INTERLINK ELECTRONICS INC - Annual Report: 2015 (Form 10-K)

 

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

Washington, D.C.  20549

 

 

FORM 10-K

 

(Mark One)

☒ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the fiscal year ended December 31, 2015

 

OR

 

☐TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from                 to                      .

 

Commission file number 000-21858

 

 

INTERLINK ELECTRONICS, INC.

(Exact Name of Registrant as Specified in Its charter)

 

 

31248 Oak Crest Drive, Suite 110, Westlake Village, California 91361

(Address of Principal Executive Offices) (Zip Code)

 

(805) 484-8855
(Registrant’s Telephone Number, Including Area Code)

 

 

Securities registered pursuant to Section 12(b) of the Act: None

 

 

Securities registered pursuant to Section 12(g) of the Act:  Common Stock, $0.001 par value

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐  No ☒

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ☐  No ☒

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☐  No ☒

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ☒  No ☐

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ☒

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.  See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act (Check one):

 

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐  No ☒

 

As of June 30, 2015, the aggregate market value of the voting and non-voting common equity held by non-affiliates was $7,233,736, based on the closing price on that date. As of March 22, 2016, the registrant had 5,861,018 shares of common stock issued and outstanding.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Portions of the registrant’s Proxy Statement for the registrant’s 2016 Annual Meeting of Stockholders are incorporated by reference in Part III of this Annual Report on Form 10-K. Such Proxy Statement will be filed with the Securities and Exchange Commission within 120 days of December 31, 2015, the last day of the fiscal year covered by this Annual Report on Form 10-K.

 

 

INTERLINK ELECTRONICS, INC.

FORM 10-K

TABLE OF CONTENTS

 

 

 

 

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

 

This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, or the Exchange Act. The words “believe,” “may,” “will,” “potentially,” “estimate,” “continue,” “anticipate,” “intend,” “could,” “would,” “project,” “plan,” “expect” and similar expressions that convey uncertainty of future events or outcomes are intended to identify forward-looking statements. These forward-looking statements include, but are not limited to, statements concerning the following:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

These forward-looking statements speak only as of the date of this Form 10-K and are subject to uncertainties, assumptions and business and economic risks. As such, our actual results could differ materially from those set forth in the forward-looking statements as a result of the factors set forth below in Part I, Item 1A, “Risk Factors,” and in our other reports filed with the Securities and Exchange Commission.  Moreover, we operate in a very competitive and rapidly changing environment, and new risks emerge from time to time.  It is not possible for us to predict all risks, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements we may make. In light of

these risks, uncertainties and assumptions, the forward-looking events and circumstances discussed in this Form 10-K may not occur, and actual results could differ materially and adversely from those anticipated or implied in our forward-looking statements.

 

You should not rely upon forward-looking statements as predictions of future events.  Although we believe that the expectations reflected in our forward-looking statements are reasonable, we cannot guarantee that the future results, levels of activity, performance or events and circumstances described in the forward-looking statements will be achieved or occur.  Moreover, neither we nor any other person assumes responsibility for the accuracy and completeness of the forward-looking statements.  We undertake no obligation to update publicly any forward-looking statements for any reason after the date of this Form 10-K, to conform these statements to actual results or to changes in our expectations, except as required by law.

 

You should read this Annual Report on Form 10-K and the documents that we reference in this Annual Report on Form 10-K and have filed with the Securities and Exchange Commission as exhibits thereto with the understanding that our actual future results and circumstances may be materially different from what we expect.

PART I

 

ITEM 1.BUSINESS

 

Our Company

 

Interlink Electronics, Inc. (“Interlink”, the “Company”, “we”, “us”, “our”) designs, develops, manufactures and sells a range of force-sensing technologies that incorporate our proprietary materials technology, firmware and software into a portfolio of standard products and custom solutions.  These include sensor components, subassemblies, modules and products that support effective, efficient cursor control and novel 3 dimensional user inputs.  Our disruptive, leading edge human machine interface, or HMI, technology platforms are deployed in a wide range of markets including consumer electronics, automotive, industrial, and medical. Our solutions have focused on handheld user input, menu navigation, cursor control, and other intuitive interface technologies for the world’s top electronics manufacturers.

 

We invented force sensing resistor, or FSR, technology and pioneered commercialization of printed electronics manufacturing, paving the way for industry-wide adoption of force sensing technology. Our extensive knowledge and experience with this technology, along with the firmware we incorporate in our HMI solutions, differentiates us from other providers of HMI solutions. We, along with our customers, incorporate our FSR and force sensing sensors and modules into end user products. Our sensors and modules are used in electronics devices and systems where user input must be converted into electronics and software data. Our force sensing technology solution platforms enabled industry first implementations in gaming, smartphone, rugged notebook, automotive cockpit and automotive entry applications. Insatiable consumer and end user demand for enhanced user experience is driving the need for innovative multi-modal HMI technologies and applications. Force sensing input provides a critical novel modality that drives a paradigm shift in HMI.

 

Market requirements for innovative solutions that enable smaller, thinner devices, lower power consumption, highly refined designs, better navigation and more intuitive usability in all environments, are also driving increased demand for our products.  Consumers expect to use multi-modal HMI in the home, industrial and medical environments, automotive spaces (both inside and outside the vehicle), and in all technology interactions where they formerly used switches and knobs.  Interlink delivers cutting edge solutions for all of these environments.

 

Significant market opportunities are rapidly emerging for us to improve upon the functionality of standard capacitive sensors which are widely available and competitively priced. Inadvertent activation, where users unintentionally activate a control, is a common problem with capacitive technology. In contrast, force sensing solutions require a deliberate application of force to operate. We have had recent success in using our force sensing solutions in combination with capacitive technologies to minimize the latter’s performance issues, enabling force sensing solutions to complement competitive technologies and provide us with new opportunities for growth.  We continue to simultaneously expand our standard product portfolio and develop new technology platforms to grow existing markets and capture emerging markets.

 

We serve a global customer base from our corporate headquarters in Westlake Village, California, our research and development center in Singapore, our manufacturing facility in Shenzhen, China and our regional offices in Hong Kong and Tokyo. We sell our products in a wide range of markets, including consumer electronics, automotive, industrial, and medical, and to some of the world’s largest companies and most recognizable brands.

 

Our competitive strengths include:

 

 

 

 

We were incorporated in California on February 27, 1985.  We reincorporated in Delaware on July 10, 1996 and again reincorporated in Nevada on July 20, 2012.  On May 29, 2014, we effected a four-for-one forward split of our common stock, and on February 24, 2015, we effected a two-for-one forward split of our common stock.  The information in this Form 10-K gives effect to each of these forward splits of our common stock.

 

Our principal executive office is located at 31248 Oak Crest Drive, Westlake Village, California 91361 and our telephone number is (805) 484-8855. Our website address is www.interlinkelectronics.com. None of the information on our website is part of this Form 10-K.

 

Our Industry

 

HMI technologies have been available since the early 1970’s, but were used almost exclusively in industrial products during the first 20 years of their existence.  The introduction of touchpad mouse devices for laptop computers in the early 1990’s represented the first significant transition of HMI technologies into the consumer electronics market.  Personal devices utilizing touch sensitive technology became ubiquitous in our daily human-machine interactions with the introduction in 2007 of smart phone technology incorporating capacitive screens.  As the smart phone became an integral part of consumers’ daily lives throughout the world, it influenced consumers’ expectations of how we should interact with all types of devices. Whether those devices are personal electronics, industrial and medical equipment, or our automobiles, purchasers of equipment expect sleek, highly-functioning design including touch-sensing technology.  Consumers no longer want to push buttons or flip switches; rather, they expect smooth touch pads and gesture-driven input.  Engineers are responding to this demand by incorporating touch sensitive technology into a wide range of products, and any device that can utilize force and position sensing inputs to control or enhance its functionality is a candidate for use of the technology.

 

The products and solutions that we design, develop and manufacture for HMI applications are primarily printed electronic products.  Printed electronics is a set of printing methods used to create electrical devices on various substrates.  For over 30 years we have honed and developed the processes necessary to manufacture high quality printed electronic products for HMI applications.   According to industry analyst group IDTechEx, the market for printed and potentially printed products is expected to grow from more than $29.8 billion in 2013 to nearly $74 billion in 2025.

 

Our Strategy

 

Our primary objective is to be the global leader in providing force-sensing HMI solutions for the automotive, consumer electronics, medical and industrial automation markets. We also intend to utilize our role as a disruptive technology provider to bring our HMI solutions to new markets. To achieve our strategy, we intend to:

 

 

 

 

 

Our product development teams are skilled in concept definition, rapid prototyping, hardware and firmware development and integration support. Interlink benefits from its own world-class manufacturing facility in Shenzhen, China, allowing us to react quickly to customer needs, while ensuring the highest quality standards. We also maintain a sales force that can address new and existing customer opportunities worldwide.

 

Our Technology Platforms and Products

 

Interlink was founded on the invention and commercialization of the Force Sensing Resistor -- the industry’s first force sensing solution using printed electronics manufacturing.  As we transition from an FSR sensor supplier to an HMI solutions provider, we pursue and embrace leading edge force sensing technology platforms. Our chief technology officer and global research and development center, both located in Singapore, along with our US-based research and development team, are focused on strategic technology roadmaps, research and development of scalable technology platform architectures and synergistic technology partnerships. In an ever changing and competitive landscape, Interlink is committed to staying ahead of the technology curve.

 

The two primary types of user-input technologies common in today’s devices are capacitive and resistive. Capacitive sensors are used in the touch screens found in all smart phones and similar devices used globally by millions of consumers.  The most significant drawback to the capacitive technology is its inability to measure force, although there has been some progress recently in enhancing the technology with pseudo force sensing.  Capacitive sensors have become a high-volume, low-margin commodity product.

 

Our patented FSR technology consists of a bottom layer of conductor traces, a proprietary resistive ink top layer and a spacer that separates the two layers. An additional top layer that contains graphics and protects the sensor can also be added.  FSR sensors can be as thin as eight thousandths of an inch, making them particularly well suited for use where space is a critical issue, as in portable electronics. Our force sensing technology enables the sensor to be used for continuously variable control functions. For example, in a pointing device, increased pressure can be used to produce faster cursor movement.  Unlike capacitive devices, an FSR sensor’s performance is not impeded by the presence of moisture, dirt or dust, making the sensor suitable for use outdoors and in moist and other “hostile” environments.  Our FSR sensors have no moving parts, can be packaged in a sealed environment, and consume substantially lower power and are less susceptible to false readings or unintended touches than capacitive sensors.  We have developed sophisticated firmware that allows our FSR technology to become a complete solution delivering effective HMI functionality to our customers.

 

Custom Solutions

 

Interlink offers a comprehensive portfolio of standard solutions, from simple force sensors to multi-finger capable rugged trackpads. The largest part of our business, however, is the development and manufacture of custom solutions for our major customers. We offer full turnkey capability spanning initial concept to large volume manufacturing.  Custom solutions can be a single or multi-technology platform to meet customer requirements, and include both input and output technologies. We also offer full firmware development and integration support.

 

Standard Solutions

 

Our portfolio of standard solutions include:

 

 

 

 

Intellectual Property

 

We believe that intellectual property protection is crucial to our business.  We rely on a combination of patents, copyrights, trade secrets, trademarks, nondisclosure agreements with employees and third parties, licensing and other contractual agreements with third parties to protect our intellectual property.  We maintain and support an active program to protect our intellectual property primarily through the filing of patent applications and the defense of issued patents against infringement.

 

Our failure to obtain or maintain adequate protection for our intellectual property rights for any reason could hurt our competitive position.  There is no guarantee that patents will be issued from the patent applications that we have filed or may file.  Our issued patents may be challenged, invalidated or circumvented, and claims of our patents may not be of sufficient scope or strength, or issued in the proper geographic regions, to provide meaningful protection or any commercial advantage.  See “Risk Factors” under Item 1A of this Form 10-K for further discussion of the risks associated with patents and intellectual property.

 

Our FSR sensors are manufactured using proprietary screen-printing techniques. All proprietary aspects of the manufacturing process are currently conducted in-house at our US and China manufacturing facilities to maintain quality and protect our force sensing technology from infringement. While screen-printing is a common process in various industries, the quality and precision of printing, as well as the specific processes required to make high-quality FSR sensors, require considerable expertise. We believe this expertise is difficult to replicate over the short term and, to our knowledge, no unrelated party has done so. As a result, we consider this expertise to be one of our more important trade secrets. We require our employees to sign nondisclosure agreements and seek to limit access to sensitive information to the greatest practical extent.

 

As of December 31, 2015, we held 15 United States patents, and had two patents pending in the United States and three foreign pending patent applications. We group our patents into three general categories: sensors, which includes four patents expiring between 2022 and 2027; sensing systems, which includes two patents expiring in 2026 and 2031; and human interface devices, which includes nine patents expiring between 2017 and 2026. Our intellectual property strategy involves filing additional patent applications in our strategic focus markets on a regular basis. We do not expect that the upcoming expiration of a portion of our patents will have a material adverse impact on our business.

Competition

 

The markets for our products are highly competitive and subject to rapid advancement in design technology. We must identify and capture future market opportunities by developing and deploying value-added products.

 

We compete for market share based on our customers’ selection of our components over our competitors during the design phase of their products. Our ability to compete is dependent on the needs of our customers, how well our products address those needs, our corporate relationships, and a variety of other factors.

 

We offer a disruptive technology that is replacing outdated and undesirable approaches including switch technology.  We must convince companies to abandon older, proven but less elegant technologies and adopt our solutions. This change is supported by significant end-user demand for touch-sensitive solutions.  We also compete against the highly commoditized capacitive resistor technology.  However, our solutions are focused on providing functionality in situations where capacitive is unreliable or entirely unavailable.

 

The markets for our products are characterized by significant price competition and we anticipate that our products will continue to face substantial pricing pressure.

 

Sales and Marketing

 

We sell our HMI solutions and force sensing devices through our direct sales employees as well as outside sales representatives and distributors.  We work directly with Fortune 500 customers, technology design houses and original equipment manufacturers, or OEMs.  Our sales personnel have extensive engineering backgrounds and receive substantial support from our internal engineering resources.  Sales frequently result from interactions between senior management, design engineers, procurement departments, and our sales personnel. We interact with our customers throughout the product development and order process.  We maintain sales offices at our Corporate Headquarters in the United States, and in Hong Kong and Japan.

 

Due to the technical nature of our products, the length of our sales cycle can vary from a few months to several years and requires continued participation from our sales, engineering and management teams.  Our sales cycle for our custom solutions generally includes the following two phases.

 

Design Opportunity to Design Win

 

Our sales and engineering team engages with the customer to establish the nature of the design and explore various technical applications that may fit the customer’s need.

 

 

 

 

Mass Production

 

Once the customer has chosen our solution, they may move their product into the production phase.  It may take several months or more to go from design win to production. Product lifespan varies dramatically depending on the market place

and product.  Consumer electronics may have a lifespan of six months to five years; industrial and automotive applications may continue for three to ten years, and medical product lifespans may continue past 20 years.

 

Our Customers

 

As of December 31, 2015, we had almost 200 active customers, including many of the world’s leading electronics companies.  Our customers are diverse and include Fortune 500 companies as well as start-ups, design houses, original design manufacturers, OEMs and universities.  We supply some of the world’s largest consumer electronics manufacturers, luxury and mid-market car companies, familiar names in the medical and industrial equipment markets, research engineers and designers entering the Internet-Of-Things market, and companies of all different sizes in other markets.

 

Our customer base is widely dispersed geographically. Sales to customers located outside the United States have historically accounted for a significant percentage of our revenues, a trend we expect to continue.  On a bill-to basis, international sales constituted 43% and 40% of our net revenues for the years ended December 31, 2015 and 2014, respectively. 

 

Future sales of our products will be based on, among other elements, expansion into adjacent markets, continued expansion of our product line, the acceptance of our product line, expansion into additional domestic and international markets, and our ability to maintain a competitive position against other technology providers.

 

For the year ended December 31, 2015, we had four customers that represented 22%, 16%, 13% and 10% of net revenues, respectively. For the year ended December 31, 2014, we had three customers that represented 17%, 10% and 19% of net revenues, respectively.

 

Manufacturing Operations

 

We have our own modern manufacturing facility in Shenzhen, China, that is ISO 9001 compliant. We also maintain a small manufacturing facility in Simi Valley, California.  We purchase our materials from outside suppliers. We carefully select suppliers based on their ability to provide quality parts and components that meet technical specifications. We actively monitor these suppliers, but we are subject to substantial risks associated with the performance of our suppliers.  We source certain of our components from a single supplier, which increases the risk of shortages and shipment delays and decreases our ability to negotiate with that supplier.

 

Engineering, Research and Development

 

Rapid advancements in process technologies and increasing levels of functional integration characterize the market for our products. We believe that our future success will depend largely on our ability to continue improving our products and our process technologies, and to develop new technologies.

 

Our chief technology officer and global research and development center are located in Singapore, where we focus on product innovation.  We intend to grow this facility substantially over the next five years, including expanding our research and development team by approximately 20% per year, expanding the size of the facility, and investing in additional tools and equipment.  We also operate research and development centers in the United States and China, primarily focused on customer support and product integration.

 

Our Employees

 

As of December 31, 2015, we had 112 employees worldwide.  Our employees, listed in population size order from largest to smallest, are in the following departments: operations, research and development, sales, and administration.  Our ability to attract and retain qualified personnel is essential to our continued success.  None of our employees are

represented by a collective bargaining agreement, and we have never experienced a work stoppage.  We believe our employee relations are good.

 

ITEM 1A.RISK FACTORS

 

Investing in our common stock involves a high degree of risk. You should carefully consider the risks and uncertainties described below, together with all of the other information in this Form 10-K, including our consolidated financial statements and related notes, before investing in our common stock. If any of the following risks materialize, our business, financial condition, results of operations and prospects could be materially and adversely affected. In that event, the price of our common stock could decline, and you could lose part or all of your investment.

 

Risks Related to Our Business and Our Industry

 

If we are unable to keep pace with rapid technological change and gain market acceptance of new products, we may not be able to compete effectively.

 

Technology, both in our markets and in our customers’ markets, is undergoing rapid change. In order to maintain our leadership position in our existing markets and to emerge as a leader in new markets, we will have to maintain a leadership position in the technologies supporting those markets. Doing so will require, among other things, that we accomplish the following:

 

 

 

 

 

We cannot assure you that we will be able to achieve any of these objectives.

 

If we fail to manage change successfully, our operations could be adversely impacted and our business could be impaired.

 

The ability to operate our business in rapidly evolving markets requires an effective planning and management process. We expect that responding to changes in our business will place a significant strain on our personnel, management systems, infrastructure and other resources. Our ability to manage change effectively will require us to attract, train, motivate and manage new employees, to reallocate human and other resources to support new undertakings and to restructure our operations to manage a restructured business effectively. If we are unable to respond effectively to change, our operations could be adversely affected and our business could be impaired.

 

We rely on third parties for the materials that we use to manufacture our products and a shortage of supply could adversely affect our revenues, operating results and customer relationships.

 

We rely on third-party suppliers for the raw material components of our products. We cannot assure you that our suppliers will be able to maintain an adequate supply of these raw materials to enable us to fulfill all of our customers’ orders on a timely basis. A failure to obtain an adequate supply of the materials for our products could increase our costs of goods sold, cause us to fail to meet delivery commitments and cause our customers to purchase from our competitors, which could adversely affect our operating results and customer relationships. In some situations, we rely on a single

supplier for raw material components of our products. Any disruption in these supplier relationships could prevent us from maintaining an adequate supply of materials and could adversely affect our results of operation and financial position.

 

Disruptions in our manufacturing facilities or arrangements could cause our revenues and operating results to decline.

 

We currently manufacture the majority of our products in Shenzhen, China. This facility is vulnerable to damage from earthquakes, floods, fires, power loss and similar events. It could also be subject to break-ins, sabotage and intentional acts of vandalism. Our insurance may not cover such events and, if the event is covered, our insurance may not be sufficient to compensate us for any losses that may occur. Despite any precautions we may take, the occurrence of a natural disaster or other unanticipated problems at our manufacturing facility could result in delayed shipment of products, missed delivery deadlines and harm to our reputation, which may cause our revenues and operating results to decline. Performance, reliability or quality problems with our products may cause our customers to reduce or cancel orders which would harm our operating results.

 

We regularly introduce new products with new technologies or manufacturing processes. Our products have in the past contained, and may in the future contain, errors or defects that may be detected at any point in the life of the product. Detection of such errors could result in delays in shipping and sales during the period required to correct such errors. Defects may also result in product returns, loss of sales and cancelled orders, delays in market acceptance, injury to our reputation, injury to customer relationships and increased warranty costs, which could have an adverse effect on our business, operating results and financial condition.

 

International sales and manufacturing risks could adversely affect our operating results.

 

Our revenue from international sales accounted for approximately 43% and 40% of net revenue for the years ended December 31, 2015 and 2014, respectively. We believe that international sales will represent a substantial portion of our sales for the foreseeable future. The majority of our manufacturing is currently performed in China. Our international operations involve a number of risks, including with respect to:

 

 

 

 

 

 

 

 

 

 

Any of the above factors could adversely affect our operating results.

 

Our markets are intensely competitive and many of our potential competitors have resources that we lack.

 

Our markets are competitive and we expect competition in our newer markets to increase. Our competitors include companies with similar products or technologies, companies that sell complementary products to our target markets and our customers themselves, who could choose to manufacture products that they currently buy from us. Our competitors and potential competitors may have established business relationships that afford them a competitive advantage or may create technologies that are superior to ours or that set a new industry standard that will define the successful product for that market. If any of our competitors establish a close working relationship with our customers, they may obtain advance knowledge of our customers’ technology choices or may be afforded an opportunity to work in partnership to develop compatible technologies and may therefore achieve a competitive advantage. We may be unable to compete successfully against our current and future competitors.

 

We cannot guarantee that our HMI solutions for new markets will be successful or that we will be able to continue to generate significant revenue from these markets.

 

Our HMI solutions may not be successful in new markets despite the fact that these product solutions are capable of enabling people to interact more easily and intuitively with a wide variety of electronic devices.  Various target markets for our interface solutions may develop slower than anticipated or could utilize competing technologies. The markets for certain of these products depend in part upon the continued development and deployment of wireless and other technologies, which may or may not address the needs of the users of these products.

 

Our ability to generate significant revenue from new markets will depend on various factors, including the following: the development and growth of these markets; the ability of our technologies and product solutions to address the needs of these markets; the price and performance requirements of our customers and the preferences of end users; and our ability to provide our customers with HMI solutions that provide advantages in terms of size, power consumption, reliability, durability, performance, and value-added features compared with alternative solutions.

 

The failure of any of these target markets to develop as we expect, or our failure to serve these markets to a significant extent, will impede our sales growth and could result in substantially reduced earnings. We cannot predict the size or growth rate of these markets or the market share we will achieve or maintain in these markets in the future.

 

If we fail to maintain and build relationships with our customers, or if our customers’ products which utilize our human-machine interface solutions do not gain widespread market acceptance, our revenue may stagnate or decline.

 

We do not sell products to end users and we do not control or influence the manufacture, promotion, distribution, or pricing of the products that incorporate our HMI solutions. Instead, we sell component products that our customers incorporate into their products, and we depend on our customers to successfully manufacture and distribute products incorporating our component products and to generate consumer demand through marketing and promotional activities. As a result of this, our success depends almost entirely upon the widespread market acceptance of our customers’ products that incorporate our HMI solutions. Even if our technologies successfully meet our customers’ price and performance goals, our sales would decline or fail to develop if our customers do not achieve commercial success in selling their products that incorporate our HMI solutions.

 

Our customers generally do not provide us with firm, long-term volume purchase commitments, opting instead, to issue purchase orders that they can cancel, reduce, or delay at any time. In order to meet the expectations of our customers, we must provide innovative HMI solutions on a timely and cost-effective basis. This requires us to match our design and production capacity with customer demand, maintain satisfactory delivery schedules, and meet performance goals. If we are unable to achieve these goals for any reason, our sales may decline or fail to develop, which would result in decreasing revenue.

 

We cannot provide any assurance that current environmental laws and product quality specification standards, or any laws or standards enacted in the future, will not have a material adverse effect on our business.

 

Our operations are subject to environmental and various other regulations in each of the jurisdictions in which we conduct business. Regulations have been enacted in certain jurisdictions which impose restrictions on waste disposal of electronic products and electronics recycling obligations. If we fail to comply with applicable rules and regulations in connection with the use and disposal of such substances or other environmental or recycling legislation, we could be subject to significant liability or loss of future sales.

 

If we are not able to protect our intellectual property or if we infringe on the intellectual property of others, our business and operating results could be adversely affected.

 

We consider our intellectual property to be a key element of our ability to compete in our chosen markets. We rely on a combination of patents, trade secrets and proprietary software to establish and protect our intellectual property rights. There is no assurance that patents will be issued from any of our pending applications or that any claims allowed from existing or pending patents will be sufficiently broad to protect our technology. We also cannot assure that any patents issued to us will not be challenged, invalidated or circumvented, or that the rights granted will provide proprietary protection. Litigation may be necessary to enforce our patents, trade secrets and other intellectual property rights, to determine the validity and scope of the proprietary rights of others or to defend against claims of infringement. Such litigation could result in substantial costs and diversion of resources and could have a material adverse effect on our business, regardless of the final outcome of the litigation.

 

We are not currently engaged in any patent infringement suits. Despite our efforts to maintain and safeguard our proprietary rights, we cannot assure you that we will be successful in doing so or that our competitors will not independently develop or patent technologies that are substantially equivalent or superior to our technologies. If any of the holders of these patents assert claims that we are infringing them, we could be forced to incur substantial litigation expenses, and if we were found to be infringing on someone else’s patent, we could be required to pay substantial damages, pay royalties in the future or be enjoined from infringing in the future.

 

We face risks associated with security breaches or cyber attacks.

 

We face risks associated with security breaches or cyber attacks of our computer systems or those of our third-party representatives, vendors, and service providers. Although we have implemented security procedures and controls to address these threats, our systems may still be vulnerable to data theft, computer viruses, programming errors, attacks by third parties, or similar disruptive problems. If our systems, or systems owned by third parties affiliated with our company, were breached or attacked, the proprietary and confidential information of our company and our customers could be disclosed and we may be required to incur substantial costs and liabilities, including the following: expenses to rectify the consequences of the security breach or cyber attack; liability for stolen assets or information; costs of repairing damage to our systems; lost revenue and income resulting from any system downtime caused by such breach or attack; loss of competitive advantage if our proprietary information is obtained by competitors as a result of such breach or attack; increased costs of cyber security protection; costs of incentives we may be required to offer to our customers or business partners to retain their business; and damage to our reputation. In addition, any compromise of security from a security breach or cyber attack could deter customers or business partners from entering into transactions that involve providing confidential information to us. As a result, any compromise to the security of our systems could have a material adverse effect on our business, reputation, financial condition, and operating results.

 

Our ability to operate effectively could be impaired if we were to lose the services of key personnel, or if we are unable to recruit qualified managers and key personnel in the future.

 

Our success is substantially dependent on the continued availability of our key management and technical personnel. Several of our key management personnel have been with us throughout most of our history and have substantial experience with our business and technology. If one or more of our key management personnel leaves Interlink and we

are unable to find a replacement with the combination of skills and attributes necessary to execute our business plan, it may have an adverse impact on our business. Our success will also depend, in part, on our ability to attract and retain additional qualified professional, technical, production, managerial and marketing personnel, both domestically and internationally.

 

Risks Relating to the Securities Markets and Ownership of Our Common Stock

 

We have applied to list our common stock on the NASDAQ Capital Market. If our listing is approved, and we subsequently fail to comply with the continuing listing standards of The NASDAQ Capital Market, our securities could be delisted.

 

We expect that our common stock will be eligible to be quoted on the NASDAQ Capital Market.  For our common stock to be listed on the NASDAQ Capital Market, we must meet the current NASDAQ Capital Market listing requirements. If we are unable to meet these requirements in the future, our common stock could be delisted from the NASDAQ Capital Market. If our common stock were to be delisted from the NASDAQ Capital Market, our common stock could continue to trade “over-the-counter” following such delisting. Any such delisting of our common stock could have an adverse effect on the market price of, and the efficiency of the trading market for, our common stock, not only in terms of the number of shares that can be bought and sold at a given price, but also through delays in the timing of transactions and the reduction in our coverage by securities analysts, if any. Also, if in the future we were to determine that we need to seek additional equity capital, delisting could have an adverse effect on our ability to raise capital in the public or private equity markets.

 

Our CEO has control over key decision making as a result of his control of a majority of our voting stock.

 

Steven N. Bronson, our Chairman, President and CEO, beneficially owns approximately 71% of the outstanding shares of our common stock as of December 31, 2015. As a result, Mr. Bronson has the ability to control the outcome of matters submitted to our stockholders for approval, including the election of directors and any merger, consolidation, or sale of all or substantially all of our assets. In addition, Mr. Bronson has the ability to control the management and affairs of our company as a result of his position as our CEO and his ability to control the election of our directors. As a board member and officer, Mr. Bronson owes a fiduciary duty to our stockholders and must act in good faith in a manner he reasonably believes to be in the best interests of our stockholders. As a stockholder, Mr. Bronson may have interests that differ from other stockholders and he may vote in a manner that is adverse to their interests.  This concentration of ownership may have the effect of deterring, delaying or preventing a change of control of our company, could deprive our stockholders of an opportunity to receive a premium for their common stock as part of a sale of our company and might ultimately affect the market price of our common stock.

 

 

Our success depends in part on our CEO, who simultaneously leads other public corporations.

Steven N. Bronson, our Chairman of the Board, Chief Executive Officer and President, simultaneously serves as the President and Chief Executive Officer of Qualstar Corporation (NASDAQ: QBAK) and Chief Executive Officer and Chairman of BKF Capital Group, Inc. (OTCMKTS: BKFG). As a result, he divides his time among these companies and does not devote his full business time and attention to Interlink’s business. Mr. Bronson currently works on average approximately 30 to 40 hours per week for Interlink. There can be no assurance, however, that the amount of time Mr. Bronson devotes to our company will not diminish from time to time for limited or extended periods as his other business obligations require a greater portion of his attention. Mr. Bronson is not required to spend a minimum amount of time on Interlink business. Our continued success depends in part upon the availability and performance of Mr. Bronson, who possesses unique and extensive industry knowledge and experience as well as a deep understanding of our business and strategy. A reduction in Mr. Bronson’s services to Interlink from their current levels due to his obligations to Qualstar, BKF Capital or other organizations with which he is affiliated could have a disruptive effect, adversely impacting our ability to manage our business effectively and execute our business strategy.

The price of our common stock may be volatile and the value of your investment could decline.

 

Technology stocks have historically experienced high levels of volatility.  The trading price of our common stock may fluctuate substantially, depending on many factors, some of which are beyond our control and may not be related to our operating performance.  These fluctuations could cause investors to lose all or part of their investment in our common stock.  Factors that could cause fluctuations in the trading price of our common stock include the following:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

In addition, if the market for technology stocks or the stock market, in general, experience a loss of investor confidence, the trading price of our common stock could decline for reasons unrelated to our business, results of operations or financial condition.  The trading price of our common stock might also decline in reaction to events that affect other companies in our industry even if these events do not directly affect us.  In the past, following periods of volatility in the market price of a company’s securities, securities class action litigation has often been brought against that company.  If our stock price is volatile, we may become the target of securities litigation.  Securities litigation could result in substantial costs and divert our management’s attention and resources from our business.  This could have a material adverse effect on our business, results of operations and financial condition.

 

Raising additional capital may cause dilution to our existing stockholders, restrict our operations or require us to relinquish rights to our product candidates on unfavorable terms to us.

 

We may seek additional capital through a variety of means, including through private and public equity offerings and debt financings. To the extent that we raise additional capital through the sale of equity or convertible debt securities, ownership interest will be diluted, and the terms may include liquidation or other preferences that adversely affect

stockholder rights. Debt financing, if available, may involve agreements that include covenants limiting or restricting our ability to take certain actions, such as incurring additional debt, making capital expenditures or declaring dividends. If we raise additional funds from third parties, we may have to relinquish valuable rights to our technologies or product candidates, or grant licenses on terms that are not favorable to us. If we are unable to raise additional funds through equity or debt financing when needed, we may be required to delay, limit, reduce or terminate our product development or commercialization efforts for our product candidates, or we may need to grant to others the rights to develop and market product candidates that we would otherwise prefer to develop and market ourselves.

 

The requirements of being a public company may strain our resources, divert our management’s attention and affect our ability to attract and retain qualified board members.

 

As a public company, we will be subject to the reporting requirements of the Exchange Act, and will be required to comply with the applicable requirements of the Sarbanes-Oxley Act and the Dodd-Frank Wall Street Reform and Consumer Protection Act, the listing requirements of the securities exchange on which our common stock is traded and other applicable securities rules and regulations.  Compliance with these rules and regulations will increase our legal and financial compliance costs, make some activities more difficult, time-consuming or costly and increase demand on our systems and resources.  Among other things, the Exchange Act requires that we file annual, quarterly and current reports with respect to our business and results of operations and maintain effective disclosure controls and procedures and internal controls over financial reporting.  In order to maintain and, if required, improve our disclosure controls and procedures and internal controls over financial reporting to meet this standard, significant resources and management oversight may be required.  As a result, management’s attention may be diverted from other business concerns, which could harm our business and results of operations.  We may need to hire additional employees to comply with these requirements, which will increase our costs and expenses.

 

In addition, we also expect that being a public company and these new rules and regulations will make it more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced coverage or incur substantially higher costs to obtain coverage.  These factors could also make it more difficult for us to attract and retain qualified members of our board of directors, particularly to serve on our audit committee and compensation committee, and qualified executive officers.

 

We will be required to evaluate our internal control over financial reporting under Section 404 of the Sarbanes-Oxley Act of 2002, and any adverse results from such evaluation could result in a loss of investor confidence in our financial reports and have an adverse effect on our stock price.

 

Pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, we will be required to furnish a report by our management on our internal control over financial reporting when we file our December 31, 2016 annual report with the SEC.  Such report will contain, among other matters, an assessment of the effectiveness of our internal control over financial reporting as of the end of our fiscal year, including a statement as to whether or not our internal control over financial reporting is effective.  This assessment must include disclosure of any material weaknesses in our internal control over financial reporting identified by management.  If we are unable to assert that our internal control over financial reporting is effective, we could lose investor confidence in the accuracy and completeness of our financial reports, which could have an adverse effect on our stock price.

 

Our independent registered public accounting firm is not required to formally attest to the effectiveness of our internal control over financial reporting until the later of the year following our first annual report required to be filed with the SEC, or the date we are no longer an “emerging growth company”.  At such time, our independent registered public accounting firm may issue a report that is adverse in the event it is not satisfied with the level at which our controls are documented, designed or operating.  Our remediation efforts may not enable us to avoid a material weakness in the future.

 

If securities or industry analysts do not publish research or reports about our business, or publish inaccurate or unfavorable research reports about our business, our share price and trading volume could decline.

 

The trading market for our common stock will, to some extent, depend on the research and reports that securities or industry analysts publish about us or our business.  We do not have any control over these analysts.  If one or more of the analysts who cover us should downgrade our shares or change their opinion of our business prospects, our share price would likely decline.  If one or more of these analysts ceases coverage of our company or fails to regularly publish reports on us, we could lose visibility in the financial markets, which could cause our share price or trading volume to decline.

 

We do not intend to pay dividends for the foreseeable future and, consequently, stockholders’ ability to achieve a return on their investment will depend on appreciation in the price of our common stock.

 

We intend to retain any earnings to finance the operation and expansion of our business, and we do not anticipate paying any cash dividends on our common stock. As a result, stockholders may only receive a return on their investment in our common stock if the market price of our common stock increases.

 

Our charter documents and Nevada law could discourage takeover attempts and lead to management entrenchment.

 

Our articles of incorporation and bylaws contain provisions that could delay or prevent a change in control of our company.  These provisions could also make it difficult for stockholders to take other corporate actions, including effecting changes in our management.  These provisions include:

 

 

 

 

 

We also are subject to provisions of Nevada law found in Nevada Revised Statutes, Sections 78.411 to 78.444, inclusive, that prohibit us from engaging in any business combination with any “interested stockholder,” meaning generally that a stockholder who beneficially owns 10 percent or more of our stock, cannot acquire us for a period of time after the date this person became an interested stockholder, unless various conditions are met, such as approval of the transaction by our board of directors and stockholders.

 

Risks Related to Government Regulation

 

Our failure to comply with U.S. laws and regulations relating to the export and import of goods, technology, and software could subject us to penalties and other sanctions and restrict our ability to license and develop our circuit designs.

 

We are obligated by law to comply with all U.S. laws and regulations governing the export and import of goods, technology, and services, including the International Traffic in Arms Regulations, or ITAR, the Export Administration Regulations, or EAR, regulations administered by the Department of Treasury’s Office of Foreign Assets Control, and regulations administered by the Bureau of Alcohol Tobacco Firearms and Explosives governing the importation of items on the U.S. Munitions Import List.  Pursuant to these regulations, we are responsible for determining the proper licensing jurisdiction and export classification of our products, and obtaining all necessary licenses or other approvals, if required, for exports and imports of technical data, and software, or for the provision of technical assistance or other defense services to or on behalf of foreign persons.  We are also required to obtain export licenses, if required, before employing or otherwise utilizing foreign persons in the performance of our contracts if the foreign person will have access to export-controlled technical data or software.  The violation of any of the applicable laws and regulations could subject us to administrative, civil, and criminal penalties.

 

These regulations could restrict our ability to sell products and develop new products.  For example, as a result of ITAR requirements, we are unable to supply certain products to China satellite companies or end users, which comprise a significant part of the overall satellite market. Changes in our products or changes in export and import regulations may create delays in the introduction of our products in international markets, prevent our customers with international operations from deploying products incorporating our products throughout their global systems or, in some cases, prevent the export or import of products that include our products to certain countries altogether. Any change in export or import regulations or related legislation, shift in approach to the enforcement or scope of existing regulations, or change in the countries, persons, or technologies targeted by such regulations, could result in decreased use of our products by, or our ability to export or license our products to, existing or potential customers with international operations and decreased revenue. Additionally, failure to comply with these laws could result in sanctions by the U.S. government, including substantial monetary penalties, denial of export privileges, and debarment from government contracts.

 

If we fail to comply with anti-bribery laws, including the U.S. Foreign Corrupt Practices Act, or FCPA, we could be subject to civil and/or criminal penalties.

 

As a result of our international operations, we may be subject to anti-bribery laws, including the FCPA, which prohibits companies from making improper payments to foreign officials for the purpose of obtaining or keeping business.  If we fail to comply with these laws, the U.S. Department of Justice, the Securities and Exchange Commission, or SEC, or other U.S. or foreign governmental authorities could seek civil and/or criminal sanctions, including monetary fines and penalties against us or our employees, as well as additional changes to our business practices and compliance programs, which could have a material adverse effect on our business, results of operations, or financial condition.

 

ITEM 1B.UNRESOLVED STAFF COMMENTS

 

None.

 

ITEM 2.PROPERTIES

 

We maintain our principal office, totaling approximately 3,000 square feet, in Westlake Village, California, under a lease that expires in 2020.  We maintain additional leased spaces, totaling approximately 23,000 square feet, in several locations, including manufacturing facilities in Simi Valley, California and Shenzhen, China, a research and development center in Singapore, and regional offices in Hong Kong, China and Tokyo, Japan.  We believe that our

facilities are adequate to meet our needs for the immediate future, and that, should it be needed, we will be able to secure additional space to accommodate any expansion of our operations.

 

ITEM 3.LEGAL PROCEEDINGS

 

We are not party to any legal proceedings. We may, from time to time, be party to litigation and subject to claims incident to the ordinary course of business. As our growth continues, we may become party to an increasing number of litigation matters and claims. The outcome of litigation and claims cannot be predicted with certainty, and the resolution of any future matters could materially affect our future financial position, results of operations or cash flows.

 

ITEM 4.MINE SAFETY DISCLOSURES

 

Not applicable.

 

PART II

ITEM 5.MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

 

Market Information for Common Stock

 

Our common stock is quoted on the OTCPink marketplace of the OTC Markets Group under the symbol “LINK”. The following table sets forth, for the periods indicated, the high and low closing bid prices of our common stock as reported by the OTC Markets Group. The following quotations reflect inter-dealer prices, without retail mark-ups, markdowns, or commissions, and do not necessarily represent actual transactions:

 

 

On March 22, 2016, the last reported sale price of our common stock on the OTCPink marketplace of the OTC Markets Group was $8.00 per share.

 

Holders of Record

 

As of March 22, 2016 we had 52 holders of record of our common stock. The actual number of stockholders is greater than this number of record holders and includes stockholders who are beneficial owners but whose shares are held in street name by brokers and other nominees.

 

Dividend Policy

 

We have never declared or paid cash dividends on our common stock. We currently intend to retain all available funds and any future earnings for use in the operation of our business and do not anticipate paying any dividends on our common stock in the foreseeable future, if at all. Any future determination to declare dividends will be made at the discretion of our board of directors and will depend on our financial condition, results of operations, capital requirements, general business conditions and other factors that our board of directors may deem relevant.

 

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

 

None.

 

Recent Sale of Unregistered Securities

 

None.

 

ITEM 6.SELECTED FINANCIAL DATA

 

Not applicable.

ITEM 7.MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

You should read the following discussion and analysis of our financial condition and results of operations in conjunction with the consolidated financial statements and the related notes to the consolidated financial statements included later in this Annual Report on Form 10-K. In addition to historical financial information, the following discussion contains forward-looking statements that reflect our plans, estimates, beliefs and expectations that involve risks and uncertainties. Our actual results and the timing of events could differ materially from those discussed in these forward-looking statements. Factors that could cause or contribute to these differences include those discussed below and elsewhere in this Annual Report on Form 10-K, particularly in “Risk Factors” and “Special Note Regarding Forward-Looking Statements.”

 

Overview

 

Interlink Electronics, Inc. (“Interlink”, the “Company”, “we”, “us”, “our”) designs, develops, manufactures and sells a range of force-sensing technologies that incorporate our proprietary materials technology, firmware and software into a portfolio of standard products and custom solutions.  These include sensor components, subassemblies, modules and products that support effective, efficient cursor control and novel 3 dimensional user inputs.  Our disruptive, leading edge human machine interface, or HMI, technology platforms are deployed in a wide range of markets including consumer electronics, automotive, industrial, and medical. Our solutions have focused on handheld user input, menu navigation, cursor control, and other intuitive interface technologies for the world’s top electronics manufacturers.

 

We sell our products globally to a diverse array of customers that include the Fortune 500 as well as start-ups, design houses, original design manufacturers, original equipment manufacturers and universities.  Our technology has been deployed in the consumer electronics, industrial automation, automotive and medical markets.  Our global presence in the United States, China, Singapore and Japan, allows us to provide local sales and engineering support services to our existing and future customers.   Our products are manufactured by our wholly-owned subsidiary in a state-of-the-art facility in Shenzhen, China.  We also maintain manufacturing operations in Simi Valley, California. We control 100% of the manufacturing and shipping process which enables us to respond quickly to customer product demand and design requirements. 

 

Over the next five years, we anticipate investing significantly in the expansion of our technology platforms through our own internal development to ensure we provide the market with leading-edge HMI solutions that are seamless to deploy and preform flawlessly.  We anticipate dramatically growing our R&D organization in Singapore to ensure we have the right team to launch our current designs and develop new product offerings that will meet the market’s growing demand for touch technology.  Our Singapore location will allow us to take advantage of the abundance of engineering talent for future new product development.  We also plan to explore potential strategic relationships with Singapore-based companies and technology institutes that will support our growth initiatives.

 

Results of Operations

 

The following table sets forth certain consolidated statements of operations data for the periods indicated. The percentages in the table are based on net revenues.

 

 

Comparison of the Years Ended December 31, 2015 and 2014

 

Revenue, net by Market is as follows:

 

 

We sell our custom products into the following markets: automotive, industrial, medical and consumer.  We sell our standard products in many different markets which are often unknown to us at the time of sale.  Each market has different product design cycles.  Products with longer design cycles often have much longer product life-cycles. Automotive, industrial, and medical products generally have longer design and life-cycles than consumer products.  We currently have products with life-cycles that have exceeded twenty years and are ongoing.

 

The increase in net revenues was driven by increased sales of our custom products in automotive, medical and consumer

markets, partially offset by decreased sales of our custom products into the industrial markets and a decrease in sales of our standard products. The growth in our custom product sales was driven by increased sales to our current customers. The decrease in custom industrial market sales was driven by the absorption of product purchased in the previous year by two of our larger customers. Standard product sales decreased primarily due to a customer’s decision to put a product through “end-of-life”, resulting in decreased sales of the product in 2015.

 

 

Our cost of revenue is impacted by various factors including product mix, volume, material costs, manufacturing efficiencies, facilities costs, compensation costs and any provisions for excess and obsolete inventories. The decrease in cost of revenue was primarily due to savings obtained upon the relocation of our corporate headquarters along with decreased compensation costs as we aligned our quality processes to support our Shenzhen manufacturing facility along with efficiencies gained in manufacturing staffing.  Cost of revenues decreased as a percentage of revenues primarily due to efficiencies gained, including improved utilization of fixed costs, as revenues increased.

 

 

 

Product development and research expenses, or R&D, consist primarily of compensation expenses for employees engaged in research, design and development activities.  Our R&D team focuses both on internal design development, as well as design development aimed at addressing customer design challenges, in order to develop our HMI solutions.  

 

Our R&D costs remained relatively consistent with the prior year. In the prior year, we temporarily reallocated R&D staff to manufacturing processes in order to meet our rapid growth in sales. In future periods, we anticipate engineering, research and development costs to continue to surpass prior years as we normalize manufacturing staffing to meet our current production levels and then increase our engineering, research and development staffing to enhance our technology and product offerings. We intend to grow our global research and development center in Singapore substantially over the next five years, including by expanding our research and development team by approximately 20% per year, expanding the size of the facility, and investing in additional tools and equipment.

 

 

Selling, general and administrative expenses, or SG&A, consist primarily of compensation expenses, legal and other professional fees, facilities expenses and communication expenses. The increase in SG&A expense is driven by increased compensation costs as we expand our SG&A team to support our growing business, increased professional

fees to support our efforts to regain active filing status with the Securities and Exchange Commission and to pursue our Nasdaq relisting, as well as increases in insurance costs.

 

Liquidity and Capital Resources

 

As of December 31, 2015, we had cash and cash equivalents of $4.4 million of which $459,000 was held by our foreign subsidiaries, working capital of $6.5 million and no indebtedness.  Cash and cash equivalents consist of cash and money market funds. We did not have any short-term or long-term investments as of December 31, 2015.

 

We believe that our existing cash and cash equivalents balance will be sufficient to meet our business requirements for at least the next twelve months. If we require additional cash, we may attempt to raise additional capital through equity, equity-linked or debt financing arrangements. If we raise additional funds by issuing equity or equity-linked securities, the ownership of our existing stockholders will be diluted. If we raise additional financing by the incurrence of indebtedness, we will be subject to fixed payment obligations and could also be subject to restrictive covenants, such as limitations on our ability to incur additional debt, and other operating restrictions that could adversely impact our ability to conduct our business. If we are unable to raise additional needed funds, we may also take measures to reduce expenses to offset any shortfall.

 

There can be no assurances that we will be able to raise additional needed capital on acceptable terms or at all, and the failure to do so could adversely affect our ability to achieve our business objectives. In addition, if our future operating performance is below our expectations, our liquidity and ability to operate our business could be adversely affected.

 

Cash Flow Analysis

 

Our cash flows from operating, investing and financing activities are summarized as follows:

 

 

Net Cash Provided By Operating Activities

 

For the year ended December 31, 2015, the $2.1 million in net cash provided by operating activities was primarily attributable to net income of $1.7 million and adjustments for non-cash charges of $135,000. The net change to operating assets of $272,000 was primarily due to the decrease of $229,000 in accounts receivable and $61,000 in inventory, as well as an increase of $15,000 in accounts payable, accrued payables, accrued expenses and other accrued liabilities  partially offset by a decrease of  $34,000 in deferred revenue.

 

For the year ended December 31, 2014, the $1.0 million in net cash provided by operating activities was primarily attributable to net income of $1.6 million. The net change to operating assets of $551,000 was primarily due to the increase of $291,000 in accounts receivable and $343,000 in inventory partially offset by a decrease of $156,000 in accounts payable, accrued expenses and other liabilities and $60,000 in deferred revenue.

 

Accounts receivable decreased from $1.8 million at December 31, 2014 to $1.6 million at December 31, 2015 due to the timing of shipments and payments at year-end. Inventories decreased from $1.1 million at December 31, 2014 to $1.0 million at December 31, 2015.  Inventory balances will fluctuate depending on the timing of materials purchases and product shipment.  Accounts payable, accrued payables, accrued expenses, and other accrued liabilities increased from $773,000 at December 31, 2014 to $788,000 at December 31, 2015 primarily due to the timing of payment for materials purchases.  Deferred revenue decreased from $145,000 at December 31, 2014 to $111,000 at December 31, 2015 primarily due to the recognition of non-recurring engineering fees as deliverables were provided to the customer.

 

Net Cash Used In Investing Activities

 

Net cash used in investing activities of $68,000 for the year ended December 31, 2015 related to the purchase of capital equipment in the US and China. 

 

Net Cash Provided By Financing Activities

 

There were no financing activities for the year ended December 31, 2015 and $16,000 of proceeds from the exercise of stock options for the year ended December 31, 2014.

 

Off-Balance Sheet Transactions

 

We do not have any off-balance sheet arrangements.

 

Contractual Obligations and Known Future Cash Requirements

 

Indemnification Agreements

 

In the ordinary course of business, we enter into agreements of varying scope and terms pursuant to which we agree to indemnify customers, vendors, lessors, business partners and other parties with respect to certain matters, including, but not limited to, losses arising out of breach of such agreements, services to be provided by us or from intellectual property infringement claims made by third parties. In addition, we have entered into indemnification agreements with directors and certain officers and employees that will require us, among other things, to indemnify them against certain liabilities that may arise by reason of their status or service as directors, officers or employees. No demands have been made upon us to provide indemnification under such agreements and there are no claims that we are aware of that could have a material effect on our consolidated financial position and results of operations.

 

Operating Leases

 

We lease various office and manufacturing facilities, including our corporate headquarters in Westlake Village, California, under operating lease agreements that expire through 2020. The terms of the lease agreements provide for rental payments on a graduated basis. We recognize rent expense on a straight-line basis over the lease periods.

 

Commitments

 

As of December 31, 2015, our principal commitments consisted of obligations under the operating leases for our offices. The following table summarizes our future minimum payments under these arrangements:

 

 

Critical Accounting Policies and Estimates

 

We prepare our consolidated financial statements in accordance with U.S. GAAP.  The preparation of consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, costs and expenses, and related disclosures.  We evaluate our estimates and assumptions on an ongoing basis. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances.  Actual results could differ significantly from the estimates made by our management.  To the extent that there are differences between our estimates and actual results, our future financial statements presentation, financial condition, results of operations, and cash flows will be affected. 

 

We believe that the assumptions and estimates associated with revenue recognition, inventory valuation, accounts receivable, stock-based compensation expense and income taxes have the greatest potential impact on our consolidated financial statements. Therefore, we consider these to be our critical accounting policies and estimates. For further information on all of our significant accounting policies, see the notes to our consolidated financial statements.

 

Revenue Recognition

 

We recognize revenue when there is persuasive evidence that an arrangement exists, title and risk of loss have passed, delivery has occurred or the services have been rendered, the sales price is fixed or determinable and collection of the related receivable is reasonably assured.  Title and risk of loss generally pass to our customers upon shipment.  In limited circumstances where either title or risk of loss pass upon destination or acceptance or when collection is not reasonably assured, we defer revenue recognition until such events occur.

 

We input orders based upon receipt of a customer purchase order, confirm pricing through the customer purchase order, validate credit worthiness through past payment history or other financial data and record revenue upon shipment of goods and when risk of loss and title transfer.  All customers have warranty rights, and some customers have explicit or implicit rights of return.  We record reserves for potential customer returns and warranty rights.

 

Inventory Valuation

 

Inventories are stated at lower of cost or market and consist of materials, labor and overhead. Inventory costs are determined using standard costs which approximate actual costs under the first-in, first-out method. We evaluate inventories for excess quantities and obsolescence. Our evaluation considers market and economic conditions; technology changes, new product introductions, and changes in strategic business direction; and requires estimates that may include elements that are uncertain. In order to state the inventory at lower of cost or market, we maintain reserves against individual stocking units. Inventory write-downs, once established, are not reversed until the related inventories have been sold or scrapped. If future demand or market conditions are less favorable than our projections, a write-down of inventory may be required, and would be reflected in cost of goods sold in the period the revision is made.

 

Accounts Receivable and Allowance for Doubtful Accounts

 

Accounts receivable are recorded at the invoice amount and presented net of the allowance for doubtful accounts; they do not bear interest. We evaluate the collectability of accounts receivable at each balance sheet date using a combination of factors, such as historical experience, credit quality, age of the accounts receivable balances, and economic conditions that may affect a customer’s ability to pay.  We include any accounts receivable balances that are determined to be uncollectible in the overall allowance for doubtful accounts using the specific identification method. After all attempts to collect a receivable have failed, the receivable is written off against the allowance. 

 

Stock Based Compensation

 

We account for stock based compensation under ASC Topic 718, Compensation-Stock Compensation, which requires us to record related compensation costs. Calculating the fair value of stock-based compensation awards requires the input of highly subjective assumptions, including the expected life of the awards and expected volatility of our stock price. Expected volatility is a statistical measure of the amount by which a stock price is expected to fluctuate during a period. Our estimates of expected volatilities are based on weighted historical implied volatility. The expected forfeiture rate applied in calculating stock-based compensation cost is estimated using historical data and is updated annually.

 

The assumptions used in calculating the fair value of stock-based awards involve estimates that require management judgment. If factors change and we use different assumptions, our stock-based compensation expense could change significantly in the future. In addition, if our actual forfeiture rate is different from our estimate, our stock-based compensation expense could change significantly in the future.

 

Income Taxes

 

We account for income taxes using the asset and liability method which requires recognition of deferred tax liabilities and assets for the expected future tax consequences of events that have been included in the financial statements or tax returns. Under this method, we must make estimates and judgments in determining the provision for taxes for financial statement purposes. These estimates and judgments occur in the calculation of tax credits, benefits, and deductions, and in the calculation of certain tax assets and liabilities that arise from differences in the timing of recognition of revenue and expense for tax and financial statement purposes, as well as the interest and penalties related to uncertain tax positions. In addition, the Company operates within multiple tax jurisdictions and is subject to audit in these jurisdictions. Significant changes in these estimates may result in an increase or decrease to our tax provision in a subsequent period. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date.

 

Our foreign subsidiaries are subject to foreign income taxes on earnings in their respective jurisdictions.  Earnings of our foreign subsidiaries are not included in our U.S. federal income tax return until earnings are repatriated. We are generally eligible to receive tax credits on repatriated earnings on our U.S. federal income tax return for foreign taxes paid by our subsidiaries.

 

We must assess the likelihood that we will be able to recover our deferred tax assets. Our valuation allowance against the deferred tax assets is based on our assessments of historical losses and projected operating results in future periods on a “more likely than not” basis. If and when we generate future taxable income in our tax jurisdictions against which these tax assets may be applied, some portion or all of the valuation allowance would be reversed and an increase in net income would consequently be reported in future years.

 

The calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax regulations. We recognize liabilities for uncertain tax positions based on a two-step process. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained on audit, including resolution of related appeals or litigation processes, if any. If we determine that a tax position will more likely than not be sustained on audit, the second step requires us to estimate and measure the tax benefit as the largest amount that is more than 50% likely to be realized upon ultimate settlement. It is inherently difficult and subjective to estimate such amounts, as we have to determine the probability of various possible outcomes. We re-evaluate these uncertain tax positions on a quarterly basis. This evaluation is based on factors such as changes in facts or circumstances, changes in tax law, new audit activity, and effectively settled issues. Determining whether an uncertain tax position is effectively settled requires judgment. Such a change in recognition or measurement would result in the recognition of a tax benefit or an additional charge to the tax provision in the period in which a change in judgment occurs.

 

Recently Issued and Adopted Accounting Pronouncements

 

In May 2014, the FASB issued ASU No. 2014-09, “Revenue from Contracts with Customers (Topic 606).”  The amendments to this update supersede nearly all existing revenue recognition guidance under GAAP. The standard was originally set to become effective in annual periods beginning after December 15, 2016 and for interim and annual reporting periods thereafter. In August 2015, the FASB issued ASU 2015-14 Revenue from Contracts with Customers; Deferral of the Effective Date, which defers the effective date of ASU 2014-09 for all entities by one year, thereby delaying the effective date of the standard to January 1, 2018, with an option that would permit companies to adopt the standard as early as the original effective date. Early adoption prior to the original effective date is not permitted. The core principle of this Topic is to recognize revenues when promised goods or services are transferred to customers in an amount that reflects the consideration that is expected to be received for those goods or services. This Topic defines a five-step process to achieve this core principle and, in doing so, it is possible more judgment and estimates may be required within the revenue recognition process than required under existing GAAP including identifying performance obligations in the contract, estimating the amount of variable consideration to include in the transaction price and

allocating the transaction price to each separate performance obligation. The Company has not yet assessed the impact of ASU 2014-09.

 

In June 2014, the FASB issued ASU No. 2014-12, “Compensation—Stock Compensation (Topic 718): Accounting for Share-Based Payments When the Terms of an Award Provide That a Performance Target Could Be Achieved after the Requisite Service Period (a consensus of the FASB Emerging Issues Task Force)”, effective for annual periods and interim periods within those annual periods, beginning after December 15, 2015. This update is intended to resolve the diverse accounting treatment of share-based payment awards whose performance target may be achieved after the requisite service period. An entity may apply the standards (1) prospectively to all share-based payment awards that are granted or modified on or after the effective date, or (2) retrospectively to all awards with performance targets that are outstanding as of the beginning of the earliest annual period presented in the financial statements and to all new or modified awards thereafter. Earlier application is permitted. Effective January 1, 2016, the Company adopted ASU No. 2014-12 and does not anticipate it will have a material affect on its consolidated financial statements.

 

In August 2014, the FASB issued ASU No. 2014-15, “Presentation of Financial Statements – Going Concern (Sub-Topic 205-40)”, which provides guidance in GAAP about management’s responsibility to evaluate whether there is substantial doubt about an entity’s ability to continue as a going concern and to provide related footnote disclosures. This update is effective for annual periods ending after December 15, 2016 and for annual periods and interim periods thereafter. Early application is permitted. The Company has not yet assessed the impact of ASU 2014-15 on its consolidated financial statements.  

 

In February 2015, the Financial Accounts Standards Board, or FASB, issued ASU 2015-02,  “Consolidation (Topic 810),” to change the analysis that a reporting entity must perform to determine whether it should consolidate certain types of legal entities. The standard is effective for fiscal and interim periods within those fiscal years, beginning after December 15, 2015.  Effective January 1, 2016, the Company adopted ASU No. 2014-12 and does not anticipate it will have a material affect on its consolidated financial statements.

 

In July 2015, the FASB issued ASU 2015-11, “Simplifying the Measurement of Inventory,” which provides new guidance regarding the measurement of inventory. The new guidance requires most inventory to be measured at the lower of cost or net realizable value. The standard defines net realizable value as estimated selling prices in the ordinary course of business, less reasonably predictable costs of completion, disposal and transportation. The standard applies to companies other than those that measure inventory using last-in, first-out ("LIFO") or the retail inventory method. The standard will be effective for annual reporting periods beginning after December 15, 2016, including interim periods within those reporting periods. Early application is permitted. The Company has not yet evaluated the impact of the adoption of this accounting standard on its consolidated financial statements.

 

In November 2015, the FASB issued ASU No. 2015-17, “Balance Sheet Classification of Deferred Taxes,” which requires entities to present deferred tax assets and deferred tax liabilities as noncurrent in a classified balance sheet. The ASU may be applied prospectively or retrospectively. The Company adopted the ASU on January 1, 2016, to be applied retrospectively.

 

In February 2016, the FASB issued ASU No. 2016-02, “Leases,” which replaces the existing guidance in ASC 840, Leases. The new standard establishes a right-of-use (ROU) model that requires a lessee to record a ROU asset and a lease liability on the balance sheet for all leases with terms longer than 12 months. Leases will be classified as either finance or operating, with classification affecting the pattern of expense recognition in the income statement.   The guidance is effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years and requires retrospective application. The Company will adopt in Fiscal 2019 and is currently evaluating the impact of ASU 2016-02 to its consolidated financial statements.

 

ITEM 7A.QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

 

Not applicable.

ITEM 8.FINANCIAL STATEMENTS AND SUPPLEMENTAL DATA

 

INTERLINK ELECTRONICS, INC.
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

 

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

To the Audit Committee of the Board of Directors and

Shareholders of Interlink Electronics, Inc. & Subsidiaries

 

We have audited the accompanying consolidated balance sheet of Interlink Electronics, Inc. & Subsidiaries (the “Company”) as of December 31, 2015, and the related consolidated statements of comprehensive income, stockholders’ equity and cash flows for the year then ended.  These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audit.

 

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States).  Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement.  The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.  An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation.  We believe that our audit provides a reasonable basis for our opinion.

 

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of Interlink Electronics, Inc. & Subsidiaries, as of December 31, 2015, and the consolidated results of their operations and their cash flows for the year then ended in conformity with accounting principles generally accepted in the United States of America.

 

/s/Marcum LLP

Los Angeles, CA

March 25, 2016

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

 

To the Board of Directors

Interlink Electronics, Inc. and its subsidiaries

Westlake Village, California

 

We have audited the accompanying consolidated balance sheet of Interlink Electronics, Inc. and its subsidiaries (collectively, the “Company”) as of December 31, 2014, and the related consolidated statement of comprehensive income, stockholders’ equity and cash flows for the year then ended. These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audit.

 

We conducted our audit in accordance with standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.

 

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company as of December 31, 2014, and the results of its  operations and its cash flows for the year then ended, in conformity with U.S. generally accepted accounting principles.

 

 

/s/SingerLewak LLP

 

Los Angeles, California

December 11, 2015

 

 

INTERLINK ELECTRONICS, INC.

CONSOLIDATED BALANCE SHEETS

 

 

 

 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

 

 

 

INTERLINK ELECTRONICS, INC.

Consolidated Statements of Comprehensive Income

 

 

 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

 

 

 

INTERLINK ELECTRONICS, INC.

Consolidated Statements of Stockholders’ Equity

 

 

The accompanying notes are an integral part of these consolidated financial statements.