Annual Statements Open main menu

LIQUIDMETAL TECHNOLOGIES INC - Quarter Report: 2015 September (Form 10-Q)

lqmt20150930_10q.htm

UNITED STATES


SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

FORM 10-Q

 

 

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

 

 

For the quarterly period ended September 30, 2015

 

 

 

OR

 

 

 

 

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

 

 

For the transition period from          to         

 

Commission File No001-31332


LIQUIDMETAL TECHNOLOGIES, INC.

 (Exact name of Registrant as specified in its charter)

 

Delaware

 

33-0264467

(State or other jurisdiction of

 

(I.R.S. Employer

incorporation or organization)

 

Identification No.)

 

30452 Esperanza

Rancho Santa Margarita, CA 92688

(Address of principal executive offices, zip code)

 

Registrant’s telephone number, including area code: (949) 635-2100 


Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.         

Yes      No  

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such

files). 

Yes      No 

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer ☐

 

Accelerated filer 

 

Non-accelerated filer ☐

Smaller reporting company ☐

 

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). 

Yes       No  

 

The number of common shares outstanding as of November 6, 2015 was 477,149,485.

 

 

 
 

 

 

LIQUIDMETAL TECHNOLOGIES, INC.
FORM 10-Q
FOR THE QUARTER ENDED
September 30, 2015



FORWARD-LOOKING INFORMATION

 

This Quarterly Report on Form 10-Q of Liquidmetal Technologies, Inc. contains “forward-looking statements” that may state our management’s plans, future events, objectives, current expectations, estimates, forecasts, assumptions or projections about the company and its business. Any statement in this report that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as “believes,” “estimates,” “projects,” “expects,” “intends,” “may,” “anticipates,” “plans,” “seeks,” and similar words or expressions identify forward-looking statements. Forward-looking statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results. These statements are not guarantees of future performance, and undue reliance should not be placed on these statements. It is important to note that our actual results could differ materially from what is expressed in our forward-looking statements due to the risk factors described in the section of our Annual Report on Form 10-K for the year ended December 31, 2014 entitled “Risk Factors,” as well as the following risks and uncertainties:

 

 

Our ability to fund our operations in the long-term through financing transactions on terms acceptable to us, or at all;

 

Our history of operating losses and the uncertainty surrounding our ability to achieve or sustain profitability;

 

Our limited history of developing and selling products made from our bulk amorphous alloys;

 

Our limited history of licensing our technology to third parties;

 

Lengthy customer adoption cycles and unpredictable customer adoption practices;

 

Our ability to identify, develop, and commercialize new product applications for our technology;

 

Competition from current suppliers of incumbent materials or producers of competing products;

 

Our ability to identify, consummate, and/or integrate strategic partnerships;

 

The potential for manufacturing problems or delays; and

 

Potential difficulties associated with protecting or expanding our intellectual property position.

 

We undertake no obligation, other than as required by applicable law, to update publicly any forward-looking statements, whether as a result of new information, future events or otherwise.

 

 

 
2

 

 

TABLE OF CONTENTS

 

       

PART I - Financial Information

 
       
 

Item 1 – Financial Statements

4

   

Consolidated Balance Sheets

 
   

Consolidated Statements of Operations and Comprehensive Loss

 
   

Consolidated Statement of Stockholders’ Equity

 
   

Consolidated Statements of Cash Flows

 
   

Notes to Consolidated Financial Statements

 
       
 

Item 2 – Management’s Discussion and Analysis of Financial Condition and Results of Operations

19

       
 

Item 3 – Quantitative and Qualitative Disclosures about Market Risk

24

       
 

Item 4 – Controls and Procedures

25

       

PART II – Other Information

       
 

Item 1 – Legal Proceedings

26

       
 

Item 1A – Risk Factors

26

       
 

Item 2 – Unregistered Sales of Equity Securities and Use of Proceeds

26

       
 

Item 3 – Defaults Upon Senior Securities

26

       
 

Item 4 – Mine Safety Disclosures

26

       
 

Item 5 – Other Information

26

       
 

Item 6 – Exhibits

27

       

Signatures

 

28

  

 
3

 

 

PART I

FINANCIAL INFORMATION

Item 1 – Financial Statements

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

($ in thousands, except par value and share data)

 

   

September 30,

   

December 31,

 
   

2015

   

2014

 
   

(Unaudited)

   

(Audited)

 

ASSETS

               
                 

Current assets:

               

Cash

  $ 4,384     $ 10,009  

Restricted cash

    2,006       -  

Trade accounts receivable, net of allowance for doubtful accounts

    20       83  

Inventory

    111       -  

Prepaid expenses and other current assets

    391       374  

Total current assets

  $ 6,912     $ 10,466  

Property and equipment, net

    1,468       1,118  

Patents and trademarks, net

    595       669  

Other assets

    31       31  

Total assets

  $ 9,006     $ 12,284  
                 

LIABILITIES AND STOCKHOLDERS' EQUITY

               
                 

Current liabilities:

               

Short-term debt

  $ 700     $ -  

Accounts payable

    193       155  

Accrued liabilities

    990       705  

Deferred revenue

    22       -  

Total current liabilities

  $ 1,905     $ 860  
                 

Long-term liabilities:

               

Warrant liabilities

    679       2,005  

Other long-term liabilities

    856       856  

Total liabilities

  $ 3,440     $ 3,721  
                 

Stockholders' equity:

               

Convertible, redeemable Preferred Stock, $0.001 par value; 10,000,000 shares authorized; 0 shares issued and outstanding at September 30, 2015 and December 31, 2014.

    -       -  

Common stock, $0.001 par value; 700,000,000 shares authorized; 477,149,485 and 464,482,819 shares issued and outstanding at September 30, 2015 and December 31, 2014, respectively.

    477       464  

Warrants

    18,179       18,179  

Additional paid-in capital

    203,395       200,610  

Accumulated deficit

    (216,425 )     (210,636 )

Non-controlling interest in subsidiary

    (60 )     (54 )
                 

Total stockholders' equity

    5,566       8,563  
                 

Total liabilities and stockholders' equity

  $ 9,006     $ 12,284  

 

The accompanying notes are an integral part of the consolidated financial statements.

 

 
4

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS and COMPREHENSIVE LOSS

($ in thousands, except share and per share data)

(unaudited)

 

   

For the Three Months

Ended September 30,

   

For the Nine Months

Ended September 30,

 
   

2015

   

2014

   

2015

   

2014

 
                                 

Revenue

                               

Products

  $ 42     $ 97     $ 80     $ 374  

Licensing and royalties

    -       -       27       36  

Total revenue

    42       97       107       410  
                                 

Cost of sales

    160       85       312       300  
                                 

Gross profit (loss)

    (118 )     12       (205 )     110  
                                 

Operating expenses

                               

Selling, marketing, general and administrative

    1,763       1,847       5,506       5,719  

Research and development

    491       498       1,428       1,224  

Total operating expenses

    2,254       2,345       6,934       6,943  

Operating loss

    (2,372 )     (2,333 )     (7,139 )     (6,833 )
                                 

Change in value of warrants, gain (loss)

    1,138       1,595       1,326       (276 )

Debt discount amortization expense

    -       (321 )     -       (373 )

Interest expense

    (1 )     -       (1 )     -  

Interest and other income

    5       41       19       43  
                                 

Net loss

    (1,230 )     (1,018 )     (5,795 )     (7,439 )
                                 

Net loss attributable to non-controlling interest

    2       2       6       10  

Net loss and comprehensive loss attributable to

                               

Liquidmetal Technologies' stockholders

  $ (1,228 )   $ (1,016 )   $ (5,789 )   $ (7,429 )
                                 
                                 

Net loss per common share attributable to Liquidmetal

                               

Technologies' stockholders, basic and diluted

  $ (0.00 )   $ (0.00 )   $ (0.01 )   $ (0.02 )
                                 

Number of weighted average shares- basic and diluted

    475,816,152       464,269,486       468,890,226       433,757,751  

 

The accompanying notes are an integral part of the consolidated financial statements.

 

 
5

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENT OF STOCKHOLDERS' EQUITY

For the Nine Months Ended September 30, 2015

($ in thousands, except share data)

(unaudited)

 

 

 

 

 

   

Preferred

Shares

   

Common

Shares

   

Common

Stock

   

Warrants part of Additional Paid-

in Capital

   

Additional

Paid-in

Capital

   

Accumulated

Deficit

   

Non-

Controlling

Interest

   

Total

 
                                                                 

Balance, December 31, 2014

    -       464,482,819     $ 464     $ 18,179     $ 200,610     $ (210,636 )   $ (54 )   $ 8,563  
                                                                 

Common stock issuance

            12,500,000       13               1,555                       1,568  

Stock option exercises

            166,666                       13                       13  

Stock-based compensation

                                    1,035                       1,035  

Restricted stock issued to officer

                                    182                       182  

Net loss

                                            (5,789 )     (6 )     (5,795 )
                                                                 
                                                                 

Balance, September 30, 2015

    -       477,149,485     $ 477     $ 18,179     $ 203,395     $ (216,425 )   $ (60 )   $ 5,566  

 

The accompanying notes are an integral part of the consolidated financial statements.

 

 
6

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

($ in thousands, except per share data)

(unaudited)

 

 

   

Nine Months Ended September 30,

 
   

2015

   

2014

 
                 

Operating activities:

               

Net loss

  $ (5,795 )   $ (7,439 )
                 

Adjustments to reconcile net loss to net cash used in operating activities:

               

Depreciation and amortization

    374       189  

Gain on sale of fixed asset

    -       (5 )

Bad debt expense

    19       -  

Stock-based compensation

    1,035       652  

Restricted stock compensation issued to officer

    182       234  

(Gain) loss from change in value of warrants

    (1,326 )     276  

Debt discount amortization

    -       373  
                 

Changes in operating assets and liabilities:

               

Trade accounts receivable

    44       152  

Inventory

    (111 )     -  

Prepaid expenses and other current assets

    (17 )     (9 )

Accounts payable and accrued liabilities

    323       (113 )

Deferred revenue

    22       60  

Net cash used in operating activities

    (5,250 )     (5,630 )
                 

Investing Activities:

               

Purchases of property and equipment

    (650 )     (957 )

Increase in restricted cash

    (2,006 )     -  

Proceeds from sale of fixed assets

    -       5  

Investment in patents and trademarks

    -       (9 )

Net cash used in investing activities

    (2,656 )     (961 )
                 

Financing Activities:

               

Proceeds from short-term debt

    700       -  

Proceeds from exercise of stock options

    13       205  

Proceeds from exercise of warrants

    -       226  

Proceeds from stock issuance

    1,568       16,000  

Net cash provided by financing activities

    2,281       16,431  
                 

Net (decrease) increase in cash

    (5,625 )     9,840  
                 

Cash at beginning of period

    10,009       2,062  

Cash at end of period

  $ 4,384     $ 11,902  

 

The accompanying notes are an integral part of the consolidated financial statements.

 

 
7

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine
Months Ended September 30, 2015 and 2014

(numbers in thousands, except share and per share data)

(unaudited)

 

1. Description of Business

 

Liquidmetal Technologies, Inc. (the “Company”) is a materials technology company that develops and commercializes products made from amorphous alloys. The Company’s family of alloys consists of a variety of bulk alloys and composites that utilize the advantages offered by amorphous alloys technology. The Company designs, develops and sells products and components from bulk amorphous alloys to customers in various industries. The Company also partners with third-party manufacturers and licensees to develop and commercialize Liquidmetal alloy products.

  

Amorphous alloys are, in general, unique materials that are distinguished by their ability to retain a random atomic structure when they solidify, in contrast to the crystalline atomic structure that forms in other metals and alloys when they solidify. Liquidmetal alloys are proprietary amorphous alloys that possess a combination of performance, processing, and potential cost advantages that the Company believes will make them preferable to other materials in a variety of applications. The amorphous atomic structure of bulk alloys enables them to overcome certain performance limitations caused by inherent weaknesses in crystalline atomic structures, thus facilitating performance and processing characteristics superior in many ways to those of their crystalline counterparts. For example, in laboratory testing, zirconium-titanium Liquidmetal alloys are approximately 250% stronger than commonly used titanium alloys such as Ti-6Al-4V, but they also have some of the beneficial processing characteristics more commonly associated with plastics. The Company believes these advantages could result in Liquidmetal alloys supplanting high-performance alloys, such as titanium and stainless steel, and other incumbent materials in a wide variety of applications. Moreover, the Company believes these advantages could enable the introduction of entirely new products and applications that are not possible or commercially viable with other materials.

 

The Company’s revenues can be derived from i) selling bulk Liquidmetal alloy products, which include non-consumer electronic devices, medical products, automotive components, and sports and leisure goods, ii) selling tooling and prototype parts such as demonstration parts and test samples for customers with products in development, iii) product licensing and royalty revenue, and iv) research and development revenue. The Company expects the overall mix of these sources of revenue to continue to change with the on-going development and commercialization of the Company’s technology.

  

2. Basis of Presentation and Recent Accounting Pronouncements

 

The accompanying unaudited interim consolidated financial statements as of and for the three and nine months ended September 30, 2015 and September 30, 2014 have been prepared in accordance with accounting principles generally accepted in the United States of America (“generally accepted accounting principles”) for interim financial information and in accordance with the instructions to Form 10-Q. Accordingly, they do not include all of the information and notes required by generally accepted accounting principles for complete financial statements. In the opinion of management, all adjustments (consisting only of normal recurring accruals) considered necessary for a fair presentation have been included. All intercompany balances and transactions have been eliminated in consolidation. Operating results for the three and nine months ended September 30, 2015 are not necessarily indicative of the results that may be expected for any future periods or the year ending December 31, 2015. The accompanying unaudited consolidated financial statements should be read in conjunction with the Company's 2014 Annual Report on Form 10-K filed with the Securities and Exchange Commission (“SEC”) on March 4, 2015.

 

Revenue Recognition

 

The Company’s revenue recognition policy complies with the requirements of ASC 605. Revenue is recognized when i) persuasive evidence of an arrangement exists, ii) delivery has occurred, iii) the sales price is fixed or determinable, iv) collection is probable and v) all obligations have been substantially performed pursuant to the terms of the arrangement. Revenues primarily consist of the sales and prototyping of Liquidmetal molds and bulk alloys, licensing and royalties for the use of the Liquidmetal brand and bulk Liquidmetal alloys. Revenue is deferred and included in liabilities when the Company receives cash in advance for goods not yet delivered or if the licensing term has not begun.

 

License revenue arrangements in general provide for the grant of certain intellectual property rights for patented technologies owned or controlled by the Company. These rights typically include the grant of an exclusive or non-exclusive right to manufacture and/or sell products covered by patented technologies owned or controlled by the Company. The intellectual property rights granted may be perpetual in nature, extending until the expiration of the related patents, or can be granted for a defined period of time.

 

Licensing revenues that are one time fees upon the granting of the license are recognized when i) the license term begins in a manner consistent with the nature of the transaction and the earnings process is complete, ii) when collectability is reasonably assured or upon receipt of an upfront fee, and iii) when all other revenue recognition criteria have been met. Pursuant to the terms of these agreements, the Company has no further obligation with respect to the grant of the license. Licensing revenues that are related to royalties are recognized as the royalties are earned over the related period.

 

 
8

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine
Months Ended September 30, 2015 and 2014

(numbers in thousands, except share and per share data)

(unaudited)

 

Fair Value Measurements

 

The estimated fair values of financial instruments reported in the consolidated financial statements have been determined using available market information and valuation methodologies, as applicable. The fair value of cash, trade receivables, restricted cash, accounts payable, and short-term debt approximate their carrying value due to their short maturities.

 

Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. Entities are required to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value based upon the following fair value hierarchy:

 

Level 1 —

Quoted prices in active markets for identical assets or liabilities;

 

Level 2 —

Observable inputs other than Level 1 prices, such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities; and

 

Level 3 —

Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.

 

The Company has one financial instrument, namely warrant liabilities that are recorded at fair value on a periodic basis using Level 2 measurement inputs. Warrants are evaluated under the hierarchy of FASB ASC Subtopic 480-10, FASB ASC Paragraph 815-25-1 and FASB ASC Subparagraph 815-10-15-74 addressing embedded derivatives. The fair value of such warrants is estimated using the Black-Scholes option pricing model. The foregoing warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815 (see Note 11).

 

As of September 30, 2015, the following table represents the Company’s fair value hierarchy for items that are required to be measured at fair value on a recurring basis:

 

   

Fair Value

   

Level 1

   

Level 2

   

Level 3

 
                                 

Warrant liabilities

    679       -       679       -  

 

 

As of December 31, 2014, the following table represents the Company’s fair value hierarchy for items that are required to be measured at fair value on a recurring basis:

 

   

Fair Value

   

Level 1

   

Level 2

   

Level 3

 
                                 

Warrant liabilities

    2,005       -       2,005       -  

 

 

 

Recent Accounting Pronouncements

 

Revenue from Contracts with Customers

 

In May 2014, the FASB issued an accounting standards update which modifies the requirements for identifying, allocating, and recognizing revenue related to the achievement of performance conditions under contracts with customers. This update also requires additional disclosure related to the nature, amount, timing, and uncertainty of revenue that is recognized under contracts with customers. This guidance is effective beginning January 1, 2018 and is required to be applied retrospectively to all revenue arrangements. The Company is currently assessing the effects this guidance may have on its consolidated financial statements.

 

Ability to Continue as a Going Concern

 

In August 2014, the FASB issued an accounting standards update which requires an assessment of an entity’s ability to continue as a going concern by incorporating and expanding upon certain principles that are currently addressed by U.S. auditing standards. This standard is effective for the fiscal years ending after December 15, 2016, and for annual periods and interim periods thereafter. The Company is currently evaluating the new guidance to determine the impact it will have on its consolidated financial statements.

 

 
9

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine
Months Ended September 30, 2015 and 2014

(numbers in thousands, except share and per share data)

(unaudited)

 

Inventory

 

In July 2015, the FASB issued an accounting standards update which modifies the requirements for measuring the value of inventory on a periodic basis. The new requirement will be to measure inventory at the lower of cost or net realizable value. This standard is effective for the fiscal years ending after December 15, 2016, and for annual periods and interim periods thereafter. The adoption of this guidance is not expected to have a significant impact on the Company’s consolidated financial statements.

 

Other recent accounting pronouncements issued by the FASB (including its Emerging Issues Task Force), the AICPA and the SEC did not or are not believed by management to have a material impact on the Company's present or future consolidated financial statements.

 

3. Significant Transactions

 

2014 Stock Purchase Agreement

 

On August 20, 2014, the Company entered into a common stock purchase agreement (“2014 Purchase Agreement”) with Aspire Capital Fund LLC (“Aspire Capital”), which provides that, upon the terms and subject to the conditions and limitations set forth therein, Aspire Capital is committed to purchase up to an aggregate of $30,000 worth of the Company’s common stock, $0.001 par value, over the 36-month term of the 2014 Purchase Agreement.

 

From time to time over the term of the 2014 Purchase Agreement, the Company may, at its sole discretion, provide Aspire Capital with a regular purchase notice (each a “Regular Purchase Notice”) directing Aspire Capital to purchase up to 1,000,000 shares, but not to exceed $400, of the Company’s common stock per trading day at a price per share equal to the lesser of (i) the lowest sale price of the Company’s common stock on the purchase date; or (ii) the arithmetic average of the three lowest closing sale prices for the Company’s common stock during the twelve consecutive trading days ending on the trading day immediately preceding the purchase date.

 

In addition, on any date on which the Company submits a Regular Purchase Notice to Aspire Capital for the purchase of at least 500,000 shares at a price above $0.30 per share, the Company also has the right, in its sole discretion, to present Aspire Capital with a volume-weighted average price purchase notice (each, a “VWAP Purchase Notice”) directing Aspire Capital to purchase an amount of stock equal to up to 30% of the aggregate shares of the Company’s common stock traded on its principal market on the next trading day (the “VWAP Purchase Date”), subject to a maximum number of shares the Company may determine. The purchase price per share pursuant to such VWAP Purchase Notice is generally 95% of the volume-weighted average price for the Company’s common stock traded on its principal market on the VWAP Purchase Date.

 

The Company may deliver multiple Regular Purchase Notices and VWAP Purchase Notices to Aspire Capital from time to time during the term of the 2014 Purchase Agreement, so long as the most recent purchase has been completed. The 2014 Purchase Agreement provides that the Company and Aspire Capital shall not effect any sales under the 2014 Purchase Agreement on any purchase date where the closing sale price of the Company’s common stock is less than $0.10 per share. There are no trading volume requirements or restrictions under the 2014 Purchase Agreement, and the Company will control the timing and amount of sales of the Company’s common stock to Aspire Capital.

 

On September 9, 2014, an initial registration statement covering 75,000,000 shares issued and issuable pursuant to the 2014 Purchase Agreement was declared effective by the SEC. As of September 30, 2015, the Company had received an aggregate of $1,568 under the 2014 Purchase Agreement through the issuance of 12,500,000 shares of its common stock at a weighted average price of $0.13 per share.

 

Line of Credit Facility

 

In February 2015, the Company entered into a $2,000 line of credit facility, with a fixed interest rate of 2.1%, which expires on February 13, 2016, subject to annual renewals and potential changes in collateral requirements. Amounts available under this facility are secured by cash collateral. Such collateral is included as restricted cash on the Company’s consolidated balance sheet. As of September 30, 2015, there was $700 in outstanding borrowings under this facility. Interest expense applicable to these borrowings was $1 for both the three and nine month periods ended September 30, 2015.

 

2013 Stock Purchase Agreement

 

On November 8, 2013, the Company entered into a Common Stock Purchase Agreement (the “2013 Purchase Agreement”) with Kingsbrook Opportunities Master Fund LP, Tech Opportunities LLC, and Iroquois Master Fund Ltd. (each, a “2013 Investor” and collectively, the “2013 Investors”). The 2013 Purchase Agreement provided that, upon the terms and subject to the conditions set forth therein, each of the 2013 Investors had committed to purchase such 2013 Investor’s pro rata portion of up to $20,000 (the “Total Commitment”) worth of the Company’s common stock, $0.001 par value (the “Shares”), over the 36-month term of the 2013 Purchase Agreement. In consideration for the execution and delivery of the 2013 Purchase Agreement, on November 8, 2013, the Company issued 2,666,667 shares of common stock (“the Commitment Shares”) to the 2013 Investors.

 

 
10

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine
Months Ended September 30, 2015 and 2014

(numbers in thousands, except share and per share data)

(unaudited)

 

From time to time over the term of the 2013 Purchase Agreement, the Company was able to, at its sole discretion, provide each of the 2013 Investors with draw down notices (each a “Draw Down Notice”) requiring them to purchase a specified dollar amount of Shares (the “Draw Down Amount”) over a five (5) consecutive trading day period commencing on the trading day specified in the applicable Draw Down Notice (the “Pricing Period”) with each draw down subject to the limitations discussed below. The maximum amount of Shares requested to be purchased pursuant to any single Draw Down Notice could not exceed a dollar amount equal to the lesser of (i) 300% of the average trading volume of the Company’s common stock during the ten (10) trading days immediately preceding the date the applicable Draw Down Notice was delivered (the “Applicable Draw Down Exercise Date”) multiplied by the lower of (A) the closing trade price of the Company’s common stock on the trading day immediately preceding the Applicable Draw Down Exercise Date and (B) the average of the closing trade prices of the Company’s common stock for the three (3) trading days immediately preceding the Applicable Draw Down Exercise Date (such lower price, the “Reference Price”), and (ii) a specified dollar amount set forth in the 2013 Purchase Agreement based on the Reference Price as of the Applicable Draw Down Exercise Date.

 

Once presented with a Draw Down Notice, each of the 2013 Investors was required to purchase such 2013 Investor’s pro rata portion of the applicable Draw Down Amount on each trading day during the applicable Pricing Period on which the daily volume weighted average price for the Company’s common stock (the “VWAP”) equaled or exceeded an applicable floor price equal to the product of (i) 0.775 and (ii) the Reference Price, subject to adjustment (the “Floor Price”), provided that in no event could the Floor Price be less than $0.03875 per share. If the VWAP fell below the applicable Floor Price on any trading day during the applicable Pricing Period, the 2013 Purchase Agreement provided that the 2013 Investors would not be required to purchase their pro rata portions of the applicable Draw Down Amount allocated to that trading day. The per share purchase price for the Shares subject to a Draw Down Notice was equal to 90% of the lowest daily VWAP that equaled or exceeded the applicable Floor Price during the applicable Pricing Period. Each purchase pursuant to a Draw Down Notice reduced, on a dollar-for-dollar basis, the Total Commitment under the 2013 Purchase Agreement.

 

The Company was prohibited from issuing a Draw Down Notice if (i) the amount requested in such Draw Down Notice exceeded certain caps based on trading volume and price, (ii) the sale of Shares pursuant to such Draw Down Notice caused the Company to issue or sell or the 2013 Investors to acquire or purchase an aggregate dollar value of Shares that exceeded the Total Commitment, (iii) the sale of Shares pursuant to the Draw Down Notice caused the Company to sell or the 2013 Investors to purchase an aggregate number of shares of the Company’s common stock which resulted in the collective beneficial ownership by the 2013 Investors of more than 9.99% of the Company’s common stock (as calculated pursuant to Section 13(d) of the Securities Exchange Act of 1934, as amended, and the rules and regulations thereunder), or (iv) the applicable Floor Price was less than $0.03875 per share on the Applicable Draw Down Exercise Date. The Company could not make more than one draw down in any Pricing Period and must have allowed two (2) trading days to elapse between the completion of the settlement of any one draw down and the commencement of a Pricing Period for any other draw down.

 

On February 11, 2014, an initial registration statement covering 96,555,893 shares issued and issuable pursuant to the 2013 Purchase Agreement was declared effective by the SEC.

 

As of December 31, 2014, the Company had received an aggregate of $16,000 under the 2013 Purchase Agreement through the issuance of 85,355,615 shares of its common stock at a weighted average price of $0.19 per share. On August 22, 2014, the Company voluntarily terminated the 2013 Purchase Agreement, effective August 25, 2014.

 

June 2012 Visser MTA

 

On June 1, 2012, the Company entered into a Master Transaction Agreement (the “Visser MTA”) with Visser Precision Cast, LLC (“Visser”) relating to a strategic transaction for manufacturing services and financing.

 

Under the manufacturing and service component of the Visser MTA, the Company had agreed to engage Visser as a perpetual, exclusive manufacturer of non-consumer electronic products and to not, directly or indirectly, conduct manufacturing operations, subcontract for the manufacture of products or components or grant a license to any other party to conduct manufacturing operations, except for certain limited exceptions. Under the financing component of the Visser MTA, the Company issued and sold to Visser in a private placement transaction (i) 30,000,000 shares of common stock at a purchase price of $0.10 per share resulting in proceeds of $3,000, (ii) warrants to purchase 15,000,000 shares of common stock at an original exercise price of $0.22 per share which were to expire on June 1, 2017 and (iii) a secured convertible promissory note in the aggregate principal amount of up to $2,000. No borrowings were made by the Company under the promissory note, and the deadline for making borrowings under the promissory note expired on November 15, 2012.

 

In November 2013, the Company and Visser entered into arbitration proceedings to resolve disputes associated with the Visser MTA.

 

On May 20, 2014, the Company and Visser entered into a settlement agreement under which they agreed to terminate the existing arbitration proceedings, release each other from all claims against each other and substantially change the business relationship that had been reflected in the original Visser MTA. As part of the settlement, the parties have amended and restated the sublicense and financing components of the Visser MTA. Additionally, the manufacturing services component and remaining considerations of the Visser MTA were terminated.  

 

 
11

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine
Months Ended September 30, 2015 and 2014

(numbers in thousands, except share and per share data)

(unaudited)

 

Under the amended and restated sublicense agreement, the Company has granted to Visser a fully paid-up, royalty-free, irrevocable, perpetual, worldwide, non-transferable, nonexclusive sublicense to all of the Company’s intellectual property developed on or prior to May 20, 2014 (the “Effective Date”), for all fields of use other than certain excluded fields as set forth therein. Visser does not have any rights, now or in the future, to intellectual property of the Company developed after the Effective Date. The license to the Company’s intellectual property developed on or prior to the Effective Date does not include the right to use the “Liquidmetal” trademark or any of the Company’s other trademarks, except in certain defined situations, as set forth in the amended and restated agreement.

 

With the foregoing revised arrangements, the Company is no longer required to use Visser as its exclusive manufacturer and is free to license other manufacturers on a non-exclusive basis in any industry or geographic market as to which the Company has not previously granted an exclusive license to a third party. Any such manufacturers licensed by the Company in the future will be able both to manufacture parts for the Company and the Company’s customers, and to manufacture and sell products for their own account for such industries or markets as the Company may agree, subject to whatever royalty arrangements the Company may negotiate. The Company has not yet licensed any manufacturers other than Visser. Visser will also have the right to manufacture and sell products under the amended and restated sublicense agreement.

 

The settlement amends and restates two warrants the Company issued to Visser in June 2012 to purchase 15,000,000 shares of the Company’s common stock at an exercise price of $0.22 per share. Those warrants contained anti-dilution mechanisms under which the number of shares issuable upon exercise of those warrants would be increased, and the exercise price for such shares would be reduced if the Company issued shares of its common stock at prices less than the warrants’ exercise price. The amended and restated warrant agreement includes the effect of such anti-dilution adjustments and is exercisable for 18,611,079 shares of common stock (increased further to 18,937,931 shares under the anti-dilution provisions of the warrants, see Note 11) at an exercise price of $0.18 per share (decreased to $0.17 per share under the anti-dilution provisions of the warrants, see Note 11). The amended and restated warrant agreement continues to contain comparable anti-dilution adjustment mechanisms. The amended and restated warrant agreement also removes certain lock-up provisions that were included in the original warrants.

 

Apple License Transaction

 

On August 5, 2010, the Company entered into a license transaction with Apple Inc. (“Apple”) pursuant to which (i) the Company contributed substantially all of its intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property, LLC (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products, as defined in the license agreement, in exchange for a license fee, and (iii) CIP granted back to the Company a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use. Additionally, in connection with the license transaction, Apple required the Company to complete a statement of work related to the exchange of Liquidmetal intellectual property information. The Company recognized a portion of the one-time license fee upon receipt of the initial payment and completion of the foregoing requirements under the license transaction. The remaining portion of the one-time license fee was recognized at the completion of the required statement of work.

 

Under the agreements relating to the license transaction with Apple, the Company was obligated to contribute, to CIP, all intellectual property that it developed through February 2012. Subsequently, this obligation has been extended to apply to all intellectual property developed through February 2016. The Company is also obligated to maintain certain limited liability company formalities with respect to CIP at all times after the closing of the license transaction.

 

Other License Transactions

 

On January 31, 2012, the Company entered into a Supply and License Agreement for a five year term with Engel Austria Gmbh (“Engel”) whereby Engel was granted a non-exclusive license to manufacture and sell injection molding machines to the Company’s licensees. Since that time, the Company and Engel have agreed on an injection molding machine configuration that can be commercially supplied and supported by Engel.  On December 6, 2013, the companies entered into an Exclusive License Agreement for a 10 year term whereby Engel was granted an exclusive license to manufacture and sell injection molding machines to the Company’s licensees in exchange for certain royalties to be paid by Engel to the Company based on a percentage of the net sales price of such injection molding machines.

 

The Company’s Liquidmetal Golf subsidiary has the exclusive right and license to utilize the Company’s Liquidmetal alloy technology for purposes of golf equipment applications. This right and license is set forth in an intercompany license agreement between Liquidmetal Technologies and Liquidmetal Golf. This license agreement provides that Liquidmetal Golf has a perpetual and exclusive license to use Liquidmetal alloy technology for the purpose of manufacturing, marketing, and selling golf club components and other products used in the sport of golf. The Company owns 79% of the outstanding common stock of Liquidmetal Golf.

 

In June 2003, the Company entered into an exclusive license agreement with LLPG, Inc. (“LLPG”).  Under the terms of the agreement, LLPG has the exclusive right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets.  The Company, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG. The exclusive license agreement with LLPG expires on December 31, 2021.

 

 
12

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine
Months Ended September 30, 2015 and 2014

(numbers in thousands, except share and per share data)

(unaudited)

 

In March 2009, the Company entered into a license agreement with Swatch Group, Ltd. (“Swatch”) under which Swatch was granted a non-exclusive license to the Company’s technology to produce and market watches and certain other luxury products. In March 2011, this license agreement was amended to grant Swatch exclusive rights as to watches with regard to all third parties (including the Company), but non-exclusive as to Apple, and the Company’s license agreement with LLPG was simultaneously amended to exclude watches from LLPG’s rights. The Company will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by Swatch. The license agreement with Swatch will expire on the expiration date of the last licensed patent. The Company recognized $0 and $24 in royalty revenues from Swatch during the three and nine months ended September 30, 2015. This compares to $0 and $32 in royalty revenues during the three and nine months ended September 30, 2014, respectively.

 

4. Liquidity and Capital Resources

 

For the nine months ended September 30, 2015, the Company’s cash used in operations was $5,250, cash used in investing activities was $2,656, primarily due to increases in restricted cash to support the line of credit facility, and cash provided by financing activities was $2,281, primarily due to cash received from equity sales under the 2014 Purchase Agreement and borrowings under the line of credit. As of September 30, 2015, the Company’s cash and restricted cash balance was $6,390, which consisted of $4,384 of cash and $2,006 of short-term restricted cash.

 

On August 20, 2014, the Company entered into the 2014 Purchase Agreement which allows it to raise up to $30,000 through periodic issuances of common stock over a three year period. As of September 30, 2015, the Company had received an aggregate of $1,568 under the 2014 Purchase Agreement through the issuance of 12,500,000 shares of its common stock at a weighted average price of $0.13 per share.

 

In February 2015, the Company entered into a $2,000 line of credit facility that will be used to fund future capital expenditures and general operations over the access period. This line of credit is secured by cash collateral and will terminate on February 13, 2016, subject to annual renewals and potential changes in collateral requirements. As of September 30, 2015, there was $700 in outstanding borrowings under this facility and $1,300 is available for future borrowings.

 

The Company anticipates that its current capital resources, when considering expected losses from operations, will be sufficient to fund the Company’s operations through the middle of 2016. The Company has a relatively limited history of producing bulk amorphous alloy components and products on a mass-production scale. Furthermore, the ability of future contract manufacturers to produce the Company’s products in desired quantities and at commercially reasonable prices is uncertain and is dependent on a variety of factors that are outside of the Company’s control, including the nature and design of the component, the customer’s specifications, and required delivery timelines. These factors will likely require that the Company make further equity sales under the 2014 Purchase Agreement, raise additional funds by other means, or pursue other strategic initiatives to support its operations beyond the middle of 2016. There is no assurance that the Company will be able to make equity sales under the 2014 Purchase Agreement or raise additional funds by other means on acceptable terms, if at all. If the Company were to make equity sales under the 2014 Purchase Agreement or to raise additional funds through other means by issuing securities, existing stockholders may be diluted. If funding is insufficient at any time in the future, the Company may be required to alter or reduce the scope of its operations or to cease operations entirely. Uncertainty as to the outcome of these factors raises substantial doubt about the Company’s ability to continue as a going concern.

 

5. Inventory

 

Inventory totaled $111 and $0 as of September 30, 2015 and December 31, 2014, respectively, and primarily consisted of raw alloy to be used in future production orders. Inventory is stated at the lower of weighted-average cost or market.

 

6. Prepaid Expenses and Other Current Assets

 

Prepaid expenses and other current assets totaled $391 and $374 as of September 30, 2015 and December 31, 2014, respectively, and primarily consisted of prepaid invoices and insurance premiums that will be recognized as expenses as shipments are made to customers or services are provided.

 

7. Patents and Trademarks, net

 

Net patents and trademarks totaled $595 and $669 as of September 30, 2015 and December 31, 2014, respectively, and primarily consisted of purchased patent rights and internally developed patents.

 

Purchased patent rights represent the exclusive right to commercialize the bulk amorphous alloy and other amorphous alloy technology acquired from California Institute of Technology (“Caltech”), through a license agreement with Caltech and other institutions. All fees and other amounts payable by the Company for these rights and licenses have been paid or accrued in full, and no further royalties, license fees or other amounts will be payable in the future under the license agreement.

     

In addition to the purchased and licensed patents, the Company has internally developed patents. Internally developed patents include legal and registration costs incurred to obtain the respective patents. The Company currently holds various patents and numerous pending patent applications in the United States, as well as numerous foreign counterparts to these patents outside of the United States.

 

 
13

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine
Months Ended September 30, 2015 and 2014

(numbers in thousands, except share and per share data)

(unaudited)

 

The Company amortizes capitalized patents and trademarks over an average of 10 to 17 year periods. Amortization expense for patents and trademarks was $24 and $74 for the three and nine month periods ended September 30, 2015, respectively. This compares to $25 and $78 for the three and nine months ended September 30, 2014, respectively.

 

 

8. Other Assets

 

Other assets totaled $31 and $31 as of September 30, 2015 and December 31, 2014, respectively, and consisted of deposits under long-term lease agreements.

 

 

9. Accrued Liabilities

 

Accrued liabilities totaled $990 and $705 as of September 30, 2015 and December 31, 2014, respectively. Included within these totals are employee related accruals for normal wages, bonuses, and vacation liabilities, of $830 and $567, as well as accrued audit fees of $90 and $95 as of September 30, 2015 and December 31, 2014, respectively. In addition, as of September 30, 2015 and December 31, 2014, respectively, $70 and $43 of deferred straight-line rent liabilities existed related to the Company’s warehouse and office facility lease.

 

10. Short-Term Debt

 

Short-term debt totaled $700 and $0 as of September 30, 2015 and December 31, 2014, respectively, and consisted of borrowings under a line of credit facility, with a fixed interest rate of 2.1%. Interest expense related to outstanding borrowings was $1 for both the three and nine months ended September 30, 2015.

 

This credit facility requires the Company to maintain collateral for the full amount of the facility. A failure to meet this requirement could trigger a prepayment of all outstanding borrowings.

 

Given the proximity to maturity, the carrying amount of short-term debt approximates fair value.

 

11. Warrant Liabilities

 

Pursuant to FASB ASC 815, the Company is required to report the value of certain warrants as a liability at fair value and record the changes in the fair value of the warrant liabilities as a gain or loss in its consolidated statement of operations and comprehensive loss due to the price-based anti-dilution rights of the warrants.

 

During June 2012, the Company issued warrants to purchase a total of 15,000,000 shares of common stock to Visser under the Visser MTA Agreement (see Note 3). These warrants had an original exercise price of $0.22 per share, expire on June 1, 2017 and were originally valued at $4,260. These warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815. As a result of subsequent issuances of the Company’s common stock, which resulted in anti-dilutive price resets, the exercise price of these warrants was reduced to $0.17 and $0.18 as of September 30, 2015 and December 31, 2014, respectively. In addition, the number of shares to be issued under the warrants as a result of the anti-dilution provision increased to 18,937,931 and 18,706,235 as of September 30, 2015 and December 31, 2014, respectively. As of September 30, 2015, these warrants were valued at $301 under the Black-Scholes valuation model utilizing the following assumptions: (i) expected life of 1.67 years, (ii) volatility of 64%, (iii) risk-free interest rate of 0.6%, and (iv) dividend rate of 0. The change in warrant value for these warrants was a gain of $546 and $752 for the three and nine months ended September 30, 2015, respectively.

 

On July 2, 2012, the Company issued warrants to purchase a total of 18,750,000 shares of common stock in a private placement (the “July 2012 Private Placement”). These warrants have an exercise price of $0.384 per share, expire on July 2, 2017, and were originally valued at $5,053. These warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815. As a result of executed draw-downs under the 2013 and 2014 Purchase Agreements, which resulted in an anti-dilution impact, as well as contractually defined price resets following the second anniversary of the July 2012 Private Placement, the exercise price of these warrants was reduced to $0.19 as of September 30, 2015 and December 31, 2014. As of September 30, 2015 there were warrants to purchase a total of 17,572,000 shares of common stock outstanding, which were valued at $378 under the Black-Scholes valuation model utilizing the following assumptions: (i) expected life of 1.75 years, (ii) volatility of 77%, (iii) risk-free interest rate of 0.6%, and (iv) dividend rate of 0. The change in warrant value for these warrants was a gain of $592 and $574 for the three and nine months ended September 30, 2015, respectively.

 

 

 
14

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine
Months Ended September 30, 2015 and 2014

(numbers in thousands, except share and per share data)

(unaudited)

 

The following table summarizes the change in the Company’s warrant liability as of September 30, 2015:

 

   

Visser MTA

   

July 2, 2012

         
   

Agreement

   

Private Placement

   

Total

 
                         

Beginning Balance - December 31, 2014

  $ 1,053     $ 952       2,005  

Change in value of warrant liability, (gain) loss

    (752 )     (574 )     (1,326 )

Ending Balance - September 30, 2015

  $ 301     $ 378     $ 679  

 

 

 

The Company had warrants to purchase 36,509,931 and 66,057,792 shares of common stock outstanding as of September 30, 2015 and December 31, 2014, respectively. Of these, warrants to purchase 36,509,931 and 36,278,235 shares, as of September 30, 2015 and December 31, 2014, respectively, were valued and classified as a liability under FASB ASC 815.

 

 

12. Other Long-term Liabilities  

 

Other long-term liabilities were $856 as of September 30, 2015 and December 31, 2014, and consisted of long-term, aged payables to vendors, individuals, and other third parties that have been outstanding for more than 5 years. The Company is in the process of researching and resolving the balances for settlement and/or escheatment in accordance with applicable state law.

 

13. Stock Compensation Plan

 

Under the Company’s 2002 Equity Incentive Plan (the “2002 Plan”), which provided for the grant of stock options to officers, employees, consultants and directors of the Company and its subsidiaries, the Company granted options to purchase the Company’s common stock. A total of 10,000,000 shares of the Company’s common stock were available for issuance under the 2002 Plan. The 2002 Plan expired by its terms in April 2012, but it will remain in effect only with respect to the equity awards that had been granted prior to its expiration. The Company had outstanding grants of options to purchase 910,000 and 1,725,000 shares of the Company’s common stock as of September 30, 2015 and December 31, 2014, respectively.

 

On June 28, 2012, the Company adopted its 2012 Equity Incentive Plan, with the approval of the Company’s stockholders, which provided for the grant of stock options to officers, employees, consultants and directors of the Company and its subsidiaries. All options granted under this plan had exercise prices that were equal to the fair market value on the dates of grant. During the nine months ended September 30, 2015, the Company granted options to purchase 1,885,000 shares of common stock. Under this plan, the Company had outstanding grants of options to purchase 26,548,733 and 28,815,899 shares of the Company’s common stock as of September 30, 2015 and December 31, 2014, respectively.

 

On January 27, 2015, the Company adopted its 2015 Equity Incentive Plan, which provided for the grant of stock options to officers, employees, consultants and directors of the Company and its subsidiaries. A total of 40,000,000 shares of the Company’s common stock are available for issuance under this plan. All options granted under this plan had exercise prices that were equal to the fair market value on the dates of grant. During the nine months ended September 30, 2015, the Company granted options to purchase 16,000,000 shares of common stock. Under this plan, the Company had outstanding grants of options to purchase 15,100,000 shares of the Company’s common stock as of September 30, 2015.

 

Stock based compensation expense attributable to these plans was $320 and $1,035 for the three and nine months ended September 30, 2015, respectively. This compares to $226 and $652 for the three and nine months ended September 30, 2014, respectively. The increase was due to higher grant date fair values associated with 2014 and 2015 stock option grants.

 

14. StockholdersEquity

 

Common stock

 

In June 2012, the Company issued 30,000,000 shares of common stock to Visser in connection with the Visser MTA Agreement (see Note 3).

 

Pursuant to the terms of the Company’s Senior Convertible Notes due September 1, 2013, which were also issued in the July 2012 Private Placement, the Company opted to pay the twelve monthly installment payments prior to the September 1, 2013 maturity date with shares of the Company’s common stock. Upon final settlement, the Company had issued 163,641,547 shares of common stock at a weighted average conversion price of $0.0774, for the twelve installment payments due under the notes, consisting of $12,000 principal and $680 of interest.

 

 
15

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine
Months Ended September 30, 2015 and 2014

(numbers in thousands, except share and per share data)

(unaudited)

 

During the year ended December 31, 2013, the holders of the Company’s Series A Preferred Stock converted all of the outstanding 506,936 shares of Series A Preferred Stock into 16,896,070 shares of the Company’s common stock (see “Preferred stock” below). After giving effect to such conversion, the Company has no shares of preferred stock outstanding.

 

On February 28, 2013, the Company’s stockholders approved an amendment to the Certificate of Incorporation of the Company increasing the number of authorized shares of common stock from 400 million shares to 500 million shares.

 

On October 24, 2013, the Company’s stockholders approved an amendment to the Company’s Certificate of Incorporation increasing the number of authorized shares of common stock from 500 million shares to 700 million shares.

 

In connection with the execution of the 2013 Purchase Agreement, the Company issued to each of the 2013 Investors a pro rata portion of 2,666,667 shares of the Company’s common stock. As of December 31, 2014, the Company had received an aggregate of $16,000 under the 2013 Purchase Agreement through the issuance of 85,355,615 shares of its common stock at a weighted average price of $0.19 per share. On August 22, 2014, the Company voluntarily terminated the 2013 Purchase Agreement, effective August 25, 2014 (see Note 3).

 

On September 9, 2014, an initial registration statement covering 75,000,000 shares issued and issuable pursuant to the 2014 Purchase Agreement was declared effective by the SEC. As of September 30, 2015, the Company had received an aggregate of $1,568 under the 2014 Purchase Agreement through the issuance of 12,500,000 shares of its common stock at a weighted average price of $0.13 per share (see Note 3).

 

Preferred stock

 

On May 1, 2009, pursuant to a Securities Purchase and Exchange Agreement, the Company issued 500,000 shares of convertible Series A-1 Preferred Stock with an original issue price of $5.00 per share and 2,625,000 shares of Series A-2 Preferred Stock with an original issue price of $5.00 per share as part of a financing transaction (the Series A-1 Preferred Stock and the Series A-2 Preferred Stock are referred to collectively herein as the “Series A Preferred Stock”). In connection with this Series A Preferred Stock issuance, the Company issued warrants to purchase 42,329,407 shares of the Company’s common stock at an exercise price of $0.50 per share, which was subsequently adjusted to $0.49 per share due to an anti-dilution calculation. These warrants expired on July 15, 2015.

 

The Series A Preferred Stock and any accrued and unpaid dividends thereon was convertible, at the option of the holders of the Series A Preferred Stock, into common stock of the Company at a conversion price of $0.10 per share in the case of the Series A-1 Preferred Stock and a conversion price of $0.22 per share in the case of the Series A-2 Preferred Stock (in both cases subject to adjustments for any stock dividends, splits, combinations and similar events).

 

During the year ended December 31, 2012, the holders of the Company’s Series A Preferred Stock converted 792,215 shares of preferred stock into 25,669,752 shares of the Company’s common stock. As of December 31, 2012, the Company had 506,936 shares of Series A Preferred Stock outstanding, consisting of 105,231 and 401,705 shares of Series A-1 and Series A-2 Preferred Stock, respectively. Preferred stock as of December 31, 2012 was $0 due to an insignificant balance, and accrued dividends on the Series A Preferred Stock as of December 31, 2012 were $222.

 

During the year ended December 31, 2013, all of the holders of the Company’s Series A Preferred Stock converted all of the outstanding shares of preferred stock and accrued dividends into 16,896,070 shares of the Company’s common stock. Therefore, as of December 31, 2013, the Company no longer had any outstanding Preferred Stock and the related $222 accrued dividends were reclassified to additional paid-in capital as of December 31, 2013.

 

Warrants

 

In connection with the Series A Preferred Stock issuances in 2009, warrants to purchase 29,779,557 shares of the Company’s common stock, valued at $18,179, were outstanding through July 15, 2015. Due to extension of the expiration date of these warrants during 2010, they no longer contained anti-dilution provisions and were reflected as equity as they did not meet the criteria under FASB ASC 815 for liability treatment. Such warrants had exercise prices ranging between $0.48 and $0.49 and expired on July 15, 2015.

 

Non-Controlling Interest

 

The Company’s Liquidmetal Golf subsidiary has the exclusive right and license to utilize the Company’s Liquidmetal alloy technology for purposes of golf equipment applications. Liquidmetal Technologies owns 79% of the outstanding common stock of Liquidmetal Golf. As of September 30, 2015, non-controlling interest was a deficit of $60. The December 31, 2014 non-controlling interest was a deficit of $54.

 

15. Loss Per Common Share

 

Basic earnings per share (“EPS”) is computed by dividing earnings (loss) attributable to common stockholders by the weighted average number of common shares outstanding for the periods. Diluted EPS reflects the potential dilution of securities that could share in the earnings.

 

 
16

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine
Months Ended September 30, 2015 and 2014

(numbers in thousands, except share and per share data)

(unaudited)

 

Options to purchase 42,558,733 shares of common stock, at prices ranging from $0.08 to $1.44 per share, were outstanding at September 30, 2015, but were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss. Warrants to purchase 36,509,931 shares of common stock, with prices ranging from $0.17 to $0.19 per share, outstanding at September 30, 2015 were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss.

 

Options to purchase 27,650,066 shares of common stock, at prices ranging from $0.08 to $2.33 per share, were outstanding at September 30, 2014, but were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss. Warrants to purchase 66,057,792 shares of common stock, with prices ranging from $0.18 to $0.49 per share, outstanding at September 30, 2014 were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss.

 

 

16. Commitments and Contingencies

 

Operating Lease Commitments

 

The Company leases its offices and warehouse facilities under various lease agreements, certain of which are subject to escalations based upon increases in specified operating expenses or increases in the Consumer Price Index. As of September 30, 2015 and December 31, 2014, the Company had recorded $70 and $43, respectively, of deferred rent expenses.

 

Rent expense was $56 and $169 for the three and nine months ended September 30, 2015, respectively. Rent expense was $50 and $150 for the three and nine months ended September 30, 2014, respectively.

 

 

17. Related Party Transactions

 

The Company entered into a license agreement (the “IMG License Agreement”) with Innovative Materials Group, LLC (“IMG”), a California limited liability company which is majority owned by Mr. Kang, a former Chief Executive Officer and former Chairman of the Company, to license certain patents and technical information for the limited purpose of manufacturing certain licensed products with the Company’s first generation die cast machines. The IMG License Agreement granted a non-exclusive license to certain product categories, as well as an exclusive license to specific types of consumer eyewear products and obligated IMG to pay the Company a running royalty based on its sales of licensed products through August 5, 2021. The Company recognized $0 in royalty revenues from IMG during the three and nine months ended September 30, 2015. This compares to $1 and $5 in royalty revenues during the three and nine months ended September 30, 2014, respectively.

 

Mr. Thomas Steipp, the Company’s Chief Executive Officer, sold an aggregate of 400,000 shares of the common stock of the Company on August 5, 2013 pursuant to a trading plan that Mr. Steipp previously adopted under SEC Rule 10b5-1 under the Securities Exchange Act of 1934, as amended. Mr. Steipp adopted the trading plan on March 22, 2013 for the purpose of providing him with funds to satisfy certain tax liabilities as a result of the vesting on August 3, 2013 of 1,200,000 shares of Company restricted common stock held by Mr. Steipp. The restricted shares were granted to Mr. Steipp in 2010 under a previously disclosed Restricted Stock Award Agreement, dated August 3, 2010, between Mr. Steipp and the Company. On March 27, 2014, Mr. Steipp adopted a new 10b5-1 trading plan that allowed for the sale of 500,000 shares of common stock of the Company on August 4, 2014 and August 4, 2015 to satisfy similar tax liabilities.

 

In September 2013, the Company entered into Change of Control Agreements with Tony Chung, the Company’s Chief Financial Officer, and certain other executive officers who are not named executive officers of the Company for SEC reporting purposes. The Change of Control Agreements provide that if the executive officer’s employment with the Company is terminated without cause during the one-year period after a change of control of the Company, then the terminated officer will receive lump sum severance compensation in an amount equal to twelve months of his then-current base salary. Under the agreements, each of the executive officers will also be entitled to the above-described severance compensation in the event he terminates his own employment within one year after a change of control because of a salary decrease or assignment to a lower-level position. In addition, upon termination, all unvested stock options related to these officers will automatically and immediately vest and shall thereafter be exercisable in accordance with the terms and provisions of the applicable award agreements.

 

The Company has an exclusive license agreement with LLPG, Inc. (“LLPG”), a corporation owned principally by Jack Chitayat, a former director of the Company. Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets.  The Company, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG. The exclusive license agreement with LLPG expires on December 31, 2021. There were no revenues recognized from product sales and licensing fees from LLPG during the nine months ended September 30, 2015 or 2014.

 

 
17

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine
Months Ended September 30, 2015 and 2014

(numbers in thousands, except share and per share data)

(unaudited)

 

On June 1, 2012, the Company entered into the Visser MTA relating to a strategic transaction for manufacturing services and financing. In November 2013, the Company and Visser entered into arbitration proceedings to resolve disputes associated with this agreement. As part of the May 2014 settlement of these proceedings, the Company has granted to Visser a fully paid-up, royalty-free, irrevocable, perpetual, worldwide, non-transferable, nonexclusive sublicense to all of the Company’s intellectual property developed on or prior to May 20, 2014, for all fields of use other than certain excluded fields as set forth therein. Visser does not have any rights, now or in the future, to intellectual property of the Company developed after the Effective Date of the agreement. The license to the Company’s intellectual property does not include the right to use the “Liquidmetal” trademark or any of the Company’s other trademarks, except in certain defined situations, as set forth in the amended and restated agreement entered into in connection with the settlement (see Note 3). As of September 30, 2015, Visser is a greater-than-5% beneficial owner of the Company.

 

 

 

 
18

 

 

Item 2 – Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

This management’s discussion and analysis should be read in conjunction with the consolidated financial statements and notes included elsewhere in this Quarterly Report on Form 10-Q. All amounts described in this section are in thousands, except percentages, periods of time, and share and per share data.

 

This management’s discussion and analysis, as well as other sections of this Quarterly Report on Form 10-Q, may contain “forward-looking statements” that involve risks and uncertainties, including statements regarding our plans, future events, objectives, expectations, forecasts, or assumptions. Any statement that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as “believe,” “estimate,” “project,” “expect,” “intend,” “may,” “anticipate,” “plan,” “seek,” and similar words or expressions identify forward-looking statements. These statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results, and undue reliance should not be placed on these statements. These risks and uncertainties include, but are not limited to, the matters discussed under the heading “Item 1A. Risk Factors” in our Annual Report on Form 10-K for the fiscal year ended December 31, 2014 and other risks and uncertainties discussed in other filings made with the Securities and Exchange Commission (including risks described in subsequent reports on Form 10-Q and Form 8-K and other filings). We disclaim any intention or obligation, other than as required by applicable law, to update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise.

 

 

Overview

 

We are a materials technology company that develops and commercializes products made from amorphous alloys.  Our Liquidmetal® family of alloys consists of a variety of proprietary bulk alloys and composites that utilize the advantages offered by amorphous alloy technology. We design, develop and sell products and components from bulk amorphous alloys to customers in various industries. We also partner with third-party manufacturers and licensees to develop and commercialize Liquidmetal alloy products.

 

Amorphous alloys are, in general, unique materials that are distinguished by their ability to retain a random atomic structure when they solidify, in contrast to the crystalline atomic structures that form in other metals and alloys when they solidify. Liquidmetal alloys are proprietary amorphous alloys that possess a combination of performance, processing, and potential cost advantages that we believe will make them preferable to other materials in a variety of applications. The amorphous atomic structure of our alloys enables them to overcome certain performance limitations caused by inherent weaknesses in crystalline atomic structures, thus facilitating performance and processing characteristics superior in many ways to those of their crystalline counterparts. For example, in laboratory testing, our zirconium-titanium Liquidmetal alloys are approximately 250% stronger than commonly used titanium alloys such as Ti-6Al-4V, but they also have some of the beneficial processing characteristics more commonly associated with plastics. We believe these advantages could result in Liquidmetal alloys supplanting high-performance alloys, such as titanium and stainless steel, and other incumbent materials in a variety of applications. Moreover, we believe these advantages could enable the introduction of entirely new products and applications that are not possible or commercially viable with other materials.

 

Our revenues can be derived from (i) selling our bulk Liquidmetal alloy products, which include non-consumer electronic devices, aerospace parts, medical products, automotive components, oil and gas exploration, and sports and leisure goods, (ii) selling tooling and prototype parts such as demonstration parts and test samples for customers with products in development, (iii) product licensing and royalty revenue, and (iv) research and development revenue.  

 

Our cost of sales consists primarily of the costs of outsourcing our manufacturing to third parties. Selling, general, and administrative expenses currently consist primarily of salaries and related benefits, travel, consulting and professional fees, depreciation and amortization, insurance, office and administrative expenses, and other expenses related to our operations.

 

Research and development expenses represent salaries, related benefits expense, depreciation of research equipment, consulting and contract services, expenses incurred for the design and testing of new processing methods, expenses for the development of sample and prototype products, and other expenses related to the research and development of Liquidmetal bulk alloys. Costs associated with research and development activities are expensed as incurred. We plan to enhance our competitive position by improving our existing technologies and developing advances in amorphous alloy technologies. We believe that our research and development efforts will focus on the discovery of new alloy compositions, the development of improved processing technology, and the identification of new applications for our alloys.

 

Licensing Transactions

 

Transaction with Visser Precision Cast, LLC

 

On June 1, 2012, we entered into a Master Transaction Agreement (the “Visser MTA Agreement”) with Visser Precision Cast, LLC (“Visser”) relating to a strategic transaction for manufacturing services and financing.

 

Under the manufacturing and service component of the Visser MTA Agreement, we had agreed to engage Visser as a perpetual, exclusive manufacturer of non-consumer electronic products and to not, directly or indirectly, conduct manufacturing operations, subcontract for the manufacture of products or components or grant a license to any other party to conduct manufacturing operations, except for certain limited exceptions. Under the financing component of the Visser MTA Agreement, we issued and sold to Visser in a private placement transaction (i) 30,000,000 shares of common stock at a purchase price of $0.10 per share resulting in proceeds of $3,000, (ii) warrants to purchase 15,000,000 shares of common stock at an original exercise price of $0.22 per share which were to expire on June 1, 2017 and (iii) a secured convertible promissory note in the aggregate principal amount of up to $2,000. No borrowings were made by us under the promissory note, and the deadline for making borrowings under the promissory note expired on November 15, 2012.

  

 
19

 

 

In November 2013, we entered into arbitration proceedings with Visser to resolve disputes associated with the Visser MTA Agreement.

 

On May 20, 2014, we entered into a settlement with Visser pursuant to which we and Visser agreed to terminate the existing arbitration proceedings, release each other from all claims we may have had against each other and substantially change the business relationship that had been reflected in the original Visser MTA Agreement. As part of the settlement, we and Visser have amended and restated the sublicense and financing components of the Visser MTA Agreement. Additionally, the manufacturing services component and remaining considerations of the Visser MTA Agreement were terminated.

 

Under the amended and restated sublicense agreement, we have granted to Visser a fully paid-up, royalty-free, irrevocable, perpetual, worldwide, non-transferable, nonexclusive sublicense to all of our intellectual property developed on or prior to May 20, 2014 (the “Effective Date”), for all fields of use other than certain excluded fields as set forth therein. Visser does not have any rights, now or in the future, to our intellectual property developed after the Effective Date of the agreement. The license to our intellectual property developed on or prior to the Effective Date does not include the right to use the “Liquidmetal” trademark or any of our other trademarks, except in certain defined situations, as set forth in the amended and restated agreement.

 

With the foregoing revised arrangements, we are no longer required to use Visser as our exclusive manufacturer and are free to license other manufacturers on a non-exclusive basis in any industry or geographic market as to which we have not previously granted an exclusive license to a third party. Any such manufacturers licensed by us in the future will be able both to manufacture parts for us and our customers, and manufacture and sell products for their own account for such industries or markets as we may agree, subject to whatever royalty arrangements we may negotiate. We have not yet licensed any manufacturers other than Visser. Visser will also have the right to manufacture and sell products under the amended and restated sublicense agreement.

 

The settlement amends and restates two warrants we issued to Visser in June 2012 to purchase 15,000,000 shares of our common stock at an exercise price of $0.22 per share. Those warrants contained anti-dilution mechanisms under which the number of shares issuable upon exercise of those warrants would be increased, and the exercise price for such shares would be reduced if we issued shares of our common stock at prices less than the warrants’ exercise price. The amended and restated warrant agreement includes the effect of such anti-dilution adjustments and is exercisable for 18,611,079 shares of common stock (increased further to 18,937,931 shares under the anti-dilution provisions of the warrants, see Note 11) at an exercise price of $0.17 per share as of September 30, 2015. The amended and restated warrant agreement continues to contain comparable anti-dilution adjustment mechanisms. The amended and restated warrant agreement also removes certain lock-up provisions that were included in the original warrants. These warrants expire on June 1, 2017.

 

Apple License Transaction

 

On August 5, 2010, we entered into a license transaction with Apple Inc. (“Apple”) pursuant to which (i) we contributed substantially all of our intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property, LLC (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products, as defined in the license agreement, in exchange for a license fee, and (iii) CIP granted back to us a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use.

 

Under the agreements relating to the license transaction with Apple, we were obligated to contribute to CIP all intellectual property that we developed through February 2012 (“Capture Period”). Subsequently, we have amended the Capture Period to extend through February 2016. We are also obligated to maintain certain limited liability company formalities with respect to CIP at all times after the closing of the license transaction.

 

Other License Transactions

 

On January 31, 2012, we entered into a Supply and License Agreement for a five year term with Engel Austria Gmbh (“Engel”) whereby Engel was granted a non-exclusive license to manufacture and sell injection molding machines to our licensees. Since that time, we and Engel have agreed on an injection molding machine configuration that can be commercially supplied and supported by Engel. On December 6, 2013, the companies entered into an Exclusive License Agreement for a 10 year term whereby Engel was granted an exclusive license to manufacture and sell injection molding machines to our licensees in exchange for certain royalties to be paid by Engel to us based on a percentage of the net sales price of such injection molding machines.

 

Our Liquidmetal Golf subsidiary has the exclusive right and license to utilize our Liquidmetal alloy technology for purposes of golf equipment applications. This right and license is set forth in an intercompany license agreement between Liquidmetal Technologies and Liquidmetal Golf. This license agreement provides that Liquidmetal Golf has a perpetual and exclusive license to use Liquidmetal alloy technology for the purpose of manufacturing, marketing, and selling golf club components and other products used in the sport of golf. We own 79% of the outstanding common stock of Liquidmetal Golf.

 

 
20

 

  

In June 2003, we entered into an exclusive license agreement with LLPG, Inc. (“LLPG”). Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets. We, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG. The exclusive license agreement with LLPG expires on December 31, 2021.

 

In March 2009, we entered into a license agreement with Swatch Group, Ltd. (“Swatch”) under which Swatch was granted a non-exclusive license to our technology to produce and market watches and certain other luxury products. In March 2011, this license agreement was amended to grant Swatch exclusive rights as to watches with regard to all third parties (including us), but non-exclusive as to Apple, and our license agreement with LLPG was simultaneously amended to exclude watches from LLPG’s rights. We will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by Swatch. The license agreement with Swatch will expire on the expiration date of the last licensed patent.

 

Critical Accounting Policies and Estimates

 

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States requires us to make estimates and assumptions that affect reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. These estimates and assumptions are based on historical experience and various other factors that are believed to be reasonable under the circumstances. Actual results could differ materially from these estimates under different assumptions or conditions.

 

We believe that the following accounting policies are the most critical to our consolidated financial statements since these policies require significant judgment or involve complex estimates that are important to the portrayal of our financial condition and operating results:

 

 

 

Revenue recognition

 
 

 

Impairment of long-lived assets and definite-lived intangibles

 

 

 

Deferred tax assets

 

 

 

Valuation of liability classified warrants

 
 

 

Share based compensation

 

 

Our Annual Report on Form 10-K for the year ended December 31, 2014 (the “2014 Annual Report”) contains further discussions on our critical accounting policies and estimates.

 

 
21

 

 

 

Results of Operations  

 

Comparison of the three and nine months ended September 30, 2015 and 2014

 

   

For the three months ended September 30,

   

For the nine months ended September 30,

 
   

2015

   

2014

   

2015

 

2014

 
    (unaudited)     (unaudited)     (unaudited)   (unaudited)  
   

in 000's

   

% of

Products

Revenue

   

in 000's

   

% of

Products

Revenue

   

in 000's

   

% of

Products

Revenue

   

in 000's

   

% of

Products

Revenue

 
                                                                 

Revenue:

                                                               

Products

  $ 42             $ 97             $ 80             $ 374          

Licensing and royalties

    -               -               27               36          

Total revenue

    42               97               107               410          
                                                                 

Cost of sales

  $ 160       381 %     85       88 %   $ 312       390 %     300       80 %
                                                                 

Gross profit (loss)

    (118 )     -281 %     12       12 %     (205 )     -256 %     110       29 %
                                                                 

Selling, marketing, general and administrative

    1,763       4198 %     1,847       1904 %     5,506       6883 %     5,719       1529 %

Research and development

    491       1169 %     498       513 %     1,428       1785 %     1,224       327 %
                                                                 

Operating loss

    (2,372 )             (2,333 )             (7,139 )             (6,833 )        
                                                                 

Change in value of warrants, gain (loss)

    1,138               1,595               1,326               (276 )        

Debt discount amortization expense

    -               (321 )             -               (373 )        

Interest expense

    (1 )             -               (1 )             -          

Interest and other income

    5               41               19               43          

Net loss

    (1,230 )             (1,018 )             (5,795 )             (7,439 )        

 

 

In discussing our results of our operations, we have categorized the specific items of our consolidated statements of operations into various categories to facilitate the understanding of our core business operations. Explanations of each category as well as analyses of specific items contained in that category are discussed below:

 

Operating revenue and expenses

 

The “Operating revenue and expenses” category of statements of operations items represent those items that pertain to our core operations in the bulk alloy manufacturing and licensing business as follows:

 

Revenue. Total revenue decreased to $42 for the three months ended September 30, 2015 from $97 for the three months ended September 30, 2014. Total revenue also decreased to $107 for the nine months ended September 30, 2015 from $410 for the nine months ended September 30, 2014. The decrease for both periods was primarily attributable to a reduction in research and development services provided to licensees during 2015 as a result of a shift towards on-site production and prototyping activities with customers to further develop and support the commercialization of our technology.

 

Cost of sales. Cost of sales was $160, or 381% of products revenue, for the three months ended September 30, 2015, a decrease from $85, or 88% of products revenue, for the three months ended September 30, 2014. Cost of sales was $312, or 390% of products revenue, for the nine months ended September 30, 2015, a decrease from $300, or 80% of products revenue, for the nine months ended September 30, 2014. The increase in our cost of sales as a percentage of product revenue for both the three and nine month periods ended September 30, 2015 was primarily attributable to higher costs associated with initial manufacturing activities than previously encountered when providing product development and prototyping services to customers. In addition, both the three and nine month periods ended September 30, 2015 contain a one-time charge of $106 for the write-off of capitalized tooling costs deemed to be unrecoverable under the terms of an existing customer order. The cost to manufacture parts from our bulk alloys manufacturing business is variable and differs based on the unique design of each product. Given the continued development and refinement of our manufacturing efforts during the three and nine month periods ended September 30, 2015, our cost of sales as a percentage of products revenue is not necessarily representative of our future cost percentages and is expected to improve over time with increases in volume and continued improvements to our internal processes. When we begin increasing our products revenues with shipments of routine, commercial parts through our manufacturing facility and/or third party contract manufacturers, we expect our cost of sales percentages to decrease, stabilize and be more predictable.

 

 

 
22

 

 

Gross profit (loss). Our gross profit (loss) decreased to $(118) from $12 for the three month periods ended September 30, 2015 and 2014, respectively. Our gross profit (loss), as a percentage of products revenue, decreased to (281)% from 12% for the three month periods ended September 30, 2015 and 2014, respectively. Our gross margin decreased to $(205) from $110 for the nine month periods ended September 30, 2015 and 2014, respectively. Our gross profit (loss), as a percentage of products revenue, decreased to (256)% from 29% for the nine month periods ended September 30, 2015 and 2014, respectively. As discussed above under “Cost of sales”, early production orders are resulting in a higher cost mix, relative to revenue, than would otherwise be incurred in an on-site production environment, with higher volumes and more established operating processes, or through contract manufacturers. As such, our gross profit (loss) percentages have fluctuated and may continue to fluctuate based on volume and quoted production prices per unit and may not be representative of our future business. When we begin increasing our products revenues with shipments of routine, commercial parts through future orders to our manufacturing facility and/or third party contract manufacturers, we expect our gross profit percentages to stabilize, increase and be more predictable.

 

Selling, marketing, general and administrative. Selling, marketing, general and administrative expenses were $1,763 and $5,506 for the three and nine months ended September 30, 2015, respectively, compared to $1,847 and $5,719 for the three and nine months ended September 30, 2014, respectively. The decrease in expense for both periods is due to additional legal costs incurred during 2014 in conjunction with the arbitration proceeding and settlement discussions with Visser.

 

Research and development. Research and development expenses increased to $491 and $1,428 for the three and nine months ended September 30, 2015, respectively, from $498 and $1,224 for the three and nine months ended September 30, 2014, respectively. The increase in the year-to-date totals was mainly due to additional research projects and additional personnel hires to support our manufacturing and process development efforts. We continue to (i) perform research and development of new Liquidmetal alloys and related processing capabilities, (ii) develop new manufacturing techniques, and (iii) contract with consultants to advance the development of Liquidmetal alloys and related production processes.  

 

Operating loss. Operating loss was $2,372 and $7,139 for the three and nine month periods ended September 30, 2015, respectively. This compares to $2,333 and $6,833 for the three and nine month periods ended September 30, 2014, respectively. The increase in our operating loss is primarily attributable to the decrease in our gross margin for both periods, as discussed above.

 

We continue to invest in our technology infrastructure to expedite the adoption of our technology, but we have experienced long sales lead times for customer adoption of our technology. Until that time where we can either (i) increase our revenues with shipments of routine, commercial parts through a combination of our manufacturing center or third party contract manufacturers or (ii) obtain significant licensing revenues, we expect to continue to have operating losses for the foreseeable future.

 

Non-operational expenses

 

Our statement of operations contains various, significant items that are non-operational in nature. These categories of expenses may have significant gains and losses based on the volatility of our stock price as follows:

 

Change in value of warrants. The change in value of warrants was a non-cash gain of $1,138 and $1,326 for the three and nine months ended September 30, 2015, respectively. This compares to a non-cash gain (loss) of $1,595 and $(276) for the three and nine months ended September 30, 2014, respectively. These adjustments result from periodic valuation adjustments related to fluctuations in our stock price for warrants issued in connection with the Visser MTA Agreement and our Senior Convertible Notes issued in our private placement that closed in July 2012 (the “July 2012 Private Placement”). Changes in the value of our warrants are non-cash and do not affect the core operations of our business or liquidity.

 

Debt discount amortization. Debt discount amortization expense was $0 of non-cash expense for the both the three and nine months ended September 30, 2015. For the three and nine months ended September 30, 2014, debt discount amortization expense was $321 and $373, respectively, and primarily related to the periodic amortization of issuance costs associated with the 2013 Purchase Agreement (as defined and discussed in Note 3). No such costs were incurred during 2015 following the termination of the 2013 Purchase Agreement in the third quarter of 2014.

 

Interest expense. Interest expense relates to interest incurred under our line of credit agreement. Such amounts were $1 and $1 for the three and nine month periods ended September 30, 2015, respectively. This compares to zero for both of the comparable periods in 2014.

 

Interest income and other income. Interest income relates to interest earned from our cash deposits for the respective periods. Such amounts were $5 and $19 for the three and nine month periods ended September 30, 2015, respectively. This compares to $11 and $14 for the three and nine month periods ended September 30, 2014, respectively. Also reflected as other income for the three and nine months ended September 30, 2014 is the sale of our remaining membership interest in a former subsidiary that was recorded as a cost method investment. No such amounts were recorded in 2015.

 

Liquidity and Capital Resources 

 

For the nine months ended September 30, 2015, our cash used in operations was $5,250, cash used in investing activities was $2,656, primarily due to increases in restricted cash to support our line of credit facility, and cash provided by financing activities was $2,281, primarily due to equity sales under the 2014 Purchase Agreement (as defined below) and borrowings under our line of credit. For the nine months ended September 30, 2014, our cash used in operations was $5,630, cash used in investing activities was $961 and cash provided by financing activities was $16,431. As of September 30, 2015, our cash and restricted cash balance was $6,390, which consisted of $4,384 of cash and $2,006 of short-term restricted cash.

 

 
23

 

 

On August 20, 2014, we entered into a common stock purchase agreement (“2014 Purchase Agreement”) with Aspire Capital Fund LLC (“Aspire Capital”), which provides that, upon the terms and subject to the conditions and limitations set forth therein, Aspire Capital is committed to purchase up to an aggregate of $30,000 worth of our common stock, $0.001 par value, over the 36-month term of the 2014 Purchase Agreement.

 

From time to time over the term of the 2014 Purchase Agreement, we may, in our sole discretion, provide Aspire Capital with a regular purchase notice (each a “Regular Purchase Notice”) directing Aspire Capital to purchase up to 1,000,000 shares, but not to exceed $400, of our common stock per trading day at a price per share equal to the lesser of (i) the lowest sale price of our common stock on the purchase date; or (ii) the arithmetic average of the three lowest closing sale prices for our common stock during the twelve consecutive trading days ending on the trading day immediately preceding the purchase date. In addition, on any date on which we submit a Regular Purchase Notice to Aspire Capital for the purchase of at least 500,000 shares at a price above $0.30 per share, we also have the right, in our sole discretion, to present Aspire Capital with a volume-weighted average price purchase notice (each, a “VWAP Purchase Notice”) directing Aspire Capital to purchase an amount of stock equal to up to 30% of the aggregate shares of our common stock traded on its principal market on the next trading day (the “VWAP Purchase Date”), subject to a maximum number of shares that we may determine. The purchase price per share pursuant to such VWAP Purchase Notice is generally 95% of the volume-weighted average price for our common stock traded on its principal market on the VWAP Purchase Date.

 

We may deliver multiple Regular Purchase Notices and VWAP Purchase Notices to Aspire Capital from time to time during the term of the 2014 Purchase Agreement, so long as the most recent purchase has been completed. The 2014 Purchase Agreement provides that we and Aspire Capital shall not effect any sales under the 2014 Purchase Agreement on any purchase date where the closing sale price of our common stock is less than $0.10 per share. There are no trading volume requirements or restrictions under the 2014 Purchase Agreement, and we will control the timing and amount of sales of our common stock to Aspire Capital.

 

On September 9, 2014, an initial registration statement covering 75,000,000 shares issued and issuable pursuant to the 2014 Purchase Agreement was declared effective by the SEC. As of September 30, 2015, we had received an aggregate of $1,568 under the 2014 Purchase Agreement through the issuance of 12,500,000 shares of our common stock at a weighted average price of $0.13 per share.

 

In February 2015, we entered into a $2,000 line of credit facility that will be used to fund future capital expenditures and general operations over the access period. This line of credit is secured by cash collateral and will terminate on February 13, 2016, subject to annual renewals and potential changes in collateral requirements. As of September 30, 2015, there was $700 in outstanding borrowings under this facility and $1,300 is available for future borrowings.

 

We anticipate that our current capital resources, when considering expected losses from operations, will be sufficient to fund our operations through the middle of 2016. We have a relatively limited history of producing bulk amorphous alloy components and products on a mass-production scale. Furthermore, the ability of future contract manufacturers to produce our products in desired quantities and at commercially reasonable prices is uncertain and is dependent on a variety of factors that are outside of our control, including the nature and design of the component, the customer’s specifications, and required delivery timelines. These factors will likely require that we make further equity sales under the 2014 Purchase Agreement, raise additional funds by other means, or pursue other strategic initiatives to support our operations beyond the middle of 2016. There is no assurance that we will be able to make equity sales under the 2014 Purchase Agreement or raise additional funds by other means on acceptable terms, if at all. If we were to make equity sales under the 2014 Purchase Agreement or to raise additional funds through other means by issuing securities, existing stockholders may be diluted. If funding is insufficient at any time in the future, we may be required to alter or reduce the scope of our operations or to cease operations entirely. Uncertainty as to the outcome of these factors raises substantial doubt about our ability to continue as a going concern.

 

 

Off Balance Sheet Arrangements 

 

As of September 30, 2015, we did not have any off-balance sheet arrangements.

 

Item 3 – Quantitative and Qualitative Disclosures about Market Risk

 

Interest Rate Risk

 

Our line of credit facility provides for a fixed interest rate of 2.1% per annum on all outstanding borrowings. A change in interest rates impacts the fair value of our outstanding debt under the line of credit facility but has no impact on interest incurred or cash flows.  As of September 30, 2015, there was $700 in outstanding borrowings under this facility. Given the proximity to maturity, the carrying amount of short-term debt approximates fair value as of September 30, 2015.

 

 
24

 

 

Item 4 – Controls and Procedures

 

Evaluation of Disclosure Controls and Procedures

 

Under the supervision and with the participation of our management, including our Chief Executive Officer (Principal Executive Officer) and Chief Financial Officer (Principal Financial Officer), we carried out an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) as of September 30, 2015. Based on their evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that our disclosure controls and procedures were effective as of September 30, 2015.

 

Changes in Internal Control over Financial Reporting.

 

There were no changes in our internal control over financial reporting (as that term is defined in Rules 13a-15(f) or 15d-15(f) under the Exchange Act) during the quarter ended September 30, 2015 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 

 
25

 

 

PART II

OTHER INFORMATION

Item 1 – Legal Proceedings

 

There have been no significant developments with respect to legal proceedings specifically affecting Liquidmetal Technologies Inc. or its subsidiaries since the filing of the 2014 Annual Report.

 

Item 1A – Risk Factors

 

For a detailed discussion of the risk factors that should be understood by any investor contemplating an investment in our stock, please refer to Part I, Item 1A “Risk Factors” in the 2014 Annual Report. There have been no material changes from the risk factors previously disclosed in Part I, “Item 1A Risk Factors” in the 2014 Annual Report.

 

Item 2 – Unregistered Sales of Equity Securities and Use of Proceeds

 

During the period covered by this Quarterly Report on Form 10-Q, we did not issue or sell any unregistered equity securities.

 

Item 3 – Defaults Upon Senior Securities

 

None.

 

Item 4 – Mine Safety Disclosures

 

None.

 

Item 5 – Other Information

 

None.

 

 
26

 

 

Item 6 – Exhibits

 

The following documents are filed as exhibits to this Report:

 

Exhibit

Number

  Description of Document
     

3.1

 

Amended and Restated Bylaws of Liquidmetal Technologies, Inc. (incorporated by reference to Exhibit 3.1 to the Form 8-K filed on October 5, 2015).

     

10.1

 

Confidential Separation Agreement and Release of Claims, dated August 21, 2015, between Liquidmetal Technologies, Inc. and Ricardo Salas (incorporated by reference to Exhibit 10.1 to the Form 8-K filed on August 25, 2015).

     

10.2

 

Form of Director and Officer Indemnification Agreement (incorporated by reference to Exhibit 10.1 to the Form 8-K filed on October 5, 2015).

     

10.3

 

Form of Amended and Restated Director and Officer Indemnification Agreement (incorporated by reference to Exhibit 10.2 to the Form 8-K filed on October 5, 2015).

     

31.1

 

Certification of Principal Executive Officer, Thomas Steipp, as required by Section 302 of the Sarbanes-Oxley Act of 2002

     

31.2

 

Certification of Principal Financial Officer, Tony Chung, as required by Section 302 of the Sarbanes-Oxley Act of 2002

     

32.1

 

Certification of Chief Executive Officer, Thomas Steipp, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

     

32.2

 

Certification of Chief Financial Officer, Tony Chung, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

     

101.1

 

The following financial statements from Liquidmetal Technologies, Inc.’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2015 (unaudited), formatted in XBRL: (i) Consolidated Balance Sheets as of September 30, 2015 and December 31, 2014, (ii) Consolidated Statements of Operations and Comprehensive Loss for the three and nine months ended September 30, 2015 and 2014, (iii) Consolidated Statement of Stockholders’ Equity for the nine months ended September 30, 2015, (iv) Consolidated Statements of Cash Flows for the nine months ended September 30, 2015 and 2014, and (v) Notes to Consolidated Financial Statements.

 

 

 
27

 

 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

 

 

LIQUIDMETAL TECHNOLOGIES, INC.

 

 

(Registrant)

 

 

 

 

Date: November 9, 2015

/s/ Thomas Steipp

 

 

Thomas Steipp

 

 

President and Chief Executive Officer

 

 

(Principal Executive Officer)

 

 

 

 

 

 

 

Date: November 9, 2015

/s/ Tony Chung

 

 

Tony Chung

 

 

Chief Financial Officer

 

 

(Principal Financial and Accounting Officer)

 

 

 

28