MACOM Technology Solutions Holdings, Inc. - Annual Report: 2014 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

For the fiscal year ended October 3, 2014

OR

For the transition period from                     to                    

Commission file number: 001-35451

M/A-COM Technology Solutions Holdings, Inc.

(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code: (978) 656-2500

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.    ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

The aggregate market value of the registrant’s common stock held by non-affiliates of the registrant as of April 4, 2014, the last business day of the registrant’s second fiscal quarter, was approximately $410.2 million based on the closing price of the registrant’s common stock as of such date as reported on the NASDAQ Global Select Market. For purposes of the foregoing calculations only, shares of common stock held by each executive officer and director of the registrant and their respective affiliates have been excluded, as such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

The number of outstanding shares of the registrant’s common stock, par value $0.001 per share, as of November 15, 2014 was 47,604,204.

DOCUMENTS INCORPORATED BY REFERENCE

Part III incorporates certain information by reference from the registrant’s definitive proxy statement for the 2015 Annual Meeting of Stockholders, which will be filed no later than 120 days after the close of the registrant’s fiscal year ended October 3, 2014.

Table of Contents

M/A-COM TECHNOLOGY SOLUTIONS HOLDINGS, INC.

ANNUAL REPORT ON FORM 10-K

FOR THE FISCAL YEAR ENDED OCTOBER 3, 2014

TABLE OF CONTENTS

2

Table of Contents

CAUTIONARY STATEMENT

This Annual Report on Form 10-K (Annual Report) contains forward-looking statements within the meaning of Section 21E of the Securities and Exchange Act of 1934, as amended, including statements regarding our business outlook, strategy, plans, expectations, estimates and objectives for future operations, and our future results of operations and financial position. Forward-looking statements include all statements that are not historical facts and generally may be identified by terms such as “anticipates,” “believes,” “could,” “continue,” “estimates,” “expects,” “intends,” “may,” “plans,” “potential,” “predicts,” “projects,” “seeks,” “should,” “targets,” “will,” “would,” or similar expressions or variations or the negatives of those terms, but are not the exclusive means of identifying forward-looking statements in this Annual Report.

Although forward-looking statements in this Annual Report reflect the good faith judgment of our management based on what we know at the time they are made, such statements involve inherent risks and uncertainties and actual results and outcomes may differ materially and adversely from the results and outcomes expressed or implied by our forward-looking statements. A number of important factors could cause actual results to differ materially and adversely from those in the forward-looking statements. We urge you to consider the risks and uncertainties in Item 1A. “Risk Factors” and elsewhere in this Annual Report and the other documents filed by us with the Securities and Exchange Commission (SEC). Except as required by law, we have no plans, and undertake no obligation, to revise or update our forward-looking statements to reflect any event or circumstance that may arise after the date of this report. We caution readers not to place undue reliance upon any such forward-looking statements, which speak only as of the date made.

In this document, the words “Company,” “we,” “our,” “us,” and similar terms refer only to M/A-COM Technology Solutions Holdings, Inc. and its consolidated subsidiaries, and not any other person or entity.

“M/A-COM” and “MACOM” are trademarks of M/A-COM Technology Solutions Holdings, Inc. All other brands and names listed are trademarks of their respective owners.

3

Table of Contents

PART l

ITEM 1. BUSINESS

Overview

We are a leading provider of high-performance analog semiconductor solutions that enable next-generation internet applications, the cloud connected apps economy, and the modern, networked battlefield across the radio frequency (RF), microwave and millimeterwave spectrum. We design and manufacture differentiated, high-value products for customers who demand high performance, quality and reliability. We offer a broad portfolio of over 3,500 standard and custom devices, which include integrated circuits (IC), multi-chip modules, power pallets and transistors, diodes, switches and switch limiters, passive and active components and complete subsystems, across 42 product lines serving over 6,000 end customers in four primary markets. Our semiconductor products are electronic components that our customers incorporate into their larger electronic systems, such as point-to-point wireless backhaul radios, optical networking equipment, high density data networks, radar, automobile navigation systems, magnetic resonance imaging systems and unmanned aerial vehicles. Our primary markets are: Networks, which includes wired broadband, cellular backhaul, cellular infrastructure, enterprise networking, broadcast video transmission and optical communications applications; Aerospace and Defense (A&D), which includes military and commercial radar, RF jammers, electronic countermeasures and communication data links; Automotive, which includes global positioning (GPS) modules we sell to Ford and Ford affiliates; and Multi-market, which includes industrial, medical, test and scientific applications.

We build upon a 60-year heritage of delivering innovative solutions dating back to the founding of Microwave Associates, Inc. We utilize our system-level knowledge and our extensive capabilities in high-frequency modeling, IC design, integration, manufacturing and packaging of semiconductors to address our customers’ needs. Our specialized engineers and technologists located across eleven global design centers collaborate with our customers during the early stage of their system development process to incorporate our standard products and identify custom products we can develop to enhance their overall system performance. We intend to continue to expand our revenue opportunities through our market-facing strategy of aligning our solutions with our customers’ needs and collaborating with them during the product definition stage of their systems toward design-in of our products. We believe this approach will allow us to sell more complete semiconductor solutions that integrate more functions and incorporate more highly-valued content into our products. We believe the combination of our market-facing strategy and our engineering expertise enables us to identify profitable growth opportunities and rapidly develop and deliver new products and solutions. Many of our products have long lifecycles ranging from five to ten years, and some of our products have been shipping for over 20 years. We believe these factors create a competitive advantage. Our goal is to strengthen customer relationships and capture design wins, where a customer allows us to be a supplier of a particular component used in its system.

We believe our “fab-lite” manufacturing model provides us with a competitive advantage and an attractive financial model through a largely variable cost structure. We operate a Gallium Arsenide (GaAs) and silicon semiconductor fab at our Lowell, Massachusetts headquarters, and we are currently in the process of adding Gallium Nitride (GaN) fabrication capacity at that site as well. In the A&D market, a domestic fab can be a requirement to be a strategic supplier, and we believe our status as a “Trusted Foundry” offers us further competitive differentiation.

We also utilize external semiconductor foundries to supply us with additional capacity, lower costs, and to provide us access to additional process technologies. The ability to utilize a broad array of internal proprietary process technologies as well as commercially available foundry technologies allows us to select the most appropriate technology to solve our customers’ needs. We believe our fab-lite strategy also provides us with dependable domestic supply, control over quality, reduced capital investment requirements, faster time to market, and additional outsourced capacity when needed. In addition, the experience base cultivated through the continued operation of our internal fab provides us with the expertise to better manage our external foundry suppliers.

4

Table of Contents

We serve our broad and diverse customer base through a multi-channel sales strategy utilizing our direct sales force, a global network of independent sales representatives, distributors and an e-commerce channel. Our direct sales force and application engineers are focused on securing design wins by supporting industry-leading original equipment manufacturer (OEM) customers. Our external sales representatives, distributors and our e-commerce channel, are focused on increasing our design wins with smaller or emerging customers early in their new product development efforts.

Our Markets & Products

The growth of advanced electronic systems using analog RF, microwave and millimeterwave technologies has created demand for high-performance analog semiconductor components, modules and solutions. The terms RF, microwave and millimeterwave are used to refer to electromagnetic waves in a particular frequency range produced by applying an alternating current to an antenna or conductor. A wide variety of advanced electronic systems rely on electromagnetic waves for high-speed data transmission or reception. We offer high-performance analog semiconductor products for both wireless and wireline applications across the frequency spectrum from RF to millimeterwave. We regularly develop high-value products to serve our customers in four primary markets: Networks, A&D, Automotive and Multi-market, which represented 43.8%, 20.9%, 19.3% and 16.0%, respectively, of our revenue in fiscal year 2014.

The market demand for analog RF, microwave and millimeterwave semiconductors is driven by the growth of mobile internet devices, cloud computing and streaming video that strain existing network capacity, as well as the growth in advanced information-centric military applications. In addition, the increasing need for real-time information, sensing and imaging functions in automotive, industrial, medical, scientific and test and measurement applications is driving demand for our products.

Networks. Growth in the Networks market is driven by the proliferation of wireless and wired devices from smartphones and tablets to data centers, as well as the data rich applications and services they enable such as mobile internet, cloud computing, video-on-demand, social media, global positioning functionality and location based services. Growth in global next-generation internet and internet of things (IoT) drives demand for communications infrastructure equipment requiring amplifiers, filters, receivers, switches, synthesizers, transformers, upconverters and other components to expand and upgrade cellular backhaul, cellular infrastructure, wired broadband and fiber optic networks. Semiconductor products and solutions must continually deliver greater bandwidth and functionality as the demands of our customers and end users increase.

Our expertise in system-level architectures and advanced IC design capability allow us to offer Networks OEMs highly-integrated solutions optimized for performance and cost. We are a leader in high-frequency semiconductors used in point-to-point radios for cellular backhaul, where we provide a highly-integrated chipset solution featuring innovative IC and low cost package design capabilities. Similarly, our portfolio of opto-electronics products for clock and data recovery, optical post amplifiers, laser and modulator drivers, transimpedence amplifiers, transmitter and receiver applications in 2.5/6/10/40/100 gigabit per second (Gbps) long haul, metro and fiber-to-the-home (FTTx) fiber optic networks enable telecommunications carriers and data centers to cost-efficiently increase their network capacity by a factor of four to ten times over earlier generation solutions. For optical communications applications, we utilize a proprietary combination of GaAs, Indium Phosphide (InP) and Silicon Germanium (SiGe) technologies to obtain advantages in performance and size. For wired broadband applications, we offer OEMs the opportunity to streamline their supply chain through our broad catalog of active components such as active splitters, amplifiers, multi-function ICs and switches, as well as passive components such as transformers, diplexers, filters, power dividers and combiners.

Aerospace & Defense. In the A&D market, military applications require more advanced electronic systems, such as radar warning receivers, communications data links and tactical radios, unmanned aerial vehicles (UAVs), RF jammers, electronic countermeasures and smart munitions. Military applications are becoming more sophisticated, favoring higher performance semiconductor ICs based on GaAs and GaN technologies due to their high power density, improved power efficiency and broadband capability. Radar systems for mapping and

5

Table of Contents

targeting missions are undergoing a major transition from existing mechanically-scanned radar products to a next-generation of active electronically-scanned array (AESA) based products. Consisting of hundreds or thousands of transmit/receive modules commonly based on GaAs and GaN technologies, AESAs deliver greater speed, range, resolution and reliability over mechanically-scanned radar products that utilize a single transmitter and receiver with mechanical steering. Military communications employing wireless infrastructure and tactical radios in the field remain critical for allowing geographically dispersed operators to exchange information quickly and efficiently. UAVs and their underlying semiconductor content require innovative designs to meet rigorous specifications for high performance, small size and low power consumption.

We believe our in-depth knowledge of critical radar system requirements, integration expertise and track record of reliability make us a valued resource for our A&D customers faced with demanding application parameters. Further, we have been accredited by the United States Department of Defense with “Trusted Foundry” status, a designation conferred on microelectronics vendors exhibiting the highest levels of process integrity and protection, which we believe differentiates us as a trusted manufacturer of ICs for U.S. military and aerospace applications. For radar applications, we offer standard and custom power transistor pallets, discrete components, switch limiters, phase shifters and integrated modules for transmit and receive functions in air traffic control, marine, weather and military radar applications. For military communications data link and tactical radio applications, we offer a family of active, passive and discrete products, such as integrated IC modules, control components, voltage-controlled oscillators (VCOs), transformers, power transistors and pallets and diodes. In some cases, we design parts specifically for these applications, while in others, our reputation for quality and broad catalog allows these demanding customers to reduce the cost of their high-performance systems by designing in standard dual-use or commercial off-the-shelf parts that we have developed for other applications. We believe manufacturing many of these products in our Lowell, Massachusetts “Trusted Foundry” fab offers us a competitive advantage in the A&D market because of our proprietary process technologies and certain A&D customers’ requirements for a domestic supply chain.

Automotive. Demand for our products targeting the Automotive market is largely driven by the need for real-time access to information to support driver information, active safety and efficiency applications in vehicles which automotive OEMs have begun adopting in their vehicle designs to comply with government fuel efficiency and emission reduction requirements, increase safety, and deliver an improved driving experience to the consumer. Advanced driver assistance systems (ADAS) such as telematics, active cruise control, vision systems, collision avoidance and hybrid energy management systems each require highly accurate location information, time and other data as inputs to complex control systems and algorithms, as well as connectivity to global data infrastructure.

Through RF reception, signal processing, and systems engineering, we deliver stand-alone, networked embedded modules. Our automotive module products include RF reception, signal processing and other functionality enabling the delivery of the required location, time, and predictive horizon data to these ADAS system applications. Our distributed architecture approach allows multiple control systems across the vehicle (e.g. telematics, powertrain, safety) to leverage a single sensor, resulting in lower system cost and quicker time to market with next generation technologies for OEMs.

Multi-market. Multi-market encompasses industrial, medical, test and measurement and scientific applications, where analog RF, microwave and millimeterwave semiconductor solutions are gaining prevalence. In addition, evolving medical technology has increased the need for high-performance semiconductor solutions in medical imaging and patient monitoring to provide enhanced analysis and functionality.

In Multi-market, our products are used in industrial, medical, test and measurement and scientific applications. In the medical industry, our custom designed non-magnetic diode product line is a critical component for certain MRI applications. For sensing and test and measurement applications, we believe our patented heterolithic microwave integrated circuit (HMIC) process is ideal for high-performance, integrated bias networks and switches. Our catalog of general purpose GaAs ICs includes low noise amplifiers, switches and power amplifiers that address a wide range of applications such as industrial automation systems to test and measurement equipment.

6

Table of Contents

To address our target markets, we offer a broad range of standard and custom ICs, modules and complete subsystems across 42 product lines. Our product catalog currently consists of more than 3,500 products including the following key product platforms: power pallets and transistors, ICs, diodes, switches and switch limiters, passive and active components, multi-chip modules and complete subsystems. Many of our product platforms are leveraged across multiple markets and applications. For example, our application expertise with regard to power transistor technology is leveraged across both scientific laboratory equipment applications and commercial and defense radar system applications. Our diode technology is used in switch filter banks of military tactical radios as well as medical imaging systems. The table below presents the major product families and major applications in our primary target markets.

7

Table of Contents

We believe the combination of our market-facing strategy and our engineering expertise enables us to identify profitable growth opportunities and rapidly develop and deliver new products and solutions. Many of our products have long lifecycles ranging from five to ten years, and some of our products have been shipping for over 20 years. Our goal is to strengthen customer relationships and capture design wins, where a customer allows us to be a supplier of a particular component used in its system.

Research and Development

Our research and development efforts are directed toward the rapid development of new and innovative products and solutions, process technologies and packaging techniques. The interaction of semiconductor process technology, circuit design technology and packaging technology defines the performance parameters and the customers’ acceptance of our products. We believe our core competency is the ability to model, design, integrate, manufacture and package differentiated solutions. We leverage this core competency to solve difficult and complex challenges that our customers face during their system design phases. We believe our integrated and customized solutions offer customers high performance, quality, reliability and faster time to market.

Circuit design and device modeling expertise. Our engineers are experts in the design of circuits capable of reliable, high-performance analog RF, microwave and millimeterwave signal conditioning. Our staff has decades of experience in solving complex design challenges in applications involving high frequency, high power, and environmentally-rugged operating conditions. We also develop proprietary device and electro-magnetic modeling techniques that our engineers use to generate predictive models prior to fabrication. Our predictive modeling expertise allows us to achieve faster design cycle times resulting in shorter time to market for our products.

Packaging expertise. Our extensive packaging expertise enables us to model the interaction between the semiconductor and its package. Our engineers make adjustments in the design of both the semiconductor and the package, to take account of that interaction. We offer products in a variety of different package types for specific applications, including plastic over-molded, ceramic and laminate-based.

Semiconductor process technology. We leverage our domestic semiconductor wafer fabrication capabilities and our foundry suppliers to offer customers the right process technology to meet their particular requirements. Depending on the requirements for the application, our semiconductor products may be designed using an internally developed or externally sourced process technology.

We continue to invest in proprietary processes to enable us to develop and manufacture high-value solutions. For example, we have developed innovative, patented technologies such as HMIC, which provides high integration, high power and low loss switching capabilities for our primary markets. This technology replaces mechanical switches for very high power applications such as wireless basestations. We are also in the process of transferring from an external foundry supplier an innovative, high-performance GaN process technology manufacturing capability to our Lowell, Massachusetts fabrication facility. Upon completion of the transfer and qualification process, we believe that being able to offer our customers this dual-sourced, internal and external GaN supply capability will provide us with a competitive advantage.

Our engineers’ system-level design expertise allows us to offer differentiated solutions that leverage multiple process technologies and are integrated into a single, higher-level assembly, thereby delivering our customers enhanced functionality.

Research and development expenses were $73.7 million, $44.6 million and $36.8 million for fiscal years 2014, 2013 and 2012, respectively. We anticipate that we will continue to make significant research and development expenditures in order to drive future new product and process introductions and maintain our competitive position.

8

Table of Contents

Sales and Marketing

We employ a global multi-channel sales strategy and support model intended to facilitate our customers’ evaluations and selections of our products. We sell through our direct sales force, our application engineering staff and our global network of independent sales representatives, resellers and distributors, as well as an e-commerce channel. We have strategically positioned our direct sales and applications engineering staff in 32 locations worldwide, augmented by independent sales representatives and distributors with additional domestic and foreign locations to offer responsive local support resources to our customers and to build long-term relationships. From our global design centers, our application engineers visit customers at their engineering and manufacturing facilities, aid them in understanding our capabilities, and collaborate with them to deliver products that can optimize their system performance. Our global independent sales representatives and distributor network allows us to extend our sales capabilities to new customers in new geographies more cost effectively than we can using our direct sales force alone.

Our products are principally sold in the U.S., Asia and Europe, which is where we concentrate our direct sales force, engineering staff, independent sales representatives, and distributors. Sales to our distributors accounted for 22.5%, 18.4% and 21.3% of our revenue in fiscal years 2014, 2013 and 2012, respectively. Our agreements with sales representatives, resellers and distributors may provide for an initial term of one or more years with the opportunity for subsequent renewals or for an indefinite term, and also typically provide that either party may terminate the agreement for convenience with a minimum period of prior notice to the other party, typically between 30 and 90 days.

Our sales efforts are focused on customers’ needs in our four primary markets rather than on particular product lines, facilitating product cross-selling across end markets and within key accounts. Through our website, customers can order online, request samples, as well as access our product selection guides, detailed product brochures and data sheets, application notes, suggested design block diagrams and test fixture information, technical articles and information regarding quality and reliability.

Customers

Our diversified base of over 6,000 end customers includes original equipment manufacturers (OEMs), contract manufacturers and distributors. For fiscal years 2014, 2013 and 2012, one direct customer individually accounted for more than 10% of our revenue, Ford Motor Company (Ford) at 19.0%, 24.8% and 15.7%, respectively. In addition, our principal distributor, Richardson Electronics, an Arrow Electronics Company (Richardson), accounted for 15.0%, 15.6% and 17.5% of our revenue in fiscal years 2014, 2013 and 2012, respectively. Our top 25 direct customers accounted for an aggregate of 56.5%, 59.0% and 54.0% of our revenue in fiscal years 2014, 2013 and 2012, respectively. Revenue from our distributors accounted for an aggregate of 22.5%, 18.4% and 21.3% of our revenue in fiscal years 2014, 2013 and 2012 respectively.

Competition

The markets for our products are highly competitive and are characterized by rapid technological change and continuously evolving customer requirements. We believe that the principal competitive factors in our markets include:

9

Table of Contents

We believe that we compete favorably with respect to these factors. We compete primarily with other suppliers of high-performance analog semiconductor solutions for use in wireless and wireline RF, microwave and millimeterwave applications, some of whom have greater financial resources and scale than us. We expect competition in our markets to intensify, as new competitors enter the RF, microwave and millimeterwave markets, existing competitors merge or form alliances, and new technologies emerge. We believe in the future there will be increased competition from companies utilizing alternative technologies, such as high-volume manufacturers using low-cost silicon process technology. Some of our competitors are also our customers, and in certain product categories we compete with semiconductor manufacturers from which we also obtain foundry services, including Sumitomo Electric Device Innovations, Inc. and RF Micro Devices, Inc. (RFMD).

We compete with Analog Devices, Inc. (ADI) across three of our primary markets, Networks, A&D and Multi-market. In the Networks market, we also compete with Avago Technologies Limited (Avago), RFMD, TriQuint Semiconductor, Inc. (Triquint) and SEMtech Corporation. In the A&D market, we also compete with Cobham Defense Electronic Systems (Cobham), Microsemi Corporation (Microsemi) and TriQuint. In the Multi-market arena, we also compete with Cobham, Avago, Microsemi and Skyworks Solutions, Inc (Skyworks).

Segment and Geographic Information

We manage our operations in one reportable segment, semiconductors and modules. Financial information about our operations, including our revenue and long-lived assets by geographic region, is included in our consolidated financial statements and accompanying notes in Item 8. “Financial Statements and Supplementary Data” appearing elsewhere in this Annual Report.

Risks attendant to our foreign operations are discussed in this Annual Report under Item 1A. “Risk Factors.”

Backlog and Inventory

Our sales are made primarily on a purchase order basis, rather than pursuant to long-term contracts where the customer commits to buy any minimum amount of product over an extended period. On occasion, we ship finished goods inventory to certain customer or third-party “hub” locations, but do not recognize revenue associated with such shipments until these customers consume the inventory from the hub. We also frequently ship products from inventory shortly after receipt of an order, which we refer to as “turns business”. Due to these arrangements and industry practice, which allows customers to cancel orders with limited advance notice prior to shipment, and with little or no penalty, we believe that backlog as of any particular date may not be a reliable indicator of our future revenue levels.

Intellectual Property

Our success depends in part upon our ability to protect our intellectual property. To accomplish this, we rely on a combination of intellectual property rights, including patents, copyrights, trademarks and trade secrets, as well as customary contractual protections with our customers, suppliers, employees and consultants.

As of October 3, 2014, we had 380 U.S. and 118 foreign patents and 45 U.S. and 25 foreign pending patent applications covering elements of circuit design, manufacturing and wafer fabrication. We do not know whether any of our pending patent applications will result in the issuance of patents or whether the examination process will require us to narrow our claims. The expiration dates of our patents range from 2014 to 2032. We do not regard any of the patents scheduled to expire in the next 12 months as material to our overall intellectual property portfolio. Notwithstanding our active pursuit of patent protection when available, we believe that our future success will be determined by the innovation, technical expertise and management abilities of our engineers and management more than by patent ownership.

The semiconductor industry is characterized by the existence of a large number of patents, copyrights, trademarks and trade secrets, and by the vigorous pursuit, protection and enforcement of intellectual property rights. Many of our customer agreements require us to indemnify our customers for third-party intellectual

10

Table of Contents

property infringement claims, which may in the future require that we defend those claims and might require that we pay damages in the case of adverse rulings. Claims of this sort could harm our relationships with our customers and might deter future customers from doing business with us. With respect to any intellectual property rights claims against us or our customers or distributors, we may be required to cease manufacture of the infringing product, pay damages or settlement amounts, expend resources to develop non-infringing technology, seek a license, which may not be available on commercially reasonable terms or at all, or relinquish patents or other intellectual property rights.

Manufacturing, Sources of Supply and Raw Materials

In any particular situation, we may choose to leverage our internal proprietary process technologies or other technologies from external fabs. We believe this ability to leverage our existing internal capabilities and external outsourcing helps us to provide optimized solutions for our customers.

All of our internal wafer fabrication, and a majority of our internal assembly and test operations, are conducted at our Lowell, Massachusetts headquarters. We believe having a U.S.-based wafer fab is a competitive advantage for us over fabless competitors, in that we have greater control over quality, a secure source of supply, and a domestic source for U.S. A&D customers. We also believe that our domestic fab allows us to better manage quality control and develop products faster with shorter fabrication lead times than we otherwise could at external foundries. We also perform internal assembly and test functions at our Long Beach, California, Nashua, New Hampshire and Hsinchu, Taiwan, locations.

We complement our internal manufacturing with outsourced foundry partners and other supply chain suppliers. Our operations staff has extensive expertise in the management of outsourced manufacturing service providers and other supply chain participants. We believe our fab-lite model of outsourcing certain of our manufacturing activities rather than investing heavily in capital-intensive production facilities, provides us with the flexibility to respond to new market opportunities, simplifies our operations, provides access to other process technologies and additional manufacturing capacity and reduces our capital requirements. We also use third-party contract manufacturers for assembly, packaging and test functions and in some cases for fully-outsourced turnkey manufacturing of our products.

The principal materials used in the production of our IC products are high purity source materials such as gallium, aluminum, arsenic, nitrite, carbon and silicon. We purchase from hundreds of suppliers worldwide, a wide variety of semiconductors, wafers, packages, metals, printed circuit boards, electromechanical components and other materials for use in our operations. These supply relationships are generally conducted on a purchase order basis. The use of external suppliers involves a number of risks, including the possibility of material disruptions in the supply of key raw materials and components, the lack of control over delivery schedules, capacity, quality and costs.

While we attempt to maintain alternative sources for our principal raw materials to reduce the risk of supply interruptions or price increases, some of the raw materials and components are not readily available from alternate suppliers due to their unique nature, design or the length of time necessary for re-design or qualification. We routinely utilize single sources of supply for various materials based on availability, performance, efficiency or cost considerations. For example, wafers procured from merchant foundries for a particular process technology are generally sourced through a single foundry, on which we rely for all of our wafers in that process. Our reliance on external suppliers puts us at risk of supply chain disruption, if the supplier does not have sufficient raw material inventory to meet our manufacturing needs, goes out of business, changes or discontinues the process in which components or wafers are manufactured, or declines to continue supplying us for competitive or other reasons, as discussed in more detail in Item 1A. “Risk Factors” herein. Where practical, we attempt to mitigate these risks by qualifying multiple sources of supply, redesigning products for alternative components and purchasing incremental inventory of raw materials and components in order to protect us against supply disruptions.

11

Table of Contents

Quality Assurance

The goal of our quality assurance program is for our products to meet our customers’ requirements, be delivered on time and function reliably throughout their useful lives. The International Organization for Standards (ISO) provides models for quality assurance for various operational disciplines, such as design, manufacturing, and testing, which comprise part of our overall quality management system. Our Lowell, Massachusetts, Long Beach, Santa Clara and Newport Beach, California, Morrisville, North Carolina, Nashua, New Hampshire, Belfast, Northern Ireland, Cork, Ireland, Sydney, Australia and Hsinchu, Taiwan locations have each received ISO 9001:2008 certifications in one or more of their principal functional areas. In addition, our Lowell facility has received an ISO 14001:2004 environmental management systems certification.

Environmental Regulation

Our operations involve the use of hazardous substances and are regulated under federal, state, and local laws governing health and safety and the environment in the U.S. and other countries. These regulations include limitations on discharge of pollutants into the air, water and soil, remediation requirements, product chemical content limitations, manufacturing chemical use and handling restrictions, pollution control requirements, waste minimization considerations, and requirements regarding the treatment, transport, storage and disposal of hazardous wastes. We are also subject to regulation by the U.S. Occupational Safety and Health Administration and similar health and safety laws in other jurisdictions. While we are committed to compliance with applicable regulations, the risk of environmental liabilities can never be completely eliminated, and there can be no assurance that the application of environmental and health and safety laws to our business will not require us to incur material future expenditures.

We are also regulated under a number of federal, state and local laws regarding responsible sourcing, recycling, product packaging and product content requirements in the U.S. and other countries, including legislation enacted in the European Union and other foreign jurisdictions that have placed greater restrictions on the use of lead, among other chemicals, in electronic products, which affects materials composition and semiconductor packaging. These laws are becoming more stringent and may in the future cause us to incur material expenditures or otherwise cause financial harm.

Export Regulations

We market and sell our products both inside and outside the U.S. Certain products are subject to the Export Administration Regulations, administered by the Department of Commerce, Bureau of Industry Security, which require that we obtain an export license before we can export certain controlled products or technology to specified countries. Additionally, some of our products are subject to the International Traffic in Arms Regulations, which restrict the export of information and material that may be used for military or intelligence applications by a foreign person. Similar controls exist in other jurisdictions. Failure to comply with these laws could result in sanctions by the government, including substantial monetary penalties, denial of export privileges, and debarment from government contracts. We maintain an export compliance program staffed by dedicated personnel under which we screen export transactions against current lists of restricted exports, destinations, and end users with the objective of managing export-related decisions, transactions and shipping logistics to ensure compliance with these requirements.

Employees

As of October 3, 2014, we employed 918 persons worldwide and none of our domestic employees were represented by a collective bargaining agreement; however, a number of our employees working in our European operations were covered by collective bargaining agreements. We consider our relations with employees to be good, and we have not experienced a work stoppage due to labor issues.

12

Table of Contents

General Development

We were incorporated under the laws of the State of Delaware in March 2009. Our operations are conducted through our various subsidiaries, which are organized and operated according to the laws of their respective jurisdictions of incorporation.

M/A-COM Technology Solutions Inc., our primary operating subsidiary, which provides high-performance analog semiconductor solutions for use in wireless and wireline applications across the RF, microwave, and millimeterwave spectrum, was incorporated under the laws of the state of Delaware on July 16, 2008. M/ACOM Technology Solutions (Cork) Limited, our primary foreign operating subsidiary, was incorporated under the laws of Ireland on November 18, 2008. In September 2008, Cobham acquired certain assets from a third party, including the RF and microwave component and subsystem design and business operations that would ultimately become the operations of M/A-COM Technology Solutions Inc. and M/ACOM Technology Solutions (Cork) Limited. The heritage of some of these business operations dates back over 60 years to the founding of Microwave Associates, Inc. and the M/A-COM brand dates back over 30 years.

On March 30, 2009, we acquired 100% of the outstanding stock of M/A-COM Technology Solutions Inc. and M/ACOM Technology Solutions (Cork) Limited and the related M/A-COM brand from Cobham (MACOM Acquisition) for $22.1 million in cash net of purchase price adjustments, the issuance of $35.0 million in short- and long-term debt payable to the seller and contingent consideration of approximately $30.0 million based on our achievement of revenue targets in the 12-month periods ended September 30, 2010, 2011 and 2012.

On May 28, 2010, we acquired Mimix Holdings, Inc. (Mimix), a supplier of high-performance GaAs semiconductors, for $1.2 million in cash and 17.5 million shares of our Series A-2 convertible preferred stock (Mimix Merger). We acquired Mimix for its complementary products and technologies in our core markets, which enabled us to strengthen customer relationships.

On April 25, 2011, we acquired Optomai, Inc. (Optomai), a fabless semiconductor company that develops high-performance ICs and modules for next generation fiber optic networks, for $1.8 million in cash and potential contingent consideration based on our achievement of certain revenue, product release and contribution margin targets based on sales of products utilizing Optomai intellectual property through, as amended, September 2013. No amounts of contingent consideration have been paid nor are payable pursuant to the terms of the agreement. We acquired Optomai for technologies that accelerated our entrance into the fiber optics market.

On December 18, 2013, we acquired Mindspeed Technologies, Inc. (Mindspeed), a supplier of semiconductor solutions for communications infrastructure applications (Mindspeed Acquisition). We acquired Mindspeed to further our expansion into high-performance analog products. We funded the acquisition through the use of available cash and borrowings under our revolving credit facility (see Note 8 of our Notes to Consolidated Financial Statements). The aggregate purchase price paid by us in the Mindspeed Acquisition, net of cash acquired, was $232.0 million and we assumed $81.3 million of liabilities and incurred costs of $4.5 million expensed in fiscal year 2014. The Mindspeed Acquisition was accounted for as a purchase and the operations of Mindspeed have been included in our consolidated financial statements since December 18, 2013, the date of acquisition.

Subsequent to closing the Mindspeed Acquisition, in February 2014, we divested the wireless business of Mindspeed. The operations of the wireless business are included in discontinued operations. In May 2014, we divested the customer premise equipment communication processor (CPE) product line we acquired in the Mindspeed Acquisition. The operations of the CPE product line are included in the results of operations through the date of the sale.

On February 13, 2014, we completed the acquisition of Nitronex, LLC (Nitronex Acquisition). Nitronex designs, develops, manufactures and markets GaN semiconductors and holds an exclusive license to fundamental

13

Table of Contents

GaN patents in the RF field of use. We completed the Nitronex Acquisition through a cash payment of $26.1 million for all of the outstanding membership interests of Nitronex. We funded the Nitronex Acquisition through the use of available cash and borrowings under our revolving credit facility.

We acquired Nitronex from a party under common control with MACOM, and as a result we have accounted for the Nitronex Acquisition as a pooling of interest from the date of acquisition by the common control party in June 2012. The original acquisition of Nitronex by the common control party was accounted for as a purchase. The financial statements of MACOM have been retroactively combined to include the results of operations of Nitronex from June 2012.

On November 17, 2014, we entered into an Agreement and Plan of Merger to acquire BinOptics Corporation (BinOptics Acquisition). The aggregate consideration payable for BinOptics will be approximately $230 million, subject to adjustment based on customary post-closing purchase price adjustment provisions and indemnification obligations of BinOptics equityholders after the closing of the BinOptics Acquisition. We currently expect the acquisition to close prior to the end of calendar 2014. See the risk factor titled “We may be unable to close the BinOptics Acquisition or successfully integrate the business and personnel of BinOptics, and may not realize the anticipated synergies and benefits of the BinOptics Acquisition.” in Item 1A. “Risk Factors” in this Annual Report.

We intend to continue to pursue acquisitions of technologies, design teams, products and companies that complement our strengths and help us execute our strategies. Our acquisition strategy is designed to accelerate our revenue growth, expand our technology portfolio, grow our addressable market, and create shareholder value. We believe our management team has a proven track record in identifying, acquiring and successfully integrating companies and technologies in the high-performance analog semiconductor industry.

Available Information

We maintain a website at www.macom.com, including an investors section at which we routinely post important information, such as webcasts of quarterly earnings calls and other investor events in which we participate or host, and any related materials. You may access our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports, as well as other reports relating to us that are filed with or furnished to the SEC, free of charge in the investors section of our website as soon as reasonably practicable after such material is electronically filed with or furnished to the SEC. The public may also read and copy materials we file with the SEC at the SEC’s Public Reference Room, which is located at 100 F Street, NE, Room 1580, Washington, DC 20549. You can obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC also maintains a website that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC at www.sec.gov. The contents of the websites mentioned above are not incorporated into and should not be considered a part of this Annual Report.

14

Table of Contents

ITEM 1A. RISK FACTORS

Our business involves a high degree of risk. If any of the following risks actually occurs, our business, financial condition or results of operations could suffer. The risks described below are not the only ones facing us. Additional risks not presently known to us or that we currently consider immaterial also may adversely affect our Company.

Risks Relating to Our Business

Our revenue growth is substantially dependent on our successful development and release of new products.

Maintaining or growing our revenue will depend on our ability to timely develop new products for existing and new markets that meet customers’ performance, reliability and price requirements. The development of new products is a highly complex process, and we have in the past and may in the future experience delays and failures in completing the development and introduction of new products. Our successful product development depends on a number of factors, including the following:

A new product design effort may last 12 to 18 months or longer, and requires significant investments in engineering hours and materials, as well as sales and marketing expenses, which will not be recouped if the product launch is unsuccessful. We may not be able to design and introduce new products in a timely or cost-efficient manner, and our new products may fail to meet the requirements of the market or our customers, or may be adopted by customers slower than we expect. In that case, we may not reach our expected level of production orders and may lose market share, which could adversely affect our ability to sustain our revenue growth or maintain our current revenue levels.

Various factors may reduce our gross margin, which could negatively affect our business, financial condition and results of operations.

If we are unable to utilize our design, fabrication, assembly and test facilities at a high level, the significant fixed costs associated with these facilities may not be fully absorbed, resulting in higher average unit costs and lower gross margin. Our various products have different gross margin and increased sales of lower-margin products, such as our products targeted at automotive and other consumer markets, in a given period relative to sales of higher-margin products such as our optical products, may cause us to report lower overall gross margin. In our fourth quarter of fiscal year 2012 and at other times in the past, we have experienced periods where our gross margin declined due to, among other things, reduced factory utilization resulting from reduced customer demand, reduced selling prices and a change in product mix towards lower-margin products. Future market

15

Table of Contents

conditions may adversely affect our revenue and utilization rates and consequently our future gross margin, and this, in turn, could have an adverse impact on our business, financial condition and results of operations. In addition, increased raw material costs, changes in manufacturing yields, more complex engineering requirements and other factors may lead to lower margins for us in the future. As a result of these or other factors, we may be unable to maintain or increase our gross margin in future periods and our gross margin may fluctuate from period to period.

Our operating results may fluctuate significantly from period to period. We may not meet investors’ quarterly or annual financial expectations and, as a result, our stock price may decline.

Our quarterly and annual operating results and related expectations may vary significantly in the future based upon a number of factors, many of which are beyond our control. Factors that could cause operating results and related expectations to fluctuate include:

16

Table of Contents

The foregoing factors are difficult to forecast, and these, as well as other factors, could materially and adversely affect our quarterly and annual operating results and related expectations for future periods. In addition, if our operating results in any period do not meet our publicly stated guidance, if any, or the expectations of investors or securities analysts, our stock price may decline. Similarly, any publicly stated guidance we provide in the future may itself fail to meet the expectations of investors or securities analysts, and our stock price may decline as a result.

If our primary markets decline or fail to grow, our revenue and profitability may suffer.

Our future growth depends to a significant extent on the continued growth in usage of advanced electronic systems in our primary markets: Networks, A&D, Automotive and Multi-market. The rate and extent to which these markets grow, if at all, is uncertain. These markets may fail to grow or decline for many reasons, including insufficient consumer demand, lack of access to capital, sequestration or other changes in the U.S. defense budget and procurement processes, changes in regulatory environments, macro-economic factors and changes in network specifications. If demand for electronic systems in which our products are incorporated declines, fails to grow, or grows more slowly than we anticipate, purchases of our products may be reduced, which may adversely affect our business, financial condition and results of operations. In particular, our sales to Ford, which accounted for 19.0% of our revenue for fiscal year 2014 and substantially all of the revenue in our Automotive market, are dependent upon the health of the automotive industry, Ford’s ability to maintain or grow its market share, Ford’s continuing to source parts from us for its current platforms, lack of success by potential competitors in displacing us and Ford’s continuing to design our products into its automotive platforms as they evolve, none of which are assured.

We may be unable to close the BinOptics Acquisition or successfully integrate the business and personnel of BinOptics, and may not realize the anticipated synergies and benefits of the BinOptics Acquisition.

On November 17, 2014, we entered into an Agreement and Plan of Merger to acquire BinOptics. The BinOptics Acquisition is subject to various conditions to closing and may not close. If the BinOptics Acquisition does not close, we will have expended significant time and resources and we will not realize the expected benefits from the transaction.

We also may not realize the expected benefits from the BinOptics Acquisition after closing because of integration difficulties or other challenges. The success of the BinOptics Acquisition will depend, in part, on our ability to realize all or some of the anticipated synergies and other benefits from integrating the BinOptics business with our existing businesses. The integration process may be complex, costly, and time-consuming. The potential difficulties we may face in integrating the operations of the BinOptics business include, among others:

17

Table of Contents

BinOptics may have unanticipated or larger than anticipated liabilities for patent and trademark infringement claims, violations of laws, commercial disputes, taxes and other known and unknown types of liabilities. There may be liabilities that we underestimated or did not discover in the course of performing our due diligence investigation of these entities. We have limited recourse under the merger agreement to recover damages relating to the liabilities of BinOptics and its subsidiaries.

We may not be able to maintain or increase the levels of revenue, earnings or operating efficiency that each of BinOptics and us had achieved or might achieve separately. In addition, we may not accomplish the integration of the BinOptics business smoothly, successfully or within the anticipated costs or timeframe. If we experience difficulties with the integration process or if the BinOptics business deteriorates, the anticipated cost savings, growth opportunities and other synergies of the BinOptics Acquisition may not be realized fully, or at all, or may take longer to realize than expected. If any of the above risks occur, our business, financial condition, results of operations and cash flows may be materially and adversely impacted, we may fail to meet the expectations of investors or analysts, and our stock price may decline as a result.

We typically depend on orders from a limited number of customers for a significant percentage of our revenue.

In fiscal years 2014, 2013 and 2012, sales to our distributor Richardson and to Ford each accounted for more than 10% of our revenue. Sales to our top 10 direct and distribution customers accounted for an aggregate of 60%, 59% and 55%, respectively, of our revenue. While the composition of our top 10 customers varies from year to year, we expect that sales to a limited number of customers will continue to account for a significant percentage of our revenue for the foreseeable future. The purchasing arrangements with our customers are typically conducted on a purchase order basis that does not require our customers to purchase any minimum amount of our products over a period of time. As a result, it is possible that any of our major customers could terminate their purchasing arrangements with us or significantly reduce or delay the amount of our products that they order, purchase products from our competitors or develop their own products internally. The loss of, or a reduction in, orders from any major customer could cause a decline in revenue and adversely affect our results of operations.

Our investment in research and development may not be successful, which may impact our profitability.

The semiconductor industry requires substantial investment in research and development in order to develop and bring to market new and enhanced technologies and products. Research and development expenses were $73.7 million, $44.6 million and $36.8 million for our fiscal years 2014, 2013 and 2012, respectively. In each of the last three fiscal years, we invested in research and development as part of our strategy toward the development of innovative products and solutions to fuel our growth and profitability. We cannot assure you if or when the products and solutions where we have focused our research and development expenditures will become commercially successful. In addition, we may not have sufficient resources to maintain the level of investment in

18

Table of Contents

research and development required to remain competitive or succeed in our strategy. Our efforts to develop new and improved process technologies for use in our products require substantial expenditures that may not generate any return on investment, may take longer than we anticipate to generate a return or may generate a return on investment that is inadequate. In July 2013, we announced that we had licensed 0.5, 0.25 and 0.15 micron GaN process technology from Global Communications Semiconductors, LLC (GCS) and would be installing such process technology to our Lowell, Massachusetts manufacturing facility. This installation effort is expected to be a multi-year process and to involve tens of millions of dollars of investment in capital equipment, license fees and other related costs and expenses. We have in the past and may in the future experience unexpected difficulties, expenses, or delays in installing and qualifying this GaN technology, and ultimately, may not be successful in our efforts, may not realize the competitive advantage we anticipate from the license and porting effort, and may not realize customer demand for the GaN technology that meets our expectations following the installation effort, any of which could lead to reduced revenues and gross margin or otherwise harm our business. Similarly, following the Nitronex Acquisition we have announced a number of strategic plans and positive expectations concerning the future cost structure, manufacturability, market applicability and potential positive impact on our market share of another type of GaN technology called GaN-on-Silicon, which is a focus of Nitronex’s business. We may experience unexpected difficulties, expenses or delays in driving the scale manufacturing, decreased manufacturing cost structure, productization or customer adoption of GaN of any type that we are targeting, and ultimately may not be successful in our efforts, may not realize the competitive advantage or revenues or profits we anticipate from this technology, any of which could lead to reduced revenues and gross margin or otherwise harm our business.

We may incur significant risk and expense in attempting to win new business, and such efforts may never generate revenue.

To obtain new business, we often need to win a competitive selection process to develop semiconductors for use in our customers’ systems, known in the industry as a “design win”. These competitive selection processes can be lengthy and can require us to incur significant and unreimbursed design and development expenditures and dedicate scarce engineering resources in pursuit of a single customer opportunity. We may not win the competitive selection process and may never generate any revenue despite incurring significant design and development expenditures and selling, general and administrative expenses. Failure to obtain a design win sometimes prevents us from supplying components for an entire generation of a customer’s system. This can result in lost or foregone revenue and could weaken our position in future competitive selection processes.

Even when we achieve a design win, success is not assured. Customer qualification and design cycles can be lengthy, and it may take a year or more following a successful design win and product qualification for one of our products to be purchased in volume by the customer. We may experience difficulties manufacturing the part in volume, such as low yields, supply chain delays or shortages, or quality issues. Further, while the customer has successfully qualified our part for use in its system when it awards a design win to us, it may not have qualified all of the other components being sourced for its system, or qualified its system as a whole with its end customers. Any difficulties our customer may experience in completing those qualifications may delay or prevent us from translating the design win into revenue. These risks can be particularly acute in our A&D market, where we may spend material amounts and commit substantial design engineer resources to product development work in support of an OEM customer’s attempt to win business tied to a government contract award, but realize no related revenue or less than expected revenue from that investment based on failure of the OEM to win the business, government program cancellation, federal budget limitations, or otherwise. Any of these events, or any cancellation of a customer’s program or failure of our customer to successfully market its own product after our design win could materially and adversely affect our business, financial condition and results of operations, as we may have incurred significant expense and generated no revenue.

19

Table of Contents

We are subject to order and shipment uncertainties. Our profitability will decline if we fail to accurately forecast customer demand when managing inventory.

We generally sell our products on the basis of purchase orders rather than long-term purchase commitments from our customers. Our customers can typically cancel purchase orders or defer product shipments for some period without incurring liability to us. We typically plan production and inventory levels based on internal forecasts of customer demand, which can be highly unpredictable and can fluctuate substantially, leading to excess inventory write-downs, and resulting negative impacts on gross margin and net income. We have limited visibility into our customers’ inventories, future customer demand, and the product mix that our customers will require, which could adversely affect our production forecasts and operating margins. In a number of markets we serve, large dollar value customer orders scheduled for delivery in the current fiscal quarter may be canceled or rescheduled by the customer for delivery in a future fiscal quarter on short notice, which could cause our reported revenue to vary materially from our prior expectations. In addition, the rapid pace of innovation in our industry could render significant portions of our inventory obsolete. If we overestimate our customers’ requirements, we may have excess inventory, which could lead to obsolete inventory and unexpected costs. Conversely, if we underestimate our customers’ requirements, we may have inadequate inventory, which could lead to foregone revenue opportunities, loss of potential market share and damage to customer relationships as product deliveries may not be made on a timely basis, disrupting our customers’ production schedules. Some of our larger customers also require us to build and maintain minimum inventories and keep them available for purchase at specified locations based on non-binding demand estimates that are subject to change, which exposes us to increased inventory risk and makes it more difficult to manage our working capital. If demand from such customers decreases, we may be left with excess or obsolete inventory we are unable to sell. In response to anticipated long lead times to obtain inventory and materials from outside suppliers and foundries, we periodically order materials and build a stock of finished goods inventory in advance of customer demand. This advance ordering of raw material and building of finished goods inventory has in the past and may in the future result in excess inventory levels or unanticipated inventory write-downs if expected orders fail to materialize, or other factors make our products less saleable. In addition, any significant future cancellation or deferral of product orders could adversely affect our revenue and margins, increase inventory write-downs due to obsolete inventory, and adversely affect our operating results and stock price.

The average selling prices of our products may decrease over time, which could have a material adverse effect on our revenue and gross margin.

It is common in our industry for the average selling price of a given product to decrease over time as production volumes increase, competing products are developed, technology, industry standards and customer platforms evolve, or new technologies featuring higher performance or lower cost emerge. To combat the negative effects that erosion of average selling prices have had in the past and may in the future have on our revenue and gross margin, we attempt to actively manage the prices of our existing products and introduce new process technologies and products in the market that exhibit higher performance, new features that are in demand, or lower manufacturing cost. Despite this strategy, we may experience price erosion in select product platforms or generally in future periods. Failure to maintain our current prices or to successfully execute on our new product development strategy will cause our revenue and gross margin to decline, which could decrease the value of your investment in our common stock.

We face intense competition in our industry, and our inability to compete successfully could negatively affect our operating results.

The semiconductor industry is highly competitive. While we compete with a wide variety of companies, we compete with ADI across most of our primary markets. Our other significant competitors include, among others, Avago, Cobham, Microsemi, RFMD, Skyworks and TriQuint.

We believe future competition could also come from companies developing new alternative technologies, component suppliers based in countries with lower production costs and IC manufacturers achieving higher

20

Table of Contents

levels of integration that exceed the functionality offered by our products. Our customers and suppliers could also develop products that compete with or replace our products. A decision by any of our large customers to design and manufacture ICs internally could have an adverse effect on our operating results. Increased competition could mean lower prices for our products, reduced demand for our products, and a corresponding reduction in our ability to recover development, engineering and manufacturing costs.

Many of our existing and potential competitors have entrenched market positions, historical affiliations with original equipment manufacturers, considerable internal manufacturing capacity, established intellectual property rights, and substantial technological capabilities. Many of them may also have greater financial, technical, manufacturing or marketing resources than we do. Prospective customers may decide not to buy from us due to concerns about our relative size, financial stability or other factors. Our failure to successfully compete could result in lower revenue, decreased profitability and a lower stock price.

We operate in the semiconductor industry, which is cyclical and subject to significant downturns.

The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, price erosion, product obsolescence, evolving standards, short product lifecycles and significant fluctuations in supply and demand. The industry has historically experienced significant fluctuations in demand and product obsolescence, resulting in product overcapacity, high inventory levels and accelerated erosion of average selling prices. Downturns in many sectors of the electronic systems industry have in the past contributed to extended periods of weak demand for semiconductor products. We have experienced adverse effects on our profitability and cash flows during such downturns in the past, and our business may be similarly harmed by any downturns in the future, particularly if we are unable to effectively respond to reduced demand in a particular market.

We expect to make future acquisitions, dispositions and investments, which involve numerous risks.

We have an active corporate development program and routinely evaluate potential acquisitions of, and investments with or other strategic alliances involving, complementary technologies, design teams, products, and companies. We also may evaluate the merits of a potential divestment of one or more of our existing business lines. We expect to pursue such transactions if appropriate opportunities arise. However, we may not be able to identify suitable transactions in the future, or if we do identify such transactions, we may not be able to complete them on commercially acceptable terms, or at all. We also face intense competition for acquisitions from other acquirers in our industry. These competing acquirers may have significantly greater financial and other resources than us, which may prevent us from successfully pursuing a transaction. In the event we pursue acquisitions, we will face numerous risks including:

21

Table of Contents

Our past acquisitions required or continue to require significant management time and attention relating to the transaction and integration activities. If we fail to properly integrate these acquired companies with ours, we may not receive the expected benefits of the acquisitions. Even if a proposed acquisition is successfully realized and integrated, we may not receive the expected benefits of the transaction.

Past transactions, whether completed or abandoned by us, have resulted, and in the future may result, in significant costs, expenses, liabilities and charges to earnings. The accounting treatment for any acquisition may result in significant amortizable intangible assets which, when amortized, will negatively affect our consolidated results of operations. The accounting treatment for any acquisition may result in significant goodwill, which, if impaired, will negatively affect our consolidated results of operations. Furthermore, we may incur indebtedness or issue equity securities to pay for acquisitions. The incurrence of indebtedness could limit our operating flexibility and be detrimental to our profitability, and the issuance of equity securities would be dilutive to our existing stockholders. Any or all of the above factors may differ from the investment community’s expectations in a given quarter, which could negatively affect our stock price. In addition, as a result of the foregoing, we may not be able to successfully execute acquisitions in the future to the same extent as we have the in the past, if at all.

In the event we make future investments, the investments may decline in value or fail to deliver any strategic benefits we anticipate from them, and we may lose all or part of our investment. In the event we undertake divestments, we may suffer from associated management distraction, damaged customer relationships, failure to realize the perceived strategic, or financial merits of the divestment, or we may incur material indemnity liabilities to the purchaser. Further, the investments may have unanticipated or larger than anticipated liabilities for patent and trademark infringement claims, violations of laws, commercial disputes, taxes and other known and unknown types of liabilities. There may be liabilities that we underestimate or do not discover in the course of performing our due diligence investigation of the investment. We may not have recourse under the transaction documents to recover any damages relating to potential liabilities.

We may incur liabilities for claims of intellectual property infringement relating to our products.

The semiconductor industry is generally subject to frequent litigation regarding patents and other intellectual property rights. Other companies in the industry have numerous patents that protect their intellectual property rights in these areas, and have made in the past and may make in the future, claims that we have infringed or misappropriated their intellectual property rights. Our customers may assert claims against us for indemnification if they receive claims alleging that their or our products infringe others’ intellectual property rights, and have in the past and may in the future choose not to purchase our products based on their concerns over such a pending claim. In the event of an adverse result of any intellectual property rights litigation, we could be required to pay substantial damages for infringement, expend significant resources to develop non-infringing technology, incur material liability for royalty payments or fees to obtain licenses to the technology covered by the litigation or be subjected to an injunction, which could prevent us from selling our products, and materially and adversely affect our revenue and results of operations. Negotiated settlements resolving such claims may require us to pay substantial sums, as was the case in September 2013 when we paid $7.25 million in settlement of a suit alleging intellectual property misappropriation. We cannot be sure that we will be successful in any such non-infringing development or that any such license would be available on commercially reasonable terms, if at all. Any claims relating to the infringement of third-party proprietary rights, even if not meritorious, could result in costly litigation, lost sales, or damaged customer relationships and diversion of management’s attention and resources.

22

Table of Contents

We depend on third parties for products and services required for our business, which may limit our ability to meet customer demand, assure product quality and control costs.

We purchase numerous raw materials, such as ceramic packages, precious metals, semiconductor wafers and ICs, from a limited number of external suppliers. We also currently use several external manufacturing suppliers for assembly and testing of our products, and in some cases for fully-outsourced turnkey manufacturing of our products. We currently expect to increase our use of outsourced manufacturing in the future as a strategy. The ability and willingness of our external suppliers to perform is largely outside of our control. The use of external suppliers involves a number of risks, including the possibility of material disruptions in the supply of key components, the lack of control over delivery schedules, capacity constraints, manufacturing yields, quality and fabrication costs and misappropriation of our intellectual property. If these vendors’ processes vary in reliability or quality, they could negatively affect our products and, therefore, our customer relations and results of operations. We generally purchase raw materials on a purchase order basis and we do not have significant long-term supply commitments from our vendors. Where we do have long-term supply commitments, they may result in our being obligated to purchase more material than we need, materially and negatively impacting our operating results. In terms of relative bargaining power, many of our suppliers are larger than we are, with greater resources, and many of their other customers are larger and have greater resources than we do. If these vendors experience shortages or fail to accurately predict customer demand, they may have insufficient capacity to meet our demand, creating a capacity constraint on our business. They may also choose to supply others in preference to us in times of capacity constraint or otherwise, particularly where the other customers purchase in higher volume. Third-party supplier capacity constraints have in the past and may in the future prevent us from supplying customer demand that we otherwise could have fulfilled at attractive prices. If we have a firm commitment to supply our customer but are unable to do so based on inability or unwillingness of one of our suppliers to provide related materials or services, we may be liable for resulting damages and expense incurred by our customer.

Based on superior performance features, cost parameters or other factors, we utilize sole source suppliers for certain semiconductor packages and other materials, and it is common for one of our outside semiconductor foundries to be our sole supplier for the particular semiconductor fabrication process technologies manufactured at that supplier’s facility. Such supplier concentrations involve the risk of a potential future business interruption if the supplier becomes unable or unwilling to supply us at any point. While in some cases alternate suppliers may exist, because there are limited numbers of third-party wafer suppliers that use the process technologies we select for our products and that have sufficient capacity to meet our needs, it may not be possible or may be expensive to find an alternative source of supply. Even if we are able to find an alternative source, moving production to an alternative supplier requires an extensive qualification or re-qualification process that could prevent or delay product shipments, or disrupt customer’s production schedules, which could harm our business. In addition, some of our external foundry suppliers compete against us in the market in addition to being our supplier. The loss of a supplier can also significantly harm our business and operating results. A supplier may discontinue supplying us if its business is not sufficiently profitable, for competitive reasons or otherwise. We have in the past and may in the future have our supply relationship discontinued by an external foundry, causing us to experience supply chain disruption, customer dissatisfaction, loss of business and increased cost.

If we lose key personnel or fail to attract and retain key personnel, we may be unable to pursue business opportunities or develop our products.

We believe our continued ability to recruit, hire, retain and motivate highly-skilled engineering, operations, sales, administrative and managerial personnel is key to our future success. Competition for these employees is intense, particularly with respect to qualified engineers. Our failure to retain our present employees and hire additional qualified personnel in a timely manner and on reasonable terms could harm our competitiveness and results of operations. In addition, from time to time, we may recruit and hire employees from our competitors, customers, suppliers and distributors, which could result in liability to us, and has in the past and could in the

23

Table of Contents

future, damage our business relationship with these parties. None of our senior management team is contractually bound to remain with us for a specified period, and we generally do not maintain key person life insurance covering our senior management. The loss of any member of our senior management team could strengthen a competitor or harm our ability to implement our business strategy.

Sources for certain components and materials are limited, which could result in interruptions, delays, or reductions in product shipments.

Our industry may be affected from time to time by limited supplies of certain key components and materials. We have in the past and may in the future, experience delays or reductions in supply shipments, which could reduce our revenue and profitability. If key components or materials are unavailable, our costs could increase and our revenue could decline.

In particular, our manufacturing headquarters, design facilities, assembly and test facilities, and supply chain, and those of our contract manufacturers, are subject to risk of catastrophic loss due to fire, flood, or other natural or man-made disasters. The majority of our semiconductor products are fabricated in our Lowell, Massachusetts headquarters, where our only internal wafer fab is located. The majority of the internal and outsourced assembly and test facilities we utilize are located in the Pacific Rim, and some of our internal design, assembly and test facilities are located in California regions with above average seismic and severe weather activity. In addition, our research and development personnel are concentrated in a few locations, primarily our headquarters, Santa Clara, California, Sydney, Australia, Belfast, Northern Ireland and Cork, Ireland locations, with the expertise of the personnel at each such location generally focused on one or two specific areas. Any catastrophic loss or significant damage to any of these facilities would likely disrupt our operations, delay production, shipments and revenue, and result in significant expenses to repair or replace the facility, and in some instances, could significantly curtail our research and development efforts in a particular product area or primary market, which could have a material adverse effect on our operations. For example, in October 2011, heavy monsoon rains in Thailand caused widespread flooding affecting major cities and industrial parks where there is a concentration of semiconductor manufacturing, assembly and test sites. One of our contract manufacturing suppliers located in Thailand was affected by the flooding and, as a result of the flooding of our affected contract manufacturer, $2.7 million of orders that were scheduled for shipment to our customers in the three months ended December 30, 2011 were delayed into the second quarter of fiscal year 2012, or were canceled. In particular, any catastrophic loss at our headquarters facility would materially and adversely affect our business and financial results, revenue and profitability.

Our failure to continue to keep pace with new or improved semiconductor process technologies could impair our competitive position.

Semiconductor manufacturers constantly seek to develop new and improved semiconductor process technologies. Our future success depends in part upon our ability to continue to gain access to these semiconductor process technologies, internally or externally, in order to adapt to emerging customer requirements and competitive market conditions. We may be unable to internally develop such technologies successfully, and may be unable to gain access to them from merchant foundries or other sources on commercially reasonable terms, or at all. If we fail for any reason to remain abreast of new and improved semiconductor process technologies as they emerge, we may lose market share and our revenue and gross margin may decline, which could adversely affect our operating results.

Minor deviations in the manufacturing process can cause substantial manufacturing yield loss or even cause halts in production, which could have a material adverse effect on our revenue and gross margin.

Our products involve complexities in both their design and the semiconductor process technology employed in their fabrication. In many cases, the products are also assembled in customized packages or feature high levels of integration. Our products must meet exacting customer specifications for quality, performance and reliability.

24

Table of Contents

Our manufacturing yield, or the percentage of units of a given product in a given period that is usable relative to all such units produced, is a combination of yields including wafer fabrication, assembly, and test yields. Due to the complexity of our products, we periodically experience difficulties in achieving acceptable yields as even minor deviations in the manufacturing process can cause substantial manufacturing yield loss or even cause halts in production. Our customers may also test our components once they have been assembled into their products. The number of usable products that result from our production process can fluctuate as a result of many factors, including the following:

Typically, for a given level of sales, when our yields improve, our gross margin improves. When our yields decrease, our unit costs are typically higher, our gross margin is lower and our profitability is adversely affected, any or all of which can harm our results of operations and lower our stock price.

We depend on third-party sales representatives and distributors for a material portion of our revenues.

We sell many of our products to customers through independent sales representatives and distributors, as well as through our direct sales force. We are unable to predict the extent to which our independent sales representatives and distributors will be successful in marketing and selling our products. Moreover, many of our independent sales representatives and distributors also market and sell competing products. Our relationships with our representatives and distributors typically may be terminated by either party at any time, and do not require them to buy any of our products. Sales to distributors accounted for 22.5% of our revenue in fiscal year 2014, and sales to our largest distributor, Richardson, represented 15.0% of our revenue in the same period. If our distributors cease doing business with us or fail to successfully market and sell our products, our ability to sustain and grow our revenue could be materially adversely affected.

Our internal and external manufacturing, assembly and test model subjects us to various manufacturing and supply risks.

We operate a semiconductor wafer processing and manufacturing facility at our headquarters in Lowell, Massachusetts. This facility is also our primary internal design and assembly and test facility. We maintain other internal assembly and test operation facilities as well, including leased sites in Long Beach, California and Hsinchu, Taiwan. We also use multiple external foundries for outsourced semiconductor wafer supply, as well as multiple domestic and Asian assembly and test suppliers to assemble and test our products. A number of factors will affect the future success of these internal manufacturing facilities and outsourced supply and service arrangements, including the following:

25

Table of Contents

We may experience difficulties in managing any future growth.

To successfully conduct business in a rapidly evolving market, we must effectively plan and manage any current and future growth. Our ability to do so will be dependent on a number of factors, including:

If we do not effectively manage any future growth, we may not be able to take advantage of attractive market opportunities, our operations may be impacted, and we may experience delays in delivering products to our customers or damaged customer relationships, and achieve lower than anticipated revenue and decreased profitability.

We may not realize the expected benefits of our recent restructuring activities and other initiatives designed to reduce costs and increase revenue across our operations.

We have pursued a number of restructuring initiatives designed to reduce costs and increase revenue across our operations. These initiatives included reductions in our number of manufacturing facilities and significant workforce reductions in certain areas as we realigned our business. Additional initiatives included establishing certain operations closer in location to our global customers and evaluating functions that may be more efficiently performed through outsourcing arrangements. These initiatives have been substantial in scope and disruptive to some of our historical operations. We may not realize the expected benefits of these new initiatives.

26

Table of Contents

As a result of these initiatives, we have incurred restructuring or other charges and we may in the future experience disruptions in our operations, loss of personnel and difficulties in delivering products in a timely fashion. In fiscal years 2014, 2013 and 2012, we incurred restructuring charges of $14.8 million, $1.1 million and $1.9 million, respectively, consisting primarily of employee severance and related costs resulting from reductions in our workforce.

Our business could be harmed if systems manufacturers choose not to use components made of compound semiconductor materials we utilize.

Silicon semiconductor technologies are the dominant process technologies for the manufacture of ICs in high-volume, commercial markets, and the performance of silicon ICs continues to improve. While we use silicon for some applications, we also often use compound semiconductor technologies such as GaAs, InP, SiGe, or GaN to deliver reliable operation at higher power, higher frequency, or smaller form factor than a silicon solution has historically allowed. While these compound semiconductor materials offer high-performance features, it is generally more difficult to design and manufacture products with reliability and in volume using them. GaN and InP, in particular, are newer process technologies that do not have as extensive a track record of reliable performance in the field as many of the competing process technologies. Compound semiconductor technology tends to be more expensive than silicon technology due to its above-described challenges, and the generally lower volumes at which parts in those processes tend to be manufactured relative to silicon parts for high-volume consumer applications.

System designers in some markets may be reluctant to adopt our non-silicon products or may be likely to adopt silicon products in lieu of our products if silicon products meeting their demanding performance requirements are available, because of:

We cannot be certain that additional systems manufacturers will design our compound semiconductor products into their systems or that the companies that have utilized our products will continue to do so in the future. Improvements in the performance of available silicon process technologies and solutions could result in a loss of market share on our part. If our products fail to achieve or maintain market acceptance for any of the above reasons, our results of operations will suffer.

We may incur material costs and our business may be interrupted in connection with consolidation and outsourcing initiatives.

We have a number of ongoing strategic initiatives aimed at reducing our long-term operating cost model, including the outsourcing of various manufacturing functions to third party suppliers and consolidation of our operations within existing facilities. While the goal of these actions is to reduce recurring fixed cost, there are associated restructuring charges and execution risks associated with these initiatives. Exiting a leased site may involve contractual or negotiated exit payments with the landlord, temporary holding over at an increased lease rate, costs to perform restoration work required by the lease, or associated environmental liability, any of which may be material in amount. Consolidation of operations and outsourcing may involve substantial capital expenses and the transfer of manufacturing processes and personnel from one site to another, with resultant startup issues at the receiving site and need for re-qualification of the transitioned operations with major customers and for ISO or other certifications. We may experience shortages of affected products, delays and higher than expected expenses. Affected employees may be distracted by the transition or may seek other employment, which could cause our overall operational efficiency to suffer.

27

Table of Contents

We are subject to risks from our international sales and operations.

We have operations in Europe, Asia and Australia, and customers around the world. As a result, we are subject to regulatory, geopolitical and other risks associated with doing business outside the U.S. Global operations involve inherent risks, including currency controls, currency exchange rate fluctuations, tariffs, required import and export licenses, associated delays and other related international trade restrictions and regulations.

The legal system in many of the regions where we conduct business can lack transparency in certain respects relative to that of the U.S. and can accord local government authorities a higher degree of control and discretion over business than is customary in the U.S. This makes the process of obtaining necessary regulatory approvals and maintaining compliance inherently more difficult and unpredictable. In addition, the protection accorded to proprietary technology and know-how under these legal systems may not be as strong as in the U.S., and, as a result, we may lose valuable trade secrets and competitive advantages. The cost of doing business in European jurisdictions can also be higher than in the U.S. due to exchange rates, local collective bargaining regimes, and local legal requirements and norms regarding employee benefits and employer-employee relations, in particular. We are also subject to U.S. legal requirements related to our foreign operations, including the Foreign Corrupt Practices Act.

Sales to customers located outside the U.S. accounted for 49.1%, 41.3% and 47.1% of our revenue for the fiscal years 2014, 2013 and 2012, respectively. We expect that revenue from international sales will continue to be a significant part of our total revenue. Because the majority of our foreign sales are denominated in U.S. dollars, our products become less price-competitive in countries with currencies that are low or are declining in value against the U.S. dollar. Also, we cannot be sure that our international customers will continue to accept orders denominated in U.S. dollars. If they do not, our reported revenue and earnings will become more directly subject to foreign exchange fluctuations. Some of our customer purchase orders and agreements are governed by foreign laws, which may differ significantly from U.S. laws. We may be limited in our ability to enforce our rights under such agreements and to collect amounts owed to us.

The majority of our assembly, packaging, and test vendors are located in Asia. We generally do business with our foreign assemblers in U.S. dollars. Our manufacturing costs could increase in countries with currencies that are increasing in value against the U.S. dollar. Also, our international manufacturing suppliers may not continue to accept orders denominated in U.S. dollars. If they do not, our costs will become more directly subject to foreign exchange fluctuations. From time to time we may attempt to hedge our exposure to foreign currency risk by buying currency contracts or otherwise, and any such efforts involve expense and associated risk that the currencies involved may not behave as we expect, and we may lose money on such hedging strategies or not properly hedge our risk.

In addition, if terrorist activity, armed conflict, civil, economic or military unrest or political instability occurs in the U.S. or other locations, such events may disrupt our manufacturing, assembly, logistics, security and communications, and could also result in reduced demand for our products. We have in the past and, may again in the future, experience difficulties relating to employees traveling in and out of countries facing civil unrest or political instability, and with obtaining travel visas for our employees. Major health pandemics could also adversely affect our business and our customer order patterns. We could also be affected if labor issues disrupt our transportation arrangements or those of our customers or suppliers. There can be no assurance that we can mitigate all identified risks with reasonable effort. The occurrence of any of these events could have a material adverse effect on our operating results.

Our business could be adversely affected if we experience product returns, product liability and defects claims.

Our products are complex and frequently operate in high-performance, challenging environments. We may not be able to anticipate all of the possible performance or reliability problems that could arise with our products after they are released to the market. If such problems occur or become significant, we may experience reduced

28

Table of Contents

revenue and increased costs related to product recalls, inventory write-offs, warranty or damage claims, delays in, cancellations of, or returns of product orders and other expenses. The many materials and vendors used in the manufacture of our products increase the risk that some defects may escape detection in our manufacturing process and subsequently affect our customers, even in the case of long-standing product designs. Our use of newly-developed or less mature semiconductor process technologies, such as GaN and InP, which have a less extensive track record of reliability in the field than other more mature process technologies, also increases the risk of performance and reliability problems. These matters have arisen in our operations from time to time in the past, have resulted in significant expense to us per occurrence, and will likely occur again in the future. The occurrence of defects could result in product returns and liability claims, reduced product shipments, the loss of customers, the loss of or delay in market acceptance of our products, harm to our reputation, diversion of management’s time and resources, lower revenue, higher expenses and reduced profitability. Any warranty or other rights we may have against our suppliers for quality issues caused by them may be more limited than those our customers have against us, based on our relative size, bargaining power, or otherwise. In addition, even if we ultimately prevail, such claims could result in costly litigation, divert management’s time and resources and damage our customer relationships.

We also face exposure to potential liability resulting from the fact that some of our customers integrate our products into consumer products such as automobiles or mobile communication devices, which are then sold to consumers in the marketplace. We may be named in product liability claims even if there is no evidence that our products caused a loss. Product liability claims could result in significant expenses in connection with the defense of such claims and possible damages. In addition, we may be required to participate in a recall if our products prove to be defective. Any product recall or product liability claim brought against us, particularly in high-volume consumer markets, could have a material negative impact on our reputation, business, financial condition or results of operations.

The outcome of litigation in which we are involved is unpredictable and an adverse decision in any such matter could subject us to damage awards and lower the market price of our stock.

From time to time we are a party to litigation matters such as those described in Part II. Item 1, “Legal Proceedings” of this Annual Report. These and any other future disputes, litigations, investigations, administrative proceedings or enforcement actions we may be involved in may divert financial and management resources that would otherwise be used to benefit our operations, result in negative publicity and harm our customer or supplier relationships. Although we intend to contest such matters vigorously, we cannot assure you that their outcome will be favorable to us. An adverse resolution of any such matter in the future, including the results of any amicable settlement, could subject us to material damage awards or settlement payments or otherwise materially harm our business.

Our financial results may be adversely affected by increased tax rates and exposure to additional tax liabilities.

Our effective tax rate is highly dependent upon the geographic composition of our worldwide earnings and tax regulations governing each region, each of which can change from period to period. We are subject to income taxes in both the U.S. and various foreign jurisdictions, and significant judgment is required to determine our worldwide tax liabilities. Our effective tax rate as well as the actual tax ultimately payable could be adversely affected by changes in the amount of our earnings attributable to countries with differing statutory tax rates, changes in the valuation of our deferred tax assets, changes in tax laws or tax rates (particularly in the U.S. or Ireland), increases in non-deductible expenses, the availability of tax credits, material audit assessments, or repatriation of non-U.S. earnings, each of which could materially affect our profitability. Any significant increase in our effective tax rates could materially reduce our net income in future periods and decrease the value of your investment in our common stock.

Changes in tax laws are introduced from time to time to reform U.S. taxation of international business activities. Depending on the final form of legislation enacted, if any, these consequences may be significant for

29

Table of Contents

us due to the large scale of our international business activities. If any of these proposals are enacted into legislation, they could have material adverse consequences on the amount of tax we pay and, thereby, on our financial position and results of operations.

Our limited ability to protect our proprietary information and technology may adversely affect our ability to compete.

Our future success and ability to compete is dependent in part upon our protection of our proprietary information and technology through patent filings and otherwise. We cannot be certain that any patents we apply for will be issued or that any claims allowed from pending applications will be of sufficient scope or strength to provide meaningful protection or commercial advantage. Our competitors may also be able to design around our patents. The laws of some countries in which our products are or may be developed, manufactured, or sold, may not protect our products or intellectual property rights to the same extent as U.S. laws, increasing the possibility of piracy of our technology and products. Although we intend to vigorously defend our intellectual property rights, we may not be able to prevent misappropriation of our technology or may need to expend significant financial and other resources in defending our rights.

In addition, we rely on trade secrets, technical know-how and other unpatented proprietary information relating to our product development and manufacturing activities. We try to protect this information by entering into confidentiality agreements with employees and other parties. We cannot be sure that these agreements will be adequate and will not be breached, that we would have adequate remedies for any breach or that our trade secrets and proprietary know-how will not otherwise become known or independently discovered by others.

Additionally, our competitors may independently develop technologies that are substantially equivalent or superior to our technology. Despite our efforts to protect our proprietary rights, unauthorized parties may attempt to copy, or otherwise obtain or use our products or technology. Patent litigation is expensive, and our ability to enforce our patents and other intellectual property, is limited by our financial resources and is subject to general litigation risks. If we seek to enforce our rights, we may be subject to claims that the intellectual property rights are invalid, are otherwise not enforceable, or are licensed to the party against whom we assert a claim. In addition, our assertion of intellectual property rights could result in the other party seeking to assert alleged intellectual property rights of its own against us, which is a frequent occurrence in such litigations.

If we fail to comply with export control regulations we could be subject to substantial fines or other sanctions, including loss of export privileges.

Certain of our products are subject to the Export Administration Regulations, administered by the Department of Commerce, Bureau of Industry Security, which require that we obtain an export license before we can export products or technology to specified countries. Other products are subject to the International Traffic in Arms Regulations, which restrict the export of information and material that may be used for military or intelligence applications by a foreign person. U.S. regulators have announced “export control reform” that is expected to change many of the rules applicable to us in this area in the future in ways we do not yet fully understand, and we could experience challenges in complying with the new rules as they become effective, or face difficulties or an inability to ship products to certain countries and customers.

We are also subject to U.S. import regulations and the import and export regimes of other countries in which we operate. Failure to comply with these laws could result in sanctions by the government, including substantial monetary penalties, denial of export privileges and debarment from government contracts. Export and import regulations may create delays in the introduction of our products in international markets, or prevent the export or import of our products to certain countries or customers altogether. Any change in export or import regulations or related legislation, shift in approach by regulators to the enforcement or scope of existing regulations, changes in the interpretation of existing regulations by regulators or change in the countries, persons or technologies targeted by such regulations, could harm our business by resulting in decreased use of our products by, or our

30

Table of Contents

decreased ability to export or sell our products to, existing or potential customers with international operations. In addition, our sale of our products to or through third-party distributors, resellers and sales representatives creates the risk that any violation of these laws they may engage in may cause disruption in our markets or otherwise bring liability on us.

We face risks associated with government contracting.

Some of our revenue is derived from contracts with agencies of the U.S. government or subcontracts with its prime contractors. Under some of our government subcontracts, we are required to maintain secure facilities and to obtain security clearances for personnel involved in performance of the contract, in compliance with applicable federal standards. If we were unable to comply with these requirements, or if personnel critical to our performance of these contracts were to lose their security clearances, we might be unable to perform these contracts or compete for other projects of this nature, which could adversely affect our revenue.

We may need to modify our activities or incur substantial costs to comply with environmental laws, and if we fail to comply with environmental laws, we could be subject to substantial fines or be required to change our operations.

We are subject to a variety of international, federal, state and local governmental regulations directed at preventing or mitigating climate change and other environmental harms, as well as to the storage, discharge, handling, generation, disposal and labeling of toxic or other hazardous substances used to manufacture our products. If we fail to comply with these regulations, substantial fines could be imposed on us, and we could be required to suspend production, alter manufacturing processes, cease operations or remediate polluted land, air or groundwater, any of which could have a negative effect on our revenue, results of operations and business. Failure to comply with environmental regulations could subject us to civil or criminal sanctions and property damage or personal injury claims. Compliance with current or future environmental laws and regulations could restrict our ability to expand our facilities or build new facilities, or require us to acquire additional expensive equipment, modify our manufacturing processes, or incur other substantial expenses which could harm our business, financial condition and results of operations. In addition, under some of these laws and regulations, we could be held financially responsible for remedial measures if our properties or, those nearby are contaminated, even if we did not cause the contamination. We have incurred in the past and may in the future incur environmental liability based on the actions of prior owners, lessees or neighbors of sites we have leased or may lease in the future, or sites we become associated with due to acquisitions. We cannot predict:

In addition to the costs of complying with environmental, health and safety requirements, we may in the future incur costs defending against environmental litigation brought by government agencies, lessors at sites we currently lease or have been associated with in the past and other private parties. We may be defendants in lawsuits brought by parties in the future alleging environmental damage, personal injury or property damage. A significant judgment or fine levied against us, or agreed settlement payment, could materially harm our business, financial condition and results of operations.

31

Table of Contents

Environmental regulations such as the WEEE and RoHS directives limit our flexibility and may require us to incur material expense.

Various countries require companies selling a broad range of electrical equipment to conform to regulations such as the Waste Electrical and Electronic Equipment (WEEE) and the European Directive 2002/95/Ec on Restriction of Hazardous Substances (RoHS). New environmental standards such as these could require us to redesign our products in order to comply with the standards, require the development of compliance administration systems or otherwise limit our flexibility in running our business or require us to incur substantial compliance costs. For example, RoHS requires that certain substances be removed from most electronic components. The WEEE directive makes producers of electrical and electronic equipment financially responsible for specified collection, recycling, treatment and disposal of past and future covered products. We have already invested significant resources into complying with these regimes, and further investments may be required. Alternative designs implemented in response to regulation may be more costly to produce, resulting in an adverse effect on our gross profit margin. If we cannot develop compliant products in a timely fashion or properly administer our compliance programs, our revenue may also decline due to lower sales, which would adversely affect our operating results. Further, if we were found to be non-compliant with any rule or regulation, we could be subject to fines, penalties and/or restrictions imposed by government agencies that could adversely affect our operating results.

Customer demands and new regulations related to “conflict” minerals may force us to incur additional expenses and liabilities.

In August 2012, the SEC adopted its final rule to implement Section 1502 of the Dodd-Frank Wall Street Reform and Consumer Protection Act regarding disclosure and reporting requirements for companies who use “conflict” minerals mined from the Democratic Republic of Congo and adjoining countries in their products. In the semiconductor industry, these minerals are most commonly found in metals used in the manufacture of semiconductor devices and related assemblies. These new requirements could adversely affect our ability to source related minerals and metals and increase our related cost. We will face difficulties and increased expense associated with complying with the disclosure requirements, such as costs related to determining the source of any conflict minerals used in our products. Continued timely reporting is dependent upon the improvement and implementation of new systems and processes and information supplied by our suppliers of products that contain, or potentially contain, conflict minerals. Also, our supply chain is complex, and some suppliers may be unwilling to share related confidential information regarding the source of their products, or may provide us information that is inaccurate or inadequate. If those risks arise, or if our processes in obtaining that information do not fulfill the SEC’s requirements, we may face both reputational challenges and SEC enforcement risks based on our inability to sufficiently verify the origins of the subject minerals and metals or otherwise. More recently, Executive Orders issued by the President of the U.S. have increased sanctions in this area as well, which may impact us in the scenarios described above. Moreover, we may encounter challenges to satisfy any related requirements of our customers, which may be different from or more onerous than the requirements of the related SEC rules and Executive Orders. If we cannot satisfy these customers, they may choose a competitor’s products or may choose to disqualify us as a supplier, and we may have to write off inventory in the event that it becomes unsalable as a result of these regulations.

32

Table of Contents

Our term loan and revolving credit facility could result in outstanding debt with a claim to our assets that is senior to that of our stockholders, and may have other adverse effects on our results of operations.

As of October 3, 2014, we have a term loan outstanding of $349.1 million and revolving credit facility with a syndicate of lenders with a potential future borrowing availability of up to $100.0 million, subject to compliance with financial and other covenants. As of October 3, 2014, we had no outstanding borrowings under the revolving credit facility. However, we currently intend to draw approximately $100 million on the revolving credit facility to partially fund the BinOptics Acquisition. The facility is secured by a first priority lien on all domestic subsidiaries. The amount of our indebtedness could have important consequences, including the following:

Our credit facility also contains certain restrictive covenants that may limit or eliminate our ability to incur additional debt, sell, lease or transfer our assets, pay dividends, make capital expenditures, investments and loans, make acquisitions, guarantee debt or obligations, create liens, enter into transactions with our affiliates, enter into new lines of business and enter into certain merger, consolidation or other reorganizations transactions. These restrictions could limit our ability to withstand downturns in our business or the economy in general or to take advantage of business opportunities that may arise, any of which could place us at a competitive disadvantage relative to our competitors that are not subject to such restrictions. If we breach a loan covenant, the lenders could either refuse to lend funds to us or accelerate the repayment of any outstanding borrowings under the credit facility. We might not have sufficient assets to repay such indebtedness upon a default. If we are unable to repay the indebtedness, the lenders could initiate a bankruptcy proceeding against us or collection proceedings with respect to our subsidiaries securing the facility, which could materially decrease the value of our common stock.

We are a holding company and rely on dividends, distributions and other payments, advances and transfers of funds from our subsidiaries to meet our obligations.

As a holding company, we derive substantially all of our cash flow from our subsidiaries. Because we conduct our operations through our subsidiaries, we depend on those entities for dividends and other payments or distributions to meet our operating needs. Legal and contractual restrictions in any existing and future outstanding indebtedness we or our subsidiaries incur may limit our ability to obtain cash from our subsidiaries. The deterioration of the earnings from, or other available assets of, our subsidiaries for any reason could limit or impair their ability to pay dividends or other distributions to us.

Variability in self-insurance liability estimates could adversely impact our results of operations.

We self-insure for employee health insurance and workers’ compensation insurance coverage up to a predetermined level, beyond which we maintain stop-loss insurance from a third-party insurer. Our aggregate exposure varies from year to year based upon the number of participants in our insurance plans. We estimate our

33

Table of Contents

self-insurance liabilities using an analysis provided by our claims administrator and our historical claims experience. Our accruals for insurance reserves reflect these estimates and other management judgments, which are subject to a high degree of variability. If the number or severity of claims for which we self-insure increases, it could cause a material and adverse change to our reserves for self-insurance liabilities, as well as to our earnings.

We may be subject to liabilities based on alleged links between the semiconductor manufacturing process and certain illnesses and birth defects.

In recent years, there has been increased media scrutiny and associated reports regarding a potential link between working in semiconductor manufacturing clean room environments and birth defects and certain illnesses, primarily cancer. Regulatory agencies and industry associations have begun to study the issue to determine if any actual correlation exists. Because we utilize clean rooms, we may become subject to liability claims alleging personal injury. In addition, these reports may also affect our ability to recruit and retain employees. A significant judgment against us or material defense costs could harm our reputation, business, financial condition and results of operations.

We rely on third parties to provide corporate infrastructure services necessary for the operation of our business. Any failure of one or more of our vendors to provide these services could have a material adverse effect on our business.

We rely on third-party vendors to provide critical corporate infrastructure services, including, among other things, certain services related to information technology and network development and monitoring. We depend on these vendors to ensure that our corporate infrastructure will consistently meet our business requirements. The ability of these third-party vendors to successfully provide reliable, high quality services is subject to technical and operational uncertainties that are beyond our control. While we may be entitled to damages if our vendors fail to perform under their agreements with us, our agreements with these vendors limit the amount of damages we may receive. In addition, we do not know whether we will be able to collect on any award of damages or that any such damages would be sufficient to cover the actual costs we would incur as a result of any vendor’s failure to perform under its agreement with us. Any failure of our corporate infrastructure could have a material adverse effect on our business, financial condition and results of operations. Upon expiration or termination of any of our agreements with third-party vendors, we may not be able to replace the services provided to us in a timely manner or on terms and conditions, including service levels and cost, that are favorable to us, and a transition from one vendor to another vendor could subject us to operational delays and inefficiencies until the transition is complete.

Risks Relating to Ownership of our Common Stock

The market price of our common stock may be volatile, which could result in substantial losses for investors.

You should consider an investment in our common stock risky and invest only if you can withstand a significant loss and wide fluctuations in the market value of your investment. In addition to the risks described in this report, other factors that may cause the market price of our common stock to fluctuate include:

34

Table of Contents

Furthermore, the stock markets recently have experienced price and volume fluctuations that have affected and continue to affect the market prices of equity securities of many companies. These fluctuations often have been unrelated or disproportionate to the operating performance of those companies. These broad market and industry fluctuations, as well as general economic, political, and market conditions such as recessions, interest rate changes or international currency fluctuations, may negatively impact the market price of our common stock. In the past, companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We may be the target of this type of litigation in the future. Securities litigation against us could result in substantial costs and divert our management’s attention from other business concerns, which could seriously harm our business.

If securities or industry analysts do not publish research or reports about our business, or publish negative reports about our business, our stock price and trading volume could decline.

The trading market for our common stock will depend on the research and reports that securities or industry analysts publish about us or our business. We do not have any control over these analysts. If one or more of the analysts who cover us downgrade our common stock or change their opinion of our common stock, our stock price would likely decline. If one or more of these analysts cease their coverage of us or fail to regularly publish reports on us, we could lose visibility in the financial markets, which could cause our stock price or trading volume to decline.

Our common stock price may decline if a substantial number of shares are sold in the market by our stockholders.

Future sales of substantial amounts of shares of our common stock by our existing stockholders in the public market, or the perception that these sales could occur, may cause the market price of our common stock to decline. Increased sales of our common stock in the market for any reason could exert significant downward pressure on our stock price. These sales also might make it more difficult for us to sell equity or equity-related securities in the future at a time and price we deem appropriate.

Some of our stockholders can exert control over us, and they may not make decisions that reflect our interests or those of other stockholders.

Our largest stockholders control a significant amount of our outstanding common stock. As of October 3, 2014, John and Susan Ocampo beneficially owned 52.6% of our common stock and certain investment funds affiliated with Summit Partners, L.P. owned 19.9% of our common stock on an as-converted basis. As a result,

35

Table of Contents

these stockholders will be able to exert a significant degree of influence over our management and affairs and control over matters requiring stockholder approval, including the election of our directors and approval of significant corporate transactions. In addition, this concentration of ownership may delay or prevent a change in control of us and might affect the market price of our securities. In addition, the interests of these stockholders may not always coincide with your interests or the interests of other stockholders.

We may engage in future capital-raising transactions that dilute our stockholders or cause us to incur debt.

We may issue additional equity, debt or convertible securities to raise capital in the future. If we do, existing stockholders may experience significant further dilution. In addition, new investors may demand rights, preferences or privileges that differ from, or are senior to, those of our existing stockholders. Our incurrence of indebtedness could limit our operating flexibility and be detrimental to our results of operations.

We are required to evaluate our internal control over financial reporting under Section 404 of the Sarbanes-Oxley Act of 2002, and any adverse results from such evaluation could result in a loss of investor confidence in our financial reports and have an adverse effect on our stock price.

Pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, we are required to furnish a report by our management on our internal control over financial reporting and evaluate the effectiveness of our internal control over financial reporting as of the end of each fiscal year. Such a report will contain, among other matters, an assessment of the effectiveness of our internal control over financial reporting as of the end of our fiscal year, including a statement as to whether or not our internal control over financial reporting is effective. This assessment must include disclosure of any material weaknesses in our internal control over financial reporting identified by management. If our management identifies one or more material weaknesses in our internal control over financial reporting during this process, we will be unable to assert such internal control is effective. If we are unable to assert that our internal control over financial reporting is effective, or if our independent registered public accounting firm is unable to express an opinion on the effectiveness of our internal controls, we could lose investor confidence in the accuracy and completeness of our financial reports, which could have an adverse effect on our stock price. We cannot assure you that we will not have deficiencies or weaknesses in our internal control over financial reporting in the future.

We may also rely on external consultants to supplement our internal controls. For example, we may rely on external consultants to supplement our financial reporting in connection with our accounting for income taxes and other complex accounting and financial matters, some of which require significant technical accounting expertise or require significant judgment. Use of external consultants involves additional risk that our external consultants may not perform as expected, or that coordination between our internal and external resources may not be adequate, resulting in one or more procedures not being performed or reviewed as planned, or one or more errors not being identified and corrected. If we do not effectively manage our external consultants or if they fail to perform as expected or fail to provide an adequate level of expertise in certain areas, our ability to comply with our financial reporting requirements and other rules that apply to reporting companies could be impaired and the accuracy and completeness of our financial reports could be compromised, which could adversely affect our stock price.

As an emerging growth company, we have elected to delay adoption of new or revised accounting standards, and thus our financial statements may not be comparable to those of most other companies. In addition, we are entitled to utilize other reduced disclosure and governance requirements applicable to emerging growth companies.

Pursuant to the Jumpstart Our Business Startups Act (JOBS Act), as an emerging growth company, we have elected to take advantage of an extended transition period for any new or revised accounting standards that may be issued by the Financial Accounting Standards Board (FASB) or the SEC, which means that when a standard is issued or revised and it has different application dates for public or private companies, we, as an emerging growth company, can delay adoption of the standard until it applies to private companies. This may make a

36

Table of Contents

comparison of our financial statements with any other public company that is not an emerging growth company difficult, as they may be applying different standards. If some investors find our common stock less attractive as a result, there may be a less active trading market for our common stock and our stock price may be more volatile and could decline.

As an emerging growth company, we also intend to utilize certain exemptions from various reporting requirements that are applicable to other public companies that are not emerging growth companies, including, but not limited to, not being required to provide the auditor attestation report otherwise required by Section 404 of the Sarbanes-Oxley Act with respect to our internal control over financial reporting, and reduced disclosure obligations regarding executive compensation in our periodic reports and proxy statements. We may utilize these reporting exemptions until we are no longer an emerging growth company. We will remain an emerging growth company for up to five years, subject to certain conditions. We cannot predict if investors will find our common stock less attractive because we rely on these exemptions.

Anti-takeover provisions in our charter documents and Delaware law could prevent or delay a change in control of our company that stockholders may consider beneficial and may adversely affect the price of our stock.

Provisions of our fourth amended and restated certificate of incorporation and second amended and restated bylaws may discourage, delay or prevent a merger, acquisition or change of control that a stockholder may consider favorable. These provisions could also discourage proxy contests and make it more difficult for stockholders to elect directors and take other corporate actions. The existence of these provisions could limit the price that investors might be willing to pay in the future for shares of our common stock. These provisions include authorizing the issuance of “blank check” preferred stock, staggered elections of directors, and establishing advance notice requirements for nominations for election to the board of directors and for proposing matters to be submitted to a stockholder vote. Provisions of Delaware law may also discourage, delay or prevent someone from acquiring or merging with our company or obtaining control of our company. Specifically, Section 203 of the Delaware General Corporate Law may prohibit business combinations with stockholders owning 15% or more of our outstanding voting stock and could reduce our value.

We do not intend to pay dividends for the foreseeable future.

We do not intend to pay any cash dividends on our common stock in the foreseeable future. The payment of cash dividends is restricted under the terms of the agreements governing our indebtedness. In addition, because we are a holding company, our ability to pay cash dividends may be limited by restrictions on our ability to obtain sufficient funds through dividends from subsidiaries, including restrictions under the terms of the agreements governing our indebtedness. We anticipate that we will retain all of our future earnings for use in the development of our business and for general corporate purposes. Any determination to pay dividends in the future will be at the discretion of our board of directors. Accordingly, investors must rely on sales of their common stock after price appreciation, which may never occur, as the only way to realize any future gains on their investments.

We are a “controlled company” within the meaning of the rules of the NASDAQ Stock Market, and, as a result, will qualify for, and will rely on, exemptions from certain corporate governance requirements. Our stockholders will not have the same protections afforded to stockholders of companies that are subject to such requirements.

John and Susan Ocampo control a majority of the voting power of our outstanding common stock. We are a “controlled company” within the meaning of the corporate governance standards of the Nasdaq Stock Market. Under these rules, a listed company of which more than 50% of the voting power is held by an individual, group or another company is a “controlled company” and may elect not to comply with certain corporate governance requirements, including:

37

Table of Contents

We currently are a “controlled company”, currently plan to rely on the exemption regarding the requirement that a majority of the board of directors consist of independent directors in the future, and may utilize any or all of these exemptions from time to time in the future. Accordingly, you may not have the same protections afforded to stockholders of companies that are subject to all of the corporate governance requirements of the Nasdaq Stock Market.

ITEM 1B. UNRESOLVED STAFF COMMENTS.

None.

ITEM 2. PROPERTIES.

For additional information regarding property, plant and equipment by geographic region for each of the last two fiscal years, see Notes to Consolidated Financial Statements in Item 8 of this Annual Report.

Our principal executive offices are located in a leased facility in Lowell, Massachusetts. We also maintain leased facilities for our design centers located in Massachusetts, California, North Carolina, New York, Ireland, Northern Ireland, France, Canada and Australia as well as for our administrative, assembly and test operations located in New Hampshire and Taiwan, and our local sales offices in Oregon, Canada, Germany, Malaysia, China, Japan, India and South Korea. We do not own any real property. We believe that our leased facilities are adequate for our present operations. The following is a list of our main facilities and their primary functions as of November 30, 2014.

ITEM 3. LEGAL PROCEEDINGS.

From time to time we may be subject to commercial and employment disputes, claims by other companies in the industry that we have infringed their intellectual property rights and other similar claims and litigations. Any such claims may lead to future litigation and material damages and defense costs. Other than as set forth below, we

38

Table of Contents

were not involved in any pending legal proceedings as of the filing date of this Annual Report on Form 10-K that we believe could have a material adverse effect on our business, operating results, financial condition or cash flows.

Patent Suit Against Laird. We brought a patent infringement suit against Laird Technologies, Inc. (Laird) in the Federal District Court for the District of Delaware on February 11, 2014, seeking monetary damages and a permanent injunction. The suit alleges that Laird infringes on our United States Patent No. 6,272,349 (‘349 Patent), titled “Integrated Global Positioning System Receiver,” by making, using, selling, offering to sell or selling products incorporating an integrated global positioning receiver that include structure(s) recited in the ‘349 Patent, including global positioning system modules for automotive industry customers. Laird filed an answer and declaratory judgment claims of invalidity and noninfringement on June 30, 2014. We filed a reply to the counterclaims on July 24, 2014.

We filed a motion for preliminary injunction, seeking to enjoin Laird’s infringement pending full trial on the merits. The court granted the motion for a preliminary injunction on June 13, 2014 and required us to post a bond of $4 million to secure the injunction. In granting the injunction, the court found that we are likely to succeed on the merits of the case at a full trial and that the equities weighed in favor of preliminarily enjoining Laird from making sales of its product until trial. Trial is scheduled to begin on May 16, 2016.

Mindspeed Tender Offer Litigation in Delaware and California. Following our November 2013 announcement of the execution of a definitive agreement between us and Mindspeed Technologies, Inc. (Mindspeed) contemplating a tender offer by us for all outstanding shares of common stock of Mindspeed and thereafter a merger with Mindspeed (Merger), a number of purported class action lawsuits were filed against Mindspeed, its directors, our merger subsidiary and us in the Delaware Court of Chancery and the California Superior Court for Orange County.

The complaints alleged, generally, that the Mindspeed director defendants breached their fiduciary duties to Mindspeed stockholders, and that the other defendants aided and abetted such breaches, by seeking to sell Mindspeed through an allegedly defective process, for an unfair price, and on unfair terms. The lawsuits sought, among other things, equitable relief that would enjoin the consummation of the proposed Merger, rescission of the proposed Merger (to the extent the proposed Merger has already been consummated), damages and attorneys’ fees and costs.

Further Discussion of Delaware Tender Offer Litigation. On November 22, 2013, an amended complaint was filed in the Delaware Court of Chancery. The amended complaint included similar allegations to the original complaint, along with claims that the Mindspeed Schedule 14D-9 filed in connection with the Merger included misstatements or omissions of material facts. On November 25, 2013, a motion for preliminary injunction was filed in the Delaware Court of Chancery. On December 3, 2013, all of the complaints filed in the Delaware Court of Chancery were consolidated (Delaware Actions).

On December 6, 2013, the plaintiffs in the Delaware Actions filed their brief in support of a motion to enjoin the proposed Merger. While the Defendants denied the allegations made in the lawsuits and maintain that they have committed no wrongdoing whatsoever, to permit the timely consummation of the Merger, and without admitting the validity of any allegations made in the lawsuits, the Defendants concluded that it was desirable that the Delaware Actions be resolved.

On December 9, 2013, the Defendants’ and plaintiffs’ counsel in the Delaware Actions entered into a memorandum of understanding to settle the Delaware Actions and to resolve all allegations which were brought or could have been brought by the purported class of Mindspeed shareholder plaintiffs. The settlement provides for the release of all claims against the Defendants relating to the proposed Merger. In connection with the settlement, Mindspeed agreed to provide additional supplemental disclosures concerning the tender offer as reflected in Amendment No. 3 to the Schedule 14D-9 filed with the SEC on December 10, 2013, which supplement the information provided in the Schedule 14D-9. After the parties entered into the memorandum of

39

Table of Contents

understanding, the motion for a preliminary injunction was withdrawn and the hearing vacated in the Delaware Actions. The Merger closed on December 18, 2013. The parties submitted final settlement papers to the Delaware Court of Chancery, which ordered that notice of the settlement be issued to class members. On September 23, 2014, the Court of Chancery approved the settlement and awarded plaintiffs’ counsel the agreed-upon attorneys’ fee of $425,000.

Further Discussion of California Tender Offer Litigation. On December 5, 2013, an amended complaint was filed in one of the California actions. The amended complaint includes similar allegations to the original complaint along with claims that the Mindspeed Schedule 14D-9 filed in connection with the Merger included misstatements or omissions of material facts. Plaintiffs in the action filed a request to dismiss the case in light of the settlement approved by the Delaware Court of Chancery. On November 5, 2014, the California Court entered an order dismissing the action.

CSR Matter. In January 2013, CSR Technology Inc. (CSR) filed a complaint against us in the Massachusetts Superior Court for Suffolk County alleging breach of contract, breach of the implied covenant of good faith and fair dealing, misrepresentation, deceptive business practices and unfair competition, all relating to our purported failure to honor an alleged minimum purchase commitment contract with respect to certain semiconductor chips to be supplied by CSR for use in our automotive module product. The complaint claimed alleged damages of $2.2 million and asked for attorney’s fees and other remedies. We filed an answer to the complaint on January 28, 2013. The parties concluded fact discovery and CSR filed a motion for summary judgment, which we opposed. The parties agreed to settle the case in July 2014 without any finding of liability or judgment against us, and the compliant was dismissed by the court with prejudice in August 2014.

ITEM 4. MINE SAFETY DISCLOSURES.

Not applicable.

40

Table of Contents

PART II

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

Our common stock has been listed on the NASDAQ Global Select Market under the symbol “MTSI” since March 15, 2012. The following table sets forth for the periods indicated the high and low sale prices of our common stock on the NASDAQ Global Select Market. The number of stockholders of record of our common stock as of November 15, 2014 was approximately 20.

The high and low sales prices of our common stock by quarter in fiscal year 2014 and fiscal year 2013 follows:

We have not paid cash dividends on our common stock since the date of our IPO and we do not anticipate paying cash dividends in the foreseeable future. Our credit facility also contains restrictions on our ability to pay cash dividends, subject to certain exceptions.

41

Table of Contents

Stock Price Performance Graph

The following graph shows a comparison from March 15, 2012 (the date our common stock commenced trading on NASDAQ) through October 3, 2014 of the total cumulative return of our common stock with the total cumulative return of the NASDAQ Composite Index and the PHLX Semiconductor Index. The amounts represented below assume an investment of $100 in our common stock at the closing price of $20.55 on March 15, 2012 and in the NASDAQ Composite Index and the PHLX Semiconductor Index on the closest month end date of February 29, 2012, and assume reinvestment of dividends. The comparisons in the graph are historical and are not intended to forecast or be indicative of possible future performance of our common stock.

Issuer Purchases of Equity Securities

42

Table of Contents

ITEM 6. SELECTED FINANCIAL DATA.

You should read the following selected financial data in conjunction with our consolidated financial statements and related notes, as well as Item 1A. “Risk Factors” and Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” appearing elsewhere in this Annual Report.

We acquired Nitronex on February 13, 2014. Because we and Nitronex were under common control since June 25, 2012, we present combined financial statements in a manner similar to a pooling-of-interests for all periods since June 25, 2012, the earliest date of common control. Accordingly, our historical financial statements have been retroactively combined as if Nitronex was acquired on June 25, 2012. All periods from June 25, 2012, have been combined using historical amounts of each entity.

We derived (i) the statements of operations data for the fiscal years 2014, 2013 and 2012, and (ii) the balance sheet data as of October 3, 2014 and September 27, 2013, from our audited consolidated financial statements, which appear elsewhere in this Annual Report. We derived the statements of operations data for the fiscal years 2011 and 2010 and balance sheet data as of September 28, 2012, September 30, 2011 and October 1, 2010 from our audited consolidated financial statements, which do not appear elsewhere in this Annual Report. We adopted a 52-or 53-week fiscal year ending on the Friday closest to September 30.

43

Table of Contents

The historical results presented below are not necessarily indicative of financial results to be achieved in future periods.

44

Table of Contents

Dividends of $0.63 per share, $0.81 per share and $2.44 per share were paid to the record holders as of January 4, 2011 of our Series A-1 convertible preferred stock, Series A-2 convertible preferred stock and common stock, respectively, aggregating $80 million.

45

Table of Contents

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATION.

The following discussion and analysis of our financial condition and results of operations should be read in conjunction with our consolidated financial statements and related notes that appear elsewhere in this Annual Report on Form 10-K. In addition to historical information, the following discussion contains forward-looking statements that are subject to risks and uncertainties. Actual results may differ substantially and adversely from those referred to herein due to a number of factors, including but not limited to those described below and in Item 1A “Risk Factors” and elsewhere in this Annual Report on Form 10-K.

OVERVIEW

We are a leading provider of high-performance analog semiconductor solutions that enable next-generation internet applications, the cloud connected apps economy, and the modern, networked battlefield across the radio frequency (RF), microwave and millimeterwave spectrum. We design and manufacture differentiated, high-value products for customers who demand high performance, quality and reliability. We offer a broad portfolio of over 3,500 standard and custom devices, which include integrated circuits (IC), multi-chip modules, power pallets and transistors, diodes, switches and switch limiters, passive and active components and complete subsystems, across 42 product lines serving over 6,000 end customers in four primary markets. Our semiconductor products are electronic components that our customers incorporate into their larger electronic systems, such as point-to-point wireless backhaul radios, optical networking equipment, high density data networks, radar, automobile navigation systems, magnetic resonance imaging systems and unmanned aerial vehicles. Our primary markets are: Networks, which includes wired broadband, cellular backhaul, cellular infrastructure, enterprise networking, broadcast video transmission and optical communications applications; Aerospace and Defense (A&D), which includes military and commercial radar, RF jammers, electronic countermeasures, and communication data links; Automotive, which includes global positioning (GPS) modules we sell to Ford and Ford affiliates; and Multi-market, which includes industrial, medical, test and scientific applications.

History and Basis of Presentation

M/A-COM Technology Solutions Holdings, Inc. was incorporated in the State of Delaware on March 25, 2009, and on March 30, 2009, acquired 100% of the outstanding stock of M/A-COM Technology Solutions Inc. and M/ACOM Technology Solutions (Cork) Limited and the related M/A-COM brand, which we refer to as the MACOM Acquisition. We acquired Mimix, a supplier of high-performance GaAs semiconductors, on May 28, 2010, Optomai a developer of ICs and modules for fiber optic networks, on April 25, 2011, Mindspeed, a supplier of high-performance analog products, on December 18, 2013, Nitronex, a supplier of high-performance gallium nitride (GaN) semiconductors for RF, microwave and millimeterwave applications on February 13, 2014, and other acquisitions as highlighted in Note 3 of our Consolidated Financial Statements included elsewhere in this Annual Report.

Because we and Nitronex were controlled by the same majority owner since June 25, 2012, we present combined financial statements in a manner similar to a pooling-of-interests for all periods since June 25, 2012, the earliest date of common control. Accordingly, our historical financial statements have been retroactively combined as if Nitronex was acquired on June 25, 2012. All periods from June 25, 2012, have been combined using historical amounts of each entity. Since February 13, 2014, the results of Nitronex are included on a consolidated basis.

On November 17, 2014, we entered into an Agreement and Plan of Merger with BinOptics, a supplier of high-performance laser products, pursuant to which, subject to the satisfaction or waiver of customary closing conditions, BinOptics will become our wholly-owned subsidiary at closing. We believe BinOptics aligns with our core growth strategy in our Networks market, and that it has a high-performance laser semiconductor business model that is consistent with our target model for higher margin products with long product lifecycles.

46

Table of Contents

Further, we believe that BinOptics complements our existing business with an established footprint and customer relationships in the Asia-Pacific region and expands our addressable market for InP high-performance laser products and technology for use in optical networks. The operations of BinOptics will be included in our consolidated financial statements from the date of acquisition.

Subsequent to closing the Mindspeed Acquisition, in February 2014, we divested the wireless business of Mindspeed. The operations of the wireless business are included in discontinued operations.

On May 9, 2014, we completed the sale of the Mindspeed customer premise equipment communication processor (CPE) product line for $12.0 million and a potential additional $2.0 million based upon the achievement of certain revenue related milestones through December 31, 2014.

We have one reportable operating segment, semiconductors and modules. We have a 52 or 53-week fiscal year ending on the Friday closest to September 30. The fiscal year 2014 includes 53 weeks. The fiscal years 2013 and 2012 included 52 weeks. To offset the effect of holidays, we include the extra week arising in our fiscal years in the first quarter.

Description of Our Revenue, Cost of Revenue and Expenses

Revenue. Substantially all of our revenue is derived from sales of high-performance analog semiconductor solutions for use in wireless and wireline applications across the RF, microwave and millimeterwave spectrum and in high-speed communications. We design, integrate, manufacture and package differentiated product solutions that we sell to customers through our direct sales organization, our network of independent sales representatives, and our distributors.

We believe the primary drivers of our future revenue growth will include:

Our core strategy is to develop innovative, high-performance products that address our customers’ most difficult technical challenges in our primary markets: Networks, A&D, Automotive and Multi-market. While sales in any or all of our primary markets may slow or decline from period to period, over the long-term we generally expect to benefit from strength in these markets.

We expect our revenue in the Networks market to be primarily driven by continued upgrades and expansion of communications equipment to support expansion in the internet of things (IoT), driven by the proliferation of mobile computing devices such as smartphones and tablets, coupled with bandwidth rich services such as video on demand and cloud computing, as well as demand for higher bandwidth wired and wireless services, the rapid adoption of cloud-based services and the migration to an application centric architecture, which we expect will drive faster adoption of higher speed, low latency optical and wireless links.

47

Table of Contents

We expect our revenue in the A&D market to be driven by the upgrading of radar applications and modern battlefield communications devices designed to improve situational awareness. Growth in this market is subject to changes in governmental programs and budget funding, which is difficult to predict.

We expect our revenue in the Automotive market to be subject to fluctuations in our largest customer’s market share and overall macroeconomic conditions.

We expect revenue in Multi-market to be driven by diverse demand for our multi-purpose catalog products.

Cost of revenue. Cost of revenue primarily consists of the cost of semiconductor wafers and other materials used in the manufacture of our products, and the cost of assembly and testing of our products, whether performed by our internal manufacturing personnel or outsourced vendors. Cost of revenue also includes costs associated with personnel engaged in our manufacturing operations, such as wages and share-based compensation expense, as well as costs and overhead related to our manufacturing operations, including lease occupancy and utility expense related to our manufacturing operations, depreciation, production computer services and equipment costs and the cost of our manufacturing quality assurance and supply chain activities. Further, cost of revenue includes the impact of warranty and inventory adjustments, including write-downs for excess and obsolete inventory, and for fair market value adjustments related to the accounting for acquisitions, as well as amortization of intangible assets related to acquired technology.

Our gross margin in any period is significantly affected by industry demand and competitive factors in the markets into which we sell our products. Gross margin is also significantly affected by our product mix, that is, the percentage of our revenue in that period that is attributable to relatively higher or lower-margin products. Additional factors affecting our gross margin include fluctuations in the cost of wafers and materials, including precious metals, utilization of our wafer fabrication operation, level of usage of outsourced manufacturing, assembly, and test services, changes in our manufacturing yields, changes in foreign currencies, and numerous other factors, some of which are not under our control. As a result of these or other factors, we may be unable to maintain or increase our gross margin in future periods, and our gross margin may fluctuate from period to period.

Research and development. R&D expense consists primarily of costs relating to our employees engaged in the design and development of our products and technologies, including wages and share-based compensation. R&D expense also includes costs for consultants, facilities, services related to supporting computer design tools used in the engineering and design process, prototype development and project materials. We expense all research and development costs as incurred. We expect to maintain or increase the dollar amount of R&D investment in future periods as we continue to invest in new product development, although amounts may increase or decrease in any individual quarter.

Selling, general and administrative. SG&A expense consists primarily of costs of our management, sales and marketing, finance, human resources and administrative organizations, including wages and share-based compensation. SG&A expense also includes costs associated with being a public company, professional fees, sales commissions paid to independent sales representatives, costs of advertising, trade shows, marketing, promotion, travel, occupancy and equipment costs, computer services costs, costs of providing customer samples, amortization of certain acquisition-related intangible assets relating to customer relationships and costs and expenses to acquire businesses.

Contingent consideration. Contingent earn-out consideration represents expense in which we have agreed to pay contingent amounts to the previous owners of acquired businesses based upon those businesses achieving contractual milestones. We record these obligations as liabilities at fair value and any changes in fair value are reflected in our earnings. As of October 3, 2014, we had approximately $0.8 million of outstanding earn-out obligations.

48

Table of Contents

Restructuring charges. Restructuring expense consists of severance and related costs incurred in connection with reductions in staff relating to initiatives designed to lower our manufacturing and operating costs and integrate acquired businesses, including restructuring actions taken following the Mindspeed and Nitronex acquisitions.

Other income (expense). Other income (expense) consists of our stock warrant liability expense and/or gain, interest expense, income from transition services provided related to sales of businesses and assets, and income from our administrative and business development services agreement with GaAs Labs, which is one of our stockholders and an affiliate of our directors and majority stockholders John and Susan Ocampo. We expect interest expense to be higher in future periods due to increased borrowing to fund the Mindspeed, Nitronex and expected BinOptics acquisitions, as well as to provide additional liquidity.

CRITICAL ACCOUNTING POLICIES AND ESTIMATES

Our discussion and analysis of our financial condition and results of operations are based on our consolidated financial statements. The preparation of financial statements, in conformity with generally accepted accounting principles in the U.S. (GAAP), requires management to make estimates and judgments that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. By their nature, these estimates and judgments are subject to an inherent degree of uncertainty. On an ongoing basis, we re-evaluate our estimates and judgments. We base our estimates and judgments on our historical experience and on other assumptions that we believe are reasonable under the circumstances, the results of which form the basis for making the judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. The accounting policies which our management believes involve the most significant application of judgment, or involve complex estimation, include revenue recognition, inventory valuation, share-based compensation, income tax expense and deferred tax accounting, fair value measurements and impairment of long-lived assets. Actual results could differ from those estimates, and material effects on our operating results and financial position may result.

As discussed in Part I, Item 1A. “Risk Factors”, as an emerging growth company and pursuant to Section 102(6)(1) of the JOBS Act, we have elected to delay adoption of new or revised accounting standards that have different effective dates for public and private companies until those standards apply to private companies, and thus our financial statements may not be comparable to those of other companies that comply with public company effective dates.

Revenue recognition. We recognize revenue when: (i) there is persuasive evidence that an arrangement exists; (ii) delivery has occurred or services have been rendered; (iii) the price is fixed or determinable; and (iv) collectability is reasonably assured. In circumstances with our distribution customers where we are unable to establish that certain sales prices are fixed and determinable, we defer the recognition of revenue, and the related costs, under agreements providing for rights of return and price protection until such time as our products are sold by the distributors to their customers. As of October 3, 2014, we have deferred revenue of $17.0 million and related cost of $4.6 million. In circumstances with distributor customers where returns are reasonably estimable and the sales price is fixed and determinable, we recognize revenue with the transfer of title and risk of loss, and provide for reserves for returns and other allowances. Historically, such returns and allowances have not been material based on the terms of our arrangements. We generally do not provide customers other than distributors the right to return product, with the exception of warranty related matters. Accordingly, we do not generally maintain a reserve for sales returns for such customers.

Inventory valuations. Inventory is stated at the lower of cost or market. We use a combination of standard cost and moving weighted-average cost methodologies to determine the cost basis for inventories, approximating a first-in, first-out basis. The standard cost of finished goods and work-in-process inventory is composed of material, labor and manufacturing overhead, which approximates actual cost. In addition to stating inventory at

49

Table of Contents

the lower of cost or market, we also evaluate inventory each quarter for excess quantities and obsolescence, establishing reserves when necessary based upon historical experience, assessment of economic conditions, and expected demand. Estimating demand is inherently difficult, particularly given the cyclical nature of the semiconductor industry, and can result in excess or obsolete inventory. Once we write down inventory to its estimated net realizable value, we establish a new cost basis for that item and do not increase its carrying value due to subsequent changes in demand forecasts. Accordingly, if inventory previously written down is subsequently sold, we may realize higher than normal gross margin on these transactions. Neither inventory write-downs nor sales of previously written down inventory had a material impact on our operating results for any period presented in this Annual Report.

Share-based compensation. We provide share-based compensation awards to our directors, officers and employees as incentives in the form of options to purchase our common stock (stock options), restricted shares of our common stock (restricted stock) and units representing the right to receive common stock (restricted stock units), typically subject to a time-based or performance-based vesting restrictions. We measure compensation cost for such awards based upon fair value on the date of grant, and recognize this cost as expense over the service period the awards are expected to vest, net of estimated forfeitures. The fair value of restricted stock and restricted stock units is determined based on the excess of the estimated fair value of our common stock on the date of grant over the price paid or payable for the shares, which is generally zero. The fair value of stock options is determined using the Black-Scholes option-pricing model. We recognize the compensation expense associated with share-based awards on a straight-line basis over the requisite service period of the award, which is generally the vesting period. The determination of fair value of share-based awards utilizing the Black-Scholes model is affected by the fair value of our common stock as of the time of grant and a number of assumptions, including expected volatility, expected life, risk-free interest rate, and expected dividends.

Determining the appropriate fair value model and calculating the fair value of share-based awards requires significant judgment and the use of assumptions which may differ materially from actual results. Actual results, and future changes in estimates, may differ substantially from our current estimates.

Income taxes expense and deferred tax accounting. We periodically assess the likelihood that our deferred tax assets will be recovered from our future income, and, to the extent we believe that it is more likely than not our deferred tax assets will not be recovered, we must establish a valuation allowance against our deferred tax assets. In making this assessment, we consider available positive and negative evidence. Conclusions reached are subject to significant judgments that are dependent upon changes in facts and circumstance. We acquired significant federal net operating loss (NOL) carryforwards in our acquisition of Mindspeed, approximately $307.0 million after consideration of change in control limitations within the Internal Revenue Code. We have concluded that recovery of these NOL carryforwards is more likely than not and recognized these deferred tax assets in our accounting for the business combination, without a valuation allowance. Our assessment of recovery is based in part on our assumption of generating taxable income in future periods through 2033. To the extent this assumption changes and we conclude that recovery in whole or in part is not more likely than not, we will need to provide a valuation allowance which will decrease our net income.

Fair value measurements. We measure financial assets and liabilities at fair value. Fair value is an exit price, representing the amount that would be received from the sale of an asset or paid to transfer a liability in an orderly transaction between market participants. As such, fair value is a market-based measurement that should be determined based on assumptions that market participants would use in pricing an asset or liability. As a basis for considering such assumptions, we group financial assets and liabilities in a three-tier fair value hierarchy. This hierarchy requires us to use observable market data, when available, and to minimize the use of unobservable inputs when determining fair value. On a recurring basis, we measure certain financial assets and liabilities at fair value.

50

Table of Contents

The fair values of the contingent consideration liabilities are estimated based upon a risk-adjusted present value of the probability-weighted expected payments by us. Specifically, we consider base, upside and downside scenarios for the operating metrics upon which the contingent payments are to be based. Probabilities were assigned to each scenario and the probability-weighted payments are discounted to present value using risk-adjusted discount rates.

These estimates include significant judgments about potential future liquidity events and actual results could materially differ and have a material impact upon the values of the recorded liabilities. Any changes in the estimated fair values of the liabilities in the future will be reflected in our earnings and such changes could be material.

Impairment of long-lived assets. We evaluate long-lived assets for recoverability when events or changes in circumstances indicate that their carrying amounts may not be recoverable. In evaluating an asset for recoverability, we estimate the undiscounted cash flows expected to result from our use and eventual disposition of the asset. If the sum of the expected undiscounted cash flows is less than the carrying amount of the asset, an impairment loss, equal to the excess of the carrying amount over the fair value of the asset, is recognized. There was no impairment of long-lived assets in any period presented. As a result of our fiscal 2014 acquisitions, we had approximately $142.6 million of intangible assets as of October 3, 2014. To the extent that our assumptions about generation of future cash flows change, we could possibly be required to record a material impairment of intangible assets.

Goodwill is also subject to an annual impairment test, or more frequently, if indicators of potential impairment arise. We perform the two-step goodwill impairment test. In fiscal years 2014 and 2013, we conducted step I of the quantitative goodwill impairment test, and concluded that there was no goodwill impairment and that the performance of the step II testing was not necessary.

51

Table of Contents

RESULTS OF OPERATIONS

We acquired Nitronex on February 13, 2014. Given that we and Nitronex were under common control since June 25, 2012, we present combined financial statements in a manner similar to a pooling-of-interests for all periods since June 25, 2012, the earliest date of common control. Accordingly, our historical financial statements have been retroactively combined as if Nitronex was acquired on June 25, 2012. All periods from June 25, 2012, have been combined using historical amounts of each entity. The following table sets forth, for the periods indicated, our statement of operations data (in thousands):