LENNOX INTERNATIONAL INC - Annual Report: 2022 (Form 10-K)

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K


☒			ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2022


☐			TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from _____to ______

Commission File Number 001-15149

LENNOX INTERNATIONAL INC.

(Exact name of Registrant as specified in its charter)


Delaware			42-0991521
(State or other jurisdiction of incorporation or organization)			(I.R.S. Employer Identification Number)

2140 Lake Park Blvd. Richardson, Texas 75080

(Address of principal executive offices, including zip code)

(Registrant’s telephone number, including area code): (972) 497-5000

Securities Registered Pursuant to Section 12(b) of the Act:


Title of each class	Trading Symbol(s)	Name of each exchange on which registered
Common stock, $0.01 par value per share	LII	New York Stock Exchange

Securities Registered Pursuant to Section 12(g) of the Act: None

Indicate by checkmark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes [X] No [ ]

Indicate by checkmark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act. Yes [ ] No [X]

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the last 90 days. Yes [X] No [ ]

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes [X] No [ ]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large Accelerated Filer

[X]

Accelerated Filer

[ ]

Non-Accelerated Filer

[ ]

Smaller Reporting Company

☐

Emerging Growth Company

☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. [ ]

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report Yes ☒ No ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).Yes ☐ No x

As of June 30, 2022, the aggregate market value of the common stock held by non-affiliates of the registrant was approximately $7 billion

based on the closing price of the registrant’s common stock on the New York Stock Exchange. As of February 3, 2023, there were 35,474,054 shares of the registrant’s common stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s 2022 Definitive Proxy Statement to be filed with the Securities and Exchange Commission in connection with the registrant’s 2022 Annual Meeting of Stockholders to be held on May 18, 2023 are incorporated by reference into Part III of this report.

Auditor Name: KPMG LLP Auditor Location: Dallas, Texas Auditor Firm ID: 185

LENNOX INTERNATIONAL INC.

FORM 10-K

For the Fiscal Year Ended December 31, 2022


		Page

PART I
ITEM 1.	Business	1
ITEM 1A.	Risk Factors	8
ITEM 1B.	Unresolved Staff Comments	14
ITEM 2.	Properties	15
ITEM 3.	Legal Proceedings	16
ITEM 4.	Mine Safety Disclosures	16

PART II
ITEM 5.	Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities	16
ITEM 6.	Selected Financial Data	17
ITEM 7.	Management's Discussion and Analysis of Financial Condition and Results of Operations	17
ITEM 7A.	Quantitative and Qualitative Disclosures about Market Risk	30
ITEM 8.	Financial Statements and Supplementary Data	31
ITEM 9.	Changes in and Disagreements With Accountants on Accounting and Financial Disclosure	73
ITEM 9A.	Controls and Procedures	73
ITEM 9B.	Other Information	73

PART III
ITEM 10.	Directors, Executive Officers and Corporate Governance	73
ITEM 11.	Executive Compensation	73
ITEM 12.	Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters	73
ITEM 13.	Certain Relationships and Related Transactions, and Director Independence	74
ITEM 14.	Principal Accounting Fees and Services	74

PART IV
ITEM 15.	Exhibits and Financial Statement Schedules	74
ITEM 16.	Form 10-K Summary	77

	SIGNATURES	78
	SCHEDULE II - VALUATION AND QUALIFYING ACCOUNTS AND RESERVES	79

PART I

Item 1. Business

References in this Annual Report on Form 10-K to “we,” “our,” “us,” “LII” or the “Company” refer to Lennox International Inc. and its subsidiaries, unless the context requires otherwise.

The Company

We are a global leader in energy-efficient climate-control solutions. We design, manufacture and market a broad range of products for the heating, ventilation, air conditioning and refrigeration (“HVACR”) markets. We have leveraged our expertise to become an industry leader known for innovation, quality and reliability. Our products and services are sold through multiple distribution channels under various brand names. The Company was founded in 1895, in Marshalltown, Iowa, by Dave Lennox, the owner of a machine repair business for railroads. He designed and patented a riveted steel coal-fired furnace, which led to numerous advancements in heating, cooling and climate control solutions.

Shown in the table below are our three business segments, the key products, services and well-known product and brand names within each segment and net sales in 2022 by segment. Segment financial data for 2022, 2021 and 2020, including financial information about foreign and domestic operations, is included in Note 3 of the Notes to our Consolidated Financial Statements in “Item 8. Financial Statements and Supplementary Data” and is incorporated herein by reference.

Segment

Products & Services

Product and Brand Names

2022

Net Sales (in millions)

Residential Heating & Cooling

Furnaces, air conditioners, heat pumps, packaged heating and cooling systems, indoor air quality equipment, comfort control products, replacement parts and supplies

Lennox, Dave Lennox Signature Collection, Armstrong Air, Ducane, AirEase, Concord, MagicPak, ADP Advanced Distributor Products, Allied, Elite Series, Merit Series, Comfort Sync, Healthy Climate, Healthy Climate Solutions, iComfort ComfortSense and Lennox Stores

3,198.3

Commercial Heating & Cooling

Unitary heating and air conditioning equipment, applied systems, controls, installation and service of commercial heating and cooling equipment, variable refrigerant flow commercial products

Lennox, Model L, CORE, Energence, Prodigy, Strategos, Landmark, Raider, Lennox VRF, Lennox National Account Services, Allied Commercial, MagicPak

900.7

Refrigeration

Condensing units, unit coolers, fluid coolers, air cooled condensers, air handlers, process chillers, controls, compressorized racks.

Heatcraft Worldwide Refrigeration, Lennox (Europe HVAC), Bohn, MAGNA, Larkin, Climate Control, Chandler Refrigeration, Friga-Bohn, HK Refrigeration, Hyfra, IntelliGen and Interlink

619.4

Total

4,718.4

In November 2022, we announced the decision to explore strategic alternatives for our European commercial HVAC and refrigeration businesses, which represent approximately 5% of our annual revenues. We will continue to invest in our Heatcraft Worldwide Refrigeration business which will become part of the Commercial Heating & Cooling segment beginning in 2023 and the European portfolio will be presented with Corporate and Other beginning in 2023 until disposition. As we will manage the businesses in this manner beginning in 2023, we will present the financial results of the revised segments beginning in 2023.

Products and Services

Residential Heating & Cooling

Heating & Cooling Products. We manufacture and market a broad range of furnaces, air conditioners, heat pumps, packaged heating and cooling systems, equipment and accessories to improve indoor air quality, comfort control products, replacement parts and supplies and related products for both the residential replacement and new construction markets in North America. These products are available in a variety of designs and efficiency levels and at a range of price points, and are intended to provide a complete line of home comfort systems. We believe that by maintaining a broad product line marketed under multiple brand names, we can address different market segments and penetrate multiple distribution channels.

The “Lennox” business and brands (“Dave Lennox Signature Collection,” “Elite Series,” “Merit Series,” “iComfort,” “ComfortSense” and “Healthy Climate Solutions”) are sold directly to independent installing dealers, making us one of the largest wholesale distributors of residential heating, ventilation, and air conditioning products in North America. We continue to invest in our network of 245 Lennox Stores across the United States and Canada. These stores provide an easy access solution for contractors and independent dealers to obtain universal service and replacement parts, supplies, convenience items, tools, Lennox equipment and OEM parts.

The Allied Air Enterprise business and brands (“Armstrong Air,” “AirEase,” “Concord,” “Ducane,” “Allied,” and “MagicPak”) include a full line of heating, ventilation and air conditioning products and are sold through independent wholesale distributors in the U.S. and Canada. The Allied Air Enterprise business also sells a full line of heating, ventilation and cooling equipment through private label brands.

The Advanced Distributor Products (“ADP”) business and brand (“ADP Advanced Distributor Products”) sells evaporator coils, air handlers and unit heaters to independent HVAC wholesale distributors across the U.S. and Canada.

Commercial Heating & Cooling

North America. In North America, we manufacture and sell unitary heating and cooling equipment used in light commercial applications, such as low-rise office buildings, restaurants, retail centers, distribution, churches and schools. Our product offerings for these applications include rooftop units ranging from 2 to 50 tons of cooling capacity and split system/air handler combinations, which range from 1.5 to 20 tons of cooling capacity. These products are distributed primarily through commercial contractors and directly to national account customers. In 2021, we launched the Lennox Model L rooftop unit featuring the industry leading CORE control system and advanced variable-speed technology to maximize rebates and energy savings. In late 2022, we introduced the Enlight rooftop unit which features a high efficiency heat pump line perfectly positioned to help our customers reach their environmental and sustainability goals. We believe the success of our products is attributable to their efficiency, impact to the environment, design flexibility, total cost of ownership, ease of service, and advanced control technology.

National Account Services. National Account Service (“NAS”) provides installation, service and preventive maintenance for commercial HVAC national account customers in the United States and Canada.

Refrigeration

We manufacture and market equipment for the global commercial refrigeration markets under the Heatcraft Worldwide Refrigeration name. We sell these products to distributors, installing contractors, engineering design firms, original equipment manufacturers and end-users. Our global manufacturing, distribution, sales and marketing footprint serves customers in approximately 100 countries worldwide.

North America. Our commercial refrigeration products for the North American market include condensing units, unit coolers, fluid coolers, air-cooled condensers, air handlers and refrigeration rack systems. These products preserve food and other perishables in supermarkets, convenience stores, restaurants, warehouses and distribution centers. In addition, our products are used to cool a wide variety of industrial processes, including data centers, machine tooling, and other critical cooling applications. We routinely provide application engineering for consulting engineers, contractors, store planners, end customers and others to support the sale of commercial refrigeration products.

International. In Europe, we manufacture and sell unitary HVAC products, which range from 2 to 70 tons of cooling capacity, and applied systems with up to 200 tons of cooling capacity. Our European products consist of small package units, rooftop units, chillers, air handlers and fan coils that serve medium-rise commercial buildings, shopping malls, other retail and entertainment buildings, institutional applications and other field-engineered applications. We manufacture heating and cooling products in several locations in Europe and market these products through both direct and indirect distribution channels in Europe, the United Kingdom, Eastern Europe, Turkey, Africa, and the Middle East.

We also manufacture and market refrigeration products including condensing units, unit coolers, air-cooled condensers, fluid coolers, compressor racks and industrial process chillers. We have manufacturing locations in Germany, France and Spain. In addition, we own a 50% interest in a joint venture in Mexico that produces unit coolers, air-cooled condensers, condensing units, compressors and compressorized racks of the same design and quality as those manufactured by our U.S. business. This joint venture product line is complemented with imports from the U.S., which are sold through the joint

venture’s distribution network.

Business Strategy

Lennox offers a full spectrum of cooling, heating, indoor air quality and refrigeration products to meet the energy-efficient climate-control needs of residential and commercial customers across North America. We are focused on expanding our market position primarily through organic growth while leveraging costs to drive margin expansion and higher profit. This strategy is supported by the following four strategic priorities:

Innovative Product and System Solutions. In all of our markets, we are building on our heritage of innovation by developing residential and commercial products that give families and business owners more precise control over more aspects of their indoor environments, while significantly lowering their energy costs.

Manufacturing and Sourcing Excellence. We maintain our commitment to manufacturing and sourcing excellence by maximizing factory efficiencies and leveraging our engineering capabilities, purchasing power and sourcing initiatives to expand the use of lower-cost materials and components that meet our high-quality standards.

Distribution Excellence. By investing resources in expanding our distribution network and capabilities, we are making products available to our customers in a timely, cost-efficient manner. Additionally, we provide enhanced dealer support through the use of technology, training, advertising and merchandising.

Expense Reduction. Through our cost management initiatives, we are optimizing operating, manufacturing and administrative costs.

Marketing and Distribution

We utilize multiple channels of distribution and offer different brands at various price points in order to better penetrate the HVACR markets. Our products and services are sold through a combination of direct sales, distributors and company-owned parts and supplies stores. Dedicated sales forces and manufacturers’ representatives are deployed across our business segments and brands in a manner designed to maximize our ability to service each distribution channel. To optimize enterprise-wide effectiveness, we have active cross-functional and cross-organizational teams coordinating approaches to pricing, product design, distribution and national account customers.

The North American residential heating and cooling market provides an example of the competitive strength of our marketing and distribution strategy. We use three distinct distribution approaches in this market: the company-owned distribution system, the independent distribution system and direct sales to end-users. We distribute our “Lennox” brands in a company-owned process directly to independent dealers that install these heating and cooling products. We distribute our “Armstrong Air,” “Ducane,” “Air-Ease,” “Concord,” “MagicPak” and “ADP Advanced Distributor Products” brands through the traditional independent distribution process pursuant to which we sell our products to distributors who, in turn, sell the products to installing contractors. We also sell our products through our Lennox Stores.

Manufacturing

We operate manufacturing facilities worldwide and utilize the best available manufacturing techniques based on the needs of our businesses, including the use of lean manufacturing and principles of Six Sigma, a disciplined, data-driven approach and methodology for improving quality. We use numerous metrics to track and manage annual efficiency improvements. Some facilities are impacted by seasonal production demand, and we manufacture both heating and cooling products in those facilities to balance production and maintain a relatively stable labor force. We may also hire temporary employees to meet changes in demand.

Strategic Sourcing

We rely on various suppliers to furnish the raw materials and components used in the manufacturing of our products. To maximize our buying effectiveness in the marketplace, we have a central strategic sourcing group that consolidates purchases of certain materials, components and indirect items across business segments. The goal of the strategic sourcing group is to develop global strategies for a given component group, concentrate purchases with three to five suppliers and develop long-term relationships with these vendors. By developing these strategies and relationships, we seek to leverage our material needs to reduce costs and improve financial and operating performance. Our strategic sourcing group also works with selected suppliers to reduce costs, improve quality and delivery performance by employing lean manufacturing and Six Sigma.

Compressors, motors and controls constitute our most significant component purchases, while steel, copper and aluminum account for the bulk of our raw material purchases. We own a minority equity interest in a joint venture that manufactures compressors. This joint venture provides us with compressors for our residential and commercial heating and cooling, and refrigeration businesses.

Research and Development and Technology

Research and development is a key pillar of our growth strategy. We operate a global engineering and technology organization that focuses on new technology invention, product development, product quality improvements and process enhancements, including our development of next-generation control systems as well as heating and cooling products that include some of the most efficient products in their respective categories. We leverage intellectual property and innovative designs across our businesses. We also leverage product development cycle time improvements and product data management systems to commercialize new products to market more rapidly. We use advanced, commercially available computer-aided design, computer-aided manufacturing, computational fluid dynamics and other sophisticated design tools to streamline the design and manufacturing processes. We use complex computer simulations and analyses in the conceptual design phase before functional prototypes are created. We also operate a full line of prototype machine equipment and advanced laboratories certified by applicable industry associations.

Seasonality

Our sales and related segment profit tend to be seasonally higher in the second and third quarters of the year because summer is the peak season for sales of air conditioning equipment and services in the U.S. and Canada. For the same reason, our working capital needs are generally greater in the first and second quarters, and we generally have higher operating cash inflows in the third and fourth quarters.

HVAC markets are driven by seasonal weather patterns. HVAC products and services are sold year round, but the volume and mix of product sales and service change significantly by season. The industry generally ships roughly twice as many units during June as it does in December. Overall, cooling equipment represents a substantial portion of the annual HVAC market. Between the heating season (roughly November through February) and cooling season (roughly May through August) are periods commonly referred to as “shoulder seasons” when the distribution channel transitions its buying patterns from one season to the next. These seasonal fluctuations in mix and volume drive our sales and related segment profit, resulting in somewhat higher sales in the second and third quarters due to the higher volume in the cooling season relative to the heating season.

Patents and Trademarks

We hold numerous patents that relate to the design and use of our products. We consider these patents important, but no single patent is material to the overall conduct of our business. We proactively obtain patents to further our strategic intellectual property objectives. We own or license several trademarks and service marks we consider important in the marketing of our products and services, and we protect our marks through national registrations and common law rights.

Competition

Substantially all markets in which we participate are competitive. The most significant competitive factors we face are availability, reliability, energy efficiency, product performance, service and price, with the relative importance of these factors varying among customer applications. The following are some of the companies we view as significant competitors in each of our three business segments, with relevant brand names, when different from the company name, shown in parentheses. The marks below may be the registered or unregistered trademarks or trade names of their respective owners.

•Residential Heating & Cooling - Carrier Global Corporation (Carrier, Bryant, Payne, Tempstar, Comfortmaker, Heil, Arcoaire, KeepRite, Day & Night); Trane Technologies plc (Trane, American Standard, Ameristar, Oxbox, RunTru); Paloma Industries, Inc. (Rheem, Ruud, Weather King); Johnson Controls, Inc. (York, Luxaire, Coleman); Daikin Industries, Ltd. (Daikin, Goodman, Amana, GMC); and Melrose Industries PLC (Maytag, Westinghouse, Frigidaire, Tappan, Philco, Kelvinator, Gibson, Broan, NuTone).

•Commercial Heating & Cooling - Carrier Global Corporation (Carrier, ICP Commercial); Trane Technologies plc (Trane); Paloma Industries, Inc. (Rheem, Ruud); Johnson Controls, Inc. (York); Daikin Industries, Ltd. (Goodman, McQuay); Melrose Industries PLC (Mammoth); and AAON, Inc.

•Refrigeration - Hussmann Corporation; Paloma Industries, Inc. (Rheem Manufacturing Company (Heat Transfer Products Group)); Emerson Electric Co. (Copeland); Carrier Global Corporation (Carrier); GEA Group (Kuba, Searle, Goedhart); Alfa Laval; Guntner GmbH; Kelvion - Profroid (Carrier); Panasonic Corp. (Sanyo); Technotrans; and Deltatherm.

Human Capital Management

Our success, in large part, relies on the character of our people. That character is reflected in our core values of integrity, respect and excellence. Our continued success depends on our ability to attract, motivate, develop and retain employees who embody our core values.

Management strives to maintain the right number of employees with the necessary skills to match the expected demand for the products we manufacture and distribute. As of December 31, 2022, we employed approximately 13,200 people. Of these employees, approximately 5,100 were salaried and 8,100 were hourly. The number of hourly workers varies in order to match our labor needs during periods of fluctuating demand.

Approximately 3,000 of our employees, including international locations, are represented by unions. We believe we have good relationships with our employees and with the unions representing them. On November 1, 2021, our Marshalltown, Iowa-based union ratified a five-year labor agreement. We currently do not anticipate any material adverse consequences resulting from negotiations to renew other collective bargaining agreements.

To succeed in an ever-changing and competitive labor market, we have identified priorities we believe are critical to our success in attracting, motivating, developing, and retaining employees. These include among other things: (1) providing competitive compensation and benefit programs, (2) providing career development programs, (3) promoting health and safety, and (4) championing a diverse and inclusive work environment. Further information is available in our Environmental Social and Governance (ESG) report available on our website. The information on our website, including the ESG Report, is not a part of, or incorporated by reference into, this Annual Report on Form 10-K.

Compensation and Benefit Programs. We are committed to providing our employees with a competitive compensation package that rewards performance and achievement of desired business results. Our compensation package consists of three primary benefits: pay (base pay and incentive programs), health and welfare benefits, and retirement contributions. We analyze our compensation and benefits programs annually to ensure we remain competitive and make changes as necessary.

Career Development Programs. To help our employees succeed in their roles and grow their careers at Lennox, we provide numerous training and development programs. One example is our “Career Journey” program which provides employees with engaging tools enabling them to reflect on skills and interests, and explore a variety of potential career paths. Career Journey allows employees to have more meaningful career development conversations with their manager. In addition to training and development programs we have a robust performance review and goal setting process for all employees. We believe this helps ensure that employees meet expectations throughout the year while continuing development of their long-term careers at Lennox.

Employee Health and Safety. As part of our effort to attract and retain a competitive workforce, we are committed to ensuring that every employee returns home safe at the end of each day. Safety is our top priority and our safety programs are succeeding to reduce risks across our operations. In response to the COVID-19 pandemic, we have taken extensive actions that are aligned with the World Health Organization and Centers for Disease Control and Prevention to protect the health and safety of our workers.

Diversity and Inclusion. We are committed to a diverse workforce built on a foundation of respect and value for people of different backgrounds, experiences, and perspectives. Our commitment to diversity and inclusion enables all employees to be creative, feel challenged, and thrive, which allows us to leverage the unique strengths of our employees to deliver innovative products and solutions for our customers.

Our senior managers, together with our human resources team, are devoted to promoting the above priorities to ensure we remain an employer of choice. We regularly conduct anonymous surveys to seek feedback from our employees on a variety of subjects, including safety, communications, diversity and inclusion, management support to succeed within our company, and career growth.

Despite these efforts, we have experienced, and could continue to experience, higher employee absenteeism, particularly in manufacturing and distribution locations. These concerns have decreased the pool of available qualified talent for certain functions. As a result, we have made and continue to make strong efforts to maintain and recruit qualified talent and are committed to being competitive to retain the best talent possible.

Environmental Regulation

Our operations are subject to evolving and often increasingly stringent international, federal, state and local laws and regulations concerning the environment. Environmental laws affect or could affect our operations. We believe we are in substantial compliance with such existing environmental laws and regulations.

Energy Efficiency. The U.S. Department of Energy has numerous active energy conservation rulemakings that impact residential and commercial heating, air conditioning and refrigeration equipment. We are actively involved in U.S. Department of Energy activities related to energy efficiency. We are prepared to have compliant products in place in advance of the effective dates of all such regulations being considered by the U.S. Department of Energy.

Refrigerants. The use of hydroflurocarbons (“HFCs”) as refrigerants for air conditioning and refrigeration equipment is common practice in the HVACR industry and is regulated. We believe we have complied with applicable rules and regulations in various countries governing the use of HFCs. We are an active participant in the ongoing international and domestic dialogue on this subject and are well positioned to react in a timely manner to changes in the regulatory landscape.

Remediation Activity. In addition to affecting our ongoing operations, applicable environmental laws can impose obligations to remediate hazardous substances at our properties, at properties formerly owned or operated by us and at facilities to which we have sent or send waste for treatment or disposal. We are aware of contamination at some of our facilities; however, based on facts presently known, we do not believe that any future remediation costs at such facilities will be material to our results of operations. For more information, see Note 5 in the Notes to our Consolidated Financial Statements.

In the past, we have received notices that we are a potentially responsible party along with other potentially responsible parties in Superfund proceedings under the Comprehensive Environmental Response, Compensation and Liability Act for cleanup of hazardous substances at certain sites to which the potentially responsible parties are alleged to have sent waste. Based on the facts presently known, we do not believe environmental cleanup costs associated with any Superfund sites about which we have received notice that we are a potentially responsible party will be material to our results of operations.

E-Waste and Related Compliance. Many countries around the world as well as many states in the U.S. have enacted directives, laws, and regulations directed at preventing electrical and electronic equipment waste by encouraging reuse and recycling as well as restricting the use of hazardous products in electrical and electronic equipment. All HVACR products and certain components of such products are potentially subject to these types of requirements. We are not uniquely affected as compared to other manufacturers. We actively monitor the development and evolution of such requirements and believe we are well positioned to comply with such directives in the required time frames.

Available Information

Our web site address is www.lennoxinternational.com. We make available, free of charge through our web site, our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, including exhibits, and amendments to those reports filed or furnished pursuant to the Securities Exchange Act of 1934, as amended (the “Exchange Act”), as soon as reasonably possible after such material is electronically filed with, or furnished to, the Securities and Exchange Commission. The information on our web site is not a part of, or incorporated by reference into, this Annual Report on Form 10-K.

The Securities and Exchange Commission maintains a website at www.sec.gov that contains reports, proxy and information statements, and other information regarding issuers, including Lennox International, that file electronically with the Securities and Exchange Commission.

Information about our Executive Officers

Our executive officers, their present positions and their ages are as follows as of February 3, 2023:


Name	Age	Position
Alok Maskara	51	Chief Executive Officer
Joseph W. Reitmeier	58	Executive Vice President, Chief Financial Officer
Douglas L. Young	60	Executive Vice President
Gary S. Bedard	58	Executive Vice President & President LII Residential Heating & Cooling
Prakash Bedapudi	56	Executive Vice President, Chief Technology Officer
Daniel M. Sessa	58	Executive Vice President, Chief Human Resources Officer
John D. Torres	64	Executive Vice President, Chief Legal Officer and Secretary
Joe Nassab	55	Executive Vice President & President LII North America Commercial Heating & Cooling
Chris A. Kosel	55	Vice President, Chief Accounting Officer and Controller

Alok Maskara joined Lennox International Inc. as Chief Executive Officer on May 9, 2022. Most recently he served for five years as CEO of Luxfer Holdings PLC, an international industrial company focused on advanced materials. Mr. Maskara also served for nearly a decade as president of several global business units at Pentair PLC, a leading provider of water treatment and sustainable applications. Previously he held various leadership positions at General Electric Corporation and McKinsey & Company. Mr. Maskara also serves on the board of Franklin Electric (Nasdaq: FELE) a company focused on global water and fluid solutions. Mr. Maskara graduated with a bachelor of technology degree in chemical engineering from the Indian Institute of Technology in 1992 and a master’s degree in chemical engineering from the University of New Mexico in 1994. In 2000, he earned an MBA from the Kellogg School of Management at Northwestern University.

Joseph W. Reitmeier was appointed Executive Vice President, Chief Financial Officer in July 2012. He had served as Vice President of Finance for the LII’s Commercial Heating & Cooling segment since 2007 and as Director of Internal Audit from 2005 to 2007. Before joining the Company, he held financial leadership roles at Cummins Inc. and PolyOne Corporation. He is a director of Watts Water Technologies, Inc., a global provider of plumbing, heating and water quality solutions for residential, industrial, municipal and commercial settings. Mr. Reitmeier holds a bachelor’s degree in accounting from the University of Akron and an MBA from Case Western Reserve University. He is also a Certified Public Accountant.

Douglas L. Young has served as an Executive Vice President since January 2023. Most recently he served as Executive Vice President, President and Chief Operating Officer of LII’s Residential Heating & Cooling segment in October 2006. Mr. Young had previously served as Vice President and General Manager of North American Residential Products since 2003 and as Vice President and General Manager of Lennox North American Residential Sales, Marketing, and Distribution from 1999 to 2003. Prior to his career with LII, Mr. Young was employed in the Appliances division of GE, where he held various management positions before serving as General Manager of Marketing for GE Appliance division’s retail group from 1997 to 1999 and as General Manager of Strategic Initiatives in 1999. He holds a BSBA from Creighton University and a master’s of science in management from Purdue University. Mr. Young serves on the Board of Directors of Beacon Roofing Supply, a general building material distributor and is a past Chairman of the Board of Directors of AHRI (the Air-Conditioning, Heating, and Refrigeration Institute), the trade association for the HVACR and water heating equipment industries. In November 2022, Mr. Young advised leadership that he intended to retire effective June 30, 2023.

Gary S. Bedard was appointed Executive Vice President & President of LII’s Residential Heating & Cooling business in January 2023. Most recently, he served as Executive Vice President & President of LII's Worldwide Refrigeration business, a position he held since October 2017. Prior to that, Mr. Bedard served as Vice President and General Manager, LII Residential Heating & Cooling for 12 years. He has also held the positions of Vice President, Residential Product Management, LII Worldwide Heating and Cooling, Director of Brand and Product Management, and District Manager for Lennox Industries’ New York District. Before joining LII in 1998, Mr. Bedard spent eight years at York International in product management and sales leadership roles for commercial applied and unitary systems as well as residential systems. Mr. Bedard has a bachelor’s degree in engineering management from the United States Military Academy at West Point. Mr. Bedard serves on the Board of Directors of the AHRI, the trade association for the HVACR and water heating equipment industries.

Prakash Bedapudi was appointed Executive Vice President, Chief Technology Officer in July 2008. He had previously served as Vice President, Global Engineering and Program Management for Trane Inc. Commercial Systems from 2006 through 2008, and as Vice President, Engineering and Technology for Trane’s Residential Systems division from 2003 through 2006. Prior to his career at Trane, Mr. Bedapudi served in senior engineering leadership positions for GE Transportation Systems, a division of General Electric Company, and for Cummins Engine Company. He holds a bachelor of science in mechanical/automotive engineering from Karnataka University, India and a master’s of science in mechanical/aeronautical engineering from the University of Cincinnati.

Daniel M. Sessa was appointed Executive Vice President, Chief Human Resources Officer in June 2007. He had previously served in numerous senior human resources and legal leadership positions for United Technologies Corporation since 1996, including Vice President, Human Resources for Otis Elevator Company - Americas from 2005 to 2007, Director, Employee Benefits and Human Resources Systems for United Technologies Corporation from 2004 to 2005, and Director, Human Resources for Pratt & Whitney from 2002 to 2004. He holds a bachelor of arts in law and society from the State University of New York at Binghamton and a juris doctor from the Hofstra University School of Law.

John D. Torres was appointed Executive Vice President, Chief Legal Officer and Secretary in December 2008. He had previously served as Senior Vice President, General Counsel and Secretary for Freescale Semiconductor, a semiconductor manufacturer that was originally part of Motorola. He joined Motorola’s legal department as Senior Counsel in 1996 and was appointed Vice President, General Counsel of the company’s semiconductor business in 2001. Prior to joining Motorola, Mr. Torres served 13 years in private practice in Phoenix, specializing in commercial law. He holds a bachelor of arts from Notre Dame and a juris doctor from the University of Chicago.

Joe Nassab was appointed Executive Vice President & President of our North America Commercial Heating & Cooling business on May 4, 2022. He joined LII in 2010 as Vice President and General Manager of Allied Air. Before joining LII, Joe worked for 20 years at General Electric Company in a variety of general management, product management, and marketing leadership roles. Joe has a bachelor’s degree in finance from the University of Michigan.

Chris A. Kosel was appointed Vice President, Chief Accounting Officer and Controller in May 2017. He had previously served as Vice President, Business Analysis and Planning for the Company since 2016. He also had served as Vice President, Finance and Controller and Director of Finance for the Company’s North America Commercial Business from 2015 to 2016 and Director, Financial Planning and Analysis for the Company’s Residential Business Unit from 2014 to 2015. Prior to 2014 he had served as Director, Finance for the Company’s Lennox Stores business and Director of the Company’s Financial Shared Services function. Prior to joining Lennox, he worked for Ernst & Young. He holds a bachelor’s degree in accounting from Texas A&M University. He is also a Certified Public Accountant.

Item 1A. Risk Factors

Forward-Looking Statements

This Annual Report on Form 10-K contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Exchange Act that are based on information currently available to management as well as management’s assumptions and beliefs as of the date hereof. All statements, other than statements of historical fact, included in this Annual Report on Form 10-K constitute forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. Forward-looking statements can be identified by the words “may,” “will,” “should,” “plan,” “predict,” “anticipate,” “believe,” “intend,” “estimate” and “expect” and similar expressions. Statements that are not historical should also be considered forward-looking statements. Such statements reflect our current views with respect to future events. Readers are cautioned not to place undue reliance on these forward-looking statements. We believe these statements are based on reasonable assumptions; however, such statements are inherently subject to risks and uncertainties, including but not limited to the specific uncertainties discussed elsewhere in this Annual Report on Form 10-K and the risk factors set forth in Item 1A. Risk Factors in this Annual Report on Form 10-K. These risks and uncertainties may affect our performance and results of operations. Should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual results may differ materially from those in the forward-looking statements. We disclaim any intention or obligation to update or review any forward-looking statements or information, whether as a result of new information, future events or otherwise unless required by law.

Risk Factors

The following risk factors and other information included in this Annual Report on Form 10-K should be carefully considered. We believe these are the principal material risks currently facing our business; however, additional risks and uncertainties not presently known to us or that we presently deem less significant may also impair our business operations. If any of the following risks or those disclosed in our other SEC filings occurs, our business, financial condition or results of operations could be materially adversely affected.

Business and Operational Risks

We May Not be Able to Compete Favorably in the Competitive HVACR Business.

Substantially all of the markets in which we operate are competitive. The most significant competitive factors we face are product reliability, product performance, reputation of our company and brands, service and price and global supply chain constraints, with the relative importance of these factors varying among our product lines. Other factors that affect competition in the HVACR market include the development and application of new technologies, an increasing emphasis on the development of more efficient HVACR products and new product introductions. We may not be able to adapt to market changes as quickly or effectively as our current and future competitors. Also, the establishment of manufacturing operations in low-cost countries could provide cost advantages to existing and emerging competitors. Some of our competitors may have greater financial resources than we have, allowing them to invest in more extensive research and development and/or marketing activity and making them better able to withstand adverse HVACR market conditions. Current and future competitive pressures may cause us to reduce our prices or lose market share, or could negatively affect our cash flow, all of which could have a material adverse effect on our results of operations.

If We Cannot Successfully Execute our Business Strategy, Our Results of Operations Could be Adversely Impacted.

Our future success depends on our continued investment in research and new product development as well as our ability to commercialize new HVACR technological advances in domestic and global markets. If we are unable to continue to timely and successfully develop and market new products, achieve technological advances, or extend our business model and technological advances into international markets, our business and results of operations could be adversely impacted.

We are engaged in various manufacturing rationalization actions designed to achieve our strategic priorities of manufacturing, sourcing, and distribution excellence and of lowering our cost structure. For example, we are continuing to reorganize our North American distribution network in order to better serve our customers’ needs by deploying parts and equipment inventory closer to them and are expanding our sourcing activities outside of the U.S. In such case, our results of operations and profitability may be negatively impacted, making us less competitive and potentially causing us to lose market share.

Our Ability to Meet Customer Demand may be Limited by Our Single-Location Production Facilities, Reliance on Certain Key Suppliers and Unanticipated Significant Shifts in Customer Demand.

We manufacture many of our products at single-location production facilities. In certain instances, we heavily rely on suppliers who also may concentrate production in single locations or source unique, necessary products from only one supplier. Any significant interruptions in production at one or more of our facilities, or at a facility of one of our key suppliers, could negatively impact our ability to deliver our products to our customers, especially as we continue to experience disruptions in supply.

Further, even with all of our facilities running at full production, we could potentially be unable to fully meet demand during an unanticipated period of exceptionally high demand. Our inability to meet our customers’ demand for our products could have a material adverse effect on our business, financial condition, and results of operations.

Our Results of Operations May Suffer if We Cannot Continue to License or Enforce the Intellectual Property Rights on Which Our Businesses Depend or if Third Parties Assert That We Violate Their Intellectual Property Rights.

We rely upon patent, copyright, trademark and trade secret laws and agreements to establish and maintain intellectual property rights in the products we sell. Our intellectual property rights could be challenged, invalidated, infringed, circumvented, or be insufficient to permit us to take advantage of current market trends or to otherwise provide competitive

advantages. Further, the laws of certain countries do not protect proprietary rights to the same extent as the laws of the United States.

Third parties may also claim that we are infringing upon their intellectual property rights. If we do not license infringed intellectual property or if we are required to substitute similar technology from another source, our operations could be adversely affected. Even if we believe that intellectual property claims are without merit, they can be time consuming, require significant resources and be costly to defend. Claims of intellectual property infringement also might require us to redesign affected products, pay costly damage awards, or face injunction prohibiting us from manufacturing, importing, marketing, or selling certain of our products. Even if we have agreements to indemnify us, indemnifying parties may be unable or unwilling to do so.

Our Operations Can Be Adversely Affected By Our Ability to Attract, Motivate, Develop, and Retain Our Employees, Labor Shortages and Work Stoppages, Turnover, Labor Cost Increases and Other Labor Relations Problems.

We are committed to attracting, motivating, developing, and retaining our employees to ensure we remain an employer of choice. Despite our efforts, we have experienced, and could continue to experience, higher employee turnover and absenteeism, particularly in manufacturing and distribution locations, as a result of COVID-19 related concerns and other factors. A number of factors may adversely affect the labor force available or increase labor costs, including high employment levels, related competition, and federal unemployment subsidies, such as unemployment benefits offered in response to the COVID-19 pandemic. These concerns have decreased the pool of available qualified talent for certain functions. In addition, as of December 31, 2022, approximately 23% of our workforce, including international locations, was unionized. Our Marshalltown, Iowa-based union ratified a five-year labor agreement on November 1, 2021; however, the results of future negotiations with unions are uncertain. If we are unsuccessful in meeting these challenges, our results of operations could be materially impacted.

Volatility in Capital Markets Could Necessitate Increased Cash Contributions by Us to Our Pension Plans to Maintain Required Levels of Funding.

Volatility in the capital markets may have a significant impact on the funding status of our defined benefit pension plans. If the performance of the capital markets depresses the value of our defined benefit pension plan assets or increases the liabilities, we would be required to make additional contributions to the pension plans. The amount of contributions we may be required to make to our pension plans in the future is uncertain and could be significant, which may have a material adverse effect on our results of operations.

Industry Risks

Our Financial Performance Is Affected by the Conditions and Performance of the U.S. Construction Industry.

Our business is affected by the performance of the U.S. construction industry. Our sales in the residential and commercial new construction markets correlate to the number of new homes and buildings that are built, which in turn is influenced by cyclical factors such as interest rates, inflation, availability of financing, consumer spending habits and confidence, employment rates and other macroeconomic factors over which we have no control. Our sales may not improve, or improvement may be limited or lower than expected.

Cooler than Normal Summers and Warmer than Normal Winters May Depress Our Sales.

Demand for our products and for our services is seasonal and strongly affected by the weather. Cooler than normal summers depress our sales of replacement air conditioning and refrigeration products and services. Similarly, warmer than normal winters have the same effect on our heating products and services. The effects of climate change, such as extreme weather conditions and events and water scarcity, may exacerbate fluctuations in typical weather patterns, creating financial risks to our business.

Price Volatility for Commodities and Components We Purchase or Significant Supply Interruptions Could Have an Adverse Effect on Our Cash Flow or Results of Operations.

We depend on raw materials, such as steel, copper and aluminum, and components purchased from third parties to manufacture our products. Some of these third-party suppliers are located outside of the United States. We generally

concentrate purchases for a given raw material or component with a small number of suppliers. If a supplier is unable or unwilling to meet our supply requirements, including suffering any disruptions at its facilities or in its supply chain, we could experience supply interruptions or cost increases, either of which could have an adverse effect on our results of operations. Similarly, suppliers of components that we purchase for use in our products may be affected by rising material costs and pass these increased costs on to us. Although we regularly pre-purchase a portion of our raw materials at fixed prices each year to hedge against price increases, an increase in raw materials prices not covered by our fixed price arrangements could significantly increase our cost of goods sold and negatively impact our margins if we are unable to effectively pass such price increases on to our customers. Alternatively, if we increase our prices in response to increases in the prices or quantities of raw materials or components or if we encounter significant supply interruptions, our competitive position could be adversely affected, which may result in depressed sales and profitability.

The ongoing COVID-19 pandemic has resulted in increased global supply chain constraints and disruption to the operations of certain of our suppliers and we cannot predict the duration or severity of current supply-chain issues, including increased input material costs and component shortages, delivery disruptions and delays, and inflation. Additionally, the effects of climate change, including extreme weather events, long-term changes in temperature levels, water availability, increased cost for decarbonizing process heating, supply costs impacted by increasing energy costs, or energy costs impacted by carbon prices or offsets may exacerbate supply chain constraints and disruption. Resulting supply chain constraints have required, and may continue to require, in certain instances, alternative delivery arrangements and increased costs and could have a material adverse effect on our business and operations.

In addition, we use derivatives to hedge price risk associated with forecasted purchases of certain raw materials. Our hedged prices could result in paying higher or lower prices for commodities as compared to the market prices for those commodities when purchased.

Legal, Tax and Regulatory Risks

Changes in Environmental and Climate-Related Legislation, Government Regulations, or Policies Could Have an Adverse Effect on Our Results of Operations.

The sales, gross margins, and profitability for each of our segments could be directly impacted by changes in legislation, government regulations, or policies (collectively, “LRPs”) relating to global climate change and other environmental initiatives and concerns. These LRPs, implemented under global, national, and sub-national climate objectives or policies, can include changes in environmental and energy efficiency standards and tend to target the global warming potential of refrigerants and hydrofluorocarbons, equipment energy efficiency, and combustion of fossil fuels as a heating source. Many of our products consume energy and use refrigerants and hydroflurocarbons. LRPs that seek to reduce greenhouse gas emissions may require us to make increased capital expenditures to develop or market new products to meet new LRPs. Further, our customers and the markets we serve may impose emissions or other environmental standards through LRPs or consumer preferences that may require additional time, capital investment, or technological advancement. Our inability or delay in developing or marketing products that match customer demand while also meeting applicable LRPs may negatively impact our results.

There continues to be a lack of consistent climate legislation and regulations, which creates economic and regulatory uncertainty. Such regulatory uncertainty could adversely impact the demand for energy efficient buildings and could increase costs of compliance. Additionally, the extensive and ever-changing legislation and regulations could impose increased liability for remediation costs and civil or criminal penalties in cases of non-compliance. Because these laws are subject to frequent change, we are unable to predict the future costs resulting from environmental compliance.

Changes in U.S. Trade Policy, Including the Imposition of Tariffs and the Resulting Consequences, Could Have an Adverse Effect on Our Results of Operations.

The U.S. government has made changes in U.S. trade policy over the past several years. These changes include renegotiating and terminating certain existing bilateral or multi-lateral trade agreements, such as the U.S.-Mexico-Canada Agreement, and initiating tariffs on certain foreign goods from a variety of countries and regions, most notably China. These changes in U.S. trade policy have resulted in, and may continue to result in, one or more foreign governments adopting responsive trade policies that make it more difficult or costly for us to do business in or import our products or components from those countries. The sales, gross margins, and profitability for each of our segments could be directly impacted by changes in tariffs and trade agreements.

We cannot predict the extent to which the U.S. or other countries will impose new or additional quotas, duties, tariffs, taxes or other similar restrictions upon the import or export of our products in the future, nor can we predict future trade policy or the terms of any renegotiated trade agreements and their impact on our business. The continuing adoption or expansion of trade restrictions, the occurrence of a trade war, or other governmental action related to tariffs or trade agreements or policies has the potential to adversely impact demand for our products, our costs, our customers, our suppliers, and the U.S. economy, which in turn could have a material adverse effect on our business, operating results, and financial condition.

We May Incur Substantial Costs as a Result of Claims Which Could Have an Adverse Effect on Our Results of Operations.

The development, manufacture, sale and use of our products involve warranty, intellectual property infringement, and product liability claims, and other liabilities and risks for the installation and service of our products. Our product liability insurance policies have limits that, if exceeded, may result in substantial costs that could have an adverse effect on our results of operations. In addition, warranty claims are not covered by our product liability insurance and certain product liability claims may also not be covered by our product liability insurance.

For some of our HVACR products, we provide warranty terms ranging from one to 20 years to customers for certain components such as compressors or heat exchangers. For certain limited products, we provided lifetime warranties. Warranties of such extended lengths pose a risk to us as actual future costs may exceed our current estimates of those costs. Warranty expense is recorded on the date that revenue is recognized and requires significant assumptions about what costs will be incurred in the future. We may be required to record material adjustments to accruals and expense in the future if actual costs for these warranties are different from our assumptions.

We are Subject to Claims, Lawsuits, and Other Litigation That Could Have an Adverse Effect on Our Results of Operations.

We are involved in various claims and lawsuits incidental to our business, including those involving product liability, labor relations, alleged exposure to asbestos-containing materials and environmental matters, some of which claim significant damages. Estimates related to our claims and lawsuits, including estimates for asbestos-related claims and related insurance recoveries, involve numerous uncertainties. Given the inherent uncertainty of litigation and estimates, we cannot be certain that existing claims or litigation or any future adverse legal developments will not have a material adverse impact on our financial condition.

General Risk Factors

Global General Business, Economic and Market Conditions Could Adversely Affect Our Financial Performance and Limit Our Access to the Capital Markets.

Disruptions in U.S. or global financial and credit markets or increases in the costs of capital might have an adverse impact on our business. The tightening, unavailability or increased cost of credit adversely affects the ability of our customers to obtain financing for significant purchases and operations, resulting in a decrease in sales of our products and services and may impact the ability of our customers to make payments to us. Similarly, tightening of available credit may adversely affect our supplier base and increase the potential for one or more of our suppliers to experience financial distress or bankruptcy. Our business may also be adversely affected by future decreases in the general level of economic activity and increases in borrowing costs, which may cause our customers to cancel, decrease or delay their purchases of our products and services.

If financial markets were to deteriorate, or costs of capital were to increase significantly due to a lowering of our credit ratings, prevailing industry conditions, the volatility of the capital markets or other factors, we may be unable to obtain new financing on acceptable terms, or at all. A deterioration in our financial performance could also limit our future ability to access amounts currently available under our Credit Agreement. In addition, availability under our asset securitization agreement may be adversely impacted by credit quality and performance of our customer accounts receivable. The availability under our asset securitization agreement is based on the amount of accounts receivable that meet the eligibility criteria of the asset securitization agreement. If receivable losses increase or credit quality deteriorates, the amount of eligible receivables could decline and, in turn, lower the availability under the asset securitization.

We cannot predict the likelihood, duration, or severity of any future disruption in financial markets or any adverse economic conditions in the U.S. and other countries.

The COVID-19 Pandemic Has Disrupted Our Business Operations and Results of Operations.

Since 2020, the spread of COVID-19 and the developments surrounding the global pandemic have disrupted our business operations and affected our results of operations. In 2022, the COVID-19 pandemic continued to create supply chain disruptions and higher employee absenteeism in our factories and distribution locations. We cannot predict whether any of our manufacturing, operational, or distribution facilities will experience any future disruptions, or how long such disruptions would last.

There remains uncertainty regarding how COVID-19 will impact the economy and our results in the future. The extent to which the COVID-19 pandemic impacts us will depend on numerous evolving factors and future developments that we are not able to predict, including the duration and scope of the pandemic; governmental, business, and individuals’ actions in response to the pandemic; our ability to maintain sufficient qualified personnel due to employee illness, quarantine, willingness to return to work, vaccine and/or testing mandates, face-coverings and other safety requirements, general scarcity of employees, or travel and other restrictions; current global supply chain disruptions caused by the COVID-19 pandemic; and the impact on economic activity, including financial market instability.

Our International Operations Subject Us to Risks Including Foreign Currency Fluctuations, Regulations and Other Risks.

We earn revenue, pay expenses, own assets, and incur liabilities in countries using currencies other than the U.S. dollar including the Canadian dollar, the Mexican peso, and the Euro. Our Consolidated Financial Statements are presented in U.S. dollars and we translate revenue, income, expenses, assets, and liabilities into U.S. dollars at exchange rates in effect during or at the end of each reporting period. Therefore, increases or decreases in the value of the U.S. dollar relative to other currencies may affect our net operating revenues, operating income and the value of balance sheet items denominated in foreign currencies. Because of the geographic diversity of our operations, weaknesses in some currencies might be offset by strengths in others over time. However, we cannot assure that fluctuations in foreign currency exchange rates, particularly the strengthening of the U.S. dollar against major currencies, would not materially affect our financial results.

In addition to the currency exchange risks inherent in operating in foreign countries, our international sales, and operations, including purchases of raw materials from international suppliers, are subject to risks associated with local government laws, regulations, and policies (including those related to tariffs and trade barriers, investments, taxation, exchange controls, employment regulations and changes in laws and regulations). Our international sales and operations are also sensitive to changes in foreign national priorities, including government budgets, as well as to geopolitical and economic instability. International transactions may involve increased financial and legal risks due to differing legal systems and customs in foreign countries, as well as compliance with anti-corruption laws such as the U.S. Foreign Corrupt Practices Act and the U.K. Bribery Act. The ability to manage these risks could be difficult and may limit our operations and make the manufacture and sale of our products internationally more difficult, which could negatively affect our business and results of operations.

Conflicts, wars, natural disasters, climate change, infectious disease outbreaks or terrorist acts could also cause significant damage or disruption to our operations, employees, facilities, systems, suppliers, supply chain, distributors, resellers, or customers in the United States and internationally for extended periods of time and could also affect demand for our products.

Net sales outside of the United States comprised approximately 11% of our total net sales in 2022.

Security Breaches and Other Disruptions or Misuse of Information Systems We Rely Upon Could Affect Our Ability to Conduct Our Business Effectively.

Our information systems and those of our business partners are important to our business activities. We also outsource various information systems, including data management, to third-party service providers. Despite our security measures as well as those of our business partners and third-party service providers, the information systems we rely upon may be vulnerable to interruption or damage from computer hackings, computer viruses, worms or other destructive or disruptive software, process breakdowns, denial of service attacks, malicious social engineering or other malicious activities, or any combination thereof. Attempts have been made to attack our information systems, but we do not believe that material harm has resulted. While we have implemented controls and taken other preventative actions to strengthen these systems against future attacks, we can give no assurance that these controls and preventative actions will be effective. Any breach of data security could result in a disruption of our services or improper disclosure of personal data or confidential information, which could

harm our reputation, require us to expend resources to remedy such a security breach or defend against further attacks or subject us to liability under laws that protect personal data, resulting in increased operating costs or loss of revenue.

We May Not be Able to Successfully Integrate and Operate Businesses that We May Acquire nor Realize the Anticipated Benefits of Strategic Relationships We May Form.

From time to time, we may seek to complement or expand our businesses through strategic acquisitions, joint ventures, and strategic relationships. The success of these transactions will depend, in part, on our ability to timely identify those relationships, negotiate and close the transactions and then integrate, manage, and operate those businesses profitably. If we are unable to successfully do those things, we may not realize the anticipated benefits associated with such transactions, which could adversely affect our business and results of operations.

Any Future Determination that a Significant Impairment of the Value of Our Goodwill Intangible Asset Occurred Could Have an Adverse Effect on Our Results of Operations.

As of December 31, 2022, we had goodwill of $186.3 million on our Consolidated Balance Sheet. Any future determination that an impairment of the value of goodwill occurred would require a write-down of the impaired portion of goodwill to fair value and would reduce our assets and stockholders’ equity and could have a material adverse effect on our results of operations.

Item 1B. Unresolved Staff Comments

None.

Item 2. Properties

The following chart lists our principal domestic and international manufacturing, distribution and office facilities as of December 31, 2022 and indicates the business segment that uses such facilities, the approximate size of such facilities and whether such facilities are owned or leased. Also included in the chart are large warehouses that hold significant inventory balances.

Location

Segment

Type or Use of Facility

Approx. Sq. Ft. (In thousands)

Owned/Leased

Saltillo, Mexico

Residential Heating & Cooling

Manufacturing & Distribution

1,081

Owned

Marshalltown, IA

Residential Heating & Cooling

Manufacturing & Distribution

1,000

Owned & Leased

Orangeburg, SC

Residential Heating & Cooling

Manufacturing & Distribution

900

Owned & Leased

Grenada, MS

Residential Heating & Cooling

Manufacturing & Distribution

395

Owned & Leased

Romeoville, IL

Residential Heating & Cooling

Distribution & Office

697

Leased

McDonough, GA

Residential Heating & Cooling

Distribution

254

Leased

Grove City, OH

Residential Heating & Cooling

Distribution

279

Leased

Concord, NC

Residential Heating & Cooling

Distribution

248

Leased

Pittston, PA

Residential Heating & Cooling

Distribution

144

Leased

Harahan, LA

Residential Heating & Cooling

Distribution & Office

Leased

North Kansas City, MO

Residential Heating & Cooling

Distribution & Office

Leased

West Columbia, SC

Residential Heating & Cooling

Research & Development

Leased

Eastvale, CA