LIGHTPATH TECHNOLOGIES INC - Annual Report: 2005 (Form 10-K)

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended June 30, 2005

or

For the transition period from              to             

Commission file number 000-27548

LIGHTPATH TECHNOLOGIES, INC.

(Exact name of registrant as specified in its charter)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

Class A Common Stock, $.01 par value

Series D Participating Preferred Stock Purchase Rights

(Title of Class)

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities and Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    YES  x    NO  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the registrant is an accelerated filer (as defined in Exchange Act Rule 12b-2)    YES  ¨    NO  x.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    YES  ¨    NO  x.

The aggregate market value of the registrant’s voting stock held by non-affiliates (based on the closing sale price of the registrant’s Common Stock on the Nasdaq SmallCap Market, and for the purpose of this computation only, on the assumption that all of the registrant’s directors and officers are affiliates as well as two parties filing on Form SC 13-G) was approximately $ 6,377,100 as of September 15, 2005.

As of September 15, 2005, the number of shares of the registrant’s Class A Common Stock outstanding was 3,827,500.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s Proxy Statement for the 2005 Annual Meeting of Stockholders are incorporated by reference into Part III of this report.

LightPath Technologies, Inc.

Form 10-K

Table of Contents

- 2 -

PART I

Item 1. Business.

General

LightPath Technologies, Inc. (“LightPath” or “Company”) manufactures optical components and higher level assemblies including precision molded glass aspheric optics, isolators, proprietary fiber-optic collimators, GRADIUM glass lenses and other optical materials used to produce products that manipulate light. We design, develop, manufacture and distribute optical components and assemblies utilizing advanced optical manufacturing processes. Our products are incorporated into a variety of applications by our customers in many industries, including defense products, medical devices, barcode scanners, optical data storage, hybrid fiber coax (datacom and telecom), machine vision and sensors, among others. All the products that we produce enable lasers and imaging devices to do their jobs:

LightPath was incorporated under Delaware law in June 1992 as the successor to LightPath Technologies LP, a New Mexico limited partnership formed in 1989, and its predecessor, Integrated Solar Technologies Corporation, a New Mexico corporation, organized in 1985. We completed an initial public offering of our common stock in 1996. From our inception in 1985 until June 1996, we were classified for as a “development stage enterprise” that primarily engaged in basic research and development with an initial objective to improve solar energy technology. Over time, we expanded our attention to other optics applications using GRADIUM glass lenses.

During fiscal 1998, we reorganized our sales and marketing efforts with the purpose of expanding our attention to include markets such as optoelectronics and photonics due to the number of potential customer inquiries into the ability of GRADIUM glass to solve optoelectronic problems, specifically in the areas of fiber telecommunications. Simultaneously, we developed a strategy to enter the telecom optical components market using a concept of automated production of telecom components using laser fusion and fiber attachment techniques we developed. Our now patented laser fusion and fiber attachment techniques are substantially automated and we believe these techniques provided improved quality and production flexibility. Our automation theme was expanded with our fiscal 2000 acquisition of Horizon Photonics, Inc. (“Horizon”), a California corporation originally founded in July 1997, where we acquired the use of robotic systems in manufacturing isolators.

Horizon utilized automated production platforms to manufacture passive optical components for the telecommunications and data communications markets. We acquired all of the outstanding shares of Horizon for approximately 175,000 shares of our Class A common stock and $1 million in cash (an aggregate purchase price of approximately $40.2 million, based on the then-market price of our common stock). Horizon manufactured isolator products in California prior to May 2003 when the site was consolidated with the facilities in Orlando, Florida. The Horizon legal entity was dissolved during fiscal 2004.

In September 2000, we acquired Geltech, Inc. (“Geltech”), a Delaware corporation originally founded in May 1985. Geltech is a manufacturer of precision molded glass aspheric optics, which have broad applicability to numerous application markets. Precision molded glass aspheric optics are also used in the active telecom components market to provide a highly efficient means to couple laser diodes to fibers or waveguides. We acquired all of the outstanding shares of Geltech for approximately 103,000 shares of our Class A common stock and approximately $1 million in acquisition costs (an aggregate purchase price of approximately $28.5 million, based on the then-market price of our common stock). We manufacture these products at our facility in Orlando, Florida. During fiscal 2002, we expanded the Orlando manufacturing facility, and in fiscal 2003, in order to reduce costs, we relocated our corporate headquarters to Orlando and reorganized our manufacturing facility there to accommodate all of the production previously performed in New Mexico for GRADIUM glass lenses and collimators as well as the isolator product line from California.

From 1998 until 2002, the our intense pursuit of optoelectronics and photonics applications led it to become heavily reliant on the telecommunications capital equipment market, which went through a rapid and substantial increase and a similarly rapid and substantial decline in these five years. This drove our product development and acquisition strategies during this time and led to an increase in reported revenues from under $1 million to over $26 million and then to a decline to under $7 million in fiscal 2003. As a result of activities during this five-year period, we found it necessary to reduce costs significantly by consolidating all production and corporate headquarters in Florida. Once we consolidated all Company operations to one site under one management group and with one sales force, we determined that our former operating segments of Optical Lenses and Laser Components were no longer reportable operating segments and, as such, we operate a single business with the aforementioned optical component product lines.

- 3 -

Business Strategy

Our strategy is to diversify away from strictly telecom markets toward our traditional optics customer base, which represents over 1,000 companies engaged in a wide variety of markets. We had not emphasized applications with these customers during the telecommunications boom and we are working diligently to service and participate in the development of their next generation of applications and products. We continue to serve a number of telecom customers, most of them are in a broader market of communications, including datacom, hybrid-fiber coax and wireless communications.

Because complex customer application systems can contain many optical components and our products can be utilized to reduce the number or type of lens elements in such systems, we believe that our products can simplify the design and improve the performance of such complex optical systems. However, design and production of an optical product is a lengthy process, and it may take years for producers to redesign complex optical systems using our products, reconfigure the product housing, re-engineer the assembly process and initiate commercial quantity orders for our products. Accordingly, we intend to focus our long-term marketing efforts on emerging industries, such as medical devices, barcode scanners, optical data storage, machine vision, sensors and performance-driven industries that are seeking to optimize performance of new and existing optical products.

Molded Aspheres

We have rights under a royalty-free perpetual license to the Precision Molded Optics process originally developed by Corning, Inc., whose business in this field we acquired in 1994. Products manufactured using this technology include glass aspheric lenses, sub-millimeter lenses and lens arrays. These products include wafer-scale molded glass aspheric lenses, anamorphic lenses and hybrid optical components and our Infrared molded optics introduced during 2005.

Our molded glass aspheres are used in a wide variety of laser and imaging applications in optical data storage, high precision printing, barcode scanning, environmental monitoring, machine vision, sensors, laser-to-fiber coupling, and medical equipment. We continue to aggressively pursue new sales opportunities in, for example, the application areas of medical devices, anamorphic corrections and infrared imaging.

We continue to sell aspheric lenses for various communications applications. Glass aspheric lenses and lens arrays are used to perform two major tasks. One is the collimation of light as it emerges from the fiber. The second major task is coupling and focusing light at the output of a laser diode to a fiber or waveguide. Glass provides high performance and wavelength stability over fluctuating temperature.

Isolators

We have developed a family of products that utilize a proprietary micro-fixture design and robotic platform processes. This automated process allows for micro-optics to be mounted in small transferable fixtures that are processed in arrays and converted into a variety of optical components and component subsystems. This flexible platform is capable of producing a variety of finished products including isolators. We are manufacturing a qualified family of free-space, laminate and custom isolators. We sell isolator assemblies for applications in all communications markets. This line is based on a manufacturing platform that can address a wide range of customer specifications, while supporting lower cost applications. Sales of isolators improved in fiscal 2005 and we continue to serve the communications market while working towards sales into other market applications.

Collimators

During 1998, we began the development of products for the then-emerging optoelectronics markets, specifically in the areas of fiber telecommunications. Our standard collimator products provide higher performance in back reflection and insertion loss and can withstand in excess of 10 watts of optical power. Customers have passively tested our collimators to over 100 watts in the forward direction. The process to manufacture these collimators uses patented laser fusion technologies and robotics. These products may incorporate aspheric molded optics and GRADIUM lenses. During 1999 and 2000, we expanded this product line, demonstrating to the telecommunication optical components industry that we can provide low-cost products and solutions to meet their telecom-related collimator needs. Beginning in 2001, the telecom equipment market slowed dramatically, reducing the demand for the optical components segment of the market. During fiscal 2004 we introduced seven new ruggedized collimators for use in high-power ND:YAG beam delivery units including fiber lasers. Due to the decline of this initial market segment, we pursued investigating other opportunities incorporating our unique patented laser fusion technology and began selling new high power collimators during fiscal 2005.

GRADIUM Lenses

GRADIUM glass was developed by us beginning in 1985 and is an optical quality glass material with axially varying refractive index, capable of reducing optical aberrations inherent in conventional lenses and performing with a single lens tasks traditionally performed by multi-element, conventional lens systems. Typical applications include surgical lasers, high power YAG lasers for

- 4 -

welding, cutting and marking, defense-market uses, and test and measurement. Because GRADIUM glass can concentrate light transmission into a much smaller focal spot than conventional spherical lenses, we believe that GRADIUM glass has the ability to improve the current standards of laser performance in some applications.

Our growth strategy continues to be to increase our emphasis on key laser market niches in the U.S., Europe and Asia to establish the necessary products and partnership alliances to sell into these markets. In the fourth quarter of fiscal 2002 we sold some of our GRADIUM production equipment to an Asia/Pacific company as part of a licensing agreement whereby they will manufacture GRADIUM glass for LightPath and distribute lenses to their own customers in Asia/Pacific. This agreement was renegotiated in fiscal 2003, whereby we obtain a royalty for their GRADIUM sales and we will maintain U.S. GRADIUM. Distribution agreements are in place with specialty distributors to further assist in obtaining penetration into the high-power YAG laser and high performance lens end-markets.

Optical Assemblies

We are currently producing optical assemblies based on our proprietary technologies. We are working to design, build and sell optical assemblies into the markets for test and measurement, medical devices, military, industrial and communications. Our efforts, particularly in the medical devices, military and industrial markets, have resulted in revenue increases of over 40% compared to fiscal 2004.

Sales and Marketing

Extensive product diversity and varying levels of product maturity characterize the optics industry. Product markets range from consumer (e.g., cameras, copiers) to industrial (e.g., lasers, data storage, infrared imaging), from products where the lenses are the central feature (e.g., telescopes, microscopes, lens systems) to products incorporating lens components (e.g., robotics, semiconductor production equipment) and communications (various optics are required for bandwidth expansion and improved data transfer for the optical network). As a result, the markets for our products are highly segmented and no single marketing approach will allow us to access all available market segments.

From fiscal 1998 to fiscal 2002, when our sales and marketing strategy was designed to capitalize on the growing demand for optical components for telecom. Since that period, there have been substantial changes in our organization, structure and sales strategies. Because we rely on multiple markets and market segments to diversify our sales base, we have made necessary changes in our sales force and sales strategies to strengthen our sales presence in markets we deliver value to.

Sales Organization

Our sales staff is trained to promote and sell all of our product lines to our customers. In order to be more accessible to potential customers we have divided our sales staff into the following territories:

In addition, we have formalized relationships with twelve industrial, laser, optoelectronics and medical component distributors located in foreign countries and in the U.S. to assist in distribution of our products geographically outside the United States and in highly specific target markets. Because the optics industry is highly fragmented, we utilize these distributors, certain catalog distributors, our own catalog and our internet site (www.lightpath.com) as vehicles for broader promotion of our products. We make limited use of print media advertisements in various trade magazines and participate in appropriate domestic and foreign trade shows.

Trade Shows

We have displayed our product line additions and enhancements at one or more trade shows each year. For example we participated in Photonics West in January 2005 and SPIE East in April 2005. We introduced two new products at these shows, a line flexible beam expanders and long wavelength infrared aspheric lenses, which are examples of how we believe LightPath can provide added value to our customers. We also attended CLEO and shows in Europe and Asia. Such a strategy also underscores LightPath’s strategic directive of broadening our base of innovative optical components and assemblies. These shows provide an opportunity to meet with potential customers, to distribute information and samples of our products and to discuss test results from samples previously sent.

New Products

During fiscal 2005 we introduced a new proprietary lead free glass ECO550 used for precision molded aspheric lenses. The European Parliament has established a specification, RoHS (Restriction of Hazardous Substances) and the Japanese have established “Green” requirements in 2003, for the elimination of certain hazardous substances used in electronic equipment, RoHS takes effect July 2006, “Green” is in effect now. ECO550 glass is both RoHS and “Green” compliant and contains virtually no lead or other restricted materials.

- 5 -

We introduced collimating lenses designed for 405 nm blue laser diodes. The new glass molded aspheric lens is designed for use with the new Nichia^® blue diode laser, and is designed and manufactured to extremely stringent optical standards. The effort from both engineering and manufacturing required improved beam quality, which is particularly difficult for shorter wavelength lasers. These lenses are also applicable to other blue laser manufactures applications.

We announced the ability to mold long-wavelength infrared (LWIR) aspheric optics; this new product line is called the Black Diamond (TM). Traditionally these aspheric lenses have been limited to visible and near-infrared wavelengths. Recent advances in optical materials now provide a common technology path to produce molded long-wavelength infrared (LWIR) aspheric optics over the wavelength range of 1 to 14 microns. LightPath’s Black Diamond(TM) technology enables high performance, cost-effective LWIR molded aspheric lenses. Traditionally, infrared optics rely on individually diamond turned or other lengthy manufacturing methods. Utilizing aspheric optics significantly reduces the number of lenses required for typical thermal imaging systems. These LWIR lenses are used in a variety of markets including defense, industrial, commercial and automotive applications.

We introduced a new line of flexible beam expanders. The new beam expanders are used in a variety of optical applications in the industrial, medical, defense and instrumentation markets including metrology, laser delivery systems, LIDAR and beam conversion. Unlike conventional beam expanders, the new flexible beam expanders incorporate a single-mode or polarization-maintaining fiber between the input and output lenses. By using the fiber, the input and output beams can be positioned independently from one another, allowing the freedom to mount the beam expander in tight spaces that normally would require a series of free space optics.

Our efforts in new product development are intended to broaden our capabilities to service market areas in addition to the communications markets, where our customers ask for more demanding optical performance. In addition to the products mentioned above, we are skilled at designing and producing of optical assemblies that combine two or more of our current components, such as molded aspheres and an isolator, into a subassembly. We believe these optical assemblies, which solve multiple optical problems in one package, have the future potential to produce higher gross profit margins for us than individual components.

Competition

The market for optical components generally is highly competitive and highly fragmented. We compete with manufacturers of conventional spherical lens products and optical components, providers of aspheric lenses and optical components and producers of optical quality glass. To a lesser extent, we compete with developers of radial gradient lenses and optical components. Most of these competitors have greater financial, manufacturing, marketing and other resources than we do.

We believe we can be successful in procuring business because of our unique capabilities in optical design engineering that we make available on the merchant market. Additionally, we believe that we offer value to some customers as a second or backup source of supply in the United States should they be unwilling to commit all of their source of supply of a critical component to a foreign production source. We also continue to have the proprietary GRADIUM lens glass technology and the ability to make unique, elemental-impregnated porous-silica optical media that can be used in various test and measurement and sensing applications.

Manufacturers of conventional lenses and optical components include corporations such as Eastman Kodak Corporation, Nikon, Olympus Optical Company, Carl Zeiss and Leica AG. In addition to being substantial producers of optical components, these entities are also some of the primary customers for such components, incorporating them into finished products for sale to end-users. Consequently, these competitors have significant control over certain markets for our products. In addition, although these companies do not manufacture axial gradient lenses, and although we believe that we have substantial technological expertise in this field, these companies could rapidly pursue development of axial gradient products, in light of their substantial resources. In addition, our products compete with other products currently produced by these manufacturers.

Aspheric lenses

Manufacturers of aspheric lenses provide significant competition for our molded glass aspheric lenses in providing products that improve the shortcomings of conventional lenses. Aspheric lens system manufacturers include Eastman Kodak Corporation and Hoya Corporation. The use of aspheric surfaces provides the optical designer with a powerful tool in correcting spherical aberrations and enhancing performance in state-of-the-art optical products. Plastic molded aspheres, on the other hand, allow for high volume production, but primarily are limited to low cost consumer products that do not place a high demand on performance (such as plastic lenses in disposable or mobile phone cameras). Molded plastic aspheres appear in products that stress cost as their measure of success over performance and durability.

- 6 -

To a limited extent, our GRADIUM material competes with manufacturers of other gradient index lens materials. Currently, processes to produce gradient index materials include ion-exchange and chemical vapor deposition, both of which produce small radial gradient index rods with limited applications. Manufacturers using these processes include Nippon Sheet Glass, Olympus Optical Company, and Gradient Lens Corporation.

Isolators

We compete with a few specific players in the isolator segment of the components market. These include Namiki, TDK, Tokin, Kyocera, Sumitomo and Kaifa (JDS Uniphase). Our strategy does not involve direct competition with the “catalog” offerings of these companies; rather, we focus our efforts on designing and manufacturing specialty and hybrid components according to particular OEM specifications.

Collimators

There are currently only a handful of direct competitors for our collimating lenses and collimators. Nippon Sheet Glass currently supplies the majority of collimator lenses. The collimator lens is a separate business from Nippon Sheet Glass’s primary product, automotive glass. Our collimator competes against existing collimator assemblies, which are produced by Casix (acquired by JDS Uniphase), DiCon Fiberoptics, Samsung Electronics, Wave Optics and Oz Optics. There are also a number of companies that assemble their own collimators, such as JDS Uniphase. Some of these competitors have greater financial, manufacturing, marketing and other resources than LightPath.

Manufacturing

Molded Aspheres and GRADIUM

All of our manufacturing is done in a 41,000 square foot production facility in Orlando, Florida. With unused space remaining in this facility, we believe our space is adequate to accommodate foreseeable needs of the Company. The facility features areas for each step of the manufacturing process including tooling and coating work areas, pre-form manufacturing, and a clean room for pressing and integrated assembly. The production facility retains an emphasis on automation, particularly in the isolator and collimator lines moved from California and New Mexico, respectively, in fiscal 2003. The facility includes new product development labs and space that include development and metrology equipment.

The molded glass asphere manufacturing area includes lens pressing equipment, high precision mold production equipment, advanced metrology and inspection equipment and coating facilities. The plant also features a tooling and machine shop, which can support: new product development; commercial production requirements for our lens holders; and the fabrication of proprietary press workstations and mold equipment.

In Orlando, we have furnaces to produce boules and glass coring equipment for our current needs of GRADIUM for our sales in the U.S. and Europe. We also obtain GRADIUM boules from Hikari Glass in Japan, from whom we have an agreement to obtain a royalty for their sales of GRADIUM in Asia/Pacific.

We are ISO 9000:2001 certified. Much of our product qualification is performed in-house. Our test and evaluation capabilities include Damp Heat, High/Low Temp Storage, and a Thermal Shock Oven, which are representative of the equipment required to meet Telcordia requirements and other customer required product specifications. Our New Product Development department has CAD tools and technical support. The continuing implementation of various statistical process controls (SPC’s) is being pursued to improve product yields and allow us to reduce costly manual testing operations. Quality control in manufacturing to ensure a quality end product is critical to our ability to bring our products to market as our customers demand rigorous testing prior to their purchase of our products.

Isolators

In our Orlando clean room, our isolator manufacturing equipment includes dual beam laser welding stations, sub-micron alignment engines, robotic assembly stations, automated dispensing systems and precision dicing equipment. The primary benefits of our approach to manufacturing are (i) reduced costs as a result of higher yields and throughput, and (ii) product consistency as a result of eliminating manual labor. We believe we are the only manufacturer of free-space isolators currently using automated manufacturing.

Collimators

Our collimator assembly workstations in our Orlando clean room include our proprietary laser fusion and housing equipment, automated testing processes, and laser polishing stations.

- 7 -

Subcontractors and Strategic Alliances

We believe that low-cost manufacturing will be crucial to our long-term success. In that regard, we have generally used subcontractors in our production process to accomplish certain processing steps requiring capabilities that are specialized and that we have never acquired. For example, we presently use a number of qualified subcontractors for fabricating some lenses, polishing certain lenses where required, and coating them.

Our proprietary GRADIUM boules are produced by an Asia/Pacific partner under agreement with us, which remits a royalty to us for its sales to customers in Asia/Pacific. This arrangement allows our product to gain sales exposure in Asia/Pacific and provides us with a second source for boule production.

We have taken steps to protect our proprietary methods of repeatable high-quality manufacturing by patent disclosures and internal trade secret controls.

Suppliers

We utilize a number of glass compositions for the manufacture of our molded glass aspheres and lens array products. However, one such glass is a glass composition licensed from and manufactured by Corning, Inc. and represents a substantial majority of our molded aspheric lens production. Corning is currently our sole source for this glass composition. We believe that a satisfactory supply of this Corning composition will continue to be available at competitive prices, although there can be no assurance in this regard. Additional sources of other glass compositions are available. We have tested selected compositions and have established a sourcing relationship with a cost effective supplier.

Base optical materials, used in both GRADIUM and collimator products, are manufactured and supplied by a number of major optical and glass manufacturers. Optical fiber and collimator housings are manufactured and supplied by a number of major manufacturers. We believe that a satisfactory supply of such production materials will continue to be available at reasonable prices, although there can be no assurance in this regard.

We also rely on local and regional vendors for component materials and services such as chemicals and inert gases, specialty ceramics, UV and AR coatings, and other specialty coatings. To date, we have found a suitable number of qualified vendors for these materials and services.

We currently purchase a few key materials from single or limited sources. The polarizing glass used in our isolator products is supplied by Corning and Hoya. To date, we have been able to acquire an ample supply of polarizing glass. Garnet and other crystals used in our isolator products are provided by a number of vendors, including Sumitomo, TDK and Triquint. Available quantities and adequate pricing of garnet is available in the open market. We believe that a satisfactory supply of production materials will continue to be available at competitive prices, although there can be no assurance in this regard.

We rely on local and regional vendors for component materials such as housings, fixtures and magnets. In addition, certain products require external processing such as brazing and metalization. To date, we have found a suitable number of qualified vendors.

Patents and Other Proprietary Intellectual Property

Our policy is to protect our technology by, among other things, patents, trade secret protection, trademarks and copyrights. The products and technologies that we employ use patents that are both owned and maintained by us and licensed to us by others. Patents have been issued, and/or patent applications have been filed, in the areas of glass composition, glass molding, gradient geometries, and certain production processes such as fiber attachment, robotic assembly and micro-fabrication. The first of our issued patents expires in 2006; the remainder expire at various times through 2019. We do not expect a material effect to result from the expiration of the patent in 2006. Patent applications corresponding to some our U.S. applications have been filed in the patent offices in Europe and Japan pursuant to the Patent Cooperation Treaty. Under the Patent Cooperation Treaty, a patent applicant may file one patent application and have it acknowledged as an accepted filing in as many member nations to the Patent Cooperation Treaty as the applicant elects.

In addition to patent protection, certain process inventions, lens designs and innovations are retained as trade secrets. A key feature of GRADIUM glass is that, once fabricated, it does not reveal our formula upon inspection and, to our knowledge, cannot be reverse-engineered.

LightPath^® is registered as a service mark in the United States and GRADIUM^® and Polycoat^® are also registered trademarks. Other trademarks are held out and used by us under common law, such as Circulight^TM.

Issued patents owned or available to us may not afford adequate protection to us or may be challenged, invalidated, infringed or circumvented. Patent applications relating to our products may not result in patents being issued. Patent rights granted to us for technologies that we may license in the future may not provide competitive advantages to us. Patents that are owned or licensed by us that are issued in one jurisdiction may not be issued in any other jurisdiction. The validity of any of our patents may not be upheld if challenged by others in litigation or if such litigation alleges that our activities infringe upon patents owned by others.

- 8 -

Others may have independently developed or will independently develop and patent similar or superior products and technologies, duplicate any of our products or technologies or design around our patents. There may be patents issued to others that will adversely affect the development or commercialization of our products or technologies. We do not have an insurance policy for patent infringement liability coverage for costs or damages relating to claims of infringement. We could incur substantial costs in defending suits brought against us, or any of our licensees, or in suits in which we may assert that our patent or patents provide us with rights against others or in suits contesting the validity of a patent. Any such proceedings could be protracted. In addition, there can be no assurance that we would be successful in defending our patent rights in any future infringement action. If the outcome of any such litigation is adverse to our interests, our business may be materially adversely affected.

We do not believe that any of our products or processes infringe any U.S. or foreign patent rights of any other party; however our products or processes may infringe or be found to infringe on another party’s U.S. or foreign patent, or patent application. Patent applications in the United States are maintained in secrecy until the earlier of 18 months or the patent is issued. We could incur substantial costs in defending ourselves in infringement litigation brought by others, or in prosecuting infringement claims against third parties. An adverse party claiming patent or copyright infringement might assert claims for substantial damages or seek to obtain an injunction or other equitable relief, which could effectively block the ability for us to make, use, distribute and sell products.

We also rely on trade secrets and proprietary know-how. We seek to protect our trade secrets and proprietary know-how, in part, by confidentiality agreements with our employees, consultants and customers. However, our confidentiality agreements may be breached and we may not have adequate remedies for any breach. Some of the confidentiality agreements that we rely upon will expire in the next few years. Others may independently develop technology or processes substantially equivalent to or better than our technology or processes and our trade secrets may otherwise become disclosed to or independently discovered by our competitors.

Environmental and Governmental Regulation

Currently, emissions and waste from our present manufacturing processes are at such low levels that no special environmental permits or licenses are required. In the future, we may need to obtain special permits for disposal of increased waste by-products. The glass materials we utilize contain lead and other toxic elements in a stabilized molecular form. However, the high temperature diffusion process results in low-level emissions of such elements in gaseous form. If production reaches a certain level, we believe that we will be able to efficiently recycle certain of our raw material waste, thereby reducing disposal levels. We believe that we are presently in compliance with all material federal, state and local laws and regulations governing our operations and have obtained all material licenses and permits necessary for the operation of our business.

We utilize certain chemicals, solvents and adhesives in our manufacturing process. We believe we maintain all necessary permits and believe we are in full compliance with all applicable regulations.

To our knowledge there are currently no federal, state or local regulations that restrict the manufacturing and distribution of our products. Certain end-user applications require that the complete optical systems receive government approval, such as U.S. Food and Drug Administration approval for use in endoscopy. In these cases, we will generally be involved on a secondary level and the OEM customer will be responsible for the license and approval process.

New Product Development

For many years, we were engaged in basic research and development that resulted in the invention of GRADIUM glass and certain proprietary processes for fabricating GRADIUM glass lenses. Thereafter, new product development efforts were broadened or acquired that led to the development of our capabilities in molded aspheric lenses, isolators and collimators. Today, however, as part of our cash conservation strategy, we conduct no basic research and development. Our efforts in this area are concentrated on product development to support existing and new customers in the design and manufacture of items in our three basic product lines: lenses, isolators and collimators.

As a result, our present new product development efforts are focused on markets that include Infrared Optics for imaging, blue lens applications, YAG lasers, defense, medical devices, barcode scanners, optical data storage, machine vision, sensors and environmental monitoring. We incurred expenditures for new product development during the fiscal years, 2005, 2004 and 2003 of $985,357, $1,022,299 and $2,801,709 respectively. We currently plan to expend approximately $1.0 million for new product development during fiscal 2006, which could vary depending upon revenues levels, customer requirements and market opportunities perceived.

- 9 -

Employees

At July 31, 2005, we had 100 full-time equivalent employees, primarily in Florida. Any employee additions or terminations over the next twelve months will be dependent upon the actual sales levels realized during fiscal 2006. Eight of our employees are engaged in management, administrative and clerical functions, 9 in new product development, 11 in sales and marketing and 72 are in production and quality functions. Additionally we had 15 persons on temporary or contractor status. We have used and will continue utilizing part-time help, temporary employment agencies and outside consultants, where appropriate, to qualify prospective employees and to ramp up production as required from time to time. None of our employees is represented by labor unions.

Executive Officers

As of August 2005, the following individuals are serving as executive officers:

Kenneth Brizel has served as a Director of LightPath, CEO and President since July 2002. Mr. Brizel has spent more than 20 years in the communications and microelectronics industries. From October 2000 until July 2002 he was Senior Vice President Strategy and Business Development for Oplink Communications. From April 1997 to September 2000, Mr. Brizel was Director of Strategic Marketing for Optoeletronics and Network Communications Integrated Circuits groups within Lucent Microelectronics. Mr. Brizel’s diverse experiences include assignments at RCA/GE, Lucent/Agere, Mostek and Star Semiconductor before joining Oplink. His responsibilities spanned sales, engineering, marketing strategy and business development. Mr. Brizel received his Bachelor of Science and Master of Science degrees in Electrical Engineering from Rensselaer Polytechnic Institute in Troy, New York.

Robert Burrows has been Chief Financial Officer, Secretary and Treasurer since March 2005. Mr. Burrows has served as a CFO for both public and private companies and was engaged as CFO for Action Products International, Inc. a designer and marketer of educational and non-violent toy products from July 2001 to March 2005. He served from 1999 to 2001 as Chief Financial Officer of Lawgic Publishing, a venture funded internet application service provider of intelligent legal software. Prior to this he held various financial and operational positions with companies such as General Electric, Lockheed Martin and HBO & Co. Mr. Burrows earned an M.B.A. from the Rollins College—Crummer School of Business and a Bachelor of Science in accounting and finance from the University of Virginia.

James Magos has been our Senior Vice President of Sales since August 2003. From January 1999 to August 2003, Mr. Magos was Vice President and Chief Operating Officer for Cardinal Components Inc., a crystal manufacturer. Earlier, he served as Vice President of Sales & Marketing for IQ Systems, Inc. and in other sales and marketing roles for Star Semiconductor, Logic Device Corporation, and Harris Semiconductors (Intersil). Mr. Magos earned his Bachelor of Science in Business Management from Long Island University and attended management training at the University of Pennsylvania’s Wharton Business School.

Edward Patton has been our Vice President of Marketing since January 2003. He joined LightPath’s Geltech sales and marketing group in 1998. Mr. Patton has held a variety of senior positions in the photonics industry with firms that have marketed products including optics, detectors, thin-film filters, and laser diodes into such markets as medical, industrial, defense and communications. Mr. Patton has served as Vice President Sales and Marketing at both EG&G Optoelectronics and Graseby Electro-Optics and served as President and General Manager of Graseby Infrared. Mr. Patton earned his Bachelor of Science from Northeastern University.

Robert Reichert has been our Vice President of Operations since March 2004. From April 2001 to October 2003, he was the COO of Covega, a high-tech, optoelectronic components manufacturer and from 1981 to April 2001 he was a manufacturing executive for Allied-Signal/ Honeywell at their Centers for Microelectronic Technology and Solid State Electronics. Mr. Reichert has earned the Six Sigma Quality System “Black Belt” designation with training and experience in related disciplines such has lean manufacturing, total quality, integrated supply chain management, and other plant floor productivity initiatives. Mr. Reichert earned his Bachelor of Science in Business Management from the University of Maryland.

Risk Factors

The following risk factors should be read by you together with the more detailed information included at other sections of this Form 10-K. You should understand that it is not possible to predict or identify all such risk factors. Consequently, you should not consider this list to be a complete statement of all potential risks or uncertainties. An investment in our common stock is extremely risky. You should carefully consider the following risk factors and other information in this Form 10-K before investing in our common stock. Our business and the results of operations could be seriously harmed by any of the following risks. The trading price of our common stock could decline due to any of these risks, and you may lose part or all of your investment.

There are forward-looking statements in these risk factors and elsewhere in this report. We use words such as “believe”, “expect,” “anticipate,” “plan” or similar words to identify forward-looking statements and any statement relating to plans, intentions, expectations or other forward-looking expression is a forward-looking statement. Forward-looking statements are made

- 10 -

based upon our belief as of the date that such statements are made and are based largely on our current expectations and are subject to a number of risks and uncertainties, many of which are beyond our control. You should not place undue reliance on these forward-looking statements, which speak as of the date of this report. While we may make other forward-looking statements either orally or in writing in the future, we do not assume the obligation to update any forward-looking statement. The following risk factors are intended to be cautionary statements identifying important factors that could cause actual results to differ materially from those in the forward-looking statements.

Our fiscal year ends on June 30 and references to years in this Form 10-K refer to our fiscal year ended as of June 30 of the referenced calendar year.

A. Risks Related To Our Business and Financial Results

We Have Substantial Cash Requirements and May Need External Financing To Fund Our Operations. While we have raised capital recently and while we continue to take actions to reduce cash used in operations, there can be no assurance that we will generate sufficient cash to fund our future operations and growth strategies. We may need to obtain additional external financing in the future. We do not have any commitments from others to provide additional financing in the future, and there can be no assurance that any such additional financing will be available if needed or, if available; will be on terms favorable to us. In the event any such financing is not obtained, our operations will be materially adversely affected and we could be forced to cease or substantially reduce operations. Any additional equity financing may be dilutive to shareholders, and debt financings, if available, may involve substantial restrictive covenants or require the pledging of substantially all of our assets.

In fiscal 2005, we made progress in reducing operating cash outflow. The Company’s cash used in operations was approximately $1.1 million compared to $2.5 million used in fiscal 2004. Our cash flow projections for the 2006 fiscal year indicate we have sufficient cash available to fund our operations for at least the next twelve months. However, the operating plans and financial projections may not be fully achieved. Factors which could increase cash used in future quarters include, but are not limited to, a decline in revenue, collectibility issues with regard to accounts receivable, increased material costs, increased labor costs, increased health insurance and benefits costs and increases in discretionary spending.

Should we find it necessary to raise more capital, in addition to the capital raised in June 2005, we may find that such funds are either not available or are available only on terms that are unattractive in terms of cost or dilution of existing shareholders’ interests, or both. In the event that we find it necessary to raise additional funds to sustain operations and we are unable to do so, we may need to take such actions as additional restructuring of operations to reduce costs, or to discontinue operations altogether. Should that occur, the realizability of our assets, especially inventory, property and equipment, intellectual property and other intangible assets may be such that significant adjustments to our consolidated financial statements would be required.

We Have A History Of Losses And If We Continue To Incur Losses Our Business May Fail. We have incurred net losses of $3.5, $5.6 million and $21.2 million for fiscal 2005, 2004 and 2003, respectively, and we had an accumulated deficit of $186.3 million as of June 30, 2005. We expect to continue to incur significant sales and marketing, administrative and product development expenses, and, as a result, we will need to generate increased revenues to achieve profitability. Even if we achieve profitability, given the competition in our optical markets, we may not be able to sustain or increase profitability thereafter on a quarterly or annual basis. As a result, we will need to generate significantly higher revenues while containing costs and operating expenses if we are to achieve profitability.

Our Failure to Maintain Compliance With Certain Listing Criteria Of Nasdaq Could Adversely Affect the Value of Our Common Stock. Our common stock is currently traded on the Nasdaq SmallCap Market (SCM). Going forward, failure to meet the applicable quantitative and/or qualitative maintenance requirements of Nasdaq could result in our securities being delisted entirely from Nasdaq. Moreover, Nasdaq has sole discretion in changing the initial and continued listing criteria for its markets, and such changes usually tend to tighten or toughen the standards, not to reduce them. Therefore, there can be no assurance that Nasdaq will not change the SCM continued listing criteria in the future such that we might no longer qualify for listing on the SCM. In the unlikely event we are delisted entirely from Nasdaq, our securities may be eligible for trading on the OTC Bulletin Board or on other unlisted markets such as The Pink Sheets, although there can be no assurance that our securities will be eligible for trading on any alternative exchanges or markets. As a consequence of such delisting, an investor could find it more difficult to dispose of or to obtain accurate quotations as to the market value of our securities. Among other consequences, delisting from Nasdaq may cause a decline in the stock price and difficulty in obtaining future financing.

Because Of Our Dependence On A Few Key Customers, The Loss of Any Key Customer Could Cause A Significant Decline In Our Revenues. In fiscal 2005, Intel Corporation (“Intel”) accounted for approximately 13% of our net revenue and our top five customers accounted for approximately 37% of our revenues. In fiscal 2004 and 2003, Intel accounted for 16% and 10% of our net revenue, respectively. Part of our strategy in fiscal 2005 was to gain key customer relationships of more significance and impact to generate higher revenues at lower costs. This strategy has met with some success and therefore we believe that that our operating results will continue to be notably dependent on sales to a relatively small number of significant customers. The loss of any of these customers, or a significant reduction in sales to any such customers, would adversely affect our revenues.

- 11 -

Order Cancellations And Extensions Of Product Shipment Dates By Customers Can Hinder Our Ability To Achieve Profitability. Our sales are generally made pursuant to purchase orders that are subject to cancellation, modification or rescheduling without significant penalties to our customers. In recent years, we have experienced material order cancellations and significant extensions of product shipment dates by some of our customers. If current customers stop placing orders, or unexpectedly reduce orders, we may not be able to replace these orders with orders from new customers and our ability to achieve profitability will be adversely affected. The majority of our current customers do not have any minimum purchase obligations, and they may stop placing orders with us at any time, regardless of any forecast they may have previously provided.

Our New Market Penetration Efforts Are At An Early Stage Of Development And May Not Prove Successful. Our efforts to diversify our sales to additional optical applications in multiple industries are still in an early phase and our current line of products has not generated sufficient revenues to sustain our operations. While we believe our existing products are commercially viable, we anticipate the need to educate the optical components markets in order to generate market demand and market feedback may require us to further refine these products. Development of significant additional product lines will require significant further research, development, testing and marketing prior to commercialization. There can be no assurance that any proposed products will be successfully developed, demonstrate desirable optical performance, be capable of being produced in commercial quantities at reasonable costs or be successfully marketed.

Some Of Our Products Have Not Been Demonstrated To Be Commercially Successful. Although our optical lens products have been accepted commercially, the benefits of the GRADIUM glass line are not widely known and must be introduced as we can afford in markets that we believe would benefit from the performance characteristics of GRADIUM. Many prospective customers will need to make substantial expenditures in order to redesign products to incorporate our GRADIUM lenses. There can be no assurances that potential customers will view the benefits of our products as sufficient to warrant such design expenditures.

Our collimator products have not yet achieved broad commercial acceptance; our isolator production capability and sales, while encouraging at this point, are only five years old; and some of our molded aspheres applications are new. There can be no assurance that any of these will be commercially viable products or produce significant revenues. Further, there is no assurance that any products currently existing or to be developed in the future will attain sufficient market acceptance to generate significant additional revenues that are necessary for our success. We must also satisfy industry-standard Telcordia testing on telecommunication products to meet customer requirements, as well as satisfy prospective customers that we will be able to meet their demand for quantities of products, since we may be the sole supplier and licensor. We do not have lengthy experience as a manufacturer for all our product lines and have limited financial resources. We may be unable to accomplish any one or more of the foregoing to the extent necessary to develop commercially successful market acceptance of our products.

Our Relatively Short Operating History May Hinder Our Ability To Accurately Forecast Revenues And Expenses. Although almost 20 years old, LightPath has only generated significant revenues (higher than $5 million per year) since fiscal 2000. Through fiscal 1996, our primary activities were basic research and development of glass material properties. Because of this short and highly variable operating experience and the turnover in management in the last three years, we have in the past and may in the future be unable to accurately forecast our revenues from sales of our products, and we have limited meaningful historical financial data upon which to plan future operating expenses. Many of our expenses are fixed in the short term, and we may not be able to quickly reduce spending if our revenue is lower than we project. New product introductions will also result in increased operating expenses in advance of generating revenues, if any. Therefore, net losses in a given quarter could be greater than expected. Failure to accurately forecast our revenues and future operating expenses could cause quarterly fluctuations in our operating results, including cash flows, and may result in further volatility of or a decline in our stock price.

If We Are Unable To Develop And Successfully Introduce New And Enhanced Products That Meet The Needs Of Our Customers, Our Business May Fail. Our future success depends, in part, on our ability to anticipate our customers’ needs and develop products that address those needs. Introduction of new products and product enhancements will require that we effectively transfer production processes from research and development to manufacturing and coordinate our efforts with the efforts of our suppliers to rapidly achieve efficient volume production. If we fail to effectively transfer production processes, develop product enhancements or introduce new products that meet the needs of our customers as scheduled, our net revenues may decline.

Our Sales, Gross Margins, And Market Share May Be Reduced Because of Increased Competition. Competition in optical markets in which we compete is intense. Many of our competitors are large public and private companies that have longer operating histories and significantly greater financial, technical, marketing and other resources than we have. As a result, these competitors are able to devote greater resources than we can to the development, promotion, sale and support of their products. In addition, the market capitalization and cash reserves of several of our competitors are much larger than ours, and, as a result, these competitors are much better positioned than we are to acquire other companies in order to gain new technologies or products that may displace our product lines. Such acquisitions could give our competitors further advantages. For example, if our competitors acquire any of our significant

- 12 -

customers, these customers may reduce the amount of products they purchase from us. Alternatively, some of our competitors may spin-out new companies in the optical component and module market. These companies may compete more aggressively than their former parent companies due to their greater dependence on our markets. In addition, many of our potential competitors have significantly more established sales and customer support organizations, much greater name recognition, more extensive customer bases, more developed distribution channels and broader product offerings than we have. These companies can leverage their customer bases and broader product offerings and adopt aggressive pricing policies to gain market share. Additional competitors may enter the market, and we are likely to compete with new companies in the future. We expect to encounter potential customers that, due to existing relationships with our competitors, are committed to the products offered by these competitors. As a result of the foregoing factors, we expect that competitive pressures may result in price reductions, reduced margins and loss of market share.

We compete with manufacturers of conventional spherical lens products and aspherical lens products, producers of optical quality glass and other developers of gradient lens technology as well as telecom product manufacturers. In both the optical lens and communications markets, we are competing against, among others, established international companies, especially in Asia. Many of these companies also are primary customers for optical and communication components, and therefore have significant control over certain markets for our products. We are also aware of other companies that are attempting to develop radial gradient lens technology. There may also be others of which we are not aware that are attempting to develop axial gradient lens technology similar to our technology. There can be no assurance that existing or new competitors will not develop technologies that are superior to or more commercially acceptable than our existing and planned technologies and products.

To maintain or improve our gross margins, we must continue to reduce the manufacturing cost of our products. We continue to take actions that are projected to reduce our material costs by obtaining additional sources for raw materials, reducing the labor costs of our production operations by establishing manufacturing capabilities in low cost regions and reducing our overhead expenses through process improvements and competitive sourcing. We believe these actions will allow us to make continued improvements in our profitability and cash requirements.

We Anticipate Further Reductions in the Average Selling Prices Of Our Products and Therefore Must Increase Our Sales Volumes, Reduce Our Costs and/or Introduce Higher Margin Products To Reach And Maintain Financial Stability. We have experienced decreases in the average selling prices of some of our products over the last four years, including most of our passive component products. We anticipate that as products in the optical component and module market become more commodity-like, the average selling prices of our products will decrease in response to competitive pricing pressures, new product introductions by us, our competitors or other factors. If we are unable to offset this anticipated decrease in our average selling prices by increasing our sales volumes or product mix, our net revenues and gross margins will decline, increasing the projected cash needed to fund operations. To address these competitive pressures, we must develop and introduce new products and product enhancements with higher margins. If we cannot maintain or improve our gross margins, our financial position may be harmed and our stock price may decline.

Because Of Our Limited Product Offerings, Our Ability To Generate Additional Revenues May Be Adversely Affected. We derive a substantial portion of our net revenues from a limited number of products. We expect that net revenues from a limited number of products will continue to account for a substantial portion of our total net revenues. Demand for these and other optical market products had declined materially in recent years; however, demand has improved since late fiscal 2003. Continued and expanding market acceptance of these products is critical to our future success. We cannot assure you that, once the communication industry and general economic conditions improve, our current or new products will achieve market acceptance at the rate at which we expect, or at all, which could adversely affect our results of operations.

If We Do Not Expand Our Sales and Marketing Organization, Our Revenues May Not Increase. The sale of our products requires long and involved efforts targeted at several key departments within our prospective customers’ organizations. Sales of our products require the prolonged efforts of sales, and sometimes executive, personnel, as well as specialized systems and applications engineers working together. Currently, our sales and marketing organization is somewhat limited. We believe we will need to increase our sales force in order to increase market awareness and sales of our products. Competition for qualified individuals remains, and we might not be able to hire the kind and number of sales and marketing personnel and applications engineers we need. If we are unable to expand our sales operations, we may not be able to increase market awareness or sales of our products, which would prevent us from increasing our revenues.

If We Are Unable To Make Sales In A Fragmented Market Our Revenues May Not Increase. The markets for optical lenses and laser components are highly fragmented. Consequently, we will need to identify and successfully target particular market segments in which we believe we will have the most success. These efforts will require a substantial, but unknown, amount of effort and resources. The fragmented nature of the optical products market may impede our ability to achieve commercial acceptance for our products. In addition, our success will depend in great part on our ability to develop and implement a successful marketing and sales program. There can be no assurance that any marketing and sales efforts undertaken by us will be successful or will result in any significant product sales.

- 13 -

Our Products Have Long And Variable Sales Cycles Which Reduce Our Ability To Accurately Forecast Revenues. The timing of our revenue is difficult to predict because of the length and variability of the sales and implementation cycles for our products. We do not recognize revenue until a product has been shipped to a customer, all significant vendor obligations have been performed and collection is considered probable. Customers may view the purchase of our products as a significant and strategic decision. As a result, customers typically expend significant effort in evaluating, testing and qualifying our products and our manufacturing process. This customer evaluation and qualification process frequently results in a lengthy initial sales cycle (often up to one year). While our customers are evaluating our products and before they place an order with us, we may incur substantial sales, marketing and product development expenses to customize our products to the customer’s needs. We may also expend significant management efforts, increase manufacturing capacity and order long lead-time components or materials prior to receiving an order. Even after this evaluation process, a potential customer may not purchase our products. Because of the evolving nature of the optical markets, we cannot predict the length of these sales and development cycles. These long sales cycles may cause our revenues and operating results to vary significantly and unexpectedly from quarter to quarter, which could continue to cause volatility in our stock price.

Current And Pending Litigation May Adversely Impact Operating Results. On May 2, 2000, we commenced a class action lawsuit in the Chancery Court of Delaware, New Castle County (the “Delaware Action”). In that action, we sought a declaratory judgment with respect to (i) our right to redeem our Class E common stock on March 31, 2001 for $.0001 per share, (ii) the right of the holders of Class E common stock to vote at the Annual Meeting to be held on October 6, 2000, and (iii) for certification of the holders of Class E common stock as a class and the named defendants as its representatives. The Delaware Action was settled in fiscal 2002 with the final settlement agreement requiring us to pay $0.40 per share to each Class E holder. The settlement agreement permitted Class E shareholders to elect not to participate in the settlement and thus was not binding on any Class E shareholders who so elected. Approximately 12% of the former Class E shareholders elected not to participate in the settlement (see Texas Action described below). Since the beginning of fiscal 2003, we have distributed approximately $1.4 million of the $1.5 million estimated total cost arising under the settlement agreement.

On or about June 9, 2000, a small group of holders of Class E common stock commenced an action against the company in a state court in Texas (the “Texas Action”). Plaintiffs in the Texas Action made various allegations regarding the circumstances surrounding the issuance of the Class E Common Stock and sought damages based upon those allegations. Management believes the allegations underlying the Texas Action are without merit. During the first quarter of fiscal 2003, the Texas court granted our motion for Summary Judgment. The plaintiffs sought reconsideration of the ruling, however, on October 24, 2002, the Texas court denied their motion. On February 14, 2003, the Plaintiffs requested that the Texas Supreme Court review the appellate court’s decision. On June 26, 2003, the Texas Supreme Court dismissed the Plaintiffs’ petition for review for want of jurisdiction. We are unable to determine at present whether the Plaintiffs intend to further challenge or appeal the Texas Supreme Court’s denial of their petition for review. On July 22, 2002, we together with a director filed a motion for summary judgment as to all of the Plaintiff’s claims, which was granted on October 10, 2002, and has been made final by the trial court on March 1, 2004. On March 15, 2004, the Plaintiffs filed an amended notice of appeal of final judgment as to the Company and a co-defendant. On November 3, 2004, arguments were heard in the appellate court by a panel of judges. A ruling by the 14^th District Court of Appeals, as to whether to overturn the Summary Judgment and allow a new trial or to affirm that decision is under review.

We from time to time are involved in various legal actions arising in the normal course of business. Prior to the filing of this Report we were notified of employment practices claims from former employees. Currently, in conjunction with legal counsel, we are evaluating the effect if any on our financial position or results of operations.

We may from time to time become involved in other lawsuits and legal proceedings. Litigation is expensive and is subject to inherent uncertainties, and an adverse result in any such matters could adversely impact our operating results or financial condition. Additionally, any litigation to which we are subject could also require significant involvement of our senior management and may divert management’s attention from our business and operations.

Sales, Political, Currency And Other Risks Associated With Our International Sales And Supply Could Negatively Impact Our Business. For fiscal 2005, approximately 12% of our net revenues were from sales to international customers; and, in fiscal 2004, approximately 17% of our net revenues were from sales to international customers. Our international sales will be limited if we cannot establish and/or maintain relationships with international distributors, establish foreign operations, expand international sales, and develop relationships with international service providers. Additionally, our international sales may be adversely affected if international economies weaken. We are subject to risks including the following:

- 14 -

While we expect our international revenues to be denominated predominantly in U.S. dollars, in the future a portion of our international revenues and expenses may be denominated in foreign currencies. Accordingly, we could experience the risks of fluctuating currencies and corresponding exchange rates.

We also source certain raw materials from outside the United States. Some of those materials, priced in non-dollar currencies, have risen in price due to the recent decline of the U.S. dollar against non-dollar-pegged currencies, especially the Euro. This lowers our margins and reduces our ability to reach positive cash flow and profitability.

Our Business Has Been Subject To Fluctuations In Quarterly Results And Continued Fluctuations Could Negatively Impact Our Stock Price. The market price of our common stock could be subject to wide fluctuations in response to quarterly variations in operating results. Revenues and results of operations are difficult as yet to predict and may fluctuate substantially from quarter to quarter. For example, as a result of revenues associated with any of our key customers, any cancellation of orders from a key customer could result in significant fluctuations in quarterly results. Quarterly results have also been and may continue to be affected by asset write-downs associated with communications market weakness, our headquarters and plant consolidations and other matters, including negative cash flow.

We May Issue Additional Securities With Rights Superior To Those Of The Common Stock, Which Could Materially Limit The Ownership Rights Of Shareholders. We may offer additional debt or equity securities in private and/or public offerings in order to raise working capital or to refinance our debt. Our board of directors has the right to determine the terms and rights of any debt securities and preferred stock without obtaining the approval of the stockholders. It is possible that any debt securities or preferred stock that we sell would have terms and rights superior to those of the common stock and may be convertible into common stock. Any sale of securities could adversely affect the interests or voting rights of the holders of common stock, result in substantial dilution to existing stockholders, or adversely affect the market price of our common stock. We have no present plans to issue any convertible preferred stock or any other preferred stock.

Our Stock Price Has Been, And May Continue To Be, Subject To Large Price Swings, Which We Are Not Able To Control. Broad market fluctuations or fluctuations in our operations may adversely affect the market price of our common stock. The market for our Class A common stock is volatile, the bid-ask spread is often large and the trading volume and activity can be low and sporadic. The trading price of our common stock has been and will continue to be subject to:

- 15 -

Statements of or changes in opinions, ratings or earnings estimates made by brokerage firms or industry analysts relating to the markets in which we operate or expect to operate could have an adverse effect on the market price of our Common Stock. In addition, the stock market as a whole, as well as our particular market segment, have from time to time experienced extreme price and volume fluctuations which have particularly affected the market price for the securities of many companies and which often have appeared unrelated to the operating performance of these companies. Although our shares are publicly traded on Nasdaq, the trading market for our shares can be limited. During the fiscal year ended June 30, 2005, Nasdaq-reported trading volume for our shares averaged 5,910 shares per trading day. We cannot forecast or control any material increase in the trading volume for our shares. A lack of an active trading market for our shares could negatively impact stockholders’ ability to sell their shares when they desire and the price, which they could obtain.

The Fact That We Do Not Expect To Pay Dividends May Lead To A Decreased Price For Our Stock. Our board of directors has never declared a dividend on our Common Stock. We do not anticipate paying dividends on our Common Stock in the foreseeable future. Due to U.S. tax law changes in 2003, dividends may be more valuable on an after-tax basis as a component of investment return, potentially diminishing the appeal of holding our Common Stock. It is anticipated that our earnings, if any, will be reinvested in sales growth activities for our business.

Our Management And Principal Shareholders Control A Substantial Amount Of Our Stock And May, Therefore, Influence Our Affairs. If our management and a few principal shareholders act in concert, disposition of matters submitted to shareholders or the election of our entire board of directors may be hindered. We estimate that management, including directors, and our principal shareholders (shareholders owning more than 5% of our Common Stock) beneficially owned approximately 34% of the aggregate common stock outstanding as of June 30, 2005.

Our Charter Documents And Delaware Law May Inhibit A Takeover. In certain circumstances, the fact that corporate devices are in place that will inhibit or discourage takeover attempts could reduce the market value of our common stock. Our Certificate of Incorporation, Bylaws and certain other agreements contain certain provisions that may discourage other persons from attempting to acquire control of us. These provisions include, but are not limited to:

All of these provisions, as well as the provisions of Section 203 of the Delaware General Corporation Law (to which we are subject), could impede a merger, consolidation, takeover or other business combination involving us or discourage a potential acquirer from making a tender offer or otherwise attempting to obtain control of us.

Outstanding Warrants, Stock Options And Restricted Stock Agreements May Inhibit Our Ability To Accomplish Future Financings And Adversely Affect Our Stock Price. The existence of our outstanding warrants, options and restricted stock and the potential for sales of significant amounts of previously unregistered shares of our Common Stock in the public market, or the perception that such sales could occur, may adversely affect the terms on which we can obtain additional financing or the prevailing market price of our Common Stock. As of July 31, 2005, there were issued and outstanding:

- 16 -

In addition, 359,921 shares of our common stock were reserved as of July 31, 2005, for issuance pursuant to future grants to be made under our Amended and Restated Omnibus Incentive Plan.

For the life of such options and warrants, the holders will have the opportunity to profit from a rise in the price of the underlying common stock, with a resulting dilution in the interest of other holders of common stock upon exercise or conversion. Further, the option and warrant holders can be expected to exercise their options and warrants at a time when we would, in all likelihood, be able to obtain additional capital by an offering of our unissued common stock on terms more favorable than those originally provided by such options or warrants. Of the total number of shares of Common Stock currently issued and outstanding, there are likely a small number of unregistered shares outstanding, other than those held by the selling stockholders, and some of those shares may be freely traded or may be traded under certain volume and other restrictions set forth in Rule 144 promulgated under the Securities Act of 1933 (the “Securities Act”).

We Have Agreed To Certain Limitations Upon Potential Liability Of Our Directors, Which Could Prevent Recovery Of Monetary Damages. Our Certificate of Incorporation provides that directors will not be personally liable for monetary damages to the Company or its shareholders for a breach of fiduciary duty as a director, subject to limited exceptions. Although such limitation of liability does not affect the availability of equitable remedies such as injunctive relief or rescission, the presence of these provisions in our Certificate of Incorporation could prevent the recovery of monetary damages by the Company or its shareholders.

We May Have Difficulty Obtaining Director And Officer Liability Insurance In Acceptable Amounts For Acceptable Rates. We carry insurance protecting our officers and directors and us against claims relating to the conduct of our business (“D&O insurance”). D&O insurance covers the costs incurred by companies and their management to defend against and resolve claims relating to management conduct and results of operations, such as securities class action claims. These claims are extremely expensive to defend against and resolve. Therefore we purchase and maintain D&O insurance to cover some of these costs. We pay significant premiums to acquire and maintain D&O insurance, which is provided by third-party insurers, and we agree to underwrite a portion of such exposures under the terms of these insurance coverages. In recent years the premiums we have paid for D&O insurance had increased substantially. During fiscal 2005 we have been able to renew our D&O insurance for a reduction in premium over the prior year. We cannot assure that, in the future, we will be able to obtain what we adjudge to be sufficient director and officer liability insurance coverage at acceptable rates and with acceptable deductibles and other limitations. Further, due to our available financial resources at the time the current coverage expires (February 2006), we may be unable to pay for or we may choose not to seek as much coverage as we adjudge to be sufficient. Failure or inability to obtain such insurance, or the election to accept less than we adjudge sufficient or none at all, could materially harm our financial condition in the event that we are required to defend against and resolve any future securities class actions or other claims made against us or our management arising from the conduct of our operations. Further, obtaining such insurance in an inadequate amount or obtaining none at all may impair our future ability to retain and recruit qualified officers and directors.

Business Interruptions Could Adversely Affect Our Business. We manufacture all of our products at a single manufacturing facility in Orlando, Florida, and our revenues are dependent upon the continued operation of this facility. This facility is subject to a lease that expires in 2008 unless renewed pursuant to terms mutually agreeable to our landlord and us. Our operations are vulnerable to interruption by fire, hurricane winds and rain, electric power loss, telecommunications failure and other events beyond our control. We do not have a detailed disaster recovery plan, and we do not have a backup facility or contractual arrangements with any other manufacturers in the event of a casualty to or destruction of the facility or if the facility ceases to be available to us for any other reason. If we are required to rebuild or relocate our manufacturing facility, a substantial investment in improvements and equipment would be necessary. We carry only a limited amount of business interruption insurance, which may not sufficiently compensate us for losses that may occur. Our facilities may be subject to electrical blackouts as a consequence of a shortage of available electrical power. We currently do not have backup generators or alternate sources of power in the event of a blackout. If blackouts interrupt our power supply, we would be temporarily unable to continue operations at our facility. Any losses or damages incurred by us as a result of blackouts, rebuilding, relocation or other business interruptions, including the aforementioned, could result in a significant delay or reduction in manufacturing and production capabilities, impair our reputation, harm our ability to retain existing customers and to obtain new customers, and could result in reduced sales, lost revenue, and/or loss of market share, any of which could substantially harm our business and the results of operations.

- 17 -

As an example of this type of risk, the Company experienced an electric power outage at its facility caused by a storm named “Hurricane Charley” from the evening of August 13, 2004 to the morning of August 17, 2004. During this period, we were without the use of our production capacity and lost approximately six shifts of production.

Our Business Depends, In Part, Upon The Efforts Of Third Parties, Which We Can Not Control. Part of our strategy for the research, development and commercialization of certain products entails entering into various arrangements with corporate partners, OEMs, licensees and others in order to generate product sales, license fees, royalties and other funds adequate for product development or to enhance commercial prospects. We may also rely on our collaborative partners to conduct research efforts, product testing and to manufacture and market certain of our products. Although we believe that parties to any such arrangements would have an economic motivation to succeed in performing their contractual responsibilities, the amount and timing of resources to be devoted to these activities may not be within our control. There can also be no assurance that we will be successful in establishing any such collaborative arrangements or that, if established, the parties to such arrangements will assist us in commercializing products. We have a non-exclusive agreement with a catalog company to distribute certain of our products. We have agreements with nine foreign distributors to create markets for GRADIUM and our other products in their respective countries. There can be no assurance, however, that these parties, or any future partners, will perform their obligations as expected or that any revenue will be derived from such arrangements.

Future Acquisitions To Add To Our Product, Process Or Management Capabilities May Fail To Produce The Desired Benefits And Will Likely Be Dilutive To Existing Shareholders. We anticipate that in the future, as part of our business strategy, we may find strategic acquisitions of complementary companies, products or technologies to be desirable. In the event of any such future acquisitions, we could:

Any future acquisitions also could involve numerous risks, including:

We cannot assure that we will be able to successfully integrate any businesses, products, technologies or personnel that we might acquire in the future, which may harm our business.

The Loss Of, Or Our Inability To Hire, Key Personnel Would Reduce Our Ability To Manage Our Business Effectively. Our future success depends upon the continued services of our executive and non-executive officers and other key engineering, sales, marketing, manufacturing and support personnel. Our inability to retain or attract key employees could have a material adverse effect on our business and results of operations. Our operations depend, to a great extent, upon the efforts of our management. We also depend upon our ability to attract additional members to our operations teams to support our strategy. The loss of any of these key employees would adversely affect our business. We had 100 full-time equivalent employees on July 31, 2005. We have added 12 persons in fiscal 2005, and we expect to continue to hire selectively in the manufacturing, engineering, sales and marketing and administrative functions to the extent consistent with our business levels. Our ability to continue to attract and retain highly skilled personnel will be a critical factor in determining whether we will be successful. Competition for highly skilled personnel is intense. We may not be successful in attracting, assimilating or retaining qualified personnel to fulfill our current or future needs, which could adversely impact our ability to develop and sell our products.

- 18 -

We Rely On The Efforts Of Our Chief Executive Officer, And The Loss Of His Services Could Materially Adversely Affect Our Business. Our success will be largely dependent upon the personal efforts and abilities of Kenneth Brizel, our President and Chief Executive Officer. Mr. Brizel is not bound by an employment agreement. If Mr. Brizel ends his relationship with the company before a qualified replacement is found, then our business, prospects and results of operations could be materially adversely affected.

B. Risks Related To The Optical Networking Industry

Sales Of Some Of Our Products Depend Upon Use Of Optical Networks To Satisfy Increased Bandwidth Requirements. The future success of this market depends on the continuing increase in the amount of data transmitted over communications networks, or bandwidth, and the growth of optical networks to meet the increased demand for bandwidth. If the internet does not continue to expand as a widespread communications medium and commercial marketplace, the need for significantly increased bandwidth across networks and the market for optical networking products may not continue to develop. Future demand for our products is uncertain and will depend to some degree on the continued growth and upgrading of optical networks. If the growth and upgrading of optical networks does not continue, sales of some of our products may decline, which would adversely affect our revenues.

The Optical Networking Market Is New And Unpredictable And Characterized By Rapid Technological Changes And Evolving Standards. The optical networking market is relatively new and is characterized by rapid technological change, frequent new product introductions, changes in customer requirements and evolving industry standards. Because this market is relatively new, it is difficult to predict its potential size or future growth rate. It has already gone through a virulent decline. Widespread adoption of optical networks would be helpful to our future success. Potential end-user customers who have invested substantial resources in their existing copper lines or other systems may be reluctant or slow to adopt a new approach, like optical networks. Our success in generating revenues in this emerging market will depend on, among other things:

If we are unable to do any of the foregoing, or if we fail to address changing market conditions, the sales of our products may decline, which would adversely impact our revenues.

We Anticipate Further Reductions In The Average Selling Prices Of Our Products And Therefore Must Increase Our Sales Volumes, Reduce Our Costs And/Or Introduce Higher Margin Products To Reach And Maintain Financial Stability. We have experienced decreases in the average selling prices of some of our products, including most of our passive component products, which has offset inflationary effects. Over 98 percent of our revenue increases have been attributed to volume increases. We anticipate that as products in the optical component and module market become more commodity-like, the average selling prices of our products will decrease further in response to competitive pricing pressures, new product introductions by us, our competitors or other factors. The optical component and module market is experiencing extreme volatility as a result of lower product demand than existed in 2000, which will make it more difficult for us to increase our sales volume. If we are unable to offset this anticipated decrease in our average selling prices by increasing our sales volumes or improving our product mix, our net revenues and gross margins will decline. In addition, to maintain or improve our gross margins, we must continue to reduce the manufacturing cost of our products, and we must develop and introduce new products and product enhancements with higher margins. If we cannot maintain or improve our gross margins, our financial position may be harmed and our stock price may decline.

C. Risks Related To Manufacturing Our Products

If We Do Not Accurately Project Demand For Our Products, We Will Have Excess Manufacturing Capacity Or Insufficient Manufacturing Capacity Which Can Adversely Affect Our Financial Results. We currently manufacture all of our products in our facility located in Orlando, Florida. Based on uncertainty in global economic conditions and particularly in our telecommunication market based products, we believe lower demand for various products will continue through fiscal 2006. We intend to operate at a “right-sized” production level during fiscal 2006 while retaining flexibility to meet demand if it should increase in the near future. We will accomplish this, in part, by maintaining some of our production workforce as temporary employees or contractors.

Our Failure To Accurately Forecast Material Requirements Could Cause Us To Incur Additional Costs, Have Excess Inventories Or Have Insufficient Materials To Build Our Products. We primarily use forecasts based on actual or anticipated product orders to determine our materials requirements. It is very important that we accurately predict both the demand for our products and the lead times required to obtain the necessary materials. Lead times for materials that we order vary significantly and depend on factors such as specific supplier requirements, the size of the order, contract terms and current market demand for the materials at a given time. If we overestimate our material requirements, we may have excess inventory, which would increase our costs. If we underestimate our material requirements, we may have inadequate inventory, which could interrupt our manufacturing and delay

- 19 -

delivery of our products to our customers. Any of these occurrences would negatively impact our results of operations. Additionally, in order to avoid excess material inventories we may incur cancellation charges associated with modifying existing purchase orders with our vendors.

If We Do Not Achieve Acceptable Manufacturing Yields Or Sufficient Product Reliability, Our Ability To Ship Products To Our Customers Could Be Delayed. The manufacture of our products involves complex and precise processes. Our manufacturing costs for several products are relatively fixed, and, thus, manufacturing yields are critical to our results of operations. Changes in our manufacturing processes or those of our suppliers, or the use of defective materials, could significantly reduce our manufacturing yields and product reliability. In addition, we may experience manufacturing delays and reduced manufacturing yields upon introducing new products to our manufacturing lines. We may experience lower than targeted product yields in the future which could adversely affect our operating results.

If Our Customers Do Not Qualify Our Manufacturing Lines For Volume Shipments, Our Operating Results Could Suffer. Generally, customers do not purchase our products, other than limited numbers of evaluation units, prior to qualification of the manufacturing line for volume production. Our existing manufacturing lines, as well as each new manufacturing line, must pass through varying levels of qualification with our customers. Customers may require that we be registered under international quality standards, such as ISO 9001. This customer qualification process determines whether our manufacturing lines meet the customers’ quality, performance and reliability standards. If there are delays in qualification of our products, our customers may drop the product from a long-term supply program, which would result in significant lost revenue opportunity over the term of that program.

We Depend On Single Or Limited Source Suppliers For Some Of The Key Materials Or Process Steps In Our Products, Which Makes Us Susceptible To Supply Shortages, Poor Performance Or Price Fluctuations. We currently purchase several key materials or have outside vendors perform process steps, such as lens coatings, used in or during the manufacture of our products from single or limited source suppliers. We may fail to obtain required materials or services in a timely manner in the future, or could experience further delays from evaluating and testing the products or services of these potential alternative suppliers. The decline in demand in the telecommunications equipment industry may have adversely impacted the financial condition of certain of our suppliers, some of whom have limited financial resources. We have in the past, and may in the future, be required to provide advance payments in order to secure key materials from financially limited suppliers. Financial or other difficulties faced by these suppliers could limit the availability of key components or materials. Additionally, financial difficulties could impair our ability to recover advances made to these suppliers. Any interruption or delay in the supply of any of these materials or services, or the inability to obtain these materials or services from alternate sources at acceptable prices and within a reasonable amount of time, would impair our ability to meet scheduled product deliveries to our customers and could cause customers to cancel orders, negatively affecting our business.

Our Products May Contain Unknown Defects Which Would Adversely Affect Our Business. Some of our products are designed to be deployed in large and complex optical networks. Because of the nature of these products, they can only be fully tested for reliability when deployed in networks for long periods of time. Our fiber optic products may contain undetected defects when first introduced or as new versions are released, and our customers may discover defects in our products only after they have been fully deployed and operated under peak stress conditions. In addition, our products often are combined with products from other vendors. As a result, should problems occur, it may be difficult to identify the source of the problem. If we are unable to fix defects or other problems, we could experience, among other things:

The occurrence of any one or more of the foregoing factors could cause our net revenues to decline or otherwise have an adverse effect on our business.

We Face Product Liability Risks Which Could Adversely Affect Our Business. The sale of our optical products involves the inherent risk of product liability claims by others. We do not currently maintain product liability insurance coverage. Product liability insurance is expensive, subject to various coverage exclusions and may not be obtainable on terms acceptable to us if we decide to procure such insurance in the future. Moreover, the amount and scope of any coverage may be inadequate to protect us in the event that a product liability claim is successfully asserted. Should any such claim be asserted and successfully litigated by an adverse party, there could be a material adverse effect to our financial position and results of operations.

- 20 -

D. Risks Related To Our Intellectual Property

If We Are Unable To Protect And Enforce Our Intellectual Property Rights, We May Be Unable To Compete Effectively. We believe that our patents and other intellectual property rights are important to our success and our competitive position, and we rely on a combination of patent, copyright, trademark and trade secret laws and restrictions on disclosure to protect our intellectual property rights. Although we have devoted substantial resources to the establishment and protection of our intellectual property rights, the actions taken by us may be inadequate to prevent imitation or improper use of our products by others or to prevent others from claiming violations of their intellectual property rights by us.

In addition, we cannot assure that our patent applications will be approved, that any patents that we may be issued will protect our intellectual property or that third parties will not challenge any issued patents. Other parties may independently develop similar or competing technology or design around any patents that may be issued to us. We also rely on confidentiality procedures and contractual provisions with our employees, consultants and corporate partners to protect our proprietary rights, but we cannot assure the compliance by such parties with their confidentiality obligations, which could be very time consuming and expensive to enforce.

It may be necessary to litigate to enforce our patents, copyrights, and other intellectual property rights, to protect our trade secrets, to determine the validity of and scope of the proprietary rights of others or to defend against claims of infringement or invalidity. Such litigation can be time consuming, distracting to management, expensive and difficult to predict. Our failure to protect or enforce our intellectual property could have an adverse effect on our business, financial condition, prospects and results of operation.

We Do Not Have Patent Protection For Our Formulas And Processes, And A Loss Of Ownership Of Any Of Our Formulas And Processes Would Negatively Impact Our Business. We believe that we own our formulas and processes. However, we have not sought, and do not intend to seek, patent protection for all of our formulas and processes. Instead, we rely on the complexity of our formulas and processes, trade secrecy laws, and employee confidentiality agreements. However, we cannot assure you that other companies will not acquire our confidential information or trade secrets or will not independently develop equivalent or superior products or technology and obtain patent or similar rights. Although we believe that our formulas and processes have been independently developed and do not infringe the patents or rights of others, a variety of components of our processes could infringe existing or future patents, in which event we may be required to modify our processes or obtain a license. We cannot assure you that we will be able to do so in a timely manner or upon acceptable terms and conditions and the failure to do either of the foregoing would negatively affect our business, results of operations, financial condition and cash flows.

We May Become Involved In Intellectual Property Disputes And Litigation Which Could Adversely Affect Our Business. We anticipate based on the size and sophistication of our competitors and the history of rapid technological advances in our industry, that several competitors may have patent applications in progress in the United States or in foreign countries that, if issued, could relate to products similar to ours. If such patents were to be issued, the patent holders or licensees may assert infringement claims against us or claim that we have violated other intellectual property rights. These claims and any resulting lawsuits, if successful, could subject us to significant liability for damages and invalidate our proprietary rights. The lawsuits, regardless of their merits, could be time-consuming and expensive to resolve and would divert management time and attention. Any potential intellectual property litigation could also force us to do one or more of the following, any of which could harm our business:

Necessary Licenses Of Third-Party Technology May Not Be Available To Us Or May Be Very Expensive. From time to time we may be required to license technology from third parties to develop new products or product enhancements. We can provide no assurance that third-party licenses will be available to us on commercially reasonable terms, or at all. The inability to obtain any third-party license required to develop new products and product enhancements could require us to obtain substitute technology of lower quality or performance standards or at greater cost, either of which could seriously harm our ability to manufacture and sell our products.

On February 11, 2004, the University of Florida Research Foundation, Inc. (“UF”) notified us that we were in default under the terms of the Amended and Restated License Agreement (“UF Agreement”) for failure to pay certain back royalties and in April 2004 notified us that they had terminated the UF Agreement. UF claims that we owe $83,000 in unpaid royalties. While we dispute the amount owed and have previously engaged in discussions with UF about the matter, we do not believe that the termination of the UF Agreement has materially adversely affected our business since the licensed technology had never generated annual sales in excess of 3% of our total revenues from a single customer who had previously notified us that they were ceasing purchase of the product. UF has not made any efforts since mid 2004 to collect the amounts UF claims are owed by the Company.

- 21 -

Item 2. Properties

The Company occupies a 41,000 square foot facility in Orlando, Florida. The Orlando facility includes a 9,000 square foot clean room and 8,000 square feet used for storage. Lease terms on the Florida facility call for monthly rental payments of approximately $70,000 until November 2008, which includes all charges, including common area maintenance, escalation, and certain pass-throughs of taxes and other operating costs. At June 30, 2005, all of the Company’s physical assets, employees and operations were conducted from this facility, except for territorial sales personnel who office from their homes for the Company to serve their geographical territories. The Company believes that this facility is suitable and adequate for its immediate business needs and for up to two additional years.

Item 3. Legal Proceedings

On May 2, 2000, the Company commenced a class action lawsuit in the Chancery Court of Delaware, New Castle County (the “Delaware Action”). In that action, the Company sought a declaratory judgment with respect to (i) the Company’s right to redeem its Class E common stock on March 31, 2001 for $.0001 per share, (ii) the right of the holders of Class E common stock to vote at the Annual Meeting to be held on October 6, 2000, and (iii) for certification of the holders of Class E common stock as a class and the named defendants as its representatives. The Delaware Action was settled in fiscal 2002 with the final settlement agreement requiring the Company to pay $0.40 per share to each Class E holder. The settlement agreement permitted Class E shareholders to elect not to participate in the settlement and thus was not binding on any Class E shareholders who so elected. Approximately 12% of the former Class E shareholders elected not to participate in the settlement (see Texas Action described below). Since the beginning of fiscal 2003, the Company distributed approximately $1.4 million of the $1.5 million estimated total cost arising under the settlement agreement.

On or about June 9, 2000, a small group of holders of Class E common stock commenced an action against the Company in a state court in Texas (the “Texas Action”). Plaintiffs in the Texas Action made various allegations regarding the circumstances surrounding the issuance of the Class E common stock and sought damages based upon those allegations. Management believes the allegations underlying the Texas Action are without merit. During the first quarter of fiscal 2003, the Texas court granted the Company’s motion for Summary Judgment. The plaintiffs sought reconsideration of the ruling, however, on October 24, 2002, the Texas court denied their motion. On February 14, 2003, the Plaintiffs requested that the Texas Supreme Court review the appellate court’s decision. On June 26, 2003, the Texas Supreme Court dismissed the Plaintiffs’ petition for review for want of jurisdiction. We are unable to determine at present whether the Plaintiffs intend to further challenge or appeal the Texas Supreme Court’s denial of their petition for review. On July 22, 2002, the Company and a director filed a motion for summary judgment as to all of the Plaintiff’s claims, which was granted on October 10, 2002, and has been made final by the trial court on March 1, 2004. On March 15, 2004, the Plaintiffs filed an amended notice of appeal of final judgment as to the Company and a co-defendant. On November 3, 2004, arguments were heard in the appellate court by a panel of judges. A ruling by the 14^th District Court of Appeals, as to whether to overturn the Summary Judgment and allow a new trial or to affirm that decision is under review.

The Company from time to time is involved in various legal actions arising in the normal course of business. Prior to the filing of this Report the Company was notified of employment practices claims from former employees. Currently, in conjunction with legal counsel, we are evaluating the effect if any on the Company’s financial position or results of operations.

The Company may from time to time become involved in other lawsuits and legal proceedings. Litigation is expensive and is subject to inherent uncertainties, and an adverse result in any such matters could adversely impact our operating results or financial condition. Additionally, any litigation to which we are subject could also require significant involvement of our senior management and may divert management’s attention from our business and operations.

Item 4. Submission of Matters to a Vote of Security Holders.

No matter was submitted during the fourth quarter of fiscal 2005 to a vote of security holders, through the solicitation of proxies or otherwise.

- 22 -

PART II

Item 5. Market for Registrant’s Common Equity and Related Stockholder Matters.

Our Class A common stock is traded on the Nasdaq SmallCap Market (“SCM”) under the symbol “LPTH”.

The following table sets forth the range of high and low bid prices for the Class A common stock for the periods indicated, as reported by Nasdaq from the appropriate market. The quotation information below reflects inter-dealer prices, without retail mark-up, mark-down or commission, and may not represent actual transactions.

As of July 31, 2005, we estimate there were approximately 330 holders of record and approximately 8,000 street name holders of the Class A common stock.

We have never declared or paid any cash dividends on our common stock and we do not intend to pay any cash dividends in the foreseeable future. We currently intend to retain all future earnings in order to finance the operation and expansion of our business. The payment of dividends, if any, in the future, is within the discretion of our board of directors and will depend on our earnings, capital requirements, financial conditions and other relevant factors.

Item 6. Selected Financial Data

The table below presents portions of our consolidated financial statements and is not complete. The selected financial data set forth below for the fiscal years ended June 30, 2001 through 2005 are derived from, and are qualified by reference to, our audited consolidated financial statements.

This information is only a summary and you should read it in conjunction with our historical consolidated financial statements and related notes to such financial statements and with “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” included elsewhere in this report. Historical results presented below are not necessarily indicative of the results to be expected for any future fiscal year.

- 23 -

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The Private Securities Litigation Reform Act of 1995 provides a safe harbor for forward-looking statements made by or on behalf of the Company. All statements in this “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and elsewhere in this report, other than statements of historical facts, which address activities, events or developments that we expect or anticipate will or may occur in the future, including such things as future capital expenditures, growth, product development, sales, business strategy and other similar matters are forward-looking statements. These forward-looking statements are based largely on our current expectations and assumptions and are subject to a number of risks and uncertainties, many of which are beyond our control. Actual results could differ materially from the forward-looking statements set forth herein as a result of a number of factors, including, but not limited to, our products current stage of development, the need for additional financing, competition in various aspects of its business and other risks described in this report and in our other reports on file with the Securities and Exchange Commission. In light of these risks and uncertainties, all of the forward-looking statements made herein are qualified by these cautionary statements and there can be no assurance that the actual results or developments anticipated by us will be realized. We undertake no obligation to update or revise any of the forward-looking statements contained in this report.

Liquidity and Capital Resources

History: From February 1996 (when our IPO occurred) to fiscal 2001, inclusive, we raised a net total of approximately $86 million from the issuance of common and preferred stocks, the sale of convertible debt and the exercise of options and warrants on our capital stock. We did not have any equity or debt financing transactions in fiscal 2003; however in fiscal 2005 and 2004 we raised approximately $1 million and $2 million, respectively, from the issuance of common stock.

Our optical product markets experienced a severe downturn beginning fiscal 2001, which continued into fiscal 2003 and resulted in a significant decline in the demand for our products over that period. Beginning in 2004 and continuing in fiscal 2005, we believe that some improvement occurred in demand for our products in several of our markets. Nevertheless, we did not reach a status of positive cash flow or profitability during this fiscal year. We have developed our operating plan for fiscal 2006 and believe we have has adequate financial resources for achievement of that plan. Nevertheless, we will be managing against that plan closely during the year and should the plan objectives not be met during the year, remedial actions will be initiated. Such necessary actions, in addition to cost controls and vigorous sales activities, may include exploring strategic options for the sale of the Company or of some of our product capabilities. It is also possible that we may be required to seek additional external financing in fiscal 2006, which may not be available on reasonable terms and could be highly dilutive to current shareholders. We have no firm commitments for any material future financing at this time and we have a cash balance of approximately $2.5 million at June 30, 2005. We may still seek external debt or equity financing if it can be obtained in an amount and on terms that are acceptable to us.

Cash flows: Cash used by operations during fiscal 2005 was approximately $1.1 million, a decrease of approximately $1.4 million from fiscal 2004. Throughout fiscal 2005, on a comparative basis to fiscal 2004, we reduced our cash expenditures through the reductions in insurance, professional services, and telecommunication costs. Cash use was also favorably affected in fiscal 2005 by an increase in gross margin resulting from the growth in year-to-year revenues.

While progress has been made to reduce operating cash outflow in fiscal 2005 and 2004, significant risk and uncertainty remains. Our cash provided by operations was less than $10,000 for the fourth quarter of fiscal 2005. The fiscal 2006 operating plan and related financial projections which we have developed anticipate continued sales growth and continuing margin improvements based on production efficiencies and reductions in product costs, offset by marginal increases in selling, administrative and new product development expenditures.

Factors which could adversely affect cash balances in future quarters include, but are not limited to, a decline in revenue or a lack of anticipated sales growth, increased material costs, increased labor costs, planned production efficiency improvements not being realized, increases in property, casualty, benefit and liability insurance premiums and increases in other discretionary spending, particularly sales and marketing related.

- 24 -

In the event that we find it necessary to raise additional funds to sustain operations and we are unable to do so, we may need to take such actions as additional restructuring of operations to reduce costs. Should that occur, the realizability of certain assets, especially inventory, property and equipment, intellectual property and other intangible assets may be such that significant adjustments to our consolidated financial statements would be required.

During fiscal 2005, we expended approximately $134,000 for capital equipment in comparison to $358,000 during fiscal 2004. The majority of the capital expenditures during fiscal 2005 were related to equipment used to enhance or expand our production capacity. Our operating plan for fiscal 2006 estimates expenditures at similar levels to enhance or expand our capacity, however, we may spend more or less depending on opportunities and circumstances.

Key Performance Indicators

How we operate

We have continuing sales of two basic types: occasional sales via ad-hoc purchase orders of mostly standard product configurations (our “turns” business) and the more challenging and potentially more rewarding business with characteristics of the semiconductor industry. In this latter type of business we work with a customer to help them determine optical specifications and even create certain optical designs for them, including complex multi-component designs that we call “engineered assemblies.” That is followed by “sampling” them small numbers of the product for their test and evaluation. Thereafter, should the customer conclude that our specification or design is the best solution to their product need, we negotiate and “win” a contract (sometimes called a “design win”) – whether of a “blanket purchase order” type or a supply agreement. The strategy is to create an annuity revenue stream that makes the best use of our production capacity as compared to the turns business, which is unpredictable and uneven. A key business objective is to convert as much of our business to the design win and annuity model as is possible. We have several challenges in doing so:

Despite these challenges to winning more “annuity” business, we nevertheless believe we can be successful in procuring this business because of our unique capabilities in optical design engineering that we make available on the merchant market, a market that we believe is underserved in this area of service offering. Additionally, we believe that we offer value to some customers as a source of supply in the United States should they be unwilling to commit all of their source of supply of a critical component to foreign merchant production sources. We also continue to have the proprietary GRADIUM lens glass technology to offer to certain laser markets.

Our key indicators

Usually on a weekly basis, management reviews a number of performance indicators. Some of these indicators are qualitative and others are quantitative. These indicators change from time to time as the opportunities and challenges in the business change. They are mostly non-financial indicators such as units of shippable output by major product line, production yield rates by major product line and the output and yield data from significant intermediary manufacturing processes that support the production of the finished shippable product. These indicators can be used to calculate such other related indicators as fully yielded unit production per-shift, which varies by the particular product and our state of automation in production of that product at any given time. Higher unit production per shift means lower unit cost and therefore improved margins or improved ability to compete where desirable for price sensitive customer applications. The data from these reports is used to determine tactical operating actions and changes. We believe that our non-financial production indicators, such as those noted, are proprietary information.

Financial indicators that are usually reviewed at the same time include the major elements of the micro-level business cycle:

These indicators are similarly used to determine tactical operating actions and changes and are discussed in more detail below.

Sales Backlog:

Going forward, sales growth has been and continues to be our best indicator of success. Our best view into the efficacy of our sales efforts is in our “order book.” Our order book equates to sales “backlog.” It has a quantitative and a qualitative aspect: quantitatively,

- 25 -

our backlog’s prospective dollar value and qualitatively, what percent of the backlog is scheduled by the customer for date-certain delivery. We define our “Disclosure Backlog” as that which is requested by the customer for delivery within one year and which is reasonably likely to remain in the backlog and be converted into revenues. This includes customer purchase orders and may include amounts under supply contracts if they meet the aforementioned criteria. Generally, higher backlog is better for the Company.

Disclosure backlog, as defined above, has been as follows in the immediately preceding six fiscal quarters:

We believe the downward trend in the Disclosure Backlog was principally caused by a fall off in telecommunications orders in the third and fourth quarter of fiscal year 2005. We believe the trend will be reversed as sales to customers in our other markets continue to grow.

Inventory levels:

We manage inventory levels to minimize investment in working capital but still have the flexibility to meet customer demand to a reasonable degree. While the mix of inventory is an important factor, including adequate safety stocks of long lead-time materials, an important aggregate measure of inventory in all phases of production is the quarter’s ending inventory expressed as a number of days worth of the quarter’s cost of sales, also known as “days cost of sales in inventory,” or “DCSI.” It is calculated by dividing the quarter’s ending inventory by the quarter’s cost of goods sold, multiplied by 365 and divided by 4. Generally, a lower DCSI measure equates to a lesser investment in inventory and therefore more efficient use of capital. The table below shows our DCSI for the immediately preceding eight fiscal quarters:

Accounts receivable levels and quality:

Similarly, we manage accounts receivable levels to minimize investment in working capital. We measure the quality of receivables by the proportions of the total that are at various increments past due from our normally extended terms, which are generally 30 days. The most important aggregate measure of accounts receivable is the quarter’s ending balance of net accounts receivable expressed as a number of days worth of the quarter’s net revenues, also known as “days sales outstanding,” or “DSO.” It is calculated by dividing the quarter’s ending net accounts receivable by the quarter’s net revenues, multiplied by 365 and divided by 4. Generally, a lower DSO measure equates to a lesser investment in accounts receivable and therefore more efficient use of capital. The table below shows our DSO for the immediately preceding eight fiscal quarters:

- 26 -

The table below presents certain of our significant contractual obligations as of June 30, 2005. The operating leases relate to real estate and are commitments that are expensed as paid per the terms of the related contracts.

Contractual Obligations – Payments Due By Period

(dollars in 000’s)

Year ended June 30, 2005 compared to the year ended June 30, 2004

Consolidated Operations

Our consolidated revenues totaled $11.8 million for fiscal 2005, an increase of approximately $3.5 million or 41% compared to revenues for fiscal 2004 of $8.3 million. The increase was attributable to increases in all of our product categories with aspheric lenses and isolator products accounting for over 60% of the increase. While both represented increased total demand, the aspheric lens increases were from across several of the industries that we serve with that product line while the isolator increases were from a few customers, mostly in communications markets, specifically data communications. Our operating plan for fiscal 2006 projects continued revenue gains in aspheric lenses and collimators but anticipates a decline in isolator sales caused by decreased demand and price competition.

Fiscal 2005 consolidated cost of sales of $9.4 million was approximately 80% of net revenues of $11.8 million, which is an increase over fiscal 2004 when our cost of sales was approximately 75% of net revenues. This increase was caused by several factors. Among them, a one-time charge in rework and scrap in aspheric lenses, early stage production costs related to the introduction of new products and competitive pricing pressure in our isolator line. Going forward into fiscal 2006, the emphasis will be continued unit cost reductions driven by efficient purchasing and higher yields from statistical process control applications. Our operating plan projects higher gross margin levels in fiscal 2006 than we achieved in fiscal 2005.

Selling, general and administrative expenses decreased by approximately $1.0 million to $4.2 million in fiscal 2005 from $5.2 million in fiscal 2004. The decrease was primarily due to a $238,000 reduction in compensation related expenses and $223,000 reduction in depreciation expense. Other improvements were realized from cost savings such as a $122,000 decrease in insurance related expense, $100,000 decrease in rent, repairs and maintenance, and telephone expenses, $64,000 decrease in franchise and sales tax, and a $39,000 reduction in legal expenses in 2005 compared to 2004. Our operating plan for fiscal 2006 projects business levels that will require selling, general and administrative expenses to increase, primarily caused by selective hiring of additional employees and expected cost increases in certain items such as payroll and benefit related costs and commissions due to increased sales volume.

New product development costs were consistent with fiscal 2004 at approximately $1.0 million in fiscal 2005. This modest decrease was primarily due to reduced outside services and small tooling costs, partially offset by an increase in compensation related expenses. Our operating plan for fiscal 2006 projects some increases in new product development spending in order to support increased quote and customer design activity as well as continued investment in new product projects.

In fiscal 2005 our amortization of intangibles decreased by approximately $1.3 million to approximately $0.6 million from approximately $1.9 million in fiscal 2004. The most significant component of our identified intangibles subject to amortization relates to the developed technology (molded aspheric lenses) from our acquisition of Geltech in fiscal 2001. That asset was determined to have a four-year life at the time of the acquisition, which was accounted for by the purchase method. That amortization ended after the first quarter of fiscal 2005.

- 27 -

Other income and expenses decreased by approximately $0.5 million to less than $0.1 million of expenses from approximately $0.5 million of income in fiscal 2004. The most significant reason for the reduction is the one time legal settlement that occurred in fiscal 2004.

Net loss for fiscal 2005 was approximately $3.5 million compared with $5.6 million in fiscal 2004, an improvement of approximately $2.1 million. This $2.1 million improvement in the current year was comprised principally of:

Year ended June 30, 2004 compared to the year ended June 30, 2003

Consolidated Operations

Our consolidated revenues totaled $8.3 million for fiscal 2004, an increase of approximately 1.5 million or 22% compared to revenues for fiscal 2003 of $6.8 million. The increase was primarily attributable to increases in our aspheric lens and isolator products. While both represented increased total demand, the aspheric lens increases were from across several of the industries that we serve with that product line while the isolator increases were from just a few customers, mostly in communications markets, specifically data communications.

Fiscal 2004 consolidated cost of sales of $6.3 million was approximately 75% of net revenues of $8.3 million, which was a notable improvement over fiscal 2003 when our cost of sales was approximately 120% of net revenues. This improvement was caused by several factors. Primary among them was having the benefit of the fiscal 2003 consolidation in our manufacturing sites to enable us to operate without the overhead of severely underutilized facilities. Additionally, substantial work was accomplished to reduce materials costs and to rationalize the production lines when they were re-assembled in Orlando.

Selling, general and administrative expenses decreased by over $1.3 million to $5.2 million in fiscal 2004 from $6.5 million in fiscal 2003. The decrease was primarily due to lower headcount in these departments for parts of the year, some driven by the site consolidations and some by job consolidations in Orlando. Other improvements were realized from cost savings such as the reduction in our D&O insurance premium in 2004 over 2003.

New product development costs were reduced by $1.8 million to $1.0 million in fiscal 2004 from $2.8 million in fiscal 2003. Similar to SG&A costs, this decrease was primarily due to lower headcount in this department for part of the year driven by the site consolidations that occurred in 2003. Late in fiscal 2004 we increased headcount in new product development to support certain new product projects and to support customer requests for new or modified product designs as part of our sales and marketing process.

In fiscal 2004 our amortization of intangibles decreased by approximately $0.7 million to approximately $1.9 million from approximately $2.7 million in fiscal 2003. The most significant component of our identified intangibles subject to amortization relates to the developed technology (molded aspheric lenses) from our acquisition of Geltech in fiscal 2001.

Other income and expense for fiscal 2004 contained several items that are generally not expected to be recurring. We offered excess production equipment for sale throughout the fiscal year that was salvaged from our site consolidations in fiscal 2003 and we realized a gain of approximately $121,000 during fiscal year 2004 on proceeds of $137,000. Also, we settled litigation in the third quarter of fiscal 2004 for gross proceeds of $790,000 to us, which was offset by legal costs of $187,000, for a net gain of approximately $600,000. Our investment income in fiscal 2004 reached only $39,000 compared with over $400,000 in fiscal 2003 when available interest rates and our investable balances were higher. The primary remaining balance in other income and expense is the amortization of the fair value of a warrant issued to a related party in early fiscal 2004.

Net loss for fiscal 2004 was approximately $5.6 million compared with $21.2 million in fiscal 2003, an improvement of approximately $15.6 million. This $15.6 million improvement in the current year was comprised approximately of a gross margin improvement of $3.4 million, improved departmental operating costs of $3.1 million, reduced amortization of intangibles of $0.7 million, a lack of asset impairments compared with the prior year of $5.5 million, a reduction in reorganization and relocation expenses of $0.5 million, and a prior year change in accounting principle of $2.3 million.

- 28 -

Critical Accounting Policies

The preparation of our Consolidated Financial Statements in conformity with accounting principles generally accepted in the United States of America requires us to select appropriate company accounting policies, and to make judgments and estimates affecting the application of those accounting policies. In applying our accounting policies, different business conditions or the use of different assumptions may result in materially different amounts reported in our Consolidated Financial Statements.

In response to the Securities and Exchange Commission’s (“SEC”) Release No. 33-8040, “Cautionary Advice Regarding Disclosure About Critical Accounting Policies,” we have identified the most critical accounting principles upon which the Company’s financial statements depend. The critical principles were determined by considering accounting policies that involve the most complex or subjective decisions or assessments. The most critical accounting principles identified relate to: (i) revenue recognition; (ii) inventory valuation; (iii) long-lived assets; and (iv) intangible assets. These critical accounting policies and our other significant accounting policies are further disclosed in Note 2 to our Condensed Consolidated Financial Statements.

Revenue recognition. We recognize revenue upon shipment of the product provided that persuasive evidence of a final agreement exists, title has transferred, the selling price is fixed and determinable, and collectibility is reasonably assured.

Inventory valuation. We regularly assess the valuation of inventories and write down those inventories that are obsolete or in excess of forecasted usage to estimated net realizable value. Estimates of realizable value are based upon the our analyses and assumptions, including, but not limited to, forecasted sales levels by product, expected product lifecycle, product development plans and future demand requirements. If market conditions are less favorable than our forecast or actual demand from customers is lower than our estimates, we may be required to record additional inventory write-downs. If demand is higher than expected, we may be able to use or sell inventories that have previously been written down.

Long-Lived Assets. We evaluate the carrying value of long-lived assets, including property and equipment, whenever certain events or changes in circumstances indicate that the carrying amount may not be recoverable. Such events or circumstances include, but are not limited to, a prolonged industry downturn, a significant decline in our market value, or significant reductions in projected future cash flows. If facts and circumstances warrant such a review, a long-lived asset would be impaired if future undiscounted cash flows, without consideration of interest, are insufficient to recover the carrying amount of the long-lived asset. Once deemed impaired, the long-lived asset is written down to its fair value which could be considerably less than the carrying amount or future undiscounted cash flows. The determination of future cash flows and, if required, fair value of a long-lived asset is, by its nature, a highly subjective judgment. Fair value is generally determined by calculating the discounted future cash flows using a discount rate based upon our weighted average cost of capital. Significant judgments and assumptions are required in the forecast of future operating results used in the preparation of the estimated future cash flows, including long-term forecasts of the amounts and timing of overall market growth and our percentage of that market, groupings of assets, discount rate and terminal growth rates. Changes in these estimates could have a material adverse effect on the assessment of long-lived assets, thereby requiring us to write down the assets.

Intangible Assets. We generally obtain intangible assets in connection with a business unit purchase (for example, in a business combination). The assignment of value to individual intangible assets generally requires the use of a specialist, such as an appraiser. The assumptions used in the appraisal process are forward-looking, and thus subject to significant judgment. Because individual intangible assets may be: (i) expensed immediately upon acquisition (for example, purchased in-process research and development assets); or (ii) amortized over their estimated useful life (for example, acquired technology), their assigned values could have a material affect on current and future period results of operations. Further, intangible assets are subject to the same judgments when evaluating for impairment as other long-lived assets.

Recent Accounting Pronouncements

In November 2004, the FASB issued SFAS 151, Inventory Costs – an amendment of ARB No. 43, Chapter 4. This statement amends the guidance in Accounting Research Bulletin (ARB) No. 43, Chapter 4, Inventory Pricing, to clarify the accounting for abnormal amounts of idle facility expense, freight, handling costs and wasted material (spoilage) and requires that those items be recognized as expenses regardless of whether they meet the criterion of “abnormal.” The statement also requires that allocation of fixed production overhead factors to the costs of conversion be based on the normal capacity of the production facilities. The provisions of this statement are effective for inventory costs incurred during fiscal years beginning after June 15, 2005 and are to be applied prospectively. We do not expect the adoption of SFAS 151 to have a material effect on our results of operations or financial position.

In December 2004, FASB issued SFAS No. 153, “Exchanges of Nonmonetary Assets.” This statement is effective for the fiscal years beginning after June 15, 2005. This statement addresses financial accounting and reporting obligations associated with the exchange of nonmonetary assets. The statement eliminates the exception to fair value for exchanges of similar productive assets issued in APB Opinion No. 29, “Accounting for Nonmonetary Transactions,” and replaces it with a general exception for exchange transactions that do not have commercial substance, that is, transactions that are not expected to result in significant changes in the cash flows of the reporting entity. The adoption of this statement is not expected to have a significant impact on our financial position or results of operations.

- 29 -

In May 2005, FASB issued SFAS No. 154, “Accounting Changes and Error Corrections,” a replacement of APB Opinion No. 20, “Accounting Changes”, and FASB Statement No. 3, “Reporting Accounting Changes in Interim Financial Statements.” This statement applies to all voluntary changes in accounting principle, and changes the requirements for accounting for and reporting of a change in accounting principle. This statement requires retrospective application to prior periods’ financial statements of a voluntary change in accounting principle unless it is impracticable. APB Opinion No. 20 previously required that most voluntary changes in accounting principle be recognized by including in net income of the period of the change the cumulative effect of changing to the new accounting principle. This statement is effective for accounting changes and corrections of errors made in fiscal years beginning after December 15, 2005. The adoption of this statement is not expected to have a significant impact on our financial position or results of operations.

In June 2005, FASB issued an Emerging Issues Task Force (“EITF”) Consensus in Issue No. 04-5, “Determining Whether a General Partner, or the General Partners as a Group, Controls a Limited Partnership or Similar Entity When the Limited Partners Have Certain Rights,” and an amendment to Issue No. 96-16, “Investor’s Accounting for an Investee When the Investor Has a Majority of the Voting Interest but the Minority Shareholders Have Certain Approval or Veto Rights”. The EITF consensus is limited to limited partnerships or similar entities that are not variable interest entities under FASB Interpretation No. 46R, “Consolidation of Variable Interest Entities”. The consensus states that the general partners in a limited partnership should determine whether they control a limited partnership based on certain criteria. The consensus provides a framework that makes it more difficult for a general partner to overcome the presumption that it controls the limited partnership, therefore making it more likely that the general partner would be required to consolidate the limited partnership. For existing limited partnership agreements that have not been modified, the guidance should be applied in financial statements issued for the first reporting period in fiscal years beginning after December 15, 2005. For all new limited partnerships formed and for existing limited partnerships for which the partnership agreements are modified, the guidance is effective after June 29, 2005. The adoption of this consensus is not expected to have a significant impact on our financial position or results of operations.

Item 7A. Quantitative and Qualitative Disclosures about Market Risk

We invest a portion of our cash reserves in a money market fund, which invests at least 80% of its net assets in securities issued by the U.S. Treasury and in related repurchase agreements. The money market fund is not protected under the FDIC; however, we have not experienced any losses in these funds. We do not believe that changes in market interest rates of up to 10 percent either up or down will have any material effect on our results of operations.

Item 8. Financial Statements and Supplementary Data

See index at page F-1 for the Financial Statements for each of the years in the three-year period ended June 30, 2005.

Supplementary Quarterly Financial Data (unaudited)

The following table summarizes unaudited, quarterly financial data for fiscal 2005 and fiscal 2004:

- 30 -

The following table summarizes unaudited, product line revenue data for fiscal 2005 and 2004:

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

There has been no change of accountants nor any disagreements with accountants on any matter of accounting principles or practices or financial statement disclosures required to be reported under this Item.

Item 9A. Controls and Procedures

Under the supervision and with the participation of our management, including our Chief Executive Officer and our Chief Financial Officer, we evaluated the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934 (the “Exchange Act”)) as of June 30, 2005, the end of the period covered by this report. Based on that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures were effective as of June 30, 2005.

During the fiscal quarter ended June 30, 2005, there was no change in our internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

PART III

Item 10. Directors and Executive Officers of the Registrant.

Except as disclosed under the item Business, “Executive Officers” in this report, the information required under this item will be set forth in our proxy statement to be filed with the Securities and Exchange Commission and is incorporated herein by reference.

Item 11. Executive Compensation.

The information required under this item will be set forth in our proxy statement to be filed with the Securities and Exchange Commission and is incorporated herein by reference.

Item 12. Security Ownership of Certain Beneficial Owners and Management.

The information required under this item will be set forth in our proxy statement to be filed with the Securities and Exchange Commission and is incorporated herein by reference.

Item 13. Certain Relationships and Related Transactions.

The information required under this item will be set forth in our proxy statement to be filed with the Securities and Exchange Commission and is incorporated herein by reference.

Item 14. Principal Accountant Fees and Services.

The information required under this item will be set forth in our proxy statement to be filed with the Securities and Exchange Commission and is incorporated herein by reference.

- 31 -

PART IV

Item 15. Exhibits, Financial Statement Schedules and Reports on Form 8-K.

(a) The following documents are filed as part of this report:

(1) Financial Statements – See Index on page F-1

Report of Independent Registered Public Accounting Firm

Consolidated Balance Sheets—As of June 30, 2005 and 2004

Consolidated Statements of Operations—For the years ended June 30, 2005, 2004 and 2003

Consolidated Statements of Stockholders’ Equity—For the years ended June 30, 2005, 2004 and 2003

Consolidated Statements of Cash Flows—For the years ended June 30, 2005, 2004 and 2003

Notes to Consolidated Financial Statements

(2) Exhibits

- 32 -

Notes:

- 33 -

L ightPath Technologies, Inc.

Index to Consolidated Financial Statements

F-1

Report of Independent Registered Public Accounting Firm

The Board of Directors

LightPath Technologies, Inc.:

We have audited the accompanying consolidated balance sheets of LightPath Technologies, Inc., and subsidiaries as of June 30, 2005 and 2004, and the related consolidated statements of operations, stockholders’ equity, and cash flows for each of the years in the three year period ended June 30, 2005. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of LightPath Technologies, Inc., and subsidiaries as of June 30, 2005 and 2004, and the results of their operations and their cash flows for each of the years in the three year period ended June 30, 2005 in conformity with U.S. generally accepted accounting principles.

As discussed in Note 2 to the Consolidated Financial Statements, the Company adopted the provisions of Statement of Financial Accounting Standards (SFAS) No. 142, Goodwill and Other Intangible Assets, and SFAS No. 144, Accounting for Impairment or Disposal of Long-Lived Assets on July 1, 2002.

/s/ KPMG LLP

Orlando, Florida

August 29, 2005

F-2

LightPath Technologies, Inc.

Consolidated Balance Sheets

See accompanying notes to consolidated financial statements.

F-3

LightPath Technologies, Inc.

Consolidated Statements of Operations

See accompanying notes to consolidated financial statements.

F-4

LightPath Technologies, Inc.

Consolidated Statements of Stockholders’ Equity