ESTABLISHMENT LABS HOLDINGS INC. - Quarter Report: 2022 June (Form 10-Q)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

(Mark One)

☒ QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended June 30, 2022

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ___________ to ___________

Commission File Number: 001-38593

Establishment Labs Holdings Inc.

(Exact name of Registrant as specified in its charter)


British Virgin Islands						Not applicable
State or Other Jurisdiction of Incorporation or Organization						I.R.S. Employer Identification No.

Building B15 and 25 Coyol Free Zone Alajuela Costa Rica						Not applicable
Address of Principal Executive Offices						Zip Code

+506 2434 2400

Registrant’s Telephone Number, Including Area Code

Not applicable

Former Name, Former Address and Former Fiscal Year, if Changed Since Last Report

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.


Large accelerated filer ☒						Accelerated filer ☐
Non-accelerated filer ☐						Smaller reporting company ☐
Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

Securities registered pursuant to Section 12(b) of the Act:


Title of each class	Trading symbol	Name of each exchange on which registered
Common Shares, No Par Value	ESTA	The Nasdaq Capital Market

The number of the registrant’s common shares outstanding as of August 8, 2022 was 24,268,497.

TABLE OF CONTENTS


		Page
Explanatory Note		1
Special Note about Forward-Looking Statements		1
Summary of Risk Factors		2
Part I. Financial Information		4
Item 1.	Financial Statements - Unaudited	4
	Condensed Consolidated Balance Sheets as of June 30, 2022 and December 31, 2021	4
	Condensed Consolidated Statements of Operations for the Three and Six Months Ended June 30, 2022 and 2021	5
	Condensed Consolidated Statements of Comprehensive Loss for the Three and Six Months Ended June 30, 2022 and 2021	6
	Condensed Consolidated Statements of Shareholders’ Equity for the Three and Six Months Ended June 30, 2022 and 2021	7
	Condensed Consolidated Statements of Cash Flows for the Six Months Ended June 30, 2022 and 2021	9
	Notes to the Condensed Consolidated Financial Statements	11
Item 2.	Management’s Discussion and Analysis of Financial Condition and Results of Operations	36
Item 3.	Quantitative and Qualitative Disclosures About Market Risk	47
Item 4.	Controls and Procedures	47
Part II. Other Information		49
Item 1.	Legal Proceedings	49
Item 1A.	Risk Factors	49
Item 2.	Unregistered Sales of Equity Securities and Use of Proceeds	86
Item 3.	Defaults Upon Senior Securities	86
Item 4.	Mine Safety Disclosure	86
Item 5.	Other Information	86
Item 6.	Exhibits	86
Signatures		87

EXPLANATORY NOTE

In this report, unless the context indicates otherwise, the terms “Establishment Labs,” “Company,” “we”, “us” and “our” refer to Establishment Labs Holdings Inc., a British Virgin Islands entity, and its consolidated subsidiaries.

We own, or have rights to, trademarks and trade names that we use in connection with the operation of our business, including Establishment Labs and our logo as well as other brands such as Motiva Implants, SilkSurface/SmoothSilk, VelvetSurface, ProgressiveGel, TrueMonobloc, BluSeal, Divina, Ergonomix, Ergomonix2, Ergonomix2 Diamond, Mía and MotivaImagine, among others. Other trademarks and trade names appearing in this report are the property of their respective owners. Solely for your convenience, some of the trademarks and trade names referred to in this report are listed without the ® and TM symbols, but we will assert, to the fullest extent under applicable law, our rights to our trademarks and trade names.

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This report contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended or the Exchange Act. You can find many (but not all) of these statements by looking for words such as “approximates,” “believes,” “expects,” “anticipates,” “estimates,” “intends,” “plans,” “would,” “may” or other similar expressions in this report. Any statements that refer to projections of our future financial or operating performance, our liquidity and anticipated cash plans, anticipated trends in our business, our goals, strategies, focus and plans, and other characterizations of future events or circumstances, including statements expressing general optimism about future operating results, are forward-looking statements.

We claim the protection of the safe harbor contained in the Private Securities Litigation Reform Act of 1995. We caution investors that any forward-looking statements presented in this report, or that we may make orally or in writing from time to time, are expressions of our beliefs and expectations based on currently available information at the time such statements are made. Such statements are based on assumptions, and the actual outcome will be affected by known and unknown risks, trends, uncertainties and factors that are beyond our control. Although we believe that our assumptions are reasonable, they are not guarantees of future performance. As a result, our actual future results may differ from our expectations, and those differences may be material.

Factors that could cause or contribute to these differences include, among others, those risks and uncertainties discussed below under “Summary Risk Factors” and under “Part II, Item 1A. Risk Factors,” as such risk factors may be amended, updated or superseded from time to time by our subsequent filings with the Securities and Exchange Commission. The risks and uncertainties included herein are not exhaustive, and additional factors could adversely affect our business and financial performance. We operate in a very competitive and rapidly changing environment. New risk factors emerge from time to time, and it is not possible for us to predict all such risk factors, nor can we assess the impact of all such risk factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements.

We are not undertaking any obligation to update any forward-looking statements. Accordingly, investors should use caution in relying on past forward-looking statements, which speak only as of the date they are made.

SUMMARY RISK FACTORS

The following is a summary of certain key risk factors for investors in our securities. You should read this summary together with the more detailed description of risks and uncertainties discussed below under Part II, Item 1A. “Risk Factors” before investing in the Company.

•The COVID-19 pandemic has adversely affected our business and our financial results and may continue to do so for the foreseeable future.

•Unfavorable global economic conditions, including slower growth or recession, inflation or decreases in consumer spending power or confidence, could adversely affect our business, financial condition or results of operations.

•We expect to incur losses for the foreseeable future, and our ability to achieve and maintain profitability depends on the commercial success of our Motiva Implants.

•If our available cash resources and anticipated cash flow from operations are insufficient to satisfy our liquidity requirements, we may seek to sell equity or convertible debt securities, enter into a credit facility or another form of third-party funding, or seek other debt financing.

•The regulatory process is expensive, time consuming and uncertain. There is no guarantee that the United States Food and Drug Administration, or FDA, or non-U.S. regulatory agencies will grant approval for our current or future products, and failure to obtain regulatory approvals in the United States and other international jurisdictions, or revocation of approvals in those jurisdictions, will prevent us from marketing our products.

•Even if clinical trials demonstrate acceptable safety and efficacy for Motiva Implants in some patient populations, the FDA or similar regulatory authorities outside the United States may not approve the marketing of Motiva Implants or may approve it with restrictions on the label, which could have a material adverse effect on our business, financial condition, results of operations and growth prospects.

•In certain large markets, we engage in direct sales efforts. We may fail to maintain and develop our direct sales force, and our revenues and financial outcomes could suffer as a result. Furthermore, our direct sales personnel may not effectively sell our products.

•If we are unable to educate clinicians on the safe, effective and appropriate use of our products and designed surgeries, we may experience increased claims of product liability and may be unable to achieve our expected growth.

•We have a limited operating history in the United States and may face difficulties encountered by companies early in their commercialization in competitive and rapidly evolving markets.

•Our success depends, in part, on our ability to continue to enhance our existing products and services and develop or commercialize new products and services that respond to customer needs and preferences, which we expect will require us to incur significant expenses.

•Our business depends on maintaining our brand and ongoing customer demand for our products and services, and a significant reduction in sentiment or demand could affect our results of operations.

•If we fail to compete effectively against our competitors, many of whom have greater resources than we have, our revenues and results of operations may be negatively affected.

•Any disruption at our existing facilities could adversely affect our business and operating results.

•The medical technology industry is complex and intensely regulated at the federal, state, and local levels and government authorities may determine that we have failed to comply with applicable laws or regulations.

•We rely on a single-source, third-party supplier for medical-grade long-term implantable silicone, which is the primary raw material used in our Motiva Implants. If this supplier were to increase prices for this raw material over time or experience interruptions in its ability to supply us with this raw material, our business, financial condition and results of operations could be adversely affected.

•We have significant exposure to the economic and political situations in emerging market countries, and developments in these countries could materially impact our financial results, or our business more generally.

•Our results of operations could be affected by fluctuations in currency rates.

•Negative publicity concerning our products or our competitors’ products, including due to product defects and any resulting litigation, could harm our reputation and reduce demand for silicone breast implants, either of which could adversely impact our financial results and/or share price.

•Recent news coverage has called into question the long-term safety of breast implants and reports of breast implant-associated anaplastic large cell lymphoma (BIA-ALCL) linked to our competitors’ products which have led to regulatory actions regarding macrotextured devices in several countries and the worldwide recall of one of our competitor’s macrotextured implants and tissue expanders. These events may lead to a reduction in the demand for silicone breast implants and could adversely affect our business.

•The medical device industry is characterized by patent litigation and we could become subject to litigation that could be costly, result in the diversion of management's time and efforts, require us to pay damages or prevent us from marketing our existing or future products.

Table of Contents

ESTABLISHMENT LABS HOLDINGS INC.

Condensed Consolidated Balance Sheets

(In thousands, except share data)

PART I. FINANCIAL INFORMATION

ITEM 1. FINANCIAL STATEMENTS



	June 30, 2022		December 31, 2021
	(Unaudited)
Assets
Current assets:
Cash	$	91,259	$	53,415
Accounts receivable, net of allowance for doubtful accounts of $791 and $1,221	32,003		24,437
Inventory, net	26,532		28,407
Prepaid expenses and other current assets	6,634		7,012
Total current assets	156,428		113,271
Long-term assets:
Property and equipment, net of accumulated depreciation	35,359		18,658
Goodwill	465		465
Intangible assets, net of accumulated amortization	4,414		4,371

Right-of-use operating lease assets, net	2,023		2,206
Other non-current assets	1,194		558
Total assets	$	199,883	$	139,529
Liabilities and shareholders’ equity
Current liabilities:
Accounts payable	$	15,986	$	14,475
Accrued liabilities	17,600		16,236
Other liabilities, short-term	1,166		1,178
Total current liabilities	34,752		31,889
Long-term liabilities:
Note payable, Oaktree, net of debt discount and issuance costs	145,482		—
Note payable, Madryn, net of debt discount and issuance costs	—		51,906
Madryn put option	—		703
Operating lease liabilities, non-current	1,726		1,900
Other liabilities, long-term	2,056		2,392
Total liabilities	184,016		88,790
Commitments and contingencies (Note 13)
Shareholders’ equity:
Common shares - zero par value, unlimited amount authorized; 24,638,037 and 24,488,335 shares issued at June 30, 2022 and December 31, 2021, respectively; 24,229,967 and 24,080,265 shares outstanding at June 30, 2022 and December 31, 2021, respectively	221,850		219,737
Additional paid-in-capital	43,761		36,584
Treasury shares, at cost, 408,070 shares held at June 30, 2022 and December 31, 2021	(2,854)		(2,854)
Accumulated deficit	(249,424)		(206,385)
Accumulated other comprehensive income	2,534		3,657
Total shareholders’ equity	15,867		50,739
Total liabilities and shareholders’ equity	$	199,883	$	139,529

The accompanying notes are an integral part of these condensed consolidated financial statements.

Table of Contents

ESTABLISHMENT LABS HOLDINGS INC.

Condensed Consolidated Statements of Operations

(In thousands, except share and per share data)

(Unaudited)



	Three Months Ended June 30,				Six Months Ended June 30,
	2022		2021		2022		2021
Revenue	$	41,190	$	31,994	$	79,642	$	62,330
Cost of revenue	13,736		10,526		27,252		20,772
Gross profit	27,454		21,468		52,390		41,558
Operating expenses:
Sales, general and administrative	32,957		21,753		59,870		39,891
Research and development	4,903		4,349		8,501		8,397
Total operating expenses	37,860		26,102		68,371		48,288
Loss from operations	(10,406)		(4,634)		(15,981)		(6,730)
Interest income	32		4		52		8
Interest expense	(3,388)		(2,248)		(5,680)		(4,443)
Change in fair value of derivative instruments	1,099		259		703		489


Other income (expense), net	(4,860)		1,705		(2,151)		(1,021)
Loss on extinguishment of debt	(19,019)		—		(19,019)		—
Loss before income taxes	(36,542)		(4,914)		(42,076)		(11,697)
Provision for income taxes	(564)		(408)		(963)		(573)
Net loss	$	(37,106)	$	(5,322)	$	(43,039)	$	(12,270)

Basic and diluted net loss per share	$	(1.52)	$	(0.22)	$	(1.77)	$	(0.51)

Weighted average outstanding shares used for basic and diluted net loss per share	24,396,847		23,949,006		24,354,005		23,883,366

The accompanying notes are an integral part of these condensed consolidated financial statements.

ESTABLISHMENT LABS HOLDINGS INC.

Condensed Consolidated Statements of Comprehensive Loss

(In thousands)

(Unaudited)



	Three Months Ended June 30,				Six Months Ended June 30,
	2022		2021		2022		2021
Net loss	$	(37,106)	$	(5,322)	$	(43,039)	$	(12,270)
Other comprehensive income (loss):
Foreign currency translation gain (loss)	984		(1,558)		(1,123)		(617)
Other comprehensive gain (loss)	984		(1,558)		(1,123)		(617)
Comprehensive loss	$	(36,122)	$	(6,880)	$	(44,162)	$	(12,887)

The accompanying notes are an integral part of these condensed consolidated financial statements.

Table of Contents

ESTABLISHMENT LABS HOLDINGS INC.

Condensed Consolidated Statement of Shareholders’ Equity

(Unaudited) (In thousands, except share data)



	Common Shares			Treasury Shares		Additional Paid-In Capital			Accumulated Deficit		Accumulated Other Comprehensive Income		Total
	Shares	Amount			Shares			Amount












Balance at January 1, 2022	24,488,335	$	219,737		(408,070)	$	(2,854)		$	36,584	$	(206,385)	$	3,657	$	50,739


Stock option exercises	113,821	1,702			—	—			—		—		—		1,702

Share-based compensation	—	—			—	—			3,434		—		—		3,434


Foreign currency translation loss	—	—			—	—			—		—		(2,107)		(2,107)
Net loss	—	—			—	—			—		(5,933)		—		(5,933)
Balance at March 31, 2022	24,602,156	221,439			(408,070)	(2,854)			40,018		(212,318)		1,550		47,835
Stock option exercises	35,881	411			—	—			—		—		—		411
Share-based compensation	—	—			—	—			3,743		—		—		3,743

Foreign currency translation gain	—	—			—	—			—		—		984		984
Net loss	—	—			—	—			—		(37,106)		—		(37,106)
Balance at June 30, 2022	24,638,037	$	221,850		(408,070)	$	(2,854)		$	43,761	$	(249,424)	$	2,534	$	15,867

The accompanying notes are an integral part of these condensed consolidated financial statements.

Table of Contents

ESTABLISHMENT LABS HOLDINGS INC.

Condensed Consolidated Statement of Shareholders’ Equity

(Unaudited) (In thousands, except share data)



	Common Shares			Treasury Shares		Additional Paid-In Capital			Accumulated Deficit		Accumulated Other Comprehensive Income		Total
	Shares	Amount			Shares			Amount












Balance at January 1, 2021	23,925,789	$	213,471		(408,070)	$	(2,854)		$	26,717	$	(165,246)	$	2,873	$	74,961

Stock option exercises	163,034	1,882			—	—			—		—		—		1,882

Share-based compensation	5,939	6			—	—			1,750		—		—		1,756
Shares withheld to cover income tax obligation upon vesting of restricted stock	(711)	(1)			—	—			(40)		—		—		(41)
Foreign currency translation gain	—	—			—	—			—		—		941		941
Net loss	—	—			—	—			—		(6,948)		—		(6,948)
Balance at March 31, 2021	24,094,051	215,358			(408,070)	(2,854)			28,427		(172,194)		3,814		72,551
Stock option exercises	36,750	635			—	—			—		—		—		635

Share-based compensation	3,126	3			—	—			2,554		—		—		2,557
Shares withheld to cover income tax obligation upon vesting of restricted stock	(474)	—			—	—			(34)		—		—		(34)
Foreign currency translation loss	—	—			—	—			—		—		(1,558)		(1,558)
Net loss	—	—			—	—			—		(5,322)		—		(5,322)
Balance at June 30, 2021	24,133,453	$	215,996		(408,070)	$	(2,854)		$	30,947	$	(177,516)	$	2,256	$	68,829

The accompanying notes are an integral part of these condensed consolidated financial statements.

Table of Contents

ESTABLISHMENT LABS HOLDINGS INC.

Condensed Consolidated Statements of Cash Flows

(In thousands)

(Unaudited)



	Six Months Ended June 30,
	2022		2021
Cash flows from operating activities:
Net loss	$	(43,039)	$	(12,270)
Adjustments to reconcile net loss to net cash used in operating activities:
Depreciation and amortization	1,903		1,844
Provision for doubtful accounts	156		122
Provision for inventory obsolescence	1,270		(23)
Share-based compensation	7,177		4,313
Loss from disposal of property and equipment	80		63
Unrealized foreign currency (gain)/ loss, net	2,035		89
Amortization of right-to-use asset	187		204
Loss on extinguishment of debt	19,019		—
Change in fair value of derivative instruments	(703)		(489)

Non-cash interest expense and amortization of debt discount	2,645		979
Changes in operating assets and liabilities:
Accounts receivable	(9,018)		(4,374)
Inventory	(964)		(1,077)
Prepaid expenses and other current assets	912		1,123
Other assets	(656)		41
Accounts payable	1,379		306
Accrued liabilities	1,614		2,213
Operating lease liabilities	(181)		(212)
Other liabilities	14		(220)
Net cash used in operating activities	(16,170)		(7,368)
Cash flows from investing activities:
Purchases of property and equipment	(1,405)		(1,704)
Cash used in asset acquisitions	(525)		(434)
Cost incurred for intangible assets	(656)		(327)
Capital expenditures on construction in progress	(16,967)		—
Net cash used in investing activities	(19,553)		(2,465)
Cash flows from financing activities:
Borrowings under Oaktree debt agreement, net of debt discount and issuance costs	143,593		—
Repayment of Madryn debt agreement	(71,681)		—




Repayments on finance leases	(12)		(132)




Proceeds from stock option exercises	2,113		2,415

Tax payments related to shares withheld upon vesting of restricted stock	—		(75)
Net cash provided by financing activities	74,013		2,208
Effect of exchange rate changes on cash	(446)		(92)
Net increase (decrease) in cash	37,844		(7,717)
Cash at beginning of period	53,415		84,523
Cash at end of period	$	91,259	$	76,806

The accompanying notes are an integral part of these condensed consolidated financial statements.

Table of Contents

ESTABLISHMENT LABS HOLDINGS INC.

Condensed Consolidated Statements of Cash Flows

(In thousands)

(Unaudited)



	Six Months Ended June 30,
	2022		2021


Supplemental disclosures:
Cash paid for interest	$	3,013	$	3,437
Cash paid for income taxes	$	845	$	314

Supplemental disclosures of non-cash investing and financing activities:
Unpaid balance for property and equipment	$	37	$	68





Consideration payable related to asset acquisition	$	—	$	416
Cashless option exercise	$	—	$	102

The accompanying notes are an integral part of these condensed consolidated financial statements.

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

1. Formation and Business of the Company

Establishment Labs Holdings Inc. and its wholly owned subsidiaries (collectively “the Company”) is a global company that manufactures and markets innovative medical devices for aesthetic and reconstructive plastic surgery. The Company was established in the British Virgin Islands on October 9, 2013, at which time Establishment Labs, S.A., the Costa Rican manufacturing company, was reincorporated as a wholly-owned subsidiary. As of June 30, 2022, the Company also has wholly-owned subsidiaries in the United States (JAMM Technologies, Inc. and Motiva USA LLC), Brazil (Establishment Labs Produtos para Saude Ltda), Belgium (European Distribution Center Motiva BVBA), France (Motiva Implants France SAS), Sweden (Motiva Nordica AB), Switzerland (JEN-Vault AG), the United Kingdom (Motiva Implants UK Limited), Italy (Motiva Italy S.R.L), Spain (Motiva Implants Spain, S.L.), Austria (Motiva Austria GmbH), Germany (Motiva Germany GmbH) and Argentina (Motiva Argentina S.R.L). Substantially all of the Company’s revenues are derived from the sale of silicone gel-filled breast implants, branded as Motiva Implants.

The main manufacturing activities are conducted at two manufacturing facilities in Costa Rica. In 2010, the Company began operating under the Costa Rica free zone regime (Régimen de Zona Franca), which provides for reduced income tax and other tax obligations pursuant to an agreement with the Costa Rican authorities.

The Company’s products are approved for sale in Europe, the Middle East, Latin America, and Asia. The Company sells its products internationally through a combination of distributors and direct sales to customers.

The Company is pursuing regulatory approval to commercialize its products in the United States. The Company received approval for an investigational device exemption, or IDE, from the United States Food and Drug Administration, or FDA, in March 2018 to initiate a clinical trial in the United States for its Motiva Implants. In August 2019, the Company completed all patient surgeries for the IDE aesthetic cohorts, which include primary augmentation and revision. In the fourth quarter of 2021, the Company initiated a modular pre-market approval, or PMA, submission process with the FDA and submitted the first of four expected modules. In April 2022, the Company released preliminary results of the two-year patient follow-up data for the primary augmentation cohort of its IDE clinical trial. The second module was submitted in May 2022. In June 2022, the Company completed the enrollment of all subjects in the remaining reconstruction cohort. As of June 30, 2022, full enrollment of the IDE clinical trial is complete, and all surgeries in the primary reconstruction cohort were completed.

2. Summary of Significant Accounting Policies

There have been no material changes to the Company’s significant accounting policies during the six months ended June 30, 2022 as compared to the significant accounting policies described in Note 2 of the “Notes to Consolidated Financial Statements” in the Company’s audited consolidated financial statements as of December 31, 2021 and 2020 and for the years ended 2021, 2020 and 2019 presented in the Company’s Form 10-K filed with the Securities and Exchange Commission, or SEC, on March 1, 2022. Below are those policies with current period updates.

Basis of Presentation and Consolidation

The accompanying condensed consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America, or GAAP, and the applicable rules and regulations of the SEC for interim financial information. Accordingly, they do not include all of the information and notes required by GAAP for complete financial statements.

The accompanying condensed consolidated financial statements and related financial information should be read in conjunction with the audited consolidated financial statements and the related notes thereto for the years ended December 31, 2021, 2020 and 2019 presented in the Company’s Form 10-K filed with the SEC on March 1, 2022.

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

The condensed consolidated financial statements include the Company’s accounts and those of its wholly owned subsidiaries as of June 30, 2022 as follows:



Subsidiary			Incorporation/Acquisition Date
Establishment Labs, S.A. (Costa Rica)			January 18, 2004
Motiva USA, LLC (USA)			February 20, 2014
JAMM Technologies, Inc. (USA)			October 27, 2015
Establishment Labs Produtos par Saude Ltda (Brazil)			January 4, 2016
European Distribution Center Motiva BVBA (Belgium)			March 4, 2016
Motiva Implants France SAS (France)			September 12, 2016
JEN-Vault AG (Switzerland)			November 22, 2016
Motiva Nordica AB (Sweden)			November 2, 2017
Motiva Implants UK Limited (the United Kingdom)			July 31, 2018
Motiva Italy S.R.L (Italy)			July 31, 2018
Motiva Implants Spain, S.L. (Spain)			January 3, 2019
Motiva Austria GmbH (Austria)			January 14, 2019
Motiva Germany GmbH (Germany)			August 1, 2019
Motiva Argentina S.R.L (Argentina)			February 7, 2020

All intercompany accounts and transactions have been eliminated in consolidation.

Unaudited Interim Condensed Consolidated Financial Information

The accompanying interim condensed consolidated financial statements as of June 30, 2022 and for the three and six months ended June 30, 2022 and 2021, and the related interim information contained within the notes to the condensed consolidated financial statements, are unaudited. The unaudited interim condensed consolidated financial statements have been prepared in accordance with GAAP and on the same basis as the audited consolidated financial statements. In the opinion of management, the accompanying unaudited interim condensed consolidated financial statements contain all adjustments which are necessary to state fairly the Company’s financial position as of June 30, 2022, and the results of its operations and cash flows for the six months ended June 30, 2022 and 2021. Such adjustments are of a normal and recurring nature. The results for the three and six months ended June 30, 2022 are not necessarily indicative of the results to be expected for the full fiscal year 2022, or for any future period.

Segments

The chief operating decision maker for the Company is the Chief Executive Officer. The Chief Executive Officer reviews financial information presented on a consolidated basis, accompanied by information about revenue by geographic region, for purposes of allocating resources and evaluating financial performance. The Company has one business activity and there are no segment managers who are held accountable for operations, operating results or plans for levels or components below the consolidated unit level. Accordingly, the Company has determined that it has a single reportable and operating segment structure. The Company and its Chief Executive Officer evaluate performance based primarily on revenue in the geographic regions in which the Company operates.

Geographic Concentrations

The Company derives all its revenues from sales to customers in Europe, the Middle East, Latin America, and Asia, and has not yet received approval to sell its products in the United States.

For the six months ended June 30, 2022 and 2021, Brazil accounted for 16.9% and 9.1%, respectively, of consolidated revenue and no other individual country exceeded 10% of consolidated revenue, on a ship-to

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

destination basis.

The majority of the Company’s consolidated total assets, including cash and tangible assets, is held in the United States. The Company’s long-lived assets, which primarily consist of property and equipment and intangible assets located in Costa Rica represented 92% and 84% of the total long-lived assets as of June 30, 2022 and December 31, 2021, respectively.

Use of Estimates

The preparation of financial statements in accordance with GAAP requires management to make estimates and assumptions that affect the amounts reported in the condensed consolidated financial statements and accompanying notes. Significant accounting estimates and management judgments reflected in the condensed consolidated financial statements include items such as accounts receivable valuation and allowances, inventory valuation and allowances, valuation of acquired intangible assets, valuation of derivatives and valuation of deferred income tax assets, including tax valuation allowances. Estimates are based on historical experience, where applicable, and other assumptions believed to be reasonable by management. Actual results may differ from those estimates under different assumptions or conditions.

Concentration of Credit Risk and Other Risks and Uncertainties

Financial instruments that potentially subject the Company to a concentration of credit risk consist principally of cash and accounts receivable. The majority of the Company’s cash is held at two financial institutions in the United States. Balances in the Company’s cash accounts exceed the Federal Deposit Insurance Corporation, or FDIC, limit of $250,000. The Company has not experienced any losses to its deposits of cash.

All of the Company’s revenue has been derived from sales of its products in international markets, principally Europe, the Middle East, Latin America, and Asia. In the international markets in which the Company operates, the Company uses a combination of distributors and makes direct sales to customers. The Company performs ongoing credit evaluations of its distributors and customers, does not require collateral, and maintains allowances for potential credit losses on customer accounts when deemed necessary.

Substantially all of the Company’s revenues were derived from the sale of Motiva Implants. During the six months ended June 30, 2022 and 2021, no customer accounted for more than 10% of the Company’s revenue. No customers accounted for more than 10% of the Company’s trade accounts receivable balance as of June 30, 2022. One customer accounted for 11.8% of the Company’s trade accounts receivable balance as of December 31, 2021.

The Company relies on NuSil Technology, LLC, or NuSil, as the sole supplier of medical-grade silicone used in Motiva Implants. During the six months ended June 30, 2022 and 2021, the Company had purchases of $15.3 million, or 27.8% of total purchases, and $10.5 million, or 58.6% of total purchases, respectively, from NuSil. As of June 30, 2022 and December 31, 2021, the Company had an outstanding balance owed to this vendor of $2.6 million and $2.5 million, respectively.

The Company’s future results of operations involve a number of risks and uncertainties. Factors that could affect the Company’s future operating results and cause actual results to vary materially from expectations include, but are not limited to, unfavorable economic conditions, uncertainty of regulatory approval of the Company’s current and potential future products, uncertainty of market acceptance of the Company’s products, competition from substitute products and larger companies, securing and protecting proprietary technology, access to capital, strategic relationships and dependence on key individuals and sole source suppliers.

Products developed by the Company require clearances from the FDA or other international regulatory agencies prior to commercial sales. There can be no assurance that the products will receive the necessary clearances. If the Company is denied clearance, clearance is delayed, or the Company is unable to maintain its existing clearances, these developments could have a material adverse impact on the Company.

Cash

The Company’s cash consists of cash maintained in checking and interest-bearing accounts. The majority of the Company’s cash is held at two financial institutions in the United States. The Company accounts for financial instruments with original maturities of three months or less at the date of purchase as cash equivalents. The

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

Company held no cash equivalents as of June 30, 2022 or December 31, 2021.

Accounts Receivable and Allowance for Doubtful Accounts

Accounts receivable is stated at invoice value less estimated allowances for returns and doubtful accounts. The Company continually monitors customer payments and maintains an allowance for estimated losses resulting from customers’ inability to make required payments. In evaluating the Company’s ability to collect outstanding receivable balances, the Company considers various factors including the age of the balance, the creditworthiness of the customer, which is assessed based on ongoing credit evaluations and payment history, and the customer’s current financial condition. In cases where there are circumstances that may impair a specific customer’s ability to meet its financial obligations, an allowance is recorded against amounts due, which reduces the net recognized receivable to the amount reasonably believed to be collectible.

Inventory and Cost of Revenue

Inventory is stated at the lower of cost to purchase or manufacture the inventory or the net realizable value of such inventory. Cost is determined using the standard cost method which approximates actual costs using the first-in, first-out basis. The Company regularly reviews inventory quantities considering actual losses, projected future demand, and remaining shelf life to record a provision for excess and slow-moving inventory. An inventory reserve of $2.3 million and $1.2 million has been recorded as of June 30, 2022 and December 31, 2021, respectively.

The Company recognizes the cost of inventory transferred to the customer in cost of revenue when revenue is recognized.

Leases

The Company determines if an arrangement is, or contains, a lease at the inception date of the contract. The Company has elected an expedient to account for each separate lease component and its associated non-lease components as a single lease component for the majority of its asset classes.

The lease term may include periods covered by options to extend or terminate the lease when it is reasonably certain that the Company will exercise a renewal option, or reasonably certain it will not exercise an early termination option. The Company recognizes lease liabilities and right-of-use, or ROU, assets upon commencement for all material leases with a term greater than 12 months. The Company has elected an expedient not to recognize leases with a lease term of 12 months or less on the balance sheet. These short-term leases are expensed on a straight-line basis over the lease term.

Shipping and Handling Costs

Shipping and handling costs are expensed as incurred and are included in selling, general and administrative, or SG&A, expenses. For the three months ended June 30, 2022 and 2021, shipping and handling costs were $1.7 million and $1.6 million, respectively. For the six months ended June 30, 2022 and 2021, shipping and handling costs were $3.1 million and $2.8 million, respectively.

Revenue Recognition

The Company recognizes revenue related to sales of products to distributors or directly to customers in markets where it has regulatory approval, net of discounts and allowances. The Company recognizes revenue in accordance with Accounting Standards Codification, or ASC, Revenue from Contracts with Customers (Topic 606). ASC 606 requires the Company to recognize revenue to depict the transfer of goods or services to a customer at an amount that reflects the consideration it expects to receive in exchange for those goods or services.

The Company recognizes revenue related to the sales of products to distributors at the time of shipment of the product, which represents the point in time when the distributor has taken ownership and assumed the risk of loss, and the required revenue recognition criteria are satisfied. The Company’s distributors are obligated to pay within specified terms regardless of when, or if, they sell the products. The Company’s contracts with distributors typically do not contain right of return or price protection and have no post-delivery obligations.

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

The Company recognizes revenue when title to the product and risk of loss transfer to customers, provided there are no remaining performance obligations required of the Company or any written matters requiring customer acceptance. The Company allows for the return of product from direct customers in certain regions in limited instances within fifteen days after the original sale and records estimated sales returns as a reduction of sales in the same period revenue is recognized. Appropriate reserves are established for anticipated sales returns based on historical experience, recent gross sales and any notification of pending returns. Actual sales returns in any future period are inherently uncertain and thus may differ from the estimates. If actual sales returns differ significantly from the estimates, an adjustment to revenue in the current or subsequent period is recorded. As of June 30, 2022 and December 31, 2021, an allowance of $13,000 and $10,000 was recorded for product returns, respectively.

A portion of the Company’s revenue is generated from the sale of consigned inventory maintained at physician, hospital, or clinic locations. For these products, revenue is recognized at the time the Company is notified by the consignee that the product has been implanted, not when the consigned products are delivered to the consignee’s warehouse.

Revenue was generated in these primary geographic markets:



	Three Months Ended June 30,				Six Months Ended June 30,
	2022		2021		2022		2021
	(in thousands)
Europe	$	13,366	$	14,525	$	27,705	$	27,219
Latin America	14,182		7,170		26,367		15,171
Asia-Pacific/Middle East	13,410		9,730		25,030		19,225
Other	232		569		540		715
	$	41,190	$	31,994	$	79,642	$	62,330

The Company has a limited warranty for the shelf life of breast implants, which is five years from the time of manufacture. Estimated warranty obligations are recorded at the time of sale. The Company also offers a warranty to patients in the event of rupture and a replacement program for capsular contracture events, provided certain registration requirements are met. Revenue for extended warranties is recognized ratably over the term of the agreement. To date, these warranty and program costs have been de minimis. The Company will continue to evaluate the warranty reserve policies for adequacy considering claims history.

Deferred revenue primarily consists of payments received in advance of meeting revenue recognition criteria. The Company has received payments from distributors to provide distribution exclusivity within a geographic area and recognizes deferred revenue on a ratable basis over the term of such contractual distribution relationship. Additionally, the Company has received payments from customers in direct markets prior to surgical implantation and recognizes deferred revenue at the time the Company is notified by the customer that the product has been implanted. For all arrangements, any revenue that has been deferred and is expected to be recognized beyond one year is classified as long-term deferred revenue and included in “Other liabilities, long-term” on the condensed consolidated balance sheets (see Note 3).

Research and Development

Costs related to research and development, or R&D, activities are expensed as incurred. R&D costs primarily include personnel costs, materials, clinical expenses, regulatory expenses, product development, consulting services, and outside research activities, all of which are directly related to research and development activities.

The Company estimates IDE clinical trial expenses based on the services performed, pursuant to contracts with research institutions and clinical research organizations that conduct and manage clinical trials on its behalf. In accruing service fees, the Company estimates the time period over which services will be performed and the level

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

of patient enrollment and activity expended in each period. If the actual timing of the performance of services or the level of effort varies from the estimate, the Company will adjust the accrual accordingly.

Selling, General and Administrative Expenses

SG&A expenses include sales and marketing costs, payroll and related benefit costs, insurance expenses, shipping and handling costs, legal and professional fees and administrative overhead.

Property and Equipment

Property and equipment are stated at cost less accumulated depreciation and amortization.

Following the exercise of its option to purchase its manufacturing facility in June 2019, the Company depreciates the owned building on a straight-line basis over 50 years of useful life. Depreciation of property and equipment is computed using the straight-line method over the assets’ estimated useful lives of five to ten years. Leasehold improvements are amortized on a straight-line basis over the shorter of the estimated useful life of the asset or the remaining lease term after factoring expected renewal periods. Upon retirement or disposal of assets, the costs and related accumulated depreciation are eliminated from the accounts and any gain or loss is recognized in operations. Maintenance and repairs are expensed as incurred. Substantially all of the Company’s manufacturing operations and related property and equipment is located in Costa Rica.

Goodwill and Intangible Assets

The Company records the excess of the acquisition purchase price over the net fair value of the tangible and identifiable intangible assets acquired and liabilities assumed as goodwill. In accordance with ASC 350, Intangibles - Goodwill and Other, the Company tests goodwill for impairment annually during the fourth quarter of each year and whenever events or changes in circumstances indicate that the carrying value of the asset may not be recoverable. In connection with the annual impairment test for goodwill, the Company elected the option to perform a qualitative assessment to determine whether it is more likely than not that the fair value of the reporting unit is less than its carrying amount. If the Company determines that it was more likely than not that the fair value of the reporting unit is less than its carrying amount, then the impairment test is performed.

Consistent with the Company's assessment that it has only one reporting segment, the Company has determined that it has only one reporting unit and tests goodwill for impairment at the entity level using the two-step process required by ASC 350. In the first step, the Company compares the carrying amount of the reporting unit to the fair value of the enterprise. If the fair value of the enterprise exceeds the carrying value, goodwill is not considered impaired and no further testing is required. If the carrying value of the enterprise exceeds the fair value, goodwill is potentially impaired, and the second step of the impairment test must be performed. In the second step, the Company compares the implied fair value of the goodwill, as defined by ASC 350, to its carrying amount to determine the impairment loss, if any.

The Company capitalizes certain costs related to intangible assets, such as patents, trademarks and software development costs. The Company follows the provisions of ASC 350-40, Internal Use Software for determining whether computer software is internal-use software and on accounting for the proceeds of computer software originally developed or obtained for internal use. The Company expenses all costs incurred during the preliminary project stage of software development and capitalizes the costs incurred during the application development stage. Costs incurred relating to upgrades and enhancements to the software are capitalized if it is determined that these upgrades or enhancements add additional functionality to the software. Costs incurred to improve and support products after they become available are charged to expense as incurred.

The Company records purchased intangible assets at their respective estimated fair values at the date of acquisition. Purchased finite-lived intangible assets are being amortized using the straight-line method over their remaining estimated useful lives, which range from two to fifteen years. The Company evaluates the remaining useful lives of intangible assets on a periodic basis to determine whether events or circumstances warrant a revision to the remaining estimated amortization period. The Company tests indefinite-lived intangible assets for impairment on at least an annual basis and whenever circumstances suggest the assets may be impaired. If indicators of impairment are present, the Company evaluates the carrying value of the intangible assets in relation to estimates of future undiscounted cash flows. The Company also evaluates the remaining useful life of an indefinite-lived intangible asset to determine whether events and circumstances continue to support an indefinite

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

useful life.

During the year ended December 31, 2021, there was no impairment of goodwill or intangible assets based on the qualitative assessments performed by the Company. As of June 30, 2022, no triggering events have occurred which would indicate that the acquired intangible asset values may not be recoverable.

Long-Lived Assets

The Company reviews long-lived assets for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset might not be recoverable. When such an event occurs, management determines whether there has been impairment by comparing the anticipated undiscounted future net cash flows to the related asset group’s carrying value. If an asset is considered impaired, the asset is written down to fair value, which is determined based either on discounted cash flows or appraised value, depending on the nature of the asset. There were no impairment charges, or changes in estimated useful lives recorded during the year ended December 31, 2021. As of June 30, 2022, no triggering events have occurred which would indicate that the acquired long-lived asset values may not be recoverable.

Debt and Embedded Derivatives

The Company applies the accounting standards for derivatives and for distinguishing liabilities from equity when accounting for hybrid contracts. The Company accounts for convertible debt instruments when the Company has determined that the embedded conversion options should not be bifurcated from their host instruments in accordance with ASC 470-20 Debt with Conversion and Other Options (see Note 6).

Prior to the extinguishment of debt outstanding under the Madryn Credit Agreement (as defined below), the Company used option pricing valuation models to determine the fair value of embedded derivatives and recorded any change in fair value as a component of other income or expense in the condensed consolidated statements of operations (see Note 5).

Debt Issuance Costs and Debt Discounts

Costs incurred in connection with the issuance of new debt are capitalized. Capitalizable debt issuance costs paid to third parties and debt discounts, net of amortization, are recorded as a reduction to the long-term debt balance on the condensed consolidated balance sheets. Amortization expense on capitalized debt issuance costs and debt discounts related to loans are calculated using the effective interest method over the term of the loan commitment and is recorded as interest expense in the condensed consolidated statements of operations.

Income Taxes

The Company records income taxes using the asset and liability method, which requires the recognition of deferred tax assets and liabilities for the expected future tax consequences of events that have been recognized in the Company’s consolidated financial statements or income tax returns. In estimating future tax consequences, expected future events, enactments or changes in the tax law or rates are considered. Valuation allowances are provided when necessary to reduce deferred tax assets to the amount expected to be realized.

The Company operates in various tax jurisdictions and is subject to audit by various tax authorities.

The Company records uncertain tax positions based on a two-step process whereby (1) a determination is made as to whether it is more likely than not that the tax positions will be sustained based on the technical merits of the position and (2) for those tax positions that meet the more-likely-than-not recognition threshold the Company recognizes the largest amount of tax benefit that is greater than 50% likely to be realized upon ultimate settlement with the related tax authority. The Company’s policy is to recognize interest and penalties accrued on any unrecognized tax benefits as a component of income tax expense. Significant judgment is required in the identification of uncertain tax positions and in the estimation of penalties and interest on uncertain tax positions.

There were no material uncertain tax positions in fiscal 2021 or for the six months ended June 30, 2022.

Foreign Currency

The financial statements of the Company’s foreign subsidiaries whose functional currencies are the local currencies are translated into U.S. dollars for consolidation as follows: assets and liabilities at the exchange rate

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

as of the balance sheet date, stockholders’ equity at the historical rates of exchange, and income and expense amounts at the average exchange rate for the period. Translation adjustments resulting from the translation of the subsidiaries’ accounts are included in “Accumulated other comprehensive income” as equity in the condensed consolidated balance sheet. Transactions denominated in currencies other than the applicable functional currency are converted to the functional currency at the exchange rate on the transaction date. At period end, monetary assets and liabilities are remeasured to the functional currency using exchange rates in effect at the balance sheet date. Non-monetary assets and liabilities are remeasured at historical exchange rates. Gains and losses resulting from foreign currency transactions are included within “Other income (expense), net” in the condensed consolidated statements of operations. For the three months ended June 30, 2022, foreign currency transaction loss amounted to $4.8 million compared to a foreign currency transaction gain of $2.0 million for the three months ended June 30, 2021. For the six months ended June 30, 2022, foreign currency transaction loss amounted to $2.1 million compared to a foreign currency transaction loss of $0.6 million for the six months ended June 30, 2021.

Comprehensive Loss

The Company’s comprehensive loss consists of net loss and foreign currency translation adjustments arising from the consolidation of the Company’s foreign subsidiaries.

Share-Based Compensation

The Company measures and recognizes compensation expense for all share-based awards in accordance with the provisions of ASC 718, Stock Compensation. Share-based awards granted include stock options, restricted stock units, or RSUs, and restricted stock awards, or RSAs. Share-based compensation expense for stock options and restricted stock granted to employees is measured at the grant date based on the fair value of the awards and is recognized as an expense ratably on a straight-line basis over the requisite service period. The fair value of options to purchase shares granted to employees is estimated on the grant date using the Black-Scholes option valuation model.

The calculation of share-based compensation expense requires the Company to make assumptions and judgments about the variables used in the Black-Scholes model, including the expected term, expected volatility of the underlying common shares, risk-free interest rate and dividends.

Net Income (Loss) Per Share

Basic net income (loss) per share is calculated by dividing the net income (loss) attributable to shareholders by the weighted-average number of shares outstanding during the period, without consideration for potentially dilutive securities. Diluted net income (loss) per share is computed by dividing the net income (loss) by the weighted-average number of shares and potentially dilutive securities outstanding for the period. For purposes of the diluted net loss per share calculation, any shares issuable upon exercise of warrants, stock options and non-vested RSUs or RSAs outstanding under the Company’s equity plan are potentially dilutive securities. Diluted net loss per share is the same as basic net loss per share for periods where the Company reported a net loss because including the dilutive securities would be anti-dilutive.

Recent Accounting Standards

Periodically, new accounting pronouncements are issued by the Financial Accounting Standards Board, or FASB, or other standard setting bodies and adopted by the Company as of the specified effective date. Unless otherwise discussed, the impact of recently issued standards that are not yet effective will not have a material impact on the Company’s consolidated financial statements upon adoption.

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

The following recent accounting pronouncements issued by the FASB could have a material effect on the Company’s financial statements:

Recently Adopted Accounting Standards

In August 2020, the FASB issued Accounting Standards Update, or ASU, No. 2020-06, Debt with Conversion and other Options (Subtopic 470-20) and Derivatives and Hedging - Contracts in Entity’s Own Equity (Subtopic 815-40). The new guidance eliminates the beneficial conversion and cash conversion accounting models for convertible instruments. It also amends the accounting for certain contracts in an entity’s own equity that are currently accounted for as derivatives because of specific settlement provisions. In addition, the new guidance modifies how particular convertible instruments and certain contracts that may be settled in cash or shares impact the diluted EPS computation. This standard is currently effective. The Company adopted ASU 2019-12 as of January 1, 2022. The adoption did not have a material impact upon the Company’s financial position and results of operations.

3. Balance Sheet Accounts

Inventory, Net



	June 30, 2022		December 31, 2021

	(in thousands)
Raw materials	$	7,597	$	8,519
Work in process	1,482		1,396
Finished goods	17,453		18,492
	$	26,532	$	28,407

As of June 30, 2022 and December 31, 2021, $3.8 million and $3.5 million of inventory was on consignment, respectively.

Property and Equipment, Net



	June 30, 2022		December 31, 2021

	(in thousands)
Machinery and equipment	$	10,485	$	10,240
Construction in process	20,141		3,174
Building improvements	6,851		6,713
Furniture and fixtures	5,229		4,761
Building	2,472		2,472
Leasehold improvements	2,170		2,118
Land	802		802
Vehicles	272		268

Total	48,422		30,548
Less: Accumulated depreciation and amortization	(13,063)		(11,890)
	$	35,359	$	18,658

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

For each of the three months ended June 30, 2022 and 2021, depreciation and amortization expense related to property and equipment was $0.6 million. For the six months ended June 30, 2022 and 2021, depreciation and amortization expense related to property and equipment was $1.3 million and $1.2 million, respectively.

The Company entered into finance leases relating to equipment and vehicles and recorded the fair value of the lease payments on the initial contract date and is amortizing the assets over the term of the leases. As of each of June 30, 2022 and December 31, 2021 the gross asset value for finance lease assets was $1.4 million. Depreciation expense for assets under finance leases was $24,000 and $32,000 for the three months ended June 30, 2022 and 2021, respectively. Depreciation expense for assets under finance leases was $48,000 and $67,000 for the six months ended June 30, 2022 and 2021, respectively.

In August 2021, the Company entered into a contract with the Zona Franca Coyol, S.A., or CFZ, to begin construction of a new manufacturing facility in Costa Rica. The costs for improvement of the land and construction of a cold shell building are being paid for by CFZ while the Company is paying for internal improvements and customization. Upon completion, the Company had the option to purchase the title to the land and cold shell building for approximately $12.6 million or to lease the facility at a to be determined price. Subject to purchase of the land and cold shell building, the Company has the option to buy an adjacent lot of land for approximately $2.8 million and engage CFZ to construct an additional manufacturing facility. On May 26, 2022, the Company exercised its option to purchase the title of the land and cold shell building and made its first payment of approximately $9.5 million in connection with the exercise of this option. The remaining approximately $3.1 million payment is expected to be made before the end of fiscal year 2022.

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

Accrued Liabilities

Accrued liabilities consisted of the following:




	June 30, 2022		December 31, 2021

	(in thousands)
Performance bonus	$	2,551	$	3,346
Payroll and related expenses	4,874		3,904
Bonus feature of stock option grants	6,366		5,570

Operating lease liabilities - current	396		402
Commissions	711		1,138
Professional and legal services	1,680		819

Warranty reserve	171		167
Cash payable for asset acquisitions - contingent consideration	—		137
Other	851		753
	$	17,600	$	16,236

Other Liabilities, Short-Term

Other liabilities, short-term consisted of the following:




	June 30, 2022		December 31, 2021

	(in thousands)

Deferred revenue	$	1,166	$	769
Cash payable for asset acquisitions	—		409
	$	1,166	$	1,178

Other Liabilities, Long-Term

Other liabilities, long-term consisted of the following:




	June 30, 2022		December 31, 2021

	(in thousands)
Deferred revenue	$	2,056	$	2,392

4. Goodwill and Other Intangible Assets

Goodwill represents the excess of the purchase price over the fair value of the net tangible and identifiable intangible assets acquired in a business combination. Intangible assets resulting from the acquisitions of entities accounted for using the acquisition method of accounting are recorded at the estimated fair value of the assets acquired. Purchased intangibles include certain patents and license rights, 510(k) authorization by the FDA to sell a medical device and other intangible assets.

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

The Company’s goodwill and most intangibles at June 30, 2022 are the result of previous asset and business acquisitions. Finite-lived intangibles are amortized over their estimated useful lives based on expected future benefit.

In addition to the intangibles acquired, the Company capitalized certain patent and license rights as identified intangibles based on patent and license rights agreements entered into over the past several years. Additionally, the Company capitalized certain software development costs.

There were no changes in the carrying amount of goodwill during the six months ended June 30, 2022:



	Balance as of January 1, 2022		Additions		Accumulated Impairment Losses		Balance as of June 30, 2022

	(in thousands)
Goodwill	$	465	$	—	$	—	$	465

The carrying amounts of these intangible assets other than goodwill as of June 30, 2022 were as follows:



	Gross Carrying Amount		Accumulated Amortization		Net Carrying Amount		Estimated Useful Lives

	(in thousands)						(in years)
Patents and license rights	$	1,757	$	(1,232)	$	525	7-12
Customer relationships	2,033		(1,901)		132		4-10
510(k) authorization	567		(251)		316		15
Developed technology	62		(55)		7		10
Capitalized software development costs	4,275		(1,170)		3,105		2-5
Other	75		(37)		38		2-5
Capitalized patents and license rights not yet amortized	291		—		291
	$	9,060	$	(4,646)	$	4,414

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

The carrying amounts of intangible assets other than goodwill as of December 31, 2021 were as follows:



	Gross Carrying Amount		Accumulated Amortization		Net Carrying Amount		Estimated Useful Lives

	(in thousands)						(in years)
Patents and license rights	$	1,736	$	(1,136)	$	600	7-12
Customer relationships	2,033		(1,799)		234		4-10
510(k) authorization	567		(232)		335		15
Developed technology	62		(52)		10		10
Capitalized software development costs	3,648		(791)		2,857		2-5
Other	75		(31)		44		2-5
Capitalized patents and license rights not yet amortized	291		—		291
	$	8,412	$	(4,041)	$	4,371

For each of the three months ended June 30, 2022 and 2021, amortization expense related to intangible assets was $0.3 million. The amortization expense associated with intangible assets was $0.6 million for each of the six months ended June 30, 2022 and 2021. Non-product related amortization is recorded in SG&A while product related amortization is recorded in cost of revenue.

As of June 30, 2022, the amortization expense related to identifiable intangible assets, with definite useful lives, in future periods is expected to be as follows:



Year Ending December 31,	(in thousands)
2022 (remaining)	$	608
2023	984
2024	910
2025	742
2026	456
Thereafter	423
Total	$	4,123

The Company evaluates the recoverability of goodwill and indefinite-lived intangible assets annually and whenever events or changes in circumstances indicate that the carrying amount may not be recoverable. During the year ended December 31, 2021, there was no impairment of goodwill or intangible assets based on the qualitative assessments performed by the Company. As of June 30, 2022, no triggering events have occurred which would indicate that the acquired intangible asset values may not be recoverable.

5. Fair Value Measurements

The carrying value of the Company’s cash, accounts receivable and accounts payable approximate fair value due to the short-term nature of these items. Embedded derivatives that qualify for liability treatment are carried at fair value and re-measured at each reporting period.

Fair value is defined as the exchange price that would be received for an asset or an exit price paid to transfer a liability in the principal or most advantageous market for the asset or liability in an orderly transaction between

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

market participants on the measurement date. Valuation techniques used to measure fair value must maximize the use of observable inputs and minimize the use of unobservable inputs.

The fair value hierarchy defines a three-level valuation hierarchy for disclosure of fair value measurements as follows:

•Level I Unadjusted quoted prices in active markets for identical assets or liabilities;

•Level II Inputs other than quoted prices included within Level I that are observable, unadjusted quoted prices in markets that are not active, or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the related assets or liabilities; and

•Level III Unobservable inputs that are supported by little or no market activity for the related assets or liabilities.

The categorization of a financial instrument within the valuation hierarchy is based upon the lowest level of input that is significant to the fair value measurement.

The following table sets forth the Company’s financial instruments that were measured at fair value on a recurring basis by level within the fair value hierarchy at period end:

Fair Value Measurements at June 30, 2022

Total

Level 1

Level 2

Level 3

(in thousands)

Liabilities

Madryn put option liability

—



	Fair Value Measurements at December 31, 2021
	Total		Level 1		Level 2		Level 3

	(in thousands)
Liabilities
Madryn put option liability	$	703	$	—	$	—	$	703

The fair value measurement of derivatives is based on significant inputs not observed in the market and thus represents a Level 3 measurement.

In August 2017, the Company entered into a credit agreement, or the Madryn Credit Agreement, with Madryn Health Partners, LP, or Madryn, as administrative agent, and a syndicate of lenders (see Note 6). The Company determined that the Madryn Credit Agreement contained put options related to early redemption mandatory prepayment terms in case of change in control or an event of default and a call option related to voluntary repayment option. The Company allocated a fair value of $15.1 million for these identified embedded derivatives as a debt discount on the original commitment date. An additional $5.0 million and $1.6 million debt discount was recorded on respective borrowing dates when the Company met the required milestones and borrowed an additional $10.0 million in 2017 and $25.0 million in 2019. The Company revalued the options as of each reporting period and recorded the change in the fair value in the consolidated statements of operations as other income or expense. On April 26, 2022, the Company repaid in full the $65.0 million in aggregate principal amount outstanding under the Madryn Credit Agreement and the Madryn Credit Agreement, including the corresponding derivatives, was terminated.

Valuation of the embedded derivatives is complex and requires interest rate simulation, capturing optimal decision making process as interest rate fluctuates and estimating the resultant bond valuation and the resultant pay-off to the option holder. Prior to the repayment and termination of the Madryn debt, the Company estimated the fair

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

value of the embedded redemption options based on a “with” and “without” approach using the Black-Derman-Toy model, a form of the Binomial Lattice Model that captures interest rate variability and the prepayment optionality. The Binomial Lattice Model allows for the possibility of exercise before the end of the option’s life and considers future interest rates, volatility and other data with regards to the Company’s credit rating and credit spread. The value of the embedded derivatives was based on the difference between the “with” and “without” analysis. The probability of a change in control occurring was determined to be 50% (cumulative probability through the maturity date) at December 31, 2021.

The Company used the following assumptions to value the Madryn derivatives:

Madryn Put Option Liability



	June 30, 2022	December 31, 2021
Interest rate volatility	—%	25.8%
Market yield rate	—%	6.8%
Term (in years)	—	3.75
Dividend yield	—	—

The estimates were based, in part, on subjective assumptions.

During the periods presented, the Company has not changed the manner in which it values liabilities that are measured at fair value using Level 3 inputs. The Company recognizes transfers between levels of the fair value hierarchy as of the end of the reporting period. There were no transfers within the hierarchy during the six months ended June 30, 2022 or during the year ended December 31, 2021.

The fair value of the debt redemption feature liability included the estimated market rate (credit spread and risk-free rate) and volatility. The higher/lower the estimated volatility, the higher/lower the value of the debt redemption feature liability. The higher/lower the estimated market rate, the higher/lower the value of the debt redemption feature liability.

The following table sets forth a summary of the changes in the fair value of the Company’s Level 3 financial instruments as follows:



	Madryn Put Option Liability
Balance at December 31, 2021	$	703
Change in fair value	396
Settlement	(1,099)
Balance at June 30, 2022	$	—

Balance at December 31, 2020	$	1,440

Change in fair value	(489)


Balance at June 30, 2021	$	951

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

6. Debt

Oaktree Debt

On April 26, 2022, or the Closing Date, the Company entered into a Credit Agreement and Guaranty, or the Credit Agreement, together with certain of its subsidiaries party thereto as guarantors, the lenders from time to time party thereto, or the Lenders, and Oaktree Fund Administration, LLC, as administrative agent for the Lenders (in such capacity, the “Administrative Agent”), pursuant to which the Lenders agreed to make term loans to the Company in an aggregate principal amount of up to $225 million, or collectively, the Term Loans.

Pursuant to the terms of the Credit Agreement, the Term Loans will be advanced in four tranches:

•The first tranche, or the Tranche A Term Loan, was advanced in the amount of $150 million on the Closing Date. A portion of the first tranche was used to repay the outstanding principal and interest under the Madryn Credit Agreement in full, including the early repayment penalty of $6.5 million.

•The second tranche, or the Tranche B Term Loan, of $25 million will be advanced at the Company’s election prior to September 30, 2023, subject to satisfaction of specified gross sales thresholds and subject to the other terms and conditions of the Credit Agreement.

•The third tranche, or the Tranche C Term Loan, of $25 million will be advanced at the Company’s election prior to March 31, 2024, subject to the Administrative Agent having received either (a) evidence that specified FDA approvals have been issued or (b) evidence that specified gross sales thresholds have been met, and subject to the other terms and conditions of the Credit Agreement.

•The fourth tranche, or the Tranche D Term Loan, of $25 million will be advanced at the Company’s election prior to December 31, 2024, subject to the Administrative Agent having received both (a) evidence that specified FDA approvals have been issued and (b) evidence that specified gross sales thresholds have been met (the satisfaction of both (a) and (b), the “Tranche D Funding Milestone”), and subject to the other terms and conditions of the Credit Agreement.

The Term Loans will mature on the 5-year anniversary of the Closing Date, or the Maturity Date. The Term Loans accrue interest at a rate equal to 9% per annum or, at any time following the Tranche D Funding Milestone, 8.25% per annum. Accrued interest is due and payable in cash on the last business day of March, June, September, and December of each year, commencing on June 30, 2022; provided, however, that prior to the 2nd anniversary of the Closing Date, the Company may pay an amount of interest on the outstanding Term Loans corresponding to 600 basis points of the interest rate in kind, or PIK, on each applicable payment date, subject to prior written notice delivered to the Administrative Agent, which has been delivered. Each of the Term Loans will be subject to original issue discount of 2% of the principal amount thereof upon the drawing of each applicable tranche. Upon any payment or prepayment in full or in part of the Term Loans, whether voluntary or involuntary, the Company is required to pay an exit fee equal to 3% of the principal amount of the Term Loan paid, or the Exit Fee.

The Company may elect to prepay all or any portion of the amounts owed prior to the Maturity Date, provided that the Company provides notice to the Administrative Agent, the amount is not less than $5 million, and the amount is accompanied by all accrued and unpaid interest thereon through the date of prepayment, plus the applicable yield protection premium and the applicable Exit Fee. Prepayments of the Term Loans prior to the 2nd anniversary of the Closing Date will be accompanied by a yield protection premium equal to the sum of all interest that would have accrued through such 2nd anniversary plus 4% of the principal amount so prepaid. Prepayments of the Term Loans after the 2nd anniversary will be accompanied by a yield protection premium equal to 4% of the principal amount so prepaid if made prior to the 3rd anniversary of the Closing Date, 2% if made on or after the 3rd anniversary of the Closing Date but prior to the 4th anniversary of the Closing Date, and 0% if made on or after the 4th anniversary of the Closing Date. If the Term Loans are accelerated following the occurrence of an event of default, the Company shall immediately pay to Lenders the sum of all obligations for principal, accrued interest, the applicable yield maintenance premium and the applicable Exit Fee.

Pursuant to the Credit Agreement, the obligations of the Company are guaranteed by its subsidiaries that are party thereto as guarantors. On the Closing Date, the Company and such subsidiaries entered into a U.S. Security Agreement in favor of the Administrative Agent on behalf of Lenders, or the U.S. Security Agreement. Pursuant to the U.S. Security Agreement, the Company and its subsidiaries party thereto granted the

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

Administrative Agent a security interest in substantially all of its personal property, rights and assets to secure the payment of all amounts owed to Lenders under the Credit Agreement.

The Credit Agreement contains customary affirmative and restrictive covenants and representations and warranties. The Company and its subsidiaries are bound by certain affirmative covenants setting forth actions that are required during the term of the Credit Agreement, including, without limitation, certain information delivery requirements, obligations to maintain certain insurance, and certain notice requirements. Additionally, the Company and its subsidiaries are bound by certain restrictive covenants setting forth actions that are not permitted to be taken during the term of the Credit Agreement without prior written consent, including, without limitation, incurring certain additional indebtedness, consummating certain mergers, acquisitions or other business combination transactions, or incurring any non- permitted lien or other encumbrance on the assets of the Company or any of its subsidiaries. The Credit Agreement also contains other customary provisions, such as confidentiality obligations and indemnification rights for the benefit of Lenders. The Credit Agreement contains financial covenants requiring (a) the Company to maintain minimum liquidity of at least $20 million from and after the Closing Date or $25 million from and after the funding of the Tranche B Term Loans, and (b) for each fiscal quarter until gross sales of the Company and its subsidiaries for any 12-consecutive month period are no less than $200 million, minimum gross sales of the Company and its subsidiaries for each consecutive 12-month period ending on the last day of each fiscal quarter in excess of 50% of specified target gross sales for such period. The Credit Agreement provides for a customary equity cure right in the event the Company fails to comply with the minimum gross sales covenant.

The effective interest rate under the Credit Agreement is 10.4%, and the weighted average interest rate is 9.0%. The Company elected to pay interest in kind on up to two-thirds of cash interest payments prior to the second anniversary of the Closing Date, resulting in a minimum initial cash interest rate of 3.00%. The Company incurred $2.4 million in interest expense in connection with the Credit Agreement during the three and six months ended June 30, 2022. No principal payments are due on the Term Loans until the final maturity date on April 26, 2027.

As of June 30, 2022, $151.6 million was outstanding under the Credit Agreement representing the initial principal of $150 million and $1.6 million of interest accrued into the balance of the Tranche A Term Loan.

The Company recorded Oaktree debt on the condensed consolidated balance sheets as follows:



	June 30, 2022		December 31, 2021

	(in thousands)
Principal	$	151,625	$	—


Net unamortized debt discount and issuance costs	(6,143)		—
Net carrying value of Oaktree debt	$	145,482	$	—

As of June 30, 2022, the Company was in compliance with all financial debt covenants under the Credit Agreement.

Madryn Debt

The Madryn Credit Agreement, as amended, provided for term loans in a maximum aggregate principal amount of $65.0 million.

In connection with the Madryn Credit Agreement, the Company and certain of its subsidiaries granted a security interest in substantially all of their respective assets, including, without limitation, intellectual property, and pledges of certain shares of the Company’s subsidiaries, subject to certain excluded collateral exceptions.

Borrowings under the Madryn Credit Agreement bore interest at a rate equal to 3-month LIBOR plus 8.0% per annum provided that no default had occurred. In an event of a default, the interest would increase by an additional 4.0% per annum. The effective interest rate under the amended Madryn Credit Agreement was 18.4%, and the

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

weighted average interest rate was approximately 10.6% until extinguishment. The Company incurred $2.2 million and $3.4 million, respectively, in interest expense in connection with the Madryn Credit Agreement during each of the six months ended June 30, 2022 and 2021. No principal payments were due on the term loans until the final maturity date on September 30, 2025.

The Company also determined that the Madryn Credit Agreement contained put options which are mandatory repayment provisions related to liquidity events or an event of default and a call option related to voluntary repayment option. The Company allocated a fair value of $15.1 million for these embedded derivatives as a debt discount on the original commitment date in August 2017. An additional $5.0 million and $1.6 million of debt discount was recorded on respective borrowing dates when the Company met the required milestones and borrowed an additional $10.0 million in the fourth quarter of fiscal 2017 and $25.0 million in August 2019. The Company revalued the embedded derivatives as of each reporting period and recorded the change in the fair value in the consolidated statements of operations as other income or expense (see Note 5).

On April 26, 2022 the Company repaid in full the $65.0 million in aggregate principal amount outstanding under the Madryn Credit Agreement and the agreement was terminated. The Company recorded a loss on the extinguishment of debt in the amount of $19.0 million, which represents the difference between the carrying value of debt and the cash outflows to extinguish the debt including $6.5 million of the early repayment penalty.

The Company recorded Madryn debt on the condensed consolidated balance sheets as follows:



	June 30, 2022		December 31, 2021

	(in thousands)
Principal	$	—	$	65,000


Net unamortized debt discount and issuance costs	—		(13,094)
Net carrying value of Madryn debt	$	—	$	51,906

7. Leases

The Company recognizes lease liabilities and ROU assets upon commencement for all material leases with a term greater than 12 months. The Company has elected an expedient not to recognize leases with a lease term of 12 months or less on the balance sheet. These short-term leases are expensed on a straight-line basis over the lease term.

ROU assets represent the Company’s right to use an underlying asset for the lease term and lease liabilities represent the Company’s obligation to make lease payments arising from the lease. ROU assets and lease liabilities are recognized at commencement date of the lease based on the present value of lease payments over the lease term. When the rate implicit to the lease cannot be readily determined, the Company utilizes its incremental borrowing rate in determining the present value of the future lease payments. Lease liabilities are accreted each period and reduced for payments. The ROU asset also includes other adjustments, such as for the effects of escalating rents, rent abatements or initial lease costs. The lease term may include periods covered by options to extend or terminate the lease when it is reasonably certain that the Company will exercise a renewal option, or reasonably certain it will not exercise an early termination option. For operating leases, lease expense for minimum lease payments is recognized on a straight-line basis over the expected lease term. For finance leases, the ROU asset depreciates on a straight-line basis over the shorter of the lease term or useful life of the ROU asset and the lease liability accretes interest based on the interest method using the discount rate determined at lease commencement.

The Company has operating leases for facilities and office space. The Company’s finance leases are immaterial. Operating lease assets and the related lease liabilities are included within the ROU operating lease assets on the condensed consolidated balance sheets. The determination of whether an arrangement is, or contains, a lease is performed at the inception of the arrangement. The Company has operating leases for certain facilities and office

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

space to be used in its operations, with remaining lease terms ranging from monthly to 7 years. These leases require monthly lease payments that may be subject to annual increases throughout the lease term. Certain of these leases also include renewal options at the election of the Company to renew or extend the lease for additional years. These optional periods have not been considered in the determination of the ROU or lease liabilities associated with these leases as management did not consider it reasonably certain it would exercise the options. Short-term leases, which have an initial term of 12 months or less, are not recorded in the balance sheet and expense for these leases is recognized on a straight-line basis over the lease term.

The Company’s lease agreements do not contain any termination options, material residual value guarantees, material bargain purchase options or material restrictive covenants. The Company does not have any lease transactions with related parties.

Total lease cost includes the following components for the six months ended June 30, 2022 and 2021, as well as for the year ended December 31, 2021:



	June 30, 2022		June 30, 2021
	(in thousands)
Operating lease expense cost	$	291	$	334



	June 30, 2022			December 31, 2021
Supplemental balance sheet information	(in thousands)
Operating leases
Operating lease right-of-use assets	$	2,023		$	2,206
Operating lease liabilities - short-term	396			402
Operating lease liabilities - long-term	1,726			1,900
Total operating lease liabilities	$	2,122		$	2,302








Weighted-average remaining lease term (years)	5.1			5.5



Weighted-average discount rate (%)	10.3		%	10.4		%



	June 30, 2022		June 30, 2021
Cash paid for amounts included in the measurement of lease liabilities	(in thousands)
Operating cash outflows from operating leases	$	286	$	325



ROU assets obtained in exchange for new lease liabilities
Operating leases	$	—	$	—

Maturities of lease liabilities as of June 30, 2022 were as follows:

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)



Years Ending December 31,	Operating Leases
	(in thousands)
2022	$	277
2023	535
2024	504
2025	429
2026	404
Thereafter	436
Total future minimum lease payments	2,585
Less: Amount of lease payments representing interest	(463)
Present value of future minimum lease payments	$	2,122

8. Shareholders’ Equity

Under the Memorandum of Association and Articles of Association, or Articles, in effect as of June 30, 2022 and December 31, 2021, the Company had authorized an unlimited number of common shares with no par value.

As of June 30, 2022 and December 31, 2021, 24,638,037 and 24,488,335 common shares, respectively, were issued and 24,229,967 and 24,080,265 common shares, respectively, were outstanding.

During the six months ended June 30, 2022, the Company granted stock options and RSUs to employees (see Note 10).

The Company had reserved common shares for future issuances as follows:



	June 30, 2022	December 31, 2021


Warrants to purchase common shares	5,500	5,500
Options to purchase common shares	2,061,133	2,098,087
Remaining shares available under the 2018 Equity Incentive Plan	2,585,503	1,780,687
Shares issuable on vesting of grants of RSUs	142,412	3,982
Remaining shares available under the 2018 ESPP	848,000	661,000
Total	5,642,548	4,549,256

9. Warrants

In March 2017, the Company issued warrants for the purchase of 145,000 Class B ordinary shares to parties related to Rockport Ventures, with a fixed exercise price of $3.80 per share.

During the six months ended June 30, 2022, no warrants were exercised. As of each of June 30, 2022 and December 31, 2021, 5,500 warrants to purchase the Company’s common shares were outstanding and

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

exercisable:

Warrant Holder

Issue Date

In Connection With

Warrant to Purchase

Exercise Price

Expiration Date

Rockport

3/3/2017

Loan agreement

Common

5,500

3.80

8/28/2022

10. Share-Based Compensation

In 2015, the Board of Directors approved and adopted the 2015 Equity Incentive Plan, or 2015 Plan. Pursuant to the 2015 Plan, the Company granted RSAs and stock options to members of the Board of Directors, employees and consultants.

In 2018, the Board of Directors terminated the 2015 Plan and approved the 2018 Equity Incentive Plan, or the 2018 Plan, with an initial reserve of 1,500,000 common shares. Under the 2018 Plan, the Company may grant stock options, equity appreciation rights, RSUs and RSAs. If an award granted under the 2018 Plan expires, terminates, is unexercised, or is forfeited, or if any shares are surrendered in connection with an incentive award, the shares subject to such award and the surrendered shares become available for further awards under the 2018 Plan.

Pursuant to the “evergreen” provision contained in the 2018 Plan, the number of common shares reserved for issuance under the 2018 Plan automatically increases on first day of each fiscal year, commencing on January 1, 2019, in an amount equal to the least of (1) 750,000 shares, (2) 4% of the total number of the Company’s common shares outstanding on the last day of the preceding fiscal year, or (3) a number of common shares as may be determined by the Company’s Board of Directors prior to any such increase date. On each of January 1, 2019, 2020, 2021 and 2022 the number of common shares authorized for issuance increased automatically by 750,000 shares in accordance with the evergreen provision, increasing the number of common shares reserved under the 2018 Plan to 4,500,000 as of June 30, 2022.

During the periods presented, the Company recorded the following share-based compensation expense for stock options and restricted stock awards:



	Three Months Ended June 30,				Six Months Ended June 30,
	2022		2021		2022		2021

	(in thousands)
Sales, general and administrative	$	3,203	$	1,931	$	6,170	$	3,077
Research and development	539		625		1,006		1,236
Total	$	3,742	$	2,556	$	7,176	$	4,313

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

Stock Options



	Number of Options Outstanding	Weighted-Average Exercise Price		Weighted-Average Remaining Contractual Term (in years)	Aggregate Intrinsic Value (in thousands)










Balances at December 31, 2021	2,098,087	$	37.49	7.67	$	67,357
Granted (weighted-average fair value $38.05 per share)	173,162	63.49
Exercised	(149,702)	14.12
Forfeited/canceled	(60,414)	42.71
Balances at June 30, 2022	2,061,133	$	41.22	7.30	$	42,390

As of June 30, 2022, 1,001,297 options were vested and exercisable with weighted-average exercise price of $26.63 per share and a total aggregate intrinsic value of $31.2 million.

During the six months ended June 30, 2022, 149,702 options were exercised at a weighted-average price of $14.12 per share. The intrinsic value of the options exercised during the six months ended June 30, 2022 and 2021 was $6.9 million and $9.5 million, respectively. Upon the exercise of stock options, the Company issued new shares from its authorized shares.

At June 30, 2022, unrecognized compensation expense was $27.3 million related to stock options granted to employees and members of the Board of Directors and $0.9 million related to stock options granted to consultants. The weighted-average period over which such compensation expense will be recognized is 2.4 years.

Stock Options Granted to Employees

Share-based compensation expense for employees is based on the grant date fair value. The Company recognizes compensation expense for all share-based awards ratably on a straight-line basis over the requisite service period of the awards, which is generally the vesting term of four years. During the six months ended June 30, 2022 and 2021, the Company recognized $5.7 million and $3.0 million, respectively, of share-based compensation expense for stock options granted to employees.

The Company uses the Black-Scholes option valuation model to value options granted to employees and consultants, which requires the use of highly subjective assumptions to determine the fair value of share-based awards. The assumptions used in the Company’s option-pricing model represent management’s best estimates. These estimates are complex, involve a number of variables, uncertainties and assumptions and the application of management’s judgment. If factors change and different assumptions are used, the Company’s share-based compensation expense could be materially different in the future. The assumptions and estimates that the Company uses in the Black-Scholes model are as follows:

▪Fair Value of Common Shares. The closing price of the Company’s publicly-traded common shares on the date of grant is used as the fair value of the shares. The Board of Directors intended all options granted to be exercisable at a price per share not less than the estimated per share fair value of the shares underlying those options on the date of grant.

▪Risk-Free Interest Rate. The Company bases the risk-free interest rate used in the Black-Scholes valuation model on the implied yield available on U.S. Treasury zero-coupon issues with a term equivalent to that of the term of the options for each option group on the measurement date.

▪Term. For employee stock options, the expected term represents the period that the Company’s share-based awards are expected to be outstanding. Because of the limitations on the sale or transfer of the Company’s shares during the period the Company was a privately held company, the Company does not believe its historical exercise pattern is indicative of the pattern it will experience as a publicly traded company. The Company consequently uses the Staff Accounting Bulletin 110, or SAB 110, simplified

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

method to calculate the expected term of employee stock options, which is the average of the contractual term and vesting period. The Company plans to continue to use the SAB 110 simplified method until it has sufficient trading history as a publicly traded company. For consultant stock options, the term used is equal to the remaining contractual term on the measurement date.

▪Volatility. The Company determines the price volatility based on the historical volatilities of industry peers as it does not have sufficient trading history for its shares. Industry peers consist of several public companies in the medical device industry with comparable characteristics, including revenue growth, operating model and working capital requirements. The Company intends to continue to consistently apply this process using the same or a similar peer group of public companies until a sufficient amount of historical information regarding the volatility of its own shares becomes available, or unless circumstances change such that the identified peer companies are no longer similar, in which case other suitable peer companies whose common share prices are publicly available would be utilized in the calculation. The volatility is calculated based on the term on the measurement date.

▪Dividend Yield. The expected dividend assumption is based on the Company’s current expectations about its anticipated dividend policy. The Company has no expectation that it will declare dividends on its common shares, and therefore has used an expected dividend yield of zero.

The fair value of stock options granted to employees was estimated using the following assumptions:



	Six Months Ended June 30,
	2022	2021
Volatility	58% - 59%	60%
Risk-free interest rate	1.6% - 2.9%	0.7% - 1.1%
Term (in years)	6.25	6.25
Dividend yield	—	—

Stock Options Granted to Non-Employees

Share-based compensation expense related to stock options granted to non-employees is recognized as the stock options are earned using an accelerated attribution method. The Company believes that the estimated fair value of the stock options is more readily measurable than the fair value of the services rendered. For the six months ended June 30, 2022 and 2021, the Company recognized expense of $0.1 million and $1.0 million, respectively, for stock options granted to consultants.

The fair value of stock options granted to consultants was estimated using the following assumptions during the following periods presented:



	Six Months Ended June 30,
	2022	2021
Volatility	58%	60%
Risk-free interest rate	2.4% - 2.9%	1.6%
Term (in years)	10	10
Dividend yield	—	—

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

Restricted Stock

Each vested RSU entitles the holder to be issued one common share. These awards vest according to a vesting schedule determined by the Compensation Committee of the Company’s Board of Directors, generally over a one to four year period.

The following table represents RSU activity for fiscal 2022:



	Restricted Stock Units	Weighted- Average Grant Date Fair Value








Outstanding unvested at December 31, 2021	3,982	$	69.05
Granted	143,877	61.81
Vested	—	—
Forfeited/canceled	(5,447)	67.79
Outstanding unvested at June 30, 2022	142,412	$	61.78

The fair value of RSUs is the grant date market value of common shares. The Company recognizes share-based compensation expense related to RSUs using a straight-line method over the vesting term of the awards. The share-based compensation expense for RSUs that vested during the six months ended June 30, 2022 and 2021, was $1.3 million and $0.3 million, respectively, which was calculated based on the market value of the Company’s common shares on the applicable grant date.

As of June 30, 2022, the Company had unrecognized share-based compensation cost of approximately $7.5 million associated with unvested awards of RSUs. This cost is expected to be recognized over a weighted-average period of approximately 2.9 years.

11. Net Loss Per Share

The following table summarizes the computation of basic and diluted net loss per share for the periods presented:



	Three Months Ended June 30,				Six Months Ended June 30,
	2022		2021		2022		2021

	(in thousands, except share and per share data)
Numerator:
Net loss	$	(37,106)	$	(5,322)	$	(43,039)	$	(12,270)
Denominator:
Weighted average common shares used for basic and diluted earnings per share	24,396,847		23,949,006		24,354,005		23,883,366


Net loss per share:
Basic and diluted	$	(1.52)	$	(0.22)	$	(1.77)	$	(0.51)

Basic net loss per share is computed by dividing the net loss by the weighted-average number of shares outstanding for the period. Diluted net loss per share is computed by dividing the net loss by the weighted-

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

average number of shares and dilutive share equivalents outstanding for the period, determined using the treasury-share method and the as-if converted method, for convertible securities, if inclusion of these is dilutive.

If the Company reports a net loss, diluted net loss per share is the same as basic net loss per share for those periods because including the dilutive securities would be anti-dilutive.

The following potentially dilutive securities outstanding at the end of the periods presented have been excluded from the computation of diluted shares:



	Six Months Ended June 30,
	2022	2021

Options to purchase common shares	1,873,633	2,054,485
Shares issuable on vesting of grants of RSUs	142,412	39,059
Warrants to purchase common shares	5,500	5,500
Total	2,021,545	2,099,044

12. Related Party Transactions

During each of the six months ended June 30, 2022 and 2021, the Company recorded revenue of $0.6 million for product sales to Herramientas Medicas, S.A., a distribution company owned by a family member of the Chief Executive Officer of the Company. Accounts receivable owed to the Company from this distribution company amounted to approximately $0.3 million and $0.4 million as of June 30, 2022 and December 31, 2021, respectively.

In 2016, the Company also entered into a separate agreement with Dr. Chacón Quirós, the brother of the Company’s Chief Executive Officer Juan José Chacón Quirós, to maintain his clinic in Costa Rica as a MotivaImagine Excellence Center and to host and train physicians in the use of the Company’s products in relevant procedures, among other services, in exchange for cash reimbursement of up to $4,500 per day that such services are rendered. In December 2020, Dr. Chacón Quirós was granted options to purchase 22,068 common shares vesting over four years in equal annual installments, provided that he continues to provide these services at such times. During the six months ended June 30, 2022 and 2021, the Company paid Dr. Chacón Quirós approximately $113,000 and $208,000, respectively, for services rendered.

13. Commitments and Contingencies

Contingencies

Periodically, the Company may have certain contingent liabilities that arise in the ordinary course of business activities. The Company accrues a liability for such matters when it is probable that future expenditures will be made, and such expenditures can be reasonably estimated. There have been no contingent liabilities requiring accrual or disclosure at June 30, 2022 and 2021.

Indemnification

The Company enters into standard indemnification arrangements in the ordinary course of business. Pursuant to these arrangements, the Company indemnifies, holds harmless, and agrees to reimburse the indemnified parties for losses suffered or incurred by the indemnified party, in connection with any trade secret, copyright, patent or other intellectual property infringement claim by any third-party with respect to the Company’s technology. The term of these indemnification agreements is generally perpetual. The maximum potential amount of future payments the Company could be required to make under these agreements is not determinable because it involves claims that may be made against the Company in the future, but have not yet been made.

The Company has entered into indemnification agreements with its directors and officers that may require the Company to indemnify its directors and officers against liabilities that may arise by reason of their status or service as directors or officers, other than liabilities arising from willful misconduct of the individual.

Table of Contents

ESTABLISHMENT LABS HOLDINGS, INC.

Notes to Condensed Consolidated Financial Statements

(Unaudited)

The Company has not incurred costs to defend lawsuits or settle claims related to these indemnification agreements. No liability associated with such indemnifications has been recorded to date.

ITEM 2. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

You should read the following discussion and analysis of our financial condition and results of operations together with the condensed consolidated financial statements and related notes that are included elsewhere in this Quarterly Report on Form 10-Q. This discussion contains forward-looking statements based upon current expectations that involve risks and uncertainties. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of various factors, including those set forth under “Risk Factors,” set forth in Part II, Item 1A of this Quarterly Report on Form 10-Q. See “Special Note Regarding Forward-Looking Statements” above.

Overview

Our line of silicone gel-filled breast implants, branded as Motiva Implants, is the centerpiece of our medical technology platform. Our post-market surveillance data (which was not generated in connection with a United States Food and Drug Administration, or FDA, pre-market approval, or PMA, study but was patient or practitioner reported rather than collected at defined follow-ups) and published third-party data indicates that Motiva Implants show low rates of adverse events (including rupture, capsular contracture, and safety related reoperations) that we believe compare favorably with those of our competitors. We believe the proprietary technologies that differentiate our Motiva Implants enable improved safety and aesthetic outcomes and drive our revenue growth. We have developed other complementary products and services, which are aimed at further enhancing patient outcomes.

We have devoted a majority of our resources since inception to developing our Motiva Implants, which we began selling in October 2010. We have incurred net losses in each year since inception, and we have financed our operations primarily through equity financings and debt financings.

Financial Highlights

Our revenue for the six months ended June 30, 2022 and 2021 was $79.6 million and $62.3 million, respectively, an increase of $17.3 million, or 27.8%. Net losses were $43.0 million for the six months ended June 30, 2022 as compared to $12.3 million for the six months ended June 30, 2021. As of June 30, 2022 we had an accumulated deficit of $249.4 million.

Our cash balance as of June 30, 2022 was $91.3 million.

Recent Developments

As of June 30, 2022, full enrollment of the investigational device exemption, or IDE, clinical trial is complete, and all surgeries in the primary reconstruction cohort were completed. The Motiva IDE clinical trial enrolled 827 patients at 32 centers in the US, Germany, and Sweden. The study is designed to assess the safety and effectiveness of Motiva breast implants in primary breast augmentation, primary breast reconstruction, and revision breast procedures. The study included 562 patients in the augmentation cohorts and 265 in the reconstructive cohorts.

In April 2022, we entered into a Credit Agreement and Guaranty, or the Credit Agreement, together with certain of our subsidiaries as guarantors, the lenders from time to time party thereto, or the Lenders, and Oaktree Fund Administration, LLC, as administrative agent for the Lenders, pursuant to which the Lenders agreed to make term loans to the Company in an aggregate principal amount of up to $225 million. The first tranche was advanced in the amount of $150 million on April 26, 2022. A portion of the proceeds from the first tranche was used to repay in full the $65 million in aggregate principal amount outstanding under the Madryn Credit Agreement (as defined below), including the $6.5 million early repayment penalty, and the Madryn Credit Agreement was terminated. See Note 6 “Debt” for additional information.

We are in the process of expanding our manufacturing facilities and corporate offices in the Coyol Free Zone in Costa Rica, or CFZ. The current $45.6 million estimate for the first phase of the project includes approximately

Table of Contents

100,000 square feet of facility space and would initially increase our manufacturing capacity by approximately 730,000 units per year. Additional phases of the project may be executed, at our option, to further expand manufacturing capacity at the facility. We held the groundbreaking ceremony for our new Sulàyöm Innovation Campus in Costa Rica in the second quarter of 2021 and construction began following finalization and execution of certain contractual arrangements in the third quarter of 2021. The costs for improvement of the land and construction of a cold shell building are being paid by the CFZ, while we are paying for internal improvements and construction. Establishment Labs had an option to purchase the land and cold shell building upon completion of the cold-shell construction. See Note 3, “Balance Sheet Accounts” for additional information regarding this construction project and our right to purchase the title to the land and cold shell building currently under construction. On May 26, 2022, we exercised our option to purchase the title of the land and cold shell building and made our first payment of approximately $9.5 million in connection with the exercise of this option. The remaining approximately $3.1 million payment is expected to be made before the end of fiscal year 2022.

We have made and continue to make significant investments in additional manufacturing capacity, marketing, customer service, and a direct sales force in certain territories like Brazil and several countries in Europe in order to drive and support further adoption of our Motiva Implants. We expect that we will continue to incur losses at least in the near term as we expand our organization to support planned sales growth, while also continuing to invest in research and development of our products, clinical trials to enable regulatory approval in the United States, and in other commercialization efforts. We also expect to incur significant additional expenditures as a public company.

As a result, we may need to raise additional capital through equity and debt financings in order to fund our operations. Our operating results may fluctuate on a quarterly or annual basis in the future, and our growth or operating results may not be consistent with predictions made by securities analysts, if any. If we are unable to achieve our revenue growth objectives, we may not be able to achieve profitability.

Components of Results of Operations

Revenue

We commenced sales of our Motiva Implants in October 2010 and these products have historically accounted for the majority of our revenues. Sales of our Motiva breast implants accounted for over 97% of our revenues for the six months ended June 30, 2022, and we expect our revenues to continue to be driven primarily by sales of these products. We primarily derive revenue from sales of our Motiva Implants to two types of customers: (1) medical distributors and (2) direct sales to physicians, hospitals, and clinics.

We recognize revenue related to the sales of products at the time of shipment, except for a portion of our direct sales revenue that is generated from the sale of consigned inventory maintained at physician, hospital, and clinic locations. For consignment sales, revenue is recognized at the time we are notified by the consignee that the product has been implanted. Our contracts with distributors do not typically contain right of return or price protection and have no post-delivery obligations.

We expect our revenue to increase as we enter new markets, expand awareness of our products in existing markets, and grow our distributor network and direct sales force. We also expect our revenue to fluctuate from quarter to quarter due to a variety of factors, including seasonal fluctuations in demand for Motiva Implants. We are also affected by foreign currency fluctuations.

Cost of Revenue and Gross Margin

Our implants are manufactured at our two facilities in Costa Rica. Cost of revenue is primarily the cost of silicone but also includes other raw materials, packaging, components, quality assurance, labor costs, as well as manufacturing and overhead expenses. Cost of revenue also includes depreciation expense for production equipment, and amortization of certain intangible assets.

We calculate gross margin as revenue less cost of revenue for a given period divided by revenue. Our gross margin may fluctuate from period to period depending, in part, on the efficiency and utilization of our manufacturing facilities, targeted pricing programs, and sales volume based on geography, customer and product type.

Table of Contents

Operating Expenses

Sales, General and Administrative

Sales, general and administrative, or SG&A, expenses primarily consist of compensation, including salary, share-based compensation and employee benefits for our sales and marketing personnel, and for administrative personnel that support our general operations such as information technology, executive management, financial accounting, customer service, and human resources personnel. SG&A expenses also includes costs attributable to freight, marketing, sales support, travel, legal services, financial audit fees, insurance costs, and consulting services. We expect to incur additional SG&A expenses in connection with being a public company as we are no longer able to rely on the “emerging growth company” exemption we were previously afforded under the Jumpstart Our Business Startups Act of 2012, or JOBS Act.

We expect our SG&A expenses to continue to increase in absolute dollars for the foreseeable future as our business grows and we continue to invest in our sales, marketing, medical education, training and general administration resources to build our corporate infrastructure. However, we expect our SG&A expenses to decrease as a percentage of our revenue over the long term, although our SG&A expenses may fluctuate from period to period due to the timing of expenses related to our sales and marketing campaigns.

Research and Development

Our research and development, or R&D, activities primarily consist of engineering and research programs associated with our products under development, as well as R&D activities associated with our clinical development activities. Our R&D expenses primarily consist of compensation, including salary, share-based compensation and employee benefits for our R&D and clinical personnel. We also incur significant expenses for supplies, development prototypes, design and testing, clinical study costs and product regulatory and consulting expenses.

We expect our R&D expenses to continue to increase for the foreseeable future as we continue to advance our products under development, as well as initiate and prepare for additional clinical studies. We received an approval of an IDE from the FDA in March 2018 to initiate a clinical trial and enrolled the first patient in April 2018. In August 2019, we completed all patient surgeries for the IDE aesthetic cohorts, which include primary augmentation and revision augmentation. As of June 2022, we successfully completed enrollment in the primary reconstruction and revision reconstruction cohort. As of June 30, 2022, full enrollment of the IDE clinical trial is complete, and all surgeries in the primary reconstruction cohort were completed. The results of the study are expected to support a PMA submission to the FDA. We estimate that total costs for this IDE clinical trial will be between $30.0 million and $40.0 million over ten years since the inception of the study. We also have other products under development for which we may be required to conduct clinical trials in future periods in order to receive regulatory approval to market these products.

Interest Expense

Interest expense consists primarily of cash and non-cash interest related to outstanding debt and amortization of debt discounts. As of June 30, 2022, we had $151.6 million in outstanding principal under our term loan. See Note 6 “Debt” for additional information.

Change in Fair Value of Derivative Instruments

Change in fair value of derivative instruments consists of changes in the fair value of the put and call option liabilities associated with past outstanding debt instruments.

Other Income (Expense), Net

Other income (expense), net primarily consists of foreign currency gains/losses and interest income.

Loss on Extinguishment of Debt

On April 26, 2022, we repaid in full the $65.0 million in aggregate principal amount outstanding under the Madryn Credit Agreement and the agreement was terminated. We recorded a loss on the extinguishment of debt in the amount of $19.0 million, which represents the difference between the carrying value of debt and the cash outflows to extinguish the debt including $6.5 million of the early repayment penalty.

Table of Contents

Income Tax Expense

Income tax expense consists primarily of income taxes in foreign jurisdictions in which we conduct business. Due to our history of losses, with the exception of Belgium and JAMM Technologies, Inc., we maintain a full valuation allowance for deferred tax assets including net operating loss carry-forwards, R&D tax credits, capitalized R&D and other book versus tax differences.

Business Update Regarding COVID-19

The COVID-19 pandemic has presented a substantial public health and economic challenge around the world, resulting in a disruption in our operations in fiscal 2020 and, to a lesser degree, in fiscal 2021. Business uncertainties created by the COVID-19 pandemic have continued in fiscal 2022. We continue to closely monitor developments related to the pandemic and our decisions will continue to be driven by the health and well-being of our employees, our distributor and plastic surgeon customers, and their patients while maintaining operations to support our customers and their patients in the near-term.

•2022 Results: The first and second quarters of 2022 resulted in record quarterly revenue, which pointed to the recovered global business environment and normalizing medical protocols, especially in Brazil, which continued being impacted by the ongoing pandemic in fiscal 2021 after our other markets, such as Europe, showed normalized business activity. The increase in revenue was driven by an increase in demand, especially in our Latin American markets, and our efforts to expand direct sales in multiple geographies.

•Outlook: At this time, the full extent of the impact of the COVID-19 pandemic on our business, financial condition and results of operations is uncertain and cannot be predicted with reasonable accuracy and will depend on future developments that are also uncertain and cannot be predicted with reasonable accuracy. However, management does not expect future results of operations to be materially impacted by the COVID-19 pandemic.

For additional information on the various risks posed by the COVID-19 pandemic on our business, financial condition and results of operations, please see Item 1A. “Risk Factors” in this report.

Business Update Regarding Ukraine Conflict

In February of 2022, Russia invaded Ukraine and is still engaged in active armed conflict against the country. Our revenue in Russia and Ukraine, in aggregate, accounted for 1.1% and 2.2% of our consolidated net revenue for the six months ended June 30, 2022 and 2021, respectively. We anticipate our revenue from this region to be negatively impacted while the conflict continues.

Table of Contents

Consolidated Results of Operations

The following table sets forth our results of operations for the periods presented, in dollars:



	Three Months Ended June 30,				Six Months Ended June 30,
	2022		2021		2022		2021

	(unaudited) (in thousands)
Revenue	$	41,190	$	31,994	$	79,642	$	62,330
Cost of revenue	13,736		10,526		27,252		20,772
Gross profit	27,454		21,468		52,390		41,558
Operating expenses:
Sales, general and administrative	32,957		21,753		59,870		39,891
Research and development	4,903		4,349		8,501		8,397
Total operating expenses	37,860		26,102		68,371		48,288
Loss from operations	(10,406)		(4,634)		(15,981)		(6,730)
Interest expense	(3,388)		(2,248)		(5,680)		(4,443)
Change in fair value of derivative instruments	1,099		259		703		489

Other income (expense), net	(4,828)		1,709		(2,099)		(1,013)
Loss on extinguishment of debt	(19,019)		—		(19,019)		—
Loss before income taxes	(36,542)		(4,914)		(42,076)		(11,697)
Provision for income taxes	(564)		(408)		(963)		(573)
Net loss	$	(37,106)	$	(5,322)	$	(43,039)	$	(12,270)

Table of Contents

Comparison of Three Months Ended June 30, 2022 and 2021



	Three Months Ended June 30,
	2022			2021

	(unaudited) (in thousands)
Revenue	$	41,190		$	31,994
Cost of revenue	13,736			10,526
Gross profit	$	27,454		$	21,468
Gross margin	66.7		%	67.1		%

Revenue

Revenue increased $9.2 million, or 28.7%, to $41.2 million for the three months ended June 30, 2022 as compared to $32.0 million for the three months ended June 30, 2021. The increase was primarily due to share gains in global markets, particularly in our Latin American markets, and the global economies recovering from the COVID-19 pandemic. Our share gains in global markets were driven, in part, by our efforts to expand direct sales in multiple geographies.

Cost of Revenue and Gross Margin

Cost of revenue increased $3.2 million, or 30.5%, to $13.7 million for the three months ended June 30, 2022 compared to $10.5 million for the three months ended June 30, 2021. The increase in cost of revenue is in line with the increase in revenue due to the economic recovery from the COVID-19 pandemic.

Gross margin decreased to 66.7% for the three months ended June 30, 2022 as compared to 67.1% for the three months ended June 30, 2021 primarily due to geographic mix shifting from European to Latin American markets in the second quarter of 2022.

Operating Expenses



	Three Months Ended June 30,
	2022		2021

	(unaudited) (in thousands)
Operating expenses:
Sales, general and administrative	$	32,957	$	21,753
Research and development	4,903		4,349
Total operating expenses	$	37,860	$	26,102

Sales, General and Administrative Expense

SG&A expense increased $11.2 million, or 51.5%, to $33.0 million for the three months ended June 30, 2022, compared to $21.8 million for the three months ended June 30, 2021. The increase in SG&A was primarily due to a $5.9 million increase in personnel and related costs due to increased headcount, a $2.8 million increase in sales and marketing expenses, a $1.2 million increase in consulting fees in part due to added costs for compliance with Section 404(b) of the Sarbanes-Oxley Act and a $0.5 million increase in commissions due to an increase in sales.

Research and Development Expense

R&D expense increased $0.6 million, or 12.7%, to $4.9 million for the three months ended June 30, 2022, compared to $4.3 million for the three months ended June 30, 2021 primarily due to a $0.4 million increase in regulatory affair costs and a $0.1 million increase in expenditures related to our IDE clinical study in the United States.

Table of Contents

Interest Expense

Interest expense for the three months ended June 30, 2022 was $3.4 million as compared to $2.2 million for the three months ended June 30, 2021. The increase was due to the extinguishment of the Madryn (as defined below) debt and the closing of the new Credit Agreement on April 26, 2022.

Change in Fair Value of Derivative Instruments

Change in fair value of derivative instruments for the three months ended June 30, 2022 resulted in a gain of $1.1 million as compared to a gain of $0.3 million for the three months ended June 30, 2021. The change in fair value of derivative instruments was due to the extinguishment of the Madryn debt and the associated derivatives embedded in the Madryn Credit Agreement, which was paid in full and terminated on April 26, 2022.

Provision for Income Taxes

Provision for income taxes increased $156,000, or 38.2%, to $564,000 for the three months ended June 30, 2022, compared to $408,000 for the three months ended June 30, 2021. The change in the provision for income taxes is primarily due to change in pre-tax income and tax credits claimed in certain foreign jurisdictions.

Other Income (Expense), Net

Other income (expense), net decreased $6.6 million, or 385.0%, to a loss of $4.9 million for the three months ended June 30, 2022, compared to a gain of $1.7 million for the three months ended June 30, 2021. The decrease was primarily due to the foreign currency fluctuations of the euro and the Brazilian real as compared to the U.S. dollar in the second quarter of 2022 compared to the second quarter of 2021, resulting in a foreign currency transaction loss of $4.8 million for the three months ended June 30, 2022, compared to a $2.0 million gain for the three months ended June 30, 2021.

Loss on Extinguishment of Debt

Loss on extinguishment of debt was $19.0 million for the three months ended June 30, 2022 due to the extinguishment of the Madryn debt. The $19.0 million loss on the extinguishment of debt represents the difference between the carrying value of the Madryn debt and the cash outflows to extinguish the debt, including $6.5 million of the early repayment penalty.

Table of Contents

Comparison of the Six Months Ended June 30, 2022 and 2021



	Six Months Ended June 30,
	2022			2021

	(unaudited) (in thousands)
Revenue	$	79,642		$	62,330
Cost of revenue	27,252			20,772
Gross profit	$	52,390		$	41,558
Gross margin	65.8		%	66.7		%

Revenue

Revenue increased $17.3 million, or 27.8%, to $79.6 million for the six months ended June 30, 2022 as compared to $62.3 million for the six months ended June 30, 2021. The increase was primarily due to share gains in global markets, particularly in our Latin American markets, and the global economies recovering from the COVID-19 pandemic. Our share gains in global markets were driven, in part, by our efforts to expand direct sales in multiple geographies.

Cost of Revenue and Gross Margin

Cost of revenue increased $6.5 million, or 31.2%, to $27.3 million for the six months ended June 30, 2022 compared to $20.8 million for the six months ended June 30, 2021. The increase in cost of revenue is in line with the increase in revenue due to the economic recovery from the COVID-19 pandemic.

Gross margin decreased to 65.8% for the six months ended June 30, 2022 compared to 66.7% for the six months ended June 30, 2021, primarily due to geographic mix shifting from European to Latin American markets in fiscal 2022 and incremental inventory obsolescence for Puregraft inventory in the first quarter of 2022, which had a negative impact on our gross profit of 1.4%.

Operating Expenses



	Six Months Ended June 30,
	2022		2021

	(unaudited) (in thousands)
Operating expenses:
Sales, general and administrative	$	59,870	$	39,891
Research and development	8,501		8,397
Total operating expenses	$	68,371	$	48,288

Sales, General and Administrative Expense

SG&A expense increased $20.0 million, or 50.1%, to $59.9 million for the six months ended June 30, 2022, compared to $39.9 million for the six months ended June 30, 2021. The increase in SG&A was primarily due to a $11.5 million increase in personnel and related costs due to increased headcount, a $3.0 million increase in sales and marketing expenses, a $2.9 million increase in consulting fees in part due to added costs for compliance with Section 404(b) of the Sarbanes-Oxley Act and a $1.1 million increase in commissions due to an increase in sales.

Research and Development Expense

R&D expense increased $0.1 million, or 1.2%, to $8.5 million for the six months ended June 30, 2022, compared to $8.4 million for the six months ended June 30, 2021. The increase in R&D expense was primarily due to a $0.5 million increase in regulatory affair costs, partially offset by a $0.4 million decrease in personnel cost.

Table of Contents

Interest Expense

Interest expense increased $1.2 million, or 27.8%, to $5.7 million for the six months ended June 30, 2022, compared to $4.4 million for the six months ended June 30, 2021. The increase was due to the extinguishment of the Madryn debt and the closing of the new Credit Agreement on April 26, 2022.

Change in Fair Value of Derivative Instruments

Change in fair value of derivative instruments for the six months ended June 30, 2022 resulted in a gain of $0.7 million, compared to a gain of $0.5 million for the six months ended June 30, 2021. The change in fair value of derivative instruments was due to the extinguishment of the Madryn debt and the associated derivatives embedded in the Madryn Credit Agreement, which was paid in full and terminated on April 26, 2022.

Provision for Income Taxes

Provision for income taxes increased $390,000, or 68.1%, to $963,000 for the six months ended June 30, 2022, compared to $573,000 for the six months ended June 30, 2021. The change in the provision for income taxes is primarily due to increased pre-tax income in certain foreign jurisdictions.

Other Income (Expense), Net

Other income (expense), net increased $1.1 million to a loss of $2.2 million for the six months ended June 30, 2022, compared to a $1.0 million loss for the six months ended June 30, 2021. The increase was primarily due to the foreign currency fluctuations of the euro and the Brazilian real as compared to the U.S. dollar in fiscal 2021 and 2022, resulting in a foreign currency transaction loss of $2.1 million for the six months ended June 30, 2022, compared to a $0.6 million loss for the six months ended June 30, 2021.

Loss on Extinguishment of Debt

Loss on extinguishment of debt was $19.0 million for the six months ended June 30, 2022 due to the extinguishment of the Madryn debt. The $19.0 million loss on the extinguishment of debt represents the difference between the carrying value of the Madryn debt and the cash outflows to extinguish the debt, including $6.5 million of the early repayment penalty.

Table of Contents

Liquidity and Capital Resources

As of June 30, 2022, we had an accumulated deficit of $249.4 million. Since our inception, we have generated losses and expect to continue to generate losses in the near term. We have financed our operations through a combination of equity financings and debt financings, and from cash generated from operations, primarily from the collection of accounts receivable resulting from sales. Our historical cash outflows have primarily been associated with cash used for operating activities such as expansion of our sales and marketing and distributor infrastructure, investing in inventory, R&D activities, asset acquisitions, capital improvements, including our new manufacturing facility, and other working capital needs. As of June 30, 2022 and December 31, 2021, we had cash of $91.3 million and $53.4 million, respectively.

Our short term liquidity requirements consist primarily of operating expenses and interest payments on our Term Loans (as defined below). We believe that our available cash and cash from operations will be sufficient to satisfy our liquidity requirements for at least the next 12 months, including our contractual and other obligations summarized in our Annual Report on Form 10-K for the year ended December 31, 2021 under “Material Cash Requirements”. Our long-term liquidity needs consist primarily of operating expenses, including expected increases in SG&A and R&D expenses related to our IDE clinical trial and product development and funds necessary to pay for the interest and principal payment on our Term Loans. Our liquidity assumptions may prove to be incorrect, and we could utilize our available financial resources sooner than we currently expect.

Our future capital requirements will depend on many factors, including:

▪the degree and rate of market adoption of our products;

▪the cost and timing of our regulatory activities, especially the IDE clinical trial to obtain regulatory approval for our Motiva Implants in the United States;

▪the emergence of new competing technologies and products;

▪the costs of R&D activities we undertake to develop and expand our products;

▪the costs of commercialization activities, including sales, marketing and manufacturing;

▪the level of working capital required to support our growth; and

▪our need for additional personnel, information technology or other operating infrastructure to support our growth and operations as a public company.

We may need to raise additional capital to execute our business plan. If we are unable to raise additional capital when desired, or on terms acceptable to us, our business, results of operations, and financial condition would be adversely affected.

Cash Flows

The following table sets forth the primary sources and uses of cash for each of the periods presented below:



	Six Months Ended June 30,
	2022		2021
	(unaudited) (in thousands)
Net cash provided by (used in):
Operating activities	$	(16,170)	$	(7,368)
Investing activities	(19,553)		(2,465)
Financing activities	74,013		2,208
Effect of exchange rate changes on cash	(446)		(92)
Net decrease in cash	$	37,844	$	(7,717)

Net Cash Used in Operating Activities

Net cash used in operating activities of $16.2 million for the six months ended June 30, 2022 was primarily comprised of a net loss of $43.0 million and a $0.7 million change in fair value of financial instruments, partially

Table of Contents

offset by a $19.0 million loss on extinguishment of debt, $2.0 million of unrealized foreign currency loss, $7.2 million of share-based compensation expense, $1.9 million of non-cash depreciation expense, $2.6 million of non-cash interest expense due to accretion of debt discounts and interest subsumed into the principal of the new Credit Agreement, and a $1.3 million change in provision for inventory obsolescence, as well as changes in operating assets and liabilities of $6.9 million.

Net cash used in operating activities of $7.4 million for the six months ended June 30, 2021 was comprised of a net loss of $12.3 million and a $0.5 million change in fair value of financial instruments, partially offset by $0.1 million of unrealized foreign currency loss, $4.3 million of share-based compensation expense, $1.8 million of non-cash depreciation expense, $1.0 million of non-cash interest expense due to accretion of debt discounts, $0.1 million of change in provision for doubtful accounts, and a $23,000 change in provision for inventory obsolescence, as well as changes in operating assets and liabilities of $2.2 million.

Net Cash Used in Investing Activities

Net cash used in investing activities of $19.6 million for the six months ended June 30, 2022 primarily consisted of $17.0 million of cash paid for capital expenditures on construction in progress related primarily to our new manufacturing facility in the Coyol Free Zone in Costa Rica, $1.4 million in purchases of property and equipment, $0.7 million of purchases of intangibles and $0.5 million of cash paid for past asset acquisitions.

Net cash used in investing activities of $2.5 million for the six months ended June 30, 2021 primarily consisted of $1.7 million in purchases of property and equipment, $0.4 million of cash paid for past asset acquisitions and $0.3 million of purchases of intangibles.

Net Cash Provided by Financing Activities

Net cash provided by financing activities of $74.0 million for the six months ended June 30, 2022 primarily reflected $143.6 million of borrowings under the new Credit Agreement, net of debt discount and issuance costs, and $2.1 million in proceeds received for stock option exercises, which was partially offset by $71.7 million used to repay borrowings under the Madryn Credit Agreement and $12,000 in repayments on finance leases.

Net cash provided by financing activities of $2.2 million for the six months ended June 30, 2021 primarily consisted of $2.4 million in proceeds received for stock option exercises, which were partially offset by $0.1 million in repayment on finance leases and a $0.1 million tax payment related to shares withheld upon vesting of restricted stock.

Material Cash Requirements

Our material cash requirements have not changed materially from those included in our Annual Report on the Form 10-K filed with the SEC on March 1, 2022 except as related to long-term debt as described in the section below.

Indebtedness

On August 24, 2017, we entered into a credit agreement, or the Madryn Credit Agreement, with Madryn Health Partners, LP, or Madryn, as administrative agent, and a syndicate of lenders that was scheduled to mature on September 30, 2025.

The Madryn Credit Agreement, as amended, provided for term loans in a maximum aggregate principal amount of $65.0 million.

Borrowings under the Madryn Credit Agreement bore interest at a rate equal to 3-month LIBOR plus 8.0% per annum provided that no default has occurred. In an event of a default, the interest would increase by an additional 4.0% per annum. The effective interest rate under the amended Madryn Credit Agreement was 18.4%, and the weighted average interest rate was approximately 10.6% until extinguishment. No principal payments were due on the term loans until the final maturity date on September 30, 2025.

On April 26, 2022, or the Closing Date, we entered into the new Credit Agreement, pursuant to which the Lenders agreed to make term loans to the Company in an aggregate principal amount of up to $225 million, which we collectively refer to as the Term Loans, with the first tranche of $150 million advanced on the Closing Date. Part of the first tranche was used to repay the outstanding principal and interest under the Madryn Credit Agreement in full, including the early repayment penalty of $6.5 million. The Term Loans will mature on the 5-year anniversary of the Closing Date and accrue interest at a rate equal to 9% per annum. As of June 30, 2022, $151.6 million was outstanding under the Credit Agreement.

Table of Contents

See Note 6 “Debt” for additional information regarding the Credit Agreement.

Critical Accounting Policies, Significant Judgments and Use of Estimates

This discussion and analysis of our financial condition and results of operations is based on our consolidated financial statements, which have been prepared in accordance with the generally accepted accounting principles in the United States of America, or GAAP. The preparation of these consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of assets and liabilities, revenue and expenses, and the disclosure of contingent assets and liabilities. Our estimates are based on our historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities. Actual results may differ from these estimates. We believe that the critical accounting policies discussed below are essential to understanding our historical and future performance, as these policies relate to the more significant areas involving management’s estimates and judgments.

We identified certain critical accounting policies that affect certain of our more significant estimates and assumptions used in preparing our consolidated financial statements in the Form 10-K filed with the SEC on March 1, 2022. We have not made any material changes to these policies as previously disclosed in the Form 10-K.

Recent Accounting Pronouncements

Please refer to Note 2 - “Summary of Significant Accounting Policies” in the notes to the unaudited condensed consolidated financial statements included in this Form 10-Q for information on recent accounting pronouncements and the expected impact on our unaudited condensed consolidated financial statements.

ITEM 3: QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

There have been no material changes to our market risk during the three months ended March 31, 2022. See Part II, Item 7A, Quantitative and Qualitative Disclosures About Market Risk in our Annual Report on Form 10-K for the year ended December 31, 2021 for additional information.

ITEM 4. CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures

As of June 30, 2022, the end of the period covered by this Quarterly Report on From 10-Q, our management, with the participation of our Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures as of the end of the period covered by this quarterly report. Disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended, or the Exchange Act) are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is (i) recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and (ii) accumulated and communicated to the Company’s management, including its principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosure. Based on the evaluation of our disclosure controls and procedures, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures were not effective as of the end of the period covered by this quarterly report at the reasonable assurance level.

Material Weaknesses in Internal Control over Financial Reporting

We disclosed in our Annual Report on Form 10-K for the year ended December 31, 2021 that we had a material weakness in our internal control over financial reporting as of December 31, 2021 related to user access control deficiencies and a lack of segregation of duties with respect to certain user roles.

Plan for Remediation of the Material Weakness

We are continuing to review our controls and procedures related to this material weakness and expect to implement changes prior to the end of fiscal 2022. The Company has engaged both internal and external resources to review and remediate the deficient controls around sensitive access and segregation of duties, including identifying any specific areas within our information technology systems that require additional resources.

Changes in Internal Control over Financial Reporting

Other than with respect to the remediation effort discussed above, there was no change in our internal control over financial reporting that occurred during the period covered by this Quarterly Report on Form 10-Q that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Limitations on Effectiveness of Controls and Procedures

Our disclosure controls and procedures and internal control over financial reporting are designed to provide reasonable assurance of achieving the desired control objectives. Our management recognizes that any control system, no matter how well designed and operated, is based upon certain judgments and assumptions and cannot provide absolute assurance that its objectives will be met. In addition, the design of disclosure controls and procedures must reflect the fact that there are resource constraints and that management is required to apply judgment in evaluating the benefits of possible controls and procedures relative to their costs. Similarly, an evaluation of controls cannot provide absolute assurance that misstatements due to error or fraud will not occur or that all control issues and instances of fraud, if any, have been detected.

Table of Contents

PART II. OTHER INFORMATION

ITEM 1. LEGAL PROCEEDINGS

We are not a party to any material legal proceeding required to be disclosed under Item 103 of Regulation S-K.

ITEM 1A. RISK FACTORS

Investing in our common shares involves a high degree of risk. We operate in a rapidly changing economic and competitive environment that presents numerous risks, many of which are driven by factors that we cannot control or predict. The following risk factors describe circumstances or events that could have a negative effect on our business, financial condition or operating results. You should consider the following risks carefully, together with all the other information in this Quarterly Report on Form 10-Q, including our consolidated financial statements and notes thereto, before you invest in our common shares. If any of the following risks occur, our business, financial condition, or operating results, could be adversely affected. As a result, the trading price of our common shares could decline, and you could lose part or all of your investment. Additional risks and uncertainties not currently known to us or that we currently believe are not material could also impair our business, financial condition or operating results.

Risks Related to COVID-19

The COVID-19 pandemic has adversely affected our business and our financial results and may continue to do so for the foreseeable future.

The COVID-19 pandemic adversely impacted our business, resulting in a material disruption of our operations in fiscal 2020, and, to a lesser degree, in fiscal 2021, and we expect the impact to continue through at least the duration of the pandemic as regions respond to local conditions. To date, the impact includes:

•the deferral of procedures using our products;

•disruptions or restrictions on the ability of many of our employees and of third parties on which we rely, to work effectively, including “stay-at-home” orders and similar government actions; and

•temporary closures of our facilities and of the facilities of our customers and suppliers.

As jurisdictions throughout the world continue to respond to the pandemic, the degree of the foregoing impacts may increase in scope or magnitude, or we may experience additional adverse effects in one or more regions. Any other outbreaks of contagious diseases or other adverse public health developments in countries where we operate or where our customers or suppliers are located could also have a material and adverse effect on our business, financial condition and results of operations.

Due to the COVID-19 pandemic, surgeons and their patients have been, and in certain regions continue to be, required, or are choosing, to defer elective procedures in which our products otherwise could be used, and many facilities that specialize in the procedures in which our products otherwise could be used have temporarily closed. In addition, even after the pandemic subsides or governmental orders no longer prohibit or recommend against performing such procedures, patients may continue to defer such procedures due to personal concerns. Further, facilities at which our products typically are used may not reopen or, even if they reopen, patients may elect to have procedures performed at facilities that are, or are perceived to be, lower-risk, such as private surgery centers, and our products may not be approved at such facilities, and we may be unable to have our products approved for use at such facilities on a timely basis, or at all. The effect of the pandemic on the broader economy could also negatively affect demand for elective procedures using our products, both in the near- and long-term.

Workforce limitations and travel restrictions resulting from government actions taken to contain the spread of COVID-19 have and will continue to adversely affect almost every aspect of our business. If a significant percentage of our workforce, or of the workforce of third parties on which we rely, cannot work, including because of illness or travel or government restrictions, our operations will be negatively affected. To comply with government restrictions and social distancing guidelines in many countries around the world, there was an increased reliance on working from home for our workforce and on the workforce of third parties on which we rely, and a large portion of our workforce continues to work from home. Our sales personnel and third-party agents working from home work largely using virtual and online engagement tools and tactics, which may be less effective than our typical in-person sales and marketing programs. In addition, during periods of significant outbreaks of COVID-19, we reduced in-person access to our hands-on surgeon trainings, which, in turn, adversely impacted our ability to educate and train surgeons on the proper use of our products, which may make

Table of Contents

surgeons less comfortable using, and therefore less likely to use, our products. We expect that future governmental mandates or other restrictions may also limit our ability to develop, and therefore launch, the products we believe will drive our future revenue growth on the timelines we anticipated previously and could also delay the planned launch of products in 2023 and beyond. Any future governmental mandates or other restrictions may also cause us not to submit required filings on our previous timetables, including with the FDA, or other regulatory bodies, both in the U.S. and outside the U.S. The COVID-19 pandemic has adversely impacted our IDE clinical trial operations in the United States, including our ability to recruit and retain patients and principal investigators and site staff who, as healthcare providers, have heightened exposure to COVID-19. In addition, changes impacting workforce function at the FDA and other regulatory bodies, as well as changes impacting workforce function at the facilities at which we seek to have new products approved for use, could adversely impact the timing of when our new products are cleared for marketing and approved for use, either of which would adversely impact the timing of our ability to sell these new products and would have a material and adverse effect on our revenue growth.

Further, we have experienced, and may continue to experience, disruptions in the manufacture and distribution of our products and in our supply chain as a result of the COVID-19 pandemic. Any future disruptions or other events that result in staffing shortages, production slowdowns, stoppages, or disruptions in delivery systems could materially and adversely affect our ability to manufacture or distribute our products, or to obtain the raw materials and supplies necessary to manufacture and distribute our products, in a timely manner, or at all.

We may also experience other unknown adverse impacts from the COVID-19 pandemic that cannot be predicted. For example, hospitals and other facilities at which we sell our products may renegotiate their purchase prices, including as a result of, or the perception that they may be suffering, financial difficulty as a result of the pandemic. Similarly, facilities at which we seek to sell our products in the future may require price reductions relative to the price at which we previously expected to sell our products. Reduction in the prices at which we sell products to existing customers may have a material and adverse effect on our future financial results and reductions in the prices at which we expected to sell products would have a material and adverse effect on our expectations for revenue growth.

Further, the global capital markets experienced, and we expect will continue to experience, disruption and volatility due to the COVID-19 pandemic and its impact on economic conditions, adversely impacting access to capital not only for us, but also for our customers and suppliers who need access to capital. Their inability to access capital in a timely manner, or at all, could adversely impact demand for our products and/or adversely impact our ability to manufacture or supply our products, any of which could have a material and adverse effect on our business.

The full extent to which the COVID-19 pandemic will, directly or indirectly, impact our business, results of operations and financial condition, including our sales, expenses, supply chain integrity, manufacturing capability, research and development activities, and employee-related compensation, is currently highly uncertain and cannot be predicted with reasonable accuracy at this time and will depend on future developments that are also highly uncertain and cannot be predicted with reasonable accuracy at this time, including, without limitation:

•new information that may emerge concerning COVID-19, its contagiousness or virulence;

•resurgences in COVID-19 transmission and infection following the easing or lifting of governmental or other restrictions or following resumption of surgical procedures, whether as a result thereof, as a result of reinfection, as a result of a delay in the emergence of symptoms following infection (or reinfection) by COVID-19, or as a result of COVID-19’s ability to lay dormant following infection (or reinfection), and the adverse impact the foregoing may have on our business and financial condition, including because of the adverse impact on patients’ willingness to undergo procedures in which our products could be used;

•actions required or recommended to contain or treat COVID-19, in light of any or all of the foregoing or other as-yet unanticipated developments, whether related to COVID-19 directly or indirectly; and

•the direct and indirect economic impact, both domestically and abroad, of the COVID-19 pandemic as a result of any or all of the foregoing, including actions taken by local, state, national and international governmental agencies, whether such impact affects customers, suppliers, or markets generally.

Table of Contents

Risks Related to the Development and Commercialization of Our Products

We have a limited operating history in the United States and may face difficulties encountered by companies early in their commercialization in competitive and rapidly evolving markets.

Our Motiva Implants have been marketed solely in countries outside of the United States since October 2010, and as such, we have a limited operating history upon which to evaluate our business and forecast our future net sales and operating results. In assessing our business prospects, you should consider the various risks and difficulties frequently encountered by companies early in their commercialization in competitive markets, particularly companies that develop and sell medical devices. These risks include our ability to:

•implement and execute our business strategy;

•expand and improve the productivity of our direct sales force, distributors and marketing programs to grow sales of our products;

•increase awareness of our brands and build loyalty among plastic surgeons and patients;

•manage expanding operations;

•respond effectively to competitive pressures and developments;

•enhance our existing products and develop new products;

•maintain and obtain regulatory clearance or approval of our existing products and commercialize new products;

•respond to changing regulations associated with medical devices across all geographies;

•perform clinical trials with respect to our existing products and any new products;

•attract, retain and motivate qualified personnel in various areas of our business; and

•obtain and maintain coverage and adequate levels of reimbursement for our products.

Due to our limited operating history in the United States, we may not have the institutional knowledge or experience to be able to effectively address these and other risks that we may face. In addition, we may not be able to develop insights into trends that could emerge and negatively affect our business and may fail to respond effectively to those trends. As a result of these or other risks, we may not be able to execute key components of our business strategy, and our business, financial condition and operating results may suffer.

Our success depends, in part, on our ability to continue to enhance our existing products and services and develop or commercialize new products and services that respond to customer needs and preferences, which we expect will require us to incur significant expenses.

In recent years, we have incurred significant costs in connection with the development of Motiva Implants, the Mía technology, and other products and services. We expect our research and development expenses to increase significantly as we continue with our IDE clinical trial in the United States. We will also incur significant expenses to expand our sales and marketing organization to support sales of Motiva Implants, including but not limited to a direct sales force in Brazil and several European countries, as well as other products outside the United States and Canada.

We may not be able to compete effectively with our competitors, and ultimately satisfy the needs and preferences of our customers, unless we can continue to enhance existing products and develop or acquire new innovative products and services. Product development requires the investment of significant financial, technological and other resources. Product improvements and new product introductions also require significant planning, design, development and testing at the product and manufacturing process levels. We may not be able to timely or effectively develop product improvements or new products and services. Likewise, we may not be able to acquire new products on terms that are acceptable to us, or at all. Furthermore, in most countries, we need to obtain regulatory approval in order to market and sell our products, which may limit our ability to act quickly in scaling commercialization in those countries, including the United States. Our competitors’ new products may beat our products to market, be more effective or safer or have new features, obtain better market acceptance or render our products and services obsolete. Any new or modified products and services that we develop may not receive regulatory clearance or approval, or achieve market acceptance or otherwise generate any meaningful sales or profits for us.

Table of Contents

Motiva Implants are not currently approved for commercial sale in the United States. Obtaining such approval is costly and time consuming, and we may not obtain the regulatory approval required to sell our products in the United States.

Neither we, nor any future collaboration partner, can commercialize Motiva Implants in the United States without first obtaining regulatory approval for the product from the FDA. In the EU and other countries, we previously obtained a CE Mark, before making Motiva Implants available for commercial sale. FDA guidance on silicone breast implants mandates approval via the PMA process. Extensive preclinical and clinical testing will be required to support the PMA. At least one well-controlled clinical trial is required for approval, such as the one we began in April 2018, which will require us to commit significant financial and personnel resources. Additionally, we will be required to commit to significant and costly post-approval requirements, which will include follow-up of our clinical trial patients for up to ten years, creation of a patient registry, and/or other studies, and implementation of training programs for physicians. We may be unable to fund, enroll, or complete such trials in a timely fashion, or at all, and we may have an insufficient number of enrolled patients follow up as instructed. The results of clinical studies may not be favorable enough to support marketing approval in the United States, or may raise other questions (pertaining, for example, to product safety or effectiveness) that jeopardizes our current approvals for sale in other territories. The FDA approval process will take at least several years to complete, and FDA approval may never be obtained. We must also demonstrate that our manufacturing facilities, processes and controls are adequate to support FDA approval and that our clinical investigators complied with good clinical practices in the conduct of the clinical trial for our Motiva Implants.

Furthermore, FDA regulatory approval is not a guarantee, and the filing and approval process itself is expensive and may take several years. The FDA also has substantial discretion in the approval process. Despite the time and expense exerted, failure may occur at any stage, and we could encounter problems that cause us to abandon or repeat clinical studies, including our ongoing IDE clinical trial that commenced in April 2018. The FDA can delay, limit, or deny approval of a product candidate for many reasons, including, but not limited, to:

•a product candidate may not be deemed to be safe and effective;

•FDA officials may not find the data from clinical and preclinical studies sufficient;

•the FDA may not approve our or our suppliers’ processes or facilities;

•the FDA may consider clinical studies inadequate and the data inadequate if, among other things, appropriate steps have not been taken in the design, conduct, reporting and analysis of the studies to minimize bias; or

•the FDA may change its approval policies or adopt new regulations.

If Motiva Implants, or our future products, fail to demonstrate safety and efficacy in further clinical studies that may be required for U.S. approval, or do not gain regulatory approval, our business and results of operations will be harmed.

Moreover, obtaining regulatory approval for marketing of our products in one country does not ensure we will be able to obtain regulatory approval in other countries, while a failure or delay in obtaining regulatory approval in one country may have a negative effect on the regulatory process in other countries.

The regulatory process is expensive, time consuming and uncertain. There is no guarantee that the United States Food and Drug Administration, or FDA, or non-U.S. regulatory agencies will grant approval for our current or future products, and failure to obtain regulatory approvals in the United States and other international jurisdictions, or revocation of approvals in those jurisdictions, will prevent us from marketing our products.

We intend to seek additional distribution and marketing partners for Motiva Implants and may market specific products only in international markets. We have obtained a CE Mark for Motiva Implants and are therefore authorized to sell in the EU; however, in order to market in regions such as the Asia Pacific region and many other jurisdictions, we must obtain separate regulatory approvals. The approval procedures vary among countries and can involve additional clinical testing, and the time required to obtain approvals may differ from that required to obtain the CE Mark or FDA approval. Moreover, clinical studies or manufacturing processes conducted in one country may not be accepted by regulatory authorities in other countries. Approval by the FDA does not ensure approval by regulatory authorities in other countries, and approval by one or more international regulatory authorities does not ensure approval by regulatory authorities in other countries or by the FDA. However, a failure

Table of Contents

or delay in obtaining regulatory approval in one country may have a negative effect on the regulatory process in others. An international regulatory approval process may include all of the risks associated with obtaining FDA approval. We may not obtain international regulatory approvals on a timely basis, if at all. We may not be able to file for regulatory approvals and, even if we file, we may not receive necessary approvals to commercialize our products in any market.

Before obtaining regulatory approval for the sale of a planned product, we may be required to conduct extensive preclinical and clinical studies to demonstrate the safety and efficacy of our planned products in human patients. Clinical studies can be expensive, difficult to design and implement, can take many years to complete, and are uncertain as to outcome. A failure of one or more of our clinical studies could occur at any stage of testing. In connection with the initiation of a clinical study in the United States, we filed an IDE application in 2017, which was approved in March 2018 and our first patient was enrolled in April 2018. Our ongoing U.S. IDE trial may take longer to enroll than anticipated, may be stopped for unforeseen safety issues or may not be successful in meeting its endpoints, in which case our U.S. regulatory pathway would require subsequent additional clinical trials.

Numerous unforeseen events during, or as a result of, preclinical and clinical studies could occur, which would delay or prevent our ability to receive regulatory approval or commercialize Motiva Implants or any of our planned products, including the following:

•clinical studies may produce negative or inconclusive results, and we may decide, or regulators may require us, to conduct additional clinical studies or abandon product development programs;

•the number of patients required for clinical studies may be larger than we anticipate, enrollment in these clinical studies may be insufficient or slower than we anticipate, or patients may drop out of these clinical studies at a higher rate than we anticipate;

•the cost of clinical studies may be greater than we anticipate;

•third-party contractors may fail to comply with regulatory requirements or meet their contractual obligations to us in a timely manner, or at all;

•we might suspend or terminate clinical studies of our planned products for various reasons, including a finding that our planned products have unanticipated serious side effects or other unexpected characteristics, or that the study subjects are being exposed to unacceptable health risks;

•regulators may not approve our proposed clinical development plans;

•regulators or independent institutional review boards, or IRBs, may not authorize us or our investigators to commence a clinical study or conduct a clinical study at a prospective study site;

•regulators or IRBs may require that we, or our investigators, suspend or terminate clinical studies for various reasons, including noncompliance with regulatory requirements;

•regulators may determine that the clinical data submitted to support our request for approval is unreliable or incomplete as a result of any number of factors, including potential financial bias associated with equity holdings in the Company by study investigators, or significant payments by the Company to study investigators for consulting work, which may result in regulators requesting further data analysis or other confirmatory studies to be performed, or determining the data does not support regulatory approval;

•regulators in countries where Motiva Implants are currently marketed may require that we suspend commercial distribution if there is noncompliance with regulatory requirements or safety concerns;

•regulators in countries where Motiva Implants are currently marketed may suspend commercial distribution of silicone breast implants due to safety or other concerns generally applicable to the product category;

•the supply or quality of our planned products or other materials necessary to conduct clinical studies of our planned products may be insufficient or inadequate; and/or

•the enactment of new regulatory requirements in Europe under the new Medical Device Regulation may make approval times longer and standards more difficult to pass.

Table of Contents

If we, or any future collaboration partner, are required to conduct additional clinical trials or other testing of Motiva Implants or any planned products, those clinical studies or other testing may not be successfully completed. Additionally, if the results of these studies or tests are not positive, or if they raise safety concerns, we may:

•be delayed in obtaining marketing approvals for Motiva Implants or our planned products;

•not obtain marketing approval at all;

•obtain approval for indications that are not as broad as intended;

•have a product removed from the market after obtaining marketing approval;

•be subject to additional post-marketing testing requirements; and/or

•be subject to restrictions on how the product is distributed or used.

Even if we obtain regulatory approvals or clearances in a jurisdiction, our products may be removed from the market due to a variety of factors, including adverse events, recalls, suspension of regulatory clearance to sell, or other factors. For example, during the summer of 2016 while we were transitioning from one notified body to another, our CE Mark for Motiva Implants was temporarily not in force. We expect that the initial U.S. approval will be subject to a lengthy and expensive follow-up period, during which we must monitor patients enrolled in clinical studies and collect data on their safety outcomes. Even if FDA approval is obtained, the FDA has authority to impose postmarket approval conditions, which can include (i) restrictions on device’s sale, distribution, or use, (ii) continuing evaluation of the device’s safety and efficacy, (iii) additional warning/hazard labeling requirements, (iv) significant record management, (v) periodic reporting requirements, and (vi) any other requirements the FDA determines necessary to provide reasonable assurance of the device’s safety and effectiveness. Completion of this follow-up study, in a manner which results in data sufficient to maintain FDA approval, is subject to multiple risks, many of which are outside of our control. These include, but are not limited to, our ability to fund the ongoing study from our operations or via additional fundraising; study participants’ willingness and ability to return for follow-up study visits; and maintenance of a suitable study database over a long period of time. Even if completed and appropriately evaluated, the study follow-up may reveal safety or other issues that impact the approved labeling or may result in withdrawal of Motiva Implants from the marketplace in the United States or elsewhere.

Although we launched Motiva Implants commercially in October 2010 and have sold over 2.3 million units to date in various countries outside the United States, we do not have as much post-market surveillance data as our competitors and may not have clearly identified all possible or actual risks of our products. Furthermore, if our clinical trials do not produce patient data that compares favorably with breast implants that are already on the market, physicians and patients may opt to not use our products, and our business would suffer.

Our product development costs will also increase if we experience delays to our clinical trials or approvals. We do not know whether any clinical studies will begin as planned, will need to be restructured, or will be completed on schedule, or at all.

Significant clinical study delays could allow our competitors to bring products to market before we do, which would impair our ability to commercialize our planned products and harm our business and results of operations.

Even if clinical trials demonstrate acceptable safety and efficacy for Motiva Implants in some patient populations, the FDA or similar regulatory authorities outside the United States may not approve the marketing of Motiva Implants or may approve it with restrictions on the label, which could have a material adverse effect on our business, financial condition, results of operations and growth prospects.

It is possible the FDA or similar regulatory authorities may not consider the results of our clinical trials to be sufficient for approval of Motiva Implants for our desired indications for use. Guidance issued by the FDA in 2006 suggests that a single well-controlled study is required for approval of a new silicone breast implant. The FDA may nonetheless require that we conduct additional clinical studies, possibly using a different clinical study design.

Moreover, even if the FDA or other regulatory authorities approve the marketing of Motiva Implants, the approval may include additional restrictions on the label that could make Motiva Implants less attractive to physicians and patients compared to other products that may be approved for broader indications, which could limit potential sales of Motiva Implants.

If we fail to obtain FDA or other regulatory approval of Motiva Implants, or if the approval is narrower than what we seek, it could impair our ability to realize value from Motiva Implants, and therefore may have a material adverse effect on our business, financial condition, results of operations and growth prospects.

Table of Contents

Any future distribution or commercialization agreements we may enter into with respect to our current or planned products may place the development of these products outside our control, or may otherwise be on terms unfavorable to us.

We may enter into additional distribution or commercialization agreements with third parties with respect to our current or planned products, for commercialization in or outside the United States. Our likely collaborators for any distribution, marketing, licensing or other collaboration arrangements include large and mid-size medical device and diagnostic companies, regional and national medical device and diagnostic companies, and distribution or group purchasing organizations. We will have limited control over the amount and timing of resources that our collaborators dedicate to the development or commercialization of our planned products. Our ability to generate revenue from these arrangements will depend in part on our collaborators’ abilities to successfully perform the functions assigned to them in these arrangements.

Collaborations may be terminated and, if terminated, may result in a need for additional capital to pursue further development or commercialization of the applicable planned products. Collaborators may own or co-own intellectual property covering our products that results from our collaboration with them. In such cases, we would not have the exclusive right to commercialize such intellectual property.

Any termination or disruption of collaborations could result in delays in the development of planned products, increases in our costs to develop the planned products or the termination of development of a planned product.

If we are unable to educate clinicians on the safe, effective and appropriate use of our products and designed surgeries, we may experience increased claims of product liability and may be unable to achieve our expected growth.

We make extensive physician medical education resources available to clinicians in an effort to ensure that they have access to current treatment methodologies, are aware of the advantages and risks of our Motiva Implants and other products, and are educated regarding the safe and appropriate use of our products. It is critical to the success of our business to broadly educate clinicians who use or desire to use our products to provide them with adequate instructions in the appropriate use of our products and designed surgeries. Certain of our products require the use of specialized techniques which may not be covered in medical school curricula and/or product-specific knowledge. For example, metal implant such as screws or artificial joints, produce an artifact when magnetic resonance imaging, or MRI, is used to image the area in which the object resides. Our Qid Safety Technology microtransponder embedded in certain Motiva Implants contains metal and causes an artifact that can affect breast cancer screening using MRI, and this artifact is not present in other imaging modalities such as breast ultrasound and film or digital mammography. It is important that we educate physicians and patients on the risks associated with MRI artifacts and how to mitigate them if they choose to utilize Motiva Implants that contain a Qid microtransponder. Failure to provide adequate training and education could result in, among other things, unsatisfactory patient outcomes, patient injury, negative publicity or increased product liability claims or lawsuits against the company, any of which could have a material and adverse effect on our business and reputation. Claims against the company may occur even if such claims are without merit and/or no product defect is present, due to improper surgical technique, inappropriate use of our products, or other lack of awareness regarding the safe and effective use of our products. If we fail to educate physicians and patients about any of these factors, they may make decisions or conclusions regarding Motiva Implants without full knowledge of the risks and benefits or may view our Motiva Implants negatively.

As part of our effort to educate and train plastic surgeons through our medical educational platform, we completed 206 and 126 medical training sessions worldwide during 2021 and 2020, respectively. If we are unable to offer, or if we experience a delay in offering, medical training sessions, we may experience reduced or slower than expected adoption of our products. Although since the outbreak of the global COVID-19 pandemic we have offered virtual training sessions through our medical educational platform, the limited ability to provide in-person programs to surgeons may reduce the effectiveness of, and interest in, our medical education efforts.

Commercial success of Motiva Implants in the United States or elsewhere depends on our ability to accurately forecast customer demand and manufacture sufficient quantities of product in the implant sizes that patients and physicians request, and to manage inventory effectively and the failure to do so could have a material adverse effect on our business, financial condition, results of operations and growth prospects.

Manufacturing of silicone breast implants requires costly capital equipment and a highly skilled workforce. There is a significant lead time to build and certify a new manufacturing facility. Until 2017, we had one manufacturing

Table of Contents

facility in Costa Rica, and we experienced inventory shortages from time-to-time that impaired our ability to meet market demand. In March 2017, our second manufacturing facility, also located in Costa Rica, became operational, and we received certification under the multi-country MDSAP protocol and began shipping saleable product. Although we believe our new, larger manufacturing facility, in combination with our first facility, will give us adequate manufacturing capacity to meet demand for at least the next two years, we have, in the past, been unable to fill all incoming orders to meet growing demand. We began construction on the expansion of one of our facilities in Costa Rica during the third quarter of 2021. If this expansion is not completed in a timely manner, our ability to fill incoming orders may be adversely impacted. In addition, if we obtain FDA approval, we will likely need to obtain additional manufacturing capacity prior to any commercialization of our Motiva Implants in the United States. If demand increases faster than we expect, or if we are unable to produce the quantity of goods that we expect with our current facilities, we may not be able to grow revenue at an optimal rate. There may be other negative effects from supply shortages, including loss of our reputation in the marketplace and a negative impact on our relationships with our distributors.

On the other hand, if demand for our products declines, or if market supply surpasses demand, we may not be able to reduce manufacturing expenses or overhead costs proportionately. We have invested significantly in our manufacturing capacity in order to vertically integrate our business. If an increase in supply outpaces the increase in market demand, or if demand decreases, the resulting oversupply could adversely impact our sales and result in the underutilization of our manufacturing capacity, higher inventory carrying costs and associated working capital, changes in revenue mix, and/or price erosion, any of which would lower our margins and adversely impact our financial results.

Risks Related to Our Business, Industry and Operations

We expect to incur losses for the foreseeable future, and our ability to achieve and maintain profitability depends on the commercial success of our Motiva Implants, which accounted for approximately 98% of our revenues for each of the years ended December 31, 2021 and 2020 and we expect our revenues to continue to be driven primarily by sales of these products.

We have incurred losses to date and expect to continue to incur losses for the foreseeable future. Sales of our Motiva Implants accounted for approximately 98% of our revenues for each of the years ended December 31, 2021 and December 31, 2020 and we expect our revenues to continue to be driven primarily by sales of these products. In order to achieve and sustain profitability, our revenues from these products will need to grow beyond the levels we have achieved in the past. If physicians and/or patients do not perceive our products to be competitive in features and safety when compared to other products in the market, or if demand for our Motiva Implants or for breast implants in general decreases, we may fail to achieve sales levels that provide for future profitability.

Our ability to successfully market Motiva Implants and our other current and future offerings depends on numerous factors, including but not limited to:

•the outcomes of current and future clinical studies of Motiva Implants, including our ongoing IDE clinical trial, to demonstrate our products’ value in improving safety outcomes and/or patient satisfaction;

•acceptance of Motiva Implants as safe and effective by patients, caregivers and the medical community;

•an acceptable safety profile of Motiva Implants in the global market;

•whether key thought leaders in the medical community accept that such clinical studies are sufficiently meaningful to influence their or their patients’ choices of product;

•maintenance of our existing regulatory approvals and expansion of the geographies in which we have regulatory approvals;

•designing commercially viable processes at a scale sufficient to meet anticipated demand at an adequate cost of manufacturing, and that are compliant with ISO 13485 Quality Management System requirements and/or good manufacturing practice, or GMP, requirements, as set forth in the FDA’s Quality System Regulation, Brazilian and other international regulations;

•our success in educating physicians and patients about the benefits, administration and use of Motiva Implants;

Table of Contents

•the availability, perceived advantages, relative cost, relative safety and relative efficacy of alternative and competing treatments;

•the willingness of patients to pay out-of-pocket for breast augmentation and reconstruction procedures in the absence of coverage and reimbursement for such procedures;

•the success of our internal sales and marketing organization and the sales forces of our distributors; and

•continued demand for breast augmentation and reconstruction procedures using silicone implants, which may be adversely affected by events involving either our products or those of our competitors, including FDA warnings to patients regarding Breast Implant-Associated Anaplastic Large Cell Lymphoma, or BIA-ALCL.

Some of these factors are beyond our control. If we are unable to continue to commercialize Motiva Implants and our other products, or unable to obtain a partner to commercialize them, we may not be able to produce any incremental revenues related to Motiva Implants and our other products. This would result in an adverse effect on our business, financial condition, results of operations and growth prospects.

We have incurred net operating losses in the past and expect to incur net operating losses for the foreseeable future.

We have incurred net operating losses since our inception, and we continue to incur significant research and development and general and administrative expenses related to our operations. We do not expect to be profitable in 2022, and in future years we expect to incur significant research and development expenses related to, among other things, the IDE clinical study of Motiva Implants in the United States. Investment in medical device product development, particularly clinical studies, is highly speculative. It entails substantial upfront capital expenditures and significant risk that any potential planned product will fail to demonstrate adequate accuracy or clinical utility. We may not be profitable for some time. As of June 30, 2022, we had an accumulated deficit of $249.4 million.

We expect that our future financial results will depend primarily on our success in launching, selling and supporting Motiva Implants and other products that are part of our product platform. This will require us to be successful in a range of activities, including manufacturing, marketing, and selling Motiva Implants. We may not succeed in these activities and may never generate revenue that is sufficient to be profitable in the future. Even if we are profitable, we may not be able to sustain or increase profitability on a quarterly or annual basis. Our failure to achieve sustained profitability would depress the value of our company and could impair our ability to raise capital, expand our business, diversify our planned products, market our current and planned products, or continue our operations.

If our available cash resources and anticipated cash flow from operations are insufficient to satisfy our liquidity requirements, we may seek to sell equity or convertible debt securities, enter into a credit facility or another form of third-party funding, or seek other debt financing.

We may need additional funds to support our operations, and such funding may not be available to us on acceptable terms, or at all, which would force us to delay, reduce or suspend our planned development and commercialization efforts. Raising additional capital may subject us to unfavorable terms, cause dilution to our existing shareholders, restrict our operations, or require us to relinquish rights to our products and technologies. Our operations have consumed substantial amounts of cash since our inception, and we expect to incur significant expenses in connection with our planned research, development and product commercialization efforts. We believe that our available cash and cash from operations will be sufficient to satisfy our liquidity requirements for at least the next 12 months and beyond. If our available cash resources and anticipated cash flow from operations are insufficient to satisfy our liquidity requirements, we may seek to sell equity or convertible debt securities, enter into a credit facility or another form of third-party funding, or seek other debt financing. However, we are subject to restrictive covenants under the Credit Agreement which restrict our ability to incur additional debt. Any failure to raise the funds necessary to support our operations may force us to delay, reduce or suspend our planned clinical trials, research and development programs, or other commercialization efforts.

To the extent that we raise additional capital through the sale of equity or convertible debt securities, your ownership may be diluted, and the terms of these securities may include liquidation or other preferences that adversely affect your rights as a shareholder. Debt financing, if available, may involve agreements that include

Table of Contents

covenants limiting or restricting our ability to take certain actions, such as incurring additional debt, making capital expenditures or declaring dividends.

If we raise additional funds through collaborations, strategic collaborations or partnership, or marketing, distribution or licensing arrangements with third parties, we may be required to do so at an earlier stage than would otherwise be ideal and/or may have to limit valuable rights to our intellectual property, technologies, products, or future revenue streams, or grant licenses or other rights on terms that are not favorable to us. Furthermore, any additional fundraising efforts may divert our management from their day-to-day activities, which may adversely affect our ability to develop and commercialize our products.

Our business depends on maintaining our brand and ongoing customer demand for our products and services, and a significant reduction in sentiment or demand could affect our results of operations.

Our success depends on the reputation of our brands, which depends on factors such as the safety and quality of our products, our communication activities, including marketing and education efforts, and our management of our customer experience. Maintaining, promoting and positioning our brands is important to expanding our customer base. This will depend largely on the success of our education and marketing efforts and our ability to provide a consistent, high-quality customer experience.

We may need to make substantial investments in the areas of education and marketing in order to maintain and enhance our brands. Ineffective marketing, negative publicity, significant discounts by our competitors, product defects and related liability litigation, failure to obtain regulatory clearance for our products, counterfeit products, unfair labor practices and failure to protect the intellectual property rights in our brands are some of the potential threats to the strength of our business. To protect our brands’ status, we may need to make substantial expenditures to mitigate the impact of such threats.

We believe that maintaining and enhancing our brands in the countries in which we currently sell our products, and in new countries where we have limited brand recognition, is important to expanding our customer base. If we are unable to maintain or enhance the strength of our brands in the countries in which we currently sell our products and in new countries, then our growth strategy could be adversely affected.

If we fail to compete effectively against our competitors, many of whom have greater resources than we have, our revenues and results of operations may be negatively affected.

Alternatives exist for Motiva Implants and for our other products, and we will likely face competition with respect to any planned products that we may seek to develop or commercialize in the future from major pharmaceutical companies, specialty pharmaceutical companies, medical device companies and biotechnology companies worldwide. There are several large pharmaceutical and biotechnology companies that currently market silicone breast implants. We also face competition from manufacturers of saline-filled breast implants, and we see emerging competition from non-implant breast augmentation techniques such as hyaluronic acid injection and novel fat grafting methodologies. Any of these may present competitive barriers to Motiva Implants.

Our leading competitors are large, multi-national companies with significant resources and capabilities. Three of these companies, Sientra, Inc., Mentor Worldwide LLC (a division of Johnson & Johnson), and Allergan plc (recently acquired by AbbVie Inc.), have conducted large prospective clinical studies that started in the United States in 2002, 2000 and 1998, respectively, and they use this data extensively to promote their products. This can put us at a disadvantage when promoting our products to physicians and patients, even outside the United States. In addition, the significant financial and staff resources and brand recognition that our competitors possess mean they may be able to compete with us regardless of the differentiating features of our products. If we are not successful in capturing market share, even outside the United States, or if physicians or patients do not perceive our products to be safer or more favorable, our revenues and/or our operating margins may be significantly impaired.

In addition, manufacturers of competitive products may reduce prices for their competing products in an effort to gain or retain market share and undermine the value proposition that Motiva Implants might otherwise be able to offer to customers. Potential competitors also include academic institutions, government agencies and other public and private research organizations that conduct research, seek patent protection and establish collaborative arrangements for research, development, manufacturing and commercialization. These competitors may develop new technologies that are superior to our products or replace silicone.

Smaller or early-stage companies may also prove to be significant competitors, particularly through collaborative arrangements with large and established companies. These third parties may compete with us in recruiting and

Table of Contents

retaining qualified technical and management personnel, establishing clinical study sites and patient registrations for clinical studies, as well as in acquiring technologies complementary to, or necessary for, our programs.

Pricing pressure from customers and our competitors may impact our ability to sell our products at prices necessary to support our current business strategies and future expansion.

The industry environment for silicone implants and complementary products in certain international markets is price sensitive. In these markets, or in the United States if we are successful in obtaining the required regulatory approval to sell in the U.S. market, our competitors may adopt aggressive pricing strategies to intensify the competitive pricing pressure for breast implants. If we are not successful in educating customers or third-party payors on the differentiation of our Motiva Implants as compared to our competitors’ products, customers may choose our competitors’ products. Additionally, as more competitors introduce products that compete with ours, we may face additional pricing pressure that would adversely impact our future results.

We expect to significantly increase the size of our organization; as a result, we may encounter difficulties in managing our growth, which could disrupt our operations and/or increase our net losses.

As of June 30, 2022, we had 851 employees. Unless it is necessary for us to make reductions to our workforce as a cost management strategy due to the impact of the global COVID-19 pandemic or broader macroeconomic conditions on our business, over the next several years, we expect to experience significant growth in the number of our employees and the scope of our operations, principally in the areas of manufacturing, regulatory affairs, clinical and sales and marketing, and particularly as we prepare our operations in the anticipation of obtaining approval from the FDA to commercialize our Motiva Implants in the United States. We also intend to continue to improve our operational, financial and management controls, reporting systems and procedures, which may require additional personnel. Such growth could place a strain on our administrative and operational infrastructure, and/or our managerial abilities, and we may not be able to make improvements to our management information and control systems in an efficient or timely manner. We may discover deficiencies in existing systems and controls.

Many of these employees will be in countries outside of our corporate headquarters, which adds additional complexity. To manage our anticipated future growth, we must continue to implement and improve our managerial, operational and financial systems, expand our facilities and continue to recruit and train additional qualified personnel. We may not be able to effectively manage these activities. The physical expansion of our operations may lead to significant costs and may divert our management and business development resources. Future growth would impose significant added responsibilities on members of management, including:

•managing our clinical trials effectively, which we anticipate being conducted at numerous clinical sites;

•identifying, recruiting, maintaining, motivating and integrating additional employees with the expertise and experience we will require, in multiple countries;

•managing our internal development efforts effectively while complying with our contractual obligations to licensors, licensees, contractors and other third parties;

•managing additional relationships with various distributors, suppliers, and other third parties;

•improving our managerial, development, operational and finance reporting systems and procedures; and

•expanding our facilities.

Our failure to accomplish any of these tasks could prevent us from growing successfully. Any inability to manage growth could delay the execution of our business plans or disrupt our operations. We may also be exposed or subject to additional unforeseen or undisclosed liabilities as well as increased levels of indebtedness.

In certain large markets, we engage in direct sales efforts. We may fail to maintain and develop our direct sales force, and our revenues and financial outcomes could suffer as a result. Furthermore, our direct sales personnel may not effectively sell our products.

We have established a direct sales force for our business in Brazil, and we have implemented a direct sales strategy in several European countries. We have hired and will need to retain and motivate a significant number of sales and marketing personnel in order to support our anticipated growth in these countries. There is significant competition for quality personnel experienced in such activities, including from companies with greater financial resources than ours. If we are not successful in our efforts to continue recruiting, retaining, and motivating such

Table of Contents

personnel, we may not be able to increase our revenues, or we may increase our expenses in greater measure than our revenues, negatively impacting our operating results.

We are also working on creating a direct sales structure and strategy in certain markets. We are working to put in place the correct legal and business structures to comply with taxation and operational requirements. These structures may not ultimately be implemented or, if implemented, be successful or effective and may not be able to increase our revenues or improve our gross margins. In addition, our expenses or tax related costs may increase in greater measure than our revenues, negatively impacting our operating results.

We may be subject to substantial warranty or product liability claims or other litigation in the ordinary course of business that may adversely affect our business, financial condition and operating results.

We face an inherent risk of product liability exposure related to the sale of Motiva Implants and any planned products in clinical studies. The marketing, sale and use of Motiva Implants and our planned products could lead to the filing of product liability claims against us if someone alleges that our products failed to perform as designed or caused significant adverse events in patients. We may also be subject to liability for a misunderstanding of, or inappropriate reliance upon, the information we provide. If we cannot successfully defend ourselves against claims that Motiva Implants or our planned products caused injuries, we may incur substantial liabilities. Regardless of merit or eventual outcome, liability claims may result in:

•decreased demand for any planned products we may develop;

•injury to our reputation and significant negative media attention;

•withdrawal of patients from clinical studies or cancellation of studies;

•significant costs to defend the related litigation and distraction to our management team;

•substantial monetary awards to plaintiffs;

•loss of revenue; and

•the inability to commercialize any products that we may develop.

We currently hold $25 million in product liability insurance coverage, which may not be adequate to cover all liabilities we may incur. Insurance coverage is increasingly expensive. We may not be able to maintain insurance coverage at a reasonable cost or in an amount adequate to satisfy any liability that may arise.

Counterfeit products may be represented as ours, which could compete with our genuine products and may also expose us to risks associated with adverse events and product liability.

We routinely see counterfeit versions of our major competitor’s branded products in the marketplace, and we have recently become aware of potential counterfeiting of our Motiva Implants. This is particularly common in emerging markets, where sensitivity to price is higher and regulatory enforcement is under-resourced. These counterfeit products are typically manufactured with significantly lower quality than the products they are claimed to be, and in some cases may be manufactured with silicones that are not medical grade. They may expose patients to significant adverse event risks, and there is a risk that certain adverse events with counterfeit products may be attributed to our genuine products. This could reduce demand for our products, result in negative publicity, or otherwise impact our business and the price of our shares.

Negative publicity concerning our products or our competitors’ products, including due to product defects and any resulting litigation, could harm our reputation and reduce demand for silicone breast implants, either of which could adversely impact our financial results and/or share price.

The silicone breast implant industry has been the focus of significant regulatory and media scrutiny. Silicone breast implants were removed from the U.S. marketplace for a period in the 1990s and 2000s related to safety concerns. Certain patient advocacy groups exist to publicize real and perceived health risks associated with silicone breast implants and plastic surgery generally. Recently, some breast implant patients have begun to self-identify and report various symptoms that they believe are related to their breast implants; they refer to these symptoms as Breast Implant Illness, or BII, but BII is not an official medical diagnosis. Additionally, the activities of legislative bodies, regulatory agencies, physician organizations, and other groups may lead to publicity around the real and perceived risks to patients from silicone implants. The responses of potential patients, physicians, the news media, legislative and regulatory bodies and others to information about complications or alleged complications of our products or our competitors’ products, or products liability litigation against us or our

Table of Contents

competitors, could materially reduce market acceptance and patient demand for our products, or could, even in the absence of a change in demand, negatively impact our business and reputation and negatively impact our financial condition, results of operations or the market price of our common shares. In addition, activity of this type could result in an increase in the number or size of product liability claims, which would adversely affect our business, financial results, and/or the price of our shares.

Recent news coverage has called into question the long-term safety of breast implants and reports of breast implant-associated anaplastic large cell lymphoma (BIA-ALCL) linked to our competitors’ products which have led to regulatory actions regarding macrotextured devices in several countries and the worldwide recall of one of our competitor’s macrotextured implants and tissue expanders. These events may lead to a reduction in the demand for silicone breast implants and could adversely affect our business.

Women with breast implants have reported higher rates, as compared to the general population, of BIA-ALCL, an uncommon type of cancer affecting cells of the immune system. In January 2011, the FDA indicated that there was a possible association between certain saline and silicone gel-filled breast implants and higher rates of BIA-ALCL, with the causal links neither yet understood nor confirmed. In March 2015, France’s National Cancer Institute, or NCI, noted that there is a clearly established link between ALCL and certain breast implants, which is referred to as breast implant-associated ALCL, or BIA-ALCL. The NCI noted in that report that most of the reported cases occurred in women with textured implants.

In August 2017, the FDA updated its advisory on BIA-ALCL and subsequently requested all breast implant manufacturers to revise their physician and patient labeling with the most current information. The August 2017 update described BIA-ALCL as “rare” and stated “we have strengthened our understanding of this condition and concur with the World Health Organization designation of BIA-ALCL as a rare T-cell lymphoma that can develop following breast implants. The exact number of cases remains difficult to determine due to significant limitations in world-wide reporting and lack of global implant sales data. At this time, most data suggest that BIA-ALCL occurs more frequently following implantation of breast implants with textured surfaces rather than those with smooth surfaces.” The FDA noted it does not recommend prophylactic breast implant removal in a patient without symptoms or other abnormalities.

In March 2018, the FDA further updated its advisory on BIA-ALCL stating “we are reporting that we are aware of 414 total cases of BIA-ALCL. Additionally, studies reported in medical literature estimate that the lifetime risk of developing BIA-ALCL for patients with textured breast implants ranges from 1 in 3,817 to 1 in 30,000.” The FDA noted that the update did not change the agency’s recommendation and that choosing to obtain a breast implant is a personal decision that patients and providers should make with the most complete information available. In the fourth quarter of 2018, following the non-renewal of its textured breast implant CE Mark licenses in Europe, Allergan plc suspended sales of textured breast implants in Europe and withdrew its remaining textured breast implants on the market within Europe.

On February 6, 2019, the FDA further reported that as of September 2018, the agency had received a total of 660 total medical device reports regarding BIA-ALCL cases since 2010. Of the 660 reports, the FDA’s analysis suggested that there are 457 unique cases of BIA-ALCL, including nine patient deaths. Additionally, on February 12, 2019, Health Canada confirmed that as of January 1, 2019, it had received reports of 22 confirmed and 22 suspected Canadian cases of BIA-ALCL and that it would be updating its safety review of BIA-ALCL in Spring 2019. In April 2019, the Agence Nationale de Securite du Medicament et des Produits de Sante, or ANSM, the regulatory authority in France, announced that 59 cases of BIA-ALCL had been reported in France since 2011 and banned several types of macrotextured and polyurethane implants linked to BIA-ALCL. Between February and September 2019, authorities from Australia, Colombia, Canada, South Korea and Singapore announced similar bans.

In July 2019, the FDA requested that Allergan plc recall its Biocell® textured implants in the U.S. market and Allergan subsequently announced the global recall of its Biocell® textured breast implants and tissue expanders. In the FDA announcement, it noted that it had reviewed 573 unique cases globally of BIA-ALCL, including 33 patient deaths, of which 12 of the 13 known deaths were attributed to Biocell® implants. The FDA further noted that it will continue to monitor the incidence of BIA-ALCL across other textured and smooth breast implants and tissue expanders as well as other devices intended for use in the breast. The FDA subsequently identified the recall as a Class I recall in September 2019 and stated that use of the recalled devices may cause serious injuries

Table of Contents

and death. As the BIA-ALCL risk continues to become more highly publicized, this could have a significant negative impact on demand for breast implants globally, including our Motiva Implants.

In September 2020, the FDA released finalized guidance on breast implant labeling recommendations, including the addition of a boxed warning, a patient decision checklist, material and device descriptions, implant rupture screening recommendations and a patient device card. In October 2021, the FDA took several additional actions to strengthen breast implant risk communication, including restricting the sale and distribution of breast implants to only health care providers and facilities that provide information to patients using the patient decision checklist. The FDA also approved new labeling for all legally marketed breast implants that includes a boxed warning, a patient decision checklist, updated silicone gel-filled breast implant rupture screening recommendations, a device description with a list of specific materials, and a patient device card.

In August 2020, the FDA updated its analysis of medical device reports of breast implant illness and breast implant associated lymphoma. In this update, the FDA updated the table on the agency’s BIA-ALCL webpage to include a total of 733 unique cases and 36 patient deaths globally as of January 5, 2020, which reflect an increase of 160 new cases and 3 deaths since the early-July 2019 update.

We do not produce the types of rough textured implants that have been involved in these reports. To date, no cases of BIA-ALCL have been reported in patients with Motiva Implants. Furthermore, there have been no reported cases of BIA-ALCL in patients with smooth implants with no history of previously having a textured device. Future clinical studies or clinical experience may indicate that breast implants expose potentially genetically predisposed patients to greater risks of BIA-ALCL, which may reduce demand for silicone implants generally, expose us to product liability claims, as well as to class actions and other lawsuits. These impacts may occur in the absence of any specific linkage with our products. Moreover, if cases of BIA-ALCL or other complications are discovered in the future and/or are reported in patients with Motiva Implants, we could be subject to mandatory product recalls, suspension or withdrawal of our regulatory licensure for sale in one or more countries, and significant legal liability. Any of these may have an adverse effect on our business or operating results, or a negative impact on our share price.

The loss of members of our executive management team or other employees, or other turnover in our management team, could adversely affect our business.

Our success in implementing our business strategy depends largely on the skills, experience and performance of members of our executive management team and other key employees, including Juan José Chacón Quirós, our Chief Executive Officer, Roberto de Mezerville, our Chief Technology Officer, Rajbir Denhoy, our Chief Financial Officer, and Pratip Dastidar, our Head of Global Operations. The collective efforts of each of these persons, and others working with them as a team, are critical as we continue to develop our tests and technologies and pursue our research and development and sales programs. In addition, we have experienced significant changes in our executive leadership in the past twelve months, including in our Chief Financial Officer and Chief Operating Officer positions. As a result of the difficulty in locating qualified new management and other key employees, the loss or incapacity of existing members of our executive management team could adversely affect our operations. If we were to lose one or more key employees, we could experience difficulties in finding qualified successors, competing effectively, developing our technologies and implementing our business strategy. In addition, changes to strategic or operating goals, which can often times occur with the appointment of new executives and directors, can create uncertainty, may negatively impact our ability to execute quickly and effectively, and may ultimately be unsuccessful. Executive leadership transition periods are often difficult as the new executives gain detailed knowledge of our operations, and friction can result from changes in strategy and management style. Management turnover inherently causes some loss of institutional knowledge, which can negatively affect strategy and execution. We do not have “key person” life insurance on our senior executives, and the loss of any of the key team members would have a negative impact to our business and financial results. In addition, the job market in Costa Rica and other locations in which we operate has recently become more competitive and we are competing for talent with major multinational corporations which have significantly more resources than us, and we may find new difficulties in retaining our most talented employees.

In addition, we rely on collaborators, consultants and advisors, including scientific and clinical advisors, to assist us in formulating our research and development and commercialization strategy. Our collaborators, consultants and advisors are generally employed by employers other than us and may have commitments under agreements with other entities that may limit their availability to us.

Table of Contents

We continue to incur significant costs as a result of operating as a public company, and our management is required to devote substantial time to new compliance initiatives.

As a public company, we incur significant legal, accounting and other expenses that we did not incur as a private company. We are subject to the reporting requirements of the Exchange Act, the other rules and regulations of the Securities and Exchange Commission, or SEC, and the rules and regulations of Nasdaq. The expenses that are required in order to adequately prepare for being a public company are material, and compliance with the various reporting and other requirements applicable to public companies require considerable time and attention of management. For example, the Sarbanes-Oxley Act and the rules of the SEC and national securities exchanges have imposed various requirements on public companies, including requiring establishment and maintenance of effective disclosure and financial controls. Our management and other personnel devote a substantial amount of time to these compliance initiatives. These rules and regulations continue to increase our legal and financial compliance costs and make some activities more time-consuming and costly. For example, these rules and regulations make it more difficult and more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced policy limits on coverage or incur substantial costs to maintain the same or similar coverage. The impact of these events could also make it more difficult for us to attract and retain qualified personnel to serve on our Board of Directors, our board committees, or as executive officers.

The Sarbanes-Oxley Act requires, among other things, that we maintain effective internal control over financial reporting and disclosure controls and procedures. In particular, we must perform system and process evaluation and testing of our internal control over financial reporting to allow management to report on the effectiveness of our internal control over financial reporting, as required by Section 404 of the Sarbanes-Oxley Act. In addition, we are required to have our independent registered public accounting firm attest to the effectiveness of our internal control over financial reporting. Our compliance with Section 404 of the Sarbanes-Oxley Act requires that we incur substantial accounting expense and expend significant management efforts. We currently do not have an internal audit group, and we will need to hire additional accounting and financial staff with appropriate public company experience and technical accounting knowledge. If we are not able to comply with the requirements of Section 404 in a timely manner, including remediation of deficiencies in our internal control over financial reporting that were deemed to be material weaknesses as of December 31, 2021, or if we or our independent registered public accounting firm in the future identify any other weaknesses in our internal control over financial reporting, the market price of our shares could decline and we could be subject to sanctions or investigations by Nasdaq, the SEC or other regulatory authorities, which would require additional financial and management resources.

Our ability to successfully implement our business plan and comply with Section 404 requires us to be able to prepare timely and accurate financial statements. We expect that we will need to continue to improve existing, and implement new operational and financial systems, procedures and controls to manage our business effectively. Any delay in the implementation of, or disruption in the transition to, new or enhanced systems, procedures or controls, including in connection with the remediation of the material weakness in our internal control over financial reporting as of December 31, 2021, may cause our operations to suffer and we may be unable to conclude that our internal control over financial reporting is effective and to obtain an unqualified report on internal controls from our auditors as required under Section 404 of the Sarbanes-Oxley Act. This, in turn, could have an adverse impact on trading prices for our common shares, and could adversely affect our ability to access the capital markets.

We have made multiple acquisitions in the past, and in the future we may acquire other businesses or form joint ventures or make investments in other companies or technologies. If we are not successful in integrating these businesses, as well as identifying and controlling risks associated with the past operations of these businesses, we may incur significant costs, receive penalties or other sanctions from various regulatory agencies, and/or incur significant diversions of management time and attention.

We believe our business growth will be enhanced if we continually seek opportunities to enhance and broaden our product offerings. As part of our business strategy, we may pursue acquisitions or licenses of assets, or acquisitions of businesses. We also may pursue strategic alliances and joint ventures that leverage our core technology and industry experience to expand our product offerings or sales and distribution resources. We have acquired companies and/or assets and licensed assets in a variety of countries, including Brazil and several European countries.

We may do more of these types of transactions in the future and may also form strategic alliances and joint ventures. We may not be able to find suitable partners or acquisition candidates, and we may not be able to complete such transactions on favorable terms, if at all. If we make any acquisitions, we may not be able to

Table of Contents

integrate these acquisitions successfully into our existing business, and we could assume unknown or contingent liabilities. Any future acquisitions also could result in significant write-offs or the incurrence of debt and contingent liabilities, any of which could have an adverse effect on our financial condition, results of operations and cash flows. Integration of an acquired company may also disrupt ongoing operations and require management resources that would otherwise focus on developing our existing business. We may experience losses related to investments in other companies, which could have a negative effect on our results of operations. We may not identify or complete these transactions in a timely manner, on a cost-effective basis, or at all, and we may not realize the anticipated benefits of any acquisition, license, strategic alliance or joint venture. To finance such a transaction, we may choose to issue common shares as consideration, which would dilute the ownership of our shareholders. If the price of our common shares is low or volatile, we may not be able to acquire other companies or fund a joint venture project using our shares as consideration. Alternatively, it may be necessary for us to raise additional funds for acquisitions through public or private financings. Additional funds may not be available on terms that are favorable to us, or at all.

We do not know whether we will be able to successfully integrate any acquired business, product or technology. The success of any given acquisition may depend on our ability to retain any key employees related thereto, and we may not be successful at retaining or integrating such key personnel. Integrating any business, product or technology we acquire could be expensive and time-consuming, disrupt our ongoing business, impact our liquidity, and/or distract our management. If we are unable to integrate any acquired businesses, products or technologies effectively, our business may suffer. Whether as a result of unsuccessful integration, unanticipated costs, including those associated with assumed liabilities and indemnification obligations, negative accounting impact, or other factors, we may not realize the economic benefits we anticipate from acquisitions. In addition, any amortization or charges resulting from the costs of acquisitions could increase our expenses.

Unfavorable global economic conditions, including slower growth or recession, inflation or decreases in consumer spending power or confidence, could adversely affect our business, financial condition or results of operations.

Our results of operations could be adversely affected by general conditions in the global economy and in the global financial markets, such as slower growth or recession, inflation or decreases in consumer spending or confidence. A severe or prolonged economic downturn, could result in a variety of risks to our business, including general economic pressure on our customers’ patients. Elective aesthetic procedures, including breast augmentation, are typically not covered by insurance and are less of a priority than other items for those patients that have lost their jobs, are furloughed, have reduced work hours or have to allocate their cash to other priorities. As a result, adverse changes in the economy, including as a result of current inflationary pressures, may cause consumers to reassess their spending choices and reduce demand for elective aesthetic procedures, which could have an adverse effect on our net sales and profitability. A weak or declining economy could also strain our manufacturers or suppliers, possibly resulting in supply disruption, or cause our customers or distributors to delay making payments for our products. Any of the foregoing could harm our business and we cannot anticipate all of the ways in which the economic climate and financial market conditions could adversely affect our business.

We have significant exposure to the economic and political situations in emerging market countries, and developments in these countries could materially impact our financial results, or our business more generally.

Many of the countries in which our products are sold are emerging markets. Our global growth strategy contemplates the expansion of our existing sales activities in Latin America, Europe, the Middle East, and Asia-Pacific region as well as North America. Our exposure to emerging markets has increased in recent years, as have the number and importance of our distributor arrangements. Economic and political developments in Brazil and other emerging markets, including economic crises, currency inflation, or political instability, have had in the past, and may have in the future, a material adverse effect on our financial condition and results of operations. Moreover, as these markets continue to grow, competitors may seek to enter these markets and existing market participants will likely try to aggressively protect or increase their market shares. Increased competition may result in price reductions, reduced margins and our inability to gain or hold market share, which could have an adverse effect on our financial condition and results of operations.

Our results of operations could be affected by fluctuations in currency rates.

We present our results of operations in U.S. dollars, which is our reporting currency. However, as of December 31, 2021, the majority of our revenues are denominated in currencies other than the U.S. dollar - primarily the euro, the Brazilian real, and the British pound. As of December 31, 2021, the majority of our expenses are denominated

Table of Contents

in U.S. dollars or in Costa Rican colones, which are linked to the U.S. dollar. In the future, we expect to have significant revenues and expenses denominated in these non-U.S. currencies. As such, unfavorable fluctuations in currency exchange rates have had, and in the future could continue to have, an adverse effect on our results of operations.

Because our consolidated financial statements are presented in U.S. dollars, we must translate revenues, expenses and income, as well as assets and liabilities, into U.S. dollars at exchange rates in effect during or at the end of each reporting period. Therefore, changes in the value of the U.S. dollar in relation to the British pound, the euro, and the Brazilian real will affect our revenues, operating income and the value of balance sheet items originally denominated in other currencies. These changes would cause our growth in consolidated earnings stated in U.S. dollars to be higher or lower than our growth in local currency when compared against other periods. We do not currently engage in currency hedging arrangements to protect us from fluctuations in the exchange rates of the euro and other currencies in relation to the U.S. dollar (and/or from inflation of such currencies), and we are exposed to material adverse effects from such movements. We cannot predict any future trends in rates of inflation or exchange rates of other currencies against the U.S. dollar, and there can be no assurance that any contractual provisions will offset their impact, or that any future currency hedging activities will be successful.

Continued international expansion of our business will expose us to business, regulatory, political, operational, financial and economic risks associated with doing business internationally.

Our products are commercially available in more than 80 countries, and we operate subsidiaries in the United States, Costa Rica, Brazil, and several European countries. Our business strategy contemplates continued international expansion, including partnering with medical device distributors, and introducing Motiva Implants and other planned products outside the United States. The sale and shipment of our products internationally, as well as the purchase of components from international sources, subjects us to potential trade, import and export, and customs regulations and laws.

Compliance with these regulations and laws is costly and exposes us to penalties for non-compliance. Any failure to comply with applicable legal and regulatory obligations could impact us in a variety of ways that include, but are not limited to, significant criminal, civil and administrative penalties, including imprisonment of individuals, fines and penalties, denial of export or import privileges, seizure of shipments, restrictions on certain business activities and exclusion or debarment from government contracting. Also, the failure to comply with applicable legal and regulatory obligations could result in the disruption of our shipping, marketing and sales activities.

In addition, several of the countries in which we sell our products or conduct our operations are, to some degree, subject to political, economic or social instability. Doing business in Costa Rica and other countries outside the United States involves a number of other risks, including:

•compliance with the free zone regime regulations under which the manufacturing sites operate;

•different regulatory requirements for device approvals in international markets;

•multiple, conflicting and changing laws and regulations such as tariffs and tax laws, export and import restrictions, employment laws, regulatory requirements and other governmental approvals, permits and licenses;

•potential failure by us or our distributors to obtain and/or maintain regulatory approvals for the sale or use of our products in various countries;

•difficulties in managing global operations;

•logistics and regulations associated with shipping products, including infrastructure conditions and transportation delays;

•limits on our ability to penetrate international markets if our distributors do not execute successfully;

•governmental price controls, differing reimbursement regimes and other market regulations;

•financial risks, such as longer payment cycles, difficulty enforcing contracts and collecting accounts receivable, and exposure to currency exchange rate fluctuations;

•reduced protection for intellectual property rights, or lack of them in certain jurisdictions, forcing more reliance on our trade secrets, if available;

Table of Contents

•economic weakness, political and economic instability, including wars, terrorism and political unrest, outbreak of disease, boycotts, curtailment of trade and other business restrictions;

•the British exit from the EU, including with respect to its effect on the value of the British pound relative to other currencies;

•failure to comply with the Foreign Corrupt Practices Act, including its books and records provisions and its anti-bribery provisions, by maintaining accurate information and control over sales activities and distributors’ activities;

•failure to comply with restrictions on the ability of companies to do business in foreign countries, including restrictions on foreign ownership of telecommunications providers imposed by the U.S. Office of Foreign Assets Control;

•unexpected changes in tariffs, trade barriers and regulatory requirements;

•compliance with tax, employment, immigration and labor laws;

•taxes, including withholding of payroll taxes;

•currency fluctuations, which could result in increased operating expenses and reduced revenue, and other obligations incident to doing business in another country;

•workforce uncertainty in countries where labor unrest is more common than in the United States;

•production shortages resulting from any events affecting raw material supply or manufacturing capabilities abroad; and

•business and shipping interruptions resulting from natural or other disasters including earthquakes, volcanic activity, hurricanes, floods and fires.

Any of these risks, if encountered, could harm our future international expansion and operations and, consequently, have an adverse effect on our financial condition, results of operations and cash flows.

Any disruption at our existing facilities could adversely affect our business and operating results.

Our headquarters are located in Costa Rica, and all of our main manufacturing activities are conducted in two ISO-13485 and GMP compliant manufacturing facilities in Costa Rica through Establishment Labs, S.A. Despite our efforts to maintain and safeguard our manufacturing facilities, including acquiring insurance and adopting maintenance and health and safety protocols, vandalism, terrorism or a natural or other disaster, such as earthquake, volcanic activity, fire or flood, could damage or destroy our inventory of finished goods, cause substantial delays in our operations and manufacturing, result in the loss of key information and cause us to incur additional expenses. Our insurance may not cover our losses in any particular case. In addition, regardless of the level of insurance coverage, damage to our facilities may have an adverse effect on our business, financial condition and results of operations.

Fluctuations in insurance costs and availability, and future insurance requirements could adversely affect our profitability or our risk management profile.

We hold a number of insurance policies, including product liability insurance, directors’ and officers’ liability insurance, general liability insurance, property insurance and workers’ compensation insurance. If the costs of maintaining adequate insurance coverage increase significantly in the future, our operating results could be adversely affected. Likewise, if any of our current insurance coverage should become unavailable to us or become economically impractical, we would be required to operate our business without indemnity from commercial insurance providers. If we operate our business without insurance, we could be responsible for paying claims or judgments against us that would have otherwise been covered by insurance, which would adversely affect our results of operations or financial condition.

Risks Related to Manufacturing and Other Third-Party Relationships

Our operations involve hazardous materials and we and third parties with whom we contract must comply with environmental laws and regulations, which can be expensive and restrict how we do business, and could expose us to liability if our use of such hazardous materials causes injury.

Our manufacturing processes currently require the controlled use of potentially harmful chemicals, including highly flammable solvents. We cannot eliminate the risk of accidental contamination or injury to employees or third

Table of Contents

parties from the use, storage, handling or disposal of these materials. In the event of contamination or injury, we could be held liable for any resulting damages, and any liability could exceed our resources or any applicable insurance coverage we may have. Additionally, we are subject to, on an ongoing basis, federal, state and local laws and regulations governing the use, storage, handling and disposal of these materials and specified waste products. These are particularly stringent in California, where NuSil, one of our key suppliers, is located. The cost of compliance with these laws and regulations may become significant and could have an adverse effect on our financial condition, results of operations and cash flows. In the event of an accident or if we otherwise fail to comply with applicable regulations, we could lose our permits or approvals or be held liable for damages or penalized with fines.

We rely on third parties to conduct certain components of our clinical studies, and those third parties may not perform satisfactorily, including failing to meet deadlines for the completion of such studies, which could interfere with or delay our ability to get regulatory approval or commercialize our products.

We rely on third parties, such as contract research organizations, or CROs, clinical data management organizations, medical institutions and clinical investigators, to perform various functions for our clinical trials. Our reliance on these third parties for clinical development activities reduces our control over these activities but does not relieve us of our responsibilities. We remain responsible for ensuring that each of our clinical studies is conducted in accordance with the general investigational plan and protocols for the study. Moreover, the International Council for Harmonization, or ICH, and the FDA require us to comply with standards, commonly referred to as good clinical practices, for conducting, recording and reporting the results of clinical studies to ensure that data and reported results are credible and accurate and that the rights, integrity and confidentiality of patients in clinical studies are protected. Furthermore, these third parties may also have relationships with other entities, some of which may be our competitors. If these third parties do not successfully carry out their contractual duties, meet expected deadlines or conduct our clinical studies in accordance with regulatory requirements or our stated protocols, we will not be able to obtain, or may be delayed in obtaining, regulatory approvals for our planned products and will not be able to, or may be delayed in our efforts to, successfully commercialize our planned products.

We rely on a single-source, third-party supplier for medical-grade long-term implantable silicone, which is the primary raw material used in our Motiva Implants. If this supplier were to increase prices for this raw material over time or experience interruptions in its ability to supply us with this raw material, our business, financial condition and results of operations could be adversely affected.

We rely on NuSil, as the sole supplier of medical-grade silicone used in our Motiva Implants as well as other products that we manufacture under contract to other customers. To our knowledge, NuSil is the only supplier of such raw materials with the appropriate filings with the FDA and other regulatory bodies to enable the manufacturing of products with our requirements. NuSil supplies our major competitors with raw material as well, and at least two of these are larger-volume customers of NuSil than we are.

If NuSil becomes unable or unwilling to supply sufficient quantities of medical-grade silicone of the specifications required for our products, we may not be able to replace this supply source quickly, or at all. Similarly, they may become unable or unwilling to manufacture our needed raw materials in compliance with regulatory requirements, or their manufacturing facilities may not be able to maintain compliance with regulatory requirements. Any replacement supplier would have to be qualified with the relevant regulatory authorities, which is an expensive and time-consuming process during which we may experience an interruption in our manufacturing operations. We may also be unsuccessful in negotiating favorable terms with such a supplier. Any of these contingencies would likely affect the financial results of our operations and may have a negative impact on our share price. In particular, if we are not able to establish a replacement vendor for our medical-grade silicone, we would be unable to manufacture our Motiva Implants as well as other products that we manufacture under contract to other customers until such time as a replacement vendor is identified, which would likely significantly affect the financial results of our operations and have a significantly negative impact on our share price.

In addition, our relationship with NuSil involves other risks, including but not limited to the following:

•it may not be able, or willing, to manufacture silicone raw materials with our agreed-upon specifications;

•it may not be able, or willing, to manufacture our needed raw materials in compliance with regulatory requirements, or our its manufacturing facilities may not be able to maintain compliance with regulatory requirements;

Table of Contents

•it may not be able to supply sufficient quantities of each raw material quickly enough for us to respond to rapid increases in demand;

•it may unintentionally convey information to our competitors that is helpful in understanding our proprietary compositions and other trade secrets of our manufacturing processes;

•we may be subject to price fluctuations if we fail to meet certain minimum order requirements, or if our existing contract expires or is renegotiated;

•it may lose access to critical services and components, resulting in interruption in manufacture or shipment of medical-grade silicone;

•its facilities may be affected by earthquakes, wildfires, mud slides or other natural disasters, which could delay or impede production of our raw materials;

•we may be required to obtain regulatory approvals related to any change in our supply chain;

•NuSil may wish to discontinue supply of products to us due to its existing relationships with our competitors;

•NuSil may stop supply and claim ownership of intellectual property on materials associated with future products; and

•NuSil or its parent entity may encounter financial or other hardships unrelated to our demand for products, which could negatively impact their ability to fulfill our orders and support our regulatory approvals.

Various factors outside our direct control, including the reliance on single-source suppliers, may adversely affect manufacturing and supply of our Motiva Implants and other products.

We currently manufacture Motiva Implants at our facilities in the Coyol Free Zone, Alajuela, Costa Rica, under the multi-country MDSAP protocol. Our Qid Safety Technology microtransponders are manufactured by contract manufacturers with final testing and packaging at a manufacturing supplier facility in Regensburg, Germany, with additional inspection of the units at our facilities in Coyol, Costa Rica, prior to approval for inclusion in Motiva Implants. If demand for our current products and our planned products increases more rapidly than we anticipate, or if we secure regulatory approval to commercialize our products in additional geographies, we will need to either expand our manufacturing capabilities or outsource to other manufacturers. The manufacture of these products in compliance with ISO standards and the FDA’s regulations requires significant expertise and capital investment, including the development of advanced manufacturing techniques and process controls. Manufacturers of medical device products often encounter difficulties in production, including difficulties with production costs and yields, quality control, quality assurance testing, shortages of qualified personnel, as well as compliance with strictly enforced FDA requirements, other federal and state regulatory requirements, and foreign regulations.

We currently purchase components for the Qid Safety Technology microtransponders under purchase orders and do not have long-term contracts with most of the suppliers of the materials included in these products. We rely on NuSil as the sole supplier of medical-grade silicone used in our Motiva Implants as well as other products that we manufacture under contract to other customers. See the risk factor above titled “We rely on a single-source, third-party supplier for medical-grade silicone, which is the primary raw material used in these products. If this supplier were to increase prices for these raw materials over time or experience interruptions in their ability to supply us with this raw material, our business, financial condition and results of operations could be adversely affected.” In addition, the suppliers of certain packaging components and the surgical tools that we sell with Motiva Implants, including the cannulas, retractors, and insertion sleeves, are all purchased by us from single-source suppliers.

If our single-source and other suppliers were to delay or stop producing our components, or if the prices they charge us were to increase significantly, or if they elected not to sell to us at all or on commercially reasonable terms, we would need to identify and initiate relationships with alternative suppliers, if possible. We could experience delays in manufacturing our products or the interruption of the availability of Motiva Implants or our other products for sale, while finding another acceptable supplier, which would impact our business, financial condition and results of operations. Even if such alternative suppliers are available on commercially reasonable terms, the changes could also result in increased costs associated with qualifying the new materials and in increased operating costs. Further, any prolonged disruption in a supplier’s operations could have a significant negative impact on our ability to manufacture and deliver products in a timely manner and as a result, our business, financial condition and results of operations could be adversely affected.

Table of Contents

The manufacturing, sterilization and distribution of our Motiva Implants and other products are technically challenging. Changes that our suppliers may make, or additional requirements from regulatory agencies, are outside of our direct control and can have an impact on our processes, on quality, and on the successful delivery of products to our customers. Mistakes and mishandling are not uncommon and can affect supply and delivery. Some of these risks include:

•failure to complete sterilization on time or in compliance with the required regulatory standards;

•transportation and import and export risk, particularly given the global nature of our supply and distribution chains;

•delays in analytical results or failure of analytical techniques that we depend on for quality control and release of products;

•natural or other disasters, labor disputes, financial distress, lack of raw material supply, issues with facilities and equipment or other forms of disruption to business operations affecting our manufacturer or its suppliers;

•latent defects that may become apparent after products have been released and that may result in a recall of such products;

•contamination of our raw materials or manufactured products; and

•inclusion of vendors of raw materials not in compliance with ISO-13485 requirements.

As referenced above in this risk factor, some of the components used in our Motiva Implants and our other products are currently single-sourced, and substitutes for these components might not be obtained easily or may require substantial redesign or manufacturing modifications related to our specifications or due to regulatory requirements. Any significant problem experienced by one of our single-source suppliers may result in a delay or interruption in the supply of components or products to us because the number of third-party manufacturers with the necessary manufacturing and regulatory expertise and facilities is limited and certification of a new supplier may be complex and time consuming. Any delay or interruption would likely lead to a delay or interruption in our manufacturing or distribution operations and/or adversely affect our ability to sell Motiva Implants. The inclusion of substitute components or products must meet our specifications and could require us to qualify the new supplier with the appropriate regulatory authorities. The added time and cost to arrange for alternative suppliers could have a material adverse effect on our business. New manufacturers of any current or planned product would be required to qualify under applicable regulatory requirements and would need to have sufficient rights under applicable intellectual property laws to the design and method of manufacturing the planned product. Obtaining the necessary FDA or international approvals or other qualifications under applicable regulatory requirements and ensuring non-infringement of third-party intellectual property rights could result in a significant interruption of supply and could require the new manufacturer to bear significant additional costs that may be passed on to us.

A substantial proportion of our sales are through exclusive distributors, and we do not have direct control over the efforts these distributors may use to sell our products. If our relationships with these third-party distributors deteriorate, or if these third-party distributors fail to sell our products or engage in activities that harm our reputation, or fail to adhere to medical device regulations, our financial results may be negatively affected.

Historically, our sales model has been to sell primarily through distributors rather than through our own sales force, with the notable exception of Brazil and several European countries where we are selling directly, but, in the future, we may utilize a hybrid sales model that includes both distributors and a direct sales effort. We believe that our reliance on distributors improves the economics of our business, as we do not carry the high fixed costs of a direct sales force in many of the countries in which our Motiva Implants are sold. If we are unable to maintain or enter into such distribution arrangements on acceptable terms, or at all, we may not be able to successfully commercialize our products in certain countries. Furthermore, distributors can choose the level of effort that they apply to selling our products relative to others in their portfolio. The selection, training, and compensation of a distributors’ sales personnel are within their control rather than our own and may vary significantly in quality from distributor to distributor.

In addition, although our contract terms require our distributors to comply with all applicable laws regarding the sale of our products, including anti-competition, anti-money laundering, and sanctions laws, we may not be able to

Table of Contents

ensure proper compliance. If our distributors fail to effectively market and sell our products in full compliance with applicable laws, our results of operations and business may suffer.

Risks Related to Intellectual Property and Data Security

If we are unable to protect the confidentiality of our trade secrets, the value of our technology could be materially adversely affected, harming our business and competitive position.

In addition to our patented technology and products, we rely upon confidential proprietary information, including trade secrets, unpatented know-how, technology and other proprietary information, to develop and maintain our competitive position. Any disclosure to or misappropriation by third parties of our confidential proprietary information could enable competitors to quickly duplicate or surpass our technological achievements, thus eroding our competitive position in the market. We seek to protect our confidential proprietary information, in part, by confidentiality agreements with our employees and our collaborators and consultants. We also have agreements with our employees and selected consultants that obligate them to assign their inventions to us. These agreements are designed to protect our proprietary information, however, we cannot be certain that our trade secrets and other confidential information will not be disclosed or that competitors will not otherwise gain access to our trade secrets, or that technology relevant to our business will not be independently developed by a person that is not a party to such an agreement. Furthermore, if the employees, consultants or collaborators that are parties to these agreements breach or violate the terms of these agreements, we may not have adequate remedies for any such breach or violation, and we could lose our trade secrets through such breaches or violations. Further, our trade secrets could be disclosed, misappropriated or otherwise become known or be independently discovered by our competitors. In addition, intellectual property laws in foreign countries may not protect trade secrets and confidential information to the same extent as the laws of the United States. If we are unable to prevent disclosure of the intellectual property related to our technologies to third parties, we may not be able to establish or maintain a competitive advantage in our market, which would harm our ability to protect our rights and have an adverse effect on our business.

If we are not able to obtain and maintain intellectual property protection for our products and technologies, or if the scope of our patents is not sufficiently broad, we may not be able to effectively maintain our market leading technology position.

Our success depends in large part on our ability to obtain and maintain patent and other intellectual property protection in the United States and in other countries with respect to our proprietary technology and products.

The patent position of medical device and diagnostic companies generally is highly uncertain and involves complex legal and factual questions for which legal principles remain unresolved. In recent years, patent rights have been the subject of significant litigation. As a result, the issuance, scope, validity, enforceability and commercial value of the patent rights we rely on are highly uncertain. Pending and future patent applications may not result in patents being issued which protect our technology or products or which effectively prevent others from commercializing competitive technologies and products. Changes in either the patent laws or interpretation of the patent laws in the United States and other countries may diminish the value of the patents we rely on or narrow the scope of our patent protection. The laws of other countries may not protect our rights to the same extent as the laws of the U.S. Publications of discoveries in the scientific literature often lag behind the actual discoveries, and patent applications in the United States and other jurisdictions are typically not published until 18 months after filing, or in some cases not at all. Therefore, we cannot be certain that we were the first to make the inventions claimed in our patents or pending patent applications, or that we or were the first to file for patent protection of such inventions.

Even if the patent applications we rely on issue as patents, they may not issue in a form that will provide us with any meaningful protection, prevent competitors from competing with us or otherwise provide us with any competitive advantage. Our competitors may be able to circumvent our patents by developing similar or alternative technologies or products in a non-infringing manner. The issuance of a patent is not conclusive as to its scope, validity or enforceability, and the patents we rely on may be challenged in the courts or patent offices in the United States and abroad. Such challenges may result in patent claims being narrowed, invalidated or held unenforceable, which could limit our ability to stop or prevent us from stopping others from using or commercializing similar or identical technology and products, or limit the duration of the patent protection of our technology and products. Given the amount of time required for the development, testing and regulatory review of new planned products, patents protecting such products might expire before or shortly after such products are

Table of Contents

commercialized. As a result, our patent portfolio may not provide us with sufficient rights to exclude others from commercializing products similar or identical to ours or otherwise provide us with a competitive advantage.

We may not be able to protect or enforce our intellectual property rights throughout the world.

Filing, prosecuting and defending patents on all of our planned products throughout the world may be prohibitively expensive to us. Competitors may use our technologies in jurisdictions where we have not obtained patent protection to develop their own products and, further, may export otherwise infringing products to territories where we have patent protection but where enforcement is not as strong as in the United States. These products may compete with our products in jurisdictions where we do not have any issued patents and our patent claims or other intellectual property rights may not be effective or sufficient to prevent them from so competing. Many companies have encountered significant problems in protecting and defending intellectual property rights in international jurisdictions. The legal systems of certain countries, particularly certain developing countries, do not favor the enforcement of patents and other intellectual property protection, which could make it difficult for us to stop the infringement of our patents or marketing of competing products in violation of our proprietary rights generally. Proceedings to enforce our patent rights in foreign jurisdictions could result in substantial cost and divert our efforts and attention from other aspects of our business.

We may become involved in legal proceedings to protect or enforce our intellectual property rights, which could be expensive, time consuming, or unsuccessful.

Competitors may infringe or otherwise violate the patents we rely on, or our other intellectual property rights. To counter infringement or unauthorized use, we may be required to file infringement claims, which can be expensive and time-consuming. Any claims that we assert against perceived infringers could also provoke these parties to assert counterclaims against us alleging that we infringe their intellectual property rights. In addition, in an infringement proceeding, a court may decide that a patent we are asserting is invalid or unenforceable, or may refuse to stop the other party from using the technology at issue on the grounds that the patents we are asserting do not cover the technology in question. An adverse result in any litigation proceeding could put one or more patents at risk of being invalidated or interpreted narrowly. Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation, there is a risk that some of our confidential information could be compromised by disclosure during this type of litigation.

Interference or derivation proceedings provoked by third parties or brought by the U.S. Patent and Trademark Office, or USPTO, or any other patent authority may be necessary to determine the priority of inventions or other matters of inventorship with respect to patents and patent applications. We may become involved in proceedings, including oppositions, interferences, derivation proceedings, inter partes reviews, patent nullification proceedings, or re-examinations, challenging our patent rights or the patent rights of others, and the outcome of any such proceedings are highly uncertain. An adverse determination in any such proceeding could reduce the scope of, or invalidate, important patent rights, allow third parties to commercialize our technology or products and compete directly with us, without payment to us, or result in our inability to manufacture or commercialize products without infringing third-party patent rights. Our business also could be harmed if a prevailing party does not offer us a license on commercially reasonable terms, if any license is offered at all. Litigation or other proceedings may fail and, even if successful, may result in substantial costs and distract our management and other employees. We may also become involved in disputes with others regarding the ownership of intellectual property rights. If we are unable to resolve these disputes, we could lose valuable intellectual property rights.

Even if resolved in our favor, litigation or other legal proceedings relating to intellectual property claims may cause us to incur significant expenses and could distract our technical or management personnel from their normal responsibilities. In addition, there could be public announcements of the results of hearings, motions or other interim proceedings or developments and if securities analysts or investors perceive these results to be negative, it could have a substantial adverse effect on the market price of our common shares. Such litigation or proceedings could substantially increase our operating losses and reduce the resources available for development activities or any future sales, marketing or distribution activities. Uncertainties resulting from the

Table of Contents

initiation and continuation of intellectual property litigation or other proceedings could have an adverse effect on our ability to compete in the marketplace.

The medical device industry is characterized by patent litigation and we could become subject to litigation that could be costly, result in the diversion of management's time and efforts, require us to pay damages or prevent us from marketing our existing or future products.

Patent litigation is prevalent in the medical device and diagnostic sectors. Our commercial success depends in part upon our ability and that of our distributors, contract manufacturers, and suppliers to manufacture, market and sell our planned products, and to use our proprietary technologies without infringing, misappropriating or otherwise violating the proprietary rights or intellectual property of third parties. We may become party to, or be threatened with, future adversarial proceedings or litigation regarding intellectual property rights with respect to our products and technology. Third parties may assert infringement claims against us based on existing or future intellectual property rights. If we are found to infringe a third-party’s intellectual property rights, we could be required to obtain a license from such third party to continue developing and marketing our products and technology. We may also elect to enter into such a license in order to settle pending or threatened litigation. However, we may not be able to obtain any required license on commercially reasonable terms, or at all. Even if we were able to obtain a license, it could be non-exclusive, thereby giving our competitors access to the same technologies licensed to us and could require us to pay significant royalties and other fees. We could be forced, including by court order, to cease commercializing the infringing technology or product. In addition, we could be found liable for monetary damages. A finding of infringement could prevent us from commercializing our planned products in commercially important territories, or force us to cease some of our business operations, which could harm our business. Many of our employees were previously employed at, and many of our current advisors and consultants are employed by, universities or other biotechnology, medical device or pharmaceutical companies, including our competitors or potential competitors. Although we try to ensure that our employees, advisors and consultants do not use the proprietary information or know-how of others in their work for us, we may be subject to claims that we, or these employees, have used or disclosed intellectual property, including trade secrets or other proprietary information, of any such employee’s former employer. These and other claims that we have misappropriated the confidential information or trade secrets of third parties can have a similar negative impact on our business to the infringement claims discussed above.

Even if we are successful in defending against intellectual property claims, litigation or other legal proceedings relating to such claims may cause us to incur significant expenses, and could distract our technical and management personnel from their normal responsibilities. In addition, there could be public announcements of the results of hearings, motions or other interim proceedings or developments and if securities analysts or investors perceive these results to be negative, it could have a substantial adverse effect on the price of our common shares. Such litigation or proceedings could substantially increase our operating losses and reduce our resources available for development activities. We may not have sufficient financial or other resources to adequately conduct such litigation or proceedings. Some of our competitors may be able to sustain the costs of such litigation or proceedings more effectively than we can because of their substantially greater financial resources. Uncertainties resulting from the initiation and continuation of litigation or other intellectual property related proceedings could have a material adverse effect on our ability to compete in the marketplace.

Obtaining and maintaining patent protection depends on compliance with various procedural, document submission, fee payment and other requirements imposed by governmental patent agencies, and our patent protection could be reduced or eliminated for non-compliance with these requirements.

Periodic maintenance fees, renewal fees, annuity fees and various other governmental fees on patents or applications will be due to be paid by us to the USPTO and various governmental patent agencies outside of the United States in several stages over the lifetime of the patents or applications. The USPTO and various non-U.S. governmental patent agencies require compliance with a number of procedural, documentary, fee payment and other similar provisions during the patent application process. In many cases, an inadvertent lapse can be cured by payment of a late fee or by other means in accordance with the applicable rules. However, there are situations in which noncompliance can result in abandonment or lapse of the patent or patent application, resulting in partial or complete loss of patent rights in the relevant jurisdiction. In such an event, our competitors might be able to use our technologies and this circumstance would have a material adverse effect on our business.

Table of Contents

If we fail to comply with our obligations in our intellectual property agreements, we could lose intellectual property rights that are important to our business.

We are a party, and expect to become party in the future, to certain intellectual property agreements that impose various diligence, milestone payment, royalty, insurance and other obligations on us. If we fail to comply with these obligations, any licensor may have the right to terminate such agreements, in which event we may not be able to develop and market any product that is covered by such agreements. Termination of such agreements, or reduction or elimination of our rights under such agreements, may result in our having to negotiate new or reinstated arrangements on less favorable terms, or our not having sufficient intellectual property rights to operate our business. The occurrence of such events could harm our business and financial condition.

The risks described elsewhere in this Quarterly Report on Form 10-Q pertaining to our intellectual property rights also apply to any intellectual property rights that we may license, and any failure by us or any future licensor to obtain, maintain, defend and enforce these rights could have a material adverse effect on our business.

Our internal computer systems, or those used by third parties which we rely on, may fail or suffer security breaches.

Despite the implementation of security measures, our internal computer systems, or those used by third parties which we rely on, are vulnerable to damage from computer viruses and unauthorized access, malware, natural disasters, fire, terrorism, war and telecommunication, electrical failures, cyber-attacks or cyber-intrusions over the Internet, attachments to emails, persons inside our organization, or persons with access to systems inside our organization. The risk of a security breach or disruption, particularly through cyber-attacks or cyber intrusion, including by computer hackers, foreign governments, and cyber terrorists, has generally increased as the number, intensity and sophistication of attempted attacks and intrusions from around the world have increased. While we have not experienced any such material system failure or security breach to our knowledge to date, if such an event were to occur and cause interruptions in our operations, it could result in a material disruption of our development programs and our business operations. For example, the loss of data from completed, ongoing or future studies could result in delays in our regulatory approval efforts and significantly increase our costs to recover or reproduce the data. To the extent that any disruption or security breach were to result in a loss of, or damage to, our data or applications, or inappropriate disclosure of confidential or proprietary information, we could incur liability and the further development and commercialization of our current and future products could be delayed. In addition, any such disruption or security breach could harm our reputation, erode customer confidence in the effectiveness of our security measures, and negatively impact our ability to attract new customers.

Our failure to adequately protect personal information in compliance with evolving legal requirements could harm our business.

In the ordinary course of our business, we collect and store sensitive data, including legally protected patient health information, credit card information and personally identifiable information. We collect this kind of information on our customers for purposes of servicing potential warranty claims and for post-marketing safety vigilance. These data protection and privacy-related laws and regulations are evolving and may result in ever-increasing regulatory and public scrutiny and escalating levels of enforcement and sanctions.

There are a number of state, federal and international laws protecting the privacy and security of health information and personal data. As part of the American Recovery and Reinvestment Act 2009, or ARRA, Congress amended the privacy and security provisions of the Health Insurance Portability and Accountability Act, or HIPAA. HIPAA imposes limitations on the use and disclosure of an individual’s protected health information by certain health care providers, health care clearinghouses, and health insurance plans, collectively referred to as covered entities, that involve the creation, use, maintenance or disclosure of protected health information. The HIPAA amendments also impose compliance obligations and corresponding penalties for non-compliance on individuals and entities that provide services to health care providers and other covered entities, collectively referred to as business associates. Most recently, on December 10, 2020, HHS issued a Notice of Proposed Rulemaking, which if finalized, would make changes to some of HIPAA’s regulatory requirements, which would impact us, to the extent we are a business associate. ARRA also made significant increases in the penalties for improper use or disclosure of an individual’s protected health information under HIPAA and extended enforcement authority to state attorneys general. The amendments also create notification requirements for individuals whose protected health information has been inappropriately accessed or disclosed, notification requirements to federal regulators and in some cases, notification to local and national media. Notification is not required under HIPAA if the health information that is improperly used or disclosed is deemed secured in accordance with encryption or other

Table of Contents

standards developed by the U.S. Department of Health and Human Services, or HHS. Most states have laws requiring notification of affected individuals and state regulators in the event of a breach of personal information, which is a broader class of information than the protected health information protected by HIPAA. Many state laws impose significant data security requirements, such as encryption or mandatory contractual terms to ensure ongoing protection of personal information.

In addition, even when HIPAA does not apply, according to the FTC, failing to take appropriate steps to keep consumers’ personal information secure constitutes unfair acts or practices in or affecting commerce in violation of Section 5(a) of the FTCA, 15 U.S.C § 45(a). The FTC expects a company’s data security measures to be reasonable and appropriate in light of the sensitivity and volume of consumer information it holds, the size and complexity of its business, and the cost of available tools to improve security and reduce vulnerabilities. Medical data is considered sensitive data that merits stronger safeguards. The FTC’s guidance for appropriately securing consumers’ personal information is similar to what is required by the HIPAA Security Rule.

Many foreign countries and governmental bodies, including the EU, Canada, Australia and other relevant jurisdictions, have laws and regulations concerning the collection and use of personal or sensitive data obtained from their residents or by businesses operating within their jurisdiction. For example, the European Commission recently adopted the General Data Protection Regulation, or the GDPR, effective on May 25, 2018, that supersedes current EU data protection legislation, imposes more stringent EU data protection requirements and provides for greater penalties for noncompliance. The GDPR applies to any company established in the EU as well as to those outside the EU if they collect and use personal data in connection with the offering goods or services to individuals in the EU or the monitoring of their behavior. The GDPR enhances data protection obligations for processors and controllers of personal data, including, for example, expanded disclosures about how personal information is to be used, limitations on retention of information, mandatory data breach notification requirements and onerous new obligations on services providers. Non-compliance with the GDPR can trigger steep fines of up to €20 million or 4% of total worldwide annual revenues, whichever is higher. Given the breadth and depth of changes in data protection obligations, meeting the GDPR’s requirements requires time, resources and a review of the technology and systems currently in use against the GDPR’s requirements.

We may be at risk of enforcement actions taken by certain EU data protection authorities while we continue to build our business practices to ensure that all transfers of personal data to us from the European Economic Area are conducted in compliance with all applicable regulatory obligations, the guidance of data protection authorities and evolving best practices. We may find it necessary to establish systems to maintain personal data originating from the EU in the European Economic Area, which may involve substantial expense and may cause us to need to divert resources from other aspects of our business, all of which may adversely affect our business.

Our failure to comply with applicable laws and regulations, or to protect such data, could result in enforcement actions against us, including fines, imprisonment of company officials and public censure, claims for damages by end-customers and other affected individuals, damage to our reputation and loss of goodwill, any of which could harm on our operations, financial performance, and business. Evolving and changing definitions of personal data and personal information, within the European Union, the United States, and elsewhere, may limit or inhibit our ability to operate or expand our business, including limiting strategic partnerships that may involve the sharing of data. Moreover, if the relevant laws and regulations change, or are interpreted and applied in a manner that is inconsistent with our data practices or the operation of our products, we may need to expend resources in order to change our business operations, data practices, or the manner in which our products operate. Even the perception of privacy concerns, whether or not valid, may harm our reputation and inhibit adoption of our products.

There is the risk that the limits we obtained for our cyber liability insurance may not cover the total loss experienced in the event of a data security incident, including the financial loss, legal costs, and business and reputational harm, particularly if there is an interruption to our systems. Additionally, there is the risk of a data privacy or security incident by an employee, which may expose us to liability. If personal information of our customers or employees is misappropriated, our reputation with our customers and employees may be injured resulting in loss of business and/or morale, and we may incur costs to remediate possible injury to our customers and employees or be required to pay fines or take other action with respect to judicial or regulatory actions arising out of such incidents.

Table of Contents

Risks Related to Regulatory and Political Environment

The regulatory approval process is expensive, time consuming and uncertain, and may prevent us from obtaining approvals for the commercialization of Motiva Implants or our planned products.

The research, testing, manufacturing, labeling, approval, selling, import, export, marketing and distribution of medical devices are subject to extensive regulation by the FDA and other regulatory authorities in the United States and other countries, where regulations differ from country to country. Our products are registered to be sold in more than 80 countries, but we are not permitted to market our planned products in the United States until we receive the requisite approval or clearance from the FDA. We have not submitted an application or received marketing approval for Motiva Implants or any planned products in the United States. Obtaining PMA approval for sale of a medical device from the FDA can be a lengthy, expensive and uncertain process. In addition, failure to comply with FDA and other applicable U.S. and foreign regulatory requirements may subject us to administrative or judicially imposed sanctions, including the following:

•warning letters;

•civil or criminal penalties and fines;

•injunctions;

•suspension or withdrawal of regulatory approval;

•suspension of any ongoing clinical studies;

•voluntary or mandatory product recalls and publicity requirements;

•refusal to accept or approve applications for marketing approval of new devices or supplements to approved applications filed by us;

•restrictions on operations, including costly new manufacturing requirements; or

•seizure or detention of our products or import bans.

Prior to receiving approval to commercialize any of our planned products in the United States or abroad, we may be required to demonstrate with substantial evidence from preclinical and well-controlled clinical studies, and to the satisfaction of the FDA or other regulatory authorities abroad, that such planned products are safe and effective for their intended uses. Results from preclinical studies and clinical studies can be interpreted in different ways. Even if we believe the preclinical or clinical data for our planned products are promising, such data may not be sufficient to support approval by the FDA and other regulatory authorities. Administering any of our planned products to humans may produce undesirable side effects, which could interrupt, delay or cause suspension of clinical studies of our planned products and result in the FDA or other regulatory authorities denying approval of our planned products for any or all targeted indications.

Regulatory approval from the FDA is not guaranteed, and the approval process is expensive and may take several years. The FDA also has substantial discretion in the approval process. Despite the time and expense exerted, failure can occur at any stage, and we could encounter problems that cause us to abandon or repeat clinical studies, or perform additional preclinical studies and clinical studies. The number of preclinical studies and clinical studies that will be required for FDA approval varies depending on the planned product, the indication that the planned product is designed to address and the regulations applicable to any particular planned product. The FDA can delay, limit or deny approval of a planned product for many reasons, including, but not limited to, the following:

▪a planned product or one or more of its features may not be deemed safe or effective;

▪FDA officials may not find the data from preclinical studies and clinical studies sufficient;

▪the FDA might not approve our manufacturing or our third-party supplier’s processes or facilities; or

▪the FDA may change its approval policies or adopt new regulations.

If Motiva Implants or any planned products fail to demonstrate safety and efficacy in preclinical and clinical studies or do not gain regulatory approval, our business and results of operations will be harmed.

Table of Contents

Even if we receive regulatory approval for a planned product, we will be subject to ongoing regulatory obligations and continued regulatory review, which may result in significant additional expense and subject us to penalties if we fail to comply with applicable regulatory requirements.

When a regulatory approval is obtained, the approved product and its manufacturer are subject to continual review by the FDA or non-U.S. regulatory authorities. Our regulatory approval for Motiva Implants, as well as any regulatory approval that we receive for Motiva Implants or for any planned products may be subject to limitations on the indicated uses for which the product may be marketed. Future approvals may contain requirements for potentially costly post-marketing follow-up studies to monitor the safety and efficacy of the approved product. In addition, we are subject to extensive and ongoing regulatory requirements by the FDA and other regulatory authorities with regard to the labeling, packaging, adverse event reporting, storage, advertising, promotion and recordkeeping for our products. In addition, we are required to comply with regulations regarding the manufacture of Motiva Implants, which include requirements related to quality control and quality assurance as well as the corresponding maintenance of records and documentation. Further, regulatory authorities must inspect these manufacturing facilities and determine they are in compliance with FDA good manufacturing practice requirements as set forth in the Quality System Regulation, or QSR, before the products can be approved. These facilities are subject to continual review and periodic inspections by the FDA and other regulatory authorities for compliance with QSR regulations. If we or a third party discover previously unknown problems with a product, such as adverse events of unanticipated severity or frequency, or problems with the facility where the product is manufactured, a regulatory authority may impose restrictions on that product, the manufacturer or us, including requiring withdrawal of the product from the market or suspension of manufacturing.

We are subject to extensive and dynamic medical device regulation, which may impede or hinder the approval or sale of our products and, in some cases, may ultimately result in an inability to obtain approval of certain products or may result in the recall or seizure of previously approved products.

Our products, marketing, sales and development activities and manufacturing processes are subject to extensive and rigorous regulation by various regulatory agencies and governing bodies. Under the US Food, Drug and Cosmetic Act (FDC Act), medical devices must receive FDA clearance or approval or an exemption from such clearance or approval before they can be commercially marketed in the U.S. In the EU, we are required to comply with applicable medical device directives (including the Medical Devices Directive and the European Medical Device Regulation) and obtain CE Mark certification in order to market medical devices. In addition, exported devices are subject to the regulatory requirements of each country to which the device is exported. Many countries require that product approvals be renewed or recertified on a regular basis, generally every four to five years. The renewal or recertification process requires that we evaluate any device changes and any new regulations or standards relevant to the device and conduct appropriate testing to document continued compliance. Where renewal or recertification applications are required, they may need to be renewed and/or approved in order to continue selling our products in those countries. There can be no assurance that we will receive the required approvals for new products or modifications to existing products on a timely basis or that any approval will not be subsequently withdrawn or conditioned upon extensive post-market study requirements.

The European Union regulatory bodies finalized a new Medical Device Regulation (MDR) in 2017, which replaced the existing directives and provided three years for transition and compliance. After a one year delay, the MDR became effective on May 26, 2021. The MDR changes several aspects of the existing regulatory framework, such as updating clinical data requirements and introducing new ones, such as Unique Device Identification, or UDI. We and the Notified Bodies who will oversee compliance to the new MDR face uncertainties as the MDR is rolled out and enforced by the Commission and EEA Competent Authorities, creating risks in several areas, including the CE Marking process and data transparency, in the upcoming years.

Regulations regarding the development, manufacture and sale of medical devices are evolving and subject to future change. We cannot predict what impact, if any, those changes might have on our business. Failure to comply with regulatory requirements could have a material adverse effect on our business, financial condition and results of operations. Later discovery of previously unknown problems with a product or manufacturer could result in fines, delays or suspensions of regulatory clearances or approvals, seizures or recalls of products, physician advisories or other field actions, operating restrictions and/or criminal prosecution. We may also initiate field actions as a result of a failure to strictly comply with our internal quality policies. The failure to receive product approval clearance on a timely basis, suspensions of regulatory clearances, seizures or recalls of products, physician advisories or other field actions, or the withdrawal of product approval by regulatory authorities could have a material adverse effect on our business, financial condition or results of operations.

Table of Contents

The medical technology industry is complex and intensely regulated at the federal, state, and local levels and government authorities may determine that we have failed to comply with applicable laws or regulations.

As a company which manufactures and distributes medical devices and technologies, we are subject to numerous regional, national and local laws and regulations. There are significant costs involved in complying with these laws and regulations. Moreover, if we are found to have violated any applicable laws or regulations, we could be subject to civil and/or criminal damages, fines, sanctions or penalties, including exclusion from participation in governmental healthcare programs. We may also be required to change our method of operations. These consequences could be the result of current conduct or even conduct that occurred a number of years ago. We also could incur significant costs merely if we become the subject of an investigation or legal proceeding alleging a violation of these laws and regulations. We cannot predict whether any government authority will determine that we are not operating in accordance with law, or whether the laws will change in the future and impact our business.

Under some circumstances, government investigations can also be initiated by private individuals under whistleblower provisions which may be incentivized by the possibility for private recoveries. Responding to inquiries and enforcement activities can be costly and disruptive to our business operations, even when the allegations are without merit. We also may be subject to other financial sanctions or be required to modify our operations. Any of these actions could have a material adverse effect on our business, financial condition and results of operations.

Health care reform measures could hinder or prevent our planned products’ commercial success.

In the United States, there have been, and we expect there will continue to be, a number of legislative and regulatory changes to the health care system in ways that could affect our future revenue and future profitability and the future revenue and future profitability of our potential customers. Federal and state lawmakers regularly propose and, at times, enact legislation that could result in significant changes to the health care system, some of which are intended to contain or reduce the costs of medical products and services. For example, one of the most significant health care reform measures in decades, the Patient Protection and Affordable Care Act, as amended by the Health Care and Education Reconciliation Act, or PPACA, was enacted in 2010. The PPACA contains a number of provisions, including those governing enrollment in federal health care programs, reimbursement changes and fraud and abuse measures, all of which will impact existing government health care programs and will result in the development of new programs.

Some provisions of the PPACA have yet to be implemented, and there have been judicial and Congressional challenges to certain aspects of the PPACA, as well as prior efforts by the Trump administration to repeal or replace certain aspects of the PPACA. Furthermore, the Tax Cuts and Jobs Act passed in December of 2017 included a provision that would repeal one of the primary pillars of the law, the PPACA’s individual mandate penalty that essentially assessed a monetary penalty or fine on certain individuals who fail to maintain qualifying health coverage for all or part of a year. Congress may consider other legislation to repeal or replace elements of the PPACA on a provision-by-provision basis. We cannot assure you that the PPACA, as currently enacted or as amended in the future, will not adversely affect our business and financial results and we cannot predict how future federal or state legislative or administrative changes relating to health care reform will affect our business. Most recently, under President Biden, the Department of Justice dropped support of two Supreme Court cases challenging PPACA in addition to a case before the U.S. Court of Appeals for the Fifth Circuit. On January 28, 2021, President Biden signed an executive order to expand access to PPACA coverage, stating that it is the “policy” of the Biden administration to protect and strengthen the PPACA and directing agencies to consider suspending, revising, or rescinding actions related to President Trump’s executive orders that are inconsistent with this policy position. However, other legislators continue efforts to repeal and replace other elements of the PPACA. While the ultimate outcome of PPACA is not yet known, any changes that result in price controls reduce access to and reimbursement for care or add additional regulations may have an adverse effect on our financial condition and results of operations.

We cannot predict the impact that such actions against the PPACA or other health care reform under the Biden administration will have on our business, and there is uncertainty as to what healthcare programs and regulations may be implemented or changed at the federal and/or state level in the United States, or the effect of any future legislation or regulation. However, it is possible that such initiatives could have an adverse effect on our ability to obtain approval and/or successfully commercialize products in the United States in the future. For example, any changes that reduce, or impede the ability to obtain, reimbursement for the type of products we intend to

Table of Contents

commercialize in the United States (or our products more specifically, if approved) or reduce medical procedure volumes could adversely affect our business plan to introduce our products in the United States.

In addition, other legislative changes have been proposed and adopted since the PPACA was enacted. For example, the Budget Control Act of 2011, among other things, created the Joint Select Committee on Deficit Reduction to recommend proposals for spending reductions to Congress. The Joint Select Committee did not achieve a targeted deficit reduction of at least $1.2 trillion for the years 2013 through 2021, which triggered the legislation’s automatic reduction to several government programs, including aggregate reductions to Medicare payments to providers of up to 2% per fiscal year, starting in 2013, which, due to subsequent legislative amendments to the statute, including the Bipartisan Budget Act of 2018, will remain in effect through 2027 unless additional Congressional action is taken. We cannot predict whether any additional legislative changes will affect our business.

There likely will continue to be legislative and regulatory proposals at the federal and state levels directed at containing or lowering the cost of health care. We cannot predict the initiatives that may be adopted in the future or their full impact. The continuing efforts of the government, insurance companies, managed care organizations and other payors of health care services to contain or reduce costs of health care may adversely affect:

▪our ability to set a price that we believe is fair for our products;

▪our ability to generate revenue and achieve or maintain profitability; and

▪the availability of capital.

Exposure to United Kingdom political developments, including the outcome of its withdrawal from membership in the European Union, could be costly and difficult to comply with and could seriously harm our business.

In June 2016, a referendum was held in the U.K. which resulted in a majority voting in favor of the U.K. withdrawing from the E.U. (commonly referred to as "Brexit"). Pursuant to legislation approved by the U.K. Parliament and the E.U. Parliament in January 2020, the U.K. withdrew from the E.U. with effect from 11 p.m. (GMT) on January 31, 2020 on the terms of a withdrawal agreement agreed between the U.K. and the E.U. in October 2019. On December 24, 2020, the U.K. and E.U. agreed to a trade deal, or the Trade and Cooperation Agreement, which was ratified by the U.K. on December 30, 2020 and the European Parliament and the Council of the European Union in April 2021, and became effective on May 1, 2021 (after being provisionally effective since January 1, 2021). There are still a number of areas of uncertainty in connection with the future of the U.K. and its relationship with the E.U. and the application and interpretation of the Trade and Cooperation Agreement, and Brexit related matters may take several years to be clarified and resolved. For example, because a significant proportion of the regulatory framework in the U.K. is currently derived from E.U. directives and regulations, Brexit could result in material changes to the regulatory regime applicable to many of our current operations. Although the Trade and Cooperation Agreement offers U.K. and E.U. companies preferential access to each other’s markets, ensuring imported goods will be free of tariffs and quotas, economic relations between the U.K. and the E.U. will now be on more restricted terms than existed previously. Therefore, at this time, we cannot predict the impact that the Trade and Cooperation Agreement and any future agreements contemplated under the terms of the Trade and Cooperation Agreement will have on our on our future business efforts to commercialize our products in the U.K. and E.U. Accordingly, it is possible that new terms of the Trade and Cooperation Agreement may adversely affect our operations and financial results. We are currently in the process of evaluating our own risks and uncertainties to ascertain what financial, trade, regulatory and legal implications the Trade and Cooperation Agreement could have on our operations in the U.K. and otherwise. Finally, uncertainty surrounding Brexit has contributed to recent fluctuations in the U.K. economy as a whole which could experience future disruptions. As a result, Brexit could cause financial and capital markets within and outside the U.K. or the E.U. to constrict, thereby negatively impacting our ability to finance our U. K. operations which could also have an adverse effect on our results of operations and financial condition.

These developments, or the perception that any of them could occur, may adversely affect European and worldwide economic and market conditions, significantly reduce global market liquidity and restrict the ability of key market participants to operate in certain financial markets and could contribute to instability in global financial and foreign exchange markets, including increased volatility in interest rates and foreign exchange rates. The potential impacts could adversely impact other global economies, and in particular, the European economy, a region which accounted for approximately 41% and 44% of our total revenues for the year ended December 31, 2021 and 2020, respectively. In the first quarter of 2019, we completed the migration of our CE Mark certificates,

Table of Contents

originally issued by BSI UK Notified Body, to BSI Group The Netherlands B.V., which is a European Notified Body designated in The Netherlands. We continue to actively monitor the ongoing potential impacts of Brexit and will seek to minimize its impact on our business through review of our existing regulatory requirements, contractual arrangements and obligations, particularly in the European region. Any of these effects of Brexit, among others, could adversely affect our business, business opportunities, results of operations, financial condition and cash flows.

Almost one year after it was introduced to the House of Commons, the Medical Devices Bill was granted Royal Assent on February 11, 2021, becoming law as the Medicines and Medical Devices Act 2021. The purpose of the Act is to create a structure for the UK Government to legislate for updates or amendments to the existing laws on human and veterinary medicine, clinical trials, and medical devices. We will need to comply with the Act on a going forward basis.

The political situation in the United States can affect the ability of our company to conduct business in certain areas or countries if new trade conditions are imposed or enforced by the U.S. government.

There could be negative consequences to our company’s revenue if the U.S. government unexpectedly changes its trade policies towards determined geographies or countries. These policy changes can include such things as trade barriers, which serve to limit or prevent international trade. The U.S. government may request additional funds or tariffs in exchange for the right to export items into the country. Tariffs or quotas may be used to protect domestic producers from foreign competition. Changes may include the modification or withdrawal of free trade agreements already in place. This also can have a large effect on the profits of our company because it either cuts revenues as a result of a tax on imports/exports or restricts the amount of revenues that can be earned.

The global economic instability caused by the military conflict between Russia and Ukraine may adversely affect our business in Europe.

In February of 2022, Russia invaded Ukraine and is still engaged in active armed conflict against the country. The conflict has resulted in worldwide geopolitical and macroeconomic uncertainty. Our revenue in Russia and Ukraine, in aggregate, accounted for 1.1% and 2.2% of our consolidated net revenue for the six months ended June 30, 2022 and 2021, respectively. The invasion of and ongoing conflict in Ukraine will likely continue to cause disruption and instability in Russia, Ukraine, and other European markets in which we operate. It is not possible at this time to predict the ultimate consequences of the conflict in Ukraine or the responses of governments or others to the conflict, which could include, among other things, additional sanctions, greater regional instability or expansion of the conflict, embargoes, geopolitical shifts, litigation, and impacts on macroeconomic conditions, commodities, currency exchange rates, supply chains, and financial markets.

Risks Related to Taxation

Tax authorities may disagree with our positions and conclusions regarding certain tax positions, resulting in unanticipated costs, taxes or non-realization of expected benefits.

A tax authority may disagree with tax positions that we have taken, which could result in increased tax liabilities. For example, the U.S. Internal Revenue Service or another tax authority could challenge the amounts paid between our affiliated companies pursuant to our intercompany arrangements and transfer pricing policies. A tax authority may take the position that material income tax liabilities, interest and penalties are payable by us, in which case, we expect that we might contest such assessment. Contesting such an assessment may be lengthy and costly and if we were unsuccessful in disputing the assessment, the implications could increase our anticipated effective tax rate, where applicable. In addition, we may be subject to additional tax liabilities, which could materially and adversely affect our business, financial condition and results of operations. The application, interpretation and enforcement value-added tax, or VAT, and other taxes and related regulations applicable to medical device companies is complex and evolving.

We are a multinational organization faced with increasingly complex tax issues in many jurisdictions, and changes in tax laws or their application to the operation of our business could adversely impact our operating results and our business.

We conduct operations in multiple jurisdictions, and we are subject to certain taxes, including income, sales and use, employment, value added and other taxes, in the United States and other jurisdictions in which we do business. A change in the tax laws in the jurisdictions in which we do business, including an increase in tax rates

Table of Contents

or an adverse change in the treatment of an item of income or expense, possibly with retroactive effect, could result in a material increase in the amount of taxes we incur.

Our determination of our tax liability is subject to review by applicable U.S. and foreign tax authorities. Any adverse outcome of such a review could harm our operating results and financial condition. The determination of our worldwide provision for income taxes and other tax liabilities requires significant judgment and, in the ordinary course of business, there are many transactions and calculations where the ultimate tax determination is complex and uncertain. Moreover, as a multinational business, we have subsidiaries that engage in many intercompany transactions in a variety of tax jurisdictions where the ultimate tax determination is complex and uncertain. The taxing authorities of the jurisdictions in which we operate may challenge our methodologies, which could impact our financial position and operating results. Historically, we have allocated some of our employees’ and contractors’ time across multiple business entities in the international jurisdictions in which we operate. If it were determined that we had misclassified our employees’ or contractors’ employment status or certain of our expenditures under local laws, we may be subjected to penalties or be required to pay withholding taxes for, extend employee benefits to, provide compensation for unpaid overtime to, or otherwise incur substantially greater expenses with respect to such employees and contractors. Any of the foregoing circumstances could have a material adverse impact on our operating results and financial condition.

We are periodically reviewed and audited by tax authorities with respect to income and non-income taxes. Tax authorities may disagree with certain positions we have taken, and we may have exposure to additional income and non-income tax liabilities which could have an adverse effect on our operating results and financial condition. Such authorities could impose additional taxes, interest and penalties, claim that various withholding requirements apply to us or our subsidiaries or assert that benefits of tax treaties are not available to us or our subsidiaries. In addition, our future effective tax rates could be favorably or unfavorably affected by changes in tax rates, changes in the valuation of our deferred tax assets or liabilities, the effectiveness of our tax planning strategies, or changes in tax laws or their interpretation. Such changes could have an adverse impact on our financial condition.

As a result of these and other factors, the ultimate amount of tax obligations owed may differ from the amounts recorded in our financial statements and any such difference may harm our operating results in future periods in which we change our estimates of our tax obligations or in which the ultimate tax outcome is determined.

Our ability to use net operating losses to offset future taxable income and certain other tax attributes may be subject to certain limitations.

Federal and California laws impose restrictions on the utilization of net operating loss carryforwards and research and development credit carryforwards in the event of a change in ownership of the Company, which constitutes an “ownership change” as defined by Internal Revenue Code Sections 382 and 383. Generally, an ownership change occurs if the percentage of the value of the shares that are owned by one or more direct or indirect “five percent shareholders” increases by more than 50% over their lowest ownership percentage at any time during the applicable testing period. If we have experienced an “ownership change” at any time since our formation, we may already be subject to limitations on our ability to utilize our existing net operating losses and other tax attributes. We have not experienced an ownership change in the past that would materially impact the availability of its net operating losses and tax credits. Nevertheless, future changes in our share ownership, which may be outside of our control, may trigger an “ownership change” and, consequently, Section 382 and 383 limitations. We have not completed a Section 382 and 383 analysis to determine if an ownership change has occurred. Until such analysis is completed, we cannot be sure that the full amount of the existing net operating loss carryforwards will be available to us, even if we do generate taxable income before their expiration. In addition, under the newly enacted U.S. federal income tax law, federal net operating losses incurred in 2018 and in future years may be carried forward indefinitely, but the deductibility of such federal net operating losses is limited.

U.S. holders of our common shares may suffer adverse tax consequences if we are characterized as a passive foreign investment company.

A non-U.S. corporation will be classified as a passive foreign investment company, or PFIC, for U.S. federal income tax purposes, in any taxable year in which either (1) at least 75% of its gross income is passive income; or (2) at least 50% of the average quarterly value of its total gross assets is attributable to assets that produce “passive income” or are held for the production of passive income. Based on the project composition of our income and valuation of our assets, we do not believe we were a PFIC in 2020, and we do not expect to be a PFIC for our current taxable year or to become one in the future. However, because our PFIC status is subject to a number of uncertainties, neither we nor our tax advisors can provide any assurances regarding our PFIC status.

Table of Contents

If we are a PFIC for any taxable year during which a U.S. holder holds our common shares, the U.S. holder may be subject to adverse tax consequences. U.S. investors should consult their advisors regarding the application of these rules and the availability of any potential elections. See “Material British Virgin Island and U.S. Federal Income Tax Considerations.”

If a United States person is treated as owning at least 10% of our common shares, such holder may be subject to adverse U.S. federal income tax consequences.

If a United States person is treated as owning (directly, indirectly, or constructively) at least 10% of the value or voting power of our ordinary shares, such person may be treated as a “United States shareholder” with respect to each “controlled foreign corporation” in our group (if any). We may become a controlled foreign corporation. In addition, because our group includes one or more U.S. subsidiaries, certain of our non-U.S. subsidiaries could be treated as controlled foreign corporations (regardless of whether or not we are treated as a controlled foreign corporation). A U.S. shareholder of a controlled foreign corporation may be required to report annually and include in its U.S. taxable income its pro rata share of “Subpart F income,” “global intangible low-taxed income,” and investments in U.S. property by controlled foreign corporations, regardless of whether we make any distributions. An individual that is a U.S. shareholder with respect to a controlled foreign corporation generally would not be allowed certain tax deductions or foreign tax credits that would be allowed to a U.S. shareholder that is a U.S. corporation. Failure to comply with these reporting obligations may subject a U.S. shareholder to significant monetary penalties and may prevent the statute of limitations with respect to such shareholder’s U.S. federal income tax return for the year for which reporting was due from starting. We cannot provide any assurances that we will assist investors in determining whether we or any of our non-U.S. subsidiaries is treated as a controlled foreign corporation or whether any investor is treated as a U.S. shareholder with respect to any such controlled foreign corporation or furnish to any U.S. shareholders information that may be necessary to comply with the aforementioned reporting and tax paying obligations. A U.S. investor should consult its advisors regarding the potential application of these rules to an investment in our common shares.

Discontinuation of preferential tax treatments we currently enjoy or other unfavorable changes in tax law could result in additional compliance obligations and costs.

Discontinuation of preferential tax treatments we currently enjoy or other unfavorable changes in tax law could result in additional compliance obligations and costs. We are currently the beneficiary of a tax holiday in Costa Rica pursuant to which we are subject to a tax at a 0% rate. However, there can be no assurance that we will continue to qualify for or receive such favorable tax treatment. If we fail to maintain such favorable tax treatment we may be subject to tax in Costa Rica at a significantly higher rate.

Risks Related to Ownership of Our Securities

Our share price may be volatile, and purchasers of our securities could incur substantial losses.

Our common shares have only recently become publicly traded, and we expect that the price of our common shares will likely be volatile. The securities markets in general, and the market for biotechnology and medical device companies in particular, have experienced extreme volatility that has often been unrelated to the operating performance of particular companies. Additionally, the lack of an active market may impair the value of our common shares, or your ability to sell your shares at the time you wish to sell them or at a price that you consider reasonable. Although our common shares are listed on the Nasdaq Capital Market, if we fail to satisfy the continued listing standards, we could be de-listed, which would negatively impact the price of our common shares. The market price for our shares may be influenced by many factors, including the following:

•our ability to successfully commercialize, and realize revenues from sales of, Motiva Implants;

▪the success of competitive products or technologies;

▪results of clinical studies of Motiva Implants or planned products or those of our competitors;

•regulatory or legal developments in the United States and other countries, especially changes in laws or regulations applicable to our products;

•introductions and announcements of new products by us, our commercialization partners, or our competitors, and the timing of these introductions or announcements;

•actions taken by regulatory agencies with respect to our products, clinical studies, manufacturing processes or sales and marketing terms;

Table of Contents

•variations in our financial results or those of companies that are perceived to be similar to us;

•the success of our efforts to acquire or in-license additional products or planned products;

•developments concerning our collaborations, including but not limited to those with our sources of manufacturing supply and our commercialization partners;

•developments concerning our ability to bring our manufacturing processes to scale in a cost-effective manner;

•announcements by us or our competitors of significant acquisitions, strategic partnerships, joint ventures or capital commitments;

•developments or disputes concerning patents or other proprietary rights, including patents, litigation matters and our ability to obtain patent protection for our products;

•our ability or inability to raise additional capital and the terms on which we raise it;

•the recruitment or departure of key personnel;

•changes in the structure of health care payment systems;

•negative shifts in the economy effecting the number of aesthetic breast procedures;

•market conditions in the pharmaceutical and biotechnology sectors;

•actual or anticipated changes in earnings estimates or changes in securities analyst recommendations regarding our common shares, other comparable companies or our industry generally;

•trading volume of our common shares;

•sales of our common shares by us or our shareholders;

•the impact of the COVID-19 pandemic;

•general economic, industry and market conditions; and

•the other risks described in this “Risk Factors” section.

These broad market and industry factors may harm the market price of our common shares, regardless of our operating performance. In the past, following periods of volatility in the market, securities class-action litigation has often been instituted against companies. Such litigation, if instituted against us, could result in substantial costs and diversion of management’s attention and resources, which could adversely affect our business, financial condition, results of operations and growth prospects.

We identified a material weakness in our internal control over financial reporting as of December 31, 2021 and 2020, and may identify additional material weaknesses in the future that may cause us to fail to meet our reporting obligations or result in material misstatements of our consolidated financial statements. If we fail to establish and maintain effective control over financial reporting, our ability to accurately and timely report our financial results could be adversely affected.

Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements in accordance with U.S. generally accepted accounting principles. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of annual or interim financial statements will not be prevented or detected on a timely basis. Prior to the completion of our IPO, we were a private company with limited accounting and compliance personnel and other resources to address our internal control over financial reporting.

It was determined that our primary user access controls (i.e. provisioning, de-provisioning, and quarterly user access review) to ensure appropriate segregation of duties that would adequately restrict user and privileged access to the financially relevant systems and data to appropriate Company personnel were not operating effectively. These user access control deficiencies resulted in a lack of segregation of duties with respect to certain user roles. Automated process-level controls and manual controls that are dependent upon the information derived from such financially relevant systems were also determined to be ineffective as a result of such

Table of Contents

deficiency. As a result, it was determined that a material weakness in our internal control over financial reporting existed as of December 31, 2021.

In addition, in connection with the preparation and audit of our 2020 financial statements, we had one material weakness. It was determined that we did not perform an adequate review over the manual consolidation process, resulting in an audit adjustment. We implemented a number of measures to address the material weakness, which was fully remediated as of December 31, 2021.

If additional material weaknesses or significant deficiencies in our internal control are discovered or occur in the future, it may materially adversely affect our ability to report our financial condition and results of operations in a timely and accurate manner and impact investor confidence in our Company.

The actions we have taken are subject to continued review, supported by confirmation and testing by management as well as audit committee oversight. The identification and remediation of additional material weaknesses in the future, could adversely affect our ability to report financial information, including our filing of quarterly or annual reports with the SEC on a timely and accurate basis and prohibit us from producing timely and accurate consolidated financial statements, which may adversely affect our share price and we may be unable to maintain compliance with Nasdaq listing requirements.

Risks Related to Being a British Virgin Islands Company

Rights of shareholders under British Virgin Islands law differ from those under U.S. law, and, accordingly, you may have fewer protections as a shareholder.

Our corporate affairs are governed by our amended and restated memorandum and articles of association, the BVI Act, and the common law of the British Virgin Islands. The rights of shareholders to take legal action against our directors, actions by minority shareholders and the fiduciary responsibilities of our directors under British Virgin Islands law are to a large extent governed by the common law of the British Virgin Islands and by the BVI Act. The common law of the British Virgin Islands is derived in part from comparatively limited judicial precedent in the British Virgin Islands as well as from English common law, which has persuasive, but not binding, authority on a court in the British Virgin Islands. The rights of our shareholders and the fiduciary responsibilities of our directors under British Virgin Islands law are not as clearly established as they would be under statutes or judicial precedents in some jurisdictions in the United States. In particular, the British Virgin Islands has a less developed body of securities laws as compared to the United States, and some states (such as Delaware) have more fully developed and judicially interpreted bodies of corporate law. As a result of the foregoing, holders of our ordinary shares may have more difficulty in protecting their interests through actions against our management, directors or major shareholders than they would as shareholders of a U.S. company.

British Virgin Islands companies may not be able to initiate shareholder derivative actions, thereby depriving shareholders of one avenue to protect their interests.

British Virgin Islands companies may not have standing to initiate a shareholder derivative action in a federal court of the United States. The circumstances in which any such action may be brought, and the procedures and defenses that may be available in respect of any such action, may result in the rights of shareholders of a British Virgin Islands company being more limited than those of shareholders of a company organized in the United States. Accordingly, shareholders may have fewer alternatives available to them if they believe that corporate wrongdoing has occurred. The British Virgin Islands courts are also unlikely to recognize or enforce judgments of courts in the United States based on certain liability provisions of U.S. securities law, or to impose liabilities based on certain liability provisions of the U.S. securities laws that are penal in nature, in original actions brought in the British Virgin Islands. There is no statutory recognition in the British Virgin Islands of judgments obtained in the United States, although the courts of the British Virgin Islands will generally recognize and enforce the non-penal judgment of a non-U.S. court of competent jurisdiction without retrial on the merits. This means that even if shareholders were to sue us successfully, they may not be able to recover anything to make up for the losses suffered.

British Virgin Islands law differs from the laws in effect in the United States, and U.S. investors may have difficulty enforcing civil liabilities against us, our directors or members of senior management.

Under our amended and restated memorandum and articles of association, we may indemnify and hold our directors harmless against all claims and suits brought against them, subject to limited exceptions. Furthermore, to the extent allowed by law, the rights and obligations among or between us, any of our current or former directors, officers and employees and any current or former shareholder will be governed exclusively by the laws

Table of Contents

of the British Virgin Islands and subject to the jurisdiction of the British Virgin Islands courts, unless those rights or obligations do not relate to or arise out of their capacities as such. Although there is doubt as to whether U.S. courts would enforce these provisions in an action brought in the United States, under U.S. securities laws, these provisions could make judgments obtained outside of the British Virgin Islands more difficult to enforce against our assets in the British Virgin Islands or jurisdictions that would apply British Virgin Islands law.

The laws of the British Virgin Islands provide limited protection for minority shareholders, so minority shareholders will have limited or no recourse if they are dissatisfied with the conduct of our affairs.

Under the laws of the British Virgin Islands, there is limited statutory law for the protection of minority shareholders other than the provisions of the BVI Act dealing with shareholder remedies, as summarized under “Description of Share Capital-Shareholders’ Rights Under British Virgin Islands Law Generally.” One protection under statutory law is that shareholders may bring an action to enforce the constituent documents of a British Virgin Islands company and are entitled to have the affairs of the Company conducted in accordance with the BVI Act and the amended and restated memorandum and articles of association of the Company. As such, if those who control the Company have disregarded the requirements of the BVI Act or the provisions of our amended and restated memorandum and articles of association, then the courts will likely grant relief. Generally, the areas in which the courts will intervene are the following: (i) an act complained of which is illegal; (ii) acts that constitute oppression, unfair discrimination or unfair prejudice against the minority where the wrongdoers control the Company; (iii) acts that infringe on the personal rights of the shareholders, such as the right to vote; and (iv) acts where we have not complied with provisions requiring approval of a special or extraordinary majority of shareholders, which are more limited than the rights afforded to minority shareholders under the laws of many states in the United States.

Provisions in our amended and restated memorandum and articles of association and under British Virgin Islands law could make an acquisition of us more difficult and may prevent attempts by our shareholders to replace or remove our current management.

Provisions in our amended and restated memorandum and articles of association may discourage, delay or prevent a merger, acquisition or other change in control of us that shareholders may consider favorable, including transactions in which shareholders might otherwise receive a premium for their shares. These provisions could also limit the price that investors might be willing to pay in the future for our common shares, thereby depressing the market price of our common shares. In addition, these provisions may frustrate or prevent any attempts by our shareholders to replace or remove our current management by making it more difficult for shareholders to replace members of our Board of Directors. Because our Board of Directors is responsible for appointing the members of our management team, these provisions could in turn affect any attempt by our shareholders to replace current members of our management team. Among others, these provisions include the following:

•our Board of Directors is divided into three classes with staggered three-year terms which may delay or prevent a change of our management or a change in control;

•our Board of Directors has the right to elect directors to fill a vacancy created by the expansion of our Board of Directors or the resignation, death or removal of a director, which will prevent shareholders from being able to fill vacancies on our Board of Directors;

•our shareholders are not able to act by written consent, and, as a result, a holder, or holders, controlling a majority of our shares are not able to take certain actions other than at annual shareholders’ meetings or special shareholders’ meetings;

•our amended and restated memorandum and articles of association do not allow cumulative voting in the election of directors, which limits the ability of minority shareholders to elect director candidates;

•amendments of our amended and restated memorandum and articles of association will require the approval of shareholders holding 66 2/3% of our outstanding voting shares (unless amended by the Board of Directors);

•our shareholders are required to provide advance notice and additional disclosures in order to nominate individuals for election to our Board of Directors or to propose matters that can be acted upon at a shareholders’ meeting, which may discourage or deter a potential acquiror from conducting a solicitation of proxies to elect the acquiror’s own slate of directors or otherwise attempting to obtain control of our company; and

Table of Contents

•our Board of Directors is able to issue, without shareholder approval, preferred shares with voting or other rights or preferences that could impede the success of any attempt to acquire us.

Moreover, because we are incorporated in the British Virgin Islands, we are governed by the provisions of BVI Business Companies Act, 2004, as amended, or the BVI Act, which provide for different shareholder rights than a Delaware corporation. See, for example, the risk factor titled “Rights of shareholders under British Virgin Islands law differ from those under U.S. law, and, accordingly, you may have fewer protections as a shareholder.”

Table of Contents

ITEM 2. UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS

None

ITEM 3. DEFAULTS UPON SENIOR SECURITIES

None

ITEM 4. MINE SAFETY DISCLOSURES

None

ITEM 5. OTHER INFORMATION

None

ITEM 6. EXHIBITS

(a) Exhibits.


Exhibits	Description	Incorporation by Reference




10.5+	Master Supply Agreement, effective as of May 13, 2022, by and between Establishment Labs S. A. and Nusil Technology LLC.	Form 8-K; Exhibit 10.1, Filed June 6, 2022
10.6	Form of Share Option Agreement (US) under the 2018 Equity Incentive Plan	Filed herewith.
10.7	Form of Share Option Agreement (International) under the 2018 Equity Incentive Plan	Filed herewith.
10.8	Form of Restricted Share Unit Award Agreement (US) under the 2018 Equity Incentive Plan	Filed herewith.
10.9	Form of Restricted Share Unit Award Agreement (International) under the 2018 Equity Incentive Plan	Filed herewith.
31.1	Certification of Principal Executive Officer pursuant to Securities Exchange Act Rules 13a-14(a) and 15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
31.2	Certification of Principal Financial Officer pursuant to Securities Exchange Act Rules 13a-14(a) and 15d-14(a), as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
32.1*	Certification of Chief Executive Officer and Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
101.INS	Inline XBRL Instance Document
101.SCH	Inline XBRL Taxonomy Extension Schema Document
101.CAL	Inline XBRL Taxonomy Extension Calculation Linkbase Document
101.DEF	Inline XBRL Taxonomy Extension Definition Linkbase Document
101.LAB	Inline XBRL Taxonomy Extension Label Linkbase Document
101.PRE	Inline XBRL Taxonomy Extension Presentation Linkbase Document
104	Cover Page Interactive Data File (formatted as Inline XBRL and contained in Exhibit 101)

+ Certain portions of the exhibit have been redacted in compliance with Item 601(b)(10) of Regulation S-K

* The certifications filed as Exhibits 32.1 are not deemed “filed” for purposes of Section 18 of the Securities Exchange Act of 1934 and are not to be incorporated by reference into any filing of the Company under the Securities Exchange Act of 1933 or the Securities Exchange Act of 1934, whether made before or after the date hereof irrespective of any general incorporation by reference language contained in any such filing, except to the extent that the registrant specifically incorporates it by reference.

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.


		ESTABLISHMENT LABS HOLDINGS INC.

		By:	/s/ Juan José Chacón Quirós

Date:	August 9, 2022	By:	Juan José Chacón Quirós
		Title:	Chief Executive Officer and Director
			(Principal Executive Officer)

Date:	August 9, 2022	By:	/s/ Rajbir S. Denhoy

		Name:	Rajbir S. Denhoy
		Title:	Chief Financial Officer
			(Principal Financial Officer and Chief Accounting Officer)