GSI TECHNOLOGY INC - Annual Report: 2021 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

​

FORM 10-K

​

​

For the fiscal year ended March 31, 2021

​

or

​

​

For the transition period from            to

​

Commission File Number 001-33387

​

GSI Technology, Inc.

(Exact name of registrant as specified in its charter)

​

​

1213 Elko Drive

Sunnyvale, California 94089

(Address of principal executive offices, zip code)

​

(408) 331-8800

(Registrant’s telephone number, including area code)

​

​

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐    No ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐    No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒    No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒    No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Act. (Check one):

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes  ☐    No ☒

The aggregate market value of the registrant’s voting stock held by non-affiliates of the registrant, based upon the closing sale price of the common stock on September 30, 2020, as reported on the Nasdaq Global Market, was approximately $101.7 million. Shares of the registrant’s common stock held by each officer and director and each person who owns 10% or more of the outstanding common stock of the registrant have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes. As of May 31, 2021, there were 24,156,470 shares of the registrant’s common stock issued and outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s definitive proxy statement for its 2021 annual meeting of stockholders are incorporated by reference into Part III hereof.

​

Table of Contents

GSI TECHNOLOGY, INC.

2021 FORM 10-K ANNUAL REPORT

TABLE OF CONTENTS

​

​

2

Table of Contents

Forward-looking Statements

In addition to historical information, this Annual Report on Form 10-K includes forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). These forward-looking statements involve risks and uncertainties. Forward-looking statements are identified by words such as “anticipates,” “believes,” “expects,” “intends,” “may,” “will,” and other similar expressions. In addition, any statements which refer to expectations, projections, or other characterizations of future events or circumstances are forward-looking statements. Actual results could differ materially from those projected in the forward-looking statements as a result of a number of factors, including those set forth in this report under “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Risk Factors,” those described elsewhere in this report, and those described in our other reports filed with the Securities and Exchange Commission (“SEC”). We caution you not to place undue reliance on these forward-looking statements, which speak only as of the date of this report, and we undertake no obligation to update these forward-looking statements after the filing of this report. You are urged to review carefully and consider our various disclosures in this report and in our other reports publicly disclosed or filed with the SEC that attempt to advise you of the risks and factors that may affect our business.

PART I

Item 1.     Business

Overview

For many years we have developed and marketed high performance memory products, including “Very Fast” static random access memory, or SRAM, that are incorporated primarily in high-performance networking and telecommunications equipment, such as routers, switches, wide area network infrastructure equipment, wireless base stations and network access equipment. We sell these products to leading original equipment manufacturer, or OEM, customers including Nokia. In addition, we serve the ongoing needs of the military, aerospace, industrial, test and measurement equipment, automotive and medical markets for high-performance SRAMs. Based on the performance characteristics of our products and the breadth of our product portfolio, we consider ourselves to be a leading provider of Very Fast SRAMs. We utilize a fabless business model, which allows us both to focus our resources on research and development, product design and marketing, and to gain access to advanced process technologies with only modest capital investment and fixed costs.

Beginning in November 2015 with the acquisition of an Israeli company, our principal strategic objective has been the development of in-place associative computing solutions for applications in evolving new markets such as “big data” (including machine learning and deep convolutional neural networks (“CNNs”)), natural language processing, computer vision, and cyber security. Our commercialization efforts for our initial Associative Processing Unit (“APU”) products are focused on applications using similarity search. Similarity search is used in visual search queries for ecommerce and molecular structure similarity search applications for drug and vaccine discovery. Our extensive experience in developing high speed synchronous SRAMs enhances our ability to develop hardware artificial intelligence (AI) products and solutions with long term reliability. Even as we develop in-place associative computing solutions, we continue to be committed to the synchronous SRAM market, supplying both exceedingly high densities not available elsewhere, and robust high-quality radiation-tolerant and radiation-hardened space grade parts.

We were incorporated in California in 1995 under the name Giga Semiconductor, Inc. We changed our name to GSI Technology in December 2003 and reincorporated in Delaware in June 2004 under the name GSI Technology, Inc. Our principal executive offices are located at 1213 Elko Drive, Sunnyvale, California, 94089, and our telephone number is (408) 331-8800.

3

Table of Contents

Industry and Market Background

Associative Processing Unit Computing Markets

With the vast amount of data currently being generated and the demand for faster processing of that data, processor speeds are continuing to increase. However, existing systems that move data back and forth between the processor and memory are not able to provide the fast response times required by real time “big data” applications. Faster response times are also needed to meet the demands of developers in such markets as cyber security and computer vision. For example, in the automotive market, advanced driver assistance systems require a tremendous amount of image processing to be accomplished in real time.

Our commercialization efforts for the APU product are initially focused on similarity search applications and other applications that can leverage the math-in-place capabilities of the APU. We see demand for the APU in artificial intelligence applications, including approximate nearest neighbor searches, natural language processing, cryptography, and synthetic aperture radar as well as other fields where the technology’s superior speed at a very low power consumption is needed.

Similarity search uses a technique called distance metric learning, in which learning algorithms measure how similar or related objects are. Our APU is well suited for very fast similarity search because its design enables distance metric learning using fast computation speeds with high degrees of accuracy. Our APU is further differentiated from other solutions in the market by its scalability for very large datasets. The use of visual search, a subset of similarity search, is forecasted to grow rapidly as AI is adopted by the online retail industry. The APU has demonstrated the ability to increase the rate of computation for visual search by orders of magnitude with greater accuracy and reduced power consumption. This kind of performance has the potential to transform online retailers’ capabilities to run search queries and improve customers’ online shopping experience.

The APU’s higher speeds and increased accuracy in similarity search has been shown to speed drug discovery, which can potentially lower drug discovery costs, an important consideration for research organizations dependent on funding. The APU is well suited for enhancing drug discovery work because it can perform similarity searches using very descriptive molecular representations in a virtual environment. This can significantly reduce the cost of developing drugs by allowing virtual screening and requires less use of physical laboratories. Use of AI products like the APU could reduce costs, increase drug efficacy and safety, and increase speed to market thereby potentially saving billions of dollars. For these reasons, the APU is drawing interest from prospective customers in the pharmaceutical and genomics industries.

Our associative computing technology utilizes in-memory associative processor structures to address the bottlenecks that limit performance and increase power consumption in CPUs, GPUs, and FPGAs when processing large datasets. By constantly having to move operands and results in and out of devices with ever increasing processing speeds and bus speeds, current solutions are focused on memory transfers rather than addressing the basic computation problem. By changing the computational framework to parallel processing and having search functions conducted directly in a processing memory array, the APU has the potential to greatly expedite computation and response times in “big data” applications. We believe that our state-of-the-art circuit design expertise will enable us to develop high-quality associative processors based upon our patented, in-place associative computing technology and algorithms. We are creating a new category of computing products that are expected to have substantial target markets and a large new customer base in those markets. Our associative computing products have shown to improve system performance, reduce query response times from hours to seconds and at the same time significantly reduce power consumption and system cost.

4

Table of Contents

New Markets for the APU

The APU is capable of processing large data arrays without having to simultaneously transfer data and input new data. Not only does this capability provide a very cost competitive solution for large database similarity search, but the mathematical capabilities of the APU also create new opportunities for using real-time causal processing. Furthermore, GSI’s expertise in developing radiation-tolerant components creates new opportunities in the growing market for AI products that can be used in low earth orbit and space applications, where other AI products are not able to survive the harsh environment. These are all additional markets experiencing growth that could benefit from our technology.

APU Board Level Product

Our APU technology is currently being used in the medical industry, and is being evaluated in digital signal processing, face recognition, and cybersecurity markets. Our current product is a half-length PCIe card that will fit into a blade, rack, or desktop server. There is a higher capability full length card being introduced this year and as part of our strategy to expand the total addressable market for our board product, GSI is developing other form factors and product configurations.

High-Speed Synchronous SRAM Market Overview

Over the past 20 years, the demand for high-speed synchronous SRAMs has been dominated by the networking and telecom industry, which incorporates SRAM into high-performance routers, switches, and other end-products. The networking and telecom industry’s demand for high-speed synchronous SRAMs has accounted for more than 70% of the total addressable market while the remaining market consisted of military/defense and aerospace applications, audio/video processing, test and measurement equipment, medical and automotive applications, and other miscellaneous applications.

However, for the past decade the networking and telecom market demand for high-speed synchronous SRAMs has been steadily declining due to the industry trend of embedding greater amounts of SRAM into each generation of ASICs/controllers products, thereby reducing the need for external SRAMs. We expect this decline in demand from the networking and telecom market to continue. As a result, the demand for external high-speed synchronous SRAMs in new end-products is being driven by what had previously been considered secondary markets, the greatest of those being military/defense and aerospace applications. Such applications require a combination of high densities and high random transaction rates that GSI is well positioned to serve, being the only SRAM manufacturer to offer 288Mb densities as well as offering the highest truly random transaction rate in the industry – 1866 million transactions per second (MT/s). To further serve the military/defense and aerospace markets, GSI has been focusing on qualifying its products for space/satellite applications to capitalize on opportunities resulting from the development of near-earth orbiting satellite mega constellations, as well as the more traditional geo-stationary earth orbit satellite communication platforms and national assets.

High-Speed Synchronous SRAM Products

We offer four families of high-speed synchronous SRAMs – SyncBurst™, NBT™, SigmaQuad™, and SigmaDDR™. They feature high density, high transaction rate, high data bandwidth, low latency, and low power consumption. We commit to offering our products for longer periods of time than our competitors, typically ten years or more following their initial introduction, including die shrinks.

These four product families provide the basis for approximately 10,000 individual part numbers. They are available in several density and data width configurations and are available in a variety of performance, feature, temperature, and package options. Our products can be found in a wide range of networking and

5

Table of Contents

telecommunications equipment, including core routers, multi-service access routers, universal gateways, enterprise edge routers, service provider edge routers, optical edge routers, fast Ethernet switches and wireless base stations. We also sell our products to OEMs that manufacture products for military and aerospace applications such as radar and guidance systems and satellites, for professional audio applications such as sound mixing systems, for test and measurement applications such as high-speed testers, for automotive applications such as smart cruise control, and for medical applications such as ultrasound and CAT scan equipment.

Synchronous SRAM timing is controlled by a clock that defines its operating frequency. Some are “common I/O” (common input/output data bus), and some are “separate I/O” (separate input and output data busses). Additionally, some are “single data rate” (SDR), in which one unit of data is transferred per clock cycle, and some are “double data rate” (DDR), in which two units of data are transferred per clock cycle. The “Quad” in our SigmaQuad product name refers to its ability to send and receive DDR data simultaneously, in the same clock cycle.

SyncBurst™ and NBT™ SRAMs.     Synchronous Burst (SyncBurst) and No Bus Turnaround (NBT) SRAMs implement a common I/O, SDR bus protocol. SyncBurst SRAMs were originally developed for microprocessor cache applications, but eventually migrated to many diverse applications. NBT SRAMs are offshoots of the SyncBurst SRAM architecture and were developed specifically to address the needs of networking and telecom applications. They feature a bus protocol designed to minimize or eliminate idle cycles when switching between read and write operations. Both families can perform burst data transfers or single data transfers at the discretion of the user. Both families come with pipeline and flow-through mode options.

Our SyncBurst and NBT SRAMs are available in densities from 4 Mb to 288 Mb (four times greater than the nearest competition), with operating frequencies up to 400 MHz (up to sixty percent greater than other suppliers). They can be operated with supply voltages of 1.8V, 2.5V, or 3.3V.

SigmaQuad™ and SigmaDDR™ Products.    SigmaQuad SRAMs implement a separate I/O, DDR bus protocol, while SigmaDDR SRAMs implement a common I/O, DDR bus protocol. They were developed specifically to meet the rapidly growing density and random transaction rate requirements of networking and telecom applications, requirements that NBT SRAMs are unable to meet, and have been used extensively in those markets for the past 15 years. They include the highest performance SRAMs available in the market today, with random transaction rates up to 1866 MT/s – forty percent greater than the nearest competition. Both product families have burst-of-2 and burst-of-4 options.

We have developed several generations of SigmaQuad and SigmaDDR SRAMs, with increasing performance capability, referred to as Type-I, Type-II, Type-II+, Type-IIIe, and Type-IVe. They are available in densities from 18Mb to 288Mb (two times greater than the nearest competition), with operating frequencies up to 1333 MHz. They can be operated with a range of supply voltages depending on the generation.

RadHard and RadTolerant SRAM Products. We have committed to introduce and market radiation-hardened, or “RadHard”, and radiation-tolerant, or “RadTolerant”, SRAMs for aerospace and military applications such as networking satellites and missiles. Our initial RadHard and RadTolerant products are 288 megabit, 144 megabit, and 72 megabit devices from our SigmaQuad-II+ family. We have also expanded to include 144 megabit, 72 megabit, and 32 megabit SyncBurst and NBT SRAMs RadTolerant products to enable the avionics and other space platforms that have historically leveraged smaller asynchronous devices. The RadHard products are housed in a hermetically-sealed ceramic column grid array package, and undergo a special fabrication process that diminishes the adverse effects of high-radiation environments.

6

Table of Contents

The GSI Solution

Continue Leadership in the High Performance Memory Market

We endeavor to address the overall needs of our OEM customers, not only satisfying their immediate requirements for our latest generation, highest performance networking memory, but also providing them with the ongoing long-term support necessary during the entire lives of the systems in which our products are utilized. Accordingly, the key elements of our solution include:

● Product Performance Leadership. Through the use of advanced architectures and design methodologies, we have developed high-performance SRAM products offering superior high speed performance capabilities and low power consumption, while our advanced silicon process technologies allow us to optimize yields, lower manufacturing costs and improve quality.

​

● Product Innovation. We believe that we have established a position as a technology leader in the design and development of Very Fast SRAMs. We are believed to have the industry’s highest density RadHard SRAM, the SigmaQuad-II+, which is an example of our industry-leading product innovation.

​

● Broad and Readily Available Product Portfolio. We have what we believe is the broadest catalog of Very Fast SRAM products.

​

● Master Die Methodology. Our master die methodology enables multiple product families, and variations thereof, to be manufactured from a single mask set so that we are able to maintain a common pool of wafers that incorporate all available master die, allowing rapid fulfillment of customer orders and reducing costs.

​

● Customer Responsiveness. We work closely with leading networking and telecommunications OEMs, as well as their chip-set suppliers, to anticipate their requirements and to rapidly develop and implement solutions that allow them to meet their specific product performance objectives.

​

The GSI Strategy

Our objective is to profitably increase our market share in the markets that we serve, while developing transformative new products utilizing our cutting-edge in-place associative computing technology. Our strategy includes the following key elements:

● Complete productization of our initial In-place Associative Computing product. Our principal operations objective is the completion of productization efforts for our initial in-place associative computing product. We are on-track to complete this productization work in calendar 2021.

​

​

​

● Exploit opportunities to expand the market for our SRAM products. While we developed our high-performance SRAM products principally for the networking and telecom markets, they are often applicable across a wide range of industries and applications. We have experienced growth in product

7

Table of Contents

sales for military, industrial, test and measurement, and medical markets and intend to continue penetrating these and other new markets with similar needs for high-performance SRAM technologies.

​

● Collaborate with wafer foundry to leverage leading-edge process technologies. We will continue to utilize CMOS fabrication process technologies from TSMC to design our products.

​

● Seek new market opportunities. We intend to supplement our internal development activities by seeking additional opportunities to acquire other businesses, product lines or technologies, or enter into strategic partnerships, that would complement our current product lines, expand the breadth of our markets, enhance our technical capabilities, or otherwise provide growth opportunities.

​

Customers

Historically, our primary sales and marketing strategy has been to achieve design wins with leading OEMs in the networking and telecommunications markets and the other markets we serve. With the development of our new in-place associative computing products, we are focusing sales and marketing efforts in the markets for “big data” (including CNNs), natural language processing, computer vision and cyber security with our initial focus in this area being for similarity search applications including facial recognition, drug discovery and drug toxicity, signal and object detection and cryptography.

The following is a representative list of our OEM customers that directly or indirectly purchased more than $500,000 of our SRAM products in the fiscal year ended March 31, 2021:

​

Many of our OEM customers use contract manufacturers to assemble their equipment. Accordingly, a significant percentage of our net revenues is derived from sales to these contract manufacturers and to consignment warehouses who purchase products from us for use by contract manufacturers. In addition, we sell our products to OEM customers indirectly through domestic and international distributors.

In the case of sales of our products to distributors and consignment warehouses, the decision to purchase our products is typically made by the OEM customers. In the case of contract manufacturers, OEM customers typically provide a list of approved products to the contract manufacturer, which then has discretion whether or not to purchase our products from that list.

Direct sales to contract manufacturers and consignment warehouses accounted for 43.7%, 33.7% and 41.3% of our net revenues for fiscal 2021, 2020 and 2019, respectively. Sales to foreign and domestic distributors accounted for 54.7%, 61.3% and 56.0% of our net revenues for fiscal 2021, 2020 and 2019, respectively.

8

Table of Contents

The following direct customers accounted for 10% or more of our net revenues in one or more of the following periods:

​

Nokia was our largest customer in fiscal 2021, 2020 and 2019. Nokia purchases products directly from us and through contract manufacturers and distributors. Based on information provided to us by its contract manufacturers and our distributors, purchases by Nokia represented approximately 39%, 38% and 45% of our net revenues in fiscal 2021, 2020 and 2019, respectively. To our knowledge, none of our other OEM customers accounted for more than 10% of our net revenues in any of these periods.

Sales, Marketing and Technical Support

We sell our products primarily through our worldwide network of independent sales representatives and distributors. As of March 31, 2021, we employed 18 sales and marketing personnel, and were supported by over 200 independent sales representatives, which we believe will enable us to address an expanded customer base with the continuing introduction of our associative computing products in fiscal 2022. We believe that our relationship with our U.S. distributor, Avnet, puts us in a strong position to address the Very Fast SRAM memory market in the United States. We currently have regional sales offices located in Canada, China, Hong Kong, Israel and the United States. We believe this international coverage allows us to better serve our distributors and OEM customers by providing them with coordinated support. We believe that our customers’ purchasing decisions are based primarily on product performance, availability, features, quality, reliability, price, manufacturing flexibility and service. Many of our OEM customers have had long-term relationships with us based on our success in meeting these criteria.

Our sales are generally made pursuant to purchase orders received between one and six months prior to the scheduled delivery date. Because industry practice allows customers to reschedule or cancel orders on relatively short notice, these orders are not firm and hence we believe that backlog is not a good indicator of our future sales. We have recently experienced price increases for raw materials and manufacturing services due to the tightness in the semiconductor market and have responded with increased pricing to our customers. We typically provide a warranty of up to 36 months on our products. Liability for a stated warranty period is usually limited to replacement of defective products.

Our marketing efforts are, first and foremost, focused on ensuring that the products we develop meet or exceed our customers’ needs. Historically, those efforts have been focused on defining our high-performance SRAM product roadmap by working closely with key customers to understand their roadmaps and to ensure that the products we develop meet their requirements (primary aspects of which include functionality, performance, electrical interfaces, power, and schedule). More recently, our marketing efforts have been expanded to include marketing the new in-place associative computing products that we are developing. Our marketing group also provides technical, strategic and tactical sales support to our direct sales personnel, sales representatives and distributors. This support includes in-depth product presentations, datasheets, application notes, simulation models,

9

Table of Contents

sales tools, marketing communications, marketing research, trademark administration and other support functions. We also engage in various marketing activities to increase brand awareness.

We emphasize customer service and technical support in an effort to provide our OEM customers with the knowledge and resources necessary to successfully use our products in their designs. Our customer service organization includes a technical team of applications engineers, technical marketing personnel and, when required, product design engineers. We provide customer support throughout the qualification and sales process and continue providing follow-up service after the sale of our products and on an ongoing basis. In addition, we provide our OEM customers with comprehensive datasheets, application notes and reference designs and access to our FPGA controller IP for use in their product development.

Manufacturing

We outsource our wafer fabrication, assembly and wafer sort testing, which enables us to focus on our design strengths, minimize fixed costs and capital expenditures and gain access to advanced manufacturing technologies. Our engineers work closely with our outsource partners to increase yields, reduce manufacturing costs, and help assure the quality of our products.

Currently, all of our SRAM and APU wafers are manufactured by TSMC under individually negotiated purchase orders. We do not currently have a long-term supply contract with our foundry, and, therefore, TSMC is not obligated to manufacture products for us for any specified period, in any specified quantity or at any specified price, except as may be provided in a particular purchase order. Our future success depends in part on our ability to secure sufficient capacity at TSMC or other independent foundries to supply us with the wafers we require.

The majority of our current SRAM products are manufactured using 0.13 micron, 90 nanometer, 65 nanometer and 40 nanometer process technologies on 300 millimeter wafers at TSMC. Our current in-place associative computing products are manufactured at TSMC using 28 nanometer process technology.

Our master die methodology enables multiple product families, and variations thereof, to be manufactured from a single mask set. As a result, based upon the way available die from a wafer are metalized, wire bonded, packaged and tested, we can create a number of different products. The manufacturing process consists of two phases, the first of which takes approximately eight to twelve weeks and results in wafers that have the potential to yield multiple products within a given product family. After the completion of this phase, the wafers are stored pending customer orders. Once we receive orders for a particular product, we perform the second phase, consisting of final wafer processing, assembly, burn-in and test, which takes approximately ten to eighteen weeks to complete. This two-step manufacturing process enables us to significantly shorten our product lead times, providing flexibility for customization and to increase the availability of our products.

All of our manufactured wafers, including wafers for our APU product, are tested for electrical compliance and most are packaged at Advanced Semiconductor Engineering, or ASE, which is located in Taiwan. Our test procedures require that all of our products be subjected to accelerated burn-in and extensive functional electrical testing which is performed at our Taiwan and U.S. test facilities. Our radiation-hardened products are assembled and tested at STS, located near our Sunnyvale, California headquarters facility.

Research and Development

We have devoted substantial resources in the last five years on the development of a new category of in-place associative computing products. Our research and development staff includes engineering professionals with extensive experience in the areas of high-speed circuit design, including SRAM design, DRAM design and systems level networking and telecommunications equipment design, and are well suited for the development of our

10

Table of Contents

associative computing products. Additionally, we have assembled a team of software development experts in Israel needed for the development of the various levels of software required in the use of our associative computing products. The design process for our products is complex. As a result, we have made substantial investments in computer-aided design and engineering resources to manage our design process.

Competition

Our existing and potential competitors include many large domestic and international companies, some of which have substantially greater resources, offer other types of memory and/or non-memory technologies and may have longer standing relationships with OEM customers than we do. Unlike us, some of our principal competitors maintain their own semiconductor fabs, which may, at times, provide them with capacity, cost and technical advantages.

Our principal competitors include Cypress Semiconductor (Infineon Technologies AG), Integrated Silicon Solution, Micron and REC for our SRAM products. NVIDIA Corporation and Intel Corporation are prospective competitors for our in-place associative computing products. Other competitors are expected to enter this field as well. While some of our competitors offer a broader array of products and offer some of their products at lower prices than we do, we believe that our focus on performance leadership provides us with key competitive advantages.

We believe that our ability to compete successfully in the rapidly evolving markets for “big data” and memory products for the networking and telecommunications markets depends on a number of factors, including:

● product performance, features, quality, reliability and price;

● manufacturing flexibility, product availability and customer service throughout the lifetime of the product;

● the timing and success of new product introductions by us, our customers and our competitors; and

● our ability to anticipate and conform to new industry standards.

We believe we compete favorably with our competitors based on these factors. However, we may not be able to compete successfully in the future with respect to any of these factors. Our failure to compete successfully in these or other areas could harm our business.

The market for networking memory products is competitive and is characterized by technological change, declining average selling prices and product obsolescence. Competition could increase in the future from existing competitors and from other companies that may enter our existing or future markets with solutions that may be less costly or provide higher performance or more desirable features than our products. This increased competition may result in price reductions, reduced profit margins and loss of market share.

In addition, we are vulnerable to advances in technology by competitors, including new SRAM architectures as well as new forms of DRAM and other new memory technologies. Because we have limited experience developing IC products other than Very Fast SRAMs, any efforts by us to introduce new products based on new technology, including our new in-place associative computing products, may not be successful and, as a result, our business may suffer.

11

Table of Contents

Intellectual Property

Our ability to compete successfully depends, in part, upon our ability to protect our proprietary technology and information. We rely on a combination of patents, copyrights, trademarks, trade secret laws, non-disclosure and other contractual arrangements and technical measures to protect our intellectual property. We believe that it is important to maintain a large patent portfolio to protect our innovations. We currently hold 113 United States patents, including 62 memory patents and 51 associative computing patents, and have in excess of a dozen patent applications pending. We cannot assure you that any patents will be issued as a result of our pending applications. We believe that factors such as the technological and creative skills of our personnel and the success of our ongoing product development efforts are also important in maintaining our competitive position. We generally enter into confidentiality or license agreements with our employees, distributors, customers and potential customers and limit access to our proprietary information. Our intellectual property rights, if challenged, may not be upheld as valid, may not be adequate to prevent misappropriation of our technology or may not prevent the development of competitive products. Additionally, we may not be able to obtain patents or other intellectual property protection in the future. Furthermore, the laws of certain foreign countries in which our products are or may be developed, manufactured or sold, including various countries in Asia, may not protect our products or intellectual property rights to the same extent as do the laws of the United States and thus make the possibility of piracy of our technology and products more likely in these countries.

The semiconductor industry is characterized by vigorous protection and pursuit of intellectual property rights, which have resulted in significant and often protracted and expensive litigation. We or our foundry from time to time are notified of claims that we may be infringing patents or other intellectual property rights owned by third parties. We have been involved in patent infringement litigation in the past. We have been subject to other intellectual property claims in the past and we may be subject to additional claims and litigation in the future. Litigation by or against us relating to allegations of patent infringement or other intellectual property matters could result in significant expense to us and divert the efforts of our technical and management personnel, whether or not such litigation results in a determination favorable to us. In the event of an adverse result in any such litigation, we could be required to pay substantial damages, cease the manufacture, use and sale of infringing products, expend significant resources to develop non-infringing technology, discontinue the use of certain processes or obtain licenses to the infringing technology. Licenses may not be offered or the terms of any offered licenses may not be acceptable to us. If we fail to obtain a license from a third party for technology used by us, we could incur substantial liabilities and be required to suspend the manufacture of products or the use by our foundry of certain processes.

Human Capital Resources

As of March 31, 2021, we had 178 full-time employees, including 110 engineers, of which 88 are engaged in research and development and 52 have PhD or MS degrees, 18 employees in sales and marketing, 10 employees in general and administrative capacities and 66 employees in manufacturing. Of these employees, 62 are based in our Sunnyvale facility, 59 are based in our Taiwan facility and 42 are based in our Israel facility. We believe that our future success will depend in large part on our ability to attract and retain highly-skilled, engineering, managerial, sales and marketing personnel. Our employees are not represented by any collective bargaining unit, and we have never experienced a work stoppage. We believe that our employee relations are good.

Compensation and benefits

​

Our goal is to attract, motivate and retain talent with a focus on encouraging performance, promoting accountability and adhering to our company values. We offer competitive compensation and benefit programs including a 401(k) Plan, stock options for all employees, flexible spending accounts and paid time off.

12

Table of Contents

Diversity, inclusion and belonging

​

We are committed to our continued efforts to increase diversity and foster an inclusive work environment that supports the global workforce and the communities we serve. We recruit the best people for the job regardless of gender, ethnicity or other protected traits and it is our policy to fully comply with all laws applicable to discrimination in the workplace. Our diversity, equity and inclusion principles are also reflected in our employee training and policies. We continue to enhance our diversity, equity and inclusion policies which are guided by our executive leadership team.

Health and safety

​

We are committed to maintain a safe and healthy workplace for our employees. Our policies and practices are intended to protect our employees and surrounding communities in which we operate.

In fiscal 2021, in response to the COVID-19 pandemic, we implemented safety protocols and new procedures to protect our employees. These protocols include complying with social distancing and other health and safety standards as required by state and local government agencies, taking into consideration guidelines of the Centers for Disease Control and Prevention and other public health authorities. In addition, we modified the way we conduct many aspects of our business including the practice of social distancing, wearing face coverings mandated by state and local regulations, and maintaining a quarantine for employees determined to be in close contact with a COVID-19 case. For example, since March 2020, except for our employees located in Taiwan, the majority of our employees have worked from home around the world. In May 2021, with the surge in COVID-19 infections in Taiwan, our employees in Taiwan have begun working from home under alternating schedules

Investor Information

You can access financial and other information in the Investor Relations section of our website at www.gsitechnology.com. We make available, on our website, free of charge, copies of our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after filing such material electronically or otherwise furnishing it to the SEC.

The charters of our Audit Committee, our Compensation Committee, and our Nominating and Governance Committee, our code of conduct (including code of ethics provisions that apply to our principal executive officer, principal financial officer, controller, and senior financial officers) and our corporate governance guidelines are also available at our website under “Corporate Governance.” These items are also available to any stockholder who requests them by calling (408) 331-8800. The contents of our website are not incorporated by reference in this report.

The SEC maintains an Internet site that contains reports, proxy statements and other information regarding issuers that file electronically with the SEC at www.sec.gov.

13

Table of Contents

Executive Officers

The following table sets forth certain information concerning our executive officers as of June 1, 2021:

Lee-Lean Shu co-founded our company in March 1995 and has served as our President and Chief Executive Officer and as a member of our Board of Directors since inception. Since October 2000, Mr. Shu has also served as Chairman of our Board. From January 1995 to March 1995, Mr. Shu was Director, SRAM Design at Sony Microelectronics Corporation, a semiconductor company and a subsidiary of Sony Corporation, and from July 1990 to January 1995, he was a design manager at Sony Microelectronics Corporation.

Didier Lasserre has served as our Vice President, Sales since July 2002. From November 1997 to July 2002, Mr. Lasserre served as our Director of Sales for the Western United States and Europe. From July 1996 to October 1997, Mr. Lasserre was an account manager at Solectron Corporation, a provider of electronics manufacturing services. From June 1988 to July 1996, Mr. Lasserre was a field sales engineer at Cypress Semiconductor Corporation, a semiconductor company.

Douglas Schirle has served as our Chief Financial Officer since August 2000. From June 1999 to August 2000, Mr. Schirle served as our Corporate Controller. From March 1997 to June 1999, Mr. Schirle was the Corporate Controller at Pericom Semiconductor Corporation, a provider of digital and mixed signal integrated circuits. From November 1996 to February 1997, Mr. Schirle was Vice President, Finance for Paradigm Technology, a manufacturer of SRAMs, and from December 1993 to October 1996, he was the Controller for Paradigm Technology. Mr. Schirle was formerly a certified public accountant.

Bor-Tay Wu has served as our Vice President, Taiwan Operations since January 1997. From January 1995 to December 1996, Mr. Wu was a design manager at Atalent, an IC design company in Taiwan.

Ping Wu has served as our Vice President, U.S. Operations since September 2006. He served in the same capacity from February 2004 to April 2006. From April 2006 to August 2006, Mr. Wu was Vice President of Operations at QPixel Technology, a semiconductor company. From July 1999 to January 2004, Mr. Wu served as our Director of Operations. From July 1997 to June 1999, Mr. Wu served as Vice President of Operations at Scan Vision, a semiconductor manufacturer.

Robert Yau co-founded our company in March 1995 and has served as our Vice President, Engineering and as a member of our Board of Directors since inception. From December 1993 to February 1995, Mr. Yau was design manager for specialty memory devices at Sony Microelectronics Corporation. From 1990 to 1993, Mr. Yau was design manager at MOSEL/VITELIC, a semiconductor company.

14

Table of Contents

Item 1A.    Risk Factors

Our future performance is subject to a variety of risks. If any of the following risks actually occur, our business, financial condition and results of operations could suffer and the trading price of our common stock could decline. Additional risks that we currently do not know about or that we currently believe to be immaterial may also impair our business operations. You should also refer to other information contained in this report, including our consolidated financial statements and related notes.

Risks Related to Our Business and Financial Condition

​

Unpredictable fluctuations in our operating results could cause our stock price to decline.

Our quarterly and annual revenues, expenses and operating results have varied significantly and are likely to vary in the future. For example, in the twelve fiscal quarters ended March 31, 2021, we recorded net revenues of as much as $14.7 million and as little as $6.6 million, including net revenues varying from $6.6 million to $7.7 million in the last four quarters and quarterly operating income of as much as $2.2 million and, in eleven quarters, operating losses, including operating losses varying from $5.2 million to $5.7 million in the last four quarters ended March 31, 2021. We therefore believe that period-to-period comparisons of our operating results are not a good indication of our future performance, and you should not rely on them to predict our future performance or the future performance of our stock price. For the last four consecutive quarters, our net revenues were adversely impacted by the COVID-19 global pandemic. In future periods, we may not have any revenue growth, or our revenues could decline or continue to be further adversely impacted by the COVID-19 global pandemic. Furthermore, if our operating expenses exceed our expectations, our financial performance could be adversely affected. Factors that may affect periodic operating results in the future include:

Our expenses are, to a large extent, fixed, and we expect that these expenses will increase in the future. We have recently experienced price increases for raw materials and manufacturing services due to the tightness in the semiconductor market. We will not be able to adjust our spending quickly if our revenues fall short of our expectations. If this were to occur, our operating results would be harmed. If our operating results in future quarters fall below the expectations of market analysts and investors, the price of our common stock could fall.

The COVID-19 global pandemic has caused increased stock market volatility and uncertainty in customer demand and the worldwide economy in general, and we may continue to experience decreased sales and revenues in the future. We expect such impact will in particular affect our SRAM sales and may also impact the launch of our

15

Table of Contents

APU product to some degree. However, the magnitude of such impact on our business and its duration is highly uncertain.

Our largest OEM customer accounts for a significant percentage of our net revenues. If this customer, or any of our other major customers, reduces the amount they purchase or stop purchasing our products, our operating results will suffer.

Nokia, our largest customer, purchases our products directly from us and through contract manufacturers and distributors. Purchases by Nokia represented approximately 39%, 38% and 45% of our net revenues in fiscal 2021, 2020 and 2019, respectively. We expect that our operating results in any given period will continue to depend significantly on orders from our key OEM customers, particularly Nokia, and our future success is dependent to a large degree on the business success of this customer over which we have no control. We do not have long-term contracts with Nokia or any of our other major OEM customers, distributors or contract manufacturers that obligate them to purchase our products. We expect that future direct and indirect sales to Nokia and our other key OEM customers will continue to fluctuate significantly on a quarterly basis and that such fluctuations may substantially affect our operating results in future periods. The decline in economic activity resulting from the COVID-19 global pandemic is expected to cause a continued reduction in orders from Nokia and our other key OEM customers. If we fail to continue to sell to our key OEM customers, distributors or contract manufacturers in sufficient quantities, our business could be harmed.

The ongoing COVID-19 global pandemic may continue to adversely affect our revenues, results of operations and financial condition.

​

Our business is expected to continue to be materially adversely affected by the COVID-19 global pandemic. National, state and local governments in affected regions have implemented, and may continue to implement, safety precautions which include quarantines, travel restrictions, business closures, cancellations of public gatherings and other measures as they deem necessary. Many organizations and individuals, including the Company and our employees, are taking additional steps to avoid or reduce infection, including limiting travel and working from home. These measures are disrupting normal business operations both in and outside of affected areas and have had significant negative impacts on businesses and financial markets worldwide.

​

We continue to monitor our operations and government recommendations and have made modifications to our normal operations because of the COVID-19 global pandemic. We have instituted many preventative measures and are regularly evaluating those measures and others as we continue to better understand our current and future operating environment. Since March 2020, except for our employees located in Taiwan, the majority of our employees have worked from home around the world. In May 2021, with the surge in COVID-19 infections in Taiwan, our Taiwan employees have begun working from home under alternating schedules. We have maintained a substantial portion of our manufacturing operational capacity at our primary manufacturing support facility located in Hsin Chu, Taiwan where our suppliers are located and where all of our products are manufactured. Since the outbreak of COVID-19, aside from the lengthening of lead times for wafers and assembly services and some price increases, we have experienced minimal impact, and continue to experience minimal impact, on our manufacturing operations in Taiwan. Final testing of our product is conducted in house. Shipping and receiving operations at our Sunnyvale headquarters facility are being maintained by a skeleton crew with minimal impact. Our revenues have been and are expected to continue to be impacted by changes in customer buying patterns and communication limitations related to COVID-19 restrictions that require a significant number of our customer contacts to work from home. We have adapted our sales strategies for the COVID-19 environment where we cannot do face-to-face meetings and conduct secure meetings with government and defense contractors.

​

We have experienced, and expect to continue to experience, a number of adverse impacts as a result of the COVID-19 global pandemic, including reductions in demand for our products, delays and cancellations of orders, difficulties in obtaining raw materials and components, shortages of labor to manufacture products, inefficiencies caused by remote worker’s difficulties in performing their normal work outputs, closures of the facilities of some of our suppliers and customers, delays in shipments and delays in collecting accounts receivable. Although it is difficult to accurately estimate the length or gravity of the impact of the COVID-19 outbreak, if the pandemic continues, it is expected to have an adverse effect on our results of operations, financial position, and liquidity during fiscal year 2022. This includes results from new information that may emerge concerning COVID-19 and any

16

Table of Contents

actions taken to contain or treat COVID-19, as well as the economic impact on local, regional, national and international customers and markets. We have made estimates of the impact of COVID-19 within our financial statements and there may be changes to those estimates in future periods.

​

The disruption to the marketplace resulting from the COVID-19 global pandemic that we continue to experience is unlike anything we have ever had to deal with. While we continue to monitor the business metrics that we have historically used to predict our financial performance, we are uncertain as to whether these metrics will operate consistently with our historical experience.

​

Disruptions in the capital markets as a result of the COVID-19 global pandemic may also adversely affect our ability to obtain additional liquidity should the impacts of the global pandemic continue for a prolonged period.

We have incurred significant losses and may incur losses in the future.

We have incurred significant losses. We incurred net losses of $21.5 million, $10.3 million and $4.5 million during fiscal 2021, 2020 and 2018, respectively. There can be no assurance that our Very Fast SRAMs will continue to receive broad market acceptance, that our new product development initiatives will be successful or that we will be able to achieve sustained revenue growth or profitability.

We depend upon the sale of our Very Fast SRAMs for most of our revenues, and a downturn in demand for these products could significantly reduce our revenues and harm our business.

We derive most of our revenues from the sale of Very Fast SRAMs, and we expect that sales of these products will represent the substantial majority of our revenues for the foreseeable future. Our business depends in large part upon continued demand for our products in the markets we currently serve, which could continue to be adversely impacted by the COVID-19 global pandemic, and adoption of our products in new markets. Market adoption will be dependent upon our ability to increase customer awareness of the benefits of our products and to prove their high-performance and cost-effectiveness. We may not be able to sustain or increase our revenues from sales of our products, particularly if the networking and telecommunications markets were to experience another significant downturn in the future. Any decrease in revenues from sales of our products could harm our business more than it would if we offered a more diversified line of products.

Our future success is substantially dependent on the successful introduction of new in-place associative computing products which entails significant risks.

Since 2015, our principal strategic objective has been the development of our first in-place associative computing product. We have devoted, and will continue to devote, substantial efforts and resources to the development of our new family of in-place associative computing products. This ongoing project involves the commercialization of new, cutting-edge technology, will require a continuing substantial effort during fiscal 2022 and beyond and will be subject to significant risks. In addition to the typical risks associated with the development of technologically advanced products (as further detailed in the next paragraph), this project will be subject to enhanced risks of technological problems related to the development of this entirely new category of products, substantial risks of delays or unanticipated costs that may be encountered, and risks associated with the establishment of entirely new markets and customer relationships. The establishment of new customer relationships and selling our in-place associative computing products to such new customers is a significant undertaking that requires us to invest heavily in our sales team, enter into new channel partner relationships, expand our marketing activities and change the focus of our business and operations. Our inability to successfully establish a market for the product that we have developed will have a material adverse effect on our future financial and business success, including our prospects for increased revenues. Additionally, if we are unable to meet the expectations of market analysts and investors with respect to this major product introduction effort, then the price of our common stock could fall.

17

Table of Contents

We are dependent on a number of single source suppliers, and if we fail to obtain adequate supplies, our business will be harmed and our prospects for growth will be curtailed.

We currently purchase several key components used in the manufacture of our products from single sources and are dependent upon supply from these sources to meet our needs. If any of these suppliers cannot provide components on a timely basis, at the same price or at all, our ability to manufacture our products will be constrained and our business will suffer. For example, due to the COVID-19 global pandemic, we could see additional disruptions in our supply chain beyond the longer lead-times for the purchase of wafers and assembly services that we are currently experiencing. Most significantly, we obtain wafers for our Very Fast SRAM and APU products from a single foundry, TSMC, and most of them are packaged at ASE.  If we are unable to obtain an adequate supply of wafers from TSMC or find alternative sources in a timely manner, we will be unable to fulfill our customer orders and our operating results will be harmed. We do not have supply agreements with TSMC, ASE or any of our other independent assembly and test suppliers, and instead obtain manufacturing services and products from these suppliers on a purchase-order basis. Our suppliers, including TSMC, have no obligation to supply products or services to us for any specific product, in any specific quantity, at any specific price or for any specific time period. As a result, the loss or failure to perform by any of these suppliers could adversely affect our business and operating results.

​

Should any of our single source suppliers experience manufacturing failures or yield shortfalls, be disrupted by the COVID-19 global pandemic, natural disaster or political instability, choose to prioritize capacity or inventory for other uses or reduce or eliminate deliveries to us for any other reason, we likely will not be able to enforce fulfillment of any delivery commitments and we would have to identify and qualify acceptable replacements from alternative sources of supply. In particular, if TSMC is unable to supply us with sufficient quantities of wafers to meet all of our requirements, we would have to allocate our products among our customers, which would constrain our growth and might cause some of them to seek alternative sources of supply. Since the manufacturing of wafers and other components is extremely complex, the process of qualifying new foundries and suppliers is a lengthy process and there is no assurance that we would be able to find and qualify another supplier without materially adversely affecting our business, financial condition and results of operations.

If we do not successfully develop new products to respond to rapid market changes due to changing technology and evolving industry standards, particularly in the networking and telecommunications markets, our business will be harmed.

If we fail to offer technologically advanced products and respond to technological advances and emerging standards, we may not generate sufficient revenues to offset our development costs and other expenses, which will hurt our business. The development of new or enhanced products is a complex and uncertain process that requires the accurate anticipation of technological and market trends. In particular, the networking and telecommunications markets are rapidly evolving and new standards are emerging. We are vulnerable to advances in technology by competitors, including new SRAM architectures, new forms of DRAM and the emergence of new memory technologies that could enable the development of products that feature higher performance or lower cost. In addition, the trend toward incorporating SRAM into other chips in the networking and telecommunications markets has the potential to reduce future demand for Very Fast SRAM products. We may experience development, marketing and other technological difficulties that may delay or limit our ability to respond to technological changes, evolving industry standards, competitive developments or end-user requirements. For example, because we have limited experience developing integrated circuits, or IC, products other than Very Fast SRAMs, our efforts to introduce new products may not be successful and our business may suffer. Other challenges that we face include:

18

Table of Contents

If we are unable to offset increased wafer fabrication and assembly costs by increasing the average selling prices of our products, our gross margins will suffer.

If there is a significant upturn in the demand for the manufacturing and assembly of semiconductor products as has incurred in recent months as a result of the COVID-19 global pandemic, the available supply of wafers and packaging services may be limited. As a result, we could be required to obtain additional manufacturing and assembly capacity in order to meet increased demand. Securing additional manufacturing and assembly capacity may cause our wafer fabrication and assembly costs to increase. If we are unable to offset these increased costs by increasing the average selling prices of our products, our gross margins will decline.

We are subject to the highly cyclical nature of the networking and telecommunications markets.

Our Very Fast SRAM products are incorporated into routers, switches, wireless local area network infrastructure equipment, wireless base stations and network access equipment used in the highly cyclical networking and telecommunications markets. We expect that the networking and telecommunications markets will continue to be highly cyclical, characterized by periods of rapid growth and contraction. Our business and our operating results are likely to fluctuate, perhaps quite severely, as a result of this cyclicality.

The market for Very Fast SRAMs is highly competitive.

The market for Very Fast SRAMs, which are used primarily in networking and telecommunications equipment, is characterized by price erosion, rapid technological change, cyclical market patterns and intense foreign and domestic competition. Several of our competitors offer a broad array of memory products and have greater financial, technical, marketing, distribution and other resources than we have. Some of our competitors maintain their own semiconductor fabrication facilities, which may provide them with capacity, cost and technical advantages over us. We cannot assure you that we will be able to compete successfully against any of these competitors. Our ability to compete successfully in this market depends on factors both within and outside of our control, including:

There can be no assurance that we will be able to compete successfully in the future. Our failure to compete successfully in these or other areas could harm our business.

19

Table of Contents

We rely heavily on distributors and our success depends on our ability to develop and manage our indirect distribution channels.

A significant percentage of our sales are made to distributors and to contract manufacturers who incorporate our products into end products for OEMs. For example, in fiscal 2021, 2020 and 2019, our largest distributor Avnet Logistics accounted for 29.8%, 34.3% and 31.3%, respectively, of our net revenues. Avnet Logistics and our other existing distributors may choose to devote greater resources to marketing and supporting the products of other companies. Since we sell through multiple channels and distribution networks, we may have to resolve potential conflicts between these channels. For example, these conflicts may result from the different discount levels offered by multiple channel distributors to their customers or, potentially, from our direct sales force targeting the same equipment manufacturer accounts as our indirect channel distributors. These conflicts may harm our business or reputation.

The average selling prices of our products are expected to decline, and if we are unable to offset these declines, our operating results will suffer.

Historically, the average unit selling prices of our products have declined substantially over the lives of the products, and we expect this trend to continue. A reduction in overall average selling prices of our products could result in reduced revenues and lower gross margins. Our ability to increase our net revenues and maintain our gross margins despite a decline in the average selling prices of our products will depend on a variety of factors, including our ability to introduce lower cost versions of our existing products, increase unit sales volumes of these products, and introduce new products with higher prices and greater margins. If we fail to accomplish any of these objectives, our business will suffer. To reduce our costs, we may be required to implement design changes that lower our manufacturing costs, negotiate reduced purchase prices from our independent foundries and our independent assembly and test vendors, and successfully manage our manufacturing and subcontractor relationships. Because we do not operate our own wafer foundry or assembly facilities, we may not be able to reduce our costs as rapidly as companies that operate their own foundries or facilities.

We are substantially dependent on the continued services and performance of our senior management and other key personnel.

Our future success is substantially dependent on the continued services and continuing contributions of our senior management who must work together effectively in order to design our products, expand our business, increase our revenues and improve our operating results. Members of our senior management team have long-standing and important relationships with our key customers and suppliers. The loss of services, whether as a result of illness, retirement or death, of Lee-Lean Shu, our President and Chief Executive Officer, Robert Yau, our Vice President of Engineering, Dr. Avidan Akerib, our Vice President of Associative Computing, any other executive officer or other key employee could significantly delay or prevent the achievement of our development and strategic objectives. We do not have employment contracts with, nor maintain key person insurance on, any of our executive officers or other key employees.

System security risks, data protection, cyber-attacks and systems integration issues could disrupt our internal operations or the operations of our business partners, and any such disruption could harm our reputation or cause a reduction in our expected revenue, increase our expenses, negatively impact our results of operation or otherwise adversely affect our stock price.

Security breaches, computer malware and cyber-attacks have become more prevalent and sophisticated in recent years and may increase in the future due to a large number of our employees working from home during the COVID-19 global pandemic. Experienced computer programmers and hackers may be able to penetrate our network security or the network security of our business partners, and misappropriate or compromise our confidential and proprietary information, create system disruptions or cause shutdowns. The costs to us to eliminate or alleviate cyber or other security problems, bugs, viruses, worms, malicious software programs and security vulnerabilities could be significant, and our efforts to address these problems may not be successful and could result in interruptions and delays that may impede our sales, manufacturing, distribution or other critical functions.

20

Table of Contents

We manage and store various proprietary information and sensitive or confidential data relating to our business on the cloud. Breaches of our security measures or the accidental loss, inadvertent disclosure or unapproved dissemination of proprietary information or confidential data about us, including the potential loss or disclosure of such information or data as a result of fraud, trickery or other forms of deception, could expose us to a risk of loss or misuse of this information, result in litigation and potential liability for us, damage our reputation or otherwise harm our business. In addition, the cost and operational consequences of implementing further data protection measures could be significant.

Portions of our IT infrastructure also may experience interruptions, delays or cessations of service or produce errors in connection with systems integration or migration work that takes place from time to time. We may not be successful in implementing new systems and transitioning data, which could cause business disruptions and be more expensive, time consuming, disruptive and resource-intensive than originally anticipated. Such disruptions could adversely impact our ability to fulfill orders and interrupt other processes and could adversely affect our financial results, stock price and reputation.

We may be unable to accurately predict future sales through our distributors, which could harm our ability to efficiently manage our resources to match market demand.

Our financial results, quarterly product sales, trends and comparisons are affected by fluctuations in the buying patterns of the OEMs that purchase our products from our distributors. While we attempt to assist our distributors in maintaining targeted stocking levels of our products, we may not consistently be accurate or successful. This process involves the exercise of judgment and use of assumptions as to future uncertainties, including end user demand. Inventory levels of our products held by our distributors may exceed or fall below the levels we consider desirable on a going-forward basis. This could result in distributors returning unsold inventory to us, or in us not having sufficient inventory to meet the demand for our products. If we are not able to accurately predict sales through our distributors or effectively manage our relationships with our distributors, our business and financial results will suffer.

A small number of customers generally account for a significant portion of our accounts receivable in any period, and if any one of them fails to pay us, our financial position and operating results will suffer.

At March 31, 2021, four customers accounted for 36%, 28%, 15% and 12% of our accounts receivable, respectively. If any of these customers do not pay us, our financial position and operating results will be harmed. Generally, we do not require collateral from our customers.

Demand for our products may decrease if our OEM customers experience difficulty manufacturing, marketing or selling their products.

Our products are used as components in our OEM customers’ products, including routers, switches and other networking and telecommunications products. Accordingly, demand for our products is subject to factors affecting the ability of our OEM customers to successfully introduce and market their products, including:

As a result, if OEM customers reduce their purchases of our products, our business will suffer.

21

Table of Contents

Our products have lengthy sales cycles that make it difficult to plan our expenses and forecast results.

Our products are generally incorporated in our OEM customers’ products at the design stage. However, their decisions to use our products often require significant expenditures by us without any assurance of success, and often precede volume sales, if any, by a year or more. If an OEM customer decides at the design stage not to incorporate our products into their products, we will not have another opportunity for a design win with respect to that customer’s product for many months or years, if at all. Our sales cycle can take up to 24 months to complete, and because of this lengthy sales cycle, we may experience a delay between increasing expenses for research and development and our sales and marketing efforts and the generation of volume production revenues, if any, from these expenditures. Moreover, the value of any design win will largely depend on the commercial success of our OEM customers’ products. There can be no assurance that we will continue to achieve design wins or that any design win will result in future revenues.

Claims that we infringe third party intellectual property rights could seriously harm our business and require us to incur significant costs.

In recent years, there has been significant litigation in the semiconductor industry involving patents and other intellectual property rights. We have been involved in protracted patent infringement litigation, and we could become subject to additional claims or litigation in the future as a result of allegations that we infringe others’ intellectual property rights or that our use of intellectual property otherwise violates the law. Claims that our products infringe the proprietary rights of others would force us to defend ourselves and possibly our customers, distributors or manufacturers against the alleged infringement. Any such litigation regarding intellectual property could result in substantial costs and diversion of resources and could have a material adverse effect on our business, financial condition and results of operations. Similarly, changing our products or processes to avoid infringing the rights of others may be costly or impractical. If any claims received in the future were to be upheld, the consequences to us could require us to:

Although patent disputes in the semiconductor industry have often been settled through cross-licensing arrangements, we may not be able in any or every instance to settle an alleged patent infringement claim through a cross-licensing arrangement in part because we have a more limited patent portfolio than many of our competitors. If a successful claim is made against us or any of our customers and a license is not made available to us on commercially reasonable terms or we are required to pay substantial damages or awards, our business, financial condition and results of operations would be materially adversely affected.

Our acquisition of companies or technologies could prove difficult to integrate, disrupt our business, dilute stockholder value and adversely affect our operating results.

In November 2015, we acquired all of the outstanding capital stock of privately held MikaMonu Group Ltd., a development-stage, Israel-based company that specializes in in-place associative computing for markets including big data, computer vision and cyber security. We also acquired substantially all of the assets related to the SRAM memory device product line of Sony Corporation in 2009. We intend to supplement our internal development activities by seeking opportunities to make additional acquisitions or investments in companies, assets or technologies that we believe are complementary or strategic. Other than the MikaMonu and Sony acquisitions, we have not made any such acquisitions or investments, and therefore our experience as an organization in making such acquisitions and investments is limited. In connection with the MikaMonu acquisition, we are subject to risks related to potential problems, delays or unanticipated costs that may be encountered in the development of products based on the MikaMonu technology and the establishment of new markets and customer relationships for the potential new

22

Table of Contents

products. In addition, in connection with any future acquisitions or investments we may make, we face numerous other risks, including:

If we proceed with additional acquisitions or investments, we may be required to use a considerable amount of our cash, or to finance the transaction through debt or equity securities offerings, which may decrease our financial liquidity or dilute our stockholders and affect the market price of our stock. As a result, if we fail to properly evaluate and execute acquisitions or investments, our business and prospects may be harmed.

If we are unable to recruit or retain qualified personnel, our business and product development efforts could be harmed.

We must continue to identify, recruit, hire, train, retain and motivate highly skilled technical, managerial, sales and marketing and administrative personnel. Competition for these individuals is intense, and we may not be able to successfully recruit, assimilate or retain sufficiently qualified personnel. We may encounter difficulties in recruiting and retaining a sufficient number of qualified engineers, which could harm our ability to develop new products and adversely impact our relationships with existing and future end-users at a critical stage of development. The failure to recruit and retain necessary technical, managerial, sales, marketing and administrative personnel could harm our business and our ability to obtain new OEM customers and develop new products.

Our business will suffer if we are unable to protect our intellectual property.

Our success and ability to compete depends in large part upon protecting our proprietary technology. We rely on a combination of patent, trade secret, copyright and trademark laws and non-disclosure and other contractual agreements to protect our proprietary rights. These agreements and measures may not be sufficient to protect our technology from third-party infringement. Monitoring unauthorized use of our intellectual property is difficult and we cannot be certain that the steps we have taken will prevent unauthorized use of our technology, particularly in foreign countries where the laws may not protect our proprietary rights as fully as in the United States. Our attempts to enforce our intellectual property rights could be time consuming and costly. In the past, we have been involved in litigation to enforce our intellectual property rights and to protect our trade secrets. Additional litigation of this type may be necessary in the future. Any such litigation could result in substantial costs and diversion of resources. If competitors are able to use our technology without our approval or compensation, our ability to compete effectively could be harmed.

Current unfavorable economic and market conditions, domestically and internationally, may adversely affect our business, financial condition, results of operations and cash flows.

We have significant customer sales both in the United States and internationally. We also rely heavily on our suppliers in Asia. We are therefore susceptible to adverse U.S. and international economic and market conditions,

23

Table of Contents

including the economic difficulties resulting from the COVID-19 global pandemic that currently exist in the United States and worldwide. If any of our manufacturing partners, customers, distributors or suppliers experience serious financial difficulties or ceases operations, our business could be adversely affected.

Any significant order cancellations or order deferrals could adversely affect our operating results.

We typically sell products pursuant to purchase orders that customers can generally cancel or defer on short notice without incurring a significant penalty. Any significant cancellations or deferrals in the future could materially and adversely affect our business, financial condition and results of operations. Cancellations or deferrals could cause us to hold excess inventory, which could reduce our profit margins, increase product obsolescence and restrict our ability to fund our operations. We generally recognize revenue upon shipment of products to a customer. If a customer refuses to accept shipped products or does not pay for these products, we could miss future revenue projections or incur significant charges against our income, which could materially and adversely affect our operating results.

If our business grows, such growth may place a significant strain on our management and operations and, as a result, our business may suffer.

​

We are endeavoring to expand our business, and any growth that we are successful in achieving could place a significant strain on our management systems, infrastructure and other resources. To manage the potential growth of our operations and resulting increases in the number of our personnel, we will need to invest the necessary capital to continue to improve our operational, financial and management controls and our reporting systems and procedures. Our controls, systems and procedures may prove to be inadequate should we experience significant growth. In addition, we may not have sufficient administrative staff to support our operations. For example, we currently have only five employees in our finance department in the United States, including our Chief Financial Officer. Furthermore, our officers have limited experience in managing large or rapidly growing businesses. If our management fails to respond effectively to changes in our business, our business may suffer.

​

Our operations involve the use of hazardous and toxic materials, and we must comply with environmental laws and regulations, which can be expensive, and may affect our business and operating results.

We are subject to federal, state and local regulations relating to the use, handling, storage, disposal and human exposure to hazardous and toxic materials. If we were to violate or become liable under environmental laws in the future as a result of our inability to obtain permits, human error, accident, equipment failure or other causes, we could be subject to fines, costs, or civil or criminal sanctions, face property damage or personal injury claims or be required to incur substantial investigation or remediation costs, which could be material, or experience disruptions in our operations, any of which could have a material adverse effect on our business. In addition, environmental laws could become more stringent over time imposing greater compliance costs and increasing risks and penalties associated with violations, which could harm our business.

We face increasing complexity in our product design as we adjust to new and future requirements relating to the material composition of our products, including the restrictions on lead and other hazardous substances that apply to specified electronic products put on the market in the European Union, China and California. Other countries, including at the federal and state levels in the United States, are also considering similar laws and regulations. Certain electronic products that we maintain in inventory may be rendered obsolete if they are not in compliance with such laws and regulations, which could negatively impact our ability to generate revenue from those products. Although we cannot predict the ultimate impact of any such new laws and regulations, they will likely result in additional costs, or in the worst case decreased revenue, and could even require that we redesign or change how we manufacture our products. Such redesigns result in additional costs and possible delayed or lost revenue.

24

Table of Contents

Risks Related to Manufacturing and Product Development

We may experience difficulties in transitioning to smaller geometry process technologies and other more advanced manufacturing process technologies, which may result in reduced manufacturing yields, delays in product deliveries and increased expenses.

In order to remain competitive, we expect to continue to transition the manufacture of our products to smaller geometry process technologies. This transition will require us to migrate to new manufacturing processes for our products and redesign certain products. The manufacture and design of our products is complex, and we may experience difficulty in transitioning to smaller geometry process technologies or new manufacturing processes. These difficulties could result in reduced manufacturing yields, delays in product deliveries and increased expenses. We are dependent on our relationships with TSMC to transition successfully to smaller geometry process technologies and to more advanced manufacturing processes. If we or TSMC experience significant delays in this transition or fail to implement these transitions, our business, financial condition and results of operations could be materially and adversely affected.

Manufacturing process technologies are subject to rapid change and require significant expenditures for research and development.

We continuously evaluate the benefits of migrating to smaller geometry process technologies in order to improve performance and reduce costs. Historically, these migrations to new manufacturing processes have resulted in significant initial design and development costs associated with pre-production mask sets for the manufacture of new products with smaller geometry process technologies. For example, in the second quarter of fiscal 2019, we incurred approximately $1.0 million in research and development expense associated with a pre-production mask set that will not be used in production as part of the transition to our new 28 nanometer SRAM process technology for our APU product. We will incur similar expenses in the future as we continue to transition our products to smaller geometry processes. The costs inherent in the transition to new manufacturing process technologies will adversely affect our operating results and our gross margin.

Our products are complex to design and manufacture and could contain defects, which could reduce revenues or result in claims against us.

We develop complex products. Despite testing by us and our OEM customers, design or manufacturing errors may be found in existing or new products. These defects could result in a delay in recognition or loss of revenues, loss of market share or failure to achieve market acceptance. These defects may also cause us to incur significant warranty, support and repair costs, divert the attention of our engineering personnel from our product development efforts, result in a loss of market acceptance of our products and harm our relationships with our OEM customers. Our OEM customers could also seek and obtain damages from us for their losses. A product liability claim brought against us, even if unsuccessful, would likely be time consuming and costly to defend. Defects in wafers and other components used in our products and arising from the manufacturing of these products may not be fully recoverable from TSMC or our other suppliers.

25

Table of Contents

Risks Related to Our International Business and Operations

Changes in Taiwan’s political, social and economic environment may affect our business performance.

Because much of the manufacturing and testing of our products is conducted in Taiwan, our business performance may be affected by changes in Taiwan’s political, social and economic environment. For example, any political instability resulting from the relationship among the United States, Taiwan and the People’s Republic of China could damage our business. Moreover, the role of the Taiwanese government in the Taiwanese economy is significant. Taiwanese policies toward economic liberalization, and laws and policies affecting technology companies, foreign investment, currency exchange rates, taxes and other matters could change, resulting in greater restrictions on our ability and our suppliers’ ability to do business and operate facilities in Taiwan. If any of these changes were to occur, our business could be harmed and our stock price could decline.

Our international business exposes us to additional risks.

Products shipped to destinations outside of the United States accounted for 55.4%, 59.6% and 62.5% of our net revenues in fiscal 2021, 2020 and 2019, respectively. Moreover, a substantial portion of our products is manufactured and tested in Taiwan, and the software development for our associative computing products occurs in Israel. We intend to continue expanding our international business in the future. Conducting business outside of the United States subjects us to additional risks and challenges, including:

Moreover, our reporting currency is the U.S. dollar. However, a portion of our cost of revenues and our operating expenses is denominated in currencies other than the U.S. dollar, primarily the New Taiwanese dollar. As a result, appreciation or depreciation of other currencies in relation to the U.S. dollar could result in transaction gains or losses that could impact our operating results. We do not currently engage in currency hedging activities to reduce the risk of financial exposure from fluctuations in foreign exchange rates.

26

Table of Contents

TSMC, as well as our other independent suppliers and many of our OEM customers, have operations in the Pacific Rim, an area subject to significant risk of earthquakes, typhoons and other natural disasters and adverse consequences related to the outbreak of contagious diseases such as COVID-19.

The foundry that manufactures our Fast SRAM, TSMC, and all of the principal independent suppliers that assemble and test our products are located in Taiwan. Many of our customers are also located in the Pacific Rim. The risk of an earthquake in these Pacific Rim locations is significant. The occurrence of an earthquake, typhoon or other natural disaster near the fabrication facilities of TSMC or our other independent suppliers could result in damage, power outages and other disruptions that impair their production and assembly capacity. Any disruption resulting from such events could cause significant delays in the production or shipment of our products until we are able to shift our manufacturing, assembling, packaging or production testing from the affected contractor to another third-party vendor. In such an event, we may not be able to obtain alternate foundry capacity on favorable terms, or at all.

The COVID-19 global pandemic, along with the previous outbreaks of SARS, H1N1 and the Avian Flu, has curtailed travel between and within countries, including in the Asia-Pacific region. Outbreaks of new contagious diseases or the resurgence of existing diseases that significantly affect the Asia-Pacific region could disrupt the operations of our key suppliers and manufacturing partners. In addition, our business could be harmed if such an outbreak resulted in travel being restricted, the implementation of stay-at-home or shelter-in-place orders or if it adversely affected the operations of our OEM customers or the demand for our products or our OEM customers’ products.

The United States could materially modify certain international trade agreements, or change tax provisions related to the global manufacturing and sales of our products.

A portion of our business activities are conducted in foreign countries, including Taiwan and Israel. Our business benefits from free trade agreements, and we also rely on various U.S. corporate tax provisions related to international commerce as we develop, manufacture, market and sell our products globally. Any action to materially modify international trade agreements, change corporate tax policy related to international commerce or mandate domestic production of goods, could adversely affect our business, financial condition and results of operations.

Some of our products are incorporated into advanced military electronics, and changes in international geopolitical circumstances and domestic budget considerations may hurt our business.

Some of our products are incorporated into advanced military electronics such as radar and guidance systems. Military expenditures and appropriations for such purchases rose significantly in recent years. However, if current U.S. military operations around the world are scaled back, demand for our products for use in military applications may decrease, and our operating results could suffer. Domestic budget considerations may also adversely affect our operating results. For example, if governmental appropriations for military purchases of electronic devices that include our products are reduced, our revenues will likely decline.

Risks Relating to Our Common Stock and the Securities Market

The trading price of our common stock is subject to fluctuation and is likely to be volatile.

The trading price of our common stock may fluctuate significantly in response to a number of factors, some of which are beyond our control, including:

27

Table of Contents

In recent years the stock market in general, and the market for technology stocks in particular, have experienced extreme price fluctuations, which have often been unrelated to the operating performance of affected companies. The market price of our common stock might experience significant fluctuations in the future, including fluctuations unrelated to our performance. These fluctuations could materially adversely affect our business relationships, our ability to obtain future financing on favorable terms or otherwise harm our business. In addition, in the past, securities class action litigation has often been brought against a company following periods of volatility in the market price of its securities. This risk is especially acute for us because the extreme volatility of market prices of technology companies has resulted in a larger number of securities class action claims against them. Due to the potential volatility of our stock price, we may in the future be the target of similar litigation. Securities litigation could result in substantial costs and divert management’s attention and resources. This could harm our business and cause the value of our stock to decline.

We may need to raise additional capital in the future, which may not be available on favorable terms or at all, and which may cause dilution to existing stockholders.

We may need to seek additional funding in the future. We do not know if we will be able to obtain additional financing on favorable terms, if at all. If we cannot raise funds on acceptable terms, if and when needed, we may not be able to develop or enhance our products, take advantage of future opportunities or respond to competitive pressures or unanticipated requirements, and we may be required to reduce operating costs, which could seriously harm our business. In addition, if we issue equity securities, our stockholders may experience dilution or the new equity securities may have rights, preferences or privileges senior to those of our common stock.

Use of a portion of our cash reserves to repurchase shares of our common stock presents potential risks and disadvantages to us and our continuing stockholders.  

From November 2008 through March 2021 we repurchased and retired an aggregate of 12,004,779 shares of our common stock at a total cost of $60.7 million, including 3,846,153 shares repurchased at a total cost of $25 million pursuant to a modified “Dutch auction” self-tender offer that we completed in August 2014 and additional shares repurchased in the open market pursuant to our stock repurchase program. At March 31, 2021, we had outstanding authorization from our Board of Directors to purchase up to an additional $4.3 million of our common stock from time to time under our repurchase program. Although our Board has determined that these repurchases are in the best interests of our stockholders, they expose us to certain risks including:

28

Table of Contents

Our executive officers, directors and entities affiliated with them hold a substantial percentage of our common stock.

​

As of May 31, 2021, our executive officers, directors and entities affiliated with them beneficially owned approximately 35% of our outstanding common stock. As a result, these stockholders will be able to exercise substantial influence over, and may be able to effectively control, matters requiring stockholder approval, including the election of directors and approval of significant corporate transactions, which could have the effect of delaying or preventing a third party from acquiring control over or merging with us.

​

The provisions of our charter documents might inhibit potential acquisition bids that a stockholder might believe are desirable, and the market price of our common stock could be lower as a result.

​

Our Board of Directors has the authority to issue up to 5,000,000 shares of preferred stock. Our Board of Directors can fix the price, rights, preferences, privileges and restrictions of the preferred stock without any further vote or action by our stockholders. The issuance of shares of preferred stock might delay or prevent a change in control transaction. As a result, the market price of our common stock and the voting and other rights of our stockholders might be adversely affected. The issuance of preferred stock might result in the loss of voting control to other stockholders. We have no current plans to issue any shares of preferred stock. Our charter documents also contain other provisions, which might discourage, delay or prevent a merger or acquisition, including:

​

​

​

​

​

These provisions could also have the effect of discouraging others from making tender offers for our common stock. As a result, these provisions might prevent the market price of our common stock from increasing substantially in response to actual or rumored takeover attempts. These provisions might also prevent changes in our management.

​

Item 1B.    Unresolved Staff Comments

None.

Item 2.    Properties

Our executive offices, our principal administration, marketing and sales operations and a portion of our research and development operations are located in a 44,277 square foot facility in Sunnyvale, California, which we purchased in fiscal 2010. In addition, we occupy approximately 25,250 square feet in a facility located in Hsin Chu, Taiwan under a lease expiring in August 2023. This facility supports our manufacturing activities. We believe that both our Sunnyvale and Taiwan facilities are adequate for our needs for the foreseeable future. We also lease space in the United States in the states of Georgia and Texas and in Israel. The aggregate annual gross rent for our leased facilities was approximately $767,000 in fiscal 2021.

Item 3.    Legal Proceedings

None.

Item 4.    Mine Safety Disclosures

Not applicable.

29

Table of Contents

PART II

​

Item 5.    Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information, Holders of Common Stock and Dividends

Our common stock is traded on the Nasdaq Global Market under the symbol “GSIT”.

On May 31, 2021, there were approximately 20 holders of record of our common stock. Because many of such shares are held by brokers and other institutions on behalf of stockholders, we are unable to estimate the total number of beneficial holders of our common stock represented by these record holders.

We have never declared or paid cash dividends on our common stock, and we do not anticipate declaring or paying any cash dividends in the foreseeable future.

Issuer Purchases of Equity Securities

Our Board of Directors has authorized us to repurchase, at management’s discretion, shares of our common stock. Under the repurchase program, we may repurchase shares from time to time on the open market or in private transactions. The specific timing and amount of the repurchases will be dependent on market conditions, securities law limitations and other factors. The repurchase program may be suspended or terminated at any time without prior notice. During the quarter ended March 31, 2021, we did not repurchase any of our shares under the repurchase program.

​

30

Table of Contents

​

Item 6.    Selected Financial Data

​

You should read the following selected consolidated financial data in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and the related notes included elsewhere in this report. The selected consolidated statements of operations data set forth below for the fiscal years ended March 31, 2021, 2020 and 2019 and the selected consolidated balance sheet data as of March 31, 2021 and 2020 are derived from, and are qualified by reference to, our audited consolidated financial statements included elsewhere in this report. The selected consolidated statements of operations data set forth below for the fiscal years ended March 31, 2018 and 2017 and the selected consolidated balance sheet data as of March 31, 2019, 2018 and 2017 are derived from audited consolidated financial statements not included in this report.

​

​

​

31

Table of Contents

Item 7.    Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion contains forward-looking statements that involve risks and uncertainties. Our actual results could differ substantially from those anticipated in these forward-looking statements as a result of many factors, including those set forth under “Risk Factors” and elsewhere in this report. The following discussion should be read together with our consolidated financial statements and the related notes included elsewhere in this report.

Overview

We are a fabless semiconductor company that designs, develops and markets static random access memories, or SRAMs, that operate at speeds of less than 10 nanoseconds, which we refer to as Very Fast SRAMs, primarily for the networking and telecommunications markets. We are subject to the highly cyclical nature of the semiconductor industry, which has experienced significant fluctuations, often in connection with fluctuations in demand for the products in which semiconductor devices are used. Our revenues have been substantially impacted by significant fluctuations in sales to our largest customer, Nokia. We expect that future direct and indirect sales to Nokia will continue to fluctuate significantly on a quarterly basis. The networking and telecommunications market has accounted for a significant portion of our net revenues in the past and has declined during the past several years and is expected to continue to decline. In recent years we have devoted significant resources to the development of our new APU product. However, with no debt and substantial liquidity, we believe we are in a better financial position than many other companies of our size.

The COVID-19 pandemic has affected many of the countries in which we, our customers, our suppliers and our other business partners conduct business. Governments in affected regions have implemented, and may continue to implement, safety precautions which include quarantines, travel restrictions, business closures, cancellations of public gatherings and other measures as they deem necessary. Many organizations and individuals, including the Company and our employees, are taking additional steps to avoid or reduce infection, including limiting travel and working from home. These measures are disrupting normal business operations both in and outside of affected areas and have had significant negative impacts on businesses and financial markets worldwide. While expected to be temporary, these disruptions negatively impacted our revenue, results of operations, financial condition, and liquidity in fiscal year 2021, and are expected to continue to negatively impact us in fiscal 2022.

We continue to monitor our operations and government recommendations and have made modifications to our normal operations because of the COVID-19 global pandemic. We have instituted many preventative measures and are regularly evaluating those measures and others as we continue to better understand our current and future operating environment. Since March 2020, except for our employees located in Taiwan, the majority of our employees have worked from home around the world. In May 2021, with the surge in COVID-19 infections in Taiwan, our employees in Taiwan have begun working from home under alternating schedules. We have maintained a substantial portion of our manufacturing operational capacity at our primary manufacturing support facility located in Hsin Chu, Taiwan where our suppliers are located and all of our products are manufactured. Since the outbreak of COVID-19, aside from the lengthening of lead times for wafers and assembly services, we have experienced minimal impact, and continue to experience minimal impact, on our manufacturing operations in Taiwan. Final testing of our product is conducted in house. Shipping and receiving operations at our United States headquarters are being maintained by a skeleton crew with minimal impact. Our revenues have been and are expected to continue to be impacted by changes in customer buying patterns and communication limitations related to COVID-19 restrictions that require a significant number of our customer contacts to work from home. Our results for the fiscal year ended March 31, 2021 demonstrate the challenges that we are facing during the COVID-19 global pandemic, which has restricted the activities of our sales force and distributors, reduced customer demand and caused the postponement of investment in certain customer sectors. These challenges are also impacting us as we enter new

32

Table of Contents

markets and engage with target customers to sell our new APU product. Industry conferences and on-site training workshops, which are typically used for building a sales pipeline, are unavailable due to COVID-19 related restrictions. We have adapted our sales strategies for the COVID-19 environment, where we cannot do face-to-face meetings and conduct secure meetings with government and defense customers, but we are still not operating at an optimal level.

The disruption to the marketplace resulting from the COVID-19 global pandemic that we are currently experiencing is unlike anything we have ever had to deal with. While we continue to monitor the business metrics that we have historically used to predict our financial performance, we are uncertain as to whether these metrics will operate consistently with our historical experience.

As of March 31, 2021, we had cash, cash equivalents, and short-term and long-term investments of $59.7 million, with no debt. We have a team in-place with tremendous depth and breadth of experience and knowledge, with a legacy business that is providing an ongoing source of funding for the development of new product lines. We have a strong balance sheet and liquidity position that we anticipate will provide financial flexibility and security in the current environment of economic uncertainty with no current expectations of additional cash infusions required. Generally, our primary source of liquidity is cash equivalents and short-term investments. Our level of cash equivalents and short-term investments has historically been sufficient to meet our operating and capital needs. We believe that during the next 12 months the COVID-19 global pandemic could continue to impact general economic activity and demand in our end markets. Although it is difficult to estimate the length or gravity of the impact of the COVID-19 outbreak, if the pandemic continues, it may have an adverse effect on our results of operations, financial position, including potential impairments, and liquidity in fiscal year 2022.

On March 27, 2020, the Coronavirus Aid, Relief, and Economic Security Act (“CARES Act”) was enacted to provide emergency economic stimulus in response to the COVID-19 global pandemic. The CARES Act includes aid to small businesses in the form of loans and grants, and other efforts to stabilize the U.S. economy. The Consolidated Appropriations Act (“CAA”) which was signed into law in 2020 extended some of the CARES Act programs along with adding new stimulus provisions. In March 2021, the American Rescue Plan Act of 2021 (“ARPA”) was also passed which further extended several CARES Act relief programs and other assistance. We have not filed, and do not intend to file, for funding related to the CARES Act, CAA or ARPA due to our strong balance sheet and liquidity position with $59.7 million in cash and cash equivalents, short-term investments and long-term investments and no debt outstanding. We currently have no plans to defer payroll taxes, to layoff or furlough employees or to modify leases and stock compensation plans. Also included in the CARES Act are numerous income tax provisions including changes to the net operating loss. During fiscal year 2021, we recorded a $378,000 tax benefit resulting from the carryback of our fiscal year 2020 federal net operating loss to fiscal year 2018 due to the five-year net operating loss carryback provision from the March 2020 CARES Act. We believe that the CAA and ARPA will not have a significant impact on us.

Revenues.    Our revenues are derived primarily from sales of our Very Fast SRAM products. Sales to networking and telecommunications OEMs accounted for 50% to 55% of our net revenues during our last three fiscal years. We also sell our products to OEMs that manufacture products for military and aerospace applications such as radar and guidance systems, missiles and satellites, for professional audio applications such as sound mixing systems, for test and measurement applications such as high-speed testers, for automotive applications such as smart cruise control and voice recognition systems, and for medical applications such as ultrasound and CAT scan equipment.

As is typical in the semiconductor industry, the selling prices of our products generally decline over the life of the product. Our ability to increase net revenues, therefore, is dependent upon our ability to increase unit sales volumes of existing products and to introduce and sell new products with higher average selling prices in quantities

33

Table of Contents

sufficient to compensate for the anticipated declines in selling prices of our more mature products. Although we expect the average selling prices of individual products to decline over time, we believe that, over the next several quarters, our overall average selling prices will increase due to a continuing shift in product mix to a higher percentage of higher price, higher density products, and to a lesser extent, recent price increases to our customers due to supply constraints. Our ability to increase unit sales volumes is dependent primarily upon increases in customer demand but, particularly in periods of increasing demand, can also be affected by our ability to increase production through the availability of increased wafer fabrication capacity from TSMC, our wafer supplier, and our ability to increase the number of good integrated circuit die produced from each wafer through die size reductions and yield enhancement activities.

We may experience fluctuations in quarterly net revenues for a number of reasons. Historically, orders on hand at the beginning of each quarter are insufficient to meet our revenue objectives for that quarter and are generally cancelable up to 30 days prior to scheduled delivery. Accordingly, we depend on obtaining and shipping orders in the same quarter to achieve our revenue objectives. In addition, the timing of product releases, purchase orders and product availability could result in significant product shipments at the end of a quarter. Failure to ship these products by the end of the quarter may adversely affect our operating results. Furthermore, our customers may delay scheduled delivery dates and/or cancel orders within specified timeframes without significant penalty.

We sell our products through our direct sales force, international and domestic sales representatives and distributors. Our revenues have been and are expected to continue to be impacted by changes in customer buying patterns and communication limitations related to COVID-19 restrictions that require a significant number of our customer contacts to work from home. The majority of our customer contracts, which may be in the form of purchase orders, contracts or purchase agreements, contain performance obligations for delivery of agreed upon products. Delivery of all performance obligations contained within a contract with a customer typically occurs at the same time (or within the same accounting period). Transfer of control typically occurs at the time of shipment or at the time the product is pulled from consignment as that is the point at which delivery has occurred, title and the risks and rewards of ownership have passed to the customer, and we have a right to payment. Thus, we will generally recognize revenue upon shipment of the product. Sales to consignment warehouses, who purchase products from us for use by contract manufacturers, are recorded upon delivery to the contract manufacturer.

Historically, a small number of OEM customers have accounted for a substantial portion of our net revenues, and we expect that significant customer concentration will continue for the foreseeable future. Many of our OEMs use contract manufacturers to manufacture their equipment. Accordingly, a significant percentage of our net revenues is derived from sales to these contract manufacturers and to consignment warehouses. In addition, a significant portion of our sales are made to foreign and domestic distributors who resell our products to OEMs, as well as their contract manufacturers. Direct sales to contract manufacturers and consignment warehouses accounted for 43.7%, 33.7% and 41.3% of our net revenues for fiscal 2021, 2020 and 2019, respectively. Sales to foreign and domestic distributors accounted for 54.7%, 61.3% and 56.0% of our net revenues for fiscal 2021, 2020 and 2019, respectively. The following direct customers accounted for 10% or more of our net revenues in one or more of the following periods:

34

Table of Contents

Nokia was our largest customer in fiscal 2021, 2020 and 2019. Nokia purchases products directly from us and through contract manufacturers and distributors. Based on information provided to us by its contract manufacturers and our distributors, purchases by Nokia represented approximately 39%, 38% and 45% of our net revenues in fiscal 2021, 2020 and 2019, respectively. Our revenues have been substantially impacted by significant fluctuations in sales to Nokia, and we expect that future direct and indirect sales to Nokia will continue to fluctuate substantially on a quarterly basis and that such fluctuations may significantly affect our operating results in future periods. To our knowledge, none of our other OEM customers accounted for more than 10% of our net revenues in fiscal 2021, 2020 or 2019.

Cost of Revenues.    Our cost of revenues consists primarily of wafer fabrication costs, wafer sort, assembly, test and burn-in expenses, the amortized cost of production mask sets, stock-based compensation and the cost of materials and overhead from operations. All of our wafer manufacturing and assembly operations, and a significant portion of our wafer sort testing operations, are outsourced. Accordingly, most of our cost of revenues consists of payments to TSMC and independent assembly and test houses. Because we do not have long-term, fixed-price supply contracts, our wafer fabrication, assembly and other outsourced manufacturing costs are subject to the cyclical fluctuations in demand for semiconductors. Cost of revenues also includes expenses related to supply chain management, quality assurance, and final product testing and documentation control activities conducted at our headquarters in Sunnyvale, California and our branch operations in Taiwan.

Gross Profit.    Our gross profit margins vary among our products and are generally greater on our higher density products and, within a particular density, greater on our higher speed and industrial temperature products. We expect that our overall gross margins will fluctuate from period to period as a result of shifts in product mix, changes in average selling prices and our ability to control our cost of revenues, including costs associated with outsourced wafer fabrication and product assembly and testing.

Research and Development Expenses.    Research and development expenses consist primarily of salaries and related expenses for design engineers and other technical personnel, the cost of developing prototypes, stock-based compensation and fees paid to consultants. We charge all research and development expenses to operations as incurred. We charge mask costs used in production to cost of revenues over a 12-month period. However, we charge costs related to pre-production mask sets, which are not used in production, to research and development expenses at the time they are incurred. These charges often arise as we transition to new process technologies and, accordingly, can cause research and development expenses to fluctuate on a quarterly basis. We believe that continued investment in research and development is critical to our long-term success, and we expect to continue to devote significant resources to product development activities. In particular, we are devoting substantial resources to the development of a new category of in-place associative computing products. Accordingly, we expect that our research and development expenses will continue to be substantial in future periods and may lead to operating losses in some periods. Such expenses as a percentage of net revenues may fluctuate from period to period.

Selling, General and Administrative Expenses.     Selling, general and administrative expenses consist primarily of commissions paid to independent sales representatives, salaries, stock-based compensation and related expenses for personnel engaged in sales, marketing, administrative, finance and human resources activities, professional fees, costs associated with the promotion of our products and other corporate expenses. We expect that our sales and marketing expenses will increase in absolute dollars in future periods if we are able to grow and expand our sales force but that, to the extent our revenues increase in future periods, these expenses will generally decline as a percentage of net revenues. We also expect that, in support of any future growth that we are able to achieve, general and administrative expenses will generally increase in absolute dollars.

35

Table of Contents

Acquisition

On November 23, 2015, we acquired all of the outstanding capital stock of privately held MikaMonu Group Ltd. (“MikaMonu”), a development-stage, Israel-based company that specialized in in-place associative computing for markets including big data, computer vision and cyber security. MikaMonu, located in Tel Aviv, held 12 United States patents and had a number of pending patent applications.

The acquisition was undertaken in order to gain access to the MikaMonu patents and the potential markets, and new customer base in those markets, that can be served by new products that we are developing using the in-place associative computing technology.

The acquisition has been accounted for as a purchase under authoritative guidance for business combinations.  The purchase price of the acquisition was allocated to the intangible assets acquired, with the excess of the purchase price over the fair value of assets acquired recorded as goodwill. We perform a goodwill impairment test near the end of each fiscal year.

Under the terms of the acquisition agreement, we paid the former MikaMonu shareholders initial cash consideration of approximately $4.9 million. We are also required to pay the former MikaMonu shareholders future contingent consideration consisting of retention payments and “earnout” payments, as described below.

We also made cash retention payments totaling $2.5 million to the three former MikaMonu shareholders, conditioned on the continued employment of Dr. Avidan Akerib, MikaMonu’s co-founder and chief technologist. Retention payments of $743,000, $750,000 and $1.0 million were paid to the former MikaMonu shareholders during the quarters ended December 31, 2017, 2018 and 2019, respectively. We are not required to make any further retention payments.

We will also make “earnout” payments to the former MikaMonu shareholders in cash or shares of our common stock, at our discretion, during a period of up to ten years following the closing if certain product development milestones and revenue targets for products based on the MikaMonu technology are achieved. Earnout amounts of $750,000 were paid in the fiscal year ended March 31, 2019 based on the achievement of certain product development milestones. An earnout amount of $4.0 million will be payable if certain revenue milestones are achieved by January 1, 2022; and additional payments, up to a maximum of $30.0 million, equal to 5% of net revenues from the sale of qualifying products in excess of certain thresholds, will be made quarterly through December 31, 2025.

The portion of the retention payment made to Dr. Akerib (approximately $1.2 million) was recorded as compensation expense over the period that his services were provided to us. The portion of the retention payment made to the other former MikaMonu shareholders (approximately $1.3 million) plus the maximum amount of the potential earnout payments totals approximately $36.0 million at March 31, 2021. We determined that the fair value of this contingent consideration liability was $5.8 million at the acquisition date. The contingent consideration liability is included in contingent consideration, non-current on the Consolidated Balance Sheet at March 31, 2020 and 2021 in the amount of $3.9 million and $4.2 million, respectively.

At each reporting period, the contingent consideration liability will be re-measured at then current fair value with changes recorded in the Consolidated Statements of Operations. Changes in any of the inputs may result in significant adjustments to the recorded fair value. Re-measurement of the contingent consideration liability at March 31, 2021 resulted in an increase of the contingent consideration liability of $229,000.

36

Table of Contents

The allocation of the purchase price to acquired identifiable intangible assets and goodwill was based on their estimated fair values at the date of acquisition. The fair value allocated to patents was $3.5 million and the residual value allocated to goodwill was $8.0 million.

Results of Operations

The following table sets forth statement of operations data as a percentage of net revenues for the periods indicated:

​

Fiscal Year Ended March 31, 2021 Compared to Fiscal Year Ended March 31, 2020

Net Revenues.    Net revenues decreased by 36.0% from $43.3 million in fiscal 2020 to $27.7 million in fiscal 2021. The overall average selling price of all units shipped in fiscal 2021 decreased by 5.5% in fiscal 2021 compared to the prior fiscal year.

Net revenues in fiscal 2021 were impacted by the COVID-19 global pandemic. Our net revenues in fiscal 2021 year demonstrate the challenges that we are facing during the COVID-19 global pandemic, which has restricted the activities of our sales force and distributors, reduced customer demand and caused the postponement of investment in certain customer sectors. These challenges are also impacting us as we enter new markets and engage with target customers. Industry conferences and on-site training workshops, which are typically used for building a sales pipeline, are unavailable due to COVID-19 related restrictions. We have adapted our sales strategies for the COVID-19 environment as there are limitations with both in-person and virtual meetings, particularly, government and defense customers with regards to secure teleconferencing. However, we are still not operating at an optimal level.

Units shipped declined 30.9% in fiscal 2021 compared to fiscal 2020. The networking and telecommunications markets represented 53% and 50% of shipments in fiscal 2021 and in fiscal 2020, respectively. Direct and indirect sales to Nokia, currently our largest customer, decreased by $5.4 million from $16.3 million in fiscal 2020 to $10.9 million fiscal 2021. Shipments of our SigmaQuad product line accounted for 56.7% of total shipments in fiscal 2021 compared to 60.8% of total shipments in fiscal 2020. The decrease in SigmaQuad shipments was primarily due to the decreased sales to Nokia.

We currently expect that net revenues will fluctuate in the future, from period-to-period, based on evolving customer demand for existing products, the pace of adoption of newer products, and macroeconomic conditions. Further, due to heightened volatility and uncertainty in customer demand resulting from the COVID-19 global

37

Table of Contents

pandemic, we may experience decreased sales and revenues. We believe such impact may in particular affect our direct and indirect sales of Very Fast SRAMs to Nokia and our other key OEM customers.

Cost of Revenues.    Cost of revenues decreased by 19.4% from $18.0 million in fiscal 2020 to $14.5 million in fiscal 2021. Cost of revenues included a provision for excess and obsolete inventories of $343,000 in fiscal 2020 compared to $466,000 in fiscal 2021. Cost of revenues included stock-based compensation expense of $346,000 and $257,000, respectively, in fiscal 2021 and fiscal 2020.

Gross Profit.    Gross profit decreased by 47.8% from $25.3 million in fiscal 2020 to $13.2 million in fiscal 2021. Gross margin decreased from 58.5% in fiscal 2020 to 47.7% in fiscal 2021. The change in gross profit is primarily related to the change in net revenues discussed above. The decrease in gross margin was primarily related to changes in the mix of products and customers and changes in the level of charges for inventory reserves booked in each period.

Research and Development Expenses.    Research and development expenses decreased 7.5% from $25.2 million in fiscal 2020 to $23.3 million in fiscal 2021. The decrease in research and development spending was primarily related to a decrease of $2.7 million for purchased intellectual property and a lesser decrease in consulting expenses partially offset by lesser increases in payroll related expenses, patent related legal fees and software maintenance expenses. Research and development expenses included stock-based compensation expense of $1.5 million in fiscal 2021 and fiscal 2020.

Selling, General and Administrative Expenses.    Selling, general and administrative expenses increased 2.0% from $10.9 million in fiscal 2020 to $11.1 million in fiscal 2021. Increases in professional fees, stock-based compensation expense, payroll related expenses and the remeasurement of contingent consideration were partially offset by decreases in independent sales representative commissions and travel expenses. Selling, general and administrative expenses included stock-based compensation expense of $999,000 and $822,000, respectively, in fiscal 2021 and fiscal 2020.

Interest and Other Income (Expense), Net.  Interest and other income (expense), net decreased 86.8% from $712,000 in fiscal 2020 to $94,000 in fiscal 2021. Interest income decreased by $483,000 due to lower interest rates received on cash and short-term and long-term investments. The foreign currency exchange loss increased from ($66,000) in fiscal 2020 to ($201,000) in fiscal 2021. The exchange loss in each period was primarily related to our Taiwan branch operations and operations in Israel.

Provision for Income Taxes.    The provision for income taxes was $247,000 in fiscal 2020 compared to $335,000 in fiscal 2021. The increase in fiscal 2021 compared to fiscal 2020 was primarily due to the settlement of an income tax audit in Israel during the quarter ended June 30, 2020 for fiscal years 2016 through fiscal 2019 which resulted in a discrete tax provision of $479,000, a tax benefit in fiscal 2021 in the amount of $378,000 resulting from the carryback of the Company’s fiscal year 2020 federal net operating loss to fiscal year 2018 due to the five year net operating loss carryback provision from the March 2020 CARES Act, and to a lesser extent due to fluctuations in the relative mix of income among our operating jurisdictions. Because we recorded a cumulative three-year loss on a U.S. tax basis for the year ended March 31, 2021 and the realization of our deferred tax assets is questionable, we recorded a tax provision reflecting a valuation allowance of $13.0 million in net deferred tax assets in fiscal 2021. Reductions in uncertain tax benefits due to lapses in the statute of limitations were not significant in the years ended March 31, 2021 and 2020.

Net Income (Loss).    Net loss was ($10.3) million in fiscal 2020 compared to a net loss of ($21.5) million in fiscal 2021. This increase was primarily due to the changes in net revenues, gross profit and operating expenses discussed above.

38

Table of Contents

Fiscal Year Ended March 31, 2020 Compared to Fiscal Year Ended March 31, 2019

Net Revenues.    Net revenues decreased by 15.8% from $51.5 million in fiscal 2019 to $43.3 million in fiscal 2020. The overall average selling price of all units shipped in fiscal 2020 decreased by 0.8% in fiscal 2020 compared to the prior fiscal year. Units shipped declined 14.7% in fiscal 2020 compared to fiscal 2019. The networking and telecommunications markets represented 50% and 55% of shipments in fiscal 2020 and in fiscal 2019, respectively. Direct and indirect sales to Nokia, currently our largest customer, decreased by $6.8 million from $23.1 million in fiscal 2019 to $16.3 million fiscal 2020. Shipments of our SigmaQuad product line accounted for 60.8% of total shipments in fiscal 2020 compared to 63.6% of total shipments in fiscal 2019. The decrease in SigmaQuad shipments was primarily due to the decreased sales to Nokia.

We currently expect that net revenues will fluctuate in the future, from period-to-period, based on evolving customer demand for existing products, the pace of adoption of newer products, and macroeconomic conditions. Further, due to heightened volatility and uncertainty in customer demand resulting from the COVID-19 global pandemic, we may experience decreased sales and revenues. We believe such impact may in particular affect our direct and indirect sales of Very Fast SRAMs to Nokia and our other key OEM customers.

Cost of Revenues.    Cost of revenues decreased by 9.4% from $19.9 million in fiscal 2019 to $18.0 million in fiscal 2020. Cost of revenues included a provision for excess and obsolete inventories of $1.2 million in fiscal 2019 compared to $343,000 in fiscal 2020. Cost of revenues included stock-based compensation expense of $257,000 and $234,000, respectively, in fiscal 2020 and fiscal 2019.

Gross Profit.    Gross profit decreased by 19.9% from $31.6 million in fiscal 2019 to $25.3 million in fiscal 2020. Gross margin decreased from 61.4% in fiscal 2019 to 58.5% in fiscal 2020. The decrease in gross margin was primarily related to changes in the mix of products and customers and the reduction in the provision for excess and obsolete inventories in fiscal 2020 compared to fiscal 2019 discussed above.

Research and Development Expenses.    Research and development expenses increased 18.1% from $21.4 million in fiscal 2019 to $25.2 million in fiscal 2020. The increase was primarily due to increases of $2.7 million for purchased intellectual property with no alternative future use, $882,000 in consulting and prototype development fees, $712,000 in payroll related expenses and $177,000 in stock-based compensation expense that were primarily offset by a decrease of $986,000 in non-production mask sets, all related to our associative processing development activities. Research and development expenses included stock-based compensation expense of $1.5 million and $1.3 million, respectively, in fiscal 2020 and fiscal 2019.

Selling, General and Administrative Expenses.    Selling, general and administrative expenses increased 4.5% from $10.5 million in fiscal 2019 to $10.9 million in fiscal 2020. This increase was primarily related to an increase in the re-measurement of the contingent consideration liability related to our acquisition of MikaMonu which resulted in an increase of the liability of $193,000 in fiscal 2020 compared to a reduction of $179,000 in fiscal 2019, for a year over year increase in expenses of $372,000. Lesser increases in professional fees and stock-based compensation expenses were offset by a decrease in independent sales representative commissions. Selling, general and administrative expenses included stock-based compensation expense of $822,000 and $722,000, respectively, in fiscal 2020 and fiscal 2019.

Interest and Other Income (Expense), Net.  Interest and other income (expense), net increased 58.2% from $450,000 in fiscal 2019 to $712,000 in fiscal 2020. Interest income increased by $107,000 due to higher interest rates received on cash and short-term and long-term investments. The foreign currency exchange loss decreased from ($221,000) in fiscal 2019 to ($66,000) in fiscal 2020. The exchange loss in each period was primarily related to our Taiwan branch operations and operations in Israel.

39

Table of Contents

Provision for Income Taxes.    The provision for income taxes was $105,000 in fiscal 2019 compared to $247,000 in fiscal 2020. This change was primarily due to fluctuations in the relative mix of income among our operating jurisdictions. Because we recorded a cumulative three-year loss on a U.S. tax basis for the year ended March 31, 2020 and the realization of our deferred tax assets is questionable, we recorded a tax provision reflecting a valuation allowance of $9.4 million in net deferred tax assets in fiscal 2020. Reductions in uncertain tax benefits due to lapses in the statute of limitations were not significant in the years ended March 31, 2020 and 2019.

Net Income (Loss).    Net income was $163,000 in fiscal 2019 compared to a net loss of ($10.3) million in fiscal 2020. This decrease was primarily due to the changes in net revenues, gross profit and operating expenses discussed above.

Liquidity and Capital Resources

As of March 31, 2021, our principal sources of liquidity were cash, cash equivalents and short-term investments of $54.0 million compared to $66.6 million as of March 31, 2020. Cash, cash equivalents and short-term investments totaling $31.1 million were held in foreign locations as of March 31, 2021. Net cash used in operating activities was $15.3 million and $4.7 million for fiscal 2021 and fiscal 2020, respectively, compared to net cash provided by operating activities of $3.0 million for fiscal 2019. The primary use of cash in fiscal 2021 was the net loss of $21.5 million. The primary sources of cash in fiscal 2021 were non-cash items including stock-based compensation of $2.9 million and depreciation and amortization expenses of $1.2 million and a provision for excess and obsolete inventories of $466,000 and a decrease in accounts receivable of $2.6 million. Accounts receivable decreased primarily due to the decreased level of shipments during the fourth quarter of fiscal 2021 compared to the prior year and the timing of shipments during the quarter. The primary use of cash in fiscal 2020 was the net loss of $10.3 million. The primary sources of cash in fiscal 2020 were non-cash items including stock-based compensation of $2.6 million, depreciation and amortization expenses of $1.4 million and a provision for excess and obsolete inventories of $343,000, a decrease in inventories of $1.1 million and a decrease of $1.0 million in accounts receivable. Accounts receivable decreased primarily due to the decreased level of shipments during the fourth quarter of fiscal 2020 compared to the prior year. The primary sources of cash in fiscal 2019 were an increase in accrued expenses and other liabilities of $1.5 million and non-cash items including stock-based compensation of $2.3 million, depreciation and amortization expenses of $1.5 million and a provision for excess and obsolete inventories of $1.2 million. Accrued expenses and other liabilities increased primarily due to increased levels of compensation related accruals in fiscal 2019 compared to the prior year. The primary uses of cash in fiscal 2019 were increases in accounts receivable of $2.1 million and inventory of $1.3 million. Accounts receivable increased primarily due to the timing of payments received from customers and the increased level of shipments during fourth quarter of fiscal 2019 compared to the prior year.

Net cash provided by investing activities was $3.3 million and $10.0 million in fiscal 2021 and 2020, respectively, compared to net cash used in investing activities of $3.5 million in fiscal 2019. Investment activities in fiscal 2021 primarily consisted of the maturity of certificates of deposit, supranational obligations and agency bonds of $21.0 million partially offset by the purchase of certificates of deposit, supranational obligations and agency bonds of $17.5 million. Investment activities in fiscal 2020 primarily consisted of the maturity of supranational obligations, agency bonds and certificates of deposit of $27.4 million and a reduction in the MikaMonu escrow deposits of $1.0 million, partially offset by the purchase of certificates of deposit and agency bonds of $18.1 million. Investment activities in fiscal 2019 primarily consisted of the purchase of agency bonds and certificates of deposit of $20.3 million and the purchase of property and equipment of $2.1 million, partially offset by the maturity of agency bonds and certificates of deposit of $18.2 million and a reduction in the MikaMonu escrow deposits of $750,000.

Cash provided by financing activities in fiscal 2021, fiscal 2020 and fiscal 2019 primarily consisted of the net proceeds from the sale of common stock pursuant to our employee stock plans. Cash used in financing activities in

40

Table of Contents

fiscal 2020 and fiscal 2019 included the release of escrow deposits related to our acquisition of MikaMonu in November 2015 in the amount of $428,000 and $364,000, respectively, and the payment of consideration of $720,000 in fiscal 2019.

At March 31, 2021, we had total minimum lease obligations of approximately $731,000 from April 1, 2020 through August 31, 2023, under non-cancelable operating leases for our facilities.

While the unprecedented public health and governmental efforts to contain the spread of COVID-19 have created significant uncertainty as to general economic and capital market conditions for the remainder of 2021 and beyond, we believe that our existing balances of cash, cash equivalents and short-term investments, and cash flow expected to be generated from our future operations, will be sufficient to meet our cash needs for working capital and capital expenditures for at least the next 12 months, although we could be required, or could elect, to seek additional funding prior to that time. Our future capital requirements will depend on many factors, including the rate of revenue growth that we experience, the extent to which we utilize subcontractors, the levels of inventory and accounts receivable that we maintain, the timing and extent of spending to support our product development efforts and the expansion of our sales and marketing efforts. A material adverse impact from the COVID-19 global pandemic could result in a need to raise additional capital or incur additional indebtedness to fund strategic initiatives or operating activities, particularly if we pursue additional acquisitions of businesses, products or technologies. We cannot assure you that additional equity or debt financing, if required, will be available on terms that are acceptable or at all.

Contractual Obligations

​

The following table describes our contractual obligations as of March 31, 2021:

​

As of March 31, 2021, the current portion of our unrecognized tax benefits was $0, and the long-term portion was $0.

In connection with the acquisition of MikaMonu on November 23, 2015, we are required to make contingent consideration payments to the former MikaMonu shareholders conditioned upon the achievement of certain revenue targets for products based on the MikaMonu technology. As of March 31, 2021, the accrual for potential payment of contingent consideration was $4.2 million.

Critical Accounting Policies and Estimates

The preparation of our consolidated financial statements and related disclosures in conformity with accounting principles generally accepted in the United States (“GAAP”) requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. Significant estimates are inherent in the preparation of the consolidated financial statements and include estimates affecting revenue recognition, obsolete and excess inventory, the valuation allowance on deferred tax assets, stock-based compensation expense, contingent consideration and the valuation of intangibles and goodwill. We believe that we consistently apply these judgments and estimates and that our financial statements and accompanying notes fairly represent our financial results for all periods presented. However, any errors in these

41

Table of Contents

judgments and estimates may have a material impact on our balance sheet and statement of operations. Critical accounting estimates, as defined by the Securities and Exchange Commission, are those that are most important to the portrayal of our financial condition and results of operations and require our most difficult and subjective judgments and estimates of matters that are inherently uncertain. Our critical accounting estimates include those regarding revenue recognition, the valuation of inventories, accounting for income taxes, stock-based compensation expense, contingent consideration and the valuation of intangibles and goodwill.

Revenue Recognition. We determine revenue recognition through the following steps: (1) identification of the contract with a customer; (2) identification of the performance obligations in the contract; (3) determination of the transaction price; (4) allocation of the transaction price to the performance obligations in the contract; and (5) recognition of revenue when, or as, we satisfy a performance obligation.

The majority of our customer contracts, which may be in the form of purchase orders, contracts or purchase agreements, contain performance obligations for delivery of agreed upon products. Delivery of all performance obligations contained within a contract with a customer typically occurs at the same time (or within the same accounting period). Transfer of control typically occurs at the point at which delivery has occurred, title and the risks and rewards of ownership have passed to the customer, and the Company has a right to payment. For all transactions apart from consignment sales, the Company will generally recognize revenue upon shipment of the product. For consignment sales, revenue is recognized at the time that the product is pulled from consignment warehouses.

Because all our performance obligations relate to contracts with a duration of less than one year, we elected to apply the optional exemption practical expedient provided in Topic 606 and, therefore, are not required to disclose the aggregate amount of the transaction price allocated to performance obligations that are unsatisfied or partially unsatisfied at the end of the reporting period.

We adjust the transaction price for variable consideration. Variable consideration is not typically significant and primarily results from stock rotation rights and quick pay discounts provided to our distributors. As a practical expedient, we recognize the incremental costs of obtaining a contract, specifically commission expenses that have a period of benefit of less than twelve months, as an expense when incurred. Additionally, we have adopted an accounting policy to recognize shipping costs that occur after control transfers to the customer as a fulfillment activity.

Our contracts with customers do not typically include extended payment terms. Payment terms vary by contract type and type of customer and generally range from 30 to 60 days from shipment. Additionally, we have a right to payment upon shipment.

We record revenue net of sales tax, value added tax, excise tax and other taxes collected concurrent with product sales. The impact of such taxes on products sales is immaterial. We have also elected to recognize the cost for freight and shipping when control over the products sold passes to customers and revenue is recognized.

Valuation of Inventories.    Inventories are stated at the lower of cost or net realizable value, cost being determined on a weighted average basis. Our inventory write-down allowance is established when conditions indicate that the selling price of our products could be less than cost due to physical deterioration, obsolescence, changes in price levels, or other causes. We consider the need to establish the allowance for excess inventory generally based on inventory levels in excess of 12 months of forecasted demand for each specific product. Inventory consists of finished goods at our premises or consignment warehouses, work in progress at our premises or our contract manufacturers and finished goods at distributors that have stock rotation rights and takes into account any un-cancellable purchase commitments. Historically, it has been difficult to forecast customer demand especially at the part-number level. Many of the orders we receive from our customers and distributors request delivery of product on relatively short notice and with lead times less than our manufacturing cycle time. In order to provide

42

Table of Contents

competitive delivery times to our customers, we build and stock a certain amount of inventory in anticipation of customer demand that may not materialize. Moreover, as is common in the semiconductor industry, we may allow customers to cancel orders with minimal advance notice. Thus, even product built to satisfy specific customer orders may not ultimately be required to fulfill customer demand. Nevertheless, at any point in time, some portion of our inventory is subject to the risk of being materially in excess of our projected demand. Additionally, our average selling prices could decline due to market or other conditions, which creates a risk that costs of manufacturing our inventory may not be recovered. These factors contribute to the risk that we may be required to record additional inventory write-downs in the future, which could be material. In addition, if actual market conditions are more favorable than expected, inventory previously written down may be sold to customers resulting in lower cost of sales and higher income from operations than expected in that period.

Accounting for Income Taxes.    We account for income taxes under the liability method, whereby deferred tax assets and liabilities are determined based on the difference between the financial statement and tax bases of assets and liabilities using enacted tax rates in effect for the year in which the differences are expected to affect taxable income. We make certain estimates and judgments in the calculation of tax liabilities and the determination of deferred tax assets, which arise from temporary differences between tax and financial statement recognition methods. We record a valuation allowance to reduce our deferred tax assets to the amount that management estimates is more likely than not to be realized. As of March 31, 2021, our net deferred tax assets of $13.0 million are subject to a valuation allowance of $13.0 million. If, in the future we determine that we are likely to realize all or part of our net deferred tax assets, an adjustment to deferred tax assets would be added to earnings in the period such determination is made.

In addition, the calculation of tax liabilities involves inherent uncertainty in the application of complex tax laws. We record tax reserves for additional taxes that we estimate we may be required to pay as a result of future potential examinations by federal and state taxing authorities. If the payment ultimately proves to be unnecessary, the reversal of these tax reserves would result in tax benefits being recognized in the period we determine such reserves are no longer necessary. If an ultimate tax assessment exceeds our estimate of tax liabilities, an additional charge to provision for income taxes will result.

Authoritative guidance prescribes a comprehensive model for how a company should recognize, measure, present, and disclose in its financial statements uncertain tax positions that the company has taken or expects to take on a tax return (including a decision whether to file or not to file a return in a particular jurisdiction). Under this guidance, the financial statements will reflect expected future tax consequences of such positions presuming the taxing authorities' full knowledge of the position and all relevant facts, but without considering time values.

Stock-Based Compensation Expense.  Stock-based compensation expense recognized in the statement of operations is based on options ultimately expected to vest, reduced by the amount of estimated forfeitures. We chose the straight-line method of allocating compensation cost over the requisite service period of the related award in accordance with the authoritative guidance. We calculated the expected term based on the historical average period of time that options were outstanding as adjusted for expected changes in future exercise patterns, which, for options granted in fiscal 2021, 2020 and 2019, resulted in an expected term of approximately five years. We used our historical volatility to estimate expected volatility in fiscal 2021, 2020 and 2019. The risk-free interest rate is based on the U.S. Treasury yields in effect at the time of grant for periods corresponding to the expected life of the options. The dividend yield is 0% based on the fact that we have never paid dividends and have no present intention to pay dividends. Determining some of these assumptions requires significant judgment and changes to these assumptions could result in a significant change to the calculation of stock-based compensation in future periods.

Cash flows, if any, resulting from the tax benefits from tax deductions in excess of the compensation cost recognized for those options (excess tax benefits) are classified as financing cash flows.

43

Table of Contents

As stock-based compensation expense recognized in the Consolidated Statements of Operations is based on awards ultimately expected to vest, it has been reduced for estimated forfeitures. We estimate forfeitures at the time of grant and revise the original estimates, if necessary, in subsequent periods if actual forfeitures differ from those estimates.

We have no stock-based compensation arrangements with non-employees except for stock options granted to our non-employee directors.

Contingent Consideration. The fair value of the contingent consideration liability potentially payable in connection with our acquisition of MikaMonu was initially determined as of the acquisition date using unobservable inputs. These inputs included the estimated amount and timing of future cash flows, the probability of success (achievement of the various contingent events) and a risk-adjusted discount rate to adjust the probability-weighted cash flows to their present value. Subsequent to the acquisition date, at each reporting period, the contingent consideration liability will be re-measured at its then current fair value with changes recorded in the Consolidated Statements of Operations. Changes in any of the inputs may result in material adjustments to the recorded fair value.

Valuation of Goodwill and Intangibles. Goodwill represents the difference between the purchase price and the estimated fair value of the identifiable assets acquired and liabilities assumed in a business combination. We test for goodwill impairment on an annual basis, or more frequently if events or changes in circumstances indicate that the asset is more likely than not impaired. We have one reporting unit. We assess goodwill for impairment on an annual basis on the last day of February in the fourth quarter of our fiscal year.

As of March 31, 2021, we had a goodwill balance of $8.0 million. The goodwill resulted from the acquisition of MikaMonu in fiscal 2016.

We completed our annual impairment test during the fourth quarter of fiscal 2021 and concluded that there was no impairment, as the fair value of our sole reporting unit exceeded its carrying value. No triggering event has taken place subsequent to the fiscal 2021 annual assessment. However, a sustained decline in our stock price could constitute a triggering event that would require an interim assessment for potential goodwill impairment in fiscal 2022.

​

Intangible assets with finite useful lives are amortized over their estimated useful lives, generally on a straight-line basis over five to fifteen years. We review identifiable amortizable intangible assets for impairment whenever events or changes in circumstances indicate that the carrying value of the assets may not be recoverable. Determination of recoverability is based on the lowest level of identifiable estimated undiscounted cash flows resulting from use of the asset and its eventual disposition. Measurement of any impairment loss is based on the excess of the carrying value of the asset over its fair value. Based on the uncertainty of forecasts, unforeseen events such as the failure to generate revenue from the anticipated product launch could result in impairment in the future.

​

Off-Balance Sheet Arrangements

At March 31, 2021, we did not have any off-balance sheet arrangements or relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. Accordingly, we are not exposed to the type of financing, liquidity, market or credit risk that could arise if we had engaged in such relationships.

Recent Accounting Pronouncements

Please refer to Note 1 to our consolidated financial statements appearing under Part II, Item 8 for a discussion of recent accounting pronouncements that may impact the Company.

44

Table of Contents

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

Foreign Currency Exchange Risk.    Our revenues and expenses, except those expenses related to our operations in Israel and Taiwan, including subcontractor manufacturing expenses in Taiwan, are denominated in U.S. dollars. As a result, we have relatively little exposure for currency exchange risks, and foreign exchange losses have been minimal to date. We do not currently enter into forward exchange contracts to hedge exposure denominated in foreign currencies or any other derivative financial instruments for trading or speculative purposes. In the future, if we believe our foreign currency exposure has increased, we may consider entering into hedging transactions to help mitigate that risk.

Interest Rate Sensitivity.    We had cash, cash equivalents, short term investments and long-term investments totaling $59.7 million at March 31, 2021. These amounts were invested primarily in money market funds, certificates of deposit and agency bonds. The cash, cash equivalents and short-term marketable securities are held for working capital purposes. We do not enter into investments for trading or speculative purposes. Due to the short-term nature of these investments, we believe that we do not have any material exposure to changes in the fair value of our investment portfolio as a result of changes in interest rates. We believe a hypothetical 100 basis point increase in interest rates would not materially affect the fair value of our interest-sensitive financial instruments. Declines in interest rates, however, will reduce future investment income.

​

45

Table of Contents

Item 8.    Financial Statements and Supplementary Data

GSI TECHNOLOGY, INC.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

​

​

​

​

46

Table of Contents

Report of Independent Registered Public Accounting Firm

​

Shareholders and Board of Directors

GSI Technology, Inc.

Sunnyvale, California

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated balance sheets of GSI Technology, Inc. (the “Company”) as of March 31, 2021 and 2020, the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for each of the three years in the period ended March 31, 2021, and the related notes (collectively referred to as the “consolidated financial statements”). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company at March 31, 2021 and 2020, and the results of its operations and its cash flows for each of the three years in the period ended March 31, 2021, in conformity with accounting principles generally accepted in the United States of America.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (“PCAOB”), the Company's internal control over financial reporting as of March 31, 2021, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) and our report dated June 4, 2021 expressed an unqualified opinion thereon.

Change in Accounting Principle

As discussed in Note 1 to the consolidated financial statements, the Company has changed its accounting method for accounting for leases in fiscal year 2020 due to the adoption of Topic 842: Leases using a modified retrospective approach.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud.

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matters

The critical audit matters communicated below are matters arising from the current period audit of the consolidated financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matters below, providing separate opinions on the critical audit matters or on the accounts or disclosures to which they relate.

47

Table of Contents

Valuation of Inventories

As described in Notes 1 and 4 to the consolidated financial statements, the Company’s consolidated inventory balance is stated at lower of cost or net realizable value. The valuation of inventories is adjusted by the Company when conditions indicate a decline in value due to obsolescence and is generally adjusted based on estimates for inventory levels in excess of forecasted demand for a specific product.  Forecasting customer demand can be challenging due to relatively short order lead times from customers and contract terms allowing customers to cancel orders with minimal advance notice.

We identified the valuation of inventories as a critical audit matter due to the significant judgment and estimates required by management. Determining whether a decline in value has occurred requires management’s complex judgments related to: (i) future demand for excess units on hand based on historical sales and expected future orders, and (ii) obsolescence of certain products based on changes in technology and demand. Auditing these judgments was especially challenging and involved subjective auditor judgment to evaluate sales trends and evolving customer demands.

The primary procedures we performed to address this critical audit matter included:

Valuation of Contingent Consideration

As described in Note 14 to the consolidated financial statements, on November 23, 2015, the Company acquired all of the outstanding stock of MikaMonu Group Ltd. (“MikaMonu”) for cash and future contingent consideration payable to former MikaMonu shareholders based on the achievement of certain milestones, including development of qualifying products and meeting certain revenue targets from the sale of those products. Since the initial measurement at the acquisition date, the liability has been re-measured to fair value at each reporting period. The inputs used in the valuation include the estimated amount and timing of future cash flows, the probability of success (achievement of the various contingent events) and a risk-adjusted discount rate to adjust the probability-weighted cash flows to their present value.

We identified the valuation of the contingent consideration liability as a critical audit matter due to the significant judgment required to estimate the fair value at the balance sheet date. Valuation of the contingent consideration liability involves management’s complex judgments related to determining: (i) the continued appropriateness of the valuation model selected, and (ii) the reasonableness of inputs and assumptions used in the valuation model, including estimated amount and timing of future cash flows, the probability of success and the risk-adjusted discount rate. Auditing these inputs and assumptions involved especially challenging and subjective auditor judgement due to the nature and extent of procedures performed and the specialized knowledge required to audit the valuation.

The primary procedures we performed to address this critical audit matter included:

​

/s/ BDO USA, LLP

We have served as the Company's auditor since 2017.

San Jose, California

June 4, 2021

48

Table of Contents

Report of Independent Registered Public Accounting Firm

Shareholders and Board of Directors

GSI Technology, Inc.

Sunnyvale, California

Opinion on Internal Control over Financial Reporting

We have audited GSI Technology, Inc.’s (the “Company’s”) internal control over financial reporting as of March 31, 2021, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (the “COSO criteria”). In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of March 31, 2021, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (“PCAOB”), the consolidated balance sheets of the Company as of March 31, 2021 and 2020, the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for each of the three years in the period ended March 31, 2021, and the related notes and our report dated June 4, 2021 expressed an unqualified opinion thereon.

​

Basis for Opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Item 9A, Controls and Procedures. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit of internal control over financial reporting in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and Limitations of Internal Control over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

​

/s/ BDO USA, LLP

San Jose, California

June 4, 2021

49

Table of Contents

GSI TECHNOLOGY, INC.

CONSOLIDATED BALANCE SHEETS

​

The accompanying notes are an integral part of these consolidated financial statements.

​

50

Table of Contents

GSI TECHNOLOGY, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

The accompanying notes are an integral part of these consolidated financial statements.

​

51

Table of Contents

GSI TECHNOLOGY, INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)

The accompanying notes are an integral part of these consolidated financial statements.

​

52

Table of Contents

GSI TECHNOLOGY, INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY