IMMERSION CORP - Annual Report: 2012 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

For the fiscal year ended December 31, 2012 or

For the transition period from                     to                     

Commission File Number 000-27969

Immersion Corporation

(Exact name of registrant as specified in its charter)

30 Rio Robles

San Jose, California 95134

(Address of principal executive offices, zip code)

(408) 467-1900

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes [    ]  No [x]

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes [    ]  No [x]

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes [x]        No [    ]

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes [x]  No [    ]

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    [x]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes [    ]  No [x]

The aggregate market value of the registrant’s common stock held by non-affiliates of the registrant on June 30, 2012, the last business day of the registrant’s most recently completed second fiscal quarter, was $77,681,856 (based on the closing sales price of the registrant’s common stock on that date). Shares of the registrant’s common stock held by each officer and director and each person whom owns 5% or more of the outstanding common stock of the registrant have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes. Number of shares of common stock outstanding at February 25, 2013: 27,351,358.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the definitive Proxy Statement for the 2013 Annual Meeting are incorporated by reference into Part III hereof.

Table of Contents

IMMERSION CORPORATION

2012 FORM 10-K ANNUAL REPORT

TABLE OF CONTENTS

2

Table of Contents

Forward-looking Statements

In addition to historical information this Annual Report on Form 10-K includes forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended (“the Exchange Act”). The forward-looking statements involve risks and uncertainties. Forward-looking statements are identified by words such as “anticipates,” “believes,” “expects,” “intends,” “may,” “will,” and other similar expressions. However, these words are not the only way we identify forward-looking statements. In addition, any statements which refer to expectations, projections, or other characterizations of future events, or circumstances, are forward-looking statements. Actual results could differ materially from those projected in the forward-looking statements as a result of a number of factors, including those set forth below in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” “Risk Factors” and those described elsewhere in this report, and those described in our other reports filed with the Securities and Exchange Commission (“SEC”). We caution you not to place undue reliance on these forward-looking statements, which speak only as of the date of this report, and we undertake no obligation to update these forward-looking statements after the filing of this report. You are urged to review carefully and consider our various disclosures in this report and in our other reports publicly disclosed or filed with the SEC that attempt to advise you of the risks and factors that may affect our business.

PART I

Item 1.  Business

Overview

Immersion Corporation (“Immersion”) is a premier intellectual property and technology licensing company focused on the creation, design, development and licensing of patented haptic innovations and technologies that allow people to use their sense of touch more fully when operating a wide variety of digital devices. Our mission is to transform user experiences through groundbreaking innovations and technologies designed to provide unique and customizable touch feedback effects, excite the senses in games, videos and music, restore mechanical feel by providing intuitive and unmistakable confirmation, improve safety by overcoming distractions, and expand usability when audio and visual feedback are ineffective. While we believe that our innovations are broadly applicable, we are currently focusing our marketing and business development activities on the following target markets: mobile communications and consumer electronics, automotive, gaming, commercial and industrial, and medical.

Prior to April 2010, we managed these markets under two operating and reportable segments: 1) the Touch Line of Business and 2) the Medical Line of Business. In March 2010, we sold certain assets of the Endoscopy, Endovascular, and Laparoscopy medical simulation product lines. See Note 11 of the consolidated financial statements. As a result, our business has been consolidated into a single segment and we now operate primarily under a licensing model. As such, we no longer report on a segment basis. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations” as well as the notes to the consolidated financial statements for further information.

In our target markets, we license our software and intellectual property to manufacturers for use in products sold under their own brand names. We and our wholly-owned subsidiaries hold more than 1,300 issued or pending patents in the U.S. and other countries, covering a wide range of digital technologies, including many of the ways in which touch-related technology can be incorporated into and between hardware products, systems software, application software and digital content.

Immersion was incorporated in 1993 in California and reincorporated in Delaware in 1999. We consummated our initial public offering on November 12, 1999.

3

Table of Contents

Our Business Strategy

Our goal is to continue to be the technology and market leader in haptic technologies and drive the adoption of our touch software and intellectual property across markets and applications to improve the user experience with digital devices and systems. Key aspects of our strategy include:

Innovate: Develop and patent our innovative technology to provide haptics in mobile device, automotive, gaming, medical, and consumer electronics products to transform user experiences with unique and customizable touch feedback effects.

Drive Adoption: Communicate the advantages of our patented innovations and technologies to the industry and encourage their adoption through demonstrations and incorporation in the products of world-class companies.

Monetize: License our patented inventions and technology solutions to customers for use in their mobile device, automotive, gaming, medical, and consumer electronics products.

We believe that the successful execution of this strategy requires an exceptional and unparalleled licensing platform and business model that relies on the skills and talent of our employees. Accordingly, we seek to hire and retain world class haptic expertise, as well as the executive management and operating personnel required to successfully execute our business strategy. In order to attract the quality of employees required for this business model, we have created an environment and culture that encourages, fosters, and supports research, development, and innovation in breakthrough technologies with significant opportunities for broad industry adoption through licensing. We believe that we have created a compelling company for inventors and innovators who are able to work within a business model and platform that focuses on intellectual property development and licensing to drive strong future growth.

Haptics and Its Benefits

While digital devices offer many advanced capabilities they often fail to provide users with the meaningful touch experiences that enrich their real world interactions. For example, when dialing a number or entering text on a conventional touchscreen, users feel only the touchscreen surface, without the subtle, yet confirming sensation they expect from mechanical switches and keyboards. Similarly, communications with other users and experiences with digital content can feel “flat” or “lifeless” without the accompanying tactile feedback that is an essential part of the physical world. Immersion’s haptic technologies can restore these missing elements of confirmation, realism and rich communication to the digital world.

Immersion’s haptic technology breathes life into digital interfaces, allowing users feel the vibrating force or resistance as they push a virtual button, scroll through a list or encounter the end of a menu. In a video or mobile game with haptics, users can feel the gun recoil, the engine rev, or the crack of the bat meeting the ball. When simulating the placement of cardiac pacing leads, a user can feel the forces that would be encountered when navigating the leads through a beating heart, providing a more realistic experience of performing this procedure.

Haptics can enhance the user experience through:

4

Table of Contents

We believe these features of our haptic technology are broadly applicable to a number of markets and devices. By continuing to enhance these features through further research and development, we believe we will serve as a strategic partner for our customers and partners in helping them develop a more compelling user experience for consumers.

Our Offerings

Our patented inventions and technology solutions are offered to our customers through either a solutions license or a patent license.

We offer our customers solutions licenses to support the implementation and adoption of haptics in their products. Our solutions license offerings include a range of solutions developed by Immersion, including our TouchSense solutions that we provide for incorporation into mobile devices, video console gaming systems, consumer electronics, medical simulation and surgical robotic systems, and automotive controls. These solutions license agreements may have both a fixed price (non-recurring) component and ongoing royalties. Further, under solutions licenses, our customers typically receive licenses to our patents necessary to implement the licensed solutions in their products, with the specific rights and restrictions to the applicable patents described in their license agreements.

We also offer our customers patent licenses, through which we provide a license to specified aspects of our broad portfolio of patented inventions. The patent license provides the customer with a defined right to use our patented innovations in the customer’s own products, which may be limited to specific fields of use. Our patent license agreements are structured with fixed, variable or a hybrid of fixed and variable royalty payments over certain defined periods.

For both our solutions and patent licensees, we offer our expertise to help our customers design and integrate touch effects into their products. This expertise may include turn-key engineering and integration services, design kits for prototyping, authoring tools, application programming interfaces (“APIs”), and the development of hardware and software technologies that are compatible with industry standards.

Solution Licenses

We license our solutions to original equipment manufacturers (“OEMs”) or their suppliers who then include our solutions in products sold under their own brand names. We license many of our technology solutions under the TouchSense brand, and have developed a family of TouchSense solutions that are intended to address the needs of our target markets.

TouchSense 1000: Targeted to the commercial and industrial and automotive markets, the TouchSense 1000 family offers haptic effects for large touch screens, touch panels, and touch surfaces that are optimized for strength in demanding applications and extreme environments.

TouchSense 2000: Targeted to mass market consumer electronic devices such as microwaves, cameras and tablet PCs, the TouchSense 2000 family provides haptic effects for touch screens and touch panels, providing pre-designed haptic effects and user interface (“UI”) support along with design recommendations oriented for mass market devices. TouchSense 2000 is offered as a direct software license to the OEM as well as through our integrated circuit partners who preload their integrated circuits with the TouchSense 2000 Player.

5

Table of Contents

TouchSense 3000: Targeted to the mobile device and consumer electronics market, the TouchSense 3000 family provides precise actuator control to single actuator designs, making it an easy to implement solution that enables over 100 haptic effects.

TouchSense 4000: Building off the TouchSense 3000 family, the TouchSense 4000 family also targets the mobile communications and consumer electronics market by providing controls for higher-fidelity haptic designs which utilize multiple actuators. The TouchSense 4000 family offers a higher level of control, creating the opportunity for an increased number of haptic effects with finer resolution.

TouchSense 5000: Targeted to the mobile communications and consumer electronics market, the TouchSense 5000 family offers haptic controls for high-fidelity piezo and/or smart actuators, creating crisp, realistic and nuanced haptic effects.

Integrator: Working in conjunction with Immersion’s mobile TouchSense solutions, Integrator consists of modules that OEMs can choose from to easily incorporate haptic experiences into mobile devices. Integrator Modules include: UI Module, which streamlines haptic integration by automatically associating haptic effects with select UI elements such as button presses and scrolling actions; Reverb Module, which uses the real-time audio track in digital content such as games to create complementary haptic effects; Themes Module, which allows OEMs to waterfall a signature haptic feel through the UI of the device; WebKit Module, which extends the theme controls to the device internet browser experience; and Ringtones Module, which enables support of unique and distinct haptic vibrations to be used during the device silent mode.

Patent Licenses

In addition to licensing software solutions, we also offer patent licenses to those customers who wish to develop their own proprietary haptic implementations. We license our patents across all of our target markets.

Basic Haptics: Targeted primarily to the mobile communications and consumer electronics markets, a Basic Haptics license allows customers to develop their own haptic implementations or utilize standard operating systems’ implementations of haptics where the haptic effects are based on sensing a user’s input on a touchscreen and associating events with a limited set of haptic effects in a multi-tasking environment.

Force Feedback: Targeted at the gaming, automotive, and medical markets, Immersion’s Force Feedback license allows customers to create custom implementations of force feedback based on the unique requirements of the application including: gaming peripherals and simulation; navigation controls for automotive environments; as well as medical applications such as virtual reality training simulators for interventional and surgical procedures, robotic surgical tools, medical instrumentation, and wearable medical devices.

Haptic Expertise

For both our TouchSense and patent licensees, we offer our expertise to help them design and integrate touch effects into their products. This expertise includes turn-key engineering and integration services, design kits for prototyping, authoring tools, APIs, and the development of hardware and software technologies that are compatible with industry standards.

Turn-key Engineering and Integration Services — We offer engineering assistance, including technical and design assistance and integration services that allow our licensees to incorporate our touch-enabling products and technologies into their products at a reasonable cost and in a shortened time frame. This allows them to get to market quickly by using our years of haptic development and solution deployment expertise. We offer product development solutions including product software libraries, design, prototype creation, technology transfer, actuator selection, component sourcing, development/integration kits, sample source code, comprehensive documentation, and other engineering services. In addition, we help ensure a quality end-user experience by offering testing and certification services to a number of licensees.

6

Table of Contents

Design Kits for Prototyping — We offer several design kits for customers to use for technology evaluation, internal evaluation, usability testing, and focus group testing. The kits include components and documentation that designers, engineers, and system integrators need for prototyping TouchSense touch feedback into an existing or sample product.

Authoring Tools — We license authoring tools that enable haptic designers and software developers to quickly design and incorporate customized touch feedback into their applications. Authoring tools allow designers to create, modify, experience, and save or restore haptic effects for a haptically-enabled device. Our authoring tools are the equivalent of a computer-aided design application for haptics, and support vibro-tactile haptic devices (such as mobile devices, touchscreens, and vibro-tactile gaming peripherals), as well as kinesthetic haptic devices (such as rotary devices, 2D devices, and joysticks). Various haptic effect parameters can be defined and modified, and the result immediately experienced. Our authoring tools run on mainstream operating systems such as Microsoft Windows. Commencing in March 2011, we have made Immersion’s Haptic Development Platform available to Android software developers for use in integrating tactile effects into mobile games and other downloadable applications.

Application Programming Interfaces — Our APIs provide haptic-effect generation capability. This allows designers and software programmers to focus on adding haptic effects to their applications instead of struggling with the mechanics of programming real-time algorithms and handling communications between computers and devices. Some of our haptic APIs are device independent (for example, they work with scroll wheels, rotary knobs, 2D joysticks, and other devices) to allow flexibility and reusability. Others are crafted to meet the needs of a particular customer or industry.

Platform Independent Solutions — Our software driver and API technology have been designed to be easily ported to a variety of operating systems including Windows, Windows CE, REX (from QUALCOMM), and various Linux platforms including Android, Maemo and VxWorks.

Products and Markets

Mobile Communications and Consumer Electronics — We offer both TouchSense solutions and patent licenses to OEMs in the mobile device and consumer electronics markets. In addition, our integrated circuit partners preload their integrated circuits with our TouchSense solutions and offer these integrated circuits to OEMs in the mobile device market.

Our licensees currently include some of the top makers of mobile devices in the world including: Samsung, Motorola, LG Electronics, Fujitsu, NEC, Pantech Co., Ltd., and Toshiba, as well as integrated circuit manufacturers such as Texas Instruments and Atmel.

For the years ended December 31, 2012, 2011, and 2010, respectively, 46%, 44%, and 36% of our total revenues were generated from mobile communications.

Gaming Devices — We have licensed our patents to Microsoft Corporation for use in its gaming products and to Sony Computer Entertainment Inc (“Sony”). for use in its legacy and current PlayStation console gaming products. We have also licensed our patents to over a dozen gaming peripheral manufacturers and distributors, including Logitech and Mad Catz, Inc., to bring haptic technology to PC platforms including Microsoft Windows operating systems, as well as to video game consoles.

In the video game console peripheral market, we have licensed our patents for use in hundreds of spinning mass tactile feedback devices and force feedback devices such as steering wheels and joysticks to various manufacturers, including: Bensussen Deutsch & Associates Inc., Datel Design & Inc., dreamGear LLC, Logitech Inc., Mad Catz, Inc., Microsoft Corporation, Performance Designed Products (formerly Electro Source LLC) , Razer PTE Ltd, and Sony. These products are designed to work with one or more video game consoles including the Xbox and Xbox 360 from Microsoft; the PlayStation, PlayStation 2, and PlayStation 3 from Sony; and the N64, GameCube, and Wii from Nintendo. Currently, products sold to consumers using Immersion technology include PC joysticks, steering wheels, and gamepads from various licensees.

7

Table of Contents

For the years ended December 31, 2012, 2011, and 2010, respectively, 28%, 31%, and 24% of our total revenues were generated from PC and console gaming revenues.

Automotive — We offer both TouchSense solutions and patent licenses to automotive component suppliers. Our current licensees include: ALPS Electric Co., Ltd, Methode Electronics, Inc., Visteon, SMK Corporation, and Panasonic Corp.

For the years ended December 31, 2012, 2011, and 2010, respectively, 6%, 6%, and 6% of our total revenues were from automotive customers.

Medical — In March 2010, we sold certain assets of the endoscopy, endovascular, and laparoscopy medical simulation product lines. See Note 11 of the consolidated financial statements for a further discussion.

As a result of this sale of the majority of the medical products business to CAE Healthcare USA Inc. (“CAE”) in March 2010, we maintained a single remaining medical simulation product line, the Virtual IV system, which simulates needle-based procedures such as intravenous catheterization and phlebotomy, and is a jointly developed product with our partner Laerdal Medical A/S, who distributes this product on a world-wide basis. In December of 2012, we signed a licensing agreement for this product line with Laerdal Medical A/S. Moving forward in 2013, we will continue to license patents to the medical market, but will no longer manufacture any product lines. Our current licensees include: MAKO Surgical Corp., SOFAR S.P.A., and Laerdal Medical A/S.

For the years ended December 31, 2012, 2011, and 2010, respectively 16%, 15%, and 23% of our total revenues were from the medical line of business. The decline in 2011 primarily reflects the decision to divest most of our medical product lines to CAE in March 2010.

Manufactured Products

Prior to the divesting of our medical products line of business in March 2010, we produced our products using both contracted and in-house manufacturing. Since the divestiture, all products have been produced using contracted manufacturing services.

Our product solutions, which do not represent a material part of our business, are limited to components used for design kits, and through 2012, for a single medical product, the Virtual IV system which was manufactured on a “private” label basis for a customer (See Product and Markets — Medical). In December 2012, we entered into a licensing agreement with our Virtual IV system partner and will no longer produce the Virtual IV systems, but will license the Virtual IV systems to this partner instead.

Sales and Distribution

Our sales have been seasonal with typically an increase in the first quarter reflecting holiday shipments of our customers with integrated Immersion technology. Both mobile devices and gaming products are subject to shipment increases in the fourth quarter which is reflected in our first quarter revenue. Seasonal fluctuations have not been extremely significant to our overall revenue trends in the past. With mobile device sales continuing to increase, our business may become more seasonal as we leverage new products and have our technology in additional mobile device designs.

We employ a consolidated direct sales force in the United States, Europe, and Asia to license our solutions and patents across our target markets and augment that sales force via partnerships and licensing agreements with component suppliers and system integrators.

Competition

Our biggest source of competition derives from decisions made by internal design groups at our OEM customers and potential OEM customers. We expect that these internal design groups will continue to make choices regarding whether to implement haptics or not, whether to use our solutions or other standard haptic capability (i.e., Android), or even whether to develop their own haptic solutions.

8

Table of Contents

In the event we have granted or grant a license to our patent portfolio to an OEM, its internal design group may design technology that is less expensive to implement or that enables products with higher performance or additional features. In some cases, the OEM may elect not to include haptics in its products due to the higher bill of materials costs associated with incorporating haptics.

In addition to licensing OEMs directly, our business also includes licensing to semiconductor manufacturers who incorporate certain of our lower tiered technology in their integrated circuits for use in certain electronic devices.

The principal competitive factors are the strength of the patents underlying the technology, the technological expertise and design innovation and the use, reliability and cost-effectiveness of the solutions. We believe we compete favorably in all these areas.

For licensed applications, our competitive position is partially dependent on the competitive positions of our licensees that pay a license fee and/or royalty. Our licensees’ markets are highly competitive. We believe that the principal competitive factors in our licensees’ markets include price, performance, user-centric design, ease-of-use, quality, and timeliness of products, as well as the manufacturer’s responsiveness, capacity, technical abilities, established customer relationships, retail shelf space, advertising, promotional programs, and brand recognition. Touch-related benefits in some of these markets may be viewed simply as enhancements and compete with nontouch-enabled technologies.

Research and Development

Our success depends on our ability to invent, improve, and reduce the cost of our technologies in a timely manner; to design and develop products to meet specifications based on research and our understanding of customer needs and expectations; and to collaborate with our licensees who are integrating our technologies into theirs.

Immersion Engineering — We have assembled a multi-disciplinary team of highly skilled engineers and scientists with the experience required for development of touch-enabling technology. The team’s experience includes skills related to mechanical engineering, electrical engineering, embedded systems and firmware, control techniques, software, quality control, haptic content design, and project and process management.

Application Engineering and Technical Support — We may provide application engineering and technical support during integration of our touch-enabling technology into customer products. To facilitate the validation and adoption of touch-enabling technology, we have developed various design kits. These kits may include actuators, mounting suggestions, controller boards, software libraries, programming examples, and documentation. Our application engineers support customer use of these design kits, including through phone and e-mail technical support and onsite training.

Research — We have multidisciplinary expertise in usability and multimodal user interface design, actuator design, sensors, integration, material science, real-time simulation algorithms, control, and software development. Our team is involved with existing and potential partners to help them assess and prove the value of haptics in their field of interest, creating main competitive differentiator and value added solutions. Our team continues to generate patent applications, actively contributing to the reinforcement of Immersion’s IP position.

User Experience — We have a dedicated team of user interaction specialists, focusing on user research and design to enable new and improved applications of haptics. We have unique expertise in haptics, usability and interface design. Our team is involved with existing and potential partners to help them determine the best implementation of haptics in their specific application. This team works on the cutting edge of new user interface paradigms using haptics, resulting in an ongoing generation of patent applications, actively contributing to the development of new IP for us.

For the years ended December 31, 2012, 2011, and 2010, research and development expenses were $8.4 million, $8.4 million, and $8.7 million respectively.

9

Table of Contents

Intellectual Property

We believe that IP protection is crucial to our business. We rely on a combination of patents, copyrights, trade secrets, trademarks, nondisclosure agreements with employees and third parties, licensing arrangements, and other contractual agreements with third parties to protect our IP. We maintain and support an active program to protect our intellectual property, primarily through the filing of patent applications and the defense of issued patents against infringement.

Our failure to obtain or maintain adequate protection for our IP rights for any reason could hurt our competitive position. There is no guarantee that patents will be issued from the patent applications that we have filed or may file. Our issued patents may be challenged, invalidated, or circumvented, and claims of our patents may not be of sufficient scope or strength, or issued in the proper geographic regions, to provide meaningful protection or any commercial advantage.

At the end of 2012, we and our wholly owned subsidiaries had over 1,300 currently issued or pending patents in the U.S. and other countries that cover various aspects of our technologies. Some of our U.S. patents have begun to expire starting in 2007. We amortize our patents over their estimated useful lives, generally 10 years.

Investor Information

You can access financial and other information in the Investor Relations section of our Web site at www.immersion.com. We make available, on our Web site, free of charge, copies of our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after filing such material electronically or otherwise furnishing it to the SEC.

The charters of our audit committee, our compensation committee, and our nominating/corporate governance committee, and our Code of Business Conduct and Ethics (including code of ethics provisions that apply to our principal executive officer, principal financial officer, controller, and senior financial officers) are also available at our Web site under “Corporate Governance.” These items are also available to any stockholder who requests them by calling +1 408.467.1900.

The SEC maintains an Internet site that contains reports, proxy, and information statements, and other information regarding issuers that file electronically with the SEC at www.sec.gov.

Employees

As of December 31, 2012, we had 94 full-time and part-time employees, including 47 in research and development, 18 in sales and marketing, and 29 in legal, finance, and administration. We also use independent contractors. None of our employees are represented by a labor union, and we consider our employee relations to be positive.

Executive Officers

The following table sets forth information regarding our executive officers as of March 1, 2013.

10

Table of Contents

Victor Viegas has served as Chief Executive Officer since October 2009 and as a member of the Board of Directors since October 2002. Mr. Viegas was our Chief Executive Officer from October 2002 through April 2008, and President from February 2002 through April 2008. Mr. Viegas was also Chairman of the Board of Directors from October 2007 to February 2009, and assumed the role of interim Chief Financial Officer from December 2011 through May 2012. Mr. Viegas also served as Chief Financial Officer until February 2005, having joined us in August 1999 as Chief Financial Officer, Vice President, Finance. From June 1996 to August 1999, he served as Vice President, Finance and Administration and Chief Financial Officer of Macrovision Corporation, a developer and licensor of video and software copy protection technologies. From October 1986 to June 1996, he served as Vice President of Finance and Chief Financial Officer of Balco Incorporated, a manufacturer of advanced automotive service equipment. He holds a B.S. in Accounting and an M.B.A. from Santa Clara University. Mr. Viegas is also a Certified Public Accountant (inactive) in the State of California.

Dennis Sheehan assumed the role as Immersion’s SVP of Sales & Marketing, responsible for leading all sales, product & corporate marketing activities for Immersion’s TouchSense solutions and technology licenses, in October 2012. Previously, Mr. Sheehan was our Vice President of Marketing from January 2009 to October 2012. Prior to joining Immersion, Mr. Sheehan was the Senior Director of Product Management at SiRF technology, a leading supplier of GPS semiconductor solutions for mobile phones and personal navigation devices from June 2006 to December 2009. From March 2005 to November 2005, Mr. Sheehan was the Vice President of Business Development and Strategy for Varatouch, an IP components and software company. Earlier in his career, Mr. Sheehan held various marketing and management positions at Intel. He holds a B.S. in Chemical Engineering from Stanford University and an M.B.A. from Northwestern University’s Kellogg School of Management.

Paul Norris joined Immersion as Chief Financial Officer in May 2012. Prior to joining Immersion, Mr. Norris served as a partner at Accanto Partners, LLC, an investment fund focusing on technology and digital media companies from July 2011 to May 2012. Prior to that, from June 2005 to February 2011, Mr. Norris served in various executive positions at Sonic Solutions, a digital media software and entertainment solutions provider, acting as its Senior Vice President and General Counsel from June 2005 to February 2008, and its Executive Vice President, Chief Financial Officer and General Counsel February 2008 until its acquisition by Rovi Corporation, a digital entertainment technology solutions provider in February 2011. From February 2011 through June 2011, Mr. Norris assisted Rovi in its integration activities as an Executive Advisor. Mr. Norris, holds a Bachelor of Arts from Yale University and a Juris Doctor degree from Harvard Law School.

Item 1A.  Risk Factors

You should carefully consider the following risks and uncertainties, as well as other information in this report and our other SEC filings, in considering our business and prospects. If any of the following risks or uncertainties actually occurs, our business, financial condition, or results of operations could be materially adversely affected. The following risks and uncertainties are not the only ones facing us. Additional risks and uncertainties of which we are unaware or that we currently believe are immaterial could also materially adversely affect our business, financial condition, or results of operations. In any case, the trading price of our common stock could decline, and you could lose all or part of your investment. See also the Forward-looking Statements discussion in Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

11

Table of Contents

Company Risks

If we are unable to enter into new licensing arrangements with our existing licensees and with additional third-party manufacturers for our touch-enabling technologies, our royalty revenue may not grow and could decline.

Our revenue growth is largely dependent on our ability to enter into new licensing arrangements. Our failure to enter into new or renewed licensing arrangements will cause our operating results to suffer. We face numerous risks in obtaining new or renewed licenses on terms consistent with our business objectives and in maintaining, expanding, and supporting our relationships with our current licensees. These risks include:

A limited number of customers account for a significant portion of our revenue, and the loss of major customers could harm our operating results.

One customer accounted for approximately 24% of our total revenues for the year ended December 31, 2012. Two customers accounted for approximately 33% and 24% of our total revenues for the years ended December 31, 2011 and 2010, respectively. We cannot be certain that customers that have accounted for significant revenue in past periods, individually or as a group, will continue to generate revenue in any future period. If we fail to renew or lose a major customer or group of customers, our revenue could decline if we are unable to replace the lost revenue with revenue from other sources.

12

Table of Contents

Future revenue is difficult to predict for several reasons, and our failure to predict revenue accurately may cause our results to be below our expectations or those of analysts and result in our stock price declining.

Our lengthy and costly license negotiation cycle and any IP litigation that we may engage in make our future revenue difficult to predict because we may not be successful in entering into or renewing licenses with our customers on our estimated timelines, and we may be reliant on litigation timelines, which are difficult to control for any results or settlements.

While some of our license agreements provide for fixed royalty payments, many of our license agreements provide for per-unit royalties, and may also be subject to adjustments based on volume. The sales volume and prices of our licensees’ products in any given period can be difficult to predict. As a result, our actual results may differ substantially from analyst estimates or our forecasts in any given period.

In addition, a portion of our revenue comes from development and support services provided to our licensees, or may be part of a contractual arrangement involving multiple elements. Depending upon the nature of the services or elements, all or a portion of the revenue may be recognized ratably over the support period or length of the contract, may be recognized according to the proportional performance accounting method under accounting principles generally accepted in the United States of America (“GAAP”), or may be deferred in part or in whole. Contract revenue accounting may result in deferral of the service fees to the completion of the contract or may cause the services fees to be recognized over the period in which services are performed on a proportional performance basis and, therefore, product development schedules for these projects may be changed or delayed.

All of these factors make it difficult to predict future licensing revenue and may result in our revenue being below our previously announced guidance or analysts’ estimates, which would likely cause our stock price to decline.

We are currently involved in litigation and administrative proceedings involving some of our key patents; any invalidation or limitation of the scope of our key patents could significantly harm our business.

As more fully described under “Legal Proceedings,” we are currently involved in litigation involving some of our patents. The parties in these legal actions have challenged the validity, scope, enforceability and ownership of our patents. In addition, reexamination requests have been filed in the U.S. Patent and Trademark Office (“PTO”) with respect to patent claims at issue in our litigation proceedings. Under a reexamination proceeding and upon completion of the proceeding, the PTO may leave a patent in its present form, narrow the scope of the patent or cancel some or all of the claims of the patent. We are currently asserting these patents and patent claims in litigation. If some or all of the claims of the patents that are subject to reexamination are canceled, our business may be significantly harmed.

We cannot predict the outcome of the litigation or reexaminations. If there is an adverse ruling in any legal or administrative proceeding relating to the infringement, validity, enforceability or ownership of any of our patents, or if a court or an administrative body such as the PTO limits the scope of the claims of any of our patents, we could be prevented from enforcing or earning future revenues from those patents, and the likelihood that customers will take new licenses and that current licensees will continue to agree to pay under their existing licenses could be significantly reduced. The resulting reduction in license fees and royalties could significantly harm our business, consolidated financial position, results of operations or cash flows, or the trading price of our common stock.

Furthermore, regardless of the merits of any claim, the continued maintenance of these legal and administrative proceedings may result in substantial legal expenses and diverts our management’s time and attention away from our other business operations, which could significantly harm our business. The time to resolution and complexity of our litigation, its disproportionate importance to our business compared to other companies, the propensity for delay in patent litigation, and the potential that we may lose particular motions as

13

Table of Contents

well as the overall litigation all could cause significant volatility in our stock price and materially adversely affect our business and consolidated financial position, results of operations and cash flows.

The terms in our agreements may be construed by our licensees in a manner that is inconsistent with the rights that we have granted to other licensees, or in a manner that may require us to incur substantial costs to resolve conflicts over license terms.

We have entered into, and we expect to continue to enter into, agreements pursuant to which our licensees are granted rights to our technology and under our IP. These rights may be granted in certain fields of use, or with respect to certain market sectors or product categories, and may include exclusive rights or sublicensing rights. We refer to the license terms and restrictions in our agreements, including, but not limited to, field of use definitions, market sector, and product category definitions, collectively as “License Provisions.”

Due to the continuing evolution of market sectors, product categories, and licensee business models, and to the compromises inherent in the drafting and negotiation of License Provisions, our licensees may, at some time during the term of their agreements with us, interpret License Provisions in their agreements in a way that is different from our interpretation of such License Provisions, or in a way that is in conflict with the rights that we have granted to other licensees. Such interpretations by our licensees may lead to claims that we have granted rights to one licensee that are inconsistent with the rights that we have granted to another licensee. Many of our customers report royalties to us based on their shipments or their revenues and their interpretation and allocation of contracted royalty rates. It is possible that the originally reported royalties could differ materially from those determined by either a customer self-reported correction or from an audit we have performed. These interpretations may also cause disagreements arising during customer audits, may lead to claims or litigation of those claims, and may have an adverse affect on the results of our operations. Further, although our agreements generally give us the right to audit books and records of our licensees, audits can be expensive, time consuming, and may not be cost justified based on our understanding of our licensees’ businesses. Pursuant to our license compliance program, we audit certain licensees to review the accuracy of the information contained in their royalty reports in an effort to decrease the likelihood that we will not receive the royalty revenues to which we are entitled under the terms of our license agreements, but we cannot give assurances that such audits will be effective.

In addition, after we enter into an agreement, it is possible that markets and/or products, or legal and/or regulatory environments, will evolve in a manner that we did not foresee or was not foreseeable at the time we entered into the agreement. As a result, in any agreement, we may have granted rights that will preclude or restrict our exploitation of new opportunities that arise after the execution of the agreement.

Competing technologies may harm our business.

Our biggest source of competition derives from decisions made by internal design groups at our OEM customers and potential OEM customers. We expect that these internal design groups will continue to make choices regarding whether to implement haptics or not, whether to use our solutions or other standard haptic capability (i.e., Android), or even whether to develop their own haptic solutions. In the instances where the design team elects not to use our solution but implements some type of unlicensed haptic capability, we will seek to enforce our IP. If the OEM is unwilling to enter into a license agreement, we may elect to pursue litigation which would harm our relationship with the OEM and could harm our relationships with other licensees or our ability to gain new customers, who may postpone licensing decisions pending the outcome of the litigation or dispute, or who may, as a result of such litigation, choose not to adopt our technologies. In addition, these legal proceedings could be very expensive and will have a negative impact on our financial results.

In the event we have granted or grant a license to our patent portfolio to an OEM, its internal design group may design technology that is less expensive to implement or that enables products with higher performance or additional features. Many of these groups have substantially greater resources, greater financial strength and lower cost structures which may allow them to undercut our price. They also have the inherent advantage of

14

Table of Contents

access to internal corporate strategies, technology roadmaps and technical information. As a result, they may be able to bring alternative solutions to market more easily and quickly.

In some cases, the OEM may elect not to include haptics in its products due to the higher bill of materials costs associated with incorporating haptics.

In addition to licensing OEMs directly, our business also includes licensing to semiconductor manufacturers who incorporate certain of our lower tiered technology in their integrated circuits for use in certain electronic devices. While our relationships with these semiconductor manufacturers increases our distribution channels by leveraging their sales channels, it is possible that OEMs may elect to implement haptics using the integrated circuit lower-tiered solution rather than our higher-end solutions which may negatively impact our financial results.

Winning business is subject to a competitive selection process that can be lengthy and requires us to incur significant expense, and we may not be selected.

Our primary focus is on winning competitive bid selection processes, known as “design wins,” so that haptics will be included in our customers’ products. These selection processes can be lengthy and can require us to incur significant design and development expenditures. We may not win the competitive selection process and may never generate any revenue despite incurring significant design and development expenditures. Because we typically focus on only a few customers in a product area, the loss of a design win can sometimes result in our failure to have haptics added to new generation products in that area. This can result in lost sales and could hurt our position in future competitive selection processes to the extent we are not be perceived as being a technology leader.

After winning a product design for one of our customers, we may still experience delays in generating revenue from our products as a result of the lengthy development and design cycle. In addition, a change, delay or cancellation of a customer’s plans could significantly adversely affect our financial results, as we may have incurred significant expense and generated no revenue. Finally, if our customers fail to successfully market and sell their products it could materially adversely affect our business, financial condition, and results of operations.

Automobiles and medical devices incorporating our touch-enabling technologies are subject to lengthy product development periods, making it difficult to predict when and whether we will receive automotive and medical devices royalties.

The product development process for automobiles and medical devices is very lengthy, sometimes longer than four years. We may not earn royalty revenue on our automotive/medical devices technologies unless and until products featuring our technologies are shipped to customers, which may not occur until several years after we enter into an agreement with a manufacturer or a supplier to a manufacturer. Throughout the product development process, we face the risk that a manufacturer or supplier may delay the incorporation of, or choose not to incorporate, our technologies into its products, making it difficult for us to predict the royalties we may receive, if any. After the product launches, our royalties still depend on market acceptance of the vehicle, the option packages if our technology is an option (for example, a navigation unit), or medical device, which is likely to be determined by many factors beyond our control.

We have little or no control or influence on our licensees’ design, manufacturing, quality control, promotion, distribution, or pricing of their products incorporating our touch-enabling technologies, upon which we generate royalty revenue.

A key part of our business strategy is to license our IP to companies that manufacture and sell products incorporating our touch-enabling technologies. Sales of those products generate royalty and license revenue for us. For the years ended December 31, 2012, 2011, and 2010, 93%, 88% and 75%, respectively, of our total revenues were royalty and license revenues. We do not control or influence the design, manufacture, quality

15

Table of Contents

control, promotion, distribution, or pricing of products that are manufactured and sold by our licensees, nor can we control consolidation within an industry which could either reduce the number of licensing products available or reduce royalty rates for the combined licensees. In addition, we generally do not have commitments from our licensees that they will continue to use our technologies in current or future products. As a result, products incorporating our technologies may not be brought to market, achieve commercial acceptance, or otherwise generate meaningful royalty revenue for us. For us to generate royalty revenue, licensees that pay us per-unit royalties must manufacture and distribute products incorporating our touch-enabling technologies in a timely fashion and generate consumer demand through marketing and other promotional activities. If our licensees’ products fail to achieve commercial success or if products are recalled because of quality control problems or if our licensees do not ship products incorporating our touch-enabling technologies in a timely fashion or fail to achieve strong sales, our revenues will not grow and could decline.

We had an accumulated deficit of $112 million as of December 31, 2012, have a history of losses, and may not achieve or maintain profitability in the future.

Since 1997, we have incurred losses in all but six quarters. As of December 31, 2012, we had an accumulated deficit of $112 million. We need to generate significant ongoing revenue to achieve and maintain consistent profitability. We anticipate that we will continue to incur expenses as we:

If our revenues grow more slowly than we anticipate or if our operating expenses exceed our expectations, we may not achieve or maintain profitability.

We have limited engineering, customer service, technical support, quality assurance and operations resources to design and fulfill favorable product delivery schedules and to provide support of our different product areas. Products and services may not be delivered in a timely way, with sufficient levels of quality, or at all, which may reduce our revenue.

We deploy our limited engineering, customer service, technical support, quality assurance, and operations resources on a variety of different projects and programs intended to provide sufficient levels of quality necessary for channels and customers. Our success in various markets may depend on timely deliveries and overall levels of sustained quality and customer service. Our failure to provide favorable product and program deliverables and quality and customer service levels, or provide them at all, may disrupt channels and customers, harm our brand, and reduce our revenues.

Our business depends in part on access to third-party platforms or technologies, and if the access is withdrawn, denied, or is not available on terms acceptable to us, or if the platforms or technologies change without notice to us, our business and operating results could be adversely affected.

Many of our current and future products are designed for use with third-party platforms or technologies. Our business in these categories relies on our access to the platforms or technologies of third parties, which can be withdrawn, denied or not be available on terms acceptable to us.

16

Table of Contents

Our access to third-party platforms or technologies may require paying a royalty, which lowers our product margins, or may otherwise be on terms that are not acceptable to us. In addition, the third-party platforms or technologies used to interact with our product portfolio can be delayed in production or can change without prior notice to us, which can result lost sales or lower margins.

If we are unable to access third-party platforms or technologies, or if our access is withdrawn, denied, or is not available on terms acceptable to us, or if the platforms or technologies are delayed or change without notice to us, our business and operating results could be adversely affected.

Because we have a fixed payment license with Microsoft, our royalty revenue from licensing in the gaming market and other consumer markets has previously declined and may further do so if Microsoft increases its volume of sales of touch-enabled products at the expense of our other licensees.

Under the terms of our present agreement with Microsoft, Microsoft receives a royalty-free, perpetual, irrevocable license (including sublicense rights) to our worldwide portfolio of patents. This license permits Microsoft to make, use, and sell hardware, software, and services, excluding specified products, covered by our patents. We will not receive any further revenues or royalties from Microsoft under our current agreement with Microsoft. Microsoft has a significant share of the market for touch-enabled console gaming computer peripherals and is pursuing other consumer markets such as mobile devices and tablets. Microsoft has significantly greater financial, sales, and marketing resources, as well as greater name recognition and a larger customer base than some of our other licensees. In the event that Microsoft increases its share of these markets, our royalty revenue from other licensees in these market segments may decline.

The market for certain touch-enabling technologies and touch-enabled products is at an early stage and if market demand does not develop, we may not achieve or sustain revenue growth.

The market for certain of our touch-enabling technologies and certain of our licensees’ touch-enabled products is at an early stage. If we and our licensees are unable to develop demand for our touch-enabling technologies and touch-enabled products, we may not achieve or sustain revenue growth. We cannot accurately predict the growth of the markets for these technologies and products, the timing of product introductions, or the timing of commercial acceptance of these products.

Even if our touch-enabling technologies and our licensees’ touch-enabled products are ultimately widely adopted, widespread adoption may take a long time to occur. The timing and amount of royalties and product sales that we receive will depend on whether the products marketed achieve widespread adoption and, if so, how rapidly that adoption occurs.

We expect that we will need to pursue extensive and expensive marketing and sales efforts to educate prospective licensees, component customers, and end users about the uses and benefits of our technologies and to persuade software developers and content producers to create products that utilize our technologies. Negative product reviews or publicity about our company, our technologies, our licensees’ products, haptic features, or haptic technology in general could have a negative impact on market adoption, our revenue, and/or our ability to license our technologies in the future.

We may not be able to continue to derive significant revenues from makers of peripherals for popular video gaming platforms.

A significant portion of our gaming royalty revenues come from third-party peripheral makers who make licensed gaming products designed for use with popular video game console systems from Microsoft, Sony, and Nintendo. Video game console systems are closed, proprietary systems, and video game console system makers typically impose certain requirements or restrictions on third-party peripheral makers who wish to make peripherals that will be compatible with a particular video game console system. If third-party peripheral makers cannot or are not allowed to obtain or satisfy these requirements or restrictions, our gaming royalty revenues

17

Table of Contents

could be significantly reduced. Furthermore, should a significant video game console maker choose to omit touch-enabling capabilities from its console systems or somehow restrict or impede the ability of third parties to make touch-enabling peripherals, it may very well lead our gaming licensees to stop making products with touch-enabling capabilities, thereby significantly reducing our gaming royalty revenues. Also, if the gaming industry changes such that mobile or other platforms increase in popularity at the expense of traditional video game consoles, our gaming royalty revenues could be substantially reduced if we are unable to enter into replacement arrangements enabling us to license our IP in connection with gaming on such mobile or other platforms.

If we fail to protect and enforce our IP rights, our ability to license our technologies and generate revenues would be impaired.

Our business depends on generating revenues by licensing our IP rights and by customers selling products that incorporate our technologies. We rely on our significant patent portfolio to protect our proprietary rights. If we are not able to protect and enforce those rights, our ability to obtain future licenses or maintain current licenses and royalty revenue could be impaired. In addition, if a court or patent office were to limit the scope, declare unenforceable, or invalidate any of our patents, current licensees may refuse to make royalty payments, or they may choose to challenge one or more of our patents. It is also possible that:

In addition, our patents will continue to expire according to their terms, with expiration dates starting in 2007. Our failure to continuously develop or acquire successful innovations and obtain patents on those innovations could significantly harm our business, financial condition, results of operations, or cash flows.

We also rely on licenses, confidentiality agreements, other contractual agreements, and copyright, trademark, and trade secret laws to establish and protect our proprietary rights. It is possible that:

Our business may suffer if third parties assert that we violate their IP rights.

Third parties have previously claimed and may in the future claim that we or our customers are infringing upon their IP rights. Even if we believe that such claims are without merit, they can be time-consuming and costly to defend against and will divert management’s attention and resources away from our business. Furthermore, third parties making such claims may be able to obtain injunctive or other equitable relief that could block our ability to further develop or commercialize some or all of our products or services in the U.S. and abroad. Claims of IP infringement also might require us to enter into costly settlement or license agreements or pay costly damage awards. Even if we have an agreement that provides for a third party to indemnify us against such costs, the indemnifying party may be unable or unwilling to perform its contractual obligations under the agreement.

We have acquired patents from third parties and also license some technologies from third parties. We must rely upon the owners of the patents or the technologies for information on the origin and ownership of the acquired or licensed technologies. As a result, our exposure to infringement claims may increase. We generally obtain representations as to the origin and ownership of acquired or licensed technologies and indemnification to cover any breach of these representations. However, representations may not be accurate and indemnification

18

Table of Contents

may not provide adequate compensation for breach of the representations. If we cannot or do not license the infringed IP at all or on reasonable terms, or substitute similar technology from another source, our business, financial position, results of operations or cash flows could suffer.

Recent changes to U.S. patent laws and proposed changes to the rules of the U.S. PTO may adversely impact our business.

Our business relies in part on the uniform and historically consistent application of U.S. patent laws and regulations. There are numerous recent changes to the patent laws and proposed changes to the rules of the PTO, which may have a significant impact on our ability to protect our technology and enforce our IP rights. For example, on September 16, 2011, President Obama signed the Leahy-Smith America Invents Act which codifies significant changes to the U.S. patent laws, including, among other things, changing from a “first to invent” to a “first inventor to file” system, limiting where a patentee may file a patent suit, requiring the apportionment of patent damages, replacing interference proceedings with derivation actions and creating a post-grant opposition process to challenge patents after they have been issued. The effects of these changes on our patent portfolio and business have yet to be determined, as the PTO must still implement regulations relating to these changes and the courts have yet to address the new provisions. In addition, in recent years, the courts have interpreted U.S. patent laws and regulations differently, and in particular the U.S. Supreme Court has decided a number of patent cases and continues to actively review more patent cases than it has in the past. Some of these changes or potential changes may not be advantageous for us, and may make it more difficult to obtain adequate patent protection or to enforce our patents against parties using them without a license or payment of royalties. These changes or potential changes could increase the costs and uncertainties surrounding the prosecution of our patent applications and the enforcement or defense of our patent rights, and could have a deleterious effect on our licensing program and, therefore, the royalties we can collect.

If we fail to develop new or enhanced technologies for new applications and platforms, we may not be able to create a market for our technologies or our technologies may become obsolete, and our ability to grow and our results of operations might be harmed.

We derive a significant portion of our revenues from licenses and royalties from a relatively small number of key technologies. We devote significant engineering resources to develop new technologies to address the evolving needs of our customers. To remain competitive, we must introduce new technologies in a timely manner and the market must adopt them. Our initiatives to develop new and enhanced technologies and to commercialize these technologies for new applications and new platforms may not be successful or timely. Any new or enhanced technologies, such as our Integrator product, may not be favorably received by our licensees or consumers and could damage our reputation or our brand. Expanding our technologies could also require significant additional expenses and strain our management, financial, and operational resources.

Moreover, technology products generally have relatively short product life cycles and our current technologies may become obsolete in the future. Our ability to achieve revenue growth also depends on our continuing ability to improve and reduce the cost of our technologies, to improve their ease of integration in both hardware and software, and to introduce these technologies to the marketplace in a timely manner. If our development efforts are not successful or are significantly delayed, companies may not incorporate our technologies into their products and our revenues may not grow and could decline.

The higher cost of products incorporating our touch-enabling technologies may inhibit or prevent their widespread adoption.

Mobile devices, tablets, touchscreens, personal computer and console gaming peripherals, and automotive and industrial controls incorporating our touch-enabling technologies can be more expensive than similar competitive products that are not touch-enabled. Although many OEMS have licensed our technologies, there is generally no commitment on their part to use our technologies in their devices. The greater expense of development and production of products containing our touch-enabling technologies, together with the higher price to the end customer, may be a significant barrier to their widespread adoption and sale.

19

Table of Contents

If we are unable to develop open source compliant products, our ability to license our technologies and generate revenues would be impaired.

We have seen, and believe that we will continue to see, an increase in customers requesting that we develop products that will operate in an “open source” environment. Developing open source compliant products, without imperiling the IP rights upon which our licensing business depends, may prove difficult under certain circumstances, thereby placing us at a competitive disadvantage for new product designs. As a result, our revenues may not grow and could decline.

The uncertain economic environment could reduce our revenues and could have an adverse effect on our financial condition and results of operations.

The current economic conditions could materially hurt our business in a number of ways, including longer sales and renewal cycles, delays in adoption of our products or technologies, increased risk of competition, higher overhead costs as a percentage of revenue, delays in signing or failing to sign customer agreements, or signing customer agreements with reduced royalty rates. In addition, our customers, potential customers, and business partners are facing similar challenges, which could materially and adversely affect the level of business they conduct with us or in the level of sales of products that include our technology.

Our international expansion efforts subject us to additional risks and costs.

We currently have sales personnel in Finland, Japan, Korea, Switzerland, Taiwan and China and we intend to expand our international activities. International operations are subject to a number of difficulties and special costs, including:

Our international operations could also increase our exposure to international laws and regulations. If we cannot comply with foreign laws and regulations, which are often complex and subject to variation and unexpected changes, we could incur unexpected costs and potential litigation. For example, the governments of foreign countries might attempt to regulate our products or levy sales or other taxes relating to our activities. In addition, foreign countries may impose tariffs, duties, price controls, or other restrictions on foreign currencies or trade barriers, any of which could make it more difficult for us to conduct our business. Our international operations could also increase our exposure to complex international tax rules and regulations. Changes in, or interpretations of, tax rules and regulations may adversely affect our income tax provision. In addition, our operations outside the U.S. may be affected by changes in trade protection laws, policies and measures, and other regulatory requirements affecting trade and investment, including the Foreign Corrupt Practices Act and local laws prohibiting corrupt payments by our employees, vendors, or agents.

20

Table of Contents

We might be unable to retain or recruit necessary personnel, which could slow the development and deployment of our technologies.

Our technologies are complex and we rely upon the continued service of our existing personnel to support licensees, enhance existing technologies, and develop new technologies. Accordingly, our ability to develop and deploy our technologies and to sustain our revenue growth depends upon the continued service of our management and other key personnel, many of whom would be difficult to replace. Furthermore, we believe that there are a limited number of engineering and technical personnel that are experienced in haptics. Management and other key employees may voluntarily terminate their employment with us at any time upon short notice. The loss of management or key personnel could delay product development cycles or otherwise harm our business.

We believe that our future success will also depend largely on our ability to attract, integrate, and retain sales, support, marketing, and research and development personnel. Competition for such personnel is intense, and we may not be successful in attracting, integrating, and retaining such personnel. Given the protracted nature of, if, how, and when we collect royalties on new design contracts, it may be difficult to craft compensation plans that will attract and retain the level of salesmanship needed to secure these contracts. Additionally some of our executive officers and key employees hold stock options with exercise prices above the current market price of our common stock or that are largely vested. Each of these factors may impair our ability to retain the services of our executive officers and key employees.

Our current litigation is expensive, disruptive, and time consuming, and will continue to be, until resolved, and regardless of whether we are ultimately successful, could adversely affect our business.

We have been in the past and are currently a party to various legal proceedings. Due to the inherent uncertainties of litigation, we cannot accurately predict how these cases will ultimately be resolved. We anticipate that currently pending litigation will continue to be costly and that future litigation or investigations will result in additional legal expenses, and there can be no assurance that we will be successful or be able to recover the costs we incur in connection with litigation or investigations. We expense litigation and investigatory costs as incurred, and only accrue for costs that have been incurred but not paid to the vendor as of the financial statement date. Litigation and investigations have diverted, and could continue to divert, the efforts and attention of some of our key management and personnel. As a result, until such time as it is resolved or concluded, litigation and investigations could adversely affect our business. Further, any unfavorable outcome could adversely affect our business. For additional background on this and our other litigation, please see Note 15 to the consolidated financial statements and Part I, Item 3 “Legal Proceedings”.

Product liability claims could be time-consuming and costly to defend and could expose us to loss.

Our products or our licensees’ products may have flaws or other defects that may lead to personal or other injury claims. If products that we or our licensees sell cause personal injury, property damage, financial loss, or other injury to our or our licensees’ customers, the customers or our licensees may seek damages or other recovery from us. In addition, even though we have transitioned from the medical products business, we could face product liability claims for products that we have sold or that our successors have sold or may sell in the future. Defending any claims against us, regardless of merit, would be time-consuming, expensive to defend, and distracting to management, and could result in damages and injure our reputation, the reputation of our technology, services, or products, or the reputation of our licensees or their products. This damage could limit the market for our and our licensees’ products and harm our results of operations. In addition, if our business liability insurance coverage proves inadequate or future coverage is unavailable on acceptable terms or at all, our business, operating results and financial condition could be adversely affected.

In the past, manufacturers of peripheral products including certain gaming products such as joysticks, wheels, or gamepads, have been subject to claims alleging that use of their products has caused or contributed to various types of repetitive stress injuries, including carpal tunnel syndrome. While we have not experienced any product liability claims to date, we could face such claims in the future, which could harm our business and

21

Table of Contents

reputation. Although our license agreements typically contain provisions designed to limit our exposure to product liability claims, existing or future laws or unfavorable judicial decisions could limit or invalidate the provisions.

Our technologies are complex and may contain undetected errors, which could harm our reputation and future sales.

Any failure to provide high quality and reliable technologies, whether caused by our own failure or failures of our suppliers or OEM customers, could damage our reputation and reduce demand for our technologies. Our technologies have in the past contained, and may in the future contain, undetected errors or defects. Some errors in our technologies may only be discovered after a customer’s product incorporating our technologies has been shipped to customers. Any errors or defects discovered in our technologies after commercial release could result in product recalls, loss of revenue, loss of customers, and increased service and warranty costs, any of which could adversely affect our business.

Our customers may have difficulties obtaining the components necessary to manufacture haptic-based products, which could harm our business and results of operations.

In order to manufacture haptic-based products, our customers require components such as actuators and amplifiers. The inability of suppliers to deliver adequate supplies of these components could disrupt our customers’ production processes which would harm our business and results of operations. In addition, our newer products require new types of components that we expect will be developed and sold by our ecosystem partners. Failure of our ecosystem partners to bring these products to market in a timely fashion, with appropriate levels of quality, and at attractive prices may affect our ability to secure customers for these newer products which could harm our business and results of operations. Component suppliers to customers could also be affected by natural disasters and other similar events.

Catastrophic events, such as natural disasters, war, and acts of terrorism could disrupt the business of our customers, which could harm our business and results of operations.

The production processes and operations of our customers are susceptible to the occurrence of catastrophic events, such as natural disasters, war, and acts of terrorism, all of which are outside of our control. Any such events could cause a serious business disruption to our customers’ ability to manufacture, distribute and sell products incorporating our touch-enabling technologies, which may adversely affect our business and results of operation.

If our facilities were to experience catastrophic loss, our operations would be seriously harmed.

Our facilities could be subject to a catastrophic loss such as fire, flood, earthquake, power outage, or terrorist activity. A substantial portion of our research and development activities, operations, our corporate headquarters, and other critical business operations are located near major earthquake faults in San Jose, California, an area with a history of seismic events. An earthquake at or near our facilities could disrupt our operations and result in large expenses to repair and replace the facility. While we believe that we maintain insurance sufficient to cover most long-term potential losses at our facilities, our existing insurance may not be adequate for all possible losses.

If we fail to establish and maintain proper and effective internal controls, our ability to produce accurate financial statements on a timely basis could be impaired, which would adversely affect our consolidated operating results, our ability to operate our business and our stock price.

We have in the past had material weaknesses in our internal control over financial reporting. Ensuring that we have adequate internal financial and accounting controls and procedures in place to produce accurate financial statements on a timely basis is a costly and time-consuming effort that needs to be re-evaluated frequently. Any

22

Table of Contents

failure on our part to remedy identified material weaknesses, or any additional delays or errors in our financial reporting, could cause our financial reporting to be unreliable and could have a material adverse effect on our business, results of operations, or financial condition and could have a substantial adverse impact on the trading price of our common stock.

We do not expect that our internal control over financial reporting will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that misstatements due to error or fraud will not occur or that all control issues and instances of fraud, if any, within our company will have been detected.

The nature of some of our products may also subject us to export control regulation by the U.S. Department of State and the Department of Commerce. Violations of these regulations can result in monetary penalties and denial of export privileges.

Our sales to customers or sales by our customers to their end customers in some areas outside the United States could be subject to government export regulations or restrictions that prohibit us or our licensees from selling to customers in some countries or that require us to obtain licenses or approvals to export such products internationally. Delays or denial of the grant of any required license or approval, or changes to the regulations, could make it difficult or impossible to make sales to foreign customers in some countries and could adversely affect our revenue. In addition, we could be subject to fines and penalties for violation of these export regulations if we were found in violation. Such violation could result in penalties, including prohibiting us from exporting our products to one or more countries, and could materially and adversely affect our business.

Investment Risks

Our quarterly revenues and operating results are volatile, and if our future results are below the expectations of public market analysts or investors, the price of our common stock is likely to decline.

Our revenues and operating results are likely to vary significantly from quarter to quarter due to a number of factors, many of which are outside of our control and any of which could cause the price of our common stock to decline.

These factors include:

23

Table of Contents

Changes in financial accounting standards or practices may cause adverse, unexpected financial reporting fluctuations and affect our reported results of operations.

A change in accounting standards or practices can have a significant effect on our reported results and may even affect our reporting of transactions completed before the change is effective. New accounting pronouncements and varying interpretations of accounting pronouncements have occurred and may occur in the future. Changes to existing rules or the questioning of current practices may adversely affect our reported financial results or the way we conduct our business.

Our business is subject to changing regulations regarding corporate governance and other compliance areas that will increase both our costs and the risk of noncompliance.

As a public company, we are subject to the reporting requirements of the Exchange Act, the Sarbanes-Oxley Act of 2002, the Dodd-Frank Wall Street Reform and Consumer Protection Act, and the rules and regulations of The NASDAQ Stock Market. The requirements of these rules and regulations have increased and we expect will continue to increase our legal, accounting and financial compliance costs, will make some activities more difficult, time-consuming and costly, and may also place undue strain on our personnel, systems and resources.

Additionally, the SEC has promulgated final rules in connection with the Dodd-Frank Wall Street Reform and Consumer Protection Act, regarding disclosure of the use of certain minerals, known as conflict minerals, that are mined from the Democratic Republic of the Congo and adjoining countries. The metals covered by the rules include tin, tantalum, tungsten, and gold. The rules require us to conduct a reasonable country of origin inquiry to determine if we know or have reason to believe any of the minerals used in the production process may have originated from the Democratic Republic of the Congo or an adjoining country. If we are not able to determine the minerals did not originate from a covered country, we would be required to perform supply chain due diligence on members of our supply chain. These new requirements may also reduce the number of suppliers who provide conflict free metals, and may affect our, our customers’ or our manufactures’ ability to obtain products in sufficient quantities or at competitive prices. Compliance costs and the unavailability of raw materials could have a material adverse effect on our results of operations.

Our stock price may fluctuate regardless of our performance.

The stock market has experienced extreme volatility that often has been unrelated or disproportionate to the performance of particular companies. These market fluctuations may cause our stock price to decline regardless of our performance. The market price of our common stock has been, and in the future could be, significantly affected by factors such as: actual or anticipated fluctuations in operating results; announcements of technical innovations; announcements regarding litigation in which we are involved; changes by game console manufacturers to not include touch-enabling capabilities in their products; new products or new contracts; sales or the perception in the market of possible sales of large number of shares of our common stock by insiders or others; stock repurchase activity; changes in securities analysts’ recommendations; personnel changes; changing circumstances regarding competitors or their customers; governmental regulatory action; developments with respect to patents or proprietary rights; inclusion in or exclusion from various stock indices; and general market conditions. In the past, following periods of volatility in the market price of a company’s securities, securities class action litigation has been initiated against that company.

Our stock repurchase program could affect our stock price and add volatility.

Any repurchases pursuant to our stock repurchase program could affect our stock price and add volatility. There can be no assurance that any repurchases will actually be made under the program, nor is there any assurance that a sufficient number of shares of our common stock will be repurchased to satisfy the market’s expectations. Furthermore, there can be no assurance that any repurchases conducted under the plan will be made at the best possible price. The existence of a stock repurchase program could also cause our stock price to be higher than it would be in the absence of such a program and could potentially reduce the market liquidity

24

Table of Contents

for our stock. Additionally, we are permitted to and could discontinue our stock repurchase program at any time and any such discontinuation could cause the market price of our stock to decline.

Provisions in our charter documents and Delaware law could prevent or delay a change in control, which could reduce the market price of our common stock.

Provisions in our certificate of incorporation and bylaws may have the effect of delaying or preventing a change of control or changes in our board of directors or management, including the following:

In addition, certain provisions of Delaware law may discourage, delay, or prevent someone from acquiring or merging with us. These provisions could limit the price that investors might be willing to pay in the future for shares.

We may engage in acquisitions that could dilute stockholders’ interests, divert management attention, or cause integration problems.

As part of our business strategy, we have in the past and may in the future, acquire businesses or IP that we feel could complement our business, enhance our technical capabilities, or increase our IP portfolio. The pursuit of potential acquisitions may divert the attention of management and cause us to incur various expenses in identifying, investigating, and pursuing suitable acquisitions, whether or not they are consummated.

If we consummate acquisitions through the issuance of our securities, our stockholders could suffer significant dilution. Acquisitions could also create risks for us, including:

25

Table of Contents

Any acquisitions, even if successfully completed, might not generate significant additional revenue or provide any benefit to our business.

As our business grows, such growth may place a significant strain on our management and operations and, as a result, our business may suffer.

We plan to continue expanding our business, and any significant growth could place a significant strain on our management systems, infrastructure and other resources. We will need to continue to invest the necessary capital to upgrade and improve our operational, financial and management reporting systems. If our management fails to manage our growth effectively, we could experience increased costs, declines in product quality, and/or customer satisfaction, which could harm our business.

Item 1B.  Unresolved Staff Comments

None.

Item 2.  Properties

We lease a facility in San Jose, California of approximately 33,000 square feet, which serves as our corporate headquarters and includes our sales, marketing, administration, research and development, and distribution operations functions. The lease for this property expires in December 2016 and we have an option to renew through December 2021.

We lease a facility in Montreal, Quebec, Canada of approximately 6,416 square feet, for our subsidiary, Immersion Canada, Inc. The facility is used for research and development and administration functions. The lease for this property expires in October 2015.

We also lease office space in Seocho-gu, Seoul, Korea; Espoo, Finland; Zhonghe City, Taipei, Taiwan; and Tokyo, Japan.

We believe that our existing facilities are adequate to meet our current needs.

Item 3.  Legal Proceedings

In re Immersion Corporation Securities Litigation

In September and October 2009, various putative shareholder class action and derivative complaints were filed in federal and state court against us and certain current and former Immersion directors and officers.

On September 2, 2009, a securities class action complaint was filed in the United States District Court for the Northern District of California against us and certain of our current and former directors and officers. Over the following five weeks, four additional class action complaints were filed. (One of these four actions was later voluntarily dismissed.) The securities class action complaints name us and certain current and former Immersion directors and officers as defendants and allege violations of federal securities laws based on our issuance of allegedly misleading financial statements. The various complaints assert claims covering the period from May 2007 through July 2009 and seek compensatory damages allegedly sustained by the purported class members.

On December 21, 2009, these class actions were consolidated by the court as In Re Immersion Corporation Securities Litigation. On the same day, the court appointed a lead plaintiff and lead plaintiff’s counsel. Following our restatement of financial statements, lead plaintiff filed a consolidated complaint on April 9, 2010. Defendants moved to dismiss the action on June 15, 2010 and that motion was granted with leave to amend on March 11, 2011. Lead plaintiff filed an amended complaint on April 29, 2011. Defendants moved to dismiss the amended complaint on July 1, 2011. On December 16, 2011, the motion to dismiss was granted with prejudice and on December 19, 2011, judgment was entered in favor of defendants. On January 13, 2012, the plaintiffs filed a

26

Table of Contents

notice of appeal to the Ninth Circuit Court of Appeals. In May 2012, plaintiff filed his opening appeals brief. On July 13, 2012, we filed our response brief. On September 4, 2012, plaintiff filed his reply.

In re Immersion Corporation Derivative Litigation

On September 15, 2009, a putative shareholder derivative complaint was filed in the United States District Court for the Northern District of California, purportedly on behalf of us and naming certain of our current and former directors and officers as individual defendants. Thereafter, two additional putative derivative complaints were filed in the same court.

The derivative complaints arise from the same or similar alleged facts as the federal securities actions and seek to bring state law causes of action on behalf of us against the individual defendants for breaches of fiduciary duty, gross negligence, abuse of control, gross mismanagement, breach of contract, waste of corporate assets, unjust enrichment, as well as for violations of federal securities laws. The federal derivative complaints seek compensatory damages, corporate governance changes, unspecified equitable and injunctive relief, the imposition of a constructive trust, and restitution. On November 17, 2009, the court consolidated these actions as In re Immersion Corporation Derivative Litigation and appointed lead counsel. On May 3, 2010, the court issued an order staying the action, and that stay was lifted following dismissal of the securities class action in December 2011. On October 31, 2012, plaintiffs filed a statement with the Court indicating that in light of the settlement of the Kasmer v. Richardson action (referenced below), they intend to voluntarily dismiss their action with prejudice once the time to appeal the Kasmer settlement approval order has expired. The parties jointly moved to dismiss the action on January 2, 2013, and the Court dismissed the action with prejudice on January 4, 2013.

Kasmer v. Immersion Corporation

On May 5, 2010, an action was filed in Delaware Chancery Court by a shareholder seeking to enforce a demand to inspect certain of our records pursuant to Section 220 of the Delaware General Corporation Law, as a possible prelude to the shareholder bringing a derivative action. We filed our answer on June 14, 2010, questioning whether a proper purpose for the records inspection had been stated and raising other defenses concerning the scope of the demand, among other deficiencies. Following a one-day trial on December 2, 2010, the Court significantly narrowed the scope of the demand and we responded accordingly. On October 24, 2011, the shareholder filed a motion seeking to compel further responses to the demand. We believe that our responses complied with the Court’s ruling and we opposed the shareholder’s motion. On May 30, 2012, the same shareholder filed a putative shareholder derivative action in San Francisco Superior Court, entitled Kasmer v. Richardson et. al. purportedly on behalf of us and naming certain of our former directors and officers as individual defendants. On June 5, 2012, the parties participated in a mediation session, and on the same day reached an agreement in principle to settle both the Delaware Chancery and Kasmer v. Richardson actions. The Delaware Chancery action was dismissed with prejudice by stipulation of the parties on October 22, 2012. The settlement of the Kasmer v. Richardson action was approved by the San Francisco Superior Court on October 26, 2012 and became final on December 29, 2012.

Immersion Corporation vs. Motorola Mobility, Inc., Motorola Mobility Holdings, Inc., HTC Corporation, HTC America Holding, Inc., HTC America, Inc., HTC (B.V.I.) Corporation, Exedea, Inc., Brightstar Corporation, and Brightpoint, Inc.

On February 7, 2012, we filed a complaint against Motorola with the U.S. International Trade Commission (the “ITC”) alleging that certain Motorola mobile electronic devices, including smartphones and cellular phones, infringe six of our patents that cover various uses of haptic effects in connection with touchscreens (the “ITC Complaint”). The ITC Complaint requests that the ITC institute an immediate investigation into Motorola’s unlicensed importation, sale for importation and/or sale after importation of mobile electronic devices, including smartphones and cellular phones, using haptic effects covered by our patents. The ITC Complaint further requests an exclusion order barring the importation, sale for importation and sale after importation of products that infringe our patents and cease and desist orders directing Motorola to cease importing, marketing,

27

Table of Contents

advertising, demonstrating, warehousing, distributing, selling, offering to sell and/or using mobile electronic devices incorporating haptic effects that infringe one or more of our patents. We amended the ITC Complaint on March 2, 2012 to add the following parties: HTC Corporation, HTC America Holding, Inc., HTC America, Inc., HTC (B.V.I.) Corporation, Exedea, Inc., Brightstar Corporation and Brightpoint, Inc. We subsequently withdrew HTC America Holding, Inc., HTC (B.V.I.) Corporation, Exedea, Brightstar, and Brightpoint from the ITC Complaint. The ITC instituted an investigation against Motorola Mobility, Inc., Motorola Mobility Holdings, Inc., HTC Corporation, and HTC America, Inc. on April 2, 2012.

On February 7, 2012, we filed a complaint against Motorola in the U.S. District Court for the District of Delaware (the “Motorola Delaware Complaint”) alleging that certain of Motorola’s mobile electronic devices, including smartphones and cellular phones, infringe six of our patents that cover various uses of haptic effects. The Motorola Delaware Complaint covers the same patents as the ITC Complaint. The Motorola Delaware Complaint seeks damages and injunctive relief. The parties stipulated to stay the case pending the completion of the ITC investigation.

On March 2, 2012, we filed a complaint against HTC Corporation, HTC America Holding, Inc., HTC America, Inc., HTC (B.V.I.) Corporation, Exedea, Inc., Brightstar Corporation and Brightpoint, Inc. (collectively, “HTC”) in the U.S. District Court for the District of Delaware (the “HTC Delaware Complaint”) alleging that certain of HTC’s mobile electronic devices, including smartphones and cellular phones, infringe six of our patents that cover various uses of haptic effects. The HTC Delaware Complaint covers the same patents as the ITC Complaint. The HTC Delaware Complaint seeks damages and injunctive relief. The parties have stipulated to stay the case pending the completion of the ITC investigation.

The ITC Complaint, Motorola Delaware Complaint and HTC Delaware Complaint assert infringement of the following patents:

U.S. Patent No 6,429,846: “Haptic Feedback for Touchpads and Other Touch Controls”

U.S. Patent No 7,592,999: “Haptic Feedback for Touchpads and Other Touch Controls”

U.S. Patent No 7,969,288: “Force Feedback System Including Multi-Tasking Graphical Host Environment and Interface Device”

U.S. Patent No 7,982,720: “Haptic Feedback for Touchpads and Other Touch Controls”

U.S. Patent No 8,031,181: “Haptic Feedback for Touchpads and Other Touch Controls”

U.S. Patent No 8,059,105: “Haptic Feedback for Touchpads and Other Touch Controls”

Motorola and HTC asserted that the patents are not infringed, invalid, and unenforceable.

On November 21, 2012, we entered into a confidential settlement agreement with Motorola. On January 15, 2013, the Administrative Law Judge issued an Initial Determination terminating the ITC investigation as to Motorola.

The hearing in the ITC investigation against HTC is scheduled to begin on March 28, 2013.

In the United States Patent Office, HTC has filed requests for ex-parte reexamination of three of Immersion’s patents: U.S. Patent No. 7,969,288 (the ’288 patent), U.S. Patent No. 7,592,999 (the ’999 patent), and U.S. Patent No. 7,982,720 (the ’720 patent). Reexamination of the ’288 patent was requested on July 30, 2012. The Patent Office granted the request on October 24, 2012. Reexamination of the ’999 patent was requested on September 6, 2012. The Patent Office granted the request on November 26, 2012. Reexamination of the ’720 patent was requested on September 10, 2012. The Patent Office granted the request on November 28, 2012. The Patent Office has not yet issued any office actions in any of these reexamination proceedings.

We cannot predict the ultimate outcome of the above-mentioned federal and state actions and reexamination proceedings, and we are unable to estimate any potential liability we may incur.

28

Table of Contents

Item 4.  Mine Safety Disclosures

Not applicable.

PART II

Our common stock is traded on the Nasdaq Global Market under the symbol “IMMR.” The following table sets forth, for the periods indicated, the high and low sales prices for our common stock on such market.

On February 25, 2013, the closing price was $6.85 per share and there were 113 holders of record of our common stock. Because many of such shares are held by brokers and other institutions on behalf of stockholders, we are unable to estimate the total number of stockholders represented by these record holders.

Issuer Repurchases of Equity Securities

Below is a summary of stock repurchases for the quarter ending December 31, 2012. See Note 10 of our consolidated financial statements for information regarding our stock repurchase program.

29

Table of Contents

Dividend Policy

We have never declared or paid any cash dividends on our common stock and we do not anticipate paying cash dividends in the foreseeable future. We currently intend to retain any earnings to fund future growth, product development, and operations.

Item 6.  Selected Financial Data

The following selected consolidated financial data is qualified in its entirety by, and should be read in conjunction with, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the consolidated financial statements and notes thereto included elsewhere in this Annual Report on Form 10-K.

(1) Results include litigation settlements, conclusions, and patent license expense of $20.8 million for 2008.

(2) During 2009, we sold all of our 3D product line. On March 30, 2010, we divested certain medical simulation product lines. See Note 11 to the consolidated financial statements.

30

Table of Contents

Item 7.  Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion should be read in conjunction with the consolidated financial statements and notes thereto.

This Management’s Discussion and Analysis of Financial Condition and Results of Operations includes forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Exchange Act, as amended. The forward-looking statements involve risks and uncertainties. Forward-looking statements are identified by words such as “anticipates,” “believes,” “expects,” “intends,” “may,” “will,” and other similar expressions. However, these words are not the only way we identify forward-looking statements. In addition, any statements, which refer to expectations, projections, or other characterizations of future events or circumstances, are forward-looking statements. Actual results could differ materially from those projected in the forward-looking statements as a result of a number of factors, including those set forth in Item 1A, “Risk Factors,” those described elsewhere in this report, and those described in our other reports filed with the SEC. We caution you not to place undue reliance on these forward-looking statements, which speak only as of the date of this report, and we undertake no obligation to release the results of any revisions to these forward-looking statements that could occur after the filing of this report.

Critical Accounting Policies and Estimates

Our discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with GAAP. The preparation of these consolidated financial statements requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues, expenses, and related disclosure of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates and assumptions, including those related to revenue recognition, stock-based compensation, short-term investments, patents and intangible assets, income taxes, contingencies, and litigation. We base our estimates and assumptions on historical experience and on various other factors that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates and assumptions.

We believe the following are our most critical accounting policies as they require our significant judgments and estimates in the preparation of our consolidated financial statements:

Revenue Recognition

We recognize revenues in accordance with applicable accounting standards, including Accounting Standards Codification (“ASC”) 605-10-S99, “Revenue Recognition” (“ASC 605-10-S99”); ASC 605-25, “Multiple Element Arrangements” (“ASC 605-25”); and ASC 985-605, “Software-Revenue Recognition” (“ASC 985-605”). We derive our revenues from three principal sources: royalty and license fees, product sales, and development contracts. As described below, management judgments and estimates must be made and used in connection with the revenue recognized in any accounting period. Material differences may result in the amount and timing of our revenue for any period based on the judgments and estimates made by our management. Specifically, in connection with each transaction, we must evaluate whether: (i) persuasive evidence of an arrangement exists, (ii) delivery has occurred, (iii) the fee is fixed or determinable, and (iv) collectibility is probable. We apply these criteria as discussed below.

31

Table of Contents

Royalty and license revenue — We license our portfolio of patents to customers in a variety of industries such as mobility, gaming, automotive, and medical devices. A majority of these are variable fee arrangements where the royalties earned by us are based on unit or sales volumes of the respective licensees. We also enter into fixed license fee arrangements. The terms of the royalty agreements generally require licensees to give notification of royalties due to us within 30 — 45 days of the end of the quarter during which their related sales occur. As we are unable to estimate the licensees’ sales in any given quarter to determine the royalties due to us, we recognize royalty revenues based on royalties reported by licensees during the quarter and when all revenue recognition criteria are met. We recognize fixed license fee revenue for licenses to our IP when earned under the terms of the agreements, which is generally recognized on a straight-line basis over the expected term of the license. Certain royalties are based upon customer shipments or revenues and could be subject to change and may result in out of period adjustments.

Development contracts and other revenue — Development contracts and other revenue are comprised of engineering services (engineering services and/or development contracts) and in very limited cases, post contract customer support (“PCS”). Engineering services revenues are recognized under the proportional performance accounting method based on physical completion of the work to be performed or completed performance method. A provision for losses on contracts is made, if necessary, in the period in which the loss becomes probable and can be reasonably estimated. Revisions in estimates are reflected in the period in which the conditions become known. To date, such losses have not been significant. Revenue from PCS is typically recognized over the period of the ongoing obligation, which is generally consistent with the contractual term.

Multiple element arrangements — We enter into multiple element arrangements in which customers purchase time-based non-exclusive licenses that cannot be resold to others, which include a combination of software and/or IP licenses, engineering services, and in very limited cases PCS. For arrangements that are software based and include software and engineering services, the services are generally not essential to the functionality of the software, and customers may purchase engineering services to facilitate the adoption of our technology, but they may also decide to use their own resources or appoint other engineering service organizations to perform these services. For these arrangements, including those with PCS, revenue is recognized either over the period of the ongoing obligation which is generally consistent with the contractual term, or when deliverables have been completed.

Product sales — We recognize revenue from the sale of products and the license of associated software, if any, and expense all related costs of products sold, once delivery has occurred and customer acceptance, if required, has been achieved. We have determined that the license of software for the medical simulation products is incidental to the product as a whole. We typically grant our customers a warranty which guarantees that our products will substantially conform to our current specifications for generally three to twelve months from the delivery date pursuant to the terms of the arrangement. Historically, warranty-related costs have not been significant.

Cost of Revenues — Cost of revenues includes both cost of product sales and cost of development contract revenues. Cost of product sales consists primarily of contract manufacturing and other overhead costs. Cost of development contract revenue includes primarily labor related costs relating to these contracts.

Stock-based Compensation — Stock-based compensation cost is measured at the grant date based on the fair value of the award and is recognized as expense on a straight-line basis over the requisite service period, which is the vesting period.

32

Table of Contents

Valuation and amortization method — We use the Black-Scholes-Merton option pricing model (“Black-Scholes model”), single-option approach to determine the fair value of stock options and Employee Stock Purchase Plan (“ESPP”) shares. All share-based payment awards are amortized on a straight-line basis over the requisite service periods of the awards, which are generally the vesting periods. Stock-based compensation expense recognized at fair value includes the impact of estimated forfeitures. We estimate future forfeitures at the date of grant and revise the estimates if necessary, in subsequent periods if actual forfeitures differ from these estimates. The determination of the fair value of stock-based payment awards on the date of grant using an option-pricing model is affected by our stock price as well as assumptions regarding a number of complex and subjective variables. These variables include actual and projected employee stock option exercise behaviors that impact the expected term, our expected stock price volatility over the term of the awards, risk-free interest rate, and expected dividends.

If factors change and we employ different assumptions for estimating stock-based compensation expense in future periods, or if we decide to use a different valuation model, the future periods may differ significantly from what we have recorded in the current period and could materially affect our operating results.

The Black-Scholes model was developed for use in estimating the fair value of traded options that have no vesting restrictions and are fully transferable, characteristics not present in our option grants and ESPP shares. Existing valuation models, including the Black-Scholes model, may not provide reliable measures of the fair values of our stock-based compensation. Consequently, there is a risk that our estimates of the fair values of our stock-based compensation awards on the grant dates may bear little resemblance to the actual values realized upon the exercise, expiration, early termination, or forfeiture of those stock-based payments in the future. Certain stock-based payments, such as employee stock options, may expire and be worthless or otherwise result in zero intrinsic value as compared to the fair values originally estimated on the grant date and reported in our financial statements. Alternatively, value may be realized from these instruments that are significantly higher than the fair values originally estimated on the grant date and reported in our financial statements. There currently is no market-based mechanism or other practical application to verify the reliability and accuracy of the estimates stemming from these valuation models, nor is there a means to compare and adjust the estimates to actual values.

See Note 10 to the consolidated financial statements for further information regarding stock-based compensation.

Accounting for Income Taxes

We use the asset and liability method of accounting for income taxes. Under this method, income tax expense is recognized for the amount of taxes payable or refundable for the current year. In addition, deferred tax assets and liabilities are recognized for the expected future tax consequences of temporary differences between the financial reporting and tax bases of assets and liabilities, and for operating losses and tax credit carryforwards. Valuation allowances are established when necessary to reduce deferred tax assets to the amount expected to be realized and are reversed at such time that realization is believed to be more likely than not.

Our judgments, assumptions, and estimates relative to the current provision for income tax take into account current tax laws, our interpretation of current tax laws, and possible outcomes of current and future audits conducted by foreign and domestic tax authorities. We have established reserves for income taxes to address potential exposures involving tax positions that could be challenged by tax authorities. Although we believe our judgments, assumptions, and estimates are reasonable, changes in tax laws or our interpretation of tax laws and any future tax audits could significantly impact the amounts provided for income taxes in our consolidated financial statements.

Our assumptions, judgments, and estimates relative to the value of a deferred tax asset take into account predictions of the amount and category of future taxable income, such as income from operations or capital gains income. Actual operating results and the underlying amount and category of income in future years could render inaccurate our current assumptions, judgments, and estimates of recoverable net deferred tax assets. Any of the

33

Table of Contents

assumptions, judgments, and estimates mentioned above could cause our actual income tax obligations to differ from our estimates, thus materially impacting our financial position and results of operations.

Short-term Investments

Our short-term investments consist primarily of U.S. treasury bills and government agency securities purchased with an original or remaining maturity of greater than 90 days on the date of purchase. We classify all debt securities with readily determinable market values as “available-for-sale”. Even though the stated maturity dates of these debt securities may be one year or more beyond the balance sheet date, we have classified all debt securities as short-term investments as they are available for current operations and reasonably expected to be realized in cash or sold within one year. These investments are carried at fair market value, and using the specific identification method, any unrealized gains and losses considered to be temporary in nature are reported as a separate component of other comprehensive income (loss) within stockholders’ equity.

For debt securities in an unrealized loss position, we are required to assess whether (i) we have the intent to sell the debt security or (ii) it is more likely than not that we will be required to sell the debt security before its anticipated recovery. If either of these conditions is met, an other-than-temporary impairment on the security must be recognized in earnings equal to the entire difference between its fair value and amortized cost basis.

For debt securities in an unrealized loss position which are deemed to be other-than-temporary where neither of the criteria in the paragraph above are present, the difference between the security’s then-current amortized cost basis and fair value is separated into (i) the amount of the impairment related to the credit loss (i.e., the credit loss component) and (ii) the amount of the impairment related to all other factors (i.e., the non-credit loss component). The credit loss component is recognized in earnings. The non-credit loss component is recognized in accumulated other comprehensive loss. The credit loss component is the excess of the amortized cost of the security over the best estimate of the present value of the cash flows expected to be collected from the debt security. The non-credit component is the residual amount of the other-than-temporary impairment.

When calculating the present value of expected cash flows to determine the credit loss component of the other-than-temporary impairment, we estimate the amount and timing of projected cash flows on a security-by-security basis. These calculations reflect our expectations of the performance of the underlying collateral and of the issuer to meet payment obligations as applicable. The expected cash flows are discounted using the effective interest rate of the security prior to any impairment. The amortized cost basis of a debt security is adjusted for credit losses recorded to earnings. The difference between the cash flows expected to be collected and the new cost basis is accreted to investment income over the remaining expected life of the security.

Further information about short-term investments may be found in Note 2 to the consolidated financial statements.

Patents and Intangible Assets

We have acquired patents and other intangible assets. In addition, we capitalize the external legal, filing, and continuation or annuity fees associated with patents and trademarks. We assess the recoverability of our intangible assets, and we must make assumptions regarding estimated future cash flows and other factors to determine the fair value of the respective assets that affect our consolidated financial statements. If these estimates or related assumptions change in the future, we may be required to record impairment charges for these assets. We amortize our intangible assets related to patents and trademarks, once they are issued, over their estimated useful lives, generally 10 years. Future changes in the estimated useful life could affect the amount of future period amortization expense that we will incur. During the year ended December 31, 2012, we capitalized costs associated with patents and trademarks of $3.2 million. Our total amortization expense (exclusive of impairments or abandonments of $491,000) for the same period was $1.1 million.

34

Table of Contents

The above listing is not intended to be a comprehensive list of all of our accounting policies. In many cases, the accounting treatment of a particular transaction is specifically dictated by GAAP, with no need for management’s judgment in its application. There are also areas in which management’s judgment in selecting any available alternative would not produce a materially different result.

Results of Operations

Overview of 2012

We continued to invest in research, development, sales, and marketing in our key lines of business. Key events in the year were as follows:

In 2013, we expect royalty revenue to be the major component of our revenue as our technology continues to be included in more of our licensees’ products and as we continue to implement our patent licensing program relating to Basic Haptics. IP litigation may cause us to expend significant financial resources in the future and have an adverse effect on the results of our operations. Additionally, our success could be limited by several factors, including global economic conditions, the timely release of our new products and our licensees’ products, continued market acceptance of our products and technology, and the introduction of new products by existing or new competitors. For a further discussion of these and other risk factors, see Item 1A — “Risk Factors.”

35

Table of Contents

The following table sets forth our consolidated statements of operations data as a percentage of total revenues:

Revenues

2012 Compared to 2011

Royalty and license revenue — Royalty and license revenue is comprised of royalties earned on sales by our licensees and license fees charged for our IP portfolio. The increase in royalty and license revenue was due to increases from our medical, mobility, automotive, and chip and other licensees, partially offset by decreases from our gaming licensees.

Royalty and license revenue increased by 7% for mobility customers primarily due to an increased volume of new handsets and other devices sold primarily by Korean and Japanese licensees. We anticipate that this line of business will grow in importance as mobile device manufacturers increasingly recognize the value of our IP and technology and as we expand our presence in China, Korea, and Japan.

36

Table of Contents

Royalty and license revenue increased by 58% for medical customers primarily due to additional royalty revenue from additional volume of units sold by our licensees along with additional license fees.

Royalty and license revenue also increased by 9% for automotive customers due to our technology being incorporated in an increased volume of vehicles. Royalty and license revenue increased by 18% for chip and other customers primarily due to increased volume of chips sold into China and other Asian markets.

Royalty and license revenue decreased by 4% for gaming customers mainly due to a decrease in units shipped by certain licensees. This decrease was primarily due to the current softness in the console gaming market, which can fluctuate based upon consumer gaming preferences and the timing of introductions of new gaming console systems.

We expect royalty and license revenue to be the major component of our future revenue as our technology continues to be included in more products and as we continue our efforts to monetize our IP. We typically experience seasonally higher revenue from our gaming and mobility customers due to the reporting of holiday sales in the first calendar quarter.

Product sales — Product sales are comprised primarily of medical products, actuators, design kits, and integrated circuits. The decrease in product sales primarily reflects a reduction in medical product sales specifically related to weaker demand for our Virtual IV simulator product. In December of 2012 we entered into a royalty generating licensing agreement with our Virtual IV partner in accordance with which we will no longer produce the Virtual IV system. As a result of this agreement, we expect product sales will be significantly lower in the future.

Development contracts and other revenue — Development contracts and other revenue is comprised of revenue on commercial contracts. Development contracts and other revenue increased mainly due to an increase in contracted engineering service revenue from our mobility and automotive customers partially offset by a decrease in engineering service revenue from our medical customers. We continue to focus our engineering resources on development efforts that leverage our existing sales and channel distribution capabilities. Accordingly, we do not expect development contract revenue to be a significant part of total revenues in the future.

For 2012 revenues generated in North America, Europe, Far East, and Rest of the World represented 41%, 13%, 46%, and 0%, respectively, compared to 42%, 13%, 45%, and 0%, respectively, for 2011. The shift in revenues among regions was mainly due to an increase in royalty and license revenue in the Far East offset by a decrease in product sales in North America. The increase in royalty and license revenue from the Far East was mainly due to increased royalties from mobility, automotive, and chip and other licensees. The decrease in product sales in North America was primarily due to a reduction in product sales of our Virtual IV medical simulator products.

2011 Compared to 2010

Royalty and license revenue — The increase in royalty and license revenue was due to increases in royalty and license revenue generated primarily from increases in the mobility, gaming, and medical lines of business, partially offset by decreases from our other licensees.

Royalty and license revenue increased by 25% for gaming customers mainly due to increases in royalties from new and existing customers due to increased units shipped by licensees, partially offset by decreases in certain true ups and other one-time payments that occurred primarily in the second quarter of 2010.

Royalty and license revenue increased by 21% for mobility customers primarily due to increases in units shipped and more widespread adoption of our technology in the mobility market. We also recorded approximately $820,000 as an increase in revenue as a result of customers self-reporting adjustments to previously reported amounts.

37

Table of Contents

Product sales — The decrease in product sales was due primarily to a $3.9 million decrease in medical product sales mainly due to the divesture of medical simulation product lines. On March 30, 2010 we entered into an agreement with CAE and sold certain assets and divested the Endoscopy, Endovascular, and Laparoscopy medical simulation product lines to CAE resulting in reduced medical product sales subsequent to that date. Revenue for the year ended December 31, 2010 for the divested medical product lines was approximately $4 million.

Development contracts and other revenue — Development contracts and other revenue increased mainly due to an increase in contracted engineering services mainly from medical customers.

For 2011 revenues generated in North America, Europe, Far East, and Rest of the World represented 42%, 13%, 45%, and 0%, respectively, compared to 37%, 15%, 46%, and 2%, respectively, for 2010. The shift in revenues among regions was mainly due to a decrease in product sales in Europe, the Far East, and Rest of the World as a result of the divestiture of the medical simulation product lines. These decreases were partially offset by an increase in royalty and license revenue in the Far East. The increase in Far Eastern royalty and license revenue was primarily due to increased royalty and license revenue from licensees of mobile devices partially offset by a decrease in royalty and license revenue from other licensees. In addition, there was an increase in royalty and license revenue in North America partially offset by a decrease in product revenue in North America. The increase in North American royalty and license revenue was primarily due to increased royalty and license revenue from gaming and medical licensees. The decrease in North American product revenue was primarily as a result of the divestiture of the medical simulation product lines.

The total revenues of approximately $31 million in 2010 was comprised of approximately $4 million from medical product lines transferred to CAE and approximately $1 million of gaming royalty true ups, with the remainder of approximately $26 million representing current ongoing customers or business.

Cost of Revenues

2012 compared to 2011 — Our cost of revenues consists primarily of direct materials, contract manufacturing, and overhead costs for product sales and labor related costs for development contracts and other. It excludes amortization and impairment or abandonment of intangibles. Lower product sales were the major contributor to the overall reduction of cost of revenues for 2012 as compared to 2011. Specifically, the decrease in cost of revenues for 2012 as compared to 2011 was primarily due to decreased direct material costs, contract manufacturing costs, and related costs of $201,000; partially offset by an increase in warranty and repair expense of $59,000, an increase in salary, benefits, and overhead of $57,000; and an increase in obsolescence expense of $21,000. The decrease in direct material, contract manufacturing, related costs, and freight expense of approximately 20% was mainly due to a decrease in related product sales. As previously discussed, in the future we will only be licensing our Virtual IV systems instead of manufacturing them. As a result, we expect cost of revenue will be significantly reduced in 2013.

2011 compared to 2010 — The divestiture of certain medical simulation product lines in 2010 was a major contributor to the overall reduction of cost of revenues in 2011 compared to 2010. Specifically, the decrease in cost of revenues for 2011 compared to 2010 was primarily due to decreased direct material costs, contract manufacturing, and related costs of $1.5 million and decreased freight costs of $177,000. The decrease in direct material, contract manufacturing, related costs, and freight expense of approximately 62% in 2011 compared to 2010 was mainly due to a similar decrease in product sales.

38

Table of Contents

Expenses

Sales and Marketing — Our sales and marketing expenses are comprised of employee compensation and benefits, sales commissions, advertising, trade shows, collateral marketing materials, market development funds, travel, and an allocation of facilities costs. The decrease in sales and marketing expense for 2012 as compared to 2011 was primarily due to decreased compensation, benefits, and other related costs of $529,000 mainly due to decreased sales and marketing headcount and benefits, as well as decreased consulting expense of $72,000; partially offset by increased marketing, advertising, and public relations costs of $137,000 due to current marketing initiatives, and increased bad debt expense of $134,000. We expect that sales and marketing expenses will continue to be significant as we continue to invest in sales and marketing to further our focus on building greater market acceptance for our touch technologies.

The decrease in sales and marketing expense for 2011 as compared to 2010 was primarily due to the divestiture of the medical simulation product lines, resulting in reduced ongoing expenses. Specifically, the decrease in overall sales and marketing expenses was mainly due to decreased compensation, benefits, and other related costs of $1.1 million primarily due to decreased sales and marketing headcount and decreased travel expense of $156,000 related to the decrease in sales and marketing headcount, partially offset by increased marketing, advertising, and public relations costs of $396,000.

Research and Development — Our research and development expenses are comprised primarily of employee compensation and benefits, consulting fees, tooling and supplies, and an allocation of facilities costs. The increase in research and development expenses for 2012 as compared to 2011 was primarily due to increased compensation, benefits, and other related costs of $174,000 mainly due to increased headcount and related expense; partially offset by decreased consulting expense of $89,000 and decreased lab and prototyping costs of $36,000. We believe that continued significant investment in research and development is critical to our future success, and we expect to make significant increased investments in areas of research and technology development to support future growth.

The decrease in research and development expense for 2011 as compared to 2010 was primarily due to the divestiture of the medical simulation product lines partially offset by increased investment in research and development efforts. Specifically, the decrease in overall research and development expenses was primarily due to decreased compensation, benefits, and overhead of $575,000 due to reductions from the divestiture of the medical simulation product lines, partially offset by increased compensation, benefits, and overhead of $315,000 due to increased headcount. In addition, we had decreased consulting costs of $93,000.

General and Administrative — Our general and administrative expenses are comprised primarily of employee compensation and benefits, legal and professional fees, office supplies, travel, and an allocation of facilities costs. The increase in general and administrative expenses 2012 as compared to 2011 was primarily due to increased legal, professional, and license fee expenses of $7.7 million, partially offset by decreased compensation, benefits, and other related costs of $899,000. The increased legal and professional expenses were primarily due to increased litigation expenses of $7.5 million relating to ongoing and completed litigation and increased patent related legal costs of $341,000, partially offset by reduced other professional services expenses of $120,000. The decreased compensation, benefits, and other related costs were mainly due to reduced stock compensation costs, decreased headcount expenses, and reduced severance costs for terminated employees. We

39

Table of Contents

will continue to incur costs related to litigation, which will cause our general and administrative expenses to be significant as we continue to assert our IP and contractual rights and defend any lawsuits brought against us, but we expect legal expenses to be reduced in 2013 due to litigation settlements in 2012 and the anticipated conclusion of current ITC litigation during 2013.

The decrease in general and administrative expenses for 2011 as compared to 2010 was primarily due to decreased legal, professional, and license fee expenses of $2.7 million, partially offset by increased compensation, benefits, and other related costs of $256,000. The decreased legal and professional expenses were primarily due to decreased accounting, audit, legal and consulting costs mainly resulting from our internal investigation which was concluded in 2010. A decrease in litigation expenses as certain lawsuits were settled during 2010 also contributed to the overall reduction in legal and professional expenses. The increased compensation, benefits, and other related costs was primarily due to increased stock compensation expense mainly due to the timing of the expense of stock options granted and increased severance costs for terminated employees.

Amortization, impairment, and abandonment of Intangibles — Our amortization, impairment, and abandonment of intangibles is comprised primarily of patent amortization and other intangible amortization along with impairment or write off of abandoned and expired patents. Amortization, impairment, and abandonment of intangibles increased from 2011 to 2012 and from 2010 to 2011 mainly due to increased amortization from the increased number of patents.

Interest and Other Income

Interest and Other Income — Interest and other income consist primarily of interest income from cash and cash equivalents and short-term investments, interest on notes receivable, exchange rate gains and losses and other income. Interest and other income decreased in 2012 compared to 2011 primarily as a result of decreased interest income due to reduced cash, cash equivalents, and short-term investments and exchange rate losses; partially offset by increased interest on notes receivable.

Interest and other income decreased in 2011 compared to 2010 primarily as a result of decreased interest income mainly due to reduced interest rates on cash, cash equivalents, and short-term investments.

Provision for Taxes

For 2012 we recorded a provision for income taxes of $792,000 yielding an effective tax rate of (16.1)%. The current year tax provision is primarily reflective of the recording of foreign withholding tax expense which has decreased as a result of reduced withholding tax expense from certain Asian countries. For 2011 we recorded a provision for income taxes of $1.8 million yielding an effective tax rate of 1202.6%. The 2011 tax provision is primarily reflective of the recording of foreign withholding tax expense which increased due to increased withholding tax expense from certain Asian countries. For 2010, we recorded a provision for income taxes of

40

Table of Contents

$1.5 million yielding an effective tax rate of (32.9)%. The 2010 year tax provision is also reflective of the recording of foreign withholding tax expense. As such, for each of these three years, the effective tax rate differs from the statutory rates, respectively.

Discontinued Operations

Gain on sales of discontinued operations, net of tax, increased for the year ended December 31, 2012 compared to the year ended December 31, 2011 due to increased payments received from the sale of our 3D family of products. During 2009, we ceased operations of the 3D product line and sold our CyberGlove family of products, SoftMouse 3D positioning device family of products, and our Microscribe family of products, and recorded a gain on sale from discontinued operations. Accordingly, the operations of the 3D product line were classified as discontinued operations in the consolidated statement of operations.

Gain on sales of discontinued operations, net of tax, decreased for the year ended December 31, 2011 compared to the year ended December 31, 2010 due to a reduction in payments received from the sale of our 3D family of products.

Segment Results

Through March 31, 2010, we managed our business under two operating and reportable segments: Touch and Medical. As discussed in Notes 11 and 16 of the consolidated financial statements, at March 30, 2010, we had divested our Endoscopy, Endovascular, and Laparoscopy product lines. The primary focus of our medical business changed from simulation product sales to a licensing model under which we develop and license a wide range of haptic-related software and patented technologies that generate license and royalty revenue.

As of April 1, 2010, we reorganized into one segment and as of that time there was no longer separate management, development, operations, or administrative personnel specifically for medical operations or product lines.

As such, segment information previously reported under our Medical and Touch segments was eliminated and all discussion of our business is included in discussions of our company as a whole.

Liquidity and Capital Resources

Our cash, cash equivalents, and short-term investments consist primarily of money market funds and U.S. treasury bills and government agency securities. All of our short-term investments are classified as available-for-sale. The securities are stated at market value, with unrealized gains and losses reported as a component of accumulated other comprehensive income, within stockholders’ equity.

As of December 31, 2012, our cash, cash equivalents, and short-term investments totaled $43.5 million, a decrease of $12.8 million from $56.3 million on December 31, 2011.

Cash provided by (used in) operating activities — Net cash used in operating activities during 2012 was $4.2 million compared to $2.4 million provided by operations in 2011, a decrease of $6.6 million. Cash used in operating activities during 2012 was primarily the result of our net loss of $5.6 million, a decrease of $3.2 million due to a change in deferred revenue and customer advances primarily due to recognition of deferred revenue, a decrease of $685,000 due to a change in accrued compensation and other current liabilities mainly from decreased activity from new leasehold construction at the end of 2011, a decrease of $504,000 due to a change in accounts and other receivables from the timing of payment of receivables, and a decrease of $227,000 due to a change in prepaid expenses and other current assets. These decreases were partially offset by an increase of $374,000 primarily due to a change in other long-term liabilities due to an increase in deferred rent, and an

41

Table of Contents

increase of $282,000 due to a change in inventories mainly due to shipments of our Virtual IV product. Cash used in operating activities during 2012 was also affected by noncash charges of $5.3 million, including $3.1 million of noncash stock-based compensation, $1.6 million in amortization, impairment, and abandonment of intangibles and $654,000 in depreciation and amortization.

Net cash provided by operating activities during 2011 was $2.4 million, an improvement of $4.2 million from the $1.8 million used in operating activities during 2010. Cash provided by operating activities during 2011 was primarily the result of an increase of $3.3 million due to a change in prepaid expenses and other current assets primarily reflecting a tax refund received. Cash provided by operating activities during 2011 was also affected by noncash charges and credits of $6.0 million, including $3.6 million of noncash stock-based compensation, $1.4 million in amortization and impairment or abandonment of intangibles, and $1.1 million in depreciation and amortization. These increases were partially offset by our net loss of $1.6 million, a decrease of $3.6 million due to a change in deferred revenue and customer advances, a decrease of $785,000 due to a change in accrued compensation and other current liabilities, a decrease of $567,000 due to a change in accounts receivable, a decrease of $266,000 due to a change in other long-term liabilities, and a decrease of $116,000 due to a changes in other assets and other items. Deferred revenue and customer advances decreased mainly due to the recognition of previously deferred revenue. Accrued compensation and other current liabilities changed due to a reduction in accrued compensation and the timing of payments. Accounts and other receivables increased primarily due an increase in other receivables primarily from a landlord lessor and others.

Cash provided by (used in) investing activities — Net cash provided by investing activities during 2012 was $6.1 million, compared to the $3.3 million used in investing activities during 2011, an increase of $9.4 million. Net cash provided by investing activities during 2012 consisted of maturities of short-term investments of $54.0 million and proceeds from sales of discontinued operations of $250,000. This was partially offset by purchases of short-term investments of $43.9 million; additions to intangibles of $3.2 million primarily due to capitalization of external patent filings and application costs; and purchases of property, plant, and equipment of $1.0 million. Net cash used in investing activities during 2011 was $3.3 million, compared to the $6.2 million used in investing activities during 2010, a decrease of $2.9 million. Net cash used in investing activities during 2011 consisted primarily of purchases of short-term investments of $48.9 million and a $3.3 million increase in intangibles primarily due to capitalization of external patent filing and application costs, partially offset by an increase in proceeds from maturities of available-for-sale investments of $49.0 million.

Cash provided by (used in) financing activities — Net cash used in financing activities during 2012 was $4.6 million compared to $4.0 million used in 2011, or a $0.6 million increase in cash used compared to the prior year. Net cash used in financing activities during 2012 consisted primarily of repurchases of common stock of $5.7 million, partially offset by exercises of stock options and the issuance of common stock under the employee stock purchase plan of $1.2 million. Net cash used in financing activities during 2011 was $4.0 million compared to $418,000 provided during 2010, or a $4.4 million increase in cash used compared to the prior year. Net cash used in financing activities for 2011 consisted primarily of repurchases of common stock of $6.5 million, partially offset by exercises of stock options and the issuance of common stock under the employee stock purchase plan of $2.4 million.

We believe that our cash and cash equivalents will be sufficient to meet our working capital needs for at least the next twelve months. We will continue to protect and defend our extensive IP portfolio, which is expected to result in the continued use of cash. Our Board has approved repurchases of our shares of common stock under the previously authorized Stock Repurchase Program which currently has $19.4 million remaining. We anticipate that capital expenditures for property and equipment for the year ended December 31, 2013 will be less than $500,000. We anticipate that capitalization of external patent filing and application costs for the year ended December 31, 2013 will be approximately $3.5 million. Cash flows from our discontinued operations have been included in our consolidated statement of cash flows with continuing operations within each cash flow category. The absence of cash flows from discontinued operations is not expected to affect our future liquidity or capital resources. Additionally, if we acquire businesses, patents, or products, our cash or capital requirements could increase substantially. In the event of such an acquisition, or should any unanticipated circumstances arise

42

Table of Contents

that significantly increase our capital requirements, we may elect to raise additional capital through debt or equity financing. Any of these events could result in substantial dilution to our stockholders. There is no assurance that such additional capital will be available on terms acceptable to us, if at all.

Summary Disclosures about Contractual Obligations and Commercial Commitments

The following table reflects a summary of our contractual cash obligations and other commercial commitments as of December 31, 2012 (in thousands):

At December 31, 2012, we had a liability for unrecognized tax benefits totaling $684,000 including interest of $56,000, of which approximately $225,000 could be payable in cash. The Company expects to release reserves and record a tax benefit due to the expiration of statute of limitations during the next 12 months.

Recent Accounting Pronouncements

See Note 1 to the consolidated financial statements for information regarding the effect of new accounting pronouncements on our financial statements.

Item 7A.  Quantitative and Qualitative Disclosures About Market Risk

We are exposed to financial market risks, including changes in interest rates and foreign currency exchange rates. Changes in these factors may cause fluctuations in our earnings and cash flows. We evaluate and manage the exposure to these market risks as follows:

Cash Equivalents, Short-term Investments, and Long-Term Investments — We have cash equivalents and short-term investments of $39.0 million as of December 31, 2012. These securities are subject to interest rate fluctuations. An increase in interest rates could adversely affect the market value of our fixed income securities. A hypothetical 100 basis point increase in interest rates would result in an approximate $122,000 decrease in the fair value of our cash equivalents, short-term investments, and long-term investments as of December 31, 2012.

We limit our exposure to interest rate and credit risk by establishing and monitoring clear policies and guidelines for our cash equivalents and short-term investment portfolios. The primary objective of our policies is to preserve principal while at the same time maximizing yields, without significantly increasing risk. Our policy’s guidelines limit exposure to loss by limiting the sums we can invest in any individual security and restricting investment to securities that meet certain defined credit ratings. We do not use derivative financial instruments in our investment portfolio to manage interest rate risk.

Foreign Currency Exchange Rates — A substantial majority of our revenue, expense, and capital purchasing activities are transacted in U.S. dollars. However, we do incur certain operating costs for our foreign operations in other currencies but these operations are limited in scope and thus we are not materially exposed to foreign currency fluctuations. Additionally we have some reliance on international and export sales that are subject to the risks of fluctuations in currency exchange rates. Because a substantial majority of our international and export revenues, as well as expenses, are typically denominated in U.S. dollars, a strengthening of the U.S. dollar could cause our products to become relatively more expensive to customers in a particular country, leading to a reduction in sales or profitability in that country. We have no foreign exchange contracts, option contracts, or other foreign currency hedging arrangements.

43

Table of Contents

Item 8.  Financial Statements and Supplementary Data

IMMERSION CORPORATION

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

44

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of Immersion Corporation

San Jose, California

We have audited the accompanying consolidated balance sheets of Immersion Corporation and subsidiaries (the “Company”) as of December 31, 2012 and 2011, and the related consolidated statements of operations and comprehensive loss, stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2012. Our audits also included the financial statement schedule listed in the Index at Item 15. These consolidated financial statements and financial statement schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, such consolidated financial statements present fairly, in all material respects, the financial position of Immersion Corporation and subsidiaries as of December 31, 2012 and 2011, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2012, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, such financial statements, when considered in relation to the basic consolidated financial statements taken as a whole, present fairly, in all material respects, the information set forth therein.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the Company’s internal control over financial reporting as of December 31, 2012, based on the criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated March 6, 2013 expressed an unqualified opinion on the Company’s internal control over financial reporting.

/s/ DELOITTE & TOUCHE LLP

San Jose, California

March 6, 2013

45

Table of Contents

IMMERSION CORPORATION

CONSOLIDATED BALANCE SHEETS

(In thousands, except share and per share amounts)

See notes to consolidated financial statements.

46

Table of Contents

IMMERSION CORPORATION

CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE LOSS

(In thousands, except per share amounts)