FARO TECHNOLOGIES INC - Annual Report: 2010 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

For the fiscal year ended December 31, 2010

or

For the transition period from                     to                     

Commission File Number 0-23081

FARO TECHNOLOGIES, INC.

(Exact name of Registrant as Specified in Its Charter)

(Registrant’s telephone number, including area code): (407) 333-9911

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  þ

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.    Yes  ¨    No  þ

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  þ    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ¨    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definite proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    þ

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer  ¨                    Accelerated filer  þ                    Non-accelerated filer  ¨

Smaller Reporting Company  ¨

(Do not check if a smaller reporting company)

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ¨    No  þ

The aggregate market value of the Registrant’s common stock held by non-affiliates of the Registrant on July 3, 2010, the last business day of the registrant’s most recently completed second fiscal quarter, was approximately $386 million (based on the last sale on such date on the NASDAQ Global Select Market).

As of February 21, 2011, there were outstanding 16,215,971 shares of the Registrant’s common stock.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Registrant’s proxy statement for the 2011 Annual Meeting of Shareholders are incorporated by reference in Part III of this Annual Report on Form 10-K.

Table of Contents

TABLE OF CONTENTS

Table of Contents

PART I

CAUTIONARY STATEMENTS FOR FORWARD-LOOKING INFORMATION

Some of the statements made in this Annual Report on Form 10-K are “forward-looking statements” within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. Statements that are not historical facts or that describe our plans, beliefs, goals, intentions, objectives, projections, expectations, assumptions, strategies, or future events are forward-looking statements. In addition, words such as “may,” “will,” “believe,” “plan,” “should,” “could,” “seek,” “expect,” “anticipate,” “intend,” “estimate,” “goal,” “objective,” “project,” “forecast,” “target” and similar words identify forward-looking statements.

Forward-looking statements are not guarantees of future performance and are subject to a number of known and unknown risks, uncertainties, and other factors that could cause actual results to differ materially from those expressed or implied by such forward-looking statements. Consequently, undue reliance should not be placed on these forward-looking statements. The Company does not intend to update any forward-looking statements, whether as a result of new information, future events, or otherwise, unless otherwise required by law. Important factors that could cause actual results to differ materially from those contemplated in such forward-looking statements include, among others, the following:

1

Table of Contents

as well as other risks and uncertainties discussed in Part I. Item 1A. Risk Factors in this Annual Report on Form 10-K. Moreover, new risks and uncertainties emerge from time to time, and we undertake no obligation to update publicly or review the risks and uncertainties included in this Annual Report on Form 10-K.

The Company designs, develops, manufactures, markets and supports portable, software driven, 3-D measurement and imaging systems used in a broad range of manufacturing, industrial, building construction and forensic applications. The Company’s FaroArm^®, FARO Laser ScanArm^® and FARO Gage articulated measuring devices, the FARO Laser Tracker ION™, the FARO Focus^3D, the FARO 3D Imager AMP, and their companion CAM2^® software, provide for Computer-Aided Design, or CAD, based inspection and/or factory-level statistical process control and high-density surveying. Together, these products integrate the measurement, quality inspection, and reverse engineering functions with CAD software to improve productivity, enhance product quality and decrease rework and scrap in the manufacturing process. The Company uses the acronym “CAM2” for this process, which stands for computer-aided measurement. As of December 2010, the Company’s

2

Table of Contents

products have been purchased by approximately 11,000 customers worldwide, ranging from small machine shops to such large manufacturing and industrial companies as Audi, Boeing, Bombadier, Ford, General Electric, General Motors, Honda, Johnson Controls, Komatsu America International, Lockheed Martin, NASA, Northrup Grumman, Siemens and Volkswagen, among many others.

The Company was founded in 1982 and re-incorporated in Florida in 1992. The Company’s worldwide headquarters are located at 250 Technology Park, Lake Mary, Florida 32746, and its telephone number is (407) 333-9911.

Industry Background

The Company believes four principal forces drive the need for its products and services: 1) the widespread use by manufacturers of CAD in product development, which shortens product cycles; 2) the adoption by manufacturers of quality standards such as Six Sigma and ISO-9000 (and its offshoot QS-9000), which stress the measurement of every step in a manufacturing process to reduce or eliminate defects, 3) the inability of traditional measurement devices to address many manufacturing problems such as throughput, efficiency, and accuracy, especially with respect to large components for products such as automobiles, aircraft, heavy duty construction equipment and factory retrofits, and 4) the growing demand to capture large volumes of three-dimensional data for modeling and analysis.

CAD improves the manufacturing process. The creation of physical products involves the processes of design, engineering, production and measurement and quality inspection. These basic processes have been profoundly affected by the computer hardware and software revolution that began in the 1980s. CAD software was developed to automate the design process, providing manufacturers with computerized 3-D design capability and shortening the time between design changes. Today, most manufacturers use some form of CAD software to create designs and engineering specifications for new products and to quantify and modify designs and specifications for existing products. While manufacturers previously designed their products to remain in production for longer periods of time, current manufacturing practices must accommodate more frequent product introductions and modifications, while satisfying more stringent quality and safety standards. Assembly fixtures and measurement tools must be linked to the CAD design to enable production to keep up with the rate of design change.

Quality standards dictate measurement to reduce defects. QS-9000 is the name given to the Quality System Requirements of the automotive industry developed by Chrysler, Ford, General Motors and major truck manufacturers. Companies registered under QS-9000 are considered to have higher standards and better quality products. Six Sigma is a set of quality standards that embodies the principles of total quality management focused on measuring results and reducing product or service failure rates to 3.4 per million. All aspects of a Six Sigma company’s infrastructure must be analyzed, and if necessary, restructured to increase revenues and raise customer satisfaction levels. The all-encompassing nature of these and other quality standards has resulted in manufacturers measuring every aspect of their process, including stages of product assembly that may never have been measured before, in part because of the lack of suitable measurement equipment.

Traditional products do not measure up. A significant aspect of the manufacturing process is measurement and quality inspection. Historically, manufacturers have measured and inspected products using hand-measurement tools such as scales, calipers, micrometers and plumb lines for simple measuring tasks, test (or check) fixtures for certain large manufactured products, and traditional (or fixed) coordinate measurement machines, or CMM, for objects that require higher precision measurement. However, the broader utility of each of these measurement methods is limited.

Although hand-measurement tools are often appropriate for simple geometric measurements, including hole diameters or length and width of a rectangular component, their use for complex part measurements, such as the fender of a car, is limited. Also, these devices do not allow for the measurements to be directly compared

3

Table of Contents

electronically to the CAD model of the part. Test fixtures (customized fixed tools used to make comparative measurements of complex production parts to “master parts”) are relatively expensive and must be reworked or discarded each time a dimensional change is made in the part being measured. In addition, these manual measuring devices do not permit the manufacturer to electronically compare the dimensions of an object with its CAD model.

Conventional CMMs are generally large, fixed-base machines that provide very high levels of precision and provide a link to the CAD model of the object being measured. However, fixed-base CMMs require that the object being measured be brought to the CMM and fit within the CMMs measurement grid. As manufactured subassemblies increase in size and become integrated into even larger assemblies, they become less transportable, thus diminishing the utility of a conventional CMM. Consequently, manufacturers must continue to use hand-measuring tools, or expensive customized test fixtures, to measure large or unconventionally shaped objects. In addition, some parts or assemblies are not easily accessible and cannot be measured using traditional devices.

The market demands three-dimensional data. Conventional surveying equipment is limited to single-point measurements and does not have the capacity to capture and analyze large volumes of three-dimensional data. As data requirements for construction, civil engineering and forensic inspection projects become more complex, single-point measurement devices will become increasingly more difficult to utilize in those applications.

Escalating global competition has created a demand for higher quality products with shorter life cycles. Customers require more rapid design, greater control of the manufacturing process, tools to compare components to their CAD specifications, the ability to precisely measure components that cannot be measured or inspected by conventional devices, and the ability to capture and analyze large volumes of three-dimensional data. Moreover, they increasingly require measurement capabilities to be integrated into manufacturing processes and to be available on the factory floor. These changing demands have driven the demand for FARO’s products and services.

FARO Products

The FaroArm. The FaroArm is a combination of a portable, six or seven-axis, instrumented articulated measurement arm, a computer, and CAM2 software programs, which are described below under “CAM2 Software”.

The FARO Laser ScanArm. The FARO Laser ScanArm is a FaroArm equipped with a combination of a hard probe (like that in the FaroArm) and a non-contact line laser probe. This product provides the Company’s customers the ability to measure products without touching them and offers a seven-axis contact/non-contact

4

Table of Contents

measurement device with a fully integrated laser scanner. The ScanArm is used for non-contact measurement applications, including inspection, cloud-to-CAD comparison, rapid prototyping, reverse engineering and 3-D modeling.

The FARO Gage. Sold as a combination of an articulated arm device with a computer and software, the FARO Gage is a smaller, higher-accuracy version of the FaroArm. The FARO Gage is also distinguished from the FaroArm by the special mounting features and software unique to the FARO Gage. The FARO Gage is targeted at machine tools and bench tops around machine tools, where basic measurements of smaller machined parts must be measured. As such, the CAM2 FARO Gage software developed for this device, described below, features basic 2-D and 3-D measurements common to these applications.

The FARO Laser Tracker ION. The FARO Laser Tracker ION combines a portable, large-volume laser measurement tool, a computer, and CAM2 software programs.

The FARO Focus^3D. The FARO Focus^3D utilizes laser technology to measure and collect a cloud of data points, allowing for the detailed and precise three-dimensional rendering of an object or an area as large as a factory. This technology is currently used for factory planning, facility life-cycle management, quality control, forensic analysis and capturing large volumes of three-dimensional data. The FARO Focus^3D simplifies modeling, reduces project time and maintains or increases the accuracy of the image. The resulting data is used with major CAD systems or FARO’s own proprietary CAM2 software.

The FARO 3D Imager AMP. The FARO 3D Imager AMP is a high-performance non-contact 3D Imager, capable of collecting millions of points to generate infinitely-focused fringe patterns. The FARO 3D Imager AMP creates a highly-accurate point cloud of objects in the AMP’s field of view. This technology is used in quality control to improve product quality and reduce scrap, as well as for reverse engineering and rapid manufacturing.

CAM2 Software. CAM2 is the Company’s family of proprietary CAD-based measurement and statistical process control software used with the Company’s measurement devices. The CAM2 product line includes the following software programs, many of which are translated into multiple languages:

5

Table of Contents

To support its product lines, the Company also offers extended warranties and comprehensive support, training and technology consulting services to its customers.

Customers

As of December 2010, the Company’s products have been purchased by approximately 11,000 customers worldwide, ranging from small machine shops to such large manufacturing and industrial companies as Audi, Bell Helicopter, Boeing, British Aerospace, Caterpillar, Daimler AG, General Electric, General Motors, Honda, Johnson Controls, Komatsu America International, Lockheed Martin, Nissan, Siemens and Volkswagen, among many others, as well as universities and law enforcement agencies. The Company’s ten largest customers by revenue represented an aggregate of approximately 5.4% of the Company’s total revenues in 2010. No customer represented more than 1.3% of the Company’s sales in 2010.

Sales and Marketing

The Company conducts its sales and marketing efforts on a decentralized basis in three main regions around the world: Americas, Europe/Africa and Asia/Pacific. The regional headquarters for the Americas is located in the Company’s headquarters in Lake Mary, Florida; the Europe/Africa regional headquarters is located in Stuttgart, Germany; and the regional headquarters for the Asia/Pacific region is located in Singapore. At December 31, 2010, the Company employed 81, 111, and 108 sales and marketing specialists in the Americas, Europe/Africa, and Asia/Pacific regions, respectively. The Company sells most of its products through direct sales representation in the United States, Canada, Mexico, Brazil, Germany, the United Kingdom, France, Spain, Italy, Poland, Turkey, the Netherlands, India, China, Singapore, Malaysia, Vietnam, Thailand, and Japan. The Company also sells its products through distributors, although this has historically represented a small percentage of total sales. Note 17 to the Company’s “Notes to Consolidated Financial Statements” included in Part II. Item 8 of this Annual Report on Form 10-K includes financial information about the Company’s foreign and domestic operations and export sales.

The Company’s sales and marketing efforts use a process of integrated lead qualification and sales demonstration. Once a customer opportunity is identified, the Company employs a team-based sales approach involving inside and outside sales personnel who are supported by application engineers. Each team has the ability to sell multiple product lines. The Company employs a variety of marketing techniques to promote brand awareness and customer identification.

6

Table of Contents

Research and Development

The Company believes that its future success depends on its ability to maintain technological leadership, which will require ongoing enhancements of its products and the development of new applications and products that provide 3-D measurement solutions. Accordingly, the Company intends to continue to make substantial investments in the development of new technologies, the commercialization of new products that build on the Company’s existing technological base and the enhancement and development of additional applications for its products.

The Company’s research and development efforts are directed primarily at enhancing the functional adaptability of its current products and developing new and innovative products that respond to specific requirements of the emerging market for 3-D measurement systems. The Company’s research and development efforts have been devoted primarily to mechanical hardware, electronics and software. The Company’s engineering development efforts will continue to focus on enhancing its existing products and developing new products for the CAM2 market. The field of CAM2 and more broadly, 3-D measurement, continues to expand and new technologies and applications will be essential to competing in this market. Research and development activities, especially with respect to new products and technologies, are subject to significant risks, and there can be no assurance that any of the Company’s research and development activities will be completed successfully or on schedule, or, if completed, will be commercially accepted.

At December 31, 2010, the Company employed 87 scientists and technicians in its research and development efforts. Research and development expenses were approximately $12.7 million in 2010, compared to $12.6 million in 2009 and 2008.

Intellectual Property

The Company holds or has pending 133 patents in the United States and related patents worldwide which generally expire on a rolling basis between 2011 and 2029. The Company also has 23 registered or pending trademarks in the United States and worldwide which generally expire on a rolling basis between 2011 and 2021.

The Company relies on a combination of contractual provisions and trade secret laws to protect its proprietary information. There can be no assurance that the steps taken by the Company to protect its trade secrets and proprietary information will be sufficient to prevent misappropriation of its proprietary information or preclude third-party development of similar intellectual property.

Despite the Company’s efforts to protect its proprietary rights, unauthorized parties may attempt to copy aspects of the Company’s products or to obtain and use information that the Company regards as proprietary. The Company intends to vigorously defend its proprietary rights against infringement by third parties. However, policing unauthorized use of the Company’s products is difficult, particularly overseas, and the Company is unable to determine the extent to which piracy of its software products exists. In addition, the laws of some foreign countries do not protect the Company’s proprietary rights to the same extent as the laws of the United States. The Company’s success and its ability to maintain its competitive position depends, in large part, on its ability to protect its intellectual property.

The Company does not believe that any of its products infringe on the proprietary rights of third parties. There can be no assurance, however, that third parties will not claim infringement by the Company with respect to current or future products. Any such claims, with or without merit, could be time consuming, result in costly litigation, cause product shipment delays or require the Company to enter into royalty or licensing agreements. Such royalty or licensing agreements, if required, may not be available on terms acceptable to the Company, which could have a material adverse effect upon the Company’s business, operating results and financial condition

7

Table of Contents

Manufacturing and Assembly

The Company manufactures its FaroArm, FARO Gage, FARO 3D Imager and FARO Laser Tracker ION products in the Company’s manufacturing facilities located in Florida and Pennsylvania for customer orders from the Americas, in its manufacturing facility located in Switzerland for customer orders from the Europe/Africa region, and in its manufacturing facility located in Singapore for customer orders from the Asia/Pacific region. The Company manufactures its FARO Focus^3D product in its facility located in Stuttgart, Germany. The Company expects all its existing plants to have the production capacity necessary to support its volume requirements through 2011.

Manufacturing consists primarily of assembling and integrating components and subassemblies purchased from suppliers, into finished products. The primary components, which include machined parts and electronic circuit boards, are produced by subcontractors according to the Company’s specifications. All products are assembled, calibrated and tested for accuracy and functionality before shipment. The Company performs limited in-house circuit board assembly and component part machining. Typically, the Company enters into purchase commitments for manufacturing components to cover production requirements for 60 to 90 days.

The Company’s manufacturing, engineering, and design headquarters have been registered to the ISO-9001 standard since July 1998. Semi-annual surveillance audits have documented continuous improvement to this multinational standard. The Company continues to examine its scope of registration as its business evolves and has chosen English as the standard business language for its operations.

This has been done in concert with the ISO9001:2008 Quality Management System Certification, and is expected to increase the quality of the Company’s processes, products and services worldwide. Additionally, the Company takes a global approach to ISO17025:2005 regarding the recognition of the Competence of Calibration and Testing Laboratories, seeking to have all locations registered with similar scopes of accreditation and capabilities for the products generated and serviced.

Currently the Company’s manufacturing sites in Lake Mary, Florida, Kennett Square, Pennsylvania, Stuttgart, Germany, Schaffhausen, Switzerland and Singapore are jointly registered to ISO-9001 and ISO17025. In addition, the Company’s service sites in the United States, Germany, India, Japan, China, Singapore and Brazil have joint certification and accreditation to these key standards.

Competition

The Company’s portable measurement systems compete in the broad and highly competitive market for measurement devices for manufacturing and industrial applications, which, in addition to portable articulated arms, laser tracker, 3D imaging and laser scanner products, consist of fixed-base CMMs, templates and go/no-go gages, check fixtures, handheld measurement tools, and various categories of surveying equipment. In the FARO Gage product line, the Company competes with a number of manufacturers of handheld measurement tools and fixed-base CMMs, including some large, well-established companies. In the FaroArm, FARO Laser ScanArm, FARO Laser Tracker ION, FARO Focus^3D and FARO 3D Imager AMP product lines, the Company competes primarily with Hexagon Metrology, a division of Hexagon, and with Steinbichler Optotechink GmbH and GOM mbh in the 3D Imager product lines. The Company also competes in these product lines with a number of other smaller competitors. The Company competes on the basis of technical innovation, product performance, quality and price with respect to all of its products.

The Company will be required to make continued investments in technology and product development to maintain and extend the technological advantage that it believes it currently has over its competition. Some of the Company’s competitors, including some manufacturers of fixed-based CMMs and Hexagon, possess substantially greater financial, technical, and marketing resources than the Company possesses. Moreover, the Company cannot be certain that its technology or its product development efforts will allow the Company to

8

Table of Contents

successfully compete as the industry evolves. As the market for the Company’s portable measurement systems expands, additional competition may emerge and the Company’s existing and future competitors may commit more resources to the markets in which the Company participates.

Government Regulation

The Company’s operations are subject to numerous governmental laws and regulations, including those governing antitrust and competition, the environment, import and export of products, currency conversions and repatriation, taxation of foreign earnings and earnings of expatriate personnel and use of local employees and suppliers. The Company’s foreign operations are subject to the U.S. Foreign Corrupt Practices Act, or FCPA, and similar foreign anti-corruption laws which makes illegal any payments to government officials or government employees that are intended to induce their influence to assist the Company or to gain any improper advantage for the Company. The Company operates in certain regions that are more highly prone to risk under these anti-corruption laws.

Manufacturers of electrical goods are subject to the European Union’s RoHS and WEEE directives, which took effect during 2006. RoHS prohibits the use of lead, mercury and certain other specified substances in electronics products, and WEEE makes producers of electrical goods financially responsible for specified collection, recycling, treatment, and disposal of covered electronic products and components. Parallel initiatives are being proposed in other jurisdictions, including several states in the United States and China.

The Company currently holds WEEE registration and is in compliance with the directives of the European Union. The Company’s products are currently exempt from the RoHS directive, although the Company expects to have all products in compliance in 2011. However, if the Company is unable to do so, and the RoHS exemption is removed, it would be unable to sell its products in European Union countries and China as well as several possible states in the United States, which would have a material adverse effect on its sales and results of operations.

Backlog

At December 31, 2010, the Company had orders representing approximately $23.0 million in sales outstanding. The majority of these specific orders were shipped by February 12, 2011, and, as of February 11, 2011, the Company had orders representing approximately $26.1 million in sales outstanding. At December 31, 2009 and 2008, the Company had orders representing approximately $17.6 million and $11.4 million in sales outstanding, respectively.

The Company’s increase in backlog at December 31, 2010 is primarily related to the increase in orders at the end of the fourth quarter of 2010. The Company believes that substantially all of the outstanding sales orders as of February 12, 2011 will be shipped during 2011.

Employees

At December 31, 2010, the Company had 781 full-time employees, consisting of 300 sales and marketing professionals, 127 production staff, 87 research and development staff, 104 administrative staff, and 163 customer service/application engineering specialists. The Company is not a party to any collective bargaining agreements and believes its employee relations are satisfactory. Management believes that its future growth and success will depend in part on its ability to retain and continue to attract highly skilled personnel. The Company anticipates that it will be able to obtain the additional personnel required to satisfy its staffing requirements over the foreseeable future.

9

Table of Contents

Geographic Information

The Company has three reportable segments based upon geographic regions: Americas, Europe/Africa and Asia Pacific. The Company develops, manufactures, markets, supports and sells CAD-based quality assurance products integrated with CAD-based inspection and statistical process control software in each of these regions. These activities represent approximately 99% of consolidated sales. The Company evaluates performance and allocates resources based upon profitable growth and assets deployed. Information regarding the Company’s net sales, operating income, and long-lived assets by geographic region is set forth in Note 17 to the Consolidated Financial Statements under Part II. Item 8 to this Annual Report on Form 10-K.

Available Information

The Company makes available, free of charge on its Internet website at http://www.faro.com, its Annual Report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and any amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended, or the Exchange Act, as soon as reasonably practicable after they are electronically filed with, or furnished to, the Securities and Exchange Commission, or the SEC. You can find these reports on the Company’s website at www.faro.com under the heading “Investor”. The information on the Company’s website is not a part of this Annual Report on Form 10-K.

These reports may also be obtained at the SEC’s Public Reference Room at 100 F Street NE, Washington, DC 20549. Information on the operation of the Public Reference Room is available by calling the SEC at (800) SEC-0330. You may also access this information at the SEC’s website at http://www.sec.gov. This site contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC.

The statements under this heading describe the most significant risks to the Company’s business identified by management and should be considered carefully in conjunction with the discussion under the heading “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the Company’s “Notes to Consolidated Financial Statements” included in Part II, Item 8 of this Annual Report on Form 10-K.

The following is a discussion of risks and uncertainties that the Company believes could, individually or in the aggregate, cause its actual results to differ materially from expected and past results. However, predicting or identifying all such risks and uncertainties is not possible. As a result, the following factors should not be considered to be a complete discussion of the Company’s risks and uncertainties.

Competitors may develop products that make the Company’s products obsolete or less competitive.

The CAM2 market is characterized by rapid technological change. Competitors may develop new or improved products, processes or technologies that may make the Company’s products obsolete or less competitive.

As a result, the Company’s success depends, in part, on its ability to maintain its technological advantage by developing new products and applications and enhancing its existing products, which can be complex and time-consuming and require substantial investment by the Company. Significant delays in new product releases or difficulties in developing new products could adversely affect the Company’s business, revenues and results of operations. The Company can provide no assurance that it will be able to adapt to evolving markets and technologies or maintain its technological advantage.

10

Table of Contents

The Company’s financial performance is dependent on the conditions of the automotive, aerospace, and heavy equipment industries, which have recently experienced and may again experience significant disruptions in the current economic environment.

A significant portion of the Company’s sales are to manufacturers in the automotive, aerospace and heavy equipment industries. The Company is dependent upon the continued viability and financial stability of its customers in these industries, which are highly cyclical and dependent upon the general health of the economy and consumer spending.

Customers’ buying process for the Company’s products is highly decentralized and typically requires significant time and expense for the Company to further penetrate the potential market of a specific customer, which may delay its ability to generate additional revenue.

The Company’s success depends, in part, on its ability to further penetrate its customer base. During 2010, approximately 59% of the Company’s revenue was attributable to sales to its existing customers. If the Company is not able to continue to further penetrate its existing customer base, its sales growth may decline. However, most of the Company’s customers have a decentralized buying process for measurement devices, and the Company must spend significant time and resources to increase revenues from a specific customer. For example, the Company may provide products to only one of its customer’s manufacturing facilities or for a specific product line within a manufacturing facility. The Company cannot offer any assurance that it will be able to maintain or increase the amount of sales to its existing customers, which could adversely affect its financial condition and target financial results.

The Company’s ability to protect its patents and proprietary rights in the United States and foreign countries could adversely affect its revenues.

The Company’s success depends, in large part, on its ability to obtain and maintain patents and other proprietary right protection for its processes and products in the United States and other countries. The Company also relies upon trade secrets, technical know-how and continuing inventions to maintain its competitive position. The Company seeks to protect its technology and trade secrets, in part, by confidentiality agreements with its employees and contractors. However, the Company’s employees may breach these agreements or the Company’s trade secrets may otherwise become known or be independently discovered by inventors. If the Company is unable to obtain or maintain protection of its patents, trade secrets and other proprietary rights, it may not be able to prevent third parties from using its proprietary rights, which could have a material adverse effect on the Company’s results of operations.

The Company’s patent protection involves complex legal and technical questions. Its patents may be challenged, narrowed, invalidated or circumvented. Further, the Company may be able to protect its proprietary rights from infringement by third parties only to the extent that its proprietary processes and products are covered by valid and enforceable patents or are effectively maintained as trade secrets. Furthermore, others may independently develop similar or alternative technologies or design around the Company’s patented technologies. Litigation or other proceedings to defend or enforce its intellectual property rights could require the Company to spend significant time and money, which could have an adverse impact on the Company’s financial condition.

Claims from others that the Company infringes their intellectual property rights may adversely affect its business and financial condition.

From time to time, the Company receives notices from others claiming it infringes their intellectual property rights. Responding to these claims may require the Company to enter into royalty or licensing agreements on unfavorable terms, require it to stop selling or to redesign affected products, or require it to pay damages. In addition, from time to time, the Company is involved in intellectual property lawsuits. On July 11, 2008, Nikon Metrology, Inc. (formerly Metris USA, Inc.) filed a complaint for patent infringement against the Company concerning two U.S. patents. The Company believes that it does not infringe the asserted patents and that the

11

Table of Contents

patents are invalid. Although it is not possible to predict with certainty the outcome of every claim and lawsuit, the Company believes that the complaint by Nikon will not have a material impact on the Company’s results. However, the Company could in the future incur judgments or enter into settlements of lawsuits and claims that could have a material adverse effect on the Company’s financial condition. Any litigation or interference proceedings, regardless of their outcome, may be costly and may require significant time and attention of the Company’s management and technical personnel.

Product failures or product availability and performance issues could result in increased warranty costs, delays in new product introductions and enhancements and adversely affect the Company’s business.

The Company regularly introduces new products and enhances existing products. Product failures in new or existing products of the Company could result in increased warranty costs and delays in new product introductions, which could lead to a loss of sales and customers and have an adverse effect on the Company’s business and financial condition.

The Company may not be able to achieve financial results within its target goals, and its operating results may fluctuate due to a number of factors, many of which are beyond its control.

The Company’s ability to achieve financial results that are within its goals is subject to a number of factors beyond its control. Moreover, the Company’s annual and quarterly operating results have varied significantly in the past and likely will vary significantly in the future. Factors that cause the Company’s financial results to fluctuate include, but are not limited to, the following:

Any one or a combination of these factors could adversely affect the Company’s annual and quarterly operating results in the future and could cause it to fail to achieve its target financial results.

12

Table of Contents

The Company’s growth depends on the ability of the Company’s products to attain broad market acceptance.

The market for traditional fixed-base CMMs, check fixtures, handheld measurement tools, and surveying equipment is mature. Part of the Company’s strategy is to continue to displace these traditional measurement devices. Displacing traditional measurement devices and achieving broad market acceptance of the Company’s products requires significant effort to convince manufacturers to reevaluate their historical measurement procedures and methodologies.

The CAM2 market is emerging and the potential size and growth rate of this market is uncertain and difficult to quantify. If the CAM2 market does not continue to expand or does not expand as quickly as the Company anticipates, it may not be able to grow its sales, which may affect its financial results.

The Company markets six closely interdependent products (FaroArm, FARO Laser ScanArm, FARO Focus^3D, FARO Laser Tracker ION, FARO Gage and FARO 3D Imager AMP) and related software for use in measurement, inspection, and high density surveying applications. Substantially all of the Company’s revenues are currently derived from sales of these products and software, and it plans to continue its business strategy of focusing on the portable software-driven, 3-D measurement and inspection market. Consequently, the Company’s financial performance will depend in large part on portable, computer-based measurement, inspection, and high density surveying products achieving broad market acceptance. If its products cannot attain broad market acceptance, the Company will not grow as anticipated and may be required to make increased expenditures on research and development for new applications or new products.

The Company competes with manufacturers of portable measurement systems and traditional measurement devices, many of which have more resources than the Company and may develop new products and technologies.

The broad market for measurement devices is highly competitive. In the FARO Gage product line, the Company competes with manufacturers of handheld measurement tools and fixed-base CMMs, including some large, well-established companies. In the FaroArm, FARO Laser ScanArm, FARO Laser Tracker ION, FARO Focus^3D and FARO 3D Imager AMP product lines, the Company competes primarily with Hexagon Metrology, a division of Hexagon, and with Steinbichler Optotechink GmbH and GOM mbh in the 3D Imager product lines. The Company also competes in these product lines with a number of other smaller competitors. The Company competes on the basis of technical innovation, product performance, quality, and price with respect to all of its products.

The Company will be required to make continued investments in technology and product development to maintain the technological advantage that it believes it currently has over its competition. Some of its competitors, including some manufacturers of fixed-base CMMs and Hexagon, possess substantially greater financial, technical, and marketing resources than it possesses. Moreover, the Company cannot be certain that its technology or its product development efforts will allow it to successfully compete as the industry evolves. As the market for its portable measurement systems expands, additional competition may emerge and the Company’s existing and future competitors may commit more resources to the markets in which the Company participates. The Company’s results of operations could be adversely affected by pricing strategies pursued by competitors or technological or product developments by competitors.

The Company derives a substantial part of its revenues from its international operations, which are subject to greater volatility and often require more management time and expense to achieve profitability than its domestic operations.

The Company derives more than half of its revenues from international operations. The Company’s international operations are subject to various risks, including:

13

Table of Contents

Several of the countries where the Company operates have emerging or developing economies, which may be subject to greater currency volatility, negative growth, high inflation, limited availability of foreign exchange and other risks. These factors may harm the Company’s results of operations and any measures that it may implement to reduce the effect of volatile currencies and other risks of its international operations may not be effective.

Because a significant portion of the Company’s revenues and expenses are denominated in foreign currencies, the Company faces significant exposure to foreign exchange rate risk.

Approximately 62% of the Company’s sales are denominated in currencies other than the U.S. dollar. As a result, the Company’s results of operations are affected by fluctuations in exchange rates, which can cause significant fluctuations in the Company’s quarterly and annual results of operations. Fluctuations in exchange rates between the U.S. dollar and such foreign currencies may have a material adverse effect on the business, results of operations and financial condition, and could specifically result in foreign exchange gains and losses. To the extent that the percentage of its non-U.S. dollar revenues derived from international sales increases in the future, the Company’s exposure to risks associated with fluctuations in foreign exchange rates will increase.

Any failure to comply with the Company’s settlement of the Foreign Corrupt Practices Act Matter or anti-corruption laws could subject the Company to fines and penalties.

The Company has entered into settlement agreements and documents with the SEC and the Department of Justice, or DOJ, concerning certain payments made by the Company’s China subsidiary that may have violated the Foreign Corrupt Practices Act, or the FCPA, and other applicable laws, which we refer to as the FCPA Matter, pursuant to which the Company has, among other things, continuing obligations with the SEC and the DOJ with respect to compliance with the FCPA and other laws, full cooperation with the government, and the adoption of a compliance code containing specific provisions intended to prevent violations of the FCPA. Any failure to comply with any such continuing obligations could result in the SEC and the DOJ seeking to impose penalties against the Company in the future. In addition, many countries in which the Company operates have increased regulation regarding anti-corruption practices generally. Compliance with such regulations could be costly and could adversely impact the Company’s results of operations or delay entry into new markets.

The Company may not be able to identify, consummate or achieve expected benefits from acquisitions, which could harm its growth.

The Company’s growth strategy partly depends on its ability to obtain additional technologies, complementary product lines and sales channels through selective acquisitions and strategic investments. The Company may not be able to identify and successfully negotiate suitable acquisitions, obtain financing for future acquisitions, if necessary, on satisfactory terms or otherwise complete acquisitions in the future. In the past, the Company has used its stock as consideration for acquisitions. The Company’s common stock may not remain at a price at which it can be used as consideration for acquisitions without diluting the Company’s existing shareholders, and potential acquisition candidates may not view the Company’s stock attractively.

In addition, realization of the benefits of acquisitions often requires integration of some or all of the sales and marketing, distribution, manufacturing, engineering, finance and administrative organizations of the acquired

14

Table of Contents

companies. The integration of acquisitions demands substantial attention from senior management and the management of the acquired companies. Any acquisition may be subject to a variety of risks and uncertainties including:

The Company cannot offer any assurance that it will be able to identify or complete suitable acquisitions, integrate successfully any acquisitions, that any acquired companies will operate profitably, or that it will realize the expected benefits from any acquisition.

The Company may face difficulties managing the effects of its growth.

If its business grows rapidly in the future, the Company expects it to result in:

If the Company is not able to manage the effects of its future growth, its business, financial condition and operating results may be harmed.

The Company’s dependence on suppliers for materials could impair its ability to manufacture its products.

Outside vendors provide key components used by the Company in the manufacture of its products. Although the Company believes that alternative sources for these components are available, any supply interruption in a limited source component would harm its ability to manufacture its products until a new source of supply is identified. In addition, an uncorrected defect or supplier’s variation in a component, either known or unknown to the Company, or incompatibility with its manufacturing processes could harm its ability to manufacture its products. The Company may not be able to find a sufficient alternative supplier in a reasonable period, or on commercially reasonable terms, if at all. If the Company fails to obtain a supplier for the manufacture of components of its potential products, it may experience delays or interruptions in its operations, which would adversely affect its business, results of operations and financial condition.

The Company’s failure to attract and retain qualified personnel could lead to a loss of sales or decreased profitability or growth.

The Company may not be able to attract and retain sufficient qualified personnel to support its growth. In addition, the loss of the Company’s Chief Executive Officer, or other key personnel, could adversely affect its sales, profitability, or growth. Moreover, the Company continues to rely in part on equity awards to attract and retain qualified personnel, which may result in an increase in compensation expense.

The Company is subject to risks of natural disasters.

The occurrence of one or more natural disasters, such as tornadoes, hurricanes, earthquakes, floods and other forms of severe weather in any region where the Company has a facility could result in physical damage to, and complete or partial closure of, one or more of the Company’s manufacturing facilities, which could adversely affect the Company’s business, operations and financial performance. Interruptions in the Company’s

15

Table of Contents

manufacturing operations or damage to its manufacturing facilities could reduce the Company’s revenues and increase its costs, and the extent of losses from natural disasters and severe weather will be a function of both the severity of the event and the total amount of insured exposure. Although the Company maintains insurance coverage, it can offer no assure that its insurance coverage will be adequate to cover any losses or that it will be able to maintain insurance at a reasonable cost in the future. If losses from business interruption or property damage exceed the amounts for which the Company is insured, the Company’s business, results of operations and financial condition could be adversely affected.

The Company may experience volatility in its stock price.

The price of the Company’s common stock has been, and may continue to be, highly volatile in response to various factors, many of which are beyond its control, including:

The market price of the Company’s common stock may also be affected by its inability to meet analyst and investor expectations and failure to achieve projected financial results. Any failure to meet such expectations or projected financial results, even if minor, could cause the market price of the Company’s common stock to decline. Volatility in its stock price may result in the inability of the Company’s shareholders to sell their shares at or above the price at which they purchased them.

In addition, stock markets have generally experienced a high level of price and volume volatility, and the market prices of equity securities of many companies have experienced wide price fluctuations not necessarily related to the operating performance of such companies. These broad market fluctuations may adversely affect the market price of the Company’s common stock. In the past, securities class action lawsuits frequently have been instituted against such companies following periods of volatility in the market price of such companies’ securities. If any such litigation is instigated against the Company, it could result in substantial costs and a diversion of management’s attention and resources, which could have a material adverse effect on its results of operations and financial condition.

Anti-takeover provisions in the Company’s articles of incorporation, its bylaws and provisions of Florida law could delay or prevent a change of control that you may favor.

The Company’s articles of incorporation, its bylaws and provisions of Florida law could make it more difficult for a third party to acquire the Company. Although the Company believes such provisions are appropriate to protect long-term value for its shareholders, these provisions could discourage potential takeover attempts and could adversely affect the market price of the Company’s shares. Because of these provisions, you might not be able to receive a premium on your investment. These provisions include:

16

Table of Contents

The provisions described above could delay or make more difficult transactions involving a change in control of the Company or its management.

None.

The Americas

The Company’s headquarters are located in a leased building in Lake Mary, Florida containing approximately 46,000 square feet. This facility houses the Company’s sales, marketing, customer service/application operations and administrative staff. The Company’s U.S. production, research and development and manufacturing are located in a leased building in Lake Mary, Florida consisting of approximately 35,000 square feet. The Company also has a leased facility consisting of two buildings totaling approximately 37,000 square feet located in Kennett Square, Pennsylvania containing research and development, manufacturing and service operations of the laser tracker product lines.

Europe/Africa

The Company’s European headquarters are located in a leased building in Stuttgart, Germany containing approximately 62,000 square feet. This facility houses the manufacturing, administration, sales, marketing and service management personnel for the Company’s European operations. Additionally, the Company has a leased facility consisting of approximately 16,000 square feet located in Schaffhausen, Switzerland containing manufacturing operations for the Company’s products shipped to customers in Europe and Africa.

Asia/Pacific

The Company’s Asian headquarters are located in a leased building in Singapore containing approximately 22,000 square feet. This facility houses the administration, sales, marketing, production, service management personnel and manufacturing for the Company’s Asian operations. The Company’s Japan headquarters are located in a leased building in Nagoya, Japan containing approximately 17,000 square feet. This facility houses the Company’s Japan sales, marketing and service operations. The Company’s China headquarters are located in a leased building in Shanghai, China containing approximately 11,000 square feet for sales, marketing and service operations.

The Company believes that its current facilities will be adequate for its foreseeable needs and that it will be able to locate suitable space for additional regional offices or enhanced production needs as necessary.

The information required by the remainder of this Item is incorporated herein by reference to Exhibit 99.1 to this Annual Report on Form 10-K.

Patent Matters—On July 11, 2008, Metris USA, Inc. and its affiliates, Metris N.V., Metris IPR N.V. and 3-D Scanners Ltd., filed a complaint against the Company for patent infringement in the U.S. District Court for the District of Massachusetts (the “Massachusetts Court”) concerning U.S. Patent Nos. 6,611,617 and 7,313,264 (hereinafter, the “patents-in-suit”). Following an acquisition by Nikon Corporation in late 2009, Metris USA, Inc. subsequently changed its name to Nikon Metrology, Inc., Metris N.V. changed its name to Nikon Metrology NV, and Metris IPR N.V. was dissolved and merged into Nikon Metrology NV. We refer to each of Nikon Metrology, Inc., Nikon Metrology NV, and 3-D Scanners Ltd. as “Plaintiffs” or “Nikon”.

17

Table of Contents

The Company responded to the complaint with counterclaims alleging that the patents-in-suit, which are generally directed to laser scanning devices, are invalid, non-infringed, and unenforceable due to fraud during prosecution of the patents in the U.S. Patent and Trademark Office. On August 31, 2009, the Massachusetts Court granted the Company’s motion to add counterclaims and defenses for violation of federal and state antitrust and unfair competition laws based on the alleged knowing assertion of invalid and fraudulent patents. The Company also filed an amended counterclaim to add the Plaintiff’s parent company, Nikon Corporation, as a counterclaim defendant.

On January 29, 2010, the Company filed a motion for summary judgment that the patents-in-suit are unenforceable due to inequitable conduct during patent prosecution. Evidentiary hearings on the issue of inequitable conduct commenced on July 19, 2010, and concluded on October 22, 2010. Post-trial briefing concluded on December 10, 2010. The Court has not yet issued a decision. On July 14, 2010, the Company filed a motion for summary judgment of non-infringement of both patents-in-suit. No hearing date has been set. In addition, during the first quarter of 2010, Nikon served a supplemental interrogatory answer revising its alleged date of conception of the patents-in-suit to an earlier date. The Company filed a motion to strike the supplemental interrogatory answer, and the parties are waiting for the hearing date on the motion. On August 31, 2010, Nikon filed a motion for summary judgment against the Company’s counterclaims for antitrust violations and unfair trade practices. The Company filed its opposition on October 12, 2010. No hearing date has been set for the motion. No further motions for summary judgment are expected to be filed. A mediation hearing was conducted on February 18, 2011 and the Company currently expects that the litigation will continue.

The Company believes that it does not infringe the patents-in-suit and/or that the patents-in-suit are invalid and unenforceable. The Company does not anticipate this lawsuit will have a material impact on the Company; however, the outcome is difficult to predict, and an adverse determination could have a material impact on the Company’s business, financial condition or results of operations.

Other than the litigation mentioned above, the Company is not involved in any other legal proceedings, other than routine litigation arising in the normal course of business, none of which the Company believes will have a material adverse effect on the Company’s business, financial condition or results of operations.

18

Table of Contents

PART II

Market Information and Holders

The Company’s common stock is listed and traded on the NASDAQ Global Select Market under the symbol “FARO”.

The following table sets forth, for the periods indicated, the high and low sales prices of the Company’s common stock as reported by the NASDAQ Stock Market:

As of February 23, 2011, the Company had 61 holders of record of common stock.

Dividends

The Company has not paid any cash dividends on its common stock to date. The Company expects to retain future earnings for use in operating and expanding its business and does not anticipate paying any cash dividends in the reasonably foreseeable future.

Recent Sales of Unregistered Securities

During the year ended December 31, 2010, the Company did not sell any equity securities that were not registered under the Securities Act of 1933, as amended, or the Securities Act.

Purchases of Equity Securities

On November 24, 2008, the Company’s Board of Directors approved a $30 million share repurchase program. Acquisitions for the share repurchase program will be made from time to time at prevailing prices as permitted by securities laws and other legal requirements, and subject to market conditions and other factors. The share repurchase program may be discontinued at any time. There is no restriction date or other restriction governing the period over which the Company can repurchase shares under the program. The Company did not purchase any shares in the year ended December 31, 2010 under the repurchase program.

Performance Graph

The following performance graph and related information shall not be deemed “soliciting material” or to be “filed” with the SEC, nor shall such information be incorporated by reference into any future filing under the Securities Act of 1933 or the Exchange Act, except to the extent that the Company specifically incorporates it by reference into such filing.

The following line graph compares the cumulative five-year returns on the Company’s common stock with (1) the cumulative returns of the Dow Jones U.S. Total Market Index, (2) the Dow Jones U.S. Electronic Equipment Index, (3) the NASDAQ Composite Index and (4) the Scientific & Technical Instruments Index.

19

Table of Contents

The Company previously used the two Dow Jones indices, but has changed to the NASDAQ Composite Index as the broad equity market index and the Scientific & Technical Instruments Index as the published industry index, because these indices represent companies more comparable to FARO.

For purposes of preparing the graph, we assumed that an investment of $100 was made at market close on December 30, 2005, the last trading day before the beginning of the Company’s fifth preceding fiscal year, with reinvestment of any dividends at the time they were paid. The Company did not pay any dividends during the period indicated.

The comparison in the graph below is based on historical data and is not necessarily indicative of future performance of the Company’s common stock.

COMPARISON OF CUMULATIVE TOTAL RETURN

ASSUMES $100 INVESTED ON JAN. 01,2006

ASSUMES DIVIDEND REINVESTED

FISCAL YEAR ENDING DEC. 31,2010

20

Table of Contents

The following information should be read in conjunction with the Consolidated Financial Statements of the Company, including the notes thereto, included in Part II. Item 8 of this Annual Report on Form 10-K.

Overview

The Company designs, develops, manufactures, markets and supports portable, software driven, 3-D measurement and imaging systems used in a broad range of manufacturing, industrial, building construction and forensic applications. The Company’s FaroArm, FARO Laser ScanArm and FARO Gage articulated measuring devices, the FARO Laser Tracker ION, the FARO Focus^3D, the FARO 3D Imager AMP and their companion CAM2 software systems provide for CAD-based inspection, and high-density surveying and other applications. Together, these products integrate the measurement, quality inspection, and reverse engineering functions with CAD software to improve productivity, enhance product quality and decrease rework and scrap in the manufacturing process.

The Company derives revenues primarily from the sale of its measurement equipment and their related multi-faceted CAM2 software programs. Revenue related to these products is generally recognized upon shipment. In addition, the Company sells one and three-year extended warranties and training and technology consulting services relating to its products. The Company recognizes the revenue from extended warranties on a straight-line basis. The Company also receives royalties from licensing agreements for its historical medical technology and recognizes the revenue from these royalties as licensees use the technology.

21

Table of Contents

The Company operates in international markets throughout the world and maintains sales offices in France, Germany, Great Britain, Japan, Spain, Italy, Turkey, China, India, Poland, the Netherlands, Malaysia, Thailand, Singapore and Vietnam. The Company manages and reports its global sales in three regions: the Americas, Europe/Africa and Asia/Pacific.

The Company manufactures its FaroArm, FARO Gage, FARO 3D Imager AMP, and FARO Laser Tracker ION products in its manufacturing facility located in Switzerland for customer orders from the Europe/Africa region, in its manufacturing facility located in Singapore for customer orders from the Asia/Pacific region, and in its manufacturing facilities located in Florida and Pennsylvania for customer orders from the Americas. The Company manufactures its FARO FOCUS^3D product in its facility located in Stuttgart, Germany. The Company expects all its existing plants to have the production capacity necessary to support its volume requirements through 2011.

The Company accounts for wholly owned foreign subsidiaries in the currency of the respective foreign jurisdiction, and therefore, fluctuations in exchange rates may have an impact on inter-company accounts reflected in the Company’s consolidated financial statements. The Company is aware of the availability of off-balance sheet financial instruments to hedge exposure to foreign currency exchange rates, including cross-currency swaps, forward contracts and foreign currency options. However, it does not regularly use such instruments, and none were utilized in 2010, 2009 or 2008.

The Company was profitable in each quarter in the year ended December 31, 2010. The Company incurred a net loss in the year ended December 31, 2009, primarily as a result of a decrease in product sales. The Company attributes the decrease in product sales principally to the decline of the global economy. Prior to 2009, the Company had a history of sales and earnings growth and 26 consecutive profitable quarters through December 31, 2008. Its historical sales and earnings growth were the result of a number of factors, including: continuing market demand for and acceptance of the Company’s products; increased sales activity in part through additional sales staff worldwide, new products and product enhancements such as the and FARO Focus^3D and FARO 3D Imager AMP and the effect of acquisitions. However, the Company’s historical financial performance is not indicative of its future financial performance.

On December 22, 2009, the Company filed a Registration Statement on Form S-3 with the SEC registering shares of common stock, preferred stock, and warrants to purchase common and preferred stock, either individually or in units, with a proposed maximum aggregate offering price of $145 million. The proceeds from any offerings with respect to this registration statement, if any, would be used for either repayment or refinancing of debt, acquisition of additional businesses or technologies or for working capital and general corporate purposes.

FCPA Update

As previously reported by the Company, the Company conducted an internal investigation in 2006 into certain payments made by its China subsidiary that may have violated the Foreign Corrupt Practices Act or the FCPA and other applicable laws, which we refer to as the “FCPA Matter”, and entered into settlement agreements and documents with the SEC and the U.S. Department of Justice or the “DOJ”, in 2008 related to the FCPA Matter. Under the terms of the agreements with the SEC and the DOJ, the Company assumed a two-year monitoring obligation and other continuing obligations with respect to compliance with the FCPA and other laws, including full cooperation with the U.S. government and the adoption of a compliance code containing specific provisions intended to prevent violations of the FCPA. During the second quarter of 2010, the Company, in conjunction with the SEC and the DOJ, completed the selection of the FCPA monitor. As a result of delays in the SEC/DOJ approval of the monitor, the Company is currently still in the monitoring period, which otherwise would have already expired. The Company is cooperating with the monitor as the monitor implements a work plan to assess the Company’s compliance with the requirements of the settlement agreements. Failure to comply with any continuing obligations with respect to the FCPA Matter could result in the SEC and the DOJ seeking to impose penalties against the Company in the future.

22

Table of Contents

Results of Operations

The following table sets forth, for the periods presented, the percentage of sales represented by certain items in the Company’s consolidated statements of operations:

2010 Compared to 2009

Sales. Total sales increased $44.1 million, or 29.9%, to $191.8 million in the year ended December 31, 2010 from $147.7 million for the year ended December 31, 2009. This increase resulted primarily from an increase in worldwide demand for products related, in part, to the recovery in the global economy. Product sales increased by $39.6 million, or 33.6%, to $157.3 million for the year ended December 31, 2010 from $117.7 million in the year ended December 31, 2009. Service revenue increased by $4.5 million, or 15%, to $34.5 million for the year ended December 31, 2010 from $30.0 million in the year ended December 31, 2009.

Sales in the Americas region increased $17.4 million, or 31.4%, to $72.4 million for the year ended December 31, 2010 from $55.0 million in the prior year period. Product sales in the Americas region increased by $14.7 million, or 34.5%, to $56.9 million for the year ended December 31, 2010 from $42.2 million in the prior year. Service revenue in the Americas region increased by $2.7 million, or 21.1%, to $15.5 million for the year ended December 31, 2010 from $12.8 million for the prior year, primarily due to an increase in customer service revenue.

Sales in the Europe/Africa region increased $11.7 million, or 18.7%, to $74.7 million for the year ended December 31, 2010 from $63.0 million in the year ended December 31, 2009. Product sales in the Europe/Africa region increased by $11.0 million, or 21.9%, to $61.9 million for the year ended December 31, 2010 from $50.9 million in the prior year. Service revenue in the Europe/Africa region increased by $0.7 million, or 5.6%, to $12.8 million for the year ended December 31, 2010 from $12.1 million in the prior year, primarily due to a increase in customer service revenue.

Sales in the Asia/Pacific region increased $15.0 million, or 50.5%, to $44.7 million for the year ended December 31, 2010 from $29.7 million in the year ended December 31, 2009. Product sales in the Asia/Pacific

23

Table of Contents

region increased by $13.9 million, or 56.5%, to $38.5 million for the year ended December 31, 2010 from $24.6 million in the prior year. Service revenue in the Asia/Pacific region increased by $1.1 million, or 20.8%, to $6.2 million for the year ended December 31, 2010 from $5.1 million in the same period during the prior year, primarily due to an increase in warranty revenue.

Gross profit increased by $32.7 million, or 40.5%, to $113.4 million for the year ended December 31, 2010 from $80.7 million for the year ended December 31, 2009. Gross margin increased to 59.1% for the year ended December 31, 2010 from 54.6% for the year ended December 31, 2009, primarily due to a change in the sales mix between higher-margin product sales and lower-margin service revenue resulting from an increase in product sales. Gross margin from product sales increased to 65.3% in the year ended December 31, 2010 from 60.7% for the prior year, primarily due to an increase in the product sales mix of higher margin product lines. Gross margin from service revenues remained relatively flat at 30.9% in the year ended December 31, 2010 compared to 31.0% for the prior year. The Company expects the trend of changes in the sales mix to result in gross margins in the range of approximately 55% to 60% in 2011.

Selling Expenses. Selling expenses increased by $2.1 million, or 4.3%, to $50.7 million for the year ended December 31, 2010 from $48.6 million for the year ended December 31, 2009. This increase was primarily due to an increase in commissions expense of $4.7 million, an increase in product demonstration costs of $1.3 million, and an increase in performance-based bonuses of $0.4 million, offset by a decrease in compensation costs of $3.6 million due to reduced headcount, and a decrease in travel expenses of $0.7 million.

Worldwide sales and marketing headcount decreased by 6, or 2.0%, to 300 at December 31, 2010 from 306 at December 31, 2009. Regionally, the Company’s sales and marketing headcount decreased by 9, or 10.0%, to 81 at December 31, 2010 from 90 at December 31, 2009 for the Americas; decreased by 1, or 1.0%, to 111 at December 31, 2010 from 112 at December 31, 2009 in Europe/Africa; and increased by 4, or 4.0%, in Asia/Pacific to 108 at December 31, 2010 from 104 at December 31, 2009.

As a percentage of sales, selling expenses decreased to 26.4% of sales in the year ended December 31, 2010 from 32.9% in the year ended December 31, 2009. Regionally, selling expenses were 21.9% of sales in the Americas for the year ended December 31, 2010 compared to 30.7% of sales in the year ended December 31, 2009; 30.1% of sales for Europe/Africa for the year ended December 31, 2010 compared to 34.2% of sales in the prior year; and 27.5% of sales for Asia/Pacific for the year ended December 31, 2010 compared to 34.3% of sales in the prior year.

General and administrative expenses. General and administrative expenses increased by $1.9 million, or 7.3%, to $26.8 million for the year ended December 31, 2010 from $24.9 million for the year ended December 31, 2009. General and administrative expenses increased primarily due to the $1.1 million cost of the FCPA Monitor in connection with the DOJ and SEC settlement, an increase in legal and professional fees related to patent litigation of $0.8 million, and an increase in performance based bonuses of $1.1 million, offset by a decrease in compensation costs of $0.9 million due to reduced headcount. General and administrative expenses as a percentage of sales decreased to 14.0% for the year ended December 31, 2010 from 16.9% for the year ended December 31, 2009.

Depreciation and amortization expenses. Depreciation and amortization expenses increased by $0.8 million to $6.3 million for the year ended December 31, 2010 from $5.5 million for the year ended December 31, 2009 as a result of an increase in property, equipment and intangible assets.

Research and development expenses. Research and development expenses increased $0.1 million, or 0.6%, to $12.7 million for year ended December 31, 2010 from $12.6 million for the year ended December 31, 2009, primarily due to an increase in performance-based bonuses of $0.8 million, offset by decreases in materials of $0.1 million and subcontractor expenses of $0.6 million. Research and development expenses as a percentage of sales decreased to 6.6% for the year ended December 31, 2010 from 8.5% for the year ended December 31, 2009.

24

Table of Contents

Interest income / expense. Interest income, net, decreased by $0.1 million to $0.1 million for the year ended December 31, 2010 from $0.2 million for the year ended December 31, 2009, due to a decrease in interest rates related to cash and short term investments.

Other (income) expense, net. Other (income) expense, net increased by $3.4 million to $2.8 million of expense for the year ended December 31, 2010, from income of $0.6 million for the year ended December 31, 2009, primarily as a result of an increase in foreign currency losses related to the effects of the decline in the Euro on the value of intercompany account balances denominated in different currencies with the Company’s European subsidiaries.

Income tax expense. Income tax expense increased by $2.7 million to $3.1 million for the year ended December 31, 2010 from $0.4 million for the year ended December 31, 2009, primarily due to an increase in pretax income. Income tax expense in the year ended December 31, 2009 included $2.6 million related to a settlement with the Internal Revenue Service in the fourth quarter of 2009 of an audit of the Company’s federal corporate income tax returns for the period 2005 to 2007 related to the valuation of certain intangible assets contributed to a foreign subsidiary of the Company under a R&D Cost Sharing Arrangement entered into in 2001. Excluding the effects of the $2.6 million tax settlement, the Company’s effective tax benefit rate would have been 21.7% for 2009. The Company believes that calculating its effective tax rate without the impact of the IRS settlement is useful to management and investors to provide greater clarity and to facilitate internal and external comparisons to the Company’s historical tax rate. The Company’s effective tax rate was 22.1% for the year ended December 31, 2010 compared to a tax benefit rate of 21.7%, excluding the effects of the $2.6 million tax settlement for the year ended December 31, 2009. Total deferred tax assets for the Company’s foreign subsidiaries relating to net operating loss carryforwards were $14.1 million and $12.2 million at December 31, 2010 and 2009, respectively. The related valuation allowance was $11.1 million and $10.6 million at December 31, 2010 and 2009, respectively. The Company released a valuation allowance of approximately $1.2 million related to net operating losses of a subsidiary in Germany as a result of being included in a group consolidated tax filing with net taxable earnings. The Company’s tax rate continues to be lower than the statutory tax rate in the United States primarily as a result of favorable tax rates in foreign jurisdictions. However, the Company’s tax rate could be impacted positively or negatively by geographic changes in the manufacturing or sales of its products and the resulting effect on taxable income in each jurisdiction.

Net income. Net income increased by $21.7 million to $11.1 million for the year ended December 31, 2010 from a net loss of $10.6 million for the year ended December 31, 2009 as a result of the factors described above.

2009 Compared to 2008

Sales. Total sales decreased by $61.5 million, or 29.4%, to $147.7 million in the year ended December 31, 2009 from $209.2 million for the year ended December 31, 2008. This decrease resulted primarily from a decrease in unit sales in all regions related to the weakness in the global economy. Product sales decreased by $61.5 million, or 34.3%, to $117.7 million for the year ended December 31, 2009 from $179.2 million in the year ended December 31, 2008. Service revenue remained flat at $30.0 million in 2009 and 2008.

Sales in the Americas region decreased $23.3 million, or 29.8%, to $55.0 million for the year ended December 31, 2009 from $78.3 million in the prior year period. Product sales in the Americas region decreased by $23.9 million, or 36.1%, to $42.3 million for the year ended December 31, 2009 from $66.2 million in the prior year. Service revenue in the Americas region increased by $0.7 million, or 5.8%, to $12.8 million for the year ended December 31, 2009 from $12.1 million for the prior year.

Sales in the Europe/Africa region decreased $30.6 million, or 32.7%, to $63.0 million for the year ended December 31, 2009 from $93.6 million in the year ended December 31, 2008. Product sales in the Europe/Africa region decreased by $29.4 million, or 36.7%, to $50.8 million for the year ended December 31, 2009 from $80.2 million in the prior year. Service revenue in the Europe/Africa region decreased by $1.3 million, or 9.7%, to $12.1 million for the year ended December 31, 2009 from $13.4 million in the prior year, primarily due to a decrease in customer service and training revenue.

25

Table of Contents

Sales in the Asia/Pacific region decreased $7.6 million, or 20.4%, to $29.7 million for the year ended December 31, 2009 from $37.3 million in the year ended December 31, 2008. Product sales in the Asia/Pacific region decreased by $8.2 million, or 25.2%, to $24.6 million for the year ended December 31, 2009 from $32.8 million in the prior year. Service revenue in the Asia/Pacific region increased by $0.6 million, or 13.3%, to $5.1 million for the year ended December 31, 2009 from $4.5 million in the same period during the prior year, primarily due to an increase in warranty revenue.

Gross profit decreased by $44.5 million, or 35.6%, to $80.7 million for the year ended December 31, 2009 from $125.2 million for the year ended December 31, 2008. Gross margin decreased to 54.6% for the year ended December 31, 2009 from 59.8% for the year ended December 31, 2008, primarily due to a change in the sales mix between higher-margin product sales and lower-margin service revenue resulting from a decrease in product sales. Gross margin from product sales decreased to 60.7% in the year ended December 31, 2009 from 66.1% for the prior year, primarily due to a change in the product sales mix resulting in a decrease in average unit selling prices. Gross margin from service revenues increased to 31.0% in the year ended December 31, 2009 from 22.5% for the prior year, primarily due to a decrease in customer service costs.

Selling Expenses. Selling expenses decreased by $14.4 million, or 22.9%, to $48.6 million for the year ended December 31, 2009 from $63.0 million for the year ended December 31, 2008. This decrease was primarily due to a decrease in compensation expense of $8.9 million, a decrease in travel-related expenses of $2.5 million, a decrease in marketing and advertising costs of $2.0 million, and a decrease in recruiting and training expenses of $1.0 million. As a result of the reductions-in-force implemented by the Company in 2009, the Company incurred $1.0 million in severance costs and expects to save $6.2 million in compensation costs on an annualized basis.

Worldwide sales and marketing headcount decreased by 90, or 22.7%, to 306 at December 31, 2009 from 396 at December 31, 2008. Regionally, the Company’s sales and marketing headcount decreased by 46, or 33.8%, to 90 at December 31, 2009 from 136 at December 31, 2008 for the Americas; decreased by 27, or 19.4%, to 112 at December 31, 2009 from 139 at December 31, 2008 in Europe/Africa; and decreased by 17, or 14.0%, in Asia/Pacific to 104 at December 31, 2009 from 121 at December 31, 2008.

As a percentage of sales, selling expenses increased to 32.9% of sales in the year ended December 31, 2009 from 30.1% in the year ended December 31, 2008. Regionally, selling expenses were 30.7% of sales in the Americas for the year ended December 31, 2009 compared to 29.6% of sales in the year ended December 31, 2008; 34.2% of sales for Europe/Africa for the year ended December 31, 2009 compared to 30.5% of sales in the prior year; and 34.3% of sales for Asia/Pacific for the year ended December 31, 2009 compared to 30.2% of sales in the prior year.

General and administrative expenses. General and administrative expenses decreased by $1.2 million, or 4.5%, to $24.9 million for the year ended December 31, 2009, from $26.1 million for the year ended December 31, 2008. General and administrative expenses decreased primarily due to a decrease in compensation expense of $1.8 million, a decrease in travel-related costs of $0.9 million, and a reduction in recruiting and training costs of $0.7 million, offset by an increase in the allowance for doubtful accounts of $0.5 million and an increase of $2.0 million in legal and professional fees primarily related to patent litigation and the settlement of an IRS audit. General and administrative expenses as a percentage of sales increased to 16.9% for the year ended December 31, 2009 from 12.5% for the year ended December 31, 2008. As a result of the reductions-in-force implemented by the Company in 2009, the Company incurred $0.7 million in severance costs and expects to save $3.4 million in compensation costs on an annualized basis.

Depreciation and amortization expenses. Depreciation and amortization expenses increased by $1.0 million to $5.5 million for the year ended December 31, 2009 from $4.5 million for the year ended December 31, 2008 as a result of an increase in property, equipment and intangible assets.

26

Table of Contents

Research and development expenses. Research and development expenses remained flat at $12.6 million for the years ended December 31, 2009 and 2008. Research and development expenses as a percentage of sales increased to 8.5% for the year ended December 31, 2009 from 6.0% for the year ended December 31, 2008. As a result of the reductions-in-force implemented by the Company in 2009, the Company incurred $0.1 million in severance costs and expects to save $1.8 million in compensation costs on an annualized basis.

Interest income / expense. Interest income, net, decreased by $1.5 million to $0.2 million for the year ended December 31, 2009 from $1.7 million for the year ended December 31, 2008, due to a decrease in interest rates related to cash and short term investments.

Other (income) expense, net. Other (income) expense, net increased by $2.9 million to $0.6 million of income for the year ended December 31, 2009, from an expense of $2.3 million for the year ended December 31, 2008, due to foreign currency transaction gains.

Income tax expense. Income tax expense decreased by $4.0 million to $0.4 million for the year ended December 31, 2009 from $4.4 million for the year ended December 31, 2008, primarily due to a decrease in pretax income. Income tax expense in the year ended December 31, 2009 included $2.6 million related to a settlement with the Internal Revenue Service in the fourth quarter of 2009 of an audit of the Company’s federal corporate income tax returns for the period 2005 to 2007 related to the valuation of certain intangible assets contributed to a foreign subsidiary of the Company under a R&D Cost Sharing Arrangement entered into in 2001. Excluding the effects of the $2.6 million tax settlement, the Company’s effective tax benefit rate would have been 21.7% for 2009. The Company believes that calculating its effective tax rate without the impact of the IRS settlement is useful to management and investors to provide greater clarity and to facilitate internal and external comparisons to the Company’s historical tax rate. The Company’s effective tax rate was 24.0% for the year ended December 31, 2008. Total deferred tax assets for the Company’s foreign subsidiaries relating to net operating loss carryforwards were $12.2 million and $10.2 million at December 31, 2009 and 2008, respectively. The related valuation allowance was $10.6 million and $8.7 million at December 31, 2009 and 2008, respectively. The Company’s tax rate continues to be lower than the statutory tax rate in the United States primarily as a result of favorable tax rates in foreign jurisdictions. However, the Company’s tax rate could be impacted positively or negatively by geographic changes in the manufacturing or sales of its products and the resulting effect on taxable income in each jurisdiction.

Net income. Net income decreased by $24.6 million to a net loss of $10.6 million for the year ended December 31, 2009 from net income of $14.0 million for the year ended December 31, 2008 as a result of the factors described above.

Liquidity and Capital Resources

Cash and cash equivalents increased by $15.6 million to $50.7 million at December 31, 2010 from $35.1 million at December 31, 2009. The increase was primarily attributable to an increase in net income and non-cash expenses of $21.5 million, the effect of exchange rate changes on cash of $4.2 million, and proceeds from stock option exercises of $1.4 million, offset by an increase in working capital of $6.5 million, and $5.0 million in purchases of equipment and intangible assets.

On July 11, 2006, the Company entered into a loan agreement providing for a line of credit of $30.0 million, which was most recently amended on June 18, 2009. Loans under the Amended and Restated Loan Agreement, as amended, bear interest at the rate of LIBOR plus a fixed percentage between 2.25% and 2.50%, and require the Company to maintain a minimum cash balance and tangible net worth measured at the end of each of the Company’s fiscal quarters. As of December 31, 2010, the Company was in compliance with all of the covenants under the Amended and Restated Loan Agreement, as amended. The term of the Amended and Restated Loan Agreement, as amended, extends to March 31, 2012. The Company has not drawn on this line of credit.

27

Table of Contents

In January 2010, the Company’s subsidiary in China opened a short term line of credit, expiring on July 6, 2010, with the Bank of China for approximately $2.5 million, which bore interest at 4.86%. The subsidiary drew approximately $2.5 million as a temporary loan until the process of approving an additional capital investment was approved by the Chinese government. The approval was received and the loan was repaid on April 19, 2010.

On December 22, 2009, the Company filed a Registration Statement on Form S-3 with the SEC registering shares of common stock, preferred stock, and warrants to purchase common and preferred stock, either individually or in units, with a value of up to $145 million. The proceeds from any offerings with respect to this registration statement, if any, would be used for either repayment or refinancing of debt, acquisition of additional businesses or technologies or for working capital and general corporate purposes.

The Company believes that its working capital, anticipated cash flow from operations, cash and credit facility will be sufficient to fund its long-term liquidity requirements for the foreseeable future.

Off Balance Sheet Items

None.

Contractual Obligations and Commercial Commitments

The Company is party to capital leases on equipment with an initial term of 36 to 60 months and other non-cancelable operating leases. These obligations are presented below as of December 31, 2010:

The Company enters into purchase commitments for products and services in the ordinary course of business. These purchases generally cover production requirements for 60 to 90 days. The Company has a $0.3 million liability for unrecognized tax benefits that is excluded from the contractual obligations table due to the uncertainty of the period of settlement, if any, with the respective taxing authorities.

Inflation

The Company believes that inflation has not had a material impact on its results of operations in recent years and does not expect inflation to have a material impact on its operations in 2011.

Critical Accounting Policies

The preparation of the Company’s consolidated financial statements requires the Company’s management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues, and expenses, as well as disclosure of contingent assets and liabilities. The Company bases its estimates on historical experience, along with various other factors believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Some of these judgments can be subjective and complex and, consequently, actual results may differ from these estimates under different assumptions or conditions. While for any given estimate or assumption made by the Company’s management there may be other estimates or assumptions that are

28

Table of Contents

reasonable, the Company believes that, given the current facts and circumstances, it is unlikely that applying any such other reasonable estimate or assumption would materially impact the financial statements.

In response to the SEC’s financial reporting release, FR-60, “Cautionary Advice Regarding Disclosure About Critical Accounting Policies,” the Company has selected its critical accounting policies for purposes of explaining the methodology used in the calculation in addition to any inherent uncertainties pertaining to the possible effects on its financial condition. The critical policies discussed below are the Company’s processes of recognizing revenue, the reserve for excess and obsolete inventory, income taxes, the reserve for warranties, and goodwill impairment. These policies affect current assets and operating results and are therefore critical in assessing the Company’s financial and operating condition. These policies involve certain assumptions that, if incorrect, could have an adverse impact on the Company’s operations and financial position.

Revenue Recognition

Revenue related to the Company’s measurement equipment and related software is generally recognized upon shipment, as the Company considers the earnings process substantially complete as of the shipping date. Revenue from sales of software only is recognized when no further significant production, modification or customization of the software is required and where persuasive evidence of a sales agreement exists, delivery has occurred, and the sales price is fixed or determinable and deemed collectible. Revenues resulting from sales of comprehensive support, training and technology consulting services are recognized as such services are performed. Extended maintenance plan revenues are recognized on a straight-line basis over the life of the plan. The Company warrants its products against defects in design, materials and workmanship for one year. A provision for estimated future costs relating to warranty expense is recorded when products are shipped. Costs relating to extended maintenance plans are recognized as incurred. Revenue from the licensing agreements for the use of the Company’s historical technology for medical applications is recognized when the technology is used by the licensees.

Reserve for Excess and Obsolete Inventory

Since the value of inventory that will ultimately be realized cannot be known with exact certainty, the Company relies upon both past sales history and future sales forecasts to provide a basis for the determination of the reserve. Inventory is considered obsolete if the Company has withdrawn those products from the market or had no sales of the product for the past 12 months and has no sales forecasted for the next 12 months. Inventory is considered excess if the quantity on hand exceeds 12 months of remaining usage. The resulting obsolete and excess parts are then reviewed to determine if a substitute usage or a future need exists. Items without an identified current or future usage are reserved in an amount equal to 100% of the FIFO cost of such inventory. The Company’s products are subject to changes in technologies that may make certain of its products or their components obsolete or less competitive, which may increase its historical provisions to the reserve.

Income Taxes

The Company reviews its deferred tax assets on a regular basis to evaluate their recoverability based upon expected future reversals of deferred tax liabilities, projections of future taxable income over a two-year period, and tax planning strategies that it might employ to utilize such assets, including net operating loss carryforwards. Based on the positive and negative evidence of recoverability, the Company establishes a valuation allowance against the net deferred assets of a taxing jurisdiction in which it operates, unless it is “more likely than not” that it will recover such assets through the above means. In the future, the Company’s evaluation of the need for the valuation allowance will be significantly influenced by its ability to achieve profitability and its ability to predict and achieve future projections of taxable income.

Significant judgment is required in determining the Company’s worldwide provision for income taxes. In the ordinary course of global business, there are many transactions for which the ultimate tax outcome is

29

Table of Contents

uncertain. The Company establishes provisions for income taxes when, despite the belief that tax positions are fully supportable, there remain certain positions that do not meet the minimum probability threshold as described by ASC 740, which is a tax position that is more likely than not to be sustained upon examination by the applicable taxing authority. In the ordinary course of business, the Company and its subsidiaries are examined by various federal, state, and foreign tax authorities. The Company regularly assesses the potential outcomes of these examinations and any future examinations for the current or prior years in determining the adequacy of its provision for income taxes. The Company assesses the likelihood and amount of potential adjustments and adjust the income tax provision, the current tax liability and deferred taxes in the period in which the facts that gave rise to a revision become known.

Reserve for Warranties

The Company establishes at the time of sale a liability for the one-year warranty included with the initial purchase price of equipment, based upon an estimate of the repair expenses likely to be incurred for the warranty period. The warranty period is measured in installation-months for each major product group. The warranty reserve is reflected in accrued liabilities in the accompanying consolidated balance sheets. The warranty expense is estimated by applying the actual total repair expenses for each product group in the prior period and determining a rate of repair expense per installation month. This repair rate is multiplied by the number of installation-months of warranty for each product group to determine the provision for warranty expenses for the period. The Company evaluates its exposure to warranty costs at the end of each period using the estimated expense per installation-month for each major product group, the number of units remaining under warranty and the remaining number of months each unit will be under warranty. The Company has a history of new product introductions and enhancements to existing products, which may result in unforeseen issues that increase its warranty costs. While such expenses have historically been within expectations, the Company cannot guarantee this will continue in the future.

Goodwill Impairment

Goodwill represents the excess cost of a business acquisition over the fair value of the net assets acquired. Indefinite-life identifiable intangible assets and goodwill are not amortized but are tested for impairment. The Company performs an annual review in the fourth quarter of each year, or more frequently if indicators of potential impairment exist, to determine if the carrying value of the recorded goodwill is impaired. If an asset is impaired, the difference between the value of the asset reflected on the financial statements and its current fair value is recognized as an expense in the period in which the impairment occurs.

The goodwill impairment test is applied using a two-step approach. In performing the first step, the company calculates the fair values of each reporting unit using discounted cash flows (“DCF”) for each reporting unit. If the carrying amount of the reporting unit exceeds the fair market value, the second step is performed to measure the amount of the impairment loss, if any. In the second step, the implied fair value of the goodwill is estimated as the fair value of the reporting unit as calculated in the first step, less the fair values of the net tangible and intangible assets of the reporting unit other than goodwill. If the carrying amount of goodwill exceeds its implied fair market value, an impairment loss is recognized in an amount equal to that excess, not to exceed the carrying amount of the goodwill. Management has concluded there was no goodwill impairment in the years ended December 31, 2010, 2009 and 2008.

Impact of Recently Issued Accounting Standards

In June 2009, the Financial Accounting Standards Board (“FASB”) issued guidance now codified within Accounting Standards Codification (“ASC”) Topic 810, Consolidation (“ASC 810”). ASC 810 requires entities to perform an analysis to determine whether the enterprise’s variable interest or interests give it a controlling financial interest in a variable interest entity. This analysis identifies the primary beneficiary of a variable interest entity as one with the power to direct the activities of a variable interest entity that most significantly impact the

30

Table of Contents

entity’s economic performance and obligation to absorb losses of the entity that could potentially be significant to the variable interest. The guidance is effective as of the beginning of the annual reporting period commencing after November 15, 2009, with early adoption prohibited. The adoption of ASC 810 as of January 1, 2010 did not have a material effect on the Company’s financial position or results of operations.

In October 2009, the FASB issued Accounting Standards Update (“ASU”) No. 2009-13, Multiple-Delivery Revenue Arrangements (“ASU 2009-13”). ASU 2009-13 establishes the accounting and reporting guidance for arrangements, including multiple revenue-generating activities, and provides amendments to the criteria for separating deliverables and measuring and allocating arrangement consideration to one or more units of accounting. The amendments of ASU 2009-13 also establish a selling price hierarchy for determining the selling price of a deliverable. Significantly enhanced disclosures are also required by ASU 2009-13 to provide information about a vendor’s multiple-deliverable revenue arrangements, including information about the nature and terms, significant deliverables, and its performance within arrangements. The amendments also require a reporting company to provide information about the significant judgments made and changes to those judgments and about how the application of the relative selling-price method affects the timing or amount of revenue recognition. The amendments in ASU 2009-13 are effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010, with early application permitted. The Company implemented this new standard on January 1, 2011 and does not expect the adoption of ASU 2009-13 to have a material impact on its consolidated financial statements.

In January 2010, the FASB issued ASU 2010-6, Improving Disclosures About Fair Value Measurements (“ASU 2010-6”), which requires reporting entities to make new disclosures about recurring or nonrecurring fair-value measurements, including significant transfers into and out of Level 1 and Level 2 fair-value measurements and information on purchases, sales, issuances, and settlements on a gross basis in the reconciliation of Level 3 fair-value measurements. ASU 2010-6 is effective for annual reporting periods beginning after December 15, 2009, except for Level 3 reconciliation disclosures, which are effective for annual periods beginning after December 15, 2010. The adoption of ASU 2010-6 did not have a material impact on the Company’s consolidated financial statements nor is it expected to have a material impact for the portion effective at 2010 year end.

In July 2010, the FASB issued guidance to enhance disclosures about the credit quality of a creditor’s financing receivables and the adequacy of its allowance for credit losses. The amended guidance is effective for period-end balances beginning with the first interim or annual reporting period ending on or after December 15, 2010. The amended guidance is effective for activity during a reporting period beginning with the first interim or annual reporting period beginning on or after December 15, 2010. The Company expects the amended guidance to impact its disclosures in future periods, but otherwise not have a significant effect on its consolidated financial statements.

Foreign Exchange Exposure

The Company conducts a significant portion of its business outside the United States. At present, 62.3% of its revenues are invoiced, and a significant portion of its operating expenses paid, in foreign currencies. Fluctuations in exchange rates between the U.S. dollar and such foreign currencies may have a material adverse effect on the Company’s results of operations and financial condition and could specifically result in foreign exchange gains and losses. The impact of future exchange rate fluctuations on the results of the Company’s operations cannot be accurately predicted. To the extent that the percentage of its non-U.S. dollar revenues derived from international sales increases in the future, the Company’s exposure to risks associated with fluctuations in foreign exchange rates may increase.

31

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Shareholders

FARO Technologies, Inc. and Subsidiaries

We have audited the accompanying consolidated balance sheets of FARO Technologies, Inc. (a Florida corporation) and subsidiaries as of December 31, 2010 and 2009, and the related statements of operations, shareholders’ equity and comprehensive income, and cash flows for each of the three years in the period ended December 31, 2010. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of FARO Technologies, Inc. and subsidiaries as of December 31, 2010 and 2009, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2010 in conformity with accounting principles generally accepted in the United States of America.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), FARO Technologies, Inc. and subsidiaries’ internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) and our report dated February 25, 2011 expressed an unqualified opinion.

/s/ GRANT THORNTON LLP

Orlando, Florida

February 25, 2011

32

Table of Contents

FARO TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

The accompanying notes are an integral part of these consolidated financial statements.

33

Table of Contents

FARO TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS

The accompanying notes are an integral part of these consolidated financial statements.

34

Table of Contents

FARO TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY AND COMPREHENSIVE INCOME

FOR THE YEARS ENDED DECEMBER 31, 2010, 2009, AND 2008