KEY TRONIC CORP - Annual Report: 2007 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

For the fiscal year ended June 30, 2007

OR

For the transition period from              to             

Commission File Number 0-11559

KEY TRONIC CORPORATION

(Exact name of registrant as specified in its charter)

(509) 928-8000

Registrant’s telephone number, including area code)

N/A

(Former name, former address and former fiscal year, if changed since last report)

Securities Registered Pursuant to Section 12(b) of the Act: None

Securities Registered Pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Exchange Act.

Large accelerated filer  ¨    Accelerated filer  ¨    Non-accelerated filer  x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

State the aggregate market value of the voting and non-voting common equity held by non affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant’s most recently completed second fiscal quarter. As of December 31, 2006, the aggregate market value of the registrant’s common stock held by non-affiliates of the registrant was $40.6 million based on the closing price as reported on the NASDAQ.

Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the latest practicable date: 9,921,045 shares of common stock were outstanding as of September 3, 2007.

Documents Incorporated by Reference:

The following documents are incorporated by reference to the extent specified herein:

Table of Contents

KEY TRONIC CORPORATION

2007 FORM 10-K

TABLE OF CONTENTS

2

Table of Contents

FORWARD-LOOKING STATEMENTS

This Annual Report contains forward-looking statements in addition to historical information. Forward-looking statements are subject to certain risks and uncertainties that could cause actual results to differ materially from those reflected in the forward-looking statements. Risks and uncertainties that might cause such differences include, but are not limited to those outlined in “Management’s Discussion and Analysis of Financial Condition and Results of Operations—Risks and Uncertainties that May Affect Future Results.” Readers are cautioned not to place undue reliance on forward-looking statements, which reflect management’s opinions only as of the date hereof. The Company undertakes no obligation to update forward-looking statements to reflect developments or information obtained after the date hereof and disclaims any obligation to do so. Readers should carefully review the risk factors described in periodic reports the Company files from time to time with the Securities and Exchange Commission, including Quarterly Reports on Form 10-Q and Current Reports on Form 8-K.

PART I

Overview

Key Tronic Corporation (dba KeyTronicEMS Co.), a Washington corporation organized in 1969, and its subsidiaries (hereinafter collectively called the “Company”, “Key Tronic”, or “we” unless the context otherwise requires) are principally engaged in electronic manufacturing services (EMS) and consumer related products manufacturing for original equipment manufacturers (OEMs). The Company also manufactures keyboards and other input devices for personal computers primarily in standard layouts that can be sold directly from inventory on hand.

Key Tronic is known as an independent provider of product realization services for OEMs in a variety of industries. Historically, Key Tronic was principally a manufacturer of electronic keyboards, but after assessing market conditions and the Company’s strengths and capabilities, approximately eight years ago the Company shifted its strategy to focus on EMS. The EMS industry is comprised of companies that provide a range of manufacturing services for OEMs. The EMS industry has experienced growth over the past several years as more OEMs look to outsource manufacturing, and this trend is expected to continue in the future.

Operations are currently conducted in facilities in the United States, Mexico and China. The Company’s global production capability provides customers with benefits of improved supply-chain management, reduced inventory, lower labor costs, lower transportation costs and reduced product fulfillment time.

Marketing

The Company provides a mix of manufacturing services for outsourced OEM products. Key Tronic provides the following EMS services: product design, surface mount technologies (SMT) for printed circuit board assembly, tool making, precision plastic molding, liquid injection molding, automated tape winding, prototype design, full product builds, and printing screened silver flexible circuit membranes.

Revenues from EMS services for the fiscal years ended June 30, 2007, July 1, 2006, and July 2, 2005 were 97.2%, 96.4% and 95.0%, respectively. Sales of the majority of the Company’s products have historically not been seasonal in nature, but may be seasonal in the future, if there are changes in the types of products manufactured. Sales can however, fluctuate significantly between quarters from changes in customers’ demand due to the Company’s concentration in specific customers.

The following customers accounted for 10% or more of consolidated revenues in the three fiscal years presented below:

For the fiscal years ended June 30, 2007, July 1, 2006, and July 2, 2005, the five largest customers in each year accounted for 73%, 71% and 68% of total sales, respectively. The Company’s new customer program wins may dilute its concentration of revenue to its current top five customers in the future.

Although keyboard manufacturing is still included in the Company’s product offerings, annual keyboard sales continue to decline. During the fiscal years ended June 30, 2007, July 1, 2006, and July 2, 2005, the Company realized revenues of approximately $5.6

3

Table of Contents

million, $7.3 million and $10.1 million, respectively, from the sale of keyboards. In order to accommodate the demand for standard keyboard layouts, the Company maintains a purchase-from-stock program. The more popular standard layouts are built and stocked for immediate availability.

The Company markets its products and services primarily through its direct sales department aided by strategically located field sales people and distributors. Although the Company maintains relationships with several independent sales organizations to assist in marketing the Company’s EMS product lines, commissions earned and paid are not material to the consolidated financial statements.

Manufacturing

Since inception, the Company has made substantial investments in developing and expanding a capital equipment base to achieve selective vertical integration and efficiencies in its manufacturing processes. The Company has invested significant capital into SMT for volume manufacturing of complex printed circuit board assemblies. The Company also designs and develops tooling for injection molding and manufactures the majority of plastic parts used in the products it manufactures. Additionally, the Company has equipment to produce printed flexible circuit membranes.

Key Tronic uses a variety of manual and highly automated assembly processes in its facilities, depending upon product complexity and degree of customization. Automated processes include component insertion, SMT, flexible robotic assembly, automated storage tape winding, computerized vision system quality inspection, automated switch and key top installation, and automated functional testing.

The Company’s automated manufacturing processes enable it to work closely with its customers during the design and prototype stages of production and to jointly increase productivity and reduce response time to the marketplace. Key Tronic uses computer-aided design techniques and unique software to assist in preparation of the tool design layout and tool fabrications, to reduce tooling costs, improve component and product quality, and enhance turnaround time during product development.

The Company purchases materials and components for its products from many different suppliers, including both domestic and international sources. Key Tronic develops close working relationships with its suppliers, many of whom have been supplying products to the Company for several years.

Research, Development, and Engineering

Research, development, and engineering (RD&E) expenses consist principally of employee related costs, third party development costs, program materials costs, depreciation and allocated information technology and facilities costs. The Company’s RD&E expenses were $3.2 million, $2.8 million and $2.9 million in fiscal years 2007, 2006, and 2005, respectively. In each of these years, the Company focused most of its RD&E efforts on current customer EMS programs. The recent increase in RD&E during fiscal 2007 is related to the Company hiring additional program managers and engineers to transition and manage new customer program wins.

Competition

The market for the products and services the Company provides is highly competitive. There are numerous competitors in the EMS industry, many of which have substantially more resources and are more geographically diverse than Key Tronic. Key Tronic competes primarily on the basis of responsiveness, creativity, vertical production capability, quality, and price.

Trademarks and Patents

The Key Tronic name and logo are federally registered trademarks, and the Company believes they are valuable assets of its business. During 2001, Key Tronic began operating under the trade name “KeyTronicEMS Co.” to better identify its primary business concentration. The Company also owns several keyboard patents; however, since the Company’s focus is EMS, management believes that these patents will not have a significant impact on future revenues.

Employees

As of June 30, 2007, the Company had 2,227 employees compared to 2,840 on July 1, 2006 and 2,849 on July 2, 2005. Since the Company can have significant fluctuations in product demand, it seeks to maintain flexibility in its workforce by utilizing skilled temporary and short-term contract labor in its manufacturing facilities in addition to full-time employees. The reduction in the number of employees at the end of fiscal 2007 was a result of a change in product mix that now requires less hand assembly and a reduction in forecasted sales revenue in the first quarter of 2008. The Company’s employees in Reynosa, Mexico, which represent

4

Table of Contents

approximately 10% of the Company’s employees, are represented by a local union. The Company has no history of any material interruption of production due to labor disputes.

The Company considers its employees its primary strength and makes considerable efforts to maintain a well-qualified staff. The Company’s employee benefits include bonus programs involving periodic payments to all employees based on meeting quarterly or fiscal year performance targets. The Company regularly provides transportation, medical services and meals to all of its employees in foreign locations. The Company maintains a 401(k) plan for U.S. employees, which provides a matching company contribution of up to 4% of an employee’s salary, and also provides group health, life, and disability insurance plans. The Company also maintains stock option plans and other long term incentive plans for certain employees and outside directors.

Backlog

On July 28, 2007, the Company had an order backlog of approximately $34.1 million. This compares with a backlog of approximately $66.2 million on July 29, 2006. Order backlog is not necessarily indicative of future sales but can be indicative of trends in expected future sales revenue. The change in backlog at July 28, 2007, when compared to July 29, 2006, was in part due to the Company’s customers changing methods of issuing purchase orders to accommodate just-in-time inventory strategies. Order backlog consists of purchase orders received for products expected to be shipped approximately within the next twelve months, although shipment dates are subject to change due to design modifications, customer forecast changes, or other customer requirements.

Foreign Markets

Information concerning net sales and long-lived assets (property, plant, and equipment) by geographic areas is set forth in footnote 9 of the consolidated financial statements of this Annual Report on Form 10-K, under the caption “Enterprise-Wide Disclosures”, and that information is incorporated herein by reference.

There are risks and uncertainties that could affect the Company’s business. These risks and uncertainties include but are not limited to, the risk factors described below, in Item 7A: “Quantitative and Qualitative Disclosures about Market Risk” and elsewhere in this Form 10-K.

RISKS AND UNCERTAINTIES THAT COULD AFFECT FUTURE RESULTS

The following risks and uncertainties could affect the Company’s actual results and could cause results to differ materially from past results or those contemplated by the Company’s forward-looking statements. When used herein, the words “expects”, “believes”, “anticipates” and similar expressions are intended to identify forward-looking statements.

Potential Fluctuations in Quarterly Results The Company’s quarterly operating results have varied in the past and may vary in the future due to a variety of factors, including changes in overall demand for customers’ products, success of customers’ programs, timing of new programs, new product introductions or technological advances by the Company, its customers and its competitors and changes in pricing policies by the Company, its customers, its suppliers and its competitors. For example, the Company relies on customers’ forecasts to plan its business. If those forecasts are overly optimistic, the Company’s revenues and profits may fall short of expectations. Conversely, if those forecasts are too conservative, the Company could have an unexpected increase in revenues and profits. The products which the Company manufactures for its customers have relatively short product lifecycles, therefore the Company’s business, operating results and financial condition are dependent in significant part on the Company’s ability to obtain orders from new customers and new product programs from existing customers.

Competition The EMS industry is intensely competitive. Competitors may offer customers lower prices on certain high volume programs. This could result in price reductions, reduced margins and loss of market share, all of which would materially and adversely affect the Company’s business, operating results and financial condition. If the Company were unable to provide comparable or better manufacturing services at a lower cost than its competitors, it could cause sales to decline. In addition, competitors can copy the Company’s non-proprietary designs after the Company has invested in development of products for customers, thereby enabling such competitors to offer lower prices on such products due to savings in development costs.

Concentration of Major Customers At present, the Company’s customer base is highly concentrated and could become more or less concentrated. The Company’s largest EMS customer accounted for 22% of net sales in fiscal year 2007. This same customer accounted for 20% of sales in 2006 and 19% in 2005. For the fiscal years ended 2007, 2006, and 2005, the five largest customers

5

Table of Contents

accounted for 73%, 71% and 68% of total sales, respectively. There can be no assurance that the Company’s principal customers will continue to purchase products from the Company at current levels. Moreover, the Company typically does not enter into long-term volume purchase contracts with its customers, and the Company’s customers have certain rights to extend or delay the shipment of their orders. The Company, however, requires that its customers contractually agree to buy back inventory purchased within specified lead times to build their products if not used. The loss of one or more of the Company’s major customers, or the reduction, delay or cancellation of orders from such customers, could materially and adversely affect the Company’s business, operating results and financial condition.

Dependence on Suppliers The Company is dependent on many suppliers, including sole source suppliers, to provide key components and raw materials used in manufacturing customers’ products. Delays in deliveries from suppliers or the inability to obtain sufficient quantities of components and raw materials could cause delays or reductions in shipment of products to the Company’s customers which could adversely affect the Company’s operating results and damage customer relationships.

Dependence on Key Personnel The Company’s future success depends in large part on the continued service of its key technical, marketing and management personnel and on its ability to continue to attract and retain qualified employees. The competition for such personnel is intense and there can be no assurance that the Company will be successful in attracting and retaining such personnel. The loss of key employees could have a material adverse effect on the Company’s business, operating results and financial condition.

Foreign Manufacturing Operations Most of the products manufactured by the Company are produced at the Company’s facilities located in Mexico and China. Accordingly, the Company’s operations are subject to a variety of risks unique to international operations including import and export duties and value added taxes, import and export regulation changes, the burden and cost of compliance with foreign laws and foreign economic and political risk.

Technological Change and New Product Risk The markets for the Company’s customers’ products is characterized by rapidly changing technology, evolving industry standards, frequent new product introductions and relatively short product life cycles. The introduction of products embodying new technologies or the emergence of new industry standards can render existing products obsolete or unmarketable. The Company’s success will depend upon its customers’ ability to enhance existing products and to develop and introduce, on a timely and cost-effective basis, new products that keep pace with technological developments and emerging industry standards and address evolving and increasingly sophisticated customer requirements. Failure of the Company’s customers to do so could substantially harm the Company’s customers’ competitive positions. There can be no assurance that the Company’s customers will be successful in identifying, developing and marketing products that respond to technological change, emerging industry standards or evolving customer requirements.

Compliance with Current and Future Environmental Regulation The Company is subject to a variety of domestic and foreign environmental regulations relating to the use, storage, and disposal of materials used in our manufacturing processes. If we fail to comply with any present or future regulations, we could be subject to future liabilities or the suspension of current manufactured products. In addition, such regulations could restrict our ability to expand our operations or could require us to acquire costly equipment, substitute materials, or incur other significant expenses to comply with government regulations.

Foreign Currency Fluctuations A significant portion of the Company’s operations and customers are in foreign locations. As a result, transactions may occur in currencies other than the U.S. dollar. Exchange rate fluctuations among other currencies used by the Company could directly or indirectly affect our financial results. Future currency fluctuations are dependent upon a number of factors and cannot be easily predicted. The Company began to use Mexican peso forward contracts in fiscal 2006 to hedge foreign currency fluctuation for a portion of weekly payroll costs. However, unexpected expenses could occur from future fluctuations in exchange rates.

Dilution and Stock Price Volatility As of June 30, 2007, there were outstanding options for the purchase of 1,650,838 shares of common stock of the Company (Common Stock), all of which were vested and exercisable. Holders of the Common Stock will suffer immediate and substantial dilution to the extent outstanding options to purchase the Common Stock are exercised. The stock price of the Company may be subject to wide fluctuations and possible rapid increases or declines over a short time period. These fluctuations may be due to factors specific to the Company such as variations in quarterly operating results or changes in analysts’ earnings estimates, or to factors relating to the EMS or to the securities markets in general, which, in recent years, have experienced significant price fluctuations. These fluctuations often have been unrelated to the operating performance of the specific companies whose stocks are traded.

6

Table of Contents

None

The Company has manufacturing and sales operations located in the United States, Mexico and China. The table below lists the locations and square footage of the Company’s operating facilities:

The geographic diversity of these locations allows the Company to offer services near its customers and its major electronics markets, while reducing labor costs. The Company considers the productive capacity of its current facilities sufficient to carry on the Company’s current business. In addition, the new facility in Juarez, Mexico purchased in fiscal 2007 includes adjacent vacant land that could be developed into additional manufacturing and warehouse space.

7

Table of Contents

On October 24, 2002, the Company reached a settlement in the matter of F&G Scrolling Mouse, LLC, Fernando Falcon and Frederico Gilligan v Key Tronic Corporation (“F&G”). On September 1, 2005, the Company made its final settlement payment installment to F&G in the amount of $812,000.

The Company may be party to certain lawsuits or claims in the ordinary course of business. We do not believe that these proceedings, individually or in the aggregate, will have a material adverse effect on our financial position, results of operations or cash flow.

None

PART II

Market Information

Key Tronic Corporation’s common stock is traded on the NASDAQ Global Market, formerly the NASDAQ National Market System under the symbol “KTCC”. Quarterly high and low closing sales prices for Key Tronic common stock for fiscal years 2007 and 2006 were as follows:

High and low stock prices are based on the daily closing price reported by the NASDAQ Stock Market. These quotations represent prices between dealers without adjustment for markups, markdowns, and commissions, and may not represent actual transactions.

Holders And Dividends

As of June 30, 2007, the Company had 909 shareholders of record. The Company’s current financing agreement contains a covenant that prohibits the declaration or payment of dividends and the purchase of Company stock (see Note 4 to Consolidated Financial Statements). The Company has not paid a cash dividend and does not anticipate payment of dividends or stock buyback in the foreseeable future.

Equity Compensation Plan Information

Information concerning securities authorized for issuance under our equity compensation plans is set forth in Part III, Item 12 of this Annual Report, under the caption “Securities Authorized for Issuance under Equity Compensation Plans”, and that information is incorporated herein by reference.

8

Table of Contents

Performance Graph

Set forth below is a line graph comparing the cumulative total shareholder return on the Company’s Common Stock with the cumulative total return of the NASDAQ Stock Market (U.S. & Foreign) Index and the NASDAQ Electronic Components Index in fiscal 2007.

9

Table of Contents

The following selected consolidated financial data of the Company should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” the consolidated financial statements and related notes, and other information included in this report.

Financial Highlights

(Dollars in thousands, except per share amounts)

Overview

Key Tronic Corporation is an independent provider of EMS for OEMs. The Company’s core strengths include innovative design and engineering expertise in SMT, electronics, mechanical engineering, precision molding, design and build of molding tools, combined with high-quality, low-cost production and assembly on a global basis. The Company’s global production capability provides customers with benefits of improved supply-chain management, reduced inventories, lower transportation costs, and reduced product fulfillment time. The Company continues to make investments in its Mexico and China facilities which give it the production capacity and logistical advantages to continue to win new business. The following information should be read in conjunction with the consolidated financial statements included herein and with Item 1A Risk Factors.

10

Table of Contents

The EMS industry has historically experienced growth as more OEMs shift to outsourced manufacturing. However, Key Tronic’s revenue, like that of other EMS providers’ sales revenue, can fluctuate significantly due to a reliance on a concentrated base of customers. The product demand from the Company’s largest existing customers caused an increase in revenues during fiscal years 2005 and 2007, but these same customers saw moderate decreases in demand during fiscal 2006.

Overall, the Company’s sales in fiscal year 2007 increased by 7.5% over fiscal 2006. The Company has recently won business with new customers that should add significant revenue in the latter part of fiscal 2008. However, sales for the first quarter of fiscal 2008 are expected to be within the range of $42 million to $45 million, as current customer demand has decreased. Actual results will depend on actual levels of customers’ orders and the timing of the start up of production of new product programs. The Company believes that it is well positioned in the EMS industry to expand its customer base and continue long-term growth.

The concentration of the Company’s largest customers increased during fiscal 2007 as the top five customers’ sales increased slightly to 73% of total sales in 2007 from 71% in 2006 and 68% in 2005. The Company’s current customer relationships involve a variety of products, including consumer electronics, electronic storage devices, plastics, household products, gaming devices, specialty printers, educational toys, medical devices, exercise equipment and computer accessories. The total number of Key Tronic EMS customers continued to increase during fiscal 2007. Some of these new customers have programs that represent small annual sales while others have multi-million-dollar potential.

Gross profit as a percent of sales was 8.8% in fiscal 2007 compared to 9.2% for the prior fiscal year. The difference in gross profit is related to certain customer price decreases which were in excess of cost savings, a write off of $404,000 in inventory and tooling related to a customer that filed bankruptcy, and additional costs incurred in connection with the installation and start up of a new SMT line in Spokane Valley, WA.

Net income for fiscal 2007 was $5.23 million or $0.51 per diluted share down from $9.8 million net income or $0.97 per diluted share for fiscal 2006. The results of both years were affected by unusual events. The Company realized a gain on the sale of real estate of $1.5 million in fiscal 2007. This gain in 2007 was offset by $460,000 in costs incurred during the year in connection with a potential acquisition that the Company chose not to pursue and the write off of $404,000 of inventory and tooling and an associated write-off of $536,000 in bad debt of a certain customer that filed bankruptcy. The Company recorded a $5.0 million non-cash tax benefit in fiscal 2006.

The Company maintains a strong balance sheet with a current ratio of 2.31 and a long-term debt to equity ratio of 0.31. Total cash used in operations was $1.9 million as the Company decreased its total current liabilities by approximately $8.1 million during the fiscal year. The Company maintains sufficient liquidity for its expected future operations and had approximately $11.1 million available from its revolving line of credit based on eligible collateral at June 30, 2007. The Company maintains a good working relationship with CIT Group/Business Credit, Inc., its asset-based lender, and the Company believes that internally generated funds and its revolving line of credit should provide adequate capital for planned growth over the long term.

The EMS industry is intensely competitive, and Key Tronic, at this time, estimates it has less than 1% of the potential market. The Company believes that it can acquire new business in the future, particularly those programs that require innovative design and engineering, short lead times, or small initial volumes. The Company’s competitiveness is enhanced by its capacity to provide SMT, plastic injection molding, and final assembly. The Company is planning for long term growth by utilizing current capacity, improving manufacturing processes, and investing in additional manufacturing equipment. Current challenges facing the Company include the following: continuing to win new programs, improving operating efficiencies, controlling costs and developing competitive price strategies.

11

Table of Contents

Results of Operations

The following table sets forth for the periods indicated certain items of the consolidated statements of income expressed as a percentage of net sales. The financial information and discussion below should be read in conjunction with the consolidated financial statements and notes contained in this Annual Report.

Net Sales

Net sales in fiscal 2007 were $201.7 million compared to $187.7 million and $202.9 million in fiscal years 2006 and 2005, respectively.

The increase in net sales during 2007 relates to a moderate increase in the demand for certain of the Company’s largest existing customers’ products and revenue from new customers’ programs. Customers’ demand will fluctuate based on changes in the sell-through of customers’ products.

The decline in net sales during 2006 relates to a moderate decrease in the demand for the Company’s largest existing customers’ products from the higher level of demand seen in fiscal 2005. The Company anticipates that several new customer programs will enter production in fiscal year 2008 and begin contributing to revenue.

Cost of Sales

Total cost of sales as a percentage of net sales was 91.2%, 90.8%, and 91.9% in fiscal years 2007, 2006, and 2005, respectively.

The difference in gross profit from fiscal 2007 and 2006 is related to certain customer price decreases in the aggregate in excess of cost savings, a write off of $404,000 in inventory and tooling related to a customer that filed for bankruptcy, and additional costs incurred in connection with the installation and start up of a new SMT line in Spokane. The decrease in cost of sales as a percentage of net sales in 2006 from 2005 was due to production efficiencies achieved on existing customer programs together with decreases in warranty accruals and reserves for obsolete keyboard inventory.

Total cost of materials as a percentage of sales was approximately 65.4%, 64.6%, and 67.0% in fiscal years 2007, 2006, and 2005, respectively. The change from year-to-year is directly related to changes in product mix. Products sold in fiscal 2007 contained higher materials costs, thereby increasing costs of materials as a percentage of sales compared to fiscal 2006.

Direct production costs (direct labor and manufacturing overhead) were 13.7% of total sales in fiscal 2007 compared to 13.2% of total sales in 2006. Direct production costs were 12.9% of total sales in 2005. Included in fiscal 2007 were start-up costs associated with the installation and start up of an SMT line at the Company’s headquarters in Spokane Valley, Washington. The SMT line in Spokane Valley was developed for complex low volume production and for new product introduction. The increase in 2006 from 2005 is related to differences in the mix of manufactured programs.

The Company provides for obsolete and non-saleable inventories based on specific identification of inventory against current demand and recent usage. The amounts charged to expense were $544,000, $361,000, and $730,000 in fiscal years 2007, 2006,

12

Table of Contents

and 2005, respectively. Approximately $240,000 of the provision in fiscal 2007 was related to a specific customer filing bankruptcy during the year. The majority of the remaining provision in each year was related to domestic computer keyboards and other computer peripherals that were deemed obsolete during the year. Approximately $350,000 of the provision in 2005 was due to the decision to cease supporting direct European sales of keyboards.

The Company provides warranties on certain products it sells and estimates warranty costs based on historical experience and anticipated product returns. The amounts charged to expense are determined based on an estimate of warranty exposure. Warranty expense (recovery) was approximately $31,000, $(10,000), and $345,000 in fiscal years 2007, 2006, and 2005, respectively. Warranty expense for fiscal 2007 is related to workmanship claims on keyboards and certain EMS products. The recovery in 2006 related to the less than expected warranty expense related to a previously identified workmanship issue with a particular EMS product and a decrease in the estimated future keyboard warranty costs. The majority of the warranty expense in fiscal 2005 related to a single warranty claim relating to workmanship of a particular EMS product.

Gross Profit

In fiscal year 2007, gross profit on sales was 8.8% of revenues compared to 9.2% in fiscal year 2006 and 8.1% in fiscal year 2005. The decrease in fiscal year 2007 relates to certain customer sales price decreases in the aggregate in excess of achieved cost savings, a write off of $404,000 in inventory and tooling related to a customer that filed for bankruptcy, and the additional costs incurred with the installation and start up of a new SMT line in Spokane Valley, WA. The increase in gross profit as a percentage of net sales in 2006 from 2005 was due to production efficiencies achieved on existing customer programs together with decreases in warranty accruals and reserves for obsolete keyboard inventory. Also affecting gross profits as a percentage of sales each year are early pay discounts by the Company’s suppliers. The Company took early pay discounts that totaled $211,000, $431,000, and $132,000 in fiscal years 2007, 2006 and 2005, respectively. Early pay discounts will fluctuate based on the Company’s liquidity and changes in the discounts offered by its suppliers.

Gross profit margins reflect the impact of a number of factors that can vary from period to period, including product mix, start-up costs and efficiencies associated with new programs, product life cycles, sales volumes, capacity utilization of the Company’s resources, management of inventories, component pricing and shortages, end market demand for customers’ products, fluctuations in and timing of customer orders, and competition within the EMS industry. These and other factors can cause variations in operating results. There can be no assurance that gross margins will not decrease in future periods.

Research, Development and Engineering

Research, development and engineering expenses (RD&E) consists principally of employee related costs, third party development costs, program materials, depreciation and allocated information technology and facilities costs. The increase in RD&E in fiscal 2007 from fiscal 2006 is directly related to the hiring of new program managers to service new customer programs. As a percentage of net sales, RD&E increased slightly in fiscal 2006 when compared to 2005. The increase as a percent of sales is due to decreasing sales with no significant decrease in costs. In each of the fiscal years presented, the Company has focused most of its RD&E efforts on current customers’ EMS programs.

Selling

Sales and marketing expenses consist principally of salaries and benefits for sales and marketing personnel, advertising and marketing programs, sales commissions, and travel expenses. Similar to RD&E expenses, selling expenses change as a percent of sales relative to the allocated fixed costs in each of the years presented. Approximately half of selling expense relates to fixed salary costs.

The Company’s total selling expenses were $1.8 million, $2.1 million, and $2.2 million in fiscal years 2007, 2006, and 2005, respectively. The decrease in selling expenses in 2007 from 2006 was due to the Company decreasing its outside marketing service expense in certain months during the year. The slight decrease in 2006 from 2005 is related to a reduction in promotional programs and commissions offset in part by additional internal sales support costs.

General and Administrative

General and administrative expenses (G&A) consist of employee related costs, travel expenses and allocated information technology and facilities costs for finance, legal, human resources and executive functions, outside legal and accounting fees, provision for doubtful accounts and business insurance costs. As a percent of sales G&A was 3.6%, 3.5%, and 3.4% in fiscal years 2007, 2006, and 2005, respectively

13

Table of Contents

Total G&A was $7.4 million, $6.6 million and $7.0 million in fiscal years 2007, 2006, and 2005, respectively. In 2007, the Company provided for approximately $555,000 in bad debt expense of which $536,000 was related to a customer filing bankruptcy during the year. The Company had a provision for bad debt of $6,000 in fiscal 2006 and $140,000 in 2005. In addition $460,000 and $120,000 of due diligence expenses, attorneys’ fees, and bank fees were expensed in fiscal 2007 and 2006, respectively, as the Company decided not to proceed with a potential acquisition.

Gain on Life Insurance Proceeds

Operating expenses in fiscal 2005 included a gain on life insurance proceeds paid on policies insuring a former executive in the amount of $1.1 million. The Company does not hold life insurance policies on any other executives or former executives and does not anticipate any gains on life insurance proceeds in the future.

Gain on Real Estate Held for Sale

During the fourth quarter of fiscal 2007, the Company sold its under-utilized Las Cruces, New Mexico facility. The total sales price for the facility and adjacent vacant land was $4.3 million. Sales proceeds were in the form of $2.7 million in cash and an additional $1.5 million note from the buyer. The cash received was for the purchase of the building and approximately 9 acres of land while the note was to pay for the adjacent 14 acres of additional land. The note is payable within 45 days of the flood plain designation being removed from the adjacent vacant land. The Company recognized a $1.5 million gain on real estate held for the sale of the building and 9 acres of land. However, due to the contingent nature of the sale of the adjacent 14 acres of land, the Company has not recognized the sale of the additional land. A potential $951,000 gain is deferred until the note is paid. However, there is no assurance that the note will be paid in the future.

Interest Expense

The Company had net interest expenses of $1.4 million, $1.1 million, and $1.2 million in fiscal years 2007, 2006, and 2005, respectively. Interest expense increased in 2007 when compared to fiscal 2006 and 2005 as the average balance of the revolving line of credit was higher. The higher balance was directly attributable to higher amounts of inventory on hand during fiscal 2007. The Company does not currently use derivatives to hedge interest rate risk. Starting in 2006, the Company began to utilize short-term fixed LIBOR rates on portions of its revolving line of credit for short-term interest savings in anticipation of rate increases. The Company successfully negotiated a variable rate decrease charged by its lender on its revolving line of credit and term debt during fiscal year 2007.

Income Tax Provision

The Company had an income tax provision of $206,000 in fiscal year 2007 compared to a benefit of $(5.0) million in fiscal year 2006 and a $(75,000) benefit in fiscal year 2005. The tax provision in fiscal 2007 is related to alternative minimum taxes (AMT) paid by the Company and income taxes paid in China. The Company paid AMT due to an increase in taxable income in 2007 related to an increase in profits and an approximate $6.0 million repatriation of income from its Mexican foreign subsidiaries.

The large income tax benefit in 2006 related to the Company releasing a portion of the valuation allowance on its net deferred tax asset in accordance with Statement of Financial Accounting Standards (SFAS) No. 109, Accounting for Income Taxes. The Company has domestic tax net operating loss carryforwards (NOLs) of approximately $47.9 million at June 30, 2007. In accordance with SFAS No. 109, management assessed the Company’s recent operating levels and the sources of future taxable income to estimate a valuation allowance. A valuation allowance against deferred tax assets is required if it is more likely than not that some of the deferred tax assets will not be realized. Management has determined that the $12.8 million valuation allowance is appropriate.

The benefit for fiscal year 2005 related to the Company’s Mexican subsidiaries revising intercompany agreements upon completion of new transfer pricing studies in the fourth quarter of fiscal 2005, applying certain Mexican tax credits for the calendar years 2005 and 2004, and a reduction of Mexican statutory rates.

International Subsidiaries

The Company offers customers a complete global manufacturing solution. The Company’s facilities provide its customers the opportunity to have their products manufactured in the facility that best serves specific cost, product manufacturing, and distribution needs. Active foreign subsidiaries are located in the following locations:

14

Table of Contents

Foreign sales (based on location of customer) from worldwide operations, including domestic exports, were $18.5 million in fiscal year 2007 compared to $13.7 million and $15.8 million in fiscal years 2006 and 2005, respectively. The increase in foreign sales is related to a specific new foreign customer that purchased the rights to market an existing Company program. Products and manufacturing services provided by the Company’s subsidiary operations are sold to customers directly by the parent company. Key Tronic Computer Peripheral Co., Ltd., the Company’s subsidiary in Shanghai, China, had only minimal sales to customers in China during the past three fiscal years.

Capital Resources and Liquidity

Cash flows used by operating activities were $(1.9) million in fiscal year 2007 compared to $(34,000) used in operating activities in fiscal year 2006 and $6.6 million provided by fiscal year 2005.

The increase in cash used by operating activities in 2007 was due to primarily to a $7.1 million decrease in accounts payable offset in part by a decrease in inventory of $3.4 million. The decrease in accounts payable at the end of fiscal 2007 was related to decreasing inventory purchases and a change in vendors’ terms. Certain new customer programs have new supply channels that require earlier payments than existing suppliers. In addition, the Company has been effectively reducing its inventory on-hand during the last half of fiscal 2007.

Even though the Company had $9.8 million in net income in fiscal 2006, $5.0 million was in the form of a non-cash deferred income tax benefit. The Company also increased inventory levels by $6.6 million in response to forecasted increases in sales during the first quarter of 2007 and in support of transitioning customers to RoHS compliant products. There was also a $4.8 million increase in accounts receivable due to the volume of shipments during the fourth quarter and payment of the final installment of a litigation settlement in the amount of $812,000 offset in part by an increase in accounts payable of $5.8 million. The Company has begun to take advantage of early pay discounts available from its vendors due to higher availability on the revolving credit facility.

Cash used in investing activities includes capital expenditures. Capital expenditures were $3.1 million, $1.6 million, and $2.9 million in fiscal years 2007, 2006, and 2005, respectively. The Company’s capital expenditures are primarily for purchases of manufacturing assets to support Company operations in Mexico and China. The increase in fiscal year 2007 and 2005 capital expenditures was for purchasing facilities in Juarez to replace leased manufacturing locations. The Company also uses a variety of operating leases to fund the purchases of manufacturing equipment. Total operating leases increased during fiscal 2007, as the Company further utilized leases to finance new equipment purchases.

The Company’s primary financing activity in fiscal years 2007, 2006, and 2005 was borrowing and repayment under the Company’s financing agreement with CIT Group/Business Credit, Inc. (CIT). The Company’s financing agreement with CIT provides a revolving credit facility of up to $25 million. The revolving loan is secured by the assets of the Company. The interest rate provisions allow for a variable rate based on either the prime rate or LIBOR rate. The agreement specifies four alternative levels of margin to be added to these base rates depending on compliance with certain financial covenants. The range of interest being paid to CIT on outstanding balances was 6.83% – 8.25% as of June 30, 2007. The financing agreement contains financial covenants that relate to total equity, earnings before interest, taxes, depreciation and amortization, and a minimum fixed charge ratio. All but one of the financial covenants, the fixed charge ratio, have been removed by subsequent amendments to the financing agreement. The revolving loan matures August 22, 2009. As of June 30, 2007, the Company was in compliance with its loan covenant. At June 30, 2007, the outstanding revolving loan balance was $13.1 million compared to $10.1 million at fiscal year end July 1, 2006. The loan balance increased as the Company increased its working capital. Based on eligible collateral, approximately $11.1 million was available for drawdown from the revolving line of credit as of June 30, 2007.

15

Table of Contents

Contractual Obligations and Commitments

In the normal course of business, the Company enters into contracts which obligate the Company to make payments in the future.

The table below sets forth the Company’s significant future obligations by fiscal year:

Payments Due by Fiscal Year (in thousands)

Under the terms of the revolving credit agreement, the Company must meet a fixed coverage ratio financial covenant. As of June 30, 2007 the Company was in compliance with its loan covenants. Breaching this covenant could have a material impact on the Company’s operations or financial condition.

In addition, the Company leases some of its administrative and manufacturing facilities. A complete discussion of properties can be found in Part 1, Item 2 at “Properties”. Leases have proven to be an acceptable method for the Company to acquire new or replacement equipment and to maintain facilities with a minimum impact on its short term cash flows for operations.

In addition to the cash requirements presented above, the Company has various other accruals which are not included. The Company owes its suppliers approximately $24.1 million for accounts payable and shipments in transit at the end of the fiscal year. The Company generally pays its suppliers in a range from 30 to 120 days depending on terms offered. Quarterly payments to suppliers normally average between $30 and $35 million. These payments are financed by operating cash flows and the Company’s revolving line of credit.

The Company believes that internally generated cash flows, leasing facilities, and funds available under the revolving credit facility will satisfy cash requirements for a period in excess of 12 months and into the foreseeable future.

Critical Accounting Policies

Revenue Recognition: The Company recognizes revenue when products are shipped. Securities and Exchange Commission (SEC) Staff Accounting Bulletin (SAB) 104, Revenue Recognition states that revenue generally is realized or realizable and earned when all of the following criteria are met:

16

Table of Contents

The Company believes that it meets the above criteria for the following reasons:

Inactive, Obsolete and Surplus Inventory Reserve: The Company reserves for inventories that it deems inactive, obsolete or surplus. This reserve is calculated based upon the demand for the products that the Company produces. Demand is determined by expected sales or customer forecasts. If expected sales do not materialize, then the Company would have inventory in excess of its reserves and would have to charge the excess against future earnings. In the case where the Company has purchased material based upon a customer’s forecast, the Company is usually covered by lead-time assurance agreements with each customer. These contracts state that the financial liability for material purchased within agreed upon lead-time and based upon the customer’s forecasts, lies with the customer. If the Company purchases material outside the lead-time assurance agreement and the customer’s forecasts do not materialize, the Company would have the financial liability and would have to charge any excess obsolete inventory against earnings.

Allowance for Doubtful Accounts: The Company values its accounts receivable net of an allowance for doubtful accounts. This allowance is based on estimates of the portion of accounts receivable that may not be collected in the future, and the amount of this allowance is disclosed in the Company’s consolidated balance sheets. The estimates used are based primarily on specific identification of potentially uncollectible accounts. Such accounts are identified using publicly available information in conjunction with evaluations of current payment activity. However, if any of the Company’s customers were to develop unexpected and immediate financial problems that would prevent payment of open invoices, the Company could incur additional and possibly material expenses that would negatively impact earnings.

Accrued Warranty: An accrual is made for expected warranty costs, with the related expense recognized in cost of goods sold. Management reviews the adequacy of this accrual quarterly based on historical analysis and anticipated product returns and rework costs. As the Company has made the transition from manufacturing primarily keyboards to primarily EMS products, its exposure to warranty claims has declined significantly. The Company’s warranty period for keyboards is generally longer than that for EMS products. Also the Company does not warrant design defects for EMS customers.

Income Taxes

The Company has domestic tax loss carryforwards of approximately $47.9 million at June 30, 2007. In accordance with SFAS No. 109, Accounting for Income Taxes, management assesses the sources of future taxable income, which may be available to recognize the deductible differences that comprise deferred tax assets. A valuation allowance against deferred tax assets is required if it is more likely than not that some or all of the deferred tax assets will not be realized. Management has determined that a valuation allowance of $12.8 million on the total deferred tax asset is appropriate at this time.

Goodwill

In accordance with SFAS No. 142, Goodwill and Other Intangibles, the Company records intangible assets that are acquired individually or with a group of other assets in the financial statements at acquisition. Goodwill is tested for impairment annually. The Company adopted SFAS No. 142 on June 30, 2002, and completed its impairment test during the second quarters of each of the subsequent fiscal years. The tests did not indicate an impairment of the Company’s stated goodwill of $765,000.

Derivatives

The Company has adopted SFAS No. 133, Accounting for Derivative Instruments and Certain Hedging Activities, as amended by SFAS No. 138, Accounting for Certain Derivative Instruments and Certain Hedging Activity, an Amendment of SFAS 133, and SFAS No. 149 Amendment on Statement 133 on Derivative Instruments and Hedging Activities. In accordance with these standards all derivative instruments are recorded on the balance sheet at their respective fair values. Generally, if a derivative instrument is specifically designated as a cash flow hedge, the change in the fair value of the derivative is recorded in other comprehensive income to the extent the derivative is effective, and recognized in the statement of operations when the hedged item affects earnings. If a derivative instrument is designated as a fair value hedge, the change in fair value of the derivative and of the hedged item attributable to the hedged risk are recognized in earnings in the current period. Subsequent to year end June 30, 2007,

17

Table of Contents

the Company entered into forward contracts to hedge transactional exposure associated with commitments arising from future cash commitments in a currency other than the functional U.S. dollar.

New Accounting Pronouncements

In May 2005, the Financial Accounting Standards Board (FASB) issued SFAS No. 154, Accounting Changes and Error Corrections. SFAS No. 154 provides guidance on the accounting for and reporting of accounting changes and error corrections. It establishes retrospective application, or the latest practicable date, as the required method for reporting a change in accounting principle and the reporting of a correction of an error. SFAS No. 154 was adopted by the Company in the first quarter of fiscal 2007 and did not have a material effect on the consolidated financial statements.

In June 2006, FASB Interpretation No. (FIN) 48, Accounting for Uncertainty in Income Taxes, was issued which clarifies the accounting for uncertainty in income taxes recognized in an enterprise’s financial statements in accordance with SFAS No. 109, Accounting for Income Taxes. This Interpretation prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. This Interpretation also provides guidance on de-recognition, classification, interest and penalties, accounting in interim periods, disclosure, and transition. This Interpretation is effective for fiscal years beginning after December 15, 2006. The Company does not anticipate that the provisions of FIN 48 will have a material effect on the consolidated financial statements.

In September 2006, the FASB issued SFAS No. 157, Fair Value Measurements, which defines fair value, establishes a framework for measuring fair value under generally accepted accounting principles, and expands the requisite disclosure for fair value measurements. SFAS No. 157 is effective in fiscal years beginning after November 15, 2007 and is required to be adopted by the Company in the first quarter of fiscal year 2009. The Company does not anticipate a material effect of adopting SFAS No. 157 on its consolidated financial statements.

In September 2006, the SEC released SAB No. 108, Considering the Effects of Prior Year Misstatements when Quantifying Misstatements in Current Year Financial Statements, which provides interpretive guidance on how the effects of the carryover or reversal of prior year misstatements should be considered in quantifying a current year misstatement. Pursuant to SAB No. 108, registrants are required to quantify errors using both a balance sheet and an income statement approach and evaluate whether either approach results in quantifying a misstatement that, when all relevant quantitative and qualitative factors are considered, is material. SAB No. 108 was effective for fiscal years ending after November 15, 2006 and was applied by the Company in the current fiscal year. The application of SAB No. 108 did not have a material impact on the Company’s consolidated results of operations and financial condition as of June 30, 2007.

In February 2007, the FASB issued SFAS No. 159, Fair Value Option for Financial Assets and Financial Liabilities, including an amendment of SFAS No. 115. SFAS 159 permits entities to choose to measure certain financial instruments and certain other items at fair value at specified election dates. The fair value option may be applied instrument by instrument with certain exceptions and is applied generally on an irrevocable basis to the entire instrument. SFAS 159 is effective in fiscal years beginning after November 15, 2007 and is required to be adopted by the Company in the first quarter of fiscal year 2009. Early adoption is permitted under certain circumstances. The Company does not anticipate a material effect of adopting SFAS No. 159 on its consolidated financial statements.

The Company is subject to the risk of fluctuating interest rates in the normal course of business. The Company’s major market risk relates to its secured debt. The Company’s debt is secured by substantially all of the Company’s assets. The interest rates applicable to the Company’s revolving loan fluctuate with the JP Morgan Chase Bank prime rate and LIBOR rates. The Company does not currently enter into derivative transactions or leveraged swap agreements.

Although the Company has international operations, the functional currency for all subsidiaries is the U.S. dollar. The Company imports raw materials that are used in its manufacturing operations. The majority of the Company’s purchases is denominated in U.S. dollars and is paid under normal trade terms. In July 2006, the Company began to hedge its foreign currency exposure in Mexico by utilizing weekly forward contracts to cover local payroll costs paid in Mexican pesos. There were no hedges outstanding as of June 30, 2007.

18

Table of Contents

The table below presents principal (or notional) amounts of debt outstanding at June 30, 2007 and related weighted average variable rates by fiscal year of maturity. The weighted average variable interest rates for fiscal years 2007 through 2012 are estimated based on current rates as of June 30, 2007. These forward rates have been increased by current levels of margins based on the financing agreement with CIT. The Company’s long term debt could increase or decrease depending upon cash needs over the period of time that the financing agreement remains in place with CIT. The JP Morgan Chase Bank prime rate and LIBOR will fluctuate with the market and could go up or down depending on market conditions.

19

Table of Contents

Report of Independent Registered Public Accounting Firm

The Board of Directors and Shareholders

Key Tronic Corporation

Spokane Valley, Washington

We have audited the accompanying consolidated balance sheets of Key Tronic Corporation and subsidiaries (the Company) as of June 30, 2007 and July 1, 2006, and the related consolidated statements of earnings, shareholders’ equity and cash flows for each of the three years in the period ended June 30, 2007. We have also audited the schedule listed in the accompanying index. These financial statements and schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements and schedule are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements and schedule, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements and schedule. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Key Tronic Corporation and subsidiaries at June 30, 2007 and July 1, 2006, and the results of its operations and its cash flows for each of the three years in the period ended June 30, 2007 in conformity with accounting principles generally accepted in the United States of America.

Also, in our opinion, the schedule presents fairly, in all material respects, the information set forth therein.

20

Table of Contents

KEY TRONIC CORPORATION

CONSOLIDATED BALANCE SHEETS

See accompanying notes to consolidated financial statements.

21

Table of Contents

KEY TRONIC CORPORATION

CONSOLIDATED STATEMENTS OF EARNINGS

See accompanying notes to consolidated financial statements.

22

Table of Contents

KEY TRONIC CORPORATION

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

See accompanying notes to consolidated financial statements.

23

Table of Contents

KEY TRONIC CORPORATION

CONSOLIDATED STATEMENTS OF CASH FLOWS

See accompanying notes to consolidated financial statements.

24

Table of Contents

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

1. SIGNIFICANT ACCOUNTING POLICIES

Business

Key Tronic Corporation and subsidiaries (the Company) is engaged in electronic manufacturing services (EMS) for original equipment manufacturers (OEMs), and also manufactures keyboards and other input devices.

Principles of Consolidation

The consolidated financial statements include the Company and its wholly owned subsidiaries in Ireland, Mexico, and China. Intercompany balances and transactions have been eliminated in consolidation.

Use of Estimates

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, disclosure of contingent assets and liabilities at the date of the financial statements, and the reported amounts of revenues and expenses during the reporting period. Significant estimates include the allowance for doubtful receivables, the provision for obsolete and non-saleable inventories, the valuation allowances on deferred tax assets, valuation of goodwill, medical self insurance liability, long-term incentive compensation accrual and the provision for warranty costs. Actual results could differ from those estimates.

Cash Equivalents

The Company considers investments with an original maturity of three months or less to be cash equivalents. Cash equivalents are carried at cost, which approximates fair value. The Company has restricted cash amounts in the Company’s bank account that cannot be used for any other purpose than to pay down the Company’s long term revolving line of credit.

Allowance for Doubtful Accounts

The Company evaluates the collectibility of accounts receivable and records an allowance for doubtful accounts, which reduces the receivables to an amount that management reasonably estimates will be collected. A specific allowance is recorded against receivables that are considered to be impaired based on the Company’s knowledge of the financial condition of the customer. In determining the amount of the allowance, the Company considers several factors including the aging of the receivables, the current business environment, and historical experience. After all attempts to collect a receivable have failed, the receivable is written off against the allowance.

Inventories

Inventories are stated at the lower of cost or market. Cost is determined principally using the first-in, first-out (FIFO) method. The Company provides for obsolete and non-saleable inventories based on specific identification of inventory against current demand forecasts and recent usage.

Property, Plant and Equipment

Property, plant and equipment are carried at cost and depreciated using straight-line methods over the expected useful lives of the assets. Internally constructed molds and dies are depreciated over the expected useful lives of one to two years. Repairs and maintenance costs are expensed as incurred.

Impairment of Long-lived Assets

The Company, using its best estimates based on reasonable and supportable assumptions and projections, reviews assets for impairment whenever events or changes in circumstances have indicated that the carrying amount of its assets might not be recoverable. Impaired assets are reported at the lower of cost or fair value.

25

Table of Contents

Deferred Loan Fees

Deferred loan fees included in other assets are amortized over the term of the related loan agreement.

Accrued Warranty

An accrual is made for expected warranty costs, with the related expense recognized in cost of goods sold. Management reviews the adequacy of this accrual quarterly based on historical analyses and anticipated product returns.

Self-funded Insurance

The Company began to self-fund its domestic employee health plan on June 30, 2004. The Company contracted with a separate administrative service company to supervise and administer the program and act as its representative. The Company also insures for claims exceeding $65,000 and if the aggregate annual claims amount to more than 125% of expected claims for the plan year. The Company estimates its exposure for claims incurred but not paid at the end of each reporting period and use historical information supplied by the Company’s insurance carrier and broker to estimate its liability for these claims. This liability is subject to a total limitation that varies based on employee enrollment and factors that are established at each annual contract renewal. Actual claims experience may differ from the Company’s estimates.

Revenue Recognition

Sales revenue from manufacturing is recognized upon shipment of the manufactured product under contractual terms, which are generally FOB shipping point. Upon shipment, title transfers and the customer assumes risks and rewards of ownership of the product. Generally, there are no formal customer acceptance requirements or further obligations related to the manufacturing services; if any such requirements exist, then sales revenue is recognized at the time when such requirements are completed and such obligations are fulfilled. Revenue is recorded net of estimated returns of manufactured product based on management’s analysis of historical returns.

Revenues and associated costs from engineering design and development services, which are generally performed under contract of short term durations, are recognized only after the completed performance of the service. Revenue from engineering design and development services is approximately two percent of total revenue in fiscal years 2007 and 2006.

Shipping and Handling Fees

The Company classifies costs associated with shipping and handling fees as a component of cost of goods sold. Customer billings related to shipping and handling fees are reported in net sales.

Research, Development and Engineering

Research, development and engineering expenses include unreimbursed EMS costs as well as design and engineering costs associated with the production of EMS programs. Such costs are charged to expense as incurred.

Income Taxes

The Company accounts for income taxes in accordance with provisions of Statement of Financial Accounting Standards (SFAS) No. 109, Accounting for Income Taxes. Under the asset and liability method prescribed by SFAS No. 109, deferred income taxes are provided for temporary differences between the financial reporting and tax bases of assets and liabilities. Deferred taxes are measured using provisions of currently enacted tax laws. Tax credits are accounted for as a reduction of income taxes in the year the credit originates. Valuation allowances are established when necessary to reduce deferred tax assets to the amount that will likely be realized. The effect of changes in tax rates is recognized in the period in which the rate change occurs. Management has no future intent to repatriate remaining undistributed earnings of its foreign subsidiaries. Therefore, the determination of the unrecognized deferred tax liability on foreign subsidiary undistributed earnings is not practicable.

Earnings Per Share

Basic earnings per share is computed by dividing net income by the weighted average number of common shares outstanding during the period. Diluted earnings per share is computed by dividing net income by the weighted average number of common and

26

Table of Contents

common equivalent shares outstanding during the period using the treasury stock method. The computation assumes the proceeds from the exercise of stock options were used to repurchase common shares at the average market price during the period. The computation of diluted earnings per share does not assume conversion, exercise, or contingent issuance of common stock equivalent shares that would have an antidilutive effect on earnings per share.

Foreign Currency Transactions

The functional currency of the Company’s subsidiaries in Mexico, China and its former operating subsidiary in Ireland is the U.S. dollar. Realized foreign currency transaction gains and losses are included in general and administrative expenses.

Fair Value of Financial Instruments

The carrying values of financial instruments reflected on the balance sheets at June 30, 2007 and July 1, 2006, reasonably approximate their fair value. Based on the borrowing rates currently available to the Company for loans with similar terms and average maturities, the fair value of long-term debt is estimated to be $13.6 million and $11.1 million, respectively, as of June 30, 2007 and July 1, 2006, which approximates the carrying values.

Stock-based Compensation

Effective July 3, 2005, the Company adopted the provisions of SFAS No. 123R, Share-Based Payment, for its share-based compensation plans. The Company previously accounted for these plans under the recognition and measurement principles of Accounting Principles Board (APB) Opinion No. 25, Accounting for Stock Issued to Employees, and related interpretations and disclosure requirements established by SFAS No. 123, Accounting for Stock-Based Compensation, as amended by SFAS No. 148, Accounting for Stock-Based Compensation – Transition and Disclosure.

Under APB 25, prior to 2005 no compensation expense was recorded in earnings for the Company’s stock options. The pro forma effects on net income and earnings per share for stock options were instead disclosed in a footnote to the financial statements. Under SFAS No. 123R, all share-based compensation cost is measured at the grant date, based on the fair value of the award, and is recognized as an expense in earnings over the requisite service period. Because the Company did not have a significant number of non-vested options outstanding, the adoption of SFAS No. 123R did not have a material impact on operating results.

The Company adopted SFAS No. 123R using the modified prospective method. Under this transition method, compensation cost recognized in fiscal year 2006 of $40,000 includes the cost for all share-based awards granted prior to, but not yet vested as of July 2, 2006. This cost was based on the grant-date fair value estimated in accordance with the original provisions of SFAS No. 123. Results for prior periods have not been restated. The Company did not grant any stock options in fiscal 2006 and 2007. As of June 30, 2007, there were no unrecognized compensation costs related to remaining unvested stock options.

Reclassifications

Certain prior year amounts have been reclassified to conform with current year financial statement presentation. Such reclassifications had no impact on previously reported net income or shareholders’ equity.

Goodwill

The Company records intangible assets that are acquired individually or with a group of other assets in the financial statements at acquisition. Goodwill is tested for impairment annually. These tests have not indicated an impairment of the Company’s stated goodwill of $765,000.

New Accounting Pronouncements

In May 2005, the Financial Accounting Standards Board (FASB) issued SFAS No. 154, Accounting Changes and Error Corrections. SFAS No. 154 provides guidance on the accounting for and reporting of accounting changes and error corrections. It establishes retrospective application, or the latest practicable date, as the required method for reporting a change in accounting principle and the reporting of a correction of an error. SFAS No. 154 was adopted by the Company in the first quarter of fiscal 2007 and did not have a material effect on the consolidated financial statements.

27

Table of Contents

In June 2006, FASB Interpretation No. (FIN) 48, Accounting for Uncertainty in Income Taxes, was issued which clarifies the accounting for uncertainty in income taxes recognized in an enterprise’s financial statements in accordance with SFAS No. 109, Accounting for Income Taxes. This Interpretation prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. This Interpretation also provides guidance on de-recognition, classification, interest and penalties, accounting in interim periods, disclosure, and transition. This Interpretation is effective for fiscal years beginning after December 15, 2006. The Company does not anticipate that the provisions of FIN 48 will have a material effect on the consolidated financial statements.

In September 2006, the FASB issued SFAS No. 157, Fair Value Measurements, which defines fair value, establishes a framework for measuring fair value under generally accepted accounting principles, and expands the requisite disclosure for fair value measurements. SFAS No. 157 is effective in fiscal years beginning after November 15, 2007 and is required to be adopted by the Company in the first quarter of fiscal year 2009. The Company does not anticipate a material effect of adopting SFAS No. 157 on its consolidated financial statements.

In September 2006, the Securities and Exchange Commission (SEC) released Staff Accounting Bulletin (SAB) No. 108, Considering the Effects of Prior Year Misstatements when Quantifying Misstatements in Current Year Financial Statements, which provides interpretive guidance on how the effects of the carryover or reversal of prior year misstatements should be considered in quantifying a current year misstatement. Pursuant to SAB No. 108, registrants are required to quantify errors using both a balance sheet and an income statement approach and evaluate whether either approach results in quantifying a misstatement that, when all relevant quantitative and qualitative factors are considered, is material. SAB No. 108 was effective for fiscal years ending after November 15, 2006 and was applied by the Company in the current fiscal year. The application of SAB No. 108 did not have a material impact on the Company’s consolidated results of operations and financial condition as of June 30, 2007.

In February 2007, the FASB issued SFAS No. 159, Fair Value Option for Financial Assets and Financial Liabilities, including an amendment of SFAS No. 115. SFAS 159 permits entities to choose to measure certain financial instruments and certain other items at fair value at specified election dates. The fair value option may be applied instrument by instrument with certain exceptions and is applied generally on an irrevocable basis to the entire instrument. SFAS 159 is effective in fiscal years beginning after November 15, 2007 and is required to be adopted by the Company in the first quarter of fiscal year 2009. Early adoption is permitted under certain circumstances. The Company does not anticipate a material effect of adopting SFAS No. 159 on its consolidated financial statements.

Fiscal Year

The Company operates on a 52/53 week fiscal year. Fiscal years end on the Saturday nearest June 30. As such, fiscal years 2007, 2006, and 2005 ended on June 30, 2007, July 1, 2006, and July 2, 2005, respectively. Fiscal year 2008 will end on June 28, 2008. Fiscal 2007, 2006 and 2005 were 52 week years.

2. INVENTORIES

Components of inventories were as follows:

3. PROPERTY, PLANT AND EQUIPMENT

28

Table of Contents

During the fourth quarter of fiscal 2007, the Company sold its under-utilized Las Cruces, New Mexico facility. The total sales price for the facility and adjacent vacant land was $4.3 million. Sales proceeds were in the form of $2.7 million in cash and an additional $1.5 million note from the buyer. The cash received was for the purchase of the building and approximately 9 acres of land while the note was to pay for the adjacent 14 acres of additional land. The note is payable within 45 days of the flood plain designation being removed from the adjacent vacant land. The Company recognized a $1.5 million gain on real estate held for sale of the building and 9 acres of land. However, due to the contingent nature of the sale of the adjacent 14 acres of land, the Company has not recognized the sale of the additional land. A potential $951,000 gain is deferred until the note is paid. However, there is no assurance that the note will be paid in the future.

In December 2000, the Company sold its headquarters building, located in Spokane, Washington. In conjunction with the sale, the Company entered into a ten year lease back agreement for a portion of the building. The gain on the sale of the building was deferred under other long-term obligations and is amortized to offset lease expenses over the remaining lease term.

4. LONG-TERM DEBT

The Company has entered into a financing agreement with CIT Group/Business Credit, Inc. (CIT) which provides a revolving credit facility up to $25 million secured by the assets of the Company. The interest rate provisions allow for a variable rate based on either the prime rate or a set LIBOR rate on specific short term traunches. The agreement specifies four alternative levels of margin to be added to these base rates depending on compliance with certain financial covenants. The range of interest being paid to CIT on outstanding balances was 6.83%—8.25% as of June 30, 2007 and 7.46%—8.25% as of July 1, 2006. The Company successfully negotiated a decrease in the level of margin added in a loan agreement amendment signed in August 2006. The agreement contains financial covenants that relate to total equity, earnings before interest, taxes, depreciation and amortization, and a minimum fixed charge ratio. All but one of the financial covenants, the minimum fixed charge ratio, have been removed by subsequent amendments to the financing agreement as of August 2006. The revolving loan matures August 22, 2009. As of June 30, 2007, the Company was in compliance with the remaining financial covenant. At June 30, 2007, the outstanding revolving loan balance was $13.1 million compared to $10.1 million at fiscal year end July 1, 2006. Based on eligible collateral, approximately $11.1 million was available to draw from the revolving line of credit as of June 30, 2007.

In addition to the Company’s revolving credit facility payment obligations, the Company had outstanding a $1.0 million term loan from CIT which was included in other long term liabilities as of July 1, 2006. This credit facility was paid in full upon the sale of the Las Cruces facility in May 2007.

5. INCOME TAXES

Income tax expense (benefit) consists of the following: