INNOVATIVE SOLUTIONS & SUPPORT INC - Annual Report: 2021 (Form 10-K)

Table of Contents

​

​

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

​

​

FORM 10-K

​

​

For the fiscal year ended September 30, 2021

​

OR

​

​

For the transition period from                to               .

​

Commission File No. 000-31157

​

​

INNOVATIVE SOLUTIONS AND SUPPORT, INC.

(Exact name of registrant as specified in its charter)

​

​

(610) 646-9800
(Registrant’s telephone number, including area code)

​

Securities registered pursuant to Section 12(b) of the Act:

​

​

Securities registered pursuant to Section 12(g) of the Act: None

​

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

​

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

​

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

​

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

​

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

​

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

​

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

​

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

​

The aggregate market value of the registrant’s common stock held by non-affiliates of the registrant as of March 31, 2021 (the last business day of the registrant’s most recently completed second quarter) was approximately $83.4 million (based on the closing sale price of the registrant’s common stock on the NASDAQ Stock Market on such date). Shares of common stock held by each executive officer and director and by each person who owns 10% or more of the registrant’s outstanding common stock have been excluded since such persons may be deemed affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

​

As of November 30, 2021, there were 17,246,372 outstanding shares of the registrant’s common stock.

​

Documents Incorporated by Reference

​

Portions of the registrant’s Proxy Statement for the 2022 Annual Meeting of Shareholders to be filed prior to January 28, 2021 are incorporated by reference into Part III of this Report. Such Proxy Statement, except for the parts therein which have been specifically incorporated by reference, shall not be deemed “filed” for the purposes of this Report on Form 10-K.

​

​

​

​

Table of Contents

INNOVATIVE SOLUTIONS AND SUPPORT, INC.

2021 Annual Report on Form 10-K

Table of Contents

​

​

1

Table of Contents

FORWARD-LOOKING STATEMENTS

This report contains forward looking statements within the meaning of the federal securities laws. These forward looking statements are based largely on current expectations and projections about future events and trends affecting the business, are not guarantees of future performance, and involve a number of risks, uncertainties and assumptions that are difficult to predict. In this report, the words “anticipates,” “believes,” “may,” “will,” “estimates,” “continues,” “anticipates,” “intends,” “forecasts,” “expects,” “plans,” “could,” “should,” “would,” “is likely” and similar expressions, as they relate to the business or to its management, are intended to identify forward looking statements, but they are not exclusive means of identifying them. Unless the context otherwise requires, all references herein to “IS&S,” the “Registrant,” the “Company,” “we,” “us” or “our” are to Innovative Solutions and Support, Inc. and its consolidated subsidiaries.

The forward looking statements in this report are only predictions, and actual events or results may differ materially. In evaluating such statements, a number of risks, uncertainties and other factors could cause actual results, performance, financial condition, cash flows, prospects and opportunities to differ materially from those expressed in, or implied by, the forward looking statements. These risks, uncertainties and other factors include those set forth in Item 1A (Risk Factors) of our Annual Report on Form 10-K and the following factors:

Except as expressly required by the federal securities laws, the Company undertakes no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise after the date of this report. Results of operations in any past period should not be considered indicative of the results to be expected for future periods. Fluctuations in operating results may result in fluctuations in the price of the Company’s common stock.

Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this Annual Report on Form 10-K. The Company does not undertake any obligation to publicly release any revisions to these forward-looking statements to reflect events, circumstances or changes in expectations after the date of this Annual Report on Form 10-K, or to reflect

2

Table of Contents

the occurrence of unanticipated events. The forward-looking statements in this document are intended to be subject to the safe harbor protection provided by Sections 27A of the Securities Act of 1933, as amended (the “Securities Act”), and 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”).

Investors should also be aware that while the Company, from time to time, communicates with securities analysts, it is against its policy to disclose any material non-public information or other confidential commercial information. Accordingly, shareholders should not assume that the Company agrees with any statement or report issued by any analyst irrespective of the content of the statement or report. Furthermore, the Company has a policy against issuing or confirming financial projections, forecasts or opinions issued by others. Thus, to the extent that reports issued by securities analysts contain any projections, forecasts or opinions, such reports are not the responsibility of the Company.

​

3

Table of Contents

PART I

Item 1. Business.

Overview

Innovative Solutions and Support, Inc. (the “Company,” “IS&S,” “we” or “us”) was incorporated in Pennsylvania on February 12, 1988. The Company operates in one business segment as a systems integrator that designs, develops, manufactures, sells and services air data equipment, engine display systems, standby equipment, primary flight guidance, autothrottles and cockpit display systems for retrofit applications and original equipment manufacturers (“OEMs”). The Company supplies integrated Flight Management Systems (“FMS”), Flat Panel Display Systems (“FPDS”), FPDS with Autothrottle, air data equipment, Integrated Standby Units (“ISU”), ISU with Autothrottle and advanced Global Positioning System (“GPS”) receivers that enable reduced carbon footprint navigation.

The Company has continued to position itself as a system integrator, which capability provides the Company with the potential to generate more substantive orders over a broader product base. This strategy, as both a manufacturer and integrator, is designed to leverage the latest technologies developed for the computer and telecommunications industries into advanced and cost-effective solutions for the general aviation, commercial air transport, United States Department of Defense (“DoD”)/governmental and foreign military markets. This approach, combined with the Company’s industry experience, is designed to enable IS&S to develop high-quality products and systems, to reduce product time to market, and to achieve cost advantages over products offered by its competitors.

For several years the Company has been working with advances in technology to provide pilots with more information to enhance both the safety and efficiency of flying, and has developed its COCKPIT/IP® Cockpit Information Portal (“CIP”) product line, that incorporates proprietary technology, low cost, reduced power consumption, decreased weight, and increased functionality. The Company has incorporated Electronic Flight Bag (“EFB”) functionality, such as charting and mapping systems, into its FPDS product line.

The Company has developed an FMS that combines the savings long associated with in-flight fuel optimization in enroute flight management combined with the precision of satellite-based navigation required to comply with the regulatory environments of both domestic and international markets. The Company believes that the FMS, alongside its FPDS and CIP product lines, is well suited to address market demand driven by certain regulatory mandates, new technologies, and the high cost of maintaining aging and obsolete equipment on aircraft that will be in service for up to fifty years. The shift in the regulatory and technological environment is illustrated by the dramatic increase in the number of Space Based Augmentation System (“SBAS”) or Wide Area Augmentation System (“WAAS”) approach qualified airports, particularly as realized through Localizer Performance with Vertical guidance (“LPV”) navigation procedures. Aircraft equipped with the Company’s FMS, FPDS and SBAS/WAAS/LPV enabled navigator, will be qualified to land at such airports and will comply with Federal Aviation Administration (“FAA”) mandates for Required Navigation Performance, and Automatic Dependent Surveillance-Broadcast navigation. IS&S believes this will further increase the demand for the Company’s products. The Company’s FMS/FPDS product line is designed for new production and retrofit applications into general aviation, commercial air transport and military transport aircraft. In addition, the Company offers what we believe to be a state-of-the-art ISU, integrating the full functionality of the primary and navigation displays into a small backup-powered unit. This ISU builds on the Company’s legacy air data computer to form a complete next-generation cockpit display and navigation upgrade offering to the commercial and military markets.

The Company has developed and received certification from the FAA on its NextGen Flight Deck featuring its ThrustSense® Integrated PT6 Autothrottle (“ThrustSense® Autothrottle”) for retrofit in the Pilatus PC-12. The NextGen Flight Deck features Primary Flight and Multi-Function Displays and ISUs, as well as an Integrated FMS and EFB System. The innovative avionics suite includes dual flight management systems, autothrottles, synthetic vision and enhanced vision. The NextGen enhanced avionics suite is available for integration into other business aircraft with Non-FADEC and FADEC engines.

The Company has developed, and in April 2019 received certification from the FAA for, its ThrustSense® Autothrottle for retrofit in the King Air, dual turbo prop PT6 powered aircraft. The autothrottle is designed to automate the power management for speed and power control including go-around. ThrustSense® also ensures aircraft envelope protection and engine protection during all phases of flight reducing pilot workload and increasing safety. The Company has signed a multi-year agreement with Textron Aviation, Inc. (“Textron”) to supply ThrustSense® on the King Air 360 and King Air 260. ThrustSense® is also available for retrofit on King Airs through Textron service centers and third-party service centers.

4

Table of Contents

More recently, on December 9, 2019, the Company received certification from the FAA for a safety mode feature during an engine-out condition for its King Air ThrustSense® Autothrottle. LifeGuard™ provides critical Vmc_a protection that proportionally reduces engine power to maintain directional control.

We believe the ThrustSense® Autothrottle is innovative in that it is the first autothrottle developed for a turbo prop that allows a pilot to automatically control the power setting of the engine. The autothrottle computes and controls appropriate power levels thereby reducing overall pilot workload. The system computes thrust, holds selected speed/torque, and implements appropriate speed and engine limit protection. When engaged by the pilot, the autothrottle system adjusts the throttles automatically to achieve and hold the selected airspeed guarded by a torque/temperature limit mode. The autothrottle system takes full advantage of the integrated cockpit utilizing weight and balance information for optimal control settings and enabling safety functions like a turbulence control mode.

The Company sells to both the OEM and the retrofit markets. Customers include various OEMs, commercial air transport carriers and corporate/general aviation companies, DoD and its commercial contractors, aircraft operators, aircraft modification centers, government agencies, and foreign militaries. Occasionally, IS&S sells its products directly to DoD; however, the Company sells its products primarily to commercial customers for end use in DoD programs. Sales to defense contractors are generally made on commercial terms, although some of the termination and other provisions of government contracts are applicable to these contracts. The Company’s retrofit projects are generally pursuant to either a direct contract with a customer or a subcontract with a general contractor to a customer (including government agencies).

Customers have been and may continue to be affected by changes in economic conditions both in the United States and abroad. Such changes may cause customers to curtail or delay their spending on both new and existing aircraft. Factors that can impact general economic conditions and the level of spending by customers include, but are not limited to, the impact of the ongoing COVID-19 pandemic, general levels of consumer spending, increases in fuel and energy costs, conditions in the real estate and mortgage markets, labor and healthcare costs, access to credit, consumer confidence, and other macroeconomic factors that affect spending behavior. Furthermore, spending by government agencies may be reduced in the future if tax revenues decline. If customers curtail or delay their spending or are forced to declare bankruptcy or liquidate their operations because of adverse economic conditions, the Company’s revenues and results of operations would be affected adversely. For example, in the 2020 fiscal year, certain of the Company’s customers temporarily suspended product deliveries as a result of the COVID-19 pandemic, and while these deliveries subsequently resumed, there is a possibility that the COVID-19 pandemic (including as a result of the impact of any newer variants or strains of SARS-CoV-2) will result in other suspensions, delays or order cancellations by the Company’s customers or suppliers.

On the other hand, the Company believes that in adverse economic conditions, customers that may have otherwise elected to purchase newly manufactured aircraft may be interested instead in retrofitting existing aircraft as a cost-effective alternative, thereby creating a market opportunity for IS&S.

The ongoing COVID-19 pandemic is nevertheless a significant event, driver of market trends, and source of uncertainty that may ultimately have a direct or indirect material impact on the Company’s business, financial position, liquidity, or ability to service customers or maintain critical operations. In direct response to the COVID-19 pandemic, the Company has taken specific actions to seek to ensure the safety of its employees, including temperature monitoring, frequent sanitization of workspaces, observance of social distancing protocols, and other increased safety measures.

Industry

A wide range of information is critical for proper and safe operation of aircraft. With advances in technology, new types of information to assist pilots are becoming available for display in cockpits, such as satellite-based weather, ground terrain maps, and ADS-B navigation. The Company believes that aircraft cockpits will become more complete information centers, capable of delivering additional information that is either mandated by regulation or demanded by pilots to assist in the safe and efficient operation of aircraft.

The Company classifies flight data into four general types: aircraft heading and altitude information, flight critical aircraft control data, navigation data, and maintenance and aircraft health data. Aircraft heading and altitude information includes aircraft speed, altitude, and rates of ascent and descent. Flight critical aircraft control information includes engine data, such as fuel and oil quantity, and other engine measurements. Navigation data includes radio position, flight management, GPS, and alternative source information (i.e. information not originating on the aircraft, including weather depiction maps, GPS navigation, and surface terrain maps). Maintenance and aircraft health data includes on-board sensors and programs to measure parameters related to the health of a system

5

Table of Contents

on the aircraft. Air data calculations are based primarily on air pressure measurements derived from sensors on the aircraft. Engine data are determined by measuring various indices such as temperature, volume, revolutions per minute, and pressure within an aircraft’s engines and other mechanical equipment. GPS and alternative source information are derived typically from satellites or equipment located on land and transmitted by satellite or radio signals to the aircraft. Maintenance and aircraft health data measure multiple parameters on various products and interface with various components to manage, measure, and report on the health, reliability and usability of a system. This information is displayed in the cockpit for reference, enhanced position awareness, and reduced support logistics on properly equipped aircraft.

Traditionally, flight data and other cockpit information were displayed on a series of separate analog mechanical instruments. In the early 1980s, Cathode Ray Tubes (“CRT”) and digital displays using monochromatic Liquid Crystal Displays (“LCD”) began to replace some individual analog instruments. Presently, the industry offers high resolution color flat panels using Active Matrix Liquid Crystal Displays (“AMLCD”) to replace traditional analog instruments, CRT or LCD displays. IS&S expects that the ability to display more information in an efficient space and custom platform will become increasingly important if additional information, such as weather depiction maps, traffic information, surface terrain maps, datalink messaging, and surveillance displays, becomes mandated by regulation or demanded by pilots. Accordingly, the Company believes flat panel displays, which can integrate and display a “suite” of information, will replace individual instrument CRTs and LCDs on legacy aircraft.

In the past, equipment data, such as engine and fuel-related information, were displayed on conventional analog mechanical instruments. Engine and fuel instruments provide information on engine activity, including oil and hydraulic pressures, and temperature. These instruments are clustered throughout an aircraft’s cockpit. Engine and fuel instruments tend to be replaced more frequently than other instruments due to obsolescence and normal wear-and-tear. Aircraft operators continue to purchase individual conventional engine and fuel instruments as replacements because the information that these instruments display is vital for safe and efficient flight. Increasingly, operators are replacing their clusters of analog mechanical instruments with integrated Engine Instrument Display Systems or FPDS packages.

As the skies and airports become more crowded, the aviation industry and its regulators are concentrating on new technologies, procedures, and regulations that allow more aircraft to operate in the skies and on the ground safely, efficiently, and with less impact on the environment. These new technologies and procedures, such as traffic avoidance, ground awareness, increased precision of navigation and vertical position, runway incursion prevention, and increased digital communication, will require innovation and intuitive methods to display situational awareness information for the pilots. The Company believes that flat panel displays provide a strong solution to the growing need for innovation and new methods in this area.

Strategy

The Company’s objective is to become a leading supplier and integrator of cockpit information, and believes that its industry experience and reputation, technology and products, and business strategy provide the basis to achieve this objective. Key elements of the Company’s strategy include:

6

Table of Contents

Products

Current lines of products include:

Flat Panel Display Systems

Flat panel displays are AMLCD screens that can replicate the display of one or a suite of analog or digital displays on one screen. Flat panel displays can replace existing displays in legacy aircraft. AMLCDs are used also for security monitoring on-board aircraft and as tactical workstations on military aircraft. The flat panel product line offers numerous advantages for presentation of engine performance data. During fiscal years 2021, 2020 and 2019, revenues related to FPDS accounted for 88%, 80% and 90%, respectively, of total sales.

The Company’s FPDS can replace conventional analog and digital displays and can display additional information which is not commonly displayed in the cockpit with conventional analog and digital displays. The COCKPIT/IP® is capable of displaying nearly all types of air data, engine and fuel data, altitude, heading and navigational data, maintenance and aircraft health data, and alternative source information. As technology and information delivery systems develop further, additional information will be displayed in the cockpit, such as surface terrain maps and data link messaging. IS&S designed the COCKPIT/IP® to be capable of displaying information from a variety of sources, including its Reduced Vertical Separation Minimum (“RVSM”) air data system, engine and fuel instrumentation, and third-party data and information products.

7

Table of Contents

From time to time, customers may order one or more FPDSs customized to their particular requirements. Typically, the Company charges for the added development cost. This revenue is reported as Engineering Development Contracts (“EDC”) on the consolidated statements of operations. Engineering costs incurred in customizing the FPDSs are included in cost of sales.

Flight Management Systems

The IS&S NextGen Flight Management System is an easily installed navigation and performance computer that complements the IS&S Flat Panel Display System upgrade for commercial air transport aircraft. The FMS interfaces with the IS&S, SBAS, and GPS to provide a GPS-based navigation solution. The GPS receiver is located remotely depending on space availability. To minimize use of cockpit space and ease installation efforts, the FMS is housed in an ARINC 739B compliant Multifunction and Control Display Unit (“MCDU”).

Each FMS/MCDU has an LCD display, keyboard, mode and function keys, line select keys and annunciator lights, and supports ethernet data loading. The flight crew can manually or datalink waypoint flight plans, routes or user-defined waypoints on the IS&S FMS and modify and update these plans via the FMS/MCDU screen. Once the flight plan data is entered, the MCDU computes the most economical flight profiles and provides steering commands for use by the aircraft control system to fly the airplane along the desired route.

The FMS/MCDU package incorporates a robust navigation database capable of storing today’s global database with ample growth for the future. Flight crews can utilize the data in the navigation database to create, edit and modify flight plans for display on the FPDS. The navigation data includes airways, jet routes, Standard Instrument Departure, Standard Terminal Arrival Route, and company stored routes.

The FMS/MCDU is ARINC 739B compliant, which provides an interface option for other cockpit equipment such as SATCOM, ACARS, CMU, HUD, and a printer. The interface to the IS&S FPDS is provided via ethernet. The IS&S EFB is integrated with the FMS/MCDU and FPDS where the control selection of the EFB features and applications are handled via the FMS/MCDU. The display is a five-inch LCD with VGA resolution. The touchscreen display uses LED backlighting and is sunlight readable.

Integrated Standby Unit

The Company’s ISU incorporates the measurement and display of attitude, altitude, airspeed, and navigation data into a single standby/backup navigation instrument for military, commercial air transport and corporate/general aviation applications. The ISU has an integral Inertial Measurement Unit that includes accelerometer, gyro, and magnetometer triads. The unit also includes an integral air data measurement module for measurement of static and total pressure for display of altitude, airspeed, and mach number.

The ISU is a highly reliable and accurate standby navigation system that is based on IS&S’s merger of COCKPIT/IP® display technology and RVSM air data products coupled with the modern technology in MEMS Gyros that have exceptional stability. An IS&S proprietary algorithm provides for accurate computation of attitude, heading and air data parameters. The unit includes a triaxial magnetometer that is designed to be tolerant to the local soft iron effects.

The display uses a familiar Primary Flight Display format to reduce pilot workload. Logistics and maintenance savings are realized due to increased reliability and a reduction in line-replaceable units. The unit is equipped with built-in test and display of navigational aid and maintenance data.

Air Data Systems and Components

The Company’s air data products calculate and display various measures such as aircraft speed, altitude, and vertical rate of change. These air data products utilize advanced sensors to gather air pressure data and customized algorithms to interpret data, thus allowing the system to calculate altitude more accurately. During fiscal 2021, 2020, and 2019, sales of air data systems and components accounted for 12%, 20% and 10%, respectively, of total sales.

IS&S sells individual components and partial and complete air data systems. The components and systems include:

8

Table of Contents

Engine and Fuel Displays

IS&S develops, manufactures and markets engine and fuel displays. These solid-state multifunction displays convey information with respect to fuel and oil levels, and engine activity, such as oil and hydraulic pressure and temperature. They include individual and multiple displays installed throughout the cockpit. The displays can be used in conjunction with the Company’s engine and fuel data equipment or that of other manufacturers.

Engine and fuel displays are vital to safe flight. In addition, accurate conveyance of engine and fuel information is critical for monitoring engine stress and parts maintenance. Engine and fuel displays tend to be replaced more frequently than other displays, and have been slow to incorporate new technology since their introduction because of their low cost, standard design and universal use.

IS&S believes that its air data engine and fuel displays are extremely reliable, have been designed to be programmable, and are adaptable easily without major modification to most modern aircraft. These products have been installed on B727, B737, C-130H, DC-9, DC-10, P-3, F-16 and A-10 aircraft.

Integrated Global Navigation System

The Company’s Integrated Global Navigation System product is an alternative for adding GPS navigation capability to legacy aircraft through the OEM FMS without the high cost of upgrading the current FMS.

This product includes RNP and RNAV approaches via the certified IS&S Beta 3 GPS and leverages components of the Company’s FPDS to provide annunciation to the pilot during GPS procedures.

Autothrottle – ThrustSense^®

The IS&S Autothrottle, ThrustSense®, is a full regime autothrottle, from takeoff to landing phases of flight including go around. ThrustSense® combines full-authority digital engine control (“FADEC”) functionality with low and high speed protection for the Pilatus PC-12 and Beechcraft King Air series aircraft. IS&S believes ThrustSense® improves safety and performance for Pratt and Whitney PT6-powered single and multi-engine aircraft. In the case of multi-engine aircraft, such as the Beechcraft King Air, ThrustSense® provides Vmc_a protection during an engine out condition. The system is light weight, installs with minimal downtime and provides the user with high value for performance. IS&S believes ThrustSense® can attain fuel savings of 3% and when flying constant angle-of-attack the fuel savings can be as much as 10%. The Company in April 2019 received certification from the FAA for, its ThrustSense® Autothrottle for retrofit in the King Air, dual turbo prop PT6 powered aircraft. The Company has signed a multi-year agreement with Textron to supply ThrustSense® on their new production aircraft, the King Air 360 and King Air 260. ThrustSense® is also available for retrofit on King Airs through Textron service centers and third-party service centers.

The IS&S ThrustSense® Autothrottle is designed to ensure stabilized approaches by controlling speeds during descent. During high pilot workload, the autothrottle is designed to prevent the airplane from becoming dangerously slow or fast and protects against overtorque and overtemp, thereby enhancing the safety and capability of your aircraft.

Control of the autothrottle is housed in an easy-to-install ISU that provides standby functionality on a high resolution LCD display. The ThrustSense® Autothrottle is designed to avoid structural modifications to the existing throttle quadrant. ThrustSense® has MEL Relief and On Condition Maintenance.

IS&S believes ThrustSense® can be adapted to virtually all PT6 powered aircrafts with the IS&S ISU. The ISU executes software to control the autothrottle actuator. In addition the ISU calculates, processes and displays altitude, attitude, airspeed, slip/skid, and navigation display information, which IS&S believes is presented in a logical and concise single instrument display. It features a high

9

Table of Contents

resolution LCD display with full LED backlighting, thereby improving reliability and full sunlight readability to the pilot, and fully anti-aliased graphics.

IS&S believes the autothrottle retrofit and standby are easily installed, and typical installation can take less than a day with minimum modifications to the existing flight deck.

Other potential benefits of the ThrustSense® Autothrottle include:

Utilities Management System

IS&S provides the Utilities Management System (“UMS”) for the Pilatus PC-24 which has been certified and delivered. The IS&S UMS integrates a wide range of aircraft functions, which are commonly supported by multiple individual controllers. The UMS-24 monitors aircraft sensors and aircraft control systems as required to achieve system functionality. This open architecture system allows Pilatus to design and/or refine control and monitoring algorithms, in-house.

IS&S believes there is interest in its UMS from other aircraft manufacturers as well. The UMS is an innovative design that controls 20 plus aircraft systems such as navigation, auto-flight, landing gear, surface positions, fire protection, ice/rain protection, electrical loads, lighting, environmental conditions, cabin pressurization, and oxygen systems based on OEM custom configuration.

The UMS is a Data Concentrator and Processing Unit (“DCPU”) that allows manufacturers to configure and program specific applications on a ARINC 653 operating system in an open architecture platform. The UMS acts as the aircraft central maintenance computer allowing for a maximum of six DCPUs to be included in the communication ring. The system provides a significant power and weight saving over the use of federated boxes and utilizes the latest IS&S technological advancements in avionics circuit design.

Customers

The Company’s customers include the United States government (including DoD, the Department of Interior and the Department of Homeland Security), American Airlines, Inc. (“AAL”), Boeing, Deutsche Post DHL Group (“DHL”), FedEx Corporation (“FedEx”), Icelandair, Amazon.com, Inc., L3Harris Technologies, Inc., Lockheed Martin Corporation, Pilatus, Sierra Nevada Corporation (“Sierra Nevada”), and the Department of National Defense (Canada), among others.

The Company’s revenue is concentrated with a limited number of customers. In fiscal year 2021, the two largest customers, Pilatus, and Textron accounted for 20% and 17% of total revenue, respectively. In fiscal year 2020, the three largest customers, Pilatus, Dayton T. Brown, Inc., and Kalitta Air accounted for 33%, 12% and 10% of total revenue, respectively. In fiscal year 2019, the two largest customers, Pilatus and Air Transport Services Group Inc. accounted for 25% and 14% of total revenue, respectively.

Retrofit Market

Historically, a majority of the Company’s sales have come from the retrofit market, which IS&S has pursued because of its continued growth in response to the need to support the world’s aging fleet of aircraft. The design and airframe structure of many types of older aircraft generally exceeds the technology and technical capabilities of the original cockpit instruments and avionics. The Company has developed products that enable owners and operators to upgrade their aircraft by retrofitting them with IS&S products at a competitive cost and with equipment that provides cockpit displays with capabilities and technology equivalent to new aircraft.

10

Table of Contents

IS&S expects its main customers in the retrofit market will continue to be:

Department of Defense and Defense Contractors. The Company sells its products directly to the DoD and to domestic and international defense contractors for end use on military aircraft retrofit programs. DoD programs generally take one of two forms: a subcontract with a prime government contractor, such as Boeing, Lockheed Martin, or L3Harris Technologies, Inc. or a direct contract with the appropriate government agency, such as the U.S. Air Force. The government’s desire for cost-effective retrofit of its aircraft has led it to purchase commercial off-the-shelf equipment rather than to develop specially designed products, which are usually more costly and take longer to implement. These retrofit contracts tend to be on arms-length commercial terms, although some termination and other provisions of government contracts are typically applicable to these contracts, as described under “Government Regulation” below. Each government agency or general contractor retains the right to terminate a contract at any time at its convenience. Upon such alteration or termination, IS&S is entitled typically to be compensated for already delivered items and reimbursement for allowable costs incurred.

Aircraft Operators. The Company sells its products to aircraft operators, including commercial airlines, cargo carriers, and business and general aviation aircraft owners or suppliers, primarily for retrofitting of aircraft owned or operated by these customers. The Company’s commercial fleet customers include or have included, among others, AAL, ABX Air, FedEx and Icelandair. IS&S sells these customers a range of products from FPDS to air data systems.

Aircraft Modification Centers. Aircraft modification centers, which repair and retrofit private aircraft, represent the primary retrofit market for private and corporate jets. IS&S has established relationships with a number of aircraft modification centers throughout the United States, which act as distribution outlets and installation centers for the Company’s products.

Original Equipment Manufacturers

IS&S has signed a multi-year agreement with Textron to supply ThrustSense® on their new production aircraft, the King Air 360 and King Air 260 as described above in “Products-Autothrottle – ThrustSense®”. The Company has developed and manufactures the UMS for Pilatus’ PC-24 aircraft under a multi-year production contract as described above under “Products-Utilities Management System”. The Company also markets its products to other OEMs including, among others, Boeing and Lockheed Martin.

Backlog

​

11

Table of Contents

Backlog represents the value of contracts and purchase orders, less the revenue recognized to date on those contracts and purchase orders. The year over year increase of $5.5 million was the result of booking of $28.5 million in net new business, offset by $23.0 million in recognized revenue. FPDS backlog as of September 30, 2021, increased $5.5 million from September 30, 2020, and air data product backlog as of September 30, 2021, increased by $0.0 million from September 30, 2020. The backlog excludes potential future sole-source production orders from products developed under the Company’s EDC programs, including the Pilatus PC-24, the KC-46A and the Textron King Air 360 and King Air 260 ThrustSense® Autothrottle programs. Although the Company believes that the orders included in backlog are firm, most of the backlog involves orders that can be modified or terminated by the customer. As of September 30, 2021, 4% of the Company’s backlog was expected to be filled beyond fiscal 2022.

Engineering Development

The Company invests a significant percentage of its sales on engineering development, both Research & Development (“R&D”) and EDC. At September 30, 2021, approximately 20% of the Company’s employees were engineers engaged in various engineering development projects. Total engineering development expense comprises both internally funded R&D and product development and design charges related to specific customer contracts. Engineering development expense consists primarily of payroll-related expenses of employees engaged in EDC projects, engineering related product materials and equipment, and subcontracting costs. R&D charges incurred for product design, product enhancements, and future product development are expensed as incurred. Product development and design charges related to specific customer contracts are charged to cost of sales-EDC based on the method of contract accounting (either percentage-of-completion or completed contract) applicable to such contracts.

Sales and Marketing

IS&S focuses its sales efforts on passenger and cargo carrying aircraft operators, general aviation operators, aircraft modification centers, the DoD, DoD contractors, and OEMs. Periodically, the Company evaluates its sales and marketing efforts with respect to these focus areas and, where appropriate, makes use of third-party sales representatives who receive compensation through commissions based on performance. As of September 30, 2021, we have twelve representatives worldwide that are actively selling IS&S products.

We are continuing to expand our maintenance, repair and overhaul (“MRO”) dealer network to address worldwide markets for Boeing 737, 757 and 767, Pilatus PC-12’s, Beechcraft King Air models and other aircraft types. We have established a dealer network for ThrustSense®, and we are in the process of exploring adding more MRO dealerships in the United States and internationally.

Our marketing efforts have focused on applicable markets using email campaigns, advertisements, trade shows, web casts, direct mailers, digital and social media. Our Autothrottle offering on the Pilatus PC-12 and King Air have been favorably featured in multiple articles in major publications over the past several years.

The Company believes its ability to provide prompt and effective repair and upgrade service is critical to its marketing efforts. The Company’s customer service program offers a 24-hour customer hotline. The Company services its customers utilizing either field service engineers or its in-house repair and upgrade facility. The Company may lend spare units to customers when it is repairing or overhauling their equipment. IS&S provides customers with a standard two-year warranty on new products. The Company offers customers extended warranties of varying lengths beyond the two years for additional fees.

The majority of the Company’s sales, personnel and assets are within the United States. In fiscal years 2021, 2020 and 2019 net sales outside the United States amounted to $8.4 million, $9.4 million and $7.5 million, respectively.

Government Regulation

FAA regulations govern the manufacture and installation of the Company’s products in aircraft owned and operated in the United States. Both the IS&S manufacturing facility and the IS&S repair station are FAA-certified. The most significant product and installation regulations are Technical Standard Orders (“TSOs”) and STCs, which establish the minimum operational performance standards. For example, in April 2019, the FAA issued its TSO authorization and STC for the Company’s ThrustSense® Autothrottle for retrofit in the King Air dual prop PT6 powered aircraft. In February 2019, the FAA issued its TSO authorization and STC for the Company’s B767 Integrated Standby Unit to be used on B767 aircraft in the United States.

12

Table of Contents

Generally, sales of IS&S products to European or other non-U.S. owners of aircraft require approval of EASA, or other relevant governmental agencies. EASA certification requirements for the manufacture and installation of the Company’s products in European owned aircraft mirror FAA regulations, and its process for European certification is similar to that of the FAA. For example, in September 2021, EASA and the Transport Canada Civil Aviation issued STCs for the Company’s ThrustSense(R) Full Regime Autothrottle for King Air series aircraft in the European Union and Canada, respectively.

In addition to product-related regulations, IS&S is subject to U.S. government procurement regulations with respect to the sale of the Company’s products to government entities or government contractors. The government agency or general contractor retains the right to terminate a contract at any time at its convenience. Upon such alteration or termination, IS&S is generally entitled to an equitable adjustment to the contract price, so that the Company receives the purchase price for products or services already delivered, reimbursement for allowable costs incurred and for termination related costs.

The Company’s business is also impacted by various other laws and regulations, including, but not limited to, local, state, federal, and international tax codes, import and export controls and customs laws, employment and employment-related laws, environmental laws, intellectual property laws, and consumer protection statutes. The Company from time to time incurs costs in the ordinary course of business in connection with maintaining compliance with these evolving and at times overlapping regulatory regimes.

Manufacturing, Assembly and Materials Acquisition

The Company’s manufacturing activities consist primarily of assembling and testing components and subassemblies and integrating them into finished systems. Typically, the Company purchases components for products, including any necessary raw materials, from third-party suppliers, a number of which are sole source, and assembles them in a clean room environment. Many of the components purchased are standard products, although certain parts are made to the Company’s specifications. Although there are a limited number of suppliers of particular components, management believes other suppliers could provide similar components on comparable terms.

When appropriate, IS&S enters into long-term supply agreements and uses its relationships with long-term suppliers to improve product quality and availability, and to reduce delivery times and product costs. In addition, the Company identifies alternative suppliers for important component parts. Generally, the introduction of component parts from new suppliers into existing products requires FAA certification of the entire finished product if the newly sourced component varies significantly from the original drawings and specifications. IS&S has not experienced significant delays in delivery of products caused by the inability to obtain either component parts or FAA approval of products incorporating new component parts.

Quality Assurance

Product quality is of vital importance. The Company is ISO 9001 and AS9100D certified. These standards represent an international consensus on effective management practices with the goal of ensuring that a company can deliver its products and related services consistently in a manner that meets or exceeds customer quality requirements. IS&S’s certification to these standards allows the Company to represent to customers that it maintains high-quality industry standards in the education of its employees and in the design and manufacture of its products. In addition, the Company’s products undergo extensive and documented quality control testing prior to being delivered to customers.

Competition

The market for the Company’s products is highly competitive. Competitors vary in size and resources, and substantially all of the Company’s competitors are much larger than IS&S and have substantially greater resources. With respect to air data systems and related products, the Company’s principal competitors include Honeywell International Inc., Collins Aerospace, Thales Defense & Security, Inc., and Garmin Ltd. With respect to flat panel displays, principal competitors currently include Honeywell International Inc., Collins Aerospace, L3Harris Technologies, Inc., Garmin Ltd. and GE Aviation Systems. However, as the flat panel display industry evolves and the demand for flat panel displays increases, IS&S may face future competition in this area from other suppliers. The Company believes that the principal competitive factors in its markets are cost, development cycle time, responsiveness to customer preferences, product quality, technology, and reliability. IS&S believes that its significant and long-standing customer relationships reflect the Company’s ability to compete favorably with respect to these factors.

13

Table of Contents

Intellectual Property and Proprietary Rights

IS&S relies on patents to protect its proprietary technology. As of September 30, 2021, the Company holds 50 U.S. patents and has 8 U.S. patent applications pending relating to its technology. In addition, IS&S holds 124 international patents and has 11 international patent applications pending. Certain of these patents and patent applications cover technology relating to air data measurement systems and others cover technology relating to flat panel display systems and other aspects of the COCKPIT/IP® solution. While IS&S believes these patents have significant value in protecting its technology, it believes that the innovative skill, technical expertise, and know-how of the Company’s personnel in applying the technology reflected in its patents would be difficult, costly, and time consuming to reproduce.

While IS&S is not aware of any pending lawsuits against the Company alleging patent infringement or the violation of other intellectual property rights, it cannot be certain such infringement claims will not be asserted against the Company in the future.

Human Capital

Our people are the driving force behind our success, and our future and growth prospects depend on our ability to attract, train and retain highly qualified personnel. We are fortunate to have talented and outstanding employees, and we are proud of our diverse workforce and the broad range of skills and experiences that our people have. We work hard to cultivate a dynamic and enjoyable work environment full of opportunities to learn new skills, stressing teamwork and encouraging our employees to brainstorm, develop and refine new ideas to help us innovate and achieve our goals, and we maintain equity compensation plans and benefits packages designed to retain talented people who share our goals and interests. We also offer competitive salaries and generous benefits, including vacation, a 401(k) savings and retirement plan, health, dental, life, long-term disability insurance, an Employee Assistance Program (“EAP”), and health and dependent Flexible Spending Account programs. Additionally, we regularly review and reevaluate our recruitment strategies in order to ensure our practices align with our mission, purpose, and values. Nevertheless, competition for such qualified personnel is intense, and the Company may not be able to attract, train, and retain highly qualified personnel in the future.

We are an equal opportunity employer and a Vietnam Era Veterans’ Readjustment Assistance Act (“VEVRAA”) federal contractor. All qualified applicants receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status, or any other characteristic protected by law. We also comply with all applicable state and local laws governing nondiscrimination in employment and have a Code of Business Conduct and Ethics applicable to each employee, director, officer, contractor and consultant of the Company designed to ensure that we maintain the highest standards of business conduct in every aspect of our business and operations.

Safety is a vital aspect to the success of our people and business. We are proud of our employees’ collective commitment to secure and maintain safe work practices, in particular during the COVID-19 pandemic. Protecting the health and safety of our employees and their families has been a priority throughout the pandemic, and we have implemented temperature monitoring, frequent sanitization of workspaces, observance of social distancing protocols, and other increased safety measures in response to the pandemic.

As of September 30, 2021, IS&S had 85 employees (83 of whom were full-time employees). None of our employees are currently represented by a labor union, nor are they subject to a collective bargaining agreement. We consider relations with our employees to be good.

Executive Officers of the Registrant

The following is a list of the Company’s executive officers, their ages and their positions in each case.

​

Geoffrey S. M. Hedrick was the Chief Executive Officer from the time he founded the Company in February 1988 through June 4, 2007 and was reappointed as Chief Executive Officer on September 8, 2008. He has been Chairman of the Board since 1997. Prior to founding IS&S, Mr. Hedrick served as President and Chief Executive Officer of Smiths Industries North American Aerospace

14

Table of Contents

Companies. He founded Harowe Systems, Inc. in 1971, which was subsequently acquired by Smiths Industries. Mr. Hedrick has over 40 years of experience in the avionics industry, and he holds a number of patents in the electronics, optoelectric, electromagnetic, aerospace, and contamination control fields.

Shahram Askarpour has been President since April 2012. Dr. Askarpour joined the Company as a Director of Engineering in 2003, was promoted to Vice President of Engineering in 2005, and was promoted to President on April 2, 2012. Dr. Askarpour has more than 30 years of aerospace industry experience in managerial and technical positions. Prior to joining IS&S, he was employed by Smiths Aerospace (a division of Smiths Group PLC), Instrumentation Technology and Marconi Avionics. He holds a number of key patents in the aviation field. Dr. Askarpour received his engineering education in the United Kingdom and received an undergraduate degree in Electrical Engineering from Middlesex University, a post graduate Certificate of Advanced Study in Systems Engineering, and a PhD in Automatic Control from Brunel University. He was awarded the title of Associate Research Fellow for three consecutive years by Brunel University, and has published numerous papers in leading international, peer reviewed journals. In addition, he has completed management courses at Carnegie Mellon University and finance courses at the Wharton Business School.

Relland M. Winand has been the Company’s Chief Financial Officer since December 15, 2014. Mr. Winand has served in a number of executive financial capacities with public companies including Chief Financial Officer of ECC International, Corp, a manufacturer of computer controlled maintenance simulators primarily for the Department of Defense, and Vice President Finance and Administration of Traffic.com, Inc. a leading provider of accurate, real-time traffic information in the United States. Prior to joining Innovative Solutions and Support, Inc., from 2008 to 2013, Mr. Winand was Chief Financial Officer of Orbit/FR, Inc., an international developer and manufacturer of sophisticated microwave test and measurement systems for aerospace/defense, wireless, satellite and automotive industries. From January 2014 until August 2014, Mr. Winand served as a consultant for Solomon Edwards Group LLC. He has over 30 years’ experience in financial management and reporting for both public domestic and international manufacturing companies. Mr. Winand received a B.S. in Accounting from Drexel University and an M.B.A. in Finance from Widener University.

Other

The SEC maintains a website that contains annual, quarterly, and current reports, proxy statements and information statements, and other information about issuers, including IS&S, that file electronically with the SEC. The public can obtain any document we file with the SEC at www.sec.gov.

IS&S also maintains its corporate website at http://www.innovative-ss.com and makes available, free of charge, on that website (under the “Investor Relations” tab) the Company’s annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those as reasonably practicable after it electronically files such material with, or furnishes it to, the SEC. The information on the Company’s website is not incorporated as part of this Annual Report on Form 10-K.

Item 1A. Risk Factors.

Each reader should carefully consider the risks, uncertainties and other factors described below, in addition to the other information set forth in this report, because they could materially and adversely affect the Company’s business, operating results, financial condition, cash flows, prospects, and the value of an investment in IS&S common stock.

Summary

An investment in our common stock involves various risks, including risks related to the items listed below. However, you are urged to carefully consider all of the matters discussed in this Part I, Item 1A of this Report under the caption “Risk Factors” (not just those discussed in this summary) in considering our business and prospects.

IS&S-Specific Risk Factors

The Company faces risks relating to:

15

Table of Contents

General Risk Factors

The Company faces risks relating to:

IS&S-Specific Risk Factors

Growth of the Company’s customer base could be limited by delays or difficulties in completing development and introduction of planned products or product enhancements. If IS&S fails to enhance existing products, or to develop and achieve market acceptance for flat panel displays, flight management systems, autothrottle technology and other new products that meet customer requirements, its business, reputation and statements of income may be affected adversely.

Currently, IS&S spends a large portion of its R&D efforts in developing and marketing the FPDS, FMS, ThrustSense® Autothrottle and complementary products. The Company’s ability to grow and diversify its operations through introduction and sale of new products is dependent upon its continued success in product development and engineering activities, its sales and marketing efforts, and its ability to obtain necessary regulatory approvals to sell such products. Sales growth will depend in part on market acceptance of and demand for the FPDS, FMS, ThrustSense® Autothrottle and future products. IS&S cannot be certain that it will be able to develop, introduce or market its FPDS, FMS, ThrustSense® Autothrottle or other new products or product enhancements in a timely or cost-effective manner, or that any new products or product enhancements will receive market acceptance or necessary regulatory approval. In addition, the Company’s business is dependent upon maintaining its reputation and relationships with existing customers. If the Company’s performance does not meet its customers’ expectations, the Company’s reputation and its relationships could be

16

Table of Contents

damaged, which may have a material adverse impact on the Company’s business and statements of income, including reductions in sales.

In seeking new customers, the Company may have difficulty in displacing the products of incumbent competitors. IS&S cannot be assured that potential customers will accept its products or that existing customers will not abandon them.

Contracts can be terminated by many of the Company’s customers at any time and, therefore, may not result in sales.

IS&S’s contracts, including contracts with government agencies, includes various terms and conditions that impose certain requirements on IS&S, including the ability of the government agency or general contractor to alter the price, quantity or delivery schedule of the products. Additionally, government agencies and general contractors typically retain the right to terminate the contract at any time at their convenience. Upon alteration or termination of these contracts, IS&S is entitled typically to an equitable adjustment to the contract price so that it would be compensated for delivered items and allowable costs incurred. However, because these contracts can be terminated for convenience, the Company cannot be assured that its backlog will result in sales.

The Company enters into fixed-price contracts or service arrangements to perform specified design and EDC services related to its products that could subject IS&S to losses in the event the Company incurs cost overruns on its projects.

During fiscal year 2021, approximately 1% percent of the Company’s total sales were from fixed-price EDC arrangements with customers to perform specified design and EDC services related to its products. These arrangements allow IS&S to benefit by recovering some of its product development costs, but it carries the risk of potential cost overruns. If the Company’s initial cost estimates are incorrect, it can incur potentially large one time charges and losses on these contracts. These EDC arrangements can expose the Company to potential losses because the customer may compel IS&S to complete a project or, in the event of a termination for default, pay the incremental cost of its replacement by another provider. Because some of these projects involve new technologies and applications, and can last for more than a year, unforeseen events such as technological difficulties, fluctuations in the price of raw materials, problems with subcontractors, and cost overruns can result in the contractual price becoming less favorable or even unprofitable to IS&S over time. Furthermore, if the Company does not meet project deadlines or if its products do not meet customer specifications, it may need to renegotiate contracts on less favorable terms, be forced to pay penalties or liquidated damages, or suffer losses if the customer exercises its right to terminate. The Company’s results of operations are dependent on its ability to maximize earnings from the EDC service arrangements. Lower earnings caused by cost overruns could have a negative impact on the Company’s financial condition, operating results, and cash flows.

A portion of IS&S sales come from government contracts, which could be adversely affected by continued high U.S. federal budget deficits. Government contracts are also subject to special risks as a result of the U.S. government’s audit practices.

A portion of IS&S sales has been, and is expected to continue to be, from defense contractors or government agencies in connection with government aircraft retrofit or OEM contracts. Sales to government contractors and government agencies could decline as a result of DoD spending cuts and general budgetary constraints which may become more severe as the federal budget deficit remains high.

In addition, the U.S. government regularly conducts investigations, inquiries and audits into its suppliers’ compliance with procurement regulations and performance under the relevant government contracts. If an investigation reveals or an audit finds that the Company violated applicable law or regulations, its government contracts could be terminated and it could be restricted from future procurement activities. Moreover, if an investigation, inquiry or audit finds that the Company acted improperly or was involved in illegal activities, the Company could be subject to civil penalties, criminal penalties, and administrative sanctions. As a result, the Company’s reputation could be harmed even if the allegations were later determined to be false.

Reductions in government expenditures could adversely affect IS&S business.

Reductions in funding of the DoD and U.S. defense spending could have significant consequences to the Company’s business and industry. While the full impact of such reductions is not determinable, the impact of any resulting reductions in defense appropriations, and/or reductions in U.S. defense spending could result in delays in procurement of products and services due to lack of funding, and negatively affect the IS&S’s revenues, financial condition and results of operations.

17

Table of Contents

The loss of a key customer or a significant deterioration in the financial condition of a key customer could have a material adverse effect on the Company’s results of operations.

The Company’s revenue is concentrated with a limited number of customers. During fiscal year 2021 IS&S derived 59% of revenue from the top five customers. IS&S expects a relatively small number of customers to account for a majority of its revenues for the foreseeable future. As a result of the concentrated customer base, a loss of one or more of these customers or a dispute or litigation with one of these key customers could affect adversely its revenue and results of operations. The Company monitors and evaluates the credit status of its customers and attempts to adjust sales terms as appropriate. Despite these efforts, a significant deterioration in the financial condition or bankruptcy filing of a key customer could affect adversely the Company’s business, results of operations, and financial condition.

In addition, the Company is subject to credit risk associated with the concentration of accounts receivable from its key customers. If any of the Company’s top customers were to become bankrupt or insolvent or otherwise were unable to pay for the products and services provided by the Company, including as a result of the impact of the COVID-19 pandemic on their businesses or financial conditions, then the Company may incur significant write-offs of accounts receivable, incur other impairment charges or result in a significant loss of expected revenues, which may have a material adverse effect on the Company’s results of operations.

We self-insure a significant portion of our employee medical insurance program, which may expose us to unpredictable costs and negatively affect our financial performance.

We self-insure a significant portion of our employee medical insurance program and related benefit claims. The estimated liability for the self-funded portion of our insurance program is determined actuarially, based on claims filed historically, demographic factors and an estimate of claims incurred but not yet reported. We maintain stop loss insurance coverage to limit our exposure for the self-funded portion of our health insurance program both on a per employee and aggregate basis, and liabilities associated with these losses include estimates of both claims filed and losses incurred but not yet reported. Unanticipated changes in any applicable actuarial assumptions or management estimates underlying our recorded liabilities for these losses could result in materially different amounts of expense than expected under these programs, which could have a material adverse effect on our financial condition and results of operations. In addition, the premiums for this coverage could increase in the future, or we could be forced to raise our self-insured retention amounts. If these expenses increase, or if we experience a claim in excess of our reserve and/or coverage limits, it could also have a material adverse effect on our financial condition and results of operation.

We currently operate without a substantial backlog.

During periods of economic uncertainty, the rate of customer orders can quickly decrease, and a substantial backlog may help promote greater efficiency in production, facilitate business planning and improve revenue visibility. As of September 30, 2021, 4% of the Company’s backlog was expected to be filled beyond fiscal 2022, which is below the Company’s historical expectations and may result in lower revenues in future periods. As a result, future revenue will be dependent on orders booked and shipped in that quarter, and may not be predictable with any degree of certainty. Furthermore, certain contracts may represent a significant portion of our revenue and profits for a quarter such that the loss or deferral of even one such contract could adversely affect our revenue and profitability.

The Company has limited experience in marketing and distributing its products internationally.

IS&S plans to derive increasing revenues from sales outside the United States, particularly in Europe and Asia. Risks inherent in doing business internationally include:

18

Table of Contents

Currently, all of the Company’s international sales are denominated in U.S. dollars. An increase in the dollar’s value compared to other currencies could render the Company’s products less competitive in the international markets. In the future, IS&S may be required to conduct sales in the foreign country’s local currency, thus exposing it to fluctuations and volatility in exchange rates that could adversely affect its operating results. Further, as we pursue customers in Asia and other less developed markets throughout the world, our potential inability to ensure the creditworthiness of counterparties could impose additional risks and affect our overall profitability. Emerging market operations in particular can present many risks, including cultural differences (such as employment and business practices), volatility in gross domestic product, economic and government instability, and the imposition of exchange controls and capital controls.

While these factors and their impact are difficult to predict, any one or more of them could have a material adverse effect on our competitive position, results of operations, cash flows or financial condition.

The Company’s competition includes other manufacturers of air data systems and flight information displays against whom it may not be able to compete successfully.

The markets for the Company’s products are intensely competitive and subject to rapid technological change. Competitors include Honeywell International Inc., Collins Aerospace, Thales Defense & Security, Inc., Garmin Ltd. and GE Aviation Systems. All these competitors have substantially greater financial, technical, and human resources than does IS&S. In addition, these competitors have much greater experience in and resources for marketing their products. As a result, these competitors may be able to respond more quickly to new or emerging technologies and customer preferences, or to devote greater resources to development, promotion and sale of their products than IS&S can. The Company’s competitors may have greater name recognition and more extensive customer bases. Such competition could result in price reductions, fewer customer orders, reduced gross margins, and loss of market share.

General Risk Factors

The ongoing COVID-19 pandemic may adversely affect IS&S.

The ongoing global outbreak of coronavirus, which was declared a pandemic by the World Health Organization on March 11, 2020 and a national emergency by the President of the United States on March 13, 2020, has caused and is continuing to cause business slowdowns and shutdowns and turmoil in the financial markets both in the United States and abroad. IS&S is monitoring the impact of the COVID-19 pandemic on its business, including how it has impacted and will impact the Company’s employees, customers, suppliers and distribution channels. The COVID-19 pandemic, as well as the quarantines and other governmental and non-governmental restrictions that have been imposed throughout the world in an effort to contain or mitigate the spread of the coronavirus, has created significant volatility, uncertainty and disruption which may adversely affect IS&S’ business and has caused and is continuing to cause significant market turbulence and disruption that may continue for some time even after business restrictions are lifted and the threat of the coronavirus diminishes. For example, governmental authorities in several jurisdictions have recently implemented or reimplemented orders mandating the cessation of all business activity that is deemed non-essential and, although the Company’s business has to date been deemed essential in many affected markets, there is a risk that these shutdown orders will be extended or expanded or that similar shutdown orders will be implemented in other regions.

While the Company has not yet seen a material impact from the COVID-19 pandemic on its business, financial position, liquidity, or ability to service customers or maintain critical operations, the nature and magnitude of this unprecedented crisis’ ultimate impact on the Company will depend on numerous evolving factors, future developments and cascading effects of the coronavirus pandemic that the Company is not able to predict, including: the duration and severity of the COVID-19 pandemic and the international actions and business restrictions that are being undertaken and implemented as a result of it; governmental, business and other responses to the COVID-19 pandemic, including the promotion of “social distancing,” the issuance of shelter in place orders and restrictions on the Company’s operations, and the possibility that government officials may mandate that the Company provide products or services; the possibility that the COVID-19 pandemic will directly or indirectly delay the issuance of required government approvals, including necessary certifications from the FAA; potential disruptions in the Company’s supply chain; the impact of the COVID-19 pandemic on the Company’s ability to execute its short term and long-term business strategies and initiatives; the extent to which forced remote working arrangements reduce the Company’s ability to manage its business effectively; the extent to which staffing shortages due to members of the Company’s workforce being quarantined or exposed to the coronavirus may be detrimental to the Company’s

19

Table of Contents

operations; and the possibility that federal or state governments (including government agencies such as the Treasury Department, the Small Business Administration or the SEC) could promulgate new statutes, regulations, guidance or relief measures, or rescind or modify existing statutes, regulations, guidance or relief measures, in a way that is detrimental to the Company or its business in light of the Company’s prior Paycheck Protection Program loan.

In addition, while the Company cannot predict the magnitude of the impact that the COVID-19 pandemic will have on its customers and suppliers or their financial conditions, any material effect on the Company’s customers or suppliers could adversely impact the Company. For example, the Company’s customers or suppliers may themselves assert, or attempt to terminate various agreements and arrangements with us on the basis of, contractual force majeure provisions, and any termination of a significant commercial agreement may adversely harm our operations. Earlier in the 2020 fiscal year, certain of the Company’s customers temporarily suspended product deliveries as a result of the COVID-19 pandemic, and while these deliveries subsequently resumed, there is a possibility that the COVID-19 pandemic will result in other suspensions, delays or order cancellations by the Company’s customers or suppliers. Additionally, the COVID-19 pandemic and related travel restrictions and other containment efforts have had a significant impact on the travel industry, which may result in reduced demand for products in the general aviation and commercial air transport markets and therefore for the Company’s products and systems. The impact of the COVID-19 pandemic may also exacerbate other risk factors described under this Part I, Item 1A of this Report, any of which could have a material effect on the Company. For example, the risks associated with potential cybersecurity threats may be magnified given that many of the Company’s employees are currently working remotely using personal electronic devices and home internet connections.

The extent of the impact of the COVID-19 pandemic on the Company’s business is highly uncertain and difficult to predict, as information is rapidly evolving with respect to the duration and severity of the COVID-19 pandemic. At this point, the Company cannot reasonably estimate the duration and severity of the COVID-19 pandemic or its overall impact on the Company’s business.

If IS&S is unable to respond to rapid technological change, its products could become obsolete and its reputation could suffer.

Future generations of flat panel displays, air data systems, engine and fuel displays, flight management systems and autothrottle technology which embody new technologies or new industry standards could render the Company’s products obsolete. The market for aviation products is subject to rapid technological change, new product introductions, changes in customer preferences, and evolving industry standards and government regulations. The Company’s future success will depend on its ability to:

If IS&S fails to modify or improve its products in response to evolving industry standards and government regulations, its products could rapidly become obsolete.

The Company’s products are currently subject to direct regulation by the FAA and other equivalent organizations. The Company’s products, as they relate to aircraft applications, must be approved by the FAA, EASA, or other equivalent organizations before they can be installed in an aircraft. To be certified, IS&S must demonstrate that its products are accurate and able to maintain certain levels of repeatability over time. Although the certification requirements of the FAA and EASA are substantially similar, no formal reciprocity exists between the two regulators. Accordingly, even though the Company’s products are FAA approved, the Company may need to obtain approval from EASA or other appropriate organizations to have them certified for installation outside the United States.

Significant delay in receiving certification for newly developed products or enhancements to the Company’s products, or the loss of certification for its existing products, could result in lost sales or delays in sales. Furthermore, new regulations or product standards, and changes to existing product standards could require IS&S to change its products and underlying technology. IS&S cannot ensure that it will receive regulatory approval on a timely basis or at all.

20

Table of Contents

IS&S relies on third-party suppliers for components of its products, including any necessary raw materials, and any interruption in the supply of these components could hinder its ability to deliver products on a timely basis.

The Company’s manufacturing process consists primarily of assembling components purchased from its supply chain. The suppliers may not continue to be available to IS&S, including as a result of the impact of the COVID-19 pandemic on their businesses or financial conditions. If the Company is unable to maintain relationships with key third-party suppliers, the development and distribution of its products could be delayed until equivalent components can be obtained and integrated into the products. In addition, substitution of certain components from other manufacturers may require product redesign or FAA, EASA or other approvals, which could delay the Company’s ability to ship products, and any increase in component costs, including the costs of any necessary raw materials, in the Company’s supply chain could adversely affect the Company’s results of operations.

Inasmuch as the Company’s products utilize sophisticated technology and are deployed in complex aircraft cockpit environments, problems with these products may arise that could harm the Company’s reputation for quality assurance and, consequently, its business prospects.

The Company’s products use complex system designs and components that may contain errors, omissions, or defects, particularly when the Company incorporates new technologies into its products or when it releases new versions or enhancements of its existing products. Despite the Company’s quality assurance process, errors, omissions or defects could occur in its current products, in new products, or in new versions or enhancements of existing products. IS&S may be required to redesign or recall those products or pay damages. Such an event could result in the following:

Although IS&S carries product liability insurance, this insurance may not be adequate to cover its losses in the event of a large product liability claim. In addition, IS&S may not be able to maintain such insurance in the future.

The Company’s success depends on its ability to protect its proprietary rights against potential risk of infringement. If IS&S is unable to protect and enforce its intellectual property rights, it may be unable to compete effectively.

The Company’s success and ability to compete will depend in part on its ability to obtain and maintain patent or other protection for its technology and products, both in the United States and internationally. In addition, IS&S must operate without infringing the proprietary rights of others.

As of September 30, 2021, IS&S holds 50 U.S. patents and has 8 U.S. patent applications pending relating to its technology. In addition, the Company holds 124 international patents and has 11 international patent applications pending. IS&S cannot be certain that patents will be issued on any of its present or future applications. In addition, existing patents or future patents may not adequately protect the Company’s technology if they are not broad enough or are successfully challenged, or if other entities are able to develop competing methods without violating its patents. If IS&S is not successful in protecting its intellectual property, competitors could begin to offer products that incorporate its technology. Patent protection involves complex legal and factual questions, and, therefore, is highly uncertain. Litigation relating to intellectual property is often very time consuming and expensive. If a successful claim of patent infringement were made against IS&S, and if the Company were unable to develop non-infringing technology, or to license the infringed or similar technology on a timely and cost-effective basis, the Company might not be able to produce and sell some of its products. Further, IS&S has incurred, and may continue to incur, significant legal and other costs in defense of its intellectual property.

IS&S depends on key personnel to manage its business effectively, and an inability to retain its key employees and plan for management succession could adversely impact the Company’s ability to compete.

The Company’s success depends on the efforts, abilities, and expertise of its senior management and other key personnel. There can be no assurance IS&S will be able to retain such employees, and the loss of some could damage its ability to execute its business

21

Table of Contents

strategy. The Company intends to continue hiring key management, engineering, and sales and marketing personnel. Competition for skilled personnel is intense, and IS&S may not be able to attract or retain additional qualified personnel.

The Company’s future success will depend in part on its ability to implement and improve its operational, administrative and financial systems and controls and to manage, train and expand its employee base. IS&S cannot provide assurance that current and planned personnel levels, systems, procedures, and controls will be adequate to support its current and future customer base. In such a circumstance, the Company may not be able to fully capitalize on existing and potential market opportunities. Any delays or difficulties encountered could impair the Company’s ability to attract new customers or maintain its relationships with existing customers. In addition, effective succession planning is important to our long-term success. Failure to ensure effective transfer of knowledge and smooth transitions involving senior management and other key personnel could hinder our strategic planning and execution.

The Company’s revenue and operating results may vary significantly from quarter to quarter, which may cause its stock price to decline.

The Company’s revenue and operating results may vary significantly from quarter to quarter because of a number of factors, including, but not limited to:

A cyber security incident or other technology disruption could have a negative impact on our business.

We face certain security threats and technology disruptions, including threats to our information technology (“IT”) infrastructure, attempts to gain access to our or our customers’ proprietary or classified information, threats of terrorism events, and failures of our technology tools and systems. Our IT networks and related systems are critical to the operation of our business and essential to our ability to successfully perform day-to-day operations. We are also involved with IT systems for certain customers and other third parties, for which we face similar security threats as for our own, in particular the DoD. In particular, cybersecurity threats—which include, but are not limited to, computer viruses, spyware and malware, attempts to access information, denial of service attacks and other electronic security breaches—are persistent and evolve quickly. In general, such threats have increased in frequency, scope and potential impact in recent years. Further, a variety of technological tools and systems, including both company-owned IT and technological services provided by outside parties, support our critical functions. These technologies, as well as our products, are subject to failure and the user’s inability to have such technologies properly supported, updated, expanded or integrated into other technologies and, in certain cases, may contain open source and third-party software which may unbeknownst to us contain defects or viruses that pose unintended risks. These risks, if not effectively mitigated or controlled, could materially harm our business or reputation. While we believe that we have implemented appropriate measures and controls, there can be no assurance that such actions will be sufficient to prevent disruptions to critical systems, unauthorized release of confidential information or corruption of data.

The security measures we have implemented may become subject to third-party security breaches, employee error, malfeasance, faulty password management or other irregularities. For example, third parties may attempt to fraudulently induce employees or customers into disclosing user names, passwords or other sensitive information, which may in turn be used to access our IT systems. These security systems cannot provide absolute security. To the extent we were to experience a breach of our systems and were unable to protect sensitive data, such a breach could materially damage business partner and customer relationships, and curtail or otherwise impact the use of our IT systems. Moreover, if a security breach of our IT systems affects our computer systems or results in the release of personally identifiable or other sensitive information of customers, business partners, employees and other third parties, our reputation and brand could be materially damaged, use of our products and services could decrease, and we could be exposed to a risk of loss, litigation and potential liability.

22

Table of Contents

Such an event could require significant management attention and resources, negatively impact our reputation among our customers and the public and challenge our eligibility for future work on sensitive or classified systems, which could have a material adverse effect on our business, financial condition and results of operations.

Litigation with customers, employees and others could harm our reputation and impact operating results.

In the ordinary course of business, we may be involved in lawsuits and regulatory actions with customers, employees and others. Additionally, we may be subject to employment-related claims alleging discrimination, harassment, wrongful termination and wage issues, including those relating to overtime compensation. We are susceptible to claims filed by customers alleging responsibility for breaches of contract or from product defects, and we are also subject to lawsuits filed by patent holders alleging patent infringement. These types of claims, as well as other types of lawsuits to which we are subject from time to time, can distract management’s attention from core business operations and impact operating results, particularly if a lawsuit results in an unfavorable outcome, or could harm the Company’s reputation with customers, employees, investors and others.

Tax changes could affect the Company’s effective tax rate and future profitability.

The Company’s future results could be affected negatively by changes in the effective tax rate as a result of changes in the overall profitability and changes to statutory tax rates in the United States and in other jurisdictions, changes in tax legislation, and the results of audits and examinations of previously filed tax returns. In addition, adverse changes in the underlying profitability and financial outlook of our operations or future changes in tax law could lead to changes in the value of tax assets or liabilities that we currently or in the future may hold, which could materially affect our results of operations. Further, the nature and impact of any future changes to tax law, and the resulting impact on our business, financial condition and results of operations, are uncertain.

The Company is subject to various laws and regulations. Changes to, or failure by the Company to comply with, these laws and regulations could have a significant impact on the Company’s business and operations.

The Company is subject to, and must comply with, various laws and regulations, including, but not limited to, the product-related and other regulations of the FAA and the EASA, U.S. government procurement regulations, the rules and regulations of the SEC, and local, state, federal, and international tax codes, import and export controls and customs laws, employment and employment-related laws, environmental laws, intellectual property laws, and consumer protection statutes. Failure to comply with all applicable laws could result in investigation and remediation costs to the Company and could adversely impact the operations and profits of the Company. In addition, the evolving and at times overlapping regulatory regimes to which the Company is subject may change at any time, including as a result of the upcoming change in the U.S. presidential administration. Any changes to existing laws or regulations, or the adoption of new laws or regulations, could increase our compliance costs and operating costs. In addition, failure to timely comply with regulatory changes could cause payments to be withheld and/or an impact on future business.

The economic effects of the United Kingdom’s exit from the European Union may affect relationships with existing and future customers and could have an adverse impact on our business, financial condition, operating results and cash flows.

In June 2016, the United Kingdom (the “U.K.”) held a referendum in which voters approved an exit from the European Union (“E.U.”), commonly referred to as “Brexit.” The U.K. formally exited the E.U. on January 30, 2020, which exit was followed by a transitional period which ended on December 31, 2020. On December 24, 2020, the E.U. and the U.K. agreed to terms of a trade and cooperation agreement which sets out the terms of their future relationship (the “Trade Agreement”). The Trade Agreement offers U.K. and E.U. businesses preferential access to each other’s markets, ensuring imported goods will be free of tariffs and quotas. However, economic relations between the U.K. and the E.U. will now be on more restricted terms than before and there remains uncertainty around the post-Brexit regulatory environment, as the provisions of the Trade Agreement do not cover the services sector.

As a result of Brexit, the global markets and currencies have been adversely impacted, including a decline in the value of the British pound as compared to the U.S. dollar. A potential devaluation of the local currencies of our international customers relative to the U.S. dollar may impair the purchasing power of our international customers and could cause international customers to decrease their volume of orders or cancel orders completely.

Brexit may also lead to legal uncertainty and potentially divergent national laws and regulations as the U.K. determines which E.U. laws to replace or replicate, and those laws and regulations may be cumbersome, difficult or costly in terms of compliance. Any of these effects of Brexit, among others, could adversely affect our business, financial condition, operating results and cash flows.

23

Table of Contents

Volatility and weakness in capital markets may adversely affect credit availability and related financing costs, which could adversely affect IS&S.

Bank and capital markets can experience periods of volatility and disruption. During these periods of volatility and disruption, risks to IS&S include:

If the Company fails to maintain an effective system of internal control over financial reporting, it may not be able to accurately report its financial condition, results of operations or cash flows, which may adversely affect investor confidence in the Company and, as a result, the value of the Company’s common stock.

The Sarbanes-Oxley Act of 2002, as amended (the “Sarbanes-Oxley Act”) requires, among other things, that the Company maintain effective internal control over financial reporting and disclosure controls and procedures. Under Section 404 of the Sarbanes-Oxley Act, the Company is required to furnish a report by management on, among other things, the effectiveness of the Company’s internal control over financial reporting. This assessment must include disclosure of any material weaknesses identified by management in the Company’s internal control over financial reporting. A material weakness is a control deficiency, or combination of control deficiencies, in internal control over financial reporting that results in more than a reasonable possibility that a material misstatement of annual or interim financial statements will not be prevented or detected on a timely basis. Section 404 of the Sarbanes-Oxley Act also generally requires an attestation from the Company’s independent registered public accounting firm on the effectiveness of the Company’s internal control over financial reporting.

The Company’s compliance with Section 404 requires that it compile the system and process documentation necessary to perform an appropriate evaluation. During the evaluation and testing process, if the Company identifies one or more material weaknesses in its internal control over financial reporting, it will be unable to assert that its internal control over financial reporting is effective. The Company cannot assure you that there will not be material weaknesses or significant deficiencies in its internal control over financial reporting in the future. Any failure to maintain internal control over financial reporting could severely inhibit the Company’s ability to accurately report its financial condition, results of operations or cash flows. If the Company is unable to conclude that its internal control over financial reporting is effective, or if its independent registered public accounting firm determines the Company has a material weakness or significant deficiency in its internal control over financial reporting once that firm begin its reviews, the Company could lose investor confidence in the accuracy and completeness of its financial reports, the market price of its common stock could decline, and it could be subject to sanctions or investigations by NASDAQ, the Securities and Exchange Commission or other regulatory authorities. Failure to remedy any material weakness in the Company’s internal control over financial reporting, or to implement or maintain other effective control systems required of public companies, could also restrict the Company’s future access to the capital markets.

Item 1B. Unresolved Staff Comments.

None

Item 2. Properties.

In fiscal 2001, IS&S purchased 7.5 acres of land in the Eagleview Corporate Park in Exton, Pennsylvania. Shortly thereafter, the Company constructed a 45,000 square foot design, manufacturing and office facility on this site. Land development approval allows for expansion of up to 20,400 square feet. Such expansion would provide for a 65,400 square foot facility which the Company believes is adequate to meet the needs of the Company for the foreseeable future.

The Company had occupied approximately 8,358 square feet of office and warehouse space in Exton, Pennsylvania under a lease that expired March 2021. The Company’s fiscal year ended September 30, 2021, lease expense for this property was approximately $34,000.

24

Table of Contents

The Company leases two separate hangars to house the Company’s airplanes in New Castle County, Delaware under month-to-month leases. The annual lease expense for both hangars is approximately $53,000.

Item 3. Legal Proceedings.

In the ordinary course of business, IS&S is at times subject to various legal proceedings and claims. The Company does not believe any such matters that are currently pending will, individually or in the aggregate, have a material effect on the results of operations or financial position.

Item 4. Mine Safety Disclosures.

Not applicable.

PART II

Item 5. Market for the Registrant’s Common Equity, Related Stockholder Matters, and Issuer purchases of Equity Securities.

The Company’s common stock has been traded on the NASDAQ Global Select Market(R) tier of the NASDAQ Stock Market, LLC under the symbol “ISSC” since its initial public offering on August 4, 2000.

Many of our shares of common stock are held by brokers and other institutions on behalf of stockholders, as a result, we are unable to estimate the total number of stockholders represented by these record holders.

On September 4, 2020, the Company’s Board of Directors declared a special cash dividend in the amount of $0.65 per share, payable on October 1, 2020 to shareholders of record as of the close of business on September 15, 2020. The total dividend payment was approximately $11.2 million.

On December 10, 2020, the Company's Board of Directors declared a special cash dividend in the amount of $0.50 per share, payable on December 30, 2020 to shareholders of record as of the close of business on December 21, 2020. The total dividend payment was approximately $8.6 million.

The Company did not pay dividends in fiscal 2019. The declaration and payment of any dividend in the future will be at the discretion of the Company’s Board of Directors.

25

Table of Contents

The graph below shows the cumulative shareholder return on $100 invested at the market close on September 30, 2016 through and including September 30, 2021, the last trading day before the end of the Company’s most recently completed fiscal year, with the cumulative total return over the same time period of the same amount invested in the NASDAQ Composite Index, the Russell 2000 Index, and the Dow Jones US Aerospace & Defense Index.

​

​

26

Table of Contents

Item 6. Selected Consolidated Financial Data.

The following tables present portions of the Company’s consolidated financial statements. The following selected consolidated financial data set forth below should be read together with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the consolidated financial statements and related notes to the consolidated financial statements appearing elsewhere herein. The selected statement of operations data for the fiscal years ended September 30, 2021, 2020 and 2019 and the balance sheet data as at September 30, 2021 and 2020 are derived from the Company’s audited consolidated financial statements included elsewhere in this Annual Report on Form 10-K. The selected statements of operations data for the fiscal years ended September 30, 2018 and 2017 and the balance sheet data as at September 30, 2019, 2018 and 2017 are extracted from the Company’s audited consolidated financial statements that are not included in this Annual Report on Form 10-K.

​

Amounts may not add due to rounding.

​

​

​

27

Table of Contents

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations.

Objective

The following discussion provides an analysis of the Company’s financial condition, cash flows and results of operations from management’s perspective and should be read in conjunction with “Selected Consolidated Financial Data” and the consolidated financial statements and related notes included in this report. Our objective is to also provide discussion of events and uncertainties known to management that are reasonably likely to cause reported financial information not to be indicative of future operating results or of future financial condition and to offer information that provides understanding of our financial condition, cash flows and results of operations.

Overview

Innovative Solutions and Support, Inc. (the “Company,” “IS&S”, “we” or “us”) was incorporated in Pennsylvania on February 12, 1988. The Company operates in one business segment as a systems integrator that designs, develops, manufactures, sells, and services, air data equipment, engine display systems, standby equipment, primary flight guidance, autothrottles and cockpit display systems for retrofit applications and original equipment manufacturers (“OEMs”). The Company supplies integrated Flight Management Systems (“FMS”), Flat Panel Display Systems (“FPDS”), FPDS with Autothrottle, air data equipment, Integrated Standby Units (“ISU”), ISU with Autothrottle and advanced Global Positioning System (“GPS”) receivers that enable reduced carbon footprint navigation.

The Company has continued to position itself as a system integrator, which provides the Company with the capability and potential to generate more substantive orders over a broader product base. This strategy, as both a manufacturer and integrator, is designed to leverage the latest technologies developed for the computer and telecommunications industries into advanced and cost-effective solutions for the general aviation, commercial air transport, United States Department of Defense (“DoD”)/governmental, and foreign military markets. This approach, combined with the Company’s industry experience, is designed to enable IS&S to develop high-quality products and systems, to reduce product time to market and to achieve cost advantages over products offered by its competitors.

The Company sells to both the OEM and the retrofit markets. Customers include various OEMs, commercial air transport carriers and corporate/general aviation companies, DoD and its commercial contractors, aircraft operators, aircraft modification centers, government agencies, and foreign militaries. Occasionally, IS&S sells its products directly to DoD; however, the Company sells its products primarily to commercial customers for end use in DoD programs. Sales to defense contractors are generally made on commercial terms, although some of the termination and other provisions of government contracts are applicable to these contracts. The Company’s retrofit projects are generally pursuant to either a direct contract with a customer or a subcontract with a general contractor to a customer (including government agencies).

Cost of sales related to product sales comprises material, components and third-party avionics purchased from suppliers, direct labor, and overhead costs. Many of the components are standard, although certain parts are manufactured to meet IS&S specifications. The overhead portion of cost of sales primarily comprises salaries and benefits, building occupancy costs, supplies, and outside service costs related to production, purchasing, material control, and quality control. Cost of sales includes warranty costs.

Cost of sales related to Engineering Development Contracts (“EDC”) sales comprises engineering labor, consulting services, and other costs associated with specific design and development projects. These costs are incurred pursuant to contractual arrangements and are accounted for typically as contract costs within cost of sales, with the reimbursement accounted for as a sale in accordance with the percentage-of-completion method or completed contract method of accounting. Company funded research and development (“R&D”) expenditures relate to internally-funded efforts for the development of new products and the improvement of existing products. These costs are expensed as incurred and reported as R&D expenses. The Company intends to continue investing in the development of new products that complement current product offerings and to expense associated R&D costs as they are incurred.

Selling, general and administrative expenses consist of sales, marketing, business development, professional services, salaries and benefits for executive and administrative personnel, facility costs, recruiting, legal, accounting and other general corporate expenses.

IS&S sells its products to agencies of the United States and foreign governments, aircraft operators, aircraft modification centers, and OEMs. Customers have been and may continue to be affected by changes in economic conditions both in the United States and abroad. Such changes may cause customers to curtail or delay their spending on both new and existing aircraft. Factors that can impact

28

Table of Contents

general economic conditions and the level of spending by customers include, but are not limited to, the impact of the ongoing COVID-19 pandemic, general levels of consumer spending, increases in fuel and energy costs, conditions in the real estate and mortgage markets, labor and healthcare costs, access to credit, consumer confidence, and other macroeconomic factors that affect spending behavior. Furthermore, spending by government agencies may be reduced in the future if tax revenues decline. If customers curtail or delay their spending or are forced to declare bankruptcy or liquidate their operations because of adverse economic conditions, the Company’s revenues and results of operations would be affected adversely. For example, earlier in the 2020 fiscal year, certain of the Company’s customers temporarily suspended product deliveries as a result of the COVID-19 pandemic, and while these deliveries subsequently resumed, there is a possibility that the COVID-19 pandemic will result in other suspensions, delays or order cancellations by the Company’s customers or suppliers.

In particular, the ongoing COVID-19 pandemic is a significant event, driver of market trends, and source of uncertainty that may ultimately have a direct or indirect material impact on the Company’s business, financial position, liquidity, or ability to service customers or maintain critical operations. In direct response to the COVID-19 pandemic, the Company has taken specific actions to seek to ensure the safety of its employees, including temperature monitoring, frequent sanitization of workspaces, observance of social distancing protocols, and other increased safety measures.

Results of Operations

The following table sets forth statements of operations data expressed as a percentage of total net sales for the fiscal years indicated:

​

​

29

Table of Contents

Fiscal Year Ended September 30, 2021 Compared to Fiscal Year Ended September 30, 2020

Net sales. Net sales for fiscal 2021 increased $1.4 million, or 6.7%, to $23.0 million from $21.6 million for fiscal 2020. For fiscal 2021, product sales increased $1.9 million and EDC sales decreased $0.5 million, in each case, compared to fiscal 2020. This increase in product sales primarily reflects increased shipments for OEM programs to general aviation customers and displays for retrofit programs to commercial transport customers. These increases were partially offset by reduced shipments under the U.S. Navy F-5 production contract and displays for retrofit programs to other military customers compared to fiscal 2020. The decrease in EDC sales was primarily the result of the completion of a modification contract with the U.S. Navy in 2020.

Cost of sales. Cost of sales was $10.3 million or 44.5% of net sales, for fiscal 2021 compared to $9.8 million, or 45.3% of net sales, in fiscal 2020. The increase in cost of sales was primarily the result of an increase in product sales volume. The Company’s overall gross margin in fiscal 2021 was 55.5% compared to 54.7% in fiscal 2020. The fiscal 2021 gross margin percentage increase was attributable to product mix as well as the favorable leverage achieved by the growth in revenues.

Research and development. R&D expense was $2.6 million for fiscal 2021 and $3.0 million for fiscal 2020. R&D expense decreased to 11.4% of net sales in fiscal 2021 compared to 13.7% of net sales in fiscal 2020. This decrease in R&D expense was primarily the result of a decrease in third party costs related to STC certifications offset by an increase in payroll and payroll related benefits.

Selling, general, and administrative (“SG&A”). SG&A expense increased $0.2 million or 2.6% to $6.3 million or 27.2% of net sales, for fiscal 2021 from $6.1 million, or 28.2%, for fiscal 2020. The increase in SG&A expense was primarily the result of an increase in employee stock compensation, payroll and payroll related benefits.

Interest income, net. Net interest income of $1,234 in fiscal 2021 decreased by $153,716 as compared to fiscal 2020 interest income of $154,950. The decrease in interest income was primarily the result of decreased cash balance and lower interest rates in fiscal 2021 as compared to fiscal 2020.

Other income. Other income is primarily composed of royalties earned and increased by $14,409, to $74,906 in fiscal 2021 from $60,497 in fiscal 2020.

Income taxes. Income tax benefit for the fiscal 2021 was $1,087,783 as compared to income tax benefit of $308,882 for fiscal 2020. The effective tax rate benefit for fiscal 2021 was 27.4% and differs from the statutory rate primarily due to the release of the valuation allowance for all federal and state deferred tax assets with the exception of certain state net operating losses for jurisdictions in which the Company does not believe these net operating losses are more likely than not to be realized. This release both increased the deferred tax asset and removed the valuation allowance.

Net income. As a result of the factors described above, the Company’s net income for fiscal 2021 was $5.1 million compared to net income of $3.3 million for fiscal 2020. On a fully diluted basis, net income per share was $0.29 for fiscal 2021, compared to a net income of $0.19 per share for fiscal 2020.

​

30

Table of Contents

Fiscal Year Ended September 30, 2020 Compared to Fiscal Year Ended September 30, 2019

Net sales. Net sales for fiscal 2020 increased $4.0 million, or 22.9%, to $21.6 million from $17.6 million for fiscal 2019. For fiscal 2020, product sales increased $4.6 million and EDC sales decreased $0.6 million, in each case, compared to fiscal 2019. This increase in product sales primarily reflects increased shipments for OEM programs to general aviation customers, shipments under the U.S. Navy F-5 production contract and increased shipments of displays for retrofit programs to other military customers. These increases were partially offset by reduced shipments of displays for retrofit programs to commercial transport customers compared to fiscal 2019. The decrease in EDC sales was primarily the result of the completion of a development contract for a new air data computer for the U.S. Navy F-5 aircraft and the completion of a development contract in 2019 for a foreign customer on the P-3 aircraft.,

Cost of sales. Cost of sales was $9.8 million or 45.3% of net sales, for fiscal 2020 compared to $7.7 million, or 43.7% of net sales, in fiscal 2019. The increase in cost of sales was primarily the result of an increase in product sales volume. The Company’s overall gross margin in fiscal 2020 was 54.7% compared to 56.3% in fiscal 2019. The fiscal 2020 gross margin percentage decrease reflects increased warranty costs and material costs which was partially offset by an increase in gross margin on EDC programs to 71.5% in fiscal 2020 as compared to 54.7% in fiscal 2019.

Research and development. R&D expense was $3.0 million for fiscal 2020 and $2.5 million for fiscal 2019. R&D expense decreased to 13.7% of net sales in fiscal 2020 compared to 14.2% of net sales in fiscal 2019. R&D expense in fiscal 2020 was $0.5 million greater than fiscal 2019. This increase in R&D expense resulted primarily from increased personnel, related benefits and the reduction of EDC contract activity whose costs are reflected in cost of sales rather than R&D expense.

Selling, general, and administrative (“SG&A”). SG&A expense increased $0.2 million or 3.8% to $6.1 million or 28.2% of net sales, for fiscal 2020 from $5.9 million, or 33.4%, for fiscal 2019. The increase in SG&A expense was primarily the result of increased personnel costs and related benefits.

Interest income, net. Net interest income of $154,950 in fiscal 2020 decreased by $94,670 as compared to fiscal 2019 interest income of $249,620. The decrease in interest income was primarily the result of lower interest rates in fiscal 2020 as compared to fiscal 2019.

Other income. Other income is primarily composed of royalties earned and decreased by $13,240, to $60,497 in fiscal 2020 from $73,737 in fiscal 2019.

Income taxes. Income tax benefit for the fiscal 2020 was $308,882 as compared to income tax expense of $1,805 for fiscal 2019. The effective tax rate benefit for fiscal 2020 was 10.43% and differs from the statutory rate due to the passing of the CARES Act on March 27, 2020 which allowed for the carryback of the 2018 net operating loss (“NOL”) to fiscal 2017 and fiscal 2016.

Net income. As a result of the factors described above, the Company’s net income for fiscal 2020 was $3.3 million compared to net income of $1.9 million for fiscal 2019. On a fully diluted basis, net income per share was $0.19 for fiscal 2020, compared to a net income of $0.11 per share for fiscal 2019.

Liquidity and Capital Resources

The following table highlights key financial measurements of the Company:

​

31

Table of Contents

​

The Company’s principal source of liquidity has been cash flows from current year operations and cash accumulated from prior years’ operations. Cash is used principally to finance inventory, accounts receivable, contract assets, and payroll. Apart from what has been disclosed above, management is not aware of any trends, events or uncertainties that have had or are likely to have a material impact on our liquidity, financial condition and capital resources.

On September 4, 2020, the Company’s Board of Directors declared a special cash dividend in the amount of $0.65 per share, payable on October 1, 2020 to shareholders of record as of the close of business on September 15, 2020. The total dividend payment was approximately $11.2 million and is included in restricted cash on the accompanying consolidated balance sheets.

On December 10, 2020, the Company’s Board of Directors declared a special cash dividend in the amount of $0.50 per share, payable on December 30, 2020 to shareholders of record as of the close of business on December 21, 2020. The total dividend payment was approximately $8.6 million.

The Company did not pay dividends in fiscal 2019. The declaration and payment of any dividend in the future will be at the discretion of the Company’s Board of Directors.

The ongoing COVID-19 pandemic is a significant event, driver of market trends, and source of uncertainty that may have a material impact on the Company’s liquidity, financial condition, capital resources, cash flows or operating results. In direct response to the COVID-19 pandemic, the Company has taken specific actions to seek to ensure the safety of its employees, including temperature monitoring, frequent sanitization of workspaces, observance of social distancing protocols, and other increased safety measures.

Operating Activities

The Company generated $4.6 million of cash in operating activities during fiscal 2021 as compared to cash generated of $2.2 million during fiscal 2020. The cash generated by operating activities for the year ended September 30, 2021 was primarily generated by net income of $5.1 million, depreciation and amortization of $0.4 million and a decrease in accounts receivable of $0.3 million, partially offset by an increase in deferred income tax assets of $1.2 million.

The Company generated $2.2 million of cash in operating activities during fiscal 2020 as compared to cash generated of $2.1 million during fiscal 2019. The cash generated by operating activities for the year ended September 30, 2020 was primarily generated by net income of $3.3 million, depreciation and amortization of $0.4 million and an increase in both contract liability of $0.3 million and accrued expenses of $0.2 million, partially offset by an increase in accounts receivable of $2.0 million.

Investing Activities

Cash used in investing activities was $0.3 million for fiscal year 2021 and consisted of spending for manufacturing facility and laboratory test equipment. The Company plans to continue investing in capital equipment to support engineering development efforts and operations.

Cash used in investing activities was $0.1 million for fiscal year 2020 and consisted of spending for production equipment and laboratory test equipment.

32

Table of Contents

Financing Activities

Cash used by financing activities was $19.8 million for fiscal year 2021 and consisted primarily of dividends paid. Cash used by financing activities was $0.7 million for fiscal year 2020 and consisted of tax withholding payments related to an employee’s cashless exercise of stock options of $0.9 million, partially offset by proceeds from exercise of stock options of $0.2 million.

Summary

Future capital requirements depend upon numerous factors, including market acceptance of the Company’s products, the timing and rate of expansion of business, acquisitions, joint ventures, and other factors. IS&S has experienced increases in expenditures since its inception and anticipates that expenditures will remain relatively constant with the levels experienced in fiscal 2021 and fiscal 2020. The Company believes that its cash and cash equivalents will provide sufficient capital to fund operations for at least the next twelve months. Further, IS&S may need to develop and introduce new or enhanced products, to respond to competitive pressures, to invest in or acquire businesses or technologies, or to respond to unanticipated requirements or developments. If insufficient funds are available, the Company may not be able to introduce new products or to compete effectively.

Inflation

IS&S does not believe inflation had a material effect on its financial position or results of operations during the past three years; however, it cannot predict future effects of inflation.

Critical Accounting Policies

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America (“GAAP”) requires management to make estimates and assumptions that affect reported amounts of assets and liabilities, disclosure of contingent assets and liabilities at the date of the financial statements and the reported amount of revenues and expenses during the reporting period. The Company’s most critical accounting policies are revenue recognition, income taxes and inventory valuation.

Revenue recognition

The Company enters into sales arrangements with customers that, in general, provide for the Company to design, develop, manufacture and deliver large flat-panel display systems, flight information computers, autothrottles and advanced monitoring systems that measure and display critical flight information, including data relative to aircraft separation, airspeed, altitude, and engine and fuel data measurements.

Revenue from Contracts with Customers

In May 2014, the FASB issued Accounting Standards Update (“ASU”) 2014-09, “Revenue from Contracts with Customers,” which provides a single, comprehensive revenue recognition model for all contracts with customers, and contains principles to determine the measurement of revenue and timing of when it is recognized. The model supersedes most previous revenue recognition guidance, and also requires enhanced revenue-related disclosures. Under the new standard and its related amendments (collectively known as “ASC 606”), revenue is recognized when a customer obtains control of promised goods or services. The amount of revenue recognized will reflect the consideration that the entity expects to receive in exchange for those goods or services. In addition, the standard requires disclosure of the nature, amount, timing, and uncertainty of revenue and cash flows arising from contracts with customers.

The Company adopted ASC 606 on October 1, 2018 using the modified retrospective method for all contracts not completed as of the date of adoption. The reported results for fiscal years ended September 30, 2021, September 30, 2020 and September 30, 2019 reflect the application of ASC 606 guidance while the reported results for the fiscal years ended September 30, 2018 and September 30, 2017 were prepared under the guidance of ASC 605, “Revenue Recognition” (“ASC 605”), which is also referred to herein as “legacy GAAP” or the “previous guidance.” The adoption of ASC 606 represents a change in accounting principles. In accordance with ASC 606, revenue is recognized when a customer obtains control of promised goods or services. The amount of revenue recognized reflects the consideration to which the Company expects to be entitled to receive in exchange for these goods or services. To achieve this core principle, the Company applies the following five steps:

33

Table of Contents

The Company’s contract with its customers typically is the form of a purchase order issued to the Company by its customers and, to a lesser degree, in the form of a purchase order issued in connection with a formal contract executed with a customer. For the purpose of accounting for revenue under ASC 606, a contract with a customer exists when (i) the Company enters into an enforceable contract with a customer that defines each party’s rights regarding the goods or services to be transferred and identifies the payment terms related to these goods or services, (ii) the contract has commercial substance and, (iii) the Company determines that collection of substantially all consideration for goods or services that are transferred is probable based on the customer’s intent and ability to pay the promised consideration. The Company applies judgment in determining the customer’s ability and intention to pay, which is based on a variety of factors including the customer’s historical payment experience or, in the case of a new customer, published credit and financial information pertaining to the customer.

Performance obligations promised in a contract are identified based on the goods or services that will be transferred to the customer that are both capable of being distinct, whereby the customer can benefit from the good or service either on its own or together with other resources that are readily available from third parties or from the Company, and are distinct in the context of the contract, whereby the transfer of the goods or services is separately identifiable from other promises in the contract. Most of our revenue is derived from purchases under which we provide a specific product or service and, as a result, there is only one performance obligation. In the event that a contract includes multiple promised goods or services, such as an EDC contract which includes both engineering services and a resulting product shipment, the Company must apply judgment to determine whether promised goods or services are capable of being distinct in the context of the contract. In these cases, the Company considers whether the customer could, on its own, or together with other resources that are readily available from third parties, produce the physical product using only the output resulting from the Company’s completion of engineering services. If the customer cannot produce the physical product, then the promised goods or services are accounted for as a combined performance obligation.

The transaction price is determined based on the consideration to which the Company will be entitled in exchange for transferring goods or services to the customer. To the extent the transaction price includes variable consideration, the Company estimates the amount of variable consideration that should be included in the transaction price utilizing either the expected value method or the most likely amount method depending on the nature of the variable consideration. Variable consideration is included in the transaction price if, in the Company’s judgment, it is probable that a significant future reversal of cumulative revenue under the contract will not occur.

If the contract contains a single performance obligation, the entire transaction price is allocated to the single performance obligation. The Company determines standalone selling price based on the price at which the performance obligation is sold separately. If the standalone selling price is not observable through past transactions, the Company estimates the standalone selling price by taking into account available information such as market conditions as well as the cost of the goods or services and the Company’s normal margins for similar performance obligations.

The Company satisfies performance obligations either over time or at a point in time as discussed in further detail below. Revenue is recognized at the time the related performance obligation is satisfied by transferring a promised good or service to a customer.

Revenue from products transferred to customers at a point in time accounted for 100 percent and 97 percent of our revenue for the fiscal years ended September 30, 2021 and 2020, respectively and is typically recognized at the time of shipment of products to the customer. The remaining revenue results from EDC contracts and is recognized over time using an input measure (e.g., costs incurred to date relative to total estimated costs at completion) to measure progress. Contract costs include material, components and third-party avionics purchased from suppliers, direct labor, and overhead costs.

34

Table of Contents

Contract Balances

Contract assets consist of the right to consideration in exchange for product offerings that we have transferred to a customer under the contract. Contract liabilities primarily relate to consideration received in advance of performance under the contract.

Customer Service Revenue

The Company enters into sales arrangements with customers for the repair or upgrade of its various products that are not under warranty. The Company’s customer service revenue and cost of sales are included in product sales and product cost of sales, respectively, on the accompanying consolidated statements of operations.

Income taxes

Income taxes are recorded in accordance with ASC Topic 740, “Income Taxes” (“ASC Topic 740”), which utilizes a balance sheet approach to provide for income taxes. Under this method, the Company recognizes deferred tax assets and liabilities for temporary differences between the financial reporting basis and the tax basis of the Company’s assets, liabilities, and expected benefits of utilizing NOLs and tax credit carry-forwards. The impact on deferred taxes of changes in tax rates and laws, if any, are applied to the years during which temporary differences are expected to be settled, and are reflected in the consolidated financial statements in the period of enactment. At the end of each interim reporting period, the Company prepares an estimate of the annual effective income tax rate and applies that annual effective income tax rate to ordinary year-to-date pre-tax income for the interim period. Specific tax items discrete to a particular quarter are recorded in income tax expense for that quarter. The estimated annual effective tax rate used in providing for income taxes on a year-to-date basis may change in subsequent periods.

Deferred tax assets are reduced by a valuation allowance if, based on the consideration of all available evidence, it is more likely than not that some portion of the deferred tax asset will not be realized. Significant weight is given to evidence that can be verified objectively, and significant management judgment is required in determining any valuation allowance recorded against net deferred tax assets. The Company evaluates deferred income taxes on a quarterly basis to determine if a valuation allowance is required by considering available evidence. Deferred tax assets are recognized when expected future taxable income is sufficient to allow the related tax benefits to reduce taxes that would otherwise be payable. The sources of taxable income that may be available to realize the benefit of deferred tax assets are future reversals of existing taxable temporary differences, future taxable income exclusive of reversing temporary differences and credit carryforwards, taxable income in carry-back years, and tax planning strategies which are both prudent and feasible. For the year ended September 30, 2021, the valuation allowance was released against all federal and state deferred tax assets with the exception of certain state net operating losses due to positive evidence that the assets are more likely than not to be realized in future years. The Company will continue to assess all available evidence during future periods to evaluate any changes to the realization of its deferred tax assets. If the Company were to determine that it would be able to realize additional state deferred tax assets in the future, it would make an adjustment to the valuation allowance which would reduce the provision for income taxes.

The accounting for uncertainty in income taxes requires a more likely than not threshold for financial statement recognition and measurement of tax positions taken or expected to be taken in a tax return. The Company records a liability for the difference between the (i) benefit recognized and measured for financial statement purposes and (ii) the tax position taken or expected to be taken on the Company’s tax return. To the extent that the Company’s assessment of such tax positions changes, the change in estimate is recorded in the period in which the determination is made. The Company has elected to record any interest or penalties associated with uncertain tax positions as income tax expense.

The Company files a consolidated U.S. federal income tax return. The Company prepares and files tax returns based on the interpretation of tax laws and regulations, and records estimates based on these judgments and interpretations. In the normal course of business, the tax returns are subject to examination by various taxing authorities. Such examinations may result in future tax and interest assessments by these taxing authorities, and the Company records a liability when it is probable that there will be an assessment. The Company adjusts the estimates periodically as a result of ongoing examinations by and settlements with the various taxing authorities, and changes in tax laws, regulations and precedent. The consolidated tax provision of any given year includes adjustments to prior years’ income tax accruals that are considered appropriate, and any related estimated interest. Management believes that it has made adequate accruals for income taxes. Differences between estimated and actual amounts determined upon ultimate resolution, individually or in the aggregate, are not expected to have a material effect on the Company’s consolidated financial position but could possibly be material to its consolidated results of operations or cash flow of any one period.

35

Table of Contents

In March 2020, in response to the COVID-19 pandemic, the Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”) was signed into law to provide emergency assistance to affected individuals, families, and businesses. The CARES Act provides numerous tax provisions and other stimulus measures, including temporary changes regarding the prior and future utilization of NOLs. The CARES Act amends the NOL provisions of the Tax Act, allowing for the carryback of losses arising in tax years beginning before December 31, 2017, to each of the two taxable years preceding the taxable year of loss. Approximately $1,500,000 of pre-tax NOL was carried back two years to fully offset taxable income. This carryback frees up previously utilized R&D credits, resulting in an estimated increase in R&D credit carryforward of $196,000. The carryback created approximately $16,000 of AMT tax, which was refunded. The cash impact of this carryback was $309,412. A receivable was setup for this amount as of March 31, 2020 and the cash has since been received.

In December 2020, the Consolidations Appropriations Act of 2020 (the “CAA”) was enacted as a supplement to the CARES Act legislation providing additional financial relief to taxpayers adversely impacted by restrictions put into place in response to the COVID-19 pandemic. In addition, the CCA provides funding for public health initiatives in response to the pandemic. This legislation did not have a material impact on the Company’s tax position.

In March 2021, the American Rescue Plan Act of 2021 (the “ARPA”), which includes certain business tax provisions, was signed into law. This legislation did not have a material impact on the Company’s tax position.

Inventory valuation

The Company values inventory at the lower of cost (first-in, first-out) or net realizable value. Inventories are written down for estimated obsolescence equal to the difference between inventory cost and estimated net realizable value based on a combination of historical usage and assumptions based on expected usage related to estimated future customer and market demands. The Company’s method of valuing inventory contains uncertainties because the calculation requires management to consider inventory aging, to make assumptions regarding expected usage, and to apply judgments on forecasted future demand, market conditions, and technological obsolescence. If actual future demand or market conditions are less favorable than those projected by management, additional inventory write-down may be required.

New Accounting Pronouncements

In June 2016, FASB issued ASU 2016-13, Financial Instruments – Credit Losses (Topic 326): Measurement of Credit Losses on Financial Instrument (“ASU 2016-13”). ASU 2016-13 replaces the incurred loss impairment methodology in current U.S. GAAP with a methodology that reflects expected credit losses and requires consideration of a broader range of reasonable and supportable information to inform credit loss estimates. ASU 2016-13 is effective for SEC small business filers for fiscal years beginning after December 15, 2022. Management is currently assessing the impact ASU 2016-13 will have on the Company.

In August 2018, the FASB issued ASU 2018-13, “Fair Value Measurement (Topic 820): Disclosure Framework – Changes to the Disclosure Requirements for Fair Value Measurement,” (“ASU 2018-13”) which modifies the disclosures on fair value measurements by removing the requirement to disclose the amount and reason for transfers between Level 1 and Level 2 of the fair value hierarchy and the policy for timing of such transfers. The ASU expands the disclosure requirements for Level 3 fair value measurements, primarily focused on changes in unrealized gains and losses included in other comprehensive income. We adopted this update effective October 1, 2020. The adoption of this standard did not have a material impact on our condensed consolidated financial statements.

In December 2019, the FASB issued ASU 2019-12, “Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes” (“ASU 2019-12”), which simplifies the accounting for income taxes, eliminates certain exceptions within Accounting Standards Codification Topic 740, “Income Taxes” (“ASC 740”), and clarifies certain aspects of ASC 740 to promote consistency among reporting entities. We adopted this update effective October 1, 2021. The adoption of this standard did not have a material impact on our condensed consolidated financial statements or related disclosures.

As new accounting pronouncements are issued, we will adopt those that are applicable.

36

Table of Contents

Business Segments

The Company operates in one business segment as a systems integrator that designs, develops, manufactures, sells, and services flight guidance and cockpit display systems for OEMs and retrofit applications. Customers include various OEMs, commercial air transport carriers and corporate/general aviation companies, DoD and its commercial contractors, aircraft operators, aircraft modification centers, government agencies, and foreign militaries. The Company currently derives the majority of its revenues from the sale of this equipment and related EDC services. Most of the Company’s sales, operating results and identifiable assets are generated in the United States. In fiscal years 2021, 2020 and 2019 net sales outside the United States amounted to $8.4 million, $9.4 million and $7.5 million, respectively.

Item 7A. Quantitative and qualitative disclosures about market risk.

The Company’s operations are exposed to market risks primarily as a result of changes in interest rates. The Company does not use derivative financial instruments for speculative or trading purposes. The Company’s exposure to market risk for changes in interest rates relates to its cash equivalents. The Company’s cash equivalents consist of funds invested in money market funds, which bear interest at a variable rate. The Company does not participate in interest rate hedging. A change in interest rates earned on the Company’s cash equivalents would impact interest income and cash flows but would not impact the fair market value of the underlying instruments. Assuming that the balances during fiscal 2021 were to remain constant and that the Company did not act to alter the existing interest rate sensitivity, a hypothetical 1% increase in variable interest rates would have affected interest income by approximately $88,000. This would result in a net impact on cash of approximately $88,000 for fiscal 2021.

Item 8. Financial statements and supplementary data.

The financial statements of Innovative Solutions and Support, Inc. listed in the index appearing under Item 8 herein are filed as part of this Report.

​

37

Table of Contents

​

Innovative Solutions and Support, Inc.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

​

​

​

​

38

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Shareholders

Innovative Solutions & Support, Inc.

Opinion on the financial statements

We have audited the accompanying consolidated balance sheets of Innovative Solutions & Support Inc. (a Pennsylvania corporation) and subsidiaries (the “Company”) as of September 30, 2021 and 2020, the related consolidated statements of operations, shareholders’ equity, and cash flows for each of the three years in the period ended September 30, 2021, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of September 30, 2021 and 2020, and the results of its operations and its cash flows for each of the three years in the period ended September 30, 2021, in conformity with accounting principles generally accepted in the United States of America.

Basis for opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

Critical Audit Matters

Critical audit matters are matters arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. We determined that there are no critical audit matters.

/s/ GRANT THORNTON LLP

We have served as the Company’s auditor since 2014.

Philadelphia, Pennsylvania

December 22, 2021

39

Table of Contents

INNOVATIVE SOLUTIONS AND SUPPORT, INC.

​

CONSOLIDATED BALANCE SHEETS

​

​

The accompanying notes are an integral part of these statements.

​

40

Table of Contents

INNOVATIVE SOLUTIONS AND SUPPORT, INC.

​

CONSOLIDATED STATEMENTS OF OPERATIONS

​

​

The accompanying notes are an integral part of these statements.

​

​

41

Table of Contents

INNOVATIVE SOLUTIONS AND SUPPORT, INC.

​

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

​