FARO TECHNOLOGIES INC - Quarter Report: 2013 March (Form 10-Q)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

FORM 10-Q

For the quarterly period ended March 30, 2013

OR

For the transition period from                      to                     

Commission File Number: 0-23081

FARO TECHNOLOGIES, INC.

(Exact Name of Registrant as Specified in Its Charter)

250 Technology Park, Lake Mary, Florida 32746

(Address of Principal Executive Offices) (Zip Code)

(407) 333-9911

(Registrant’s Telephone Number, including Area Code)

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    YES  x    NO  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    YES  x    NO  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

There were 17,091,324 shares of the registrant’s common stock outstanding as of April 19, 2013.

Table of Contents

FARO TECHNOLOGIES, INC.

Quarterly Report on Form 10-Q

Quarter Ended March 30, 2013

INDEX

2

Table of Contents

PART I. FINANCIAL INFORMATION

Item 1. Financial Statements

FARO TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

The accompanying notes are an integral part of these consolidated financial statements.

3

Table of Contents

FARO TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS

(UNAUDITED)

The accompanying notes are an integral part of these consolidated financial statements.

4

Table of Contents

FARO TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

(UNAUDITED)

The accompanying notes are an integral part of these consolidated financial statements.

5

Table of Contents

FARO TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(UNAUDITED)

The accompanying notes are an integral part of these consolidated financial statements.

6

Table of Contents

FARO TECHNOLOGIES, INC. AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Unaudited for the Three Months Ended March 30, 2013 and March 31, 2012

(in thousands, except share and per share data, or as otherwise noted)

NOTE A – DESCRIPTION OF BUSINESS

FARO Technologies, Inc. and its subsidiaries (collectively the “Company” or “FARO”) design, develop, manufacture, market and support software-based three-dimensional measurement and imaging systems for manufacturing, industrial, building construction and forensic applications. The Company’s principal products include the FaroArm, FARO Laser ScanArm and FARO Gage, all articulated electromechanical measuring devices, and the FARO Laser Tracker Vantage, FARO Focus^3D and FARO 3D Imager AMP, all laser-based measuring devices. Markets for the Company’s products include automobile, aerospace, heavy equipment, and law enforcement agencies. The Company sells the vast majority of its products through a direct sales force located in many of the world’s largest industrialized countries.

NOTE B – PRINCIPLES OF CONSOLIDATION

The consolidated financial statements of the Company include the accounts of FARO Technologies, Inc. and all of the Company’s subsidiaries, all of which are wholly owned. All intercompany transactions and balances have been eliminated. The financial statements of the Company’s foreign subsidiaries are translated into U.S. dollars using exchange rates in effect at period-end for assets and liabilities and average exchange rates during each reporting period for results of operations. Adjustments resulting from financial statement translations are reflected as a separate component of accumulated other comprehensive income.

NOTE C – BASIS OF PRESENTATION

The accompanying unaudited interim consolidated financial statements of the Company include all normal recurring accruals and adjustments considered necessary by management for their fair presentation in conformity with accounting principles generally accepted in the United States of America (“U.S. GAAP”). Preparing financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ materially from those estimates. The consolidated results of operations for the three months ended March 30, 2013 are not necessarily indicative of results that may be expected for the year ending December 31, 2013 or any future interim period.

The information included in this Quarterly Report on Form 10-Q, including the interim consolidated financial statements and the accompanying notes, should be read in conjunction with the audited consolidated financial statements and related notes included in the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2012.

NOTE D – RECLASSIFICATIONS

From time to time the Company may reclassify certain amounts to conform to the current period presentation.

7

Table of Contents

NOTE E – IMPACT OF RECENTLY ISSUED ACCOUNTING PRONOUNCEMENTS

In December 2011, the Financial Accounting Standards Board issued Accounting Standards Update (“ASU”) No. 2011-12, Comprehensive Income (Topic 220): Deferral of the Effective Date for Amendments to the Presentation of Reclassifications of Items Out of Accumulated Other Comprehensive Income in Accounting Standards Update No. 2011-05 (“ASU 2011-12”). ASU 2011-12 defers the specific requirement in ASU No. 2011-05 to present items that are reclassified from accumulated other comprehensive income to net income separately with their respective components of net income and other comprehensive income. As part of this update, the FASB did not defer the requirement in ASU No. 2011-05 to report comprehensive income either in a single continuous statement or in two separate but consecutive financial statements. In February 2013, the FASB issued ASU 2013-02, Comprehensive Income (Topic 220): Reporting of Amounts Reclassified out of Accumulated Other Comprehensive Income (“ASU 2013-02”), which became effective during the quarter ended March 30, 2013. The adoption of ASU 2013-02 in the quarter ended March 30, 2013, did not have any impact on the Company’s consolidated financial statements.

NOTE F – SHARE-BASED COMPENSATION

Share-based compensation cost is measured at the grant date based on the fair value of the award and is recognized over the service period, typically the vesting period. The vesting period for the share-based compensation awarded by the Company is generally three years. The Company uses the Black-Scholes option pricing model to determine the fair value of stock option grants. The Company uses the closing market price of its common stock on the date of grant to determine the fair value of restricted stock and restricted stock units.

The Company used the following assumptions for the Black-Scholes option-pricing model to determine the fair value of options granted during the three months ended March 30, 2013 and March 31, 2012:

Historical information was the primary basis for the selection of the expected dividend yield, expected volatility and the expected lives of the options. The risk-free interest rate was based on yields of U.S. zero coupon issues and U.S. Treasury issues, with a term equal to the expected life of the option being valued.

The Company recorded total share-based compensation expense of $1,100 and $836 for the three months ended March 30, 2013 and March 31, 2012, respectively.

8

Table of Contents

A summary of stock option activity and weighted-average exercise prices for the three months ended March 30, 2013 follows:

The weighted-average grant-date fair value of the stock options granted during the three months ended March 30, 2013 and March 31, 2012 was $14.64 and $22.57 per option, respectively. The total intrinsic value of stock options exercised during the three months ended March 30, 2013 and March 31, 2012 was $2.0 million and $6.1 million, respectively.

The following table summarizes the restricted stock and restricted stock unit activity and weighted average grant-date fair values for the three months ended March 30, 2013:

As of March 30, 2013, there was $8.8 million of total unrecognized stock-based compensation expense related to non-vested stock-based compensation arrangements. The expense is expected to be recognized over a weighted average period of 2.6 years.

NOTE G – SUPPLEMENTAL CASH FLOW INFORMATION

Selected cash payments and non-cash activity were as follows:

9

Table of Contents

NOTE H – CASH AND CASH EQUIVALENTS

The Company considers cash on hand and all short-term, highly liquid investments that have maturities of three months or less at the time of purchase to be cash and cash equivalents.

NOTE I – SHORT TERM INVESTMENTS

Short-term investments at March 30, 2013 and December 31, 2012 included U.S. Treasury Bills totaling $65.0 million that mature through September 19, 2013. The weighted-average interest rate on the U.S. Treasury bills is less than one percent. The investments are classified as held-to-maturity and recorded at cost. The fair value of the U.S. Treasury Bills at March 30, 2013 approximated cost plus accrued interest.

NOTE J – ACCOUNTS RECEIVABLE

Accounts receivable consist of the following:

NOTE K – INVENTORIES

Inventories consist of the following:

10

Table of Contents

NOTE L – EARNINGS PER SHARE

A reconciliation of the number of common shares used in the calculation of basic and diluted earnings per share (EPS) is presented below:

The effect of 450,672 and 240,116 securities were not included in the calculation of weighted average shares outstanding for the three months ended March 30, 2013 and March 31, 2012, respectively, as they were antidilutive.

NOTE M – ACCRUED LIABILITIES

Accrued liabilities consist of the following:

Activity related to accrued warranties was as follows:

11

Table of Contents

NOTE N – INCOME TAXES

Total deferred income tax assets for the Company’s foreign subsidiaries relating to net operating loss carryforwards were $14.8 million at March 30, 2013 and December 31, 2012, respectively. The related valuation allowance was $11.8 million at March 30, 2013 and December 31, 2012, respectively. The Company’s effective tax rate decreased to 18.4% for the three months ended March 30, 2013 from 22.1% for the three months ended March 31, 2012 and included a reduction in the income tax rate of 1.4% and 5.0%, respectively, related to the tax benefit of the exercise of employee stock options. The effective tax rate for the three months ended March 30, 2013 also includes the discrete tax benefit of 7.5% related to the retroactive legislative reinstatement on January 2, 2013 of the Research and Development tax credit for the year ended December 31, 2012, which is required to be included in the period the reinstatement was enacted into law. The Company’s tax rate continues to be lower than the statutory tax rate in the United States primarily as a result of favorable tax rates in foreign jurisdictions. Significant judgment is required in determining the Company’s worldwide provision for income taxes. In the ordinary course of a global business, there are many transactions for which the ultimate tax outcome is uncertain. The Company reviews its tax contingencies on a regular basis and makes appropriate accruals as necessary.

The effective income tax rate for the three months ended March 30, 2013 and 2012 includes a reduction in the statutory corporate tax rates for the Company’s operations in Switzerland. The favorable tax rate ruling requires the Company to maintain a certain level of manufacturing operations in Switzerland. The aggregate dollar effect of this favorable tax rate was approximately $0.4 million, or $0.03 per share, in the three month period ended March 30, 2013, and $0.3 million, or $0.02 per share, in the three month period ended March 31, 2012.

In 2005, the Company opened a regional headquarters and began to manufacture certain of its products in Singapore. In the third quarter of 2006, the Company received confirmation of a tax holiday for its operations from the Singapore Economic Development Board for a period of four years commencing January 1, 2006 and an additional six year extension at favorable tax rates subject to certain terms and conditions, including employment, spending, and capital investment. The Company and the Singapore Economic Development Board mutually agreed to end the program as of December 31, 2011, as the Company has expanded its operations in other locations within Asia to meet market demand. The aggregate dollar effect of this favorable tax rate was approximately $0.1 million, or $0.01 per share, during the three month period ended March 31, 2012.

NOTE O – FAIR VALUE OF FINANCIAL INSTRUMENTS

The Company’s financial instruments include cash and cash equivalents, short-term investments, accounts receivable, customer deposits and accounts payable and accrued liabilities. The carrying amounts of such financial instruments approximate their fair value due to the short-term nature of these instruments.

NOTE P – SEGMENT REPORTING

The Company has three reportable segments based upon geographic regions: Americas, Europe/Africa and Asia/Pacific. The Company does not allocate corporate expenses to the Europe/Africa or Asia/Pacific regions. These corporate expenses are included in the Americas region. The Company does not incur Research and Development expenses in its Asia/Pacific region.

12

Table of Contents

The Company develops, manufactures, markets, supports and sells Computer-Aided Design (“CAD”)-based quality assurance products integrated with CAD-based inspection and statistical process control software in each of these regions. These activities represent approximately 99% of consolidated sales. The Company evaluates performance and allocates resources based upon profitable growth and assets deployed.

The following table presents information about the Company’s reportable segments:

The geographical sales information presented above represents sales to customers located in each respective region, whereas the long-lived assets information represents assets held in the respective regions. There were no customers that individually accounted for 10% or more of total revenue in each of the periods presented above.

13

Table of Contents

NOTE Q – COMMITMENTS AND CONTINGENCIES

Leases – The Company is a party to leases arising in the normal course of business that expire on or before 2019. Total obligations under these leases are approximately $6.2 million for 2013.

Purchase Commitments – The Company enters into purchase commitments for products and services in the ordinary course of business. These purchases generally cover production requirements for 60 to 90 days. As of March 30, 2013, the Company does not have any long-term commitments for purchases.

Patent Matters – On July 11, 2008, Metris USA, Inc. and its affiliates, Metris N.V., Metris IPR N.V. and 3-D Scanners Ltd., filed a complaint against the Company for patent infringement in the U.S. District Court for the District of Massachusetts (the “Massachusetts Court”) concerning U.S. Patent Nos. 6,611,617 and 7,313,264 (hereinafter, the “patents-in-suit”). Following an acquisition by Nikon Corporation in late 2009, Metris USA, Inc. subsequently changed its name to Nikon Metrology, Inc., Metris N.V. changed its name to Nikon Metrology NV, and Metris IPR N.V. was dissolved and merged into Nikon Metrology NV. We refer to each of Nikon Metrology, Inc., Nikon Metrology NV, and 3-D Scanners Ltd. as “Plaintiffs” or “Nikon”.

The Company responded to the complaint with counterclaims alleging that the patents-in-suit, which are generally directed to laser scanning devices, are invalid, non-infringed, and unenforceable due to fraud during prosecution of the patents in the U.S. Patent and Trademark Office. On August 31, 2009, the Massachusetts Court granted the Company’s motion to add counterclaims and defenses for violation of federal and state antitrust and unfair competition laws based on the alleged knowing assertion of invalid and fraudulent patents. The Company also filed an amended counterclaim to add the Plaintiff’s parent company, Nikon Corporation, as a counterclaim defendant.

On July 14, 2010, the Company filed a motion for summary judgment of non-infringement of both patents-in-suit. On August 31, 2010, Nikon filed a motion for summary judgment against the Company’s counterclaims for antitrust violations and unfair trade practices.

On September 19, 2011, the Massachusetts Court ruled that the Company did not infringe U.S. Patent No. 6,611,617. The Massachusetts Court also granted Nikon’s motion for summary judgment on the Company’s counterclaims for anti-trust violations and unfair trade practices. The Massachusetts Court denied the Company’s motion for summary judgment of non-infringement of U.S. Patent No. 7,313,264. The effect of the ruling was to reduce or eliminate the Company’s exposure with respect to claims associated with U.S. Patent No. 6,611,617, while the patent dispute with respect to U.S. Patent No. 7,313,264 continued.

On August 10, 2012, following a two-week jury trial on the remaining claims related to U.S. Patent No. 7,313,264, the jury determined the asserted patent claims were invalid, and on August 13, 2012, the Massachusetts Court entered judgment for the Company. The Massachusetts Court sustained this verdict on January 23, 2013, denying all post-trial motions except the Company’s motion for attorneys’ fees. On February 21, 2013, the Court stayed the Company’s motion for attorneys’ fees pending resolution of any appeals to the U.S. Federal Circuit.

On March 20, 2013, the Massachusetts Court entered Final Judgment in the Company’s favor, awarding the Company its costs. On April 10, 2013, the Company filed a notice of appeal to the U.S. Federal Circuit with respect to the Massachusetts Court’s failure to address the inequitable conduct by the inventor and related patent misuse and anti-trust issues. The Company believes it is entitled to relief for all of its attorneys’ fees and costs incurred in the litigation, although the amount and eventual recovery are uncertain at this time.

Other than the litigation mentioned above, the Company is not involved in any legal proceedings other than routine litigation arising in the normal course of business, none of which the Company believes will have a material adverse effect on the Company’s business, financial condition or results of operations.

14

Table of Contents

NOTE R – LINE OF CREDIT

On July 11, 2006, the Company entered into a loan agreement providing for an available line of credit of $30.0 million, which was most recently amended on March 15, 2012. Loans under the Amended and Restated Loan Agreement, as amended, bear interest at the rate of LIBOR plus a fixed percentage between 1.50% and 2.00% and require the Company to maintain a minimum cash balance and tangible net worth measured at the end of each of the Company’s fiscal quarters. As of March 30, 2013, the Company was in compliance with all of the covenants under the Amended and Restated Loan Agreement, as amended. The term of the Amended and Restated Loan Agreement, as amended, expires on March 31, 2015. The Company has not drawn on this line of credit.

15

Table of Contents

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following information should be read in conjunction with the Consolidated Financial Statements, including the notes thereto, included elsewhere in this Form 10-Q and Management’s Discussion and Analysis of Financial Condition and Results of Operations included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2012.

FARO Technologies, Inc. (“FARO”, the “Company”, “us”, “we”, or “our”) has made “forward-looking statements” in this report (within the meaning of the Private Securities Litigation Reform Act of 1995). Statements that are not historical facts or that describe our plans, beliefs, goals, intentions, objectives, projections, expectations, assumptions, strategies, or future events are forward-looking statements. In addition, words such as “may,” “will,” “believe,” “plan,” “should,” “could,” “seek,” “expect,” “anticipate,” “intend,” “estimate,” “project” and similar words, or discussions of our strategy or other intentions, identify forward-looking statements. Specifically, this Quarterly Report on Form 10-Q contains, among others, forward-looking statements regarding:

Forward-looking statements are not guarantees of future performance and are subject to a number of known and unknown risks, uncertainties, and other factors that could cause actual results to differ materially from those expressed or implied by such forward-looking statements. Consequently, undue reliance should not be placed on these forward-looking statements. The Company does not intend to update any forward-looking statements, whether as a result of new information, future events, or otherwise, unless otherwise required by law. Important factors that could cause actual results to differ materially from those contemplated in such forward-looking statements include, among others, the following:

16

Table of Contents

17

Table of Contents

other risks and uncertainties discussed in Part I, Item 1A. Risk Factors in the Company’s Annual Report on Form 10-K for the year ended December 31, 2012. Moreover, new risks and uncertainties emerge from time to time, and we undertake no obligation to update publicly or review the risks and uncertainties included in this quarterly report on Form 10-Q.

Overview

The Company designs, develops, manufactures, markets and supports portable, software driven, 3-D measurement and imaging systems that are used in a broad range of manufacturing, industrial, building construction and forensic applications. The Company’s FaroArm®, FARO Laser ScanArm® and FARO Gage articulated measuring devices, the FARO Laser Tracker Vantage™, the FARO Focus^3D, the FARO 3D Imager AMP and their companion CAM2® software, provide for Computer-Aided Design, or CAD, -based inspection and/or factory-level statistical process control, and high-density surveying. Together, these products integrate the measurement, quality inspection, and reverse engineering functions with CAD software to improve productivity, enhance product quality and decrease rework and scrap in the manufacturing process. The Company uses the acronym “CAM2” for this process, which stands for computer-aided measurement.

As of March 30, 2013, the Company’s products have been purchased by approximately 15,000 customers worldwide, ranging from small machine shops to such large manufacturing and industrial companies as Audi, Bell Helicopter, Bombadier, Boeing, British Aerospace, Caterpillar, Daimler AG, Ford, General Electric, General Motors, Honda, Johnson Controls, Komatsu America International, Lockheed Martin, NASA, Nissan, Northrup Grumman, Siemens and Volkswagen, among many others.

The Company derives revenues primarily from the sale of its FaroArm, FARO Laser ScanArm, FARO Gage, FARO Laser Tracker ION and FARO Focus^3D measurement equipment, and their related multi-faceted software. Revenue related to these products is generally recognized upon shipment. In addition, the Company sells one and three-year extended warranties and training and technology consulting services relating to its products. The Company recognizes the revenue from extended warranties on a straight-line basis. The Company also receives royalties from licensing agreements for its historical medical technology and recognizes the revenue from these royalties as licensees use the technology.

The Company manufactures its FaroArm, FARO Gage, FARO 3D Imager AMP, and FARO Laser Tracker ION products in the Company’s manufacturing facilities located in Florida and Pennsylvania for customer orders from the Americas, in its manufacturing facility located in Switzerland for customer orders from the Europe/Africa region, and in its manufacturing facility located in Singapore for customer orders from the Asia/Pacific region. The Company manufactures its FARO Focus^3D product in its facility located in Stuttgart, Germany. The Company expects all its existing plants to have the production capacity necessary to support its volume requirements through 2013.

The Company operates in international markets throughout the world. It maintains sales offices in the United States, Brazil, Mexico, France, Germany, Great Britain, Italy, Netherlands, Poland, Spain, China, India, Japan, Malaysia, Singapore, Thailand, and Vietnam. The Company manages and reports its global sales in three regions: the Americas, Europe/Africa and Asia/Pacific.

In the first quarter of 2013, 39.9% of the Company’s sales were in the Americas compared to 38.4% in the first three months of 2012, 33.5% were in the Europe/Africa region compared to 35.3% in the first quarter of 2012, and 26.6% were in the Asia/Pacific region compared to 26.3% in the same prior year period. In the first quarter of 2013, new order bookings increased $2.5 million, or 4.0%, to $64.6 million from $62.1 million in the prior year period. New orders in the first quarter of 2013 increased $5.5 million, or 25.2%, in the Americas to $27.3 million from $21.8 million in the prior year period. New orders in the first quarter of 2013 decreased $1.8 million, or 7.9%, to $21.0 million in Europe/Africa from $22.8 million in the first quarter of 2012. In Asia/Pacific, new orders in the first three months of 2013 decreased $1.2 million, or 6.9%, to $16.3 million from $17.5 million in the first quarter of 2012.

18

Table of Contents

The Company accounts for wholly owned foreign subsidiaries in the currency of the respective foreign jurisdiction; therefore, fluctuations in exchange rates may have an impact on inter-company accounts reflected in the Company’s consolidated financial statements. The Company is aware of the availability of off-balance sheet financial instruments to hedge exposure to foreign currency exchange rates, including cross-currency swaps, forward contracts and foreign currency options (see Foreign Exchange Exposure below). However, it does not regularly use such instruments, and none were utilized in 2012 or the three months ended March 30, 2013.

The Company was profitable in each quarter in the years ended December 31, 2012, 2011, and 2010. The Company incurred a net loss in the year ended December 31, 2009, primarily as a result of a decrease in product sales. The Company attributes the decrease in product sales principally to the decline of the global economy. Prior to 2009, the Company had a history of sales and earnings growth and 26 consecutive profitable quarters through December 31, 2008. Its historical sales and earnings growth were the result of a number of factors, including: continuing market demand for and acceptance of the Company’s products, increased sales activity in part through additional sales staff worldwide, new products and product enhancements such as the FARO Edge Arm and FARO Focus^3D, and the effect of acquisitions. However, the Company’s historical financial performance is not indicative of its future financial performance.

Results of Operations

Three Months Ended March 30, 2013 Compared to the Three Months Ended March 31, 2012

Sales increased by $0.2 million, or 0.3%, to $65.4 million in the three months ended March 30, 2013 from $65.2 million for the three months ended March 31, 2012. This increase resulted primarily from an increase in service revenue. Product sales decreased by $1.9 million, or 3.6%, to $52.5 million for the three months ended March 30, 2013 from $54.4 million for the first quarter of 2012 primarily as a result of lower average selling prices across all regions in response to more competitive pricing pressure on the Company’s products. Service revenue increased by $2.1 million, or 19.3%, to $12.9 million for the three months ended March 30, 2013 from $10.8 million in the same period during the prior year, primarily due to an increase in warranty revenue.

Sales in the Americas region increased $1.0 million, or 4.0%, to $26.1 million for the three months ended March 30, 2013 from $25.1 million in the three months ended March 31, 2012. Product sales in the Americas region decreased by $0.2 million, or 1.0%, to $20.4 million for the three months ended March 30, 2013 from $20.6 million in the first quarter of the prior year. Service revenue in the Americas region increased by $1.2 million, or 28.0%, to $5.7 million for the three months ended March 30, 2013 from $4.5 million in the same period during the prior year, primarily due to an increase in warranty revenue.

Sales in the Europe/Africa region decreased $1.1 million, or 4.8%, to $21.9 million for the three months ended March 30, 2013 from $23.0 million in the three months ended March 31, 2012. Product sales in the Europe/Africa region decreased by $1.8 million, or 9.6%, to $17.0 million for the three months ended March 30, 2013 from $18.8 million in the first quarter of the prior year. Service revenue in the Europe/Africa region increased $0.7 million, or 15.8%, to $4.9 million for the three months ended March 30, 2013 from $4.2 million in the same period during the prior year.

Sales in the Asia/Pacific region increased $0.3 million, or 1.8%, to $17.4 million for the three months ended March 30, 2013 from $17.1 million in the three months ended March 31, 2012. Product sales in the Asia/Pacific region increased by $0.1 million, or 0.5%, to $15.1 million for the three months ended March 30, 2013 from $15.0 million in the first quarter of the prior year. Service revenue in the Asia/Pacific region increased by $0.2 million, or 7.7%, to $2.3 million for the three months ended March 30, 2013 from $2.1 million in the same period during the prior year.

Gross profit decreased by $0.4 million, or 1.0%, to $36.8 million for the three months ended March 30, 2013 from $37.2 million for the three months ended March 31, 2012. Gross margin decreased to 56.3% for

19

Table of Contents

the three months ended March 30, 2013 from 57.0% for the three months ended March 31, 2012. The decrease in gross margin is primarily due to a decrease in gross margin from product sales to 59.3% in the three months ended March 30, 2013 from 62.3% for the three months ended March 31, 2012. Gross margin from product sales decreased primarily as a result of lower average selling prices and an increase in the sales mix of Laser Scanner product sold to distributors. Gross margin from service revenues increased to 44.1% in the three months ended March 30, 2013 from 30.0% in the same period in the prior year due to increased warranty revenue.

Selling expenses increased by $0.7 million, or 3.8%, to $16.7 million for the three months ended March 30, 2013 from $16.0 million for three months ended March 31, 2012. This increase was primarily due to an increase in travel related costs of $0.6 million and an increase in compensation of $0.4 million partially related to additional headcount, offset by a decrease in trade show expenses of $0.3 million.

Worldwide sales and marketing headcount increased by 60, or 17.8%, to 398 at March 30, 2013 from 338 at March 31, 2012. Regionally, the Company’s sales and marketing headcount increased by 26, or 27.7%, to 120 from 94 for the Americas; decreased by 19, or 16.8%, in Europe/Africa to 132 from 113; and increased by 15, or 11.5%, in Asia/Pacific to 146 from 131.

As a percentage of sales, selling expenses increased to 25.5% of sales in the three months ended March 30, 2013 from 24.6% of sales in the three months ended March 31, 2012. Regionally, selling expenses were 21.6% of sales in the Americas for the quarter ended March 30, 2013 compared to 22.4% of sales in the first quarter of 2012; 30.5% of sales for Europe/Africa in the first quarter of 2013 compared to 27.8% of sales from the same period in the prior year; and 24.9% of sales for Asia/Pacific compared to 23.4% of sales from the same period in the prior year.

General and administrative expenses increased by $0.9 million to $7.5 million in the three months ended March 30, 2013 from $6.6 million in the prior year quarter, as a result of an increase in compensation of $0.7 million and bad debt expense of $0.2 million, offset by lower professional and legal fees of $0.2 million.

Depreciation and amortization expenses increased slightly to $1.8 million for the three months ended March 30, 2013 from $1.7 million for the three months ended March 31, 2012.

Research and development expenses increased to $5.1 million for the three months ended March 30, 2013 from $4.4 million for the three months ended March 31, 2012, primarily as a result of an increase in compensation and subcontractor expense of $0.7 million. Research and development expenses as a percentage of sales increased to 7.8% for the three months ended March 30, 2013 from 6.8% for the three months ended March 31, 2012.

Other (income) expense, net increased to an expense of $0.1 million for the three months ended March 30, 2013 compared to income of $0.2 million in the three months ended March 31, 2012, and consisted primarily of net foreign currency transaction gains resulting from changes in foreign exchange rates on the value of the current intercompany account balances of the Company’s subsidiaries denominated in different currencies and other expenses.

Income tax expense decreased by $0.9 million to $1.0 million for the three months ended March 30, 2013 from $1.9 million for the three months ended March 31, 2012. This decrease was primarily due to a decrease in pretax income. The Company’s effective tax rate decreased to 18.4% for the three months ended March 30, 2013 from 22.1% in the prior year period and included a reduction in the income tax rates of 1.4% and 5.0%, respectively, related to the tax benefit of the exercise of employee stock options. The effective tax rate for the three months ended March 30, 2013 also includes the discrete tax benefit of 7.5% related to the retroactive legislative reinstatement on January 2, 2013 of the Research and Development tax credit for the year ended December 31, 2012, which is required to be included in the period the reinstatement was enacted into law. The Company’s tax rate continues to be lower than the statutory tax rate in the United States, primarily as a result of favorable tax rates in foreign jurisdictions. However, the Company’s tax rate could be impacted positively or negatively by geographic changes in the manufacturing or sales of its products and the resulting effect on taxable income in each jurisdiction.

Net income decreased by $2.1 million to $4.6 million for the three months ended March 30, 2013 from $6.7 million for the three months ended March 31, 2012 as a result of the factors described above.

20

Table of Contents

Liquidity and Capital Resources

Cash and cash equivalents increased by $11.4 million to $104.6 million at March 30, 2013 from $93.2 million at December 31, 2012. The increase was primarily attributable to net income and non-cash expenses of $8.9 million, proceeds from stock option exercises of $3.0 million and a decrease in working capital of $2.2 million, offset by purchases of equipment and intangible assets of $0.7 million, and the effect of exchange rate changes on cash of $2.0 million.

On July 11, 2006, the Company entered into a loan agreement providing for an available line of credit of $30.0 million, which was most recently amended effective March 15, 2012. Loans under the Amended and Restated Loan Agreement, as amended, bear interest at the rate of LIBOR plus a fixed percentage between 1.50% and 2.00% and require the Company to maintain a minimum cash balance and tangible net worth measured at the end of each of the Company’s fiscal quarters. As of March 30, 2013, the Company was in compliance with all of the covenants under the Amended and Restated Loan Agreement, as amended. The term of the Amended and Restated Loan Agreement, as amended, expires on March 31, 2015. The Company has not drawn on this line of credit.

The Company believes that its working capital, anticipated cash flow from operations, and credit facility will be sufficient to fund its long-term liquidity requirements for the foreseeable future.

The Company has no off balance sheet arrangements.

Critical Accounting Policies

The preparation of the Company’s consolidated financial statements requires the Company’s management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues, and expenses, as well as disclosure of contingent assets and liabilities. The Company bases its estimates on historical experience, along with various other factors believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Some of these judgments can be subjective and complex and, consequently, actual results may differ from these estimates under different assumptions or conditions. While for any given estimate or assumption made by the Company’s management there may be other estimates or assumptions that are reasonable, the Company believes that, given the current facts and circumstances, it is unlikely that applying any such other reasonable estimate or assumption would materially impact the Company’s financial statements.

In response to the SEC’s financial reporting release FR-60, “Cautionary Advice Regarding Disclosure About Critical Accounting Policies,” the Company has selected its critical accounting policies for purposes of explaining the methodology used in its calculations, in addition to any inherent uncertainties pertaining to the possible effects on its financial condition. The critical policies discussed below are the Company’s processes of recognizing revenue, the reserve for excess and obsolete inventory, income taxes, the reserve for warranties and goodwill impairment. These policies affect current assets and operating results and are therefore critical in assessing the Company’s financial and operating status. These policies involve certain assumptions that, if incorrect, could have an adverse impact on the Company’s operations and financial position.

Revenue Recognition

Revenue related to the Company’s measurement equipment and related software is generally recognized upon shipment, as the Company considers the earnings process complete as of the shipping date. Revenue from sales of software only is recognized when no further significant production, modification or customization of the software is required and where persuasive evidence of a sales agreement exists, delivery

21

Table of Contents

has occurred, and the sales price is fixed or determinable and deemed collectible. Revenues resulting from sales of comprehensive support, training and technology consulting services are recognized as such services are performed. Extended maintenance plan revenues are recognized on a straight-line basis over the life of the plan. The Company warrants its products against defects in design, materials and workmanship for one year. A provision for estimated future costs relating to warranty expense is recorded when products are shipped. Costs relating to extended maintenance plans are recognized as incurred. Revenue from the licensing agreements for the use of the Company’s historical technology for medical applications is recognized when the technology is used by the licensees.

Reserve for Excess and Obsolete Inventory

Since the value of inventory that will ultimately be realized cannot be known with exact certainty, the Company relies upon both past sales history and future sales forecasts to provide a basis for the determination of the reserve. Inventory is considered obsolete if the Company has withdrawn those products from the market or had no sales of the product for the past 12 months and has no sales forecasted for the next 12 months. Inventory is considered excess if the quantity on hand exceeds 12 months of expected remaining usage. The resulting obsolete and excess parts are then reviewed to determine if a substitute usage or a future need exists. Items without an identified current or future usage are reserved in an amount equal to 100% of the FIFO cost of such inventory. The Company’s products are subject to changes in technologies that may make certain of its products or their components obsolete or less competitive, which may increase its historical provisions to the reserve.

Income Taxes

The Company reviews its deferred tax assets on a regular basis to evaluate their recoverability based upon expected future reversals of deferred tax liabilities, projections of future taxable income over a two-year period, and tax planning strategies that it might employ to utilize such assets, including net operating loss carryforwards. Based on the positive and negative evidence of recoverability, the Company establishes a valuation allowance against the net deferred assets of a taxing jurisdiction in which it operates unless it is “more likely than not” that it will recover such assets through the above means. In the future, the Company’s evaluation of the need for the valuation allowance will be significantly influenced by its ability to achieve profitability and its ability to predict and achieve future projections of taxable income.

Significant judgment is required in determining the Company’s worldwide provision for income taxes. In the ordinary course of operating a global business, there are many transactions for which the ultimate tax outcome is uncertain. The Company establishes provisions for income taxes when, despite the belief that tax positions are fully supportable, there remain certain positions that do not meet the minimum probability threshold as described by ASC 740, which is a tax position that is more likely than not to be sustained upon examination by the applicable taxing authority. In the ordinary course of business, the Company and its subsidiaries are examined by various federal, state, and foreign tax authorities. The Company regularly assesses the potential outcomes of these examinations and any future examinations for the current or prior years in determining the adequacy of its provision for income taxes. The Company assesses the likelihood and amount of potential adjustments and adjusts the income tax provision, the current tax liability and deferred taxes in the period in which the facts that gave rise to a revision become known.

Reserve for Warranties

The Company establishes at the time of sale a liability for the one year warranty included with the initial purchase price of equipment, based upon an estimate of the repair expenses likely to be incurred for the warranty period. The warranty period is measured in installation-months for each major product group. The warranty reserve is reflected in accrued liabilities in the accompanying consolidated balance sheets. The warranty expense is estimated by applying the actual total repair expenses for each product group in the prior

22

Table of Contents

period and determining a rate of repair expense per installation-month. This repair rate is multiplied by the number of installation-months of warranty for each product group to determine the provision for warranty expenses for the period. The Company evaluates its exposure to warranty costs at the end of each period using the estimated expense per installation-month for each major product group, the number of units remaining under warranty and the remaining number of months each unit will be under warranty. The Company has a history of new product introductions and enhancements to existing products, which may result in unforeseen issues that increase its warranty costs. While such expenses have historically been within expectations, the Company cannot guarantee this will continue in the future.

Goodwill Impairment

Goodwill represents the excess cost of a business acquisition over the fair value of the net assets acquired. Indefinite-life identifiable intangible assets and goodwill are not amortized but are tested for impairment. The Company performs an annual review in the fourth quarter of each year, or more frequently if indicators of potential impairment exist, to determine if the carrying value of the recorded goodwill is impaired. If an asset is impaired, the difference between the value of the asset reflected on the financial statements and its current fair value is recognized as an expense in the period in which the impairment occurs.

The Company first performs a qualitative assessment to determine whether it is necessary to perform the two-step goodwill impairment test. If the Company believes, as a result of its qualitative assessment, that it is not more likely than not that the fair value of a reporting unit is less than its carrying amount, then the first and second steps of the goodwill impairment test are unnecessary.

If necessary as a result of the qualitative assessment, the goodwill impairment test is applied using a two-step approach. In performing the first step, the Company calculates the fair values of the reporting units using discounted cash flows (“DCF”) of each reporting unit. If the carrying amount of the reporting unit exceeds the fair value, the second step is performed to measure the amount of the impairment loss, if any. In the second step, the implied fair value of the goodwill is estimated as the fair value of the reporting unit as calculated in the first step, less the fair values of the net tangible and intangible assets of the reporting unit other than goodwill. If the carrying amount of goodwill exceeds its implied fair value, an impairment loss is recognized in an amount equal to that excess, not to exceed the carrying amount of the goodwill. Management has concluded there was no goodwill impairment in the three months ended March 30, 2013 or the year ended December 31, 2012.

23

Table of Contents

Item 3. Quantitative and Qualitative Disclosures about Market Risk

Foreign Exchange Exposure

The Company conducts a significant portion of its business outside the United States. As of March 30, 2013, 60.1% of its revenues were invoiced, and a significant portion of its operating expenses paid, in foreign currencies. Fluctuations in exchange rates between the U.S. dollar and such foreign currencies may have a material adverse effect on the Company’s business, results of operations and financial condition, and could specifically result in foreign exchange gains and losses. The impact of future exchange rate fluctuations on the results of the Company’s operations cannot be accurately predicted. To the extent that the percentage of its non-U.S. dollar revenues derived from international sales increases (or decreases) in the future, the Company’s exposure to risks associated with fluctuations in foreign exchange rates may increase (or decrease). The Company is aware of the availability of off-balance sheet financial instruments to hedge exposure to foreign currency exchange rates, including cross-currency swaps, forward contracts and foreign currency options. However, it does not regularly use such instruments, and none were utilized in the first quarter of 2013.

Item 4. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

The Company maintains disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act) that are designed to ensure that information required to be disclosed by the Company in the reports it files or submits under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to the Company’s management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

As of the end of the period covered by this report, the Company’s management carried out an evaluation, under the supervision and with the participation of its Chief Executive Officer and its Chief Financial Officer, of the effectiveness of the Company’s disclosure controls and procedures. Based upon that evaluation, the Company’s Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and procedures, as defined by Rule 13a-15(e) under the Exchange Act, were effective as of March 30, 2013.

Changes in Internal Control Over Financial Reporting

There were no changes in the Company’s internal control over financial reporting (as such term is defined in Rule 13a-15(f) under the Exchange Act) during the quarter ended March 30, 2013 that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

24

Table of Contents

PART II. OTHER INFORMATION

Item 1. Legal Proceedings

Patent Matters – On July 11, 2008, Metris USA, Inc. and its affiliates, Metris N.V., Metris IPR N.V. and 3-D Scanners Ltd., filed a complaint against the Company for patent infringement in the U.S. District Court for the District of Massachusetts (the “Massachusetts Court”) concerning U.S. Patent Nos. 6,611,617 and 7,313,264 (hereinafter, the “patents-in-suit”). Following an acquisition by Nikon Corporation in late 2009, Metris USA, Inc. subsequently changed its name to Nikon Metrology, Inc., Metris N.V. changed its name to Nikon Metrology NV, and Metris IPR N.V. was dissolved and merged into Nikon Metrology NV. We refer to each of Nikon Metrology, Inc., Nikon Metrology NV, and 3-D Scanners Ltd. as “Plaintiffs” or “Nikon”.

The Company responded to the complaint with counterclaims alleging that the patents-in-suit, which are generally directed to laser scanning devices, are invalid, non-infringed, and unenforceable due to fraud during prosecution of the patents in the U.S. Patent and Trademark Office. On August 31, 2009, the Massachusetts Court granted the Company’s motion to add counterclaims and defenses for violation of federal and state antitrust and unfair competition laws based on the alleged knowing assertion of invalid and fraudulent patents. The Company also filed an amended counterclaim to add the Plaintiff’s parent company, Nikon Corporation, as a counterclaim defendant.

On July 14, 2010, the Company filed a motion for summary judgment of non-infringement of both patents-in-suit. On August 31, 2010, Nikon filed a motion for summary judgment against the Company’s counterclaims for antitrust violations and unfair trade practices.

On September 19, 2011, the Massachusetts Court ruled that the Company did not infringe U.S. Patent No. 6,611,617. The Massachusetts Court also granted Nikon’s motion for summary judgment on the Company’s counterclaims for anti-trust violations and unfair trade practices. The Massachusetts Court denied the Company’s motion for summary judgment of non-infringement of U.S. Patent No. 7,313,264. The effect of the ruling was to reduce or eliminate the Company’s exposure with respect to claims associated with U.S. Patent No. 6,611,617, while the patent dispute with respect to U.S. Patent No. 7,313,264 continued.

On August 10, 2012, following a two-week jury trial on the remaining claims related to U.S. Patent No. 7,313,264, the jury determined the asserted patent claims were invalid, and on August 13, 2012, the Massachusetts Court entered judgment for the Company. The Massachusetts Court sustained this verdict on January 23, 2013, denying all post-trial motions except the Company’s motion for attorneys’ fees. On February 21, 2013, the Court stayed the Company’s motion for attorneys’ fees pending resolution of any appeals to the U.S. Federal Circuit.

On March 20, 2013, the Massachusetts Court entered Final Judgment in the Company’s favor, awarding the Company its costs. On April 10, 2013, the Company filed a notice of appeal to the U.S. Federal Circuit with respect to the Massachusetts Court’s failure to address the inequitable conduct by the inventor and related patent misuse and anti-trust issues. The Company believes it is entitled to relief for all of its attorneys’ fees and costs incurred in the litigation, although the amount and eventual recovery are uncertain at this time.

Other than the litigation mentioned above, the Company is not involved in any legal proceedings other than routine litigation arising in the normal course of business, none of which the Company believes will have a material adverse effect on the Company’s business, financial condition or results of operations.

25

Table of Contents

Item 1A. Risk Factors

In addition to the other information set forth in this Form 10-Q, you should carefully consider the factors discussed under “Risk Factors” in the Company’s Form 10-K for the year ended December 31, 2012, as filed with the SEC. These risks could materially and adversely affect the Company’s business, financial condition, and results of operations. The risks described in the Company’s Form 10-K for the year ended December 31, 2012 are not the only risks it faces. The Company’s operations could also be affected by additional factors that are not presently known to the Company or by factors that it currently considers immaterial to its business.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

Purchases of Equity Securities by the Issuer Under the Share Repurchase Program

On November 24, 2008, the Company’s Board of Directors approved a $30 million share repurchase program. Acquisitions for the share repurchase program will be made from time to time at prevailing prices as permitted by securities laws and other legal requirements, and subject to market conditions and other factors. The share repurchase program may be discontinued at any time. There is no restriction date or other restriction governing the period over which the Company can repurchase shares under the program. The Company made no stock repurchases during the three month period ended March 30, 2013 under this program.

Other Purchases of Equity Securities by the Issuer

During the first quarter of fiscal 2013, the Company indirectly repurchased shares outside of the share repurchase program through net share settlement to satisfy minimum statutory tax withholding requirements upon vesting of shares of restricted stock held by employees. The following table summarizes this repurchase activity during the three months ended March 30, 2013:

26

Table of Contents

Item 6. Exhibits

27

Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

28

Table of Contents

EXHIBIT INDEX

29