GREENBRIER COMPANIES INC - Annual Report: 2015 (Form 10-K)

Table of Contents

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549-1004

FORM 10-K

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended August 31, 2015

or

¨ Transition Report Pursuant to Section 13 or 15(d)

of the Securities Exchange Act of 1934

for the transition period from              to             

Commission File No. 1-13146

THE GREENBRIER COMPANIES, INC.

(Exact name of Registrant as specified in its charter)

One Centerpointe Drive, Suite 200, Lake Oswego, OR 97035

(Address of principal executive offices)

(503) 684-7000

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  X    No          

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15 (d) of the Act.    Yes          No  X 

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  X     No       

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  X    No       

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [    ]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one)

Large accelerated filer  X        Accelerated filer             Non-accelerated filer            Smaller reporting company      

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).     Yes          No X 

Aggregate market value of the Registrant’s Common Stock held by non-affiliates as of February 28, 2015 (based on the closing price of such shares on such date) was $1,418,743,180.

The number of shares outstanding of the Registrant’s Common Stock on October 23, 2015 was 28,464,454, without par value.

DOCUMENTS INCORPORATED BY REFERENCE

Certain portions of the Registrant’s definitive Proxy Statement prepared in connection with the Annual Meeting of Stockholders to be held on January 7, 2016 are incorporated by reference into Parts II and III of this Report.

Table of Contents

THE GREENBRIER COMPANIES, INC.

FORM 10-K

TABLE OF CONTENTS

Table of Contents

Forward-Looking Statements

From time to time, The Greenbrier Companies, Inc. and its subsidiaries (Greenbrier or the Company) or their representatives have made or may make forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, including, without limitation, statements as to expectations, beliefs and strategies regarding the future. Such forward-looking statements may be included in, but not limited to, press releases, oral statements made with the approval of an authorized executive officer or in various filings made by us with the Securities and Exchange Commission, including this filing on Form 10-K and in the Company’s President’s letter to stockholders that is typically distributed to the stockholders in conjunction with this Form 10-K and the Company’s Proxy Statement. These statements involve known and unknown risks, uncertainties and other important factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. These forward-looking statements rely on a number of assumptions concerning future events and include statements relating to:

The following factors, among others, could cause actual results or outcomes to differ materially from the forward-looking statements:

Table of Contents

Any forward-looking statements should be considered in light of these factors. Words such as “anticipates,” “believes,” “forecast,” “potential,” “goal,” “contemplates,” “expects,” “intends,” “plans,” “projects,” “hopes,” “seeks,” “estimates,” “could,” “would,” “will,” “may,” “can,” “designed to,” “foreseeable future” and similar expressions identify forward-looking statements. These forward-looking statements are not guarantees of future performance and are subject to risks and uncertainties that could cause actual results to differ materially from the results contemplated by the forward-looking statements. Many of the important factors that will determine these results and values are beyond our ability to control or predict. You are cautioned not to put undue reliance on any forward-looking statements. Except as otherwise required by law, we do not assume any obligation to update any forward-looking statements.

Table of Contents

In assessing forward-looking statements contained herein, readers are urged to read carefully all cautionary statements contained in this Form 10-K, including, without limitation, those contained under the heading, “Risk Factors,” contained in Part I, Item 1A of this Form 10-K.

All references to years refer to the fiscal years ended August 31^st unless otherwise noted.

The Greenbrier Companies is a registered trademark of The Greenbrier Companies, Inc. Gunderson, Maxi-Stack, Auto-Max and YSD are registered trademarks of Gunderson LLC.

Table of Contents

PART I

Introduction

We are one of the leading designers, manufacturers and marketers of railroad freight car equipment in North America and Europe, a manufacturer and marketer of marine barges in North America, a leading provider of wheel services, parts, leasing and other services to the railroad and related transportation industries in North America and a provider of railcar repair, refurbishment and retrofitting services in North America through a joint venture partnership. We also produce rail castings and tank heads through unconsolidated joint ventures and have a 19.5% ownership stake in a railcar manufacturer in Brazil with an option to acquire an additional 40.5% ownership interest which can be exercised no later than December 30, 2017.

We operate an integrated business model in North America that combines freight car manufacturing, wheel services, repair, refurbishment, retrofitting, component parts, leasing and fleet management services. Our model is designed to provide customers with a comprehensive set of freight car solutions utilizing our substantial engineering, mechanical and technical capabilities as well as our experienced commercial personnel. This model allows us to develop cross-selling opportunities and synergies among our various business segments and to enhance our margins. We believe our integrated model is difficult to duplicate and provides greater value for our customers.

We operate in four reportable segments: Manufacturing; Wheels & Parts; Leasing & Services; and GBW Joint Venture. Financial information about our business segments as well as geographic information is located in Note 19 Segment Information to our Consolidated Financial Statements.

The Greenbrier Companies, Inc., which was incorporated in Delaware in 1981, consummated a merger on February 28, 2006 with its affiliate, Greenbrier Oregon, Inc., an Oregon corporation, for the sole purpose of changing its state of incorporation from Delaware to Oregon. Greenbrier Oregon survived the merger and assumed the name, The Greenbrier Companies, Inc. Our principal executive offices are located at One Centerpointe Drive, Suite 200, Lake Oswego, Oregon 97035, our telephone number is (503) 684-7000 and our Internet website is located at http://www.gbrx.com.

Products and Services

Manufacturing

North American Railcar Manufacturing - We manufacture a broad array of railcar types in North America, which includes most railcar types other than coal cars. We have demonstrated an ability to capture high market shares in many of the car types we produce. The primary products we produce for the North American market are:

Intermodal Railcars - We manufacture a comprehensive range of intermodal railcars. Our most important intermodal product is our articulated double-stack railcar. The double-stack railcar is designed to transport containers stacked two-high on a single platform. An articulated double-stack railcar is composed of up to five platforms, each of which is linked by a common set of wheels and axles. Our comprehensive line of articulated and non-articulated double-stack intermodal railcars offers varying load capacities and configurations. The double-stack railcar provides significant operating and capital savings over other types of intermodal railcars.

Tank Cars - We produce a variety of tank cars, including both general and certain pressurized tank cars, which are designed for the transportation of products such as crude oil, ethanol, liquefied petroleum gas, caustic soda, urea ammonium nitrate, vegetable oils, bio-diesel and various other products for the North American market. We continue to expand our product lines.

Table of Contents

Automotive - We manufacture a full line of railcar equipment specifically designed for the transportation of automotive products. Our automotive offerings include our proprietary Auto-Max railcar, Multi-Max auto rack and flat cars for automotive transportation.

Conventional Railcars - We produce a wide range of boxcars, which are used in the transport of forest products, perishables, general merchandise and commodities. We also produce a variety of covered hopper cars for the grain, fertilizer, sand, cement and petrochemical industries as well as gondolas for the steel and metals markets and various other conventional railcar types. Our flat car products include center partition cars for the forest products industry, bulkhead flat cars and solid waste service flat cars.

European Railcar Manufacturing - Our European manufacturing operation produces a variety of tank, automotive and conventional freight railcar (wagon) types, including a comprehensive line of pressurized tank cars for liquid petroleum gas and ammonia and non-pressurized tank cars for light oil, chemicals and other products. In addition, we produce flat cars, coil cars for the steel and metals market, coal cars, gondolas, sliding wall cars and automobile transporter cars for both the continental European and United Kingdom markets. In 2016, we expect to begin production of railcars for the Saudi Arabian market for delivery beginning in 2017.

Marine Vessel Fabrication - Our Portland, Oregon manufacturing facility, located on a deep-water port on the Willamette River, includes marine vessel fabrication capabilities. The marine facilities also increase utilization of steel plate burning and fabrication capacity providing flexibility for railcar production. United States (U.S.) coastwise law, commonly referred to as the Jones Act, requires all commercial vessels transporting merchandise between ports in the U.S. to be built, owned, operated and manned by U.S. citizens and to be registered under the U.S. flag. We manufacture a broad range of Jones Act ocean-going and river barges for transporting merchandise between ports within the U.S. including conventional deck barges, double-hull tank barges, railcar/deck barges, barges for aggregates and other heavy industrial products and dump barges. Our primary focus is on the larger ocean-going vessels although the facility has the capability to compete in other marine-related products.

Wheels & Parts

Wheel Services and Component Parts Manufacturing - We operate a large wheel services and component parts network in North America. Our wheel shops, operating in nine locations, provide complete wheel services including reconditioning of wheels and axles in addition to new axle machining and finishing and axle downsizing. Our component parts facilities, operating in four locations, recondition and manufacture railcar cushioning units, couplers, yokes, side frames, bolsters and various other parts. We also produce roofs, doors and associated parts for boxcars.

GBW Joint Venture

Railcar Repair, Refurbishment, Maintenance and Retrofitting - On July 18, 2014, we and Watco Companies, LLC (Watco), our joint venture partner, contributed our railcar repair, refurbishment, maintenance and retrofitting (Repair) operations to GBW Railcar Services LLC (GBW), an unconsolidated 50/50 joint venture which became our fourth reportable segment (GBW Joint Venture) upon formation. The results of GBW are included as part of Earnings (loss) from unconsolidated affiliates as we account for our interest in GBW under the equity method of accounting. GBW operates the largest independent railcar repair shop network in North America consisting of 33 Repair shops including 12 tank car repair shops certified by the Association of American Railroads (AAR). This network of Repair shops performs heavy railcar repair and refurbishment, as well as routine railcar maintenance for third parties, as well as for our leased and managed fleet.

Leasing & Services

Leasing - Our relationships with financial institutions, combined with our ownership of a lease fleet of approximately 9,300 railcars (6,300 railcars held as equipment on operating leases, 2,800 held as leased railcars for syndication and 200 held as finished goods inventory), enables us to offer flexible financing programs including operating leases and “by the mile” leases to our customers. In addition, we frequently originate leases of railcars, which are either newly built or refurbished by us, or buy railcars from the secondary market, and sell

Table of Contents

the railcars and attached leases to financial institutions and subsequently provide such institutions with management services under multi-year agreements. As an equipment owner and an originator of leases, we participate principally in the operating lease segment of the market. The majority of our leases are “full service” leases whereby we are responsible for maintenance and administration. Maintenance of the fleet is provided, in part, through our GBW Joint Venture. Assets from our owned lease fleet are periodically sold to take advantage of market conditions, manage risk and maintain liquidity.

Management Services - Our management services business offers a broad array of software and services that include railcar maintenance management, railcar accounting services (such as billing and revenue collection, car hire receivable and payable administration), total fleet management (including railcar tracking using proprietary software), administration and railcar remarketing. We currently own or provide management services for a fleet of approximately 269,000 railcars for railroads, shippers, carriers, institutional investors and other leasing and transportation companies in North America.

Backlog

Multi-year supply agreements are a part of rail industry practice. The following table depicts our reported third party railcar backlog in number of railcars and estimated future revenue value attributable to such backlog, at the dates shown:

Our total manufacturing backlog of railcar units as of August 31, 2015 included 36,000 units with a value of $4.24 billion for direct sales and 5,300 units with a value of $0.47 billion intended for syndications to third parties with a lease attached.

Based on current production plans, at least 17,000 units in the August 31, 2015 backlog are scheduled for delivery in 2016. The balance of the production is primarily scheduled for delivery in 2017 and 2018. Currently no orders in our backlog are intended to be placed into our owned lease fleet. Multi-year supply agreements are a part of rail industry practice. A portion of the orders included in backlog reflects an assumed product mix. Under terms of the orders, the exact mix will be determined in the future which may impact the dollar amount of backlog. Marine backlog as of August 31, 2015 was $52 million compared to $112 million as of August 31, 2014.

Our backlog of railcar units and marine vessels is not necessarily indicative of future results of operations. Certain orders in backlog are subject to customary documentation and completion of terms. Customer orders

Table of Contents

contain terms and conditions customary in the industry. Customers may attempt to cancel or modify orders in backlog. In most cases, little variation has been experienced between the quantity ordered and the quantity actually delivered, though the timing of deliveries may be modified from time to time.

Customers

Our customers include railroads, leasing companies, financial institutions, shippers, carriers and transportation companies. We have strong, long-term relationships with many of our customers. We believe that our customers’ preference for high quality products, our technological leadership in developing innovative products and competitive pricing of our railcars have helped us maintain our long-standing relationships with our customers.

In 2015, revenue from one customer, TTX Company (TTX), accounted for approximately 17% of total revenue, 18% of Manufacturing revenue and 11% of Wheels & Parts revenue. No other customers accounted for greater than 10% of total revenue.

Raw Materials and Components

Our products require a supply of materials including steel and specialty components such as brakes, wheels and axles. Specialty components purchased from third parties represent a significant amount of the cost of most freight cars. Our customers often specify particular components and suppliers of such components. Although the number of alternative suppliers of certain specialty components has declined in recent years, there are at least two suppliers for most such components.

Certain materials and components are periodically in short supply which could potentially impact production at our new railcar and refurbishment facilities. In an effort to mitigate shortages and reduce supply chain costs, we have entered into strategic alliances and multi-year arrangements for the global sourcing of certain materials and components, we operate a replacement parts business and we continue to pursue strategic opportunities to protect and enhance our supply chain. We periodically make advance purchases to avoid possible shortages of material due to capacity limitations of component suppliers, shipping and transportation delays and possible price increases.

In 2015, the top ten suppliers for all inventory purchases accounted for approximately 45% of total purchases. Amsted Rail Company, Inc. accounted for 18% of total inventory purchases in 2015. No other suppliers accounted for more than 10% of total inventory purchases. The Company believes it maintains good relationships with its suppliers.

Competition

There are currently six major railcar manufacturers competing in North America. In addition, a number of small manufacturers have recently entered the market. We compete on the basis of quality, price, reliability of delivery, product design and innovation, reputation and customer service and support.

Competition in the marine industry is dependent on the type of product produced. There are two principal competitors that build product types similar to ours. We compete on the basis of experienced labor, launch ways capacity, quality, price and reliability of delivery.

We believe that we are among the top three European railcar manufacturers, which maintain a combined market share of approximately 70%. European freight car manufacturers are largely located in central and eastern Europe where labor rates are lower and work rules are more flexible.

Competition in the wheels & parts and repair businesses is dependent on the type of product or service provided. There are many competitors in the railcar repair and refurbishment business and an increasing number of competitors in the wheel services and other parts businesses. We compete primarily on the basis of quality, timeliness of delivery, customer service, location of shops, price and engineering expertise.

Table of Contents

There are at least twenty institutions that provide railcar leasing and services similar to ours. Many of them are also customers that buy new railcars from our manufacturing facilities and used railcars from our lease fleet, as well as utilize our management services. Many of these institutions have greater resources than we do on our own balance sheet. We compete primarily on the basis of quality, price, delivery, reputation, service offerings and deal structuring and syndication ability. We believe our strong servicing capability and our ability to sell railcars with a lease attached (syndicate railcars), integrated with our manufacturing, repair shops, railcar specialization and expertise in particular lease structures provide a strong competitive position.

Marketing and Product Development

In North America, we use an integrated marketing and sales effort to coordinate relationships in our various segments. We provide our customers with a diverse range of equipment and financing alternatives designed to satisfy each customer’s unique needs, whether the customer is buying new equipment, refurbishing existing equipment or seeking to outsource the maintenance or management of equipment. These custom programs may involve a combination of railcar products, leasing, refurbishing and remarketing services. In addition, we provide customized maintenance management, equipment management, accounting services and proprietary software solutions.

Outside of North America, we maintain relationships with customers through country-specific sales personnel. Our engineering and technical staff works closely with their customer counterparts on the design and certification of railcars. Many European railroads are state-owned and are subject to European Union regulations covering the tender of government contracts.

Through our customer relationships, insights are derived into the potential need for new products and services. Marketing and engineering personnel collaborate to evaluate opportunities and identify and develop new products. For example, we continue to expand our tank car, automotive and covered hopper product offerings in North America. Research and development costs incurred during the years ended August 31, 2015, 2014 and 2013 were $2.5 million, $3.6 million and $2.0 million.

Patents and Trademarks

We have a number of U.S. and non-U.S. patents of varying duration, and pending patent applications, registered trademarks, copyrights and trade names that are important to our products and product development efforts. The protection of our intellectual property is important to our business and we have a proactive program aimed at protecting our intellectual property and the results from our research and development.

Environmental Matters

We are subject to national, state and local environmental laws and regulations concerning, among other matters, air emissions, wastewater discharge, solid and hazardous waste disposal and employee health and safety. Prior to acquiring facilities, we usually conduct investigations to evaluate the environmental condition of subject properties and may negotiate contractual terms for allocation of environmental exposure arising from prior uses. We operate our facilities in a manner designed to maintain compliance with applicable environmental laws and regulations. Environmental studies have been conducted on certain of our owned and leased properties that indicate additional investigation and some remediation on certain properties may be necessary.

Our Portland, Oregon manufacturing facility is located adjacent to the Willamette River. We have entered into a Voluntary Clean-up Agreement with the Oregon Department of Environmental Quality (DEQ) in which we agreed to conduct an investigation of whether, and to what extent, past or present operations at the Portland property may have released hazardous substances to the environment. We are also conducting groundwater remediation relating to a historical spill on the property that preceded our ownership.

Portland Harbor Site

In December 2000, the U.S. Environmental Protection Agency (EPA) classified portions of the Willamette River bed known as the Portland Harbor, including the portion fronting our manufacturing facility, as a federal “National Priority List” or “Superfund” site due to sediment contamination (the Portland Harbor Site). We, along

Table of Contents

with more than 140 other parties, have received a “General Notice” of potential liability from the EPA relating to the Portland Harbor Site. The letter advised us that we may be liable for the costs of investigation and remediation (which liability may be joint and several with other potentially responsible parties) as well as for natural resource damages resulting from releases of hazardous substances to the site. At this time, ten private and public entities, including us (the Lower Willamette Group or LWG), have signed an Administrative Order on Consent (AOC) to perform a remedial investigation/feasibility study (RI/FS) of the Portland Harbor Site under EPA oversight, and several additional entities have not signed such consent, but are nevertheless contributing money to the effort. The EPA-mandated RI/FS is being conducted by the LWG and has cost over $110 million during a 14-year period. We have agreed to initially bear a percentage of the total costs incurred by the LWG in connection with the investigation. Our aggregate expenditure has not been material during the 14-year period. Some or all of any such outlay may be recoverable from other responsible parties. The EPA expects the investigation to continue until 2017.

Eighty-three parties, including the State of Oregon and the federal government, have entered into a non-judicial mediation process to try to allocate costs associated with the Portland Harbor site. Approximately 110 additional parties have signed tolling agreements related to such allocations. On April 23, 2009, the Company and the other AOC signatories filed suit against 69 other parties due to a possible limitations period for some such claims; Arkema Inc. et al v. A & C Foundry Products, Inc.et al, US District Court, District of Oregon, Case #3:09-cv-453-PK. All but 12 of these parties elected to sign tolling agreements and be dismissed without prejudice, and the case has now been stayed by the court, pending completion of the RI/FS. Although, as described below, the draft feasibility study has been submitted, the RI/FS will not be complete until the EPA approves it, which is not likely to occur until at least 2016.

A draft of the remedial investigation study was submitted to the EPA on October 27, 2009. The draft feasibility study was submitted to the EPA on March 30, 2012. That draft feasibility study evaluates several alternative cleanup approaches. The approaches submitted would take from 2 to 28 years with costs ranging from $169 million to $1.8 billion for cleanup of the entire Portland Harbor Site, depending primarily on the selected remedial action levels. The draft feasibility study suggests costs ranging from $9 million to $163 million for cleanup of the area of the Willamette River adjacent to our Portland, Oregon manufacturing facility, depending primarily on the selected remedial action level. In August 2015, the EPA released its own draft feasibility study that suggests a significantly higher range of site-wide costs (from $790 million to $2.4 billion), and clean-up durations ranging from 4 to 18 years. The EPA study does not break those costs down by sub-area.

Neither draft feasibility study addresses responsibility for the costs of clean-up, allocates such costs among the potentially responsible parties, or defines precise boundaries for the cleanup. Responsibility for funding and implementing the EPA’s selected cleanup will be determined after the issuance of the Record of Decision, currently scheduled by the EPA for 2017. Based on the investigation to date, we believe that we did not contribute in any material way to contamination in the river sediments or the damage of natural resources in the Portland Harbor Site and that the damage in the area of the Portland Harbor Site adjacent to our property precedes our ownership of the Portland, Oregon manufacturing facility. Because these environmental investigations are still underway, sufficient information is currently not available to determine our liability, if any, for the cost of any required remediation or restoration of the Portland Harbor Site or to estimate a range of potential loss. Based on the results of the pending investigations and future assessments of natural resource damages, we may be required to incur costs associated with additional phases of investigation or remedial action, and may be liable for damages to natural resources. In addition, we may be required to perform periodic maintenance dredging in order to continue to launch vessels from our launch ways in Portland, Oregon, on the Willamette River, and the river’s classification as a Superfund site could result in some limitations on future dredging and launch activities. Any of these matters could adversely affect our business and Consolidated Financial Statements, or the value of our Portland property.

We have also signed an Order on Consent (Order) with DEQ to finalize the investigation of potential onsite sources of contamination that may have a release pathway to the Willamette River. Interim precautionary measures are also required in the Order and we are currently discussing with the DEQ potential remedial actions which may be required. Our aggregate expenditure has not been material during the 14-year period. However, we could incur significant expenses for remediation. Some or all of any such outlay may be recoverable from other responsible parties.

Table of Contents

Regulation

The Federal Railroad Administration in the U.S. and Transport Canada in Canada administer and enforce laws and regulations relating to railroad safety. These regulations govern equipment and safety appliance standards for freight cars and other rail equipment used in interstate commerce. The AAR promulgates a wide variety of rules and regulations governing the safety and design of equipment, relationships among railroads and other railcar owners with respect to railcars in interchange, and other matters. The AAR also certifies railcar builders and component manufacturers that provide equipment for use on North American railroads. These regulations require us to maintain our certifications with the AAR as a railcar builder and component manufacturer, and products sold and leased by us in North America must meet AAR, Transport Canada, and Federal Railroad Administration standards.

The primary regulatory and industry authorities involved in the regulation of the ocean-going barge industry are the U.S. Coast Guard, the Maritime Administration of the U.S. Department of Transportation, and private industry organizations such as the American Bureau of Shipping.

The regulatory environment in Europe consists of a combination of European Union (EU) regulations and country specific regulations, including a harmonized set of Technical Standards for Interoperability of freight wagons throughout the EU.

U.S. and Canadian railroad industry regulatory authorities released new regulations related to tank railcar manufacturing and retrofitting standards on May 1, 2015. These regulatory changes could materially affect the tank railcar manufacturing and retrofitting process industry-wide, which could negatively affect the potential availability of certain critical components and raw materials including, in particular, steel.

Employees

As of August 31, 2015, we had 10,689 full-time employees, consisting of 9,858 employees in Manufacturing, 593 in Wheels & Parts and 238 employees in Leasing & Services and corporate. In Manufacturing, 5,815 employees, all of whom are located in Mexico and Poland, are represented by unions. At our Wheels & Parts locations, 24 employees are represented by a union. We believe that our relations with our employees are generally good.

Additional Information

We are a reporting company and file annual, quarterly, current and special reports, proxy statements and other information with the Securities and Exchange Commission (SEC). Through a link on the Investor Relations section of our website, http://www.gbrx.com, we make available the following filings as soon as reasonably practicable after they are electronically filed with or furnished to the SEC: our Annual Report on Form 10-K; Quarterly Reports on Form 10-Q; Current Reports on Form 8-K; and any amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended. All such filings are available free of charge. Copies of our Audit Committee Charter, Compensation Committee Charter, Nominating and Corporate Governance Committee Charter and the Company’s Corporate Governance Guidelines are also available on our web site at http://www.gbrx.com. In addition, each of the reports and documents listed above are available free of charge by contacting our Investor Relations Department at The Greenbrier Companies, Inc., One Centerpointe Drive, Suite 200, Lake Oswego, Oregon 97035.

Table of Contents

In addition to the risks outlined in this annual report under the heading “Forward-Looking Statements,” as well as other comments included herein regarding risks and uncertainties, the following risk factors should be carefully considered when evaluating our company. Our business, financial condition or financial results could be materially and adversely affected by any of these risks.

During economic downturns or a rising interest rate environment, the cyclical nature of our business results in lower demand for our products and services and reduced revenue.

Our business is cyclical. Overall economic conditions and the purchasing practices of buyers have a significant effect upon our business due to the impact on demand for our products and services. As a result, during downturns, we could operate with a lower level of backlog and may slow down or halt production at some or all of our facilities. Economic conditions that result in higher interest rates increase the cost of new leasing arrangements, which could cause some of our leasing customers to lease fewer of our railcars or demand shorter lease terms. An economic downturn or increase in interest rates may reduce demand for our products and services, resulting in lower sales volumes, lower prices, lower lease utilization rates and decreased profits.

Currently, interest rates remain at historically low levels. Higher interest rates could increase the cost of, or potentially deter, new leasing arrangements with our customers, reduce our ability to syndicate railcars under lease to financial institutions, or impact the sales price we may receive on such syndications, any of which could materially adversely affect our business, financial condition and results of operations.

Changes in the credit markets and the financial services industry could negatively impact our business, results of operations, financial condition or liquidity.

The credit markets and the financial services industry may experience volatility which can result in tighter availability of credit on more restrictive terms and limit our ability to sell railcar assets. Our liquidity, financial condition and results of operations could be negatively impacted if our ability to borrow money to finance operations, obtain credit from trade creditors, offer leasing products to our customers or sell railcar assets were to be impaired. In addition, scarcity of capital could also adversely affect our customers’ ability to purchase or pay for products from us or our suppliers’ ability to provide us with product, either of which could negatively affect our business and results of operations.

Exposure to fluctuations in commodity and energy prices may impact our results of operations.

Fluctuations in commodity and energy prices, including crude oil and gas prices, could negatively impact the activities of our customers resulting in a corresponding adverse effect on the demand for our products and services. These shifts in demand could affect our results of operations and could have an adverse effect on our profitability. Demand for railcars that are used to transport crude oil and other energy related products is dependent on the demand for these commodities. Prices for oil and gas are subject to large fluctuations in response to relatively minor changes in the supply of, and demand for, oil and gas, market uncertainty and a variety of other economic factors that are beyond our control.

In recent years, oil and gas prices and, therefore, the level of exploration, development and production activity, have experienced significant fluctuations. Worldwide economic, political and military events, including war, terrorist activity, events in the Middle East and initiatives by the Organization of the Petroleum Exporting Countries (OPEC), have contributed, and are likely to continue to contribute, to price and volume volatility. Crude oil prices have declined significantly in the past year. Increasing global supply of oil in conjunction with weakening demand from slowing economic growth in Europe and Asia and increased fuel-efficiency has created downward pressure on crude oil prices.

Table of Contents

A portion of our backlog and Leased railcars for syndication relates to the energy sector. A decline in energy prices could negatively impact the creditworthiness of our customers, lead to attempted modifications or cancellations of contracts or negatively impact our ability to syndicate our railcars, all of which could materially adversely affect our business, financial condition and results of operations.

Volatility in the global financial markets may adversely affect our business, financial condition and results of operation.

During periods of volatility in the global financial markets, certain of our customers could delay or otherwise reduce their purchases of railcars and other products and services. If volatile conditions in the global credit markets impact our customers’ access to credit, product order volumes may decrease or customers may default on payments owed to us.

Likewise, if our suppliers face challenges obtaining credit, or otherwise operating their businesses, the supply of materials we purchase from them to manufacture our products may be interrupted. Any of these conditions or events could result in reductions in our revenues, increased price competition, or increased operating costs, which could adversely affect our business, financial condition and results of operations.

We face aggressive competition by a concentrated group of competitors and a number of factors may influence our performance. If we are unable to compete successfully, our market share, margin and results of operations may be adversely affected.

We face aggressive competition by a concentrated group of competitors in all geographic markets and in each area of our business. The railcar manufacturing and repair industry is intensely competitive and we expect it to remain so in the foreseeable future. Competitive factors, including introduction of competitive products, new entrants into certain of our markets, price pressures, limited customer base and the relative competitiveness of our manufacturing facilities and products affect our ability to compete effectively. In addition, new technologies or the introduction of new railcars or other product offerings by our competitors could render our products obsolete or less competitive. If we do not compete successfully, our market share, margin and results of operation may be adversely affected.

A number of factors may influence our performance, including without limitation: fluctuations in the demand for newly manufactured railcars or marine barges; fluctuations in demand for wheels, repair and parts; our ability to adjust to the cyclical nature of the industries in which we operate; delays in receipt of orders, risks that contracts may be canceled during their term or not renewed and that customers may not purchase the amount of products or services under the contracts as anticipated; our customers may be financially unable to pay for products and services already provided; domestic and global economic conditions including such matters as embargoes or quotas; growth or reduction in the surface transportation industry; steel and specialty component price fluctuations and availability, scrap surcharges, steel scrap prices and other commodity price fluctuations and their impact on product demand and margin; loss of business from, or a decline in the financial condition of, any of the principal customers that represent a significant portion of our total revenues; industry overcapacity and our manufacturing capacity utilization; and other risks, uncertainties and factors. If we are unfavorably affected by any of these factors, our market share, margin and results of operation may be adversely affected.

Our actual results may differ significantly from our announced strategic initiatives.

From time to time, we have released, and may continue to release information in our quarterly earnings releases, quarterly earnings conference calls, or otherwise, regarding our anticipated future performance and goals. Our actual results may differ significantly and we may not be successful in achieving the objectives outlined in our announced strategic initiatives. Failure to meet these goals could have a material adverse effect on the trading price or volume of our stock.

Table of Contents

A change in our product mix due to shifts in demand could have an adverse effect on our profitability.

We manufacture and, through our GBW Joint Venture, repair a variety of railcars. The demand for specific types of these railcars and mix of refurbishment work varies from time to time. These shifts in demand could affect our revenue and margins and could have an adverse effect on our profitability. Currently a portion of our backlog and railcar demand includes a concentrated product mix of covered hoppers and tank cars used in energy related transportation. A sudden change in these markets could have an adverse effect on our profitability. For example, a change in environmental and governmental regulations, competitive pricing, pipeline capacity, the price of crude oil and related products and other factors could reduce demand for railcars in the energy transportation industry.

Our backlog is not necessarily indicative of the level of our future revenues.

Our manufacturing backlog represents future production for which we have written orders from our customers in various periods, and estimated potential revenue attributable to those orders. Some of this backlog is subject to our fulfillment of certain competitive conditions. Our reported backlog may not be converted to revenue in any particular period and some of our contracts permit cancellations with limited compensation that would not replace lost revenue or margins. In addition, some customers may attempt to cancel or modify a contract even if the contract does not allow for such cancellation or modification, and we may not be able to recover all revenue or earnings lost due to a breach of contract. The likelihood of attempted cancellations or modifications of contracts generally increases during periods of market weakness. Actual revenue from such contracts may not equal our anticipated revenues based on our backlog, and therefore, our backlog is not necessarily indicative of the level of our future revenues.

We rely on limited suppliers for certain components and services needed in our production. If we are not able to procure specialty components or services on commercially reasonable terms or on a timely basis, our business, financial condition and results of operations would be adversely affected.

Our manufacturing operations depend in part on our ability to obtain timely deliveries of materials, components and services in acceptable quantities and quality from our suppliers. In 2015, the top ten suppliers for all inventory purchases accounted for approximately 45% of total purchases. Amsted Rail Company, Inc. accounted for 18% of total inventory purchases in 2015. No other suppliers accounted for more than 10% of total inventory purchases. Certain components of our products, particularly specialized components like castings, bolsters, trucks, wheels and axels, and certain services, such as lining capabilities, are currently available from only a limited number of suppliers. Increases in the number of railcars manufactured have increased the demand for such components and services and strong demand may cause industry-wide shortages if suppliers are in the process of ramping up production or reach capacity production. Our dependence on a limited number of suppliers involves risks, including limited control over pricing, availability and delivery schedules. If any one or more of our suppliers cease to provide us with sufficient quantities of our components or services in a timely manner or on terms acceptable to us, or cease to provide services or manufacture components of acceptable quality, we could incur disruptions or be limited in our production of our products and we could have to seek alternative sources for these components or services. We could also incur delays while we attempt to locate and engage alternative qualified suppliers and we might be unable to engage acceptable alternative suppliers on favorable terms, if at all. In addition, we are increasing the number of components and services we manufacture or provide ourselves, directly or through joint ventures. If we are not successful at manufacturing such components or providing such services or have production problems after transitioning to self-produced supplies, we may not be able to replace such components or services from third party suppliers in a timely manner. Any such disruption in our supply of specialized components and services or increased costs of those components or services could harm our business and adversely affect our results of operations.

U.S. and Canadian railroad industry regulatory authorities released new regulations related to tank railcar manufacturing and retrofitting standards on May 1, 2015. These regulatory changes could materially affect the tank railcar manufacturing and retrofitting process industry-wide, which could negatively affect the potential

Table of Contents

availability of certain critical components and raw materials including, in particular, steel. If we are unable to source critical components and raw materials like steel in a timely manner and at reasonable cost, we may be unable to manufacture or retrofit railcars that comply with the new regulations or take advantage of any increase in demand for our products and services as a result of any such new regulations, and our business, financial condition and results of operations could be materially adversely affected.

We derive a significant amount of our revenue from a limited number of customers, the loss of or reduction of business from one or more of which could have an adverse effect on our business.

A significant portion of our revenue is generated from a few major customers. Although we have some long-term contractual relationships with our major customers, we cannot be assured that our customers will continue to use our products or services or that they will continue to do so at historical levels. A reduction in the purchase or leasing of our products or a termination of our services by one or more of our major customers could have an adverse effect on our business and operating results.

Train derailments or other accidents or claims could subject us to legal claims that adversely impact our business, financial condition and our results of operations.

We provide a number of services which include the manufacture and supply of wheels, components and parts and lease of railcars for our customers that transport a variety of commodities, including tank railcars that transport hazardous materials such as crude oil, ethanol and other products. We could be subject to various legal claims, including claims for negligence, personal injury, physical damage and product or service liability, or in some cases strict liability, as well as potential penalties and liability under environmental laws and regulations, in the event of a derailment or other accident involving railcars, including tank railcars. Additionally, the severity of injury or property damage arising from an incident may influence the causation responsibility analysis exposing us to potentially greater liability. If we become subject to any such claims and are unable successfully to resolve them or have inadequate insurance for such claims, our business, financial condition and results of operations could be materially adversely affected.

On July 6, 2013, a train carrying crude oil and operated by Montreal, Main & Atlantic Railway, Inc. derailed in the town of Lac-Mégantic, Quebec, causing severe damage and resulting in a number of human fatalities. Some of our competitors and a number of other parties, have been named as a defendant in a class action lawsuit regarding this derailment alleging wrongful death and negligence claims. While we are not currently aware of circumstances that would indicate we are likely to have liability in this matter, the amount of potential damages at issue in the class action could be extremely large. If we were to be found liable for significant damages with respect to this claim, our business, financial condition and results of operations could be materially adversely affected.

Changes in legal and regulatory requirements applicable to the industries in which we operate may adversely impact our business, financial condition and results of operations.

In May 2015, the Pipeline and Hazardous Materials Safety Administration (PHMSA) adopted a final rule that, among other things, imposes a new tank car design standard, a phase out by as early as January 2018 for older DOT-111 cars that are not retrofitted, and a classification and testing program for unrefined petroleum based products, including crude oil. The rule also includes new operational requirements such as speed restrictions. Transport Canada has also issued new regulations that align with the U.S. rule in many respects. Additional laws and regulations have been proposed or adopted that will potentially have a significant impact on railroad operations, including the implementation of “positive train control” (PTC) requirements. PTC is a collision avoidance technology intended to override engineer controlled locomotives and stop certain types of train accidents.

While certain of these legal and regulatory changes could result in increased levels of repair or refurbishment work for our GBW Joint Venture and/or new tank car manufacturing activity, if we are unable to manage to

Table of Contents

adapt our business successfully to changing regulations, our business and results of operations could be adversely affected. We have made investments in our GBW Joint Venture and our new railcar facilities in anticipation of increased demand for retrofits and new tank cars as a result of new regulations. If this demand does not begin to materialize, we may not realize the revenue we anticipated. Or if the demand does materialize, we may not be able to adapt to meet this demand.

We have 312 tank railcars in our lease fleet with a net book value of approximately $26.3 million as of August 31, 2015. As a result of the final rule, certain of our tank cars could be deemed unfit for further commercial use or require retrofits or modifications, and the costs associated with any required retrofits or modifications could be substantial. In addition, the new tank car design requirements may result in significant constraints on transportation capacity during the period while tank cars are being retrofitted or newly constructed to comply with the new regulations. Such transportation capacity constraints could increase the cost of transporting crude oil by rail.

We cannot provide assurance that costs incurred to comply with any new standards and regulations, including those finalized by PHMSA in May 2015, will not be material to our business, financial condition or results of operations.

In addition, the speed restrictions imposed by the new regulations on trains transporting certain types of potentially hazardous cargo may have an adverse impact on demand for tank cars, or potentially other types of freight cars. While rail velocity is affected by many factors including general economic conditions, and has increased since the adoption of the regulations, in some circumstances the specific velocity restrictions imposed by the regulations may significantly reduce overall velocity on congested rail networks. This in turn could lead to an increase in the cost of rail freight transportation and impact availability, making rail less competitive compared to alternative modes of freight transportation. It could also lead to reduced demand for our products as railroads limit additional equipment on their lines.

The use of railcars as a significant mode of transporting freight could decline, become more efficient over time, experience a shift in types of modal transportation, and/or certain railcar types could become obsolete.

As the freight transportation markets we serve continue to evolve and become more efficient, the use of railcars may decline in favor of other more economic modes of transportation. Features and functionality specific to certain railcar types could result in those railcars becoming obsolete as customer requirements for freight delivery change. Our operations may be adversely impacted by changes in the preferred method used by customers to ship their products or changes in demand for particular products. The industries in which our customers operate are driven by dynamic market forces and trends, which are in turn influenced by economic and political factors. Demand for our railcars may be significantly affected by changes in the markets in which our customers operate. A significant reduction in customer demand for transportation or manufacture of a particular product or change in the preferred method of transportation used by customers to ship their products could result in the economic obsolescence of our railcars, including those leased by our customers. In addition, if railcar transportation becomes more efficient from an increase in velocity or a decrease in dwell times, this could reduce the demand for new railcars.

Any failure by us to comply with regulations imposed by federal and foreign agencies could negatively affect our financial results.

Our operations and the industry we serve, including our customers, are subject to extensive regulation by governmental, regulatory and industry authorities and by federal and foreign agencies. These organizations establish rules and regulations for the railcar industry, including construction specifications and standards for the design and manufacture of railcars; mechanical, maintenance and related standards; and railroad safety. New regulatory rulings and regulations from these entities could impact our financial results, demand for our products and the economic value of our assets. In addition, if we fail to comply with the requirements and regulations of these entities, we could face sanctions and penalties that could negatively affect our financial results.

Table of Contents

Risks related to our operations outside of the U.S. could adversely affect our operating results.

Our current operations outside of the U.S. and any future expansion of our international operations are subject to the risks associated with cross-border business transactions and activities. Political, legal, trade, financial market or economic changes or instability could limit or curtail our foreign business activities and operations. Some foreign countries in which we operate or may operate have regulatory authorities that regulate railroad safety, railcar design and railcar component part design, performance and manufacturing. If we fail to obtain and maintain certifications of our railcars and railcar parts within the various foreign countries where we operate or may operate, we may be unable to market and sell our railcars in those countries. In addition, unexpected changes in regulatory requirements, tariffs and other trade barriers, more stringent rules relating to labor or the environment, adverse tax consequences and currency and price exchange controls could limit operations and make the manufacture and distribution of our products difficult. The uncertainty of the legal environment or geo-political risks in these and other areas could limit our ability to enforce our rights effectively. Because we have operations outside the U.S., we could be adversely affected by violations of the U.S. Foreign Corrupt Practices Act and similar worldwide anti-corruption laws. We operate in parts of the world that have experienced governmental corruption to some degree, and in certain circumstances, strict compliance with anti-corruption laws may conflict with local customs and practices. The failure to comply with laws governing international business practices may result in substantial penalties and fines. Any international expansion or acquisition that we undertake could amplify these risks related to operating outside of the U.S.

In addition, in 2015, we began to establish a presence in the Gulf Cooperation Council region and Latin America and are exploring market opportunities in Eastern Europe and other emerging markets. Our development of customer relationships in these areas may expose us to certain additional risks, including, but not limited to, the following:

If we are unable to successfully manage the risks associated with our global business, our results of operations, financial condition, liquidity and cash flows may be negatively impacted.

We depend on our senior management team and other key employees, and significant attrition within our management team or unsuccessful succession planning for members of our senior management team and other key employees who are at or nearing retirement age, could adversely affect our business.

Our success depends in part on our ability to attract, retain and motivate senior management and other key employees. Achieving this objective may be difficult due to many factors, including fluctuations in global economic and industry conditions, competitors’ hiring practices, cost reduction activities, and the effectiveness of our compensation programs. Competition for qualified personnel can be very intense. We must continue to recruit, retain and motivate senior management and other key employees sufficient to maintain our current business and support our future projects. We are vulnerable to attrition among our current senior management team and other key employees. A loss of any such personnel, or the inability to recruit and retain qualified personnel in the future, could have an adverse effect on our business, financial condition and results of operations.

Table of Contents

Many members of our senior management team and other key employees are at or nearing retirement age. If we are unsuccessful in our succession planning efforts, the continuity of our business and results of operations could be adversely affected.

Risks related to potential misconduct by employees may adversely impact us.

Our employees may engage in misconduct or other improper activities, including noncompliance with our policies or regulatory standards and requirements, which could subject us to regulatory sanctions and materially harm our business. It is not always possible to deter employee misconduct, and the precautions we take to prevent and detect this activity may not be effective in controlling unknown or unmanaged risks or losses, including risks associated with whistleblower complaints and litigation. There can be no assurance that we will succeed in preventing misconduct by employees in the future. In addition, the investigation of alleged misconduct disrupts our operations and may be costly. Any such events in the future may have a material adverse impact on our financial condition or results of operations.

Our relationships with our joint venture and alliance partners could be unsuccessful, which could adversely affect our business.

We have entered into several joint venture agreements and other alliances with other companies to increase our sourcing alternatives, reduce costs, to produce new railcars and repair and retrofit railcars for the North American marketplace. We may seek to expand our relationships or enter into new agreements with other companies. If our joint venture or alliance partners are unable to fulfill their contractual obligations or if these relationships are otherwise not successful in the future, our manufacturing and other costs could increase, we could encounter production disruptions, growth opportunities could fail to materialize, or we could be required to fund such joint venture or alliances in amounts significantly greater than initially anticipated, any of which could adversely affect our business.

If any of our joint ventures generate significant losses, including future potential intangible asset or goodwill impairment charges, it could adversely affect our results of operations or cause our investment to be impaired.

The price of our common stock is subject to volatility.

The market price for our common stock has varied between a high closing sales price of $77.54 per share and a low closing sales price of $22.80 per share in the twenty-four months ended August 31, 2015. This volatility affects the price at which our common stock can be sold. The broader stock market has also experienced price and volume fluctuations. This volatility has affected the market prices of securities issued by many companies for reasons unrelated to their operating performance and may adversely affect the price of our common stock. The price for our common stock is likely to continue to be volatile and subject to price and volume fluctuations in response to market and other factors, including the factors discussed elsewhere in these risk factors and the following:

In addition, in the past, following periods of volatility in the market price of their stock, many companies have been the subject of securities class action litigation. If we became involved in securities class action litigation in the future, it could result in substantial costs and diversion of our management’s attention and resources and could harm our stock price, business, prospects, financial condition and results of operations.

Table of Contents

Shortages of skilled labor could adversely affect our operations.

We depend on skilled labor in the manufacture of railcars and marine barges, repair, refurbishment, retrofitting and maintenance of railcars and provision of wheel services and supply of parts. Some of our facilities are located in areas where demand for skilled laborers often exceeds supply. Shortages of some types of skilled laborers such as welders and machine operators could restrict our ability to maintain or increase production rates, lead to production inefficiencies and increase our labor costs.

A failure to design or manufacture products or technologies or to achieve timely certification or market acceptance of new products or technologies could have an adverse effect on our profitability.

We continue to introduce new railcar products and technologies, and we periodically accept orders prior to receipt of railcar certification or proof of ability to manufacture a quality product that meets customer standards. We could be unable to successfully design or manufacture these new railcar products and technologies. Our inability to develop and manufacture such new products and technologies in a timely fashion and profitable manner, obtain timely certification, or achieve market acceptance, or the existence of quality problems in our new products, could have a material adverse effect on our revenue and results of operations and subject us to penalties, cancellation of orders and/or other damages.

We could be unable to lease railcars at satisfactory rates, remarket leased railcars on favorable terms upon lease termination or realize the expected residual values upon lease termination, which could reduce our revenue and decrease our overall return.

The profitability of our railcar leasing business depends on our ability to lease railcars to our customers at satisfactory rates, and to re-lease or sell railcars we own or manage upon the expiration of existing lease terms. The total rental payments we receive under our operating leases do not fully amortize the acquisition costs of the leased equipment, which exposes us to risks associated with remarketing the railcars. Our ability to lease or remarket leased railcars profitably is dependent upon several factors, including, but not limited to, market and industry conditions, cost of and demand for competing used or newer models, costs associated with the refurbishment of the railcars, market demand or governmental mandate for refurbishment, and interest rates. Our inability to lease, re-lease or sell leased railcars on favorable terms could result in reduced revenues and margins or net gain on disposition of equipment and decrease our overall returns and affect our ability to syndicate railcars to investors.

We could have difficulty integrating the operations of any companies that we acquire or joint ventures we enter into, which could adversely affect our results of operations.

The success of our acquisition and joint venture strategy depends upon our ability to successfully complete acquisitions, to enter into joint ventures and integrate any businesses that we acquire into our existing business. The integration of acquired business operations could disrupt our business by causing unforeseen operating difficulties, diverting management’s attention from day-to-day operations and requiring significant financial resources that would otherwise be used for the ongoing development of our business. The difficulties of integration could be increased by the necessity of coordinating geographically dispersed organizations, integrating personnel with disparate business backgrounds and combining different corporate cultures. Each of these circumstances could be more likely to occur or more severe in consequence in the case of an acquisition or joint venture involving a business that is outside of our core areas of expertise. In addition, we could be unable to retain key employees or customers of the combined businesses. We could face integration issues pertaining to the internal controls, information systems and operational functions of the acquired companies and we also could fail to realize cost efficiencies or synergies that we anticipated when selecting our acquisition candidates and joint ventures. Any of these items could adversely affect our results of operations.

Table of Contents

Our product and service warranties could expose us to potentially significant claims.

We offer our customers limited warranties for many of our products and services. Accordingly, we may be subject to significant warranty claims in the future, such as multiple claims based on one defect repeated throughout our production or servicing process or claims for which the cost of repairing the defective part is highly disproportionate to the original cost of the part. These types of warranty claims could result in costly product recalls, customers seeking monetary damages, significant repair costs and damage to our reputation.

If warranty claims attributable to actions of third party component manufacturers are not recoverable from such parties due to their poor financial condition or other reasons, we could be liable for warranty claims and other risks for using these materials on our products.

Many of our products are sold to third parties who may misuse, improperly install or improperly or inadequately maintain or repair such products thereby potentially exposing us to claims that could increase our costs and weaken our financial condition.

The products we manufacture are designed to work optimally when properly operated, installed, repaired, and maintained. When this does not occur, we may be subjected to claims or litigation associated with injuries or property damage that could increase our costs and weaken our financial condition.

The timing of our asset sales and related revenue recognition could cause significant differences in our quarterly results and liquidity.

We may build railcars or marine barges in anticipation of a customer order, or that are leased to a customer and ultimately planned to be sold to a third party. The difference in timing of production and the ultimate sale is subject to risk. In addition, we periodically sell railcars from our own lease fleet and the timing and volume of such sales is difficult to predict. As a result, comparisons of our manufacturing revenue, deliveries, quarterly net gain on disposition of equipment, income and liquidity between quarterly periods within one year and between comparable periods in different years may not be meaningful and should not be relied upon as indicators of our future performance.

Our financial performance and market value could cause future write-downs of goodwill or intangibles in future periods.

We are required to perform an annual impairment review of goodwill and indefinite lived assets which could result in an impairment charge if it is determined that the carrying value of the asset is in excess of the fair value. We perform a goodwill impairment test annually during our third fiscal quarter. Goodwill is also tested more frequently if changes in circumstances or the occurrence of events indicates that a potential impairment exists. When changes in circumstances, such as a decline in the market price of our common stock, changes in demand or in the numerous variables associated with the judgments, assumptions and estimates made in assessing the appropriate valuation of goodwill indicate the carrying amount of certain indefinite lived assets may not be recoverable, the assets are evaluated for impairment. Among other things, our assumptions used in the valuation of goodwill, which relate to our wheels & parts and Repair operations, include growth of revenue and margins and increased cash flows over time. If actual operating results were to differ from these assumptions, it may result in an impairment of our goodwill. A non-cash impairment charge of $76.9 million ($71.8 million, net of tax) was recorded for the year ended August 31, 2013 which related to our wheels & parts and Repair operations. As of August 31, 2015, we had $43.3 million of goodwill in our Wheels & Parts segment, relating to our wheels & parts business. Future write-downs of goodwill and intangibles could affect certain of the financial covenants under debt instruments and could restrict our financial flexibility. In the event of goodwill impairment, we may have to test other intangible assets for impairment. Impairment charges to our or our joint venture’s goodwill or our indefinite lived assets would impact our results of operations.

Table of Contents

If we or our joint ventures fail to complete capital expenditure projects on time and within budget, or if these projects, once completed, fail to operate as anticipated, such failure could adversely affect our business, financial condition and results of operations.

From time-to-time, we, or our joint ventures, undertake strategic capital projects in order to enhance, expand and/or upgrade facilities and operational capabilities. Our ability, and our joint ventures’ ability, to complete these projects on time and within budget, and for us to realize the anticipated increased revenues or otherwise realize acceptable returns on these investments or other strategic capital projects that may be undertaken is subject to a number of risks. Many of these risks are beyond our control, including a variety of market, operational, permitting, and labor related factors. In addition, the cost to implement any given strategic capital project ultimately may prove to be greater than originally anticipated. If we, or our joint ventures, are not able to achieve the anticipated results from the implementation of any of these strategic capital projects, or if unanticipated implementation costs are incurred, our business, financial condition and results of operations may be adversely affected.

We have potential exposure to environmental liabilities, which could increase costs or have an adverse effect on results of operations.

We are subject to extensive national, state, provincial and local environmental laws and regulations concerning, among other things, air emissions, water discharge, solid waste and hazardous substances handling and disposal and employee health and safety. These laws and regulations are complex and frequently change. We could incur unexpected costs, penalties and other civil and criminal liability if we fail to comply with environmental laws or permits issued to us pursuant to those laws. We also could incur costs or liabilities related to off-site waste disposal or remediating soil or groundwater contamination at our properties, including these set forth below and in the “Environmental Matters” section of this Report. In addition, future environmental laws and regulations may require significant capital expenditures or changes to our operations.

In addition to environmental, health and safety laws, the transportation of commodities by railcar raises potential risks in the event of a derailment or other accident. Generally, liability under existing law in the U.S. and Canada for accidents such as derailments depends on the negligence of the party. However, for certain hazardous commodities being shipped, strict liability concepts may apply.

Our Portland, Oregon manufacturing facility is located adjacent to the Willamette River. We have entered into a Voluntary Cleanup Agreement with the Oregon Department of Environmental Quality (DEQ) in which we agreed to conduct an investigation of whether, and to what extent, past or present operations at the Portland property may have released hazardous substances to the environment. We are also conducting groundwater remediation relating to a historical spill on the property which preceded our ownership.

The U.S. Environmental Protection Agency (EPA) has classified portions of the river bed of the Portland Harbor, including the portion fronting the Company’s manufacturing facility, as a federal “National Priority List” or “Superfund” site due to sediment contamination (the Portland Harbor Site). We, along with more than 140 other parties, have received a “General Notice” of potential liability from the EPA relating to the Portland Harbor Site. The letter advised us that we may be liable for the costs of investigation and remediation (which liability may be joint and several with other potentially responsible parties) as well as for natural resource damages resulting from releases of hazardous substances to the site. We are part of a group that signed an Administrative Order on Consent (AOC) to perform a remedial investigation/feasibility study (RI/FS) of the Portland Harbor Site under EPA oversight, and several additional entities have not signed such consent, but are nevertheless contributing money to the effort. We have agreed to initially bear a percentage of the total costs incurred in connection with the investigation. The EPA expects the investigation to continue until 2017. We cannot provide assurance that any such costs will be recoverable from third parties.

A draft of the remedial investigation study was submitted to the EPA on October 27, 2009. The draft feasibility study was submitted to the EPA on March 30, 2012. That draft feasibility study evaluates several alternative cleanup approaches. The approaches submitted would take from 2 to 28 years with costs ranging from $9 million

Table of Contents

to $163 million for cleanup of the area of the Willamette River adjacent to our Portland, Oregon manufacturing facility, depending primarily on the selected remedial action level. In August 2015, the EPA released its own draft feasibility study that suggests a significantly higher range of site-wide costs (from $790 million to $2.4 billion), but does not break those costs down by sub-area. The EPA’s feasibility study predicts construction durations of from 4 to 18 years for the various alternative cleanup approaches. Neither draft feasibility study addresses responsibility for the costs of clean-up or allocates such costs among potentially responsible parties, or defines precise boundaries for the cleanup. Responsibility for funding and implementing the EPA’s selected cleanup will be determined after the issuance of the Record of Decision.

We have also signed an Order on Consent with DEQ to finalize the investigation of potential onsite sources of contamination that may have a release pathway to the Willamette River. Interim precautionary measures are also required in the order and we are currently discussing with the DEQ potential remedial actions which may be required. Our aggregate expenditure has not been material during the 14-year period, however, we could incur significant expenses for remediation. Some or all of any such outlay may be recoverable from other responsible parties. However, we cannot assure that any such costs will be recoverable from third parties.

Because these environmental investigations are still underway, sufficient information is currently not available to determine our liability, if any, for the cost of any required remediation of the Portland Harbor Site on our adjacent land or to estimate a range of potential loss. Based on the results of the pending investigations and future assessments of natural resource damages, we may be required to incur costs associated with additional phases of investigation or remedial action, and may be liable for damages to natural resources. In addition, we may be required to perform periodic maintenance dredging in order to continue to launch vessels from our launch ways in Portland, Oregon, on the Willamette River, and the river’s classification as a Superfund site could result in some limitations on future dredging and launch activities. Any of these matters could adversely affect our business and Consolidated Financial Statements, or the value of our Portland property.

We are subject to cybersecurity risks and may incur increasing costs in an effort to minimize those risks.

Our business employs systems and websites that allow for the storage and transmission of proprietary or confidential information regarding our customers, employees, job applicants and other parties, including financial information, intellectual property and personal identification information. Security breaches and other disruptions could compromise our information, expose us to liability and harm our reputation and business. The steps we take to deter and mitigate these risks may not be successful. We may not have the resources or technical sophistication to anticipate or prevent current or rapidly evolving types of cyber-attacks. Attacks may be targeted at us, our customers, or others who have entrusted us with information. Actual or anticipated attacks may cause us to incur increasing costs, including costs to deploy additional personnel and protection technologies, train employees, and engage third-party experts or consultants. Advances in computer capabilities, or other technological developments may result in the technology and security measures used by us to protect transaction or other data being breached or compromised. In addition, data and security breaches can also occur as a result of non-technical issues, including intentional or inadvertent breach by our employees or by persons with whom we have commercial relationships. Any compromise or breach of our security could result in a violation of applicable privacy and other laws, legal and financial exposure, negative impacts on our customers’ willingness to transact business with us and a loss of confidence in our security measures, which could have an adverse effect on our results of operations and our reputation.

We have indebtedness, which could have negative consequences to our business or results of operations.

As of August 31, 2015, our total debt was approximately $377.3 million, consisting of borrowings under our convertible notes, credit facilities and term loans. Our indebtedness could have negative consequences to us, and could place us at a competitive disadvantage compared to our less leveraged competitors. It may be difficult for us to satisfy our repayment and other obligations with respect to such indebtedness, and we may not be able to refinance our existing indebtedness as it matures. Indebtedness may also increase our vulnerability to adverse general economic, industry or competitive developments or conditions and limit our flexibility in planning for, or

Table of Contents

reacting to, changes in our business and the industry in which we operate. We may be limited in our ability to raise additional capital or obtain additional financing to fund our operations, capital expenditures or other growth initiatives, and other general corporate requirements and may be required to dedicate a significant portion of our cash flow from operations to interest and principal payments on our indebtedness. We are more exposed to the risk of increased interest rates as certain of our borrowings are at variable rates of interest. As a consequence of our level of indebtedness, a significant portion of our cash flow from operations may be dedicated to debt service requirements. In addition, the terms of our revolving credit facility limit our ability to incur additional indebtedness. If we fail to comply with these covenants, a default may occur, in which case the lender could accelerate the debt. We cannot be assured that we would be able to renegotiate, refinance, restructure or otherwise obtain the necessary funds to satisfy the indebtedness or these obligations.

Fluctuations in foreign currency exchange rates could lead to increased costs and lower profitability.

Outside of the U.S., we conduct business in Mexico, Poland, other European countries, Brazil and Saudi Arabia, and our non-U.S. businesses conduct their operations in local currencies and other regional currencies. We also source materials worldwide. Fluctuations in exchange rates may affect demand for our products in foreign markets or our cost competitiveness and may adversely affect our profitability. Although we attempt to mitigate a portion of our exposure to changes in currency rates through currency rate hedge contracts and other activities, these efforts cannot fully eliminate the risks associated with the foreign currencies. In addition, some of our borrowings are in foreign currency, giving rise to risk from fluctuations in exchange rates. A material or adverse change in exchange rates could result in significant deterioration of profits or in losses for us.

Fluctuations in the availability and price of energy, freight transportation, steel and other raw materials, and our fixed price contracts could have an adverse effect on our ability to manufacture and sell our products on a cost-effective basis and could adversely affect our margins and revenue of our Manufacturing and wheels & parts and Repair businesses.

A significant portion of our business depends upon the adequate supply of steel, components and other raw materials at competitive prices and a small number of suppliers provide a substantial amount of our requirements. The cost of steel and all other materials used in the production of our railcars represents more than half of our direct manufacturing costs per railcar and in the production of our marine barges represents more than 30% of our direct manufacturing costs per marine barge.

Our businesses also depend upon the adequate supply of energy at competitive prices. When the price of energy increases, it adversely impacts our operating costs and could have an adverse effect upon our ability to conduct our businesses on a cost-effective basis. We cannot be assured that we will continue to have access to supplies of energy or necessary components for manufacturing railcars and marine barges. Our ability to meet demand for our products could be adversely affected by the loss of access to any of these supplies, the inability to arrange alternative access to any materials, or suppliers limiting allocation of materials to us.

In some instances, we have fixed price contracts which anticipate material price increases and surcharges, or contracts that contain actual or formulaic pass-through of material price increases and surcharges. However, if the price of steel or other raw materials were to fluctuate in excess of anticipated increases on which we have based our fixed price contracts, or if we were unable to adjust our selling prices or have adequate protection in our contracts against changes in material prices, or if we are unable to reduce operating costs to offset any price increases, our margins would be adversely affected. The loss of suppliers or their inability to meet our price, quality, quantity and delivery requirements could have an adverse effect on our ability to manufacture and sell our products on a cost-effective basis.

Decreases in the price of scrap adversely impact our Wheels & Parts and GBW Joint Venture margins and revenue and the residual value and future depreciation of our leased assets. A portion of our wheels & parts and Repair businesses involves scrapping steel parts and the resulting revenue from such scrap steel increases our margins and revenues. When the price of scrap steel declines, our revenues and margins in such business therefore decrease.

Table of Contents

Some of our employees belong to labor unions and strikes or work stoppages could adversely affect our operations.

We are a party to collective bargaining agreements with various labor unions at some of our operations. Disputes with regard to the terms of these agreements or our potential inability to negotiate acceptable contracts with these unions in the future could result in, among other things, strikes, work stoppages or other slowdowns by the affected workers. We cannot be assured that our relations with our workforce will remain positive. Union organizers are actively working to organize at some of our other facilities. If our workers were to engage in a strike, work stoppage or other slowdown, or other employees were to become unionized or the terms and conditions in future labor agreements were renegotiated, or if union representation is implemented at such sites and we are unable to agree with the union on reasonable employment terms, including wages, benefits, and work rules, we could experience a significant disruption of our operations and higher ongoing labor costs. In addition, we could face higher labor costs in the future as a result of severance or other charges associated with lay-offs, shutdowns or reductions in the size and scope of our operations or due to the difficulties of restarting our operations that have been temporarily shuttered.

A prolonged decline in performance of the rail freight industry would have an adverse effect on our financial condition and results of operations.

Our future success depends in part upon the performance of the rail freight industry, which in turn depends on the health of the economy. If railcar loadings, railcar and railcar components replacement rates or refurbishment rates or industry demand for our railcar products weaken or otherwise do not materialize, our financial condition and results of operations would be adversely affected.

Updates or changes to our information technology systems may result in problems that could negatively impact our business.

We have information technology systems, comprising hardware, network, software, people, processes and other infrastructure that are important to the operation of our businesses. We continue to evaluate and implement upgrades and changes to information technology systems that support substantially all of our operating and financial functions. We could experience problems in connection with such implementations, including compatibility issues, training requirements, higher than expected implementation costs and other integration challenges and delays. A significant problem with an implementation, integration with other systems or ongoing management and operation of our systems could negatively impact our business by disrupting operations. Such a problem could also have an adverse effect on our ability to generate and interpret accurate management and financial reports and other information on a timely basis, which could have a material adverse effect on our financial reporting system and internal controls and adversely affect our ability to manage our business.

An adverse outcome in any pending or future litigation could negatively impact our business and results of operations.

We are a defendant in several pending cases in various jurisdictions. If we are unsuccessful in resolving these claims, our business and results of operations could be adversely affected. In addition, future claims that may arise relating to any pending or new matters, whether brought against us or initiated by us against third parties, could distract management’s attention from business operations and increase our legal and related costs, which could also negatively impact our business and results of operations.

We could be liable for physical damage, business interruption or product liability claims that exceed our insurance coverage.

The nature of our business subjects us to physical damage, business interruption and product liability claims, especially in connection with the repair and manufacture of products that carry hazardous or volatile materials. Although we maintain liability insurance coverage at commercially reasonable levels compared to similarly-sized

Table of Contents

heavy equipment manufacturers, an unusually large physical damage, business interruption or product liability claim or a series of claims based on a failure repeated throughout our production process could exceed our insurance coverage or result in damage to our reputation.

Some of our customers place orders for our products in reliance on their ability to utilize tax benefits or tax credits such as accelerated depreciation.

There is no assurance that tax authorities will reauthorize, modify, or otherwise not allow the expiration of such tax benefits, tax credits, or reimbursement policies, and in cases where such subsidies and policies are materially modified to reduce the available benefit, credit, or reimbursement or are otherwise allowed to expire, the demand for our products could decrease, thereby creating the potential for a material adverse effect on our financial condition or results of operations.

We could be unable to procure adequate insurance on a cost-effective basis in the future.

The ability to insure our businesses, facilities and rail assets is an important aspect of our ability to manage risk. As there are only limited providers of this insurance to the railcar industry, there is no guarantee that such insurance will be available on a cost-effective basis in the future. In addition, we cannot assure that our insurance carriers will be able to pay current or future claims.

Changes in accounting standards or inaccurate estimates or assumptions in the application of accounting policies could adversely affect our financial results.

Our accounting policies and methods are fundamental to how we record and report our financial condition and results of operations. Some of these policies require use of estimates and assumptions that may affect the reported value of our assets or liabilities and financial results and are critical because they require management to make difficult, subjective, and complex judgments about matters that are inherently uncertain. Accounting standard setters and those who interpret the accounting standards (such as the Financial Accounting Standards Board, the SEC, and our independent registered public accounting firm) may amend or even reverse their previous interpretations or positions on how these standards should be applied. In some cases, we could be required to apply a new or revised standard retrospectively, resulting in the revision of prior period financial statements. Changes in accounting standards can be hard to predict and can materially impact how we record and report our financial condition and results of operations.

From time to time we may take tax positions that the Internal Revenue Service or other tax authorities may contest.

We have in the past and may in the future take tax positions that the Internal Revenue Service (IRS) or other tax authorities may contest. We are required by an IRS regulation to disclose particular tax positions to the IRS as part of our tax returns for that year and future years. If the IRS or other tax authorities successfully contests a tax position that we take, we may be required to pay additional taxes, interest or fines that may adversely affect our results of operation and financial position.

Fires, natural disasters, severe weather conditions or public health crisis could disrupt our business and result in loss of revenue or higher expenses. 

Any serious disruption at any of our facilities due to fire, hurricane, earthquake, flood, or any other natural disaster, or an epidemic or other public health crisis, or a panic reaction to a perceived health risk, could impair our ability to use our facilities and have a material adverse impact on our revenues and increase our costs and expenses. If there is a natural disaster or other serious disruption at any of our facilities, particularly any of our Mexican facilities, it could impair our ability to adequately supply our customers, cause a significant disruption

Table of Contents

to our operations, cause us to incur significant costs to relocate or reestablish these functions and negatively impact our operating results. While we insure against certain business interruption risks, such insurance may not adequately compensate us for any losses incurred as a result of natural or other disasters.

Repercussions from terrorist activities or armed conflict could harm our business.

Terrorist activities, anti-terrorist efforts, and other armed conflict involving the U.S. or its interests abroad may adversely affect the U.S. and global economies, potentially preventing us from meeting our financial and other obligations. In particular, the negative impacts of these events may affect the industries in which we operate. This could result in delays in or cancellations of the purchase of our products or shortages in raw materials, parts, or components. Any of these occurrences could have a material adverse impact on our financial results.

Compliance with health care legislation and increases in the cost of providing health care plans to our employees may adversely affect our business.

In March 2010, Congress passed the Patient Protection and Affordable Care Act and the Health Care and Education Affordability Reconciliation Act (collectively, the Acts). Among other things, the Acts contain provisions that affect employer-sponsored health care plans, impose excise taxes on certain plans, and reduce the tax benefits available to employers that receive the Medicare Part D subsidy. Nationally, the cost of providing health care plans to a company’s employees has increased at annual rates in excess of inflation. There continues to be uncertainty whether the Acts will increase the cost of employee health plan coverage. Continued significant annual increases in the cost of providing employee health coverage may adversely affect our business and results of operations.

Unanticipated changes in our tax provisions or exposure to additional income tax liabilities could affect our financial condition and profitability.

We are subject to income taxes in both the United States and foreign jurisdictions. Significant judgment is required in determining our worldwide provision for income taxes. Changes in estimates of projected future operating results, loss of deductibility of items, recapture of prior deductions (including related to interest on convertible notes), or changes in assumptions regarding our ability to generate future taxable income could result in significant increases to our tax expense and liabilities that could adversely affect our financial condition and profitability.

If we are unable to protect our intellectual property and prevent its improper use by third parties or if third parties assert that our products or services infringe their intellectual property rights, our ability to compete in the market may be harmed, and our business and financial condition may be adversely affected.

The protection of our intellectual property is important to our business. We rely on a combination of trademarks, copyrights, patents and trade secrets to protect our intellectual property. However, these protections might be inadequate. Our pending or future trademark, copyright and patent applications might not be approved or, if allowed, might not be sufficiently broad. If our intellectual property rights are not adequately protected we may not be able to commercialize our technologies, products or services and our competitors could commercialize our technologies, which could result in a decrease in our sales and market share and could materially adversely affect our business, financial condition and results of operations. Conversely, third parties might assert that our products, services, or other business activities infringe their patents or other intellectual property rights. Infringement and other intellectual property claims and proceedings brought against us, whether successful or not, could result in substantial costs and harm our reputation. Such claims and proceedings can also distract and divert our management and key personnel from other tasks important to the success of our business. In addition, intellectual property litigation or claims could force us to cease selling or using products that incorporate the asserted intellectual property, which would adversely affect our revenues, pay substantial damages for past use of

Table of Contents

the asserted intellectual property or pay substantial fees to obtain a license from the holder of the asserted intellectual property, which license may not be available on reasonable terms, if at all. In the event of an adverse determination in an intellectual property suit or proceeding, or our failure to license essential technology or redesign our products so as not to infringe third party intellectual property rights, our sales could be harmed and our costs could increase, which could materially adversely affect our business, financial condition and results of operations.

Our share repurchase program is intended to enhance long-term shareholder value although we cannot assure this will occur and this program may be suspended or terminated at any time.

The Board of Directors has authorized our company to repurchase our common stock through a share repurchase program. Our share repurchase program may be modified, suspended or discontinued at any time without prior notice. Although the share repurchase program is intended to enhance long-term shareholder value, we cannot provide assurance that this will occur.

Payments of cash dividends on our common stock may be made only at the discretion of our board of directors and may be restricted by Oregon law.

Any decision to pay dividends will be at the discretion of our Board of Directors and will depend upon our operating results, strategic plans, capital requirements, financial condition, provisions of our borrowing arrangements and other factors our Board of Directors considers relevant. Furthermore, Oregon law imposes restrictions on our ability to pay dividends. Accordingly, we may not be able to continue to pay dividends in any given amount in the future, or at all.

Table of Contents

None.

We operate at the following primary facilities as of August 31, 2015:

We believe that our facilities are in good condition and that the facilities, together with anticipated capital improvements and additions, are adequate to meet our operating needs for the foreseeable future. We continually evaluate our facilities in order to remain competitive and to take advantage of market opportunities.

Table of Contents

There is hereby incorporated by reference the information disclosed in Note 22 to Consolidated Financial Statements, Part II, Item 8 of this Form 10-K.

Not applicable.

Table of Contents

Our common stock has been traded on the New York Stock Exchange under the symbol GBX since July 14, 1994. There were approximately 366 holders of record of common stock as of October 23, 2015. The following table shows the reported high and low sales prices of our common stock on the New York Stock Exchange for the fiscal periods indicated.

Dividends

In July 2014, the Board of Directors authorized the reinstatement of our company’s dividend program. There is no assurance as to the payment of future dividends as they are dependent upon future earnings, capital requirements, customary debt covenant restrictions and our financial condition.

Issuer Purchases of Equity Securities

In October 2013, the Board of Directors authorized our company to repurchase up to $50 million of our common stock. We completed this share repurchase program in October 2014. In October 2014, the Board of Directors authorized a new share repurchase program for us to repurchase up to an additional $50 million of our common stock. In January 2015, the Board of Directors authorized a $25 million increase to the October 2014 share repurchase program and in October 2015, the Board of Directors authorized an additional $100 million increase to the October 2014 repurchase program, bringing the total to $175 million. The share repurchase program expiration was extended from June 30, 2016 to January 1, 2018, but may be modified, suspended or discontinued at any time without prior notice. Under the share repurchase programs, shares of common stock may be purchased on the open market or through privately negotiated transactions from time-to-time. The timing and amount of purchases will be based upon market conditions, securities law limitations and other factors. The share repurchase programs do not obligate us to acquire any specific number of shares in any period.

Table of Contents

Shares repurchased under these share repurchase programs in aggregate during the three months ended August 31, 2015 were as follows:

Performance Graph

The following graph demonstrates a comparison of cumulative total returns for the Company’s Common Stock, the Dow Jones US Industrial Transportation Index and the Standard & Poor’s (S&P) 500 Index. The graph assumes an investment of $100 on August 31, 2010 in each of the Company’s Common Stock and the stocks comprising the indices. Each of the indices assumes that all dividends were reinvested and that the investment was maintained to and including August 31, 2015, the end of the Company’s 2015 fiscal year.

The comparisons in this table are required by the SEC, and therefore, are not intended to forecast or be indicative of possible future performance of our Common Stock.

Table of Contents

Equity Compensation Plan Information

Equity Compensation Plan Information is hereby incorporated by reference to the “Equity Compensation Plan Information” table in Registrant’s definitive Proxy Statement to be filed pursuant to Regulation 14A, which Proxy Statement is anticipated to be filed with the Securities and Exchange Commission within 120 days after the end of the Registrant’s year ended August 31, 2015.

Table of Contents

Table of Contents

Executive Summary

We operate in four reportable segments: Manufacturing; Wheels & Parts; Leasing & Services; and GBW Joint Venture. Our segments are operationally integrated. The Manufacturing segment, operating from facilities in the United States, Mexico and Poland, produces double-stack intermodal railcars, tank cars, conventional railcars, automotive railcar products and marine vessels. The Wheels & Parts segment performs wheel and axle servicing, as well as production of a variety of parts for the railroad industry in North America. The Leasing & Services segment owns approximately 9,300 railcars (6,300 railcars held as equipment on operating leases, 2,800 held as leased railcars for syndication and 200 held as finished goods inventory) and provides management services for approximately 260,000 railcars for railroads, shippers, carriers, institutional investors and other leasing and transportation companies in North America. The GBW Joint Venture segment provides Repair services through 33 shops throughout North America, 12 of which are currently tank car certified by the AAR. The results of these operations were included as part of Earnings (loss) from unconsolidated affiliates as we account for our interest in GBW under the equity method of accounting. We also produce rail castings and tank heads through unconsolidated joint ventures and have a 19.5% ownership stake in a railcar manufacturer in Brazil with an option to acquire an additional 40.5% ownership interest which can be exercised no later than December 30, 2017.

Our total manufacturing backlog of railcar units as of August 31, 2015 was approximately 41,300 units with an estimated value of $4.71 billion of which 36,000 units with a value of $4.24 billion are for direct sales and 5,300 units with a value of $0.47 billion are intended for syndications to third parties with a lease attached. Backlog as of August 31, 2014 was 31,500 units with an estimated value of $3.33 billion. Currently no orders in our backlog are intended to be placed into our owned lease fleet. Multi-year supply agreements are a part of rail industry practice. A portion of the orders included in backlog reflects an assumed product mix. Under terms of the orders, the exact mix will be determined in the future which may impact the dollar amount of backlog. Marine backlog as of August 31, 2015 was $52 million compared to $112 million as of August 31, 2014.

Our backlog of railcar units and marine vessels is not necessarily indicative of future results of operations. Certain orders in backlog are subject to customary documentation and completion of terms. Customer orders contain terms and conditions customary in the industry. Customers may attempt to cancel or modify orders in backlog. In most cases, little variation has been experienced between the quantity ordered and the quantity actually delivered, though the timing of deliveries may be modified from time to time.

Table of Contents

Overview

Revenue, cost of revenue, margin and operating profit presented below, include amounts from external parties and exclude intersegment activity that is eliminated in consolidation.

Performance for our segments is evaluated based on operating profit. Corporate includes selling and administrative costs not directly related to goods and services and certain costs that are intertwined among segments due to our integrated business model. Management does not allocate Interest and foreign exchange or Income tax expense for either external or internal reporting purposes.

Table of Contents

Consolidated Results

Through our integrated business model, we provide a broad range of custom products and services in each of our segments which have various average selling prices and margins. The demand for and mix of products and services delivered changes from year to year which causes fluctuations in our results of operations.

The 18.2% increase in revenue for the year ended August 31, 2015 as compared to the year ended August 31, 2014 was primarily due to a 31.5% increase in Manufacturing revenue. The increase in Manufacturing revenue was primarily due to a 30% increase in the volume of deliveries in response to strong demand in the freight car market and an increase in marine activity as compared to the prior comparable period. The increase in revenue also included a 17.5% increase in Leasing & Services revenue which was primarily the result of a higher average volume of rent-producing leased railcars for syndication. These were partially offset by a 25.1% decrease in Wheels & Parts revenue primarily due to 2015 excluding repair revenue as a result of contributing our Repair business to GBW, while 2014 included repair revenue through July 18, 2014.

The 9.9% increase in cost of revenue for the year ended August 31, 2015 as compared to the year ended August 31, 2014 was primarily due to a 23.1% increase in Manufacturing cost of revenue. The increase in Manufacturing cost of revenue was primarily due to an increase of 30% in the volume of railcar deliveries with a mix which had a lower average labor and material content. This was partially offset by improved production efficiencies and favorable foreign currency exchange rates. The increase in Manufacturing cost of revenue was partially offset by a 27.9% decrease in Wheels & Parts cost of revenue primarily due to 2015 excluding repair cost of revenue as a result of contributing our Repair business to GBW, while 2014 included repair cost of revenue through July 18, 2014. In addition, the increase in Manufacturing cost of revenue was partially offset by a 4.5% decrease in Leasing & Services cost of revenue. This was primarily due to lower transportation costs and a decrease in the cost of revenue associated with purchased railcars that were sold.

Margin as a percentage of revenue was 20.6% and 14.6% for the years ended August 31, 2015 and 2014, respectively. The overall 6.0% increase in margin percentage was due to an increase in margin in all three of our consolidated segments. Manufacturing margin increased to 20.8% for 2015 compared to 15.4% for 2014 primarily due to favorable pricing, improved production efficiencies and favorable foreign currency exchange rates. In addition, 2015 had higher volumes of new railcar sales with leases attached which typically result in higher sales prices and margins. Wheels & Parts margin increased to 9.8% for 2015 compared to 6.4% for 2014, primarily as the result of 2015 excluding the results of our Repair operations which in the recent past have had lower margins as a percentage of revenue than the rest of the segment. Leasing & Services margin increased to 57.3% for 2015 compared to 47.5% for 2014 which was primarily the result of a higher average volume of rent-producing leased railcars for syndication as compared to the prior year and lower transportation costs.

The $80.9 million increase in net earnings for the year ended August 31, 2015 as compared to the year ended August 31, 2014 was primarily attributable to an increase in margin. This was partially offset by an increase in selling and administrative expense as compared to the prior year and a Gain on contribution to joint venture in 2014.

Table of Contents

The 25.5% increase in revenue for the year ended August 31, 2014 as compared to the year ended August 31, 2013 was primarily due to a 33.7% increase in Manufacturing revenue which accounted for 91% of the total revenue increase. The increase in Manufacturing revenue was primarily due to a higher volume of deliveries due to strong demand in the freight car market and our increased product diversification. Growth in revenues in Wheels & Parts and Leasing & Services of approximately 5.6% and 16.7% respectively also contributed to the year-over-year increase in consolidated revenue.

The 21.4% increase in cost of revenue for the year ended August 31, 2014 as compared to the year ended August 31, 2013 was primarily due to an increase in Manufacturing cost of revenue which represented 88% of the total increase. Cost of revenue for Manufacturing increased 26.9%, primarily due to a 40% increase in railcar deliveries with a mix which had a lower average labor and material content partially offset by improved production efficiencies. Costs of revenue also increased by approximately 7.5% and 22.8% in Wheels & Parts and Leasing & Services, respectively primarily due to higher volumes.

Margin as a percentage of revenue was 14.6% and 11.7% for the years ended August 31, 2014 and 2013, respectively. The overall 2.9% increase in margin percentage was driven principally by Manufacturing margin which increased from 10.9% to 15.4% primarily due to a favorable change in product mix and improved production efficiencies. Offsetting improved margin in Manufacturing was a decline in margin in Wheels & Parts to 6.4% in 2014 from 8.0% in 2013 and a decline in margin in Leasing & Services to 47.5% in 2014 from 50.1% in 2013.

The $123.0 million increase in net earnings for the year ended August 31, 2014 as compared to the year ended August 31, 2013 was primarily attributable to a non-cash goodwill impairment charge of $71.8 million, net of tax in 2013 and an increase in Manufacturing gross margin and a non-cash Gain on contribution to joint venture of $13.6 million, net of tax both in 2014.

Manufacturing Segment

Manufacturing revenue was $2.136 billion, $1.625 billion and $1.216 billion for the years ended August 31, 2015, 2014 and 2013. Manufacturing revenue increased $511.1 million or 31.5% in 2015 compared to 2014 primarily due to a 30% increase in the volume of deliveries in response to strong demand in the freight car market and an increase in marine activity as compared to the prior comparable period. Manufacturing revenue increased $409.2 million or 33.7% in 2014 compared to 2013 primarily due to a 40% increase in the volume of deliveries with a mix that had a lower average selling price as compared to 2013. These higher deliveries were a result of improved efficiencies and an increase in capacity in response to higher demand in the freight car market and our increased product diversification compared to 2013.