INTEST CORP - Annual Report: 2007 (Form 10-K)

Cautionary Statement Regarding Forward-Looking Statements

From time to time, we make written or oral "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995, including statements contained in our filings with the Securities and Exchange Commission, or SEC, (including this Report on Form 10-K), our annual report to stockholders and in other communications. These statements do not convey historical information, but relate to predicted or potential future events, such as statements of our plans, strategies and intentions, or our future performance or goals. Our forward-looking statements can often be identified by the use of forward-looking terminology such as "believes," "expects," "intends," "may," "will," "should" or "anticipates" or similar terminology, and include, but are not limited to, statements made in this Report regarding:

Investors and prospective investors are cautioned that such forward-looking statements are only projections based on current estimations. These statements involve risks and uncertainties and are based upon various assumptions. We discuss many of these risks and uncertainties under Item 1A "Risk Factors," below, and elsewhere in this Report. These risks and uncertainties, among others, could cause our actual future results to differ materially from those described in our forward-looking statements or from our prior results. We are not obligated to update these forward-looking statements, even though our situation may change in the future.

INTRODUCTION

We are an independent designer, manufacturer and marketer of manipulator and docking hardware, temperature management and tester interface products that are used by semiconductor manufacturers in conjunction with automatic test equipment, or ATE, in the testing of integrated circuits, or ICs. Our high performance products are designed to enable semiconductor manufacturers to improve the efficiency of their IC test processes and, consequently, their profitability. We supply our products worldwide to major semiconductor manufacturers and semiconductor test subcontractors directly and through leading ATE manufacturers. Our largest customers include Analog Devices, Inc., Avago Technologies, Cascade Microtech, Inc., Freescale Semiconductor, Inc., Finisar Corporation, Hakuto Co. Ltd., LTX Corporation, STMicroelectronics N.V., Teradyne, Inc. and Texas Instruments Incorporated.

The consolidated entity is comprised of inTEST Corporation (parent) and our wholly-owned subsidiaries. inTEST Corporation was incorporated in New Jersey in 1981 and reincorporated in Delaware in April 1997. We manage our business as three product segments as more fully discussed under "Our Segments" below. Our Manipulator and Docking Hardware Product segment consists of our manufacturing operation in Cherry Hill, New Jersey as well as our subsidiaries in Singapore (inTEST Pte), Japan (inTEST KK) and Germany (Intestlogic GmbH). Our Temperature Management Product segment consists of our subsidiaries in Sharon, Massachusetts (Temptronic Corporation) and Germany (Temptronic GmbH). Our Tester Interface Product segment consists of our subsidiary in San Jose, California (inTEST Silicon Valley Corporation).

INDUSTRY

Overview

The semiconductor market has been characterized by rapid technological change, wide fluctuations in demand and shortening product life cycles. Designers and manufacturers of a variety of electronic and industrial products, such as cell phones, telecom and datacom systems, Internet access devices, computers, transportation and consumer electronics, require increasingly complex ICs to provide improved end-product performance demanded by their customers.

Semiconductor manufacturers generally compete based on product performance and price. We believe that testing costs represent a significant portion of the total cost of manufacturing ICs. Semiconductor manufacturers are under more pressure to maximize production yields and reduce testing costs. At the same time, the growing complexity of ICs has increased the difficulty of maximizing test yields. In order to address these market trends, semiconductor manufacturers strive for more effective utilization of ATE, smaller test areas and increased wafer level testing.

Demand for new ATE and related equipment depends upon several factors, including the demand for products that incorporate ICs, the increasing complexity of ICs and the emergence of new IC design, production and packaging technologies. Some of the evolutionary changes in IC technologies include the shift to 300 mm wafers in production, system-on-a-chip, or SOC, where digital, analog and memory functions are combined on a single IC, and chip scale packaging. As a result of these and other advances, semiconductor manufacturers may require additional ATE not only to handle increases in production but also to handle the more sophisticated testing requirements of ICs.

IC Test Process

Semiconductor manufacturers typically produce ICs in multiples of several hundred on a silicon wafer which is later separated or "diced" into individual ICs. Extended leads are then attached to the individual ICs, for later connection to other electrical components. In most cases, the ICs are then encapsulated in a plastic, ceramic or other protective housing. These process steps are called "packaging."

Wafers are tested before being diced and packaged, to ensure that only properly functioning ICs are packaged. This testing step has several names, including "front-end test," "wafer test," "wafer probe" or "wafer sort." In front-end test, an electronic handling device known as a wafer prober automatically positions the wafer under a probe card which is electronically connected to a "test head," which connects electrically to a test system. During front-end testing there is a growing trend of thermally conditioning the wafer during test, especially in the memory and automotive markets. Once the good ICs have been identified, they are packaged.

The packaged ICs also require testing, called "back-end test" or "final test," to determine if they meet design and performance specifications. Packaged ICs are tested after loading into another type of electronic handling device called a "package handler" or "handler," which then transfers the packaged ICs into a test socket which is attached to the test head. These handlers may be temperature controlled for testing. "Wafer probers" and "handlers" are sometimes referred to in this Report collectively as "electronic device handlers."

Testers range in price from approximately $100,000 to over $3.0 million each, depending primarily on the complexity of the IC to be tested and the number of test heads (typically one or two) with which each tester is configured. Probers and handlers range in price from approximately $50,000 to $500,000. A typical test floor of a large semiconductor manufacturer may have 100 test heads and 100 probers or 250 handlers supplied by various vendors for use at any one time.

Test head manipulators, also referred to as positioners, facilitate the movement of the test head to the electronic device handler. Docking hardware mechanically connects the test head to the wafer prober or handler. Tester interface products provide the electrical connection between the test head and the wafer or packaged IC. Traditionally, temperature management products are used in back-end test to allow a manufacturer to test packaged ICs under the extreme temperature conditions in which the IC may be required to operate. However, we believe that temperature-controlled testing will be an increasingly important part of front-end wafer testing as more parameters traditionally tested for in back end-test are moved to front-end test.

Trends in IC Testing

ATE is used to identify unacceptable packaged ICs and bad die on wafers. ATE assists IC manufacturers in controlling test costs by performing IC testing in an efficient and cost-effective manner. In order to provide testing equipment that can help IC manufacturers meet these goals, we believe the ATE industry must address the following issues:

Change in Technology. Currently, most semiconductor manufacturers use 200 mm and 300 mm wafer technology, with 300 mm technology gradually replacing 200 mm technology in order to increase throughput and lower manufacturing costs. In addition, end-user applications are demanding ICs with increasingly higher performance, greater speeds, and smaller sizes. ICs that meet these higher standards are more complex and dense. SOC designs are likely to be more in demand in the future. These technology trends have significant implications for the IC testing process, including:

Need for Plug-Compatibility and Integration. Semiconductor manufacturers need test methodologies that will perform increasingly complex tests while lowering the overall cost of testing. This can require combining ATE manufactured by various companies into optimally performing systems. Semiconductor manufacturers have to work closely with various test hardware, software, interface and component vendors to resolve design and compatibility issues in order to make these vendors' products plug-compatible with test equipment manufactured by other vendors.

Testing Under Extreme Conditions. ICs will have to perform across a wider spectrum of temperature and environmental conditions than ever before because of the growing complexity of products in which they are deployed. Temperature testing will likely find an increasing role in front-end, wafer level testing. Creating a uniform thermal profile over much larger wafer areas represents a significant engineering and design challenge for ATE manufacturers.

Demand for Higher Levels of Technical Support. As IC testing becomes more complex, semiconductor manufacturers are demanding higher levels of technical support on a routine basis. ATE manufacturers must commit greater resources to technical support in order to develop close working relationships with their customers. This level of support also requires close proximity of service and support centers to customers' facilities.

Cost Reduction Through Increased Front-End Testing. As the cost of testing ICs increases, semiconductor manufacturers will continue to look for ways to streamline the testing process to make it more cost-effective, such as the recent trend to use massive parallel test, in which semiconductor manufacturers test multiple ICs on the wafer simultaneously. We believe that this factor will lead to more front-end, wafer-level testing.

OUR SOLUTIONS

We focus our development efforts on designing and producing high quality products that provide superior performance and cost-effectiveness. We seek to address each manufacturer's individual needs through innovative and customized designs, use of the best materials available, quality manufacturing practices and personalized service. We design solutions to overcome the evolving challenges facing the ATE industry which we believe provide the following advantages:

Scalable, Universal, High Performance Interface Technology. Our universal test head manipulators provide a high degree of positioning flexibility with a minimum amount of effort. As a result, our products can be used in virtually any test setting. Our manipulator products are designed to accommodate the increased size of test heads. Our docking hardware offers precise control over the connection to test sockets, probing assemblies and interface boards, reducing downtime and minimizing costly damage to fragile components. Our tester interface products optimize the integrity of the signals transmitted between the test head and the device under test by being virtually transparent to the test signals. This results in increased accuracy of the test data and may thus enable improved test yields. We believe that these characteristics will gain even more significance as testing becomes even more demanding.

Compatibility and Integration. A hallmark of our products has been, and continues to be, compatibility with a wide variety of ATE. Our manipulators and docking hardware are all designed to be used with otherwise incompatible ATE. We believe this integrated approach to ATE facilitates smooth changeover from one tester to another, longer lives for interface components, better test results, increased ATE utilization and lower overall test costs.

Temperature-Controlled Testing. Our Thermostream (R) products are used by manufacturers in a number of industries to stress test a variety of semiconductor and electronic components, PC boards and sub-assemblies. Our Thermochuck (R) products are used by semiconductor manufacturers for front-end temperature stress screening at the wafer level. Factors motivating manufacturers to use temperature testing include design characterization, failure analysis and quality control as well as determining performance under extreme operating temperatures, all of which contribute to manufacturing cost savings.

Worldwide Customer Service and Support. We have long recognized the need to maintain a physical presence near our customers' facilities. We have domestic manufacturing facilities in New Jersey, Massachusetts and California, as well as overseas facilities in Europe and Asia. We provide service to our customers from sales and service offices in the U.S., Europe and Asia. Our engineers are easily accessible to, and can work directly with, most of our customers from the time we begin developing our initial proposal, through the delivery, installation and use of the product by our customer. In this way, we are able to develop and maintain close relationships with our customers.

OUR STRATEGIES

We remain committed to our goals of being recognized in our markets as the designer and manufacturer of the highest quality and most cost effective products and becoming the key supplier of all of our customers' ATE needs, other than probers, handlers and testers. Our strategies to achieve these goals include the following:

Providing Technologically Advanced Solutions. We are committed to designing and producing only the highest quality products which incorporate innovative designs to achieve optimal cost-effectiveness and functionality for each customer's particular situation. Our engineering and design staff is continually engaged in developing new and improved products and manufacturing processes.

Leveraging Our Strong Customer Relationships. Our technical personnel work closely with ATE manufacturers to design tester interface and docking hardware that are compatible with their ATE. As a result, we are often privy to proprietary technical data and information about these manufacturers' products. We believe that because we do not compete with ATE manufacturers in the prober, handler and tester markets, we have been able to establish strong collaborative relationships with these manufacturers that enable us to develop ancillary ATE products on an accelerated basis.

Maintaining Our International Presence. Our existing and potential customers are concentrated in certain regions throughout the world. We believe that we must maintain a presence in the markets in which our customers operate. We currently have offices in the U.S., Europe and Asia.

Pursuing Synergistic Acquisitions. A key element of our growth strategy is to acquire businesses, technologies or products that are complementary to our current product offerings. Our TestDesign (now inTEST Silicon Valley), Temptronic and Intestlogic acquisitions have expanded our line of product offerings and have given us the opportunity to market a broader range of products to our customer base and, in the case of the Temptronic acquisition, provided access to markets that are less sensitive to cyclicality than the ATE market. We seek to make acquisitions that will further expand our product lines, enabling us to become a key supplier to the test floor for a complete selection of equipment compatible with testers, probers and handlers of all manufacturers.

Pursuing Revenue Growth Opportunities Outside the Semiconductor ATE Market. Another element of our growth strategy is to pursue revenue growth opportunities in markets we have not traditionally served, such as the aerospace, automotive, communications, consumer electronics, defense and medical industries. We believe that we may be able to reduce some of the cyclicality that we have historically experienced by further diversifying our revenue streams outside the semiconductor ATE market. We see the most potential for this within our Temperature Management Product segment. For the years ended December 31, 2007, 2006 and 2005 approximately $7.0 million or 15%, $6.1 million or 10% and $6.3 million or 12%, respectively, of our consolidated net revenues were derived from markets outside semiconductor test. These revenues were all generated by our Temperature Management Product segment. We cannot determine at this time whether we will continue to be successful in building our sales in these non-traditional markets or what the growth rate of our sales in these markets will be in future periods.

Controlling costs. At the same time as we are pursuing growth opportunities, we will seek ways to more aggressively streamline our cost structure, so that we are positioned to offer products at prices that provide the margin for a reasonable profit as well as the resources for continual product development.

OUR SEGMENTS

Our business is managed as three segments, which are also our reporting units: Manipulator and Docking Hardware Products, Temperature Management Products and Tester Interface Products. Semiconductor manufacturers use our manipulators and docking hardware products during testing of wafers and specialized packaged ICs. They use our temperature management and tester interface products in both front-end and back-end testing of ICs. These ICs include microprocessors, digital signal processing chips, mixed signal devices, MEMS (Micro-Electro-Mechanical Systems), application specific ICs and specialized memory ICs, and are used primarily in the automotive, aerospace, computer, consumer products and telecommunications industries. We custom design most of our products for each customer's particular combination of ATE.

Manipulator and Docking Hardware Products

Manipulator Products. We offer four lines of manipulator products: the in2(R), the M Series, the Aero Series and the recently introduced IU Series. These free-standing universal manipulators can hold a variety of test heads and enable an operator to reposition a test head for alternate use with any one of several probers or handlers on a test floor. Certain members of the Aero family are also available as a lower-cost solution for dedicated prober-only or handler-only test cell applications.

The in2(R) and IU Series of manipulator products incorporate our balanced floating-head design. This design permits a test head weighing up to 3,000 pounds to be held in an effectively weightless state, so it can be moved manually or with optional powered assistance, up or down, right or left, forward or backward and rotated around each axis (known as six degrees of motion freedom) by an operator using a modest amount of force. The same design features enable the operator to dock the test head without causing inadvertent damage to the fragile electrical contacts. As a result, after testing a particular production lot of ICs, the operator can quickly and easily disconnect a test head that is held in an in2(R) manipulator and equipped with our docking hardware and dock it to another electronic device handler for testing either a subsequent lot of the same packaged ICs or to test different ICs. The in2(R) and IU Series manipulators range in price from approximately $12,000 to $159,000.

The M Series line of manipulator products consists of the M400 and M500 manipulators. These compact universal manipulators are designed to handle test heads weighing less than 550 pounds. The up and down movement is counter-balanced by an air-pressure-based floating state technology. The M Series manipulators range in price from approximately $12,000 to $32,000.

The Aero Series of manipulator products consists of the Aero 650, Aero 450H and Aero 150P manipulators. These manipulators are designed to handle test heads weighing less than 1,500 pounds. The up and down movement is supported by an air-pressure-based floating state technology. The Aero Series manipulators range in price from $10,000 to $50,000.

Docking Hardware Products. Our docking hardware products protect the delicate interface contacts and ensure proper repeatable and precise alignment between the test head's interface board and the prober's probing assembly or the handler's test socket as they are brought together, or "docked." A simple cam action docks and locks the test head to the prober or handler, thus eliminating motion of the test head relative to the prober or handler. This minimizes deterioration of the interface boards, test sockets and probing assemblies which is caused by constant vibration during testing. Our docking hardware products are used primarily with floating-head universal manipulators when maximum mobility and inter-changeability of handlers and probers between test heads is required. By using our docking hardware products, semiconductor manufacturers can achieve cost savings through improved ATE utilization, improved accuracy and integrity of test results, and reduced repairs and replacements of expensive ATE interface products.

We believe our docking hardware products offer our customers the ability to make various competing brands of test heads compatible with various brands of probers and handlers by only changing interface boards. This is called "plug-compatibility." Plug-compatibility enables increased flexibility and utilization of test heads, probers and handlers purchased from various manufacturers. We believe that because we do not compete with ATE manufacturers in the sale of probers, handlers or testers, ATE manufacturers are willing to provide us with the information that is integral to the design of plug-compatible products. Our docking hardware products range in price from approximately $2,000 to $25,000.

Temperature Management Products

Our temperature management products are sold into a wide variety of industries including the aerospace, automotive, communications, consumer electronics, defense, medical and semiconductor industries. Our temperature management systems enable a manufacturer to test a semiconductor wafer, IC or electronic, or in some instances, a mechanical sub-assembly over the extreme and variable temperature conditions that can occur in the actual use of the device.

In Europe and Japan, we sell to semiconductor and ATE manufacturers through our account managers and through the use of independent sales representatives. In China, Malaysia, the Philippines, Singapore, South Korea, Taiwan and Thailand, we sell through the use of independent sales representatives who are supervised by our direct sales staff in those regions. International sales representatives are responsible for sales, installation, support and trade show participation in their geographic market areas.

Temperature Management Products: Sales to ATE manufacturers are handled directly by our own sales force. Sales to semiconductor manufacturers and customers in other industries in the U.S. are handled through independent sales representative organizations. In Singapore and Malaysia, our sales and service are handled through our own sales and service personnel. In the rest of Asia, our sales are handled through distributors. In Europe, sales managers at our office in Germany, as well as regional distributors and independent sales representatives, sell to semiconductor manufacturers and customers in other industries. We visit our distributors regularly and have trained them to sell and service all of our temperature management products.


CUSTOMERS

We market all of our products to end users, which include semiconductor manufacturers and third-party foundries, test and assembly houses as well as original equipment manufacturers ("OEMs"), which include ATE manufacturers and their third-party outsource manufacturing partners. In the case of temperature management products, we also market our products to independent testers of semiconductors, manufacturers of electronic, automotive and aeronautical products, and semiconductor research facilities. Our customers use our products principally in production testing, although our ThermoStream(R) products traditionally have been used largely in engineering development and quality assurance. We believe that we sell to most of the major semiconductor manufacturers in the world.

Texas Instruments Incorporated accounted for 20%, 19% and 16% of our consolidated net revenues in 2007, 2006 and 2005, respectively. While all three of our operating segments sold to these customers, these revenues were primarily generated by our Manipulator and Docking Hardware and Tester Interface Product segments. Our ten largest customers accounted for approximately 54%, 59% and 56% of our net revenues in 2007, 2006 and 2005, respectively. The loss of any one or more of our largest customers, or a reduction in orders by a major customer, could materially reduce our net revenues or otherwise materially affect our business, financial condition, or results of operations.

Our largest customers include:

We conduct inspections of incoming raw materials, fabricated parts and components using sophisticated measurement equipment. This includes testing with coordinate measuring machines in all but one of our manufacturing facilities to ensure that products with critical dimensions meet our specifications. We have designed our inspection standards to comply with applicable MIL specifications and ANSI standards.

In 2001, we obtained ISO 9001:1994 certification at our New Jersey facility. During 2003, we made the determination to upgrade to ISO 9001:2000 at our Cherry Hill facility, which was completed in 2007. In May 2003, our California facility obtained ISO 9001:2000 certification and in November 2004, our Massachusetts facility completed ISO 9001:2000 certification. Finally, our Singapore and German facilities have not yet begun the ISO certification process.


ENGINEERING AND PRODUCT DEVELOPMENT

Our success depends on our ability to provide our customers with products and solutions that are well engineered, and to design those products and solutions before, or at least no later than, our competitors. As of December 31, 2007, we employed a total of 43 engineers, who were engaged full time in engineering and product development. In addition, when the demands of engineering and product development projects exceed the capacity or knowledge of our in-house staff, we retain temporary third-party engineering and product development consultants to assist us. Our practice in many cases is to assign engineers to work with specific customers, thereby enabling us to develop the relationships and exchange of information that is most conducive to successful product development and enhancement. In addition, some of our engineers are assigned to new product research and development and have worked on such projects as the development of new types of universal manipulators, the redesign and development of new temperature management products and the development of high performance interfaces.

Since most of our products are customized, we consider substantially all of our engineering activities to be engineering and product development. We spent approximately $5.5 million in 2007, $5.9 million in 2006 and $6.4 million in 2005 on engineering and product development, respectively.


PATENTS AND OTHER PROPRIETARY RIGHTS

Our policy is to protect our technology by filing patent applications for the technologies that we consider important to our business. We also rely on trade secrets, copyrights and unpatentable know-how to protect our proprietary rights. It is our practice to require that all of our employees and third-party product development consultants assign to us all rights to inventions or other discoveries relating to our business that were made while working for us. In addition, all employees and third-party product development consultants agree not to disclose any private or confidential information relating to our technology, trade secrets or intellectual property.

As of December 31, 2007, we held 52 active U.S. patents and had 26 pending U.S. patent applications covering various aspects of our technology. Our U.S. patents expire at various times beginning in 2008 and extending through 2025. During 2007, we had no U.S. patents expire and 9 U.S. patents were issued. We also hold foreign patents and file foreign patent applications, in selected cases corresponding to our U.S. patents and patent applications, to the extent management deems appropriate.

While we believe that our patents and other proprietary rights are important to our business, we also believe that, due to the rapid pace of technological change in the semiconductor equipment industry, the successful manufacture and sale of our products also depends upon our engineering, manufacturing, marketing and servicing skills. In the absence of patent protection, we would be vulnerable to competitors who attempt to copy or imitate our products or processes. We believe our intellectual property has value, and we have taken in the past, and will take in the future, actions we deem appropriate to protect such property from misappropriation. There can be no assurance, however, that such actions will provide meaningful protection from competition. For additional information regarding risks related to our intellectual property, see "Risk Factors".

COMPETITION

As described earlier, we operate in an increasingly competitive environment within each of our product segments. Some of our competitors have greater financial resources and more extensive design and production capabilities than we do. Certain markets in which we operate have recently become more fragmented, with smaller companies entering the market. These new smaller entrants typically have much lower levels of fixed operating overhead than we do, which enables them to be profitable with lower priced products. In order to remain competitive with these and other companies, we must be able to continue to commit a significant portion of our personnel, financial resources, research and development and customer support to developing new products and maintaining customer relationships worldwide.

Our competitors include independent manufacturers, ATE manufacturers and, to a lesser extent, semiconductor manufacturers' in-house ATE interface groups. Competitive factors in our market include price, functionality, timely product delivery, customer service, applications support, product performance and reliability. We believe that our long-term relationships with the industry's leading semiconductor manufacturers and other customers, and our commitment to, and reputation for, providing high quality products, are important elements in our ability to compete effectively in all of our markets.

Our principal competitors for manipulator products are Esmo AG, Microhandling GmbH, Reid-Ashman Manufacturing and Advantest Corporation. Our principal competitors for docking hardware products include Esmo AG, Knight Automation, Estra Technologies, Reid-Ashman Manufacturing and Microhandling GmbH. We also compete with the ATE manufacturer Teradyne (who is also our customer) on the sale of docking hardware.

Our principal competitors for Thermostream products are Thermonics and FTS Systems. Our principal competitors for Thermochuck products include ERS Electronik GmbH, Advances Temperature Systems GmbH and Espec Corp. In addition, we compete with most manufacturers of environmental chambers in the sales of our other temperature management products.

Our principal competitors for Tester Interface products are Xandex, Inc., Reid-Ashman Manufacturing, Esmo AG, Synergetix (a division of Interconnect Devices, Inc.), and Integrated Test Corporation.

BACKLOG

At December 31, 2007, our backlog of unfilled orders for all products was approximately $4.2 million compared with approximately $4.8 million at December 31, 2006. Our backlog includes customer orders which we have accepted, substantially all of which we expect to deliver in 2008. While backlog is calculated on the basis of firm purchase orders, a customer may cancel an order or accelerate or postpone currently scheduled delivery dates. Our backlog may be affected by the tendency of customers to rely on shorter lead times available from suppliers, including us, in periods of depressed demand. In periods of increased demand, there is a tendency towards longer lead times that has the effect of increasing backlog. As a result of these factors, our backlog at a particular date is not necessarily indicative of sales for any future period.

EMPLOYEES

At December 31, 2007, we had 209 full time employees, including 93 in manufacturing operations, 80 in customer support/operations and 36 in administration. Substantially all of our key employees are highly skilled and trained technical personnel. None of our employees are represented by a labor union, and we have never experienced a work stoppage. We believe that our relationship with our employees is very good. From time to time we retain third-party consultants to assist us in engineering and product development projects and to assist us with our compliance efforts resulting from the Sarbanes-Oxley Act.

ADDITIONAL INFORMATION

Our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q and Current Reports on Form 8-K, and amendments to these reports that are filed with the SEC pursuant to Section 13(a) or 15(d) of the Exchange Act, are available free of charge through our website (www.intest.com) as soon as reasonably practicable after we electronically file them with, or furnish them to, the SEC.

The following are some of the factors that could materially and adversely affect our future performance or could cause actual results to differ materially from those expressed or implied in our forward-looking statements. The risks and uncertainties described below are not the only ones facing us and we cannot predict every event and circumstance that may adversely affect our business. However, these risks and uncertainties are the most significant factors that we have identified at this time. If one or more of these risks actually occurs, our business, results of operations, and financial condition would likely suffer, and the price of our stock would be negatively affected.

Our sales are affected by the cyclicality of the semiconductor industry, which causes our operating results to fluctuate significantly.

Our business depends in significant part upon the capital expenditures of semiconductor manufacturers. Capital expenditures by these companies depend upon, among other things, the current and anticipated market demand for semiconductors and the products that utilize them. Typically, semiconductor manufacturers curtail capital expenditures during periods of economic downtown. Conversely, semiconductor manufacturers increase capital expenditures when market demand requires the addition

of new or expanded production capabilities or the reconfiguration of existing fabrication facilities to accommodate new products. These market changes have contributed in the past, and will likely continue to contribute in the future, to fluctuations in our operating results.

Changes in the buying patterns of our customers have affected, and may continue to affect, demand for our products and our gross and net operating margins. Such changes in patterns are difficult to predict and may not be immediately apparent.

In addition to the cyclicality of the semiconductor market, demand for our products and our gross and net operating margins have also been affected by changes in the buying patterns of our customers. We now believe that in recent years there have been a variety of emerging changes within the ATE market, including, for example, changing product requirements, longer time periods between new product offerings by OEMs and changes in customer buying patterns. In particular, demand for our Manipulator, Docking Hardware and Tester Interface products, which are sold exclusively within the ATE industry, and our operating margins in these product segments have been affected by shifts in the competitive landscape, including (i) customers placing heightened emphasis on shorter lead times (which places increased demands on our available engineering and production capacity increasing unit costs) and ordering in smaller quantities (which prevents us from acquiring component materials in larger volumes at lower cost and increasing unit costs), (ii) the increasing practice of OEM manufacturers to specify other suppliers as primary vendors, with less frequent opportunities to compete for such designations, (iii) customers requiring products with a greater range of use at the lowest cost, and (iv) customer supply line management groups demanding lower prices and spreading purchases across multiple vendors. These recently emerging shifts in market practices have had, and may continue to have, varying degrees of impact on our net revenues and our gross and net operating margins. Such shifts are difficult to predict and may not be immediately apparent, and the impact of these practices is difficult to quantify from period to period. There can be no assurance that we will be successful in implementing effective strategies to counter these shifts.

If we are not able to reduce our operating expenses during periods of weak demand, or if we utilize significant amounts of cash to implement our acquisition strategy, we will erode our cash resources and may not have sufficient cash to operate our businesses.

In recent years, we have implemented cost controls and restructured our operations with the goal of significantly reducing our fixed operating costs to position ourselves to more effectively meet the needs of the fluid ATE market. We are presently assessing additional ways to lower our cost structure and increase revenues. If we are not successful in controlling our operating expenses, or if we utilize significant amounts of cash to implement our acquisition strategy, the level of our cash may be eroded and may not be sufficient to operate our businesses. As of December 31, 2007 we had cash and cash equivalents of $12.2 million. While we believe our cash balances will be sufficient to satisfy our cash requirements for the foreseeable future, we cannot determine with certainty that, if needed, we would be able to raise additional funding through either equity or debt financing under these circumstances or on what terms such financing would be available.

Our operating results often change significantly from quarter to quarter and may cause fluctuations in our stock price.

During the last several years, our operating results have fluctuated significantly from quarter to quarter. We believe that these fluctuations occur primarily due to the cycles of demand in the semiconductor manufacturing industry. In addition to the changing cycles of demand in the semiconductor manufacturing industry, other factors that have caused our quarterly operating results to fluctuate in the past, and that may cause fluctuations and losses in the future, include:

Because the market price of our common stock has tended to vary based on, and in relation to, changes in our operating results, fluctuations in the market price of our stock are likely to continue as variations in our quarterly results continue.

Our customers' purchasing patterns can vary significantly from month to month and cannot be easily predicted, thus resulting in fluctuations in our backlog and quarterly results.

Our backlog at December 31, 2007 was $4.2 million compared to $4.8 million at December 31, 2006. Our backlog at the beginning of a quarter typically does not include all orders necessary to achieve our sales objectives for that quarter. Orders in our backlog are subject to cancellation, delay or rescheduling by our customers with limited or no penalties or ability to collect bill back amounts. Throughout recent years, we have experienced customer-requested shipment delays and order cancellations, and we believe it is probable that orders will be cancelled and/or delayed in the future. In addition, during a downturn, some of our customers may rely on short lead times generally available from suppliers, including us, whereas in periods of stronger demand, and longer lead times, customers need to book orders earlier.

We have experienced varying levels of product warranty costs in recent periods and cannot predict the level of such costs that we may incur in future periods.

We accrue product warranty charges quarterly, based upon our historical claims experience. In addition, from time to time, we accrue additional amounts based upon known product warranty issues, such as product retrofits. For the years ended December 31, 2007, 2006 and 2005, our product warranty charges (recoveries) were $(198,000), $378,000 and $549,000, or (0.4)%, 0.6% and 1.0% of net revenues, respectively. The level of our product warranty charges both in absolute dollars and as a percentage of net revenues is affected by a number of factors including the cyclicality of demand in the ATE industry, the prototype nature of much of our business, the complex nature of many of our products, the introduction of new product "families" which typically have higher levels of warranty claims than existing product families and, at our discretion, providing warranty repairs or replacements to customers after the contractual warranty period has expired in order to promote strong customer relations. If our products have reliability, quality or other problems, or the market perceives our products to be deficient, we may suffer reduced orders, higher manufacturing costs, delays in collecting accounts receivable and higher service, support and warranty expenses.

Changes in securities laws and regulations have increased, and may continue to increase, our costs of compliance with such laws and regulations.

Changes in securities laws and regulations have increased our legal compliance and financial reporting costs. Additional recent changes and future changes in securities regulations are expected to continue to affect our costs. In order to comply with certain requirements of the Sabanes-Oxley Act, such as the internal control system requirements of Section 404 of the Act, we have incurred, and expect to incur significant additional expenses in future periods to comply with these new requirements, including the requirement for future reviews of our internal control system by our independent accounting firm. We are continuing to evaluate and monitor regulatory developments and cannot estimate the timing or magnitude of additional costs we may incur as a result.

The inability to maintain effective internal control over financial reporting may result in a loss of investor confidence in the accuracy and completeness of our financial reporting.

Section 404 of the Sarbanes-Oxley Act of 2002 and the accompanying rules and regulations promulgated by the SEC to implement that law require us to include in our Form 10-K for the year ending December 31, 2007, an annual report by our management regarding the effectiveness of our internal control over financial reporting. In the future, we will be required to include in our Annual Reports on Form 10-K attestation reports by our independent registered public accounting firm (our IRPAF), reporting as to whether it believes we maintained, in all material respects, effective internal control over financial reporting as of the end of the relevant year. During our assessment process, if our management identifies one or more material weaknesses in our internal controls over financial reporting that cannot be remediated in a timely manner, we may be unable to assert that our internal control is effective. While our assessment (as reported in Item 9A(T) of this Report) is that our internal control over financial reporting was effective as of December 31, 2007, the effectiveness

Our acquisition strategy involves financial and management risks which may adversely affect our results in the future.

If we acquire additional businesses, technologies or products, we will face the following additional risks:

If any of the events described above occur, our earnings could be reduced. If we issue shares of our stock or other rights to purchase our stock in connection with any future acquisitions, we would dilute our existing stockholders' interests and our earnings per share may decrease. If we issue debt in connection with any future acquisitions, lenders may impose covenants on us which could, among other things, restrict our ability to increase capital expenditures or to acquire additional businesses.

Our industry is subject to rapid technological change, and our business prospects would be negatively affected if we are unable to quickly and effectively respond to innovation in the semiconductor industry.

Semiconductor technology continues to become more complex as manufacturers incorporate ICs into an increasing variety of products. This trend, and the changes needed in automatic testing systems to respond to developments in the semiconductor industry, are likely to continue. We cannot be certain that we will be successful or timely in developing, manufacturing or selling products that will satisfy customer needs or that will attain market acceptance. Our failure to provide products that effectively and timely meet customer needs or gain market acceptance will negatively affect our business prospects.

If we are not able to obtain patents on or otherwise preserve and protect our proprietary technologies, our business may suffer.

We have obtained domestic and foreign patents covering some of our products which expire between the years 2008 and 2025, and we have applications pending for additional patents. Some of our products utilize proprietary technology that is not covered by a patent or similar protection, and, in many cases, cannot be protected. We cannot be certain that:

If we cannot obtain patent or other protection for our proprietary technologies, our ability to compete in our markets could be impaired.

Claims of intellectual property infringement by or against us could seriously harm our businesses.

From time to time, we may be forced to respond to or prosecute intellectual property infringement claims to defend or protect our rights or a customer's rights. These claims, regardless of merit, may consume valuable management time, result in costly litigation or cause product shipment delays. Any of these factors could seriously harm our business and operating results. We may have to enter into royalty or licensing agreements with third parties who claim infringement. These royalty or licensing agreements, if available, may be costly to us. If we are unable to enter into royalty or licensing agreements with satisfactory terms, our business could suffer. In instances where we have had reason to believe that we may be infringing the patent rights of others, or that someone may be infringing our patent rights, we have asked our patent counsel to evaluate the validity of the patents in question, as well as the potentially infringing conduct. If we become involved in a dispute, neither the third parties nor the courts are bound by our counsel's conclusions.

Our business will suffer if we cannot compete successfully with manufacturers whose products are similar to ours.

We compete with numerous manufacturers, many of whom have greater financial resources and more extensive design and production capabilities than we do. Some of our principal competitors in the sale of manipulator, docking and tester interface products are Reid-Ashman Manufacturing Inc., Microhandling GmbH, Esmo AG, Credence Systems Corp., LTX Corporation, Teradyne Inc. and Xandex Inc. Some of our principal competitors in the sale of temperature management products are Thermonics Inc., ERS Elektronik GmbH and Advances Temperature Test Systems GmbH. In order to remain competitive with these and other companies, we must be able to continue to commit a significant portion of our personnel, financial resources, research and development and customer support to developing new products and maintaining customer satisfaction worldwide. If we are not able to compete successfully, our business will suffer.

We generate a large portion of our sales from a small number of customers. If we were to lose one or more of our large customers, operating results could suffer dramatically.

Texas Instruments Inc. accounted for 20%, 19% and 16% of our consolidated net revenues in 2007, 2006 and 2005, respectively. While all three of our operating segments sold to these customers, these revenues were primarily generated by our Manipulator and Docking Hardware and Tester Interface Product segments. Our ten largest customers accounted for approximately 54%, 59% and 56% of our net revenues in 2007, 2006 and 2005, respectively. The loss of any one or more of our largest customers, or a reduction in orders by a major customer, could materially reduce our net revenues or otherwise materially affect our business, financial condition or results of operations.

Significant fluctuations in our net revenues and operating results strain our management, employees and other resources.

Over the last several years, we have experienced significant fluctuations in our net revenues and operating results. As a result of these sometimes sudden and significant changes in our market, we have implemented cost controls, including salary and benefit reductions, and restructured our operations. We are presently considering new initiatives to more closely align our cost structure with current market demands. Such fluctuations in our net revenues and operating results, compensation changes and restructuring place strain on our management, employees and other resources.

If we do not continue to retain the services of key personnel, relationships with, and sales to, some of our customers could suffer, which could have a negative impact on our business.

The loss of key personnel could adversely affect our ability to manage our business effectively. Our future success will depend largely upon the continued services of our senior management and certain other key employees. We do not have employment agreements with any of our executive officers or other key employees. Our future success will depend, in part, upon our ability to retain our managers, engineers and other key employees. Our business could suffer if we were unable to retain one or more of our senior officers or other key employees.

A substantial portion of our operations exists outside the U.S., which exposes us to foreign political and economic risks.

We have operated internationally for many years and expect to expand our international operations as necessary to continue expansion of our sales and service to our non-U.S. customers. Our foreign subsidiaries generated 26% and 32% of consolidated net revenues in 2007 and 2006, respectively. Export sales from our U.S. manufacturing facilities totaled $17.2 million, or 35% of consolidated net revenues, in 2007 and $16.8 million, or 27% of consolidated net revenues, in 2006. The portion of our consolidated net revenues that were derived from sales by our subsidiaries in the Asia-Pacific region was 12% in 2007 and 23% in 2006. We expect our international revenues will continue to represent a significant portion of total net revenues. However, in addition to the risks generally associated with sales and operations in the U.S., sales to customers outside the U.S. and operations in foreign countries are subject to additional risks, which may, in the future, affect our operations. These risks include:

We conduct business in foreign currencies, and fluctuations in the values of those currencies could result in foreign exchange losses.

In 2007, approximately 3% of our net revenues were denominated in Japanese yen and approximately 14% were denominated in Euros. During 2007, we recorded foreign exchange currency transaction losses of $187,000. Future fluctuations in the value of the Japanese Yen or the Euro could result in foreign exchange gains or losses. Any strengthening of the U.S. dollar in relation to the currencies of our competitors or customers, or strengthening or weakening of the Japanese yen or Euro in relation to other currencies in which our customers or competitors do business, could adversely affect our competitiveness. Moreover, a strengthening of the U.S. dollar or other competitive factors could put pressure on us to denominate a greater portion of our sales in foreign currencies, thereby increasing our exposure to fluctuations in exchange rates. Any devaluation of these currencies would hurt our business. We do not undertake hedging activities against the majority of our exchange rate risk. Fluctuations in exchange rates may adversely affect our competitive position or result in foreign exchange losses, either of which could cause our business to suffer.

None.

At December 31, 2007, we leased 9 facilities worldwide. The following chart provides information regarding each of our principal facilities which we occupied at December 31, 2007.

From time to time we may be a party to legal proceedings occurring in the ordinary course of business. We are not currently involved in any material legal proceedings.

No matters were submitted to our stockholders for a vote during the fourth quarter of 2007.

Our common stock is traded on NASDAQ under the symbol "INTT." The following table sets forth the high and low sale prices of our common stock, as reported on the NASDAQ Global Market, for the periods indicated. Sale prices have been rounded to the nearest full cent.

The following table contains certain selected consolidated financial data of inTEST and is qualified by the more detailed Consolidated Financial Statements and Notes thereto included elsewhere in this Annual Report on Form 10-K and should be read in conjunction with "Management's Discussion and Analysis of Financial Condition and Results of Operations" and the other financial information included in this Annual Report on Form 10-K.

Overview

Our business and results of operations are substantially dependent upon the demand for ATE by semiconductor manufacturers and companies that specialize in the testing of ICs. Demand for ATE is driven by semiconductor manufacturers that are opening new, or expanding existing, semiconductor fabrication facilities or upgrading existing equipment, which in turn is dependent upon the current and anticipated market demand for semiconductors and products incorporating semiconductors. In the past, the semiconductor industry has been highly cyclical with recurring periods of oversupply, which often have a severe impact on the semiconductor industry's demand for ATE, including the products we manufacture. This can cause wide fluctuations in both our orders and net revenues and, depending on our ability to react quickly to these shifts in demand, can significantly impact our results of operations. These industry cycles are difficult to predict and in recent years have become more volatile and shorter in duration. Because the industry cycles are generally characterized by sequential periods of growth or declines in orders and net revenues during each cycle, year over year comparisons of operating results may not always be as meaningful as comparisons of periods at similar points in either up or down cycles. In addition, during both downward and upward cycles in our industry, in any given quarter, the trend in both our orders and net revenues can be erratic. This can occur, for example, when orders are canceled or currently scheduled delivery dates are accelerated or postponed by a significant customer or when customer forecasts and general business conditions fluctuate during a quarter.

We believe that purchases of most of our products are typically made from semiconductor manufacturers' capital expenditure budgets. Certain portions of our business, however, are generally less dependent upon the capital expenditure budgets of the end users. For example, purchases of certain related ATE interface products, such as sockets and interface boards, which must be replaced periodically, are typically made from the end users' operating budgets. In addition, purchases of certain of our products, such as docking hardware, for the purpose of upgrading or improving the utilization, performance and efficiency of existing ATE, tend to be counter cyclical to sales of new ATE. Moreover, we believe a portion of our sales of temperature management products results from the increasing need for temperature testing of circuit boards and specialized components that do not have the design or quantity to be tested in an electronic device handler. In addition, in recent years we have begun to market our Thermostream temperature management systems in industries outside semiconductor test, such as the automotive, aerospace, medical and telecommunications industries. We believe that these industries usually are less cyclical than the ATE industry.

While the majority of our orders and net revenues are derived from the ATE market, our operating results do not always follow the overall trend in the ATE market in any given period. We now believe that these anomalies may be driven by a variety of emerging changes within the ATE market, including, for example, changing product requirements, longer time periods between new product offerings by OEMs and changes in customer buying patterns. In particular, demand for our manipulator, docking hardware and tester interface products, which are sold exclusively within the ATE industry, and our operating margins in these product segments have been affected by recent shifts in the competitive landscape, including (i) customers placing heightened emphasis on shorter lead times (which places increased demands on our available engineering and production capacity increasing unit costs) and ordering in smaller quantities (which prevents us from acquiring component materials in larger volumes at lower cost and increasing unit costs), (ii) the increasing practice of OEM manufacturers to specify other suppliers as primary vendors, with less frequent opportunities to compete for such designations, (iii) the increased role of third-party test and assembly houses in the ATE market and their requirement of products with a greater range of use at the lowest cost, and (iv) customer supply line management groups demanding lower prices and spreading purchases across multiple vendors. These recently emerging shifts in market practices have had, and may continue to have, varying levels of impact on

our operating results, but it is difficult to quantify the impact of these practices from period to period. Management has taken, and will continue to take, such actions it deems appropriate to adjust our strategies, products and operations to counter such shifts in market practices as they become evident.

Net Revenues and Orders

The following table sets forth, for the periods indicated, a breakdown of the net revenues from unaffiliated customers both by product segment and geographic area (based on the location of the selling entity).

Total orders for the year ended December 31, 2007 decreased to $48.1 million on a consolidated basis as compared to $61.2 million for 2006. For our Manipulator and Docking Hardware, Temperature Management and Tester Interface Product segments, total orders for 2007 were $21.4 million, $20.1 million and $6.6 million, respectively compared to $33.9 million, $20.7 million and $6.6 million, respectively, for 2006.

We believe that the decline in our net revenues and orders in 2007 reflects many of the factors discussed in the Overview. Both our Manipulator and Docking Hardware and Tester Interface Product segments continue to be significantly affected by the aforementioned shifts in the competitive landscape within the ATE market, while our Temperature Management Product segment has been less impacted by these changes in demand as a result of our ability to successfully market our Thermostream products outside the semiconductor industry. In 2007, 32% of our Temperature Management Product segment's net revenues were attributable to customers in markets outside of semiconductor test. The reduction in net revenues in our Manipulator and Docking Hardware Product segment during 2007 was compounded by the reduction in revenues from sales of certain third-party manufactured products distributed by our Japanese subsidiary, which were $963,000 in 2007 compared to $6.3 million in 2006. In early 2007, we were notified that the contract under which we sold these products would be ending, and, after the second quarter of 2007, we had no additional sales of these products.

Backlog

At December 31, 2007, our backlog of unfilled orders for all products was approximately $4.2 million compared with approximately $4.8 million at December 31, 2006. Our backlog includes customer orders which we have accepted, substantially all of which we expect to deliver in 2008. While backlog is calculated on the basis of firm purchase orders, a customer may cancel an order or accelerate or postpone currently scheduled delivery dates. Our backlog may be affected by the tendency of customers to rely on short lead times available from suppliers, including us, in periods of depressed demand. In periods of increased demand, there is a tendency towards longer lead times that has the effect of increasing backlog. As a result, our backlog at a particular date is not necessarily indicative of sales for any future period.

Business Restructuring Initiatives

In response to the cyclical nature of the ATE market in which we operate, we have taken various actions to restructure our operations in recent years. The goal of these actions was to significantly reduce our fixed operating costs and position ourselves to more effectively meet the needs and expectations of the cyclical ATE market. In the past, these restructuring actions have included workforce reductions and facility closures which allowed us to eliminate excess manufacturing capacity at certain of our locations. Additional information regarding the various restructuring plans implemented in recent years, including the costs incurred, is set forth in Note 10 to the consolidated financial statements.

In early 2008, we commenced a review of our operations to more aggressively streamline our cost structure in line with the current business environment. As part of this process, we will also focus on methods to increase our profitability worldwide, including pursuing other types of revenue streams and additional growth opportunities. As a result of this process, we will likely incur restructuring charges in future periods, however, we cannot predict the amount of such charges at this time.

Impairment Charges

Generally accepted accounting principles require us to perform at least an annual assessment for impairment of good will and other indefinite life intangible assets and to monitor events and changes in circumstances that could indicate carrying amounts of long-lived asset may not be recoverable. Due to the significant operating losses experienced by our Manipulator and Docking Hardware Product segment during 2007, combined with our forecasts that indicated potential future losses for this segment, we determined that our goodwill for this segment (which had resulted from prior acquisitions of our foreign subsidiaries in this segment) was fully impaired, resulting in a charge of $2.8 million, and that a charge of $535,000 for the impairment of certain property and equipment at our manufacturing facility in Cherry Hill was appropriate. Please refer to Note 2 of the footnotes to our consolidated financial statements for further discussion of this charge.

Excess and Obsolete Inventory Charges

On a quarterly basis, we review our inventories and record charges for excess and obsolete inventory based upon our established objective excess and obsolete inventory criteria. These criteria identify material that has not been used in a work order during the prior twelve months and the quantity of material on hand that is greater than the average annual usage of that material over the prior three years. In certain cases, additional excess and obsolete inventory charges are recorded based upon current industry conditions, anticipated product life cycles, new product introductions and expected future use of the inventory. The excess and obsolete inventory charges we record establish a new cost basis for the related inventory. See also the section entitled "Critical Accounting Policies."

We incurred charges for excess and obsolete inventory of $830,000, $431,000 and $1.0 million for the years ended December 31, 2007, 2006 and 2005, respectively. The level of these charges was based upon a variety of factors, including changes in demand for our products and new product designs. The increase in excess and obsolete inventory charges in 2007 reflects the reduced demand for certain of our products, primarily in our Manipulator and Docking Hardware and Tester Interface Product segments. See also the section entitled "Critical Accounting Policies."

During the years ended December 31, 2007, 2006 and 2005 we utilized $155,000, $335,000 and $239,000, respectively, of material in production that had been written off as obsolete in prior periods. When previously written off inventory material is used in production, it has a zero cost basis and as a result, has the impact of improving our gross margin in the period used. For the years ended December 31, 2007, 2006 and 2005, the use of previously obsoleted inventory materials did not materially change our gross margin.

Product Warranty Charges

We accrue product warranty charges quarterly, based upon our historical claims experience. In addition, from time to time, we accrue additional amounts based upon known product warranty issues, such as product retrofits. For the years ended December 31, 2007, 2006 and 2005, our product warranty charges (recoveries) were $(198,000), $378,000 and $549,000, or (0.4)%, 0.6% and 1.0% of net revenues, respectively. The downward trend in our product warranty charges has been driven by a number of factors including recent improvements in product quality. In addition, warranty claims are typically highest when new products are introduced, and during these years there were no significant sales of newly introduced product families in our Manipulator and Docking Hardware Product segment.

The level of our product warranty charges both in absolute dollars and as a percentage of net revenues is affected by a number of factors including the cyclicality of demand in the ATE industry, the prototype nature of much of our business, the complex nature of many of our products, the introduction of new product families which typically have higher levels of warranty claims than existing product families, and, at our discretion, providing warranty repairs or replacements to customers after the contracted warranty period has expired in order to promote strong customer relations. See also "Critical Accounting Policies."

Product/Customer Mix

Our three product segments each have multiple products that we design, manufacture and sell to our customers. The gross margin on each product we offer is impacted by a number of factors including the amount of intellectual property (such as patents) utilized in the product, the number of units ordered by the customer at one time, or the amount of inTEST designed and fabricated material included in our product compared with the amount of third-party designed and fabricated material included in our product. The weight of each of these factors, as well as the current market conditions, determines the ultimate sales price we can obtain for our products and the resulting gross margin.

The mix of products we sell in any period is ultimately determined by our customers' needs. Therefore, the mix of products sold in any given period can change significantly from the prior period. As a result, our consolidated gross margin can be significantly impacted in any given period by a change in the mix of products sold in that period.

We sell most of our products to semiconductor manufacturers and third-party test and assembly houses (end user sales) and to ATE manufacturers (OEM sales) who ultimately resell our equipment with theirs to semiconductor manufacturers. Our Temperature Management Product segment also sells into a variety of other industries including the aerospace, automotive, communications, consumer electronics, defense, and medical industries. The mix of customers during any given period will affect our gross margin due to differing sales discounts and commissions. For the years ended December 31, 2007, 2006 and 2005, our OEM sales as a percentage of net revenues were 21%, 23% and 22%, respectively.

OEM sales generally have a lower gross margin than end user sales, as OEM sales historically have had a more significant discount. Our current net operating margins on most OEM sales, however, are only slightly less than margins on end user sales because of the payment of third party sales commissions on most end user sales. We have also continued to experience demands from our OEM customers' supply line managers to reduce our sales prices to them. If we cannot further reduce our manufacturing and operating costs, these pricing pressures will continue to reduce our gross and operating margins.

Risk Factors

Please see Item 1A "Risk Factors" for a discussion of other important factors that could cause our results to differ materially from our prior results or those expressed or implied by our forward-looking statements.

Results of Operations

All of our products are used by semiconductor manufacturers in conjunction with ATE in the testing of ICs. Consequently, the results of operations for each product segment are generally affected by the same factors. Separate discussions and analyses for each product segment would be repetitive and obscure any unique factors that affected the results of operations of our different product segments. The discussion and analysis that follows, therefore, is presented on a consolidated basis for the Company as a whole and includes discussion of factors unique to each product segment where significant to an understanding of each segment.

The following table sets forth for the periods indicated the principal items included in the "Consolidated Statements of Operations" as a percentage of total net revenues.

Year Ended December 31, 2007 Compared to Year Ended December 31, 2006

Net Revenues. Net revenues were $48.7 million for 2007 compared to $62.3 million for 2006, a decrease of $13.6 million or 22%. During 2007, the net revenues (net of intersegment sales) of our Manipulator and Docking Hardware and Tester Interface Product segments decreased 37% and 7%, respectively, as compared to 2006, while the net revenues (net of intersegment sales) of our Temperature Management Product segment remained relatively unchanged. The decrease in our net revenues reflects lower levels of demand experienced in 2007 as compared to 2006 by our Manipulator and Docking Hardware and Tester Interface Product segments resulting from the factors previously discussed in the Overview. As previously discussed, sales of our temperature management products have not been as significantly affected as our other products by the changes in demand in the semiconductor industry, in part due to our ability to diversify sales.

Gross Margin. Gross margin was 39% for 2007 as compared to 42% for 2006. The decrease in gross margin was primarily the result of an increase in our fixed operating costs as a percentage of net revenues. Although the absolute dollar amount of these costs decreased $426,000 in 2007 as compared to 2006, they were not as fully absorbed during 2007 due to the lower net revenue levels as compared to 2006 which resulted in these costs increasing to 19% of net revenues in 2007 as compared to 16% of net revenues in 2006. The $426,000 decrease in fixed operating costs was primarily driven by reductions in insurance premiums, lower levels of depreciation, lower salaries and benefits expense and a reduction in facilities costs. The reduction in insurance premiums primarily reflects the reduction in the volume of business activity in 2007 as compared to 2006. The decrease in depreciation reflects a lower asset base as of December 31, 2007 compared to December 31, 2006. Salaries and benefits expense declined in 2007 as compared to 2006 as a result of headcount reductions during 2007, primarily in our Tester Interface Product segment. Facilities costs were lower in 2007 as compared to 2006 primarily as a result of lower utilities and related facilities costs for our temperature management operation in Sharon, Massachusetts combined with lower rent expense due to a reduction in the size of our facility in Cherry Hill, New Jersey, commencing in October 2007. These decreases were partially offset by fixed labor and overhead costs at our machine shops in Cherry Hill and Silicon Valley which were not as fully absorbed due to lower volume at these operations during 2007 as compared to 2006.

To a lesser extent, both direct labor and charges for excess and obsolete inventory increased as a percentage of net revenues in 2007 as compared to 2006. In absolute dollar terms, direct labor declined $47,000 during 2007 as compared to 2006 reflecting reduced headcount. However, similar to our fixed operating costs, as a result of the reduced revenue levels, these costs were not as fully absorbed in 2007 as compared to 2006. Charges for excess and obsolete inventory increased both in absolute dollar terms and as a percentage of net revenues during 2007 as compared to 2006. The $400,000 increase in the absolute dollar amount of these charges reflects that, as demand remains at reduced levels, more of our inventory is meeting the criteria we use to evaluate whether items in our inventory are excess or obsolete.

The increases in fixed operating costs, direct labor and excess and obsolete inventory charges as a percentage of net revenues were partially offset by a reduction in component material costs as a percentage of net revenues, reflecting changes in product and customer mix.

Selling Expense. Selling expense was $8.5 million for 2007 compared to $9.0 million for 2006, a decrease of $473,000 or 5%. The decrease was primarily driven by lower levels of warranty charges, reflecting favorable claims experience. To a lesser extent, there was also a reduction in fees paid to third parties for installation of our products at customer sites, primarily in Asia, and lower levels of commissions as a result of the lower sales levels. These decreases were partially offset by an increase in salary and benefits expense reflecting increased headcount, primarily at our Temperature Management and Manipulator and Docking Hardware Product segments.

Engineering and Product Development Expense. Engineering and product development expense was $5.5 million for 2007 compared to $5.9 million for 2006, a decrease of $400,000 or 7%. During 2006, we received $700,000 in reimbursement payments for engineering services under a contract with one of the customers of our Tester Interface Product segment. This reimbursement offset $379,000 of salary and benefits expense and expenditures for research and development materials incurred during 2006, as well as reimbursing $321,000 of development costs incurred in periods prior to the negotiation of this reimbursement contract. The reduction in engineering and product development costs in 2007 as compared to 2006 (after excluding the reimbursement of prior period costs from 2006) is primarily the result of lower salary and benefits expense, reflecting fewer staff, and a reduction in spending on research and development materials, reflecting fewer new product development projects in the prototype phase which require increased spending on research and development materials.

General and Administrative Expense. General and administrative expense was $8.3 million for 2007 compared to $8.0 million for 2006, an increase of $273,000 or 3%. The increase was primarily driven by an increase in salary and benefits expense which reflects both a $119,000 severance payment in 2007 to the former managing director of our Intestlogic operation as well as the restoration of salaries and benefits in the second and third quarters of 2006 that had been reduced in late 2004 and early 2005 as part of our cost containment initiatives during those years. This increase was partially offset by decreases in performance based compensation as a result of our overall and segment performance for 2007.

Impairment of Goodwill. During 2007, due to the significant operating losses experienced by our Manipulator and Docking Hardware Product segment, combined with our forecasts that indicated potential future losses for this product segment, we recorded a charge of $2.8 million for the full impairment of goodwill related to prior acquisitions made in this product segment. Please refer to Note 2 of the footnotes to our consolidated financial statements for further discussion of this charge. There was no similar charge in 2006.

Impairment of Long-Lived Assets. During 2007, due to the significant operating losses experienced by our Manipulator and Docking Hardware Product segment, combined with our forecasts that indicated potential future losses for this product segment, we recorded a charge of $535,000 for the partial impairment of certain long-lived assets. These long-lived assets consisted of property and equipment at our Cherry Hill manufacturing facility. Please refer to Note 2 of the footnotes to our consolidated financial statements for further discussion of this charge. There was no similar charge in 2006.

Restructuring and Other Charges. There were no restructuring and other charges in 2007. Restructuring and other charges were $23,000 for 2006. The restructuring and other charges recorded during 2006 related to finalizing the sub-lease agreement for the facility where our U.K. manufacturing operation was located prior to its closure in mid-2005. In connection with our current review, we will likely incur restructuring charges in the future, however, we cannot predict the amount at this time.

Other Income. Other income was $392,000 for 2007 compared to $470,000 for 2006, a decrease of $78,000. The decrease in other income was primarily due to an increase in foreign exchange losses. During 2006, we recorded a $167,000 foreign currency translation adjustment related to the final dissolution of our U.K. operation which was completed during the fourth quarter of 2006. This $167,000 gain offset the foreign exchange losses we incurred in 2006 in the normal operation of our business. There was no similar transaction in 2007. The increase in foreign exchange losses in 2007 as compared to 2006 was partially offset by an increase in interest income in 2007 as compared to 2006. The increase in interest income reflects higher average cash balances as well as an increase in the rate of interest being earned during 2007 by some of our operations.

Income Tax Expense. For 2007, we recorded income tax expense of $278,000 compared to $1.1 million for 2006. Our effective tax rate was (4)% for 2007 compared to 28% for 2006. Due to our history of operating losses in both our domestic and certain of our foreign operations, we have recorded a full valuation allowance against the deferred tax assets of these operations, including net operating loss carryforwards, where we believe it is more likely than not that we will not have sufficient taxable income to utilize these assets before they expire. During 2007, the income tax expense recorded primarily represents income tax expense on the taxable income of our foreign operations where we do not have a history of operating losses and therefore do not have net operating loss carryforwards to offset income tax expense on those earnings. The reduction in our effective tax rate for 2007 compared to 2006 reflects that the losses of our domestic operations and certain of our foreign operations represented a larger proportion of our total results for 2007 than in 2006.

Year Ended December 31, 2006 Compared to Year Ended December 31, 2005

Net Revenues. Net revenues were $62.3 million for 2006 compared to $53.4 million for 2005, an increase of $9.0 million or 17%. We believe the increase in our net revenues reflects the higher level of demand experienced in 2006, particularly in the second quarter of the year, compared to weaker cyclical demand during most of 2005. During 2006, the net revenues (net of intersegment sales) of our Manipulator and Docking Hardware, Temperature Management and Tester Interface Product segments increased 22%, 12% and 6%, respectively, as compared to 2005. We attribute the larger percentage increase in our Manipulator and Docking Hardware Product segment to the aforementioned strong demand for certain third-party products in Japan. In addition, we attribute the lower percentage increase in the net revenues of our Tester Interface Product segment to continued strong competition within this market as well as a more significant slowdown in the business of several of the major customers of this segment.

During 2006, our net revenues from customers in the U.S. and Asia increased 15% and 35%, respectively, while our net revenues from customers in Europe declined 5% over the comparable period in 2005. As previously mentioned, during 2005, we closed our U.K. manufacturing operation. When adjusted to exclude the sales of our U.K. operation in 2005, net revenues from customers in Europe increased 7% during 2006 as compared to 2005. The smaller percentage increase for our European customers reflects the fact that sales of temperature management products represent a higher percentage of our total European sales than of our domestic sales, and, as previously discussed, sales of our temperature management products have not been as significantly impacted by the changes in demand in the semiconductor industry. In addition, the lower percentage increase in sales to European customers can also be attributed to the fact that the sales of our Intestlogic operation in southern Germany increased only 4% in 2006 as compared to 2005. Sales of this subsidiary have also been less impacted by the changes in demand within the industry, decreasing only 5% in 2005 as compared to 2004. We believe this reflects strong customer acceptance of the products manufactured by this subsidiary. The higher percentage increase for our customers in Asia primarily reflects an increase in sales of third-party products by our Japanese subsidiary as well as increases in sales of temperature management products by our subsidiary in Singapore. In addition, some of the sales which would have historically been generated by our U.K. manufacturing operation were shifted to the operation in Singapore during 2006.

Gross Margin. Gross margin was 42% for 2006 as compared to 37% for 2005. The increase in gross margin was primarily the result of a reduction in our fixed operating costs both in absolute dollar terms and as a percentage of net revenues. To a lesser extent, we also had a reduction in charges for excess and obsolete inventory in 2006 as compared to 2005. In absolute dollar terms, our fixed operating costs decreased $386,000 during 2006 as compared to 2005. This decrease was primarily due to lower depreciation expense as a result of our lower fixed asset base as of December 31, 2006 compared to December 31, 2005. In addition, there was also a decrease in our insurance premiums which was a result of several factors including the lower fixed asset base, lower total average headcount for certain operations and the closure of our U.K. manufacturing operation. The decrease in our fixed operating costs in absolute dollar terms combined with the higher net revenue levels in 2006 as compared to 2005 led to the overall decrease in fixed operating costs as a percentage of net revenues from 19% in 2005 to 16% in 2006. Our excess and obsolete inventory charges totaled $431,000, or less than 1% of net revenues, for 2006 as compared to $1.0 million, or 2% of net revenues, for 2005. We attribute the reduction in excess and obsolete inventory charges primarily to our continued efforts to more closely manage our inventory levels and purchasing policies to minimize our risk in this area.

Selling Expense. Selling expense was $9.0 million for 2006 compared to $8.9 million for 2005, an increase of $27,000 or less than 1%. During 2006, there were increases in travel costs, fees paid to third parties for installation of our products at customer sites, primarily in Asia, and sales commissions. The increase in travel costs primarily reflects more overseas trips to visit various customers in Asia and Europe. The increase in installation costs primarily represents instances where our internal sales people were not available to perform an installation at a customer site. In these situations, our practice is to hire a third party to perform the installation for us. As our overseas business has grown, we have experienced more instances where we do not have internal sales personnel readily available to perform installations overseas. The increase in sales commissions reflects the increase in the level of sales during 2006 as compared to 2005. These increases were offset primarily by decreases in expenditures related to certain limited duration marketing programs that were in place in early 2005 in our Temperature Management Product segment, lower levels of product warranty expense, and a reduction in expenditures for demonstration equipment in 2006 as compared to 2005.

Engineering and Product Development Expense. Engineering and product development expense was $5.9 million for 2006 compared to $6.4 million for 2005, a decrease of $443,000 or 7%. We attribute the decrease primarily to the receipt of reimbursement payments totaling $700,000 during the first half of 2006 for engineering services under a contract with one of the customers of our Tester Interface Product segment. Under this contract we received payments based on achieving various milestones (as defined in the contract) related to specified product redesign activities. This contract ended during the second quarter of 2006. In addition, expenditures for third-party consultants decreased during 2006 as compared to 2005. These third-party consultants had been retained to assist in new product development efforts during 2005 for our Tester Interface Product segment. These decreases were offset primarily by higher salary and benefits expense and increased spending on research and development materials during 2006 as compared to 2005. The increase in salary and benefits expense was due to hiring additional staff at our Tester Interface and Temperature Management Product segments as well as the restoration of certain salaries and benefits. The increase in staff at our Tester Interface Product segment primarily related to the engineering services contract previously discussed. When this contract ended, certain staff members were either terminated or, in some cases, re-assigned to other projects. The increase in spending on research and development materials was related to various new product development projects primarily in our Temperature Management and Manipulator and Docking Hardware Product segments.

General and Administrative Expense. General and administrative expense was $8.0 million for 2006 compared to $7.4 million for 2005, an increase of $551,000 or 7%. The increase was primarily driven by an increase in salary and benefits expense which reflects the restoration of salaries and benefits in the second and third quarters of 2006, as previously mentioned, as well as the hiring of some additional staff. To a lesser extent, we incurred additional professional fees related to audit, tax and other compliance work where we utilize the assistance of third party professionals. The increase in these fees primarily reflects the growing number and complexity of the various accounting and other compliance matters that we encounter in the normal course of running our business. Finally, the amount of performance-based compensation we accrued in 2006 increased as compared to 2005 which reflects our positive results for 2006.

Restructuring and Other Charges. Restructuring and other charges were $23,000 for 2006 compared to $572,000 for 2005, a decrease of $549,000. The restructuring and other charges recorded during 2006 related to finalizing the sub-lease agreement for the facility where our U.K. manufacturing operation was located prior to its closure in mid-2005. The restructuring and other charges recorded during 2005 consisted of $234,000 in severance and related costs and $303,000 in lease termination costs resulting from the closure of this same operation. In addition, we incurred $35,000 in severance and related costs associated with a workforce reduction at our facility in San Jose, California in 2005.

Other Income. Other income was $470,000 for 2006 compared to $124,000 for 2005, an increase of $346,000. The increase primarily reflects higher interest income, which was the result of both higher average cash balances and an increase in the rate of return earned on such balances, combined with a reduction in foreign exchange transaction losses. The reduction in foreign exchange transaction losses was primarily the result of a $167,000 foreign currency translation adjustment related to the final dissolution of our U.K. operation which was completed during the fourth quarter of 2006.

Income Tax Expense. For 2006, we recorded income tax expense of $1.1 million compared to $236,000 for 2005. Our effective tax rate was 28% for 2006 compared to (7)% for 2005. Due to our history of operating losses in both our domestic and certain of our foreign operations, we have recorded a full valuation allowance against all domestic and certain foreign deferred tax assets, including net operating loss carryforwards, where we believe it is more likely than not that we will not have sufficient taxable income to utilize these assets before they expire. During 2006, the income tax expense recorded primarily represents income tax expense on the taxable income of our foreign operations where we do not have a history of operating losses and therefore do not have net operating loss carryforwards to offset income tax expense on those earnings. The increase in our effective tax rate during 2006 as compared to 2005 reflects that a higher proportion of our taxable income for 2006 was generated by our foreign operations where we do not have net operating loss carryforwards to offset income tax expense on those earnings. In addition, during 2005 we recorded an income tax benefit related to a domestic income tax refund we received during the year.

Liquidity and Capital Resources

Net cash used in operations was $600,000 for 2007 compared to net cash provided by operations of $6.4 million for 2006. The shift to cash used in operations in 2007 from cash provided by operations in 2006 was primarily the result of our $6.7 million net loss in 2007 as compared to net earnings of $2.9 million in 2006. The net loss in 2007 included non-cash charges of $2.8 million related to the impairment of goodwill and $535,000 related to the impairment of long-lived assets. During 2007, accounts receivable decreased $2.6 million, inventories decreased $1.2 million and accounts payable decreased $1.3 million, primarily reflecting the lower level of business activity experienced in 2007 as compared to 2006. Domestic and foreign income taxes payable decreased $778,000 compared to the amount at December 31, 2006 due to the payment during 2007 of income taxes on earnings generated in 2006 by certain of our foreign operations. In addition, these operations had lower accruals for tax expense in 2007 due to lower net earnings generated by these operations in 2007 as compared to 2006. During 2007, accrued warranty decreased $475,000 compared to the level at December 31, 2006 reflecting our favorable claims experience.

Purchases of property and equipment were $682,000 for 2007. These purchases primarily consisted of demonstration and quality assurance testing equipment for our facilities in Sharon, Massachusetts and San Jose, California and additional leasehold improvements for our facility in Cherry Hill, New Jersey. During 2007, we also purchased additional computer and other office equipment for our Intestlogic operation in Germany and a new vehicle for our Temptronic GmbH operation in Germany. During 2007, we received $66,000 in proceeds from the sale of certain machine shop equipment by our operation in

San Jose, California. We have no significant commitments for capital expenditures in 2008, however, depending upon changes in market demand, we may make such purchases as we deem necessary and appropriate.

Net cash provided by financing activities for 2007 was $9,000, which represents $17,000 of proceeds from the exercise of stock options and $8,000 in payments made under capital lease obligations.

On October 2, 2007, we amended the lease for our Cherry Hill facility to reduce the square footage leased by approximately 42,000 square feet, which represented approximately 34% of the total facility square footage. The annual lease cost for this space would have been approximately $264,000 for 2007 and under the terms of the original lease would have escalated annually through the end of the lease on August 31, 2010. The average annual cost savings through the end of the original lease term is approximately $274,000.

We have a secured credit facility that provides for maximum borrowings of $250,000. We have not utilized this facility to borrow any funds. Our usage consists of the issuance of letters of credit in the face amount of $250,000. We pay a quarterly fee of 1.5% per annum on the total amount of the outstanding letters of credit. The terms of the loan agreement require that we maintain a minimum level of $200,000 of domestic cash. This credit facility expires on September 30, 2008.

As of December 31, 2007 we had cash and cash equivalents of $12.2 million. We believe our cash balances will be sufficient to satisfy our cash requirements for the foreseeable future. Should the current downturn be prolonged, or should we utilize significant amounts of cash to implement our acquisition strategy, we may require additional debt or equity financing to meet working capital or capital expenditure needs. We cannot be certain that, if needed, we would be able to raise such additional financing or upon what terms such financing would be available.

New or Recently Adopted Accounting Standards

See Note 2 to the consolidated financial statements for information concerning the implementation and impact of new or recently adopted accounting standards.

Critical Accounting Policies

The preparation of consolidated financial statements in conformity with U.S. GAAP requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues, expenses and related disclosure of contingent assets and liabilities. On an on-going basis, we evaluate our estimates, including those related to inventories, long-lived assets, goodwill, identifiable intangibles, deferred income tax valuation allowances and product warranty reserves. We base our estimates on historical experience and on appropriate and customary assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Some of these accounting estimates and assumptions are particularly sensitive because of their significance to our consolidated financial statements and because of the possibility that future events affecting them may differ markedly from what had been assumed when the financial statements were prepared.

Inventory Valuation

Inventory is valued at standard cost, which approximates actual cost computed on a first-in, first-out basis, not in excess of market value. On a quarterly basis, we review our inventories and record excess and obsolete inventory charges based upon our established objective excess and obsolete inventory criteria. These criteria identify material that has not been used in a work order during the prior twelve months and the quantity of material on hand that is greater than the average annual usage of that material over the prior three years. In certain cases, additional charges for excess and obsolete inventory are recorded based upon current industry conditions, anticipated product life cycles, new product introductions and expected future use of the inventory. The charges for excess and obsolete inventory that we record establish a new cost basis for the related inventory. In 2007, we recorded an inventory obsolescence charge for excess and obsolete inventory of $830,000.

Long-Lived Asset Valuation

We assess the impairment of identifiable intangibles and long-lived assets whenever events or changes in circumstances indicate that the carrying value may not be recoverable. Factors we consider important which could indicate impairment include significant underperformance relative to expected historical or projected future operating results, significant changes in the manner of our use of the asset or the strategy for our overall business and significant negative industry or economic trends. When we determine that the carrying value of intangibles and/or long-lived assets may not be recoverable based upon the existence of one or more of the above indicators of impairment, we prepare projections of operations for our product segments where these intangibles and/or long-lived assets are associated. If the carrying value of the intangible assets and/or long-lived assets exceeds the undiscounted cash flows of our projections, then we would measure the impairment charge. We measure the impairment based on the excess of the carrying amount over the fair value of the assets. At December 31, 2007, identifiable intangibles and long-lived assets were $2.5 million. During 2007, we recorded a $535,000 charge for the partial impairment of certain long-lived assets at our Cherry Hill manufacturing facility. Please refer to Note 2 of the footnotes to our consolidated financial statements for further discussion of this charge.

Goodwill

At least annually, we review our goodwill for impairment by comparing the fair value of our reporting units to their carrying values. If the result of this analysis is that the carrying value of the reporting unit exceeds its fair value, then the fair value of the reporting unit is allocated to its identifiable tangible and intangible assets, resulting in an implied valuation of goodwill associated with the reporting unit. We would measure the impairment based on the difference between the implied valuation of the goodwill and its actual carrying value. During 2007, we recorded an impairment charge of $2.8 million for the full impairment of goodwill related to prior acquisitions made in our Manipulator and Docking Hardware Product reporting unit. Please refer to Note 2 of the footnotes to our consolidated financial statements for further discussion of this charge. As a result of this charge, we no longer have any goodwill on our balance sheet at December 31, 2007.

Income Taxes

Deferred tax assets are analyzed to determine if there will be sufficient taxable income in the future in order to realize such assets. We assess all of the positive and negative evidence concerning the realizability of the deferred tax assets, including our historical results of operations for the recent past and our projections of future results of operations, in which we make subjective determinations of future events. If, after assessing all of the evidence, both positive and negative, a determination is made that the realizability of the deferred tax assets is not more likely than not, we establish a deferred tax valuation allowance for all or a portion of the deferred tax assets depending upon the specific facts. If any of the significant assumptions were changed, materially different results could occur, which could significantly change the amount of the deferred tax valuation allowance established. As of December 31, 2007, due to our history of operating losses, we have a 100% valuation allowance against all deferred tax assets, including net operating loss carryforwards, where we believe it is more likely than not that we will not have sufficient taxable income to utilize these assets before they expire.

Product Warranty Accrual

In connection with the accrual of warranty costs associated with our products, we make assumptions about the level of product failures that may occur in the future. These assumptions are primarily based upon historical claims experience. Should the rate of future product failures significantly differ from historical levels, our accrued warranty reserves would need to be adjusted, and the amount of the adjustment could be material. At December 31, 2007, accrued warranty was $387,000 and we recorded recoveries related to product warranty of $(198,000) for the year then ended.

This disclosure is not required for a smaller reporting company.

Consolidated financial statements are set forth in this Report beginning at page F-1 and are incorporated by reference into this Item 8.

None.

CEO and CFO Certifications. Included with this Annual Report as Exhibits 31.1 and 31.2 are two certifications, one by each of our Chief Executive Officer and our Chief Financial Officer (the "Section 302 Certifications"). This Item 9A(T) contains information concerning the evaluations of our disclosure controls and procedures and internal control over financial reporting that are referred to in the Section 302 Certifications. This information should be read in conjunction with the Section 302 Certifications for a more complete understanding of the topics presented.

Evaluation of Our Disclosure Controls and Procedures. The SEC requires that as of the end of the year covered by this Report, our CEO and CFO must evaluate the effectiveness of the design and operation of our disclosure controls and procedures and report on the effectiveness of the design and operation of our disclosure controls and procedures.

"Disclosure controls and procedures" mean the controls and other procedures that are designed with the objective of ensuring that information required to be disclosed in our reports filed under the Securities Exchange Act of 1934 (the "Exchange Act"), such as this Report, is recorded, processed, summarized and reported within the time periods specified in the rules and forms promulgated by the SEC. Disclosure controls and procedures are also designed with the objective of ensuring that such information is accumulated and communicated to our management, including the CEO and CFO, as appropriate, to allow timely decisions regarding required disclosure.

Limitations on the Effectiveness of Controls. Our management, including the CEO and CFO, does not expect that our disclosure controls and procedures or our internal control over financial reporting will prevent all error and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, as opposed to absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within an entity have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the control. The design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions; over time, a system of controls may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected. Accordingly, our management has designed the disclosure controls and procedures to provide reasonable assurance that the objectives of the control system were met.

CEO/CFO Conclusions about the Effectiveness of the Disclosure Controls and Procedures. As required by Rule 13a-15(b), inTEST management, including our CEO and CFO, conducted an evaluation as of the end of the period covered by this Report, of the effectiveness of our disclosure controls and procedures. Based on that evaluation, our CEO and CFO concluded that, as of the end of the period covered by this Report, our disclosure controls and procedures were effective at the reasonable assurance level.

Management's Report on Internal Control over Financial Reporting. Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is defined in Rule 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934, as amended, as a process designed by, or under the supervision

of, our principal executive and principal financial officers and effected by the our board of directors, management and other personnel to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and includes those policies and procedures that:

Because of inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Management assessed the effectiveness of our internal control over financial reporting as of December 31, 2007. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control-Integrated Framework. Based upon this assessment, management believes that, as of December 31, 2007, our internal control over financial reporting is effective at a reasonable assurance level.

This annual report does not include an attestation report of our independent registered public accounting firm regarding internal control over financial reporting. Management's report was not subject to attestation by our independent registered public accounting firm pursuant to temporary rules of the Securities and Exchange Commission that permit us to provide only management's report in this annual report.

None.

The information required by this Item is incorporated by reference from our definitive proxy statement for our 2008 Annual Meeting of Stockholders to be filed with the SEC on or before April 29, 2008, or, if our proxy statement is not filed on or before April 29, 2008, will be filed by that date by an amendment to this Form 10-K.

The information required by Item 201(d) of Regulation S-K is set forth below. The remainder of the information required by this Item 12 is incorporated by reference from our definitive proxy statement for our 2008 Annual Meeting of Stockholders to

be filed with the SEC on or before April 29, 2008, or, if our proxy statement is not filed on or before April 29, 2008, will be filed by that date by an amendment to this Form 10-K.

The following table shows the number of securities that may be issued pursuant to our equity compensation plans (including individual compensation arrangements) as of December 31, 2007:

The information required by this Item is incorporated by reference from our definitive proxy statement for our 2008 Annual Meeting of Stockholders to be filed with the SEC on or before April 29, 2008, or, if our proxy statement is not filed on or before April 29, 2008, will be filed by that date by an amendment to this Form 10-K.

The information required by this Item is incorporated by reference from our definitive proxy statement for our 2008 Annual Meeting of Stockholders to be filed with the SEC on or before April 29, 2008, or, if our proxy statement is not filed on or before April 29, 2008, will be filed by that date by an amendment to this Form 10-K.

(b)     Exhibits required by Item 601 of Regulation S-K:

We are an independent designer, manufacturer and marketer of manipulator and docking hardware, temperature management and tester interface products that are used by semiconductor manufacturers in conjunction with automatic test equipment ("ATE") in the testing of integrated circuits ("ICs" or "semiconductors").

The consolidated entity is comprised of inTEST Corporation (parent) and our wholly-owned subsidiaries. We manufacture our products in the U.S., Germany and Singapore. Marketing and support activities are conducted worldwide from our facilities in the U.S., the U.K., Germany, Japan and Singapore. We have three reportable segments which are also our reporting units: Manipulator and Docking Hardware, Temperature Management and Tester Interface.

The semiconductor industry in which we operate is characterized by rapid technological change, competitive pricing pressures and cyclical market patterns. This industry is subject to significant economic downturns at various times. Our financial results are affected by a wide variety of factors, including, but not limited to, general economic conditions worldwide or in the markets in which we operate, economic conditions specific to the semiconductor industry, our ability to safeguard patents and intellectual property in a rapidly evolving market, downward pricing pressures from customers, and our reliance on a relatively few number of customers for a significant portion of our sales. In addition, we are exposed to the risk of obsolescence of our inventory depending on the mix of future business and technological changes within the industry. As a result of these or other factors, we may experience significant period-to-period fluctuations in future operating results.

Notes receivable are due from trade customers in Japan and have original maturities of less than six months. The notes are non-interest bearing. Notes receivable were $0 and $163 at December 31, 2007 and 2006, respectively. Cash flows from accounts and notes receivable are recorded in operating cash flows.

Fair Value of Financial Instruments

Our financial instruments, principally accounts and notes receivable and accounts payable, are carried at cost which approximates fair value, due to the short maturities of the accounts. The estimated fair values of our capital lease obligations approximate their carrying value based upon the rates offered to us for similar type arrangements.

Inventories

Inventory is valued at standard cost, which approximates actual cost computed on a first-in, first-out basis, not in excess of market value. Cash flows from the sale of inventory are recorded in operating cash flows. On a quarterly basis, we review our inventories and record excess and obsolete inventory charges based upon our established objective excess and obsolete inventory criteria. These criteria identify material that has not been used in a work order during the prior twelve months and the quantity of material on hand that is greater than the average annual usage of that material over the prior three years. In certain cases, additional excess and obsolete inventory charges are recorded based upon current industry conditions, anticipated product life cycles, new product introductions and expected future use of the inventory. The charges for excess and obsolete inventory we record establish a new cost basis for the related inventory. We incurred excess and obsolete inventory charges of $830, $431 and $1,044 for the years ended December 31, 2007, 2006 and 2005, respectively.

Property and Equipment

Machinery and equipment are stated at cost. Depreciation is based upon the estimated useful life of the assets using the straight-line method. The estimated useful lives range from two to seven years. Leasehold improvements are recorded at cost and amortized over the shorter of the lease term or the estimated useful life of the asset. Total depreciation expense, including amortization of assets acquired under capital leases, was $1,255, $1,431 and $1,824 for the years ended December 31, 2007, 2006 and 2005, respectively. Expenditures for maintenance and repairs are charged to operations as incurred.

Impairment of Long-Lived Assets

In accordance with Statement of Financial Accounting Standards ("SFAS") No. 144, Accounting for the Impairment or Disposal of Long-Lived Assets, we continually monitor events and changes in circumstances that could indicate carrying amounts of long-lived assets may not be recoverable. When such events or changes in circumstances occur, we assess the recoverability of long-lived assets by determining whether the carrying value of such assets will be recovered through undiscounted expected future cash flows. If the total of the undiscounted future cash flows is less than the carrying amount of those assets, we would measure the impairment and recognize an impairment loss based on the excess of the carrying amount over the fair value of the assets.

In the quarter ended December 31, 2007, due to the significant operating losses experienced by our Manipulator and Docking Hardware Product segment during 2007, combined with our forecasts that indicated potential future losses for this product segment, we performed an assessment of the recoverability of the carrying value of this product segment's long-lived assets. As a result of this analysis we determined that certain property and equipment at our Cherry Hill manufacturing operation, which is the headquarters for the Manipulator and Docking Hardware Product segment, was impaired, and, accordingly, we recorded a $535 charge for the impairment of these long-lived assets during the fourth quarter of 2007.

Goodwill

In accordance with SFAS No. 142, Goodwill and Other Intangible Assets, goodwill and other indefinite life intangible assets are no longer subject to amortization. Instead, they are subject to at least an annual assessment for impairment by applying a fair value based test. During December 2007 and 2006, we assessed our goodwill for impairment in accordance with the requirements of SFAS No. 142. In December 2006, we determined that no impairment existed. In December 2007, due to the significant operating losses experienced by our Manipulator and Docking Hardware reporting unit during 2007, combined with our forecasts that indicated potential future losses for this reporting unit, we determined that the fair value of the reporting unit

was less than its carrying value. We determined that the carrying value of goodwill exceeded the implied fair value of goodwill and therefore our goodwill was fully impaired. Our goodwill resulted from prior acquisitions of our foreign subsidiaries in this reporting unit. As a result of this impairment, we recorded a charge of $2,848.

Changes in the amount of the carrying value of goodwill for the years ended December 31, 2007 and 2006 are as follows:

process to determine that they comply with specifications prior to shipment to a customer. To the extent that any sales agreements contain customer-specific acceptance criteria, revenue recognition is deferred until customer acceptance.

With respect to sales tax collected from customers and remitted to governmental authorities, we use a net presentation in our consolidated statement of operations. As a result, there are no amounts included in either our net revenues or cost of revenues related to sales tax.

Product Warranties

We generally provide product warranties and record estimated warranty expense at the time of sale based upon historical claims experience. Warranty expense is included in selling expense in the consolidated financial statements.

Engineering and Product Development

Engineering and product development costs, which consist primarily of the salary and related benefits costs of our technical staff, as well as the cost of materials used in product development, are expensed as incurred.

Restructuring and Other Charges

We recognize a liability for restructuring costs at fair value only when the liability is incurred. Workforce-related charges are accrued when it is determined that a liability has been incurred, which is generally after individuals have been notified of their termination dates and expected severance benefits. Plans to consolidate excess facilities result in charges for lease termination fees and future commitments to pay lease charges, net of estimated future sub-lease income. We recognize charges for consolidation of excess facilities when we have vacated the premises. Assets that may be impaired as a result of restructuring consist of property and equipment. Asset impairment charges included in restructuring and other charges are based on an estimate of the amounts and timing of future cash flows related to the expected future remaining use and ultimate sale or disposal of the asset. These estimates are derived using the guidance of SFAS No. 146, Accounting for Exit or Disposal Activities, and SFAS No. 144, Accounting for the Impairment of Disposal of Long Lived Assets.

Foreign Currency

The accounts of our foreign subsidiaries are translated in accordance with SFAS No. 52, Foreign Currency Translation, which requires that assets and liabilities of international operations be translated using the exchange rate in effect at the balance sheet date. The results of operations are translated using an average exchange rate for the period. The effects of rate fluctuations in translating assets and liabilities of international operations into U.S. dollars are included in accumulated other comprehensive earnings (loss) in stockholders' equity. Transaction gains or losses are included in net earnings (loss). For the years ended December 31, 2007, 2006 and 2005, foreign currency transaction gains (losses) were $(187), $23 and $(134). The amount recorded in 2006 includes a $167 foreign currency translation adjustment related to the final dissolution of our subsidiary located in the U.K. as more fully discussed in Note 10.

Income Taxes

The asset and liability method is used in accounting for income taxes. Under this method, deferred tax assets and liabilities are recognized for operating loss and tax credit carryforwards and for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in the results of operations in the period that includes the enactment date. A valuation allowance is recorded to reduce the carrying amounts of deferred tax assets if it is more likely than not that such assets will not be realized.

Net Earnings (Loss) Per Common Share

Net earnings (loss) per common share is computed in accordance with SFAS No. 128, Earnings Per Share. Basic earnings (loss) per common share is computed by dividing net earnings (loss) by the weighted average number of common shares outstanding during each year. Diluted earnings (loss) per common share is computed by dividing net earnings (loss) by the weighted average number of common shares and common share equivalents outstanding during each year.

Common share equivalents represent stock options and unvested shares of restricted stock and are calculated using the treasury stock method. Common share equivalents are excluded from the calculation if their effect is anti-dilutive.

A reconciliation of weighted average common shares outstanding -- basic to weighted average common shares outstanding -- diluted appears below:

not restated, the cumulative effect adjustment is recorded in opening accumulated earnings (deficit) as of the beginning of the fiscal year of adoption. SAB 108 was effective for fiscal years ending on or after November 15, 2006. The adoption of SAB 108 did not have a material impact on our consolidated financial position, results of operations or cash flows.

On January 1, 2007, we adopted FASB Interpretation No. 48 ("FIN 48"), Accounting for Uncertainty in Income Taxes - an interpretation of FASB Statement No. 109. FIN 48 provides guidance for the recognition and measurement of uncertain tax positions in an enterprise's financial statements. When tax returns are filed, it is highly certain that some positions taken would be sustained upon examination by the taxing authorities, while others are subject to uncertainty about the merits of the position taken or the amount of the position that would ultimately be sustained. The benefit of a tax position is recognized in the financial statements in the period during which, based on all available evidence, management believes it is more-likely-than not that the position will be sustained upon examination, including the resolution of appeals or litigation processes, if any. The evaluation of a tax position taken is considered by itself and not offset or aggregated with other positions. Tax positions that meet the more-likely-than-not recognition threshold are measured as the largest amount of tax benefit that is more than 50 percent likely of being realized upon settlement with the applicable taxing authority. The portion of the benefits associated with tax positions taken that exceeds the amount measured as described above is reflected as a liability for unrecognized tax benefits in the accompanying balance sheet along with any associated interest and penalties that would be payable to the taxing authorities upon examination. See Note 11 for further disclosures related to the adoption of FIN 48.

In May 2007, the FASB issued FASB Staff Position ("FSP") FIN 48-1, Definition of Settlement in FASB Interpretation No. 48 ("FSP FIN 48-1"). FSP FIN 48-1 provides guidance on how to determine whether a tax position is effectively settled for the purpose of recognizing previously unrecognized tax benefits. FSP FIN 48-1 was effective retroactively to January 1, 2007. The implementation of this standard did not have a material impact on our consolidated financial position, results of operations or cash flows.

On January 1, 2007, we adopted Emerging Issues Task Force Issue No. 06-3 ("EITF 06-3"), How Sales Taxes Collected From Customers and Remitted to Governmental Authorities Should Be Presented in the Income Statement. EITF 06-3 requires a company to disclose its accounting policy (i.e. gross vs. net basis) relating to the presentation of taxes within the scope of EITF 06-3. Furthermore, for taxes reported on a gross basis, an enterprise should disclose the amounts of those taxes in interim and annual financial statements for each period for which an income statement is presented. The guidance was effective for all periods beginning after December 15, 2006. The adoption of EITF 06-3 did not have any impact on our consolidated financial position, results of operations or cash flows.

New Accounting Standards

In September 2006, the FASB issued SFAS No. 157, Fair Value Measurements. SFAS 157 defines fair value, establishes a framework for measuring fair value and expands disclosure of fair value measurements. SFAS 157 applies under other accounting pronouncements that require or permit fair value measurements and accordingly, does not require any new fair value measurements. SFAS 157 is effective for financial statements issued for fiscal years beginning after November 15, 2007. In February 2008, the FASB issued FSP No. FAS 157-2, Effective Date of FASB Statement No. 157 which defers the effective date of SFAS 157 to fiscal years beginning after November 15, 2008 for nonfinancial assets and nonfinancial liabilities, except for items that are recognized or disclosed at fair value in the financial statements on a recurring basis (at least annually).We are currently in the process of assessing the impact the adoption of SFAS 157 will have on our consolidated financial statements.

In February 2007, the FASB issued SFAS No. 159, The Fair Value Option for Financial Assets and Financial Liabilities. SFAS 159 permits companies to elect to measure certain financial instruments at fair value on an instrument-by-instrument basis, with changes in fair value recognized in earnings each reporting period. In addition, SFAS 159 establishes financial statement presentation and disclosure requirements for assets and liabilities reported at fair value under the election. SFAS 159 is effective as of the beginning of the first fiscal year beginning after November 15, 2007. We are currently in the process of assessing the impact the adoption of SFAS 159 will have on our consolidated financial statements.

In December 2007, the FASB issued SFAS No. 141(revised), Business Combinations. SFAS 141(R) significantly changes the accounting for business combinations in a number of areas including the treatment of contingent consideration, preacquisition contingencies, transaction costs, in-process research and development and restructuring costs. SFAS 141(R) is effective as of the beginning of the first fiscal year beginning after December 15, 2008 and early adoption is prohibited. We will adopt SFAS 141(R) beginning in the first quarter of fiscal 2009. SFAS 141(R) will change our accounting for business combinations on a prospective basis.

Texas Instruments Incorporated accounted for 20%, 19% and 16% of our consolidated net revenues in 2007, 2006 and 2005, respectively. While all three of our operating segments sold to this customer, these revenues were primarily generated by our Manipulator and Docking Hardware and Tester Interface Product segments. During the years ended December 31, 2007, 2006 and 2005, no other customer accounted for 10% or more of our consolidated net revenues.

Inventories held at December 31 were comprised of the following:

Other accrued expenses consist of the following:

Line of Credit

As of December 31, 2007, we had a secured credit facility which provided for maximum borrowings of $250. We have not utilized this facility to borrow any funds. Our only usage consists of the issuance of two letters of credit which are outstanding as of December 31, 2007 in the face amounts of $200 and $50, respectively. We pay a quarterly fee of 1.5% per annum on the total amount of the outstanding letters of credit. The terms of the credit facility require that we maintain a minimum level of $200 of cash with the bank. This credit facility expires on September 30, 2008.

Letters of Credit

As of December 31, 2007 and 2006, we had an outstanding letter of credit in the amount of $200. This letter of credit was originally issued in December 2000 as a security deposit under a lease that our Temptronic subsidiary entered into for its new facility in Sharon, Massachusetts. This letter of credit expires January 1, 2009; however, the terms of the lease require that the letter of credit be renewed at least thirty days prior to its expiration date for successive terms of not less than one year throughout the entire lease term, which ends February 28, 2011.

As of December 31, 2007 and 2006, we also had an outstanding letter of credit in the amount of $50. This letter of credit was issued in September 2004 as a portion of the security deposit under a lease that we entered into for a new facility for our tester interface operation based in northern California. We occupied this facility in late January 2005. This letter of credit expires September 13, 2008, however, the terms of the lease require that the letter of credit be renewed at least thirty days prior to its expiration date for successive terms of not less than one year until June 30, 2012, which is sixty days after the expiration of the lease term. If as of December 31, 2008, there have been no events of default or late payments of rent, the letter of credit shall be reduced to $0 upon our request.

Capital Lease Obligations

Periodically we enter into capital lease agreements to finance equipment purchases. The minimum lease payments under the capital leases in effect at December 31, 2007 are as follows:

In accordance with FASB Technical Bulletin No. 88-1, Issues Relating to Accounting for Leases, we record tenant improvements made to our leased facilities based on the amount of the total cost to construct the improvements regardless of whether a portion of that cost was paid through an allowance provided by the facility's landlord. The amount of the allowance, if any, is recorded as deferred rent. We amortize deferred rent on a straight-line basis over the lease term and record the amortization as a reduction of rent expense.

In addition, certain of our operating leases contain predetermined fixed escalations of minimum rentals during the original lease terms. For these leases, we recognize the related rental expense on a straight-line basis over the life of the lease and record the difference between the amounts charged to operations and amounts paid as accrued rent which is included in other accrued expenses on our balance sheet.

During 2005, we recorded $854 of additions to our leasehold improvements which were paid for on our behalf by the landlord of our facility in San Jose, California. We occupied this facility during the first quarter of 2005. We also recorded this amount as deferred rent. Amortization of deferred rent for the years ended December 31, 2007, 2006 and 2005 was $118, $118 and $107, respectively.

Operating Lease Commitments

We lease our offices, warehouse facilities, automobiles and certain equipment under noncancellable operating leases which expire at various dates through 2012. Total rental expense for the years ended December 31, 2007, 2006 and 2005 was $1,787, $1,839 and $1,855, respectively.

The aggregate minimum rental commitments under the noncancellable operating leases in effect at December 31, 2007 are as follows:

Product Warranties

Warranty expense (recovery) for the years ended December 31, 2007, 2006 and 2005 was $(198), $378 and $549, respectively. During 2007, we recorded a reduction in our consolidated warranty accrual reflecting favorable claims experience. The following table sets forth the changes in the liability for product warranties for the years ended December 31, 2007 and 2006:

U.K. Operation Closure

In March 2005, we announced our intention to close our U.K. operation, and we ceased manufacturing operations at this facility during the second quarter of 2005. During 2005, we accrued $234 for severance and related costs and $303 for lease termination costs. The $205 accrual remaining at December 31, 2005 related primarily to estimated lease termination costs. In November 2006, we entered into an agreement to sub-lease this facility. During the fourth quarter of 2006, we recorded an additional $23 of lease termination costs as a result of finalizing this sub-leasing arrangement as well as a $167 foreign currency translation adjustment related to final dissolution of this operation. As of December 31, 2007, there are no accruals remaining related to the closure of our U.K. operation as all aspects of the closure are now complete. However, as a part of the sub-lease agreement we have made certain guarantees as more fully described in Note 9. Our U.K. operation was included in our Manipulator and Docking Hardware Product segment.

California Workforce Reduction

In the quarter ended September 30, 2005 we accrued $35 for severance and related costs resulting from the termination of six employees at our facility in San Jose, California. This entire amount was paid out during the third quarter of 2005. Our facility in San Jose is the headquarters for our Tester Interface Product segment.

There were no restructuring and other costs for 2007. Our restructuring and other costs for 2006 and 2005 are summarized as follows:

We are subject to Federal and certain state income taxes. In addition, we are taxed in certain foreign countries. The cumulative amount of undistributed earnings of certain of our foreign subsidiaries which we consider to be permanently reinvested and, as a result, for which U.S. income taxes have not been provided was $616, $2,001 and $950 at December 31, 2007, 2006 and 2005, respectively.

Income (loss) before income taxes was as follows:

Income tax expense was as follows:

the scheduled reversal of deferred tax liabilities, projected future taxable income and tax planning strategies in making this assessment. In order to fully realize the total deferred tax assets, we will need to generate future taxable income prior to the expiration of net operating loss and credit carryforwards which expire in various years through 2027. Based upon the level of historical taxable income and projections for future taxable income over the periods in which the temporary differences are deductible, we believe it is more likely than not that we will not realize the benefit of the deferred tax asset and, as a result, have recorded a full valuation allowance at December 31, 2007.

An analysis of the effective tax rate for the years ended December 31, 2007, 2006 and 2005 and a reconciliation from the expected statutory rate of 34% is as follows:

From time to time we may be a party to legal proceedings occurring in the ordinary course of business. We are not currently involved in any legal proceedings the resolution of which we believe could have a material effect on our business, financial position, results of operations or long-term liquidity.

On June 30, 2005, in connection with the closing of our U.K. manufacturing operation, we sold certain assets of this operation, including the machine shop assets, to the then managing director of our U.K. manufacturing operation for $132. In connection with this transaction, we took back a $132 note receivable with a five-year term with interest payable quarterly at the rate of

4.5%. During 2006, we advanced an additional $26 to this individual under this note receivable arrangement. At December 31, 2007 and 2006, the balance outstanding under this note receivable was $135 and $125, respectively. In addition, as of January 1, 2006, we have entered into a lease agreement for office space in a building which is owned by this individual. This office space is for our marketing and support personnel who are based in the U.K. The lease agreement is for a term of five years with rent payable at the rate of $23 per year.

As of December 31, 2007, we have outstanding stock options and unvested restricted stock awards granted under the Amended and Restated 1997 Stock Plan (the "1997 Stock Plan") as well as under the inTEST Corporation 2007 Stock Plan (the "2007 Stock Plan"). As of March 31, 2007, no additional stock options or shares of restricted stock may be granted under the 1997 Plan.

The 2007 Stock Plan was approved at our annual meeting of stockholders held on June 13, 2007, upon the recommendation of our Board of Directors. The 2007 Stock Plan permits the granting of stock options or restricted stock, for up to 500,000 shares of our common stock, to officers, other key employees and consultants. A description of the 2007 Stock Plan, including the full text of the 2007 Stock Plan, is contained in the proxy statement for our 2007 annual meeting of stockholders.

As previously mentioned in Note 2, "Recently Adopted Accounting Standards," on January 1, 2006, we adopted SFAS No. 123R. The adoption of SFAS No. 123R did not have a material impact on our results of operations, financial condition or cash flows as we had no unvested stock options outstanding as of December 31, 2005. Our unvested restricted stock awards outstanding are accounted for based on their grant date fair value. As of December 31, 2007, total compensation expense to be recognized in future periods was $835. All of this expense is related to nonvested shares of restricted stock. The weighted average period over which this expense is expected to be recognized is 2.7 years. We have not granted any stock options during 2006 or 2007.

Stock Options

Prior to the adoption of SFAS No. 123R, we used the intrinsic value method prescribed by APB Opinion No. 25 to account for stock options and provided proforma disclosures, as required under SFAS No. 123, as amended by SFAS No. 148, Accounting for Stock-Based Compensation - Transition and Disclosures. Under the intrinsic value method, no stock-based employee compensation cost was reflected in the statement of operations when options granted under our stock-based employee compensation plans had an exercise price equal to the market value of the underlying common stock on the date of grant.

The following table illustrates the effect on net earnings (loss) and net earnings (loss) per share for the year ended December 31, 2005 if we had applied the fair value recognition provisions of SFAS No. 123 to stock-based employee compensation: