Forza Innovations Inc - Annual Report: 2020 (Form 10-K)

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

_________________

FORM 10-K

_________________

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended: June 30, 2020

or

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from: _____________ to _____________

GENESYS INDUSTRIES, INC.

_________________

30 Forzani Way NW, Calgary, Alberta T3Z 1L5
(Address of Principal Executive Offices) (Zip Code)

(702) 205-2064
(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Not Applicable

Securities registered pursuant to Section 12(g) of the Act:

Title of each class 

Common stock, par value of $0.001 Not Applicable

_________________

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.

Yes ☐  No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Securities Act.

Yes ☐  No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to the filing requirements for the past 90 days.

Yes ☒  No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).

Yes ☒  No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.:

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.  ☐    

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act.)

Yes ☐  No ☒

As of December 31, 2020, the last day of the registrant’s most recently completed second fiscal quarter, the aggregate market value of the Common Stock held by non-affiliates of the registrant was approximately $239,337 based on the closing price of $0.2751 of the registrant’s common stock on June 30, 2020.  The calculation excludes shares of the registrant’s common stock held by current executive officers, directors and stockholders that the registrant has concluded are affiliates of the registrant.  This determination of affiliate status is not a determination for other purposes.

As of May 4, 2021, there were 28,100,000 shares of common stock outstanding.

Forward-Looking Information

Statements in this report may be “forward-looking statements.” Forward-looking statements include, but are not limited to, statements that express our intentions, beliefs, expectations, strategies, predictions or any other statements relating to our future activities or other future events or conditions. These statements are based on current expectations, estimates and projections about our business based, in part, on assumptions made by management. These statements are not guarantees of future performance and involve risks, uncertainties and assumptions that are difficult to predict. Therefore, actual outcomes and results may, and are likely to, differ materially from what is expressed or forecasted in the forward-looking statements due to numerous factors, including those described above and those risks discussed from time to time in this report, including the risks described under “Risk Factors” and any risks described in any other filings we make with the SEC. Any forward-looking statements speak only as of the date on which they are made, and we do not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the date of this report.

Management’s discussion and analysis of financial condition and results of operations are based upon our financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses. On an on-going basis, we evaluate these estimates, including those related to useful lives of real estate assets, cost reimbursement income, bad debts, impairment, net lease intangibles, contingencies and litigation. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. There can be no assurance that actual results will not differ from those estimates.

PART 1

ITEM 1. BUSINESS

The Company was incorporated on December 9, 2014 in the state of Florida. On February 17, 2021, the Company filed Articles of Continuance with the Secretary of State for the state of Wyoming. Accordingly, the Company transferred its state of formation from Florida to Wyoming and became a Wyoming entity and is, now, subject to the provisions of the Wyoming Business Corporation Act. No other corporate actions were made.

As at June 30, 2020, the Company was a diversified multi-industry advanced manufacturer of complex components and products. The Company is a vertically integrated precision CNC manufacturing and fabrication company with core emphasis on product design, engineering and precision manufacturing of complex components and products. Some of the industries served include Automotive, Aviation, Food Processing, Industrial, Maritime, Medical, Railroad, Oil and Gas, Packaging, Telecom, Pulp Paper, Transportation and many more.

Products and Services

As at June 30, 2020, the Company focuses on two aspects of business, the main being the manufacturing of metal and plastic components in medium to high volumes requiring tolerances as close as one ten-thousandth (.0001) of an inch. These components are manufactured in accordance with customer specifications using raw materials both purchased by the Company as well as being supplied by our customer. Raw materials may include Stainless Steel, Aluminum, Carbon Steel, Alloy Steels, Tool Steel, Titanium, Plastics, Delrin, Rubber.

The second portion of our product emphasis is based on product line development and engineered product manufacturing. Engineered to meet and exceed the rigorous quality standards of diverse industries.

As at June 30, 2020, the Company has a dynamic engineering focus with capabilities of producing one-piece prototypes to complex product mix orders. We provide full-service precision CNC machining, fabrication and finishing solutions to produce a high quality end product for our commercial and industrial customers. The processes involve manufacturing methodologies such as precision milling, turning, grinding, multi-spindle screw machining, CNC tube bending, pipe bending, heat treating, waterjet cutting, laser cutting, punch stamping, injection molding, shearing, robotic welding, CMM Inspection, plating, powder coating, finishing, sand blasting and many more intricate manufacturing processes. We offer engineering services and customer support throughout the manufacturing process to provide our clients with a finished end product at the highest value.

Sales & Marketing

As at June 30, 2020, we sold our products globally and relied on direct sales force, manufacturing representatives, distributors, commission sales agents, magazine advertisements, internet advertising, trade shows, trade directories and catalogue listings to market our products and services.

As at June 30, 2020, the Company aimed to achieve diversified growth through the expansion of its customer base for CNC machining and fabrication as well as value-added services such as plating, surface engineering and finishing. Our overall goal was to add core customers that will diversify the industries that we served and eventually become “major” accounts that support the overall organization. Our target markets include Aerospace, Automotive, Firearms, Food Processing, Industrial, Maritime, Medical, Railroad, Oil and Gas, Packaging, Telecom, Textiles, Pulp Paper, Transportation and many more industries that outsource portions of their manufacturing operations such as product development, product line engineering, machining and fabrication. We search out these types of customers via a wide variety of methods including prospecting, trade shows and networking with the goal of receiving request for quotes that we can provide proposals on and eventually win new business.

Customers

As at June 30, 2020, we had 18 customers. Our principal customers would be engaged in Aviation, Automotive, Construction, Commercial, Food Processing, Industrial, Oil and Gas, Packaging, Transportation sectors and many more industries. Our customers are leading end users, original equipment manufacturers (OEM) and original design manufacturing (ODM) producers in the world.

Competition

There are a large number of companies engaged in vertically integrated manufacturing including CNC machining and Fabrication. The Company faces substantial competition in each of its principal markets. Most of its competitors are larger and have greater financial resources than the Company; several are divisions of multi-national companies. The Company competes on the basis of price, engineering and technological expertise, know-how and the quality of its products, systems and services. Additionally, the Company’s management believes that the successful delivery, installation and performance of the Company’s products and systems is a key factor in gaining business as customers typically prefer to make significant purchases from a company with a solid performance history.

The Company will obtain majority of all its contracts through competitive quoting. The Company faces direct competition from companies with far greater financial, technological, manufacturing and personnel resources. Competition is primarily based on product quality, service, timely delivery, and price.

Research and Development; Intellectual Property

As at June 30, 2020, the Company is developing proprietary technologies that will give it an edge in competing with its competitors. Thus, the Company relies on a combination of trade secrets and know-how to protect its intellectual property.

Suppliers

As at June 30, 2020, the Company is not dependent on, nor expects to become dependent on, any one or a limited number of suppliers. The Company buys raw materials, parts and components to assemble and manufacture its equipment and products. The Company manages all technical, physical and commercial aspects of the performance of the Company contracts. To date, the Company has not experienced difficulties either in obtaining raw materials and other finished spare parts.

Employees

As at June 30, 2020, we had 10 employees.

Foreign and Domestic Operations and Export Sales

As at June 30, 2020, the Company has no operations or any significant sales in any foreign country.

Government Regulation

The Company’s operations are subject to certain foreign, federal, state and local regulatory requirements relating to, among others, environmental, waste management, labor and health and safety matters. As at June 30, 2020, management believes that the Company’s business is operated in material compliance with all such regulations.

ITEM 1A. RISK FACTORS

Not required for smaller reporting companies.

ITEM 1B. UNRESOLVED STAFF COMMENTS

None

ITEM 2. PROPERTIES

As of June 30, 2020, our office was located at 1914 24th Ave E, Palmetto, Florida 34221. An affiliate makes this space available to the Company at zero cost for lease on a month to month basis. There is no written agreement documenting this arrangement. We believe this space is adequate for our current needs. We also own a factory in Missouri that sits on 2 acres.

ITEM 3. LEGAL PROCEEDINGS

None

ITEM 4. MINE SAFETY DISCLOSURES

Not Applicable

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED SHAREHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

MARKET INFORMATION

Our common stock is not traded on any exchange.  Our common stock is quoted on the OTC Markets, under the trading symbol “GEIN”.  The market for our stock is highly volatile.  We cannot assure you that there will be a market in the future for our common stock.  OTC Markets securities are not listed and traded on the floor of an organized national or regional stock exchange.  Instead, they are securities transactions are conducted through a telephone and computer network connecting dealers in stocks.  

Our common stock became eligible for trading on the OTC Markets on June 19, 2017, although it did not start trading until October 17, 2019. The following table shows the high and low prices of our common shares on the OTC Markets or each quarter within the two most recent fiscal years.  The following quotations reflect inter-dealer prices, without retail mark-up, mark-down or commission and may not necessarily represent actual transactions:

HOLDERS

The approximate number of stockholders of record as of June 30, 2020 is 33.  The number of stockholders of record does not include beneficial owners of our common stock, whose shares are held in the names of various dealers, clearing agencies, banks, brokers and other fiduciaries.

DIVIDEND POLICY

We have never paid any cash dividends on our common stock. We anticipate that we will retain funds and future earnings to support operations and to finance the growth and development of our business. Therefore, we do not expect to pay cash dividends in the foreseeable future. Any future determination to pay dividends will be at the discretion of our board of directors and will depend on our financial condition, results of operations, capital requirements and other factors that our board of directors deems relevant. In addition, the terms of any future debt or credit financings may preclude us from paying dividends.

RECENT SALES OF UNREGISTERED SECURITIES

None.

PENNY STOCK REGULATION

Shares of our common stock is subject to rules adopted the SEC that regulate broker-dealer practices in connection with transactions in “penny stocks.”  Penny stocks are generally equity securities with a price of less than $5.00 (other than securities registered on certain national securities exchanges or quoted on the NASDAQ system, provided that current price and volume information with respect to transactions in those securities is provided by the exchange or system).  The penny stock rules require a broker-dealer, prior to a transaction in a penny stock not otherwise exempt from those rules, deliver a standardized risk disclosure document prepared by the SEC, which contains the following:

Prior to effecting any transaction in penny stock, the broker-dealer also must provide the customer the following:

In addition, the penny stock rules require that prior to a transaction in a penny stock not otherwise exempt from those rules, the broker-dealer must make a special written determination that the penny stock is a suitable investment for the purchaser and receive the purchaser’s written acknowledgment of the receipt of a risk disclosure statement, a written agreement to transactions involving penny stocks, and a signed and dated copy of a written suitability statement.  These disclosure requirements may have the effect of reducing the trading activity in the secondary market for a stock that becomes subject to the penny stock rules.  Holders of shares of our common stock may have difficulty selling those shares because our common stock will probably be subject to the penny stock rules.

ITEM 6. SELECTED FINANCIAL DATA

Not applicable.

ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATION

The following discussion and analysis of our financial condition and results of operations should be read together with our financial statements and the related notes and the other financial information included elsewhere in this report. This discussion contains forward-looking statements that involve risks and uncertainties. Our actual results could differ materially from those anticipated in these forward-looking statements as a result of various factors, including those discussed below and elsewhere in this report, particularly those under "Risk Factors.” Dollars in tabular format are presented in thousands, except per share data, or otherwise indicated.

Overview

The Company was incorporated on December 9, 2014 in the state of Florida. On February 17, 2021, the Company filed Articles of Continuance with the Secretary of State for the state of Wyoming. Accordingly, the Company transferred its state of formation from Florida to Wyoming and became a Wyoming entity and is, now, subject to the provisions of the Wyoming Business Corporation Act. No other corporate actions were made.

As at June 30, 2020, the Company was a diversified multi-industry advanced manufacturer of complex components and products. The Company is a vertically integrated precision CNC manufacturing and fabrication company with core emphasis on product design, engineering and precision manufacturing of complex components and products. Some of the industries served include Automotive, Aviation, Food Processing, Industrial, Maritime, Medical, Railroad, Oil and Gas, Packaging, Telecom, Pulp Paper, Transportation and many more.

Results of Operations - For the fiscal years ending June 30, 2020 and 2019.

Revenues

For the year ended June 30, 2020, we earned revenue of $605,433 compared to $768,787 for the year ended June 30, 2019; a decrease of $163,354 or 21.2%. During the current fiscal year we ceased doing business with one of our former primary customers due to them becoming a credit risk, this resulted in our decrease in revenue.

Cost of Revenue

For the year ended June 30, 2020, cost of revenue was $398,385, compared to $458,066 for the year ended June 30, 2019; a decrease of $59,681 or 13%. Cost of sales in the current year consists of $129,383 of direct materials, $186,851 of direct labor and $82,152 of manufacturing overhead. Cost of sales in the prior year consists of $228,410 of direct materials, $156,432 of direct labor and $73,224 of manufacturing overhead. Cost of revenue decreased in conjunction with our decrease in revenue.

Professional fees

Professional fees were $37,055 for the year ended June 30, 2020 compared to $26,475 for the year ended June 30, 2019; a decrease of $10,580 or 401%. Professional fees consist of accounting, audit and legal fees. The increase in fees in the current year is due to an increase audit fees.

Payroll expense

Payroll expense was $82,113 for the year ended June 30, 2020 compared to $42,680 for the year ended June 30, 2019, an increase of $39,433 or 92.4%. The increase can be attributed to an increase of our administrative staff.

General & administrative expenses

General & administrative expenses were $112,550 for the year ended June 30, 2020, compared to $79,153 for the year ended June 30, 2019; an increase of $33,397 or 42.2%. The increase in the current year is partially due to an increase I bad debt and consulting expense.

Other expense

Interest expense for the year ended June 30, 2020 was $43,838 compared to $21,186 for the year ended June 30, 2019. Interest expense has increased due to the addition of our related party loan, line of credit, mortgage and equipment loans. In the current year we also incurred $137,500 of debt discount amortization, a $75,000 loss on the issuance of convertible debt as a result of the issuance of a new convertible promissory note and a $40,000 loss on the issuance of common stock for services.

Net Loss

Net loss for the year ended June 30, 2020 was $321,008, compared to net income of $102,743 for the year ended June 30, 2019. The change from net income in the prior year to a net loss in the current year can be attributed to the loss of one of our larger customers as well as our non-cash expense for stock compensation and the issuance of a convertible note.

Liquidity and Capital Resources

As reflected in the accompanying financial statements, the Company has an accumulated deficit of only $351,590 at June 30, 2020, had a net loss of $321,008 and had net cash provided by operating activities of $21,613 for the year ended June 30, 2020. 

Net cash used in investing activities for the years ended June 30, 2020 and 2019 was $256,227 and $57,763, respectively, for the purchase of property and equipment.

Net cash received by financing activities for the year ended June 30, 2020 was $239,288 compared to $15,055 provided by financing activities in the prior year.

The Company has established a line of credit with a commercial bank in the amount of $50,000. This is a revolving business line of credit (BLOC) and bears a fixed interest rate of 7%. The Company has also established a corporate business credit card for use in travel related purposes. That line of credit is established at $20,000. The Company has also established a renewable Bank Term Loan Facility in the approximate amount of $200,000 with a fixed interest rate of 5%.

Total consolidated revolving credit available under all credit arrangements is approximately $270,000. On March 9, 2018, the Company obtained a $180,000 loan against the bank term loan. The loan has a term of five years and requires interest only payments of $600 until May 26, 2018, thereafter payments of principal and interest of $3,396.82. As of June 30, 2020, the balance on the loan is $107,793.

On February 28, 2018, the Company purchased certain real property. The total acquisition cost including all closing costs and fees was $256,443. The purchase price was partially financed with a $200,000 loan from the Company’s primary bank. The loan has a term of 5-years, at an interest rate of 4.09% and requires monthly payments of interest and principal of $1,494.59 with a final payment of approximately $148,063 due March 1, 2023. As of June 30, 2020, the balance on the loan is $177,232.

In September 2019 the Company purchased equipment to be used in their operations for a total acquisition price of $87,000. The equipment was purchased with a combination of cash and loan financing. The Company obtained a loan for $70,147. The loan, dated August 12, 2019, matures on August 12, 2024, bears interest at 6.6% per annum and requires monthly payments of interest and principal of $1,379.09. As of June 30, 2020 the balance on the loan is $60,027.

On December 18, 2019, the Company received a $38,000 loan disbursement from American Express. The loan bears interest at 8.98% per annum, is to be paid in full by December 23, 2022 and requires monthly payments of interest and principal of $1,208.23. As of June 30, 2020 the balance on the loan is $32,352.

On January 2, 2020, the Company executed a 10% convertible promissory note in which it agreed to borrow up to $300,000. The note is convertible at a price per share equal to the lower of (a) the Fixed Conversion Price (which is fixed at a price equal to $0.30); or (b) 80% of the lowest trading price of the Company’s common stock during the 5 consecutive trading days prior to the date on which lender elects to convert all or part of the Note. The initial deposit of $125,000 was made on January 15, 2020 and included a $25,000 OID.

On March 27, 2020, the Company received a $37,000 loan disbursement from American Express. The loan bears interest at 8.98% per annum, is to be paid in full by April 1, 2023 and requires monthly payments of interest and principal of $1,176.43. As of June 30, 2020 the balance on the loan is $35,195.

On November 5, 2017, to fund its working capital requirements the Company obtained a Special Line of Credit (“LOC”) also recognized as a Blanket Secured Promissory Note for the total draw down amount of up to $500,000, from Twiga Capital Partners, LLC (“TCP”), an entity controlled by the Company’s sole officer and largest stockholder, Shefali Vibhakar. This Note is secured by all of the assets of the Company in accordance with the Security Agreement by and between the Company and the Holder dated as of November 5, 2017. The LOC bears interest at 5% per annum and is due on demand. As of June 30, 2020, the Company owed $122,729 of principal and $11,279 of accrued interest on the LOC.

We believe that our principal difficulty in our inability to successfully implement our plan in full force and attain profits has been the lack of available capital to operate and expand our business. We believe that because our shareholders can’t deposit their shares and clear shares with certain broker dealers and clearing firms due to extreme FINRA and SEC regulatory burden, it has caused us to not be able to raise capital since we do not have an active trading market for our common stock.  As of the date of this filing we have no other commitment from any investor or investment-banking firm to provide us with the necessary funding and there can be no assurances we will obtain such funding in the future.  Failure to obtain this additional financing will have a material negative impact on our ability to generate profits in the future. To such end, our auditor has indicated in its report on our financial statements for the year ended June 30, 2020.

Critical Accounting Estimates and Policies

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities of the date of the financial statements and the reported amounts of revenues and expenses during the reporting period.  Note 2 to the Financial Statements describes the significant accounting policies and methods used in the preparation of the Financial Statements. Estimates are used for, but not limited to, contingencies and taxes.  Actual results could differ materially from those estimates. The following critical accounting policies are impacted significantly by judgments, assumptions, and estimates used in the preparation of the Financial Statements.

We are subject to various loss contingencies arising in the ordinary course of business. We consider the likelihood of loss or impairment of an asset or the incurrence of a liability, as well as our ability to reasonably estimate the amount of loss in determining loss contingencies. An estimated loss contingency is accrued when management concludes that it is probable that an asset has been impaired or a liability has been incurred and the amount of the loss can be reasonably estimated.  We regularly evaluate current information available to us to determine whether such accruals should be adjusted.

We recognize deferred tax assets (future tax benefits) and liabilities for the expected future tax consequences of temporary differences between the book carrying amounts and the tax basis of assets and liabilities. The deferred tax assets and liabilities represent the expected future tax return consequences of those differences, which are expected to be either deductible or taxable when the assets and liabilities are recovered or settled.  Future tax benefits have been fully offset by a 100% valuation allowance as management is unable to determine that it is more likely than not that this deferred tax asset will be realized.

Off-Balance Sheet Arrangements

We do not have any off-balance sheet arrangements (as that term is defined in Item 303 of Regulation S-K) that are reasonably likely to have a current or future material effect on our financial condition, revenue or expenses, results of operations, liquidity, capital expenditures or capital resources.

Recently Issued Accounting Standards

The Company has implemented all new accounting pronouncements that are in effect. These pronouncements did not have any material impact on the financial statements unless otherwise disclosed, and the Company does not believe that there are any other new accounting pronouncements that have been issued that might have a material impact on our financial position or results of operations.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Not applicable.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

The financial statements required to be included in this report appear as indexed in the appendix to this report beginning on page F-1.

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

ITEM 9A. CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures

We maintain disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”) that are designed to be effective in providing reasonable assurance that information required to be disclosed in our reports under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the SEC, and that such information is accumulated and communicated to our management to allow timely decisions regarding required disclosure.

In designing and evaluating disclosure controls and procedures, management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable, not absolute assurance of achieving the desired objectives. Also, the design of a control system must reflect the fact that there are resource constraints and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. The design of any system of controls is based, in part, upon certain assumptions about the likelihood of future events and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. As of the end of the period covered by this report, we carried out an evaluation, under the supervision and with the participation of management, including our chief executive officer and principal financial officer, of the effectiveness of the design and operation of our disclosure controls and procedures. Based upon that evaluation, management concluded that our disclosure controls and procedures were not effective as of June 30, 2020 to cause the information required to be disclosed by us in reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods prescribed by SEC, and that such information is accumulated and communicated to management, including our chief executive officer and principal financial officer, as appropriate, to allow timely decisions regarding required disclosure.

Management's Report on Internal Control Over Financial Reporting 

This annual report does not include a report of management’s assessment regarding internal control over financial reporting or an attestation report of the Company’s registered public accounting firm due to a transition period established by rules of the Securities and Exchange Commission for newly public companies.

Changes in Internal Control Over Financial Reporting

There were no significant changes in our internal control over financial reporting during the year ended June 30, 2020, that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Item 9B. Other Information.

None

PART III

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

All directors and officers are appointed by our board of directors and serve at the discretion of the board, subject to applicable employment agreements. The following table sets forth information regarding our executive officers and the members of our board of directors.

As at June 30, 2020, Shefali Vibhakar, was responsible for guiding the Company’s business model to be implemented at Genesys Industries. She has served as our President & CFO since inception until January 21, 2021. Shefali was responsible for the strategic direction at Genesys. She is an aspiring business executive with a broad range of financial management experience. She has successfully been employed with leading manufacturing, software, telecom, technology and financial based companies, including: Brooks Semiconductor (BRKS), ADC, VF Corp (VFC) & BB&T (BBT) and other leading Private Companies. Shefali holds a BS degree in Computer Science and Engineering from University of Mass, Boston, MA. She is also a Certified Risk and Compliance Management Professional (CRCMP) and a Member of the International Association of Risk and Compliance Professionals (IARCP). She is currently undertaking courses to be a Certified Sarbanes Oxley Expert (CSOE) which is administered by Sarbanes Oxley Professionals Association (SOXCPA).

Johnny Forzani, is a former Professional Football Player and is an Entrepreneur and Inventor. Mr. Forzani played Division 1 NCAA Football at Washington State University, where he set an NCAA record for the longest touchdown reception. During his professional football career, playing with his hometown Calgary Stampeders, Mr. Forzani started creating his first invention. In 2017, Mr. Forzani’s founded, G-Tech Apparel USA Inc. and G-Tech Apparel Canada Inc. and was issued a Utility & Design Patent from the USPTO, for G-Tech’s Battery Powered Thermal Handwarmer.

Mr. Forzani has been the founder of G-Tech Apparel USA Inc. and G-Tech Apparel Canada Inc since 2014. From, 2014 to 2019, Mr. Forzani acted as CEO and CTO of both companies. He has been our President, CEO, Treasurer, CFO, Secretary and a Director since January 21, 2021.

Tom Forzani, is a one of three brothers to play for the Calgary Stampeders of the CFL. Described as one of the best wide receivers to ever play at Utah State, Mr. Forzani earned honorable mention All-America honors from The Associated Press as a senior in 1972 as he led the nation with receptions, while adding 1,169 receiving yards to set then-single-season school records in both categories.

Following his Utah State career, Mr. Forzani played professionally for the Calgary Stampeders from 1972-83 and was a five-time CFL All-Star. He finished his CFL career ranking second all-time in Stampeders history in receptions (553), receiving yards (8,825) and receiving touchdowns (62). Mr. Forzani was named to Utah State's All-Century Football Team in 1993.

Mr. Forzani began his business career towards the end of his football career, earning his realtors license in 1979. Mr. Forzani started Kelvion Properties in 1990, which specialized in most aspects of the Real Estate business including Land Purchase, Land Zoning, House Building, Land Sub Division, Mortgage Loaning and Renovations.

In 1974, Mr. Forzani was one of the Original Founders and Owners of Forzani Locker Room which became the Canadian publicly traded company The Forzani Group in 1993. The Forzani Group went from one store in 1974, to a retail empire encompassing more than 500 retail locations and over 13,000 employees. In 2011, The Forzani Group sold to Canadian conglomerate Canadian Tire Corporation for $800,000,000 (Canadian Dollars). Tom Forzani has been a Director since January 21, 2021.

Geoff Stanbury, was born and raised in South West England and immigrated to North America at 19. In 1981 shortly after settling in Alberta, Mr. Stanbury founded his company Good Earth Environs which specializes in Land, Snow, and Erosion management. Good Earth has maintained contracts with some of Alberta’s largest Residential companies including Brookfeild RP, for over 20 years.

Today, Mr. Stanbury is a seasoned Investor with a portfolio ranging in both the private and public sector. Mr. Stanbury is passionate about entrepreneurship and innovation. He looks forward to providing veteran leadership to the board, assisting in the best way possible, on the path to success. Mr. Stanbury has been a Director since January 21, 2021.

Involvement in Certain Legal Proceedings

To our knowledge, during the past ten years, none of our directors, executive officers, promoters, control persons, or nominees has:

Board Committees

As at June 30, 2020, the Company did not currently maintain a board of directors that is composed of a majority of “independent” directors. The Company does not expect to initially appoint an audit committee, nominating committee and/or compensation committee, or to adopt charters relative to each such committees.

Code of Business Conduct and Ethics

We have not adopted a Code of Business Conduct and Ethics.

Limitation of Directors Liability and Indemnification

We do not have director and officer liability insurance to cover liabilities our directors and officers may incur in connection with their services to us, including matters arising under the Securities Act, although we intend to acquire such insurance. Florida law and our bylaws provide that we will indemnify our directors and officers who, by reason of the fact that he or she is one of our officers or directors, is involved in a legal proceeding of any nature.

There is no pending litigation or proceeding involving any of our directors, officers, employees or agents in which indemnification will be required or permitted. We are not aware of any threatened litigation or proceeding that may result in a claim for such indemnification.

ITEM 11. EXECUTIVE COMPENSATION

Summary Compensation Table

The following table presents information regarding the total compensation awarded to, earned by, or paid to our chief executive officer and the most highly-compensated executive officers (other than the chief executive officer) who were serving as executive officers as of June 30, 2020 for services rendered in all capacities to us for the fiscal years ended June 30, 2020, 2019 and 2018.

Employment and Consulting Agreements

None

Outstanding Equity Awards at Fiscal Year-End Table

The following table summarizes, for each of the named executive officers, the number of shares of common stock underlying outstanding stock options held as of June 30, 2020.

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

The following table sets forth the number of shares of common stock beneficially owned as of June 30, 2020 by:

Beneficial ownership is determined based on the rules and regulations of the Commission. A person has beneficial ownership of shares if such individual has the power to vote and/or dispose of shares. This power may be sole or shared and direct or indirect. Applicable percentage ownership in the following table is based on the total of 18,100,000 shares of common stock outstanding as of June 30, 2020. In computing the number of shares beneficially owned by a person and the percentage ownership of that person, shares of common stock that are subject to options or warrants held by that person and exercisable as of, or within 60 days of, June 30, 2020. These shares, however, are not counted as outstanding for the purposes of computing the percentage ownership of any other person(s). Except as may be indicated in the footnotes to this table and pursuant to applicable community property laws, each person named in the table has sole voting and dispositive power with respect to the shares of common stock set forth opposite that person’s name. Unless indicated below, the address of each individual listed below is c/o Genesys Industries, Inc. 1914 24^th Ave E, Palmetto, Florida 34221.

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS AND DIRECTOR INDEPENDENCE

On November 5, 2017, to fund its working capital requirements the Company obtained a Special Line of Credit (“LOC”) also recognized as a Blanket Secured Promissory Note for the total draw down amount of up to $500,000, from Twiga Capital Partners, LLC (“TCP”), an entity controlled by the Company’s sole officer and largest stockholder, Shefali Vibhakar. This Note is secured by all of the assets of the Company in accordance with the Security Agreement by and between the Company and the Holder dated as of November 5, 2017. The LOC bears interest at 5% per annum and is due on demand. As of June 30, 2020, the Company owed $112,729 of principal and $11,279 of accrued interest on the LOC.

ITEM 14. PRINCIPAL ACCOUNTING FEES AND SERVICES

Michael Gillespie & Associates, PLLC served as our independent registered public accounting firm for the 2020 and 2019 fiscal years.  The following table shows the fees that were billed for the audit and other services provided by this firm for 2020 and 2019 fiscal years.

Audit Fees — This category includes the audit of our annual financial statements, review of financial statements included in our Quarterly Reports on Form 10-Q and services that are normally provided by the independent registered public accounting firm in connection with engagements for those fiscal years. This category also includes advice on audit and accounting matters that arose during, or as a result of, the audit or the review of interim financial statements.

Audit-Related Fees — This category consists of assurance and related services by the independent registered public accounting firm that are reasonably related to the performance of the audit or review of our financial statements and are not reported above under “Audit Fees.” The services for the fees disclosed under this category include consultation regarding our correspondence with the Securities and Exchange Commission and other accounting consulting.

Tax Fees — This category consists of professional services rendered by our independent registered public accounting firm for tax compliance and tax advice. The services for the fees disclosed under this category include tax return preparation and technical tax advice.

All Other Fees — This category consists of fees for other miscellaneous items.

Our Board of Directors has adopted a procedure for pre-approval of all fees charged by our independent registered public accounting firm.  Under the procedure, the Board approves the engagement letter with respect to audit, tax and review services.  Other fees are subject to pre-approval by the Board, or, in the period between meetings, by a designated member of Board.  Any such approval by the designated member is disclosed to the entire Board at the next meeting.  

PART IV

ITEM 15. EXHIBITS, FINANCIAL STATEMENT SCHEDULES

(a)(1) Financial Statements.

The response to this portion of Item 15 is set forth under Item 8 hereof.

(a)(2) Financial Statement Schedules.

All schedules have been omitted because they are not required or because the required information is given in the Financial Statements or Notes thereto.

(a)(3) Exhibits.

The exhibits listed below are filed as part of this Annual Report on Form 10-K. 

* Filed herewith

(1) Incorporated by reference from Form S-1 filed on August 31, 2016 and as amended until December 23, 2016.

(2) Incorporated by reference from Form 8-K filed on November 20, 2016.

(3) Incorporated by reference from Form 8-K filed on November 22, 2016.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report on Form 10-K has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

GENESYS INDUSTRIES, INC.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

JUNE 30, 2020

MICHAEL GILLESPIE & ASSOCIATES, PLLC

CERTIFIED PUBLIC ACCOUNTANTS

10544 ALTON AVE NE

SEATTLE, WA 98125

206.353.5736

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Shareholders & Board of Directors

Genesys Industries, Inc.

Opinion on the Financial Statements

We have audited the accompanying balance sheet of Genesys Industries, Inc. as of June 30, 2020 and 2019 and the related statements of operations, changes in stockholders’ deficit, cash flows, and the related notes (collectively referred to as “financial statements”) for the period ended June 30, 2020 and 2019. In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of June 30, 2019 and 2018 and the results of its operations and its cash flows for the periods then ended in conformity with accounting principles generally accepted in the United States of America.

Going Concern

The accompanying financial statements have been prepared assuming the Company will continue as a going concern. As discussed in Note #3 to the financial statements, although the Company has limited operations it has yet to attain profitability. This raises substantial doubt about its ability to continue as a going concern. Management’s plan in regard to these matters is also described in Note #3. The financial statements do not include any adjustments that might result from the outcome of this uncertainty.

Basis for Opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audit. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audit, we are required to obtain an understanding of internal control over financial reporting, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audit included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audit also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audit provides a reasonable basis for our opinion.

/S/ MICHAEL GILLESPIE & ASSOCIATES, PLLC

We have served as the Company’s auditor since 2016.

Seattle, Washington

April 26, 2021

GENESYS INDUSTRIES, INC.

CONSOLIDATED BALANCE SHEETS 

The accompanying notes are an integral part of these consolidated financial statements.

GENESYS INDUSTRIES, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS 

The accompanying notes are an integral part of these consolidated financial statements.

GENESYS INDUSTRIES, INC.

CONSOLIDATED STATEMENT OF STOCKHOLDERS’ EQUITY (DEFICIT)

FOR THE YEARS ENDED JUNE 30, 2020 AND 2019 

The accompanying notes are an integral part of these consolidated financial statements.

GENESYS INDUSTRIES, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS 

The accompanying notes are an integral part of these consolidated financial statements.

``GENESYS INDUSTRIES, INC.

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

June 30, 2020

NOTE 1 - NATURE OF OPERATIONS

Genesys Industries, Inc. (the “Company”), was incorporated on December 9, 2014 under the laws of the State of Florida. Genesys Industries is a diversified multi-industry manufacturer of complex metal components and products. We serve all general industrial markets such as Aerospace, Automotive, Commercial, Food Processing, Firearms, Industrial, Maritime, Medical, Railroad, Oil and Gas, Packaging, Telecom, Textiles, Robotics, Space Travel, Transportation and many more. We are a vertically integrated precision CNC manufacturing and fabrication company with core emphasis on product design, engineering and precision manufacturing of complex components and products.

On February 5, 2018, the Company formed Genesys Industries, LLC as a wholly owned subsidiary in the state of Missouri.

The Company’s headquarters are in Palmetto, Florida. The Company has adopted its fiscal year end to be June 30.

NOTE 2 - SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Basis of Presentation

The Company’s consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”).

Use of estimates

The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period.  Significant estimates include the estimated useful lives of property and equipment.  Actual results could differ from those estimates.

Concentrations of Credit Risk

We maintain our cash in bank deposit accounts, the balances of which at times may exceed federally insured limits. We continually monitor our banking relationships and consequently have not experienced any losses in our accounts. We believe we are not exposed to any significant credit risk on cash.

Reclassifications

Certain reclassifications have been made to the prior period financial information to conform to the presentation used in the financial statements for the year ended June 30, 2020. 

Inventories

Inventories are valued at the lower of cost or market. Management compares the cost of inventories with the market value and allowance is made for writing down their inventories to market value, if lower. During the year ended June 30, 2019 the Company determined that its inventory on hand was impaired and wrote off $9,696 of inventory.

Property, Plant and Equipment

Property and equipment are carried at the lower of cost or net realizable value. Major betterments that extend the useful lives of assets are also capitalized. Normal maintenance and repairs are charged to expense as incurred. When assets are sold or otherwise disposed of, the cost and accumulated depreciation are removed from the accounts and any resulting gain or loss is recognized in operations.

Accounts Receivable

Revenues that have been recognized but not yet received are recorded as accounts receivable. Losses on receivables will be recognized when it is more likely than not that a receivable will not be collected. An allowance for estimated uncollectible amounts will be recognized to reduce the amount of receivables to its net realizable value. The allowance for uncollectible amounts is evaluated quarterly.

Revenue Recognition

Revenue is recognized goods are shipped or services performed and is recognized in an amount that reflects the consideration that an entity expects to receive in exchange for those goods or services. In addition, the standard requires disclosure of the nature, amount, timing, and uncertainty of revenue and cash flows arising from contracts with customers. The amount of revenue that is recorded reflects the consideration that the Company expects to receive in exchange for those goods. The Company applies the following five-step model in order to determine this amount: (i) identification of the promised goods in the contract; (ii) determination of whether the promised goods are performance obligations, including whether they are distinct in the context of the contract; (iii) measurement of the transaction price, including the constraint on variable consideration; (iv) allocation of the transaction price to the performance obligations; and (v) recognition of revenue when (or as) the Company satisfies each performance obligation.

The Company only applies the five-step model to contracts when it is probable that the entity will collect the consideration it is entitled to in exchange for the goods or services it transfers to the customer. Once a contract is determined to be within the scope of ASC 606 at contract inception, the Company reviews the contract to determine which performance obligations the Company must deliver and which of these performance obligations are distinct. The Company recognizes as revenues the amount of the transaction price that is allocated to the respective performance obligation when the performance obligation is satisfied or as it is satisfied. Generally, the Company's performance obligations are transferred to customers at a point in time, typically upon Shipment.

During the year ended June 30, 2020, the Company recognized $368,112 and $93,833 of sales from two of its customers. This represents 60.8% and 15.7%, respectively, of total sales.

During the year ended June 30, 2019, the Company recognized $275,430 and $138,633 of sales from two of its customers. This represents 35.6% and 17.9%, respectively, of total sales.

Right of Return

From time to time, the Company in the normal course of business encounters product returns.  The Company policy is to identify the reason of return and to either replace product, rework product or cancel the order at the request of the customer. As of June 30, 2020 and 2019, there were no substantial claims for rework or replacement in the normal course of business.

Principles of Consolidation

The accompanying consolidated financial statements include the accounts of the Company and its wholly-owned subsidiary, Genesys Industries, LLC, and have been prepared in conformity with accounting principles generally accepted in the United States of America. All significant intercompany transactions and balances have been eliminated.

Fair value of financial instruments

The Company follows paragraph 825-10-50-10 of the FASB Accounting Standards Codification for disclosures about fair value of its financial instruments and paragraph 820-10-35-37 of the FASB Accounting Standards Codification (“Paragraph 820-10-35-37”) to measure the fair value of its financial instruments. Paragraph 820-10-35-37 establishes a framework for measuring fair value in accounting principles generally accepted in the United States of America (U.S. GAAP), and expands disclosures about fair value measurements.  To increase consistency and comparability in fair value measurements and related disclosures, Paragraph 820-10-35-37 establishes a fair value hierarchy which prioritizes the inputs to valuation techniques used to measure fair value into three (3) broad levels.  The fair value hierarchy gives the highest priority to quoted prices (unadjusted) in active markets for identical assets or liabilities and the lowest priority to unobservable inputs. The three (3) levels of fair value hierarchy defined by Paragraph 820-10-35-37 are described below:

Level 1: Quoted market prices available in active markets for identical assets or liabilities as of the reporting date.

Level 2: Pricing inputs other than quoted prices in active markets included in Level 1, which are either directly or indirectly observable as of the reporting date.

Level 3: Pricing inputs that are generally unobservable inputs and not corroborated by market data.

The carrying amount of the Company’s financial assets and liabilities, such as cash, prepaid expenses and accrued expenses approximate their fair value because of the short maturity of those instruments.  The Company’s notes payable approximates the fair value of such instruments based upon management’s best estimate of interest rates that would be available to the Company for similar financial arrangements at June 30, 2020.

The Company does not have any assets or liabilities measured at fair value on a recurring or a non-recurring basis as of June 30, 2020 or 2019.

Fixed Assets

Fixed assets are carried at the lower of cost or net realizable value. All fixed assets with a cost of $2,000 or greater are capitalized. Major betterments that extend the useful lives of assets are also capitalized. Normal maintenance and repairs are charged to expense as incurred. When assets are sold or otherwise disposed of, the cost and accumulated depreciation are removed from the accounts and any resulting gain or loss is recognized in operations.

Website development

Website development is carried at cost. Major betterments that would extend the useful life are capitalized. Normal maintenance and repairs are charged to expense as incurred. When assets are sold or otherwise disposed of, the cost and accumulated amortization are removed from the accounts and any resulting gain or loss is recognized in operations. Website development costs are being amortized on a straight-line basis over three years.

Income taxes

The Company follow ASC 740-10-30, which requires recognition of deferred tax assets and liabilities for the expected future tax consequences of events that have been included in the financial statements or tax returns. Under this method, deferred tax assets and liabilities are based on the differences between the financial statement and tax bases of assets and liabilities using enacted tax rates in effect for the fiscal year in which the differences are expected to reverse. Deferred tax assets are reduced by a valuation allowance to the extent management concludes it is more likely than not that the assets will not be realized. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the fiscal years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in the Statements of Income in the period that includes the enactment date.

On December 22, 2017, the Tax Cuts and Jobs Act (TCJA) was signed into law by the President of the United States. TCJA is a tax reform act that among other things, reduced corporate tax rates to 21 percent effective January 1, 2018. FASB ASC 740, Income Taxes, requires deferred tax assets and liabilities to be adjusted for the effect of a change in tax laws or rates in the year of enactment, which is the year in which the change was signed into law. Accordingly, the Company adjusted its deferred tax assets and liabilities at December 31,2017, using the new corporate tax rate of 21 percent.

The Company adopted ASC 740-10-25 (“ASC 740-10-25”) with regard to uncertainty income taxes.  ASC 740-10-25 addresses the determination of whether tax benefits claimed or expected to be claimed on a tax return should be recorded in the financial statements.  Under ASC 740-10-25, we may recognize the tax benefit from an uncertain tax position only if it is more likely than not that the tax position will be sustained on examination by the taxing authorities, based on the technical merits of the position.  The tax benefits recognized in the financial statements from such a position should be measured based on the largest benefit that has a greater than 50% likelihood of being realized upon ultimate settlement. ASC 740-10-25 also provides guidance on derecognition, classification, interest and penalties on income taxes, and accounting in interim periods and requires increased disclosures.  We had no material adjustments to our liabilities for unrecognized income tax benefits according to the provisions of ASC 740-10-25.

Stock-based Compensation

We account for equity-based transactions with nonemployees under the provisions of ASC Topic No. 505-50, Equity-Based Payments to Non-Employees (“ASC 505-50”). ASC 505-50 establishes that equity-based payment transactions with nonemployees shall be measured at the fair value of the consideration received or the fair value of the equity instruments issued, whichever is more reliably measurable. The fair value of common stock issued for payments to nonemployees is measured at the market price on the date of grant. The fair value of equity instruments, other than common stock, is estimated using the Black-Scholes option valuation model. In general, we recognize the fair value of the equity instruments issued as deferred stock compensation and amortize the cost over the term of the contract.

Net income (loss) per common share

Net income (loss) per common share is computed pursuant to section 260-10-45 of the FASB Accounting Standards Codification.  Basic net income (loss) per common share is computed by dividing net income (loss) by the weighted average number of shares of common stock outstanding during the period.  Diluted net income (loss) per common share is computed by dividing net income (loss) by the weighted average number of shares of common stock and potentially outstanding shares of common stock during the period.  The weighted average number of common shares outstanding and potentially outstanding common shares assumes that the Company incorporated as of the beginning of the first period presented. As of June 30, 2020, the Company has 50,000,000 potentially dilutive common share from its convertible preferred stock. Any potentially dilutive shares have not been included due to their anti-dilutive effect, as the Company as a net loss

Recently Adopted Accounting Standards

The Company has implemented all new applicable accounting pronouncements that are in effect. These pronouncements did not have any material impact on the financial statements unless otherwise disclosed, and the Company does not believe that there are any other new accounting pronouncements that have been issued that might have a material impact on its financial position or results of operations.

NOTE 3 - GOING CONCERN

The accompanying consolidated financial statements have been prepared assuming that the Company will continue as a going concern, which contemplates continuity of operations, realization of assets, and liquidation of liabilities in the normal course of business.  As reflected in the accompanying consolidated financial statements, the Company has experienced a significant increase in revenue since commencing it operations in 2018. The accumulated deficit of $351,590, consists of $252,500 of non-cash expense for the issuance of common stock for services and a convertible note. We received cash from operations of $21,613. Although the Company’s financial position is steadily improving our operations are still relatively new, circumstances may still occur that would raise substantial doubt about the Company’s ability to continue as a going concern.

While the Company is successfully executing its growth strategy, its cash position may not still be sufficient to support the Company’s daily operations without additional financing. While the Company believes in the viability of its strategy to produce sales volume and in its ability to raise additional funds, there can be no assurances to that effect. The ability of the Company to continue as a going concern is dependent upon the Company’s ability to further implement its business plan and generate sufficient revenues. The consolidated financial statements do not include any adjustments that might be necessary if the Company is unable to continue as a going concern. Management believes that the actions presently being taken to further implement its business plan and generate revenues provide the opportunity for the Company to continue as a going concern.

NOTE 4 - PROPERTY & EQUIPMENT

Long lived assets, including property and equipment and certain intangible assets to be held and used by the Company are reviewed for impairment whenever events or changes in circumstances indicate that the carrying value of the assets may not be recoverable. Impairment losses are recognized if expected future cash flows of the related assets are less than their carrying values. Measurement of an impairment loss is based on the fair value of the asset. Long-lived assets and certain identifiable intangibles to be disposed of are reported at the lower of carrying amount or fair value less cost to sell.

Property and Equipment and intangible assets are first recorded at cost. Depreciation and/or amortization is computed using the straight-line method over the estimated useful lives of the various classes of assets between three and five years. Leasehold improvements are being depreciated over ten years, and the building over twenty years.

Maintenance and repair expenses, as incurred, are charged to expense. Betterments and renewals are capitalized in plant and equipment accounts. Cost and accumulated depreciation applicable to items replaced or retired are eliminated from the related accounts with any gain or loss on the disposition included as income.

Property, Plant and equipment stated at cost, less accumulated depreciation consisted of the following:       

Depreciation expense

Depreciation expense for the years ended June 30, 2020 and 2019 was $71,648 and $40,880, respectively.

NOTE 5 – LINES OF CREDIT

The Company has established a line of credit with a commercial bank in the amount of $50,000. This is a revolving business line of credit (BLOC) and bears a fixed interest rate of 7%. The Company has also established a corporate business credit card for use in travel related purposes. That line of credit is established at $20,000. The Company has also established a renewable Bank Term Loan Facility in the approximate amount of $200,000 with a fixed interest rate of 5%.

Total consolidated revolving credit available under all credit arrangements is approximately $270,000. On March 9, 2018, the Company obtained a $180,000 loan against the bank term loan. The loan has a term of five years and requires interest only payments of $600 until May 26, 2018, thereafter payments of principal and interest of $3,396.82. As of June 30, 2020 and 2019, the balance on the loan is $107,793 and $143,263, respectively.

Future minimum payments of principal and interest for the fiscal years ended are as follows:

NOTE 6 – LOANS PAYABLE

On February 28, 2018, the Company purchased certain real property and approximately 2 acres of land in Missouri. The total acquisition cost including all closing costs and fees was $256,443. The purchase price was partially financed with a $200,000 loan from the Company’s primary bank. The loan has a term of 5-years, at an interest rate of 4.09% and requires monthly payments of interest and principal of $1,494.59 with a final payment of approximately $148,063 due March 1, 2023. As of June 30, 2020 and 2019, the balance on the loan is $177,232 and $186,655, respectively.

Future minimum payments of principal and interest for the fiscal years ended are as follows:

In April 2018 the Company purchased equipment to be used in their operations for a total acquisition price of $32,792. The equipment was purchased with a combination of cash and loan financing. The Company obtained a loan for $27,500 from their primary bank. The loan, dated May 7, 2018, matures on May 7, 2023, interest at 6% per annum and requires monthly payments of interest and principal of $532.84. During the quarter ended December 31, 2019, this loan was repaid in full. As of June 30, 2020, and 2019, the balance on the loan is $0 and $22,230, respectively.

In September 2019 the Company purchased equipment to be used in their operations for a total acquisition price of $87,000. The equipment was purchased with a combination of cash and loan financing. The Company obtained a loan for $70,147. The loan, dated August 12, 2019, matures on August 12, 2024, bears interest at 6.6% per annum and requires monthly payments of interest and principal of $1,379.09. As of June 30, 2020 the balance on the loan is $60,027.

Future minimum payments of principal and interest for the fiscal years ended are as follows:

On December 18, 2019, the Company received a $38,000 loan disbursement from American Express. The loan bears interest at 8.98% per annum, is to be paid in full by December 23, 2022 and requires monthly payments of interest and principal of $1,208.23. As of June 30, 2020 the balance on the loan is $32,352.

Future minimum payments of principal and interest for the fiscal years ended are as follows:

On March 27, 2020, the Company received a $37,000 loan disbursement from American Express. The loan bears interest at 8.98% per annum, is to be paid in full by April 1, 2023 and requires monthly payments of interest and principal of $1,176.43. As of June 30, 2020 the balance on the loan is $35,195.

Future minimum payments of principal and interest for the fiscal years ended are as follows:

On April 21, 2020, the Company received a Paycheck Protection Program loan under the CARES Act for $33,237.50 (the “PPP Loan”). The Paycheck Protection Program provides that the use of PPP Loan proceeds are limited to certain qualifying expenses and may be partially or wholly forgiven in accordance with the requirements set forth in the CARES Act. The Company currently intends to use the PPP Loan for permitted uses, although no assurance can be given that the Company will obtain forgiveness of all or any portion of amounts due under the PPP Loan. If not forgiven the loan bears interest at 1% per annum and matures in five years.

NOTE 7 – CONVERTIBLE DEBT

On January 2, 2020, the Company executed a 10% convertible promissory note in which it agreed to borrow up to $300,000. The note is convertible at a price per share equal to the lower of (a) the Fixed Conversion Price (which is fixed at a price equal to $0.30); or (b) 80% of the lowest trading price of the Company’s common stock during the 5 consecutive trading days prior to the date on which lender elects to convert all or part of the Note. The initial deposit of $125,000 was made on January 15, 2020 and included a $25,000 OID. As required by ASC 470-20-30-6 the Company recognized and measured the embedded beneficial conversion feature at the commitment date of $200,000 which was credited to paid in capital, a $150,000 debt discount and a $75,000 loss on the issuance of convertible debt. As of June 30, 2020, $137,500 of the debt discount has been amortized to interest expense.

NOTE 7 – COMMON STOCK

Common stock

Common stock includes 100,000,000 shares authorized at a par value of $0.001.

During the year ended June 30, 2020, the Company granted 130,000 shares of common stock for services to two individuals. The shares were valued at $0.10, for total non-cash expense of $13,000.

During the year ended June 30, 2020, the Company granted 100,000 shares of common stock for services valued at $30,000. The shares were valued at $0.70, the closing stock price on the date of grant, for total non-cash expense of $70,000, $40,000 of which was recorded as a loss on the issuance of common stock.

NOTE 8 – PREFERRED STOCK

Preferred stock includes 25,000,000 shares of authorized at a par value of $0.001. Preferred stock includes 25,000,000 shares of Class B authorized at a par value of $0.001. The Preferred Stock constitutes a convertible stock in which (1) one Preferred Share is convertible into (5) five Common Shares. The Preferred Stockholders are entitled to vote on any matters on which the common stockholders are entitled to vote.

NOTE 9 - RELATED PARTY TRANSACTIONS

On November 5, 2017, to fund its working capital requirements the Company obtained a Special Line of Credit (“LOC”) also recognized as a Blanket Secured Promissory Note for the total draw down amount of up to $500,000, from Twiga Capital Partners, LLC (“TCP”), an entity controlled by the Company’s sole officer and largest stockholder, Shefali Vibhakar. This Note is secured by all of the assets of the Company in accordance with the Security Agreement by and between the Company and the Holder dated as of November 5, 2017. The LOC bears interest at 5% per annum and is due on demand. As of June 30, 2020 and 2019, the Company owed $122,729 and $122,729 of principal and $11,279 and $9,749 of accrued interest on the LOC, respectively.

NOTE 10 – INCOME TAXES

Deferred taxes are provided on a liability method whereby deferred tax assets are recognized for deductible temporary differences and operating loss and tax credit carry forwards and deferred tax liabilities are recognized for taxable temporary differences. Temporary differences are the differences between the reported amounts of assets and liabilities and their tax bases. Deferred tax assets are reduced by a valuation allowance when, in the opinion of management, it is more likely than not that some portion or all of the deferred tax assets will not be realized. The Company has evaluated Staff Accounting Bulletin No. 118 regarding the impact of the decreased tax rates of the Tax Cuts & Jobs Act. Deferred tax assets and liabilities are adjusted for the effects of changes in tax laws and rates on the date of enactment. The U.S. federal income tax rate of 21% is being used for the fiscal year ended June 30, 2020 and 2019.

Net deferred tax assets consist of the following components as of June 30:

The income tax provision differs from the amount of income tax determined by applying the U.S. federal income tax rate to pretax income from continuing operations for the period ended June 30, due to the following:

At June 30, 2020, the Company had net operating loss carry forwards of approximately $73,800 that may be offset against future taxable income from the year 2021 to 2039. No tax benefit has been reported in the June 30, 2020 financial statements since the potential tax benefit is offset by a valuation allowance of the same amount.

Due to the change in ownership provisions of the Tax Reform Act of 1986, net operating loss carry forwards for Federal Income tax reporting purposes are subject to annual limitations. Should a change in ownership occur, net operating loss carry forwards may be limited as to use in future years.

NOTE 11 - SUBSEQUENT EVENTS

In accordance with SFAS 165 (ASC 855-10) management has performed an evaluation of subsequent events through the date that the financial statements were available to be issued and has determined that it has the following material subsequent events to disclose in these financial statements.

On January 21, 2021, Shefali Vibhakar, President of the Company closed a Share Purchase Agreement (the “Agreement”) that she entered into with Johnny Forzani to sell all of her 17,000,000 common shares and 10,000,000 preferred shares to Johnny Forzani for cash consideration of $177,000.

Further, as part of the Agreement, Ms. Vibhakar agrees to spin out all of the Company’s assets (except for certain machinery valued at $40,000 – which is subject to a separate purchase agreement) as well as all of the Company’s liabilities (except the Company’s note with Tangiers Capital, LLC). The value date of the assets and liabilities will be January 21, 2021.

On January 21, 2021, a change in control of the Company occurred pursuant to the Agreement. Mr. Forzani now has voting control over 93.9% of the Company’s issued and outstanding common stock.

On January 21, 2021, the Company received the resignation of Shefali Vibhakar as the Company’s President, Chief Executive Officer, Treasurer, Chief Financial Officer, Secretary and Director and appointed Johnny Forzani as its President, Chief Executive Officer, Treasurer, Chief Financial Officer and Secretary.

Effective January 21, 2021, the Company’s new address is 30 Forzani Way NW, Calgary, Alberta, Canada T3Z 1L5.

On January 21, 2021, the Company entered into an acquisition agreement with Mr. Forzani to acquire all of the ownership and the rights to certain late developmental stage products, including the J4 Sport, J4 X and J4 Fitbelt in exchange for the issuance of 10,000,000 common shares. As a result of this acquisition, the Company is moving out of the precision CNC manufacturing and fabrication business and moving into the health-tech wearable performance business.

On February 17, 2021, the Company filed Articles of Continuance with the Secretary of State for the state of Wyoming. Accordingly, the Company transferred its state of formation from Florida to Wyoming and became a Wyoming entity.

On February 18, 2021, the Company filed a Certificate of Dissolution with the Secretary of State for the State of Florida, effectively dissolving the Company's existence in Florida.

On February 19, 2021, the Company filed a Definitive 14C in order to ratify the written consent received from one shareholder, holding 96.1% of our voting power to: (1) to amend the Company’s Articles of Incorporation, as amended (the “Articles”) to change our corporate name from Genesys Industries, Inc. to Forza Innovations Inc. (the “Name Change”); (2)to amend the Articles to increase the number of authorized shares of Class A Common Stock we may issue from 100,000,000 to 700,000,000 (the “Share Increase”); and, (3) to increase the number of the Company's total issued and outstanding shares of Class A Common Stock by conducting a forward stock split at the rate of 10 shares every 1 share currently issued and outstanding (the “Forward Split”).  FINRA has reviewed the Company’s submission of the Name Change, the Share Increase and the Forward Split and is waiting to process as soon as the Company becomes current with its SEC filings.