March 31, 2013 were as follows:

We renewed our agreement with FedEx and plan to further expand our revenues and marketing efforts through the establishment of additional strategic partnerships with global integrators and freight forwarders and, subject to available financial resources, the hiring of additional marketing and sales personnel.

Cryoport Operations Centers

In addition to the services provided through our facility in Lake Forest, California, we have contracted with third parties to run our European Operations Center (located in Leiden, Holland) and Asian Operations Center (located in Singapore). The operations centers provide warehousing, shipping, receiving, refurbishing and recycling services for our shipping containers. This approach is a cost-effective way to initiate operations outside of the US and allows us to scale up as our business grows globally. In March 2013, we shut down a small third-party operations center in New Delhi, India without impact on our business or customers.

Industry and Competition

Our products and services are sold into a rapidly growing segment of the logistics industry focused on the temperature sensitive packaging and shipping of biological materials. Expenditures for “value added” packaging for frozen transport have been increasing for the past several years and, due in part to continued globalization, are expected to continue to increase even more in the future as more domestic and international biotechnology firms introduce pharmaceutical products that require continuous refrigeration at cryogenic temperatures. We believe this will require a greater dependence on passively controlled temperature transport systems (i.e., systems having no external power source). In addition, we expect that industry standards and regulations will be introduced globally, requiring more comprehensive tracking and validation of shipping temperatures.

We believe that growth in the following markets has resulted in the need for increased reliability, efficiencies and greater flexibility in the temperature sensitive segment of the logistics market:

Many of the biological products in these above markets require transport in a frozen state as well as the need for shipping containers which have the ability to maintain a frozen, cryogenic environment (e.g., minus 150° Celsius) for a period ranging from two to ten days (depending on the distance and mode of shipment). These products include stem cells, semen, embryo, tissue, tissue cultures, cultures of viruses and bacteria, enzymes, DNA materials, vaccines, certain pharmaceutical products, etc.

The following comparisons apply only to the hardware portion of our solutions; our entire solutions integrate hardware, software and cold chain logistics know-how tailored to client requirements.

Cryoport Express Shippers (Liquid Nitrogen Dry Vapor) compared to Dry Ice Shipments

One problem faced by many companies operating in these specialized markets is the limited number of cryogenic shipping systems serving their needs. The currently adopted protocol and the most common method for packaging frozen transport in these industries is the use of solid-state carbon dioxide (dry ice). Dry ice is and has been used extensively in shipping to maintain a frozen state for a period of one to four days. Dry ice is used in the transport of many biological products, such as pharmaceuticals, laboratory specimens and certain infectious materials. The common approach to shipping these items via ground freight is to pack the product in a container, such as an expanded polystyrene (styrofoam) box or a molded polyurethane box, with a variable quantity of dry ice. The box is taped or strapped shut and shipped to its destination with freight charges based on its initial shipping weight. All dry ice shipping is considered dangerous goods shipping, requiring extra packaging steps and adding costs. It gives off carbon dioxide and sublimates unevenly and in short duration.

With respect to shipments via specialized courier services, there is no standardized method or device currently in use for the purpose of transporting temperature-sensitive frozen biological specimens. One common method for courier transport of biological materials is to place frozen specimens, refrigerated specimens, and ambient specimens into a compartmentalized container, similar in size to a 55 quart Coleman or Igloo cooler. The freezer compartment in the container is loaded with a quantity of dry ice at minus 78° Celsius, while the refrigerated compartment at 8° Celsius utilizes ice substitutes.

Two manufacturers of the polystyrene and polyurethane containers frequently used in the shipping and courier transport of dry ice frozen specimens are Insulated Shipping Containers, Inc. and Tegrant (formerly SCA Thermosafe). When these containers are used with dry ice, the average sublimation rate (e.g., the rate at which dry ice turns from a solid to a gaseous state) in a container with a 1 ¹/ ₂ inch wall thickness is slightly less than three pounds per 24 hours. Other existing refrigerant systems employ the use of gel packs and ice substitutes for temperature maintenance. Gels and eutectic solutions (phase changing materials) with a wide range of phasing temperatures have been developed in recent years to meet the needs of products with varying specific temperature control requirements.

The use of dry ice and ice substitutes, however, regardless of external packaging used, are frequently inadequate because they do not provide low enough storage temperatures and, in the case of dry ice, last for only a few days without re-icing. As a result, companies run the risk of increased costs due to lost specimens and additional shipping charges due to the need to re-ice.

Some of the other disadvantages to using dry ice for shipping or transporting temperature sensitive products are as follows:

Due to the limitations of dry ice, specimens that require frozen shipping are more securely shipped at true cryogenic temperatures using a service such as liquid nitrogen dry vapor shippers (Cryoport Express Shippers) , or liquid nitrogen shippers where the specimen is kept over actual liquid nitrogen. However, liquid nitrogen is hazardous and has many pitfalls including safety and expense.

Cryoport Express Shippers (Liquid Nitrogen Dry Vapor) compared to Liquid Nitrogen Dewars/Tanks

There are distinct disadvantages when using liquid nitrogen compared to the dry vapor liquid nitrogen used in Cryoport Express^® Shippers. Liquid nitrogen dewars/tanks are classified as dangerous goods and cannot be shipped as parcel. In addition, the liquid nitrogen has to be disposed of prior to returning the dewar/tank to its origin. These issues add additional procedural steps and costs to the shipment. In addition, there is a risk of liquid nitrogen leakage if the dewar/tank tips to the side during transport, which can cause bodily injury and compromise the specimen being shipped. Due to the use of our proprietary technology, our Cryoport Express^® Shippers are not prone to leakage when on their side or inverted, thereby protecting the integrity of our shipper’s hold time and being safe for handling.

While both, liquid nitrogen dry vapor and liquid nitrogen shippers provide solutions to the issues encountered when shipping with dry ice, liquid nitrogen shippers have some draw backs. For example, the cost for a liquid nitrogen shipper typically can range from $650 to $4,000 per unit, which can substantially limit their use for the transport of many common biologics, particularly with respect to small quantities such as is the case with direct to the physician drug delivery. Because of the initial cost and limited production of these containers, they are designed to be reusable. However, the cost of returning these containers can be significant, particularly in international markets, because most applications require only one-way shipping. In addition, the logistics support of cryogenic shippers requires more sophisticated logistics management and discipline to ensure shippers are returned and recycled, especially for international shipments, which many companies do not have in place.

Cryoport’s solutions are totally comprehensive and integrated for maximum reliability, economy and total effectiveness. Cryoport’s total logistics solution enables life sciences companies to utilize the superior liquid nitrogen dry vapor technology without having to make capital investments or developing in-house logistics expertise and systems by offering a complete solution which includes the cloud-based Cryoportal logistics management platform, the temperature monitoring system and the 24/7/365 logistics support. Cryoport allows the customer to outsource logistics and focus on its core competencies while maintaining visibility of all shipping related information.

Within our intended biotechnology and life sciences markets for Cryoport Express^® Shippers, there is limited known direct competition. We compete with liquid nitrogen and dry ice solutions by reason of the improved and integrated hardware and software technology in our products including our comprehensive logistics management software and through the use of our service enabled business model. The Cryoport Express^® Solution provides a simple and cost effective solution for the frozen or cryogenic transport of biotech and life sciences materials. The Cryoportal assist the management, scheduling and shipping of the Cryoport Express^® Shippers removing the burdens associated with other methods.

Traditional dry ice shippers and liquid nitrogen tank suppliers, such as MVE/Chart Industries, Taylor Wharton and Air Liquide, offer various models of dry vapor liquid nitrogen shippers that are not as cost efficient for multi-use and multi-shipment purposes due to their significantly greater unit costs and unit weight (which may substantially increase the shipping cost). On the other hand, they are more established and have larger organizations and have greater financial, operational, sales and marketing resources, have a broad manufactured product offering of other liquid nitrogen products and experience in research and development than we do.

Factors that we believe give us a competitive advantage are attributable to our software and shipping container which allows our shipper to retain liquid nitrogen when placed in non-upright positions, the overall “leak- proofness” of our package which determines compliance with shipping regulations and the overall weight and volume of the package which determines shipping costs, and our business model represented by the merged integration of our shipper with Cryoportal and Smart Pak datal ogger into a seamless shipping, tracking and monitoring solution.

Other companies that offer potentially competitive products include Industrial Insulation Systems, which offers cryogenic transport units and has partnered with Marathon Products Inc., a manufacturer and global supplier of wireless temperature data collecting devices used for documenting environmentally sensitive products through the cold chain and Kodiak Thermal Technologies, Inc. which offers, among other containers, a repeat use active-cool container that uses free piston stirling cycle technology. While not having their own shipping devices, BioStorage Technologies is potentially a competitive company through their management services offered for cold-chain logistics and long-term biomaterial storage. Cryogena offers a single use disposable LN2 shipper with better performance than dry ice, but it does not perform as well and is not as cost-effective as the Cryoport solution when all costs are considered. In addition, BioMatrica, Inc. is developing and offering technology that stabilizes biological samples and research materials at room temperature. They presently offer these technologies primarily to research and academic institutions; however, their technology may eventually enter the broader cold-chain market.

Research and Development

Our research and development efforts are focused on continually improving the features of our Cryoport Express^® Solutions including the cloud-based Cryoportal and the Cryoport Express^® Shippers. These efforts are expected to lead to the introduction of shippers of varying sizes based on market requirements, constructed of lower cost materials and utilizing high volume manufacturing methods that will make it practical to provide the cryogenic packages offered by the Cryoport Express^® System. Alternative phase change materials in place of liquid nitrogen may be used to increase the potential markets these shippers can serve such as ambient and 2-8°C markets. Our research and development expenditures for the fiscal years ended March 31, 2013 and 2012 were $425,446 and $491,849, respectively with the largest portion being spent on software maintenance and development.

Employees

As of June 17, 2013, we had seventeen full-time employees, one consultant and two temporary employees.

Insurance

We currently maintain general liability insurance, with coverage in the amount of $1 million per occurrence, subject to a $2 million annual limitation. Claims may be made against us that exceed these limits. In fiscal year 2013, we did not experience any claims against our professional liability insurance. Our liability policy is an “occurrence” based policy. Thus, our policy is complete when we purchased it and following cancellation of the policy it continues to provide coverage for future claims based on conduct that took place during the policy term. However, our insurance may not protect us against liability because our policies typically have various exceptions to the claims covered and also require us to assume some costs of the claim even though a portion of the claim may be covered. In addition, if we expand into new markets, we may not be aware of the need for, or be able to obtain insurance coverage for such activities or, if insurance is obtained, the dollar amount of any liabilities incurred could exceed our insurance coverage. A partially or completely uninsured claim, if successful and of significant magnitude, could have a material adverse effect on our business, financial condition and results of operations.

We also maintain product liability insurance with coverage in the amount of $1,000,000 per year. In addition, we currently maintain cargo insurance for shipments for one customer, with coverage of up to $10,000 per shipment.

This Annual Report on Form 10-K contains forward-looking information based on our current expectations. Because our actual results may differ materially from any forward-looking statements made by or on behalf of Cryoport, this section includes a discussion of important factors that could affect our actual future results, including, but not limited to, our potential product and service revenues, acceptance of our products and services, expenses, net income(loss) and earnings(loss) per common share.

Risks Related to Our Business

We have incurred significant losses to date and may continue to incur losses.

We have incurred net losses in each fiscal year since we commenced operations. The following table represents net losses incurred for each of our last two fiscal years:

As of March 31, 2013, we had an accumulated deficit of $66,311,448. While we expect to continue to derive revenues from our current products and services, in order to achieve and sustain profitable operations, we must successfully commercialize and launch our Cryoport Express^® solution, significantly expand our market presence and increase revenues. We may continue to incur losses in the future and may never generate revenues sufficient to become profitable or to sustain profitability. Continuing losses may impair our ability to raise the additional capital required to continue and expand our operations.

Our auditors have expressed doubt about our ability to continue as a going concern.

The Report of Independent Registered Public Accounting Firm to our March 31, 2013 consolidated financial statements includes an explanatory paragraph stating that the recurring losses and negative cash flows from operations since inception and our cash and cash equivalent balance at March 31, 2013 raise substantial doubt about our ability to continue as a going concern. The consolidated financial statements do not include any adjustments that might result from the outcome of this uncertainty.

If we are unable to obtain additional funding, we may have to reduce or discontinue our business operations.

As of June 17, 2013, we had cash and cash equivalents of $146,057. We have expended substantial funds developing and commercializing our Cryoport Express^® Solutions and for general operating expenses. As a result, we have historically experienced negative cash flows from operations and we expect to continue to experience negative cash flows from operations in the future. Therefore, our ability to continue and expand our operations is highly dependent on the amount of cash and cash equivalents on hand combined with our ability to raise additional capital to fund future operations.

We are currently funding our operations through short-term bridge financing and plan to raise additional funds through an equity or debt offering to cover general working capital needs and sales and marketing initiatives to expand our customer base and increase revenues. If we are not able to raise sufficient funds and our projected revenues and cash-inflows are reduced or delayed, we may not have sufficient capital to operate through the secondquarter of our fiscal year 2014 or beyond. We are currently exploring various arrangements with respect to securing additional funding. However, there can be no assurance that any additional financing on commercially reasonable terms, or at all, will be available when needed. The inability to obtain additional capital may reduce our ability to continue to conduct our business operations. Any additional equity financing will involve substantial dilution to our then existing stockholders. The uncertainties surrounding our future cash inflows have raised substantial doubt regarding our ability to continue as a going concern.

If we are not successful in establishing strategic relationships with global couriers, we may not be able to successfully increase revenues and cash flow which could adversely affect our operations.

We believe that establishing strategic relationships with global couriers, such as our agreements with FedEx and DHL can drive growth. Such relationships will enable us to provide a seamless, end-to-end shipping solution to customers and allow us to leverage the couriers’ established express, ground and freight infrastructures and penetrate new markets with minimal investment. Further, we expect that the global couriers will utilize their sales forces to promote and sell our frozen shipping services. If we are not successful in launching our relationship with FedEx or DHL or establishing additional relationships with global couriers, our sales and marketing efforts will be significantly impacted and anticipated revenue growth will be delayed which could adversely impact on our operations.

Our agreements with FedEx and DHL may not result in a significant increase in our revenues or cash flow.

In January 2013, we entered into a master agreement with FedEx , renewing FedEx’s right to on a non-exclusive basis, promote, market and sell transportation of our shippers and our related value-added goods and services and providing FedEx with a non-exclusive license and right to use a customized version of our Cryoportal for the management of shipments made by FedEx customers. Because our agreement with FedEx does not contain any requirement that FedEx lease a minimum number of shippers from us during the term of the agreement, we may not experience a significant increase in our revenues or cash flows as a result of this agreement. On September 2, 2010, we entered into an agreement with DHL that will give DHL life sciences customers direct access to our web-based order entry and tracking portal to order our Cryoport Express^® Shippers and preferred DHL shipping rates. Although the agreement provides shipping discounts that may be used to support our customers using our Cryoport Express^® Solution, DHL will not be promoting, marketing or selling transportation of our shippers or services, which may not lead to any increase in our revenues.

Current economic conditions and capital markets are in a period of disruption and instability which could adversely affect our ability to access the capital markets, and thus adversely affect our business and liquidity.

The current economic conditions and financial crisis have had, and will continue to have, a negative impact on our ability to access the capital markets, and thus have a negative impact on our business and liquidity. The shortage of liquidity and credit combined with substantial losses in worldwide equity markets could lead to an extended worldwide recession. We may face significant challenges if conditions in the capital markets do not improve and we do not achieve positive cash flow from operations. Our ability to access the capital markets may be severely restricted at a time when we need to access such markets, which could have a negative impact on our business plans, including the commercialization and launch of our Cryoport Express^® Solution and other research and development activities. Even if we are able to raise capital, it may not be at a price or on terms that are favorable to us. We cannot predict the occurrence of future financial disruptions or how long the current market conditions may continue.

The sale of substantial shares of our common stock may depress our stock price.

As of June 17, 2013, there were 38,260,628 shares of our common stock outstanding. Substantially all of these shares of common stock are eligible for trading in the public market. The market price of our common stock may decline if our stockholders sell a large number of shares of our common stock in the public market, or the market perceives that such sales may occur.

We could also issue up to 44,663,099 shares of our common stock including shares to be issued upon the exercise of outstanding warrants and options or reserved for future issuance under our stock incentive plans, as further described in the following table:

Of the total options and warrants outstanding as of March 31, 2013, options and warrants exercisable for an aggregate of 2,626,977 shares of common stock would be considered dilutive to the value of our stockholders’ interest in Cryoport because we would receive upon exercise of such options and warrants an amount per share that is less than the market price of our common stock on March 31, 2013.

We will have difficulty increasing our revenues if we experience delays, difficulties or unanticipated costs in establishing the sales, distribution and marketing capabilities necessary to successfully commercialize our products.

We are continuing to develop sales, distribution and marketing capabilities in the Americas, Europe and Asia. It will be expensive and time-consuming for us to develop a global marketing and sales network. Moreover, we may choose, or find it necessary, to enter into additional strategic collaborations to sell, market and distribute our products. We may not be able to provide adequate incentive to our sales force or to establish and maintain favorable distribution and marketing collaborations with other companies to promote our products. In addition, any third party with whom we have established a marketing and distribution relationship may not devote sufficient time to the marketing and sales of our products thereby exposing us to potential expenses in exiting such distribution agreements. We, and any of our third party collaborators, must also market our products in compliance with federal, state, local and international laws relating to the provision of incentives and inducements. Violation of these laws can result in substantial penalties. Therefore, if we are unable to successfully motivate and expand our marketing and sales force and further develop our sales and marketing capabilities, or if our distributors fail to promote our products, we will have difficulty increasing our revenues.

Our ability to grow and compete in our industry will be hampered if we are unable to retain the continued service of our key professionals or to identify, hire and retain additional qualified professionals.

A critical factor to our business is our ability to attract and retain qualified professionals including key employees and consultants. We are continually at risk of losing current professionals or being unable to hire additional professionals as needed. If we are unable to attract new qualified employees, our ability to grow will be adversely affected. If we are unable to retain current employees or strategic consultants, our financial condition and ability to maintain operations may be adversely affected.

We are dependent on new products and services, the lack of which would harm our competitive position.

Our future revenue stream depends to a large degree on our ability to bring new products and services to market on a timely basis. We must continue to make significant investments in research and development in order to continue to develop new products and services, enhance existing products and services, and achieve market acceptance of such products and services. We may incur problems in the future in innovating and introducing new products and services. Our development stage products and services may not be successfully completed or, if developed, may not achieve significant customer acceptance. If we are unable to successfully define, develop and introduce new, competitive products and services and enhance existing products and services, our future results of operations would be adversely affected. Development and manufacturing schedules for technology products and services are difficult to predict, and we might not achieve timely initial customer shipments of new products or launch of services. The timely availability of these products and services and their acceptance by customers are important to our future success. A delay in new or enhanced product or service introductions could have a significant impact on our results of operations.

Because of these risks, our research and development efforts may not result in any commercially viable products or services. If significant portions of these development efforts are not successfully completed, or any new or enhanced products or services are not commercially successful, our business, financial condition and results of operations may be materially harmed.

If we successfully develop products and/or services, but those products and/or services do not achieve and maintain market acceptance, our business will not be profitable.

The degree of acceptance of our Cryoport Express^® Solutions and/or Cryoport Express^® Shippers, or any future product or services, by our current target markets, and any other markets to which we attempt to sell our products and services, and our profitability and growth will depend on a number of factors including, among others:

If any products or services we may develop do not achieve market acceptance, then we may not generate sufficient revenue to achieve or maintain profitability.

In addition, even if our products and services achieve market acceptance, we may not be able to maintain that market acceptance over time if new products or services are introduced that are more favorably received than our products and services, are more cost effective, or render our products obsolete.

The product adoption cycle of our target customers tends to be very lengthy, which continues to adversely affect our ability to increase revenues.

We offer our solution primarily to companies in the life sciences industry. These companies operate within a heavily regulated environment and as such, changing vendors and distribution practices typically require a number of steps which may include the audit of our facilities, review of our procedures, qualifying us as a vendor, and performing test shipments. This process can take several months or longer to complete prior to a company fully adopting the Cryoport Express^® Solution. In addition, any such adoption may be on a gradual basis such that the customer progressively ramps up use of our Cryoport Express^® Solution following adoption. The slow adoption process continues to adversely affect our ability to increase revenues.

We are dependent on an outside party for the continued development of our Cryoportal

Our proprietary Cryoportal is a software system used by our customers and business partners to automate the entry of orders, prepare customs documentation and facilitate status and location monitoring of shipped orders while in transit. The continued development of this system is contracted with an outside software development company. If this developer becomes unable or unwilling to continue work on scheduled projects, and an alternative developer cannot be secured, we may not be able to implement needed enhancements to the system. Furthermore, if we terminate our agreement with this developer and cannot reach an agreement or fail to fulfill an agreement for the termination, we could lose our license to use this software. Failure to proceed with enhancements or the loss of our license for the system would adversely affect our ability to generate new business and serve existing customers, resulting in a reduction in revenue.

Our success depends, in part, on our ability to obtain patent protection for our products and business model, preserve our trade secrets, and operate without infringing the proprietary rights of others.

Our policy is to seek to protect our proprietary position by, among other methods, filing United States patent applications related to our technology, inventions and improvements that are important to the development of our business. We have three issued U.S. patents and one recently filed provisional patent application, all relating to various aspects of our products and services. Our patents or provisional patent application may be challenged, invalidated or circumvented in the future or the rights granted may not provide a competitive advantage. We intend to vigorously protect and defend our intellectual property. Costly and time-consuming litigation brought by us may be necessary to enforce our patents and to protect our trade secrets and know-how, or to determine the enforceability, scope and validity of the proprietary rights of others.

We also rely upon trade secrets, technical know-how and continuing technological innovation to develop and maintain our competitive position. In the past our employees, consultants, advisors and suppliers have not always executed confidentiality agreements and invention assignment and work for hire agreements in connection with their employment, consulting, or advisory relationships. Consequently, we may not have adequate remedies available to us to protect our intellectual property should one of these parties attempt to use our trade secrets or refuse to assign any rights he or she may have in any intellectual property he or she developed for us. Additionally, our competitors may independently develop substantially equivalent proprietary information and techniques or otherwise gain access to our proprietary technology, or we may not be able to meaningfully protect our rights in unpatented proprietary technology.

We cannot assure you that our current and potential competitors and other third parties have not filed (or in the future will not file) patent applications for (or have not received or in the future will not receive) patents or obtain additional proprietary rights that will prevent, limit or interfere with our ability to make, use or sell our products either in the United States or internationally. In the event we are required to license patents issued to third parties, such licenses may not be available or, if available, may not be available on terms acceptable to us. In addition, we cannot assure you that we would be successful in any attempt to redesign our products or processes to avoid infringement or that any such redesign could be accomplished in a cost-effective manner. Accordingly, an adverse determination in a judicial or administrative proceeding or failure to obtain necessary licenses could prevent us from manufacturing and selling our products or offering our services, which would harm our business.

We are not aware of any third party that is infringing any of our patents or trademarks nor do we believe that we are infringing on the patents or trademarks of any other person or organization.

Our products may contain errors or defects, which could result in damage to our reputation, lost revenues, diverted development resources and increased service costs and litigation.

Our products must meet stringent requirements and we must develop our products quickly to keep pace with the rapidly changing market. Products and services as sophisticated as ours could contain undetected errors or defects, especially when first introduced or when new models or versions are released. In general, our products may not be free from errors or defects after commercial shipments have begun, which could result in damage to our reputation, lost revenues, diverted development resources, increased customer service and support costs, and litigation. The costs incurred in correcting any product errors or defects may be substantial and could adversely affect our business, results of operations and financial condition.

If we experience manufacturing delays or interruptions in production, then we may experience customer dissatisfaction and our reputation could suffer.

If we fail to produce enough shippers at our own manufacturing facility or at a third party manufacturing facility, or if we fail to complete our shipper recycling processes as planned, we may be unable to deliver shippers to our customers on a timely basis, which could lead to customer dissatisfaction and could harm our reputation and ability to compete. We currently acquire various component parts for our shippers from various independent manufacturers in the United States. We would likely experience significant delays or cessation in producing our shippers if a labor strike, natural disaster or other supply disruption were to occur at any of our main suppliers. If we are unable to procure a component from one of our manufacturers, we may be required to enter into arrangements with one or more alternative manufacturing companies which may cause delays in producing our shippers. In addition, because we depend on third party manufacturers, our profit margins may be lower, which will make it more difficult for us to achieve profitability. To date, we have not experienced any material delay that has adversely impacted our operations. As our business develops and the quantity of production increases, it becomes more likely that such problems could arise.

Because we rely on a limited number of suppliers, we may experience difficulty in meeting our customers’ demands for our products in a timely manner or within budget.

We currently purchase key components of our products from a variety of outside sources. Some of these components may only be available to us through a few sources, however, management has identified alternative materials and suppliers should the need arise. We generally do not have long-term agreements with any of our suppliers. Consequently, in the event that our suppliers delay or interrupt the supply of components for any reason, we could potentially experience higher product costs and longer lead times in order fulfillment.

Our Cryoportal may be subject to intentional disruption that could adversely impact our reputation and future revenues.

We have implemented our Cryoportal which is used by our customers and business partners to automate the entry of orders, prepare customs documentation and facilitate status and location monitoring of shipped orders while in transit. Although we believe we have sufficient controls in place to prevent intentional disruptions, we could be a target of cyber attacks specifically designed to impede the performance of the Cryoportal. Similarly, experienced computer programmers may attempt to penetrate our Cryoportal in an effort to search for and misappropriate proprietary or confidential information or cause interruptions of our services. Because the techniques used by such computer programmers to access or sabotage networks change frequently and may not be recognized until launched against a target, we may be unable to anticipate these techniques. Our activities could be adversely affected and our reputation, brand and future sales harmed if these intentionally disruptive efforts are successful.

Our products and services may expose us to liability in excess of our current insurance coverage.

Our products and services involve significant risks of liability, which may substantially exceed the revenues we derive from them. We cannot predict the magnitude of these potential liabilities.

We currently maintain general liability insurance, with coverage in the amount of $1 million per occurrence, subject to a $2 million annual limitation, and product liability insurance with a $1 million annual coverage limitation. Claims may be made against us that exceed these limits.

Our liability policy is an “occurrence” based policy. Thus, our policy is complete when we purchased it and following cancellation of the policy it continues to provide coverage for future claims based on conduct that took place during the policy term. However, our insurance may not protect us against liability because our policies typically have various exceptions to the claims covered and also require us to assume some costs of the claim even though a portion of the claim may be covered. In addition, if we expand into new markets, we may not be aware of the need for, or be able to obtain insurance coverage for such activities or, if insurance is obtained, the dollar amount of any liabilities incurred could exceed our insurance coverage. A partially or completely uninsured claim, if successful and of significant magnitude, could have a material adverse effect on our business, financial condition and results of operations.

Complying with certain regulations that apply to shipments using our products can limit our activities and increase our cost of operations.

Shipments using our products and services are subject to various regulations in the countries in which we operate. For example, shipments using our products may be required to comply with the shipping requirements promulgated by the Centers for Disease Control (“CDC”), the Occupational Safety and Health Organization (“OSHA”), the Department of Transportation (“DOT”) as well as rules established by the International Air Transportation Association (“IATA”) and the International Civil Aviation Organization (“ICAO”). Additionally, our data logger may be subject to regulation and certification by the Food and Drug Administration (“FDA”), Federal Communications Commission (“FCC”), and Federal Aviation Administration (“FAA”). We will need to ensure that our products and services comply with relevant rules and regulations to make our products and services marketable, and in some cases compliance is difficult to determine. Significant changes in such regulations could require costly changes to our products and services or prevent use of our shippers for an extended period of time while we seek to comply with changed regulations. If we are unable to comply with any of these rule or regulations or fail to obtain any required approvals, our ability to market our products and services may be adversely affected. In addition, even if we are able to comply with these rules and regulations, compliance can result in increased costs. In either event, our financial results and condition may be adversely affected. We depend on our business partners and unrelated and frequently unknown third party agents in foreign countries to act on our behalf to complete the importation process and to make delivery of our shippers to the final user. The failure of these third parties to perform their duties could result in damage to the contents of the shipper resulting in customer dissatisfaction or liability to us, even if we are not at fault.

If we cannot compete effectively, we will lose business.

Our products, services and solutions are positioned to be competitive in the cold-chain logistics market. While there are technological and marketing barriers to entry, we cannot guarantee that the barriers we are capable of producing will be sufficient to defend the market share we wish to gain against current and future competitors. Our principal competitive considerations in our market include:

Current and prospective competitors have substantially greater resources, more customers, longer operating histories, greater name recognition and more established relationships in the industry. As a result, these competitors may be able to develop and expand their networks and product offerings more quickly, devote greater resources to the marketing and sale of their products and adopt more aggressive pricing policies. In addition, these competitors have entered and will likely continue to enter into business relationships to provide additional products competitive to those we provide or plan to provide.

We may not be able to compete with our competitors in the industry because many of them have greater resources than we do.

We expect to continue to experience significant and increasing levels of competition in the future. In addition, there may be other companies which are currently developing competitive products and services or which may in the future develop technologies and products that are comparable, superior or less costly than our own. For example, some cryogenic equipment manufacturers with greater resources currently have solutions for storing and transporting cryogenic liquid and gasses and may develop storage solutions that compete with our products. Additionally, some specialty couriers with greater resources currently provide dry ice transportation and may develop other products in the future, both of which compete with our products. A competitor that has greater resources than us may be able to bring its product to market faster than we can and offer its product at a lower price than us to establish market share. We may not be able to successfully compete with a competitor that has greater resources and such competition may adversely affect our business.

Risks Relating to Our Current Financing Arrangements

Certain of our existing stockholders own and have the right to acquire a substantial number of shares of common stock.

As of June 17, 2013, our directors, executive officers and beneficial owners of 5% or more of our outstanding common stock beneficially owned 9,365,085 shares of common stock (without regard to beneficial ownership limitations contained in certain warrants) assuming their exercise of all outstanding warrants, options or approximately 20.1% of our outstanding common stock. Of these shares of common stock, 2,857,139 shares, or approximately 7.0% of our common stock, will be beneficially owned by CNH Partners, LLC, and 2,500,428 shares, or approximately 6.2% of our outstanding common stock, will be beneficially owned by Emergent Financial Group (each calculated without regard to the shares of common stock that may be acquired by the other upon the exercise of its warrants and conversion of debt). As such, the concentration of beneficial ownership of our common stock may have the effect of delaying or preventing a change in control of Cryoport and may adversely affect the voting or other rights of other holders of our common stock.

Our stock and warrant price is and will continue to be volatile.

The market price of our common stock has been and, along with the warrants is likely to be, highly volatile and could fluctuate widely in price in response to various factors, many of which are beyond our control, including, but not limited to:

You may consider any one of these factors to be material. The price of our common stock and warrants may fluctuate widely as a result of any of the above listed factors. In addition, the securities markets have from time to time experienced significant price and volume fluctuations that are unrelated to the operating performance of particular companies. These market fluctuations may also materially and adversely affect the market price of our common stock and warrants.

If equity research analysts do not publish research or reports about our business or if they issue unfavorable commentary or downgrade our common stock and warrants, the price of our common stock and warrants could decline.

The trading market for our common stock and warrants relies in part on the research and reports that equity research analysts publish about us and our business. We do not control these analysts. The price of our common stock and warrants could decline if one or more equity analyst downgrades our stock or if analysts issue other unfavorable commentary or cease publishing reports about us or our business.

We have not paid dividends on our common stock in the past and do not expect to pay dividends in the foreseeable future. Any return on investment may be limited to the value of our common stock.

We have never paid cash dividends on our common stock and do not anticipate paying cash dividends in the foreseeable future. The payment of dividends on our common stock will depend on our earnings, financial condition and other business and economic factors affecting us at such time as the Board of Directors may consider the payment of any such dividends. If we do not pay dividends, our common stock may be less valuable because a return on your investment will only occur if the price of our common stock appreciates.

We need additional capital, and the sale of additional shares of common stock or other equity securities could result in additional dilution to our stockholders.

Our current cash and cash equivalents and anticipated cash flow from operations are insufficient to meet our cash needs. We require additional cash resources to fund our operations and may require additional funds in the future due to changed business conditions or other future developments, including any investments or acquisitions we may decide to pursue. The sale of additional equity securities, or debt securities convertible into equity securities, could result in additional dilution to our stockholders. The incurrence of indebtedness would result in increased debt service obligations and could result in operating and financing covenants that would restrict our operations.

Our Articles of Incorporation allows our Board of Directors to issue up to 2,500,000 shares of “blank check” preferred stock.

Our Articles of Incorporation allows our Board of Directors to issue up to 2,500,000 shares of “blank check” preferred stock, without action by our stockholders. Such shares of preferred stock may be issued on terms determined by our Board of Directors, and may have rights, privileges and preferences superior to those of our common stock. Without limiting the foregoing, (i) such shares of preferred stock could have liquidation rights that are senior to the liquidation preference applicable to our common stock, (ii) such shares of preferred stock could have voting or conversion rights, which could adversely affect the voting power of the holders of our common stock and (iii) the ownership interest of holders of our common stock will be diluted following the issuance of any such shares of preferred stock. In addition the issuance of such shares of blank check preferred stock could have the effect of discouraging, delaying or preventing a change of control of our Company.

Provisions in our bylaws and Nevada law might discourage, delay or prevent a change of control of our Company or changes in our management and, as a result, may depress the trading price of our common stock.

Provisions of our bylaws and Nevada law may discourage, delay or prevent a merger, acquisition or other change in control that stockholders may consider favorable, including transactions in which you might otherwise receive a premium for your shares of our common stock. The relevant bylaw provisions may also prevent or frustrate attempts by our stockholders to replace or remove our management. These provisions include advance notice requirements for stockholder proposals and nominations, and the ability of our Board of Directors to make, alter or repeal our bylaws.

Absent approval of our Board of Directors, our bylaws may only be amended or repealed by the affirmative vote of the holders of at least a majority of our outstanding shares of capital stock entitled to vote.

In addition, Section 78.438 of the Nevada Revised Statutes prohibits a publicly-held Nevada corporation from engaging in a business combination with an interested stockholder (generally defined as a person which together with its affiliates owns, or within the last three years has owned, 10% of our voting stock, for a period of three years after the date of the transaction in which the person became an interested stockholder) unless the business combination is approved in a prescribed manner.

The existence of the foregoing provisions and other potential anti-takeover measures could limit the price that investors might be willing to pay in the future for shares of our common stock. They could also deter potential acquirers of our Company, thereby reducing the likelihood that you could receive a premium for your common stock in an acquisition.

Even though we are not incorporated in California, we may become subject to a number of provisions of the California General Corporation Law.

Section 2115(b) of the California Corporations Code imposes certain requirements of California corporate law on corporations organized outside California that, in general, are doing more than 50% of their business in California and have more than 50% of their outstanding voting securities held of record by persons residing in California. While we are not currently subject to Section 2115(b), we may become subject to it in the future.

The following summarizes some of the principal differences which would apply if we become subject to Section 2115(b).

Under both Nevada and California law, cumulative voting for the election of directors is permitted. However, under Nevada law cumulative voting must be expressly authorized in the Articles of Incorporation and our Amended and Restated Articles of Incorporation do not authorize cumulative voting. If we become subject to Section 2115(b), we may be required to permit cumulative voting if any stockholder properly requests to cumulate his or her votes.

Under Nevada law, directors may be removed by the stockholders only by the vote of two-thirds of the voting power of the issued and outstanding stock entitled to vote. However, California law permits the removal of directors by the vote of only a majority of the outstanding shares entitled to vote. If we become subject to Section 2115(b), the removal of a director may be accomplished by a majority vote, rather than a vote of two-thirds, of the stockholders entitled to vote.

Under California law, the corporation must take certain steps to be allowed to provide for greater indemnification of its officers and directors than is provided in the California Corporation Code. If we become subject to Section 2115(b), our ability to indemnify our officers and directors, to the extent permitted in our Articles of Incorporation, Bylaws and under Nevada law, may be limited by California law.

Nevada law permits distributions to stockholders as long as, after the distribution, (i) the corporation would be able to pay its debts as they become due and (ii) the corporation’s total assets are at least equal to its liabilities and preferential dissolution obligations. Under California law, distributions may be made to stockholders as long as the corporation would be able to pay its debts as they mature and either (i) the corporation’s retained earnings equals or exceeds the amount of the proposed distributions, or (ii) after the distributions, the corporation’s tangible assets are at least 125% of its liabilities and the corporation’s current assets are at least equal to its current liabilities (or, 125% of its current liabilities if the corporation’s average operating income for the two most recently completed fiscal years was less than the average of the interest expense of the corporation for those fiscal years). If we become subject to Section 2115(b), we will have to satisfy more stringent financial requirements to be able to pay dividends to our stockholders. Additionally, stockholders may be liable to the corporation if we pay dividends in violation of California law.

California law permits a corporation to provide “supermajority vote” provisions in its Articles of Incorporation, which would require specific actions to obtain greater than a majority of the votes, but not more than 66 ²/₃ percent. Nevada law does not permit supermajority vote provisions. If we become subject to Section 2115(b), it is possible that our stockholders would vote to amend our Articles of Incorporation and require a supermajority vote for us to take specific actions.

Under California law, in a disposition of substantially of all the corporation’s assets, if the acquiring party is in control of or under common control with the disposing corporation, the principal terms of the sale must be approved by 90 percent of the stockholders. Although Nevada law does contain certain rules governing interested stockholder business combinations, it does not require similar stockholder approval. If we become subject to Section 2115(b), we may have to obtain the vote of a greater percentage of the stockholders to approve a sale of our assets to a party that is in control of, or under common control with, us.

California law places certain additional approval rights in connection with a merger if all of the shares of each class or series of a corporation are not treated equally or if the surviving or parent party to a merger represents more than 50 percent of the voting power of the other corporation prior to the merger. Nevada law does not require such approval. If we become subject to Section 2115(b), we may have to obtain a the vote of a greater percentage of the stockholders to approve a merger that treats shares of a class or series differently or where a surviving or parent party to the merger represents more than 50% of the voting power of the other corporation prior to the merger.

California law requires the vote of each class to approve a reorganization or a conversion of a corporation into another entity. Nevada law does not require a separate vote for each class. If we become subject to Section 2115(b), we may have to obtain the approval of each class if we desire to reorganize or convert into another type of entity.

California law provides greater dissenters’ rights to stockholders than Nevada law. If we become subject to Section 2115(b), more stockholders may be entitled to dissenters’ rights, which may limit our ability to merge with another entity or reorganize.

Our stock is deemed to be penny stock.

Our stock is currently traded on the OTCQB, operated by the OTC Markets Group, Inc., and is subject to the “penny stock rules” adopted pursuant to Section 15(g) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). The penny stock rules apply to companies not listed on a national exchange whose common stock trades at less than $5.00 per share or which have tangible net worth of less than $5,000,000 ($2,000,000 if the company has been operating for three or more years). Such rules require, among other things, that brokers who trade “penny stock” to persons other than “established customers” complete certain documentation, make suitability inquiries of investors and provide investors with certain information concerning trading in the security, including a risk disclosure document and quote information under certain circumstances. Penny stocks sold in violation of the applicable rules may entitle the buyer of the stock to rescind the sale and receive a full refund from the broker.

Many brokers have decided not to trade “penny stock” because of the requirements of the penny stock rules and, as a result, the number of broker-dealers willing to act as market makers in such securities is limited. In the event that we remain subject to the “penny stock rules” for any significant period, there may develop an adverse impact on the market, if any, for our securities. Because our securities are subject to the “penny stock rules,” investors will find it more difficult to dispose of our securities. Further, for companies whose securities are traded in the OTC Bulletin Board, it is more difficult: (i) to obtain accurate quotations, (ii) to obtain coverage for significant news events because major wire services, such as the Dow Jones News Service, generally do not publish press releases about such companies, and (iii) to obtain needed capital.

If we fail to maintain effective internal controls over financial reporting, the price of our common stock may be adversely affected.

Our internal controls over financial reporting may have weaknesses and conditions that could require correction or remediation, the disclosure of which may have an adverse impact on the price of our common stock. We are required to establish and maintain appropriate internal controls over financial reporting. Failure to establish those controls (or any failure of those controls once established) could adversely impact our public disclosures regarding our business, financial condition or results of operations. In addition, management’s assessment of internal controls over financial reporting may identify weaknesses and conditions that need to be addressed in our internal controls over financial reporting or other matters that may raise concerns for investors. Any actual or perceived weaknesses and conditions that need to be addressed in our internal control over financial reporting and disclosure of management’s assessment of our internal controls over financial reporting may have an adverse impact on the price of our common stock.

Standards for compliance with Section 404 of the Sarbanes-Oxley Act of 2002 are uncertain, and if we fail to comply in a timely manner, our business could be harmed and our stock price could decline.

Rules adopted by the SEC pursuant to Section 404 of the Sarbanes-Oxley Act of 2002 require an annual assessment of our internal controls over financial reporting. The standards that must be met for management to assess the internal controls over financial reporting as effective are evolving and complex, and require significant documentation, testing, and possible remediation to meet the detailed standards. We expect to continue to incur significant expenses and to devote resources to continued Section 404 compliance on an ongoing basis. It is difficult for us to predict how long it will take or how costly it will be to complete the assessment of the effectiveness of our internal controls over financial reporting and to remediate any deficiencies in our internal controls. As a result, we may not be able to complete the assessment and remediation process on a timely basis. In the event that our Chief Executive Officer or Chief Financial Officer determine that our internal controls over financial reporting are not effective as defined under Section 404, we cannot predict how regulators will react or how the market price of our common stock will be affected; however, we believe that there is a risk that investor confidence and share value may be negatively impacted.

If we fail to remain current in our reporting requirements, our securities could be removed from the OTC Bulletin Board, which would limit the ability of broker-dealers to sell our securities and the ability of stockholders to sell their securities in the secondary market.

Companies trading on the OTCQB must be reporting issuers under Section 12 of the Exchange Act, and must be current in their reports under Section 13, in order to maintain price quotation privileges on the OTC Bulletin Board. If we fail to remain current on our reporting requirements, we could be removed from the OTC Bulletin Board. As a result, the market liquidity for our securities could be severely adversely affected by limiting the ability of broker-dealers to sell our securities and the ability of stockholders to sell their securities in the secondary market.

Not applicable.

We do not own real property. We currently lease two facilities, with approximately 12,000 square feet of corporate, research and development, and warehouse facilities, located in Lake Forest, California (“Lake Forest Facility”) and approximately 4,100 square feet of corporate offices located in San Diego, California (“San Diego Facility”). In June 2010, the Company entered into a third amendment to the Lake Forest Facility lease and extended the lease for sixty months commencing July 1, 2010 with a right to cancel the lease with a minimum of 120 day written notice at any time after December 31, 2012. On November 28, 2011, the Company entered into a lease agreement for the corporate offices in San Diego for a thirty six month period ending December 31, 2014.

The Company currently makes base lease payments of approximately $17,000 per month, due at the beginning of each month. We believe that these facilities are adequate, suitable and of sufficient capacity to support our immediate needs. Additional space may be required, however, as we expand our research and development, manufacturing and selling and marketing activities.

In the ordinary course of business, we are at times subject to various legal proceedings and disputes, including product liability claims. We currently are not aware of any such legal proceedings or claim that we believe will have, individually or in the aggregate, a material adverse effect on our business, operating results or cash flows. It is our practice to accrue for open claims based on our historical experience and available insurance coverage.

Not applicable.

PART II

Market Information

(a) Market Information. Presently, our common stock is quoted on the OTCQB, operated by the OTC Markets Group, Inc. under the symbol CYRX. On June 17, 2013, the last reported sale of our common stock was $0.24. The following table shows the high and low sales price of our common stock for the two fiscal years ended March 31, 2013 and 2012.

(b) Holders. As of June 17, 2013, the number of stockholders of record of the Company’s common stock was 146.

(c) Dividends. No dividends on common stock have been declared or paid by the Company. The Company intends to employ all available funds for the development of its business and, accordingly, does not intend to pay any cash dividends in the foreseeable future.

(d) Securities Authorized for Issuance Under Equity Compensation. The information included under Item 12 of Part III of this Annual Report is hereby incorporated by reference into this Item 5 of Part II of this Annual Report.

(e) Recent Sale of Unregistered Securities. The following is a summary of transactions by the Company during period covered by this report involving the issuance and sale of the Company’s securities that were not registered under the Securities Act of 1933, as amended (the “Securities Act”) and that have not previously been included in a Quarterly Report on Form 10-Q or in a Current Report on Form 8-K. All securities sold by the Company were sold to individuals, trusts or others who were accredited investors as defined under Regulation D under the Securities Act, as amended.

In the fourth quarter of fiscal 2013, the Company issued to certain accredited investors unsecured convertible promissory notes (the “Bridge Notes”) in the original principal amount of $1,294,500. The Bridge Notes accrue interest at a rate of 15% per annum from date of issuance until January 31, 2013 and at a rate of 5% per annum from February 1, 2013 through the date of payment, in each case on a non-compounding basis. All principal and interest under the Bridge Notes will be due on December 31, 2013. In the event the Company designated and issued preferred stock while the Bridge Notes were outstanding, the Bridge Notes were convertible into shares of such preferred stock at a conversion rate equal to the price per share paid to the Company in connection with the issuance of such preferred stock at the option of the holder of the Bridge Notes.

Effective on April 19, 2013, the Company amended the Bridge Notes whereby in the event that the Company issues one or more types of equity securities (a “Transaction”) before the maturity of the Bridge Notes, the holder may elect to convert all or a portion of the principal and accrued interest into shares of such equity securities issued in a Transaction at a conversion rate equal to the price per share paid to the Company in connection with the issuances. The Company is required to notify the holder of a Transaction within 10 days of each Transaction and the holder has the option until the later of (a) ten (10) days after such notices or (b) December 15, 2013 to elect in writing to convert.

In April 2012, the Company issued a warrant to purchase 30,000 shares of the Company’s common stock at an exercise price of $0.50 per share to a consultant for services rendered to the Company.

The following selected financial data has been derived from audited consolidated financial statements of the Company for each of the five years in the period ended March 31, 2013. These selected financial summaries should be read in conjunction with the financial information contained for each of the two years in the period ended March 31, 2013, included in the consolidated financial statements and notes thereto, Management’s Discussion and Analysis of Results of Operations and Financial Condition, and other information provided elsewhere herein.

Years Ended March 31,

(in thousands, except per share data)

As of March 31,

(in thousands)

This Annual Report on Form 10-K contains forward-looking statements that have been made pursuant to the provisions of the Private Securities Litigation Reform Act of 1995 and concern matters that involve risks and uncertainties that could cause actual results to differ materially from those projected in the forward-looking statements. Discussions containing forward-looking statements may be found in the material set forth under “Business,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and in other sections of this Form 10-K. Words such as “may,” “will,” “should,” “could,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “predict,” “potential,” “continue” or similar words are intended to identify forward-looking statements, although not all forward-looking statements contain these words. Although we believe that our opinions and expectations reflected in the forward-looking statements are reasonable as of the date of this Annual Report on Form 10-K, we cannot guarantee future results, levels of activity, performance or achievements, and our actual results may differ substantially from the views and expectations set forth in this Annual Report on Form 10-K. We expressly disclaim any intent or obligation to update any forward-looking statements after the date hereof to conform such statements to actual results or to changes in our opinions or expectations. Readers are urged to carefully review and consider the various disclosures made by us, which attempt to advise interested parties of the risks, uncertainties, and other factors that affect our business, set forth in detail in Item 1A of Part I, under the heading “Risk Factors.”

The following discussion and analysis should be read in conjunction with our consolidated financial statements and the related notes to those statements contained elsewhere in this Annual Report on Form 10-K.

General Overview

We provide leading edge frozen shipping logistics solutions to the biotechnology and life science industries. Since 2008, through the combination of purpose-built proprietary hardware and software technologies and logistics knowhow known as “total turnkey management” we have provided total logistics management to the biotechnology and life sciences industries. Our solutions are disruptive to “old technologies” and provide reliable, economic alternatives to currently existing products and services utilized for frozen shipping in biotechnology and life sciences including stem cells, cell lines, vaccines, diagnostic materials, semen and embryos for in-vitro fertilization, cord blood, bio-pharmaceuticals, infectious substances and other items that require continuous exposure to frozen or cryogenic temperatures. In addition, our solutions can contribute to the reliability, efficiency, and effectiveness of clinical trials.

Cryoport Express^® Solutions include a cloud-based logistics management software branded as the Cryoportal^TM. The Cryoportal supports the management of the entire shipment process through a single interface which includes initial order input, document preparation, customs clearance, courier management, shipment tracking, issue resolution, and delivery. Cryoport’s total turnkey logistics solutions offer reliability, cost effectiveness, and convenience, while the use of recyclable and reusable components provides “green”, environmentally friendly solutions. The Cryoportal provides an array of unique information dashboards and validation documentation for each and every shipment.

Integral to our logistics solutions are the Cryoport Liquid Nitrogen Dry Vapor Shippers (Cryoport Express^® Shippers) which are cost-effective and reusable cryogenic transport containers (patented vacuum flasks) utilizing innovative liquid nitrogen (LN2) “dry vapor” technology. Cryoport Express^® Shippers are non-hazardous, IATA (International Air Transport Association) certified, and validated to maintain stable temperatures below minus 150° Celsius for a 10-plus day dynamic shipment period. The Company currently features two Cryoport Express^® Shipper models, the Standard Dry Shipper (holding up to approximately 75-2.0 ml vials) and the High Volume Dry Shipper (holding up to approximately 500-2.0 ml vials).

Cryoport Express^® Solutions include recording and retaining a fully documented “chain-of-custody” and, at the client’s option, “chain-of-condition” for every shipment, helping ensure that quality, safety, efficacy, and stability of shipped commodities are maintained. This recorded and archived information allows our customers to meet the exacting requirements necessary for scientific work and for regulatory purposes. Cryoport Express^® Solutions can be used by customers, as a “turnkey” solution, through direct access to the cloud-based Cryoportal, or by contacting Cryoport client Care for order entry tasks. Cryoport provides 24/7/365 logistics services through its Client Care team and also provides complete training and process management services to support each client’s specific requirements.

Since 2010, Cryoport Express^® Solutions have been the Company’s principal focus for development and commercialization. During fiscal year 2013, the Company approach to the market was adjusted to a solutions orientation and it expanded its service offering to address specific market needs in the biotechnology and life science industries. As a solutions provider, Cryoport tailors frozen logistics solutions to client requirements. In addition to custom solutions, the Company’s primary customer facing solutions offerings are as follows:

The fully outsourced turnkey logistics solution described herein.

Cryoport ships an inventory of Cryoport Express^® Shippers to the customer (uncharged and in bulk) enabling the customer to charge the shippers at their facility, process their orders through the Cryoportal which permits Cryoport Client Care to oversee the each shipment and the return the shippers to Cryoport for cleaning, testing and refurbishing. Cryoport Client Care provides the 24/7/365 logistics services utilizing its Cryoportal logistics platform.

Cryoport ships a fully charged Cryoport Express^® Shipper(s) to the customer enabling the customer to utilize its internal expertise to manage all or a portion of the logistics services. As with the above solutions, the shippers are returned to Cryoport for cleaning, testing and refurbishing within a pre-determined time period.

The Cryoport logistics team provides a tailored and full range of logistics support solutions. In addition to tailoring a management solution, the robust, enterprise grade Cryoportal is used to provide complete logistics services while enabling the customer to utilize their own packaging solutions or Cryoport Express^® Shippers. Cryoport can provide onsite logistics personnel allowing the customer to fully outsource their cold chain logistics needs to Cryoport and focus on its core competencies.

“Powered by Cryoport” is an important partnership arrangements with integrators, freight forwarders and other logistics providers, enabling partners to expand their solutions offering by adding the total Cryoport Express^® Shipper solution to their customer offering.

We offer our solutions to companies in the biotechnology and life sciences industries and specific verticals including manufacturers of stem cells and cell lines, diagnostic laboratories, bio-pharmaceuticals, in-vitro fertilization, cord blood, vaccines, tissue, animal husbandry, and other producers of commodities requiring reliable frozen solutions for logistics problems.

These companies operate within heavily regulated environments and as such, changing vendors and distribution practices typically require a number of steps, which may include the audit of our facilities, review of our procedures, qualifying us as a vendor, and performing test shipments. This process can take up to nine to eighteen months or longer to complete prior to a potential customer adopting Cryoport Express^® Solutions.

Going Concern

As reported in the Report of Independent Registered Public Accounting Firm to our March 31, 2013 and 2012 consolidated financial statements, we have incurred recurring losses and negative cash flows from operations since inception. These factors, among others, raise substantial doubt about our ability to continue as a going concern.

There are significant uncertainties, which may negatively affect our operations. These are principally related to (i) the expected ramp up of revenues of Cryoport Express^® Solutions, (ii) the lack of firm purchasing commitments from our customers due to the on-demand nature of our business, (iii) the success in bringing additional products to market in response to customer demands, and (iv) risks associated with scaling company operations to meet demand. Moreover, there is no assurance as to when, if ever, we will be able to conduct our operations on a profitable basis. Our limited historical revenues for our reusable product, limited revenues to date of our Cryoport Express^® Solutions and the lack of any purchase requirements in our existing distribution agreements, make it difficult to identify any trends in our business prospects.

While we increased revenue year-over-year by 98% to $1.1 million for the fiscal year ended March 31, 2013, our revenue is still significantly lower than our operating expenses during the year and we have no assurance of the level of future revenues. We incurred a net loss of $6.4 million and used cash of $4.8 million in our operating activities during the year ended March 31, 2013. We had negative working capital of $1.5 million, and had cash and cash equivalents of $0.6 million at March 31, 2013.

We currently fund our operations through short-term bridge financing (see Note 8 of the notes to the consolidated financial statements) and plan to raise additional funds through an equity offering to cover general working capital needs and sales and marketing initiatives to expand our customer base and increase sales. There is no assurance that funds can be secured or if these funds would allow us to continue our operations until more significant revenues can be generated or more funding can be secured. These matters raise substantial doubt about our ability to continue as a going concern.

Results of Operations

The following table sets forth, for the periods indicated, certain information derived from our consolidated statements of operations.

Years ended March 31, 2013 and 2012:

Revenues. Revenues were $1,100,539 for the year ended March 31, 2013, as compared to $555,637 for the year ended March 31, 2012. The $544,902 or 98.1% increase is primarily driven by an increase in the number of customers utilizing our services as well as an increase in volume of certain customers compared to the prior year. We generated revenues from customers in all of our target life sciences markets, such as biotech and diagnostic companies, pharmaceutical companies, central laboratories, contract research organizations, the reproductive medicine market/in vitro fertilization market, and research institutions. Five customers generated in excess of $50,000 in revenues during fiscal 2013 compared to only two customers in the prior year. The number of customers that shipped multiple times during the year more than doubled, compared the prior year. The increase in revenues is partially the result of positive responses to targeted telemarketing activities and email marketing campaigns to the in-vitro-fertilization/reproductive medicine market to broaden the awareness of our solution in this space. In addition, the increase in revenues was also due, in part, to the commencement of the implementation of our first customer integrated solution in February of 2013, whereby we were engaged to manage shipments of a specific vaccine from the manufacturing site in the United States to both, domestic customers and international distribution centers.

Gross loss and cost of revenues. Gross loss for the year ended March 31, 2013 was 44% of revenues, or $487,284, as compared to 151% of revenues, or $836,823, for the prior year. Cost of revenues for the year ended March 31, 2013 was 144% of revenues, or $1,587,823 as compared to 251% of revenues, or $1,392,460, for the prior year. Our cost of revenues are primarily comprised of freight charges, payroll and related expenses related to our operations center in California, third-party charges for our European and Asian operations centers in Holland and Singapore, depreciation expenses of our Cryoport Express® Shippers and supplies and consumables used for our solutions. The increase in cost of revenues is primarily due to freight charges from the growth in shipments. The cost of revenues exceeded revenues due to fixed costs and plant underutilization.

Selling, general and administrative expenses. Selling, general and administrative expenses were $5,411,728 for the year ended March 31, 2013, as compared to $6,106,006 for the prior year. The $694,278 decrease reflects the decrease in consulting expenses, headcount, in particular a temporary decrease in the sales and marketing department due to the replacement of certain sales representatives, and the resignation of our Chief Executive Officer in April 2012, who was not replaced until November 2012, partly offset by stock-based compensation expenses for stock option grants issued to three members of the Company’s board of directors as compensation for their services as members of the Office of the Chief Executive Officer during that interim period.

Research and development expenses. Research and development expenses were $425,446 for the year ended March 31, 2013, as compared to $491,849 for the prior year. Our research and development efforts are focused on continually improving the features of the Cryoport Express^® Solution, with the primary focus on further expanding the capabilities of our cloud-based logistics management platform, the Cryoportal^TM. We use an outside software development company to provide these services.

Interest expense. Interest expense was $72,861 for the year ended March 31, 2013, as compared to $527,753 for the prior year. Interest expense for the year ended March 31, 2013 included, stated interest expense on the convertible debt of $13,018, amortization of the debt discount and deferred financing costs of $17,514, and accrued interest on our related party notes payable of $42,216. Interest expense for the prior 2012 included the value on warrants issued to convertible debt holders of $156,999, stated interest expense on the convertible debt of $122,824, amortization of the debt discount of $197,225, and accrued interest on our related party notes payable of $48,036.

Interest income. Interest income was zero for the year ended March 31, 2013 as compared to $11,940 for the prior year.

Change in fair value of derivative liabilities. The gain on the change in fair value of derivative liabilities was $16,486 for the year ended March 31, 2013, compared to a gain of $119,163 for the prior year. The gain for the year ended March 31, 2013 was the result of a decrease in the value of our warrant derivatives, due primarily to a decrease in our stock price.

Net loss. As a result of the factors described above, net loss for the year ended March 31, 2013 decreased by $1,450,495 to $6,382,433 or ($0.17) per share compared to a net loss of $7,832,928 or ($0.27) per share for the prior year. The decrease of net loss per share compared to the prior year is a result of the decrease in the net loss as described above and the increase in the weighted average common shares outstanding from 29.0 million to 37.8 million. This increase is primarily due to common stock issued in connection with the Company’s private placements late in fiscal 2012.

Liquidity and Capital Resources

As of March 31, 2013, the Company had cash and cash equivalents of $563,104 and negative working capital of $1,539,103. As of March 31, 2012, the Company had cash and cash equivalents of $4,617,535 and working capital of $4,024,120. Historically, we have financed our operations primarily through sales of our debt and equity securities. From March 2005 through March 2013, we have received net proceeds of approximately $34.1 million from sales of our common stock and the issuance of promissory notes, warrants and debt.

For the year ended March 31, 2013, we used $4,785,144 of cash for operations primarily as a result of the net loss of $6,382,433 including non-cash expenses of $693,180 for the fair value of stock options and warrants. Net operating losses decreased as a result of a decrease in headcount. Offsetting the cash impact of our net operating loss (excluding non-cash items) was an increase in accounts payable and accrued expenses of $443,562. Net cash used in operating activities also was offset by $2,525 for other working capital uses.

Net cash used in investing activities totaled $178,682 during the year ended March 31, 2013, and was attributable to the purchase of property and equipment of $156,200 and the purchase of intangible assets of $22,482.

Net cash provided by financing activities totaled $909,395 during the year ended March 31, 2013, and resulted primarily from net proceeds received from issuance of convertible debt during the fourth quarter of fiscal 2013 in the amount of $1,294,500. This was partially offset by the payment of financing costs of $206,305, repayment of related party notes of $96,000 and repayment of convertible debt of $82,800.

As discussed in Note 1 of the accompanying consolidated financial statements, there exists substantial doubt regarding the Company’s ability to continue as a going concern. As discussed above, the Company completed a private placement in March of 2012 and received proceeds from issuance of convertible debt as bridge financing in the fourth quarter of fiscal 2013. The funds raised are being used for working capital purposes and to continue our sales efforts to advance the Company’s commercialization of the Cryoport Express^® Solutions. As discussed in Note 16 of the accompanying audited consolidated financial statements, the Company issued additional unsecured convertible promissory notes in principal amount of $608,751 in the first quarter of fiscal 2014. However, the Company’s management recognizes that the Company will need to obtain additional capital to fund its operations and until sustained profitable operations are achieved. Management is currently working on such funding alternatives in order to secure sufficient operating capital through the end of fiscal year 2014. In addition, management will continue to review its operations for further cost reductions to extend the time that the Company can operate with its current cash on hand and additional bridge financing and to utilize third parties for services such as its international recycling and refurbishment centers to provide for greater flexibility in aligning operational expenses with the changes in sales volumes.

Additional funding plans may include obtaining additional capital through equity and/or debt funding sources; however, no assurance can be given that additional capital, if needed, will be available when required or upon terms acceptable to the Company.

Contractual Obligations

The following table summarizes our contractual obligations as of March 31, 2013, and the effects such obligations are expected to have on liquidity and cash flow in future periods (in thousands):

Impact of Inflation. From time to time, Cryoport experiences price increases from third party manufacturers and these increases cannot always be passed on to Cryoport’s customers. While these price increases have not had a material impact on CryoPort’s historical operations or profitability in the past, they could affect revenues in the future.

Critical Accounting Policies and Estimates

Management’s discussion and analysis of financial condition and results of operations, as well as disclosures included elsewhere in this Annual Report, are based upon our consolidated financial statements, which have been prepared in accordance with U.S. generally accepted accounting principles. Our significant accounting policies are described in the notes to the audited consolidated financial statements contained elsewhere in this Annual Report. Included within these policies are our “critical accounting policies.” Critical accounting policies are those policies that are most important to the preparation of our consolidated financial statements and require management’s most subjective and complex judgment due to the need to make estimates about matters that are inherently uncertain. Although we believe that our estimates and assumptions are reasonable, actual results may differ significantly from these estimates. Changes in estimates and assumptions based upon actual results may have a material impact on our results of operations and/or financial condition.

We believe that the critical accounting policies that most impact the consolidated financial statements are as described below.

Revenue Recognition

Per Use Revenues

We provide shipping containers to our customers and charge a fee in exchange for the use of the container. Our arrangements are similar to the accounting standard for leases since we convey the right to use the containers over a period of time. We retain title to the containers and provide our customers the use of the container for a specified shipping cycle. At the culmination of the customer’s shipping cycle, the container is returned to us.

We recognize revenue for the use of the shipper at the time of the delivery of the shipper to the end user of the enclosed materials, and at the time that collectability is reasonably certain. Revenue is based on gross net of discounts and allowances.

We also provide logistics support and management to some customers, which may include onsite logistics personnel. Revenue is recognized for these services as services are rendered and at the time that collectability is reasonably certain.

Inventory

The Company writes down its inventories for estimated obsolescence or unmarketable inventory equal to the difference between the cost of inventory and the estimated market value based upon assumptions about future demand, future pricing and market conditions. Inventory reserve costs are subject to estimates made by the Company based on historical experience, inventory quantities, age of inventory and any known expectations for product changes. If actual future demands, future pricing or market conditions are less favorable than those projected by management, additional inventory write-downs may be required and the differences could be material. Such differences might significantly impact cash flows from operating activities. Once established, write-downs are considered permanent adjustments to the cost basis of the obsolete or unmarketable inventories.

Our business plan focuses on per-use leasing of the shipping container and value-added services that will be used by us to provide an end-to-end and cost-optimized shipping solution. We provide shipping containers to our customers and charge a fee in exchange for the use of the container. Our arrangements are similar to the accounting standard for leases since we convey the right to use the containers over a period of time. We retain title to the containers and provide our customers the use of the container for a specified shipping cycle. At the culmination of the customer’s shipping cycle, the container is returned to us. The Company’s current inventory consists of accessories that are sold and shipped to customers along with loaned containers and not returned to the Company with the containers at the culmination of the customer’s shipping cycle.

Property and Equipment

Property and equipment are stated at cost, net of accumulated depreciation and amortization. Depreciation and amortization of fixed assets are provided using the straight-line method over the following useful lives:

Betterments, renewals and extraordinary repairs that extend the lives of the assets are capitalized; other repairs and maintenance charges are expensed as incurred. The cost and related accumulated depreciation and amortization applicable to assets retired are removed from the accounts, and the gain or loss on disposition is recognized in current operations.

Intangible Assets

Intangible assets comprise patents and trademarks and software development costs. The Company capitalizes costs of obtaining patents and trademarks which are amortized, using the straight-line method over their estimated useful life of five years. The Company capitalizes certain costs related to software developed for internal use. Software development costs incurred during the preliminary or maintenance project stages are expensed as incurred, while costs incurred during the application development stage are capitalized and amortized using the straight-line method over the estimated useful life of the software, which is five years. Capitalized costs include purchased materials and costs of services including the valuation of warrants issued to consultants.

Long-Lived Assets

The Company assesses the recoverability of its long-lived assets by determining whether the depreciation and amortization of long-lived assets over their remaining lives can be recovered through projected undiscounted cash flows. The amount of long-lived asset impairment is measured based on fair value and is charged to operations in the period in which long-lived asset impairment is determined by management. Manufacturing fixed assets are subject to obsolescence potential as result of changes in customer demands, manufacturing process changes and changes in materials used. The Company is not currently aware of any such changes that would cause impairment to the value of its manufacturing fixed assets.

Stock-based Compensation

We recognize compensation costs for all stock-based awards made to employees and directors. The fair value of stock-based awards is estimated at grant date using an option pricing model and the portion that is ultimately expected to vest is recognized as compensation cost over the requisite service period.

We use the Black-Scholes option-pricing model to estimate the fair value of stock-based awards. The determination of fair value using the Black-Scholes option-pricing model is affected by our stock price as well as assumptions regarding a number of complex and subjective variables, including expected stock price volatility, risk-free interest rate, expected dividends and projected employee stock option exercise behaviors. We estimate the expected term based on the contractual term of the awards and employees’ exercise and expected post-vesting termination behavior.

Derivative Liabilities

Our issued and outstanding common stock purchase warrants previously treated as equity pursuant to the derivative treatment exemption were no longer afforded equity treatment, and the fair value of these common stock purchase warrants, some of which have exercise price reset features and some that were issued with convertible debt, was reclassified from equity to liability status as if these warrants were treated as a derivative liability since their date of issue. The common stock purchase warrants were not issued with the intent of effectively hedging any future cash flow, fair value of any asset, liability or any net investment in a foreign operation. The warrants do not qualify for hedge accounting, and as such, all future changes in the fair value of these warrants will be recognized currently in earnings until such time as the warrants are exercised or expire. These common stock purchase warrants do not trade in an active securities market, and as such, we estimate the fair value of these warrants using the Black-Scholes option pricing model.

Convertible Debentures

If a conversion feature of conventional convertible debt is not accounted for as a derivative instrument and provides for a rate of conversion that is below market value, this feature is characterized as a beneficial conversion feature (“BCF”). A BCF is recorded by the Company as a debt discount. In those circumstances, the convertible debt will be recorded net of the discount related to the BCF. The Company amortizes the discount to interest expense over the life of the debt using the effective interest method.

Deferred Financing Costs

Deferred financing costs represent costs incurred in connection with the issuance of the convertible notes payable and private equity financing. Deferred financing costs are being amortized over the term of the financing instrument on a straight-line basis, which approximates the effective interest method or netted against the gross proceeds received from equity financing.

Income Taxes

We account for income taxes under the provision of the Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 740, Income Taxes, or ASC 740. As of March 31, 2013 and 2012, there were no unrecognized tax benefits included in the accompanying balance sheets that would, if recognized, affect the effective tax rates. Based on the weight of available evidence, the Company’s management has determined that it is more likely than not that the net deferred tax assets will not be realized. Therefore, the Company has recorded a full valuation allowance against the net deferred tax assets. The Company’s income tax provision consists of state minimum taxes.

Our practice is to recognize interest and/or penalties related to income tax matters in income tax expense. We had no accrual for interest or penalties on our consolidated balance sheets at March 31, 2013 and 2012, respectively and have not recognized interest and/or penalties in the consolidated statement of operations for the year ended March 31, 2013. We are subject to taxation in the United States and various state jurisdictions. As of March 31, 2013, the Company is no longer subject to U.S. federal examinations for years before 2009 and for California franchise and income tax examinations before 2008. However, to the extent allowed by law, the taxing authorities may have the right to examine prior periods where net operating losses were generated and carried forward, and make adjustments up to the amount of the net operating loss carry forward amount. The Company is not currently under examination by U.S. federal or state jurisdictions.

ITEM 7A.      QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Changes in United States interest rates would affect the interest earned on our cash and cash equivalents and interest expense on our revolving credit facility.

Based on our overall cash and cash equivalents interest rate exposure at March 31, 2013, a near-term change in interest rates, based on historical movements, would not have a material adverse effect on our financial position or results of operations.

We have operated primarily in the United States. Accordingly, we have not had any significant exposure to foreign currency rate fluctuations.

ITEM 8.       FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Reference is made to the consolidated financial statements included in this Report at pages F-3 through F-31.

ITEM 9.       CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURES

None.

ITEM 9A.       CONTROLS AND PROCEDURES

(a) Evaluation of Disclosure Controls and Procedures. The term “disclosure controls and procedures” (defined in Rule 13a-15(e) under the Securities and Exchange Act of 1934 (the “Exchange Act”) refers to the controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files under the Exchange Act is recorded, processed, summarized and reported within the required time periods. Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we have conducted an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures, as of March 31, 2013. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures were effective as of March 31, 2013 to ensure the timely disclosure of required information in our Securities and Exchange Commission filings.

Because of inherent limitations, internal control over financial reporting may not prevent or detect misstatements. In addition, the design of any system of control is based upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all future events, no matter how remote. Accordingly, even effective internal control over financial reporting can only provide reasonable assurance of achieving their control objectives.

(b) Management’s Report on Internal Control Over Financial Reporting. Management’s Report on Internal Control Over Financial Reporting which appears on the following page is incorporated herein by this reference.

(c) Changes in Internal Control over Financial Reporting. There have been no changes in our internal control over financial reporting during the fourth quarter of the fiscal year ended March 31, 2013 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

ITEM 9B.       OTHER INFORMATION

None.

CRYOPORT, INC.

MANAGEMENT’S REPORT ON

INTERNAL CONTROL OVER FINANCIAL REPORTING

The management of the Company is responsible for establishing and maintaining effective internal control over financial reporting and for the assessment of the effectiveness of internal control over financial reporting. The Company’s internal control over financial reporting is a process designed, as defined in Rule 13a-15(f) under the Securities and Exchange Act of 1934, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of consolidated financial statements for external purposes in accordance with generally accepted accounting principles.

The Company’s internal control over financial reporting is supported by written policies and procedures that:

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In connection with the preparation of the Company’s annual consolidated financial statements, management of the Company has undertaken an assessment of the effectiveness of the Company’s internal control over financial reporting based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (“the COSO Framework”). Management’s assessment included an evaluation of the design of the Company’s internal control over financial reporting and testing of the operational effectiveness of the Company’s internal control over financial reporting.

Based on this assessment, management has concluded that the Company’s internal control over financial reporting was effective as of March 31, 2013.

June 25, 2013

PART III

ITEM 10.       DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

The information required by this Item regarding our directors, executive officers and committees of our board of directors is incorporated by reference to the information set forth under the captions “Election of Directors” and “Executive Compensation and Related Matters” in our 2013 Definitive Proxy Statement to be filed within 120 days after the end of our fiscal year ended March 31, 2013 (the “2013 Definitive Proxy Statement”).

Information required by this Item regarding Section 16(a) reporting compliance is incorporated by reference to the information set forth under the caption “Section 16(a) Beneficial Ownership Reporting Compliance” in our 2013 Definitive Proxy Statement.

Information required by this Item regarding our code of ethics is incorporated by reference to the information set forth under the caption “Corporate Governance” in Part I of this Annual Report on Form 10-K.

ITEM 11.       EXECUTIVE COMPENSATION

The information required by this Item is incorporated by reference to the information set forth under the caption “Executive Compensation and Related Matters” in our 2013 Definitive Proxy Statement to be filed within 120 days after the end of our fiscal year ended March 31, 2013.

ITEM 12.      SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

The information required by this Item is incorporated by reference to the information set forth under the caption “Security Ownership of Directors and Executive Officers and Certain Beneficial Owners” in our 2013 Definitive Proxy Statement to be filed within 120 days after the end of our fiscal year ended March 31, 2013.

ITEM 13.       CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

The information required by this Item is incorporated by reference to the information set forth under the captions “Certain Relationships and Related Transactions” and “Compensation Committee Interlocks and Insider Participation” in our 2013 Definitive Proxy Statement to be filed within 120 days after the end of our fiscal year ended March 31, 2013.

ITEM 14.       PRINCIPAL ACCOUNTANT FEES AND SERVICES

The information required by this Item is incorporated by reference to the information set forth under the caption “Independent Registered Public Accounting Firm Fees” in our 2013 Definitive Proxy Statement to be filed within 120 days after the end of our fiscal year ended March 31, 2013.

PART IV

ITEM  15: Exhibits and Financial Statement Schedules.

(a) Financial Statements

(1) Index to Consolidated Financial Statements

The financial statements required by this item are submitted in a separate section beginning on page F-1 of this report.

All financial statement schedules are omitted because they were not required or the required information is included in the Consolidated Financial Statements and the related Notes thereto.

See Exhibit Index

CRYOPORT, INC.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors of

CryoPort, Inc.

We have audited the accompanying consolidated balance sheets of CryoPort, Inc. (the “Company”) as of March 31, 2013 and 2012, and the related consolidated statements of operations, stockholders’ (deficit) equity and cash flows for the years then ended. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall consolidated financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of CryoPort, Inc. at March 31, 2013 and 2012, and the results of its operations and its cash flows for the years then ended in conformity with accounting principles generally accepted in the United States of America.

The accompanying consolidated financial statements have been prepared assuming the Company will continue as a going concern. As described in Note 1 to the consolidated financial statements, the Company has incurred recurring operating losses and has had negative cash flows from operations since inception. Although the Company has cash and cash equivalents of $563,104 at March 31, 2013, management has estimated that cash on hand, which include proceeds from convertible bridge notes received in the fourth quarter of fiscal 2013, will only be sufficient to allow the Company to continue its operations into the second quarter of fiscal 2014. These matters raise substantial doubt about the Company’s ability to continue as a going concern. Management’s plans in regard to these matters are also described in Note 1. The consolidated financial statements do not include any adjustments to reflect possible future effects on the recoverability and classification of assets or the amount and classification of liabilities that may result from the outcome of this uncertainty.

/s/ KMJ Corbin & Company LLP

Costa Mesa, California

June 25, 2013

CRYOPORT, INC.

CONSOLIDATED BALANCE SHEETS

See accompanying notes to consolidated financial statements.

CRYOPORT, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

See accompanying notes to consolidated financial statements.

CRYOPORT, INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ (DEFICIT) EQUITY

See accompanying notes to consolidated financial statements. 

CRYOPORT, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

See accompanying notes to consolidated financial statements.

CRYOPORT, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Note 1. Organization and Summary of Significant Accounting Policies

The Company

Cryoport, Inc. (the “Company”, “Cryoport” or “we”) serves the biotech industries providing comprehensive solutions for frozen cold chain logistics, primarily in the life science industries. Its solutions are novel, new and reliable alternatives to currently existing products and services utilized for frozen shipping of bio-pharmaceuticals and biologics, including stem cells, cell lines, vaccines, diagnostic materials, semen and embryos for in-vitro fertilization, cord blood, bio-pharmaceuticals, infectious substances and other items that require continuous exposure to frozen or cryogenic temperatures. Cryoport’s solutions can contribute to both the efficiency and effectiveness of clinical trials.

The Cryoport Express^® Solution includes a web-based logistics platform branded as the Cryoportal^TM (formerly referred to as the Cryoport Express^® Portal). The Cryoportal manages customer ordering, tracking, customs documentation, and communication through a single interface as well as enabling the monitoring of a shipment’s location and integrity throughout the entire shipping process. In addition, the Cryoportal provides an array of information dashboards and validation documentation for every shipment.

Integral to this solution are also, in part, the Cryoport Liquid Nitrogen Dry Vapor Shippers (Cryoport Express^® Shippers) which are cost-effective and reusable cryogenic transport containers (patented vacuum flasks) utilizing innovative liquid nitrogen (LN2) based technology. Cryoport Express^® Shippers are non-hazardous, IATA (International Air Transport Association) certified, and are validated to maintain stable temperatures below minus 150° Celsius for a 10-plus day dynamic shipment period. The Company currently features two Cryoport Express Shipper models, the Standard Dry Shipper (holding up to approximately 75-2.0 ml vials) and the High Volume Dry Shipper (holding up to approximately 500-2.0 ml vials).

The Cryoport Express^® Solutions provide a fully documented “chain-of-custody” and at customer request “chain-of-condition” for every shipment, helping ensure that quality, safety, efficacy, and stability of shipped commodities are maintained. Cryoport Express^® Solutions can be used by customers, as a “turnkey” solution, through direct access to the cloud-based Cryoportal, or by contacting Cryoport client Care for order entry tasks. Cryoport provides 24/7/365 logistics services through its Client Care team and also provides complete training and process management services to support each customer’s requirements.

Cryoport Express^® Solutions have been the Company’s principal focus for development and commercialization. In addition, during the first half of fiscal year 2013, the Company expanded its solutions to address specific market needs in the biotechnology and life science industries. The primary Cryoport solutions offerings are as follows:

The fully outsourced turn-key logistics solution described above.

Cryoport ships an inventory of Cryoport Express^® Shippers to the customer (uncharged and in bulk) enabling the customer to charge the shippers at their facility, process their orders through the Cryoportal which Cryoport Client Care to oversee each shipment and return the shippers to Cryoport for cleaning, testing and refurbishing. Cryoport provides the 24/7/365 logistics services utilizing its Cryoportal logistics platform.

Cryoport ships a fully charged Cryoport Express^® Shipper(s) to the customer enabling the customer to utilize their internal expertise to manage all or a portion of the logistics services. As with the above solutions, the shippers are returned to Cryoport for cleaning, testing and refurbishing within a pre-determined time period.

The Cryoport logistics team provides a tailored and full range of logistics support solutions. In addition to tailoring a management solution, the robust, enterprise-grade Cryoportal is used to provide complete logistics services while enabling the customer to utilize their own packaging solutions or Cryoport Express^® Shippers. Cryoport can provide onsite logistics personnel, allowing the customer to fully outsource their cold chain logistics needs component to Cryoport to focus on its core competencies.

“Powered by Cryoport” are important partnership arrangements with integrators, freight forwarders and other logistics providers, enabling partners to expand their solutions offering by adding the total Cryoport Express® Solution to their customer offering.

One of our distribution partnership solutions engagements involves an agreement with Federal Express Corporation (“FedEx”) to provide frozen shipping logistics services through the combination of our purpose built proprietary technologies and turnkey management processes. FedEx markets and sells Cryoport’s services for frozen temperature-controlled cold chain transportation as its FedEx^® Deep Frozen Shipping Solution, on a non-exclusive basis and at its sole expense. During fiscal year 2013, the Company worked closely with FedEx to further align its sales efforts and accelerate penetration within FedEx’s life sciences customer base through improved processes, sales incentives, joint customer calls and more frequent communication at the sales and executive level. In addition, the Company has developed a FedEx branded portal, which is “powered by the Cryoport”, for use by FedEx and its customers giving them access to the full capabilities of our logistics management platform.

During the fourth quarter of fiscal 2013, the Company entered into a master agreement (“FedEx Agreement”) with FedEx renewing these services and providing FedEx with a non-exclusive license and right to use a customized version of our Cryoportal for the management of shipments made by FedEx customers. The Agreement was effective on January 1, 2013 and, unless sooner terminated as provided in the FedEx Agreement, expires on December 31, 2015.

The Company continues its agreement with another global courier, DHL Express (USA), Inc. (“DHL”) that gives DHL life science customers direct access to the Company’s web-based order entry and tracking portal to order CryoPort Express^® Dry Shippers and receive preferred DHL shipping rates. The agreement covers DHL shipping discounts that may be used to support the Company’s customers using Cryoport Express^® Solutions. In connection with the agreement, the Company has integrated its proprietary web portal to DHL’s tracking and billing systems to provide DHL life science customers with a seamless way of shipping their critical biological material worldwide.

In December 2012, we signed an agreement with Pfizer Inc. relating to Zoetis Inc. (formerly the animal health business unit of Pfizer Inc., “Zoetis”) pursuant to which we were engaged to manage frozen shipments of a key poultry vaccine. Under this arrangement, the Company will provide on-site logistics personnel and its logistics management platform, the Cryoportal^TM, to manage shipments from the Zoetis manufacturing site in the United States to domestic customers as well as various international distribution centers. As part of its logistics management services, the Company will analyze shipping data and processes to further streamline Zoetis’ logistics, ensuring products arrive to their destinations in specified conditions, on-time and with the optimum uses of resources. Initially, the Company will manage Zoetis’ total fleet of dewar flask shippers used for this purpose, including liquid nitrogen shippers.

We offer our solutions to companies in the biotechnology and life science industries and are targeting specific verticals including biotech and diagnostic companies, pharmaceutical companies, central laboratories, contract research organizations, the reproductive medicine market/in vitro fertilization market, and research institutions. These companies operate within a heavily regulated environment and as such, changing vendors and distribution practices typically require a number of steps, which may include the audit of our facilities, review of our procedures, qualifying us as a vendor, and performing test shipments. This process can take six to eighteen months or longer to complete prior to a potential customer adopting the Cryoport Express^® Solution.

Going Concern

The consolidated financial statements have been prepared using the accrual method of accounting in accordance with accounting principles generally accepted in the United States of America (“U.S.”) (“GAAP”) and have been prepared on a going concern basis, which contemplates the realization of assets and the settlement of liabilities in the normal course of business. We have sustained operating losses since our inception and have used substantial amounts of working capital in our operations. Further, at March 31, 2013, we had an accumulated deficit of $66,311,448 and we had a net loss of $6,382,433 and we used cash in operations of $4,785,144 during the year ended March 31, 2013. These factors raise substantial doubt about our ability to continue as a going concern.

We expect to continue to incur substantial additional operating losses from costs related to the commercialization of our Cryoport Express^® Solutions and do not expect that revenues from operations will be sufficient to satisfy our funding requirements in the near term. We believe that our cash resources at March 31, 2013, together with the revenues generated from our services, the continued focus on cost reductions of non-sales generating costs will be sufficient to sustain our planned operations into the second quarter of fiscal year 2014; however, we must obtain additional capital to fund operations thereafter and for the achievement of sustained profitable operations. We are currently working on funding alternatives in order to secure sufficient operating capital to allow us to continue to operate as a going concern.

Future capital requirements will depend upon many factors, including the success of our commercialization efforts and the level of customer adoption of our Cryoport Express^® Solutions as well as our ability to establish additional collaborative arrangements. We cannot make any assurances that the sales ramp together with cost reduction measures will lead to achievement of sustained profitable operations or that any additional financing will be completed on a timely basis, on acceptable terms or at all. Management’s inability to successfully achieve significant revenue increases or its cost reduction strategies, or to complete any other financing will adversely impact our ability to continue as a going concern. To address this issue, the Company has instituted cost containment measures and is seeking additional capitalization to properly fund its efforts to become a self-sustaining financially viable entity.  

Basis of Presentation

The accompanying consolidated financial statements have been prepared in accordance with GAAP.

Principles of Consolidation

The consolidated financial statements include the accounts of CryoPort, Inc. and its wholly owned subsidiary, CryoPort Systems, Inc. All intercompany accounts and transactions have been eliminated.

Use of Estimates

The preparation of consolidated financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting periods. Actual results could differ from estimated amounts. The Company’s significant estimates include allowances for doubtful accounts, recoverability of long-lived assets, allowance for inventory obsolescence, deferred taxes and their accompanying valuations, valuation of derivative liabilities and valuation of common stock, warrants and stock options issued for products or services.

Fair Value of Financial Instruments

The Company’s financial instruments consist of cash and cash equivalents, restricted cash, accounts receivable, related-party notes payable, convertible notes payable, accounts payable and accrued expenses. The carrying value for all such instruments approximates fair value at March 31, 2013 and 2012. The difference between the fair value and recorded values of the related party notes payable is not significant. The Company’s restricted cash is carried at amortized cost which approximates fair value at March 31, 2013 and 2012.

Cash and Cash Equivalents

The Company considers highly liquid investments with original maturities of 90 days or less to be cash equivalents.

Concentrations of Credit Risk

The Company maintains its cash accounts in financial institutions. Accounts at these institutions are insured by the Federal Deposit Insurance Corporation (“FDIC”) with basic deposit insurance coverage limits up to $250,000 per owner. At March 31, 2013 and 2012, the Company had approximately $214,000 and $0, respectively, which exceeded the FDIC insurance limit, of cash balances, including restricted cash. The Company performs ongoing evaluations of these institutions to limit its concentration risk exposure.

Restricted Cash

In conjunction with the private placement in February 2012, the Company was required to deposit $444,168 into an escrow account representing the total future principal payments due to one the convertible debenture holders (see Note 8). At March 31, 2012, $251,368 remained in escrow and was disbursed to the note holder during the first quarter of fiscal year 2013. Previously, the Company also invested cash in a one year restricted certificate of deposit bearing interest at 1% which served as collateral for borrowings under a line of credit agreement (see Note 6). During 2012 the Company repaid the line of credit and the previously restricted cash balances were released to the Company.

Customers

The Company grants credit to customers within the U.S. and to a limited number of international customers and does not require collateral. Revenues from international customers are generally secured by advance payments except for a limited number of established foreign customers. The Company generally requires advance or credit card payments for initial revenues from new customers. The Company’s ability to collect receivables is affected by economic fluctuations in the geographic areas and industries served by the Company. Reserves for uncollectible amounts are provided based on past experience and a specific analysis of the accounts, which management believes is sufficient. Accounts receivable at March 31, 2013 and 2012 are net of reserves for doubtful accounts of $8,700 and $5,500, respectively. Although the Company expects to collect amounts due, actual collections may differ from the estimated amounts.

The Company has foreign revenues primarily in Europe, Japan, Canada, India and Australia. During fiscal years 2013 and 2012, the Company had foreign revenues of approximately $460,000 and $301,000, respectively, which constituted approximately 42% and 54% of total revenues, respectively.

The majority of the Company’s customers are in the biotechnology, pharmaceutical and life science industries. Consequently, there is a concentration of receivables within these industries, which is subject to normal credit risk. At March 31, 2013, no customers accounted for more than 10% of revenues. At March 31, 2012, annual revenues from two major customers accounted for 26% of our total revenues. The Company maintains reserves for bad debt and such losses, in the aggregate, historically have not exceeded our estimates.

Inventories

The Company’s inventories consist of accessories that are sold and shipped to customers along with pay-per-use containers that are not returned to the Company along with the containers at the culmination of the customer’s shipping cycle. Inventories are stated at the lower of cost or current estimated market value. Cost is determined using the standard cost method which approximates the first-in, first-to-expire method. Inventories are reviewed periodically for slow-moving or obsolete status. The Company writes down the carrying value of its inventories to reflect situations in which the cost of inventories is not expected to be recovered. Once established, write-downs of inventories are considered permanent adjustments to the cost basis of the obsolete or excess inventories. Raw materials and finished goods include material costs less reserves for obsolete or excess inventories. The Company evaluates the current level of inventories considering historical trends and other factors, and based on the evaluation, records adjustments to reflect inventories at its net realizable value. These adjustments are estimates, which could vary significantly from actual results if future economic conditions, customer demand, competition or other relevant factors differ from expectations. These estimates require us to make assessments about future demand for the Company’s products in order to categorize the status of such inventories items as slow-moving, obsolete or in excess-of-need. These estimates are subject to the ongoing accuracy of the Company’s forecasts of market conditions, industry trends, competition and other factors.

Property and Equipment

The Company provides shipping containers to its customers and charges a fee in exchange for the use of the container. The Company’s arrangements are similar to the accounting standard for leases since they convey the right to use the container over a period of time. The Company retains the title to the containers and provides its customers the use of the container for a specific shipping cycle. At the culmination of the customer’s shipping cycle, the container is returned to the Company. As a result, the Company classifies the containers as fixed assets for the per-use container program.

Property and equipment are recorded at cost. Cryogenic shippers, which comprise of 87% and 84% of the Company’s net property and equipment balance at March 31, 2013 and 2012, respectively, are depreciated using the straight-line method over their estimated useful lives of three years. Equipment and furniture are depreciated using the straight-line method over their estimated useful lives (generally three to seven years) and leasehold improvements are amortized using the straight-line method over the estimated useful life of the asset or the lease term, whichever is shorter. Equipment acquired under capital leases is amortized over the estimated useful life of the assets or term of the lease, whichever is shorter and included in depreciation expense.

Betterments, renewals and extraordinary repairs that extend the lives of the assets are capitalized; other repairs and maintenance charges are expensed as incurred. The cost and related accumulated depreciation and amortization applicable to assets retired are removed from the accounts, and the gain or loss on disposition is recognized in current operations.

Intangible Assets

Intangible assets are comprised of patents and trademarks and software development costs. The Company capitalizes costs of obtaining patents and trademarks, which are amortized, using the straight-line method over their estimated useful life of five years. The Company capitalizes certain costs related to software developed for internal use. Software development costs incurred during the preliminary or maintenance project stages are expensed as incurred, while costs incurred during the application development stage are capitalized and amortized using the straight-line method over the estimated useful life of the software, which is five years. Capitalized costs include purchased materials and costs of services including the valuation of warrants issued to consultants.

Long-lived Assets

If indicators of impairment exist, we assess the recoverability of the affected long-lived assets by determining whether the carrying value of such assets can be recovered through undiscounted future operating cash flows. If impairment is indicated, we measure the amount of such impairment by comparing the fair value to the carrying value. We believe the future cash flows to be received from the long-lived assets will exceed the assets’ carrying value, and accordingly, we have not recognized any impairment losses through March 31, 2013.

Deferred Financing Costs

Deferred financing costs represent costs incurred in connection with the issuance of the convertible notes payable and private equity financing. Deferred financing costs related to the issuance of debt are being amortized over the term of the financing instrument using the effective interest method while deferred financing costs from equity financings are netted against the gross proceeds received from the equity financings.

During the year ended March 31, 2013 and 2012, the Company incurred $103,542 and $572,255, respectively of offering costs in connection with the private placement that closed in February and March 2012, which were charged to additional paid-in capital and netted against the proceeds received in the private placements. As of March 31, 2013 and 2012, offering costs of $53,747 and$78,480, respectively, related to the private placement were included in accounts payable and accrued expenses in the accompanying consolidated balance sheets.

In connection with the convertible debt financing in the fourth quarter of 2013, the Company incurred financing costs which were capitalized and are being amortized over the term of the convertible notes payable using the straight-line method which approximates the effective interest method (see Note 8).

During the year ended March 31, 2011, the Company incurred $465,023 of offering costs in connection with the private placement that closed in August and October 2010 and $1,311,582 of offering costs from the private placement that closed in February 2011; both of which were charged to additional paid-in capital and netted against the proceeds received in the private placements. During the year ended March 31, 2012, the Company made payments of $158,270 for offering costs and financing fees related to the February 2011 private placement of which $121,727 was included in accounts payable and accrued expenses as of March 31, 2011.

Convertible Debentures

If a conversion feature of conventional convertible debt is not accounted for as a derivative instrument and provides for a rate of conversion that is below market value, this feature is characterized as a beneficial conversion feature (“BCF”). A BCF is recorded by the Company as a debt discount. The convertible debt is recorded net of the discount related to the BCF. The Company amortizes the discount to interest expense over the life of the debt using the effective interest rate method.

Derivative Liabilities

Certain of the Company’s issued and outstanding common stock purchase warrants which have exercise price reset features are treated as derivatives for accounting purposes. The common stock purchase warrants were not issued with the intent of effectively hedging any future cash flow, fair value of any asset, liability or any net investment in a foreign operation. The warrants do not qualify for hedge accounting, and as such, all future changes in the fair value of these warrants are recognized currently in earnings until such time as the warrants are exercised, expire or the related rights have been waived. These common stock purchase warrants do not trade in an active securities market, and as such, the Company estimates the fair value of these warrants using the Black-Scholes option pricing model (“Black-Scholes”) (see Note 9).

Commitments and Contingencies

The Company is subject to routine claims and litigation incidental to our business. In the opinion of management, the resolution of such claims is not expected to have a material adverse effect on our operating results or financial position.

Income Taxes

The Company accounts for income taxes under the provision of the Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 740, Income Taxes, or ASC 740. The Company is a subchapter “C” corporation and files a federal income tax return. The Company files state income tax returns in California.

Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. A valuation allowance is provided for certain deferred tax assets if it is more likely than not that the Company will not realize tax assets through future operations. Based on the weight of available evidence, the Company’s management has determined that it is more likely than not that the net deferred tax assets will not be realized. Therefore, the Company has recorded a full valuation allowance against the net deferred tax assets. The Company’s income tax provision consists of state minimum taxes.

ASC 740, which clarifies the accounting for uncertainty in income taxes recognized in the financial statements, provides that a tax benefit from an uncertain tax position may be recognized when it is more likely than not that the position will be sustained upon examination, including resolutions of any related appeals or litigation processes, based on the technical merits. Income tax positions must meet a more likely than not recognition threshold. As of March 31, 2013 and 2012, there were no unrecognized tax benefits included in the accompanying consolidated balance sheets that would, if recognized, affect the effective tax rates. It is not anticipated that there will be a significant change in the unrecognized tax benefits over the next twelve months.

The Company’s policy is to recognize interest and/or penalties related to income tax matters in income tax expense. The Company had no accrual for interest or penalties on its consolidated balance sheets at March 31, 2013 and 2012, respectively and has not recognized interest and/or penalties in the consolidated statement of operations for the years ended March 31, 2013 and 2012. The Company is subject to taxation in the U.S. and various state jurisdictions. As of March 31, 2013, the Company is no longer subject to U.S. federal examinations for years before 2009 and for California franchise and income tax examinations for years before 2008. However, to the extent allowed by law, the taxing authorities may have the right to examine prior periods where net operating losses were generated and carried forward, and make adjustments up to the amount of the net operating loss carry forward amount. The Company is not currently under examination by U.S. federal or state jurisdictions.

Supply Concentration Risks

The component parts for our products are primarily manufactured at third party manufacturing facilities. The Company also has a warehouse at our corporate offices in Lake Forest, California, where the Company is capable of manufacturing certain parts and fully assembles its products. Most of the components that the Company uses in the manufacture of its products are available from more than one qualified supplier. For some components, however, there are relatively few alternate sources of supply and the establishment of additional or replacement suppliers may not be accomplished immediately, however, the Company has identified alternate qualified suppliers which the Company believes could replace existing suppliers. Should this occur, the Company believes that with its current level of shippers and production rate the Company has enough to cover a four to six week gap in maximum disruption of production.

There are no specific agreements with any manufacturer nor are there any long term commitments to any manufacturer. The Company believes that any of the manufactures currently used by it could be replaced within a short period of time as none have a proprietary component or a substantial capital investment specific to its products.

Revenue Recognition

The Company provides shipping containers to their customers and charges a fee in exchange for the use of the container. The Company’s arrangements are similar to the accounting standard for leases since they convey the right to use the containers over a period of time. The Company retains title to the containers and provides its customers the use of the container for a specified shipping cycle. At the culmination of the customer’s shipping cycle, the container is returned to the Company.

The Company recognizes revenue for the use of the shipper at the time of the delivery of the shipper to the end user of the enclosed materials, and at the time that collectability is reasonably certain. Revenue is based on gross net of discounts and allowances.

The Company also provides logistics support and management to some customers, which may include onsite logistics personnel. Revenue is recognized for these services as services are rendered and at the time that collectability is reasonably certain.

Accounting for Shipping and Handling Revenue, Fees and Costs

The Company classifies amounts billed for shipping and handling as revenue. Shipping and handling fees and costs are included in cost of sales in the accompanying consolidated statements of operations.

Research and Development Expenses

Expenditures relating to research and development are expensed in the period incurred. Research and development expenses to date have consisted primarily of costs associated with the continually improving the features of the CryoPort Express^® Solution including the web based customer service portal and the CryoPort Express^® Shippers. Further, these efforts are expected to lead to the introduction of shippers of varying sizes based on market requirements, constructed of lower cost materials and utilizing high volume manufacturing methods that will make it practical to provide the cryogenic packages offered by the CryoPort Express^® Solution. Other research and development effort has been directed toward improvements to the liquid nitrogen retention system to render it more reliable in the general shipping environment and to the design of the outer packaging. Alternative phase change materials in place of liquid nitrogen may be used to increase the potential markets these shippers can serve such as ambient and 2-8°C markets.

Stock-based Compensation

The Company accounts for stock-based payments to employees and directors in accordance with stock-based payment accounting guidance which requires all stock-based payments to employees and directors, including grants of employee stock options and warrants, to be recognized based upon their fair values. The fair value of stock-based awards is estimated at grant date using Black-Scholes and the portion that is ultimately expected to vest is recognized as compensation cost over the requisite service period.

Since stock-based compensation is recognized only for those awards that are ultimately expected to vest, the Company has applied an estimated forfeiture rate to unvested awards for the purpose of calculating compensation cost. These estimates will be revised, if necessary, in future periods if actual forfeitures differ from estimates. Changes in forfeiture estimates impact compensation cost in the period in which the change in estimate occurs. The estimated forfeiture rates at March 31, 2013 and 2012 was zero as the Company has not had a significant history of forfeitures and does not expect significant forfeitures in the future.

Cash flows from the tax benefits resulting from tax deductions in excess of the compensation cost recognized for those options or warrants are classified as financing cash flows. Due to the Company’s loss position, there were no such tax benefits during years ended March 31, 2013 and 2012.

The Company uses Black-Scholes to estimate the fair value of stock-based awards. The determination of fair value using Black-Scholes is affected by its stock price as well as assumptions regarding a number of complex and subjective variables, including expected stock price volatility, risk-free interest rate, expected dividends and projected employee stock option exercise behaviors.

The Company’s stock-based compensation plans are discussed further in Note 11.

Equity Instruments Issued to Non-Employees for Acquiring Goods or Services

Issuances of the Company’s common stock for acquiring goods or services are measured at the fair value of the consideration received or the fair value of the equity instruments issued, whichever is more reliably measurable. The measurement date for the fair value of the equity instruments issued to consultants or vendors is determined at the earlier of (i) the date at which a commitment for performance to earn the equity instruments is reached (a “performance commitment” which would include a penalty considered to be of a magnitude that is a sufficiently large disincentive for nonperformance) or (ii) the date at which performance is complete. When it is appropriate for the Company to recognize the cost of a transaction during financial reporting periods prior to the measurement date, for purposes of recognition of costs during those periods, the equity instrument is measured at the then-current fair values at each of those interim financial reporting dates (see Note 12).

Basic and Diluted Loss Per Share

Basic loss per common share is computed based on the weighted average number of shares outstanding during the period. Diluted loss per share is computed by dividing net loss by the weighted average shares outstanding assuming all dilutive potential common shares were issued. In addition, in computing the dilutive effect of convertible securities, the numerator is adjusted to add back the after-tax amount of interest, if any, recognized in the period with any convertible debt. For the years ended March 31, 2013 and 2012, the Company was in a loss position and the basic and diluted loss per share are the same since the effect of stock options, warrants and convertible notes payable on loss per share was anti-dilutive and thus not included in the diluted loss per share calculation. The impact under the treasury stock method of dilutive stock options and warrants and the if-converted method of convertible debt would have resulted in weighted average common shares outstanding of approximately 38,172,000 and 34,128,000 for the years ended March 31, 2013 and 2012, respectively.

Segment Reporting

We currently operate in only one segment.

Note 2. Inventories

Inventories consist of the following: