MANITOWOC CO INC - Annual Report: 2021 (Form 10-K)

Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

☒ Annual Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

For the fiscal year ended December 31, 2021

or

☐ Transition Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

For the transition period from to

Commission File Number 1-11978

The Manitowoc Company, Inc.

(Exact name of registrant as specified in its charter)

(414) 760-4600

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities Registered Pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐ No ☒

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the Registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The Aggregate Market Value on June 30, 2021, of the registrant’s Common Stock held by non-affiliates of the registrant was approximately $840.8 million based on the closing per share price of $24.50 on that date.

The number of shares outstanding of the registrant’s Common Stock as of January 31, 2022, the most recent practicable date, was 35,056,252.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the registrant’s Proxy Statement for the 2022 Annual Meeting of Shareholders, are incorporated by reference in Part III of this Annual Report on Form 10-K.

Table of Contents

THE MANITOWOC COMPANY, INC.

Index to Annual Report on Form 10-K

For the Year Ended December 31, 2021

2

Table of Contents

Cautionary Statements Regarding Forward-Looking Information

All of the statements in this Annual Report on Form 10-K, other than historical facts, are forward-looking statements, including, without limitation, the statements made in the “Management's Discussion and Analysis of Financial Condition and Results of Operations.” As a general matter, forward-looking statements are those focused upon anticipated events or trends, expectations and beliefs relating to matters that are not historical in nature. The words “could,” “should,” “may,” “feel,” “anticipate,” “aim,” “preliminary,” “expect,” “believe,” “estimate,” “intend,” “intent,” “plan,” “will,” “foresee,” “project,” “forecast,” or the negative thereof or variations thereon, and similar expressions identify forward-looking statements.

The Private Securities Litigation Reform Act of 1995 provides a “safe harbor” for these forward-looking statements. In order to comply with the terms of the safe harbor, The Manitowoc Company, Inc. (the “Company” or “Manitowoc”) notes that forward-looking statements are subject to known and unknown risks, uncertainties and other factors relating to the Company's operations and business environment, all of which are difficult to predict and many of which are beyond the control of the Company. These known and unknown risks, uncertainties and other factors could cause actual results to differ materially from those matters expressed in, anticipated by or implied by such forward-looking statements. These risks, uncertainties and other factors include, but are not limited to:

3

Table of Contents

These statements reflect the current views and assumptions of management with respect to future events. Except to the extent required by the federal securities laws, the Company does not undertake, and hereby disclaims, any duty to update these forward-looking statements, even though its situation and circumstances may change in the future. Readers are cautioned not to place undue reliance on forward-looking statements, which speak only as of the date of this report. The inclusion of any statement in this report does not constitute an admission by the Company or any other person that the events or circumstances described in such statement are material.

4

Table of Contents

PART I

Item 1. BUSINESS

General

The Manitowoc Company, Inc. (“Manitowoc” or the “Company”) was founded in 1902 and has over a 119-year tradition of providing high-quality, customer-focused products and support services to its markets. Manitowoc is one of the world's leading providers of engineered lifting solutions. Manitowoc, through its wholly-owned subsidiaries, designs, manufactures, markets, and supports comprehensive product lines of mobile hydraulic cranes, lattice-boom crawler cranes, boom trucks, and tower cranes under the Aspen Equipment, Grove, Manitowoc, MGX Equipment Services, National Crane, Potain and Shuttlelift brand names. The Company has three reportable segments, the Americas segment, Europe and Africa (“EURAF”) segment and Middle East and Asia Pacific (“MEAP”) segment. The segments were identified using the “management approach,” which designates the internal organization that is used by management for making operating decisions and assessing performance. Refer to Note 18, “Segments” for additional information.

Unless otherwise indicated, references to Manitowoc, the Company, we, our and us refer to The Manitowoc Company, Inc. and its consolidated subsidiaries.

The Manitowoc Way

Manitowoc’s culture is built around our Vision: Manitowoc plays an integral role in building physical communities for future generations. Integral to this vision is our Mission to develop reliable and innovative lifting solutions backed by expert service and support. Our Core Values are the guiding principles of our employees to ensure that we meet our Vision and Mission. These Core Values include (1) doing what is right; (2) working as a team; (3) delivering results, and (4) acting as a role model.

Encompassing these core values, The Manitowoc Way is our business system for executing our Vision and Mission. The Manitowoc Way is our continuous improvement system – focused on delivering value to our customers, shareholders, and employees. Customers are the priority of The Manitowoc Way as we build strong relationships by listening to them, understanding their needs and quickly responding with creative products and services. Employee commitment to our Core Values, Vision and Mission enables us to use shareholder invested resources to create a stronger organization.

The Manitowoc Way has played a critical role in Manitowoc’s success over the last six years to build a sustainable, stand-alone crane company, helping us to significantly reduce our cost basis. As we transition to a strategy based on growth, The Manitowoc Way will remain our guiding force for building processes that enhance our new production development; sales strategies; service and rental operations; and acquisition integration.

Products and Aftermarket Services

We design, manufacture and distribute a diversified line of crawler-mounted lattice-boom cranes, which we sell under the Manitowoc brand name. We also design, manufacture and distribute an expansive line of top-slewing and self-erecting tower cranes, which we sell under the Potain brand name. We design, manufacture and distribute mobile hydraulic cranes, which we sell under the Grove, Shuttlelift and National Crane brand names. We also provide crane product parts and services and crane rebuilding, remanufacturing and training services. We continue to expand our tower crane rental fleet in Europe to directly serve our customers in the region. Through our recent acquisitions in the Americas, we expanded our aftermarket activities within the region. Our crane products are used in a wide variety of applications throughout the world, including energy production/distribution and utility, petrochemical and industrial, infrastructure, such as road, bridge and airport construction, as well as commercial and residential construction.

We sell our entire product offering and full line of services in most regions of the world. Moreover, we report under a geographic reporting structure to better align with the location of our customers and the unique market dynamics of each geographic region. The main products we sell are:

Lattice-boom crawler cranes. Under the Manitowoc brand name, we design, manufacture, market and sell lattice-boom crawler cranes. Lattice-boom crawler cranes weigh less and provide higher lifting capacities than a mobile telescopic crane of similar boom length. The lattice-boom crawler cranes are the only category of crane that can pick and move simultaneously with a full-rated load. The lattice-boom sections, together with the crane base, are transported to and erected at a project site. We offer our lattice-boom crawler crane customers various attachments that provide our cranes with greater capacity in terms of height, movement and lifting.

5

Table of Contents

These cranes are used to lift material and equipment in a wide variety of applications, including heavy construction, bridge and highway, infrastructure and energy-related projects. These cranes are also used by the crane rental industry, which serves all the aforementioned end markets. Lattice boom crawler cranes are produced in the U.S.

Tower cranes. Under the Potain brand name, we design, manufacture, market, rent and sell tower cranes primarily used in the commercial and residential construction end markets. Tower cranes offer the ability to lift and distribute material at the point of use, more quickly and accurately than other types of lifting machinery, without utilizing substantial square footage on the ground. We offer a complete line of tower crane products, including top slewing, luffing jib, topless, self-erecting and special cranes for large building projects.

Top-slewing tower cranes are the most traditional category of tower cranes and have a tower and multi-sectioned horizontal jib. These cranes rotate from the top of their mast and can increase in height with the project. These cranes are generally sold to medium to large building and construction groups, as well as to rental companies. There are three styles of Top-Slewing Tower Cranes: Hammerhead/cathead; Topless; and Luffing Jib. These cranes are produced in France, Portugal, India and China.

Self-erecting tower cranes are bottom-slewing cranes which have a counterweight located at the bottom of the mast and are able to be erected, used and dismantled on job sites without assist cranes. Self-erecting tower cranes are mounted on axles or transported on a trailer. The lower segment of the range unfolds in four sections, two for the mast and two for the jib. Self-erecting cranes rotate from the bottom of their mast and are utilized primarily in low to medium rise construction and residential applications. Self-erecting tower cranes are produced in France and Italy.

Mobile hydraulic cranes. Under the Grove, Shuttlelift and National Crane brand names, we design, manufacture, market and sell mobile hydraulic cranes utilized in industrial, commercial, construction and maintenance applications. Mobile hydraulic cranes consist of a telescopic boom mounted on a carrier with the ability to easily move in or between job sites, with some permitted on public roadways. We currently offer the following six types of mobile hydraulic cranes: rough-terrain, all-terrain, truck-mounted, telescopic crawler, industrial and boom truck.

Rough-terrain cranes are designed to lift materials and equipment on rough or uneven terrain, and their versatility allows them to carry out many different lifts within the boundaries of given sites. These cranes cannot be driven on public roadways, and, accordingly, must be transported by truck to a job site. Rough-terrain cranes are produced in the U.S. and Italy and sold under the Grove brand name.

All-terrain cranes are versatile cranes designed to perform a wide range of lifts on rough or uneven terrain. These cranes are highly maneuverable and roadable at highway speeds. All-terrain cranes are produced in Germany and sold under the Grove brand name.

Truck-mounted cranes provide simple set-up, long reach, high capacity booms and are roadable at highway speeds. These cranes are produced in the U.S and sold under the Grove brand name.

Telescopic crawler cranes consist of a telescopic boom superstructure mounted on a crawler crane chassis. These cranes are purchased as complete units from a strategic manufacturing partner and sold under the Grove brand name.

Industrial cranes are designed primarily for plant maintenance, storage yard and material handling applications. These cranes allow for lifting and carrying loads on a smooth, flat surface. These cranes are manufactured in the U.S. and sold under the Grove and Shuttlelift brand names.

We offer our hydraulic boom truck products under the National Crane brand name. A boom truck is a hydraulically powered telescopic crane mounted on a conventional truck chassis. Hydraulic boom trucks are used primarily for lifting material on a job site. These cranes are produced in the U.S.

Aftermarket Services

We provide aftermarket services such as sale of parts, commissioning and disassembly of cranes, training, remanufacturing services, field service work and routine maintenance of cranes. Our strategic priorities involve expanding our aftermarket businesses in North America and Europe. In 2021, we completed the acquisitions of Aspen Equipment Company ("Aspen") and the crane business of H&E Equipment Services, Inc. (“H&E”), which expanded our aftermarket footprint and capabilities in North America. The H&E crane business operates under our new wholly-owned subsidiary, MGX Equipment Services, LLC ("MGX").

6

Table of Contents

Customers. We did not have any customers that individually comprise more than 10% of our consolidated net sales in the years ended December 31, 2021, 2020 and 2019.

Manufacturing

We operate ten manufacturing facilities (including remanufacturing facilities) across the world that utilize a variety of processes. In general, the manufacturing process involves the fabrication and machining of raw materials, primarily steel, which are then manufactured into sub-assemblies. Sub-assemblies are then assembled with purchased components into a complete machine. In our manufacturing operations, we maintain advanced manufacturing, quality assurance and testing equipment and utilize extensive process automation. We have invested in Product Verification Centers at our major manufacturing facilities to support new product development, testing and qualification of sub-systems and final product designs.

We train employees dedicated to leading the implementation of The Manitowoc Way, a business system that seeks to enhance customers' experiences with our products and services. Our team is comprised of individuals with diverse backgrounds in operations, quality, lean principles, finance, product and process engineering. The Manitowoc Way includes lean tools to eliminate waste from processes to provide better value for customers, and is used to assess customer satisfaction and implements measures to improve the customer experience. The Manitowoc Way improvement projects have contributed to manufacturing efficiency gains, materials management improvements, steady quality improvements and reduction of lead times, as well as enabling us to free up manufacturing space.

Acquisitions

In 2021, we completed the acquisition of substantially all of the assets of Aspen, a diversified crane dealer and a leading final stage purpose built work truck upfitter, and substantially all of the assets of the crane business of H&E, one of the largest rental equipment companies in the U.S.

The acquisition of these businesses advances our strategy to expand our aftermarket activities within North America. The acquisition of Aspen expands Manitowoc’s direct-to-customer footprint in key markets in the Midwest with new sales, used sales, parts and service to a variety of end markets. In addition, Aspen’s specialized crane and truck equipment upfitting capabilities provide greater depth of product offerings to a wider base of customers including loyal customers of the Company's products. The H&E crane business operates under our new wholly-owned subsidiary, MGX Equipment Services, LLC ("MGX"). MGX expands our ability to provide new sales, used sales, aftermarket parts, service, and remanufacturing to a variety of end market customers. In addition, MGX and Aspen rent cranes to its customers and the rental fleet is serviced through the Company’s on-site parts and service team. Together, Aspen and MGX include fourteen full-service branch locations along with field service technicians that provide industry-leading technical competencies and exceptional customer support.

Raw Materials and Supplies

We purchase a wide variety of raw materials to manufacture our products. Our primary raw materials are structural and rolled steel, which are purchased from various suppliers from around the world. We also purchase engines and electrical equipment and other semi- and fully-processed materials. Our policy is to maintain alternate sources of supply for our critical materials and parts wherever possible, and by doing so, we mitigate the risk of being dependent on a single source for any particular raw material or supply.

Patents, Trademarks, and Licenses

We utilize patent rights to protect our intellectual property and our position as a leading provider of engineered lift solutions. We hold numerous patents across the world pertaining to our products and also have pending applications for additional patents. In addition, we have various registered and unregistered trademarks, copyrights and licenses. We believe our patents, trademarks and copyrights are adequately protected in customary fashions under applicable laws. We actively enforce our patents, trademarks and copyrights.

Seasonality

Our first quarter is typically the slowest quarter of the year for net sales due to seasonal conditions in the northern hemisphere impacting customer buying behavior.

7

Table of Contents

Competition

We sell our products in highly competitive end markets. We compete in each of our end markets based on product design, quality of products, aftermarket support services, product performance, maintenance costs, energy and resource savings and other contributions to sustainability and price. Given the expense operational disruption can cause, our customers generally view quality and reliability as critical factors in their purchasing decision. We believe that we benefit from the following competitive advantages which create customer loyalty: strong brand names with competitive resale values, a reputation for quality and reliable products and aftermarket support and solution services, an established network of global distributors and customer relationships, broad product line offerings in the markets we serve, a commitment to customer-focused engineering design and product innovation and in-house service and distribution. The following table sets forth our primary competitors:

Engineering, Research and Development

We believe our extensive engineering, research and development capabilities are key drivers of our success. We engage in research and development activities at dedicated locations. We have a staff of in-house engineers and technicians on three continents, supplemented with external engineering resources, who are responsible for improving our existing products and developing new products.

Our team of engineers focuses on developing high performance, low maintenance, innovative products intended to create significant brand loyalty among customers. Design engineers work closely with our manufacturing and marketing staffs and our customers, enabling us to identify changing end-user requirements, implement new technologies and effectively introduce product innovations. Closely managed relationships with dealers, distributors and end users help us identify their needs, not only for products, but for the service and support that are critical to their profitable operations. As part of our ongoing commitment to provide superior products, we intend to continue our efforts to design products that meet evolving customer demands and reduce the period from product conception to product introduction.

Human Capital Management

As of December 31, 2021, we employed approximately 4,600 people worldwide, of which approximately 1,600 were employed in the United States and approximately 3,000 employed outside the United States. A large majority of our European employees belong to various European trade unions. Additionally, we have one trade union in China, one trade union in India and two trade unions in North America. Approximately 55 employees are members of trade unions in North America.

Health and Safety: The health and safety of our employees is our number one priority. To track the health and safety performance across our global manufacturing locations we utilize a mixture of leading and lagging indicators. The two lagging indicators we focus on is the Recordable Injury Rate (“RIR”) and Loss Time Injury Frequency Rate (“LTIFR”). These are calculated in line with the United States Department of Labor Occupational Safety and Health Administration standards. The following results include the impact of the acquisitions. In 2021, our year end RIR was 1.54 whereas the industry average as per the U.S. Bureau of Labor and Statistics was 3.6 and our LTIFR stood at 1.02 versus the industry average of 1.0. In 2021, we recorded zero fatalities within our operations. In addition to our focus on lagging indicators, we have developed pro-active programs to track our leading indicators. Our leading indicators include reporting of “near misses” and daily hazard observations through our “SLAM” (Stop-Look-Assess-Manage) and “Interactive Observation” Programs. In 2021, we recorded 58,102 SLAMs and Interactive Observations which had a positive effect on our RIR and LTIFR helping our workforce to identify hazards and implement pro-active mitigation measures to avoid injury or loss.

Diversity: We strive to create diverse and inclusive workplaces where all our team members can perform to their full potential. We place particular emphasis on developing our people and building a deep and diverse talent pool to ensure Manitowoc’s sustained success over the long-term. As stewards of our diversity and inclusion initiatives, our leadership team takes a proactive approach to build and develop a diverse pipeline of talent. The Company's Future Leader Mentoring Program is a reoccurring 18-month program partnering our key talent with the Company's leadership, to develop talent and identify our

8

Table of Contents

future leaders from within the enterprise. The first cohort of this program was designed to accelerate the development of female leaders in the organization, increase retention and create a strong pool of talent to take on more prominent roles in the future. The second cohort, launching in the first quarter of 2022, centers around the development of future leaders while maintaining a focus on accelerating the development of female leaders; two out of every three participants are female.

Training and Talent Development: We provide all Manitowoc employees with a wide range of professional development opportunities throughout their careers. Programs designed to help our employees effectively perform their duties include our training courses in: environmental health and safety, welding apprenticeships, sales skills development, Lean manufacturing methodologies, The Manitowoc Way and corporate compliance (Ethics & Code of Conduct, Diversity & Inclusion, Insider Trading and Workplace Harassment, among others). The Company also provides tuition reimbursement and routinely invests in seminars, conferences, and other training or continuing education for employees. Additionally, the CEO and EVP, Human Resources conduct annual global succession planning meetings with senior leadership and the Board of Directors to review the Company’s top talent. We have implemented several programs to support the ongoing development of the Company’s top talent including: a mentorship program which includes a focus on developing female leaders, a supervisor leadership development program and ongoing individual development programs designed to build the leadership capabilities of our existing and future leaders.

Available Information

We make available, free of charge, at our website (www.manitowoc.com), our Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, our proxy statements and any amendments to those reports, as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission (“SEC”). Although some documents available on our website are filed with the SEC, the information generally found on our website is not part of this or any other report we file with or furnish to the SEC.

The SEC also maintains electronic versions of our reports on its website at www.sec.gov.

Item 1A. RISK FACTORS

The Company's financial position, results of operations and cash flows are subject to various risks, many of which are not exclusively within the Company's control, which may cause actual performance to differ materially from historical or projected future performance. Investors should consider carefully information in this Annual Report on Form 10-K in light of the risk factors described below.

Risks Relating to Our Business, Operations and Industry

The COVID-19 pandemic has had, and will continue to have, a negative impact on our business, financial condition, cash flows, results of operations and supply chain.

The COVID-19 pandemic resulted in national, state and local government authorities implementing numerous measures to try to contain the virus, such as travel bans and restrictions, border closings, restrictions on public gatherings, quarantining of people who may have been exposed to the virus, shelter-in-place restrictions, and limitations or shutdowns of business operations. These measures, some of which are continuing or being re-implemented in light of new variants of the virus, have impacted and may further impact our workforce and operations, the operations of our customers, and those of our dealers and suppliers. We have significant operations worldwide, including in the United States, France, Germany, Portugal, Italy and China and each of these countries have been affected by the pandemic and have taken measures to try to contain it, resulting in disruptions at some of our manufacturing facilities and support operations. There is still uncertainty regarding the full impact and duration of such measures and potential future measures, and restrictions on our access to our facilities or on our support operations or workforce, or similar limitations for our customers, dealers and suppliers.

The COVID-19 pandemic has disrupted our supply chain and resulted in associated cost and labor pressures as well as delays in scheduled shipments of our products. The COVID-19 pandemic has had, and will continue to have, a negative impact on our business, financial condition, cash flows, results of operations and supply chain, although the full extent is still uncertain. As the pandemic continues to evolve and new variants continue to emerge, the extent of the impact on our business, financial condition, cash flows, results of operations and supply chain will depend on future developments, including, but not limited to, the continued duration of the pandemic, government actions to contain the virus and/or treat its impact, restrictions on travel, the duration, timing and severity of the impact on customer demand, and how quickly and to what extent normal economic and operating conditions can resume, all of which are still uncertain and cannot be predicted.
 

9

Table of Contents

Because we participate in end markets that are highly competitive, our net sales and profits could decline as we respond, or fail to effectively respond, to competition.

We sell most of our products in highly competitive end markets. We compete in each of those end markets based on product design, quality of products, quality and responsiveness of product support services, product performance, maintenance costs and price. Some of our competitors may have greater financial, marketing, manufacturing and distribution resources than we do. These competitors may, among others:

• respond more quickly to new or emerging technologies;

• have greater name recognition, critical mass or geographic market presence;

• be better able to take advantage of acquisition opportunities;

• adapt more quickly to changes in customer requirements;

• devote greater resources to the development, promotion and sale of their products;

• be better positioned to compete on price for their products, due to any combination of low-cost labor, raw materials, components, facilities or other operating items, or willingness to sell at lower margins than us;

• consolidate with other competitors in the industry which may create increased pricing and competitive pressures on our business; and

• be better able to utilize excess capacity which may reduce the cost of their products or services.

We cannot be certain that our products and services will continue to compete successfully with those of our competitors or that we will be able to retain our customer base or improve or maintain our profit margins on sales to our customers, any of which could materially and adversely affect our financial condition, results of operations and cash flows.

Sales of our products are cyclical and/or are otherwise sensitive to volatile or variable factors. A downturn or weakness in overall economic activity, including as a result of the continuing COVID-19 pandemic, or fluctuations in those other factors can have a material adverse effect on us.

Historically, sales of products that we manufacture and sell have been subject to cyclical variations caused by changes in general economic conditions and other factors. In particular, demand for our products is cyclical and is impacted by the strength of the economy, generally, the availability of financing and other factors, including crude oil prices, that may have an effect on the level of construction activity on an international, national or regional basis, each of which have been and/or continue to be negatively impacted by the COVID-19 pandemic. During periods of expansion in construction activity, we generally have benefited from increased demand for our products. Conversely, during recessionary periods, we have been adversely affected by reduced demand for our products, and challenging conditions can continue well beyond the end of such periods. Furthermore, any future economic recession may impact leveraged companies, such as Manitowoc, more than competing companies with less leverage and may have a material adverse effect on our financial condition, results of operations and cash flows.

Demand for our products also depend in part on federal, state, local and foreign governmental spending and appropriations, including infrastructure, security and defense outlays. Reductions in governmental spending can reduce demand for our products, which in turn, can negatively affect our performance. Our sales depend in part upon our customers’ replacement or repair cycles. Adverse economic conditions, including as a result of the COVID-19 pandemic, have caused and may continue to cause customers to forego or postpone new purchases in favor of repairing existing machinery.

If we are unable to sufficiently adjust to market conditions, among other potential adverse effects on our financial condition, results of operations and cash flows, we could fail to deliver on planned results, fall short of analyst and investor expectations, incur high fixed costs and/or fail to benefit from higher than expected customer demand resulting in loss of market share.
 

Large or rapid increases in the cost of raw materials or components parts, substantial decreases in their availability, or our dependence on particular suppliers of raw materials and component parts could materially and adversely affect our operating results.

We use large amounts of steel, among other items, in the manufacture of our products. Occasionally, market prices of some of our key raw materials increase significantly, including as a result of tariffs or other trade barriers. If in the future we are not

10

Table of Contents

able to reduce product costs in other areas or pass raw material price increases on to our customers, our margins could be adversely affected. In addition, because we maintain limited raw material and component inventories, even brief unanticipated delays in delivery by suppliers - including those due to capacity constraints, labor disputes, impaired financial condition of suppliers, epidemics, pandemics like COVID-19, other infectious diseases, weather emergencies or other natural disasters - may impair our ability to satisfy our customers and could adversely affect our financial performance.

The Company purchases one branded crane and parts under strategic alliances from third-party suppliers which are then sold into our markets. If we are not able to effectively manage pricing from these suppliers, our financial performance could be adversely affected. Likewise, if our suppliers terminate these agreements and we are unable to procure alternate products at substantially similar competitive pricing, our financial performance could be adversely affected.

Unfair foreign competition could adversely affect our financial results.

Many of our foreign competitors benefit from government policies that could give them a competitive advantage in the United States, including currency devaluation and erecting trade barriers that prevent American manufacturers from selling cranes in those markets. Low-cost competition from China and other developing markets could also result in decreased demand for our products. If competition in our industry intensifies or if our current competitors lower their prices for competing products, we may lose sales or be required to lower the prices we charge for our products, which may undermine our ability to generate returns on our investments.

If we fail to identify, manage, complete and appropriately integrate acquisitions, strategic alliances, joint ventures or other significant transactions, it may adversely affect our future results.

We completed two acquisitions in 2021 and expect to continue to pursue acquisitions, strategic alliances, joint ventures or other significant transactions. In order to pursue this strategy successfully, we must identify attractive acquisitions, strategic alliances, joint venture opportunities, potentially obtain financing for future acquisitions on satisfactory terms, successfully complete the transaction, some of which may be large and complex, and manage post-closing issues such as integration of the acquired company or employees. We may not be able to identify or complete appealing acquisition, strategic alliance or joint venture opportunities given the intense competition for these transactions. Even if we identify and complete suitable transactions, we may not be able to successfully address inherent risks in a timely manner, or at all. These inherent risks include, among other things: failure to achieve all or any projected synergies, performance targets or other anticipated benefits of the acquisition, strategic alliance, joint venture; failure to successfully integrate the purchased operations, technologies, products or services and maintain uniform standard controls, policies and procedures; incur substantial unanticipated integration costs; lose key employees, including those of an acquired business; diversion of management’s attention from other business concerns; failure to retain the customers of the acquired business; additional debt and/or assumption of known or unknown liabilities; potential dilutive issuances of equity securities; and a write-off of goodwill, customer lists, other intangibles and amortization of expenses. If we fail to successfully integrate an acquisition, we may not realize all or any of the anticipated benefits of the acquisition, and our future results of operations could be adversely affected.

We depend on our key executive officers, managers and skilled personnel and may have difficulty retaining and recruiting qualified employees.

Our success depends to a large extent upon the continued services of our executive officers, senior management personnel, managers and other skilled personnel and our ability to recruit and retain skilled personnel to maintain and expand our operations. We could be affected by the loss of any of our executive officers who are responsible for formulating and implementing our business plan and strategy. In addition, we need to recruit and retain additional management personnel and other skilled employees. However, competition is high for skilled technical personnel among companies that rely on engineering and technology, especially in light of the labor pressures resulting from the COVID-19 pandemic, and the loss of qualified employees or an inability to attract, retain and motivate additional skilled employees required for the operation and expansion of our business could hinder our ability to conduct design, engineering and manufacturing activities successfully and develop marketable products. We may not be able to attract the skilled personnel we require or retain those whom we have trained at our own cost. If we are not able to do so, our business and our ability to continue to grow could be negatively affected and we could face additional competition from those employees who leave and work for our competitors.

11

Table of Contents

We may not be able to maintain our engineering, technological and manufacturing expertise.

The markets for our products are characterized by changing technology and evolving process development. The continued success of our business will depend upon our ability to:

• hire, retain and expand our pool of qualified engineering and technical personnel;

• maintain technological leadership in our industry;

• successfully anticipate or respond to changes in manufacturing processes in a cost-effective and timely manner; and

• successfully anticipate or respond to changes in cost to serve in a cost-effective and timely manner.

We cannot be certain that we will develop the capabilities required by our customers in the future. The emergence of new technologies, industry standards or customer requirements may render our equipment, inventory or processes obsolete or uncompetitive. We may have to acquire new technologies and equipment to remain competitive. The acquisition and implementation of new technologies and equipment may require us to incur significant expense and capital investment, which could reduce our margins and affect our operating results. When we establish new facilities, we may not be able to maintain or develop our engineering, technological and manufacturing expertise due to a lack of trained personnel, effective training of new staff or technical difficulties with machinery. Failure to anticipate and adapt to customers’ changing technological needs and requirements or to hire and retain a sufficient number of engineers and maintain engineering, technological and manufacturing expertise may have a material adverse effect on our business.

An inability to successfully manage information systems, or to adequately maintain these systems and their security, as well as to protect data and other confidential information, could adversely affect our business and reputation.

In the ordinary course of business, we collect and store sensitive data and information, including our proprietary and regulated business information and that of our customers, suppliers and business partners, as well as personally identifiable information about our employees. We depend on our information systems to successfully manage our business. We have taken steps to maintain adequate data security by implementing cyber security technologies, internal controls, and network and data center resiliency and recovery processes. However, any inability to successfully manage these systems, including matters related to system and data security, privacy, reliability, compliance, performance and access, as well as any inability of these systems to fulfill their intended purpose within our business, could have an adverse effect on our business.

Despite our efforts, our information systems, like those of other companies, are susceptible to damage or interruption due to natural disasters, power loss, telecommunications failures, viruses, breaches of security, system upgrades or new system implementations. Furthermore, like the cybersecurity incident that occurred in June 2021, our security measures may not detect or prevent all security threats, whether from intentional or inadvertent breaches by our employees or attacks designed to gain unauthorized access to our systems, networks and data, such as denial-of-service attacks, viruses, malicious software, break-ins, phishing attacks, social engineering, security breaches or other attacks and similar disruptions. Any operational failure or breach of security from increasingly sophisticated cyber threats could lead to the loss or disclosure of both our and our customers’ financial, product and other confidential information, result in regulatory actions and legal proceedings, and/or have an adverse effect on our business and reputation.

Any disruption in our information systems could disrupt our operations and would be adverse to our business and financial operations.

We depend on various information systems to support our customers’ requirements and to successfully manage our business, including managing orders, suppliers, accounting controls and payroll. Any inability to successfully manage the procurement, development, implementation or execution of our information systems and back-up systems, including matters related to system security, reliability, performance and access, as well as any inability of these systems to fulfill their intended purpose within our business, could have an adverse effect on our business and financial performance. Such disruptions may not be covered by our business interruption insurance.

We have incurred and may incur in the future additional expenses and delays due to interruptions at our manufacturing facilities as a result of the continuing COVID-19 pandemic, and in the future we may also incur additional expenses and delays due to technical problems or other interruptions at our manufacturing facilities.

Disruptions in operations due to the COVID-19 pandemic, technical problems or other interruptions, such as floods, fire, natural disasters, epidemics, pandemics or other public health crises, have and in the future may adversely affect the

12

Table of Contents

manufacturing capacity of our facilities. Such interruptions have caused, and in the future could cause, delays in production and cause us to incur additional expenses such as charges for expedited deliveries for products that are delayed. Additionally, our customers may have the ability to cancel purchase orders in the event of any delays in production and may decrease future orders if delays are persistent. Additionally, to the extent that such disruptions do not result from damage to our physical property, these may not be covered by our business interruption insurance. Any such disruptions may adversely affect our business, operations, and financial results.

If we do not develop new and innovative products or if customers in our markets do not accept them, our results could be negatively affected.

Our products must be kept current to meet our customers’ needs. To remain competitive, we therefore must develop new and innovative products on an on-going basis. If we fail to make innovations or the market does not accept our new products, our sales and results would likely suffer. We invest significantly in the research and development of new products. These expenditures do not always result in products that will be accepted by the market. To the extent they do not, whether as a function of the product or the business cycle, we will have increased expenses without significant sales to benefit us. Failure to develop successful new products may also cause potential customers to purchase competitors’ products, rather than products manufactured by us.

We have significant manufacturing and sales of our products outside of the United States and such international operations may be subject to a number of risks specific to these countries.

For the years ended December 31, 2021, 2020, and 2019, approximately 61%, 61% and 53%, respectively, of our net sales were attributable to products sold outside of the United States. Expanding the Company’s international sales is part of our growth strategy. Our international operations across many different jurisdictions may be subject to a number of risks specific to these countries, including:

• less flexible employee relationships which can be difficult and expensive to terminate;

• labor unrest;

• political and economic instability (including war and acts of terrorism);

• inadequate infrastructure for our operations (i.e., lack of adequate power, water, transportation and raw materials);

• health concerns and related government actions (including as a result of pandemics like COVID-19);

• risk of governmental expropriation of our property;

• less favorable, or relatively undefined, intellectual property laws;

• unexpected changes in regulatory requirements and laws;

• longer customer payment cycles and difficulty in collecting trade accounts receivable;

• export duties, tariffs, import controls and trade barriers (including quotas);

• adverse trade policies or adverse changes to any of the policies of either the United States or any of the foreign jurisdictions in which we operate;

• adverse changes in tax rates or regulations;

• legal or political constraints on our ability to maintain or increase prices;

• burdens of complying with a wide variety of labor practices and foreign laws, including those relating to export and import duties, environmental policies and privacy issues;

• inability to utilize net operating losses incurred by our foreign operations against future income in the same jurisdiction; and

• economies that are emerging or developing, that may be subject to greater currency volatility, negative growth, high inflation, limited availability of foreign exchange and other risks.

These factors may harm our results of operations, and any measures that we may implement to reduce the effect of volatile currencies and other risks of our international operations may not be effective. In our experience, entry into new international markets requires considerable management time as well as start-up expenses for market development, hiring and establishing

13

Table of Contents

office facilities before any significant revenue is generated. As a result, initial operations in a new market may operate at low margins or may be unprofitable.

We face risks related to sales through distributors and other third parties.

We sell a portion of our products through third parties such as distributors, agents and channel partners (collectively referred to as distributors). Using third parties for distribution exposes us to many risks, including competitive pressure, concentration risk, credit risk, and compliance risks. Distributors may sell products that compete with our products, and we may need to provide financial and other incentives to focus distributors on the sale of our products. We may rely on one or more key distributors for a product, and the loss of these distributors (including as a result of the continuing COVID-19 pandemic) could negatively impact our sales. Distributors may face financial difficulties, including bankruptcy, which could harm our collection of accounts receivable and financial results. Violations of the Foreign Corrupt Practices Act or similar laws by distributors or other third-party intermediaries could have a material impact on our business. Failing to manage risks related to our use of distributors may reduce sales, increase expenses, and weaken our competitive position.

Increasing costs of doing business in many countries in which we operate may adversely affect our business and financial results.

Increasing costs such as labor and overhead costs in the countries in which we operate may erode our profit margins and compromise our price competitiveness. Historically, the low cost of labor in certain of the countries in which we operate has been a competitive advantage but labor costs globally have been increasing. Our profitability also depends on our ability to manage and contain our other operating expenses such as the cost of utilities, factory supplies, factory space costs, equipment rental, repairs and maintenance and freight and packaging expenses. In the event we are unable to manage any increase in our labor and other operating expenses in an environment where revenue does not increase proportionately, our financial results would be adversely affected.

Our operations and profitability could suffer if we experience problems with labor relations.

As of December 31, 2021 we employed approximately 4,600 people worldwide, of which approximately 1,600 were employed in the United States and approximately 3,000 employed outside the United States. A large majority of our European employees belong to various European trade unions. Additionally, we have one trade union in China, one trade union in India and two trade unions in North America. Approximately 55 employees are members of trade unions in North America.

Any significant labor relations issues could have an adverse effect on our operations, reputation, results of operations and financial condition.

Our inability to recover from natural or man-made disasters or public health crises like COVID-19 could adversely affect our business.

Our business and financial results may be affected by certain events that we cannot anticipate or that are beyond our control, such as natural or manmade disasters, epidemics, pandemics like COVID-19 or other public health crises, national emergencies, significant labor strikes, work stoppages, the effects of climate change, political unrest, war or terrorist activities that could curtail production at our facilities and cause delayed deliveries and canceled orders. In addition, we purchase components and raw materials and information technology and other services from numerous suppliers, and, even if our facilities were not directly affected by such events, we have been and in the future could be affected by interruptions at such suppliers. Such suppliers may be less likely than our own facilities to be able to quickly recover from such events and may be subject to additional risks such as financial problems that limit their ability to conduct their operations. We cannot be assured that we will have insurance to adequately compensate us for any of these events.

Our restructuring plans and other cost savings initiatives may not be as effective as we anticipate, and we may fail to realize the cost savings and increased efficiencies that we expect from these actions. Our operating results could be negatively affected by our inability to effectively implement such restructuring plans and other cost saving initiatives.

We continually seek ways to simplify or improve processes, eliminate excess capacity and reduce costs in all areas of our operations, which from time to time includes restructuring activities. We have implemented significant restructuring activities across our global manufacturing, sales and distribution footprint, which includes workforce reductions and facility consolidations.

14

Table of Contents

Our restructuring actions may not be as effective as we anticipate, and we may fail to realize the cost savings we expect from these actions. Actual charges, costs and adjustments due to restructuring activities may vary materially from our estimates. Our restructuring plans will require significant cash and non-cash integration and implementation costs or charges in order to achieve those cost savings, which could offset any such savings and other benefits.

Although we have considered the impact of local regulations, negotiations with employee representatives and the related costs associated with our restructuring activities, factors beyond the control of management may affect the timing of these projects and therefore affect when savings will be achieved under the plans. Further, our operating results could be negatively affected if we are not successful in completing the restructuring projects in the time frames contemplated or if additional issues arise during the projects that add costs to or disrupt our operations.

Financial Risks

Some of our customers may not be able to obtain financing with third parties to purchase our products, and we may incur expenses associated with our assistance to customers in securing third-party financing.

A portion of our sales are financed by third-party finance companies on behalf of our customers. The availability of financing from third parties is affected by general economic conditions (including the negative impact on economic conditions as a result of COVID-19 and the uncertain future impacts of the continuing pandemic), the creditworthiness of our customers and the estimated residual value of our equipment. In certain transactions, we provide residual value guarantees and buyback commitments to our customers or to third-party financial institutions. Deterioration in the credit quality of our customers or the overall health of the finance industry could negatively impact our customers’ ability to obtain the resources needed to make purchases of our equipment or their ability to obtain third-party financing. In addition, if the actual value of the equipment for which we have provided a residual value guaranty declines below the amount of our guaranty, we may incur additional costs, which may negatively impact our financial condition, results of operations and cash flows.

Our goodwill and other intangible assets represent a material amount of our total assets; as a result, impairments have had, and future impairment may have, a material adverse effect on our results of operations.

As of December 31, 2021, goodwill and other intangible assets totaled $389.3 million, or approximately 21.9% of our total assets. We assess annually whether there has been impairment in the value of our goodwill or indefinite-lived intangible assets. If future operating performance were to fall below current projections or if there are material changes to management’s assumptions, we could be required to recognize additional non-cash charges to operating earnings for goodwill and/or other intangible asset impairment. Goodwill or intangible asset impairments have had, and any future impairments may have, a material adverse effect on our results of operations.

Our results of operations are subject to exchange rate and other currency risks. A significant movement in exchange rates could adversely impact our results of operations and cash flows.

Some of our operations are and will continue to be conducted by subsidiaries in foreign countries. The results of the operations and the financial position of these subsidiaries will be reported in the relevant foreign currencies and then translated into U.S. dollars at the applicable exchange rates for inclusion in our consolidated financial statements, which are stated in U.S. dollars. The exchange rates between foreign currencies and the U.S. dollar have fluctuated significantly in recent years and may continue to fluctuate in the future. Such fluctuations may have a material effect on our results of operations and financial position and may significantly affect the comparability of our results between financial periods.

We also incur currency transaction risk whenever one of our operating subsidiaries enters into a transaction using a different currency than its functional currency. We attempt to reduce currency transaction risk whenever one of our operating subsidiaries enters into a material transaction in a currency other its functional currency by:

However, we may not be able to hedge this risk completely or at an acceptable cost, which may adversely affect our results of operations, financial condition and cash flows in future periods.

15

Table of Contents

Our leverage may impair our operations and financial condition.

As of December 31, 2021, our total consolidated debt was $407.2 million as compared to consolidated debt of $310.9 million as of December 31, 2020.

On March 25, 2019, we and certain of our subsidiaries (the “Loan Parties”) entered into a credit agreement (the “ABL Credit Agreement”) with JP Morgan Chase Bank, N.A. as administrative and collateral agent, and certain financial institutions party thereto as lenders, providing for a senior secured asset-based revolving credit facility (the “ABL Revolving Credit Facility”) of up to $275.0 million. The borrowing capacity under the ABL Revolving Credit Facility is based on the value of inventory, accounts receivable and fixed assets of the Loan Parties. The Loan Parties’ obligations under the ABL Revolving Credit Facility are secured on a first-priority bases, subject to certain exceptions and permitted liens, by substantially all of the personal property and fee-owned real property of the Loan Parties. The liens securing the ABL Revolving Credit Facility are senior in priority to the second-priority liens securing the obligations under the 2026 Notes and the related guarantees. The ABL Revolving Credit Facility has a term of five years and includes a $75.0 million letter of credit sub-facility, $10.0 million of which is available to our German subsidiary that is a borrower under the ABL Revolving Credit Facility.

Additionally, on March 25, 2019, we and certain of our subsidiaries entered into an indenture with U.S. Bank National Association as trustee and notes collateral agent, pursuant to which we issued $300.0 million aggregate principal amount of senior secured second lien notes due on April 1, 2026 with an annual coupon rate of 9.000% (the “2026 Notes”). Interest on the 2026 Notes is payable in cash semi-annual in arrears on April 1 and October 1 of each year. The 2026 Notes are fully and unconditionally guaranteed on a senior secured second lien basis, jointly and severally, by each of our existing and future domestic subsidiaries that is either a guarantor or a borrower under the ABL Revolving Credit Facility or that guarantees certain other debt of us or a guarantor. The 2026 Notes and the related guarantees are secured on a second-priority basis, subject to certain exceptions and permitted liens, by pledges of capital stock and other equity interests and other security interests in substantially all of the personal property and fee-owned real property of us and of the guarantors that secure obligations under the ABL Revolving Credit Facility.

The amount of debt we maintain could have consequences, including increasing our vulnerability to general adverse economic and industry conditions; requiring a substantial portion of our cash flows from operations be used for the payment of interest rather than to fund working capital, capital expenditures, acquisitions and general corporate requirements; limiting our ability to obtain additional financing; and limiting our flexibility in planning for, or reacting to, changes in our business and the end markets in which we operate.

The agreements governing our debt include covenants that restrict, among other matters, our ability to incur additional debt, pay dividends or repurchase our equity, make certain investments, and consolidate, merge or transfer all or substantially all of our assets. Certain of our debt facilities require or will require us to maintain specified financial ratios and satisfy certain financial condition tests. Our ability to comply with these covenants may be affected by events beyond our control, including prevailing economic, financial and industry conditions, as a result of various factors including the continuing COVID-19 pandemic. Adhering to these covenants may also require that we take disadvantageous actions, including reducing spending on marketing, advertising and new product innovation, reducing future financing for working capital, capital expenditures and general corporate purposes, selling assets or dedicating an unsustainable level of cash flows from operations to the payment of principal and interest on our indebtedness. Our leverage could also put us at a disadvantage compared to any competitors that are less leveraged. We cannot be certain that we will meet any future financial tests or that the lenders would waive any such failure to meet those tests. See additional discussion in Note 12, “Debt,” to our Consolidated Financial Statements.

If we default under our debt agreements, our lenders could elect, among other potential remedies, to declare all amounts outstanding under our debt agreements to be immediately due and payable and could proceed against any collateral securing the debt.

Exposure to additional tax liabilities may have a negative impact on our operating results.

We regularly undergo tax audits in various jurisdictions in which we operate. Although we believe that our tax estimates are reasonable and that we prepare our tax filings in accordance with all applicable tax laws, the final determination with respect to any tax audits, and any related contests thereto, could be materially different from our estimates or from our historical income tax provisions and accruals. The results of an audit or contests thereto could have a material adverse effect on operating results and/or cash flows in the periods for which that determination is made. In addition, future period earnings may be adversely impacted by litigation costs, settlements, penalties and/or interest assessments.

16

Table of Contents

We face risks associated with our pension and other postretirement benefit obligations.

We have both funded and unfunded pension and other postretirement benefit plans worldwide. As of December 31, 2021, our projected benefit obligations under our pension and other postretirement benefit plans exceeded the fair value of plan assets by an aggregate of approximately $84.6 million (“unfunded status”), as compared to $106.6 million as of December 31, 2020. Estimates for the amount and timing of the future funding obligations of these benefit plans are based on various assumptions. These assumptions include discount rates, rates of compensation increases, expected long-term rates of return on plan assets and expected healthcare cost trend rates. If our assumptions prove incorrect, our funding obligations may increase, which may have a material adverse effect on our financial results.

We have invested the plan assets of our funded benefit plans in various equity and debt securities. A deterioration in the value of plan assets could cause the unfunded status of these benefit plans to increase, thereby increasing our obligation to make additional contributions to these plans. An obligation to make contributions to our benefit plans could reduce the cash available for working capital and other corporate uses, and may have an adverse impact on our operations, financial condition and cash flows.

Legal and Regulatory Risks

Environmental liabilities that may arise could be material.

Our operations, facilities and properties are subject to extensive and evolving laws and regulations pertaining to air emissions, wastewater discharges, the handling and disposal of solid and hazardous materials and wastes, the remediation of contamination, and otherwise relating to health, safety and the protection of the environment. As a result, we are involved from time to time in administrative or legal proceedings relating to environmental and health and safety matters and have in the past and will continue to incur capital costs and other expenditures relating to such matters. For example, we are engaged in confidential discussions with the United States government concerning our participation in the Environmental Protection Agency's Transition Program for Equipment Manufacturers and related matters. See additional discussion regarding this matter in Note 19, "Commitments and Contingencies" to the Consolidated Financial Statements.

We cannot be certain that identification of presently unidentified environmental conditions, more vigorous enforcement by regulatory authorities or other unanticipated events will not arise in the future and give rise to additional environmental liabilities, compliance costs and/or penalties that could be material. Further, environmental laws and regulations are constantly evolving, and it is impossible to predict accurately the effect they may have upon our financial condition, results of operations or cash flows.

In addition, increasing laws and regulations dealing with environmental aspects of the products we manufacture can result in significant expenditures in designing and manufacturing new products that satisfy such new laws and regulations. In particular, climate change is receiving increasing attention worldwide. Many scientists, legislators and others attribute climate change to increased levels of greenhouse gas emissions. While additional regulation of emissions in the future appears likely, how such new regulations would ultimately affect our business, operations or financial results is unknown at this time.

If we do not meet customers’ product quality, reliability standards and expectations, we may experience increased or unexpected product warranty claims and other adverse consequences to our business.

Product quality and reliability are significant factors influencing customers' decisions to purchase our products. Inability to maintain the high quality of our products relative to the perceived or actual quality of similar products offered by competitors could result in the loss of market share, loss of revenue, reduced profitability, an increase in warranty costs, government investigations and/or damage to our reputation.

Product quality and reliability are determined in part by factors that are not entirely within our control. We depend on our suppliers for parts and components that meet our standards. If our suppliers fail to meet those standards, we may not be able to deliver the quality of products that our customers expect, which may impair our reputation, resulting in lower revenue and higher warranty costs.

We provide our customers a warranty covering workmanship, and in some cases materials, on products we manufacture. Our warranty generally provides that products will be free from defects for periods ranging from 12 months to 60 months. If a product fails to comply with the warranty, we may be obligated, at our expense, to correct any defect by repairing or replacing the defective product. Although we maintain warranty reserves in an amount based primarily on the number of units shipped

17

Table of Contents

and on historical and anticipated warranty claims, there can be no assurance that future warranty claims will follow historical patterns or that we can accurately anticipate the level of future warranty claims. An increase in the rate of warranty claims or the occurrence of unexpected warranty claims, for which we are not insured or where we cannot recover from our vendors to the extent their materials or workmanship were defective, could materially and adversely affect our financial condition, results of operations and cash flows.

If our manufacturing processes and products do not comply with applicable statutory and regulatory requirements, or if we manufacture products containing design or manufacturing defects, demand for our products may decline and we may be subject to product liability claims.

Our designs, manufacturing processes and facilities need to comply with applicable statutory and regulatory requirements. We may also have the responsibility to ensure that products we design satisfy safety and regulatory standards including those applicable to our customers and to obtain any necessary certifications. As a result, products that we manufacture may at times contain manufacturing or design defects, and our manufacturing processes may be subject to errors or not be in compliance with applicable statutory and regulatory requirements or demands of our customers. Potential defects in the products we manufacture or design, whether caused by a design, manufacturing or component failure or error, or deficiencies in our manufacturing processes, may result in delayed shipments to customers, replacement costs or reduced or canceled customer orders. If these defects or deficiencies are significant, our business reputation may also be damaged. The failure of the products that we manufacture or our manufacturing processes and facilities to comply with applicable statutory and regulatory requirements may subject us to legal fines or penalties and, in some cases, require us to shut down or incur considerable expense to correct a manufacturing process or facility.

Any manufacturing or design defects may also result in product liability claims. Furthermore, customers use some of our products in potentially hazardous applications that can cause injury or loss of life and damage to property, equipment or the environment. We may be named as a defendant in product liability or other lawsuits asserting potentially large claims if an accident occurs at a location where our equipment and services have been or are being used. Certain of our businesses also have experienced claims relating to past alleged asbestos exposure. We have not to date incurred material costs related to these asbestos claims. We vigorously defend ourselves against current claims and intend to do so against future claims. We also maintain certain insurance policies which may limit our financial exposures. Any significant liabilities which are not covered by insurance could have an adverse effect on our financial condition, results of operation and cash flows. Likewise, a substantial increase in the number of claims that are made against us or the amounts of any judgments or settlements could materially and adversely affect our reputation and our financial condition, results of operations and cash flows.

Compliance or the failure to comply with regulations and governmental policies could cause us to incur significant expense.

Changes in laws or regulations, or a failure to comply with laws and regulations, may adversely affect our business, investments and results of operations. We are subject to laws and regulations enacted by national, regional and local governments, including non-U.S. governments. In particular, we are required to comply with certain SEC and other legal requirements. Compliance with, and monitoring of, applicable laws and regulations may be difficult, time consuming and costly. Those laws and regulations and their interpretation and application may also change from time to time and those changes could have a material adverse effect on our business, investments and results of operations. In addition, a failure to comply with applicable laws or regulations, as interpreted and applied, could have a material adverse effect on our business and results of operations. Additionally, we may need to obtain and maintain licenses and permits to conduct business in various jurisdictions. If we or the businesses or companies we acquire have failed or fail in the future to comply with such laws and regulations, then we could incur liabilities and fines and our operations could be suspended. Such laws and regulations could also restrict our ability to modify or expand our facilities, could require us to acquire costly equipment, or could impose other significant expenditures.

Our international sales and operations are subject to applicable laws relating to trade, export controls and foreign corrupt practices, the violation of which could adversely affect our operations.

We must comply with all applicable international trade, customs, export controls and economic sanctions laws and regulations of the United States and other countries. We are also subject to the Foreign Corrupt Practices Act and other anti-bribery laws that generally bar bribes or gifts to foreign governments or officials. The existing presidential administration in the United States has taken, and make take additional, actions that may inhibit international trade by U.S.-based companies. Changes in trade sanctions laws may restrict our business practices, including cessation of business activities in sanctioned countries or with sanctioned parties, and may result in modifications to compliance programs. Violation of these laws or regulations could

18

Table of Contents

result in sanctions or fines and could have a material adverse effect on our financial condition, results of operations and cash flows.

If we fail to protect our intellectual property rights or maintain our rights to use licensed intellectual property, our business could be adversely affected.

Our intellectual property, including our patents, trade secrets, trademarks and licenses are important in the operation of our business. Although we intend to protect our intellectual property rights vigorously, we cannot be certain that we will be successful in doing so. Third parties may assert or prosecute infringement claims against us in connection with the services and products that we offer, and we may or may not be able to successfully defend these claims. Litigation, either to enforce our intellectual property rights or to defend against claimed infringement of the rights of others, could result in substantial costs and in a diversion of our resources. In addition, if a third party would prevail in an infringement claim against us, then we would likely need to obtain a license from the third party on commercial terms, which would likely increase our costs. Our failure to maintain or obtain necessary licenses or an adverse outcome in any litigation relating to patent infringement or other intellectual property matters could have a material adverse effect on our financial condition, results of operations and cash flows.

Item 1B. UNRESOLVED STAFF COMMENTS

None.

Item 2. PROPERTIES

Manitowoc maintains leased and owned manufacturing, warehouse, field testing, service and distribution and office facilities throughout the world. The Company’s corporate office is located in Milwaukee, Wisconsin. The Company believes that its facilities currently in use are suitable and have adequate capacity to meet its present and foreseeable future demand. Manitowoc management continually monitors the Company’s capacity needs and makes adjustments as dictated by market and other conditions.

The following table provides information about material facilities owned or leased by the Company as of December 31, 2021.

Item 3. LEGAL PROCEEDINGS

From time to time, the Company is subject to litigation incidental to its business, as well as other litigation of a non-material nature in the ordinary course of business. See Note 19, “Commitments and Contingencies,” to the Consolidated Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K for further information.

Item 4. MINE SAFETY DISCLOSURE

Not Applicable.

19

Table of Contents

INFORMATION ABOUT OUR EXECUTIVE OFFICERS

Each of the following executive officers of the Company has been elected by the Board of Directors. The information presented below is as of February 22, 2022.

The following paragraphs provide further information as to our executive officers’ duties and their employment history:

Aaron H. Ravenscroft has served as the President and Chief Executive Officer of The Manitowoc Company since August 2020. Prior to his appointment, he was the Executive Vice President of Cranes since 2017, overseeing the company’s operational activities. Mr. Ravenscroft joined Manitowoc in 2016 as the Executive Vice President of Mobile Cranes. Before joining Manitowoc, Mr. Ravenscroft served as Regional Managing Director of the North American Minerals business for the Weir Group (2013-2016); President and Group Executive of Process & Flow Control Group of Robbins & Myers (2011-2013); and Regional Vice President of Industrial Products Group for Gardner Denver, Inc. (2008-2011). Mr. Ravenscroft also worked at Westinghouse Air Brake Technologies and Janney Montgomery Scott. He holds an MBA from Carnegie Mellon University and a BA in Economics from Bucknell University.

David J. Antoniuk has served as the Executive Vice President and Chief Financial Officer of The Manitowoc Company since November 2020. Prior to his appointment he was the Senior Vice President and Chief Financial Officer since May 2016, responsible for directing teams in accounting, financial reporting, investor relations, global tax, information services, and treasury. Before joining Manitowoc in 2016, Mr. Antoniuk served as Vice President and Chief Financial Officer at Colorcon, Inc. (2015-2016); Vice President and Corporate Controller at Gardner Denver (2005-2014); and Vice President Finance and Chief Financial Officer at Davis-Standard Corporation (1996-2005). Mr. Antoniuk also worked at Pirelli Cables, Johnson & Johnson, and KPMG. He holds a B.S. degree in business administration from Seton Hall University and received his Certified Public Accounting License from the State of New Jersey.

Leslie L. Middleton has served as the Executive Vice President, Americas and EU Mobile Cranes of The Manitowoc Company since November 2020. Prior to his appointment he was the Senior Vice President of Americas Mobile Cranes. Mr. Middleton joined Manitowoc in February 2016 and is responsible for optimizing operations, development and implementation of lean strategies, increased new product development, and growth in the Americas business and Germany mobiles. Before joining Manitowoc, Mr. Middleton served as Managing Director U.S. Minerals and Executive Vice President Operations at Weir Minerals North America (2014-2016); Vice President and General Manager of Gardner Denver (2009-2013); Director of Manufacturing at Magnet Schultz of America (2004-2009); and Director of Manufacturing and Performance Systems at Vapor Corporation (1995-2004).

Thomas L. Doerr, Jr. has served as the Executive Vice President, General Counsel and Secretary of The Manitowoc Company since November 2020. Prior to his appointment he was the Senior Vice President, General Counsel and Secretary since November 2017. Mr. Doerr joined the Manitowoc Company in 2006 as legal counsel; in 2008 he expatriated to London, England, and in 2009 to Lyon, France as the Assistant General Counsel – International and was responsible for legal matters for the crane segment and the foodservice segment in Europe, Middle East, Africa and Asia Pacific. In 2012 he moved back to the United Sates as Associate General Counsel for Manitowoc Crane. Before joining Manitowoc in 2017, Mr. Doerr served as Vice President, General Counsel and Secretary for Jason Industries, Inc. (2015-2017) and worked at the law firm von Briesen &

20

Table of Contents

Roper, s.c. He holds a BA in Business Administration / Marketing Management from the University of St. Thomas and a Juris Doctorate from Marquette University Law.

Terrance L. Collins has served as the Executive Vice President, Human Resources of The Manitowoc Company since November 2020. Prior to his appointment he was the Senior Vice President, Human Resources and Administration since April 2018, responsible for talent acquisition, talent development, diversity and inclusion, employee engagement, compensation and benefits programs, employee and labor relations, HR information systems and HR administration and compliance. Before joining Manitowoc, Mr. Collins served as Chief Administrative Officer at FDH Velocitel (2014-2018); Senior Vice President, Human Resources at Zebra Technologies (2013-2014); and Vice President, Human Resources at IDEX Corporation (2006-2013). Prior to IDEX, Mr. Collins served in senior leadership positions at AmSan LLC and U.S. Foodservice, Inc. He holds a BS in Business Administration from Towson University.

21

Table of Contents

PART II

Item 5. MARKET FOR REGISTRANT’S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS

The Company’s common stock is traded on the New York Stock Exchange (“NYSE”) under the symbol MTW. The number of shareholders of record of common stock as of December 31, 2021 was 537.

The amount and timing of any dividends are determined by the Board of Directors at its regular meetings each year, subject to limitations within the indenture governing the Company’s 2026 Notes and the Company’s ABL Revolving Credit Facility described below. For the years ended December 31, 2021 and 2020, no cash dividends were declared or paid.

The Company’s ABL Revolving Credit Facility and Indenture governing the 2026 Notes defines certain payments the Company can make, such as the purchase or retirement of Company stock, prepayment of debt principal and distribution of dividends to holders of Company stock as “Restricted Payments.” These Restricted Payments may be constrained by a provision requiring a minimum fixed charge coverage ratio after giving effect to the Restricted Payments under the ABL Credit Agreement and a provision requiring a minimum consolidated total debt ratio under the 2026 Notes indenture. See additional disclosure in Note 12, “Debt,” to the Company’s Consolidated Financial Statements.

See Part III, Item 12 of this Annual Report on Form 10-K for certain information regarding the Company’s equity compensation plans.

22

Table of Contents

Total Return to Shareholders

(Includes reinvestment of dividends)

Item 6. RESERVED

23

Table of Contents

Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

The following discussion and analysis should be read in conjunction with the consolidated financial statements and related notes appearing in Part II, Item 8 of this Annual Report on Form 10-K.

Overview: Manitowoc is a leading provider of engineered lifting solutions, including lattice-boom cranes, tower cranes, mobile hydraulic cranes and boom trucks. The Company has three reportable segments, the Americas segment, EURAF segment and MEAP segment. The segments were identified using the “management approach,” which designates the internal organization that is used by the CEO, who is also the Company’s Chief Operating Decision Maker (“CODM”), for making decisions about the allocation of resources and assessing performance. Further information regarding the Company’s reportable segments can be found in Note 18, “Segments,” to the Consolidated Financial Statements included in Part II, Item 8 of this Annual Report on Form 10-K.

In Management’s Discussion and Analysis, unless otherwise indicated, references to “Manitowoc” and the “Company” refer to The Manitowoc Company, Inc. and its consolidated subsidiaries.

All dollar amounts are in millions throughout the tables included in Management’s Discussion and Analysis of Financial Conditions and Results of Operations unless otherwise indicated.

Segment Operating Performance

Americas

Americas net sales increased 21.0% in 2021 to $757.6 million from $626.1 million in 2020. The increase was primarily due to favorable product mix and pricing actions taken during the year. While demand for cranes was higher year over year, supply chain constraints impacted the Company's ability to produce and ship certain products. The acquisitions of Aspen Equipment Company ("Aspen") and the crane business of H&E Equipment Services, Inc. ("H&E") contributed to the increase of net sales by $26.7 million. However, the acquisitions generated $74.2 million of net sales during the period on a standalone basis.

Americas operating income increased 78.5% in 2021 to $57.3 million from $32.1 million in 2020. The increase was primarily due to higher net sales, favorable product mix and the impact of pricing actions taken during the year. This was partially offset by unfavorable impacts from higher material and transportation costs, increased short-term incentive compensation costs and a $1.9 million asset impairment charge to write-down the value of one of the Company's Brazil entities to its expected sale price.

Americas net sales decreased 35.4% in 2020 to $626.1 million from $969.7 million in 2019. The decrease was primarily related to lower crane shipments as a result of entering the year with lower backlog coupled with the impacts from the COVID-19 pandemic, which significantly reduced demand in most of the Company’s end markets.

Americas operating income decreased 71.7% in 2020 to $32.1 million from $113.4 million in 2019. This change was mainly due to the decrease in net sales and under absorption of facility costs. This was partially offset by decreases of $4.3 million in engineering, selling and administrative expenses and $1.8 million in restructuring expense. Lower engineering, selling and administrative expenses were driven by lower discretionary spend in response to the COVID-19 pandemic.

EURAF

EURAF net sales increased 13.1% in 2021 to $677.0 million from $598.7 million in 2020. The increase was primarily due to higher shipments of cranes compared to the year ended December 31, 2020, which was negatively impacted by the COVID-19

24

Table of Contents

pandemic. While demand for cranes was higher year over year, supply chain constraints impacted the ability to produce and ship certain products. EURAF net sales were favorably impacted by approximately $20.9 million from changes in foreign currency exchange rates.

EURAF operating income decreased in 2021 to $8.9 million from $12.0 million in 2020. The decrease was primarily due to higher material and transportation costs and engineering, selling and administrative expenses including short-term incentive compensation costs. This was partially offset by higher net sales. Operating income was favorably impacted by approximately $2.4 million from changes in foreign currency exchange rates.

EURAF net sales decreased 7.2% in 2020 to $598.7 million from $644.9 million in 2019. The decrease was primarily related to lower crane shipments as a result of the COVID-19 pandemic, which significantly reduced demand in most of the Company’s end markets. This was partially offset by $10.4 million from favorable changes in foreign currency exchange rates.

EURAF operating income increased in 2020 to $12.0 million from $3.8 million in 2019. The increase was primarily related to favorable sales mix, $6.6 million of lower engineering, selling and administrative expenses and $2.6 million of lower restructuring expense. Lower engineering, selling and administrative expenses were driven by lower discretionary spend in response to the COVID-19 pandemic. This was partially offset by the decrease in net sales. In addition, operating income was impacted by $1.4 million from favorable changes in foreign currency exchange rates.

MEAP

MEAP net sales increased 30.6% in 2021 to $285.6 million from $218.6 million in 2020. The increase was primarily due to higher crane shipments compared to the year ended December 31, 2020, which was negatively impacted by the COVID-19 pandemic. MEAP net sales were favorably impacted by approximately $10.0 million from changes in foreign currency exchange rates.

MEAP operating income increased 1.6% in 2021 to $30.9 million from $30.4 million in 2020. The increase was primarily due to higher net sales. This was partially offset by higher material and transportation costs, engineering, selling and administrative expenses including short-term incentive compensation costs and a $3.6 million loss from a write-off of a long-term note receivable resulting from the 2014 divestiture of the Company’s Chinese joint venture. MEAP operating income was favorably impacted by approximately $0.3 million from changes in foreign currency exchange rates.

MEAP net sales decreased 0.4% in 2020 to $218.6 million from $219.5 million in 2019. Net sales were impacted favorably by project driven demand in the Middle East, offset by lower crane shipments as a result of the COVID-19 pandemic. MEAP net sales were favorably impacted by $2.4 million from changes in foreign currency exchange rates.

MEAP operating income increased 34.5% in 2020 to $30.4 million from $22.6 million in 2019. The increase was primarily due to $7.1 million of lower engineering, selling and administrative expenses and $1.9 million of lower restructuring expense compared to 2019. Lower engineering, selling and administrative expenses were driven by lower discretionary spend in response to the COVID-19 pandemic.

25

Table of Contents

Results of Operations for the Years Ended December 31, 2021, 2020 and 2019

Orders and Backlog

Backlog represents the dollar value of orders which are expected to be recognized in net sales in the future. Orders are included in backlog when an executed binding contract has been received but has not been recognized in net sales. Orders and backlog are not measures defined by accounting principles generally accepted in the United States of America (“GAAP”) and our methodology for determining orders and backlog may vary from the methodology used by other companies.
Management uses orders and backlog for capacity and resource planning. We believe this information is useful to investors to provide an indication of our future revenues.

Orders for the year ended December 31, 2021 increased 43.4% to $2,166.6 million from $1,511.4 million for the same period in 2020 of which $55.4 million was from the acquisitions. The increase was primarily related to higher global demand as the year ended December 31, 2020 was significantly impacted by the COVID-19 pandemic. Orders were favorably impacted by approximately $31.7 million from changes in foreign currency exchange rates.

The Company’s backlog as of December 31, 2021, 2020, and 2019, was $1,010.9 million, $543.2 million and $475.1 million, respectively, of which $39.3 million as of December 31, 2021 was from the acquisitions. Backlog increased across all segments and was unfavorably impacted by $39.5 million from changes in foreign currency exchange rates.

Net Sales

Consolidated net sales for the year ended December 31, 2021 increased 19.2% to $1,720.2 million from $1,443.4 million for the same period in 2020. The increase was primarily from higher crane shipments due to increased demand as compared to the year ended December 31, 2020, which was negatively impacted by the COVID-19 pandemic. While demand for cranes was higher year over year, supply chain constraints negatively impacted the Company's ability to produce and ship certain products. The acquisitions of Aspen and the crane business of H&E contributed to the increase of net sales by $26.7 million. However, the acquisitions generated $74.2 million of net sales during the period on a standalone basis. Net sales were favorably impacted by approximately $31.0 million from changes in foreign currency exchange rates.

Consolidated net sales decreased 21.3% in 2020 compared to 2019. The decrease was primarily related to lower crane shipments as a result of entering the year with lower backlog in the Americas segment as well as the impacts from the COVID-19 pandemic, which significantly reduced demand in most of the Company’s end markets. This was partially offset by $12.4 million from favorable changes in foreign currency exchange rates.

26

Table of Contents

Gross Profit

Gross profit for the year ended December 31, 2021 increased 20.6% to $307.2 million compared to $254.7 million for the year ended December 31, 2020. The increase was primarily due to the increase in net sales, partially offset by increases in material and transportation costs. Gross profit was favorably impacted by approximately $7.1 million from changes in foreign currency exchange rates.

Gross profit percentage in 2021 was 17.9% compared to 17.6% in 2020, or relatively flat year over year.

Gross profit for the year ended December 31, 2020 decreased by 26.0% to $254.7 million compared to $344.1 million for the year ended December 31, 2019. This decrease was primarily due to the decrease in net sales and an increase in costs due to under absorption of facility costs from lower utilization of the Company’s manufacturing facilities due to the COVID-19 pandemic. Gross profit was favorably impacted by $3.0 million from changes in foreign currency exchange rates.

Gross profit percentage decreased in 2020 to 17.6% from 18.8% in 2019 primarily due to under absorption of facility costs from lower utilization of the Company’s manufacturing facilities due to the COVID-19 pandemic.

Engineering, Selling and Administrative Expenses

Engineering, selling and administrative expenses for the year ended December 31, 2021 increased $49.7 million to $258.5 million. The increase was primarily due to a $13.9 million charge related to a legal matter with the U.S. Environmental Protection Agency, higher employee-related costs, inclusive of short-term incentive compensation costs, a $3.6 million loss from a write-off of a long-term note receivable resulting from the 2014 divestiture of the Company’s Chinese joint venture and acquisition related costs. This was partially offset by lower tradeshow costs from the triennial ConExpo trade show in March 2020. Engineering, selling and administrative expenses were unfavorably impacted by approximately $4.4 million from changes in foreign currency exchange rates.

Engineering, selling and administrative expenses for the year ended December 31, 2020 decreased $16.8 million to $208.8 million. The decrease was primarily due to lower short-term incentive compensation costs, reduced discretionary spending in response to the COVID-19 pandemic and a decrease in compensation and benefits due to cost reduction actions primarily in North America. This was partially offset by a $8.9 million benefit recorded in 2019 related to the settlement of a legal matter. Engineering, selling and administrative expenses were also unfavorably impacted by $1.1 million from changes in foreign currency exchange rates.

Asset Impairment Expense

During the year ended December 31, 2021, the Company recorded an asset impairment of $1.9 million to write-down the value of one of the Company's Brazil entities to its expected sale price.

There were no asset impairments for the years ended December 31, 2020 and 2019.

Restructuring (Income) Expense

Restructuring (income) expense for the year ended December 31, 2021 totaled $1.1 million of income compared to $7.0 million of expense in 2020. Restructuring income for 2021 primarily related to adjustments of previously recorded costs associated with a lease write-off in the Americas and headcount reductions in Europe. In addition, the Company recorded income on the sale of previously expensed Brazilian tax credits.

Restructuring expense for the year ended December 31, 2020 totaled $7.0 million compared to $9.8 million in 2019. Expenses in 2020 related primarily to costs associated with headcount reductions in Europe and North America, partially offset by $2.5 million of income from the forfeiture of equity compensation awards associated with employee separation agreements.

Interest Expense

Interest expense remained flat for the year ended December 31, 2021 at $28.9 million compared to $29.1 million for the year ended December 31, 2020. Refer to Note 12, “Debt” to the Consolidated Financial Statements.

Interest expense for the year ended December 31, 2020 totaled $29.1 million versus $32.7 million for the year ended December 31, 2019. This decrease was primarily due to a reduction of the average effective interest rate from 10.1% in 2019 to 9.0% in 2020. The decrease in the average effective interest rate was primarily due to the refinancing of the Company’s senior secured

27

Table of Contents

high yield notes that occurred in the first quarter of 2019 as well as the reduction in interest rates on the Company’s variable rate debt.

Loss on Debt Extinguishment

During the year ended December 31, 2019, the Company recorded a $25.0 million charge associated with the refinancing of the Company’s prior credit facility and notes. The charge is composed of $16.6 million of call premium on the prior notes, $5.3 million of unamortized discount on the prior notes and $3.1 million of unamortized debt issuance costs.

Other income (expense) – Net

Other income (expense) - net for the year ended December 31, 2021 was $1.0 million of income and was primarily composed of $1.1 million of net foreign currency gains.

Other income (expense) - net for the year ended December 31, 2020 was $10.0 million of expense and was primarily composed of $3.9 million of net foreign currency losses, $3.7 million charge related to the settlement of a legal matter and $1.6 million of pension benefit costs.

Other income (expense) - net for the year ended December 31, 2019 was $9.8 million of income and was primarily composed of a $15.5 million benefit related to a settlement of a legal matter and a $3.5 million gain on the sale of the Company’s Manitowoc, Wisconsin manufacturing facility. This was partially offset by $4.4 million of pension benefit costs and $5.5 million of net foreign currency losses.

Income Taxes

During the year ended December 31, 2021, 2020 and 2019 the Company recorded income tax expense of $6.1 million, $17.1 million and $12.4 million respectively.

Due to the Company’s historic losses, impacts from U.S. tax reform and full valuation allowances in certain jurisdictions, the effective annual tax rate is not a meaningful measure of the Company’s cash tax position or performance of the business.

The 2021 effective tax rate was favorably impacted primarily by the release of an unrecognized tax benefits reserve of $2.8 million and a $2.7 million partial release of a Chinese valuation allowance. The rate was unfavorably impacted by the jurisdictional mix of the financial results which includes recognition of additional valuation allowances in certain jurisdictions.

The 2020 effective tax rate was favorably impacted primarily by the passing of The Coronavirus Aid, Relief and Economic Security Act by $3.7 million that allowed the Company to implement certain U.S. tax planning strategies. The rate was unfavorably impacted primarily by additional valuation allowances recorded during the year and the jurisdictional mix of the financial results.

The 2019 effective tax rate equaled the U.S. statutory rate of 21%. The rate was favorably impacted primarily by manufacturing and research incentives and non-U.S. income taxed at a rate other than the U.S. statutory rate. The rate was unfavorably impacted primarily by additional valuation allowances recorded during the year and U.S. tax reform.

See further detail at Note 14, “Income Taxes” to the Consolidated Financial Statements.

Financial Condition

Cash Flows

The table below shows a summary of cash flows for the years ended December 31, 2021, 2020 and 2019:

28

Table of Contents

Cash Flows From Operating Activities

Cash flows provided by operating activities in 2021 were $76.2 million and were primarily driven by net income and a net decrease in operating assets and liabilities of $3.1 million. The decrease in operating assets and liabilities was primarily due to an increase in accounts payable and accrued expenses of $83.2 million, partially offset by an increase in inventories of $68.3 million and accounts receivable of $5.2 million from December 31, 2020.

Cash flows used for operating activities in 2020 were $35.1 million and were primarily driven by increases in working capital. Working capital increases were primarily from higher accounts receivable and lower accounts payable and accrued expenses and other liabilities.

Cash flows used for operating activities in 2019 were $53.3 million and were primarily driven by trade receivables sold to the prior accounts receivable securitization program resulting in $126.3 million of cash flows being reported in cash provided by investing activities and $75.0 million of purchases of accounts receivable previously sold to the prior accounts receivable securitization program. This was partially offset by a $124.0 million increase in net income excluding adjustments to reconcile net income (loss) to operating cash flows from operating activities, a $24.0 million net reduction in working capital since December 31, 2018 and $24.4 million of net cash received from the settlement of a legal matter.

Cash Flows From Investing Activities

Cash flows used for investing activities were $226.3 million in 2021. Cash flows used for investing activities in 2021 consisted primarily of $186.2 million related to the acquisitions of Aspen and the crane business of H&E and $40.4 million of capital expenditures.

Cash flows used for investing activities were $25.8 million in 2020. Cash flows provided by investing activities in 2020 primarily consisted of $26.3 million of capital expenditures offset by $0.5 million of cash proceeds on the sale of property, plant and equipment.

Cash flows provided by investing activities were $108.4 million in 2019. Cash flows provided by investing activities in 2019 primarily consisted of $126.3 million of cash collections on accounts receivable sold to the Company’s securitization program and $17.2 million of cash proceeds on the sale of property, plant and equipment. This was partially offset by capital expenditures of $35.1 million.

Cash Flows From Financing Activities

Cash flows provided by financing activities during 2021 totaled $100.9 million and consisted primarily of $100.0 million of borrowings on the ABL Revolving Credit Facility to fund the acquisitions.

Cash flows used for financing activities during 2020 totaled $14.8 million and consisted primarily of $12.0 million for the repurchase of the Company’s common stock and $2.9 million of payments on other debt.

Cash flows provided by financing activities during 2019 totaled $3.7 million and consisted primarily of $300.0 million of proceeds from the issuance of new high-yield notes (i.e., the 2026 Notes), partially offset by payments of $276.6 million to terminate the prior high-yield notes, $8.3 million of debt issuance costs on the ABL Revolving Credit Facility and 2026 Notes, $7.4 million from the repurchase of the Company’s common stock and $4.4 million of payments on other debt.

Liquidity and Capital Resources

Liquidity

The Company’s liquidity position as of December 31, 2021 and 2020 is summarized as follows:

29

Table of Contents

The Company’s revolving credit facility, or other future facilities, may be used for working capital requirements, capital expenditures, funding future acquisitions (within the Company’s debt limitations), and other operating, investing and financing needs. The Company believes its liquidity and expected cash flows from operations should be sufficient to meet expected working capital, capital expenditures, contractual obligations and other ongoing operational needs for the subsequent twelve months.

Cash Sources

The Company has historically relied primarily on cash flows from operations, borrowings under revolving credit facilities, issuances of notes and other forms of debt financing as its sources of cash. From time to time, we opportunistically look at the credit and debt markets for new sources of capital or to reduce our cost of capital.

The maximum availability under the Company’s current ABL Revolving Credit Facility is $275.0 million. The borrowing capacity under the ABL Revolving Credit Facility is based on the value of inventory, accounts receivable and fixed assets of the Loan Parties as defined in the ABL Credit Agreement.

In addition to the ABL Revolving Credit Facility, the Company has access to non-committed overdraft facilities to fund working capital in Europe and China. There are six facilities, of which four are denominated in Euros totaling €28.0 million, one denominated in U.S. dollars totaling $9.5 million and one denominated in Chinese Yuan totaling ¥30.0 million. During the year ended 2021, the Company borrowed ¥30.0 million, or approximately $4.7 million on its Chinese Yuan facility. Total availability as of December 31, 2021 for the six overdraft facilities is $47.2 million with $4.7 million outstanding.

Debt

On March 25, 2019, the Company and certain subsidiaries of the Company (the “Loan Parties”) entered into the ABL Credit Agreement with JP Morgan Chase Bank, N.A as administrative and collateral agent, and certain financial institutions party thereto as lenders, providing for the ABL Revolving Credit Facility of up to $275.0 million. The borrowing capacity under the ABL Revolving Credit Facility is based on the value of inventory, accounts receivable and fixed assets of the Loan Parties. The Loan Parties’ obligations under the ABL Revolving Credit Facility are secured on a first-priority basis, subject to certain exceptions and permitted liens, by substantially all of the personal property and fee-owned real property of the Loan Parties. The liens securing the ABL Revolving Credit Facility are senior in priority to the second-priority liens securing the obligations under the 2026 Notes and the related guarantees. The ABL Revolving Credit Facility has a term of five years and includes a $75.0 million letter of credit sub-facility, $10.0 million of which is available to the Company’s German subsidiary that is a borrower under the ABL Revolving Credit Facility.

On June 17, 2021 the Company amended its ABL Credit Agreement to adjust certain negative covenants reducing restrictions on the Company's ability to expand its rental business.

Borrowings under the ABL Revolving Credit Facility bear interest at a variable rate using either the Alternative Base Rate or the Eurodollar and Overnight London Interbank Offer Rate (“LIBOR”). The variable interest rate is based upon the average availability as of the most recent determination date as follows:

As of December 31, 2021, the Company had other indebtedness outstanding of $10.3 million with a weighted-average interest rate of approximately 3.4%. This debt includes balances on local credit lines and capital lease obligations.

As of December 31, 2021, the Company had $100.0 million of borrowings outstanding under the ABL Revolving Credit Facility and no borrowings outstanding as of December 31, 2020. During the year ended December 31, 2021, the highest daily borrowing under the ABL Revolving Credit Facility was $100.0 million and the average borrowing was $26.0 million, while the weighted-average annual interest rate was 1.4%. During the year ended December 31, 2020, the highest daily borrowing under the ABL Revolving Credit Facility was $50.0 million and the average borrowing was $13.3 million, while the

30

Table of Contents

weighted-average annual interest rate was 1.8%. The interest rate of the ABL Revolving Credit Facility fluctuates based on excess availability. During the year ended December 31, 2021, the spreads for LIBOR and Eurodollar, and Alternative Base Rate borrowings were 1.25% and 0.25%, respectively. Excess availability as of December 31, 2021 was $136.3 million, which represents revolver borrowing capacity of $239.3 million less $100.0 million in borrowings outstanding and U.S. letters of credit outstanding of $3.0 million.

On March 25, 2019, the Company and certain of its subsidiaries entered into an indenture with U.S. Bank National Association as trustee and notes collateral agent, pursuant to which the Company issued $300.0 million aggregate principal amount of the 2026 Notes with an annual coupon rate of 9.000%. Interest on the 2026 Notes is payable in cash semi-annually in arrears on April 1 and October 1 of each year. The 2026 Notes are fully and unconditionally guaranteed on a senior secured second lien basis, jointly and severally, by each of the Company’s existing and future domestic subsidiaries that is either a guarantor or a borrower under the ABL Revolving Credit Facility or that guarantees certain other debt of the Company or a guarantor. The 2026 Notes and the related guarantees are secured on a second-priority basis, subject to certain exceptions and permitted liens, by pledges of capital stock and other equity interests and other security interests in substantially all of the personal property and fee-owned real property of the Company and of the guarantors that secure obligations under the ABL Revolving Credit Facility.

Both the ABL Revolving Credit Facility and the 2026 Notes include customary covenants which include, without limitation, restrictions on the Company’s ability and the ability of the Company’s restricted subsidiaries to incur, assume or guarantee additional debt or issue certain preferred shares, pay dividends on or make other distributions in respect of the Company’s capital stock or make other restricted payments, make certain investments, sell or transfer certain assets, create liens on certain assets to secure debt, consolidate, merge, sell, or otherwise dispose of all or substantially all of the Company’s assets, enter into certain transactions with affiliates and designate the Company’s subsidiaries as unrestricted. Both the ABL Revolving Credit Facility and the 2026 Notes also include customary events of default. The ABL Revolving Credit Facility has customary representations and warranties including, as a condition to borrowing, that all such representations and warranties are true and correct, in all material respects, on the date of the borrowing, including representations as to no material adverse change in the Company’s business or financial condition since December 31, 2018.

Additionally, the ABL Revolving Credit Facility contains a covenant requiring the Company to maintain a minimum fixed charge coverage ratio under certain circumstances set forth in the ABL Credit Agreement.

The aggregate scheduled future maturities of outstanding debt obligations as of December 31, 2021 is as follows:

The table of scheduled maturities above does not agree to the Company’s total debt as of December 31, 2021 as shown on the Consolidated Balance Sheet and in Note 12, “Debt” to the Consolidated Financial Statements due to $3.1 million of deferred financing costs related to the 2026 Notes.

As of December 31, 2021, the Company was in compliance with all affirmative and negative covenants in its debt instruments, inclusive of the financial covenants pertaining to the ABL Revolving Credit Facility and 2026 Notes. Based upon management’s current plans and outlook, the Company believes it will be able to comply with these covenants during the subsequent twelve months.

Other Financing Arrangements

The Company has two non-U.S. accounts receivable financing programs with maximum availability of €55.0 million and one U.S. accounts receivable financing program with maximum availability of $40.5 million. Under these financing programs, the Company has the ability to sell eligible receivables up to the maximum limit and can sell additional receivables as previously sold receivables are collected. As of the year ended December 31, 2021, the Company sold receivables and received cash of $228.6 million. Transactions under the U.S. and non-U.S. accounts receivable financing programs are accounted for as sales in accordance with Accounting Standards Codification ("ASC") Topic 860.

31

Table of Contents

See further details at Note 13, “Accounts Receivable Factoring” to the Consolidated Financial Statements.

Off-Balance Sheet Arrangements

The Company's disclosures concerning transactions, arrangements and other relationships with unconsolidated entities or other persons that are reasonably likely to materially affect liquidity or the availability of or requirements for capital resources are as follows:

Contractual Obligations and Commercial Commitments

A summary of the Company's significant contractual obligations as of December 31, 2021 is as follows:

As of December 31, 2021, the Company had buyback commitments with a balance outstanding of $36.4 million. This amount is not reduced for amounts the Company would recover from the repossession and subsequent resale of collateral. The Company is committed to pay $27.0 million of annual interest on the 2026 Notes. Additionally, the Company's debt outstanding under the ABL Revolving Credit Facility is subject to variable interest based on prevailing rates.

The Company maintains defined benefit pension plans for some of the Company’s employees and retirees. The Board of Directors has established the Retirement Plan Committee to manage the operations and administration of all benefit plans and related trusts. For further information see Note 22, “Employee Benefit Plans,” to the Consolidated Financial Statements.

In 2021, cash contributions by the Company to defined benefit pension plans were $4.4 million, and the Company estimates that its contributions in 2022 will be approximately $3.9 million. Cash contributions to the Company’s 401(k) plan were $5.8 million in 2021.

Capital Expenditures

The Company funds capital expenditures that are intended to:

The Company paid a total of $40.4 million during 2021 for capital expenditures. For the year ended December 31, 2021, depreciation was $45.5 million. The Company anticipates that capital expenditures for fiscal year 2022 will be approximately $85.0 million, of which approximately $35.0 million will be funded from sales of the Company's existing rental fleet through rent to own programs and sales of older cranes. If the value of rental fleet sales is less than expected, capital expenditures will be proportionally reduced.

32

Table of Contents

Management also considers the following regarding liquidity and capital resources to identify trends, demands, commitments, events and uncertainties that require disclosure:

A. Our ABL Revolving Credit Facility and indenture governing the 2026 Notes require us to comply with certain financial ratios and tests. The Company was in compliance with these covenants as of December 31, 2021, the latest measurement date. The occurrence of any default of these covenants could result in acceleration of any outstanding balances under the ABL Revolving Credit Facility. Further, such acceleration would constitute an event of default under the indenture governing the Company's 2026 Notes and other debt and could trigger cross default provisions in other agreements.

B. Circumstances that could impair our ability to continue to engage in transactions that have been integral to historical operations or are financially or operationally essential, or that could render that activity commercially impracticable, such as the inability to maintain a specified credit rating, level of earnings, earnings per share, financial ratios, or collateral. The Company does not believe that these risk factors are reasonably likely to impair its ability to continue to engage in planned activities at this time.

C. Factors specific to us and our markets that we expect to be given significant weight in the determination of our credit rating or will otherwise affect our ability to raise short-term and long-term financing. The Company does not presently believe that events covered by these risk factors applicable to the business could materially affect its credit ratings or could adversely affect its ability to raise short-term or long-term financing.

D. The Company has disclosed information related to certain guarantees in Note 20, “Guarantees,” to the Consolidated Financial Statements.

E. Written options on non-financial assets (for example, real estate puts). The Company does not have any written options on non-financial assets.

Non-GAAP Measures

The Company uses EBITDA, adjusted EBITDA and adjusted operating income, which are financial measures that are not prepared in accordance with GAAP, as additional metrics to evaluate the Company’s performance.

The Company defines EBITDA as net income (loss) before interest, income taxes, depreciation and amortization. The Company defines adjusted EBITDA as EBITDA plus the addback of certain restructuring and other charges. The Company defines adjusted operating income as adjusted EBITDA excluding the addback of depreciation and amortization. The Company believes these non-GAAP measures provide important supplemental information to readers regarding business trends that can be used in evaluating its results of operations because these financial measures provide a consistent method of comparing financial performance and are commonly used by investors to assess performance. These non-GAAP financial measures should be considered together with, and are not substitutes for, the GAAP financial information provided herein.

33

Table of Contents

The reconciliation of net income (loss) to EBITDA, and further to adjusted EBITDA and to adjusted operating income and operating income is as follows:

The Company uses adjusted operating cash flows and free cash flows, which are financial measures that are not prepared in accordance with GAAP, as additional metrics to evaluate the Company’s performance. Adjusted operating cash flows is defined as cash flows provided by (used for) operating activities plus cash receipts on sold accounts receivable to the terminated securitization program and other one-time items. Free cash flows are defined as adjusted operating cash flows less capital expenditures. The reconciliation of cash flows used for operating activities to adjusted operating cash flows and further to free cash flows for the year ended December 31, 2021, 2020 and 2019 are summarized as follows:

Financial Risk Management

The Company is exposed to market risks from changes in interest rates, commodities and foreign currency exchange rates. To reduce these risks, the Company selectively use derivative financial instruments and other proactive management techniques. The Company has written policies and procedures that place financial instruments under the direction of corporate finance and

34

Table of Contents

restrict all derivative transactions to those intended for hedging purposes. The use of financial instruments for trading purposes or speculation is strictly prohibited.

For a more detailed discussion of our accounting policies and the financial instruments that we use, please refer to Note 2, “Summary of Significant Accounting Policies,” Note 5, “Fair Value of Financial Instruments,” and Note 12, “Debt,” to the Consolidated Financial Statements.

Interest Rate Risk

The Company is exposed to fluctuating interest rates for certain of its debt. At any time, the Company could be party to various interest rate swaps in connection with its fixed or floating rate debt. No interest rate swaps were entered into or outstanding during 2021 and 2020.

Commodity Prices

The Company is exposed to fluctuating market prices for commodities, including steel, copper, aluminum, and petroleum-based products. The Company’s business is subject to the effect of changing raw material costs caused by movements in underlying commodity prices. The Company has established programs to manage the negotiations of commodity prices. From time to time the Company may use commodity financial instruments to hedge commodity prices. No commodity financial instruments were entered into or outstanding during 2021 and 2020.

Currency Risk

The Company has manufacturing, sales and distribution facilities around the world, and therefore, makes investments and enters into transactions denominated in various currencies, which introduces transactional currency exchange risk.

To mitigate transactional currency exchange risk, the Company, from time-to-time, enters into foreign exchange contracts to 1) reduce the earnings and cash flows impact on non-functional currency denominated receivables and payables and 2) reduce the impact of changes in foreign currency rates between a budgeted rate and the rate realized at the time it recognizes a particular purchase or sale transaction. Gains and losses resulting from hedging instruments either impact the Company’s Consolidated Statements of Operations in the period of the underlying purchase or sale transaction, or offset the foreign exchange gains and losses on the underlying receivables and payables being hedged. The maturities of these foreign exchange contracts coincide with the expected underlying settlement date of the related cash inflow or outflow. The hedges of anticipated transactions are designated as cash flow hedges as required under ASC Topic 815 “Derivatives and Hedging.” As of December 31, 2021, the Company was party to foreign currency forward contracts with a notional value of $11.3 million all of which are carried on the Company’s balance sheet at fair value. As of December 31, 2021, a 10% increase or decrease in the exchange rate in the Company’s portfolio of foreign currency contracts would have increased or decreased the Company’s unrealized gains or losses by $1.1 million. Consistent with the use of these contracts to neutralize the effect of exchange rate fluctuations, such unrealized losses or gains would be offset by corresponding gains or losses, respectively, in the remeasurement of the underlying transactions being hedged.

Amounts invested in non-U.S. based subsidiaries are translated into U.S. dollars at the exchange rate in effect at year-end. Results of operations are translated into U.S. dollars at an average exchange rate for the period. The resulting translation adjustments are recorded in stockholders’ equity as other comprehensive income (loss). The cumulative translation adjustment recorded in accumulated other comprehensive loss as of December 31, 2021 was a loss of $20.5 million.

Environmental, Health, Safety, Contingencies and Other Matters

Refer to Part II, Item 8, Note 19, “Commitments and Contingencies,” where the Company has disclosed environmental, health, safety, contingencies and other matters.

Critical Accounting Policies and Estimates

The Consolidated Financial Statements include the accounts of the Company and all its subsidiaries. The preparation of financial statements in conformity with GAAP requires the Company to make estimates and assumptions in certain circumstances that affect amounts reported in the accompanying Consolidated Financial Statements and related footnotes. In preparing these Consolidated Financial Statements, the Company has made its best estimates and judgments of certain amounts included in the Consolidated Financial Statements giving due consideration to materiality. However, application of these accounting policies involves the exercise of judgment and use of assumptions as to future uncertainties and, as a result, actual results could differ from these estimates. Although the Company has listed a number of accounting policies below which the

35

Table of Contents

Company believes to be most critical, the Company also believes that all of the Company’s accounting policies are important to the reader. Therefore, please refer also to the Notes to the Consolidated Financial Statements for more detailed description of these and other accounting policies of the Company.

Revenue Recognition – The Company records revenue in accordance with ASC Topic 606 – “Revenue from Contracts with Customers.” Below are the Company's revenue recognition policies by performance obligation.

Crane sales are primarily generated through the sale of new and used cranes. Contracts with customers are generally in the form of a purchase order. Based on the nature of the Company’s contracts, the Company does not have any significant financing terms. Contracts may have variable consideration in the form of early pay discounts or rebates. Revenue is earned under these contracts when control of the product is transferred to the customer. Control transfers to the customer generally upon delivery to the carrier or acceptance through an independent inspection company that acts as an agent of the customer.

From time to time, the Company enters into agreements where the customer has the right to exercise a put option requiring the Company to buyback a crane at an agreed upon price. The Company evaluates each agreement at the inception of the order to determine if the customer has a significant economic incentive to exercise that right. If it is determined that the customer has a significant economic incentive to exercise that right, the agreement is accounted for as a lease in accordance with ASC Topic 842 - “Leases.” If it is determined that the customer does not have a significant economic incentive to exercise that right, then revenue is recognized when control of the asset is transferred to the customer.

Given the nature of the Company’s products, the customer may request that the product be held until a delivery location is identified. Under these “bill and hold” arrangements, sales are recognized when all of the following criteria are met: 1) the reason for the bill-and-hold arrangement is substantive, 2) the product is separately identified as belonging to the customer, 3) the product is ready for transfer to the customer and 4) the Company does not have the ability to use the product or direct it to another customer.

Aftermarket part sales are generated through the sale of new and used parts to end customers and distributors. Aftermarket part sales are recognized when control of the product is transferred to the customer. Control transfers to the customer generally upon delivery to the carrier. Customers generally have a right of return which the Company estimates using historical information. The amount of estimated returns is deducted from net sales.

The Company’s other sales consist primarily of sales from:

As it relates to the Company’s other sales, the Company’s performance obligations generally relate to performing specific agreed upon services. Sales are earned upon the completion of those services.

Inventories and Related Reserve for Obsolete and Excess Inventory - Inventories are valued at the lower of cost or net realizable value. Finished goods and work-in-process inventories include material, labor and manufacturing overhead costs. Inventories are reduced by a reserve for excess and obsolete inventories. The estimated reserve is based upon specific identification of excess or obsolete inventories based on historical usage, estimated future usage, sales requiring the inventory and historical write-off experience and are subject to change if experience improves or deteriorates.

Goodwill, Other Intangible Assets and Other Long-Lived Assets - The Company accounts for goodwill and other intangible assets under the guidance of ASC Topic 350-10, “Intangibles - Goodwill and Other.” Under ASC Topic 350-10, goodwill is not amortized; instead, the Company performs an annual impairment review. The date for the annual impairment review is October 31, 2021, or more frequently if events or changes in circumstances indicate that the assets might be impaired. To perform its

36

Table of Contents

goodwill impairment review, the Company uses the income approach and market approach with a weighting of 70/30, respectively, to fair value each reporting unit. Goodwill impairment is determined by the amount by which a reporting unit’s carrying value exceeds its fair value, not to exceed the carrying amount of goodwill. To perform its indefinite lived intangible assets impairment test, the Company uses a fair-value method, based on a relief of royalty valuation approach. Management’s judgments and assumptions about the amounts of those cash flows and the discount rates are inputs to these analyses. The estimated fair value is then compared with the carrying amount of the reporting unit or indefinite lived intangible asset and are subject to a write-down to the extent that the carrying amount exceeds the estimated fair value.

The Company has four reporting units: Americas - Manufacturing, Americas - Distribution, EURAF and MEAP.

As of October 31, 2021, the Company performed its annual goodwill and indefinite-lived assets impairment tests, and based on those results, no impairments were indicated. The valuation of the goodwill is particularly sensitive to management’s assumptions of revenue growth rates and projected operating income, and an unfavorable change in those assumptions could put goodwill at risk for impairment in future periods.

Other intangible assets with definite lives continue to be amortized over their estimated useful lives. Definite lived intangible assets are also subject to impairment testing whenever events or circumstances indicate that the carrying value of the assets may not be recoverable. If an indicator of impairment is identified, the Company would use the income approach, which is based on the present value of expected future cash flows.

The Company also reviews long-lived assets for impairment whenever events or changes in circumstances indicate that the asset's carrying amount may not be recoverable. The Company conducts its long-lived asset impairment analyses in accordance with ASC Topic 360-10-5, “Property, Plant, and Equipment.” ASC Topic 360-10-5 requires the Company to group assets and liabilities at the lowest level for which identifiable cash flows are largely independent of the cash flows of other assets and liabilities and to evaluate the asset group against the sum of the undiscounted future cash flows.

The Company monitors for events and market conditions to determine if any additional interim reviews of goodwill, other intangibles or long-lived assets are warranted. Deterioration in the market or actual results as compared with the Company’s projections may ultimately result in a future impairment. In the event the Company determines that assets are impaired in the future, the Company would recognize a non-cash impairment charge, which could have a material adverse effect on the Company’s Consolidated Balance Sheet and Results of Operations.

Employee Benefit Plans – The Company provides a range of benefits to its employees and retired employees, including pensions and postretirement health care coverage. Plan assets and obligations are recorded annually based on the Company’s measurement date utilizing various actuarial assumptions such as discount rates, expected return on plan assets, compensation increases, retirement and mortality rates and health care cost trend rates as of that date. The approach the Company used to determine the annual assumptions are as follows:

Measurements of net periodic benefit cost are based on the assumptions used for the previous year-end measurements of assets and obligations. The Company reviews its actuarial assumptions on an annual basis and makes modifications to the assumptions when appropriate. As required by GAAP, the effects of the modifications are recorded currently or amortized over

37

Table of Contents

future periods. The Company has developed the assumptions with the assistance of its independent actuaries and other relevant sources, and believes the assumptions used are reasonable; however, changes in these assumptions could impact the Company’s financial position, results of operations or cash flows. Refer to Note 22, “Employee Benefit Plans” to the Consolidated Financial Statements, for a summary of the impact of a 0.50% change in the discount rate and rate of return on plan assets would have on the Company’s financial statements. Based on information provided by its independent actuaries and other relevant sources, the Company believes that the assumptions used are reasonable; however, change in these assumptions could impact the Company's financial position, results of operations or cash flows.

Product Liability – The Company is subject, in the normal course of business, to product liability lawsuits. To the extent permitted under applicable laws, the Company’s exposure to losses from these lawsuits is mitigated by insurance with self-insurance retention limits. The Company’s reserve is based upon two estimates. First, the Company tracks the population of all outstanding product liability cases to determine an appropriate case reserve for each based upon its best judgment and the advice of legal counsel. These estimates are continuously evaluated and adjusted based upon changes to the facts and circumstances surrounding the case. Second, the Company determines the amount of additional reserve required to cover incurred, but not reported, product liability issues and to account for possible adverse development of the established case reserves (collectively referred to as “IBNR”). The Company has established a position within the actuarially determined range, which it believes is the best estimate of the IBNR liability.

Income Taxes – The Company accounts for income taxes under the guidance of ASC Topic 740-10, “Income Taxes.” Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between financial statement carrying amounts of existing assets and liabilities and their respective tax bases and operating loss and tax credit carryforwards. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The Company records a valuation allowance that represents a reserve on deferred tax assets for which utilization is not more likely than not. Management judgment is required in determining its provision for income taxes, deferred tax assets and liabilities, and the valuation allowance recorded against its net deferred tax assets. The Company does not currently provide for additional U.S. and non-U.S. income taxes which would become payable upon repatriation of undistributed earnings of non-U.S. subsidiaries.

The Company measures and records income tax contingency accruals under the guidance of ASC Topic 740-10. The Company recognizes liabilities for uncertain income tax positions based on a two-step process. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained on audit, including resolution of related appeals or litigation processes, if any. The second step requires the Company to estimate and measure the tax benefit as the largest amount that is more than 50% likely to be realized upon ultimate settlement. It is inherently difficult and subjective to estimate such amounts, as the Company must determine the probability of various possible outcomes. The Company reevaluates these uncertain tax positions on a quarterly basis or when new information becomes available to management. These reevaluations are based on factors including, but not limited to, changes in facts or circumstances, changes in tax law, successfully settled issues under audit, expirations due to statutes, and new audit activity. Such a change in recognition or measurement could result in the recognition of a tax benefit or an increase to the tax accrual.

Warranties – In the normal course of business, the Company provides its customers warranties covering workmanship, and in some cases materials, on products manufactured. Such warranties generally provide that products will be free from defects for periods ranging from 12 months to 60 months with certain equipment having longer-term warranties. If a product fails to comply with the Company’s warranties, it may be obligated, at its expense, to correct any defect by repairing or replacing such defective product. The Company provides for an estimate of costs that may be incurred under its warranties at the time product revenue is recognized based on historical warranty experience for the related product or estimates of projected losses due to specific warranty issues on new products. These costs primarily include labor and materials, as necessary, associated with repair or replacement. The primary factors that affect the Company’s warranty liabilities include the number of shipped units and historical and anticipated rates or warranty claims. As these factors are impacted by actual experience and future expectations, the Company assesses the adequacy of its recorded warranty liability and adjusts the amounts as necessary.

Recent Accounting Changes and Pronouncements

In December 2019, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2019-12 “Income Taxes (Topic 740).” The amendments in this ASU simplify accounting for income taxes by removing certain exceptions to the general principles in Topic 740. The amendments also improve consistent application of and simplify GAAP for other areas of Topic 740 by clarifying and amending existing guidance. The standard is effective for annual periods

38

Table of Contents

beginning after December 15, 2020. The adoption of ASU 2019-02 did not have a material impact on the Company’s consolidated financial statements.

Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

See Liquidity and Capital Resources, and Financial Risk Management in Management’s Discussion and Analysis of Financial Condition and Results of Operations for a description of the quantitative and qualitative disclosure about market risk.

39

Table of Contents

Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Index to Consolidated Financial Statements:

40

Table of Contents

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Stockholders of The Manitowoc Company, Inc.

Opinions on the Financial Statements and Internal Control over Financial Reporting

We have audited the accompanying consolidated balance sheets of The Manitowoc Company, Inc. and its subsidiaries (the “Company”) as of December 31, 2021 and 2020, and the related consolidated statements of operations, of comprehensive income, of equity and of cash flows for each of the three years in the period ended December 31, 2021, including the related notes and schedule of valuation and qualifying accounts for each of the three years in the period ended December 31, 2021 appearing under Item 15(a)(2) (collectively referred to as the “consolidated financial statements”). We also have audited the Company's internal control over financial reporting as of December 31, 2021, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of the Company as of December 31, 2021 and 2020, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2021 in conformity with accounting principles generally accepted in the United States of America. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2021, based on criteria established in Internal Control - Integrated Framework (2013) issued by the COSO.

Basis for Opinions

The Company's management is responsible for these consolidated financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on the Company’s consolidated financial statements and on the Company's internal control over financial reporting based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud, and whether effective internal control over financial reporting was maintained in all material respects.

Our audits of the consolidated financial statements included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

As described in Management’s Report on Internal Control over Financial Reporting, management has excluded Aspen Equipment and H&E Equipment from its assessment of internal control over financial reporting as of December 31, 2021 because they were acquired by the Company in purchase business combinations during 2021. We have also excluded Aspen Equipment and H&E Equipment from our audit of internal control over financial reporting. Aspen Equipment and H&E Equipment are wholly-owned subsidiaries whose total assets and total revenues excluded from management’s assessment and our audit of internal control over financial reporting represent approximately 3% and 9% of total assets, respectively, and

41

Table of Contents

approximately 1% and 3% of total revenues, respectively, of the related consolidated financial statement amounts as of and for the year ended December 31, 2021.

Definition and Limitations of Internal Control over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Critical Audit Matters

The critical audit matter communicated below is a matter arising from the current period audit of the consolidated financial statements that was communicated or required to be communicated to the audit committee and that (i) relates to accounts or disclosures that are material to the consolidated financial statements and (ii) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the consolidated financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.

Goodwill Impairment Test

As described in Notes 2 and 10 to the consolidated financial statements, the Company’s consolidated goodwill balance was $249.7 million as of December 31, 2021. Management tests for impairment of goodwill annually in the fourth quarter. To test goodwill, management uses the income approach and market approach with a weighting of 70/30, respectively, to fair value each reporting unit, subject to a comparison for reasonableness to its market capitalization at the date of valuation. If the carrying amount exceeds the fair value, an impairment loss is recognized in an amount equal to that excess, not to exceed the carrying amount of the goodwill. In addition, goodwill of a reporting unit is tested for impairment between annual tests if an event occurs or circumstances change that would more-likely-than-not reduce the fair value of a reporting unit below its carrying value. A considerable amount of management judgment and assumptions are required in performing the impairment tests as it relates to revenue growth rates and projected operating income.

The principal considerations for our determination that performing procedures relating to the goodwill impairment test is a critical audit matter are (i) the significant judgment by management when developing the fair value of the reporting units and (ii) a high degree of auditor judgment, subjectivity, and effort in performing procedures and evaluating management’s significant assumptions related to revenue growth rates and projected operating income.

Addressing the matter involved performing procedures and evaluating audit evidence in connection with forming our overall opinion on the consolidated financial statements. These procedures included testing the effectiveness of controls relating to management’s goodwill test, including controls over the determination of the fair value of the reporting units. These procedures also included, among others (i) testing management’s process for developing the fair value of the reporting units, (ii) evaluating the appropriateness of the method, (iii) testing the completeness, accuracy, and relevance of underlying data, and (iv) evaluating the reasonableness of the significant assumptions related to revenue growth rates and projected operating income. Evaluating management’s assumptions related to the revenue growth rates and projected operating income involved evaluating whether the assumptions used by management were reasonable considering (i) the current and past performance of the

42

Table of Contents

reporting units, (ii) the consistency with external market and industry data, and (iii) whether these assumptions were consistent with evidence obtained in other areas of the audit.

/s/ PricewaterhouseCoopers LLP

Milwaukee, Wisconsin

February 22, 2022

We have served as the Company’s auditor since 1995.

43

Table of Contents

The Manitowoc Company, Inc.

Consolidated Statements of Operations

For the years ended December 31, 2021, 2020 and 2019