Fathom Digital Manufacturing Corp - Annual Report: 2022 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2022

OR

Commission File Number: 001-39994

FATHOM DIGITAL MANUFACTURING CORPORATION

(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code: (262) 367-8254

Securities registered pursuant to Section 12 (b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements.☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

The aggregate market value of the registrant's Class A common stock beneficially held by non-affiliates of the registrant, based on the closing price of the shares of Class A common stock on the New York Stock Exchange on April 4, 2023, was $22,989,506. Shares of the Class A common stock beneficially owned by each executive officer and director of the registrant and each holder of more than 10% of our Class A common stock have been excluded from this calculation because such persons may be deemed to be affiliated. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

As of April 4, 2023, there were 69,546,514 shares of the registrant's Class A common stock outstanding and 66,692,781 shares of the registrant's vote-only, non-economic Class B common stock outstanding.

Table of Contents

Explanatory Note

This Annual Report on Form 10-K includes information pertaining to periods prior to the closing of the Business Combination (as defined in "Item 1. Business - Corporate Information" of this Annual Report). Refer to Note 1 “Nature of Business” and Note 2 "Significant Accounting Policies - Basis of Presentation" of the notes to our consolidated financial statements contained in this Annual Report for further information regarding the basis of presentation. See "Item 1. Business - Corporate Information" of this Annual Report for a description of the Business Combination, which was completed with Altimar Acquisition Corp. II on December 23, 2021. Throughout this Annual Report, references to “we,” “us,” and “our” refer to Fathom Digital Manufacturing Corporation ("Fathom" or the "Company") and its consolidated subsidiaries as the context so requires.

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

Certain statements made in this Annual Report on Form 10-K are “forward looking statements.” Statements regarding our expectations regarding the business are “forward looking statements.” In addition, words such as “estimates,” “projected,” “expects,” “estimated,” “anticipates,” “forecasts,” “plans,” “intends,” “believes,” “seeks,” “may,” “will,” “would,” “future,” “propose,” “target,” “goal,” “objective,” “outlook” and variations of these words or similar expressions (or the negative versions of such words or expressions) are intended to identify forward-looking statements. The forward-looking statements contained in this Annual Report and in our other periodic filings are not guarantees of future performance, conditions or results and are based on our current expectations and beliefs concerning future developments and their potential effects on us. There can be no assurance that future developments affecting us will be those that we have anticipated. These forward-looking statements involve a number of risks, uncertainties (some of which are beyond our control) or other assumptions that may cause actual results or performance to be materially different from those expressed or implied by these forward-looking statements. These risks and uncertainties include, but are not limited to, those factors described under "Risk Factor Summary, Item 1A. Risk Factors,” and "Item7. Management's Discussion and Analysis of Financial Condition and Results of Operations" below. Should one or more of these risks or uncertainties materialize, or should any of our assumptions prove incorrect, actual results may vary in material respects from those anticipated in these forward-looking statements. We may face additional risks and uncertainties that are not presently known to us, or that we deem to be immaterial, which may also impair our business, financial condition, or prospects. We undertake no obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as may be required under applicable securities laws.

1

risk factor summary

The following is a summary of the risks and uncertainties that could adversely affect our business, financial condition and results of operations and should be read in conjunction with the complete discussion of risk factors set forth in "Item 1A. Risk Factors." Some of the factors could materially and adversely affect our business, financial conditions and results of operations include, but are not limited to the following:

2

Item 1. Business.

Throughout this Annual Report on Form 10-K, references to “we,” “us,” and “our” refer to Fathom Digital Manufacturing Corporation ("Fathom", the "Company") and its consolidated subsidiaries as the context so requires.

Fathom, through our operating subsidiary Fathom Holdco, LLC (“Fathom OpCo” or "Predecessor"), is a leading on-demand digital manufacturing platform in North America, providing comprehensive product development and production part manufacturing to many of the largest and most innovative companies in the world. We have extensive expertise in both additive and traditional manufacturing, enabling our agile, technology-agnostic platform to blend manufacturing technologies and processes to deliver hybridized solutions designed to meet the specific needs of our customers. This flexible problem-solving approach empowers our customers to accelerate their product development cycles, reducing manufacturing lead times for low to mid-volume production.

We combine diverse, scaled manufacturing capabilities and deep technical know-how to enable our customers to get to market faster, putting their design and product goals above the manufacturing limitations often imposed by other service providers. We pair our expertise and manufacturing capabilities with a unified proprietary suite of software, which becomes an extension of the customer’s digital product development and low to mid-volume production threads. By continuously augmenting our software suite to stay in tune with evolving Industry 4.0 trends, we believe our platform is ideally suited to serve the product development and low-to mid-volume production parts needs of the largest and most innovative companies in the world.

Our differentiated strategy focuses on speed, problem solving, adaptive technical responsiveness, and a focus on manufacturing to meet customers’ design intent, allowing our customers to iterate faster and shorten their product development and production cycles from months to days.

Our deep technical expertise and integrated, software-driven approach underpin a comprehensive suite of capabilities, with over 25 unique manufacturing processes spread across 12 manufacturing facilities with nearly 450,000 square feet of manufacturing capacity in the United States ("U.S."). Our scale and breadth of offerings allows our customers to consolidate their supply chain and product development needs and to source through a single supplier. Fathom seamlessly blends in-house capabilities of 530+ advanced manufacturing systems across plastic and metal additive technologies (90+ industrial-grade systems), computer numerical control ("CNC") machining, injection molding and tooling, precision sheet metal fabrication, and design engineering, catering to a broad set of end markets. Fathom’s manufacturing technologies and capacity are further extended through utilization of a selected group of highly qualified suppliers who specialize in injection molding and tooling and CNC machining.

With over 35 years of industry experience, Fathom is at the forefront of the Industry 4.0 digital manufacturing revolution, serving customers in the technology, defense, aerospace, medical, automotive and IOT sectors. Fathom’s certifications include: International Organization for Standardization ("ISO") 9001:2015, ISO 13485:2016, AS9100:2016, NIST800-171 and International Traffic in Arms Regulations ("ITAR") registered.

Fathom is also a platform built for taking advantage of attractive future merger and acquisition opportunities. Fathom’s acquisition strategy is enabled by our unique integration playbook including our proprietary software platform.

Fathom’s business was founded in 1984 under the name Midwest Composite Technologies, LLC ("MCT"). Following the merger of MCT and Kemeera, LLC in 2019, the business was rebranded to operate under the “Fathom Digital Manufacturing” name and key technical capabilities were added in direct response to the needs of our largest and most innovative corporate customers. Today, Fathom is the result of the successful integration of 13 complementary companies, acquired over the past four years, creating a robust on-demand digital manufacturing platform with a proven array of additive and traditional manufacturing capabilities.

As a result of our scale and superior offerings, we have developed a loyal base of approximately 2,500 customers, including many of the largest and most innovative companies in the world, with excellent representation across Fortune’s 500 list. Over the year ended December 31, 2022, no single customer represented more than 10% of our total revenue.

Our target market consists of the highly fragmented U.S. low-to mid-volume manufacturing market of CNC machining, injection molding, precision sheet metal and additive manufacturing. This market is projected to grow, fueled by increased demand for additive manufacturing and continuation of the trend of customers increasingly outsourcing their product development prototyping and low-to mid-volume manufacturing needs.

3

Our People

Our employees are the foundation of Fathom’s enterprise and are essential to maintaining our business model and competitive advantages. As of December 31, 2022, we had 708 employees working across our U.S. locations. Our employees are distributed across functions, including engineering, production, sales, marketing, and general corporate functions. To date, we have not experienced any work stoppages and consider our relationship with our employees to be good. None of our employees are subject to a collective bargaining agreement or represented by a labor union.

Our human capital resource objectives include, as applicable, identifying, recruiting, retaining, incentivizing and integrating our existing and additional employees. The principal purpose of our equity incentive plans is to attract, retain and motivate selected employees, consultants and directors through the granting of equity-based compensation awards and cash-based performance bonus awards.

The health and well-being of our employees are critical to our ongoing ability to operate and serve our customers. We are committed to ensuring the safety and well-being of our employees across each location and job function – this includes providing broad benefits to support their health and wellness needs. We continue to place the utmost importance on complying with governmental regulations and health authority guidance to ensure that the appropriate steps are taken to protect the well-being of all people engaged with our business.

Government Regulations

We are subject to various laws, regulations and permitting requirements of federal, state, and local authorities, including related to environmental and health and safety. We are also subject to various U.S. and foreign laws and regulations related to anti-corruption, data privacy, use and security, embargoes, sanctions, and trade and export controls, including those of the jurisdictions in which we operate, source from, or make sales to. We believe that we are in material compliance with all such laws, regulations, and permitting requirements. Changes in current laws or regulations or the imposition of new laws and regulations in the U.S. or elsewhere regarding our business operations and activities may impede our growth, significantly increase our operating costs and impair our business, financial condition or results of operations.

Environmental Matters

We are subject to domestic environmental laws and regulations governing our operations, including, but not limited to, emissions into the air and water and the use, handling, disposal, and remediation of hazardous substances. A certain risk of environmental liability is inherent in our production activities. These laws and regulations govern, among other things, the generation, use, storage, registration, handling, and disposal of chemicals and waste materials, the presence of specified substances in electrical products, the emission and discharge of hazardous materials into the ground, air, or water, the cleanup of contaminated sites, including any contamination that results from spills due to our failure to properly dispose of chemicals and other waste materials, and the health and safety of our employees. We are required to obtain environmental permits from governmental authorities for certain operations. The cost of complying with current and future environmental laws applicable to our operations, or the liabilities arising from past releases of, or exposure to, hazardous substances, may result in future expenditures.

Corporate Information

Fathom OpCo, a Delaware limited liability company, was formed in April 2021 for the purpose of holding a 100 percent equity interest in each of MCT Group Holdings, LLC and its subsidiaries ("MCT Holdings") and in Incodema Holdings, LLC and its subsidiaries ("Incodema Holdings"). On April 30, 2021 Incodema Holdings and MCT Holdings were recapitalized through an exchange of equity pursuant to which each member of Incodema Holdings and each member of MCT Holdings exchanged their equity interests in Incodema Holdings and MCT Holdings, respectively, for equity interests in Fathom OpCo. As a result of this reorganization, each of Incodema Holdings and MCT Holdings are wholly owned subsidiaries of Fathom OpCo.

On December 23, 2021 (the “Closing Date”), Altimar Acquisition Corp. II, a blank check company incorporated as a Cayman Islands exempted company (“Altimar II”), domesticated as a Delaware corporation (the “Domestication”) and changed its name to “Fathom Digital Manufacturing Corporation.” Immediately following the Domestication, Fathom completed a business combination (the “Business Combination”) with Fathom OpCo pursuant to the terms of the Business Combination Agreement, dated as of July 15, 2021, as amended by Amendment No. 1 to Business Combination Agreement, dated as of November 16, 2021 (as so amended, the “BCA” or the “Business Combination Agreement”), by and among Altimar II, Fathom OpCo, Rapid Merger Sub, LLC, a direct, wholly owned subsidiary of Altimar II (“Merger Sub”), and the other parties thereto.

4

As part of the completion of the transactions contemplated by the Business Combination Agreement (the “Transactions,” and such completion, the “Closing”), Merger Sub merged with and into Fathom OpCo (the “Merger”), with Fathom OpCo being the surviving entity of the Merger. As a result of the Merger and the other Transactions, the combined company was organized in an “Up-C” structure, with Fathom now serving as the sole managing member of Fathom OpCo. Fathom OpCo is now owned in part by former public and private shareholders of Altimar II and in part by continuing equity owners of Fathom OpCo (the “Legacy Fathom Owners”). For a more detailed discussion of the Business Combination and the Transactions, see Fathom's Current Report on Form 8-K filed with the Securities and Exchange Commission on December 30, 2021.

Our mailing address is 1050 Walnut Ridge Drive, Hartland, WI 53029, and our telephone number is (262) 367-8254. Our Class A common stock is listed on the New York Stock Exchange under the symbol “FATH.” Unless the context requires otherwise, “Fathom,” “we,” the “Company,” “us” and “our” refer to Fathom Digital Manufacturing Corporation and our consolidated subsidiaries.

Available Information

Our website is located at www.fathommfg.com, and our investor relations website is located at http://investors.fathommfg.com/. We file reports with the Securities and Exchange Commission ("SEC"), and copies of our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to these reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act are available, free of charge, on our investor relations website as soon as reasonably practicable after we file such material electronically with or furnish it to the SEC. The SEC also maintains a website that contains our SEC filings. The address of the site is www.sec.gov. We use our http://investors.fathommfg.com/ and www.fathommfg.com websites as a means of disclosing material nonpublic information and for complying with our disclosure obligations under Regulation FD.

The contents of, or information accessible through, our websites are not incorporated by reference into this Annual Report on Form 10-K or in any other report or document we file or furnish with the SEC, and any references to our websites are intended to be inactive textual references only.

5

Item 1A. Risk Factors.

We have identified the following risks and uncertainties that may have a material adverse effect on our business, financial condition, results of operations or reputation. The risks described below are not the only risks we face. Additional risks not presently known to us or that we currently believe are not material may also significantly affect our business, financial condition, results of operations or reputation. Our business could be harmed by any of these risks. In assessing these risks, you should also refer to the other information contained in this Annual Report on Form 10-K including, but not limited to, the sections entitled “Cautionary Note Regarding Forward-Looking Statements”, and “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes.

Business Risks

We face significant competition and expect to face increasing competition in many aspects of our business, which could cause our operating results to suffer.

The digital manufacturing industry in which we operate is fragmented and highly competitive. We compete for customers with a wide variety of custom parts manufacturers and methods. Some of our current and potential competitors include captive in-house production capabilities, other custom parts manufacturers, brokers of custom parts and additive manufacturing vendors, including those utilizing 3D printing processes. Moreover, some of our existing and potential competitors are researching, designing, developing, and marketing other types of products and manufacturing capabilities. We also expect that future competition may arise from the development or improvement of allied or related techniques for digital manufacturing, including from the issuance of patents to other companies that may inhibit our ability to compete effectively. Furthermore, our competitors may attempt to adopt and improve upon key aspects of our business model, such as development of technology that automates much of the manual labor conventionally required to quote and manufacture custom parts, implementation of interactive web-based and automated user interface and quoting systems and/or building scalable operating models specifically designed for efficient custom parts production. Third-party Computer Aided Design ("CAD") software companies may develop software that mold-makers, injection molders and CNC machine shops could use to compete with our business model. Additive manufacturers may develop stronger, higher temperature resins or introduce other improvements that could more effectively compete with us on part quality. We may also, from time to time, establish alliances or relationships with other competitors or potential competitors, including 3D printer Original Equipment Manufacturers ("OEMs"). To the extent companies terminate such relationships and establish alliances and relationships with our competitors, our business could be harmed.

Existing and potential competitors may have substantially greater financial, technical, marketing and sales, manufacturing, distribution and other resources and name recognition than us, as well as experience and expertise in intellectual property rights, any of which may enable them to compete effectively against us. For example, a number of companies that possess substantial resources have announced that they are beginning digital manufacturing initiatives, which will further strengthen the competition we face.

Though we plan to continue to expend resources to develop new technologies, processes and manufacturing capabilities, we cannot assure you that we will be able to maintain our current competitive position or continue to compete successfully against current and future sources of competition. One challenge in developing new business opportunities is identifying custom parts categories for which our automated quotation and digital manufacturing processes offer an attractive value proposition, and we may not be able to identify any new custom parts categories with favorable economics similar to our existing offerings. If we do not keep pace with technological change, demand for our offerings may decline and our operating results may suffer.

Our success depends on our ability to deliver on-demand manufacturing capabilities and custom parts that meet the needs of our customers and to effectively respond to changes in our industry.

We derive almost all of our revenue from the manufacture and sale to our customers of quick-turn, low volume custom parts for prototyping, support of internal manufacturing and limited quantity product release up to mid volume production requirements. Our business has been and, we believe, will continue to be, affected by changes in our customers’ new product and product line introductions, requirements and preferences, rapid technological change and the emergence of new standards and practices, any of which could render our technology and manufacturing capabilities less attractive, uneconomical or obsolete. To the extent that our customers’ need for quick-turn to mid-volume production parts decreases significantly for any reason, it would likely have a material adverse effect on our business and operating results and harm our competitive position. In addition, CAD simulation and other technologies may reduce the demand for physical prototype parts. Therefore, we believe that to remain competitive, we must continually expend resources to enhance and improve our technology and manufacturing capabilities.

6

In particular, we plan to continue to focus a significant portion of those efforts to further develop our technology in areas such as our interactive project management platform and manufacturing processes, technology offerings and broaden the range of parts that we are able to manufacture. We believe successful execution of this part of our business plan is critical for our ability to compete in our industry and grow our business, and there are no guarantees we will be able to do so in a timely fashion, or at all. Broadening the range of parts and technologies that we are able to manufacture and offer is of particular importance because limitations in manufacturability are the primary reason we are not able to fulfill many quotation requests. There are no guarantees that the resources we devote to executing on this aspect of our business plan will improve our business and operating results or result in increased demand for our custom parts and manufacturing capabilities. Failures in this area could adversely impact our operating results and harm our reputation and brands. Even if we are successful in executing in this area, our industry is subject to rapid and significant technological change, and our competitors may develop new technologies and manufacturing capabilities that are superior to ours.

Any failure to effectively meet the needs of our customers or respond to changes in our industry on a cost-effective and timely basis, or at all, would likely have a material adverse effect on our business and operating results and harm our competitive position.

Our failure to meet our customers’ expectations regarding quick turnaround time, price or quality could adversely affect our business and results of operations.

We believe many of our customers are facing increased pressure from global competitors to be first to market with their finished products, often resulting in a need for quick turnaround of custom parts. We believe our ability to quickly quote, manufacture and ship custom parts has been an important factor in our results to date. There are no guarantees we will be able to meet customers’ increasing expectations regarding quick turnaround time. If we fail to meet our customers’ expectations regarding turnaround time in any given period, our business and results of operations will likely suffer.

Demand for our custom parts and manufacturing capabilities is sensitive to price. We believe our competitive pricing has been an important factor in our results to date. Therefore, changes in our pricing strategies can have a significant impact on our business and ability to generate revenue. Many factors, including our production and personnel costs and our competitors’ pricing and marketing strategies, can significantly impact our pricing strategies. If we fail to meet our customers’ price expectations in any given period, demand for our custom parts and manufacturing capabilities could be negatively impacted and our business and results of operations could suffer.

Most of our customers have a need for specific quality of quick-turn, on-demand custom parts. We believe our ability to create parts meeting our customers’ specifications and quality expectations is an important factor in our results to date. We cannot assure you that we will be able to continue to consistently manufacture custom parts that achieve the production specifications and quality that our customers expect. If we fail to meet our customers’ specifications and quality expectations in any given period, demand for our custom parts and manufacturing capabilities could be negatively impacted and our business and results of operations could suffer.

The strength of our brands is important to our business, and any failure to maintain and enhance our brands would hurt our ability to retain and expand our customer base as well as further penetrate existing customers.

Because our custom parts and manufacturing capabilities are sold primarily through our website, the success of our business depends in part upon our ability to attract new and repeat customers to our website in order to increase business and grow our revenue. Customer awareness and the perceived value of our brands will depend largely on the success of our marketing efforts, as well as our ability to consistently provide quality custom parts within the required timeframes and positive customer experiences, which we may not do successfully. A primary component of our business strategy is the continued promotion and strengthening of our brands. We may choose to increase our branding expense materially, but we cannot be sure that this investment will be profitable. If we are unable to successfully maintain and enhance our brands, this could have a negative impact on our business and ability to generate revenue.

7

Sales efforts to large customers involve risks that may not be present or that are present to a lesser extent with respect to sales to smaller organizations.

Attracting and retaining business from large enterprise customers is an element of our business strategy. Sales to large customers involve risks that may not be present or that are present to a lesser extent with sales to smaller organizations, such as longer sales cycles, more complex customer requirements, substantial upfront sales costs, less predictability in completing some of our sales and extended payment terms. A number of factors influence the length and variability of our sales cycle, including the need to educate potential customers about the uses and benefits of our platform, our various technologies and manufacturing capabilities, the longer period of time typically taken by large customers to evaluate and test our project management platform prior to making a purchase decision and placing an order, the discretionary nature of purchasing and budget cycles and the competitive nature of evaluation and purchasing approval processes. As a result, the length of our sales cycle, from identification of the opportunity to deal closure, may vary significantly from customer to customer, with sales to large enterprises typically taking longer to complete. Moreover, larger organizations may demand more customization, which would increase our upfront investment in the sales effort with no guarantee that these customers will seek to use our manufacturing capabilities widely enough across their organization to justify our substantial upfront investment. A portion of these customers may purchase our offerings on payment terms, requiring us to assume a credit risk for non-payment in the ordinary course of business. If we fail to effectively manage these risks associated with sales to large customers, our business, financial condition, and results of operations may be affected.

Our business depends in part on our ability to process a large volume of new custom part designs from a diverse group of customers and successfully identify significant opportunities for our business based on those submissions.

We believe the volume of new custom part designs we process and the size and diversity of our customer base give us valuable insight into the needs of our prospective customers. We utilize this industry knowledge to determine where we should focus our development resources. If the number of new custom part designs we process or the size and diversity of our customer base decrease, our ability to successfully identify significant opportunities for our business and meet the needs of existing or prospective customers could be negatively impacted. In addition, even if we do continue to process a large number of new custom part designs and work with a significant and diverse customer base, there are no guarantees that any industry knowledge we extract from those interactions will be successfully utilized to help us identify significant business opportunities or better understand the needs of our existing or prospective customers.

Wage increases and pressure in certain geographies may prevent us from sustaining our competitive advantage and may reduce our profit margin.

Measures are being taken in the U.S. and globally to increase minimum wages, and there is a shortage of skilled labor in certain locations leading to increased wage pressure. Similarly, with an increased global focus on environmental, social and corporate-governance concerns and sustainability, input costs have been steadily rising. Accordingly, we may need to increase the levels of labor compensation more rapidly than in the past to remain competitive in attracting and retaining the quality and amount of labor that our business requires. To the extent that we are not able to control or recoup wage increases through our pricing, wage increases may reduce our margins and cash flows, which could adversely affect our business.

The loss of one or more key members of our management team or personnel, or our failure to attract, integrate and retain additional personnel in the future, could harm our business and negatively affect our ability to successfully grow our business.

We are highly dependent upon the continued service and performance of the key members of our management team and other personnel. The loss of any of these individuals, each of whom is “at will” and may terminate his or her employment relationship with us at any time, could disrupt our operations and significantly delay or prevent the achievement of our business objectives. We believe that our future success will also depend in part on our continued ability to identify, hire, train and motivate qualified personnel. High demand exists for qualified senior management and other key personnel (including technical, engineering, product, finance and sales personnel) in the digital manufacturing industry. A possible shortage of qualified individuals in the regions where we operate might require us to pay increased compensation to attract and retain key employees, thereby increasing our costs. In addition, we face intense competition for qualified individuals from numerous companies, many of whom have substantially greater financial and other resources and name recognition than us. We may be unable to attract and retain suitably qualified individuals who are capable of meeting our growing operational, managerial and other requirements, or we may be required to pay increased compensation in order to do so. For example, our failure to attract and retain shop floor employees may inhibit our ability to fulfill production orders for our customers. Our failure to attract, hire, integrate and retain qualified personnel could impair our ability to achieve our business objectives.

8

All of our employees are at-will employees, meaning that they may terminate their employment relationship with us at any time, and their knowledge of our business and industry would be extremely difficult to replace. We generally enter into non-competition agreements with our employees and certain consultants. These agreements prohibit our employees and applicable consultants from competing directly with us or working for our competitors or customers while they work for us, and in some cases, for a limited period after they cease working for us. We may be unable to enforce these agreements under the laws of the jurisdictions in which our employees and applicable consultants work and it may be difficult for us to restrict our competitors from benefiting from the expertise that our former employees or consultants developed while working for us. If we cannot demonstrate that our legally protectable interests will be harmed, we may be unable to prevent our competitors from benefiting from the expertise of our former employees or consultants and our ability to remain competitive may be diminished.

One element of our growth strategy relies on business acquisitions. We may not realize the anticipated benefits of such acquisitions, and any acquisition, strategic relationship, joint venture, or investment could disrupt our business and harm our operating results and financial condition.

Our business and customer base have been built in part through organic growth, but also through acquisitions of businesses that increase market share in our current markets or expand into other markets, or broaden our technology, intellectual property or product line capabilities. We have completed 13 acquisitions during the last three years, and we intend to continue to aggressively pursue attractive opportunities to enhance or expand our offerings through acquisitions, strategic relationships, joint ventures or investments that we believe may allow us to implement our growth strategy. For example, in December 2019, we acquired ICO Mold, LLC ("ICOMold") to enable us to expand our existing Search Engine Optimization ("SEO") and Search Engine Marketing ("SEM") capabilities. During 2020 and 2021, we completed six acquisitions that added CNC machining to our manufacturing capabilities, and three acquisitions that added precision sheet metal fabrication to our offerings. We cannot forecast the number, timing or size of any future acquisitions or other similar strategic transactions, or the effect that any such transactions might have on our operating or financial results. We may not be able to successfully identify future acquisition opportunities or complete any such acquisitions if we cannot reach agreement on commercially favorable terms, if we lack sufficient resources to finance such transactions on our own and cannot obtain financing at a reasonable cost or if regulatory authorities prevent such transactions from being completed. Restrictions in the Credit Agreement (as defined in "Item7. Management's Discussion and Analysis of Financial Condition and Results of Operations - Liquidity and Capital Resources - Borrowings and Lines of Credit:) also limit our ability to complete new acquisitions.

Although we have substantial experience engaging in these types of transactions, such transactions may be complex, time consuming and expensive, and may present numerous challenges and risks including:

Any one of these challenges or risks could impair our ability to realize any benefit from our acquisitions, strategic relationships, joint ventures or investments after we have expended resources on them, as well as divert our management’s attention. Any failure to successfully address these challenges or risks could disrupt our business and harm our operating results and financial condition. Moreover, any such transaction may not be viewed favorably by investors or other stakeholders.

9

If we proceed with a particular acquisition, we may have to use cash, issue new equity securities with dilutive effects on existing stockholders, incur indebtedness, assume contingent liabilities, or amortize assets or expenses in a manner that might have a material adverse effect on our financial condition and results of operations. Acquisitions will also require us to record certain acquisition-related costs and other items as current period expenses, which would have the effect of reducing our reported earnings in the period in which an acquisition is consummated. In addition, we could also face unknown liabilities or write-offs due to our acquisitions, which could result in a significant charge to our earnings in the period in which they occur. We have recorded, and in the future will be required to record any goodwill or other long-lived asset impairment charges in the periods in which they occur, which could result in a significant charge to our earnings in any such period.

Achieving the expected returns and synergies from future acquisitions will depend, in part, upon our ability to integrate the products and services, technology, administrative functions and personnel of these businesses into our offering lines in an efficient and effective manner. We cannot assure you that we will be able to do so, that any acquired businesses will perform at levels and on the timelines anticipated by our management or that we will be able to realize these synergies. In addition, acquired technologies and intellectual property may be rendered obsolete or uneconomical by our own or our competitors’ technological advances. Management resources may also be diverted from operating our existing businesses to certain acquisition integration challenges. If we are unable to successfully integrate acquired businesses, our anticipated revenues and profits may be lower. Our profit margins may also be lower, or diluted, following the acquisition of companies whose profit margins are less than those of our existing businesses.

In addition, from time to time we may enter into negotiations for acquisitions, relationships, joint ventures or investments that are not ultimately consummated. These negotiations could result in significant diversion of management time, as well as substantial out-of-pocket costs.

If we are unable to manage our growth and expand our operations successfully, our reputation and brands may be damaged, and our business and results of operations may be harmed.

Over the past several years, we have experienced rapid growth. For example, we have grown from 44 full-time employees as of October 31, 2018 to 708 full-time employees as of December 31, 2022. Our ability to effectively manage our anticipated growth and expansion of our operations will require us to do, among other things, the following:

These enhancements and improvements will require significant capital expenditures and allocation of valuable management and employee resources. Furthermore, our growth has placed, and will continue to place, a strain on our operational, financial and management infrastructure. Our future financial performance and our ability to execute on our business plan will depend, in part, on our ability to effectively manage any future growth and expansion. There are no guarantees we will be able to do so in an efficient or timely manner, or at all. Our failure to effectively manage growth and expansion could have a material adverse effect on our business, results of operations, financial condition, prospects, reputation and brands, including impairing our ability to perform to our customers’ expectations.

10

We may not timely and effectively scale and adapt our existing technology, processes and infrastructure to meet the needs of our business.

A key element to our continued growth is the ability to quickly and efficiently quote an increasing number of customer submissions across geographic regions and to manufacture the related custom parts. This will require us to timely and effectively scale and adapt our existing technology, processes and infrastructure to meet the needs of our business. With respect to our website, project management platform and quoting technology, it may become increasingly difficult to maintain and improve their performance, especially during periods of heavy usage and as our solutions become more complex and our user traffic increases across geographic regions. Similarly, our manufacturing automation technology may not enable us to process the large numbers of unique designs and efficiently manufacture the related custom parts in a timely fashion to meet the needs of our customers as our business continues to grow. Any failure in our ability to timely and effectively scale and adapt our existing technology, processes and infrastructure could negatively impact our ability to retain existing customers and attract new customers, damage our reputation and brands, result in lost revenue, and otherwise substantially harm our business and results of operations.

The implementation of our reorganization plan could result in greater costs and fewer benefits than we anticipate, which could materially harm our business, financial condition and operating results.

On July 7, 2022, the Board approved a reorganization plan, designed to consolidate the Company’s national footprint, streamline legacy leadership and centralize core business functions following the completion of 13 acquisitions by Fathom since 2019. These measures include consolidation of leadership and other roles through a net workforce reduction of approximately 6%, consolidation of our Oakland, California facility into our Hartland, Wisconsin headquarters, the establishment of a technology center in Fremont, CA and streamlining of certain of our administrative processes. On February 17, 2023, the Company committed to additional actions to continue and expand the reorganization plan. The additional actions include closing and consolidation a location in Texas, reducing the Company’s workforce by an additional 14% and prioritizing investments and operations in line with near-term revenue generation. We expect to substantially complete this reorganization plan by the first half of fiscal year 2023, but the process to complete these reorganization initiatives could take more time, and could be more costly than anticipated. In addition, these initiatives have placed and could place substantial additional demands on our management, which could lead to the diversion of management’s attention from other business priorities. These initiatives could also lead to unanticipated work stoppages, low employee morale, decreased productivity, and a failure to deliver under existing and future commitments to third parties, which could harm our business. As a result of these or any other factors, we could fail to realize the anticipated benefits associated with the reorganization initiatives, which could in turn materially harm our business, financial condition and operating results.

We may require additional capital to support business growth, and this capital might not be available on acceptable terms, if at all. If we are unable to raise additional capital when needed, our financial condition could be adversely affected and we may not be able to execute our growth strategy.

We intend to continue to make acquisitions and other investments to support our business growth and may require additional funds to respond to business challenges, including the need to complement our growth strategy, increase market share in our current markets or expand into other markets, or broaden our technology, intellectual property or manufacturing capabilities. Accordingly, we may need to obtain equity or debt financings to secure additional funds. If we raise additional funds through future issuances of equity or convertible debt securities, our existing stockholders could suffer significant dilution, and any new equity securities we issue could have rights, preferences and privileges superior to those of holders of our common stock. The Credit Agreement and any debt financing we secure in the future could involve restrictive covenants relating to our capital raising activities and other financial and operational matters, which may make it more difficult for us to obtain additional capital and to pursue business opportunities, including potential acquisitions. In addition, we may not be able to obtain additional financing on terms favorable to us, if at all. If we are unable to obtain adequate financing or financing on terms satisfactory to us when we require it, our ability to continue to support our business growth and to respond to business challenges could be significantly impaired, and our business may be adversely affected.

11

Numerous factors may cause us not to maintain the revenue growth that we have historically experienced.

Although our revenue has grown from $20.6 million for the year ended December 31, 2019 to $161.1 million for the year ended December 31, 2022, we may not be able to maintain our historical rate of revenue growth. We believe that our future revenue growth will depend on many factors, a number of which are out of our control, including among others, our ability to:

We cannot assure you that we will be successful in addressing the factors described above and continuing to grow our business and revenue.

Errors or defects in the software we use or custom parts we manufacture could cause us to incur additional costs, lose revenue and business opportunities, damage our reputation and expose us to potential liability.

The sophisticated software we use and the often complex custom parts we manufacture may contain errors, defects or other performance problems at any point in the life of the software or custom parts. If errors or defects are discovered in our current or future software or in the custom parts we manufacture for customers, we may not be able to correct them in a timely manner or provide an adequate response to our customers. We may therefore need to expend significant financial, technical and management resources, or divert some of our development resources, in order to resolve or work around those errors or defects. Particularly in the medical sector, errors or defects in our software or custom parts we manufacture could lead to claims by patients against us and our customers and expose us to lawsuits that may damage our and our customers’ reputations. Claims may be made by individuals or by classes of users. Our product liability and related insurance policies may not apply or sufficiently cover any product liability lawsuit that arises from defective software we may use or the custom parts we manufacture. Customers such as our collaboration partners may also seek indemnification for third party claims allegedly arising from breaches of warranties under our collaboration agreements.

Errors, defects, or other performance problems in the software we use or custom parts we manufacture may also result in the loss of, or delay in, the market acceptance of our platform and digital manufacturing capabilities. Such difficulties could also cause us to lose customers and, particularly in the case of our largest customers, the potentially substantial associated revenue which would have been generated by our sales to companies participating in our customer supply chains. Technical problems, or the loss of a customer with a particularly important national or global reputation, could also damage our own business reputation and cause us to lose new business opportunities.

12

Interruptions to or other problems with our website, project management platform, information technology systems, manufacturing processes or other operations could damage our reputation and brands and substantially harm our business and results of operations.

The satisfactory performance, reliability, consistency, security and availability of our website and interactive project management platform, information technology systems, manufacturing processes and other operations are critical to our reputation and brands, and to our ability to effectively service customers. Any interruptions or other problems that cause any of our website, interactive project management platform or information technology systems to malfunction or be unavailable, or negatively impact our manufacturing processes or other operations, may damage our reputation and brands, result in lost revenue, cause us to incur significant costs seeking to remedy the problem and otherwise substantially harm our business and results of operations.

A number of factors or events could cause such interruptions or problems, including among others: human and software errors, design faults, challenges associated with upgrades, changes or new facets of our business, power loss, telecommunication failures, fire, flood, extreme weather, political instability, acts of terrorism, war, break-ins and security breaches, contract disputes, labor strikes and other workforce-related issues, capacity constraints due to an unusually large number of customers and potential customers accessing our website or project management platform or ordering parts at the same time, and other similar events. These risks are augmented by the fact that our customers come to us largely for our quick-turn low to mid-volume manufacturing capabilities and that accessibility and turnaround speed are often of critical importance to these customers. We are dependent upon our facilities through which we satisfy all of our production demands and in which we house all of the computer hardware necessary to operate our website and systems as well as managerial, customer service, sales, marketing and other similar functions, and we have not identified alternatives to these facilities or established fully redundant systems in multiple locations. In addition, we are dependent in part on third parties for the implementation and maintenance of certain aspects of our communications and production systems, and therefore preventing, identifying and rectifying problems with these aspects of our systems is to a large extent outside of our control.

Moreover, the business interruption insurance that we carry may not be sufficient to compensate us for the potentially significant losses, including the potential harm to the future growth of our business that may result from interruptions in our offerings and manufacturing processes as a result of system failures.

If a natural or man-made disaster strikes any of our manufacturing facilities, we may be unable to manufacture our products for a substantial period of time and our sales will decline.

We manufacture the majority of our products in 12 manufacturing facilities located in the U.S. and the rest is manufactured through our supply chain partners. These facilities and the manufacturing equipment we use would be costly to replace if damaged by a natural or man-made disaster, and could require substantial lead time to repair or replace. Our facilities may be harmed by natural or man-made disasters, including, without limitation, earthquakes, floods, tornadoes, fires, hurricanes, tsunamis, nuclear disasters, terrorist attacks, or as a result of the ongoing COVID-19 pandemic. In the event any of our facilities are affected by a disaster, we may:

Although we possess insurance for damage to our property and the disruption of our business from casualties, this insurance may not be sufficient to cover all of our potential losses and may not continue to be available to us on acceptable terms, or at all.

13

If our present single or limited source suppliers become unavailable or inadequate, our customer relationships, results of operations and financial condition may be adversely affected.

We acquire substantially all of the manufacturing equipment and certain of our materials that are critical to the ongoing operation and future growth of our business from third parties. We do not have long-term supply contracts with any of our suppliers and operate on a purchase-order basis. While most manufacturing equipment and materials for our products are available from multiple suppliers, certain of those items are only available from single or limited sources. Should any of our present single or limited source suppliers for manufacturing equipment or materials become unavailable or inadequate, or impose terms unacceptable to us such as increased pricing terms, we could be required to spend a significant amount of time and expense to develop alternate sources of supply, and we may not be successful in doing so on terms acceptable to us, or at all. Natural disasters, such as hurricanes or tornadoes, may affect our supply of materials, particularly resins, from time to time, and we may purchase larger amounts of certain materials in anticipation of future shortages or increases in pricing. In addition, if we were unable to find a suitable supplier for a particular type of manufacturing equipment or material, we could be required to modify our existing manufacturing processes and offerings to accommodate the situation. As a result, the loss of a single or limited source supplier could adversely affect our relationship with our customers and our results of operations and financial condition.

We are subject to payment-related risks.

We accept payments using a variety of methods, including credit card, customer invoicing, physical bank check and payment upon delivery. As we offer new payment options to our customers, we may be subject to additional regulations, compliance requirements and fraud risk. For certain payment methods, including credit and debit cards, we pay interchange and other fees, which may increase over time and raise our operating costs and lower profitability. We rely on third parties to provide payment processing services, including the processing of credit cards, debit cards or electronic checks, and it could disrupt our business if these companies become unwilling or unable to provide these services to us. We are also subject to payment card association operating rules, certification requirements and rules governing electronic funds transfers, which could change or be reinterpreted to make it difficult or impossible for us to comply. If we fail to comply with these rules or requirements, we may be subject to fines and higher transaction fees and lose our ability to accept credit and debit card payments from our customers, process electronic funds transfers, or facilitate other types of online payments, and our business and operating results could be adversely affected.

Workplace accidents or environmental damage could result in substantial remedial obligations and damage to our reputation.

Accidents or other incidents that occur at our manufacturing and other facilities or involve our personnel or operations could result in claims for damages against us. In addition, in the event we are found to be financially responsible, as a result of environmental or other laws or by court order, for environmental damages alleged to have been caused by us or occurring on our premises, we could be required to pay substantial monetary damages or undertake expensive remedial obligations. The amount of any costs, including fines or damages payments that we might incur under such circumstances, could substantially exceed any insurance we have to cover such losses. Any of these events, alone or in combination, could have a material adverse effect on our business, financial condition and results of operations and could adversely affect our reputation.

Interruptions, delays in service or inability to increase capacity at third-party data center facilities could adversely affect our business and reputation.

Our business, brands, reputation, and ability to attract and retain customers depend upon the satisfactory performance, reliability and availability of our project management platform, and depend upon the availability of the internet and our third-party service providers. We rely on third party data center facilities operated by Amazon Web Services (“AWS”), Ace Cloud Hosting (“Ace”), and Right Networks (“Right Networks”) to host our main servers. We do not control the operation of any of AWS, Ace’s, or Right Networks’ data center hosting facilities, and they may be subject to damage or interruption from earthquakes, floods, fires, power loss, telecommunications failures, terrorist attacks and similar events. They may also be subject to interruptions due to system failures, computer viruses, software errors or subject to breaches of computer hardware and software security, break-ins, sabotage, intentional acts of vandalism and similar misconduct. And while we rely on service level agreements with our hosting providers, if they do not properly maintain their infrastructure or if they incur unplanned outages, our customers may experience performance issues or unexpected interruptions and we may not meet our service level agreement terms with our customers. We have experienced, and expect that in the future we may experience interruptions, delays and outages in service and availability from time to time due to a variety of factors, including infrastructure changes, human or software errors, website hosting disruptions and capacity constraints. These and other similar events beyond our control could negatively affect the use, functionality or availability of our services.

14

Any damage to, or failure of, our systems, or those of our third-party providers, could interrupt or hinder the use or functionality of our website or project management platform. Resulting impairment of or interruptions of our business may reduce revenue, subject us to claims and litigation, cause customers to terminate their contracts and adversely affect our ability to attract new customers. If we are forced to switch hosting facilities for our main servers, we may not be successful in finding an alternative service provider on acceptable terms or in hosting the computer servers ourselves. Our business will also be harmed if customers and potential customers believe our systems are unreliable.

We are subject to risks related to corporate social responsibility.

We and our offerings face increasing public scrutiny related to environmental, social and governance (“ESG”) activities, including diversity and inclusion, environmental stewardship, support for local communities, corporate governance, and transparency. Before making an investment on behalf of our products, we analyze a wide array of considerations, risks, and potential rewards related to the prospective investment. Among the pecuniary considerations we analyze are the present and future material ESG implications of investments. It is expected that investor demands and the prevailing legal environment will require us to spend additional resources and place increasing importance on ESG matters in our review of prospective investments and management of existing ones. Devoting additional resources to ESG matters could increase the amount of expenses we or our businesses are required to bear. Further, emphasis on ESG criteria in evaluating an investment by us or our offerings and products could lead to reduced profits.

ESG matters have been the subject of increased focus by certain U.S. regulators, among others. As a result of this regulatory focus and any related legislative and regulatory initiatives, we may be required to provide additional disclosure with respect to ESG matters. This exposes us to increased disclosure risks, for example due to a lack of available or credible data, and the potential for conflicting disclosures may also expose us to an increased risk of misstatement litigation or miss-selling allegations. Failure to manage these risks could result in a material adverse effect on our business in a number of ways.

Climate change, or legal, regulatory or market measures to address climate change, may materially adversely affect our financial condition and business operations.

There is evidence of global climate change, which could present risks to our future operations from natural disasters and extreme weather conditions, such as hurricanes, tornadoes, earthquakes, wildfires, or flooding. Such extreme weather conditions could pose physical risks to our facilities and disrupt operation of our supply chain and our customers and may increase operational costs. Concern over climate change will likely result in new legal or regulatory requirements designed to identify or mitigate the effects of climate change on the environment. For example, in the U.S., the SEC is actively engaged in climate-related rulemaking. These proposed rules, depending on how they are finally adopted, as well as other changes the government might implement, could impose significant new burdens on us and our suppliers, with significant costs and operational impacts, and adversely impact our ability to win business and operate successfully. If such laws or regulations are more stringent than current legal or regulatory requirements, we may experience increased compliance burdens and costs to meet the regulatory obligations, and raw material sourcing, manufacturing operations and the distribution of our products may be affected.

Industry Risks

We face various risks related to health epidemics, pandemics and similar outbreaks, which may have material adverse effects on our business, financial position, results of operations and/or cash flows.

We face a wide variety of risks related to health epidemics, pandemics and similar outbreaks, especially of infectious diseases, including COVID-19. Since first reported in late 2019, the COVID-19 pandemic has dramatically impacted the global health and economic environment, including millions of confirmed cases and deaths, business slowdowns or shutdowns, labor shortages, supply chain challenges, changes in industrial product development spending, regulatory challenges, inflationary pressures and market volatility. As discussed in our prior and current Form 10-K and 10-Q filings, our operations have been and we expect will continue to be impacted by the COVID-19 pandemic and its related economic challenges. However, we have worked hard to address and mitigate adverse impacts from COVID-19, and we do not currently anticipate significant additional direct impacts from the pandemic itself on our operations. Nonetheless, we cannot predict the future course of events.

If, for example, the COVID-19 pandemic worsens, due to spread, new or additional variants, or if a new health epidemic or outbreak were to occur, we likely would experience broad and varied impacts, including potentially to our workforce and supply chain, with inflationary pressures and increased costs (which may or may not be fully recoverable or insured), schedule or production delays, market volatility and other financial impacts. If any or all of these events were to occur, we could experience adverse impacts on our overall performance, operations and financial results. Given the tremendous uncertainties and variables, we cannot at this time predict the impact of the global COVID-19 pandemic, or any future health epidemics, pandemics, or similar outbreaks, but any one of such events could have a material adverse effect on our business, financial position, results of operations and/or cash flows.

15

If demand for our offerings and manufacturing capabilities does not grow as expected, or if market adoption of digital manufacturing does not continue to develop, or develops more slowly than expected, our revenues may stagnate or decline and our business may be adversely affected.

The industrial manufacturing market, which today is dominated by conventional manufacturing processes that do not involve digital manufacturing technology, is undergoing a shift towards digital manufacturing. We may not be able to develop effective strategies to raise awareness among potential customers of the benefits of digital manufacturing technologies or our offerings and manufacturing capabilities may not address the specific needs or provide the level of functionality required by potential customers to encourage the continuation of this shift towards digital manufacturing. If digital manufacturing technology does not continue to gain broader market acceptance as an alternative to conventional manufacturing processes, or if the marketplace adopts digital manufacturing technologies and capacities developed by our competitors, we may not be able to increase or sustain the level of sales of our offerings and our operating results would be adversely affected as a result.

We could face liability if our digital manufacturing solutions are used by our customers to print dangerous objects.

Customers may use our digital manufacturing offerings to produce parts that could be used in a harmful way or could otherwise be dangerous. For example, there have been news reports that 3D printers were used to print guns or other weapons. We have little, if any, control, or knowledge over the parts we manufacture for our customers using our offerings, and it may be difficult, if not impossible, for us to monitor and prevent customers from having certain components of weapons or other dangerous objects manufactured with our services. While we have never digitally manufactured weapons for customers, there can be no assurance that we will not be held liable if someone were injured or killed by a weapon or other dangerous object containing a component part or parts manufactured for a customer using one of our offerings.

Because the digital manufacturing market is rapidly evolving, forecasts of market growth may not be accurate.

Market opportunity estimates and growth forecasts included in this Annual Report on Form 10-K are subject to significant uncertainty and are based on assumptions and estimates that may not prove to be accurate. The forecasts and estimates in this Annual Report on Form 10-K relating to the expected size and growth of the markets for digital manufacturing technology and other markets in which we participate may prove to be inaccurate. Even if these markets experience the forecasted growth described in this Annual Report on Form 10-K, we may not grow our business at similar rates, or at all. Our future growth is subject to many factors, including continued market adoption of our offerings, which is subject to many risks and uncertainties. Accordingly, the forecasts and estimates of market size and growth described in this Annual Report on Form 10-K should not be taken as indicative of our future growth. In addition, these forecasts do not consider the impact of the ongoing global COVID-19 pandemic, and we cannot assure you that these forecasts will not be materially and adversely affected as a result.

Unfavorable global economic conditions and changes, including changes in inflation, interest rates and geopolitical matters, could adversely affect our business, financial condition, or results of operations.

Heightened levels of inflation and the potential worsening of macroeconomic conditions, including slower growth or recession, further changes to federal government fiscal or monetary policies, tighter credit and higher interest rates, present risks for us, our suppliers and the stability of the broader manufacturing industrial base. We have experienced pricing increases from our suppliers and we have increased compensation to our employees to help ensure employee retention. To the extent inflation or other factors increase our business costs, it may not be feasible to pass price increases on to our customers or offset higher costs through manufacturing efficiencies. Inflation could also adversely affect the ability of our customers to purchase our products and higher interest rates could adversely affect the ability of our customers to invest in product innovation and development that generate demand for our custom parts. An economic downturn could result in a variety of risks to our business, including weakened demand for our products and our inability to raise additional capital when needed on acceptable terms, if at all. A weak or declining economy could also result in further constraints on our suppliers or cause future customers to delay making payments for our products. Any of the foregoing could harm our business and we cannot anticipate all of the ways in which the current economic climate and financial market conditions could adversely impact our business.

In addition, the ongoing trade war between the U.S. and China may impact the cost of raw materials, finished products or other materials used in our offerings and our ability to sell our offerings in China. Overall, the U.S.-China trade relationship remains stalled as economic and national security concerns continue to be a challenge. Other changes in U.S. social, political, regulatory, and economic conditions or in laws and policies governing foreign trade, manufacturing, development and investment could also adversely affect our business. We could experience interruptions in production due to the processing of customs formalities or reduced customer spending in the wake of weaker economic performance. If global economic conditions remain volatile for a prolonged period our results of operations could be adversely affected.

16

Intellectual Property and Infrastructure-Related Risks

We may not be able to adequately protect or enforce our intellectual property rights, which could impair our competitive position.

Our success and future revenue growth will depend, in part, on our ability to protect our intellectual property. We rely primarily on patents, licenses, trademarks, and trade secrets, as well as non-disclosure agreements and other methods, to protect our proprietary technologies and processes globally. Despite our efforts to protect our proprietary technologies and processes, it is possible that competitors or other unauthorized third parties may obtain, copy, use or disclose our technologies and processes. We cannot assure you that any of our existing or future patents will not be challenged or invalidated in court or patent office proceedings that could be time-consuming, expensive and distract us from operating our business. In addition, competitors could circumvent our patents by inventing around them. As such, any rights granted under these patents may not provide us with meaningful protection. We may not be able to obtain foreign patents corresponding to our U.S. patents. Even if foreign patents are granted, effective enforcement in foreign countries may not be available. If our patents and other intellectual property do not adequately protect our proprietary technology, our competitors may be able to offer product lines similar to ours. Our competitors may also be able to develop similar technology independently or design around our patents. Any of the foregoing events would lead to increased competition and lower our revenue or gross margin, which would adversely affect our net income.

We may incur substantial costs enforcing or acquiring intellectual property rights and defending against third-party claims as a result of litigation or other proceedings. Our failure to expand our intellectual property portfolio could adversely affect the growth of our business and results of operations.

We may incur substantial expense and costs in protecting, enforcing and defending our intellectual property rights against third parties. Intellectual property disputes may be costly and can be disruptive to our business operations by diverting attention and energies of management and key technical personnel and by increasing our costs of doing business. Third-party intellectual property claims asserted against us could subject us to significant liabilities, require us to enter into royalty and licensing arrangements on unfavorable terms, prevent us from providing our offerings to customers, subject us to injunctions prohibiting or restricting our sale of our offerings, or require us to redesign our offerings, causing severe disruptions to our operations or the marketplaces in which we compete or require us to satisfy indemnification commitments with our customers, including contractual provisions under various license arrangements. In addition, we may incur significant costs in acquiring the necessary third-party intellectual property rights for use in our offerings. Any of these could have an adverse effect on our business and financial condition.

Patent applications in the U.S and most other countries are confidential for a period of time until they are published, and the publication of discoveries in scientific or patent literature typically lags actual discoveries by several months or more. As a result, the nature of claims contained in unpublished patent filings around the world is unknown to us, and we cannot be certain that we were the first to conceive inventions covered by our patents or patent applications or that we were the first to file patent applications covering such inventions. Furthermore, it is not possible to know in which countries patent holders may choose to extend their filings under the Patent Cooperation Treaty or other mechanisms.

In addition, we may be subject to intellectual property infringement claims from individuals, vendors and other parties, including those that are in the business of asserting patents, but are not commercializing products or services in the field of digital manufacturing, or our customers may seek to invoke indemnification obligations to involve us in such intellectual property infringement claims. Furthermore, although we maintain certain procedures to screen custom parts we manufacture on behalf of customers for infringement on the intellectual property rights of others, we cannot be certain that our procedures will be effective in preventing any such infringement. Any third-party lawsuits or other assertion to which we are subject, alleging infringement of trademarks, patents, trade secrets or other intellectual property rights either by us or by our customers may have a significant adverse effect on our financial condition.

Cybersecurity risks and cyber incidents, including cyber-attacks, could adversely affect our business by causing a disruption to our operations, a compromise or corruption of our confidential information and confidential information in our possession and damage to our business relationships, any of which could negatively impact our business, financial condition and operating results.

There has been an increase in the frequency and sophistication of the cyber and security threats we face, with attacks ranging from those common to businesses generally to those that are more advanced and persistent, which may target us due to our substantial reliance on information technology. Cyber-attacks and other security threats could originate from a wide variety of sources, including cyber criminals, nation state hackers, hacktivists and other outside parties. As a result of the generally increasing frequency and sophistication of cyber-attacks, and our substantial reliance on technology, we may face a heightened risk of a security breach or disruption with respect to sensitive information resulting from an attack by computer hackers, foreign governments or cyber terrorists.

17

The operation of our business is dependent on computer hardware and software systems, as well as data processing systems and the secure processing, storage and transmission of information, which are vulnerable to security breaches and cyber incidents. A cyber incident is considered to be any adverse event that threatens the confidentiality, integrity or availability of our information resources. These incidents may be an intentional attack or an unintentional event and could involve gaining unauthorized access to our information systems for purposes of misappropriating assets, stealing confidential information, corrupting data or causing operational disruption. In addition, we and our employees may be the target of fraudulent emails or other targeted attempts to gain unauthorized access to proprietary or other sensitive information. The result of these incidents may include disrupted operations, misstated or unreliable financial data, fraudulent transfers or requests for transfers of money, liability for stolen information, increased cybersecurity protection and insurance costs, litigation and damage to our business relationships, causing our business and results of operations to suffer. Our reliance on information technology is substantial, and accordingly the risks posed to our information systems, both internal and those provided by third-party service providers are critical. We have implemented processes, procedures and internal controls designed to mitigate cybersecurity risks and cyber intrusions and rely on industry accepted security measures and technology to securely maintain confidential and proprietary information maintained on our information systems; however, these measures, as well as our increased awareness of the nature and extent of a risk of a cyber-incident, do not guarantee that a cyber-incident will not occur and/or that our financial results, operations or confidential information will not be negatively impacted by such an incident, especially because the cyber-incident techniques change frequently or are not recognized until launched and because cyber-incidents can originate from a wide variety of sources.

Those risks are exacerbated by the rapidly increasing volume of highly sensitive data, including our and our customers’ proprietary business information and intellectual property, and personally identifiable information of our employees and customers, that we collect and store in our data centers and on our networks. The secure processing, maintenance and transmission of this information are critical to our operations. A significant actual or potential theft, loss, corruption, exposure, fraudulent use or misuse of employee, customer or other personally identifiable or our or our customers’ proprietary business data, whether by third parties or as a result of employee malfeasance (or the negligence or malfeasance of third party service providers that have access to such confidential information) or otherwise, non-compliance with our contractual or other legal obligations regarding such data or intellectual property or a violation of our privacy and security policies with respect to such data could result in significant remediation and other costs, fines, litigation or regulatory actions against us and significant reputational harm.

Our proprietary digital manufacturing software contains third-party open source software components. Our use of such open source software may expose us to additional risks and harm our intellectual property and failure to comply with the terms of the underlying open source software licenses could restrict our ability to sell our offerings.

Our proprietary digital manufacturing software contains components that are licensed under so-called “open source,” “free” or other similar licenses. Open source software is made available to the general public on an “as-is” basis under the terms of a non-negotiable license. We currently combine our proprietary software with open source software, but not in a manner that we believe requires the release of the source code of our proprietary software to the public. We do not plan to integrate our proprietary software with open source software in ways that would require the release of the source code of our proprietary software to the public; however, our use of open source software may entail greater risks than use of third-party commercial software. Open source licensors generally do not provide warranties or other contractual protections regarding infringement claims or the quality of the code. In addition, if we combine our proprietary software with open source software in a certain manner, we could, under certain open source licenses, be required to release to the public or remove the source code of our proprietary software. As is standard practice among technology companies, Fathom leverages open source software in the development of its internal software. Open source software is commonly used as a foundation to which Fathom develops upon, allowing us to customize the software based on the specific needs of Fathom. This approach enables faster development of high quality software. We may also face claims alleging noncompliance with open source license terms or infringement or misappropriation of proprietary software. These claims could result in litigation, require us to purchase a costly license or remove the open source software. In addition, if the license terms for open source software that we use change, we may be forced to re-engineer our solutions, incur additional costs, or discontinue the sale of certain of our offerings if re-engineering could not be accomplished on a timely basis. Although we monitor our use of open source software to avoid subjecting our offerings to unintended conditions, there is a risk that these licenses could be construed in a way that could impose unanticipated conditions or restrictions on our ability to commercialize our offerings. We cannot guarantee that we have incorporated open source software in our proprietary software in a manner that will not subject us to liability or in a manner that is consistent with our current policies and procedures.

18

Compliance-Related Risks

Government regulation of the Internet and e-commerce is evolving, and unfavorable changes or failure by us to comply with these regulations could substantially harm our business and results of operations.

We are subject to general business regulations and laws as well as regulations and laws specifically governing the Internet and e-commerce. Existing and future laws and regulations may impede the growth of the Internet or other online services. These regulations and laws may cover taxation, restrictions on imports and exports, customs, tariffs, user privacy, data protection, pricing, content, copyrights, distribution, electronic contracts and other communications, consumer protection, the provision of online payment services, broadband residential Internet access and the characteristics and quality of the types of custom parts we manufacture or may manufacture in the future. It is not clear how existing laws governing issues such as property use and ownership, sales and other taxes, fraud, libel and personal privacy apply to the Internet and e-commerce, especially where these laws were adopted prior to the advent of the Internet and do not contemplate or address the unique issues raised by the Internet or e-commerce. Those laws that do reference the Internet are being interpreted by the courts and their applicability and reach are therefore uncertain. The costs of compliance with these regulations may increase in the future as a result of changes in the regulations or the interpretation of them. Further, any failures on our part to comply with these regulations may subject us to significant liabilities. Those current and future laws and regulations or unfavorable resolution of these issues may substantially harm our business and results of operations.

Aspects of our business are subject to privacy, data use and data security regulations, which may impact the way we use data to target customers.

Privacy and security laws and regulations may limit the use and disclosure of certain information and require us to adopt certain cybersecurity and data handling practices that may affect our ability to effectively market our manufacturing capabilities to current, past or prospective customers. In many jurisdictions consumers must be notified in the event of a data security breach, and such notification requirements continue to increase in scope and cost. The changing privacy laws in the U.S., Europe and elsewhere, including the General Data Protection Regulation ("GDPR") in the European Union, which became effective May 25, 2018, and the California Consumer Privacy Act of 2018, which was enacted on June 28, 2018 and became effective on January 1, 2020, create new individual privacy rights and impose increased obligations, including disclosure obligations, on companies handling personal data. The impact of these continuously evolving laws and regulations could have a material adverse effect on the way we use data to digitally market and pursue our customers.

Our business involves the use of hazardous materials, and we and our suppliers must comply with environmental, health and safety laws and regulations, which can be expensive and restrict how we do business.

Our business involves the controlled storage, use and disposal of hazardous materials. We and our suppliers are subject to federal, state and local laws and regulations governing the use, manufacture, storage, handling and disposal of these hazardous materials. Although we believe that the safety procedures utilized by us and our suppliers for handling and disposing of these materials comply with the standards prescribed by these laws and regulations, we cannot eliminate the risk of accidental contamination or injury from these materials. In the event of an accident, federal, state or local authorities may curtail our use of these materials and interrupt our business operations. We do not currently maintain hazardous materials insurance coverage. If we are subject to any liability as a result of activities involving hazardous materials, our business and financial condition may be adversely affected and our reputation and brands may be harmed.

If we are unable to meet regulatory quality standards applicable to our manufacturing and quality processes for the parts we manufacture, our business, financial condition or operating results could be harmed.

As a manufacturer of CNC-machined and injection-molded custom parts, we conform to certain international standards, including International Organization for Standardization ("ISO"), 9001:2015 for our injection molding facilities and the AS9100:2016 standard for our CNC-machining facilities in Hartland, WI, Pflugerville, TX, Tempe, AZ, Newark, NY. We conform to the ISO 9001:2015 standard for our plastics manufacturing and the AS9100:2016 standard for our metals manufacturing in Hartland, WI, Pflugerville, TX, Tempe, AZ, and Newark, NY. We conform to the ISO 9001:2015 for our sheet metal custom parts and the AS9100:2016 standards for our CNC-machined custom parts in Hartland, WI, Pflugerville, TX, Tempe, AZ, and Newark, NY. We also conform to international standard ISO 9001:2015 at our manufacturing facilities in Hartland, WI, Newark, NY, Pflugerville, TX, Denver, CO, Round Rock, TX, Tempe, AZ, Miami Lakes, FL, and Elk Grove, IL. We conform to the NIST800-171 standard at our facilities in Oakland, CA and Tempe, AZ. We conform to the ITAR standard at our facilities in Hartland, WI, Ithaca, NY, Denver, CO, Tempe, AZ, and Newark, NY. Additionally, we conform to international standard ISO 13485 at our manufacturing facilities in Round Rock, TX and Miami Lakes, FL. If any system inspection reveals that we are not in compliance with applicable standards, regulators may take action against us, including issuing a corrective action request or discontinuing our certifications. If any of these actions were to occur, it could harm our reputation as well as our business, financial condition and operating results.

19

We are subject to environmental, health and safety laws and regulations related to our operations and the use of our digital manufacturing systems and consumable materials, which could subject us to compliance costs and/or potential liability in the event of non-compliance.

We are subject to environmental laws and regulations governing our manufacturing operations, including, but not limited to, emissions into the air and water and the use, handling, disposal and remediation of hazardous substances. A certain risk of environmental liability is inherent in our production activities. These laws and regulations govern, among other things, the generation, use, storage, registration, handling and disposal of chemicals and waste materials, the emission and discharge of hazardous materials into the ground, air or water, the cleanup of contaminated sites, including any contamination that results from spills due to our failure to properly dispose of chemicals and other waste materials, and the health and safety of our employees. Under these laws, regulations and requirements, we could also be subject to liability for improper disposal of chemicals and waste materials. Accidents or other incidents that occur at our facilities or involve our personnel or operations could result in claims for damages against us. In the event we are found to be financially responsible, as a result of environmental or other laws or by court order, for environmental damages alleged to have been caused by us or occurring on our premises, we could be required to pay substantial monetary damages or undertake extensive remedial obligations. If our operations fail to comply with such laws or regulations, we may be subject to fines and other civil, administrative or criminal sanctions, including the revocation of permits and licenses necessary to continue our business activities. In addition, we may be required to pay damages or civil judgments in respect of third-party claims, including those relating to personal injury (including exposure to hazardous substances that we generate, use, store, handle, transport, manufacture or dispose of), property damage or contribution claims. Some environmental laws allow for strict and joint and several liabilities for remediation costs, regardless of fault. We may be identified as a potentially responsible party under such laws. The amount of any costs, including fines or damages payments that we might incur under such circumstances, could substantially exceed any insurance we have to cover such losses. Any of these events, alone or in combination, could have a material adverse effect on our business, financial condition and results of operations and could adversely affect our reputation.

The cost of complying with current and future environmental, health and safety laws applicable to our operations, or the liabilities arising from past releases of, or exposure to, hazardous substances, may result in future expenditures. Any of these developments, alone or in combination, could have an adverse effect on our business, financial condition, and results of operations.

We are subject to anti-corruption laws, trade controls, economic sanctions and similar laws and regulations. Our failure to comply with these laws and regulations could subject us to civil, criminal, and administrative penalties and harm our reputation.

We service customers located in a number of countries. Doing business with foreign customers subjects us to U.S. and other anti-corruption laws and regulations imposed by governments around the world with jurisdiction over such commerce with foreign customers, including the U.S. Foreign Corrupt Practices Act and the U.K. Bribery Act 2010, as well as the laws of the countries where we do business. Failure to comply with these anti-corruption laws and regulations could subject us to civil, criminal, and administrative penalties and harm our reputation. We are also subject to various U.S., international, and regional trade laws, including trade and economic sanctions and export controls, imposed by governments around the world with jurisdiction over our commerce with foreign customers. We are also subject to embargoes, sanctions, and trade and export controls imposed by the U.S. and other governments restricting or prohibiting sales to or transactions with specific persons or jurisdictions or the provision of certain items, based on their classification, to certain jurisdictions or persons or for certain end use purposes. Failure to comply with these embargoes, sanctions, and trade and export controls could subject us to civil, criminal, and administrative penalties and harm our reputation. These embargoes, sanctions, and trade and export controls can change rapidly with little to no notice, and therefore, our current and future offerings could become subject to heightened restrictions, which could increase our compliance costs and our risks of potential non-compliance in these areas.

Risks of Being a Public Company

Our management team has limited experience managing a public company.

Most members of our management team have limited experience managing a publicly traded company, interacting with public company investors and complying with the increasingly complex laws pertaining to public companies. Our management team may not successfully or efficiently manage being a public company that is subject to significant regulatory oversight and reporting obligations under the federal securities laws and the continuous scrutiny of securities analysts and investors. These new obligations and constituents will require significant attention from our senior management and could divert their attention away from the day-to-day management of our business, which could harm our business, results of operations and financial condition.

20

The requirements of being a public company may strain our resources, divert management’s attention and affect its ability to attract and retain qualified board members.

As a public company listed in the U.S., we are subject to the reporting requirements of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), the Sarbanes-Oxley Act of 2002 (the “Sarbanes-Oxley Act”) and any rules promulgated thereunder, as well as the rules of The New York Stock Exchange ("NYSE"). The requirements of these rules and regulations increase our legal and financial compliance costs, make some activities more difficult, time-consuming or costly, and increase demand on its systems and resources. The Sarbanes-Oxley Act requires, among other things, that we maintain effective disclosure controls and procedures and internal controls for financial reporting. In order to maintain and, if required, improve our disclosure controls and procedures and internal control over financial reporting to meet this standard, significant resources and management oversight will be required and, as a result, management’s attention may be diverted from other business concerns. These rules and regulations can also make it more difficult for us to attract and retain qualified independent members of our board of directors. Additionally, these rules and regulations make it more difficult and more expensive for us to obtain director and officer liability insurance. We may be required to accept reduced coverage or incur substantially higher costs to obtain coverage. The increased costs of compliance with public company reporting requirements and our potential failure to satisfy these requirements could have a material adverse effect on our operations, business, financial condition or results of operations.

We have identified material weaknesses in our internal control over financial reporting, resulting from pervasive control deficiencies in our process level controls. Failure to achieve and maintain effective internal control over financial reporting could result in our failure to accurately or timely report our financial condition or results of operations, which could have a material adverse effect on our business and stock price.

We are required to comply with the SEC rules implementing Sections 302 and 404 of the Sarbanes-Oxley Act, which require management to certify financial and other information in our quarterly and annual reports and provide an annual management report on the effectiveness of our controls over financial reporting. Although we are required to disclose changes made in our internal controls and procedures on a quarterly basis, we were not required to make our first annual assessment of our internal controls over financial reporting pursuant to Section 404 until this Annual Report on Form 10-K for the fiscal year ending December 31, 2022. This assessment includes disclosure of certain material weaknesses identified by our management in our internal control over financial reporting. Our independent registered public accounting firm will not be required to attest to the effectiveness of our internal control over financial reporting until our first annual report required to be filed with the SEC, following the later of the date we are deemed to be an “accelerated filer” or a “large accelerated filer,” each as defined in the Exchange Act, or the date we are no longer an emerging growth company, as defined in the Jumpstart Our Business Startups Act of 2012 ("JOBS") Act.

As previously disclosed in our Quarterly Reports on Form 10-Q filed with the SEC during 2022, we identified material weaknesses in our internal control over financial reporting. During 2022 we implemented remediation measures related to the previously disclosed material weaknesses and concluded that these have been remediated.

As of December 31, 2022, based on the Company’s implementation of a structured internal controls design and testing process during 2022, we have identified material weaknesses in certain components of the 2013 COSO framework, including the control environment and control activities.

21

A “material weakness” is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our consolidated financial statements will not be prevented or detected on a timely basis.

The Company has a remediation plan for the identified material weaknesses that will dedicate resources and priority to accounting and finance reporting controls over revenue, expenditures, income taxes, and inventory.

The remediation actions are subject to ongoing senior management review, as well as Audit Committee oversight. The Company will not be able to conclude whether the steps to be taken will fully remediate the material weaknesses in internal controls over financial reporting until remediation efforts are completed, tested, and evaluated for effectiveness. Until these weaknesses are remediated, the Company plans to continue to perform additional analyses and other mitigating procedures to ensure that the consolidated financial statements are prepared in accordance with U.S. GAAP.

The CORE Investors have substantial influence over our management and policies, and their interests may conflict with ours or yours in the future.

CORE Industrial Partners Fund I, L.P. and CORE Industrial Partners Fund I Parallel, L.P. (the "CORE Investors") beneficially own approximately 63.1% of our Class A common stock and Class B common stock, which generally vote together as a single class on matters submitted to a vote of our stockholders, including the election of directors. As a result, the CORE Investors have the ability to influence our business and affairs through their ability to control matters generally submitted to our stockholders for approval, including the election of directors, “negative control” rights through their ownership of our common stock combined with certain supermajority voting provisions of our certificate of incorporation (our "Charter") and amended and restated bylaws (our "Bylaws"), and the provisions in the Investor Rights Agreement described below. If the other holders of our Class A common stock are dissatisfied with the performance of our board of directors, they have no ability to remove any of our directors, unless for cause and then only upon the affirmative vote of holders of 66-2⁄3% of our outstanding Class A common stock and Class B common stock, voting as a single class.

In addition, in connection with the Business Combination, we entered into the Investor Rights Agreement with the CORE Investors which provides for an initial ten-person board of directors, consisting of nine individuals designated by the CORE Investors, and one independent director mutually agreed by the CORE Investors and Altimar Sponsor II, LLC (the "Sponsor"). The CORE Investors have certain continued nomination rights for a number of directors ranging from the majority of the board of directors to one director, while they beneficially own shares of common stock in excess of certain ownership percentage of the amount owned by the CORE Investors at the closing of the Business Combination ("Closing"), as determined in accordance with the Investor Rights Agreement. In addition, for so long as the CORE Investors beneficially own shares of common stock representing at least 5% of the amount owned by the CORE Investors at Closing, the CORE Investors will have the right to designate a person to attend meetings of our board (including any meetings of any committees thereof) in a non-voting observer capacity. See “Certain Relationships and Related Party Transactions, and Director Independence —Investor Rights Agreement” in our proxy statement for our 2023 annual meeting of stockholders which is expected to be filed with the SEC on or before May 1, 2023, for more details with respect to the Investor Rights Agreement.

The CORE Investors and their affiliates engage and will continue to engage in a broad spectrum of activities, including investments in the manufacturing and industrial industries generally, and engage and may continue to engage in the same or similar activities or related lines of business as those in which we are engaged or may engage in, directly or indirectly. In the ordinary course of their business activities, the CORE Investors and their affiliates may engage in activities in which their interests conflict with our interests or those of our other shareholders, such as investing in or advising businesses that directly or indirectly compete with certain portions of our business or are suppliers or partners of ours. Our Charter provides that none of the CORE Investors, any of their affiliates or any director who is not employed by us (including any non-employee director who serves as one of our officers in both his director and officer capacities) or its affiliates will have any duty to refrain from engaging, directly or indirectly, in the same business activities or similar business activities or lines of business in which we operate. The CORE Investors and their affiliates also may pursue acquisition opportunities that may be complementary to our business and, as a result, those acquisition opportunities may not be available to us. In addition, the CORE Investors and their affiliates may have an interest in pursuing acquisitions, divestitures, and other transactions that, in their judgment, could enhance their investment, even though such transactions might involve risks to you.

22

Because we are a “controlled company” for purposes of the corporate governance requirements of the NYSE, our stockholders will not have, and may never have, the protections that these corporate governance requirements are intended to provide.

Because we are a “controlled company” for purposes of the corporate governance requirements of the NYSE, we are not required to comply with the provisions requiring that a majority of our directors be independent, the compensation of our executives be determined by independent directors or nominees for election to our board of directors be selected by independent directors. If we choose to take advantage of any or all of these exemptions, our stockholders may not have the protections that these rules are intended to provide.

Under SEC Rules, we are an “emerging growth company” and a “smaller reporting company” and the reduced SEC disclosure requirements applicable to emerging growth companies and smaller reporting companies may make our common stock less attractive to investors.

We are an emerging growth company, as defined in the Jumpstart Our Business Startups ("JOBS") Act. As an emerging growth company, we may follow reduced disclosure requirements and do not have to make all of the disclosures that public companies that are not emerging growth companies do. We will remain an emerging growth company until the earlier of (a) the last day of the fiscal year in which we have total annual gross revenues of $1.235 billion or more (as adjusted for inflation); (b) the last day of the fiscal year following the fifth anniversary of the date of the completion of the initial public offering of Fathom; (c) the date on which we have issued more than $1.0 billion in nonconvertible debt during the previous three years; or (d) the date on which we are deemed to be a "large accelerated filer" under the rules of the SEC, which means the market value of our common stock that is held by non-affiliates exceeds $700 million as of the prior June 30. For so long as we remain an emerging growth company, we are permitted and intend to rely on exemptions from certain disclosure requirements that are applicable to other public companies that are not emerging growth companies. These exemptions include:

In addition, the JOBS Act provides that an emerging growth company can take advantage of an extended transition period for complying with new or revised accounting standards. This allows an emerging growth company to delay the adoption of certain accounting standards until those standards would otherwise apply to private companies. We have elected to use the extended transition period for complying with new or revised accounting standards; and as a result of this election, our financial statements may not be comparable to companies that comply with public company effective dates for any such new or revised accounting standards.

We may choose to take advantage of some, but not all, of the available exemptions for emerging growth companies. We cannot predict whether investors will find our common stock less attractive if we rely on these exemptions. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our share price may be more volatile.

In order to satisfy our obligations as a public company, we have hired, and may need to hire additional qualified accounting and financial personnel with appropriate public company experience.

As a public company, we must establish and maintain effective disclosure and financial controls and make changes in our corporate governance practices. We have hired and may need to hire additional accounting and financial personnel with appropriate public company experience and technical accounting knowledge. It may be difficult to retain such personnel, or to recruit additional qualified personnel if needed. Our existing operating expenses and operations will be impacted by the direct costs of our employment of additional accounting and financial personnel and the indirect consequences related to the diversion of management resources from research and development efforts.

23

The Company may be subject to securities litigation, which is expensive and could divert management attention.

Following the Business Combination, the per share price of our Class A common stock or the price per Warrant has been volatile and, in the past, companies that have experienced volatility in the market price of their stock have been subject to securities litigation, including class action litigation. Litigation of this type could result in substantial costs and diversion of management’s attention and resources, which could have a material adverse effect on our business, financial condition, and results of operations. Any adverse determination in litigation could also subject the Company to significant liabilities.

Because we became a publicly traded company by means other than a traditional underwritten initial public offering, the Company’s stockholders may face additional risks and uncertainties.

Because we became a publicly traded company by means of consummating the Business Combination rather than by means of a traditional underwritten initial public offering, there was no independent third-party underwriter selling the shares of the Company’s Class A common stock or warrants to purchase shares of Class A common stock ("the Warrants"), and, accordingly, the Company’s stockholders do not have the benefit of an independent review and investigation of the type normally performed by an unaffiliated, independent underwriter in a public securities offering. Due diligence reviews typically include an independent investigation of the background of the company, any advisors and their respective affiliates, review of the offering documents and independent analysis of the plan of business and any underlying financial assumptions. Although Altimar II performed a due diligence review and investigation of Fathom in connection with the Business Combination, the lack of an independent due diligence review and investigation in connection with that process increases the risk of investment in the Company because Altimar II’s due diligence review and investigation may not have uncovered facts that would be important to a potential investor.

In addition, because the Company did not become a publicly traded company by means of a traditional underwritten initial public offering, security or industry analysts may not provide, or be less likely to provide, coverage of the Company. Investment banks may also be less likely to agree to underwrite secondary offerings on behalf of the Company than they might otherwise be if the Company became a publicly traded company by means of a traditional underwritten initial public offering because they may be less familiar with the Company as a result of more limited coverage by analysts and the media. The failure to receive research coverage or support in the market for the Company’s Class A common stock could have an adverse effect on the Company’s ability to develop a liquid market for the Company’s Class A common stock.

Risks Related to our Structure and Governance

Delaware law, our Charter and our Bylaws contain certain provisions, including anti-takeover provisions, which limit the ability of stockholders to take certain actions and could delay or discourage takeover attempts that stockholders may consider favorable.

Our Charter and the Delaware General Corporation Law ("DGCL") contain provisions that could have the effect of rendering more difficult, delaying, or preventing an acquisition deemed undesirable by our board of directors and therefore depress the trading price of Fathom’s Class A common stock. These provisions could also make it difficult for stockholders to take certain actions, including electing directors who are not nominated by the current members of our board of directors or taking other corporate actions, including effecting changes in management. Among other things, our Charter and Bylaws include provisions regarding:

24

These provisions, alone or together, could delay or prevent hostile takeovers and changes in control or changes in our board or management.

In addition, as a Delaware corporation, Fathom generally is subject to provisions of Delaware law, including the DGCL, although Fathom has elected not to be governed by Section 203 of the DGCL.

Any provision of our Charter, our Bylaws or Delaware law that has the effect of delaying or preventing a change in control could limit the opportunity for stockholders to receive a premium for their shares of Fathom’s capital stock and could also affect the price that some investors are willing to pay for Fathom’s common stock.

In addition, the provisions of the Investor Rights Agreement, as described herein, provide the stockholders party thereto with certain board representation and other consent rights that could also have the effect of delaying or preventing a change in control.

Our Charter designates the Court of Chancery of the State of Delaware as the sole and exclusive forum for certain types of actions and proceedings that may be initiated by Fathom’s stockholders, which could limit Fathom’s stockholders’ ability to obtain a favorable judicial forum for disputes with Fathom or its directors, officers or other employees.

The Charter provides that, unless Fathom consents in writing to the selection of an alternative forum, (a) any derivative action or proceeding brought on behalf of Fathom, (b) any action asserting a claim of breach of a fiduciary duty owed by any current or former director, officer, other employee, agent or stockholder of Fathom to Fathom or Fathom’s stockholders, or any claim for aiding and abetting such alleged breach, (c) any action asserting a claim against Fathom or any current or former director, officer, other employee, agent or stockholder of Fathom (i) arising pursuant to any provision of the DGCL, our Charter (as it may be amended or restated) or our Bylaws or (ii) as to which the DGCL confers jurisdiction on the Delaware Court of Chancery or (d) any action asserting a claim against Fathom or any current or former director, officer, other employee, agent or stockholder of Fathom governed by the internal affairs doctrine of the law of the State of Delaware shall, as to any action in the foregoing clauses (a) through (d), to the fullest extent permitted by law, be solely and exclusively brought in the Delaware Court of Chancery; provided, however, that the foregoing shall not apply to any claim arising under federal securities laws, including the Securities Act as to which the federal district courts of the United States of America shall, to the fullest extent permitted by law, be the sole and exclusive forum. Notwithstanding the foregoing, the provisions of Article XI of our Charter will not apply to suits brought to enforce any liability or duty created by the Exchange Act, or any other claim for which the federal district courts of the United States of America shall be the sole and exclusive forum. Further, Section 22 of the Securities Act of 1933, as amended ("Securities Act"), creates concurrent jurisdiction for federal and state courts over all suits brought to enforce any duty or liability created by that act or the rules and regulations thereunder. Accordingly, there is uncertainty as to whether a court would enforce this forum selection provision as written as to claims arising under the Securities Act.

This choice-of-forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with Fathom or its directors, officers, stockholders, agents, or other employees, which may discourage such lawsuits. Alternatively, if a court were to find this provision of our Charter inapplicable or unenforceable with respect to one or more of the specified types of actions or proceedings, Fathom may incur additional costs associated with resolving such matters in other jurisdictions, which could materially and adversely affect Fathom’s business, financial condition and results of operations and result in a diversion of the time and resources of Fathom’s management and board of directors.

Our Charter does not limit the ability of the CORE Investors to compete with us.

The CORE Investors and their affiliates engage in a broad spectrum of activities, including investments in the financial services and technology industries. In the ordinary course of their business activities, the CORE Investors and their affiliates may engage in activities where their interests conflict with Fathom’s interests or those of its stockholders. Our Charter provides that none of the CORE Investors, any of their affiliates or any director who is not employed by Fathom (including any non-employee director who serves as one of its officers in both his director and officer capacities) or its affiliates will have any duty to refrain from engaging, directly or indirectly, in the same business activities or similar business activities or lines of business in which Fathom operates. The CORE Investors and their affiliates also may pursue, in their capacities other than as directors of Fathom, acquisition opportunities that may be complementary to Fathom’s business, and, as a result, those acquisition opportunities may not be available to Fathom. In addition, the CORE Investors may have an interest in pursuing acquisitions, divestitures, and other transactions that, in their judgment, could enhance their investment, even though such transactions might involve risks to you.

25

We are a holding company and our only material asset is our interest in Fathom OpCo, and we are accordingly dependent upon distributions made by Fathom OpCo to pay dividends, taxes, and other expenses, including payments under the Tax Receivable Agreement ("TRA").

We are a holding company with no material assets other than our Class A common units in Fathom OpCo ("New Fathom Units") which correspond on a one-to-one basis with the outstanding shares of our Class A common stock. As a result, Fathom has no independent means of generating revenue or cash flow. Our ability to pay taxes, and other expenses, including payments under the TRA, described in Note 21 - Income Taxes within our consolidated financial statements, will depend on the financial results and cash flows of Fathom OpCo and its subsidiaries and the distributions we receive from Fathom OpCo. Deterioration in the financial condition, earnings, or cash flow of Fathom OpCo and its subsidiaries for any reason could limit or impair Fathom OpCo’s ability to pay such distributions. Additionally, to the extent that we need funds and Fathom OpCo and/or its subsidiaries are restricted from making such distributions under applicable law or regulation or under the terms of any financing arrangements, or Fathom OpCo and/or its subsidiaries are otherwise unable to provide such funds, it could materially adversely affect Fathom’s liquidity and financial condition.

Subject to the discussion below, Fathom OpCo will continue to be treated as a partnership for U.S. federal income tax purposes and, as such, generally will not be subject to any entity-level U.S. federal income tax. Instead, taxable income will be allocated to holders of New Fathom Units. Accordingly, we will be required to pay income taxes on our allocable share of any net taxable income of Fathom OpCo. Under the terms of the Second Amended and Restated Limited Liability Company Agreement of Fathom Holdco, LLC, dated as of December 23, 2021 (the "Fathom Operating Agreement"), Fathom OpCo is obligated to make tax distributions to holders of the New Fathom Units (including us) calculated at certain assumed tax rates. In addition to tax expenses, we will also incur expenses related to our operations, including our payment obligations under the TRA, which likely will be significant, and some of which will be reimbursed by Fathom OpCo (excluding payment obligations under the TRA). We intend to cause Fathom OpCo to make ordinary distributions and tax distributions to holders of New Fathom Units on a pro rata basis in amounts sufficient to cover all applicable taxes, relevant operating expenses, payments by us under the TRA and dividends, if any, declared by us. However, as discussed above, Fathom OpCo’s ability to make such distributions may be subject to various limitations and restrictions including, but not limited to, retention of amounts necessary to satisfy the obligations of Fathom OpCo and its subsidiaries and restrictions on distributions that would violate any applicable restrictions contained in Fathom OpCo’s or its subsidiaries’ debt agreements, or any applicable law, or that would have the effect of rendering Fathom OpCo or a subsidiary insolvent. To the extent that Fathom is unable to make payments under the TRA for any reason, such payments will be deferred and will accrue interest until paid; provided, however, that nonpayment for a specified period may constitute a breach of a material obligation under the Tax Receivable Agreement and therefore accelerate payments under the TRA, which could be substantial.

Additionally, although Fathom OpCo and its subsidiaries generally will not be subject to any entity-level U.S. federal income tax, they may be liable for audit adjustments to prior year tax returns, absent an election to the contrary. In the event Fathom OpCo’s calculations of taxable income are incorrect, Fathom OpCo, its subsidiaries and/or their respective owners, including us, in later years may be subject to material liabilities as a result of such audits.

If Fathom OpCo were treated as a corporation for U.S. federal income tax or state tax purposes, then the amount available for distribution by Fathom OpCo could be substantially reduced and the value of our common stock will likely be adversely affected.

An entity that would otherwise be classified as a partnership for U.S. federal income tax purposes (such as Fathom OpCo) may nonetheless be treated as, and taxable as, a corporation if it is a “publicly traded partnership” unless an exception to such treatment applies. An entity that would otherwise be classified as a partnership for U.S. federal income tax purposes will be treated as a “publicly traded partnership” if interests in such entity are traded on an established securities market or interests in such entity are readily tradable on a secondary market or the substantial equivalent thereof. If Fathom OpCo were determined to be treated as a “publicly traded partnership” (and taxable as a corporation) for U.S. federal income tax purposes, Fathom OpCo would be taxable on its income at the U.S. federal income tax rates applicable to corporations and distributions by Fathom OpCo to its partners (including Fathom) could be taxable as dividends to such partners to the extent of the earnings and profits of Fathom OpCo. In addition, we would no longer have the benefit of increases in the tax basis of Fathom OpCo’s assets as a result of exchanges of New Fathom Units for shares of Fathom Class A common stock. Pursuant to the Fathom Operating Agreement, the Exchange TRA Parties (as defined in the TRA) may, from time to time, subject to the terms of the Fathom Operating Agreement, exchange their interests in Fathom OpCo and have such interests redeemed by Fathom OpCo for cash or Fathom stock. While such exchanges could be treated as trading in the interests of Fathom OpCo for purposes of testing “publicly traded partnership” status, the Fathom Operating Agreement requires us to impose restrictions on exchanges that we determine to be necessary or advisable so that Fathom OpCo is not treated as a “publicly traded partnership” for U.S. federal income tax purposes. Accordingly, while such position is not free from doubt, Fathom OpCo is expected to be operated such that it is not treated as a “publicly traded partnership” taxable as a corporation for U.S. federal income tax purposes and we intend to take the position that Fathom OpCo is not so treated as a result of exchanges of its interests pursuant to the Fathom Operating Agreement.

26

Pursuant to the TRA, we will be required to make payments to Blocker TRA Parties and Exchange TRA Parties (each as defined in the Tax Receivable Agreement) for certain tax benefits we may claim and those payments will likely be substantial.

The Exchange TRA Parties (as defined in the TRA) may in the future exchange their New Fathom Units, together with the cancellation of an equal number of shares of Class B common stock, for shares of Fathom Class A common stock, or cash pursuant to the Fathom Operating Agreement. Such transactions are expected to result in increases in our allocable share of the tax basis of the tangible and intangible assets of Fathom OpCo and its subsidiaries. These increases in tax basis may increase (for income tax purposes) depreciation and amortization deductions and therefore reduce the amount of income or franchise tax that Fathom would otherwise be required to pay in the future had such sales and exchanges never occurred. Additionally, in connection with the closing of the Business Combination, we acquired the Blockers (as defined in the TRA) from the Blocker TRA Parties (as defined in the TRA). Certain tax assets and attributes of the Blockers may be available to reduce the amount of income or franchise tax that we would otherwise be required to pay in the future had we not acquired the Blockers.

In connection with the Business Combination, we entered into the TRA, which generally provides for the payment by it of 85% of the net cash savings, if any, in U.S. federal, state and local, income and franchise tax (computed using certain assumptions to address the impact of state and local taxes) that it actually realizes (or in certain cases is deemed to realize) as a result of tax basis in certain assets and other tax attributes of the Blockers and of Fathom at the time of the Business Combination (including as a result of any cash payments made to Fathom OpCo in exchange for New Fathom Units pursuant to the Business Combination), any increases in tax basis and other tax benefits related to the payment of cash consideration pursuant to the Business Combination Agreement and any increases in tax basis and other tax benefits resulting from any exchange of New Fathom Units for shares of Class A common stock or cash in the future and tax benefits related to entering into and making payments under the TRA. We will retain the benefit of the remaining 15% of such tax savings.

Payments under the TRA are our obligation not Fathom OpCo’s. The actual increase in our allocable share of Fathom OpCo’s tax basis in its assets, as well as estimating the amount and timing of any payments due to the TRA Parties based on future exchanges under the TRA, is by its nature, imprecise. For purposes of the TRA, savings in tax generally are calculated by comparing Fathom’s actual tax liability (determined by using the actual applicable U.S. federal income tax rate and assumed combined state and local income tax rate) to the amount that Fathom would have been required to pay had it not been able to utilize any of the tax benefits subject to the TRA. The amounts payable, as well as the timing of any payments under the TRA will vary depending upon a number of factors, including the timing of exchanges, the market price of the Class A common stock at the time of the exchange, the extent to which such exchanges are taxable, the depreciation and amortization periods that will apply to any increases in tax basis, the U.S. federal income tax rate then applicable, and the amount and timing of the recognition of Fathom’s income. While many of the factors that will determine the amount of payments that we will make under the TRA are outside of its control, we expect that the payments it will make under the TRA will be substantial. At this time, we estimate that the total amount of future tax benefit payments anticipated to be made in the future as a result of the tax basis of Fathom as of December 31, 2022 will be $35.2 million. The amount of these payments is based upon the assumptions that (i) there are no changes in future income tax rates or tax laws, (ii) Fathom is able to fully utilize tax attributes arising in connection with the Business Combination in future tax periods, and (iii) there is no acceleration of amounts due under the TRA on account of early termination.

Any payments made by us under the TRA will generally reduce the amount of overall cash flow that might have otherwise been available to us. To the extent that we are unable to make timely payments under the TRA for any reason, the unpaid amounts will be deferred and will accrue interest until paid; however, nonpayment for a specified period may constitute a breach of a material obligation under the TRA and therefore accelerate payments due under the TRA, as further described below. Furthermore, our future obligation to make payments under the TRA could make us a less attractive target for an acquisition, particularly in the case of an acquirer that cannot use some or all of the tax benefits that may be realized or deemed realized under the TRA. See "Certain Relationships and Related Transactions, and Director Independence — Tax Receivable Agreement." in our proxy statement for our 2023 annual meeting of stockholders which is expected to be filed with the SEC on or before May 1, 2023.

27

In certain cases, payments under the TRA may exceed the actual tax benefits Fathom realizes or be accelerated.

Payments under the TRA will be based on the tax reporting positions that Fathom determines under the procedures and assumptions set forth in the TRA, and the U.S. Internal Revenue Service ("IRS") or another taxing authority may challenge all or any part of the tax basis increases, as well as other tax positions that Fathom takes, and a court may sustain such a challenge. In the event that any tax benefits initially claimed by Fathom are disallowed, the Exchange TRA Parties and the Blocker TRA Parties (each as defined in the TRA) will not be required to reimburse Fathom for any excess payments that may previously have been made under the TRA, for example, due to adjustments resulting from examinations by taxing authorities. Rather, excess payments made to such holders will be netted against any future cash payments otherwise required to be made by Fathom under the TRA, if any, after the determination of such excess. However, a challenge to any tax benefits initially claimed by Fathom may not arise for a number of years following the initial time of such payment or, even if challenged early, such excess cash payment may be greater than the amount of future cash payments that Fathom might otherwise be required to make under the terms of the TRA and, as a result, there might not be future cash payments against which to net. Actual tax benefits realized by Fathom may differ from tax benefits calculated under the TRA as a result of the use of certain assumptions in the TRA, including the use of an assumed weighted-average state and local income tax rate to calculate tax benefits. As a result, in certain circumstances Fathom could make payments under the TRA in excess of Fathom’s actual income or franchise tax savings, which could materially impair Fathom’s financial condition.

Moreover, the TRA provides that, in certain events, including a change of control, breach of a material obligation under the TRA, or Fathom’s exercise of early termination rights, Fathom’s obligations under the TRA will accelerate and Fathom will be required to make a lump-sum cash payment to the Exchange TRA Parties and the Blocker TRA Parties and other applicable parties to the TRA equal to the present value of all forecasted future payments that would have otherwise been made under the TRA, which lump-sum payment would be based on certain assumptions, including those relating to Fathom’s future taxable income. The lump-sum payment would likely be substantial and could exceed the actual tax benefits that Fathom realizes subsequent to such payment because such payment would be calculated assuming, among other things, that Fathom would have certain tax benefits available to it and that Fathom would be able to use the potential tax benefits in future years. Assuming no material changes in the relevant tax law, we expect that if we experienced a change of control or the TRA had been terminated at December 31, 2022, the estimated lump-sum payment would be approximately $43.8 million (calculated using a discount rate equal to a per annum rate of LIBOR plus 100 basis points, applied against an undiscounted liability of approximately $78.9 million).

There may be a material negative effect on Fathom’s liquidity if the payments required to be made by Fathom under the TRA exceed the actual income or franchise tax savings that Fathom realizes. Furthermore, Fathom’s obligations to make payments under the TRA could also have the effect of delaying, deferring or preventing certain mergers, asset sales, other forms of business combinations or other changes of control.

Fathom OpCo may directly or indirectly make distributions of cash to us substantially in excess of the amounts we use to make distributions to our stockholders and pay our expenses (including our taxes and payments by Fathom under the TRA). To the extent we do not distribute such excess cash as dividends to our shareholders, the direct or indirect holders of New Fathom Units would benefit from any value attributable to such cash as a result of their ownership of our stock upon an exchange of their New Fathom Units.

We are entitled to receive a pro rata portion of any distributions made by Fathom OpCo. Any cash received from such distributions will first be used to satisfy any tax liability and then to make any payments required to be made by Fathom under the TRA. Subject to having available cash and subject to limitations imposed by applicable law and contractual restrictions, the Fathom Operating Agreement requires Fathom OpCo to make certain distributions to holders of New Fathom Units (including Fathom) pro rata to facilitate the payment of taxes with respect to the income of Fathom OpCo that is allocated to them. To the extent that the tax distributions we directly or indirectly receive exceed the amounts we actually require to pay taxes, TRA payments and other expenses (which is likely to be the case given that the assumed tax rate for such distributions will generally exceed our effective tax rate), we will not be required to distribute such excess cash. Our board of directors may, in its sole discretion, choose to use such excess cash for certain purposes, including to make distributions to the holders of our stock. Unless and until our board of directors chooses, in its sole discretion, to declare a distribution, we will have no obligation to distribute such cash (or other available cash other than any declared dividend) to our stockholders.

No adjustments to the exchange ratio of New Fathom Units for shares of our common stock will be made as a result of either (i) any cash distribution by us or (ii) any cash that we retain and do not distribute to our stockholders. To the extent we do not distribute such cash as dividends and instead, for example, hold such cash balances or use such cash for certain other purposes, this may result in shares of our stock increasing in value relative to the New Fathom Units. The holders of New Fathom Units may benefit from any value attributable to such cash balances if they acquire shares of our stock in an exchange of New Fathom Units.

28

We may amend the terms of the Warrants in a manner that may be adverse to holders of Public Warrants with the approval by the holders of at least 50% of the then outstanding Public Warrants. As a result, the exercise price of the Warrants could be increased, the exercise period could be shortened and the number of shares of Class A common stock purchasable upon exercise of a Warrant could be decreased, all without approval of each Warrant affected.

Our Warrants were issued in registered form under a Warrant Agreement between Continental Stock Transfer and Trust Company, as Warrant Agent, and us. The Warrants collectively consist of (i) 9,900,000 warrants to purchase one of Altimar II's Class A ordinary shares acquired by the Sponsor in a private placement simultaneously with the closing of the Altimar II IPO (the "Private Placement Warrants") and (ii) 8,625,000 warrants issued in the Altimar II IPO, entitling the holder thereof to purchase one of Altimar II's Class A ordinary shares (the "Public Warrants" and, collectively with the Private Placement Warrants, the "Warrants"). Upon closing of the Business Combination, the shares issuable upon exercise of the Private Placement Warrants and the Public Warrants became shares of Fathom's Class A common stock. The Warrant Agreement provides that the terms of the Warrants may be amended without the consent of any holder to cure any ambiguity or correct any defective provision, but requires the approval by the holders of at least 50% of the then outstanding Public Warrants to make any change that adversely affects the interests of the registered holders of Public Warrants. Accordingly, we may amend the terms of the Public Warrants in a manner adverse to a holder if holders of at least 50% of the then outstanding Public Warrants approve of such amendment. Although our ability to amend the terms of the Public Warrants with the consent of at least 50% of the then outstanding Public Warrants is unlimited, examples of such amendments could be amendments to, among other things, increase the exercise price of the Warrants, convert the Warrants into cash, shorten the exercise period or decrease the number of shares of Class A common stock, as applicable, purchasable upon exercise of a Warrant.

We may redeem unexpired Warrants prior to their exercise at a time that is disadvantageous to holders of Warrants, thereby making such Warrants worthless.

We have the ability to redeem outstanding Warrants at any time after they become exercisable and prior to their expiration, at a price of $0.01 per Warrant, provided that the last sale price of our Class A common stock equals or exceeds $18.00 per share (as adjusted for share splits, share capitalizations, reorganizations, recapitalizations and the like) on each of 20 trading days within a 30 trading-day period ending on the third trading day prior to the date on which notice of such redemption is given. We will not redeem the Warrants unless an effective registration statement under the Securities Act covering the Class A common stock, issuable upon exercise of the Warrants is effective and a current prospectus relating to the Class A common stock, is available throughout the 30-day redemption period, except if the Warrants may be exercised on a cashless basis and such cashless exercise is exempt from registration under the Securities Act. If and when the Warrants become redeemable by us, we may exercise our redemption right even if we are unable to register or qualify the underlying securities for sale under all applicable state securities laws. Redemption of the outstanding Warrants could force holders thereof to (i) exercise Warrants and pay the exercise price therefor at a time when it may be disadvantageous for such holders to do so, (ii) sell Warrants at the then-current market price when such holders might otherwise wish to hold Warrants or (iii) accept the nominal redemption price which, at the time the outstanding Warrants are called for redemption, is likely to be substantially less than the market value of such Warrants. None of the Private Placement Warrants will be redeemable by us so long as they are held by their initial purchasers or their permitted transferees.

In addition, we may redeem Warrants after they become exercisable for a number of shares of Class A common stock determined based on the redemption date and the fair market value of our Class A common stock. Any such redemption may have similar consequences to a cash redemption described above. In addition, such redemption may occur at a time when the Warrants are “out-of-the-money,” in which case holders thereof would lose any potential embedded value from a subsequent increase in the value of the Class A common stock had such Warrants remained outstanding.

We will receive up to an aggregate of approximately $213.0 million from the exercise of the Warrants, assuming the exercise in full of all 18,525,000 Warrants for cash. We will have broad discretion over the use of proceeds from the exercise of the Warrants. We expect to use the net proceeds from the exercise of the Warrants, if any, for general corporate purposes. There is no assurance that the holders of the Warrants will elect to exercise any or all of such Warrants. To the extent that the Warrants are exercised on a “cashless basis,” the amount of cash we would receive from the exercise of the Warrants will decrease.

The volatility in our stock price directly impacts the valuation of our Warrants, and the earnout shares and could increase the volatility in our net income (loss) in our consolidated statements of comprehensive income (loss).

The change in fair value of our Warrants and earnout shares is the result of changes in the price of our Class A common stock at each reporting period. The change in fair value of Warrants, Fathom earnout share liabilities, and Sponsor earnout share liabilities represents the mark-to-market fair value adjustments of these instruments in connection with the Business Combination. Significant changes in our stock price may adversely affect our net income (loss) in our consolidated statements of comprehensive income (loss).

29

Risks Relating to the Ownership of Our Common Stock

There can be no assurance that we will be able to remain in compliance with the continued listing standards of the NYSE.

On March 29, 2023, we were notified by the NYSE that the average closing price of our Class A common stock over a prior 30 consecutive trading day period was below $1.00 per share, which is the minimum average closing price per share required to maintain listing on the NYSE under Section 802.01C of the NYSE Listed Company Manual (“Section 802.01C”). Under Section 802.01C, we have a period of six months following the receipt of this notice to regain compliance with the minimum share price requirement, or until our next annual meeting of stockholders if stockholder approval is required to cure the share price non-compliance, as would be the case to effectuate a reverse stock split. We can regain compliance at any time during the six-month cure period if on the last trading day of any calendar month during the cure period, the Common Stock has (i) a closing price of at least $1.00 per share and (ii) an average closing price of at least $1.00 per share over the 30-trading day period ending on the last trading day of such month. As required by the NYSE, we intend to timely respond to the NYSE with respect to our intent to cure the deficiency to regain compliance with the price criteria. We cannot assure you that we will be able to regain compliance with the NYSE’s share price criteria.

In addition, our common stock could also be delisted if (i) our average market capitalization over a consecutive 30 trading-day period is less than $15 million, or (ii) our common stock trades at an “abnormally low” price. In either case, our common stock would be suspended from trading on the NYSE immediately, and the NYSE would begin the process to delist our common stock, subject to our right to appeal under NYSE rules. Additionally, the NYSE considers a listed company to be out of compliance with its continued listing standards if the company’s average global market capitalization over a 30 consecutive trading-day period is less than $50.0 million and, at the same time, the company’s stockholders’ equity is less than $50.0 million. If the company does not regain compliance within a cure period up to a maximum of 18 months, it will be subject to delisting. If any of these were to occur, there is no assurance that any appeal we undertake in these or other circumstances would be successful, nor is there any assurance that we will remain in compliance with the other NYSE continued listing standards.

If we fail to satisfy the NYSE’s continued listing standards, our common stock will be subject to delisting. Delisting from the NYSE would likely have a negative effect on the liquidity and market price of our common stock, reduce the number of investors willing to hold or acquire our common stock, limit or reduce the amount of analyst coverage we receive, and impair your ability to sell or purchase our common stock when you wish to do so. In addition, a delisting from the NYSE might negatively impact our reputation and, as a consequence, our business. Additionally, if we were delisted from the NYSE and we are not able to list our common stock on another national exchange we will not be eligible to use Form S-3 registration statements, which would delay our ability to raise funds in the future, limit the type of offerings of common stock we could undertake, and increase the expenses of any offering.

In the event of a delisting of our common stock, we can provide no assurance that any action taken by us to restore compliance with listing requirements would allow our securities to become listed again, stabilize the market price or improve the liquidity of our common stock, prevent our common stock from dropping below the NYSE minimum share price requirement or prevent future non-compliance with the NYSE’s listing standards. Additionally, if our common stock is not listed on, or becomes delisted from, the NYSE for any reason, and is quoted on the OTC Bulletin Board, an inter-dealer automated quotation system for equity securities that is not a national securities exchange, the liquidity and price of our common stock may be more limited than if we were quoted or listed on the NYSE or another national securities exchange. You may be unable to sell your common stock unless a market can be established or sustained.

Our operating results and financial condition may fluctuate on a quarterly and annual basis.

Our operating results and financial condition fluctuate from quarter-to-quarter and year-to-year and are likely to continue to vary due to a number of factors, many of which are not within our control. Both our business and the digital manufacturing industry are changing and evolving rapidly, and our historical operating results may not be useful in predicting our future operating results. If our operating results do not meet the guidance that we provide to the marketplace or the expectations of securities analysts or investors, the market price of our common stock will likely decline. Fluctuations in our operating results and financial condition may be due to a number of factors, including:

30

In addition, our revenues and operating results may fluctuate from quarter-to-quarter and year-to-year due to our sales cycle and seasonality among our customers. Generally, our digital manufacturing solutions are subject to the adoption and capital expenditure cycles of our customers. Additionally, for our more complex solutions, which may require additional facilities investment, potential customers may spend a substantial amount of time performing internal assessments prior to making a purchase decision. This may cause us to devote significant effort in advance of a potential sale without any guarantee of receiving any related revenues. As a result, revenues and operating results for future periods are difficult to predict with any significant degree of certainty, which could lead to adverse effects on our inventory levels and overall financial condition.

Due to the foregoing factors, and the other risks discussed in this Part I, Item 1A: “Risk Factors” and elsewhere in this Annual Report, you should not rely on quarter-over-quarter and year-over-year comparisons of our operating results as an indicator of our future performance.

Our stock price has been and may continue to be volatile or may decline regardless of our operating performance.

You may lose some or all of your investment. The trading price of our common stock has been and may continue to be volatile. The stock market recently has experienced extreme volatility. This volatility often has been unrelated or disproportionate to the operating performance of particular companies. You may not be able to resell your shares at an attractive price due to a number of factors such as those described in this “Risk Factors” section and the following:

31

Furthermore, the trading price of our Class A common stock may be adversely affected by third parties trying to drive down the market price. Short sellers and others, some of whom post anonymously on social media, may be positioned to profit if our stock declines and their activities can negatively affect our stock price.

These broad market, industry and other factors may materially reduce the market price of our common stock, regardless of our operating performance. In addition, price volatility may be greater if the public float and trading volume of our common stock continues to be low. As a result, you may suffer a loss on your investment.

If securities or industry analysts publish inaccurate or unfavorable research or reports about our business, our stock price and trading volume could decline.

The trading market for our common stock depends, in part, on the research and reports that third-party securities analysts publish about us and the industry in which we operate. We may be unable or slow to attract research coverage and if one or more analysts cease coverage of us, the price and trading volume of our securities would likely be negatively impacted. If any of the analysts that may cover us change their recommendation regarding our common stock adversely, or provide more favorable relative recommendations about our competitors or publish inaccurate research or reports, the price of our common stock would likely decline. If any analyst that may cover us ceases covering us or fails to regularly publish reports on us, we could lose visibility in the financial markets, which could cause the price or trading volume of our common stock to decline. Moreover, if one or more of the analysts who cover us downgrades our common stock, or if our reporting results do not meet their expectations, the market price of our common stock could decline.

32

Item 1B. Unresolved Staff Comments.

None.

Item 2. Properties.

Our corporate headquarters is located in leased office space in Hartland, Wisconsin. We currently use approximately 450,000 square feet of manufacturing capacity across 12 facilities located throughout the U.S., including Texas, Florida, Arizona, Colorado, California, Wisconsin, Minnesota, New York and Illinois. With the exception of our Minnesota and Illinois locations, which we own, all of our facilities are located in leased premises.

We believe that the facilities we currently occupy are adequate for the purposes for which they are being used and are well maintained. In general, no difficulty is anticipated in negotiating renewals as leases expire or in finding other satisfactory space if the premises become unavailable. See Note 16 “Leases” to our consolidated financial statements included in this Annual Report on Form 10-K for additional information.

Item 3. Legal Proceedings.

We may from time to time be involved in litigation and claims incidental to the conduct of our business. We are not currently subject to any pending legal (including judicial, regulatory, administrative or arbitration) proceedings that we expect to have a material impact on our consolidated financial statements. However, given the inherent unpredictability of these types of proceedings and the potentially large and/or indeterminate amounts that could be sought, an adverse outcome in certain matters could have a material effect on Fathom's financial results in any particular period. See Note 20 "Commitments and Contingencies" to our consolidated financial statements for additional information.

Item 4. Mine Safety Disclosures.

Not applicable.

33

Part II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities.

Market for Registrant’s Common Equity

Our Class A common stock and Public Warrants are currently listed on NYSE under the symbols “FATH” and “FATH.WS”, respectively. Prior to the consummation of the Business Combination, Altimar II’s Class A ordinary shares and Public Warrants traded on the NYSE under the ticker symbols “ATMR” and “ATMR.WS”, respectively.

Holders of Record

As of April 4, 2022, there were 32 holders of record of Class A common stock and 2 holders of record of Class B common stock. Such numbers do not include beneficial owners holding our securities through nominee names. Our Class B common stock is not registered and we do not intend to list the Class B common stock on any exchange or stock market.

Dividends

We do not intend to declare or pay cash dividends in the foreseeable future. Our management anticipates that all earnings and other cash resources, if any, will be retained for investment in our business.

Sales of Unregistered Securities

None.

Issuer Purchases of Equity Securities

None.

Item 6. [Reserved]

34

Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations.

The following discussion and analysis of our financial condition and results of operations should be read in conjunction with Fathom Digital Manufacturing Corporation's financial statements and notes thereto included elsewhere in this Annual Report on Form 10-K. This discussion and analysis contains forward-looking statements that involve risks and uncertainties. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of various factors, including those set forth elsewhere in this Annual Report on Form 10-K.

Overview

Fathom Digital Manufacturing Corporation was incorporated in Delaware in December 2021. However, our roots stretch back over 35 years with the founding of several of our subsidiaries. The terms “Fathom”, the “Company,” “we,” “us,” and “our” as used herein refer to the business and operations of Fathom Digital Manufacturing Corporation and its consolidated subsidiaries.

We are a leading national on-demand digital manufacturing platform at the forefront of the Industry 4.0 revolution. Industry 4.0 utilizes e-commerce, automation, and data sharing in a cyber-physical system to communicate and cooperate in the manufacturing process over the Internet of Things ("IoT"). Using our expansive manufacturing footprint and extensive expertise in both additive and traditional manufacturing, we provide comprehensive product development and on-demand manufacturing services to many of the largest and most innovative companies in the world. Our unified suite of manufacturing technologies, processes, and proprietary software enables us to deliver hybridized solutions that meet the specific needs of our customers, empowering them to tackle complex manufacturing problems and accelerate product development cycles.

Our differentiated strategy focuses on speed, problem solving, adaptive technical responsiveness, and a technology agnostic approach across our 25 plus manufacturing processes to meet customers’ design intent. This allows our customers to iterate faster, often shortening their product development and production cycles from months to days.

We seamlessly blend in-house capabilities consisting of plastic and metal additive technologies, injection molding and tooling, computer numerical control (“CNC”) machining, and precision sheet metal fabrication. We operate over 530 advanced manufacturing systems across 25 unique manufacturing processes and a 450,000 sq. ft. manufacturing footprint, spanning 12 facilities located primarily within the U.S. We believe we are positioned to serve the largest geographic markets in which our customers are located and enable cost effective and rapid turnaround times for our customers. Our scale and the breadth of offerings allow our customers to consolidate their supply chain and product development needs through the ability to source through a single manufacturing supplier. Fathom’s manufacturing technologies and capacity are further extended through the utilization of a selected group of highly qualified suppliers that specialize in injection molding and tooling and CNC machining.

We have experienced significant growth since inception both organically and through our successful and proven acquisition playbook, which is enabled by our proprietary software platform that allows for a streamlined integration of acquired companies. Over the past three years, we have successfully completed 13 acquisitions to bolster our operations and offerings. Fathom started as Midwest Composite Technologies, LLC ("MCT"), a leader in prototyping and low-volume services. Founded in 1984, MCT specialized in model making, industrial design, and rapid prototyping. Today, MCT serves companies through a variety of in-house additive manufacturing technologies, including 3D printing and processing, CNC machining, injection molding, and industrial design capabilities. In September 2019, we acquired Kemeera, LLC to expand our additive, CNC machining injection molding, and development and engineering services, as well as bring urethane casting capabilities. In December 2019, we acquired ICOMold LLC ("ICOMold") to expand our injection molding capabilities and significantly enhance our customer experience by bringing in-house an interactive, automated quotation system capable of providing feedback in 30 seconds with an intuitive, customer-facing project management portal, which we have continued to develop and enhance. Our acquisition of ICOMold also expanded our capabilities into China. In July 2020, we acquired Incodema, LLC and Newchem, LLC to expand our in-house manufacturing processes to include precision sheet metal engineering solutions, including a broad array of sheet metal cutting and forming solutions such as laser cutting, micro waterjet, specialty stamping, and photochemical etching, among others, for quick and complex, tight tolerance parts. In August 2020, we acquired GPI Prototype & Manufacturing Services, LLC ("GPI") to expand our additive manufacturing capabilities. GPI was one of the first metal additive manufacturing service providers in the U.S., bringing metallurgical expertise in-house and enabling the Company to produce metal parts with complex geometries for on-demand manufacturing applications. In December 2020, we acquired Dahlquist Machine, LLC to expand our precision machining capabilities with state-of-the-art CNC mills and lathes for high-speed precision machining of light metals, aluminum, and plastics. In December 2020, we also acquired Majestic Metals, LLC, further expanding our precision sheet metal fabrication capabilities. Further, in December 2020, we acquired Mark Two Engineering, LLC expanding our precision machining services and footprint in the medical device industry. In February 2021, we acquired Summit Tooling, Inc. and Summit Plastics LLC, further expanding our plastic injection mold manufacturing capabilities. In April 2021, we acquired Centex Machine and Welding Inc. and Laser Manufacturing, Inc. to expand our high-precision manufacturing services specializing in CNC machining and medical device manufacturing. In April 2021, we also acquired Sureshot Precision, LLC (d/b/a Micropulse West) expanding our Electrical Discharge Machine (“EDM”) services, and CNC and manual machining capabilities. Further, in April 2021, we acquired Precision Process, LLC specializing in CNC machining, engineering support, and EDM services.

35

We continue to invest significantly in the enhancement and expansion of our technologies, processes, and capabilities with the aim of better serving the needs of a broader set of customers and end-markets. As a result of our efforts described above, we have developed a loyal base of approximately 2,500 customers, including many of the most innovative companies in the world. Our customers span across a diverse range of end-markets, including, but not limited to, the aerospace, defense, technology, medical, automotive, and IoT sectors. This diverse customer base has allowed for no single customer to represent more than 7.1% and 4.4% of our revenue in 2022 and 2021, respectively.

We believe the market for our on-demand digital manufacturing services across manufacturing applications is largely unsaturated as companies continue to realize the efficiency and effectiveness of our rapid quotation system and 3D CAD driven manufacturing processes. Our market is projected to grow, fueled by demand for additive manufacturing and continuation of the trend of customers increasingly outsourcing their prototyping and low-to-medium volume production needs. We believe our position as the only on-demand digital manufacturing platform purpose-built to serve the rapid prototyping and low-to-medium volume production needs of the largest and most innovative companies, coupled with our competitive strengths, will allow us to maintain and extend our market leading position.

Factors Affecting the Comparability of our Results of Operations

As a result of a number of factors, our historical results of operations are not comparable from period to period and may not be comparable to our financial results of operations in future periods. Set forth below is a brief discussion of the key factors that may impact the comparability of our results of operations in future operations.

Impact of the Business Combination

Fathom is subject to corporate level tax rates at the federal, state and local levels. Fathom OpCo was and is treated as a flow-through entity for U.S. federal income tax purposes, and as such, has generally not been subject to U.S. federal income tax at the entity level. Accordingly, other than for certain consolidated subsidiaries of the Predecessor that are structured as corporations and unless otherwise specified, the historical results of operations and other financial information presented does not include any provision for U.S. federal income tax.

Fathom pays U.S. federal and state income taxes as a corporation on its share of our taxable income. The Business Combination was accounted for as a business combination using the acquisition method of accounting. Accordingly, the assets and liabilities, including any identified intangible assets, were recorded at their preliminary fair values at the date of completion of the Business Combination, with any excess of the purchase price over the preliminary fair value recorded as goodwill. The application of business combination accounting required the use of significant estimates and assumptions.

As a result of the application of accounting for the Business Combination, the historical consolidated financial statements of Fathom OpCo are not necessarily indicative of the Fathom's future results of operations, financial position and cash flows. For example, increased tangible and intangible assets resulting from adjusting the basis of tangible and intangible assets to their fair value would result in increased depreciation and amortization expense in the periods following the consummation of the Business Combination.

In connection with the Business Combination, we entered into a Tax Receivable Agreement (“TRA”) with certain of our pre-Business Combination owners that provides for the payment by Fathom to such owners of 85% of the benefits that Fathom is deemed to realize as a result of the Company’s share of existing tax basis acquired in the Business Combination and other tax benefits related to entering into the TRA.

Additionally, in connection with the Business Combination, we have accounted for the issuance of warrants and earnout shares as liabilities which require re-measurement to fair value at the end of each reporting period, as applicable, and adopted the Fathom 2021 Omnibus Incentive Plan which will result in higher share-based compensation expenses.

Impact of Becoming a Public Company

We have incurred additional costs associated with operating as a public company, including human resources, legal, consulting, regulatory, insurance, accounting, investor relations and other expenses that we did not incur as a private company. The Sarbanes-Oxley Act and rules adopted by the SEC require public companies to implement specified corporate governance practices that are not applicable to a private company. These additional rules and regulations have increased our legal, regulatory and financial compliance costs and will make some activities more time-consuming and costly.

36

Key Factors Affecting Our Results

Our financial position and results of operations depend to a significant extent on the following factors:

Industry Opportunity and Competitive Landscape

As discussed above, the market in which we operate is projected to grow, fueled by increased demand for additive manufacturing and continuing trends in customer outsourcing of production needs. We operate in a large, fragmented, and competitive industry, competing for customers with a range of digital manufacturers, digital manufacturing brokers, and regional design bureaus. We believe we are uniquely positioned as the only full-service outsourced solution built specifically to cater to the manufacturing needs of enterprise-level corporate customers. In particular, we believe we compare favorably to other industry participants on the basis of the following competitive factors:

Customer Product Life Cycle and Connectivity

We believe that a number of trends affecting our industry have affected our results of operations and may continue to do so. For example, we believe that many of our target customers are facing three mega trends which are disrupting long-term product growth models including (i) increased pressure to shorten product life-cycles, (ii) manufactured parts on-demand, and (iii) expectation to deliver products that are personalized and customized to unique customer specifications. We believe we continue to be well positioned to benefit from these trends given our proprietary technology alignment with Industry 4.0 trends that enables us to automate and integrate processes involved in manufacturing custom parts. The COVID-19 pandemic has also impacted the manufacturing environment. For example, the pandemic accelerated the digitization of manufacturing as companies pivoted to a work-from-home and socially distanced manufacturing plant environment. As a result, the adoption of e-commerce was accelerated, which allows opportunity for us to provide valuable solutions to manufacturers looking to build resiliency in their supply chains through fast, on-demand manufacturers. While our business may be positively affected by these trends, our results may also be favorably or unfavorably impacted by other trends that affect product developer and engineer orders for custom parts in low volumes, including, among others, economic conditions, changes in product developer and engineer preferences or needs, developments in our industry and among our competitors, and developments in our customers’ industries. For a more complete discussion of the risks facing our business, see Item 1A. “Risk Factors” of this Annual Report on Form 10-K.

Manufacturing Facilities and Capacity

We believe our combined facilities are adequate for our development and production needs in the near future. Should we need to add space or transition into new facilities, we believe we have the ability to expand our footprint on commercially reasonable terms.

Comparison of Years Ended December 31, 2022 and 2021

For the purposes of this section, the period from January 1, 2021 to December 22, 2021 is the "predecessor period", and the period from December 23, 2021 to December 31, 2021 is the 2021 "successor period". The predecessor period and the successor period collectively are referred to as the "2021 predecessor and successor periods." Amounts appearing in the remainder of this Item 7 are in 000's.

37

Revenue

Revenue was $161,141 for the year ended December 31, 2022, compared to $4,840 and $147,356, for the 2021 successor and predecessor periods, respectively. The increase of $8,945, or 5.9%, was primarily driven by our 2021 acquisitions, and 1.0% organic growth.

Gross Profit

Gross profit, or revenue less cost of revenue, was $52,518, or 32.6% of revenue, for the year ended December 31, 2022, compared to $2,115 and $57,078, or 43.7% and 38.7% of revenue, for the 2021 successor and predecessor periods, respectively. The $6,675, or 11.3%, decrease was primarily driven by higher material and labor costs of $6,913 and non-recurring amortization expense of $3,241 related to inventory step-up adjustments from Business Combination purchase accounting, partially offset by the overall increase in revenues of $3,479.

Operating Expenses

Selling, general and administrative ("SG&A") expenses were $49,869 for the year ended December 31, 2022, compared to $3,133 and $37,507 for the 2021 successor and predecessor periods, respectively. The $9,229 increase in SG&A expenses was driven by higher stock based compensation expense of $4,626, primarily due to the vesting of additional options and restricted stock units granted since the Business Combination, and additional third-party costs of $11,500 related to becoming a public company, including officer’s & director’s insurance, consulting fees, audit fees, and tax fees., partially offset by decreased salary, bonuses and commissions on $5,800.

Depreciation and amortization expenses were $18,179 for the year ended December 31, 2022, compared to $416, and $10,357 for the 2021 successor and predecessor periods, respectively. The increase of $7,406, or 68.7%, was primarily driven by a full year amortization of intangible assets related to the Business Combination.

38

Restructuring costs of $1,897 for the year ended December 31, 2022 represents costs to consolidate our Oakland, California facility into the Hartland, Wisconsin, facility, transition our finance function to a shared-service model, and consolidated a limited number of leadership roles, as announced in our reorganization plan on July 7, 2022. There were no restructuring charges during the 2021 successor and predecessor periods.

The goodwill impairment charge of $1,189,518 for the year ended December 31, 2022, represents a write down of the carrying amount of goodwill from a decrease in the Company's fair value based upon a quantitative assessment as described in Note 8 - "Goodwill and Intangible Assets, net" to our consolidated financial statements. There was no goodwill impairment charge recorded during the 2021 successor and predecessor periods.

Operating Income (Loss)

Operating loss was $1,206,945 for the year ended December 31, 2022, compared to an operating loss of $1,434 for the 2021 successor period and an operating income of $9,214 for the 2021 predecessor period. The operating loss was primarily driven by the goodwill impairment charge described in Note 8 - "Goodwill and Intangible Assets, net" to our consolidated financial statements, as well as restructuring costs, additional stock compensation, higher amortization of intangible assets related to the Business Combination, and the inventory step-up adjustment from purchase accounting.

Interest Expense and Other Expense (Income)

Interest expense was $9,015 for the year ended December 31, 2022, compared to $251 and $13,063 for the 2021 successor and predecessor periods, respectively. The decrease in interest expense of $4,299, or 32.3%, is primarily due to lower debt for the year ended December 31, 2022 compared to the 2021 predecessor period, and lower average interest rates under the Credit Agreement as compared to the 2021 Bridge Loan.

Other expenses were $350 for the year ended December 31, 2022, compared to $308, and $21,007 for the 2021 successor and predecessor periods, respectively. The decrease in other expenses of $20,965, or 98.4%, is due to non-recurring expenses related to the acquisitions that completed in the 2021 predecessor period.

Other income was $99,160 for the year ended December 31, 2022, compared to $35,460 and $5,174 for the 2021 successor and predecessor periods, respectively. The increase in other income of $58,526, or 144.0%, represents the changes in fair value in the earnout share liabilities and the warrant liability during year ended December 31, 2022 of $66,790 and $31,120, respectively. Other income for the 2021 successor period was related to the changes in fair value in the earnout share liabilities and warrant liability of $27,260, and $8,200, respectively. Other income for the 2021 predecessor period included a change in fair value of contingent consideration and a gain on PPP loan forgiveness of $3,550 and $1,624, respectively.

Income Taxes

We recorded a tax benefit of $6,662, $3, and $3,208 for 2022, the 2021 successor period and the 2021 predecessor period, respectively. Our income tax benefit for the year ended December 31, 2022 is driven by the federal income tax at the statutory rate of $234,709 partially offset by $130,499 for the non-controlling interest impact, and $104,768 related to non-tax deductible goodwill, which is not tax deductible following our goodwill impairment charges. During the 2021 predecessor period, certain subsidiaries of Fathom OpCo which were previously held as corporations for U.S. federal tax purposes, were reorganized into flow-through entities in non-taxable transactions. As a result, deferred tax liabilities pertaining to the corporate subsidiaries were reversed as income tax benefits during the 2021 predecessor period. During the 2021 successor period, the Company was in a small taxable loss position after accounting for permanent differences on income from the change in warrant liability, earnout share liability, and sponsor earnout liability. As we have assessed that deferred tax assets in the form of net operating losses are not more likely than not to be realized, no income tax benefit was recorded from the taxable loss position.

Non-GAAP Information

This Annual Report on Form 10-K includes Adjusted Net Income (Loss) and Adjusted Earnings Before Interest Taxes Depreciation and Amortization ("Adjusted EBITDA"), which are non-GAAP financial measures that we use to supplement our results presented in accordance with U.S. GAAP. We believe Adjusted Net Income (Loss) and Adjusted EBITDA are useful in evaluating our operating performance, as they are similar to measures reported by our public competitors and regularly used by security analysts, institutional investors, and other interested parties in analyzing operating performance and prospects. Adjusted Net Income (Loss) and Adjusted EBITDA are not intended to be a substitute for any U.S. GAAP financial measure and, as calculated, may not be comparable to other similarly titled measures of performance of other companies in other industries or within the same industry. These non-GAAP financial measures supplement and should be considered in addition to and not in lieu of our, U.S. GAAP results.

39

We include these non-GAAP financial measures because they are used by management to evaluate Fathom’s core operating performance and trends and to make strategic decisions regarding the allocation of capital and new investments. Adjusted EBITDA excludes certain expenses that are required in accordance with U.S. GAAP because they are non-recurring (for example, in the case of transaction-related costs), non-cash (for example, in the case of depreciation and amortization) or are not related to our underlying business performance (for example, in the case of interest income and expense).

Adjusted Net Income (Loss)

We define and calculate Adjusted Net Income (Loss) as net loss before the impact of any increase or decrease in the estimated fair value of the Company’s warrants and earnout shares as well as transaction-related costs and certain other non-cash and non-core items.

The table below presents our Adjusted Net Income (Loss) reconciled to our net income (loss), the closest U.S. GAAP measure, for the periods indicated:

(1) Represents expenses incurred related to business acquisitions;

(2) Represents legal, consulting, and auditing costs associated with the Business Combination;

(3) Represents the income statement impacts from the change in fair value related to the Sponsor Earnout Share liability, the Fathom Earnout Share liability, the Warrant liability, and the TRA liability associated with the Business Combination.

(4) Represents adjustments for other integration, non-recurring, non-operating, cash, and non-cash costs related primarily to integration costs for new acquisitions, severance, and management fees paid to our principal owner during the predecessor period.

Adjusted EBITDA

We define and calculate Adjusted EBITDA as net losses before the impact of interest income or expense, income tax expense and depreciation and amortization, and further adjusted for the following items: transaction-related costs, the impact of any increase or decrease in the estimated fair value of the Company's warrants and earnout shares, and certain other non-cash and non-core items, as described in the reconciliation included below.

40

The table below presents our Adjusted EBITDA reconciled to net income (loss), the closest U.S. GAAP measure, for the periods indicated.

(1) Represents expenses incurred related to business acquisitions;

(2) Represents legal, consulting, and auditing costs associated with the Business Combination.

(3) Represents the income statement impacts from the change in fair value related to the Sponsor Earnout Share liability, the Fathom Earnout Share liability, the Warrant liability, and the TRA liability associated with the Business Combination;

(4) Represents amounts paid to refinance debt in April 2021;

(5) Represents the change in fair value of contingent consideration payable to former owners of acquired businesses;

(6) Represents adjustments for other integration, non-recurring, non-operating, cash, and non-cash costs related primarily to integration costs for new acquisitions, severance, and management fees paid to our principal owner during the predecessor period.

Liquidity and Capital Resources

We measure liquidity in terms of our ability to fund the cash requirements of our business operations, including working capital and capital expenditure needs, contractual obligations and other commitments, with cash flows from operations and other sources of funding. Our current working capital needs relate mainly to our growth strategies, capital equipment investments, and business development efforts, as well as compensation and benefits of our employees. In addition, under our Amended Credit Agreement (as defined below), the Company is subject to various financial covenants, including quarterly net leverage and interest coverage covenants. For the period ending December 31, 2022, the Company was in compliance with the net interest coverage covenant. We did not meet the quarterly net leverage ratio for the period ending December 31, 2022, however, the lenders provided the Company with a loan covenant waiver as of and for this quarterly period. Our ability to expand and grow our business will depend on many factors, including our working capital needs and the evolution of our operating cash flows.

We had $10,713 in cash as of December 31, 2022. We believe our operating cash flows, together with amounts available under the Credit Agreement and our cash on hand will be sufficient to meet our anticipated working capital and capital expenditure requirements during the next 12 months.

41

We may, however, need additional cash resources due to changed business conditions or other developments, including unanticipated regulatory developments, significant acquisitions, and competitive pressures. Our capital expenditures in 2022 of $13,189 were approximately 8.1% of annual revenue. We believe future growth capital expenditures, excluding any expenditures for buildings and maintenance capital we might purchase for our operations, are likely to be approximately 4.0% of 2023 annual revenue. To the extent that our current resources are insufficient to satisfy our cash requirements, we may need to seek additional equity or debt financing. If the needed financing is not available, or if the terms of financing are less desirable than we expect, we may be forced to decrease our level of investment in new product launches and related marketing initiatives or to scale back our existing operations, which could have an adverse impact on our business and financial prospects.

Borrowings and Lines of Credit

On December 23, 2021, the Company entered into a new Credit Agreement (the "New Credit Agreement", which included a $50,000 revolving credit facility and a $125,000 term loan. The Company's borrowings under the revolving credit facility were $37,000 at December 31, 2022. The loans obtained under these facilities will mature in December 2026.

As previously disclosed, the New Credit Agreement was amended as of November 10, 2022 (the New Credit Agreement, as so amended, the “Amended Credit Agreement” or "First Amendment"). Specifically, the Amendment (i) reduced the minimum interest coverage ratio from 3.00 to 1.0 to 2.50 to 1.0 for each fiscal quarter ending in fiscal 2023, to 2.75 to 1.0 for the fiscal quarters ending on March 31, 2024 and June 30, 2024, with the minimum interest coverage ratio reverting back to 3.00 to 1.0 for each fiscal quarter ending on and after September 30, 2024, (ii) increased the maximum net leverage ratio to 4.50 to 1.0 for each fiscal quarter ending on September 30, 2022 through June 30, 2023, which ratio will decrease thereafter over time until it reaches 3.50 to 1.0 for each fiscal quarter ending on and after June 30, 2024, and (iii) prohibits certain restricted payments by the Company otherwise permitted by Section 6.06(g) of the Amended Credit Agreement through September 30, 2024.

The Amendment also replaces the Adjusted LIBO Rate (e.g., LIBO Rate multiplied by the then applicable statutory reserve rate per annum), plus a range of applicable margins, as an interest election under the Amended Credit Agreement, with Term SOFR plus 0.10% (“Adjusted Term SOFR”) per annum and Daily Simple SOFR plus 0.10% per annum, as applicable, in each case plus an applicable margin adjustment ranging from 2.25% to 3.75% based on the Company’s most recent net leverage ratio calculation as of the applicable interest determination date.

In addition, the Amendment replaces the Adjusted LIBO Rate plus 1.00% per annum as one of the interest rate floors applied in determining the alternate base interest rate for ABR Loans (as defined in the Amended Credit Agreement), with Adjusted Term SOFR plus 1.00% per annum. Lastly, the Amendment provides that the applicable margin applicable to ABR Loans increase to 2.75% to the extent the Company’s net leverage ratio equals or exceeds 4.00 to 1.0 on the applicable date.

In connection with the preparation and execution of the Amendment, the Company paid customary arranger and lender consent fees, and reasonable and documented expenses of the Administrative Agent.

The foregoing description of the Amendment and the Amended Credit Agreement is a summary and is qualified in its entirety by reference to the full text of the Amendment and the Amended Credit Agreement, which is attached to this Quarterly Report as Exhibit 10.1 and incorporated herein by reference.

On March 24, 2023, the Company entered into an amendment of the Amended Credit Agreement (as amended by the Second Amendment, the “Second Amended Credit Agreement" or “Second Amendment”) with the administrative agent thereof (the “Administrative Agent”) and the other lenders party thereto to modify certain financial covenants. References in this Annual Report to the “Credit Agreement” means the New Credit Agreement, the Amended Credit Agreement or the Second Amended Credit Agreement, as the context requires.

42

Specifically, the Second Amendment (i) suspends, through the fiscal quarter ending on December 31, 2023, applicability of the interest coverage ratio covenant, and reduces the interest coverage ratio from 2.00 to 1.00 for the fiscal quarters ending on March 31, 2024 and June 30, 2024, from 2.25 to 1.00 for the fiscal quarter ending on September 30, 2024, from 2.50 to 1.00 for the fiscal quarter ending on December 31, 2024, and from 3.00 to 1.00 for the fiscal quarter ending on March 31, 2025 and each fiscal quarter thereafter, (ii) suspends through the fiscal quarter ending on December 31, 2023 applicability of the net leverage ratio covenant, and reduces the net leverage ratio from 5.00 to 1.00 for the fiscal quarter ending on March 31, 2024, from 4.75 to 1.00 for the fiscal quarter ending on June 30, 2024, from 4.50 to 1.00 for the fiscal quarter ending on September 30, 2024, from 4.00 to 1.00 for the fiscal quarter ending on December 31, 2024, and from 3.50 to 1.00 for the fiscal quarter ending on March 31, 2025 and each fiscal quarter thereafter, (iii) establishes a new quarterly Minimum EBITDA financial covenant of $3,100 for the three months ending on March 31, 2023, $8,750 for the six months ending on June 30, 2023, $16,750 for the nine months ending on September 30, 2023, and $24,400 for the year ending on December 31, 2023 (excluding for purposes of this covenant adjustments otherwise made pursuant to clauses (xii) through (xviii) of the definition thereof in the Second Amended Credit Agreement), (iv) establishes a new minimum Liquidity covenant (as defined in the Second Amended Credit Agreement) of at least $13,500 on the last day of any month ending on or after March 31, 2023 through and including December 31, 2024, and (v) prohibits certain investments and restricted payments by the Company otherwise permitted by Article VI of the Second Amended Credit Agreement through December 31, 2024. Under the Amended Credit Agreement the Company is subject to various financial covenants, including quarterly net leverage and interest coverage. For the period ending December 31, 2022, the Company was in compliance with the net interest coverage covenant. We did not meet the quarterly net leverage ratio for the period ending December 31, 2022, however, the lenders provided the Company with a loan covenant waiver as of and for the three months ended December 31, 2022.

In connection with the preparation and execution of the Second Amendment, the Company paid $524 in customary arranger and lender consent fees, and reasonable and documented expenses of the Administrative Agent.

The foregoing description of the Second Amendment and the Second Amended Credit Agreement is a summary and is qualified in its entirety by reference to the full text of the Second Amendment and the Second Amended Credit Agreement, which is attached to this Annual Report as Exhibit 10.7 and incorporated herein by reference.

The Company recorded deferred financing costs for 2022, and the 2021 Successor Period of $411, and $1,828, respectively. in conjunction with the Credit Agreement and the applicable principal balances are presented within Long-Term debt, net on the Company's Consolidated Balance Sheets. The Company amortizes the deferred financing costs using the effective interest method.

The revolving credit facility under the Credit Agreement is available for working capital and other general corporate purposes and includes a letter of credit sub-facility of up to $5,000. The Credit Agreement also includes an uncommitted incremental facility, which, subject to certain conditions, provides for additional term loan facilities, and/or an increase in commitments under the revolving credit facility, in an aggregate amount of up to $100,000.

Tax Receivable Agreement

In connection with the Business Combination, we entered into the TRA with certain of our pre-Business Combination owners that provides for the payment by Fathom to such owners of 85% of the benefits that Fathom is deemed to realize as a result of the Company’s share of existing tax basis acquired in the Business Combination and other tax benefits related to entering into the TRA.

Actual tax benefits realized by Fathom may differ from tax benefits calculated under the TRA as a result of the use of certain assumptions in the TRA, including the use of an assumed weighted-average state and local income tax rate to calculate tax benefits. While the amount of existing tax basis, the anticipated tax basis adjustments and the actual amount and utilization of tax attributes, as well as the amount and timing of any payments under the TRA, will vary depending upon a number of factors, we expect that the payments that Fathom may make under the TRA will be approximately $79,000 based on the Company's closing share price of $1.32 at December 31, 2022. As of December 31, 2022, we do not expect to make any material payments within the next two years, and anticipate payments to become more material beginning in 2025.

On April 4, 2023, the Tax Receivable Agreement was amended and restated by Fathom and the CORE Investors, which hold a controlling interest in Fathom. The purpose of the amendment was (i) the technical correction of an inadvertent omission from the original Tax Receivable Agreement of certain intended tax benefits to affiliates of the CORE Investors which directly or indirectly owned interests in Fathom OpCo prior to the Business Combination through entities taxed as C-corporations and (ii) to replace LIBOR with SOFR as the reference interest rate in the agreement for the several interest rates applicable under the agreement. The correction described in clause (i) of the immediately preceding sentence did not affect Fathom’s accounting for the Tax Receivable Agreement. A copy of the Amended and Restated Tax Receivable Agreement is filed as Exhibit 10.1 to this Annual Report and incorporated herein by reference.

43

Cash Flow Analysis

Operating Activities

Net cash provided by operating activities was $3,080 for the year ended December 31, 2022, compared to $521 and $7,223 for the 2021 successor and predecessor periods, respectively. This decrease of $4,664 is primarily due to higher operating loss, and increased working capital requirements,

Investing Activities

Cash used in investing activities was $13,189 for the year ended December 31, 2022, compared to $0 and $76,400 for the 2021 successor and predecessor periods, respectively. The decrease of $63,211 was driven by a reduction of the overall cash used in acquisitions by Fathom OpCo for the 2021 predecessor period of $67,428, compared to $0 cash used for acquisitions by Fathom for the year ended December 31, 2022, partially offset by an increase in capital expenditures for the year ended December 31, 2022 of $13,189, compared to $8,972 for the 2021 successor and predecessor periods combined.

Financing Activities

Cash provided by financing activities was $572 for the year ended December 31, 2022, compared to $0 and $70,566 for the 2021 successor and predecessor periods, respectively. Proceeds provided by financing activities for the year ended December 31, 2022 came from a $10,000 draw on the revolver facility, and proceeds from issuance of common stock under our ESPP, partially offset by principal payments on our Term Loan of $3,125, tax payments for employee shares withheld in lieu of taxes of $2,976, debt financing fees of $411 related to the Amended Credit Agreement, and contingent consideration payments of $2,750. The cash provided by financing activities for the 2021 predecessor period was driven by the proceeds related to the 2021 Bridge Loan of $183,500, partially offset by payments on the 2021 Term Loan and extinguishment of the 2020 credit facilities of $104,091.

Critical Accounting Policies and Use of Estimates

Preparation of our financial statements requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues, and expenses. See Note 2—Significant Accounting Policies in the accompanying notes to our consolidated financial statements which describes the significant accounting policies used in preparation of the consolidated financial statements. We believe that the most complex and sensitive judgments, because of their potential significance to the consolidated financial statements, result primarily from the need to make estimates about the effects of matters that are inherently uncertain and are described subsequently. Actual results could differ from management’s estimates.

Business Combinations

We account for business acquisitions in accordance with Accounting Standards Codification ("ASC") 805, Business Combinations ("ASC 805"). We measure the cost of an acquisition as the aggregate of the acquisition date fair values of the assets transferred and liabilities assumed and equity instruments issued. Transaction costs directly attributable to the acquisition are expensed as incurred. We record goodwill for the excess of (i) the total costs of acquisition, fair value of any non-controlling interests and acquisition date fair value of any previously held equity interest in the acquired business over (ii) the fair value of the identifiable net assets of the acquired business.

44

The acquisition method of accounting requires us to exercise judgment and make estimates and assumptions based on available information regarding the fair values of the elements of a business combination as of the date of acquisition, including the fair values of identifiable intangible assets, deferred tax asset valuation allowances, liabilities related to uncertain tax positions and contingencies. We must also refine these estimates over a one-year measurement period, to reflect any new information obtained about facts and circumstances that existed as of the acquisition date that, if known, would have affected the measurement of the amounts recognized as of that date. If we are required to retroactively adjust provisional amounts that we have recorded for the fair value of assets and liabilities in connection with an acquisition, these adjustments could materially impact our results of operations and financial position. Estimates and assumptions that we must make in estimating the fair value of future acquired technology, user lists and other identifiable intangible assets include future cash flows that we expect to generate from the acquired assets. If the subsequent actual results and updated projections of the underlying business activity change compared with the assumptions and projections used to develop these values, we could record impairment charges. In addition, we estimate the economic lives of certain acquired assets and these lives are used to calculate depreciation and amortization expense. If our estimates of the economic lives change, depreciation or amortization expenses could be accelerated or slowed, which could materially impact our results of operations.

Goodwill and Intangible Assets

We recognize goodwill in accordance with ASC 350, Intangibles—Goodwill and Other ("ASC 350"). Goodwill is the excess of cost of an acquired entity over the fair value amounts assigned to assets acquired and liabilities assumed in a business combination. Goodwill is not amortized.

As a result of sustained decreases in the Company’s publicly quoted share price, lower market multiples for a relevant peer group, and challenging macroeconomic conditions, the Company concluded during the third quarter that there were impairment indicators and conducted a quantitative goodwill impairment assessment, including additional testing of its definite-lived intangibles, and other long-lived assets as of September 30, 2022. As a result of this assessment, the Company did not identify an impairment to its definite-lived intangible assets or other long-lived assets, but the Company recorded a $1,066,564 non-deductible, non-cash goodwill impairment charge for the three and nine months ended September 30, 2022 in our unaudited consolidated statements of comprehensive income (loss). During the fourth quarter the Company's stock price experienced an additional sustained decline, and the Company evidenced further deterioration in the macroeconomic conditions, triggering a further impairment analysis as of December 31, 2022. As a result of this assessment the Company did not identify an impairment to its definite-lived intangible assets or other long-lived assets, but it did result in the recognition of an additional impairment charge for the remaining goodwill of $122,954 for the quarter ended December 31, 2022, in our consolidated statements of comprehensive loss. There were no goodwill impairment charges for the 2021 Successor Period and 2021 Predecessor Period.

The Company estimated the fair value of the Company using an equal allocation between the discounted cash flow method under the income approach and the public company guideline method under the market approach. The significant assumptions used in the valuation include revenue growth rates, future gross profit margins and operating expenses used to calculate projected future cash flows, determination of the weighted average cost of capital, and future economic and market conditions. The terminal value is based on an exit revenue multiple which requires significant assumptions regarding the selections of appropriate multiples that consider relevant market trading data. The Company bases its estimates and assumptions on its knowledge of the digital manufacturing industry, recent performance, expectations of future performance and other assumptions the Company believes to be reasonable.

We recognize intangibles assets in accordance with ASC 350. Acquired intangible assets subject to amortization are stated at fair value and are amortized using the straight-line method over the estimated useful lives of the assets. Intangible assets that are subject to amortization are reviewed for potential impairment whenever events or circumstances indicate that carrying amounts may not be recoverable. Assets not subject to amortization are tested for impairment at least annually. As of December 31, 2022 and December 31, 2021, no impairment charges for intangible assets have been recognized.

The estimates of fair value are based on the best information available as of the date of the assessment, which primarily incorporates management assumptions about expected future cash flows. Although these assets are not currently impaired, there can be no assurance that future impairments will not occur. See Note 3—Business Combination with Fathom OpCo, Note 4 - Fathom OpCo Predecessor Period Acquisitions, and Note 8—Goodwill and Intangible Assets in the accompanying notes to the consolidated financial statements for more information.

45

Revenue Recognition from Contracts with Customers

The Company accounts for revenue under ASC Topic 606, Revenue from Contracts with Customer's ("ASC 606"). Most of the Company’s revenue has one performance obligation and is recognized on a point-in-time basis upon shipment. Over the course of 2022, we were not able to support overtime revenue recognition for customer contracts within our injection molding business and transitioned to recognizing revenue on a point in time basis upon shipment. This change in revenue recognition is immaterial to the overall financial statements in all periods included in this Form 10-K. The Company’s payments terms are consistent with industry standards and never exceed 12 months.

Contingent Liabilities

Our contingent liabilities, which are included within the “Other non-current liabilities” caption on our consolidated balance sheets, are uncertain by nature and their estimation requires significant management judgment as to the probability and estimation of the amount of liability. These contingencies include, but may not be limited to, warrants, TRA liabilities, earnout shares, litigation, and management’s evaluation of complex laws and regulations, including those relating to indirect taxes, and the extent to which they may apply to our business and industry. See Note 19 - Fair Value Measurement and Note 20 - Commitments and Contingencies in the accompanying notes to our consolidated financial statements for more information.

We regularly review our contingencies to determine whether the likelihood of a liability is probable and to assess whether a reasonable estimate of the liability can be made. Determination of whether a liability estimate can be made is a complex undertaking that considers the judgement of management, third-party research, the prospect of negotiation and interpretations by regulators and courts, among other information. When liabilities can be reasonably estimated, an estimated contingent liability is recorded. We continually reevaluate our indirect tax and other positions for appropriateness.

Shared Based Compensation

Our historical and outstanding stock-based compensation awards, including the issuances of options and other stock awards under our equity compensation plans, have typically included service-based or performance-based vesting conditions. For awards with only service-based vesting conditions, we record compensation cost for these awards using the straight-line method over the vesting period. For awards with performance-based vesting conditions, we recognize compensation cost on a tranche-by-tranche basis.

Share based compensation expense is measured based on the grant-date fair value of the share based awards and is recognized over the requisite service period of the awards. We use the Black-Scholes option pricing model to value our stock option awards. The Black-Scholes model requires management to make a number of key assumptions, including expected volatility, expected term, risk-free interest rate and expected dividends. The risk-free interest rate is estimated using the rate of return on U.S. treasury notes with a life that approximates the expected term. The expected term assumption used in the Black-Scholes model represents the period of time that the options are expected to be outstanding and is estimated using the midpoint between the requisite service period and the contractual term of the option.

The assumptions underlying these valuations represent management’s best estimates, which involve inherent uncertainties and the application of management judgment. As a result, if factors or expected outcomes change and our management uses significantly different assumptions or estimates, our stock-based compensation expense for future periods could be materially different, including as a result of adjustments to share based compensation expense recorded for prior period.

Earnout Shares Liabilities and Warrant Liability

The fair values of the Sponsor earnout shares liability, Fathom earnout shares liability, and Warrants liability were determined using Monte Carlo simulations that have various significant unobservable inputs. The assumptions used could have a material impact on the valuation of these liabilities, and include our best estimate of expected volatility, expected holding periods and appropriate discounts for lack of marketability. Changes in the estimated fair values of these liabilities may have material impacts on our results of operations in any given period, as any increases in these liabilities have a corresponding negative impact on our U.S. GAAP results of operations in the period in which the changes occur. See Note 3 - Business Combination with Fathom OpCo and Note 9 - Warrant Liability in the accompanying notes to our consolidated financial statements for more information.

46

Impact of Changes in Accounting on Recent and Future Trends

In February 2016, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2016-02, Leases ("Topic 842") Section A - Leases: Amendments to the FASB Accounting Standards Codification ("ASC"). The standard requires lessees to recognize the assets and liabilities arising from leases on the balance sheet and retains a distinction between classification of leases. The classification criteria for distinguishing between finance leases and operating leases are substantially similar to the classification criteria for distinguishing between capital leases and operating leases in the previous lease guidance. The Company adopted this standard and related amendments in the first quarter of 2022, using the modified retrospective approach. Using the modified retrospective approach, the Company determined an incremental borrowing rate at the date of adoption based on the total lease term and total minimum rental payments.

The modified retrospective approach provides a method for recording existing leases at adoption with a cumulative adjustment to retained earnings. The Company elected the package of practical expedients, which permits the Company to not reassess (1) whether any expired or existing contracts are or contain leases, (2) the lease classification for any expired or existing leases, and (3) any initial direct costs for any expired or existing leases as of the effective date. The Company also elected the practical expedient to not allocate lease considerations between lease and non-lease components for real estate leases. As such, real estate lease considerations are treated as a single lease-component and accounted for accordingly. The Company excludes leases with an initial term of 12 months or less from the application of Topic 842.

Adoption of the new standard resulted in the recording of $3,122 and $8,195 of current lease liabilities and long-term lease liabilities, respectively, and $11,986 in corresponding right-of-use lease assets. The difference between the approximate value of the right-of-use lease assets and lease liabilities is attributable to future rent escalations. The cumulative change in the beginning accumulated deficit was $82 due to the adoption of Topic 842. There was no material impact on the Company’s consolidated statement of comprehensive loss or consolidated statement of cash flows. The Company’s comparative periods continue to be presented and disclosed in accordance with previous lease guidance.

Emerging Growth Company Accounting Election

Section 102(b)(1) of the Jumpstart Our Business Startups Act of 2012 (“JOBS Act”) exempts emerging growth companies from being required to comply with new or revised financial accounting standards until private companies are required to comply with the new or revised financial accounting standards. The JOBS Act provides that a company can choose not to take advantage of the extended transition period and comply with the requirements that apply to non-emerging growth companies, and any such election to not take advantage of the extended transition period is irrevocable. Altimar II was an emerging growth company as defined in Section 2(a) of the Securities Act of 1933, as amended, and has elected to take advantage of the benefits of this extended transition period. Fathom is expected to remain an emerging growth company at least through the end of the 2023 and is expected to continue to take advantage of the benefits of the extended transition period. This may make it difficult or impossible to compare Fathom financial results with the financial results of another public company that is either not an emerging growth company or is an emerging growth company that has chosen not to take advantage of the extended transition period exemptions for emerging growth companies because of the potential differences in accounting standards used.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk.

We are exposed to market risk in the form of changes in interest rates, foreign currency exchange rates and commodity prices for raw materials. We may, from time to time, enter into derivative financial instruments to manage these risks; however, we do not utilize such instruments or contracts for speculative or trading purposes. In the event that we enter into a derivative financial instrument, it is possible that such future dated contracts could no longer serve as a hedge if the projected cash flow does not occur as anticipated at the time of contract initiation.

Interest Rate Risk

We are exposed to interest rate risks as a result of our borrowing and investing activities, which principally includes long-term borrowings, used to maintain liquidity and to fund our business operations and capital requirements. We have a $125.0 million term loan and a $50.0 million revolving credit facility that allows for borrowings at a variable interest rate. As of December 31, 2022 we had $37.0 million in outstanding borrowings on the revolving credit facility. We may enter into interest rate swaps from time to time to manage our mix of fixed and variable interest rate debt effectively. As of December 31, 2022 and 2021, there were no interest rate swaps or other derivative instruments in place. The nature and amount of our long-term debt may vary from time to time as a result of business requirements, market conditions and other factors.

Commodity Price Risk

We continually address the impact of changes in commodity prices on our results of operations and cash flow. Our exposure to changes in commodity prices is principally indirect as we do not directly purchase exchange-traded commodities, but rather

47

purchase raw materials that are a result of further downstream processing, primarily inputs resulting from processing crude oil, natural gas, iron ore, gold, silver and copper. We generally manage the risk of changes in commodity prices that impact our raw material costs by seeking to (i) offset increased costs through increases in prices, (ii) alter the nature and mix of raw materials used to manufacture our finished goods or (iii) enter into commodity-linked sales or purchase contracts, all to the extent possible based on competitive and other economic factors. We may also from time to time enter into derivative financial instruments to mitigate such impact however, as of December 31, 2022 and 2021 we had no derivative financial instruments in place.

Item 8. Financial Statements and Supplementary Data.

Our consolidated financial statements and the related notes, together with the Report of the Independent Registered Public Accounting Firm thereon, are set forth below in the F-pages of this Annual Report on Form 10-K and are incorporated herein by reference.

Item 9. Changes in and Disagreements With Accountants on Accounting and Financial Disclosure.

Not applicable.

Item 9A. Controls and Procedures.

Evaluation of Disclosure Controls and Procedures

The Company’s management, with the participation of our Chief Executive Officer and our Chief Financial Officer, our principal executive officer and principal financial officer, respectively, have evaluated the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act) as of December 31, 2022.

Disclosure controls and procedures are controls and other procedures that are designed to ensure that information required to be disclosed in our reports filed or submitted under the Exchange Act is recorded, processed, summarized, and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include controls and procedures designed to ensure that information required to be disclosed in our reports filed under the Exchange Act is accumulated and communicated to management, including our President and Chief Executive Officer and our Chief Financial Officer, to allow timely decisions regarding required disclosure.

Based on the evaluation of our disclosure controls and procedures, our President and Chief Executive Officer and our Chief Financial Officer concluded that our disclosure controls and procedures were not effective as of December 31, 2022, due to the material weaknesses in our internal control over financial reporting described below.

Management’s Report on Internal Control over Financial Reporting

The Company’s management is responsible for establishing and maintaining an adequate system of internal control over financial reporting, as defined in the Exchange Act Rules 13a-15(f). Management conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework established by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control – Integrated Framework (2013 framework).

As a result of this evaluation, management has concluded that, as of December 31, 2022, our internal control over financial reporting was not effective due to the material weaknesses in internal control over financial reporting described below. As an emerging growth company, the Company is not required to include an attestation report on internal control over financial reporting issued by our independent registered public accounting firm in this Annual Report on Form 10-K.

A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the Company's annual or interim consolidated and financial statements will not be prevented or detected on a timely basis.

48

Remediated Material Weaknesses in Internal Control over Financial Reporting

Remediation of previously identified material weakness and the strengthening of our internal controls over financial reporting environment was a priority of the Company during 2022. The Company implemented and tested the design and operating effectiveness of new and existing controls related to the previously identified material weaknesses, as follows:

During the fourth quarter of 2022, the Company completed testing of the operating effectiveness of the implemented controls and found them to be effective. As a result, the Company has concluded the material weakness has been remediated as of December 31, 2022.

During the fourth quarter of 2022, the Company completed testing of the operating effectiveness of the implemented controls and found them to be effective. As a result, the Company has concluded the material weakness has been remediated as of December 31, 2022.

During the fourth quarter of 2022, the Company completed testing of the operating effectiveness of the implemented controls and found them to be effective. As a result, the Company has concluded the material weakness has been remediated as of December 31, 2022.

Material Weaknesses in Internal Control over Financial Reporting

As of December 31, 2022, based on the Company’s implementation of a structured internal controls design and testing process during 2022, we continue to have material weaknesses in certain components of the 2013 COSO framework, including the control environment and control activities.

49

These material weaknesses could result in a misstatement of account balances or disclosures that would result in a material misstatement to the annual or interim financial statements that would not be prevented or detected.

In light of the material weakness described above, we performed additional analysis and other post-closing procedures to ensure our financial statements were prepared in accordance with U.S. GAAP. Accordingly, we believe that the consolidated financial statements included in this report fairly present, in all material respects, our financial condition, results of operations and cash flows for the periods presented.

Remediation Plan

The Company has a remediation plan for the identified material weaknesses that will dedicate resources and priority to accounting and finance reporting controls over revenue, expenditures, income taxes, and inventory. The remediation plan includes the implementation of companywide policies and procedures for critical accounting areas including revenue and inventory, the enhancement of our documentation retention policy and training for employees on internal controls over financial reporting.

The remediation actions are subject to ongoing senior management review, as well as Audit Committee oversight. The Company will not be able to conclude whether the steps to be taken will fully remediate the material weaknesses in internal controls over financial reporting until remediation efforts are completed, tested, and evaluated for effectiveness. Until these weaknesses are remediated, the Company plans to continue to perform additional analyses and other mitigating procedures to ensure that the consolidated financial statements are prepared in accordance with U.S. GAAP.

Changes in Internal Control Over Financial Reporting

Except for the matters discussed previously, there were no other changes in the Company’s internal control over financial reporting that occurred during our most recently completed fiscal quarter ended December 31, 2022, that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Item 9B. Other Information.

On April 4, 2023, the Tax Receivable Agreement was amended and restated (the “Amended and Restated Tax Receivable Agreement”) by Fathom and the CORE Investors, which hold a controlling interest in Fathom. The purpose of the amendment and restatement was (i) the technical correction of an inadvertent omission from the original Tax Receivable Agreement of certain intended tax benefits to affiliates of the CORE Investors which directly or indirectly owned interests in Fathom OpCo prior to the Business Combination through entities taxed as C-corporations and (ii) to replace LIBOR with SOFR as the reference interest rate in the agreement for the several interest rates applicable under the agreement. The correction described in clause (i) of the immediately preceding sentence did not affect Fathom’s prior accounting for the Tax Receivable Agreement.

The Amended and Restated Tax Receivable Agreement was reviewed and approved by Fathom’s Audit Committee in accordance with Fathom’s related person transaction policy because the CORE Investors are “Related Persons” as defined under the policy and the amount of benefits potentially involved under the agreement exceeds $120,000.

50

The foregoing description is only a summary of certain provisions of the Amended and Restated Tax Receivable Agreement and is qualified in its entirety by reference to the Amended and Restated Tax Receivable Agreement, a copy of which is filed as Exhibit 10.1 to this Annual Report and incorporated herein by reference.

Item 9C. Disclosure Regarding Foreign Jurisdictions that Prevent Inspections.

Not applicable.

51

PART III

Item 10. Directors, Executive Officers, and Corporate Governance.

The following information will be included in Fathom’s Proxy Statement related to its 2023 Annual Meeting of Stockholders to be filed in definitive form within 120 days after Fathom’s fiscal year end of December 31, 2022 (the “Proxy Statement”) and is incorporated herein by reference:

Item 11. Executive Compensation.

The following information will be included in the Proxy Statement and is incorporated herein by reference:

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

The following information will be included in the Proxy Statement and is incorporated herein by reference:

Item 13. Certain Relationships and Related Transactions, and Director Independence.

The following information will be included in the Proxy Statement and is incorporated herein by reference:

Item 14. Principal Accountant Fees and Services.

Information regarding principal accountant fees and services is set forth under the sections in the Proxy Statement entitled “Fees Paid to Independent Registered Public Accounting Firm” and “Proposal No. 2 – Ratification of Retention of Independent Registered Public Accounting Firm,” which information is incorporated herein by reference.

52

PART IV

Item 15. Exhibits and Financial Statement Schedules.

See Index to Financial Statements on page F-1.

Schedules not listed have been omitted because the information required to be set forth therein is not applicable or is included in the consolidated financial statements or the related notes.

Item 16. Form 10-K Summary.

None.

53

Exhibit Index

54

* Filed herewith.

# Indicates a management plan or compensatory arrangement.

† Certain of the exhibits and schedules to this Exhibit have been omitted in accordance with Regulation S-K Item 601(a)(5). The Registrant agrees to furnish a copy of all omitted exhibits and schedules to the SEC upon its request.

55

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, as amended, the registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.

Power of attorney

Each person whose signature appears below appoints Ryan Martin and Mark Frost, and each of them, any of whom may act without the joinder of the other, as his or her true and lawful attorneys-in-fact and agents, with full power of substitution and re-substitution, for him or her and in his name, place and stead, in any and all capacities, to sign any and all amendments to this Annual Report on Form 10-K, and to file the same, with all exhibits thereto, and all other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents full power and authority to do and perform each and every act and thing requisite and necessary to be done, as fully to all intents and purposes as he or she might or would do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents or any of them or their or his substitute or substitutes, may lawfully do or cause to be done by virtue hereof .

Pursuant to the requirements of the Securities Exchange Act of 1934, as amended, this Annual Report on Form 10-K has been signed below by the following persons on behalf of registrant and in the capacities indicated below as of April 7, 2023.

56

INDEX TO FINANCIAL STATEMENTS