ICHOR HOLDINGS, LTD. - Annual Report: 2021 (Form 10-K)

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D. C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended December 31, 2021

or

For the transition period from            to           

Commission File Number 001‑37961

ICHOR HOLDINGS, LTD.

(Exact name of registrant as specified in its charter)

3185 Laurelview Ct.

Fremont, California 94538

(Address of principal executive offices, including Zip Code)

(510) 897-5200

(Registrant's telephone number, including area code)

Not Applicable

(Former name or former address, if changed since last report)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well‑known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes  ☐    No  ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes  ☐    No  ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  ☒    No  ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S‑T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    Yes  ☒    No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non‑accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b‑2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.     ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes‑Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report.  ☒

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b‑2 of the Act).    Yes  ☐    No  ☒

There were 28,592,634 ordinary shares, $0.0001 par value, outstanding as of February 22, 2022. The aggregate market value of voting ordinary shares held by non-affiliates was $1,479,680,000 as of June 25, 2021, the last business day of our most recently completed second fiscal quarter.

DOCUMENTS INCORPORATED BY REFERENCE

The information required by Part III of Form 10‑K is incorporated herein by reference to the registrant’s definitive Proxy Statement relating to its 2022 General Meeting, which will be filed with the Securities and Exchange Commission within 120 days after the end of the registrant’s fiscal year.

TABLE OF CONTENTS

CAUTIONARY STATEMENT CONCERNING FORWARD‑LOOKING STATEMENTS

This report contains forward-looking statements within the meaning of the federal securities laws. All statements other than statements of historical fact included in this report are forward-looking statements. These statements relate to analyses and other information, which are based on forecasts of future results and estimates of amounts not yet determinable. These statements also relate to our future prospects, developments and business strategies. These forward-looking statements are identified by the use of terms and phrases such as “anticipate,” “believe,” “could,” “estimate,” “expect,” “intend,” “may,” “plan,” “predict,” “project,” “will” and similar terms and phrases, including references to assumptions. However, these words are not the exclusive means of identifying such statements. These statements are contained in many sections of this report, including those entitled Item 1 – Business and Item 7 – Management’s Discussion and Analysis of Financial Condition and Results of Operations. Although we believe that our plans, intentions and expectations reflected in or suggested by such forward-looking statements are reasonable, we cannot assure you that we will achieve those plans, intentions or expectations. All forward-looking statements are subject to risks and uncertainties that may cause actual results to differ materially from those that we expected.

Important factors that could cause actual results to differ materially from our expectations, or cautionary statements, are disclosed under the sections entitled Item 1A – Risk Factors and Item 7 – Management’s Discussion and Analysis of Financial Condition and Results of Operations in this report. All written and oral forward-looking statements attributable to us, or persons acting on our behalf, are expressly qualified in their entirety by the cautionary statements contained in this report under the heading Item 1A – Risk Factors, as well as other cautionary statements that are made from time to time in our other filings with the Securities and Exchange Commission and public communications. You should evaluate all forward-looking statements made in this report in the context of these risks and uncertainties.

We caution you that the important factors referenced above may not contain all of the factors that are important to you. In addition, we cannot assure you that we will realize the results or developments we expect or anticipate or, even if substantially realized, that they will result in the consequences or affect us or our operations in the way we expect. The forward-looking statements included in this report are made only as of the date hereof. We undertake no obligation to publicly update or revise any forward-looking statement as a result of new information, future events or otherwise, except as otherwise required by law.

PART I

ITEM 1. BUSINESS

Unless expressly indicated or the context requires otherwise, the terms “Ichor,” “Company,” “we,” “us,” “our,” and similar terms in this report refer to Ichor Holdings, Ltd. and its consolidated subsidiaries.

We use a 52- or 53-week fiscal year ending on the last Friday in December. The following table details our fiscal periods included elsewhere in this report. All references to 2021, 2020, and 2019, including the quarters thereto, relate to our fiscal period as so detailed.

Company Overview

We are a leader in the design, engineering, and manufacturing of critical fluid delivery subsystems and components for semiconductor capital equipment. Our product offerings include gas and chemical delivery systems and subsystems, collectively known as fluid delivery systems and subsystems, which are key elements of the process tools used in the manufacturing of semiconductor devices. Our gas delivery subsystems deliver, monitor, and control precise quantities of the specialized gases used in semiconductor manufacturing processes such as etch and deposition. Our chemical delivery systems and subsystems precisely blend and dispense the reactive liquid chemistries used in semiconductor manufacturing processes such as chemical-mechanical planarization, electroplating, and cleaning. We also provide precision-machined components, weldments, electron beam (“e‑beam”) and laser-welded components, precision vacuum and hydrogen brazing and surface treatment technologies, and other proprietary products. This vertically integrated portion of our business is primarily focused on metal and plastic parts that are used in gas and chemical systems, respectively.

Fluid delivery subsystems ensure accurate measurement and uniform delivery of specialty gases and chemicals at critical steps in the semiconductor manufacturing processes. Any malfunction or material degradation in fluid delivery reduces yields and increases the likelihood of manufacturing defects in these processes. Most original equipment manufacturers (“OEMs”) outsource all or a portion of the design, engineering, and manufacturing of their gas delivery subsystems to a few specialized suppliers, including us. Additionally, many OEMs are outsourcing the design, engineering, and manufacturing of their chemical delivery subsystems due to the increased fluid expertise required to manufacture these subsystems. Outsourcing these subsystems has allowed OEMs to leverage the suppliers’ highly specialized engineering, design, and production skills while focusing their internal resources on their own value-added processes. We believe that this outsourcing trend has enabled OEMs to reduce their costs and development time, as well as provide growth opportunities for specialized subsystems suppliers like us.

Our goal is to be a leading supplier of fluid delivery subsystems and components to OEMs engaged in manufacturing capital equipment to produce semiconductors and to leverage our technology and products to expand the share of our addressable markets. To achieve this goal, we engage with our customers early in their design and development processes and utilize our deep engineering resources and operating expertise, as well as our expanded product portfolio, to jointly create innovative and advanced solutions that meet the current and future needs of our customers. We employ this approach with three of the largest manufacturers of semiconductor capital equipment in the world. We believe this approach enables us to design products that meet the precise specifications our customers demand, allows us to often be the sole supplier of these subsystems during the initial production ramp, and positions us to be the preferred supplier for the full five to ten-year lifespan of the process tool.

1

The broad technical expertise of our engineering team, coupled with our early customer engagement approach, enables us to offer innovative and reliable solutions to complex fluid delivery challenges. With two decades of experience developing complex fluid delivery subsystems and meeting the constantly changing production requirements of leading semiconductor OEMs, we have developed expertise in fluid delivery that we offer to our OEM customers. In addition, our capital efficient model provides us the flexibility to fulfill increased demand and meet changing customer requirements with relatively low levels of capital expenditures. With an aim to provide superior customer service, we have a global footprint with many facilities strategically located in close proximity to our customers. We have long standing relationships with top tier OEM customers, including Lam Research, Applied Materials, and ASML, which were our three largest customers by sales in 2021.

We generated revenue of $1,096.9 million, $914.2 million, and $620.8 million in 2021, 2020, and 2019, respectively. We generated net income of $70.9 million, $33.3 million, and $10.7 million on a GAAP basis in 2021, 2020, and 2019, respectively, and $97.7 million, $59.0 million, and $28.3 million on a non-GAAP basis, respectively. See Item 7 – Management's Discussion and Analysis of Financial Condition and Results of Operations, Non-GAAP Results for a discussion of non-GAAP net income, an accompanying presentation of the most directly comparable financial measure calculated in accordance with generally accepted accounting principles in the United States, net income, and a reconciliation of the differences between non-GAAP net income and net income.

Our Competitive Strengths

As a leader in the fluid delivery industry, we believe that our key competitive strengths include the following:

Deep Fluids Engineering Expertise

We believe that our engineering team, comprised of chemical, mechanical, electrical, software, and systems engineers, has positioned us to expand the scope of our solutions, provide innovative products and subsystems, and strengthen our incumbent position at our OEM customers. Our engineering team acts as an extension of our customers’ product development teams, providing our customers with technical expertise that is outside of their core competencies.

Early Engagement with Customers on Product Development

We seek to engage with our customers and potential customers very early in their process for new product development. We believe this approach enables us to collaborate on product design, qualification, manufacturing, and testing in order to provide a comprehensive, customized solution. Through early engagement during the complex design stages, our engineering team gains early insight into our customers’ technology roadmaps which enables us to pioneer innovative and advanced solutions. In many cases, our early engagement with our customers enables us to be the sole source supplier when the product is initially introduced.

Long History and Strong Relationships with Top Tier Customers

We have established deep relationships with top tier OEMs such as Lam Research, Applied Materials, and ASML, which were our three largest customers by sales in 2021. Our customers are global leaders by sales in the semiconductor capital equipment industry. Our existing relationships with our customers have enabled us to effectively compete for new fluid delivery subsystems for our customers’ next generation products in development. We leverage our deep-rooted existing customer relationships with these market leaders to penetrate new business opportunities created through industry consolidation. Our close collaboration with them has contributed to our established market position and several key supplier awards.

Operational Excellence with Scale to Support the Largest Customers

Over our 20‑plus year experience in designing and building fluid delivery systems, we have developed deep capabilities in operations. We have strategically located our manufacturing facilities near our customers’ locations in order to provide fast and efficient responses to new product introductions and accommodate configuration or design changes late in the manufacturing process. We will continue to add capacity as needed to support future growth. In addition to providing high quality and reliable fluid delivery subsystems, one of our principal strategies is delivering the lead-times that provide our customers the required flexibility needed in their production processes. We have accomplished this by investing in manufacturing systems and processes and an efficient supply chain. Our focus on operational efficiency and flexibility allows us to reduce manufacturing cycle times in order to respond quickly to customer requests and lead-times that are often less than four weeks.

2

Capital Efficient and Scalable Business Model

In general, our business is not capital intensive and we are able to grow sales with a low investment in property, plant, and equipment. In 2021, 2020, and 2019, our total capital expenditures were$20.8 million, $10.3 million, and $12.3 million, respectively, representing only 1.9%, 1.1%, and 2.0%, of sales, respectively. The semiconductor capital equipment market has historically been cyclical. We have structured our business to minimize fixed manufacturing overhead and operating expenses to enable us to grow net income at a higher rate than sales during periods of growth. Conversely, our low fixed cost approach allows us to minimize the impact of cyclical downturns on our net income but results in a lower level of gross margin leverage or improvement as a percentage of sales in times of increased demand.

Our Growth Strategy

Our objective is to enhance our position as a leader in providing fluid delivery solutions, including subsystems, components, and legacy tool refurbishment, to our customers by leveraging our core strengths. The key elements of our growth strategy are:

Grow Our Market Share within Existing Customer Base

We intend to grow our position within our existing customers by continuing to leverage our specialized engineering talent, early collaboration approach with OEMs to foster long-term relationships, and expanded product offerings. Each of our customers produces many different process tools for various process steps. At each customer, we are an outsourced supplier of fluid delivery subsystems and components for a subset of their entire process tool offerings. We are constantly looking to expand our market share at our existing customers. We believe that our early collaborative approach with customers positions us to deliver innovative and dynamic solutions, offer timely deployment and meet competitive cost targets, further increasing our market share. Through our acquisition of IMG Companies, LLC and its subsidiaries (“IMG”), a precision machining and specialty component manufacturing company, in November 2021, our acquisition of a precision machining operation in December 2020, an intellectual property (“IP”) purchase of developed flow controller technology in 2019, and our acquisitions of a weldment company and a precision machining company in 2017, we significantly expanded our product offerings within our served customer base, including entering the market for chemical delivery subsystems for wet process tools where we had only limited engagement in the past. Using this and our existing engineering capability, we developed a liquid delivery module for use on a wet process equipment system that met the specifications of, and was qualified by, one of our largest customers and a market leader in this space.

Grow Our Total Available Market and Share of the Market with Expanded Product Offerings

We continue to work with our existing core customers on additional opportunities, including chemical delivery, one of our important potential growth areas. We believe that wet processes, including clean and electrochemical deposition (“ECD”), that require precise chemical delivery are currently an underpenetrated market opportunity for us. By leveraging our existing customer relationships and strong reputation in fluid mechanics, we intend to increase our chemical delivery module market share and introduce additional related products. Through our acquisition of a precision machining operation in December 2020, our IP purchase of developed flow controller technology in 2019, our acquisition of a Korean gas panel supplier in 2018, and our acquisitions of a weldment company and a precision machining company in 2017, we significantly expanded our served customer base with expanded product offerings. The acquisitions allow us to manufacture and assemble the complex plastic and metal products and precision machined components for the semiconductor equipment, including our existing customer base, as well as medical device, and general-industrial industries, while providing us exposure to and growth opportunities in the Korean and Japanese semiconductor capital equipment market.

Through our acquisition of IMG in November 2021, we have opened up adjacent opportunities within semiconductor capital equipment, including large format machining, hydrogen brazing, and e‑beam and laser welding. Additionally, our acquisition of IMG gave us entrance into new sectors, including medical, aerospace defense, and scientific research, which require our critical machining and joining expertise.

Expand Our Total Customer Base within Fluid Delivery Market

We have expanded our customer base and are currently a supplier of gas delivery systems for a leading lithography system manufacturer, a leading atomic layer deposition (“ALD”) system manufacturer, and Korean process tool OEMs. Our acquisition of IMG further expands our total customer base with new customers in medical, aerospace, and defense. We continue to actively engage with new customers that are considering outsourcing their gas and chemical delivery needs as well as expanding our components business.

3

Continue to Improve Our Manufacturing Process Efficiency

We continually strive to improve our processes to reduce our manufacturing process cycle time, improve our ability to respond to short lead-time and last minute configuration changes, reduce our manufacturing costs, and improve our inventory efficiency requirements in order to improve profitability and make our product offerings more attractive to new and existing customers.

Our Products and Services

We are a leader in the design, engineering and manufacturing of critical fluid delivery subsystems. Our product and service offerings are classified in the following categories:

Gas Delivery Subsystems

Gas delivery is among the most technologically complex functions in semiconductor capital equipment and is used to deliver, monitor and control precise quantities of the vapors and gases critical to the manufacturing process. Our gas delivery systems consist of a number of gas lines, each controlled by a series of mass flow controllers, regulators, pressure transducers, and valves, and an integrated electronic control system. Our gas delivery subsystems are primarily used in equipment for “dry” manufacturing processes, such as etch, chemical vapor deposition, physical vapor deposition, epitaxy, and strip.

4

Chemical Delivery Products and Subsystems

Our chemical delivery products and subsystems are used to precisely blend and dispense reactive chemistries and colloidal slurries critical to the specific “wet” front-end process, such as wet clean, electro chemical deposition, and chemical-mechanical planarization (“CMP”). In addition to the chemical delivery subsystem, we also manufacture the process modules that apply the various chemicals directly to the wafer in a process and application-unique manner to create the desired chemical reaction.

The image below shows a typical wet-process front end semiconductor tool, with a chemical delivery subsystem and corresponding application process module highlighted:

Weldments and Specialty Joining

Our complete offering of weldments support the delivery of gases through the process tool. We have developed both automated and manual welding processes to support world class workmanship on all types of metals needed to support fluid delivery within the semiconductor market. The welded assemblies are used in both wet and dry processes, non-semi applications including aerospace and defense, medical, and general industrial markets. We offer a wide range of specialty joining technologies including orbital, tungsten inert gas (“TIG”), e‑beam, and laser welding, as well as hydrogen and vacuum brazing.

Precision Machining

Precision machining provides us the ability to supply our customers with components used in our gas delivery systems and weldments, while also providing custom machined solutions throughout customers’ equipment. Many of these items are used downstream of the gas system and in process critical applications. Our precision machined products can be used in both wet and dry applications and include both small- and large‑format machining applications. Machined components are also provided to other critical non‑semiconductor markets, including aerospace and medical.

5

History

We were originally incorporated as Celerity, Inc. (“Celerity”) in 1999. Our business of designing and manufacturing critical systems for semiconductor capital equipment manufacturers operated as a standalone business until 2009 when Celerity sold the business to a private equity fund. Francisco Partners (“FP”) acquired the business in December 2011 and formed Ichor Holdings, Ltd., an exempt company incorporated in the Cayman Islands, in March 2012 to serve as the parent company as part of a restructuring to accommodate the expansion of our business in Singapore and Malaysia. We completed the initial public offering of our ordinary shares in December 2016. We have grown through opportunistic acquisitions, which include:

We intend to continue to evaluate opportunistic acquisitions to supplement our organic growth.

Customers, Sales and Marketing

We primarily market and sell our products directly to equipment OEMs in the semiconductor equipment market. In Japan, we utilize a value-added reseller to market and sell our chemical delivery system. We are dependent upon a small number of customers, as the semiconductor equipment manufacturer market is highly concentrated with five companies accounting for over 80% of all process tool revenues. For 2021, our two largest customers were Lam Research and Applied Materials, which accounted for 53% and 32% of sales, respectively. We do not have long-term contracts that require customers to place orders with us in fixed or minimum volumes, and we generally operate on a purchase order basis with customers.

Our sales and marketing efforts focus on fostering close business relationships with our customers. As a result, we locate many of our account managers near the customer they support. Our sales process involves close collaboration between our account managers and engineering and operations teams. Account managers and engineers work together with customers and in certain cases provide on-site support, including attending customers’ internal meetings related to production and engineering design. Each customer project is supported by our account managers and customer support team who ensure we are aligned with all of the customer’s quality, cost, and delivery expectations.

Operations, Manufacturing and Supply Chain Management

We have developed a highly flexible manufacturing model with cost-effective locations situated nearby the manufacturing facilities of our largest customers. We have facilities in the United States, Singapore, Malaysia, the United Kingdom, Korea, and Mexico.

Operations

Our product cycle engagements begin by working closely with our customers to outline the solution specifications before design and prototyping even begin. Our design and manufacturing process is highly flexible, enabling our customers to make alterations to their final requirements throughout the design, engineering, and manufacturing process. This flexibility results in significantly decreased order-to-delivery cycle times for our customers. For instance, it can take as little as 20 to 30 days for us to manufacture a gas delivery system with fully evaluated performance metrics after receiving an order.

6

Manufacturing

We are ISO 9001 certified or compliant at our manufacturing locations, and our manufactured subsystems and modules adhere to strict design tolerances and specifications. We operate Class 100 and Class 10,000 clean room facilities for customer-specified testing, assembly, and integration of high-purity gas and chemical delivery systems at our locations in Singapore, Oregon, Texas, and Korea. We operate additional facilities in Malaysia, Oregon, Texas, and California for weldments and related components used in our gas delivery subsystems, and we operate facilities in Oregon and Malaysia for critical components used in our chemical delivery subsystems. We operate facilities in California, Minnesota, and Mexico for precision machining of components for sale to our customers and internal use, as well as specialty joining and plating technologies. Many of our facilities are located in close proximity to our largest customers to allow us to collaborate with them on a regular basis and to enable us to deliver our products on a just-in-time basis, regardless of order size or the degree of changes in the applicable configuration or specifications.

We qualify and test key components that are integrated into our subsystems and test our fluid delivery subsystems during the design process and again prior to shipping. Our quality management system allows us to access real-time corrective action reports, non-conformance reports, customer complaints, and controlled documentation. In addition, our senior management conducts quarterly reviews of our quality control system to evaluate effectiveness. Our customers also complete quarterly surveys which allow us to measure satisfaction.

Supply Chain Management

We use a wide range of components and materials in the production of our gas and chemical delivery systems, including filters, mass flow controllers, regulators, pressure transducers, and valves. We obtain components and materials from a large number or sources, including single source and sole source suppliers.

We use consignment material and just-in-time stocking programs to better manage our component inventories and better respond to changing customer requirements. These approaches enable us to significantly reduce our inventory levels and maintain flexibility in responding to changes in product demand. A key part of our strategy is to identify multiple suppliers with a strong global reach that are located within close proximity to our manufacturing locations.

Technology Development and Engineering

We have a long history of engineering innovation and development. We continue to transition from being an integration engineering and components company into a gas and chemical delivery system and subsystem leader with product development and systems engineering, as well as integration expertise. Our industry continues to experience rapid technological change, requiring us to continuously invest in technology and product development and regularly introduce new products and features that meet our customers’ evolving requirements.

We have built a team of fluid delivery experts. As of December 31, 2021, our engineering team consisted of approximately 90 engineers and designers with mechanical, electrical, chemical, systems, and software expertise. Our engineers are closely connected with our customers and typically work at our customers’ sites and operate as an extension of our customers’ design team. We engineer within our customers’ processes, design vaults, drawing standards, and part numbering systems. These development efforts are designed to meet specific customer requirements in the areas of subsystem design, materials, component selection, and functionality. The majority of our sales are generated from projects during which our engineers cooperated with our customer early in the design cycle. Through this early collaborative process, we become an integral part of our customers’ design and development processes, and we are able to quickly anticipate and respond to our customers’ changing requirements.

Our engineering team also works directly with our suppliers to help them identify new component technologies and make necessary changes in, and enhancements to, the components that we integrate into our products. Our analytical and testing capabilities enable us to evaluate multiple supplier component technologies and provide customers with a wide range of appropriate component and design choices for their gas and chemical delivery systems and other critical subsystems. Our analytical and testing capabilities also help us anticipate technological changes and the requirements in component features for next-generation gas delivery systems and other critical subsystems.

Competition

The markets for our products are very competitive. When we compete for new business, we face competition from other suppliers of gas or chemical delivery subsystems, and in some cases with the internal manufacturing groups of OEMs. While many OEMs have outsourced the design and manufacturing of their gas and chemical delivery systems, we would face additional competition if in the future these OEMs elected to develop and build these systems internally.

7

The fluid delivery subsystem market is concentrated, and we face competition primarily from Ultra Clean Technology, with additional competition from regional suppliers. The chemical delivery subsystem, weldments, and precision machining industries are fragmented, and we face competition from numerous smaller suppliers. In addition, the market for tool refurbishment is fragmented, and we compete with many regional competitors. The primary competitive factors we emphasize include:

We expect our competitors to continue to improve the performance of their current products and to introduce new products or new technologies that could adversely affect sales of our current and future products. In addition, the limited number of potential customers in our industry further intensifies competition. We anticipate that increased competitive pressures may cause intensified price-based competition and we may have to reduce the prices of our products. In addition, we expect to face new competitors as we enter new markets.

Intellectual Property

Our success depends, in part, upon our ability to develop, maintain, and protect our technology and products and to conduct our business without infringing the proprietary rights of others. We continue to invest in securing intellectual property protection for our technology and products and protect our technology by, among other things, filing patent applications. We also rely on a combination of trade secrets and confidentiality provisions, and to a much lesser extent, copyrights and trademarks, to protect our proprietary rights. We have historically focused our patent protection efforts in the United States. As of December 31, 2021, we had 58 granted patents and 31 pending patent applications, of which 27 and 21 are U.S. patents, respectively. While we consider our patents to be valuable assets, we do not believe the success of our business or our overall operations are dependent upon any single patent or group of related patents. In addition, we do not believe that the loss or expiration of any single patent or group of related patents would materially affect our business.

We develop intellectual property for our own use in our products, as well as for our customers. Intellectual property developed on behalf of our customers is generally owned exclusively by those customers. In addition, we have agreed to indemnify certain of our customers against claims of infringement of the intellectual property rights of others with respect to our products. Historically, we have not paid any claims under these indemnification obligations, and we do not have any pending indemnification claims against us.

Human Capital Resources

As a globally successful company, we believe that we must be a good corporate citizen, socially responsible, and provide a safe and thriving environment for our employees, who we consider our most important asset. All employees of Ichor are committed to a set of core values that define company culture, represent what we believe, and guide our actions. We recognize and value each person’s diverse background and unique skill set and seek to foster an environment that encourages personal growth and professional development. We continue to extend our commitment to diversity, inclusion, and equity through specific policies, practices, employee and manager training, and dedicated executive leadership. Below are details demonstrating our commitment in this area.

Demographics

As of December 31, 2021, we had approximately 1,850 full‑time employees and 690 contract or temporary workers, which allow flexibility as business conditions and geographic demand change. Of our total workforce, approximately 90 are engineers, 80 are engaged in sales and marketing, 2,240 are engaged in manufacturing, and 130 perform executive and administrative functions. Our employees are not unionized, and we have no participation in works councils. We have not experienced any material work stoppages at any of our facilities, with the exception of temporary shutdowns at our Malaysia facility in June and July 2021 due to the COVID‑19 pandemic. We believe our relationship with our employees to be good.

8

Total Rewards

As part of our total rewards philosophy, we believe in offering market-competitive compensation and benefits programs for our employees to attract and retain a talented and productive workforce. Our programs are designed to be externally competitive, internally fair and equitable, and our pay-for-performance philosophy aims to reward each individual for their contributions while striving for equal pay for work regardless of gender, race, or ethnicity. We offer a combination of fixed and variable pay, which can vary by business and function. For our leadership and key talent, we provide equity based long-term compensation to create retention and incentive towards the company’s strategies and objectives. We provide benefits that are locally competitive, including retirement and savings plans with company contributions, health and welfare plans aimed to provide protection for employees, and in some instances, protection for employees’ families, and we provide a discounted employee stock purchase plan. We invest in wellness programs to promote physical, emotional, and financial well-being. In 2021, we continued our employee cash spot bonus program, which recognizes employee contributions to our business.

Learning and Development

We support our employees in their career development by providing a multi-dimensional approach to learning and development, including internal and external opportunities for professional development. This includes tuition reimbursement, online training, on the job training, diversity and inclusion training, and managerial coaching. We actively invest in leadership development, cultivating involvement, engagement, and empowerment of our future leaders in an active investment in succession planning and development. We also believe that maintaining an effective employee review and appraisal process, with regular managerial feedback and coaching, is critical to cultivating a learning organization.

Health and Safety

We are committed to monitoring and maintaining a healthy and safe environment for our employees. We facilitate “skip level” sessions, periodically survey employees, and use other communication forums to allow employees to express their opinions and concerns to management. We maintain a professional Human Resources department and provide a "whistle blower" hotline available to all employees for communicating concerns, including those involving health and safety. During the COVID‑19 pandemic, we took necessary steps to ensure the health and safety of our employees and extended communities by following and often exceeding CDC and other government health organization guidelines from around the world. We adopted a policy to support remote and hybrid working options for office staff and made a significant investment in our IT infrastructure to enable uninterrupted virtual communication. For factory workers, we maintain strict guidelines to uphold safety of our workforce and business continuity, including health screenings, social distancing protocols, the use of personal protective equipment, and in certain regions testing protocols.

Community Involvement

We continued our charitable contributions this past year to include educational scholarships specifically earmarked for under-represented minority groups attending college. We invest in local community colleges in the regions where we live and work to support the education and development opportunities supporting the advancement of manufacturing skill sets, such as machinists and welding. We support local foodbanks and other local charities in the communities in which we operate.

Environmental, Health, and Safety Regulations

Our operations and facilities are subject to federal, state, and local regulatory requirements and foreign laws and regulations, relating to environmental, waste management, and health and safety matters, including those relating to the release, use, storage, treatment, transportation, discharge, disposal, and remediation of contaminants, hazardous substances, and wastes, as well as practices and procedures applicable to the construction and operation of our facilities. We believe that our business is operated in substantial compliance with applicable regulations. However, in the future we could incur substantial costs, including cleanup costs, fines or civil or criminal sanctions, or third-party property damage, or personal injury claims, in the event of violations or liabilities under these laws and regulations, or non-compliance with the environmental permits required at our facilities. Potentially significant expenditures could be required in order to comply with environmental laws that may be adopted or imposed in the future. We are not aware of any threatened or pending environmental investigations, lawsuits, or claims involving us, our operations, or our current or former facilities.

9

Available Information

Our internet address is ichorsystems.com. We make a variety of information available, free of charge, at our Investor Relations website, ir.ichorsystems.com. This information includes our Annual Reports on Form 10‑K, our Quarterly Reports on Form 10‑Q, our Current Reports on Form 8‑K, and any amendments to those reports as soon as reasonably practicable after we electronically file those reports with or furnish them to the Securities and Exchange Commission (“SEC”), as well as our Code of Business Ethics and Conduct and other governance documents.

The SEC maintains an internet site that contains reports, proxy and information statements, and other information regarding issuers that file documents electronically with the SEC at sec.gov.

The contents of these websites, or the information connected to those websites, are not incorporated into this report. References to websites in this report are provided as a convenience and do not constitute, and should not be viewed as, incorporation by reference of the information contained on, or available through, the website.

ITEM 1A. RISK FACTORS

There are many factors that affect our business and the results of operations, some of which are beyond our control. The following is a description of some important factors that may cause the actual results of operations in future periods to differ materially from those currently expected or desired.

Risk Factor Summary

The following is a summary of some important risk factors that could adversely affect our business, operations, and financial results.

Economic and Strategic Risks

Operational Risks

10

Legal and Regulatory Risks

Liquidity and Capital Resources Risks

Ordinary Share Ownership Risks

Economic and Strategic Risks

Our business depends significantly on expenditures by manufacturers in the semiconductor capital equipment industry, which, in turn, is dependent upon the semiconductor device industry. When that industry experiences cyclical downturns, demand for our products and services is likely to decrease, which would likely result in decreased sales. We may also be forced to reduce our prices during cyclical downturns without being able to proportionally reduce costs.

Our business, financial condition and results of operations depend significantly on expenditures by manufacturers in the semiconductor capital equipment industry. In turn, the semiconductor capital equipment industry depends upon the current and anticipated market demand for semiconductor devices. The semiconductor device industry is subject to cyclical and volatile fluctuations in supply and demand and in the past has periodically experienced significant downturns, which often occur in connection with declines in general economic conditions, and which have resulted in significant volatility in the semiconductor capital equipment industry. The semiconductor device industry has also experienced recurring periods of over-supply of products that have had a severe negative effect on the demand for capital equipment used to manufacture such products. We have experienced, and anticipate that we will continue to experience, significant fluctuations in customer orders for our products and services as a result of such fluctuations and cycles. Any downturns in the semiconductor device industry could have a material adverse effect on our business, financial condition and results of operations.

11

In addition, we must be able to appropriately align our cost structure with prevailing market conditions, effectively manage our supply chain and motivate and retain employees, particularly during periods of decreasing demand for our products. We may be forced to reduce our prices during periods of decreasing demand. While we operate under a low fixed cost model, we may not be able to proportionally reduce all of our costs if we are required to reduce our prices. If we are not able to timely and appropriately adapt to the changes in our business environment, our business, financial condition and results of operations will be materially adversely affected. The cyclical and volatile nature of the semiconductor device industry and the absence of long-term fixed or minimum volume contracts make any effort to project a material reduction in future sales volume difficult.

We rely on a very small number of OEM customers for a significant portion of our sales. Any adverse change in our relationships with these customers could materially adversely affect our business, financial condition and results of operations.

The semiconductor capital equipment industry is highly concentrated and has experienced significant consolidation in recent years. As a result, a relatively small number of OEM customers have historically accounted for a significant portion of our sales, and we expect this trend to continue for the foreseeable future. For 2021, our top two customers accounted for approximately 53% and 32%, respectively, of sales, and we expect that our sales will continue to be concentrated among a very small number of customers. We do not have any long-term contracts that require customers to place orders with us in fixed or minimum volumes. Accordingly, the success of our business depends on the success of our customers and those customers and other OEMs continuing to outsource the manufacturing of critical subsystems and process solutions to us. Because of the small number of OEMs in the markets we serve, a number of which are already our customers, it would be difficult to replace lost sales resulting from the loss of, or the reduction, cancellation or delay in purchase orders by, any one of these customers, whether due to a reduction in the amount of outsourcing they do, their giving orders to our competitors, their acquisition by an OEM who is not a customer or with whom we do less business, or otherwise. We have in the past lost business from customers for a number of these reasons. If we are unable to replace sales from customers who reduce the volume of products and services they purchase from us or terminate their relationship with us entirely, such events could have a material adverse impact on our business, financial condition and results of operations.

Additionally, if one or more of the largest OEMs were to decide to single- or sole-source all or a significant portion of manufacturing and assembly work to a single equipment manufacturer, such a development would heighten the risks discussed above.

Our customers exert a significant amount of negotiating leverage over us, which may require us to accept lower prices and gross margins or take on increased liability risk in order to retain or expand our market share with them.

By virtue of our largest customers’ size and the significant portion of our sales that is derived from them, as well as the competitive landscape, our customers are able to exert significant influence and pricing pressure in the negotiation of our commercial arrangements and the conduct of our business with them. Our customers often require reduced prices or other pricing, quality or delivery commitments as a condition to their purchasing from us in any given period or increasing their purchase volume, which can, among other things, result in reduced gross margins in order to maintain or expand our market share. Our customers’ negotiating leverage also can result in customer arrangements that may contain significant liability risk to us. For example, some of our customers require that we provide them indemnification against certain liabilities in our arrangements with them, including claims of losses by their customers caused by our products. Any increase in our customers’ negotiating leverage may expose us to increased liability risk in our arrangements with them, which, if realized, may have a material adverse effect on our business, financial condition and results of operations. In addition, new products often carry lower gross margins than existing products for several quarters following their introduction. If we are unable to retain and expand our business with our customers on favorable terms, or if we are unable to achieve gross margins on new products that are similar to or more favorable than the gross margins we have historically achieved, our business, financial condition and results of operations may be materially adversely affected.

The industries in which we participate are highly competitive and rapidly evolving, and if we are unable to compete effectively, our business, financial condition and results of operations could be materially adversely affected.

We face intense competition from other suppliers of gas or chemical delivery subsystems, as well as the internal manufacturing groups of OEMs. Increased competition has in the past resulted, and could in the future result, in price reductions, reduced gross margins or loss of market share, any of which would materially adversely affect our business, financial condition and results of operations. We are subject to significant pricing pressure as we attempt to maintain and increase market share with our existing customers. Our competitors may offer reduced prices or introduce new products or services for the markets currently served by our products and services. These products may have better performance, lower prices and achieve broader market acceptance than our products. OEMs also typically own the design rights to their products. Further, if our competitors obtain proprietary rights to these designs such that we are unable to obtain the designs necessary to manufacture products for our OEM customers, our business, financial condition and results of operations could be materially adversely affected.

12

Certain of our competitors may have or may develop greater financial, technical, manufacturing and marketing resources than we do. As a result, they may be able to respond more quickly to new or emerging technologies and changes in customer requirements, devote greater resources to the development, promotion, sale and support of their products and services, and reduce prices to increase market share. In addition to organic growth by our competitors, there may be merger and acquisition activity among our competitors and potential competitors that may provide our competitors and potential competitors with an advantage over us by enabling them to expand their product offerings and service capabilities to meet a broader range of customer needs. The introduction of new technologies and new market entrants may also increase competitive pressures.

We are exposed to risks associated with weakness in the global economy and geopolitical instability.

Our business is dependent upon manufacturers of semiconductor capital equipment, whose businesses in turn ultimately depend largely on consumer spending on semiconductor devices. Continuing uncertainty regarding the global economy continues to pose challenges to our business. Economic uncertainty and related factors, including current unemployment levels, uncertainty in debt markets, geopolitical instability in various parts of the world, fiscal uncertainty in the U.S. economy, market volatility and the slow rate of recovery of many countries from recent recessions, exacerbate negative trends in business and consumer spending and may cause certain of our customers to push out, cancel or refrain from placing orders for products or services, which may reduce sales and materially adversely affect our business, financial condition and results of operations. Difficulties in obtaining capital, uncertain market conditions or reduced profitability may also cause some customers to scale back operations, exit businesses, merge with other manufacturers, or file for bankruptcy protection and potentially cease operations, leading to customers’ reduced research and development funding and/or capital expenditures and, in turn, lower orders from our customers and/or additional slow moving or obsolete inventory or bad debt expense for us. These conditions may also similarly affect our key suppliers, which could impair their ability to deliver parts and result in delays for our products or require us to either procure products from higher-cost suppliers, or if no additional suppliers exist, to reconfigure the design and manufacture of our products, and we may be unable to fulfill some customer orders. Any of these conditions or events could have a material adverse effect on our business, financial condition and results of operations.

The withdrawal of the United Kingdom (“U.K.”) from the European Union (“E.U.”) (commonly referred to as “Brexit”) took effect on January 31, 2020. On December 30, 2020, the U.K. passed legislation giving effect to a trade and cooperation agreement with the E.U., which became effective on May 1, 2021. Under the trade and cooperation agreement, U.K. service suppliers no longer benefit from automatic access to the entire E.U. single market, U.K. goods no longer benefit from the free movement of goods and there is no longer the free movement of people between the U.K. and the E.U. Brexit may also lead to legal uncertainty and potentially divergent national laws and regulations as the U.K. determines which E.U. laws to replace or replicate, and those laws and regulations may be cumbersome, difficult or costly in terms of compliance. Any of these effects of Brexit, among others, could adversely affect our business, financial condition, operating results and cash flows.

Our business has been adversely affected by the COVID‑19 pandemic and we continue to face risks related to COVID‑19 which could significantly disrupt our operations, customer demand, and our suppliers’ ability to support us, resulting in material adverse impacts to our business, financial condition, operating results, and cash flows.

COVID-19 has had, and continues to have, a significant impact around the world, prompting governments and businesses to take unprecedented measures in response. Such measures have included restrictions on travel and business operations, temporary closures of businesses, and quarantine and shelter-in-place orders. The COVID-19 pandemic has at times significantly curtailed global economic activity and caused significant volatility and disruption in global financial markets.

Shelter-in-place orders and other measures, including work-from-home and social distancing policies implemented to protect employees, have resulted in reduced workforce availability at product manufacturing sites, construction delays, and reduced output at some of our vendors and suppliers. Restrictions on our access to or operation of manufacturing facilities or on our support operations or workforce, or similar limitations for our vendors and suppliers, can impact our ability to meet customer demand and could have a material adverse effect on our financial condition and results of operations, particularly if prolonged. Similarly, current and future restrictions or disruptions of transportation, such as reduced availability of air transport, port closures, and increased border controls or closures, can also impact our ability to meet demand and could materially adversely affect us. Our customers have experienced, and may continue to experience, disruptions in their operations and supply chains, which can result in delayed, reduced, or canceled orders, or collection risks, and which may adversely affect our results of operations.

13

The spread of COVID‑19 has caused us to modify our business practices (including employee travel, employee work locations, cancellation of physical participation in meetings, events and conferences, and social distancing measures), and we may take further actions as may be required by government authorities or that we determine are in the best interests of our employees, customers, partners, vendors, and suppliers. Work-from-home and other measures introduce additional operational risks, including cybersecurity risks, and have affected the way we conduct our product development, validation, and qualification, customer support, and other activities, which could have an adverse effect on our operations. There is no certainty that such measures will be sufficient to mitigate the risks posed by the virus, and illness and workforce disruptions could lead to unavailability of key personnel and harm our ability to perform critical functions.

The extent of the impact of COVID‑19 on our operational and financial performance will depend on future developments outside our control, including, but not limited to, the timing, extent, trajectory and duration of the pandemic; the emergence of new variants; the development, availability and effectiveness of vaccines and treatments; and the imposition of protective public safety measures, including travel advisories and restrictions. In most countries in which we operate, the local government authorities have designated our operations as an “essential business,” which allows us to continue to operate our factories and business under specific rules and protocols designed to ensure the health and safety of our employees, suppliers, and visitors to our facilities. However, changes to this classification may result in potential closure of our operations for an uncertain duration, in turn impacting our business. Preventing the effects from, and responding to, this market disruption or any other public health threat, related or otherwise, may further increase costs of our business and may have a material adverse effect on our business, financial condition, and results of operations.

If we do not keep pace with developments in the industries we serve and with technological innovation generally, our products and services may not be competitive.

Rapid technological innovation in the markets we serve requires us to anticipate and respond quickly to evolving customer requirements and could render our current product offerings, services and technologies obsolete. In particular, the design and manufacturing of semiconductors is constantly evolving and becoming more complex in order to achieve greater power, performance and efficiency with smaller devices. Capital equipment manufacturers need to keep pace with these changes by refining their existing products and developing new products.

We believe that our future success will depend upon our ability to design, engineer and manufacture products that meet the changing needs of our customers. This requires that we successfully anticipate and respond to technological changes in design, engineering and manufacturing processes in a cost-effective and timely manner. If we are unable to integrate new technical specifications into competitive product designs, develop the technical capabilities necessary to manufacture new products or make necessary modifications or enhancements to existing products, our business, financial condition and results of operations could be materially adversely affected.

The timely development of new or enhanced products is a complex and uncertain process which requires that we:

If we are unsuccessful in keeping pace with technological developments for the reasons above or other reasons, our business, financial condition and results of operations could be materially adversely affected.

14

We must design, develop, and introduce new products that are accepted by OEMs in order to retain our existing customers and obtain new customers.

The introduction of new products is inherently risky because it is difficult to foresee the adoption of new standards, coordinate our technical personnel and strategic relationships and win acceptance of new products by OEMs. We attempt to mitigate this risk by collaborating with our customers during their design and development processes. We cannot, however, assure you that we will be able to successfully introduce, market and cost-effectively manufacture new products, or that we will be able to develop new or enhanced products and processes that satisfy customer needs. In addition, new capital equipment typically has a lifespan of five to ten years, and OEMs frequently specify which systems, subsystems, components and instruments are to be used in their equipment. Once a specific system, subsystem, component or instrument is incorporated into a piece of capital equipment, it will often continue to be purchased for that piece of equipment on an exclusive basis for 18 to 24 months before the OEM generates enough sales volume to consider adding alternative suppliers. Accordingly, it is important that our products are designed into the new systems introduced by the OEMs. If any of the new products we develop are not launched or successful in the market, our business, financial condition and results of operations could be materially adversely affected.

Acquisitions may present integration challenges, and if the goodwill, indefinite-lived intangible assets, and other long-term assets recorded in connection with such acquisitions may become impaired, we would be required to record impairment charges, which may be significant.

We have acquired strategic businesses in the past and if we find appropriate opportunities in the future, we may acquire businesses, products or technologies that we believe are strategic. The process of integrating an acquired business, product or technology may produce unforeseen operating difficulties and expenditures, fail to result in expected synergies or other benefits or absorb significant attention of our management that would otherwise be available for the ongoing development of our business. Our ability to realize anticipated benefits of acquisitions and other strategic initiatives may also be affected by the incurrence of additional indebtedness in connection with financing, regulatory challenges or our ability to retain key employees and customers of the acquired company. In addition, we may record a portion of the assets we acquire as goodwill, other indefinite-lived intangible assets or finite-lived intangible assets. We do not amortize goodwill and indefinite-lived intangible assets, but rather review them for impairment on an annual basis or whenever events or changes in circumstances indicate that their carrying value may not be recoverable. The recoverability of goodwill and indefinite-lived intangible assets is dependent on our ability to generate sufficient future earnings and cash flows. Changes in estimates, circumstances or conditions, resulting from both internal and external factors, could have a significant impact on our fair valuation determination, which could then have a material adverse effect on our business, financial condition and results of operations.

We are subject to fluctuations in foreign currency exchange rates, which could cause operating results and reported financial results to vary significantly from period to period.

The vast majority of our sales are denominated in U.S. dollars. Many of the costs and expenses associated with our Singapore, Malaysian and U.K. operations are paid in Singapore dollars, Malaysian ringgit, British pounds, or euros, respectively, and we expect our exposure to these currencies to increase as we increase our operations in those countries. As a result, our risk exposure from transactions denominated in non-U.S. currencies is primarily related to the Singapore dollar, Malaysian ringgit, British pound and euro. In addition, because the majority of our sales are denominated in the U.S. dollar, if one or more of our competitors sells to our customers in a different currency than the U.S. dollar, we are subject to the risk that the competitors’ products will be relatively less expensive than our products due to exchange rate effects. We have not historically established transaction-based hedging programs. Foreign currency exchange risks inherent in doing business in foreign countries could have a material adverse effect on our business, financial condition and results of operations.

15

Operational Risks

The manufacturing of our products is highly complex, and if we are not able to manage our manufacturing and procurement process effectively, our business, financial condition and results of operations may be materially adversely affected.

The manufacturing of our products is a highly complex process that involves the integration of multiple components and requires effective management of our supply chain while meeting our customers’ design-to-delivery cycle time requirements. Through the course of the manufacturing process, our customers may modify design and system configurations in response to changes in their own customers’ requirements. In order to rapidly respond to these modifications and deliver our products to our customers in a timely manner, we must effectively manage our manufacturing and procurement process. If we fail to manage this process effectively, we risk losing customers and damaging our reputation. We may also be subject to liability under our agreements with our customers if we or our suppliers fail to re- configure manufacturing processes or components in response to these modifications. In addition, if we acquire inventory in excess of demand or that does not meet customer specifications, we could incur excess or obsolete inventory charges. We have from time to time experienced bottlenecks and production difficulties that have caused delivery delays and quality control problems. These risks are even greater as we seek to expand our business into new subsystems. In addition, certain of our suppliers have been, and may in the future be, forced out of business as a result of the economic environment. In such cases, we may be required to procure products from higher-cost suppliers or, if no additional suppliers exist, reconfigure the design and manufacture of our products. This could materially limit our growth, adversely impact our ability to win future business and have a material adverse effect on our business, financial condition and results of operations.

Defects in our products could damage our reputation, decrease market acceptance of our products, and result in potentially costly litigation.

A number of factors, including design flaws, material and component failures, contamination in the manufacturing environment, impurities in the materials used and unknown sensitivities to process conditions, such as temperature and humidity, as well as equipment failures, may cause our products to contain undetected errors or defects. Errors, defects or other problems with our products may:

If any of our products contain defects or have reliability, quality or compatibility problems, our reputation may be damaged and customers may be reluctant to buy our products. We may also face a higher rate of product defects as we increase our production levels in periods of significant growth. Product defects could result in warranty and indemnification liability or the loss of existing customers or impair our ability to attract new customers. In addition, we may not find defects or failures in our products until after they are installed in a manufacturer’s fabrication facility. We may have to invest significant capital and other resources to correct these problems. Our current or potential customers also might seek to recover from us any losses resulting from defects or failures in our products. In addition, hazardous materials flow through and are controlled by certain of our products and an unintended release of these materials could result in serious injury or death. Liability claims could require us to spend significant time and money in litigation or pay significant damages.

We may incur unexpected warranty and performance guarantee claims that could materially adversely affect our business, financial condition and results of operations.

In connection with our products and services, we provide various product warranties, performance guarantees and indemnification rights. Warranty or other performance guarantee or indemnification claims against us could cause us to incur significant expense to repair or replace defective products or indemnify the affected customer for losses. In addition, quality issues can have various other ramifications, including delays in the recognition of sales, loss of sales, loss of future sales opportunities, increased costs associated with repairing or replacing products, and a negative impact on our reputation, all of which could materially adversely affect our business, financial condition and results of operations.

16

Our dependence on a limited number of suppliers may harm our production output and increase our costs, and may prevent us from delivering acceptable products on a timely basis.

Our ability to meet our customers’ demand for our products depends upon obtaining adequate supplies of quality components and other raw materials on a timely basis. In addition, our customers often specify components from particular suppliers that we must incorporate into our products. We also use consignment and just-in-time stocking programs, which means we carry very little inventory of components or other raw materials, and we rely on our suppliers to deliver necessary components and raw materials in a timely manner. However, our suppliers are under no obligation to provide us with components or other raw materials. As a result, the loss of or failure to perform by any of our key suppliers could materially adversely affect our ability to deliver products on a timely basis. In addition, if a supplier was unable to provide the volume of components we require on a timely basis and at acceptable prices and quality, we would have to identify and qualify replacements from alternative sources of supply. However, the process of qualifying new suppliers for complex components is also lengthy and could delay our production. We may also experience difficulty in obtaining sufficient supplies of components and raw materials in times of significant growth in our business. If we are unable to procure sufficient quantities of components or raw materials from suppliers, our customers may elect to delay or cancel existing orders or not place future orders, which could have a material adverse effect on our business, financial condition and results of operations.

We are subject to order and shipment uncertainties, and any significant reductions, cancellations or delays in customer orders could have a material adverse effect on our business, financial condition and results of operations.

Our sales are difficult to forecast because we generally do not have a material backlog of unfilled orders and because of the short time frame within which we are often required to manufacture and deliver products to our customers. Most of our sales for a particular quarter depend on customer orders placed during that quarter or shortly before it commences. Our contracts generally do not require our customers to commit to minimum purchase volumes. While most of our customers provide periodic rolling forecasts for product orders, those forecasts do not become binding until a formal purchase order is submitted, which generally occurs only a short time prior to shipment. As a result of the foregoing and the cyclicality and volatility of the industries we serve, it is difficult to predict future orders with precision. Occasionally, we order component inventory and build products in advance of the receipt of actual customer orders. Customers may cancel order forecasts, change production quantities from forecasted volumes or delay production for reasons beyond our control. Furthermore, reductions, cancellations or delays in customer order forecasts usually occur without penalty to, or compensation from, the customer. Reductions, cancellations or delays in forecasted orders could cause us to hold inventory longer than anticipated, which could reduce our gross profit, restrict our ability to fund our operations and result in unanticipated reductions or delays in sales. If we do not obtain orders as we anticipate, we could have excess components for a specific product and/or finished goods inventory that we would not be able to sell to another customer, likely resulting in inventory write-offs, which could have a material adverse effect on our business, financial condition and results of operations.

Because our customers generally require that they qualify our engineering, documentation, manufacturing and quality control procedures, our ability to add new customers quickly is limited.

We are generally required to qualify and maintain our status as a supplier for each of our customers. This is a time-consuming process that involves the inspection and approval by a customer of our engineering, documentation, manufacturing and quality control procedures before that customer will place orders with us. Our ability to lessen the adverse effect of any loss of, or reduction in sales to, an existing customer through the rapid addition of one or more new customers is limited in part because of these qualification requirements. Consequently, the risk that our business, financial condition and results of operations would be materially adversely affected by the loss of, or any reduction in orders by, any of our significant customers is increased. Moreover, if we lost our existing status as a qualified supplier to any of our customers, such customer could cancel its orders from us or otherwise terminate its relationship with us, which could have a material adverse effect on our business, financial condition and results of operations.

We may be subject to interruptions or failures in our information technology systems.

We rely on our information technology systems to process transactions, summarize our operating results and manage our business. Our information technology systems are subject to damage or interruption from power outages, computer and telecommunications failures, computer viruses, cyber-attack or other security breaches, catastrophic events, such as fires, floods, earthquakes, tornadoes, hurricanes, severe weather, acts of war or terrorism, and usage errors by our employees. If our information technology systems are damaged or cease to function properly, we may have to make a significant investment to fix or replace them, and we may suffer loss of critical data and interruptions or delays in our operations.

17

We may be the target of attempted cyber-attacks, computer viruses, malicious code, phishing attacks, denial of service attacks and other information security threats. To date, cyber-attacks have not had a material impact on our financial condition, results or business; however, we could suffer material financial or other losses in the future and we are not able to predict the severity of these attacks. Our risk and exposure to these matters remains heightened because of, among other things, the evolving nature of these threats, the current global economic and political environment, our prominent size and scale, the outsourcing of some of our business operations, the ongoing shortage of qualified cyber-security professionals, and the interconnectivity and interdependence of third parties to our systems. The occurrence of a cyber-attack, breach, unauthorized access, misuse, computer virus or other malicious code or other cyber-security event could jeopardize or result in the unauthorized disclosure, gathering, monitoring, misuse, corruption, loss or destruction of confidential and other information that belongs to us, our customers, our counterparties, third-party service providers or borrowers that is processed and stored in, and transmitted through, our computer systems and networks. The occurrence of such an event could also result in damage to our software, computers or systems, or otherwise cause interruptions or malfunctions in our, our customers’, our counterparties’ or third parties’ operations. This could result in significant losses, loss of customers and business opportunities, reputational damage, litigation, regulatory fines, penalties or intervention, reimbursement or other compensatory costs, or otherwise adversely affect our business, financial condition or results of operations.

The reliability and capacity of our information technology systems is critical to our operations and the implementation of our growth initiatives. Any material disruption in our information technology systems, or delays or difficulties in implementing or integrating new systems or enhancing current systems, could have an adverse effect on our business, and results of operations.

Certain of our customers require that we consult with them in connection with specified fundamental changes in our business, and address any concerns or requests such customer may have in connection with a fundamental change.

Certain of our key customers require that we consult with them in connection with specified fundamental changes in our business, including, among other things:

These customers do not have contractual approval or veto rights with respect to any fundamental changes in our business. However, our failure to consult with such customers or to satisfactorily respond to their requests in connection with any such fundamental change could constitute a breach of contract or otherwise be detrimental to our relationships with such customers, which could have a material adverse effect on our business, financial condition and results of operations.

Our business is largely dependent on the know-how of our employees, and we generally do not have an intellectual property position that is protected by patents.

We believe that the success of our business depends in part on our proprietary technology, information, processes and know-how and on our ability to operate without infringing on the proprietary rights of third parties. We rely on a combination of trade secrets and contractual confidentiality provisions and, to a much lesser extent, patents, copyrights and trademarks to protect our proprietary rights. Accordingly, our intellectual property position is more vulnerable than it would be if it were protected primarily by patents. We cannot assure you that we have adequately protected or will be able to adequately protect our technology, that our competitors will not be able to utilize our existing technology or develop similar technology independently, that the claims allowed with respect to any patents held by us will be broad enough to protect our technology or that foreign intellectual property laws will adequately protect our intellectual property rights. If we fail to protect our proprietary rights successfully, our competitive position could suffer. Any future litigation to enforce patents issued to us, to protect trade secrets or know-how possessed by us or to defend ourselves or to indemnify others against claimed infringement of the rights of others could have a material adverse effect on our business, financial condition and results of operations.

18

The technology labor market is very competitive, and our business will suffer if we are unable to hire and retain key personnel.

Our future success depends in part on the continued service of our key executive officers, as well as our research, engineering, sales and manufacturing personnel, most of whom are not subject to employment or non-competition agreements. Competition for qualified personnel in the technology industry is particularly intense, and we operate in geographic locations in which labor markets are competitive. Our management team has significant industry experience and deep customer relationships, and therefore would be difficult to replace. In addition, our business is dependent to a significant degree on the expertise and relationships which only a limited number of engineers possess. Many of these engineers often work at our customers’ sites and serve as an extension of our customers’ product design teams. The loss of any of our key executive officers or key engineers and other personnel, including our engineers working at our customers’ sites, or the failure to attract additional personnel as needed, could have a material adverse effect on our business, financial condition and results of operations and could lead to higher labor costs, the use of less-qualified personnel and the loss of customers. In addition, if any of our key executive officers or other key employees were to join a competitor or form a competing company, we could lose customers, suppliers, know-how and key personnel.

We do not maintain key-man life insurance with respect to any of our employees. Our business will suffer if we are unable to attract, employ and retain highly skilled personnel.

Labor disruptions could materially adversely affect our business, financial condition and results of operations.

As of December 31, 2021, we had approximately 1,850 full time employees and 690 contract or temporary workers worldwide. None of our employees are unionized, but in various countries, local law requires our participation in works councils. While we have not experienced any material work stoppages at any of our facilities, any stoppage or slowdown could cause material interruptions in manufacturing, and we cannot assure you that alternate qualified capacity would be available on a timely basis, or at all. As a result, labor disruptions at any of our facilities could materially adversely affect our business, financial condition and results of operations.

Our business is subject to the risks of severe weather, earthquakes, fire, power outages, floods, and other catastrophic events, including weather events resulting from climate change, and to interruption by man-made disruptions, such as terrorism.

Our facilities could be subject to a catastrophic loss caused by natural disasters, including severe weather, fires, earthquakes or other events, including a terrorist attack, a pandemic, epidemic or outbreak of a disease (including COVID‑19). Increasing concentrations of greenhouse gasses in the Earth’s atmosphere and climate change may produce significant physical effects on weather conditions, such as increased frequency and severity of droughts, storms, floods, and other climatic events. While we maintain disaster recovery plans, they might not adequately protect us. Despite any precautions we take for natural disasters or other catastrophic events, these events, including terrorist attack, a pandemic, epidemic or outbreak of a disease (including COVID‑19), hurricanes, fire, floods and ice and snow storms, could result in damage to and closure of our or our customers’ facilities or the infrastructure on which such facilities rely. Additionally, it could delay production and shipments, reduce sales, result in large expenses to repair or replace the facility and we may experience extended power outages at our facilities. Disruption in supply resulting from natural disasters or other causalities or catastrophic events may result in certain of our suppliers being unable to deliver sufficient quantities of components or raw materials at all or in a timely manner, disruptions in our operations or disruptions in our customers’ operations. Although we carry business interruption insurance policies and typically have provisions in our contracts that protect us in certain events, our coverage might not be adequate to compensate us for all losses that may occur. To the extent that natural disasters or other calamities or causalities should result in delays or cancellations of customer orders, or the delay in the manufacture or shipment of our products, our business, financial condition and results of operations would be adversely affected.

19

Legal and Regulatory Risks

Our business is subject to a variety of U.S. and international laws, rules, policies, and other obligations regarding privacy, data protection, and other matters.

We are subject to federal, state, and international laws relating to the collection, use, retention, security, and transfer of customer, employee, and business partner personally identifiable information (“PII”), including the European Union’s General Data Protection Regulation (“GDPR”), which came into effect in May 2018 and the California Consumer Privacy Act (“CCPA”), which came into effect on January 1, 2020. In many cases, these laws apply not only to third-party transactions, but also to transfers of information between one company and its subsidiaries, and among the subsidiaries and other parties with which we have commercial relations. The introduction of new products or expansion of our activities in certain jurisdictions may subject us to additional laws and regulations. Foreign data protection, privacy, and other laws and regulations, including GDPR, can be more restrictive than those in the United States. These U.S. federal and state and foreign laws and regulations, including GDPR, which can be enforced by private parties or government entities, are constantly evolving and can be subject to significant change. In addition, the application and interpretation of these laws and regulations, including GDPR, are often uncertain, particularly in the new and rapidly evolving industry in which we operate, and may be interpreted and applied inconsistently from country to country and inconsistently with our current policies and practices. These existing and proposed laws and regulations can be costly to comply with and can delay or impede the development of new products, result in negative publicity, increase our operating costs, require significant management time and attention, and subject us to inquiries or investigations, claims or other remedies, including fines, which may be significant, or demands that we modify or cease existing business practices.

A failure by us, our suppliers, or other parties with whom we do business to comply with posted privacy policies or with other federal, state, or international privacy-related or data protection laws and regulations, including GDPR and CCPA, could result in proceedings against us by governmental entities or others, which could have a material adverse effect on our business, results of operations, and financial condition.

Third parties have claimed and may in the future claim we are infringing their intellectual property, which could subject us to litigation or licensing expenses, and we may be prevented from selling our products if any such claims prove successful.

We may in the future receive claims that our products, processes or technologies infringe the patents or other proprietary rights of third parties. In addition, we may be unaware of intellectual property rights of others that may be applicable to our products. Any litigation regarding our patents or other intellectual property could be costly and time-consuming and divert our management and key personnel from our business operations, any of which could have a material adverse effect on our business, financial condition and results of operations. The complexity of the technology involved in our products and the uncertainty of intellectual property litigation increase these risks. Claims of intellectual property infringement may also require us to enter into costly license agreements. However, we may not be able to obtain licenses on terms acceptable to us, or at all. We also may be subject to significant damages or injunctions against the development, manufacture and sale of certain of our products if any such claims prove successful. We also rely on design specifications and other intellectual property of our customers in the manufacture of products for such customers. While our customer agreements generally provide for indemnification of us by a customer if we are subjected to litigation for third-party claims of infringement of such customer’s intellectual property, such indemnification provisions may not be sufficient to fully protect us from such claims, or our customers may breach such indemnification obligations to us, which could result in costly litigation to defend against such claims or enforce our contractual rights to such indemnification.

From time to time, we may become involved in other litigation and regulatory proceedings, which could require significant attention from our management and result in significant expense to us and disruptions in our business.

In addition to any litigation related to our intellectual property rights, we may in the future be named as a defendant from time to time in other lawsuits and regulatory actions relating to our business, such as commercial contract claims, employment claims and tax examinations, some of which may claim significant damages or cause us reputational harm. Due to the inherent uncertainties of litigation and regulatory proceedings, we cannot predict the ultimate outcome of any such proceeding. An unfavorable outcome could have a material adverse effect on our business, financial condition and results of operations or limit our ability to engage in certain of our business activities. In addition, regardless of the outcome of any litigation or regulatory proceeding, such proceedings are often expensive, time-consuming and disruptive to normal business operations and require significant attention from our management. As a result, any such lawsuits or proceedings could materially adversely affect our business, financial condition and results of operations.

20

As a global company, we are subject to the risks of doing business internationally, including periodic foreign economic downturns and political instability, which may adversely affect our sales and cost of doing business in those regions of the world.

Foreign economic downturns have adversely affected our business and results of operations in the past and could adversely affect our business and results of operations in the future. In addition, other factors relating to the operation of our business outside of the United States may have a material adverse effect on our business, financial condition and results of operations in the future, including:

In the future, we may seek to expand our presence in certain foreign markets or enter emerging markets. Evaluating or entering into an emerging market may require considerable management time, as well as start-up expenses for market development before any significant sales and earnings are generated. Operations in new foreign markets may achieve low margins or may be unprofitable, and expansion in existing markets may be affected by local political, economic and market conditions. As we continue to operate our business globally, our success will depend, in part, on our ability to anticipate and effectively manage these and the other risks noted above. The impact of any one or more of these factors could materially adversely affect our business, financial condition and results of operations.

Changes in U.S. trade policy, tariffs, and import/export regulations may have a material adverse effect on our business, financial condition and results of operations.

Our international operations and transactions also depend upon favorable trade relations between the United States and the foreign countries in which our customers and suppliers have operations. Changes in U.S. or international social, political, regulatory and economic conditions or in laws and policies governing foreign trade, manufacturing, development and investment in the territories or countries where we currently sell our products or conduct our business, as well as any negative sentiment toward the U.S. as a result of such changes, could adversely affect our business. Legislators in the U.S. may institute or propose changes in trade policies that include the negotiation or termination of trade agreements, the imposition of higher tariffs on imports into the U.S., economic sanctions on individuals, corporations or countries, and other government regulations affecting trade between the U.S. and other countries where we conduct our business. It may be time-consuming and expensive for us to alter our business operations in order to adapt to or comply with any such changes.

As a result of recent trade policy changes in the U.S., there may be greater restrictions and economic disincentives on international trade. The recent tariffs and other changes in U.S. trade policy could trigger retaliatory actions by affected countries, and certain foreign governments have instituted or are considering imposing trade sanctions on certain U.S. goods. We do a significant amount of business that would be impacted by changes to the trade policies of the U.S. and foreign countries (including governmental action related to tariffs, international trade agreements, or economic sanctions). Such changes have the potential to adversely impact the U.S. economy or certain sectors thereof, our industry and the global demand for our products. We may not succeed in developing and implementing policies and strategies to counter the foregoing factors effectively in each location where we do business and the foregoing factors may cause a reduction in our sales, profitability or cash flows, or cause an increase in our liabilities.

21

We are subject to numerous environmental laws and regulations, including laws and regulations addressing climate change, which could require us to incur environmental liabilities, increase our manufacturing and related compliance costs or otherwise adversely affect our business.

We are subject to a variety of federal, state, local and foreign laws and regulations governing the protection of the environment or addressing climate change. These environmental laws and regulations include those relating to the use, storage, handling, discharge, emission, disposal and reporting of toxic, volatile or otherwise hazardous materials used in our manufacturing processes. These materials may have been or could be released into the environment at properties currently or previously owned or operated by us, at other locations during the transport of materials or at properties to which we send substances for treatment or disposal. In addition, we may not be aware of all environmental laws or regulations that could subject us to liability in the United States or internationally. If we were to violate or become liable under environmental laws and regulations or become non-compliant with permits required at some of our facilities, we could be held financially responsible and incur substantial costs, including cleanup costs, fines and civil or criminal sanctions, third-party property damage or personal injury claims. Concern over climate change may result in new or increased legal and regulatory requirements to reduce or mitigate the effects of climate change. Increased costs of energy or compliance with emissions standards due to legal or regulatory requirements related to climate change may cause disruptions in or increased costs associated with manufacturing our products.

Failure to maintain effective internal controls in accordance with Section 404 of the Sarbanes-Oxley Act could have a material adverse effect on our business and stock price.

As a publicly traded company, we are required to comply with the SEC’s rules implementing Section 302 and 404 of the Sarbanes‑Oxley Act, which require management to certify financial and other information in our quarterly and annual reports and provide an annual management report on the effectiveness of controls over financial reporting. Because we are no longer an emerging growth company, our independent registered public accounting firm is required to attest to the effectiveness of our internal control over financial reporting under Section 404(b) of the Sarbanes‑Oxley Act. Accordingly, we may incur additional costs to comply with Section 404(b).

If we identify weaknesses in our internal control over financial reporting, are unable to comply with the requirements of Section 404 in a timely manner or to assert that our internal control over financial reporting is effective, or if our independent registered public accounting firm is unable to express an unqualified opinion as to the effectiveness of our internal control over financial reporting, investors may lose confidence in the accuracy and completeness of our financial reports and the market price of our common stock could be negatively affected, and we could become subject to investigations by NASDAQ, the SEC or other regulatory authorities, which could require additional financial and management resources.

We previously identified material weaknesses in our internal control over financial reporting, and if we fail to maintain an effective system of internal controls, disclosure controls, and procedures, we may not be able to accurately report our financial results, prevent fraud, or file our periodic reports in a timely manner, which may cause investors to lose confidence in our reported financial information and may lead to a decline in our share price.

In 2021, we identified material weaknesses related to ineffective information technology general controls (“ITGCs”) in the areas of user access and program change management over certain information technology systems (“IT Systems”) that support our financial reporting processes. For a detailed summary of these material weaknesses, including our remediation steps, please refer to Item 9A – Controls and Procedures. In addition, we have identified material weaknesses in our internal controls over financial reporting in prior years. If we are unable to maintain effective internal control over financial reporting or disclosure controls and procedures, our ability to record, process, and report financial information accurately and to prepare financial statements within required time periods could be adversely affected, which could subject us to litigation, investigations, or penalties; negatively affect our liquidity, our access to capital markets, perceptions of our creditworthiness, our ability to complete acquisitions, our ability to maintain compliance with covenants under our debt instruments or derivative arrangements regarding the timely filing of periodic reports, or investor confidence in our financial reporting, any of which may divert management resources or cause our stock price to decline. Further, remediation of a material weakness does not provide assurance that our remediation or other controls will continue to operate properly or remain adequate.

22

There are limitations on the effectiveness of controls, and the failure of our control systems may materially and adversely impact us.

We do not expect that disclosure controls or internal controls over financial reporting will prevent all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Further, the design of a control system must reflect the fact that there are resource constraints and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, have been detected. Failure of our control systems to prevent error or fraud could have a material adverse effect on our business, financial condition and results of operations.

Compliance with SEC rules relating to “conflict minerals” may require us and our suppliers to incur substantial expense and may result in disclosure by us that certain minerals used in products we manufacture are not “DRC conflict free.”

Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act, or the Dodd-Frank Act, required the SEC to promulgate rules requiring disclosure by a public company of any “conflict minerals” (tin, tungsten, tantalum and gold) necessary to the functionality or production of a product manufactured or contracted to be manufactured by such company. The SEC adopted final rules in 2012 which took effect at the end of January 2013. Because we manufacture products which may contain tin, tungsten, tantalum or gold, we are required under these rules to determine whether those minerals are necessary to the functionality or production of our products and, if so, conduct a country of origin inquiry with respect to all such minerals. If any such minerals may have originated in the Democratic Republic of the Congo, or the DRC, or any of its adjoining countries, or the “covered countries,” then we and our suppliers must conduct diligence on the source and chain of custody of the conflict minerals to determine if they did originate in one of the covered countries and, if so, whether they financed or benefited armed groups in the covered countries. Disclosures relating to the products which may contain conflict minerals, the country of origin of those minerals and whether they are “DRC conflict free” must be provided in a Form SD (and accompanying conflict minerals report if one is required to disclose the diligence undertaken by us in sourcing the minerals and our conclusions relating to such diligence). If we are required to submit a conflict minerals report, that report must be audited by an independent auditor pursuant to existing government auditing standards, unless (for the first two years) we are unable to determine whether the minerals are “DRC conflict free.” Compliance with this disclosure rule may be very time consuming for management and our supply chain personnel (as well as time consuming for our suppliers) and could involve the expenditure of significant amounts of money and resources by us and them. Disclosures by us mandated by the rules which are perceived by the market to be “negative” may cause customers to refuse to purchase our products. We are currently unable to assess the cost of compliance with this rule, and we cannot assure you that such cost will not have a material adverse effect on our business, financial condition and results of operations.

Changes in tax laws, tax rates or tax assets and liabilities could materially adversely affect our financial condition and results of operations.

As a global company, we are subject to taxation in the United States and various other countries. Significant judgment is required to determine and estimate worldwide tax liabilities. Our future annual and quarterly tax rates could be affected by numerous factors, including changes in applicable tax laws, the amount and composition of pre-tax income in countries with differing tax rates or valuation of our deferred tax assets and liabilities. We have significant operations in the United States and our holding company structure includes entities organized in the Cayman Islands, Netherlands, Singapore and Scotland. As a result, changes in applicable tax laws in these jurisdictions could have a material adverse effect on our financial condition and results of operations.

We are also subject to regular examination by the Internal Revenue Service and other tax authorities, and from time to time we initiate amendments to previously filed tax returns. We regularly assess the likelihood of favorable or unfavorable outcomes resulting from these examinations and amendments to determine the adequacy of our provision for income taxes, which requires estimates and judgments. Although we believe our tax estimates are reasonable, we cannot assure you that the tax authorities will agree with such estimates. We may have to engage in litigation to achieve the results reflected in the estimates, which may be time- consuming and expensive. We cannot assure you that we will be successful or that any final determination will not be materially different from the treatment reflected in our historical income tax provisions and accruals, which could materially and adversely affect our financial condition and results of operations.

23

Liquidity and Capital Resources Risks

Restrictive covenants under our credit facilities may limit our current and future operations. If we fail to comply with those covenants, the lenders could cause outstanding amounts, which are currently substantial, to become immediately due and payable, and we might not have sufficient funds and assets to pay such loans.

As of December 31, 2021, we had total principal outstanding of $150.0 million under our term loan facility and $145.0 million under our revolving credit facility (collectively “credit facilities”). We may incur additional indebtedness in the future. Our credit facilities contain certain restrictive covenants and conditions, including limitations on our ability to, among other things:

As a result of these covenants, we may be restricted in our ability to pursue new business opportunities or strategies or to respond quickly to changes in the industries that we serve. A violation of any of these covenants would be deemed an event of default under our credit facilities. In such event, upon the election of the lenders, the loan commitments under our credit facilities would terminate and the principal amount of the loans and accrued interest then outstanding would be due and payable immediately. A default may also result in the acceleration of any other debt to which a cross-acceleration or cross-default provision applies. In the event our lenders accelerate the repayment of our borrowings, we cannot assure you that we and our subsidiaries would have sufficient funds to repay such indebtedness or be able to obtain replacement financing on a timely basis or at all. These events could force us into bankruptcy or liquidation, which could have a material adverse effect on our business, financial condition and results of operations.

We also may need to negotiate changes to the covenants in the agreements governing our credit facilities in the future if there are material changes in our business, financial condition or results of operations, but we cannot assure you that we will be able to do so on terms favorable to us or at all.

We may not be able to generate sufficient cash to service all of our indebtedness, including under our credit facilities, and may be forced to take other actions to satisfy our obligations under our indebtedness, which may not be successful.

Our ability to make scheduled payments on or to refinance our indebtedness, including under our credit facilities, depends on our financial condition and results of operations, which are subject to prevailing economic and competitive conditions and other factors beyond our control. We may be unable to maintain a level of cash flows from operating activities sufficient to permit us to fund our day-to-day operations or to pay the principal, premium, if any, and interest on our indebtedness. If our cash flows and capital resources are insufficient to fund our debt service obligations, we could face substantial liquidity problems and could be forced to reduce or delay investments and capital expenditures or to sell assets or operations, seek additional capital or restructure or refinance our indebtedness. If we cannot make scheduled payments on our debt, we will be in default and, as a result, the lenders under our credit facilities could terminate their commitments to loan money, or foreclose against the assets securing such borrowings, and we could be forced into bankruptcy or liquidation, in each case, which would have a material adverse effect on our business, financial condition and results of operations.

Ordinary Share Ownership Risks

Our quarterly sales and operating results fluctuate significantly from period to period, and this may cause volatility in our share price.

Our quarterly sales and operating results have fluctuated significantly in the past, and we expect them to continue to fluctuate in the future for a variety of reasons, including the following:

24

As a result of the foregoing, we believe that quarter-to-quarter comparisons of our sales and results of operations may not be meaningful and that these comparisons may not be an accurate indicator of our future performance. Changes in the timing or terms of a small number of transactions could disproportionately affect our results of operations in any particular quarter. Moreover, our results of operations in one or more future quarters may fail to meet our guidance or the expectations of securities analysts or investors. If this occurs, we would expect to experience an immediate and significant decline in the trading price of our ordinary shares.

The price of our ordinary shares may fluctuate substantially.

You should consider an investment in our ordinary shares to be risky, and you should invest in our ordinary shares only if you can withstand a significant loss and wide fluctuations in the market value of your investment. Some factors that may cause the market price of our ordinary shares to fluctuate, in addition to the other risks mentioned in this report, are:

In addition, if the market for stocks in our industry or industries related to our industry, or the stock market in general, experiences a loss of investor confidence, the trading price of our ordinary shares could decline for reasons unrelated to our business, financial condition and results of operations. If any of the foregoing occurs, it could cause our share price to fall and may expose us to lawsuits that, even if unsuccessful, could be costly to defend and a distraction to management.

25

Future sales of our ordinary shares, or the perception in the public markets that these sales may occur, may depress our share price.

We may seek to raise additional capital from time to time in the future, which may involve the issuance of additional ordinary shares, or securities convertible into ordinary shares. Sales of substantial amounts of our ordinary shares in the public market, or the perception that these sales could occur, could adversely affect the price of our ordinary shares and could impair our ability to raise capital through the sale of additional shares.

Our articles of association contain anti-takeover provisions that could adversely affect the rights of our shareholders.

Our articles of association contain provisions to limit the ability of others to acquire control of our company or cause us to engage in change-of control transactions, including, among other things:

These provisions could have the effect of depriving our shareholders of an opportunity to sell their shares at a premium over prevailing market prices by discouraging third parties from seeking to obtain control of our company in a tender offer or similar transaction. With our staggered Board of Directors, at least two annual meetings of shareholders are generally required in order to effect a change in a majority of our directors. Our staggered Board of Directors can discourage proxy contests for the election of our directors and purchases of substantial blocks of our shares by making it more difficult for a potential acquirer to gain control of our Board of Directors in a relatively short period of time.

The issuance of preferred shares could adversely affect holders of ordinary shares.

Our Board of Directors is authorized to issue preferred shares without any action on the part of holders of our ordinary shares. Our Board of Directors also has the power, without shareholder approval, to set the terms of any such preferred shares that may be issued, including voting rights, dividend rights, and preferences over our ordinary shares with respect to dividends or if we liquidate, dissolve or wind up our business and other terms. If we issue preferred shares in the future that have preference over our ordinary shares with respect to the payment of dividends or upon our liquidation, dissolution or winding up, or if we issue preferred shares with voting rights that dilute the voting power of our ordinary shares, the rights of holders of our ordinary shares or the price of our ordinary shares could be adversely affected.

Our shareholders may face difficulties in protecting their interests as a shareholder, as Cayman Islands law provides substantially less protection when compared to the laws of the United States.

Our corporate affairs are governed by our amended and restated memorandum and articles of association and by the Companies Law (2013 Revision) and common law of the Cayman Islands. The rights of shareholders to take legal action against our directors and us, actions by minority shareholders and the fiduciary responsibilities of our directors to us under Cayman Islands law are to a large extent governed by the common law of the Cayman Islands. The common law of the Cayman Islands is derived in part from comparatively limited judicial precedent in the Cayman Islands as well as from English common law, which has persuasive, but not binding, authority on a court in the Cayman Islands. The rights of our shareholders and the fiduciary responsibilities of our directors under Cayman Islands law are not as clearly established as they would be under statutes or judicial precedents in the United States. In particular, the Cayman Islands have a less exhaustive body of securities laws as compared to the United States. In addition, Cayman Islands companies may not have standing to initiate a shareholder derivative action before the United States federal courts.

As a result of all of the above, our shareholders may have more difficulty in protecting their interests through actions against us or our officers, directors or major shareholders than would shareholders of a corporation incorporated in a jurisdiction in the United States.

26

Certain judgments obtained against us by our shareholders may not be enforceable.

We are a Cayman Islands company and a portion our assets are located outside of the United States. As a result, it may be difficult or impossible for you to bring an action against us in the United States in the event that you believe that your rights have been infringed under U.S. federal securities laws or otherwise. Even if you are successful in bringing an action of this kind, the laws of the Cayman Islands may render you unable to enforce a judgment against our assets. There is no statutory recognition in the Cayman Islands of judgments obtained in the United States, although the courts of the Cayman Islands will generally recognize and enforce a non-penal judgment of a foreign court of competent jurisdiction without retrial on the merits.

There can be no assurance that we will not be a passive foreign investment company for any taxable year, which could result in adverse U.S. federal income tax consequences to U.S. Holders of our ordinary shares.

A non-U.S. corporation will be a passive foreign investment company, or PFIC, for any taxable year if either (i) at least 75% of its gross income for such year is passive income or (ii) at least 50% of the value of its assets (generally based on an average of the quarterly values of the assets) during such year is attributable to assets that produce or are held for the production of passive income. Our PFIC status for any taxable year can be determined only after the close of that year.

Based on the value of our assets and the composition of our income and assets, we do not believe we were treated as a PFIC for U.S. federal income purposes for our taxable year ended December 31, 2021. The determination of PFIC status is based on an annual determination that cannot be made until the close of a taxable year, involves extensive factual investigation, including ascertaining the fair market value of all of our assets on a quarterly basis and the character of each item of income that we earn, and is subject to uncertainty in several respects. Accordingly, we cannot assure you that we were not treated as a PFIC for our taxable year ended December 31, 2021 or any prior taxable year, that we will not be treated as a PFIC for the current or any future taxable year or that the IRS will not take a position contrary to any position that we take.

If we are a PFIC for any taxable year during which a U.S. person holds ordinary shares, certain adverse U.S. federal income tax consequences could apply to such U.S. person. You are strongly urged to consult your tax advisors as to whether or not we will be a PFIC and the consequences of such status on an investment in our shares in your particular circumstances.

If a U.S. person is treated as owning at least 10% of our shares, such person may be subject to adverse U.S. federal income tax consequences.

If a U.S. person is treated as owning (directly, indirectly, or constructively) at least 10% of the value or voting power of our shares, such person may be treated as a “United States shareholder” with respect to each “controlled foreign corporation” in our group (if any). Because our group includes one or more U.S. subsidiaries, in certain circumstances we could be treated as a controlled foreign corporation and/or certain of our non-U.S. subsidiaries could be treated as controlled foreign corporations (regardless of whether we are or are not treated as a controlled foreign corporation).

A United States shareholder of a controlled foreign corporation may be required to annually report and include in its U.S. taxable income its pro rata share of “Subpart F income,” “global intangible low-taxed income” and investments in United States property by controlled foreign corporations, whether or not we make any distributions. An individual that is a United States shareholder with respect to a controlled foreign corporation generally would not be allowed certain tax deductions or foreign tax credits that would be allowed to a United States shareholder that is a U.S. corporation. A failure to comply with these reporting obligations may subject a United States shareholder to significant monetary penalties and may prevent starting of the statute of limitations with respect to such shareholder’s U.S. federal income tax return for the year for which reporting was due. We do not intend to monitor whether we are or any of our current or future non-U.S. subsidiaries is treated as a controlled foreign corporation or whether any investor is treated as a United States shareholder with respect to us or any of our controlled foreign corporation subsidiaries. In addition, we cannot provide assurances that we will furnish to any United States shareholders information that may be necessary to comply with the aforementioned reporting and tax paying obligations.

A U.S. investor should consult its tax advisors regarding the potential application of these rules to an investment in our shares in its particular circumstances.

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

ITEM 2. PROPERTIES

Our principal executive office is located at 3185 Laurelview Ct., Fremont, California 94538. As of December 31, 2021, our principal manufacturing and administrative facilities, including our executive offices, are comprised of approximately 753,200 square feet. All

27

of our facilities are leased, which allows for flexibility as business conditions and geographic demand change. The table below sets forth the approximate square footage of each of our facilities.

We do not anticipate difficulty in either retaining occupancy of any of our facilities through lease renewals prior to expiration or through month-to-month occupancy or replacing them with equivalent facilities. We believe that our existing facilities and equipment are well maintained, in good operating condition, and are adequate to meet our currently anticipated requirements.

ITEM 3. LEGAL PROCEEDINGS

We may be subject to various legal claims and proceedings which arise in the ordinary course of our business involving claims incidental to our business, including employment-related claims.

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

PART II

ITEM 5. MARKET FOR THE REGISTRANT’S COMMON EQUITY, RELATED SHAREHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Holders of Record

As of February 22, 2022, all of our issued ordinary shares were held in “nominee” or “street” name or in our treasury account.

Dividends

We do not anticipate that we will pay any cash dividends on our ordinary shares for the foreseeable future. Any determination to pay dividends in the future will be at the discretion of our Board of Directors and will depend upon our financial condition, results of operations, contractual restrictions (including those under our credit facilities and any potential indebtedness we may incur in the future), restrictions imposed by applicable law, tax considerations, and other factors our Board of Directors deems relevant.

28

Stock Performance Graph

The information included under the heading Item 5 – Stock Performance Graph is “furnished” and not “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), or otherwise subject to the liabilities of that section, nor shall it be deemed to be “soliciting material” subject to Regulation 14A or incorporated by reference in any filing under the Securities Act or the Exchange Act.

Our ordinary shares are listed for trading on the NASDAQ under the symbol “ICHR.” The Stock Price Performance Graph set forth below plots the cumulative total shareholder return on a quarterly basis of our ordinary shares from December 9, 2016, the date on which our shares began trading, through December 31, 2021, with the cumulative total return of the Nasdaq Composite Index and the PHLX Semiconductor Sector Index over the same period. The comparison assumes $100 was invested on December 9, 2016 in the ordinary shares of Ichor Holdings, Ltd., in the Nasdaq Composite Index, and in the PHLX Semiconductor Sector Index and assumes reinvestment of dividends, if any.

The stock price performance shown on the graph above is not necessarily indicative of future price performance. Information used in the graph was obtained from the Nasdaq Stock Market, a source believed to be reliable, but we are not responsible for any errors or omissions in such information.

ITEM 6. [RESERVED]

29

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

You should read the following discussion and analysis of our financial condition and results of operations in conjunction with our consolidated financial statements and related notes included elsewhere in this report. The following discussion contains forward-looking statements based upon our current plans, expectations and beliefs that involve risks and uncertainties. Our actual results may differ materially from those anticipated in these forward-looking statements. Factors that could cause or contribute to these differences include those discussed below and elsewhere in this report, particularly in the section entitled Item 1A – Risk Factors. For a comparison of our financial condition, results of operations, and cash flows for 2020 to 2019, refer to Part II, Item 7 in our 2020 Annual Report on Form 10‑K, which was filed with the Securities and Exchange Commission on March 5, 2021.

Overview

We are a leader in the design, engineering, and manufacturing of critical fluid delivery subsystems and components for semiconductor capital equipment. Our product offerings include gas and chemical delivery systems and subsystems, collectively known as fluid delivery systems and subsystems, which are key elements of the process tools used in the manufacturing of semiconductor devices. Our gas delivery subsystems deliver, monitor, and control precise quantities of the specialized gases used in semiconductor manufacturing processes such as etch and deposition. Our chemical delivery systems and subsystems precisely blend and dispense the reactive liquid chemistries used in semiconductor manufacturing processes such as chemical-mechanical planarization, electroplating, and cleaning. We also provide precision-machined components, weldments, e‑beam and laser-welded components, precision vacuum and hydrogen brazing and surface treatment technologies, and other proprietary products. This vertically integrated portion of our business is primarily focused on metal and plastic parts that are used in gas and chemical systems, respectively.

Fluid delivery subsystems ensure accurate measurement and uniform delivery of specialty gases and chemicals at critical steps in the semiconductor manufacturing processes. Any malfunction or material degradation in fluid delivery reduces yields and increases the likelihood of manufacturing defects in these processes. Most OEMs outsource all or a portion of the design, engineering, and manufacturing of their gas delivery subsystems to a few specialized suppliers, including us. Additionally, many OEMs are outsourcing the design, engineering, and manufacturing of their chemical delivery subsystems due to the increased fluid expertise required to manufacture these subsystems. Outsourcing these subsystems has allowed OEMs to leverage the suppliers’ highly specialized engineering, design, and production skills while focusing their internal resources on their own value-added processes. We believe that this outsourcing trend has enabled OEMs to reduce their costs and development time, as well as provide growth opportunities for specialized subsystems suppliers like us.

We have a global footprint with production facilities in California, Minnesota, Oregon, Texas, Singapore, Malaysia, the United Kingdom, Korea, and Mexico.

The following table summarizes key financial information for the periods indicated. Amounts are presented in accordance with GAAP unless explicitly identified as being a non-GAAP metric. For a description of our non-GAAP metrics and reconciliations to the most comparable GAAP metrics, please refer to Item 7 – Management’s Discussion and Analysis of Financial Condition and Results of Operations – Non-GAAP Financial Results within this Annual Report.

30

Key Factors Affecting Our Business

Investment in Semiconductor Manufacturing Equipment

The design and manufacturing of semiconductor devices is constantly evolving and becoming more complex in order to achieve greater performance and efficiency. To keep pace with these changes, OEMs need to refine their existing products and invest in developing new products. In addition, semiconductor device manufacturers will continue to invest in new wafer fabrication equipment to expand their production capacity and to support new manufacturing processes.

Outsourcing of Subsystems by Semiconductor OEMs

Faced with increasing manufacturing complexities, more complex subsystems, shorter product lead times, shorter industry spend cycles, and significant capital requirements, outsourcing of subsystems and components by OEMs has continued to grow. In the past two decades, OEMs have outsourced most of their gas delivery systems to suppliers such as us. OEMs have also started to outsource their chemical delivery systems in recent years. Our results will be affected by the degree to which outsourcing of these fluid delivery systems by OEMs continues to grow.

Cyclicality of Semiconductor Capital Equipment Industry

Our business is subject to the cyclicality of the capital expenditures of the semiconductor industry, which drives cyclicality in the semiconductor capital equipment industry in which we operate. In 2021, we derived over 95% of our sales from the semiconductor capital equipment industry. Demand for semiconductor capital equipment can fluctuate significantly based on changes in general economic conditions, including consumer spending, demand for semiconductor products, pricing, and other factors. In the past, these fluctuations have resulted in significant variations in the levels of spending within the semiconductor capital equipment industry, and as a result, our results of operations. The cyclicality of the semiconductor industry will continue to impact our results of operations in the future.

Customer Concentration

The number of capital equipment manufacturers for the semiconductor device industry is significantly consolidated, resulting in a small number of large manufacturers. Our customers are a significant component of this consolidation, resulting in our sales being concentrated in a few customers. In 2021, our top two customers were Lam Research and Applied Material, accounting for approximately 53% and 32% of sales, respectively. Our customers often require reduced prices or other pricing, quality, or delivery commitments as a condition to their purchasing from us in any given period or increasing their purchase volume, which can, among other things, result in reduced gross margins in order to maintain or expand our market share. Although we do not have any long-term contracts that require customers to place orders with us, Lam Research and Applied Materials have been our customers for over a decade.

Acquisitions

In November 2021, we acquired IMG, and California-based leader in precision machining and specialty joining and plating, for approximately $270.0 million. Between 2017 and 2020, we engaged in four separate business combinations for a combined investment of approximately $200.0 million. These acquisitions continue to have a significant impact on our financial position and results of operations. We intend to continue to evaluate opportunistic acquisitions to supplement our organic growth, and any such acquisitions could have a material impact on our business and results of operations.

COVID‑19 Pandemic and Global Supply Chain

The COVID‑19 pandemic and related economic repercussions have created, and are expected to continue to create, significant volatility, uncertainty, and turmoil in our industry. While our facilities are currently not subject to any site-wide government shutdowns, in June 2021, the Malaysian government instituted an Enhanced Movement Control Order (“EMCO”), which impacted our weldment facility in Malaysia through both on-site employee restrictions as well as a complete shutdown of all manufacturing in the region during early July. While we were able to reopen our factory in mid-July, once the government confirmed we were an essential business, we remained under headcount limitations until the third week of August. With 50% of our weldment capacity located in Malaysia, our overall output in the country was reduced by 40% in the third quarter of 2021 due to the EMCO restrictions.

In addition to the recent impacts in Malaysia, we experienced increases in direct costs within our factories associated with employee personal protective equipment (“PPE”), facility cleaning and layout changes, together with increases in logistics costs and employee labor costs, as well as other operating inefficiencies. Additionally, our supply chain has been negatively impacted as a result of the larger, ongoing global supply chain disruption, impacting our ability to source certain components timely. These factors have resulted

31

in, and may continue to result in, lower revenues and operating margins. The extent and duration of these impacts cannot be specifically quantified given the dynamic nature and breadth of the pandemic’s impact on our operations and that of our customers and suppliers.

Components of Our Results of Operations

The following discussion sets forth certain components of our statements of operations as well as significant factors that impact those items.

Sales

We generate sales primarily from the design, manufacture, and sale of subsystems and components primarily for semiconductor capital equipment. Sales are recognized when control of promised goods or services is transferred to our customers, in an amount that reflects the consideration we expect to be entitled to in exchange for those goods or services. Our shipping terms are generally “shipping point.” Accordingly, control transfers, and sales are recognized, at the point-in-time of shipment.

Cost of Sales and Gross Profit

Cost of sales consists primarily of purchased materials, direct labor, indirect labor, factory overhead cost, and depreciation expense for our manufacturing facilities and equipment. Our business has a highly variable cost structure with low fixed overhead as a percentage of cost of sales. In addition, our existing global manufacturing plant capacity is scalable, and we are able to adjust to increased customer demand for our products without significant additional capital investment. We operate our business in this manner to avoid having excessive fixed costs during a cyclical downturn while retaining flexibility to expand our production volumes during periods of growth. However, this approach results in a smaller increase in gross margin as a percentage of sales in times of increased demand.

Since the gross margin on each of our products differs, our overall gross margin as a percentage of our sales changes based on the mix of products we sell in any period.

Operating Expenses

Our operating expenses primarily include research and development and sales, general, and administrative expenses. Personnel costs are the most significant component of operating expenses and consist of salaries, benefits, bonuses, and share-based compensation. Operating expenses also include overhead costs for facilities, IT, and depreciation. In addition, our operating expenses include amortization expense of acquired intangible assets and certain non-recurring costs, including facility shutdown costs and executive transition-related costs.

Research and development – Research and development expense consists primarily of activities related to product design and other development activities, new component testing and evaluation, and test equipment and fixture development. We expect research and development expense will continue to increase in absolute dollars due to continued development of our own IP and product offerings for existing and new customer markets and increases in our customers’ demand for new product designs.

Selling, general, and administrative – Selling expense consists primarily of salaries and commissions paid to our sales and sales support employees and other costs related to the sales of our products. General and administrative expense consists primarily of salaries and overhead associated with our administrative staff, professional fees, and depreciation and other allocated facility related costs. We expect selling expenses to increase in absolute dollars as we continue to invest in expanding our markets and as we expand our international operations. We expect general and administrative expenses to also increase in absolute dollars due to an increase in employee-related costs, regulatory compliance, and accounting expenses.

Amortization of intangibles – Amortization of intangible assets is related to our finite-lived intangible assets and is computed using the straight-line method over the estimated economic life of the asset.

Interest Expense

Interest expense consists of interest on our outstanding debt under our credit facilities, including amortization of debt issuance costs, and any other indebtedness we may incur in the future.

32

Other Expense (Income), Net

The functional currency of our international operations is the U.S. dollar. Transactions denominated in currencies other than the functional currency generate foreign exchange gains and losses that are included in other expense (income), net on the accompanying consolidated statements of operations. Substantially all of our sales contracts, and most of our agreements with third-party suppliers, provide for pricing and payment in U.S. dollars. Accordingly, these transactions are not subject to material exchange rate fluctuations.

Income Tax Expense (Benefit)

Income tax expense (benefit) consists primarily of taxes on our taxable income related to our domestic and foreign operations, offset by the benefit of our tax holiday in Singapore, which was extended through 2026. In 2021, the benefit related to our Singapore tax holiday, compared to the Singapore statutory tax rate, was $9.7 million. Income tax is also impacted by certain withholding taxes, stock option and RSU activity, and credit generation. Stock options and RSUs have historically provided a discrete benefit to our provision for income taxes in the period they were exercised or vested, respectively, due to increases in our stock price.

Critical Accounting Estimates

Our consolidated financial statements have been prepared in accordance with U.S. generally accepted accounting principles. The preparation of these consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, sales, expenses, and related disclosures. We base our estimates on historical experience and on various other assumptions that we believe are reasonable under the circumstances. We evaluate our estimates and assumptions on an ongoing basis. Actual results may differ from these estimates. To the extent that there are material differences between these estimates and our actual results, our future financial statements will be affected.

The critical accounting policies requiring estimates, assumptions, and judgments that we believe have the most significant impact on our consolidated financial statements are described below.

Inventory Valuation

Inventories are stated at the lower of cost or net realizable value. The majority of our inventory values are based upon standard costs. On a quarterly basis, we analyze the value of our inventory and periodically record write-downs for estimated excess and obsolete inventory. This analysis is based on estimated future consumption compared to inventory quantities on-hand. The estimate is based on how assumptions of historical consumption, recency of purchases, backlog, and other factors indicate future consumption. Once the value of inventory is adjusted, the original cost of our inventory, less the write-down, represents its new cost basis. Reversal of these write-downs are recognized only when the related inventory has been scrapped or sold. During 2021, 2020, and 2019, we wrote down inventory determined to be excessive or obsolete by $1.9 million, $4.6 million, and $1.1 million, respectively.

Business Combinations

We account for business combinations using the acquisition method of accounting, which requires that assets acquired and liabilities assumed are recorded at fair value. Any excess of the purchase price over the fair value of specifically identifiable assets is recorded as goodwill.

Significant judgment is required in estimating the fair value of intangible assets. Our typical intangible assets acquired include customer relationships and order backlogs. The most critical areas of judgment in applying the acquisition method include selecting the appropriate valuation techniques and assumptions that are used to measure the acquired assets and assumed liabilities at fair value. There are several methods that can be used to determine the fair value of intangible assets. We typically use an income approach to value the specifically identifiable intangible assets, which is based on forecasts of expected future cash flows. Under the income approach, we utilize a multi-period excess earnings methodology to value the primary intangible asset of a business combination. Assumptions around expected future cash flows used in the fair value estimates are based on available historical information and industry, market, and peer data to inform our future expectations. We typically consult with an independent advisor to assist in the valuation of intangible assets. While we use our best estimates and assumptions to accurately value assets acquired and liabilities assumed at the acquisition dates, our estimates are inherently uncertain and subject to refinement. In addition, unanticipated market or macroeconomic events and circumstances may occur that could affect the accuracy or validity of the estimates and assumptions. If the estimates do not reflect future results or assumptions utilized in the valuation are inaccurate, then our recorded intangible assets and goodwill may become impaired. In November 2021, in connection with our acquisition of IMG, we recorded identifiable intangibles and preliminary goodwill of $65.0 million and $161.0 million, respectively.

33

Results of Operations

The following table sets forth our results of operations for the periods presented. The period-to-period comparison of results is not necessarily indicative of results for future periods.

The following table sets forth our results of operations as a percentage of our total sales for the periods presented.

34

Comparison of 2021 and 2020

Net Sales

The increase in net sales from 2020 to 2021 was primarily due to strong demand from our customers as a result of continued growth in the global wafer fabrication equipment market, partially offset by production constraints as a result of challenges in our supply chain, as noted above in the commentary above under the heading, Item 7 – Management’s Discussion and Analysis of Financial Condition and Results of Operations – Key Factors Affecting Our Business – COVID‑19 Pandemic and Global Supply Chain.

Net sales to U.S. customers increased by $53.1 million in 2021 to $544.1 million. On a relative basis, net sales to U.S. customers as a percent of total net sales decreased from 53.7% in 2020 to 49.6% in 2021.

Net sales to international customers increased by $129.5 million in 2021 to 552.8 million. On a relative basis, net sales to international customers as a percent of total net sales increased from 46.4% in 2020 to 50.4% in 2021.

Cost of Sales and Gross Profit

The increase in the gross amounts of cost of sales and gross profit from 2020 to 2021 was primarily due to the factors mentioned in the commentary above under the above heading, Net Sales.

The 250 basis point increase in our gross margin from 2020 to 2021 was primarily due to was primarily due to increased factory utilization, cost reduction initiatives, and customer mix, partially offset by increased materials and logistics costs and increased factory inefficiency due to challenges in our supply chain, as noted above in the commentary above under the heading, Item 7 – Management’s Discussion and Analysis of Financial Condition and Results of Operations – Key Factors Affecting Our Business – COVID‑19 Pandemic and Global Supply Chain.

Additionally, our gross margin for 2021 was impacted by the following discrete items on a year-over-year basis: We incurred a $1.4 million contract settlement loss in 2020 that did not recur in 2021, favorably impacting gross margin, and we incurred $1.7 million in charges related to acquired-inventory being recorded at fair value, the majority of which was from our acquisition of IMG, unfavorably impacting gross margin..

Research and Development

The increase in research and development expenses from 2020 to 2021 was primarily due to increased employee-related expense, as we expand our engineering team to design and engineer next generation high performance solutions for our customers.

35

Selling, General, and Administrative

The increase in selling, general, and administrative expense from 2020 to 2021 was primarily due to (i) $4.4 million in transaction costs associated with our acquisition of IMG in November 2021, a (ii) $4.3 million in employee-related costs (excluding share-based compensation expense) due to increased headcount, salaries, and bonus charges, (iii) $1.3 million in increased IT hardware, software, and service costs, and (iv) $0.8 million in increased share-based compensation expense, partially offset by $1.8 million in executive transition costs that we incurred in 2020 that did not recur in 2021.

Amortization of Intangible Assets

The increase in amortization expense from 2020 to 2021 was due to incremental amortization expense from intangible assets acquired in connection with our acquisition of IMG in November 2021.

Interest Expense

The decrease in interest expense from 2020 to 2021 was primarily due to a 101 basis point decrease in our weighted average interest rate during the year, from 3.75% to 2.74%, and a $10.7 million decrease in the average amount borrowed during the year. The decrease in our weighted average interest rate from 2020 to 2021 was primarily due to decreases in the applicable margin component of our all-in borrowing rate due to continuous decreases in our leverage ratio during 2020 and 2021 and a lower overall applicable margin we incur for borrowings under our October 2021 amended and restated credit agreement.

Other Expense, Net

The increase in other expense, net from 2020 to 2021 was primarily due to a $0.7 million loss on extinguishment of debt we incurred in connection with entering into an amended and restated credit agreement in October 2021, partially offset by favorable foreign currency fluctuations for transaction denominated in currencies other than the U.S. dollar.

36

Income Tax Benefit

The increase in tax expense from 2020 to 2021 was primarily due to increased taxable income in the U.S, partially offset by increased discrete benefits from share-based compensation activity.

Non-GAAP Results

Management uses non-GAAP metrics to evaluate our operating and financial results. We believe the presentation of non-GAAP results is useful to investors for analyzing business trends and comparing performance to prior periods, along with enhancing investors’ ability to view our results from management’s perspective. Non-GAAP gross margin is defined as non-GAAP gross profit divided by net sales. Non-GAAP gross profit and non-GAAP net income are defined as: gross profit or net income excluding, as applicable, (1) amortization of intangible assets, share-based compensation expense, and non-recurring expenses, including contract settlement losses and facility shutdown costs, to the extent they are present in gross profit or net income; and (2) the tax impacts associated with our non-GAAP adjustments, as well as non-recurring discrete tax items. Non-GAAP diluted earnings per share (“EPS”) is defined as non-GAAP net income divided by weighted average diluted ordinary shares outstanding during the period.

Non-GAAP results have limitations as an analytical tool, and you should not consider them in isolation or as a substitute for our results reported under GAAP. Other companies may calculate non-GAAP results differently or may use other measures to evaluate their performance, both of which could reduce the usefulness of our non-GAAP results as a tool for comparison.

Because of these limitations, you should consider non-GAAP results alongside other financial performance measures and results presented in accordance with GAAP. In addition, in evaluating non-GAAP results, you should be aware that in the future we will incur expenses such as those that are the subject of adjustments in deriving non-GAAP results and you should not infer from our presentation of non-GAAP results that our future results will not be affected by these expenses or any unusual or non-recurring items.

The following table presents our unaudited non‑GAAP gross profit and non-GAAP gross margin and and a reconciliation from gross profit, the most comparable GAAP measure, for the periods indicated:

Included in this amount for 2021 are (i) write-off costs associated with inventories determined during the period to be obsolete of $2.9 million and (ii) severance costs associated with affected employees of $0.2 million, partially offset by (iii) a gain realized upon the sale of equipment and other fixed assets of $0.5 million.

Included in this amount for 2020 are (i) write-off costs associated with inventories determined during the period to be obsolete of $1.3 million, (ii) severance costs associated with affected employees of $0.5 million, and (iii) accelerated depreciation charges associated with property and equipment that was expected to be abandoned at the time of facility closure of $0.4 million.

37

The following table presents our unaudited non‑GAAP net income and non-GAAP diluted EPS and and a reconciliation from net income, the most comparable GAAP measure, for the periods indicated:

Included in this amount for 2021 are (i) write-off costs associated with inventories determined during the period to be obsolete of $2.9 million, (ii) other shutdown related charges of $0.3 million, and (iii) severance costs associated with affected employees of $0.2 million, partially offset by (iv) a gain realized upon the sale of equipment and other fixed assets of $0.5 million.

Included in this amount for 2020 are (i) write-off costs associated with inventories determined during the period to be obsolete of $1.3 million, (ii) severance costs associated with affected employees of $0.5 million, and (iii) accelerated depreciation charges associated with property and equipment that was expected to be abandoned at the time of facility closure of $0.6 million.

38

Included in this amount for 2020 are primarily (i) a $3.6 million loss on the sale of inventories and property and equipment from our Tampa, Florida facility, (ii) non-capitalized costs incurred in connection with our implementation of a new ERP system and a SOX compliance program, and (iii) costs associated with restructuring and transitioning key leadership roles, including a $1.8 million bonus payment to our former Chief Executive Officer in connection with his transition to executive chairman.

Liquidity and Capital Resources

The following section discusses our liquidity and capital resources, including our primary sources of liquidity and our material cash requirements. Our cash and cash equivalents are maintained in highly liquid and accessible accounts with no significant restrictions.

Material Cash Requirements

Our primary liquidity requirements arise from: (i) working capital requirements, including procurement of raw materials inventory for use in our factories and employee-related costs, (ii) business acquisitions, (iii) interest and principal payments under our credit facilities, (iv) research and development investments and capital expenditures, and (v) payment of income taxes. We have no significant long-term purchase commitments related to procuring raw materials inventory. Our ability to fund these requirements will depend, in part, on our future cash flows, which are determined by our future operating performance and are therefore subject to prevailing global macroeconomic conditions and financial, business, and other factors, some of which are beyond our control.

We believe that our cash and cash equivalents, the amounts available under our credit facilities, and our operating cash flow will be sufficient to fund our business and our current obligations for at least the next 12 months and beyond.

Sources and Conditions of Liquidity

Our ongoing sources of liquidity to fund our material cash requirements are primarily derived from: (i) sales to our customers and the related changes in our net operating assets and liabilities and (ii) proceeds from our credit facilities and equity offerings, when applicable.

Summary of Cash Flows

We ended 2021 with cash and cash equivalents of $75.5 million, a decrease of $177.4 million from December 25, 2020. The decrease was primarily due to cash paid of $268.8 million, net of acquired-cash, to acquire IMG in November 2021 and capital expenditures of $20.8 million, partially offset by net proceeds from our credit facilities of $90.9 million, and cash provided by operating activities of $15.3 million.

The following table sets forth a summary of operating, investing, and financing activities for the periods presented:

Our cash provided by operating activities of $15.3 million during 2021 consisted of net income of $70.9 million, net non-cash charges of $37.2 million, primarily consisting of depreciation and amortization of $26.0 million and share-based compensation expense of $11.5 million, and an increase in our net operating assets and liabilities, net of acquisitions, of $92.8 million.

39

The increase in our net operating assets and liabilities, net of acquisitions, was primarily due to an increase in inventories of $89.2 million and an increase in accounts receivable of $33.5 million, partially offset by an increase in accounts payable of $38.6 million. The increase in our inventories, net of acquired inventories, is primarily driven by elevated purchasing activity pursuant to strong customer demand and certain supply chain component constraints. The increase in accounts receivable, net of acquired receivables, was primarily due to increased revenue in the fourth quarter of 2021 compared to the fourth quarter of 2020 and timing of customer payments. The increase in accounts payable, net of acquired payables, is primarily due to higher purchases during the fourth quarter of 2021 compared to the fourth quarter of 2020 and payment timing.

Cash used in investing activities during 2021 consists of cash paid to acquire IMG in November 2021 of $268.8 million, net of cash acquired, capital expenditures of $20.8 million, and net proceeds from the purchase and sale of marketable securities of $0.5 million, partially offset by proceeds from the sale of property and equipment of $0.5 million.

Cash provided by financing activities during 2021 consists of net proceeds from our credit facilities of $90.9 million, which includes $1.9 million in fees incurred associated with effecting an amended and restated credit agreement in October 2021, and net proceeds from share-based compensation activity of $6.0 million.

Recent Accounting Pronouncements

From time to time, the Financial Accounting Standards Board (“FASB”) or other standards setting bodies issue new accounting pronouncements. Updates to the FASB Accounting Standards Codification are communicated through issuance of an Accounting Standards Update (“ASU”). Unless otherwise discussed, we believe that the impact of recently issued guidance, whether adopted or to be adopted in the future, is not expected to have a material impact on our Consolidated Financial Statements upon adoption.

To understand the impact of recently issued guidance, whether adopted or to be adopted, please review the information provided in Note 1 – Organization and Summary of Significant Accounting Policies of our consolidated financial statements in Part IV, Item 15 of this report.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are exposed to financial market risks, including changes in currency exchange rates and interest rates.

Foreign Currency Exchange Risk

Currently, substantially all of our sales and arrangements with third-party suppliers provide for pricing and payment in U.S. dollars and, therefore, are not subject to material exchange rate fluctuations. As a result, we do not expect foreign currency exchange rate fluctuations to have a material effect on our results of operations. However, increases in the value of the U.S. dollar relative to other currencies would make our products more expensive relative to competing products priced in such other currencies, which could negatively impact our ability to compete. Conversely, decreases in the value of the U.S. dollar relative to other currencies could result in our foreign suppliers raising their prices in order to continue doing business with us.

While not currently significant, we do have certain operating expenses that are denominated in currencies of the countries in which our operations are located, and may be subject to fluctuations due to foreign currency exchange rates, particularly the Singapore dollar, Malaysian ringgit, British pound, and euro. Fluctuations in foreign currency exchange rates may cause us to recognize transaction gains and losses in our statement of operations. To date, foreign currency transaction gains and losses have not been material to our financial statements, and we have not engaged in any foreign currency hedging transactions.

Interest Rate Risk

We had total indebtedness of $295.0 million as of December 31, 2021, exclusive of $2.2 million in debt issuance costs, of which $7.5 million is due within 12 months. We do not enter into investments for trading or speculative purposes and have not used any derivative financial instruments to manage our interest rate risk exposure. We have not been exposed to, nor do we anticipate being exposed to, material risks due to changes in interest rates. As of December 31, 2021, the interest rate on our outstanding debt is based on BSBY, plus an applicable rate depending on our leverage ratio. A hypothetical 100 basis point change in the interest rate on our outstanding debt would have resulted in a $1.9 million and $2.0 million change to interest expense during 2021 and 2020, respectively.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

The financial statements and supplementary financial information required to be filed under this Item 8 are presented beginning on page F‑1 in Part IV, Item 15 of this annual report on Form 10‑K and are incorporated herein by reference.

40

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

ITEM 9A. CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures

We carried out an evaluation under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer (the certifying officers), of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a‑15(e) and 15d‑15(e) under the Securities and Exchange Act, as amended (“the Exchange Act”)) as of December 31, 2021. There are inherent limitations to the effectiveness of any system of disclosure controls and procedures, including the possibility of human error and the circumvention or overriding of the controls and procedures. Accordingly, even effective disclosure controls and procedures can only provide reasonable assurance of achieving their control objectives. Based on this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as a result of the material weaknesses in internal control over financial reporting as described below, our disclosure controls and procedures were not effective as of December 31, 2021.

Management’s Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rules 13a‑15(f) and 15d‑15(f) under the Exchange Act). With the participation of our Chief Executive Officer and Chief Financial Officer, our management, under the oversight of our Board of Directors, evaluated the effectiveness of our internal control over financial reporting as of December 31, 2021 using the framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) in Internal Control—Integrated Framework (2013). We completed our acquisition of IMG Companies, LLC, and its subsidiaries (“IMG”) on November 19, 2021. We are continuing to integrate IMG into our internal control over financial reporting, and management’s evaluation of the effectiveness of our internal control over financial reporting excluded IMG. IMG had total assets of approximately $293.0 million as of December 31, 2021, and included in the results of our operations for 2021 are net sales of $7.3 million from IMG.

Based on that evaluation, management concluded that our internal control over financial reporting was not effective as of December 31, 2021 due to the material weaknesses in internal control over financial reporting, described below. A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis.

The identified material weaknesses related to ineffective information technology general controls (“ITGCs”) in the areas of user access and program change management over certain information technology systems (“IT”) systems that support our financial reporting processes. The control deficiencies were a result of: inadequate design of IT control processes that were lacking sufficient documentation such that successful operation of the ITGC’s were overly dependent upon knowledge and actions of certain individuals with IT expertise; insufficient training of IT personnel on the requirements to maintain evidence of ITGC control processes and procedures; and risk-assessment processes inadequate to identify and assess changes in IT environments that could impact internal control over financial reporting. Our automated and manual business process controls that are dependent on the affected ITGCs were also deemed ineffective because they could have been adversely impacted.

The material weaknesses did not result in any identified misstatements to the financial statements, and there were no changes to previously released financial results.

Our independent registered public accounting firm, KPMG LLP, who audited the consolidated financial statements included in this Annual Report on Form 10‑K, issued an adverse opinion on the effectiveness of the Company’s internal control over financial reporting. KPMG LLP’s report appears on page F‑3 of this Annual Report on Form 10-K.

Remediation

Management is taking steps to remediate the ITGC deficiencies and will continue to take measures designed to ensure that control deficiencies contributing to the material weaknesses are remediated, such that these controls are designed, implemented, and operating effectively. The remediation actions include:

41

The material weaknesses will not be considered remediated until the applicable controls operate for a sufficient period of time and management has concluded, through testing, that the control objective is achieved and the controls are operating effectively. We expect that the remediation of these material weaknesses will be completed prior to the end of fiscal year 2022.

Changes in Internal Control Over Financial Reporting

Other than the material weaknesses identified during the quarter, there have been no other changes in our internal control over financial reporting (as defined in Rules 13a‑15(f) or 15d‑15(f) of the Exchange Act) that occurred during the fourth quarter of December 31, 2021 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Inherent Limitations on Effectiveness of Controls and Procedures

A company’s internal control over financial reporting is a process designed by, or under the supervision of, a company’s principal executive and principal financial officers, or persons performing similar functions, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements in accordance with GAAP. Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. In addition, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with policies or procedures may deteriorate. If we cannot provide reliable financial information, our business, operating results and share price could be negatively impacted.

ITEM 9B. OTHER INFORMATION

None.

ITEM 9C. DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS

None.

42

PART III

ITEM 10. DIRECTORS, EXECUTIVE OFFICERS, AND CORPORATE GOVERNANCE

The information required by this item is incorporated by reference to our Proxy Statement for our 2022 General Meeting to be filed with the SEC within 120 days after the close of the year ended December 31, 2021.

Code of Conduct

We have adopted a code of business ethics and conduct (the “Code of Conduct”) that applies to all employees, officers, and directors, including the principal executive officer, principal financial officer, and principal accounting officer. The Code of Conduct is available on our investor relations website at ir.ichorsystems.com. We intend to post all disclosures that are required by law or NASDAQ listing rules regarding any amendment to, or a waiver of, any provision of the Code of Conduct for the principal executive officer, principal financial officer, principal accounting officer or controller, or persons performing similar functions.

ITEM 11. EXECUTIVE COMPENSATION

The information required by this item is incorporated by reference to our Proxy Statement for our 2022 General Meeting to be filed with the SEC within 120 days after the close of the year ended December 31, 2021.

ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED SHAREHOLDER MATTERS

The information required by this item is incorporated by reference to our Proxy Statement for our 2022 General Meeting to be filed with the SEC within 120 days after the close of the year ended December 31, 2021.

ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

The information required by this item is incorporated by reference to our Proxy Statement for our 2022 General Meeting to be filed with the SEC within 120 days after the close of the year ended December 31, 2021.

ITEM 14. PRINCIPAL ACCOUNTING FEES AND SERVICES

The information required by this item is incorporated by reference to our Proxy Statement for our 2022 General Meeting to be filed with the SEC within 120 days after the close of the year ended December 31, 2021.

PART IV

ITEM 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

The following Consolidated Financial Statements are filed as part of this report under Item 8 – Financial Statements and Supplementary Data.

ITEM 16. FORM 10-K SUMMARY

Not applicable.

43

Report of Independent Registered Public Accounting Firm

To the Shareholders and Board of Directors

Ichor Holdings, Ltd.:

Opinion on the Consolidated Financial Statements

We have audited the accompanying consolidated balance sheets of Ichor Holdings, Ltd. and subsidiaries (the Company) as of December 31, 2021 and December 25, 2020, the related consolidated statements of operations, shareholders’ equity, and cash flows for each of the years in the three-year period ended December 31, 2021, and the related notes (collectively, the consolidated financial statements). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2021 and December 25, 2020, and the results of its operations and its cash flows for each of the years in the three-year period ended December 31, 2021, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company’s internal control over financial reporting as of December 31, 2021, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission, and our report dated February 28, 2022 expressed an adverse opinion on the effectiveness of the Company’s internal control over financial reporting.

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matters

The critical audit matters communicated below are matters arising from the current period audit of the consolidated financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matters below, providing separate opinions on the critical audit matters or on the accounts or disclosures to which they relate.

Evaluation of excess and obsolete inventory

As discussed in Notes 1 and 3 to the consolidated financial statements, the Company reported net inventories of $236.1 million as of December 31, 2021, including an adjustment for excess and obsolete inventory of $14.1 million. The Company states its inventories at the lower of cost or net realizable value. The Company records an adjustment to the cost basis of inventory when evidence exists that the net realizable value of inventory is lower than its cost, which occurs when the Company has excess and/or obsolete inventory. The Company’s model to estimate excess and/or obsolete inventory is based on an analysis of existing inventory quantities on-hand compared to estimated future consumption. Future consumption is estimated based upon assumptions about how historical consumption, recent purchases, backlog and other factors indicate future consumption.

We identified the evaluation of excess and obsolete inventory as a critical audit matter. There was subjective auditor judgement in evaluating whether historical consumption and recent purchases reasonably indicate future consumption used by the Company in their determination that inventory is recorded at the lower of its cost or net realizable value.

F-1

The following are the primary procedures we performed to address the critical audit matter. We evaluated the assumptions used to estimate future consumption by (1) examining historical write-down trends and (2) inspecting publicly available industry information to assess relevant changes to the overall business environment. Additionally, to evaluate whether recent purchases and historical consumption indicates future consumption we selected a sample of products within inventory and for each sample selection we calculated the rate of consumption for current quantity on hand based on (i) historical consumption and (ii) backlog.

Fair value of certain acquired customer relationship intangible assets

As discussed in Note 2 to the consolidated financial statements, on November 19, 2021, the Company acquired IMG Companies, LLC (IMG) and accounted for the transaction as a business combination. As a result of the transaction, the Company recorded intangible assets of $62.4 million for customer relationships associated with the generation of future income from IMG’s existing customers. The estimated fair value of the customer relationship intangible assets was determined using a discounted cash flow model.

We identified the evaluation of the fair value of certain customer relationships acquired in the IMG transaction as a critical audit matter due to the high degree of subjectivity in evaluating discounted future cash flows used to determine the fair value. Specifically, there was a high degree of auditor judgment required to evaluate the forecasted revenue attributable to customer relationships as changes in this assumption could have a significant impact on the fair value of the customer relationships.

The following are the primary procedures we performed to address the critical audit matter. We evaluated the design and tested the operating effectiveness of certain internal controls related to the Company’s acquisition-date valuation process including controls over the development of forecasted revenue attributable to customer relationships. We evaluated the forecasted revenue assumptions attributable to customer relationships by comparing these assumptions to IMG’s historical results, industry publications, as well as the revenue growth rates of guideline peer companies. In addition, we involved valuation professionals with specialized skills and knowledge who assisted in evaluating the relevance of the guideline peer companies based on financial and non-financial metrics.

/s/ KPMG LLP

We have served as the Company’s auditor since 2011.

Portland, Oregon

February 28, 2022

F-2

Report of Independent Registered Public Accounting Firm

To the Shareholders and Board of Directors

Ichor Holdings, Ltd.:

Opinion on Internal Control Over Financial Reporting

We have audited Ichor Holdings, Ltd. and subsidiaries' (the Company) internal control over financial reporting as of December 31, 2021, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. In our opinion, because of the effect of the material weaknesses, described below, on the achievement of the objectives of the control criteria, the Company has not maintained effective internal control over financial reporting as of December 31, 2021, based on criteria established in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated balance sheets of the Company as of December 31, 2021 and December 25, 2020, the related consolidated statements of operations, shareholders’ equity, and cash flows for each of the years in the three-year period ended December 31, 2021, and the related notes (collectively, the consolidated financial statements), and our report dated February 28, 2022 expressed an unqualified opinion on those consolidated financial statements.

A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the company’s annual or interim financial statements will not be prevented or detected on a timely basis. The material weaknesses relate to ineffective information technology general controls (ITGCs) in the areas of user access and program change-management over certain information technology systems that support the Company’s financial reporting processes which have been identified and included in management’s assessment. The material weaknesses were considered in determining the nature, timing, and extent of audit tests applied in our audit of the 2021 consolidated financial statements, and this report does not affect our report on those consolidated financial statements.

The Company acquired IMG Companies, LLC during 2021, and management excluded from its assessment of the effectiveness of the Company’s internal control over financial reporting as of December 31, 2021, IMG Companies, LLC’s internal control over financial reporting associated with total assets of $293 million and total revenues of $7.3 million included in the consolidated financial statements of the Company as of and for the year ended December 31, 2021. Our audit of internal control over financial reporting of the Company also excluded an evaluation of the internal control over financial reporting of IMG Companies, LLC.

Basis for Opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management's Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and Limitations of Internal Control Over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

F-3

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ KPMG LLP

Portland, Oregon

February 28, 2022

F-4

ICHOR HOLDINGS, LTD.

Consolidated Balance Sheets

(dollars in thousands, except per share data)

See accompanying notes to consolidated financial statements.

F-5

ICHOR HOLDINGS, LTD.

Consolidated Statements of Operations

(dollars in thousands, except per share data)

See accompanying notes to consolidated financial statements.

F-6

ICHOR HOLDINGS, LTD.

Consolidated Statements of Shareholders’ Equity

(dollars in thousands)