CYBEROPTICS CORP - Quarter Report: 2018 September (Form 10-Q)

SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-Q
	(Check One)
þ QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended September 30, 2018
o TRANSITION PURSUANT TO SECTION 13 OR 15(D)
OF THE SECURITIES EXCHANGE ACT
For the transition period from ______ to ______
COMMISSION FILE NO. (0-16577)
CYBEROPTICS CORPORATION
(Exact name of registrant as specified in its charter)

 

Minnesota		41-1472057
(State or other jurisdiction of		(I.R.S. Employer
incorporation or organization)		Identification No.)
5900 Golden Hills Drive
MINNEAPOLIS, MINNESOTA		55416
(Address of principal executive offices)		(Zip Code)

 

	(763) 542-5000
(Registrant’s telephone number, including area code)

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No o

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes þ No o

 

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer”, "smaller reporting company", and "emerging growth company" in Rule 12b-2 of the Exchange Act.

 

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o No þ

 

Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date. At October 31, 2018, there were 7,078,190 shares of the registrant’s Common Stock, no par value, issued and outstanding. 

PART I. FINANCIAL INFORMATION

 

ITEM 1. INTERIM CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

 

INTERIM CONDENSED CONSOLIDATED BALANCE SHEETS

CYBEROPTICS CORPORATION

(Unaudited)

 

SEE THE ACCOMPANYING NOTES TO UNAUDITED INTERIM CONDENSED CONSOLIDATED FINANCIAL STATEMENTS.

 

 

INTERIM CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

CYBEROPTICS CORPORATION

(Unaudited)

 

SEE THE ACCOMPANYING NOTES TO UNAUDITED INTERIM CONDENSED CONSOLIDATED FINANCIAL STATEMENTS.

 

 

INTERIM CONDENSED CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

CYBEROPTICS CORPORATION

(Unaudited)

 

SEE THE ACCOMPANYING NOTES TO UNAUDITED INTERIM CONDENSED CONSOLIDATED FINANCIAL STATEMENTS.

 

 

INTERIM CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

CYBEROPTICS CORPORATION

(Unaudited)

 

SEE THE ACCOMPANYING NOTES TO UNAUDITED INTERIM CONDENSED CONSOLIDATED FINANCIAL STATEMENTS.

 

 

NOTES TO THE UNAUDITED INTERIM CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

CYBEROPTICS CORPORATION

1. INTERIM REPORTING:

The interim condensed consolidated financial statements of CyberOptics Corporation ("we", "us" or "our") presented herein as of September 30, 2018, and for the three and nine month periods ended September 30, 2018 and 2017, are unaudited, but in the opinion of management, include all adjustments, consisting of normal recurring adjustments, necessary for a fair presentation of financial position, results of operations and cash flows for the periods presented.

The results of operations for the three and nine month periods ended September 30, 2018 do not necessarily indicate the results to be expected for the full year. The December 31, 2017 consolidated balance sheet data was derived from audited consolidated financial statements, but does not include all disclosures required by accounting principles generally accepted in the United States of America. The unaudited interim condensed consolidated financial statements should be read in conjunction with our consolidated financial statements and notes thereto contained in our Annual Report on Form 10-K for the year ended December 31, 2017.

3. MARKETABLE SECURITIES:

Our investments in marketable securities are classified as available-for-sale and consist of the following: 

Effective January 1, 2018, we adopted ASU No. 2016-01, Recognition and Measurement of Financial Assets and Liabilities, which impacted the accounting for our marketable equity security (see Note 16). Our investments in marketable debt securities all have maturities of less than five years. Net pre-tax unrealized losses for marketable securities of $112,000 at September 30, 2018 and $22,000 at December 31, 2017 have been recorded as a component of accumulated other comprehensive loss in stockholders’ equity. We have determined that the net pre-tax unrealized losses for marketable debt securities at September 30, 2018 and December 31, 2017 were caused by fluctuations in interest rates and are temporary in nature. We review our marketable securities to identify and evaluate investments that have indications of possible impairment. Factors considered in determining whether a loss is other-than-temporary include the length of time and extent to which the fair value of the investment has been less than the cost basis, the credit quality of the investment and our ability and intent to hold the investment for a period of time sufficient to allow for any anticipated recovery in market value. We received proceeds from sales of marketable securities of $480,000, and recognized a $3,000 gain on the sales, in the three and nine months ended September 30, 2018. No marketable securities were sold in the nine months ended September 30, 2017.  

Cash and marketable securities held by foreign subsidiaries totaled $532,000 at September 30, 2018 and $187,000 at December 31, 2017.

5. ACCOUNTING FOR STOCK-BASED COMPENSATION:

We have three stock-based compensation plans that are administered by the Compensation Committee of the Board of Directors. We have (1) an Employee Stock Incentive Plan for officers, other employees, consultants and independent contractors under which we have granted options and restricted stock units to officers and other employees, (2) an Employee Stock Purchase Plan under which shares of our common stock may be acquired by employees at discounted prices, and (3) a Non-Employee Director Stock Plan that provides for automatic grants of restricted shares of our common stock to non-employee directors. New shares of our common stock are issued upon stock option exercises, vesting of restricted stock units, issuances of shares to board members and issuances of shares under the Employee Stock Purchase Plan.

 

Employee Stock Incentive Plan

 

As of September 30, 2018, there were 336,489 shares of common stock reserved in the aggregate for issuance pursuant to future awards under our Employee Stock Incentive Plan and 534,087 shares of common stock reserved in the aggregate for issuance pursuant to outstanding awards under our Employee Stock Incentive Plan. Although our Compensation Committee has authority to issue options, restricted stock, restricted stock units, share grants and other share-based benefits under our Employee Stock Incentive Plan, to date only restricted stock units and stock options have been granted under the plan. Options have been granted at an option price per share equal to the market value of our common stock on the date of grant, vest over a four year period and expire seven years after the date of grant. Restricted stock units vest over a four year period and entitle the holders to one share of our common stock for each restricted stock unit. Shares reserved for issuance under outstanding awards, including options and restricted stock units, that are forfeited become available under the Employee Stock Incentive Plan for future grants. 

Non-Employee Director Stock Plan

 

As of September 30, 2018, there were 60,000 shares of common stock reserved in the aggregate for issuance pursuant to future restricted share awards under our Non-Employee Director Stock Plan and 16,000 shares of common stock reserved in the aggregate for issuance pursuant to outstanding stock option awards under our Non-Employee Director Stock Plan. Under the terms of the plan, each non-employee director will automatically be granted 2,000 shares of our common stock on the date of each annual meeting at which such director is elected to serve on the board. At our May 11, 2017 annual meeting, our shareholders, upon recommendation of the Board of Directors, approved amendments to the Non-Employee Director Stock Plan that eliminated annual stock option grants for non-employee directors and provided for annual restricted share grants of 2,000 shares of common stock which vest in four equal quarterly installments during the year after the grant date, provided the non-employee director is still serving as a director on the applicable vesting date. 

On the date of our 2018 annual meeting, we issued a total of 8,000 shares of our common stock to our non-employee directors. The shares had an aggregate fair market value on the date of grant equal to $130,000 (grant date fair value of $16.25 per share). As of September 30, 2018, 2,000 of these shares were vested. The aggregate fair value of the outstanding unvested shares based on the closing price of our common stock on September 30, 2018 was $121,000. 

On the date of our 2017 annual meeting, we issued a total of 8,000 shares of our common stock to our non-employee directors. The shares had an aggregate fair market value on the date of grant equal to $167,000 (grant date fair value of $20.90 per share). 

Stock Option Activity

The following is a summary of stock option activity in the nine months ended September 30, 2018:

 

The intrinsic value of an option is the amount by which the market price of the underlying common stock exceeds the option's exercise price. For options outstanding at September 30, 2018, the weighted average remaining contractual term of all outstanding options was 3.8 years and their aggregate intrinsic value was $5.2 million. At September 30, 2018, the weighted average remaining contractual term of options that were exercisable was 3.0 years and their aggregate intrinsic value was $3.7 million. The aggregate intrinsic value of stock options exercised in the nine months ended September 30, 2018 was $572,000. We received proceeds from stock option exercises of $452,000 in the nine months ended September 30, 2018 and $330,000 in the nine months ended September 30, 2017. The aggregate fair value of options that vested in the nine months ended September 30, 2018 was $204,000.

Restricted Shares and Restricted Stock Units 

 

Restricted shares are granted under our Non-Employee Director Stock Plan. There were 8,000 restricted shares granted in the nine months ended September 30, 2018 (weighted average grant date fair value of $16.25 per share). Restricted stock units are granted under our Employee Stock Incentive Plan. No restricted stock units were granted in the nine months ended September 30, 2018. The aggregate fair value of outstanding restricted shares and restricted stock units based on the closing share price of our common stock on September 30, 2018 was $1.0 million. The aggregate fair value of restricted shares and restricted stock units that vested in the nine months ended September 30, 2018 was $177,000, based on the closing price of our common stock on the vesting date.

 

A summary of activity for non-vested restricted shares and restricted stock units in the nine months ended September 30, 2018 is as follows:

 

Employee Stock Purchase Plan

 

We have an Employee Stock Purchase Plan available to eligible U.S. employees. Under terms of the plan, eligible employees may designate from 1% to 10% of their compensation to be withheld through payroll deductions, up to a maximum of $6,500 in each plan year, for the purchase of common stock at 85% of the lower of the market price on the first or last day of the offering period. There were 16,403 shares issued under this plan in the nine months ended September 30, 2018. At our 2018 annual meeting, our shareholders adopted amendments to the plan increasing the number of shares authorized for issuance under the plan by 150,000 and extending the expiration date of the plan to August 1, 2028. As of September 30, 2018, 174,469 shares remain available for future issuance under the Employee Stock Purchase Plan. 

Stock Based Compensation Information

 

All stock based compensation awarded to our employees and non-employee directors, representing grants of restricted shares, stock options and restricted stock units, are recognized as an expense in our consolidated statement of operations based on the grant date fair value of the award. We utilize the straight-line method of expense recognition over the vesting period for our options subject to time-based vesting restrictions. The fair value of stock options granted has been determined using the Black-Scholes model. We have classified equity-based compensation expenses within our statement of operations in the same manner as our cash-based compensation costs.

 

Stock-based compensation expense in the three months ended September 30, 2018 totaled $217,000, and included $94,000 for stock options, $31,000 for our Employee Stock Purchase Plan, $59,000 for unvested restricted stock units and $33,000 for unvested restricted shares. Stock-based compensation expense in the nine months ended September 30, 2018 totaled $701,000, and included $328,000 for stock options, $86,000 for our Employee Stock Purchase Plan, $176,000 for unvested restricted stock units and $111,000 for unvested restricted shares.

 

Stock-based compensation expense in the three months ended September 30, 2017 totaled $240,000, and included $116,000 for stock options, $33,000 for our Employee Stock Purchase Plan, $49,000 for unvested restricted stock units and $42,000 for unvested restricted shares. Stock-based compensation expense in the nine months ended September 30, 2017 totaled $640,000, and included $345,000 for stock options, $85,000 for our Employee Stock Purchase Plan, $145,000 for unvested restricted stock units and $65,000 for unvested restricted shares.

 

At September 30, 2018, the total unrecognized compensation cost related to outstanding non-vested stock-based compensation arrangements was $1.5 million, and the related weighted average period over which this cost is expected to be recognized was 2.36 years.

6. CHANGES IN STOCKHOLDERS’ EQUITY:

 

A reconciliation of the changes in our stockholders' equity is as follows:

 

 

See Note 16 for further discussion regarding the impact of our adoption of ASU No. 2016-01, Recognition and Measurement of Financial Assets and Financial Liabilities, on our consolidated financial statements. See Note 2 and Note 16 for further discussion regarding the impact of our adoption of ASU No. 2014-09, Revenue from Contracts with Customers, on our consolidated financial statements.

7. OTHER FINANCIAL STATEMENT DATA:

The components of our inventories were as follows:

The components of our accrued expenses were as follows:

Warranty costs:

We provide for the estimated cost of product warranties, which cover products for periods ranging from 1 to 3 years, at the time revenue is recognized. While we engage in extensive product quality programs and processes, including actively monitoring and evaluating the quality of components provided by suppliers, warranty obligations do arise. These obligations are affected by product failure rates, the costs of materials used and service delivery expenses incurred in correcting a product failure. If actual product failure rates and material or service delivery costs differ from our estimates, revisions to the estimated warranty liability are required and could be material. At the end of each reporting period, we revise our estimated warranty liability based on these factors. The current portion of our warranty liability is included as a component of accrued expenses. The long-term portion of our warranty liability is included as a component of other liabilities.

A reconciliation of the changes in our estimated warranty liability is as follows:

Deferred warranty revenue:

The current portion of our deferred warranty revenue is included as a component of advance customer payments. The long-term portion of our deferred warranty revenue is included as a component of other liabilities. A reconciliation of the changes in our deferred warranty revenue is as follows:

8. INTANGIBLE ASSETS: 

Intangible assets consist of the following:

Amortization expense for our intangible assets in the three and nine months ended September 30, 2018 and 2017 was as follows:

Amortization of patents has been classified as research and development expense in our statements of operations. Estimated aggregate amortization expense based on current intangible assets for the next five years is expected to be as follows: $38,000 for the remainder of 2018; $137,000 in 2019; $106,000 in 2020; $32,000 in 2021; $9,000 in 2022; and $9,000 in 2023.

Intangible and other long-lived assets are reviewed for impairment when events or changes in circumstances indicate that the carrying amount of the assets may not be recoverable. An impairment loss is recognized when future undiscounted cash flows expected to result from use of the asset and its eventual disposition are less than the carrying amount.

9. REVENUE CONCENTRATIONS, SIGNIFICANT CUSTOMERS AND GEOGRAPHIC AREAS:

The following table summarizes our revenue by product line:  

Export sales as a percentage of total sales in the three and nine months ended September 30, 2018 were 71% and 72%, respectively. Export sales as a percentage of total sales in the three and nine months ended September 30, 2017 were 66% and 73%, respectively. Virtually all of our export sales are negotiated, invoiced and paid in U.S. dollars. Export sales by geographic area are summarized below:

		Three Months Ended September 30,								Nine Months Ended September 30,
(In thousands)		2018				2017				2018				2017
Americas		$	355			$	159			$	568			$	976
Europe			4,093				2,543				9,360				9,114
Asia			7,090				4,959				22,948				18,933
Other			348				103				548				247
Total export sales		$	11,886			$	7,764			$	33,424			$	29,270

In the nine months ended September 30, 2018, sales to significant customer A accounted for 11% of our total revenue and sales to significant customer B accounted for 10% of our total revenue. As of September 30, 2018, accounts receivable from significant customer A were $677,000 and accounts receivable from significant customer B were $1.2 million.

10. NET INCOME (LOSS) PER SHARE:  

Basic net income (loss) per share is computed by dividing net income (loss) by the weighted average number of common shares outstanding during the period. Net income per diluted share is computed by dividing net income by the weighted average number of common and common equivalent shares outstanding during the period. Common equivalent shares consist of common shares to be issued upon exercise of stock options, upon vesting of restricted stock units, upon vesting of restricted shares and from purchases of shares under our Employee Stock Purchase Plan, as calculated using the treasury stock method. All common equivalent shares were excluded from the calculation of net loss per diluted share due to their anti-dilutive effect. The components of net income (loss) per basic and diluted share were as follows:

Potentially dilutive shares excluded from the calculations of net income (loss) per diluted share due to their anti-dilutive effect were as follows: 118,000 shares in the three months ended September 30, 2018; 285,000 shares in the nine months ended September 30, 2018; 575,000 shares in the three months ended September 30, 2017; and 411,000 shares in the nine months ended September 30, 2017.

11. OTHER COMPREHENSIVE INCOME (LOSS):  

 

Reclassification adjustments are made to avoid double counting for items included in other comprehensive income (loss) that are also recorded as part of net income.  Other comprehensive income (loss) consisted of the following:

---

 

12. INCOME TAXES:

We recorded income tax expense of $297,000 in the three months ended September 30, 2018, compared to an income tax benefit of $116,000 in the three months ended September 30, 2017. We recorded income tax expense of $444,000 in the nine months ended September 30, 2018, compared to income tax expense of $10,000 in the nine months ended September 30, 2017. Our income tax provision in the nine months ended September 30, 2018 reflected an effective income tax rate of approximately 21%. Our effective tax rate in the nine months ended September 30, 2018 was impacted by Global Intangible Low Tax Income (GILTI), U.S federal R&D tax credits and $70,000 of excess tax benefits from employee share-based payments. Our income tax provision in the nine months ended September 30, 2017 reflected an effective income tax rate of approximately 1%. Our effective tax rate in the nine months ended September 30, 2017 differed from the U.S. statutory tax rate of 34%, primarily due to $207,000 of excess tax benefits from employee share-based payments. We recognized $37,000 of excess tax benefits in the three months ended September 30, 2018. Excess tax benefits recognized in the three months ended September 30, 2017 were inconsequential.

We have significant deferred tax assets as a result of temporary differences between taxable income on our tax returns and U.S. GAAP income, research and development tax credit carry forwards and federal, state and foreign net operating loss carry forwards. A deferred tax asset generally represents future tax benefits to be received when temporary differences previously reported in our consolidated financial statements become deductible for income tax purposes, when net operating loss carry forwards could be applied against future taxable income, or when tax credit carry forwards are utilized on our tax returns. We assess the realizability of our deferred tax assets and the need for a valuation allowance based on the guidance provided in current financial accounting standards.

Significant judgment is required in determining the realizability of our deferred tax assets. The assessment of whether valuation allowances are required considers, among other matters, the nature, frequency and severity of any current and cumulative losses, forecasts of future profitability, the duration of statutory carry-forward periods, our experience with loss carry forwards not expiring unused and tax planning alternatives. In analyzing the need for valuation allowances, we considered our history of cumulative operating results for income tax purposes over the past three years in each of the tax jurisdictions in which we operate, our financial performance in recent quarters, statutory carry forward periods and tax planning alternatives. In addition, we considered both our near-term and long-term financial outlook. After considering all available evidence (both positive and negative), we concluded that recognition of valuation allowances for substantially all of our U.S. and Singapore deferred tax assets was not required at September 30, 2018.

The Inland Revenue Authority of Singapore is reviewing our 2016 and 2015 income tax returns. We do not presently anticipate that the outcome of these audits will have a significant impact on our financial position or results of operations.

13. SHARE REPURCHASE: 

 

In October 2017, our Board of Directors adopted a program authorizing the purchase of up to $3.0 million of shares of our common stock. The program expired on September 30, 2018. During the nine months ended September 30, 2018, no shares were repurchased under this program.

 

14. NEW LEASE OBLIGATION: 

We lease a 50,724 square foot mixed office and warehouse facility built to our specifications in Golden Valley, Minnesota, which functions as our corporate headquarters and primary manufacturing facility for our sensor and semiconductor products. We also lease a 10,165 square foot facility in Bloomington, Minnesota, the term of which expires on December 31, 2018. In May 2018, we finalized an amendment to the lease for our current Golden Valley, Minnesota facility that will become effective on January 1, 2019. The amendment provides that we will lease 61,208 square feet of space in our current facility in Golden Valley, Minnesota through July 31, 2026 (prior to the amendment, the lease provided for an expiration date of December 31, 2018). The increase in the size of the facility will allow us to conduct the operations currently carried out at our Bloomington, Minnesota facility in our current Golden Valley, Minnesota location. Future lease payments due under the amended lease for the period from January 1, 2019 through July 31, 2026, are approximately $7.9 million. We anticipate that our annual rental payments will increase by approximately $200,000 when the lease amendment becomes effective in January 2019. 

 

15. CONTINGENCIES: 

We are periodically a defendant in miscellaneous claims and disputes in the ordinary course of business. While the outcome of these matters cannot be predicted with certainty, management presently believes the disposition of these matters will not have a material effect on our financial position, results of operations or cash flows.

In the normal course of business to facilitate sales of our products and services, we at times indemnify other parties, including customers, with respect to certain matters. In these instances, we have agreed to hold the other parties harmless against losses arising out of intellectual property infringement or other types of claims. These agreements may limit the time within which an indemnification claim can be made, and almost always limit the amount of the claim. It is not possible to determine the maximum potential liability under these indemnification agreements due to the limited history of prior indemnification claims and the unique facts and circumstances involved in each particular agreement. Historically, payments made, if any, under these agreements have not had a material impact on our operating results, financial position or cash flows.

16. RECENT ACCOUNTING DEVELOPMENTS: 

In May 2014, the Financial Accounting Standards Board (the "FASB") issued Topic 606, which provided guidance on the recognition of revenue from contracts with customers. Revenue recognition depicts the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. Topic 606 also requires disclosures regarding the nature, amount, timing and uncertainty of revenue and cash flows arising from contracts with customers. We performed a review of the requirements of the new guidance and identified which of our revenue streams are within the scope of Topic 606. We applied the five-step model of the new standard to a selection of contracts within each of our revenue streams, and compared the results to our current accounting practices. We also performed detailed contract reviews to complete necessary adjustments to our existing accounting policies, and implemented changes to our processes and internal controls to capture new data and address changes in financial reporting. We expanded our consolidated financial statement disclosures to comply with the requirements of Topic 606. We adopted the new standard using the modified retrospective method, with the cumulative effect of initially applying the guidance recognized at the date of initial application. Our adoption of Topic 606 on January 1, 2018 resulted in a $218,000 decrease in retained earnings to record the cumulative effect adjustment. Adoption of Topic 606 increased our revenues in the three and nine months ended September 30, 2018 by $123,000 and $232,000 respectively, when compared to revenue recognition under Topic 605. Adoption of Topic 606 increased our net income in the three and nine months ended September 30, 2018 by $35,000 and $85,000, respectively, or approximately $0.01 per share in both periods.  

In January 2016, the FASB issued ASU No. 2016-01, Recognition and Measurement of Financial Assets and Liabilities, which revised the accounting related to (1) the classification and measurement of investments in equity securities and (2) the presentation of certain fair value changes for financial liabilities measured at fair value. ASU No. 2016-01 also amended certain disclosure requirements associated with the fair value of financial instruments. The new guidance requires the fair value measurement of investments in equity securities and other ownership interests in an entity that do not result in consolidation and are not accounted for under the equity method. Entities will need to measure these investments and recognize changes in fair value in net income. Entities will no longer be able to recognize unrealized holding gains and losses on equity securities they classify under current guidance as available-for-sale in other comprehensive income. ASU No. 2016-01 was effective beginning January 1, 2018 and resulted in a cumulative-effect adjustment to beginning retained earnings, except for guidance relative to equity securities without readily determinable fair values which is applied prospectively. Our adoption of ASU 2016-01 on January 1, 2018 resulted in a $44,000 increase in retained earnings and accumulated other comprehensive loss.

---

In February 2016, the FASB issued new lease accounting guidance, ASU No. 2016-02, Leases. Under the new guidance, at the commencement date, lessees will be required (a) to recognize a lease liability, which is a lessee's obligation to make lease payments arising from a lease, measured on a discounted basis, and (b) to record a right-of-use asset, which is an asset that represents the lessee’s right to use, or control the use of, a specified asset for the lease term. The new guidance is not applicable for leases with a term of 12 months or less. Lessor accounting is largely unchanged. U.S. public companies are required to apply the amendments in ASU No. 2016-02 for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years. Early application is permitted. As issued, ASU No. 2016-02 requires reporting companies to adopt the new standard using a modified retrospective transition approach for leases existing at, or entered into after, the beginning of the earliest comparative period presented in the financial statements.  In July 2018, the FASB issued ASU 2018-11, Leases (Topic 842), Targeted Improvements, which gives companies the option of applying the standard at the adoption date, rather than retrospectively to the earliest period presented in the financial statements, and recognize a cumulative-effect adjustment to the opening balance of retained earnings in the period of adoption. Under the new option afforded by ASU 2018-11, companies will not be required to restate the financial statements of prior periods, nor will they be required to provide the disclosures required by ASC 842 for those prior periods.  We anticipate that we will adopt ASU 2016-02 by utilizing the new option afforded by ASU 2018-11. We are currently evaluating the impact of the new standard on our consolidated financial statements. When implemented, the standard is expected to have a material impact as operating leases will be recognized on our consolidated balance sheet, with an increase to both assets and liabilities. We presently do not believe the standard will have a material impact on our results of operations. The impact of this ASU is non-cash in nature and will not affect our cash flows.

In January 2017, the FASB issued guidance on simplifying the test for goodwill impairment, ASU No. 2017-04, Simplifying the Test for Goodwill Impairment. Under the new standard, goodwill impairment would be measured as the amount by which a reporting unit's carrying value exceeds its fair value, but not in an amount in excess of the carrying value of goodwill. The new guidance eliminates the requirement to determine goodwill impairment by calculating the implied fair value of goodwill by hypothetically assigning the fair value of a reporting unit to all of its assets and liabilities as if that reporting unit had been acquired in a business combination. The new guidance is to be applied prospectively to impairment tests beginning January 1, 2020, with early adoption permitted. We are currently evaluating when we will adopt the new guidance.

In February 2018, the FASB issued ASU 2018-02, Reclassification of Tax Effects from Accumulated Other Comprehensive Income, which allows entities to elect an option to reclassify the stranded tax effects related to the application of the Tax Cuts and Jobs Act from accumulated other comprehensive loss to retained earnings. The guidance is effective January 1, 2019 with early adoption permitted, and can be applied either in the period of adoption or retrospectively to all applicable periods. We are currently evaluating the impact of the new guidance on our consolidated financial statements.

---

ITEM 2 - MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

FORWARD LOOKING STATEMENTS:

The following management’s discussion and analysis of the financial condition and results of operations of CyberOptics Corporation ("we", "us" and "our") contains a number of estimates and predictions that are forward looking statements rather than statements based on historical fact. Among other matters, we discuss (i) our level of anticipated revenues, gross margins, and expenses; (ii) the timing of orders and shipments of our existing products, particularly the SQ3000, our 3D automated optical inspection ("AOI") system; (iii) the timing of initial revenue and projected improvements in gross margins from sales of new products that have been recently introduced, that we have under development or that we anticipate introducing in the future; (iv) the amount of anticipated revenue and potential revenue opportunity from recently introduced new products or potential new products we may launch in the future; and (v) our assessment of trends in the general economy and their impact on the markets for our products. Although we have made these statements based on our experience and expectations regarding future events, there may be events or factors that we have not anticipated, and the accuracy of our forward-looking statements and estimates are subject to a number of risks, including those risks identified in our Annual Report on Form 10-K for the year ended December 31, 2017.

RESULTS OF OPERATIONS

General

As a leading global developer and manufacturer of high precision 3D sensors, our strategy is to leverage our 3D sensor technologies in our key vertical markets that consist of the surface mount technology ("SMT"), semiconductor and metrology markets. A key element in our strategy is the continued development and sale of new high precision 3D sensors based on our proprietary multi-reflection suppression ("MRS") technology.  We believe that MRS is a break-through optical technology for high precision inspection and metrology, with the potential to expand our markets in the future. Unlike competing technologies, our MRS technology has the ability to inhibit reflections and provide microscopic quality images at production line speeds.

Manufacturing yield challenges as electronics and semiconductors become more complex are driving the need for more precise inspection and metrology. As a result, we believe 3D inspection and metrology represent high-growth segments in both the SMT and semiconductor capital equipment markets. We expect a growing number of opportunities in the markets for SMT and semiconductor inspection, because our 3D MRS technology platform is well suited for many of these applications, particularly with respect to complex circuit boards and semiconductor mid-end, back-end and advanced packaging inspection applications. We are taking advantage of these market trends by deploying our 3D MRS sensor technology in the following products:

Revenue from MRS based products increased by $4.5 million or 43% to $15.0 million in the nine months ended September 30, 2018, from $10.5 million in the nine months ended September 30, 2017. We believe we will be able to increase sales of products based on our MRS technology in the SMT, semiconductor and metrology markets, including the markets for semiconductor mid-end and advanced packaging inspection applications. We anticipate increasing sales of these products by utilizing new original equipment manufacturer ("OEM") customers and system integrators and by expanding direct sales to end-user customers. Revenue from MRS based products is forecasted to grow significantly on a year-over-year basis in the fourth quarter of 2018.

20

---

We have significantly advanced our MRS-enabled 3D sensor technology as part of a research initiative aimed at applying our 3D MRS technology to semiconductor mid-end and advanced packaging inspection applications. Sales of SQ3000 systems for these applications have started using our high resolution 7-micron pixel sensor. Many customers for these applications are evaluating our next generation ultra-high resolution 3-micron pixel sensor capable of measuring feature sizes down to 30 microns accurately and at high speeds. We are targeting one micron, three-sigma accuracy, at speeds that would inspect more than 20 300 mm wafers per hour. We believe sales of MRS-enabled 3D optical sensors and systems for semiconductor mid-end and advanced packaging inspection applications represent significant long-term growth opportunities for us, and we expect sales of these sensors and systems to ramp up in 2019 and beyond.

We have continued to invest in our WaferSense® family of products because fabricators of semiconductors and other customers view these products as valuable tools for improving yields and productivity. Additional WaferSense applications are currently under development, and we believe WaferSense products will account for a growing proportion of our total revenue over the next few years.

Over the longer term, we believe that anticipated sales growth of our 3D MRS-enabled products and WaferSense sensors should increase our revenues and net income. We believe that we have the resources required to attain our growth objectives, given our available cash and marketable securities balances totaling $23.8 million at September 30, 2018.

Revenues

Our revenues increased by 41% to $16.7 million in the three months ended September 30, 2018, from $11.8 million in the three months ended September 30, 2017. Our revenues increased by 16% to $46.7 million in the nine months ended September 30, 2018, from $40.2 million in the nine months ended September 30, 2017. The following table sets forth revenues by product line for the three and nine months ended September 30, 2018 and 2017:

Revenues from sales of high precision 3D and 2D sensors increased by $1.4 million or 34% in the three months ended September 30, 2018, when compared to the three months ended September 30, 2017. Revenues from sales of high precision 3D and 2D sensors increased by $2.1 million or 16% in the nine months ended September 30, 2018, when compared to the nine months ended September 30, 2017. The revenue increases primarily resulted from higher sales of 3D MRS-enabled sensors. Sales of 3D MRS-enabled sensors increased by $710,000 or 64% to $1.8 million in the three months ended September 30, 2018, when compared to the three months ended September 30, 2017. Sales of 3D MRS-enabled sensors increased by $2.1 million or 61% to $5.5 million in the nine months ended September 30, 2018, when compared to the nine months ended September 30, 2017. Sales of legacy 2D LaserAlign sensors were also higher in the three months ended September 30, 2018, when compared to the same period last year. Sales of high precision 3D and 2D sensors are dependent on the success of our OEM customers selling products that incorporate our sensors. We believe sales of our new 3D MRS enabled sensors will represent an increasing percentage of our total high precision 3D and 2D sensor sales in the future. However, quarterly sales of high precision 3D and 2D sensors are prone to significant fluctuations, both sequentially and on a year-over-year basis. 

Revenues from sales of semiconductor sensors, principally our WaferSense product line, increased by $1.2 million or 55% in the three months ended September 30, 2018, when compared to the three months ended September 30, 2017. Revenues from sales of semiconductor sensors increased by $2.9 million or 37% in the nine months ended September 30, 2018, when compared to the nine months ended September 30, 2017. The revenue increases reflect favorable conditions in the markets for semiconductor equipment and manufacturing, the growing acceptance of our WaferSense products as important productivity enhancement tools by semiconductor manufacturers, and improved account penetration at major semiconductor manufacturers and capital equipment suppliers. We anticipate that the benefits from growing market awareness and new product introductions will lead to additional WaferSense product sales in future periods.

Revenues from sales of inspection and metrology systems increased by $2.3 million or 41% in the three months ended September 30, 2018, when compared to the three months ended September 30, 2017. Revenues from sales of inspection and metrology systems increased by $1.5 million or 8% in the nine months ended September 30, 2018, when compared to the nine months ended September 30, 2017. The revenue increases primarily resulted from higher sales of 3D MRS-enabled SQ3000 3D AOI systems, including the new SQ3000™ 3D CMM system. Sales of SQ3000 systems increased by $2.1 million or 92% to $4.3 million in the three months ended September 30, 2018, when compared to the three months ended September 30, 2017. Sales of SQ3000 systems increased by $1.9 million or 28% to $8.7 million in the nine months ended September 30, 2018, when compared to the nine months ended September 30, 2017.

We believe a growing number of companies are transitioning from 2D AOI to 3D AOI systems to meet the increasingly demanding product inspection requirements in the semiconductor, electronics and industrial markets. As a result, we believe demand for 3D AOI systems is growing rapidly. We anticipate sales of our 3D MRS enabled SQ3000 3D AOI systems, including the new SQ3000™ 3D CMM system, will represent an increasing percentage of our total inspection and metrology system sales in the future. Also, we expect that the competitive advantages of our unique 3D MRS technology will provide us with an opportunity to capture significant market share in the 3D AOI systems market. 

Export revenue totaled $11.9 million or 71% of our total revenue in the three months ended September 30, 2018, compared to $7.8 million or 66% of total revenue in the three months ended September 30, 2017. Export revenue totaled $33.4 million or 72% of total revenue in the nine months ended September 30, 2018, compared to $29.3 million or 73% of total revenue in the nine months ended September 30, 2017. The higher percentage of export revenue in the three months ended September 30, 2018, when compared to the three months ended September 30, 2017, was due to the increase in sales of 3D MRS-enabled sensors and SQ3000 3D AOI systems, a higher proportion of which are generally sold outside the United States. There was no significant change in export revenue as a percentage of total revenue in the nine months ended September 30, 2018, when compared to the nine months ended September 30, 2017.

Cost of Revenues and Gross Margin

Cost of revenues increased by $3.0 million or 48% to $9.2 million in the three months ended September 30, 2018, from $6.2 million in the three months ended September 30, 2017. Cost of revenues increased by $4.3 million or 20% to $25.7 million in the nine months ended September 30, 2018, from $21.4 million in the nine months ended September 30, 2017. The increases in cost of revenues were mainly due to the corresponding revenue increases in both periods. Revenues increased by 41% in the three months ended September 30, 2018, when compared to the three months ended September 30, 2017. Revenues increased by 16% in the nine months ended September 30, 2018, when compared to the nine months ended September 30, 2017. Revenue mix in the three and nine months ended September 30, 2018 also contributed to the changes in cost of revenues. Items included in cost of revenues that fluctuate with the level of sales include raw materials, direct labor and factory overhead costs.

Total gross margin as a percentage of revenue was 45% in both the three and nine months ended September 30, 2018, compared to 47% in both the three and nine months ended September 30, 2017. The reduction in gross margin percentage in both periods was mainly due to pricing pressures on 2D and 3D inspection systems in the broader SMT market, offset in part by a change in mix of products sold. 

Our markets are highly price competitive, particularly in the electronic assembly market. As a result, we have experienced continual pressure on our gross margins. We compensate for pressure to reduce the price of our products by introducing new products with more features and improved performance and through manufacturing cost reduction programs. Sales of many products that we have recently introduced or are about to introduce, including our current and future SQ3000 3D AOI systems, 3D MRS sensors and WaferSense products, have, or are expected to have, more favorable gross margins than many of our existing products. Our next generation 3D MRS-enabled sensor and system products are being designed for more complex and demanding inspection applications in the SMT and semiconductor markets. Sales prices and gross profit margins for these applications tend to be higher, when compared to the broader SMT market.

Operating Expenses

Research and development expenses were $2.2 million or 13% of revenue in the three months ended September 30, 2018, compared to $1.9 million or 16% of revenue in the three months ended September 30, 2017. Research and development expenses were $6.6 million or 14% of revenue in the nine months ended September 30, 2018, compared to $5.9 million or 15% of revenue in the nine months ended September 30, 2017. The increases in research and development expenses were the result of higher compensation costs due to hiring of additional employees, pay increases for existing employees and bonus accruals for employees who work in research and development. Current research and development expenditures are primarily focused on continued development of our MRS technology, including 3D sensor subsystems and commercialization of our next generation ultra-high resolution 3-micron pixel sensor, and ongoing development of new applications for our WaferSense product line.

Selling, general and administrative expenses were $3.9 million or 24% of revenue in the three months ended September 30, 2018, compared to $3.8 million or 32% of revenue in the three months ended September 30, 2017. Selling, general and administrative expenses were $12.4 million or 27% of revenue in the nine months ended September 30, 2018, compared to $11.8 million or 29% of revenue in the nine months ended September 30, 2017. The increases in selling, general and administrative expenses were due to higher bonus accruals and commissions paid to outside sales channel partners, resulting from increases in our sales and profitability in the three and nine months ended September 30, 2018, when compared to the same periods of 2017. Selling, general and administrative expenses in the three and nine months ended September 30, 2018 were decreased by an approximately $200,000 reduction in our allowance for doubtful accounts, primarily resulting from collection of a receivable that had been fully reserved for in a prior period. We do not expect further large reductions in our allowance for doubtful accounts in future periods.

 

Interest Income and Other

 

Interest income and other includes interest earned on investments and gains and losses from foreign currency transactions, including intercompany financing transactions associated with our subsidiaries in the United Kingdom, Singapore and China. We recognized losses from foreign currency transactions, primarily intercompany financing transactions, of $37,000 in the three months ended September 30, 2018, compared to losses from foreign currency transactions of $38,000 in the three months ended September 30, 2017. We recognized gains from foreign currency transactions, primarily intercompany financing transactions, of $102,000 in the nine months ended September 30, 2018, compared to losses from foreign currency transactions of $194,000 in the nine months ended September 30, 2017.

 

Income Taxes

 

 

 

Backlog

 

Backlog totaled $19.7 million at September 30, 2018, an increase from $13.8 million at June 30, 2018 and $11.2 million at September 30, 2017. Our products are typically shipped two weeks to two months after receipt of an order. Backlog at September 30, 2018 included $4.4 million of orders for MX600 systems, which are expected to be recognized as revenue in the first half of 2019. Sales of some inspection system products may require customer acceptance due to performance or other acceptance criteria included in the terms of sale. For these product sales, revenue is recognized at the time of customer acceptance. Our backlog at any time may vary significantly based on the timing of orders from OEM customers. In some instances, our OEM customers may place orders for shipment of products covering periods of nine months or longer. Accordingly, backlog may not be an accurate indicator of performance in the future.

 

23

---

Liquidity and Capital Resources

Our cash and cash equivalents increased by $689,000 in the nine months ended September 30, 2018. Cash provided by operating activities of $1.7 million, cash from sales and maturities of marketable securities totaling $6.5 million and proceeds from the exercise of stock options and share purchases under our Employee Stock Purchase Plan of $671,000, were offset in part by purchases of marketable securities of $7.0 million and fixed asset purchases and capitalized patent costs totaling $1.2 million. Our cash and cash equivalents fluctuate in part because of sales and maturities of marketable securities and investment of cash balances in marketable securities. Accordingly, we believe the combined balances of cash and marketable securities provide a more reliable indication of our available liquidity than cash balances alone. Combined balances of cash and marketable securities increased by approximately $1.1 million to $23.8 million as of September 30, 2018 from $22.7 million as of December 31, 2017.

Operating activities provided $1.7 million of cash in the nine months ended September 30, 2018. The amount of cash provided by operations was favorably impacted by our net income of $1.6 million. Net income was affected by non-cash expenses totaling $2.6 million for depreciation and amortization, provision for doubtful accounts, deferred income taxes, non-cash gains from foreign currency transactions, stock-based compensation costs, and gains and losses on our available-for-sale securities. Changes in operating assets and liabilities providing cash in the nine months ended September 30, 2018 included an increase in accounts payable of $1.1 million, an increase in advance customer payments of $638,000 and an increase in accrued expenses of $382,000. Changes in operating assets and liabilities using cash in the nine months ended September 30, 2018 included an increase in accounts receivable of $3.6 million, an increase in inventories of $387,000 and an increase in other assets of $692,000. Accounts payable increased due to the timing of inventory purchases, with more materials being acquired in the later part of the third quarter of 2018. The timing of these purchases resulted in a higher accounts payable balance at September 30, 2018. Advance customer payments increased due to receipt of deposits from customers for metrology products we expect to ship in the fourth quarter of 2018. Accrued expenses were up due to 2018 bonus accruals that we expect to pay in 2019. Accounts receivable increased due to the higher sales level in the third quarter of 2018, when compared to the fourth quarter of 2017. Inventories increased slightly in 2018 due to changes in anticipated product sales mix. Other assets were up due to payments for supplier deposits.  

Investing activities used $1.7 million of cash in the nine months ended September 30, 2018. Changes in the level of investment in marketable securities, resulting from purchases, sales and maturities of those securities, used $508,000 of cash in the nine months ended September 30, 2018. We also used $1.2 million of cash in the nine months ended September 30, 2018 to purchase fixed assets and to fund capitalized patent costs.

Financing activities from the exercise of stock options and share purchases under our Employee Stock Purchase Plan provided $671,000 of cash in the nine months ended September 30, 2018.

At September 30, 2018, we did not have any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities (which are used to establish off-balance sheet arrangements).

We lease a 50,724 square foot mixed office and warehouse facility built to our specifications in Golden Valley, Minnesota, which functions as our corporate headquarters and primary manufacturing facility for our sensor and semiconductor products. We also lease a 10,165 square foot facility in Bloomington, Minnesota, the term of which expires on December 31, 2018. In May 2018, we finalized an amendment to the lease for our current Golden Valley, Minnesota facility that will become effective on January 1, 2019. The amendment provides that we will lease 61,208 square feet of space in our current facility in Golden Valley, Minnesota through July 31, 2026 (prior to the amendment, the lease provided for an expiration date of December 31, 2018). The increase in the size of the facility will allow us to conduct the operations currently carried out at our Bloomington, Minnesota facility in our current Golden Valley, Minnesota location. Future lease payments due under the amended lease for the period from January 1, 2019 through July 31, 2026, are approximately $7.9 million. We anticipate that our annual rental payments will increase by approximately $200,000 when the lease amendment becomes effective in January 2019. 

In October 2017, our Board of Directors adopted a program authorizing the purchase of up to $3.0 million of shares of our common stock. The program expired on September 30, 2018. During the nine months ended September 30, 2018, no shares were repurchased under this program.

Our cash, cash equivalents and marketable securities totaled $23.8 million at September 30, 2018. We believe that our cash, cash equivalents and marketable securities, coupled with anticipated cash flow from operations, will be adequate to fund our cash flow needs for the foreseeable future.

CRITICAL ACCOUNTING POLICIES AND ESTIMATES:

 

The preparation of the financial information contained in this Form 10-Q requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and the related disclosure of contingent assets and liabilities. On an on-going basis, we evaluate these estimates, including those estimates related to revenue recognition, bad debts, warranty obligations, inventory valuation, intangible assets and income taxes. We base these estimates on historical experience and on various other assumptions that we believe are reasonable under the circumstances. These estimates form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Our actual results may differ from these estimates under different assumptions or conditions. These critical accounting policies are discussed in more detail in the Management’s Discussion and Analysis of Financial Condition and Results of Operations contained in our Annual Report on Form 10-K for the year ended December 31, 2017.

 

Change in Revenue Accounting

 

Effective January 1, 2018, we adopted ASU No. 2014-9, “Revenue from Contracts with Customers” and the related amendments (“Topic 606”) using the modified retrospective method. Topic 606 was applied to all uncompleted contracts by recognizing the cumulative effect of initially applying Topic 606 as an adjustment to the opening balance of equity at January 1, 2018. Therefore, the comparative financial information for the three and nine months ended September 30, 2017 has not been adjusted and continues to be reported under Topic 605, “Revenue Recognition”. 

 

Accounting for contracts recognized over time involves the use of various techniques to estimate total contract revenue and costs. Contract estimates are based on various assumptions to project the outcome of future events that may span multiple years. We review and update our contract-related estimates regularly, and record adjustments as needed. 

 

The adoption of Topic 606 caused changes for (1) the impact of volume discounts that represent a material right which will now be estimated and recognized over the contract life rather than on a prospective basis, and (2) revenue will be recognized over time as the products are manufactured under certain contracts where our product is customized rather than at shipment. These changes increased our revenues in the three and nine months ended September 30, 2018 by $123,000 and $232,000, respectively, when compared to revenue recognition under Topic 605 (see Note 16).  Adoption of Topic 606 increased our net income in the three and nine months ended September 30, 2018 by $35,000 and $85,000, respectively, or approximately $0.01 per share in both periods.

 

Performance Obligations

 

Under Topic 606, revenue is measured based on consideration specified in the contract with a customer.  A performance obligation is a promise in a contract to transfer a distinct good or service to the customer and is the unit of account in Topic 606. Revenue from all customers, including distributors, is recognized when a performance obligation is satisfied by transferring control of a product or service to a customer. Amounts billed to customers for shipping and handling are included in revenue. Taxes collected from customers and remitted to governmental authorities are excluded from revenue on the net basis of accounting. Accounts receivable are due under normal trade terms, typically 90 days or less.

 

Sales involving multiple performance obligations typically include the sale of an inspection system or metrology product, installation and training, and in some cases, an extended warranty. When a sale involves multiple performance obligations, we account for individual products and services separately if the customer can benefit from the product or service on its own or with other resources that are readily available to the customer and the product or service are separately identifiable from other promises in the arrangement. The consideration is allocated between separate performance obligations in proportion to their estimated stand-alone selling price. If the stand-alone selling price is not directly observable, we use the cost plus margin approach to estimate stand-alone selling price. Costs related to products delivered are recognized in the period revenue is recognized; including product warranties for periods ranging from 1 to 3 years (see Note 7).

 

Our performance obligations are satisfied at a point in time or over time as work progresses. Revenue from products and services transferred to customers at a point in time in the three and nine months ended September 30, 2018 totaled $15.4 million and $43.4 million, respectively, which represented 93% of our total revenue in both periods. Revenue from these contracts is recognized when obligations under the terms of the contract with our customer are satisfied; generally with the transfer of control upon shipment. Sales of some products may require customer acceptance due to performance or other acceptance criteria that is considered more than a formality. For these product sales, revenue is recognized upon notification of customer acceptance.

 

Revenue from products and services transferred to customers over time in the three and nine months ended September 30, 2018 totaled $1.2 million and $3.3 million, respectively, which represented 7% of our total revenue in both periods. Periodically, sensor product arrangements with our original equipment manufacturers (OEM's) will create an asset with no alternative use and include an enforceable right to payment. For these arrangements control is transferred over the manufacturing process; therefore, revenue is recognized over time utilizing an input method based on actual costs incurred in the manufacturing process to date relative to total expected production costs. For certain longer duration 3D scanning service projects, we progress bill as the services are performed. These arrangements create an asset with no alternative use and include an enforceable right to payment. For these arrangements, control is transferred over the hours incurred to complete the scanning project; therefore, revenue is recognized over time utilizing an input method based on actual hours incurred relative to total projected project hours. For maintenance and extended warranty contracts, revenue is recognized over time on a straight-line basis over the term of the contract as the customer simultaneously receives and consumes the benefits of the coverage.  

 

 

ITEM 3 – QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Not applicable.

ITEM 4 – CONTROLS AND PROCEDURES

a.          Under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, we evaluated the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”)). Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that, as of the end of the period covered by this report, our disclosure controls and procedures were effective in ensuring that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in applicable rules and forms and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, in a manner that allows timely decisions regarding required disclosure.

b.          There was no change in our internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) that occurred during the period covered by this quarterly report that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

 

 

PART II. OTHER INFORMATION

ITEM 1 – LEGAL PROCEEDINGS

 

None.

 

ITEM 1A – RISK FACTORS

 

In addition to the other information set forth in this report, you should carefully consider the factors discussed in Part I “Item 1A. Risk Factors” in our Annual Report on Form 10-K for the year ended December 31, 2017, which could materially affect our business, financial condition or future results.

 

ITEM 2 – UNREGISTERED SALES OF EQUITY SECURITIES, USE OF PROCEEDS AND ISSUER PURCHASES OF EQUITY SECURITIES

 

None.

 

ITEM 3 – DEFAULTS UPON SENIOR SECURITIES

 

None.

 

ITEM 4 – MINE SAFETY DISCLOSURES

 

None.

 

ITEM 5 – OTHER INFORMATION

 

None.

 

ITEM 6 – EXHIBITS

 

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

	CYBEROPTICS CORPORATION
	/s/ Subodh Kulkarni
	By Subodh Kulkarni, President and Chief Executive Officer
	(Principal Executive Officer and Duly Authorized Officer)
	/s/ Jeffrey A. Bertelsen
	By Jeffrey A. Bertelsen, Vice President, Chief Financial Officer and Chief Operating Officer
	(Principal Accounting Officer and Duly Authorized Officer)

 

Dated: November 6, 2018