GEOSPACE TECHNOLOGIES CORP - Annual Report: 2017 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

OR

Commission file number 001-13601

GEOSPACE TECHNOLOGIES CORPORATION

(Exact Name of Registrant as Specified in Its Charter)

7007 Pinemont Drive

Houston, Texas 77040-6601

(Address of Principal Executive Offices)

(713) 986-4444

(Registrant’s telephone number, including area code)

Securities Registered pursuant to Section 12(b) of the Act:

Securities Registered pursuant to Section 12(g) of the Act:NONE

Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.     Yes  ☐    No  ☒

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.     Yes ☐    No  ☒

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.     Yes ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit and post such files).     Yes ☒    No  ☐

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405) is not contained herein, and will not be contained, to the best of the Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ☒

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company.  See definitions of “large accelerated filer”, “accelerated filer”, “smaller reporting company”, and “emerging growth company” in Rule 12b-2 of the Exchange Act.  

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).     Yes  ☐    No  ☒

There were 13,438,316 shares of the Registrant’s Common Stock outstanding as of the close of business on October 31, 2017.  As of March 31, 2017, the aggregate market value of the Registrant’s Common Stock held by non-affiliates was approximately $211 million (based upon the closing price of $16.23 on March 31, 2017, as reported by The NASDAQ Global Market).  

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the definitive proxy statement for the Registrant’s 2018 Annual Meeting of Stockholders are incorporated by reference into Part III of this report.  

EXPLANATORY NOTE – RESTATEMENT OF FINANCIAL INFORMATION

On November 16, 2017, the Audit Committee of the Board of Directors (“the Audit Committee”) of Geospace Technologies Corporation (the “Company”) on the recommendation of management, and after consultation with the Company’s independent registered public accounting firm, BDO USA, LLP, concluded that the Company’s audited consolidated financial statements for the fiscal years ended September 30, 2016 and 2015, and the related reports of the Company’s independent registered accounting firm thereon, and the unaudited consolidated financial statements for quarters ended December 31, 2016, March 31, 2017 and June 30, 2017 (“Restated Periods”) should no longer be relied upon because of an accounting error.

This Annual Report on Form 10-K for the fiscal year ended September 30, 2017 includes (i) audited restated consolidated balance sheets as of September 30, 2016 and 2015, (ii) unaudited restated condensed consolidated balance sheets as of December 31, 2016, March 31, 2017 and June 30, 2017 and (iii) footnotes reconciling previously final annual and quarterly consolidated balance sheets to the restated balance sheets, which we refer to as the restatement.

We have determined that a portion of our inventories at September 30, 2016 and 2015 should have been classified as non-current assets, as all inventories were not reasonably expected to be realized in cash, sold or consumed during our next operating cycle.  This error has been identified and corrected in the restated consolidated balance sheets as of September 30, 2016 and 2015 and as of December 31, 2016, March 31, 2017 and June 30, 2017 in this Annual Report on Form 10-K.  The effects of this restatement consist of a non-cash reclassification with respect to inventories. The restatement did not affect previously reported total assets, total liabilities, revenues, net loss, loss per share, or cash flows. For discussions of the restatement adjustments, see Item 1A. “Risk Factors” and Item 8, “Financial Statements and Supplementary Data”, including Notes 21 and 22 of the notes to the Consolidated Financial Statements.

Additionally, in connection with the errors noted above, our management, including the CEO and CFO, has identified a material weakness in the Company’s internal control over financial reporting as of September 30, 2017 and 2016 and has been engaged in a focused review of its financial reporting practices and remediation of the related control weakness.  For a discussion of our controls and procedures, the material weakness identified and our actions to remediate such weakness see Item 9A, “Controls and Procedures” in Part II of this Annual Report on Form 10-K,

We believe that presenting all of this information regarding the Restated Periods in this Annual Report allows investors to review all pertinent data in a single presentation.  We do not therefore plan to amend our previously filed Annual Report on Form 10-K the fiscal year ended September 30, 2016 and Forms 10-Q for the quarterly periods ended December 31, 2016, March 31, 2017 and June 30, 2017 in connection with the restatement.  The financial information that has been previously filed or otherwise reported for the Restated Periods is superseded by the information in this Annual Report on Form 10-K.  Unless otherwise stated, all financial information contained in this Annual Report on Form 10-K for periods prior to September 30, 2017 are presented on a restated basis.

PART I

Item 1. Business

Business Overview

Geospace Technologies Corporation reincorporated as a Texas corporation on April 16, 2015.  We originally incorporated as a Delaware corporation on September 27, 1994.  Unless otherwise specified, the discussion in this Annual Report on Form 10-K refers to Geospace Technologies Corporation and its subsidiaries.  We design and manufacture instruments and equipment used in the oil and gas industry to acquire seismic data in order to locate, characterize and monitor hydrocarbon producing reservoirs.  We also design and manufacture non-seismic products, including industrial products, offshore cables and imaging equipment.  We report and categorize our customers and products into two different segments: Seismic and Non-Seismic.

We have engaged in the seismic instrument and equipment business since 1980 and market our products primarily to the oil and gas industry.  Demand for our products has been, and will likely continue to be, vulnerable to downturns in the economy and the oil and gas industry in general.  For more information, please refer to the risks discussed under the heading “Risk Factors.”

Products and Product Development

Seismic Products

Our seismic business segment has historically accounted for the majority of our revenue.  Geoscientists use seismic data primarily in connection with the exploration, development and production of oil and gas reserves to map potential and known hydrocarbon bearing formations and the geologic structures that surround them.  Our seismic product lines currently consist of land and marine nodal data acquisition systems, permanent land and seabed reservoir monitoring products and services, geophones and geophone strings, hydrophones, leader wire, connectors, telemetry cables, marine streamer retrieval and steering devices and various other products.  Our seismic products are compatible with most major competitive seismic data acquisition systems currently in use.  We believe that our seismic products are among the most technologically advanced instruments and equipment available for seismic data acquisition.

Traditional Products

An energy source and a data recording system are combined to acquire seismic data.  We provide many of the components of seismic data recording systems, including geophones, hydrophones, multi-component sensors, leader wire, geophone strings, connectors, seismic telemetry cables and other seismic related products.  On land, our customers use geophones, leader wire, cables and connectors to receive and measure seismic reflections resulting from an energy source into data recording units, which store the seismic information for subsequent processing and analysis.  In the marine environment, large ocean-going vessels tow long seismic cables known as “streamers” containing hydrophones which are used to detect pressure changes.  Hydrophones transmit electrical impulses back to the vessel’s data recording unit where the seismic data is stored for subsequent processing and analysis.  Our marine seismic products also help steer streamers while being towed and help recover streamers if they become disconnected from the vessel.

Our seismic sensor, cable and connector products are compatible with most major competitive seismic data acquisition systems currently in use.  Revenue from these products results primarily from seismic contractors purchasing our products as components of new seismic data acquisition systems or to repair and replace components of seismic data acquisition systems already in use.

Our products used in marine seismic data acquisition include our seismic streamer retrieval devices (“SRDs”).  Occasionally, streamer cables are severed and become disconnected from the vessel as a result of obstacles, inclement weather, vessel traffic or human error.  Our SRDs, which are attached to the streamer cables, contain air bags which are designed to inflate automatically at a given water depth, bringing the severed streamer cables to the surface.  These SRDs save the seismic contractors significant time and money compared to the alternative of losing the streamer cable.  We also produce seismic streamer steering devices, or “birds,” which are fin-like devices that attach to the streamer cable.  These birds help maintain the streamer cable at a certain desired depth as it is being towed through the water.

Wireless Products

We have developed a land-based wireless (or nodal) seismic data acquisition system called the GSX.  Rather than utilizing interconnecting cables as required by most traditional land data acquisition systems, each GSX station operates as an independent data collection system, allowing our GSX stations to be deployed in virtually unlimited channel configurations.  As a result, our GSX system requires less maintenance, which we believe allows our customers to operate more effectively and efficiently because of its reduced environmental impact, lower weight and ease of operation.  Our GSX system is designed into configurations ranging from one to four channels per station.  Since its introduction in 2008 and through September 30, 2017, we have sold 403,000 GSX channels

1

and we have 71,000 GSX channels in our rental fleet.  We expect to make additional investments in our GSX rental fleet in fiscal year 2018 to replenish a sale of used GSX rental equipment in the fourth quarter of fiscal year 2017.

We have also developed a marine-based wireless seismic data acquisition system called the OBX.  Similar to our GSX land-based wireless system, the marine OBX system can be deployed in virtually unlimited channel configurations and does not require interconnecting cables between each station.  Our deep water versions of the OBX system can be deployed in depths of up to 3,450 meters.  Through September 30, 2017, we have sold approximately 600 OBX stations and we have 6,700 OBX stations in our rental fleet.  We expect to make additional investments into our OBX rental fleet during fiscal year 2018.

Reservoir Products

Seismic surveys repeated over selected time intervals show dynamic changes within the reservoir and can be used to monitor the effects of oil and gas development and production.  In this regard, we have developed permanently installed high-definition reservoir monitoring systems for land and ocean-bottom applications in producing oil and gas fields.  We also produce a retrievable version of our ocean-bottom system for use on fields where permanently installed systems are not appropriate or economical.  Utilizing these tools, producers can enhance the recovery of oil and gas deposits over the life of a reservoir.

Our high-definition reservoir monitoring products include the HDSeis™ product line and a suite of borehole and reservoir monitoring products and services.  Our HDSeis™ system is a high-definition seismic data acquisition system with flexible architecture that allows it to be configured as a borehole seismic system or as a subsurface system for both land and marine reservoir-monitoring projects.  The scalable architecture of the HDSeis™ system enables custom designed system configuration for applications ranging from low-channel engineering and environmental-scale surveys requiring a minimum number of recording channels to high-channel surveys required to efficiently conduct permanent reservoir monitoring (“PRM”).  Modular architecture allows virtually unlimited channel expansion.  In addition, multi-system synchronization features make the HDSeis™ system well suited for multi-well or multi-site acquisition, simultaneous surface and downhole acquisition and continuous reservoir monitoring projects.

Reservoir monitoring requires special purpose or custom designed systems in which portability becomes less critical and functional reliability assumes greater importance.  This reliability factor helps assure successful operations in inaccessible locations over a considerable period of time.  Additionally, reservoirs located in deep water or harsh environments require special instrumentation and new techniques to maximize recovery.  Reservoir monitoring also requires high-bandwidth, high-resolution seismic data for engineering project planning and reservoir management.  We believe our HDSeis™ System and tools, designed for cost-effective deployment and lifetime performance, will make borehole and seabed seismic acquisition a cost-effective and reliable process for the challenges of reservoir monitoring.  Our multi-component seismic product developments include an omni-directional geophone for use in reservoir monitoring, a compact marine three-component or four-component gimbaled sensor and special-purpose connectors, connector arrays and cases.

We did not deliver nor did we receive orders for any PRM systems during the fiscal years 2015, 2016 and 2017.

In addition, we produce seismic borehole acquisition systems which employ a fiber optic augmented wireline capable of very high data transmission rates.  These systems are used for several reservoir monitoring applications, including an application pioneered by us allowing operators and service companies to monitor and measure the results of fracturing operations.

Non-Seismic Products

Our non-seismic businesses leverage upon our existing manufacturing facilities and engineering capabilities.  We have found that many of our seismic products, with little or no modification, have direct application to industries beyond those involved in oil and gas exploration and development.  For example, our customers utilize our borehole tools to monitor subsurface carbon dioxide injections and for mine safety applications.

Our non-seismic products include electronic pre-press products that employ direct thermal imaging and digital inkjet printing technologies targeted at the commercial graphics, industrial graphics, textile and flexographic printing industries.  Our other non-seismic products consist of (i) sensors and tools for vibration monitoring, mine safety application and earthquake detection, (ii) cables for power and communication for the offshore oil and gas and offshore construction industries, (iii) water meter cables and connectors, and (iv) other specialty industrial cable and connector products.

Business Strategy

We are currently experiencing depressed industry conditions as a result of lower and volatile crude oil prices and their impact upon capital spending in the oil and gas industry worldwide.  The resulting significant decline in seismic product orders and, in particular, the lack of any orders for PRM systems, has required us to modify our business strategy during this difficult period.  Our current business strategy places more focus on sound financial management practices while we endure this downturn.  We have not changed our primary focus on continued investment in product research and development and, possibly, selective acquisitions and joint ventures.

2

Segment and Geographic Information

We report and categorize our revenue and products into two business segments: Seismic and Non-Seismic.  Our Seismic product segments currently include traditional exploration products, wireless exploration products and reservoir products.  Our Non-Seismic product segments include imaging and industrial products.  Frequently, we receive a minor amount of Seismic product revenue from our Non-Seismic customers.  For a discussion of financial information by segment and geographic area, see Note 20 to the consolidated financial statements contained in this Annual Report on Form 10-K.

Competition

Seismic Products

We are one of the world’s largest designers and manufacturers of seismic related products.  The principal competitors for many of our traditional seismic products are Sercel (a division of CGG), ION Geophysical (“ION”) and INOVA (a joint venture formed in 2009 between ION and Bureau of Geophysical Prospecting, a subsidiary of China National Petroleum Company).  Furthermore, entities in China affiliated with Sercel as well as other Chinese manufacturers produce low-cost seismic products meeting current industry standards.  Most seismic products are price sensitive, so the ability to manufacture these products at a low cost is essential to maintain market share.  We believe our primary competitor in the manufacture of our marine products is Sercel.

The primary competitors for our land wireless data acquisition systems are Sercel, FairfieldNodal, INOVA, Wireless Seismic and numerous smaller entities who have recently introduced new versions of wireless data acquisition systems.  We believe the primary competitors for our marine nodal data acquisition systems are marine seismic data acquisition service providers like FairfieldNodal, Seabed Geosolutions (a joint venture formed between Fugro and CGG), and Magseis ASA, each of whom utilizes their own proprietary nodal technology.  For land and marine wireless data acquisition systems, while price is an important factor in a customer’s decision to purchase the product, we believe customers also place a high value on a product’s historical performance and the ongoing engineering and field support provided by the product’s manufacturer.

Our primary competitors for rental of our traditional and wireless seismic equipment are Mitcham Industries, Inc. and Seismic Equipment Solutions.

3

Our primary competitors for our seabed PRM systems are Alcatel-Lucent and Petroleum Geo-Services ASA.  We believe our primary competitors for high-definition borehole seismic data acquisition systems are Avalon Sciences Ltd and Sercel.  A product’s historical performance, field support and engineering capabilities are important factors for receiving orders for our seismic reservoir products.

The principal keys for success in the seismic instruments and equipment market are technological superiority, product durability, reliability, and customer support.  Price and product delivery are always important considerations for our customers.  In general, most customers prefer to standardize data acquisition systems, geophones and hydrophones, particularly if they are used by seismic companies that have multiple crews which are able to support each other.  This standardization makes it difficult for competitive manufacturers to gain market share from other manufacturers with existing customer relationships.

As mentioned above, a key factor for seismic instruments and equipment manufacturers is durability under harsh field conditions.  Seismic instruments and equipment must meet not only rigorous technical specifications regarding signal integrity and sensitivity, but must also be extremely rugged and durable to withstand the rigors of field use, often in harsh environments.

Non-Seismic Products

There are numerous competitors and competitive technologies including other direct thermal printer manufacturers and manufacturers of direct-to-screen and inkjet solutions.  Our non-seismic industrial products face competition from numerous domestic and international specialty product manufacturers.

Suppliers

We purchase raw materials from a variety of suppliers located in various countries.  We typically have multiple suppliers for our critical materials.  We purchase all of our thermal film from a single supplier.  Except for the film sold to us by this supplier, we know of no other source for thermal film that performs as well in our imaging equipment.  In addition, certain models of our marine wireless products use a timing device manufactured by a single supplier.  We currently do not possess the ability to manufacture this component and have no other source for this device.  For a discussion of the risks related to our reliance on these suppliers, see “Risk Factors – We Rely on Key Suppliers for Certain Components Used in Our Products.”

We do not currently experience any significant difficulties in obtaining raw materials from our suppliers for the production of our seismic or non-seismic products.

Product Manufacturing and Assembly

Our manufacturing and product assembly operations consist of machining, molding or cabling the necessary component parts, configuring these parts along with components received from various vendors and assembling a final product.  We manufacture seismic equipment to the specifications of our customers.  For example, we can armor cables for use in multiple deep water applications.  We assemble geophone strings and seismic telemetry cables based on a number of customer choices such as length, gauge, tolerance and color of molded parts.  Upon completion of our manufacturing and assembly operations, we test our final products to the functional and, in the case of seismic equipment, environmental extremes of product specifications and inspect the products for quality assurance.  Consistent with industry practice, we normally manufacture and ship our products based on firm customer orders, anticipated customer orders and historical product demand.  As a result of the steep decline in product demand that began in fiscal year 2014 and that was further aggravated by the decline in crude oil prices, we currently hold significant inventories of finished goods.  Our finished goods inventories also include sub-assemblies of extensively manufactured products.

Markets and Customers

Our principal customers for our traditional and wireless seismic products are seismic contractors and, to a lesser extent, major independent and government-owned oil and gas companies that either operate their own seismic crews or specify seismic instrument and equipment preferences to contractors.  For our deep water PRM products, our customers are generally large international oil and gas companies that operate long-term offshore oil and gas producing properties.  Our graphics imaging customers primarily consist of direct users of our equipment as well as specialized resellers that focus on the screen-printing and flexographic printing industries.  Our industrial product customers consist of specialty manufacturers, research institutions and industrial product distributors.   One customer comprised 17.8% of our revenue during fiscal year 2017.  One customer comprised 18.5% of our revenue during fiscal year 2016.  No customer comprised 10% or more of our revenue during fiscal year 2015.  The following table describes our revenue by customer type (in thousands):

4

Intellectual Property

We seek to protect our intellectual property by means of patents, trademarks, trade secrets and other measures.  We hold patents on geophones, micro-geophones, seismic data acquisition, in-line retrieval devices and water meter connectors, and we have pending applications on related technology.  We do not consider any single patent essential to our success.  Our patents are scheduled to expire at various dates through 2035.  At this time we are not able to predict the effect of any patent expiration.  We protect our proprietary rights to our technology through a variety of methods, including confidentiality agreements and proprietary information agreements with suppliers, employees, consultants and others who may have access to proprietary information.

Research and Development

We expect to incur significant future research and development expenditures aimed at the development of additional seismic and non-seismic products.  We have incurred company-sponsored research and development expenses of $13.8 million, $13.9 million and $14.7 million during the fiscal years ended September 30, 2017, 2016 and 2015, respectively.

Employees

As of September 30, 2017, we employed 707 people predominantly on a full-time basis, of which 429 were employed in the United States, 238 in the Russian Federation and the remainder in the United Kingdom, Canada, China and Colombia.  A majority of our employees in the Russian Federation belong to a regional union for machine manufacturers.  Our remaining employees are not unionized.  We have never experienced a work stoppage and consider our relationship with our employees to be satisfactory.

Financial Information by Segment and Geographic Area

For a discussion of financial information by segment and geographic area, see Note 20 to the consolidated financial statements contained in this Annual Report on Form 10-K.  For a description of risks attendant to our foreign operations, please see “Risk Factors - Our Foreign Subsidiaries and Foreign Marketing Efforts Are Subject to Additional Political, Economic, Legal and Other Uncertainties Not Generally Associated with Domestic Operations.”

Available Information

We file annual, quarterly and special reports, proxy statements and other information with the Securities and Exchange Commission (“SEC”).  Our SEC filings are available to the public over the internet at the SEC’s website at www.sec.gov.  You may also read and copy any document we file at the SEC’s public reference room at 100 F Street, NE, Washington, DC 20549.  Please call the SEC at 1-800-SEC-0330 for further information on their public reference room.  Our SEC filings are also available to the public on our website at www.geospace.com.  Please note that information contained on our website, whether currently posted or posted in the future, is not a part of this Annual Report on Form 10-K or the documents incorporated by reference in this Annual Report on Form 10-K.

Item 1A. Risk Factors

Risk Factors

Commodity Price Levels May Affect Demand for Our Products, Which Has and Could Continue to Materially and Adversely Affect Our Results of Operations and Liquidity

Demand for many of our products and the profitability of our operations depend primarily on the level of worldwide oil and gas exploration activity.  Prevailing oil and gas prices, with an emphasis on crude oil prices, and market expectations regarding potential changes in such prices significantly affect the level of worldwide oil and gas exploration activity.  During periods of

5

improved energy commodity prices, the capital spending budgets of oil and natural gas operators tend to expand, which results in increased demand for our products.  Conversely, in periods when these energy commodity prices deteriorate, capital spending budgets of oil and natural gas operators tend to contract and the demand for our products generally weakens.  Historically, the markets for oil and gas have been volatile and are subject to wide fluctuation in response to changes in the supply of and demand for oil and gas, market uncertainty and a variety of additional factors that are beyond our control.  These factors include the level of consumer demand, supplies of oil and natural gas, regional and international economic conditions, weather conditions, domestic and foreign governmental regulations (including those related to climate change), price and availability of alternative fuels, political conditions, instability and hostilities in the Middle East and other significant oil-producing regions, increases and decreases in the supply of oil and gas, the effect of worldwide energy conservation measures and the ability of OPEC to set and maintain production levels and prices of foreign imports.

Uncertainty in the European markets and slowing economic growth in growing economies like those in China and India could lead to a decline in demand for crude oil and natural gas.  Slowdowns in economic activity would likely reduce worldwide demand for energy and result in an extended period of lower crude oil and natural gas prices.  Any material changes in oil and gas prices or other market trends that adversely impact seismic exploration activity would likely affect the demand for our products and could materially and adversely affect our results of operations and liquidity.

Generally, as exists at present, imbalances in the supply and demand for oil and gas will ordinarily affect oil and gas prices and, in such circumstances, our company will be adversely affected as now with world supplies exceeding demand.

Our New Products Require a Substantial Investment by Us in Research and Development Expense and May Not Achieve Market Acceptance

Our outlook and assumptions are based on various macro-economic factors and internal assessments, and actual market conditions could vary materially from those assumed.  In recent years, we have incurred significant expenditures to fund our research and development efforts, and we intend to continue those expenditures in the future.  However, research and development is by its nature speculative, and we cannot assure you that these expenditures will result in the development of new products or services or that any new products and services we have developed recently or may develop in the future will be commercially marketable or profitable to us.  In particular, we have incurred substantial expenditures to develop our land and marine wireless nodal seismic data acquisition systems, as well as other seismic products for PRM applications.  In addition, we try to use some of our capabilities to supply products to new markets.  We cannot assure you that we will realize our expectations regarding acceptance of and revenue generated by our new products and services in existing or new markets.

The Short Term Nature of Our Order Backlog and Delayed or Canceled Customer Orders May Cause Us to Experience Fluctuations in Quarterly Results of Operations

Historically, the rate of new orders for our products has varied substantially from quarter to quarter.  Moreover, we typically operate, and expect to continue operating, on the basis of orders in-hand for our products before we commence substantial manufacturing “runs.”  The short-term nature of our order backlog for most products generally does not allow us to predict with any accuracy demand for our products more than approximately three months in advance.  Thus, our ability to replenish orders and the completion of orders, particularly large orders for deep water PRM projects, can significantly impact our operating results and cash flow for any quarter, and results of operations for any one quarter may not be indicative of results of operations for future quarters.

Additionally, customers can delay or even cancel orders and rental contracts before delivery.  For larger orders, we attempt to negotiate for a non-refundable deposit or cancellation penalties depending on our relationship with the customer.  However, such deposits or penalties, even when obtained, may not fully compensate us for our inventory investment and forgone profits if the order is ultimately cancelled.

These periodic fluctuations in our operating results and the impact of any order delays/cancellations could adversely affect our stock price.

Our Credit Risk Could Increase and We May Incur Bad Debt Write-Offs if Our Customers Continue to Face Difficult Economic Circumstances

We believe that our allowance for bad debts is adequate in light of known circumstances.  However, we cannot assure you that additional amounts attributable to uncollectible accounts and notes receivable and bad debt write-offs will not have a material adverse effect on our future results of operations.  Many of our seismic customers are not well capitalized and as a result cannot always pay our invoices when due.  We have in the past incurred write-offs in our accounts and notes receivable due to customer credit problems.  We have found it necessary from time to time to extend trade credit, including promissory notes, to long-term customers and others where some risks of non-payment exist.  With the recent decline in oil prices and a decline in seismic activities around the world, some of our seismic customers may experience significant liquidity difficulties, which increase those credit risks.  An increase in the level of bad debts and any deterioration in our credit risk could adversely affect the price of our stock.  In addition,

6

we rent equipment to our customers which utilize such equipment in various countries around the world.  If our rental customers experience financial difficulties, it could be difficult or impossible to retrieve our rental equipment from foreign countries.

Our Industry is Characterized by Rapid Technological Development and Product Obsolescence, Which May Affect Our Ability to Provide Product Enhancements or New Products on a Timely and Cost Effective Basis

Our instruments and equipment are constantly undergoing rapid technological improvement.  Our future success depends on our ability to continue to:

Current competitors or new market entrants may develop new technologies, products or standards that could render our products obsolete.  We cannot assure you that we will be successful in developing and marketing, on a timely and cost effective basis, product enhancements or new products that respond to technological developments, that are accepted in the marketplace or that comply with new industry standards.  Additionally, in anticipation of customer product orders, from time to time we acquire substantial quantities of inventories, which if not sold or integrated into products within a reasonable period of time, could become obsolete.  In such case, we would be required to impair the value of such inventories on our balance sheet.

We Operate in Highly Competitive Markets and Our Competitors May Be Able to Provide Newer or Better Products Than We Are Able to Provide

The markets for most of our products are highly competitive.  Many of our existing and potential competitors have substantially greater marketing, financial and technical resources than we do.  Some competitors currently offer a broader range of instruments and equipment for sale than we do and may offer financing arrangements to customers on terms that we may not be able to match.  In addition, new competitors may enter the market and competition could intensify.  As to our non-seismic imaging solutions, we compete with other printing solutions, including inkjet and laser printing technologies, many of which are provided by large companies with significant resources.

We cannot assure you that revenue from our products will continue at current volumes or prices if current competitors or new market entrants introduce new products with better features, performance, price or other characteristics than our products.  Competitive pressures or other factors may also result in significant price competition that could have a material adverse effect on our results of operations.

The Limited Market for Our Seismic Products Can Affect Our Revenue in the Seismic Business Segment

In our seismic business segment, we generally market our traditional and wireless products to seismic service contractors.  We estimate that, based on published industry sources, fewer than 50 seismic contracting companies are currently operating in countries other than those operating in the Russian Federation and the former Soviet Union, India, the People’s Republic of China and certain Eastern European countries, where seismic data acquisition activity is difficult to verify.  We estimate that fewer than 20 seismic contractors are engaged in marine seismic exploration.  Due to these market factors, a relatively small number of customers, some of whom are experiencing financial difficulties, account for most of our revenue.  From time to time, these seismic contractors have sought to vertically integrate and acquire our competitors, which has influenced their supplier decisions before and after such transactions.  In addition, consolidation among our customers may further concentrate our business to a limited number of customers and expose us to increased risks related to dependence on a small number of customers.  The loss of a small number of these customers could materially and adversely impact revenue from of our seismic products.  We market our seabed PRM systems products to large oil and gas companies.  Since this product’s introduction in 2002, we have received system orders from three offshore oil and gas operators:  BP, Shell and Statoil, which have accounted for a significant portion of our revenue in fiscal year 2014 and prior fiscal years.  We did not deliver nor have we received orders for any PRM systems since 2014.

7

We Cannot Be Certain of the Effectiveness of Patent Protection on Our Products

We hold and from time to time apply for certain patents relating to some of our seismic products.  We cannot assure you that our patents will prove enforceable or free of challenge, that any patents will be issued for which we have applied or that competitors will not develop functionally similar technology outside the protection of any patents we have or may obtain.

Our Foreign Subsidiaries and Foreign Marketing Efforts Are Subject to Additional Political, Economic, Legal and Other Uncertainties Not Generally Associated with Domestic Operations

Based on customer billing data, revenue to customers outside the United States accounted for approximately 35% of our revenue during fiscal year 2017; however, we believe the percentage of revenue outside the United States is likely higher since many of our products are first delivered to a domestic location and ultimately shipped to a foreign location.  We again expect revenue outside of the United States to represent a substantial portion of our revenue for fiscal year 2018 and subsequent years.

Foreign revenue is subject to special risks inherent in doing business outside of the United States, including the risk of war, terrorist activities, civil disturbances, embargo and government activities, shifting foreign attitudes about conducting business activities with the United States, restrictions of the movement and exchange of funds, inhibitions of our ability to collect accounts receivable, international sanctions, expropriation and nationalization of our assets or those of our customers, currency fluctuations, devaluations and conversion restrictions, confiscatory taxation or other adverse tax policies and governmental actions that may result in the deprivation of our contractual rights, all of which may disrupt markets or our operations.

A portion of our manufacturing is conducted through our subsidiary Geospace Technologies Eurasia, which is based in the Russian Federation.  Our business could be directly affected by political and economic conditions in the Russian Federation, including the current geopolitical instability involving the Russian Federation, Ukraine and Syria.  United States sanctions against Russia have been expanded to preclude export of seismic equipment anywhere in the world that involve persons designated under the sanctions and to include projects in which persons subject to the sanctions have a 33% ownership interest.  Together, these changes make it more difficult for us to support projects that have the potential to produce oil involving Russian energy companies.  Furthermore, if an exporter is unable to determine whether its seismic equipment will be used in such projects, the export is prohibited.  In fiscal year 2017, we imported $1.4 million of products from Geospace Technologies Eurasia for resale elsewhere in the world.  If imports of these products from the Russian Federation are restricted by government regulation, we may be forced to find other sources for these products at potentially higher costs.   Boycotts, protests, unfavorable regulations, additional governmental sanctions and other actions in the region could also adversely affect our ability to operate profitably.  Delays in obtaining governmental approvals can affect our ability to timely deliver our products pursuant to contractual obligations, which could result in us being liable to our customers for damages.  The risk of doing business in the Russian Federation and other economically or politically volatile areas could adversely affect our operations and earnings.

Foreign revenue is also generally subject to the risk of compliance with additional laws, including tariff regulations and import and export restrictions.  International revenue transactions for our products containing hydrophones require prior U.S. government approval in the form of an export license, which may be withheld by the U.S. government based upon factors which we cannot predict.

We may experience difficulties in connection with future foreign revenue.  Additionally, due to foreign laws and restrictions, should we experience substantial growth in certain foreign markets, for example in the Russian Federation, we may not be able to transfer cash balances to the United States to assist with debt servicing or other obligations.

Our Global Operations Expose Us to Risks Associated with Conducting Business Internationally, Including Failure to Comply with U.S.  Laws Which Apply to International Operations, Such as the Foreign Corrupt Practices Act and U.S. Export Control Laws, as well as the Laws of Other Countries

We have offices in Colombia, Canada, China, the Russian Federation and the United Kingdom, in addition to our offices in the United States.  In addition to the risks noted above that are inherent in conducting business internationally, we are also liable for compliance with international and U.S. laws and regulations that apply to our international operations.  These laws and regulations include data privacy requirements, labor relations laws, tax laws, anti-competition regulations, import and trade restrictions, export control laws, U.S. laws such as the Foreign Corrupt Practices Act and similar laws in other countries which also prohibit certain payments to governmental officials or certain payments or remunerations to customers.  Many of our products are subject to U.S. export law restrictions that limit the destinations and types of customers to which our products may be sold, or require an export license in connection with revenue transactions outside the United States.  Given the high level of complexity of these laws, there is a risk that some provisions may be inadvertently breached, for example through the negligent or the unauthorized intentional behavior of individual employees, our failure to comply with certain formal documentation requirements or otherwise.  Additionally, we may be held liable for actions taken by our local dealers and partners.  Violations of these laws and regulations could result in fines, criminal sanctions against us, our officers or our employees, and prohibitions on the conduct of our business.  Any such violations could include prohibitions on our ability to offer our products in one or more countries and could materially damage our reputation, our brands, our international expansion efforts, our ability to attract and retain employees, our business and our operating results.

8

Our Strategy of Leasing Seismic Products Exposes Us to Additional Risks Relating to Equipment Recovery, Lease Renewals, Technological Obsolescence and Impairment of Assets

Our rental fleet of seismic equipment represents a significant portion of our assets and accounts for a growing portion of our revenue.  Equipment leased by our customers is frequently located in foreign countries where retrieval of the equipment after the termination of the lease is difficult or impossible if the customer does not return the equipment.  The costs associated with retrieving this equipment or the loss of equipment that is not retrieved could be significant and could adversely affect our operations and earnings.

The advancement of seismic technology having a significant competitive advantage over the equipment in our rental fleet could have an adverse effect on our ability to profitably lease and/or sell this equipment.  Significant improvements in technology may also require us to record asset impairment charges to write-down the value of our rental fleet investment and to invest significant sums to upgrade or replace our rental fleet with newer equipment demanded by our customers.  In addition, rental contracts may not be renewed for equipment in our rental fleet, whether or not it has become obsolete.  Significant technology improvements by our competitors could have an adverse effect on our results of operations and earnings.

Our equipment leasing business has high fixed costs, which primarily consist of depreciation expenses.  In periods of declining rental revenue, these fixed costs generally do not decline.  As a result, any significant decline in rental revenue caused by reduced demand could adversely affect our results of operations.

Cybersecurity Breaches and Other Disruptions of Our Information Technology Network and Systems Could Adversely Affect Our Business

We rely on information technology networks and systems, some of which are owned and operated by third parties, to process, transmit and store electronic information.  In particular, we depend on our information technology infrastructure for a variety of functions, including worldwide financial reporting, inventory management, procurement, invoicing and email communications.  Any of these systems may be susceptible to outages due to fire, floods, power loss, telecommunications failures, terrorist attacks and similar events.  Despite the implementation of network security measures, our systems and those of third parties on which we rely may also be vulnerable to computer viruses, break-ins, malware and similar disruptions.  Malware, if surreptitiously installed on our systems and not timely detected and removed, could collect and disclose sensitive information relating to our customers, employees or others, exposing us to legal liability and causing us to suffer reputational damage.  It could also lead to disruptions in critical systems or the corruption or destruction of critical data.  If we are unable to prevent such outages and breaches, these events could damage our reputation and lead to financial losses from remedial actions, loss of business or potential liability.

Because We Have No Plans to Pay Any Dividends for the Foreseeable Future, Investors Must Look Solely to Stock Appreciation for a Return on Their Investment in Us

We have not paid cash dividends on our common stock since our incorporation and do not anticipate paying any cash dividends in the foreseeable future.  We currently intend to retain any future earnings to support our operations and growth.  Any payment of cash dividends in the future will be dependent on the amount of funds legally available, our financial condition, capital requirements, loan covenants and other factors that our Board of Directors may deem relevant.  Accordingly, investors must rely on sales of their common stock after price appreciation, which may never occur, as the only way to realize any future gains on their investment.

Unfavorable Currency Exchange Rate Fluctuations Could Adversely Affect Our Results of Operations

Substantially all of our third-party revenue from the United States is invoiced in U.S. dollars, though from time to time we may invoice revenue transactions in foreign currencies including intercompany sales.  As a result, we may be subject to foreign currency fluctuations on our revenue.  The reporting currency for our financial statements is the U.S. dollar.  However, the assets, liabilities, revenue and costs of our Russian, Canadian and United Kingdom subsidiaries and our Chinese and Colombian branch offices are denominated in currencies other than U.S. dollars.  To prepare our consolidated financial statements, we must translate those assets, liabilities, revenue and expenses into U.S. dollars at then-applicable exchange rates.  Consequently, increases and decreases in the value of the U.S. dollar versus these other currencies will affect the amount of these items in our consolidated financial statements, even if their value has not changed in their original currency.  These translations could result in significant changes to our results of operations from period to period.  For the fiscal year ended September 30, 2017, approximately 22.2% of our consolidated revenue related to the operations of our foreign subsidiaries and branches.

We Have a Relatively Small Public Float, and Our Stock Price May be Volatile

At September 30, 2017, we have approximately 13.0 million shares outstanding held by non-affiliates.  This small float results in a relatively limited market for our common stock.  Our daily trading volume for the year ended September 30, 2017

9

averaged approximately 52,000 shares.  Our small float and daily trading volumes have in the past caused, and may in the future result in, significant volatility in our stock price.

We Rely on Key Suppliers for Certain Components Used in Our Products

We no longer manufacture thermal film and now purchase all of our thermal film from a European manufacturer.  Except for the film sold to us by this manufacturer, we know of no other source for thermal film that performs as well in our imaging equipment.  If the European manufacturer were to discontinue producing thermal film, were to become unwilling to contract with us on competitive terms or were unable to supply thermal film in sufficient quantities to meet our requirements, our ability to compete in the direct thermal imaging marketplace could be impaired, which could adversely affect our financial performance.

Certain models of our marine wireless products require a timing device we purchase from a United States manufacturer.  We currently do not possess the ability to manufacture this component and have no other source for this device.  If this manufacturer were to discontinue its production of this timing device, were to become unwilling to contract with us on competitive terms or were unable to supply the component in sufficient quantities to meet our requirements, our ability to compete in the marine wireless marketplace could be impaired, which could adversely affect our financial performance.

Our Success Depends Upon a Limited Number of Key Personnel

Our success depends on attracting and retaining highly skilled professionals.  A number of our employees are highly skilled engineers and other professionals.  In addition, our success depends to a significant extent upon the abilities and efforts of the members of our senior management team.  If we fail to continue to attract and retain such professionals, our ability to compete in the industry could be adversely affected.

A Continued General Downturn in the Economy in Future Periods May Adversely Affect Our Business

Uncertainty in the European markets and slowing growth in China and India and any other economic slowdown in future periods, could adversely affect our business in ways that we cannot predict.  During times of economic slowdown, our customers may reduce their capital expenditures and defer or cancel pending projects and product orders.  Such developments occur even among customers that are not experiencing financial difficulties.  Any economic downturn may adversely affect the demand for oil and gas generally or cause volatility in oil and gas commodity prices and, therefore, adversely affect the demand for delivery of our products to the oil and gas industry.  It could also adversely affect the demand for consumer and industrial products, which could in turn adversely affect our non-seismic business segment.  To the extent these factors adversely affect other seismic companies in the industry, there could be an oversupply of products and services and downward pressure on pricing for seismic products and services, which could adversely affect us.  Additionally, bankruptcies or financial difficulties among our customers could reduce our cash flows and adversely impact our liquidity and profitability.  See “The Limited Market for Our Seismic Products Can Affect Our Revenue in the Seismic Business Segment,” above.

We Have a Minimal Disaster Recovery Program at Our Houston Facilities

Due to its proximity to the Texas Gulf Coast, our facilities in Houston, Texas are annually subject to the threat of hurricanes, and the aftermath that follows.  Hurricanes may cause, among other types of damage, the loss of electrical power for extended periods of time.  If we lost electrical power at our Pinemont facility, or if a fire or other natural disaster occurred, we would be unable to continue our manufacturing operations during the power outage because we do not own a generator or any other back-up power source large enough to provide for our manufacturing power consumption needs.  Additionally, we do not have an alternative manufacturing or operating location in the United States.  Therefore, a significant disruption in our manufacturing operations could materially and adversely affect our business operations during an extended period of a power outage, fire or other natural disaster.  We have a back-up generator to provide power for our information technology operations.  We store our back-up data offsite and we replicate our mission critical data to an alternative cloud-based data center on a real-time basis.  In the event of a major service interruption in our data center, we believe we would be able to activate our mission critical applications within less than 24 hours.

Our Credit Agreement Imposes Restrictions on Our Business

We and several of our subsidiaries are parties to a credit agreement with a bank.  Amounts available for borrowing under the credit agreement are determined by a borrowing base, which is determined based upon the book value of certain of our assets.  The credit agreement limits the incurrence of additional indebtedness, requires the maintenance of a single financial ratio that compares certain of our and our U.S. subsidiaries’ assets to certain of our liabilities, restricts our and our U.S. subsidiaries’ ability to pay cash dividends and contains other covenants customary in agreements of this type.  Our ability to comply with these restrictions may be affected by events beyond our control, including, but not limited to, prevailing economic, financial and industry conditions and continuing declines in our product revenue.  The breach of any of these covenants or restrictions, as well as any failure to make a

10

payment of interest or principal when due, could result in a default under the credit agreement.  Such a default would permit our lender to declare any amounts borrowed from it to be due and payable, together with accrued and unpaid interest, and the ability to borrow under the credit agreement could be terminated.  If we are unable to repay any debts owed to our lender, the lender could proceed against the collateral securing that debt.  While we intend to seek alternative sources of cash in such a situation, there is no guarantee that any alternative cash source would be available or would be available on terms favorable to us.

Reliance on Third Party Subcontractors Could Adversely Affect Our Results of Operations and Reputation

We may rely on subcontractors to complete certain projects.  The quality and timing of production and services by our subcontractors is not totally under our control.  Reliance on subcontractors gives us less control over a project and exposes us to significant risks, including late delivery, substandard quality and high costs.  The failure of our subcontractors to deliver quality products or services in a timely manner could adversely affect our profitability and reputation.

The High Fixed Costs of Our Operations Could Adversely Affect Our Results of Operations

We have a high fixed cost structure primarily consisting of (i) depreciation expenses associated with our rental equipment and (ii) fixed manufacturing costs including salaries and benefits, taxes, insurance, maintenance, depreciation and other fixed manufacturing costs.  In regards to our rental equipment, large declines in the demand for rental equipment could result in substantial operating losses due to the on-going nature of rental equipment depreciation expense.  Concerning our product manufacturing costs, in periods of low product demand our fixed costs generally do not decline or may decline only in modest increments.  Therefore lower demand for our rental equipment and manufactured products could adversely affect our results of operations.

Our Long-Lived Assets May be Subject to Impairment

We periodically assess our long-lived assets for impairment.  Significant sustained future decreases in oil and natural gas prices may require us to write down the value of these assets if future cash flows anticipated to be generated from the related assets fall below the asset’s net book value.  If we are forced to write down the value of our long-lived assets, these noncash asset impairments could adversely affect our results of operations.

Our Use of Percentage-of-Completion Method of Accounting Could Result in Volatility in Our Results of Operations

We recognize revenue and profits on certain PRM systems using the percentage-of-completion method of accounting.  Although we currently have no orders in hand that will require us to utilize the percentage-of-completion method of accounting, we anticipate that such contracts will again occur in the future although we can give no assurances in this regard.  This accounting method requires us to estimate contract costs and the profitability of our long-term contracts.  While such estimates may be reasonably reliable when made, these estimates can change as a result of uncertainties associated with these types of contracts.  Accordingly, we review the contract price and cost estimates periodically as our manufacturing efforts progress, and the cumulative impact of any periodic revisions to the contract price or cost estimates will be reflected in the period in which these changes become known, including, to the extent required, the recognition of losses at the time such losses are known and estimable, and such losses could be material.  In addition, change orders can increase (sometimes substantially) the future scope and cost of a job.  Therefore, change order awards (although frequently beneficial in the long-term) can have the short-term effect of reducing the contract’s percentage-of-completion and, thus, the revenue and profits that otherwise would be recognized to date.

11

We have concluded that certain of our previously issued financial statements should not be relied upon and are restating certain of our previously issued financial statement, which may lead to, among other things, loss of investor confidence, negative impact on our stock price and certain other risks.

As discussed in the Explanatory Note to this Annual Report on Form 10-K and Item 8, “Financial Statements and Supplementary Data”, including Notes 21and 22 of the notes to the Consolidated Financial Statements, on November 16, 2017 our Audit Committee concluded that our audited consolidated financial statements for the fiscal years ended September 30, 2016 and 2015, and the unaudited consolidated financial statements for quarters ended December 31, 2016, March 31, 2017 and June 30, 2017 should no longer be relied upon because of an accounting error. The determination that the applicable financial statements should no longer be relied upon and that certain financial statements would be restated was made following the identification of financial statement misstatements relating to classification of inventories as noncurrent assets. We have determined that a portion of our inventories at September 30, 2016 and 2015 should have been classified as non-current assets, as all inventories were not reasonably expected to be realized in cash, sold or consumed during our next operating cycle, and have corrected this error with restated consolidated balance sheets as of September 30, 2016 and 2015 and as of December 31, 2016, March 31, 2017 and June 30, 2017 in this Annual Report on Form 10-K.  Although the restatement does not affect previously reported total assets, total liabilities, revenues, net loss, loss per share, or cash flows, the restatement makes us subject to additional risks and uncertainties, including unanticipated costs for accounting and legal fees.  Such events may also cause a diversion of our management’s time and attention away from key projects. The restatement, or additional restatements in the future, may lead to a loss of investor confidence and declines in the trading price of our securities.

We have identified a material weakness in our internal control over financial reporting, and this or other material weaknesses, or inadequate remediation measures, could impair our ability to report accurate financial information in a timely manner, which could adversely affect our business and results of operations.

Our management is responsible for establishing and maintaining effective internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act).  As disclosed in Item 9A. “Controls and Procedures”, our management identified a material weakness relating to the error in our classification of current assets with respect to inventories. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of the company’s annual or interim financial statements will not be prevented or detected on a timely basis.  As a result of this material weakness, our management concluded that our internal control over financial reporting was not effective as of September 30, 2016 and September 30, 2017, based on the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control - Integrated Framework (2013).  If our remedial measures are insufficient to address the material weakness, or if additional material weaknesses or significant deficiencies in our internal control are discovered or occur in the future, our consolidated financial statements may contain material misstatements and may not be available in a timely manner and we could be required to restate our financial statements which could lead to substantial additional costs for accounting and legal fees.

Should We Fail to Maintain an Effective System of Internal Control Over Financial Reporting, We May Not Be Able to Accurately Report Our Financial Results and Prevent Material Fraud, Which Could Adversely Affect the Value of Our Common Stock

Effective internal control over financial reporting is necessary for us to provide reliable financial reports and effectively prevent and detect material fraud.  If we cannot provide reliable financial reports or prevent or detect material fraud, our operating results could be misstated.  There can be no assurances that we will be able to prevent control deficiencies from occurring and which could cause us to incur unforeseen costs, negatively impact our results of operations, cause the market price of our common stock to decline, or have other potential adverse consequences.

Item 1B. Unresolved Staff Comments

None.

12

Item 2. Properties

As of September 30, 2017, our operations included the following locations:

Item 3. Legal Proceedings

We are involved in various pending legal actions in the ordinary course of our business.  Management is unable to predict the ultimate outcome of these actions, because of the inherent uncertainty of litigation.  However, management believes that the most probable, ultimate resolution of currently pending matters will not have a material adverse effect on our consolidated financial position, results of operations or cash flows.

Item 4. Mine Safety Disclosures

None.

13

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Stock Performance Graph

The following graph compares the performance of the Company’s common stock with the performance of the Russell 2000 index and the Standard & Poor’s Oil & Gas Equipment and Services index as of each of the dates indicated.

The graph assumes $100 invested on September 30, 2012 (a) in the Company’s common stock, (b) in the stocks comprising the Russell 2000 index on that day and (c) in the stocks comprising the Standard & Poor’s Oil & Gas Equipment and Services index on that day.  Reinvestment of all dividends on stocks comprising the two indices is assumed.  The foregoing graphs are based on historical data and are not necessarily indicative of future performance.  These graphs shall not be deemed to be “soliciting material” or to be “filed” with the SEC or subject to Regulations 14A or 14C under the Securities Exchange Act of 1934, as amended (the “Exchange Act”) or to the liabilities of Section 18 of the Exchange Act.

Holders of Record

Our common stock is traded on The NASDAQ Global Market under the symbol “GEOS”.  On November 15, 2017, there were approximately 123 holders of record of our common stock, and the closing price per share on such date was $15.08 as quoted by The NASDAQ Global Market.

14

Market Information for Common Stock

The following table shows the high and low per share sales prices for our common stock reported on The NASDAQ Global Market.

Dividends

Since our initial public offering in 1997, we have not paid dividends, and we do not intend to pay cash dividends on our common stock in the foreseeable future.  We presently intend to retain our earnings for use in our business, with any future decision to pay cash dividends dependent upon our growth, profitability, financial condition and other factors our Board of Directors may deem relevant.  Our existing credit agreement also has covenants that restrict our ability to pay dividends.  For a discussion of our credit agreement, see the section entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Liquidity and Capital Resources” contained in this Annual Report on Form 10-K.

Securities Authorized for Issuance under Equity Compensation Plans

The following equity plan information is provided as of September 30, 2017:

Equity Compensation Plan Information

Recent Sales of Unregistered Securities and Use of Proceeds

None.

15

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

None.

Item 6. Selected Financial Data

The following table sets forth certain selected historical financial data on a consolidated basis.  We have derived the selected consolidated financial information as of September 30, 2017, 2016 and 2015 and for fiscal years 2017, 2016 and 2015 from our audited consolidated financial statements appearing elsewhere in this Annual Report on Form 10-K.  We have derived the selected consolidated financial information as of September 30, 2014 and 2013 and for fiscal years 2014 and 2013 from audited consolidated information not included herein.  The selected consolidated financial data should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7 and our consolidated financial statements beginning on page F-1 of this Annual Report on Form 10-K.

We did not declare or pay any cash dividends during any of the periods noted in the above tables.

16

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following is management’s discussion and analysis of the major elements of our consolidated financial statements.  You should read this discussion and analysis together with our consolidated financial statements, including the accompanying notes, and other detailed information appearing elsewhere in this Annual Report on Form 10-K, including under the heading “Risk Factors.”  The discussion of our financial condition and results of operations includes various forward-looking statements about our markets, the demand for our products and services and our future plans and results.  These statements are based on assumptions that we consider to be reasonable, but that could prove to be incorrect.  For more information regarding our assumptions, you should refer to the section entitled “Cautionary Note Regarding Forward-Looking Statements and Assumptions” below.

Cautionary Note Regarding Forward-Looking Statements and Assumptions

This Annual Report on Form 10-K and the documents incorporated by reference herein, if any, contain “forward-looking” statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended.  These forward-looking statements can be identified by terminology such as “may”, “will”, “should”, “intend”, “expect”, “plan”, “budget”, “forecast”, “anticipate”, “believe”, “estimate”, “predict”, “potential”, “continue”, “evaluating” or similar words.  Statements that contain these words should be read carefully because they discuss our future expectations, contain projections of our future results of operations or of our financial position or state other forward-looking information.  Examples of forward-looking statements include, among others, statements that we make regarding our expected operating results, the adoption and sale of our products in various geographic regions, anticipated levels of capital expenditures and the sources of funding therefore, and our strategy for growth, product development, market position, financial results and the provision of accounting reserves.  These forward-looking statements reflect our current judgment about future events and trends based on the information currently available to us.  However, there will likely be events in the future that we are not able to predict or control.  The factors listed under the caption “Risk Factors”, as well as cautionary language in this Annual Report on Form 10-K, provide examples of risks, uncertainties and events that may cause our actual results to differ materially from the expectations we describe in our forward-looking statements.  Such examples include, but are not limited to, decreases in commodity price levels, which could reduce demand for our products, the failure of our products to achieve market acceptance, despite substantial investment by us, our sensitivity to short term backlog, delayed or cancelled customer orders, product obsolescence resulting from poor industry conditions or new technologies, bad debt write-offs associated with customer accounts, and any negative impact from our restatement of our financial statements regarding current assets.  The occurrence of the events described in these risk factors and elsewhere in this Annual Report on Form 10-K could have a material adverse effect on our business, results of operations and financial position, and actual events and results of operations may vary materially from our current expectations.  We assume no obligation to revise or update any forward-looking statement, whether written or oral, that we may make from time to time, whether as a result of new information, future developments or otherwise.

Background

We design and manufacture instruments and equipment used by the oil and gas industry to acquire seismic data in order to locate, characterize and monitor hydrocarbon producing reservoirs.  The Company also designs and manufactures non-seismic products, including industrial products and imaging equipment.  See the information under the heading “Business” in this Annual Report on Form 10-K.

Consolidated Results of Operations

As we have reported in the past, our revenue and operating profits have varied significantly from quarter-to-quarter, and even year-to-year, and are expected to continue that trend in the future, especially when our quarterly or annual financial results are impacted by the presence or absence of relatively large, but somewhat erratic, shipments of permanent seabed reservoir monitoring systems and/or wireless data acquisition systems for land and marine applications.

We report and evaluate financial information for two segments: Seismic and Non-Seismic.  Summary financial data by business segment follows (in thousands):

17

Overview

Early in calendar year 2014, we began to experience a softening in the demand for our seismic exploration products, particularly in North America, as capital budgets for oil and gas producers were trending away from exploration-focused activities toward production and exploitation activities.  During this period oil production in North America’s unconventional shale reservoirs increased, as did oil production from other non-OPEC countries, resulting in an oversupply of crude oil in the world market.  Market prices for a barrel of crude oil declined from over $100 in July 2014 to approximately $27 in January 2016, and have recovered somewhat to approximately $57 today.  With this decline in oil and natural gas prices, oil and gas exploration and production companies experienced a significant reduction in cash flows, which resulted in sharp reductions in their capital spending budgets for oil and gas exploration-focused activities, including seismic activities.  We expect revenue from our seismic products, and in particular our traditional and wireless products, to remain low until crude oil prices stabilize at higher levels and exploration-focused industry conditions improve.  We expect these challenging industry conditions to continue to negatively impact the demand for our seismic products throughout fiscal year 2018.  

In September 2017, we were notified by a previous PRM system customer that it is in the process of requesting quotes for two new PRM systems which must utilize fiber optic sensor technology.  Since our PRM designs utilize electrical sensor technology, we will not be participating with a quotation for the design and manufacture of these PRM systems.  We believe that our PRM system designs, which utilize electrical sensor technology, provide the best long-term functionality and performance of any PRM system, and we continue to aggressively market our PRM systems to major oil and gas companies.  However, the occurrence of this notice, combined with the absence of any new PRM orders of any technology type since November 2012, have caused us to provide additional obsolescence reserves for a substantial portion of our PRM inventories, and we concluded a triggering event occurred and performed an impairment assessment on certain heavy equipment used for the manufacturing of PRM systems, which resulted in an impairment.  Specific to our PRM inventories and manufacturing equipment, we recorded obsolescence reserves of $5.1 million and impairment expense of $5.3 million, respectively, in the fourth quarter of our fiscal year ended September 30, 2017.  

Fiscal Year 2017 Compared to Fiscal Year 2016

Consolidated revenue for fiscal year 2017 increased $11.7 million, or 18.8% from fiscal year 2016.  The increase in revenue for fiscal year 2017 was primarily due to an increase in revenue from our seismic business segment, driven by an increase in demand for our wireless exploration products, including the sale of 45,000 GSX channels in our fourth quarter.

Consolidated gross profit (loss) for fiscal year 2017 was a loss of ($20.1) million, compared to a loss of ($19.4) million for fiscal year 2016.  The decline in gross profit (loss) for fiscal year 2017 was primarily due to a $10.3 million increase in inventory obsolescence expenses and a $5.3 million increase in equipment impairment charges.  The decline was partially offset by an increase in wireless exploration product sales and, to a lesser extent, a decrease in manufacturing costs resulting from the Company’s workforce reduction in the second fiscal quarter of 2016.  Until seismic product demand increases to historical norms, we expect our consolidated gross margins to remain low.

In light of current market conditions, our seismic product inventories at September 30, 2017 far exceed levels considered appropriate for the current level of product demand.  We are aggressively working to continue reducing these legacy inventory

18

balances throughout fiscal year 2018 and beyond; however, we also expect to add new inventories for recent product developments.  During periods of excessive inventory levels, our policy has been, and will continue to be, to record higher obsolescence expense in our consolidated income statement as we experience reduced levels of inventory turnover and as our inventories continue to age.  If current market conditions continue, we expect to record additional inventory obsolescence expense in fiscal year 2018 and beyond until seismic product demand and resulting seismic inventory turnover levels return to acceptable levels.

Consolidated operating expenses for fiscal year 2017 were $33.6 million, a decrease of $2.5 million, or 6.9%, from fiscal year 2016.  This decrease was primarily attributable to the Company’s cost reduction program implemented during the second fiscal quarter of 2016 and, to a lesser extent, a decrease in bad debt expense.

Consolidated other income for fiscal year 2017 was flat from fiscal year 2016.  An increase in interest income from our short-term investments and notes receivable was offset by an increase in foreign exchange losses attributable to U.S. dollar deposits held by our Russian subsidiary.

Consolidated income tax expense (benefit) for fiscal year 2017 was $2.7 million compared to ($9.4) million for the corresponding period of the prior fiscal year.  Our effective tax rates for fiscal year 2017 and 2016 were 5.0% and (16.9)%, respectively.  The United States statutory tax rate for the same periods was 35%.  Compared to the United States statutory rate, the lower effective tax rates for fiscal year 2017 resulted from our inability to recognize any tax benefits for the tax losses we incurred in the U.S. and Canada due to the uncertainty surrounding our ability to utilize these losses in the future to offset taxable income.  In addition, for fiscal year 2017, we recorded tax expenses for (i) U.S. income taxes paid in prior years resulting from the sale of rental equipment to our foreign subsidiaries and (ii) the recognition of a valuation allowance against foreign taxes withheld from rental revenues invoiced into foreign taxing jurisdiction.  For fiscal year 2016, the lower effective tax rate resulted primarily from our inability to recognize tax benefits for the tax losses we incurred in the U.S. and Canada due to the uncertainty of their utilization; however, we were able to recognize an income tax benefit of $13.1 million related to our ability to carryback certain U.S. tax losses to obtain a refund of taxes paid in previous years.  

Fiscal Year 2016 Compared to Fiscal Year 2015

Consolidated revenue for fiscal year 2016 decreased $22.8 million, or 26.9%, from fiscal year 2015.  The decrease in revenue for fiscal year 2016 was primarily attributable to substantially lower product demand in our seismic business segment driven by the low level of crude oil prices.  

Consolidated gross profit (loss) for fiscal year 2016 was ($19.4) million, compared to ($11.2) million for fiscal year 2015.  The change in gross profit (loss) for fiscal year 2016 was caused by a number of factors, including (i) a substantial reduction in seismic product revenue, (ii) unabsorbed fixed manufacturing costs due to lower factory utilization caused by reduced demand for our seismic products and (iii) increased inventory obsolescence expenses due to higher levels of slow-moving seismic inventories and (iv) the write-down of certain seismic inventories and rental equipment to their expected net realizable value.  

Consolidated operating expenses for fiscal year 2016 decreased $5.2 million, or 12.6%, from fiscal year 2015.  The decrease in operating expenses was partially attributable to our cost reduction program, as well as a $1.8 million reduction in goodwill impairment expense and a $1.4 million reduction in bad debt expense.

Consolidated other income for fiscal year 2016 decreased $2.5 million, or 93.5%, from fiscal year 2015.  The decrease in other income primarily resulted from a decrease in foreign exchange gains attributable to U.S. dollar deposits held by our Russian subsidiary.

Our effective tax rates for fiscal year 2016 and 2015 were (14.1)% and (34.5)%, respectively.  The United States statutory tax rate for the same periods was 35%.  The lower effective tax rate for fiscal year 2016 resulted from (i) a tax expense for a valuation allowance against the Company’s U.S. and Canadian deferred tax assets of $7.7 million, (ii) a tax expense of $1.4 million to recapture a manufacturers’/producers’ deduction associated with the carryback of our fiscal year 2016 operating loss, and (iii) a tax expense of $1.0 million recorded during the fiscal quarter ended March 31, 2016 to correct our fiscal year 2015 income tax benefit.

Segment Results of Operations

Seismic Products

Fiscal Year 2017 Compared to Fiscal Year 2016

Revenue

Revenue from our seismic products for the fiscal year ended September 30, 2017 increased $13.3 million, or 39.4%, from the prior fiscal year.  The components of this increase include the following:

19

Operating Loss

Our operating loss associated with revenue from our seismic products for the fiscal year ended September 30, 2017 decreased $0.8 million, or 1.7%, from the prior year.  The decrease in operating loss for fiscal year 2017 was primarily due to (i) increased wireless exploration product sales and (ii) lower manufacturing and operating costs due to workforce reductions initiated in the second fiscal quarter of 2016.  This decrease was partially offset by an increase of $10.3 million in inventory obsolescence expense and $5.3 million in impairment charges on PRM manufacturing equipment.  

Fiscal Year 2016 Compared to Fiscal Year 2015

Revenue

Revenue from our seismic products for the fiscal year ended September 30, 2016 decreased $26.8 million, or 44.2%, from the prior fiscal year.  In each of the product groups discussed below, the decline in revenue resulted from lower demand for our seismic products due to a weakening of industry conditions brought about by the substantial decline in oil and gas prices which began in 2014.  The components of this decrease include the following:

Operating Loss

Our operating loss from our seismic products for fiscal year 2016 increased $5.0 million, or 11.6%, from fiscal year 2015.  The increase in operating loss for fiscal year 2016 was due to the substantial decline in our product revenue, unutilized factory costs due to low productivity, inventory obsolescence expense and impairment of rental assets.

Non-Seismic Products

Fiscal Year 2017 Compared to Fiscal Year 2016

Revenue

Revenue from our non-seismic products for the year ended September 30, 2017 decreased $1.7 million, or 6.1%, from fiscal year 2016.   The components of this decrease included the following:

20

Operating Income

Our operating income associated with sales of our non-seismic products for the year ended September 30, 2017 increased by $0.1 million, or 1.4% from fiscal year 2016.  The increase in operating income was primarily driven by price increases and manufacturing efficiencies.

Fiscal Year 2016 Compared to Fiscal Year 2015

Revenue

Revenue from our non-seismic products for the year ended September 30, 2016 increased $4.0 million, or 16.6%, from fiscal year 2015.  The components of this increase include the following:

Operating Income

Our operating income associated with revenue from our non-seismic products for the year ended September 30, 2016 increased by $1.1 million, or 35.0%, from fiscal year 2015.  The increase in operating income was primarily the result of increased revenue from our industrial products and was partially offset by lower operating income from our imaging product segment.

Liquidity and Capital Resources

Fiscal Year 2017

At September 30, 2017, we had approximately $15.1 million in cash and cash equivalents and $36.1 million in short-term investments.  For the fiscal year ended September 30, 2017, we generated $10.1 million of cash in operating activities primarily due to income tax refund as discussed below.  Our net loss of $56.8 million was offset by (i) net non-cash charges of $50.0 million from deferred income taxes, depreciation, accretion, inventory obsolescence, asset impairments, stock-based compensation and bad debts, (ii) income tax refunds totaling $13.0 million, (iii) a $7.7 million decrease in trade accounts and notes receivable resulting from collections, (iv) a $3.0 million decrease in inventories caused by a drawdown of our excess levels of finished goods and (v) a $2.2 million decrease in prepaid income taxes related to the depreciation of intercompany profits by our foreign subsidiary.  These sources of cash were partially offset by (i) the removal of a $9.1 million gross profit from the sale of used rental equipment since such gross profit is reflected in the proceeds from the sale of used rental equipment under investing activities and (ii) $1.3 million decrease in accrued and other expenses primarily due to lower property taxes.

For the fiscal year ended September 30, 2017, we used cash of $5.5 million from investing activities.  These uses of cash included (i) net disbursements of $8.7 million for the purchase of short-term investments, (ii) an investment of $1.2 million in property, plant and equipment and (iii) $0.5 million to expand our equipment rental fleet.  These uses of cash were partially offset by $4.9 million in proceeds from the sale of used rental equipment.  Regarding future investments into our rental fleet, we expect fiscal year 2018 cash investments into our rental fleet to be approximately $6 million and non-cash transfers from our inventory account of approximately $15 million pending demand for OBX and GSX systems.  We estimate fiscal year 2018 cash investments in property, plant and equipment will be approximately $3 million.  Our capital expenditures are expected to be funded from our cash on hand, internal cash flow or, if necessary, from borrowings under our credit agreement.

21

For the fiscal year ended September 30, 2017, we generated cash proceeds of $0.1 million from financing activities from the exercise of stock options by our employees.  We had no long-term debt outstanding throughout the fiscal year ended September 30, 2017.

With the decline in oil and natural gas prices which have occurred since July 2014, exploration and production companies have experienced a significant reduction in cash flows resulting in sharp reductions in their capital spending budgets for exploration-focused activities, including seismic activities.  As a result, our seismic business segment has experienced a significant decline in product orders and associated revenue, resulting in substantial operating losses and the continued depletion of our cash balances.  Due to the uncertainty concerning a recovery of crude oil prices to levels capable of sustaining increased seismic exploration activities, we expect these depressed seismic market conditions to continue through fiscal year 2018.

Our available cash, cash equivalents and short-term investments totaled $51.2 million at September 30, 2017, including $7.6 million of cash and cash equivalents held by our foreign subsidiaries and branch offices.  We intend to permanently reinvest the undistributed earnings of our foreign subsidiaries.  If we were to repatriate the cash held by our foreign subsidiaries, we would be required to accrue and pay taxes on any amounts repatriated.

Our credit agreement allows for borrowings of up to $30.0 million with such amounts available for borrowing determined by a borrowing base.  At September 30, 2017, we had no outstanding borrowings under the credit agreement and, after consideration of $0.3 million of outstanding letters of credit, our borrowing availability under the credit facility was $23.8 million.  At September 30, 2017, we were in compliance with all covenants under the credit agreement.  In October 2017, we extended the maturity of the credit agreement from May 2018 to April 2019.  We currently do not anticipate the need to borrow under the credit agreement; however, we can make no assurance that we will not do so.  

In March 2017, we received a $12.8 million income tax refund from the U.S. Department of Treasury.  The refund was a result of the significant tax losses we experienced in fiscal year 2016 which we elected to carryback to our fiscal year 2014 U.S. tax return to recoup taxes previously paid.  In addition, we expect to receive an additional $0.3 million income tax refund from the U.S. Department of Treasury in our first fiscal quarter of 2018.  For U.S. income tax purposes, we are now in a loss carryforward position in regards to our tax losses for fiscal year 2017 and beyond.  As a result, we will not receive any additional U.S. federal income tax refunds in future years as a result of our current tax losses.  The tax refunds we received in fiscal years 2016 and 2017 have been significant contributors to our overall liquidity.  In the absence of future profitable results of operations, we may need to rely on other sources of liquidity to fund our future operating results, including liquidating short-term investments, executed rental contracts, available borrowings under our credit agreement through its expiration in April 2019, leveraging or sale of real estate assets, sales of rental assets and other liquidity sources which may be available to us.  However, currently we believe that our cash and short-term investment balances will be sufficient to finance our operating losses and planned capital expenditures through December 2018.

Fiscal Year 2016

At September 30, 2016, we had approximately $10.3 million in cash and cash equivalents and $27.5 million in short-term investments.  For the fiscal year ended September 30, 2016, we used $1.7 million of cash in operating activities.  These uses of cash included (i) our net loss of $46.0 million, (ii) a $3.4 million increase in trade accounts and notes receivable primarily due to amounts owed under the OBX Contract, (iii) a $1.9 million decrease in accounts payable primarily due to declining inventory purchases resulting from reduced product demand and (iv) a $2.1 million decrease in accrued and other expenses primarily due to settlements and reductions in expected warranty claims.  These uses of cash were partially offset by (i) non-cash charges of $43.2 million from deferred income taxes, depreciation, accretion, stock-based compensation, inventory obsolescence, asset impairments and bad debts, (ii) a $4.1 million decrease in income tax receivable primarily resulting from an $18.3 million income tax refund received in fiscal year 2016, (iii) a $5.2 million decrease in inventories caused by a drawdown of our excess levels of finished goods, and (iv) a $1.5 million decrease in prepaid income taxes.

For the fiscal year ended September 30, 2016, we used cash of $10.2 million from investing activities.  These uses of cash included (i) net disbursements of $9.4 million from the purchase and sale of short-term investments, (ii) $1.9 million for additions to our property, plant and equipment and (iii) $0.5 million to expand our rental equipment fleet, primarily for additional OBX nodes.  In addition, we made non-cash inventory transfers to our rental fleet of approximately $4.0 million.  These uses of cash were partially offset by $1.6 million in proceeds from the sale of used rental equipment.  

For the fiscal year ended September 30, 2016, we had no cash flows from financing activities.  We had no long-term debt outstanding at September 30, 2016.

Fiscal Year 2015

At September 30, 2015, we had approximately $22.3 million in cash and cash equivalents and $18.1 million in short-term investments.  For the fiscal year ended September 30, 2015, we used $11.4 million of cash from operating activities.  These uses of cash included (i) our net loss of $32.6 million, (ii) a $6.0 million decrease in accrued expenses and other current liabilities primarily due to the payment of fiscal year 2014 incentive compensation, (iii) a $14.8 million increase in income tax receivable resulting from

22

our pretax loss and our intent to claim a tax refund of $17.4 million in our second quarter ending March 2016 for taxes paid in prior years, and (iv) a $3.6 million decrease in deferred revenue primarily due to the revenue recognition of a $3.0 million non-refundable customer deposit.  These uses of cash were partially offset by (i) net non-cash charges of $31.2 million from deferred income taxes, depreciation, goodwill impairment, accretion, stock-based compensation, inventory obsolescence and bad debts, (ii) a $7.1 million decrease in trade accounts and financing receivables resulting from collections and a decline in revenue, (iii) a $9.7 million decrease in inventories caused by reduced product demand and a drawdown of our excess inventories, and (iv) a $1.0 million decrease in prepaid and other current assets.

For the fiscal year ended September 30, 2015, we used cash of $0.3 million from investing activities.  These uses of cash included (i) $4.0 million to expand our rental equipment fleet primarily for the addition of OBX nodes and (ii) $2.2 million for additions to our property, plant and equipment.  These uses of cash were partially offset by (i) proceeds of $4.3 million from the sale of used rental equipment and (ii) net proceeds of $1.6 million from the sale and purchase of short-term investments.

For the fiscal year ended September 30, 2015, we had no cash flows from financing activities.  

Off-Balance Sheet Arrangements

We do not have any obligations which meet the definition of an off-balance sheet arrangement and which have or are reasonably likely to have a current or future effect on our financial statements or the items contained therein that are material to investors.

Contractual Obligations

We have no contractual obligations requiring disclosure.

Critical Accounting Policies

The preparation of financial statements in conformity with accounting principles generally accepted in the United States requires the use of estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes.  We consider many factors in selecting appropriate operational and financial accounting policies and controls, and in developing the estimates and assumptions that are used in the preparation of these financial statements.  We continually evaluate our estimates, including those related to revenue recognition, bad debt reserves, inventory obsolescence reserves, self-insurance reserves for medical expenses, product warranty reserves, stock-based compensation and deferred income tax assets.  We base our estimates on historical experience and various other factors, including the impact from the current economic conditions that we believe to be reasonable under the circumstances.  Actual results may differ from these estimates under different conditions or assumptions.

Our normal credit terms for trade receivables are 30 days.  In certain situations, credit terms for trade receivables may be extended to 60 days or longer and such receivables generally do not require collateral.  Additionally, we provide long-term financing in the form of promissory notes and sales-type leases when competitive conditions require such financing and, in such cases, we may require collateral.  We perform ongoing credit evaluations of our accounts and financing receivables, and allowances are recognized for potential credit losses.

Our long-lived assets are reviewed for impairment whenever an event or change in circumstances indicates the carrying amount of an asset or group of assets may not be recoverable.  The impairment review, if necessary, includes a comparison of expected future cash flows (undiscounted and without interest charges) to be generated by an asset group with the associated carrying value of the related assets.  If the carrying value of the asset group exceeds the expected future cash flows, an impairment loss is recognized to the extent that the carrying value of the asset group exceeds its fair value.

Management makes judgments regarding the interpretation of tax laws that might be challenged upon an audit and cause changes to previous estimates of tax liability.  In addition, we operate within multiple taxing jurisdictions and are subject to audit in these jurisdictions as well as by the Internal Revenue Service.  In management’s opinion, adequate provisions for income taxes have been made for all open tax years.  The potential outcomes of examinations are regularly assessed in determining the adequacy of the provision for income taxes and income tax liabilities.  Management believes that adequate provisions have been made for reasonable and foreseeable outcomes related to uncertain tax matters.

We record a write-down of our inventories when the cost basis of any manufactured product, including any estimated future costs to complete the manufacturing process, exceeds its net realizable value.  Inventories are stated at the lower of cost or market value.  Cost is determined on a first-in, first-out method, except that our offices in the Russian Federation, Colombia and the United Kingdom use an average cost method to value their inventories.

We periodically review the composition of our inventories to determine if market demand, product modifications, technology changes, excessive quantities on-hand and other factors hinder our ability to recover our investment in such inventories.  Management’s assessment is based upon historical product demand, estimated future product demand and various other judgments

23

and estimates.  Inventory obsolescence reserves are recorded when such assessments reveal that portions or components of our inventory investment will not be realized in our operating activities.

The value of our inventories not expected to be realized in cash, sold or consumed during our next operating cycle are classified as non-current assets.

We primarily derive our revenue from product sales and product rentals under short-term operating leases and sales type leases.  Our products are produced in a standard manufacturing operation.  We recognize revenue from product sales when (i) title passes to the customer, (ii) the customer assumes risks and rewards of ownership, (iii) the product sales price has been determined, (iv) collectability of the sales price is reasonably assured and (v) product delivery occurs as directed by our customer.  We recognize rental revenue as earned over the rental period.  Rentals of our equipment generally range from daily rentals to rental periods of up to six months or longer.  Service revenue is recognized when services are rendered and are generally priced on a per day rate.  Except for certain of our PRM products, our products are generally sold without any customer acceptance provisions and our standard terms of sale do not allow customers to return products for credit.

Most of our products do not require installation assistance or sophisticated instruction.  We offer a standard product warranty, which obligates us to repair or replace our products having manufacturing defects.  We maintain a reserve for future warranty costs based on historical experience or, in the absence of historical experience, management estimates.

Recent Accounting Pronouncements

Please refer to Note 1 to our consolidated financial statements contained in this Annual Report for a discussion of recent accounting pronouncements.

Management’s Current Outlook and Assumptions

Crude oil prices for West Texas Intermediate continued their volatility during fiscal year 2017, ranging from a high of $54 per barrel and a low of $43 per barrel.  The instability in price coupled with oversupply in the world market continues to negatively impact the cash flows and spending patterns of oil and gas companies.  Significantly reduced capital spending budgets targeted at oil and gas exploration projects, including both land and marine seismic projects, have contributed to the decline in our seismic business segment revenue and gross profit since fiscal year 2014.  Although WTI crude oil prices have rebounded recently to $57 per barrel today, we believe pricing volatility will continue in the near term and serve to mute any significant rebound in seismic exploration spending during fiscal year 2018.  As a result, we do not expect fiscal year 2018 customer demand for most of our seismic products will exceed fiscal year 2017 levels.  As a result of reduced seismic exploration activities, many of our seismic customers are currently utilizing only a fraction of their owned seismic equipment.  In most cases, this unutilized equipment is generally available for immediate deployment if future demand for seismic services were to increase.  The availability of excess customer-owned seismic equipment combined with substantially reduced capital budgets and cash flows has curtailed our customer’s need to purchase or rent seismic equipment from providers like us.  As a result, we expect large-ticket sales of our GSX and OBX wireless data acquisition systems, as well as sales of our other land and marine seismic products, are likely to remain at depressed levels through fiscal year 2018.

Our rental revenue is primarily derived from short-term leases of our GSX and OBX wireless products and, to a lesser extent, from our traditional and reservoir products.  Rental revenue for our OBX wireless products decreased in fiscal year 2017, primarily due to the expiration of the OBX Contract.  However, demand for rentals of our GSX land-based wireless equipment increased in fiscal year 2017.  We believe our GSX and OBX rental revenue could increase in fiscal year 2018, although we can offer no assurances of such an increase due to the lack of executed firm rental contracts.

Many of our traditional seismic products are characterized as low margin commodity or consumable products with intense international competition.  We believe the level of industry demand for these products is generally a good barometer of seismic crew activities since these product are consumed, damaged or lost while being utilized in seismic field operations.  As a result of current industry conditions, revenue from these products has dropped significantly since fiscal year 2014, and we do not expect revenue levels from these lower margin products to grow during fiscal year 2018.  As we focus our future product development and production activities targeted at higher margin specialty products and new technologies, especially our wireless and reservoir products, we expect future sales of these lower margin traditional seismic products to decline.

We have not received any orders for large-scale seabed PRM systems since November 2012 and we currently do not have any indication that such an order will be received in fiscal year 2018, although we do believe opportunities for PRM orders do exist in today’s market.  If a large-scale order were received in fiscal year 2018, it could significantly impact our fiscal year 2018 revenue and profits.  However, if no such order is received, we expect revenue and profits from our reservoir products to remain at fiscal year 2017 levels.

We expect fiscal year 2018 revenue from our non-seismic products to increase over fiscal year 2017 levels.  We expect our industrial products to contribute the majority of this increase as a result of expanded market acceptance and new product innovations.

24

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

We have market risk relative to our short-term investments, foreign currency exchange rates and interest rates.  We do not engage in commodity or commodity derivative instrument purchase or sales transactions.  Because of the inherent unpredictability of foreign currency rates and interest rates, as well as other factors, actual results could differ materially from those projected in this Item 7A.

Foreign Currency and Operations Risk

One of our wholly-owned subsidiaries, Geospace Technologies Eurasia, is located in the Russian Federation.  In addition, we operate a branch office, Geospace Technologies Sucursal Sudamericana, in Colombia.  Our financial results for these entities may be affected by factors such as volatile changes in foreign currency exchange rates, weak economic conditions or changes in the political climate.  Our consolidated balance sheet at September 30, 2017 reflected approximately $6.2 million and $0.2 million of foreign currency denominated net working capital related to our Russian and Colombian operations, respectively.  Both of these entities receive a portion of their revenue and pay a majority of their expenses primarily in their local currency.  To the extent that transactions of these entities are settled in their local currency, a devaluation of these currencies versus the U.S. dollar could reduce any contribution from these entities to our consolidated results of operations and total comprehensive income as reported in U.S. dollars.  We do not hedge the market risk with respect to our operations in these countries; therefore, such risk is a general and unpredictable risk of future disruptions in the valuation of such currencies versus U.S. dollars to the extent such disruptions result in any reduced valuation of these foreign entities’ net working capital or future contributions to our consolidated results of operations.  At September 30, 2017, the foreign exchange rate for $1.00 (one U.S. dollar) was equal to 57.73 Russian Rubles and 2,937 Colombian Pesos, respectively.  If the value of the U.S. dollar were to increase by ten percent against these foreign currencies, our working capital in the Russian Federation and in Colombia could decline by $0.6 million and $25,000, respectively.

Foreign Currency Intercompany Accounts and Notes Receivable

From time to time, we provide access to capital to our foreign subsidiaries through U.S. dollar denominated interest bearing promissory notes.  Such funds are generally used by our foreign subsidiaries to purchase capital assets and for general working capital needs.  In addition, we sell products to our foreign subsidiaries on trade credit terms in both U.S. dollars and in the subsidiary’s local currency.  At September 30, 2017, we had outstanding Canadian-dollar denominated intercompany accounts receivable of CAN $26.1 million due from our Canadian subsidiary.  We previously considered CAN $24.2 million of this intercompany accounts receivable to be of a long-term nature whereby settlement was not planned or anticipated in the foreseeable future, therefore resulting foreign exchange gains and losses were to be reported in the consolidated balance sheets as a component of other comprehensive income in accordance with ASC 830 “Foreign Currency Matters”.   At September 30, 2017, we reassessed the long-term portion of the intercompany accounts receivable balance since our Canadian subsidiary recently executed a USD $7.3 million sale of a significant portion of its rental equipment.  This transaction was not anticipated, and the resulting cash flows from this equipment sale are expected to result in a substantial decrease in the intercompany accounts receivable owed by the Canadian subsidiary.  These cash flows combined with increased demand for certain wireless equipment manufactured by us increase the likelihood that the intercompany account receivable balance will be deemed of a short-term nature.  At September 30, 2017, we considered the entire CAN$24.2 million intercompany accounts receivable to be of a short-term nature.  In periods subsequent to September 30, 2017, the appreciation or devaluation of the Canadian dollar against the U.S. dollar will result in a gain or loss, respectively, to our consolidated statement of operations.   At September 30, 2017, the foreign exchange rate for USD $1.00 was equal to approximately CAN $1.25.  In September 2017, we entered into a CAN $9.0 million hedge agreement with a United States bank to hedge a portion of our Canadian dollar foreign exchange rate exposure, resulting in an under-hedged position of approximately CAN $17.1 million.  In October 2017, we entered into an additional CAN $11.0 million hedge agreement to further reduce this exposure.  Both hedge agreements expire December 29, 2017.  At September 30, 2017 if the U.S. dollar exchange rate were to strengthen by ten percent against the Canadian dollar, we would recognize a foreign exchange loss of USD $1.4 million in our consolidated financial statements.

Floating Interest Rate Risk

Our credit agreement contains a floating interest rate which subjects us to the risk of increased interest costs associated with any upward movements in bank market interest rates.  Under our credit agreement our borrowing interest rate is the Wall Street Journal prime rate, which was 4.25% at September 30, 2017.  As of September 30, 2017, there were no borrowings outstanding under our credit agreement.

25

Item 8. Financial Statements and Supplementary Data

Our consolidated financial statements, including the reports thereon, the notes thereto and supplementary data begin at page F-1 of this Annual Report on Form 10-K and are incorporated herein by reference.

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None.

Item 9A. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

Our management is responsible for establishing and maintaining a system of disclosure controls and procedures that are designed to ensure that information required to be disclosed in our reports filed under the Exchange Act is recorded, processed, summarized and reported within the time periods specified under SEC’s rules and forms, and that such information is accumulated and communicated to our management, including our Chief Executive Officer (“CEO”) and Chief Financial Officer (“CFO”).  Notwithstanding the foregoing, there can be no assurance that our disclosure controls and procedures will detect or uncover all failures of persons within the Company and its consolidated subsidiaries to report material information otherwise required to be set forth in our reports.

In connection with the preparation of this Annual Report on Form 10-K, we carried out an evaluation under the supervision and with the participation of our management, including the CEO and CFO, as of September 30, 2017 of the effectiveness of the Company’s disclosure controls and procedures, as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act.  Based on that evaluation, the CEO and CFO concluded that our disclosure controls and procedures were not effective at September 30, 2017 due to the material weakness described in “Management’s Report on Internal Control Over Financial Reporting” as of September 30, 2017.

Management’s Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining effective internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act). Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions or that the degree of compliance with the policies or procedures may deteriorate.

Our management assessed the effectiveness of our internal control over financial reporting as of September 30, 2017.  In making this assessment, we used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control Integrated Framework (2013). Based on this assessment, our management concluded that due to a material weakness in our internal control over financial reporting as described below, our internal control over financial reporting was not effective as of September 30, 2017.  

A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of the company’s annual or interim financial statements will not be prevented or detected on a timely basis.

As of September 30, 2017, we did not maintain effective controls concerning our classification of current assets with respect to inventories.  We have determined that a portion of our inventories should have been classified as noncurrent assets, as all inventories were not reasonably expected to be realized in cash, sold or consumed during our next operating cycle.  

This error was subsequently identified and corrected, and resulted in a restatement of the consolidated balance sheets as of September 30, 2016 and 2015 and as of December 31, 2016, March 31, 2017 and June 30, 2017, which are included in this Annual Report on Form 10-K.  The error had no impact upon previously reported total assets, total liabilities, revenues, net loss, loss per share, or cash flows.

Because of this material weakness, management concluded that we did not maintain effective internal control over financial reporting as of September 30, 2015, 2016 and 2017, based on criteria described in Internal Control – Integrated Framework (2013) issued by COSO.

To remediate the material weakness described above, we are designing and implementing a quarterly control to determine the value of our inventories expected to be realized in cash, sold or consumed during the next operating cycle.  This control, which will encompass a review by senior management, will utilize a combination of forecasts and historical trends to determine our future expected inventory utilization.  We believe that this measure will remediate the material weakness identified and strengthen the Company's internal control over financial reporting.

26

BDO USA, LLP, the independent registered public accounting firm that audited the consolidated financial statements of the Company included in this Annual Report on Form 10-K, has issued an attestation report on the Company's internal control over financial reporting as of September 30, 2017 and 2016, based on their audits.

Changes in Internal Control Over Financial Reporting

There were no changes in our internal control over financial reporting that occurred during the fiscal quarter ended September 30, 2017 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.  As discussed above during the first quarter of fiscal year 2018, we are designing and implementing a new control to remediate the material weakness described above.

Item 9B. Other Information

None.

27

PART III

Item 10. Directors, Executive Officers and Corporate Governance

The information required by this Item is contained in our definitive Proxy Statement to be distributed within 120 days of September 30, 2017 in connection with our 2018 Annual Meeting of Stockholders under the captions “Election of Directors,” “Executive Officers and Compensation,” “Section 16(a) Beneficial Ownership Reporting Compliance” and “Code of Ethics” and is incorporated herein by reference.

Item 11. Executive Compensation

The information required by this Item is contained in our definitive Proxy Statement to be distributed within 120 days of September 30, 2017 in connection with our 2018 Annual Meeting of Stockholders under the caption “Executive Officers and Compensation” and is incorporated herein by reference.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The information required by this Item is contained in our definitive Proxy Statement to be distributed within 120 days of September 30, 2017 in connection with our 2018 Annual Meeting of Stockholders under the caption “Security Ownership of Certain Beneficial Owners and Management” and is incorporated herein by reference, and in Item 5, “Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities,” contained in Part II hereof.

Item 13. Certain Relationships and Related Transactions and Director Independence

The information required by this Item is contained in our definitive Proxy Statement to be distributed within 120 days of September 30, 2017 in connection with our 2018 Annual Meeting of Stockholders under the caption “Certain Relationships and Related Transactions” and is incorporated herein by reference.

Item 14. Principal Accountant Fees and Services

The information required by this Item is contained in our definitive Proxy Statement to be distributed within 120 days of September 30, 2017 in connection with our 2018 Annual Meeting of Stockholders under the caption “Independent Public Accountants” and is incorporated herein by reference.

28

PART IV

Item 15. Exhibits and Financial Statement Schedules

Financial Statements and Financial Statement Schedules

The financial statements and financial statement schedules listed on the accompanying Index to Financial Statements (see page F-1) are filed as part of this Annual Report on Form 10-K.

Exhibits

29

30

Item 16. Form 10-K Summary

None.

31

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

Pursuant to the requirements of the Securities Exchange Act of 1934, this Annual Report on Form 10-K has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.

32

GEOSPACE TECHNOLOGIES CORPORATION AND SUBSIDIARIES

INDEX TO FINANCIAL STATEMENTS AND FINANCIAL STATEMENT SCHEDULES

F-1

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and

Stockholders of Geospace Technologies Corporation

Houston, Texas

We have audited the accompanying consolidated balance sheets of Geospace Technologies Corporation (“the Company”) as of September 30, 2017, 2016 and 2015, and the related consolidated statements of operations, comprehensive loss, stockholders’ equity, and cash flows for each of the three fiscal years in the period ended September 30, 2017.  In connection with our audits of the consolidated financial statements, we have also audited the financial statement schedule as of and for each of the three fiscal years in the period ended September 30, 2017 listed in the accompanying index.  These consolidated financial statements and schedule are the responsibility of the Company’s management.  Our responsibility is to express an opinion on these consolidated financial statements and schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States).  Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement.  An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements and schedule.  We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Geospace Technologies Corporation as of September 30, 2017, 2016 and 2015, and the results of its operations and its cash flows for each of the three fiscal years in the period ended September 30, 2017, in conformity with accounting principles generally accepted in the United States of America.

Also, in our opinion, the related financial statement schedule as of and for each of the three fiscal years in the period ended September 30, 2017, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

As discussed in Note 22 to the consolidated financial statements, the accompanying 2016 and 2015 consolidated financial statements have been restated to correct misstatements.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of September 30, 2017 and 2016, based on criteria established in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated December 1, 2017 expressed adverse opinions thereon.

/s/ BDO USA, LLP

Houston, Texas

December 1, 2017

F-2

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and

Stockholders of Geospace Technologies Corporation

Houston, Texas

We have audited the internal control over financial reporting of Geospace Technologies Corporation (the “Company”) as of September 30, 2017 and 2016, based on criteria established in Internal Control-Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria).  The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Item 9A, Management’s Report on Internal Control Over Financial Reporting.  Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States).  Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects.  Our audits included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk.  Our audits also included performing such other procedures as we considered necessary in the circumstances.  We believe that our audits provide a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.  A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements.  Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our report dated November 17, 2016, we expressed an unqualified opinion on the effectiveness of internal control over financial reporting as of September 30, 2016.  Subsequent to November 17, 2016, the Company identified a material misstatement in its consolidated balance sheets as of September 30, 2016 and 2015, requiring restatement of such financial statements. Management revised its assessment of internal control over financial reporting due to the identification of a material weakness, described in the following paragraph, in connection with the financial statement restatement. Accordingly, our opinion on the effectiveness of the Company’s internal control over financial reporting as of September 30, 2016 expressed herein is different from that expressed in our previous report.

A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the Company’s annual or interim financial statements will not be prevented or detected on a timely basis.  A material weakness regarding management’s failure to design and maintain controls over the classification of inventory has been identified and described in management’s assessment. This material weakness was considered in determining the nature, timing, and extent of audit tests applied in our audit of the 2017, 2016 (as restated) and 2015 (as restated) consolidated financial statements, and this report does not affect our report dated December 1, 2017 on those financial statements.

In our opinion, Geospace Technologies Corporation did not maintain, in all material respects, effective internal control over financial reporting as of September 30, 2017 and 2016, based on the COSO criteria.

We do not express an opinion or any other form of assurance on management’s statements referring to any corrective actions taken by the Company after the date of management’s assessment.

F-3

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Geospace Technologies Corporation as of September 30, 2017, 2016 and 2015, and the related consolidated statements of operations, comprehensive loss, stockholders’ equity and cash flows for each of the three fiscal years in the period ended September 30, 2017, and our report dated December 1, 2017 expressed an unqualified opinion thereon.

/s/ BDO USA, LLP

Houston, Texas

December 1, 2017

F-4

Geospace Technologies Corporation and Subsidiaries

Consolidated Balance Sheets

(In thousands, except share amounts)

The accompanying notes are an integral part of the consolidated financial statements.

F-5

Geospace Technologies Corporation and Subsidiaries

Consolidated Statements of Operations

(In thousands, except share and per share amounts)

The accompanying notes are an integral part of the consolidated financial statements.

F-6

Geospace Technologies Corporation and Subsidiaries

Consolidated Statements of Comprehensive Income (Loss)

(In thousands)

The accompanying notes are an integral part of the consolidated financial statements.

F-7

Geospace Technologies Corporation and Subsidiaries

Consolidated Statement of Stockholders’ Equity

For the years ended September 30, 2017, 2016 and 2015

(In thousands, except share amounts)