Annual Statements Open main menu
  1. Annual Statements
  2. » Companies
  3. » GENTEX CORP
  4. » Quarter Report: 2018 March (Form 10-Q)

GENTEX CORP - Quarter Report: 2018 March (Form 10-Q)


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM 10-Q 
(Mark one)
üQUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 
For the quarterly period ended March 31, 2018 or 
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 
For the transition period from ______ to ______  
Commission File Number: 0-10235 
        
GENTEX CORPORATION
(Exact name of registrant as specified in its charter)
Michigan 38-2030505 
(State or other jurisdiction of
incorporation or organization)
(I.R.S. Employer
Identification No.)
600 N. Centennial, Zeeland, Michigan 49464 
(Address of principal executive offices) (Zip Code) 
(616) 772-1800
(Registrant’s telephone number, including area code)

________________________________________________________

(Former name, former address and former fiscal year, if changed since last report)

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.   
Yes:  þ No:  o    
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). 
Yes:  þ No:  o    
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer”, and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer üAccelerated filer 
Non-accelerated filer   (Do not check if a smaller reporting company) Smaller reporting company 

Indicate by a check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).     
Yes:  o  No:   þ
APPLICABLE ONLY TO ISSUERS INVOLVED IN BANKRUPTCY PROCEEDINGS DURING THE PRECEEDING FIVE YEARS:
Indicate by check mark whether the registrant has filed all documents and reports required to be filed by Sections 12, 13 or 15(d) of the Securities Exchange Act of 1934 subsequent to the distribution of securities under a plan confirmed by a court.
Yes:  o No:  o
APPLICABLE ONLY TO CORPORATE ISSUERS:
Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date.
Class Shares Outstanding, April 20, 2018 
Common Stock, $.06 Par Value 273,854,076 


GENTEX CORPORATION AND SUBSIDIARIES
For the Three Months Ended March 31, 2018 
FORM 10-Q
Index

Part I - Financial Information Page 
Item 1. 
Item 2. 
Item 3. 
Item 4. 
Part II - Other Information 
Item 1A. 
Item 2. 
Item 6. 


2
Table of Contents
PART I —FINANCIAL INFORMATION
Item 1. Unaudited Consolidated Financial Statements.
GENTEX CORPORATION AND SUBSIDIARIES
UNAUDITED CONDENSED CONSOLIDATED BALANCE SHEETS
As of  March 31, 2018 and December 31, 2017
March 31, 2018 December 31, 2017 
(Note) 
ASSETS 
CURRENT ASSETS 
Cash and cash equivalents $524,323,560 $569,734,496 
Short-term investments 152,179,408 152,538,054 
Accounts receivable, net 246,427,239 231,121,788 
Inventories 207,232,952 216,765,583 
Prepaid expenses and other 11,531,029 14,403,902 
Total current assets 1,141,694,188 1,184,563,823 
PLANT AND EQUIPMENT—NET 496,274,467 492,479,330 
OTHER ASSETS 
Goodwill 307,365,845 307,365,845 
Long-term investments 3,240,000 57,782,418 
Intangible Assets, net 284,150,000 288,975,000 
Patents and other assets, net 21,627,968 20,887,496 
Total other assets 616,383,813 675,010,759 
Total assets $2,254,352,468 $2,352,053,912 
LIABILITIES AND SHAREHOLDERS’ INVESTMENT 
CURRENT LIABILITIES 
Accounts payable $77,307,897 $89,898,467 
Current portion of long-term debt 50,000,000 78,000,000 
Accrued liabilities 100,861,709 75,748,540 
Total current liabilities 228,169,606 243,647,007 
DEFERRED INCOME TAXES 56,205,366 58,888,644 
TOTAL LIABILITIES 284,374,972 302,535,651 
SHAREHOLDERS’ INVESTMENT 
Common stock 16,431,263 16,816,879 
Additional paid-in capital 742,491,728 723,510,672 
Retained earnings 1,208,841,516 1,301,997,327 
Accumulated other comprehensive income 2,212,989 7,193,383 
Total shareholders’ investment 1,969,977,496 2,049,518,261 
Total liabilities and shareholders’ investment $2,254,352,468 $2,352,053,912 

Note: The condensed consolidated balance sheet at December 31, 2017 has been derived from the audited financial statements at that date but does not include all of the information and footnotes required by accounting principles generally accepted in the United States for complete financial statements.
See accompanying notes to condensed consolidated financial statements.
3
Table of Contents
GENTEX CORPORATION AND SUBSIDIARIES
UNAUDITED CONDENSED CONSOLIDATED STATEMENTS OF INCOME
For the Three months ended March 31, 2018 and 2017
 
Three Months Ended March 31, 
20182017
NET SALES $465,420,105 $453,535,250 
COST OF GOODS SOLD 292,791,704 277,734,465 
Gross profit 172,628,401 175,800,785 
OPERATING EXPENSES: 
Engineering, research and development 26,049,258 25,152,257 
Selling, general & administrative 18,063,810 16,221,408 
Total operating expenses 44,113,068 41,373,665 
Income from operations 128,515,333 134,427,120 
OTHER INCOME (LOSS) 
Investment income 2,037,605 1,472,527 
Other Income (Loss), net 1,206,993 (1,034,743)
Total Other Income 3,244,598 437,784 
Income before provision for income taxes 131,759,931 134,864,904 
PROVISION FOR INCOME TAXES 20,511,188 37,308,163 
NET INCOME $111,248,743 $97,556,741 
EARNINGS PER SHARE: 
Basic $0.40 $0.34 
Diluted $0.40 $0.33 
Cash Dividends Declared per Share $0.110 $0.090 
See accompanying notes to condensed consolidated financial statements.
4
Table of Contents
GENTEX CORPORATION AND SUBSIDIARIES
UNAUDITED CONDENSED CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME
For the Three months ended March 31, 2018 and 2017
Three Months Ended March 31, 
20182017
Net Income $111,248,743 $97,556,741 
Other comprehensive income (loss) before tax: 
Foreign currency translation adjustments 1,626,178 188,590 
Unrealized gains on derivatives 67,047 641,975 
Unrealized gains (losses) on debt securities, net (21,280)2,170,254 
Other comprehensive income, before tax 1,671,945 3,000,819 
Expense for income taxes related to components of other comprehensive income 9,611 984,280 
Other comprehensive income, net of tax 1,662,334 2,016,539 
Comprehensive Income $112,911,077 $99,573,280 
See accompanying notes to condensed consolidated financial statements.
5
Table of Contents
GENTEX CORPORATION AND SUBSIDIARIES
UNAUDITED CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS
For the Three months ended March 31, 2018 and 2017
 
20182017
CASH FLOWS FROM OPERATING ACTIVITIES: 
Net income $111,248,743 $97,556,741 
Adjustments to reconcile net income to net cash provided by operating activities: 
Depreciation and amortization 28,046,434 25,181,854 
Gain on disposal of assets (4,374)(146,261)
Loss on disposal of assets 8,677 359,959 
Gain on sale of investments (1,245,075)(274,844)
Loss on sale of investments 529,484 21,431 
Deferred income taxes (2,746,797)5,718,363 
Stock-based compensation expense related to employee stock options, employee stock purchases and restricted stock 3,977,471 4,422,996 
Change in operating assets and liabilities: 
Accounts receivable, net (15,305,451)(37,866,173)
Inventories 9,532,631 (7,776,814)
Prepaid expenses and other 2,872,873 18,857,501 
Accounts payable (12,590,570)(2,249,350)
Accrued liabilities, excluding dividends declared and short-term debt 23,125,002 27,385,768 
Net cash provided by operating activities 147,449,048 131,191,171 
CASH FLOWS USED FOR INVESTING ACTIVITIES: 
Activity in available-for-sale securities: 
Sales proceeds 53,822,052 1,316,280 
Maturities and calls 3,000,000 6,100,000 
Purchases (1,213,405)(16,225,018)
Plant and equipment additions (26,247,890)(27,119,993)
Proceeds from sale of plant and equipment 67,400 15,001 
Decrease (Increase) in other assets 45,322 (588,361)
Net cash provided by (used for) investing activities 29,473,479 (36,502,091)
CASH FLOWS USED FOR FINANCING ACTIVITIES: 
Repayment of debt (28,000,000)(41,875,000)
Issuance of common stock from stock plan transactions 36,267,047 17,237,232 
Cash dividends paid (28,028,132)(25,896,377)
Repurchases of common stock (202,572,378)(30,986,385)
Net cash used for financing activities (222,333,463)(81,520,530)
NET INCREASE IN CASH AND CASH EQUIVALENTS (45,410,936)13,168,550 
CASH AND CASH EQUIVALENTS, beginning of period 569,734,496 546,477,075 
CASH AND CASH EQUIVALENTS, end of period $524,323,560 $559,645,625 

See accompanying notes to condensed consolidated financial statements.
6
GENTEX CORPORATION AND SUBSIDIARIES

NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
Table of Contents

(1)  Basis of Presentation

The unaudited condensed consolidated financial statements included herein have been prepared by the Company, pursuant to the rules and regulations of the Securities and Exchange Commission. Certain information and footnote disclosures normally included in financial statements prepared in accordance with accounting principles generally accepted in the United States have been condensed or omitted pursuant to such rules and regulations, although the Company believes that the disclosures are adequate to make the information presented not misleading. It is suggested that these unaudited condensed consolidated financial statements be read in conjunction with the financial statements and notes thereto included in the Company's 2017 annual report on Form 10-K. In the opinion of management, the accompanying unaudited condensed consolidated financial statements contain all adjustments, consisting of only a normal and recurring nature, necessary to present fairly the financial position of the Company as of March 31, 2018, and the results of operations and cash flows for the interim period presented.


(2)  Adoption of New Accounting Pronouncements

New Accounting Pronouncements Adopted in Fiscal Year 2018

Effective January 1, 2018, the Company adopted ASC Topic 606, Revenue from Contracts with Customers, using the modified retrospective method as applied to customer contracts that were not completed as January 1, 2018. As a result, financial information for reporting periods beginning after January 1, 2018 are presented under ASC 606, while comparative financial information has not been adjusted and continues to be reported in accordance with the Company’s historical accounting policy for revenue recognition prior to the adoption of ASC 606. This guidance supersedes nearly all existing revenue recognition guidance under US GAAP. The core principle of the guidance is that an entity should recognize revenue when it transfers promised goods or services to customers in an amount that reflects the consideration to which the company expects to be entitled in exchange for those goods or services. In addition, ASU 2014-09 requires certain additional disclosures around the nature, amount, timing, and uncertainty of revenues and cash flows arising from contracts with customers. The Company has documented its accounting policy for the new standard based on a detailed review of its business and contracts. Based on the new guidance, the Company continues to recognize revenue at a particular point in time for the majority of its contracts with customers, which is generally when products are either shipped or delivered, as customer contracts did not meet the criteria in ASC 606 for over-time revenue recognition, specifically the over-time revenue recognition criteria of creating an asset with no alternative use and having an enforceable right to payment for progress towards completion. Therefore, the adoption of ASC 606 did not have a material impact on the consolidated financial statements. The Company has expanded its consolidated financial statement disclosures in order to comply with the disclosure requirements of the ASU. See Note 14 to the Unaudited Condensed Consolidated Financial Statements for additional disclosures regarding the Company’s revenue.

Effective January 1, 2018, the Company adopted ASU 2016-01, Recognition and Measurement of Financial Assets and Financial Liabilities. The standard amends various aspects of the recognition, measurement, presentation, and disclosure of financial instruments. The most significant impact to the Company's consolidated financial statements relates to the recognition and measurement of equity investments at fair value with changes recognized in net income. The amendment also updates certain presentation and disclosure requirements. The Company had a cumulative-effect adjustment in the first quarter of 2018 of approximately $6.6 million related to the reclassification of the net unrealized gain on available-for-sale securities as of January 1, 2018 from other comprehensive income to retained earnings due to the implementation of this guidance.

New Accounting Pronouncements Not Yet Adopted

In February 2016, the FASB issued ASU 2016-02, Leases, which provides guidance for lease accounting. The new guidance contained in the ASU stipulates that lessees will need to recognize a right-of-use asset and a lease liability for substantially all leases (other than leases that meet the definition of a short-term lease). The liability will be equal to the present value of lease payments. Treatment in the consolidated statements of earnings will be similar to the current treatment of operating and capital leases. The new guidance is effective on a modified retrospective basis for the Company in the first quarter of its fiscal year ending December 31, 2019. The Company is currently in the process of evaluating the impact of adoption of this standard on its consolidated financial statements. Upon adoption, the Company does not anticipate a material impact on the Company's Consolidated Financial Statements.

7
GENTEX CORPORATION AND SUBSIDIARIES
NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
Table of Contents

(3)  Goodwill and Other Intangible Assets

Goodwill represents the cost of an acquisition in excess of the fair values assigned to identifiable net assets acquired. The Company recorded Goodwill of $307.4 million as part of the HomeLink® acquisition. The carrying value of Goodwill as of December 31, 2017 and March 31, 2018 was $307.4 million.

In addition to annual impairment testing, which is performed as of the first day of the fourth quarter, the Company continuously monitors for events and circumstances that could negatively impact the key assumptions in determining fair value thus resulting in the need for interim impairment testing, including long-term revenue growth projections, profitability, discount rates, recent market valuations from transactions by comparable companies, volatility in the Company's market capitalization, and general industry, market and macroeconomic conditions. No such events or circumstances in the most recently completed quarter indicated the need for interim impairment testing.

The patents and intangible assets and related change in carrying values are set forth in the tables below: 

As of March 31, 2018:

Other Intangible Assets Gross Accumulated Amortization Net Assumed Useful Life 
Gentex Patents $36,352,536 $(19,760,899)$16,591,637 various 
Other Intangible Assets 
HomeLink® Trade Names and Trademarks
$52,000,000 $— $52,000,000 Indefinite 
HomeLink® Technology
180,000,000 (67,500,000)112,500,000 12 years
Existing Customer Platforms 43,000,000 (19,350,000)23,650,000 10 years
Exclusive Licensing Agreement 96,000,000 — 96,000,000 Indefinite 
Total Other Intangible Assets $371,000,000 $(86,850,000)$284,150,000 
Total Patents & Other Intangible Assets $407,352,536 $(106,610,899)$300,741,637 

        As of December 31, 2017:

Other Intangible Assets Gross Accumulated Amortization Net Assumed Useful Life 
Gentex Patents $34,847,029 $(18,943,554)$15,903,475 various 
HomeLink® Trade Names and Trademarks
$52,000,000 $— $52,000,000 Indefinite 
HomeLink® Technology
180,000,000 (63,750,000)$116,250,000 12 years
Existing Customer Platforms 43,000,000 (18,275,000)$24,725,000 10 years
Exclusive Licensing Agreement 96,000,000 — $96,000,000 Indefinite 
Total other identifiable intangible assets $371,000,000 $(82,025,000)$288,975,000 
Total Patents & Other Intangible Assets $405,847,029 $(100,968,554)$304,878,475 

Amortization expense on patents and intangible assets was approximately $5.7 million during the three month period ended March 31, 2018, compared to approximately $5.6 million for the same period ended March 31, 2017.

Excluding the impact of any future acquisitions, the Company continues to estimate amortization expense for each of the years ended December 31, 2018, 2019, 2020, 2021, and 2022 to be approximately $22 million annually.
8
GENTEX CORPORATION AND SUBSIDIARIES
NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
Table of Contents
(4) Investments
The Company follows the provisions of ASC 820, “Fair Value Measurements and Disclosures” for its financial assets and liabilities, and for its non-financial assets and liabilities subject to fair value measurements. ASC 820 provides a framework for measuring the fair value of assets and liabilities. This framework is intended to provide increased consistency in how fair value determinations are made under various existing accounting standards that permit, or in some cases, require estimates of fair-market value. This standard also expanded financial statement disclosure requirements about a company’s use of fair-value measurements, including the effect of such measurement on earnings. The cost of securities sold is based on the specific identification method.

Effective January 1, 2018, the Company adopted ASU 2016-01, Recognition and Measurement of Financial Assets and Financial Liabilities. The standard amends various aspects of the recognition, measurement, presentation, and disclosure of financial instruments. The most significant impact on the Company's consolidated financial statements relates to the recognition and measurement of equity investments at fair value with changes recognized in net income, though there are also updates to certain presentation and disclosures.  The Company had a cumulative-effect adjustment in the first quarter of 2018 of approximately $6.6 million related to the reclassification of the net unrealized gain on available-for-sale securities as of January 1, 2018 from other comprehensive income to retained earnings as a result of the implementation of this guidance.
The Company’s investments in common stock are stated at fair value based on quoted market prices, and as such are classified as Level 1 assets. The Company determines the fair value of its government securities and corporate bonds by utilizing monthly valuation statements that are provided by its broker. The broker determines the investment valuation by utilizing the bid price in the market and also refers to third party sources to validate valuations, and as such are classified as Level 2 assets.  
The Company's certificates of deposit have remaining maturities of less than one year and are considered as Level 1 assets. These investments are carried at cost, which approximates fair value.
During the year ended December 31, 2017, the Company made technology investments in certain non-consolidated affiliates for ownership interests of less than 20%.  These investments do not have readily determinable fair values, and the Company has not to date identified any observable events that would cause adjustment, and therefore these investments are held at cost at a total of $3.2 million as of March 31, 2018. These investments are classified within Long-Term Investments in the consolidated balance sheet. 
Long-term investments decreased from December 31, 2017 to March 31, 2018 as a result of the sale of the majority of the Company's available-for-sale equity investments as part of its previously announced capital allocation strategy.
Assets or liabilities that have recurring fair value measurements are shown below as of March 31, 2018 and December 31, 2017:
As of March 31, 2018:
Fair Value Measurements at Reporting Date Using 
Total as of 
Quoted Prices in
Active Markets for
Identical Assets
Significant Other
Observable
Inputs
Significant
Unobservable
Inputs
Description March 31, 2018(Level 1) (Level 2) (Level 3) 
Cash & Cash Equivalents $524,323,560 $524,323,560 $— $— 
Short-Term Investments: 
Certificate of Deposit 130,000,000 130,000,000 — — 
Corporate Bonds 15,891,817 — 15,891,817 — 
Government Securities 6,003,510 — 6,003,510 — 
Other 284,081 284,081 — — 
Long-Term Investments: 
Common Stocks 40,000 40,000 — — 
Total $676,542,968 $654,647,641 $21,895,327 $— 


9 
GENTEX CORPORATION AND SUBSIDIARIES
NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
Table of Contents
As of December 31, 2017:

Fair Value Measurements at Reporting Date Using 
Total as of Quoted Prices in Active Markets for Identical Assets Significant Other Observable Inputs Significant Unobservable Inputs 
Description December 31, 2017(Level 1) (Level 2) (Level 3) 
Cash & Cash Equivalents $569,734,496 $569,734,496 $— $— 
Short-Term Investments: 
Certificate of Deposit 130,000,000 130,000,000 — — 
Government Securities 9,011,130 — 9,011,130 — 
Mutual Funds 393,581 — 393,581 — 
Corporate Bonds 12,944,999 — 12,944,999 — 
Other 188,344 188,344 — — 
Long-Term Investments: 
Corporate Bonds 3,018,720 — 3,018,720 — 
Common Stocks 15,703,371 15,703,371 — — 
Mutual Funds 34,681,337 34,681,337 — — 
Preferred Stock 1,178,991 1,178,991 — — 
Total $776,854,969 $751,486,539 $25,368,430 $— 

The amortized cost, unrealized gains and losses, and market value of investment securities are shown as of  March 31, 2018, and December 31, 2017:

As of March 31, 2018:
Unrealized 
Cost Gains Losses Market Value 
Short-Term Investments: 
Certificate of Deposit $130,000,000 $— $— $130,000,000 
Government Securities 6,009,310 — (5,800)6,003,510 
Corporate Bonds 15,919,177 — (27,360)15,891,817 
Other 284,081 — — 284,081 
Long-Term Investments: 
Common Stocks 40,000 — — 40,000 
Total $152,252,568 $— $(33,160)$152,219,408 
















10 
GENTEX CORPORATION AND SUBSIDIARIES
NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
Table of Contents
As of December 31, 2017:
Unrealized 
Cost Gains Losses Market Value 
Short-Term Investments: 
Certificate of Deposit $130,000,000 $— $— $130,000,000 
Government Securities 9,024,777 — (13,647)9,011,130 
Mutual Funds 392,482 1,575 (476)393,581 
Corporate Bonds 12,952,229 — (7,230)12,944,999 
Other 188,344 — — 188,344 
Long-Term Investments: 
Corporate Bonds 3,022,994 — (4,274)3,018,720 
Common Stocks 10,897,219 5,079,815 (273,663)15,703,371 
Mutual Funds 29,306,540 5,440,344 (65,547)34,681,337 
Preferred Stock 1,141,458 40,533 (3,000)1,178,991 
Total $196,926,043 $10,562,267 $(367,837)$207,120,473 
        
        
Unrealized losses on investments as of March 31, 2018, are as follows:
Aggregate Unrealized Losses Aggregate Fair Value 
Less than one year $33,160 $21,895,327 
Greater than one year — — 
Total $33,160 $21,895,327 
Unrealized losses on investments as of December 31, 2017, are as follows: 
Aggregate Unrealized Losses Aggregate Fair Value 
Less than one year $263,655 $31,223,557 
Greater than one year 104,182 285,077 
Total $367,837 $31,508,634 

ASC 320, “Accounting for Certain Investments in Debt and Equity Securities”, as amended, provides guidance on determining when an investment is other than temporarily impaired. No investment losses were considered to be other than temporary during the periods presented. The Company has the intention and current ability to hold its debt investments until the amortized cost basis has been recovered.

Fixed income securities as of March 31, 2018 have contractual maturities as follows:
Due within one year $151,895,327 
Due between one and five years — 
Due over five years — 
$151,895,327 
11 
GENTEX CORPORATION AND SUBSIDIARIES
NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
Table of Contents



(5) Inventories
Inventories consisted of the following at the respective balance sheet dates:
March 31, 2018December 31, 2017
Raw materials $132,138,376 $139,272,129 
Work-in-process 31,124,313 30,481,192 
Finished goods 43,970,263 47,012,262 
Total Inventory $207,232,952 $216,765,583 


(6) Earnings Per Share

The following table reconciles the numerators and denominators used in the calculation of basic and diluted earnings per share (EPS):

Three Months Ended March 31, 
20182017
Numerators: 
Numerator for both basic and diluted EPS, net income $111,248,743 $97,556,741 
Denominators: 
Denominator for basic EPS, weighted-average shares outstanding 274,759,516 287,408,900 
Potentially dilutive shares resulting from stock plans 2,749,912 4,070,938 
Denominator for diluted EPS 277,509,428 291,479,838 
Shares related to stock plans not included in diluted average common shares outstanding because their effect would be anti-dilutive 156,467 2,311 

(7) Stock-Based Compensation Plans
As of March 31, 2018, the Company had four equity incentive plans which include two stock option plans, a restricted stock plan and an employee stock purchase plan. All plans and any prior material amendments thereto have previously been approved by shareholders. Readers should refer to Note 5 of our consolidated financial statements in our Annual Report on Form 10-K for the calendar year ended December 31, 2017, for additional information related to these stock-based compensation plans.
The Company recognized compensation expense for share-based payments of $3,901,316 for the three months ended March 31, 2018, and $3,484,240 for the three months ended March 31, 2017. Compensation cost for share based payment awards capitalized as part of inventory as of  March 31, 2018 and March 31, 2017 was $258,651 and $226,119, respectively.
Employee Stock Option Plan
The Company has an employee stock option plan covering 24,000,000 shares of common stock. The purpose of the plan is to provide an opportunity to use stock options as a means of recruiting new managerial and technical personnel and as a means for retaining certain employees of the Company and allow them to purchase shares of common stock of the Corporation and thereby have an additional incentive to contribute to the prosperity of the Company.  
The fair value of each option grant in the employee stock option plan was estimated on the date of grant using the Black-Scholes option pricing model with the following weighted-average assumptions for the indicated periods:
12
GENTEX CORPORATION AND SUBSIDIARIES
NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
Table of Contents
(7)  Stock-Based Compensation Plans (continued)
Three Months Ended March 31, 
20182017
Dividend Yield(1)
2.02 %2.18 %
Expected volatility(2)
23.26 %29.81 %
Risk-free interest rate(3)
2.56 %2.10 %
Expected term of options (years)(4)
4.194.09
Weighted-avg. grant date fair value $4.18 $4.51 
  1. Represents the Company’s estimated cash dividend yield over the expected term of option grant.
  2. Amount is determined based on analysis of historical price volatility of the Company’s common stock. The expected volatility is based on the daily percentage change in the price of the stock over a period equal to the expected term of the option grant.
  3. Represents the U.S. Treasury yield over the expected term of the option grant.
  4. Represents the period of time that options granted are expected to be outstanding. Based on analysis of historical option exercise activity, the Company has determined that all employee groups exhibit similar exercise and post-vesting termination behavior.

Under the employee stock option plan, the option exercise price equals the stock’s market price on date of grant. The options vest after one to five years, and expire after five to ten years. As of March 31, 2018, there was $10,686,587 of unrecognized compensation cost related to share-based payments which is expected to be recognized over the vesting periods.

Non-employee Director Stock Option Plan

The Company has a non-employee director stock option plan covering 1,000,000 shares of common stock. As of March 31, 2018, there was no unrecognized compensation cost under the non-employee director plan related to share-based payments. The Company has granted options on 427,000 shares under the non-employee director plan through March 31, 2018. Under the non-employee director plan, the option exercise price equals the stock’s market price on the date of grant. The options vest after six months, and expire after ten years.

Employee Stock Purchase Plan

The Company has an employee stock purchase plan covering 2,000,000 shares of common stock. Under the plan, the Company sells shares at 85% of the stock’s market price at date of purchase. Under ASC 718, the 15% discounted value is recognized as compensation expense. As of  March 31, 2018, the Company has granted 824,647 shares under this plan.

Restricted Stock Plan

The Company has a restricted stock plan covering 9,000,000 shares of common stock. The purpose of the restricted stock plan is to permit grants of shares, subject to restrictions, to employees of the Company as a means of retaining and rewarding them for performance and to increase their ownership in the Company. Shares awarded under the restricted stock plan entitle the shareholder to all rights of common stock ownership except that the shares may not be sold, transferred, pledged, exchanged or otherwise disposed of during the restriction period. The restriction period is determined by the Compensation Committee, appointed by the Board of Directors, but may not exceed ten years under the terms of the plan. As of March 31, 2018, the Company had unearned stock-based compensation of $27,760,004 associated with these restricted stock grants. The unearned stock-based compensation related to these grants is being amortized to compensation expense over the applicable restriction periods. Amortization expense from restricted stock grants in the three months ended March 31, 2018 and 2017 was $1,643,060 and $940,811, respectively.

(8) Comprehensive Income

Comprehensive income reflects the change in equity of a business enterprise during a period from transactions and other events and circumstances from non-owner sources. For the Company, comprehensive income represents net income adjusted for unrealized gains and losses on certain investments, foreign currency translation adjustments, and derivatives. 






13
GENTEX CORPORATION AND SUBSIDIARIES
NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
Table of Contents
(8)  Comprehensive Income (continued)


The following table presents the net changes in the Company's accumulated other comprehensive income (loss) by component: (All amounts shown are net of tax).
Three Months Ended March 31, 
2018 2017 
Foreign currency translation adjustments: 
Balance at beginning of period $645,030 $(2,862,999)
Other Comprehensive income before reclassifications
1,626,178 188,590 
Net current-period change 1,626,178 188,590 
Balance at end of period 2,271,208 (2,674,409)
Unrealized gains (losses) on available-for-sale debt securities: 
Balance at beginning of period (16,349)2,788,975 
Other Comprehensive income before reclassifications
548,506 1,575,383 
Amounts reclassified from accumulated other comprehensive income (565,317)(164,718)
Net current-period change (16,811)1,410,665 
Balance at end of period (33,160)4,199,640 
Unrealized gains (losses) on derivatives: 
Balance at beginning of period (78,026)(1,197,281)
Other comprehensive income before reclassifications 43,173 147,318 
Amounts reclassified from accumulated other comprehensive income 9,794 269,966 
Net current-period change 52,967 417,284 
Balance at end of period (25,059)(779,997)
Accumulated other comprehensive income, end of period
$2,212,989 $745,234 
 
The following table presents details of reclassifications out of accumulated other comprehensive income for the three months ended March 31, 2018 and 2017.

Details about Accumulated Other Comprehensive Income Components Amounts Reclassified from Other Comprehensive Income Affected Line item in the Statement of Consolidated Income 
Three Months Ended March 31, 
2018 2017 
Unrealized gains (losses) on available-for-sale securities 
Realized gain on sale of securities $715,591 $253,413 Other income (loss), net 
Provision for income taxes (150,274)(88,695)Provision for income taxes 
$565,317 $164,718 Net of tax 
Unrealized gains (losses) on derivatives 
Realized loss on interest rate swap $(12,398)$(415,333)Other income (loss), net 
Provision for income taxes 2,604 145,367 Provision for income taxes 
$(9,794)$(269,966)Net of tax 
Total net reclassifications for the period $555,523 $(105,248)Net of tax 

14
GENTEX CORPORATION AND SUBSIDIARIES
NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
 Table of Contents
(9) Debt and Financing Arrangements

On September 27, 2013, the Company entered into a Credit Agreement (“Credit Agreement”) with certain banks and agents.

Pursuant to the Credit Agreement, the Company is the borrower under a $150 million senior revolving credit facility (“Revolver”) and a $150 million term loan facility (“Term Loan”). Under the terms of the Credit Agreement, the Company is entitled, to further request an additional aggregate principal amount of up to $75 million, subject to the satisfaction of certain conditions. In addition, the Company is entitled to the benefit of swing loans from amounts otherwise available under the Revolver in the aggregate principal amount of up to $20 million and to request Letters of Credit from amounts otherwise available under the Revolver in the aggregate principle amount up to $20 million, both subject to certain conditions. The obligations of the Company under the Credit Agreement are not secured, but are subject to certain covenants. The Revolver expires and the Term Loan matures on September 27, 2018. 

During the three months ended March 31, 2018, the Company made principal repayments of $28.0 million, plus accrued interest, on the Term Loan and Revolver. The aforementioned payments include a payment made by the Company of $26.1 million on the Term Loan during the first quarter of 2018, which was in addition to scheduled amounts due. The Company used cash and cash equivalents to fund the payments. As of March 31, 2018, there was no outstanding balance on the Revolver. Under current terms of the Term Loan, the Company is required to make principal repayments of  $7.5 million annually. As of March 31, 2018, $50.0 million was outstanding under the Term Loan.

As of March 31, 2018, the borrowing rate on both its Term Loan and Revolver are derived from the one month LIBOR, and based on the Company's leverage ratio as of March 31, 2018 the interest rate on its borrowings is equal to 2.88%. Interest expense is netted within the "Other, net" section of the Condensed Consolidated Statements of Income, and interest expense associated with the Term Loan and Revolver was $0.5 million during the three months ended March 31, 2018, and $0.9 million during the three months ended March 31, 2017, respectively.

The Credit Agreement contains customary representations and warranties and certain covenants that place certain limitations on the Company.

As of  March 31, 2018, the Company was in compliance with its covenants under the Credit Agreement.


(10) Equity

The decrease in common stock during the three months ended March 31, 2018, was primarily due to the repurchases of 9.3 million shares, of which 3.8 million shares were acquired pursuant to the Company's previously announced share repurchase plan. In addition, 5.5 million shares were repurchased from the former CEO and subsequently retired, pursuant to his previously disclosed retirement agreement, at a price of $20.98 per share. As previously announced, these share repurchases were separately approved by the Company's Board of Directors and were not repurchased as part of the Company’s existing share repurchase plan.  The share repurchases in the first quarter of 2018 were partially offset by the issuance of 2.9 million shares of the Company’s common stock under the Company’s stock-based compensation plans. The total net decrease was 6.4 million shares. 

The Company announced a $0.01 per share increase in its quarterly cash dividend rate during the second quarter of 2017, and a further $0.01 per share increase during the first quarter of 2018. As such, the Company recorded a cash dividend of $0.11 during the first quarter of 2018 as compared to a cash dividend of $0.09 per share during the first quarter of 2017. The first quarter 2018 dividend of $30.1 million, was declared on March 9, 2018, and was paid on April 18, 2018.

(11) Contingencies
The Company is periodically involved in legal proceedings, legal actions and claims arising in the normal course of business, including proceedings relating to product liability, intellectual property, safety and health, employment and other matters. Such matters are subject to many uncertainties and outcomes are not predictable. The Company does not believe, however, that at the current time any of these matters constitute material pending legal proceedings that will have a material adverse effect on the financial position or future results of operations or cash flows of the Company.

15
GENTEX CORPORATION AND SUBSIDIARIES
NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
Table of Contents



(12) Segment Reporting

The Company's automotive segment develops and manufactures electro-optic products and electronics, including: automatic-dimming rearview mirrors with and without electronic features; non-auto dimming rearview mirrors with and without electronic features; and other electronics. The Company also develops and manufactures variably dimming windows for the aerospace industry and fire protection products for the commercial construction industry, which are combined into the "Other" segment shown below.

Three Months Ended March 31, 
20182017
Revenue: 
Automotive Products $454,965,374 $445,652,575 
Other 10,454,731 7,882,675 
Total $465,420,105 $453,535,250 
Income from operations: 
Automotive Products $124,962,159 $132,504,957 
Other 3,553,174 1,922,163 
Total $128,515,333 $134,427,120 

(13) Income Taxes

The effective tax rate was 15.6% in the three months ended March 31, 2018 compared to 27.7% for the same period in 2017. Generally, effective tax rates for these periods differ from statutory federal income tax rates, due to provisions for state and local income taxes, permanent tax differences, and the foreign-derived intangible income tax deduction during the three month period ended March 31, 2018. The decrease in the effective tax rate for the three months ended March 31, 2018 compared to the same period of 2017 was due to the reduction of the federal income tax rate from 35% to 21% as a result of the Tax Cuts and Jobs Act ("Act"), as well as R&D tax credits, discrete tax benefits related to equity compensation, and the foreign-derived intangible income tax deduction.

Pursuant to the guidance within SEC Staff Accounting Bulletin No. 118 (“SAB 118”), as the Company has continued to analyze certain aspects of the Act and refine its application to the Company. The Company has continued to recognize provisional effects of the Act for which measurement could be reasonably estimated. The ultimate impact of the Act may differ from these estimates due to its continued analysis or further regulatory guidance that may be issued pursuant to the Act. Under SAB 118, adjustments to the provisional amounts recorded by the Company as of March 31, 2018, that are identified within a subsequent measurement period of up to one year from the enactment date will be included as an adjustment to tax expense from continuing operations in the period the amounts are determined.


(14) Revenue

The Company adopted ASC 606 using the modified retrospective method as applied to customer contracts that were not completed as of January 1, 2018. As a result, financial information for reporting periods beginning after January 1, 2018 are presented under ASC 606, while comparative financial information has not been adjusted and continues to be reported in accordance with the Company’s historical accounting policy and then applicable guidance for revenue recognition prior to the adoption of ASC 606.

The following table shows the Company’s Automotive and Other Products revenue disaggregated by geographical location for Automotive Products for the period ended March 31, 2018:

16
GENTEX CORPORATION AND SUBSIDIARIES
NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
Table of Contents



Revenue Three Months Ended March 31, 2018 
Automotive Products 
U.S. 140,312,987 
Germany 91,793,541 
Japan 49,832,997 
Other 173,025,849 
Total Automotive Products 454,965,374 
Other Products (U.S.) 10,454,731 
Total Revenue 465,420,105 
Revenue by geographic area may fluctuate based on many factors, including exposure to local economic, political and labor conditions; unexpected changes in laws, regulations, trade or monetary or fiscal policy, including interest rates, foreign currency exchange rates and changes in the rate of inflation in the U.S. and other foreign countries; and tariffs, quotas, customs and other import or export restrictions and other trade barriers.

The following table disaggregates the Company’s Automotive and Other revenue by major source for the period ended March 31, 2018:

Revenue Three Months Ended March 31, 2018 
Automotive Segment 
Automotive Mirrors & Electronics 404,241,628 
HomeLink Modules* 50,723,746 
Total Automotive Products 454,965,374 
Other Segment 
Fire Protection Products 5,279,658 
Windows Products 5,175,073 
Total Other 10,454,731 
*Excludes HomeLink revenue related to HomeLink modules integrated into automotive mirrors 

Revenue is recognized when obligations under the terms of a contract with the customer are satisfied. Such recognition generally occurs with the transfer of control of the products at a point in time. OEM contracts generally include Long Term Supply Agreements ("LTSA") and Purchase Orders ("PO") whereby the LTSA sometimes stipulates the pricing and delivery terms and is evaluated together with a PO, which identifies the quantity, timing, and the type of product to be transferred. Certain customer contracts do not always have an LTSA, in which case, the contracts are governed by the PO from the customer in conjunction with other mutually agreed upon terms and conditions.

The Company does not generate revenue from arrangements with multiple deliverables. Revenue is measured as the amount of consideration the Company expects to receive in exchange for transferring goods and excludes from revenue amounts which are transferred to third parties, such as sales, value add, and other taxes the Company collects concurrently with revenue-producing activities. The Company does not incur any incremental cost to obtain contracts. Costs are incurred to fulfill contracts with the OEM. However, such costs are accounted for under ASC 340-10, and are not treated as fulfillment costs under ASC 340-40.




17
GENTEX CORPORATION AND SUBSIDIARIES
NOTES TO UNAUDITED CONDENSED CONSOLIDATED FINANCIAL STATEMENTS
(Unaudited)
Table of Contents



Automotive Products Segment

Automotive Rearview Mirrors and Electronics

The Company manufactures interior electrochromic automatic-dimming rearview mirrors that darken to reduce glare and improve visibility for the driver. These electronic interior mirrors can also include additional electronic features such as compass, microphones, HomeLink®, lighting assist and driver assist forward safety camera systems, various lighting systems, various telematics systems, ITM® systems, and a wide variety of displays. The Company also ships interior non-automatic-dimming rearview mirrors with features. The Company’s interior electrochromic automatic-dimming rearview mirrors also power the application of the Company’s exterior electrochromic automatic-dimming rearview mirrors that darken to reduce glare and improve visibility for the driver. These electronic exterior mirrors typically range in size and shape per automaker specification, but also include additional features such as turn signal indicators, side blind zone indicators, and courtesy lighting. The Company also ships exterior non-automatic-dimming rearview mirrors with similar electronic features as what is available in its automatic-dimming applications. The Company manufactures other automotive electronics products both inside and outside of the rearview mirror through HomeLink® applications in the vehicle including the rearview mirror, interior visor, overhead console, or center console.

For the majority of automotive products, transfer of control and revenue recognition occurs when the Company ships the product from the manufacturing facility to the customer. The Company receives cash equal to the invoice price for most automotive product sales at time of invoice. For any shipments of product that may be subject to retroactive price adjustments that are then being negotiated, the Company records revenue based on the Company’s best estimate of the amount of consideration to which the entity will be entitled in exchange for transferring the promised goods to the customer. The Company's approach is to consider these adjustments to the contract price as variable consideration which is estimated based on the then most likely price amount. Payment terms on automotive part sales to customers range from 15 days to 90 days. Estimated revenue is adjusted at the earlier of when the most likely amount of consideration expected to be received changes or when the consideration becomes fixed.

HomeLink® Modules

The Company manufactures and sells HomeLink® Modules individually, as well as in combination with the automotive mirrors and other advanced features, as described above. For the majority of automotive products, transfer of control and revenue recognition occurs when the Company ships the product from the manufacturing facility to the customer.

Other Segment

Dimmable Aircraft Windows

The Company supplies variable dimmable windows for the passenger compartment on the Boeing 787 Dreamliner Series of Aircraft. For dimmable aircraft windows, transfer of control and revenue recognition occurs when the Company ships the product from the manufacturing facility to the customer. Payment terms on dimmable aircraft window sales to customers range from 30 days to 45 days.

Fire Protection Products

The Company manufactures photoelectric smoke detectors and alarms, visual signaling alarms, electrochemical carbon monoxide detectors and alarms, audible and visual signaling alarms, and bells and speakers for use in fire detection systems in office buildings, hotels, and other commercial and residential buildings. For fire protection parts, transfer of control and revenue recognition occurs when the Company ships the product from the manufacturing facility to the customer. Payment terms on fire protection part sales to customers range from 30 days to 75 days. 

18
Table of Contents
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations.


RESULTS OF OPERATIONS:

FIRST QUARTER 2018 VERSUS FIRST QUARTER 2017
Net Sales. Net sales for the first quarter of 2018 increased by $11.9 million or 3% when compared with the first quarter of 2017.  
Automotive net sales for the first quarter of 2018 increased 2% to $455.0 million, compared with automotive net sales of $445.6 million in the first quarter of 2017, driven primarily by a 7% quarter over quarter increase in automotive mirror unit shipments. This increase in automotive mirror unit shipments in the first quarter of 2018 of 7% to 10.6 million units compared with the first quarter of 2017, was due to increased international shipments of the Company's interior and exterior auto-dimming mirrors, which were partially offset by lower quarter over quarter North American mirror unit shipments.
The below table represents the Company's auto-dimming mirror unit shipments for the three months ended March 31, 2018, and 2017 (in thousands).

Three Months Ended March 31, 
2018 2017 
% 
Change
North American Interior Mirrors 2,326 2,359 (1)%
North American Exterior Mirrors 818 916 (11)%
Total North American Mirror Units 3,143 3,276 (4)%
International Interior Mirrors 5,348 4,818 11 %
International Exterior Mirrors 2,112 1,826 16 %
Total International Mirror Units 7,459 6,643 12 %
Total Interior Mirrors 7,673 7,177 7 %
Total Exterior Mirrors 2,930 2,742 7 %
Total Auto-Dimming Mirror Units 10,603 9,919 7 %
Note: Percent change and amounts may not total due to rounding.
Other net sales were $10.4 million in the first quarter of 2018, an increase of 33%, compared to $7.9 million in the first quarter of 2017.  This was a result of fire protection sales of $5.3 million in the first quarter of 2018, increasing by 23% compared to $4.3 million of fire protection sales is the first quarter of 2017. Additionally, automatic dimmable windows increased to $5.2 million, an increase of $45%, in the first quarter of 2018 compared to the first quarter of 2017.

Cost of Goods Sold. As a percentage of net sales, cost of goods sold increased to 62.9% in the first quarter of 2018 versus 61.2% in the first quarter of 2017.  The quarter over quarter net decrease in the gross profit margin was primarily the result of the inability to leverage fixed overhead costs, resulting from the lower than forecasted industry production and sales growth as well as Full Display Mirror® shipments being lower than demand during the quarter due to a supplier production issue. Additionally, annual customer price reductions negatively impacted the gross margin because they were not fully offset by purchasing cost reductions. Annual customer price reductions and inability to leverage fixed overhead each had a negative impact of approximately 150 - 200 basis points, while purchasing cost reductions had a positive impact of approximately 50 - 100 basis points.
Operating Expenses. Engineering, research and development (E, R & D) expenses for the first quarter of 2018 increased 4% or $0.9 million when compared with the first quarter of 2017, primarily due to increased staffing levels and benefits, which continue to support growth and the development of new business and technology advances.
Selling, general and administrative (S, G & A) expenses increased by 11.4% or $1.8 million for the first quarter of 2018 compared to the first quarter of 2017. S, G & A expenses, notwithstanding the quarter over quarter increase, remained at approximately 4% of net sales in the first quarter of 2018 and in the first quarter of 2017. S, G, & A expenses increased on a dollar basis primarily due to increased staffing levels and travel.
19
Table of Contents
Total operating expenses were $44.1 million in the first quarter of 2018, which increased 7% or $2.7 million, from $41.4 million in the first quarter of 2017. 
Total Other Income. Total other income for the first quarter of 2018 increased by $2.8 million when compared with the first quarter of 2017, primarily due to increased interest, net of expense, foreign exchange gains, and an increase in realized gains on sales of equity investments during the first quarter of 2018 versus the same quarter in the prior year, as the Company sold all of its holdings in available-for-sale equity investments as part of its previously announced capital allocation strategy.
Provision for Income Taxes. The effective tax rate was 15.6% in the first quarter of 2018 compared to 27.7% for same quarter of 2017. Generally, effective tax rates for these periods differ from statutory federal income tax rates, due to provisions for state and local income taxes, permanent tax differences, and the foreign-derived intangible income tax deduction during the three month period ended March 31, 2018. The decrease in the effective tax rate for the first quarter of 2018 compared to the same period of 2017 was due to the reduction of the federal income tax rate from 35% to 21% as a result of the Tax Cuts and Jobs Act of 2017, as well as R&D tax credits and certain discrete tax benefits related to equity compensation.
Net Income. Net income for the first quarter of 2018 increased by $13.7 million or 14% when compared with the first quarter of 2017, primarily due to the decrease in tax expense, which was partially offset by decreases in gross profit margin and increases in operating expenses.

FINANCIAL CONDITION:
The Company's cash and cash equivalents as of March 31, 2018 was $524.3 million, which increased approximately $45.4 million compared to $569.7 million as of December 31, 2017. The decrease was primarily due to share repurchases, dividend payments, the accelerated repayment of debt, and capital expenditures, which was partially offset by the positive cash flows from operations and the sales proceeds from sales of investments during the three months ended March 31, 2018.
Short-term investments as of March 31, 2018 were $152.2 million, down from $152.5 million as of  December 31, 2017. Long-term investments were $3.2 million as of March 31, 2018, compared to $57.8 million as of December 31, 2017, as a result of sales of investments that occurred during the quarter, as the Company sold all of its holdings in available-for-sale equity investments as part of its previously announced capital allocation strategy.
Accounts receivable as of March 31, 2018 increased approximately $15.3 million compared to December 31, 2017, primarily due to the higher sales level, as well as timing of sales within the quarters.
Inventories as of March 31, 2018, increased approximately $9.5 million when compared to December 31, 2017, primarily due to decreases in raw materials and finished goods.
Accounts payable as of March 31, 2018 increased approximately $12.6 million when compared to December 31, 2017, primarily due to timing of payments and capital expenditures.
Accrued liabilities and current portion of long-term debt as of March 31, 2018 decreased approximately $2.9 million compared to December 31, 2017, primarily due to the Company's debt repayment of $28.0 million during the first quarter of 2018, which was partially offset by an increase in accrued income taxes.
Cash flow from operating activities for the three months ended March 31, 2018 increased $16.3 million to $147.4 million, compared with $131.2 million during the same three month period last year, primarily due to the increase in net income.
Capital expenditures for the three months ended March 31, 2018 were approximately $26.2 million, compared with approximately $27.1 million for the same three month period last year.
The Company believes its existing and planned facilities are currently suitable, adequate, and have the capacity required for current and near-term planned business. Nevertheless, the Company continues to evaluate longer term facilities needs. In the first quarter of 2018, as previously announced, the Company acquired a 25,000 square-foot, one-story building that was previously leased by the Company since 1978 as part of the former CEO's retirement agreement.
The Company estimates that it currently has building capacity to manufacture approximately 30 - 33 million interior mirror units annually and approximately 13 - 15 million exterior mirror units annually, based on current product mix. The Company evaluates equipment capacity on an ongoing basis and adds equipment as needed. 





20
Table of Contents
Management considers the current working capital, as well as the debt financing arrangement (notwithstanding its prohibitions on incurring additional indebtedness), discussed further in Note 9 to the Unaudited Condensed Consolidated Financial Statements, in addition to internally generated cash flow and credit worthiness, to be sufficient to cover anticipated cash needs for the foreseeable future considering its contractual obligations and commitments. The following is a summary of working capital and long-term investments:
March 31, 2018December 31, 2017
Working Capital $913,524,582 $940,916,816 
The decrease in working capital as of March 31, 2018 is primarily due to continued debt repayments and share repurchases made during the three month period ended March 31, 2018. 

The Company has a previously announced share repurchase plan under which the Board of Directors has authorized the repurchase of shares of the Company's common stock based on market conditions, the market price of the stock, anti-dilutive effect on earnings, available cash and other factors that the Company deems appropriate. During the three months ended March 31, 2018, the Company repurchased 9,331,499 shares, of which 5,499,728 shares were repurchased from the former CEO, pursuant to the previously disclosed retirement agreement. The shares repurchased from the former CEO were separately approved by the Company's Board of Director's and were not a part of the Company's existing publicly announced share repurchase plan. The company has 25,959,125 shares remaining under the plan as of March 31, 2018, as is further detailed in Part II, Item 2 of this Form 10-Q.

BUSINESS UPDATE

The Company's unit growth continues to out-pace vehicle production growth in large part due to the many different product launches that have been executed in 2017 and in the first quarter of 2018. The Company's unit and revenue growth continues to be driven by the Company's electrochromic technology, including a number of vehicles that are new launches, as well as certain other advanced features. As previously disclosed, during the first quarter of 2018, a supplier production issue for certain electronic components affected the Company's ability to meet demand for certain Full Display Mirrors® which resulted in a negative impact of approximately 2% in revenue during the quarter. Since the end of the first quarter of 2018, the supplier production issue has been remediated and normal shipments of the impacted products have resumed.
        
Interior and exterior auto-dimming mirrors and advanced electronic features were launched on a net new 10 vehicle models during the first quarter of 2018. The first quarter was highlighted by increased launch levels in HomeLink® and Full Display Mirror®.

Historically, the Company has been able to deliver higher than average margins when it has added electronic content faster than unit growth when combined with growth in unit penetration. On the other hand, when unit growth out-paces electronic content adoption, the Company typically has challenges when comparing margins on a period over period basis. During the first quarter of 2018, the Company experienced a 7% organic growth rate for interior mirror units and a 7% organic growth rate for exterior mirror units compared to the first quarter of 2017, driven by an increase of 12% in international auto-dimming mirror unit shipments. The underlying light vehicle production in both the European and Japan and Korea regions were down 2% quarter over quarter overall in these markets, which comprise the majority of the Company’s international shipments. The growth in international auto-dimming mirror unit shipments was partially offset by a quarter over quarter 4% decrease in North American auto-dimming mirror unit shipments which in part resulted from a 1% quarter over quarter decline in North American light vehicle production. As a result of the foregoing, gross and operating margins were impacted versus the same period last year.

PRODUCT UPDATE

The Full Display Mirror® began production in the fourth quarter of 2015. Current automotive design trends are yielding vehicles with small rear windows that are often further obstructed by headrests, passengers, and roof support pillars which can significantly hinder the mirror’s rearward view. The Company's Full Display Mirror® is an intelligent rear vision system that uses a custom, internally or externally mounted video camera and mirror-integrated video display to optimize a vehicle driver’s rearward view. This rear vision system consists of a hybrid Full Display Mirror® that offers bi-modal functionality. In mirror mode, the product functions as an auto-dimming rearview mirror which means that during nighttime driving, digital light sensors talk to one another via a microprocessor to automatically darken the mirror when glare is detected. With the flip of a switch, the mirror enters display mode, and a clear, bright display appears through the mirror’s reflective surface, providing a wide, unobstructed rearward view. The bi-modality of the Full Display Mirror® is essential, because in the event of any failure of the camera or display, the product is able to function as a standard mirror, which is a long-standing safety requirement in the automotive industry. In addition, the driver has the ability to switch between modes to accommodate usage preferences for various weather conditions, lighting conditions, and driving tasks.

21
Table of Contents
The Company continues to work on the development and launch of the Full Display Mirror® for six customers. As of the first quarter of 2018, the Company is shipping production Full Display Mirrors® to four OEMs, which are General Motors, Subaru, Toyota, and Nissan. During the first quarter of 2018, the Company announced that Jaguar Land Rover will be the first automaker to offer the Company’s next-generation FDM® which features an all-new frameless design with a larger, higher-resolution display. Jaguar Land Rover represents the fifth overall customer to launch with the Company's FDM® product and the first European customer to adopt the feature. Additionally during the first quarter of 2018, the Company announced it was sourced a Full Display Mirror® program with its sixth OEM customer. The Company continues to see interest from other automotive OEMs as well and is negotiating with other OEMs. The Company hopes the foregoing will cause certain other OEMs to consider adding the Full Display Mirror® into their product roadmap for future vehicles.

During the first quarter of 2017, the Company introduced a new three-camera rear vision system that streams rear video in multiple composite views to its Full Display Mirror®. The Company believes it is the industry’s first practical and comprehensive rear vision solution designed to meet automaker, driver, safety and regulatory requirements. The Company's rear vision system, known as a camera monitoring system ("CMS"), uses three cameras to provide a comprehensive view of the sides and rear of the vehicle. The side-view cameras are discretely housed in downsized, automatic-dimming exterior mirrors. Their video feeds are combined with that of a roof-mounted camera and stitched together into multiple composite views, which are streamed to the driver using the Full Display Mirror®. The system’s modular nature lets the automaker customize functionality while offering it as an affordable, optional feature all while enhancing safety by allowing the system to fail safe. Failures due to weather conditions or system failure that disrupt the digital view, allow drivers to use the interior and exterior mirrors. The system also supports user preference by permitting drivers to use standard mirror views, camera views, or both. Downsized exterior mirrors provide automakers with significant weight savings and fuel efficiency improvements. To further enhance safety, the Company's CMS solution can also work in conjunction with a vehicle’s side blind zone warning system. When a trailing vehicle enters a side blind zone, a warning indicator illuminates in both the interior and exterior mirrors while the corresponding side-view video feed appears in the display until the vehicle passes.

On March 31, 2014, the Alliance of Automobile Manufacturers petitioned NHTSA to allow automakers to use cameras as an option to replace conventional rearview mirrors within the United States, however, no final rule or legislation was made in response to this petition. At the annual SAE Government-Industry Meeting in January 2017, NHTSA requested that SAE develop Recommended Procedures for test protocols and performance criteria for CMS that would replace mirror systems on light vehicles in the U.S. market. SAE assigned the task to the Driver Vision Committee, and the SAE Driver Vision Committee created a CMS Task Force to draft the Recommended Procedures. In the second half of 2017, NHTSA published its Fiscal Year 2018 Budget Estimate that references rear visibility as an area for deregulation consideration. The Unified Agenda of Regulatory and Deregulatory Actions, published by the Trump Administration after the NHTSA Fiscal Year 2018 Budget Estimate, does not reference rule making for new or changed requirements of the rear visibility standard.

In July 2016, a revision to UN-ECE Regulation 46 was published with an effective date of June 18, 2016, which allows for camera monitor systems to replace mirrors in Japan and European countries. As of January 2017, camera monitoring systems are also permitted as an alternative to replace mirrors in the Korean market. Notwithstanding the foregoing, the Company continues to believe rearview mirrors provide a robust, simple and cost effective means to view the surrounding areas of a vehicle and remain the primary safety function for rear vision today. Cameras when used as the primary rear vision delivery mechanism have some inherent limitations such as: electrical failure; cameras being blocked or obstructed; depth perception challenges; and viewing angles of the camera. Nonetheless, the Company continues designing and manufacturing not only rearview mirrors, but CMOS imagers and video displays as well. The Company believes that combining video displays with mirrors may well provide a more robust product by addressing all driving conditions in a single solution that can be controlled by the driver. As noted, the Company has launched a rear vision camera system that streams rear video to a rearview-mirror-integrated display using the Company's Full Display Mirror®. The Company's CMS solution uses three cameras to provide a comprehensive view of the sides and rear of the vehicle. The Company also continues to develop in the areas of imager performance, camera dynamic range, lens design, image processing from the camera to the display, and camera lens cleaning. The Company acknowledges that as such technology evolves over time, such as cameras replacing mirrors and/or autonomous driving, there could be increased competition.

The Company's HomeLink® products are the auto industry's most widely used and trusted car-to-home communication system system, with an estimated 50 million units on the road. The system consists of two or three in-vehicle buttons that can be programmed to operate garage doors, security gates, home lighting, and other radio-frequency-controlled devices. During the first quarter of 2017, the Company demonstrated the next generation of HomeLink®, which uses both RF and wireless cloud-based connectivity to deliver complete vehicle-to-home automation. With the next-generation HomeLink®, a HomeLink® button press communicates with the HomeLink® app on the user’s smartphone via Bluetooth Low Energy. The app contains pre-defined, user-programmed actions, from single device operations to entire home automation scenes. The app, in turn, communicates to the home’s smart hub over the cloud server network and
22
Table of Contents
activates the appropriate devices, including security systems, door locks, thermostats, lighting, and other home automation devices, providing comprehensive vehicle-to-home automation. The ability to prepare the home for arrival or departure can occur with one button press. For the automaker, it allows them to offer a customizable yet proven solution without the engineering effort or security concerns associated with integrating the software into the vehicle’s computer network. The Company also continues to work on providing HomeLink® applications for alternative automobile and vehicle types which include but are not limited to motorcycles, mopeds, snowmobiles, tractors, combines, lawn mowers, loaders, bulldozers, road-graders, backhoes and golf carts. The Company further continues to work with compatibility partners for HomeLink® applications in new markets like China. The unique attributes of the China market allow for potential new use cases of these products and offer what the Company believes to be a real opportunity for growth of the HomeLink® brand and products. In 2017, the Company began its first volume production shipments of HomeLink® units on vehicles for the China market.

In January 2016, the Company announced a partnership with TransCore to provide automobile manufacturers with a vehicle-integrated tolling solution that enables motorists to drive on all U.S. toll roads without a traditional toll tag on the windshield. Currently more than 75 percent of new car registrations are in states with toll roads with over 50 million drivers accessing these roads each year. The Company signed an exclusive agreement, in the ordinary course of business, to integrate TransCore's toll module technology into the Company's rearview mirrors. In January 2017, the Company signed an extension of its agreement in the ordinary course of business, which enables the Company to offer the Integrated Toll Module system in Canada and Mexico. The interior mirror is the optimal location for a vehicle-integrated toll transponder and it eliminates the need to affix multiple toll tags to the windshield and helps automakers seamlessly integrate toll collection into the car. Since the Integrated Toll Module® or ITM® enables travel across almost all United States toll roads, and others in North America, motorists would no longer need multiple toll tags for different regions of the country or to manage multiple toll accounts. The Company's vehicle-integrated solution simplifies and expedites local, regional, and national travel. ITM® provides transportation agencies with an interoperability solution without costly infrastructure changes to the thousands of miles of toll lanes throughout the country. The Company believes that this product could potentially represent another growth opportunity over the next several years. The Company has its first OEM award of ITM® with Audi. Production deliveries are currently anticipated for end of calendar year 2018, which may vary based on automaker vehicle launch timing.

During the first quarter of 2017, the Company has announced an embedded biometric solution for vehicles that leverages iris scanning technology to create a secure environment in the vehicle. There are many use cases for authentication, which range from vehicle security to start functionality to personalization of mirrors, music, seat location and temperature, to the ability to control transactions not only for the ITM® system, but also the ride sharing car of the future. The Company believes iris recognition is among the most secure forms of biometric identification, with a false acceptance rate as low as one in 10 million, far superior to facial, voice, and other biometric systems. The Company's future plans include integrating biometric authentication with HomeLink® and HomeLink ConnectTM. The biometric system will allow HomeLink® to provide added security and convenience for multiple drivers by activating the unique home automation presets of different authorized users. The Company announced in January 2018 that it completed an exclusive licensing agreement, in the ordinary course of business, with Fingerprint Cards AB to deploy its ActiveIRIS® iris-scanning biometric technology in automotive applications.

In January 2018, the Company also announced that an agreement had been signed, in the ordinary course of business, to participate in a round of financing with Yonomi, the Company's partner in home automation technology. The Company is working with Yonomi as a home automation aggregation partner and the Company has developed an app and cloud infrastructure called HomeLink ConnectTM. HomeLink ConnectTM is an all new home automation app that pairs with the vehicle and allows drivers to operate home automation devices from the vehicle's center console display. Drivers of HomeLink ConnectTM compatible vehicles will be able to download and configure the app to control many available home automation devices and create entire home automation settings. The Company also announced that Jaguar Land Rover will be the first OEM to deploy this new technology on their vehicles.

SmartBeam® is the Company's proprietary high beam control system integrated into its auto-dimming mirror. SmartBeam® Generation 4, which was developed using the fourth generation of the Company's custom designed CMOS imager, has an advanced feature set made possible by the high dynamic range of the imager including: high beam assist; dynamic forward lighting with high beams constantly on; LED matrix beam; and a variety of specific detection applications including tunnel, fog and road type as well as certain lane tracking features to assist with lighting control. The Company has the ability to package the control electronics inside of its interior rearview mirrors with a self-calibrating camera attached to the mirror mount with optimal mechanical packaging which also provides for ease of service. In addition, the Company has long been integrating its camera products to optimize performance by fusing with other systems on the vehicle, including radar, navigation, steering and related modules provided by other suppliers. This enables the Company to provide its customers with a highly customizable solution that meets their unique needs and specifications.

On December 8, 2015 the National Highway Traffic Safety Administration (NHTSA) proposed changes to the NHTSA's 5-Star Safety Ratings for new vehicles (also known as the New Car Assessment Program or
23
Table of Contents
NCAP) and initiated a comment period.  The proposed changes will, for the first time, encompass assessment of crash-avoidance technologies, which includes lower beam headlamp performance, semi-automatic headlamp switching, and blind spot detection.  NHTSA initially intended to implement the enhancements in NCAP in 2018 beginning with model year 2019 vehicles.   In January 2017, NHTSA published a notice on SafeCar.gov stating the new goal for implementation was calendar year 2019 for model year 2020. The notice has, however, been removed from the aforementioned website after the January 20, 2017 Regulatory Freeze Pending Review Memorandum from the Trump Administration. In addition, the aforementioned NHTSA Fiscal Year 2018 Budget Estimate allocated a portion of the budget for NCAP, including the possibility of a new comment period and that NHTSA will consider modernizing portions of the lighting standard to permit innovation in the area of adaptive driving-beam headlights. The Company believes that its SmartBeam® technology will qualify with the semi-automatic headlamp NCAP rating system, and that its SmartBeam® technology and exterior mirrors with blind spot alert lighting can be included in a system that qualifies with the lower beam headlamp performance and blind spot detection NCAP rating system, respectively.

In 2014, the NHTSA issued a final rule requiring rearview video systems in U.S. light vehicles by May 1, 2018, with a phase-in schedule requirement of 10% of vehicles after May 2016, 40% of vehicles after May 2017, and 100% of vehicles after May 2018. In this release, NHTSA estimated that 57% of model year 2014 vehicles already have a rear video system, and that even without a final rule, 73% of the vehicles sold into North America would have already included a rearview video system by 2018. This NHTSA rule, as is indicated from the percentage of U.S. vehicles already having a solution, does not currently indicate an immediate opportunity for new Rear Camera Display (RCD) mirror applications for the Company. Customer opportunities for RCD mirror applications may exist by the time the 100% requirement is in place, but there is no certainty that is the case at this time. The Company’s RCD mirror application meets all the technical requirements of the NHTSA rule when installed in a vehicle and appropriately paired with an OEM specified camera. The NHTSA rule that rearview video systems are required has increased competition for systems capable of rear video in a variety of locations in the vehicle. The Company's RCD mirror application has and will continue to be affected by this increased competition.


OTHER

Automotive revenues represent approximately 98% of the Company's total revenue, consisting of interior and exterior electrochromic automatic-dimming rearview mirrors and automotive electronics.

The Company does continue to experience pricing pressure from its automotive customers and competitors, which will continue to cause downward pressure on its sales and profit margins. The Company works continuously to offset these price reductions with engineering and purchasing cost reductions, productivity improvements, and increases in unit sales volume, but there is no assurance the Company will be able to do so in the future.

Because the Company sells its products throughout the world, and automotive manufacturing is highly dependent on economic conditions, the Company can be affected by uncertain economic conditions that can reduce demand for its products.

The Company previously announced that it is providing variably dimmable windows for the Boeing 787 Dreamliner series of aircraft. The Company continues to work with aircraft manufacturers that have an interest in this technology regarding potential additional programs.

The Company believes that its patents and trade secrets provide it with a competitive advantage in automotive rearview mirrors and other electronic features that it offers in vehicles and aerospace windows. Claims of patent infringement can be costly and time-consuming to address. To that end, the Company obtains intellectual property rights in the ordinary course of business to strengthen its intellectual property portfolio and to minimize the risk of infringement.

The Company does not have any significant off-balance sheet arrangements or commitments that have not been recorded in its consolidated financial statements.



24
Table of Contents
OUTLOOK
The Company utilizes the light vehicle production forecasting services of IHS Worldwide, and using the April 2018 light vehicle production forecasts indicated in the table below, the Company has provided certain guidance for calendar year 2018.
Light Vehicle Production (per IHS Automotive April light vehicle production forecast) 
(in Millions) 
Region 2Q 2018 2Q 2017 % Change Calendar Year 2018 Calendar Year 2017 % Change 
North America 4.50 4.57 (2)%17.33 17.26 — %
Europe 5.81 6.03 (4)%22.83 22.78 — %
Japan and Korea 3.17 3.16 — %12.93 12.91 — %
Total Light Vehicle Production 13.48 13.76 (2)%53.09 52.95 — %
The Company continues to estimate that top line revenue for calendar year 2018 will be between $1.89 and $1.97 billion. All estimates are based on light vehicle production forecasts in the regions to which the Company ships product, as well as the estimated option rates for its mirrors on prospective vehicle models and anticipated product mix. 
The Company continues to see order rates and booked business that allow for these estimates despite relatively modest vehicle production increases (and in some measures even decreases) in its primary markets. Nevertheless, ongoing uncertainties remain including: light vehicle production levels; automotive plant shutdowns; supplier part shortages; sales rates in Europe, Asia and North America; OEM strategies and cost pressures; customer inventory management and the impact of potential automotive customer (including their Tier 1 suppliers) and supplier bankruptcies; work stoppages, strikes, etc., all of which could disrupt shipments to these customers and make forecasting difficult. 
Based on actual results for the first quarter, currently forecasted sales and product mix, the Company continues to estimate that the gross profit margin will be between 38.0% and 39.0% for calendar year 2018.
The Company also continues to estimate that its operating expenses, which include engineering, research and development expenses and selling, general and administrative expenses are expected to be approximately $180 - $190 million for calendar year 2018, primarily due to staffing related costs, professional fees and travel expenses, which continue to support growth and the development of new business, technology advances and support for new income tax legislation passed in 2017. The Company also plans to continue to invest in selling and marketing efforts at a rate of growth that approximates the rate of sales growth for the Company.
In light of on-going demand for the Company's auto-dimming mirrors and electronics, the Company currently continues to anticipate that 2018 capital expenditures will be approximately $115 - $130 million. Capital expenditures in the calendar year 2018 are currently anticipated to be financed from current cash and cash equivalents on hand and cash flows from operating activities.
The Company continues to estimate that depreciation and amortization expense for calendar year 2018 will be approximately $105 - $115 million.
After further analysis and refinement, the Company is lowering its estimated effective annual tax rate for calendar year 2018 from the previous guidance in the range of 18.0% to 21.0% to a range of 15.0% to 18.0%. This is primarily as a result of further detailed analysis of components of legislation related to the Tax Cuts and Jobs Act of 2017, R&D tax credits, as well as discrete tax benefits related to equity compensation.
The Company also intends to continue to repurchase additional shares of its common stock in 2018 and into the future depending on a number of factors, including: market, economic, and industry conditions; the market price of the Company's common stock; anti-dilutive effect on earnings; available cash; and other factors that the Company deems appropriate, commensurate with its previously announced capital allocation strategy.
Finally, based on 2018 light vehicle production forecasts and current forecasted product mix, the Company is making no changes to its previously announced revenue estimates for calendar year 2019, which continues to be estimated to be over and above the foregoing 2018 revenue estimates in the range of 5% to 10%. 
25
Table of Contents
        CRITICAL ACCOUNTING POLICIES:
The preparation of the Company’s consolidated condensed financial statements contained in this report, which have been prepared in accordance with accounting principles generally accepted in the United States, requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. On an ongoing basis, management evaluates these estimates. Estimates are based on historical experience and/or on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that may not be readily apparent from other sources. Historically, actual results have not been materially different from the Company’s estimates. However, actual results may differ from these estimates under different assumptions or conditions.

The Company has identified critical accounting policies used in determining estimates and assumptions in the amounts reported in its Management’s Discussion and Analysis of Financial Condition and Results of Operations in its Annual Report on Form 10-K for the fiscal year ended December 31, 2017.

Item 3.  Quantitative And Qualitative Disclosures About Market Risk.

The Company is subject to market risk exposures of varying correlations and volatilities, including foreign exchange rate risk, interest rate risk, and equity price risk. Historically, volatile equity markets could negatively impact the Company's financial performance due to realized losses on the sale of equity investments and/or recognized losses due to other-than-temporary impairment adjustment on available for sale securities (mark-to-market adjustments). During the quarter ended March 31, 2018, other than the Company's sale of all holdings of available for sale equity investments (as part of its previously announced capital allocation strategy), there are no material changes in the risk factors previously disclosed in the Company's report on Form 10-K for the fiscal year ended December 31, 2017, except as set forth in Item 2.

The Company has some assets, liabilities and operations outside the United States, including euro-denominated accounts, which currently are not significant overall to the Company as a whole. Because the Company sells its automotive mirrors throughout the world, and automotive manufacturing is highly dependent on general economic conditions, the Company could be affected by uncertain economic conditions in foreign markets that can reduce demand for its products.


Item 4.  Controls And Procedures.

Evaluation of Disclosure Controls and Procedures.  

Under the supervision of, and with the participation of management, the Company's Chief Executive Officer and Chief Financial Officer have evaluated the effectiveness of the Company's disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) as of March 31, 2018, and have concluded that as of that date, the Company's disclosure controls and procedures are effective.

Changes in Internal Control Over Financial Reporting

There were no changes in the Company's internal control over financial reporting (as defined in Exchange Act Rules 13a-15(f) and 15d-15(f)) during the quarter ended March 31, 2018 that materially affected, or are reasonably likely to materially affect, the Company's internal control over financial reporting.

SAFE HARBOR STATEMENT:

This Quarterly Report contains forward-looking statements within the meaning of the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. The statements contained in this communication that are not purely historical are forward-looking statements. Forward-looking statements give the Company’s current expectations or forecasts of future events. These forward-looking statements generally can be identified by the use of words such as “anticipate”, “believe”, “could”, “estimate”, “expect”, “forecast”, “goal”, “hope”, “may”, “plan”, “project”, “will”, and variations of such words and similar expressions. Such statements are subject to risks and uncertainties that are often difficult to predict and beyond the Company’s control, and could cause the Company’s results to differ materially from those described. These risks and uncertainties include, without limitation: changes in general industry or regional market conditions; changes in consumer and customer preferences for our products (such as cameras replacing mirrors and/or autonomous driving); our ability to be awarded new business; continued uncertainty in pricing negotiations with customers; loss of business from increased competition; changes in strategic relationships; customer bankruptcies or divestiture of customer brands; fluctuation in vehicle production schedules; changes in product mix; raw material shortages; higher raw material, fuel, energy and other costs; unfavorable fluctuations in currencies or interest rates in the regions in which we operate; costs or difficulties related to the integration and/or ability to maximize the value of any new or acquired technologies and businesses; changes in regulatory conditions; warranty and recall claims and other litigation and customer reactions
26
Table of Contents
thereto; possible adverse results of pending or future litigation or infringement claims; changes in tax laws; import and export duty and tariff rates in or with the countries with which we conduct business; and negative impact of any governmental investigations and associated litigations including securities litigations relating to the conduct of our business. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date they are made. The Company undertakes no obligation to publicly update or revise any forward-looking statement, whether as a result of new information, future events or otherwise, except as required by law or the rules of the NASDAQ Global Select Market.
27
Table of Contents
PART II—OTHER INFORMATION

Item 1A. Risk Factors.
Information regarding risk factors appears in Management’s Discussion and Analysis of Financial Condition and Results of Operations in Part I – Item 2 of this Form 10-Q and in Part I – Item 1A – Risk Factors of the Company’s report on Form 10-K for the fiscal year ended December 31, 2017. There have been no material changes from the risk factors previously disclosed in the Company’s report on Form 10-K for the year ended December 31, 2017, except to the extent described in Part I – Item 2 of this Form 10-Q.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds.

(c) Issuer Purchase of Equity Securities

On October 8, 2002, the Company announced a share repurchase plan, under which it may purchase up to 16,000,000 shares (post-split) based on a number of factors. On July 20, 2005, the Company announced that it had raised the price at which the Company may repurchase shares under the existing plan. On May 16, 2006, the Company announced that the Company's Board of Directors had authorized the repurchase of an additional 16,000,000 shares (post-split) under the plan. On August 14, 2006, the Company announced that the Company's Board of Directors had authorized the repurchase of an additional 16,000,000 shares (post -split) under the plan. On February 26, 2008, the Company announced that the Company's Board of Directors had authorized the repurchase of an additional 8,000,000 shares (post-split) under the plan. On October 23, 2012, the Company announced that the Company's Board of Directors had authorized the repurchase of an additional 8,000,000 shares (post - split) under the plan. On October 21, 2015, the Company announced that the Company's Board of Directors had authorized the repurchase of an additional 5,000,000 shares (post - split) under the plan. On February 23, 2016, the Company's Board of Directors authorized the repurchase of an additional 5,000,000 shares (post-split) under the plan. On October 20, 2016, the Company announced that the Company's Board of Directors had authorized the repurchase of an additional 7,500,000 shares (post - split) under the plan. On August 23, 2017, the Company announced that the Company's Board of Directors had authorized the repurchase of an additional 15,000,000 shares (post - split) under the plan. On January 16, 2018, the Company repurchased approximately 5.5 million shares of common stock from the former CEO pursuant to his retirement agreement, as previously announced. These share repurchases were approved by the Company's Board of Directors and were not repurchased as part of the Company's existing share repurchase plan. On March 9, 2018, the Company announced that the Company's Board of Directors had authorized the repurchase of an additional 20,000,000 shares (post - split) under the plan. The Company may purchase authorized shares of its common stock under the plan based on a number of factors, including: market, economic, and industry conditions; the market price of the Company's common stock; anti-dilutive effect on earnings; available cash; and other factors that the Company deems appropriate. The plan does not have an expiration date, but the Board of Directors reviews such plan periodically. 

The following is a summary of share repurchase activity during the three months ended March 31, 2018:
Issuer Purchase of Equity Securities 
Period Total Number of Shares Purchased Average Price Paid Per Share Total Number of Shares Purchase As Part of a Publicly Announced Plan or Program* Maximum Number of Shares That May Yet Be Purchased Under the Plan or Program* 
January 2018 6,649,731 21.33 6,649,731 8,640,893 
February 2018 1,944,826 22.60 1,944,826 6,696,067 
March 2018 736,942 22.81 736,942 25,959,125 
1st Quarter 2018 Total 9,331,499 21.71 9,331,499 
2018 Total 9,331,499 21.71 9,331,499 25,959,125 
*See above and below for additional plan or program details.
As of March 31, 2018 the Company has repurchased 96,040,603 shares at a total cost of $1,153,156,716 under the plan or otherwise. The following is a summary of quarterly share repurchase activity under the plan to date (adjusted for 2 for 1 stock splits each effected in the form of a 100% stock dividend issued effective May 6, 2005 and December 31, 2014, respectively):
28
Table of Contents
Quarter Ended 
Total Number of Shares 
Purchased All as Part of a Publicly Announced Plan
(Post - Split)
Cost of Shares 
Purchased
March 31, 20031,660,000 $10,246,810 
September 30, 20052,992,118 25,214,573 
March 31, 20065,607,096 47,145,310 
June 30, 200614,402,162 104,604,414 
September 30, 20067,936,342 55,614,102 
December 31, 20062,465,768 19,487,427 
March 31, 2007895,420 7,328,015 
March 31, 20084,401,504 34,619,490 
June 30, 20082,407,120 19,043,775 
September 30, 20085,038,306 39,689,410 
December 31, 20084,250,506 17,907,128 
September 30, 20123,943,658 33,716,725 
September 30, 2014703,130 9,999,957 
December 31, 20141,094,350 20,010,925 
March 31, 20151,406,595 25,049,145 
June 30, 20151,427,469 25,058,050 
September 30, 20152,051,013 32,793,258 
December 31, 20151,765,496 28,328,372 
March 31, 20163,124,053 44,585,668 
June 30, 20163,080,993 47,689,204 
September 30, 20161,836,312 30,466,752 
December 31, 20162,264,769 40,622,598 
March 31, 20171,473,403 30,986,386 
June 30, 20172,181,875 42,570,501 
September 30, 20173,213,146 56,270,779 
December 31, 20175,086,500 101,535,549 
March 31, 20189,331,499 $202,572,393 
Totals 96,040,603 $1,153,156,716 



Item 6. Exhibits.

See Exhibit Index on Page

29
Table of Contents
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
 
GENTEX CORPORATION 
Date: May 4, 2018 /s/ Steven R. Downing 
Steven R. Downing 
President and Chief Executive Officer  
(Principal Executive Officer) on behalf of Gentex Corporation 
Date: May 4, 2018 /s/ Kevin C. Nash 
Kevin C. Nash 
Vice President, Finance, Chief Financial Officer and Treasurer 
(Principal Financial Officer and Principal Accounting Officer) on behalf of Gentex Corporation 

30
Table of Contents
EXHIBIT INDEX
 
Exhibit No. Description 
31.1 
31.2 
32 
101.INS XBRL Instance Document - the instance document does not appear in the Interactive Data File because its XBRL tags are embedded within the Inline XBRL document 
101.SCH XBRL Taxonomy Extension Schema 
101.CAL XBRL Taxonomy Extension Calculation Linkbase 
101.DEF XBRL Taxonomy Extension Definition Linkbase 
101.LAB XBRL Taxonomy Extension Label Linkbase 
101.PRE XBRL Taxonomy Extension Presentation Linkbase 



31