HURCO COMPANIES INC - Annual Report: 2016 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

Commission File No. 0-9143

HURCO COMPANIES, INC.

(Exact name of registrant as specified in its charter)

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ¨  No x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d). Yes ¨  No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months, and (2) has been subject to the filing requirements for the past 90 days.  Yes x  No ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).   Yes x  No ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer ¨  Accelerated filer x  Non-accelerated filer ¨  Smaller reporting company ¨

(Do not check if a smaller reporting company)

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨  No x

The aggregate market value of the registrant’s voting stock held by non-affiliates as of April 29, 2016 (the last business day of our most recently completed second quarter) was $212,837,000.

The number of shares of the registrant’s common stock outstanding as of December 12, 2016 was 6,573,103.

DOCUMENTS INCORPORATED BY REFERENCE: Portions of the registrant’s Proxy Statement for its 2017 Annual Meeting of Shareholders (Part III).

Forward-Looking Statements

This report contains certain statements that are forward-looking statements within the meaning of federal securities laws. Forward-looking statements can be identified by the fact that they do not relate strictly to historical or current facts. When used in this report, the words “may”, “will”, “should”, “would” ,“could”, “anticipate”, “expect”, “plan”, “seek”, “believe”, “predict”, “estimate”, “potential”, “project”, “target”, “forecast”, “intend”, “strategy”, “future”, “opportunity”, “assume”, “guide”, and similar expressions are intended to identify forward-looking statements. Forward-looking statements are based on current expectations and assumptions that are subject to risks and uncertainties that could cause actual results to differ materially from such forward-looking statements. These risks and uncertainties include, but are not limited to, the risks and other important factors under the heading “Risk Factors” in Part I, Item 1A of this report. You should understand that it is not possible to predict or identify all factors that could cause actual results to differ materially from forward-looking statements. Consequently, you should not consider any list or discussion of such factors to be a complete set of all potential risks or uncertainties. Readers of this report are cautioned not to place undue reliance on these forward-looking statements. While we believe the assumptions on which the forward-looking statements are based are reasonable, there can be no assurance that these forward-looking statements will prove to be accurate. This cautionary statement is applicable to all forward-looking statements contained in this report. We expressly disclaim any obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise. You are advised, however, to consult any further disclosures we make on related subjects in our Form 10-Q, 8-K and 10-K reports and our other filings with the Securities and Exchange Commission (“SEC”).

PART I

General

Hurco Companies, Inc. is an international, industrial technology company.  We design, manufacture and sell computerized (i.e., Computer Numeric Control (“CNC”) machine tools, consisting primarily of vertical machining centers (mills) and turning centers (lathes), to companies in the metal cutting industry through a worldwide sales, service and distribution network.  Although the majority of our computer control systems and software products are proprietary, they predominantly use industry standard personal computer components.  Our computer control systems and software products are primarily sold as integral components of our computerized machine tool products.  We also provide machine tool components, software options, control upgrades, accessories and replacement parts for our products, as well as customer service and training and applications support. As used in this report, the words “we”, “us”, “our”, “Hurco” and the “Company” refer to Hurco Companies, Inc. and its consolidated subsidiaries.

Since our founding in 1968, we have been a leader in the introduction of interactive computer control systems that automate manufacturing processes and improve productivity in the metal parts manufacturing industry. We pioneered the application of microprocessor technology and conversational programming software for use in machine tools.  Our computer control systems can be operated by both skilled and unskilled machine tool operators and yet are capable of instructing a machine to perform complex tasks.  The combination of microprocessor technology and patented interactive, conversational programming software in our computer control systems enables operators on the production floor to quickly and easily create a program for machining a particular part from a blueprint or computer aided design file and immediately begin machining that part.

Our executive offices and principal design and engineering operations are headquartered in Indianapolis, Indiana, U.S.  Sales, application engineering and service subsidiaries are located in China, France, Germany, India, Italy, Poland, Singapore, South Africa, Taiwan, the United Kingdom, and the U.S. We have manufacturing and assembly operations in Taiwan, the U.S., Italy and China, and distribution facilities in the U.S., the Netherlands, and Taiwan.

During the third quarter of fiscal 2015, we acquired the assets of the machine tool business of Milltronics Manufacturing Company, Inc. and we are operating this U.S. business as a product line through our wholly-owned subsidiary, Milltronics USA, Inc. (“Milltronics”). Milltronics manufactures and sells CNC knee mills, tool room bed mills, vertical machining centers, combination lathes, slant-bed lathes, horizontal machining centers, and bridge mills. During the third quarter of fiscal 2015, we also acquired the assets of the machine tool business of Takumi Machinery Co., Ltd. (“Takumi”), a Taiwanese company that designs and manufactures CNC vertical machining centers, double column machining centers, high speed bridge machines and other machine tools, with sales primarily in Taiwan, China and Europe. Takumi machines are equipped with industrial controls from Fanuc^®, Siemens^®, Mitsubishi^® or Heidenhain^® which can be used in high-volume parts manufacturing. We are operating this Taiwanese business as a product line through our wholly-owned subsidiary Hurco Manufacturing Limited (“HML”).

The Milltronics and Takumi product lines contribute to our efforts to expand our consolidated product range, customer base and global platform, and we believe may accelerate emerging market penetration, particularly in strategic markets such as China and South America.

Our strategy is to design, manufacture and sell a comprehensive line of computerized machine tools that help customers in the worldwide metal cutting market increase productivity and profitability. The majority of our machine tools employ proprietary, interactive, computer control technology that increases productivity through ease of operation via interactive conversational and graphical programming software. All of our machine tools deliver high levels of machine performance (speed, accuracy and surface finish quality) that increases productivity. We routinely expand our product offerings to meet customer needs, which has led us to design and manufacture more complex machining centers with advanced capabilities.  We bring a disciplined approach to strategically enter new geographic markets, as appropriate.

Industry

Machine tool products are considered capital goods, which makes them part of an industry that has historically been highly cyclical. 

Although industry association data for the U.S. machine tool market is available, that market only accounts for approximately 9% of worldwide consumption.  Reports available for the U.S. machine tool market include:

A limited amount of information is available for foreign markets, and different reporting methodologies are used by various countries.  Machine tool consumption data, published by Gardner Publications, Inc., calculates machine tool consumption annually by country.  It is important to note that data for foreign countries are based on government reports that may lag 6 to 12 months and, therefore, are unreliable for forecasting purposes. 

*Fanuc® is a registered trademark of GE Fanuc Automation Americas, Inc. Siemens® is a registered trademark of Siemens AG. Mitsubishi® is a registered trademark of Mitsubishi Electric Corporation. Heidenhain® is a registered trademark of HEIDENHAIN CORPORATION, a wholly owned subsidiary of the German company DR. JOHANNES HEIDENHAIN GmbH.

Demand for capital equipment can fluctuate significantly during periods of changing economic conditions.  Manufacturers and suppliers of capital goods, such as our company, are often the first to experience these changes in demand. Additionally, since our typical order backlog is approximately 45 days, it is difficult to estimate demand with any reasonable certainty. Therefore, we do not have the benefit of relying on the common leading indicators that other industries use for market analysis and forecasting purposes.

Products

Our core products consist of general purpose computerized machine tools for the metal cutting industry, principally, vertical machining centers (mills) and turning centers (lathes). The majority of our machine tools are equipped and integrated fully with our proprietary software and computer control systems, while the remaining machine tools are equipped with industry standard controls. Additionally, we produce and distribute software options, control upgrades, hardware accessories and replacement parts for our machine tool product lines, and we provide operator training and support services to our customers. We also produce computer control systems and related software for press brake applications that are sold as retrofit units for installation on existing or new press brake machines.

The following table sets forth the contribution of each of our product groups and services to our total revenues during each of the past three fiscal years (in thousands):

Net Sales and Service Fees by Product Category

* Amounts shown include sales of Milltronics and Takumi computerized machine tools to third parties since the respective dates of those acquisitions.

^† Amounts shown do not include computer control systems and software sold as an integrated component of computerized machine systems.

Product Portfolio by Brand

We have three brands of CNC machine tools in our product portfolio: Hurco is the premium brand focused on sophisticated technology. Milltronics is the entry level brand with a simplified control and straightforward feature sets. Takumi is an industry standard brand with machines that are equipped with industry standard controls instead of the proprietary controls found on Hurco and Milltronics machines. Typically, manufacturing facilities that use industry standard controls focus on medium to high production, wherein they run large batches of a few types of parts instead of small batches of many different types of parts. In addition, through our wholly–owned subsidiary LCM Precision Technology S.r.l. (“LCM”), we produce machine tool components and accessories. The main product categories of each brand are outlined below.

The Hurco, Milltronics and Takumi product lines represent a comprehensive product portfolio with more than 150 different models. The combined machine tool product lines also provide benefits related to the development of product enhancements, technologies and models due to leverage of shared resources and cross-utilization of proven engineering designs that allow us to achieve manufacturing cost reductions from economies of scale and manufacturing efficiencies.

Hurco CNC Machine Tools

Hurco computerized machine tools are equipped with a fully integrated interactive computer control system that features our proprietary WinMax^® software. Our computer control system enables a machine tool operator to create complex two-dimensional or three-dimensional machining programs directly from an engineering drawing or computer-aided design geometry file. An operator with little or no machine tool programming experience can successfully create a program with minimal training and begin machining the part in a short period of time.  The control features an operator console with active touch, and incorporates an upgradeable personal computer (PC) platform using a high speed processor with solid rendering graphical programming.  In addition, WinMax^® has a Windows^®† based operating system that enables users to improve shop floor flexibility and software productivity. Companies using computer controlled machine tools are better able to:

Our Windows^® based control facilitates our ability to meet these customer needs. The familiar Windows^® operating system coupled with our intuitive conversational style of program creation allows our customers’ operators to create and edit part-making programs without incurring the incremental overhead of specialized computer aided design and computer aided manufacturing programmers. With the ability to transfer most computer aided design data directly into a Hurco program, programming time can be significantly reduced.

Machine tool products today are being designed to meet the demand for machining complex parts with greater part accuracies.  Our proprietary controls with WinMax^® software and high speed processors efficiently handle the large amounts of data these complex part-making programs require, which enable our customers to create parts with higher accuracy at faster speeds. We continue to add technology to our control design as it becomes available. For example, UltiMotion, our patented motion control system, provides significant cycle time reductions and increases the quality of a part’s surface finish. This technology differentiates us in the marketplace and is incorporated into our control.

Our offering of Hurco machining centers, currently equipped with either a dual touch-screen console or a single touch-screen console, consists of the following product ines:

VM Product Line

The VM product line consists of moderately priced vertical machining centers for the entry-level market.

The design premise of the machining center with a large work cube and a small footprint optimizes the use of available floor space. The VM line consists of five models in four sizes with X-axis (horizontal) travels of 18, 26, 40, and 50 inches.

VMX Product Line

The VMX product line consists of higher performing vertical machining centers aimed at manufacturers that require greater part accuracy. It is our flagship series of machining centers. The VMX line consists of 12 models in eight sizes with X-axis travels of 24, 26, 30, 42, 50, 60, 64, and 84 inches.

^†Windows^® is a registered trademark of Microsoft Corporation in the United States and other countries.

Five-Axis Product Line

The five-axis product line is targeted at manufacturers seeking to produce multi-sided parts or true five axis in a single setup. Machines in this product line can yield significant productivity gains for manufacturers that previously had to process each side of a part separately. Additionally, investing in five-axis technology helps our customers to expand their customer base, as they are able to bid on more complex projects that require simultaneous five-axis operations. The five-axis product line consists of 18 models with three different configurations: swivel head, trunnion table, and cantilever.

HS Product Line

Due to the integral, motorized spindle with a base speed of 18,000 rpm, the HS product line is desirable for the die and mold industry because of that industry’s particular interest in the improvement of surface finish quality and the reduction of cycle time. Additionally, this product line offers us the opportunity to expand our customer base to manufacturers that produce larger batches. The HS product line consists of four models with X-axis travels of 24, 30, 42, and 60 inches.

HMX Product Line

The HMX product line is beneficial to manufacturers entering production manufacturing versus small batch manufacturing. The HMX machines have expanded tool capacity, a comprehensive chip management system, a built-in pallet changer, and a box-in-box design supported at both the top and bottom to increase rigidity for long production runs and heavy cuts. The HMX product line consists of three models in three sizes with X-axis travels of 24, 32, and 41 inches.

HBMX Product Line

The HBMX product line is beneficial to manufacturers that build custom machinery and parts for a multitude of industries, such as packaging, pharmaceutical, automotive, energy, and medical. Additionally, boring mills are also used to repair and/or rebuild large components. The HBMX boring mill product line consists of four models with X-axis travels of 55, 79, 94, and 120 inches.

TM/TMM Product Line

The TM/TMM product line of slant-bed lathes (horizontal turning centers) is designed for entry-level job shops and contract manufacturers seeking efficient processing of small to medium lot sizes. There is one TM model in seven sizes, measured by chuck size: the TM6, TM8, TM10, TM12, TM18, TM18L, and TM18BB. The TM18BB big bore turning center targets the energy and aerospace industries because it has a larger chuck diameter and bigger bar capacity for larger parts. We added motorized tooling on the lathe turret to further enhance the capability of the TM turning centers and designated it as the TMM product line. These turning centers with live tooling allow our customers to complete a number of secondary milling, drilling and tapping operations while the part is still held in the chuck after the turning operations are complete, which provides significant productivity gains. The TMM product line consists of three models: TMM8, TMM10, and TMM12.

TMX Product Line

The TMX product line consists of high performance turning centers.   There are six models in two sizes. The TMXMY models are equipped with an additional axis and motorized live tooling while the TMXMYS models also have an additional spindle.

DCX Product Line

The double column DCX series includes five models in three sizes. These 2-meter, 3-meter, and 4-meter machining centers are designed to facilitate production of large parts and molds often required by the aerospace, energy and custom machinery industries.

New Product Lines

We introducted the HTM30, an open-bed mill that is beneficial for tool room applications. The BX40 is a bridge mill designed for heavy cuts with a high-speed 18K spindle utilizing the frame design of the bridge mill with a trunnion table for 5-axis machining. The HM1700i and HM1700Ri are both horizontal mills that are equipped with a spindle that is ideal for both high and low end torque operations; however, the HM1700Ri has an embedded rotary torque table to facilitate increased production efficiencies. Additionally, we introduced a 3D print head technology that allows a Hurco CNC machine to be used for 3D printing, which is advantageous for prototyping.

Milltronics CNC Machine Tools

Our Milltronics line of CNC machine tools is designed for excellent value with more standard features for the price versus market leaders. We manufacture and sell these machine tools with fully integrated interactive computer control systems that are also compatible with G & M Code programs (generated from CAD/CAM software) and conversational visual aid programming. These straightforward and easy-to-use control systems are available in two versions, the Series 8200-B for tool room products and the more advanced Series 9000 offered on our new vertical machining centers and bridge mills.

The Milltronics portfolio consists of the following product lines:

VM General Purpose (GP) Product Line

The VM-GP product line consists of attractively-priced vertical machining centers designed for job shops, prototype, R & D and other general machining applications. These belt-driven models are 40-taper and available in four different sizes – all with the Series 9000 control. Customers can choose models with X-axis (horizontal) travels of 25, 30, 40 or 50 inches.

VM Inline Performance (IL) Product Line

The VM-IL product line consists of moderately-priced performance vertical machining centers for high-speed applications such as tool, die and mold, aerospace or medical machining. Featuring heavier castings, faster motion and inline spindles, these 40-taper machines include the Series 9000 control and are available in four sizes. Models include X-axis travels of 30, 42, 50 or 60 inches.

VM Extra Power (XP) Product Line

The VM-XP product line consists of moderately-priced vertical machining centers for more demanding metal removal applications such as castings or forgings. These 50-taper models are either gear driven or heavy-duty belt driven and include the Series 9000 control. Customers can choose from three different models with X-axis travels of 43, 50 or 60 inches.

BR Product Line

The BR product line consists of high-speed bridge mills that are used in pattern shops and the aerospace industry in addition to job shops, due to the large table and travels that support a wide range of part sizes. BR machines have inline spindles and are available as six models in three sizes with X-axis travels of 100, 150, and 200 inches. BR machines offer the Series 9000 control.

MM/MB/RH Product Line

Products with the MM/MB or RH designation are part of the tool room bed mill category, which are machines that do not have an enclosure, also referred to as open bed machines. Typical applications include general machining, job shops, prototype or maintenance and repair. Available with quill head or rigid head designs, there are six models in four sizes with X-axis travels of 30, 40, 60 and 78 inches. These easy-to-use machines feature the Series 8200-B control.

SL Product Line

The SL product line of slant-bed lathes (horizontal turning centers) is designed for entry-level job shops and contract manufacturers seeking efficient processing of small to medium lot sizes. There are three models with chuck sizes of 6, 10, and 12 inches. These compact machines feature the Series 8200-B control.

ML Product Line

The ML product line consists of combination lathes that the customer can configure for either tool room or production applications with the option to add live tooling.   There are 17 models available in a variety of thru hole sizes and in the following six swing-over bed diameters: 17, 19, 23, 27, 36, and 39.7 inches. These flexible machines feature the Series 8200-B control.

Takumi CNC Machine Tools

Our Takumi machine tools feature industry standard CNC controls, including Fanuc^®, Siemens^®, Mitsubishi^® or Heidenhain^®. Models include drill and tap machines; three-axis vertical machining centers with linear guides; three-axis vertical machining centers with box ways; high-speed, double column vertical machining centers; and heavy duty, double column machining centers. With the addition of the Takumi brand, we have expanded our customer base to include manufacturers who opt for industrial controls. Generally, manufacturers who use industrial controls have production-oriented operations where they run medium to large batches of just a few different types of parts.

The Takumi portfolio consists of the following product lines: 

VT Series

The VT Series includes one high-speed drill and tap machine. Model VT500 features fast tool change times and rapid spindle acceleration/deceleration. This three-axis machine is designed for high volume production applications such as automotive parts or electronics components.

VC Series

The VC Series vertical machining centers are fast, three-axis linear guide machining centers designed for customers doing batch or production work. The VC machines are available in two sizes with X-axis travels of 34 and 42 inches.

V Series

The V Series vertical machining centers are heavy duty, box way machines built for tough applications such as roughing cast iron. These three-axis, massive machines feature belt or geared spindles to provide maximum torque. The V Series product line includes eight models with X-axis travels of 39, 43, 47, 60, 70, 78, 86, and 126 inches.

H Series

Designed to produce parts that require high precision and superior surface finishes, H Series machines offer an extremely rigid and thermally stable double column design. These three-axis models feature high-speed direct drive or built-in HSK spindles with up to 20,000 rpm, and offer a 24,000 rpm spindle and 36,000 rpm spindle as options. The H Series product line consists of eight models in seven different sizes with X-axis travels of 30, 35, 40, 53, 63, 86, and 126 inches.

G Series

Designed specifically for the machining of graphite or copper electrodes used in electrical discharge machining (EDM), G Series machines offer the same extremely rigid and thermally stable double column design of the H Series, featuring high-speed direct drive or built-in HSK spindles with up to 20,000 rpm. The G Series product line consists of two models with X-axis travels of 30 and 40 inches.

BC Series

The BC Series machine is a double column three-axis machining center designed for heavy cutting and applications that require high power and torque, such as mold and die. This model includes a 6,000 rpm geared-head design with X-axis travels of 82 inches.

Other Control Systems and Software

The following machine tool computer control systems and software products are sold directly to end-users and/or to original equipment manufacturers.

Autobend^®

Autobend^® computer control systems are applied to metal bending press brake machines that form parts from sheet metal and steel plate.  They consist of a microprocessor-based computer control and back gauge (an automated gauging system that determines where the bend will be made).  We have manufactured and sold the Autobend^® product line since 1968.  We currently market two models of our Autobend^® computer control systems for press brake machines, in combination with six different back gauges as retrofit units for installation on existing or new press brake machines.

Software Products

In addition to our standard computer control features, we offer software option products for part programming.  These products are sold to users of our Hurco computerized machine tools equipped with our dual touch-screen or single touch-screen consoles featuring WinMax^® control software.  Each international division packages the options as appropriate for its market. The most common options include: Advanced Verification Graphics, Swept Surface, DXF Transfer, UltiMonitor, UltiPocket with Helical Ramp Entry and Insert Pockets, Conversational Part and Tool Probing, Tool and Material Library, NC/Conversational Merge, Job List, Stream Load, Linear Thermal Compensation, Thread Repair, and Simultaneous Five-Axis Contouring.

The Advanced Verification Graphics option displays a picture of the rendered part on the screen of the control that can be viewed from any angle. The detail allows the customer to evaluate how the part is programmed to be machined before cutting commences, which eliminates the need to scrap expensive material.

Our Swept Surface software option simplifies programming of 3D contours and significantly reduces programming time.

The DXF Transfer software option increases operator productivity because it eliminates manual data entry of part features by transferring AutoCAD^®* drawing files directly into our computer control or into our desktop programming software, WinMax^® Desktop.

UltiMonitor is a web-based productivity, management and service tool that enables customers to monitor, inspect and receive notifications about their Hurco machines from any location where they can access the internet. Customers can transfer part designs, receive event notifications via email or text, access diagnostic data, monitor the machine via webcam and communicate with the machine operator.

* AutoCAD® is a registered trademark of Autodesk, Inc., and/or its subsidiaries/ affiliates in the U.S. and/or other countries.

UltiPocket with Helical Ramp Entry and Insert Pockets automatically calculates the tool path around islands, eliminating the arduous task of plotting these shapes.  Islands can also be rotated, scaled and repeated.

Conversational Part and Tool Probing options permit the computerized dimensional measurement of machined parts and the associated cutting tools.  This “on-machine” technique improves the throughput of the measurement process when compared to traditional “off-machine” approaches.

The Tool and Material Library option stores the tool and material information with the machine instead of storing it with each individual part program. The user enters the tool data and geometry one time and chooses the particular tool from the list when it is needed. Additionally, the library reads the part program and automatically locates the tool or displays an alert if the tool does not exist. In addition to saving time, the Tool and Material Library eliminates the need to enter information repeatedly, and can prevent common tool crash conditions.

NC/Conversational Merge lets the user incorporate conversational features, such as tool probing, pattern operations, and scaling into existing G-Code programs.

Job List provides an intuitive way to group files together and run them sequentially without operator intervention, which promotes automation, lights-out machining, program stitching, file bundling, and adaptive processes.

Stream Load allows the user to run very large NC files without the need to upload the entire file into the control’s memory to avoid exceeding memory limits.

Linear Thermal Compensation is a feature that allows the user to specify corrections to compensate for the effects of thermal growth in high speed machining applications.

Thread Repair is a feature for turning applications that provides an efficient way to repair existing threads, which is especially beneficial for large pipes and other parts manufactured for the oil/energy sector.

Simultaneous Five-Axis Contouring software enables a five-axis machine to command motion concurrently on all axes. This allows the user to create continuous tool-paths along complex geometries with only a single machine/part setup, providing increased productivity along with the performance benefits of using shorter cutting tools. The sale of simultaneous five-axis contouring software is subject to government export licensing requirements.

LCM Machine Tool Components and Accessories

Based in Italy, LCM designs, manufactures and sells mechanical and electro-mechanical components and accessories for machine tools. LCM’s direct drive spindle, swivel head, and rotary torque table are used in our SRT line of five-axis machining centers to achieve simultaneous five-axis machining.

CNC Rotary Tables

LCM has five lines of CNC rotary tables for both horizontal and vertical-horizontal positioning. Customers can choose rotary tables with either hydraulic or pneumatic clamping systems. Additionally, LCM offers CNC rotary tables powered by either a torque motor or a high-precision mechanical transmission.

CNC Tilt Tables

LCM has seven lines of CNC tilting rotary tables, of which four lines are intended specifically for five-axis machining centers. Each of the seven lines is differentiated by the technology used for clamping (hydraulic or pneumatic) and by the type of transmission (either mechanical transmission or torque motor).

Swivel Heads and Electro-spindles

LCM has two primary lines of swivel heads that enable the spindle axis to be tilted with continuous motion and one line of electro-spindles (built-in motors for swivel heads). The two lines of swivel heads are differentiated by the type of transmission (either mechanical transmission or torque motor).

Parts and Service

Our service organization provides installation, warranty, operator training and customer support for our products on a worldwide basis.  In the United States, our principal distributors have the primary responsibility for machine installation and warranty service and support for product sales.  Our service organization also sells software options, computer control upgrades, accessories and replacement parts for our products.  Our after-sales parts and service business strengthens our customer relationships and provides continuous information concerning the evolving requirements of end-users.

Manufacturing

Our computerized metal cutting machine tools are manufactured and assembled to our specifications primarily by our wholly-owned subsidiaries in Taiwan (HML) and Waconia, Minnesota (Milltronics). HML and Milltronics conduct final assembly operations and are supported by a network of contract suppliers of components and sub-assemblies that manufacture components for our products. Our facility in Ningbo, China, focuses on the machining of castings to support HML’s production in Taiwan. The LCM line of electro-mechanical components and accessories for machine tools is designed and manufactured in Italy. Our facility in Indianapolis, Indiana, also conducts final assembly operations for certain Hurco VMX machines for the American market and manufactures certain electro-spindle components for LCM.

We have a contract manufacturing agreement for computer control systems with Hurco Automation, Ltd. (“HAL”), a Taiwanese company in which we have a 35% ownership interest.  This company produces all of our computer control systems to our specifications, sources industry standard computer components and our proprietary parts, performs final assembly and conducts test operations.

We work closely with our subsidiaries, key component suppliers and HAL to ensure that their production capacity will be sufficient to meet the projected demand for our machine tool products.  Many of the key components used in our machines can be sourced from multiple suppliers. However, any prolonged interruption of operations or significant reduction in the capacity or performance capability at any of our manufacturing facilities, or at any of our key component suppliers, could have a material adverse effect on our operations.

Marketing and Distribution

We principally sell our products through more than 195 independent agents and distributors throughout North and South America (the Americas), Europe and Asia.  Although some distributors carry competitive products, we are the primary line for the majority of our distributors globally.  We also have our own direct sales and service organizations in China, France, Germany, India, Italy, Poland, Singapore, South Africa, Taiwan, the United Kingdom and certain parts of the United States, which are among the world's principal machine tool consuming markets.

Approximately 91% of the worldwide demand for computerized machine tools and computer control systems is outside of the U.S.  In fiscal 2016, approximately 69% of our revenues were derived from customers outside of the U.S.  No single end-user or distributor of our products accounted for more than 5% of our total sales and service fees. The end-users of our products are precision tool, die and mold manufacturers, independent job shops, specialized short-run production applications within large manufacturing operations operations and manufacturing facilities that focus on medium to high run production wherein they run large batches of a few types of parts instead of small batches of many different parts.  Industries served include aerospace, defense, medical equipment, energy, automotive/ transportation, electronics and computer industries.

We also sell our Autobend^® computer control systems to original equipment manufacturers of new metal fabrication machine tools that integrate them with their own products prior to the sale of those products to their own customers, to retrofitters of used metal fabrication machine tools that integrate them with those machines as part of the retrofitting operation, and to end-users that have an installed base of metal fabrication machine tools, either with or without related computer control systems.

Demand

We believe demand for our products is driven by advances in industrial technology and the related demand for automated process improvements. Other factors affecting demand include:

Demand for our products is also highly dependent upon economic conditions and the general level of business confidence, as well as such factors as production capacity utilization and changes in governmental policies regarding tariffs, corporate taxation, fluctuations in foreign currencies, and other investment incentives. 

Competition

We compete with many other machine tool producers in the United States and foreign countries.   Most of our competitors are larger and have greater financial resources than our company.  Major worldwide competitors include DMG Mori Seiki Co., Ltd., Mazak, Haas Automation, Inc., Hardinge Inc., Doosan, Okuma Machinery Works Ltd, Hyudai and Feeler.  

Through our subsidiary LCM, we compete with manufacturers of machine tool components and accessories such as IBAG, Kessler, Peron Speed, GSA Technology Co., LTD and Duplomatic Automation.

We strive to compete by developing patentable software and other proprietary features that offer enhanced productivity, technological capabilities and ease of use.  We offer our products in a range of prices and capabilities to target a broad potential market.  We also believe that our competitiveness is aided by our reputation for reliability and quality, our strong international sales and distribution organization, and our extensive customer service organization.

Intellectual Property

We consider the majority of our products to be proprietary. Various features of our Hurco and Milltronics control systems and machine tools employ technologies covered by patents and trademarks that are material to our business. We also own additional patents covering new technologies that we have acquired or developed, and that we are planning to incorporate into our control systems in the future.

Research and Development

In the fiscal years set forth below, we incurred both (i) non-capitalized research and development expenditures for new products, significant product improvements and  (ii) capitalized expenditures related to software development projects as follows (in thousands):

Employees

We had approximately 758 full-time employees at the end of fiscal 2016, none of whom are covered by a collective-bargaining agreement or represented by a union. We have experienced no employee-generated work stoppages or disruptions, and we consider our employee relations to be satisfactory.

Geographic Areas

Financial information concerning the geographic areas in which we sell our products is set forth in Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations and in Note 15 of Notes to Consolidated Financial Statements. Some of the risks of doing business on a global basis are described in Item 1A. Risk Factors below.

Backlog

For information on orders and backlog, see Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Availability of Reports and Other Information

Our website can be found at www.hurco.com. We use this website as a means of disclosing pertinent information about the company, free of charge, including:

The information available on our website is not incorporated by reference in, or a part of, this or any other report we file with, or furnish to, the SEC.

In this section we describe what we believe to be the material risks related to our business. The risks and uncertainties described below or elsewhere in this report are not the only ones to which we are exposed. Additional risks and uncertainties not presently known and/or risks we currently deem immaterial may also adversely affect our business and operations. If any of the developments included in the following risks were to occur, our business, financial condition, results of operations, cash flows or prospects could be materially adversely affected.

The cyclical nature of our business causes fluctuations in our operating results.

The machine tool industry is highly cyclical and changes in demand can occur abruptly in the geographic markets we serve. As a result of this cyclicality, we have experienced significant fluctuations in our sales, which, in periods of reduced demand, have adversely affected our results of operations and financial condition.

Uncertain global economic conditions, may adversely affect overall demand.

We typically sell the majority of our larger high-performance VMX machines in Europe, which makes us particularly sensitive to economic and market conditions in that region. Economic uncertainty and business downturns in the U.S., European and Asian Pacific markets adversely affect our results of operations and financial condition.

Our international operations pose additional risks that may adversely impact sales and earnings.

During fiscal 2016, approximately 69% of our revenues were derived from sales to customers located outside of the U.S. In addition, our main manufacturing facilities are located outside of the U.S. Our international operations are subject to a number of risks, including:

Quotas, tariffs, taxes or other trade barriers could require us to change manufacturing sources, reduce prices, increase spending on marketing or product development, withdraw from or not enter certain markets or otherwise take actions that could be adverse to us. Also, in some foreign jurisdictions, we may be subject to laws limiting the right and ability of entities organized or operating therein to pay dividends or remit earnings to affiliated companies unless specified conditions are met. These factors may adversely affect our future operating results. The vast majority of our products are shipped from our manufacturing facility in Taiwan from the Port of Taichung to four ports of destination: Los Angeles, California, Tacoma, Washington, Venlo, the Netherlands, and Shanghai, China. Changes in customs requirements, as a result of national security or other constraints put upon these ports, may also have an adverse impact on our results of operations.

Additionally, we must comply with complex foreign and U.S. laws and regulations, such as the U.S. Foreign Corrupt Practices Act, the U.K. Bribery Act, and other foreign laws prohibiting corrupt payments to governmental officials, and anti-competition regulations. Violations of these laws and regulations could result in fines and penalties, criminal sanctions, restrictions on our business conduct and on our ability to offer our products in one or more countries, and could also materially affect our brand, our ability to attract and retain employees, our international operations, our business and our operating results. Although we have implemented policies and procedures designed to ensure compliance with these laws and regulations, there can be no assurance that our employees, contractors, or agents in foreign countries will not violate our policies.

We depend on limited sources for our products.

We depend on our wholly-owned subsidiaries, Hurco Manufacturing Limited, Ningbo Hurco Manufacturing Limited, Milltronics USA, Inc., and LCM Precision Technology S.r.l., to produce our machine tools and electro-mechanical components and accessories in Taiwan, China, the U.S. and Italy, respectively. We also depend on our 35% owned affiliate, HAL, and other key third party suppliers to produce our computer control systems and key components, such as motors and drives for our machine tools. An unplanned interruption in manufacturing would have a material adverse effect on our results of operations and financial condition. Such an interruption could result from a change in the political environment or a natural disaster, such as an earthquake, typhoon, or tsunami. Also, any interruption in service by one of our key component suppliers, if prolonged, could have a material adverse effect on our results of operations and financial condition.

Fluctuations in the exchange rates between the U.S. Dollar and any of several foreign currencies can increase our costs and decrease our revenues.

Our sales to customers located outside of the U.S., which generated approximately 69% of our revenues in fiscal 2016, are invoiced and received in several foreign currencies, primarily the Euro, Pound Sterling and Chinese Yuan. Therefore, our results of operations and financial condition are affected by fluctuations in exchange rates between these currencies and the U.S. Dollar, both for purposes of actual conversion and for financial reporting purposes. In addition, we are exposed to exchange risk associated with our purchases of materials and components for our Taiwan manufacturing operations, which are primarily made in the New Taiwan Dollar and the Euro. We hedge our foreign currency exposure with the purchase of forward exchange contracts. These hedge contracts only mitigate the impact of changes in foreign currency rates that occur during the term of the related contract period and carry risks of counter-party failure. There can be no assurance that our hedges will have their intended effects.

Our competitive position and prospects for growth may be diminished if we are unable to develop and introduce new and enhanced products on a timely basis that are accepted in the market.

The machine tool industry is subject to technological change, evolving industry standards, changing customer requirements, and improvements in and expansion of product offerings. Our ability to anticipate changes in technology, industry standards, customers’ requirements and competitors’ product offerings and to develop and introduce new and enhanced products on a timely basis that are accepted in the market, are significant factors in maintaining and improving our competitive position and growth prospects. If the technologies or standards used in our products become obsolete or fail to gain widespread commercial acceptance, our business would be materially adversely affected. Although we believe that we have the technological capabilities to remain competitive, developments by others may render our products or technologies obsolete or noncompetitive.

We compete with larger companies that have greater financial resources, and our business could be harmed by competitors’ actions.

The markets in which our products are sold are extremely competitive and highly fragmented. In marketing our products, we compete with other manufacturers in terms of quality, reliability, price, value, delivery time, service and technological characteristics. We compete with a number of U.S., European and Asian competitors, most of which are larger, have substantially greater financial resources and have been supported by governmental or financial institution subsidies and, therefore, may have competitive advantages over us. While we believe our product lines compete effectively, our financial resources are limited compared to those of most of our competitors, making it challenging to remain competitive.

Fluctuations in the price of raw materials, especially steel and iron, could adversely affect our sales, costs and profitability.

We manufacture products with a high iron and steel content. The availability and price for these and other raw materials are subject to volatility due to worldwide supply and demand forces, speculative actions, inventory levels, exchange rates, production costs and anticipated or perceived shortages. In some cases, those cost increases can be passed on to customers in the form of price increases; in other cases they cannot. If the prices of raw materials increase and we are not able to charge our customers higher prices to compensate, our results of operations would be adversely affected.

Regulations related to “conflict minerals” may cause us to incur additional expenses and could limit the supply and increase the cost of certain metals used in manufacturing our products.

The SEC requires disclosure by public companies of specified minerals, known as conflict minerals, that are necessary to the functionality or production of products manufactured or contracted to be manufactured. The rule requires a disclosure report to be filed annually with the SEC, and requires companies to perform due diligence, disclose and report whether or not such minerals originate from the Democratic Republic of Congo or an adjoining country. The rule could affect sourcing at competitive prices and availability in sufficient quantities of certain minerals used in the manufacture of components that are incorporated into our products, including tin, tantalum, gold and tungsten. The number of suppliers that provide conflict-free minerals may be limited. In addition, there may be material costs associated with complying with the disclosure requirements, such as costs related to the due diligence process of determining the source of certain minerals used in our products, as well as costs of possible changes to products, processes, or sources of supply as a consequence of such verification activities. We may not be able to sufficiently verify the origins of the relevant minerals used in components manufactured by third parties through our due diligence procedures, which may harm our reputation. We may also encounter challenges to satisfy those customers that require that all of the components of our products be certified as conflict-free, which could place us at a competitive disadvantage if we are unable to do so.

Due to future changes in technology, changes in market demand, or changes in market expectations, portions of our inventory may become obsolete or excessive.

The technology within our products evolves, and we periodically bring new versions of our machines to market. The phasing out of an old product involves estimating the amount of inventory required to satisfy the final demand for those machines and to satisfy future repair part needs. Based on changing customer demand and expectations of delivery times for repair parts, we may find that we have either obsolete or excess inventory on hand. Because of unforeseen future changes in technology, market demand or competition, we might have to write off unusable inventory, which would adversely affect our results of operations.

Acquisitions could disrupt our operations and harm our operating results.

In July 2015, we acquired a CNC machine tool business in Minnesota, U.S. (Milltronics) and a CNC machine tool business in Taiwan (Takumi). We may seek additional opportunities to expand our product offerings or the markets we serve by acquiring other companies, product lines, technologies and personnel. Acquisitions involve numerous risks, including the following:

Acquisitions may also cause us to:

Mergers and acquisitions are inherently risky. No assurance can be given that our acquisitions will be successful. Further, no assurance can be given that an acquisition will not adversely affect our business, operating results, or financial condition. Failure to manage and successfully integrate an acquisition could harm our business and operating results in a material way. Even when an acquired company has already developed and marketed products, there can be no assurance that enhancements to those products will be made in a timely manner or that pre-acquisition due diligence will identify all possible issues that might arise with respect to such products.

Risks related to new product development also apply to acquisitions. For additional information, please see the risk factor above entitled, “Due to future changes in technology, changes in market demand, or changes in market expectations, portions of our inventory may become obsolete or excessive.”

Assets may become impaired, requiring us to record a significant charge to earnings.

We review our assets, including intangible assets such as goodwill, for indications of impairment when events or changes in circumstances indicate the carrying value may not be recoverable. We could be required to record a significant charge to earnings in our financial statements for the period in which any impairment of these assets is determined, which would adversely affect our results of operations for that period.

We may experience negative or unforeseen tax consequences.

We may experience negative or unforeseen tax consequences.  We review the probability of the realization of our net deferred tax assets each period based on forecasts of taxable income in both the U.S. and foreign jurisdictions.  This review uses historical results, projected future operating results based upon approved business plans, eligible carryforward periods, tax-planning opportunities and other relevant considerations.  Adverse changes in the profitability and financial outlook in the U.S. or foreign jurisdictions may require the creation of a valuation allowance to reduce our net deferred tax assets.  Such changes could result in material non-cash expenses in the period in which the changes are made and could have a material adverse impact on our results of operations and financial condition. We also earn a significant amount of our operating income from outside the U.S., and any repatriation of funds representing earnings of foreign subsidiaries may significantly impact our effective tax rates.  In addition, there have been proposals to change U.S. tax laws that would significantly impact how U.S. multinational corporations are taxed on domestic and foreign earnings. Although we cannot predict whether or in what form this proposed legislation will pass, if enacted it could have a material benefit or adverse impact on our tax expense and cash flow.

Our continued success depends on our ability to protect our intellectual property.

Our future success depends in part upon our ability to protect our intellectual property. We rely principally on nondisclosure agreements, other contractual arrangements, trade secret law, trademark registration and patents to protect our intellectual property. However, these measures may be inadequate to protect our intellectual property from infringement by others or prevent misappropriation of our proprietary rights. In addition, the laws of some foreign countries do not protect proprietary rights to the same extent as do U.S. laws. Our inability to protect our proprietary information and enforce our intellectual property rights through infringement proceedings could have a material adverse effect on our business, financial condition and results of operations.

The unanticipated loss of current members of our senior management team and other key personnel may adversely affect our operating results.

The unexpected loss of members of our senior management team or other key personnel could impair our ability to carry out our business plan. We believe that our future success will depend in part on our ability to attract and retain highly skilled and qualified personnel. The loss of senior management or other key personnel may adversely affect our operating results as we incur costs to replace the departed personnel and potentially lose opportunities in the transition of important job functions.

If our network and system security measures are breached and unauthorized access is obtained to our data, to our customers’ or vendors’ data, or to our critical information technology systems, we may incur legal and financial exposure and liabilities.

As part of our business, we store our data and certain data about our customers and vendors in our information technology systems. If a third party gained unauthorized access to our data, including any data regarding our customers or vendors, the security breach could expose us to risks, including loss of business, litigation and possible liability. Our security measures may be breached as a result of third-party action, including intentional misconduct by computer hackers, employee error, malfeasance or otherwise. Additionally, third parties may attempt to fraudulently induce employees or customers into disclosing sensitive information such as user names, passwords or other information to gain access to our customers' data or our data, including our intellectual property and other confidential business information, or our information technology systems. Although we work closely with industry recognized manufacturers supporting the security measures we have employed in an effort to keep our technology current with the ongoing threats, the techniques used to obtain unauthorized access, or to sabotage systems, change frequently, and therefore we may be unable to anticipate these techniques or to implement adequate preventative measures. Any security breach could result in: the unauthorized publication of our confidential business or proprietary information; the unauthorized release of customer or vendor data and payment information; a loss of confidence by our customers; damage to our reputation; a disruption to our business; litigation and legal liability; and a negative impact on our future sales.  In addition, the cost and operational consequences of implementing further data protection measures could be significant.

None.

The following table sets forth the principal use, location, and size of each of our facilities:

We own the Indianapolis facility and lease all other facilities. The leases have terms expiring at various dates ranging from January 2017 to March 2024. We believe that all of our facilities are well maintained and are adequate for our needs now and in the foreseeable future. We do not believe that we would experience any difficulty in replacing any of the present facilities if any of our leases were not renewed at expiration.

We are involved in various claims and lawsuits arising in the normal course of business.  Pursuant to applicable accounting rules, we accrue the minimum liability for each known claim when the estimated outcome is a range of possible loss and no one amount within that range is more likely than another.  We maintain insurance policies for such matters, and we record insurance recoveries when we determine such recovery to be probable.  We do not expect any of these claims, individually or in the aggregate, to have a material adverse effect on our consolidated financial position or results of operations.  We believe that the ultimate resolution of claims for any losses will not exceed our insurance policy coverages.

None.

Executive Officers of the Registrant

Executive officers are elected each year by the Board of Directors following the Annual Meeting of Shareholders to serve during the ensuing year and until their respective successors are elected and qualified. There are no family relationships between any of our executive officers or between any of them and any of the members of the Board of Directors.

The following information sets forth as of October 31, 2016, the name of each executive officer and his or her age, tenure as an officer, principal occupation and business experience:

Michael Doar was elected Chairman of the Board and Chief Executive Officer on November 14, 2001. Mr. Doar had held various management positions with Ingersoll Milling Machine Company from 1989 until 2001. Mr. Doar has been a director of Hurco since 2000.

Gregory S. Volovic has been employed by us since March 2005 and was elected as our President in March 2013. Mr. Volovic previously held the position of Executive Vice President, Software and Engineering until October 2009. Prior to joining us, Mr. Volovic held various positions with Thomson, Inc. including Director of E-Business, Engineering, and Information Technology. Prior to that, Mr. Volovic was employed by Unisys Corporation.

Sonja K. McClelland has been employed by us since September 1996 and was elected as Vice President, Secretary, Treasurer and Chief Financial Officer in March 2014. Ms. McClelland served as Corporate Accounting Manager from September 1996 to 1999, as Division Controller for Hurco USA from September 1999 to November 2004, and as our Corporate Controller and Assistant Secretary from November 2004 to March 2014. Prior to joining us, Ms. McClelland was employed for three years by an international public accounting firm.

John P. Donlon has been employed by us since April 2010 as Executive Vice President, International Sales/Service.  Prior to joining us, Mr. Donlon served as the Vice President of Sales for Yaskawa America Robotics since 2008. From 2004 to 2008, Mr. Donlon served as the Vice President of Sales and Marketing for Ansaldo STS, a worldwide supplier of automation technologies to the rail industry. Earlier in his career, Mr. Donlon held executive sales and management positions with other multi-national companies including Honeywell and ABB, and he has significant international experience in the emerging markets of China, Russia and Brazil.

PART II

Market Information

Our common stock is traded on the Nasdaq Global Select Market under the symbol “HURC”. The following table sets forth, for the periods indicated, the high and low sale prices as reported by the Nasdaq Global Select Market and declared dividends per share of our common stock.

On December 12, 2016, the closing price of our common stock on the Nasdaq Global Select Market was $33.85.

Holders

There were 113 holders of record of our common stock as of December 12, 2016.

Dividend Policy

We began declaring cash dividends on our common stock in the third quarter of fiscal 2013, and we expect to continue to declare dividends on a quarterly basis; however, the declaration and amount of any future cash dividends will be subject to the sole discretion of our Board of Directors and will depend upon many factors, including our results of operations, financial condition, capital requirements, regulatory and contractual restrictions, our business strategy and other factors deemed relevant by our Board of Directors.

Our payment of dividends is limited by our U.S. credit agreement, as further described in Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations and in Note 5 of Notes to Consolidated Financial Statements.

Other Information

During the period covered by this report, we did not sell any equity securities that were not registered under the Securities Act of 1933, as amended.

The disclosure under the caption “Equity Compensation Plan Information” is incorporated by reference in Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

The performance graph information is included in Item 9B. Other Information.

The Selected Financial Data presented below has been derived from our consolidated financial statements for the years indicated and should be read in conjunction with the consolidated financial statements and related notes set forth elsewhere herein and Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

^* Certain prior year amounts have been changed to conform to current year’s presentation as a result of the adoption of Accounting Standards Update (“ASU”) No. 2015-17.

EXECUTIVE OVERVIEW

Hurco Companies, Inc. is an international, industrial technology company operating in a single segment. We design, manufacture and sell computerized (i.e., Computer Numeric Control, or CNC) machine tools, consisting primarily of vertical machining centers (mills) and turning centers (lathes), to companies in the metal cutting industry through a worldwide sales, service and distribution network.  Although the majority of our computer control systems and software products are proprietary, they predominantly use industry standard personal computer components.  Our computer control systems and software products are primarily sold as integral components of our computerized machine tool products.  We also provide machine tool components, software options, control upgrades, accessories and replacement parts for our products, as well as customer service and training support.

The following overview is intended to provide a brief explanation of the principal factors that have contributed to our recent financial performance. This overview is intended to be read in conjunction with the more detailed information included in our financial statements that appear elsewhere in this report.

The market for machine tools is international in scope. We have both significant foreign sales and significant foreign manufacturing operations. During fiscal 2016, approximately 54% of our revenues were attributable to customers in Europe, where we typically sell more of our higher-performance, higher-priced VMX series machines. Additionally, approximately 11% of our revenues were attributable to customers in Asia, where we sell more of our entry-level, lower-priced machines, but where we also encounter greater price pressures.

During the third quarter of fiscal 2015, we acquired the assets of the machine tool business of Milltronics Manufacturing Company, Inc. and we are operating this U.S. business as a product line through our wholly-owned subsidiary, Milltronics USA, Inc. (“Milltronics”). Milltronics manufactures and sells CNC knee mills, tool room bed mills, vertical machining centers, combination lathes, slant-bed lathes, horizontal machining centers, and bed mills. During the third quarter of fiscal 2015, we also acquired the assets of the machine tool business of Takumi Machinery Co., Ltd. (“Takumi”), a Taiwanese company that designs and manufactures CNC vertical machining centers, double column machining centers, high speed bridge machines and other machine tools, with sales primarily in Taiwan, China and Europe. Takumi machines are equipped with industrial controls from Fanuc^®, Siemens^®, Mitsubishi^® or Heidenhain^® which can be used in high-volume parts manufacturing. We are operating this Taiwanese business as a product line through our wholly-owned subsidiary Hurco Manufacturing Limited (“HML”). The Milltronics and Takumi product lines contribute to our efforts to expand our consolidated product range, customer base and global platform, and we believe may accelerate emerging market penetration, particularly in strategic markets such as China and South America. The Hurco, Milltronics and Takumi product lines represent a comprehensive product portfolio with more than 150 different models. The combined machine tool product lines also provide benefits related to the development of product enhancements, technologies and models due to leverage of shared resources and cross-utilization of proven engineering designs that allow us to achieve manufacturing cost reductions from economies of scale and manufacturing efficiencies.

We sell our products through more than 195 independent agents and distributors throughout North and South America (the Americas), Europe and Asia.  Although some distributors carry competitive products, we are the primary line for the majority of our distributors globally.   We also have our own direct sales and service organizations in China, France, Germany, India, Italy, Poland, Singapore, South Africa, Taiwan, the United Kingdom and certain parts of the United States, which are among the world's principal machine tool consuming markets. The vast majority of our machine tools are manufactured to our specifications primarily by our wholly-owned subsidiary in Taiwan, HML. Machine castings and components to support HML’s production are manufactured at our facility in Ningbo, China. Components to support our SRT line of five-axis machining centers, such as the direct drive spindle, swivel head and rotary table, are manufactured by our wholly-owned subsidiary in Italy, LCM Precision Technology S.r.l. (“LCM”).

Our sales to foreign customers are denominated, and payments by those customers are made, in the prevailing currencies - primarily the Euro, Pound Sterling and Chinese Yuan - in the countries in which those customers are located. Our product costs are incurred and paid primarily in the New Taiwan Dollar and the Euro. Changes in currency exchange rates may have a material effect on our operating results and consolidated balance sheets as reported under U.S. Generally Accepted Accounting Principles. For example, when the U.S. Dollar weakens in value relative to a foreign currency, sales made, and expenses incurred, in that currency when translated to U.S. Dollars for reporting in our financial statements, are higher than would be the case when the U.S. Dollar is stronger. In the comparison of our period-to-period results, we discuss the effect of currency translation on those results, which reflect translation to U.S. Dollars at exchange rates prevailing during the period covered by those financial statements.

Our high levels of foreign manufacturing and sales also subject us to cash flow risks due to fluctuating currency exchange rates. We seek to mitigate those risks through the use of various derivative instruments – principally foreign currency forward exchange contracts.

Results of Operations

The following table presents, for the fiscal years indicated, selected items from the Consolidated Statements of Income expressed as a percentage of our worldwide sales and service fees and the year-to-year percentage changes in the dollar amounts of those items.

Fiscal 2016 Compared to Fiscal 2015

Sales and Service Fees. Sales and service fees for fiscal 2016 were $227.3 million, an increase of $7.9 million, or 4%, compared to fiscal 2015 and included a negative currency impact of $6.4 million, or 3%, when translating foreign sales to U.S. dollars for financial reporting purposes.

Net Sales and Service Fees by Geographic Region

The following table sets forth net sales and service fees by geographic region for the fiscal year ended October 31, 2016 and 2015 (in thousands):

Sales in the Americas for fiscal 2016 increased by 6% compared to fiscal 2015, as a result of year-end promotional activities following the International Manufacturing Technology Show (“IMTS”) in September 2016, as well as the impact of twelve months of Milltronics sales in fiscal 2016 compared to only three months of sales activity from the acquisition of the Milltronics product line in July 2015 until the end of fiscal 2015. Sales in the Americas for fiscal 2016 included $17.9 million of sales from the Milltronics product line, compared to $6.7 million in fiscal 2015. European sales for fiscal 2016 decreased by 4% compared to fiscal 2015 and included a negative currency impact of 5% when translating foreign sales to U.S. dollars for financial reporting purposes. The slight year-over-year growth in European sales for fiscal 2016, excluding the effect of the negative currency impact, was driven by increased shipments of higher-performance machines in Germany, France and Italy. Asian Pacific sales for fiscal 2016 increased by 45% compared to fiscal 2015 and included a negative currency impact of 3% when translating foreign sales to U.S. dollars for financial reporting purposes. The year-over-year increase in Asian Pacific sales for fiscal 2016 was primarily attributable to twelve months of Takumi sales included in fiscal 2016 compared to only three months of sales activity from the acquisition of the Takumi product line in July 2015 until the end of fiscal 2015. Asian Pacific sales for fiscal 2016 included $14.6 million of sales from the Takumi product line, compared to $3.3 million for fiscal 2015.

Net Sales and Service Fees by Product Category

The following table sets forth net sales and service fees by product group and services for the fiscal years ended October 31, 2016 and 2015 (in thousands):

machine systems.

Sales of computerized machine tools and service parts increased during fiscal 2016 by 3% and 13%, respectively, compared to fiscal 2015 primarily due to the impact of twelve months of Milltronics and Takumi sales in fiscal 2016 compared to only three months of sales activity from the acquisitions of the Milltronics and Takumi product lines in July 2015 until the end of fiscal 2015, as well as year-end promotional activities following the International Manufacturing Technology Show (“IMTS”) in September 2016. Sales of computer control systems and software decreased by 33% during fiscal 2016 compared to fiscal 2015 as a result of a reduction in sales for the Autobend^® product line in the Americas and the United Kingdom. Service fees revenue increased during fiscal 2016 by 7% compared to fiscal 2015 primarily due to increased repair needs from customers in the Americas, the United Kingdom and France.

Orders and Backlog. Orders for fiscal 2016 were $219.2 million, a decrease of $4.0 million, or 2%, compared to fiscal 2015 and included a negative currency impact of $6.5 million, or 3%, when translating foreign orders to U.S. dollars for financial reporting purposes. Orders in the Americas for fiscal 2016 were $70.9 million, a decrease of $1.1 million, or 1%, compared to fiscal 2015, reflecting an overall softer market and the impact of pricing pressures in this region, partially offset by the impact of twelve months of Milltronics sales in fiscal 2016 compared to only three months in fiscal 2015. Orders in the Americas for fiscal 2016 included $15.7 million of orders from the Milltronics product line, compared to $10.1 million in fiscal 2015, of which approximately $3.9 million of orders were existing backlog orders acquired with the Milltronics product line in July 2015. European orders for fiscal 2016 were $121.5 million, a decrease of $5.0 million, or 4%, compared to fiscal 2015, primarily due to the negative impact of currency when translating foreign orders to U.S. dollars for financial reporting purposes. Asian Pacific orders for fiscal 2016 were $26.8 million, an increase of $2.1 million, or 9%, compared to fiscal 2015 and included a negative currency impact of $1.1 million, or 5%, when translating foreign orders to U.S. dollars for financial reporting purposes. The year-over-year increase in Asian Pacific orders were due primarily to increased customer demand for the Takumi product line in China. Asian Pacific orders for fiscal 2016 included $12.7 million of orders from the Takumi product line, compared to $10.6 million in fiscal 2015, of which approximately $8.6 million of orders were existing backlog orders acquired with the Takumi product line in July 2015.

Backlog was $32.3 million at October 31, 2016 compared to $41.2 million at October 31, 2015. We do not believe backlog is a useful measure of past performance or indicative of future performance. Backlog orders as of October 31, 2016 are expected to be fulfilled in fiscal 2017.

Gross Profit. Gross profit for fiscal 2016 was $70.4 million, or 31% of sales, which was consistent with gross profit for fiscal 2015 of $69.1 million, or 31% of sales.

Operating Expenses. Selling, general and administrative expenses for fiscal 2016 were $50.8 million, or 22% of sales, compared to $45.3 million, or 21% of sales, for fiscal 2015. The year-over-year increase in operating expenses for fiscal 2016 was primarily due to increased trade show expenses, increased employee support costs for global sales operations, and incremental annualized operating expenses associated with the acquisitions of the Milltronics and Takumi product lines since July 2015.

Operating Income. Operating income for fiscal 2016 was $19.6 million, or 9% of sales, compared to $23.8 million, or 11% of sales, in fiscal 2015. The year-over-year reduction in operating income was primarily attributable to increased operating expenses associated with increased trade show expenses, increased employee support costs for global sales operations, and incremental operating expenses associated with the acquisitions of the Milltronics and Takumi product lines since July 2015.

Other Expense, Net. Other expense, net for fiscal 2016 increased by $0.5 million from fiscal 2015 due mainly to higher foreign currency losses experienced in 2016 and the elimination of a one-time out-of-period income adjustment recorded in fiscal 2015.

Provision for Income Taxes. Our effective tax rate for fiscal 2016 was 30% in comparison to 31% for fiscal 2015. The decrease in the effective income tax rate for fiscal 2016 was due primarily to changes in the geographic mix of income or loss among tax jurisdictions.

Net Income. Net income for fiscal 2016 was $13.3 million, or $1.99 per diluted share, a decrease of $2.9 million, or 18%, from fiscal 2015 net income of $16.2 million, or $2.44 per diluted share.

Fiscal 2015 Compared to Fiscal 2014

Sales and Service Fees. Sales and service fees for fiscal 2015 were $219.4 million, a decrease of $2.9 million, or 1%, compared to fiscal 2014 and included a negative currency impact of $21.2 million, or 10%, compared to fiscal 2014. Sales for fiscal 2015 included $10.0 million of sales activities from the acquisitions of the Takumi and Milltronics product lines in July 2015 until the end of fiscal 2015.

Net Sales and Service Fees by Geographic Region

The following table sets forth net sales and service fees by geographic region for the fiscal years ended October 31, 2015 and 2014 (in thousands):

Sales in the Americas increased during fiscal 2015 by 13% compared to fiscal 2014 primarily due to three months of sales activity from the acquisition of the Milltronics product line in July 2015 until the end of fiscal 2015. Sales for the Milltronics product line in the Americas for fiscal 2015 were $6.7 million. European sales for fiscal 2015 decreased by 6% compared to fiscal 2014 and included a negative currency impact of 14%. Excluding the negative currency impact, the year-over-year growth in European sales was driven by increased shipments of higher-performance machines in Germany, France and Italy. Asian Pacific sales for fiscal 2015 decreased by 9% compared to fiscal 2014, primarily due to softer markets in China and India and the negative impact of currency. Asian Pacific sales for fiscal 2015 included $3.3 million of sales activity from the acquisition of the Takumi product line in July 2015 until the end of fiscal 2015.

Net Sales and Service Fees by Product Category

The following table sets forth net sales and service fees by product group and services for the fiscal years ended October 31, 2015 and 2014 (in thousands):

Sales of computerized machine tools decreased during fiscal 2015 by 2% compared to fiscal 2014 and included a negative currency impact of 9% when translating foreign sales to U.S. dollars for financial reporting purposes. Excluding the negative currency impact, the year-over-year increase in computerized machine tools was due to increased shipments of higher-performance machines in Germany and France, as well as the impact of three months of sales activity from the acquisitions of the Milltronics and Takumi product lines in July 2015 until the end of fiscal 2015. Sales of computer control systems and software decreased by 9% during fiscal 2015 compared to fiscal 2014 due primarily to decreased shipments of Autobend^® press brake machines and optional software products in the Americas. Sales of service parts increased by 11% during fiscal 2015 compared to fiscal 2014 due mainly to three months of sales activity from the acquisitions of the Milltronics and Takumi product lines in July 2015 until the end of fiscal 2015. Service fees revenue for fiscal 2015 decreased by 5% compared to fiscal 2014 primarily due to the negative impact of currency when translating foreign sales to U.S. dollars for financial reporting purposes.

Orders and Backlog. Orders for fiscal 2015 were $223.2 million, a decrease of $9.3 million, or 4%, compared to fiscal 2014 and included a negative currency impact of $21.2 million, or 9%, when translating foreign orders into U.S. dollars for financial reporting purposes. Orders in the Americas for fiscal 2015 were $72.0 million, an increase of $8.6 million, or 14%, compared to fiscal 2014. Orders in the Americas for fiscal 2015 included $10.1 million of orders related to the Milltronics product line. Excluding the orders related to the Milltronics product line, orders for the Americas decreased during fiscal 2015 compared to fiscal 2014 since promotional activities related to the International Manufacturing Technology Show held in September 2014 led to an increase in orders in fiscal 2014. European orders for fiscal 2015 were $126.5 million, a decrease of $22.0 million, or 15%, compared to fiscal 2014 and included a negative currency impact of $20.4 million, or 14%. Excluding the negative impact of currency, the slight year-over-year reduction in European orders was primarily driven by foreign currency weakness in the United Kingdom and fluctuating customer demand for electro-mechanical components and accessories manufactured by LCM. Asian Pacific orders for fiscal 2015 were $24.7 million, an increase of $4.1 million, or 20%, compared to fiscal 2014. Asian Pacific orders for fiscal 2015 included $10.6 million of orders related to the Takumi product line. Excluding the orders related to the Takumi product line, Asian Pacific orders for fiscal 2015 decreased primarily due to softer market conditions in China and India.

Backlog was $41.2 million at October 31, 2015 (which included $10.6 million of backlog for Milltronics and Takumi products) compared to $39.8 million at October 31, 2014. We do not believe backlog is a useful measure of past performance or indicative of future performance.

Gross Profit. Gross profit for fiscal 2015 was $69.1 million, or 31% of sales, compared to $68.6 million, or 31% of sales, for fiscal 2014. The year-over-year improvement in gross profit was primarily attributable to increased sales of higher-performance machines across all regions, net of the pricing pressure and the negative impact of currency.

Operating Expenses. Selling, general and administrative expenses for fiscal 2015 were $45.3 million, or 21% of sales, compared to $46.6 million, or 21% of sales, for fiscal 2014. Fiscal year 2015 expenses included approximately $2.4 million related to Milltronics and Takumi, of which $0.7 million represented one-time acquisition costs. Selling, general and administrative expenses for fiscal 2015 included a positive impact of approximately $3.2 million, or 1% of sales, when translating foreign expenses to U.S. dollars for financial reporting purposes.

Operating Income. Operating income for fiscal 2015 was $23.8 million, or 11% of sales, compared to $22.0 million, or 10% of sales, in fiscal 2014. The year-over-year improvement in operating income was primarily attributable to increased sales of higher-performance machines across all regions.

Other Expense, Net. Other expense, net for fiscal 2015 decreased by $0.4 million from fiscal 2014 as a result of a one-time out-of-period income adjustment recorded in fiscal 2015.

Provision for Income Taxes. Our effective tax rate for fiscal 2015 was 31% in comparison to 29% for fiscal 2014. The increase in the effective income tax rate in fiscal 2015 was due primarily to changes in the geographic mix of income or loss among tax jurisdictions.

Net Income. Net income for fiscal 2015 was $16.2 million, or $2.44 per diluted share, an increase of $1.1 million, or 7%, from fiscal 2014 net income of $15.1 million, or $2.30 per diluted share.

Liquidity and Capital Resources

At October 31, 2016, we had cash and cash equivalents of $41.2 million compared to $55.2 million at October 31, 2015. Approximately 54% of our $41.2 million of cash and cash equivalents is held in the U.S. The balance is attributable to our foreign operations and is held in the local currencies of our various foreign entities, subject to fluctuations in currency exchange rates. We do not believe that the indefinite reinvestment of these funds offshore impairs our ability to meet our domestic working capital needs.

Working capital (including cash and cash equivalents) was $160.4 million at October 31, 2016 compared to $151.0 million at October 31, 2015. The increase in working capital was primarily due to increased inventories, which were $117.0 million at October 31, 2016, compared to $106.3 million at October 31, 2015. The increase in inventories was primarily due to a reduction in orders during fiscal 2016, as well as incremental computerized machine tools for the Milltronics and Takumi product lines, which contributed to our efforts in expanding our consolidated product range to meet customers’ needs. Inventory turns at October 31, 2016 were 1.4 compared to 1.6 turns at October 31, 2015.

Capital expenditures were $4.2 million in fiscal 2016 compared to $4.5 million in fiscal 2015. Capital expenditures for fiscal 2016 were primarily for software development costs, purchases of factory equipment for production facilities, and purchases of general software and equipment for selling facilities. We funded these expenditures with cash flows from operations.

On December 6, 2016, we amended our U.S. credit agreement, among other things, to increase the unsecured revolving credit facility from $12.5 million to $15.0 million, to increase the cash dividend allowance from $4.0 million per calendar year to $5.0 million per calendar year, and to extend the scheduled maturity date to December 31, 2018. We also amended the U.S. credit agreement to increase the minimum working capital and minimum tangible net worth requirements from $90.0 million to $105.0 million and $120.0 million to $125.0 million, respectively.

Borrowings under the U.S. credit agreement bear interest either at a LIBOR-based rate or a floating rate, in each case with an interest rate floor of 0.00%.  The floating rate equals the greatest of (a) a one month LIBOR-based rate plus 1.00% per annum, (b) the federal funds effective rate plus 0.50% per annum, (c) the prevailing prime rate, and (d) 0.00%.  The rate paid for the unutilized portion of the U.S. credit agreement is 0.05% per annum. 

The U.S. credit agreement contains customary financial covenants, including covenants (1) restricting us from making certain investments, loans, advances and acquisitions (but permitting us to make investments in subsidiaries of up to $5.0 million), (2) requiring that we maintain a minimum working capital of $105.0 million, and (3) requiring that we maintain a minimum tangible net worth of $125.0 million. The U.S. credit agreement permits us to pay cash dividends in an amount not to exceed $5.0 million per calendar year, so long as we are not in default before and after giving effect to such dividends.  

We have a £1.0 million revolving credit facility in England and a €1.5 million revolving credit facility in Germany. We also have a 40.0 million Chinese Yuan (approximately $5.9 million) credit facility in China that was renewed on February 17, 2016 with an expiration date of February 16, 2017.

At October 31, 2016, we had $1.5 million of borrowings under our China credit facility. We had no other debt or borrowings under any of our other credit facilities. At October 31, 2016, we were in compliance with the covenants contained in all of our credit facilities and had $19.8 million of available borrowing capacity under those facilities.

We believe our cash position and borrowing capacity under our credit facilities provides adequate liquidity to fund our operations over the next twelve months, pay quarterly cash dividends and execute our strategic plan for product innovation and targeted penetration of developing markets.

We continue to receive and review information concerning businesses and assets , including intellectual property assets, available for potential acquisition.

Contractual Obligations and Commitments

The following is a table of contractual obligations and commitments as of October 31, 2016 (in thousands):

In addition to the contractual obligations and commitments disclosed above, we also have a variety of other obligations for the procurement of materials and services, none of which subject us to any material non-cancelable commitments. While some of these obligations arise under long-term supply agreements, we are not committed under these agreements to accept or pay for requirements that are not needed to meet our production needs. We have no material minimum purchase commitments or “take-or-pay” type agreements or arrangements. Unrecognized tax benefits in the amount of approximately $1.1 million, excluding any interest and penalties, have been excluded from the table above because we are unable to determine a reasonably reliable estimate of the timing of future payment.

We expect capital spending in fiscal 2017 to be approximately $5.9 million, which includes investments for capitalized software and capital equipment for all of our production and selling facilities. We expect to fund these commitments with cash on hand and cash generated from operations.

Off Balance Sheet Arrangements

From time to time, our subsidiaries guarantee third party payment obligations in connection with the sale of machines to customers that use financing. We follow Financial Accounting Standards Board (“FASB”) guidance for accounting for guarantees (codified in Accounting Standards Codification (“ASC”) 460). As of October 31, 2016, we had 26 outstanding third party payment guarantees totaling approximately $1.2 million. The terms of these guarantees are consistent with the underlying customer financing terms. Upon shipment of a machine, the customer has the risk of ownership. The customer does not obtain title, however, until it has paid for the machine. A retention of title clause allows us to recover the machine if the customer defaults on the financing. We accrue liabilities under these guarantees at fair value, which amounts are insignificant.

Critical Accounting Policies and Estimates

Our discussion and analysis of financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with U.S. Generally Accepted Accounting Principles. The preparation of financial statements in conformity with those accounting principles require us to make judgments and estimates that affect the amounts reported in the consolidated financial statements and accompanying notes. Those judgments and estimates have a significant effect on the financial statements because they result primarily from the need to make estimates about the effects of matters that are inherently uncertain. Actual results could differ from those estimates. Our accounting policies, including those described below, are frequently evaluated as our judgment and estimates are based upon historical experience and on various other assumptions that are believed to be reasonable under the circumstances.

Revenue Recognition - We recognize revenue from sales of our machine tool systems upon delivery of the product to the customer, which is normally at the time of shipment, because persuasive evidence of an arrangement exists, delivery has occurred, the selling price is fixed and determinable and collectability is reasonably assured. Our computerized machine tools are general-purpose computer controlled machine tools that are typically used in stand-alone operations. Transfer of ownership and risk of loss are not contingent upon contractual customer acceptance. Prior to shipment, we test each machine to ensure the machine’s compliance with standard operating specifications.

Depending upon geographic location, after shipment, a machine may be installed at the customer’s facilities by a distributor, independent contractor or by one of our service technicians. In most instances where a machine is sold through a distributor, we have no installation involvement. If sales are direct or through sales agents, we will typically complete the machine installation, which consists of the reassembly of certain parts that were removed for shipping and the re-testing of the machine to ensure that it is performing within the standard specifications. We consider the machine installation process to be inconsequential and perfunctory.

Service fees from maintenance contracts are deferred and recognized in earnings on a pro rata basis over the term of the contract. Sales related to software products are recognized when shipped in conformity with U.S. Generally Accepted Accounting Principles as promulgated by FASB related to software revenue recognition that requires at the time of shipment, persuasive evidence of an arrangement exists, delivery has occurred, the selling price is fixed and determinable and collectability is reasonably assured. The software does not require production, modification or customization.

Inventories – We determine at each balance sheet date how much, if any, of our inventory may ultimately prove to be either unsalable or unsalable at its carrying cost. Reserves are established to effectively adjust the carrying value of such inventory to net realizable value. To determine the appropriate level of valuation reserves, we evaluate current stock levels in relation to historical and expected patterns of demand for all of our products. We evaluate the need for changes to valuation reserves based on market conditions, competitive offerings and other factors on a regular basis.

Income Taxes – We account for income taxes and the related accounts under the asset and liability method.  Deferred tax assets and liabilities are measured using enacted income tax rates in each jurisdiction in effect for the year in which the temporary differences are expected to be recovered or settled. These deferred tax assets are reduced by a valuation allowance, which is established when it is more likely than not that some portion or all of the deferred tax assets will not be realized. Our judgment regarding the realization of deferred tax assets may change due to future profitability and market conditions, changes in U.S. or foreign tax laws and other factors. These changes, if any, may require material adjustments to these deferred tax assets and an accompanying reduction or increase in net income in the period when such determinations are made.

The determination of our provision for income taxes requires judgment, the use of estimates and the interpretation and application of complex tax laws. Our provision for income taxes reflects a combination of income earned and taxed at the federal and state level in the U.S., as well as in various foreign jurisdictions. We have not provided for any U.S. income taxes on the undistributed earnings of our foreign subsidiaries based upon our determination that such earnings will be indefinitely reinvested abroad.  Undistributed earnings of our wholly-owned foreign subsidiaries at October 31, 2016 were approximately $79.7 million. In the event these earnings are later distributed to the U.S., such distributions would likely result in additional U.S. tax that may be offset, at least in part, by associated foreign tax credits.

In addition to the risks to the effective tax rate described above, the future effective tax rate reflected in forward-looking statements is based on currently effective tax laws. Significant changes in those laws could materially affect these estimates.

We recognize uncertain tax positions when it is more likely than not that the tax position will be sustained upon examination by relevant taxing authorities, based on the technical merits of the position. The amount recognized is measured as the largest amount of benefit that is greater than 50 percent likely of being realized upon ultimate settlement.

Impairment of Long-Lived Assets – We are required periodically to review the recoverability of certain assets, including property, plant and equipment, intangible assets and goodwill, based on projections of anticipated future cash flows, including future profitability assessments of various product lines. We estimate cash flows using internal budgets based on recent sales data.

Capitalized Software Development Costs – Costs incurred to develop computer software products and significant enhancements to software features of existing products are capitalized as required by FASB guidance relating to accounting for the costs of computer software to be sold, leased, or otherwise marketed, and such capitalized costs are amortized over the estimated product life of the related software. The determination as to when in the product development cycle technological feasibility has been established, and the expected product life, require judgments and estimates by management and can be affected by technological developments, innovations by competitors and changes in market conditions affecting demand. We periodically review the carrying values of these assets and make judgments as to ultimate realization considering the above-mentioned risk factors.

Derivative Financial Instruments – Critical aspects of our accounting policy for derivative financial instruments that we designate as hedging instruments include conditions that require that critical terms of a hedging instrument are essentially the same as a hedged forecasted transaction. Another important element of our policy demands that formal documentation be maintained as required by FASB guidance relating to accounting for derivative instruments and hedging activities. Failure to comply with these conditions would result in a requirement to recognize changes in market value of hedge instruments in earnings. We routinely monitor significant estimates, assumptions, and judgments associated with derivative instruments, and compliance with formal documentation requirements.

Stock Compensation – We account for share-based compensation according to FASB guidance relating to share-based payments, which requires the measurement and recognition of compensation expense for all share-based awards made to employees and directors based on estimated fair values on the grant date. This guidance requires that we estimate the fair value of share-based awards on the date of grant and recognize as expense the value of the portion of the award that is ultimately expected to vest over the requisite service period.

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

Interest Rate Risk

Interest on borrowings under our bank credit agreements are tied to prevailing domestic and foreign interest rates. At October 31, 2016, we had $1.5 million of borrowings under our China credit facility. We had no other debt or borrowings under any of our other credit facilities.

Foreign Currency Exchange Risk

In fiscal 2016, we derived approximately 69% of our revenues from customers located outside of the U.S. All of our computerized machine tools and computer control systems assembled in Taiwan, as well as certain proprietary service parts, are sourced by our U.S.-based engineering and manufacturing division and re-invoiced to our foreign sales and service subsidiaries, primarily in their functional currencies.

Our products are sourced from foreign suppliers or built to our specifications by either our wholly-owned subsidiaries in Taiwan, U.S., Italy and China or an affiliated contract manufacturer in Taiwan. Our purchases are predominantly in foreign currencies and in some cases our arrangements with these suppliers include foreign currency risk sharing agreements, which reduce (but do not eliminate) the effects of currency fluctuations on product costs. The predominant portion of the exchange rate risk associated with our product purchases relates to the New Taiwan Dollar and the Euro.

We enter into foreign currency forward exchange contracts from time to time to hedge the cash flow risk related to forecasted inter-company sales and purchases denominated in, or based on, foreign currencies (primarily the Euro, Pound Sterling, and New Taiwan Dollar). We also enter into foreign currency forward exchange contracts to protect against the effects of foreign currency fluctuations on receivables and payables denominated in foreign currencies. We do not speculate in the financial markets and, therefore, do not enter into these contracts for trading purposes.

Forward contracts for the sale or purchase of foreign currencies as of October 31, 2016, which are designated as cash flow hedges under FASB guidance related to accounting for derivative instruments and hedging activities, were as follows:

*NT Dollars per U.S. Dollar

Forward contracts for the sale or purchase of foreign currencies as of October 31, 2016, which were entered into to protect against the effects of foreign currency fluctuations on receivables and payables and are not designated as hedges under this guidance denominated in foreign currencies, were as follows:

* NT Dollars per U.S. Dollar

We are exposed to foreign currency exchange risk related to our investment in net assets in foreign countries. To manage this risk, we entered into a forward contract with a notional amount of €3.0 million in November 2015. We designated this forward contract as a hedge of our net investment in Euro denominated assets. We selected the forward method under the FASB guidance related to the accounting for derivatives instruments and hedging activities. The forward method requires all changes in the fair value of the contract to be reported as a cumulative translation adjustment in Accumulated Other Comprehensive Loss, net of tax, in the same manner as the underlying hedged net assets. This forward contract matured in November 2016 and we entered into a new forward contract for the same notional amount that is set to mature in November 2017. As of October 31, 2016, we had a realized gain of $803,000 and an unrealized loss of $39,000, net of tax, recorded as cumulative translation adjustments in Accumulated other comprehensive loss, related to these forward contracts.

Forward contracts for the sale or purchase of foreign currencies as of October 31, 2016, which are designated as net investment hedges under this guidance were as follows:

Management’s Annual Report on Internal Control Over Financial Reporting

To the Shareholders and

Board of Directors

of Hurco Companies, Inc.

Management of Hurco Companies, Inc. (the “Company”) has assessed the effectiveness of the Company’s internal control over financial reporting as of October 31, 2016, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) (COSO). Management is responsible for these financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting.

Because of its inherent limitations, the Company’s internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In management’s opinion, the Company’s internal control over financial reporting as of October 31, 2016, was effective based on the criteria specified above.

Our independent registered accounting firm, Ernst & Young LLP, who also audited our consolidated financial statements, audited the effectiveness of our internal control over financial reporting as of October 31, 2016. Ernst & Young has issued their attestation report, which is included in Part II, Item 8 of this Annual Report on Form 10-K.

Indianapolis, Indiana

January 6, 2017

Report of Independent Registered Public Accounting Firm

To the Shareholders and

Board of Directors

of Hurco Companies, Inc.

We have audited the accompanying consolidated balance sheets of Hurco Companies, Inc. as of October 31, 2016 and 2015 and the related consolidated statements of income, comprehensive income, changes in shareholders’ equity and cash flows for each of the three years in the period ended October 31, 2016. Our audits also included the financial statement schedule listed at Item 15(a). These financial statements and schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Hurco Companies, Inc. at October 31, 2016 and 2015 and the consolidated results of its operations and its cash flows for each of the three years in the period ended October 31, 2016 in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Hurco Companies, Inc.’s internal control over financial reporting as of October 31, 2016, based on criteria established in Internal Control – Integrated Framework issued by the Commission of Sponsoring Organizations of the Treadway Commission (2013 framework) and our report dated January 6, 2017 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

Indianapolis, Indiana

January 6, 2017

Report of Independent Registered Public Accounting Firm

To the Shareholders and

Board of Directors

of Hurco Companies, Inc.

We have audited Hurco Companies, Inc.’s internal control over financial reporting as of October 31, 2016, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 Framework) (the COSO criteria). Hurco Companies, Inc.’s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Annual Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Hurco Companies, Inc. maintained, in all material respects, effective internal control over financial reporting as of October 31, 2016, based on the COSO criteria.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Hurco Companies, Inc. as of October 31, 2016 and 2015 and the related consolidated statements of income, comprehensive income, changes in shareholders’ equity and cash flows for each of the three years in the period ended October 31, 2016 of Hurco Companies, Inc. and our report dated January 6, 2017 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

Indianapolis, Indiana

January 6, 2017

HURCO COMPANIES, INC.

CONSOLIDATED STATEMENTS OF INCOME

The accompanying notes are an integral part of the consolidated financial statements.

HURCO COMPANIES, INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME

The accompanying notes are an integral part of the consolidated financial statements.

HURCO COMPANIES, INC.

CONSOLIDATED BALANCE SHEETS

The accompanying notes are an integral part of the consolidated financial statements.

HURCO COMPANIES, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

The accompanying notes are an integral part of the consolidated financial statements.

HURCO COMPANIES, INC.

CONSOLIDATED STATEMENTS OF CHANGES IN SHAREHOLDERS' EQUITY