Annual Statements Open main menu

FARO TECHNOLOGIES INC - Quarter Report: 2018 March (Form 10-Q)

Table of Contents

 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, DC 20549
 
 
FORM 10-Q
 
 
x
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended March 31, 2018
OR
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from                      to                     
Commission File Number: 0-23081
  
 
FARO TECHNOLOGIES, INC.
(Exact Name of Registrant as Specified in Its Charter)
  
 
Florida
59-3157093
(State or other Jurisdiction of Incorporation or Organization)
(I.R.S. Employer Identification No.)
 
 
250 Technology Park, Lake Mary, Florida
32746
(Address of Principal Executive Offices)
(Zip Code)
(407) 333-9911
(Registrant’s Telephone Number, including Area Code)
   
 
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    YES  x    NO  ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    YES  x    NO  ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” “and emerging growth company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer
x
 
Accelerated filer
o
 
 
 
 
Non-accelerated filer
o
(Do not check if a smaller reporting company)
Smaller reporting company
o
Emerging growth company
o
 
 
 
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    YES  ¨    NO  x
There were 16,960,961 shares of the registrant’s common stock outstanding as of April 23, 2018.
 


Table of Contents

FARO TECHNOLOGIES, INC.
Quarterly Report on Form 10-Q
Quarter Ended March 31, 2018
INDEX
 
 
 
PAGE
PART I.
 
 
 
 
Item 1.
 
 
 
 
a)
 
 
 
b)
 
 
 
c)
 
 
 
d)
 
 
 
e)
 
 
 
Item 2.
 
 
 
Item 3.
 
 
 
Item 4.
 
 
 
PART II.
 
 
 
 
Item 1.
 
 
 
Item 1A.
 
 
 
Item 2.
 
 
 
Item 6.
 
 


2

Table of Contents

PART I. FINANCIAL INFORMATION
Item 1. Financial Statements
FARO TECHNOLOGIES, INC. AND SUBSIDIARIES
CONDENSED CONSOLIDATED BALANCE SHEETS
(in thousands, except share data)
March 31,
2018
(unaudited)
 
December 31,
2017
ASSETS
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
138,826

 
$
140,960

Short-term investments
10,957

 
10,997

Accounts receivable, net
71,631

 
72,105

Inventories, net
58,376

 
53,786

Prepaid expenses and other current assets
19,119

 
16,311

Total current assets
298,909

 
294,159

Property and equipment:
 
 
 
Machinery and equipment
69,355

 
66,514

Furniture and fixtures
6,853

 
6,945

Leasehold improvements
20,230

 
19,872

Property and equipment at cost
96,438

 
93,331

Less: accumulated depreciation and amortization
(64,907
)
 
(61,452
)
Property and equipment, net
31,531

 
31,879

Goodwill
54,511

 
52,750

Intangible assets, net
25,399

 
22,540

Service and sales demonstration inventory, net
41,703

 
39,614

Deferred income tax assets, net
15,738

 
15,606

Other long-term assets
2,861

 
2,030

Total assets
$
470,652

 
$
458,578

LIABILITIES AND SHAREHOLDERS’ EQUITY
 
 
 
Current liabilities:
 
 
 
Accounts payable
$
11,145

 
$
11,569

Accrued liabilities
24,367

 
27,362

Income taxes payable
2,104

 
4,676

Current portion of unearned service revenues
30,976

 
29,674

Customer deposits
2,456

 
2,604

Total current liabilities
71,048

 
75,885

Unearned service revenues - less current portion
12,531

 
11,815

Deferred income tax liabilities
700

 
695

Income taxes payable - less current portion
15,952

 
15,952

Other long-term liabilities
2,092

 
2,165

Total liabilities
102,323

 
106,512

Commitments and contingencies - See Note 14

 

Shareholders’ equity:
 
 
 
Common stock - par value $.001, 50,000,000 shares authorized; 18,416,020 and 18,277,142 issued, respectively; 16,955,679 and 16,796,884 outstanding, respectively
18

 
18

Additional paid-in capital
231,209

 
223,055

Retained earnings
171,444

 
168,624

Accumulated other comprehensive loss
(2,608
)
 
(7,822
)
Common stock in treasury, at cost; 1,460,341 and 1,480,258 shares, respectively
(31,734
)
 
(31,809
)
Total shareholders’ equity
368,329

 
352,066

Total liabilities and shareholders’ equity
$
470,652

 
$
458,578

The accompanying notes are an integral part of these condensed consolidated financial statements.

3

Table of Contents

FARO TECHNOLOGIES, INC. AND SUBSIDIARIES
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
(UNAUDITED)
 
 
Three Months Ended
(in thousands, except share and per share data)
March 31, 2018
 
March 31, 2017
Sales
 
 
 
Product
$
70,581

 
$
62,380

Service
22,253

 
19,182

Total sales
92,834

 
81,562

Cost of Sales
 
 
 
Product
26,884

 
27,058

Service
12,164

 
10,755

Total cost of sales (exclusive of depreciation and amortization, shown separately below)
39,048

 
37,813

Gross Profit
53,786

 
43,749

Operating Expenses
 
 
 
Selling and marketing
28,271

 
22,872

General and administrative
11,073

 
10,699

Depreciation and amortization
4,343

 
3,718

Research and development
9,406

 
8,466

Total operating expenses
53,093

 
45,755

Income (loss) from operations
693

 
(2,006
)
Other expense (income)
 
 
 
Interest income
(73
)
 
(82
)
Other expense, net
184

 
8

Income (loss) before income tax expense (benefit)
582

 
(1,932
)
Income tax expense (benefit)
127

 
(471
)
Net income (loss)
$
455

 
$
(1,461
)
Net income (loss) per share - Basic
$
0.03

 
$
(0.09
)
Net income (loss) per share - Diluted
$
0.03

 
$
(0.09
)
Weighted average shares - Basic
16,837,754

 
16,684,164

Weighted average shares - Diluted
17,142,770

 
16,684,164

The accompanying notes are an integral part of these condensed consolidated financial statements.

4

Table of Contents

FARO TECHNOLOGIES, INC. AND SUBSIDIARIES
CONDENSED CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
(UNAUDITED)
 
 
Three Months Ended
(in thousands)
March 31, 2018
 
March 31, 2017
Net income (loss)
$
455

 
$
(1,461
)
Currency translation adjustments, net of income tax
5,214

 
4,159

Comprehensive income
$
5,669

 
$
2,698

The accompanying notes are an integral part of these condensed consolidated financial statements.

5

Table of Contents

FARO TECHNOLOGIES, INC. AND SUBSIDIARIES
CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
(UNAUDITED)
 
 
Three Months Ended
(in thousands)
March 31, 2018
 
March 31, 2017
Cash flows from:
 
 
 
Operating activities:
 
 
 
Net income (loss)
$
455

 
$
(1,461
)
Adjustments to reconcile net income (loss) to net cash used in operating activities:
 
 
 
Depreciation and amortization
4,343

 
3,718

Stock-based compensation
1,553

 
1,417

Provision for bad debts
24

 
89

Loss on disposal of assets
127

 
77

Provision for excess and obsolete inventory
312

 
567

Deferred income tax (benefit) expense
(128
)
 
6

Change in operating assets and liabilities:
 
 
 
Decrease (increase) in:
 
 
 
Accounts receivable
1,808

 
1,722

Inventories
(5,208
)
 
(2,480
)
Prepaid expenses and other current assets
(936
)
 
(1,181
)
(Decrease) increase in:
 
 
 
Accounts payable and accrued liabilities
(4,846
)
 
(2,442
)
Income taxes payable
(2,571
)
 
(618
)
Customer deposits
(213
)
 
(123
)
Unearned service revenues
1,231

 
430

Net cash used in operating activities
(4,049
)
 
(279
)
Investing activities:
 
 
 
Purchases of property and equipment
(2,243
)
 
(1,745
)
Payments for intangible assets
(650
)
 
(332
)
Acquisition of businesses
(3,966
)
 

Net cash used in investing activities
(6,859
)
 
(2,077
)
Financing activities:
 
 
 
Payments on capital leases
(46
)
 
(2
)
Proceeds from issuance of stock related to stock option exercises
6,785

 
268

Net cash provided by financing activities
6,739

 
266

Effect of exchange rate changes on cash and cash equivalents
2,035

 
1,779

Decrease in cash and cash equivalents
(2,134
)
 
(311
)
Cash and cash equivalents, beginning of period
140,960

 
106,169

Cash and cash equivalents, end of period
$
138,826

 
$
105,858

The accompanying notes are an integral part of these condensed consolidated financial statements.

6

Table of Contents

FARO TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(UNAUDITED)
(in thousands, except share and per share data, or as otherwise noted)
NOTE 1 – DESCRIPTION OF BUSINESS
FARO Technologies, Inc. and its subsidiaries (collectively “FARO,” the “Company,” “us,” “we” or “our”) is a global technology company that designs, develops, manufactures, markets and supports software driven, three-dimensional (“3D”) measurement, imaging and realization systems. This technology permits high-precision 3D measurement, imaging and comparison of parts and complex structures within production and quality assurance processes. Our devices are used for inspection of components and assemblies, rapid prototyping, reverse engineering, documenting large volume or structures in 3D, surveying and construction, as well as for investigation and reconstruction of accident sites or crime scenes. We sell the majority of our products through a direct sales force across a broad number of customers in a range of manufacturing, industrial, architecture, surveying, building information modeling, construction, public safety forensics, cultural heritage and other applications. Our FaroArm®, FARO ScanArm®, FARO Gage®, FARO Laser TrackerTM, FARO Cobalt Array Imager, FARO Laser Projector, and their companion CAM2®, BuildIT, and RayTracerTM software solutions, provide for Computer-Aided Design (“CAD”) based inspection, factory-level statistical process control, high-density surveying and laser-guided assembly and production. Together, these products integrate the measurement, quality inspection, and reverse engineering functions with CAD and 3D software to improve productivity, enhance product quality, and decrease rework and scrap in the manufacturing process, mainly supporting applications in our Factory Metrology vertical. Our FARO Focus and FARO Scanner Freestyle3DX laser scanners, and their companion FARO SCENE, FARO PointSense, and FARO Zone public safety forensics software offerings, are utilized for a wide variety of 3D modeling, documentation and high-density surveying applications in our Construction Building Information Modeling (“Construction BIM” and formerly known as “Construction BIM-CIM”) and Public Safety Forensics verticals. Our FARO ScanArm®, FARO Cobalt Array Imager, FARO Scanner Freestyle3DX laser scanners and their companion SCENE software also enable a fully digital workflow used to capture real world geometry for the purpose of empowering design, enabling innovation, and speeding up the design cycle, supporting our Product Design vertical. FARO Visual InspectTM enables large, complex 3D CAD data to be transferred to a tablet device and then used for mobile visualization and comparison to real world conditions, facilitating in-process inspection, assembly, guidance and positioning for applications in our Factory Metrology and Construction BIM verticals. Our line of galvanometer-based scan heads and laser scan controllers are used in a variety of laser applications and are integrated into larger components and systems.
We report our segment information in accordance with the provisions of Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) Topic 280, Segment Reporting (“FASB ASC Topic 280”). We evaluate business performance based upon several metrics, using segment profit as the primary financial measure. In the first quarter of 2018, we combined our historical Factory Metrology and 3D Machine Vision verticals under a single reporting segment, 3D Factory (formerly known as “Factory Metrology”), due to the linkage between the two historical verticals related to the type or class of customers served, the nature of the products and services provided, and the nature of the production processes. The 3D Machine Vision vertical was historically reported within the former Other reporting segment. There has been no change in our total consolidated financial condition or results of operations previously reported as a result of the change in our reportable segments. The amounts related to our reporting segment information for the three months ended March 31, 2017 have been restated throughout this Quarterly Report on Form 10-Q to reflect the change in reporting segments. Each of our reporting segments continue to employ consistent accounting policies. As a result of this assessment, we now report our activities in the following three reportable segments:
The 3D Factory reporting segment includes our Factory Metrology and 3D Machine Vision verticals and provides both standardized and customized solutions for manual, automated and 3D measurement and inspection in an industrial or manufacturing environment. Applications include alignment, part inspection, dimensional analysis, first article inspection, incoming and in-process inspection, machine calibration, non-contact inspection, robot calibration, tool building and set-up, and assembly guidance.

7

Table of Contents

The Construction BIM reporting segment contains solely our Construction BIM vertical and provides solutions for as-built data capturing and 3D visualization in building information modeling applications, allowing our customers in the architecture, engineering and construction markets to quickly and accurately extract two-dimensional (“2D”) and 3D measurement points. Applications include as-built documentation, construction monitoring, surveying, asset and facility management, and heritage preservation.
The Emerging Verticals reporting segment (formerly known as "Other") includes our Product Design and Public Safety Forensics verticals. Our Product Design vertical provides advanced 3D solutions to assist in the engineering or design of a movable object, enabling a full digital workflow for applications that include reverse engineering and virtual simulation. Our Public Safety Forensics vertical provides solutions to public safety officials and professionals to capture environmental or situational scenes in 2D and 3D for crime, crash and fire scene investigations and environmental safety evaluations.
All operating segments that do not meet the criteria to be reportable segments are aggregated in the Emerging Verticals reporting segment and have been combined based on the aggregation criteria and quantitative thresholds in accordance with the provisions of FASB ASC Topic 280. See Note 13 – Segment Reporting for further information.
NOTE 2 – PRINCIPLES OF CONSOLIDATION
Our condensed consolidated financial statements include the accounts of FARO Technologies, Inc. and its subsidiaries, all of which are wholly-owned. All intercompany transactions and balances have been eliminated. The financial statements of our foreign subsidiaries are translated into U.S. dollars using exchange rates in effect at period-end for assets and liabilities and average exchange rates during each reporting period for results of operations. Adjustments resulting from financial statement translations are reflected as a separate component of accumulated other comprehensive loss. Foreign currency transaction gains and losses are included in net income (loss).
NOTE 3 – BASIS OF PRESENTATION
The accompanying unaudited condensed consolidated financial statements and notes thereto have been prepared in accordance with accounting principles generally accepted in the United States (“U.S. GAAP”) for interim financial information and with the instructions of Form 10-Q and Article 10 of Regulation S-X. Accordingly, they do not include all of the information and footnotes required by U.S. GAAP for complete financial statements. These condensed consolidated financial statements include all normal recurring accruals and adjustments considered necessary by management for a fair presentation in conformity with U.S. GAAP. Preparing financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ materially from those estimates. The condensed consolidated results of operations for the three months ended March 31, 2018 are not necessarily indicative of results that may be expected for the year ending December 31, 2018 or any future interim period.
The information included in this Quarterly Report on Form 10-Q, including the interim condensed consolidated financial statements and the accompanying notes, should be read in conjunction with the audited consolidated financial statements and related notes included in our Annual Report on Form 10-K for the fiscal year ended December 31, 2017. The accompanying December 31, 2017 condensed consolidated balance sheet has been derived from those audited consolidated financial statements.
As described in Note 1 – Description of Business, in the first quarter of 2018, we changed our reporting segment structure. Amounts related to our reporting segment information for the three months ended March 31, 2017 have been restated throughout this Quarterly Report on Form 10-Q to reflect the change in reporting segments.
NOTE 4 – IMPACT OF RECENTLY ISSUED ACCOUNTING PRONOUNCEMENTS
Impact of Recently Adopted Accounting Standards -
In January 2017, the FASB issued Accounting Standards Update (“ASU”) No. 2017-01, Business Combinations (Topic 805): Clarifying the Definition of a Business (“ASU 2017-01”) in order to clarify the definition of a business and provide additional guidance to assist entities with evaluating whether transactions should be accounted for as acquisitions (or disposals) of assets or businesses. ASC Topic 805 recognizes three elements of a business: inputs, processes, and outputs. While an integrated set of assets and activities (collectively referred to as a “set”) that is a business usually has outputs, outputs are not required to be present. Additionally, all the inputs and processes that a seller uses in operating a set are not required if market participants can acquire the set and continue to produce outputs. ASU 2017-01 provides a screen to determine when a set is not a business. The screen requires that when substantially all of the fair value of the gross assets acquired (or disposed of) is concentrated in a single identifiable asset or a group of similar identifiable assets, the set is not a business. If the screen is not met, the new guidance (1) requires that to be considered a business, a set must include, at a minimum, an input and a substantive process that together significantly contribute to the ability to create output and (2) removes the evaluation of whether a market participant could replace missing elements. The new guidance provides a framework to assist entities in evaluating whether both an input and a substantive process are present. This framework includes two sets of criteria to consider that depend on whether a set has outputs. Although outputs are not required for a set to be a business, outputs generally are a

8

Table of Contents

key element of a business. ASU 2017-01 provides more stringent criteria for sets without outputs and more narrowly defines the term output. ASU 2017-01 became effective for us on January 1, 2018 and was applied prospectively. Our adoption of the new guidance did not have a material impact on our consolidated financial statements.
In October 2016, the FASB issued ASU No. 2016-16, Income Taxes (Topic 740): Intra-Entity Transfers of Assets Other than Inventory (“ASU 2016-16”), which removes the prohibition in ASC Topic 740 against the immediate recognition of the current and deferred income tax effects of intra-entity transfers of assets other than inventory. This ASU requires the tax effects of intercompany transactions, other than sales of inventory, to be recognized when the transfer occurs, instead of deferred until the transferred asset is sold to a third party or otherwise recovered through use of the asset. The new guidance must be applied on a modified retrospective basis through a cumulative-effect adjustment directly to retained earnings as of the beginning of the period of adoption. ASU 2016-16 became effective for us on January 1, 2018 and was applied on a modified retrospective basis. Our adoption of the new guidance did not have a material impact on our consolidated financial statements.

In August 2016, the FASB issued ASU No. 2016-15, Statement of Cash Flows (Topic 230): Classification of Certain Cash Receipts and Cash Payments (“ASU 2016-15”), which clarifies how companies present and classify certain cash receipts and cash payments in the statement of cash flows. ASU 2016-15 became effective for us on January 1, 2018 and was applied on a modified retrospective basis. Our adoption of the new guidance did not have a material impact on our consolidated financial statements.

In May 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers: (Topic 606) (“ASU 2014-09”), amending its accounting guidance related to revenue recognition. Under this ASU and subsequently issued amendments, revenue is recognized to depict the transfer of goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. Additional disclosures are required to provide the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts, including significant judgments and changes in judgments and assets recognized from costs incurred to obtain or fulfill a contract. The following represents the impact of our adoption by significant revenue stream:

• Measurement equipment and related software: Under the prior accounting guidance, sales of measurement, imaging and realization equipment and related software sales were generally recognized upon shipment, as we considered the earnings process complete as of the shipping date. The related software sold with our measurement, imaging and realization equipment functions together with such equipment to deliver the tangible product’s essential functionality. Customers frequently purchase extended warranties when purchasing measurement equipment and related software. Under the new guidance, we allocate the contract price to performance obligations based on our best estimate of the standalone selling price, utilizing data from the sale of our applicable products and services to customers separately in similar circumstances, with the exception of software licenses. We use the residual method for allocating the contract price to performance obligations relating to software licenses. Our adoption of the new guidance did not result in material changes to our accounting for revenue related to our measurement, imaging and realization equipment and related software.

• Extended warranties: Under the prior accounting guidance, extended warranty sales were recognized on a straight-line basis over the term of the warranty. Extended warranty sales include contract periods that extend between one month and three years. The unearned service revenues reported in current and noncurrent liabilities on our condensed consolidated balance sheets appropriately reflect the remaining performance obligations related to these contracts. Our adoption of the new guidance did not result in material changes to our accounting for revenue related to extended warranties.

• Software: Under the prior accounting guidance, software only sales were recognized when no further significant production, modification or customization of the software was required and when the following criteria were met: persuasive evidence of a sales agreement existed, delivery had occurred, and the sales price was fixed or determinable and deemed collectible. These software arrangements generally include short-term maintenance that is considered post-contract support. Maintenance renewals, when sold, were recognized on a straight-line basis over the term of the maintenance agreement. Our adoption of the new guidance did not result in material changes to our accounting for revenue related to software only sales and maintenance renewals.

The unearned service revenue liabilities reported on our condensed consolidated balance sheets reflect the contract liabilities to satisfy the remaining performance obligations for extended warranties and software maintenance. The current portion of unearned service revenues on our condensed consolidated balance sheets is what we expect to recognize to revenue within twelve months after the applicable balance sheet date relating to extended warranty and software maintenance contract liabilities. The unearned service revenues - less current portion on our condensed consolidated balance sheets is what we expect to recognize to revenue extending beyond twelve months after the applicable balance sheet date relating to extended warranty and software maintenance contract liabilities. Customer deposits on our condensed consolidated balance sheets represent

9

Table of Contents

customer prepayments on contracts for performance obligations that we must satisfy in the future to recognize the related contract revenue. During the three months ended March 31, 2018, we recognized $9.0 million of service revenue that was deferred on our consolidated balance sheet as of December 31, 2017.

Under the prior accounting guidance, we recognized sales commission expense as incurred. Under the new guidance, we must capitalize commission expense and amortize such costs ratably over the term of the contract. In accordance with the modified retrospective method of adoption, we recorded a net increase to opening retained earnings as of January 1, 2018 of $2.4 million and recognized an associated $2.4 million deferred cost asset due to the cumulative impact of adopting the new guidance. As of March 31, 2018, the deferred cost asset related to deferred commissions was approximately $2.5 million. For classification purposes, $1.8 million and $0.7 million are comprised within the Prepaid expenses and other current assets and Other long-term assets, respectively, on our condensed consolidated balance sheet. The impact of adopting the new guidance was not material to the consolidated operating results for the three months ended March 31, 2018.

We have elected to account for shipping and handling as activities to fulfill the promise to transfer the good. As such, shipping and handling fees billed to customers in a sales transaction are recorded in Sales and shipping and handling costs incurred are recorded in Cost of sales. Additionally, we have elected to exclude from Sales any value add, sales and other taxes that we collect concurrent with revenue-producing activities. These accounting policy elections are consistent with the manner in which we have historically recorded shipping and handling fees and taxes.

The nature of certain of our contracts gives rise to variable consideration, which may be constrained, primarily related to an allowance for sales returns. In accordance with the adoption of the new guidance, we are required to estimate the contract asset related to sales returns and record a corresponding adjustment to Cost of Sales. Historically, our allowance for sales returns has not been material and was less than $0.1 million as of March 31, 2018. As such, our adoption of the new guidance did not result in material changes to our accounting for variable consideration related to sales returns, and the corresponding contract asset related to such returns.

The following tables present our revenues by Sales type as presented in our condensed consolidated statements of operations disaggregated by the timing of transfer of goods or services (in thousands, unaudited):

 
 
For the Three Months Ended March 31,
 
 
2018
 
2017
Product sales
 
 
 
 
Product transferred to customers at a point in time
 
$
70,581

 
$
62,380

Product transferred to customers over time
 

 

 
 
$
70,581

 
$
62,380


 
 
For the Three Months Ended March 31,
 
 
2018
 
2017
Service sales
 
 
 
 
Service transferred to customers at a point in time
 
$
9,452

 
$
8,642

Service transferred to customers over time
 
12,801

 
10,540

 
 
$
22,253

 
$
19,182



10

Table of Contents

The following table presents our revenues disaggregated by geography, based on the billing addresses of our customers (in thousands, unaudited):

 
 
For the Three Months Ended March 31,
 
 
2018
 
2017
Net sales to external customers
 
 
 
 
United States
 
$
37,302

 
$
31,770

EMEA (1)
 
29,680

 
24,960

APAC (1)
 
22,589

 
21,260

Other Americas (1)
 
3,263

 
3,572

 
 
$
92,834

 
$
81,562

(1) Regions represent Europe, the Middle East, and Africa (EMEA); Asia-Pacific (APAC); and Canada and Latin America (Other Americas)

Impact of Recently Issued Accounting Standards -
In January 2017, the FASB issued ASU No. 2017-04, Intangible - Goodwill and Other (Topic 350): Simplifying the Test for Goodwill Impairment (“ASU 2017-04”), which is intended to simplify the subsequent measurement of goodwill by eliminating Step 2 from the goodwill impairment test. Under the current guidance, performance of Step 2 requires us to calculate the implied fair value of goodwill by following procedures that would be required to determine the fair value of assets acquired and liabilities assumed in a business combination. Under the new guidance, we will perform our goodwill impairment test by comparing the fair value of a reporting unit with its carrying amount. An impairment charge will be recognized for the amount by which the carrying amount exceeds the reporting unit’s fair value up to the amount of the goodwill allocated to the reporting unit. The new guidance also eliminates the requirements for any reporting unit with a zero or negative carrying amount to perform Step 2 of the goodwill impairment test if it fails the qualitative assessment. As a result, all reporting units will be subject to the same impairment assessment. We will still have the option to perform the qualitative assessment for a reporting unit to determine if the quantitative impairment test is necessary. ASU 2017-04 becomes effective for annual or any interim goodwill impairment tests in fiscal years beginning after December 15, 2019, with early adoption permitted for annual or any interim goodwill impairment tests after January 1, 2017. The amendments in this ASU will be applied on a prospective basis. Disclosure of the nature and reason for the change in accounting principle is required upon transition. This disclosure is required in the first annual period and in the interim period within the first annual period when we initially adopt the amendments in this ASU. We plan to adopt this guidance for our fiscal year ending December 31, 2020. We do not expect that the adoption of this guidance will have a material impact on our consolidated financial statements.

In February 2016, the FASB issued ASU 2016-02, Leases (Topic 842) (“ASU 2016-02”), which is intended to increase transparency and comparability among organizations by recognizing lease assets and lease liabilities on the balance sheet and disclosing key information about leasing arrangements to enable users of financial statements to assess the amount, timing, and uncertainty of cash flows arising from leases. ASU 2016-02 must be applied on a modified retrospective basis and is effective for fiscal years beginning after December 15, 2018, and interim periods within those years, with early adoption permitted. We plan to adopt ASU 2016-02 in the first quarter of 2019. Although we are in the process of evaluating the impact of adoption of this ASU on our consolidated financial statements, we currently believe the most significant changes will be related to the recognition of new right-of-use assets and lease liabilities on our balance sheet for operating leases.
NOTE 5 – STOCK-BASED COMPENSATION
Stock-based compensation expense reflects the fair value of stock-based awards measured at the grant date and is recognized over the requisite service period.
We have two compensation plans that provide for the granting of stock options and other share-based awards to key employees and non-employee members of the Board of Directors (the “Board”). The 2009 Equity Incentive Plan (“2009 Plan”) and the 2014 Equity Incentive Plan (“2014 Plan”) provide for granting options, restricted stock, restricted stock units or stock appreciation rights to employees and non-employee directors. In May 2014, our shareholders approved the 2014 Plan, authorizing us to grant awards for up to 1,974,543 shares of common stock, as well as any shares underlying awards outstanding under the 2004 Equity Incentive Plan (the “2004 Plan”) and 2009 Plan as of the effective date of the 2014 Plan that thereafter terminate or expire unexercised or are canceled, forfeited or lapse for any reason. No awards were outstanding under the 2004 Plan as of March 31, 2018, and we will not make any further grants under the 2004 Plan or the 2009 Plan.

11

Table of Contents

Upon election to the Board, each non-employee director receives an initial equity grant of shares of restricted common stock with a value equal to $100,000, calculated using the closing share price on the date of the non-employee director’s election to the Board. The initial restricted stock grant vests on the third anniversary of the grant date, subject to the non-employee director’s continued membership on the Board. Annually, the non-employee directors are granted restricted shares with a value equal to $100,000 on the first business day following the annual meeting of shareholders, calculated using the closing price of our common stock on that day. In addition, the Lead Director is annually granted restricted shares with a value equal to $40,000 on the first business day following the annual meeting of shareholders, calculated using the closing price of our common stock on that day. The shares of restricted stock granted annually to our non-employee directors and our Lead Director vest on the day prior to the following year’s annual meeting date, subject to the non-employee director’s continued membership on the Board. We record compensation cost associated with our restricted stock grants on a straight-line basis over the vesting term.
Annually, upon approval by our Compensation Committee, we grant stock options and restricted stock units to certain employees. We also grant stock options and restricted stock units to certain new employees throughout the year. The fair value of these stock-based awards is determined by using (a) the current market price of our common stock on the grant date in the case of restricted stock units or (b) the Black-Scholes option valuation model in the case of stock options.
Our annual grants in March 2018 and March 2017 consisted of stock options and restricted stock units that are subject to only time-based vesting. The number of stock options and/or restricted stock units granted was based on the employee’s individual objectives, performance against operational metrics assigned to the employee and overall contribution to FARO. The stock options vest in three equal annual installments beginning one year after the grant date. The restricted stock unit awards vest in full on the three-year anniversary of the grant date. The fair value of these stock-based awards is determined by using (a) the Black-Scholes option valuation model in the case of stock options or (b) the current market price of our common stock on the grant date in the case of restricted stock units.
In 2015, we granted performance-based stock options and restricted stock units to certain executives. These awards vested in three annual installments beginning one year after the grant date if the applicable performance measures or strategic objectives were achieved. The related stock-based compensation expense was recognized over the requisite service period, taking into account the probability that we would satisfy the performance measures or strategic objectives. In addition to certain strategic objectives, the performance-based stock options and restricted stock units granted in 2015 were earned and vested based upon (1) our achievement of specified revenue and earnings per share targets, and (2) our total shareholder return (“TSR”) relative to the TSR attained by companies within our defined peer group.
Due to the TSR presence in certain performance-based grants, the fair value of these awards was determined using the Monte Carlo Simulation valuation model. We expensed these market condition awards over the three-year vesting period regardless of the value the award recipients ultimately received. In March 2018, our Compensation Committee determined that 7,743 performance-based stock options and 266 restricted stock units were earned for the 2017 performance period and 17,160 stock options and 640 restricted stock units were unearned, as the required metrics were not achieved. As of March 31, 2018, all performance-based stock options and restricted stock units granted in 2015 were either vested or were forfeited because they were not earned.
The Black-Scholes option valuation model incorporates assumptions as to stock price volatility, the expected life of options or awards, a risk-free interest rate and dividend yield. The weighted-average grant-date fair value of the stock options that were granted during the three months ended March 31, 2018 and March 31, 2017 and valued using the Black-Scholes option valuation model was $23.43 and $14.51 per option, respectively. For stock options granted during the three months ended March 31, 2018 and March 31, 2017 valued using the Black-Scholes option valuation model, we used the following assumptions:
 
Three Months Ended
 
March 31,
2018
 
March 31,
2017
Risk-free interest rate
2.65
%
 
2.02
%
Expected dividend yield
%
 
%
Expected term of option
4 years

 
5 years

Expected volatility
45.0
%
 
45.2
%
Weighted-average expected volatility
45.0
%
 
45.2
%
Historical information was the primary basis for the selection of the expected dividend yield, expected volatility and the expected lives of the options. The risk-free interest rate was based on the yields of U.S. zero coupon issues and U.S. Treasury issues, with a term equal to the expected life of the option being valued.

12

Table of Contents

A summary of stock option activity and weighted-average exercise prices during the three months ended March 31, 2018 follows:
 
Options
 
Weighted-
Average
Exercise Price
 
Weighted-Average
Remaining
Contractual Term
(Years)
 
Aggregate Intrinsic
Value as of
March 31, 2018
Outstanding at January 1, 2018
1,156,763

 
$
45.93

 
 
 
 
Granted
174,439

 
61.30

 
 
 
 
Forfeited or expired
(32,005
)
 
40.79

 
 
 
 
Exercised
(156,765
)
 
43.28

 
 
 
 
Unearned performance-based options
(17,160
)
 
59.97

 
 
 
 
Outstanding at March 31, 2018
1,125,272

 
$
48.27

 
4.6
 
$
12,223

Options exercisable at March 31, 2018
942,658

 
$
42.36

 
2.6
 
$
6,129

The total intrinsic value of stock options exercised for the three months ended March 31, 2018 and March 31, 2017, was $2.7 million and $0.1 million, respectively. The fair value of stock options vested during the three months ended March 31, 2018 and March 31, 2017 was $3.1 million and $2.9 million, respectively.
The following table summarizes the restricted stock and restricted stock unit activity and weighted average grant-date fair values for the three months ended March 31, 2018:
 
Shares
 
Weighted-Average
Grant Date
Fair Value
Non-vested at January 1, 2018
257,492

 
$
34.75

Granted
86,178

 
61.30

Forfeited
(7,307
)
 
36.28

Vested
(3,104
)
 
36.19

Unearned performance-based awards
(640
)
 
51.15

Non-vested at March 31, 2018
332,619

 
$
41.59

We recorded total stock-based compensation expense of $1.6 million and $1.4 million for the three months ended March 31, 2018 and March 31, 2017, respectively.
As of March 31, 2018, there was $16.8 million of total unrecognized stock-based compensation expense related to non-vested stock-based compensation arrangements. The expense is expected to be recognized over a weighted average period of 2.4 years.
NOTE 6 – SHORT TERM INVESTMENTS
Short-term investments at March 31, 2018 consisted of U.S Treasury Bills totaling $11.0 million that mature through July 5, 2018.  Short-term investments at December 31, 2017 consisted of U.S. Treasury Bills totaling $11.0 million that matured on January 11, 2018. The interest rate on the U.S. Treasury Bills held on March 31, 2018 is 1.45% and was less than one percent for the U.S. Treasury Bills held as of December 31, 2017. The investments are classified as held-to-maturity and recorded at cost plus accrued interest, which approximates fair value. The fair value of the U.S. Treasury Bills at March 31, 2018 and December 31, 2017 were classed as Level 1, as they are traded with sufficient frequency and volume to enable us to obtain pricing information on an ongoing basis. For further discussion of fair value, refer to Note 12 – Fair Value of Financial Instruments.
NOTE 7 – ACCOUNTS RECEIVABLE
Accounts receivable consist of the following:
 
As of
March 31, 2018
 
As of
December 31, 2017
Accounts receivable
$
73,642

 
$
74,062

Allowance for doubtful accounts
(2,011
)
 
(1,957
)
Total
$
71,631

 
$
72,105


13

Table of Contents

NOTE 8 – INVENTORIES
Inventories are stated at the lower of cost or net realizable value using the first-in first-out (FIFO) method. We have three principal categories of inventory: 1) manufactured product to be sold; 2) sales demonstration inventory - completed product used to support our sales force and demonstrations; and 3) service inventory - completed product and parts used to support our service department. Shipping and handling costs associated with third party sales transactions are classified as a component of cost of sales in our condensed consolidated statements of operations.
Sales demonstration inventory is held by our sales representatives for up to three years, at which time it would be refurbished and transferred to finished goods as used equipment, stated at the lower of cost or net realizable value. Management expects these refurbished units to remain in finished goods inventory and to be sold within 12 months at prices that may produce reduced gross margins.
Service inventory is used to provide a temporary replacement product to a customer covered by a premium warranty when the customer’s unit requires service or repair and as training equipment. Service inventory is available for sale; however, management does not expect service inventory to be sold within 12 months and, as such, classifies this inventory as a long-term asset. Service inventory that we utilize for training or repairs and which we deem as no longer available for sale is transferred to fixed assets at the lower of cost or net realizable value and depreciated over the remaining life, typically three years.
Inventories consist of the following: 
 
As of
March 31, 2018
 
As of
December 31, 2017
Raw materials
$
37,406

 
$
36,328

Finished goods
20,970

 
17,458

Inventories, net
$
58,376

 
$
53,786

 
 
 
 
Service and sales demonstration inventory, net
$
41,703

 
$
39,614


NOTE 9 – EARNINGS (LOSS) PER SHARE
Basic earnings (loss) per share is computed by dividing net income or (loss) by the weighted average number of shares outstanding. Diluted earnings per share is computed by also considering the impact of potential common stock on both net income and the weighted average number of shares outstanding. Our potential common stock consists of employee stock options, restricted stock units and performance-based awards. Our potential common stock is included in the diluted earnings per share calculation, when adding such potential common stock would not be anti-dilutive. Performance-based awards are included in the computation of diluted earnings per share only to the extent that the underlying performance conditions (and any applicable market condition) (i) are satisfied as of the end of the reporting period or (ii) would be considered satisfied if the end of the reporting period were the end of the related contingency period and the result would be dilutive under the treasury stock method. When we report a net loss, which we did for the three months ended March 31, 2017, the calculation of diluted net loss per share excludes our potential common stock, as the effect would be anti-dilutive.
For the three months ended March 31, 2018 and March 31, 2017, there were approximately 655,944 shares and 1,108,139 shares, respectively, issuable upon the exercise of options and the contingent vesting of performance-based awards that were excluded from the dilutive calculations, as they were anti-dilutive.
A reconciliation of the number of common shares used in the calculation of basic and diluted earnings per share (“EPS”) is presented below:
 
Three Months Ended
 
March 31, 2018
 
March 31, 2017
 
Shares
 
Per-Share
Amount
 
Shares
 
Per-Share
Amount
Basic earnings (loss) per share
16,837,754

 
$
0.03

 
16,684,164

 
$
(0.09
)
Effect of dilutive securities
305,016

 

 

 

Diluted earnings (loss) per share
17,142,770

 
$
0.03

 
16,684,164

 
$
(0.09
)


NOTE 10 – ACCRUED LIABILITIES
Accrued liabilities consist of the following:
 
As of
March 31, 2018
 
As of
December 31, 2017
Accrued compensation and benefits
$
13,706

 
$
16,144

Accrued warranties
2,475

 
2,628

Professional and legal fees
1,839

 
1,541

Taxes other than income
2,778

 
3,787

Other accrued liabilities
3,569

 
3,262

 
$
24,367

 
$
27,362

Activity related to accrued warranties was as follows:
 
Three Months Ended
 
March 31, 2018
 
March 31, 2017
Balance, beginning of period
$
2,628

 
$
2,594

Provision for warranty expense
914

 
874

Fulfillment of warranty obligations
(1,067
)
 
(1,114
)
Balance, end of period
$
2,475

 
$
2,354

NOTE 11 – INCOME TAXES
For the three months ended March 31, 2018, we recorded income tax expense of $0.1 million compared with an income tax benefit of $0.5 million for the three months ended March 31, 2017. Our effective tax rate was 21.8% for the three months ended March 31, 2018 compared with a 24.4% benefit in the prior year period. The change in our income tax expense (benefit) was primarily due to pretax income during the three months ended March 31, 2018 compared to a pretax loss during the three months ended March 31, 2017.  

On December 22, 2017, the United States enacted the U.S. Tax Cuts and Jobs Act (the “Tax Cuts Act”), resulting in significant modifications to existing tax law. We are following the guidance in SEC Staff Accounting Bulletin 118 (“SAB 118”), which provides additional clarification regarding the application of ASC Topic 740 in situations where a company does not have the necessary information available, prepared, or analyzed in reasonable detail to complete the accounting for certain income tax effects of the Tax Cuts Act for the reporting period in which the Tax Cuts Act was enacted. SAB 118 provides for a measurement period beginning in the reporting period that includes the Tax Cuts Act's December 2017 enactment date and ending when we have obtained, prepared, and analyzed the information needed in order to complete the accounting for such income tax effects, but in no circumstances will the measurement period extend beyond one year from the enactment date.

Under the Tax Cuts Act, changes include lowering the statutory corporate tax rate from 35% to 21%, eliminating certain deductions, imposing a mandatory tax on accumulated earnings in foreign subsidiaries, introducing new tax regimes, and changing how foreign earnings are subject to United States taxation. The statutory corporate tax rate reduction is effective for tax years beginning on or after January 1, 2018. Based on our best estimate, we have calculated the impact of the Tax Cuts Act in our current tax provision in accordance with our understanding of the Tax Cuts Act and available guidance. The portion of the provisional amount that related to the transition tax on the mandatory deemed repatriation of foreign earnings was $17.4 million based on our best estimate and guidance available as of the date of this filing, which was recorded in the fourth quarter of 2017. The provisional amount related to the transition tax on the mandatory deemed repatriation of foreign earnings has not changed as of March 31, 2018 when compared to December 31, 2017. Additional work is necessary to perform a more detailed analysis of historical foreign earnings. Upon gathering all necessary data, interpreting any additional guidance from tax authorities, and completing the analysis, our provisional amount will be adjusted in the measurement period allowable in accordance with SAB 118. Our provisional amount relating to the transition tax may materially differ upon completing the analysis compared to the amount accrued as of March 31, 2018. We expect our analysis to be completed when our 2017 United States tax return is filed in the fourth quarter of 2018.


14

Table of Contents

Additionally, the Tax Cuts Act included a new provision designed to impose a tax on global intangible low-taxed income (“GILTI”) of foreign subsidiaries which allows the possibility of using foreign tax credits to offset the tax liability, subject to some limitations. For the three months ended March 31, 2018, our income tax expense included an estimate of the current GILTI impact on our tax provision, which we currently estimate would result in a tax liability of approximately $0.7 million for the year ended December 31, 2018. Based on our current forecast of taxable income for the United States and foreign tax jurisdictions, the estimated $0.7 million GILTI tax liability would be fully offset by the utilization of foreign tax credits and have an immaterial impact on our income tax expense for the year ended December 31, 2018. Our amount relating to GILTI may materially differ if the geographical mix of taxable earnings or total taxable earnings change compared to the assumptions used in our forecast.
NOTE 12 – FAIR VALUE OF FINANCIAL INSTRUMENTS
Our financial instruments include cash and cash equivalents, short-term investments, accounts receivable, customer deposits, accounts payable and accrued liabilities. The carrying amounts of such financial instruments approximate their fair value due to the short-term nature of these instruments.
Assets and liabilities measured at fair value on a recurring basis are categorized in the tables below based upon the lowest level of significant input to the valuations:
 
As of March 31, 2018
 
Level 1
 
Level 2
 
Level 3
Assets:
 
 
 
 
 
Short-term investments (1)
$
10,957

 
$

 
$

Total
$
10,957

 
$

 
$

Liabilities:
 
 
 
 
 
Contingent consideration (2)
$

 
$

 
$
1,019

Total
$

 
$

 
$
1,019

 

As of December 31, 2017
 
Level 1
 
Level 2
 
Level 3
Assets:
 
 
 
 
 
Short-term investments (1)
$
10,997

 
$

 
$

Total
$
10,997

 
$

 
$

Liabilities:
 
 
 
 
 
Contingent consideration (2)
$

 
$

 
$
412

Total
$

 
$

 
$
412

(1)
Short-term investments in the accompanying consolidated balance sheets are U.S. Treasury Bills. The fair values of these assets are based on Level 1 inputs in the fair value hierarchy.
(2)
Contingent consideration liability represents arrangements to pay the former owners of certain companies we acquired. The remaining undiscounted maximum payment under the arrangements is $1.1 million. We did not pay any amounts as part of these arrangements during the three months ended March 31, 2018. The change in the fair value of the contingent consideration from December 31, 2017 to March 31, 2018 is primarily related to our acquisition of Laser Control Systems Limited on March 9, 2018. See Note 15 – Business Combinations for further information regarding that acquisition.

15

Table of Contents

NOTE 13 – SEGMENT REPORTING
We have three reportable segments; 3D Factory, Construction BIM, and Emerging Verticals. These segments are based upon the vertical markets that we currently serve. Business activities that do not meet the criteria to be reportable segments are aggregated in the Emerging Verticals category.
We develop, manufacture, market, support and sell CAD-based quality assurance products integrated with CAD-based inspection and statistical process control software and three-dimensional documentation systems in each of these reportable segments. These activities represent more than 99% of consolidated sales.
Our Chief Operating Decision Maker (CODM), our Chief Executive Officer, evaluates segment performance and allocates resources based upon profitable growth. We use segment profit to evaluate the performance of our reportable segments. Segment profit is calculated as gross profit, net of selling and marketing expenses, for the reporting segment. Our definition of segment profit may not be comparable to similarly-titled measures reported by other companies.
Our segment structure presented below represents a change from the prior year as further described in Note 1 – Description of Business. The amounts for the three months ended March 31, 2017 have been restated to reflect the change in reporting segments. Each of our segments employs consistent accounting policies.
The following tables present information about our reportable segments, including a reconciliation of total segment profit to Income (Loss) from Operations included in the condensed consolidated statements of operations for the three months ended March 31, 2018 and 2017:
 
 
3D Factory
 
Construction BIM
 
Emerging Verticals
 
Total
Three Months Ended March 31, 2018
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Total sales
 
$
61,358

 
$
22,682

 
$
8,794

 
$
92,834

Segment profit
 
$
18,372

 
$
6,451

 
$
692

 
$
25,515

General and administrative
 
 
 
 
 
 
 
11,073

Depreciation and amortization
 
 
 
 
 
 
 
4,343

Research and development
 
 
 
 
 
 
 
9,406

Income from operations
 
 
 
 
 
 
 
$
693

 
 
3D Factory
 
Construction BIM
 
Emerging Verticals
 
Total
Three Months Ended March 31, 2017
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Total sales
 
$
57,222

 
$
18,941

 
$
5,399

 
$
81,562

Segment profit
 
$
16,669

 
$
4,078

 
$
130

 
$
20,877

General and administrative
 
 
 
 
 
 
 
10,699

Depreciation and amortization
 
 
 
 
 
 
 
3,718

Research and development
 
 
 
 
 
 
 
8,466

Loss from operations
 
 
 
 
 
 
 
$
(2,006
)



16

Table of Contents

NOTE 14 – COMMITMENTS AND CONTINGENCIES
Leases — We lease buildings and equipment in the normal course of business under non-cancellable operating leases that expire in or before 2026. Total obligations under these leases are approximately $6.6 million for 2018.
Purchase Commitments — We enter into purchase commitments for products and services in the ordinary course of business. These purchases generally cover production requirements for 60 to 120 days as well as materials necessary to service customer units through the product lifecycle and for warranty commitments. As of March 31, 2018, we had approximately $53.0 million in purchase commitments that are expected to be delivered within the next 12 months. To ensure adequate component availability in preparation for new product introductions, as of March 31, 2018, we also had $11.1 million in long-term commitments for purchases to be delivered after 12 months.
Legal Proceedings — We are not involved in any legal proceedings other than routine litigation arising in the normal course of business, none of which we believe will have a material adverse effect on our business, financial condition or results of operations.
NOTE 15 – BUSINESS COMBINATIONS

In April 2017, we completed the acquisition of substantially all of the assets of Instrument Associates, LLC d/b/a Nutfield Technology (“Nutfield”), a component technology business located in Hudson, New Hampshire, which specializes in the design and manufacture of advanced galvanometer-based optical scanners, scan heads and laser kits, for a total purchase price of approximately $5.5 million. This acquisition supports our long-term strategy to expand our presence in key markets and improve our existing product lines with innovative technology. The results of the acquired business’ operations as of and after the date of acquisition have been included in our condensed consolidated financial statements for the three months ended March 31, 2018.
The acquisition of Nutfield constitutes a business combination as defined by ASC Topic 805. Accordingly, the assets acquired and liabilities assumed were recorded at their fair values on the date of acquisition.
Following is a summary of our final allocation of the purchase price to the fair values of the assets acquired and liabilities assumed as of the date of the Nutfield acquisition:
 
 
Nutfield
 Accounts receivable
 
$
160

 Inventory
 
539

 Other assets
 
96

 Deferred income tax assets
 
131

 Intangible assets
 
2,329

 Goodwill (1)
 
2,357

 Accounts payable and accrued liabilities
 
(12
)
 Other liabilities
 
(104
)
Total purchase price, net of cash acquired
 
$
5,496


(1) A portion of the goodwill is expected to be tax deductible.

Following are the details of the purchase price allocated to the intangible assets acquired for the Nutfield acquisition noted above:
 
 
Nutfield
 
 
Amount
Weighted Average Life (Years)
 Trade name
 
$
29

1
 Non-competition agreement
 
144

5
 Technology
 
1,970

10
 Customer relationship
 
95

10
 Favorable in-place lease
 
91

12
 Fair value of intangible assets acquired
 
$
2,329

10


17

Table of Contents

The goodwill for the Nutfield acquisition has been allocated to the 3D Factory reporting segment.

On March 9, 2018, we acquired all of the outstanding shares of Laser Control Systems Limited, a laser component technology business located in Bedfordshire, United Kingdom, which specializes in the design and manufacture of advanced digital scan heads and laser software, for a purchase price of $1.7 million. An additional $0.7 million in contingent consideration may be earned by the former owners if certain milestones are met. The preliminary values of the assets acquired were allocated to goodwill and intangible assets in the amounts of $0.4 million and $1.9 million, respectively. The preliminary value of the contingent consideration liability is $0.6 million. The goodwill relates to expected synergies from combining operations and is expected to be allocated to our 3D Factory reporting segment. This acquisition supports our long-term strategy to expand our presence in key markets and improve our existing product lines with innovative technology. The results of the acquired business’ operations as of and after the date of acquisition have been included in our condensed consolidated financial statements as of and for the three months ended March 31, 2018.

On March 16, 2018, we acquired all of the outstanding shares of Photocore AG, a vision-based 3D measurement application and software developer, for a total purchase price of $2.4 million. The preliminary values of the assets acquired were allocated to goodwill and intangible assets in the amounts of $1.0 million and $1.4 million, respectively. The goodwill relates to expected synergies from combining operations and is expected to be allocated to our Construction BIM and Emerging Verticals reporting segments. This acquisition supports our long-term strategy to improve our existing software offerings with innovative technology. The results of the acquired business’ operations as of and after the date of acquisition have been included in our condensed consolidated financial statements as of and for the three months ended March 31, 2018.

Pro forma financial results for Nutfield, Laser Control Systems Limited and Photocore AG have not been presented because the effects of these transactions, individually and in the aggregate, were not material to our consolidated financial results.


18

Table of Contents

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
The following information should be read in conjunction with the Condensed Consolidated Financial Statements, including the notes thereto, included elsewhere in this Form 10-Q and Management’s Discussion and Analysis of Financial Condition and Results of Operations included in our Annual Report on Form 10-K for the year ended December 31, 2017.
FARO Technologies, Inc. (“FARO,” the “Company,” “us,” “we” or “our”) has made “forward-looking statements” in this report (within the meaning of the Private Securities Litigation Reform Act of 1995). Statements that are not historical facts or that describe our plans, beliefs, goals, intentions, objectives, projections, expectations, assumptions, strategies, or future events are forward-looking statements. In addition, words such as “may,” “might,” “would,” “will,” “will be,” “future,” “strategy,” “believe,” “plan,” “should,” “could,” “seek,” “expect,” “anticipate,” “intend,” “estimate,” “goal,” “objective,” “project,” “forecast,” “target” and similar words identify forward-looking statements.
Forward-looking statements are not guarantees of future performance and are subject to a number of known and unknown risks, uncertainties, and other factors that could cause actual results to differ materially from those expressed or implied by such forward-looking statements. Consequently, undue reliance should not be placed on these forward-looking statements. We do not intend to update any forward-looking statements, whether as a result of new information, future events, or otherwise, unless otherwise required by law. Important factors that could cause actual results to differ materially from those contemplated in such forward-looking statements include, among others, the following:
 
an economic downturn in the manufacturing industry or the domestic and international economies in the regions of the world where we operate;
our inability to further penetrate our customer base and target markets;
development by others of new or improved products, processes or technologies that make our products less competitive or obsolete;
our inability to maintain our technological advantage by developing new products and enhancing our existing products;
risks associated with expanding international operations, such as difficulties in staffing and managing foreign operations, increased political and economic instability, compliance with potentially evolving import and export regulations, and the burdens and potential exposure of complying with a wide variety of U.S. and foreign laws and labor practices;
changes in regulation which result in rising prices of imported steel, steel byproducts, aluminum, and aluminum byproducts used as raw materials in the production of measurement devices, and our ability to pass those costs on to our customers or require our suppliers to absorb such costs;
changes in foreign regulation which may result in rising prices of our measurement devices sold as exports to our international customers, our customers' willingness to absorb incremental import tariffs, and the corresponding impact on our profitability;
our inability to successfully identify and acquire target companies and achieve expected benefits from, and effectively integrate, acquisitions that are consummated;
the cyclical nature of the industries of our customers and material adverse changes in our customers’ access to liquidity and capital;
change in the potential for the computer-aided measurement (“CAM2”) market and the potential adoption rate for our products, which are difficult to quantify and predict;
our inability to protect our patents and other proprietary rights in the United States and foreign countries;
our inability to adequately establish and maintain effective internal controls over financial reporting;

19

Table of Contents

fluctuations in our annual and quarterly operating results and the inability to achieve our financial operating targets as a result of a number of factors including, without limitation (i) litigation and regulatory action brought against us, (ii) quality issues with our products, (iii) excess or obsolete inventory, shrinkage or other inventory losses due to product obsolescence, change in demand for our products, scrap or material price changes, (iv) raw material price fluctuations and other inflationary pressures, (v) expansion of our manufacturing capability, (vi) the size and timing of customer orders, (vii) the amount of time that it takes to fulfill orders and ship our products, (viii) the length of our sales cycle to new customers and the time and expense incurred in further penetrating our existing customer base, (ix) manufacturing inefficiencies associated with new product introductions, (x) costs associated with new product introductions, such as product development, marketing, assembly line start-up costs and low introductory period production volumes, (xi) the timing and market acceptance of new products and product enhancements, (xii) customer order deferrals in anticipation of new products and product enhancements, (xiii) the inability of our sales and marketing programs to achieve their sales targets, (xiv) start-up costs associated with opening new sales offices outside of the United States, (xv) fluctuations in revenue without proportionate adjustments in fixed costs, (xvi) inefficiencies in the management of our inventories and fixed assets, (xvii) compliance with government regulations including health, safety, and environmental matters, and (xviii) investment costs associated with the training and ramp-up time for new sales people;
changes in gross margins due to a changing mix of products sold and the different gross margins on different products and sales channels;
our inability to successfully comply with the requirements of the Restriction of use of Hazardous Substances Directive and the Waste Electrical and Electronic Equipment Directive in the European Union;
the inability of our products to displace traditional measurement devices and attain broad market acceptance;
the impact of competitive products and pricing on our current offerings;
the loss of our Chief Executive Officer or other key personnel;
difficulties in recruiting research and development engineers and application engineers;
the failure to effectively manage the effects of our growth;
the impact of reductions or projected reductions in government spending, or uncertainty regarding future levels of government expenditures, particularly in the defense sector;
variations in our effective income tax rate, which makes it difficult to predict our effective income tax rate on a quarterly and annual basis, and the impact of the U.S. Tax Cuts and Jobs Act of 2017 (the "Tax Cuts Act"), including the global intangible low-taxed income (“GILTI”) of foreign subsidiaries;
the loss of key suppliers and the inability to find sufficient alternative suppliers in a reasonable period of time or on commercially reasonable terms;
the impact of fluctuations in exchange rates;
the effect of estimates and assumptions with respect to critical accounting policies and the impact of the adoption of recently issued accounting pronouncements;
the magnitude of increased warranty costs from new product introductions and enhancements to existing products;
the sufficiency of our plants to meet manufacturing requirements;
the continuation of our share repurchase program;
the sufficiency of our working capital and cash flow from operations to fund our long-term liquidity requirements;
the impact of geographic changes in the manufacturing or sales of our products on our effective income tax rate;
our ability to comply with the requirements for favorable tax rates in foreign jurisdictions; and
other risks and uncertainties discussed in Part I, Item 1A. Risk Factors in our Annual Report on Form 10-K for the year ended December 31, 2017.
Moreover, new risks and uncertainties emerge from time to time, and we undertake no obligation to update publicly or review the risks and uncertainties included in this Quarterly Report on Form 10-Q, unless otherwise required by law.

20

Table of Contents

Overview
We are a global technology company that designs, develops, manufactures, markets and supports software driven, three-dimensional (“3D”) measurement, imaging and realization systems. This technology permits high-precision 3D measurement, imaging and comparison of parts and complex structures within production and quality assurance processes. Our devices are used for inspection of components and assemblies, rapid prototyping, reverse engineering, documenting large volume or structures in 3D, surveying and construction, as well as for investigation and reconstruction of accident sites or crime scenes. We sell the majority of our products through a direct sales force across a broad number of customers in a range of manufacturing, industrial, architecture, surveying, building information modeling, construction, public safety forensics, cultural heritage and other applications. Our FaroArm®, FARO ScanArm®, FARO Gage®, FARO Laser TrackerTM, FARO Laser Projector, FARO Cobalt Array Imager, and their companion CAM2®, BuildIT and RayTracerTM software solutions, provide for Computer-Aided Design (“CAD”) based inspection, factory-level statistical process control, high-density surveying and laser-guided assembly and production. Together, these products integrate the measurement, quality inspection, and reverse engineering functions with CAD and 3D software to improve productivity, enhance product quality, and decrease rework and scrap in the manufacturing process, mainly supporting applications in our Factory Metrology vertical. Our FARO Focus and FARO Scanner Freestyle3DX laser scanners, and their companion FARO SCENE, FARO PointSense, and FARO Zone public safety forensics software offerings, are utilized for a wide variety of 3D modeling, documentation and high-density surveying applications in our Construction Building Information Modeling (“Construction BIM” and formerly known as “Construction BIM-CIM”) and Public Safety Forensics verticals. Our FARO ScanArm®, FARO Cobalt Array Imager, FARO Scanner Freestyle3DX laser scanners and their companion SCENE software also enable a fully digital workflow used to capture real world geometry for the purpose of empowering design, enabling innovation, and speeding up the design cycle, supporting our Product Design vertical. FARO Visual InspectTM enables large, complex 3D CAD data to be transferred to a tablet device and then used for mobile visualization and comparison to real world conditions, facilitating in-process inspection, assembly, guidance and positioning for applications in our Factory Metrology and Construction BIM verticals. Our line of galvanometer-based scan heads and laser scan controllers are used in a variety of laser applications and are integrated into larger components and systems.
We derive our revenues primarily from the sale of our measurement equipment and related multi-faceted software programs. Revenue related to these products is generally recognized upon shipment. In addition, we sell extended warranties and training and technology consulting services relating to our products. We recognize the revenue from extended warranties on a straight-line basis over the term of the warranty, and revenue from training and technology consulting services when the services are provided.
We operate in international markets throughout the world and maintain sales offices in Australia, Brazil, Canada, China, France, Germany, India, Italy, Japan, Malaysia, Mexico, the Netherlands, Poland, Portugal, Singapore, South Korea, Spain, Switzerland, Thailand, Turkey, the United Kingdom, and the United States.
We manufacture our FaroArm®, FARO ScanArm®, and FARO Gage products in our manufacturing facility located in Switzerland for customer orders from Europe, the Middle East and Africa, in our manufacturing facility located in Singapore for customer orders from the Asia-Pacific region, and in our manufacturing facility located in Florida for customer orders from the Americas. We manufacture our FARO Focus in our manufacturing facilities located in Germany and Switzerland for customer orders from Europe, the Middle East and Africa and the Asia-Pacific region, and in our manufacturing facility located in Pennsylvania for customer orders from the Americas. We manufacture our FARO Freestyle3DX products in our facility located in Germany. We manufacture our FARO Cobalt Array Imager, FARO Laser Projector and FARO Laser TrackerTM products in our facility located in Pennsylvania. We expect all of our existing plants to have the production capacity necessary to support our volume requirements through the remainder of 2018.
We account for wholly owned foreign subsidiaries in the currency of the respective foreign jurisdiction; therefore, fluctuations in exchange rates may have an impact on the value of the intercompany account balances denominated in different currencies and reflected in our condensed consolidated financial statements. We are aware of the availability of off-balance sheet financial instruments to hedge exposure to foreign currency exchange rates, including cross-currency swaps, forward contracts and foreign currency options. However, we have not used such instruments in the past, and none were utilized in 2017 or the three months ended March 31, 2018.
Over the past decade, we have achieved profitability on an annual basis, with the exception of a loss in 2009 that resulted primarily from the decline of the global economy that year, and a loss in 2017 that resulted primarily from the enactment and the impact of the Tax Cuts Act further described in Note 11 – Income Taxes in Part I, Item 1 of this Quarterly Report on Form 10-Q. Historically, our sales have grown as a result of continuing market demand for and acceptance of our products, increased sales activity in part through additional sales staff worldwide, new product launches or enhancements, and acquisitions. Our historical financial performance is not indicative of our future financial performance.


21

Table of Contents

In the first quarter of 2018, we renamed our segments from "Construction BIM-CIM" to "Construction BIM" and from "Other" to "Emerging Verticals" and combined our historical Factory Metrology and 3D Machine Vision verticals under a single 3D Factory reporting segment, as further discussed in Note 1 – Description of Business in Part I, Item 1 of this Quarterly Report on Form 10-Q. The amounts related to our segment information for the three months ended March 31, 2017 have been restated throughout this Quarterly Report on Form 10-Q to reflect the change in reporting segments.
Amounts reported in millions within this Quarterly Report on Form 10-Q are computed based on the amounts in thousands. As a result, the sum of the components reported in millions may not equal the total amount reported in millions due to rounding. Certain columns and rows within the tables that follow may not add due to the use of rounded numbers. Percentages presented are calculated based on the respective amounts in thousands.

22

Table of Contents


Results of Operations
The following table sets forth, for the periods indicated, our unaudited results of operations expressed as dollar amounts and as a percentage of total sales.
 
Three months ended March 31,
(dollars in thousands)
2018
 
% of Sales
 
2017
 
% of Sales
Sales
 
 
 
 
 
 
 
Product
$
70,581

 
76.0
 %
 
$
62,380

 
76.5
 %
Service
22,253

 
24.0
 %
 
19,182

 
23.5
 %
Total sales
92,834

 
100.0
 %
 
81,562

 
100.0
 %
Cost of Sales
 
 
 
 
 
 
 
Product
26,884

 
29.0
 %
 
27,058

 
33.2
 %
Service
12,164

 
13.1
 %
 
10,755

 
13.2
 %
Total cost of sales
39,048

 
42.1
 %
 
37,813

 
46.4
 %
Gross Profit
53,786

 
57.9
 %
 
43,749

 
53.6
 %
Operating Expenses:
 
 
 
 
 
 
 
Selling and marketing
28,271

 
30.5
 %
 
22,872

 
28.0
 %
General and administrative
11,073

 
11.9
 %
 
10,699

 
13.1
 %
Depreciation and amortization
4,343

 
4.7
 %
 
3,718

 
4.6
 %
Research and development
9,406

 
10.1
 %
 
8,466

 
10.4
 %
Total operating expenses
53,093

 
57.2
 %
 
45,755

 
56.1
 %
Income (loss) from operations
693

 
0.7
 %
 
(2,006
)
 
(2.5
)%
Other expense (income)
 
 
 
 
 
 
 
Interest income, net
(73
)
 
(0.1
)%
 
(82
)
 
(0.1
)%
Other expense, net
184

 
0.2
 %
 
8

 
 %
Income (loss) before income tax expense (benefit)
582

 
0.6
 %
 
(1,932
)
 
(2.4
)%
Income tax expense (benefit)
127

 
0.1
 %
 
(471
)
 
(0.6
)%
Net income (loss)
$
455

 
0.5
 %
 
$
(1,461
)
 
(1.8
)%

Consolidated Results
Three Months Ended March 31, 2018 Compared to the Three Months Ended March 31, 2017
Sales. Total sales increased by $11.2 million, or 13.8%, to $92.8 million for the three months ended March 31, 2018 from $81.6 million for the three months ended March 31, 2017. Total product sales increased by $8.2 million, or 13.1%, to $70.6 million for the three months ended March 31, 2018 from $62.4 million for the three months ended March 31, 2017. Our product sales increased primarily due to increased unit sales in our Construction BIM segment and higher average selling prices in our 3D Factory segment. Service revenue increased by $3.1 million, or 16.0%, to $22.3 million for the three months ended March 31, 2018 from $19.2 million for the three months ended March 31, 2017, primarily due to an increase in warranty and customer service revenue driven by the growth of our installed, serviceable base and focused sales initiatives. Foreign exchange rates had a positive impact on sales of $5.0 million, increasing our overall sales growth rate by approximately 6.1 percentage points, primarily due to the strengthening of the Euro, British Pound, Japanese Yen, and Chinese Yuan, relative to the U.S. dollar.
Gross profit. Gross profit increased by $10.1 million, or 22.9%, to $53.8 million for the three months ended March 31, 2018 from $43.7 million for the three months ended March 31, 2017. Gross margin increased to 57.9% for the three months ended March 31, 2018 from 53.6% in the prior year period. Gross margin from product revenue increased by 5.3 percentage points to 61.9% for the three months ended March 31, 2018 from 56.6% in the prior year period. This increase was primarily due to higher average selling prices in our 3D Factory segment and improved manufacturing efficiencies in our Construction BIM and Emerging Verticals segments. Gross margin from service revenue increased by 1.4 percentage points to 45.3% for the three months ended March 31, 2018 from 43.9% for the prior year period primarily as a result of higher service revenue.

23

Table of Contents

Selling and Marketing Expenses. Selling and marketing expenses increased by $5.4 million, or 23.6%, to $28.3 million for the three months ended March 31, 2018 from $22.9 million for the three months ended March 31, 2017. This increase was driven primarily by higher compensation expense, reflecting an increase in selling headcount as part of our strategic initiatives to drive sales growth, and $0.6 million in employee severance expense. Selling and marketing expenses as a percentage of sales were 30.5% for the three months ended March 31, 2018, compared with 28.0% of sales for the three months ended March 31, 2017. Our worldwide period-ending selling headcount increased by 61, or 10.3%, to 653 at March 31, 2018, from 592 at March 31, 2017.
General and administrative expenses. General and administrative expenses increased by $0.4 million, or 3.5%, to $11.1 million for the three months ended March 31, 2018 from $10.7 million for the three months ended March 31, 2017. This increase was driven primarily by professional service fees related to our acquisitions in the first quarter of 2018. General and administrative expenses decreased to 11.9% of sales for the three months ended March 31, 2018 from 13.1% of sales for the three months ended March 31, 2017 primarily due to leveraging the effect of increased sales.
Depreciation and amortization expenses. Depreciation and amortization expenses increased by $0.6 million, or 16.8%, to $4.3 million for the three months ended March 31, 2018 from $3.7 million for the three months ended March 31, 2017. This increase was driven primarily by higher amortization of intangible assets related to our Nutfield acquisition in April 2017 and new production tooling for the manufacture of new products.
Research and development expenses. Research and development expenses increased by $0.9 million, or 11.1%, to $9.4 million for the three months ended March 31, 2018 from $8.5 million for the three months ended March 31, 2017. This increase was mainly due to increased headcount and costs to accelerate new product development. Research and development expenses as a percentage of sales were 10.1% and 10.4% for the three months ended March 31, 2018 and March 31, 2017, respectively.
Other (income) expense, net. For the three months ended March 31, 2018, we had other expense of $0.1 million compared to other income of $0.1 million for the three months ended March 31, 2017. The change was largely driven by the effect of foreign exchange rates.
Income tax expense (benefit). Income tax expense was $0.1 million for the three months ended March 31, 2018, compared with an income tax benefit of $0.5 million for the three months ended March 31, 2017. Our effective tax rate was 21.8% for the three months ended March 31, 2018 compared with a 24.4% benefit in the prior year period. The change in our income tax expense (benefit) and effective tax rate was primarily due to pretax income during the three months ended March 31, 2018 compared to a pretax loss during the three months ended March 31, 2017. Our effective tax rate could be impacted positively or negatively by geographic changes in the manufacturing or sales of our products and the resulting effect on taxable income in each jurisdiction, as well as by any change in statutory tax rates in a jurisdiction.
Net income (loss). Our net income was $0.5 million for the three months ended March 31, 2018 compared to a net loss of $1.5 million for the prior year period, reflecting the impact of the factors described above.

Segment Results
Three Months Ended March 31, 2018 Compared to the Three Months Ended March 31, 2017
Total sales by segment for the three months ended March 31, 2018 and March 31, 2017 were as follows (in thousands):
 
Three Months Ended
 
March 31, 2018
 
% of
Total
 
March 31, 2017
 
% of
Total
3D Factory
$
61,358

 
66.1
%
 
$
57,222

 
70.2
%
Construction BIM
22,682

 
24.4
%
 
18,941

 
23.2
%
Emerging Verticals
8,794

 
9.5
%
 
5,399

 
6.6
%
Total sales
$
92,834

 
 
 
$
81,562

 
 
We use segment profit to evaluate the performance of our reportable segments, which are 3D Factory, Construction BIM and Emerging Verticals. Segment profit is calculated as gross profit, net of selling and marketing expenses, for the reporting segment. The discussion of segment results for the three months ended March 31, 2018 and 2017 presented below is based on segment profit, as described above, and segment profit as a percent of sales, which is calculated as segment profit divided by net sales for such reporting segment, which we believe will aid investors in understanding and analyzing our operating results. Our definition of segment profit may not be comparable to similarly-titled measures reported by other companies. For additional information, including a reconciliation of total segment profit to income (loss) from operations, see Note 13 – Segment Reporting, in Part I, Item 1 of this Quarterly Report on Form 10-Q.

24

Table of Contents

3D Factory
 
 
 
 
(dollars in thousands)
 
Three Months Ended
 
 
March 31, 2018
 
March 31, 2017
Total sales
 
$
61,358

 
$
57,222

Segment profit
 
$
18,372

 
$
16,669

Segment profit as a % of 3D Factory segment sales
 
29.9
%
 
29.1
%
Sales. Total sales in our 3D Factory segment increased by $4.2 million, or 7.3%, to $61.4 million for the three months ended March 31, 2018 from $57.2 million in the prior year period. The increase was driven by higher average selling prices and growth in service revenue, partially offset by a reduction in product unit sales.
Segment profit. Segment profit in our 3D Factory segment increased by $1.7 million, or 10.2%, to $18.4 million for the three months ended March 31, 2018 from $16.7 million in the prior year period. This increase was primarily due to higher average selling prices and growth in service revenue, partially offset by higher selling and marketing expenses resulting from an increase in selling headcount as part of our strategic initiatives to drive sales growth.
Construction BIM
 
 
 
 
(dollars in thousands)
 
Three Months Ended
 
 
March 31, 2018
 
March 31, 2017
Total sales
 
$
22,682

 
$
18,941

Segment profit
 
$
6,451

 
$
4,078

Segment profit as a % of Construction BIM segment sales
 
28.4
%
 
21.5
%
Sales. Total sales in our Construction BIM segment increased by $3.8 million, or 19.8%, to $22.7 million for the three months ended March 31, 2018 from $18.9 million in the prior year period, primarily reflecting an increase in product unit sales and service revenue.
Segment profit. Segment profit in our Construction BIM segment increased by $2.4 million, or 58.2%, to $6.5 million for the three months ended March 31, 2018 from $4.1 million in the prior year period, primarily driven by an increase in product unit sales and service revenue, and a reduction in production costs, partially offset by an increase in selling headcount as part of our strategic initiatives to drive sales growth.
Emerging Verticals
 
 
(dollars in thousands)
 
Three Months Ended
 
 
March 31, 2018
 
March 31, 2017
Total sales
 
$
8,794

 
$
5,399

Segment profit
 
$
692

 
$
130

Segment profit as a % of Emerging Verticals segment sales
 
7.9
%
 
2.4
%
Sales. Total sales in our Emerging Verticals segment increased by $3.4 million, or 62.9%, to $8.8 million for the three months ended March 31, 2018 from $5.4 million in the prior year period, primarily due to higher product unit sales in our Public Safety Forensics and Product Design verticals as we continue to strategically invest in new markets.
Segment profit. Segment profit in our Emerging Verticals segment was $0.7 million for the three months ended March 31, 2018 compared to $0.1 million in the prior year period. This increase of $0.6 million was primarily due to higher product sales resulting from the increase in selling headcount as part of our strategic initiatives to staff these verticals with a dedicated sales force to drive sales growth.





25

Table of Contents

Liquidity and Capital Resources
Cash and cash equivalents decreased by $2.2 million to $138.8 million at March 31, 2018 from $141.0 million at December 31, 2017. The decrease was primarily driven by cash paid for acquisitions of $4.0 million, property and equipment purchases of $2.2 million and $4.0 million of cash used in operating activities, partially offset by $6.8 million in proceeds received from the exercise of options during the three months ended March 31, 2018.
Cash used in operations was $4.0 million during the three months ended March 31, 2018, compared to cash used in operations of $0.3 million during the three months ended March 31, 2017. The change was mainly due to an increase in inventory to support new product demand, a decrease in accounts payable and accrued liabilities, and a decrease in income taxes payable during the three months ended March 31, 2018 compared to the same period in the prior year.
Cash used in investing activities during the three months ended March 31, 2018 was $6.9 million compared to $2.1 million of cash used in investing activities during the three months ended March 31, 2017. The change was primarily due to $4.0 million in cash paid for the acquisition of businesses in March 2018, compared to no acquisition activity during the three months ended March 31, 2017.
Cash flows provided by financing activities was $6.7 million during the three months ended March 31, 2018, compared to cash provided by financing activities of $0.3 million for the three months ended March 31, 2017. The change was primarily due to $6.8 million in cash received from the exercise of stock options during the first quarter of 2018 compared to $0.3 million in the first quarter of 2017.
Of our cash and cash equivalents, $93.9 million was held by foreign subsidiaries as of March 31, 2018. On December 22, 2017, the United States enacted the Tax Cuts Act, resulting in significant modifications to existing tax law, which includes a provision for repatriation through a one-time transition tax. We continue to gather and analyze information, including whether or not we will repatriate cash to the United States from our foreign subsidiaries.
On November 24, 2008, our Board of Directors approved a $30.0 million share repurchase program. Acquisitions for the share repurchase program may be made from time to time at prevailing prices, as permitted by securities laws and other legal requirements, and subject to market conditions and other factors. The share repurchase program may be discontinued at any time. There is no expiration date or other restriction governing the period over which we can repurchase shares under the program. In October 2015, our Board of Directors authorized an increase to the existing share repurchase program from $30.0 million to $50.0 million. We made no stock repurchases during the three month period ended March 31, 2018 under this program. As of March 31, 2018, we had authorization to repurchase $18.3 million remaining under the repurchase program.
We believe that our working capital and anticipated cash flow from operations will be sufficient to fund our long-term liquidity operating requirements during 2018.
We have no off balance sheet arrangements.
Contractual Obligations and Commercial Commitments
We enter into purchase commitments for products and services in the ordinary course of business. These purchases generally cover production requirements for 60 to 120 days as well as materials necessary to service customer units through the product lifecycle and for warranty commitments. As of March 31, 2018, we had $53.0 million in purchase commitments that are expected to be delivered within the next 12 months. To ensure adequate component availability in preparation for new product introductions, as of March 31, 2018, we also had $11.1 million in long-term commitments for purchases to be delivered after 12 months. Other than as described in the preceding sentences, there have been no material changes to the contractual obligations and commercial commitments table included in Part II, Item 7 of our Annual Report on Form 10-K for the year ended December 31, 2017.
Critical Accounting Policies
The preparation of our condensed consolidated financial statements requires our management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues, and expenses, as well as disclosure of contingent assets and liabilities. We base our estimates on historical experience, along with various other factors believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Some of these judgments can be subjective and complex and, consequently, actual results may differ from these estimates under different assumptions or conditions. A discussion of our critical accounting policies is included in Part II, Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in our Annual Report on Form 10-K for the year ended December 31, 2017, as filed with the Securities and Exchange Commission on February 21, 2018. As of March 31, 2018, our critical accounting policies have not changed from those described in our Annual Report on Form 10-K for the year ended December 31, 2017.

26

Table of Contents

Item 3. Quantitative and Qualitative Disclosures About Market Risk
Foreign Exchange Exposure
We conduct a significant portion of our business outside the United States. As of and for the three months ended March 31, 2018, 60% of our revenue was invoiced, and a significant portion of our operating expenses were paid, in foreign currencies, and 57% of our assets were denominated in foreign currencies. Fluctuations in exchange rates between the U.S. dollar and such foreign currencies may have a material effect on our results of operations and financial condition and could specifically result in foreign exchange gains and losses. The impact of future exchange rate fluctuations on the results of our operations cannot be accurately predicted due to our constantly changing exposure to various currencies, and the fact that all foreign currencies do not react in the same manner in relation to the U.S. dollar. Our most significant exposures are to the Euro, British pound sterling, Swiss franc, Japanese yen, Chinese yuan renminbi, Mexican peso and Brazilian real. To the extent that the percentage of our non-U.S. dollar revenues derived from international sales increases in the future, our exposure to risks associated with fluctuations in foreign exchange rates may increase. We are aware of the availability of off-balance sheet financial instruments to hedge exposure to foreign currency exchange rates, including cross-currency swaps, forward contracts and foreign currency options. However, we have not used such instruments in the past, and none were utilized in 2017 or the three months ended March 31, 2018.

27

Table of Contents

Item 4. Controls and Procedures
Evaluation of Disclosure Controls and Procedures
We are responsible for establishing and maintaining disclosure controls and procedures, as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), that are designed to provide reasonable assurance that information required to be disclosed in our reports filed under the Exchange Act, such as this Quarterly Report on Form 10-Q, is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures also include, without limitation, controls and procedures that are designed to provide reasonable assurance that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure.
Under the supervision and with the participation of our management, including our Chief Executive Officer and our Chief Financial Officer, we evaluated the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act) as of March 31, 2018. Based on that evaluation, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures were effective as of March 31, 2018 to provide reasonable assurance that information required to be disclosed in this Quarterly Report on Form 10-Q was recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and was accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure.
Changes in Internal Control Over Financial Reporting
During the quarter ended March 31, 2018, there was no change in our internal control over financial reporting (as such term is defined in Rule 13a-15(f) under the Exchange Act) that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

28

Table of Contents

PART II. OTHER INFORMATION

Item 1. Legal Proceedings
We are not involved in any legal proceedings other than routine litigation arising in the normal course of business, none of which we believe will have a material adverse effect on our business, financial condition or results of operations.

Item 1A. Risk Factors
In addition to the other information set forth in this Quarterly Report on Form 10-Q, you should carefully consider the factors discussed under “Risk Factors” in our Annual Report on Form 10-K for the year ended December 31, 2017, as filed with the SEC, and in this Item 1A before deciding to invest in, or retain, shares of our common stock. These risks could materially and adversely affect our business, financial condition, and results of operations. The risks described in our Annual Report on Form 10-K for the year ended December 31, 2017 and in this Item 1A are not the only risks we face. Our operations could also be affected by additional factors that are not presently known by us or by factors that we currently consider immaterial to our business. Except as set forth below, there have been no material changes in our risk factors from those set forth in our Annual Report on Form 10-K for the year ended December 31, 2017:
The following risk factors have been added:

Increases in the cost of raw materials or components used in our products could negatively impact our business and profitability.
Our products contain various raw materials, including steel, steel byproducts, aluminum and aluminum byproducts. We use raw materials directly in manufacturing and in components that we purchase from our suppliers. These raw materials are subject to extensive laws, governmental regulations and policies. Changes to the laws, governmental regulations and policies governing these raw materials could significantly increase the cost of such raw materials and, correspondingly, the cost of manufacturing our products. If the costs of our raw materials increase, whether due to changes in laws, governmental regulations or policies or for other reasons, we may not be able to pass on these costs to our customers, which could have a material adverse effect on our business, results of operations and financial condition. Even in the event that increased costs can be passed through to our customers, our gross margin percentages would decline. Additionally, our suppliers are also subject to fluctuations in the prices of raw materials and may attempt to pass all or a portion of such increases on to us. In the event they are successful in doing so, our margins would decline.

Changes in export regulations could increase the cost of our products sold to our international customers, which could negatively impact our sales and profitability.
Our international sales operations are subject to extensive laws, governmental regulations and policies, including but not limited to export regulations. Changes in export regulations could increase the cost of our products sold as exports to our international customers. If our international customers are not willing to absorb the incremental import tariffs, it could negatively impact our sales to such customers, as well as our profitability.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds
Purchases of Equity Securities by the Issuer Under the Share Repurchase Plan
On November 24, 2008, our Board of Directors approved a $30.0 million share repurchase program. Acquisitions for the share repurchase program may be made from time to time at prevailing prices, as permitted by securities laws and other legal requirements, and subject to market conditions and other factors. The share repurchase program may be discontinued at any time. There is no expiration date or other restriction governing the period over which we can repurchase shares under the program. In October 2015, our Board of Directors authorized an increase to the existing share repurchase program from $30.0 million to $50.0 million. We made no stock repurchases during the three month period ended March 31, 2018 under this program. As of March 31, 2018, we had authorization to repurchase $18.3 million remaining under the repurchase program.

29

Table of Contents

Item 6. Exhibits
 
INDEX TO EXHIBITS
  
 
 
 
  
 
 
 
  
 
 
 
 
 
 
 
  
 
 
 
  
 
 
 
  
 
 
 
  
 
 
 
101.INS
  
XBRL Instance Document
 
 
 
101.SCH
  
XBRL Taxonomy Extension Schema Document
 
 
 
101.CAL
  
XBRL Calculation Linkbase Document
 
 
 
101.DEF
  
XBRL Taxonomy Extension Definition Linkbase Document
 
 
 
101.LAB
  
XBRL Taxonomy Labels Linkbase Document
 
 
 
101.PRE
  
XBRL Taxonomy Presentation Linkbase Document
 
 
 

30

Table of Contents

SIGNATURE
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 
 
 
FARO Technologies, Inc.
 
 
 
(Registrant)
 
 
 
 
Date: April 25, 2018
By:
 
/s/ Robert Seidel
 
 
 
Name: Robert Seidel
 
 
 
Title: Chief Financial Officer
 
 
 
(Duly Authorized Officer and Principal Financial Officer)


31