FLEX LTD. - Annual Report: 2013 (Form 10-K)

Use these links to rapidly review the document
TABLE OF CONTENTS

Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

Form 10-K

Commission file number 000-23354

FLEXTRONICS INTERNATIONAL LTD.
(Exact name of registrant as specified in its charter)

Registrant's telephone number, including area code
(65) 6890 7188

         Securities registered pursuant to Section 12(b) of the Act:

         Securities registered pursuant to Section 12(g) of the Act—NONE

         Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ý    No o

         Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes o    No ý

         Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý    No o

         Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ý    No o

         Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of the registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    ý

         Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.

         Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o    No ý

         As of September 28, 2012, the aggregate market value of the Company's ordinary shares held by non-affiliates of the registrant was approximately $4.0 billion based upon the closing sale price as reported on the NASDAQ Stock Market LLC (NASDAQ Global Select Market).

         Indicate the number of shares outstanding of each of the registrant's classes of common stock, as of the latest practicable date.

DOCUMENTS INCORPORATED BY REFERENCE

Table of Contents

TABLE OF CONTENTS

2

Table of Contents

PART I

FORWARD-LOOKING STATEMENTS

        Unless otherwise specifically stated, references in this report to "Flextronics," "the Company," "we," "us," "our" and similar terms mean Flextronics International Ltd. and its subsidiaries.

        Except for historical information contained herein, certain matters included in this annual report on Form 10-K are, or may be deemed to be forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934 and Section 27A of the Securities Act of 1933. The words "will," "may," "designed to," "believe," "should," "anticipate," "plan," "expect," "intend," "estimate" and similar expressions identify forward-looking statements, which speak only as of the date of this annual report. These forward-looking statements are contained principally under Item 1, "Business," and under Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations." Because these forward-looking statements are subject to risks and uncertainties, actual results could differ materially from the expectations expressed in the forward-looking statements. Important factors that could cause actual results to differ materially from the expectations reflected in the forward-looking statements include those described in Item 1A, "Risk Factors" and Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations." In addition, new risks emerge from time to time and it is not possible for management to predict all such risk factors or to assess the impact of such risk factors on our business. Given these risks and uncertainties, the reader should not place undue reliance on these forward-looking statements. We undertake no obligation to update or revise these forward-looking statements to reflect subsequent events or circumstances.

3

Table of Contents

ITEM 1.    BUSINESS

OVERVIEW

        We are a globally-recognized leading provider of end-to-end, global supply chain solutions through which we design, build, ship and service a complete packaged electronic product to original equipment manufacturers ("OEMs") in the following markets:

•

High Reliability Solutions ("HRS"), which is comprised of our medical, automotive, defense and aerospace businesses;



•

High Velocity Solutions ("HVS"), which includes our mobile devices business, including smart phones, and consumer electronics, including game consoles, high-volume computing business, including notebook personal computing ("PC"), tablets and printers;



•

Industrial and Emerging Industries ("IEI"), which is comprised of our large household appliances, equipment, and emerging industries businesses; and



•

Integrated Network Solutions ("INS"), which includes our telecommunications infrastructure, data networking, connected home, and server and storage businesses.

        We provide our advanced design, manufacturing and services through a network of facilities in over 30 countries across four continents. We have established this extensive network of manufacturing facilities in the world's major electronics markets (Asia, the Americas and Europe) in order to serve the outsourcing needs of both multinational and regional OEMs. Our services increase customer competitiveness by delivering improved product quality, leading manufacturability, improved performance, faster time-to-market and reduced costs. Our OEM customers leverage our services to meet their requirements throughout their products' entire life cycles. For the fiscal year ended March 31, 2013, we had revenue of $23.6 billion and net income of $277.1 million.

        We believe that the combination of our extensive design and engineering services, significant scale and global presence, end-to-end services, advanced supply chain management, industrial parks in low-cost geographic areas and operational track record provide us with a competitive advantage in the market for designing, manufacturing and servicing electronics products for leading multinational and regional OEMs. Through these services and facilities, we offer our OEM customers the ability to simplify their global product development, their manufacturing process, their after sales services and enable our OEM customers to achieve meaningful reductions to time-to-market and costs.

        Our business has been subject to seasonality primarily due to our mobile devices market and our consumer devices market, which historically exhibit particular strength in the two quarters leading up to the end of the calendar year in connection with the holiday season.

INDUSTRY OVERVIEW

        Our expertise is in the design, manufacturing and services for a broad range of products, and as such, the closest definition of our industry is the outsourcing Electronics Manufacturing Services ("EMS") industry. EMS has experienced significant change and growth as an increasing number of companies elected to outsource some or all of their design, manufacturing, and distribution requirements. We have seen an increase in global OEM manufacturing demand since the 2001 - 2002 technology downturn as more and more OEMs pursued the benefits of outsourcing rather than internal manufacturing. Due to the global economic crisis, which began in late calendar year 2007 and continued through the end of our fiscal year 2010, many of our OEM customers reduced their manufacturing and supply chain outsourcing which negatively impacted our business. In fiscal year 2011, we began seeing some positive signs that demand for our OEM customers' end products was improving, and this trend continued through the end of our 2012 fiscal year. However our revenue in fiscal year 2013 declined compared to that of the prior year, primarily due to our exit from the high

4

Table of Contents

volume and low margin Original Design and Manufacturing ("ODM") PC business last year. The EMS industry has not fully recovered from the last macro-economic downturn and as a result, during fiscal 2013 the Company initiated certain restructuring activities intended to improve operational efficiencies. The growth of the overall industry for calendar 2012 is estimated to have been greater than 4%.

        We believe the total available market for outsourcing EMS continues to offer opportunities for growth with current penetration rates estimated to be less than 23%. The intensely competitive nature of the electronics industry, the continually increasing complexity and sophistication of electronics products, pressure on OEMs to reduce product costs and shorter product life cycles encourage OEMs to utilize broad manufacturing and service providers as part of their business and manufacturing strategies. Utilizing global manufacturing and service providers allows OEMs to take advantage of the global design, manufacturing and supply chain management expertise of such providers, and enables OEMs to concentrate on product research, development, marketing and sales. We believe that OEMs realize the following benefits through their strategic relationships with manufacturing and service providers:

•

Reduced production costs;



•

Reduced design and development costs and lead time;



•

Accelerated time-to-market and time-to-volume production;



•

Reduced capital investment requirements and fixed costs;



•

Improved inventory management and purchasing power;



•

Access to worldwide design, engineering, manufacturing, and after-market service capabilities; and



•

Ability to focus on core branding and R&D initiatives.

        We believe that growth in the EMS industry will be driven largely by the needs of OEMs to respond to rapidly changing markets and technologies and to reduce product costs. Additionally, we believe that there are significant opportunities for global manufacturing and service providers to win additional business from OEMs in certain markets or industry segments that have yet to substantially utilize such providers.

SERVICE OFFERINGS

        We offer a broad range of customer-tailored services to OEMs. We believe that Flextronics has the broadest worldwide capabilities in the industry, from design resources to end-to-end global supply chain services. We believe a key competitive advantage is our ability to provide more value and innovation to our customers because we offer both global economies of scale in procurement, manufacturing and after-market services, as well as market-focused expertise and capabilities in design and engineering. As a result of our focus on specific markets, we believe we are able to better understand complex market dynamics and anticipate trends that impact our OEM customers' businesses, and can help improve our OEM customers' market positioning by effectively adjusting product plans and roadmaps to deliver low-cost, high quality products and meet their time-to-market requirements. Our services allow us to design, build, ship and service a complete packaged electronics product for our OEM customers. These services include:

        Design and Engineering Services.     We offer a comprehensive range of value-added design and engineering services that are tailored to the various markets and needs of our customers. These services can be delivered by three primary business models:

•

Contract Design Services, where the customer purchases engineering and development services on a time and materials basis;

5

Table of Contents

•

Joint Development Manufacturing services, where Flextronics' engineering and development teams work jointly with our customers' teams to ensure product development integrity, seamless manufacturing handoffs, and faster time to market; and



•

Original Design and Manufacturing services, where the customer purchases a product that we design, develop and manufacture. ODM products are then sold by our OEM customers under the OEMs' brand names. We have provided ODM services in various markets including Industrial, Automotive, Medical, and Infrastructure and Power Supplies.

        Our design and engineering services are provided by our global, market-based engineering teams and cover a broad range of technical competencies:

•

System Architecture, User Interface and Industrial Design.    We help our customers design and develop innovative and cost-effective products that address the needs of the user and the market. These services include product definition, analysis and optimization of performance and functional requirements, 2-D sketch level drawings, 3-D mock-ups and proofs of concept, interaction and interface models, detailed hard models and product packaging.



•

Mechanical Engineering, Technology, Enclosure Systems, Thermal and Tooling Design.    We offer detailed mechanical, structural, and thermal design solutions for enclosures that encompass a wide range of plastic, metal and other material technologies. These capabilities and technologies are increasingly important to our customers' product differentiation goals and are increasingly required to be successful in today's competitive marketplace. Additionally, we provide design and development services for prototype and production tooling equipment used in manufacturing.



•

Electronic System Design.    We provide complete electrical and hardware design for products ranging in size from small handheld consumer devices to large high-speed, carrier-grade, telecommunications equipment, which includes embedded microprocessor, memory, digital signal processing design, high-speed digital interfaces, analog circuit design, power management solutions, wired and wireless communication protocols, display imaging, audio/video, and radio frequency system and antenna design.



•

Reliability and Failure Analysis.    We provide comprehensive design for manufacturing, test and reliability services using robust tools and databases that have been developed internally. These services are important in achieving our customers' time to revenue goals and leverage our core manufacturing competencies.



•

Component Level Development Engineering.    We have developed substantial engineering competencies for product development and lifecycle management in support of various component technologies. These components also form a key part of our strategy and currently include power supplies and power solutions, and Printed Circuit Board and Interconnection Technologies, both rigid and flexible.

        We are exposed to different or greater potential liabilities from our various design services than those we face in our core assembly and manufacturing services. See "Risk Factors—The success of certain of our activities depends on our ability to protect our intellectual property rights; intellectual property infringement claims against our customers or us could harm our business."

        Systems Assembly and Manufacturing.    Our assembly and manufacturing operations, which generate the majority of our revenues, include printed circuit board assembly and assembly of systems and subsystems that incorporate printed circuit boards and complex electromechanical components. We often assemble electronics products with our proprietary printed circuit boards and custom electronic enclosures on either a build-to-order or configure-to-order basis. In these operations, we employ just-in-time, ship-to-stock and ship-to-line programs, continuous flow

6

Table of Contents

manufacturing, demand flow processes, and statistical process controls. As OEMs seek to provide greater functionality in smaller products, they increasingly require more sophisticated manufacturing technologies and processes. Our investment in advanced manufacturing equipment and our experience and expertise in innovative miniaturization, packaging and interconnect technologies, enables us to offer a variety of advanced manufacturing solutions. We support a wide range of product demand profiles, from low—volume, high-complexity programs to high-volume production. Continuous focus on lean manufacturing, a systematic approach to identifying and eliminating waste (non-value-added activities) through continuous improvement based on customer demand, allows us to increase our efficiency and flexibility to meet our customers' dynamic requirements. Our systems assembly and manufacturing expertise includes the following:

•

Enclosures.    We offer a comprehensive set of custom electronics enclosures and related products and services worldwide. Our services include the design, manufacture and integration of electronics packaging systems, including custom enclosure systems, power and thermal subsystems, interconnect subsystems, cabling and cases. In addition to standard sheet metal and plastic fabrication services, we assist in the design of electronics packaging systems that protect sensitive electronics and enhance functionality. Our enclosure design services focus on functionality, manufacturability and testing. These services are integrated with our other assembly and manufacturing services to provide our customers with overall improved supply chain management.



•

Testing Services.    We also offer computer-aided testing services for assembled printed circuit boards, systems and subsystems. These services significantly improve our ability to deliver high-quality products on a consistent basis. Our test services include management defect analysis, in-circuit testing and functional testing as well as environmental stress tests of board and system assemblies. We offer design for test, design for manufacturing and design for environment services to our customers to jointly improve customer product design and manufacturing.



•

Materials Procurement and Inventory Management.    Our manufacturing and assembly operations capitalize on our materials inventory management expertise and volume procurement capabilities. As a result, we believe that we are able to achieve highly competitive cost reductions and reduce total manufacturing cycle time for our OEM customers. Materials procurement and management consist of the planning, purchasing, expediting and warehousing of components and materials used in the manufacturing process. In addition, our strategy includes having third-party suppliers of custom components located in our industrial parks to reduce material and transportation costs, simplify logistics and facilitate inventory management. We also use a sophisticated automated manufacturing resource planning system and enhanced electronic data interchange capabilities to ensure inventory control and optimization. Through our manufacturing resources planning system, we have real-time visibility of material availability and are able to track the work in process. We utilize electronic data interchange with our customers and suppliers to implement a variety of supply chain management programs. Electronic data interchange allows customers to share demand and product forecasts and deliver purchase orders and assists suppliers with satisfying just-in-time delivery and supplier-managed inventory requirements. This also enables us to implement vendor managed inventory solutions to increase flexibility and reduce overall capital allocation in the supply chain. We procure a wide assortment of materials, including electronic components, plastics and metals. There are a number of sources for these materials, including from customers for whom we are providing systems assembly and manufacturing services. On some occasions, there have been shortages in certain electronic components, most recently with regard to connectors, capacitors, LCD panels and memory (both DRAM

7

Table of Contents

and Flash). However, such shortages have not had a material impact on our operating results for any periods presented. See "Risk Factors—We may be adversely affected by shortages of required electronic components."

        Component businesses.     The Company offers the following component product solutions:

•

Rigid and Flexible Printed Circuit Board ("PCB") Fabrication.    Printed circuit boards are platforms composed of laminated materials that provide the interconnection for integrated circuits, passive and other electronic components and thus are at the heart of almost every electrical system. They are formed out of multi-layered epoxy resin and glass cloth systems with very fine traces and spaces and plated holes (called vias), which interconnect the different layers to an extremely dense circuitry network that carries the integrated circuits and electrical signals. As semiconductor designs become more and more complex and signal speeds increase, there is an increasing demand on printed circuit board integration density requiring higher layer counts, finer lines and spacings, smaller vias (microvias) and base materials with electrically very low loss characteristics. The manufacturing of these complex multilayer interconnect products often requires the use of sophisticated circuit interconnections between layers, and adherence to strict electrical characteristics to maintain consistent circuit transmission speeds and impedances. The global demand for wireless devices and the complexity of wireless products are driving the demand for more flexible printed circuits. Flexible circuit boards facilitate a reduction in the weight of a finished electronic product and allow the designer to use the third dimension in designing new products or product features. Flexible circuits have become a very attractive design alternative for many new and emerging application spaces such as automotive rear LED lightning, tablet computers, and miniaturized radio frequency identification tags or smart cards. We are an industry leader in high-density interconnect with the Every Layer Inter Connect ("ELIC") technology, which is used in smart phone designs, and multilayer constructions which are used in advanced routers and switches, telecom equipment, servers, storage, and flexible printed circuit boards and flexible printed circuit board assemblies. Our PCB business (Multek) manufactures printed circuit boards on a low-volume, quick-turn basis, as well as on a high-volume production basis. We provide quick-turn prototype services that allow us to provide small test quantities to meet the needs of customers' product development groups in as little as 48 hours. Our extensive range of services enables us to respond to our customers' demands for an accelerated transition from prototype to volume production. Multek offers a one stop solution from design to manufacturing of PCB, flexible circuits and rigid flex circuits and sub-assemblies. We have printed circuit board service capabilities in North America, South America, Europe and Asia, and flexible circuit fabrication service capabilities in North America and Asia. During fiscal year 2013 we began consolidating Multek's footprint and rationalizing its operations and expect to fully complete the closing of our Multek factories in Germany and Brazil during fiscal year 2014. We believe this will drive operational efficiencies, and result in an optimization of our system, which will lower the revenue level required to achieve better margins. Going forward our capabilities will be centered in Asia and North America.



•

Power Supplies.    We have a full service power supply business ("Flex Power") that specializes in high efficiency and high density switching power supplies ranging from 1 to 3,000 watts. The product portfolio includes chargers for the mobile phones and the fast-growing tablet markets, adapters for notebooks and printers and boxed power supplies for the desktop markets along with networking, server and storage markets. We pride ourselves in our ability to service the needs of industry leaders in these markets through collaborative development and efficient program management execution. Our products are fully compliant with environmental and Energy Star industry requirements that drive

8

Table of Contents

efficiency specifications in the industry. Customers who engage with Flex Power get the advantage of our technological innovations in such areas as digital control or smart power, while still managing to offer competitive pricing. Our unique platform development approach enables our customers to get to their markets faster.

        Logistics.    Flextronics Global Services is a provider of after-market supply chain logistics services. Our comprehensive suite of services serve customers operating in the computing, consumer digital, infrastructure, industrial, mobile and medical markets. Our expansive global infrastructure consists of 25 sites and more than 12,000 employees strategically located throughout the Americas, Europe and Asia. By leveraging our operational infrastructure, supply chain network, and IT systems, we have the capability of offering globally consistent logistics solutions for our customers' brands. By linking the flow of information from the supply chains, we create supply chain efficiencies delivering value to our customers. We provide multiple logistics solutions including supplier managed inventory, inbound freight management, product postponement, build/configure to order, order fulfillment and distribution, and supply chain network design.

        Reverse Logistics and Repair Services.     We offer a suite of integrated reverse logistics and repair solutions that are operated on globally consistent processes, which help our customers protect their brand loyalty in the marketplace by improving turnaround times and end-customer satisfaction levels. Our objective is to maintain maximum asset value retention of our customers' products throughout their product life cycle while simultaneously minimizing non-value repair inventory levels and handling in the supply chain. With our suite of end-to-end solutions, we can effectively manage our customers' reverse logistics requirements while also providing critical feedback of data to their supply chain constituents and delivering continuous improvement and efficiencies for both existing and next generation products. Our reverse logistics and repair solutions include returns management, exchange programs, complex repair, asset recovery, recycling and e-waste management. We provide repair expertise to multiple product lines such as consumer and midrange products, printers, PDA's, mobile phones, consumer medical devices, notebooks, PC's, set-top boxes, game consoles and highly complex infrastructure products. With our service parts logistics business, we manage all of the logistics and restocking processes essential to the efficient operation of repair and refurbishment services.

STRATEGY

        Our company's goal is to empower talented employees to develop global supply chain solutions that transforms industries and companies. At our core, we are a world-class global design, manufacturing and services company. Our strategy is to maintain our leadership in these core capabilities and to build on these through extended offerings in high-growth sectors.

        Talent.     To maintain our competitiveness and world-class capabilities, we are renewing our focus on hiring and retaining the world's best talent. We have taken steps to attract the best functional and operational leaders and accelerated efforts at developing the future leaders of the company.

        Customer-Focus.     We believe that serving aspiring leaders in dynamic industries pushes the development of our core skills and results in superior growth and profitability. Our customers come first, and we have a relentless focus on delivering distinctive products and services in a cost-effective manner with fast time-to-market.

        Market-Focus.     We apply a rigorous approach to managing our portfolio of opportunities by focusing on companies and industries that value our superior capabilities in design, manufacturing and service and that are leaders in their industry. We are focusing our energy and efforts on high-growth markets where we have distinctive competence and a compelling value proposition.

9

Table of Contents

Examples include our investments in clean-tech, healthcare, infrastructure, automotive, services and investments in a number of enabling components technologies. Our market focused approach to managing our business increases our customers' competitiveness by leveraging our global resources and responsiveness to changes in market dynamics.

        Global Operations Capabilities.     We continue to invest in maintaining the leadership of our world-class manufacturing and services capabilities. We constantly push the state of the art in manufacturing technology, process development and operations management. We believe these skills represent a significant competitive advantage. We continue to capitalize on our industrial park concept, where we co-locate our manufacturing, design, and service resources in low cost regions, to provide a competitive advantage by minimizing logistics, manufacturing costs and cycle times while increasing flexibility and responsiveness. Our ability to cost effectively manage a massive worldwide system, is itself a major competitive advantage.

        Extended Value Propositions.     We continue to extend our distinctiveness in manufacturing into new value propositions that leverage our core capabilities. We opportunistically invest in new capabilities and services to provide our customers with a broader value added suite of services and solutions to meet their product and market requirements. We continue to develop manufacturing process technologies that reduce cost and improve product performance.

COMPETITIVE STRENGTHS

        We continue to enhance our business through the development and broadening of our product and service offerings. Our focus is to be a flexible organization with repeatable execution that adapts to macro-economic changes and creates value which increases our customers' competitiveness. We have concentrated our strategy on market-focused expertise, capabilities, services and our global supply chain services. We believe that the following capabilities differentiate us from our competitors and enable us to better serve our customers' requirements:

        Significant Scale and Global Integrated System.    We believe that scale is a significant competitive advantage, as our customers' solutions increasingly require cost structures and capabilities that can only be achieved through size and global reach. We are a leader in global procurement, purchasing approximately $21.5 billion of materials during our fiscal year ended March 31, 2013. As a result, we are able to use our worldwide supplier relationships to achieve advantageous pricing and supply chain flexibility for our OEM customers.

        We have established an extensive, integrated network of design, manufacturing and logistics facilities in the world's major electronics markets to serve the outsourcing needs of both multinational and regional OEMs. Our extensive global network of facilities in over 30 countries with approximately 149,000 employees gives us the ability to increase the competitiveness of our customers by simplifying their global product development processes while also delivering improved product quality with improved performance and accelerated time to market. Operating and executing this complex worldwide solutions system is a competitive advantage.

        End-to-End Solution.     We offer a comprehensive range of worldwide supply chain services that simplify and improve the global product development process and provide meaningful time and cost savings to our OEM customers. Our broad based, end-to-end services enable us to cost effectively design, build, ship and service a complete packaged product. We believe that our capabilities also help our customers improve product quality, manufacturability and performance, and reduce costs. We have expanded and enhanced our service offering by adding capabilities in machining, flexible printed circuit boards, and power supplies, as well as by introducing new capabilities in areas such as solar equipment, large format stamping and chargers.

10

Table of Contents

        Long-Standing Customer Relationships.    We believe that maintaining our long-term relationships with key customers is a critical requirement for maintaining our market position, growth and profitability. We believe that our ability to maintain and grow these customer relationships results from our ability to continuously create value that increases our customers' competitiveness. We achieve this through our broad range of service offerings and solutions, and our market-focused approach, which allows us to provide innovative thinking to all of the manufacturing and related services that we provide to our customers. We continue to receive numerous service and quality awards that further validate the success of these programs.

        Extensive Design and Engineering Capabilities.     We have an industry leading global design service offering with extensive product design engineering resources that provide global design services, products, and solutions to satisfy a wide array of customer requirements across all of our key markets. We combine our design and manufacturing services to provide end-to-end customized solutions that include services from design layout, through product industrialization and product development, including the manufacture of components and complete products (such as smart phones), which are then sold by our OEM customers under the OEMs' brand names.

        Geographic, Customer and End Market Diversification.     We believe that we have created a well-diversified and balanced company. We have diversified our business across multiple end markets, significantly expanding our available market. The world is undergoing change and macro-economic disruptions that has led to demand shifts and realignments. We believe that we are well positioned through our market diversification to grow in excess of the industry average and successfully navigate through difficult economic climates. Our broad geographic footprint and experience with multiple types and complexity levels of products provide us a significant competitive advantage. We continually look for new ways to diversify our offering within each market segment.

        Industrial Parks; Low-Cost Manufacturing Services.     We have developed self-contained campuses that co-locate our manufacturing and logistics operations with our suppliers at a single, low-cost location. These industrial parks enhance our total supply chain management, while providing a low-cost, multi-technology solution for our customers. This approach increases the competitiveness of our customers by reducing logistical barriers and costs, improving communications, increasing flexibility, lowering transportation costs and reducing turnaround times. We have strategically established our large industrial parks in Brazil, China, Hungary, Indonesia, Malaysia, Mexico, and Romania.

        We have certain of our manufacturing operations situated in low-cost regions of the world to provide our customers with a wide array of manufacturing solutions and low manufacturing costs. As of March 31, 2013, approximately 76% of our manufacturing capacity was located in low-cost locations, such as Brazil, China, Hungary, India, Indonesia, Malaysia, Mexico, Romania, Singapore, and Ukraine. We believe we are a global industry leader in low-cost production capabilities.

CUSTOMERS

        Our customers include many of the world's leading technology companies. We have focused on establishing long-term relationships with our customers and have been successful in expanding our relationships to incorporate additional product lines and services. In fiscal year 2013, our ten largest customers accounted for approximately 47% of net sales. No customer accounted for greater than 10% of the Company's net sales in fiscal 2013.

11

Table of Contents

        The following table lists in alphabetical order a sample of our largest customers in fiscal year 2013 and the end products of those customers for which we provide design, manufacturing or after-market services:

BACKLOG

        Although we obtain firm purchase orders from our customers, OEM customers typically do not make firm orders for delivery of products more than 30 to 90 days in advance. In addition, OEM customers may reschedule or cancel firm orders based upon contractual arrangements. Therefore, we do not believe that the backlog of expected product sales covered by firm purchase orders is a meaningful measure of future sales.

COMPETITION

        Our market is extremely competitive and includes many companies, several of which have achieved substantial market share. We compete against numerous domestic and foreign manufacturing service providers, as well as our current and prospective customers, who evaluate our capabilities in light of their own capabilities and cost structures. We face particular competition from Asian based competitors, including Taiwanese ODM suppliers who compete in a variety of our end markets and have a substantial share of global information technology hardware production.

        We compete with different companies depending on the type of service we are providing or the geographic area in which an activity takes place. We believe that the principal competitive factors in the manufacturing services market are: quality and range of services; design and technological capabilities; cost; location of facilities; responsiveness and flexibility.

SOCIAL RESPONSIBILITY

        Our corporate social responsibility practices focus on global human rights, global environmental conditions, business ethics, and the health and safety of all stakeholders. We do this with controlled business processes, thus ensuring that our business is conducted in a manner that goes beyond compliance alone. We operate programs, including compliance audits and compliance capability building programs that focus on driving continuous improvements in social, ethical, and environmental compliance throughout all of our global operating units in accordance with our Code of Conduct. As a guide to achieve this end, Flextronics looks at principles, policies, and standards as prescribed by the

12

Table of Contents

Electronics Industry Citizenship Coalition ("EICC"), a worldwide association of electronics companies committed to promoting an industry code of conduct for global electronics supply chains to improve working and environmental conditions. Flextronics is a founding member of the EICC coalition.

        Being a good corporate citizen does not mean that we should merely conform to the standards. We extend beyond meeting responsibilities by offering a wide range of programs and initiatives that engage our internal and external communities. At the heart of this endeavor lies our pragmatic goal of creating a difference to the people in the community in which we operate. We intend to continue to invest in these global communities through grant-making, financial contributions, volunteer work, support programs and by donating resources.

        The Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010 (the "Dodd-Frank Act"), Section 1502 introduces reporting requirements related to the verification of whether Flextronics directly (or indirectly through suppliers of materials) is purchasing the minerals or metals gold, columbite-tantalite. cassiterite, wolframite and their derivatives: tin, tungsten, and tantalum that are being provided by sources in the conflict region of the Democratic Republic of Congo (DRC) and the surrounding neighbor countries. Flextronics is working directly with suppliers, industry groups, and customers to comply with the due diligence reporting requirements necessary to comply with the new law. See "Risk Factor—Compliance with government regulations regarding the use of "conflict minerals" may result in increased costs and risks to us."

ENVIRONMENTAL REGULATION

        Our operations are regulated under various federal, state, local and international laws governing the environment, including laws governing the discharge of pollutants into the air and water, the management and disposal of hazardous substances and wastes and the cleanup of contaminated sites. We have fully implemented processes and procedures to ensure that our operations are in compliance with all applicable environmental regulations. We do not believe that costs of compliance with these laws and regulations will have a material adverse effect on our capital expenditures, operating results, or competitive position. In addition, we are responsible for cleanup of contamination at some of our current and former manufacturing facilities and at some third-party sites. We engage environmental consulting firms to assist us in the evaluation of environmental liabilities of our ongoing operations, historical disposal activities and closed sites in order to establish appropriate accruals in our financial statements. We determine the amount of our accruals for environmental matters by analyzing and estimating the probability of occurrence and the reasonable possibility of incurring costs in light of information currently available. The imposition of more stringent standards or requirements under environmental laws or regulations, the results of future testing and analysis undertaken by us at our operating facilities, or a determination that we are potentially responsible for the release of hazardous substances at other sites could result in expenditures in excess of amounts currently estimated to be required for such matters. While no material exposures have been identified to date that we are aware of, there can be no assurance that additional environmental matters will not arise in the future or that costs will not be incurred with respect to sites as to which no problem is currently known.

        We are also required to comply with an increasing number of product environmental compliance regulations focused on the restriction of certain hazardous substances. For example, the electronics industry is subject to the European Union's ("EU") Restrictions on Hazardous Substances ("RoHS") 2011/65/EU, Waste Electrical and Electronic Equipment ("WEEE") 2012/19/EU directives, the regulation EC 1907/2006 EU Directive REACH ("Registration, Evaluation, Authorization, and Restriction of Chemicals"), and China RoHS entitled, Management Methods for Controlling Pollution for Electronic Information Products ("EIPs"). Similar legislation has been or may be enacted in other jurisdictions, including in the United States. Our business requires close collaboration with our customers and suppliers to mitigate risk of non-compliance. We have developed rigorous risk mitigating compliance programs designed to meet the needs of our customers as well as the regulations. These

13

Table of Contents

programs vary from collecting compliance or material data from our Flextronics owned suppliers to full laboratory testing, and we require our supply chain to comply. Non-compliance could potentially result in significant costs and/or penalties. RoHS and other similar legislation bans or restricts the use of lead, mercury and certain other specified substances in electronics products and WEEE requires EU importers and/or producers to assume responsibility for the collection, recycling and management of waste electronic products and components. In the case of WEEE, although the compliance responsibility rests primarily with the EU importers and/or producers rather than with EMS companies, OEMs may turn to EMS companies for assistance in meeting their WEEE obligations. New technical classifications of e-Waste being discussed in the Basel Convention technical working group could affect both Flextronics and Flextronics' customers abilities and obligations in electronics repair and refurbishment. Flextronics continues to monitor these discussions and is working with our customers and other technical organizations to minimize the impact to legal and responsibly managed repair operations.

EMPLOYEES

        As of March 31, 2013, our global workforce totaled approximately 149,000 employees. In certain international locations, our employees are represented by labor unions and by work councils. We have never experienced a significant work stoppage or strike, and we believe that our employee relations are good.

        Our success depends to a large extent upon the continued services of key managerial and technical employees. The loss of such personnel could seriously harm our business, results of operations and business prospects. To date, we have not experienced significant difficulties in attracting or retaining such personnel.

INTELLECTUAL PROPERTY

        We own or license various United States and foreign patents relating to a variety of technologies. For certain of our proprietary processes, we rely on trade secret protection. We also have registered our corporate name and several other trademarks and service marks that we use in our business in the United States and other countries throughout the world. As of March 31, 2013 and 2012, the carrying value of our intellectual property was not material.

        Although we believe that our intellectual property assets and licenses are sufficient for the operation of our business as we currently conduct it, from time to time third parties do assert patent infringement claims against us or our customers. In addition, we provide design and engineering services to our customers and designing and making our own products. As a consequence of these activities, our customers are requiring us to take responsibility for intellectual property to a greater extent than in our manufacturing and assembly businesses. If and when third parties make assertions regarding the ownership or right to use intellectual property, we could be required to either enter into licensing arrangements or to resolve the issue through litigation. Such license rights might not be available to us on commercially acceptable terms, if at all, and any such litigation might not be resolved in our favor. Additionally, litigation could be lengthy and costly and could materially harm our financial condition regardless of the outcome. We also could be required to incur substantial costs to redesign a product or re-perform design services.

FINANCIAL INFORMATION ABOUT GEOGRAPHIC AREAS

        Refer to note 17 to our consolidated financial statements included under Item 8 for financial information about our geographic areas.

14

Table of Contents

ADDITIONAL INFORMATION

        Our internet address is http://www.flextronics.com. We make available through our Internet website the Company's annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) of the Securities Exchange Act of 1934 as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission.

        We were incorporated in the Republic of Singapore in May 1990. Our principal corporate office is located at 2 Changi South Lane, Singapore 486123. Our U.S. corporate headquarters is located at 6201 America Center Drive, San Jose, CA, 95002.

ITEM 1A.    RISK FACTORS

We depend on industries that continually produce technologically advanced products with short life cycles and our business would be adversely affected if our customers' products are not successful or if our customers lose market share.

        We derive our revenues from customers in the following markets:

•

HRS, which is comprised of our medical, automotive, defense and aerospace businesses;



•

HVS, which includes our mobile devices business, including smart phones, and consumer electronics, including game consoles, high-volume computing business, including notebook personal computing ("PC"), tablets and printers;



•

IEI, which is comprised of our large household appliances, equipment, and emerging industries businesses; and



•

INS, which includes our telecommunications infrastructure, data networking, connected home, and server and storage businesses.

        Factors affecting any of these industries in general or our customers in particular, could adversely impact us. These factors include:

•

rapid changes in technology, evolving industry standards and requirements for continuous improvement in products and services result in short product life cycles;



•

demand for our customers' products may be seasonal;



•

our customers may fail to successfully market their products, and our customers' products may fail to gain widespread commercial acceptance;



•

our customers may experience dramatic market share shifts in demand which may cause them to exit the business; and



•

there may be recessionary periods in our customers' markets, such as the recent global economic downturn.

Our customers may cancel their orders, change production quantities or locations, or delay production, and the inherent difficulties involved in responding to these demands could harm our business.

        Cancellations, reductions or delays by a significant customer or by a group of customers have harmed, and may continue to harm, our results of operations by reducing the volumes of products we manufacture and deliver for these customers, by causing a delay in the repayment of our expenditures for inventory in preparation for customer orders and by lowering our asset utilization resulting in lower gross margins. Additionally, current and prospective customers continuously evaluate our capabilities against other providers as well as against the merits of manufacturing products themselves. Our

15

Table of Contents

business would be adversely affected if OEMs decide to perform these functions internally or transfer their business to another provider.

        As a provider of electronics design and manufacturing services and components, we must provide increasingly rapid product turnaround time for our customers. We generally do not obtain firm, long-term purchase commitments from our customers, and we often experience reduced lead times in customer orders which may be less than the lead time we require to procure necessary components and materials.

        The short-term nature of our customers' commitments and the rapid changes in demand for their products reduces our ability to accurately estimate the future requirements of our customers. This makes it difficult to schedule production and maximize utilization of our manufacturing capacity. In that regard, we must make significant decisions, including determining the levels of business that we will seek and accept, setting production schedules, making component procurement commitments, and allocating personnel and other resources, based on our estimates of our customers' requirements.

        On occasion, customers require rapid increases in production or require that manufacturing of their products be transitioned from one facility to another to reduce costs or achieve other objectives. These demands stress our resources and reduce our margins. We may not have sufficient capacity at any given time to meet our customers' demands, and transfers from one facility to another can result in inefficiencies and costs due to excess capacity in one facility and corresponding capacity constraints at another. Due to many of our costs and operating expenses being relatively fixed, customer order fluctuations, deferrals and transfers of demand from one facility to another, as described above, have had a material adverse effect on our operating results in the past and we may experience such effects in the future.

Our industry is extremely competitive; if we are not able to continue to provide competitive services, we may lose business.

        We compete with a number of different companies, depending on the type of service we provide or the location of our operations. For example, we compete with major global EMS providers, other smaller EMS companies that have a regional or product-specific focus and ODMs with respect to some of the services that we provide. We also compete with our current and prospective customers, who evaluate our capabilities in light of their own capabilities and cost structures. Our industry is extremely competitive, many of our competitors have achieved substantial market share, and some may have lower cost structures or greater design, manufacturing, financial or other resources than we do. We face particular competition from Asian-based competitors, including Taiwanese ODM suppliers who compete in a variety of our end markets and have a substantial share of global information technology hardware production. If we are unable to provide comparable manufacturing services and improved products at lower cost than the other companies in our market, our net sales could decline.

The majority of our sales come from a small number of customers and a decline in sales to any of these customers could adversely affect our business.

        Sales to our ten largest customers represent a significant percentage of our net sales. Our ten largest customers accounted for approximately 47%, 55% and 52% of net sales in fiscal years 2013, 2012 and 2011, respectively. No customer accounted for greater than 10% of the Company's net sales in fiscal 2013. Our largest customers during fiscal year 2012 were Hewlett-Packard (HP) and Research In Motion (RIM), which each accounted for more than 10% of net sales. No other customer accounted for more than 10% of net sales in fiscal year 2012. Our largest customer during fiscal year 2011 was Research In Motion which accounted for more than 10% of net sales in 2011. No other customer accounted for more than 10% of net sales in fiscal year 2011. Our principal customers have varied from year to year. These customers may experience dramatic declines in their market shares or competitive

16

Table of Contents

position, due to economic or other forces, that may cause them to reduce their purchases from us or, in some cases, result in the termination of their relationship with us. Significant reductions in sales to any of these customers, or the loss of major customers, would materially harm our business. If we are not able to timely replace expired, canceled or reduced contracts with new business, our revenues and profitability could be harmed.

Our components business is dependent on our ability to quickly launch world-class components products, and our investment in the development of our component capabilities, together with the start-up and integration costs necessary to achieve quick launches of world-class components products, may adversely affect our margins and profitability.

        Our components business, which includes rigid and flexible printed circuit board fabrication, and power supplies manufacturing, is part of our strategy to improve our competitive position and to grow our future margins, profitability and shareholder returns by expanding our capabilities. The success of our components business is dependent on our ability to design and introduce world-class components that have performance characteristics which are suitable for a broad market and that offer significant price and/or performance advantages over competitive products.

        To create these world class components offerings, we must continue to make substantial investments in the development of our components capabilities, in resources such as research and development, technology licensing, test and tooling equipment, facility expansions and personnel requirements. We may not be able to achieve or maintain market acceptance for any of our components offerings in any of our current or target markets. The success of our components business will also depend upon the level of market acceptance of our customers' end products, which incorporate our components, and over which we have no control.

        In addition, OEMs often require unique configurations or custom designs which must be developed and integrated in the OEM's product well before the product is launched by the OEM. Thus, there is often substantial lead time between the commencement of design efforts for a customized component and the commencement of volume shipments of the component to the OEM. As a result, we may make substantial investments in the development and customization of products for our customers, and no revenue may be generated from these efforts if our customers do not accept the customized component. Even if our customers accept the customized component, if our customers do not purchase anticipated levels of products, we may not realize any profits.

        Our achievement of anticipated levels of profitability in our components business is also dependent on our ability to achieve efficiencies in our manufacturing as well as to manufacture components in commercial quantities to the performance specifications demanded by our OEM customers. As a result of these and other risks, we have been, and in the future may be, unable to achieve anticipated levels of profitability in our components business.

Our exposure to financially troubled customers or suppliers may adversely affect our financial results.

        We provide manufacturing services to companies and industries that have in the past, and may in the future, experience financial difficulty. If our customers experience financial difficulty, we could have difficulty recovering amounts owed to us from these customers, or demand for our products from these customers could decline. Additionally, if our suppliers experience financial difficulty we could have difficulty sourcing supply necessary to fulfil production requirements and meet scheduled shipments. If one or more of our customers were to become insolvent or otherwise were unable to pay for the services provided by us on a timely basis, or at all, our operating results and financial condition could be adversely affected. Such adverse effects could include one or more of the following: an increase in our provision for doubtful accounts, a charge for inventory write-offs, a reduction in revenue, and an

17

Table of Contents

increase in our working capital requirements due to higher inventory levels and increases in days our accounts receivable are outstanding.

We may be adversely affected by shortages of required electronic components.

        From time to time, we have experienced shortages of some of the electronic components that we use. These shortages can result from strong demand for those components or from problems experienced by suppliers, such as shortages of raw materials. These unanticipated component shortages could result in curtailed production or delays in production, which may prevent us from making scheduled shipments to customers. Our inability to make scheduled shipments could cause us to experience a reduction in sales, increase in inventory levels and costs, and could adversely affect relationships with existing and prospective customers. Component shortages may also increase our cost of goods sold because we may be required to pay higher prices for components in short supply and redesign or reconfigure products to accommodate substitute components. As a result, component shortages could adversely affect our operating results. Our performance depends, in part, on our ability to incorporate changes in component costs into the selling prices for our products.

        Our supply chain may also be impacted by other events outside our control, including macro-economic events, political crises or natural or environmental occurrences. Component shortages impacted our results during the second half of fiscal year 2010, during the first quarter of fiscal year 2011 and during fiscal year 2012. The supply constraints were broad based, but the impact was most evident with respect to connectors, capacitors, LCD panels and memory (both DRAM and Flash). These shortages began to abate during the second quarter of fiscal year 2011, and supplies had normalized by the end of the third quarter. In addition, the March 2011 earthquake and tsunami in Japan resulted in disruptions to our supply chain, as a large number of our suppliers of semiconductors and other electronic components are located in Japan. These disruptions had a negative impact on our revenue in the first and second quarters of fiscal year 2012. We also continue to evaluate the extent of the disruption to our supply chain and the impact on our business caused by the flooding in Thailand during the second half of 2011, which had a negative impact on our revenue in the third quarter of fiscal year 2012, as a number of our suppliers of hard disk drives and other electronic components maintain facilities in Thailand.

Our margins and profitability may be adversely affected due to substantial investments, start-up and production ramping costs in our design services.

        As part of our strategy to enhance our end-to-end service offerings, we have expanded and continue to expand our design and engineering capabilities. Providing these services can expose us to different or greater potential risks than those we face when providing our manufacturing services.

        Although we enter into contracts with our design services customers, we may design and develop products for these customers prior to receiving a purchase order or other firm commitment from them. We are required to make substantial investments in the resources necessary to design and develop these products, and no revenue may be generated from these efforts if our customers do not approve the designs in a timely manner or at all. Even if our customers accept our designs, if they do not then purchase anticipated levels of products, we may not realize any profits. Our design activities often require that we purchase inventory for initial production runs before we have a purchase commitment from a customer. Even after we have a contract with a customer with respect to a product, these contracts may allow the customer to delay or cancel deliveries and may not obligate the customer to any particular volume of purchases. These contracts can generally be terminated on short notice. In addition, some of the products we design and develop must satisfy safety and regulatory standards and some must receive government certifications. If we fail to obtain these approvals or certifications on a timely basis, we would be unable to sell these products, which would harm our sales, profitability and reputation.

18

Table of Contents

        Due to the increased risks associated with our design services offerings, we may not be able to achieve a high enough level of sales for this business, and the significant investments in research and development, technology licensing, test and tooling equipment, patent applications, facility expansion and recruitment that it requires, to be profitable. The initial costs of investing in the resources necessary to expand our design and engineering capabilities, and in particular to support our design services offerings, have historically adversely affected our profitability, and may continue to do so as we continue to make investments in these capabilities.

        In addition, we agree to certain product price limitations and cost reduction targets in connection with these services. Inflationary and other increases in the costs of the raw materials and labor required to produce the products have occurred and may recur from time to time. Also, the production ramps for these programs are typically significant and negatively impact our margin in early stages as the manufacturing volumes are lower and result in inefficiencies and unabsorbed manufacturing overhead costs. We may not be able to reduce costs, incorporate changes in costs into the selling prices of our products, or increase operating efficiencies as we ramp production of our products, which would adversely affect our margins and our results of operations.

We may not meet regulatory quality standards applicable to our manufacturing and quality processes for medical devices, which could have an adverse effect on our business, financial condition or results of operations.

        As a medical device manufacturer, we have additional compliance requirements. We are required to register with the U.S. Food and Drug Administration ("FDA") and are subject to periodic inspection by the FDA for compliance with the FDA's Quality System Regulation ("QSR") requirements, which require manufacturers of medical devices to adhere to certain regulations, including testing, quality control and documentation procedures. Compliance with applicable regulatory requirements is subject to continual review and is rigorously monitored through periodic inspections and product field monitoring by the FDA. If any FDA inspection reveals noncompliance with QSR or other FDA regulations, and the Company does not address the observation adequately to the satisfaction of the FDA, the FDA may take action against us. FDA actions may include issuing a letter of inspectional observations, issuing a warning letter, imposing fines, bringing an action against the Company and its officers, requiring a recall of the products we manufactured for our customers, refusing requests for clearance or approval of new products or withdrawal of clearance or approval previously granted, issuing an import detention on products entering the U.S. from an offshore facility, or shutting down a manufacturing facility. If any of these actions were to occur, it would harm our reputation and cause our business to suffer.

        In the European Union ("EU"), we are required to maintain certain standardized certifications in order to sell our products and must undergo periodic inspections to obtain and maintain these certifications. Continued noncompliance to the EU regulations could stop the flow of products into the EU from us or from our customers. In China, the Safe Food and Drug Administration controls and regulates the manufacture and commerce of healthcare products. We must comply with the regulatory laws applicable to medical device manufactures or our ability to manufacture products in China could be impacted. In Japan, the Pharmaceutical Affairs Laws regulate the manufacture and commerce of healthcare products. These regulations also require that subcontractors manufacturing products intended for sale in Japan register with authorities and submit to regulatory audits. Other Asian countries where we operate have similar laws regarding the regulation of medical device manufacturing.

We conduct operations in a number of countries and are subject to risks of international operations.

        The distances between the Americas, Asia and Europe create a number of logistical and communications challenges for us. These challenges include managing operations across multiple time zones, directing the manufacture and delivery of products across distances, coordinating procurement of

19

Table of Contents

components and raw materials and their delivery to multiple locations, and coordinating the activities and decisions of the core management team, which is based in a number of different countries. Facilities in several different locations may be involved at different stages of the production of a single product, leading to additional logistical difficulties.

        Because our manufacturing operations are located in a number of countries throughout the Americas, Asia and Europe, we are subject to the risks of changes in economic and political conditions in those countries, including:

•

fluctuations in the value of local currencies;



•

labor unrest, difficulties in staffing and geographic labor shortages;



•

longer payment cycles;



•

cultural differences;



•

increases in duties and taxation levied on our products;



•

imposition of restrictions on currency conversion or the transfer of funds;



•

limitations on imports or exports of components or assembled products, or other travel restrictions;



•

expropriation of private enterprises;



•

exposure to infectious disease and epidemics; and



•

a potential reversal of current favorable policies encouraging foreign investment or foreign trade by our host countries.

        The attractiveness of our services to U.S. customers can be affected by changes in U.S. trade policies, such as most favored nation status and trade preferences for some Asian countries. In addition, some countries in which we operate, such as Brazil, Hungary, India, Mexico, Malaysia and Poland, have experienced periods of slow or negative growth, high inflation, significant currency devaluations or limited availability of foreign exchange. Furthermore, in countries such as China and Mexico, governmental authorities exercise significant influence over many aspects of the economy, and their actions could have a significant effect on us. We could be seriously harmed by inadequate infrastructure, including lack of adequate power and water supplies, transportation, raw materials and parts in countries in which we operate. In addition, we may encounter labor disruptions and rising labor costs, in particular within the lower-cost regions in which we operate. Any increase in labor costs that we are unable to recover in our pricing to our customers could adversely impact our operating results.

        Operations in foreign countries also present risks associated with currency exchange and convertibility, inflation and repatriation of earnings. In some countries, economic and monetary conditions and other factors could affect our ability to convert our cash distributions to U.S. dollars or other freely convertible currencies, or to move funds from our accounts in these countries. Furthermore, the central bank of any of these countries may have the authority to suspend, restrict or otherwise impose conditions on foreign exchange transactions or to approve distributions to foreign investors.

        Another significant legal risk resulting from our international operations is compliance with the U.S. Foreign Corrupt Practices Act or similar local laws of the countries in which we do business, including the UK Anti-Bribery Act, which prohibits covered companies from making payments to foreign government officials to assist in obtaining or retaining business. Our Code of Business Conduct prohibits corrupt payments on a global basis and precludes us from offering or giving anything of value to a government official for the purpose of obtaining or retaining business, to win a business advantage

20

Table of Contents

or to improperly influence a decision regarding Flextronics. Nevertheless, there can be no assurance that all of our employees and agents will refrain from taking actions in violation of this and our related anti-corruption policies and procedures. Any such violation could have a material adverse effect on our business.

If our security systems and governance policies are breached, we may incur significant legal and financial exposure.

        We have implemented security systems and governance policies with the intent of maintaining the physical security of our facilities and inventory and protecting our customers' and our suppliers' confidential information. Despite such efforts, we are subject to, and at times have suffered from, breach of these security systems and governance policies which have in the past and may in the future result in unauthorized access to our facilities and/or unauthorized use or theft of the inventory or information we are trying to protect. If unauthorized parties gain physical access to our inventory or if they gain electronic access to our information systems or if such information or inventory is used in an unauthorized manner, misdirected, lost or stolen during transmission or transport, any theft or misuse of such information or inventory could result in, among other things, unfavorable publicity, governmental inquiry and oversight, difficulty in marketing our services, allegations by our customers that we have not performed our contractual obligations, litigation by affected parties including our customers and possible financial obligations for damages related to the theft or misuse of such information or inventory, any of which could have a material adverse effect on our profitability and cash flow. We believe that we have adopted appropriate measures to mitigate potential risks to our technology and our operations from the breach of our security systems.

Compliance with government regulations regarding the use of "conflict minerals" may result in increased costs and risks to us.

        As part of the Dodd-Frank Act, the SEC has promulgated disclosure requirements regarding the use of certain minerals, which are mined from the Democratic Republic of Congo and adjoining countries, known as conflict minerals. The disclosure rules will take effect for the Company in May 2014. We may have to publicly disclose whether the products we sell contain conflict minerals and could incur significant costs related to implementing a process that will meet the mandates of the Act. Additionally, customers rely on us to provide critical data regarding the products they purchase and will likely request conflict mineral information. Our materials sourcing is broad-based and multi-tiered, and we may not be able to easily verify the origins of the minerals used in the products we sell. We have many suppliers and each may provide conflict mineral information in a different manner, if at all. Accordingly, because the supply chain is complex, our reputation may suffer if we are unable to sufficiently verify the origins of conflict minerals, if any, used in its products. Additionally, customers may demand that the products they purchase be free of conflict minerals. The implementation of this requirement could affect the sourcing and availability of products we purchase from our suppliers. This may reduce the number of suppliers that may be able to provide conflict free products and may affect our ability to obtain products in sufficient quantities to meet customer demand or at competitive prices.

We are subject to the risk of increased income taxes.

        The Company is subject to taxes in numerous jurisdictions. The Company's future effective tax rates could be affected by changes in the mix of earnings in countries with differing statutory rates and changes in tax laws or their interpretation including changes related to tax holidays or tax incentives. Our taxes could increase if certain tax holidays or incentives are not renewed upon expiration, or if tax rates applicable to us in such jurisdictions are otherwise increased. For example, on March 16, 2007, the Chinese government passed a new unified enterprise income tax law which became effective on January 1, 2008. Among other things, the new law canceled many income tax incentives previously

21

Table of Contents

applicable to our subsidiaries in China. Under the new law, the tax rates applicable to the operations of most of our subsidiaries in China have been increased to 25%. The new law provided a transition rule which increased the tax rate to 25% over a 5-year period, which ended in 2012. The new law also increased the standard withholding rate on earnings distributions to between 5% and 10% depending on the residence of the shareholder. The ultimate effect of these and other changes in Chinese tax laws on our overall tax rate will be affected by, among other things, our China income, the manner in which China interprets, implements and applies the new tax provisions, and our ability to qualify for any exceptions or new incentives. Similarly, we recently renewed a Malaysian tax holiday that expired on January 31, 2012 for another ten year period. Our continued ability to qualify for specific tax holiday extensions will depend on, among other things, our anticipated investment and expansion in these countries and the manner in which the local governments interpret the requirements for extensions or new incentives.

        In addition, the Company and its subsidiaries are regularly subject to tax return audits and examinations by various taxing jurisdictions around the world. In determining the adequacy of our provision for income taxes, we regularly assess the likelihood of adverse outcomes resulting from tax examinations. While it is often difficult to predict the final outcome or the timing of the resolution of a tax examination, we believe that our reserves for uncertain tax benefits reflect the outcome of tax positions that are more likely than not to occur. However, we cannot assure you that the final determination of any tax examinations will not be materially different than that which is reflected in our income tax provisions and accruals. Should additional taxes be assessed as a result of a current or future examination, there could be a material adverse effect on our tax provision, operating results, financial position and cash flows in the period or periods for which that determination is made.

If our products or components contain defects, demand for our services may decline and we may be exposed to product liability and product warranty liability.

        Defects in the products we manufacture or design, whether caused by a design, engineering, manufacturing or component failure or deficiencies in our manufacturing processes, could result in product or component failures, which may damage our business reputation and expose us to product liability or product warranty claims.

        Product liability claims may include liability for personal injury or property damage. Product warranty claims may include liability to pay for the recall, repair or replacement of a product or component. Although we generally allocate liability for these claims in our contracts with our customers, increasingly we are unsuccessful in allocating such liability, and even where we have allocated liability to our customers, our customers may not have the resources to satisfy claims for costs or liabilities arising from a defective product or component for which they have assumed responsibility.

        If we design, engineer or manufacture a product or component that is found to cause any personal injury or property damage or is otherwise found to be defective, we could spend a significant amount of money to resolve the claim. In addition, product liability and product recall insurance coverage are expensive and may not be available with respect to all of our services offerings on acceptable terms, in sufficient amounts, or at all. A successful product liability or product warranty claim in excess of our insurance coverage or any material claim for which insurance coverage is denied, limited or is not available could have a material adverse effect on our business, results of operations and financial condition.

22

Table of Contents

If we do not effectively manage changes in our operations, our business may be harmed; we have taken substantial restructuring charges in the past and we may need to take material restructuring charges in the future.

        In recent years, we have experienced growth in our business through a combination of internal growth and acquisitions. However, our business also has been negatively impacted by the recent adverse global economic conditions. The expansion of our business, as well as business contractions and other changes in our customers' requirements, have in the past, and may in the future, require that we adjust our business and cost structures by incurring restructuring charges. Restructuring activities involve reductions in our workforce at some locations and closure of certain facilities. All of these changes have in the past placed, and may in the future place, considerable strain on our management control systems and resources, including decision support, accounting management, information systems and facilities. If we do not properly manage our financial and management controls, reporting systems and procedures to manage our employees, our business could be harmed.

        In recent years, including during fiscal 2013, we undertook initiatives to restructure our business operations through a series of restructuring activities, which were intended to realign our global capacity and infrastructure with demand by our OEM customers and thereby improve our operational efficiency. These activities included reducing excess workforce and capacity, transitioning manufacturing to lower-cost locations and eliminating redundant facilities, and consolidating and eliminating certain administrative facilities.

        While we incur severance, asset impairment charges and other facilities charges as a result of changes in our customer mix on an ongoing basis, such individual actions were not considered material to be separately disclosed as restructuring charges in fiscal year 2012 and 2011, and are included in either cost of sales or selling, general and administrative expenses, as appropriate. Our restructuring activities undertaken during fiscal 2013 have been disclosed separately on our statement of operations due to the significant nature of such activities. We may be required to take additional charges in the future to align our operations and cost structures with global economic conditions, market demands, cost competitiveness, and our geographic footprint as it relates to our customers' production requirements. We may consolidate certain manufacturing facilities or transfer certain of our operations to lower cost geographies. If we are required to take additional restructuring charges in the future, our operating results, financial condition, and cash flows could be adversely impacted. Additionally, there are other potential risks associated with our restructurings that could adversely affect us, such as delays encountered with the finalization and implementation of the restructuring activities, work stoppages, and the failure to achieve targeted cost savings.

The success of certain of our activities depends on our ability to protect our intellectual property rights; intellectual property infringement claims against our customers or us could harm our business.

        We retain certain intellectual property rights to some of the technologies that we develop as part of our engineering, design and manufacturing services and components offerings. The measures we have taken to prevent unauthorized use of our technology may not be successful. If we are unable to protect our intellectual property rights, this could reduce or eliminate the competitive advantages of our proprietary technology, which would harm our business.

        Our engineering, design and manufacturing services and components offerings involve the creation and use of intellectual property rights, which subject us to the risk of claims of intellectual property infringement from third parties, as well as claims arising from the allocation of intellectual property rights among us and our customers. In addition, our customers are increasingly requiring us to indemnify them against the risk of intellectual property infringement. If any claims are brought against us or our customers for such infringement, whether or not these have merit, we could be required to expend significant resources in defense of such claims. In the event of such an infringement claim, we

23

Table of Contents

may be required to spend a significant amount of money to develop non-infringing alternatives or obtain licenses. We may not be successful in developing such alternatives or obtaining such licenses on reasonable terms or at all.

Fluctuations in foreign currency exchange rates could increase our operating costs.

        Our manufacturing operations and industrial parks are located in lower cost regions of the world, such as Asia, Eastern Europe and Mexico; however, most of our purchase and sale transactions are denominated in United States dollars, Japanese yen or Euros. As a result, we are exposed to fluctuations in the functional currencies of our fixed cost overhead or our supply base relative to the currencies in which we conduct transactions.

        Currency exchange rates fluctuate on a daily basis as a result of a number of factors, including changes in a country's political and economic policies. Volatility in the functional and non-functional currencies of our entities and the United States dollar could seriously harm our business, operating results and financial condition. The primary impact of currency exchange fluctuations is on the cash, receivables, and payables of our operating entities. As part of our currency hedging strategy, we use financial instruments, primarily forward exchange and swap contracts, to hedge our United States dollar and other currency commitments in order to reduce the short-term impact of foreign currency fluctuations on current assets and liabilities. If our hedging activities are not successful or if we change or reduce these hedging activities in the future, we may experience significant unexpected expenses from fluctuations in exchange rates.

        We are also exposed to risks related to the valuation of the Chinese currency relative to other foreign currencies. The Chinese currency is the renminbi ("RMB"). A significant increase in the value of the RMB could adversely affect our financial results and cash flows by increasing both our manufacturing costs and the costs of our local supply base.

We depend on our executive officers and skilled management personnel.

        Our success depends to a large extent upon the continued services of our executive officers. Generally our employees are not bound by employment or non-competition agreements, and we cannot assure you that we will retain our executive officers and other key employees. We could be seriously harmed by the loss of any of our executive officers or other key employees. We will need to recruit and retain skilled management personnel, and if we are not able to do so, our business could be harmed. In addition, in connection with expanding our design services offerings, we must attract and retain experienced design engineers. There is substantial competition in our industry for highly skilled employees. Our failure to recruit and retain experienced design engineers could limit the growth of our design services offerings, which could adversely affect our business.

Our failure to comply with environmental laws could adversely affect our business.

        We are subject to various federal, state, local and foreign environmental laws and regulations, including regulations governing the use, storage, discharge and disposal of hazardous substances used in our manufacturing processes. We are also subject to laws and regulations governing the recyclability of products, the materials that may be included in products, and our obligations to dispose of these products after end users have finished with them. Additionally, we may be exposed to liability to our customers relating to the materials that may be included in the components that we procure for our customers' products. Any violation or alleged violation by us of environmental laws could subject us to significant costs, fines or other penalties.

        We are also required to comply with an increasing number of global and local product environmental compliance regulations focused on the restriction of certain hazardous substances. We are subject to the EU directives, including the Restrictions on RoHS, the WEEE as well as the EU's

24

Table of Contents

REACH regulation. In addition, new technical classifications of e-Waste being discussed in the Basel Convention technical working group could affect both our customers abilities and obligations in electronics repair and refurbishment. Also of note is China's Management Methods for Controlling Pollution Caused by EIPs regulation, commonly referred to as "China RoHS", which restricts the importation into and production within China of electrical equipment containing certain hazardous materials. Similar legislation has been or may be enacted in other jurisdictions, including in the United States. RoHS and other similar legislation bans or restricts the use of lead, mercury and certain other specified substances in electronics products and WEEE requires EU importers and/or producers to assume responsibility for the collection, recycling and management of waste electronic products and components. We have developed rigorous risk mitigating compliance programs designed to meet the needs of our customers as well as applicable regulations. These programs may include collecting compliance data from our suppliers, full laboratory testing and public reporting of other environmental metrics such as carbon emissions, electronic waste and water, and we also require our supply chain to comply. Non-compliance could potentially result in significant costs and/or penalties. In the case of WEEE, the compliance responsibility rests primarily with the EU importers and/or producers rather than with EMS companies. However, OEMs may turn to EMS companies for assistance in meeting their obligations under WEEE.

        In addition, we are responsible for cleanup of contamination at some of our current and former manufacturing facilities and at some third party sites. If more stringent compliance or cleanup standards under environmental laws or regulations are imposed, or the results of future testing and analyses at our current or former operating facilities indicate that we are responsible for the release of hazardous substances into the air, ground and/or water, we may be subject to additional liability. Additional environmental matters may arise in the future at sites where no problem is currently known or at sites that we may acquire in the future. Our failure to comply with environmental laws and regulations or adequately address contaminated sites could limit our ability to expand our facilities or could require us to incur significant expenses, which would harm our business.

We may encounter difficulties with acquisitions, which could harm our business.

        We have completed numerous acquisitions of businesses and we may acquire additional businesses in the future. Any future acquisitions may require additional equity financing, which could be dilutive to our existing shareholders, or additional debt financing, which could increase our leverage and potentially affect our credit ratings. Any downgrades in our credit ratings associated with an acquisition could adversely affect our ability to borrow by resulting in more restrictive borrowing terms. As a result of the foregoing, we also may not be able to complete acquisitions or strategic customer transactions in the future to the same extent as in the past, or at all.

        To integrate acquired businesses, we must implement our management information systems, operating systems and internal controls, and assimilate and manage the personnel of the acquired operations. The difficulties of this integration may be further complicated by geographic distances. The integration of acquired businesses may not be successful and could result in disruption to other parts of our business. In addition, the integration of acquired businesses may require that we incur significant restructuring charges.

        In addition, acquisitions involve numerous risks and challenges, including:

•

diversion of management's attention from the normal operation of our business;



•

potential loss of key employees and customers of the acquired companies;



•

difficulties managing and integrating operations in geographically dispersed locations;



•

the potential for deficiencies in internal controls at acquired companies;

25

Table of Contents

•

increases in our expenses and working capital requirements, which reduce our return on invested capital;



•

lack of experience operating in the geographic market or industry sector of the acquired business; and



•

exposure to unanticipated liabilities of acquired companies.

        These and other factors have harmed, and in the future could harm, our ability to achieve anticipated levels of profitability at acquired operations or realize other anticipated benefits of an acquisition, and could adversely affect our business and operating results.

Our strategic relationships with major customers create risks.

        In the past, we have completed numerous strategic transactions with OEM customers. Under these arrangements, we generally acquire inventory, equipment and other assets from the OEM, and lease or acquire their manufacturing facilities, while simultaneously entering into multi-year manufacturing and supply agreements for the production of their products. We may pursue these OEM divestiture transactions in the future. These arrangements entered into with divesting OEMs typically involve many risks, including the following:

•

we may need to pay a purchase price to the divesting OEMs that exceeds the value we ultimately may realize from the future business of the OEM;



•

the integration of the acquired assets and facilities into our business may be time-consuming and costly, including the incurrence of restructuring charges;



•

we, rather than the divesting OEM, bear the risk of excess capacity at the facility;



•

we may not achieve anticipated cost reductions and efficiencies at the facility;



•

we may be unable to meet the expectations of the OEM as to volume, product quality, timeliness and cost reductions;



•

our supply agreements with the OEMs generally do not require any minimum volumes of purchase by the OEMs, and the actual volume of purchases may be less than anticipated; and



•

if demand for the OEMs' products declines, the OEM may reduce its volume of purchases, and we may not be able to sufficiently reduce the expenses of operating the facility or use the facility to provide services to other OEMs.

        As a result of these and other risks, we have been, and in the future may be, unable to achieve anticipated levels of profitability under these arrangements. In addition, these strategic arrangements have not, and in the future may not, result in any material revenues or contribute positively to our earnings per share.

Our business and operations could be adversely impacted by climate change initiatives.

        Concern over climate change has led to international legislative and regulatory initiatives directed at limiting carbon dioxide and other greenhouse gas emissions. Proposed and existing efforts to address climate change by reducing greenhouse gas emissions could directly or indirectly affect our costs of energy, materials, manufacturing, distribution, packaging and other operating costs, which could impact our business and financial results.

Our operating results may fluctuate significantly due to seasonal demand.

        Two of our significant end markets are the mobile devices market and the consumer devices market. These markets exhibit particular strength in the two quarters leading up to the end of the

26

Table of Contents

calendar year in connection with the holiday season. As a result, we have historically experienced stronger revenues in our second and third fiscal quarters as compared to our other fiscal quarters. Economic or other factors leading to diminished orders in the end of the calendar year could harm our business.

Our debt level may create limitations.

        As of March 31, 2013, our total debt was approximately $2.1 billion. This level of indebtedness could limit our flexibility as a result of debt service requirements and restrictive covenants, and may limit our ability to access additional capital or execute our business strategy.

Changes in our credit rating may make it more expensive for us to raise additional capital or to borrow additional funds.

        Our credit is rated by credit rating agencies. Our 4.625% Notes and our 5.000% Notes are currently rated BB+ by Standard and Poor's ("S&P") and Ba1 by Moody's, and are considered to be below "investment grade" debt by Moody's and S&P. Any further decline in our credit rating may make it more expensive for us to raise additional capital in the future on terms that are acceptable to us, if at all; negatively impact the price of our common stock; increase our interest payments under some of our existing debt agreements; and have other negative implications on our business, many of which are beyond our control. In addition, the interest rate payable on some of our credit facilities is subject to adjustment from time to time if our credit ratings change. Thus, any potential future negative change in our credit rating may increase the interest rate payable on these credit facilities.

Weak global economic conditions and instability in financial markets may adversely affect our business, results of operations, financial condition and access to capital markets.

        Our revenue and gross margin depend significantly on general economic conditions and the demand for products in the markets in which our customers compete. Recent adverse worldwide economic conditions, including the European sovereign debt crisis, have created challenging conditions in the electronics industry. These conditions have resulted in reduced consumer and business confidence and spending in many countries, a tightening in the credit markets, a low level of liquidity in many financial markets and high volatility in credit, fixed income and equity markets. A continuation or worsening of the European sovereign debt crisis will likely have a negative effect on certain of our European customers and suppliers, which could harm our business. In addition, longer term disruptions in the capital and credit markets could adversely affect our access to liquidity needed for our business. If financial institutions that have extended credit commitments to us are adversely affected by the conditions of the U.S. and international capital markets, they may become unable to fund borrowings under their credit commitments to us, which could have an adverse impact on our financial condition and our ability to borrow additional funds, if needed, for working capital, capital expenditures, acquisitions, research and development and other corporate purposes.

The market price of our ordinary shares is volatile.

        The stock market in recent years has experienced significant price and volume fluctuations that have affected the market prices of companies, including technology companies. These fluctuations have often been unrelated to or disproportionately impacted by the operating performance of these companies. The market for our ordinary shares has been and may in the future be subject to similar volatility. Factors such as fluctuations in our operating results, announcements of technological innovations or events affecting other companies in the electronics industry, currency fluctuations, general market fluctuations, and macro-economic conditions may cause the market price of our ordinary shares to decline.

27

Table of Contents

The Company's goodwill and identifiable intangible assets could become impaired, which could reduce the value of its assets and reduce its net income in the year in which the write-off occurs.

        Goodwill represents the excess of the cost of an acquisition over the fair value of the assets acquired. The Company also ascribes value to certain identifiable intangible assets, which consist primarily of customer relationships and trade names, among others, as a result of acquisitions. The Company may incur impairment charges on goodwill or identifiable intangible assets if it determines that the fair values of goodwill or identifiable intangible assets are less than their current carrying values. The Company evaluates, on a regular basis, whether events or circumstances have occurred that indicate all, or a portion, of the carrying amount of goodwill may no longer be recoverable, in which case an impairment charge to earnings would become necessary.

        Refer to Notes 1 and 2 of the notes to the consolidated financial statements and 'critical accounting policies' in management's discussion and analysis of financial condition and results of operations for further discussion of the impairment testing of goodwill and identifiable intangible assets.

        A decline in general economic conditions or global equity valuations could impact the judgments and assumptions about the fair value of the Company's businesses and the Company could be required to record impairment charges on its goodwill or other identifiable intangible assets in the future, which could impact the Company's consolidated balance sheet, as well as the Company's consolidated statement of operations. If the Company was required to recognize an impairment charge in the future, the charge would not impact the Company's consolidated cash flows, current liquidity, capital resources, and covenants under its existing credit facilities, asset securitization program, and other outstanding borrowings.

Failure to comply with domestic or international employment and related laws could result in the payment of significant damages, which would reduce our net income.

        We are subject to a variety of domestic and foreign employment laws, including those related to safety, wages and overtime, discrimination, whistle-blowing, classification of employees and severance payments. Enforcement activity relating to these laws, particularly outside of the United States, can increase as a result of increased media attention due to violations by other companies, changes in law, political and other factors. There can be no assurance that we won't be found to have violated such laws in the future, due to a more aggressive enforcement posture by governmental authorities or for any other reason. Any such violations could lead to the assessment of fines against us by federal, state or foreign regulatory authorities or damages payable to employees, which fines could be substantial and which would reduce our net income.

ITEM 1B.    UNRESOLVED STAFF COMMENTS

        None.

ITEM 2.    PROPERTIES

        Our facilities consist of a global network of industrial parks, regional manufacturing operations, and design, engineering and product introduction centers, providing over 27.6 million square feet of productive capacity as of March 31, 2013. We own facilities with approximately 8.7 million square feet in Asia, 4.4 million square feet in the Americas and 2.4 million square feet in Europe. We lease facilities with approximately 6.6 million square feet in Asia, 3.3 million square feet in the Americas and 2.2 million square feet in Europe.

        Our facilities include large industrial parks, ranging in size from under 100,000 to 4.1 million square feet in Brazil, China, Hungary, Indonesia, Israel, Malaysia, Mexico, Poland, Romania, Slovakia,

28

Table of Contents

and Ukraine. We also have regional manufacturing operations, generally ranging in size from under 100,000 to approximately 2.7 million square feet in Austria, Brazil, Canada, China, Denmark, France, Germany, Hong Kong, Hungary, India, Ireland, Italy, Japan, Malaysia, Mexico, Norway, Singapore, Sweden, Ukraine and the United States. We also have smaller design and engineering centers and product introduction centers at a number of locations in the world's major electronics markets.

        Our facilities are well maintained and suitable for the operations conducted. The productive capacity of our plants is adequate for current needs.

ITEM 3.    LEGAL PROCEEDINGS

        From time to time, we are subject to legal proceedings, claims, and litigation arising in the ordinary course of business. We defend ourselves vigorously against any such claims. Although the outcome of these matters is currently not determinable, management expects that any losses that are probable or reasonably possible of being incurred as a result of these matters, which are in excess of amounts already accrued in its consolidated balance sheets would not be material to the financial statements as a whole.

ITEM 4.    MINE SAFETY DISCLOSURES

        Not applicable

29

Table of Contents

PART II

ITEM 5.    MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED SHAREHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

PRICE RANGE OF ORDINARY SHARES

        Our ordinary shares are quoted on the NASDAQ Global Select Market under the symbol "FLEX." The following table sets forth the high and low per share sales prices for our ordinary shares since the beginning of fiscal year 2012 as reported on the NASDAQ Global Select Market.

        As of May 16, 2013 there were 3,528 holders of record of our ordinary shares and the closing sales price of our ordinary shares as reported on the NASDAQ Global Select Market was $7.22 per share.

DIVIDENDS

        Since inception, we have not declared or paid any cash dividends on our ordinary shares. We presently do not have plans to pay any dividends in the near future.

STOCK PRICE PERFORMANCE GRAPH

        The following stock price performance graph and accompanying information is not deemed to be "soliciting material" or to be "filed" with the SEC or subject to Regulation 14A under the Securities Exchange Act of 1934 or to the liabilities of Section 18 of the Securities Exchange Act of 1934, and will not be deemed to be incorporated by reference into any filing under the Securities Act of 1933 or the Securities Exchange Act of 1934, regardless of any general incorporation language in any such filing.

        The graph below compares the cumulative total shareholder return on our ordinary shares, the Standard & Poor's 500 Stock Index and a peer group comprised of Benchmark Electronics, Inc., Celestica, Inc., Jabil Circuit, Inc., and Sanmina-SCI Corporation.

        The graph below assumes that $100 was invested in our ordinary shares, in the Standard & Poor's 500 Stock Index and in the peer group described above on March 31, 2008 and reflects the annual return through March 31, 2013, assuming dividend reinvestment.

        The comparisons in the graph below are based on historical data and are not indicative of, or intended to forecast, the possible future performances of our ordinary shares.

30

Table of Contents

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN
Flextronics, the S&P 500 Index, and Peer Group

Prepared by Zacks Investment Research, Inc. Used with permission. All rights reserved. Copyright 1980-2013

Index Data: Copyright Standard and Poor's, Inc. Used with permission. All rights reserved.

Issuer Purchases of Equity Securities

        The following table provides information regarding purchases of our ordinary shares made by us for the period from January 1, 2013 through March 31, 2013.

31

Table of Contents

RECENT SALES OF UNREGISTERED SECURITIES

        None.

INCOME TAXATION UNDER SINGAPORE LAW

        Dividends.    Singapore does not impose a withholding tax on dividends. All dividends are tax exempt to shareholders.

        Gains on Disposal.    Under current Singapore tax law there is no tax on capital gains, thus any profits from the disposal of shares are not taxable in Singapore unless the gains arising from the disposal of shares are income in nature and subject to tax, especially if they arise from activities which the Inland Revenue Authority of Singapore regards as the carrying on of a trade or business in Singapore (in which case, the profits on the sale would be taxable as trade profits rather than capital gains).

        Shareholders who apply, or who are required to apply, the Singapore Financial Reporting Standard 39 Financial Instruments—Recognition and Measurement ("FRS 39") for the purposes of Singapore income tax may be required to recognize gains or losses (not being gains or losses in the nature of capital) in accordance with the provisions of FRS 39 (as modified by the applicable provisions of Singapore income tax law) even though no sale or disposal of shares is made.

        Stamp Duty.    There is no stamp duty payable for holding shares, and no duty is payable on the acquisition of newly-issued shares. When existing shares are acquired in Singapore, a stamp duty is payable on the instrument of transfer of the shares at the rate of two Singapore dollars ("S$") for every S$1,000 of the market value of the shares. The stamp duty is borne by the purchaser unless there is an agreement to the contrary. If the instrument of transfer is executed outside of Singapore, the stamp duty must be paid only if the instrument of transfer is received in Singapore.

        Estate Taxation.    The estate duty was abolished for deaths occurring on or after February 15, 2008. For deaths prior to February 15, 2008 the following rules apply:

        If an individual who is not domiciled in Singapore dies on or after January 1, 2002, no estate tax is payable in Singapore on any of our shares held by the individual.

        If property passing upon the death of an individual domiciled in Singapore includes our shares, Singapore estate duty is payable to the extent that the value of the shares aggregated with any other assets subject to Singapore estate duty exceeds S$600,000. Unless other exemptions apply to the other assets, for example, the separate exemption limit for residential properties, any excess beyond S$600,000 will be taxed at 5% on the first S$12,000,000 of the individual's chargeable assets and thereafter at 10%.

        An individual shareholder who is a U.S. citizen or resident (for U.S. estate tax purposes) will have the value of the shares included in the individual's gross estate for U.S. estate tax purposes. An individual shareholder generally will be entitled to a tax credit against the shareholder's U.S. estate tax to the extent the individual shareholder actually pays Singapore estate tax on the value of the shares; however, such tax credit is generally limited to the percentage of the U.S. estate tax attributable to the inclusion of the value of the shares included in the shareholder's gross estate for U.S. estate tax purposes, adjusted further by a pro rata apportionment of available exemptions. Individuals who are domiciled in Singapore should consult their own tax advisors regarding the Singapore estate tax consequences of their investment.

32

Table of Contents

        Tax Treaties Regarding Withholding.    There is no reciprocal income tax treaty between the U.S. and Singapore regarding withholding taxes on dividends and capital gains.

ITEM 6.    SELECTED FINANCIAL DATA

        These historical results are not necessarily indicative of the results to be expected in the future. The following selected consolidated financial data set forth below was derived from our historical audited consolidated financial statements and is qualified by reference to and should be read in conjunction with Item 7, "Management's Discussion and Analysis of Financial Condition and Results of Operations" and Item 8, "Financial Statements and Supplementary Data."

33

Table of Contents

34

Table of Contents

ITEM 7.    MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

        This report on Form 10-K contains forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended, and Section 27A of the Securities Act of 1933, as amended. The words "expects," "anticipates," "believes," "intends," "plans" and similar expressions identify forward-looking statements. In addition, any statements which refer to expectations, projections or other characterizations of future events or circumstances are forward-looking statements. We undertake no obligation to publicly disclose any revisions to these forward-looking statements to reflect events or circumstances occurring subsequent to filing this Form 10-K with the Securities and Exchange Commission. These forward-looking statements are subject to risks and uncertainties, including, without limitation, those discussed in this section and in Item 1A, "Risk Factors." In addition, new risks emerge from time to time and it is not possible for management to predict all such risk factors or to assess the impact of such risk factors on our business. Accordingly, our future results may differ materially from historical results or from those discussed or implied by these forward-looking statements. Given these risks and uncertainties, the reader should not place undue reliance on these forward-looking statements.

OVERVIEW

        We are a leading global supply chain solutions provider, offering advanced design, manufacturing and logistics and after-sales services to OEMs of a broad range of electronics products in the following markets: High Reliability Solutions ("HRS"), which is comprised of our medical, automotive, and defense and aerospace businesses; High Velocity Solutions ("HVS"), which includes our mobile devices business, including smart phones, and consumer electronics, including game consoles, high-volume computing business, including notebook personal computing ("PC"), tablets and printers; Industrial and Emerging Industries ("IEI"), which is comprised of large household appliances, equipment, and our emerging industries businesses; and Integrated Network Solutions ("INS"), which includes our telecommunications infrastructure, data networking, connected home, and server and storage businesses.

        Our strategy is to provide customers with a full range of cost competitive, vertically-integrated global supply chain services through which the we can design, build, ship and service a complete packaged product for our OEM customers. This enables our OEM customers to leverage our services to meet their product requirements throughout the entire product life cycle.

        Historically, our industry experienced significant change and growth as an increasing number of companies elected to outsource some or all of their design and manufacturing requirements. We have seen an increase in the penetration of the global OEM manufacturing requirements since the 2001 - 2002 technology downturn as more and more OEMs pursued the benefits of outsourcing rather than internal manufacturing. Due to the global economic crisis, which began in late calendar year 2007 and continued through the end of our fiscal year 2010, many of our OEM customers reduced their manufacturing and supply chain outsourcing which negatively impacted our business. During our fiscal year 2011, we began seeing some positive signs that demand for our OEM customers' end products was improving, and this trend continued through the end of our 2013 fiscal year. However, our revenues in fiscal 2013 declined primarily as a result of our exit from the high volume and low margin ("ODM") PC business, which we fully exited by the end of fiscal 2012, and from a reduction of concentration of business with a well known smart phone OEM.

        We use a portfolio management approach to manage our extensive service offerings. As our OEM customers change in the way they go to market, we reorganize and rebalance our business portfolio in order to align with our customers' needs and requirements and to optimize our operating results. As part of our portfolio management strategy, we have decreased the percentage of our revenue from our

35

Table of Contents

lower margin HVS businesses by exiting our ODM PC business in fiscal 2012 and assembly disengagement with a well known smart phone OEM in fiscal 2013. Over the past few years, we have experienced increased revenue in our more complex and higher margin business groups (HRS, IEI, and INS) together with new business opportunities. Although our recent acquisition of certain manufacturing operations from Google's Motorola Mobility LLC is expected to increase the percentage of our revenues from the HVS market in fiscal year 2014 and beyond, we do not expect the percentage of revenues from our HVS business to approach the concentration experienced in fiscal year 2011 and prior. The objective of our operating model is to allow us to redeploy and reposition our assets and resources to meet specific customer needs across all of the markets we serve, and we have been able to successfully reposition HVS assets and capacity to serve our customers in other business groups as required which illustrates the overall flexibility of our model.

        We are one of the world's largest manufacturing service providers, with revenues of $23.6 billion in fiscal year 2013. We have established an extensive network of manufacturing facilities in the world's major electronics markets (Asia, the Americas and Europe) in order to serve the growing outsourcing needs of both multinational and regional OEMs. We design, build, ship, and service electronics products for our customers through a network of facilities in over 30 countries across four continents. As of March 31, 2013, our total manufacturing capacity was approximately 27.6 million square feet. In fiscal year 2013, our net sales in Asia, the Americas and Europe represented approximately 50%, 31% and 19%, respectively, of our total net sales, based on the location of the manufacturing site. The following tables set forth net sales and net property and equipment, by country, based on the location of our manufacturing sites and the relative percentages:

        We believe that the combination of our extensive design and engineering services, significant scale and global presence, end-to-end services, advanced supply chain management, industrial campuses in low-cost geographic areas and operational track record provide us with a competitive advantage in the market for designing, manufacturing and servicing electronics products for leading multinational and regional OEMs. Through these services and facilities, we offer our OEM customers the ability to

36

Table of Contents

simplify their global product development, manufacturing process, and after sales services, and enable them to achieve meaningful time to market and cost savings.

        Our operating results are affected by a number of factors, including the following:

•

changes in the macro-economic environment and related changes in consumer demand;



•

the mix of the manufacturing services we are providing, the number and size of new manufacturing programs, the degree to which we utilize our manufacturing capacity, seasonal demand, shortages of components and other factors;



•

the effects on our business when our customers are not successful in marketing their products, or when their products do not gain widespread commercial acceptance;



•

our ability to achieve commercially viable production yields and to manufacture components in commercial quantities to the performance specifications demanded by our OEM customers;



•

the effects on our business due to our customers' products having short product life cycles;



•

our customers' ability to cancel or delay orders or change production quantities;



•

our customers' decision to choose internal manufacturing instead of outsourcing for their product requirements;



•

our exposure to financially troubled customers; and



•

integration of acquired businesses and facilities.

        We also are subject to other risks as outlined in Item 1A, "Risk Factors."

        Net revenues for fiscal year 2013 decreased 19.7% or $5.8 billion to $23.6 billion. This decline was primarily attributable to the disengagement of our assembly activities with a well known smart phone OEM and the exit of our ODM PC business, which resulted in decreases of approximately $2.2 billion and $1.6 billion, respectively. Our revenue deteriorated in all the major markets we serve except for HRS. By the end of fiscal year 2013, we continued to strive to maintain a competitive position driven in part by the success in our diversified business model. Our fiscal year 2013 gross profit totaled $1.2 billion, representing a decrease of $351.7 million, or 23.2%, compared to fiscal year 2012 primarily due to restructuring charges amounting to $215.8 million included in cost of sales in fiscal year 2013. Our income from continuing operations of $302.5 million was lower than the $520.8 million realized in fiscal year 2012 primarily due to restructuring charges incurred in fiscal 2013.

        Cash provided by operations increased approximately $311.2 million to $1.1 billion for fiscal year 2013 compared with $804.3 million for fiscal year 2012 primarily due to changes in operating assets and liabilities, net of acquisitions which decreased $315.9 million in fiscal year 2013 primarily as a result of a decrease in accounts receivable and inventory, offset by a decrease in accounts payable and other current and noncurrent liabilities. Our average net working capital, defined as accounts receivable plus the deferred purchase price receivable from our asset-backed securitization programs plus inventory less accounts payable, as a percentage of annual sales was approximately 7.8%, 6.2% and 4.5% for the years ended March 31, 2013, 2012 and 2011, respectively. The increase in the percentage for the year ended March 31, 2013 is primarily attributable to lower revenue from our HVS business as a result of our exit of our ODM PC business, which historically carries significantly higher inventory turns and customers with contractually faster payment terms, offset by lower accounts receivable, deferred purchase price receivables and inventories in fiscal year 2013. Our free cash flow, which we define as cash from operating activities less net purchases of property and equipment, was $680.1 million for fiscal year 2013 compared to $416.3 million for fiscal year 2012, primarily due to higher cash flows from operations partially off-set by higher capital expenditures. Refer to the Liquidity and Capital Resources section for the free cash flows reconciliation to our most direct comparable GAAP financial measure of

37

Table of Contents

cash flows from operations. Cash used in financing activities amounted to $339.6 million during fiscal year 2013 and included repurchases of approximately 49.9 million ordinary shares at an aggregate purchase value of $322.0 million. As of March 31, 2013, $12.0 million was included in accrued expenses for approximately 1.8 million ordinary shares that were not settled in fiscal year 2013.

        Throughout fiscal year 2013, we continued to further transform our business as we exited certain non-core businesses and executed certain restructuring activities to consolidate and rationalize our global manufacturing capacity and infrastructure. During fiscal year 2013, we finalized the sale of two of our non-core businesses and received proceeds from these sales amounting to $22.6 million, net of $1.0 million of cash sold. The results of operations and financial position of the divested businesses are reported as discontinued operations for all periods presented and include a $17.0 million charge in fiscal 2012 for the impairment of fixed assets and $10.0 million charge for impairment of customer-related intangible assets in fiscal 2013.

        Additionally, in response to a challenging macroeconomic environment, we initiated certain restructuring activities in fiscal 2013 intended to improve our operational efficiencies by reducing excess workforce and capacity. The restructuring activities are intended to rationalize our global manufacturing capacity and infrastructure and will result in a further shift of manufacturing capacity to locations with higher efficiencies. During the year ended March 31, 2013, we recognized $227.4 million of pre-tax restructuring charges comprised of $123.0 million of cash charges predominantly related to employee severance costs and $104.4 million of non-cash charges primarily related to asset impairment and other exit charges. We expect to recognize an additional $40.0 million in pre-tax restructuring charges in our first quarter of fiscal 2014, comprised primarily of cash charges associated with employee termination costs to be classified as a component of cost of sales.

        We believe that our business transformation has strategically positioned us very well to take advantage of the long-term, future growth prospects for outsourcing of advanced manufacturing capabilities, design and engineering services and after-market services, which remain strong.

CRITICAL ACCOUNTING POLICIES AND ESTIMATES

        The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America ("U.S. GAAP" or "GAAP") requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, the disclosure of contingent assets and liabilities at the date of the financial statements, and the reported amounts of revenues and expenses during the reporting period. Actual results may differ from those estimates and assumptions.

        We believe the following critical accounting policies affect our more significant judgments and estimates used in the preparation of our consolidated financial statements. For further discussion of our significant accounting policies, refer to note 2 of the notes to consolidated financial statements in Item 8, "Financial Statements and Supplementary Data."

Revenue Recognition

        We recognize manufacturing revenue when we ship goods or the goods are received by our customer, title and risk of ownership have passed, the price to the buyer is fixed or determinable and recoverability is reasonably assured. Generally, there are no substantive customer acceptance requirements or further obligations related to manufacturing services. If such requirements or obligations exist, then we recognize the related revenues at the time when such requirements are completed and the obligations are fulfilled. We make provisions for estimated sales returns and other adjustments at the time revenue is recognized based upon contractual terms and an analysis of historical returns. These provisions were not material to our consolidated financial statements for any of the periods presented.

38

Table of Contents

        We provide a comprehensive suite of services for our customers that range from contract design services to manufacturing and logistics to repair services. We recognize service revenue when the services have been performed, and the related costs are expensed as incurred. Our net sales for services were less than 10% of our total sales for all periods presented, and accordingly, are included in net sales in the consolidated statements of operations.

Customer Credit Risk

        We have an established customer credit policy through which we manage customer credit exposures through credit evaluations, credit limit setting, monitoring, and enforcement of credit limits for new and existing customers. We perform ongoing credit evaluations of our customers' financial condition and make provisions for doubtful accounts based on the outcome of those credit evaluations. We evaluate the collectability of accounts receivable based on specific customer circumstances, current economic trends, and the age of past due receivables. To the extent we identify exposures as a result of credit or customer evaluations, we also review other customer related exposures, including but not limited to inventory and related contractual obligations. For example, subsequent to fiscal year 2012 and prior to issuance of our financial statements, the Company became aware that one of its customers in the concentrated solar photovoltaic market was experiencing significant financial and liquidity difficulties. Based on an evaluation of this customer's specific circumstances, the Company determined that its best estimate was that all accounts receivable and inventory related to this customer were unrecoverable and recorded a charge of $32.0 million as of March 31, 2012.

Restructuring Charges

        We recognize restructuring charges related to our plans to close or consolidate duplicate manufacturing and administrative facilities. In connection with these activities, we recognize restructuring charges for employee termination costs, long-lived asset impairment and other exit-related costs.

        The recognition of these restructuring charges requires that we make certain judgments and estimates regarding the nature, timing and amount of costs associated with the planned exit activity. To the extent our actual results in exiting these facilities differ from our estimates and assumptions, we may be required to revise the estimates of future liabilities, requiring the recognition of additional restructuring charges or the reduction of liabilities already recognized. At the end of each reporting period, we evaluate the remaining accrued balances to ensure that no excess accruals are retained and the utilization of the provisions are for their intended purpose in accordance with developed exit plans.

        Refer to note 12 of the notes to consolidated financial statements in Item 8, "Financial Statements and Supplementary Data" for further discussion of our restructuring activities.

Carrying Value of Long-Lived Assets

        We review property and equipment and acquired amortizable intangible assets for impairment whenever events or changes in circumstances indicate that the carrying amount of the asset may not be recoverable. An impairment loss is recognized when the carrying amount of these long-lived assets exceeds their fair value. Recoverability of property and equipment and acquired amortizable intangible assets are measured by comparing their carrying amount to the projected cash flows the assets are expected to generate. If such assets are considered to be impaired, the impairment loss recognized, if any, is the amount by which the carrying amount of the property and equipment and acquired amortizable intangible assets exceeds fair value.

        Goodwill is tested for impairment on an annual basis, and whenever events or changes in circumstances indicate that the carrying amount of goodwill may not be recoverable. Recoverability of goodwill is measured at the reporting unit level by comparing the reporting unit's carrying amount,

39

Table of Contents

including goodwill, to the fair value of the reporting unit, which is measured based upon, among other factors, market multiples for comparable companies as well as a discounted cash flow analysis. We have one reporting unit: EMS. If the recorded value of the assets, including goodwill, and liabilities ("net book value") of the reporting unit exceeds its fair value, an impairment loss may be required to be recognized. Further, to the extent the net book value of the Company as a whole is greater than its fair value in the aggregate, all, or a significant portion of its goodwill may be considered impaired.

Inventory Valuation

        Our inventories are stated at the lower of cost (on a first-in, first-out basis) or market value. Our industry is characterized by rapid technological change, short-term customer commitments and rapid changes in demand. We purchase our inventory based on forecasted demand, and we estimate write downs for excess and obsolete inventory based on our regular reviews of inventory quantities on hand, and the latest forecasts of product demand and production requirements from our customers. If actual market conditions or our customers' product demands are less favorable than those projected, additional provisions may be required. In addition, unanticipated changes in the liquidity or financial position of our customers and/or changes in economic conditions may require additional write downs for inventories due to our customers' inability to fulfill their contractual obligations with regard to inventory procured to fulfill customer demand.

Income Taxes

        Our deferred income tax assets represent temporary differences between the carrying amount and the tax basis of existing assets and liabilities which will result in deductible amounts in future years, including net operating loss carry forwards. Based on estimates, the carrying value of our net deferred tax assets assumes that it is more likely than not that we will be able to generate sufficient future taxable income in certain tax jurisdictions to realize these deferred income tax assets. Our judgments regarding future profitability may change due to future market conditions, changes in U.S. or international tax laws and other factors. If these estimates and related assumptions change in the future, we may be required to increase or decrease our valuation allowance against deferred tax assets previously recognized, resulting in additional or lesser income tax expense.

        We are regularly subject to tax return audits and examinations by various taxing jurisdictions and around the world, and there can be no assurance that the final determination of any tax examinations will not be materially different than that which is reflected in our income tax provisions and accruals. Should additional taxes be assessed as a result of a current or future examination, there could be a material adverse effect on our tax position, operating results, financial position and cash flows. Refer to note 11 of the notes to consolidated financial statements in Item 8, "Financial Statements and Supplementary Data" for further discussion of our tax position.

RESULTS OF OPERATIONS

        The following table sets forth, for the periods indicated, certain statements of operations data expressed as a percentage of net sales. The financial information and the discussion below should be read in conjunction with the consolidated financial statements and notes thereto included in Item 8, "Financial Statements and Supplementary Data." The data below, and discussion that follows, represents our results from operations.

        During fiscal year 2013, the Company finalized the sale of two of its non-core businesses. Total proceeds received from these sales amounted to $22.6 million, net of $1.0 million of cash sold. The

40

Table of Contents

Company recognized a loss on sale of $12.1 million, which is included in interest and other expenses (income), net within the results from discontinued operations.

Net sales

        Net sales during fiscal year 2013 totaled $23.6 billion, representing a decrease of $5.8 billion, or 19.7%, from $29.3 billion during fiscal year 2012. Sales during fiscal year 2013 decreased across all of the markets we serve except for HRS consisting of decreases of: (i) $5.3 billion or 46.2% in the HVS market, (ii) $0.7 billion or 6.5% in the INS market and (iii) $0.2 billion or 3.9% in the IEI market. The decline in sales was primarily due to a decrease in the HVS market as a result of reduction in revenues due to our disengagement from our assembly business with a well known smart phone OEM customers, which resulted in an approximately $2.2 billion reduction of sales and our exit from the ODM PC business during fiscal 2012, which resulted in an approximately $1.6 billion reduction of sales. The remainder of the decrease across the other markets was attributable to reduced demand during fiscal year 2013. The decrease in these markets was partially offset by increase in sales from our HRS market group amounting to $0.5 billion or 19.5%, primarily due to increased demand for our customer products in the automotive market and to a lesser extent from our acquisition of Saturn Electronics and Engineering, Inc. in December 2012. Net sales decreased across all of the geographical regions we serve, consisting of decreases of $3.7 billion in Asia, $1.2 billion in the Americas and $0.9 billion in Europe.

        Net sales during fiscal year 2012 totaled $29.3 billion, representing an increase of $0.9 billion, or 3.2%, from $28.4 billion during fiscal year 2011. Sales during fiscal year 2012 increased across all of the markets we serve except for HVS, consisting of increases of: (i) $0.7 billion or 6.2% in the INS market, (ii) $0.5 billion or 24.2% in the HRS market, and (iii) $0.1 billion or 3.3% in the IEI market. The increase in sales for our INS market was driven by new program wins with existing customers with products in enterprise data networking and telecommunications infrastructure markets, offset by declining demand from certain customer programs in the server market due to the end of the product life cycles or which transitioned to another supplier. The increase in sales for our HRS market was driven primarily from new wins and programs with our larger customers in the automotive, medical equipment and drug delivery markets. The increase in sales for our IEI market was due to new customer wins and new programs with existing customers across this business group, primarily with

41

Table of Contents

customers serving the clean tech markets, offset by reduced demand from our customers serving the capital equipment markets. The increase in net sales for these markets was offset by a $0.4 billion or 3.0% decrease in sales in the HVS market due to a decrease in sales of mobile handsets to one of our significant customers, partially offset by an increase in sales through the first nine months of fiscal year 2012 to another significant customer in the ODM personal computing business which we exited in the third quarter of fiscal year 2012. Net sales increased across all of the geographical regions we serve, consisting of increases of $0.8 billion in Asia, $0.1 billion in the Americas and an insignificant increase in Europe.

        The following table sets forth net sales by market and their relative percentages:

        Our ten largest customers during fiscal years 2013, 2012 and 2011 accounted for approximately 47%, 55% and 52% of net sales, respectively. No customer accounted for greater than 10% of our net sales during fiscal year 2013. During fiscal year 2012 Hewlett-Packard (HP) and Research In Motion (RIM) each accounted for greater than 10% of net sales and during fiscal year 2011, RIM accounted for greater than 10% of net sales.

Gross profit

        Gross profit is affected by a number of factors, including the number and size of new manufacturing programs, product mix, component costs and availability, product life cycles, unit volumes, pricing, competition, new product introductions, capacity utilization and the expansion and consolidation of manufacturing facilities. The flexible design of our manufacturing processes allows us to build a broad range of products in our facilities and better utilize our manufacturing capacity. In the cases of new programs, profitability normally lags revenue growth due to product start-up costs, lower manufacturing program volumes in the start-up phase, operational inefficiencies, and under-absorbed overhead. Gross margin for these programs often improves over time as manufacturing volumes increase, as our utilization rates and overhead absorption improve, and as we increase the level of manufacturing services content. As a result of these various factors, our gross margin varies from period to period.

        Gross profit during fiscal year 2013 decreased $351.7 million to $1.2 billion from $1.5 billion during fiscal year 2012. Gross margin decreased to 4.9% of net sales in fiscal year 2013 as compared with 5.2% of net sales in fiscal year 2012. Gross margins deteriorated 30 basis points in fiscal year 2013 compared to that of fiscal year 2012 primarily due to restructuring charges amounting to $215.8 million, or 90 basis points, included in cost of sales. The impact of the restructuring charges was partially offset by lower sales from our HVS market which generally carry lower margins than the overall margins on our other complex business groups, and the $23.9 million accounting correction recognized in fiscal 2012 as discussed below.

        Gross profit during fiscal year 2012 decreased $65.4 million to $1.5 billion from $1.6 billion during fiscal year 2011. Gross margin decreased to 5.2% of net sales in fiscal year 2012 as compared with 5.6% of net sales in fiscal year 2011. The decreases in gross profit and gross margin were primarily attributable to a higher mix of low-margin products principally associated with the increase in sales of

42

Table of Contents

products in the ODM personal computing business during the first nine months of fiscal year 2012, which are included in the HVS market which we exited in the third quarter of fiscal year 2012. These businesses sustained gross losses of approximately $38.2 million in fiscal year 2012. Fiscal year 2012 cost of sales also includes the impact of adjustments made to correct certain accounting errors identified and recorded as out of period adjustments during the fourth quarter of fiscal year. These out-of period adjustments amounted to approximately $23.9 million and resulted in increased cost of sales in the fourth quarter of fiscal year 2012. In addition, gross margins were negatively impacted by unfavorable manufacturing costs associated with the exit of our ODM related businesses and costs incurred for right-sizing activities at various locations.

Restructuring charges

        In response to a challenging macroeconomic environment, we initiated certain restructuring activities to improve our operational efficiencies by reducing excess workforce and capacity. The restructuring activities are intended to rationalize our global manufacturing capacity and infrastructure and further shift manufacturing capacity to locations with higher efficiencies. During fiscal year 2013, we recognized $227.4 million of pre-tax restructuring charges comprised of $123.0 million of cash charges predominantly related to employee severance costs and $104.4 million of non-cash charges primarily related asset impairment and other exit charges. The restructuring charges by geographic region amounted to $108.4 million in Asia, $91.8 million in Europe and $27.2 million in the Americas. We classified $215.8 million of these charges as a component of cost of sales and $11.6 million of these charges as a component of selling, general and administrative expenses during fiscal year 2013. As of March 31, 2013, accrued costs related to restructuring charges incurred were $97.9 million, of which $87.8 million was classified as a current obligation. We do not anticipate a significant change to our previously announced restructuring plan and expect to recognize an additional $40.0 million in pre-tax restructuring charges in our first quarter of fiscal 2014, comprised primarily of cash charges associated with employee termination costs to be classified as a component of cost of sales. We expect these restructuring activities will allow for potential savings through reduced employee expenses and lower operating costs and to yield annualized cost reductions of approximately $150.0 million.

        Refer to note 12 of the notes to consolidated financial statements in Item 8, "Financial Statements and Supplementary Data" for further discussion of our restructuring activities.

Selling, general and administrative expenses

        Selling, general and administrative expenses ("SG&A") totaled $805.2 million or 3.4% of net sales, during fiscal year 2013, compared to $877.6 million, or 3.0% of net sales, during fiscal year 2012. The decrease in SG&A in dollars was primarily attributable to the elimination of costs relating to our ODM PC business which we fully exited during fiscal year 2012 and a $28 million provision for doubtful accounts recorded in fiscal 2012 related to a customer concentrated in the solar photovoltaic market that incurred significant financial and liquidity difficulties, The increase of SG&A expenses as a percentage of net sales is primarily attributable to lower revenues.

        Selling, general and administrative expenses, or SG&A, totaled $877.6 million or 3.0% of net sales, during fiscal year 2012, compared to $801.8 million, or 2.8% of net sales, during fiscal year 2011. The increases in SG&A in dollars and as a percentage of net sales were primarily attributable to the $28.0 million provision for doubtful accounts we recognized in connection with the financially distressed customer discussed above and certain other costs associated with the exit of our ODM related businesses during the third quarter of fiscal year 2012.

43

Table of Contents

Intangible amortization

        Amortization of intangible assets in fiscal year 2013 decreased by $20.1 million to $29.5 million from $49.6 million in fiscal year 2012 and decreased by $16.6 million in fiscal 2012 from $66.2 million in fiscal 2011. The decrease for both periods was primarily due to the use of the accelerated method of amortization for certain customer-related intangibles, which results in decreasing expense over time.

Other charges (income), net

        During fiscal year 2013, we recognized other income of $65.2 million primarily due to a gain from the fair value adjustment of $74.4 million of our warrants to purchase common shares of a supplier. These fully-vested warrants, which are derivative instruments, are to be fair valued at each reporting date with gains or losses from changes in fair value recognized in the statements of operations. The gain is offset by various losses from sale, or direct impairments of certain non-core equity investments and notes receivable, and losses from sales of international entities that are individually immaterial.

        During fiscal year 2012, we recognized a net gain of $20.0 million, in connection with the sale of certain international entities.

        During fiscal year 2011, we recognized charges totaling $6.3 million, consisting of a $13.2 million loss associated with the early redemption of our 6.25% Senior Subordinated Notes, and an $11.7 million loss in connection with the divestiture of certain international entities, offset by a gain of $18.6 million associated with the sale of an equity investment that was previously fully impaired.

Interest and other expense, net

        Interest and other expense, net was $56.3 million during fiscal year 2013, compared to $36.0 million during fiscal year 2012, an increase of $20.3 million that was primarily due to a decrease in gains on foreign exchange transactions. The decrease in gains on foreign exchange transactions is attributable to our cross-border foreign currency transactions and the revaluation of RMB denominated net asset positions of our U.S. dollar functional currency sites based in China. There can be no assurance that further gains from various arbitrage opportunities related to foreign exchange settlements in China will be available in the future.

        Interest and other expense, net was $36.0 million during fiscal year 2012, compared to $74.9 million during fiscal year 2011, a decrease of $38.9 million. The decrease in net expense was primarily due to a $39.2 million reduction in net interest expense principally from the expiration of interest rate swaps in January 2011, which had fixed rates greater than the floating rates underlying our borrowing arrangements and to a lesser extent to the refinancing of $542.1 million of certain subordinated notes during fiscal year 2011 with our lower rate revolving credit facility and Asia term loans. Gains on foreign exchange transactions increased $6.6 million during fiscal year 2012 as we continue to benefit from certain arbitrage opportunities related to foreign currency transactions and the revaluation of RMB denominated net asset positions for our U.S. functional currency sites based in China.

        We expect interest expense to increase during fiscal year 2014 as a result of our $1.0 billion of fixed rate debt issued in February 2013, which comprises $500 million of 4.625% notes and $500 million of 5.000% notes. Although these interest rates are fixed, such interest rates are higher than the interest rate of the variable rate debt that was repaid in February 2013, which bore a base rate plus a margin of 1.25% or LIBOR plus a margin of 2.25%.

Income taxes

        Certain of our subsidiaries have, at various times, been granted tax relief in their respective countries, resulting in lower income taxes than would otherwise be the case under ordinary tax rates.

44

Table of Contents

The consolidated effective tax rates were 8.0%, 9.4% and 3.5% for the fiscal years 2013, 2012 and 2011. The effective rate varies from the Singapore statutory rate of 17.0% as a result of recognition of earnings in different jurisdictions, operating loss carry forwards, income tax credits, previously established valuation allowances for deferred tax assets, liabilities for uncertain tax positions, as well as because of the effect of certain tax holidays and incentives granted to our subsidiaries primarily in China, Malaysia, Israel, and Singapore. We generate most of our revenues and profits from operations outside of Singapore. The effective tax rate for fiscal year 2013 varies from the effective rates for fiscal years 2012 and 2011 primarily as a result of changes in valuation allowances and liabilities for uncertain tax positions.

        We are regularly subject to tax return audits and examinations by various taxing jurisdictions and around the world, and there can be no assurance that the final determination of any tax examinations will not be materially different than that which is reflected in our income tax provisions and accruals. Should additional taxes be assessed as a result of a current or future examination, there could be a material adverse effect on our tax position, operating results, financial position and cash flows.

        See note 11, "Income Taxes," of the notes to consolidated financial statements included in Item 8, "Financial Statements and Supplementary Data" for further discussion.

Discontinued Operations

        Consistent with our strategy to evaluate the strategic and financial contributions of each of our operations and to focus on the primary growth objectives in our core manufacturing business activities, in fiscal year 2013, we finalized the sale of two of our non-core businesses. These non-core businesses represent separate asset groups and the divestitures qualify as discontinued operations, and accordingly, we have reported the results of operations and financial position of these businesses in discontinued operations within the consolidated statements of operations and the consolidated balance sheets for all periods presented.

        The results from discontinued operations were as follows:

        Net sales in fiscal year 2013 and fiscal year 2012 decreased $86.7 million and $110.0 million, respectively, as we decelerated operations while evaluating strategic alternatives for the businesses and due to the end of certain product life cycles. The increase in net loss during fiscal year 2012 is primarily attributable to a $17.0 million charge for impairment of fixed assets that were sold in the transaction. The impairment charge is included in cost of sales in the results of discontinued operations. We recognized a loss of $12.1 million as a result of the disposition of these non-core businesses in fiscal 2013 which is included in interest and other expense (income), net in the results from discontinued operations.

45

Table of Contents

LIQUIDITY AND CAPITAL RESOURCES

        As of March 31, 2013, we had cash and cash equivalents of $1.6 billion and bank and other borrowings of $2.1 billion. We have a $1.5 billion revolving credit facility, under which we had no borrowings outstanding as of March 31, 2013 and $140 million outstanding as of March 31, 2012.

        Our cash balances are held in numerous locations throughout the world. As of March 31, 2013, approximately half of our cash and cash equivalents were held by foreign subsidiaries outside of Singapore. Although substantially all of the amounts held outside of Singapore could be repatriated, under current laws, a significant amount could be subject to income tax withholdings. We provide for tax liabilities on these amounts for financial statement purposes, except for certain of our foreign earnings that are considered indefinitely reinvested outside of Singapore (approximately $457.7 million as of March 31, 2013). Repatriation could result in an additional income tax payment, however, our intent is to permanently reinvest these funds outside of Singapore and our current plans do not demonstrate a need to repatriate them to fund our operations in jurisdictions outside of where they are held. Where local restrictions prevent an efficient intercompany transfer of funds, our intent is that cash balances would remain outside of Singapore and we would meet our liquidity needs through ongoing cash flows, external borrowings, or both.

Fiscal Year 2013

        Cash provided by operating activities was $1.1 billion during fiscal year 2013, which resulted primarily from $277.1 million of net income for the period and $522.5 million of non-cash earnings adjustment items such as depreciation, amortization, impairment charges and stock-based compensation expense. We generated $315.9 million in cash as a result of decreases in operating assets and liabilities, net of acquisitions. Our changes in operating assets and liabilities, net of acquisitions is primarily due to a decrease of $519.1 million in accounts receivable and decrease of $596.1 million in inventory, which was partially offset by a decrease in accounts payable of $671.4 million and a decrease in other current and noncurrent liabilities of $189.5 million. The decreases in accounts receivable and inventory are primarily as a result of the decrease in sales in our HVS business, which generally carry higher volumes than our other complex business groups. The decrease in accounts payable is principally related to the decrease in inventory and timing of supplier payments.

        Cash used in investing activities during fiscal year 2013 was $697.2 million. This resulted primarily from $435.3 million in capital expenditures for equipment, net of proceeds on sales, and $184.1 million paid for the acquisition of four businesses during the fiscal year. We also spent approximately $115.3 million included in other investing cash flows, offset by the receipt of cash included in other financing activities further discussed below to purchase assets financed by a third party banking institution on behalf of a customer.

        Cash used in financing activities amounted to $339.6 million during fiscal year 2013, which was primarily attributable to the repurchase of approximately 49.9 million shares for an aggregate purchase value of approximately $322.0 million and repayment of the outstanding balance under our revolving line of credit of $140.0 million. These cash outflows were offset by the receipt of $101.9 million included in other financing activities to purchase assets financed by a third party banking institution on behalf of a customer.

Fiscal Year 2012

        Cash provided by operating activities was $804.3 million during fiscal year 2012, which resulted primarily from $488.8 million of net income for the period and $566.1 million of non-cash earnings adjustment items such as depreciation, amortization, impairment charges and stock-based compensation expense. We used $250.6 million in cash as a result of an increase in operating assets and liabilities, net of acquisitions. Our working capital accounts increased primarily due to a decrease of $750.2 million in

46

Table of Contents

accounts payable and an increase of $30.2 million in accounts receivable, which was partially offset by a decrease in inventory of $301.1 million principally due to the deceleration of sales in our HVS market, and an increase in deferred revenue and customer working capital advances of $249.8 million. The decrease in accounts payable is principally related to the decrease in inventory and timing of supplier payments.

        Cash used in investing activities during fiscal year 2012 was $481.4 million. This resulted primarily from $388.0 million in capital expenditures for equipment, net of proceeds on sales, and $92.3 million paid for three acquisitions completed during the year.

        Cash used in financing activities amounted to $522.2 million during fiscal year 2012, which was primarily attributable to the repurchase of approximately 81.7 million shares for an aggregate purchase value of approximately $509.8 million. During fiscal year 2012 we also repaid $20.0 million of debt outstanding on our $2.0 billion revolving credit facility.

Fiscal Year 2011

        Cash provided by operating activities was $857.3 million during fiscal year 2011, which resulted primarily from $596.2 million of net income for the period and $482.6 million of non-cash earnings adjustment items such as depreciation, amortization, impairment charges, and stock-based compensation expense. We used $221.5 million in cash as a result of an increase in operating assets and liabilities, net of acquisitions. Our working capital accounts increased primarily due to an increase of $664.7 million in inventories as a result of our increased production and anticipated growth, and an increase of $337.1 million in other current and non-current assets primarily attributable to $324.6 million in our deferred purchase price receivable associated with our receivables sales, which were partially offset by increases in accounts payable of $609.9 million and other current liabilities of $144.0 million, primarily driven by the timing of purchases and cash payments.

        Cash used in investing activities during fiscal year 2011 was $413.2 million. This resulted primarily from $393.9 million in capital expenditures for equipment, net of proceeds on sales, and $17.0 million, net of cash acquired, for contingent consideration and deferred purchase price payments related to four acquisitions, and payments related to two completed acquisitions. Cash used was partially offset by proceeds related to the sale of an equity investment for $18.6 million.

        Cash used in financing activities amounted to $641.7 million during fiscal year 2011. During the 2011 fiscal year, we repurchased approximately 65.4 million shares at an aggregate purchase value of $400.4 million, including accrued expenses. In August 2010, we paid $240.0 million to redeem the entire principal amount of the 1% Convertible Subordinated Notes at par plus accrued interest. In December 2010, we paid approximately $308.5 million to redeem the aggregate principal balance and redemption premium of our 6.25% Senior Subordinated Notes ("6.25% Notes") plus accrued interest. In addition, we made repayments of approximately $217.1 million related to our Global Asset-Backed Securitization program effective with the adoption of new accounting standards on April 1, 2010.

        The cash used in financing activities was partially offset by $379.0 million of additional borrowings under new Asia term loan agreements and $160.0 million of borrowings under our revolving line of credit. During September 2010, we entered into two new three-year term loan agreements with certain financial institutions based in Asia and borrowed $180.0 million in the aggregate. During February 2011, we entered into a new three-year term loan agreement with a financial institution based in Asia and borrowed $200.0 million in the aggregate.

47

Table of Contents

Key Liquidity Metrics

Free Cash flow

        We believe free cash flow is an important liquidity metric because it measures, during a given period, the amount of cash generated that is available to repay debt obligations, make investments, fund acquisitions, repurchase company shares and for certain other activities. Our free cash flow, which is calculated as cash provided by operations less net purchases of property and equipment, was $680.1 million, $416.3 million and $463.5 million for fiscal years 2013, 2012 and 2011, respectively. Free cash flow is not a measure of liquidity under generally accepted accounting principles in the United States, and may not be defined and calculated by other companies in the same manner. Free cash flow should not be considered in isolation or as an alternative to net cash provided by operating activities. Free cash flows reconcile to the most directly comparable GAAP financial measure of cash flows from operations as follows:

Cash Conversion Cycle

        Days in trade accounts receivable was calculated as the average accounts receivable for the current and prior quarter, excluding the reduction in accounts receivable resulting from non-cash accounts receivable sales, divided by annualized sales for the current quarter by day. During the fiscal year ended March 31, 2013, days in trade accounts receivable increased by 1 day to 46 days compared to the fiscal year ended March 31, 2012 primarily as a result of the decline in sales in the HVS market that contained shorter payment terms. Non-cash accounts receivable sales or deferred purchase price receivables included for the purposes of the calculation were $412.4 million, $514.9 million and $460.0 million for the years ended March 31, 2013, 2012 and 2011, respectively. Deferred purchase price receivables were recorded in other current assets in the consolidated balance sheets.

        Days in inventory was calculated as the average inventory for the current and prior quarter divided by annualized cost of sales for the current quarter by day. During the fiscal year ended March 31, 2013, days in inventory remained consistent at 52 days as compared to the fiscal year ended March 31, 2012. Our inventory turns were over the past two years negatively impacted by the decline in sales in the HVS market which carry significantly higher inventory turns than our corporate average inventory turns.

        Days in accounts payable was calculated as the average accounts payable for the current and prior quarter divided by annualized cost of sales for the current quarter by day. During the fiscal year ended

48

Table of Contents

March 31, 2013, days in accounts payable improved 2 days to 72 days compared to the fiscal year ended March 31, 2012 primarily due to timing of supplier payments.

        Our cash conversion cycle was calculated as days in trade receivables plus days in inventory, minus days in accounts payable and is a measure of how efficient we are at managing our working capital. For the fiscal year ended March 31, 2013, our cash conversion cycle improved 1 day to 26 days as compared with the fiscal year ended March 31, 2012 due to the factors affecting each of the components in the calculation discussed above.

        Liquidity is affected by many factors, some of which are based on normal ongoing operations of the business and some of which arise from fluctuations related to global economics and markets. Cash balances are generated and held in many locations throughout the world. Local government regulations may restrict our ability to move cash balances to meet cash needs under certain circumstances; however, any current restrictions are not material. We do not currently expect such regulations and restrictions to impact our ability to pay vendors and conduct operations throughout the global organization. We believe that our existing cash balances, together with anticipated cash flows from operations and borrowings available under our credit facilities, will be sufficient to fund our operations through at least the next twelve months.

        Future liquidity needs will depend on fluctuations in levels of inventory, accounts receivable and accounts payable, the timing of capital expenditures for new equipment, the extent to which we utilize operating leases for new facilities and equipment, and the levels of shipments and changes in the volumes of customer orders.

        Historically, we have funded operations from cash and cash equivalents generated from operations, proceeds from public offerings of equity and debt securities, bank debt and lease financings. We also sell designated pools of trade receivables under asset-backed securitization ("ABS") programs and sell certain trade receivables, which are in addition to the trade receivables sold in connection with these securitization agreements. During fiscal years 2013, 2012 and 2011 we received approximately $3.5 billion, $4.7 billion and $2.4 billion, respectively from sales of receivables under our ABS programs, and $1.1 billion, $2.0 billion and $2.5 billion, respectively from other sales of receivables. As of March 31, 2013 and 2012, the outstanding balance on receivables sold for cash was $720.5 million and $667.3 million, respectively, under all our accounts receivable sales programs, which are not included in our consolidated balance sheets.

        On February 20, 2013, the Company issued $500.0 million of 4.625% Notes due February 15, 2020 and $500.0 million of 5.000% Notes due February 15, 2023 (collectively the "Notes") in a private offering pursuant to Rule 144A and Regulation S under the Securities Act. The Company received net proceeds of approximately $990.6 million from the issuance and used those proceeds together with $9.4 million of cash on hand, to repay $1.0 billion of outstanding borrowings under its 2007 term loan facility. This refinancing extended the maturity and effectively converted $1.0 billion of the Company's floating rate debt to a fixed rate.

        We anticipate that we will enter into debt and equity financings, sales of accounts receivable and lease transactions to fund acquisitions and anticipated growth. The sale or issuance of equity or convertible debt securities could result in dilution to current shareholders. Further, we may issue debt securities that have rights and privileges senior to those of holders of ordinary shares, and the terms of this debt could impose restrictions on operations and could increase debt service obligations. This increased indebtedness could limit our flexibility as a result of debt service requirements and restrictive covenants, potentially affect our credit ratings, and may limit our ability to access additional capital or execute our business strategy. Any downgrades in credit ratings could adversely affect our ability to borrow as a result of more restrictive borrowing terms. We continue to assess our capital structure and evaluate the merits of redeploying available cash to reduce existing debt or repurchase ordinary shares.

49

Table of Contents

        On September 13, 2012, our Board of Directors authorized the repurchase of up to 10% of our outstanding ordinary shares which was approved by our shareholders at the 2012 Extraordinary General Meeting held on August 30, 2012. Share repurchases by us under the share repurchase plans are subject to an aggregate limit of 10% of our ordinary shares outstanding as of the date of the 2012 Extraordinary General Meeting. During fiscal year 2013, we repurchased approximately 31.3 million shares for an aggregate purchase value of approximately $200.0 million under this plan, including accrued expenses, and retired all of these shares. During the first fiscal quarter of 2013, we repurchased the entire remaining amount under the plan that was approved by our Board of Directors on December 7, 2011, or approximately 20.4 million shares for an aggregate purchase value of approximately $134.0 million, and retired all of these shares.

CONTRACTUAL OBLIGATIONS AND COMMITMENTS

        As discussed above, during fiscal 2013, the Company issued an aggregate amount of $1.0 billion in Notes which are senior unsecured obligations of the Company, rank equally with all of the Company's other existing and future senior and unsecured debt obligations, and are guaranteed, jointly and severally, fully and unconditionally on an unsecured basis, by each of the Company's 100% owned subsidiaries that guarantees indebtedness under, or is a borrower under, the Company's Term Loan Agreement and Revolving Line of Credit. These notes carry registration rights and we have an obligation to register these securities by November 17, 2013. As of March 31, 2013, we were in compliance with the covenants under these credit facilities. Interest on the Notes is payable semi-annually, commencing on August 15, 2013.

        The Company also has a five-year $2.0 billion credit facility consisting of a $1.5 billion revolving credit facility and a $500 million term loan, which expires in October 2016. As of March 31, 2013, there were no borrowings outstanding under the revolving credit facility. The credit facility requires that we maintain a maximum ratio of total indebtedness to EBITDA (earnings before interest expense, taxes, depreciation and amortization), and a minimum interest coverage ratio, as defined. As of March 31, 2013, we were in compliance with the covenants under the credit facility.

        We have approximately $687.8 million of borrowings outstanding under two term loan facilities as of March 31, 2013, including the Term Loan discussed above. Of these amounts, approximately $170.3 million matures in October 2014, and the remainder matures in October 2016. We do not need to make any payments on the term loan facility that matures in October 2014 and any payments thereafter through maturity are not significant. The term loan which matures in October 2016 is repayable in quarterly installments of $6.9 million through September 2013 and $10.3 million per quarter thereafter, with the remaining amount due at maturity. Both of these term loan facilities require that we maintain a maximum ratio of total indebtedness to EBITDA, and as of March 31, 2013, we were in compliance with the covenant.

        We also have approximately $375 million of borrowings outstanding under our Asia term loans as of March 31, 2013 which mature in September 2013 and February 2014. Quarterly repayments for these loans are not significant. These loans also require the Company maintain a maximum ratio of total indebtedness to EBITDA during the terms of the agreements. As of March 31, 2013, the Company was in compliance with the covenant.

        We and certain of our subsidiaries also have various uncommitted revolving credit facilities, lines of credit and other loans in the amount of $274.2 million in the aggregate under which there were no borrowings outstanding as of March 31, 2013.

        Refer to the discussion in note 6, "Bank Borrowings and Long-Term Debt" of the notes to consolidated financial statements for further details of the Company's debt obligations.

50

Table of Contents

        We have purchase obligations that arise in the normal course of business, primarily consisting of binding purchase orders for inventory related items and capital expenditures. Additionally, we have leased certain of our property and equipment under capital lease commitments, and certain of our facilities and equipment under operating lease commitments.

        Future payments due under our purchase obligations, debt including capital leases and related interest obligations and operating lease contracts are as follows:

        Interest on the credit facility that matures in October 2016, under which, as of March 31, 2013, we had $517.5 million outstanding under our term loan and no borrowings outstanding under the revolving credit facility, is based at our option on, either at (i) LIBOR plus the applicable margin for LIBOR loans ranging between 1.25% and 2.25%, based on the Company's credit ratings or (ii) the base rate (the greatest of the agent's prime rate, the federal funds rate plus 0.50% and LIBOR for a one-month interest period plus 1.00%) plus an applicable margin ranging between 0.25% and 1.25%, based on the Company's credit rating. Interest on the $375 million outstanding under our Asia term loans accrues at LIBOR plus 2.15% to 2.30%. Interest on the $170.3 million outstanding under our term loan facility that matures in October 2014 is based at our option on either (i) the base rate (the greater of the agent's prime rate or the federal funds rate plus 0.50%) plus a margin of 1.25%; or (ii) LIBOR plus a margin of 2.25%. Finally, our variable rate debt also includes demand notes and certain variable lines of credit. These credit lines are located throughout the world and variable interest is generally based on a spread over that country's inter-bank offering rate. Interest expense in the table above is estimated based on LIBOR for the applicable tenor as of March 31, 2013.

        We have excluded $230.0 million of liabilities for unrecognized tax benefits from the contractual obligations table as we cannot make a reasonably reliable estimate of the periodic settlements with the respective taxing authorities. See note 11, "Income Taxes" of the notes to consolidated financial statements for further details.

        Our purchase obligations can fluctuate significantly from period-to-period and can materially impact our future operating asset and liability balances, and our future working capital requirements. We intend to use our existing cash balances, together with anticipated cash flows from operations to fund our existing and future contractual obligations.

OFF-BALANCE SHEET ARRANGEMENTS

        We sell designated pools of trade receivables to unaffiliated financial institutions under our ABS programs, and in addition to cash, we receive a deferred purchase price receivable for each pool of the receivables sold. Each of these deferred purchase price receivables serves as additional credit support to the financial institutions and is recorded at its estimated fair value. As of March 31, 2013 and 2012,

51

Table of Contents

the fair value of our deferred purchase price receivable was approximately $412.4 million and $514.9 million, respectively. As of March 31, 2013 and 2012, the outstanding balance on receivables sold for cash was $720.5 million and $667.3 million, respectively, under all our accounts receivable sales programs, which are not included in our consolidated balance sheets. For further information see note 8 of our notes to the consolidated financial statements.

RECENT ACCOUNTING PRONOUNCEMENTS

        Refer to note 2 of the notes to the consolidated financial statements for recent accounting pronouncements.

ITEM 7A.    QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

        We have warrants to purchase common shares of a certain supplier, which create exposures for us related to market price volatility. We value these warrants using the Black-Scholes option-valuation model. For the three-months ended March 31, 2013, we used the following assumptions to value these warrants:

        These warrants were exercised and the underlying shares were sold subsequent to year end for total proceeds of $67.3 million resulting in a $7.1 million realized loss from the recorded value of $74.4 million as of March 31, 2013, that will be recognized during the Company's fiscal quarter ending June 28, 2013.

INTEREST RATE RISK

        A portion of our exposure to market risk for changes in interest rates relates to our investment portfolio, which consists of highly liquid investments with maturities of three months or less from original dates of purchase. We do not use derivative financial instruments in our investment portfolio. We place cash and cash equivalents with various major financial institutions and limit the amount of credit exposure to 20% of the issuer's or fund's total assets measured at the time of purchase or $10.0 million, whichever is greater. We protect our invested principal by limiting default risk, market risk and reinvestment risk. We mitigate default risk by investing in investment grade securities and by constantly positioning the portfolio to respond appropriately to a reduction in credit rating of any investment issuer, guarantor or depository to levels below the credit ratings dictated by our investment policy. The portfolio includes only marketable securities with active secondary or resale markets to ensure portfolio liquidity. Maturities of short-term investments are timed, whenever possible, to correspond with debt payments and capital investments. As of March 31, 2013, the outstanding amount in the investment portfolio was $0.5 billion, comprised mainly of money market funds with an average return of 3.1%. A hypothetical 10% change in interest rates would not be expected to have a material effect on our financial position, results of operations and cash flows over the next fiscal year.

        We had variable rate debt outstanding of approximately $1.1 billion as of March 31, 2013. Variable rate debt obligations consisted of borrowings under our term loan. Interest on these obligations is discussed above.

52

Table of Contents

        Our variable rate debt instruments create exposures for us related to interest rate risk. Primarily due to the current low interest rates a hypothetical 10% change in interest rates would not be expected to have a material effect on our financial position, results of operations and cash flows over the next fiscal year primarily due to the current low interest rates.

        As of March 31, 2013, the approximate fair value of our debt outstanding under our term loan facility that matures in October 2014 was 100.1% of the face value of the debt obligation, and the fair value of debt outstanding under our term loan that matures in October 2016 was 100.3% of the face value of the debt obligation, based on broker trading prices. Our Asia term loans are not traded publicly; however, as the pricing, maturity and other pertinent terms of these loans closely approximate those of the term loan facilities described above, we estimate the respective fair values would be approximately the same as the carrying values of the respective term loan facilities.

FOREIGN CURRENCY EXCHANGE RISK

        We transact business in various foreign countries and are, therefore, subject to risk of foreign currency exchange rate fluctuations. We have established a foreign currency risk management policy to manage this risk. To the extent possible, we manage our foreign currency exposure by evaluating and using non-financial techniques, such as currency of invoice, leading and lagging payments and receivables management. In addition, we borrow in various foreign currencies and enter into short-term foreign currency forward and swap contracts to hedge only those currency exposures associated with certain assets and liabilities, mainly accounts receivable and accounts payable, and cash flows denominated in non-functional currencies.

        We endeavor to maintain a partial or fully hedged position for certain transaction exposures. These exposures are primarily, but not limited to, revenues, customer and vendor payments and inter-company balances in currencies other than the functional currency unit of the operating entity. The credit risk of our foreign currency forward and swap contracts is minimized since all contracts are with large financial institutions and accordingly, fair value adjustments related to the credit risk of the counter-party financial institution were not material. The gains and losses on forward and swap contracts generally offset the losses and gains on the assets, liabilities and transactions hedged. The fair value of currency forward and swap contracts is reported on the balance sheet. The aggregate notional amount of outstanding contracts as of March 31, 2013 amounted to $4.8 billion and the recorded fair values of the associated asset and/or liability were not material. The majority of these foreign exchange contracts expire in less than three months and all expire within one year. They will settle primarily in Brazilian real, British pound, Canadian dollar, China renminbi, Danish kroner, Euro, Hungarian forint, Israeli shekel, Japanese yen, Malaysian ringgit, Mexican peso, Singapore dollar, and U.S. dollar.

        Based on our overall currency rate exposures as of March 31, 2013, including the derivative financial instruments intended to hedge the nonfunctional currency-denominated monetary assets, liabilities and cash flows, a near-term 10% appreciation or depreciation of the U.S. dollar from its cross-functional rates would not be expected to have a material effect on our financial position, results of operations and cash flows over the next fiscal year.

53

Table of Contents

ITEM 8.    FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of
Flextronics International Ltd.
Singapore

        We have audited the accompanying consolidated balance sheets of Flextronics International Ltd. and subsidiaries (the "Company") as of March 31, 2013 and 2012, and the related consolidated statements of operations, comprehensive income, shareholders' equity, and cash flows for each of the three years in the period ended March 31, 2013. These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audits.

        We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

        In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of Flextronics International Ltd. and subsidiaries as of March 31, 2013 and 2012, and the results of their operations and their cash flows for each of the three years in the period ended March 31, 2013, in conformity with accounting principles generally accepted in the United States of America.

        We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company's internal control over financial reporting as of March 31, 2013, based on the criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated May 28, 2013 expressed an unqualified opinion on the Company's internal control over financial reporting.

/s/ DELOITTE & TOUCHE LLP

San Jose, California
May 28, 2013

54

Table of Contents

FLEXTRONICS INTERNATIONAL LTD.

CONSOLIDATED BALANCE SHEETS