INTERLINK ELECTRONICS INC - Annual Report: 2021 (Form 10-K)

Table of Contents

​

​

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

☒    ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2021

OR

☐    TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from __________________ to ______________________.

Commission file number 001-37659

INTERLINK ELECTRONICS, INC.

(Exact name of registrant as specified in its charter)

​

(805) 484-8855

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

​

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐  No  ☒

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ☐  No  ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes  ☒  No  ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes  ☒  No  ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

​

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes  ☐  No  ☒

As of June 30, 2021, the aggregate market value of the voting and non-voting common equity held by non-affiliates was $9,229,412, based on the closing price on that date.

As of March 29, 2022, the registrant had 6,602,498 shares of common stock issued and outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

None

​

​

​

​

Table of Contents

INTERLINK ELECTRONICS, INC.

FORM 10-K

FOR THE YEAR ENDED DECEMBER 31, 2021

TABLE OF CONTENTS

​

​

​

​

​

2

Table of Contents

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

Certain statements and information in this Annual Report on Form 10-K may constitute forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended, or the Exchange Act. The words “believe,” “may,” “will,” “potentially,” “estimate,” “continue,” “anticipate,” “intend,” “could,” “would,” “project,” “plan,” “expect” and similar expressions that convey uncertainty of future events or outcomes are intended to identify forward-looking statements. These statements involve known and unknown risks, uncertainties and other important factors that may cause our actual results, performance or achievements to be materially different from any future results, performances or achievements expressed or implied by the forward-looking statements. These forward-looking statements may include, but are not limited to, statements concerning the following:

3

Table of Contents

These forward-looking statements speak only as of the date of this Form 10-K and are subject to uncertainties, assumptions and business and economic risks. As such, our actual results could differ materially from those set forth in the forward-looking statements as a result of the factors set forth below in Part I, Item 1A, “Risk Factors,” and in our other reports filed with the Securities and Exchange Commission, or SEC. Moreover, we operate in a very competitive and rapidly changing environment, and new risks emerge from time to time. It is not possible for us to predict all risks, nor can we assess the impact of all factors on our business or the extent to which any factor, or combination of factors, may cause actual results to differ materially from those contained in any forward-looking statements we may make. In light of these risks, uncertainties and assumptions, the forward-looking events and circumstances discussed in this Form 10-K may not occur, and actual results could differ materially and adversely from those anticipated or implied in our forward-looking statements.

You should not rely upon forward-looking statements as predictions of future events. Although we believe that the expectations reflected in our forward-looking statements are reasonable, we cannot guarantee that the future results, levels of activity, performance or events and circumstances described in the forward-looking statements will be achieved or occur. Moreover, neither we nor any other person assumes responsibility for the accuracy and completeness of the forward-looking statements. We undertake no obligation to update publicly any forward-looking statements for any reason after the date of this Form 10-K to conform these statements to actual results or to changes in our expectations, except as required by law.

You should read this Annual Report on Form 10-K and the documents that we reference in this Annual Report on Form 10-K and have filed with the SEC as exhibits hereto with the understanding that our actual future results and circumstances may be materially different from what we expect.

​

PART I

ITEM 1.    BUSINESS

Our Company

Interlink Electronics, Inc. (“we”, “us”, “our”, “Interlink” or the “Company”) designs, develops, manufactures and sells a range of force-sensing technologies that incorporate our proprietary materials technology, firmware and software into a portfolio of standard products and custom solutions. These include sensor components, subassemblies, modules and products that support effective, efficient cursor control and novel three-dimensional user inputs. Our Human Machine Interface (“HMI”) technology platforms are deployed in a wide range of markets including consumer electronics, automotive, industrial, and medical. The application of our HMI technology platforms includes vehicle entry, vehicle multi-media control interface, rugged touch controls, presence detection, collision detection, speed and torque controls, pressure mapping, biological monitoring and others.

Interlink has been a leader in the printed electronics industry for over 35 years with the commercialization of our patented Force-Sensing Resistor (“FSR®”) technology that has enabled rugged and reliable HMI solutions. Our solutions have focused on handheld user input, menu navigation, cursor control, and other intuitive interface technologies for the world’s top electronics manufacturers.

We invented FSR® technology and pioneered commercialization of printed electronics manufacturing, paving the way for industry-wide adoption of force sensing technology. Our extensive knowledge and experience with this technology, along with the firmware we incorporate in our HMI solutions, differentiates us from other providers of HMI solutions. We, along with our customers, incorporate our FSR® and force sensing sensors and modules into end user products. Our sensors and modules are used in electronics devices and systems where user input must be converted into useful output data. Our force sensing technology solution platforms enabled industry-first implementations in gaming, smartphone, rugged notebook, automotive cockpit and automotive entry applications. Consumer and end-user demand for enhanced user experience is driving the need for innovative multi-modal HMI technologies and applications. Force sensing input provides a critical novel modality that drives a paradigm shift in HMI.

Market requirements for innovative solutions that enable smaller, thinner devices, lower power consumption, highly refined designs, better navigation and more intuitive usability in all environments, are also driving increased demand for our products. Industry is moving towards the use of multi-modal HMI in the home, industrial, medical and automotive spaces. Interlink delivers cutting edge, high performance HMI solutions for customers who wish to replace outdated switches and knobs in these environments.

4

Table of Contents

Significant market opportunities are rapidly emerging for us to improve upon the functionality of standard capacitive sensors which are widely available and competitively priced. Inadvertent activation, where users unintentionally activate a control, is a common problem with capacitive technology. In contrast, force sensing solutions require a deliberate application of force to operate. We have had recent success in using our force sensing solutions in combination with capacitive technologies to minimize the latter’s performance issues, enabling force sensing solutions to complement competitive technologies and provide hybrid solutions and open up new opportunities for growth. We continue to simultaneously expand our standard product portfolio and develop new technology platforms to grow existing markets and capture emerging markets. This portfolio expansion will incorporate other complimentary sensing technologies. This broader portfolio of technologies will allow us to use our expertise in integrating multiple sensing technologies for applications in the rapidly growing Internet-of-Things (“IoT”).

Interlink serves our world-wide customer base from our corporate headquarters in Irvine, California (Orange County area) and from our facility in Camarillo, California (Ventura County). We have established a Global Product Development and Materials Science Center in our Camarillo footprint. This facility has a state-of-the-art printed electronics development laboratory as well as materials science lab. Our engineering team is based in this center where we work with our U.S. and global customers on developing, engineering, prototyping and implementing our advanced HMI and sensing solutions. We also maintain a small embedded software and IoT application development center in Singapore, and we expect to launch an engineering, research and development center in the United Kingdom in 2022. We manufacture all our products in our printed electronics manufacturing facility in Shenzhen, China, which has been in operation since 2006. In addition, we maintain a global distribution and logistics center in Hong Kong, a technical sales office in Japan, and several manufacturer representatives and distributors in strategic locations in our key markets, all of which allows us to support our global customer base. We sell our products in a wide range of markets, including consumer electronics, automotive, industrial and medical. Our customers are some of the world’s largest companies and most recognizable brands.

We were incorporated in California in 1985. In 1996, we re-incorporated into a Delaware corporation and, in 2012, we again changed our domicile from Delaware to Nevada by completing a merger with a newly formed Nevada corporation named Interlink Electronics, Inc.

Our principal executive office is located at 1 Jenner, Suite 200, Irvine, California 92618 and our telephone number is (805) 484-8855. Our website address is www.interlinkelectronics.com. Interlink makes available its annual financial statements, quarterly financial statements, and other significant reports and amendments to such reports, free of charge, on its website as soon as reasonably practicable after such reports are prepared.

Our Industry

HMI technologies have been available since the early 1970’s but were used almost exclusively in industrial products during the first 20 years of their existence. The introduction of touchpad mouse devices for laptop computers in the early 1990’s represented the first significant transition of HMI technologies into the consumer electronics market. Personal devices utilizing touch sensitive technology became ubiquitous in our daily human-machine interactions with the introduction in 2007 of smart phone technology incorporating capacitive touchscreens. As the smart phone became an integral part of consumers’ daily lives throughout the world, it influenced consumers’ expectations of how we should interact with all types of devices. Whether those devices are personal electronics, industrial and medical equipment, or automobiles, users of this equipment expect sleek, highly-functioning design including touch-sensing technology. Consumers no longer want to push buttons or flip switches; rather, they expect smooth touch pads and gesture-driven input. Engineers are responding to this demand by incorporating touch sensitive technology into a wide range of products, and any device that can utilize force and position sensing inputs to control or enhance its functionality is a candidate for use of the technology.

The products and solutions that we design, develop and manufacture for HMI and IoT applications are primarily printed electronic products. Printed electronics is an additive manufacturing technology used to create electrical devices on various substrates. For over 35 years we have honed and developed the processes necessary to manufacture high quality printed electronic products for HMI applications. Printed electronic technologies are emerging as potential low-cost replacements to silicon-based electronics in many specific application areas. As reported by industry analyst group IDTechEx, printed force sensors alone already account for approximately 30% of printed sensor market share, and by 2025, the projected market for all printed sensor components is expected to surpass $8 billion. According to the IDTechEx study Printed, Organic and Flexible Electronics 2020-2030: Forecasts, Technologies, Markets, the total market for printed, flexible, and organic electronics will grow from $41.2 billion in 2020 to $74 billion in 2030. The majority of that is OLEDs (organic but not printed) and conductive ink used for a wide range of applications, however, stretchable

5

Table of Contents

electronics, logic and memory, thin film sensors have huge growth potential. As a member of OE-A, the Organic and Printed Electronics Association, we actively influence and contribute to the global landscape of printed electronics.

Internet-Of-Things -enabled intelligent sensing applications are gaining rapid commercial attention. Our sensing technology platforms are capable of providing the critical backbone for data sensing, measurement and analytics used in emerging wireless connectivity implementations in both short-range low-power wireless communications such as Bluetooth and long-range ultra low-power wireless communications such as LoRaWAN®.

Our Strategy

Our primary objective is to be the global leader and provider of multi-sensing based HMI technology solutions for the automotive, consumer electronics, medical and industrial automation markets. We also intend to utilize our role as a disruptive technology provider to bring our HMI solutions to new markets. To achieve our strategy, we intend to:

​

​

​

​

​

​

Our product development teams are skilled in concept definition, rapid prototyping, hardware and firmware development and integration support. Interlink benefits from its own world-class manufacturing facility in Shenzhen, China, allowing us to react quickly to customer needs, while ensuring the highest quality standards. We also maintain a technical sales force that can address new and existing customer opportunities worldwide. Our teams engage early in the development phase with our customers and we provide critical design inputs to ensure the solutions developed address the customer’s needs and meet their design goals and intent. We strive to solve our customers’ problems.

Our Technology Platforms and Products

Interlink was founded on the invention and commercialization of FSR® technology, the industry’s first force sensing solution using printed electronics manufacturing. As we transition from an FSR® sensor supplier to an HMI solutions provider, we pursue and embrace leading edge force sensing and related technology platforms. Our embedded software engineering team located in Singapore, along with our VP of Engineering & Advanced Materials and our expanding materials science and engineering team in Camarillo, California, are focused on strategic technology roadmaps, development of scalable technology platform architectures and pursuit of synergistic technology partnerships. We also expect to launch an engineering, research and development center in the United Kingdom in 2022. In an ever changing and competitive landscape, we are committed to staying ahead of the technology curve.

​

The two primary types of user-input technologies common in today’s devices are capacitive and resistive. Capacitive sensors are used in the touch screens found in most smart phones and similar devices used globally by millions of consumers. The most significant drawback to the capacitive technology is its inability to measure force, although there has been some progress recently in enhancing the technology with pseudo force sensing. Capacitive sensors have become a high-volume, low-margin commodity product.

6

Table of Contents

​

Our patented FSR® sensor technology consists of a bottom layer of conductor electrodes, a proprietary resistive material top layer and a separator between the two layers. An additional top layer that contains graphics and protects the sensor can also be added. FSR® sensors can be as thin as eight thousandths of an inch, making them particularly well suited for use where the design space is restricted, as in portable or wearable electronics. Our force sensing technology enables the sensor to be used for continuously variable control functions. For example, in a pointing device, increased pressure can be used to produce faster cursor movement. Unlike capacitive devices, an FSR® sensor’s performance is not impeded by the presence of moisture, dirt or dust, making the sensor suitable for use outdoors and in moist and other “hostile” environments. Our FSR® sensors have no moving parts, can be packaged in a sealed environment, and are low power and are less susceptible to false readings or unintended touches than capacitive sensors. We have developed sophisticated algorithms and firmware that allows our FSR® technology to become a complete solution delivering effective HMI functionality to our customers.

​

Custom Solutions

Interlink offers a comprehensive portfolio of standard solutions, from simple force sensors to multi-finger capable rugged trackpads. The largest part of our business, however, is the development and manufacture of custom solutions for our major customers. We offer full integration capability spanning initial concept to large volume manufacturing. Custom solutions can be a single or multi-technology platform to meet customer requirements and include both input and output technologies. We also offer full embedded firmware development and integration support. In many instances we work very closely with our OEM partners from the concept phase to ensure that our solutions are successfully integrated.

​

Standard Solutions

Our portfolio of standard solutions includes:

​

​

​

​

7

Table of Contents

Intellectual Property

We believe that intellectual property protection is crucial to our business. We rely on a combination of patents, copyrights, trade secrets, trademarks, nondisclosure agreements with employees and third parties, licensing and other contractual agreements with third parties to protect our intellectual property. We maintain and support an active program to protect our intellectual property primarily through the filing of patent applications and the defense of issued patents against infringement. We are not currently engaged in any patent infringement suits. We implement a ring-fencing strategy of patenting core technology platforms related to sensors, sensing systems and human interface devices. This strategy is designed to provide a strong barrier against competition in our core sensor technologies while ensuring competitive advantages in applications of sensing systems and human machine interface devices in the event a competitor successfully circumvents the core sensor patents.

​

Our failure to obtain or maintain adequate protection for our intellectual property rights for any reason could hurt our competitive position. There is no guarantee that patents will be issued from the patent applications that we have filed or may file. Our issued patents may be challenged, invalidated or circumvented, and claims of our patents may not be of sufficient scope or strength, or issued in the proper geographic regions, to provide meaningful protection or any commercial advantage. See “Risk Factors” under Item 1A of this Form 10-K for further discussion of the risks associated with patents and intellectual property.

​

Our FSR® sensors are manufactured using proprietary screen-printing techniques. All proprietary aspects of the manufacturing process are currently conducted in-house at our U.S. and China manufacturing facilities to maintain quality and protect our force sensing technology from infringement. While screen-printing is a common process in various industries, the quality and precision of printing, as well as the specific processes required to make high-quality FSR® sensors, require considerable domain knowledge expertise and know how. We believe this expertise is difficult to replicate over the short term and, to our knowledge, no unrelated party has done so. As a result, we consider this expertise to be one of our more important trade secrets. We require our employees to sign nondisclosure agreements and seek to limit access to sensitive information to the greatest practical extent.

​

As of December 31, 2021, we held twenty-three (23) patents, and had fourteen (14) patents-pending. We group our patents into three general categories: sensors, which includes eight (8) patents expiring between 2022 and 2032; sensing systems, which includes four (4) patents expiring between 2029 and 2034; and human interface devices, which includes eleven (11) patents expiring between 2024 and 2036. Our intellectual property strategy involves filing patent applications in our strategic focus markets on a regular basis. We have also strengthened our patent portfolio to align with rapidly emerging market opportunities in IoT and smart surfaces. Our sensor fusion platform portfolio, for example, enables strategic pre-positioning in capturing intelligent multi-sensing applications including, for example, haptics. The will be enabled by emerging ultra low-power wireless technologies including WiFi, BLE, LoRaWAN®, as well as cellular technologies such as LTE-M and NB-IoT.

​

Competition

The markets for our products are highly competitive and subject to rapid advancement in design technology. We must identify and capture future market opportunities by developing and deploying value-added products.

​

We compete for market share based on our customers’ selection of our components over our competitors during the design phase of their products. Our ability to compete is dependent on the needs of our customers, how well our products address those needs, our corporate relationships, and a variety of other factors.

​

We offer a disruptive technology that is replacing outdated and undesirable approaches including switch technology. We often must convince companies to abandon older, proven but less elegant technologies and adopt our solutions. This change is supported by significant end-user demand for touch-sensitive solutions. We also compete against the highly commoditized capacitive sensing technology. However, our solutions are focused on providing functionality in situations where capacitive is not the appropriate solution, is unreliable or entirely unavailable. Our hybrid sensor fusion solutions better address our customers’ unique sensing and HMI challenges.

​

The markets for our products are characterized by significant price competition and we anticipate that our products will continue to face substantial pricing pressure. Our strategy of developing and offering more sophisticated solutions including smart surface for HMI applications will maintain our leading edge over our competitors.

​

8

Table of Contents

Sales and Marketing

We sell our HMI solutions and force sensing devices through our direct sales employees as well as outside sales representatives and distributors. We work directly with large multi-national companies, small start-up companies, technology design houses and original equipment manufacturers (“OEMs”). Our sales personnel have extensive engineering backgrounds and receive substantial support from our internal engineering resources. Sales frequently result from interactions between senior management, design engineers, procurement departments, and our sales personnel. We interact with our customers throughout the product development and order process. We maintain sales offices in the United States and Japan. We primarily utilize Digi-Key Electronics, based in Thief River Falls, Minnesota, as a global, full-service distributor of our standard products. In addition to Digi-Key Electronics, we have several representative companies located in key markets so we can provide local support to strategic customers in these regions.

​

Due to the technical nature of our products, the length of our sales cycle can vary from a few months to several years and requires continued participation from our sales, engineering and management teams. Our sales cycle for our custom solutions generally includes the following two phases:

​

Design Opportunity to Design Win

​

​

​

​

Mass Production

Our Customers

Our customers include many of the world’s leading electronics companies. They encompass large multi-national organizations as well as start-ups, design houses, original design manufacturers, OEMs and universities. We supply some of the world’s largest consumer electronics manufacturers, luxury and mid-market car companies, familiar names in the medical and industrial equipment markets, research engineers and designers entering the IoT market, and companies of all different sizes in other markets.

Our customers generally do not provide us with firm, long-term volume purchase commitments, opting instead, to issue purchase orders that they can cancel, reduce, or delay at any time. In order to meet the expectations of our customers, we must provide innovative HMI solutions on a timely and cost-effective basis. This requires us to match our design and production capacity with customer demand, manage inventory, maintain satisfactory delivery schedules, and meet performance goals.

Our customer base is widely dispersed geographically. Sales to customers located outside the United States have historically accounted for a significant percentage of our revenues, a trend we expect to continue. On a bill-to basis, international sales constituted 71% and 59% of our net revenues for the years ended December 31, 2021 and 2020, respectively, with sales in 2021 to customers in China, Japan, and Taiwan accounting for 29%, 16%, and 12% of net revenues, respectively.

9

Table of Contents

Future sales of our products will be based on, among other elements, expansion into adjacent markets, continued expansion of our product line, the acceptance of our product line, expansion into additional domestic and international markets, and our ability to maintain a competitive position against other technology providers.

For the year ended December 31, 2021, we had three customers that represented 17.0%, 14.7% and 14.7% of net revenues, respectively, and have been customers of ours for 8 years, 32 years, and 9 years, respectively. These same three customers represented 17.4%, 15.8% and 11.6% of net revenues for the year ended December 31, 2020.

Manufacturing Operations and Principal Suppliers

We have our own modern manufacturing facility of approximately 14,476 square feet in Shenzhen, China that is ISO 9001, ISO 14001 and ISO 13485 certified. We plan to start the process of acquiring IATF 16949 certification in 2022 as our automotive customer base expands. We work hard to meet current environmental and sustainability standards required by our customers and legislation in various geographic markets. All products are RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) compliant. We also monitor all of our suppliers to ensure that Conflict Minerals are eliminated from our supply chain.

We purchase our materials from outside suppliers. We carefully select suppliers based on their ability to provide quality parts and components that meet technical specifications. We actively monitor these suppliers, but we are subject to substantial risks associated with the performance of our suppliers. We source certain of our components from single-suppliers, including multinational conglomerates Henkel, DuPont, Solvay, SABIC and 3M, which increases the risk of shortages and shipment delays and decreases our ability to negotiate with that supplier. Many of our products are subject to qualification testing and approval by our customers, which includes approval of the materials used in a customer’s product. These single-source materials, however, are available from other suppliers, and while their procurement from other sources likely would necessitate additional approvals from our customers and might result in short-term disruption to our business, we do have options to purchase single-sourced materials from alternative suppliers should the need arise.

Engineering, Research and Development

Rapid advancements in process technologies and increasing levels of functional integration characterize the market for our products. We believe that our future success will depend largely on our ability to continue improving our products and our process technologies, and to develop or acquire new technologies.

In 2021, we launched our new Global Product Development and Materials Science Center in Camarillo, California, where our VP of Engineering & Advanced Materials is located, along with other current and future resources. At this location, we focus on new product development including, among other areas, materials science and printed electronics. We also maintain a core embedded software engineering team in Singapore, and we expect to launch an engineering, research and development center in the United Kingdom in 2022.

We also operate an engineering center in our facility in Shenzhen, China, which is focused on sustaining engineering, customer support, quality control and new product introduction.

The global R&D team pursues scientific research, technology platform development and advanced product development in areas of materials science, printed electronics devices and manufacturing processes, and multi-disciplinary system engineering. The global R&D centers support strategic partnerships with key partners in electronics manufacturing services, digital manufacturing including 3D printing, and product development. This team also explores opportunities to work on government funded research projects that are aligned with our technology competencies.

Our Employees

As of December 31, 2021, we had 89 full-time employees worldwide. Our employees, listed in population size order from largest to smallest, are in the following departments: operations, R&D, administration, and sales. Our ability to attract and retain qualified personnel is essential to our continued success. None of our employees are represented by a collective bargaining agreement. We believe our employee relations are good.

10

Table of Contents

​

ITEM 1A.    RISK FACTORS

Investing in our common stock involves a high degree of risk. You should carefully consider the risks and uncertainties described below, together with all of the other information in this Annual Report on Form 10-K, including our consolidated financial statements and related notes, before investing in our common stock. If any of the following risks materialize, our business, financial condition, results of operations and prospects could be materially and adversely affected. In that event, the price of our common stock could decline, and you could lose part or all of your investment.

​

Risks Specific to our Company

​

We have derived, and expect to continue to derive, a significant amount of revenue from a small number of customers.

​

Historically, we have earned, and believe that in the future we will continue to earn, a substantial portion of our revenue from a relatively small number of customers. In 2021, our top three customers accounted for 17.0%, 14.7% and 14.7% of our net revenues, respectively. If we were to either lose one of our major customers or have a major customer significantly reduce its volume of business with us, our business, results of operations and financial condition would be harmed unless we are able to replace such demand with other orders promptly. We expect to continue to be dependent on our major customers, the number and identity of which may change from period to period. Because our customers generally do not provide us with firm, long-term volume purchase commitments, our customers, including our largest customers upon whom we may become dependent, can reduce or terminate altogether their business with us at any time.

​

We rely on third parties for the materials that we use to manufacture our products and a shortage of supply could adversely affect our revenues, operating results and customer relationships.

​

We rely on third-party suppliers for the raw material components of our products. There are no assurances that our suppliers will be able to maintain an adequate supply of these raw materials to enable us to fulfill all of our customers’ orders on a timely basis. A failure to obtain an adequate supply of the materials for our products could increase our costs, cause us to fail to meet delivery commitments and cause our customers to purchase from our competitors, which could adversely affect our operating results and customer relationships. In some situations, we rely on a single supplier for raw material components of our products. Any disruption in these supplier relationships could prevent us from maintaining an adequate supply of materials and could adversely affect our results of operation and financial position.

​

Additionally, our sourcing operations may also be hurt by health concerns regarding the outbreak of viruses, widespread illness, infectious diseases, contagions and the occurrence of unforeseen epidemics (including the outbreak of the coronavirus and its potential impact on our financial results) in countries in which our products are manufactured. Moreover, negative press or reports about internationally manufactured products may sway public opinion, and thus customer confidence, away from our products. Furthermore, changes in U.S. trade policies, including new restrictions, tariffs or other changes could lead to additional costs, delays in shipments, embargos and other uncertainties that could negatively impact our relationships with our international suppliers and materially adversely affect our business. We experienced delays in the receipt of certain goods and the supply of our products from international and domestic shipping origins as a result of the COVID-19 pandemic and more general global supply chain constraints in fiscal 2021. Depending on the continued extent and duration of these constraints and disruptions, our supply chain, results of operations (including sales) or future business may be materially and adversely impacted. These and other issues affecting our international suppliers or internationally manufactured merchandise could have a material adverse effect on our business, results of operations and financial condition.

​

Disruptions in our manufacturing facilities or arrangements could cause our revenues and operating results to decline.

​

We currently manufacture the majority of our products in Shenzhen, China. This facility is vulnerable to damage from earthquakes, floods, fires, power loss and similar events. It could also be subject to break-ins, sabotage and intentional acts of vandalism. Our insurance may not cover such events and, if the event is covered, our insurance may not be sufficient to compensate us for any losses that may occur. Despite any precautions we may take, the occurrence of a natural disaster or other unanticipated problem at our manufacturing facility could result in delayed shipment of products, missed delivery deadlines and harm to our reputation, which may

11

Table of Contents

cause our revenues and operating results to decline. Performance, reliability or quality problems with our products may cause our customers to reduce or cancel orders which would harm our operating results.

​

We regularly introduce new products with new technologies or manufacturing processes. Our products have in the past contained, and may in the future contain, errors or defects that may be detected at any point in the life of the product. Detection of such errors could result in delays in shipping and sales during the period required to correct such errors.

​

Defects may also result in product returns, loss of sales and cancelled orders, delays in market acceptance, injury to our reputation, injury to customer relationships and increased warranty costs, which could have an adverse effect on our business, operating results and financial condition.

​

In addition, events beyond our control, such as disruptions in operations due to natural or man-made disasters, inclement weather conditions, accidents, system failures, power outages, political instability (for example, the current conflict between Russia and Ukraine), physical or cyber break-ins, server failure, work stoppages, slowdowns or strikes by employees, acts of terrorism, the outbreak of viruses, widespread illness, infectious diseases, contagions and the occurrence of unforeseen epidemics (including the outbreak of the coronavirus and its potential impact on our financial results) and other unforeseen or catastrophic events, could damage our manufacturing facilities or our vendors’ fulfillment centers or render them inoperable, making it difficult or impossible for us or our vendors to process customer orders for an extended period of time. For example, in March 2022, China imposed a multi-day lockdown in the city of Shenzhen due to a rise in the number of coronavirus cases, which required factories to close and disrupted our manufacturing operations in that city. The war between Russia and Ukraine and the resulting political uncertainty also could result in an increase in cyberattacks that could either directly or indirectly impact our operations. Such events may also result in delays in our or our vendors’ receipt of inventory and the delivery of merchandise between our customers, our stores and/or our partners and our distribution center and our vendors’ fulfillment centers. We or our vendors could also incur significantly higher costs and longer lead times associated with distributing inventory during the time it takes for us or our vendors to reopen or replace our distribution center or any of their fulfillment centers.

​

We cannot guarantee that our HMI solutions for new markets will be successful or that we will be able to continue to generate significant revenue from these markets.

​

Our HMI solutions may not be successful in new markets despite the fact that these product solutions are capable of enabling people to interact more easily and intuitively with a wide variety of electronic devices. Various target markets for our interface solutions may develop slower than anticipated or could utilize competing technologies. The markets for certain of these products depend in part upon the continued development and deployment of wireless and other technologies, which may or may not address the needs of the users of these products.

​

Our ability to generate significant revenue from new markets will depend on various factors, including the following:

​

​

​

​

​

The failure of any of these target markets to develop as we expect, or our failure to serve these markets to a significant extent, will impede our sales growth and could result in substantially reduced earnings. We cannot predict the size or growth rate of these markets or the market share we will achieve or maintain in these markets in the future.

​

If we fail to maintain and build relationships with our customers, or if our customers’ products which utilize our HMI solutions do not gain widespread market acceptance, our revenue may stagnate or decline.

​

12

Table of Contents

We generally do not sell products to end-users. Instead, we sell component products that our customers incorporate into their products, and we depend on our customers to successfully manufacture and distribute products incorporating our component products and to generate consumer demand through their marketing and promotional activities. We do not control or influence the manufacture, promotion, distribution, or pricing of the products that incorporate our HMI solutions. As a result of this, our success depends almost entirely upon the widespread market acceptance of our customers’ products that incorporate our HMI solutions. Even if our technologies successfully meet our customers’ price and performance goals, our sales would decline or fail to develop if our customers do not achieve commercial success in selling their products that incorporate our HMI solutions.

​

Our customers generally do not provide us with firm, long-term volume purchase commitments, opting instead to issue purchase orders that they can cancel, reduce, or delay at any time. In order to meet the expectations of our customers, we must provide innovative HMI solutions on a timely and cost-effective basis. This requires us to match our design and production capacity with customer demand, maintain satisfactory delivery schedules, and meet performance goals. If we are unable to achieve these goals for any reason, our sales may decline or fail to develop, which would result in decreasing revenue.

​

If we are not able to protect our intellectual property or if we infringe on the intellectual property of others, our business and operating results could be adversely affected.

​

We consider our intellectual property to be a key element of our ability to compete in our chosen markets. We rely on a combination of patents, trade secrets and proprietary software to establish and protect our intellectual property rights. There is no assurance that patents will be issued from any of our pending applications or that any claims allowed from existing or pending patents will be sufficiently broad to protect our technology. We also cannot assure that any patents issued to us will not be challenged, invalidated or circumvented, or that the rights granted will provide proprietary protection. Litigation may be necessary to enforce our patents, trade secrets and other intellectual property rights, to determine the validity and scope of the proprietary rights of others or to defend against claims of infringement. Such litigation could result in substantial costs and diversion of resources and could have a material adverse effect on our business, regardless of the final outcome of the litigation.

​

Despite our efforts to maintain and safeguard our proprietary rights, there are no assurances that we will be successful in doing so or that our competitors will not independently develop or patent technologies that are substantially equivalent or superior to our technologies. If any of the holders of these patents assert claims that we are infringing them, we could be forced to incur substantial litigation expenses, and if we were found to be infringing on someone else’s patent, we could be required to pay substantial damages, pay royalties in the future or be enjoined from infringing in the future.

​

Our success depends in part on our CEO and CFO, who simultaneously lead other public corporations.

​

Steven N. Bronson, our Chairman of the Board, President and Chief Executive Officer, and Ryan J. Hoffman, our Chief Financial Officer, simultaneously serve as officers and, in the case of Mr. Bronson, a director, of Qualstar Corporation (OTCMKTS: QBAK) and BKF Capital Group, Inc. (OTCMKTS: BKFG). Mr. Bronson serves as President and Chief Executive Officer and as a director of Qualstar Corporation and as Chairman of the Board and Chief Executive Officer for BKF Capital Group, Inc., and Mr. Hoffman serves as Chief Financial Officer of each of Qualstar Corporation and BKF Capital Group, Inc.

​

As a result, each of Messrs. Bronson and Hoffman divides his time among these companies and does not devote his full business time and attention to Interlink’s business. Each of Messrs. Bronson and Hoffman currently works an equivalent full-time schedule for Interlink; however, there can be no assurance that the amount of time these officers devote to our company will not diminish from time to time for limited or extended periods as their other business obligations require a greater portion of their attention. Neither Mr. Bronson nor Mr. Hoffman is required to spend a minimum amount of time on Interlink business. Our continued success depends in part upon the availability and performance of these officers, particularly Mr. Bronson, who possesses unique and extensive industry knowledge and experience as well as a deep understanding of our business and strategy. A reduction in their services to Interlink from current levels due to obligations to Qualstar Corporation, BKF Capital Group, Inc. or other organizations with which these officers are affiliated could have a disruptive effect, adversely impacting our ability to manage our business effectively and execute our business strategy.

​

13

Table of Contents

Risks Related to Our Industry

​

If we are unable to keep pace with rapid technological change and gain market acceptance of new products, we may not be able to compete effectively.

​

Technology, both in our markets and in our customers’ markets, is undergoing rapid change. In order to maintain our leadership position in our existing markets and to emerge as a leader in new markets, we will have to maintain a leadership position in the technologies supporting those markets. Doing so will require, among other things, that we accomplish the following:

​

​

​

​

​

There is no assurance that we will be able to achieve any of these objectives.

​

Our markets are intensely competitive and many of our potential competitors have resources that we lack.

​

Our markets are competitive, and we expect competition in our newer markets to increase. Our competitors include companies with similar products or technologies, companies that sell complementary products to our target markets and our customers themselves, who could choose to manufacture products that they currently buy from us. Our competitors and potential competitors may have established business relationships that afford them a competitive advantage or may create technologies that are superior to ours or that set a new industry standard that will define the successful product for that market. If any of our competitors establish a close working relationship with our customers, they may obtain advance knowledge of our customers’ technology choices or may be afforded an opportunity to work in partnership to develop compatible technologies and may therefore achieve a competitive advantage. We may be unable to compete successfully against our current and future competitors.

​

We face risks associated with security breaches or cyber-attacks.

​

We face risks associated with security breaches or cyber-attacks of our computer systems or those of our third-party representatives, vendors, and service providers. The war between Russia and Ukraine and the resulting political uncertainty could result in an increase in cyberattacks that could either directly or indirectly impact our operations. Although we have implemented security procedures and controls to address these threats, our systems may still be vulnerable to data theft, computer viruses, programming errors, attacks by third parties, or similar disruptive problems. If our systems, or systems owned by third parties affiliated with our company, were breached or attacked, the proprietary and confidential information of our company and our customers could be disclosed and we may be required to incur substantial costs and liabilities, including the following:

​

​

​

​

​

14

Table of Contents

​

​

​

​

In addition, any compromise of security from a security breach or cyber-attack could deter customers or business partners from entering into transactions that involve providing confidential information to us. As a result, any compromise to the security of our systems could have a material adverse effect on our business, reputation, financial condition, and operating results.

​

Risks Relating to Ownership of Our Stock

​

There is a limited or no public market for our securities.

​

Our common stock is quoted on The Nasdaq Capital Market, where the daily trading volume has been limited. This is due in part to the significant percentage (approximately 83% as of December 31, 2021) of our shares that are held by officers and directors and their affiliates.

​

We cannot predict the extent to which investor interest in our Company will lead to the development of an active trading market or how liquid that market might become. The lack of an active market may reduce the value of shares of our common stock and impair the ability of our stockholders to sell their shares at the time or price at which they wish to sell them. An inactive market may also impair our ability to raise capital by selling our common stock and may impair our ability to acquire or invest in other companies, products, or technologies by using our common stock as consideration.

​

The price of our common stock may be volatile, and the value of a stockholder’s investment could decline.

​

Technology stocks have historically experienced high levels of volatility. The trading price of our common stock may fluctuate substantially, depending on many factors, some of which are beyond our control and may not be related to our operating performance. These fluctuations could cause investors to lose all or part of their investment in our common stock. Factors that could cause fluctuations in the trading price of our common stock include the following:

​

​

​

​

​

​

​

​

​

​

​

15

Table of Contents

​

​

​

​

​

In addition, if the market for technology stocks or the stock market, in general, experience a loss of investor confidence, the trading price of our common stock could decline for reasons unrelated to our business, results of operations or financial condition. The trading price of our common stock might also decline in reaction to events that affect other companies in our industry even if these events do not directly affect us. In the past, following periods of volatility in the market price of a company’s securities, securities class action litigation has often been brought against that company. If our stock price is volatile, we may become the target of securities litigation. Securities litigation could result in substantial costs and divert our management’s attention and resources from our business. This could have a material adverse effect on our business, results of operations and financial condition.

​

The liquidation preference of the shares of our Series A Convertible Preferred Stock would reduce the amount available to our common stockholders in the event of our liquidation or winding up.

​

Holders of our Series A Convertible Preferred Stock have a liquidation preference equal to the greater of $25.00 per share plus any accrued and unpaid dividends, and such amount per share as would have been payable had all shares of Series A Convertible Preferred Stock been converted into our common stock in the event of our liquidation or winding up. This means that those holders are entitled to receive the liquidation preference before any payment or other distribution of assets to our common stockholders, and the amount of any such payment or other distribution will be reduced by that amount.

​

The issuance of shares of common stock upon conversion of the Series A Convertible Preferred Stock may cause immediate and substantial dilution to our existing stockholders.

​

Our Series A Convertible Preferred Stock is presently convertible into 400,000 shares of common stock. The issuance of shares of common stock upon conversion of shares of our Series A Convertible Preferred Stock will result in dilution to the interests of other common stockholders.

​

Certain provisions in our Series A Convertible Preferred Stock may impact our ability to obtain additional financing in the future.

​

In addition to cash flows generated from operations, we may need to raise capital in the future through the issuance of capital stock. In order to issue any class of capital stock or series of preferred stock the terms of which expressly provide that such class or series will rank on parity with or senior to the Series A Convertible Preferred Stock upon our liquidation, winding-up or dissolution, we must obtain the affirmative consent of holders of a majority of the then-outstanding shares of our Series A Convertible Preferred Stock. If we are unable to obtain the consent of these stockholders in connection with future financings, we would be unable to issue capital stock that is on parity with or senior to the Series A Convertible Preferred Stock, which may prevent us from raising additional capital on acceptable terms, or at all.

​

If securities or industry analysts do not publish research or reports about our business, or publish inaccurate or unfavorable research reports about our business, our share price and trading volume could decline.

​

The trading market for our common stock, to some extent, depends on the research and reports that securities or industry analysts publish about us or our business. We do not have any control over these analysts. If one or more of the analysts who cover us should downgrade our shares or change their opinion of our business prospects, our share price would likely decline. If one or more of these analysts ceases coverage of our company or fails to regularly publish reports on us, we could lose visibility in the financial markets, which could cause our share price or trading volume to decline.

​

16

Table of Contents

Raising additional capital may cause dilution to our existing stockholders, restrict our operations or require us to relinquish rights to our product candidates on unfavorable terms to us.

​

We may seek additional capital through a variety of means, including through private and public equity offerings and debt financings. To the extent that we raise additional capital through the sale of equity or convertible debt securities, ownership interest will be diluted, and the terms may include liquidation or other preferences that adversely affect stockholder rights. Debt financing, if available, may involve agreements that include covenants limiting or restricting our ability to take certain actions, such as incurring additional debt, making capital expenditures or declaring dividends. If we raise additional funds from third parties, we may have to relinquish valuable rights to our technologies or product candidates, or grant licenses on terms that are not favorable to us. If we are unable to raise additional funds through equity or debt financing when needed, we may be required to delay, limit, reduce or terminate our product development or commercialization efforts for our product candidates, or we may need to grant to others the rights to develop and market product candidates that we would otherwise prefer to develop and market ourselves.

​

Our CEO has control over key decision making as a result of his control of a majority of our voting stock.

​

Steven N. Bronson, our Chairman of the Board, President and Chief Executive Officer, beneficially owns approximately 82.5% of the outstanding shares of our common stock as of December 31, 2021. As a result, Mr. Bronson has the ability to control the outcome of matters submitted to our stockholders for approval, including the election of directors and any merger, consolidation, or sale of all or substantially all of our assets. In addition, Mr. Bronson has the ability to control the management and affairs of our company as a result of his position as our CEO and his ability to control the election of our directors. As a board member and officer, Mr. Bronson owes a fiduciary duty to our stockholders and must act in good faith in a manner he reasonably believes to be in the best interests of our stockholders. As a stockholder, Mr. Bronson may have interests that differ from yours and he may vote in a manner that is adverse to your interests. This concentration of ownership may have the effect of deterring, delaying or preventing a change of control of our company, could deprive our stockholders of an opportunity to receive a premium for their common stock as part of a sale of our company and might ultimately affect the market price of our common stock.

​

We do not intend to pay dividends on our common stock for the foreseeable future and, consequently, our common stockholders’ ability to achieve a return on their investment will depend on appreciation in the price of our common stock.

​

We have never declared or paid cash dividends on our common stock, and we do not anticipate paying any dividends on our common stock in the foreseeable future, if at all. The declaration, amount and payment of any future dividends on shares of our common stock, if any, is subject to the designations, rights and preferences of the Series A Convertible Preferred Stock and will be at the sole discretion of our board of directors, which may take into account general and economic conditions, our financial condition and results of operations, our available cash and current and anticipated cash needs, capital requirements, contractual, legal, tax and regulatory restrictions, the implications of the payment of dividends by us to our stockholders or by our subsidiaries to us, and any other factors that our board of directors may deem relevant. As a result, stockholders may only receive a return on their investment in our common stock if the market price of our common stock increases.

​

Our charter documents and Nevada law could discourage takeover attempts and lead to management entrenchment.

​

Our articles of incorporation and bylaws contain provisions that could delay or prevent a change in control of our company. These provisions could also make it difficult for stockholders to take other corporate actions, including effecting changes in our management. These provisions include:

​

​

​

17

Table of Contents

​

​

We also are subject to provisions of Nevada law found in Nevada Revised Statutes, Sections 78.411 to 78.444, inclusive, that prohibit us from engaging in any business combination with any “interested stockholder,” meaning generally that a stockholder who beneficially owns 10 percent (10%) or more of our stock, cannot acquire us for a period of time after the date this person became an interested stockholder, unless various conditions are met, such as approval of the transaction by our board of directors and stockholders.

​

Risks Related to Government Regulation

​

Our failure to comply with U.S. laws and regulations relating to the export and import of goods, technology, and software could subject us to penalties and other sanctions and restrict our ability to license and develop our circuit designs.

​

We are obligated by law to comply with all U.S. laws and regulations governing the export and import of goods, technology, and services, including the International Traffic in Arms Regulations (“ITAR”), the Export Administration Regulations (“EAR”), regulations administered by the Department of Treasury’s Office of Foreign Assets Control, and regulations administered by the Bureau of Alcohol Tobacco Firearms and Explosives governing the importation of items on the U.S. Munitions Import List. Pursuant to these regulations, we are responsible for determining the proper licensing jurisdiction and export classification of our products, and obtaining all necessary licenses or other approvals, if required, for exports and imports of technical data, and software, or for the provision of technical assistance or other defense services to or on behalf of foreign persons. We are also required to obtain export licenses, if required, before employing or otherwise utilizing foreign persons in the performance of our contracts if the foreign person will have access to export-controlled technical data or software. The violation of any of the applicable laws and regulations could subject us to administrative, civil, and criminal penalties.

​

These regulations could restrict our ability to sell products and develop new products. Changes in our products or changes in export and import regulations may create delays in the introduction of our products in international markets, prevent our customers with international operations from deploying products incorporating our products throughout their global systems or, in some cases, prevent the export or import of products that include our products to certain countries altogether. Any change in export or import regulations or related legislation, shift in approach to the enforcement or scope of existing regulations, or change in the countries, persons, or technologies targeted by such regulations, could result in decreased use of our products by, or our ability to export or license our products to, existing or potential customers with international operations and decreased revenue. Additionally, failure to comply with these laws could result in sanctions by the U.S. government, including substantial monetary penalties, denial of export privileges, and debarment from government contracts.

​

If we fail to comply with anti-bribery laws, including the U.S. Foreign Corrupt Practices Act (“FCPA”), we could be subject to civil and/or criminal penalties.

​

As a result of our international operations, we may be subject to anti-bribery laws, including the FCPA, which prohibits companies from making improper payments to foreign officials for the purpose of obtaining or keeping business. If we fail to comply with these laws, the U.S. Department of Justice, the SEC, or other U.S. or foreign governmental authorities could seek civil and/or criminal sanctions, including monetary fines and penalties against us or our employees, as well as additional changes to our business practices and compliance programs, which could have a material adverse effect on our business, results of operations, or financial condition.

​

We cannot provide any assurance that current environmental laws and product quality specification standards, or any laws or standards enacted in the future, will not have a material adverse effect on our business.

​

Our operations are subject to environmental and various other regulations in each of the jurisdictions in which we conduct business. Regulations have been enacted in certain jurisdictions which impose restrictions on waste disposal of electronic products and

18

Table of Contents

electronics recycling obligations. If we fail to comply with applicable rules and regulations in connection with the use and disposal of such substances or other environmental or recycling legislation, we could be subject to significant liability or loss of future sales.

​

General Risks

​

The ongoing, global coronavirus pandemic has significantly and adversely affected, and may continue to adversely affect, our business, financial position, results of operations, and cash flows.

​

The outbreak of the novel coronavirus (which causes the disease now known as COVID-19) was first identified in December 2019 in Wuhan, China, and has since spread rapidly across the world, including in all or most of the countries in which we, our clients, and our suppliers operate. The COVID-19 pandemic has caused, and is expected to continue to cause, a global slowdown in economic activity, a decrease in demand for a broad variety of goods and services, disruptions in global supply chains, and significant volatility and disruption of financial markets. Because the severity, magnitude and duration of the pandemic and its economic consequences are uncertain, vary by region, are rapidly changing and difficult to predict, its full impact on our operations and financial performance, as well as its impact on our near-term ability to successfully execute our strategic objectives, remains similarly uncertain and difficult to predict. Further, the pandemic’s ultimate impact depends in part on many factors not within our control and which may vary by region (heightening the uncertainty as to the ultimate impact COVID-19 may have on our operations and financial performance), including, without limitation: restrictive governmental and business actions that have been and continue to be taken in response (including travel restrictions, work from home requirements, and other workforce limitations); economic stimulus, funding and relief programs and other governmental economic responses; the effectiveness of governmental actions; economic uncertainty in key global markets and financial market volatility; levels of economic contraction or growth; the impact of the pandemic on health and safety; the pace of recovery if and when the pandemic subsides; and how significantly the number of cases increases as economies begin to open and restrictive governmental and business actions are relaxed.

​

Further, the COVID-19 pandemic has recently subjected our operations and financial performance to several risks, including those discussed below:

​

​

​

​

The full extent of the effect of the pandemic on us, our customers, our supply chain and our business will depend on future developments, which are highly uncertain and cannot be predicted with confidence, including the duration and severity of the outbreak or subsequent outbreaks. We may continue to experience the effects of the pandemic even after it has waned, and our business, results of operations and financial condition could continue to be affected. In particular, if COVID-19 continues to spread or re-emerges, particularly in the United States, Singapore and China where our operations are most concentrated, resulting in a prolonged period of travel, commercial, social and other similar restrictions, we could experience, among other things:

​

19

Table of Contents

​

​

​

​

​

​

​

​

​

The COVID-19 pandemic may also affect our operations and financial results in a manner that is not presently known to us or that we currently do not expect to present significant risks to our operations or financial results.

​

If we fail to manage change successfully, our operations could be adversely impacted and our business could be impaired.

​

The ability to operate our business in rapidly evolving markets requires an effective planning and management process. We expect that responding to changes in our business will place a significant strain on our personnel, management systems, infrastructure and other resources. Our ability to manage change effectively will require us to attract, train, motivate and manage new employees, to reallocate human and other resources to support new undertakings and to restructure our operations to manage a restructured business effectively. If we are unable to respond effectively to change, our operations could be adversely affected and our business could be impaired.

​

International sales and manufacturing risks could adversely affect our operating results.

​

Our revenue from international sales represents a substantial portion of our overall sales, and this trend will continue for the foreseeable future. The majority of our manufacturing is currently performed in China. Our international operations involve a number of risks, including with respect to:

​

20

Table of Contents

Any of the above factors could adversely affect our operating results.

​

We expect to make acquisitions, which could involve certain risks and uncertainties.

​

We expect to make acquisitions in the future. Acquisitions involve numerous inherent challenges, such as properly evaluating acquisition opportunities, properly evaluating risks and other diligence matters, ensuring adequate capital availability and balancing other resource constraints. There are risks and uncertainties related to acquisitions, including: difficulties integrating acquired technology, operations, personnel and financial and other systems; unrealized sales expectations from the acquired business; unrealized synergies and cost savings; unknown or underestimated liabilities; diversion of management attention from running our existing businesses and potential loss of key management employees of the acquired business. In addition, internal controls over financial reporting of acquired companies may not be up to required standards. Our integration activities may place substantial demands on our management, operational resources and financial and internal control systems. Customer dissatisfaction or performance problems with an acquired business, technology, service or product could also have a material adverse effect on our reputation and business.

​

Our ability to operate effectively could be impaired if we were to lose the services of key personnel, or if we are unable to recruit qualified managers and key personnel in the future.

​

Our success is substantially dependent on the continued availability of our key management and technical personnel. Several of our key management personnel have been with us throughout most of our history and have substantial experience with our business and technology. If one or more of our key management personnel leaves Interlink and we are unable to find a replacement with the combination of skills and attributes necessary to execute our business plan, it may have an adverse impact on our business. Our success will also depend, in part, on our ability to attract and retain additional qualified professional, technical, production, managerial and marketing personnel, both domestically and internationally.

​

We are required to evaluate our internal control over financial reporting under Section 404 of the Sarbanes-Oxley Act of 2002, and any adverse results from such evaluation could result in a loss of investor confidence in our financial reports and have an adverse effect on our stock price.

​

Pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, we are required to furnish a report by our management on our internal control over financial reporting. Such report contains, among other matters, an assessment of the effectiveness of our internal control over financial reporting as of the end of our fiscal year, including a statement as to whether or not our internal control over financial reporting is effective. This assessment must include disclosure of any material weaknesses in our internal control over financial reporting identified by management. If we are unable to assert that our internal control over financial reporting is effective, we could lose investor confidence in the accuracy and completeness of our financial reports, which could have an adverse effect on our stock price.

​

As a non-accelerated filer, we are required to evaluate and report on the effectiveness of our internal control over financial reporting. Our independent registered public accounting firm is not required to attest to the effectiveness of our internal control over financial reporting; however, our independent registered public accounting firm may communicate to us if they are not satisfied with the level

21

Table of Contents

at which our controls are documented, designed or operating. Our remediation efforts may not enable us to avoid a material weakness in the future.

​

The requirements of being a public company may strain our resources, divert our management’s attention and affect our ability to attract and retain qualified board members.

​

As a public company, we will be subject to the reporting requirements of the Exchange Act, and will be required to comply with the applicable requirements of the Sarbanes-Oxley Act and the Dodd-Frank Wall Street Reform and Consumer Protection Act, the listing requirements of the securities exchange on which our common stock is traded and other applicable securities rules and regulations. Compliance with these rules and regulations will increase our legal and financial compliance costs, make some activities more difficult, time-consuming or costly and increase demand on our systems and resources. Among other things, the Exchange Act requires that we file annual, quarterly and current reports with respect to our business and results of operations and maintain effective disclosure controls and procedures and internal controls over financial reporting. In order to maintain and improve our disclosure controls and procedures and internal controls over financial reporting to meet this standard, significant resources and management oversight is required. As a result, management’s attention may be diverted from other business concerns, which could harm our business and results of operations. We may need to hire additional employees to comply with these requirements, which will increase our costs and expenses.

​

In addition, being a public company subject to these rules and regulations make it more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced coverage or incur substantially higher costs to obtain coverage. These factors could also make it more difficult for us to attract and retain qualified executive officers and qualified members of our board of directors, particularly to serve on our audit committee and compensation committee.

​

ITEM 1B.    UNRESOLVED STAFF COMMENTS

None.

​

ITEM 2.    PROPERTIES

We maintain our principal office, totaling approximately 4,351 square feet, in Irvine, California, under a sub-lease that expires in May 2023. We also conduct engineering, assembly and prototyping capabilities in Camarillo, California, where we established a Global Product Development and Materials Science Center. We maintain additional leased spaces in several locations, including a production facility in Shenzhen, China, a satellite embedded electronics lab in Singapore, and regional offices in Hong Kong, Tokyo, and various other locations in the United States. In total, we lease approximately 23,000 square feet, and do not own any real estate. We believe that our facilities are adequate to meet our needs for the immediate future, and that, should it be needed, we will be able to secure additional space to accommodate any expansion of our operations.

​

ITEM 3.    LEGAL PROCEEDINGS

We are not party to any material legal proceedings. We may, from time to time, be party to litigation and subject to claims incident to the ordinary course of business. As our growth continues, we may become party to an increasing number of litigation matters and claims. The outcome of litigation and claims cannot be predicted with certainty, and the resolution of any future matters could materially affect our future financial position, results of operations or cash flows.

​

ITEM 4.    MINE SAFETY DISCLOSURES

Not applicable.

​

22

Table of Contents

​

PART II

ITEM 5.    MARKET FOR REGISTRANTS’ COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

​

Market Information for Common Stock

Our common stock is listed on The Nasdaq Capital Market under the symbol “LINK.”

​

Holders of Record

As of December 31, 2021, we had 26 holders of record of our common stock. The actual number of stockholders is greater than this number of record holders and includes stockholders who are beneficial owners but whose shares are held in street name by brokers and other nominees.

Dividend Policy

Common Stock

We have never declared or paid cash dividends on our common stock, and we do not anticipate paying any dividends on our common stock in the foreseeable future, if at all. The declaration, amount and payment of any future dividends on shares of our common stock, if any, is subject to the designations, rights and preferences of the Series A Convertible Preferred Stock and will be at the sole discretion of our board of directors, which may take into account general and economic conditions, our financial condition and results of operations, our available cash and current and anticipated cash needs, capital requirements, contractual, legal, tax and regulatory restrictions, the implications of the payment of dividends by us to our stockholders or by our subsidiaries to us, and any other factors that our board of directors may deem relevant.

​

Series A Convertible Preferred Stock

We have 200,000 shares of our Series A Convertible Preferred Stock outstanding, each of which currently is convertible into two shares of our common stock. The designations, rights and preferences of our Series A Convertible Preferred Stock provide that we will pay, when, as and if declared by our board of directors, monthly cumulative cash dividends at an annual rate of 8.0%, which is equivalent to $0.16667 per month and $2.00 per annum per share, based on the $25.00 liquidation preference. Dividends on the Series A Convertible Preferred Stock will accrue daily and be cumulative from, and including, the first day of the calendar month in which the shares are issued and will be payable monthly in arrears on the 15th day of each calendar month. Our board of directors commenced paying dividends on our Series A Convertible Preferred Stock in November 2021, and we expect that our board of directors will continue to declare and pay monthly cash dividends on our Series A Convertible Preferred Stock, subject to the limitations to do so under Nevada law.

​

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

None.

​

Recent Sales of Unregistered Securities

None.

​

ITEM 6.    RESERVED

​

23

Table of Contents

ITEM 7.    MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

​

You should read the following discussion and analysis of our financial condition and results of operations in conjunction with the consolidated financial statements and the related notes to the consolidated financial statements included later in this Annual Report on Form 10-K. In addition to historical financial information, the following discussion contains forward-looking statements that reflect our plans, estimates, beliefs and expectations that involve risks and uncertainties. Our actual results and the timing of events could differ materially from those discussed in these forward-looking statements. Factors that could cause or contribute to these differences include those discussed below and elsewhere in this Annual Report on Form 10-K, particularly in “Risk Factors” and “Special Note Regarding Forward-Looking Statements.”

​

Overview

​

Interlink Electronics, Inc. designs, develops, manufactures and sells a range of force-sensing technologies that incorporate our proprietary materials technology, firmware and software into a portfolio of standard products and custom solutions. These include sensor components, subassemblies, modules and products that support effective, efficient cursor control and novel three-dimensional user inputs. Our HMI technology platforms are deployed in a wide range of markets including consumer electronics, automotive, industrial, and medical. The application of our HMI technology platforms includes vehicle entry, vehicle multi-media control interface, rugged touch controls, presence detection, collision detection, speed and torque controls, pressure mapping, biological monitoring and others.

​

Interlink has been a leader in the printed electronics industry for 35 years with the commercialization of our patented FSR® technology that has enabled rugged and reliable HMI solutions. Our solutions have focused on handheld user input, menu navigation, cursor control, and other intuitive interface technologies for the world’s top electronics manufacturers.

​

We sell our products globally to a diverse array of customers that include the Fortune 500 as well as start-ups, design houses, original design manufacturers, OEMs and universities. Our technology has been deployed in the consumer electronics, industrial automation, automotive and medical markets. Our global presence in the United States, China, Hong Kong, Singapore and Japan, allows us to provide local sales and engineering support services to our existing and future customers. Our products are manufactured by our wholly-owned subsidiary in a state-of-the-art facility in Shenzhen, China. We control 100% of the manufacturing and shipping process which enables us to respond quickly to customer product demand and design requirements.

​

We have invested significantly in the expansion of our technology platforms through our own internal development to ensure we provide the market with leading-edge HMI solutions that are seamless to deploy and perform flawlessly. We spent several years building a research and development (R&D) organization in Singapore to develop new product offerings that will meet the market’s growing demand for touch technology and smart surfaces. We have now shifted a majority of R&D and product development efforts to Camarillo, California, where we established a Global Product Development and Materials Science Center. We believe this increased presence in the U.S. will allow us to grow our business and be more closely aligned with current and future large-tier customers. We also expect to launch an engineering, research and development center in the United Kingdom in 2022. We also plan to explore potential strategic relationships with companies and technology institutes that will support our growth initiatives.

​

24

Table of Contents

Results of Operations

The following table sets forth certain consolidated statements of operations data for the periods indicated. The percentages in the tables are based on net revenues.

​

​

Comparison of the Years Ended December 31, 2021 and 2020

Revenue, net by the markets we serve is as follows:

​

​

We sell our custom products into the industrial, medical, consumer, and automotive markets. We sell our standard products through various distribution networks. The ultimate customer for standard products may come from different markets which are often unknown to us at the time of sale. Each market has different product design cycles. Products with longer design cycles often have much longer product life-cycles. Industrial and medical products generally have longer design and life-cycles than consumer products. We currently have products with life-cycles that have exceeded twenty years and are ongoing.

​

Revenues were up in 2021 compared to 2020 in the industrial and consumer markets, and were generally flat in the medical market, and for our standard products. The increase in revenue from our industrial market customers is due to increased purchasing volume by these customers for use in their ongoing product lines resulting from changes in demand by their customers. In all markets, the timing

25

Table of Contents

of orders from our customers is not always predictable and can be concentrated in varying periods during the year to coincide with their project and building plans.

​

​

Our gross profit and gross margin are impacted by various factors including product mix, customer mix, volume, material costs, manufacturing efficiencies, facilities costs, compensation costs and provisions for excess and obsolete inventories. Although gross profit increased consistent with the increase in revenues, gross margin declined slightly due to changes in product and customer mix.

​

​

Engineering and R&D expenses consist primarily of compensation expenses for employees engaged in research, design and development activities, and the cost of those employees’ indirect supplies and allocation of facilities expenses. Our R&D team focuses both on internal design development in order to develop our HMI solutions, as well as design development aimed at addressing our customers’ unique design challenges.

​

Our engineering and R&D costs were down slightly when compared with the prior year. While headcount and related costs increased in both our Camarillo, California lab and our Singapore R&D center in 2021, our engineering and R&D costs were down on a year-over-year basis because of receipt of a research incentive grant from the Singapore government that reduced expenses for 2021.

​

​

Selling, general and administrative expenses consist primarily of compensation expenses, legal and other professional fees, facilities expenses and communication expenses. Selling, general and administrative expenses increased as compared with the prior year driven by an increase in headcount and compensation for sales, marketing, finance and administrative personnel, and an increase in legal and other professional fees.

​

​

Tax expense (benefit) reflects statutory tax rates in the jurisdictions in which we operate adjusted for permanent book/tax differences. For 2021, the Company recorded an income tax provision comprised substantially of valuation allowance against domestic deferred tax assets due to recent history of U.S. taxable losses. For 2020, the Company recorded an income tax benefit for net losses in the U.S. that can be carried back for a refund of prior year taxes that were paid at higher U.S. tax rates and carried forward to offset future taxable income.

​

Our effective tax rate is directly affected by the relative proportions of revenue and income before taxes in the jurisdictions in which we operate. Based on the expected mix of domestic and foreign earnings, we anticipate our effective tax rate to remain similar to the

26

Table of Contents

newly stated U.S. statutory rate of 21% primarily due to a significant portion of our earnings originating in the higher rate China jurisdiction (25%), offset by lower rate jurisdictions in Singapore (17%) and Hong Kong (16.5%). State income taxes also have an impact in the U.S.

​

Discrete tax events may cause our effective rate to fluctuate on a quarterly basis. Certain events, including, for example, acquisitions and other business changes, which are difficult to predict, may also cause our effective tax rate to fluctuate. We are subject to changing tax laws, regulations, and interpretations in multiple jurisdictions. Corporate tax reform continues to be a priority in the U.S. and other jurisdictions. Additional changes to the tax system in the U.S. could have significant effects, positive and negative, on our effective tax rate, and on our deferred tax assets and liabilities.

​

Liquidity and Capital Resources

Cash requirements for working capital and capital expenditures have been funded from cash balances on hand, cash generated from operations and sales of equity securities. As of December 31, 2021, we had cash and cash equivalents of $10.8 million, working capital of $12.0 million and no indebtedness. Cash and cash equivalents consist of cash and money market funds. We did not have any short-term or long-term investments as of December 31, 2021. Of the $10.8 million of cash balances on hand, $2.4 million was held by foreign subsidiaries. If these funds are needed for our operations in the U.S., we have several methods to repatriate the funds without significant tax effects, including repayment of intercompany loans or distributions of previously taxed income. Other distributions may require us to incur U.S. or foreign taxes to repatriate these funds. However, our intent is to permanently reinvest these funds outside the U.S. and our current plans do not demonstrate a need to repatriate cash to fund our U.S. operations.

​

In April 2020, the Company received a loan in the aggregate principal amount of $186 thousand pursuant to the Paycheck Protection Program (the “PPP”) under the Coronavirus Aid, Relief, and Economic Security Act (the “CARES Act”). The loan was evidenced by a promissory note, dated April 21, 2020, issued by us to the lender, which was to mature on April 20, 2022, and bore interest at a rate of 1.00% per annum, payable monthly following an initial deferral period as specified under the PPP. Proceeds from the loan were used to fund designated expenses, including certain payroll costs, group health care benefits and other permitted expenses, in accordance with the PPP. The full amount of the loan principal and interest was forgiven in February 2021.

​

During the fourth quarter of 2021, we sold 200,000 shares of our 8.0% Series A Convertible Preferred Stock at a price of $25.00 per share for gross proceeds to us of $5.0 million before placement agent fees and transaction expenses. Each share of Series A Preferred Stock is convertible into two shares of our common stock. The designations, rights and preferences of our Series A Convertible Preferred Stock provide that we will pay, when, as and if declared by our board of directors, monthly cumulative cash dividends at an annual rate of 8.0%, which is equivalent to $0.16667 per month and $2.00 per annum per share, based on the $25.00 liquidation preference. Dividends on the Series A Convertible Preferred Stock will accrue daily and be cumulative from, and including, the first day of the calendar month in which the shares are issued and will be payable monthly in arrears on the 15th day of each calendar month. Our board of directors commenced paying dividends on our Series A Convertible Preferred Stock in November 2021, and we expect that our board of directors will continue to declare and pay monthly cash dividends on our Series A Convertible Preferred Stock, subject to the limitations to do so under Nevada law.

​

We believe that our existing cash and cash equivalents balance will be sufficient to maintain our current operations considering our current financial condition, obligations, and other expected cash flows. If our circumstances change, however, we may require additional cash. If we require additional cash, we may attempt to raise additional capital through equity, equity-linked or debt financing arrangements. If we raise additional funds by issuing equity or equity-linked securities, the ownership of our existing stockholders will be diluted. If we raise additional financing by the incurrence of indebtedness, we could be subject to fixed payment obligations and could also be subject to restrictive covenants, such as limitations on our ability to incur additional debt, and other operating restrictions that could adversely impact our ability to conduct our business. If we are unable to raise additional needed funds, we may also take measures to reduce expenses to offset any shortfall.

​

27

Table of Contents

Cash Flow Analysis

Our cash flows from operating, investing and financing activities are summarized as follows:

​

​

Net Cash Provided by Operating Activities

For the year ended December 31, 2021, the $231 thousand in net cash provided by operating activities was attributable to net loss of $(734) thousand, adjusted for non-cash charges of $819 thousand, non-cash gain on forgiveness of PPP loan of $186 thousand, and cash from changes in operating assets and liabilities of $332 thousand.

​

For the year ended December 31, 2020, the $39 thousand in net cash provided by operating activities was attributable to net income of $113 thousand, adjusted for non-cash charges of $237 thousand, and cash used in changes in operating assets and liabilities of $311 thousand.

​

Accounts receivable decreased slightly from $1,113 thousand at December 31, 2020 to $1,080 thousand at December 31, 2021 due to timing of shipments and cash collections during the fourth quarter of 2021 compared to the fourth quarter of 2020. Many of our customers pay promptly and accounts receivable is generally related to the most recent shipments. Inventories decreased from $866 thousand at December 31, 2020 to $814 thousand at December 31, 2021. Inventory balances fluctuate depending on the timing of materials purchases and product shipments. Prepaid expenses and other current assets were generally unchanged during the year. Accounts payable and accrued liabilities increased from $578 thousand at December 31, 2020 to $845 thousand at December 31, 2021 primarily due to the timing of payment for purchases of materials, compensation, and other services.

​

Net Cash Used in Investing Activities

Net cash used in investing activities of $159 thousand for the year ended December 31, 2021 consisted primarily of capital expenditures related to completion of the Global Product Development and Materials Science Center in our Camarillo footprint. Net cash used in investing activities of $90 thousand for the year ended December 31, 2020 consisted primarily of legal costs related to securing patents on new product development.

​

Net Cash Provided by Financing Activities

Net cash provided by financing activities of $4.5 million for the year ended December 31, 2021 was from our Series A Convertible Preferred Stock offering in which we raised gross offering proceeds of $5.0 million before reductions for selling commissions and costs. Net cash provided by financing activities of $186 thousand for the year ended December 31, 2020 related to our PPP loan.

​

Transactions with Related Parties

For a discussion of transactions with related parties, see Note 10, Related Party Transactions, of the notes to the consolidated financial statements, and Item 13, Certain Relationships and Related Transactions, and Director Independence, appearing elsewhere in this Annual Report on Form 10-K.

​

Off-Balance Sheet Arrangements

As of December 31, 2021 and 2020, we did not have any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. As such, we are not exposed to any financing, liquidity, market or credit risk that could arise if we had engaged in such relationships.

28

Table of Contents

Critical Accounting Policies and Estimates

We prepare our consolidated financial statements in accordance with generally accepted accounting principles in the United States (“GAAP”). The preparation of consolidated financial statements requires us to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenue, costs and expenses, and related disclosures. We evaluate our estimates and assumptions on an ongoing basis. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances. Actual results could differ significantly from the estimates made by our management. To the extent that there are differences between our estimates and actual results, our future financial statements presentation, financial condition, results of operations, and cash flows will be affected.

​

We believe that the assumptions and estimates associated with revenue recognition, inventory valuation, accounts receivable, stock-based compensation expense and income taxes have the greatest potential impact on our consolidated financial statements. Therefore, we consider these to be our critical accounting policies and estimates. For further information on all of our significant accounting policies, see the notes to our consolidated financial statements.

​

Revenue Recognition

In accordance with Accounting Standards Codification (“ASC”) Topic 606, Revenue from Contracts with Customers (“ASC 606”), we recognize revenues when promised goods or services are transferred to customers in an amount that reflects the consideration that is expected to be received for those goods or services. The guidance defines a five-step process to achieve this core principle and, in doing so, judgment and estimates may be required within the revenue recognition process including identifying performance obligations in the contract, estimating the amount of variable consideration to include in the transaction price and allocating the transaction price to each separate performance obligation. Generally, we recognize revenue when there is persuasive evidence that an arrangement exists, title and risk of loss have passed, delivery has occurred or the services have been rendered, the sales price is fixed or determinable and collection of the related receivable is reasonably assured. Title and risk of loss generally pass to our customers upon shipment. In limited circumstances where either title or risk of loss pass upon destination or acceptance or when collection is not reasonably assured, we defer revenue recognition until such events occur.

​

We input orders based upon receipt of a customer purchase order, confirm pricing through the customer purchase order, validate credit worthiness through past payment history or other financial data and record revenue upon shipment of goods and when risk of loss and title transfer. All customers have warranty rights, and some customers have explicit or implicit rights of return. We record reserves for potential customer returns and warranty rights.

​

Inventory Valuation

Inventories are stated at lower of cost or net realizable value (“NRV”). Inventory costs are determined using standard costs which approximate actual costs under the first-in, first-out method. We evaluate inventories for excess quantities and obsolescence. Our evaluation considers market and economic conditions, technology changes, new product introductions, and changes in strategic business direction, and requires estimates that may include elements that are uncertain. In order to state the inventory at lower of cost or NRV, we maintain reserves against individual stocking units. Inventory write-downs, once established, are not reversed until the related inventories have been sold or scrapped. If future demand or market conditions are less favorable than our projections, a write-down of inventory may be required, and would be reflected in cost of goods sold in the period the revision is made.

​

Accounts Receivable and Allowance for Credit Losses

Accounts receivable are recorded at the invoice amount and presented net of the allowance for credit losses. They do not bear interest. We evaluate the collectability of accounts receivable at each balance sheet date using a combination of factors, such as historical experience, credit quality, age of the accounts receivable balances, and economic conditions that may affect a customer’s ability to pay. We include any accounts receivable balances that are determined to be uncollectible in the overall allowance for credit losses using the specific identification method. After all attempts to collect a receivable have failed, the receivable is written off against the allowance.

​

29

Table of Contents

Stock-Based Compensation

We account for stock-based compensation under ASC Topic 718, Compensation-Stock Compensation, which requires us to record related compensation costs in the statement of operations. Calculating the fair value of stock-based compensation awards requires the input of highly subjective assumptions, including the expected life of the awards and expected volatility of our stock price. Expected volatility is a statistical measure of the amount by which a stock price is expected to fluctuate during a period. Our estimates of expected volatilities are based on weighted historical implied volatility. The expected forfeiture rate applied in calculating stock-based compensation cost is estimated using historical data and is updated annually.

​

The assumptions used in calculating the fair value of stock-based awards involve estimates that require management judgment. If factors change and we use different assumptions, our stock-based compensation expense could change significantly in the future. In addition, if our actual forfeiture rate is different from our estimate, our stock-based compensation expense could change significantly in the future.

​

Income Taxes

We account for income taxes using the asset and liability method in accordance with ASC Topic 740, Income Taxes, which requires recognition of deferred tax liabilities and assets for the expected future tax consequences of events that have been included in the financial statements or tax returns. Under this method, we must make estimates and judgments in determining the provision for taxes for financial statement purposes. These estimates and judgments occur in the calculation of tax credits, benefits, and deductions, and in the calculation of certain tax assets and liabilities that arise from differences in the timing of recognition of revenue and expense for tax and financial statement purposes, as well as the interest and penalties related to uncertain tax positions. In addition, the Company operates within multiple tax jurisdictions and is subject to audit in these jurisdictions. Significant changes in these estimates may result in an increase or decrease to our tax provision in a subsequent period. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date.

​

Our foreign subsidiaries are subject to foreign income taxes on earnings in their respective jurisdictions. Earnings of our foreign subsidiaries are generally included in our U.S. federal income tax return as they are earned.

​

We assess the likelihood that our deferred tax assets will be recovered from future taxable income and to the extent we believe that recovery is not determinable beyond a “more likely than not” standard, we establish a valuation allowance. To the extent we establish a valuation allowance or increase or decrease this allowance in a period, we include an expense or benefit within the tax provision in the statement of operations.

​

The calculation of our tax liabilities involves dealing with uncertainties in the application of complex tax regulations. We recognize liabilities for uncertain tax positions based on a two-step process. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained on audit, including resolution of related appeals or litigation processes, if any. If we determine that a tax position will more likely than not fail to be sustained on audit, the second step requires us to estimate and measure the tax benefit as the largest amount that is more than 50% likely to be realized upon ultimate settlement. It is inherently difficult and subjective to estimate such amounts, as we have to determine the probability of various hypothetical outcomes. We re-evaluate these uncertain tax positions on a quarterly basis. This evaluation is based on factors such as changes in facts or circumstances, changes in tax law, new audit activity, and effectively settled issues. Determining whether an uncertain tax position is effectively settled requires judgment. Such a change in recognition or measurement would result in the recognition of a tax benefit or an additional charge to the tax provision in the period in which a change in judgment occurs.

​

Recently Issued and Adopted Accounting Pronouncements

For a discussion of recently adopted accounting pronouncements, see Recently Issued Accounting Pronouncements in Note 1, The Company and its Significant Accounting Policies, of the notes to the consolidated financial statements appearing elsewhere in this Annual Report on Form 10-K.

​

30

Table of Contents

ITEM 7A.    QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Not applicable.

​

ITEM 8.    FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

​

31

Table of Contents

​

INTERLINK ELECTRONICS, INC.

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

​

​

​

​

32

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

Board of Directors and Shareholders
Interlink Electronics, Inc.

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheet of Interlink Electronics, Inc. (the Company) as of December 31, 2021, and the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for the year then ended, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2021, and the results of its operations and its cash flows for the year then ended in conformity with accounting principles generally accepted in the United States of America.

​

Basis for Opinion

These financial statements are the responsibility of the entity’s management. Our responsibility is to express an opinion on the entity’s financial statements based on our audit. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

​

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audit we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the entity’s internal control over financial reporting. Accordingly, we express no such opinion.

​

Our audit included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audit also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audit provide a reasonable basis for our opinion.

​

Critical Audit Matters

Critical audit matters are matters arising from the current period audit of the financial statements that were communicated or required to be communicated to the audit committee and that: (1) relate to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgements. We determined that there are no critical audit matters.

​

/s/ Macias Gini & O’Connell LLP

​

We have served as the Company’s auditor since 2021.

Irvine, CA

March 29, 2022

​

33

Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders of
Interlink Electronics, Inc. & Subsidiaries

​

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheet of Interlink Electronics, Inc. & Subsidiaries (the Company) as of December 31, 2020, and the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows for the year then ended, and the related notes (collectively referred to as the consolidated financial statements). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2020, and the consolidated results of its operations and its cash flows for the year then ended, in conformity with accounting principles generally accepted in the United States of America.

​

Basis for Opinion

These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s consolidated financial statements based on our audit. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

​

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audit, we are required to obtain an understanding of internal control over financial reporting, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

​

Our audit included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audit also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audit provide a reasonable basis for our opinion.

​

Critical Audit Matter

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that: (1) relates to accounts or disclosures that are material to the consolidated financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing separate opinions on the critical audit matter or on the accounts or disclosures to which it relates.

​

Realizability of deferred tax assets

As described in Notes 1 and 6 to the consolidated financial statements, the Company recognizes deferred income taxes for the effects of temporary differences between the tax basis of an asset or liability and their reported amounts in the accompanying consolidated balance sheet. These temporary differences result in taxable or deductible amounts in future years. Valuation allowances are established, when necessary, to reduce deferred tax assets to the amount that is more likely than not to be realized.

​

As of December 31, 2020 the Company concluded it is more likely than not the Company will generate sufficient taxable income primarily within the applicable net operating loss periods to fully realize $527 thousand of its net deferred tax assets. We identified the realizability of deferred tax assets as a critical audit matter due to the Company’s tax structure and the significant judgments and

34

Table of Contents

estimates made by management to determine that sufficient taxable income will be generated to realize a portion of deferred tax assets prior to expiration. This required a high degree of auditor judgment and an increased extent of effort when performing audit procedures to evaluate management’s estimates of taxable income in relation to the duration of statutory carryforward periods for the use of these deferred tax assets.

​

The primary procedures we performed to address this critical audit matter included:

​

/s/ RBSM LLP

We served as the Company’s auditor since 2017, which ended in 2021.

Larkspur, CA

March 16, 2021

 ​

​

35

Table of Contents

​

INTERLINK ELECTRONICS, INC.

CONSOLIDATED BALANCE SHEETS

​

​

The accompanying notes are an integral part of these consolidated financial statements.

​

36

Table of Contents

INTERLINK ELECTRONICS, INC.

CONSOLIDATED STATEMENTS OF OPERATIONS

​

​

​

37

Table of Contents

INTERLINK ELECTRONICS, INC.

CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)

​

​

The accompanying notes are an integral part of these consolidated financial statements.

​

38

Table of Contents

INTERLINK ELECTRONICS, INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY

​

​

The accompanying notes are an integral part of these consolidated financial statements.

​

39

Table of Contents

​

INTERLINK ELECTRONICS, INC.

CONSOLIDATED STATEMENTS OF CASH FLOWS

​