Eargo, Inc. - Quarter Report: 2021 March (Form 10-Q)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

FORM 10-Q

(Mark One)

For the quarterly period ended March 31, 2021

OR

For the transition period from                      to                     

Commission File Number: 001-39616

Eargo, Inc.

(Exact Name of Registrant as Specified in its Charter)

Registrant’s telephone number, including area code: (650) 351-7700

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.     Yes  ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).     Yes  ☒    No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).     Yes  ☐    No  ☒

As of May 5, 2021, the registrant had 38,731,538 shares of common stock, par value $0.0001 outstanding.

Table of Contents

i

Special note regarding forward-looking statements

This Quarterly Report on Form 10-Q contains forward-looking statements about us and our industry that involve substantial risks, uncertainties and assumptions. All statements other than statements of historical facts contained in this Quarterly Report on Form 10-Q, including statements regarding our strategy, future financial condition, future operations, projected costs, prospects, plans, objectives of management and expected market growth, are forward-looking statements. In some cases, you can identify forward-looking statements by terminology such as “aim,” “anticipate,” “assume,” “believe,” “contemplate,” “continue,” “could,” “design,” “due,” “estimate,” “expect,” “goal,” “intend,” “may,” “objective,” “plan,” “positioned,” “potential,” “predict,” “seek,” “should,” “target,” “will,” “would” and other similar expressions that are predictions of or indicate future events and future trends, or the negative of these terms or other comparable terminology. These forward-looking statements include, but are not limited to, statements about:

We have based these forward-looking statements largely on our current expectations, estimates, forecasts and projections about future events and financial trends that we believe may affect our financial condition, results of operations, business strategy and financial needs. In light of the significant uncertainties in these forward-looking statements, you should not rely upon forward-looking statements as predictions of future events. Although we believe that we have a reasonable basis for each forward-looking statement contained in this Quarterly Report on Form 10-Q, we cannot guarantee that the future results, levels of activity, performance or events and circumstances reflected in the forward-looking statements will be achieved or occur at all. You should refer to the section titled “Risk Factors” for a discussion of important factors that may cause our actual results to differ materially from those expressed or implied by our forward-looking statements. Furthermore, if our forward-looking statements prove to be inaccurate, the inaccuracy may be material. Except as required by law, we undertake no obligation to publicly update any forward-looking statements, whether as a result of new information, future events or otherwise.

1

PART I—FINANCIAL INFORMATION

Item 1. Financial Statements.

Eargo, Inc.

Condensed Consolidated Balance Sheets

(Unaudited)

(In thousands, except share and per share amounts)

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements.

2

Eargo, Inc.

Condensed Consolidated Statements of Operations and Comprehensive Loss

(Unaudited)

(In thousands, except share and per share amounts)

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements.

3

Eargo, Inc.

Condensed Consolidated Statements of Convertible Preferred Stock and Stockholders’ Equity (Deficit)

(Unaudited)

(In thousands, except share amounts)

4

Eargo, Inc.

Condensed Consolidated Statements of Cash Flows

(Unaudited)

(In thousands)

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements.

5

Eargo, Inc.

Notes to Unaudited Condensed Consolidated Financial Statements

1. Description of business

Eargo, Inc. (the “Company”) is a medical device company dedicated to improving the quality of life of people with hearing loss. The Eargo solution was developed to create a hearing aid that consumers actually want to use. The Company’s innovative product and go-to-market approach address the major challenges of traditional hearing aid adoption, including social stigma, accessibility and cost.

Liquidity

The Company has incurred losses and negative cash flows from operations since its inception and management expects to incur additional substantial losses in the foreseeable future. As of March 31, 2021, the Company had cash and cash equivalents of $201.6 million and an accumulated deficit of $212.7 million.

The Company believes that its existing cash and cash equivalents as of March 31, 2021 will be sufficient for the Company to continue as a going concern for at least one year from the date these unaudited condensed consolidated financial statements are filed with the Securities and Exchange Commission (“SEC”). The Company’s future capital requirements will depend on many factors, including its growth rate, the timing and extent of its spending to support research and development activities and the timing and cost of establishing additional sales and marketing capabilities.

2. Summary of significant accounting policies

Basis of presentation and principles of consolidation

The accompanying unaudited condensed consolidated financial statements have been prepared in accordance with generally accepted accounting principles in the United States of America (“GAAP”) and applicable rules and regulations SEC regarding interim financial reporting of Eargo, Inc. and its wholly owned subsidiary. All intercompany balances and transactions have been eliminated.

These unaudited interim condensed consolidated financial statements have been prepared on the same basis as the annual consolidated financial statements and, in the opinion of management, reflect all adjustments, which include only normal recurring adjustments, necessary to present fairly the Company’s consolidated financial position, results of operations and cash flows. The results of operations for the three months ended March 31, 2021 are not necessarily indicative of the results to be expected for the year ending December 31, 2021 or for any other future annual or interim period. The condensed consolidated balance sheet as of December 31, 2020 included herein was derived from the audited consolidated financial statements as of that date. The unaudited condensed consolidated financial statements should be read in conjunction with the Company’s audited consolidated financial statements and related notes included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2020, filed with the SEC on March 16, 2021.

Use of estimates

The preparation of condensed consolidated financial statements in conformity with GAAP requires management to make estimates, assumptions, and judgments that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities as of the date of the unaudited condensed consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. Significant estimates and assumptions made in the accompanying unaudited condensed consolidated financial statements include, but are not limited to, allowance for sales returns, the fair value of lease liabilities, the fair value of equity securities, the fair value of financial instruments, the allowance for doubtful accounts, the net realizable value of inventory, the useful lives of long-lived assets, accrued product warranty reserve, certain other accruals and recoverability of the Company’s net deferred tax assets and the related valuation allowance. Management periodically evaluates its estimates, which are based on historical experience and on various other assumptions that are believed to be reasonable under the circumstances. Actual results may differ from those estimates.

Significant accounting policies

There have been no significant changes to the accounting policies during the three months ended March 31, 2021, as compared to the significant accounting policies described in Note 2 of the “Notes to Consolidated Financial Statements” in the Company’s audited consolidated financial statements included in the Annual Report on Form 10-K, except as discussed below.

6

Eargo, Inc.

Notes to Unaudited Condensed Consolidated Financial Statements

Concentration of credit risk

Financial instruments that potentially subject the Company to concentrations of credit risk consist of demand deposit accounts, money market accounts and accounts receivable, including credit card receivables. The Company maintains its cash and cash equivalents, which may, at times, exceed federally insured limits, with financial institutions of high credit standing. As of March 31, 2021, the Company has not experienced any losses on its deposit accounts and money market accounts. As of March 31, 2021, the Company does not believe there is significant financial risk from nonperformance by the issuers of the Company’s deposit accounts and money market accounts.

Approximately 57% and 45% of the Company’s gross accounts receivable are related to reimbursement from a single insurance company as of March 31, 2021 and December 31, 2020, respectively.

Accounts receivable, net

Accounts receivable represents amounts due from third-party institutions for credit card and debit card transactions and trade accounts receivable. Accounts receivable are recorded at invoiced amounts, net of allowances for doubtful accounts. The allowance for doubtful accounts is based on the Company’s assessment of the collectibility of accounts. Management regularly reviews the adequacy of the allowance for doubtful accounts by considering the age of each outstanding invoice, each customer’s expected ability to pay, and the collection history with each customer, when applicable, to determine whether a specific allowance is appropriate. As of March 31, 2021 and December 31, 2020, the Company recorded an allowance for doubtful accounts of $1.6 million and $1.9 million, respectively. The allowance for doubtful accounts charges are recorded as a component of general and administrative expenses in the condensed consolidated statements of operations and comprehensive loss.

Revenue recognition

The Company’s revenue is generated from the sale of products (hearing aid systems and related accessories) and services (extended warranties). These products and services are primarily sold directly to customers through the Eargo website and the Company sales representatives.

Under ASC 606, revenue is recognized when promised goods or services are transferred to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services by following a five step process: (i) identify the contract(s) with a customer; (ii) identify the performance obligations in the contract; (iii) determine the transaction price; (iv) allocate the transaction price to the performance obligations in the contract; and (v) recognize revenue when (or as) the entity satisfies a performance obligation.

Identify the contract with a customer. The Company generally considers completion of an Eargo sales order (which requires customer acceptance of the Company’s click-through terms and conditions for website sales and authorization of payment through credit card or another form of payment for sales made over the phone) as a customer contract provided that collection is considered probable. For payments that are not made upfront by credit card, the Company assesses insurance eligibility or customer creditworthiness based on credit checks, payment history, and/or other circumstances. For payments involving insurance payors, the Company validates customer eligibility and reimbursement amounts prior to shipping the product.

Identify the performance obligations in the contract. Product performance obligations include hearing aid systems and related accessories and service performance obligations include extended warranty coverage. The Company also offers customers a one-time replacement of certain components of the hearing aid system for a fee (i.e., “loss and damage policy”), which represents an option with material right. However, as the historical redemption rate under the policy has been low, the option is not accounted for as a separate performance obligation. The Company does not assess whether promised goods or services are performance obligations if they are immaterial in the context of the contract with the customer.

The Company has elected to treat shipping and handling activities performed after a customer obtains control of products as a fulfillment activity.

Determine the transaction price and allocation to performance obligations. The transaction price in the Company’s customer contracts consists of both fixed and variable consideration. Fixed consideration includes amounts to be contractually billed to the customer while variable consideration includes the 45-day right of return that applies to all products. To estimate product returns, the Company analyzes historical return levels, current economic trends, and changes in customer demand. Based on this information, the Company reserves a percentage of product sale revenue and accounts for the estimated impact as a reduction in the transaction price.

Allocate the transaction price to the performance obligations in the contract. For contracts that contain multiple performance obligations, the Company allocates the transaction price to the performance obligations on a relative standalone selling price basis.

7

Eargo, Inc.

Notes to Unaudited Condensed Consolidated Financial Statements

Standalone selling prices are based on multiple factors including, but not limited to, historical discounting trends for products and services, gross margin objectives, internal costs, competitor pricing strategies, and industry technology lifecycles.

Recognize revenue when or as the Company satisfies a performance obligation. Revenue for products (hearing aid systems and related accessories) is recognized at a point in time, which is generally upon shipment. Revenue for services (extended warranty) is recognized over time on a ratable basis over the warranty period.

Contract costs

The Company applies the practical expedient to recognize the incremental costs of obtaining a contract as expense when incurred if the amortization period would be one year or less. These incremental costs include processing fees paid to third-party financing vendors, who provide the Company’s customers with the option to finance their purchases. If a customer elects to utilize this service, the Company receives a non-recourse upfront payment for the product sold, less processing fee withheld by the financing vendor. These processing fees are recognized in cost of revenue in the condensed consolidated statements of operations and comprehensive loss as incurred.

Net loss per share attributable to common stockholders

The Company follows the two-class method when computing net loss per share in periods in which shares that meet the definition of participating securities are outstanding. The two-class method determines net loss per share for each class of common and participating securities according to dividends declared or accumulated and participation rights in undistributed earnings. The two-class method requires income available to common stockholders for the period to be allocated between common and participating securities based upon their respective rights to receive dividends as if all income for the period had been distributed.

Basic net loss per share attributable to common stockholders is calculated by dividing the net loss attributable to common stockholders by the weighted-average number of shares of common stock outstanding for the period, without consideration for potential dilutive securities. Diluted net income loss attributable to common stockholders is computed by adjusting net loss attributable to common stockholders to reallocate undistributed earnings based on the potential impact of dilutive securities. Diluted net loss per share is computed by dividing the net loss by the weighted-average number of common shares and common share equivalents of potentially dilutive securities outstanding for the period. For purposes of the diluted net loss per share calculation, convertible preferred stock, convertible notes, convertible preferred stock warrants and common stock options are considered to be potentially dilutive securities.

Recent accounting pronouncements not yet adopted

In June 2016, the FASB issued ASU 2016-13, Financial Instruments—Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instruments, which replaces the existing incurred loss impairment model with an expected credit loss model and requires a financial asset measured at amortized cost to be presented at the net amount expected to be collected. This new standard is effective for the Company in the fiscal year beginning January 1, 2023 and must be adopted using a modified retrospective approach, with certain exceptions. The Company is currently evaluating the impact of this standard on its condensed consolidated financial statements.

In December 2019, the FASB issued ASU No. 2019-12, Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes, which is intended to simplify the accounting for income taxes. This standard removes certain exceptions to the general principles in Topic 740 and also clarifies and amends existing standards to improve consistent application. This new standard is effective for the Company in the fiscal year beginning January 1, 2022. An entity that elects early adoption must adopt all the amendments in the same period. The Company is currently evaluating the impact of this standard on its condensed consolidated financial statements.

3. Fair value measurements

There were no financial assets and liabilities outstanding that were remeasured at fair value on a recurring basis as of March 31, 2021 or December 31, 2020.

The carrying amounts reflected in the condensed consolidated balance sheets for cash and cash equivalents, accounts receivable, accounts payable and accrued liabilities approximate their fair values due to their short-term nature. The fair value of the Company’s outstanding term loan is estimated using the net present value of the payments, discounted at an interest rate that is consistent with a market interest rate. The fair value of the outstanding term loan approximates the carrying amount as the term loan bears a floating rate that approximates the market interest rate.

8

Eargo, Inc.

Notes to Unaudited Condensed Consolidated Financial Statements

4. Balance sheet components

Inventories

Inventories consist primarily of raw materials related to component parts and finished goods. The following is a summary of the Company’s inventories by category:

Property and equipment, net

Property and equipment, net, consists of the following:

Depreciation and amortization for the three months ended March 31, 2021 and 2020 amounted to $0.7 million and $0.6 million, respectively, which includes amortization of capitalized software costs of $0.2 million and $0.2 million, respectively.

Accrued expenses

Accrued expenses consist of the following:

Accrued warranty reserve

The accrued warranty reserve consists of the following activity:

9

Eargo, Inc.

Notes to Unaudited Condensed Consolidated Financial Statements

5. Commitments and contingencies

Operating leases

The Company has entered into non-cancelable operating leases for its offices. These leases generally contain scheduled rent increases and renewal options, which are not included in the determination of lease term unless the Company is reasonably certain that the renewal option would be exercised.

In February 2021, the Company amended the operating lease for its Nashville, Tennessee office to extend the term of the initial lease through March 2023 and reduce the size of office space leased. This extension was accounted for as a lease modification and the Company recorded an increase to the right-of-use (“ROU”) asset and lease liability of $0.4 million at the time of the amendment.

As of March 31, 2021, the Company recorded an aggregate ROU asset of $1.2 million and an aggregate lease liability of $1.3 million in the accompanying condensed consolidated balance sheet. The ROU asset and corresponding lease liability were estimated using a weighted-average incremental borrowing rate of 7.1%. The weighted-average remaining lease term is 1.3 years.

For the three months ended March 31, 2021, the Company incurred $0.3 million of operating lease costs. Variable lease payments for operating expenses and costs related to short-term leases were immaterial for the three months ended March 31, 2021.

As of March 31, 2021, undiscounted future minimum lease payments due under the non-cancelable operating leases are as follows:

Litigation

The Company may become involved in legal proceedings in the ordinary course of its business. The Company does not believe that any lawsuits or claims currently pending against it, individually or in the aggregate, are material, or will have a material adverse effect on its financial condition, results of operations or cash flows. The Company is subject to review from federal and state taxing authorities in order to validate the amounts of income, sales and/or use taxes which have been claimed and remitted. The Company has estimated exposure and established reserves for its estimated sales tax audit liability.

In the normal course of business, the Company may agree to indemnify third parties with whom it enters into contractual relationships, including customers, lessors, and parties to other transactions with the Company, with respect to certain matters. The Company has agreed, under certain conditions, to hold these third parties harmless against specified losses, such as those arising from a breach of representations or covenants, other third-party claims that the Company’s products, when used for their intended purposes, infringe the intellectual property rights of such other third parties, or other claims made against certain parties. It is not possible to determine the maximum potential amount of liability under these indemnification obligations due to the Company’s limited history of prior indemnification claims and the unique facts and circumstances that are likely to be involved in each particular claim.

6. Debt obligations

2018 Loan Agreement

In June 2018, the Company entered into a Loan and Security Agreement (the “2018 Loan Agreement”) with Silicon Valley Bank. Under the terms of the 2018 Loan Agreement, Silicon Valley Bank made available to the Company term loans in an aggregate principal amount of $12.5 million and the Company borrowed $5.0 million in October 2018, $1.0 million in November 2018 and $1.0 million in December 2018.

In connection with the execution of the 2018 Loan Agreement, the Company issued warrants to purchase 30,173 shares of Series C convertible preferred stock. The estimated fair value of the warrants at issuance was recorded as a discount on the loan and is amortized to interest expense over the term of the agreement using the effective interest method.

10

Eargo, Inc.

Notes to Unaudited Condensed Consolidated Financial Statements

Amendments to the 2018 Loan Agreement

In January 2019, the Company executed the First Amendment to the Loan and Security Agreement, which extended the interest-only period for all borrowings under the agreement until January 2020. No other terms were amended. In June 2019, the Company borrowed an additional $5.0 million to increase the total principal balance to $12.0 million. In connection with the June 2019 borrowing, the Company issued Silicon Valley Bank warrants to purchase 14,999 shares of Series C convertible preferred stock.

In May 2020, the Company executed the Second Amendment to its Loan and Security Agreement, which deferred the principal payments due between May 2020 and July 2020 such that the deferred amounts will be repaid in equal monthly payments that started in August 2020 through the scheduled maturity of the loan in June 2022. The amendment was accounted for as a modification.

In September 2020, the Company executed the Third Amendment to the Loan and Security Agreement (the “Third Amendment”), under which Silicon Valley Bank made available to the Company additional term loans in an aggregate principal amount of $20.0 million through December 31, 2020. The Company borrowed $15.0 million in September 2020 and used $10.2 million of the proceeds to repay the outstanding balance of $9.5 million and final payment fee of $0.7 million, or 6.0% of the original aggregate principal amount, on the existing term loan. The Company’s ability to borrow any additional principal under the Third Amendment expired unused on December 31, 2020.

The term loan under the Third Amendment matures in September 2024 with interest-only monthly payments until January 2022, which was extended to July 2022 upon the completion of the Company’s initial public offering (“IPO”) in October 2020. The term loan accrues interest at a per annum rate equal to the Wall Street Journal prime rate plus 1.0% (4.25% as of March 31, 2021) and includes a final payment fee equal to 6.25% of the original aggregate principal amount. In connection with the execution of the Third Amendment, the Company issued Silicon Valley Bank a warrant to purchase 53,487 shares of Series E convertible preferred stock. The amendment was accounted for as a modification.

Borrowings under the Third Amendment are collateralized by substantially all the assets of the Company, excluding intellectual property (but including rights to payment and proceeds thereof). The Third Amendment contains customary affirmative and restrictive covenants, including with respect to the Company’s ability to enter into fundamental transactions, incur additional indebtedness, grant liens, pay any dividend or make any distributions to its holders, make investments, merge or consolidate with any other person or engage in transactions with the Company’s affiliates, but do not include any financial covenants. The Company was in compliance with all of the covenants as of March 31, 2021.

As of March 31, 2021, outstanding principal on the term loan and accrual for the final payment fee amounted to $15.2 million. During the three months ended March 31, 2021 and 2020, the Company recognized interest expense related to the term loans of $0.3 million and $0.2 million, respectively, which is inclusive of amortization of debt discount. The effective interest rate was 7.12% as of March 31, 2021.

7. Stock-based compensation

Total stock-based compensation is as follows:

Stock-based compensation costs capitalized as part of capitalized software costs was $0.3 million during the three months ended March 31, 2021. No such costs were capitalized during the three months ended March 31, 2020.

11

Eargo, Inc.

Notes to Unaudited Condensed Consolidated Financial Statements

Determination of fair value

The estimated grant-date fair value of the Company’s stock-based awards was calculated using the Black-Scholes option pricing model, based on the following assumptions:

Equity incentive plans

As of March 31, 2021, 6,053,922 shares of common stock are issuable upon the exercise of outstanding awards under the 2010 Equity Incentive Plan. As of March 31, 2021, the Company had reserved 6,877,638 shares of common stock for issuance under the 2020 Equity Incentive Plan (the “2020 Plan”), of which 6,359,105 are available for issuance in connection with grants of future awards.

Stock option activity for the three months ended March 31, 2021 is set forth below:

The weighted-average grant-date fair value of options granted during the three months ended March 31, 2021 and 2020 were $29.13 and $5.63 per share, respectively.

The aggregate intrinsic values of options outstanding and vested and exercisable were calculated as the difference between the exercise price of the options and the fair value of the Company’s common stock.

As of March 31, 2021, total unrecognized stock-based compensation related to outstanding unvested stock options was $17.9 million, which the Company expects to recognize over a remaining weighted-average period of 3.0 years.

Restricted stock units

Restricted stock units (“RSUs”) granted under the 2020 Plan are share awards that entitle the holder to receive freely tradable shares of the Company’s common stock upon vesting. RSUs cannot be transferred and the awards are subject to forfeiture if the holder’s service to the Company terminates prior to the release of the vesting restrictions. The fair value of the RSUs is equal to the closing price of the Company’s common stock on the grant date.

RSU activity for the three months ended March 31, 2021 is set forth below:

12

Eargo, Inc.

Notes to Unaudited Condensed Consolidated Financial Statements

Employee Stock Purchase Plan (ESPP)

In October 2020, the Board of Directors and stockholders adopted and approved the 2020 Employee Stock Purchase Plan (the “ESPP”). As of March 31, 2021, the Company reserved 1,109,239 shares of common stock for future issuance under the ESPP. The ESPP provides for consecutive, overlapping 24-month offering periods, which are generally divided into four purchase periods of approximately six months. The offering periods are scheduled to start on the first trading day on or after May 16 and November 16 of each year, with exception of the first offering period which commenced on October 16, 2020, the first trading day after the effective date of the Company’s registration statement, and will end on November 15, 2022. Contributions under the ESPP are generally limited to a maximum of 15% of an employee’s eligible compensation.

Each offering period consists of four six-month purchase periods. On each purchase date, which falls on the last date of each purchase period, ESPP participants will purchase shares of common stock at a price per share equal to 85% of the lesser of (1) the fair market value per share of the common stock at the start of the offering period or (2) the fair market value of the common stock on the purchase date.

The Company recorded $3.4 million of stock-based compensation related to the ESPP for the three months ended March 31, 2021. The fair value of the ESPP shares is estimated using the Black-Scholes option pricing model.

8. Net loss per share attributable to common stockholders

The following outstanding potentially dilutive common stock equivalents have been excluded from the computation of diluted net loss per share for the periods presented due to their anti-dilutive effect:

13

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

You should read the following discussion and analysis of our financial condition and results of operations together with our unaudited condensed consolidated financial statements and the related notes thereto included in Part I, Item 1 of this Quarterly Report on Form 10-Q, and for a full understanding of Eargo’s results of operations and financial condition, in conjunction with the consolidated financial statements and notes for the fiscal year ended December 31, 2020 contained in the Company’s Form 10-K filed on March 16, 2021. As a result of many factors, including those factors set forth in the “Risk factors” section of this Quarterly Report on Form 10-Q, our actual results could differ materially from the results described in or implied by these forward-looking statements. You should carefully read the “Risk factors” to gain an understanding of the important factors that could cause actual results to differ materially from our forward-looking statements.

Overview

We are a medical device company dedicated to improving the quality of life of people with hearing loss. We developed the Eargo solution to create a hearing aid that consumers actually want to use. Our innovative product and go-to-market approach address the major challenges of traditional hearing aid adoption, including social stigma, accessibility and cost.

We believe our Eargo hearing aids are the first and only virtually invisible, rechargeable, completely-in-canal, FDA regulated, exempt Class I or Class II devices for the treatment of hearing loss. Our rapid pace of innovation is enabled by our deep industry and technical expertise across mechanical engineering, product design, audio processing, clinical and hearing science, consumer electronics and embedded software design, and is supported by our strategic intellectual property portfolio.

We market and sell our hearing aids direct to consumers with a personalized, consumer-centric approach. Our commercial organization consists of a talented marketing team with deep experience in consumer-focused brand and performance marketing, a team of inside sales consultants, and a dedicated customer support team of licensed hearing professionals. We generate revenue from orders processed primarily through our website and over the phone by our sales consultants.

We believe that our differentiated hearing aids, consumer-oriented approach and strong brand have fueled the rapid adoption of our hearing aids and high customer satisfaction, as evidenced by over 68 thousand Eargo hearing aid systems sold, net of returns, as of March 31, 2021.

On October 20, 2020, we completed our IPO pursuant to which we sold an aggregate of 9,029,629 shares of our common stock resulting in net proceeds of $148.5 million after deducting underwriting discounts, commissions and offering expenses.

For the three months ended March 31, 2021, we generated net revenue of $22.0 million, an increase of $9.4 million from the three months ended March 31, 2020. To date, all our revenue has been generated from customers in the United States.

Our net losses were $13.6 million and $11.7 million for the three months ended March 31, 2021 and 2020, respectively. As of March 31, 2021, we had an accumulated deficit of $212.7 million. We expect to continue to incur losses for the foreseeable future.

Factors affecting our business

We believe that our future performance will depend on many factors, including those described below and in the section titled “Risk Factors” included elsewhere in this Quarterly Report on Form 10-Q.

Efficient acquisition of new customers

We have spent and expect to continue to spend significant amounts on sales and marketing designed to build a strong brand, achieve broad awareness of our Eargo solution, acquire new customers and convert sales leads. We have also invested and expect to continue investing in growing our teams of sales consultants and licensed hearing professionals to keep pace with increased demand, converting leads into satisfied customers and potentially growing our revenue.

Third-party payors

A significant portion of our revenue depends on payments from a concentrated number of third-party payors that we submit claims to on behalf of our customers. We expect to continue to focus substantial resources on both securing existing third-party reimbursement and increasing coverage and reimbursement for our current products and any future products we may develop. We are actively engaged in efforts to access the growing insurance coverage for hearing aids, including contracting or partnering with third-party payors, associations, and employers who offer hearing aid coverage to their members. Increasing the number of health plans we have access to would allow us to serve more customers who have access to some financial help paying for hearing aids.

14

Sales return rate

Our return policy allows our customers to return hearing aids for any reason within the first 45 days of delivery for a full refund, subject to a handling fee in certain states. The most commonly cited reason for returning our hearing aids is unsatisfactory fit, which we believe is a byproduct of our direct-to-consumer model and online distribution that results in nearly all of our customers ordering our product without trying it first. In addition to unsatisfactory fit, the next most cited reason for returns is that our hearing aids do not provide sufficient audio amplification. Customer return accrual rates were approximately 26% and 23% for the year ended December 31, 2020 and for the three months ended March 31, 2021, respectively. The decline in our sales return rate in 2020 and in the three months ended March 31, 2021 was a result of the growth in customers with health insurance coverage for hearing aids and repeat customers which have generally lower return rates than other customers, and our initiatives to improve customer service and enhance the quality of our pre-screening assessments. We report revenue net of expected returns, which is an estimate informed in part by historical return rates. As such, our return rate impacts our reported net revenue and profitability. If actual sales returns differ significantly from our estimates, an adjustment to revenue in the current or subsequent period is recorded.

New product introductions

Our technical capabilities and commitment to innovation have allowed us to deliver product enhancements on a rapid development timeline and support a compelling new product roadmap that we believe will continue to differentiate our competitive position over the next several years. With the launch of the Eargo Neo HiFi in January 2020, we have launched four generations of our hearing aids since 2017, with each iteration having improved audio performance, physical fit and/or comfort. We are focused on continuing to launch new versions of the Eargo hearing solution that further improve audio quality, fit, comfort and/or ease-of-use. We believe that the continued introduction of new products is critical to maintaining existing customers and increasing adoption of our solution, and as such, we expect to continue to invest in research and development to support new product introductions. In connection with our product innovation and iteration, we also need to successfully manage our product transitions to avoid delays in customer purchases, excess or obsolete inventory and increased returns as customers wait for our new products to become available. Our development priorities are focused, in part, on adding a refurbishment capability for returned hearing aids, which would allow us to refurbish and re-sell returned devices, which we anticipate would benefit our gross margin, although there is no guarantee that these efforts will succeed.

Seasonality

Prior to the effects of COVID-19, we have experienced and expect to continue to experience seasonality in our business, with higher sales volumes in quarters when we launch new products and in the fourth calendar quarter as a result of holiday promotional activity.

COVID-19 pandemic

We believe the COVID-19 pandemic thus far has largely resulted in favorable trends for our business. We believe that shelter-in-place restrictions and increased reluctance of consumers to be exposed to the virus, particularly among older consumers that comprise a majority of the population needing hearing aids, have increased customer interest to consider our vertically integrated telecare model. We believe our sales model can help consumers decrease their risk of potential exposure to COVID-19 by avoiding multiple trips to hearing aid clinics and close proximity to audiologists and other individuals at such clinics, which are part of the traditional hearing aid sales model.

Although we believe the COVID-19 pandemic has largely resulted in favorable trends for our business, we have experienced business disruptions, particularly at our California headquarters, where a majority of our employees have been working remotely. Moreover, travel restrictions, factory closures and disruptions in our supply chain could happen and we may not be able to obtain adequate inventory to sell.

The ongoing impact of COVID-19 depends on the duration and severity of the pandemic, which are difficult to assess or predict. While we have experienced growth in our sales volume during the COVID-19 pandemic, we cannot be certain whether we will maintain the current level of demand for our hearing aids. As a result, the impact of these or any future factors could be substantially different than what we have experienced to date. Please see the section titled “Risk Factors” for further discussion of the possible impact of the COVID-19 pandemic on our business.

Key business metrics

To analyze our business performance, determine financial forecasts and help develop long-term strategic plans, we review the following key business metrics, each of which is an important measure that represents the growth of our business:

15

The following table details the number of gross systems shipped and return accrual rates for the periods presented below:

We believe these key business metrics provide useful information to help investors understand and evaluate our business performance. Gross systems shipped is a key measure of sales volume, which drives potential revenue, while return accrual rates are an indicator of potential reductions to revenue and an indicator of change in customer mix.

Components of our results of operations

Revenue, net

We generate revenue from the sale of Eargo hearing aid systems, accessories and extended warranties, with the majority of our revenue coming from sales of our Eargo hearing aid systems. We currently offer three versions of our hearing aid systems, the Eargo Max, the Eargo Neo and the Eargo Neo HiFi, at three different price points, and we periodically offer discounts and promotions. For product sales, control is transferred upon shipment to the customer. We report revenue net of expected returns, which is an estimate informed in part by historical return rates. Prior to January 2020, we also offered extended product warranties to our customers which covered the product for an additional year, commencing on the day after the initial one-year warranty expired. For extended warranty sales, control is transferred over time based on time elapsed throughout the extended warranty period.

Cost of revenue and gross margin

Cost of revenue consists of expenses associated with the cost of finished goods, freight, personnel costs, consumables, product warranty costs, transaction fees, reserves for excess and obsolete inventory, depreciation and amortization, and related overhead. We expect cost of revenue to increase in absolute terms as our revenue grows.

Our gross margin has been and will continue to be affected by a variety of factors, including sales volumes, product mix, pricing strategies, return accrual rates, costs of finished goods, product warranty claim rates and refurbishment strategies. We expect our gross margin percentage to increase over the long term to the extent we are successful in decreasing our rate of returns and implementing refurbishment programs after new product launches. Gross margin will likely fluctuate from quarter to quarter as we continue to introduce new products and adopt new technologies.

Research and development expenses

Research and development (“R&D”) expenses, consist primarily of engineering and product development costs to develop and support our products, regulatory expenses, non-recurring engineering and other costs associated with products and technologies that are in development, as well as related overhead costs. These expenses include personnel-related costs including salaries and stock-based compensation, supplies, consulting fees, prototyping, testing, materials, travel expenses, depreciation and allocated facility overhead costs. Additionally, R&D expenses include internal and external costs associated with our regulatory compliance and quality assurance functions, and related overhead costs. We expect R&D expenses, net of capitalized internal use software development costs, to increase in absolute dollars as we continue to develop new products and enhance existing products and technologies.

Sales and marketing expenses

Our sales and marketing expenses are the largest component of our operating expenses and consist primarily of personnel-related costs including salaries and stock-based compensation, direct marketing, advertising and promotional expenses, consulting fees, public relations costs and allocated facility overhead costs. Sales and marketing personnel include our inside sales consultants, licensed hearing professionals, marketing professionals and related support personnel. We expect our sales and marketing expenses to increase

16

in absolute dollars, but decrease over time as a percentage of revenue, as we hire additional sales and marketing personnel, expand our sales support infrastructure and invest in our brand and product awareness to further penetrate the U.S. market and potentially expand into international markets.

General and administrative expenses

Our general and administrative expenses consist primarily of compensation for executive, finance, legal, information technology and administrative personnel, including stock-based compensation. Other significant expenses include professional fees for legal and accounting services, consulting fees, recruiting fees, information technology costs, corporate insurance, bad debt expense, general corporate expenses and allocated facility overhead costs.

We expect to continue to incur additional general and administrative expenses as a result of operating as a public company, including expenses related to compliance with the rules and regulations of the SEC, and those of the Nasdaq Stock Market, additional insurance costs, investor relations activities and other administrative and professional services. As a result, we expect general and administrative expenses to increase in absolute dollars in future periods.

Interest income

Interest income consists of interest earned on cash and cash equivalents.

Interest expense

Interest expense consists of interest related to borrowings under our debt obligations and our convertible promissory notes prior to their redemption in July 2020.

Other income (expense), net

Other income (expense), net consists primarily of adjustments to the fair value of our convertible preferred stock warrant liabilities prior to their reclassification to additional paid in capital upon the closing of our IPO in October 2020.

Income tax provision

We use the asset and liability method to account for income taxes. Under this method, deferred tax assets and liabilities are determined based on differences between the financial statement carrying amounts of existing assets and liabilities and their tax bases. Deferred tax assets and liabilities are measured using enacted tax rates applied to taxable income in the years in which those temporary differences are expected to be recovered or settled. A valuation allowance is established when necessary to reduce deferred tax assets to the amount expected to be realized. Due to our historical operating performance and our recorded cumulative net losses in prior fiscal periods, our net deferred tax assets have been fully offset by a valuation allowance.

Financial statement effects of uncertain tax positions are recognized when it is more-likely-than-not, based on the technical merits of the position, that it will be sustained upon examination. Interest and penalties related to unrecognized tax benefits are included within the provision for income tax.

17

Results of operations

Comparison of the three months ended March 31, 2021 and 2020

* Not meaningful

Revenue, net

Revenue increased by $9.4 million, or 74.0%, from $12.7 million during the three months ended March 31, 2020 to $22.0 million during the three months ended March 31, 2021, primarily due to increasing volumes of Eargo Neo HiFi hearing aid systems shipped. The increase in revenue was also attributable to a decrease in sales returns as a percentage of systems shipped, which was partially due to continued growth in sales to customers with health insurance coverage as such customers generally have lower return rates. Gross systems shipped during the three months ended March 31, 2021 were 11,704, a 66.5% increase compared to the 7,030 gross systems shipped during the comparable period ended March 31, 2020. The increase in volume was largely driven by a continued expansion in national marketing efforts, growth in customers with health insurance coverage for hearing aids and increasing customer adoption of our telecare model due to the COVID-19 pandemic.

Cost of revenue, gross profit, and gross margin

Cost of revenue increased by $1.6 million, or 35.2%, from $4.7 million during the three months ended March 31, 2020 to $6.3 million during the three months ended March 31, 2021. The change was primarily due to an increase in the volume of Eargo hearing aid systems shipped during the period.

18

Gross margin increased to 71.4% during the three months ended March 31, 2021, compared to 63.2% for the comparable period in 2020. The change in gross margin percentage was primarily due to a decrease in sales returns as a percentage of systems shipped and a net decrease in cost of goods per product sold.

Research and development (R&D)

R&D expenses increased by $2.0 million, or 70.1%, from $2.8 million during the three months ended March 31, 2020 to $4.8 million during the three months ended March 31, 2021. The change was primarily due to a net increase of $1.2 million in personnel and personnel-related costs, which includes an increase in stock-based compensation of $0.9 million, and a net increase of $0.6 million in third-party costs related to current and future product development initiatives.

Sales and marketing

Sales and marketing expenses increased by $6.0 million, or 55.2%, from $10.9 million during the three months ended March 31, 2020 to $16.9 million during the three months ended March 31, 2021. The change was primarily due to increases in personnel and personnel-related costs of $3.3 million and increases in direct marketing, advertising and promotional expenses of $2.7 million. The change in personnel and personnel-related costs was primarily due to increased commissions from increased sales and a net increase in salary-related costs, including an increase of $1.7 million in stock-based compensation.

General and administrative

General and administrative expenses increased by $1.4 million, or 23.2%, from $6.1 million during the three months ended March 31, 2020 to $7.5 million during the three months ended March 31, 2021. This change was primarily due to an increase in general corporate, personnel and personnel-related costs of $3.4 million, which was partially offset by a decrease in terminated IPO costs of $1.6 million. The change in personnel and personnel-related costs includes an increase of $1.8 million in stock-based compensation.

Terminated IPO costs consist of deferred offering costs expensed upon termination of our previously planned IPO in March 2020. The offering was terminated primarily because of the uncertainty in the public markets during the onset of the COVID-19 pandemic.

Other income (expense), net

Other income (expense), net during the three months ended March 31, 2021 consisted primarily of adjustments to the fair value of our convertible preferred stock warrant liabilities prior to their reclassification to additional paid in capital upon the closing of our IPO in October 2020. There was no similar expense in the comparable period.

19

Liquidity and capital resources

Sources of liquidity

Since our inception, we have incurred net losses and negative cash flows from operations. We have funded our operations primarily from the net proceeds received from the sale of our equity securities, indebtedness and revenue from the sale of our products.

In connection with our IPO, we sold an aggregate of 9,029,629 shares of our common stock at a price of $18.00 per share, resulting in net proceeds of $148.5 million after deducting underwriting discounts, commissions and offering expenses.

As of March 31, 2021, we had $15.0 million in principal outstanding under the 2018 Loan, which matures in September 2024 with interest-only payments until July 2022. Interest on the 2018 Loan accrues at a per annum rate equal to the Wall Street Journal prime rate plus 1.0%, or 4.25% as of March 31, 2021.

As of March 31, 2021, we had cash and cash equivalents of $201.6 million, which are available to fund operations, and an accumulated deficit of $212.7 million. We believe that our existing cash, cash equivalents and short-term investments, and cash generated from sales of our products, will be sufficient to meet our anticipated needs for at least the next 12 months from the date of this filing.

Cash flows

The following table summarizes our cash flows for the periods indicated:

Operating activities

During the three months ended March 31, 2021, cash used in operating activities was $9.3 million, attributable to a net loss of $13.6 million and a net change in our net operating assets and liabilities of $2.0 million, partially offset by non-cash charges of $6.3 million. Non-cash charges primarily consisted of $5.1 million in stock-based compensation and $0.7 million in depreciation and amortization expense. The change in our net operating assets and liabilities was primarily due to a $3.0 million decrease in accrued expense and a $1.6 million increase in account receivable, net. These changes were partially offset by a $1.5 million increase in other current liabilities, $0.7 million increase in account payable and $0.6 million decrease in prepaid expenses and other current assets.

During the three months ended March 31, 2020, cash used in operating activities was $9.5 million, attributable to a net loss of $11.7 million, partially offset by non-cash charges of $1.5 million and a net change in our net operating assets and liabilities of $0.7 million. Non-cash charges primarily consisted of $0.6 million in depreciation and amortization expense and $0.5 million in stock-based compensation. The change in our net operating assets and liabilities was primarily due to a $1.1 million increase in account payable and $1.1 million decrease in other assets. These changes were partially offset by a $1.4 million decrease in accrued expense.

Investing activities

During the three months ended March 31, 2021, cash used in investing activities was $1.4 million, which consisted of $1.1 million in capitalized costs related to the development of internal use software and $0.3 million related to the purchase of property and equipment.

During the three months ended March 31, 2020, cash used in investing activities was $1.2 million, which consisted of $1.0 million in capitalized costs related to the development of internal use software and $0.2 million related to the purchase of property and equipment.

Financing activities

During the three months ended March 31, 2021, cash provided by financing activities was $0.1 million from the exercise of stock options.

During the three months ended March 31, 2020, cash provided by financing activities was $7.7 million. This was attributable to $8.8 million in proceeds from the issuance of convertible notes, partially offset by $1.2 million in debt repayments.

20

Contractual obligations and commitments

The following table summarizes our contractual obligations and commitments as of December 31, 2020:

Off-balance sheet arrangements

During the period presented, we did not have any off-balance sheet arrangements as defined in the rules and regulations of the SEC.

Critical accounting policies and estimates

Management’s discussion and analysis of our financial condition and results of operations is based on our unaudited condensed consolidated financial statements, which have been prepared in accordance with U.S. generally accepted accounting principles. The preparation of these unaudited condensed consolidated financial statements requires us to make estimates and assumptions regarding the reported amounts of assets, liabilities, revenue, expenses and related disclosures. Our estimates are based on our historical experience and on various other factors that we believe are reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions and any such differences may be material.

There have been no significant changes in our critical accounting policies and estimates as compared to the critical accounting policies and estimates disclosed in the section titled “Management’s Discussion and Analysis of Financial Condition and Operations” included in our Annual Report on Form 10-K for the fiscal year ended December 31, 2020.

Recent accounting pronouncements

See Note 2 to our unaudited condensed consolidated financial statements for more information about recent accounting pronouncements, the timing of their adoption, and our assessment.

JOBS Act Accounting Election

We are an “emerging growth company,” as defined in the JOBS Act. Under the JOBS Act, emerging growth companies can delay adopting new or revised accounting standards issued subsequent to the enactment of the JOBS Act until such time as those standards apply to private companies.

We have elected to use this extended transition period to enable us to comply with new or revised accounting standards that have different effective dates for public and private companies until the earlier of the date we (i) are no longer an emerging growth company or (ii) affirmatively and irrevocably opt out of the extended transition period provided in the JOBS Act. As a result, our consolidated financial statements and our interim condensed consolidated financial statements may not be comparable to companies that comply with new or revised accounting pronouncements.

Item 3. Quantitative and Qualitative Disclosures About Market Risk.

Interest rate risk

Our cash and cash equivalents as of March 31, 2021 and December 31, 2020 consisted of $201.6 million and $212.2 million, respectively, in bank deposits and money market funds. Such interest-earning instruments carry a degree of interest rate risk. The goals of our investment policy are liquidity and capital preservation; we do not enter into investments for trading or speculative purposes and have not used any derivative financial instruments to manage our interest rate exposure. We believe that we do not have

21

any material exposure to changes in the fair value of these assets as a result of changes in interest rates due to the short-term nature of our cash and cash equivalents.

As of March 31, 2021 and December 31, 2020, we had $15.0 million in variable rate debt outstanding. The 2018 Loan matures in September 2024 and has interest-only payments until July 2022. The 2018 Loan accrues interest at a floating per annum rate equal to the Wall Street Journal prime rate plus 1.0% with a floor of 0.0% (4.25% as of March 31, 2021).

Item 4. Controls and Procedures.

Evaluation of Disclosure Controls and Procedures

Our management, with the participation and supervision of our Chief Executive Officer and our Chief Financial Officer, have evaluated our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended, or the “Exchange Act”) as of the end of the period covered by this Quarterly Report on Form 10-Q. The term “disclosure controls and procedures,” as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act, means controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the Company’s management, including its principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure. Management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable assurance of achieving their objectives and management necessarily applies its judgment in evaluating the cost benefit relationship of possible controls and procedures. Based on that evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that, solely as a result of the material weaknesses in our internal control over financial reporting described below, our disclosure controls and procedures were not effective as of March 31, 2021 to provide reasonable assurance that information we are required to disclose in reports that we file or submit under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in SEC rules and forms, and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure.

Remediations efforts on previously reported material weaknesses

In connection with the preparation of our financial statements in connection with our IPO, we identified a material weakness in our internal control over financial reporting. A material weakness is a deficiency, or combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of our financial statements will not be prevented or detected on a timely basis. The material weakness related to a lack of qualified supervisory accounting resources, including those necessary to account for and disclose certain complex transactions and for which we lacked the technical expertise to identify, analyze and appropriately record those transactions.

We have implemented and are in the process of implementing additional measures designed to improve our internal control over financial reporting to remediate this material weakness, including the hiring of qualified supervisory resources and technical accounting personnel, the engagement of qualified technical accounting consulting resources and the continued hiring of additional qualified finance department employees.

We cannot assure you that the measures we have taken to date, and are continuing to implement, will be sufficient to remediate the material weakness we have identified or avoid potential future material weaknesses.  While we believe that our efforts have improved our internal control over financial reporting, remediation of the material weaknesses will require further validation and testing of the design and operating effectiveness of internal controls over a sustained period of financial reporting cycles, and we cannot assure you that we have identified all, or that we will not in the future have additional, material weaknesses.

Changes in Internal Control over Financial Reporting

Other than the changes intended to remediate the material weaknesses noted above, there were no changes in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during the quarter ended March 31, 2021 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

22

PART II—OTHER INFORMATION

Item 1. Legal Proceedings.

We are not currently a party to any material legal proceedings. We may, however, in the ordinary course of business face various claims brought by third parties, and we may, from time to time, make claims or take legal actions to assert our rights, including intellectual property rights as well as claims relating to employment matters and the safety or efficacy of our products. Any of these claims could subject us to costly litigation, and, while we generally believe that we have adequate insurance to cover many different types of liabilities, our insurance carriers may deny coverage, may be inadequately capitalized to pay on valid claims, or our policy limits may be inadequate to fully satisfy any damage awards or settlements. If this were to happen, the payment of any such awards could have a material adverse effect on our business, financial condition and results of operations. Additionally, any such claims, whether or not successful, could damage our reputation and business.

Item 1A. Risk Factors.

Risk factor summary

Below is a summary of the principal factors that make an investment in our common stock speculative or risky. This summary does not address all of the risks that we face. Additional discussion of the risks summarized in this risk factor summary, and other risks that we face, can be found below under the heading “Risk Factors” and should be carefully considered, together with other information in this Quarterly Report on Form 10-Q and our other filings with the SEC, before making investment decisions regarding our common stock.

23

Risk Factors

Our operating and financial results are subject to various risks and uncertainties. You should carefully consider the risks described below, as well as all of the other information contained in this Quarterly Report on Form 10-Q, including our financial statements and related notes, before investing in our common stock. While we believe that the risks and uncertainties described below are the material risks currently facing us, additional risks that we do not yet know of or that we currently think are immaterial may also arise and materially affect our business.

Risks relating to our industry and business

We have a limited operating history and have grown significantly in a short period of time. If we fail to manage our growth effectively, our business could be materially and adversely affected.

We were organized in 2010 and began selling hearing aids in 2015. Accordingly, we have a limited operating history, which makes an evaluation of our future prospects difficult. Our operating results have fluctuated in the past, and we expect our future quarterly and annual operating results to fluctuate as we focus on increasing the demand for our products. We may need to make business decisions that could adversely affect our operating results, such as modifications to our pricing strategy, business structure or operations.

In addition, we have experienced recent rapid growth and anticipate further growth, although the COVID-19 pandemic may substantially impact our future growth. For example, our revenue increased from $32.8 million for the year ended December 31, 2019 to $69.2 million for the year ended December 31, 2020 and from $12.7 million for the three months ended March 31, 2020 to $22.0 million for the three months ended March 31, 2021.

This growth has placed significant demands on our management, financial, operational, technological and other resources, and we expect that our growth will continue to place significant demands on our management and other resources and will require us to continue developing and improving our operational, financial and other internal controls. In particular, continued growth increases the challenges involved in a number of areas, including recruiting and retaining sufficient skilled personnel, providing adequate training and supervision to maintain our high-quality standards and preserving our culture and values. We may not be able to address these challenges in a cost-effective manner, or at all. If we do not effectively manage our growth, we may not be able to execute on our business plan, respond to competitive pressures, take advantage of market opportunities, satisfy customer requirements or maintain high-quality product offerings, which could have a material adverse effect on our business, financial condition and results of operations.

We have a history of net losses, and we may not achieve or maintain profitability in the future.

We have incurred net losses since inception. For the years ended December 31, 2020 and 2019, we incurred net losses of $39.9 million and $44.5 million, respectively, and for the three months ended March 31, 2021 and 2020, we incurred net losses of $13.6 million and $11.7 million, respectively. As a result of our ongoing losses, as of March 31, 2021, we had an accumulated deficit of $212.7 million. Since inception, we have spent significant funds on organizational and start-up activities, to recruit key managers and employees, to develop our hearing aids, to develop our manufacturing know-how and customer support resources and for research and development. The net losses we incur may fluctuate significantly from quarter to quarter and may increase as a result of the COVID-19 pandemic.

Our long-term success is dependent upon our ability to successfully develop, commercialize and market our products, earn revenue, obtain additional capital when needed and, ultimately, to achieve profitable operations. We will need to generate significant additional revenue to achieve profitability. It is possible that we will not achieve profitability or that, even if we do achieve profitability, we may not maintain or increase profitability in the future. Our failure to achieve or maintain profitability could negatively impact the value of our common stock.

A significant portion of our revenue is dependent upon reimbursement from third-party payors. Any material changes to third-party coverage or reimbursement could significantly impact our business and our ability to grow and sell our products.

A significant portion of our revenue depends on payments from third-party payors that we submit claims to on behalf of our customers. If there are decreases in hearing aid benefits offered under these plans, our ability to seek third-party reimbursement could be reduced. Decreases in hearing benefits could lead to changes in the amount these plans will pay for hearing aids, the types of providers these plans allow their members to see for hearing aids, or how often the plans will pay for hearing aids. If we fail to maintain access to existing levels of coverage and reimbursement for our products, our business and operating results could be adversely affected.

24

We currently submit claims on behalf of customers to a concentrated number of third-party payors under certain benefit plans. Additionally, third-party payors periodically conduct pre- and post-payment reviews, including audits of previously submitted claims, and we are currently experiencing and may experience such reviews and audits of claims in the future. For example, we are currently subject to a routine audit with our largest third-party payor, who accounted for approximately 57% of the Company’s gross accounts receivable as of March 31, 2021. Such reviews and audits of our claims have resulted and could in the future result in significant delays in payment, and could result in material recoupments of previous claims paid or denials of pending or future claims, which could impact our ability to recognize revenue, reduce our net sales and profitability, or result in the loss of our ability to submit claims to certain third-party payors for payment.

We expect to continue to focus substantial resources on both securing existing third-party reimbursement and increasing coverage and reimbursement for our current products and any future products we may develop. We may never achieve sufficient additional third-party reimbursement to meaningfully expand our access to insurance coverage. We cannot predict whether, under what circumstances, or at what payment levels third-party payors will cover and reimburse our products. If we fail to establish and maintain broad adoption of our products or fail to further penetrate the insurance and managed care markets for our products, our ability to generate revenue could be harmed and our prospects and our business could suffer. To the extent we sell our products internationally, market acceptance may depend, in part, upon the availability of coverage and reimbursement within prevailing healthcare payment systems. Reimbursement and healthcare payment systems in international markets vary significantly by country and include both government-sponsored healthcare and private insurance. We may not obtain international coverage and reimbursement approvals in a timely manner, if at all. Our failure to receive such approvals would negatively impact market acceptance of our products in the international markets in which those approvals are sought.

We depend on sales of our hearing aids for our revenue. Demand for our hearing aids may not increase as rapidly as we anticipate due to a variety of factors, including a weakness in general economic conditions or competitive pressures.

We expect that revenue from sales of our hearing aids will continue to account for our revenue for the foreseeable future. Continued and widespread market acceptance of hearing aids by consumers is critical to our future success. Consumer spending habits are affected by, among other things, prevailing economic conditions, levels of employment, salaries and wage rates, interest rates, inflation rates, consumer confidence and consumer perception of economic conditions, which have been adversely affected by the COVID-19 pandemic and may continue to be materially adversely affected by the COVID-19 pandemic. Hearing aids are often paid for directly by the consumer and, as a result, demand can vary significantly depending on economic growth. A general slowdown in the U.S. economy and international economies into which we may expand or an uncertain economic outlook could adversely affect consumer spending habits, which may result in, among other things, a reduction in consumer spending on elective or higher value products, or a reduction in demand for hearing aids generally, each of which would have an adverse effect on our sales and operating results. Weakness in the global economy results in a challenging environment for selling hearing loss technologies. In such circumstances, consumers may opt to purchase less expensive hearing loss technologies. If there is a reduction in consumer demand for hearing aids generally, if consumers choose to use a competitive product rather than our hearing aids or if the average selling price of our hearing aids declines as a result of economic conditions, including employment levels and inflation, competitive pressures or any other reason, these factors could have a material adverse effect on our business, financial condition and results of operations. If we are not successful in adapting our production and cost structure to the market environment, we may experience further adverse effects that may be material to our business, financial condition and results of operations.

If we cannot innovate at the pace of our hearing aid manufacturing competitors, we may not be able to develop or exploit new technologies in time to remain competitive.

The hearing aid industry has in the past experienced rapid shifts to new key technologies, including for example the switch from analog to digital hearing aids in the 1990s, that disrupted existing market patterns and led to a large-scale market realignment among customers and hearing aid manufacturers. For us to remain competitive, it is essential to develop and bring to market new technologies or to find new applications for existing technologies at an increasing speed. If we are unable to meet customer demands for new technology, or if the technologies we introduce are viewed less favorably than our competitors’ products, our results of operations and future prospects may be negatively affected. To meet our customers’ needs in these areas, we must continuously design new products, update existing products and invest in and develop new technologies. Our operating results depend to a significant extent on our ability to anticipate and adapt to technological changes in the hearing aid market, maintain innovation, maintain a strong product pipeline and reduce the costs of producing high-quality new and existing hearing aids. Any inability to do so could have a material adverse effect on our business, financial condition and results of operations.

We are deploying a new business model in an effort to disrupt a relatively mature industry. In order to successfully challenge incumbent business models and become profitable, we will need to continue to refine our product and strategy.

Our direct-to-consumer business model is new to the hearing aid industry. Our products are currently primarily available direct-to-consumer and are therefore generally not sold by channels which consumers would traditionally look to for the treatment of their hearing loss. Because audiologists and hearing clinics do not currently offer our products, they are unlikely to recommend our

25

products as a solution to their patients. If we are unable to reach this population through our online or direct marketing, the estimated market size for our products may be lower than we anticipate.

Delivery of hearing aids via a direct-to-consumer model represents a change from the traditional channel, which requires in-person visits to one or more hearing care professionals, and consumers may be reluctant to accept this model or may not find it preferable to the traditional channel. In addition, consumers may not respond to our direct marketing campaigns, or we may be unsuccessful in reaching our target audience, particularly if we expand our sales efforts in foreign jurisdictions where our advertising and distribution model may be more heavily regulated. If consumers prove unwilling to adopt our model as rapidly or in the numbers that we anticipate, our business, financial condition and results of operations could be materially harmed.

We operate in a highly competitive industry, and competitive pressures could have a material adverse effect on our business.

The worldwide market for hearing aids is competitive in terms of pricing, product quality, product innovation and time-to-market. We face strong competitors, which have greater resources and stronger financial profiles that may enable them to better exploit changes in our industry on a cost-competitive basis and to be more effective and faster in capturing available market opportunities, which in turn may negatively impact our market share. There are five major traditional manufacturer competitors in the industry—GN Store Nord, Sonova, Starkey, William Demant and WS Audiology—who together control a significant majority of the hearing aid market.

In addition to these manufacturer competitors, Costco sells multiple brands of hearing aids, including those of the traditional manufacturers and Costco’s own white-label Kirkland Signature brand of hearing aid, at prices ranging from approximately $1,400 to $2,899 per pair. We estimate that during 2019, Costco dispensed approximately 14% of the hearing aids distributed in the United States, which percentage is expected to increase going forward. The United States Department of Veterans Affairs (the “VA”) is also a significant provider of hearing aids and provides hearing aids at no charge to its patients. We estimate that, in 2019, the VA dispensed approximately 19% of the hearing aids distributed in the United States. Our products are not distributed by Costco, or on contract or currently eligible to be distributed by the VA.

We also face competition from companies that introduce new technologies, including consumer electronics companies that sell direct to consumers. For example, in May 2018, the United States Food and Drug Administration (the “FDA”) granted marketing clearance to Bose Corporation for a “self-fitting air-conduction hearing aid.” The Bose self-fitting hearing aid was cleared under the FDA’s de novo premarket review pathway with the intended use to amplify sound for individuals 18 years of age or older with perceived mild to moderate hearing impairment, with no pre-programming or hearing test necessary. We view our consumer-first model as a competitive advantage, and competitors, including Bose or other consumer electronics companies, that sell hearing aids directly to consumers may erode that advantage. Please see the risk factor below titled, “Changes in the regulatory landscape for hearing aid devices could render our direct-to-consumer business model contrary to applicable regulatory requirements, and we may be required to seek additional clearance or approval for our products.”

We also face competition from other direct-to-consumer hearing aid providers. Similar to our business model, these hearing aid companies allow consumers to purchase hearing aids remotely, with no need to visit a clinic and they provide remote clinical support. Given the similarities in our business model to these providers, if potential consumers opt to buy their hearing aids from these direct-to-consumer competitors, our business could be adversely affected.

We may be unable to compete with these or other competitors, and one or more of such competitors may render our technology obsolete or economically unattractive. To the extent we expand internationally, we will face additional competition in geographies outside the United States. If we are unable to compete effectively with existing products or respond effectively to any new products developed by competitors, our business could be materially harmed. Increased competition may result in price reductions, reduced gross margins and loss of market share. There can be no assurance that we will be able to compete successfully against our current or future competitors or that competitive pressures will not have a material adverse effect on our business, financial condition and results of operations.

If we are unable to reduce our return rates or if our return rates increase, our net revenue may decrease or grow more slowly than we anticipate, and our business, financial condition and results of operations could be adversely affected.

Eargo’s customer return accrual rates were approximately 23.2% in the first quarter of 2021. Our return policy allows our customers to return hearing aids for any reason within the first 45 days of delivery for a full refund, subject to a handling fee in certain states. We report revenue net of expected returns, which is an estimate informed in part by historical return rates. As such, our return rate impacts our reported net revenue and profitability. If actual sales returns differ significantly from our estimates, an adjustment to revenue in the current or subsequent period is recorded. Furthermore, if we are unable to reduce our return rates or if they increase, our net revenue may decrease or grow more slowly than we anticipate, and our business, financial condition and results of operations could be adversely affected.

26

Changes in the regulatory landscape for hearing aid devices could render our direct-to-consumer business model contrary to applicable regulatory requirements, and we may be required to seek additional clearance or approval for our products.

Hearing aids are considered medical devices subject to regulation by the FDA. We currently market our products pursuant to the FDA regulatory framework for air-conduction hearing aids, which are classified as Class I or Class II devices exempt from premarket review procedures. In addition, while applicable FDA regulations establish certain “conditions for sale” of all hearing aids, including that prospective hearing aid users must have a medical evaluation by a licensed physician within the six months prior to hearing aid dispensation, the FDA has stated that it does not intend to enforce these medical evaluation requirements prior to the dispensing of Class I air-conduction and Class II wireless air-conduction hearing aids to individuals 18 years of age and older. Accordingly, while we are required to comply with other FDA requirements, including specific hearing aid labeling requirements and provision of a User Instructional Brochure, our products have not been reviewed by the FDA and are not dispensed by licensed physicians. If the FDA were to determine that our products do not properly satisfy the conditions for marketing Class I or Class II air-conduction hearing aid devices, we could be forced to cease distribution of our products until we obtain regulatory clearance or approval, and we could be subject to additional enforcement action by the FDA. In addition, many states have laws regarding the provision of hearing aid devices, and if we are found to be in violation of the laws of any state in which our devices are sold, we could be subject to further sanctions at the state level.

The regulatory landscape for hearing aid devices has been subject to recent changes that may alter or increase our requirements for regulatory compliance. The FDA Reauthorization Act of 2017 (“FDARA”) created a new category of over-the-counter (“OTC”) hearing aids that are intended to be available through in-person transactions, by mail or online without the involvement of a licensed practitioner. Under the statute, the FDA is required to issue regulations to implement the new framework. The language in FDARA is not self-implementing, which means that the conditions for sale for the OTC hearing aid category do not exist until the effective date of a published final regulation. Despite the deadline in FDARA for the FDA to issue proposed regulations by August 18, 2020, the FDA has not yet issued a notice of proposed rulemaking or indicated how it will implement the new OTC hearing aid pathway. We market the Eargo system devices as Class I or Class II exempt air-conduction hearing aids under existing regulations and are not dependent on the FDA’s issuance of OTC hearing aid regulations for the marketing of our products. However, our devices may become subject to additional requirements in connection with such regulations in the future.

In addition, in May 2018, the FDA granted a de novo classification request from Bose for a direct-to-consumer “self-fitting air-conduction hearing aid,” and effective October 28, 2019, the FDA published 21 CFR 874.3325, establishing the product classification for the self-fitting air conduction hearing aid as a Class II hearing aid with special controls subject to 510(k) premarket review. We do not consider our devices to be “self-fitting” hearing aids similar to the recently cleared Bose device, but the FDA could disagree. Further, while we expect our products to continue to be regulated as Class I or Class II exempt devices, our products could in the future be deemed to fall under the definition of a “self-fitting air-conduction hearing aid” or an OTC hearing aid, in which case we could be required to seek 510(k) clearance for our products or otherwise comply with additional regulatory requirements associated with these new pathways. In such case, the FDA may require us to remove our devices from the market while we seek FDA clearance. In addition, even if our current products remain Class I or Class II exempt devices, it is possible that any future products we may develop could fail to meet the requisite criteria for similar regulation and could be subject to more stringent requirements and premarket review, increasing our costs for regulatory compliance.

We currently rely on a single manufacturer for the assembly of our hearing aids. If we encounter manufacturing problems or delays, we may be unable to promptly transition to an alternative manufacturer and our ability to generate revenue will be limited.

We have no manufacturing capabilities of our own. We currently rely on a single manufacturer located in Thailand, Hana Microelectronics, for the manufacture of all of our products currently available for sale. We have entered in a manufacturing services agreement with a second manufacturer located in Taiwan, Pegatron Corporation, for the manufacture of our next generation hearing aid. For us to be successful, our contract manufacturers must be able to provide us with products in substantial quantities, in compliance with regulatory requirements, in accordance with agreed upon specifications, at acceptable costs and on a timely basis. While our existing manufacturer has generally met our demand requirements on a timely basis in the past, its ability and willingness to continue to do so going forward, and the ability and willingness of our new manufacturer to meet our demand requirements, may be limited for several reasons, including our relative importance as a customer of the manufacturer or its ability to provide assembly services to manufacture our products, which may be affected by the COVID-19 pandemic. An interruption in our commercial operations could occur if we encounter delays or difficulties in securing these manufactured products if we cannot obtain an acceptable substitute.

Any transition to a new contract manufacturer, or any transition of products between existing manufacturers, could be time-consuming and expensive, may result in interruptions in our operations and product delivery, could affect the performance specifications of our products or could require that we modify the design of our products. If we are required to change either of our contract manufacturers, we will be required to verify that the new manufacturer maintains facilities, procedures and operations that comply with our quality and applicable regulatory requirements, which could further impede our ability to manufacture our products in a timely manner. We cannot assure you that we will be able to identify and engage alternative contract manufacturers on similar terms or without delay. Furthermore, our contract manufacturers could require us to move to a different production facility. The occurrence of any of these

27

events could harm our ability to meet the demand for our products in a timely and cost-effective manner, which could have a material adverse effect on our business, financial condition and results of operations.

The manufacture of our products is complex and requires the integration of a number of components from several sources of supply. Our contract manufacturers must manufacture and assemble these complex products in commercial quantities in compliance with regulatory requirements and at an acceptable cost. Our hearing aids require significant expertise to manufacture, and our contract manufacturers may encounter difficulties in scaling up production of the hearing aids, including problems with quality control and assurance, component supply shortages, including any semiconductor components, increased costs, shortages of qualified personnel, the long lead time required to develop additional facilities for purposes of testing our products and/or difficulties associated with compliance with local, state, federal and foreign regulatory requirements. There can be no assurance that manufacturing or quality control problems will not arise in connection with the scale-up of the manufacture of our products. If we are unable to obtain a sufficient supply of product, maintain control over product quality and cost or otherwise adapt to anticipated growth, or if we underestimate growth, we may not have the capability to satisfy market demand, and our business and reputation in the marketplace will suffer. Conversely, if demand for our products decreases, we may have excess inventory, which could result in inventory write-offs that would have a material adverse effect on our business, financial condition and results of operations. We may also encounter defects in materials and/or workmanship, which could lead to a failure to adhere to regulatory requirements. Any defects could delay operations at our contract manufacturers’ facilities, lead to regulatory fines or halt or discontinue manufacturing indefinitely. Any of these outcomes could have a material adverse effect on our business, financial condition and results of operations.

We rely on the timely supply of components and parts and could suffer if suppliers fail to meet their delivery obligations, raise prices or cease to supply us with components or parts.

We rely on a limited number of critical suppliers for many of the components that are used in the manufacture of our products, including for batteries, integrated circuits, microphones and receivers. This reliance on third parties adds additional risks to the manufacturing process that are beyond our control. For example, the occurrence of epidemics or pandemics, such as the COVID-19 pandemic, may cause one or more of our suppliers to close or reduce the scope of their operations either temporarily or permanently. In addition, many of these suppliers also provide components and products to our competitors. The industry’s reliance on a limited number of key components and product suppliers subjects us to the risk that in the event of an increase in demand, our suppliers may fail to provide supplies to us in a timely manner while they continue to supply our competitors, many of which have greater purchasing power than us, or seek to supply components to us at a higher cost. The failure of our suppliers to deliver components or products in a timely fashion could have disruptive effects on our ability to produce our products in a timely manner, or we may be required to find new suppliers at an increased cost. Furthermore, we generally do not enter into long-term commitment contracts with our suppliers, but rather enter into framework agreements as a basis for individual orders. The terms of such framework agreements are typically up to two years and in most cases do not contain any firm purchase commitments. We can make no assurance that we will be able to renew such supply agreements. If we are unable to renew supply agreements, our access to key components could be reduced, which could harm our business. Additionally, our reputation and the quality of our products are in part dependent on the quality of the components that we source from third-party suppliers. If we are unable to control the quality of the components supplied to us or to address known quality problems in a timely manner, our reputation in the market may be damaged and sales of our products may suffer. As a result, we may experience a material adverse effect on our business, financial condition and results of operations.

Certain components needed to manufacture our hearing aids are only available from a limited number of suppliers.

Several of our suppliers provide products for our hearing aids and accessories for which they own the design and/or intellectual property rights. This includes integrated circuits, transducers, batteries and various electrical components. Although there may be several potential suppliers for our components, as our components are highly customized, there is a risk that these components may not be readily substituted by similar products of other suppliers or that any substitution may take a lengthy period of time to implement. Even if we do identify new suppliers, we may experience increased costs and product shortages as we transition to alternative suppliers. If any of these limited suppliers cease to supply us with their products, or any of the foregoing events occurs, we could experience a material adverse effect on our business, financial condition and results of operations.

If we are unable to successfully develop and effectively manage the introduction of new products, our business may be adversely affected.

We must successfully manage introductions of new or advanced hearing aid products. Introductions of new or advanced hearing aid products could also adversely impact the sales of our existing products to consumers. For instance, the introduction or announcement of new or advanced hearing aid products may shorten the life cycle of our existing devices or reduce demand, thereby reducing any benefits of successful hearing aid introductions and potentially lead to challenges in managing write-downs or write-offs of inventory of existing products. In addition, new hearing aid products may have higher manufacturing costs than legacy products, which could negatively impact our gross margins and operating results. Accordingly, if we fail to effectively manage introductions of new or advanced products, our business may be adversely affected.

28

We experience challenges managing the inventory of existing hearing aids, which can lead to excess inventory and discounting of our existing devices. Inventory levels in excess of consumer demand may result in inventory write-downs or write-offs and the sale of inventory at discounted prices, which has affected our gross margin and could impair the strength of our brand. Reserves and write-downs for rebates, promotions and excess inventory are recorded based on our forecast of future demand. Actual future demand could be less than our forecast, which may result in additional reserves and write-downs in the future, or actual demand could be stronger than our forecast, which may result in a reduction to previously recorded reserves and write-downs in the future and increase the volatility of our operating results.

If the quality of our hearing solution does not meet consumer expectations, or if our products wear out more quickly than expected, then our brand and reputation or our business could be adversely affected.

Our products may not perform as well in day-to-day use as we or our customers expect. Although we designed our Eargo hearing aids to provide high quality audio, we have collected limited data comparing our products to competitive devices. In October 2019, we conducted a series of comparative electroacoustic benchmarking tests (the “Bench Study”) to compare our Eargo Neo hearing aid with hearing aids from three major manufacturers. While each of the devices tested in the Bench Study, including our Eargo Neo hearing aid, met or exceeded the identified benchmarks for appropriate levels of sound quality and amplification to improve speech audibility, the design, methodology and results of the Bench Study have not been subject to external review and may not be reliable or replicable indicators of the general performance of our Eargo Neo hearing aid or the other manufacturers’ hearing aids that were the subject of the Bench Study. Further, the benchmarks for appropriate levels of sound quality and amplification that we identified in the Bench Study may not be appropriate proxies for hearing aid performance or reflect the real-world performance of any tested device. Future studies, including our internal studies or those of our competitors or other third parties, may not yield the results that we expect to obtain and may not demonstrate that our products are superior to, or may demonstrate that our products are inferior to, existing or future products with regard to functional or economic measures. These study results may be published in medical journals or other publications, or by our competitors and result in adverse publicity for our products. The performance of our Eargo hearing aids may not live up to customer expectations, and our brand, reputation, customer satisfaction, return rates and sales may be adversely affected as a result.

Furthermore, because of our products’ limited time in the market, we cannot be certain about the usable life of our products. Due to the design constraints applicable to our rechargeable, in-the-canal form factor, our hearing aids may offer a shorter usable life compared to our competitors’ hearing aids. Thus, even though our products may be more affordable than competitive devices, they may need to be replaced more often. Although we believe the advantages of our design justify this tradeoff, customers may expect a longer useful life, and failure to live up to this expectation could result in reduced sales, decreased customer loyalty, higher-than-expected warranty claims and adverse publicity.

Certain components of our hearing aids may also offer reduced performance or wear out over time. For example, the rechargeable technology used in our hearing aids and charging cases has a limited lifespan, and recharging performance will degrade over time. We designed our Eargo Neo and Eargo Neo HiFi hearing aids to provide up to 20 hours of continuous use between charges when new and up to 16 hours after 1,000 charging cycles, but charging capacity may decrease more quickly than expected. Moreover, certain components of our hearing aids, including Flexi Fibers and Flexi Palms that can be purchased online, will require more frequent replacement than the device itself. If the quality, longevity and durability of our products does not meet the expectations of customers, then our brand and reputation and our business, financial condition and results of operations, could be adversely affected.

Customer or third-party complaints or negative reviews or publicity about our company or our hearing aids could harm our reputation and brand.

We are heavily dependent on customers who use our hearing aids to provide good reviews and word-of-mouth recommendations to contribute to our growth. Customers who are dissatisfied with their experiences with our products or services may post negative reviews. We may also be the subject of blog, forum or other media postings that include inaccurate statements and create negative publicity. In addition, traditional hearing aid supply chain participants may express and publish negative views regarding our direct-to-consumer model and products. Any negative reviews or publicity, whether real or perceived, disseminated by word-of-mouth, by the general media, by electronic or social networking means or by other methods, could harm our reputation and brand and could severely diminish consumer confidence in our products.

We spend significant amounts on advertising and other marketing campaigns to acquire new customers, which may not be successful or cost effective.

We market our hearing aids through a mix of digital and traditional marketing channels. These include paid search, digital display advertising, email marketing, affiliate marketing, direct response television, national reach television, direct mail and select print and radio advertising. We also leverage our database of prospects and customers to further drive customer acquisition and referrals. We spend significant amounts on advertising and other marketing campaigns to acquire new customers, and we expect our marketing expenses to increase in the future as we continue to spend significant amounts to acquire new customers and increase awareness of our products. While we seek to structure our marketing campaigns in the manner that we believe is most likely to encourage consumers to

29

use our products, we may fail to identify marketing opportunities that satisfy our anticipated return on marketing spend as we scale our investments in marketing, accurately predict customer acquisition or fully understand or estimate the conditions and behaviors that drive consumer behavior. If any of our marketing campaigns prove less successful than anticipated in attracting new customers, we may not be able to recover our marketing spend, and our rate of customer acquisition may fail to meet market expectations, either of which could have a material adverse effect on our business, financial condition and results of operations. There can be no assurance that our marketing efforts will result in increased sales of our products.

In addition, we believe that building a strong brand and developing and achieving broad awareness of our brand is critical to achieving market success. If any of our brand-building activities prove less successful than anticipated in attracting new customers, we may not be able to recover our brand-building spend, and our rate of customer acquisition may fail to meet market expectations, either of which could have a material adverse effect on our business, financial condition and results of operations. There can be no assurance that our brand-building efforts will result in increased sales of our products.

We experience seasonality in our business, which may cause fluctuations in our financial results.

Historically, we have experienced and expect to continue to experience seasonality in our business, with higher sales volumes in quarters when we launch new products and in the fourth calendar quarter as a result of holiday promotional activity.

Because of these fluctuations, among other factors, it is possible that in future periods our operating results will fall below the expectations of securities analysts or investors, in which case the market price of our stock would likely decrease. These fluctuations, among other factors, also mean that our operating results in any particular period may not be relied upon as an indication of future performance.

Our products are complex to design and manufacture and could contain defects. The production and sale of defective products could adversely affect our business, financial condition and results of operations. If product liability lawsuits are brought against us, we may incur substantial liabilities and may be required to limit commercialization of our products.

We make hearing aids that include highly complex electronic components, which are sourced from external third parties, and there is an inherent risk that defects may occur in the production of any of our products. Although we rely on the supplier’s internal procedures designed to minimize risks that may arise from quality issues, there can be no assurance that we or our suppliers will be able to eliminate or mitigate occurrences of these issues and associated liabilities. Under consumer product legislation in many jurisdictions, we may be forced to recall or repurchase defective products, and more restrictive laws and regulations relating to these matters may be adopted in the future. We also face exposure to product liability claims in the event that any of our devices are alleged to have resulted in personal injury or damage to property, or otherwise to have caused harm. For example, we may be sued if any of our hearing aids allegedly causes injury or is found to be otherwise unsuitable during product testing, manufacturing, marketing or sale. Any such product liability claims may include allegations of defects in manufacturing, defects in design, a failure to warn of dangers inherent in the product, negligence, strict liability and a breach of warranty. Claims could also be asserted under state consumer protection acts. If we cannot successfully defend ourselves against product liability claims, we may incur substantial liabilities or be required to limit commercialization of our products. Even successful defense would require significant financial and management resources. Regardless of the merits or eventual outcome, liability claims may result in:

Our inability to obtain and maintain sufficient product liability insurance at an acceptable cost and scope of coverage to protect against potential product liability claims could prevent or inhibit the sale of our current or any future products we develop. Although we currently carry product liability insurance, any claim that may be brought against us could result in a court judgment or settlement in an amount that is not covered, in whole or in part, by our insurance or that is in excess of the limits of our insurance coverage. Our insurance policies also have various exclusions and deductibles, and we may be subject to a product liability claim for which we have no coverage. We will have to pay any amounts awarded by a court or negotiated in a settlement that exceed our coverage limitations or that are not covered by our insurance, and we may not have, or be able to obtain, sufficient funds to pay such amounts. Moreover,

30

in the future, we may not be able to maintain insurance coverage at a reasonable cost or in sufficient amounts to protect us against losses.

In addition, any product defects, recalls or claims that result in significant adverse publicity could have a negative effect on our reputation, result in loss of market share or failure to achieve market acceptance. For example, our first generation hearing aid, launched in 2015, had a high incidence of product returns and warranty claims. As a result, we voluntarily withdrew the product from the market. The production and sale of defective products in the future could have a material adverse effect on our business, financial condition and results of operations.

We are subject to consumer protection laws that regulate our marketing practices and prohibit unfair or deceptive acts or practices. Our actual or perceived failure to comply with such obligations could harm our business, and changes in such regulations or laws could require us to modify our products or marketing or advertising efforts.

In connection with the marketing or advertisement of our products, we could be the target of claims relating to false, misleading, deceptive or otherwise noncompliant advertising or marketing practices, including under the auspices of the Federal Trade Commission and state consumer protection statutes. If we rely on third parties to provide any marketing and advertising of our products, we could be liable for, or face reputational harm as a result of, their marketing practices if, for example, they fail to comply with applicable statutory and regulatory requirements.

If we are found to have breached any consumer protection, advertising, unfair competition or other laws or regulations, we may be subject to enforcement actions that require us to change our marketing and business practices in a manner which may negatively impact us. This could also result in litigation, fines, penalties and adverse publicity that could cause reputational harm and loss of customer trust, which could have a material adverse effect on our business, financial condition and results of operations.

There are a variety of hearing aid products and technologies, and consumer confusion about product features and technology could lead consumers to purchase competitive products instead of our products, or to conflate any adverse events or safety issues associated with third-party hearing aid products with our products, which could adversely affect our business, financial condition and results of operations.

We believe that many individuals do not have full information regarding the types of hearing aids and hearing aid features and technologies available in the market, in part due to the lack of consumer education in the traditional hearing industry sales model. Consumers may not have sufficient information about hearing aids generally or how hearing aid products and technologies compare to each other. This confusion may result in consumers purchasing hearing aids from our competitors instead of our products, even if our hearing aids would provide them with their desired product features. In addition, any adverse events or safety issues relating to competitive hearing aid products and related negative publicity, even if such events are not attributable to our products, could result in reduced purchases of hearing aids by consumers generally. Any of these occurrences could lead to reduced sales of our products and adversely affect our business, financial condition and results of operations.

Our business, financial condition, results of operations and growth may be impacted by the effects of the COVID-19 pandemic.

We are subject to risks related to public health crises such as the global pandemic associated with COVID-19. The COVID-19 pandemic may negatively impact our operations and revenues and overall financial condition by harming the ability or willingness of customers to pay for our products due to macro-economic conditions resulting from the pandemic or the operations of manufacturers, suppliers and other third parties with which we do business. These challenges will likely continue for the duration of the pandemic, which is uncertain, and the macro-economic effects of the pandemic will likely continue far beyond the duration of the pandemic.

Over the last year, numerous state and local jurisdictions have imposed, and others in the future may impose, “shelter-in-place” orders, quarantines, orders requiring non-essential businesses to remain closed, executive orders and similar government orders and restrictions for their residents to control the spread of COVID-19. The pandemic and such restrictions have resulted in a majority of our employees working remotely, work stoppages, slowdowns and delays, travel restrictions and cancellation of events, among other effects, thereby negatively impacting our operations. Other potential disruptions may include delays in processing registrations or approvals by applicable state or federal regulatory bodies; delays in product development efforts; disruptions to our supply chain; and additional government requirements or other incremental mitigation efforts that may further impact our capacity to manufacture, sell and support the use of our Eargo systems. In addition, even after the “shelter-in-place” orders, quarantines, executive orders and similar government orders and restrictions for their residents to control the spread of COVID-19 are lifted, we may continue to experience disruptions to our business. The ultimate impact of COVID-19 on our business, financial conditions, results of operations and growth depends on many factors and future developments beyond our control, which are highly uncertain and difficult to predict, including: the duration of the pandemic, a potential resurgence, the impact of variants, the roll-out and availability of effective vaccines against COVID-19 to the general population, the pace of recovery when the COVID-19 pandemic subsides, and the severity and duration of the global economic downturn that results from the ongoing pandemic.

31

While the potential economic impact brought by and the duration of COVID-19 may be difficult to assess or predict, the widespread pandemic has resulted in, and may continue to result in, significant disruption of global financial markets, reducing our ability to access capital, which could in the future negatively affect our liquidity, including our ability to repay our existing indebtedness. In addition, a recession or market correction resulting from the spread of COVID-19 could materially affect our business and the value of our common stock. The COVID-19 pandemic has also resulted in a significant increase in unemployment in the United States which may continue even after the pandemic subsides. The occurrence of any such events may lead to reduced disposable income and access to health insurance which could adversely affect the number of our products sold after the pandemic has subsided. Further, although we have experienced growth in our sales volume during the COVID-19 pandemic, this and any other favorable impacts we have experienced in connection with the pandemic may subside, and the ultimate effect of COVID-19 on our sales volume and other results of operations could differ substantially from our expectations and our experience to date.

Repair or replacement costs due to guarantees we provide on our products could have a material adverse effect on our business, financial condition and results of operations.

We provide product guarantees to our customers, both as a result of contractual and legal provisions and for marketing purposes. We allow for the return of products from direct customers within 45 days after the original sale and record estimated sales returns as a reduction of sales in the same period revenue is recognized. We also generally allow customers to return defective or damaged products for a replacement or refund. The term of the warranty provided is currently two years for Neo HiFi and one year for all other devices. Existing and future product guarantees place us at the risk of incurring future repair and/or replacement costs. As of March 31, 2021, we had provisions of $3.0 million relating to warranties. Substantial amounts of product guarantee claims could have a material adverse effect on our business, financial condition and results of operations.

In addition, we reserve for the estimated cost of product warranties when revenue is recognized, and we evaluate our warranty reserves periodically by reviewing our warranty repair experience. While we engage in product quality programs and processes, including monitoring and evaluating the quality of our components sourced from our suppliers and instituting methods to remotely detect and correct defects, our warranty obligation is affected by actual product defect rates, parts and equipment costs and service labor costs incurred in correcting a product defect. Our warranty reserves may be inadequate due to undetected product defects, unanticipated component failures or changes in estimates for material, labor and other costs we may incur to replace projected product defects. As a result, if actual product defect rates, parts and equipment costs or service labor costs exceed our estimates, it could have a material adverse effect on our business, financial condition and results of operations.

Our failure to successfully anticipate product returns may have a material adverse effect on our business, financial condition and results of operations.

Our net losses are affected by changes in reserves to account for product returns and product credits. The reserve for product returns accounts for customer returns of our products after purchase. We record a reserve for product returns based on historical return trends together with current product sales performance in each reporting period. If actual returns are greater than those projected and reserved for by management, additional sales returns may be recorded in the future. We do not currently have the ability to resell products that are returned. To the extent we are unable to successfully refurbish devices in the future, we will not be able to resell such devices. Further, the introduction of new products, changes in product mix, changes in consumer confidence or other competitive and general economic conditions may cause actual returns to differ from product return reserves. Any significant increase in product returns that exceeds our reserves could have a material adverse effect on our business, financial condition and results of operations.

Accelerated consolidation and formation of purchasing groups increases the pricing pressure on hearing aids.

Many purchasing groups, such as hearing aid clinics, retailers and hospital systems, are consolidating to create new entities with greater market power. Such groups, such as Costco and the VA, have used and may continue to use their increased purchasing power to negotiate price reductions or other concessions across our industry. This pricing leverage has resulted, and will likely continue to result, in downward pressure on the average selling prices of hearing aid products generally, including our own products. The forthcoming OTC regulations could further contribute to the pace of consolidation as well as the introduction of new entrants in the hearing aid market. Please see the risk factor titled, “Changes in the regulatory landscape for hearing aid devices could render our direct-to-consumer business model contrary to applicable regulatory requirements, and we may be required to seek additional clearance or approval for our products.” These factors could have a material adverse effect on our business, financial condition and results of operations.

The size and expected growth of our addressable market has not been established with precision and may be smaller than we estimate.

Our estimates of the addressable market for our current products and future products are based on a number of internal and third-party estimates and assumptions, including the prevalence of hearing loss across income levels and demographic profiles. While we believe our assumptions and the data underlying our estimates are reasonable, these assumptions and estimates may not be correct. For example, although we expect that the prevalence of hearing loss will increase as the U.S. population ages, demographic trends could shift and the prevalence of hearing loss could decrease. Furthermore, even if the prevalence of hearing loss increases as we expect,

32

technological or medical advances could provide alternatives to address hearing loss and reduce demand for hearing aids. As a result, our estimates of the size and expected growth of the addressable market for our current or future products may prove to be incorrect. If the actual number of consumers who would benefit from our products, the price at which we can sell future products or the addressable market for our products is smaller than we estimate, it could have a material adverse effect on our business, financial condition and results of operations.

Alternative technologies or therapies that improve or cure hearing loss could adversely affect our business, financial condition and results of operations.

If medical research were to lead to the discovery of alternative therapies or technologies that improve or cure the various forms of hearing loss as an alternative to the hearing aid, such as by surgical techniques, the use of pharmaceuticals or breakthrough bio-technological innovations or therapies, our profitability could suffer through a reduction in sales. The discovery of a cure for the various forms of hearing loss and the development of other alternatives to hearing aids could result in decreased demand for our products and, accordingly, could have a material adverse effect on our business, financial condition and results of operations.

Adapting our production capacities to evolving patterns of demand is expensive, time-consuming and subject to significant uncertainties. We may not be able to adequately predict consumer trends and may be unable to adjust our production in a timely manner.

We market our products directly to consumers in the United States, where we face the risk of significant changes in the demand for our products. If demand decreases, we will need to implement capacity and cost reduction measures involving restructuring costs. If demand increases, we will be required to make capital expenditures related to increased production and expenditures to hire and train production and sales and product support personnel. Adapting to changes in demand inherently lags behind the actual changes because it takes time to identify the change the market is undergoing and to implement any measures taken as a result. Finally, capacity adjustments are inherently risky because there is imperfect information, and market trends may rapidly intensify, ebb or even reverse. We have in the past not always been, and may in the future not be, able to accurately or timely predict trends in demand and consumer behavior or to take appropriate measures to mitigate risks and exploit opportunities resulting from such trends. Any inability in the future to identify or to adequately and effectively react to changes in demand could have a material adverse effect on our business, financial condition and results of operations.

International trade disputes could result in tariffs and other protectionist measures that could have a material adverse effect on our business, financial condition and results of operations.

Tariffs could increase the cost of our products and the raw materials that go into making them. These increased costs could adversely impact the gross margin that we earn on our products. Tariffs could also make our products more expensive for customers, which could make our products less competitive and reduce consumer demand. Countries may also adopt other protectionist measures that could limit our ability to offer our products. Political uncertainty surrounding international trade disputes and protectionist measures could also have a negative effect on consumer confidence and spending, which could have a material adverse effect on our business, financial condition and results of operations.

We are dependent on international manufacturers and suppliers, which exposes us to foreign operational and political risks that may harm our business.

We currently rely on a single manufacturer located in Thailand, Hana Microelectronics, for the manufacture of all of our products currently available for sale and have entered into a manufacturing services agreement with a second manufacturer located in Taiwan, Pegatron Corporation, for the manufacture of our next generation hearing aid. In addition, we rely on some third-party suppliers in Europe, Southeast Asia, Japan, China and the United States, who supply, among other things, certain of the technology and raw materials used in the manufacturing of our products. Our reliance on international operations exposes us to risks and uncertainties, including:

33

If any of these risks were to materialize, it could have a material adverse effect on our business, financial condition and results of operations.

If manufacturers and suppliers are unable to procure raw materials, semi-finished products and finished products on terms or within timeframes acceptable to us, our business may suffer.

We are dependent on the availability of raw materials necessary to manufacture the products we sell. We rely on third-party manufacturers and suppliers to identify and purchase quality raw materials, semi-finished goods and finished goods while seeking to preserve our quality standards. If our suppliers or third-party manufacturers experience shortages, limited access or increased costs of certain raw materials and other semi-finished or finished goods, including as a result of the COVID-19 pandemic, it may result in production delays or delays in deliveries of our products to our customers. Production by one or more manufacturers or suppliers may be suspended or delayed, temporarily or permanently, due to economic or technical problems such as the insolvency of the manufacturer, the failure of the manufacturing facilities or disruption of the production process, all of which are beyond our control. Any shortage, delay or interruption in the availability of our products may negatively affect our ability to meet consumer demand. As a result, our business may be unable to offer a satisfactory experience to customers, which could have a material adverse effect on our business, financial condition and results of operations.

We or the third parties upon whom we depend may be adversely affected by disasters, and our business continuity and disaster recovery plans may not adequately protect us from a serious disaster. Any interruption in the operations of our or our suppliers’ manufacturing or other facilities may have a material adverse effect on our business, financial condition and results of operations.

Our corporate headquarters are located in the San Francisco Bay Area, which has experienced both severe earthquakes and wildfires. We do not carry earthquake insurance. The current sole manufacturer of our hearing aid finished products is located in Thailand, which has experienced landslides, flooding, tropical storms and tsunamis. We have entered into a manufacturing services agreement with a second manufacturer located in Taiwan, which has also experienced landslides, flooding, tropical storms and tsunamis. Our customer support operations are based in Nashville, Tennessee, and our third-party provider’s distribution facilities are based in Louisville, Kentucky, both of which have experienced flooding and tornadoes. Severe weather, natural disasters and other calamities, such as pandemics (including COVID-19), earthquakes, tsunamis and hurricanes, fires and explosions, accidents, mechanical failures, unscheduled downtimes, civil unrest, strikes, transportation interruptions, unpermitted discharges or releases of toxic or hazardous substances, other environmental risks, sabotage, geopolitical unrest, political instability, terrorism or acts of war, could severely disrupt our operations, or our third-party manufacturers’ and suppliers’ operations, and have a material adverse effect on our business, financial condition and results of operations.

If a natural disaster, power outage or other event occurred that prevented us from using all or a significant portion of our headquarters or other facilities, or those of our third-party manufacturers or suppliers, that damaged critical infrastructure, such as our enterprise financial systems or manufacturing resource planning and enterprise quality systems, or that otherwise disrupted operations, it may be difficult or, in certain cases, impossible, for us to continue our business for a substantial period of time. A mechanical failure or disruption affecting any major operating line may result in a disruption to our ability to supply customers, and standby capacity may not be available. The disaster recovery and business continuity plans we have in place currently are limited and are unlikely to prove adequate in the event of a serious disaster or similar event. The potential impact of any disruption would depend on the nature and extent of the damage caused by a disaster. There can be no assurance that alternative production capacity will be available in the future in the event of a major disruption or, if it is available, that it could be obtained on favorable terms. We may incur substantial expenses as a result of the limited nature of our disaster recovery and business continuity plans, which, particularly when taken together with our lack of earthquake insurance, could have a material adverse effect on our business, financial condition and results of operations.

Furthermore, integral parties in our supply chain are similarly vulnerable to natural disasters or other sudden, unforeseen and severe adverse events. If such an event were to affect our supply chain, it could have a material adverse effect on our business, financial condition and results of operations.

We may be deemed to manufacture or contract to manufacture products that contain “conflict minerals.”

While we do not believe we manufacture or contract to manufacture products that contain conflict minerals, we may be deemed to manufacture or contract to manufacture products that contain certain minerals that have been designated as “conflict minerals” under the Dodd-Frank Wall Street Reform and Consumer Protection Act. As a result, in future periods, we may be required to diligence the origin of such minerals and disclose and report whether or not such minerals originated in the Democratic Republic of the Congo or adjoining countries. The implementation of these new requirements could adversely affect the sourcing, availability and pricing of

34

minerals used in the manufacture of our products. In addition, we may incur additional costs to comply with the disclosure requirements, including costs related to determining the source of any of the relevant minerals and metals used in our products.

Any future international expansion will subject us to additional costs and risks that may have a material adverse effect on our business, financial condition and results of operations.

Historically, all of our sales have been to customers in the United States. To the extent we enter into international markets in the future, there are significant costs and risks inherent in conducting business in international markets. If we expand, or attempt to expand, into foreign markets, we will be subject to new business risks, in addition to regulatory risks. In addition, expansion into foreign markets imposes additional burdens on our executive and administrative personnel, finance and legal teams, research and marketing teams and general managerial resources.

We have limited experience with regulatory environments and market practices internationally, and we may not be able to penetrate or successfully operate in new markets. We may also encounter difficulty expanding into international markets because of limited brand recognition in certain parts of the world, leading to delayed acceptance of our products by consumers in these international markets. If we are unable to expand internationally and manage the complexity of international operations successfully, it could have a material adverse effect on our business, financial condition and results of operations. If our efforts to introduce our products into foreign markets are not successful, we may have expended significant resources without realizing the expected benefit. Ultimately, the investment required for expansion into foreign markets could exceed the results of operations generated from this expansion.

Our Loan Agreement contains restrictions that limit our flexibility in operating our business.

In June 2018, we entered into the 2018 Loan, as amended in January 2019, May 2020 and in September 2020, with Silicon Valley Bank. We borrowed $15.0 million upon the closing of the September 2020 amendment, a portion of which was used to repay in full the outstanding principal amount of the previously funded term loan. As of March 31, 2021, $15.0 million in aggregate principal amount was outstanding under the term loan facility. The 2018 Loan has a maturity date of September 1, 2024. The 2018 Loan contains various covenants that limit our ability to engage in specified types of transactions without Silicon Valley Bank’s prior consent. These covenants limit our ability to, among other things:

In addition, the 2018 Loan requires us to maintain a certain percentage of our total cash holdings in accounts with Silicon Valley Bank. The covenants in the 2018 Loan limit our ability to take certain actions and, in the event that we breach one or more covenants, Silicon Valley Bank may choose to declare an event of default and require that we immediately repay all amounts outstanding of the aggregate principal amount of term loans funded under the 2018 Loan, plus exit fees, prepayment premiums, penalties and interest, and foreclose on the collateral granted to it to secure such indebtedness. Such repayment could have a material adverse effect on our business, financial condition and results of operations.

We are subject to a number of risks related to the credit card and debit card payments we accept.

We accept payments through credit and debit card transactions. For credit and debit card payments, we pay interchange and other fees, which may increase over time. An increase in those fees may require us to increase the prices we charge and would increase our operating expenses, either of which could have a material adverse effect on our business, financial condition and results of operations.

If we or our processing vendors fail to maintain adequate systems for the authorization and processing of credit and debit card transactions, it could cause one or more of the major credit card companies to disallow our continued use of their payment products. In addition, if these systems fail to work properly and, as a result, we do not charge our customers’ credit or debit cards on a timely basis, or at all, it could have a material adverse effect on our business, financial condition and results of operations.

The payment methods that we offer also subject us to potential fraud and theft by criminals, who are becoming increasingly more sophisticated in exploiting weaknesses that may exist in the payment systems. If we fail to comply with applicable rules or requirements for the payment methods we accept, or if payment-related data is compromised due to a breach, we may be liable for

35

significant costs incurred by payment card issuing banks and other third parties or subject to fines and higher transaction fees, or our ability to accept or facilitate certain types of payments may be impaired. In addition, our customers could lose confidence in certain payment types, which may result in a shift to other payment types or potential changes to our payment systems that may result in higher costs. If we fail to adequately control fraudulent credit card transactions, we may face civil liability, diminished public perception of our security measures and significantly higher card-related costs, each of which could have a material adverse effect on our business, financial condition and results of operations.

We are also subject to payment card association operating rules, certification requirements and rules governing electronic funds transfers, which could change or be reinterpreted to make it more difficult for us to comply. We are required to comply with payment card industry security standards. Failing to comply with those standards may violate payment card association operating rules, federal and state laws and regulations and the terms of our contracts with payment processors. Any failure to comply fully also may subject us to fines, penalties, damages and civil liability, and may result in the loss of our ability to accept credit and debit card payments. Further, there is no guarantee that such compliance will prevent illegal or improper use of our payment systems or the theft, loss or misuse of data pertaining to credit and debit cards, card holders and transactions.

If we are unable to maintain our chargeback rate or refund rates at acceptable levels, our processing vendor may increase our transaction fees or terminate its relationship with us. Any increases in our credit and debit card fees could harm our results of operations, particularly if we elect not to raise our rates for our products to offset the increase. The termination of our ability to process payments on any major credit or debit card would significantly impair our ability to operate our business.

If we fail to attract and retain senior management and key technology personnel, our business may be materially and adversely affected.

Our success depends in part on our continued ability to attract, retain and motivate highly qualified management and clinical and scientific personnel. We are highly dependent upon our senior management, particularly our President and Chief Executive Officer, as well as our senior technology personnel and other members of our senior management team. The unplanned loss of the services of any of our members of senior management could adversely affect our business until a suitable replacement can be found.

Competition for qualified personnel in the medical device field in general and the audiology field specifically is intense due to the limited number of individuals who possess the training, skills and experience required by our industry. In addition, our future growth and success also depend on our ability to attract, recruit, develop and retain skilled managerial, sales, administration, operating and technical personnel. We will continue to review, and where necessary, strengthen our senior management as the needs of the business develop, including through internal promotion and external hires. However, there may be a limited number of persons with the requisite competencies to serve in these positions and we cannot assure you that we would be able to locate or employ such qualified personnel on terms acceptable to us, or at all. Therefore, the unplanned loss of one or more of our key personnel, or our failure to attract and retain additional key personnel, could have a material adverse effect on our business, financial condition and results of operations. In addition, to the extent we hire personnel from competitors, we may be subject to allegations that they have been improperly solicited or that they have divulged proprietary or other confidential information, or that their former employers own their research output.

We rely on our own direct sales force, and if we are unable to maintain or expand our sales force, it could harm our business. Additionally, our reliance on our direct sales force may result in higher fixed costs than our competitors and may slow our ability to reduce costs in the face of a sudden decline in demand for our products.

We rely on our own direct sales force to market and sell our products. We do not have any long-term employment contracts with the members of our direct sales force. Our operating results are directly dependent upon the sales and marketing efforts of our sales and customer support team. If our employees fail to adequately promote, market and sell our products, our sales could significantly decrease. As we launch new products, expand our product offerings and increase our marketing efforts with respect to existing products, we will need to expand the reach of our marketing and sales networks. Our future success will depend largely on our ability to continue to hire, train, retain and motivate skilled employees with significant technical knowledge in various areas. New hires require training and take time to achieve full productivity.

Additionally, most of our competitors rely predominantly on third-party distributors. A direct sales force may subject us to higher fixed costs than those of competitors that market their products through independent third parties, due to the costs that we will bear associated with employee benefits, training and managing sales personnel. As a result, we could be at a competitive disadvantage. Additionally, these fixed costs may slow our ability to reduce costs in the face of a sudden decline in demand for our products, which could have a material adverse effect on our business, financial condition and results of operations.

We expect we will need to increase the size and scope of our organization, and we may experience difficulties in managing growth. A deterioration in our relationships with our employees could have an adverse impact on our business.

We expect to expand our managerial, operational, finance and other resources in order to manage our operations and continue our research and development activities. We anticipate having international operations, which would subject us to the legal, political, regulatory and social requirements and economic conditions of these jurisdictions, and create a variety of potential operational

36

challenges due to a variety of international factors, including local labor laws and regulations and managing a geographically dispersed workforce. Our management and personnel, systems and facilities currently in place may not be adequate to support this future growth. Our need to effectively execute our growth strategy requires that we:

Maintaining good relationships with our employees is crucial to our operations. As a result, any deterioration of the relationships with our employees could have a material adverse effect on our business, financial condition and results of operations.

Additionally, material disruption to our business as a result of strikes, work stoppages or other labor disputes could disrupt our operations, result in a loss of reputation, increased wages and benefits or otherwise have a material adverse effect on our business, financial condition and results of operations.

We rely on our relationship with a professional employer organization for our human relations function and as a co-employer of our personnel, and if that party failed to perform its responsibilities under that relationship, our relations with our employees could be damaged and we could incur liabilities that could have a material adverse effect on our business.

All of our personnel, including our executive officers, are co-employees of Eargo and a professional employer organization, Insperity. Under the terms of our arrangement, Insperity is the formal employer of all of our personnel and is responsible for administering all payroll, including tax withholding, and providing health insurance and other benefits for these individuals, and our employees are governed by the work policies created by Insperity. We reimburse Insperity for these costs, and pay Insperity an administrative fee for its services. If Insperity fails to comply with applicable laws or its obligations under this arrangement, or creates work policies that are viewed unfavorably by employees, our relationship with our employees could be damaged. We could, under certain circumstances, be held liable for a failure by Insperity to appropriately pay, or withhold and remit required taxes from payments to, our employees. In such a case, our potential liability could be significant and could have a material adverse effect on our business.

Our ability to use our net operating loss carryforwards and certain other tax attributes may be limited.

We do not expect to become profitable in the near future, may never achieve profitability, and have incurred substantial net operating losses (“NOLs”) during our history. Unused NOLs will carry forward to offset a portion of future taxable income, if any, until such unused NOLs expire, if ever. Federal NOLs generated after December 31, 2017 are not subject to expiration, but the yearly utilization of such federal NOLs is limited to 80 percent of taxable income for taxable years beginning after December 31, 2020. In addition, in general, under Sections 382 and 383 of the Internal Revenue Code of 1986, as amended, a corporation that undergoes an “ownership change” is subject to limitations on its ability to utilize its prechange NOLs or tax credits to offset future taxable income or taxes. For these purposes, an ownership change generally occurs where the aggregate stock ownership of one or more stockholders or groups of stockholders who owns at least 5% of a corporation’s stock increases its ownership by more than 50 percentage points over its lowest ownership percentage within a specified testing period. If finalized, Treasury Regulations currently proposed under Section 382 of the Code may further limit our ability to utilize our pre-change NOLs or credits if we undergo a future ownership change. We believe we have experienced more than one ownership change in the past, and we may experience additional ownership changes in the future as a result of shifts in our stock ownership (some of which shifts are outside our control). As a result, even if we attain profitability, we may be unable to use a material portion of our NOLs and other tax attributes.

Risks relating to intellectual property and legal and regulatory matters

Our success depends in part on our proprietary technology, and if we are unable to obtain, maintain or successfully enforce our intellectual property rights, the commercial value of our products and services will be adversely affected and our competitive position may be harmed.

Our success and ability to compete depend in part on our ability to maintain and enforce existing intellectual property and to obtain, maintain and enforce further intellectual property protection for our products and services, both in the United States and in other countries. We attempt to protect our intellectual property rights through a combination of patent, trademark, copyright and trade secret laws, as well as licensing agreements and third-party confidentiality and assignment agreements. Our inability to do so could harm our competitive position. As of March 31, 2021, we had 22 issued U.S. patents, 16 patents outside the United States, 4 pending U.S. patent applications and 10 pending foreign patent applications.

We rely on our portfolio of issued and pending patent applications in the United States and other countries to protect our intellectual property and our competitive position. However, the patent positions of medical device companies, including our patent position, may involve complex legal and factual questions, and, therefore, the scope, validity and enforceability of any patent claims that we may

37

obtain cannot be predicted with certainty. Accordingly, we cannot provide any assurances that any of our issued patents have, or that any of our currently pending or future patent applications that mature into issued patents will include, claims with a scope sufficient to protect our products and services. Our pending and future patent applications may not result in the issuance of patents or, if issued, may not issue in a form that will be advantageous to us. While we generally apply for patents in those countries where we intend to make, have made, use or sell patented products, we may not accurately predict all of the countries where patent protection will ultimately be desirable. If we fail to timely file for a patent, we may be precluded from doing so at a later date. Additionally, any patents issued to us may be challenged, narrowed, invalidated, held unenforceable or circumvented, or may not be sufficiently broad to prevent third parties from producing competing products similar in design to our products.

Changes in either patent laws or in interpretations of patent laws in the United States and other countries may diminish the value of our intellectual property or narrow the scope of our patent protection, which in turn could diminish the commercial value of our products and services. In addition, any protection afforded by foreign patents may be more limited than that provided under U.S. patent and intellectual property laws. There can be no assurance that any of our patents, any patents licensed to us or any patents which we may be issued in the future will provide us with a competitive advantage or afford us protection against infringement by others, or that the patents will not be successfully challenged or circumvented by third parties, including our competitors. Further, there can be no assurance that we will have adequate resources to enforce our patents. Any of the foregoing could have a material adverse effect on our competitive position, business, financial condition, results of operations, and prospects.

If our trademarks and trade names are not adequately protected, we may not be able to build name recognition in our markets of interest and our competitive position may be harmed.

We rely on our trademarks, trade names and brand names to distinguish our products from the products of our competitors, and have registered or applied to register many of these trademarks. There can be no assurance that our trademark applications will be approved. Third parties may also oppose our trademark applications or otherwise challenge our use of the trademarks. In the event that our trademarks are successfully challenged, we could be forced to rebrand our products, which could result in loss of brand recognition, and could require us to devote resources to advertising and marketing new brands. Further, there can be no assurance that competitors will not infringe our trademarks or that we will have adequate resources to enforce our trademarks. We also license third parties to use our trademarks. In an effort to preserve our trademark rights, we enter into license agreements with these third parties, which govern the use of our trademarks and require our licensees to abide by quality control standards with respect to the goods and services that they provide under our trademarks. Although we make efforts to monitor the use of our trademarks by our licensees, there can be no assurance that these efforts will be sufficient to ensure that our licensees abide by the terms of their licenses. In the event that our licensees fail to do so, our trademark rights could be diluted. Any of the foregoing could have a material adverse effect on our competitive position, business, financial condition, results of operations, and prospects.

We may become involved in lawsuits to protect or enforce our intellectual property, which could be expensive, time-consuming and unsuccessful.

Third parties, including our competitors, could be infringing, misappropriating or otherwise violating our intellectual property rights. While we are not aware of any unauthorized use of our intellectual property, we do not regularly conduct monitoring for unauthorized use at this time. In the future, we may from time to time, seek to analyze our competitors’ products and services, or seek to enforce our rights against potential infringement, misappropriation or violation of our intellectual property. However, the steps we have taken to protect our proprietary rights may not be adequate to enforce our rights as against such infringement, misappropriation or violation of our intellectual property. We may not be able to detect unauthorized use of, or take appropriate steps to enforce, our intellectual property rights. Any inability to meaningfully enforce our intellectual property rights could harm our ability to compete and reduce demand for our products and services.

We may in the future become involved in lawsuits to protect or enforce our intellectual property rights. An adverse result in any litigation proceeding could harm our business. In any lawsuit we bring to enforce our intellectual property rights, a court may refuse to stop the other party from using the technology at issue on grounds that our intellectual property rights do not cover the technology in question. If we initiate legal proceedings against a third party to enforce a patent covering a product, the defendant could counterclaim that such patent is invalid or unenforceable. In patent litigation in the United States, defendant counterclaims alleging invalidity or unenforceability are commonplace. Grounds for a validity challenge could be an alleged failure to meet any of several statutory requirements, including lack of novelty, obviousness, or non-enablement. Grounds for an unenforceability assertion could be an allegation that someone connected with prosecution of the patent withheld relevant information from the United States Patent and Trademark Office (“USPTO”) or made a misleading statement, during prosecution. Mechanisms for such challenges include re-examination, post-grant review, inter partes review, interference proceedings, derivation proceedings, and equivalent proceedings in foreign jurisdictions (e.g., opposition proceedings). Such proceedings could result in the revocation of, cancellation of, or amendment to our patents in such a way that they no longer cover our products, or any future products that we may develop.

The outcome following legal assertions of invalidity and unenforceability is unpredictable. With respect to the validity question, for example, we cannot be certain that there is no invalidating prior art, of which we and the patent examiner were unaware during prosecution. If a third party were to prevail on a legal assertion of invalidity or unenforceability, we would lose at least part, and

38

perhaps all, of the patent protection on our products. Such a loss of patent protection would have a material adverse impact on our business, financial condition, results of operations, and prospects.

Because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during litigation. There could also be public announcements of the results of hearing, motions, or other interim developments. If securities analysts or investors perceive these results to be negative, it could have a material adverse effect on the price of shares of our common stock. Even if we ultimately prevail, a court may decide not to grant an injunction against further infringing activity and instead award only monetary damages, which may not be an adequate remedy. Furthermore, the monetary cost of such litigation and the diversion of the attention of our management could outweigh any benefit we receive as a result of the proceedings. Uncertainties resulting from the initiation and continuation of patent litigation or other proceedings could have a material adverse effect on our business.

If we infringe, misappropriate or otherwise violate the intellectual property rights of third parties or are subject to an intellectual property infringement or misappropriation claim, our ability to grow our business may be severely limited and our business could be adversely affected.

We may in the future be the subject of patent or other litigation. Our products and services may infringe, or third parties may claim that they infringe, intellectual property rights covered by patents or patent applications under which we do not hold licenses or other rights. Third parties may own or control these patents and patent applications in the United States and abroad. These third parties could bring claims against us that would cause us to incur substantial expenses and, if successfully asserted against us, could cause us to pay substantial damages. Further, if a patent infringement or other intellectual property-related lawsuit were brought against us, we could be forced to stop or delay production or sales of the product that is the subject of the suit. From time to time, we have received and may in the future receive letters from third parties drawing our attention to their patent rights. While we take steps to ensure that we do not infringe upon, misappropriate or otherwise violate the rights of others, there may be other more pertinent rights of which we are presently unaware. The defense and prosecution of intellectual property lawsuits could result in substantial expense to us and significant diversion of effort by our technical and management personnel. An adverse determination of any litigation or interference proceeding to which we may become a party could subject us to significant liabilities. As a result of patent infringement claims, or in order to avoid potential claims, we may choose or be required to seek a license from the third party and be required to pay significant license fees, royalties or both. Licenses may not be available on commercially reasonable terms, or at all, in which event our business would be materially and adversely affected. Even if we were able to obtain a license, the rights may be nonexclusive, which could result in our competitors gaining access to the same intellectual property. Ultimately, if we are unable to obtain such licenses, we could be forced to cease some aspect of our business operations, which could harm our business significantly.

Recent changes in U.S. patent laws may limit our ability to obtain, defend and/or enforce our patents.

Recent patent reform legislation could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents. The Leahy-Smith America Invents Act (the “Leahy-Smith Act”) includes a number of significant changes to U.S. patent law. These include provisions that affect the way patent applications are prosecuted and also affect patent litigation. The USPTO recently developed new regulations and procedures to govern administration of the Leahy-Smith Act, and many of the substantive changes to patent law associated with the Leahy-Smith Act, and in particular, the first to file provisions, which became effective on March 16, 2013. The first to file provisions limit the rights of an inventor to patent an invention if not the first to file an application for patenting that invention, even if such invention was the first invention. Accordingly, it is not clear what, if any, impact the Leahy-Smith Act will have on the operation of our business.

However, the Leahy-Smith Act and its implementation could increase the uncertainties and costs surrounding the enforcement and defense of our issued patents. For example, the Leahy-Smith Act provides that an administrative tribunal known as the Patent Trial and Appeals Board (“PTAB”) provides a venue for challenging the validity of patents at a cost that is much lower than district court litigation and on timelines that are much faster. Although it is not clear what, if any, long-term impact the PTAB proceedings will have on the operation of our business, the initial results of patent challenge proceedings before the PTAB since its inception in 2013 have resulted in the invalidation of many U.S. patent claims. The availability of the PTAB as a lower-cost, faster and potentially more potent tribunal for challenging patents could increase the likelihood that our own patents will be challenged, thereby increasing the uncertainties and costs of maintaining and enforcing them.

We may be subject to claims that we or our employees have misappropriated the intellectual property of a third party, including trade secrets or know-how, or are in breach of non-competition or non-solicitation agreements with our competitors and third parties may claim an ownership interest in intellectual property we regard as our own.

Many of our employees and consultants were previously employed at or engaged by other medical device companies, including our competitors or potential competitors. Some of these employees, consultants and contractors may have executed proprietary rights, non-disclosure and non-competition agreements in connection with such previous employment. Although we try to ensure that our employees and consultants do not use the intellectual property, proprietary information, know-how or trade secrets of others in their work for us, we may be subject to claims that we or these individuals have, inadvertently or otherwise, misappropriated the intellectual

39

property or disclosed the alleged trade secrets or other proprietary information, of these former employers, competitors or other third parties. Additionally, we may be subject to claims from third parties challenging our ownership interest in or inventorship of intellectual property we regard as our own, based on claims that our agreements with employees or consultants obligating them to assign intellectual property to us are ineffective or in conflict with prior or competing contractual obligations to assign inventions to another employer, to a former employer, or to another person or entity. Litigation may be necessary to defend against claims, and it may be necessary or we may desire to enter into a license to settle any such claim; however, there can be no assurance that we would be able to obtain a license on commercially reasonable terms, if at all. If our defense to those claims fails, in addition to paying monetary damages or a settlement payment, a court could prohibit us from using technologies, features or other intellectual property that are essential to our products, if such technologies or features are found to incorporate or be derived from the trade secrets or other proprietary information of the former employers. An inability to incorporate technologies, features or other intellectual property that are important or essential to our products could have a material adverse effect on our business and competitive position, and may prevent us from selling our products. In addition, we may lose valuable intellectual property rights or personnel. Even if we are successful in defending against these claims, litigation could result in substantial costs and could be a distraction to management. Any litigation or the threat thereof may adversely affect our ability to hire employees or contract with independent sales representatives. A loss of key personnel or their work product could hamper or prevent our ability to commercialize our products, which could materially and adversely affect our business, financial condition, operating results, cash flows and prospects.

We operate in a regulated industry and changes in regulation or the implementation of existing regulation could affect our operations.

Our products and our business activities are subject to rigorous regulation in the jurisdictions in which we operate. In particular, these laws govern: (i) coverage and reimbursement by the national health services or by private health insurance services for the purchase of hearing aids; (ii) the supply of hearing aids to the public and, more specifically, the training and qualifications required to practice the profession of hearing aid fitting specialist; and (iii) the development, testing, manufacturing, labeling, premarket clearance or approval and marketing, advertising, promotion, export and import of our hearing aids. Accordingly, our business may be affected by changes in any such laws and regulations and, in particular, by changes to the conditions for coverage, the way in which reimbursement is calculated, the ability to obtain national health insurance coverage or the role of the ear, nose and throat specialists.

While the various agencies that enforce the European Union’s (“EU”) Medical Device Directive, the Japanese Ministry of Health, Labor and Welfare and the FDA are the regulatory bodies affecting us most prominently, there are numerous other regulatory schemes at the international, national and sub-national levels to which we are subject. These regulations can be burdensome and subject to change on short notice, exposing us to the risk of increased costs and business disruption, and regulatory premarket clearance or approval requirements may affect or delay our ability to market our new products. We cannot guarantee that we will be able to obtain marketing clearance or approval for our new products, or enhancements or modifications to existing products. If we do, such clearance or approval may take a significant amount of time and require the expenditure of substantial resources. Further, such clearance or approval may involve stringent testing procedures, modifications, repairs or replacements of our products and could result in limitations on the proposed uses of our products. Regulatory authorities and legislators have been recently increasing their scrutiny of the healthcare industry, and there are ongoing regulatory efforts to reduce healthcare costs that may intensify in the future. Our business is also sensitive to any changes in tort and product liability laws.

Regulations pertaining to our products have become increasingly stringent and more common, particularly in developing countries whose regulations approach standards previously attained only by some Organisation for Economic Co-operation and Development countries, and we may become subject to more rigorous regulation by governmental authorities in the future. Conversely, however, the regulation of hearing aids as medical devices provides a barrier to entry for new competitors. For example, if certain of our products were made subject to less stringent regulation by the FDA in the United States, then products similar to ours may be marketed and sold more freely, and our products may become commoditized. If the markets in which we operate become less regulated, those barriers to entry may be eliminated or reduced, which could have a material adverse effect on our business, financial condition and results of operations.

Both before and after a product is commercially released, we have ongoing responsibilities under various laws and regulations. If a regulatory authority were to conclude that we are not in compliance with applicable laws or regulations, or that any of our hearing aids are ineffective or pose an unreasonable risk for the end-user, the authority may ban such hearing aids, detain or seize adulterated or misbranded hearing aids, order a recall, repair, replacement or refund of such instruments, and require us to notify health professionals and others that the devices present unreasonable risks of substantial harm to the public health. A regulatory authority may also impose operating restrictions, enjoin and restrain certain violations of applicable law pertaining to medical devices, and assess civil or criminal penalties against our officers, employees or us. The regulatory authority may also recommend prosecution by law enforcement agencies. Any governmental law or regulation, existing or imposed in the future, or enforcement action taken may have a material adverse effect on our business, financial condition and results of operations.

40

Our hearing aids are subject to extensive government regulation at the federal and state level, and our failure to comply with applicable requirements could harm our business.

Our hearing aids are medical devices that are subject to extensive regulation in the United States, including by the FDA and state agencies. The FDA regulates, among other things, the design, development, research, manufacture, testing, labeling, marketing, promotion, advertising, sale, import and export of hearing aid devices, such as those we market. Applicable medical device regulations are complex and have tended to become more stringent over time. Regulatory changes could result in restrictions on our ability to carry out or expand our operations.

The FDA classifies medical devices into one of three classes (Class I, II, or III) based on the degree of risk associated with a device and the level of regulatory control deemed necessary to ensure its safety and effectiveness. Class I devices are those for which safety and effectiveness can be assured by adherence to the FDA’s general controls for medical devices, which include compliance with the FDA’s current good manufacturing practices for devices, as reflected in the Quality System Regulation (“QSR”), establishment registration and device listing, reporting of adverse events, and truthful, non-misleading labeling, advertising, and promotional materials. Some Class I devices also require premarket clearance by the FDA through the premarket notification process set forth in Section 510(k) of the FDCA.

The FDA has classified air-conduction hearing aids as Class I and Class II devices exempt from premarket review procedures, and although we comply with applicable Class I and Class II medical device requirements, none of our devices have been reviewed by the FDA. Moreover, because the FDA has stated that it does not intend to enforce the medical evaluation requirements for dispensation of Class I or Class II air-conduction hearing aids to individuals 18 years of age and older, our devices are available directly to consumers without the medical evaluation of a licensed practitioner. If our current or future products become subject to the pending OTC hearing aid pathway, are deemed to be Class II “self-fitting air-conduction hearing aids,” or are otherwise required to undergo premarket review, we may be required to first receive clearance under Section 510(k) of the FDCA or approval of a premarket approval (“PMA”) application from the FDA. If this were to occur for our currently marketed devices, the FDA could require us to remove our products from the market until we receive applicable regulatory clearance or approval, which would significantly impact our business.

In the 510(k) clearance process, before a device may be marketed, the FDA must determine that the proposed device is “substantially equivalent” to a legally-marketed “predicate” device, which includes a device that has been previously cleared through the 510(k) process, a device that was legally marketed prior to May 28, 1976 (a pre-amendments device), a device that was originally on the U.S. market pursuant to an approved PMA application and later down-classified, or a 510(k)-exempt device. To be “substantially equivalent,” the proposed device must have the same intended use as the predicate device, and either have the same technological characteristics as the predicate device or have different technological characteristics and not raise different questions of safety or effectiveness than the predicate device. Clinical data are sometimes required to support substantial equivalence. In the PMA process, the FDA must determine that a proposed device is safe and effective for its intended use based, in part, on extensive data, including, but not limited to, technical, pre-clinical, clinical trial, manufacturing and labeling data. The PMA process is typically required for devices that are deemed to pose the greatest risk, such as life-sustaining, life-supporting or implantable devices.

Modifications to products that are approved through a PMA application generally require FDA approval. Similarly, certain modifications made to products cleared through a 510(k) may require a new 510(k) clearance. Both the PMA approval and the 510(k) clearance process can be expensive, lengthy and uncertain. The FDA’s 510(k) clearance process usually takes from three to 12 months, but can last longer. The process of obtaining a PMA is much more costly and uncertain and generally takes from one to three years, or even longer, from the time the application is filed with the FDA. In addition, a PMA generally requires the performance of one or more clinical trials. Despite the time, effort and cost, we cannot assure you that any particular device will be approved or cleared by the FDA.

Any delay or failure to obtain necessary regulatory clearances or approvals if required in the future could harm our business.

The FDA can delay, limit or deny clearance or approval of a device for many reasons, including:

In addition, the FDA may change its clearance and approval policies, adopt additional regulations or revise existing regulations, or take other actions, which may prevent or delay our ability to introduce new products or modify our current products on a timely basis. For example, in November 2018, FDA officials announced forthcoming steps that the agency intends to take to modernize the 510(k) premarket notification pathway, and in September 2019, the FDA finalized guidance to describe an optional “safety and performance based” premarket review pathway for manufacturers of certain “well-understood device types,” which would allow manufacturers to demonstrate substantial equivalence by meeting objective safety and performance criteria established by the FDA, obviating the need for manufacturers to compare the safety and performance of their medical devices to specific predicate devices in the clearance

41

process. If we are required to seek premarket review of our devices in the future, these proposals and reforms could impose additional regulatory requirements on us and increase the costs of compliance.

Disruptions at the FDA and other government agencies caused by funding shortages or global health concerns could hinder their ability to hire, retain or deploy key leadership and other personnel, or otherwise delay or prevent necessary regulatory clearances or approvals, which could negatively impact our business.

The ability of the FDA to review and clear or approve new products can be affected by a variety of factors, including government budget and funding levels, statutory, regulatory and policy changes, the FDA’s ability to hire and retain key personnel and accept the payment of user fees, and other events that may otherwise affect the FDA’s ability to perform routine functions. Average review times at the agency have fluctuated in recent years as a result. In addition, government funding of other government agencies that fund research and development activities is subject to the political process, which is inherently fluid and unpredictable. Disruptions at the FDA and other agencies may also slow the time necessary for new medical devices or modifications to be cleared or approved by government agencies, which would adversely affect our business. For example, over the last several years, including for 35 days beginning on December 22, 2018, the U.S. government has shut down several times and certain regulatory agencies, such as the FDA, have had to furlough critical FDA employees and stop critical activities.

Separately, in response to the COVID-19 pandemic, on March 10, 2020, the FDA announced its intention to postpone most inspections of foreign manufacturing facilities, and on March 18, 2020, the FDA temporarily postponed routine surveillance inspections of domestic manufacturing facilities. Subsequently, on July 10, 2020, the FDA announced its intention to resume certain on-site inspections of domestic manufacturing facilities subject to a risk-based prioritization system. The FDA intends to use this risk-based assessment system to identify the categories of regulatory activity that can occur within a given geographic area, ranging from mission critical inspections to resumption of all regulatory activities. Regulatory authorities outside the United States may adopt similar restrictions or other policy measures in response to the COVID-19 pandemic. If a prolonged government shutdown occurs, or if global health concerns continue to prevent the FDA or other regulatory authorities from conducting their regular inspections, reviews or other regulatory activities, it could significantly impact the ability of the FDA or other regulatory authorities to timely review and process our regulatory submissions, which could have a material adverse effect on our business.

Legislative or regulatory healthcare reforms may make it more difficult and costly to produce, market and distribute our products or to do so profitably.

Recent political, economic and regulatory influences are subjecting the healthcare industry to fundamental changes. Both the federal and state governments in the United States and foreign governments continue to propose and pass new legislation and regulations designed to contain or reduce the cost of healthcare, improve quality of care and expand access to healthcare, among other purposes. For example, the implementation of the Affordable Care Act has changed healthcare financing and delivery by both governmental and private insurers substantially and has affected medical device manufacturers significantly. Other legislative changes have also been proposed and adopted since the Affordable Care Act was enacted, which included, among other things, reductions to Medicare payments to providers of 2% per fiscal year. The Coronavirus Aid, Relief, and Economic Security Act (“CARES Act”) which was signed into law on March 27, 2020, designed to provide financial support and resources to individuals and businesses affected by the COVID-19 pandemic, suspended these reductions from May 1, 2020 through December 31, 2021, and extended the sequester by one year, through 2030. In addition, on January 2, 2013, the American Taxpayer Relief Act of 2012 was signed into law which, among other things, further reduced Medicare payments to certain providers, including hospitals. The Medicare Access and CHIP Reauthorization Act of 2015 (“MACRA”), enacted on April 16, 2015, repealed the formula by which Medicare made annual payment adjustments to physicians and replaced the former formula with fixed annual updates and a new system of incentive payments which began in 2019 that are based on various performance measures and physicians’ participation in alternative payment models such as accountable care organizations. Future legislation and regulations may result in decreased coverage and reimbursement for medical devices, which may further exacerbate industry-wide pressure to reduce the prices charged and market demand for medical devices. This could harm our ability to market and generate sales from our products.

We may face risks related to any future international sales, including the need to obtain necessary foreign regulatory clearance or approvals.

Sales of our products outside the United States will subject us to foreign regulatory requirements that vary widely from country to country. The time required to obtain clearances or approvals required by other countries may be longer than that required for FDA clearance or approval, and requirements for such approvals may differ from FDA requirements. We may be unable to obtain regulatory approvals and may also incur significant costs in attempting to obtain foreign regulatory approvals. If we experience delays in receipt of approvals to market our products in new jurisdictions, or if we fail to receive these approvals, we may be unable to market our products in international markets in a timely manner, if at all, which could materially impact our international expansion and adversely affect our business as a whole. Some international regulations may also limit the availability of our hearing aids to customers in certain jurisdictions without our first obtaining a license or engaging a third party to provide such financing, or limit the financing options we can offer our customers. If any of these risks were to materialize, they could limit our expected international growth and profitability, which could have a material adverse effect on our business, financial condition and results of operations.

42

Regulations in certain foreign countries may challenge our direct-to-consumer sales model.

Our business may also be affected by actions of domestic and foreign governments to restrict the activities of direct-to-consumer companies for various reasons, including a limitation on the ability of direct-to-consumer companies to operate without the involvement of a traditional retail channel. To the extent that we begin to offer our products in international markets, foreign governments may also introduce other forms of protectionist legislation, such as limitations or requirements on where the products can or must be produced or requirements that non-domestic companies doing or seeking to do business place a certain percentage of ownership of legal entities in the hands of local nationals to protect the commercial interests of its citizens. Customs laws, tariffs, import duties, export and import quotas and restrictions on repatriation of foreign earnings and/or other methods of accessing cash generated internationally, may negatively affect our local or corporate operations. Additionally, the U.S. government may impose restrictions on our ability to engage in business in other countries in connection with the foreign policy of the United States. Any such restrictions on our direct-to-consumer sales model in international jurisdictions could limit our ability to grow internationally, which could have a material adverse effect on our business, financial condition and results of operations.

Our hearing aids may cause or contribute to adverse medical events that we are required to report to the FDA, and if we fail to do so, we would be subject to sanctions that could harm our reputation, business, financial condition and results of operations. The discovery of serious safety issues with our products, or a recall of our products either voluntarily or at the direction of the FDA or another governmental authority, could have a negative impact on us.

We are subject to the FDA’s medical device reporting regulations and similar foreign regulations, which require us to report to the FDA when we receive or become aware of information that reasonably suggests that one or more of our hearing aids may have caused or contributed to a death or serious injury or malfunctioned in a way that, if the malfunction were to recur, it could cause or contribute to a death or serious injury. The timing of our obligation to report is triggered by the date we become aware of the adverse event as well as the nature of the event. We may fail to report adverse events of which we become aware within the prescribed timeframe. We may also fail to recognize that we have become aware of a reportable adverse event, especially if it is not reported to us as an adverse event or if it is an adverse event that is unexpected or removed in time from the initial use of the hearing aid device. If we fail to comply with our reporting obligations, the FDA could take action, including warning letters, untitled letters, administrative actions, criminal prosecution, imposition of civil monetary penalties, seizure of our products or, if premarket review is required in the future, delay in clearance of future products.

The FDA and foreign regulatory bodies have the authority to require the recall of commercialized medical device products in the event of material deficiencies or defects in design or manufacture of a product or in the event that a product poses an unacceptable risk to health. The FDA’s authority to require a recall must be based on a finding that there is reasonable probability that the device could cause serious injury or death. We may also choose to voluntarily recall a product if any material deficiency is found. A government-mandated or voluntary recall by us could occur as a result of an unacceptable risk to health, component failures, malfunctions, manufacturing defects, labeling or design deficiencies, packaging defects or other deficiencies or failures to comply with applicable regulations. We cannot assure you that product defects or other errors will not occur in the future. Recalls involving our hearing aids could have a material adverse effect on our business, financial condition and results of operations.

Medical device manufacturers are required to maintain certain records of recalls and corrections, even if they are not reportable to the FDA. We may initiate voluntary withdrawals or corrections for our hearing aid devices in the future that we determine do not require notification of the FDA. If the FDA disagrees with our determinations, it could require us to report those actions as recalls and we may be subject to enforcement action. A future recall announcement could harm our reputation with customers, potentially lead to product liability claims against us and negatively affect our sales.

We must manufacture our products in accordance with federal and state regulations, and we could be forced to recall our products or terminate production if we fail to comply with these regulations.

The methods used in, and the facilities used for, the manufacture of our hearing aid devices must comply with the FDA’s QSR, which is a complex regulatory scheme that covers the procedures and documentation of the design, testing, production, process controls, quality assurance, labeling, packaging, handling, storage, distribution, servicing and shipping of medical devices. Furthermore, we are required to verify that our suppliers maintain facilities, procedures and operations that comply with our quality and applicable regulatory requirements. The FDA enforces the QSR through periodic announced or unannounced inspections of medical device manufacturing facilities, which may include the facilities of subcontractors, and such inspections can result in warning letters, untitled letters and other regulatory communications and adverse publicity. Our hearing aid devices are also subject to similar state regulations and various laws and regulations of foreign countries governing manufacturing.

We cannot guarantee that we or any subcontractors will take the necessary steps to comply with applicable regulations, which could cause delays in the manufacture and delivery of our products. In addition, failure to comply with applicable FDA requirements or later discovery of previously unknown problems with our products or manufacturing processes could result in, among other things:

43