GENTEX CORP - Quarter Report: 2012 June (Form 10-Q)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-Q

(Mark one)

For the quarterly period ended June 30, 2012,

or

For the transition period from             to             

Commission File Number: 0-10235

GENTEX CORPORATION

(Exact name of registrant as specified in its charter)

(616) 772-1800

(Registrant’s telephone number, including area code)

(Former name, former address and former fiscal year, if changed since last report)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).     Yes  x    No  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by a check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).     Yes  ¨    No  x

APPLICABLE ONLY TO ISSUERS INVOLVED IN BANKRUPTCY PROCEEDINGS DURING THE PRECEEDING FIVE YEARS:

Indicate by check mark whether the registrant has filed all documents and reports required to be filed by Sections 12, 13 or 15(d) of the Securities Exchange Act of 1934 subsequent to the distribution of securities under a plan confirmed by a court.     Yes  ¨    No  ¨

APPLICABLE ONLY TO CORPORATE ISSUERS:

Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date.

Exhibit Index located at page 23

PART I - FINANCIAL INFORMATION

Item 1. Consolidated Financial Statements.

GENTEX CORPORATION AND SUBSIDIARIES

CONDENSED CONSOLIDATED BALANCE SHEETS

See accompanying notes to condensed consolidated financial statements.

- 2 -

GENTEX CORPORATION AND SUBSIDIARIES

UNAUDITED CONDENSED CONSOLIDATED STATEMENTS OF INCOME

See accompanying notes to condensed consolidated financial statements.

GENTEX CORPORATION AND SUBSIDIARIES

UNAUDITED CONDENSED CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

See accompanying notes to condensed consolidated financial statements.

- 3 -

GENTEX CORPORATION AND SUBSIDIARIES

UNAUDITED CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

For the Six Months Ended June 30, 2012 and 2011

See accompanying notes to condensed consolidated financial statements.

- 4 -

GENTEX CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(Unaudited)

In May 2011, the FASB issued Accounting Standards Update No. 2011-04, “Fair Value Measurement” (“ASU 2011-04”). ASU 2011-04 amends ASC 820 to achieve common fair value measurement and disclosure requirements in U.S. Generally Accepted Accounting Principles (GAAP) and International Financial Reporting Standards (IFRS). The amended guidance requires information disclosure regarding transfers between Level 1 and Level 2 of the fair value hierarchy, information disclosure regarding sensitivity of a fair value measurement categorized within Level 3 of the fair value hierarchy to changes in unobservable inputs and any interrelationships between those unobservable inputs, and the categorization by level of the fair value hierarchy for items that are not measured at fair value. The amended guidance was effective for financial periods beginning after December 15, 2011. ASU 2011-04 did not have a material effect on the Company’s consolidated financial position or results of operations.

In June 2011, FASB issued Accounting Standards Update No. 2011-05, “Presentation of Comprehensive Income” (“ASU 2011-05”). ASU 2011-05 eliminates the option to present components of other comprehensive income as part of the statement of changes in stockholders’ equity. Under ASU 2011-05, an entity has the option to present the total of comprehensive income, the components of net income, and the components of other comprehensive income either in a single or continuous statement of comprehensive income or in two separate consecutive statements. The amended guidance was effective for financial periods beginning after December 15, 2011. ASU 2011-05 did not have a material effect on the Company’s consolidated financial position or results of operations.

In December 2011, FASB issued Accounting Standards Update No. 2011-12, “Deferral of the Effective Date for Amendments to the Presentation of Reclassifications of Items Out of Accumulated Other Comprehensive Income in Accounting Standards Update No. 2011-05” (“ASU 2011-12”). ASU 2011-12 defers the effective date of ASU 2011-05 as it pertains to the effects of reclassifications out of accumulated other comprehensive income on the components of net income and other comprehensive income for all periods presented. The amended guidance was effective for financial periods beginning after December 15, 2011. ASU 2011-12 did not have a material effect on the Company’s consolidated financial position or results of operations.

The Company follows the provisions of ASC 820, “Fair Value Measurements and Disclosures” for its financial assets and liabilities, and to its non-financial assets and liabilities. ASC 820 provides a framework for measuring the fair value of assets and liabilities. This framework is intended to provide increased consistency in how fair value determinations are made under various existing accounting standards that permit, or in some cases, require estimates of fair-market value. This standard also expanded financial statement disclosure requirements about a company’s use of fair-value measurements, including the effect of such measure on earnings.

- 5 -

GENTEX CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS — Continued

(Unaudited)

The Company’s investment securities are classified as available for sale and are stated at fair value based on quoted market prices. Assets or liabilities that have recurring measurements are shown below as of June 30, 2012 and December 31, 2011:

As of June 30, 2012:

As of December 31, 2011:

- 6 -

GENTEX CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS — Continued

(Unaudited)

The Company determines the fair value of its U.S. Treasury Notes, Government Securities and Corporate Bonds by utilizing monthly valuation statements that are provided by its broker. The broker determines the investment valuation by utilizing the bid price in the market. The Company also refers to third party sources to validate valuations.

The amortized cost, unrealized gains and losses, and market value of investment securities are shown as of June 30, 2012 and December 31, 2011:

As of June 30, 2012:

As of December 31, 2011:

- 7 -

GENTEX CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS — Continued

(Unaudited)

Unrealized losses on investments as of June 30, 2012, are as follows:

Unrealized losses on investments as of December 31, 2011 are as follows:

ASC 320, “Accounting for Certain Investments in Debt and Equity Securities”, as amended and interpreted, provided guidance on determining when an investment is other than temporarily impaired. The Company reviews its fixed income and equity investment portfolio for any unrealized losses that would be deemed other-than-temporary and require the recognition of an impairment loss in income. If the cost of an investment exceeds its fair value, the Company evaluates, among other factors, general market conditions, the duration and extent to which the fair value is less than cost, and the Company’s intent and ability to hold the investments. Management also considers the type of security, related-industry and sector performance, as well as published investment ratings and analyst reports, to evaluate its portfolio. Once a decline in fair value is determined to be other than temporary, an impairment charge is recorded and a new cost basis in the investment is established. If market, industry, and/or investee conditions deteriorate, the Company may incur future impairments. No equity investment losses were considered to be other than temporary at June 30, 2012.

Fixed income securities as of June 30, 2012, have contractual maturities as follows:

- 8 -

GENTEX CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS — Continued

(Unaudited)

At June 30, 2012, the Company had two stock option plans, a restricted stock plan and an employee stock purchase plan. Readers should refer to Note 5 of our consolidated financial statements in our Annual Report on Form 10-K for the calendar year ended December 31, 2011, for additional information related to these stock-based compensation plans.

The Company recognized compensation expense for share-based payments of $3,554,026 and $6,959,580 for the second quarter and six months ended June 30, 2012, respectively. Compensation cost capitalized as part of inventory as of June 30, 2012, was $199,263.

Employee Stock Option Plan

The fair value of each option grant in the Employee Stock Option Plan was estimated on the date of grant using the Black-Scholes option pricing model with the following weighted-average assumptions for the indicated periods:

- 9 -

GENTEX CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS — Continued

(Unaudited)

The Company determined that all employee groups exhibit similar exercise and post-vesting termination behavior to determine the expected term. Under the plan, the option exercise price equals the stock’s market price on date of grant. The options vest after one to five years, and expire after three to seven years.

As of June 30, 2012, there was $21,595,931 of unrecognized compensation cost related to share-based payments which is expected to be recognized over the vesting periods.

Non-employee Director Stock Option Plan

In May 2012, an Amended and Restated Nonemployee Director Stock Option Plan, covering a total of 500,000 shares of common stock, was approved by shareholders replacing a prior plan. The Company has granted options on 42,000 shares under the new director plan through June 30, 2012. As of June 30, 2012, there was $249,887 of unrecognized compensation cost under the director plans related to share-based payments. Under the shareholder approved plans, the option exercise price equals the stock’s market price on date of grant. The options vest after six months, and expire after ten years.

Employee Stock Purchase Plan

The Company has an Employee Stock Purchase Plan covering 1,200,000 shares that was approved by the shareholders, replacing a prior plan. Under the plan, the Company sells shares at 85% of the stock’s market price at date of purchase. Under ASC 718, the 15% discounted value is recognized as compensation expense.

Restricted Stock Plan

The Company has a Restricted Stock Plan covering 2,000,000 shares of common stock that was approved by the shareholders. The purpose of the plan is to permit grants of shares, subject to restrictions, to key employees of the Company as a means of retaining and rewarding them for long-term performance and to increase their ownership in the Company. Shares awarded under the plan entitle the shareholder to all rights of common stock ownership except that the shares may not be sold, transferred, pledged, exchanged or otherwise disposed of during the restriction period. The restriction period is determined by the Compensation Committee, appointed by the Board of Directors, but may not exceed ten years under the terms of the plan. As of June 30, 2012, the Company had unearned stock-based compensation of $7,494,250 associated with these restricted stock grants. The unearned stock-based compensation related to these grants is being amortized to compensation expense over the applicable restriction periods. Amortization expense from restricted stock grants in the second quarter and six months ended June 30, 2012, was $477,099 and $1,032,125, respectively.

- 10 -

GENTEX CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS — Continued

(Unaudited)

The “Other segment includes Fire Protection Products and Dimmable Aircraft Windows.

- 11 -

RESULTS OF OPERATIONS:

SECOND QUARTER 2012 VERSUS SECOND QUARTER 2011

Net Sales. Net sales for the second quarter of 2012 increased by approximately $37,254,000, or 15%, when compared with the second quarter last year. Net sales of the Company’s automotive mirrors (including features) increased by approximately $36,629,000, or 15%, in the second quarter of 2012, when compared with the second quarter last year, primarily due to 19% increase in auto-dimming mirror unit shipments from approximately 5,094,000 in the second quarter of 2011 to approximately 6,042,000 in the current quarter. This unit increase was primarily due to increased penetration of auto-dimming mirrors and increased light vehicle production in North America and Japan/Korea. Unit shipments to customers in North America for the current quarter increased by 33% compared with the second quarter of the prior year, primarily due to increased auto-dimming mirror unit shipments to the Japanese transplant and domestic automakers. Mirror unit shipments for the current quarter to automotive customers outside North America increased by 10% compared with the second quarter in 2011, primarily due to increased auto-dimming mirror unit shipments to certain Japanese automakers.

Other net sales increased by approximately $625,000, or 13% for the current quarter versus the same quarter of last year, primarily due to an increase in dimmable aircraft window net sales, partially offset by a 7% decline in fire protection net sales quarter over quarter. The quarter-over-quarter increase in dimmable window net sales was primarily due to increased unit shipments for the Boeing 787 Dreamliner series of aircraft. Fire protection net sales continue to be impacted by the relatively weak commercial construction market.

Cost of Goods Sold. As a percentage of net sales, cost of goods sold increased from 64.8% in the second quarter of 2011 to 66.9% in the second quarter of 2012. This quarter-over-quarter percentage increase in cost of goods sold primarily reflected the impact of annual automotive customer price reductions and product mix, partially offset by purchasing cost reductions. Each negative factor is estimated to have impacted cost of goods sold as a percentage of net sales by approximately 1-2 percentage points.

Operating Expenses. Engineering, research and development (E, R & D) expenses for the current quarter increased 13% and approximately $2,547,000 when compared with the same quarter last year, primarily due to additional hiring of employees to support new product development projects and program awards.

Selling, general and administrative (S, G & A) expenses increased 3% and approximately $321,000 for the current quarter, when compared with the same quarter last year, primarily due to continued overseas office hiring to support our overseas growth, partially offset by foreign exchange rates. Foreign exchange rates accounted for approximately a five percentage point reduction in selling, general and administrative expenses quarter over quarter.

Total Other Income. Total other income for the current quarter decreased by approximately $1,334,000, when compared with the same quarter last year, primarily due to changes in the foreign currency rate related to the Company’s Euro denominated account.

Taxes. The provision for income taxes varied from the statutory rate for the current quarter, primarily due to the domestic manufacturing deduction.

Net Income. Net income for the second quarter of 2012 increased by approximately $2,294,000, when compared with the same quarter last year, primarily due to increased net sales and gross profit.

- 12 -

SIX MONTHS ENDED JUNE 30, 2012, VS. SIX MONTHS ENDED JUNE 30, 2011

Net Sales. Net sales for the six months ended June 30, 2012 increased by approximately $77,015,000, or 16%, when compared with the same period last year. Net sales of the Company’s automotive mirrors increased by approximately $76,023,000, or 16% period over period, as auto-dimming mirror unit shipments increased by 17% period over period from approximately 10,512,000 in the first six months of 2011 to approximately 12,307,000 in the first six months of 2012. The increase was primarily due to increased light vehicle production in North America and Japan/Korea as well as increased penetration of auto-dimming mirrors on 2012 model year vehicles. Unit shipments to customers in North America increased by 25% during the first six months of 2012 versus the same period in 2011, primarily due to increased auto-dimming mirror unit shipments for domestic automakers as well as Japanese and European transplant automakers. Mirror unit shipments to automotive customers outside North America increased by 12% period over period, primarily due to increased auto-dimming mirror unit shipments to certain European and Japanese automakers.

Other net sales increased by 10% period over period, due to an increase in dimmable window sales, partially offset by a 3% decrease in fire protection sales period over period. The period over period increase in dimmable window net sales was primarily due to increased unit shipments for the Boeing 787 Dreamliner series of aircraft. Fire protection net sales continue to be impacted by the relatively weak commercial construction market.

Cost of Goods Sold. As a percentage of net sales, cost of goods sold increased from 64.4% in the six months ended June 30, 2011, to 66.1% in the six months ended June 30, 2012. This percentage increase primarily reflected the impact of annual automotive customer price reductions, partially offset by purchasing cost reductions.

Operating Expenses. For the six months ended June 30, 2012, engineering, research and development expenses increased 17% and approximately $6,847,000, when compared with the same period last year, primarily due to additional hiring of employee and outside contract engineering/development services to support new product development projects and program awards.

Selling, general and administrative expenses increased 5% and approximately $1,120,000 for the six months ended June 30, 2012, when compared with the same period last year, primarily due to continued overseas office hiring to support our overseas growth, partially offset by foreign exchange rates. Foreign exchange rates accounted for approximately a five percentage point reduction in selling, general and administrative expenses period over period.

Total Other Income. Total other income for the six months ended June 30, 2012, decreased by approximately $1,412,000, when compared with the same period last year, primarily due to changes in the foreign currency rate related to the Company’s Euro denominated account and reduced realized gains on the sale of equity investments. Each factor accounted for approximately half of the decline in total other income.

Taxes. The provision for income taxes varied from the statutory rate during the six months ended June 30, 2012, primarily due to the domestic manufacturing deduction.

Net Income. Net income increased by approximately $6,306,000 for the six months ended June 30, 2012, when compared with the same period last year, primarily due to increased net sales and gross profit.

FINANCIAL CONDITION:

Cash and cash equivalents as of June 30, 2012, increased approximately $17,720,000 compared to December 31, 2011. The increase was primarily due to cash flow from operations and fixed income maturities, partially offset by capital expenditures and dividends paid.

Short-term investments as of June 30, 2012 decreased approximately $14,861,000 compared with December 31, 2011, primarily due to fixed income investment maturities.

- 13 -

Accounts receivable as of June 30, 2012 increased approximately $19,559,000 compared with December 31, 2011, primarily due to the higher sales level as well as monthly sales within each of those quarters.

Long-term investments as of June 30, 2012 increased approximately $9,388,000 compared to December 31, 2011, primarily due to an increase in unrealized gains in equity investments as a result of current market conditions.

Accrued liabilities as of June 30, 2012 increased approximately $17,273,000 compared to December 31, 2011, primarily due to changes in accrued compensation, reflecting the timing of certain compensation payments.

Cash flow from operating activities for the six months ended June 30, 2012, decreased approximately $3,086,000 to approximately $101,529,000, compared with approximately $104,615,000, during the same period last year, primarily due to changes in working capital, partially offset by increased net income. Capital expenditures for the six months ended June 30, 2012, were approximately $69,424,000, compared with approximately $48,995,000 for the same period last year, primarily due to building/improvement related costs and production equipment purchases. Building/improvement related costs were approximately $45,000,000 in the first six months of 2012.

The Company’s existing automotive interior mirror manufacturing facilities in Zeeland and Holland, Michigan, currently have estimated building capacity to manufacture approximately 16-18 million interior mirror units annually, based on current product mix. The Company’s automotive exterior mirror manufacturing facility has an estimated building capacity to manufacture approximately 6 million units annually, based on current product mix.

The Company previously announced the following expansion plans to increase plant capacity in the electronic assembly, final assembly and exterior mirror manufacturing areas:

The above expansion projects are expected to be funded from current cash and/or cash equivalents on hand.

After the above expansion projects are completed, the Company estimates that it will have building capacity to manufacture approximately 21-23 million interior mirror units annually and approximately 10 million exterior mirror units annually, based in each case on current product mix.

The Company believes its existing and planned facilities are suitable, adequate, and have the capacity necessary for current and near-term planned business. However, the Company continues to evaluate longer-term facility needs to support demand for its products. As a result, the Company is performing master planning and infrastructure improvements at a 140 acre site (near existing facilities) that the Company currently owns to prepare for its next facility. The timing of new facility construction is still uncertain due to the volatile economic environment, uncertainty in the automotive industry, as well as uncertainties related to the timing of the ramp up of certain products.

- 14 -

Management considers the Company’s working capital and long-term investments totaling approximately $808,285,000 as of June 30, 2012, together with internally generated cash flow and an unsecured $5,000,000 line of credit from a bank, to be sufficient to cover anticipated cash needs for the next year and for the foreseeable future.

On October 8, 2002, the Company announced a share repurchase plan, under which it may purchase up to 8,000,000 shares (post-split) based on a number of factors, including market conditions, the market price of the Company’s common stock, anti-dilutive effect on earnings, available cash and other factors that the Company deems appropriate. On July 20, 2005, the Company announced that it had raised the price at which the Company may repurchase shares under the existing plan. On May 16, 2006, the Company announced that the Company’s Board of Directors had authorized the repurchase of an additional 8,000,000 shares under the plan. On August 14, 2006, the Company announced that the Company’s Board of Directors had authorized the repurchase of an additional 8,000,000 shares under the plan. On February 26, 2008, the Company announced that the Company’s Board of Directors had authorized the repurchase of an additional 4,000,000 shares under the plan. The following is a summary of quarterly share repurchase activity under the plan to date:

1,971,829 shares remain authorized to be repurchased under the plan as of June 30, 2012.

CRITICAL ACCOUNTING POLICIES:

The preparation of the Company’s consolidated condensed financial statements contained in this report, which have been prepared in accordance with accounting principles generally accepted in the Unites States, requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. On an ongoing basis, management evaluates these estimates. Estimates are based on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that may not be readily apparent from other sources. Historically, actual results have not been materially different from the Company’s estimates. However, actual results may differ from these estimates under different assumptions or conditions.

The Company has identified the critical accounting policies used in determining estimates and assumptions in the amounts reported in its Management’s Discussion and Analysis of Financial Condition and Results of Operations in its Annual Report on Form 10-K for the fiscal year ended December 31, 2011. Management believes there have been no significant changes in those critical accounting policies during the most recently completed quarter.

- 15 -

TRENDS AND DEVELOPMENTS:

The Company previously announced a number of OEM and dealer or port-installed programs for its Rear Camera Display (RCD) Mirror that consists of a liquid crystal display (LCD) that shows a panoramic video of objects behind the vehicle in real time. During the current quarter, the Company announced that its RCD Mirror is offered on the Mazda CX-5 for the Japanese market. The auto-dimming RCD Mirror for the Mazda CX-5 shows the view from the backup camera, but also, with the press of a button, shows the view along the passenger side of the vehicle from a camera located in the exterior mirror. The Company is currently shipping auto-dimming mirrors with RCD for 60 vehicle models with 10 automakers. The Company is also shipping auto-dimming mirrors with RCD for over 20 aftermarket or dealer-installed programs.

The “Cameron Gulbransen Kids Transportation Safety Act of 2007” (KTSA) and the pending requirement that all new vehicles in the United States will be required to be equipped with cameras and rear camera displays by September 2014 has been delayed three times. Notwithstanding these delays, the final rule is still in the Office of Management and Budget (OMB), and the Secretary of Transportation Ray LaHood indicated that the final rule is currently expected by December 31, 2012.

The Company’s RCD mirrors have always been sold to automakers that have multiple options for where the Rear Camera Display is located. While there continues to be a lot of uncertainty among the Company’s current RCD mirror automotive customers as a result of the rulemaking delays, the Company has recently confirmed that four of its customers are changing their primary Rear Camera Display location from the mirror to a radio display location in the center console. The impact of two of those customer location changes are expected to materially impact the Company’s RCD mirror unit shipments negatively in the 2013 calendar year. The RCD location changes at the other two customers will begin to materially impact the Company’s RCD mirror unit shipments negatively beginning in calendar year 2014. It is the Company’s understanding that these location change decisions were primarily driven to reduce cost. The radio location is now expected to be the primary rear camera display location for these four automakers.

The Company continues to believe that most automakers will continue to have a multi-pronged location approach for rear camera displays, with the market divided into two primary market segments:

The Company still believes that its cost-competitive RCD Mirror product is an optimum, ergonomic, easily adaptable method to display the image produced by the rear camera for increased safety, and automakers could utilize rear cameras with the display in a RCD Mirror to satisfy the requirements of the legislation. The Company also continues to believe that this will be a very competitive market, as automotive customers consider different options for the location where that image from the camera can be displayed in the vehicle (i.e. the navigation system, and other radio or multi-purpose displays).

In addition, The Company continues to believe that its RCD Mirror product will be implemented in three overlapping phases by automakers:

- 16 -

The Company previously announced it is shipping auto-dimming mirrors with SmartBeam^®, its proprietary intelligent high-beam headlamp assist feature to a number of automakers. The SmartBeam^® product is a single-function driver-assist feature for headlamp lighting control that competes with multiple-function drivers-assist features that include headlamp lighting control as one of the multiple functions. While we expect SmartBeam^® to help provide growth over the next several years, competition from multiple-function drivers-assist products could impact our expectations. As the Company continues to expand the capabilities of its CMOS (complementary metal oxide semiconductor) imager technology for additional features, the Company recognizes that it is competing against multiple-function driver-assist technologies that could present a competitive threat for SmartBeam^®.

The Company previously announced that it has begun shipping its new vision-based, glare-free high-beam system (known as SmartBeam^® DFL (Dynamic Forward Lighting)). The new DFL vision-based system consists of a custom CMOS image sensor combined with algorithmic decision-making to offer constant “on” glare-free high beams.

During the current quarter, the Company announced that it is supplying auto-dimming mirrors with a new, camera-based driver-assist system for the 2013 Ford Explorer. The Company’s new driver-assist system uses a multi-function camera combined with algorithmic decision-making to perform Automatic High-Beam Control, Lane Keeping and Driver Alert. The system was developed in conjunction with Mobileye^®, the global pioneer in the development of vision-based driver-assistance systems. The Automatic-High-Beam Control turns a vehicle’s high beams on and off automatically according to surrounding traffic conditions. In Lane Keeping mode, the driver is warned by vibration in the steering wheel, while the Lane Keeping function warns the driver by applying torque at the steering wheel to direct the vehicle back into the lane. Driver Alert monitors the vehicle’s lane position and can notify a driver of signs of inattentiveness with a coffee cup warning light that appears on the dashboard instrument cluster. Certain components, including the camera and microprocessor, are integrated into a Gentex interior auto-dimming mirror. The Company also recently announced that it is supplying auto-dimming mirrors with the Company’s own SmartBeam^® lighting assist system, as well as auto-dimming mirrors with a camera-based driver-assist system (Automatic-High-Beam Control, Lane Keeping and Driver Alert) for the new 2013 Lincoln MKS and the 2013 Lincoln MKT. The Company is currently shipping auto-dimming mirrors with SmartBeam^® and/or Driver-Assist features for 68 vehicle models to 13 automakers.

On June 25, 2012, American Vehicular Sciences LLC (“AVS”) filed 4 patent infringement complaints, in the United States District Court, in the Eastern District of Texas, which names the Company and one of two of its customers as co-defendants. In two of the complaints (#6:12-cv-00413 and #6:12-cv-00406), AVS alleges that the Company’s SmartBeam product infringes one patent owned by AVS. In the other two complaints (#6:12-cv-00410 and #6:12-cv-00415) AVS alleges that the Company’s monitoring system products infringe two other patents owned by AVS. The Company was served with the four complaints on July 27, 2012, and is currently evaluating the allegations of infringement. The Company is uncertain of what impact, if any, the above claims may potentially have on its business.

The Company previously announced that it was working with PPG Aerospace to provide the variably dimmable windows for the passenger compartment on the new Boeing 787 Dreamliner series of aircraft. As previously announced, Boeing delivered the first 787 Dreamliner Series of Aircraft to All Nippon Airways (ANA) on September 27, 2011. The Company and PPG Aerospace previously announced that they will work together to supply dimmable windows to Hawker Beechcraft Corporation for the passenger-cabin windows of the 2010 Beechcraft King Air 350i airplane.

There recently was a news report that ANA was not satisfied with the darkness level of the aircraft windows that the Company supplies with PPG Aerospace. That story was refuted the next day in a blog posted by airlinereporter.com.

- 17 -

Flooding in Thailand as a result of heavy rain and monsoons in late July 2011 resulted in additional supply chain disruptions as production at certain component supplier plants was moved to their plants in other countries, putting certain suppliers outside of Thailand in over-capacity situations. Gaining access to those components and ensuring adequate supply resulted in additional costs to the Company during the fourth quarter of 2011. The Company did experience sequential improvement in this area during the first and second quarters of 2012. The costs associated with these particular supply chain constraints/disruptions have been resolved as of June 30, 2012, barring another natural disaster impacting the supply chain. To date, the supply chain related issues the Company has experienced have not disrupted deliveries to customers, but the Company continues to apply measures to ensure adequate supply of certain automotive-grade components, including carrying additional inventory.

The Company continues to experience significant pricing pressures from its automotive customers and competitors, which have affected, and which will continue to affect, its margins to the extent that the Company is unable to offset the price reductions with engineering and purchasing cost reductions, productivity improvements, and increases in unit sales volume, each of which pose a challenge. In addition, financial pressures and increasing production volumes at certain automakers are resulting in increased cost reduction efforts by them, including requests for additional price reductions, decontenting certain features from vehicles, customer market testing of future business, dual sourcing initiatives and warranty cost-sharing programs, which could adversely impact the Company’s business, financial condition, and/or results of operations.

The automotive industry has always been cyclical and highly impacted by levels of economic activity. The current economic environment continues to be uncertain and continues to cause increased financial and production stresses evidenced by volatile production levels, supply chain disruptions, supplier part shortages, automotive plant shutdowns, customer and supplier financial issues/bankruptcies, commodity material cost increases, and consumer preference shift to smaller vehicles, where the Company has a lower penetration rate and lower content per vehicle, due to increasing fuel costs and environmental concerns. If additional automotive customers (including their Tier 1 suppliers) and suppliers experience bankruptcies, work stoppages, strikes, part shortages, etc., it could disrupt the Company’s shipments to these customers, which could adversely affect the Company’s business, financial condition, and/or results of operations.

Automakers continue to experience increased volatility and uncertainty in executing planned new programs which have, in some cases, resulted in delays or cancellations of new vehicle platforms, package reconfigurations and inaccurate volume forecasts. This volatility and uncertainty have made it more difficult for the Company to forecast future sales and effectively manage costs, inventory, and utilize capital, engineering, research and development, and human resource investments.

During the current quarter, the Company negotiated a long term agreement with VW/Audi in the ordinary course of the Company’s business. Under the agreement, the Company is the exclusive supplier of all interior and exterior auto-dimming rearview mirror products sourced through December 31, 2018.

The Company currently estimates that its top line revenue will be in the range of flat to an increase of 5% in the third quarter of 2012 compared with the third quarter of 2011, based on the IHS Worldwide June forecast for current light vehicle production forecasts in the regions to which the Company ships product, as well as the estimated option rates for the Company’s mirrors on vehicle models and anticipated product mix. Continuing uncertainties, including the light vehicle production levels, supplier part shortages, automotive plant shutdowns, sales rates in Europe, North America and Asia, customer inventory management and the impact of potential automotive customer (including their Tier 1 suppliers) and supplier bankruptcies, work stoppages, strikes, etc., which could disrupt Company shipments to customers, make forecasting difficult. The Company also continues to experience increasing volatility with customer orders within its 12-week customer release window with some customers, including tier 1 mirror suppliers, revising orders at the last minute.

The Company currently expects that its gross margin in the third quarter of 2012 will improve approximately 50 basis points compared to the gross margin reported in the second quarter of 2012, primarily due to production efficiencies.

The Company also estimates that engineering, research and development expenses are currently expected to increase approximately 10% in the third quarter of 2012 compared with the same quarter in 2011, primarily due to hiring of employee and outside contract engineering/development services to support product development projects and program awards.

- 18 -

Selling, general and administrative expenses are currently expected to increase approximately 5% in the third quarter of 2012 compared with the same quarter in 2011, primarily due to continued overseas office hiring to support the Company’s overseas growth. This estimate is based on stable foreign exchange rates.

Based on the IHS June forecast for light vehicle production levels for the entire 2012 year, the Company continues to estimate that RCD Mirror unit shipments will be approximately flat in calendar year 2012 compared with calendar year 2011.

Based on the IHS June forecast for light vehicle production levels for the entire 2012 year, the Company now estimates that SmartBeam^® unit shipments will increase approximately 20-25% in calendar year 2012 compared with calendar year 2011. This downward revision to our previous 2012 SmartBeam guidance is primarily due to lower take rates and packaging changes at certain European customers, and declines in European light vehicle production on vehicle models that offer SmartBeam (our SmartBeam products are predominantly sold in Europe). The Company does not believe that this is a long-term trend, as there continues to be significant interest in the SmartBeam product globally.

The Company utilizes the light vehicle production forecasting services of IHS Worldwide. The IHS June forecast for light vehicle production for the third quarter of 2012 are approximately 3.4 million units for North America, 4.2 million for Europe and 3.5 million for Japan and Korea. The IHS June forecast for light vehicle production for calendar year 2012 are approximately 14.9 million for North America, 18.9 million for Europe and 14.1 million for Japan and Korea.

The Company is subject to market risk exposures of varying correlations and volatilities, including foreign exchange rate risk, interest rate risk and equity price risk. Volatile equity markets could negatively impact the Company’s financial performance due to realized losses on the sale of equity investments and/or recognized losses due to a other-than-temporary impairment adjustment on available-for-sale securities (mark-to-market adjustments). During the quarter ended June 30, 2012, there were no material changes in the risk factors previously disclosed in the Company’s report on Form 10-K for the fiscal year ended December 31, 2011.

The Company has some assets, liabilities and operations outside the United States, including a euro-denominated account, which currently are not significant overall to the Company as a whole. Because the Company sells its automotive mirrors throughout the world, and automotive manufacturing is highly dependent on general economic conditions, the Company could be affected by uncertain economic conditions in foreign markets that can reduce demand for its products.

In light of the on-going financial stresses within the worldwide automotive industry, certain automakers and Tier 1 customers are considering the sale of certain business segments or may be considering bankruptcy. Should one or more of the Company’s larger customers (including sales through their Tier 1 suppliers) declare bankruptcy or sell their business, it could adversely affect the collection of receivables, business more generally, financial condition, and/or results of operations. The uncertain economic environment continues to cause financial pressures and production stresses on the Company’s customers, which could impact timely customer payments and ultimately the collectibility of receivables.

The Company does not have any significant off-balance sheet arrangements or commitments that have not been recorded in its consolidated financial statements.

The information called for by this item is provided under the caption “Trends and Developments” under Item 2 – Management’s Discussion and Analysis of Financial Condition and Results of Operations.

- 19 -

The Company’s management, with the participation of its principal executive officer and principal financial officer, has evaluated the effectiveness, as of June 30, 2012, of the Company’s “disclosure controls and procedures,” as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Based upon that evaluation, the Company’s management, including the principal executive officer and principal financial officer, concluded that the Company’s disclosure controls and procedures, as of June 30, 2012, were adequate and effective such that the information required to be disclosed by the Company in the reports filed or submitted by it under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and information required to be disclosed by the Company in such reports is accumulated and communicated to the Company’s management, including its principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosure.

In the ordinary course of business, the Company may routinely modify, upgrade, and enhance its internal controls and procedures over financial reporting. However, there was no change in the Company’s “internal control over financial reporting” [as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act] that occurred during the quarter ended June 30, 2012, that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

SAFE HARBOR STATEMENT:

Statements in this Quarterly Report on Form 10-Q contain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act, as amended, that are based on management’s beliefs, assumptions, current expectations, estimates and projections about the global automotive industry, the economy and the Company itself. Words like “anticipates,” “believes,” “confident,” “estimates,” “expects,” “forecasts,” “hopes”, “likely,” “plans,” “projects,” “optimistic,” and “should,” and variations of such words and similar expressions identify forward-looking statements. These statements do not guarantee future performance and involve certain risks, uncertainties, and assumptions that are difficult to predict with regard to timing, expense, likelihood and degree of occurrence. These risks include, without limitation, the pace of economic activity in the United States and in international markets, employment and other general economic conditions; worldwide automotive production; the maintenance of the Company’s market share; the ability to control costs, including the ability to achieve purchasing and manufacturing cost reductions, control and leverage fixed overhead costs, and maintain margins; and the ability to control E,R&D and S,G&A expenses. Additionally, these risks include competitive pricing pressures; the mix of products purchased by customers; the market for and the success of certain of the Company’s mirror products (e.g. Rear Camera Display, SmartBeam^®, other camera-based driver-assist and lighting-assist products), including vehicle model penetration and option take rates; intellectual property litigation risk; the ability to continue to make product innovations; customer inventory management; currency fluctuations; interest rates; equity prices; the financial strength/stability of the Company’s customers (including their Tier 1 suppliers); potential impact of supply chain disruptions including but not limited to those caused by natural disasters and any other part shortages; potential sale of OEM business segments or suppliers; potential customer (including their Tier 1 suppliers) bankruptcies; and other risks identified in the Company’s other filings with the Securities and Exchange Commission. Therefore, actual results and outcomes may materially differ from what is expressed or forecasted. Furthermore, the Company undertakes no obligation to update, amend, or clarify forward-looking statements, whether as a result of new information, future events, or otherwise.

- 20 -

PART II—OTHER INFORMATION

Item 1A. Risk Factors.

Information regarding risk factors appears in Management’s Discussion and Analysis of Financial Condition and Results of Operations in Part I – Item 2 of this Form 10-Q and in Part I – Item 1A – Risk Factors of the Company’s report on Form 10-K for the fiscal year ended December 31, 2011. There have been no material changes from the risk factors previously disclosed in the Company’s report on Form 10-K for the year ended December 31, 2011, except to the extent described in Part I – Item 2 of this Form 10-Q.

Item 6. Exhibits

See Exhibit Index on Page 23.

- 21 -

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

- 22 -

EXHIBIT INDEX

- 23 -

- 24 -